diff options
Diffstat (limited to 'arch')
95 files changed, 3464 insertions, 1113 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 31aa54f0428c..1a29403400b7 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb @@ -75,6 +76,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb @@ -83,9 +85,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r0.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r1.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb @@ -100,10 +100,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb @@ -118,8 +114,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb @@ -200,3 +194,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index fe6c415e8229..c965a8c81d9b 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -63,7 +63,6 @@ }; clocks { - compatible = "simple-bus"; divclk4: divclk4 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -146,7 +145,6 @@ &blsp1_spi1 { /* On Low speed expansion */ - label = "LS-SPI0"; status = "okay"; }; @@ -183,7 +181,6 @@ &blsp2_spi6 { /* On High speed expansion */ - label = "HS-SPI1"; status = "okay"; }; @@ -974,6 +971,50 @@ }; }; +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "DB820c"; @@ -1026,7 +1067,7 @@ platform { sound-dai = <&q6routing>; - }; + }; codec { sound-dai = <&wcd9335 AIF4_PB>; @@ -1095,21 +1136,8 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - }; &venus { status = "okay"; }; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts new file mode 100644 index 000000000000..702013b867d7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 AP-MI01.2 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.2"; + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi new file mode 100644 index 000000000000..04ef80f267bf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,apss-ipq.h> +#include <dt-bindings/clock/qcom,ipq5332-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq5332", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + clock-latency-ns = <200000>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_mem: tz@4a600000 { + reg = <0x0 0x4a600000 0x0 0x200000>; + no-map; + }; + + smem@4a800000 { + compatible = "qcom,smem"; + reg = <0x0 0x4a800000 0x0 0x00100000>; + no-map; + + hwlocks = <&tcsr_mutex 0>; + }; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5332-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 53>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_0_pins: serial0-state { + pins = "gpio18", "gpio19"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq5332-gcc"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq5332", "syscon"; + reg = <0x01937000 0x21000>; + }; + + sdhc: mmc@7804000 { + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + status = "disabled"; + }; + + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00000000 0xffd>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5332-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo_board>; + clock-names = "pll", "xo"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq5332-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index 2aee8594b280..f5f4827c0e17 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -35,7 +35,6 @@ }; &blsp1_spi1 { - cs-select = <0>; pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index bbd94025ff5d..9ff4e9d45065 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -738,8 +738,8 @@ phys = <&pcie_phy0>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>, - <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>; + ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>, + <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 62d05d740646..fe37dcdc52c8 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -397,7 +397,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sdhc_1: mmc@7824900 { @@ -780,10 +779,8 @@ phys = <&pcie_phy1>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x10200000 0x10200000 - 0 0x10000>, /* downstream I/O */ - <0x82000000 0 0x10220000 0x10220000 - 0 0xfde0000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -844,10 +841,8 @@ phys = <&pcie_phy0>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x20200000 0x20200000 - 0 0x10000>, /* downstream I/O */ - <0x82000000 0 0x20220000 0x20220000 - 0 0xfde0000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 0733c2f4f379..639b158b4fbe 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -503,7 +503,7 @@ bits = <1 7>; }; - tsens_mode: mode@ec { + tsens_mode: mode@ef { reg = <0xef 0x1>; bits = <5 3>; }; @@ -2180,7 +2180,6 @@ }; }; }; - }; timer { diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 610f3e3fc0c2..da00c2f04cda 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -269,7 +269,7 @@ compatible = "qcom,rpm-msm8953"; qcom,smd-channels = "rpm_requests"; - rpmcc: rpmcc { + rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; clocks = <&xo_board>; clock-names = "xo"; @@ -281,9 +281,6 @@ #power-domain-cells = <1>; operating-points-v2 = <&rpmpd_opp_table>; - clocks = <&xo_board>; - clock-names = "ref"; - rpmpd_opp_table: opp-table { compatible = "operating-points-v2"; diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi index 67baced639c9..085d79542e1b 100644 --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi @@ -280,3 +280,7 @@ vdda3p3-supply = <&pm8950_l13>; status = "okay"; }; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index 2d360d05aa5e..05929d7a1d23 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -20,6 +20,13 @@ chosen { }; + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -351,6 +358,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; #clock-cells = <1>; }; @@ -809,7 +818,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sdhc_1: mmc@7824000 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 4520a7e86d5b..e9480c4208f6 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -46,8 +46,6 @@ }; clocks { - compatible = "simple-bus"; - divclk4: divclk4 { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 9ff9d35496d2..768fe2326933 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -242,7 +242,7 @@ compatible = "qcom,rpm-msm8994"; qcom,smd-channels = "rpm_requests"; - rpmcc: rpmcc { + rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc"; #clock-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi index 2994337c6046..2adadc1e5b7c 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -85,10 +85,6 @@ }; }; -&adsp_pil { - status = "okay"; -}; - &blsp1_i2c3 { status = "okay"; @@ -183,10 +179,6 @@ status = "okay"; }; -&gpu { - status = "okay"; -}; - &hsusb_phy1 { vdd-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; @@ -215,7 +207,6 @@ &mss_pil { pll-supply = <&vreg_l12a_1p8>; - status = "okay"; }; &pcie0 { @@ -504,8 +495,48 @@ }; }; -&slpi_pil { +&slim_msm { status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; }; &sound { @@ -768,19 +799,3 @@ maximum-speed = "high-speed"; }; - -&venus { - status = "okay"; -}; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts index 1bdc1b134305..dfe75119b8d2 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts @@ -17,6 +17,7 @@ &adsp_pil { firmware-name = "qcom/msm8996/oneplus3/adsp.mbn"; + status = "okay"; }; &battery { @@ -25,6 +26,8 @@ }; &gpu { + status = "okay"; + zap-shader { firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; }; @@ -33,12 +36,15 @@ &mss_pil { firmware-name = "qcom/msm8996/oneplus3/mba.mbn", "qcom/msm8996/oneplus3/modem.mbn"; + status = "okay"; }; &slpi_pil { firmware-name = "qcom/msm8996/oneplus3/slpi.mbn"; + status = "okay"; }; &venus { firmware-name = "qcom/msm8996/oneplus3/venus.mbn"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts index 34f837dd0c12..51fce65e89f1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts @@ -18,6 +18,7 @@ &adsp_pil { firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn"; + status = "okay"; }; &battery { @@ -26,6 +27,8 @@ }; &gpu { + status = "okay"; + zap-shader { firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; }; @@ -34,12 +37,15 @@ &mss_pil { firmware-name = "qcom/msm8996/oneplus3t/mba.mbn", "qcom/msm8996/oneplus3t/modem.mbn"; + status = "okay"; }; &slpi_pil { firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn"; + status = "okay"; }; &venus { firmware-name = "qcom/msm8996/oneplus3t/venus.mbn"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 2acfed28e3cb..1ce5df0a3405 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -12,8 +12,6 @@ / { clocks { - compatible = "simple-bus"; - divclk1_cdc: divclk1 { compatible = "gpio-gate-clock"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>; @@ -337,6 +335,52 @@ }; }; +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&divclk1_cdc>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-vbat-supply = <&vph_pwr>; + vdd-micbias-supply = <&vph_pwr_bbyp>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + &slpi_pil { status = "okay"; @@ -395,20 +439,6 @@ status = "okay"; }; -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&divclk1_cdc>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-vbat-supply = <&vph_pwr>; - vdd-micbias-supply = <&vph_pwr_bbyp>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; - &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 905678e7175d..4661a556772e 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1851,8 +1851,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, - <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>, + <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; device_type = "pci"; @@ -1882,7 +1882,6 @@ "cfg", "bus_master", "bus_slave"; - }; pcie1: pcie@608000 { @@ -1905,8 +1904,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, - <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>, + <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; device_type = "pci"; @@ -1956,8 +1955,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, - <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>, + <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; device_type = "pci"; @@ -3006,8 +3005,11 @@ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy1>, <&ssusb_phy_0>; phy-names = "usb2-phy", "usb3-phy"; + snps,hird-threshold = /bits/ 8 <0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,is-utmi-l1-suspend; + tx-fifo-resize; }; }; @@ -3383,36 +3385,8 @@ dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; - slim@1 { - reg = <1>; - #address-cells = <2>; - #size-cells = <0>; - - tasha_ifd: tas-ifd@0,0 { - compatible = "slim217,1a0"; - reg = <0 0>; - }; - - wcd9335: codec@1,0 { - pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; - pinctrl-names = "default"; - - compatible = "slim217,1a0"; - reg = <1 0>; - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "intr1", "intr2"; - interrupt-controller; - #interrupt-cells = <1>; - reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; - - slim-ifc-dev = <&tasha_ifd>; - - #sound-dai-cells = <1>; - }; - }; + status = "disabled"; }; adsp_pil: remoteproc@9300000 { @@ -3496,7 +3470,6 @@ }; }; }; - }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 5aad9f05780a..8b71b1f8f300 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -44,7 +44,7 @@ label = "Keyboard Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; debounce-interval = <15>; - gpio-key,wakeup; + wakeup-source; linux,input-type = <EV_SW>; linux,code = <SW_KEYPAD_SLIDE>; }; @@ -116,7 +116,7 @@ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEUP>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 820414758888..fa02e45f1c24 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -106,7 +106,7 @@ gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEDOWN>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; @@ -138,7 +138,7 @@ gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <30>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 8bc1c59127e5..09b222f363c2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -922,7 +922,7 @@ phy-names = "pciephy"; status = "disabled"; - ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>, <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; #interrupt-cells = <1>; @@ -1524,7 +1524,7 @@ compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x06002000 0x1000>, <0x16280000 0x180000>; - reg-names = "stm-base", "stm-data-base"; + reg-names = "stm-base", "stm-stimulus-base"; status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -1993,7 +1993,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; usb3: usb@a8f8800 { diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index fc0eccaccdf6..4bc717917f44 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm660 { + pm660-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index f9b3864bd3b9..87b71b7205b8 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm660l { + pm660l-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index 135bfb8d629b..cca45fad75ac 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -116,6 +116,12 @@ #address-cells = <1>; #size-cells = <0>; + pm8150l_flash: led-controller@d300 { + compatible = "qcom,pm8150l-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + pm8150l_lpg: pwm { compatible = "qcom,pm8150l-lpg"; diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi index 16bcfb64d735..72609f31c890 100644 --- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi @@ -55,5 +55,11 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pm8550b_eusb2_repeater: phy@fd00 { + compatible = "qcom,pm8550b-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index adbba9f4089a..340033ac3186 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -72,7 +72,7 @@ }; pm8998_coincell: charger@2800 { - compatible = "qcom,pm8941-coincell"; + compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index bc2ed73afb74..42fc33ab8b2e 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1469,8 +1469,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x10003000 0 0x00010000>, /* I/O */ - <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */ + ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */ + <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index f234159d2060..99d784085fb3 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -27,6 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD0>; power-domain-names = "psci"; @@ -45,6 +46,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD1>; power-domain-names = "psci"; @@ -60,6 +62,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD2>; power-domain-names = "psci"; @@ -75,6 +78,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD3>; power-domain-names = "psci"; @@ -412,8 +416,6 @@ pinctrl-0 = <&qup_uart0_default>; pinctrl-names = "default"; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -581,8 +583,6 @@ pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; pinctrl-names = "default"; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; }; @@ -1312,6 +1312,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; gem_noc: interconnect@19100000 { diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 459384ec8f23..339fea522509 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -17,6 +17,7 @@ aliases { serial0 = &uart2; + serial1 = &uart9; }; chosen { @@ -400,6 +401,10 @@ status = "okay"; }; +&uart9 { + status = "okay"; +}; + &ufs_mem_hc { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts new file mode 100644 index 000000000000..1020dfd21da2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include "sa8775p.dtsi" + +/ { + model = "Qualcomm SA8775P Ride"; + compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; + + aliases { + serial0 = &uart10; + serial1 = &uart12; + serial2 = &uart17; + i2c18 = &i2c18; + spi16 = &spi16; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c18 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c18_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&spi16 { + pinctrl-0 = <&qup_spi16_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + qup_uart10_default: qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + + qup_spi16_default: qup-spi16-state { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c18_default: qup-i2c18-state { + pins = "gpio95", "gpio96"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart12_default: qup-uart12-state { + qup_uart12_cts: qup-uart12-cts-pins { + pins = "gpio52"; + function = "qup1_se5"; + bias-disable; + }; + + qup_uart12_rts: qup-uart12-rts-pins { + pins = "gpio53"; + function = "qup1_se5"; + bias-pull-down; + }; + + qup_uart12_tx: qup-uart12-tx-pins { + pins = "gpio54"; + function = "qup1_se5"; + bias-pull-up; + }; + + qup_uart12_rx: qup-uart12-rx-pins { + pins = "gpio55"; + function = "qup1_se5"; + bias-pull-down; + }; + }; + + qup_uart17_default: qup-uart17-state { + qup_uart17_cts: qup-uart17-cts-pins { + pins = "gpio91"; + function = "qup2_se3"; + bias-disable; + }; + + qup_uart17_rts: qup0-uart17-rts-pins { + pins = "gpio92"; + function = "qup2_se3"; + bias-pull-down; + }; + + qup_uart17_tx: qup0-uart17-tx-pins { + pins = "gpio93"; + function = "qup2_se3"; + bias-pull-up; + }; + + qup_uart17_rx: qup0-uart17-rx-pins { + pins = "gpio94"; + function = "qup2_se3"; + bias-pull-down; + }; + }; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + pinctrl-0 = <&qup_uart10_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart12 { + pinctrl-0 = <&qup_uart12_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart17 { + pinctrl-0 = <&qup_uart17_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi new file mode 100644 index 000000000000..c5b73c591e0f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -0,0 +1,912 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sa8775p-gcc.h> +#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@10000 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10000>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + L3_1: l3-cache { + compatible = "cache"; + }; + + }; + }; + + CPU5: cpu@10100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10100>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + CPU6: cpu@10200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10200>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + CPU7: cpu@10300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10300>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sa8775p", "qcom,scm"; + }; + }; + + aggre1_noc: interconnect-aggre1-noc { + compatible = "qcom,sa8775p-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect-aggre2-noc { + compatible = "qcom,sa8775p-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sa8775p-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect-config-noc { + compatible = "qcom,sa8775p-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect-dc-noc { + compatible = "qcom,sa8775p-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect-gem-noc { + compatible = "qcom,sa8775p-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gpdsp_anoc: interconnect-gpdsp-anoc { + compatible = "qcom,sa8775p-gpdsp-anoc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect-lpass-ag-noc { + compatible = "qcom,sa8775p-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sa8775p-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect-mmss-noc { + compatible = "qcom,sa8775p-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspa_noc: interconnect-nspa-noc { + compatible = "qcom,sa8775p-nspa-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspb_noc: interconnect-nspb-noc { + compatible = "qcom,sa8775p-nspb-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_anoc: interconnect-pcie-anoc { + compatible = "qcom,sa8775p-pcie-anoc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect-system-noc { + compatible = "qcom,sa8775p-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + /* Will be updated by the bootloader. */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x0>; + }; + + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + sail_ss_mem: sail-ss@80000000 { + reg = <0x0 0x80000000 0x0 0x10000000>; + no-map; + }; + + hyp_mem: hyp@90000000 { + reg = <0x0 0x90000000 0x0 0x600000>; + no-map; + }; + + xbl_boot_mem: xbl-boot@90600000 { + reg = <0x0 0x90600000 0x0 0x200000>; + no-map; + }; + + aop_image_mem: aop-image@90800000 { + reg = <0x0 0x90800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@90860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x90860000 0x0 0x20000>; + no-map; + }; + + uefi_log: uefi-log@908b0000 { + reg = <0x0 0x908b0000 0x0 0x10000>; + no-map; + }; + + reserved_mem: reserved@908f0000 { + reg = <0x0 0x908f0000 0x0 0xf000>; + no-map; + }; + + secdata_apss_mem: secdata-apss@908ff000 { + reg = <0x0 0x908ff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@90900000 { + compatible = "qcom,smem"; + reg = <0x0 0x90900000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + cpucp_fw_mem: cpucp-fw@90b00000 { + reg = <0x0 0x90b00000 0x0 0x100000>; + no-map; + }; + + lpass_machine_learning_mem: lpass-machine-learning@93b00000 { + reg = <0x0 0x93b00000 0x0 0xf00000>; + no-map; + }; + + adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 { + reg = <0x0 0x94a00000 0x0 0x800000>; + no-map; + }; + + pil_camera_mem: pil-camera@95200000 { + reg = <0x0 0x95200000 0x0 0x500000>; + no-map; + }; + + pil_adsp_mem: pil-adsp@95c00000 { + reg = <0x0 0x95c00000 0x0 0x1e00000>; + no-map; + }; + + pil_gdsp0_mem: pil-gdsp0@97b00000 { + reg = <0x0 0x97b00000 0x0 0x1e00000>; + no-map; + }; + + pil_gdsp1_mem: pil-gdsp1@99900000 { + reg = <0x0 0x99900000 0x0 0x1e00000>; + no-map; + }; + + pil_cdsp0_mem: pil-cdsp0@9b800000 { + reg = <0x0 0x9b800000 0x0 0x1e00000>; + no-map; + }; + + pil_gpu_mem: pil-gpu@9d600000 { + reg = <0x0 0x9d600000 0x0 0x2000>; + no-map; + }; + + pil_cdsp1_mem: pil-cdsp1@9d700000 { + reg = <0x0 0x9d700000 0x0 0x1e00000>; + no-map; + }; + + pil_cvp_mem: pil-cvp@9f500000 { + reg = <0x0 0x9f500000 0x0 0x700000>; + no-map; + }; + + pil_video_mem: pil-video@9fc00000 { + reg = <0x0 0x9fc00000 0x0 0x700000>; + no-map; + }; + + hyptz_reserved_mem: hyptz-reserved@beb00000 { + reg = <0x0 0xbeb00000 0x0 0x11500000>; + no-map; + }; + + tz_stat_mem: tz-stat@d0000000 { + reg = <0x0 0xd0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@d0100000 { + reg = <0x0 0xd0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@d1300000 { + reg = <0x0 0xd1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@d1800000 { + reg = <0x0 0xd1800000 0x0 0x3900000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,sa8775p-gcc"; + reg = <0x0 0x100000 0x0 0xc7018>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SA8775P_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sa8775p-ipcc", "qcom,ipcc"; + reg = <0x0 0x408000 0x0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0xac0000 0x0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x443 0x0>; + status = "disabled"; + + uart10: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa8c000 0x0 0x4000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interconnect-names = "qup-core", "qup-config"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 + &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_QUP_1 0>; + power-domains = <&rpmhpd SA8775P_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + uart12: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a94000 0x0 0x4000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x5a3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + spi16: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart17: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x0088c000 0x0 0x4000>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c18: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + memtimer: timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + ranges = <0x0 0x0 0x0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17c21000 { + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@17c23000 { + reg = <0x17c23000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@17c25000 { + reg = <0x17c25000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@17c27000 { + reg = <0x17c27000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@17c29000 { + reg = <0x17c29000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@17c2b000 { + reg = <0x17c2b000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@17c2d000 { + reg = <0x17c2d000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 0>; + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sa8775p-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sa8775p-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-0 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp-1 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp-4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp-5 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-8 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x1f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sa8775p-cpufreq-epss", + "qcom,cpufreq-epss"; + reg = <0x0 0x18591000 0x0 0x1000>, + <0x0 0x18593000 0x0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,sa8775p-tlmm"; + reg = <0x0 0xf000000 0x0 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 149>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + arch_timer: timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index c3bdd3295c02..fcabbc6a897f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -312,14 +312,9 @@ reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel0_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts deleted file mode 100644 index 3abd6222fe46..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts +++ /dev/null @@ -1,38 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Kingoftown board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-ti-sn65dsi86.dtsi" -#include "sc7180-trogdor-kingoftown.dtsi" - -/ { - model = "Google Kingoftown (rev0)"; - compatible = "google,kingoftown-rev0", "qcom,sc7180"; -}; - -/* - * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a - * power rail instead, since kingoftown does not have FP. - */ -&pp3300_fp_tp { - gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; -}; - -&tlmm { - en_fp_rails: en-fp-rails-state { - pins = "gpio74"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts deleted file mode 100644 index e0752ba7df11..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts +++ /dev/null @@ -1,17 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Kingoftown board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-parade-ps8640.dtsi" -#include "sc7180-trogdor-kingoftown.dtsi" - -/ { - model = "Google Kingoftown (rev1+)"; - compatible = "google,kingoftown", "qcom,sc7180"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts index 315ac5eb5f78..36326ef972dc 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts @@ -5,10 +5,18 @@ * Copyright 2021 Google LLC. */ -/* This file must be included after sc7180-trogdor.dtsi */ +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" #include <arm/cros-ec-keyboard.dtsi> #include "sc7180-trogdor-lte-sku.dtsi" +/ { + model = "Google Kingoftown"; + compatible = "google,kingoftown", "qcom,sc7180"; +}; + &alc5682 { compatible = "realtek,rt5682s"; /delete-property/ VBAT-supply; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts index 235cda2bba5e..7f01573b5543 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -23,7 +23,7 @@ /delete-node/&ap_ts; &panel { - compatible = "innolux,n116bca-ea1", "innolux,n116bge"; + compatible = "innolux,n116bca-ea1"; }; &sdhc_2 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts deleted file mode 100644 index d49de65aa960..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ /dev/null @@ -1,34 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Lazor board device tree source - * - * Copyright 2020 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-ti-sn65dsi86.dtsi" -#include "sc7180-trogdor-lazor.dtsi" - -/ { - model = "Google Lazor (rev0)"; - compatible = "google,lazor-rev0", "qcom,sc7180"; -}; - -&sn65dsi86_out { - /* - * Lane 0 was incorrectly mapped on the cable, but we've now decided - * that the cable is canon and in -rev1+ we'll make a board change - * that means we no longer need the swizzle. - */ - lane-polarities = <1 0>; -}; - -&usb_hub_2_x { - vdd-supply = <&pp3300_l7c>; -}; - -&usb_hub_3_x { - vdd-supply = <&pp3300_l7c>; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts deleted file mode 100644 index 2767817fb053..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x0 => 0 - * - bits 7..4: Panel ID: 0x0 (AUO) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland-rev0.dtsi" - -/ { - model = "Google Mrbland rev0 AUO panel board"; - compatible = "google,mrbland-rev0-sku0", "qcom,sc7180"; -}; - -&panel { - compatible = "auo,b101uan08.3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts deleted file mode 100644 index 711485574a03..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x10 => 16 - * - bits 7..4: Panel ID: 0x1 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland-rev0.dtsi" - -/ { - model = "Google Mrbland rev0 BOE panel board"; - compatible = "google,mrbland-rev0-sku16", "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv101wum-n53"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi deleted file mode 100644 index f4c1f3813664..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi +++ /dev/null @@ -1,36 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -&avdd_lcd { - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; -}; - -&panel { - enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; -}; - -&v1p8_mipi { - gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */ -&avdd_lcd_en { - pins = "gpio80"; -}; - -&mipi_1800_en { - pins = "gpio81"; -}; - -&vdd_reset_1800 { - pins = "gpio76"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts deleted file mode 100644 index 275313ef7554..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x600 => 1536 - * - bits 11..8: Panel ID: 0x6 (AUO) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -/ { - model = "Google Mrbland rev1+ AUO panel board"; - compatible = "google,mrbland-sku1536", "qcom,sc7180"; -}; - -&panel { - compatible = "auo,b101uan08.3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts deleted file mode 100644 index 87c6b6c30b5e..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts +++ /dev/null @@ -1,24 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x300 => 768 - * - bits 11..8: Panel ID: 0x3 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -/ { - model = "Google Mrbland (rev1 - 2) BOE panel board"; - /* Uses ID 768 on rev1 and 1024 on rev2+ */ - compatible = "google,mrbland-sku1024", "google,mrbland-sku768", - "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv101wum-n53"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi deleted file mode 100644 index ed12ee35f06b..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi +++ /dev/null @@ -1,320 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" - -/* This board only has 1 USB Type-C port. */ -/delete-node/ &usb_c1; - -/ { - avdd_lcd: avdd-lcd-regulator { - compatible = "regulator-fixed"; - regulator-name = "avdd_lcd"; - - gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_lcd_en>; - - vin-supply = <&pp5000_a>; - }; - - avee_lcd: avee-lcd-regulator { - compatible = "regulator-fixed"; - regulator-name = "avee_lcd"; - - gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&avee_lcd_en>; - - vin-supply = <&pp5000_a>; - }; - - v1p8_mipi: v1p8-mipi-regulator { - compatible = "regulator-fixed"; - regulator-name = "v1p8_mipi"; - - gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&mipi_1800_en>; - - vin-supply = <&pp3300_a>; - }; -}; - -&backlight { - pwms = <&cros_ec_pwm 0>; -}; - -&camcc { - status = "okay"; -}; - -&cros_ec { - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; -}; - -&dsi0 { - - panel: panel@0 { - /* Compatible will be filled in per-board */ - reg = <0>; - enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vdd_reset_1800>; - avdd-supply = <&avdd_lcd>; - avee-supply = <&avee_lcd>; - pp1800-supply = <&v1p8_mipi>; - pp3300-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - rotation = <270>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&gpio_keys { - status = "okay"; -}; - -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@5d { - compatible = "goodix,gt7375p"; - reg = <0x5d>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - - reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; - - vdd-supply = <&pp3300_ts>; - }; -}; - -&pp1800_uf_cam { - status = "okay"; -}; - -&pp1800_wf_cam { - status = "okay"; -}; - -&pp2800_uf_cam { - status = "okay"; -}; - -&pp2800_wf_cam { - status = "okay"; -}; - -&wifi { - qcom,ath10k-calibration-variant = "GO_MRBLAND"; -}; - -/* - * No eDP on this board but it's logically the same signal so just give it - * a new name and assign the proper GPIO. - */ -pp3300_disp_on: &pp3300_dx_edp { - gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor.dtsi */ - -/* - * No eDP on this board but it's logically the same signal so just give it - * a new name and assign the proper GPIO. - */ - -tp_en: &en_pp3300_dx_edp { - pins = "gpio85"; -}; - -/* PINCTRL - board-specific pinctrl */ - -&tlmm { - gpio-line-names = "HUB_RST_L", - "AP_RAM_ID0", - "AP_SKU_ID2", - "AP_RAM_ID1", - "", - "AP_RAM_ID2", - "UF_CAM_EN", - "WF_CAM_EN", - "TS_RESET_L", - "TS_INT_L", - "", - "", - "AP_EDP_BKLTEN", - "UF_CAM_MCLK", - "WF_CAM_CLK", - "", - "", - "UF_CAM_SDA", - "UF_CAM_SCL", - "WF_CAM_SDA", - "WF_CAM_SCL", - "AVEE_LCD_EN", - "", - "AMP_EN", - "", - "", - "", - "", - "HP_IRQ", - "WF_CAM_RST_L", - "UF_CAM_RST_L", - "AP_BRD_ID2", - "", - "AP_BRD_ID0", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - "AP_H1_SPI_CLK", - "AP_H1_SPI_CS_L", - "BT_UART_CTS", - "BT_UART_RTS", - "BT_UART_TXD", - "BT_UART_RXD", - "H1_AP_INT_ODL", - "", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "HP_I2C_SDA", - "HP_I2C_SCL", - "FORCED_USB_BOOT", - "AMP_BCLK", - "AMP_LRCLK", - "AMP_DIN", - "PEN_DET_ODL", - "HP_BCLK", - "HP_LRCLK", - "HP_DOUT", - "HP_DIN", - "HP_MCLK", - "AP_SKU_ID0", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "AP_SPI_CLK", - "AP_SPI_MOSI", - "AP_SPI_MISO", - /* - * AP_FLASH_WP_L is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_L. - */ - "AP_FLASH_WP_L", - "", - "AP_SPI_CS0_L", - "", - "", - "", - "", - "WLAN_SW_CTRL", - "", - "REPORT_E", - "", - "ID0", - "", - "ID1", - "", - "", - "", - "CODEC_PWR_EN", - "HUB_EN", - "TP_EN", - "MIPI_1.8V_EN", - "VDD_RESET_1.8V", - "AVDD_LCD_EN", - "", - "AP_SKU_ID1", - "AP_RST_REQ", - "", - "AP_BRD_ID1", - "AP_EC_INT_L", - "SDM_GRFC_3", - "", - "", - "BOOT_CONFIG_4", - "BOOT_CONFIG_2", - "", - "", - "", - "", - "", - "", - "", - "BOOT_CONFIG_3", - "WCI2_LTE_COEX_TXD", - "WCI2_LTE_COEX_RXD", - "", - "", - "", - "", - "FORCED_USB_BOOT_POL", - "AP_TS_PEN_I2C_SDA", - "AP_TS_PEN_I2C_SCL", - "DP_HOT_PLUG_DET", - "EC_IN_RW_ODL"; - - avdd_lcd_en: avdd-lcd-en-state { - pins = "gpio88"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - avee_lcd_en: avee-lcd-en-state { - pins = "gpio21"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - mipi_1800_en: mipi-1800-en-state { - pins = "gpio86"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - vdd_reset_1800: vdd-reset-1800-state { - pins = "gpio87"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi index bc4f3b6c6634..273e2249f018 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi @@ -12,6 +12,7 @@ compatible = "realtek,rt5682s"; realtek,dmic1-clk-pin = <2>; realtek,dmic-clk-rate-hz = <2048000>; + /delete-property/ VBAT-supply; }; ap_ts_pen_1v8: &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index cb41ccdaccfd..8e7b42f843d4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -65,14 +65,9 @@ backlight = <&backlight>; rotation = <270>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts deleted file mode 100644 index d6ed7d0afe4a..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x10 => 16 - * - bits 7..4: Panel ID: 0x1 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler-rev0.dtsi" - -/ { - model = "Google Wormdingler rev0 BOE panel board"; - compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv110c9m-ll3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts deleted file mode 100644 index c03525ea64ca..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x0 => 0 - * - bits 7..4: Panel ID: 0x0 (INX) - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler-rev0.dtsi" - -/ { - model = "Google Wormdingler rev0 INX panel board"; - compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180"; -}; - -&panel { - compatible = "innolux,hj110iz-01a"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi deleted file mode 100644 index 7f272c6e95f6..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi +++ /dev/null @@ -1,36 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler.dtsi" - -&avdd_lcd { - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; -}; - -&panel { - enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; -}; - -&v1p8_mipi { - gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */ -&avdd_lcd_en { - pins = "gpio80"; -}; - -&mipi_1800_en { - pins = "gpio81"; -}; - -&vdd_reset_1800 { - pins = "gpio76"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 9832e752da35..262d6691abd9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -124,14 +124,9 @@ backlight = <&backlight>; rotation = <270>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index ebfa21e9ed8a..3c799b564b64 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -76,6 +76,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -103,6 +104,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -126,6 +128,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -149,6 +152,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -172,6 +176,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -195,6 +200,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -218,6 +224,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -241,6 +248,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -2760,7 +2768,7 @@ system-cache-controller@9200000 { compatible = "qcom,sc7180-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg-names = "llcc0_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -3019,7 +3027,6 @@ required-opps = <&rpmhpd_opp_nom>; }; }; - }; dsi0: dsi@ae94000 { @@ -3280,7 +3287,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sram@146aa000 { @@ -3570,7 +3576,7 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sc7180-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; @@ -3578,6 +3584,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; wifi: wifi@18800000 { diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index 1185141f348e..afae7f46b050 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -27,7 +27,7 @@ }; &apps_rsc { - pmg1110-regulators { + regulators-2 { compatible = "qcom,pmg1110-rpmh-regulators"; qcom,pmic-id = "k"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi index 1ca11a14104d..485f9942e128 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi @@ -94,6 +94,8 @@ hp_i2c: &i2c2 { interrupts = <101 IRQ_TYPE_EDGE_BOTH>; AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; MICVDD-supply = <&pp3300_codec>; realtek,dmic1-data-pin = <1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi index 69e7aa7b2f6c..8b855345e5c7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi @@ -76,6 +76,8 @@ hp_i2c: &i2c2 { interrupts = <101 IRQ_TYPE_EDGE_BOTH>; AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; MICVDD-supply = <&pp3300_codec>; realtek,dmic1-data-pin = <1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index 4e0b013e25f4..df39a64da923 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -40,7 +40,7 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ &apps_rsc { - pmg1110-regulators { + regulators-2 { compatible = "qcom,pmg1110-rpmh-regulators"; qcom,pmic-id = "k"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index ba64316b4427..15222e92e3f5 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -25,7 +25,7 @@ }; &apps_rsc { - pmr735a-regulators { + regulators-2 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 8b5293e7fd2a..5dc9bee28e7f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -70,7 +70,7 @@ gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEUP>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; linux,can-disable; }; @@ -184,7 +184,7 @@ }; &apps_rsc { - pm7325-regulators { + regulators-0 { compatible = "qcom,pm7325-rpmh-regulators"; qcom,pmic-id = "b"; @@ -279,7 +279,7 @@ }; }; - pm8350c-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 88204f794ccb..88b3586e389f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -87,7 +87,7 @@ * are left out of here since they are managed elsewhere. */ - pm7325-regulators { + regulators-0 { compatible = "qcom,pm7325-rpmh-regulators"; qcom,pmic-id = "b"; @@ -188,7 +188,7 @@ }; }; - pm8350c-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -354,14 +354,9 @@ backlight = <&pm8350c_pwm_backlight>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - edp_panel_in: endpoint { - remote-endpoint = <&mdss_edp_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_edp_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 8f4ab6bd2886..5e6f9f441f1a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -168,6 +168,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -193,6 +194,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -214,6 +216,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -235,6 +238,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -256,6 +260,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -277,6 +282,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -298,6 +304,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -319,6 +326,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -935,7 +943,6 @@ opp-avg-kBps = <390000 0>; }; }; - }; gpi_dma0: dma-controller@900000 { @@ -2077,7 +2084,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; @@ -2679,7 +2686,8 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x20000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -3291,7 +3299,6 @@ opp-avg-kBps = <200000 0>; }; }; - }; usb_1_hsphy: phy@88e3000 { @@ -3584,8 +3591,9 @@ system-cache-controller@9200000 { compatible = "qcom,sc7280-llcc"; - reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -3595,12 +3603,17 @@ <0 0x088e2000 0 0x1000>; interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; eud_ep: endpoint { remote-endpoint = <&usb2_role_switch>; }; }; port@1 { + reg = <1>; eud_con: endpoint { remote-endpoint = <&con_eud>; }; @@ -3611,7 +3624,11 @@ eud_typec: connector { compatible = "usb-c-connector"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; con_eud: endpoint { remote-endpoint = <&eud_con>; }; @@ -3750,7 +3767,6 @@ required-opps = <&rpmhpd_opp_turbo>; }; }; - }; videocc: clock-controller@aaf0000 { @@ -5339,6 +5355,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 98a0f1f9f01e..6b4e1541ee39 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -413,11 +413,9 @@ backlight = <&backlight>; - ports { - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss0_dp3_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; }; }; }; @@ -563,6 +561,21 @@ status = "okay"; }; +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + &qup0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 99c6d6574559..4884e22ccca1 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -363,7 +363,11 @@ compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; + vdd-l1-l4-supply = <&vreg_s12b>; + vdd-l2-l7-supply = <&vreg_bob>; vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; vreg_s10b: smps10 { regulator-name = "vreg_s10b"; @@ -416,7 +420,21 @@ regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; + vdd-bob-supply = <&vreg_vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1c>; + vdd-l2-l8-supply = <&vreg_s1c>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s11b>; + + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; vreg_l1c: ldo1 { regulator-name = "vreg_l1c"; @@ -453,6 +471,10 @@ qcom,pmic-id = "d"; vdd-l1-l4-supply = <&vreg_s11b>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; vreg_l3d: ldo3 { regulator-name = "vreg_l3d"; @@ -531,11 +553,9 @@ backlight = <&backlight>; power-supply = <&vreg_edp_3p3>; - ports { - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss0_dp3_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; }; }; }; @@ -574,6 +594,7 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&ts0_default>; @@ -584,7 +605,7 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&i2c21_default>; + pinctrl-0 = <&i2c21_default>, <&tpad_default>; status = "okay"; @@ -595,13 +616,9 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + vddl-supply = <&vreg_s10b>; wakeup-source; - - status = "disabled"; }; touchpad@2c { @@ -611,9 +628,7 @@ hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + vddl-supply = <&vreg_s10b>; wakeup-source; }; @@ -625,6 +640,7 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&kybd_default>; @@ -681,6 +697,23 @@ pinctrl-0 = <&pcie4_default>; status = "okay"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + qcom,ath11k-calibration-variant = "LE_X13S"; + }; + }; }; &pcie4_phy { @@ -770,6 +803,21 @@ status = "okay"; }; +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + &pmk8280_vadc { status = "okay"; @@ -1149,7 +1197,6 @@ hall_int_n_default: hall-int-n-state { pins = "gpio107"; function = "gpio"; - input-enable; bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index df7d28f7ae60..a0ba535bb6c9 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -59,8 +59,9 @@ #size-cells = <0>; pmk8280_pon: pon@1300 { - compatible = "qcom,pm8998-pon"; - reg = <0x1300>; + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; pmk8280_pon_pwrkey: pwrkey { compatible = "qcom,pmk8350-pwrkey"; @@ -95,6 +96,24 @@ #thermal-sensor-cells = <1>; status = "disabled"; }; + + pmk8280_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + wakeup-source; + status = "disabled"; + }; + + pmk8280_sdam_6: nvram@8500 { + compatible = "qcom,spmi-sdam"; + reg = <0x8500>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8500 0x100>; + status = "disabled"; + }; }; pmc8280_1: pmic@1 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 42bfa9fa5b96..af7bee14fa06 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -43,8 +43,9 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_0>; @@ -67,8 +68,9 @@ CPU1: cpu@100 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_100>; @@ -87,8 +89,9 @@ CPU2: cpu@200 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_200>; @@ -107,8 +110,9 @@ CPU3: cpu@300 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_300>; @@ -127,8 +131,9 @@ CPU4: cpu@400 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_400>; @@ -147,8 +152,9 @@ CPU5: cpu@500 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_500>; @@ -167,8 +173,9 @@ CPU6: cpu@600 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_600>; @@ -187,8 +194,9 @@ CPU7: cpu@700 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_700>; @@ -1657,7 +1665,7 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x30200000 0x0 0x30200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x30200000 0x0 0x100000>, <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -1756,7 +1764,7 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x32200000 0x0 0x32200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x32200000 0x0 0x100000>, <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -1853,7 +1861,7 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x34200000 0x0 0x34200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x34200000 0x0 0x100000>, <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -1953,7 +1961,7 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x38200000 0x0 0x38200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x38200000 0x0 0x100000>, <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -2050,7 +2058,7 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>, <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -2773,7 +2781,6 @@ drive-strength = <2>; slew-rate = <1>; bias-bus-hold; - }; }; @@ -2983,8 +2990,14 @@ system-cache-controller@9200000 { compatible = "qcom,sc8280xp-llcc"; - reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>, + <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>, + <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc4_base", "llcc5_base", + "llcc6_base", "llcc7_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -3253,7 +3266,7 @@ #sound-dai-cells = <0>; operating-points-v2 = <&mdss0_dp0_opp_table>; - power-domains = <&rpmhpd SC8280XP_CX>; + power-domains = <&rpmhpd SC8280XP_MMCX>; status = "disabled"; @@ -3331,7 +3344,7 @@ #sound-dai-cells = <0>; operating-points-v2 = <&mdss0_dp1_opp_table>; - power-domains = <&rpmhpd SC8280XP_CX>; + power-domains = <&rpmhpd SC8280XP_MMCX>; status = "disabled"; @@ -4040,6 +4053,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; remoteproc_nsp0: remoteproc@1b300000 { @@ -4398,7 +4412,6 @@ required-opps = <&rpmhpd_opp_nom>; }; }; - }; mdss1_dp1: displayport-controller@22098000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index e52580acd5c8..2ca713a3902a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -112,7 +112,7 @@ gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEDOWN>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 5827cda270a0..8bdb36a63474 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1189,7 +1189,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; usb3: usb@a8f8800 { @@ -1451,25 +1450,6 @@ <0>; }; - dsi_opp_table: opp-table-dsi { - compatible = "operating-points-v2"; - - opp-131250000 { - opp-hz = /bits/ 64 <131250000>; - required-opps = <&rpmpd_opp_svs>; - }; - - opp-210000000 { - opp-hz = /bits/ 64 <210000000>; - required-opps = <&rpmpd_opp_svs_plus>; - }; - - opp-262500000 { - opp-hz = /bits/ 64 <262500000>; - required-opps = <&rpmpd_opp_nom>; - }; - }; - mdss: display-subsystem@c900000 { compatible = "qcom,mdss"; reg = <0x0c900000 0x1000>, @@ -1611,6 +1591,25 @@ status = "disabled"; + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-131250000 { + opp-hz = /bits/ 64 <131250000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-210000000 { + opp-hz = /bits/ 64 <210000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-262500000 { + opp-hz = /bits/ 64 <262500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts index e3e61b9d1b9d..32a7bd59e1ec 100644 --- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -395,7 +395,6 @@ regulator-enable-ramp-delay = <500>; }; }; - }; &gcc { diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index 02f14692dd9d..c5f839dd1c6e 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,sdm670-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -430,6 +431,10 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>; clock-names = "iface", "core", "xo", "ice", "bus"; + interconnects = <&aggre1_noc MASTER_EMMC 0 &aggre1_noc SLAVE_A1NOC_SNOC 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_EMMC_CFG 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + operating-points-v2 = <&sdhc1_opp_table>; iommus = <&apps_smmu 0x140 0xf>; @@ -442,6 +447,38 @@ non-removable; status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-20000000 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_min_svs>; + opp-peak-kBps = <80000 80000>; + opp-avg-kBps = <52286 80000>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <200000 100000>; + opp-avg-kBps = <130718 100000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <200000 130000>; + opp-avg-kBps = <130718 130000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <4096000 4096000>; + opp-avg-kBps = <1338562 1338562>; + }; + }; }; gpi_dma0: dma-controller@800000 { @@ -477,6 +514,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c0: i2c@880000 { @@ -490,6 +529,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -507,6 +550,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -524,6 +571,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -541,6 +592,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -558,6 +613,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -575,6 +634,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -592,6 +655,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -609,6 +676,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -649,6 +720,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c8: i2c@a80000 { @@ -662,6 +735,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -679,6 +756,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -696,6 +777,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -713,6 +798,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -730,6 +819,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -747,6 +840,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -764,6 +861,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, <&gpi_dma1 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -781,6 +882,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, <&gpi_dma1 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1028,6 +1133,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre2_noc MASTER_USB3 0 &mem_noc SLAVE_EBI_CH0 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + status = "disabled"; usb_1_dwc3: usb@a600000 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index f2b48241d15c..59ad6a8403d2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -135,11 +135,9 @@ backlight = <&backlight>; no-hpd; - ports { - panel_in: port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index d4866feef2c4..e14fe9bbb386 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -819,7 +819,6 @@ &spi2 { /* On Low speed expansion */ - label = "LS-SPI0"; status = "okay"; }; @@ -1136,10 +1135,6 @@ bias-disable; }; -&pm8998_gpios { - -}; - /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi0_default { drive-strength = <6>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 64638ea94db7..0c268c560d37 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -29,6 +29,23 @@ stdout-path = "serial0:115200n8"; }; + gpio-hall-sensor { + compatible = "gpio-keys"; + label = "Hall effect sensor"; + + pinctrl-0 = <&hall_sensor_default>; + pinctrl-names = "default"; + + event-hall-sensor { + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + label = "Hall Effect Sensor"; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + gpio-keys { compatible = "gpio-keys"; label = "Volume keys"; @@ -330,8 +347,6 @@ display_panel: panel@0 { status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; vddio-supply = <&vreg_l14a_1p88>; @@ -753,6 +768,14 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; + hall_sensor_default: hall-sensor-default-state { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + tri_state_key_default: tri-state-key-default-state { pins = "gpio40", "gpio42", "gpio26"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 086d14e2de92..d82c0d4407f0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -45,7 +45,6 @@ "AMIC3", "MIC BIAS4", "AMIC4", "MIC BIAS1", "AMIC5", "MIC BIAS3"; - }; /* diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index e0fda4d754fe..e444ef1cd742 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -232,9 +232,6 @@ vddpos-supply = <&lab>; vddneg-supply = <&ibb>; - #address-cells = <1>; - #size-cells = <0>; - backlight = <&pmi8998_wled>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts index 8e176111e599..e9427851ebaa 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts @@ -10,6 +10,6 @@ }; &display_panel { - compatible = "tianma,fhd-video"; + compatible = "tianma,fhd-video", "novatek,nt36672a"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 479859bd8ab3..2f32179c7d1b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -92,9 +92,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -118,9 +119,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -140,9 +142,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -162,9 +165,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -184,6 +188,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -206,6 +211,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -228,6 +234,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -250,6 +257,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -2192,8 +2200,11 @@ llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; - reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>, + <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>, + <0 0x01300000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -2292,8 +2303,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -2397,7 +2408,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; @@ -2617,7 +2628,7 @@ }; cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.0"; + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0 0x01dc4000 0 0x24000>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rpmhcc RPMH_CE_CLK>; @@ -4924,7 +4935,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sram@146bf000 { @@ -5222,7 +5232,7 @@ }; cpufreq_hw: cpufreq@17d43000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; @@ -5232,6 +5242,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; wifi: wifi@18800000 { diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index a3f1c7c41fd7..a1f0622db5a0 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -202,12 +202,22 @@ vqmmc-supply = <&vreg_l5a>; cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>; status = "okay"; }; &tlmm { gpio-reserved-ranges = <14 4>; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &ufs_mem_hc { @@ -225,11 +235,16 @@ status = "okay"; }; -&usb_1 { +&usb { status = "okay"; }; -&usb_1_hsphy { +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { vdd-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l12a>; vdda-phy-dpdm-supply = <&vreg_l15a>; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index fbd67d2c8d78..2a51c938bbcb 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -39,6 +39,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -54,6 +55,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -65,6 +67,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -76,6 +79,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -87,6 +91,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; @@ -102,6 +107,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x101>; + clocks = <&cpufreq_hw 1>; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; enable-method = "psci"; @@ -113,6 +119,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x102>; + clocks = <&cpufreq_hw 1>; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; enable-method = "psci"; @@ -124,6 +131,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x103>; + clocks = <&cpufreq_hw 1>; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; enable-method = "psci"; @@ -595,13 +603,6 @@ bias-pull-up; drive-strength = <10>; }; - - sd-cd-pins { - pins = "gpio88"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; }; sdc2_state_off: sdc2-off-state { @@ -622,13 +623,6 @@ bias-pull-up; drive-strength = <2>; }; - - sd-cd-pins { - pins = "gpio88"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - }; }; }; @@ -642,7 +636,7 @@ #power-domain-cells = <1>; }; - usb_1_hsphy: phy@1613000 { + usb_hsphy: phy@1613000 { compatible = "qcom,sm6115-qusb2-phy"; reg = <0x0 0x01613000 0x0 0x180>; #phy-cells = <0>; @@ -731,10 +725,6 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; - pinctrl-0 = <&sdc1_state_on>; - pinctrl-1 = <&sdc1_state_off>; - pinctrl-names = "default", "sleep"; - bus-width = <8>; status = "disabled"; }; @@ -753,10 +743,6 @@ <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; - pinctrl-0 = <&sdc2_state_on>; - pinctrl-1 = <&sdc2_state_off>; - pinctrl-names = "default", "sleep"; - power-domains = <&rpmpd SM6115_VDDCX>; operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0x00a0 0x0>; @@ -1082,7 +1068,7 @@ }; }; - usb_1: usb@4ef8800 { + usb: usb@4ef8800 { compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; reg = <0x0 0x04ef8800 0x0 0x400>; #address-cells = <2>; @@ -1110,11 +1096,11 @@ qcom,select-utmi-as-pipe-clk; status = "disabled"; - usb_1_dwc3: usb@4e00000 { + usb_dwc3: usb@4e00000 { compatible = "snps,dwc3"; reg = <0x0 0x04e00000 0x0 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_1_hsphy>; + phys = <&usb_hsphy>; phy-names = "usb2-phy"; iommus = <&apps_smmu 0x120 0x0>; snps,dis_u2_susphy_quirk; @@ -1122,8 +1108,6 @@ snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; - maximum-speed = "high-speed"; - dr_mode = "peripheral"; }; }; @@ -1323,6 +1307,39 @@ #power-domain-cells = <1>; }; + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + stm@8002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x0 0x08002000 0x0 0x1000>, @@ -1935,6 +1952,157 @@ }; }; + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDD_LPI_CX>, + <&rpmpd SM6115_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x01c3 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x01c4 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x01c5 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x01c6 0x0>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x01c7 0x0>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@b300000 { + compatible = "qcom,sm6115-cdsp-pas"; + reg = <0x0 0x0b300000 0x0 0x100000>; + + interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + + memory-region = <&pil_cdsp_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 28>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0c01 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0c02 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0c03 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x0c04 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x0c05 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x0c06 0x0>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x0c600000 0x0 0x80000>; @@ -2115,7 +2283,7 @@ }; cpufreq_hw: cpufreq@f521000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm6115-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0x0 0x0f521000 0x0 0x1000>, <0x0 0x0f523000 0x0 0x1000>; @@ -2124,6 +2292,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index 4ce2d905d70e..10c9d338446c 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -49,7 +49,7 @@ gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; }; @@ -273,11 +273,16 @@ status = "okay"; }; -&usb_1 { +&usb { status = "okay"; }; -&usb_1_hsphy { +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { vdd-supply = <&pm6125_l4>; vdda-pll-supply = <&pm6125_l12>; vdda-phy-dpdm-supply = <&pm6125_l15>; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 65033227718a..fd577eb705f8 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -1134,7 +1134,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; apps_smmu: iommu@c600000 { diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 4916d0db5b47..2a3ad478892b 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -233,7 +233,6 @@ regulator-allow-set-load; regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; - }; pm6150l_l7: ldo7 { @@ -255,7 +254,6 @@ regulator-allow-set-load; regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; - }; pm6150l_l10: ldo10 { diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 1e1d366c92c1..18c4616848ce 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -46,6 +46,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -71,6 +72,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -92,6 +94,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -113,6 +116,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -134,6 +138,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -155,6 +160,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -170,13 +176,13 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1894>; dynamic-power-coefficient = <703>; @@ -198,6 +204,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1894>; dynamic-power-coefficient = <703>; @@ -880,7 +887,6 @@ interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; - }; config_noc: interconnect@1500000 { @@ -1348,7 +1354,7 @@ system-cache-controller@9200000 { compatible = "qcom,sm6350-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg-names = "llcc0_base", "llcc_broadcast_base"; }; gem_noc: interconnect@9680000 { @@ -1995,13 +2001,14 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm6350-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>; reg-names = "freq-domain0", "freq-domain1"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 068ee4f72485..86d733ca9b4f 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,sm6375-gcc.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -39,6 +40,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -58,6 +60,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -74,6 +77,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -90,6 +94,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -106,6 +111,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -122,6 +128,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -132,13 +139,13 @@ compatible = "cache"; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -155,6 +162,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -424,6 +432,15 @@ no-map; }; + rmtfs_mem: rmtfs@f3900000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf3900000 0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; + debug_mem: debug@ffb00000 { reg = <0 0xffb00000 0 0xc0000>; no-map; @@ -1384,6 +1401,7 @@ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index ff77cc3c879a..47e2430991ca 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -59,7 +59,7 @@ gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; key-camera-snapshot { @@ -68,7 +68,7 @@ gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; key-vol-down { @@ -77,7 +77,7 @@ gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 13e0ce828606..9491be4a6bf0 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -48,6 +48,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -74,6 +75,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -90,13 +92,13 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU2: cpu@200 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -119,6 +121,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -141,6 +144,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -163,6 +167,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -185,6 +190,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -207,6 +213,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <421>; @@ -1334,6 +1341,20 @@ status = "disabled"; }; + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a84000 0x0 0x4000>; + reg-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart9_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c10: i2c@a88000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a88000 0 0x4000>; @@ -1772,8 +1793,11 @@ system-cache-controller@9200000 { compatible = "qcom,sm8150-llcc"; - reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, + <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, + <0 0x09600000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -1799,8 +1823,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1895,7 +1919,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; @@ -2249,7 +2273,8 @@ }; adreno_smmu: iommu@2ca0000 { - compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x02ca0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <1>; @@ -2425,6 +2450,13 @@ bias-disable; }; + qup_uart9_default: qup-uart9-default-state { + pins = "gpio41", "gpio42"; + function = "qup9"; + drive-strength = <2>; + bias-disable; + }; + qup_i2c10_default: qup-i2c10-default-state { pins = "gpio9", "gpio10"; function = "qup10"; @@ -3935,7 +3967,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; apps_smmu: iommu@15000000 { @@ -4263,7 +4294,7 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>, <0 0x18327800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1", @@ -4273,6 +4304,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; lmh_cluster1: lmh@18350800 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index 5ecf7dafb2ec..01fe3974ee72 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -26,7 +26,7 @@ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index b9c982a059df..c96cc9c90a5f 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -63,7 +63,7 @@ gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts index a85d47f7a9e8..fe7972347609 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts @@ -95,7 +95,7 @@ linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; @@ -595,7 +595,7 @@ &usb_1_dwc3 { dr_mode = "peripheral"; - maximum-spped = "high-speed"; + maximum-speed = "high-speed"; /* Remove USB3 phy */ phys = <&usb_1_hsphy>; phy-names = "usb2-phy"; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 2f0e460acccd..7b78761f2041 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -97,6 +97,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -127,6 +128,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -151,6 +153,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -175,6 +178,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -199,6 +203,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -223,6 +228,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -241,13 +247,13 @@ cache-unified; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -272,6 +278,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <444>; @@ -1834,8 +1841,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -1943,7 +1950,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; @@ -2051,7 +2058,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>, <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; @@ -2420,7 +2427,6 @@ drive-strength = <2>; slew-rate = <1>; bias-bus-hold; - }; }; @@ -2439,7 +2445,6 @@ drive-strength = <2>; input-enable; bias-pull-down; - }; }; @@ -2656,7 +2661,8 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2763,6 +2769,73 @@ }; }; + tpda@6004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0 0x06004000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tpda_out_funnel_qatb: endpoint { + remote-endpoint = <&funnel_qatb_in_tpda>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@9 { + reg = <9>; + tpda_9_in_tpdm_mm: endpoint { + remote-endpoint = <&tpdm_mm_out_tpda9>; + }; + }; + + port@17 { + reg = <23>; + tpda_23_in_tpdm_prng: endpoint { + remote-endpoint = <&tpdm_prng_out_tpda_23>; + }; + }; + }; + }; + + funnel@6005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06005000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_qatb_out_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_in_funnel_qatb>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_qatb_in_tpda: endpoint { + remote-endpoint = <&tpda_out_funnel_qatb>; + }; + }; + }; + }; + funnel@6041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06041000 0 0x1000>; @@ -2782,6 +2855,13 @@ #address-cells = <1>; #size-cells = <0>; + port@6 { + reg = <6>; + funnel_in0_in_funnel_qatb: endpoint { + remote-endpoint = <&funnel_qatb_out_funnel_in0>; + }; + }; + port@7 { reg = <7>; funnel0_in7: endpoint { @@ -2799,11 +2879,7 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + port { funnel_in1_out_funnel_merg: endpoint { remote-endpoint = <&funnel_merg_in_funnel_in1>; }; @@ -2899,12 +2975,27 @@ }; }; + tpdm@684c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0 0x0684c000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_prng_out_tpda_23: endpoint { + remote-endpoint = <&tpda_23_in_tpdm_prng>; + }; + }; + }; + }; + funnel@6b04000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; arm,primecell-periphid = <0x000bb908>; reg = <0 0x06b04000 0 0x1000>; - reg-names = "funnel-base"; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -2928,7 +3019,6 @@ }; }; }; - }; etf@6b05000 { @@ -2983,6 +3073,80 @@ }; }; + tpdm@6c08000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0 0x06c08000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_mm_out_funnel_dl_mm: endpoint { + remote-endpoint = <&funnel_dl_mm_in_tpdm_mm>; + }; + }; + }; + }; + + funnel@6c0b000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06c0b000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_dl_mm_out_funnel_dl_center: endpoint { + remote-endpoint = <&funnel_dl_center_in_funnel_dl_mm>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + funnel_dl_mm_in_tpdm_mm: endpoint { + remote-endpoint = <&tpdm_mm_out_funnel_dl_mm>; + }; + }; + }; + }; + + funnel@6c2d000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06c2d000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + port { + tpdm_mm_out_tpda9: endpoint { + remote-endpoint = <&tpda_9_in_tpdm_mm>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + funnel_dl_center_in_funnel_dl_mm: endpoint { + remote-endpoint = <&funnel_dl_mm_out_funnel_dl_center>; + }; + }; + }; + }; + etm@7040000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07040000 0 0x1000>; @@ -3220,9 +3384,6 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; - port { funnel_apss_merg_out_funnel_in1: endpoint { remote-endpoint = <&funnel_in1_in_funnel_apss_merg>; @@ -3559,8 +3720,11 @@ system-cache-controller@9200000 { compatible = "qcom,sm8250-llcc"; - reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, + <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, + <0 0x09600000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; }; usb_2: usb@a8f8800 { @@ -5481,6 +5645,7 @@ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 09baf6959c71..2ee1b121686a 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -31,6 +31,40 @@ }; }; + pmic-glink { + compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -644,7 +678,6 @@ bias-pull-up; }; }; - }; &uart2 { @@ -674,8 +707,16 @@ }; &usb_1_dwc3 { - /* TODO: Define USB-C connector properly */ - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts index b536ae36ae6d..3bd5e57cbcda 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts @@ -341,6 +341,9 @@ &usb_1 { status = "okay"; +}; + +&usb_1_dwc3 { dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 1a5a612d4234..7fbc288eca58 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> @@ -49,6 +50,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -70,6 +72,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -87,6 +90,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -104,6 +108,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -121,6 +126,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -138,6 +144,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -149,13 +156,13 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -173,6 +180,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; @@ -653,7 +661,7 @@ <&ufs_mem_phy_lanes 0>, <&ufs_mem_phy_lanes 1>, <&ufs_mem_phy_lanes 2>, - <0>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>; }; @@ -1487,8 +1495,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -1581,8 +1589,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1908,7 +1916,8 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x20000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2126,37 +2135,24 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8350-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8350-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; }; usb_2_qmpphy: phy-wrapper@88eb000 { @@ -2205,8 +2201,11 @@ system-cache-controller@9200000 { compatible = "qcom,sm8350-llcc"; - reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; }; compute_noc: interconnect@a0c0000 { @@ -2259,8 +2258,27 @@ iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -2418,6 +2436,85 @@ remote-endpoint = <&mdss_dsi1_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp_in>; + }; + }; + }; + }; + + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; }; }; @@ -2624,8 +2721,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, - <0>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", @@ -3241,6 +3338,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; cdsp: remoteproc@98900000 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index feef3837e4cd..e931545a2cac 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -25,7 +25,7 @@ }; wcd938x: audio-codec { - compatible = "qcom,wcd9380-codec"; + compatible = "qcom,wcd9385-codec"; pinctrl-names = "default"; pinctrl-0 = <&wcd_default>; @@ -87,6 +87,40 @@ enable-active-high; }; + pmic-glink { + compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -343,7 +377,6 @@ regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - }; regulators-3 { @@ -724,7 +757,16 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { @@ -755,7 +797,7 @@ spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio1"; function = "gpio"; - drive-strength = <4>; + drive-strength = <16>; bias-disable; output-low; }; @@ -763,14 +805,16 @@ spkr_2_sd_n_active: spkr-2-sd-n-active-state { pins = "gpio89"; function = "gpio"; - drive-strength = <4>; + drive-strength = <16>; bias-disable; output-low; }; - wcd_default: wcd-default-state { + wcd_default: wcd-reset-n-active-state { pins = "gpio43"; function = "gpio"; + drive-strength = <16>; bias-disable; + output-low; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index f7592946c783..65a94dfaf5ae 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -282,7 +282,6 @@ regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - }; regulators-3 { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index b285b1530c10..31877f18dce2 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/interconnect/qcom,sm8450.h> #include <dt-bindings/soc/qcom,gpr.h> @@ -154,7 +155,6 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { @@ -748,7 +748,7 @@ <&ufs_mem_phy_lanes 0>, <&ufs_mem_phy_lanes 1>, <&ufs_mem_phy_lanes 2>, - <0>; + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "sleep_clk", "pcie_0_pipe_clk", @@ -1746,8 +1746,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; /* * MSIs for BDF (1:0.0) only works with Device ID 0x5980. @@ -1798,7 +1798,6 @@ reset-names = "pci"; power-domains = <&gcc PCIE_0_GDSC>; - power-domain-names = "gdsc"; phys = <&pcie0_lane>; phy-names = "pciephy"; @@ -1862,8 +1861,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; /* * MSIs for BDF (1:0.0) only works with Device ID 0x5a00. @@ -1912,13 +1911,12 @@ reset-names = "pci"; power-domains = <&gcc PCIE_1_GDSC>; - power-domain-names = "gdsc"; phys = <&pcie1_lane>; phy-names = "pciephy"; - perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; @@ -2034,37 +2032,24 @@ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8450-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sm8450-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; }; remoteproc_slpi: remoteproc@2400000 { @@ -2763,6 +2748,12 @@ }; }; + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -2795,6 +2786,78 @@ }; }; + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sm8450-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -2972,8 +3035,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, /* dp0 */ - <0>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <0>, /* dp1 */ <0>, <0>, /* dp2 */ @@ -3569,7 +3632,6 @@ pins = "gpio76", "gpio77", "gpio78", "gpio79"; function = "qup20"; }; - }; lpass_tlmm: pinctrl@3440000 { @@ -3689,6 +3751,20 @@ }; }; + sram@146aa000 { + compatible = "qcom,sm8450-imem", "syscon", "simple-mfd"; + reg = <0 0x146aa000 0 0x1000>; + ranges = <0 0 0x146aa000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -3981,8 +4057,11 @@ system-cache-controller@19200000 { compatible = "qcom,sm8450-llcc"; - reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>, + <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>, + <0 0x19a00000 0 0x80000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; @@ -4154,8 +4233,27 @@ iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 5db6e789e6b8..e2b9bb6b1e27 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -27,6 +27,40 @@ stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -414,18 +448,27 @@ &pcie0 { wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + status = "okay"; }; &pcie0_phy { vdda-phy-supply = <&vreg_l1e_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; }; &pcie1 { wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + status = "okay"; }; @@ -433,6 +476,7 @@ vdda-phy-supply = <&vreg_l3c_0p91>; vdda-pll-supply = <&vreg_l3e_1p2>; vdda-qref-supply = <&vreg_l1e_0p88>; + status = "okay"; }; @@ -447,6 +491,11 @@ }; }; +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -546,13 +595,24 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&pm8550b_eusb2_repeater>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts new file mode 100644 index 000000000000..d5a645ee2a61 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -0,0 +1,439 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8550 QRD"; + compatible = "qcom,sm8550-qrd", "qcom,sm8550"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p25>; + vdd-l12-supply = <&vreg_s6g_1p86>; + vdd-l15-supply = <&vreg_s6g_1p86>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* ldo2 supplies SM8550 VDD_LPI_MX */ + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s4e_0p95: smps4 { + regulator-name = "vreg_s4e_0p95"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p08: smps5 { + regulator-name = "vreg_s5e_1p08"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p88: ldo3 { + regulator-name = "vreg_l3f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vreg_s1g_1p25: smps1 { + regulator-name = "vreg_s1g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p85: smps2 { + regulator-name = "vreg_s2g_0p85"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p8: smps3 { + regulator-name = "vreg_s3g_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p25: smps4 { + regulator-name = "vreg_s4g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p85: smps5 { + regulator-name = "vreg_s5g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p86: smps6 { + regulator-name = "vreg_s6g_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mbn", + "qcom/sm8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mbn", + "qcom/sm8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mbn", + "qcom/sm8550/modem_dtb.mbn"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vccq2-supply = <&vreg_l3g_1p2>; + vccq2-max-microamp = <100>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p88>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 5d0888398b3c..ed2554be467f 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -68,6 +68,7 @@ device_type = "cpu"; compatible = "arm,cortex-a510"; reg = <0 0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; power-domains = <&CPU_PD0>; @@ -91,6 +92,7 @@ device_type = "cpu"; compatible = "arm,cortex-a510"; reg = <0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; power-domains = <&CPU_PD1>; @@ -110,6 +112,7 @@ device_type = "cpu"; compatible = "arm,cortex-a510"; reg = <0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; power-domains = <&CPU_PD2>; @@ -129,6 +132,7 @@ device_type = "cpu"; compatible = "arm,cortex-a715"; reg = <0 0x300>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_300>; power-domains = <&CPU_PD3>; @@ -148,6 +152,7 @@ device_type = "cpu"; compatible = "arm,cortex-a715"; reg = <0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_400>; power-domains = <&CPU_PD4>; @@ -167,6 +172,7 @@ device_type = "cpu"; compatible = "arm,cortex-a710"; reg = <0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_500>; power-domains = <&CPU_PD5>; @@ -186,6 +192,7 @@ device_type = "cpu"; compatible = "arm,cortex-a710"; reg = <0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; power-domains = <&CPU_PD6>; @@ -205,6 +212,7 @@ device_type = "cpu"; compatible = "arm,cortex-x3"; reg = <0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; next-level-cache = <&L2_700>; power-domains = <&CPU_PD7>; @@ -412,7 +420,6 @@ no-map; }; - hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 { reg = <0 0x811d0000 0 0x30000>; no-map; @@ -1653,8 +1660,8 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; bus-range = <0x00 0xff>; dma-coherent; @@ -1672,25 +1679,24 @@ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>; - clock-names = "pipe", - "aux", + clock-names = "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", "ddrss_sf_tbu", - "aggre0"; + "noc_aggr"; - interconnect-names = "pcie-mem"; - interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>; + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; iommus = <&apps_smmu 0x1400 0x7f>; iommu-map = <0x0 &apps_smmu 0x1400 0x1>, @@ -1704,12 +1710,6 @@ phys = <&pcie0_phy>; phy-names = "pciephy"; - perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_default_state>; - status = "disabled"; }; @@ -1752,8 +1752,8 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; bus-range = <0x00 0xff>; dma-coherent; @@ -1771,8 +1771,7 @@ <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_AUX_CLK>, + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>, @@ -1780,21 +1779,21 @@ <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; - clock-names = "pipe", - "aux", + clock-names = "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", "ddrss_sf_tbu", - "aggre1", - "cnoc_pcie_sf_axi"; + "noc_aggr", + "cnoc_sf_axi"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - interconnect-names = "pcie-mem"; - interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>; + interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; iommus = <&apps_smmu 0x1480 0x7f>; iommu-map = <0x0 &apps_smmu 0x1480 0x1>, @@ -1802,20 +1801,13 @@ resets = <&gcc GCC_PCIE_1_BCR>, <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; - reset-names = "pci", - "pcie_1_link_down_reset"; + reset-names = "pci", "link_down"; power-domains = <&gcc PCIE_1_GDSC>; phys = <&pcie1_phy>; phy-names = "pciephy"; - perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; - enable-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_state>; - status = "disabled"; }; @@ -1823,18 +1815,17 @@ compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy"; reg = <0x0 0x01c0e000 0x0 0x2000>; - clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&tcsr TCSR_PCIE_1_CLKREF_EN>, <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, - <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_PHY_AUX_CLK>; + <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "aux", "cfg_ahb", "ref", "rchng", - "pipe", "aux_phy"; + "pipe"; resets = <&gcc GCC_PCIE_1_PHY_BCR>, <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; - reset-names = "phy", "nocsr"; + reset-names = "phy", "phy_nocsr"; assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; assigned-clock-rates = <100000000>; @@ -2211,7 +2202,8 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; operating-points-v2 = <&mdss_dsi_opp_table>; @@ -2303,8 +2295,10 @@ power-domains = <&rpmhpd SM8550_MMCX>; - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; operating-points-v2 = <&mdss_dsi_opp_table>; @@ -2468,6 +2462,25 @@ phys = <&usb_1_hsphy>, <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -2808,10 +2821,10 @@ }; qup_spi0_cs: qup-spi0-cs-state { - cs-pins { - pins = "gpio31"; - function = "qup1_se0"; - }; + pins = "gpio31"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; }; qup_spi0_data_clk: qup-spi0-data-clk-state { @@ -3172,7 +3185,7 @@ intc: interrupt-controller@17100000 { compatible = "arm,gic-v3"; - reg = <0 0x17100000 0 0x10000>, /* GICD */ + reg = <0 0x17100000 0 0x10000>, /* GICD */ <0 0x17180000 0 0x200000>; /* GICR * 8 */ ranges; #interrupt-cells = <3>; @@ -3340,6 +3353,7 @@ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; pmu@24091000 { |