diff options
Diffstat (limited to 'arch')
1150 files changed, 47169 insertions, 13091 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 780d4673c3ca..a5c2b1aa46b0 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -27,6 +27,7 @@ config ALPHA select AUDIT_ARCH select GENERIC_CPU_VULNERABILITIES select GENERIC_SMP_IDLE_THREAD + select HAS_IOPORT select HAVE_ARCH_AUDITSYSCALL select HAVE_MOD_ARCH_SPECIFIC select MODULES_USE_ELF_RELA diff --git a/arch/alpha/lib/fpreg.c b/arch/alpha/lib/fpreg.c index 612c5eca71bc..7c08b225261c 100644 --- a/arch/alpha/lib/fpreg.c +++ b/arch/alpha/lib/fpreg.c @@ -23,7 +23,7 @@ alpha_read_fp_reg (unsigned long reg) if (unlikely(reg >= 32)) return 0; - preempt_enable(); + preempt_disable(); if (current_thread_info()->status & TS_SAVED_FP) val = current_thread_info()->fp[reg]; else switch (reg) { @@ -133,7 +133,7 @@ alpha_read_fp_reg_s (unsigned long reg) if (unlikely(reg >= 32)) return 0; - preempt_enable(); + preempt_disable(); if (current_thread_info()->status & TS_SAVED_FP) { LDT(0, current_thread_info()->fp[reg]); STS(0, val); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e24a9820e12f..a8b82c2f333b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -24,7 +24,6 @@ config ARM select ARCH_HAS_SYNC_DMA_FOR_CPU select ARCH_HAS_TEARDOWN_DMA_OPS if MMU select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST - select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_KEEP_MEMBLOCK @@ -70,6 +69,7 @@ config ARM select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD select HARDIRQS_SW_RESEND + select HAS_IOPORT select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU @@ -497,8 +497,6 @@ source "arch/arm/mach-omap2/Kconfig" source "arch/arm/mach-orion5x/Kconfig" -source "arch/arm/mach-oxnas/Kconfig" - source "arch/arm/mach-pxa/Kconfig" source "arch/arm/mach-qcom/Kconfig" @@ -986,7 +984,7 @@ config SMP uniprocessor machines. On a uniprocessor machine, the kernel will run faster if you say N here. - See also <file:Documentation/x86/i386/IO-APIC.rst>, + See also <file:Documentation/arch/x86/i386/IO-APIC.rst>, <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at <http://tldp.org/HOWTO/SMP-HOWTO.html>. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 485a439e22ca..547e5856eaa0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -203,7 +203,6 @@ machine-$(CONFIG_ARCH_MSTARV7) += mstar machine-$(CONFIG_ARCH_NOMADIK) += nomadik machine-$(CONFIG_ARCH_NPCM) += npcm machine-$(CONFIG_ARCH_NSPIRE) += nspire -machine-$(CONFIG_ARCH_OXNAS) += oxnas machine-$(CONFIG_ARCH_OMAP1) += omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 2ef651a78fa2..726ecabcef09 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -107,7 +107,7 @@ ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. -KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \ +KBSS_SZ = $(shell echo $$(($$($(NM) vmlinux | \ sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \ -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) ) LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index efe4152e5846..59829fc90315 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -561,7 +561,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-wandboard-revd1.dtb \ imx6dl-yapp4-draco.dtb \ imx6dl-yapp4-hydra.dtb \ + imx6dl-yapp4-lynx.dtb \ imx6dl-yapp4-orion.dtb \ + imx6dl-yapp4-phoenix.dtb \ imx6dl-yapp4-ursa.dtb \ imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ @@ -668,6 +670,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard-revb1.dtb \ imx6q-wandboard-revd1.dtb \ imx6q-yapp4-crux.dtb \ + imx6q-yapp4-pegasus.dtb \ imx6q-zii-rdu2.dtb \ imx6qp-mba6b.dtb \ imx6qp-nitrogen6_max.dtb \ @@ -683,6 +686,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-vicutp.dtb \ imx6qp-wandboard-revd1.dtb \ imx6qp-yapp4-crux-plus.dtb \ + imx6qp-yapp4-pegasus-plus.dtb \ imx6qp-zii-rdu2.dtb \ imx6s-dhcom-drc02.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ @@ -690,6 +694,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-kobo-aura2.dtb \ imx6sl-tolino-shine2hd.dtb \ imx6sl-tolino-shine3.dtb \ + imx6sl-tolino-vision.dtb \ imx6sl-tolino-vision5.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ @@ -755,6 +760,10 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ imx6ull-phytec-tauri-emmc.dtb \ imx6ull-phytec-tauri-nand.dtb \ + imx6ull-tarragon-master.dtb \ + imx6ull-tarragon-micro.dtb \ + imx6ull-tarragon-slave.dtb \ + imx6ull-tarragon-slavext.dtb \ imx6ull-tqma6ull2-mba6ulx.dtb \ imx6ull-tqma6ull2l-mba6ulx.dtb \ imx6ulz-14x14-evk.dtb \ @@ -994,16 +1003,24 @@ dtb-$(CONFIG_SOC_OMAP5) += \ omap5-igep0050.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb +am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo +am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ am57xx-beagle-x15-revc.dtb \ + am57xx-evm.dtb \ + am57xx-evm-reva3.dtb \ am5729-beagleboneai.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ + am572x-idk-touchscreen.dtbo \ am571x-idk.dtb \ + am571x-idk-touchscreen.dtbo \ am574x-idk.dtb \ + am57xx-idk-lcd-osd101t2045.dtbo \ + am57xx-idk-lcd-osd101t2587.dtbo \ dra7-evm.dtb \ dra72-evm.dtb \ dra72-evm-revc.dtb \ @@ -1033,9 +1050,6 @@ dtb-$(CONFIG_ARCH_PXA) += \ pxa300-raumfeld-speaker-m.dtb \ pxa300-raumfeld-speaker-one.dtb \ pxa300-raumfeld-speaker-s.dtb -dtb-$(CONFIG_ARCH_OXNAS) += \ - ox810se-wd-mbwe.dtb \ - ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ @@ -1397,6 +1411,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-s3-elimo-initium.dtb \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ + sun8i-t113s-mangopi-mq-r-t113.dtb \ sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3-sl631-imx179.dtb \ sun8i-v3s-licheepi-zero.dtb \ @@ -1406,7 +1421,9 @@ dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb dtb-$(CONFIG_MACH_SUNIV) += \ - suniv-f1c100s-licheepi-nano.dtb + suniv-f1c100s-licheepi-nano.dtb \ + suniv-f1c200s-lctech-pi.dtb \ + suniv-f1c200s-popstick-v1.1.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ tegra20-asus-tf101.dtb \ diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 947497413977..67c7fcc52ce6 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -29,25 +29,23 @@ }; /* User IO */ - user_leds: user_leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; user-led0 { gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; default-state = "on"; }; user-led1 { gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - linux,default-trigger = "gpio"; default-state = "on"; }; }; - user_buttons: user_buttons { + user_buttons: user-buttons { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&user_buttons_pins>; @@ -70,14 +68,14 @@ }; &am33xx_pinmux { - user_buttons_pins: pinmux_user_buttons { + user_buttons_pins: pinmux-user-buttons { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */ >; }; - user_leds_pins: pinmux_user_leds { + user_leds_pins: pinmux-user-leds { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */ @@ -87,7 +85,7 @@ /* CAN */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ @@ -144,7 +142,7 @@ pinctrl-names = "default"; pinctrl-0 = <&cb_gpio_pins>; - cb_gpio_pins: pinmux_cb_gpio { + cb_gpio_pins: pinmux-cb-gpio { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ @@ -154,7 +152,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: pinmux-mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -178,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1 { + uart1_pins: pinmux-uart1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -194,14 +192,14 @@ >; }; - uart2_pins: pinmux_uart2 { + uart2_pins: pinmux-uart2 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ >; }; - uart3_pins: pinmux_uart3 { + uart3_pins: pinmux-uart3 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */ diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index e2cec1ffaa4c..034dc5181679 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -14,6 +14,7 @@ aliases { rtc0 = &i2c_rtc; rtc1 = &rtc; + rtc2 = &tps; }; cpus { @@ -48,7 +49,7 @@ /* EMMC */ &am33xx_pinmux { - emmc_pins: pinmux_emmc_pins { + emmc_pins: pinmux-emmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ @@ -124,7 +125,7 @@ /* I2C Busses */ &am33xx_pinmux { - i2c0_pins: pinmux_i2c0 { + i2c0_pins: pinmux-i2c0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) @@ -164,7 +165,7 @@ /* NAND memory */ &am33xx_pinmux { - nandflash_pins: pinmux_nandflash { + nandflash_pins: pinmux-nandflash { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) @@ -202,7 +203,6 @@ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; @@ -316,7 +316,7 @@ /* SPI Busses */ &am33xx_pinmux { - spi0_pins: pinmux_spi0 { + spi0_pins: pinmux-spi0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi index 7b3966ee51b9..3894f14a914c 100644 --- a/arch/arm/boot/dts/am335x-regor.dtsi +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -18,7 +18,7 @@ }; /* User IO */ - user_leds: user_leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; @@ -39,7 +39,7 @@ /* User Leds */ &am33xx_pinmux { - user_leds_pins: pinmux_user_leds { + user_leds_pins: pinmux-user-leds { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */ @@ -49,7 +49,7 @@ /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -65,7 +65,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: pinmux-ethernet1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -108,7 +108,7 @@ pinctrl-names = "default"; pinctrl-0 = <&user_gpios_pins>; - user_gpios_pins: pinmux_user_gpios { + user_gpios_pins: pinmux-user-gpios { pinctrl-single,pins = < /* DIGIN 1-4 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */ @@ -126,7 +126,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { + mmc1_pins: pinmux-mmc1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -155,14 +155,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart2_pins: pinmux_uart2 { + uart2_pins: pinmux-uart2 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ @@ -184,7 +184,7 @@ /* RS485 - UART1 */ &am33xx_pinmux { - uart1_rs485_pins: pinmux_uart1_rs485_pins { + uart1_rs485_pins: pinmux-uart1-rs485-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index f957fea8208e..6a103f17585b 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -8,8 +8,34 @@ model = "Phytec AM335x phyBOARD-WEGA"; compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; - sound: sound_iface { - compatible = "ti,da830-evm-audio"; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "snd-wega"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_iface_main>; + simple-audio-card,frame-master = <&sound_iface_main>; + simple-audio-card,mclk-fs = <32>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + }; + + sound_iface_main: simple-audio-card,codec { + sound-dai = <&tlv320aic3007>; + clocks = <&mcasp0_fck>; + }; + }; vcc3v3: fixedregulator1 { @@ -23,7 +49,7 @@ /* Audio */ &am33xx_pinmux { - mcasp0_pins: pinmux_mcasp0 { + mcasp0_pins: pinmux-mcasp0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) @@ -36,6 +62,7 @@ &i2c0 { tlv320aic3007: tlv320aic3007@18 { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3007"; reg = <0x18>; AVDD-supply = <&vcc3v3>; @@ -47,6 +74,7 @@ }; &mcasp0 { + #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcasp0_pins>; op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ @@ -59,23 +87,10 @@ status = "okay"; }; -&sound { - ti,model = "AM335x-Wega"; - ti,audio-codec = <&tlv320aic3007>; - ti,mcasp-controller = <&mcasp0>; - ti,audio-routing = - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "LINE1L", "Line In", - "LINE1R", "Line In"; - clocks = <&mcasp0_fck>; - clock-names = "mclk"; - status = "okay"; -}; /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -91,7 +106,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: pinmux-ethernet1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -131,7 +146,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { + mmc1_pins: pinmux-mmc1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -161,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: pinmux-uart1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am571x-idk-touchscreen.dtso b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso new file mode 100644 index 000000000000..c051ee6c1130 --- /dev/null +++ b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: edt-ft5506@38 { + compatible = "edt,edt-ft5506", "edt,edt-ft5x06"; + + reg = <0x38>; + + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + /* GPIO line is inverted before going to touch panel */ + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1920>; + touchscreen-size-y = <1200>; + + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk-touchscreen.dtso b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso new file mode 100644 index 000000000000..573e932b1239 --- /dev/null +++ b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: edt-ft5506@38 { + compatible = "edt,edt-ft5506", "edt,edt-ft5x06"; + + reg = <0x38>; + + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + /* GPIO line is inverted before going to touch panel */ + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1920>; + touchscreen-size-y = <1200>; + + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-evm.dtso b/arch/arm/boot/dts/am57xx-evm.dtso new file mode 100644 index 000000000000..12385a31061e --- /dev/null +++ b/arch/arm/boot/dts/am57xx-evm.dtso @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DT overlay for AM57xx GP EVM boards + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +&{/} { + compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + model = "TI AM5728 EVM"; + + aliases { + display0 = "/display"; + display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be + // resolved here correcly based on + // information in the base dtb symbol + // table with a fix in dtc + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-user1 { + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + label = "USER1"; + linux,code = <BTN_1>; + }; + + button-user2 { + gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + label = "USER2"; + linux,code = <BTN_2>; + }; + + button-user3 { + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + label = "USER3"; + linux,code = <BTN_3>; + }; + + button-user4 { + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + label = "USER4"; + linux,code = <BTN_4>; + }; + + button-user5 { + gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + label = "USER5"; + linux,code = <BTN_5>; + }; + }; + + lcd0: display { + compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; + backlight = <&lcd_bl>; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + label = "lcd"; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 243 245 247 249 251 252 253 255>; + default-brightness-level = <8>; + pwms = <&ehrpwm1 0 50000 0>; + }; +}; + +&ehrpwm1 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reg = <0x5c>; + reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&dss { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpi_out: endpoint { + data-lines = <24>; + remote-endpoint = <&lcd_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso new file mode 100644 index 000000000000..25d74e9f3c9e --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +&{/} { + aliases { + display0 = "/display"; + display1 = "/connector"; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 1>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&dsi_bridge { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + lcd: display { + compatible = "osddisplays,osd101t2045-53ts"; + reg = <0>; + + label = "lcd"; + + backlight = <&lcd_bl>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso new file mode 100644 index 000000000000..8cea7ba32487 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&{/} { + aliases { + display0 = "/display"; + display1 = "/connector"; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 1>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&dsi_bridge { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + lcd: display { + compatible = "osddisplays,osd101t2587-53ts"; + reg = <0>; + + label = "lcd"; + + backlight = <&lcd_bl>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index be005c9f42ef..b459a670f615 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -20,6 +20,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/gpio/gpio.h> #include "armada-370.dtsi" @@ -135,6 +136,17 @@ pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + }; }; switch: switch@10 { @@ -171,8 +183,8 @@ port@5 { reg = <5>; - label = "cpu"; ethernet = <ð1>; + phy-mode = "rgmii-id"; fixed-link { speed = <1000>; full-duplex; diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts index 095df5567c93..f4c4b213ef4e 100644 --- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts @@ -148,7 +148,7 @@ port@0 { ethernet = <ð0>; - label = "cpu"; + phy-mode = "rgmii"; reg = <0>; fixed-link { diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts index c9ac630e5874..1990f7d0cc79 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts @@ -68,8 +68,13 @@ port@10 { reg = <10>; - label = "cpu"; + phy-mode = "2500base-x"; + ethernet = <ð1>; + fixed-link { + speed = <2500>; + full-duplex; + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts index fa653b379490..b795ad573891 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts @@ -48,8 +48,13 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "2500base-x"; ethernet = <ð1>; + + fixed-link { + speed = <2500>; + full-duplex; + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 85e8d966f6c1..fc8216fd9f60 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -195,7 +195,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "sgmii"; ethernet = <ð2>; fixed-link { diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 0c1f238e4c30..2d8d319bec83 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -479,7 +479,6 @@ ports@5 { reg = <5>; - label = "cpu"; ethernet = <ð1>; phy-mode = "rgmii-id"; @@ -491,7 +490,6 @@ ports@6 { reg = <6>; - label = "cpu"; ethernet = <ð0>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 2bcec5419b66..45cc784659fd 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -62,7 +62,7 @@ }; usb@58000 { - status = "ok"; + status = "okay"; }; ethernet@70000 { diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index dbe8dfe236fb..7a0614fd0c93 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -302,7 +302,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0>; fixed-link { speed = <1000>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts index 4b91600eaf62..1e0e88465254 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts @@ -251,6 +251,14 @@ pinctrl-0 = <&pinctrl_rgmii1_default>; }; +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + &fmc { status = "okay"; flash@0 { @@ -439,6 +447,26 @@ status = "okay"; }; +&i2c8 { + status = "okay"; + + gpio@77 { + compatible = "nxp,pca9539"; + reg = <0x77>; + gpio-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <2>; + + bmc-ocp0-en-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-high; + line-name = "bmc-ocp0-en-n"; + }; + }; +}; + &i2c9 { status = "okay"; }; @@ -530,13 +558,20 @@ /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", "host0-reboot-ack-n","host0-ready","host0-shd-req-n", "host0-shd-ack-n","s0-overtemp-n", - /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", + /*W0-W7*/ "","ocp-main-pwren","ocp-pgood","", "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", /*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok", "s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n", "s1-overtemp-n","s1-spi-auth-fail-n", /*Y0-Y7*/ "","","","","","","","host0-special-boot", /*Z0-Z7*/ "reset-button","ps0-pgood","ps1-pgood","","","","",""; + + ocp-aux-pwren-hog { + gpio-hog; + gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ocp-aux-pwren"; + }; }; &gpio1 { diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts index 9b4cf5ebe6d5..c4b2efbfdf56 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts @@ -63,7 +63,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; - spi-max-frequency = <100000000>; /* 100 MHz */ + spi-max-frequency = <50000000>; /* 50 MHz */ #include "openbmc-flash-layout.dtsi" }; }; @@ -202,3 +202,7 @@ status = "okay"; aspeed,lpc-io-reg = <0xca2>; }; + +&peci0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts index ff4c07c69af1..4554abf0c7cd 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts @@ -31,7 +31,7 @@ }; system-fault { - gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; panic-indicator; }; }; @@ -51,7 +51,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; - spi-max-frequency = <100000000>; /* 100 MHz */ + spi-max-frequency = <50000000>; /* 50 MHz */ #include "openbmc-flash-layout-64.dtsi" }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts index 8c05bd56ce1e..7a53f54833a0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts @@ -156,6 +156,7 @@ &i2c8 { status = "okay"; + mctp-controller; temperature-sensor@1f { compatible = "ti,tmp421"; reg = <0x1f>; @@ -165,6 +166,10 @@ compatible = "st,24c32"; reg = <0x50>; }; + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; }; &i2c9 { @@ -238,4 +243,52 @@ &gpio0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>; + + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "power-bmc-nic","presence-ocp-debug", + "power-bmc-slot1","power-bmc-slot2", + "power-bmc-slot3","power-bmc-slot4","","", + /*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary", + "reset-cause-nic-secondary","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button", + "slot3-bmc-reset-button","slot4-bmc-reset-button", + "","","","presence-emmc", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","", + "presence-mb-slot1","presence-mb-slot2", + "presence-mb-slot3","presence-mb-slot4", + /*I0-I7*/ "","","","","","","bb-bmc-button","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","", + /*N0-N7*/ "","","","","bmc-ready","","","", + /*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable", + /*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable", + "reset-cause-pcie-slot1","reset-cause-pcie-slot2", + "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","GND", + /*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button", + "bmc-slot3-ac-button","bmc-slot4-ac-button", + "","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","reset-cause-emmc","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","","","","", + /*18C0-18C7*/ "","","","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","","","","","",""; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts index a5be0ee048ec..81902cbe662c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts @@ -552,14 +552,14 @@ &i2c3 { status = "okay"; - power-supply@58 { - compatible = "ibm,cffps"; - reg = <0x58>; + power-supply@5a { + compatible = "acbel,fsg032"; + reg = <0x5a>; }; - power-supply@59 { - compatible = "ibm,cffps"; - reg = <0x59>; + power-supply@5b { + compatible = "acbel,fsg032"; + reg = <0x5b>; }; }; @@ -686,7 +686,7 @@ }; eeprom@50 { - compatible = "atmel,24c64"; + compatible = "atmel,24c128"; reg = <0x50>; }; @@ -884,16 +884,6 @@ use-ncsi; }; -&mac3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rmii4_default>; - clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, - <&syscon ASPEED_CLK_MAC4RCLK>; - clock-names = "MACCLK", "RCLK"; - use-ncsi; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index c3b0cd61ac85..c6f8f20914d1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -162,6 +162,11 @@ #size-cells = <1>; ranges; + event_log: tcg_event_log@b3d00000 { + no-map; + reg = <0xb3d00000 0x100000>; + }; + ramoops@b3e00000 { compatible = "ramoops"; reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ @@ -1887,6 +1892,7 @@ tpm@2e { compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; reg = <0x2e>; + memory-region = <&event_log>; }; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 8246a60de0d0..172dd748d807 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -863,6 +863,15 @@ clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; status = "disabled"; }; + + udma: dma-controller@1e79e000 { + compatible = "aspeed,ast2600-udma"; + reg = <0x1e79e000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <28>; + #dma-cells = <1>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 180e4b1aa2f6..5cd593028aff 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -578,7 +578,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 8aa9e8dea337..95ecb7d040a8 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -43,7 +43,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 83bcf9fe0152..4617805c7748 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -220,7 +220,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 1346b8f2b259..999adeca6f33 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -669,7 +669,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi index f4b2db9bc4ab..cd25ed2757b7 100644 --- a/arch/arm/boot/dts/bcm47622.dtsi +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -88,6 +88,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -119,6 +125,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index b774a8d63813..93281c47c9ba 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -66,6 +66,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; /* ARM bus */ @@ -203,6 +209,18 @@ status = "disabled"; }; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + nand_controller: nand-controller@2000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi index 7cd55d64de71..ba7f265db121 100644 --- a/arch/arm/boot/dts/bcm63148.dtsi +++ b/arch/arm/boot/dts/bcm63148.dtsi @@ -60,6 +60,12 @@ #clock-cells = <0>; clock-frequency = <50000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi index 043e699cbc27..d8268a1e889b 100644 --- a/arch/arm/boot/dts/bcm63178.dtsi +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -71,6 +71,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -78,6 +79,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -109,6 +116,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi index 5c72219bc194..49ecc1f0c18c 100644 --- a/arch/arm/boot/dts/bcm6756.dtsi +++ b/arch/arm/boot/dts/bcm6756.dtsi @@ -88,6 +88,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -119,6 +125,19 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi index 81513a793815..fbc7d3a5dc5f 100644 --- a/arch/arm/boot/dts/bcm6846.dtsi +++ b/arch/arm/boot/dts/bcm6846.dtsi @@ -61,6 +61,12 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi index 5fa5feac0e29..5e0fe26530f1 100644 --- a/arch/arm/boot/dts/bcm6855.dtsi +++ b/arch/arm/boot/dts/bcm6855.dtsi @@ -78,6 +78,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -109,6 +115,19 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi index 4ec836ac4baf..96529d3d4dc2 100644 --- a/arch/arm/boot/dts/bcm6878.dtsi +++ b/arch/arm/boot/dts/bcm6878.dtsi @@ -61,6 +61,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -68,6 +69,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -100,6 +107,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts index 6f083724ab8e..93b8ce22678d 100644 --- a/arch/arm/boot/dts/bcm947622.dts +++ b/arch/arm/boot/dts/bcm947622.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts index d28c4f130ca2..1b405c249213 100644 --- a/arch/arm/boot/dts/bcm963138.dts +++ b/arch/arm/boot/dts/bcm963138.dts @@ -25,3 +25,7 @@ &serial0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 15bec75be74c..b5af61853a07 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -50,3 +50,7 @@ &sata_phy { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts index 98f6a6d09f50..1f5d6d783f09 100644 --- a/arch/arm/boot/dts/bcm963148.dts +++ b/arch/arm/boot/dts/bcm963148.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts index fa096e9cde23..d036e99dd8d1 100644 --- a/arch/arm/boot/dts/bcm963178.dts +++ b/arch/arm/boot/dts/bcm963178.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts index 9a4a87ba9c8a..8b104f3fb14a 100644 --- a/arch/arm/boot/dts/bcm96756.dts +++ b/arch/arm/boot/dts/bcm96756.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts index c70ebccabc19..55852c229608 100644 --- a/arch/arm/boot/dts/bcm96846.dts +++ b/arch/arm/boot/dts/bcm96846.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts index 4438152561ac..2ad880af2104 100644 --- a/arch/arm/boot/dts/bcm96855.dts +++ b/arch/arm/boot/dts/bcm96855.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts index 8fbc175cb452..b7af8ade7a9d 100644 --- a/arch/arm/boot/dts/bcm96878.dts +++ b/arch/arm/boot/dts/bcm96878.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1fdd9a249165..0ca849885d1f 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -415,7 +415,7 @@ &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; - status = "ok"; + status = "okay"; cs3 { #address-cells = <2>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 85408d4c6f2e..062c86361640 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -422,7 +422,7 @@ clocks = <&gate_clk 3>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; + status = "okay"; }; audio0: audio-controller@b0000 { diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index 94944cc21931..dd03e3860f97 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -311,6 +311,7 @@ &usbotg1 { pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; disable-over-current; srp-disable; hnp-disable; diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi index ace3eb8a97b8..4e1bf080eaca 100644 --- a/arch/arm/boot/dts/e70k02.dtsi +++ b/arch/arm/boot/dts/e70k02.dtsi @@ -321,6 +321,7 @@ &usbotg1 { pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; disable-over-current; srp-disable; hnp-disable; diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts index a1e22f630638..660cc7fac4db 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -16,6 +16,10 @@ model = "Samsung ARTIK5 evaluation board"; compatible = "samsung,artik5-eval", "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + + aliases { + mmc0 = &mshc_2; + }; }; &mshc_2 { diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 0ac3f284fbb8..3fdd922e635c 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -17,6 +17,11 @@ / { compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + aliases { + mmc0 = &mshc_0; + mmc1 = &mshc_1; + }; + chosen { stdout-path = &serial_2; }; @@ -321,6 +326,7 @@ vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 80d90fe7fad1..2de877d4ccc5 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -22,6 +22,7 @@ aliases { i2c7 = &i2c_max77836; + mmc0 = &mshc_0; }; memory@40000000 { @@ -443,6 +444,7 @@ vmmc-supply = <&vemmc_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 1f9cba0607e1..88fb3e68ff02 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -23,6 +23,8 @@ aliases { i2c7 = &i2c_max77836; + mmc0 = &mshc_0; + mmc1 = &mshc_1; }; chosen { @@ -624,6 +626,7 @@ vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 28bb2ce8ccf7..bd37f1b587f0 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -28,9 +28,6 @@ aliases { pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; - mshc0 = &mshc_0; - mshc1 = &mshc_1; - mshc2 = &mshc_2; spi0 = &spi_0; spi1 = &spi_1; i2c0 = &i2c_0; @@ -346,7 +343,7 @@ }; pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos3250-pmu", "syscon"; + compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon"; reg = <0x10020000 0x4000>; interrupt-controller; #interrupt-cells = <3>; @@ -354,12 +351,11 @@ clock-names = "clkout8"; clocks = <&cmu CLK_FIN_PLL>; #clock-cells = <1>; - }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; pd_cam: power-domain@10023c00 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 44dcb1377475..8dd6976ab0a7 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -105,12 +105,6 @@ reg = <0x12570000 0x14>; }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - pd_mfc: power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023c40 0x20>; @@ -181,11 +175,16 @@ }; pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4210-pmu", "syscon"; + compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon"; reg = <0x10020000 0x4000>; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; dsi_0: dsi@11c80000 { diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index bba85011ecc9..37cd4dde53e4 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -25,6 +25,12 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 1103e7f92b57..f1927ca15e08 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -30,6 +30,11 @@ 0x70000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial2:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 181c99eca675..b566f878ed84 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -25,6 +25,10 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index b8e9dd23fc51..ff6ee4b2c31b 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -26,6 +26,12 @@ 0x70000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; stdout-path = "serial2:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 62bf335d5bed..8fe0d5d2be2d 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -24,6 +24,12 @@ 0x50000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; stdout-path = "serial2:115200n8"; @@ -516,7 +522,7 @@ }; &mct { - compatible = "none"; + status = "disabled"; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index b596e997e451..ded232b04e0d 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -20,6 +20,10 @@ model = "TOPEET iTop 4412 Elite board based on Exynos4412"; compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4"; + aliases { + mmc1 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait"; stdout-path = "serial2:115200n8"; @@ -182,7 +186,7 @@ compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clock-names = "mclk"; wlf,shared-lrclk; #sound-dai-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index e42e39dc0e40..7bc6968af9c3 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -23,6 +23,10 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &mshc_0; + }; + firmware@203f000 { compatible = "samsung,secure-firmware"; reg = <0x0203f000 0x1000>; @@ -476,6 +480,7 @@ vmmc-supply = <&buck9_reg>; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 525f945c4b91..e6b949c1a00f 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -25,6 +25,9 @@ aliases { i2c11 = &i2c_max77693; i2c12 = &i2c_max77693_fuel; + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + mmc3 = &sdhci_3; }; chosen { @@ -497,8 +500,7 @@ pinctrl-0 = <&fimc_is_uart>; pinctrl-names = "default"; status = "okay"; - - }; +}; &fimc_lite_0 { status = "okay"; @@ -592,7 +594,6 @@ /* CAM_B_CLKOUT */ clocks = <&camera 1>; clock-names = "extclk"; - samsung,camclk-out = <1>; gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { @@ -979,6 +980,7 @@ samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + mmc-ddr-1_8v; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 7c2780d3e37c..45ef7b7ba7e0 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -13,6 +13,11 @@ #include "exynos-mfc-reserved-memory.dtsi" / { + aliases { + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + }; + chosen { stdout-path = &serial_1; }; @@ -533,6 +538,7 @@ broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index ea9fd284386d..23b151645d66 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -25,6 +25,11 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &mshc_0; + mmc1 = &sdhci_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -498,6 +503,7 @@ broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi index 3e05a49f29ff..0b89d5682f85 100644 --- a/arch/arm/boot/dts/exynos4412-p4note.dtsi +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -26,6 +26,12 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + mmc3 = &sdhci_3; + }; + chosen { stdout-path = &serial_2; }; @@ -188,14 +194,12 @@ pinctrl-names = "default"; interrupt-parent = <&gpx0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - irq-trigger = <0x1>; st,adc-freq = <3>; st,mod-12b = <1>; st,ref-sel = <0>; st,sample-time = <3>; - stmpe_adc { + adc { compatible = "st,stmpe-adc"; #io-channel-cells = <1>; st,norequest-mask = <0x2f>; @@ -695,6 +699,7 @@ samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + mmc-ddr-1_8v; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; bus-width = <4>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a40ff394977c..715dfcba1417 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -22,6 +22,10 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index e0b6162d2e2a..5a2dcdc5c28b 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -17,6 +17,10 @@ model = "FriendlyARM TINY4412 board based on Exynos4412"; compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4"; + aliases { + mmc0 = &sdhci_2; + }; + chosen { stdout-path = &serial_0; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 11f9dd94b6b3..82a36fb5ee8b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -28,7 +28,6 @@ pinctrl3 = &pinctrl_3; fimc-lite0 = &fimc_lite_0; fimc-lite1 = &fimc_lite_1; - mshc0 = &mshc_0; }; bus_acp: bus-acp { @@ -798,7 +797,7 @@ }; &pmu_system_controller { - compatible = "samsung,exynos4412-pmu", "syscon"; + compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon"; clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 2e3da5670bc2..d586189966da 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -23,6 +23,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -192,12 +197,15 @@ vddio-supply = <&vcc_1v8_reg>; vddlvds-supply = <&vcc_3v3_reg>; reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - bridge_out_ep: endpoint { - remote-endpoint = <&panel_ep>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + bridge_out_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; }; }; }; @@ -586,6 +594,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; &mmc_2 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 831b3494bd46..bb623726ef1e 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -17,6 +17,8 @@ compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5"; aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; }; memory@40000000 { @@ -350,6 +352,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; &mmc_2 { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 3d84b9c6dea3..59b2cc35c37b 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -15,6 +15,9 @@ / { aliases { i2c104 = &i2c_104; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* SD */ + mmc2 = &mmc_3; /* WiFi */ }; memory@40000000 { @@ -549,6 +552,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; /* uSD card */ diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 5eca10ecd550..c12bb17631b7 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -23,6 +23,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_1; + }; + chosen { bootargs = "console=tty1"; stdout-path = "serial3:115200n8"; @@ -431,6 +436,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; /* diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 60a623e3a200..1a4c6c028d03 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -30,10 +30,6 @@ gsc1 = &gsc_1; gsc2 = &gsc_2; gsc3 = &gsc_3; - mshc0 = &mmc_0; - mshc1 = &mmc_1; - mshc2 = &mmc_2; - mshc3 = &mmc_3; i2c4 = &i2c_4; i2c5 = &i2c_5; i2c6 = &i2c_6; @@ -290,7 +286,7 @@ }; pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5250-pmu", "syscon"; + compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon"; reg = <0x10040000 0x5000>; clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; @@ -298,6 +294,16 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + dp_phy: dp-phy { + compatible = "samsung,exynos5250-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; watchdog@101d0000 { @@ -810,18 +816,6 @@ status = "disabled"; }; - dp_phy: video-phy-0 { - compatible = "samsung,exynos5250-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: video-phy-1 { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - dsi_0: dsi@14500000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x14500000 0x10000>; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 387b8494f18f..d072a7398866 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -18,6 +18,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -89,6 +94,7 @@ cap-mmc-highspeed; mmc-hs200-1_8v; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 6ddd1dd2fb0b..882fc77c4bc4 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -21,6 +21,8 @@ aliases { ethernet = ðernet; + mmc0 = &mmc_0; + mmc1 = &mmc_2; }; memory@40000000 { @@ -513,6 +515,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; vmmc-supply = <&ldo20_reg>; vqmmc-supply = <&ldo11_reg>; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index b8f953c41c73..bb29b76f6f6a 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -18,6 +18,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -61,6 +66,7 @@ cap-mmc-highspeed; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 55b7759682a9..809ddda02e53 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -23,6 +23,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial3:115200n8"; }; @@ -778,6 +783,7 @@ status = "okay"; non-removable; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi index 63675fe189cd..f525b2f5e4e0 100644 --- a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi +++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi @@ -28,6 +28,11 @@ * for more details. */ + aliases { + mmc0 = &mmc_0; + mmc2 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -604,6 +609,7 @@ bus-width = <8>; cap-mmc-highspeed; card-detect-delay = <200>; + mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9e2123470cad..7a48f2b32819 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -31,6 +31,9 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* uSD */ + mmc2 = &mmc_1; /* WiFi */ }; backlight: backlight { @@ -722,6 +725,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 4d7b6d9008a7..e299344e427a 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -21,6 +21,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { bootargs = "init=/linuxrc"; stdout-path = "serial2:115200n8"; @@ -355,6 +360,7 @@ status = "okay"; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 13d7be236a23..dd291f1199f2 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -19,9 +19,6 @@ compatible = "samsung,exynos5420", "samsung,exynos5"; aliases { - mshc0 = &mmc_0; - mshc1 = &mmc_1; - mshc2 = &mmc_2; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -696,18 +693,6 @@ status = "disabled"; }; - dp_phy: dp-video-phy { - compatible = "samsung,exynos5420-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: mipi-video-phy { - compatible = "samsung,exynos5420-mipi-video-phy"; - syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - dsi: dsi@14500000 { compatible = "samsung,exynos5410-mipi-dsi"; reg = <0x14500000 0x10000>; @@ -933,7 +918,7 @@ }; pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5420-pmu", "syscon"; + compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon"; reg = <0x10040000 0x5000>; clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; @@ -941,6 +926,16 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + dp_phy: dp-phy { + compatible = "samsung,exynos5420-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi_phy: mipi-phy { + compatible = "samsung,exynos5420-mipi-video-phy"; + #phy-cells = <1>; + }; }; tmu_cpu0: tmu@10060000 { diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 30fc677d8bac..2f5b8602e020 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -19,6 +19,10 @@ reg = <0x40000000 0x7ea00000>; }; + aliases { + mmc2 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index e6e7e2ff2a26..b4a851aa8881 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -13,6 +13,10 @@ #include "exynos5422-odroid-core.dtsi" / { + aliases { + mmc0 = &mmc_0; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -472,6 +476,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; max-frequency = <200000000>; diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts index df41723d56d4..c35261a338ff 100644 --- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts +++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts @@ -19,6 +19,10 @@ chassis-type = "handset"; + aliases { + mmc0 = &mmc_0; + }; + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x80000000>; /* 2 GiB */ @@ -597,6 +601,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 0ebcb66c6319..1f544f12da6c 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -29,6 +29,9 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* SD */ + mmc2 = &mmc_1; /* WiFi */ }; backlight: backlight { @@ -703,6 +706,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index ce356c469e1e..d7f5daecc9dc 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -24,42 +24,42 @@ amba-bus { dual_timer0: dual_timer@800000 { - status = "ok"; + status = "okay"; }; uart0: serial@b00000 { /* console */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; - status = "ok"; + status = "okay"; }; uart1: serial@b01000 { /* modem */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; - status = "ok"; + status = "okay"; }; uart2: serial@b02000 { /* audience */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; - status = "ok"; + status = "okay"; }; uart3: serial@b03000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; - status = "ok"; + status = "okay"; }; uart4: serial@b04000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; - status = "ok"; + status = "okay"; }; pmx0: pinmux@803000 { diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index f5691dbc26d2..0210064bf6a5 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -23,7 +23,7 @@ soc { uart0: serial@4007000 { - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 14a92fe59770..98672932e41b 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -14,67 +14,59 @@ device_type = "memory"; reg = <0x40000000 0x08000000>; }; +}; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x300000>; - }; +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; - partition@300000 { - label = "env"; - reg = <0x300000 0x80000>; - }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; - partition@380000 { - label = "env2"; - reg = <0x380000 0x80000>; - }; + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; - partition@400000 { - label = "dtb"; - reg = <0x400000 0x80000>; - }; + partition@300000 { + label = "env"; + reg = <0x300000 0x80000>; + }; - partition@480000 { - label = "splash"; - reg = <0x480000 0x80000>; - }; + partition@380000 { + label = "env2"; + reg = <0x380000 0x80000>; + }; - partition@500000 { - label = "kernel"; - reg = <0x500000 0x800000>; - }; + partition@400000 { + label = "dtb"; + reg = <0x400000 0x80000>; + }; - partition@d00000 { - label = "rootfs"; - reg = <0xd00000 0xf300000>; - }; - }; - }; + partition@480000 { + label = "splash"; + reg = <0x480000 0x80000>; + }; - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - }; + partition@500000 { + label = "kernel"; + reg = <0x500000 0x800000>; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - status = "okay"; - }; + partition@d00000 { + label = "rootfs"; + reg = <0xd00000 0xf300000>; }; }; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 1b253b47006c..4704b6141836 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -10,166 +10,6 @@ model = "Armadeus Systems APF28Dev docking/development board"; compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_apf28dev>; - - hog_pins_apf28dev: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D16__GPIO_1_16 - MX28_PAD_LCD_D17__GPIO_1_17 - MX28_PAD_LCD_D18__GPIO_1_18 - MX28_PAD_LCD_D19__GPIO_1_19 - MX28_PAD_LCD_D20__GPIO_1_20 - MX28_PAD_LCD_D21__GPIO_1_21 - MX28_PAD_LCD_D22__GPIO_1_22 - MX28_PAD_GPMI_CE1N__GPIO_0_17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_apf28dev: lcdif-apf28dev@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - usb0_otg_apf28dev: otg-apf28dev@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D23__GPIO_1_23 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_16bit_pins_a - &lcdif_pins_apf28dev>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <16>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33000033>; - hactive = <800>; - vactive = <480>; - hback-porch = <96>; - hfront-porch = <96>; - vback-porch = <20>; - vfront-porch = <21>; - hsync-len = <64>; - vsync-len = <4>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; - }; - - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - xceiver-supply = <®_can0_vcc>; - status = "okay"; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - uart-has-rtscts; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_apf28dev - &usb0_id_pins_b>; - vbus-supply = <®_usb0_vbus>; - status = "okay"; - }; - - usb1: usb@80090000 { - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -223,3 +63,155 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + uart-has-rtscts; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can0_vcc>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_16bit_pins_a + &lcdif_pins_apf28dev>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_apf28dev>; + + hog_pins_apf28dev: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D16__GPIO_1_16 + MX28_PAD_LCD_D17__GPIO_1_17 + MX28_PAD_LCD_D18__GPIO_1_18 + MX28_PAD_LCD_D19__GPIO_1_19 + MX28_PAD_LCD_D20__GPIO_1_20 + MX28_PAD_LCD_D21__GPIO_1_21 + MX28_PAD_LCD_D22__GPIO_1_22 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_apf28dev: lcdif-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_otg_apf28dev: otg-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D23__GPIO_1_23 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_apf28dev + &usb0_id_pins_b>; + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index b86be320496b..f9bf40d96568 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -11,200 +11,6 @@ reg = <0x40000000 0x04000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; - bus-width = <4>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_CE1N__GPIO_0_17 - MX28_PAD_GPMI_RDY1__GPIO_0_21 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_LCD_RESET__GPIO_3_30 - MX28_PAD_JTAG_RTCK__GPIO_4_20 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_apx4: lcdif-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA4__SSP2_D0 - MX28_PAD_SSP0_DATA5__SSP2_D3 - MX28_PAD_SSP0_DATA6__SSP2_CMD - MX28_PAD_SSP0_DATA7__SSP2_SCK - MX28_PAD_SSP2_SS1__SSP2_D1 - MX28_PAD_SSP2_SS2__SSP2_D2 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__SSP2_SCK - >; - fsl,drive-strength = <MXS_DRIVE_12mA>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_apx4>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - vback-porch = <32>; - vfront-porch = <13>; - hsync-len = <48>; - vsync-len = <3>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; - }; - }; - - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; - - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - pcf8563: rtc@51 { - compatible = "phg,pcf8563"; - reg = <0x51>; - }; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_2pins_a>; - status = "okay"; - }; - - auart2: serial@8006e000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart2_2pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -238,3 +44,189 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; +}; + +&auart2 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_apx4>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <32>; + vfront-porch = <13>; + hsync-len = <48>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; + + pcf8563: rtc@51 { + compatible = "phg,pcf8563"; + reg = <0x51>; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_JTAG_RTCK__GPIO_4_20 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_apx4: lcdif-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA4__SSP2_D0 + MX28_PAD_SSP0_DATA5__SSP2_D3 + MX28_PAD_SSP0_DATA6__SSP2_CMD + MX28_PAD_SSP0_DATA7__SSP2_SCK + MX28_PAD_SSP2_SS1__SSP2_D1 + MX28_PAD_SSP2_SS2__SSP2_D2 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; + bus-width = <4>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usbphy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 85aa1cc3ff66..d004b1cbb4ae 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -16,107 +16,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - ssd1306_cfa10036: ssd1306-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins_cfa10036: leds-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_RX__GPIO_3_4 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - usb0_otg_cfa10036: otg-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_RDY0__USB0_ID - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x31c3 /* - MX28_PAD_PWM3__GPIO_3_28 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - vmmc-supply = <®_vddio_sd0>; - bus-width = <4>; - status = "okay"; - }; - }; - - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_b>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_b>; - clock-frequency = <400000>; - status = "okay"; - - ssd1306: oled@3c { - compatible = "solomon,ssd1306fb-i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&ssd1306_cfa10036>; - reg = <0x3c>; - reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - solomon,height = <32>; - solomon,width = <128>; - solomon,page-offset = <0>; - solomon,com-lrremap; - solomon,com-invdir; - solomon,com-offset = <32>; - }; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_cfa10036>; - dr_mode = "peripheral"; - phy_type = "utmi"; - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -138,3 +37,95 @@ gpio = <&gpio3 28 0>; }; }; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_b>; + clock-frequency = <400000>; + status = "okay"; + + ssd1306: oled@3c { + compatible = "solomon,ssd1306fb-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&ssd1306_cfa10036>; + reg = <0x3c>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + solomon,height = <32>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + }; +}; + +&pinctrl { + ssd1306_cfa10036: ssd1306-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_cfa10036: leds-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__GPIO_3_4 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_otg_cfa10036: otg-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY0__USB0_ID + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31c3 /* + MX28_PAD_PWM3__GPIO_3_28 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + vmmc-supply = <®_vddio_sd0>; + bus-width = <4>; + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_cfa10036>; + dr_mode = "peripheral"; + phy_type = "utmi"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 9ef0d567ea48..94d6614c1983 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -78,226 +78,6 @@ }; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10049: usb-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - i2cmux_pins_cfa10049: i2cmux-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D22__GPIO_1_22 - MX28_PAD_LCD_D23__GPIO_1_23 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_pins_cfa10049: mac0-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS2__GPIO_2_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - pca_pins_cfa10049: pca-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS0__GPIO_2_19 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - rotary_pins_cfa10049: rotary-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - rotary_btn_pins_cfa10049: rotary-btn-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF1_SDATA0__GPIO_3_26 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - spi2_pins_cfa10049: spi2-cfa10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - spi3_pins_cfa10049: spi3-cfa10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_RDN__GPIO_0_24 - MX28_PAD_GPMI_RESETN__GPIO_0_28 - MX28_PAD_GPMI_CE1N__GPIO_0_17 - MX28_PAD_GPMI_ALE__GPIO_0_26 - MX28_PAD_GPMI_CLE__GPIO_0_27 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10049: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - w1_gpio_pins: w1-gpio@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D21__GPIO_1_21 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */ - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10049 - &lcdif_pins_cfa10049 - &lcdif_pins_cfa10049_pullup>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9216000>; - hactive = <320>; - vactive = <480>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <15>; - vsync-len = <15>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - - i2c1: i2c@8005a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -315,18 +95,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a - &mac0_pins_cfa10049>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -426,3 +194,225 @@ gpios = <&gpio1 21 0>; }; }; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10049 + &lcdif_pins_cfa10049 + &lcdif_pins_cfa10049_pullup>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a + &mac0_pins_cfa10049>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10049: usb-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + i2cmux_pins_cfa10049: i2cmux-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D22__GPIO_1_22 + MX28_PAD_LCD_D23__GPIO_1_23 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_pins_cfa10049: mac0-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS2__GPIO_2_21 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + pca_pins_cfa10049: pca-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS0__GPIO_2_19 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + rotary_pins_cfa10049: rotary-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + rotary_btn_pins_cfa10049: rotary-btn-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF1_SDATA0__GPIO_3_26 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + spi2_pins_cfa10049: spi2-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + spi3_pins_cfa10049: spi3-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_GPMI_RESETN__GPIO_0_28 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_ALE__GPIO_0_26 + MX28_PAD_GPMI_CLE__GPIO_0_27 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10049: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + w1_gpio_pins: w1-gpio@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D21__GPIO_1_21 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */ + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index fac5bbda7a93..42ba7da48beb 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -14,121 +14,6 @@ model = "Crystalfontz CFA-10055 Board"; compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - spi2_pins_cfa10055: spi2-cfa10055@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10055: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10055 - &lcdif_pins_cfa10055 - &lcdif_pins_cfa10055_pullup>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9216000>; - hactive = <320>; - vactive = <480>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <15>; - vsync-len = <15>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -159,3 +44,112 @@ default-brightness-level = <6>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10055 + &lcdif_pins_cfa10055 + &lcdif_pins_cfa10055_pullup>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&pinctrl { + spi2_pins_cfa10055: spi2-cfa10055@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10055: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index c5f3337e8b39..0e15bdfd7281 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -13,81 +13,6 @@ model = "Crystalfontz CFA-10056 Board"; compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - spi2_pins_cfa10056: spi2-cfa10056@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_pins_cfa10056: lcdif-10056@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_cfa10056 - &lcdif_pins_cfa10056_pullup >; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <32000000>; - hactive = <480>; - vactive = <800>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <5>; - vsync-len = <5>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -111,3 +36,74 @@ }; }; }; + +&pinctrl { + spi2_pins_cfa10056: spi2-cfa10056@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_pins_cfa10056: lcdif-10056@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10056 + &lcdif_pins_cfa10056_pullup >; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <32000000>; + hactive = <480>; + vactive = <800>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <5>; + vsync-len = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 2f7e479dbc74..27602c01f162 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -14,126 +14,6 @@ model = "Crystalfontz CFA-10057 Board"; compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10057: usb-10057@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10057: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10057 - &lcdif_pins_cfa10057>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <480>; - vactive = <800>; - hfront-porch = <12>; - hback-porch = <2>; - vfront-porch = <5>; - vback-porch = <3>; - hsync-len = <2>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm4_pins_a>; - status = "okay"; - }; - - i2c1: i2c@8005a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -151,17 +31,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 4 5000000>; @@ -169,3 +38,124 @@ default-brightness-level = <7>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10057 + &lcdif_pins_cfa10057>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <12>; + hback-porch = <2>; + vfront-porch = <5>; + vback-porch = <3>; + hsync-len = <2>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10057: usb-10057@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10057: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 4465fd86785a..931c4d089b26 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -14,93 +14,6 @@ model = "Crystalfontz CFA-10058 Board"; compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10058: usb-10058@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10058: lcdif-10058@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_cfa10058>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <40>; - hfront-porch = <40>; - vback-porch = <13>; - vfront-porch = <29>; - hsync-len = <8>; - vsync-len = <8>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -118,17 +31,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 3 5000000>; @@ -136,3 +38,91 @@ default-brightness-level = <6>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10058>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <40>; + vback-porch = <13>; + vfront-porch = <29>; + hsync-len = <8>; + vsync-len = <8>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10058: usb-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10058: lcdif-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts index d451fa018d83..b73020ff1053 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -5,172 +5,13 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 485"; compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - rs485-red { label = "duckbill:red:rs485"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; @@ -182,3 +23,16 @@ }; }; }; + +&i2c0 { + status = "disabled"; +}; + +&led_pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index 73f521c46c1e..473d99b9b42f 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -5,184 +5,14 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 EnOcean"; compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - MX28_PAD_AUART0_CTS__GPIO_3_2 - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - enocean_button: enocean-button@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART0_RTS__GPIO_3_3 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - enocean-blue { label = "duckbill:blue:enocean"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; @@ -211,3 +41,29 @@ }; }; }; + +&i2c0 { + status = "disabled"; +}; + +&led_pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_AUART0_CTS__GPIO_3_2 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; +}; + +&pinctrl { + enocean_button: enocean-button@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts index 0e8be5975709..859d97a5a775 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -5,9 +5,7 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 SPI"; @@ -16,179 +14,50 @@ aliases { ethernet1 = &qca7000; }; +}; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - qca7000: ethernet@0 { - reg = <0>; - compatible = "qca,qca7000"; - pinctrl-names = "default"; - pinctrl-0 = <&qca7000_pins>; - interrupt-parent = <&gpio3>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - spi-cpha; - spi-cpol; - spi-max-frequency = <8000000>; - }; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: led@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - qca7000_pins: qca7000@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ - MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ - MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ - MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ - MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ - MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; +&auart0 { + status = "disabled"; +}; - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; +&i2c0 { + status = "disabled"; +}; - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; +&pinctrl { + qca7000_pins: qca7000@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ + MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ + MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ + MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ + MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ + MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; +}; - leds { - compatible = "gpio-leds"; +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + /delete-property/ bus-width; + /delete-property/ vmmc-supply; + status = "okay"; + + qca7000: ethernet@0 { + reg = <0>; + compatible = "qca,qca7000"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; + pinctrl-0 = <&qca7000_pins>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <8000000>; }; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts index 23fd3036404d..4e28212e9626 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -18,138 +18,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -176,3 +44,127 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&lradc { + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_phy_int_pin>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + max-speed = <100>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_int_pin: mac0-phy-int@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + status = "okay"; + non-removable; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_b + &mmc2_cd_cfg &mmc2_sck_cfg_b>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index c666afb12445..13ffd533fdea 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -17,108 +17,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_RX__GPIO_3_4 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - status = "okay"; - }; - }; - reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -145,3 +43,97 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&lradc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__GPIO_3_4 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 1053b7c584d8..783abb82b2a8 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -95,266 +95,258 @@ }; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg - &gpmi_pins_evk>; - status = "okay"; - }; + sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - wp-gpios = <&gpio2 12 0>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio3_5>; - ssp1: spi@80012000 { - compatible = "fsl,imx28-mmc"; - bus-width = <8>; - wp-gpios = <&gpio0 28 0>; - }; + user { + label = "Heartbeat"; + gpios = <&gpio3 5 0>; + linux,default-trigger = "heartbeat"; + }; + }; - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "sst,sst25vf016b", "jedec,spi-nor"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; + backlight_display: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP1_CMD__GPIO_2_13 - MX28_PAD_SSP1_DATA3__GPIO_2_15 - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 - MX28_PAD_SSP1_SCK__GPIO_2_12 - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_LCD_RESET__GPIO_3_30 - MX28_PAD_AUART2_RX__GPIO_3_8 - MX28_PAD_AUART2_TX__GPIO_3_9 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pin_gpio3_5: led_gpio3_5@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - gpmi_pins_evk: gpmi-nand-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_CE1N__GPMI_CE1N - MX28_PAD_GPMI_RDY1__GPMI_READY1 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_evk: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + uart-has-rtscts; + status = "okay"; +}; - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_evk>; - status = "okay"; - - port { - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; +}; - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - xceiver-supply = <®_can_3v3>; - status = "okay"; - }; +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; - can1: can@80034000 { - pinctrl-names = "default"; - pinctrl-0 = <&can1_pins_a>; - xceiver-supply = <®_can_3v3>; - status = "okay"; - }; - }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg + &gpmi_pins_evk>; + status = "okay"; +}; - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - fsl,ave-ctrl = <4>; - fsl,ave-delay = <2>; - fsl,settling = <10>; - }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_evk>; + status = "okay"; - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - at24@51 { - compatible = "atmel,24c32"; - pagesize = <32>; - reg = <0x51>; - }; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pins_a>; - status = "okay"; - }; +&lradc { + fsl,lradc-touchscreen-wires = <4>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; + status = "okay"; +}; - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - uart-has-rtscts; - status = "okay"; - }; + at24@51 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x51>; + }; +}; - auart3: serial@80070000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart3_pins_a>; - status = "okay"; - }; +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; - usbphy0: usbphy@8007c000 { - status = "okay"; - }; +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP1_DATA3__GPIO_2_15 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_pins_a>; - vbus-supply = <®_usb0_vbus>; - status = "okay"; - }; - - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; + led_pin_gpio3_5: led_gpio3_5@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; + gpmi_pins_evk: gpmi-nand-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE1N__GPMI_CE1N + MX28_PAD_GPMI_RDY1__GPMI_READY1 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; - sound { - compatible = "fsl,imx28-evk-sgtl5000", - "fsl,mxs-audio-sgtl5000"; - model = "imx28-evk-sgtl5000"; - saif-controllers = <&saif0 &saif1>; - audio-codec = <&sgtl5000>; + lcdif_pins_evk: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pin_gpio3_5>; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; +}; - user { - label = "Heartbeat"; - gpios = <&gpio3 5 0>; - linux,default-trigger = "heartbeat"; - }; - }; +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; - backlight_display: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 2 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio2 12 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp1 { + compatible = "fsl,imx28-mmc"; + bus-width = <8>; + wp-gpios = <&gpio0 28 0>; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + spi-max-frequency = <40000000>; }; }; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pins_a>; + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 2bdb4c093545..c08b14ad7cd5 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -14,31 +14,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - }; - }; - - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - rtc: rtc@68 { - compatible = "st,m41t62"; - reg = <0x68>; - }; - }; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -54,3 +29,22 @@ }; }; }; + +&gpmi { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@68 { + compatible = "st,m41t62"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 865ac3d573c7..6b01de9efd02 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -15,187 +15,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - - partition@0 { - label = "gpmi-nfc-0-boot"; - reg = <0x00000000 0x01400000>; - read-only; - }; - - partition@1 { - label = "gpmi-nfc-general-use"; - reg = <0x01400000 0x0ec00000>; - }; - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <4>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_a - &mmc2_cd_cfg - &mmc2_sck_cfg_a>; - bus-width = <4>; - vmmc-supply = <®_vddio_sd1>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS0__GPIO_2_19 - MX28_PAD_PWM4__GPIO_3_29 - MX28_PAD_AUART2_RX__GPIO_3_8 - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_m28: lcdif-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_VSYNC__LCD_VSYNC - MX28_PAD_LCD_HSYNC__LCD_HSYNC - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK - MX28_PAD_LCD_RESET__LCD_RESET - MX28_PAD_LCD_CS__LCD_ENABLE - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins_gpio: leds-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP3_MISO__GPIO_2_26 - MX28_PAD_SSP3_SCK__GPIO_2_24 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - ocotp@8002c000 { - status = "okay"; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_m28>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <6410256>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hfront-porch = <20>; - vback-porch = <15>; - vfront-porch = <5>; - hsync-len = <30>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_b>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - auart3: serial@80070000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart3_2pins_b>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - disable-over-current; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 3 5000000>; @@ -264,3 +83,176 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_2pins_b>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&gpmi { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "gpmi-nfc-0-boot"; + reg = <0x00000000 0x01400000>; + read-only; + }; + + partition@1 { + label = "gpmi-nfc-general-use"; + reg = <0x01400000 0x0ec00000>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <6410256>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hfront-porch = <20>; + vback-porch = <15>; + vfront-porch = <5>; + hsync-len = <30>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&ocotp { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS0__GPIO_2_19 + MX28_PAD_PWM4__GPIO_3_29 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_VSYNC__LCD_VSYNC + MX28_PAD_LCD_HSYNC__LCD_HSYNC + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_RESET__LCD_RESET + MX28_PAD_LCD_CS__LCD_ENABLE + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_gpio: leds-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP3_MISO__GPIO_2_26 + MX28_PAD_SSP3_SCK__GPIO_2_24 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_a + &mmc2_cd_cfg + &mmc2_sck_cfg_a>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd1>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 13acdc7916b9..e350d57a4cec 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -11,220 +11,6 @@ model = "Aries/DENX M28EVK"; compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <8>; - wp-gpios = <&gpio3 10 0>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p80", "jedec,spi-nor"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_AUART2_CTS__GPIO_3_10 - MX28_PAD_AUART2_RTS__GPIO_3_11 - MX28_PAD_AUART3_RX__GPIO_3_12 - MX28_PAD_AUART3_TX__GPIO_3_13 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_m28: lcdif-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK - MX28_PAD_LCD_ENABLE__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_m28>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33260000>; - hactive = <800>; - vactive = <480>; - hback-porch = <0>; - hfront-porch = <256>; - vback-porch = <0>; - vfront-porch = <45>; - hsync-len = <1>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - status = "okay"; - }; - - can1: can@80034000 { - pinctrl-names = "default"; - pinctrl-0 = <&can1_pins_a>; - status = "okay"; - }; - }; - - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; - - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - eeprom: eeprom@51 { - compatible = "atmel,24c128"; - reg = <0x51>; - pagesize = <32>; - }; - }; - - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_pins_a>; - status = "okay"; - }; - - auart2: serial@8006e000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart2_2pins_b>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm4_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - vbus-supply = <®_usb0_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins_a>; - status = "okay"; - }; - - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - clocks = <&clks 57>, <&clks 57>; - clock-names = "ipg", "ahb"; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 4 5000000>; @@ -269,3 +55,209 @@ audio-codec = <&sgtl5000>; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; +}; + +&auart2 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_b>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; + + eeprom: eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <0>; + hfront-porch = <256>; + vback-porch = <0>; + vfront-porch = <45>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_AUART2_CTS__GPIO_3_10 + MX28_PAD_AUART2_RTS__GPIO_3_11 + MX28_PAD_AUART3_RX__GPIO_3_12 + MX28_PAD_AUART3_TX__GPIO_3_13 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_ENABLE__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio3 10 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80", "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_a>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 90928db0df70..5d74a68c56ff 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -15,111 +15,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog-gpios@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D00__GPIO_0_0 - MX28_PAD_GPMI_D03__GPIO_0_3 - MX28_PAD_GPMI_D06__GPIO_0_6 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "everspin,mr25h256", "mr25h256"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; - }; - - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - eeprom: eeprom@52 { - compatible = "atmel,24c64"; - reg = <0x52>; - pagesize = <32>; - }; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - vbus-supply = <®_usb0_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins_b>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -164,3 +59,99 @@ }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom: eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D06__GPIO_0_6 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256", "mr25h256"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_b>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts index 0d58da1c0cc5..ae6ed5c41be3 100644 --- a/arch/arm/boot/dts/imx28-ts4600.dts +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -18,50 +18,6 @@ reg = <0x40000000 0x10000000>; /* 256MB */ }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_sck_cfg - &en_sd_pwr>; - broken-cd; - bus-width = <4>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - pinctrl@80018000 { - - en_sd_pwr: en-sd-pwr@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_PWM3__GPIO_3_28 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - }; - }; - - apbx@80040000 { - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - }; - }; - reg_vddio_sd0: regulator-vddio-sd0 { compatible = "regulator-fixed"; regulator-name = "vddio-sd0"; @@ -72,3 +28,39 @@ }; }; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&pinctrl { + en_sd_pwr: en-sd-pwr@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_sck_cfg + &en_sd_pwr>; + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 096f246032c6..ffe58c7093e1 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2012 Shawn Guo <shawn.guo@linaro.org> * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts index e8325fd680d9..e6a4e2770640 100644 --- a/arch/arm/boot/dts/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -22,6 +22,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; i2c2-mux { @@ -191,6 +192,13 @@ status = "okay"; }; +&clks { + clocks = <&clock_ksz8081>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -208,10 +216,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clock_ksz8081>; - clock-names = "ipg", "ahb", "ptp"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts index 864dc5018451..33825b5a8f26 100644 --- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -28,6 +28,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_usb_h1_vbus: regulator-usb-h1-vbus { @@ -64,6 +65,13 @@ status = "okay"; }; +&clks { + clocks = <&rmii_clk>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&rmii_clk>; +}; + &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -297,11 +305,6 @@ phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&rmii_clk>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts index 6b6e6fcdea9c..fa823988312d 100644 --- a/arch/arm/boot/dts/imx6dl-lanmcu.dts +++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts @@ -21,6 +21,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; backlight: backlight { @@ -109,14 +110,17 @@ status = "okay"; }; +&clks { + clocks = <&clock_ksz8081>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clock_ksz8081>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts index c52e6caf3996..e98046eea7a4 100644 --- a/arch/arm/boot/dts/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -75,6 +75,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_5v0: regulator-5v0 { @@ -99,6 +100,13 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -116,10 +124,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts index 522660c912a0..e3c10483f33b 100644 --- a/arch/arm/boot/dts/imx6dl-plym2m.dts +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts @@ -84,6 +84,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_3v3: regulator-3v3 { @@ -173,6 +174,13 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -254,10 +262,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts index 1f8cddd83ccb..5f4fa796ca18 100644 --- a/arch/arm/boot/dts/imx6dl-prtmvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts @@ -193,6 +193,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_1v8: regulator-1v8 { @@ -293,8 +294,10 @@ }; &clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>; }; &ecspi1 { @@ -314,10 +317,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 72df1dba83be..23274be08e61 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -54,6 +54,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; rotary-encoder { @@ -134,6 +135,13 @@ }; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi2 { cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -182,10 +190,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index aacbf317feea..3be38a3c4bb1 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -98,7 +98,6 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; - status = "okay"; }; }; @@ -106,8 +105,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - phy-reset-duration = <20>; phy-supply = <&sw2_reg>; status = "okay"; @@ -131,6 +128,7 @@ switch@10 { compatible = "qca,qca8334"; reg = <10>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; switch_ports: ports { #address-cells = <1>; @@ -270,9 +268,9 @@ compatible = "ti,lp5562"; reg = <0x30>; clock-mode = /bits/ 8 <1>; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; led@0 { chan-name = "R"; @@ -303,7 +301,6 @@ compatible = "atmel,24c128"; reg = <0x57>; pagesize = <64>; - status = "okay"; }; touchscreen: touchscreen@5c { @@ -313,7 +310,7 @@ interrupt-parent = <&gpio4>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; - reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; touchscreen-size-x = <800>; touchscreen-size-y = <480>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts new file mode 100644 index 000000000000..5c2cd517589b --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Lynx i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; + +&backlight { + status = "okay"; +}; + +&lcd_display { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&panel { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchscreen { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts new file mode 100644 index 000000000000..e0292f11d03e --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Phoenix i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; + +&aliases { + /delete-property/ ethernet1; +}; + +&gpio_keys { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&switch_ports { + /delete-node/ port@2; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi new file mode 100644 index 000000000000..52a0f6ee426f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases: aliases { + ethernet1 = ð1; + ethernet2 = ð2; + mmc0 = &usdhc3; + mmc1 = &usdhc4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 32 64 128 255>; + default-brightness-level = <32>; + num-interpolated-steps = <8>; + power-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + status = "disabled"; + + button { + label = "Factory RESET"; + linux,code = <BTN_0>; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + compatible = "dataimage,scf0700c48ggu18"; + power-supply = <&sw2_reg>; + backlight = <&backlight>; + enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-supply = <&sw2_reg>; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + + switch_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <&fec>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + eth2: port@1 { + reg = <1>; + label = "eth2"; + phy-handle = <&phy_port1>; + }; + + eth1: port@2 { + reg = <2>; + label = "eth1"; + phy-handle = <&phy_port2>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: switchphy@11 { + reg = <0x11>; + }; + + phy_port2: switchphy@12 { + reg = <0x12>; + }; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze200"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vsnvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + leds: led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/ 8 <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + led@0 { + chan-name = "R"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + chan-name = "G"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + chan-name = "B"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + eeprom@57 { + compatible = "atmel,24c128"; + reg = <0x57>; + pagesize = <64>; + }; + + touchscreen: touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + reg = <0x5c>; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + status = "disabled"; + }; + + rtc: rtc@68 { + compatible = "dallas,ds1341"; + reg = <0x68>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; + + oled_1309: oled@3c { + compatible = "solomon,ssd1309fb-i2c"; + reg = <0x3c>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,segment-no-remap; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + oled_1305: oled@3d { + compatible = "solomon,ssd1305fb-i2c"; + reg = <0x3d>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,col-offset = <4>; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_oled: gpio@41 { + compatible = "nxp,pca9536"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x41>; + vcc-supply = <&sw2_reg>; + status = "disabled"; + }; + + touchkeys: keys@5a { + compatible = "fsl,mpr121-touchkey"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchkeys>; + reg = <0x5a>; + vdd-supply = <&sw2_reg>; + autorepeat; + linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, + <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, + <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; + poll-interval = <50>; + status = "disabled"; + }; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b0 + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 + >; + }; + + pinctrl_touchkeys: touchkeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b098 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbus { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbus { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + over-current-active-low; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + over-current-active-low; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; + status = "okay"; +}; + +&usbphy2 { + fsl,tx-d-cal = <109>; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts index 349959d38020..54a57a4548e2 100644 --- a/arch/arm/boot/dts/imx6q-prtwd2.dts +++ b/arch/arm/boot/dts/imx6q-prtwd2.dts @@ -22,6 +22,13 @@ reg = <0x80000000 0x20000000>; }; + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; + }; + usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -49,13 +56,17 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>; - clock-names = "ipg", "ahb"; status = "okay"; fixed-link { diff --git a/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts new file mode 100644 index 000000000000..ec6651ba4ba2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Pegasus i.MX6Quad board"; + compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_pu { + regulator-always-on; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi index 3def1b621c8e..2731faede1cb 100644 --- a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi +++ b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi @@ -105,6 +105,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_3v3: regulator-3v3 { @@ -232,13 +233,16 @@ }; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-mode = "rmii"; phy-supply = <®_3v3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 41e08fa23cce..b72ec745f6d1 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1049,8 +1049,8 @@ clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; + <&clks IMX6QDL_CLK_ENET_REF_SEL>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; fsl,stop-mode = <&gpr 0x34 27>; nvmem-cells = <&fec_mac_addr>; nvmem-cell-names = "mac-address"; diff --git a/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts new file mode 100644 index 000000000000..4a961a33bf2d --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Pegasus+ i.MX6QuadPlus board"; + compatible = "ysoft,imx6qp-yapp4-pegasus-plus", "fsl,imx6qp"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_pu { + regulator-always-on; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts index da1399057634..815119c12bd4 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts @@ -625,6 +625,7 @@ &usbotg1 { pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; disable-over-current; srp-disable; hnp-disable; diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/imx6sl-tolino-vision.dts new file mode 100644 index 000000000000..2694fe18a91b --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-tolino-vision.dts @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for the Tolino Vison ebook reader + * + * Name on mainboard is: 37NB-E60Q30+4A3 + * Serials start with: 6032 + * + * Copyright 2023 Andreas Kemnade + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sl.dtsi" + +/ { + model = "Tolino Vision"; + compatible = "kobo,tolino-vision", "fsl,imx6sl"; + + aliases { + mmc0 = &usdhc4; + mmc1 = &usdhc2; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ec 0 50000>; + power-supply = <&backlight_regulator>; + }; + + backlight_regulator: regulator-backlight { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_power>; + regulator-name = "backlight"; + gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-cover { + /* magnetic sensor in the corner next to the uSD slot */ + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + + key-fl { + label = "Frontlight"; + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BRIGHTNESS_CYCLE>; + }; + + key-power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + /* LED on home button */ + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* LED on power button */ + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; + }; + + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; + status = "okay"; + + touchscreen@15 { + compatible = "elan,ektf2132"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + power-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&gpio5 6 IRQ_TYPE_EDGE_FALLING>; + }; + + accelerometer@1d { + compatible = "fsl,mma8652"; + reg = <0x1d>; + }; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; + + ec: embedded-controller@43 { + compatible = "netronix,ntxec"; + reg = <0x43>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ec>; + interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + }; +}; + +&snvs_rtc { + /* + * We are using the RTC in the PMIC, but this one is not disabled + * in imx6sl.dtsi. + */ + status = "disabled"; +}; + +&uart1 { + /* J4 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + /* J9 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; + cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* removable uSD card */ +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; + + /* CyberTan WC121 (BCM43362) SDIO WiFi */ +}; + +&usdhc4 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc4>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + pinctrl-3 = <&pinctrl_usdhc4_sleep>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; + + /* internal eMMC */ +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&iomuxc { + pinctrl_backlight_power: backlight-powergrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 + >; + }; + + pinctrl_ec: ecgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x17000 + >; + }; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x110B0 + MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x110B0 + MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x11030 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1-sleepgrp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2-sleepgrp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059 + MX6SL_PAD_SD1_DAT7__GPIO5_IO10 0x17059 + MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29 0x17059 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x110B0 + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x1B0B1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6SL_PAD_SD2_DAT4__GPIO5_IO02 0x1b0b1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9 + MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9 + MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9 + MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1 + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1 + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1 + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x17059 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x13059 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x17059 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x17059 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x17059 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x17059 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x17059 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x17059 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x17059 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x17059 + MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x17068 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x170b9 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130b9 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x170b9 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x170b9 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x170b9 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x170b9 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x170b9 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x170b9 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x170b9 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x170f9 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130f9 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x170f9 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x170f9 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x170f9 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x170f9 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x170f9 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x170f9 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x170f9 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4_sleep: usdhc4-sleepgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x100c1 + MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x100c1 + MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x100c1 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x100c1 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x100c1 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x100c1 + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x100c1 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x100c1 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x100c1 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts index c18390f238e1..b7c96fbe7a91 100644 --- a/arch/arm/boot/dts/imx6ul-prti6g.dts +++ b/arch/arm/boot/dts/imx6ul-prti6g.dts @@ -26,6 +26,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet1_ref_pad"; }; leds { @@ -60,6 +61,13 @@ status = "okay"; }; +&clks { + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&clock_ksz8081_out>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "enet1_ref_pad"; + assigned-clocks = <&clks IMX6UL_CLK_ENET1_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081_out>; +}; + &ecspi1 { cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -85,12 +93,6 @@ pinctrl-0 = <&pinctrl_eth1>; phy-mode = "rmii"; phy-handle = <&rmii_phy>; - clocks = <&clks IMX6UL_CLK_ENET>, - <&clks IMX6UL_CLK_ENET_AHB>, - <&clks IMX6UL_CLK_ENET_PTP>, - <&clock_ksz8081_out>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f0a9139748b8..3d9d0f823568 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -531,10 +531,9 @@ clocks = <&clks IMX6UL_CLK_ENET>, <&clks IMX6UL_CLK_ENET_AHB>, <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET2_REF_125M>, - <&clks IMX6UL_CLK_ENET2_REF_125M>; + <&clks IMX6UL_CLK_ENET2_REF_SEL>; clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; + "enet_clk_ref"; fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 4>; @@ -879,10 +878,9 @@ clocks = <&clks IMX6UL_CLK_ENET>, <&clks IMX6UL_CLK_ENET_AHB>, <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET_REF>, - <&clks IMX6UL_CLK_ENET_REF>; + <&clks IMX6UL_CLK_ENET1_REF_SEL>; clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; + "enet_clk_ref"; fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 3>; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index bf64ba84b358..fde8a19aac0f 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -33,15 +33,9 @@ self-powered; type = "micro"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - usb_dr_connector: endpoint { - remote-endpoint = <&usb1_drd_sw>; - }; + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb1_drd_sw>; }; }; }; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi new file mode 100644 index 000000000000..3fdece5bd31f --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx6ull.dtsi" + +/ { + aliases { + mmc0 = &usdhc2; /* eMMC */ + }; + + chosen { + stdout-path = &uart4; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&pinctrl_emmc_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + }; + + reg_dcdc_3v3: regulator-dcdc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "dcdc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "ldo-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_status_leds>; + + led-1 { + function = LED_FUNCTION_BOOT; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + + led-2 { + function = LED_FUNCTION_PROGRAMMING; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_motor + &pinctrl_adc_cp + &pinctrl_adc_pp>; + vref-supply = <&vgen1_reg>; + status = "okay"; +}; + +&cpu0 { + clock-frequency = <792000000>; +}; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-cs = <3>; + cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH + &gpio3 2 GPIO_ACTIVE_HIGH + &gpio3 4 GPIO_ACTIVE_HIGH>; +}; + +&ecspi4 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + num-cs = <1>; + cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 + &pinctrl_enet1_phy_rst + &pinctrl_enet_mdio>; + phy-supply = <®_dcdc_3v3>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1_phy_int>; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + max-speed = <100>; + smsc,disable-energy-detect; + }; + }; +}; + +&gpio1 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "CP_INVERT", + "", + "", /* 15 */ + "", + "", + "", + "MOTOR_1_FAULT_N", + "", /* 20 */ + "", + "ROTARY_SWITCH_1_2_N", + "ROTARY_SWITCH_1_4_N", + "ROTARY_SWITCH_1_8_N", + "MOTOR_2_FAULT_N"; /* 25 */ +}; + +&gpio3 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "EXT_GPIO", + "MOTOR_1_DRIVER_IN1_N", + "MOTOR_1_DRIVER_IN2", + "MOTOR_2_DRIVER_IN1", + "STM32_BOOT0", /* 10 */ + "STM32_RST_N", + "RELAY_1_ENABLE", + "RELAY_2_ENABLE", + "", + "", /* 15 */ + "QCA700X_MAINS_BOOTLOADER_N", + "QCA700X_CP_RST_N", + "QCA700X_CP_BOOTLOADER_N", + "", + "DIGITAL_OUT_1", /* 20 */ + "DIGITAL_OUT_2", + "DIGITAL_OUT_3", + "DIGITAL_OUT_4", + "DIGITAL_OUT_5", + "DIGITAL_OUT_6", /* 25 */ + "ROTARY_SWITCH_2_8_N", + "ROTARY_SWITCH_2_4_N", + "ROTARY_SWITCH_2_2_N"; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "BOARD_VARIANT_1", + "BOARD_VARIANT_2", + "BOARD_VARIANT_0", /* 15 */ + "BOARD_VARIANT_3", + "", + "ROTARY_SWITCH_2_1_N", + "", + "DIGITAL_IN_5", /* 20 */ + "", + "", + "DIGITAL_IN_6", + "", + "DIGITAL_IN_1", /* 25 */ + "DIGITAL_IN_2", + "DIGITAL_IN_4", + "DIGITAL_IN_3"; + + pmic-int-hog { + gpio-hog; + gpios = <19 0>; + input; + }; +}; + +&gpio5 { + gpio-line-names = "ROTARY_SWITCH_1_1_N", /* 0 */ + "", + "RELAY_2_SENSE", + "RELAY_1_SENSE", + "", + "", /* 5 */ + "", + "QCA700X_MAINS_RST_N", + "MOTOR_2_DRIVER_IN2", + "", + "CP_POSITIVE_PEAK_RST", /* 10 */ + "CP_NEGATIVE_PEAK_RST"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pfuze3001: pmic@8 { + compatible = "fsl,pfuze3001"; + reg = <0x08>; + + regulators { + sw1_reg: sw1 { + regulator-name = "SW1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-name = "SW2"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-name = "SW3"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-name = "VSNVS"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-name = "VLDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-name = "VLDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-name = "VCCSD"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-name = "V33"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-name = "VLDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-name = "VLDO4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + onewire@18 { + compatible = "maxim,ds2484"; + reg = <0x18>; + }; + + accelerometer@19 { + compatible = "st,iis328dq", "st,h3lis331dl-accel"; + reg = <0x19>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>; + vdd-supply = <®_dcdc_3v3>; + vddio-supply = <®_dcdc_3v3>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_var + &pinctrl_digital_input + &pinctrl_digital_output + &pinctrl_gpio_motor + &pinctrl_hog_pins + &pinctrl_rotary_switch1 + &pinctrl_rotary_switch2>; + + pinctrl_adc_cp: adc-cpgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_adc_motor: adc-motorgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_adc_pp: adc-ppgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0xb0 + >; + }; + + pinctrl_board_var: board-vargrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__GPIO4_IO15 0xb0 + MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0xb0 + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0xb0 + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0 + >; + }; + + pinctrl_digital_input: digital-inputgrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0xb0 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0xb0 + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0xb0 + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0xb0 + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0xb0 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0xb0 + >; + }; + + pinctrl_digital_output: digital-outputgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x400000b0 + MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x400000b0 + MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x400000b0 + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x400000b0 + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x400000b0 + MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x400000b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10b0 + MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0xb0 + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0xb0 + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x10b0 + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x10b0 + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x10b0 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x10b0 + MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x10b0 + MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x10b0 + MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x10b0 + >; + }; + + pinctrl_emmc_rst: emmc-rstgrp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x400010b0 + >; + }; + + pinctrl_enet_mdio: enet-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10b0 + >; + }; + + pinctrl_enet1_phy_int: enet1-phy-intgrp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x10b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x100b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x100b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x400000b1 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0xb0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0xb0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0xb0 + >; + }; + + pinctrl_ext_uart: ext-uartgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0xb0 + MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0xb0 + >; + }; + + pinctrl_fan_enable: fan-enablegrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x400000b0 + >; + }; + + pinctrl_gpio_motor: gpio-motorgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x400000b0 + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x400000b0 + MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x400000b0 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0xb0 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0xb0 + >; + }; + + pinctrl_hog_pins: hog-pinsgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x400000b0 + MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x400000b0 + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x400070a0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x400000b0 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x400000b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x400008b0 + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x400008b0 + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x400008b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x400008b0 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x70b1 + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0xb0 + >; + }; + + pinctrl_pwm_cp: pinctrl-pwm-cpgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x60a0 + >; + }; + + pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0xb0 + >; + }; + + pinctrl_pwm_fan: pwm-fangrp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x60a0 + >; + }; + + pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x400000b0 + >; + }; + + pinctrl_qca700x_cp_int: qca700x-cp-intgrp { + fsl,pins = < + MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x10b0 + >; + }; + + pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x400000b0 + >; + }; + + pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x400000b0 + >; + }; + + pinctrl_rotary_switch1: rotary-switch1grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0xb0 + MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0xb0 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0xb0 + >; + }; + + pinctrl_rotary_switch2: rotary-switch2grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0xb0 + MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0xb0 + MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0xb0 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0xb0 + >; + }; + + pinctrl_rs485_1: rs485-1grp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0xb0 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0xb0 + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0xb0 + >; + }; + + pinctrl_rs485_2: rs485-2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x10b0 + MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x10b0 + MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x10b0 + >; + }; + + pinctrl_status_leds: status-ledsgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0xb0 + MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0xb0 + MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0xb0 + >; + }; + + pinctrl_stm32: stm32grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x10b0 + MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x10b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0xb0 + MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0xb0 + >; + }; + + pinctrl_usb: usbgrp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x70b0 + MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x70b0 + >; + }; + + pinctrl_usb_pwr: usb-pwrgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0xb0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x7071 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x7071 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x7071 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x7071 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x7071 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x7071 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x7071 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x7071 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x7071 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x7071 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x70b1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x70b1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x70b1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x70b1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x70b1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x70b1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x70b1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x70b1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x70b1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x70b1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x70f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x70f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x70f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x70f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x70f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x70f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x70f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x70f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x70f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x70f1 + >; + }; + + pinctrl_wdog2: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x10b0 + >; + }; +}; + +&iomuxc_snvs { + pinctrl-names = "default_snvs"; + pinctrl-0 = <&pinctrl_cp_peak_snvs + &pinctrl_gpio_motor_snvs + &pinctrl_relay_sense_snvs + &pinctrl_rotary_switch1_snvs>; + + pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x130a0 + >; + }; + + pinctrl_cp_peak_snvs: cp-peak-snvsgrp { + fsl,pins = < + MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x130a0 + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 + >; + }; + + pinctrl_enet1_phy_rst: enet1-phy-rstgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x100a0 + >; + }; + + pinctrl_fan_sense_snvs: fan-sense-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x100a0 + >; + }; + + pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 + >; + }; + + pinctrl_qca700x_mains_int: qca700x-mains-intgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x130a0 + >; + }; + + pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x400100a0 + >; + }; + + pinctrl_relay_sense_snvs: relay-sense-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x100a0 + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x100a0 + >; + }; + + pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x110a0 + >; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_digital_input_ref>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_cp>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rs485_1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + fsl,dte-mode; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rs485_2>; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stm32>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ext_uart>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb + &pinctrl_usb_pwr>; + dr_mode = "host"; + power-active-high; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-cal-45-dn-ohms = <35>; + fsl,tx-cal-45-dp-ohms = <35>; +}; + +&usbphy2 { + fsl,tx-cal-45-dn-ohms = <35>; + fsl,tx-cal-45-dp-ohms = <35>; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <&sw2_reg>; + vqmmc-supply = <®_1v8>; + mmc-pwrseq = <&emmc_pwrseq>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog2>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/imx6ull-tarragon-master.dts new file mode 100644 index 000000000000..67007ce383e3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-master.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Master"; + compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull"; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_sense_snvs>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + + reg_fan: regulator { + compatible = "regulator-fixed"; + regulator-name = "fan-supply"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_enable>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&ecspi4 { + status = "okay"; + + qca700x_mains: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_mains_int + &pinctrl_qca700x_mains_rst + &pinctrl_qca700x_mains_btld>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_fan>; + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts new file mode 100644 index 000000000000..e471c2005bee --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Micro"; + compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts new file mode 100644 index 000000000000..cee223b5f8e1 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Slave"; + compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull"; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts new file mode 100644 index 000000000000..7fd53b7a4372 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon SlaveXT"; + compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull"; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_sense_snvs>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + + reg_fan: regulator { + compatible = "regulator-fixed"; + regulator-name = "fan-supply"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_enable>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_fan>; + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index 8b2f11e85e05..92cb45dacda6 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "imx7d.dtsi" +#include <dt-bindings/input/linux-event-codes.h> / { model = "reMarkable 2.0"; @@ -69,6 +70,17 @@ startup-delay-us = <100000>; /* 100 ms */ }; + reg_touch: regulator-touch { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_TOUCH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_reg>; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -79,6 +91,10 @@ }; }; +&cpu0 { + cpu-supply = <&buck1>; +}; + &clks { assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, <&clks IMX7D_CLKO2_ROOT_DIV>; @@ -106,6 +122,193 @@ }; }; +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + bd71815: pmic@4b { + compatible = "rohm,bd71815"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bd71815>; + interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */ + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + clocks = <&clks IMX7D_CLKO2_ROOT_SRC>; + clock-output-names = "bd71815-32k-out"; + #clock-cells = <0>; + #gpio-cells = <2>; + + regulators { + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck3: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: buck5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6: ldodvref { + regulator-name = "ldodvref"; + regulator-boot-on; + regulator-always-on; + }; + + ldo7: ldolpsr { + regulator-name = "ldolpsr"; + regulator-boot-on; + regulator-always-on; + }; + + boost: wled { + regulator-name = "wled"; + regulator-min-microamp = <10>; + regulator-max-microamp = <25000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@24 { + compatible = "cypress,tt21000"; + reg = <0x24>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + touchscreen-size-x = <880>; + touchscreen-size-y = <1280>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + reg = <0>; + linux,keycodes = <KEY_HOMEPAGE>; + }; + + button@1 { + reg = <1>; + linux,keycodes = <KEY_MENU>; + }; + + button@2 { + reg = <2>; + linux,keycodes = <KEY_BACK>; + }; + + button@3 { + reg = <3>; + linux,keycodes = <KEY_SEARCH>; + }; + + button@4 { + reg = <4>; + linux,keycodes = <KEY_VOLUMEDOWN>; + }; + + button@5 { + reg = <5>; + linux,keycodes = <KEY_VOLUMEUP>; + }; + + button@6 { + reg = <6>; + linux,keycodes = <KEY_CAMERA>; + }; + + button@7 { + reg = <7>; + linux,keycodes = <KEY_POWER>; + }; + }; +}; + &i2c4 { clock-frequency = <100000>; pinctrl-names = "default", "sleep"; @@ -118,8 +321,6 @@ reg = <0x62>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_epdpmic>; - #address-cells = <1>; - #size-cells = <0>; #thermal-sensor-cells = <0>; epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; @@ -218,6 +419,12 @@ }; &iomuxc { + pinctrl_bd71815: bd71815grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x59 + >; + }; + pinctrl_brcm_reg: brcmreggrp { fsl,pins = < /* WIFI_PWR_EN */ @@ -232,6 +439,15 @@ >; }; + pinctrl_touch: touchgrp { + fsl,pins = < + /* CYTTSP interrupt */ + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54 + /* CYTTSP reset */ + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f @@ -239,6 +455,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f @@ -246,6 +476,13 @@ >; }; + pinctrl_touch_reg: touchreggrp { + fsl,pins = < + /* TOUCH_PWR_EN */ + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 7ceb7c09f7ad..4b94b8afb55d 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -165,6 +165,15 @@ reg = <0x306d0000 0x10000>; status = "disabled"; }; + + pxp: pxp@30700000 { + compatible = "fsl,imx7d-pxp"; + reg = <0x30700000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PXP_CLK>; + clock-names = "axi"; + }; }; &aips3 { diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts index bd4230d7dac9..765ab36e6f0c 100644 --- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts +++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts @@ -56,7 +56,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Coyote PCI boardfile. @@ -80,7 +80,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -102,7 +102,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts index 92b987bc3f99..6f5b4e4eb1cc 100644 --- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts +++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts @@ -112,7 +112,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Vulcan PCI boardfile. @@ -137,7 +137,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -159,7 +159,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts index 5ab09fb10dae..b9d46eb06507 100644 --- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts +++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts @@ -122,7 +122,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c) diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts index b740403b05a9..5a5e16cc7335 100644 --- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts +++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts @@ -159,7 +159,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Written based on the FSG-3 PCI boardfile. @@ -187,7 +187,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -209,7 +209,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts index b7cbc90e1c18..4d70f6afd13a 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts @@ -53,7 +53,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c) @@ -74,7 +74,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -91,7 +91,7 @@ }; ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts index a5943f51e8c2..97e3f25bb210 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts @@ -108,7 +108,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Avila PCI boardfile. @@ -142,7 +142,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -164,7 +164,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts index f80388b17a9e..9ec0169bacf8 100644 --- a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts +++ b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts @@ -82,7 +82,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * The device has 4 slots (IDSEL) with one dedicated IRQ per slot. @@ -148,7 +148,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 32>; phy-mode = "rgmii"; @@ -170,7 +170,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 33>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts index cbc87b344f6a..8da6823e1dbe 100644 --- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts +++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts @@ -109,7 +109,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from NAS 100D PCI boardfile (nas100d-pci.c) @@ -129,7 +129,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts index beaadda4685f..194945748dc3 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts @@ -40,7 +40,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -62,7 +62,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts index f17cab12a64b..7011fea6205b 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts @@ -61,7 +61,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from IXDPG425 PCI boardfile. @@ -95,7 +95,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -117,7 +117,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts index 0edc5928e00b..da1e93212b86 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -116,7 +116,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant @@ -143,7 +143,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts index 5e7e31b74b04..4aba9e0214a0 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts @@ -117,7 +117,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * We have up to 2 slots (IDSEL) with 2 swizzled IRQs. @@ -141,7 +141,7 @@ * Do we need a new binding and property for this? */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -165,7 +165,7 @@ /* EthC - connected to KS8995 switch port 5 */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts index df2ca6d95ee5..19d56e9aec9d 100644 --- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts +++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts @@ -54,7 +54,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c) @@ -77,7 +77,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts index b444003c10e1..c550c421b659 100644 --- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts +++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts @@ -79,7 +79,7 @@ /* LAN port */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts index cf4010d60187..1db849515f9e 100644 --- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -121,7 +121,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * In the boardfile for the Cambria from OpenWRT the interrupts @@ -167,7 +167,7 @@ }; ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; @@ -188,7 +188,7 @@ }; ethernet@c800c000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 2>; queue-txready = <&qmgr 19>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts index 3d7cfa1a5ed4..4703a8b24765 100644 --- a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts +++ b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts @@ -36,7 +36,7 @@ /* CHECKME: ethernet set-up taken from Gateworks Cambria */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; @@ -57,7 +57,7 @@ }; ethernet@c800c000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 2>; queue-txready = <&qmgr 19>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi index 146352ba848b..31c0a69771c4 100644 --- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi @@ -99,7 +99,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from IXDP425 PCI boardfile. diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 5d6d074011df..abd5aef8b87d 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -159,7 +159,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 88be868cf71e..3a87b7943c70 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -534,7 +534,7 @@ &dss { pinctrl-names = "default"; pinctrl-0 = <&vout_pins>; - status = "ok"; + status = "okay"; port { dpi_out: endpoint { diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index 4352397b4f52..1f762af6f502 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -183,7 +183,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index 1c880cf8fa91..3a69f65de81e 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -132,7 +132,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index f9f4b0143ba8..0c0851cd9bec 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -232,7 +232,7 @@ port@6 { reg = <6>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -251,6 +251,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts index 60c1e94f5dd3..9fd3581bb24b 100644 --- a/arch/arm/boot/dts/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/kirkwood-l-50.dts @@ -254,7 +254,6 @@ port@6 { reg = <6>; - label = "cpu"; phy-mode = "rgmii-id"; ethernet = <ð1port>; fixed-link { @@ -330,6 +329,7 @@ ethernet1-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index 2f9660f3b457..27fd6e2337d5 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -198,7 +198,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -221,6 +221,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index ced576acfb95..5a77286136c7 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -149,7 +149,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -166,6 +166,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index e21aa674945d..9d62f910cddf 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -105,7 +105,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 21eb59041a7d..4f22ab451aae 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -506,6 +506,15 @@ }; }; + sdxc_a_pins: sdxc-a { + mux { + groups = "sdxc_d0_a", "sdxc_d13_a", + "sdxc_clk_a", "sdxc_cmd_a"; + function = "sdxc_a"; + bias-pull-up; + }; + }; + sdxc_b_pins: sdxc-b { mux { groups = "sdxc_d0_b", "sdxc_d13_b", @@ -568,6 +577,14 @@ bias-disable; }; }; + + xtal_32k_out_pins: xtal-32k-out { + mux { + groups = "xtal_32k_out"; + function = "xtal"; + bias-disable; + }; + }; }; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index d5a3fe21e8e7..5979209fe91e 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -580,8 +580,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson8b-gpio-intc"; + compatible = "amlogic,meson8b-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index fa6d55f1cfb9..aa4d4bf70629 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -19,7 +19,6 @@ ethernet0 = ðmac; i2c0 = &i2c_AO; serial0 = &uart_AO; - serial1 = &uart_A; mmc0 = &sd_card_slot; }; @@ -45,12 +44,32 @@ }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + + pinctrl-0 = <&xtal_32k_out_pins>; + pinctrl-names = "default"; + + reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>, + <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>; + + clocks = <&xtal_32k_out>; + clock-names = "ext_clock"; + }; + vcc_3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + xtal_32k_out: xtal-32k-out-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k_out"; + }; }; &cpu0 { @@ -192,6 +211,27 @@ vref-supply = <&vddio_ao1v8>; }; +/* SDIO wifi */ +&sdhc { + status = "okay"; + + pinctrl-0 = <&sdxc_a_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + max-frequency = <50000000>; + + disable-wp; + non-removable; + cap-mmc-highspeed; + cap-sd-highspeed; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_3v3>; +}; + &sdio { status = "okay"; @@ -222,6 +262,12 @@ pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>; pinctrl-names = "default"; uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm20702a1"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + }; }; &uart_AO { diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 0a0fe8c5a405..ce6a4015fed5 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -359,7 +359,7 @@ mediatek,apmixedsys = <&apmixedsys>; }; - nandc: nfi@1100d000 { + nandc: nand-controller@1100d000 { compatible = "mediatek,mt2701-nfc"; reg = <0 0x1100d000 0 0x1000>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 5008115d2494..ece61a6a7a89 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -322,6 +322,12 @@ vqmmc-supply = <®_3p3v>; }; +&mt6323keys { + home { + status = "disabled"; + }; +}; + &mt6323_leds { status = "okay"; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index 1e96c865d41d..8adc0ef01f6c 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -14,7 +14,7 @@ * they probably share the same GPIO IRQ * REVISIT: Add timing support from slls644g.pdf */ - uart@3,0 { + serial@3,0 { compatible = "ns16550a"; reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ bank-width = <2>; @@ -50,7 +50,7 @@ gpmc,wr-data-mux-bus-ns = <45>; gpmc,wr-access-ns = <145>; }; - uart@3,1 { + serial@3,1 { compatible = "ns16550a"; reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ bank-width = <2>; @@ -61,7 +61,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,2 { + serial@3,2 { compatible = "ns16550a"; reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ bank-width = <2>; @@ -72,7 +72,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,3 { + serial@3,3 { compatible = "ns16550a"; reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ bank-width = <2>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 35eced6521ef..1a085bc01317 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 48e48b0c8190..e1b1a047f77a 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3730"; - compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 87e0ab1bbe95..4183fde46059 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -11,8 +11,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; - + compatible = "goldelico,gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -612,6 +611,22 @@ clock-frequency = <100000>; }; +&mcspi1 { + status = "disabled"; +}; + +&mcspi2 { + status = "disabled"; +}; + +&mcspi3 { + status = "disabled"; +}; + +&mcspi4 { + status = "disabled"; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 9dca5bfc87ab..eadb5b857f48 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index c6f863bc03ad..3f0197ceae09 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 8e9c12cf51a7..bc95a8df2e6a 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 5188f96f431e..d36ceecb7328 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index ecb4ef738e07..f6bbea2be54c 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -8,7 +8,7 @@ / { model = "INCOstartec LILLY-DBB056 (DM3730)"; - compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap3"; }; &twl { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index d211bcc31174..a3cf3f443785 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -12,7 +12,7 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap3"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index b2f480022ff6..cbaf79c4e842 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -12,7 +12,7 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap3"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index 7f04dfad8203..3eb935df04dc 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35"; - compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index bc5a04e03336..3af8d10d7224 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43"; - compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index 065c31cbf0e2..813e3c9fe3b6 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43"; - compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index e38c1c51392c..8405bd9262de 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; - compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index e6dc23159c4d..b9558d736e79 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43"; - compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index 587c08ce282d..fcfc449f2abe 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit"; - compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index f57de6010994..6d14466c180a 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -14,6 +14,6 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index 281af6c113be..bcf20ff3f281 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; - compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index ea509956d7ac..c0252f8a798a 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -16,7 +16,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index eb3893b9535e..4c36bde62491 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; - compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index b6879cdc5c13..0591af494184 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -9,7 +9,7 @@ / { model = "LG Optimus Black"; - compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index ce58b1f208e8..ab52e8d68f76 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -9,7 +9,7 @@ / { model = "TI Zoom3"; - compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts index 4f4888ec9138..fb203e7d37f5 100644 --- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts +++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts @@ -137,8 +137,12 @@ port@3 { reg = <3>; - label = "cpu"; ethernet = <ðport>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; port@5 { @@ -208,6 +212,7 @@ /* Hardwired to DSA switch */ speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts deleted file mode 100644 index c59e06ff2423..000000000000 --- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts +++ /dev/null @@ -1,115 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; -#include "ox810se.dtsi" - -/ { - model = "Western Digital My Book World Edition"; - - compatible = "wd,mbwe", "oxsemi,ox810se"; - - chosen { - bootargs = "console=ttyS1,115200n8 earlyprintk=serial"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x48000000 0x8000000>; - }; - - aliases { - serial1 = &uart1; - gpio0 = &gpio0; - gpio1 = &gpio1; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - power { - label = "power"; - gpios = <&gpio0 0 1>; - linux,code = <0x198>; - }; - - recovery { - label = "recovery"; - gpios = <&gpio0 4 1>; - linux,code = <0xab>; - }; - }; - - leds { - compatible = "gpio-leds"; - - a0 { - label = "activity0"; - gpios = <&gpio0 25 0>; - default-state = "keep"; - }; - - a1 { - label = "activity1"; - gpios = <&gpio0 26 0>; - default-state = "keep"; - }; - - a2 { - label = "activity2"; - gpios = <&gpio0 5 0>; - default-state = "keep"; - }; - - a3 { - label = "activity3"; - gpios = <&gpio0 6 0>; - default-state = "keep"; - }; - - a4 { - label = "activity4"; - gpios = <&gpio0 7 0>; - default-state = "keep"; - }; - - a5 { - label = "activity5"; - gpios = <&gpio1 2 0>; - default-state = "keep"; - }; - }; - - i2c-gpio { - compatible = "i2c-gpio"; - gpios = <&gpio0 3 0 /* sda */ - &gpio0 2 0 /* scl */ - >; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - - rtc0: rtc@48 { - compatible = "st,m41t00"; - reg = <0x68>; - }; - }; -}; - -ða { - status = "okay"; -}; - -&uart1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi deleted file mode 100644 index 96c0745f7b70..000000000000 --- a/arch/arm/boot/dts/ox810se.dtsi +++ /dev/null @@ -1,357 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/clock/oxsemi,ox810se.h> -#include <dt-bindings/reset/oxsemi,ox810se.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "oxsemi,ox810se"; - - cpus { - #address-cells = <0>; - #size-cells = <0>; - - cpu { - device_type = "cpu"; - compatible = "arm,arm926ej-s"; - clocks = <&armclk>; - }; - }; - - memory { - device_type = "memory"; - /* Max 256MB @ 0x48000000 */ - reg = <0x48000000 0x10000000>; - }; - - clocks { - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - rpsclk: rpsclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc>; - }; - - pll400: pll400 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <733333333>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&pll400>; - }; - - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll400>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - interrupt-parent = <&intc>; - - etha: ethernet@40400000 { - compatible = "oxsemi,ox810se-dwmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <8>; - interrupt-names = "macirq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk 6>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset 6>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - status = "disabled"; - }; - - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x44000000 0x1000000>; - - pinctrl: pinctrl { - compatible = "oxsemi,ox810se-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart0: uart0 { - uart0a { - pins = "gpio31"; - function = "fct3"; - }; - uart0b { - pins = "gpio32"; - function = "fct3"; - }; - }; - - pinctrl_uart0_modem: uart0_modem { - uart0c { - pins = "gpio27"; - function = "fct3"; - }; - uart0d { - pins = "gpio28"; - function = "fct3"; - }; - uart0e { - pins = "gpio29"; - function = "fct3"; - }; - uart0f { - pins = "gpio30"; - function = "fct3"; - }; - uart0g { - pins = "gpio33"; - function = "fct3"; - }; - uart0h { - pins = "gpio34"; - function = "fct3"; - }; - }; - - pinctrl_uart1: uart1 { - uart1a { - pins = "gpio20"; - function = "fct3"; - }; - uart1b { - pins = "gpio22"; - function = "fct3"; - }; - }; - - pinctrl_uart1_modem: uart1_modem { - uart1c { - pins = "gpio8"; - function = "fct3"; - }; - uart1d { - pins = "gpio9"; - function = "fct3"; - }; - uart1e { - pins = "gpio23"; - function = "fct3"; - }; - uart1f { - pins = "gpio24"; - function = "fct3"; - }; - uart1g { - pins = "gpio25"; - function = "fct3"; - }; - uart1h { - pins = "gpio26"; - function = "fct3"; - }; - }; - - pinctrl_uart2: uart2 { - uart2a { - pins = "gpio6"; - function = "fct3"; - }; - uart2b { - pins = "gpio7"; - function = "fct3"; - }; - }; - - pinctrl_uart2_modem: uart2_modem { - uart2c { - pins = "gpio0"; - function = "fct3"; - }; - uart2d { - pins = "gpio1"; - function = "fct3"; - }; - uart2e { - pins = "gpio2"; - function = "fct3"; - }; - uart2f { - pins = "gpio3"; - function = "fct3"; - }; - uart2g { - pins = "gpio4"; - function = "fct3"; - }; - uart2h { - pins = "gpio5"; - function = "fct3"; - }; - }; - }; - - gpio0: gpio@0 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x000000 0x100000>; - interrupts = <21>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <32>; - oxsemi,gpio-bank = <0>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - gpio1: gpio@100000 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x100000 0x100000>; - interrupts = <22>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <3>; - oxsemi,gpio-bank = <1>; - gpio-ranges = <&pinctrl 0 32 3>; - }; - - uart0: serial@200000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - clocks = <&sysclk>; - interrupts = <23>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART1>; - }; - - uart1: serial@300000 { - compatible = "ns16550a"; - reg = <0x300000 0x100000>; - clocks = <&sysclk>; - interrupts = <24>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART2>; - }; - - uart2: serial@900000 { - compatible = "ns16550a"; - reg = <0x900000 0x100000>; - clocks = <&sysclk>; - interrupts = <29>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART3>; - }; - - uart3: serial@a00000 { - compatible = "ns16550a"; - reg = <0xa00000 0x100000>; - clocks = <&sysclk>; - interrupts = <30>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART4>; - }; - }; - - apb-bridge@45000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x45000000 0x1000000>; - - sys: sys-ctrl@0 { - compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; - reg = <0x000000 0x100000>; - - reset: reset-controller { - compatible = "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; - - stdclk: stdclk { - compatible = "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; - }; - - rps@300000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x300000 0x100000>; - - intc: interrupt-controller@0 { - compatible = "oxsemi,ox810se-rps-irq"; - interrupt-controller; - reg = <0 0x200>; - #interrupt-cells = <1>; - valid-mask = <0xffffffff>; - clear-mask = <0xffffffff>; - }; - - timer0: timer@200 { - compatible = "oxsemi,ox810se-rps-timer"; - reg = <0x200 0x40>; - clocks = <&rpsclk>; - interrupts = <4 5>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts deleted file mode 100644 index c3daceccde55..000000000000 --- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts +++ /dev/null @@ -1,93 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; -#include "ox820.dtsi" - -/ { - model = "Cloud Engines PogoPlug Series 3"; - - compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; - - chosen { - bootargs = "earlyprintk"; - stdout-path = "serial0:115200n8"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x60000000 0x8000000>; - }; - - aliases { - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; - }; - - leds { - compatible = "gpio-leds"; - - blue { - label = "pogoplug:blue"; - gpios = <&gpio0 2 0>; - default-state = "keep"; - }; - - orange { - label = "pogoplug:orange"; - gpios = <&gpio1 16 1>; - default-state = "keep"; - }; - - green { - label = "pogoplug:green"; - gpios = <&gpio1 17 1>; - default-state = "keep"; - }; - }; -}; - -&uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&nandc { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - read-only; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -}; - -ða { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; -}; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi deleted file mode 100644 index dde4364892bf..000000000000 --- a/arch/arm/boot/dts/ox820.dtsi +++ /dev/null @@ -1,299 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/oxsemi,ox820.h> -#include <dt-bindings/reset/oxsemi,ox820.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "oxsemi,ox820"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "oxsemi,ox820-smp"; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,arm11mpcore"; - clocks = <&armclk>; - reg = <0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,arm11mpcore"; - clocks = <&armclk>; - reg = <1>; - }; - }; - - memory { - device_type = "memory"; - /* Max 512MB @ 0x60000000 */ - reg = <0x60000000 0x20000000>; - }; - - clocks { - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&osc>; - }; - - plla: plla { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <850000000>; - }; - - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&plla>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - interrupt-parent = <&gic>; - - nandc: nand-controller@41000000 { - compatible = "oxsemi,ox820-nand"; - reg = <0x41000000 0x100000>; - clocks = <&stdclk CLK_820_NAND>; - resets = <&reset RESET_NAND>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - etha: ethernet@40400000 { - compatible = "oxsemi,ox820-dwmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset RESET_MAC>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - status = "disabled"; - }; - - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x44000000 0x1000000>; - - pinctrl: pinctrl { - compatible = "oxsemi,ox820-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart0: uart0 { - uart0 { - pins = "gpio30", "gpio31"; - function = "fct5"; - }; - }; - - pinctrl_uart0_modem: uart0_modem { - uart0_modem_a { - pins = "gpio24", "gpio24", "gpio26", "gpio27"; - function = "fct4"; - }; - uart0_modem_b { - pins = "gpio28", "gpio29"; - function = "fct5"; - }; - }; - - pinctrl_uart1: uart1 { - uart1 { - pins = "gpio7", "gpio8"; - function = "fct4"; - }; - }; - - pinctrl_uart1_modem: uart1_modem { - uart1_modem { - pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43"; - function = "fct4"; - }; - }; - - pinctrl_etha_mdio: etha_mdio { - etha_mdio { - pins = "gpio3", "gpio4"; - function = "fct1"; - }; - }; - - pinctrl_nand: nand { - nand { - pins = "gpio12", "gpio13", "gpio14", "gpio15", - "gpio16", "gpio17", "gpio18", "gpio19", - "gpio20", "gpio21", "gpio22", "gpio23", - "gpio24"; - function = "fct1"; - }; - }; - }; - - gpio0: gpio@0 { - compatible = "oxsemi,ox820-gpio"; - reg = <0x000000 0x100000>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <32>; - oxsemi,gpio-bank = <0>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - gpio1: gpio@100000 { - compatible = "oxsemi,ox820-gpio"; - reg = <0x100000 0x100000>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <18>; - oxsemi,gpio-bank = <1>; - gpio-ranges = <&pinctrl 0 32 18>; - }; - - uart0: serial@200000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - clocks = <&sysclk>; - resets = <&reset RESET_UART1>; - }; - - uart1: serial@300000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - clocks = <&sysclk>; - resets = <&reset RESET_UART2>; - }; - - rps@400000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x400000 0x100000>; - - intc: interrupt-controller@0 { - compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq"; - interrupt-controller; - reg = <0 0x200>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - valid-mask = <0xffffffff>; - clear-mask = <0xffffffff>; - }; - - timer0: timer@200 { - compatible = "oxsemi,ox820-rps-timer"; - reg = <0x200 0x40>; - clocks = <&sysclk>; - interrupt-parent = <&intc>; - interrupts = <4>; - }; - }; - - sys: sys-ctrl@e00000 { - compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"; - reg = <0xe00000 0x200000>; - - reset: reset-controller { - compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; - - stdclk: stdclk { - compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; - }; - }; - - apb-bridge@47000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x47000000 0x1000000>; - - scu: scu@0 { - compatible = "arm,arm11mp-scu"; - reg = <0x0 0x100>; - }; - - local-timer@600 { - compatible = "arm,arm11mp-twd-timer"; - reg = <0x600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&armclk>; - }; - - gic: interrupt-controller@1000 { - compatible = "arm,arm11mp-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x1000 0x1000>, - <0x100 0x500>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts index de2fb1c01b6e..b82381229adf 100644 --- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts @@ -27,6 +27,16 @@ }; reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + + external_image_region: external-image@3100000 { + reg = <0x03100000 0x200000>; + no-map; + }; + adsp_region: adsp@3300000 { reg = <0x03300000 0x1400000>; no-map; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 92aa2b081901..672b246afbba 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -388,21 +388,37 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; acc2: clock-controller@20a8000 { compatible = "qcom,kpss-acc-v1"; reg = <0x020a8000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu2_aux"; + #clock-cells = <0>; }; acc3: clock-controller@20b8000 { compatible = "qcom,kpss-acc-v1"; reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu3_aux"; + #clock-cells = <0>; }; saw0: power-controller@2089000 { @@ -879,8 +895,11 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; }; rpm: rpm@108000 { @@ -1260,7 +1279,7 @@ gpu_opp_table: opp-table { compatible = "operating-points-v2"; - opp-320000000 { + opp-450000000 { opp-hz = /bits/ 64 <450000000>; }; @@ -1494,8 +1513,8 @@ num-lanes = <1>; #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, /* I/O */ - <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */ + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */ + <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index fabd7455eb8f..b653ea40c441 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -654,25 +654,25 @@ regulator; }; - acc0: clock-controller@f9088000 { + acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; - acc1: clock-controller@f9098000 { + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; - acc2: clock-controller@f90a8000 { + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; - acc3: clock-controller@f90b8000 { + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi index a5a6f3ebb274..d90b4f4c63af 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi @@ -8,6 +8,14 @@ model = "ALFA Network AP120C-AC"; compatible = "alfa-network,ap120c-ac", "qcom,ipq4018"; + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + keys { compatible = "gpio-keys"; @@ -68,7 +76,7 @@ }; }; - usb-power { + usb-power-hog { line-name = "USB-power"; gpios = <1 GPIO_ACTIVE_HIGH>; gpio-hog; @@ -162,6 +170,17 @@ label = "ART"; reg = <0x00170000 0x00010000>; read-only; + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; }; partition@180000 { @@ -178,7 +197,7 @@ }; }; - nand@1 { + flash@1 { compatible = "spi-nand"; reg = <1>; spi-max-frequency = <40000000>; @@ -225,10 +244,14 @@ &wifi0 { status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_1000>; }; &wifi1 { status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_5000>; qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 02e9ea78405d..dfcfb3339c23 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -143,7 +143,6 @@ sleep_clk: sleep_clk { compatible = "fixed-clock"; clock-frequency = <32000>; - clock-output-names = "gcc_sleep_clk_src"; #clock-cells = <0>; }; @@ -190,6 +189,8 @@ #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x1800000 0x60000>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; }; prng: rng@22000 { @@ -325,22 +326,22 @@ status = "disabled"; }; - acc0: clock-controller@b088000 { + acc0: power-manager@b088000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; }; - acc1: clock-controller@b098000 { + acc1: power-manager@b098000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; }; - acc2: clock-controller@b0a8000 { + acc2: power-manager@b0a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; }; - acc3: clock-controller@b0b8000 { + acc3: power-manager@b0b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; }; @@ -426,8 +427,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, - <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; + ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>, + <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts index f908889c4f95..4d509876294b 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -38,8 +38,6 @@ switch0: switch@10 { compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; dsa,member = <0 0>; @@ -67,26 +65,86 @@ port@1 { reg = <1>; label = "sw1"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@2 { reg = <2>; label = "sw2"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@3 { reg = <3>; label = "sw3"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@4 { reg = <4>; label = "sw4"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@5 { reg = <5>; label = "sw5"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; }; @@ -105,8 +163,6 @@ switch1: switch@14 { compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; dsa,member = <1 0>; @@ -134,26 +190,86 @@ port@1 { reg = <1>; label = "sw6"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@2 { reg = <2>; label = "sw7"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@3 { reg = <3>; label = "sw8"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@4 { reg = <4>; label = "sw9"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@5 { reg = <5>; label = "sw10"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 52d77e105957..af6764770fd1 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -569,16 +569,20 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon"; reg = <0x02011000 0x1000>; clocks = <&gcc PLL8_VOTE>, <&pxo_board>; clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu_l2_aux"; + #clock-cells = <0>; }; acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; saw0: regulator@2089000 { @@ -590,6 +594,10 @@ acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; saw1: regulator@2099000 { @@ -1081,8 +1089,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1132,8 +1140,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1183,8 +1191,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 8e9ea61a1e48..b40c52ddf9b4 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -116,7 +116,7 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon"; reg = <0x02011000 0x1000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index c373081bc21b..42acb9ddb8cc 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/clock/qcom,mmcc-msm8974.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> @@ -377,6 +378,11 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>; + clock-names = "xo", + "sleep_clk"; }; mmcc: clock-controller@fd8c0000 { diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 86f76d0feff4..f601b40ebcf4 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -473,7 +473,7 @@ }; l2cc: clock-controller@2082000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon"; reg = <0x02082000 0x1000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index a0369b38fe07..2a668cd535cc 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -182,8 +182,11 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; }; rpm: rpm@108000 { @@ -204,11 +207,19 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; saw0: regulator@2089000 { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 834ad95515b1..8208012684d4 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -418,22 +418,22 @@ regulator; }; - acc0: clock-controller@f9088000 { + acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; - acc1: clock-controller@f9098000 { + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; - acc2: clock-controller@f90a8000 { + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; - acc3: clock-controller@f90b8000 { + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; @@ -1057,7 +1057,7 @@ #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; - clocks = <&xo_board>, + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; clock-names = "xo", "sleep_clk"; diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts index d5343bb0daee..51058b065279 100644 --- a/arch/arm/boot/dts/qcom-sdx55-t55.dts +++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts @@ -242,6 +242,23 @@ status = "okay"; }; +&pcie_phy { + vdda-phy-supply = <&vreg_l1e_bb_1p2>; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + + status = "okay"; +}; + +&pcie_rc { + perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + &qpic_bam { status = "okay"; }; @@ -261,21 +278,48 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; +}; + +&tlmm { + pcie_default: pcie-default-state { + clkreq-pins { + pins = "gpio56"; + function = "pcie_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio57"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-pins { + pins = "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4e_bb_0p875>; vdda33-supply = <&vreg_l10e_3p1>; vdda18-supply = <&vreg_l5e_bb_1p7>; + + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4e_bb_0p875>; vdda-pll-supply = <&vreg_l1e_bb_1p2>; + + status = "okay"; }; &usb { diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts index ad74ecc2a196..8fadc6e70692 100644 --- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts @@ -242,19 +242,22 @@ status = "okay"; }; -&pcie0_phy { - status = "okay"; - +&pcie_phy { vdda-phy-supply = <&vreg_l1e_bb_1p2>; vdda-pll-supply = <&vreg_l4e_bb_0p875>; -}; -&pcie_ep { status = "okay"; +}; +&pcie_ep { pinctrl-names = "default"; pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default &pcie_ep_wake_default>; + + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + + status = "okay"; }; &qpic_bam { @@ -277,8 +280,8 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; }; &tlmm { @@ -305,16 +308,18 @@ }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4e_bb_0p875>; vdda33-supply = <&vreg_l10e_3p1>; vdda18-supply = <&vreg_l5e_bb_1p7>; + + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4e_bb_0p875>; vdda-pll-supply = <&vreg_l1e_bb_1p2>; + + status = "okay"; }; &usb { diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index df7303c5c843..342c3d14001e 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -304,7 +304,135 @@ status = "disabled"; }; - pcie0_phy: phy@1c07000 { + pcie_rc: pcie@1c00000 { + compatible = "qcom,pcie-sdx55"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40100000 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "msi8"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_PIPE_CLK>, + <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep"; + + assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommu-map = <0x0 &apps_smmu 0x0200 0x1>, + <0x100 &apps_smmu 0x0201 0x1>, + <0x200 &apps_smmu 0x0202 0x1>, + <0x300 &apps_smmu 0x0203 0x1>, + <0x400 &apps_smmu 0x0204 0x1>; + + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_GDSC>; + + phys = <&pcie_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie_ep: pcie-ep@1c00000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40200000 0x100000>, + <0x01c03000 0x3000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "addr_space", + "mmio"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep", + "ref"; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", + "doorbell"; + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie_lane>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + + status = "disabled"; + }; + + pcie_phy: phy@1c07000 { compatible = "qcom,sdx55-qmp-pcie-phy"; reg = <0x01c07000 0x1c4>; #address-cells = <1>; @@ -314,7 +442,10 @@ <&gcc GCC_PCIE_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, <&gcc GCC_PCIE_RCHNG_PHY_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen"; resets = <&gcc GCC_PCIE_PHY_BCR>; reset-names = "phy"; @@ -324,7 +455,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06000 { + pcie_lane: lanes@1c06000 { reg = <0x01c06000 0x104>, /* tx0 */ <0x01c06200 0x328>, /* rx0 */ <0x01c07200 0x1e8>, /* pcs */ @@ -385,7 +516,7 @@ }; tcsr: syscon@1fcb000 { - compatible = "syscon"; + compatible = "qcom,sdx55-tcsr", "syscon"; reg = <0x01fc0000 0x1000>; }; @@ -401,45 +532,6 @@ status = "disabled"; }; - pcie_ep: pcie-ep@40000000 { - compatible = "qcom,sdx55-pcie-ep"; - reg = <0x01c00000 0x3000>, - <0x40000000 0xf1d>, - <0x40000f20 0xc8>, - <0x40001000 0x1000>, - <0x40200000 0x100000>, - <0x01c03000 0x3000>; - reg-names = "parf", "dbi", "elbi", "atu", "addr_space", - "mmio"; - - qcom,perst-regs = <&tcsr 0xb258 0xb270>; - - clocks = <&gcc GCC_PCIE_AUX_CLK>, - <&gcc GCC_PCIE_CFG_AHB_CLK>, - <&gcc GCC_PCIE_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_SLV_AXI_CLK>, - <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_SLEEP_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>; - clock-names = "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", "sleep", "ref"; - - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global", "doorbell"; - reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; - resets = <&gcc GCC_PCIE_BCR>; - reset-names = "core"; - power-domains = <&gcc PCIE_GDSC>; - phys = <&pcie0_lane>; - phy-names = "pciephy"; - max-link-speed = <3>; - num-lanes = <2>; - - status = "disabled"; - }; - remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sdx55-mpss-pas"; reg = <0x04080000 0x4040>; diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index ed98c83c141f..57bc3b03d3aa 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -245,6 +245,11 @@ status = "okay"; }; +&ipa { + qcom,gsi-loader = "skip"; + status = "okay"; +}; + &qpic_bam { status = "okay"; }; @@ -265,8 +270,8 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; }; &usb { @@ -278,14 +283,14 @@ }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4b_0p88>; vdda33-supply = <&vreg_l10b_3p08>; vdda18-supply = <&vreg_l5b_1p8>; + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4b_0p88>; vdda-pll-supply = <&vreg_l1b_1p2>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 192f9f94bc8b..525dd8a1f664 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/interconnect/qcom,sdx65.h> / { #address-cells = <1>; @@ -223,16 +224,15 @@ "qcom,usb-snps-hs-7nm-phy"; reg = <0xff4000 0x120>; #phy-cells = <0>; - status = "disabled"; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "ref"; resets = <&gcc GCC_QUSB2PHY_BCR>; + status = "disabled"; }; usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx65-qmp-usb3-uni-phy"; reg = <0x00ff6000 0x1c8>; - status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -246,6 +246,8 @@ <&gcc GCC_USB3_PHY_BCR>; reset-names = "phy", "common"; + status = "disabled"; + usb_ssphy: phy@ff6200 { reg = <0x00ff6e00 0x160>, <0x00ff7000 0x1ec>, @@ -299,6 +301,44 @@ #hwlock-cells = <1>; }; + ipa: ipa@3f40000 { + compatible = "qcom,sdx65-ipa"; + + reg = <0x03f40000 0x10000>, + <0x03f50000 0x5000>, + <0x03e04000 0xfc000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + iommus = <&apps_smmu 0x5e0 0x0>, + <&apps_smmu 0x5e2 0x0>; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>, + <&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>; + interconnect-names = "memory", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sdx55-mpss-pas"; reg = <0x04080000 0x4040>; @@ -355,7 +395,6 @@ usb: usb@a6f8800 { compatible = "qcom,sdx65-dwc3", "qcom,dwc3"; reg = <0x0a6f8800 0x400>; - status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -385,6 +424,8 @@ resets = <&gcc GCC_USB30_BCR>; + status = "disabled"; + usb_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0x0a600000 0xcd00>; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 0af63ddc4473..fa09295052c6 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -196,6 +196,19 @@ &i2c0 { status = "okay"; + + wm8978: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; + + eeprom@50 { + compatible = "st,24c01", "atmel,24c01"; + reg = <0x50>; + pagesize = <16>; + }; + touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; @@ -205,12 +218,6 @@ pinctrl-names = "default"; gpios = <&pfc 166 GPIO_ACTIVE_LOW>; }; - - wm8978: codec@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8978"; - reg = <0x1a>; - }; }; &i2c2 { diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 5f05f2b44a48..fd40890bd77b 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "r8a7779.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -66,6 +67,51 @@ vdd33a-supply = <&fixedregulator3v3>; }; + keyboard-irq { + compatible = "gpio-keys"; + + pinctrl-0 = <&keyboard_irq_pins>; + pinctrl-names = "default"; + + interrupt-parent = <&gpio0>; + + key-1 { + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_1>; + label = "SW1-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_2>; + label = "SW1-2"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + keyboard-gpio { + compatible = "gpio-keys-polled"; + poll-interval = <50>; + + pinctrl-0 = <&keyboard_gpio_pins>; + pinctrl-names = "default"; + + key-3 { + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW1-3"; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW1-4"; + debounce-interval = <20>; + }; + }; + leds { compatible = "gpio-leds"; led2 { @@ -161,6 +207,20 @@ }; }; +&gpio0 { + keyboard-irq-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>; + input; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <100000>; +}; + &irqpin0 { status = "okay"; }; @@ -223,6 +283,15 @@ groups = "hspi0"; function = "hspi0"; }; + + keyboard_irq_pins: keyboard-irq { + pins = "GP_0_17", "GP_0_18"; + bias-pull-up; + }; + keyboard_gpio_pins: keyboard-gpio { + pins = "GP_0_19", "GP_0_20"; + bias-pull-up; + }; }; &sata { diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 39fc58f32df6..97b767d81d92 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -324,6 +324,69 @@ status = "disabled"; }; + pwm0: pwm@ffe50000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe50000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@ffe51000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe51000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@ffe52000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe52000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@ffe53000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe53000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@ffe54000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe54000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@ffe55000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe55000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@ffe56000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe56000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + pfc: pinctrl@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; @@ -554,7 +617,8 @@ compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xffc80030 4>; - clocks = <&cpg_clocks R8A7779_CLK_S>, + clocks = <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, @@ -572,20 +636,21 @@ <&cpg_clocks R8A7779_CLK_P>; #clock-cells = <1>; clock-indices = < - R8A7779_CLK_HSPI R8A7779_CLK_TMU2 - R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 - R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 - R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 - R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 - R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0 - R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 - R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 + R8A7779_CLK_PWM R8A7779_CLK_HSPI + R8A7779_CLK_TMU2 R8A7779_CLK_TMU1 + R8A7779_CLK_TMU0 R8A7779_CLK_HSCIF1 + R8A7779_CLK_HSCIF0 R8A7779_CLK_SCIF5 + R8A7779_CLK_SCIF4 R8A7779_CLK_SCIF3 + R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1 + R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3 + R8A7779_CLK_I2C2 R8A7779_CLK_I2C1 + R8A7779_CLK_I2C0 >; clock-output-names = - "hspi", "tmu2", "tmu1", "tmu0", "hscif1", - "hscif0", "scif5", "scif4", "scif3", "scif2", - "scif1", "scif0", "i2c3", "i2c2", "i2c1", - "i2c0"; + "pwm", "hspi", "tmu2", "tmu1", "tmu0", + "hscif1", "hscif0", "scif5", "scif4", "scif3", + "scif2", "scif1", "scif0", "i2c3", "i2c2", + "i2c1", "i2c0"; }; mstp1_clks: clocks@ffc80034 { compatible = "renesas,r8a7779-mstp-clocks", diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 2f2e483a2c2a..46fb81f5062f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -376,6 +376,17 @@ reg = <0 0xe6060000 0 0x250>; }; + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7790", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7790-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1037,6 +1048,76 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + can0: can@e6e80000 { compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index 27fb06ce907e..8b58773e592e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -5,6 +5,12 @@ * Copyright 2015 Google, Inc */ +/ { + aliases { + mmc1 = &sdmmc; + }; +}; + &io_domains { sdcard-supply = <&vccio_sd>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index e406c8c7c7e5..d838bf0d5d9a 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -10,6 +10,10 @@ #include "rk3288.dtsi" / { + aliases { + mmc0 = &emmc; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 2ca76b69add7..cb9cdaddffd4 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -942,7 +942,7 @@ status = "disabled"; }; - spdif: sound@ff88b0000 { + spdif: sound@ff8b0000 { compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; reg = <0x0 0xff8b0000 0x0 0x10000>; #sound-dai-cells = <0>; @@ -1114,7 +1114,7 @@ status = "disabled"; }; - mipi_dsi: mipi@ff960000 { + mipi_dsi: dsi@ff960000 { compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff960000 0x0 0x4000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -1125,18 +1125,28 @@ status = "disabled"; ports { - mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; + mipi_in_vopb: endpoint@0 { reg = <0>; remote-endpoint = <&vopb_out_mipi>; }; + mipi_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_mipi>; }; }; + + mipi_out: port@1 { + reg = <1>; + }; }; }; @@ -1157,7 +1167,6 @@ lvds_in: port@0 { reg = <0>; - #address-cells = <1>; #size-cells = <0>; @@ -1165,11 +1174,16 @@ reg = <0>; remote-endpoint = <&vopb_out_lvds>; }; + lvds_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_lvds>; }; }; + + lvds_out: port@1 { + reg = <1>; + }; }; }; @@ -1190,19 +1204,26 @@ ports { #address-cells = <1>; #size-cells = <0>; + edp_in: port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; + edp_in_vopb: endpoint@0 { reg = <0>; remote-endpoint = <&vopb_out_edp>; }; + edp_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_edp>; }; }; + + edp_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 12e90a1cc6a1..1a9e4a96b2ff 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -566,7 +566,7 @@ interrupts = <29>; clocks = <&clocks CLK_CSIS>, <&clocks SCLK_CSIS>; - clock-names = "clk_csis", + clock-names = "csis", "sclk_csis"; bus-width = <4>; status = "disabled"; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 8142c017882c..4d741adc16cd 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -210,8 +210,8 @@ * As we're dealing with 3wire SPI, we only define SCK * and MOSI (in the spec MOSI is called "SDA"). */ - gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; num-chipselects = <1>; diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 4523c63475e4..3bb812d6399e 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -447,6 +447,36 @@ slew-rate = <2>; }; }; + + can1_pins_a: can1-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can2_pins_a: can2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can2_pins_b: can2-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index c31ceb821231..c9e05e3540d6 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -362,6 +362,35 @@ status = "disabled"; }; + can1: can@40006400 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40006400 0x200>; + interrupts = <19>, <20>, <21>, <22>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F4_APB1_RESET(CAN1)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>; + st,can-primary; + st,gcan = <&gcan>; + status = "disabled"; + }; + + gcan: gcan@40006600 { + compatible = "st,stm32f4-gcan", "syscon"; + reg = <0x40006600 0x200>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>; + }; + + can2: can@40006800 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40006800 0x200>; + interrupts = <63>, <64>, <65>, <66>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F4_APB1_RESET(CAN2)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN2)>; + st,gcan = <&gcan>; + status = "disabled"; + }; + dac: dac@40007400 { compatible = "st,stm32f4-dac-core"; reg = <0x40007400 0x400>; diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi index b2dce3a29f39..27e0c3826789 100644 --- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -258,4 +258,133 @@ bias-disable; }; }; + + uart4_idle_pins_a: uart4-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_sleep_pins_a: uart4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */ + }; + }; + + uart8_pins_a: uart8-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */ + bias-pull-up; + }; + }; + + uart8_idle_pins_a: uart8-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */ + bias-pull-up; + }; + }; + + uart8_sleep_pins_a: uart8-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */ + <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */ + }; + }; + + usart1_pins_a: usart1-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */ + <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */ + <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */ + bias-pull-up; + }; + }; + + usart1_idle_pins_a: usart1-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('A', 7, ANALOG)>; /* USART1_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */ + bias-pull-up; + }; + }; + + usart1_sleep_pins_a: usart1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('C', 2, ANALOG)>, /* USART1_RTS */ + <STM32_PINMUX('A', 7, ANALOG)>, /* USART1_CTS_NSS */ + <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */ + }; + }; + + usart2_pins_a: usart2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */ + <STM32_PINMUX('E', 11, AF2)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_idle_pins_a: usart2-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index 5949473cbbfd..d163c267e34c 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -397,12 +397,42 @@ status = "disabled"; }; + usart3: serial@4000f000 { + compatible = "st,stm32h7-uart"; + reg = <0x4000f000 0x400>; + interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART3_K>; + resets = <&rcc USART3_R>; + wakeup-source; + dmas = <&dmamux1 45 0x400 0x5>, + <&dmamux1 46 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART4_K>; resets = <&rcc UART4_R>; + wakeup-source; + dmas = <&dmamux1 63 0x400 0x5>, + <&dmamux1 64 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@40011000 { + compatible = "st,stm32h7-uart"; + reg = <0x40011000 0x400>; + interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART5_K>; + resets = <&rcc UART5_R>; + wakeup-source; + dmas = <&dmamux1 65 0x400 0x5>, + <&dmamux1 66 0x400 0x1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -442,6 +472,32 @@ status = "disabled"; }; + uart7: serial@40018000 { + compatible = "st,stm32h7-uart"; + reg = <0x40018000 0x400>; + interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART7_K>; + resets = <&rcc UART7_R>; + wakeup-source; + dmas = <&dmamux1 79 0x400 0x5>, + <&dmamux1 80 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart8: serial@40019000 { + compatible = "st,stm32h7-uart"; + reg = <0x40019000 0x400>; + interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART8_K>; + resets = <&rcc UART8_R>; + wakeup-source; + dmas = <&dmamux1 81 0x400 0x5>, + <&dmamux1 82 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + timers1: timer@44000000 { #address-cells = <1>; #size-cells = <0>; @@ -524,6 +580,19 @@ }; }; + usart6: serial@44003000 { + compatible = "st,stm32h7-uart"; + reg = <0x44003000 0x400>; + interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART6_K>; + resets = <&rcc USART6_R>; + wakeup-source; + dmas = <&dmamux1 71 0x400 0x5>, + <&dmamux1 72 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2s1: audio-controller@44004000 { compatible = "st,stm32h7-i2s"; reg = <0x44004000 0x400>; @@ -748,6 +817,32 @@ status = "disabled"; }; + usart1: serial@4c000000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c000000 0x400>; + interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART1_K>; + resets = <&rcc USART1_R>; + wakeup-source; + dmas = <&dmamux1 41 0x400 0x5>, + <&dmamux1 42 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usart2: serial@4c001000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c001000 0x400>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; + resets = <&rcc USART2_R>; + wakeup-source; + dmas = <&dmamux1 43 0x400 0x5>, + <&dmamux1 44 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2s4: audio-controller@4c002000 { compatible = "st,stm32h7-i2s"; reg = <0x4c002000 0x400>; @@ -1137,6 +1232,54 @@ dma-requests = <48>; }; + fmc: memory-controller@58002000 { + compatible = "st,stm32mp1-fmc2-ebi"; + reg = <0x58002000 0x1000>; + ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ + <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ + <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ + <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ + <4 0 0x80000000 0x10000000>; /* NAND */ + #address-cells = <2>; + #size-cells = <1>; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + status = "disabled"; + + nand-controller@4,0 { + compatible = "st,stm32mp1-fmc2-nfc"; + reg = <4 0x00000000 0x1000>, + <4 0x08010000 0x1000>, + <4 0x08020000 0x1000>, + <4 0x01000000 0x1000>, + <4 0x09010000 0x1000>, + <4 0x09020000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>, + <&mdma 24 0x2 0x12000a08 0x0 0x0>, + <&mdma 25 0x2 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + status = "disabled"; + }; + }; + + qspi: spi@58003000 { + compatible = "st,stm32f469-qspi"; + reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; + reg-names = "qspi", "qspi_mm"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>, + <&mdma 26 0x2 0x10100008 0x0 0x0>; + dma-names = "tx", "rx"; + clocks = <&rcc QSPI_K>; + resets = <&rcc QSPI_R>; + status = "disabled"; + }; + sdmmc1: mmc@58005000 { compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x20253180>; diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index c40686cb2b9a..f0900ca672b5 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -19,6 +19,13 @@ aliases { serial0 = &uart4; + serial1 = &usart1; + serial2 = &uart8; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; memory@c0000000 { @@ -267,8 +274,41 @@ }; &uart4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart8_pins_a>; + pinctrl-1 = <&uart8_sleep_pins_a>; + pinctrl-2 = <&uart8_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; +}; + +&usart1 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_a>; + pinctrl-1 = <&usart1_sleep_pins_a>; + pinctrl-2 = <&usart1_idle_pins_a>; + uart-has-rtscts; + status = "disabled"; +}; + +/* Bluetooth */ +&usart2 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_sleep_pins_a>; + pinctrl-2 = <&usart2_idle_pins_a>; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index a9d2bec99014..e86d989dd351 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1880,6 +1880,21 @@ }; }; + spi1_pins_b: spi1-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; + spi2_pins_a: spi2-0 { pins1 { pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */ @@ -2163,7 +2178,7 @@ <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <0>; }; pins2 { pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */ @@ -2181,7 +2196,7 @@ pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <0>; }; pins3 { pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ @@ -2448,19 +2463,4 @@ bias-disable; }; }; - - spi1_pins_b: spi1-1 { - pins1 { - pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ - <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - - pins2 { - pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ - bias-disable; - }; - }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 4c8be9c8eb20..0da3667ab1e0 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -17,9 +17,6 @@ aliases { ethernet0 = ðernet0; - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart7; }; chosen { diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 2bc92ef3aeb9..ab13e340f4ef 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -18,9 +18,6 @@ aliases { ethernet0 = ðernet0; - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart7; serial3 = &usart2; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index b1eb688a278a..8beb901be506 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -16,6 +16,10 @@ model = "STMicroelectronics STM32MP157C eval daughter"; compatible = "st,stm32mp157c-ed1", "st,stm32mp157"; + aliases { + serial0 = &uart4; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -65,15 +69,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@e8000000 { - reg = <0xe8000000 0x8000000>; - no-map; - }; - }; - - aliases { - serial0 = &uart4; }; sd_switch: regulator-sd_switch { @@ -140,10 +135,6 @@ status = "okay"; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index 7d11c50b9e40..b01470a9a3d5 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -68,11 +68,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@dc000000 { - reg = <0xdc000000 0x4000000>; - no-map; - }; }; led: gpio_leds { @@ -183,10 +178,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 542226cfcfdf..ba8e9d9a42fa 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -14,16 +14,15 @@ model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157"; - chosen { - stdout-path = "serial0:115200n8"; - }; - aliases { - serial0 = &uart4; serial1 = &usart3; ethernet0 = ðernet0; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + clocks { clk_ext_camera: clk-ext-camera { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index cb00ce7cec8b..407ed3952f75 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -73,7 +73,7 @@ }; panel: panel { - compatible = "edt,etm0700g0edh6", "simple-panel"; + compatible = "edt,etm0700g0edh6"; backlight = <&backlight>; enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>; power-supply = <®_3v3>; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi index 2d9461006810..e22871dc580c 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi @@ -62,11 +62,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; }; led { @@ -80,11 +75,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; - status = "okay"; -}; - &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 11370ae0d868..cefeeb00fc22 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -8,6 +8,12 @@ #include <dt-bindings/mfd/st,stpmic1.h> / { + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart7; + }; + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x20000000>; @@ -53,11 +59,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; }; led { @@ -151,10 +152,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi index 935b7084b5a2..a43965c86fe8 100644 --- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi @@ -210,8 +210,8 @@ &m4_rproc { memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; + mbox-names = "vq0", "vq1", "shutdown", "detach"; interrupt-parent = <&exti>; interrupts = <68 1>; status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 6cdadba6a3ac..5cce4918f84c 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -822,7 +822,7 @@ clocks = <&ccu CLK_APB2_UART0>; resets = <&ccu RST_APB2_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -835,7 +835,7 @@ clocks = <&ccu CLK_APB2_UART1>; resets = <&ccu RST_APB2_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -848,7 +848,7 @@ clocks = <&ccu CLK_APB2_UART2>; resets = <&ccu RST_APB2_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -861,7 +861,7 @@ clocks = <&ccu CLK_APB2_UART3>; resets = <&ccu RST_APB2_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -874,7 +874,7 @@ clocks = <&ccu CLK_APB2_UART4>; resets = <&ccu RST_APB2_UART4>; dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -887,7 +887,7 @@ clocks = <&ccu CLK_APB2_UART5>; resets = <&ccu RST_APB2_UART5>; dmas = <&dma 22>, <&dma 22>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index f630ab55bb6a..4aa9d88c9ea3 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -490,7 +490,7 @@ clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -503,7 +503,7 @@ clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -516,7 +516,7 @@ clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -529,7 +529,7 @@ clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -542,7 +542,7 @@ clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts new file mode 100644 index 000000000000..94e24b5926dd --- /dev/null +++ b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. + +#include <dt-bindings/interrupt-controller/irq.h> + +/dts-v1/; + +#include "sun8i-t113s.dtsi" +#include "sunxi-d1s-t113-mangopi-mq-r.dtsi" + +/ { + model = "MangoPi MQ-R-T113"; + compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s"; + + aliases { + ethernet0 = &rtl8189ftv; + }; +}; + +&cpu0 { + cpu-supply = <®_vcc_core>; +}; + +&cpu1 { + cpu-supply = <®_vcc_core>; +}; + +&mmc1 { + rtl8189ftv: wifi@1 { + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */ + interrupt-names = "host-wake"; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-t113s.dtsi b/arch/arm/boot/dts/sun8i-t113s.dtsi new file mode 100644 index 000000000000..804aa197a24f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-t113s.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. + +#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <riscv/allwinner/sunxi-d1s-t113.dtsi> +#include <riscv/allwinner/sunxi-d1-t113.dtsi> + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + }; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index db194c606fdc..b001251644f7 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -479,7 +479,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -492,7 +492,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -505,7 +505,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART2>; pinctrl-0 = <&uart2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts index 04e59b8381cb..43896723a994 100644 --- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "suniv-f1c100s.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Lichee Pi Nano"; compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; @@ -50,8 +52,22 @@ }; }; +&otg_sram { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pe_pins>; status = "okay"; }; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 9455d27e516e..3c61d59ab5f8 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -133,6 +133,32 @@ #size-cells = <0>; }; + usb_otg: usb@1c13000 { + compatible = "allwinner,suniv-f1c100s-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <26>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + allwinner,sram = <&otg_sram 1>; + status = "disabled"; + }; + + usbphy: phy@1c13400 { + compatible = "allwinner,suniv-f1c100s-usb-phy"; + reg = <0x01c13400 0x10>; + reg-names = "phy_ctrl"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + #phy-cells = <1>; + status = "disabled"; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; @@ -181,6 +207,12 @@ pins = "PE0", "PE1"; function = "uart0"; }; + + /omit-if-no-ref/ + uart1_pa_pins: uart1-pa-pins { + pins = "PA2", "PA3"; + function = "uart1"; + }; }; i2c0: i2c@1c27000 { diff --git a/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts new file mode 100644 index 000000000000..2d2a3f026df3 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Arm Ltd, + * based on work: + * Copyright 2022 Icenowy Zheng <uwu@icenowy.me> + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Lctech Pi F1C200s"; + compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s", + "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pa_pins>; + status = "okay"; +}; + +/* + * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected + * to Vin, which supplies the board. Host mode works (if the board is powered + * otherwise), but peripheral is probably the intention. + */ +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts new file mode 100644 index 000000000000..184c245041a6 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Icenowy Zheng <uwu@icenowy.me> + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Popcorn Computer PopStick v1.1"; + compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick", + "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */ + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */ + bus-width = <4>; + disable-wp; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pe_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi new file mode 100644 index 000000000000..e9bc749488bb --- /dev/null +++ b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. +/* + * Common peripherals and configurations for MangoPi MQ-R boards. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */ + }; + }; + + /* board wide 5V supply directly from the USB-C socket */ + reg_vcc5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + /* SY8008 DC/DC regulator on the board */ + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v>; + }; + + /* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */ + reg_vcc_core: regulator-core { + compatible = "regulator-fixed"; + regulator-name = "vcc-core"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + vin-supply = <®_vcc5v>; + }; + + /* XC6206 LDO on the board */ + reg_avdd2v8: regulator-avdd { + compatible = "regulator-fixed"; + regulator-name = "avdd2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_3v3>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */ + }; +}; + +&dcxo { + clock-frequency = <24000000>; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_3v3>; + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_3v3>; + vcc-pd-supply = <®_3v3>; + vcc-pe-supply = <®_avdd2v8>; + vcc-pf-supply = <®_3v3>; + vcc-pg-supply = <®_3v3>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pb_pins>; + status = "okay"; +}; + +/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */ +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 686193bd6bd9..ade1cd50e445 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -710,7 +710,7 @@ clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -723,7 +723,7 @@ clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -736,7 +736,7 @@ clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -749,7 +749,7 @@ clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts index 7b2969656ec9..c2a9c3fb5b33 100644 --- a/arch/arm/boot/dts/tegra20-asus-tf101.dts +++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts @@ -520,10 +520,10 @@ micdet-delay = <100>; gpio-cfg = < - 0xffffffff /* don't touch */ - 0xffffffff /* don't touch */ + 0x00000600 /* DMIC_LR, output */ + 0x00000680 /* DMIC_DAT, input */ 0x00000000 /* Speaker-enable GPIO, output, low */ - 0x00000400 /* Mic bias current detect */ + 0xffffffff /* don't touch */ 0xffffffff /* don't touch */ >; @@ -577,9 +577,9 @@ vdd-supply = <&vdd_1v8_sys>; vddio-supply = <&vdd_1v8_sys>; - mount-matrix = "1", "0", "0", - "0", "1", "0", - "0", "0", "1"; + mount-matrix = "-1", "0", "0", + "0", "-1", "0", + "0", "0", "-1"; }; }; }; @@ -1184,15 +1184,16 @@ "Int Spk", "RON", "Int Spk", "LOP", "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1L", "Mic Jack"; + "IN2L", "Mic Jack", + "DMICDAT", "Int Mic"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - nvidia,headset; + nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>; + nvidia,coupled-mic-hp-det; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra30-asus-tf201.dts b/arch/arm/boot/dts/tegra30-asus-tf201.dts index 3c2b9e93e028..0406c5a69c12 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf201.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf201.dts @@ -624,4 +624,21 @@ /delete-node/ opp-800000000-1300; /delete-node/ opp-900000000-1350; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf201", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Prime TF201 RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf300t.dts b/arch/arm/boot/dts/tegra30-asus-tf300t.dts index 506ae3626731..970a1f08dc8c 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf300t.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf300t.dts @@ -128,8 +128,8 @@ micdet-delay = <100>; gpio-cfg = < - 0xffffffff /* don't touch */ - 0xffffffff /* don't touch */ + 0x00000600 /* DMIC_LR, output */ + 0x00000680 /* DMIC_DAT, input */ 0x00000000 /* Speaker-enable GPIO, output, low */ 0xffffffff /* don't touch */ 0xffffffff /* don't touch */ @@ -1023,12 +1023,10 @@ "Int Spk", "RON", "Int Spk", "LOP", "Int Spk", "LON", - "IN1L", "Mic Jack", "IN2L", "Mic Jack", "DMICDAT", "Int Mic"; nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; - nvidia,headset; }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts index 573deeafb7ba..4861db8e1e59 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts @@ -1084,4 +1084,21 @@ /delete-node/ opp-800000000; /delete-node/ opp-900000000; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf300tg", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Pad TF300TG RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/tegra30-asus-tf700t.dts index e7fe8c7a7435..efde7dad718a 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf700t.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf700t.dts @@ -820,4 +820,21 @@ enable-active-high; vin-supply = <&vdd_3v3_sys>; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf700t", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Infinity TF700T RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi index 1861b2de2dc3..bdb898ad6262 100644 --- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi @@ -558,7 +558,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - spi2_cs1_n_pw2 { + hp_detect { nvidia,pins = "spi2_cs1_n_pw2"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -566,10 +566,10 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - spi2_sck_px2 { + mic_detect { nvidia,pins = "spi2_sck_px2"; nvidia,function = "spi2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -1674,7 +1674,8 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - nvidia,hp-mute-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>; + nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>; + nvidia,coupled-mic-hp-det; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi index d100a1a8b705..a2d557155114 100644 --- a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi @@ -210,6 +210,20 @@ opp-suspend; }; + opp-266500000-1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; + }; + + opp-266500000-1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; + }; + opp-333500000-1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <333500000>; @@ -424,6 +438,12 @@ opp-suspend; }; + opp-266500000 { + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <2132000>; + }; + opp-333500000 { opp-hz = /bits/ 64 <333500000>; opp-supported-hw = <0x000F>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index b6fcac6016e0..9cba67b54111 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -1283,10 +1283,7 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&{/cpus/cpu@0}>, - <&{/cpus/cpu@1}>, - <&{/cpus/cpu@2}>, - <&{/cpus/cpu@3}>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; thermal-zones { diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index da30a4d4f35c..309b74783468 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -494,7 +494,7 @@ static int locomo_probe(struct platform_device *dev) return __locomo_probe(&dev->dev, mem, irq); } -static int locomo_remove(struct platform_device *dev) +static void locomo_remove(struct platform_device *dev) { struct locomo *lchip = platform_get_drvdata(dev); @@ -502,8 +502,6 @@ static int locomo_remove(struct platform_device *dev) __locomo_remove(lchip); platform_set_drvdata(dev, NULL); } - - return 0; } /* @@ -514,7 +512,7 @@ static int locomo_remove(struct platform_device *dev) */ static struct platform_driver locomo_device_driver = { .probe = locomo_probe, - .remove = locomo_remove, + .remove_new = locomo_remove, #ifdef CONFIG_PM .suspend = locomo_suspend, .resume = locomo_resume, diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index f5e6990b8856..aad6ba236f0f 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -1123,7 +1123,7 @@ static int sa1111_probe(struct platform_device *pdev) return __sa1111_probe(&pdev->dev, mem, irq); } -static int sa1111_remove(struct platform_device *pdev) +static void sa1111_remove(struct platform_device *pdev) { struct sa1111 *sachip = platform_get_drvdata(pdev); @@ -1135,8 +1135,6 @@ static int sa1111_remove(struct platform_device *pdev) __sa1111_remove(sachip); platform_set_drvdata(pdev, NULL); } - - return 0; } static struct dev_pm_ops sa1111_pm_ops = { @@ -1155,7 +1153,7 @@ static struct dev_pm_ops sa1111_pm_ops = { */ static struct platform_driver sa1111_device_driver = { .probe = sa1111_probe, - .remove = sa1111_remove, + .remove_new = sa1111_remove, .driver = { .name = "sa1111", .pm = &sa1111_pm_ops, diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index e74c5bfdc6d3..9018c7240166 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -236,7 +236,7 @@ err_ioremap: return ret; } -static int scoop_remove(struct platform_device *pdev) +static void scoop_remove(struct platform_device *pdev) { struct scoop_dev *sdev = platform_get_drvdata(pdev); @@ -246,13 +246,11 @@ static int scoop_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); iounmap(sdev->base); kfree(sdev); - - return 0; } static struct platform_driver scoop_driver = { .probe = scoop_probe, - .remove = scoop_remove, + .remove_new = scoop_remove, .suspend = scoop_suspend, .resume = scoop_resume, .driver = { diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 711a79e9be00..c9a602aee715 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -160,7 +160,7 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_DMA=y -CONFIG_IMX_SDMA=y +CONFIG_IMX_SDMA=m # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_FSL_MX25_ADC=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 6dc6fed12af8..62f2b8972160 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -76,7 +76,7 @@ CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y CONFIG_PCI=y CONFIG_PCI_MSI=y -CONFIG_PCI_IMX6=y +CONFIG_PCI_IMX6_HOST=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set @@ -128,6 +128,7 @@ CONFIG_CS89x0_PLATFORM=y # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MICROCHIP is not set # CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_QCA7000_SPI=m # CONFIG_NET_VENDOR_SEEQ is not set CONFIG_SMC91X=y CONFIG_SMC911X=y @@ -213,8 +214,12 @@ CONFIG_GPIO_SIOX=m CONFIG_GPIO_MAX732X=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y +CONFIG_GPIO_BD71815=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_74X164=y +CONFIG_W1=m +CONFIG_W1_MASTER_DS2482=m +CONFIG_W1_SLAVE_THERM=m CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y @@ -223,6 +228,7 @@ CONFIG_RN5T618_POWER=m CONFIG_SENSORS_MC13783_ADC=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_SENSORS_IIO_HWMON=y +CONFIG_SENSORS_PWM_FAN=y CONFIG_SENSORS_SY7636A=y CONFIG_THERMAL_STATISTICS=y CONFIG_THERMAL_WRITABLE_TRIPS=y @@ -242,8 +248,10 @@ CONFIG_MFD_MC13XXX_I2C=y CONFIG_MFD_SY7636A=y CONFIG_MFD_RN5T618=y CONFIG_MFD_STMPE=y +CONFIG_MFD_ROHM_BD71828=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_BD71815=y CONFIG_REGULATOR_DA9052=y CONFIG_REGULATOR_DA9062=y CONFIG_REGULATOR_DA9063=y @@ -271,6 +279,7 @@ CONFIG_VIDEO_OV5645=m CONFIG_VIDEO_ADV7180=m CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y +CONFIG_DRM_I2C_NXP_TDA998X=y CONFIG_DRM_MSM=y CONFIG_DRM_PANEL_LVDS=y CONFIG_DRM_PANEL_SIMPLE=y @@ -380,6 +389,7 @@ CONFIG_RTC_DRV_ISL1208=y CONFIG_RTC_DRV_PCF8523=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_M41T80=y +CONFIG_RTC_DRV_BD70528=y CONFIG_RTC_DRV_RC5T619=y CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_DA9063=y @@ -396,6 +406,7 @@ CONFIG_STAGING=y CONFIG_STAGING_MEDIA=y CONFIG_VIDEO_IMX_MEDIA=y CONFIG_COMMON_CLK_PWM=y +CONFIG_COMMON_CLK_BD718XX=y CONFIG_CLK_IMX8MM=y CONFIG_CLK_IMX8MN=y CONFIG_CLK_IMX8MP=y @@ -403,6 +414,7 @@ CONFIG_CLK_IMX8MQ=y CONFIG_SOC_IMX8M=y CONFIG_EXTCON_USB_GPIO=y CONFIG_IIO=y +CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_MMA8452=y CONFIG_IMX7D_ADC=y CONFIG_RN5T618_ADC=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 084cc612ea23..871fffe92187 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -251,6 +251,7 @@ CONFIG_B53_SPI_DRIVER=m CONFIG_B53_MDIO_DRIVER=m CONFIG_B53_MMAP_DRIVER=m CONFIG_NET_DSA_BCM_SF2=m +CONFIG_NET_DSA_RZN1_A5PSW=m CONFIG_SUN4I_EMAC=y CONFIG_SPI_AX88796C=m CONFIG_BCMGENET=m @@ -474,6 +475,7 @@ CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y CONFIG_PINCTRL_RZA2=y +CONFIG_PINCTRL_RZN1=y CONFIG_GPIO_ASPEED_SGPIO=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y @@ -563,6 +565,7 @@ CONFIG_MESON_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_RENESAS_WDT=m CONFIG_RENESAS_RZAWDT=m +CONFIG_RENESAS_RZN1WDT=m CONFIG_STPMIC1_WATCHDOG=y CONFIG_PM8916_WATCHDOG=m CONFIG_BCM47XX_WDT=y @@ -873,6 +876,7 @@ CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m +CONFIG_USB_RENESAS_USBF=m CONFIG_USB_ASPEED_VHUB=m CONFIG_USB_CONFIGFS=m CONFIG_USB_CONFIGFS_SERIAL=y @@ -989,6 +993,7 @@ CONFIG_RTC_DRV_SH=m CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_AT91RM9200=m CONFIG_RTC_DRV_AT91SAM9=m +CONFIG_RTC_DRV_RZN1=m CONFIG_RTC_DRV_VT8500=y CONFIG_RTC_DRV_SUNXI=y CONFIG_RTC_DRV_MV=y @@ -1020,6 +1025,7 @@ CONFIG_UNIPHIER_MDMAC=y CONFIG_XILINX_DMA=y CONFIG_QCOM_BAM_DMA=y CONFIG_DW_DMAC=y +CONFIG_RZN1_DMAMUX=m CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=m CONFIG_VIRTIO_PCI=y @@ -1212,6 +1218,8 @@ CONFIG_FSI_MASTER_ASPEED=m CONFIG_FSI_SCOM=m CONFIG_FSI_SBEFIFO=m CONFIG_FSI_OCC=m +CONFIG_TEE=y +CONFIG_OPTEE=y CONFIG_INTERCONNECT_QCOM=y CONFIG_INTERCONNECT_QCOM_MSM8916=y CONFIG_COUNTER=m diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig deleted file mode 100644 index 70a67b3fc91b..000000000000 --- a/arch/arm/configs/oxnas_v6_defconfig +++ /dev/null @@ -1,92 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_CGROUPS=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_ARCH_MULTI_V6=y -CONFIG_ARCH_OXNAS=y -CONFIG_MACH_OX820=y -CONFIG_SMP=y -CONFIG_NR_CPUS=16 -CONFIG_ARCH_FORCE_MAX_ORDER=12 -CONFIG_SECCOMP=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_KEXEC=y -CONFIG_EFI=y -CONFIG_CPU_IDLE=y -CONFIG_ARM_CPUIDLE=y -CONFIG_VFP=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_CMDLINE_PARTITION=y -CONFIG_CMA=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_OXNAS=y -CONFIG_MTD_UBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_NETDEVICES=y -CONFIG_STMMAC_ETH=y -CONFIG_REALTEK_PHY=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_CLASS_FLASH=m -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_ARM_TIMER_SP804=y -CONFIG_EXT4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_UBIFS_FS=y -CONFIG_PSTORE=y -CONFIG_PSTORE_CONSOLE=y -CONFIG_PSTORE_PMSG=y -CONFIG_PSTORE_RAM=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=64 -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 751d939fcb76..0b21c0a47582 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -76,6 +76,7 @@ CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_16550A_VARIANTS is not set CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set +# CONFIG_SERIAL_8250_PCI1XXXX is not set CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_8250_EM=y # CONFIG_SERIAL_8250_PERICOM is not set @@ -168,6 +169,7 @@ CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_USB_RENESAS_USBF=y CONFIG_USB_ETH=y CONFIG_MMC=y CONFIG_MMC_SDHI=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 3bdc217667a6..0f55815eecb3 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -38,6 +38,10 @@ CONFIG_CFG80211_DEBUGFS=y CONFIG_MAC80211=y CONFIG_MAC80211_LEDS=y CONFIG_CAIF=y +CONFIG_NFC=m +CONFIG_NFC_HCI=m +CONFIG_NFC_SHDLC=m +CONFIG_NFC_PN544_I2C=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_GNSS=y @@ -180,10 +184,8 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_CRYPTO_DEV_UX500=y -CONFIG_CRYPTO_DEV_UX500_CRYP=y -CONFIG_CRYPTO_DEV_UX500_HASH=y -CONFIG_CRYPTO_DEV_UX500_DEBUG=y +CONFIG_CRYPTO_DEV_STM32_HASH=y +CONFIG_CRYPTO_DEV_STM32_CRYP=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index ac3fd7523698..96ad442089bd 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -1,5 +1,7 @@ # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ_FULL=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -42,6 +44,7 @@ CONFIG_NET_9P_VIRTIO=y CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -137,5 +140,4 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DETECT_HUNG_TASK=y -# CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_USER=y diff --git a/arch/arm/include/asm/arm_pmuv3.h b/arch/arm/include/asm/arm_pmuv3.h new file mode 100644 index 000000000000..78d3d4b82c6c --- /dev/null +++ b/arch/arm/include/asm/arm_pmuv3.h @@ -0,0 +1,247 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2012 ARM Ltd. + */ + +#ifndef __ASM_PMUV3_H +#define __ASM_PMUV3_H + +#include <asm/cp15.h> +#include <asm/cputype.h> + +#define PMCCNTR __ACCESS_CP15_64(0, c9) + +#define PMCR __ACCESS_CP15(c9, 0, c12, 0) +#define PMCNTENSET __ACCESS_CP15(c9, 0, c12, 1) +#define PMCNTENCLR __ACCESS_CP15(c9, 0, c12, 2) +#define PMOVSR __ACCESS_CP15(c9, 0, c12, 3) +#define PMSELR __ACCESS_CP15(c9, 0, c12, 5) +#define PMCEID0 __ACCESS_CP15(c9, 0, c12, 6) +#define PMCEID1 __ACCESS_CP15(c9, 0, c12, 7) +#define PMXEVTYPER __ACCESS_CP15(c9, 0, c13, 1) +#define PMXEVCNTR __ACCESS_CP15(c9, 0, c13, 2) +#define PMUSERENR __ACCESS_CP15(c9, 0, c14, 0) +#define PMINTENSET __ACCESS_CP15(c9, 0, c14, 1) +#define PMINTENCLR __ACCESS_CP15(c9, 0, c14, 2) +#define PMMIR __ACCESS_CP15(c9, 0, c14, 6) +#define PMCCFILTR __ACCESS_CP15(c14, 0, c15, 7) + +#define PMEVCNTR0 __ACCESS_CP15(c14, 0, c8, 0) +#define PMEVCNTR1 __ACCESS_CP15(c14, 0, c8, 1) +#define PMEVCNTR2 __ACCESS_CP15(c14, 0, c8, 2) +#define PMEVCNTR3 __ACCESS_CP15(c14, 0, c8, 3) +#define PMEVCNTR4 __ACCESS_CP15(c14, 0, c8, 4) +#define PMEVCNTR5 __ACCESS_CP15(c14, 0, c8, 5) +#define PMEVCNTR6 __ACCESS_CP15(c14, 0, c8, 6) +#define PMEVCNTR7 __ACCESS_CP15(c14, 0, c8, 7) +#define PMEVCNTR8 __ACCESS_CP15(c14, 0, c9, 0) +#define PMEVCNTR9 __ACCESS_CP15(c14, 0, c9, 1) +#define PMEVCNTR10 __ACCESS_CP15(c14, 0, c9, 2) +#define PMEVCNTR11 __ACCESS_CP15(c14, 0, c9, 3) +#define PMEVCNTR12 __ACCESS_CP15(c14, 0, c9, 4) +#define PMEVCNTR13 __ACCESS_CP15(c14, 0, c9, 5) +#define PMEVCNTR14 __ACCESS_CP15(c14, 0, c9, 6) +#define PMEVCNTR15 __ACCESS_CP15(c14, 0, c9, 7) +#define PMEVCNTR16 __ACCESS_CP15(c14, 0, c10, 0) +#define PMEVCNTR17 __ACCESS_CP15(c14, 0, c10, 1) +#define PMEVCNTR18 __ACCESS_CP15(c14, 0, c10, 2) +#define PMEVCNTR19 __ACCESS_CP15(c14, 0, c10, 3) +#define PMEVCNTR20 __ACCESS_CP15(c14, 0, c10, 4) +#define PMEVCNTR21 __ACCESS_CP15(c14, 0, c10, 5) +#define PMEVCNTR22 __ACCESS_CP15(c14, 0, c10, 6) +#define PMEVCNTR23 __ACCESS_CP15(c14, 0, c10, 7) +#define PMEVCNTR24 __ACCESS_CP15(c14, 0, c11, 0) +#define PMEVCNTR25 __ACCESS_CP15(c14, 0, c11, 1) +#define PMEVCNTR26 __ACCESS_CP15(c14, 0, c11, 2) +#define PMEVCNTR27 __ACCESS_CP15(c14, 0, c11, 3) +#define PMEVCNTR28 __ACCESS_CP15(c14, 0, c11, 4) +#define PMEVCNTR29 __ACCESS_CP15(c14, 0, c11, 5) +#define PMEVCNTR30 __ACCESS_CP15(c14, 0, c11, 6) + +#define PMEVTYPER0 __ACCESS_CP15(c14, 0, c12, 0) +#define PMEVTYPER1 __ACCESS_CP15(c14, 0, c12, 1) +#define PMEVTYPER2 __ACCESS_CP15(c14, 0, c12, 2) +#define PMEVTYPER3 __ACCESS_CP15(c14, 0, c12, 3) +#define PMEVTYPER4 __ACCESS_CP15(c14, 0, c12, 4) +#define PMEVTYPER5 __ACCESS_CP15(c14, 0, c12, 5) +#define PMEVTYPER6 __ACCESS_CP15(c14, 0, c12, 6) +#define PMEVTYPER7 __ACCESS_CP15(c14, 0, c12, 7) +#define PMEVTYPER8 __ACCESS_CP15(c14, 0, c13, 0) +#define PMEVTYPER9 __ACCESS_CP15(c14, 0, c13, 1) +#define PMEVTYPER10 __ACCESS_CP15(c14, 0, c13, 2) +#define PMEVTYPER11 __ACCESS_CP15(c14, 0, c13, 3) +#define PMEVTYPER12 __ACCESS_CP15(c14, 0, c13, 4) +#define PMEVTYPER13 __ACCESS_CP15(c14, 0, c13, 5) +#define PMEVTYPER14 __ACCESS_CP15(c14, 0, c13, 6) +#define PMEVTYPER15 __ACCESS_CP15(c14, 0, c13, 7) +#define PMEVTYPER16 __ACCESS_CP15(c14, 0, c14, 0) +#define PMEVTYPER17 __ACCESS_CP15(c14, 0, c14, 1) +#define PMEVTYPER18 __ACCESS_CP15(c14, 0, c14, 2) +#define PMEVTYPER19 __ACCESS_CP15(c14, 0, c14, 3) +#define PMEVTYPER20 __ACCESS_CP15(c14, 0, c14, 4) +#define PMEVTYPER21 __ACCESS_CP15(c14, 0, c14, 5) +#define PMEVTYPER22 __ACCESS_CP15(c14, 0, c14, 6) +#define PMEVTYPER23 __ACCESS_CP15(c14, 0, c14, 7) +#define PMEVTYPER24 __ACCESS_CP15(c14, 0, c15, 0) +#define PMEVTYPER25 __ACCESS_CP15(c14, 0, c15, 1) +#define PMEVTYPER26 __ACCESS_CP15(c14, 0, c15, 2) +#define PMEVTYPER27 __ACCESS_CP15(c14, 0, c15, 3) +#define PMEVTYPER28 __ACCESS_CP15(c14, 0, c15, 4) +#define PMEVTYPER29 __ACCESS_CP15(c14, 0, c15, 5) +#define PMEVTYPER30 __ACCESS_CP15(c14, 0, c15, 6) + +#define RETURN_READ_PMEVCNTRN(n) \ + return read_sysreg(PMEVCNTR##n) +static unsigned long read_pmevcntrn(int n) +{ + PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN); + return 0; +} + +#define WRITE_PMEVCNTRN(n) \ + write_sysreg(val, PMEVCNTR##n) +static void write_pmevcntrn(int n, unsigned long val) +{ + PMEVN_SWITCH(n, WRITE_PMEVCNTRN); +} + +#define WRITE_PMEVTYPERN(n) \ + write_sysreg(val, PMEVTYPER##n) +static void write_pmevtypern(int n, unsigned long val) +{ + PMEVN_SWITCH(n, WRITE_PMEVTYPERN); +} + +static inline unsigned long read_pmmir(void) +{ + return read_sysreg(PMMIR); +} + +static inline u32 read_pmuver(void) +{ + /* PMUVers is not a signed field */ + u32 dfr0 = read_cpuid_ext(CPUID_EXT_DFR0); + + return (dfr0 >> 24) & 0xf; +} + +static inline void write_pmcr(u32 val) +{ + write_sysreg(val, PMCR); +} + +static inline u32 read_pmcr(void) +{ + return read_sysreg(PMCR); +} + +static inline void write_pmselr(u32 val) +{ + write_sysreg(val, PMSELR); +} + +static inline void write_pmccntr(u64 val) +{ + write_sysreg(val, PMCCNTR); +} + +static inline u64 read_pmccntr(void) +{ + return read_sysreg(PMCCNTR); +} + +static inline void write_pmxevcntr(u32 val) +{ + write_sysreg(val, PMXEVCNTR); +} + +static inline u32 read_pmxevcntr(void) +{ + return read_sysreg(PMXEVCNTR); +} + +static inline void write_pmxevtyper(u32 val) +{ + write_sysreg(val, PMXEVTYPER); +} + +static inline void write_pmcntenset(u32 val) +{ + write_sysreg(val, PMCNTENSET); +} + +static inline void write_pmcntenclr(u32 val) +{ + write_sysreg(val, PMCNTENCLR); +} + +static inline void write_pmintenset(u32 val) +{ + write_sysreg(val, PMINTENSET); +} + +static inline void write_pmintenclr(u32 val) +{ + write_sysreg(val, PMINTENCLR); +} + +static inline void write_pmccfiltr(u32 val) +{ + write_sysreg(val, PMCCFILTR); +} + +static inline void write_pmovsclr(u32 val) +{ + write_sysreg(val, PMOVSR); +} + +static inline u32 read_pmovsclr(void) +{ + return read_sysreg(PMOVSR); +} + +static inline void write_pmuserenr(u32 val) +{ + write_sysreg(val, PMUSERENR); +} + +static inline u32 read_pmceid0(void) +{ + return read_sysreg(PMCEID0); +} + +static inline u32 read_pmceid1(void) +{ + return read_sysreg(PMCEID1); +} + +static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {} +static inline void kvm_clr_pmu_events(u32 clr) {} +static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr) +{ + return false; +} + +/* PMU Version in DFR Register */ +#define ARMV8_PMU_DFR_VER_NI 0 +#define ARMV8_PMU_DFR_VER_V3P4 0x5 +#define ARMV8_PMU_DFR_VER_V3P5 0x6 +#define ARMV8_PMU_DFR_VER_IMP_DEF 0xF + +static inline bool pmuv3_implemented(int pmuver) +{ + return !(pmuver == ARMV8_PMU_DFR_VER_IMP_DEF || + pmuver == ARMV8_PMU_DFR_VER_NI); +} + +static inline bool is_pmuv3p4(int pmuver) +{ + return pmuver >= ARMV8_PMU_DFR_VER_V3P4; +} + +static inline bool is_pmuv3p5(int pmuver) +{ + return pmuver >= ARMV8_PMU_DFR_VER_V3P5; +} + +#endif diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 06b48ce23e1c..505a306e0271 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -244,19 +244,6 @@ THUMB( fpreg .req r7 ) .endm #endif - .macro local_bh_disable, ti, tmp - ldr \tmp, [\ti, #TI_PREEMPT] - add \tmp, \tmp, #SOFTIRQ_DISABLE_OFFSET - str \tmp, [\ti, #TI_PREEMPT] - .endm - - .macro local_bh_enable_ti, ti, tmp - get_thread_info \ti - ldr \tmp, [\ti, #TI_PREEMPT] - sub \tmp, \tmp, #SOFTIRQ_DISABLE_OFFSET - str \tmp, [\ti, #TI_PREEMPT] - .endm - #define USERL(l, x...) \ 9999: x; \ .pushsection __ex_table,"a"; \ diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h deleted file mode 100644 index 4ebbb58f06ea..000000000000 --- a/arch/arm/include/asm/gpio.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ARCH_ARM_GPIO_H -#define _ARCH_ARM_GPIO_H - -#include <asm-generic/gpio.h> - -/* The trivial gpiolib dispatchers */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -/* - * Provide a default gpio_to_irq() which should satisfy every case. - * However, some platforms want to do this differently, so allow them - * to override it. - */ -#ifndef gpio_to_irq -#define gpio_to_irq __gpio_to_irq -#endif - -#endif /* _ARCH_ARM_GPIO_H */ diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c index 437ff39f7808..fba1f8bb03b5 100644 --- a/arch/arm/kernel/cpuidle.c +++ b/arch/arm/kernel/cpuidle.c @@ -5,7 +5,6 @@ #include <linux/cpuidle.h> #include <linux/of.h> -#include <linux/of_device.h> #include <asm/cpuidle.h> extern struct of_cpuidle_method __cpuidle_method_of_table[]; diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 14eecaaf295f..e4c2677cc1e9 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -116,7 +116,7 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) tocopy = n; ua_flags = uaccess_save_and_enable(); - memcpy((void *)to, from, tocopy); + __memcpy((void *)to, from, tocopy); uaccess_restore(ua_flags); to += tocopy; from += tocopy; @@ -178,7 +178,7 @@ __clear_user_memset(void __user *addr, unsigned long n) tocopy = n; ua_flags = uaccess_save_and_enable(); - memset((void *)addr, 0, tocopy); + __memset((void *)addr, 0, tocopy); uaccess_restore(ua_flags); addr += tocopy; n -= tocopy; diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index 185335843bbd..f236e12d7a59 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -31,34 +31,23 @@ static const struct of_device_id bcm_kona_smc_ids[] __initconst = { int __init bcm_kona_smc_init(void) { struct device_node *node; - const __be32 *prop_val; - u64 prop_size = 0; - unsigned long buffer_size; - u32 buffer_phys; + struct resource res; + int ret; /* Read buffer addr and size from the device tree node */ node = of_find_matching_node(NULL, bcm_kona_smc_ids); if (!node) return -ENODEV; - prop_val = of_get_address(node, 0, &prop_size, NULL); + ret = of_address_to_resource(node, 0, &res); of_node_put(node); - if (!prop_val) + if (ret) return -EINVAL; - /* We assume space for four 32-bit arguments */ - if (prop_size < 4 * sizeof(u32) || prop_size > (u64)ULONG_MAX) - return -EINVAL; - buffer_size = (unsigned long)prop_size; - - buffer_phys = be32_to_cpup(prop_val); - if (!buffer_phys) - return -EINVAL; - - bcm_smc_buffer = ioremap(buffer_phys, buffer_size); + bcm_smc_buffer = ioremap(res.start, resource_size(&res)); if (!bcm_smc_buffer) return -ENOMEM; - bcm_smc_buffer_phys = buffer_phys; + bcm_smc_buffer_phys = res.start; pr_info("Kona Secure API initialized\n"); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 51a247ca4da8..966a0995e047 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -50,11 +50,13 @@ void __init exynos_sysram_init(void) struct device_node *node; for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { + struct resource res; if (!of_device_is_available(node)) continue; - sysram_base_addr = of_iomap(node, 0); - sysram_base_phys = of_translate_address(node, - of_get_address(node, 0, NULL, NULL)); + + of_address_to_resource(node, 0, &res); + sysram_base_addr = ioremap(res.start, resource_size(&res)); + sysram_base_phys = res.start; of_node_put(node); break; } diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 3bf14ca78b62..6d5d7696aaf7 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -667,7 +667,7 @@ void __init exynos_pm_init(void) return; } - if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) { + if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) { pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); of_node_put(np); return; diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index ebc4339b8be4..5909088d5482 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -275,7 +275,7 @@ void __init imx_gpc_check_dt(void) if (WARN_ON(!np)) return; - if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) { + if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) { pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); /* map GPC, so that at least CPUidle and WARs keep working */ diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index c9d7c29d95e1..7f6200925752 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -79,7 +79,7 @@ static void __init imx6q_enet_phy_init(void) static void __init imx6q_1588_init(void) { struct device_node *np; - struct clk *ptp_clk; + struct clk *ptp_clk, *fec_enet_ref; struct clk *enet_ref; struct regmap *gpr; u32 clksel; @@ -90,6 +90,14 @@ static void __init imx6q_1588_init(void) return; } + /* + * If enet_clk_ref configured, we assume DT did it properly and . + * clk-imx6q.c will do needed configuration. + */ + fec_enet_ref = of_clk_get_by_name(np, "enet_clk_ref"); + if (!IS_ERR(fec_enet_ref)) + goto put_node; + ptp_clk = of_clk_get(np, 2); if (IS_ERR(ptp_clk)) { pr_warn("%s: failed to get ptp clock\n", __func__); diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index dbf8d19cef11..7a0299de1db6 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -4,8 +4,6 @@ */ #include <linux/irqchip.h> #include <linux/mfd/syscon.h> -#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> -#include <linux/micrel_phy.h> #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/regmap.h> @@ -16,30 +14,12 @@ #include "cpuidle.h" #include "hardware.h" -static void __init imx6ul_enet_clk_init(void) -{ - struct regmap *gpr; - - gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr"); - if (!IS_ERR(gpr)) - regmap_update_bits(gpr, IOMUXC_GPR1, IMX6UL_GPR1_ENET_CLK_DIR, - IMX6UL_GPR1_ENET_CLK_OUTPUT); - else - pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n"); -} - -static inline void imx6ul_enet_init(void) -{ - imx6ul_enet_clk_init(); -} - static void __init imx6ul_init_machine(void) { imx_print_silicon_rev(cpu_is_imx6ull() ? "i.MX6ULL" : "i.MX6UL", imx_get_soc_revision()); of_platform_default_populate(NULL, NULL, NULL); - imx6ul_enet_init(); imx_anatop_init(); imx6ul_pm_init(); } diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index b9efe9da06e0..2157493b78a9 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -456,7 +456,7 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc, return pmu_mmdc->id; } -static int imx_mmdc_remove(struct platform_device *pdev) +static void imx_mmdc_remove(struct platform_device *pdev) { struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev); @@ -466,7 +466,6 @@ static int imx_mmdc_remove(struct platform_device *pdev) iounmap(pmu_mmdc->mmdc_base); clk_disable_unprepare(pmu_mmdc->mmdc_ipg_clk); kfree(pmu_mmdc); - return 0; } static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base, @@ -592,7 +591,7 @@ static struct platform_driver imx_mmdc_driver = { .of_match_table = imx_mmdc_dt_ids, }, .probe = imx_mmdc_probe, - .remove = imx_mmdc_remove, + .remove_new = imx_mmdc_remove, }; static int __init imx_mmdc_init(void) diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 85b0d9ddb7d8..8c1d4402fd69 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -76,10 +76,4 @@ config CPU_MMP2 help Select code specific to MMP2. MMP2 is ARMv7 compatible. -config USB_EHCI_MV_U2O - bool "EHCI support for PXA USB OTG controller" - depends on USB_EHCI_MV - help - Enables support for OTG controller which can be switched to host mode. - endif diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig index 5dbea7b485af..fa9709f30b46 100644 --- a/arch/arm/mach-mstar/Kconfig +++ b/arch/arm/mach-mstar/Kconfig @@ -20,11 +20,4 @@ config MACH_INFINITY help Support for MStar/Sigmastar infinity IP camera SoCs. -config MACH_MERCURY - bool "MStar/Sigmastar mercury SoC support" - default ARCH_MSTARV7 - help - Support for MStar/Sigmastar mercury dash camera SoCs. - Note that older Mercury2 SoCs are ARM9 based and not supported. - endif diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c index 9aa765d4cdc8..62e982f74bc2 100644 --- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c +++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c @@ -14,6 +14,9 @@ #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include "mv78xx0.h" @@ -21,6 +24,11 @@ #include "mpp.h" +#define TSWXL_AUTO_SWITCH 15 +#define TSWXL_USB_POWER1 30 +#define TSWXL_USB_POWER2 31 + + /* This arch has 2 Giga Ethernet */ static struct mv643xx_eth_platform_data db78x00_ge00_data = { @@ -39,7 +47,7 @@ static struct mv_sata_platform_data db78x00_sata_data = { }; static struct i2c_board_info __initdata db78x00_i2c_rtc = { - I2C_BOARD_INFO("ds1338", 0x68), + I2C_BOARD_INFO("rs5c372a", 0x32), }; @@ -57,9 +65,9 @@ static unsigned int wxl_mpp_config[] __initdata = { MPP10_GE1_RXD2, MPP11_GE1_RXD3, MPP12_GPIO, - MPP13_SYSRST_OUTn, - MPP14_SATA1_ACTn, - MPP15_SATA0_ACTn, + MPP13_GPIO, + MPP14_GPIO, + MPP15_GPIO, MPP16_GPIO, MPP17_GPIO, MPP18_GPIO, @@ -73,7 +81,7 @@ static unsigned int wxl_mpp_config[] __initdata = { MPP26_UA2_CTSn, MPP27_UA2_RTSn, MPP28_GPIO, - MPP29_SYSRST_OUTn, + MPP29_GPIO, MPP30_GPIO, MPP31_GPIO, MPP32_GPIO, @@ -84,19 +92,41 @@ static unsigned int wxl_mpp_config[] __initdata = { MPP37_GPIO, MPP38_GPIO, MPP39_GPIO, - MPP40_UNUSED, - MPP41_UNUSED, - MPP42_UNUSED, - MPP43_UNUSED, - MPP44_UNUSED, - MPP45_UNUSED, - MPP46_UNUSED, - MPP47_UNUSED, - MPP48_SATA1_ACTn, - MPP49_SATA0_ACTn, + MPP40_GPIO, + MPP41_GPIO, + MPP42_GPIO, + MPP43_GPIO, + MPP44_GPIO, + MPP45_GPIO, + MPP46_GPIO, + MPP47_GPIO, + MPP48_GPIO, + MPP49_GPIO, 0 }; +static struct gpio_keys_button tswxl_buttons[] = { + { + .code = KEY_OPTION, + .gpio = TSWXL_AUTO_SWITCH, + .desc = "Power-auto Switch", + .active_low = 1, + } +}; + +static struct gpio_keys_platform_data tswxl_button_data = { + .buttons = tswxl_buttons, + .nbuttons = ARRAY_SIZE(tswxl_buttons), +}; + +static struct platform_device tswxl_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &tswxl_button_data, + }, +}; static void __init wxl_init(void) { @@ -111,7 +141,6 @@ static void __init wxl_init(void) */ mv78xx0_ehci0_init(); mv78xx0_ehci1_init(); - mv78xx0_ehci2_init(); mv78xx0_ge00_init(&db78x00_ge00_data); mv78xx0_ge01_init(&db78x00_ge01_data); mv78xx0_sata_init(&db78x00_sata_data); @@ -119,22 +148,23 @@ static void __init wxl_init(void) mv78xx0_uart1_init(); mv78xx0_uart2_init(); mv78xx0_uart3_init(); + mv78xx0_xor_init(); + mv78xx0_crypto_init(); mv78xx0_i2c_init(); i2c_register_board_info(0, &db78x00_i2c_rtc, 1); + + //enable both usb ports + gpio_direction_output(TSWXL_USB_POWER1, 1); + gpio_direction_output(TSWXL_USB_POWER2, 1); + + //enable rear switch + platform_device_register(&tswxl_button_device); } static int __init wxl_pci_init(void) { - if (machine_is_terastation_wxl()) { - /* - * Assign the x16 PCIe slot on the board to CPU core - * #0, and let CPU core #1 have the four x1 slots. - */ - if (mv78xx0_core_index() == 0) - mv78xx0_pcie_init(0, 1); - else - mv78xx0_pcie_init(1, 0); - } + if (machine_is_terastation_wxl() && mv78xx0_core_index() == 0) + mv78xx0_pcie_init(1, 1); return 0; } diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 461a68945c26..679753fcc0ef 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -342,6 +342,29 @@ void __ref mv78xx0_timer_init(void) IRQ_MV78XX0_TIMER_1, get_tclk()); } +/**************************************************************************** +* XOR engine +****************************************************************************/ +void __init mv78xx0_xor_init(void) +{ + orion_xor0_init(XOR_PHYS_BASE, + XOR_PHYS_BASE + 0x200, + IRQ_MV78XX0_XOR_0, IRQ_MV78XX0_XOR_1); +} + +/**************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) +****************************************************************************/ +void __init mv78xx0_crypto_init(void) +{ + mvebu_mbus_add_window_by_id(MV78XX0_MBUS_SRAM_TARGET, + MV78XX0_MBUS_SRAM_ATTR, + MV78XX0_SRAM_PHYS_BASE, + MV78XX0_SRAM_SIZE); + orion_crypto_init(CRYPTO_PHYS_BASE, MV78XX0_SRAM_PHYS_BASE, + SZ_8K, IRQ_MV78XX0_CRYPTO); +} + /***************************************************************************** * General diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h index d8c6c2400e27..9f1dfd595003 100644 --- a/arch/arm/mach-mv78xx0/common.h +++ b/arch/arm/mach-mv78xx0/common.h @@ -43,6 +43,8 @@ void mv78xx0_uart0_init(void); void mv78xx0_uart1_init(void); void mv78xx0_uart2_init(void); void mv78xx0_uart3_init(void); +void mv78xx0_xor_init(void); +void mv78xx0_crypto_init(void); void mv78xx0_i2c_init(void); void mv78xx0_restart(enum reboot_mode, const char *); diff --git a/arch/arm/mach-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h index 3f19bef7d7ac..88efb1e44142 100644 --- a/arch/arm/mach-mv78xx0/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/mv78xx0.h @@ -49,9 +49,15 @@ #define MV78XX0_REGS_VIRT_BASE IOMEM(0xfec00000) #define MV78XX0_REGS_SIZE SZ_1M +#define MV78XX0_SRAM_PHYS_BASE (0xf2200000) +#define MV78XX0_SRAM_SIZE SZ_8K + #define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 #define MV78XX0_PCIE_MEM_SIZE 0x30000000 +#define MV78XX0_MBUS_SRAM_TARGET 0x09 +#define MV78XX0_MBUS_SRAM_ATTR 0x00 + /* * Core-specific peripheral registers. */ @@ -98,6 +104,8 @@ #define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x51000) #define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x52000) +#define XOR_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x60900) + #define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x70000) #define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x74000) @@ -106,6 +114,8 @@ #define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x88000) #define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x8c000) +#define CRYPTO_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x90000) + #define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0xa0000) /* diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index 0ebc909ea273..533cb7856943 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -42,7 +42,7 @@ void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) u32 pcie_port_size[8] = { 0, - 0x30000000, + 0x20000000, 0x10000000, 0x10000000, 0x08000000, diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 0129b7c514d7..51e47053c816 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -174,7 +174,7 @@ static void __init update_fec_mac_prop(enum mac_oui oui) from = np; - if (of_get_property(np, "local-mac-address", NULL)) + if (of_property_present(np, "local-mac-address")) continue; newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 8df9a4de0e79..cbf703f0d850 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -118,7 +118,7 @@ config MACH_OMAP_OSK depends on ARCH_OMAP16XX help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here - if you have such a board. + if you have such a board. config MACH_OMAP_PALMTE bool "Palm Tungsten E" diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 0f67ac4c6fd2..9108c871d129 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -822,8 +822,6 @@ static int __init modem_nreset_init(void) */ static int __init ams_delta_modem_init(void) { - int err; - if (!machine_is_ams_delta()) return -ENODEV; @@ -832,9 +830,7 @@ static int __init ams_delta_modem_init(void) /* Initialize the modem_nreset regulator consumer before use */ modem_priv.regulator = ERR_PTR(-ENODEV); - err = platform_device_register(&ams_delta_modem_device); - - return err; + return platform_device_register(&ams_delta_modem_device); } arch_initcall_sync(ams_delta_modem_init); diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 9ccc784fd614..bfc7ab010ae2 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -41,6 +41,7 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/irqdomain.h> #include <asm/irq.h> #include <asm/exception.h> diff --git a/arch/arm/mach-omap1/omap-dma.c b/arch/arm/mach-omap1/omap-dma.c index f7e62de427f3..9ee472f8ead1 100644 --- a/arch/arm/mach-omap1/omap-dma.c +++ b/arch/arm/mach-omap1/omap-dma.c @@ -833,7 +833,7 @@ exit_dma_irq_fail: return ret; } -static int omap_system_dma_remove(struct platform_device *pdev) +static void omap_system_dma_remove(struct platform_device *pdev) { int dma_irq, irq_rel = 0; @@ -841,13 +841,11 @@ static int omap_system_dma_remove(struct platform_device *pdev) dma_irq = platform_get_irq(pdev, irq_rel); free_irq(dma_irq, (void *)(irq_rel + 1)); } - - return 0; } static struct platform_driver omap_system_dma_driver = { .probe = omap_system_dma_probe, - .remove = omap_system_dma_remove, + .remove_new = omap_system_dma_remove, .driver = { .name = "omap_dma_system" }, diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 3b53dda9ec79..821727eefd5a 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -255,17 +255,6 @@ config MACH_NOKIA_N8X0 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX -config OMAP3_SDRC_AC_TIMING - bool "Enable SDRC AC timing register changes" - depends on ARCH_OMAP3 - help - If you know that none of your system initiators will attempt to - access SDRAM during CORE DVFS, select Y here. This should boost - SDRAM performance at lower CORE OPPs. There are relatively few - users who will wish to say yes at this point - almost everyone will - wish to say no. Selecting yes without understanding what is - going on could result in system crashes; - endmenu endif diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index d61fa06117b4..c824d4e3db63 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -5,7 +5,7 @@ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/ * Vaibhav Hiremath <hvaibhav@ti.com> * - * Reference taken from from OMAP4 cminst44xx.c + * Reference taken from OMAP4 cminst44xx.c */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5a2a9b8e61ed..aac4c4ee2528 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -706,9 +706,7 @@ static const struct of_device_id ti_clkctrl_match_table[] __initconst = { static int __init _setup_clkctrl_provider(struct device_node *np) { - const __be32 *addrp; struct clkctrl_provider *provider; - u64 size; int i; provider = memblock_alloc(sizeof(*provider), SMP_CACHE_BYTES); @@ -717,8 +715,7 @@ static int __init _setup_clkctrl_provider(struct device_node *np) provider->node = np; - provider->num_addrs = - of_property_count_elems_of_size(np, "reg", sizeof(u32)) / 2; + provider->num_addrs = of_address_count(np); provider->addr = memblock_alloc(sizeof(void *) * provider->num_addrs, @@ -733,11 +730,11 @@ static int __init _setup_clkctrl_provider(struct device_node *np) return -ENOMEM; for (i = 0; i < provider->num_addrs; i++) { - addrp = of_get_address(np, i, &size, NULL); - provider->addr[i] = (u32)of_translate_address(np, addrp); - provider->size[i] = size; - pr_debug("%s: %pOF: %x...%x\n", __func__, np, provider->addr[i], - provider->addr[i] + provider->size[i]); + struct resource res; + of_address_to_resource(np, i, &res); + provider->addr[i] = res.start; + provider->size[i] = resource_size(&res); + pr_debug("%s: %pOF: %pR\n", __func__, np, &res); } list_add(&provider->link, &clkctrl_providers); @@ -2322,11 +2319,11 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, static void __init parse_module_flags(struct omap_hwmod *oh, struct device_node *np) { - if (of_find_property(np, "ti,no-reset-on-init", NULL)) + if (of_property_read_bool(np, "ti,no-reset-on-init")) oh->flags |= HWMOD_INIT_NO_RESET; - if (of_find_property(np, "ti,no-idle-on-init", NULL)) + if (of_property_read_bool(np, "ti,no-idle-on-init")) oh->flags |= HWMOD_INIT_NO_IDLE; - if (of_find_property(np, "ti,no-idle", NULL)) + if (of_property_read_bool(np, "ti,no-idle")) oh->flags |= HWMOD_NO_IDLE; } @@ -3457,7 +3454,7 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, } if (list_empty(&oh->slave_ports)) { - oi = kcalloc(1, sizeof(*oi), GFP_KERNEL); + oi = kzalloc(sizeof(*oi), GFP_KERNEL); if (!oi) goto out_free_class; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index baba73fd6f11..04208cc52784 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -6,6 +6,7 @@ */ #include <linux/clk.h> #include <linux/davinci_emac.h> +#include <linux/gpio/consumer.h> #include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> @@ -108,7 +109,7 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev, if (res) return res; - gpio_export(gpio, 0); + gpiod_export(gpio_to_desc(gpio), 0); return 0; } @@ -123,7 +124,7 @@ static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name) return; } - gpio_export(gpio, 0); + gpiod_export(gpio_to_desc(gpio), 0); udelay(10); gpio_set_value(gpio, 1); @@ -200,8 +201,8 @@ static void __init omap3_sbc_t3517_wifi_init(void) return; } - gpio_export(cm_t3517_wlan_gpios[0].gpio, 0); - gpio_export(cm_t3517_wlan_gpios[1].gpio, 0); + gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0); + gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0); msleep(100); gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0); diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c index 711bcc6c8ddd..c907478be196 100644 --- a/arch/arm/mach-omap2/pm33xx-core.c +++ b/arch/arm/mach-omap2/pm33xx-core.c @@ -104,8 +104,6 @@ static int amx3_common_init(int (*idle)(u32 wfi_flags)) static int am33xx_suspend_init(int (*idle)(u32 wfi_flags)) { - int ret; - gfx_l4ls_clkdm = clkdm_lookup("gfx_l4ls_gfx_clkdm"); if (!gfx_l4ls_clkdm) { @@ -113,9 +111,7 @@ static int am33xx_suspend_init(int (*idle)(u32 wfi_flags)) return -ENODEV; } - ret = amx3_common_init(idle); - - return ret; + return amx3_common_init(idle); } static int am43xx_suspend_init(int (*idle)(u32 wfi_flags)) diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c index 596601367989..1c14e49a90a6 100644 --- a/arch/arm/mach-orion5x/board-rd88f5182.c +++ b/arch/arm/mach-orion5x/board-rd88f5182.c @@ -9,6 +9,7 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/irq.h> diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig deleted file mode 100644 index a9ded7079268..000000000000 --- a/arch/arm/mach-oxnas/Kconfig +++ /dev/null @@ -1,38 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -menuconfig ARCH_OXNAS - bool "Oxford Semiconductor OXNAS Family SoCs" - depends on (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) || ARCH_MULTI_V6 - select ARCH_HAS_RESET_CONTROLLER - select COMMON_CLK_OXNAS - select GPIOLIB - select MFD_SYSCON - select OXNAS_RPS_TIMER - select PINCTRL_OXNAS - select RESET_CONTROLLER - select RESET_OXNAS - select VERSATILE_FPGA_IRQ - select PINCTRL - help - Support for OxNas SoC family developed by Oxford Semiconductor. - -if ARCH_OXNAS - -config MACH_OX810SE - bool "Support OX810SE Based Products" - depends on ARCH_MULTI_V5 - select CPU_ARM926T - help - Include Support for the Oxford Semiconductor OX810SE SoC Based Products. - -config MACH_OX820 - bool "Support OX820 Based Products" - depends on ARCH_MULTI_V6 - select ARM_GIC - select DMA_CACHE_RWFO if SMP - select HAVE_SMP - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - help - Include Support for the Oxford Semiconductor OX820 SoC Based Products. - -endif diff --git a/arch/arm/mach-oxnas/Makefile b/arch/arm/mach-oxnas/Makefile deleted file mode 100644 index 0e78ecfe6c49..000000000000 --- a/arch/arm/mach-oxnas/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-oxnas/headsmp.S b/arch/arm/mach-oxnas/headsmp.S deleted file mode 100644 index 9c0f1479f33a..000000000000 --- a/arch/arm/mach-oxnas/headsmp.S +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com> - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - */ -#include <linux/linkage.h> -#include <linux/init.h> - - __INIT - -/* - * OX820 specific entry point for secondary CPUs. - */ -ENTRY(ox820_secondary_startup) - mov r4, #0 - /* invalidate both caches and branch target cache */ - mcr p15, 0, r4, c7, c7, 0 - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup diff --git a/arch/arm/mach-oxnas/platsmp.c b/arch/arm/mach-oxnas/platsmp.c deleted file mode 100644 index f0a50b9e61df..000000000000 --- a/arch/arm/mach-oxnas/platsmp.c +++ /dev/null @@ -1,96 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com> - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - */ -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include <asm/cacheflush.h> -#include <asm/cp15.h> -#include <asm/smp_plat.h> -#include <asm/smp_scu.h> - -extern void ox820_secondary_startup(void); - -static void __iomem *cpu_ctrl; -static void __iomem *gic_cpu_ctrl; - -#define HOLDINGPEN_CPU_OFFSET 0xc8 -#define HOLDINGPEN_LOCATION_OFFSET 0xc4 - -#define GIC_NCPU_OFFSET(cpu) (0x100 + (cpu)*0x100) -#define GIC_CPU_CTRL 0x00 -#define GIC_CPU_CTRL_ENABLE 1 - -static int __init ox820_boot_secondary(unsigned int cpu, - struct task_struct *idle) -{ - /* - * Write the address of secondary startup into the - * system-wide flags register. The BootMonitor waits - * until it receives a soft interrupt, and then the - * secondary CPU branches to this address. - */ - writel(virt_to_phys(ox820_secondary_startup), - cpu_ctrl + HOLDINGPEN_LOCATION_OFFSET); - - writel(cpu, cpu_ctrl + HOLDINGPEN_CPU_OFFSET); - - /* - * Enable GIC cpu interface in CPU Interface Control Register - */ - writel(GIC_CPU_CTRL_ENABLE, - gic_cpu_ctrl + GIC_NCPU_OFFSET(cpu) + GIC_CPU_CTRL); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - - return 0; -} - -static void __init ox820_smp_prepare_cpus(unsigned int max_cpus) -{ - struct device_node *np; - void __iomem *scu_base; - - np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-scu"); - scu_base = of_iomap(np, 0); - of_node_put(np); - if (!scu_base) - return; - - /* Remap CPU Interrupt Interface Registers */ - np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-gic"); - gic_cpu_ctrl = of_iomap(np, 1); - of_node_put(np); - if (!gic_cpu_ctrl) - goto unmap_scu; - - np = of_find_compatible_node(NULL, NULL, "oxsemi,ox820-sys-ctrl"); - cpu_ctrl = of_iomap(np, 0); - of_node_put(np); - if (!cpu_ctrl) - goto unmap_scu; - - scu_enable(scu_base); - flush_cache_all(); - -unmap_scu: - iounmap(scu_base); -} - -static const struct smp_operations ox820_smp_ops __initconst = { - .smp_prepare_cpus = ox820_smp_prepare_cpus, - .smp_boot_secondary = ox820_boot_secondary, -}; - -CPU_METHOD_OF_DECLARE(ox820_smp, "oxsemi,ox820-smp", &ox820_smp_ops); diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 96f33ef1d9ea..a9ef71008147 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -257,8 +257,7 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)) } pxa_irq_base = io_p2v(res.start); - if (of_find_property(node, "marvell,intc-priority", NULL)) - cpu_has_ipr = 1; + cpu_has_ipr = of_property_read_bool(node, "marvell,intc-priority"); ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0); if (ret < 0) { diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 929cc51ed7c2..d29bdcd5270e 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -890,7 +890,7 @@ static int sharpsl_pm_probe(struct platform_device *pdev) return 0; } -static int sharpsl_pm_remove(struct platform_device *pdev) +static void sharpsl_pm_remove(struct platform_device *pdev) { suspend_set_ops(NULL); @@ -917,13 +917,11 @@ static int sharpsl_pm_remove(struct platform_device *pdev) del_timer_sync(&sharpsl_pm.chrg_full_timer); del_timer_sync(&sharpsl_pm.ac_timer); - - return 0; } static struct platform_driver sharpsl_pm_driver = { .probe = sharpsl_pm_probe, - .remove = sharpsl_pm_remove, + .remove_new = sharpsl_pm_remove, .suspend = sharpsl_pm_suspend, .resume = sharpsl_pm_resume, .driver = { diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c index e97bd59083a8..9f9717874d67 100644 --- a/arch/arm/mach-s3c/s3c64xx.c +++ b/arch/arm/mach-s3c/s3c64xx.c @@ -21,13 +21,13 @@ #include <linux/ioport.h> #include <linux/serial_core.h> #include <linux/serial_s3c.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/io.h> #include <linux/clk/samsung.h> #include <linux/dma-mapping.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/irqchip/arm-vic.h> #include <clocksource/samsung_pwm.h> diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 2eba112f2ad8..d000c678b439 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/errno.h> +#include <linux/gpio/driver.h> #include <linux/gpio/gpio-reg.h> #include <linux/gpio/machine.h> #include <linux/gpio_keys.h> diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 1dbe98948ce3..67f72ca984b2 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -175,18 +175,17 @@ static int jornada_ssp_probe(struct platform_device *dev) return 0; }; -static int jornada_ssp_remove(struct platform_device *dev) +static void jornada_ssp_remove(struct platform_device *dev) { /* Note that this doesn't actually remove the driver, since theres nothing to remove * It just makes sure everything is turned off */ GPSR = GPIO_GPIO25; ssp_exit(); - return 0; }; struct platform_driver jornadassp_driver = { .probe = jornada_ssp_probe, - .remove = jornada_ssp_remove, + .remove_new = jornada_ssp_remove, .driver = { .name = "jornada_ssp", }, diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 6876bc1e33b4..0ef0ebbf31ac 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -376,7 +376,7 @@ static int neponset_probe(struct platform_device *dev) return ret; } -static int neponset_remove(struct platform_device *dev) +static void neponset_remove(struct platform_device *dev) { struct neponset_drvdata *d = platform_get_drvdata(dev); int irq = platform_get_irq(dev, 0); @@ -395,8 +395,6 @@ static int neponset_remove(struct platform_device *dev) nep = NULL; iounmap(d->base); kfree(d); - - return 0; } #ifdef CONFIG_PM_SLEEP @@ -425,7 +423,7 @@ static const struct dev_pm_ops neponset_pm_ops = { static struct platform_driver neponset_device_driver = { .probe = neponset_probe, - .remove = neponset_remove, + .remove_new = neponset_remove, .driver = { .name = "neponset", .pm = PM_OPS, diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index e771ce70e132..ec6f421c0f4d 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/ioport.h> +#include <linux/of.h> #include <linux/of_address.h> #include <linux/smp.h> #include <linux/suspend.h> @@ -210,7 +211,6 @@ static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit)) struct device_node *np_apmu, *np_cpu; struct resource res; int bit, index; - u32 id; for_each_matching_node(np_apmu, apmu_ids) { /* only enable the cluster that includes the boot CPU */ @@ -218,33 +218,29 @@ static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit)) for (bit = 0; bit < CONFIG_NR_CPUS; bit++) { np_cpu = of_parse_phandle(np_apmu, "cpus", bit); - if (np_cpu) { - if (!of_property_read_u32(np_cpu, "reg", &id)) { - if (id == cpu_logical_map(0)) { - is_allowed = true; - of_node_put(np_cpu); - break; - } - - } + if (!np_cpu) + break; + if (of_cpu_node_to_id(np_cpu) == 0) { + is_allowed = true; of_node_put(np_cpu); + break; } + of_node_put(np_cpu); } if (!is_allowed) continue; for (bit = 0; bit < CONFIG_NR_CPUS; bit++) { np_cpu = of_parse_phandle(np_apmu, "cpus", bit); - if (np_cpu) { - if (!of_property_read_u32(np_cpu, "reg", &id)) { - index = get_logical_index(id); - if ((index >= 0) && - !of_address_to_resource(np_apmu, - 0, &res)) - fn(&res, index, bit); - } - of_node_put(np_cpu); - } + if (!np_cpu) + break; + + index = of_cpu_node_to_id(np_cpu); + if ((index >= 0) && + !of_address_to_resource(np_apmu, 0, &res)) + fn(&res, index, bit); + + of_node_put(np_cpu); } } } diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index 1add7ee49b63..7108ad628f8d 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -81,12 +81,6 @@ config ARCH_SPEAR6XX help Supports for ARM's SPEAR6XX family -config MACH_SPEAR600 - def_bool y - depends on ARCH_SPEAR6XX - help - Supports ST SPEAr600 boards configured via the device-tree - config ARCH_SPEAR_AUTO bool depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c index 2ccaa11aaa56..5dcc4ddd1a56 100644 --- a/arch/arm/mach-stm32/board-dt.c +++ b/arch/arm/mach-stm32/board-dt.c @@ -21,6 +21,7 @@ static const char *const stm32_compat[] __initconst = { "st,stm32mp131", "st,stm32mp133", "st,stm32mp135", + "st,stm32mp151", "st,stm32mp157", NULL }; diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c index 26cbce135338..cb63921232a6 100644 --- a/arch/arm/mach-sunxi/mc_smp.c +++ b/arch/arm/mach-sunxi/mc_smp.c @@ -19,7 +19,6 @@ #include <linux/irqchip/arm-gic.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/of_device.h> #include <linux/smp.h> #include <asm/cacheflush.h> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c5bbae86f725..be183ed1232d 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -403,7 +403,7 @@ config CPU_V6K select CPU_THUMB_CAPABLE select CPU_TLB_V6 if MMU -# ARMv7 +# ARMv7 and ARMv8 architectures config CPU_V7 bool select CPU_32v6K diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 3ef9ecdd6343..595e9cb33c1d 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -18,7 +18,8 @@ #include <linux/spinlock.h> #include <linux/bitops.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> #include <linux/leds.h> #include <linux/of.h> #include <linux/of_irq.h> @@ -312,7 +313,7 @@ int orion_gpio_led_blink_set(struct gpio_desc *desc, int state, case GPIO_LED_NO_BLINK_LOW: case GPIO_LED_NO_BLINK_HIGH: orion_gpio_set_blink(gpio, 0); - gpio_set_value(gpio, state); + gpiod_set_raw_value(desc, state); break; case GPIO_LED_BLINK: orion_gpio_set_blink(gpio, 1); diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index a7ec06ce3785..515ca33b854c 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -1,8 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before -# the inclusion of generic Makefile. -ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32 +# Include the generic Makefile to check the built vdso. include $(srctree)/lib/vdso/Makefile hostprogs := vdsomunge diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 9a89264cdcc0..7483ef8bccda 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -22,18 +22,7 @@ @ IRQs enabled. @ ENTRY(do_vfp) - local_bh_disable r10, r4 - ldr r4, .LCvfp - ldr r11, [r10, #TI_CPU] @ CPU number - add r10, r10, #TI_VFPSTATE @ r10 = workspace - ldr pc, [r4] @ call VFP entry point + mov r1, r10 + mov r3, r9 + b vfp_entry ENDPROC(do_vfp) - -ENTRY(vfp_null_entry) - local_bh_enable_ti r10, r4 - ret lr -ENDPROC(vfp_null_entry) - - .align 2 -.LCvfp: - .word vfp_vector diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 26c4f61ecfa3..4d8478264d82 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -6,9 +6,9 @@ * Written by Deep Blue Solutions Limited. * * This code is called from the kernel's undefined instruction trap. - * r9 holds the return address for successful handling. + * r1 holds the thread_info pointer + * r3 holds the return address for successful handling. * lr holds the return address for unrecognised instructions. - * r10 points at the start of the private FP workspace in the thread structure * sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h) */ #include <linux/init.h> @@ -69,13 +69,15 @@ @ VFP hardware support entry point. @ @ r0 = instruction opcode (32-bit ARM or two 16-bit Thumb) +@ r1 = thread_info pointer @ r2 = PC value to resume execution after successful emulation -@ r9 = normal "successful" return address -@ r10 = vfp_state union -@ r11 = CPU number +@ r3 = normal "successful" return address @ lr = unrecognised instruction return address @ IRQs enabled. ENTRY(vfp_support_entry) + ldr r11, [r1, #TI_CPU] @ CPU number + add r10, r1, #TI_VFPSTATE @ r10 = workspace + DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10 .fpu vfpv2 @@ -85,9 +87,9 @@ ENTRY(vfp_support_entry) bne look_for_VFP_exceptions @ VFP is already enabled DBGSTR1 "enable %x", r10 - ldr r3, vfp_current_hw_state_address + ldr r9, vfp_current_hw_state_address orr r1, r1, #FPEXC_EN @ user FPEXC has the enable bit set - ldr r4, [r3, r11, lsl #2] @ vfp_current_hw_state pointer + ldr r4, [r9, r11, lsl #2] @ vfp_current_hw_state pointer bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled cmp r4, r10 @ this thread owns the hw context? #ifndef CONFIG_SMP @@ -146,7 +148,7 @@ vfp_reload_hw: #endif DBGSTR1 "load state %p", r10 - str r10, [r3, r11, lsl #2] @ update the vfp_current_hw_state pointer + str r10, [r9, r11, lsl #2] @ update the vfp_current_hw_state pointer @ Load the saved state back into the VFP VFPFLDMIA r10, r5 @ reload the working registers while @ FPEXC is in a safe state @@ -175,9 +177,12 @@ vfp_hw_state_valid: @ else it's one 32-bit instruction, so @ always subtract 4 from the following @ instruction address. - local_bh_enable_ti r10, r4 - ret r9 @ we think we have handled things + mov lr, r3 @ we think we have handled things +local_bh_enable_and_ret: + adr r0, . + mov r1, #SOFTIRQ_DISABLE_OFFSET + b __local_bh_enable_ip @ tail call look_for_VFP_exceptions: @ Check for synchronous or asynchronous exception @@ -200,13 +205,12 @@ skip: @ not recognised by VFP DBGSTR "not VFP" - local_bh_enable_ti r10, r4 - ret lr + b local_bh_enable_and_ret process_exception: DBGSTR "bounce" mov r2, sp @ nothing stacked - regdump is at TOS - mov lr, r9 @ setup for a return to the user code. + mov lr, r3 @ setup for a return to the user code. @ Now call the C code to package up the bounce to the support code @ r0 holds the trigger instruction diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 01bc48d73847..349dcb944a93 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -32,10 +32,9 @@ /* * Our undef handlers (in entry.S) */ -asmlinkage void vfp_support_entry(void); -asmlinkage void vfp_null_entry(void); +asmlinkage void vfp_support_entry(u32, void *, u32, u32); -asmlinkage void (*vfp_vector)(void) = vfp_null_entry; +static bool have_vfp __ro_after_init; /* * Dual-use variable. @@ -645,6 +644,25 @@ static int vfp_starting_cpu(unsigned int unused) return 0; } +/* + * Entered with: + * + * r0 = instruction opcode (32-bit ARM or two 16-bit Thumb) + * r1 = thread_info pointer + * r2 = PC value to resume execution after successful emulation + * r3 = normal "successful" return address + * lr = unrecognised instruction return address + */ +asmlinkage void vfp_entry(u32 trigger, struct thread_info *ti, u32 resume_pc, + u32 resume_return_address) +{ + if (unlikely(!have_vfp)) + return; + + local_bh_disable(); + vfp_support_entry(trigger, ti, resume_pc, resume_return_address); +} + #ifdef CONFIG_KERNEL_MODE_NEON static int vfp_kmode_exception(struct pt_regs *regs, unsigned int instr) @@ -798,7 +816,6 @@ static int __init vfp_init(void) vfpsid = fmrx(FPSID); barrier(); unregister_undef_hook(&vfp_detect_hook); - vfp_vector = vfp_null_entry; pr_info("VFP support v0.3: "); if (VFP_arch) { @@ -883,7 +900,7 @@ static int __init vfp_init(void) "arm/vfp:starting", vfp_starting_cpu, vfp_dying_cpu); - vfp_vector = vfp_support_entry; + have_vfp = true; thread_register_notifier(&vfp_notifier_block); vfp_pm_init(); diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 1023e896d46b..3f5bf55050e8 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -145,6 +145,7 @@ config ARM64 select GENERIC_GETTIMEOFDAY select GENERIC_VDSO_TIME_NS select HARDIRQS_SW_RESEND + select HAS_IOPORT select HAVE_MOVE_PMD select HAVE_MOVE_PUD select HAVE_PCI @@ -185,6 +186,10 @@ config ARM64 select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_CONTIGUOUS select HAVE_DYNAMIC_FTRACE + select HAVE_DYNAMIC_FTRACE_WITH_ARGS \ + if $(cc-option,-fpatchable-function-entry=2) + select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS \ + if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \ if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \ !CC_OPTIMIZE_FOR_SIZE) @@ -362,6 +367,20 @@ config ARCH_PROC_KCORE_TEXT config BROKEN_GAS_INST def_bool !$(as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n) +config BUILTIN_RETURN_ADDRESS_STRIPS_PAC + bool + # Clang's __builtin_return_adddress() strips the PAC since 12.0.0 + # https://reviews.llvm.org/D75044 + default y if CC_IS_CLANG && (CLANG_VERSION >= 120000) + # GCC's __builtin_return_address() strips the PAC since 11.1.0, + # and this was backported to 10.2.0, 9.4.0, 8.5.0, but not earlier + # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94891 + default y if CC_IS_GCC && (GCC_VERSION >= 110100) + default y if CC_IS_GCC && (GCC_VERSION >= 100200) && (GCC_VERSION < 110000) + default y if CC_IS_GCC && (GCC_VERSION >= 90400) && (GCC_VERSION < 100000) + default y if CC_IS_GCC && (GCC_VERSION >= 80500) && (GCC_VERSION < 90000) + default n + config KASAN_SHADOW_OFFSET hex depends on KASAN_GENERIC || KASAN_SW_TAGS @@ -1150,6 +1169,16 @@ config NVIDIA_CARMEL_CNP_ERRATUM If unsure, say Y. +config ROCKCHIP_ERRATUM_3588001 + bool "Rockchip 3588001: GIC600 can not support shareability attributes" + default y + help + The Rockchip RK3588 GIC600 SoC integration does not support ACE/ACE-lite. + This means, that its sharability feature may not be used, even though it + is supported by the IP itself. + + If unsure, say Y. + config SOCIONEXT_SYNQUACER_PREITS bool "Socionext Synquacer: Workaround for GICv3 pre-ITS" default y diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index b5c1ff19b4c4..ce3ae19e72db 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" +#include "sun50i-h5-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index ccf1ba57fa87..cd1c5b04890a 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -8,7 +8,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb @@ -17,6 +19,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-bananapi-m2s.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index d2f7cb4e5375..eed96f262844 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -125,6 +125,16 @@ clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + gpio_intc: interrupt-controller@0440 { + compatible = "amlogic,meson-a1-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x0440 0x0 0x14>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <49 50 51 52 53 54 55 56>; + }; }; gic: interrupt-controller@ff901000 { diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi index e1605a9b0a13..db605f3a22b4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi @@ -159,7 +159,6 @@ onewire { compatible = "w1-gpio"; gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; - #gpio-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 123a56f7f818..feb27a0ccfb4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1571,15 +1571,20 @@ dmc: bus@38000 { compatible = "simple-bus"; - reg = <0x0 0x38000 0x0 0x400>; #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; + ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>; canvas: video-lut@48 { compatible = "amlogic,canvas"; reg = <0x0 0x48 0x0 0x14>; }; + + pmu: pmu@80 { + reg = <0x0 0x80 0x0 0x40>, + <0x0 0xc00 0x0 0x40>; + interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>; + }; }; usb2_phy1: phy@3a000 { @@ -1705,12 +1710,6 @@ }; }; - pmu: pmu@ff638000 { - reg = <0x0 0xff638000 0x0 0x100>, - <0x0 0xff638c00 0x0 0x100>; - interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>; - }; - aobus: bus@ff800000 { compatible = "simple-bus"; reg = <0x0 0xff800000 0x0 0x100000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts new file mode 100644 index 000000000000..ac6f7ae1d103 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-a311d.dtsi" +#include "meson-g12b-bananapi.dtsi" + +/ { + compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b"; + model = "BananaPi M2S"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c3; + }; +}; + +/* Camera (CSI) bus */ +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; + pinctrl-names = "default"; +}; + +/* Display (DSI) bus */ +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&npu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts new file mode 100644 index 000000000000..1b0c3881c6a1 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org> + */ + +/dts-v1/; + +#include "meson-g12b-bananapi-cm4.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b"; + model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module"; + + aliases { + ethernet0 = ðmac; + i2c0 = &i2c1; + i2c1 = &i2c3; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = <KEY_FN>; + press-threshold-microvolt = <10000>; + }; + }; + + hdmi_connector: hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "BPI-CM4IO"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&cecb_AO { + status = "okay"; +}; + +ðmac { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +/* CSI port */ +&i2c1 { + status = "okay"; +}; + +/* DSI port for touchscreen */ +&i2c3 { + status = "okay"; +}; + +/* miniPCIe port with USB + SIM slot */ +&pcie { + status = "okay"; +}; + +&sd_emmc_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +/* Peripheral Only USB-C port */ +&usb { + dr_mode = "peripheral"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi new file mode 100644 index 000000000000..97e522921b06 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org> + */ + +#include "meson-g12b-a311d.dtsi" +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + aliases { + serial0 = &uart_AO; + rtc1 = &vrtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + emmc_1v8: regulator-emmc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddio_c: regulator-vddio-c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + + gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>; + gpios-states = <1>; + + states = <1800000 0>, + <3300000 1>; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwm-supply = <&dc_in>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwm-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* Ethernet to be enabled in baseboard DT */ +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +/* HDMI to be enabled in baseboard DT */ +&hdmi_tx { + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&dc_in>; +}; + +/* "Camera" I2C bus */ +&i2c1 { + pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; + pinctrl-names = "default"; +}; + +/* Main I2C bus */ +&i2c2 { + pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; + pinctrl-names = "default"; +}; + +/* "ID" I2C bus */ +&i2c3 { + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&pcie { + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + + status = "okay"; +}; + +&saradc { + vref-supply = <&vddao_1v8>; + + status = "okay"; +}; + +/* on-module SDIO WiFi */ +&sd_emmc_a { + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + sd-uhs-sdr104; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; + + status = "okay"; + + rtl8822cs: wifi@1 { + reg = <1>; + }; +}; + +/* SD card to be enabled in baseboard DT */ +&sd_emmc_b { + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_c>; +}; + +/* on-module eMMC */ +&sd_emmc_c { + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +/* on-module UART BT */ +&uart_A { + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart_AO { + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi new file mode 100644 index 000000000000..83709787eb91 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -0,0 +1,521 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + rtc1 = &vrtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */ + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "RST"; + linux,code = <KEY_POWER>; + press-threshold-microvolt = <10000>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-min-state = <0>; + cooling-max-state = <3>; + cooling-levels = <0 120 170 220>; + pwms = <&pwm_cd 1 40000 0>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + }; + + vddcpu_a: regulator-vddcpu-a { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + pwm-supply = <&dc_in>; + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + pwm-supply = <&vsys_3v3>; + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + regulator-boot-on; + regulator-always-on; + }; + + vsys_3v3: regulator-vsys-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VSYS_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb-pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "BPI-M2S"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +/* Main i2c bus */ +&i2c2 { + status = "okay"; + pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; + pinctrl-names = "default"; +}; + +&pcie { + status = "okay"; + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_d_x6_pins>; + pinctrl-names = "default"; + pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + /* enable if WiFi/BT board connected */ + status = "disabled"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + sd-uhs-sdr104; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vddao_1v8>; + + rtl8822cs: wifi@1 { + reg = <1>; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vsys_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + /* enable if WiFi/BT board connected */ + status = "disabled"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb2_phy0 { + phy-supply = <&dc_in>; +}; + +&usb2_phy1 { + phy-supply = <&usb_pwr>; +}; + +&usb3_pcie_phy { + phy-supply = <&usb_pwr>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts index c8e5a0a42b89..29d642e746d4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts @@ -620,7 +620,7 @@ }; &periphs_pinctrl { - keypad_gpio_pins: keypad-gpio { + keypad_gpio_pins: keypad-gpio-state { mux { groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7", diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts index 9a60c5ec2072..890f5bfebb03 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts @@ -360,7 +360,7 @@ pinctrl-0 = <&pwm_e_pins>; pinctrl-names = "default"; clocks = <&xtal>; - clock-names = "clkin2"; + clock-names = "clkin0"; status = "okay"; }; @@ -368,7 +368,7 @@ pinctrl-0 = <&pwm_ao_a_pins>; pinctrl-names = "default"; clocks = <&xtal>; - clock-names = "clkin3"; + clock-names = "clkin0"; status = "okay"; }; @@ -376,7 +376,7 @@ pinctrl-0 = <&pwm_ao_d_e_pins>; pinctrl-names = "default"; clocks = <&xtal>; - clock-names = "clkin4"; + clock-names = "clkin1"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts new file mode 100644 index 000000000000..7f66f263a2ce --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-s922x.dtsi" +#include "meson-g12b-bananapi.dtsi" + +/ { + compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b"; + model = "BananaPi M2S"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts index 5f2d4317ecfb..e238f1f10124 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -6,21 +6,29 @@ /dts-v1/; #include "meson-gxbb-p20x.dtsi" - #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-aiu.h> + / { compatible = "videostrong,kii-pro", "amlogic,meson-gxbb"; model = "Videostrong KII Pro"; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + leds { compatible = "gpio-leds"; led { gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; - default-state = "off"; color = <LED_COLOR_ID_RED>; function = LED_FUNCTION_STATUS; + default-state = "off"; }; }; @@ -35,22 +43,58 @@ }; }; -}; + sound { + compatible = "amlogic,gx-sound-card"; + model = "KII-PRO"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; - bluetooth { - compatible = "brcm,bcm4335a0"; + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; }; }; - +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; +}; ðmac { status = "okay"; @@ -78,3 +122,19 @@ &ir { linux,rc-map-name = "rc-videostrong-kii-pro"; }; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4335a0"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 923d2d8bbb9c..12ef6e81c8bd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -300,8 +300,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson-gxbb-gpio-intc"; + compatible = "amlogic,meson-gxbb-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 874f91c348ec..6c4e68e0e625 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -305,7 +305,6 @@ }; &usb2_phy0 { - pinctrl-names = "default"; phy-supply = <&vcc5v>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 5905a6df09b0..17bcfa4702e1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -312,8 +312,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson-gxl-gpio-intc"; + compatible = "amlogic,meson-gxl-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; @@ -773,16 +773,23 @@ }; }; - eth-phy-mux@55c { - compatible = "mdio-mux-mmioreg", "mdio-mux"; + eth_phy_mux: mdio@558 { + reg = <0x0 0x558 0x0 0xc>; + compatible = "amlogic,gxl-mdio-mux"; #address-cells = <1>; #size-cells = <0>; - reg = <0x0 0x55c 0x0 0x4>; - mux-mask = <0xffffffff>; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "ref"; mdio-parent-bus = <&mdio0>; - internal_mdio: mdio@e40908ff { - reg = <0xe40908ff>; + external_mdio: mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + internal_mdio: mdio@1 { + reg = <0x1>; #address-cells = <1>; #size-cells = <0>; @@ -793,12 +800,6 @@ max-speed = <100>; }; }; - - external_mdio: mdio@2009087f { - reg = <0x2009087f>; - #address-cells = <1>; - #size-cells = <0>; - }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts index 444c249863cb..4eda9f634c42 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts @@ -54,6 +54,10 @@ vbus-supply = <&typec2_vbus>; status = "okay"; + + connector { + compatible = "usb-c-connector"; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index ad50cba42d19..f24460186d3d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -85,7 +85,7 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - apb4: apb4@fe000000 { + apb4: bus@fe000000 { compatible = "simple-bus"; reg = <0x0 0xfe000000 0x0 0x480000>; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi index bb492581f1b7..17045ff81c69 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi @@ -105,7 +105,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; + enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; enable-active-high; regulator-always-on; @@ -316,7 +316,7 @@ * be handled by a USB specific power sequence to reset the Hub * when the USB bus is powered down. */ - usb-hub { + usb-hub-hog { gpio-hog; gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index ddb1b345397f..2fce44939f45 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -48,7 +48,7 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vcc_5v>; - enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; + enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; enable-active-high; regulator-always-on; diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile index 5a7506ff5ea3..aec5e29cdfb7 100644 --- a/arch/arm64/boot/dts/apple/Makefile +++ b/arch/arm64/boot/dts/apple/Makefile @@ -10,3 +10,6 @@ dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi index 1c41954e3899..b1c875e692c8 100644 --- a/arch/arm64/boot/dts/apple/t600x-die0.dtsi +++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi @@ -71,6 +71,15 @@ power-domains = <&ps_sio_cpu>; }; + fpwm0: pwm@39b030000 { + compatible = "apple,t6000-fpwm", "apple,s5l-fpwm"; + reg = <0x3 0x9b030000 0x0 0x4000>; + power-domains = <&ps_fpwm0>; + clocks = <&clkref>; + #pwm-cells = <2>; + status = "disabled"; + }; + i2c0: i2c@39b040000 { compatible = "apple,t6000-i2c", "apple,i2c"; reg = <0x3 0x9b040000 0x0 0x4000>; @@ -233,6 +242,7 @@ interrupt-parent = <&aic>; interrupts = <AIC_IRQ 0 1277 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&ps_apcie_gp_sys>; + status = "disabled"; }; pcie0_dart_3: iommu@584008000 { @@ -242,6 +252,7 @@ interrupt-parent = <&aic>; interrupts = <AIC_IRQ 0 1280 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&ps_apcie_gp_sys>; + status = "disabled"; }; pcie0: pcie@590000000 { @@ -338,6 +349,7 @@ <0 0 0 2 &port02 0 0 0 1>, <0 0 0 3 &port02 0 0 0 2>, <0 0 0 4 &port02 0 0 0 3>; + status = "disabled"; }; port03: pci@3,0 { @@ -357,5 +369,6 @@ <0 0 0 2 &port03 0 0 0 1>, <0 0 0 3 &port03 0 0 0 2>, <0 0 0 4 &port03 0 0 0 3>; + status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi index 34906d522f0a..2e471dfe43cf 100644 --- a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi +++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi @@ -9,6 +9,8 @@ * Copyright The Asahi Linux Contributors */ +#include <dt-bindings/leds/common.h> + / { aliases { serial0 = &serial0; @@ -34,6 +36,18 @@ device_type = "memory"; reg = <0x100 0 0x2 0>; /* To be filled by loader */ }; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm0 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + }; + }; }; &serial0 { @@ -102,13 +116,6 @@ }; }; -&pcie0_dart_2 { - status = "disabled"; -}; - -&pcie0_dart_3 { - status = "disabled"; +&fpwm0 { + status = "okay"; }; - -/delete-node/ &port02; -/delete-node/ &port03; diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi index 00d3a9447c89..1e5a19e49b08 100644 --- a/arch/arm64/boot/dts/apple/t600x-j375.dtsi +++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi @@ -104,6 +104,7 @@ &port02 { /* 10 Gbit Ethernet */ bus-range = <3 3>; + status = "okay"; ethernet0: ethernet@0,0 { reg = <0x30000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ @@ -114,4 +115,14 @@ &port03 { /* USB xHCI */ bus-range = <4 4>; + status = "okay"; +}; + + +&pcie0_dart_2 { + status = "okay"; +}; + +&pcie0_dart_3 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts index b52ddc409893..1c3e37f86d46 100644 --- a/arch/arm64/boot/dts/apple/t8103-j274.dts +++ b/arch/arm64/boot/dts/apple/t8103-j274.dts @@ -37,10 +37,12 @@ &port01 { bus-range = <2 2>; + status = "okay"; }; &port02 { bus-range = <3 3>; + status = "okay"; ethernet0: ethernet@0,0 { reg = <0x30000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ @@ -48,6 +50,14 @@ }; }; +&pcie0_dart_1 { + status = "okay"; +}; + +&pcie0_dart_2 { + status = "okay"; +}; + &i2c2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts index 151074109a11..56b0c67bfcda 100644 --- a/arch/arm64/boot/dts/apple/t8103-j293.dts +++ b/arch/arm64/boot/dts/apple/t8103-j293.dts @@ -11,10 +11,23 @@ #include "t8103.dtsi" #include "t8103-jxxx.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "apple,j293", "apple,t8103", "apple,arm-platform"; model = "Apple MacBook Pro (13-inch, M1, 2020)"; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + }; + }; }; &bluetooth0 { @@ -25,21 +38,6 @@ brcm,board-type = "apple,honshu"; }; -/* - * Remove unused PCIe ports and disable the associated DARTs. - */ - -&pcie0_dart_1 { - status = "disabled"; -}; - -&pcie0_dart_2 { - status = "disabled"; -}; - -/delete-node/ &port01; -/delete-node/ &port02; - &i2c2 { status = "okay"; }; @@ -47,3 +45,7 @@ &i2c4 { status = "okay"; }; + +&fpwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8103-j313.dts b/arch/arm64/boot/dts/apple/t8103-j313.dts index bc1f865aa790..97a4344d8dca 100644 --- a/arch/arm64/boot/dts/apple/t8103-j313.dts +++ b/arch/arm64/boot/dts/apple/t8103-j313.dts @@ -11,10 +11,23 @@ #include "t8103.dtsi" #include "t8103-jxxx.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "apple,j313", "apple,t8103", "apple,arm-platform"; model = "Apple MacBook Air (M1, 2020)"; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + }; + }; }; &bluetooth0 { @@ -25,17 +38,6 @@ brcm,board-type = "apple,shikoku"; }; -/* - * Remove unused PCIe ports and disable the associated DARTs. - */ - -&pcie0_dart_1 { - status = "disabled"; +&fpwm1 { + status = "okay"; }; - -&pcie0_dart_2 { - status = "disabled"; -}; - -/delete-node/ &port01; -/delete-node/ &port02; diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts index 2db425ceb30f..58c8e43789b4 100644 --- a/arch/arm64/boot/dts/apple/t8103-j456.dts +++ b/arch/arm64/boot/dts/apple/t8103-j456.dts @@ -55,13 +55,23 @@ &port01 { bus-range = <2 2>; + status = "okay"; }; &port02 { bus-range = <3 3>; + status = "okay"; ethernet0: ethernet@0,0 { reg = <0x30000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ local-mac-address = [00 10 18 00 00 00]; }; }; + +&pcie0_dart_1 { + status = "okay"; +}; + +&pcie0_dart_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts index 3821ff146c56..152f95fd49a2 100644 --- a/arch/arm64/boot/dts/apple/t8103-j457.dts +++ b/arch/arm64/boot/dts/apple/t8103-j457.dts @@ -37,6 +37,7 @@ &port02 { bus-range = <3 3>; + status = "okay"; ethernet0: ethernet@0,0 { reg = <0x30000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ @@ -44,12 +45,6 @@ }; }; -/* - * Remove unused PCIe port and disable the associated DART. - */ - -&pcie0_dart_1 { - status = "disabled"; +&pcie0_dart_2 { + status = "okay"; }; - -/delete-node/ &port01; diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi index 9859219699f4..9b0dad6b6184 100644 --- a/arch/arm64/boot/dts/apple/t8103.dtsi +++ b/arch/arm64/boot/dts/apple/t8103.dtsi @@ -432,6 +432,15 @@ status = "disabled"; /* only used in J293 */ }; + fpwm1: pwm@235044000 { + compatible = "apple,t8103-fpwm", "apple,s5l-fpwm"; + reg = <0x2 0x35044000 0x0 0x4000>; + power-domains = <&ps_fpwm1>; + clocks = <&clkref>; + #pwm-cells = <2>; + status = "disabled"; + }; + serial0: serial@235200000 { compatible = "apple,s5l-uart"; reg = <0x2 0x35200000 0x0 0x1000>; @@ -724,6 +733,7 @@ interrupt-parent = <&aic>; interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&ps_apcie_gp>; + status = "disabled"; }; pcie0_dart_2: iommu@683008000 { @@ -733,6 +743,7 @@ interrupt-parent = <&aic>; interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&ps_apcie_gp>; + status = "disabled"; }; pcie0: pcie@690000000 { @@ -807,6 +818,7 @@ <0 0 0 2 &port01 0 0 0 1>, <0 0 0 3 &port01 0 0 0 2>, <0 0 0 4 &port01 0 0 0 3>; + status = "disabled"; }; port02: pci@2,0 { @@ -826,6 +838,7 @@ <0 0 0 2 &port02 0 0 0 1>, <0 0 0 3 &port02 0 0 0 2>, <0 0 0 4 &port02 0 0 0 3>; + status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/apple/t8112-j413.dts b/arch/arm64/boot/dts/apple/t8112-j413.dts new file mode 100644 index 000000000000..6f69658623bf --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112-j413.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple MacBook Air (M2, 2022) + * + * target-type: J413 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8112.dtsi" +#include "t8112-jxxx.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "apple,j413", "apple,t8112", "apple,arm-platform"; + model = "Apple MacBook Air (13-inch, M2, 2022)"; + + aliases { + bluetooth0 = &bluetooth0; + wifi0 = &wifi0; + }; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + }; + }; +}; + +/* + * Force the bus number assignments so that we can declare some of the + * on-board devices and properties that are populated by the bootloader + * (such as MAC addresses). + */ +&port00 { + bus-range = <1 1>; + wifi0: wifi@0,0 { + compatible = "pci14e4,4433"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-mac-address = [00 10 18 00 00 10]; + apple,antenna-sku = "XX"; + brcm,board-type = "apple,hokkaido"; + }; + + bluetooth0: bluetooth@0,1 { + compatible = "pci14e4,5f71"; + reg = <0x10100 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-bd-address = [00 00 00 00 00 00]; + brcm,board-type = "apple,hokkaido"; + }; +}; + +&i2c0 { + /* MagSafe port */ + hpm5: usb-pd@3a { + compatible = "apple,cd321x"; + reg = <0x3a>; + interrupt-parent = <&pinctrl_ap>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&fpwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8112-j473.dts b/arch/arm64/boot/dts/apple/t8112-j473.dts new file mode 100644 index 000000000000..06fe257f08be --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112-j473.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple Mac mini (M2, 2023) + * + * target-type: J473 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8112.dtsi" +#include "t8112-jxxx.dtsi" + +/ { + compatible = "apple,j473", "apple,t8112", "apple,arm-platform"; + model = "Apple Mac mini (M2, 2023)"; + + aliases { + ethernet0 = ðernet0; + }; +}; + +/* + * Force the bus number assignments so that we can declare some of the + * on-board devices and properties that are populated by the bootloader + * (such as MAC addresses). + */ +&port00 { + bus-range = <1 1>; +}; + +&port01 { + bus-range = <2 2>; + status = "okay"; +}; + +&port02 { + bus-range = <3 3>; + status = "okay"; + ethernet0: ethernet@0,0 { + reg = <0x30000 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-mac-address = [00 10 18 00 00 00]; + }; +}; + +&pcie1_dart { + status = "okay"; +}; + +&pcie2_dart { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts new file mode 100644 index 000000000000..0ad908349f55 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112-j493.dts @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple MacBook Pro (13-inch, M1, 2022) + * + * target-type: J493 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8112.dtsi" +#include "t8112-jxxx.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "apple,j493", "apple,t8112", "apple,arm-platform"; + model = "Apple MacBook Pro (13-inch, M2, 2022)"; + + aliases { + bluetooth0 = &bluetooth0; + wifi0 = &wifi0; + }; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + }; + }; +}; + +/* + * Force the bus number assignments so that we can declare some of the + * on-board devices and properties that are populated by the bootloader + * (such as MAC addresses). + */ +&port00 { + bus-range = <1 1>; + wifi0: wifi@0,0 { + compatible = "pci14e4,4425"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-mac-address = [00 00 00 00 00 00]; + apple,antenna-sku = "XX"; + brcm,board-type = "apple,kyushu"; + }; + + bluetooth0: bluetooth@0,1 { + compatible = "pci14e4,5f69"; + reg = <0x10100 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-bd-address = [00 00 00 00 00 00]; + brcm,board-type = "apple,kyushu"; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&fpwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi new file mode 100644 index 000000000000..f5edf61113e7 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple M2 MacBook Air/Pro (M2, 2022) + * + * This file contains parts common to all Apple M2 devices using the t8112. + * + * target-type: J493, J413 + * + * Copyright The Asahi Linux Contributors + */ + +/ { + aliases { + serial0 = &serial0; + serial2 = &serial2; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0"; + + framebuffer0: framebuffer@0 { + compatible = "apple,simple-framebuffer", "simple-framebuffer"; + reg = <0 0 0 0>; /* To be filled by loader */ + /* Format properties will be added by loader */ + status = "disabled"; + }; + }; + + memory@800000000 { + device_type = "memory"; + reg = <0x8 0 0x2 0>; /* To be filled by loader */ + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + hpm0: usb-pd@38 { + compatible = "apple,cd321x"; + reg = <0x38>; + interrupt-parent = <&pinctrl_ap>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + }; + + hpm1: usb-pd@3f { + compatible = "apple,cd321x"; + reg = <0x3f>; + interrupt-parent = <&pinctrl_ap>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&nco_clkref { + clock-frequency = <900000000>; +}; diff --git a/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi new file mode 100644 index 000000000000..7c050c6f2707 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi @@ -0,0 +1,1140 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * PMGR Power domains for the Apple T8112 "M2" SoC + * + * Copyright The Asahi Linux Contributors + */ + + +&pmgr { + ps_sbr: power-controller@100 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x100 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sbr"; + apple,always-on; /* Core device */ + }; + + ps_aic: power-controller@108 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x108 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "aic"; + apple,always-on; /* Core device */ + }; + + ps_dwi: power-controller@110 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x110 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dwi"; + apple,always-on; /* Core device */ + }; + + ps_soc_spmi0: power-controller@118 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x118 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "soc_spmi0"; + }; + + ps_gpio: power-controller@120 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x120 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "gpio"; + }; + + ps_pms_busif: power-controller@128 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x128 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_busif"; + apple,always-on; /* Core device */ + }; + + ps_pms: power-controller@130 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x130 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms"; + apple,always-on; /* Core device */ + }; + + ps_pms_c1ppt: power-controller@160 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x160 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_c1ppt"; + power-domains = <&ps_pms>; + }; + + ps_soc_dpe: power-controller@168 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x168 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "soc_dpe"; + apple,always-on; /* Core device */ + }; + + ps_pmgr_soc_ocla: power-controller@170 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x170 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pmgr_soc_ocla"; + power-domains = <&ps_pms>; + }; + + ps_ispsens0: power-controller@178 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x178 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens0"; + }; + + ps_ispsens1: power-controller@180 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x180 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens1"; + }; + + ps_ispsens2: power-controller@188 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x188 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens2"; + }; + + ps_ispsens3: power-controller@190 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x190 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens3"; + }; + + ps_pcie_ref: power-controller@198 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x198 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pcie_ref"; + }; + + ps_aft0: power-controller@1a0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1a0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "aft0"; + }; + + ps_imx: power-controller@1a8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1a8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "imx"; + apple,always-on; /* Apple fabric, critical block */ + }; + + ps_sio_busif: power-controller@1b0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1b0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio_busif"; + }; + + ps_sio: power-controller@1b8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1b8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio"; + apple,always-on; + power-domains = <&ps_sio_busif>; + }; + + ps_sio_cpu: power-controller@1c0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1c0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio_cpu"; + power-domains = <&ps_sio>; + }; + + ps_fpwm0: power-controller@1c8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1c8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "fpwm0"; + power-domains = <&ps_sio>; + }; + + ps_fpwm1: power-controller@1d0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1d0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "fpwm1"; + power-domains = <&ps_sio>; + }; + + ps_fpwm2: power-controller@1d8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1d8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "fpwm2"; + power-domains = <&ps_sio>; + }; + + ps_i2c0: power-controller@1e0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1e0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c0"; + power-domains = <&ps_sio>; + }; + + ps_i2c1: power-controller@1e8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1e8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c1"; + power-domains = <&ps_sio>; + }; + + ps_i2c2: power-controller@1f0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1f0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c2"; + power-domains = <&ps_sio>; + }; + + ps_i2c3: power-controller@1f8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1f8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c3"; + power-domains = <&ps_sio>; + }; + + ps_i2c4: power-controller@200 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x200 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c4"; + power-domains = <&ps_sio>; + }; + + ps_spi_p: power-controller@208 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x208 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi_p"; + power-domains = <&ps_sio>; + }; + + ps_uart_p: power-controller@210 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x210 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart_p"; + power-domains = <&ps_sio>; + }; + + ps_audio_p: power-controller@218 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x218 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "audio_p"; + power-domains = <&ps_sio>; + }; + + ps_aes: power-controller@220 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x220 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "aes"; + power-domains = <&ps_sio>; + }; + + ps_spi0: power-controller@228 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x228 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi0"; + power-domains = <&ps_spi_p>; + }; + + ps_spi1: power-controller@230 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x230 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi1"; + power-domains = <&ps_spi_p>; + }; + + ps_spi2: power-controller@238 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x238 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi2"; + power-domains = <&ps_spi_p>; + }; + + ps_spi3: power-controller@240 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x240 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi3"; + power-domains = <&ps_spi_p>; + }; + + ps_spi4: power-controller@248 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x248 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi4"; + power-domains = <&ps_spi_p>; + }; + + ps_spi5: power-controller@250 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x250 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi5"; + power-domains = <&ps_spi_p>; + }; + + ps_uart_n: power-controller@258 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x258 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart_n"; + power-domains = <&ps_uart_p>; + }; + + ps_uart0: power-controller@260 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x260 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart0"; + power-domains = <&ps_uart_p>; + }; + + ps_uart1: power-controller@268 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x268 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart1"; + power-domains = <&ps_uart_p>; + }; + + ps_uart2: power-controller@270 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x270 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart2"; + power-domains = <&ps_uart_p>; + }; + + ps_uart3: power-controller@278 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x278 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart3"; + power-domains = <&ps_uart_p>; + }; + + ps_uart4: power-controller@280 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x280 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart4"; + power-domains = <&ps_uart_p>; + }; + + ps_uart5: power-controller@288 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x288 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart5"; + power-domains = <&ps_uart_p>; + }; + + ps_uart6: power-controller@290 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x290 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart6"; + power-domains = <&ps_uart_p>; + }; + + ps_uart7: power-controller@298 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x298 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart7"; + power-domains = <&ps_uart_p>; + }; + + ps_uart8: power-controller@2a0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2a0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart8"; + power-domains = <&ps_uart_p>; + }; + + ps_sio_adma: power-controller@2a8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2a8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio_adma"; + power-domains = <&ps_spi_p>, <&ps_audio_p>; + }; + + ps_dpa0: power-controller@2b0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2b0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dpa0"; + power-domains = <&ps_audio_p>; + }; + + ps_dpa1: power-controller@2b8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2b8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dpa1"; + power-domains = <&ps_audio_p>; + }; + + ps_mca0: power-controller@2c0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2c0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca0"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca1: power-controller@2c8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2c8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca1"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca2: power-controller@2d0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2d0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca2"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca3: power-controller@2d8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2d8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca3"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca4: power-controller@2e0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2e0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca4"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca5: power-controller@2e8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2e8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca5"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mcc: power-controller@2f0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2f0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mcc"; + apple,always-on; /* Memory controller */ + }; + + ps_dcs0: power-controller@2f8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2f8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs0"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs2: power-controller@300 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x300 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs2"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs1: power-controller@308 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x308 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs1"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs3: power-controller@310 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x310 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs3"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs4: power-controller@318 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x318 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs4"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs5: power-controller@320 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x320 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs5"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs6: power-controller@328 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x328 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs6"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs7: power-controller@330 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x330 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs7"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_smx0: power-controller@338 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x338 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "smx0"; + apple,always-on; /* Apple fabric, critical block */ + }; + + ps_smx1: power-controller@340 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x340 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "smx1"; + apple,always-on; /* Apple fabric, critical block */ + }; + + ps_apcie: power-controller@348 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x348 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie"; + power-domains = <&ps_imx>, <&ps_pcie_ref>; + }; + + ps_rmx0: power-controller@350 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x350 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "rmx0"; + /* Apple Fabric, display/image stuff: this can power down */ + }; + + ps_rmx1: power-controller@358 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x358 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "rmx1"; + /* Apple Fabric, display/image stuff: this can power down */ + }; + + ps_cmx: power-controller@360 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x360 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "cmx"; + apple,always-on; /* Apple fabric, critical block */ + }; + + ps_mmx: power-controller@368 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x368 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mmx"; + /* Apple Fabric, media stuff: this can power down */ + }; + + ps_disp0_sys: power-controller@370 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x370 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "disp0_sys"; + power-domains = <&ps_rmx1>; + apple,always-on; /* TODO: figure out if we can enable PM here */ + }; + + ps_disp0_fe: power-controller@378 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x378 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "disp0_fe"; + power-domains = <&ps_disp0_sys>; + apple,always-on; /* TODO: figure out if we can enable PM here */ + }; + + ps_dispext_sys: power-controller@380 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x380 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispext_sys"; + power-domains = <&ps_rmx0>; + }; + + ps_dispext_fe: power-controller@388 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x388 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispext_fe"; + power-domains = <&ps_dispext_sys>; + }; + + ps_dispext_cpu0: power-controller@3c8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3c8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispext_cpu0"; + power-domains = <&ps_dispext_fe>; + apple,min-state = <4>; + }; + + ps_dptx_ext_phy: power-controller@3d8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3d8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dptx_ext_phy"; + }; + + ps_dispdfr_fe: power-controller@3e0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3e0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispdfr_fe"; + power-domains = <&ps_rmx0>; + }; + + ps_dispdfr_be: power-controller@3e8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3e8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispdfr_be"; + power-domains = <&ps_dispdfr_fe>; + }; + + ps_mipi_dsi: power-controller@3f0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3f0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mipi_dsi"; + power-domains = <&ps_dispdfr_be>; + }; + + ps_jpg: power-controller@3f8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3f8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "jpg"; + power-domains = <&ps_cmx>; + }; + + ps_apcie_gp: power-controller@400 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x400 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie_gp"; + power-domains = <&ps_apcie>; + apple,always-on; /* Breaks things if shut down */ + }; + + ps_msr: power-controller@408 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x408 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "msr"; + power-domains = <&ps_imx>; + }; + + ps_pmp: power-controller@410 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x410 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pmp"; + apple,always-on; + }; + + ps_pms_sram: power-controller@418 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x418 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_sram"; + apple,always-on; + }; + + ps_msr_ase_core: power-controller@420 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x420 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "msr_ase_core"; + power-domains = <&ps_msr>; + }; + + ps_ans: power-controller@428 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x428 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ans"; + power-domains = <&ps_imx>; + }; + + ps_gfx: power-controller@430 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x430 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "gfx"; + }; + + ps_isp_sys: power-controller@438 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x438 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "isp_sys"; + power-domains = <&ps_rmx1>; + }; + + ps_venc_sys: power-controller@440 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x440 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_sys"; + power-domains = <&ps_rmx1>; + }; + + ps_avd_sys: power-controller@448 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x448 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "avd_sys"; + power-domains = <&ps_mmx>; + }; + + ps_apcie_st: power-controller@450 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x450 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie_st"; + power-domains = <&ps_apcie>, <&ps_ans>; + }; + + ps_atc0_common: power-controller@458 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x458 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_common"; + power-domains = <&ps_imx>; + }; + + ps_atc0_pcie: power-controller@460 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x460 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_pcie"; + power-domains = <&ps_atc0_common>; + }; + + ps_atc0_cio: power-controller@468 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x468 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_cio"; + power-domains = <&ps_atc0_common>; + }; + + ps_atc0_cio_pcie: power-controller@470 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x470 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_cio_pcie"; + power-domains = <&ps_atc0_cio>; + }; + + ps_atc0_cio_usb: power-controller@478 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x478 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_cio_usb"; + power-domains = <&ps_atc0_cio>; + }; + + ps_atc1_common: power-controller@480 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x480 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_common"; + power-domains = <&ps_rmx0>; + }; + + ps_atc1_pcie: power-controller@488 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x488 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_pcie"; + power-domains = <&ps_atc1_common>; + }; + + ps_atc1_cio: power-controller@490 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x490 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_cio"; + power-domains = <&ps_atc1_common>; + }; + + ps_atc1_cio_pcie: power-controller@498 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x498 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_cio_pcie"; + power-domains = <&ps_atc1_cio>; + }; + + ps_atc1_cio_usb: power-controller@4a0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x4a0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_cio_usb"; + power-domains = <&ps_atc1_cio>; + }; + + ps_ane_sys: power-controller@4a8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x4a8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ane_sys"; + power-domains = <&ps_mmx>; + }; + + ps_scodec: power-controller@4b0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x4b0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "scodec"; + power-domains = <&ps_rmx0>; + }; + + ps_sep: power-controller@c00 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0xc00 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sep"; + apple,always-on; + }; + + ps_venc_dma: power-controller@8000 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x8000 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_dma"; + power-domains = <&ps_venc_sys>; + }; + + ps_venc_pipe4: power-controller@8008 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x8008 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_pipe4"; + power-domains = <&ps_venc_dma>; + }; + + ps_venc_pipe5: power-controller@8010 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x8010 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_pipe5"; + power-domains = <&ps_venc_dma>; + }; + + ps_venc_me0: power-controller@8018 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x8018 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_me0"; + power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>; + }; + + ps_venc_me1: power-controller@8020 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x8020 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_me1"; + power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>; + }; + + ps_disp0_cpu0: power-controller@10000 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x10000 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "disp0_cpu0"; + power-domains = <&ps_disp0_fe>; + apple,min-state = <4>; + }; +}; + +&pmgr_mini { + + ps_debug_gated: power-controller@58 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x58 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "debug_gated"; + apple,always-on; /* Core AON device */ + }; + + ps_nub_spmi0: power-controller@60 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x60 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_spmi0"; + apple,always-on; /* Core AON device */ + }; + + ps_nub_spmi1: power-controller@68 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x68 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_spmi1"; + apple,always-on; /* Core AON device */ + }; + + ps_nub_aon: power-controller@70 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x70 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_aon"; + apple,always-on; /* Core AON device */ + }; + + ps_msg: power-controller@78 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x78 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "msg"; + }; + + ps_nub_gpio: power-controller@80 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x80 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_gpio"; + apple,always-on; + }; + + ps_atc0_usb_aon: power-controller@88 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x88 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_usb_aon"; + apple,always-on; /* Needs to stay on for dwc3 to work */ + }; + + ps_atc1_usb_aon: power-controller@90 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x90 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_usb_aon"; + apple,always-on; /* Needs to stay on for dwc3 to work */ + }; + + ps_atc0_usb: power-controller@98 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x98 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_usb"; + power-domains = <&ps_atc0_usb_aon>, <&ps_atc0_common>; + }; + + ps_atc1_usb: power-controller@a0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0xa0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_usb"; + power-domains = <&ps_atc1_usb_aon>, <&ps_atc1_common>; + }; + + ps_nub_fabric: power-controller@a8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0xa8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_fabric"; + apple,always-on; /* Core AON device */ + }; + + ps_nub_sram: power-controller@b0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0xb0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_sram"; + apple,always-on; /* Core AON device */ + }; + + ps_debug_switch: power-controller@b8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0xb8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "debug_switch"; + apple,always-on; /* Core AON device */ + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi new file mode 100644 index 000000000000..1666e6ab250b --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112.dtsi @@ -0,0 +1,921 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple T8112 "M2" SoC + * + * Other names: H14G + * + * Copyright The Asahi Linux Contributors + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/apple-aic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/apple.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + compatible = "apple,t8112", "apple,arm-platform"; + + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu_e0>; + }; + core1 { + cpu = <&cpu_e1>; + }; + core2 { + cpu = <&cpu_e2>; + }; + core3 { + cpu = <&cpu_e3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu_p0>; + }; + core1 { + cpu = <&cpu_p1>; + }; + core2 { + cpu = <&cpu_p2>; + }; + core3 { + cpu = <&cpu_p3>; + }; + }; + }; + + cpu_e0: cpu@0 { + compatible = "apple,blizzard"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&ecluster_opp>; + capacity-dmips-mhz = <756>; + performance-domains = <&cpufreq_e>; + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_e1: cpu@1 { + compatible = "apple,blizzard"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&ecluster_opp>; + capacity-dmips-mhz = <756>; + performance-domains = <&cpufreq_e>; + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_e2: cpu@2 { + compatible = "apple,blizzard"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&ecluster_opp>; + capacity-dmips-mhz = <756>; + performance-domains = <&cpufreq_e>; + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_e3: cpu@3 { + compatible = "apple,blizzard"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&ecluster_opp>; + capacity-dmips-mhz = <756>; + performance-domains = <&cpufreq_e>; + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_p0: cpu@10100 { + compatible = "apple,avalanche"; + device_type = "cpu"; + reg = <0x0 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&pcluster_opp>; + capacity-dmips-mhz = <1024>; + performance-domains = <&cpufreq_p>; + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + cpu_p1: cpu@10101 { + compatible = "apple,avalanche"; + device_type = "cpu"; + reg = <0x0 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&pcluster_opp>; + capacity-dmips-mhz = <1024>; + performance-domains = <&cpufreq_p>; + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + cpu_p2: cpu@10102 { + compatible = "apple,avalanche"; + device_type = "cpu"; + reg = <0x0 0x10102>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&pcluster_opp>; + capacity-dmips-mhz = <1024>; + performance-domains = <&cpufreq_p>; + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + cpu_p3: cpu@10103 { + compatible = "apple,avalanche"; + device_type = "cpu"; + reg = <0x0 0x10103>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&pcluster_opp>; + capacity-dmips-mhz = <1024>; + performance-domains = <&cpufreq_p>; + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + l2_cache_0: l2-cache-0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x400000>; + }; + + l2_cache_1: l2-cache-1 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x1000000>; + }; + }; + + ecluster_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-level = <1>; + clock-latency-ns = <7500>; + }; + opp02 { + opp-hz = /bits/ 64 <912000000>; + opp-level = <2>; + clock-latency-ns = <20000>; + }; + opp03 { + opp-hz = /bits/ 64 <1284000000>; + opp-level = <3>; + clock-latency-ns = <22000>; + }; + opp04 { + opp-hz = /bits/ 64 <1752000000>; + opp-level = <4>; + clock-latency-ns = <30000>; + }; + opp05 { + opp-hz = /bits/ 64 <2004000000>; + opp-level = <5>; + clock-latency-ns = <35000>; + }; + opp06 { + opp-hz = /bits/ 64 <2256000000>; + opp-level = <6>; + clock-latency-ns = <39000>; + }; + opp07 { + opp-hz = /bits/ 64 <2424000000>; + opp-level = <7>; + clock-latency-ns = <53000>; + }; + }; + + pcluster_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp01 { + opp-hz = /bits/ 64 <660000000>; + opp-level = <1>; + clock-latency-ns = <9000>; + }; + opp02 { + opp-hz = /bits/ 64 <924000000>; + opp-level = <2>; + clock-latency-ns = <19000>; + }; + opp03 { + opp-hz = /bits/ 64 <1188000000>; + opp-level = <3>; + clock-latency-ns = <22000>; + }; + opp04 { + opp-hz = /bits/ 64 <1452000000>; + opp-level = <4>; + clock-latency-ns = <24000>; + }; + opp05 { + opp-hz = /bits/ 64 <1704000000>; + opp-level = <5>; + clock-latency-ns = <26000>; + }; + opp06 { + opp-hz = /bits/ 64 <1968000000>; + opp-level = <6>; + clock-latency-ns = <28000>; + }; + opp07 { + opp-hz = /bits/ 64 <2208000000>; + opp-level = <7>; + clock-latency-ns = <30000>; + }; + opp08 { + opp-hz = /bits/ 64 <2400000000>; + opp-level = <8>; + clock-latency-ns = <33000>; + }; + opp09 { + opp-hz = /bits/ 64 <2568000000>; + opp-level = <9>; + clock-latency-ns = <34000>; + }; + opp10 { + opp-hz = /bits/ 64 <2724000000>; + opp-level = <10>; + clock-latency-ns = <36000>; + }; + opp11 { + opp-hz = /bits/ 64 <2868000000>; + opp-level = <11>; + clock-latency-ns = <41000>; + }; + opp12 { + opp-hz = /bits/ 64 <2988000000>; + opp-level = <12>; + clock-latency-ns = <42000>; + }; + opp13 { + opp-hz = /bits/ 64 <3096000000>; + opp-level = <13>; + clock-latency-ns = <44000>; + }; + opp14 { + opp-hz = /bits/ 64 <3204000000>; + opp-level = <14>; + clock-latency-ns = <46000>; + }; + /* Not available until CPU deep sleep is implemented */ +#if 0 + opp15 { + opp-hz = /bits/ 64 <3324000000>; + opp-level = <15>; + clock-latency-ns = <62000>; + turbo-mode; + }; + opp16 { + opp-hz = /bits/ 64 <3408000000>; + opp-level = <16>; + clock-latency-ns = <62000>; + turbo-mode; + }; + opp17 { + opp-hz = /bits/ 64 <3504000000>; + opp-level = <17>; + clock-latency-ns = <62000>; + turbo-mode; + }; +#endif + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&aic>; + interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt"; + interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>, + <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>, + <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>, + <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu-e { + compatible = "apple,blizzard-pmu"; + interrupt-parent = <&aic>; + interrupts = <AIC_FIQ AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu-p { + compatible = "apple,avalanche-pmu"; + interrupt-parent = <&aic>; + interrupts = <AIC_FIQ AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>; + }; + + clkref: clock-ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "clkref"; + }; + + /* + * This is a fabulated representation of the input clock + * to NCO since we don't know the true clock tree. + */ + nco_clkref: clock-ref-nco { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "nco_ref"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges; + nonposted-mmio; + + cpufreq_e: cpufreq@210e20000 { + compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq"; + reg = <0x2 0x10e20000 0 0x1000>; + #performance-domain-cells = <0>; + }; + + cpufreq_p: cpufreq@211e20000 { + compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq"; + reg = <0x2 0x11e20000 0 0x1000>; + #performance-domain-cells = <0>; + }; + + sio_dart: iommu@235004000 { + compatible = "apple,t8110-dart"; + reg = <0x2 0x35004000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 769 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + power-domains = <&ps_sio_cpu>; + }; + + i2c0: i2c@235010000 { + compatible = "apple,t8112-i2c", "apple,i2c"; + reg = <0x2 0x35010000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 761 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c0>; + status = "disabled"; + }; + + i2c1: i2c@235014000 { + compatible = "apple,t8112-i2c", "apple,i2c"; + reg = <0x2 0x35014000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 762 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c1>; + status = "disabled"; + }; + + i2c2: i2c@235018000 { + compatible = "apple,t8112-i2c", "apple,i2c"; + reg = <0x2 0x35018000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 763 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c2>; + status = "disabled"; + }; + + i2c3: i2c@23501c000 { + compatible = "apple,t8112-i2c", "apple,i2c"; + reg = <0x2 0x3501c000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 764 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c3>; + status = "disabled"; + }; + + i2c4: i2c@235020000 { + compatible = "apple,t8112-i2c", "apple,i2c"; + reg = <0x2 0x35020000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 765 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c4>; + status = "disabled"; + }; + + fpwm1: pwm@235044000 { + compatible = "apple,t8112-fpwm", "apple,s5l-fpwm"; + reg = <0x2 0x35044000 0x0 0x4000>; + power-domains = <&ps_fpwm1>; + clocks = <&clkref>; + #pwm-cells = <2>; + status = "disabled"; + }; + + serial0: serial@235200000 { + compatible = "apple,s5l-uart"; + reg = <0x2 0x35200000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 739 IRQ_TYPE_LEVEL_HIGH>; + /* + * TODO: figure out the clocking properly, there may + * be a third selectable clock. + */ + clocks = <&clkref>, <&clkref>; + clock-names = "uart", "clk_uart_baud0"; + power-domains = <&ps_uart0>; + status = "disabled"; + }; + + serial2: serial@235208000 { + compatible = "apple,s5l-uart"; + reg = <0x2 0x35208000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 741 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkref>, <&clkref>; + clock-names = "uart", "clk_uart_baud0"; + power-domains = <&ps_uart2>; + status = "disabled"; + }; + + admac: dma-controller@238200000 { + compatible = "apple,t8112-admac", "apple,admac"; + reg = <0x2 0x38200000 0x0 0x34000>; + dma-channels = <24>; + interrupts-extended = <0>, + <&aic AIC_IRQ 760 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>; + #dma-cells = <1>; + iommus = <&sio_dart 2>; + power-domains = <&ps_sio_adma>; + resets = <&ps_audio_p>; + }; + + mca: i2s@238400000 { + compatible = "apple,t8112-mca", "apple,mca"; + reg = <0x2 0x38400000 0x0 0x18000>, + <0x2 0x38300000 0x0 0x30000>; + + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 753 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 754 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 755 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 756 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 757 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 758 IRQ_TYPE_LEVEL_HIGH>; + + resets = <&ps_audio_p>; + clocks = <&nco 0>, <&nco 1>, <&nco 2>, + <&nco 3>, <&nco 4>, <&nco 4>; + power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>, + <&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>; + dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>, + <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>, + <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>, + <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>, + <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>, + <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>; + dma-names = "tx0a", "rx0a", "tx0b", "rx0b", + "tx1a", "rx1a", "tx1b", "rx1b", + "tx2a", "rx2a", "tx2b", "rx2b", + "tx3a", "rx3a", "tx3b", "rx3b", + "tx4a", "rx4a", "tx4b", "rx4b", + "tx5a", "rx5a", "tx5b", "rx5b"; + + #sound-dai-cells = <1>; + }; + + nco: clock-controller@23b044000 { + compatible = "apple,t8112-nco", "apple,nco"; + reg = <0x2 0x3b044000 0x0 0x14000>; + clocks = <&nco_clkref>; + #clock-cells = <1>; + }; + + aic: interrupt-controller@23b0c0000 { + compatible = "apple,t8112-aic", "apple,aic2"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2 0x3b0c0000 0x0 0x8000>, + <0x2 0x3b0c8000 0x0 0x4>; + reg-names = "core", "event"; + power-domains = <&ps_aic>; + + affinities { + e-core-pmu-affinity { + apple,fiq-index = <AIC_CPU_PMU_E>; + cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>; + }; + + p-core-pmu-affinity { + apple,fiq-index = <AIC_CPU_PMU_P>; + cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>; + }; + }; + }; + + pmgr: power-management@23b700000 { + compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2 0x3b700000 0 0x14000>; + /* child nodes are added in t8103-pmgr.dtsi */ + }; + + pinctrl_ap: pinctrl@23c100000 { + compatible = "apple,t8112-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3c100000 0x0 0x100000>; + power-domains = <&ps_gpio>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_ap 0 0 213>; + apple,npins = <213>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 202 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 203 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 204 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 205 IRQ_TYPE_LEVEL_HIGH>; + + i2c0_pins: i2c0-pins { + pinmux = <APPLE_PINMUX(111, 1)>, + <APPLE_PINMUX(110, 1)>; + }; + + i2c1_pins: i2c1-pins { + pinmux = <APPLE_PINMUX(113, 1)>, + <APPLE_PINMUX(112, 1)>; + }; + + i2c2_pins: i2c2-pins { + pinmux = <APPLE_PINMUX(87, 1)>, + <APPLE_PINMUX(86, 1)>; + }; + + i2c3_pins: i2c3-pins { + pinmux = <APPLE_PINMUX(54, 1)>, + <APPLE_PINMUX(53, 1)>; + }; + + i2c4_pins: i2c4-pins { + pinmux = <APPLE_PINMUX(131, 1)>, + <APPLE_PINMUX(130, 1)>; + }; + + spi3_pins: spi3-pins { + pinmux = <APPLE_PINMUX(46, 1)>, + <APPLE_PINMUX(47, 1)>, + <APPLE_PINMUX(48, 1)>, + <APPLE_PINMUX(49, 1)>; + }; + + pcie_pins: pcie-pins { + pinmux = <APPLE_PINMUX(162, 1)>, + <APPLE_PINMUX(163, 1)>, + <APPLE_PINMUX(164, 1)>; + // TODO: 1 more CLKREQs + }; + }; + + pinctrl_nub: pinctrl@23d1f0000 { + compatible = "apple,t8112-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3d1f0000 0x0 0x4000>; + power-domains = <&ps_nub_gpio>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_nub 0 0 24>; + apple,npins = <24>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 371 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 372 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 373 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 374 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 375 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 376 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 377 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmgr_mini: power-management@23d280000 { + compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2 0x3d280000 0 0x4000>; + /* child nodes are added in t8103-pmgr.dtsi */ + }; + + wdt: watchdog@23d2b0000 { + compatible = "apple,t8112-wdt", "apple,wdt"; + reg = <0x2 0x3d2b0000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 379 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_smc: pinctrl@23e820000 { + compatible = "apple,t8112-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3e820000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_smc 0 0 18>; + apple,npins = <18>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 490 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 491 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 492 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 493 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 494 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 495 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 496 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_aop: pinctrl@24a820000 { + compatible = "apple,t8112-pinctrl", "apple,pinctrl"; + reg = <0x2 0x4a820000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aop 0 0 54>; + apple,npins = <54>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 301 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 302 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 303 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>; + }; + + ans_mbox: mbox@277408000 { + compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x2 0x77408000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 717 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 718 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 719 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 720 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + power-domains = <&ps_ans>; + }; + + sart: sart@27bc50000 { + compatible = "apple,t8112-sart", "apple,t6000-sart"; + reg = <0x2 0x7bc50000 0x0 0x10000>; + power-domains = <&ps_ans>; + }; + + nvme@27bcc0000 { + compatible = "apple,t8112-nvme-ans2", "apple,nvme-ans2"; + reg = <0x2 0x7bcc0000 0x0 0x40000>, + <0x2 0x77400000 0x0 0x4000>; + reg-names = "nvme", "ans"; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 724 IRQ_TYPE_LEVEL_HIGH>; + mboxes = <&ans_mbox>; + apple,sart = <&sart>; + power-domains = <&ps_ans>, <&ps_apcie_st>; + power-domain-names = "ans", "apcie0"; + resets = <&ps_ans>; + }; + + pcie0_dart: iommu@681008000 { + compatible = "apple,t8110-dart"; + reg = <0x6 0x81008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 782 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&ps_apcie_gp>; + }; + + pcie1_dart: iommu@682008000 { + compatible = "apple,t8110-dart"; + reg = <0x6 0x82008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 785 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&ps_apcie_gp>; + status = "disabled"; + }; + + pcie2_dart: iommu@683008000 { + compatible = "apple,t8110-dart"; + reg = <0x6 0x83008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 788 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&ps_apcie_gp>; + status = "disabled"; + }; + + pcie3_dart: iommu@684008000 { + compatible = "apple,t8110-dart"; + reg = <0x6 0x84008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 791 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&ps_apcie_gp>; + status = "disabled"; + }; + + pcie0: pcie@690000000 { + compatible = "apple,t8112-pcie", "apple,pcie"; + device_type = "pci"; + + reg = <0x6 0x90000000 0x0 0x1000000>, + <0x6 0x80000000 0x0 0x100000>, + <0x6 0x81000000 0x0 0x4000>, + <0x6 0x82000000 0x0 0x4000>, + <0x6 0x83000000 0x0 0x4000>, + <0x6 0x84000000 0x0 0x4000>; + reg-names = "config", "rc", "port0", "port1", "port2", "port3"; + + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 781 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 784 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 787 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 790 IRQ_TYPE_LEVEL_HIGH>; + + msi-controller; + msi-parent = <&pcie0>; + msi-ranges = <&aic AIC_IRQ 793 IRQ_TYPE_EDGE_RISING 32>; + + iommu-map = <0x100 &pcie0_dart 0 1>, + <0x200 &pcie1_dart 1 1>, + <0x300 &pcie2_dart 2 1>, + <0x400 &pcie3_dart 3 1>; + iommu-map-mask = <0xff00>; + + bus-range = <0 4>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>, + <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>; + + power-domains = <&ps_apcie_gp>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + + port00: pci@0,0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 166 GPIO_ACTIVE_LOW>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port00 0 0 0 0>, + <0 0 0 2 &port00 0 0 0 1>, + <0 0 0 3 &port00 0 0 0 2>, + <0 0 0 4 &port00 0 0 0 3>; + }; + + port01: pci@1,0 { + device_type = "pci"; + reg = <0x800 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 167 GPIO_ACTIVE_LOW>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port01 0 0 0 0>, + <0 0 0 2 &port01 0 0 0 1>, + <0 0 0 3 &port01 0 0 0 2>, + <0 0 0 4 &port01 0 0 0 3>; + + status = "disabled"; + }; + + port02: pci@2,0 { + device_type = "pci"; + reg = <0x1000 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 168 GPIO_ACTIVE_LOW>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port02 0 0 0 0>, + <0 0 0 2 &port02 0 0 0 1>, + <0 0 0 3 &port02 0 0 0 2>, + <0 0 0 4 &port02 0 0 0 3>; + + status = "disabled"; + }; + + /* TODO: GPIO unknown */ + port03: pci@3,0 { + device_type = "pci"; + reg = <0x1800 0x0 0x0 0x0 0x0>; + //reset-gpios = <&pinctrl_ap 33 GPIO_ACTIVE_LOW>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port03 0 0 0 0>, + <0 0 0 2 &port03 0 0 0 1>, + <0 0 0 3 &port03 0 0 0 2>, + <0 0 0 4 &port03 0 0 0 3>; + + status = "disabled"; + }; + }; + }; +}; + +#include "t8112-pmgr.dtsi" diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts index d8b60575eb4f..78204d71ecd2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts @@ -58,12 +58,16 @@ function = "usb2"; color = <LED_COLOR_ID_WHITE>; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; }; led-usb3 { function = "usb3"; color = <LED_COLOR_ID_WHITE>; gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>; + linux,default-trigger = "usbport"; }; led-wifi { diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts index 296393d4aaab..fcf092c81b59 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts @@ -64,12 +64,16 @@ function = "usb2"; color = <LED_COLOR_ID_BLUE>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; }; led-usb3 { - function = "usbd3"; + function = "usb3"; color = <LED_COLOR_ID_BLUE>; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>; + linux,default-trigger = "usbport"; }; led-brightness { diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts index 839ca33178b0..d94a53d68320 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts @@ -120,7 +120,7 @@ }; &leds { - led-power@11 { + led@11 { reg = <0x11>; function = LED_FUNCTION_POWER; color = <LED_COLOR_ID_WHITE>; @@ -130,7 +130,7 @@ pinctrl-0 = <&pins_led_17_a>; }; - led-wan-red@12 { + led@12 { reg = <0x12>; function = LED_FUNCTION_WAN; color = <LED_COLOR_ID_RED>; @@ -139,7 +139,7 @@ pinctrl-0 = <&pins_led_18_a>; }; - led-wps@14 { + led@14 { reg = <0x14>; function = LED_FUNCTION_WPS; color = <LED_COLOR_ID_WHITE>; @@ -148,7 +148,7 @@ pinctrl-0 = <&pins_led_20_a>; }; - led-wan-white@15 { + led@15 { reg = <0x15>; function = LED_FUNCTION_WAN; color = <LED_COLOR_ID_WHITE>; @@ -157,7 +157,7 @@ pinctrl-0 = <&pins_led_21_a>; }; - led-lan@19 { + led@19 { reg = <0x19>; function = LED_FUNCTION_LAN; color = <LED_COLOR_ID_WHITE>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi index eb2a78f4e033..457805efb385 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -107,6 +107,12 @@ clock-frequency = <50000000>; clock-output-names = "periph"; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; soc { @@ -142,6 +148,19 @@ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb_phy PHY_TYPE_USB2>; status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ehci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ehci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; }; ohci: usb@c400 { @@ -150,6 +169,19 @@ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb_phy PHY_TYPE_USB2>; status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ohci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ohci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; }; xhci: usb@d000 { @@ -158,6 +190,19 @@ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb_phy PHY_TYPE_USB3>; status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + xhci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + xhci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; }; bus@80000 { @@ -254,7 +299,7 @@ }; }; - procmon: syscon@280000 { + procmon: bus@280000 { compatible = "simple-bus"; reg = <0x280000 0x1000>; ranges; @@ -531,6 +576,18 @@ #size-cells = <0>; }; + hsspi: spi@1000{ + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + nand-controller@1800 { #address-cells = <1>; #size-cells = <0>; @@ -538,7 +595,7 @@ reg = <0x1800 0x600>, <0x2000 0x10>; reg-names = "nand", "nand-int-base"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "nand"; + interrupt-names = "nand_ctlrdy"; status = "okay"; nandcs: nand@0 { diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi index d5bc31980f03..46aa8c0b7971 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi @@ -79,6 +79,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -86,6 +87,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -117,6 +124,19 @@ #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi index 6f805266d3c9..7020f2e995e2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi @@ -60,6 +60,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -67,6 +68,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -99,6 +106,18 @@ #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi index b982249b80a2..6a0242cbea57 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi @@ -79,6 +79,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -86,6 +87,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -117,6 +124,18 @@ #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi index a996d436e977..1a12905266ef 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi @@ -79,6 +79,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -86,6 +87,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -117,6 +124,19 @@ #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi index 62c530d4b103..f41ebc30666f 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi @@ -60,6 +60,12 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi index 34c7b513d363..fa2688f41f06 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi @@ -78,6 +78,12 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -137,5 +143,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts index fcbd3c430ace..c4e6e71f6310 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts index a3623e6f6919..e69cd683211a 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts index e39f1e6d4774..db2c82d6dfd8 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts index eba07e0b1ca6..25c12bc63545 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts index af17091ae764..faba21f03120 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts index 032aeb75c983..9808331eede2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts index 0cbf582f5d54..1f561c8e13b0 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index a9186166c068..388424b3e1d3 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -178,7 +178,7 @@ <0x02e00000 0x600000>; /* GICR */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gic_its: gic-its@63c20000 { + gic_its: msi-controller@63c20000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi index e0a71795261b..8ad31dee11a3 100644 --- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi @@ -389,9 +389,10 @@ <0x8010 0x80000000 0x0 0x600000>; /* GICR */ interrupts = <1 9 0xf04>; - its: gic-its@8010,00020000 { + its: msi-controller@801000020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x8010 0x20000 0x0 0x200000>; }; }; diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi index dfb41705a9a9..3419bd252696 100644 --- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi @@ -55,7 +55,7 @@ method = "smc"; }; - gic: interrupt-controller@400080000 { + gic: interrupt-controller@4000080000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; #address-cells = <2>; @@ -67,7 +67,7 @@ <0x04 0x01000000 0x0 0x1000000>; /* GICR */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gicits: gic-its@40010000 { + gicits: msi-controller@4000100000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x04 0x00100000 0x0 0x20000>; /* GIC ITS */ diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index f54f30633417..e4ed788413fe 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -21,6 +21,8 @@ gsc0 = &gsc_0; gsc1 = &gsc_1; gsc2 = &gsc_2; + mmc0 = &mshc_0; + mmc2 = &mshc_2; pinctrl0 = &pinctrl_alive; pinctrl1 = &pinctrl_aud; pinctrl2 = &pinctrl_cpif; @@ -40,8 +42,6 @@ spi2 = &spi_2; spi3 = &spi_3; spi4 = &spi_4; - mshc0 = &mshc_0; - mshc2 = &mshc_2; }; chosen { @@ -952,6 +952,7 @@ &mshc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 5519a80576c5..91ae0462a706 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -911,12 +911,20 @@ }; pmu_system_controller: system-controller@105c0000 { - compatible = "samsung,exynos5433-pmu", "syscon"; + compatible = "samsung,exynos5433-pmu", "simple-mfd", "syscon"; reg = <0x105c0000 0x5008>; #clock-cells = <1>; clock-names = "clkout16"; clocks = <&xxti>; + mipi_phy: mipi-phy { + compatible = "samsung,exynos5433-mipi-video-phy"; + #phy-cells = <1>; + samsung,cam0-sysreg = <&syscon_cam0>; + samsung,cam1-sysreg = <&syscon_cam1>; + samsung,disp-sysreg = <&syscon_disp>; + }; + reboot: syscon-reboot { compatible = "syscon-reboot"; regmap = <&pmu_system_controller>; @@ -936,15 +944,6 @@ interrupts = <GIC_PPI 9 0xf04>; }; - mipi_phy: video-phy { - compatible = "samsung,exynos5433-mipi-video-phy"; - #phy-cells = <1>; - samsung,pmu-syscon = <&pmu_system_controller>; - samsung,cam0-sysreg = <&syscon_cam0>; - samsung,cam1-sysreg = <&syscon_cam1>; - samsung,disp-sysreg = <&syscon_disp>; - }; - decon: decon@13800000 { compatible = "samsung,exynos5433-decon"; reg = <0x13800000 0x2104>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index f3f4a6ab4b49..1f2eddcebdd9 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -17,9 +17,9 @@ compatible = "samsung,exynos7-espresso", "samsung,exynos7"; aliases { + mmc0 = &mmc_0; + mmc2 = &mmc_2; serial0 = &serial_2; - mshc0 = &mmc_0; - mshc2 = &mmc_2; }; chosen { @@ -362,6 +362,7 @@ &mmc_0 { status = "okay"; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; card-detect-delay = <200>; diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts index 5db9a81ac7bb..47a389d9ff7d 100644 --- a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts @@ -18,6 +18,7 @@ chassis-type = "handset"; aliases { + mmc0 = &mmc_0; serial0 = &serial_0; serial1 = &serial_1; serial2 = &serial_2; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index a38fe5129937..d67e98120313 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -245,6 +245,15 @@ "dout_peri_uart", "dout_peri_ip"; }; + cmu_g3d: clock-controller@11400000 { + compatible = "samsung,exynos850-cmu-g3d"; + reg = <0x11400000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, <&cmu_top CLK_DOUT_G3D_SWITCH>; + clock-names = "oscclk", "dout_g3d_switch"; + }; + cmu_apm: clock-controller@11800000 { compatible = "samsung,exynos850-cmu-apm"; reg = <0x11800000 0x8000>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 198fff3731ae..ef7d17aef58f 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -89,8 +89,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb @@ -122,9 +124,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index af9194eca556..73eb6061c73e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -56,14 +56,10 @@ }; &enetc_port2 { - nvmem-cells = <&base_mac_address 2>; - nvmem-cell-names = "mac-address"; status = "okay"; }; &enetc_port3 { - nvmem-cells = <&base_mac_address 3>; - nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -84,8 +80,6 @@ managed = "in-band-status"; phy-handle = <&qsgmii_phy0>; phy-mode = "qsgmii"; - nvmem-cells = <&base_mac_address 4>; - nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -94,8 +88,6 @@ managed = "in-band-status"; phy-handle = <&qsgmii_phy1>; phy-mode = "qsgmii"; - nvmem-cells = <&base_mac_address 5>; - nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -104,8 +96,6 @@ managed = "in-band-status"; phy-handle = <&qsgmii_phy2>; phy-mode = "qsgmii"; - nvmem-cells = <&base_mac_address 6>; - nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -114,8 +104,6 @@ managed = "in-band-status"; phy-handle = <&qsgmii_phy3>; phy-mode = "qsgmii"; - nvmem-cells = <&base_mac_address 7>; - nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts index 1f34c7553459..7cd29ab970d9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts @@ -55,7 +55,5 @@ &enetc_port1 { phy-handle = <&phy0>; phy-mode = "rgmii-id"; - nvmem-cells = <&base_mac_address 0>; - nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts index aac41192caa1..113b1df74bf8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -36,14 +36,10 @@ }; &enetc_port2 { - nvmem-cells = <&base_mac_address 2>; - nvmem-cell-names = "mac-address"; status = "okay"; }; &enetc_port3 { - nvmem-cells = <&base_mac_address 3>; - nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -56,8 +52,6 @@ managed = "in-band-status"; phy-handle = <&phy0>; phy-mode = "sgmii"; - nvmem-cells = <&base_mac_address 0>; - nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -66,8 +60,6 @@ managed = "in-band-status"; phy-handle = <&phy1>; phy-mode = "sgmii"; - nvmem-cells = <&base_mac_address 1>; - nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts index a4421db3784e..9b5e92fb753e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts @@ -43,7 +43,5 @@ &enetc_port1 { phy-handle = <&phy1>; phy-mode = "rgmii-id"; - nvmem-cells = <&base_mac_address 1>; - nvmem-cell-names = "mac-address"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 8b65af4a7147..4ab17b984b03 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -92,8 +92,6 @@ phy-handle = <&phy0>; phy-mode = "sgmii"; managed = "in-band-status"; - nvmem-cells = <&base_mac_address 0>; - nvmem-cell-names = "mac-address"; status = "okay"; }; @@ -156,21 +154,6 @@ label = "bootloader environment"; }; }; - - otp-1 { - compatible = "user-otp"; - - nvmem-layout { - compatible = "kontron,sl28-vpd"; - - serial_number: serial-number { - }; - - base_mac_address: base-mac-address { - #nvmem-cell-cells = <1>; - }; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 9e50976bcb8e..678bb0358751 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -131,7 +131,7 @@ interrupt-controller; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; - its: gic-its@6020000 { + its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index e5fb137ac02b..8f6090a9aef2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -123,7 +123,7 @@ #size-cells = <2>; ranges; - its: gic-its@6020000 { + its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x0 0x6020000 0 0x20000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 348d9e3a9125..d2f5345d0560 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -60,7 +60,7 @@ interrupt-controller; interrupts = <1 9 0x4>; - its: gic-its@6020000 { + its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x0 0x6020000 0 0x20000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 50c19e8405d5..ea6a94b57aeb 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -395,7 +395,7 @@ interrupt-controller; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - its: gic-its@6020000 { + its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x0 0x6020000 0 0x20000>; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi new file mode 100644 index 000000000000..685d4294f4f1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + regulator-name = "VCC USBH2(ABCD) / USBH(3|4)"; + }; +}; + +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +/* TODO: Audio Mixer */ + +/* TODO: Asynchronous Sample Rate Converter (ASRC) */ + +/* TODO: Display Controller */ + +/* TODO: DPU */ + +/* Apalis ETH1 */ +&fec1 { + status = "okay"; +}; + +/* Apalis CAN1 */ +&flexcan1 { + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + status = "okay"; +}; + +/* TODO: GPU */ + +/* Apalis I2C1 */ +&i2c2 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + status = "okay"; + }; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + status = "okay"; +}; + +/* Apalis SPI1 */ +&lpspi0 { + status = "okay"; +}; + +/* Apalis SPI2 */ +&lpspi2 { + status = "okay"; +}; + +/* Apalis UART3 */ +&lpuart0 { + status = "okay"; +}; + +/* Apalis UART1 */ +&lpuart1 { + status = "okay"; +}; + +/* Apalis UART4 */ +&lpuart2 { + status = "okay"; +}; + +/* Apalis UART2 */ +&lpuart3 { + status = "okay"; +}; + +/* Apalis PWM3, MXM3 pin 6 */ +&lsio_pwm0 { + status = "okay"; +}; + +/* Apalis PWM4, MXM3 pin 8 */ +&lsio_pwm1 { + status = "okay"; +}; + +/* Apalis PWM1, MXM3 pin 2 */ +&lsio_pwm2 { + status = "okay"; +}; + +/* Apalis PWM2, MXM3 pin 4 */ +&lsio_pwm3 { + status = "okay"; +}; + +/* TODO: Apalis PCIE1 */ + +/* TODO: Apalis BKL1_PWM */ + +/* TODO: Apalis DAP1 */ + +/* TODO: Apalis Analogue Audio */ + +/* TODO: Apalis SATA1 */ + +/* TODO: Apalis SPDIF1 */ + +/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ + +/* Apalis USBO1 */ +&usbotg1 { + status = "okay"; +}; + +/* TODO: Apalis USBH4 SuperSpeed */ + +/* Apalis MMC1 */ +&usdhc2 { + status = "okay"; +}; + +/* Apalis SD1 */ +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi new file mode 100644 index 000000000000..c6d51f116298 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include <dt-bindings/leds/common.h> + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_ixora>; + + /* LED_4_GREEN / MXM3_188 */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>; + }; + + /* LED_4_RED / MXM3_178 */ + led-2 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>; + }; + + /* LED_5_GREEN / MXM3_152 */ + led-3 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>; + }; + + /* LED_5_RED / MXM3_156 */ + led-4 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + regulator-name = "VCC_USBH(2|4)"; + }; +}; + +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +/* TODO: Audio Mixer */ + +/* TODO: Asynchronous Sample Rate Converter (ASRC) */ + +/* TODO: Display Controller */ + +/* TODO: DPU */ + +/* Apalis ETH1 */ +&fec1 { + status = "okay"; +}; + +/* Apalis CAN1 */ +&flexcan1 { + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + status = "okay"; +}; + +/* TODO: GPU */ + +/* Apalis I2C1 */ +&i2c2 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + status = "okay"; + }; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, + <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>, + <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>, + <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>, + <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>, + <&pinctrl_qspi1a_gpios>, <&pinctrl_sata1_act>, + <&pinctrl_sim0_gpios>, <&pinctrl_uart24_forceoff>, + <&pinctrl_usdhc1_gpios>; + + pinctrl_leds_ixora: ledsixoragrp { + fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27 0x06000061>, /* LED_4_GREEN */ + <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29 0x06000061>, /* LED_4_RED */ + <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20 0x06000061>, /* LED_5_GREEN */ + <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x06000061>; /* LED_5_RED */ + }; + + pinctrl_uart24_forceoff: uart24forceoffgrp { + fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25 0x00000021>; + }; +}; + +/* Apalis SPI1 */ +&lpspi0 { + status = "okay"; +}; + +/* Apalis SPI2 */ +&lpspi2 { + status = "okay"; +}; + +/* Apalis UART3 */ +&lpuart0 { + status = "okay"; +}; + +/* Apalis UART1 */ +&lpuart1 { + status = "okay"; +}; + +/* Apalis UART4 */ +&lpuart2 { + status = "okay"; +}; + +/* Apalis UART2 */ +&lpuart3 { + status = "okay"; +}; + +&lsio_gpio5 { + gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03", + "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07", + "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11", + "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15", + "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19", + "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23", + "gpio5-24", "UART24-FORCEOFF", "gpio5-26", + "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30", + "gpio5-31"; + ngpios = <32>; +}; + +/* Apalis PWM3, MXM3 pin 6 */ +&lsio_pwm0 { + status = "okay"; +}; + +/* Apalis PWM4, MXM3 pin 8 */ +&lsio_pwm1 { + status = "okay"; +}; + +/* Apalis PWM1, MXM3 pin 2 */ +&lsio_pwm2 { + status = "okay"; +}; + +/* Apalis PWM2, MXM3 pin 4 */ +&lsio_pwm3 { + status = "okay"; +}; + +/* TODO: Apalis PCIE1 */ + +/* TODO: Apalis BKL1_PWM */ + +/* TODO: Apalis DAP1 */ + +/* TODO: Apalis Analogue Audio */ + +/* TODO: Apalis SATA1 */ + +/* TODO: Apalis SPDIF1 */ + +/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ + +/* Apalis USBO1 */ +&usbotg1 { + status = "okay"; +}; + +/* TODO: Apalis USBH4 SuperSpeed */ + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>; + pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>; + pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>; + pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>; + bus-width = <4>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi new file mode 100644 index 000000000000..40067ab8aa74 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include <dt-bindings/leds/common.h> + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_ixora>; + + /* LED_4_GREEN / MXM3_188 */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>; + }; + + /* LED_4_RED / MXM3_178 */ + led-2 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>; + }; + + /* LED_5_GREEN / MXM3_152 */ + led-3 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>; + }; + + /* LED_5_RED / MXM3_156 */ + led-4 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + /* MMC1_PWR_CTRL */ + gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3_vmmc"; + }; + + reg_can1_supply: regulator-can1-supply { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can1_power>; + gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "can1_supply"; + }; + + reg_can2_supply: regulator-can2-supply { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sata1_act>; + gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "can2_supply"; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + regulator-name = "VCC_USBH(2|4)"; + }; +}; + +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +/* TODO: Audio Mixer */ + +/* TODO: Asynchronous Sample Rate Converter (ASRC) */ + +/* TODO: Display Controller */ + +/* TODO: DPU */ + +/* Apalis ETH1 */ +&fec1 { + status = "okay"; +}; + +/* Apalis CAN1 */ +&flexcan1 { + xceiver-supply = <®_can1_supply>; + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + xceiver-supply = <®_can2_supply>; + status = "okay"; +}; + +/* TODO: GPU */ + +/* Apalis I2C1 */ +&i2c2 { + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + status = "okay"; + }; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, + <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>, + <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>, + <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>, + <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>, + <&pinctrl_qspi1a_gpios>, <&pinctrl_sim0_gpios>, + <&pinctrl_uart24_forceoff>, <&pinctrl_usdhc1_gpios>; + + /* PMIC MMC1 power-switch */ + pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19 0x00000021>; /* MXM3_148, PMIC */ + }; + + /* FlexCAN PMIC */ + pinctrl_enable_can1_power: enablecan1powergrp { + fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021>; /* MXM3_158, PMIC */ + }; + + pinctrl_leds_ixora: ledsixoragrp { + fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27 0x06000061>, /* LED_4_GREEN */ + <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29 0x06000061>, /* LED_4_RED */ + <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20 0x06000061>, /* LED_5_GREEN */ + <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x06000061>; /* LED_5_RED */ + }; + + pinctrl_uart24_forceoff: uart24forceoffgrp { + fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25 0x00000021>; + }; +}; + +/* Apalis SPI1 */ +&lpspi0 { + status = "okay"; +}; + +/* Apalis SPI2 */ +&lpspi2 { + status = "okay"; +}; + +/* Apalis UART3 */ +&lpuart0 { + status = "okay"; +}; + +/* Apalis UART1 */ +&lpuart1 { + status = "okay"; +}; + +/* Apalis UART4 */ +&lpuart2 { + status = "okay"; +}; + +/* Apalis UART2 */ +&lpuart3 { + status = "okay"; +}; + +&lsio_gpio5 { + gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03", + "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07", + "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11", + "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15", + "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19", + "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23", + "gpio5-24", "UART24-FORCEOFF", "gpio5-26", + "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30", + "gpio5-31"; + ngpios = <32>; +}; + +/* Apalis PWM3, MXM3 pin 6 */ +&lsio_pwm0 { + status = "okay"; +}; + +/* Apalis PWM4, MXM3 pin 8 */ +&lsio_pwm1 { + status = "okay"; +}; + +/* Apalis PWM1, MXM3 pin 2 */ +&lsio_pwm2 { + status = "okay"; +}; + +/* Apalis PWM2, MXM3 pin 4 */ +&lsio_pwm3 { + status = "okay"; +}; + +/* TODO: Apalis PCIE1 */ + +/* TODO: Apalis BKL1_PWM */ + +/* TODO: Apalis DAP1 */ + +/* TODO: Apalis Analogue Audio */ + +/* TODO: Apalis SATA1 */ + +/* TODO: Apalis SPDIF1 */ + +/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ + +/* Apalis USBO1 */ +&usbotg1 { + status = "okay"; +}; + +/* TODO: Apalis USBH4 SuperSpeed */ + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>; + pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>; + pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>; + pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>; + bus-width = <4>; + cap-power-off-card; + /delete-property/ no-1-8-v; + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi new file mode 100644 index 000000000000..bd5d771637ca --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi @@ -0,0 +1,1484 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include <dt-bindings/pwm/pwm.h> + +/ { + chosen { + stdout-path = &lpuart1; + }; + + /* Apalis BKL1 */ + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bkl_on>; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */ + /* TODO: hook-up to Apalis BKL1_PWM */ + status = "disabled"; + }; + + gpio_fan: gpio-fan { + compatible = "gpio-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio8>; + gpios = <&lsio_gpio3 28 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 3000 1>; + }; + + /* TODO: LVDS Panel */ + + /* TODO: Shared PCIe/SATA Reference Clock */ + + /* TODO: PCIe Wi-Fi Reference Clock */ + + /* + * Power management bus used to control LDO1OUT of the + * second PMIC PF8100. This is used for controlling voltage levels of + * typespecific RGMII signals and Apalis UART2_RTS UART2_CTS. + * + * IMX_SC_R_BOARD_R1 for 3.3V + * IMX_SC_R_BOARD_R2 for 1.8V + * IMX_SC_R_BOARD_R3 for 2.5V + * Note that for 2.5V operation the pad muxing needs to be changed, + * compare with PSW_OVR field of IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD. + * + * those power domains are mutually exclusive. + */ + reg_ext_rgmii: regulator-ext-rgmii { + compatible = "regulator-fixed"; + power-domains = <&pd IMX_SC_R_BOARD_R1>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_EXT_RGMII (LDO1)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3"; + }; + + reg_module_3v3_avdd: regulator-module-3v3-avdd { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_AUDIO"; + }; + + reg_module_wifi: regulator-module-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pdn>; + gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "wifi_pwrdn_fake_regulator"; + regulator-settling-time-us = <100>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_pcie_switch: regulator-pcie-switch { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio7>; + gpio = <&lsio_gpio3 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "pcie_switch"; + startup-delay-us = <100000>; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_en>; + /* Apalis USBH_EN */ + gpio = <&lsio_gpio4 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb-host-vbus"; + }; + + reg_usb_hsic: regulator-usb-hsic { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "usb-hsic-dummy"; + }; + + reg_usb_phy: regulator-usb-hsic1 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "usb-phy-dummy"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + decoder_boot: decoder-boot@84000000 { + reg = <0 0x84000000 0 0x2000000>; + no-map; + }; + + encoder1_boot: encoder1-boot@86000000 { + reg = <0 0x86000000 0 0x200000>; + no-map; + }; + + encoder2_boot: encoder2-boot@86200000 { + reg = <0 0x86200000 0 0x200000>; + no-map; + }; + + /* + * reserved-memory layout + * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4 + * Shouldn't be used at A core and Linux side. + * + */ + m4_reserved: m4@88000000 { + reg = <0 0x88000000 0 0x8000000>; + no-map; + }; + + rpmsg_reserved: rpmsg@90200000 { + reg = <0 0x90200000 0 0x200000>; + no-map; + }; + + vdevbuffer: vdevbuffer@90400000 { + compatible = "shared-dma-pool"; + reg = <0 0x90400000 0 0x100000>; + no-map; + }; + + decoder_rpc: decoder-rpc@92000000 { + reg = <0 0x92000000 0 0x200000>; + no-map; + }; + + dsp_reserved: dsp@92400000 { + reg = <0 0x92400000 0 0x2000000>; + no-map; + }; + + encoder1_rpc: encoder1-rpc@94400000 { + reg = <0 0x94400000 0 0x700000>; + no-map; + }; + + encoder2_rpc: encoder2-rpc@94b00000 { + reg = <0 0x94b00000 0 0x700000>; + no-map; + }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0xc0000000 0 0x3c000000>; + linux,cma-default; + reusable; + size = <0 0x3c000000>; + }; + }; + + /* TODO: Apalis Analogue Audio */ + + /* TODO: HDMI Audio */ + + /* TODO: Apalis SPDIF1 */ + + touchscreen: touchscreen { + compatible = "toradex,vf50-touchscreen"; + interrupt-parent = <&lsio_gpio3>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "idle", "default"; + pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>; + pinctrl-1 = <&pinctrl_adc1>, <&pinctrl_touchctrl_gpios>; + io-channels = <&adc1 2>, <&adc1 1>, + <&adc1 0>, <&adc1 3>; + vf50-ts-min-pressure = <200>; + xp-gpios = <&lsio_gpio2 4 GPIO_ACTIVE_LOW>; + xm-gpios = <&lsio_gpio2 5 GPIO_ACTIVE_HIGH>; + yp-gpios = <&lsio_gpio2 17 GPIO_ACTIVE_LOW>; + ym-gpios = <&lsio_gpio2 21 GPIO_ACTIVE_HIGH>; + /* + * NOTE: you must remove the pinctrl-adc1 from the adc1 + * node below to use the touchscreen + */ + status = "disabled"; + }; + +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0>; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; +}; + +/* TODO: Asynchronous Sample Rate Converter (ASRC) */ + +/* Apalis ETH1 */ +&fec1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + fsl,magic-packet; + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + interrupt-parent = <&lsio_gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + reset-assert-us = <2>; + reset-deassert-us = <2>; + reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>; + reset-names = "phy-reset"; + }; + }; +}; + +/* Apalis CAN1 */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +/* Apalis CAN2 */ +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; +}; + +/* Apalis CAN3 (optional) */ +&flexcan3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan3>; +}; + +/* TODO: Apalis HDMI1 */ + +/* On-module I2C */ +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + status = "okay"; + + /* TODO: Audio Codec */ + + /* USB3503A */ + usb-hub@8 { + compatible = "smsc,usb3503a"; + reg = <0x08>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3503a>; + connect-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + intn-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>; + refclk-frequency = <25000000>; + reset-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_LOW>; + }; +}; + +/* Apalis I2C1 */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + + atmel_mxt_ts: touch@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&lsio_gpio4>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* Apalis GPIO5 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpio6>; + reset-gpios = <&lsio_gpio4 2 GPIO_ACTIVE_LOW>; /* Apalis GPIO6 */ + status = "disabled"; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + status = "disabled"; + }; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; +}; + +&jpegdec { + status = "okay"; +}; + +&jpegenc { + status = "okay"; +}; + +/* TODO: Apalis LVDS1 */ + +/* Apalis SPI1 */ +&lpspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi0>; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&lsio_gpio3 5 GPIO_ACTIVE_LOW>; +}; + +/* Apalis SPI2 */ +&lpspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi2>; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>; +}; + +/* Apalis UART3 */ +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; +}; + +/* Apalis UART1 */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; +}; + +/* Apalis UART4 */ +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; +}; + +/* Apalis UART2 */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; +}; + +&lsio_gpio0 { + gpio-line-names = "MXM3_279", + "MXM3_277", + "MXM3_135", + "MXM3_203", + "MXM3_201", + "MXM3_275", + "MXM3_110", + "MXM3_120", + "MXM3_1/GPIO1", + "MXM3_3/GPIO2", + "MXM3_124", + "MXM3_122", + "MXM3_5/GPIO3", + "MXM3_7/GPIO4", + "", + "", + "MXM3_4", + "MXM3_211", + "MXM3_209", + "MXM3_2", + "MXM3_136", + "MXM3_134", + "MXM3_6", + "MXM3_8", + "MXM3_112", + "MXM3_118", + "MXM3_114", + "MXM3_116"; +}; + +&lsio_gpio1 { + gpio-line-names = "", + "", + "", + "", + "MXM3_286", + "", + "MXM3_87", + "MXM3_99", + "MXM3_138", + "MXM3_140", + "MXM3_239", + "", + "MXM3_281", + "MXM3_283", + "MXM3_126", + "MXM3_132", + "", + "", + "", + "", + "MXM3_173", + "MXM3_175", + "MXM3_123"; + + hdmi-ctrl-hog { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_ctrl>; + gpio-hog; + gpios = <30 GPIO_ACTIVE_HIGH>; + line-name = "CONNECTOR_IS_HDMI"; + /* Set signals depending on HDP device type, 0 DP, 1 HDMI */ + output-high; + }; +}; + +&lsio_gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "MXM3_198", + "MXM3_35", + "MXM3_164", + "", + "", + "", + "", + "MXM3_217", + "MXM3_215", + "", + "", + "MXM3_193", + "MXM3_194", + "MXM3_37", + "", + "MXM3_271", + "MXM3_273", + "MXM3_195", + "MXM3_197", + "MXM3_177", + "MXM3_179", + "MXM3_181", + "MXM3_183", + "MXM3_185", + "MXM3_187"; + + /* + * Add GPIO2_20 as a wakeup source: + * Pin: 101 SC_P_SPI3_CS0 (MXM3_37/WAKE1_MICO) + * Type: 5 SC_PAD_WAKEUP_FALL_EDGE + * Line: 20 + */ + pad-wakeup = <IMX8QM_SPI3_CS0 5 20>; + pad-wakeup-num = <1>; + + pcie-wifi-hog { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_wifi_refclk>; + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + line-name = "PCIE_WIFI_CLK"; + output-high; + }; +}; + +&lsio_gpio3 { + gpio-line-names = "MXM3_191", + "", + "MXM3_221", + "MXM3_225", + "MXM3_223", + "MXM3_227", + "MXM3_200", + "MXM3_235", + "MXM3_231", + "MXM3_229", + "MXM3_233", + "MXM3_204", + "MXM3_196", + "", + "MXM3_202", + "", + "", + "", + "MXM3_305", + "MXM3_307", + "MXM3_309", + "MXM3_311", + "MXM3_315", + "MXM3_317", + "MXM3_319", + "MXM3_321", + "MXM3_15/GPIO7", + "MXM3_63", + "MXM3_17/GPIO8", + "MXM3_12", + "MXM3_14", + "MXM3_16"; +}; + +&lsio_gpio4 { + gpio-line-names = "MXM3_18", + "MXM3_11/GPIO5", + "MXM3_13/GPIO6", + "MXM3_274", + "MXM3_84", + "MXM3_262", + "MXM3_96", + "", + "", + "", + "", + "", + "MXM3_190", + "", + "", + "", + "MXM3_269", + "MXM3_251", + "MXM3_253", + "MXM3_295", + "MXM3_299", + "MXM3_301", + "MXM3_297", + "MXM3_293", + "MXM3_291", + "MXM3_289", + "MXM3_287"; + + /* Enable pcie root / sata ref clock unconditionally */ + pcie-sata-hog { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_sata_refclk>; + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + line-name = "PCIE_SATA_CLK"; + output-high; + }; +}; + +&lsio_gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MXM3_150", + "MXM3_160", + "MXM3_162", + "MXM3_144", + "MXM3_146", + "MXM3_148", + "MXM3_152", + "MXM3_156", + "MXM3_158", + "MXM3_159", + "MXM3_184", + "MXM3_180", + "MXM3_186", + "MXM3_188", + "MXM3_176", + "MXM3_178"; +}; + +&lsio_gpio6 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MXM3_261", + "MXM3_263", + "MXM3_259", + "MXM3_257", + "MXM3_255", + "MXM3_128", + "MXM3_130", + "MXM3_265", + "MXM3_249", + "MXM3_247", + "MXM3_245", + "MXM3_243"; +}; + +/* Apalis PWM3, MXM3 pin 6 */ +&lsio_pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; + #pwm-cells = <3>; +}; + +/* Apalis PWM4, MXM3 pin 8 */ +&lsio_pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + #pwm-cells = <3>; +}; + +/* Apalis PWM1, MXM3 pin 2 */ +&lsio_pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + #pwm-cells = <3>; +}; + +/* Apalis PWM2, MXM3 pin 4 */ +&lsio_pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + #pwm-cells = <3>; +}; + +/* Messaging Units */ +&mu_m0{ + status = "okay"; +}; + +&mu1_m0{ + status = "okay"; +}; + +&mu2_m0{ + status = "okay"; +}; + +/* TODO: Apalis PCIE1 */ + +/* TODO: On-module Wi-Fi */ + +/* TODO: Apalis BKL1_PWM */ + +/* TODO: Apalis DAP1 */ + +/* TODO: Analogue Audio */ + +/* TODO: Apalis SATA1 */ + +/* TODO: Apalis SPDIF1 */ + +/* TODO: Thermal Zones */ + +/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ + +/* TODO: Apalis USBH4 */ + +/* Apalis USBO1 */ +&usbphy1 { + phy-3p0-supply = <®_usb_phy>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + adp-disable; + hnp-disable; + over-current-active-low; + power-active-high; + srp-disable; +}; + +/* On-module eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2_4bit>, + <&pinctrl_usdhc2_8bit>, + <&pinctrl_mmc1_cd>; + pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, + <&pinctrl_usdhc2_8bit_100mhz>, + <&pinctrl_mmc1_cd>; + pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, + <&pinctrl_usdhc2_8bit_200mhz>, + <&pinctrl_mmc1_cd>; + pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, + <&pinctrl_usdhc2_8bit_sleep>, + <&pinctrl_mmc1_cd_sleep>; + bus-width = <8>; + cd-gpios = <&lsio_gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */ + no-1-8-v; +}; + +/* Apalis SD1 */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_sd1_cd>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_sd1_cd>; + bus-width = <4>; + cd-gpios = <&lsio_gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */ + no-1-8-v; +}; + +/* Video Processing Unit */ +&vpu { + compatible = "nxp,imx8qm-vpu"; + status = "okay"; +}; + +&vpu_core0 { + reg = <0x2d080000 0x10000>; + memory-region = <&decoder_boot>, <&decoder_rpc>; + status = "okay"; +}; + +&vpu_core1 { + reg = <0x2d090000 0x10000>; + memory-region = <&encoder1_boot>, <&encoder1_rpc>; + status = "okay"; +}; + +&vpu_core2 { + reg = <0x2d0a0000 0x10000>; + memory-region = <&encoder2_boot>, <&encoder2_rpc>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, + <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_keys>, + <&pinctrl_gpio_usbh_oc_n>, <&pinctrl_lpuart1ctrl>, + <&pinctrl_lvds0_i2c0_gpio>, <&pinctrl_lvds1_i2c0_gpios>, + <&pinctrl_mipi_dsi_0_1_en>, <&pinctrl_mipi_dsi1_gpios>, + <&pinctrl_mlb_gpios>, <&pinctrl_qspi1a_gpios>, + <&pinctrl_sata1_act>, <&pinctrl_sim0_gpios>, + <&pinctrl_usdhc1_gpios>; + + /* Apalis AN1_ADC */ + pinctrl_adc0: adc0grp { + fsl,pins = /* Apalis AN1_ADC0 */ + <IMX8QM_ADC_IN0_DMA_ADC0_IN0 0xc0000060>, + /* Apalis AN1_ADC1 */ + <IMX8QM_ADC_IN1_DMA_ADC0_IN1 0xc0000060>, + /* Apalis AN1_ADC2 */ + <IMX8QM_ADC_IN2_DMA_ADC0_IN2 0xc0000060>, + /* Apalis AN1_TSWIP_ADC3 */ + <IMX8QM_ADC_IN3_DMA_ADC0_IN3 0xc0000060>; + }; + + /* Apalis AN1_TS */ + pinctrl_adc1: adc1grp { + fsl,pins = /* Apalis AN1_TSPX */ + <IMX8QM_ADC_IN4_DMA_ADC1_IN0 0xc0000060>, + /* Apalis AN1_TSMX */ + <IMX8QM_ADC_IN5_DMA_ADC1_IN1 0xc0000060>, + /* Apalis AN1_TSPY */ + <IMX8QM_ADC_IN6_DMA_ADC1_IN2 0xc0000060>, + /* Apalis AN1_TSMY */ + <IMX8QM_ADC_IN7_DMA_ADC1_IN3 0xc0000060>; + }; + + /* Apalis CAM1 */ + pinctrl_cam1_gpios: cam1gpiosgrp { + fsl,pins = /* Apalis CAM1_D7 */ + <IMX8QM_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20 0x00000021>, + /* Apalis CAM1_D6 */ + <IMX8QM_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21 0x00000021>, + /* Apalis CAM1_D5 */ + <IMX8QM_ESAI0_TX0_LSIO_GPIO2_IO26 0x00000021>, + /* Apalis CAM1_D4 */ + <IMX8QM_ESAI0_TX1_LSIO_GPIO2_IO27 0x00000021>, + /* Apalis CAM1_D3 */ + <IMX8QM_ESAI0_TX2_RX3_LSIO_GPIO2_IO28 0x00000021>, + /* Apalis CAM1_D2 */ + <IMX8QM_ESAI0_TX3_RX2_LSIO_GPIO2_IO29 0x00000021>, + /* Apalis CAM1_D1 */ + <IMX8QM_ESAI0_TX4_RX1_LSIO_GPIO2_IO30 0x00000021>, + /* Apalis CAM1_D0 */ + <IMX8QM_ESAI0_TX5_RX0_LSIO_GPIO2_IO31 0x00000021>, + /* Apalis CAM1_PCLK */ + <IMX8QM_MCLK_IN0_LSIO_GPIO3_IO00 0x00000021>, + /* Apalis CAM1_MCLK */ + <IMX8QM_SPI3_SDO_LSIO_GPIO2_IO18 0x00000021>, + /* Apalis CAM1_VSYNC */ + <IMX8QM_ESAI0_SCKR_LSIO_GPIO2_IO24 0x00000021>, + /* Apalis CAM1_HSYNC */ + <IMX8QM_ESAI0_SCKT_LSIO_GPIO2_IO25 0x00000021>; + }; + + /* Apalis DAP1 */ + pinctrl_dap1_gpios: dap1gpiosgrp { + fsl,pins = /* Apalis DAP1_MCLK */ + <IMX8QM_SPI3_SDI_LSIO_GPIO2_IO19 0x00000021>, + /* Apalis DAP1_D_OUT */ + <IMX8QM_SAI1_RXC_LSIO_GPIO3_IO12 0x00000021>, + /* Apalis DAP1_RESET */ + <IMX8QM_ESAI1_SCKT_LSIO_GPIO2_IO07 0x00000021>, + /* Apalis DAP1_BIT_CLK */ + <IMX8QM_SPI0_CS1_LSIO_GPIO3_IO06 0x00000021>, + /* Apalis DAP1_D_IN */ + <IMX8QM_SAI1_RXFS_LSIO_GPIO3_IO14 0x00000021>, + /* Apalis DAP1_SYNC */ + <IMX8QM_SPI2_CS1_LSIO_GPIO3_IO11 0x00000021>, + /* On-module Wi-Fi_I2S_EN# */ + <IMX8QM_ESAI1_TX5_RX0_LSIO_GPIO2_IO13 0x00000021>; + }; + + /* Apalis LCD1_G1+2 */ + pinctrl_esai0_gpios: esai0gpiosgrp { + fsl,pins = /* Apalis LCD1_G1 */ + <IMX8QM_ESAI0_FSR_LSIO_GPIO2_IO22 0x00000021>, + /* Apalis LCD1_G2 */ + <IMX8QM_ESAI0_FST_LSIO_GPIO2_IO23 0x00000021>; + }; + + /* On-module Gigabit Ethernet PHY Micrel KSZ9031 for Apalis GLAN */ + pinctrl_fec1: fec1grp { + fsl,pins = /* Use pads in 3.3V mode */ + <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>, + <IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020>, + <IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020>, + <IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020>, + <IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020>, + <IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020>, + <IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020>, + <IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M 0x06000020>, + /* On-module ETH_RESET# */ + <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020>, + /* On-module ETH_INT# */ + <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29 0x04000060>; + }; + + pinctrl_fec1_sleep: fec1-sleepgrp { + fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>, + <IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14 0x04000040>, + <IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13 0x04000040>, + <IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31 0x04000040>, + <IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03 0x04000040>, + <IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04 0x04000040>, + <IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09 0x04000040>, + <IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15 0x04000040>, + <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020>, + <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29 0x04000040>; + }; + + /* Apalis LCD1_ */ + pinctrl_fec2_gpios: fec2gpiosgrp { + fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0>, + /* Apalis LCD1_R1 */ + <IMX8QM_ENET1_MDC_LSIO_GPIO4_IO18 0x00000021>, + /* Apalis LCD1_R0 */ + <IMX8QM_ENET1_MDIO_LSIO_GPIO4_IO17 0x00000021>, + /* Apalis LCD1_G0 */ + <IMX8QM_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16 0x00000021>, + /* Apalis LCD1_R7 */ + <IMX8QM_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17 0x00000021>, + /* Apalis LCD1_DE */ + <IMX8QM_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18 0x00000021>, + /* Apalis LCD1_HSYNC */ + <IMX8QM_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19 0x00000021>, + /* Apalis LCD1_VSYNC */ + <IMX8QM_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20 0x00000021>, + /* Apalis LCD1_PCLK */ + <IMX8QM_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21 0x00000021>, + /* Apalis LCD1_R6 */ + <IMX8QM_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11 0x00000021>, + /* Apalis LCD1_R5 */ + <IMX8QM_ENET1_RGMII_TXC_LSIO_GPIO6_IO10 0x00000021>, + /* Apalis LCD1_R4 */ + <IMX8QM_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12 0x00000021>, + /* Apalis LCD1_R3 */ + <IMX8QM_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13 0x00000021>, + /* Apalis LCD1_R2 */ + <IMX8QM_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14 0x00000021>; + }; + + /* Apalis CAN1 */ + pinctrl_flexcan1: flexcan0grp { + fsl,pins = <IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x00000021>, + <IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX 0x00000021>; + }; + + /* Apalis CAN2 */ + pinctrl_flexcan2: flexcan1grp { + fsl,pins = <IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX 0x00000021>, + <IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX 0x00000021>; + }; + + /* Apalis CAN3 (optional) */ + pinctrl_flexcan3: flexcan2grp { + fsl,pins = <IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX 0x00000021>, + <IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX 0x00000021>; + }; + + /* Apalis GPIO1 */ + pinctrl_gpio1: gpio1grp { + fsl,pins = <IMX8QM_M40_GPIO0_00_LSIO_GPIO0_IO08 0x06000021>; + }; + + /* Apalis GPIO2 */ + pinctrl_gpio2: gpio2grp { + fsl,pins = <IMX8QM_M40_GPIO0_01_LSIO_GPIO0_IO09 0x06000021>; + }; + + /* Apalis GPIO3 */ + pinctrl_gpio3: gpio3grp { + fsl,pins = <IMX8QM_M41_GPIO0_00_LSIO_GPIO0_IO12 0x06000021>; + }; + + /* Apalis GPIO4 */ + pinctrl_gpio4: gpio4grp { + fsl,pins = <IMX8QM_M41_GPIO0_01_LSIO_GPIO0_IO13 0x06000021>; + }; + + /* Apalis GPIO5 */ + pinctrl_gpio5: gpio5grp { + fsl,pins = <IMX8QM_FLEXCAN2_RX_LSIO_GPIO4_IO01 0x06000021>; + }; + + /* Apalis GPIO6 */ + pinctrl_gpio6: gpio6grp { + fsl,pins = <IMX8QM_FLEXCAN2_TX_LSIO_GPIO4_IO02 0x00000021>; + }; + + /* Apalis GPIO7 */ + pinctrl_gpio7: gpio7grp { + fsl,pins = <IMX8QM_MLB_SIG_LSIO_GPIO3_IO26 0x00000021>; + }; + + /* Apalis GPIO8 */ + pinctrl_gpio8: gpio8grp { + fsl,pins = <IMX8QM_MLB_DATA_LSIO_GPIO3_IO28 0x00000021>; + }; + + /* Apalis BKL1_ON */ + pinctrl_gpio_bkl_on: gpiobklongrp { + fsl,pins = <IMX8QM_LVDS0_GPIO00_LSIO_GPIO1_IO04 0x00000021>; + }; + + /* Apalis WAKE1_MICO */ + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = <IMX8QM_SPI3_CS0_LSIO_GPIO2_IO20 0x06700021>; + }; + + /* Apalis USBH_OC# */ + pinctrl_gpio_usbh_oc_n: gpiousbhocngrp { + fsl,pins = <IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06 0x04000021>; + }; + + /* On-module HDMI_CTRL */ + pinctrl_hdmi_ctrl: hdmictrlgrp { + fsl,pins = <IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30 0x00000061>; + }; + + /* On-module I2C */ + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = <IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x04000020>, + <IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA 0x04000020>; + }; + + /* Apalis I2C1 */ + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = <IMX8QM_GPT1_CLK_DMA_I2C2_SCL 0x04000020>, + <IMX8QM_GPT1_CAPTURE_DMA_I2C2_SDA 0x04000020>; + }; + + /* Apalis I2C3 (CAM) */ + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = <IMX8QM_SIM0_PD_DMA_I2C3_SCL 0x04000020>, + <IMX8QM_SIM0_POWER_EN_DMA_I2C3_SDA 0x04000020>; + }; + + /* Apalis SPI1 */ + pinctrl_lpspi0: lpspi0grp { + fsl,pins = <IMX8QM_SPI0_SCK_DMA_SPI0_SCK 0x0600004c>, + <IMX8QM_SPI0_SDO_DMA_SPI0_SDO 0x0600004c>, + <IMX8QM_SPI0_SDI_DMA_SPI0_SDI 0x0600004c>, + <IMX8QM_SPI0_CS0_LSIO_GPIO3_IO05 0x0600004c>; + }; + + /* Apalis SPI2 */ + pinctrl_lpspi2: lpspi2grp { + fsl,pins = <IMX8QM_SPI2_SCK_DMA_SPI2_SCK 0x0600004c>, + <IMX8QM_SPI2_SDO_DMA_SPI2_SDO 0x0600004c>, + <IMX8QM_SPI2_SDI_DMA_SPI2_SDI 0x0600004c>, + <IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10 0x0600004c>; + }; + + /* Apalis UART3 */ + pinctrl_lpuart0: lpuart0grp { + fsl,pins = <IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020>, + <IMX8QM_UART0_TX_DMA_UART0_TX 0x06000020>; + }; + + /* Apalis UART1 */ + pinctrl_lpuart1: lpuart1grp { + fsl,pins = <IMX8QM_UART1_RX_DMA_UART1_RX 0x06000020>, + <IMX8QM_UART1_TX_DMA_UART1_TX 0x06000020>, + <IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B 0x06000020>, + <IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B 0x06000020>; + }; + + /* Apalis UART1 */ + pinctrl_lpuart1ctrl: lpuart1ctrlgrp { + fsl,pins = /* Apalis UART1_DTR */ + <IMX8QM_M40_I2C0_SCL_LSIO_GPIO0_IO06 0x00000021>, + /* Apalis UART1_DSR */ + <IMX8QM_M40_I2C0_SDA_LSIO_GPIO0_IO07 0x00000021>, + /* Apalis UART1_DCD */ + <IMX8QM_M41_I2C0_SCL_LSIO_GPIO0_IO10 0x00000021>, + /* Apalis UART1_RI */ + <IMX8QM_M41_I2C0_SDA_LSIO_GPIO0_IO11 0x00000021>; + }; + + /* Apalis UART4 */ + pinctrl_lpuart2: lpuart2grp { + fsl,pins = <IMX8QM_LVDS0_I2C1_SCL_DMA_UART2_TX 0x06000020>, + <IMX8QM_LVDS0_I2C1_SDA_DMA_UART2_RX 0x06000020>; + }; + + /* Apalis UART2 */ + pinctrl_lpuart3: lpuart3grp { + fsl,pins = <IMX8QM_LVDS1_I2C1_SCL_DMA_UART3_TX 0x06000020>, + <IMX8QM_LVDS1_I2C1_SDA_DMA_UART3_RX 0x06000020>, + <IMX8QM_ENET1_RGMII_TXD3_DMA_UART3_RTS_B 0x06000020>, + <IMX8QM_ENET1_RGMII_RXC_DMA_UART3_CTS_B 0x06000020>; + }; + + /* Apalis TS_2 */ + pinctrl_lvds0_i2c0_gpio: lvds0i2c0gpiogrp { + fsl,pins = <IMX8QM_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06 0x00000021>; + }; + + /* Apalis LCD1_G6+7 */ + pinctrl_lvds1_i2c0_gpios: lvds1i2c0gpiosgrp { + fsl,pins = /* Apalis LCD1_G6 */ + <IMX8QM_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12 0x00000021>, + /* Apalis LCD1_G7 */ + <IMX8QM_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13 0x00000021>; + }; + + /* Apalis TS_3 */ + pinctrl_mipi_dsi_0_1_en: mipidsi0-1engrp { + fsl,pins = <IMX8QM_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07 0x00000021>; + }; + + /* Apalis TS_4 */ + pinctrl_mipi_dsi1_gpios: mipidsi1gpiosgrp { + fsl,pins = <IMX8QM_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22 0x00000021>; + }; + + /* Apalis TS_1 */ + pinctrl_mlb_gpios: mlbgpiosgrp { + fsl,pins = <IMX8QM_MLB_CLK_LSIO_GPIO3_IO27 0x00000021>; + }; + + /* Apalis MMC1_CD# */ + pinctrl_mmc1_cd: mmc1cdgrp { + fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09 0x00000021>; + }; + + pinctrl_mmc1_cd_sleep: mmc1cdsleepgrp { + fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09 0x04000021>; + }; + + /* On-module PCIe_Wi-Fi */ + pinctrl_pcieb: pciebgrp { + fsl,pins = <IMX8QM_PCIE_CTRL1_CLKREQ_B_LSIO_GPIO4_IO30 0x00000021>, + <IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31 0x00000021>, + <IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00 0x00000021>; + }; + + /* On-module PCIe_CLK_EN1 */ + pinctrl_pcie_sata_refclk: pciesatarefclkgrp { + fsl,pins = <IMX8QM_USDHC2_WP_LSIO_GPIO4_IO11 0x00000021>; + }; + + /* On-module PCIe_CLK_EN2 */ + pinctrl_pcie_wifi_refclk: pciewifirefclkgrp { + fsl,pins = <IMX8QM_ESAI1_TX3_RX2_LSIO_GPIO2_IO11 0x00000021>; + }; + + /* Apalis PWM3 */ + pinctrl_pwm0: pwm0grp { + fsl,pins = <IMX8QM_UART0_RTS_B_LSIO_PWM0_OUT 0x00000020>; + }; + + /* Apalis PWM4 */ + pinctrl_pwm1: pwm1grp { + fsl,pins = <IMX8QM_UART0_CTS_B_LSIO_PWM1_OUT 0x00000020>; + }; + + /* Apalis PWM1 */ + pinctrl_pwm2: pwm2grp { + fsl,pins = <IMX8QM_GPT1_COMPARE_LSIO_PWM2_OUT 0x00000020>; + }; + + /* Apalis PWM2 */ + pinctrl_pwm3: pwm3grp { + fsl,pins = <IMX8QM_GPT0_COMPARE_LSIO_PWM3_OUT 0x00000020>; + }; + + /* Apalis BKL1_PWM */ + pinctrl_pwm_bkl: pwmbklgrp { + fsl,pins = <IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT 0x00000020>; + }; + + /* Apalis LCD1_ */ + pinctrl_qspi1a_gpios: qspi1agpiosgrp { + fsl,pins = /* Apalis LCD1_B0 */ + <IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26 0x00000021>, + /* Apalis LCD1_B1 */ + <IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25 0x00000021>, + /* Apalis LCD1_B2 */ + <IMX8QM_QSPI1A_DATA2_LSIO_GPIO4_IO24 0x00000021>, + /* Apalis LCD1_B3 */ + <IMX8QM_QSPI1A_DATA3_LSIO_GPIO4_IO23 0x00000021>, + /* Apalis LCD1_B5 */ + <IMX8QM_QSPI1A_DQS_LSIO_GPIO4_IO22 0x00000021>, + /* Apalis LCD1_B7 */ + <IMX8QM_QSPI1A_SCLK_LSIO_GPIO4_IO21 0x00000021>, + /* Apalis LCD1_B4 */ + <IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19 0x00000021>, + /* Apalis LCD1_B6 */ + <IMX8QM_QSPI1A_SS1_B_LSIO_GPIO4_IO20 0x00000021>; + }; + + /* On-module RESET_MOCI#_DRV */ + pinctrl_reset_moci: resetmocigrp { + fsl,pins = <IMX8QM_SCU_GPIO0_02_LSIO_GPIO0_IO30 0x00000021>; + }; + + /* On-module I2S SGTL5000 for Apalis Analogue Audio */ + pinctrl_sai1: sai1grp { + fsl,pins = <IMX8QM_SAI1_TXD_AUD_SAI1_TXD 0xc600006c>, + <IMX8QM_SAI1_RXD_AUD_SAI1_RXD 0xc600004c>, + <IMX8QM_SAI1_TXC_AUD_SAI1_TXC 0xc600004c>, + <IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS 0xc600004c>; + }; + + /* Apalis SATA1_ACT# */ + pinctrl_sata1_act: sata1actgrp { + fsl,pins = <IMX8QM_ESAI1_TX0_LSIO_GPIO2_IO08 0x00000021>; + }; + + /* Apalis SD1_CD# */ + pinctrl_sd1_cd: sd1cdgrp { + fsl,pins = <IMX8QM_USDHC2_CD_B_LSIO_GPIO4_IO12 0x00000021>; + }; + + /* On-module I2S SGTL5000 SYS_MCLK */ + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = <IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0 0xc600004c>; + }; + + /* Apalis LCD1_ */ + pinctrl_sim0_gpios: sim0gpiosgrp { + fsl,pins = /* Apalis LCD1_G5 */ + <IMX8QM_SIM0_CLK_LSIO_GPIO0_IO00 0x00000021>, + /* Apalis LCD1_G3 */ + <IMX8QM_SIM0_GPIO0_00_LSIO_GPIO0_IO05 0x00000021>, + /* Apalis TS_5 */ + <IMX8QM_SIM0_IO_LSIO_GPIO0_IO02 0x00000021>, + /* Apalis LCD1_G4 */ + <IMX8QM_SIM0_RST_LSIO_GPIO0_IO01 0x00000021>; + }; + + /* Apalis SPDIF */ + pinctrl_spdif0: spdif0grp { + fsl,pins = <IMX8QM_SPDIF0_TX_AUD_SPDIF0_TX 0xc6000040>, + <IMX8QM_SPDIF0_RX_AUD_SPDIF0_RX 0xc6000040>; + }; + + pinctrl_touchctrl_gpios: touchctrlgpiosgrp { + fsl,pins = <IMX8QM_ESAI1_FSR_LSIO_GPIO2_IO04 0x00000021>, + <IMX8QM_ESAI1_FST_LSIO_GPIO2_IO05 0x00000041>, + <IMX8QM_SPI3_SCK_LSIO_GPIO2_IO17 0x00000021>, + <IMX8QM_SPI3_CS1_LSIO_GPIO2_IO21 0x00000041>; + }; + + pinctrl_touchctrl_idle: touchctrlidlegrp { + fsl,pins = <IMX8QM_ADC_IN4_LSIO_GPIO3_IO22 0x00000021>, + <IMX8QM_ADC_IN5_LSIO_GPIO3_IO23 0x00000021>, + <IMX8QM_ADC_IN6_LSIO_GPIO3_IO24 0x00000021>, + <IMX8QM_ADC_IN7_LSIO_GPIO3_IO25 0x00000021>; + }; + + /* On-module USB HSIC HUB (active) */ + pinctrl_usb_hsic_active: usbh1activegrp { + fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA 0x000000cf>, + <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE 0x000000ff>; + }; + + /* On-module USB HSIC HUB (idle) */ + pinctrl_usb_hsic_idle: usbh1idlegrp { + fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA 0x000000cf>, + <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE 0x000000cf>; + }; + + /* On-module USB HSIC HUB */ + pinctrl_usb3503a: usb3503agrp { + fsl,pins = /* On-module HSIC_HUB_CONNECT */ + <IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x00000041>, + /* On-module HSIC_INT_N */ + <IMX8QM_SCU_GPIO0_05_LSIO_GPIO1_IO01 0x00000021>, + /* On-module HSIC_RESET_N */ + <IMX8QM_SCU_GPIO0_06_LSIO_GPIO1_IO02 0x00000041>; + }; + + /* Apalis USBH_EN */ + pinctrl_usbh_en: usbhengrp { + fsl,pins = <IMX8QM_USB_SS3_TC1_LSIO_GPIO4_IO04 0x00000021>; + }; + + /* Apalis USBO1 */ + pinctrl_usbotg1: usbotg1grp { + fsl,pins = /* Apalis USBO1_EN */ + <IMX8QM_USB_SS3_TC0_CONN_USB_OTG1_PWR 0x00000021>, + /* Apalis USBO1_OC# */ + <IMX8QM_USB_SS3_TC2_CONN_USB_OTG1_OC 0x04000021>; + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041>, + <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021>, + <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021>, + <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021>, + <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021>, + <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021>, + <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021>, + <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021>, + <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021>, + <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021>, + <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000041>, + <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021>; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040>, + <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020>, + <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020>, + <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020>, + <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020>, + <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020>, + <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020>, + <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020>, + <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020>, + <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020>, + <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040>, + <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020>; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040>, + <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020>, + <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020>, + <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020>, + <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020>, + <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020>, + <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020>, + <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020>, + <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020>, + <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020>, + <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040>, + <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020>; + }; + + /* Apalis TS_6 */ + pinctrl_usdhc1_gpios: usdhc1gpiosgrp { + fsl,pins = <IMX8QM_USDHC1_STROBE_LSIO_GPIO5_IO23 0x00000021>; + }; + + /* Apalis MMC1 */ + pinctrl_usdhc2_4bit: usdhc2grp4bitgrp { + fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, + <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021>, + <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021>, + <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021>, + <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021>, + <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021>, + /* On-module PMIC use */ + <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; + }; + + pinctrl_usdhc2_4bit_100mhz: usdhc2-4bit100mhzgrp { + fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040>, + <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020>, + <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020>, + <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020>, + <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020>, + <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020>, + /* On-module PMIC use */ + <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; + }; + + pinctrl_usdhc2_4bit_200mhz: usdhc2-4bit200mhzgrp { + fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040>, + <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020>, + <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020>, + <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020>, + <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020>, + <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020>, + /* On-module PMIC use */ + <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; + }; + + pinctrl_usdhc2_8bit: usdhc2grp8bitgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000021>, + <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000021>, + <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000021>, + <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000021>; + }; + + pinctrl_usdhc2_8bit_100mhz: usdhc2-8bit100mhzgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000020>, + <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000020>, + <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000020>, + <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000020>; + }; + + pinctrl_usdhc2_8bit_200mhz: usdhc2-8bit200mhzgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000020>, + <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000020>, + <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000020>, + <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000020>; + }; + + pinctrl_usdhc2_4bit_sleep: usdhc2-4bitsleepgrp { + fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x04000061>, + <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x04000061>, + <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x04000061>, + <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x04000061>, + <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x04000061>, + <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x04000061>, + /* On-module PMIC use */ + <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; + }; + + pinctrl_usdhc2_8bit_sleep: usdhc2-8bitsleepgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x04000061>, + <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x04000061>, + <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x04000061>, + <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x04000061>; + }; + + /* Apalis SD1 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041>, + <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021>, + <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021>, + <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021>, + <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021>, + <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021>, + /* On-module PMIC use */ + <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021>; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041>, + <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021>, + <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021>, + <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021>, + <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021>, + <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021>, + /* On-module PMIC use */ + <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021>; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041>, + <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021>, + <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021>, + <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021>, + <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021>, + <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021>, + /* On-module PMIC use */ + <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021>; + }; + + /* On-module Wi-Fi */ + pinctrl_wifi: wifigrp { + fsl,pins = /* On-module Wi-Fi_SUSCLK_32k */ + <IMX8QM_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x06000021>, + /* On-module Wi-Fi_PCIE_W_DISABLE */ + <IMX8QM_MIPI_CSI0_MCLK_OUT_LSIO_GPIO1_IO24 0x06000021>; + }; + + pinctrl_wifi_pdn: wifipdngrp { + fsl,pins = /* On-module Wi-Fi_POWER_DOWN */ + <IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28 0x06000021>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index 4852760adeee..b32c2e199c16 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -138,6 +138,53 @@ conn_subsys: bus@5b000000 { status = "disabled"; }; + usbotg3: usb@5b110000 { + compatible = "fsl,imx8qm-usb3"; + reg = <0x5b110000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&usb3_lpcg IMX_LPCG_CLK_1>, + <&usb3_lpcg IMX_LPCG_CLK_0>, + <&usb3_lpcg IMX_LPCG_CLK_7>, + <&usb3_lpcg IMX_LPCG_CLK_4>, + <&usb3_lpcg IMX_LPCG_CLK_5>; + clock-names = "lpm", "bus", "aclk", "ipg", "core"; + assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + assigned-clock-rates = <250000000>; + power-domains = <&pd IMX_SC_R_USB_2>; + status = "disabled"; + + usbotg3_cdns3: usb@5b120000 { + compatible = "cdns,usb3"; + reg = <0x5b130000 0x10000>, /* memory area for HOST registers */ + <0x5b140000 0x10000>, /* memory area for DEVICE registers */ + <0x5b120000 0x10000>; /* memory area for OTG/DRD registers */ + reg-names = "xhci", "dev", "otg"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg", "wakeup"; + phys = <&usb3_phy>; + phy-names = "cdns3,usb3-phy"; + status = "disabled"; + }; + }; + + usb3_phy: usb-phy@5b160000 { + compatible = "nxp,salvo-phy"; + reg = <0x5b160000 0x40000>; + clocks = <&usb3_lpcg IMX_LPCG_CLK_6>; + clock-names = "salvo_phy_clk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + #phy-cells = <0>; + status = "disabled"; + }; + /* LPCG clocks */ sdhc0_lpcg: clock-controller@5b200000 { compatible = "fsl,imx8qxp-lpcg"; @@ -234,4 +281,26 @@ conn_subsys: bus@5b000000 { clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk"; power-domains = <&pd IMX_SC_R_USB_0_PHY>; }; + + usb3_lpcg: clock-controller@5b280000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b280000 0x10000>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; + clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>, + <&conn_ipg_clk>, + <&conn_ipg_clk>, + <&conn_ipg_clk>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + clock-output-names = "usb3_app_clk", + "usb3_lpm_clk", + "usb3_ipg_clk", + "usb3_core_pclk", + "usb3_phy_clk", + "usb3_aclk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index a943a1e2797f..2dce8f2ee3ea 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -31,7 +31,7 @@ dma_subsys: bus@5a000000 { <&spi0_lpcg 1>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>; - assigned-clock-rates = <20000000>; + assigned-clock-rates = <60000000>; power-domains = <&pd IMX_SC_R_SPI_0>; status = "disabled"; }; @@ -270,6 +270,7 @@ dma_subsys: bus@5a000000 { adc0: adc@5a880000 { compatible = "nxp,imx8qxp-adc"; + #io-channel-cells = <1>; reg = <0x5a880000 0x10000>; interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; @@ -284,6 +285,7 @@ dma_subsys: bus@5a000000 { adc1: adc@5a890000 { compatible = "nxp,imx8qxp-adc"; + #io-channel-cells = <1>; reg = <0x5a890000 0x10000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; @@ -296,6 +298,65 @@ dma_subsys: bus@5a000000 { status = "disabled"; }; + flexcan1: can@5a8d0000 { + compatible = "fsl,imx8qm-flexcan"; + reg = <0x5a8d0000 0x10000>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&can0_lpcg 1>, + <&can0_lpcg 0>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <40000000>; + power-domains = <&pd IMX_SC_R_CAN_0>; + /* SLSlice[4] */ + fsl,clk-source = /bits/ 8 <0>; + fsl,scu-index = /bits/ 8 <0>; + status = "disabled"; + }; + + flexcan2: can@5a8e0000 { + compatible = "fsl,imx8qm-flexcan"; + reg = <0x5a8e0000 0x10000>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + /* CAN0 clock and PD is shared among all CAN instances as + * CAN1 shares CAN0's clock and to enable CAN0's clock it + * has to be powered on. + */ + clocks = <&can0_lpcg 1>, + <&can0_lpcg 0>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <40000000>; + power-domains = <&pd IMX_SC_R_CAN_1>; + /* SLSlice[4] */ + fsl,clk-source = /bits/ 8 <0>; + fsl,scu-index = /bits/ 8 <1>; + status = "disabled"; + }; + + flexcan3: can@5a8f0000 { + compatible = "fsl,imx8qm-flexcan"; + reg = <0x5a8f0000 0x10000>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + /* CAN0 clock and PD is shared among all CAN instances as + * CAN2 shares CAN0's clock and to enable CAN0's clock it + * has to be powered on. + */ + clocks = <&can0_lpcg 1>, + <&can0_lpcg 0>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <40000000>; + power-domains = <&pd IMX_SC_R_CAN_2>; + /* SLSlice[4] */ + fsl,clk-source = /bits/ 8 <0>; + fsl,scu-index = /bits/ 8 <2>; + status = "disabled"; + }; + i2c0_lpcg: clock-controller@5ac00000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5ac00000 0x10000>; @@ -367,4 +428,17 @@ dma_subsys: bus@5a000000 { "adc1_lpcg_ipg_clk"; power-domains = <&pd IMX_SC_R_ADC_1>; }; + + can0_lpcg: clock-controller@5acd0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5acd0000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>, <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "can0_lpcg_pe_clk", + "can0_lpcg_ipg_clk", + "can0_lpcg_chi_clk"; + power-domains = <&pd IMX_SC_R_CAN_0>; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi index 1f3d225e64ec..ea8c93757521 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi @@ -28,6 +28,54 @@ lsio_subsys: bus@5d000000 { clock-output-names = "lsio_bus_clk"; }; + lsio_pwm0: pwm@5d000000 { + compatible = "fsl,imx27-pwm"; + reg = <0x5d000000 0x10000>; + clock-names = "ipg", "per"; + clocks = <&pwm0_lpcg 4>, + <&pwm0_lpcg 1>; + assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + lsio_pwm1: pwm@5d010000 { + compatible = "fsl,imx27-pwm"; + reg = <0x5d010000 0x10000>; + clock-names = "ipg", "per"; + clocks = <&pwm1_lpcg 4>, + <&pwm1_lpcg 1>; + assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + lsio_pwm2: pwm@5d020000 { + compatible = "fsl,imx27-pwm"; + reg = <0x5d020000 0x10000>; + clock-names = "ipg", "per"; + clocks = <&pwm2_lpcg 4>, + <&pwm2_lpcg 1>; + assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + lsio_pwm3: pwm@5d030000 { + compatible = "fsl,imx27-pwm"; + reg = <0x5d030000 0x10000>; + clock-names = "ipg", "per"; + clocks = <&pwm3_lpcg 4>, + <&pwm3_lpcg 1>; + assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + lsio_gpio0: gpio@5d080000 { reg = <0x5d080000 0x10000>; interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; @@ -117,7 +165,7 @@ lsio_subsys: bus@5d000000 { interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>; - clock-names = "fspi", "fspi_en"; + clock-names = "fspi_en", "fspi"; power-domains = <&pd IMX_SC_R_FSPI_0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 1bcf228a22b8..f542476187b3 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -121,8 +121,6 @@ phy-handle = <ðphy0>; nvmem-cells = <&fec_mac1>; nvmem-cell-names = "mac-address"; - snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; - snps,reset-delays-us = <10 20 200000>; status = "okay"; mdio { @@ -136,6 +134,9 @@ eee-broken-1000t; qca,disable-smarteee; qca,disable-hibernation-mode; + reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <20>; + reset-deassert-us = <200000>; vddio-supply = <&vddio0>; vddio0: vddio-regulator { @@ -276,7 +277,7 @@ }; &thermal_zones { - pmic-thermal0 { + pmic-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi index 214f21bd0cb4..70fadd79851a 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -130,8 +130,6 @@ clk: clock-controller { compatible = "fsl,imx8dxl-clk", "fsl,scu-clk"; #clock-cells = <2>; - clocks = <&xtal32k &xtal24m>; - clock-names = "xtal_32KHz", "xtal_24Mhz"; }; scu_gpio: gpio { @@ -188,7 +186,7 @@ }; thermal_zones: thermal-zones { - cpu-thermal0 { + cpu-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tsens IMX_SC_R_SYSTEM>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts index 6c079c0a3a48..010e836ebe5c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts @@ -28,7 +28,7 @@ }; &iomuxc { - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE 0x00000096 MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x00000096 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi index 3d859a350bd5..4e9e58acd262 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi @@ -124,7 +124,7 @@ >; }; - pinctrl_ecspi1_cs: ecspi1-cs { + pinctrl_ecspi1_cs: ecspi1cs-grp { fsl,pins = < MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40000 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40000 @@ -215,7 +215,7 @@ >; }; - pinctrl_pmic: pmic-irq { + pinctrl_pmic: pmicirq-grp { fsl,pins = < MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x41 >; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index d1a6390976a9..3f9dfd4d3884 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -194,7 +194,7 @@ rohm,reset-snvs-powered; #clock-cells = <0>; - clocks = <&osc_32k 0>; + clocks = <&osc_32k>; clock-output-names = "clk-32k-out"; regulators { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts index 6357078185ed..0e8f0d7161ad 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts @@ -247,7 +247,7 @@ compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&clk IMX8MM_CLK_SAI1_ROOT>; - clock-names = "mclk1"; + clock-names = "mclk"; wlf,shared-lrclk; #sound-dai-cells = <0>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts index 266129b4a70d..03e7679217b2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts @@ -168,6 +168,12 @@ "", "ECSPI1_SS0"; }; +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; +}; + /* PCIe */ &pcie0 { assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, @@ -333,6 +339,13 @@ >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c2 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c2 + >; + }; + pinctrl_leds: leds1grp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x16 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts index 9fbbbb556c0b..1eb1fe7ebde8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts @@ -264,7 +264,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 @@ -280,7 +280,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 88321b5b0693..6f0811587142 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -99,7 +99,7 @@ compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */ - off-on-delay = <500000>; + off-on-delay-us = <500000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_eth>; regulator-always-on; @@ -139,7 +139,7 @@ enable-active-high; /* Verdin SD_1_PWR_EN (SODIMM 76) */ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; - off-on-delay = <100000>; + off-on-delay-us = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 31f4548f85cf..ba06b5273b91 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -1119,6 +1119,61 @@ #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; + lcdif: lcdif@32e00000 { + compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif"; + reg = <0x32e00000 0x10000>; + clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, + <&clk IMX8MM_CLK_DISP_AXI>, + <&clk IMX8MM_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>, + <&clk IMX8MM_SYS_PLL2_1000M>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>; + status = "disabled"; + + port { + lcdif_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif>; + }; + }; + }; + + mipi_dsi: dsi@32e10000 { + compatible = "fsl,imx8mm-mipi-dsim"; + reg = <0x32e10000 0x400>; + clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, + <&clk IMX8MM_CLK_24M>; + assigned-clock-rates = <266000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif: endpoint { + remote-endpoint = <&lcdif_to_dsim>; + }; + }; + }; + }; + csi: csi@32e20000 { compatible = "fsl,imx8mm-csi", "fsl,imx7-csi"; reg = <0x32e20000 0x1000>; @@ -1315,6 +1370,30 @@ status = "disabled"; }; + pcie0_ep: pcie-ep@33800000 { + compatible = "fsl,imx8mm-pcie-ep"; + reg = <0x33800000 0x400000>, + <0x18000000 0x8000000>; + reg-names = "dbi", "addr_space"; + num-lanes = <1>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma"; + fsl,max-link-speed = <2>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, + <&clk IMX8MM_CLK_PCIE1_PHY>, + <&clk IMX8MM_CLK_PCIE1_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + num-ib-windows = <4>; + num-ob-windows = <4>; + status = "disabled"; + }; + gpu_3d: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x8000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi index c11895d9d582..8e100e71b8d2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi @@ -341,7 +341,7 @@ >; }; - pinctrl_pmic: pmicirq { + pinctrl_pmic: pmicirqgrp { fsl,pins = < MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x040 >; @@ -381,7 +381,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x094 MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d4 @@ -392,7 +392,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x096 MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d6 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts index 33f98582eace..7acc5a960dd9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts @@ -26,7 +26,7 @@ }; &iomuxc { - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE 0x00000096 MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x00000096 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts index fbbb3367037b..c6ad65becc97 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts @@ -136,7 +136,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000094 MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0d4 @@ -152,7 +152,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000096 MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0d6 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 8fef980c4ab2..1443857bfa5f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -389,7 +389,7 @@ >; }; - pinctrl_i2c2_gpio: i2c2grp-gpio { + pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16 0x1c3 MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17 0x1c3 @@ -403,7 +403,7 @@ >; }; - pinctrl_i2c3_gpio: i2c3grp-gpio { + pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = < MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18 0x1c3 MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0x1c3 diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index ed9ac6c5047c..c94ab45ee96c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -296,6 +296,7 @@ sai2: sai@30020000 { compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai"; reg = <0x30020000 0x10000>; + #sound-dai-cells = <0>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SAI2_IPG>, <&clk IMX8MN_CLK_DUMMY>, @@ -310,6 +311,7 @@ sai3: sai@30030000 { compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai"; reg = <0x30030000 0x10000>; + #sound-dai-cells = <0>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>, @@ -324,6 +326,7 @@ sai5: sai@30050000 { compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai"; reg = <0x30050000 0x10000>; + #sound-dai-cells = <0>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SAI5_IPG>, <&clk IMX8MN_CLK_DUMMY>, @@ -340,6 +343,7 @@ sai6: sai@30060000 { compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai"; reg = <0x30060000 0x10000>; + #sound-dai-cells = <0>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SAI6_IPG>, <&clk IMX8MN_CLK_DUMMY>, @@ -397,6 +401,7 @@ sai7: sai@300b0000 { compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai"; reg = <0x300b0000 0x10000>; + #sound-dai-cells = <0>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SAI7_IPG>, <&clk IMX8MN_CLK_DUMMY>, @@ -1057,6 +1062,61 @@ #size-cells = <1>; ranges; + lcdif: lcdif@32e00000 { + compatible = "fsl,imx8mn-lcdif", "fsl,imx6sx-lcdif"; + reg = <0x32e00000 0x10000>; + clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI>, + <&clk IMX8MN_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MN_CLK_DISP_PIXEL>, + <&clk IMX8MN_SYS_PLL2_1000M>, + <&clk IMX8MN_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>; + status = "disabled"; + + port { + lcdif_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif>; + }; + }; + }; + + mipi_dsi: dsi@32e10000 { + compatible = "fsl,imx8mn-mipi-dsim", "fsl,imx8mm-mipi-dsim"; + reg = <0x32e10000 0x400>; + clocks = <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, + <&clk IMX8MN_CLK_24M>; + assigned-clock-rates = <266000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif: endpoint { + remote-endpoint = <&lcdif_to_dsim>; + }; + }; + }; + }; + disp_blk_ctrl: blk-ctrl@32e28000 { compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon"; reg = <0x32e28000 0x100>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts new file mode 100644 index 000000000000..13674dc64be9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts @@ -0,0 +1,977 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include <dt-bindings/net/qca-ar803x.h> +#include "imx8mp.dtsi" + +/ { + model = "Data Modul i.MX8M Plus eDM SBC"; + compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp"; + + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + /* There are 1/2/4 GiB options, adjusted by bootloader. */ + reg = <0x0 0x40000000 0 0x40000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_backlight>; + brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + pwms = <&pwm1 0 5000000 0>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + clk_xtal25: clock-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + panel: panel { + /* Compatible string is filled in by panel board DT Overlay. */ + backlight = <&backlight>; + power-supply = <®_panel_vcc>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + reg_panel_vcc: regulator-panel-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_vcc_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "PANEL_VCC"; + /* GPIO flags are ignored, enable-active-high applies. */ + gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_3V3_SD"; + /* GPIO flags are ignored, enable-active-high applies. */ + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */ + enable-active-high; + off-on-delay-us = <12000>; + startup-delay-us = <100>; + vin-supply = <&buck4>; + }; + + watchdog { /* TPS3813 */ + compatible = "linux,wdt-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_watchdog_gpio>; + always-running; + gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + hw_algo = "level"; + /* Reset triggers in 2..3 seconds */ + hw_margin_ms = <1500>; + /* Disabled by default */ + status = "disabled"; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { /* W25Q128JVEI */ + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; /* Up to 133 MHz */ + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + +&ecspi2 { /* Feature connector SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + /* Disabled by default, unless feature board plugged in. */ + status = "disabled"; +}; + +&ecspi3 { /* Display connector SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&eqos { /* First ethernet */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-handle = <&phy_eqos>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8031 PHY */ + phy_eqos: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + /* + * Dedicated ENET_WOL# signal is unused, the PHY + * can wake the SoC up via INT signal as well. + */ + interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + qca,keep-pll-enabled; + vddio-supply = <&vddio_eqos>; + + vddio_eqos: vddio-regulator { + regulator-name = "VDDIO_EQOS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh_eqos: vddh-regulator { + regulator-name = "VDDH_EQOS"; + }; + }; + }; +}; + +&fec { /* Second ethernet */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-handle = <&phy_fec>; + phy-mode = "rgmii-id"; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8031 PHY */ + phy_fec: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + /* + * Dedicated ENET_WOL# signal is unused, the PHY + * can wake the SoC up via INT signal as well. + */ + interrupts-extended = <&gpio2 2 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + qca,keep-pll-enabled; + vddio-supply = <&vddio_fec>; + + vddio_fec: vddio-regulator { + regulator-name = "VDDIO_FEC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh_fec: vddh-regulator { + regulator-name = "VDDH_FEC"; + }; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&gpio1 { + gpio-line-names = + "", "USBHUB_RESET#", "WDOG_B#", "PMIC_INT#", + "", "M2_PCIE_RST#", "M2_PCIE_WAKE#", "GPIO5_IO03", + "GPIO5_IO04", "PDM_SEL", "ENET_WOL#", "ENET_INT#", + "", "", "", "ENET_RST#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "ENET2_INT#", "", "", "", "", "", + "WDOG_KICK#", "ENET2_RST#", "CAN_INT#", "RTC_IRQ#", + "", "", "", "", + "", "", "", "SD2_RESET#", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "", + "", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8", + "CSI2_PD_1V8", "CSI2_RESET_1V8#", "", "", + "", "", "EEPROM_WP_1V8#", "", "", "", "", "", + "MEMCFG0", "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", + "", "M2_W_DISABLE1_1V8#", + "M2_W_DISABLE2_1V8#", "", "I2C5_SCL_3V3", "I2C5_SDA_3V3", + "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "DSI_RESET_1V8#", "MEMCFG2", "", "MEMCFG1", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "GRAPHICS_PRSNT_1V8#", "DSI_IRQ_1V8#", + "", "DIS_USB_DN1", "DIS_USB_DN2", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "WDOG_EN", "", "", + "", "SPI1_CS#", "", "", + "", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3", + "I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3", + "", "", "", "", + "", "SPI3_CS#", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + usb-hub@2c { + compatible = "microchip,usb2514bi"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_hub>; + individual-port-switching; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + self-powered; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@68 { + compatible = "st,m41t62"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>; + }; + + pcieclk: clk@6a { + compatible = "renesas,9fgv0241"; + reg = <0x6a>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + /* + * i.MX 8M Plus Data Sheet for Consumer Products + * 3.1.4 Operating ranges + * MIMX8ML8CVNKZAB + */ + regulators { + buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */ + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <3125>; + regulator-always-on; + regulator-boot-on; + }; + + buck2: BUCK2 { /* VDD_ARM */ + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <3125>; + regulator-always-on; + regulator-boot-on; + }; + + buck4: BUCK4 { /* VDD_3V3 */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5: BUCK5 { /* VDD_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6: BUCK6 { /* NVCC_DRAM_1V1 */ + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1: LDO1 { /* NVCC_SNVS_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3: LDO3 { /* VDDA_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4: LDO4 { /* PMIC_LDO4 */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5: LDO5 { /* NVCC_SD2 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&i2c5 { /* HDMI EDID bus */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c5>; + pinctrl-1 = <&pinctrl_i2c5_gpio>; + scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_pwm>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +/* SD slot */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <&buck4>; + vqmmc-supply = <&buck5>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&uart1 { /* RS485 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "disabled"; /* Optional */ +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { /* A53 Debug */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_0 { + fsl,over-current-active-low; + status = "okay"; +}; + +&usb_dwc3_0 { /* Lower plug direct */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { /* Upper plug via HUB */ + dr_mode = "host"; + status = "okay"; +}; + +&wdog1 { + status = "okay"; +}; + +/* IOMUXC node should be at the end of DT to improve readability. */ +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>, + <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>, + <&pinctrl_panel_expansion>; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 + >; + }; + + pinctrl_ecspi2: ecspi2-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 + >; + }; + + pinctrl_ecspi3: ecspi3-grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x44 + MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x44 + MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x44 + MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x40 + >; + }; + + pinctrl_eqos: eqos-grp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + /* ENET_RST# */ + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x6 + /* ENET_INT# */ + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000090 + >; + }; + + pinctrl_fec: fec-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + /* ENET2_RST# */ + MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x6 + /* ENET2_INT# */ + MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x40000090 + >; + }; + + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_hog_feature: hog-feature-grp { + fsl,pins = < + /* GPIO5_IO03 */ + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x40000006 + /* GPIO5_IO04 */ + MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40000006 + + /* CAN_INT# */ + MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x40000090 + >; + }; + + pinctrl_hog_panel: hog-panel-grp { + fsl,pins = < + /* GRAPHICS_GPIO0_1V8 */ + MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x26 + >; + }; + + pinctrl_hog_misc: hog-misc-grp { + fsl,pins = < + /* ENET_WOL# -- shared by both PHYs */ + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x40000090 + + /* PG_V_IN_VAR# */ + MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x40000000 + /* CSI2_PD_1V8 */ + MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x0 + /* CSI2_RESET_1V8# */ + MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x0 + + /* DIS_USB_DN1 */ + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x0 + /* DIS_USB_DN2 */ + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x0 + + /* EEPROM_WP_1V8# */ + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x100 + /* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */ + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x0 + /* GRAPHICS_PRSNT_1V8# */ + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000000 + + /* CLK_CCM_CLKO1_3V3 */ + MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x10 + >; + }; + + pinctrl_hog_sbc: hog-sbc-grp { + fsl,pins = < + /* MEMCFG[0..2] straps */ + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x40000140 + MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x40000140 + MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x40000140 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x40000084 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x40000084 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x84 + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x84 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x40000084 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x40000084 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x84 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x84 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084 + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84 + MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84 + >; + }; + + pinctrl_i2c5: i2c5-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x40000084 + MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x40000084 + >; + }; + + pinctrl_i2c5_gpio: i2c5-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84 + MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84 + >; + }; + + pinctrl_panel_backlight: panel-backlight-grp { + fsl,pins = < + /* BL_ENABLE_1V8 */ + MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x104 + >; + }; + + pinctrl_panel_expansion: panel-expansion-grp { + fsl,pins = < + /* DSI_RESET_1V8# */ + MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x2 + /* DSI_IRQ_1V8# */ + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000090 + >; + }; + + pinctrl_panel_pwm: panel-pwm-grp { + fsl,pins = < + /* BL_PWM_3V3 */ + MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT 0x12 + >; + }; + + pinctrl_panel_vcc_reg: panel-vcc-grp { + fsl,pins = < + /* TFT_ENABLE_1V8 */ + MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x104 + >; + }; + + pinctrl_pcie0: pcie-grp { + fsl,pins = < + /* M2_PCIE_RST# */ + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2 + /* M2_W_DISABLE1_1V8# */ + MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x2 + /* M2_W_DISABLE2_1V8# */ + MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x2 + /* CLK_M2_32K768 */ + MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x14 + /* M2_PCIE_WAKE# */ + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x40000140 + /* M2_PCIE_CLKREQ# */ + MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 + >; + }; + + pinctrl_pdm: pdm-grp { + fsl,pins = < + /* PDM_SEL */ + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x0 + MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK 0x0 + MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00 0x0 + >; + }; + + pinctrl_pmic: pmic-grp { + fsl,pins = < + /* PMIC_nINT */ + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090 + >; + }; + + pinctrl_rtc: rtc-grp { + fsl,pins = < + /* RTC_IRQ# */ + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000090 + >; + }; + + pinctrl_sai1: sai1-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK 0xd6 + MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0xd6 + >; + }; + + pinctrl_sai2: sai2-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6 + >; + }; + + pinctrl_sai3: sai3-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x49 + MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x49 + MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS 0x49 + MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49 + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x49 + MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49 + MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49 + >; + }; + + pinctrl_uart3: uart3-grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4-grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080 + >; + }; + + pinctrl_usdhc3: usdhc3-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usb_hub: usb-hub-grp { + fsl,pins = < + /* USBHUB_RESET# */ + MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x4 + >; + }; + + pinctrl_usb1: usb1-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x6 + MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x80 + >; + }; + + pinctrl_watchdog_gpio: watchdog-gpio-grp { + fsl,pins = < + /* WDOG_B# */ + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x26 + /* WDOG_EN -- ungate WDT RESET# signal propagation */ + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x6 + /* WDOG_KICK# / WDI */ + MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x26 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index 2876d18f2a38..b4409349eb3f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -43,6 +43,17 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + reg_usb_hub: regulator-usb-hub { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_hub>; + regulator-name = "USB_HUB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &A53_0 { @@ -254,6 +265,41 @@ status = "okay"; }; +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + dr_mode = "host"; + status = "okay"; + + /* 2.x hub on port 1 */ + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + vdd-supply = <®_usb_hub>; + peer-hub = <&usb_hub_3_x>; + }; + + /* 3.x hub on port 2 */ + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + vdd-supply = <®_usb_hub>; + peer-hub = <&usb_hub_2_x>; + }; +}; + /* SD Card */ &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; @@ -384,6 +430,12 @@ >; }; + pinctrl_reg_usb_hub: regusbhubgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x19 + >; + }; + pinctrl_rtc_int: rtcintgrp { fsl,pins = < MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140 @@ -411,6 +463,13 @@ >; }; + pinctrl_usb1: usb1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10 + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index 382fbedaf6ba..92df6c1277c3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -104,20 +104,10 @@ }; }; -/* - * PDK2 carrier board uses SoM with KSZ9131 populated and connected to - * SoM EQoS ethernet RGMII interface. Remove the other SoM PHY DT node. - */ -/delete-node/ ðphy0f; - -/* - * PDK2 carrier board has KSZ9021 PHY populated and connected to SoM FEC - * ethernet RGMII interface. The SoM is not populated with second FEC PHY. - */ -/delete-node/ ðphy1f; - &fec { /* Second ethernet */ + pinctrl-0 = <&pinctrl_fec_rgmii>; phy-handle = <ðphypdk>; + phy-mode = "rgmii"; mdio { ethphypdk: ethernet-phy@7 { /* KSZ 9021 */ @@ -151,6 +141,20 @@ status = "okay"; }; +&pcie_phy { + clock-names = "ref"; + clocks = <&clk IMX8MP_SYS_PLL2_100M>; + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_UNUSED>; + status = "okay"; +}; + +&pcie { + fsl,max-link-speed = <1>; + reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; /* GPIO J */ + status = "okay"; +}; + &usb3_1 { fsl,over-current-active-low; }; @@ -159,7 +163,7 @@ /* * GPIO_A,B,C,D are connected to buttons. * GPIO_E,F,H,I are connected to LEDs. - * GPIO_M is connected to CLKOUT2. + * GPIO_M is connected to CLKOUT1. */ pinctrl-0 = <&pinctrl_hog_base &pinctrl_dhcom_g &pinctrl_dhcom_j diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts new file mode 100644 index 000000000000..b5e76b992a10 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marek Vasut <marex@denx.de> + * + * DHCOM iMX8MP variant: + * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2 + * DHCOM PCB number: 660-100 or newer + * PDK3 PCB number: 669-100 or newer + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mp-dhcom-som.dtsi" + +/ { + model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)"; + compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som", + "fsl,imx8mp"; + + chosen { + stdout-path = &uart1; + }; + + clk_pcie: clock-pcie { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_c_0_hs_ep: endpoint { + remote-endpoint = <&dwc3_0_hs_ep>; + }; + }; + + port@1 { + reg = <1>; + + usb_c_0_ss_ep: endpoint { + remote-endpoint = <&ptn5150_in_ep>; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */ + label = "TA1-GPIO-A"; + linux,code = <KEY_A>; + pinctrl-0 = <&pinctrl_dhcom_a>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-1 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */ + label = "TA2-GPIO-B"; + linux,code = <KEY_B>; + pinctrl-0 = <&pinctrl_dhcom_b>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-2 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */ + label = "TA3-GPIO-C"; + linux,code = <KEY_C>; + pinctrl-0 = <&pinctrl_dhcom_c>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-3 { + gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */ + label = "TA4-GPIO-E"; + linux,code = <KEY_E>; + pinctrl-0 = <&pinctrl_dhcom_e>; + pinctrl-names = "default"; + wakeup-source; + }; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */ + pinctrl-0 = <&pinctrl_dhcom_d>; + pinctrl-names = "default"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */ + pinctrl-0 = <&pinctrl_dhcom_f>; + pinctrl-names = "default"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */ + pinctrl-0 = <&pinctrl_dhcom_g>; + pinctrl-names = "default"; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */ + pinctrl-0 = <&pinctrl_dhcom_i>; + pinctrl-names = "default"; + }; + }; + + reg_avdd: regulator-avdd { /* AUDIO_VDD */ + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "AUDIO_VDD"; + }; +}; + +&i2c5 { + i2c-mux@70 { + compatible = "nxp,pca9540"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmuxed0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + typec@3d { + compatible = "nxp,ptn5150"; + reg = <0x3d>; + interrupt-parent = <&gpio4>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ptn5150>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ptn5150_in_ep: endpoint { + remote-endpoint = <&usb_c_0_ss_ep>; + }; + }; + + port@1 { + reg = <1>; + + ptn5150_out_ep: endpoint { + remote-endpoint = <&dwc3_0_ss_ep>; + }; + }; + }; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <20000>; /* 0.02 R */ + ti,shunt-gain = <1>; /* Drop cca. 40mV */ + }; + + eeprom_board: eeprom@54 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x54>; + }; + }; + + i2cmuxed1: i2c@1 { /* HDMI DDC I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +ðphy0g { + reg = <7>; +}; + +&fec { /* Second ethernet */ + pinctrl-0 = <&pinctrl_fec_rgmii>; + phy-handle = <ðphypdk>; + phy-mode = "rgmii-id"; + + mdio { + ethphypdk: ethernet-phy@7 { /* Micrel KSZ9131RNXI */ + compatible = "ethernet-phy-id0022.1642", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy1>; + pinctrl-names = "default"; + reg = <7>; + reset-assert-us = <1000>; + /* RESET_N signal rise time ~100ms */ + reset-deassert-us = <120000>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&flexcan1 { + status = "okay"; +}; + +&pcie_phy { + clocks = <&clk_pcie>; + clock-names = "ref"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + status = "okay"; +}; + +&pcie { + fsl,max-link-speed = <3>; + reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usb_dwc3_0 { + usb-role-switch; + + port { + #address-cells = <1>; + #size-cells = <0>; + + dwc3_0_hs_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&usb_c_0_hs_ep>; + }; + + dwc3_0_ss_ep: endpoint@1 { + reg = <1>; + remote-endpoint = <&ptn5150_out_ep>; + }; + }; +}; + +&usb3_1 { + fsl,disable-port-power-control; + fsl,permanently-attached; +}; + +&usb_dwc3_1 { + /* This port has USB5734 Hub connected to it, PWR/OC pins are unused */ + /delete-property/ pinctrl-names; + /delete-property/ pinctrl-0; +}; + +&iomuxc { + /* + * GPIO_A,B,C,E are connected to buttons. + * GPIO_D,F,G,I are connected to LEDs. + * GPIO_H is connected to USB Hub RESET_N. + * GPIO_M is connected to CLKOUT2. + */ + pinctrl-0 = <&pinctrl_hog_base + &pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k + &pinctrl_dhcom_l + &pinctrl_dhcom_int>; + + pinctrl_ptn5150: ptn5150grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40000000 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index 9cdd4234c4ca..7e804f650784 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -83,7 +83,7 @@ &eqos { /* First ethernet */ pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eqos>; + pinctrl-0 = <&pinctrl_eqos_rgmii>; phy-handle = <ðphy0g>; phy-mode = "rgmii-id"; status = "okay"; @@ -94,14 +94,14 @@ #size-cells = <0>; /* Up to one of these two PHYs may be populated. */ - ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */ + ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */ compatible = "ethernet-phy-id0007.c110", "ethernet-phy-ieee802.3-c22"; interrupt-parent = <&gpio3>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_ethphy0>; pinctrl-names = "default"; - reg = <1>; + reg = <0>; reset-assert-us = <1000>; reset-deassert-us = <1000>; reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; @@ -129,9 +129,9 @@ &fec { /* Second ethernet */ pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; + pinctrl-0 = <&pinctrl_fec_rmii>; phy-handle = <ðphy1f>; - phy-mode = "rgmii"; + phy-mode = "rmii"; fsl,magic-packet; status = "okay"; @@ -547,7 +547,7 @@ &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l - /* GPIO_M is connected to CLKOUT2 */ + /* GPIO_M is connected to CLKOUT1 */ &pinctrl_dhcom_int>; pinctrl-names = "default"; @@ -673,7 +673,7 @@ >; }; - pinctrl_eqos: dhcom-eqos-grp { /* RGMII */ + pinctrl_eqos_rgmii: dhcom-eqos-rgmii-grp { /* RGMII */ fsl,pins = < MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 @@ -692,6 +692,22 @@ >; }; + pinctrl_eqos_rmii: dhcom-eqos-rmii-grp { /* RMII */ + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER 0x1f + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + /* Clock */ + MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x4000001f + >; + }; + pinctrl_enet_vio: dhcom-enet-vio-grp { fsl,pins = < MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22 @@ -700,9 +716,9 @@ pinctrl_ethphy0: dhcom-ethphy0-grp { fsl,pins = < - /* ENET1_#RST Reset */ + /* ENET_QOS_#RST Reset */ MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22 - /* ENET1_#INT Interrupt */ + /* ENET_QOS_#INT Interrupt */ MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22 >; }; @@ -716,7 +732,7 @@ >; }; - pinctrl_fec: dhcom-fec-grp { + pinctrl_fec_rgmii: dhcom-fec-rgmii-grp { /* RGMII */ fsl,pins = < MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x1f MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 @@ -737,6 +753,22 @@ >; }; + pinctrl_fec_rmii: dhcom-fec-rmii-grp { /* RMII */ + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + /* Clock */ + MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x4000001f + >; + }; + pinctrl_flexcan1: dhcom-flexcan1-grp { fsl,pins = < MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 3fa6cca9a043..d8fb29e7e148 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -80,12 +80,14 @@ label = "S12"; linux,code = <BTN_0>; gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; + wakeup-source; }; switch-2 { label = "S13"; linux,code = <BTN_1>; gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi index 80db1ad7c230..56b0e4b865c9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi @@ -67,7 +67,14 @@ /* TODO: Audio Codec */ }; -/* TODO: Verdin PCIE_1 */ +/* Verdin PCIE_1 */ +&pcie { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; /* Verdin PWM_1 */ &pwm1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi index 361426c0da0a..bdfdd4c782f1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi @@ -10,7 +10,7 @@ compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */ - off-on-delay = <500000>; + off-on-delay-us = <500000>; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; regulator-name = "+V3.3_ETH"; @@ -91,7 +91,14 @@ /* TODO: Audio Codec */ }; -/* TODO: Verdin PCIE_1 */ +/* Verdin PCIE_1 */ +&pcie { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; /* Verdin PWM_1 */ &pwm1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi index 36289c175e6e..ef94f9a57e20 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi @@ -65,6 +65,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_bt_uart>; status = "okay"; + + bluetooth { + compatible = "mrvl,88w8997"; + max-speed = <921600>; + }; }; /* On-module Wi-Fi */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi index bd7b31cc3760..db1722f0d80e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi @@ -87,7 +87,7 @@ status = "okay"; }; -/* EEPROM on Verdin yavia board */ +/* EEPROM on Verdin Yavia board */ &eeprom_carrier_board { status = "okay"; }; @@ -122,7 +122,7 @@ status = "okay"; }; -&pcie_phy{ +&pcie_phy { status = "okay"; }; @@ -183,7 +183,6 @@ }; &usb_dwc3_1 { - disable-over-current; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index 0dd6180a8e39..e9e4fcb562f1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -87,7 +87,7 @@ compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */ - off-on-delay = <500000>; + off-on-delay-us = <500000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_eth>; regulator-always-on; @@ -128,7 +128,7 @@ enable-active-high; /* Verdin SD_1_PWR_EN (SODIMM 76) */ gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; - off-on-delay = <100000>; + off-on-delay-us = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; regulator-max-microvolt = <3300000>; @@ -748,7 +748,20 @@ }; }; -/* TODO: Verdin PCIE_1 */ +/* Verdin PCIE_1 */ +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + /* PCIE_1_RESET# (SODIMM 244) */ + reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; +}; + +&pcie_phy { + clocks = <&hsio_blk_ctrl>; + clock-names = "ref"; + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; +}; /* Verdin PWM_1 */ &pwm1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index a19224fe1a6a..f81391993354 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -409,6 +409,30 @@ status = "disabled"; }; + gpt1: timer@302d0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x302d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT1_ROOT>, <&clk IMX8MP_CLK_GPT1>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@302e0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x302e0000 0x10000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT2_ROOT>, <&clk IMX8MP_CLK_GPT2>; + clock-names = "ipg", "per"; + }; + + gpt3: timer@302f0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x302f0000 0x10000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT3_ROOT>, <&clk IMX8MP_CLK_GPT3>; + clock-names = "ipg", "per"; + }; + iomuxc: pinctrl@30330000 { compatible = "fsl,imx8mp-iomuxc"; reg = <0x30330000 0x10000>; @@ -722,6 +746,30 @@ clocks = <&osc_24m>; clock-names = "per"; }; + + gpt6: timer@306e0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x306e0000 0x10000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT6_ROOT>, <&clk IMX8MP_CLK_GPT6>; + clock-names = "ipg", "per"; + }; + + gpt5: timer@306f0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x306f0000 0x10000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT5_ROOT>, <&clk IMX8MP_CLK_GPT5>; + clock-names = "ipg", "per"; + }; + + gpt4: timer@30700000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x30700000 0x10000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT4_ROOT>, <&clk IMX8MP_CLK_GPT4>; + clock-names = "ipg", "per"; + }; }; aips3: bus@30800000 { @@ -1126,13 +1174,68 @@ #size-cells = <1>; ranges; + mipi_dsi: dsi@32e60000 { + compatible = "fsl,imx8mp-mipi-dsim"; + reg = <0x32e60000 0x400>; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_APB>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_CLK_24M>; + assigned-clock-rates = <200000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_DSI_1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif1: endpoint { + remote-endpoint = <&lcdif1_to_dsim>; + }; + }; + }; + }; + + lcdif1: display-controller@32e80000 { + compatible = "fsl,imx8mp-lcdif"; + reg = <0x32e80000 0x10000>; + clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI>, + <&clk IMX8MP_CLK_MEDIA_APB>; + assigned-clock-parents = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, + <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>; + status = "disabled"; + + port { + lcdif1_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif1>; + }; + }; + }; + lcdif2: display-controller@32e90000 { compatible = "fsl,imx8mp-lcdif"; - reg = <0x32e90000 0x238>; + reg = <0x32e90000 0x10000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, - <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, - <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; clock-names = "pix", "axi", "disp_axi"; assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, <&clk IMX8MP_VIDEO_PLL1>; @@ -1151,7 +1254,7 @@ media_blk_ctrl: blk-ctrl@32ec0000 { compatible = "fsl,imx8mp-media-blk-ctrl", - "simple-bus", "syscon"; + "syscon"; reg = <0x32ec0000 0x10000>; #address-cells = <1>; #size-cells = <1>; @@ -1202,10 +1305,10 @@ lvds_bridge: bridge@5c { compatible = "fsl,imx8mp-ldb"; - clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; - clock-names = "ldb"; reg = <0x5c 0x4>, <0x128 0x4>; reg-names = "ldb", "lvds"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; status = "disabled"; @@ -1309,6 +1412,32 @@ status = "disabled"; }; + pcie_ep: pcie-ep@33800000 { + compatible = "fsl,imx8mp-pcie-ep"; + reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>; + reg-names = "dbi", "addr_space"; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; + num-lanes = <1>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */ + interrupt-names = "dma"; + fsl,max-link-speed = <3>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + num-ib-windows = <4>; + num-ob-windows = <4>; + status = "disabled"; + }; + gpu3d: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x8000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 7605802f294d..ce7ce2ba855c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -667,7 +667,7 @@ >; }; - pinctrl_spkamp: spkamp { + pinctrl_spkamp: spkampgrp { fsl,pins = < MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3 0x81 /* MUTE */ >; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts index 73bd431cbd6a..2b3d437a642a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts @@ -12,18 +12,16 @@ compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq"; }; -&bq25895 { - ti,battery-regulation-voltage = <4192000>; /* uV */ - ti,charge-current = <1600000>; /* uA */ - ti,termination-current = <66000>; /* uA */ -}; - &accel_gyro { mount-matrix = "1", "0", "0", "0", "-1", "0", "0", "0", "1"; }; +&bq25895 { + ti,charge-current = <1600000>; /* uA */ +}; + &proximity { - proximity-near-level = <120>; + proximity-near-level = <50>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts index 4533a84fb0b9..077c5cd2586f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts @@ -7,7 +7,7 @@ &a53_opp_table { opp-1000000000 { - opp-microvolt = <1000000>; + opp-microvolt = <950000>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi index e4f8b47cce4f..7fd0176e4bd3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi @@ -22,9 +22,7 @@ }; &bq25895 { - ti,battery-regulation-voltage = <4200000>; /* uV */ ti,charge-current = <1500000>; /* uA */ - ti,termination-current = <144000>; /* uA */ }; &camera_front { @@ -40,6 +38,12 @@ }; }; +&magnetometer { + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "-1"; +}; + &proximity { - proximity-near-level = <25>; + proximity-near-level = <10>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts index 1056b7981bdb..97577c0a7715 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts @@ -23,5 +23,5 @@ }; &proximity { - proximity-near-level = <10>; + proximity-near-level = <5>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 6895bcc12165..38732579d13e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -20,6 +20,8 @@ backlight_dsi: backlight-dsi { compatible = "led-backlight"; leds = <&led_backlight>; + brightness-levels = <255>; + default-brightness-level = <190>; }; pmic_osc: clock-pmic { @@ -84,13 +86,21 @@ compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audiopwr>; - regulator-name = "AUDIO_PWR_EN"; + regulator-name = "AUD_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; enable-active-high; }; + reg_mic_2v4: regulator-mic-2v4 { + compatible = "regulator-fixed"; + regulator-name = "MIC_2V4"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2400000>; + vin-supply = <®_aud_1v8>; + }; + /* * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC * since we can't have it twice in the 2 different regulator nodes. @@ -319,6 +329,10 @@ opp-hz = /bits/ 64 <100000000>; }; + opp-166000000 { + opp-hz = /bits/ 64 <166935483>; + }; + opp-800000000 { opp-hz = /bits/ 64 <800000000>; }; @@ -371,6 +385,16 @@ }; &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* CLKO2 for cameras on both CSI1 and CSI2 */ + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f + >; + }; + pinctrl_audiopwr: audiopwrgrp { fsl,pins = < /* AUDIO_POWER_EN_3V3 */ @@ -662,7 +686,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd @@ -679,7 +703,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf @@ -709,7 +733,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d @@ -722,7 +746,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f @@ -758,7 +782,7 @@ }; &i2c1 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; @@ -806,6 +830,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>; clocks = <&pmic_osc>; + #clock-cells = <0>; clock-names = "osc"; clock-output-names = "pmic_clk"; interrupt-parent = <&gpio1>; @@ -819,9 +844,9 @@ regulator-max-microvolt = <1300000>; regulator-boot-on; regulator-ramp-delay = <1250>; - rohm,dvs-run-voltage = <900000>; - rohm,dvs-idle-voltage = <850000>; - rohm,dvs-suspend-voltage = <800000>; + rohm,dvs-run-voltage = <880000>; + rohm,dvs-idle-voltage = <820000>; + rohm,dvs-suspend-voltage = <810000>; regulator-always-on; }; @@ -831,8 +856,8 @@ regulator-max-microvolt = <1300000>; regulator-boot-on; regulator-ramp-delay = <1250>; - rohm,dvs-run-voltage = <1000000>; - rohm,dvs-idle-voltage = <900000>; + rohm,dvs-run-voltage = <950000>; + rohm,dvs-idle-voltage = <850000>; regulator-always-on; }; @@ -841,14 +866,14 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; - rohm,dvs-run-voltage = <900000>; + rohm,dvs-run-voltage = <850000>; }; buck4_reg: BUCK4 { regulator-name = "buck4"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; - rohm,dvs-run-voltage = <1000000>; + rohm,dvs-run-voltage = <930000>; }; buck5_reg: BUCK5 { @@ -956,12 +981,12 @@ }; &i2c2 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - magnetometer@1e { + magnetometer: magnetometer@1e { compatible = "st,lsm9ds1-magn"; reg = <0x1e>; pinctrl-names = "default"; @@ -1005,7 +1030,7 @@ }; &i2c3 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; @@ -1023,7 +1048,7 @@ DBVDD-supply = <®_aud_1v8>; AVDD-supply = <®_aud_1v8>; CPVDD-supply = <®_aud_1v8>; - MICVDD-supply = <®_aud_1v8>; + MICVDD-supply = <®_mic_2v4>; PLLVDD-supply = <®_aud_1v8>; SPKVDD1-supply = <®_vsys_3v4>; SPKVDD2-supply = <®_vsys_3v4>; @@ -1095,7 +1120,7 @@ }; &i2c4 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; @@ -1127,7 +1152,9 @@ interrupt-parent = <&gpio3>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; phys = <&usb3_phy0>; - ti,precharge-current = <130000>; /* uA */ + ti,battery-regulation-voltage = <4208000>; /* uV */ + ti,termination-current = <128000>; /* uA */ + ti,precharge-current = <128000>; /* uA */ ti,minimum-sys-voltage = <3700000>; /* uV */ ti,boost-voltage = <5000000>; /* uV */ ti,boost-max-current = <1500000>; /* uA */ @@ -1143,6 +1170,7 @@ }; &mipi_csi1 { + assigned-clock-rates = <266000000>, <200000000>, <66000000>; status = "okay"; ports { @@ -1299,7 +1327,6 @@ #address-cells = <1>; #size-cells = <0>; dr_mode = "otg"; - snps,dis_u3_susphy_quirk; usb-role-switch; status = "okay"; @@ -1366,7 +1393,7 @@ mmc-pwrseq = <&usdhc2_pwrseq>; post-power-on-delay-ms = <1000>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - max-frequency = <50000000>; + max-frequency = <100000000>; disable-wp; cap-sdio-irq; keep-power-in-suspend; @@ -1380,3 +1407,13 @@ fsl,ext-reset-output; status = "okay"; }; + +&a53_opp_table { + opp-1000000000 { + opp-microvolt = <850000>; + }; + + opp-1500000000 { + opp-microvolt = <950000>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index 344cfdaeb1d5..c5244b608524 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -169,8 +169,6 @@ hnp-disable; srp-disable; adp-disable; - /* OC not supported due to non matching active polarity */ - disable-over-current; dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 98fbba4c99a9..cd925c0ac911 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -940,6 +940,8 @@ clocks = <&clk IMX8MQ_CLK_UART1_ROOT>, <&clk IMX8MQ_CLK_UART1_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -951,6 +953,8 @@ clocks = <&clk IMX8MQ_CLK_UART3_ROOT>, <&clk IMX8MQ_CLK_UART3_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -962,6 +966,8 @@ clocks = <&clk IMX8MQ_CLK_UART2_ROOT>, <&clk IMX8MQ_CLK_UART2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1157,6 +1163,8 @@ clocks = <&clk IMX8MQ_CLK_UART4_ROOT>, <&clk IMX8MQ_CLK_UART4_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1605,6 +1613,38 @@ status = "disabled"; }; + pcie1_ep: pcie-ep@33c00000 { + compatible = "fsl,imx8mq-pcie-ep"; + reg = <0x33c00000 0x000400000>, + <0x20000000 0x08000000>; + reg-names = "dbi", "addr_space"; + num-lanes = <1>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma"; + fsl,max-link-speed = <2>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIEPHY2>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <250000000>, <100000000>, + <10000000>; + num-ib-windows = <4>; + num-ob-windows = <4>; + status = "disabled"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts new file mode 100644 index 000000000000..5ab0921eb599 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis.dtsi" +#include "imx8-apalis-eval.dtsi" + +/ { + model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board"; + compatible = "toradex,apalis-imx8-eval", + "toradex,apalis-imx8", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts new file mode 100644 index 000000000000..68ce58dc7102 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis.dtsi" +#include "imx8-apalis-ixora-v1.1.dtsi" + +/ { + model = "Toradex Apalis iMX8QM/QP on Apalis Ixora V1.1 Carrier Board"; + compatible = "toradex,apalis-imx8-ixora-v1.1", + "toradex,apalis-imx8", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts new file mode 100644 index 000000000000..c8ff75831556 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis-v1.1.dtsi" +#include "imx8-apalis-eval.dtsi" + +/ { + model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board"; + compatible = "toradex,apalis-imx8-v1.1-eval", + "toradex,apalis-imx8-v1.1", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts new file mode 100644 index 000000000000..ad7f644968fa --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis-v1.1.dtsi" +#include "imx8-apalis-ixora-v1.1.dtsi" + +/ { + model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.1 Carrier Board"; + compatible = "toradex,apalis-imx8-v1.1-ixora-v1.1", + "toradex,apalis-imx8-v1.1", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts new file mode 100644 index 000000000000..3b2e8c93b846 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis-v1.1.dtsi" +#include "imx8-apalis-ixora-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.2 Carrier Board"; + compatible = "toradex,apalis-imx8-v1.1-ixora-v1.2", + "toradex,apalis-imx8-v1.1", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi new file mode 100644 index 000000000000..81ba8b2831ac --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include <dt-bindings/pwm/pwm.h> +#include "imx8qm.dtsi" +#include "imx8-apalis-v1.1.dtsi" + +/ { + model = "Toradex Apalis iMX8QM V1.1"; + compatible = "toradex,apalis-imx8-v1.1", + "fsl,imx8qm"; +}; + +/* TODO: Cooling Maps */ diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi new file mode 100644 index 000000000000..1c6af9f549a8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include "imx8qm-apalis-v1.1.dtsi" + +/ { + model = "Toradex Apalis iMX8QM"; + compatible = "toradex,apalis-imx8", + "fsl,imx8qm"; +}; + +ðphy0 { + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; +}; + +/* + * Apalis iMX8QM V1.0 has PHY KSZ9031. the Micrel PHY driver + * doesn't support setting internal PHY delay for TXC line for + * this PHY model. Use delay on MAC side instead. + */ +&fec1 { + fsl,rgmii_txc_dly; + phy-mode = "rgmii-rxid"; +}; + +/* TODO: Apalis HDMI1 */ + +/* Apalis I2C2 (DDC) */ +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; +}; + +&lsio_gpio0 { + gpio-line-names = "MXM3_279", + "MXM3_277", + "MXM3_135", + "MXM3_203", + "MXM3_201", + "MXM3_275", + "MXM3_110", + "MXM3_120", + "MXM3_1/GPIO1", + "MXM3_3/GPIO2", + "MXM3_124", + "MXM3_122", + "MXM3_5/GPIO3", + "MXM3_7/GPIO4", + "", + "", + "MXM3_4", + "MXM3_211", + "MXM3_209", + "MXM3_2", + "MXM3_136", + "MXM3_134", + "MXM3_6", + "MXM3_8", + "MXM3_112", + "MXM3_118", + "MXM3_114", + "MXM3_116"; +}; + +&lsio_gpio1 { + gpio-line-names = "", + "", + "", + "", + "MXM3_286", + "", + "MXM3_87", + "MXM3_99", + "MXM3_138", + "MXM3_140", + "MXM3_239", + "", + "MXM3_281", + "MXM3_283", + "MXM3_126", + "MXM3_132", + "", + "", + "", + "", + "MXM3_173", + "MXM3_175", + "MXM3_123"; +}; + +&lsio_gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "MXM3_198", + "MXM3_35", + "MXM3_164", + "", + "", + "", + "", + "MXM3_217", + "MXM3_215", + "", + "", + "MXM3_193", + "MXM3_194", + "MXM3_37", + "", + "MXM3_271", + "MXM3_273", + "MXM3_195", + "MXM3_197", + "MXM3_177", + "MXM3_179", + "MXM3_181", + "MXM3_183", + "MXM3_185", + "MXM3_187"; +}; + +&lsio_gpio3 { + gpio-line-names = "MXM3_191", + "", + "MXM3_221", + "MXM3_225", + "MXM3_223", + "MXM3_227", + "MXM3_200", + "MXM3_235", + "MXM3_231", + "MXM3_229", + "MXM3_233", + "MXM3_204", + "MXM3_196", + "", + "MXM3_202", + "", + "", + "", + "MXM3_305", + "MXM3_307", + "MXM3_309", + "MXM3_311", + "MXM3_315", + "MXM3_317", + "MXM3_319", + "MXM3_321", + "MXM3_15/GPIO7", + "MXM3_63", + "MXM3_17/GPIO8", + "MXM3_12", + "MXM3_14", + "MXM3_16"; +}; + +&lsio_gpio4 { + gpio-line-names = "MXM3_18", + "MXM3_11/GPIO5", + "MXM3_13/GPIO6", + "MXM3_274", + "MXM3_84", + "MXM3_262", + "MXM3_96", + "", + "", + "", + "", + "", + "MXM3_190", + "", + "", + "", + "MXM3_269", + "MXM3_251", + "MXM3_253", + "MXM3_295", + "MXM3_299", + "MXM3_301", + "MXM3_297", + "MXM3_293", + "MXM3_291", + "MXM3_289", + "MXM3_287"; + + /* Enable pcie root / sata ref clock unconditionally */ + pcie-sata-hog { + gpios = <27 GPIO_ACTIVE_HIGH>; + }; + +}; + +&lsio_gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MXM3_150", + "MXM3_160", + "MXM3_162", + "MXM3_144", + "MXM3_146", + "MXM3_148", + "MXM3_152", + "MXM3_156", + "MXM3_158", + "MXM3_159", + "MXM3_184", + "MXM3_180", + "MXM3_186", + "MXM3_188", + "MXM3_176", + "MXM3_178"; +}; + +&lsio_gpio6 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MXM3_261", + "MXM3_263", + "MXM3_259", + "MXM3_257", + "MXM3_255", + "MXM3_128", + "MXM3_130", + "MXM3_265", + "MXM3_249", + "MXM3_247", + "MXM3_245", + "MXM3_243"; +}; + +&pinctrl_fec1 { + fsl,pins = + /* Use pads in 1.8V mode */ + <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>, + <IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020>, + <IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020>, + <IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020>, + <IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020>, + <IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020>, + <IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020>, + <IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M 0x06000020>, + /* On-module ETH_RESET# */ + <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020>, + /* On-module ETH_INT# */ + <IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05 0x04000060>; +}; + +&pinctrl_fec1_sleep { + fsl,pins = + <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>, + <IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14 0x04000040>, + <IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13 0x04000040>, + <IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31 0x04000040>, + <IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03 0x04000040>, + <IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04 0x04000040>, + <IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09 0x04000040>, + <IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15 0x04000040>, + <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x04000040>, + <IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05 0x04000040>; +}; + +&iomuxc { + /* Apalis I2C2 (DDC) */ + pinctrl_lpi2c0: lpi2c0grp { + fsl,pins = + <IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x04000022>, + <IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA 0x04000022>; + }; +}; + +/* On-module PCIe_CTRL0_CLKREQ */ +&pinctrl_pcie_sata_refclk { + fsl,pins = + <IMX8QM_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27 0x00000021>; +}; + +/* TODO: On-module Wi-Fi */ + +/* Apalis MMC1 */ +&usdhc2 { + /* + * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates + * issues with certain SD cards, disable 1.8V signaling for now. + */ + no-1-8-v; +}; + +/* Apalis SD1 */ +&usdhc3 { + /* + * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates + * issues with certain SD cards, disable 1.8V signaling for now. + */ + no-1-8-v; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index bbe5f5ecfb92..e9b198c13b2f 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -16,6 +16,50 @@ "uart4_lpcg_ipg_clk"; power-domains = <&pd IMX_SC_R_UART_4>; }; + + can1_lpcg: clock-controller@5ace0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ace0000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>, <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "can1_lpcg_pe_clk", + "can1_lpcg_ipg_clk", + "can1_lpcg_chi_clk"; + power-domains = <&pd IMX_SC_R_CAN_1>; + }; + + can2_lpcg: clock-controller@5acf0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5acf0000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>, <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "can2_lpcg_pe_clk", + "can2_lpcg_ipg_clk", + "can2_lpcg_chi_clk"; + power-domains = <&pd IMX_SC_R_CAN_2>; + }; +}; + +&flexcan1 { + fsl,clk-source = /bits/ 8 <1>; +}; + +&flexcan2 { + clocks = <&can1_lpcg 1>, + <&can1_lpcg 0>; + assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>; + fsl,clk-source = /bits/ 8 <1>; +}; + +&flexcan3 { + clocks = <&can2_lpcg 1>, + <&can2_lpcg 0>; + assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>; + fsl,clk-source = /bits/ 8 <1>; }; &lpuart0 { diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 41ce8336f29e..9fff867709f0 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -23,6 +23,9 @@ serial1 = &lpuart1; serial2 = &lpuart2; serial3 = &lpuart3; + vpu_core0 = &vpu_core0; + vpu_core1 = &vpu_core1; + vpu_core2 = &vpu_core2; }; cpus { @@ -212,6 +215,7 @@ }; /* sorted in register address */ + #include "imx8-ss-vpu.dtsi" #include "imx8-ss-img.dtsi" #include "imx8-ss-dma.dtsi" #include "imx8-ss-conn.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts new file mode 100644 index 000000000000..966ecfb2a17e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +/dts-v1/; + +#include "imx8qxp-colibri.dtsi" +#include "imx8x-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP on Aster Board"; + compatible = "toradex,colibri-imx8x-aster", + "toradex,colibri-imx8x", + "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts index 6b21a295c126..fe4597a6f7e0 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2019 Toradex */ @@ -6,10 +6,10 @@ /dts-v1/; #include "imx8qxp-colibri.dtsi" -#include "imx8qxp-colibri-eval-v3.dtsi" +#include "imx8x-colibri-eval-v3.dtsi" / { - model = "Toradex Colibri iMX8QXP/DX on Colibri Evaluation Board V3"; + model = "Toradex Colibri iMX8QXP on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx8x-eval-v3", "toradex,colibri-imx8x", "fsl,imx8qxp"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi deleted file mode 100644 index 7c334b93db3b..000000000000 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2019 Toradex - */ - -#include <dt-bindings/input/linux-event-codes.h> - -/ { - aliases { - rtc0 = &rtc_i2c; - rtc1 = &rtc; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiokeys>; - - key-wakeup { - label = "Wake-Up"; - gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; -}; - -&i2c1 { - status = "okay"; - - /* M41T0M6 real time clock on carrier board */ - rtc_i2c: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -/* Colibri UART_B */ -&lpuart0 { - status = "okay"; -}; - -/* Colibri UART_C */ -&lpuart2 { - status = "okay"; -}; - -/* Colibri UART_A */ -&lpuart3 { - status = "okay"; -}; - -/* Colibri FastEthernet */ -&fec1 { - status = "okay"; -}; - -/* Colibri SD/MMC Card */ -&usdhc2 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts new file mode 100644 index 000000000000..cca33213fa9b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +/dts-v1/; + +#include "imx8qxp-colibri.dtsi" +#include "imx8x-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP on Colibri Iris V2 Board"; + compatible = "toradex,colibri-imx8x-iris-v2", + "toradex,colibri-imx8x", + "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts new file mode 100644 index 000000000000..fed75b5d4a1c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +/dts-v1/; + +#include "imx8qxp-colibri.dtsi" +#include "imx8x-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP on Colibri Iris Board"; + compatible = "toradex,colibri-imx8x-iris", + "toradex,colibri-imx8x", + "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi index 89d70e030433..0f1aa31dd3e5 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi @@ -1,598 +1,12 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2019 Toradex */ #include "imx8qxp.dtsi" +#include "imx8x-colibri.dtsi" / { - model = "Toradex Colibri iMX8QXP/DX Module"; + model = "Toradex Colibri iMX8QXP Module"; compatible = "toradex,colibri-imx8x", "fsl,imx8qxp"; - - chosen { - stdout-path = &lpuart3; - }; - - reg_module_3v3: regulator-module-3v3 { - compatible = "regulator-fixed"; - regulator-name = "+V3.3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -/* On-module I2C */ -&i2c0 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>; - status = "okay"; - - /* Touch controller */ - touchscreen@2c { - compatible = "adi,ad7879-1"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ad7879_int>; - reg = <0x2c>; - interrupt-parent = <&lsio_gpio3>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - touchscreen-max-pressure = <4096>; - adi,resistance-plate-x = <120>; - adi,first-conversion-delay = /bits/ 8 <3>; - adi,acquisition-time = /bits/ 8 <1>; - adi,median-filter-size = /bits/ 8 <2>; - adi,averaging = /bits/ 8 <1>; - adi,conversion-interval = /bits/ 8 <255>; - }; -}; - -/* Colibri I2C */ -&i2c1 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; -}; - -/* Colibri UART_B */ -&lpuart0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart0>; -}; - -/* Colibri UART_C */ -&lpuart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart2>; -}; - -/* Colibri UART_A */ -&lpuart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; -}; - -/* Colibri FastEthernet */ -&fec1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_fec1>; - pinctrl-1 = <&pinctrl_fec1_sleep>; - phy-mode = "rmii"; - phy-handle = <ðphy0>; - fsl,magic-packet; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c22"; - max-speed = <100>; - reg = <2>; - }; - }; -}; - -/* On-module eMMC */ -&usdhc1 { - bus-width = <8>; - non-removable; - no-sd; - no-sdio; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - status = "okay"; -}; - -/* Colibri SD/MMC Card */ -&usdhc2 { - bus-width = <4>; - cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_module_3v3>; - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; - disable-wp; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>; - - /* On-module touch pen-down interrupt */ - pinctrl_ad7879_int: ad7879intgrp { - fsl,pins = < - IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 0x21 - >; - }; - - /* Colibri Analogue Inputs */ - pinctrl_adc0: adc0grp { - fsl,pins = < - IMX8QXP_ADC_IN0_ADMA_ADC_IN0 0x60 /* SODIMM 8 */ - IMX8QXP_ADC_IN1_ADMA_ADC_IN1 0x60 /* SODIMM 6 */ - IMX8QXP_ADC_IN4_ADMA_ADC_IN4 0x60 /* SODIMM 4 */ - IMX8QXP_ADC_IN5_ADMA_ADC_IN5 0x60 /* SODIMM 2 */ - >; - }; - - pinctrl_can_int: canintgrp { - fsl,pins = < - IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 73 */ - >; - }; - - pinctrl_csi_ctl: csictlgrp { - fsl,pins = < - IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x20 /* SODIMM 77 */ - IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x20 /* SODIMM 89 */ - >; - }; - - pinctrl_ext_io0: extio0grp { - fsl,pins = < - IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08 0x06000040 /* SODIMM 135 */ - >; - }; - - /* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */ - pinctrl_fec1: fec1grp { - fsl,pins = < - IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 - IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 - IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61 - IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT 0x06000061 - IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61 - IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61 - IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61 - IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61 - IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61 - IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER 0x61 - >; - }; - - pinctrl_fec1_sleep: fec1slpgrp { - fsl,pins = < - IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11 0x06000041 - IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10 0x06000041 - IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x41 - IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 0x41 - IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31 0x41 - IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x41 - IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04 0x41 - IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05 0x41 - IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06 0x41 - IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07 0x41 - >; - }; - - /* Colibri optional CAN on UART_B RTS/CTS */ - pinctrl_flexcan1: flexcan0grp { - fsl,pins = < - IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21 /* SODIMM 32 */ - IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21 /* SODIMM 34 */ - >; - }; - - /* Colibri optional CAN on PS2 */ - pinctrl_flexcan2: flexcan1grp { - fsl,pins = < - IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21 /* SODIMM 55 */ - IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21 /* SODIMM 63 */ - >; - }; - - /* Colibri optional CAN on UART_A TXD/RXD */ - pinctrl_flexcan3: flexcan2grp { - fsl,pins = < - IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x21 /* SODIMM 35 */ - IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x21 /* SODIMM 33 */ - >; - }; - - /* Colibri LCD Back-Light GPIO */ - pinctrl_gpio_bl_on: gpioblongrp { - fsl,pins = < - IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12 0x60 /* SODIMM 71 */ - >; - }; - - pinctrl_gpiokeys: gpiokeysgrp { - fsl,pins = < - IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041 /* SODIMM 45 */ - >; - }; - - pinctrl_hog0: hog0grp { - fsl,pins = < - IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 0x06000020 /* SODIMM 65 */ - IMX8QXP_CSI_D07_CI_PI_D09 0x61 /* SODIMM 65 */ - IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11 0x20 /* SODIMM 69 */ - IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20 /* SODIMM 79 */ - IMX8QXP_CSI_D02_CI_PI_D04 0x61 /* SODIMM 79 */ - IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020 /* SODIMM 85 */ - IMX8QXP_CSI_D06_CI_PI_D08 0x61 /* SODIMM 85 */ - IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x20 /* SODIMM 95 */ - IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20 /* SODIMM 97 */ - IMX8QXP_CSI_D03_CI_PI_D05 0x61 /* SODIMM 97 */ - IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x20 /* SODIMM 99 */ - IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20 /* SODIMM 101 */ - IMX8QXP_CSI_D00_CI_PI_D02 0x61 /* SODIMM 101 */ - IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25 0x20 /* SODIMM 103 */ - IMX8QXP_CSI_D01_CI_PI_D03 0x61 /* SODIMM 103 */ - IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x20 /* SODIMM 105 */ - IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x20 /* SODIMM 107 */ - IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05 0x20 /* SODIMM 127 */ - IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06 0x20 /* SODIMM 131 */ - IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04 0x20 /* SODIMM 133 */ - IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00 0x20 /* SODIMM 96 */ - IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x20 /* SODIMM 98 */ - IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20 /* SODIMM 100 */ - IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22 0x20 /* SODIMM 102 */ - IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23 0x20 /* SODIMM 104 */ - IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x20 /* SODIMM 106 */ - >; - }; - - pinctrl_hog1: hog1grp { - fsl,pins = < - IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20 /* SODIMM 75 */ - IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20 /* SODIMM 93 */ - >; - }; - - /* - * This pin is used in the SCFW as a UART. Using it from - * Linux would require rewritting the SCFW board file. - */ - pinctrl_hog_scfw: hogscfwgrp { - fsl,pins = < - IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03 0x20 /* SODIMM 144 */ - >; - }; - - /* On Module I2C */ - pinctrl_i2c0: i2c0grp { - fsl,pins = < - IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x06000021 - IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA 0x06000021 - >; - }; - - /* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */ - pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp { - fsl,pins = < - IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 /* SODIMM 140 */ - IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 /* SODIMM 142 */ - >; - }; - - /* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */ - pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp { - fsl,pins = < - IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 /* SODIMM 186 */ - IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 /* SODIMM 188 */ - >; - }; - - /* Colibri I2C */ - pinctrl_i2c1: i2c1grp { - fsl,pins = < - IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021 /* SODIMM 196 */ - IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021 /* SODIMM 194 */ - >; - }; - - /* Colibri Parallel RGB LCD Interface */ - pinctrl_lcdif: lcdifgrp { - fsl,pins = < - IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK 0x60 /* SODIMM 56 */ - IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC 0x60 /* SODIMM 68 */ - IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC 0x60 /* SODIMM 82 */ - IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN 0x60 /* SODIMM 44 */ - IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x60 /* SODIMM 44 */ - IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00 0x60 /* SODIMM 76 */ - IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x60 /* SODIMM 76 */ - IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01 0x60 /* SODIMM 70 */ - IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02 0x60 /* SODIMM 60 */ - IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03 0x60 /* SODIMM 58 */ - IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04 0x60 /* SODIMM 78 */ - IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05 0x60 /* SODIMM 72 */ - IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06 0x60 /* SODIMM 80 */ - IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07 0x60 /* SODIMM 46 */ - IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08 0x60 /* SODIMM 62 */ - IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09 0x60 /* SODIMM 48 */ - IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10 0x60 /* SODIMM 74 */ - IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11 0x60 /* SODIMM 50 */ - IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 0x60 /* SODIMM 52 */ - IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13 0x60 /* SODIMM 54 */ - IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14 0x60 /* SODIMM 66 */ - IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15 0x60 /* SODIMM 64 */ - IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16 0x60 /* SODIMM 57 */ - IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x60 /* SODIMM 57 */ - IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17 0x60 /* SODIMM 61 */ - >; - }; - - /* Colibri SPI */ - pinctrl_lpspi2: lpspi2grp { - fsl,pins = < - IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x21 /* SODIMM 86 */ - IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO 0x06000040 /* SODIMM 92 */ - IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI 0x06000040 /* SODIMM 90 */ - IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK 0x06000040 /* SODIMM 88 */ - >; - }; - - /* Colibri UART_B */ - pinctrl_lpuart0: lpuart0grp { - fsl,pins = < - IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 /* SODIMM 36 */ - IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 /* SODIMM 38 */ - IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 /* SODIMM 34 */ - IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 /* SODIMM 32 */ - >; - }; - - /* Colibri UART_C */ - pinctrl_lpuart2: lpuart2grp { - fsl,pins = < - IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 /* SODIMM 19 */ - IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 /* SODIMM 21 */ - >; - }; - - /* Colibri UART_A */ - pinctrl_lpuart3: lpuart3grp { - fsl,pins = < - IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 /* SODIMM 33 */ - IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 /* SODIMM 35 */ - >; - }; - - /* Colibri UART_A Control */ - pinctrl_lpuart3_ctrl: lpuart3ctrlgrp { - fsl,pins = < - IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x20 /* SODIMM 23 */ - IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29 0x20 /* SODIMM 25 */ - IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30 0x20 /* SODIMM 27 */ - IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03 0x20 /* SODIMM 29 */ - IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x20 /* SODIMM 31 */ - IMX8QXP_CSI_EN_LSIO_GPIO3_IO02 0x20 /* SODIMM 37 */ - >; - }; - - /* On module wifi module */ - pinctrl_pcieb: pciebgrp { - fsl,pins = < - IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x04000061 /* SODIMM 178 */ - IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000061 /* SODIMM 94 */ - IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x60 /* SODIMM 81 */ - >; - }; - - /* Colibri PWM_A */ - pinctrl_pwm_a: pwmagrp { - /* both pins are connected together, reserve the unused CSI_D05 */ - fsl,pins = < - IMX8QXP_CSI_D05_CI_PI_D07 0x61 /* SODIMM 59 */ - IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT 0x60 /* SODIMM 59 */ - >; - }; - - /* Colibri PWM_B */ - pinctrl_pwm_b: pwmbgrp { - fsl,pins = < - IMX8QXP_UART1_TX_LSIO_PWM0_OUT 0x60 /* SODIMM 28 */ - >; - }; - - /* Colibri PWM_C */ - pinctrl_pwm_c: pwmcgrp { - fsl,pins = < - IMX8QXP_UART1_RX_LSIO_PWM1_OUT 0x60 /* SODIMM 30 */ - >; - }; - - /* Colibri PWM_D */ - pinctrl_pwm_d: pwmdgrp { - /* both pins are connected together, reserve the unused CSI_D04 */ - fsl,pins = < - IMX8QXP_CSI_D04_CI_PI_D06 0x61 /* SODIMM 67 */ - IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT 0x60 /* SODIMM 67 */ - >; - }; - - /* On-module I2S */ - pinctrl_sai0: sai0grp { - fsl,pins = < - IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD 0x06000040 - IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD 0x06000040 - IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC 0x06000040 - IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040 - >; - }; - - /* Colibri Audio Analogue Microphone GND */ - pinctrl_sgtl5000: sgtl5000grp { - fsl,pins = < - /* MIC GND EN */ - IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06 0x41 - >; - }; - - /* On-module SGTL5000 clock */ - pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp { - fsl,pins = < - IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0 0x21 - >; - }; - - /* On-module USB interrupt */ - pinctrl_usb3503a: usb3503agrp { - fsl,pins = < - IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x61 - >; - }; - - /* Colibri USB Client Cable Detect */ - pinctrl_usbc_det: usbcdetgrp { - fsl,pins = < - IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000040 /* SODIMM 137 */ - >; - }; - - /* USB Host Power Enable */ - pinctrl_usbh1_reg: usbh1reggrp { - fsl,pins = < - IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000040 /* SODIMM 129 */ - >; - }; - - /* On-module eMMC */ - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 - IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 - IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 - IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 - IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 - IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 - IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 - IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 - IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 - IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 - IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 - IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { - fsl,pins = < - IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 - IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 - IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 - IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 - IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 - IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 - IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 - IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 - IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 - IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 - IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 - IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { - fsl,pins = < - IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 - IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 - IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 - IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 - IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 - IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 - IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 - IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 - IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 - IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 - IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 - IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 - >; - }; - - /* Colibri SD/MMC Card Detect */ - pinctrl_usdhc2_gpio: usdhc2gpiogrp { - fsl,pins = < - IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x06000021 /* SODIMM 43 */ - >; - }; - - pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp { - fsl,pins = < - IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x60 /* SODIMM 43 */ - >; - }; - - /* Colibri SD/MMC Card */ - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ - IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ - IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ - IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ - IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ - IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ - IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ - IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ - IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ - IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ - IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ - IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ - IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ - IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ - IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ - IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ - IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ - IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ - IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_usdhc2_sleep: usdhc2slpgrp { - fsl,pins = < - IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 47 */ - IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 190 */ - IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 192 */ - IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 49 */ - IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 51 */ - IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 53 */ - IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_wifi: wifigrp { - fsl,pins = < - IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x20 - >; - }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index afa883389456..7924b0969ad8 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx8qxp.dtsi" +#include <dt-bindings/usb/pd.h> / { model = "Freescale i.MX8QXP MEK"; @@ -28,6 +29,21 @@ gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + gpio-sbu-mux { + compatible = "gpio-sbu-mux"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec_mux>; + select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>; + orientation-switch; + + port { + usb3_data_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + }; }; &dsp { @@ -127,6 +143,42 @@ }; }; }; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + reg = <0x50>; + interrupt-parent = <&lsio_gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + port { + typec_dr_sw: endpoint { + remote-endpoint = <&usb3_drd_sw>; + }; + }; + + usb_con1: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "dual"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + typec_con_ss: endpoint { + remote-endpoint = <&usb3_data_ss>; + }; + }; + }; + }; + }; + }; &lpuart0 { @@ -148,7 +200,7 @@ }; &thermal_zones { - pmic-thermal0 { + pmic-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; @@ -204,6 +256,27 @@ status = "okay"; }; +&usb3_phy { + status = "okay"; +}; + +&usbotg3 { + status = "okay"; +}; + +&usbotg3_cdns3 { + dr_mode = "otg"; + usb-role-switch; + status = "okay"; + + port { + usb3_drd_sw: endpoint { + remote-endpoint = <&typec_dr_sw>; + }; + }; +}; + + &vpu { compatible = "nxp,imx8qxp-vpu"; status = "okay"; @@ -267,6 +340,18 @@ >; }; + pinctrl_typec: typecgrp { + fsl,pins = < + IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021 + >; + }; + + pinctrl_typec_mux: typecmuxgrp { + fsl,pins = < + IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x60 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi new file mode 100644 index 000000000000..aab655931cde --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +&colibri_gpio_keys { + status = "okay"; +}; + +/* Colibri Ethernet */ +&fec1 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog0>; +}; + +/* Colibri SPI */ +&lpspi2 { + cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>, + <&lsio_gpio5 2 GPIO_ACTIVE_LOW>; +}; + +/* Colibri UART_B */ +&lpuart0 { + status = "okay"; +}; + +/* Colibri UART_C */ +&lpuart2 { + status = "okay"; +}; + +/* Colibri UART_A */ +&lpuart3 { + status= "okay"; +}; + +/* Colibri SDCard */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi new file mode 100644 index 000000000000..7264d784ae72 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2019 Toradex + */ + +#include <dt-bindings/input/linux-event-codes.h> + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + /* fixed crystal dedicated to mcp25xx */ + clk16m: clock-16mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; +}; + +&colibri_gpio_keys { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* Colibri SPI */ +&lpspi2 { + status = "okay"; + + mcp2515: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + interrupt-parent = <&lsio_gpio3>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&pinctrl_can_int>; + pinctrl-names = "default"; + clocks = <&clk16m>; + spi-max-frequency = <10000000>; + }; +}; + +/* Colibri UART_B */ +&lpuart0 { + status = "okay"; +}; + +/* Colibri UART_C */ +&lpuart2 { + status = "okay"; +}; + +/* Colibri PWM_B */ +&lsio_pwm0 { + status = "okay"; +}; + +/* Colibri PWM_C */ +&lsio_pwm1 { + status = "okay"; +}; + +/* Colibri PWM_D */ +&lsio_pwm2 { + status = "okay"; +}; + +/* Colibri UART_A */ +&lpuart3 { + status = "okay"; +}; + +/* Colibri FastEthernet */ +&fec1 { + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi new file mode 100644 index 000000000000..98202a437040 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +#include "imx8x-colibri-iris.dtsi" + +/ { + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + enable-active-high; + gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3_vmmc"; + startup-delay-us = <100>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_converter &pinctrl_gpio_iris>; + + pinctrl_enable_3v3_vmmc: enable_3v3_vmmc { + fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20>; /* SODIMM 100 */ + }; + + pinctrl_lvds_converter: lcd-lvds { + fsl,pins = <IMX8QXP_FLEXCAN1_TX_LSIO_GPIO1_IO18 0x20>, /* SODIMM 55 */ + /* 6B/8B mode. Select LOW - 8B mode (24bit) */ + <IMX8QXP_FLEXCAN1_RX_LSIO_GPIO1_IO17 0x20>, /* SODIMM 63 */ + <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x20>, /* SODIMM 95 */ + <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x20>; /* SODIMM 99 */ + }; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + cap-power-off-card; + /delete-property/ no-1-8-v; + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi new file mode 100644 index 000000000000..5f30c88855e7 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V"; + }; +}; + +&colibri_gpio_keys { + status = "okay"; +}; + +/* Colibri FastEthernet */ +&fec1 { + status = "okay"; +}; + +/* Colibri I2C */ +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_iris>; + + pinctrl_gpio_iris: gpioirisgrp { + fsl,pins = <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x20>, /* SODIMM 98 */ + <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04 0x20>, /* SODIMM 133 */ + <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25 0x20>, /* SODIMM 103 */ + <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20>, /* SODIMM 101 */ + <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20>, /* SODIMM 97 */ + <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020>, /* SODIMM 85 */ + <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20>, /* SODIMM 79 */ + <IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041>; /* SODIMM 45 */ + }; + + pinctrl_uart1_forceoff: uart1forceoffgrp { + fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x20>; /* SODIMM 22 */ + }; + + pinctrl_uart23_forceoff: uart23forceoffgrp { + fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x20>; /* SODIMM 23 */ + }; +}; + +/* Colibri SPI */ +&lpspi2 { + status = "okay"; +}; + +/* Colibri UART_B */ +&lpuart0 { + status = "okay"; +}; + +/* Colibri UART_C */ +&lpuart2 { + status = "okay"; +}; + +/* Colibri UART_A */ +&lpuart3 { + status= "okay"; +}; + +&lsio_gpio3 { + /* + * This turns the LVDS transceiver on. If one wants to turn the + * transceiver off, that property has to be deleted and the gpio handled + * in userspace. + */ + lvds-tx-on-hog { + gpio-hog; + gpios = <18 0>; + output-high; + }; +}; + +/* Colibri PWM_B */ +&lsio_pwm0 { + status = "okay"; +}; + +/* Colibri PWM_C */ +&lsio_pwm1 { + status = "okay"; +}; + +/* Colibri PWM_D */ +&lsio_pwm2 { + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi new file mode 100644 index 000000000000..7cad79102e1a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi @@ -0,0 +1,776 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2019 Toradex + */ + +/ { + chosen { + stdout-path = &lpuart3; + }; + + colibri_gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + status = "disabled"; + + key-wakeup { + debounce-interval = <10>; + gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>; + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +/* TODO Analogue Inputs */ + +/* TODO Cooling maps for DX */ + +&cpu_alert0 { + hysteresis = <2000>; + temperature = <90000>; + type = "passive"; +}; + +&cpu_crit0 { + hysteresis = <2000>; + temperature = <105000>; + type = "critical"; +}; + +/* TODO flexcan1 - 3 */ + +/* TODO GPU */ + +/* On-module I2C */ +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>; + status = "okay"; + + /* Touch controller */ + touchscreen@2c { + compatible = "adi,ad7879-1"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ad7879_int>; + reg = <0x2c>; + interrupt-parent = <&lsio_gpio3>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + status = "disabled"; + }; +}; + +/* TODO i2c lvds0 accessible on FFC (X2) */ + +/* TODO i2c lvds1 accessible on FFC (X3) */ + +/* Colibri I2C */ +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; +}; + +&jpegdec { + status = "okay"; +}; + +&jpegenc { + status = "okay"; +}; + +/* TODO Parallel RRB */ + +/* Colibri UART_B */ +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; +}; + +/* Colibri UART_C */ +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; +}; + +/* Colibri UART_A */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; +}; + +/* Colibri FastEthernet */ +&fec1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <2>; + }; + }; +}; + +/* Colibri SPI */ +&lpspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi2>; + cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>; +}; + +&lsio_gpio0 { + gpio-line-names = "", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_68", + "", + "", + "SODIMM_82", + "SODIMM_56", + "SODIMM_28", + "SODIMM_30", + "", + "SODIMM_61", + "SODIMM_103", + "", + "", + "", + "SODIMM_25", + "SODIMM_27", + "SODIMM_100"; +}; + +&lsio_gpio1 { + gpio-line-names = "SODIMM_86", + "SODIMM_92", + "SODIMM_90", + "SODIMM_88", + "", + "", + "", + "SODIMM_59", + "", + "SODIMM_6", + "SODIMM_8", + "", + "", + "SODIMM_2", + "SODIMM_4", + "SODIMM_34", + "SODIMM_32", + "SODIMM_63", + "SODIMM_55", + "SODIMM_33", + "SODIMM_35", + "SODIMM_36", + "SODIMM_38", + "SODIMM_21", + "SODIMM_19", + "SODIMM_140", + "SODIMM_142", + "SODIMM_196", + "SODIMM_194", + "SODIMM_186", + "SODIMM_188", + "SODIMM_138"; +}; + +&lsio_gpio2 { + gpio-line-names = "SODIMM_23", + "", + "", + "SODIMM_144"; +}; + +&lsio_gpio3 { + gpio-line-names = "SODIMM_96", + "SODIMM_75", + "SODIMM_37", + "SODIMM_29", + "", + "", + "", + "", + "", + "SODIMM_43", + "SODIMM_45", + "SODIMM_69", + "SODIMM_71", + "SODIMM_73", + "SODIMM_77", + "SODIMM_89", + "SODIMM_93", + "SODIMM_95", + "SODIMM_99", + "SODIMM_105", + "SODIMM_107", + "SODIMM_98", + "SODIMM_102", + "SODIMM_104", + "SODIMM_106"; +}; + +&lsio_gpio4 { + gpio-line-names = "", + "", + "", + "SODIMM_129", + "SODIMM_133", + "SODIMM_127", + "SODIMM_131", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_44", + "", + "SODIMM_76", + "SODIMM_31", + "SODIMM_47", + "SODIMM_190", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&lsio_gpio5 { + gpio-line-names = "", + "SODIMM_57", + "SODIMM_65", + "SODIMM_85", + "", + "", + "", + "", + "SODIMM_135", + "SODIMM_137", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184"; +}; + +/* Colibri PWM_B */ +&lsio_pwm0 { + #pwm-cells = <3>; + pinctrl-0 = <&pinctrl_pwm_b>; + pinctrl-names = "default"; +}; + +/* Colibri PWM_C */ +&lsio_pwm1 { + #pwm-cells = <3>; + pinctrl-0 = <&pinctrl_pwm_c>; + pinctrl-names = "default"; +}; + +/* Colibri PWM_D */ +&lsio_pwm2 { + #pwm-cells = <3>; + pinctrl-0 = <&pinctrl_pwm_d>; + pinctrl-names = "default"; +}; + +/* TODO MIPI CSI */ + +/* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */ + +/* TODO on-module PCIe for Wi-Fi */ + +/* TODO On-module i2s / Audio */ + +/* On-module eMMC */ +&usdhc1 { + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_module_3v3>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; + disable-wp; + no-1-8-v; +}; + +/* TODO USB Client/Host */ + +/* TODO USB Host */ + +/* TODO VPU Encoder/Decoder */ + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>, + <&pinctrl_hog2>, <&pinctrl_lpspi2_cs2>; + + /* On-module touch pen-down interrupt */ + pinctrl_ad7879_int: ad7879intgrp { + fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 0x21>; + }; + + /* Colibri Analogue Inputs */ + pinctrl_adc0: adc0grp { + fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0 0x60>, /* SODIMM 8 */ + <IMX8QXP_ADC_IN1_ADMA_ADC_IN1 0x60>, /* SODIMM 6 */ + <IMX8QXP_ADC_IN4_ADMA_ADC_IN4 0x60>, /* SODIMM 4 */ + <IMX8QXP_ADC_IN5_ADMA_ADC_IN5 0x60>; /* SODIMM 2 */ + }; + + /* Atmel MXT touchsceen + Capacitive Touch Adapter */ + /* NOTE: This pingroup conflicts with pingroups + * pinctrl_pwm_b/pinctrl_pwm_c. Don't enable them + * simultaneously. + */ + pinctrl_atmel_adap: atmeladaptergrp { + fsl,pins = <IMX8QXP_UART1_RX_LSIO_GPIO0_IO22 0x21>, /* SODIMM 30 */ + <IMX8QXP_UART1_TX_LSIO_GPIO0_IO21 0x4000021>; /* SODIMM 28 */ + }; + + /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */ + pinctrl_atmel_conn: atmelconnectorgrp { + fsl,pins = <IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x4000021>, /* SODIMM 107 */ + <IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x21>; /* SODIMM 106 */ + }; + + pinctrl_can_int: canintgrp { + fsl,pins = <IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40>; /* SODIMM 73 */ + }; + + pinctrl_csi_ctl: csictlgrp { + fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x20>, /* SODIMM 77 */ + <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x20>; /* SODIMM 89 */ + }; + + pinctrl_csi_mclk: csimclkgrp { + fsl,pins = <IMX8QXP_CSI_MCLK_CI_PI_MCLK 0xC0000041>; /* SODIMM 75 / X3-12 */ + }; + + pinctrl_ext_io0: extio0grp { + fsl,pins = <IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08 0x06000040>; /* SODIMM 135 */ + }; + + /* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */ + pinctrl_fec1: fec1grp { + fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020>, + <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020>, + <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61>, + <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT 0x06000061>, + <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61>, + <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61>, + <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61>, + <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61>, + <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61>, + <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER 0x61>; + }; + + pinctrl_fec1_sleep: fec1slpgrp { + fsl,pins = <IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11 0x06000041>, + <IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10 0x06000041>, + <IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x41>, + <IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 0x41>, + <IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31 0x41>, + <IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x41>, + <IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04 0x41>, + <IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05 0x41>, + <IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06 0x41>, + <IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07 0x41>; + }; + + /* Colibri optional CAN on UART_B RTS/CTS */ + pinctrl_flexcan1: flexcan0grp { + fsl,pins = <IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21>, /* SODIMM 32 */ + <IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21>; /* SODIMM 34 */ + }; + + /* Colibri optional CAN on PS2 */ + pinctrl_flexcan2: flexcan1grp { + fsl,pins = <IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21>, /* SODIMM 55 */ + <IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21>; /* SODIMM 63 */ + }; + + /* Colibri optional CAN on UART_A TXD/RXD */ + pinctrl_flexcan3: flexcan2grp { + fsl,pins = <IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x21>, /* SODIMM 35 */ + <IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x21>; /* SODIMM 33 */ + }; + + /* Colibri LCD Back-Light GPIO */ + pinctrl_gpio_bl_on: gpioblongrp { + fsl,pins = <IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12 0x60>; /* SODIMM 71 */ + }; + + /* HDMI Hot Plug Detect on FFC (X2) */ + pinctrl_gpio_hpd: gpiohpdgrp { + fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31 0x20>; /* SODIMM 138 */ + }; + + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = <IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041>; /* SODIMM 45 */ + }; + + pinctrl_hog0: hog0grp { + fsl,pins = <IMX8QXP_CSI_D07_CI_PI_D09 0x61>, /* SODIMM 65 */ + <IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11 0x20>, /* SODIMM 69 */ + <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20>, /* SODIMM 79 */ + <IMX8QXP_CSI_D02_CI_PI_D04 0x61>, /* SODIMM 79 */ + <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020>, /* SODIMM 85 */ + <IMX8QXP_CSI_D06_CI_PI_D08 0x61>, /* SODIMM 85 */ + <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x20>, /* SODIMM 95 */ + <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20>, /* SODIMM 97 */ + <IMX8QXP_CSI_D03_CI_PI_D05 0x61>, /* SODIMM 97 */ + <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x20>, /* SODIMM 99 */ + <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20>, /* SODIMM 101 */ + <IMX8QXP_CSI_D00_CI_PI_D02 0x61>, /* SODIMM 101 */ + <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25 0x20>, /* SODIMM 103 */ + <IMX8QXP_CSI_D01_CI_PI_D03 0x61>, /* SODIMM 103 */ + <IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x20>, /* SODIMM 105 */ + <IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05 0x20>, /* SODIMM 127 */ + <IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06 0x20>, /* SODIMM 131 */ + <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04 0x20>, /* SODIMM 133 */ + <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00 0x20>, /* SODIMM 96 */ + <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x20>, /* SODIMM 98 */ + <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20>, /* SODIMM 100 */ + <IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22 0x20>, /* SODIMM 102 */ + <IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23 0x20>; /* SODIMM 104 */ + }; + + pinctrl_hog1: hog1grp { + fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20>, /* SODIMM 75 */ + <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20>; /* SODIMM 93 */ + }; + + pinctrl_hog2: hog2grp { + fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20>; /* SODIMM 75 */ + }; + + /* + * This pin is used in the SCFW as a UART. Using it from + * Linux would require rewritting the SCFW board file. + */ + pinctrl_hog_scfw: hogscfwgrp { + fsl,pins = <IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03 0x20>; /* SODIMM 144 */ + }; + + /* On Module I2C */ + pinctrl_i2c0: i2c0grp { + fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x06000021>, + <IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA 0x06000021>; + }; + + /* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */ + pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp { + fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020>, /* SODIMM 140 */ + <IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020>; /* SODIMM 142 */ + }; + + /* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */ + pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp { + fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020>, /* SODIMM 186 */ + <IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020>; /* SODIMM 188 */ + }; + + /* Colibri I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = <IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021>, /* SODIMM 196 */ + <IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021>; /* SODIMM 194 */ + }; + + /* Colibri Parallel RGB LCD Interface */ + pinctrl_lcdif: lcdifgrp { + fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK 0x60>, /* SODIMM 56 */ + <IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC 0x60>, /* SODIMM 68 */ + <IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC 0x60>, /* SODIMM 82 */ + <IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN 0x40>, /* SODIMM 44 */ + <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x40>, /* SODIMM 44 */ + <IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00 0x60>, /* SODIMM 76 */ + <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x60>, /* SODIMM 76 */ + <IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01 0x60>, /* SODIMM 70 */ + <IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02 0x60>, /* SODIMM 60 */ + <IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03 0x60>, /* SODIMM 58 */ + <IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04 0x60>, /* SODIMM 78 */ + <IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05 0x60>, /* SODIMM 72 */ + <IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06 0x60>, /* SODIMM 80 */ + <IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07 0x60>, /* SODIMM 46 */ + <IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08 0x60>, /* SODIMM 62 */ + <IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09 0x60>, /* SODIMM 48 */ + <IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10 0x60>, /* SODIMM 74 */ + <IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11 0x60>, /* SODIMM 50 */ + <IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 0x60>, /* SODIMM 52 */ + <IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13 0x60>, /* SODIMM 54 */ + <IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14 0x60>, /* SODIMM 66 */ + <IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15 0x60>, /* SODIMM 64 */ + <IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16 0x60>, /* SODIMM 57 */ + <IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x60>, /* SODIMM 57 */ + <IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17 0x60>; /* SODIMM 61 */ + }; + + /* Colibri SPI */ + pinctrl_lpspi2: lpspi2grp { + fsl,pins = <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x21>, /* SODIMM 86 */ + <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO 0x06000040>, /* SODIMM 92 */ + <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI 0x06000040>, /* SODIMM 90 */ + <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK 0x06000040>; /* SODIMM 88 */ + }; + + pinctrl_lpspi2_cs2: lpspi2cs2grp { + fsl,pins = <IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 0x21>; /* SODIMM 65 */ + }; + + /* Colibri UART_B */ + pinctrl_lpuart0: lpuart0grp { + fsl,pins = <IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020>, /* SODIMM 36 */ + <IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020>, /* SODIMM 38 */ + <IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020>, /* SODIMM 34 */ + <IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020>; /* SODIMM 32 */ + }; + + /* Colibri UART_C */ + pinctrl_lpuart2: lpuart2grp { + fsl,pins = <IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020>, /* SODIMM 19 */ + <IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020>; /* SODIMM 21 */ + }; + + /* Colibri UART_A */ + pinctrl_lpuart3: lpuart3grp { + fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020>, /* SODIMM 33 */ + <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020>; /* SODIMM 35 */ + }; + + /* Colibri UART_A Control */ + pinctrl_lpuart3_ctrl: lpuart3ctrlgrp { + fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x20>, /* SODIMM 23 */ + <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29 0x20>, /* SODIMM 25 */ + <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30 0x20>, /* SODIMM 27 */ + <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03 0x20>, /* SODIMM 29 */ + <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x20>, /* SODIMM 31 */ + <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02 0x20>; /* SODIMM 37 */ + }; + + /* On module wifi module */ + pinctrl_pcieb: pciebgrp { + fsl,pins = <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x04000061>, /* SODIMM 178 */ + <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000061>, /* SODIMM 94 */ + <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x60>; /* SODIMM 81 */ + }; + + /* Colibri PWM_A */ + pinctrl_pwm_a: pwmagrp { + /* both pins are connected together, reserve the unused CSI_D05 */ + fsl,pins = <IMX8QXP_CSI_D05_CI_PI_D07 0x61>, /* SODIMM 59 */ + <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT 0x60>; /* SODIMM 59 */ + }; + + /* Colibri PWM_B */ + pinctrl_pwm_b: pwmbgrp { + fsl,pins = <IMX8QXP_UART1_TX_LSIO_PWM0_OUT 0x60>; /* SODIMM 28 */ + }; + + /* Colibri PWM_C */ + pinctrl_pwm_c: pwmcgrp { + fsl,pins = <IMX8QXP_UART1_RX_LSIO_PWM1_OUT 0x60>; /* SODIMM 30 */ + }; + + /* Colibri PWM_D */ + pinctrl_pwm_d: pwmdgrp { + /* both pins are connected together, reserve the unused CSI_D04 */ + fsl,pins = <IMX8QXP_CSI_D04_CI_PI_D06 0x61>, /* SODIMM 67 */ + <IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT 0x60>; /* SODIMM 67 */ + }; + + /* On-module I2S */ + pinctrl_sai0: sai0grp { + fsl,pins = <IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD 0x06000040>, + <IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD 0x06000040>, + <IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC 0x06000040>, + <IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040>; + }; + + /* Colibri Audio Analogue Microphone GND */ + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06 0x41>; + }; + + /* On-module SGTL5000 clock */ + pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp { + fsl,pins = <IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0 0x21>; + }; + + /* On-module USB interrupt */ + pinctrl_usb3503a: usb3503agrp { + fsl,pins = <IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x61>; + }; + + /* Colibri USB Client Cable Detect */ + pinctrl_usbc_det: usbcdetgrp { + fsl,pins = <IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000040>; /* SODIMM 137 */ + }; + + /* USB Host Power Enable */ + pinctrl_usbh1_reg: usbh1reggrp { + fsl,pins = <IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000040>; /* SODIMM 129 */ + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041>, + <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21>, + <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21>, + <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21>, + <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21>, + <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21>, + <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21>, + <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21>, + <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21>, + <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21>, + <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41>, + <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21>; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041>, + <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21>, + <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21>, + <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21>, + <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21>, + <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21>, + <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21>, + <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21>, + <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21>, + <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21>, + <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41>, + <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21>; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041>, + <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21>, + <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21>, + <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21>, + <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21>, + <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21>, + <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21>, + <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21>, + <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21>, + <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21>, + <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41>, + <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21>; + }; + + /* Colibri SD/MMC Card Detect */ + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x06000021>; /* SODIMM 43 */ + }; + + pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp { + fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x60>; /* SODIMM 43 */ + }; + + /* Colibri SD/MMC Card */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, /* SODIMM 47 */ + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21>, /* SODIMM 190 */ + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21>, /* SODIMM 192 */ + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21>, /* SODIMM 49 */ + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21>, /* SODIMM 51 */ + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21>, /* SODIMM 53 */ + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, /* SODIMM 47 */ + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21>, /* SODIMM 190 */ + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21>, /* SODIMM 192 */ + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21>, /* SODIMM 49 */ + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21>, /* SODIMM 51 */ + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21>, /* SODIMM 53 */ + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, /* SODIMM 47 */ + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21>, /* SODIMM 190 */ + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21>, /* SODIMM 192 */ + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21>, /* SODIMM 49 */ + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21>, /* SODIMM 51 */ + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21>, /* SODIMM 53 */ + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21>; + }; + + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = <IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23 0x60>, /* SODIMM 47 */ + <IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24 0x60>, /* SODIMM 190 */ + <IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60>, /* SODIMM 192 */ + <IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60>, /* SODIMM 49 */ + <IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60>, /* SODIMM 51 */ + <IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60>, /* SODIMM 53 */ + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21>; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = <IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x20>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 2076f9c9983a..e8d49660ac85 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -153,6 +153,14 @@ nxp,no-divider; }; + tpm1: pwm@44310000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x44310000 0x1000>; + clocks = <&clk IMX93_CLK_TPM1_GATE>; + #pwm-cells = <3>; + status = "disabled"; + }; + tpm2: pwm@44320000 { compatible = "fsl,imx7ulp-pwm"; reg = <0x44320000 0x10000>; @@ -164,6 +172,8 @@ lpi2c1: i2c@44340000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x44340000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C1_GATE>, <&clk IMX93_CLK_BUS_AON>; @@ -174,6 +184,8 @@ lpi2c2: i2c@44350000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x44350000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C2_GATE>, <&clk IMX93_CLK_BUS_AON>; @@ -243,6 +255,22 @@ status = "okay"; }; + bbnsm: bbnsm@44440000 { + compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd"; + reg = <0x44440000 0x10000>; + + bbnsm_rtc: rtc { + compatible = "nxp,imx93-bbnsm-rtc"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + }; + + bbnsm_pwrkey: pwrkey { + compatible = "nxp,imx93-bbnsm-pwrkey"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + linux,code = <KEY_POWER>; + }; + }; + clk: clock-controller@44450000 { compatible = "fsl,imx93-ccm"; reg = <0x44450000 0x10000>; @@ -316,6 +344,14 @@ status = "disabled"; }; + tpm3: pwm@424e0000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x424e0000 0x1000>; + clocks = <&clk IMX93_CLK_TPM3_GATE>; + #pwm-cells = <3>; + status = "disabled"; + }; + tpm4: pwm@424f0000 { compatible = "fsl,imx7ulp-pwm"; reg = <0x424f0000 0x10000>; @@ -343,6 +379,8 @@ lpi2c3: i2c@42530000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x42530000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C3_GATE>, <&clk IMX93_CLK_BUS_WAKEUP>; @@ -353,6 +391,8 @@ lpi2c4: i2c@42540000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x42540000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C4_GATE>, <&clk IMX93_CLK_BUS_WAKEUP>; @@ -434,6 +474,21 @@ status = "disabled"; }; + flexspi1: spi@425e0000 { + compatible = "nxp,imx8mm-fspi"; + reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>, + <&clk IMX93_CLK_FLEXSPI1_GATE>; + clock-names = "fspi_en", "fspi"; + assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>; + status = "disabled"; + }; + lpuart7: serial@42690000 { compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42690000 0x1000>; @@ -455,6 +510,8 @@ lpi2c5: i2c@426b0000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x426b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C5_GATE>, <&clk IMX93_CLK_BUS_WAKEUP>; @@ -465,6 +522,8 @@ lpi2c6: i2c@426c0000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x426c0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C6_GATE>, <&clk IMX93_CLK_BUS_WAKEUP>; @@ -475,6 +534,8 @@ lpi2c7: i2c@426d0000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x426d0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C7_GATE>, <&clk IMX93_CLK_BUS_WAKEUP>; @@ -485,6 +546,8 @@ lpi2c8: i2c@426e0000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x426e0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C8_GATE>, <&clk IMX93_CLK_BUS_WAKEUP>; @@ -580,9 +643,9 @@ eqos: ethernet@428a0000 { compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; reg = <0x428a0000 0x10000>; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eth_wake_irq", "macirq"; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; clocks = <&clk IMX93_CLK_ENET_QOS_GATE>, <&clk IMX93_CLK_ENET_QOS_GATE>, <&clk IMX93_CLK_ENET_TIMER2>, @@ -595,7 +658,7 @@ <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; assigned-clock-rates = <100000000>, <250000000>; intf_mode = <&wakeupmix_gpr 0x28>; - clk_csr = <0>; + snps,clk-csr = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 058237681fe5..79ac09b58a89 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-gl-mv1000.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts new file mode 100644 index 000000000000..b1b45b4fa9d4 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-372x.dtsi" + +/ { + model = "GL.iNet GL-MV1000"; + compatible = "glinet,gl-mv1000", "marvell,armada3720"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + switch { + label = "switch"; + linux,code = <BTN_0>; + gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + vpn { + label = "green:vpn"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "green:wan"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "green:power"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0 0xf0000>; + }; + + partition@f0000 { + label = "u-boot-env"; + reg = <0xf0000 0x8000>; + }; + + factory: partition@f8000 { + label = "factory"; + reg = <0xf8000 0x8000>; + read-only; + }; + + partition@100000 { + label = "dtb"; + reg = <0x100000 0x10000>; + read-only; + }; + + partition@110000 { + label = "rescue"; + reg = <0x110000 0x1000000>; + }; + }; + }; +}; + +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + no-1-8-v; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + +&sdhci0 { + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + + nvmem-cells = <&macaddr_factory_6>; + nvmem-cell-names = "mac-address"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + + nvmem-cells = <&macaddr_factory_6>; + nvmem-cell-names = "mac-address"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + nvmem-cells = <&macaddr_factory_0>; + nvmem-cell-names = "mac-address"; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_factory_6: macaddr@6 { + reg = <0x6 0x6>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 7ca71f2d7afb..39ce6e25a8ef 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -455,4 +455,5 @@ phys = <&cp0_comphy5 2>; phy-names = "cp0-pcie2-x1-phy"; reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index 4e6d29ad32eb..2c920e22cec2 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -317,7 +317,7 @@ * first one that will have a critical trip point will be chosen. */ thermal-zones { - ap_thermal_ic: ap-thermal-ic { + ap_thermal_ic: ap-ic-thermal { polling-delay-passive = <0>; /* Interrupt driven */ polling-delay = <0>; /* Interrupt driven */ @@ -334,7 +334,7 @@ cooling-maps { }; }; - ap_thermal_cpu0: ap-thermal-cpu0 { + ap_thermal_cpu0: ap-cpu0-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; @@ -367,7 +367,7 @@ }; }; - ap_thermal_cpu1: ap-thermal-cpu1 { + ap_thermal_cpu1: ap-cpu1-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; @@ -400,7 +400,7 @@ }; }; - ap_thermal_cpu2: ap-thermal-cpu2 { + ap_thermal_cpu2: ap-cpu2-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; @@ -433,7 +433,7 @@ }; }; - ap_thermal_cpu3: ap-thermal-cpu3 { + ap_thermal_cpu3: ap-cpu3-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi index 8107d120a8a7..2f9ab6b4a2c9 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi @@ -54,7 +54,7 @@ <0x00d0000 0x1000>, /* GICH */ <0x00e0000 0x2000>; /* GICV */ - gic_its_ap0: interrupt-controller@3040000 { + gic_its_ap0: msi-controller@3040000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 7d0043824f2a..0cc9ee9871e7 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -25,7 +25,7 @@ * The cooling maps are empty as there are no cooling devices. */ thermal-zones { - CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) { + CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) { polling-delay-passive = <0>; /* Interrupt driven */ polling-delay = <0>; /* Interrupt driven */ diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi index 8e4ec243fb8f..32cfb3e2efc3 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -282,8 +282,9 @@ port@a { reg = <10>; - label = "cpu"; ethernet = <&cp0_eth0>; + phy-mode = "10gbase-r"; + managed = "in-band-status"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index d5cd7b3e09cf..c99c3372a4b5 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -52,4 +52,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 879dff24dcd3..ed1a9d319415 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -559,7 +559,7 @@ status = "disabled"; }; - nandc: nfi@1100e000 { + nandc: nand-controller@1100e000 { compatible = "mediatek,mt2712-nfc"; reg = <0 0x1100e000 0 0x1000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/mediatek/mt6357.dtsi b/arch/arm64/boot/dts/mediatek/mt6357.dtsi new file mode 100644 index 000000000000..3330a03c2f74 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6357.dtsi @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2020 MediaTek Inc. + * Copyright (c) 2023 BayLibre Inc. + */ + +#include <dt-bindings/input/input.h> + +&pwrap { + mt6357_pmic: pmic { + compatible = "mediatek,mt6357"; + + regulators { + mt6357_vproc_reg: buck-vproc { + regulator-name = "vproc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + + mt6357_vcore_reg: buck-vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + + mt6357_vmodem_reg: buck-vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + }; + + mt6357_vs1_reg: buck-vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2200000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + + mt6357_vpa_reg: buck-vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-ramp-delay = <50000>; + regulator-enable-ramp-delay = <220>; + }; + + mt6357_vfe28_reg: ldo-vfe28 { + compatible = "regulator-fixed"; + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vxo22_reg: ldo-vxo22 { + regulator-name = "vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2400000>; + regulator-enable-ramp-delay = <110>; + }; + + mt6357_vrf18_reg: ldo-vrf18 { + compatible = "regulator-fixed"; + regulator-name = "vrf18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <110>; + }; + + mt6357_vrf12_reg: ldo-vrf12 { + compatible = "regulator-fixed"; + regulator-name = "vrf12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <110>; + }; + + mt6357_vefuse_reg: ldo-vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcn33_bt_reg: ldo-vcn33-bt { + regulator-name = "vcn33-bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcn33_wifi_reg: ldo-vcn33-wifi { + regulator-name = "vcn33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcn28_reg: ldo-vcn28 { + compatible = "regulator-fixed"; + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcn18_reg: ldo-vcn18 { + compatible = "regulator-fixed"; + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcama_reg: ldo-vcama { + regulator-name = "vcama"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcamd_reg: ldo-vcamd { + regulator-name = "vcamd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcamio_reg: ldo-vcamio18 { + compatible = "regulator-fixed"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vldo28_reg: ldo-vldo28 { + regulator-name = "vldo28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vsram_others_reg: ldo-vsram-others { + regulator-name = "vsram-others"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <110>; + regulator-always-on; + }; + + mt6357_vsram_proc_reg: ldo-vsram-proc { + regulator-name = "vsram-proc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <110>; + regulator-always-on; + }; + + mt6357_vaux18_reg: ldo-vaux18 { + compatible = "regulator-fixed"; + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vaud28_reg: ldo-vaud28 { + compatible = "regulator-fixed"; + regulator-name = "vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vio28_reg: ldo-vio28 { + compatible = "regulator-fixed"; + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vio18_reg: ldo-vio18 { + compatible = "regulator-fixed"; + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + }; + + mt6357_vdram_reg: ldo-vdram { + regulator-name = "vdram"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <3300>; + }; + + mt6357_vmc_reg: ldo-vmc { + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + + mt6357_vmch_reg: ldo-vmch { + regulator-name = "vmch"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + + mt6357_vemc_reg: ldo-vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + regulator-always-on; + }; + + mt6357_vsim1_reg: ldo-vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vsim2_reg: ldo-vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vibr_reg: ldo-vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + + mt6357_vusb33_reg: ldo-vusb33 { + regulator-name = "vusb33"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + }; + + rtc { + compatible = "mediatek,mt6357-rtc"; + }; + + keys { + compatible = "mediatek,mt6357-keys"; + + key-power { + linux,keycodes = <KEY_POWER>; + wakeup-source; + }; + + key-home { + linux,keycodes = <KEY_HOME>; + wakeup-source; + }; + + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts index d3415527d389..507b5b567a36 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts +++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts @@ -5,6 +5,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "mt6795.dtsi" / { @@ -48,7 +49,172 @@ }; }; +&fhctl { + clocks = <&apmixedsys CLK_APMIXED_MAINPLL>, <&apmixedsys CLK_APMIXED_MPLL>, + <&apmixedsys CLK_APMIXED_MSDCPLL>; + mediatek,hopping-ssc-percent = <8>, <5>, <8>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + accelerometer@10 { + compatible = "bosch,bma255"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_pins>; + }; + + magnetometer@12 { + compatible = "bosch,bmm150"; + reg = <0x12>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_pins>; + syna,startup-delay-ms = <160>; + syna,reset-delay-ms = <90>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + + pn547: nfc@28 { + compatible = "nxp,pn544-i2c"; + reg = <0x28>; + interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&nfc_pins>; + enable-gpios = <&pio 149 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&pio 94 GPIO_ACTIVE_HIGH>; + }; + + proximity@48 { + compatible = "sensortek,stk3310"; + reg = <0x48>; + interrupts-extended = <&pio 8 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&proximity_pins>; + }; +}; + &pio { + nfc_pins: nfc-pins { + pins-irq { + pinmux = <PINMUX_GPIO3__FUNC_GPIO3>; + bias-pull-down; + input-enable; + }; + + pins-fw-ven { + pinmux = <PINMUX_GPIO94__FUNC_GPIO94>, + <PINMUX_GPIO149__FUNC_GPIO149>; + }; + }; + + ts_pins: touchscreen-pins { + pins-irq { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + bias-pull-up; + input-enable; + }; + + pins-rst { + pinmux = <PINMUX_GPIO102__FUNC_GPIO102>; + output-high; + }; + }; + + proximity_pins: proximity-pins { + pins-irq { + pinmux = <PINMUX_GPIO8__FUNC_GPIO8>; + bias-pull-up; + input-enable; + }; + }; + + accel_pins: accelerometer-pins { + pins-irq { + pinmux = <PINMUX_GPIO12__FUNC_GPIO12>; + bias-pull-up; + input-enable; + }; + }; + + i2c0_pins: i2c0-pins { + pins-bus { + pinmux = <PINMUX_GPIO45__FUNC_SDA0>, + <PINMUX_GPIO46__FUNC_SCL0>; + input-enable; + }; + }; + + i2c1_pins: i2c1-pins { + pins-bus { + pinmux = <PINMUX_GPIO125__FUNC_SDA1>, + <PINMUX_GPIO126__FUNC_SCL1>; + bias-disable; + }; + }; + + i2c2_pins: i2c2-pins { + pins-bus { + pinmux = <PINMUX_GPIO43__FUNC_SDA2>, + <PINMUX_GPIO44__FUNC_SCL2>; + bias-disable; + }; + }; + + i2c3_pins: i2c3-pins { + pins-bus { + pinmux = <PINMUX_GPIO136__FUNC_SDA3>, + <PINMUX_GPIO137__FUNC_SCL3>; + bias-disable; + }; + }; + + i2c4_pins: i2c4-pins { + pins-bus { + pinmux = <PINMUX_GPIO100__FUNC_SDA4>, + <PINMUX_GPIO101__FUNC_SCL4>; + bias-disable; + }; + }; + uart0_pins: uart0-pins { pins-rx { pinmux = <PINMUX_GPIO113__FUNC_URXD0>; diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi index b3fc76d837a9..17019fbea0af 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mediatek,mt6795-clk.h> #include <dt-bindings/pinctrl/mt6795-pinfunc.h> +#include <dt-bindings/power/mt6795-power.h> #include <dt-bindings/reset/mediatek,mt6795-resets.h> / { @@ -264,6 +265,84 @@ #reset-cells = <1>; }; + scpsys: syscon@10006000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + #power-domain-cells = <1>; + + /* System Power Manager */ + spm: power-controller { + compatible = "mediatek,mt6795-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domains of the SoC */ + power-domain@MT6795_POWER_DOMAIN_VDEC { + reg = <MT6795_POWER_DOMAIN_VDEC>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + power-domain@MT6795_POWER_DOMAIN_VENC { + reg = <MT6795_POWER_DOMAIN_VENC>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_SEL>; + clock-names = "mm", "venc"; + #power-domain-cells = <0>; + }; + power-domain@MT6795_POWER_DOMAIN_ISP { + reg = <MT6795_POWER_DOMAIN_ISP>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + + power-domain@MT6795_POWER_DOMAIN_MM { + reg = <MT6795_POWER_DOMAIN_MM>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + + power-domain@MT6795_POWER_DOMAIN_MJC { + reg = <MT6795_POWER_DOMAIN_MJC>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_MJC_SEL>; + clock-names = "mm", "mjc"; + #power-domain-cells = <0>; + }; + + power-domain@MT6795_POWER_DOMAIN_AUDIO { + reg = <MT6795_POWER_DOMAIN_AUDIO>; + #power-domain-cells = <0>; + }; + + mfg_async: power-domain@MT6795_POWER_DOMAIN_MFG_ASYNC { + reg = <MT6795_POWER_DOMAIN_MFG_ASYNC>; + clocks = <&clk26m>; + clock-names = "mfg"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT6795_POWER_DOMAIN_MFG_2D { + reg = <MT6795_POWER_DOMAIN_MFG_2D>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT6795_POWER_DOMAIN_MFG { + reg = <MT6795_POWER_DOMAIN_MFG>; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + }; + }; + }; + }; + pio: pinctrl@10005000 { compatible = "mediatek,mt6795-pinctrl"; reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>; @@ -310,6 +389,18 @@ clock-names = "clk13m"; }; + apmixedsys: syscon@10209000 { + compatible = "mediatek,mt6795-apmixedsys", "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + + fhctl: clock-controller@10209f00 { + compatible = "mediatek,mt6795-fhctl"; + reg = <0 0x10209f00 0 0x100>; + status = "disabled"; + }; + gic: interrupt-controller@10221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -433,6 +524,85 @@ status = "disabled"; }; + pwm2: pwm@11006000 { + compatible = "mediatek,mt6795-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM>, + <&pericfg CLK_PERI_PWM1>, + <&pericfg CLK_PERI_PWM2>, + <&pericfg CLK_PERI_PWM3>, + <&pericfg CLK_PERI_PWM4>, + <&pericfg CLK_PERI_PWM5>, + <&pericfg CLK_PERI_PWM6>, + <&pericfg CLK_PERI_PWM7>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3", + "pwm4", "pwm5", "pwm6", "pwm7"; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c"; + reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c"; + reg = <0 0x11008000 0 0x70>, <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c"; + reg = <0 0x11009000 0 0x70>, <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@11010000 { + compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c"; + reg = <0 0x11010000 0 0x70>, <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C3>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11011000 { + compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c"; + reg = <0 0x11011000 0 0x70>, <0 0x11000300 0 0x80>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C4>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt6795-mmc"; reg = <0 0x11230000 0 0x1000>; @@ -473,5 +643,17 @@ clock-names = "source", "hclk"; status = "disabled"; }; + + vdecsys: clock-controller@16000000 { + compatible = "mediatek,mt6795-vdecsys"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@18000000 { + compatible = "mediatek,mt6795-vencsys"; + reg = <0 0x18000000 0 0x1000>; + #clock-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 20129bc98e21..006cd639059f 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -539,7 +539,7 @@ }; }; - nandc: nfi@1100d000 { + nandc: nand-controller@1100d000 { compatible = "mediatek,mt7622-nfc"; reg = <0 0x1100D000 0 0x1000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi index 6a54315cf650..2374c0953057 100644 --- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi @@ -124,7 +124,7 @@ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; }; - mmsys: mmsys@14000000 { + mmsys: syscon@14000000 { compatible = "mediatek,mt8167-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index d452cab28c67..d77f6af19065 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -58,7 +58,7 @@ gpios = <&pio 69 GPIO_ACTIVE_LOW>; linux,code = <SW_LID>; linux,input-type = <EV_SW>; - gpio-key,wakeup; + wakeup-source; }; switch-power { @@ -66,7 +66,7 @@ gpios = <&pio 14 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; debounce-interval = <30>; - gpio-key,wakeup; + wakeup-source; }; switch-tablet-mode { @@ -74,7 +74,7 @@ gpios = <&pio 121 GPIO_ACTIVE_HIGH>; linux,code = <SW_TABLET_MODE>; linux,input-type = <EV_SW>; - gpio-key,wakeup; + wakeup-source; }; switch-volume-down { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index 52dc4a50e34d..3e3f4b1b00f0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -52,7 +52,6 @@ &gpu { mali-supply = <&mt6358_vgpu_reg>; - sram-supply = <&mt6358_vsram_gpu_reg>; }; &i2c0 { @@ -138,6 +137,22 @@ non-removable; }; +&mt6358_vgpu_reg { + regulator-min-microvolt = <625000>; + regulator-max-microvolt = <900000>; + + regulator-coupled-with = <&mt6358_vsram_gpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + +&mt6358_vsram_gpu_reg { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + + regulator-coupled-with = <&mt6358_vgpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + &pio { i2c_pins_0: i2c0{ pins_i2c{ diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index fbe14b13051a..63952c1251df 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -294,7 +294,6 @@ &gpu { mali-supply = <&mt6358_vgpu_reg>; - sram-supply = <&mt6358_vsram_gpu_reg>; }; &i2c0 { @@ -401,6 +400,14 @@ Avdd-supply = <&mt6358_vaud28_reg>; }; +&mt6358_vgpu_reg { + regulator-min-microvolt = <625000>; + regulator-max-microvolt = <900000>; + + regulator-coupled-with = <&mt6358_vsram_gpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + &mt6358_vsim1_reg { regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; @@ -411,6 +418,14 @@ regulator-max-microvolt = <2700000>; }; +&mt6358_vsram_gpu_reg { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + + regulator-coupled-with = <&mt6358_vgpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + &pio { aud_pins_default: audiopins { pins_bus { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts index a1d01639df30..526bcae7a3f8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -71,7 +71,6 @@ &gpu { mali-supply = <&mt6358_vgpu_reg>; - sram-supply = <&mt6358_vsram_gpu_reg>; }; &i2c0 { @@ -176,6 +175,22 @@ non-removable; }; +&mt6358_vgpu_reg { + regulator-min-microvolt = <625000>; + regulator-max-microvolt = <900000>; + + regulator-coupled-with = <&mt6358_vsram_gpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + +&mt6358_vsram_gpu_reg { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + + regulator-coupled-with = <&mt6358_vgpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + &pio { i2c_pins_0: i2c0 { pins_i2c{ diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 3d1d7870a5f1..5169779d01df 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -563,82 +563,82 @@ opp-300000000 { opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <625000>, <850000>; + opp-microvolt = <625000>; }; opp-320000000 { opp-hz = /bits/ 64 <320000000>; - opp-microvolt = <631250>, <850000>; + opp-microvolt = <631250>; }; opp-340000000 { opp-hz = /bits/ 64 <340000000>; - opp-microvolt = <637500>, <850000>; + opp-microvolt = <637500>; }; opp-360000000 { opp-hz = /bits/ 64 <360000000>; - opp-microvolt = <643750>, <850000>; + opp-microvolt = <643750>; }; opp-380000000 { opp-hz = /bits/ 64 <380000000>; - opp-microvolt = <650000>, <850000>; + opp-microvolt = <650000>; }; opp-400000000 { opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <656250>, <850000>; + opp-microvolt = <656250>; }; opp-420000000 { opp-hz = /bits/ 64 <420000000>; - opp-microvolt = <662500>, <850000>; + opp-microvolt = <662500>; }; opp-460000000 { opp-hz = /bits/ 64 <460000000>; - opp-microvolt = <675000>, <850000>; + opp-microvolt = <675000>; }; opp-500000000 { opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <687500>, <850000>; + opp-microvolt = <687500>; }; opp-540000000 { opp-hz = /bits/ 64 <540000000>; - opp-microvolt = <700000>, <850000>; + opp-microvolt = <700000>; }; opp-580000000 { opp-hz = /bits/ 64 <580000000>; - opp-microvolt = <712500>, <850000>; + opp-microvolt = <712500>; }; opp-620000000 { opp-hz = /bits/ 64 <620000000>; - opp-microvolt = <725000>, <850000>; + opp-microvolt = <725000>; }; opp-653000000 { opp-hz = /bits/ 64 <653000000>; - opp-microvolt = <743750>, <850000>; + opp-microvolt = <743750>; }; opp-698000000 { opp-hz = /bits/ 64 <698000000>; - opp-microvolt = <768750>, <868750>; + opp-microvolt = <768750>; }; opp-743000000 { opp-hz = /bits/ 64 <743000000>; - opp-microvolt = <793750>, <893750>; + opp-microvolt = <793750>; }; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <825000>, <925000>; + opp-microvolt = <825000>; }; }; @@ -1752,7 +1752,7 @@ }; gpu: gpu@13040000 { - compatible = "mediatek,mt8183-mali", "arm,mali-bifrost"; + compatible = "mediatek,mt8183b-mali", "arm,mali-bifrost"; reg = <0 0x13040000 0 0x4000>; interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>, diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index a0d3e1f731bd..78ff8ba5718e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -1075,6 +1075,23 @@ #clock-cells = <1>; }; + gpu: gpu@13040000 { + compatible = "mediatek,mt8186-mali", + "arm,mali-bifrost"; + reg = <0 0x13040000 0 0x4000>; + + clocks = <&mfgsys CLK_MFG_BG3D>; + interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + power-domains = <&spm MT8186_POWER_DOMAIN_MFG2>, + <&spm MT8186_POWER_DOMAIN_MFG3>; + power-domain-names = "core0", "core1"; + #cooling-cells = <2>; + status = "disabled"; + }; + mmsys: syscon@14000000 { compatible = "mediatek,mt8186-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index 9f12257ab4e7..5a440504d4f9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -275,6 +275,11 @@ remote-endpoint = <&anx7625_in>; }; +&gpu { + mali-supply = <&mt6315_7_vbuck1>; + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -380,6 +385,14 @@ pinctrl-0 = <&i2c7_pins>; }; +&mfg0 { + domain-supply = <&mt6315_7_vbuck1>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + &mipi_tx0 { status = "okay"; }; @@ -439,6 +452,13 @@ regulator-always-on; }; +&mt6359_vsram_others_ldo_reg { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + regulator-coupled-with = <&mt6315_7_vbuck1>; + regulator-coupled-max-spread = <10000>; +}; + &mt6359_vufs_ldo_reg { regulator-always-on; }; @@ -1400,9 +1420,11 @@ regulator-compatible = "vbuck1"; regulator-name = "Vgpu"; regulator-min-microvolt = <606250>; - regulator-max-microvolt = <1193750>; + regulator-max-microvolt = <800000>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; + regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>; + regulator-coupled-max-spread = <10000>; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 87b91c8feaf9..5c30caf74026 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -312,6 +312,91 @@ clock-frequency = <13000000>; }; + gpu_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + opp-microvolt = <606250>; + }; + + opp-399000000 { + opp-hz = /bits/ 64 <399000000>; + opp-microvolt = <618750>; + }; + + opp-440000000 { + opp-hz = /bits/ 64 <440000000>; + opp-microvolt = <631250>; + }; + + opp-482000000 { + opp-hz = /bits/ 64 <482000000>; + opp-microvolt = <643750>; + }; + + opp-523000000 { + opp-hz = /bits/ 64 <523000000>; + opp-microvolt = <656250>; + }; + + opp-564000000 { + opp-hz = /bits/ 64 <564000000>; + opp-microvolt = <668750>; + }; + + opp-605000000 { + opp-hz = /bits/ 64 <605000000>; + opp-microvolt = <681250>; + }; + + opp-647000000 { + opp-hz = /bits/ 64 <647000000>; + opp-microvolt = <693750>; + }; + + opp-688000000 { + opp-hz = /bits/ 64 <688000000>; + opp-microvolt = <706250>; + }; + + opp-724000000 { + opp-hz = /bits/ 64 <724000000>; + opp-microvolt = <725000>; + }; + + opp-748000000 { + opp-hz = /bits/ 64 <748000000>; + opp-microvolt = <737500>; + }; + + opp-772000000 { + opp-hz = /bits/ 64 <772000000>; + opp-microvolt = <750000>; + }; + + opp-795000000 { + opp-hz = /bits/ 64 <795000000>; + opp-microvolt = <762500>; + }; + + opp-819000000 { + opp-hz = /bits/ 64 <819000000>; + opp-microvolt = <775000>; + }; + + opp-843000000 { + opp-hz = /bits/ 64 <843000000>; + opp-microvolt = <787500>; + }; + + opp-866000000 { + opp-hz = /bits/ 64 <866000000>; + opp-microvolt = <800000>; + }; + }; + soc { #address-cells = <2>; #size-cells = <2>; @@ -412,15 +497,16 @@ #power-domain-cells = <0>; }; - power-domain@MT8192_POWER_DOMAIN_MFG0 { + mfg0: power-domain@MT8192_POWER_DOMAIN_MFG0 { reg = <MT8192_POWER_DOMAIN_MFG0>; - clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>; - clock-names = "mfg"; + clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>, + <&topckgen CLK_TOP_MFG_REF_SEL>; + clock-names = "mfg", "alt"; #address-cells = <1>; #size-cells = <0>; #power-domain-cells = <1>; - power-domain@MT8192_POWER_DOMAIN_MFG1 { + mfg1: power-domain@MT8192_POWER_DOMAIN_MFG1 { reg = <MT8192_POWER_DOMAIN_MFG1>; mediatek,infracfg = <&infracfg>; #address-cells = <1>; @@ -1266,6 +1352,28 @@ status = "disabled"; }; + gpu: gpu@13000000 { + compatible = "mediatek,mt8192-mali", "arm,mali-valhall-jm"; + reg = <0 0x13000000 0 0x4000>; + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + + clocks = <&apmixedsys CLK_APMIXED_MFGPLL>; + + power-domains = <&spm MT8192_POWER_DOMAIN_MFG2>, + <&spm MT8192_POWER_DOMAIN_MFG3>, + <&spm MT8192_POWER_DOMAIN_MFG4>, + <&spm MT8192_POWER_DOMAIN_MFG5>, + <&spm MT8192_POWER_DOMAIN_MFG6>; + power-domain-names = "core0", "core1", "core2", "core3", "core4"; + + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + }; + mfgcfg: clock-controller@13fbf000 { compatible = "mediatek,mt8192-mfgcfg"; reg = <0 0x13fbf000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 56749cfe7c33..8ac80a136c37 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -22,6 +22,16 @@ serial0 = &uart0; }; + backlight_lcd0: backlight-lcd0 { + compatible = "pwm-backlight"; + brightness-levels = <0 1023>; + default-brightness-level = <576>; + enable-gpios = <&pio 82 GPIO_ACTIVE_HIGH>; + num-interpolated-steps = <1023>; + pwms = <&disp_pwm0 0 500000>; + power-supply = <&ppvar_sys>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -212,6 +222,13 @@ }; }; +&disp_pwm0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&disp_pwm0_pin_default>; +}; + &dp_tx { status = "okay"; @@ -238,6 +255,11 @@ }; }; +&gpu { + status = "okay"; + mali-supply = <&mt6315_7_vbuck1>; +}; + &i2c0 { status = "okay"; @@ -648,6 +670,13 @@ }; }; + disp_pwm0_pin_default: disp-pwm0-default-pins { + pins-disp-pwm { + pinmux = <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO97__FUNC_DISP_PWM0>; + }; + }; + dptx_pin: dptx-default-pins { pins-cmd-dat { pinmux = <PINMUX_GPIO18__FUNC_DP_TX_HPD>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 8f1264d5290b..8652f41403ae 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/pinctrl/mt8195-pinfunc.h> #include <dt-bindings/power/mt8195-power.h> #include <dt-bindings/reset/mt8195-resets.h> +#include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/thermal/mediatek,lvts-thermal.h> / { compatible = "mediatek,mt8195"; @@ -24,6 +26,22 @@ aliases { gce0 = &gce0; gce1 = &gce1; + ethdr0 = ðdr0; + mutex0 = &mutex; + mutex1 = &mutex1; + merge1 = &merge1; + merge2 = &merge2; + merge3 = &merge3; + merge4 = &merge4; + merge5 = &merge5; + vdo1-rdma0 = &vdo1_rdma0; + vdo1-rdma1 = &vdo1_rdma1; + vdo1-rdma2 = &vdo1_rdma2; + vdo1-rdma3 = &vdo1_rdma3; + vdo1-rdma4 = &vdo1_rdma4; + vdo1-rdma5 = &vdo1_rdma5; + vdo1-rdma6 = &vdo1_rdma6; + vdo1-rdma7 = &vdo1_rdma7; }; cpus { @@ -333,6 +351,76 @@ #performance-domain-cells = <1>; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-390000000 { + opp-hz = /bits/ 64 <390000000>; + opp-microvolt = <625000>; + }; + opp-410000000 { + opp-hz = /bits/ 64 <410000000>; + opp-microvolt = <631250>; + }; + opp-431000000 { + opp-hz = /bits/ 64 <431000000>; + opp-microvolt = <631250>; + }; + opp-473000000 { + opp-hz = /bits/ 64 <473000000>; + opp-microvolt = <637500>; + }; + opp-515000000 { + opp-hz = /bits/ 64 <515000000>; + opp-microvolt = <637500>; + }; + opp-556000000 { + opp-hz = /bits/ 64 <556000000>; + opp-microvolt = <643750>; + }; + opp-598000000 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <650000>; + }; + opp-640000000 { + opp-hz = /bits/ 64 <640000000>; + opp-microvolt = <650000>; + }; + opp-670000000 { + opp-hz = /bits/ 64 <670000000>; + opp-microvolt = <662500>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <675000>; + }; + opp-730000000 { + opp-hz = /bits/ 64 <730000000>; + opp-microvolt = <687500>; + }; + opp-760000000 { + opp-hz = /bits/ 64 <760000000>; + opp-microvolt = <700000>; + }; + opp-790000000 { + opp-hz = /bits/ 64 <790000000>; + opp-microvolt = <712500>; + }; + opp-820000000 { + opp-hz = /bits/ 64 <820000000>; + opp-microvolt = <725000>; + }; + opp-850000000 { + opp-hz = /bits/ 64 <850000000>; + opp-microvolt = <737500>; + }; + opp-880000000 { + opp-hz = /bits/ 64 <880000000>; + opp-microvolt = <750000>; + }; + }; + pmu-a55 { compatible = "arm,cortex-a55-pmu"; interrupt-parent = <&gic>; @@ -446,8 +534,9 @@ power-domain@MT8195_POWER_DOMAIN_MFG1 { reg = <MT8195_POWER_DOMAIN_MFG1>; - clocks = <&apmixedsys CLK_APMIXED_MFGPLL>; - clock-names = "mfg"; + clocks = <&apmixedsys CLK_APMIXED_MFGPLL>, + <&topckgen CLK_TOP_MFG_CORE_TMP>; + clock-names = "mfg", "alt"; mediatek,infracfg = <&infracfg_ao>; #address-cells = <1>; #size-cells = <0>; @@ -1018,6 +1107,40 @@ status = "disabled"; }; + lvts_ap: thermal-sensor@1100b000 { + compatible = "mediatek,mt8195-lvts-ap"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; + resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>; + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>; + nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2"; + #thermal-sensor-cells = <1>; + }; + + disp_pwm0: pwm@1100e000 { + compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_DISP_PWM0>, + <&infracfg_ao CLK_INFRA_AO_DISP_PWM>; + clock-names = "main", "mm"; + status = "disabled"; + }; + + disp_pwm1: pwm@1100f000 { + compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm"; + reg = <0 0x1100f000 0 0x1000>; + interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH 0>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_DISP_PWM1>, + <&infracfg_ao CLK_INFRA_AO_DISP_PWM1>; + clock-names = "main", "mm"; + status = "disabled"; + }; + spi1: spi@11010000 { compatible = "mediatek,mt8195-spi", "mediatek,mt6765-spi"; @@ -1270,6 +1393,17 @@ status = "disabled"; }; + lvts_mcu: thermal-sensor@11278000 { + compatible = "mediatek,mt8195-lvts-mcu"; + reg = <0 0x11278000 0 0x1000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; + resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>; + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>; + nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2"; + #thermal-sensor-cells = <1>; + }; + xhci1: usb@11290000 { compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci"; @@ -1789,18 +1923,47 @@ status = "disabled"; }; + gpu: gpu@13000000 { + compatible = "mediatek,mt8195-mali", "mediatek,mt8192-mali", + "arm,mali-valhall-jm"; + reg = <0 0x13000000 0 0x4000>; + + clocks = <&mfgcfg CLK_MFG_BG3D>; + interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&spm MT8195_POWER_DOMAIN_MFG2>, + <&spm MT8195_POWER_DOMAIN_MFG3>, + <&spm MT8195_POWER_DOMAIN_MFG4>, + <&spm MT8195_POWER_DOMAIN_MFG5>, + <&spm MT8195_POWER_DOMAIN_MFG6>; + power-domain-names = "core0", "core1", "core2", "core3", "core4"; + status = "disabled"; + }; + mfgcfg: clock-controller@13fbf000 { compatible = "mediatek,mt8195-mfgcfg"; reg = <0 0x13fbf000 0 0x1000>; #clock-cells = <1>; }; - vppsys0: clock-controller@14000000 { - compatible = "mediatek,mt8195-vppsys0"; + vppsys0: syscon@14000000 { + compatible = "mediatek,mt8195-vppsys0", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; }; + mutex@1400f000 { + compatible = "mediatek,mt8195-vpp-mutex"; + reg = <0 0x1400f000 0 0x1000>; + interrupts = <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xf000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MUTEX>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + smi_sub_common_vpp0_vpp1_2x1: smi@14010000 { compatible = "mediatek,mt8195-smi-sub-common"; reg = <0 0x14010000 0 0x1000>; @@ -1900,12 +2063,21 @@ power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>; }; - vppsys1: clock-controller@14f00000 { - compatible = "mediatek,mt8195-vppsys1"; + vppsys1: syscon@14f00000 { + compatible = "mediatek,mt8195-vppsys1", "syscon"; reg = <0 0x14f00000 0 0x1000>; #clock-cells = <1>; }; + mutex@14f01000 { + compatible = "mediatek,mt8195-vpp-mutex"; + reg = <0 0x14f01000 0 0x1000>; + interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x1000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_DISP_MUTEX>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + larb5: larb@14f02000 { compatible = "mediatek,mt8195-smi-larb"; reg = <0 0x14f02000 0 0x1000>; @@ -2557,7 +2729,10 @@ vdosys1: syscon@1c100000 { compatible = "mediatek,mt8195-vdosys1", "syscon"; reg = <0 0x1c100000 0 0x1000>; + mboxes = <&gce0 1 CMDQ_THR_PRIO_4>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x0000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; smi_common_vdo: smi@1c01b000 { @@ -2586,6 +2761,17 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; }; + mutex1: mutex@1c101000 { + compatible = "mediatek,mt8195-disp-mutex"; + reg = <0 0x1c101000 0 0x1000>; + reg-names = "vdo1_mutex"; + interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>; + clock-names = "vdo1_mutex"; + mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>; + }; + larb2: larb@1c102000 { compatible = "mediatek,mt8195-smi-larb"; reg = <0 0x1c102000 0 0x1000>; @@ -2610,6 +2796,151 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; }; + vdo1_rdma0: rdma@1c104000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c104000 0 0x1000>; + interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>; + }; + + vdo1_rdma1: rdma@1c105000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c105000 0 0x1000>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA1>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>; + }; + + vdo1_rdma2: rdma@1c106000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c106000 0 0x1000>; + interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA2>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>; + }; + + vdo1_rdma3: rdma@1c107000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c107000 0 0x1000>; + interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA3>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>; + }; + + vdo1_rdma4: rdma@1c108000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c108000 0 0x1000>; + interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA4>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>; + }; + + vdo1_rdma5: rdma@1c109000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c109000 0 0x1000>; + interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA5>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>; + }; + + vdo1_rdma6: rdma@1c10a000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c10a000 0 0x1000>; + interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA6>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>; + }; + + vdo1_rdma7: rdma@1c10b000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c10b000 0 0x1000>; + interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA7>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>; + }; + + merge1: vpp-merge@1c10c000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c10c000 0 0x1000>; + interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE0>, + <&vdosys1 CLK_VDO1_MERGE0_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xc000 0x1000>; + mediatek,merge-mute = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE0_DL_ASYNC>; + }; + + merge2: vpp-merge@1c10d000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c10d000 0 0x1000>; + interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE1>, + <&vdosys1 CLK_VDO1_MERGE1_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xd000 0x1000>; + mediatek,merge-mute = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE1_DL_ASYNC>; + }; + + merge3: vpp-merge@1c10e000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c10e000 0 0x1000>; + interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE2>, + <&vdosys1 CLK_VDO1_MERGE2_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xe000 0x1000>; + mediatek,merge-mute = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE2_DL_ASYNC>; + }; + + merge4: vpp-merge@1c10f000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c10f000 0 0x1000>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE3>, + <&vdosys1 CLK_VDO1_MERGE3_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xf000 0x1000>; + mediatek,merge-mute = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE3_DL_ASYNC>; + }; + + merge5: vpp-merge@1c110000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c110000 0 0x1000>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>, + <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x0000 0x1000>; + mediatek,merge-fifo-en = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>; + }; + dp_intf1: dp-intf@1c113000 { compatible = "mediatek,mt8195-dp-intf"; reg = <0 0x1c113000 0 0x1000>; @@ -2622,6 +2953,54 @@ status = "disabled"; }; + ethdr0: hdr-engine@1c114000 { + compatible = "mediatek,mt8195-disp-ethdr"; + reg = <0 0x1c114000 0 0x1000>, + <0 0x1c115000 0 0x1000>, + <0 0x1c117000 0 0x1000>, + <0 0x1c119000 0 0x1000>, + <0 0x1c11a000 0 0x1000>, + <0 0x1c11b000 0 0x1000>, + <0 0x1c11c000 0 0x1000>; + reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1", + "vdo_be", "adl_ds"; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>; + clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE0>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE1>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE0>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE1>, + <&vdosys1 CLK_VDO1_HDR_VDO_BE>, + <&vdosys1 CLK_VDO1_26M_SLOW>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>, + <&topckgen CLK_TOP_ETHDR>; + clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1", + "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async", + "gfx_fe0_async", "gfx_fe1_async","vdo_be_async", + "ethdr_top"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>, + <&iommu_vpp M4U_PORT_L3_HDR_ADL>; + interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */ + resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>; + reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async", + "gfx_fe1_async", "vdo_be_async"; + }; + edp_tx: edp-tx@1c500000 { compatible = "mediatek,mt8195-edp-tx"; reg = <0 0x1c500000 0 0x8000>; @@ -2644,4 +3023,246 @@ status = "disabled"; }; }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>; + + trips { + cpu0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU1>; + + trips { + cpu1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU2>; + + trips { + cpu2_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU3>; + + trips { + cpu3_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU0>; + + trips { + cpu4_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU1>; + + trips { + cpu5_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU2>; + + trips { + cpu6_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU3>; + + trips { + cpu7_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts new file mode 100644 index 000000000000..ceb48eb1a6e6 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021-2022 BayLibre, SAS. + * Authors: + * Fabien Parent <fparent@baylibre.com> + * Bernhard Rosenkränzer <bero@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/mt8365-pinfunc.h> +#include "mt8365.dtsi" + +/ { + model = "MediaTek MT8365 Open Platform EVK"; + compatible = "mediatek,mt8365-evk", "mediatek,mt8365"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; + + key-volume-up { + gpios = <&pio 24 GPIO_ACTIVE_LOW>; + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0xc0000000>; + }; + + usb_otg_vbus: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: secmon@43000000 { + no-map; + reg = <0 0x43000000 0 0x30000>; + }; + + /* 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pio { + gpio_keys: gpio-keys-pins { + pins { + pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>; + bias-pull-up; + input-enable; + }; + }; + + i2c0_pins: i2c0-pins { + pins { + pinmux = <MT8365_PIN_57_SDA0__FUNC_SDA0_0>, + <MT8365_PIN_58_SCL0__FUNC_SCL0_0>; + bias-pull-up; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>, + <MT8365_PIN_36_UTXD0__FUNC_UTXD0>; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>, + <MT8365_PIN_38_UTXD1__FUNC_UTXD1>; + }; + }; + + uart2_pins: uart2-pins { + pins { + pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>, + <MT8365_PIN_40_UTXD2__FUNC_UTXD2>; + }; + }; + + usb_pins: usb-pins { + id-pins { + pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>; + input-enable; + bias-pull-up; + }; + + usb0-vbus-pins { + pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>; + output-high; + }; + + usb1-vbus-pins { + pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>; + output-high; + }; + }; + + pwm_pins: pwm-pins { + pins { + pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>, + <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>; + }; + }; +}; + +&pwm { + pinctrl-0 = <&pwm_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi new file mode 100644 index 000000000000..1f6b48359115 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -0,0 +1,488 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * (C) 2018 MediaTek Inc. + * Copyright (C) 2022 BayLibre SAS + * Fabien Parent <fparent@baylibre.com> + * Bernhard Rosenkränzer <bero@baylibre.com> + */ +#include <dt-bindings/clock/mediatek,mt8365-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> + +/ { + compatible = "mediatek,mt8365"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + #cooling-cells = <2>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + #cooling-cells = <2>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + #cooling-cells = <2>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + #cooling-cells = <2>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + cache-unified; + }; + }; + + clk26m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x10000>, /* GICD */ + <0 0x0c080000 0 0x80000>, /* GICR */ + <0 0x0c400000 0 0x2000>, /* GICC */ + <0 0x0c410000 0 0x1000>, /* GICH */ + <0 0x0c420000 0 0x2000>; /* GICV */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8365-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt8365-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8365-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + + syscfg_pctl: syscfg-pctl@10005000 { + compatible = "mediatek,mt8365-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + pio: pinctrl@1000b000 { + compatible = "mediatek,mt8365-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8365-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt8365-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_IFR_PWRAP_SPI>, + <&infracfg CLK_IFR_PMIC_AP>, + <&infracfg CLK_IFR_PWRAP_SYS>, + <&infracfg CLK_IFR_PWRAP_TMR>; + clock-names = "spi", "wrap", "sys", "tmr"; + }; + + keypad: keypad@10010000 { + compatible = "mediatek,mt6779-keypad"; + reg = <0 0x10010000 0 0x1000>; + wakeup-source; + interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk26m>; + clock-names = "kpd"; + status = "disabled"; + }; + + mcucfg: syscon@10200000 { + compatible = "mediatek,mt8365-mcucfg", "syscon"; + reg = <0 0x10200000 0 0x2000>; + #clock-cells = <1>; + }; + + sysirq: interrupt-controller@10200a80 { + compatible = "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200a80 0 0x20>; + }; + + infracfg_nao: infracfg@1020e000 { + compatible = "mediatek,mt8365-infracfg", "syscon"; + reg = <0 0x1020e000 0 0x1000>; + #clock-cells = <1>; + }; + + rng: rng@1020f000 { + compatible = "mediatek,mt8365-rng", "mediatek,mt7623-rng"; + reg = <0 0x1020f000 0 0x100>; + clocks = <&infracfg CLK_IFR_TRNG>; + clock-names = "rng"; + }; + + apdma: dma-controller@11000280 { + compatible = "mediatek,mt8365-uart-dma", "mediatek,mt6577-uart-dma"; + reg = <0 0x11000280 0 0x80>, + <0 0x11000300 0 0x80>, + <0 0x11000380 0 0x80>, + <0 0x11000400 0 0x80>, + <0 0x11000580 0 0x80>, + <0 0x11000600 0 0x80>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + dma-requests = <6>; + clocks = <&infracfg CLK_IFR_AP_DMA>; + clock-names = "apdma"; + #dma-cells = <1>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>; + clock-names = "baud", "bus"; + dmas = <&apdma 0>, <&apdma 1>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>; + clock-names = "baud", "bus"; + dmas = <&apdma 2>, <&apdma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>; + clock-names = "baud", "bus"; + dmas = <&apdma 4>, <&apdma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + pwm: pwm@11006000 { + compatible = "mediatek,mt8365-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_IFR_PWM_HCLK>, + <&infracfg CLK_IFR_PWM>, + <&infracfg CLK_IFR_PWM1>, + <&infracfg CLK_IFR_PWM2>, + <&infracfg CLK_IFR_PWM3>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C0_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C1_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C2_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi: spi@1100a000 { + compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi"; + reg = <0 0x1100a000 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_IFR_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + i2c3: i2c@1100f000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C3_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssusb: usb@11201000 { + compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3"; + reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u2port1 PHY_TYPE_USB2>; + clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>, + <&infracfg CLK_IFR_SSUSB_REF>, + <&infracfg CLK_IFR_SSUSB_SYS>, + <&infracfg CLK_IFR_ICUSB>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host: usb@11200000 { + compatible = "mediatek,mt8365-xhci", "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>, + <&infracfg CLK_IFR_SSUSB_REF>, + <&infracfg CLK_IFR_SSUSB_SYS>, + <&infracfg CLK_IFR_ICUSB>, + <&infracfg CLK_IFR_SSUSB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", + "dma_ck", "xhci_ck"; + status = "disabled"; + }; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11230000 0 0x1000>, + <0 0x11cd0000 0 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>, + <&infracfg CLK_IFR_MSDC0_HCLK>, + <&infracfg CLK_IFR_MSDC0_SRC>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11240000 0 0x1000>, + <0 0x11c90000 0 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>, + <&infracfg CLK_IFR_MSDC1_HCLK>, + <&infracfg CLK_IFR_MSDC1_SRC>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc2: mmc@11250000 { + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11250000 0 0x1000>, + <0 0x11c60000 0 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>, + <&infracfg CLK_IFR_MSDC2_HCLK>, + <&infracfg CLK_IFR_MSDC2_SRC>, + <&infracfg CLK_IFR_MSDC2_BK>, + <&infracfg CLK_IFR_AP_MSDC0>; + clock-names = "source", "hclk", "source_cg", + "bus_clk", "sys_cg"; + status = "disabled"; + }; + + ethernet: ethernet@112a0000 { + compatible = "mediatek,mt8365-eth"; + reg = <0 0x112a0000 0 0x1000>; + mediatek,pericfg = <&infracfg>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_ETH_SEL>, + <&infracfg CLK_IFR_NIC_AXI>, + <&infracfg CLK_IFR_NIC_SLV_AXI>; + clock-names = "core", "reg", "trans"; + status = "disabled"; + }; + + u3phy: t-phy@11cc0000 { + compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11cc0000 0x9000>; + + u2port0: usb-phy@0 { + reg = <0x0 0x400>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>, + <&topckgen CLK_TOP_USB20_48M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u2port1: usb-phy@1000 { + reg = <0x1000 0x400>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>, + <&topckgen CLK_TOP_USB20_48M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + systimer: timer@10017000 { + compatible = "mediatek,mt8365-systimer", "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x100>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&system_clk>; + clock-names = "clk13m"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index bc34c9d8846a..1406d5d40b8f 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -9,6 +9,7 @@ DTC_FLAGS_tegra194-p2972-0000 := -@ DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@ DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@ DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@ +DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb @@ -24,3 +25,4 @@ dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index c017764bc27e..8b78be8f4f9d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -338,9 +338,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_UARTA>; - clock-names = "serial"; resets = <&tegra_car 6>; - reset-names = "serial"; dmas = <&apbdma 8>, <&apbdma 8>; dma-names = "rx", "tx"; status = "disabled"; @@ -352,9 +350,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_UARTB>; - clock-names = "serial"; resets = <&tegra_car 7>; - reset-names = "serial"; dmas = <&apbdma 9>, <&apbdma 9>; dma-names = "rx", "tx"; status = "disabled"; @@ -366,9 +362,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_UARTC>; - clock-names = "serial"; resets = <&tegra_car 55>; - reset-names = "serial"; dmas = <&apbdma 10>, <&apbdma 10>; dma-names = "rx", "tx"; status = "disabled"; @@ -380,9 +374,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_UARTD>; - clock-names = "serial"; resets = <&tegra_car 65>; - reset-names = "serial"; dmas = <&apbdma 19>, <&apbdma 19>; dma-names = "rx", "tx"; status = "disabled"; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index a4264ea41728..e2d6857a3709 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -145,6 +145,7 @@ /* SDMMC3 (SDIO) */ mmc@3440000 { status = "okay"; + vqmmc-supply = <&vddio_sdmmc3>; }; /* SDMMC4 (eMMC) */ diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index efc450821398..7e4c496fd91c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -610,9 +610,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_UARTA>; - clock-names = "serial"; resets = <&bpmp TEGRA186_RESET_UARTA>; - reset-names = "serial"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 133dbe5b429d..154fc8c0eb6d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -22,7 +22,7 @@ #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>; + ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; apbmisc: misc@100000 { compatible = "nvidia,tegra194-misc"; @@ -745,9 +745,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTA>; - clock-names = "serial"; resets = <&bpmp TEGRA194_RESET_UARTA>; - reset-names = "serial"; status = "disabled"; }; @@ -757,9 +755,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTB>; - clock-names = "serial"; resets = <&bpmp TEGRA194_RESET_UARTB>; - reset-names = "serial"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 980565bf02c9..0e463b3cbe01 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -618,9 +618,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTA>; - clock-names = "serial"; resets = <&tegra_car 6>; - reset-names = "serial"; dmas = <&apbdma 8>, <&apbdma 8>; dma-names = "rx", "tx"; status = "disabled"; @@ -632,9 +630,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTB>; - clock-names = "serial"; resets = <&tegra_car 7>; - reset-names = "serial"; dmas = <&apbdma 9>, <&apbdma 9>; dma-names = "rx", "tx"; status = "disabled"; @@ -646,9 +642,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTC>; - clock-names = "serial"; resets = <&tegra_car 55>; - reset-names = "serial"; dmas = <&apbdma 10>, <&apbdma 10>; dma-names = "rx", "tx"; status = "disabled"; @@ -660,9 +654,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTD>; - clock-names = "serial"; resets = <&tegra_car 65>; - reset-names = "serial"; dmas = <&apbdma 19>, <&apbdma 19>; dma-names = "rx", "tx"; status = "disabled"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index 8a9747855d6b..caa9e952a149 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -3,6 +3,7 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/sound/rt5640.h> #include "tegra234-p3701-0000.dtsi" #include "tegra234-p3737-0000.dtsi" @@ -49,7 +50,7 @@ i2s1_dap: endpoint { dai-format = "i2s"; - /* placeholder for external codec */ + remote-endpoint = <&rt5640_ep>; }; }; }; @@ -2017,6 +2018,30 @@ status = "okay"; }; + i2c@31e0000 { + status = "okay"; + + audio-codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>; + clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>; + clock-names = "mclk"; + realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>; + realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>; + realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>; + sound-name-prefix = "CVB-RT"; + + port { + rt5640_ep: endpoint { + remote-endpoint = <&i2s1_dap>; + mclk-fs = <256>; + }; + }; + }; + }; + pwm@32a0000 { assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; @@ -2073,11 +2098,21 @@ usb2-0 { mode = "host"; status = "okay"; + port { + hs_typec_p1: endpoint { + remote-endpoint = <&hs_ucsi_ccg_p1>; + }; + }; }; usb2-1 { mode = "host"; status = "okay"; + port { + hs_typec_p0: endpoint { + remote-endpoint = <&hs_ucsi_ccg_p0>; + }; + }; }; usb2-2 { @@ -2093,11 +2128,21 @@ usb3-0 { nvidia,usb2-companion = <1>; status = "okay"; + port { + ss_typec_p0: endpoint { + remote-endpoint = <&ss_ucsi_ccg_p0>; + }; + }; }; usb3-1 { nvidia,usb2-companion = <0>; status = "okay"; + port { + ss_typec_p1: endpoint { + remote-endpoint = <&ss_ucsi_ccg_p1>; + }; + }; }; usb3-2 { @@ -2190,6 +2235,64 @@ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", "p2u-5", "p2u-6", "p2u-7"; }; + + i2c@c240000 { + status = "okay"; + typec@8 { + compatible = "cypress,cypd4226"; + reg = <0x08>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>; + firmware-name = "nvidia,jetson-agx-xavier"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + ccg_typec_con0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "USB-C"; + data-role = "host"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hs_ucsi_ccg_p0: endpoint { + remote-endpoint = <&hs_typec_p0>; + }; + }; + port@1 { + reg = <1>; + ss_ucsi_ccg_p0: endpoint { + remote-endpoint = <&ss_typec_p0>; + }; + }; + }; + }; + ccg_typec_con1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "USB-C"; + data-role = "dual"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hs_ucsi_ccg_p1: endpoint { + remote-endpoint = <&hs_typec_p1>; + }; + }; + port@1 { + reg = <1>; + ss_ucsi_ccg_p1: endpoint { + remote-endpoint = <&ss_typec_p1>; + }; + }; + }; + }; + }; + }; }; gpio-keys { @@ -2293,5 +2396,23 @@ <&dmic3_port>; label = "NVIDIA Jetson AGX Orin APE"; + + widgets = "Microphone", "CVB-RT MIC Jack", + "Microphone", "CVB-RT MIC", + "Headphone", "CVB-RT HP Jack", + "Speaker", "CVB-RT SPK"; + + routing = /* I2S1 <-> RT5640 */ + "CVB-RT AIF1 Playback", "I2S1 DAP-Playback", + "I2S1 DAP-Capture", "CVB-RT AIF1 Capture", + /* RT5640 codec controls */ + "CVB-RT HP Jack", "CVB-RT HPOL", + "CVB-RT HP Jack", "CVB-RT HPOR", + "CVB-RT IN1P", "CVB-RT MIC Jack", + "CVB-RT IN2P", "CVB-RT MIC Jack", + "CVB-RT SPK", "CVB-RT SPOLP", + "CVB-RT SPK", "CVB-RT SPORP", + "CVB-RT DMIC1", "CVB-RT MIC", + "CVB-RT DMIC2", "CVB-RT MIC"; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi new file mode 100644 index 000000000000..baf4f69e410d --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra234-p3767.dtsi" + +/ { + compatible = "nvidia,p3767-0000", "nvidia,tegra234"; + model = "NVIDIA Jetson Orin NX"; + + bus@0 { + hda@3510000 { + nvidia,model = "NVIDIA Jetson Orin NX HDA"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi new file mode 100644 index 000000000000..bd60478fa75e --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra234.dtsi" + +/ { + compatible = "nvidia,p3767", "nvidia,tegra234"; + + bus@0 { + i2c@3160000 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + label = "module"; + vcc-supply = <&vdd_1v8_hs>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + spi@3270000 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <136000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; + + /* + * This only exists on Jetson Orin Nano Developer Kit (SKU 5) + * but UEFI needs this and will remove it on devices where it + * doesn't exist. + */ + mmc@3400000 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_HIGH>; + disable-wp; + }; + + hda@3510000 { + status = "okay"; + }; + + padctl@3520000 { + vclamp-usb-supply = <&vdd_1v8_ao>; + avdd-usb-supply = <&vdd_3v3_ao>; + }; + + rtc@c2a0000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + vdd_5v0_sys: regulator-vdd-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_1v8_hs: regulator-vdd-1v8-hs { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_ao: regulator-vdd-1v8-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_ao: regulator-vdd-3v3-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_AO"; + regulator-min-microvolt = <33000000>; + regulator-max-microvolt = <33000000>; + regulator-always-on; + vin-supply = <&vdd_5v0_sys>; + }; + + thermal-zones { + /* + * This monitoring is far from optimal, but it's good enough + * at this stage. + */ + cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <1000>; + status = "okay"; + + trips { + critical { + temperature = <104500>; + hysteresis = <0>; + type = "critical"; + }; + + hot { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; + + board_trip_passive: passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + board_trip_active2: active-2 { + temperature = <80000>; + hysteresis = <4000>; + type = "active"; + }; + + board_trip_active1: active-1 { + temperature = <65000>; + hysteresis = <4000>; + type = "active"; + }; + + board_trip_active0: active-0 { + temperature = <50000>; + hysteresis = <4000>; + type = "active"; + }; + }; + + cooling-maps { + passive { + cooling-device = <&fan 3 3>; + trip = <&board_trip_passive>; + }; + + active2 { + cooling-device = <&fan 2 3>; + trip = <&board_trip_active2>; + }; + + active1 { + cooling-device = <&fan 1 2>; + trip = <&board_trip_active1>; + }; + + active0 { + cooling-device = <&fan 0 1>; + trip = <&board_trip_active0>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts new file mode 100644 index 000000000000..7dfbc38eb3c4 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> + +#include "tegra234-p3767-0000.dtsi" +#include "tegra234-p3768-0000.dtsi" + +/ { + compatible = "nvidia,p3768-0000+p3767-0000", "nvidia,p3767-0000", "nvidia,tegra234"; + model = "NVIDIA Jetson Orin NX Engineering Reference Developer Kit"; + + aliases { + serial0 = &tcu; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + bus@0 { + serial@31d0000 { + current-speed = <115200>; + status = "okay"; + }; + + pwm@32a0000 { + assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + status = "okay"; + }; + + hda@3510000 { + nvidia,model = "NVIDIA Jetson Orin NX HDA"; + status = "okay"; + }; + + padctl@3520000 { + status = "okay"; + }; + + /* C1 - M.2 Key-E */ + pcie@14100000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_3>; + phy-names = "p2u-0"; + }; + + /* C4 - M.2 Key-M */ + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + /* C8 - Ethernet */ + pcie@140a0000 { + status = "okay"; + + num-lanes = <2>; + + phys = <&p2u_gbe_2>, <&p2u_gbe_3>; + phy-names = "p2u-0", "p2u-1"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + }; + + /* C7 - M.2 Key-M */ + pcie@141e0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_gbe_0>, <&p2u_gbe_1>; + phy-names = "p2u-0", "p2u-1"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <BTN_1>; + }; + + key-power { + label = "Power"; + gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-suspend { + label = "Suspend"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_SLEEP>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm3 0 45334>; + cooling-levels = <0 95 178 255>; + #cooling-cells = <2>; + }; + + vdd_3v3_pcie: regulator-vdd-3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_PCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + serial { + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi new file mode 100644 index 000000000000..aee21428e1a5 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + compatible = "nvidia,p3768-0000"; + + aliases { + serial0 = &tcu; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + bus@0 { + i2c@3160000 { + status = "okay"; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + label = "system"; + vcc-supply = <&vdd_1v8_sys>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + serial@31d0000 { + current-speed = <115200>; + status = "okay"; + }; + + pwm@32a0000 { + assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + status = "okay"; + }; + + padctl@3520000 { + status = "okay"; + + pads { + usb2 { + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + }; + + ports { + /* recovery port */ + usb2-0 { + mode = "otg"; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + usb-role-switch; + }; + + /* hub */ + usb2-1 { + mode = "host"; + vbus-supply = <&vdd_1v1_hub>; + status = "okay"; + }; + + /* M.2 Key-E */ + usb2-2 { + mode = "host"; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + + /* hub */ + usb3-0 { + nvidia,usb2-companion = <1>; + status = "okay"; + }; + + /* J5 */ + usb3-1 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + }; + }; + + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb3-1"; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", + "usb3-1"; + }; + + /* C1 - M.2 Key-E */ + pcie@14100000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_3>; + phy-names = "p2u-0"; + }; + + /* C4 - M.2 Key-M */ + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + /* C8 - Ethernet */ + pcie@140a0000 { + status = "okay"; + + num-lanes = <2>; + + phys = <&p2u_gbe_2>, <&p2u_gbe_3>; + phy-names = "p2u-0", "p2u-1"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + }; + + /* C7 - M.2 Key-M */ + pcie@141e0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_gbe_0>, <&p2u_gbe_1>; + phy-names = "p2u-0", "p2u-1"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <BTN_1>; + }; + + key-power { + label = "Power"; + gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-suspend { + label = "Suspend"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_SLEEP>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm3 0 45334>; + cooling-levels = <0 95 178 255>; + #cooling-cells = <2>; + }; + + vdd_1v8_sys: regulator-vdd-1v8-sys { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_SYS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v1_hub: regulator-vdd-1v1-hub { + compatible = "regulator-fixed"; + regulator-name = "VDD_AV10_HUB"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vdd_5v0_sys>; + regulator-always-on; + }; + + vdd_3v3_pcie: regulator-vdd-3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_PCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + serial { + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 8fe8eda7654d..5d354f8923b4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -20,7 +20,7 @@ #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>; + ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; misc@100000 { compatible = "nvidia,tegra234-misc"; @@ -676,9 +676,7 @@ reg = <0x0 0x03100000 0x0 0x10000>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_UARTA>; - clock-names = "serial"; resets = <&bpmp TEGRA234_RESET_UARTA>; - reset-names = "serial"; status = "disabled"; }; @@ -3402,6 +3400,24 @@ }; }; + dsu-pmu0 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&cpu0_0>, <&cpu0_1>, <&cpu0_2>, <&cpu0_3>; + }; + + dsu-pmu1 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&cpu1_0>, <&cpu1_1>, <&cpu1_2>, <&cpu1_3>; + }; + + dsu-pmu2 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&cpu2_0>, <&cpu2_1>, <&cpu2_2>, <&cpu2_3>; + }; + pmu { compatible = "arm,cortex-a78-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 31aa54f0428c..d42c59572ace 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -3,10 +3,13 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb @@ -28,6 +31,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb @@ -69,12 +73,15 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb @@ -83,9 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r0.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r1.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb @@ -100,10 +105,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb @@ -118,8 +119,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb @@ -177,6 +176,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb @@ -189,7 +189,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb -dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb @@ -200,3 +201,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index c52d79a55d80..59860a2223b8 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -325,12 +325,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&pronto { - status = "okay"; - - firmware-name = "qcom/apq8016/wcnss.mbn"; -}; - &sdhc_1 { status = "okay"; @@ -411,10 +405,19 @@ qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; +&wcnss { + status = "okay"; + firmware-name = "qcom/apq8016/wcnss.mbn"; +}; + &wcnss_ctrl { firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; }; +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + /* Enable CoreSight */ &cti0 { status = "okay"; }; &cti1 { status = "okay"; }; @@ -726,7 +729,6 @@ function = "gpio"; drive-strength = <8>; - input-enable; bias-pull-up; }; @@ -767,7 +769,6 @@ function = "gpio"; drive-strength = <8>; - input-enable; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index fe6c415e8229..b599909c4463 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -63,7 +63,6 @@ }; clocks { - compatible = "simple-bus"; divclk4: divclk4 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -146,7 +145,6 @@ &blsp1_spi1 { /* On Low speed expansion */ - label = "LS-SPI0"; status = "okay"; }; @@ -183,7 +181,6 @@ &blsp2_spi6 { /* On High speed expansion */ - label = "HS-SPI1"; status = "okay"; }; @@ -706,8 +703,7 @@ &pmi8994_spmi_regulators { vdd_s2-supply = <&vph_pwr>; - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-name = "VDD_GFX"; regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; @@ -974,6 +970,50 @@ }; }; +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "DB820c"; @@ -1026,7 +1066,7 @@ platform { sound-dai = <&q6routing>; - }; + }; codec { sound-dai = <&wcd9335 AIF4_PB>; @@ -1095,21 +1135,8 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - }; &venus { status = "okay"; }; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts new file mode 100644 index 000000000000..3af1d5556950 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 AP-MI01.2 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.2"; + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts new file mode 100644 index 000000000000..3b6a5cb8bf07 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP468 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6"; + compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + spi_0_data_clk_pins: spi-0-data-clk-state { + pins = "gpio14", "gpio15", "gpio16"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-down; + }; + + spi_0_cs_pins: spi-0-cs-state { + pins = "gpio17"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi new file mode 100644 index 000000000000..12e0e179e139 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -0,0 +1,387 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,apss-ipq.h> +#include <dt-bindings/clock/qcom,ipq5332-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq5332", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + clock-latency-ns = <200000>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_mem: tz@4a600000 { + reg = <0x0 0x4a600000 0x0 0x200000>; + no-map; + }; + + smem@4a800000 { + compatible = "qcom,smem"; + reg = <0x0 0x4a800000 0x0 0x00100000>; + no-map; + + hwlocks = <&tcsr_mutex 0>; + }; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + rng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5332-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 53>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_0_pins: serial0-state { + pins = "gpio18", "gpio19"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq5332-gcc"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq5332", "syscon"; + reg = <0x01937000 0x21000>; + }; + + sdhc: mmc@7804000 { + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1d000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00000000 0xffd>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq5332", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + timeout-sec = <30>; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5332-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo_board>; + clock-names = "pll", "xo"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq5332-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index 2aee8594b280..f5f4827c0e17 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -35,7 +35,6 @@ }; &blsp1_spi1 { - cs-select = <0>; pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index bbd94025ff5d..9ff4e9d45065 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -738,8 +738,8 @@ phys = <&pcie_phy0>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>, - <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>; + ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>, + <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index ca3f96646b90..5cf07caf4103 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -62,11 +62,11 @@ perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; -&pcie_phy0 { +&pcie_qmp0 { status = "okay"; }; -&pcie_phy1 { +&pcie_qmp1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi index 651a231554e0..1b8379ba87f9 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -48,11 +48,11 @@ perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; }; -&pcie_phy0 { +&pcie_qmp0 { status = "okay"; }; -&pcie_phy1 { +&pcie_qmp1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 62d05d740646..84e715aa4310 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -397,7 +397,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sdhc_1: mmc@7824900 { @@ -687,7 +686,8 @@ }; apcs_glb: mailbox@b111000 { - compatible = "qcom,ipq8074-apcs-apps-global"; + compatible = "qcom,ipq8074-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; clocks = <&a53pll>, <&xo>; clock-names = "pll", "xo"; @@ -780,10 +780,8 @@ phys = <&pcie_phy1>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x10200000 0x10200000 - 0 0x10000>, /* downstream I/O */ - <0x82000000 0 0x10220000 0x10220000 - 0 0xfde0000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -844,10 +842,8 @@ phys = <&pcie_phy0>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x20200000 0x20200000 - 0 0x10000>, /* downstream I/O */ - <0x82000000 0 0x20220000 0x20220000 - 0 0xfde0000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file mode 100644 index 000000000000..2c8430197ec0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi new file mode 100644 index 000000000000..3bb7435f5e7f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { + compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: tz@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq9574-gcc"; + reg = <0x01800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <0>, + <0>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + sdhc_1: mmc@7804000 { + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board_clk>; + clock-names = "iface", "core", "xo"; + non-removable; + status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00000000 0xffd>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index ed3fa7b3575b..13cd9ad167df 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -118,10 +118,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; @@ -149,6 +145,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 701a5585d77e..fecb69944cfa 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -160,10 +160,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -191,6 +187,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index 3618704a5330..91284a1d0966 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -128,10 +128,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -159,6 +155,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index a0e520edde02..525ec76efeeb 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -118,10 +118,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; @@ -149,6 +145,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 8c07eca900d3..5b1bac8f5122 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -227,10 +227,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -312,6 +308,14 @@ qcom,hphl-jack-type-normally-open; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index d1e8cf2f50c0..f1dd625e1822 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -231,10 +231,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -263,6 +259,14 @@ extcon = <&pm8916_usbin>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 3899e11b9843..b79e80913af9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -99,10 +99,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -130,6 +126,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi index 8cac23b5240c..6eb5e0a39510 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -20,17 +20,6 @@ pll-supply = <&pm8916_l7>; }; -&pronto { - vddpx-supply = <&pm8916_l7>; - - iris { - vddxo-supply = <&pm8916_l7>; - vddrfa-supply = <&pm8916_s3>; - vddpa-supply = <&pm8916_l9>; - vdddig-supply = <&pm8916_l5>; - }; -}; - &sdhc_1 { vmmc-supply = <&pm8916_l8>; vqmmc-supply = <&pm8916_l5>; @@ -46,6 +35,17 @@ v3p3-supply = <&pm8916_l13>; }; +&wcnss { + vddpx-supply = <&pm8916_l7>; +}; + +&wcnss_iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; +}; + &rpm_requests { smd_rpm_regulators: regulators { compatible = "qcom,rpm-pm8916-regulators"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index a2ed7bdbf528..16d67749960e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -252,10 +252,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index c691cca2eb45..a1ca4d883420 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -112,6 +112,14 @@ status = "okay"; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &msmgpio { panel_vdd3_default: panel-vdd3-default-state { pins = "gpio9"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 3dd819458785..4e10b8a5e9f9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -54,12 +54,6 @@ status = "okay"; }; -&pronto { - iris { - compatible = "qcom,wcn3660b"; - }; -}; - &touchkey { vcc-supply = <®_touch_key>; vdd-supply = <®_touch_key>; @@ -69,6 +63,14 @@ status = "okay"; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + &msmgpio { tkey_en_default: tkey-en-default-state { pins = "gpio97"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index c95f0b4bc61f..f6c4a011fdfd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -58,6 +58,14 @@ vdd-supply = <®_touch_key>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &msmgpio { tkey_en_default: tkey-en-default-state { pins = "gpio97"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index d920b7247d82..74ffd04db8d8 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -125,14 +125,6 @@ status = "okay"; }; -&pronto { - status = "okay"; - - iris { - compatible = "qcom,wcn3660b"; - }; -}; - &sdhc_1 { pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; @@ -162,6 +154,14 @@ extcon = <&pm8916_usbin>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi index f3b81b6f0a2f..adeee0830e76 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -93,10 +93,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -124,6 +120,14 @@ extcon = <&muic>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index d4984b3af802..1a41a4db874d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -272,14 +272,6 @@ status = "okay"; }; -&pronto { - status = "okay"; - - iris { - compatible = "qcom,wcn3660b"; - }; -}; - &sdhc_1 { status = "okay"; @@ -320,6 +312,14 @@ extcon = <&muic>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts index c492db856190..82e260375174 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts @@ -33,7 +33,3 @@ &gpio_leds_default { pins = "gpio81", "gpio82", "gpio83"; }; - -&sim_ctrl_default { - pins = "gpio1", "gpio2"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts index 700cf81cbf8c..978f0abcdf8f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -25,6 +25,11 @@ gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; }; +&mpss { + pinctrl-0 = <&sim_ctrl_default>; + pinctrl-names = "default"; +}; + &button_default { pins = "gpio37"; bias-pull-down; @@ -34,6 +39,28 @@ pins = "gpio20", "gpio21", "gpio22"; }; -&sim_ctrl_default { - pins = "gpio1", "gpio2"; +/* This selects the external SIM card slot by default */ +&msmgpio { + sim_ctrl_default: sim-ctrl-default-state { + esim-sel-pins { + pins = "gpio0", "gpio3"; + function = "gpio"; + bias-disable; + output-low; + }; + + sim-en-pins { + pins = "gpio1"; + function = "gpio"; + bias-disable; + output-low; + }; + + sim-sel-pins { + pins = "gpio2"; + function = "gpio"; + bias-disable; + output-high; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi index 790a9696da9d..50bae6f214f1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -92,9 +92,6 @@ }; &mpss { - pinctrl-0 = <&sim_ctrl_default>; - pinctrl-names = "default"; - status = "okay"; }; @@ -102,10 +99,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; @@ -125,6 +118,14 @@ extcon = <&pm8916_usbin>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -240,11 +241,4 @@ drive-strength = <2>; bias-disable; }; - - sim_ctrl_default: sim-ctrl-default-state { - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-low; - }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index a87be1d95b14..ac56c7595f78 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -153,10 +153,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -184,6 +180,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts new file mode 100644 index 000000000000..74ce6563be18 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-ufi.dtsi" + +/ { + model = "uz801 v3.0 4G Modem Stick"; + compatible = "yiming,uz801-v3", "qcom,msm8916"; +}; + +&button_restart { + gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>; +}; + +&led_r { + gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>; +}; + +&led_g { + gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; +}; + +&led_b { + gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>; +}; + +&button_default { + pins = "gpio23"; + bias-pull-up; +}; + +&gpio_leds_default { + pins = "gpio6", "gpio7", "gpio8"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 0733c2f4f379..7e0fa37a3adf 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -503,7 +503,7 @@ bits = <1 7>; }; - tsens_mode: mode@ec { + tsens_mode: mode@ef { reg = <0xef 0x1>; bits = <5 3>; }; @@ -1870,7 +1870,7 @@ }; }; - pronto: remoteproc@a21b000 { + wcnss: remoteproc@a21b000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; @@ -1896,9 +1896,8 @@ status = "disabled"; - iris { - compatible = "qcom,wcn3620"; - + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ clocks = <&rpmcc RPM_SMD_RF_CLK2>; clock-names = "xo"; }; @@ -1916,13 +1915,13 @@ compatible = "qcom,wcnss"; qcom,smd-channels = "WCNSS_CTRL"; - qcom,mmio = <&pronto>; + qcom,mmio = <&wcnss>; - bluetooth { + wcnss_bt: bluetooth { compatible = "qcom,wcnss-bt"; }; - wifi { + wcnss_wifi: wifi { compatible = "qcom,wcnss-wlan"; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, @@ -2180,7 +2179,6 @@ }; }; }; - }; timer { diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 610f3e3fc0c2..602cb188a635 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -2,9 +2,13 @@ /* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ #include <dt-bindings/clock/qcom,gcc-msm8953.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/thermal/thermal.h> / { @@ -269,7 +273,7 @@ compatible = "qcom,rpm-msm8953"; qcom,smd-channels = "rpm_requests"; - rpmcc: rpmcc { + rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; clocks = <&xo_board>; clock-names = "xo"; @@ -281,9 +285,6 @@ #power-domain-cells = <1>; operating-points-v2 = <&rpmpd_opp_table>; - clocks = <&xo_board>; - clock-names = "ref"; - rpmpd_opp_table: opp-table { compatible = "operating-points-v2"; @@ -328,6 +329,80 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + smp2p_wcnss_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + smp2p_wcnss_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smsm { compatible = "qcom,smsm"; @@ -342,6 +417,22 @@ #qcom,smem-state-cells = <1>; }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; }; soc: soc@0 { @@ -352,12 +443,12 @@ rpm_msg_ram: sram@60000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x60000 0x8000>; + reg = <0x00060000 0x8000>; }; hsusb_phy: phy@79000 { compatible = "qcom,msm8953-qusb2-phy"; - reg = <0x79000 0x180>; + reg = <0x00079000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, @@ -380,8 +471,8 @@ tsens0: thermal-sensor@4a9000 { compatible = "qcom,msm8953-tsens", "qcom,tsens-v2"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ #qcom,sensors = <16>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; @@ -391,12 +482,12 @@ restart@4ab000 { compatible = "qcom,pshold"; - reg = <0x4ab000 0x4>; + reg = <0x004ab000 0x4>; }; tlmm: pinctrl@1000000 { compatible = "qcom,msm8953-pinctrl"; - reg = <0x1000000 0x300000>; + reg = <0x01000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&tlmm 0 0 142>; @@ -632,20 +723,51 @@ drive-strength = <2>; bias-disable; }; + + wcnss_pin_a: wcnss-active-state { + + wcss-wlan2-pins { + pins = "gpio76"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan1-pins { + pins = "gpio77"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan0-pins { + pins = "gpio78"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan-pins { + pins = "gpio79", "gpio80"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; }; gcc: clock-controller@1800000 { compatible = "qcom,gcc-msm8953"; - reg = <0x1800000 0x80000>; + reg = <0x01800000 0x80000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - clocks = <&xo_board>, + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>, - <0>, - <0>, - <0>, - <0>; + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <&dsi1_phy 1>, + <&dsi1_phy 0>; clock-names = "xo", "sleep", "dsi0pll", @@ -656,25 +778,25 @@ tcsr_mutex: hwlock@1905000 { compatible = "qcom,tcsr-mutex"; - reg = <0x1905000 0x20000>; + reg = <0x01905000 0x20000>; #hwlock-cells = <1>; }; tcsr: syscon@1937000 { compatible = "qcom,tcsr-msm8953", "syscon"; - reg = <0x1937000 0x30000>; + reg = <0x01937000 0x30000>; }; tcsr_phy_clk_scheme_sel: syscon@193f044 { compatible = "qcom,tcsr-msm8953", "syscon"; - reg = <0x193f044 0x4>; + reg = <0x0193f044 0x4>; }; mdss: display-subsystem@1a00000 { compatible = "qcom,mdss"; - reg = <0x1a00000 0x1000>, - <0x1ab0000 0x1040>; + reg = <0x01a00000 0x1000>, + <0x01ab0000 0x1040>; reg-names = "mdss_phys", "vbif_phys"; @@ -701,7 +823,7 @@ mdp: display-controller@1a01000 { compatible = "qcom,msm8953-mdp5", "qcom,mdp5"; - reg = <0x1a01000 0x89000>; + reg = <0x01a01000 0x89000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; @@ -742,7 +864,7 @@ dsi0: dsi@1a94000 { compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; - reg = <0x1a94000 0x400>; + reg = <0x01a94000 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; @@ -794,9 +916,9 @@ dsi0_phy: phy@1a94400 { compatible = "qcom,dsi-phy-14nm-8953"; - reg = <0x1a94400 0x100>, - <0x1a94500 0x300>, - <0x1a94800 0x188>; + reg = <0x01a94400 0x100>, + <0x01a94500 0x300>, + <0x01a94800 0x188>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; @@ -804,7 +926,7 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>; + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; status = "disabled"; @@ -812,7 +934,7 @@ dsi1: dsi@1a96000 { compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; - reg = <0x1a96000 0x400>; + reg = <0x01a96000 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; @@ -861,9 +983,9 @@ dsi1_phy: phy@1a96400 { compatible = "qcom,dsi-phy-14nm-8953"; - reg = <0x1a96400 0x100>, - <0x1a96500 0x300>, - <0x1a96800 0x188>; + reg = <0x01a96400 0x100>, + <0x01a96500 0x300>, + <0x01a96800 0x188>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; @@ -871,7 +993,7 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>; + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; status = "disabled"; @@ -880,7 +1002,7 @@ apps_iommu: iommu@1e00000 { compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; - ranges = <0 0x1e20000 0x20000>; + ranges = <0 0x01e20000 0x20000>; clocks = <&gcc GCC_SMMU_CFG_CLK>, <&gcc GCC_APSS_TCU_ASYNC_CLK>; @@ -916,11 +1038,11 @@ spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x200f000 0x1000>, - <0x2400000 0x800000>, - <0x2c00000 0x800000>, - <0x3800000 0x200000>, - <0x200a000 0x2100>; + reg = <0x0200f000 0x1000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x2100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; @@ -933,9 +1055,63 @@ #size-cells = <0>; }; + mpss: remoteproc@4080000 { + compatible = "qcom,msm8953-mss-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8953_VDDCX>, + <&rpmpd MSM8953_VDDMX>, + <&rpmpd MSM8953_VDDMD>; + power-domain-names = "cx", "mx","mss"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "bus", "mem", "xo"; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_BCR>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + + label = "modem"; + }; + }; + usb3: usb@70f8800 { compatible = "qcom,msm8953-dwc3", "qcom,dwc3"; - reg = <0x70f8800 0x400>; + reg = <0x070f8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -979,14 +1155,13 @@ snps,hird-threshold = /bits/ 8 <0x00>; maximum-speed = "high-speed"; - phy_mode = "utmi"; }; }; sdhc_1: mmc@7824900 { compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg = <0x07824900 0x500>, <0x07824000 0x800>; reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, @@ -995,7 +1170,7 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; power-domains = <&rpmpd MSM8953_VDDCX>; @@ -1046,7 +1221,7 @@ sdhc_2: mmc@7864900 { compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; - reg = <0x7864900 0x500>, <0x7864000 0x800>; + reg = <0x07864900 0x500>, <0x07864000 0x800>; reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, @@ -1055,7 +1230,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; power-domains = <&rpmpd MSM8953_VDDCX>; @@ -1101,7 +1276,7 @@ uart_0: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; + reg = <0x078af000 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -1112,7 +1287,7 @@ i2c_1: i2c@78b5000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b5000 0x600>; + reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, @@ -1130,7 +1305,7 @@ i2c_2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b6000 0x600>; + reg = <0x078b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, @@ -1148,7 +1323,7 @@ i2c_3: i2c@78b7000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b7000 0x600>; + reg = <0x078b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, @@ -1165,7 +1340,7 @@ i2c_4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b8000 0x600>; + reg = <0x078b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, @@ -1182,7 +1357,7 @@ i2c_5: i2c@7af5000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af5000 0x600>; + reg = <0x07af5000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, @@ -1199,7 +1374,7 @@ i2c_6: i2c@7af6000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af6000 0x600>; + reg = <0x07af6000 0x600>; interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, @@ -1216,7 +1391,7 @@ i2c_7: i2c@7af7000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af7000 0x600>; + reg = <0x07af7000 0x600>; interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, @@ -1233,7 +1408,7 @@ i2c_8: i2c@7af8000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af8000 0x600>; + reg = <0x07af8000 0x600>; interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, @@ -1248,6 +1423,72 @@ status = "disabled"; }; + wcnss: remoteproc@a21b000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_fw_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8953_VDDCX>, + <&rpmpd MSM8953_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&smp2p_wcnss_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -1257,13 +1498,13 @@ apcs: mailbox@b011000 { compatible = "qcom,msm8953-apcs-kpss-global", "syscon"; - reg = <0xb011000 0x1000>; + reg = <0x0b011000 0x1000>; #mbox-cells = <1>; }; timer@b120000 { compatible = "arm,armv7-timer-mem"; - reg = <0xb120000 0x1000>; + reg = <0x0b120000 0x1000>; #address-cells = <0x01>; #size-cells = <0x01>; ranges; @@ -1272,52 +1513,166 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb121000 0x1000>, - <0xb122000 0x1000>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; }; frame@b123000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb123000 0x1000>; + reg = <0x0b123000 0x1000>; status = "disabled"; }; frame@b124000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb124000 0x1000>; + reg = <0x0b124000 0x1000>; status = "disabled"; }; frame@b125000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb125000 0x1000>; + reg = <0x0b125000 0x1000>; status = "disabled"; }; frame@b126000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb126000 0x1000>; + reg = <0x0b126000 0x1000>; status = "disabled"; }; frame@b127000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb127000 0x1000>; + reg = <0x0b127000 0x1000>; status = "disabled"; }; frame@b128000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb128000 0x1000>; + reg = <0x0b128000 0x1000>; status = "disabled"; }; }; + + lpass: remoteproc@c200000 { + compatible = "qcom,msm8953-adsp-pil"; + reg = <0x0c200000 0x100>; + + interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + power-domain-names = "cx"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + label = "lpass"; + mboxes = <&apcs 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <0 1>; + }; + dai@20 { + reg = <TERTIARY_MI2S_TX>; + qcom,sd-lines = <0 1>; + }; + dai@127 { + reg = <QUINARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@0 { + reg = <0>; + direction = <Q6ASM_DAI_RX>; + }; + dai@1 { + reg = <1>; + direction = <Q6ASM_DAI_TX>; + }; + dai@2 { + reg = <2>; + direction = <Q6ASM_DAI_RX>; + }; + dai@3 { + reg = <3>; + direction = <Q6ASM_DAI_RX>; + is-compress-dai; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi index 67baced639c9..085d79542e1b 100644 --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi @@ -280,3 +280,7 @@ vdda3p3-supply = <&pm8950_l13>; status = "okay"; }; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index 2d360d05aa5e..1f0bd24a074a 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -20,6 +20,13 @@ chosen { }; + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -351,6 +358,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; #clock-cells = <1>; }; @@ -809,7 +818,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sdhc_1: mmc@7824000 { @@ -1027,7 +1035,8 @@ }; apcs: mailbox@b011000 { - compatible = "qcom,msm8976-apcs-kpss-global", "syscon"; + compatible = "qcom,msm8976-apcs-kpss-global", + "qcom,msm8994-apcs-kpss-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi index cd77dcb55872..b8f2a01bcb96 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi @@ -60,11 +60,6 @@ reg = <0x0 0x05000000 0x0 0x1a00000>; no-map; }; - - reserved@6c00000 { - reg = <0x0 0x06c00000 0x0 0x400000>; - no-map; - }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts index 7b0f62144c3e..29e79ae0849d 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts @@ -2,7 +2,7 @@ /* * Copyright (c) 2015, Huawei Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2021-2023, Petr Vorel <petr.vorel@gmail.com> */ /dts-v1/; @@ -31,13 +31,18 @@ #size-cells = <2>; ranges; + cont_splash_mem: memory@3401000 { + reg = <0 0x03401000 0 0x1000000>; + no-map; + }; + tzapp_mem: tzapp@4800000 { reg = <0 0x04800000 0 0x1900000>; no-map; }; - removed_region: reserved@6300000 { - reg = <0 0x06300000 0 0xD00000>; + reserved@6300000 { + reg = <0 0x06300000 0 0x700000>; no-map; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 4520a7e86d5b..2861bcdf87b7 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -46,8 +46,6 @@ }; clocks { - compatible = "simple-bus"; - divclk4: divclk4 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -542,8 +540,7 @@ }; &pmi8994_spmi_regulators { - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index 3ceb86b06209..9dbde79f26a2 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -173,8 +173,7 @@ * power domain.. which still isn't enough and forces us to bind * OXILI_CX and OXILI_GX together! */ - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-name = "VDD_GFX"; regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; @@ -482,7 +481,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; ts_reset_active: ts-reset-active-state { diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 9ff9d35496d2..2831966be960 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -228,6 +228,11 @@ reg = <0 0xc9400000 0 0x3f00000>; no-map; }; + + reserved@6c00000 { + reg = <0 0x06c00000 0 0x400000>; + no-map; + }; }; smd { @@ -242,7 +247,7 @@ compatible = "qcom,rpm-msm8994"; qcom,smd-channels = "rpm_requests"; - rpmcc: rpmcc { + rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -840,7 +845,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; i2c5_default: i2c5-default-state { diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi index 2994337c6046..2adadc1e5b7c 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -85,10 +85,6 @@ }; }; -&adsp_pil { - status = "okay"; -}; - &blsp1_i2c3 { status = "okay"; @@ -183,10 +179,6 @@ status = "okay"; }; -&gpu { - status = "okay"; -}; - &hsusb_phy1 { vdd-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; @@ -215,7 +207,6 @@ &mss_pil { pll-supply = <&vreg_l12a_1p8>; - status = "okay"; }; &pcie0 { @@ -504,8 +495,48 @@ }; }; -&slpi_pil { +&slim_msm { status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; }; &sound { @@ -768,19 +799,3 @@ maximum-speed = "high-speed"; }; - -&venus { - status = "okay"; -}; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts index 1bdc1b134305..dfe75119b8d2 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts @@ -17,6 +17,7 @@ &adsp_pil { firmware-name = "qcom/msm8996/oneplus3/adsp.mbn"; + status = "okay"; }; &battery { @@ -25,6 +26,8 @@ }; &gpu { + status = "okay"; + zap-shader { firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; }; @@ -33,12 +36,15 @@ &mss_pil { firmware-name = "qcom/msm8996/oneplus3/mba.mbn", "qcom/msm8996/oneplus3/modem.mbn"; + status = "okay"; }; &slpi_pil { firmware-name = "qcom/msm8996/oneplus3/slpi.mbn"; + status = "okay"; }; &venus { firmware-name = "qcom/msm8996/oneplus3/venus.mbn"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts index 34f837dd0c12..51fce65e89f1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts @@ -18,6 +18,7 @@ &adsp_pil { firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn"; + status = "okay"; }; &battery { @@ -26,6 +27,8 @@ }; &gpu { + status = "okay"; + zap-shader { firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; }; @@ -34,12 +37,15 @@ &mss_pil { firmware-name = "qcom/msm8996/oneplus3t/mba.mbn", "qcom/msm8996/oneplus3t/modem.mbn"; + status = "okay"; }; &slpi_pil { firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn"; + status = "okay"; }; &venus { firmware-name = "qcom/msm8996/oneplus3t/venus.mbn"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 2acfed28e3cb..1ce5df0a3405 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -12,8 +12,6 @@ / { clocks { - compatible = "simple-bus"; - divclk1_cdc: divclk1 { compatible = "gpio-gate-clock"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>; @@ -337,6 +335,52 @@ }; }; +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&divclk1_cdc>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-vbat-supply = <&vph_pwr>; + vdd-micbias-supply = <&vph_pwr_bbyp>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + &slpi_pil { status = "okay"; @@ -395,20 +439,6 @@ status = "okay"; }; -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&divclk1_cdc>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-vbat-supply = <&vph_pwr>; - vdd-micbias-supply = <&vph_pwr_bbyp>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; - &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 905678e7175d..2b35cb3f5292 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1552,7 +1552,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; blsp2_i2c1_default: blsp2-i2c1-state { @@ -1851,8 +1850,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, - <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>, + <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; device_type = "pci"; @@ -1882,7 +1881,6 @@ "cfg", "bus_master", "bus_slave"; - }; pcie1: pcie@608000 { @@ -1905,8 +1903,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, - <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>, + <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; device_type = "pci"; @@ -1956,8 +1954,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, - <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>, + <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; device_type = "pci"; @@ -3006,8 +3004,11 @@ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy1>, <&ssusb_phy_0>; phy-names = "usb2-phy", "usb3-phy"; + snps,hird-threshold = /bits/ 8 <0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,is-utmi-l1-suspend; + tx-fifo-resize; }; }; @@ -3383,36 +3384,8 @@ dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; - slim@1 { - reg = <1>; - #address-cells = <2>; - #size-cells = <0>; - - tasha_ifd: tas-ifd@0,0 { - compatible = "slim217,1a0"; - reg = <0 0>; - }; - - wcd9335: codec@1,0 { - pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; - pinctrl-names = "default"; - - compatible = "slim217,1a0"; - reg = <1 0>; - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "intr1", "intr2"; - interrupt-controller; - #interrupt-cells = <1>; - reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; - - slim-ifc-dev = <&tasha_ifd>; - - #sound-dai-cells = <1>; - }; - }; + status = "disabled"; }; adsp_pil: remoteproc@9300000 { @@ -3496,7 +3469,6 @@ }; }; }; - }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 5aad9f05780a..b35e2d9f428c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -44,7 +44,7 @@ label = "Keyboard Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; debounce-interval = <15>; - gpio-key,wakeup; + wakeup-source; linux,input-type = <EV_SW>; linux,code = <SW_KEYPAD_SLIDE>; }; @@ -116,7 +116,7 @@ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEUP>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; @@ -640,7 +640,6 @@ function = "gpio"; bias-disable; drive-strength = <2>; - input-enable; }; ts_int_n: ts-int-n-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index d36b36af49d0..fac8b3510cd3 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -34,7 +34,7 @@ &pmi8998_gpios { button_backlight_default: button-backlight-state { pins = "gpio5"; - function = "gpio"; + function = "normal"; bias-pull-down; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index ce03c7c239e5..062d56c42385 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -501,7 +501,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; ts_int_active: ts-int-active-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts index 1868ad649415..055b6a643d82 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -22,7 +22,7 @@ enable-active-high; gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&disp_dvdd_en>; + pinctrl-0 = <&four_k_disp_dcdc_en>; }; }; @@ -37,8 +37,30 @@ qcom,soft-start-us = <200>; }; +&pm8005_gpios { + gpio-line-names = "EAR_EN", /* GPIO_1 */ + "NC", + "SLB", + "OPTION_1_PM8005"; +}; + &pmi8998_gpios { - disp_dvdd_en: disp-dvdd-en-active-state { + gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */ + "NC", + "NC", + "TYPEC_UUSB_SEL", + "VIB_LDO_EN", + "NC", + "DISPLAY_TYPE_SEL", + "USB_SWITCH_SEL", + "NC", + "4K_DISP_DCDC_EN", /* GPIO_10 */ + "NC", + "DIV_CLK3", + "SPMI_I2C_SEL", + "NC"; + + four_k_disp_dcdc_en: 4k-disp-dcdc-en-state { pins = "gpio10"; function = "normal"; bias-disable; @@ -49,6 +71,159 @@ }; }; +&tlmm { + gpio-line-names = "", /* GPIO_0 */ + "", + "", + "", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "MAIN_CAM_PWR_EN", + "TOF_INT_N", + "NC", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "TOF_RESET_N", + "CAM2_RSTN", + "NC", + "CAM1_RSTN", /* GPIO_30 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "CC_DIR", + "UIM2_DETECT_EN", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "NC", + "NC", /* GPIO_50 */ + "NC", + "NC", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "NC", + "TRAY2_DET_DS", + "CODEC_RST_N", + "WSA_L_EN", + "WSA_R_EN", + "NC", + "NC", + "NC", + "LPASS_SLIMBUS_CLK", /* GPIO_70 */ + "LPASS_SLIMBUS_DATA0", + "LPASS_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "NC", + "NC", /* GPIO_80 */ + "SW_SERVICE", + "TX_GTR_THRES_IN", + "HW_ID0", + "HW_ID1", + "NC", + "NC", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_RESET_N", + "NC", /* GPIO_90 */ + "NC", + "NFC_IRQ", + "NFC_DWLD_EN", + "DISP_RESET_N", + "TRAY2_DET", + "CAM_SOF", + "RFFE6_CLK", + "RFFE6_DATA", + "DEBUG_GPIO0", + "DEBUG_GPIO1", /* GPIO_100 */ + "GRFC4", + "NC", + "NC", + "RSVD", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RST", + "UIM1_PRESENT", + "UIM_BATT_ALARM", + "RSVD", + "NC", + "NC", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT_N", + "NC", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "NC", + "NC", + "USB_DETECT_EN", + "NC", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "NC", + "TS_VDDIO_EN", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "NC", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; +}; + &vreg_l22a_2p85 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 820414758888..687e96068cb2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -21,7 +21,7 @@ clocks { div1_mclk: divclk1 { compatible = "gpio-gate-clock"; - pinctrl-0 = <&audio_mclk_pin>; + pinctrl-0 = <&div_clk1>; pinctrl-names = "default"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>; #clock-cells = <0>; @@ -46,7 +46,7 @@ enable-active-high; gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cam0_vdig_default>; + pinctrl-0 = <&main_cam_pwr_en>; }; cam1_vdig_vreg: cam1-vdig { @@ -56,7 +56,7 @@ enable-active-high; gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cam1_vdig_default>; + pinctrl-0 = <&chat_cam_pwr_en>; vin-supply = <&vreg_s3a_1p35>; }; @@ -67,7 +67,7 @@ enable-active-high; gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cam_vio_default>; + pinctrl-0 = <&main_cam_pwr_io_en>; vin-supply = <&vreg_lvs1a_1p8>; }; @@ -92,21 +92,20 @@ id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&usb_extcon_active &usb_vbus_active>; + pinctrl-0 = <&cc_dir_default &usb_detect_en>; }; gpio-keys { compatible = "gpio-keys"; label = "Side buttons"; pinctrl-names = "default"; - pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, - <&cam_snapshot_pin_a>; + pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>; button-vol-down { label = "Volume Down"; gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEDOWN>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; @@ -131,14 +130,14 @@ compatible = "gpio-keys"; label = "Hall sensors"; pinctrl-names = "default"; - pinctrl-0 = <&hall_sensor0_default>; + pinctrl-0 = <&acc_cover_open>; event-hall-sensor0 { label = "Cover Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <30>; }; }; @@ -189,7 +188,7 @@ compatible = "gpio-vibrator"; enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vib_default>; + pinctrl-0 = <&vib_ldo_en>; }; }; @@ -263,7 +262,7 @@ vdd-supply = <&cam_vio_vreg>; pinctrl-names = "default"; - pinctrl-0 = <&tof_int &tof_reset>; + pinctrl-0 = <&tof_int_n &tof_reset>; }; }; @@ -292,6 +291,13 @@ regulator-soft-start; }; +&pm8005_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "SLB", + "OPTION_1_PM8005"; +}; + &pm8005_regulators { /* VDD_GFX supply */ pm8005_s1: s1 { @@ -304,7 +310,34 @@ }; &pm8998_gpios { - vol_down_pin_a: vol-down-active-state { + gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */ + "NC", + "WLAN_SW_CTRL (DISALLOWED)", + "SSC_PWR_EN", + "VOL_DOWN_N", + "VOL_UP_N", + "SNAPSHOT_N", + "FOCUS_N", + "FLASH_THERM", + "", /* GPIO_10 */ + "", + "", + "DIV_CLK1", + "NC", + "NC (DISALLOWED)", + "DIV_CLK3", + "NC", + "NC", + "NC", + "NC (DISALLOWED)", /* GPIO_20 */ + "NFC_CLK_REQ", + "NC (DISALLOWED)", + "WCSS_PWR_REQ", + "OPTION_1 (DISALLOWED)", + "OPTION_2 (DISALLOWED)", + "PM_SLB (DISALLOWED)"; + + vol_down_n: vol-down-n-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -312,7 +345,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_focus_pin_a: cam-focus-btn-active-state { + focus_n: focus-n-state { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -320,7 +353,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_snapshot_pin_a: cam-snapshot-btn-active-state { + snapshot_n: snapshot-n-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -328,7 +361,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - audio_mclk_pin: audio-mclk-pin-active-state { + div_clk1: div-clk1-state { pins = "gpio13"; function = "func2"; power-source = <0>; @@ -336,7 +369,22 @@ }; &pmi8998_gpios { - cam_vio_default: cam-vio-active-state { + gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */ + "NC", + "NC", + "TYPEC_UUSB_SEL", + "VIB_LDO_EN", + "NC", + "DISPLAY_TYPE_SEL", + "NC", + "NC", + "NC", /* GPIO_10 */ + "NC", + "DIV_CLK3", + "SPMI_I2C_SEL", + "NC"; + + main_cam_pwr_io_en: main-cam-pwr-io-en-state { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -346,7 +394,7 @@ power-source = <1>; }; - vib_default: vib-en-state { + vib_ldo_en: vib-ldo-en-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -590,8 +638,158 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - - mdp_vsync_n: mdp-vsync-n-state { + gpio-line-names = "", /* GPIO_0 */ + "", + "", + "", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "MAIN_CAM_PWR_EN", + "TOF_INT_N", + "NC", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "TOF_RESET_N", + "CAM2_RSTN", + "NC", + "CAM1_RSTN", /* GPIO_30 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "CC_DIR", + "UIM2_DETECT_EN", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "NC", + "NC", /* GPIO_50 */ + "NC", + "NC", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "NC", + "TRAY2_DET_DS", + "CODEC_RST_N", + "WSA_L_EN", + "WSA_R_EN", + "NC", + "NC", + "NC", + "LPASS_SLIMBUS_CLK", /* GPIO_70 */ + "LPASS_SLIMBUS_DATA0", + "LPASS_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "NC", + "NC", /* GPIO_80 */ + "SW_SERVICE", + "TX_GTR_THRES_IN", + "HW_ID0", + "HW_ID1", + "NC", + "NC", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_RESET_N", + "NC", /* GPIO_90 */ + "NC", + "NFC_IRQ", + "NFC_DWLD_EN", + "DISP_RESET_N", + "TRAY2_DET", + "CAM_SOF", + "RFFE6_CLK", + "RFFE6_DATA", + "DEBUG_GPIO0", + "DEBUG_GPIO1", /* GPIO_100 */ + "GRFC4", + "NC", + "NC", + "RSVD", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RST", + "UIM1_PRESENT", + "UIM_BATT_ALARM", + "RSVD", + "NC", + "NC", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT_N", + "NC", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "NC", + "NC", + "USB_DETECT_EN", + "NC", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "NC", + "NC", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "NC", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; + + mdp_vsync_p: mdp-vsync-p-state { pins = "gpio10"; function = "mdp_vsync_a"; drive-strength = <2>; @@ -606,14 +804,14 @@ output-low; }; - msm_mclk0_default: msm-mclk0-active-state { + cam_mclk0_active: cam-mclk0-active-state { pins = "gpio13"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; - msm_mclk1_default: msm-mclk1-active-state { + cam_mclk1_active: cam-mclk1-active-state { pins = "gpio14"; function = "cam_mclk"; drive-strength = <2>; @@ -634,48 +832,46 @@ drive-strength = <2>; }; - cam0_vdig_default: cam0-vdig-default-state { + main_cam_pwr_en: main-cam-pwr-en-default-state { pins = "gpio21"; function = "gpio"; bias-disable; drive-strength = <2>; }; - tof_int: tof-int-state { + tof_int_n: tof-int-n-state { pins = "gpio22"; function = "gpio"; bias-pull-up; drive-strength = <2>; - input-enable; }; - cam1_vdig_default: cam1-vdig-default-state { + chat_cam_pwr_en: chat-cam-pwr-en-default-state { pins = "gpio25"; function = "gpio"; bias-disable; drive-strength = <2>; }; - usb_extcon_active: usb-extcon-active-state { - pins = "gpio38"; + tof_reset: tof-reset-state { + pins = "gpio27"; function = "gpio"; bias-disable; - drive-strength = <16>; + drive-strength = <2>; }; - tof_reset: tof-reset-state { - pins = "gpio27"; + cc_dir_default: cc-dir-active-state { + pins = "gpio38"; function = "gpio"; bias-disable; - drive-strength = <2>; + drive-strength = <16>; }; - hall_sensor0_default: acc-cover-open-state { + acc_cover_open: acc-cover-open-state { pins = "gpio124"; function = "gpio"; bias-disable; drive-strength = <2>; - input-enable; }; ts_int_n: ts-int-n-state { @@ -685,7 +881,7 @@ bias-pull-up; }; - usb_vbus_active: usb-vbus-active-state { + usb_detect_en: usb-detect-en-active-state { pins = "gpio128"; function = "gpio"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts index 7956b151c7a4..2444b87fddf7 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts @@ -528,7 +528,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; mdss_dsi_active_state: mdss-dsi-active-state { @@ -620,7 +619,6 @@ function = "gpio"; drive-strength = <16>; bias-pull-up; - input-enable; }; ts_int_suspend_state: ts-int-suspend-state { @@ -642,7 +640,6 @@ function = "gpio"; bias-pull-down; drive-strength = <2>; - input-enable; }; wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 8bc1c59127e5..b150437a8355 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -922,7 +922,7 @@ phy-names = "pciephy"; status = "disabled"; - ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>, <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; #interrupt-cells = <1>; @@ -1524,7 +1524,7 @@ compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x06002000 0x1000>, <0x16280000 0x180000>; - reg-names = "stm-base", "stm-data-base"; + reg-names = "stm-base", "stm-stimulus-base"; status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -1993,7 +1993,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; usb3: usb@a8f8800 { @@ -2490,7 +2489,8 @@ }; apcs_glb: mailbox@17911000 { - compatible = "qcom,msm8998-apcs-hmss-global"; + compatible = "qcom,msm8998-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x17911000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm2250.dtsi new file mode 100644 index 000000000000..5f1d15db5c99 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm2250.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm2250", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + + pm2250_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + debounce = <15625>; + bias-pull-up; + }; + + pm2250_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm2250_gpios: gpio@c000 { + compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm2250_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm2250", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index fc0eccaccdf6..4bc717917f44 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm660 { + pm660-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index f9b3864bd3b9..87b71b7205b8 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm660l { + pm660l-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index 135bfb8d629b..cca45fad75ac 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -116,6 +116,12 @@ #address-cells = <1>; #size-cells = <0>; + pm8150l_flash: led-controller@d300 { + compatible = "qcom,pm8150l-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + pm8150l_lpg: pwm { compatible = "qcom,pm8150l-lpg"; diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi index 16bcfb64d735..72609f31c890 100644 --- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi @@ -55,5 +55,11 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pm8550b_eusb2_repeater: phy@fd00 { + compatible = "qcom,pm8550b-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index e2a6b66d8847..f4fb1a92ab55 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -41,7 +41,7 @@ }; }; - pm8916_usbin: extcon@1300 { + pm8916_usbin: usb-detect@1300 { compatible = "qcom,pm8941-misc"; reg = <0x1300>; interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index adbba9f4089a..340033ac3186 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -72,7 +72,7 @@ }; pm8998_coincell: charger@2800 { - compatible = "qcom,pm8941-coincell"; + compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index a0af91698d49..0192968f4d9b 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -49,8 +49,6 @@ pmi8994_spmi_regulators: regulators { compatible = "qcom,pmi8994-regulators"; - #address-cells = <1>; - #size-cells = <1>; }; pmi8994_wled: wled@d800 { diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi new file mode 100644 index 000000000000..ae5abc76bcc7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -0,0 +1,1561 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + * + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. + */ + +#include <dt-bindings/clock/qcom,gcc-qcm2290.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-qcm2290", "qcom,scm"; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + #reset-cells = <1>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x40000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: xbl-aop@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: sec-apps@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@46000000 { + compatible = "qcom,smem"; + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + pil_modem_mem: modem@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: video@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_adsp_mem: adsp@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1c00000>; + no-map; + }; + + pil_ipa_fw_mem: ipa-fw@53600000 { + reg = <0x0 0x53600000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: ipa-gsi@53610000 { + reg = <0x0 0x53610000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: zap@53615000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x53615000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: framebuffer@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: dpfs-data@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: reserved@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-qcm2290"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,qcm2290-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp5 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x00340000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,qcm2290-tlmm"; + reg = <0x0 0x00500000 0x0 0x300000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 127>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio8", "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio14", "gpio15"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1","gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_default: qup-spi3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_default: qup-spi4-default-state { + pins = "gpio12", "gpio13", "gpio96", "gpio97"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart0_default: qup-uart0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart4_default: qup-uart4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-qcm2290"; + reg = <0x0 0x01400000 0x0 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_hsphy: phy@1613000 { + compatible = "qcom,qcm2290-qusb2-phy"; + reg = <0x0 0x01613000 0x0 0x180>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + #phy-cells = <0>; + + status = "disabled"; + }; + + qfprom@1b44000 { + compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; + reg = <0x0 0x01b44000 0x0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x01c40000 0x0 0x1100>, + <0x0 0x01e00000 0x0 0x2000000>, + <0x0 0x03e00000 0x0 0x100000>, + <0x0 0x03f00000 0x0 0xa0000>, + <0x0 0x01c0a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tsens0: thermal-sensor@4411000 { + compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2"; + reg = <0x0 0x04411000 0x0 0x1ff>, + <0x0 0x04410000 0x0 0x8>; + #qcom,sensors = <10>; + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + rng: rng@4453000 { + compatible = "qcom,prng-ee"; + reg = <0x0 0x04453000 0x0 0x1000>; + clocks = <&rpmcc RPM_SMD_HWKM_CLK>; + clock-names = "core"; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x0 0x045f0000 0x0 0x7000>; + }; + + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x0 0x04690000 0x0 0x10000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04744000 0x0 0x1000>, + <0x0 0x04745000 0x0 0x1000>, + <0x0 0x04748000 0x0 0x8000>; + reg-names = "hc", + "cqhci", + "ice"; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", + "core", + "xo", + "ice"; + + resets = <&gcc GCC_SDCC1_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + iommus = <&apps_smmu 0xc0 0x0>; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <8>; + + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04784000 0x0 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC2_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0xa0 0x0>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + }; + }; + + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x04a00000 0x0 0x60000>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0xf6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x04ac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@4a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@4a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c4_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@4a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@4a90000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart4_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c5: i2c@4a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usb: usb@4ef8800 { + compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; + reg = <0x0 0x04ef8800 0x0 0x400>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133333333>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x04e00000 0x0 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDD_LPI_CX>, + <&rpmpd QCM2290_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x0c600000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + }; + + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x0 0x0c800000 0x0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + watchdog@f017000 { + compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt"; + reg = <0x0 0x0f017000 0x0 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sleep_clk>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,qcm2290-apcs-hmss-global"; + reg = <0x0 0x0f111000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0f120000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x0f121000 0x8000>; + + frame@0 { + reg = <0x0 0x1000>, + <0x1000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@2000 { + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@3000 { + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@4000 { + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@5000 { + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@6000 { + reg = <0x6000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@7000 { + reg = <0x7000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f300000 0x0 0x100000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + cpufreq_hw: cpufreq@f521000 { + compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0x0 0x0f521000 0x0 0x1000>; + reg-names = "freq-domain0"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + thermal-zones { + mapss-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + mapss_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_crit: wlan-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_crit: cpuss0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_crit: cpuss1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + mdm0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_crit: mdm0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + mdm1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_crit: mdm1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + hm-center-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + hm_center_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_crit: hm-center-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_crit: camera-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 04c82d1624eb..10655401528e 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -296,7 +296,6 @@ drive-strength = <2>; bias-pull-up; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index bc2ed73afb74..eefed585738c 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1302,7 +1302,8 @@ }; apcs_glb: mailbox@b011000 { - compatible = "qcom,qcs404-apcs-apps-global", "syscon"; + compatible = "qcom,qcs404-apcs-apps-global", + "qcom,msm8916-apcs-kpss-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; @@ -1469,8 +1470,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x10003000 0 0x00010000>, /* I/O */ - <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */ + ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */ + <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index f234159d2060..734438113bba 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -27,6 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD0>; power-domain-names = "psci"; @@ -45,6 +46,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD1>; power-domain-names = "psci"; @@ -60,6 +62,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD2>; power-domain-names = "psci"; @@ -75,6 +78,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD3>; power-domain-names = "psci"; @@ -412,8 +416,6 @@ pinctrl-0 = <&qup_uart0_default>; pinctrl-names = "default"; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -581,8 +583,6 @@ pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; pinctrl-names = "default"; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; }; @@ -1312,6 +1312,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; gem_noc: interconnect@19100000 { @@ -1320,6 +1321,18 @@ qcom,bcm-voters = <&apps_bcm_voter>; #interconnect-cells = <2>; }; + + system-cache-controller@19200000 { + compatible = "qcom,qdu1000-llcc"; + reg = <0 0x19200000 0 0xd80000>, + <0 0x1a200000 0 0x80000>, + <0 0x221c8128 0 0x4>; + reg-names = "llcc_base", + "llcc_broadcast_base", + "multi_channel_register"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + multi-ch-bit-off = <24 2>; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts new file mode 100644 index 000000000000..ef3616093289 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + */ + +/dts-v1/; + +#include "qcm2290.dtsi" +#include "pm2250.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Robotics RB1"; + compatible = "qcom,qrb2210-rb1", "qcom,qrb2210", "qcom,qcm2290"; + + aliases { + serial0 = &uart0; + sdhc1 = &sdhc_1; + sdhc2 = &sdhc_2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&key_volp_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 96 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; +}; + +&pm2250_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + non-removable; + supports-cqe; + no-sdio; + no-sd; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_state_on &sd_det_in_on>; + pinctrl-1 = <&sdc2_state_off &sd_det_in_off>; + pinctrl-names = "default", "sleep"; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + sd_det_in_on: sd-det-in-on-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sd_det_in_off: sd-det-in-off-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + key_volp_n: key-volp-n-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + output-disable; + }; +}; + +/* UART connected to the Micro-USB port via a FTDI chip */ +&uart0 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_hsphy { + status = "okay"; +}; + +&xo_board { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts new file mode 100644 index 000000000000..dc80f0bca767 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include "sm4250.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QRB4210 RB2"; + compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250"; + + aliases { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm6125-regulators"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>; + vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>; + vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>; + vdd-l6-l8-supply = <&vreg_s5a_0p848>; + vdd-l9-l11-supply = <&vreg_s7a_2p04>; + vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>; + vdd-l12-l16-supply = <&vreg_s7a_2p04>; + vdd-l23-l24-supply = <&vph_pwr>; + + vreg_s5a_0p848: s5 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s6a_1p352: s6 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1456000>; + }; + + vreg_s7a_2p04: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2080000>; + }; + + vreg_l1a_1p0: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + vreg_l4a_0p9: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_2p96: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + vreg_l6a_0p6: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a_1p256: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l8a_0p664: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l11a_1p8: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + vreg_l13a_1p8: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a_3p128: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a_1p3: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1384000>; + }; + + vreg_l18a_1p232: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1312000>; + }; + + vreg_l19a_1p8: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l20a_1p8: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l21a_2p704: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + }; + + vreg_l22a_2p96: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a_2p96: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3600000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&vreg_l24a_2p96>; + vqmmc-supply = <&vreg_l11a_1p8>; + no-sdio; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */ + vmmc-supply = <&vreg_l22a_2p96>; + vqmmc-supply = <&vreg_l5a_2p96>; + no-sdio; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <37 5>, <43 2>, <47 1>, + <49 1>, <52 1>, <54 1>, + <56 3>, <61 2>, <64 1>, + <68 1>, <72 8>, <96 1>; +}; + +&uart4 { + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index aa0a7bd7307c..dd924331b0ee 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -1012,7 +1012,7 @@ left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; @@ -1021,7 +1021,7 @@ right_spkr: speaker@0,4 { compatible = "sdw10217211000"; reg = <0 4>; - powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; #sound-dai-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 459384ec8f23..339fea522509 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -17,6 +17,7 @@ aliases { serial0 = &uart2; + serial1 = &uart9; }; chosen { @@ -400,6 +401,10 @@ status = "okay"; }; +&uart9 { + status = "okay"; +}; + &ufs_mem_hc { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 3ccb5ffdb3ca..24fa449d48a6 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -241,7 +241,7 @@ }; &remoteproc_nsp0 { - firmware-name = "qcom/sa8540p/cdsp.mbn"; + firmware-name = "qcom/sa8540p/cdsp0.mbn"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi new file mode 100644 index 000000000000..7602cca47bae --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmm8654au_0_thermal: pm8775-0-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_0_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_1_thermal: pm8775-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_1_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_2_thermal: pm8775-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_2_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_3_thermal: pm8775-3-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_3_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmm8654au_0: pmic@0 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_0_pon: pon@1200 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1200>, <0x800>; + reg-names = "hlos", "pbs"; + mode-recovery = <0x1>; + mode-bootloader = <0x2>; + + pmm8654au_0_pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + debounce = <15625>; + }; + + pmm8654au_0_pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts-extended = <&spmi_bus 0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + status = "disabled"; + }; + }; + + pmm8654au_0_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_0_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_1: pmic@2 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_1_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_2_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_2: pmic@4 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_2_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_2_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_3: pmic@6 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_3_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_3_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_3_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts new file mode 100644 index 000000000000..f238a02a5448 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sa8775p.dtsi" +#include "sa8775p-pmics.dtsi" + +/ { + model = "Qualcomm SA8775P Ride"; + compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; + + aliases { + serial0 = &uart10; + serial1 = &uart12; + serial2 = &uart17; + i2c18 = &i2c18; + spi16 = &spi16; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1816000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a: smps5 { + regulator-name = "vreg_s5a"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1996000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * FIXME: This should have regulator-allow-set-load but + * we're getting an over-current fault from the PMIC + * when switching to LPM. + */ + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e: smps4 { + regulator-name = "vreg_s4e"; + regulator-min-microvolt = <970000>; + regulator-max-microvolt = <1520000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7e: smps7 { + regulator-name = "vreg_s7e"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9e: smps9 { + regulator-name = "vreg_s9e"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c18 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c18_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pmm8654au_0_gpios { + gpio-line-names = "DS_EN", + "POFF_COMPLETE", + "UFS0_VER_ID", + "FAST_POFF", + "DBU1_PON_DONE", + "AOSS_SLEEP", + "CAM_DES0_EN", + "CAM_DES1_EN", + "CAM_DES2_EN", + "CAM_DES3_EN", + "UEFI", + "ANALOG_PON_OPT"; +}; + +&pmm8654au_1_gpios { + gpio-line-names = "PMIC_C_ID0", + "PMIC_C_ID1", + "UFS1_VER_ID", + "IPA_PWR", + "", + "WLAN_DBU4_EN", + "WLAN_EN", + "BT_EN", + "USB2_PWR_EN", + "USB2_FAULT"; +}; + +&pmm8654au_2_gpios { + gpio-line-names = "PMIC_E_ID0", + "PMIC_E_ID1", + "USB0_PWR_EN", + "USB0_FAULT", + "SENSOR_IRQ_1", + "SENSOR_IRQ_2", + "SENSOR_RST", + "SGMIIO0_RST", + "SGMIIO1_RST", + "USB1_PWR_ENABLE", + "USB1_FAULT", + "VMON_SPX8"; +}; + +&pmm8654au_3_gpios { + gpio-line-names = "PMIC_G_ID0", + "PMIC_G_ID1", + "GNSS_RST", + "GNSS_EN", + "GNSS_BOOT_MODE"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&spi16 { + pinctrl-0 = <&qup_spi16_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + qup_uart10_default: qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + + qup_spi16_default: qup-spi16-state { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c18_default: qup-i2c18-state { + pins = "gpio95", "gpio96"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart12_default: qup-uart12-state { + qup_uart12_cts: qup-uart12-cts-pins { + pins = "gpio52"; + function = "qup1_se5"; + bias-disable; + }; + + qup_uart12_rts: qup-uart12-rts-pins { + pins = "gpio53"; + function = "qup1_se5"; + bias-pull-down; + }; + + qup_uart12_tx: qup-uart12-tx-pins { + pins = "gpio54"; + function = "qup1_se5"; + bias-pull-up; + }; + + qup_uart12_rx: qup-uart12-rx-pins { + pins = "gpio55"; + function = "qup1_se5"; + bias-pull-down; + }; + }; + + qup_uart17_default: qup-uart17-state { + qup_uart17_cts: qup-uart17-cts-pins { + pins = "gpio91"; + function = "qup2_se3"; + bias-disable; + }; + + qup_uart17_rts: qup0-uart17-rts-pins { + pins = "gpio92"; + function = "qup2_se3"; + bias-pull-down; + }; + + qup_uart17_tx: qup0-uart17-tx-pins { + pins = "gpio93"; + function = "qup2_se3"; + bias-pull-up; + }; + + qup_uart17_rx: qup0-uart17-rx-pins { + pins = "gpio94"; + function = "qup2_se3"; + bias-pull-down; + }; + }; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + pinctrl-0 = <&qup_uart10_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart12 { + pinctrl-0 = <&qup_uart12_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart17 { + pinctrl-0 = <&qup_uart17_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi new file mode 100644 index 000000000000..2343df7e0ea4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -0,0 +1,981 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sa8775p-gcc.h> +#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@10000 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10000>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + L3_1: l3-cache { + compatible = "cache"; + }; + + }; + }; + + CPU5: cpu@10100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10100>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + CPU6: cpu@10200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10200>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + CPU7: cpu@10300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10300>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sa8775p", "qcom,scm"; + }; + }; + + aggre1_noc: interconnect-aggre1-noc { + compatible = "qcom,sa8775p-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect-aggre2-noc { + compatible = "qcom,sa8775p-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sa8775p-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect-config-noc { + compatible = "qcom,sa8775p-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect-dc-noc { + compatible = "qcom,sa8775p-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect-gem-noc { + compatible = "qcom,sa8775p-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gpdsp_anoc: interconnect-gpdsp-anoc { + compatible = "qcom,sa8775p-gpdsp-anoc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect-lpass-ag-noc { + compatible = "qcom,sa8775p-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sa8775p-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect-mmss-noc { + compatible = "qcom,sa8775p-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspa_noc: interconnect-nspa-noc { + compatible = "qcom,sa8775p-nspa-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspb_noc: interconnect-nspb-noc { + compatible = "qcom,sa8775p-nspb-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_anoc: interconnect-pcie-anoc { + compatible = "qcom,sa8775p-pcie-anoc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect-system-noc { + compatible = "qcom,sa8775p-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + /* Will be updated by the bootloader. */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x0>; + }; + + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + sail_ss_mem: sail-ss@80000000 { + reg = <0x0 0x80000000 0x0 0x10000000>; + no-map; + }; + + hyp_mem: hyp@90000000 { + reg = <0x0 0x90000000 0x0 0x600000>; + no-map; + }; + + xbl_boot_mem: xbl-boot@90600000 { + reg = <0x0 0x90600000 0x0 0x200000>; + no-map; + }; + + aop_image_mem: aop-image@90800000 { + reg = <0x0 0x90800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@90860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x90860000 0x0 0x20000>; + no-map; + }; + + uefi_log: uefi-log@908b0000 { + reg = <0x0 0x908b0000 0x0 0x10000>; + no-map; + }; + + reserved_mem: reserved@908f0000 { + reg = <0x0 0x908f0000 0x0 0xf000>; + no-map; + }; + + secdata_apss_mem: secdata-apss@908ff000 { + reg = <0x0 0x908ff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@90900000 { + compatible = "qcom,smem"; + reg = <0x0 0x90900000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + cpucp_fw_mem: cpucp-fw@90b00000 { + reg = <0x0 0x90b00000 0x0 0x100000>; + no-map; + }; + + lpass_machine_learning_mem: lpass-machine-learning@93b00000 { + reg = <0x0 0x93b00000 0x0 0xf00000>; + no-map; + }; + + adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 { + reg = <0x0 0x94a00000 0x0 0x800000>; + no-map; + }; + + pil_camera_mem: pil-camera@95200000 { + reg = <0x0 0x95200000 0x0 0x500000>; + no-map; + }; + + pil_adsp_mem: pil-adsp@95c00000 { + reg = <0x0 0x95c00000 0x0 0x1e00000>; + no-map; + }; + + pil_gdsp0_mem: pil-gdsp0@97b00000 { + reg = <0x0 0x97b00000 0x0 0x1e00000>; + no-map; + }; + + pil_gdsp1_mem: pil-gdsp1@99900000 { + reg = <0x0 0x99900000 0x0 0x1e00000>; + no-map; + }; + + pil_cdsp0_mem: pil-cdsp0@9b800000 { + reg = <0x0 0x9b800000 0x0 0x1e00000>; + no-map; + }; + + pil_gpu_mem: pil-gpu@9d600000 { + reg = <0x0 0x9d600000 0x0 0x2000>; + no-map; + }; + + pil_cdsp1_mem: pil-cdsp1@9d700000 { + reg = <0x0 0x9d700000 0x0 0x1e00000>; + no-map; + }; + + pil_cvp_mem: pil-cvp@9f500000 { + reg = <0x0 0x9f500000 0x0 0x700000>; + no-map; + }; + + pil_video_mem: pil-video@9fc00000 { + reg = <0x0 0x9fc00000 0x0 0x700000>; + no-map; + }; + + hyptz_reserved_mem: hyptz-reserved@beb00000 { + reg = <0x0 0xbeb00000 0x0 0x11500000>; + no-map; + }; + + tz_stat_mem: tz-stat@d0000000 { + reg = <0x0 0xd0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@d0100000 { + reg = <0x0 0xd0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@d1300000 { + reg = <0x0 0xd1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@d1800000 { + reg = <0x0 0xd1800000 0x0 0x3900000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,sa8775p-gcc"; + reg = <0x0 0x00100000 0x0 0xc7018>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SA8775P_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sa8775p-ipcc", "qcom,ipcc"; + reg = <0x0 0x00408000 0x0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x5a3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + spi16: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart17: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x0088c000 0x0 0x4000>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c18: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x443 0x0>; + status = "disabled"; + + uart10: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interconnect-names = "qup-core", "qup-config"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 + &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_QUP_1 0>; + power-domains = <&rpmhpd SA8775P_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + uart12: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a94000 0x0 0x4000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sa8775p-pdc", "qcom,pdc"; + reg = <0x0 0x0b220000 0x0 0x30000>, + <0x0 0x17c000f0 0x0 0x64>; + qcom,pdc-ranges = <0 480 40>, + <40 140 14>, + <54 263 1>, + <55 306 4>, + <59 312 3>, + <62 374 2>, + <64 434 2>, + <66 438 2>, + <70 520 1>, + <73 523 1>, + <118 568 6>, + <124 609 3>, + <159 638 1>, + <160 720 3>, + <169 728 30>, + <199 416 2>, + <201 449 1>, + <202 89 1>, + <203 451 1>, + <204 462 1>, + <205 264 1>, + <206 579 1>, + <207 653 1>, + <208 656 1>, + <209 659 1>, + <210 122 1>, + <211 699 1>, + <212 705 1>, + <213 450 1>, + <214 643 2>, + <216 646 5>, + <221 390 5>, + <226 700 2>, + <228 440 1>, + <229 663 1>, + <230 524 2>, + <232 612 3>, + <235 723 5>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x1100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x100000>, + <0x0 0x0e700000 0x0 0xa0000>, + <0x0 0x0c40a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + qcom,channel = <0>; + qcom,ee = <0>; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,sa8775p-tlmm"; + reg = <0x0 0x0f000000 0x0 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 149>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + memtimer: timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + ranges = <0x0 0x0 0x0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17c21000 { + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@17c23000 { + reg = <0x17c23000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@17c25000 { + reg = <0x17c25000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@17c27000 { + reg = <0x17c27000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@17c29000 { + reg = <0x17c29000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@17c2b000 { + reg = <0x17c2b000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@17c2d000 { + reg = <0x17c2d000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 0>; + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sa8775p-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sa8775p-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-0 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp-1 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp-4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp-5 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-8 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sa8775p-cpufreq-epss", + "qcom,cpufreq-epss"; + reg = <0x0 0x18591000 0x0 0x1000>, + <0x0 0x18593000 0x0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + arch_timer: timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index c3bdd3295c02..9f052270e090 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -312,14 +312,9 @@ reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel0_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; @@ -354,7 +349,7 @@ &qspi { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; flash@0 { compatible = "jedec,spi-nor"; @@ -512,8 +507,11 @@ bias-disable; }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ +&qspi_data0 { + bias-pull-up; +}; + +&qspi_data1 { bias-pull-up; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts deleted file mode 100644 index 3abd6222fe46..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts +++ /dev/null @@ -1,38 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Kingoftown board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-ti-sn65dsi86.dtsi" -#include "sc7180-trogdor-kingoftown.dtsi" - -/ { - model = "Google Kingoftown (rev0)"; - compatible = "google,kingoftown-rev0", "qcom,sc7180"; -}; - -/* - * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a - * power rail instead, since kingoftown does not have FP. - */ -&pp3300_fp_tp { - gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; -}; - -&tlmm { - en_fp_rails: en-fp-rails-state { - pins = "gpio74"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts deleted file mode 100644 index e0752ba7df11..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts +++ /dev/null @@ -1,17 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Kingoftown board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-parade-ps8640.dtsi" -#include "sc7180-trogdor-kingoftown.dtsi" - -/ { - model = "Google Kingoftown (rev1+)"; - compatible = "google,kingoftown", "qcom,sc7180"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts index 315ac5eb5f78..36326ef972dc 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts @@ -5,10 +5,18 @@ * Copyright 2021 Google LLC. */ -/* This file must be included after sc7180-trogdor.dtsi */ +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" #include <arm/cros-ec-keyboard.dtsi> #include "sc7180-trogdor-lte-sku.dtsi" +/ { + model = "Google Kingoftown"; + compatible = "google,kingoftown", "qcom,sc7180"; +}; + &alc5682 { compatible = "realtek,rt5682s"; /delete-property/ VBAT-supply; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts index 850776c5323d..70d5a7aa8873 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts @@ -26,7 +26,7 @@ interrupt-parent = <&tlmm>; interrupts = <58 IRQ_TYPE_EDGE_FALLING>; - vcc-supply = <&pp3300_fp_tp>; + vdd-supply = <&pp3300_fp_tp>; hid-descr-addr = <0x20>; wakeup-source; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts index 235cda2bba5e..7f01573b5543 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -23,7 +23,7 @@ /delete-node/&ap_ts; &panel { - compatible = "innolux,n116bca-ea1", "innolux,n116bge"; + compatible = "innolux,n116bca-ea1"; }; &sdhc_2 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts deleted file mode 100644 index d49de65aa960..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ /dev/null @@ -1,34 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Lazor board device tree source - * - * Copyright 2020 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-ti-sn65dsi86.dtsi" -#include "sc7180-trogdor-lazor.dtsi" - -/ { - model = "Google Lazor (rev0)"; - compatible = "google,lazor-rev0", "qcom,sc7180"; -}; - -&sn65dsi86_out { - /* - * Lane 0 was incorrectly mapped on the cable, but we've now decided - * that the cable is canon and in -rev1+ we'll make a board change - * that means we no longer need the swizzle. - */ - lane-polarities = <1 0>; -}; - -&usb_hub_2_x { - vdd-supply = <&pp3300_l7c>; -}; - -&usb_hub_3_x { - vdd-supply = <&pp3300_l7c>; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts deleted file mode 100644 index 2767817fb053..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x0 => 0 - * - bits 7..4: Panel ID: 0x0 (AUO) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland-rev0.dtsi" - -/ { - model = "Google Mrbland rev0 AUO panel board"; - compatible = "google,mrbland-rev0-sku0", "qcom,sc7180"; -}; - -&panel { - compatible = "auo,b101uan08.3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts deleted file mode 100644 index 711485574a03..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x10 => 16 - * - bits 7..4: Panel ID: 0x1 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland-rev0.dtsi" - -/ { - model = "Google Mrbland rev0 BOE panel board"; - compatible = "google,mrbland-rev0-sku16", "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv101wum-n53"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi deleted file mode 100644 index f4c1f3813664..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi +++ /dev/null @@ -1,36 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -&avdd_lcd { - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; -}; - -&panel { - enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; -}; - -&v1p8_mipi { - gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */ -&avdd_lcd_en { - pins = "gpio80"; -}; - -&mipi_1800_en { - pins = "gpio81"; -}; - -&vdd_reset_1800 { - pins = "gpio76"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts deleted file mode 100644 index 275313ef7554..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x600 => 1536 - * - bits 11..8: Panel ID: 0x6 (AUO) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -/ { - model = "Google Mrbland rev1+ AUO panel board"; - compatible = "google,mrbland-sku1536", "qcom,sc7180"; -}; - -&panel { - compatible = "auo,b101uan08.3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts deleted file mode 100644 index 87c6b6c30b5e..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts +++ /dev/null @@ -1,24 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x300 => 768 - * - bits 11..8: Panel ID: 0x3 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -/ { - model = "Google Mrbland (rev1 - 2) BOE panel board"; - /* Uses ID 768 on rev1 and 1024 on rev2+ */ - compatible = "google,mrbland-sku1024", "google,mrbland-sku768", - "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv101wum-n53"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi deleted file mode 100644 index ed12ee35f06b..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi +++ /dev/null @@ -1,320 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" - -/* This board only has 1 USB Type-C port. */ -/delete-node/ &usb_c1; - -/ { - avdd_lcd: avdd-lcd-regulator { - compatible = "regulator-fixed"; - regulator-name = "avdd_lcd"; - - gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_lcd_en>; - - vin-supply = <&pp5000_a>; - }; - - avee_lcd: avee-lcd-regulator { - compatible = "regulator-fixed"; - regulator-name = "avee_lcd"; - - gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&avee_lcd_en>; - - vin-supply = <&pp5000_a>; - }; - - v1p8_mipi: v1p8-mipi-regulator { - compatible = "regulator-fixed"; - regulator-name = "v1p8_mipi"; - - gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&mipi_1800_en>; - - vin-supply = <&pp3300_a>; - }; -}; - -&backlight { - pwms = <&cros_ec_pwm 0>; -}; - -&camcc { - status = "okay"; -}; - -&cros_ec { - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; -}; - -&dsi0 { - - panel: panel@0 { - /* Compatible will be filled in per-board */ - reg = <0>; - enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vdd_reset_1800>; - avdd-supply = <&avdd_lcd>; - avee-supply = <&avee_lcd>; - pp1800-supply = <&v1p8_mipi>; - pp3300-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - rotation = <270>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&gpio_keys { - status = "okay"; -}; - -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@5d { - compatible = "goodix,gt7375p"; - reg = <0x5d>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - - reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; - - vdd-supply = <&pp3300_ts>; - }; -}; - -&pp1800_uf_cam { - status = "okay"; -}; - -&pp1800_wf_cam { - status = "okay"; -}; - -&pp2800_uf_cam { - status = "okay"; -}; - -&pp2800_wf_cam { - status = "okay"; -}; - -&wifi { - qcom,ath10k-calibration-variant = "GO_MRBLAND"; -}; - -/* - * No eDP on this board but it's logically the same signal so just give it - * a new name and assign the proper GPIO. - */ -pp3300_disp_on: &pp3300_dx_edp { - gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor.dtsi */ - -/* - * No eDP on this board but it's logically the same signal so just give it - * a new name and assign the proper GPIO. - */ - -tp_en: &en_pp3300_dx_edp { - pins = "gpio85"; -}; - -/* PINCTRL - board-specific pinctrl */ - -&tlmm { - gpio-line-names = "HUB_RST_L", - "AP_RAM_ID0", - "AP_SKU_ID2", - "AP_RAM_ID1", - "", - "AP_RAM_ID2", - "UF_CAM_EN", - "WF_CAM_EN", - "TS_RESET_L", - "TS_INT_L", - "", - "", - "AP_EDP_BKLTEN", - "UF_CAM_MCLK", - "WF_CAM_CLK", - "", - "", - "UF_CAM_SDA", - "UF_CAM_SCL", - "WF_CAM_SDA", - "WF_CAM_SCL", - "AVEE_LCD_EN", - "", - "AMP_EN", - "", - "", - "", - "", - "HP_IRQ", - "WF_CAM_RST_L", - "UF_CAM_RST_L", - "AP_BRD_ID2", - "", - "AP_BRD_ID0", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - "AP_H1_SPI_CLK", - "AP_H1_SPI_CS_L", - "BT_UART_CTS", - "BT_UART_RTS", - "BT_UART_TXD", - "BT_UART_RXD", - "H1_AP_INT_ODL", - "", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "HP_I2C_SDA", - "HP_I2C_SCL", - "FORCED_USB_BOOT", - "AMP_BCLK", - "AMP_LRCLK", - "AMP_DIN", - "PEN_DET_ODL", - "HP_BCLK", - "HP_LRCLK", - "HP_DOUT", - "HP_DIN", - "HP_MCLK", - "AP_SKU_ID0", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "AP_SPI_CLK", - "AP_SPI_MOSI", - "AP_SPI_MISO", - /* - * AP_FLASH_WP_L is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_L. - */ - "AP_FLASH_WP_L", - "", - "AP_SPI_CS0_L", - "", - "", - "", - "", - "WLAN_SW_CTRL", - "", - "REPORT_E", - "", - "ID0", - "", - "ID1", - "", - "", - "", - "CODEC_PWR_EN", - "HUB_EN", - "TP_EN", - "MIPI_1.8V_EN", - "VDD_RESET_1.8V", - "AVDD_LCD_EN", - "", - "AP_SKU_ID1", - "AP_RST_REQ", - "", - "AP_BRD_ID1", - "AP_EC_INT_L", - "SDM_GRFC_3", - "", - "", - "BOOT_CONFIG_4", - "BOOT_CONFIG_2", - "", - "", - "", - "", - "", - "", - "", - "BOOT_CONFIG_3", - "WCI2_LTE_COEX_TXD", - "WCI2_LTE_COEX_RXD", - "", - "", - "", - "", - "FORCED_USB_BOOT_POL", - "AP_TS_PEN_I2C_SDA", - "AP_TS_PEN_I2C_SCL", - "DP_HOT_PLUG_DET", - "EC_IN_RW_ODL"; - - avdd_lcd_en: avdd-lcd-en-state { - pins = "gpio88"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - avee_lcd_en: avee-lcd-en-state { - pins = "gpio21"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - mipi_1800_en: mipi-1800-en-state { - pins = "gpio86"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - vdd_reset_1800: vdd-reset-1800-state { - pins = "gpio87"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi index d06cc4ea3375..8823edbb4d6e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi @@ -39,7 +39,7 @@ interrupt-parent = <&tlmm>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - vcc-supply = <&pp3300_fp_tp>; + vdd-supply = <&pp3300_fp_tp>; post-power-on-delay-ms = <100>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi index bc4f3b6c6634..273e2249f018 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi @@ -12,6 +12,7 @@ compatible = "realtek,rt5682s"; realtek,dmic1-clk-pin = <2>; realtek,dmic-clk-rate-hz = <2048000>; + /delete-property/ VBAT-supply; }; ap_ts_pen_1v8: &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index cb41ccdaccfd..8e7b42f843d4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -65,14 +65,9 @@ backlight = <&backlight>; rotation = <270>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts deleted file mode 100644 index d6ed7d0afe4a..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x10 => 16 - * - bits 7..4: Panel ID: 0x1 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler-rev0.dtsi" - -/ { - model = "Google Wormdingler rev0 BOE panel board"; - compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv110c9m-ll3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts deleted file mode 100644 index c03525ea64ca..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x0 => 0 - * - bits 7..4: Panel ID: 0x0 (INX) - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler-rev0.dtsi" - -/ { - model = "Google Wormdingler rev0 INX panel board"; - compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180"; -}; - -&panel { - compatible = "innolux,hj110iz-01a"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi deleted file mode 100644 index 7f272c6e95f6..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi +++ /dev/null @@ -1,36 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler.dtsi" - -&avdd_lcd { - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; -}; - -&panel { - enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; -}; - -&v1p8_mipi { - gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */ -&avdd_lcd_en { - pins = "gpio80"; -}; - -&mipi_1800_en { - pins = "gpio81"; -}; - -&vdd_reset_1800 { - pins = "gpio76"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 9832e752da35..262d6691abd9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -124,14 +124,9 @@ backlight = <&backlight>; rotation = <270>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 423630c4d02c..ca6920de7ea8 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -424,8 +424,9 @@ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; flash@0 { compatible = "jedec,spi-nor"; @@ -512,6 +513,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; }; pp1800_prox: @@ -1044,17 +1047,20 @@ ap_spi_fp: &spi10 { }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ }; &qspi_clk { drive-strength = <8>; - bias-disable; + bias-disable; /* Rely on Cr50 internal pulldown */ }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-disable; /* Rely on Cr50 internal pulldown */ +}; + +&qspi_data1 { + bias-pull-down; }; &qup_i2c2_default { @@ -1204,7 +1210,6 @@ ap_spi_fp: &spi10 { ap_ec_int_l: ap-ec-int-l-state { pins = "gpio94"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1227,7 +1232,6 @@ ap_spi_fp: &spi10 { bios_flash_wp_l: bios-flash-wp-l-state { pins = "gpio66"; function = "gpio"; - input-enable; bias-disable; }; @@ -1269,7 +1273,6 @@ ap_spi_fp: &spi10 { fp_to_ap_irq_l: fp-to-ap-irq-l-state { pins = "gpio4"; function = "gpio"; - input-enable; /* Has external pullup */ bias-disable; @@ -1284,7 +1287,6 @@ ap_spi_fp: &spi10 { h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio42"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1333,12 +1335,27 @@ ap_spi_fp: &spi10 { p_sensor_int_l: p-sensor-int-l-state { pins = "gpio24"; function = "gpio"; - input-enable; /* Has external pullup */ bias-disable; }; + qspi_sleep: qspi-sleep-state { + pins = "gpio63", "gpio64", "gpio65", "gpio68"; + + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; + qup_uart3_sleep: qup-uart3-sleep-state { cts-pins { /* diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index ebfa21e9ed8a..ea1ffade1aa1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -76,6 +76,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -103,6 +104,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -126,6 +128,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -149,6 +152,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -172,6 +176,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -195,6 +200,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -218,6 +224,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -241,6 +248,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -1535,12 +1543,17 @@ function = "qspi_cs"; }; - qspi_data01: qspi-data01-state { - pins = "gpio64", "gpio65"; + qspi_data0: qspi-data0-state { + pins = "gpio64"; function = "qspi_data"; }; - qspi_data12: qspi-data12-state { + qspi_data1: qspi-data1-state { + pins = "gpio65"; + function = "qspi_data"; + }; + + qspi_data23: qspi-data23-state { pins = "gpio66", "gpio67"; function = "qspi_data"; }; @@ -2760,7 +2773,7 @@ system-cache-controller@9200000 { compatible = "qcom,sc7180-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg-names = "llcc0_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -3019,7 +3032,6 @@ required-opps = <&rpmhpd_opp_nom>; }; }; - }; dsi0: dsi@ae94000 { @@ -3280,7 +3292,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sram@146aa000 { @@ -3407,7 +3418,8 @@ }; apss_shared: mailbox@17c00000 { - compatible = "qcom,sc7180-apss-shared"; + compatible = "qcom,sc7180-apss-shared", + "qcom,sdm845-apss-shared"; reg = <0 0x17c00000 0 0x10000>; #mbox-cells = <1>; }; @@ -3570,7 +3582,7 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sc7180-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; @@ -3578,6 +3590,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; wifi: wifi@18800000 { diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 16fb20369c01..f562e4d2b655 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -60,8 +60,9 @@ */ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; spi_flash: flash@0 { compatible = "jedec,spi-nor"; @@ -85,3 +86,23 @@ iommus = <&apps_smmu 0x1c02 0x1>; }; }; + +/* PINCTRL - chrome-common pinctrl */ + +&tlmm { + qspi_sleep: qspi-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index 1185141f348e..afae7f46b050 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -27,7 +27,7 @@ }; &apps_rsc { - pmg1110-regulators { + regulators-2 { compatible = "qcom,pmg1110-rpmh-regulators"; qcom,pmic-id = "k"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi index 1ca11a14104d..485f9942e128 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi @@ -94,6 +94,8 @@ hp_i2c: &i2c2 { interrupts = <101 IRQ_TYPE_EDGE_BOTH>; AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; MICVDD-supply = <&pp3300_codec>; realtek,dmic1-data-pin = <1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi index 69e7aa7b2f6c..8b855345e5c7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi @@ -76,6 +76,8 @@ hp_i2c: &i2c2 { interrupts = <101 IRQ_TYPE_EDGE_BOTH>; AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; MICVDD-supply = <&pp3300_codec>; realtek,dmic1-data-pin = <1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index 4e0b013e25f4..df39a64da923 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -40,7 +40,7 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ &apps_rsc { - pmg1110-regulators { + regulators-2 { compatible = "qcom,pmg1110-rpmh-regulators"; qcom,pmic-id = "k"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi index 818d4046d2c7..38c8a3679fcb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi @@ -33,7 +33,7 @@ ap_tp_i2c: &i2c0 { interrupts = <7 IRQ_TYPE_EDGE_FALLING>; hid-descr-addr = <0x20>; - vcc-supply = <&pp3300_z1>; + vdd-supply = <&pp3300_z1>; wakeup-source; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index b6137816f2f3..5b1c175c47f1 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -464,7 +464,7 @@ ap_i2c_tpm: &i2c14 { &mdss_dp_out { data-lanes = <0 1>; - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; }; &mdss_mdp { @@ -692,18 +692,22 @@ ap_ec_spi: &spi10 { }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ drive-strength = <8>; }; &qspi_clk { - bias-disable; + bias-pull-down; /* No external pulls */ drive-strength = <8>; }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-pull-down; /* No external pulls */ + drive-strength = <8>; +}; + +&qspi_data1 { + bias-disable; /* External pulldown */ drive-strength = <8>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi index 3cfeb118d379..ebae545c587c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -82,14 +82,12 @@ ap_h1_spi: &spi14 { ap_ec_int_l: ap-ec-int-l-state { pins = "gpio18"; function = "gpio"; - input-enable; bias-pull-up; }; h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio104"; function = "gpio"; - input-enable; bias-pull-up; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index ba64316b4427..15222e92e3f5 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -25,7 +25,7 @@ }; &apps_rsc { - pmr735a-regulators { + regulators-2 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 8b5293e7fd2a..c6dc200c00ce 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -70,7 +70,7 @@ gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEUP>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; linux,can-disable; }; @@ -184,7 +184,7 @@ }; &apps_rsc { - pm7325-regulators { + regulators-0 { compatible = "qcom,pm7325-rpmh-regulators"; qcom,pmic-id = "b"; @@ -279,7 +279,7 @@ }; }; - pm8350c-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -636,16 +636,19 @@ }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ }; &qspi_clk { - bias-disable; + bias-pull-down; /* No external pulls or external pulldown */ }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-pull-down; /* No external pulls or external pulldown */ +}; + +&qspi_data1 { + bias-pull-down; /* No external pulls or external pulldown */ }; &qup_uart5_tx { diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 88204f794ccb..88b3586e389f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -87,7 +87,7 @@ * are left out of here since they are managed elsewhere. */ - pm7325-regulators { + regulators-0 { compatible = "qcom,pm7325-rpmh-regulators"; qcom,pmic-id = "b"; @@ -188,7 +188,7 @@ }; }; - pm8350c-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -354,14 +354,9 @@ backlight = <&pm8350c_pwm_backlight>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - edp_panel_in: endpoint { - remote-endpoint = <&mdss_edp_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_edp_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index bdcb74925313..31728f461422 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -168,6 +168,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -193,6 +194,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -214,6 +216,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -235,6 +238,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -256,6 +260,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -277,6 +282,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -298,6 +304,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -319,6 +326,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -935,7 +943,6 @@ opp-avg-kBps = <390000 0>; }; }; - }; gpi_dma0: dma-controller@900000 { @@ -2077,7 +2084,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; @@ -2131,7 +2138,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie1_clkreq_n>; - iommus = <&apps_smmu 0x1c80 0x1>; + dma-coherent; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -2677,7 +2684,8 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x20000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -3289,7 +3297,6 @@ opp-avg-kBps = <200000 0>; }; }; - }; usb_1_hsphy: phy@88e3000 { @@ -3531,7 +3538,7 @@ }; pmu@90b6400 { - compatible = "qcom,sc7280-cpu-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sc7280-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x090b6400 0 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; @@ -3582,8 +3589,9 @@ system-cache-controller@9200000 { compatible = "qcom,sc7280-llcc"; - reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -3593,12 +3601,17 @@ <0 0x088e2000 0 0x1000>; interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; eud_ep: endpoint { remote-endpoint = <&usb2_role_switch>; }; }; port@1 { + reg = <1>; eud_con: endpoint { remote-endpoint = <&con_eud>; }; @@ -3609,7 +3622,11 @@ eud_typec: connector { compatible = "usb-c-connector"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; con_eud: endpoint { remote-endpoint = <&eud_con>; }; @@ -3748,7 +3765,6 @@ required-opps = <&rpmhpd_opp_turbo>; }; }; - }; videocc: clock-controller@aaf0000 { @@ -4337,12 +4353,17 @@ function = "qspi_cs"; }; - qspi_data01: qspi-data01-state { - pins = "gpio12", "gpio13"; + qspi_data0: qspi-data0-state { + pins = "gpio12"; + function = "qspi_data"; + }; + + qspi_data1: qspi-data1-state { + pins = "gpio13"; function = "qspi_data"; }; - qspi_data12: qspi-data12-state { + qspi_data23: qspi-data23-state { pins = "gpio16", "gpio17"; function = "qspi_data"; }; @@ -5164,20 +5185,20 @@ intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - #interrupt-cells = <3>; - interrupt-controller; reg = <0 0x17a00000 0 0x10000>, /* GICD */ <0 0x17a60000 0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <2>; + #size-cells = <2>; + ranges; - gic-its@17a40000 { + msi-controller@17a40000 { compatible = "arm,gic-v3-its"; + reg = <0 0x17a40000 0 0x20000>; msi-controller; #msi-cells = <1>; - reg = <0 0x17a40000 0 0x20000>; status = "disabled"; }; }; @@ -5337,6 +5358,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 98a0f1f9f01e..5b25d54b9591 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -413,11 +413,9 @@ backlight = <&backlight>; - ports { - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss0_dp3_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; }; }; }; @@ -563,6 +561,21 @@ status = "okay"; }; +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + &qup0 { status = "okay"; }; @@ -857,7 +870,7 @@ pins = "gpio101"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; @@ -882,7 +895,7 @@ pins = "gpio48"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 98e71b933437..bdcba719fc38 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -24,6 +24,7 @@ aliases { i2c4 = &i2c4; i2c21 = &i2c21; + serial1 = &uart2; }; wcd938x: audio-codec { @@ -363,13 +364,18 @@ compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; + vdd-l1-l4-supply = <&vreg_s12b>; + vdd-l2-l7-supply = <&vreg_bob>; vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; vreg_s10b: smps10 { regulator-name = "vreg_s10b"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_s11b: smps11 { @@ -377,6 +383,7 @@ regulator-min-microvolt = <1272000>; regulator-max-microvolt = <1272000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_s12b: smps12 { @@ -384,6 +391,7 @@ regulator-min-microvolt = <984000>; regulator-max-microvolt = <984000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l3b: ldo3 { @@ -413,7 +421,21 @@ regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; + vdd-bob-supply = <&vreg_vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1c>; + vdd-l2-l8-supply = <&vreg_s1c>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s11b>; + + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; vreg_l1c: ldo1 { regulator-name = "vreg_l1c"; @@ -441,6 +463,7 @@ regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-always-on; }; }; @@ -449,6 +472,10 @@ qcom,pmic-id = "d"; vdd-l1-l4-supply = <&vreg_s11b>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; vreg_l3d: ldo3 { regulator-name = "vreg_l3d"; @@ -527,11 +554,9 @@ backlight = <&backlight>; power-supply = <&vreg_edp_3p3>; - ports { - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss0_dp3_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; }; }; }; @@ -570,6 +595,7 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&ts0_default>; @@ -580,7 +606,7 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&i2c21_default>; + pinctrl-0 = <&i2c21_default>, <&tpad_default>; status = "okay"; @@ -591,13 +617,9 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + vddl-supply = <&vreg_s10b>; wakeup-source; - - status = "disabled"; }; touchpad@2c { @@ -607,9 +629,7 @@ hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + vddl-supply = <&vreg_s10b>; wakeup-source; }; @@ -621,6 +641,7 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&kybd_default>; @@ -677,6 +698,23 @@ pinctrl-0 = <&pcie4_default>; status = "okay"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + qcom,ath11k-calibration-variant = "LE_X13S"; + }; + }; }; &pcie4_phy { @@ -766,81 +804,109 @@ status = "okay"; }; +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + &pmk8280_vadc { status = "okay"; pmic-die-temp@3 { reg = <PMK8350_ADC7_DIE_TEMP>; qcom,pre-scaling = <1 1>; + label = "pmk8350_die_temp"; }; xo-therm@44 { reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; qcom,hw-settle-time = <200>; qcom,ratiometric; + label = "pmk8350_xo_therm"; }; pmic-die-temp@103 { reg = <PM8350_ADC7_DIE_TEMP(1)>; qcom,pre-scaling = <1 1>; + label = "pmc8280_1_die_temp"; }; sys-therm@144 { reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; qcom,hw-settle-time = <200>; qcom,ratiometric; + label = "sys_therm1"; }; sys-therm@145 { reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; qcom,hw-settle-time = <200>; qcom,ratiometric; + label = "sys_therm2"; }; sys-therm@146 { reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; qcom,hw-settle-time = <200>; qcom,ratiometric; + label = "sys_therm3"; }; sys-therm@147 { reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,hw-settle-time = <200>; qcom,ratiometric; + label = "sys_therm4"; }; pmic-die-temp@303 { reg = <PM8350_ADC7_DIE_TEMP(3)>; qcom,pre-scaling = <1 1>; + label = "pmc8280_2_die_temp"; }; sys-therm@344 { reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; qcom,hw-settle-time = <200>; qcom,ratiometric; + label = "sys_therm5"; }; sys-therm@345 { reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>; qcom,hw-settle-time = <200>; qcom,ratiometric; + label = "sys_therm6"; }; sys-therm@346 { reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>; qcom,hw-settle-time = <200>; qcom,ratiometric; + label = "sys_therm7"; }; sys-therm@347 { reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>; qcom,hw-settle-time = <200>; qcom,ratiometric; + label = "sys_therm8"; }; pmic-die-temp@403 { reg = <PMR735A_ADC7_DIE_TEMP>; qcom,pre-scaling = <1 1>; + label = "pmr735a_die_temp"; }; }; @@ -884,9 +950,9 @@ "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", - "TX DMIC0", "MIC BIAS1", - "TX DMIC1", "MIC BIAS2", - "TX DMIC2", "MIC BIAS3", + "VA DMIC0", "VA MIC BIAS1", + "VA DMIC1", "VA MIC BIAS1", + "VA DMIC2", "VA MIC BIAS3", "TX SWR_ADC1", "ADC2_OUTPUT"; wcd-playback-dai-link { @@ -937,7 +1003,7 @@ va-dai-link { link-name = "VA Capture"; cpu { - sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; }; platform { @@ -1002,6 +1068,32 @@ status = "okay"; }; +&uart2 { + pinctrl-0 = <&uart2_default>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddio-supply = <&vreg_s10b>; + vddbtcxmx-supply = <&vreg_s12b>; + vddrfacmn-supply = <&vreg_s12b>; + vddrfa0p8-supply = <&vreg_s12b>; + vddrfa1p2-supply = <&vreg_s11b>; + vddrfa1p7-supply = <&vreg_s1c>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + &usb_0 { status = "okay"; }; @@ -1062,7 +1154,7 @@ vdd-micb-supply = <&vreg_s10b>; - qcom,dmic-sample-rate = <600000>; + qcom,dmic-sample-rate = <4800000>; status = "okay"; }; @@ -1122,6 +1214,21 @@ &tlmm { gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + bt_default: bt-default-state { + hstp-bt-en-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hstp-sw-ctrl-pins { + pins = "gpio132"; + function = "gpio"; + bias-pull-down; + }; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio25"; function = "gpio"; @@ -1132,7 +1239,6 @@ hall_int_n_default: hall-int-n-state { pins = "gpio107"; function = "gpio"; - input-enable; bias-disable; }; @@ -1289,12 +1395,40 @@ }; }; + uart2_default: uart2-default-state { + cts-pins { + pins = "gpio121"; + function = "qup2"; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio122"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio124"; + function = "qup2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio123"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + }; + usb0_sbu_default: usb0-sbu-state { oe-n-pins { pins = "gpio101"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; @@ -1311,7 +1445,7 @@ pins = "gpio48"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index df7d28f7ae60..a0ba535bb6c9 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -59,8 +59,9 @@ #size-cells = <0>; pmk8280_pon: pon@1300 { - compatible = "qcom,pm8998-pon"; - reg = <0x1300>; + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; pmk8280_pon_pwrkey: pwrkey { compatible = "qcom,pmk8350-pwrkey"; @@ -95,6 +96,24 @@ #thermal-sensor-cells = <1>; status = "disabled"; }; + + pmk8280_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + wakeup-source; + status = "disabled"; + }; + + pmk8280_sdam_6: nvram@8500 { + compatible = "qcom,spmi-sdam"; + reg = <0x8500>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8500 0x100>; + status = "disabled"; + }; }; pmc8280_1: pmic@1 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 0d02599d8867..8fa9fbfe5d00 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -43,8 +43,9 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_0>; @@ -67,8 +68,9 @@ CPU1: cpu@100 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_100>; @@ -87,8 +89,9 @@ CPU2: cpu@200 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_200>; @@ -107,8 +110,9 @@ CPU3: cpu@300 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_300>; @@ -127,8 +131,9 @@ CPU4: cpu@400 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_400>; @@ -147,8 +152,9 @@ CPU5: cpu@500 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_500>; @@ -167,8 +173,9 @@ CPU6: cpu@600 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_600>; @@ -187,8 +194,9 @@ CPU7: cpu@700 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_700>; @@ -268,7 +276,6 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c344>; entry-latency-us = <3263>; exit-latency-us = <6562>; @@ -1207,6 +1214,20 @@ status = "disabled"; }; + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + operating-points-v2 = <&qup_opp_table_100mhz>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + i2c3: i2c@98c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0098c000 0 0x4000>; @@ -1653,11 +1674,12 @@ <0x0 0x30000000 0x0 0xf1d>, <0x0 0x30000f20 0x0 0xa8>, <0x0 0x30001000 0x0 0x1000>, - <0x0 0x30100000 0x0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0x0 0x30100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x30200000 0x0 0x30200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x30200000 0x0 0x100000>, <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -1752,11 +1774,12 @@ <0x0 0x32000000 0x0 0xf1d>, <0x0 0x32000f20 0x0 0xa8>, <0x0 0x32001000 0x0 0x1000>, - <0x0 0x32100000 0x0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0x0 0x32100000 0x0 0x100000>, + <0x0 0x01c0b000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x32200000 0x0 0x32200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x32200000 0x0 0x100000>, <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -1849,11 +1872,12 @@ <0x0 0x34000000 0x0 0xf1d>, <0x0 0x34000f20 0x0 0xa8>, <0x0 0x34001000 0x0 0x1000>, - <0x0 0x34100000 0x0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0x0 0x34100000 0x0 0x100000>, + <0x0 0x01c13000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x34200000 0x0 0x34200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x34200000 0x0 0x100000>, <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -1949,11 +1973,12 @@ <0x0 0x38000000 0x0 0xf1d>, <0x0 0x38000f20 0x0 0xa8>, <0x0 0x38001000 0x0 0x1000>, - <0x0 0x38100000 0x0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0x0 0x38100000 0x0 0x100000>, + <0x0 0x01c1b000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x38200000 0x0 0x38200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x38200000 0x0 0x100000>, <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -2046,11 +2071,12 @@ <0x0 0x3c000000 0x0 0xf1d>, <0x0 0x3c000f20 0x0 0xa8>, <0x0 0x3c001000 0x0 0x1000>, - <0x0 0x3c100000 0x0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0x0 0x3c100000 0x0 0x100000>, + <0x0 0x01c23000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>, <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -2489,7 +2515,6 @@ status = "disabled"; }; - /* RX */ swr1: soundwire-controller@3210000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03210000 0 0x2000>; @@ -2504,12 +2529,12 @@ qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; - qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; - qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff>; qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; - qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff>; qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; - qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; #sound-dai-cells = <1>; #address-cells = <2>; @@ -2564,13 +2589,13 @@ status = "disabled"; }; - /* WSA */ swr0: soundwire-controller@3250000 { reg = <0 0x03250000 0 0x2000>; compatible = "qcom,soundwire-v1.6.0"; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsamacro>; clock-names = "iface"; + label = "WSA"; qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2592,15 +2617,14 @@ status = "disabled"; }; - /* TX */ swr2: soundwire-controller@3330000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03330000 0 0x2000>; - interrupts-extended = <&intc GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "core", "wake"; + interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; - clocks = <&vamacro>; + clocks = <&txmacro>; clock-names = "iface"; label = "TX"; #sound-dai-cells = <1>; @@ -2609,15 +2633,15 @@ qcom,din-ports = <4>; qcom,dout-ports = <0>; - qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03 0x03>; - qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02 0x01>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02 0x00>; qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; - qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; - qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x00>; + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x01>; status = "disabled"; }; @@ -2702,7 +2726,6 @@ pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; - input-enable; }; }; @@ -2720,7 +2743,6 @@ function = "dmic1_data"; drive-strength = <2>; bias-pull-down; - input-enable; }; }; @@ -2736,7 +2758,6 @@ pins = "gpio9"; function = "dmic2_data"; drive-strength = <8>; - input-enable; }; }; @@ -2754,7 +2775,6 @@ function = "dmic2_data"; drive-strength = <2>; bias-pull-down; - input-enable; }; }; @@ -2773,7 +2793,6 @@ drive-strength = <2>; slew-rate = <1>; bias-bus-hold; - }; }; @@ -2946,7 +2965,7 @@ }; pmu@90b6400 { - compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x090b6400 0 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; @@ -2983,8 +3002,14 @@ system-cache-controller@9200000 { compatible = "qcom,sc8280xp-llcc"; - reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>, + <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>, + <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc4_base", "llcc5_base", + "llcc6_base", "llcc7_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -3253,7 +3278,7 @@ #sound-dai-cells = <0>; operating-points-v2 = <&mdss0_dp0_opp_table>; - power-domains = <&rpmhpd SC8280XP_CX>; + power-domains = <&rpmhpd SC8280XP_MMCX>; status = "disabled"; @@ -3331,7 +3356,7 @@ #sound-dai-cells = <0>; operating-points-v2 = <&mdss0_dp1_opp_table>; - power-domains = <&rpmhpd SC8280XP_CX>; + power-domains = <&rpmhpd SC8280XP_MMCX>; status = "disabled"; @@ -4040,6 +4065,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; remoteproc_nsp0: remoteproc@1b300000 { @@ -4398,7 +4424,6 @@ required-opps = <&rpmhpd_opp_nom>; }; }; - }; mdss1_dp1: displayport-controller@22098000 { diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 7c81918eee66..7459525d9982 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -29,7 +29,7 @@ gpio-keys { compatible = "gpio-keys"; - volup { + key-volup { label = "Volume Up"; gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index e52580acd5c8..2ca713a3902a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -112,7 +112,7 @@ gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEDOWN>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 5827cda270a0..37e72b1c56dc 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -328,6 +328,25 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-131250000 { + opp-hz = /bits/ 64 <131250000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-210000000 { + opp-hz = /bits/ 64 <210000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-262500000 { + opp-hz = /bits/ 64 <262500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; @@ -1189,7 +1208,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; usb3: usb@a8f8800 { @@ -1451,25 +1469,6 @@ <0>; }; - dsi_opp_table: opp-table-dsi { - compatible = "operating-points-v2"; - - opp-131250000 { - opp-hz = /bits/ 64 <131250000>; - required-opps = <&rpmpd_opp_svs>; - }; - - opp-210000000 { - opp-hz = /bits/ 64 <210000000>; - required-opps = <&rpmpd_opp_svs_plus>; - }; - - opp-262500000 { - opp-hz = /bits/ 64 <262500000>; - required-opps = <&rpmpd_opp_nom>; - }; - }; - mdss: display-subsystem@c900000 { compatible = "qcom,mdss"; reg = <0x0c900000 0x1000>, @@ -2268,7 +2267,8 @@ }; apcs_glb: mailbox@17911000 { - compatible = "qcom,sdm660-apcs-hmss-global"; + compatible = "qcom,sdm660-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x17911000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts index e3e61b9d1b9d..32a7bd59e1ec 100644 --- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -395,7 +395,6 @@ regulator-enable-ramp-delay = <500>; }; }; - }; &gcc { diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index 02f14692dd9d..c5f839dd1c6e 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,sdm670-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -430,6 +431,10 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>; clock-names = "iface", "core", "xo", "ice", "bus"; + interconnects = <&aggre1_noc MASTER_EMMC 0 &aggre1_noc SLAVE_A1NOC_SNOC 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_EMMC_CFG 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + operating-points-v2 = <&sdhc1_opp_table>; iommus = <&apps_smmu 0x140 0xf>; @@ -442,6 +447,38 @@ non-removable; status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-20000000 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_min_svs>; + opp-peak-kBps = <80000 80000>; + opp-avg-kBps = <52286 80000>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <200000 100000>; + opp-avg-kBps = <130718 100000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <200000 130000>; + opp-avg-kBps = <130718 130000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <4096000 4096000>; + opp-avg-kBps = <1338562 1338562>; + }; + }; }; gpi_dma0: dma-controller@800000 { @@ -477,6 +514,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c0: i2c@880000 { @@ -490,6 +529,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -507,6 +550,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -524,6 +571,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -541,6 +592,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -558,6 +613,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -575,6 +634,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -592,6 +655,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -609,6 +676,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -649,6 +720,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c8: i2c@a80000 { @@ -662,6 +735,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -679,6 +756,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -696,6 +777,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -713,6 +798,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -730,6 +819,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -747,6 +840,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -764,6 +861,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, <&gpi_dma1 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -781,6 +882,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, <&gpi_dma1 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1028,6 +1133,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre2_noc MASTER_USB3 0 &mem_noc SLAVE_EBI_CH0 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + status = "disabled"; usb_1_dwc3: usb@a600000 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index f2b48241d15c..d05c511718df 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -135,11 +135,9 @@ backlight = <&backlight>; no-hpd; - ports { - panel_in: port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; }; }; }; @@ -319,8 +317,9 @@ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; flash@0 { compatible = "jedec,spi-nor"; @@ -995,16 +994,19 @@ ap_ts_i2c: &i2c14 { /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ }; &qspi_clk { - bias-disable; + bias-disable; /* Rely on Cr50 internal pulldown */ }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-disable; /* Rely on Cr50 internal pulldown */ +}; + +&qspi_data1 { + bias-pull-down; }; &qup_i2c3_default { @@ -1155,14 +1157,12 @@ ap_ts_i2c: &i2c14 { bios_flash_wp_r_l: bios-flash-wp-r-l-state { pins = "gpio128"; function = "gpio"; - input-enable; bias-disable; }; ec_ap_int_l: ec-ap-int-l-state { pins = "gpio122"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1190,7 +1190,6 @@ ap_ts_i2c: &i2c14 { h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio129"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1236,6 +1235,22 @@ ap_ts_i2c: &i2c14 { output-high; }; + qspi_sleep: qspi-sleep-state { + pins = "gpio90", "gpio91", "gpio92", "gpio95"; + + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; + sdc2_clk: sdc2-clk-state { pins = "sdc2_clk"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index d4866feef2c4..e14fe9bbb386 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -819,7 +819,6 @@ &spi2 { /* On Low speed expansion */ - label = "LS-SPI0"; status = "okay"; }; @@ -1136,10 +1135,6 @@ bias-disable; }; -&pm8998_gpios { - -}; - /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi0_default { drive-strength = <6>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 64638ea94db7..5c384345c05d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -29,6 +29,23 @@ stdout-path = "serial0:115200n8"; }; + gpio-hall-sensor { + compatible = "gpio-keys"; + label = "Hall effect sensor"; + + pinctrl-0 = <&hall_sensor_default>; + pinctrl-names = "default"; + + event-hall-sensor { + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + label = "Hall Effect Sensor"; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + gpio-keys { compatible = "gpio-keys"; label = "Volume keys"; @@ -330,8 +347,6 @@ display_panel: panel@0 { status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; vddio-supply = <&vreg_l14a_1p88>; @@ -535,6 +550,11 @@ bias-disable; }; +&slpi_pas { + firmware-name = "qcom/sdm845/oneplus6/slpi.mbn"; + status = "okay"; +}; + &sound { compatible = "qcom,sdm845-sndcard"; pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>; @@ -753,6 +773,13 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; + hall_sensor_default: hall-sensor-default-state { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tri_state_key_default: tri-state-key-default-state { pins = "gpio40", "gpio42", "gpio26"; function = "gpio"; @@ -779,7 +806,6 @@ function = "mdp_vsync"; drive-strength = <2>; bias-disable; - input-enable; }; panel_esd_pin: panel-esd-state { @@ -787,17 +813,14 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; speaker_default: speaker-default-state { - mux { - pins = "gpio69"; - function = "gpio"; - drive-strength = <16>; - bias-pull-up; - output-high; - }; + pins = "gpio69"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + output-high; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 086d14e2de92..d82c0d4407f0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -45,7 +45,6 @@ "AMIC3", "MIC BIAS4", "AMIC4", "MIC BIAS1", "AMIC5", "MIC BIAS3"; - }; /* diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index b54e304abf71..0ad891348e0c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -572,6 +572,11 @@ status = "okay"; }; +&slpi_pas { + firmware-name = "qcom/sdm845/axolotl/slpi.mbn"; + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; @@ -608,7 +613,6 @@ function = "gpio"; drive-strength = <8>; bias-pull-up; - input-enable; }; ts_int_suspend: ts-int-suspend-state { @@ -616,7 +620,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; ts_reset_active: ts-reset-active-state { diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts index 34f84f1f1eb4..d97b7f1e7140 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts @@ -11,3 +11,7 @@ model = "Sony Xperia XZ2"; compatible = "sony,akari-row", "qcom,sdm845"; }; + +&panel { + compatible = "sony,td4353-jdi-tama"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts index 2f5e12deaada..5d2052a0ff69 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -7,12 +7,57 @@ #include "sdm845-sony-xperia-tama.dtsi" +/* XZ3 uses an Atmel touchscreen instead. */ +/delete-node/ &touchscreen; + / { model = "Sony Xperia XZ3"; compatible = "sony,akatsuki-row", "qcom,sdm845"; + + /* Fixed DCDC for the OLED panel */ + ts_vddio_supply: ts-vddio-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_vddio"; + + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <1840000>; + + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ibb { + status = "disabled"; +}; + +&lab { + status = "disabled"; +}; + +&panel { + /* Akatsuki uses an OLED panel. */ + /delete-property/ backlight; + /delete-property/ vsp-supply; + /delete-property/ vsn-supply; + /delete-property/ touch-reset-gpios; +}; + +&pmi8998_wled { + status = "disabled"; +}; + +&tlmm { + ts_vddio_en: ts-vddio-en-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; }; -/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */ &vreg_l14a_1p8 { regulator-min-microvolt = <1840000>; regulator-max-microvolt = <1840000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts index c9e62c72f60e..cd056f78070f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts @@ -11,3 +11,9 @@ model = "Sony Xperia XZ2 Compact"; compatible = "sony,apollo-row", "qcom,sdm845"; }; + +&panel { + compatible = "sony,td4353-jdi-tama"; + height-mm = <112>; + width-mm = <56>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 4984c7496c31..420ffede3e80 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -98,6 +98,11 @@ }; }; +&adsp_pas { + firmware-name = "qcom/sdm845/Sony/tama/adsp.mbn"; + status = "okay"; +}; + &apps_rsc { regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; @@ -228,6 +233,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-system-load = <62000>; }; vreg_l15a_1p8: ldo15 { @@ -314,6 +320,7 @@ regulator-min-microvolt = <2856000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-system-load = <100000>; }; vreg_lvs1a_1p8: lvs1 { @@ -356,6 +363,48 @@ }; }; +&cdsp_pas { + firmware-name = "qcom/sdm845/Sony/tama/cdsp.mbn"; + status = "okay"; +}; + +&dsi0 { + vdda-supply = <&vreg_l26a_1p2>; + status = "okay"; + + panel: panel@0 { + /* The compatible is assigned in device DTs. */ + reg = <0>; + + backlight = <&pmi8998_wled>; + vddio-supply = <&vreg_l14a_1p8>; + vsp-supply = <&lab>; + vsn-supply = <&ibb>; + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vdds-supply = <&vreg_l1a_0p9>; + status = "okay"; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -364,11 +413,64 @@ <GCC_LPASS_SWAY_CLK>; }; -&i2c5 { +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; + }; +}; + +&i2c5 { clock-frequency = <400000>; + status = "okay"; + + touchscreen: touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vreg_l14a_1p8>; + /* + * This is a blatant abuse of OF, but the panel driver *needs* + * to probe first, as the power/gpio switching needs to be precisely + * timed in order for both the display and touch panel to function properly. + */ + incell-supply = <&panel>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; - /* Synaptics touchscreen @ 2c, 3c */ + pinctrl-0 = <&ts_default>; + pinctrl-1 = <&ts_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; }; &i2c10 { @@ -388,6 +490,31 @@ /* AMS TCS3490 RGB+IR color sensor @ 72 */ }; +&ibb { + qcom,discharge-resistor-kohms = <300>; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <0>; + regulator-max-microamp = <800000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&mdss { + status = "okay"; +}; + &pm8998_gpios { focus_n: focus-n-state { pins = "gpio2"; @@ -422,6 +549,16 @@ }; }; +&pmi8998_wled { + default-brightness = <800>; + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <20000>; + qcom,enabled-strings = <0 1 2 3>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -465,6 +602,59 @@ bias-pull-up; }; }; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_sleep: sde-dsi-sleep-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active_sleep: sde-te-active-sleep-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_default: ts-default-state { + reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + int-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + ts_sleep: ts-sleep-state { + reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + int-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; }; &uart6 { @@ -500,3 +690,8 @@ vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-dpdm-supply = <&vreg_l24a_3p1>; }; + +&venus { + firmware-name = "qcom/sdm845/Sony/tama/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi index 0d7c37f39176..c15d48860646 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi @@ -80,7 +80,6 @@ pins = "gpio54"; function = "gpio"; - input-enable; bias-pull-down; drive-strength = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index e0fda4d754fe..5ed975cc6ecb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -2,6 +2,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> @@ -232,9 +233,6 @@ vddpos-supply = <&lab>; vddneg-supply = <&ibb>; - #address-cells = <1>; - #size-cells = <0>; - backlight = <&pmi8998_wled>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; @@ -322,6 +320,16 @@ }; }; +&pmi8998_lpg { + status = "okay"; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + }; +}; + &pmi8998_wled { status = "okay"; qcom,current-boost-limit = <970>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts index 8e176111e599..e9427851ebaa 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts @@ -10,6 +10,6 @@ }; &display_panel { - compatible = "tianma,fhd-video"; + compatible = "tianma,fhd-video", "novatek,nt36672a"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 1b7fdbae6a2b..8ae0ffccaab2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -586,7 +586,6 @@ function = "gpio"; bias-pull-down; drive-strength = <16>; - input-enable; }; ts_reset_sleep: ts-reset-sleep-state { @@ -601,7 +600,6 @@ function = "gpio"; bias-pull-down; drive-strength = <2>; - input-enable; }; sde_dsi_active: sde-dsi-active-state { @@ -712,7 +710,5 @@ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; - - qcom,snoc-host-cap-skip-quirk; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 479859bd8ab3..90424442bb4a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> @@ -92,9 +93,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -118,9 +120,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -140,9 +143,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -162,9 +166,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -184,6 +189,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -206,6 +212,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -228,6 +235,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -250,6 +258,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -331,12 +340,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -870,6 +877,14 @@ size = <0 0x4000>; no-map; }; + + fastrpc_mem: fastrpc { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; + alignment = <0x0 0x400000>; + size = <0x0 0x1000000>; + reusable; + }; }; adsp_pas: remoteproc-adsp { @@ -2192,8 +2207,11 @@ llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; - reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>, + <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>, + <0 0x01300000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -2241,7 +2259,7 @@ }; pmu@1436400 { - compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x01436400 0 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; @@ -2282,8 +2300,9 @@ reg = <0 0x01c00000 0 0x2000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, - <0 0x60100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "config"; + <0 0x60100000 0 0x100000>, + <0 0x01c07000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "config", "mhi"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; @@ -2292,8 +2311,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -2319,7 +2338,6 @@ "slave_q2a", "tbu"; - iommus = <&apps_smmu 0x1c10 0xf>; iommu-map = <0x0 &apps_smmu 0x1c10 0x1>, <0x100 &apps_smmu 0x1c11 0x1>, <0x200 &apps_smmu 0x1c12 0x1>, @@ -2387,8 +2405,9 @@ reg = <0 0x01c08000 0 0x2000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, - <0 0x40100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "config"; + <0 0x40100000 0 0x100000>, + <0 0x01c0c000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "config", "mhi"; device_type = "pci"; linux,pci-domain = <1>; bus-range = <0x00 0xff>; @@ -2397,7 +2416,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; @@ -2429,7 +2448,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1c00 0xf>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>, <0x200 &apps_smmu 0x1c02 0x1>, @@ -2617,7 +2635,7 @@ }; cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.0"; + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0 0x01dc4000 0 0x24000>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rpmhcc RPMH_CE_CLK>; @@ -2758,12 +2776,17 @@ function = "qspi_cs"; }; - qspi_data01: qspi-data01-state { - pins = "gpio91", "gpio92"; + qspi_data0: qspi-data0-state { + pins = "gpio91"; function = "qspi_data"; }; - qspi_data12: qspi-data12-state { + qspi_data1: qspi-data1-state { + pins = "gpio92"; + function = "qspi_data"; + }; + + qspi_data23: qspi-data23-state { pins = "gpio93", "gpio94"; function = "qspi_data"; }; @@ -3163,7 +3186,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_active: quat-mi2s-active-state { @@ -3179,7 +3201,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd0_active: quat-mi2s-sd0-active-state { @@ -3194,7 +3215,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd1_active: quat-mi2s-sd1-active-state { @@ -3209,7 +3229,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd2_active: quat-mi2s-sd2-active-state { @@ -3224,7 +3243,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd3_active: quat-mi2s-sd3-active-state { @@ -3314,6 +3332,59 @@ "gcc_gpu_gpll0_div_clk_src"; }; + slpi_pas: remoteproc@5c00000 { + compatible = "qcom,sdm845-slpi-pas"; + reg = <0 0x5c00000 0 0x4000>; + + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + qcom,qmp = <&aoss_qmp>; + + power-domains = <&rpmhpd SDM845_CX>, + <&rpmhpd SDM845_MX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA + QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>; + memory-region = <&fastrpc_mem>; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@0 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <0>; + }; + }; + }; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, @@ -4924,7 +4995,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sram@146bf000 { @@ -5222,7 +5292,7 @@ }; cpufreq_hw: cpufreq@17d43000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; @@ -5232,6 +5302,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; wifi: wifi@18800000 { diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 67d2a663ce75..1326c171fe72 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -606,7 +606,6 @@ pins = "gpio37"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -615,7 +614,6 @@ pins = "gpio125"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -624,7 +622,6 @@ pins = "gpio92"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -633,7 +630,6 @@ pins = "gpio124"; function = "gpio"; - input-enable; bias-disable; }; @@ -641,7 +637,6 @@ pins = "gpio95"; function = "gpio"; - input-enable; bias-disable; }; }; @@ -753,7 +748,7 @@ left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; @@ -761,7 +756,7 @@ right_spkr: speaker@0,4 { compatible = "sdw10217211000"; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; reg = <0 4>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index 9850140514ba..41f59e32af64 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -662,7 +662,7 @@ left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; @@ -670,7 +670,7 @@ right_spkr: speaker@0,4 { compatible = "sdw10217211000"; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; reg = <0 4>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index a3f1c7c41fd7..a1f0622db5a0 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -202,12 +202,22 @@ vqmmc-supply = <&vreg_l5a>; cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>; status = "okay"; }; &tlmm { gpio-reserved-ranges = <14 4>; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &ufs_mem_hc { @@ -225,11 +235,16 @@ status = "okay"; }; -&usb_1 { +&usb { status = "okay"; }; -&usb_1_hsphy { +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { vdd-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l12a>; vdda-phy-dpdm-supply = <&vreg_l15a>; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 4d6ec815b78b..631ca327e064 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -5,8 +5,10 @@ #include <dt-bindings/clock/qcom,gcc-sm6115.h> #include <dt-bindings/clock/qcom,sm6115-dispcc.h> +#include <dt-bindings/clock/qcom,sm6115-gpucc.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -39,6 +41,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -54,6 +57,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -65,6 +69,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -76,6 +81,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -87,6 +93,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; @@ -102,6 +109,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x101>; + clocks = <&cpufreq_hw 1>; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; enable-method = "psci"; @@ -113,6 +121,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x102>; + clocks = <&cpufreq_hw 1>; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; enable-method = "psci"; @@ -124,6 +133,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x103>; + clocks = <&cpufreq_hw 1>; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; enable-method = "psci"; @@ -281,6 +291,15 @@ reg = <0x0 0x60000000 0x0 0x3900000>; no-map; }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; }; rpm-glink { @@ -595,13 +614,6 @@ bias-pull-up; drive-strength = <10>; }; - - sd-cd-pins { - pins = "gpio88"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; }; sdc2_state_off: sdc2-off-state { @@ -622,13 +634,6 @@ bias-pull-up; drive-strength = <2>; }; - - sd-cd-pins { - pins = "gpio88"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - }; }; }; @@ -642,7 +647,7 @@ #power-domain-cells = <1>; }; - usb_1_hsphy: phy@1613000 { + usb_hsphy: phy@1613000 { compatible = "qcom,sm6115-qusb2-phy"; reg = <0x0 0x01613000 0x0 0x180>; #phy-cells = <0>; @@ -731,10 +736,6 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; - pinctrl-0 = <&sdc1_state_on>; - pinctrl-1 = <&sdc1_state_off>; - pinctrl-names = "default", "sleep"; - bus-width = <8>; status = "disabled"; }; @@ -753,10 +754,6 @@ <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; - pinctrl-0 = <&sdc2_state_on>; - pinctrl-1 = <&sdc2_state_off>; - pinctrl-names = "default", "sleep"; - power-domains = <&rpmpd SM6115_VDDCX>; operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0x00a0 0x0>; @@ -1078,10 +1075,11 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; }; - usb_1: usb@4ef8800 { + usb: usb@4ef8800 { compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; reg = <0x0 0x04ef8800 0x0 0x400>; #address-cells = <2>; @@ -1109,11 +1107,11 @@ qcom,select-utmi-as-pipe-clk; status = "disabled"; - usb_1_dwc3: usb@4e00000 { + usb_dwc3: usb@4e00000 { compatible = "snps,dwc3"; reg = <0x0 0x04e00000 0x0 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_1_hsphy>; + phys = <&usb_hsphy>; phy-names = "usb2-phy"; iommus = <&apps_smmu 0x120 0x0>; snps,dis_u2_susphy_quirk; @@ -1121,11 +1119,46 @@ snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; - maximum-speed = "high-speed"; - dr_mode = "peripheral"; }; }; + gpucc: clock-controller@5990000 { + compatible = "qcom,sm6115-gpucc"; + reg = <0x0 0x05990000 0x0 0x9000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@59a0000 { + compatible = "qcom,sm6115-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x059a0000 0x0 0x10000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "mem", + "hlos", + "iface"; + power-domains = <&gpucc GPU_CX_GDSC>; + + #global-interrupts = <1>; + #iommu-cells = <2>; + }; + mdss: display-subsystem@5e00000 { compatible = "qcom,sm6115-mdss"; reg = <0x0 0x05e00000 0x0 0x1000>; @@ -1218,7 +1251,7 @@ }; mdss_dsi0: dsi@5e94000 { - compatible = "qcom,dsi-ctrl-6g-qcm2290"; + compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0 0x05e94000 0x0 0x400>; reg-names = "dsi_ctrl"; @@ -1322,6 +1355,39 @@ #power-domain-cells = <1>; }; + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + stm@8002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x0 0x08002000 0x0 0x1000>, @@ -1934,6 +2000,157 @@ }; }; + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDD_LPI_CX>, + <&rpmpd SM6115_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x01c3 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x01c4 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x01c5 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x01c6 0x0>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x01c7 0x0>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@b300000 { + compatible = "qcom,sm6115-cdsp-pas"; + reg = <0x0 0x0b300000 0x0 0x100000>; + + interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + + memory-region = <&pil_cdsp_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 28>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0c01 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0c02 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0c03 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x0c04 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x0c05 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x0c06 0x0>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x0c600000 0x0 0x80000>; @@ -2037,7 +2254,8 @@ }; apcs_glb: mailbox@f111000 { - compatible = "qcom,sm6115-apcs-hmss-global"; + compatible = "qcom,sm6115-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x0 0x0f111000 0x0 0x1000>; #mbox-cells = <1>; @@ -2114,7 +2332,7 @@ }; cpufreq_hw: cpufreq@f521000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm6115-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0x0 0x0f521000 0x0 0x1000>, <0x0 0x0f523000 0x0 0x1000>; @@ -2123,6 +2341,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index 4ce2d905d70e..ea3340d31110 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -49,7 +49,18 @@ gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; + }; + }; + + reserved-memory { + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + ftrace-size = <0x20000>; + ecc-size = <16>; }; }; }; @@ -78,6 +89,21 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/sm6115/LENOVO/J606F/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm6115/LENOVO/J606F/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm6115/LENOVO/J606F/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; @@ -273,17 +299,31 @@ status = "okay"; }; -&usb_1 { +&usb { status = "okay"; }; -&usb_1_hsphy { +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { vdd-supply = <&pm6125_l4>; vdda-pll-supply = <&pm6125_l12>; vdda-phy-dpdm-supply = <&pm6125_l15>; status = "okay"; }; +&wifi { + vdd-0.8-cx-mx-supply = <&pm6125_l8>; + vdd-1.8-xo-supply = <&pm6125_l16>; + vdd-1.3-rfa-supply = <&pm6125_l17>; + vdd-3.3-ch0-supply = <&pm6125_l23>; + qcom,ath10k-calibration-variant = "Lenovo_P11"; + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index b22b3f9a910d..9f8a9ef398a2 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -468,7 +468,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts new file mode 100644 index 000000000000..b1038eb8cebc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Lux Aliaga <they@mint.lgbt> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "sm6125.dtsi" +#include "pm6125.dtsi" + +/ { + model = "Xiaomi Mi A3"; + compatible = "xiaomi,laurel-sprout", "qcom,sm6125"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <394 0>; /* sm6125 v1 */ + qcom,board-id = <11 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (1560 * 720 * 4)>; + width = <720>; + height = <1560>; + stride = <(720 * 4)>; + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + debug_mem: debug@ffb00000 { + reg = <0x0 0xffb00000 0x0 0xc0000>; + no-map; + }; + + last_log_mem: lastlog@ffbc0000 { + reg = <0x0 0xffbc0000 0x0 0x80000>; + no-map; + }; + + pstore_mem: ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc40000 0x0 0xc0000>; + record-size = <0x1000>; + console-size = <0x40000>; + msg-size = <0x20000 0x20000>; + }; + + cmdline_mem: memory@ffd00000 { + reg = <0x0 0xffd40000 0x0 0x1000>; + no-map; + }; + }; + + extcon_usb: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + thermal-zones { + rf-pa0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <5000>; + thermal-sensors = <&pm6125_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; + +&hsusb_phy1 { + vdd-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&pm6125_adc { + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; + + adc-chan@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "rf_pa0_therm"; + }; + + adc-chan@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "quiet_therm"; + }; + + adc-chan@52 { + reg = <ADC5_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "camera_flash_therm"; + }; + + adc-chan@54 { + reg = <ADC5_GPIO3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "emmc_ufs_therm"; + }; +}; + +&pm6125_adc_tm { + status = "okay"; + + rf-pa0-therm@0 { + reg = <0>; + io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + xo-therm@2 { + reg = <2>; + io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6125_gpios { + camera_flash_therm: camera-flash-therm-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + emmc_ufs_therm: emmc-ufs-therm-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + vreg_l2a: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + vreg_l3a: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + regulator-allow-set-load; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-allow-set-load; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + regulator-allow-set-load; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <22 2>, <28 6>; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l24a>; + vccq2-supply = <&vreg_l11a>; + vcc-max-microamp = <600000>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14200>; + vddp-ref-clk-supply = <&vreg_l18a>; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + extcon = <&extcon_usb>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 65033227718a..9484752fb850 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -737,6 +737,70 @@ status = "disabled"; }; + ufs_mem_hc: ufs@4804000 { + compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x04804000 0x3000>, <0x04810000 0x8000>; + reg-names = "std", "ice"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "ice_core_clk"; + freq-table-hz = <50000000 240000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <75000000 300000000>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + #reset-cells = <1>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + lanes-per-direction = <1>; + + iommus = <&apps_smmu 0x200 0x0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@4807000 { + compatible = "qcom,sm6125-qmp-ufs-phy"; + reg = <0x04807000 0xdb8>; + + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", + "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + #phy-cells = <0>; + + status = "disabled"; + }; + gpi_dma0: dma-controller@4a00000 { compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0x04a00000 0x60000>; @@ -1134,7 +1198,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; apps_smmu: iommu@c600000 { @@ -1211,7 +1274,8 @@ }; apcs_glb: mailbox@f111000 { - compatible = "qcom,sm6125-apcs-hmss-global"; + compatible = "qcom,sm6125-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x0f111000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 4916d0db5b47..dddd6e44d280 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -233,7 +233,6 @@ regulator-allow-set-load; regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; - }; pm6150l_l7: ldo7 { @@ -255,7 +254,6 @@ regulator-allow-set-load; regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; - }; pm6150l_l10: ldo10 { @@ -369,7 +367,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 1e1d366c92c1..18c4616848ce 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -46,6 +46,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -71,6 +72,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -92,6 +94,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -113,6 +116,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -134,6 +138,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -155,6 +160,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -170,13 +176,13 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1894>; dynamic-power-coefficient = <703>; @@ -198,6 +204,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1894>; dynamic-power-coefficient = <703>; @@ -880,7 +887,6 @@ interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; - }; config_noc: interconnect@1500000 { @@ -1348,7 +1354,7 @@ system-cache-controller@9200000 { compatible = "qcom,sm6350-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg-names = "llcc0_base", "llcc_broadcast_base"; }; gem_noc: interconnect@9680000 { @@ -1995,13 +2001,14 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm6350-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>; reg-names = "freq-domain0", "freq-domain1"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts index b691c3834b6b..8220e6f44117 100644 --- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts @@ -46,6 +46,23 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&vol_down_n>; + pinctrl-names = "default"; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + reserved-memory { cont_splash_mem: memory@85200000 { reg = <0 0x85200000 0 0xc00000>; @@ -133,6 +150,16 @@ status = "okay"; }; +&pmr735a_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + &pon_pwrkey { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 31b88c738510..ae9b6bc446cb 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,sm6375-gcc.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -39,6 +40,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -58,6 +60,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -74,6 +77,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -90,6 +94,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -106,6 +111,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -122,6 +128,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -132,13 +139,13 @@ compatible = "cache"; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -155,6 +162,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -208,6 +216,16 @@ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { compatible = "arm,idle-state"; + idle-state-name = "silver-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; idle-state-name = "silver-rail-power-collapse"; arm,psci-suspend-param = <0x40000004>; entry-latency-us = <702>; @@ -218,6 +236,16 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; + idle-state-name = "gold-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; idle-state-name = "gold-rail-power-collapse"; arm,psci-suspend-param = <0x40000004>; entry-latency-us = <526>; @@ -230,12 +258,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x41000044>; entry-latency-us = <2752>; exit-latency-us = <3048>; min-residency-us = <6118>; - local-timer-stop; }; }; }; @@ -267,49 +293,49 @@ CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; }; CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; }; CLUSTER_PD: power-domain-cpu-cluster0 { @@ -424,6 +450,15 @@ no-map; }; + rmtfs_mem: rmtfs@f3900000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf3900000 0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; + debug_mem: debug@ffb00000 { reg = <0 0xffb00000 0 0xc0000>; no-map; @@ -555,6 +590,47 @@ }; }; + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -713,11 +789,38 @@ #interrupt-cells = <4>; }; + tsens0: thermal-sensor@4411000 { + compatible = "qcom,sm6375-tsens", "qcom,tsens-v2"; + reg = <0 0x04411000 0 0x140>, /* TM */ + <0 0x04410000 0 0x20>; /* SROT */ + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + #qcom,sensors = <15>; + }; + + tsens1: thermal-sensor@4413000 { + compatible = "qcom,sm6375-tsens", "qcom,tsens-v2"; + reg = <0 0x04413000 0 0x140>, /* TM */ + <0 0x04412000 0 0x20>; /* SROT */ + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + #qcom,sensors = <11>; + }; + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0 0x045f0000 0 0x7000>; }; + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0 0x04690000 0 0x400>; + }; + sdhc_2: mmc@4784000 { compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x04784000 0 0x1000>; @@ -1155,6 +1258,47 @@ }; }; + remoteproc_mss: remoteproc@6000000 { + compatible = "qcom,sm6375-mpss-pas"; + reg = <0 0x06000000 0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6375_VDDCX>; + power-domain-names = "cx"; + + memory-region = <&pil_mpss_wlan_mem>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + remoteproc_adsp: remoteproc@a400000 { compatible = "qcom,sm6375-adsp-pas"; reg = <0 0x0a400000 0 0x100>; @@ -1209,6 +1353,7 @@ clock-names = "xo"; power-domains = <&rpmpd SM6375_VDDCX>; + power-domain-names = "cx"; memory-region = <&pil_cdsp_mem>; @@ -1228,6 +1373,20 @@ }; }; + sram@c125000 { + compatible = "qcom,sm6375-imem", "syscon", "simple-mfd"; + reg = <0 0x0c125000 0 0x1000>; + ranges = <0 0 0x0c125000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6375-smmu-500", "arm,mmu-500"; reg = <0 0x0c600000 0 0x100000>; @@ -1304,6 +1463,28 @@ #iommu-cells = <2>; }; + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x0c800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&pil_wlan_mem>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x80 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; reg = <0x0 0x0f200000 0x0 0x10000>, /* GICD */ @@ -1372,6 +1553,15 @@ }; }; + cpucp_l3: interconnect@fd90000 { + compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3"; + reg = <0 0x0fd90000 0 0x1000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + cpufreq_hw: cpufreq@fd91000 { compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss"; reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>; @@ -1383,6 +1573,711 @@ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1"; #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + thermal-zones { + mapss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + mapss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss0_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-unk0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu_unk0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-unk1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu_unk1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 13>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 14>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mapss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + mapss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss1_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cwlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + cwlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cwlan_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cwlan_crit: cwlan-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + audio-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + audio_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + audio_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + audio_crit: audio-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr_crit: ddr-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + q6hvx-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + q6hvx_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + q6hvx_crit: q6hvx-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_crit: camera-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm-core0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + mdm_core0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core0_crit: mdm-core0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm-core1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + mdm_core1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core1_crit: mdm-core1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm-vec-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + mdm_vec_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_vec_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_vec_crit: mdm-vec-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + msm-scl-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + msm_scl_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + msm_scl_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + msm_scl_crit: msm-scl-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 8f014a232526..c0200e7f3f74 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -359,6 +359,11 @@ }; &gpu { + /* + * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it + * after display support is added on this board. + */ + compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index 69024f7c7f10..b039773c4465 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -479,7 +479,6 @@ pins = "gpio42"; function = "gpio"; bias-pull-up; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index eff995a07ab7..34ec84916bdd 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -354,6 +354,11 @@ }; &gpu { + /* + * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it + * after display support is added on this board. + */ + compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index ff77cc3c879a..47e2430991ca 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -59,7 +59,7 @@ gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; key-camera-snapshot { @@ -68,7 +68,7 @@ gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; key-vol-down { @@ -77,7 +77,7 @@ gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index fd20096cfc6e..2273fa571988 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -48,6 +48,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -74,6 +75,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -90,13 +92,13 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU2: cpu@200 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -119,6 +121,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -141,6 +144,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -163,6 +167,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -185,6 +190,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -207,6 +213,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <421>; @@ -288,12 +295,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -945,6 +950,17 @@ status = "disabled"; }; + qfprom: efuse@784000 { + compatible = "qcom,sm8150-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; + }; qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; @@ -1334,6 +1350,20 @@ status = "disabled"; }; + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a84000 0x0 0x4000>; + reg-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart9_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c10: i2c@a88000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a88000 0 0x4000>; @@ -1772,8 +1802,11 @@ system-cache-controller@9200000 { compatible = "qcom,sm8150-llcc"; - reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, + <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, + <0 0x09600000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -1799,8 +1832,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1826,7 +1859,6 @@ "slave_q2a", "tbu"; - iommus = <&apps_smmu 0x1d80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, <0x100 &apps_smmu 0x1d81 0x1>; @@ -1895,7 +1927,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; @@ -1925,7 +1957,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1e00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, <0x100 &apps_smmu 0x1e01 0x1>; @@ -2133,15 +2164,7 @@ }; gpu: gpu@2c00000 { - /* - * note: the amd,imageon compatible makes it possible - * to use the drm/msm driver without the display node, - * make sure to remove it when display node is added - */ - compatible = "qcom,adreno-640.1", - "qcom,adreno", - "amd,imageon"; - + compatible = "qcom,adreno-640.1", "qcom,adreno"; reg = <0 0x02c00000 0 0x40000>; reg-names = "kgsl_3d0_reg_memory"; @@ -2153,44 +2176,52 @@ qcom,gmu = <&gmu>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + status = "disabled"; zap-shader { memory-region = <&gpu_mem>; }; - /* note: downstream checks gpu binning for 675 Mhz */ gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-675000000 { opp-hz = /bits/ 64 <675000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-supported-hw = <0x2>; }; opp-585000000 { opp-hz = /bits/ 64 <585000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-supported-hw = <0x3>; }; opp-499200000 { opp-hz = /bits/ 64 <499200000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-supported-hw = <0x3>; }; opp-427000000 { opp-hz = /bits/ 64 <427000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0x3>; }; opp-345000000 { opp-hz = /bits/ 64 <345000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0x3>; }; opp-257000000 { opp-hz = /bits/ 64 <257000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0x3>; }; }; }; @@ -2249,7 +2280,8 @@ }; adreno_smmu: iommu@2ca0000 { - compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x02ca0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <1>; @@ -2425,6 +2457,13 @@ bias-disable; }; + qup_uart9_default: qup-uart9-default-state { + pins = "gpio41", "gpio42"; + function = "qup9"; + drive-strength = <2>; + bias-disable; + }; + qup_i2c10_default: qup-i2c10-default-state { pins = "gpio9", "gpio10"; function = "qup10"; @@ -3935,7 +3974,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; apps_smmu: iommu@15000000 { @@ -4097,7 +4135,8 @@ }; apss_shared: mailbox@17c00000 { - compatible = "qcom,sm8150-apss-shared"; + compatible = "qcom,sm8150-apss-shared", + "qcom,sdm845-apss-shared"; reg = <0x0 0x17c00000 0x0 0x1000>; #mbox-cells = <1>; }; @@ -4263,7 +4302,7 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>, <0 0x18327800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1", @@ -4273,6 +4312,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; lmh_cluster1: lmh@18350800 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index e54cdc8bc31f..4c9de236676d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -764,7 +764,7 @@ left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; @@ -773,7 +773,7 @@ right_spkr: speaker@0,4 { compatible = "sdw10217211000"; reg = <0 4>; - powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; #sound-dai-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index 5ecf7dafb2ec..01fe3974ee72 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -26,7 +26,7 @@ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index b9c982a059df..2f22d348d45d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -63,7 +63,7 @@ gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; @@ -625,7 +625,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; ap2mdm_default: ap2mdm-default-state { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts new file mode 100644 index 000000000000..8b2ae39950ff --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +/dts-v1/; + +#include "sm8250-xiaomi-elish-common.dtsi" + +/ { + model = "Xiaomi Mi Pad 5 Pro (BOE)"; + compatible = "xiaomi,elish", "qcom,sm8250"; +}; + +&display_panel { + compatible = "xiaomi,elish-boe-nt36523"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index acaa99c5ff8b..8af6a0120a50 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -3,9 +3,8 @@ * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com> */ -/dts-v1/; - #include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8250.dtsi" #include "pm8150.dtsi" @@ -24,8 +23,6 @@ /delete-node/ &xbl_aop_mem; / { - model = "Xiaomi Mi Pad 5 Pro"; - compatible = "xiaomi,elish", "qcom,sm8250"; classis-type = "tablet"; /* required for bootloader to select correct board */ @@ -95,7 +92,7 @@ linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; @@ -473,6 +470,76 @@ status = "okay"; }; +&dsi0 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + qcom,master-dsi; + status = "okay"; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p88>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + + panel_in_1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_0>; +}; + +&dsi0_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + +&dsi1 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + status = "okay"; +}; + +&dsi1_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_1>; +}; + +&dsi1_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + &gmu { status = "okay"; }; @@ -537,6 +604,10 @@ }; }; +&mdss { + status = "okay"; +}; + &pcie0 { status = "okay"; }; @@ -595,7 +666,7 @@ &usb_1_dwc3 { dr_mode = "peripheral"; - maximum-spped = "high-speed"; + maximum-speed = "high-speed"; /* Remove USB3 phy */ phys = <&usb_1_hsphy>; phy-names = "usb2-phy"; @@ -625,6 +696,6 @@ }; &venus { - firmware-name = "qcom/sm8250/elish/venus.mbn"; + firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts new file mode 100644 index 000000000000..a4d5341495cf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +/dts-v1/; + +#include "sm8250-xiaomi-elish-common.dtsi" + +/ { + model = "Xiaomi Mi Pad 5 Pro (CSOT)"; + compatible = "xiaomi,elish", "qcom,sm8250"; +}; + +&display_panel { + compatible = "xiaomi,elish-csot-nt36523"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 2f0e460acccd..7bea916900e2 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -97,6 +97,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -127,6 +128,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -151,6 +153,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -175,6 +178,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -199,6 +203,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -223,6 +228,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -241,13 +247,13 @@ cache-unified; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -272,6 +278,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <444>; @@ -355,12 +362,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-llcc-off"; arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3264>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -955,6 +960,18 @@ #mbox-cells = <2>; }; + qfprom: efuse@784000 { + compatible = "qcom,sm8250-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@19b { + reg = <0x19b 0x1>; + bits = <5 3>; + }; + }; + rng: rng@793000 { compatible = "qcom,prng-ee"; reg = <0 0x00793000 0 0x1000>; @@ -1824,8 +1841,9 @@ <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, <0 0x60001000 0 0x1000>, - <0 0x60100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0 0x60100000 0 0x100000>, + <0 0x01c03000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; @@ -1834,8 +1852,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -1871,7 +1889,6 @@ "tbu", "ddrss_sf_tbu"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1933,8 +1950,9 @@ <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, <0 0x40001000 0 0x1000>, - <0 0x40100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0 0x40100000 0 0x100000>, + <0 0x01c0b000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <1>; bus-range = <0x00 0xff>; @@ -1943,7 +1961,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; @@ -1977,7 +1995,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -2041,8 +2058,9 @@ <0 0x64000000 0 0xf1d>, <0 0x64000f20 0 0xa8>, <0 0x64001000 0 0x1000>, - <0 0x64100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0 0x64100000 0 0x100000>, + <0 0x01c13000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <2>; bus-range = <0x00 0xff>; @@ -2051,7 +2069,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>, <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; @@ -2085,7 +2103,6 @@ assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1d00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, <0x100 &apps_smmu 0x1d01 0x1>; @@ -2359,7 +2376,7 @@ swr2: soundwire-controller@3230000 { reg = <0 0x03230000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; - interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core"; status = "disabled"; @@ -2420,7 +2437,6 @@ drive-strength = <2>; slew-rate = <1>; bias-bus-hold; - }; }; @@ -2429,7 +2445,6 @@ pins = "gpio10"; function = "wsa_swr_clk"; drive-strength = <2>; - input-enable; bias-pull-down; }; @@ -2437,9 +2452,7 @@ pins = "gpio11"; function = "wsa_swr_data"; drive-strength = <2>; - input-enable; bias-pull-down; - }; }; @@ -2454,7 +2467,6 @@ pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; - input-enable; }; }; @@ -2472,7 +2484,6 @@ function = "dmic1_data"; drive-strength = <2>; bias-pull-down; - input-enable; }; }; @@ -2517,7 +2528,6 @@ pins = "gpio0"; function = "swr_tx_clk"; drive-strength = <2>; - input-enable; bias-pull-down; }; @@ -2525,7 +2535,6 @@ pins = "gpio1"; function = "swr_tx_data"; drive-strength = <2>; - input-enable; bias-bus-hold; }; @@ -2533,7 +2542,6 @@ pins = "gpio2"; function = "swr_tx_data"; drive-strength = <2>; - input-enable; bias-pull-down; }; }; @@ -2554,49 +2562,58 @@ qcom,gmu = <&gmu>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + status = "disabled"; zap-shader { memory-region = <&gpu_mem>; }; - /* note: downstream checks gpu binning for 670 Mhz */ gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-670000000 { opp-hz = /bits/ 64 <670000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-supported-hw = <0xa>; }; opp-587000000 { opp-hz = /bits/ 64 <587000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-supported-hw = <0xb>; }; opp-525000000 { opp-hz = /bits/ 64 <525000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-supported-hw = <0xf>; }; opp-490000000 { opp-hz = /bits/ 64 <490000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0xf>; }; opp-441600000 { opp-hz = /bits/ 64 <441600000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + opp-supported-hw = <0xf>; }; opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0xf>; }; opp-305000000 { opp-hz = /bits/ 64 <305000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0xf>; }; }; }; @@ -2656,7 +2673,8 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2763,6 +2781,73 @@ }; }; + tpda@6004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0 0x06004000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tpda_out_funnel_qatb: endpoint { + remote-endpoint = <&funnel_qatb_in_tpda>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@9 { + reg = <9>; + tpda_9_in_tpdm_mm: endpoint { + remote-endpoint = <&tpdm_mm_out_tpda9>; + }; + }; + + port@17 { + reg = <23>; + tpda_23_in_tpdm_prng: endpoint { + remote-endpoint = <&tpdm_prng_out_tpda_23>; + }; + }; + }; + }; + + funnel@6005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06005000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_qatb_out_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_in_funnel_qatb>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_qatb_in_tpda: endpoint { + remote-endpoint = <&tpda_out_funnel_qatb>; + }; + }; + }; + }; + funnel@6041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06041000 0 0x1000>; @@ -2782,6 +2867,13 @@ #address-cells = <1>; #size-cells = <0>; + port@6 { + reg = <6>; + funnel_in0_in_funnel_qatb: endpoint { + remote-endpoint = <&funnel_qatb_out_funnel_in0>; + }; + }; + port@7 { reg = <7>; funnel0_in7: endpoint { @@ -2799,11 +2891,7 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + port { funnel_in1_out_funnel_merg: endpoint { remote-endpoint = <&funnel_merg_in_funnel_in1>; }; @@ -2899,12 +2987,27 @@ }; }; + tpdm@684c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0 0x0684c000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_prng_out_tpda_23: endpoint { + remote-endpoint = <&tpda_23_in_tpdm_prng>; + }; + }; + }; + }; + funnel@6b04000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; arm,primecell-periphid = <0x000bb908>; reg = <0 0x06b04000 0 0x1000>; - reg-names = "funnel-base"; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -2928,7 +3031,6 @@ }; }; }; - }; etf@6b05000 { @@ -2983,6 +3085,80 @@ }; }; + tpdm@6c08000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0 0x06c08000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_mm_out_funnel_dl_mm: endpoint { + remote-endpoint = <&funnel_dl_mm_in_tpdm_mm>; + }; + }; + }; + }; + + funnel@6c0b000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06c0b000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_dl_mm_out_funnel_dl_center: endpoint { + remote-endpoint = <&funnel_dl_center_in_funnel_dl_mm>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + funnel_dl_mm_in_tpdm_mm: endpoint { + remote-endpoint = <&tpdm_mm_out_funnel_dl_mm>; + }; + }; + }; + }; + + funnel@6c2d000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06c2d000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + port { + tpdm_mm_out_tpda9: endpoint { + remote-endpoint = <&tpda_9_in_tpdm_mm>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + funnel_dl_center_in_funnel_dl_mm: endpoint { + remote-endpoint = <&funnel_dl_mm_out_funnel_dl_center>; + }; + }; + }; + }; + etm@7040000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07040000 0 0x1000>; @@ -3220,9 +3396,6 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; - port { funnel_apss_merg_out_funnel_in1: endpoint { remote-endpoint = <&funnel_in1_in_funnel_apss_merg>; @@ -3559,8 +3732,11 @@ system-cache-controller@9200000 { compatible = "qcom,sm8250-llcc"; - reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, + <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, + <0 0x09600000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; }; usb_2: usb@a8f8800 { @@ -5481,6 +5657,7 @@ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 09baf6959c71..2ee1b121686a 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -31,6 +31,40 @@ }; }; + pmic-glink { + compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -644,7 +678,6 @@ bias-pull-up; }; }; - }; &uart2 { @@ -674,8 +707,16 @@ }; &usb_1_dwc3 { - /* TODO: Define USB-C connector properly */ - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts index b536ae36ae6d..3bd5e57cbcda 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts @@ -341,6 +341,9 @@ &usb_1 { status = "okay"; +}; + +&usb_1_dwc3 { dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index 89382ad73133..7ae1eb0a7cce 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -877,7 +877,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; sdc2_card_det_active: sd-card-det-active-state { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 1c97e28da6ad..ebcb481571c2 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> @@ -49,6 +50,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -70,6 +72,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -87,6 +90,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -104,6 +108,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -121,6 +126,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -138,6 +144,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -149,13 +156,13 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -173,6 +180,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; @@ -249,12 +257,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c344>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -653,7 +659,7 @@ <&ufs_mem_phy_lanes 0>, <&ufs_mem_phy_lanes 1>, <&ufs_mem_phy_lanes 2>, - <0>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>; }; @@ -1487,8 +1493,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -1526,7 +1532,6 @@ "aggre1", "aggre0"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1581,8 +1586,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1610,7 +1615,6 @@ "ddrss_sf_tbu", "aggre1"; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -1664,6 +1668,7 @@ power-domains = <&gcc UFS_PHY_GDSC>; iommus = <&apps_smmu 0xe0 0x0>; + dma-coherent; clock-names = "core_clk", @@ -1907,7 +1912,8 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x20000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2125,37 +2131,24 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8350-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8350-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; }; usb_2_qmpphy: phy-wrapper@88eb000 { @@ -2204,8 +2197,11 @@ system-cache-controller@9200000 { compatible = "qcom,sm8350-llcc"; - reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; }; compute_noc: interconnect@a0c0000 { @@ -2258,8 +2254,27 @@ iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -2417,6 +2432,85 @@ remote-endpoint = <&mdss_dsi1_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp_in>; + }; + }; + }; + }; + + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; }; }; @@ -2623,8 +2717,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, - <0>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", @@ -3240,6 +3334,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; cdsp: remoteproc@98900000 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index feef3837e4cd..e931545a2cac 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -25,7 +25,7 @@ }; wcd938x: audio-codec { - compatible = "qcom,wcd9380-codec"; + compatible = "qcom,wcd9385-codec"; pinctrl-names = "default"; pinctrl-0 = <&wcd_default>; @@ -87,6 +87,40 @@ enable-active-high; }; + pmic-glink { + compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -343,7 +377,6 @@ regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - }; regulators-3 { @@ -724,7 +757,16 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { @@ -755,7 +797,7 @@ spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio1"; function = "gpio"; - drive-strength = <4>; + drive-strength = <16>; bias-disable; output-low; }; @@ -763,14 +805,16 @@ spkr_2_sd_n_active: spkr-2-sd-n-active-state { pins = "gpio89"; function = "gpio"; - drive-strength = <4>; + drive-strength = <16>; bias-disable; output-low; }; - wcd_default: wcd-default-state { + wcd_default: wcd-reset-n-active-state { pins = "gpio43"; function = "gpio"; + drive-strength = <16>; bias-disable; + output-low; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index f7592946c783..65a94dfaf5ae 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -282,7 +282,6 @@ regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - }; regulators-3 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi index 67538b5a557e..001fb2723fbb 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi @@ -754,7 +754,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; telec_pwr_en: telec-pwr-en-state { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 1a744a33bcf4..595533aeafc4 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/interconnect/qcom,sm8450.h> #include <dt-bindings/soc/qcom,gpr.h> @@ -154,7 +155,6 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { @@ -256,22 +256,18 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-l3-off"; arm,psci-suspend-param = <0x41000044>; entry-latency-us = <1050>; exit-latency-us = <2500>; min-residency-us = <5309>; - local-timer-stop; }; CLUSTER_SLEEP_1: cluster-sleep-1 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c344>; entry-latency-us = <2700>; exit-latency-us = <3500>; min-residency-us = <13959>; - local-timer-stop; }; }; }; @@ -748,7 +744,7 @@ <&ufs_mem_phy_lanes 0>, <&ufs_mem_phy_lanes 1>, <&ufs_mem_phy_lanes 2>, - <0>; + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "sleep_clk", "pcie_0_pipe_clk", @@ -1746,8 +1742,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; /* * MSIs for BDF (1:0.0) only works with Device ID 0x5980. @@ -1790,7 +1786,6 @@ "aggre0", "aggre1"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1798,7 +1793,6 @@ reset-names = "pci"; power-domains = <&gcc PCIE_0_GDSC>; - power-domain-names = "gdsc"; phys = <&pcie0_lane>; phy-names = "pciephy"; @@ -1862,8 +1856,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; /* * MSIs for BDF (1:0.0) only works with Device ID 0x5a00. @@ -1904,7 +1898,6 @@ "ddrss_sf_tbu", "aggre1"; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -1912,13 +1905,12 @@ reset-names = "pci"; power-domains = <&gcc PCIE_1_GDSC>; - power-domain-names = "gdsc"; phys = <&pcie1_lane>; phy-names = "pciephy"; - perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; @@ -2034,37 +2026,24 @@ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8450-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sm8450-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; }; remoteproc_slpi: remoteproc@2400000 { @@ -2143,8 +2122,8 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; assigned-clock-rates = <19200000>, <19200000>; #clock-cells = <0>; @@ -2154,13 +2133,13 @@ #sound-dai-cells = <1>; }; - /* WSA2 */ swr4: soundwire-controller@31f0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x031f0000 0 0x2000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsa2macro>; clock-names = "iface"; + label = "WSA2"; qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2269,13 +2248,13 @@ #sound-dai-cells = <1>; }; - /* WSA */ swr0: soundwire-controller@3250000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x03250000 0 0x2000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsamacro>; clock-names = "iface"; + label = "WSA"; qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2299,8 +2278,8 @@ swr2: soundwire-controller@33b0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x033b0000 0 0x2000>; - interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core", "wakeup"; clocks = <&vamacro>; @@ -2763,6 +2742,12 @@ }; }; + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -2795,6 +2780,78 @@ }; }; + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sm8450-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -2972,8 +3029,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, /* dp0 */ - <0>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <0>, /* dp1 */ <0>, <0>, /* dp2 */ @@ -3569,7 +3626,6 @@ pins = "gpio76", "gpio77", "gpio78", "gpio79"; function = "qup20"; }; - }; lpass_tlmm: pinctrl@3440000 { @@ -3632,7 +3688,6 @@ pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; - input-enable; }; }; @@ -3648,7 +3703,6 @@ pins = "gpio9"; function = "dmic2_data"; drive-strength = <8>; - input-enable; }; }; @@ -3689,6 +3743,20 @@ }; }; + sram@146aa000 { + compatible = "qcom,sm8450-imem", "syscon", "simple-mfd"; + reg = <0 0x146aa000 0 0x1000>; + ranges = <0 0 0x146aa000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -3981,8 +4049,11 @@ system-cache-controller@19200000 { compatible = "qcom,sm8450-llcc"; - reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>, + <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>, + <0 0x19a00000 0 0x80000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; @@ -4003,6 +4074,7 @@ power-domains = <&gcc UFS_PHY_GDSC>; iommus = <&apps_smmu 0xe0 0x0>; + dma-coherent; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; @@ -4153,8 +4225,27 @@ iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 5db6e789e6b8..e2b9bb6b1e27 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -27,6 +27,40 @@ stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -414,18 +448,27 @@ &pcie0 { wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + status = "okay"; }; &pcie0_phy { vdda-phy-supply = <&vreg_l1e_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; }; &pcie1 { wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + status = "okay"; }; @@ -433,6 +476,7 @@ vdda-phy-supply = <&vreg_l3c_0p91>; vdda-pll-supply = <&vreg_l3e_1p2>; vdda-qref-supply = <&vreg_l1e_0p88>; + status = "okay"; }; @@ -447,6 +491,11 @@ }; }; +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -546,13 +595,24 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&pm8550b_eusb2_repeater>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts new file mode 100644 index 000000000000..d5a645ee2a61 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -0,0 +1,439 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8550 QRD"; + compatible = "qcom,sm8550-qrd", "qcom,sm8550"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p25>; + vdd-l12-supply = <&vreg_s6g_1p86>; + vdd-l15-supply = <&vreg_s6g_1p86>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* ldo2 supplies SM8550 VDD_LPI_MX */ + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s4e_0p95: smps4 { + regulator-name = "vreg_s4e_0p95"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p08: smps5 { + regulator-name = "vreg_s5e_1p08"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p88: ldo3 { + regulator-name = "vreg_l3f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vreg_s1g_1p25: smps1 { + regulator-name = "vreg_s1g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p85: smps2 { + regulator-name = "vreg_s2g_0p85"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p8: smps3 { + regulator-name = "vreg_s3g_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p25: smps4 { + regulator-name = "vreg_s4g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p85: smps5 { + regulator-name = "vreg_s5g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p86: smps6 { + regulator-name = "vreg_s6g_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mbn", + "qcom/sm8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mbn", + "qcom/sm8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mbn", + "qcom/sm8550/modem_dtb.mbn"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vccq2-supply = <&vreg_l3g_1p2>; + vccq2-max-microamp = <100>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p88>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index ff4d342c0725..6e9bad8f6f33 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -66,8 +66,9 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a510"; reg = <0 0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; power-domains = <&CPU_PD0>; @@ -89,8 +90,9 @@ CPU1: cpu@100 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a510"; reg = <0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; power-domains = <&CPU_PD1>; @@ -108,8 +110,9 @@ CPU2: cpu@200 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a510"; reg = <0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; power-domains = <&CPU_PD2>; @@ -127,8 +130,9 @@ CPU3: cpu@300 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a715"; reg = <0 0x300>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_300>; power-domains = <&CPU_PD3>; @@ -146,8 +150,9 @@ CPU4: cpu@400 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a715"; reg = <0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_400>; power-domains = <&CPU_PD4>; @@ -165,8 +170,9 @@ CPU5: cpu@500 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a710"; reg = <0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_500>; power-domains = <&CPU_PD5>; @@ -184,8 +190,9 @@ CPU6: cpu@600 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a710"; reg = <0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; power-domains = <&CPU_PD6>; @@ -203,8 +210,9 @@ CPU7: cpu@700 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x3"; reg = <0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; next-level-cache = <&L2_700>; power-domains = <&CPU_PD7>; @@ -412,7 +420,6 @@ no-map; }; - hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 { reg = <0 0x811d0000 0 0x30000>; no-map; @@ -1653,8 +1660,8 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; bus-range = <0x00 0xff>; dma-coherent; @@ -1672,27 +1679,25 @@ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>; - clock-names = "pipe", - "aux", + clock-names = "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", "ddrss_sf_tbu", - "aggre0"; + "noc_aggr"; - interconnect-names = "pcie-mem"; - interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>; + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; - iommus = <&apps_smmu 0x1400 0x7f>; iommu-map = <0x0 &apps_smmu 0x1400 0x1>, <0x100 &apps_smmu 0x1401 0x1>; @@ -1704,12 +1709,6 @@ phys = <&pcie0_phy>; phy-names = "pciephy"; - perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_default_state>; - status = "disabled"; }; @@ -1752,8 +1751,8 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; bus-range = <0x00 0xff>; dma-coherent; @@ -1771,8 +1770,7 @@ <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_AUX_CLK>, + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>, @@ -1780,42 +1778,34 @@ <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; - clock-names = "pipe", - "aux", + clock-names = "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", "ddrss_sf_tbu", - "aggre1", - "cnoc_pcie_sf_axi"; + "noc_aggr", + "cnoc_sf_axi"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - interconnect-names = "pcie-mem"; - interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>; + interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; - iommus = <&apps_smmu 0x1480 0x7f>; iommu-map = <0x0 &apps_smmu 0x1480 0x1>, <0x100 &apps_smmu 0x1481 0x1>; resets = <&gcc GCC_PCIE_1_BCR>, <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; - reset-names = "pci", - "pcie_1_link_down_reset"; + reset-names = "pci", "link_down"; power-domains = <&gcc PCIE_1_GDSC>; phys = <&pcie1_phy>; phy-names = "pciephy"; - perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; - enable-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_state>; - status = "disabled"; }; @@ -1823,18 +1813,17 @@ compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy"; reg = <0x0 0x01c0e000 0x0 0x2000>; - clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&tcsr TCSR_PCIE_1_CLKREF_EN>, <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, - <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_PHY_AUX_CLK>; + <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "aux", "cfg_ahb", "ref", "rchng", - "pipe", "aux_phy"; + "pipe"; resets = <&gcc GCC_PCIE_1_PHY_BCR>, <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; - reset-names = "phy", "nocsr"; + reset-names = "phy", "phy_nocsr"; assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; assigned-clock-rates = <100000000>; @@ -1861,7 +1850,7 @@ }; crypto: crypto@1de0000 { - compatible = "qcom,sm8550-qce"; + compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce"; reg = <0x0 0x01dfa000 0x0 0x6000>; dmas = <&cryptobam 4>, <&cryptobam 5>; dma-names = "rx", "tx"; @@ -1905,6 +1894,7 @@ required-opps = <&rpmhpd_opp_nom>; iommus = <&apps_smmu 0x60 0x0>; + dma-coherent; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; @@ -1935,9 +1925,18 @@ <0 0>, <0 0>, <0 0>; + qcom,ice = <&ice>; + status = "disabled"; }; + ice: crypto@1d88000 { + compatible = "qcom,sm8550-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0 0x01f40000 0 0x20000>; @@ -1994,10 +1993,210 @@ }; }; + lpass_wsa2macro: codec@6aa0000 { + compatible = "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06aa0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&wsa2_swr_active>; + #sound-dai-cells = <1>; + }; + + swr3: soundwire-controller@6ab0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_rxmacro: codec@6ac0000 { + compatible = "qcom,sm8550-lpass-rx-macro"; + reg = <0 0x06ac0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_active>; + #sound-dai-cells = <1>; + }; + + swr1: soundwire-controller@6ad0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + label = "RX"; + + qcom,din-ports = <0>; + qcom,dout-ports = <10>; + + qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_txmacro: codec@6ae0000 { + compatible = "qcom,sm8550-lpass-tx-macro"; + reg = <0 0x06ae0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_active>; + #sound-dai-cells = <1>; + }; + + lpass_wsamacro: codec@6b00000 { + compatible = "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06b00000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_active>; + #sound-dai-cells = <1>; + }; + + swr0: soundwire-controller@6b10000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + label = "WSA"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + swr2: soundwire-controller@6d30000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06d30000 0 0x10000>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + clocks = <&lpass_vamacro>; + clock-names = "iface"; + label = "TX"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_vamacro: codec@6d44000 { + compatible = "qcom,sm8550-lpass-va-macro"; + reg = <0 0x06d44000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "macro", "dcodec"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + lpass_tlmm: pinctrl@6e80000 { compatible = "qcom,sm8550-lpass-lpi-pinctrl"; reg = <0 0x06e80000 0 0x20000>, - <0 0x0725a000 0 0x10000>; + <0 0x07250000 0 0x10000>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 23>; @@ -2005,6 +2204,110 @@ clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "core", "audio"; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; }; lpass_lpiaon_noc: interconnect@7400000 { @@ -2210,7 +2513,8 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; operating-points-v2 = <&mdss_dsi_opp_table>; @@ -2302,8 +2606,10 @@ power-domains = <&rpmhpd SM8550_MMCX>; - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; operating-points-v2 = <&mdss_dsi_opp_table>; @@ -2467,6 +2773,25 @@ phys = <&usb_1_hsphy>, <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -2691,7 +3016,7 @@ pins = "gpio28", "gpio29"; function = "qup1_se0"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c1_data_clk: qup-i2c1-data-clk-state { @@ -2699,7 +3024,7 @@ pins = "gpio32", "gpio33"; function = "qup1_se1"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c2_data_clk: qup-i2c2-data-clk-state { @@ -2707,7 +3032,7 @@ pins = "gpio36", "gpio37"; function = "qup1_se2"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c3_data_clk: qup-i2c3-data-clk-state { @@ -2715,7 +3040,7 @@ pins = "gpio40", "gpio41"; function = "qup1_se3"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c4_data_clk: qup-i2c4-data-clk-state { @@ -2723,7 +3048,7 @@ pins = "gpio44", "gpio45"; function = "qup1_se4"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c5_data_clk: qup-i2c5-data-clk-state { @@ -2731,7 +3056,7 @@ pins = "gpio52", "gpio53"; function = "qup1_se5"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c6_data_clk: qup-i2c6-data-clk-state { @@ -2739,7 +3064,7 @@ pins = "gpio48", "gpio49"; function = "qup1_se6"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c8_data_clk: qup-i2c8-data-clk-state { @@ -2747,14 +3072,14 @@ pins = "gpio57"; function = "qup2_se0_l1_mira"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; sda-pins { pins = "gpio56"; function = "qup2_se0_l0_mira"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; }; @@ -2763,7 +3088,7 @@ pins = "gpio60", "gpio61"; function = "qup2_se1"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c10_data_clk: qup-i2c10-data-clk-state { @@ -2771,7 +3096,7 @@ pins = "gpio64", "gpio65"; function = "qup2_se2"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c11_data_clk: qup-i2c11-data-clk-state { @@ -2779,7 +3104,7 @@ pins = "gpio68", "gpio69"; function = "qup2_se3"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c12_data_clk: qup-i2c12-data-clk-state { @@ -2787,7 +3112,7 @@ pins = "gpio2", "gpio3"; function = "qup2_se4"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c13_data_clk: qup-i2c13-data-clk-state { @@ -2795,7 +3120,7 @@ pins = "gpio80", "gpio81"; function = "qup2_se5"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_i2c15_data_clk: qup-i2c15-data-clk-state { @@ -2803,14 +3128,14 @@ pins = "gpio72", "gpio106"; function = "qup2_se7"; drive-strength = <2>; - bias-pull-up; + bias-pull-up = <2200>; }; qup_spi0_cs: qup-spi0-cs-state { - cs-pins { - pins = "gpio31"; - function = "qup1_se0"; - }; + pins = "gpio31"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; }; qup_spi0_data_clk: qup-spi0-data-clk-state { @@ -3171,7 +3496,7 @@ intc: interrupt-controller@17100000 { compatible = "arm,gic-v3"; - reg = <0 0x17100000 0 0x10000>, /* GICD */ + reg = <0 0x17100000 0 0x10000>, /* GICD */ <0 0x17180000 0 0x200000>; /* GICR * 8 */ ranges; #interrupt-cells = <3>; @@ -3339,6 +3664,7 @@ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; pmu@24091000 { @@ -3391,7 +3717,7 @@ }; pmu@240b6400 { - compatible = "qcom,sm8550-cpu-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x240b6400 0 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 0699b51c1247..f130165577a8 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -28,10 +28,6 @@ dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb -dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb -dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb -dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb-kf.dtb - dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb @@ -67,6 +63,7 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f0-spider.dtb dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtbo dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb @@ -79,9 +76,11 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb +dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb +dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index e21653d86228..10abfde329d0 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -49,17 +49,14 @@ opp-shared; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; opp-suspend; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts deleted file mode 100644 index c6ca61a8ed40..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts +++ /dev/null @@ -1,49 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x - * - * Copyright (C) 2015 Renesas Electronics Corp. - */ - -/dts-v1/; -#include "r8a77950.dtsi" -#include "salvator-x.dtsi" - -/ { - model = "Renesas Salvator-X board based on r8a77950"; - compatible = "renesas,salvator-x", "renesas,r8a7795"; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - - memory@500000000 { - device_type = "memory"; - reg = <0x5 0x00000000 0x0 0x40000000>; - }; - - memory@600000000 { - device_type = "memory"; - reg = <0x6 0x00000000 0x0 0x40000000>; - }; - - memory@700000000 { - device_type = "memory"; - reg = <0x7 0x00000000 0x0 0x40000000>; - }; -}; - -&du { - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 721>, - <&versaclock5 1>, - <&x21_clk>, - <&x22_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", - "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts deleted file mode 100644 index 85f008ef63de..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES1.x - * - * Copyright (C) 2017 Renesas Electronics Corp. - * Copyright (C) 2017 Cogent Embedded, Inc. - */ - -#include "r8a77950-ulcb.dts" -#include "ulcb-kf.dtsi" - -/ { - model = "Renesas H3ULCB Kingfisher board based on r8a77950"; - compatible = "shimafuji,kingfisher", "renesas,h3ulcb", - "renesas,r8a7795"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts deleted file mode 100644 index 5340579931e3..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES1.x - * - * Copyright (C) 2016 Renesas Electronics Corp. - * Copyright (C) 2016 Cogent Embedded, Inc. - */ - -/dts-v1/; -#include "r8a77950.dtsi" -#include "ulcb.dtsi" - -/ { - model = "Renesas H3ULCB board based on r8a77950"; - compatible = "renesas,h3ulcb", "renesas,r8a7795"; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - - memory@500000000 { - device_type = "memory"; - reg = <0x5 0x00000000 0x0 0x40000000>; - }; - - memory@600000000 { - device_type = "memory"; - reg = <0x6 0x00000000 0x0 0x40000000>; - }; - - memory@700000000 { - device_type = "memory"; - reg = <0x7 0x00000000 0x0 0x40000000>; - }; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi deleted file mode 100644 index 57eb88177e92..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a77950.dtsi +++ /dev/null @@ -1,330 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the R-Car H3 (R8A77950) SoC - * - * Copyright (C) 2015 Renesas Electronics Corp. - */ - -#include "r8a77951.dtsi" - -#undef SOC_HAS_USB2_CH3 - -&audma0 { - iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, - <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, - <&ipmmu_mp1 4>, <&ipmmu_mp1 5>, - <&ipmmu_mp1 6>, <&ipmmu_mp1 7>, - <&ipmmu_mp1 8>, <&ipmmu_mp1 9>, - <&ipmmu_mp1 10>, <&ipmmu_mp1 11>, - <&ipmmu_mp1 12>, <&ipmmu_mp1 13>, - <&ipmmu_mp1 14>, <&ipmmu_mp1 15>; -}; - -&audma1 { - iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>, - <&ipmmu_mp1 18>, <&ipmmu_mp1 19>, - <&ipmmu_mp1 20>, <&ipmmu_mp1 21>, - <&ipmmu_mp1 22>, <&ipmmu_mp1 23>, - <&ipmmu_mp1 24>, <&ipmmu_mp1 25>, - <&ipmmu_mp1 26>, <&ipmmu_mp1 27>, - <&ipmmu_mp1 28>, <&ipmmu_mp1 29>, - <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; -}; - -&cluster0_opp { - /delete-node/ opp-1600000000; - /delete-node/ opp-1700000000; -}; - -&du { - renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>; -}; - -&fcpvb1 { - iommus = <&ipmmu_vp0 7>; -}; - -&fcpf1 { - iommus = <&ipmmu_vp0 1>; -}; - -&fcpvi1 { - iommus = <&ipmmu_vp0 9>; -}; - -&fcpvd2 { - iommus = <&ipmmu_vi0 10>; -}; - -&gpio1 { - gpio-ranges = <&pfc 0 32 28>; -}; - -&ipmmu_vi0 { - renesas,ipmmu-main = <&ipmmu_mm 11>; -}; - -&ipmmu_vp0 { - renesas,ipmmu-main = <&ipmmu_mm 12>; -}; - -&ipmmu_vc0 { - renesas,ipmmu-main = <&ipmmu_mm 9>; -}; - -&ipmmu_vc1 { - renesas,ipmmu-main = <&ipmmu_mm 10>; -}; - -&ipmmu_rt { - renesas,ipmmu-main = <&ipmmu_mm 7>; -}; - -&soc { - /delete-node/ dma-controller@e6460000; - /delete-node/ dma-controller@e6470000; - - ipmmu_mp1: iommu@ec680000 { - compatible = "renesas,ipmmu-r8a7795"; - reg = <0 0xec680000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 5>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_sy: iommu@e7730000 { - compatible = "renesas,ipmmu-r8a7795"; - reg = <0 0xe7730000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 8>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - /delete-node/ iommu@fd950000; - /delete-node/ iommu@fd960000; - /delete-node/ iommu@fd970000; - /delete-node/ iommu@febe0000; - /delete-node/ iommu@fe980000; - - xhci1: usb@ee040000 { - compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; - reg = <0 0xee040000 0 0xc00>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 327>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 327>; - status = "disabled"; - }; - - /delete-node/ usb@e659c000; - /delete-node/ usb@ee0e0000; - /delete-node/ usb@ee0e0100; - - /delete-node/ usb-phy@ee0e0200; - - fdp1@fe948000 { - compatible = "renesas,fdp1"; - reg = <0 0xfe948000 0 0x2400>; - interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 117>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 117>; - renesas,fcp = <&fcpf2>; - }; - - fcpf2: fcp@fe952000 { - compatible = "renesas,fcpf"; - reg = <0 0xfe952000 0 0x200>; - clocks = <&cpg CPG_MOD 613>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 613>; - iommus = <&ipmmu_vp0 2>; - }; - - fcpvd3: fcp@fea3f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea3f000 0 0x200>; - clocks = <&cpg CPG_MOD 600>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 600>; - iommus = <&ipmmu_vi0 11>; - }; - - fcpvi2: fcp@fe9cf000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe9cf000 0 0x200>; - clocks = <&cpg CPG_MOD 609>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 609>; - iommus = <&ipmmu_vp0 10>; - }; - - vspd3: vsp@fea38000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea38000 0 0x5000>; - interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 620>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 620>; - - renesas,fcp = <&fcpvd3>; - }; - - vspi2: vsp@fe9c0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9c0000 0 0x8000>; - interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 629>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 629>; - - renesas,fcp = <&fcpvi2>; - }; - - csi21: csi2@fea90000 { - compatible = "renesas,r8a7795-csi2"; - reg = <0 0xfea90000 0 0x10000>; - interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 713>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 713>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - - csi21vin0: endpoint@0 { - reg = <0>; - remote-endpoint = <&vin0csi21>; - }; - csi21vin1: endpoint@1 { - reg = <1>; - remote-endpoint = <&vin1csi21>; - }; - csi21vin2: endpoint@2 { - reg = <2>; - remote-endpoint = <&vin2csi21>; - }; - csi21vin3: endpoint@3 { - reg = <3>; - remote-endpoint = <&vin3csi21>; - }; - csi21vin4: endpoint@4 { - reg = <4>; - remote-endpoint = <&vin4csi21>; - }; - csi21vin5: endpoint@5 { - reg = <5>; - remote-endpoint = <&vin5csi21>; - }; - csi21vin6: endpoint@6 { - reg = <6>; - remote-endpoint = <&vin6csi21>; - }; - csi21vin7: endpoint@7 { - reg = <7>; - remote-endpoint = <&vin7csi21>; - }; - }; - }; - }; -}; - -&vin0 { - ports { - port@1 { - vin0csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin0>; - }; - }; - }; -}; - -&vin1 { - ports { - port@1 { - vin1csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin1>; - }; - }; - }; -}; - -&vin2 { - ports { - port@1 { - vin2csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin2>; - }; - }; - }; -}; - -&vin3 { - ports { - port@1 { - vin3csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin3>; - }; - }; - }; -}; - -&vin4 { - ports { - port@1 { - vin4csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin4>; - }; - }; - }; -}; - -&vin5 { - ports { - port@1 { - vin5csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin5>; - }; - }; - }; -}; - -&vin6 { - ports { - port@1 { - vin6csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin6>; - }; - }; - }; -}; - -&vin7 { - ports { - port@1 { - vin7csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin7>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index f770d160e948..10b91e9733bf 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -75,7 +75,6 @@ opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 09c61696f7fb..3ea8572e917f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -70,13 +70,11 @@ opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 59a18dfcb8cc..d52cb0b67d80 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -70,13 +70,11 @@ opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 9b4f7ad95ca8..9584115c6b17 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -75,13 +75,11 @@ opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 1d326552e2fa..68d1f1d53b3a 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -14,3 +14,11 @@ model = "Renesas Condor board based on r8a77980"; compatible = "renesas,condor", "renesas,r8a77980"; }; + +&i2c0 { + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index d168b0e7747d..77d22df25fff 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -122,6 +122,7 @@ phy0: ethernet-phy@0 { compatible = "ethernet-phy-id0022.1622", "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index d4718f144e33..4529e9b57c33 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -49,17 +49,14 @@ opp-shared; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; opp-suspend; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi index e06b8eda85e1..dbc8dcab109d 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi @@ -5,6 +5,8 @@ * Copyright (C) 2021 Glider bv */ +#include <dt-bindings/media/video-interfaces.h> + &csi40 { status = "okay"; @@ -105,6 +107,7 @@ port@4 { reg = <4>; max96712_out0: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; clock-lanes = <0>; data-lanes = <1 2 3 4>; remote-endpoint = <&csi40_in>; @@ -125,6 +128,7 @@ port@4 { reg = <4>; max96712_out1: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; clock-lanes = <0>; data-lanes = <1 2 3 4>; lane-polarities = <0 0 0 0 1>; @@ -146,6 +150,7 @@ port@4 { reg = <4>; max96712_out2: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; clock-lanes = <0>; data-lanes = <1 2 3 4>; lane-polarities = <0 0 0 0 1>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index b2e67b82caf6..63db822e5f46 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -37,8 +37,12 @@ }; }; +&can_clk { + clock-frequency = <40000000>; +}; + &canfd { - pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>; + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; pinctrl-names = "default"; status = "okay"; @@ -80,6 +84,11 @@ }; + can_clk_pins: can-clk { + groups = "can_clk"; + function = "can_clk"; + }; + canfd0_pins: canfd0 { groups = "canfd0_data"; function = "canfd0"; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 41fbb9998cf8..bf587a14ec19 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -606,7 +606,8 @@ }; canfd: can@e6660000 { - compatible = "renesas,r8a779a0-canfd"; + compatible = "renesas,r8a779a0-canfd", + "renesas,rcar-gen4-canfd"; reg = <0 0xe6660000 0 0x8000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -2097,7 +2098,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee480000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 10>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2106,7 +2107,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee4c0000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 19>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2115,7 +2116,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed00000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 0>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2124,7 +2125,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed40000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 1>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2133,7 +2134,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed80000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 3>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_A3IR>; #iommu-cells = <1>; }; @@ -2142,7 +2143,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeedc0000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 12>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2151,7 +2152,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeee80000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 14>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2160,7 +2161,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeeec0000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 15>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2169,7 +2170,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeee00000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 6>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2178,7 +2179,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeef00000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 5>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2187,7 +2188,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeef40000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 11>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2209,8 +2210,7 @@ interrupt-controller; reg = <0x0 0xf1000000 0 0x20000>, <0x0 0xf1060000 0 0x110000>; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; fcpvd0: fcp@fea10000 { @@ -2857,9 +2857,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index f20b612b2b9a..1d5426e6293c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -1059,7 +1059,7 @@ compatible = "renesas,ipmmu-r8a779f0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee480000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 10>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -1068,7 +1068,7 @@ compatible = "renesas,ipmmu-r8a779f0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee4c0000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 19>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -1077,7 +1077,7 @@ compatible = "renesas,ipmmu-r8a779f0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed00000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 0>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -1086,7 +1086,7 @@ compatible = "renesas,ipmmu-r8a779f0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed40000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 2>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -1108,8 +1108,7 @@ interrupt-controller; reg = <0x0 0xf1000000 0 0x20000>, <0x0 0xf1060000 0 0x110000>; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; prr: chipid@fff00044 { @@ -1119,7 +1118,7 @@ }; thermal-zones { - sensor_thermal1: sensor1-thermal { + sensor_thermal_rtcore: sensor1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; @@ -1133,7 +1132,7 @@ }; }; - sensor_thermal2: sensor2-thermal { + sensor_thermal_apcore0: sensor2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; @@ -1147,7 +1146,7 @@ }; }; - sensor_thermal3: sensor3-thermal { + sensor_thermal_apcore4: sensor3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; @@ -1164,10 +1163,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; ufs30_clk: ufs30-clk { diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso new file mode 100644 index 000000000000..e6f53377ecd9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the White Hawk board with ARD-AUDIO-DA7212 Board + * + * You can find and buy "ARD-AUDIO-DA7212" at Digi-Key + * + * https://www.digikey.jp/en/products/detail/ARD-AUDIO-DA7212/1564-1021-ND/5456357 + * + * Copyright (C) 2022 Renesas Electronics Corp. + * + * + * [Connection] + * + * White Hawk ARD-AUDIO-DA7212 + * +----------------------------+ + * |CPU board | + * | | + * |CN40 (IO PIN HEADER) | + * | AUDIO_CLKIN_V pin1 |<--\ +---------------+ + * |(*) GP1_25/SL_SW2_V pin2 |<--/ |J2 | + * | AUDIO_CLKOUT_V pin5 |<----->| pin7 MCLK | + * | SSI_SCK_V pin9 |<----->| pin1 BCLK | + * | SSI_WS_V pin13 |<----->| pin3 WCLK | + * | SSI_SD_V pin15 |<----->| pin5 DATIN | (@) + * | | \-->| pin15 DATOUT | [CAPTURE] + * +----------------------------+ +---------------+ + * +----------------------------+ + * |Breakout board | + * | | +---------------+ + * |CN34 (I2C CN) | |J1 | + * | I2C0_SCL pin3 |<----->| pin20 SCL | + * | I2C0_SDA pin5 |<----->| pin18 SDA | + * | | +---------------+ + * | | +-----------------------+ + * |CN4 (Power) | |J7 | + * | 3v3 (v) pin9 |<----->| pin4 / pin8 3.3v | + * | GND (v) pin3 / pin4 |<----->| pin12 / pin14 GND | + * +----------------------------+ +-----------------------+ + * (*) GP1_25/SL_SW2_V is used as TPU + * (@) Connect to pin5 (DATIN = playback) or pin15 (DATOUT = capture) + * (v) These are just sample pins. You can find many 3v3 / GND pins on + * White Hawk board, not only CN4. You can use other pins for it. + * + * [How to enable] + * + * You need these configs + * + * CONFIG_PWM + * CONFIG_PWM_RENESAS_TPU + * CONFIG_COMMON_CLK_PWM + * CONFIG_SND_SOC_DA7213 + * + * [How to use] + * + * 44.1kHz groups sound is available by default. + * You need to update audio_clkin settings to switch to 48kHz groups sound. + * see + * [(C) clock] + * + * You can use capture if you change the settings + * see + * [CAPTURE] + * + * You need to setup Headphone + * + * > amixer set "Headphone" 40% + * > amixer set "Headphone" on + * > amixer set "Mixout Left DAC Left" on + * > amixer set "Mixout Right DAC Right" on + */ + +/dts-v1/; +/plugin/; +#include <dt-bindings/clock/r8a779g0-cpg-mssr.h> + +&{/} { + sound_card: sound { + compatible = "audio-graph-card"; + label = "rcar-sound"; + + dais = <&rsnd_port>; /* DA7212 Audio Codec */ + }; + + tpu_clk: tpu-clk { + compatible = "pwm-clock"; + #clock-cells = <0>; + + /* 44.1kHz groups [(C) clock] */ + clock-frequency = <11289600>; + pwms = <&tpu 0 88 0>; /* 1000000000 / 88 =~ 11289600 */ + + /* 48 kHz groups [(C) clock] */ +// clock-frequency = <12288000>; +// pwms = <&tpu 0 81 0>; /* 1000000000 / 81 =~ 12288000 */ + }; + +}; + +&pfc { + sound_pins: sound { + groups = "ssi_ctrl", "ssi_data"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clkin", "audio_clkout"; + function = "audio_clk"; + }; + + tpu0_pins: tpu0 { + groups = "tpu_to0_a"; + function = "tpu"; + }; +}; + +&tpu { + pinctrl-0 = <&tpu0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "dlg,da7212"; + + #sound-dai-cells = <0>; + reg = <0x1a>; + + clocks = <&rcar_sound>; + clock-names = "mclk"; + + dlg,micbias1-lvl = <2500>; + dlg,micbias2-lvl = <2500>; + dlg,dmic-data-sel = "lrise_rfall"; + dlg,dmic-samplephase = "between_clkedge"; + dlg,dmic-clkrate = <3000000>; + + VDDA-supply = <®_1p8v>; + VDDMIC-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + port { + da7212_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint>; + }; + }; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>, <&sound_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout */ + #clock-cells = <0>; + clock-frequency = <5644800>; /* 44.1kHz groups [(C) clock] */ +// clock-frequency = <6144000>; /* 48 kHz groups [(C) clock] */ + + status = "okay"; + + /* Update <clkin> to <tpu_clk> */ + clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&tpu_clk>; + + ports { + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&da7212_endpoint>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint>; + frame-master = <&rsnd_endpoint>; + + /* Mutually exclusive with 'capture' */ + playback = <&ssi0>; + /* [CAPTURE] */ + /* capture = <&ssi0>; */ + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi index ae7522b60e5d..f8537f7ea4de 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi @@ -5,7 +5,63 @@ * Copyright (C) 2022 Glider bv */ +#include <dt-bindings/media/video-interfaces.h> + +&csi40 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi40_in: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3>; + remote-endpoint = <&max96712_out0>; + }; + }; + }; +}; + +&csi41 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi41_in: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3>; + remote-endpoint = <&max96712_out1>; + }; + }; + }; +}; + &i2c0 { + pca9654_a: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9654_b: gpio@22 { + compatible = "onnn,pca9654"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + eeprom@52 { compatible = "rohm,br24g01", "atmel,24c01"; label = "csi-dsi-sub-board-id"; @@ -13,3 +69,119 @@ pagesize = <8>; }; }; + +&i2c1 { + gmsl0: gmsl-deserializer@49 { + compatible = "maxim,max96712"; + reg = <0x49>; + enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out0: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; + + gmsl1: gmsl-deserializer@4b { + compatible = "maxim,max96712"; + reg = <0x4b>; + enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out1: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3>; + remote-endpoint = <&csi41_in>; + }; + }; + }; + }; +}; + +&isp0 { + status = "okay"; +}; + +&isp1 { + status = "okay"; +}; + +&vin00 { + status = "okay"; +}; + +&vin01 { + status = "okay"; +}; + +&vin02 { + status = "okay"; +}; + +&vin03 { + status = "okay"; +}; + +&vin04 { + status = "okay"; +}; + +&vin05 { + status = "okay"; +}; + +&vin06 { + status = "okay"; +}; + +&vin07 { + status = "okay"; +}; + +&vin08 { + status = "okay"; +}; + +&vin09 { + status = "okay"; +}; + +&vin10 { + status = "okay"; +}; + +&vin11 { + status = "okay"; +}; + +&vin12 { + status = "okay"; +}; + +&vin13 { + status = "okay"; +}; + +&vin14 { + status = "okay"; +}; + +&vin15 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts index 04a2b6b83e74..eff1ef6e2cc8 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts @@ -13,6 +13,33 @@ / { model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0"; compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0"; + + can_transceiver0: can-phy0 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + max-bitrate = <5000000>; + }; +}; + +&can_clk { + clock-frequency = <40000000>; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; + + channel0 { + status = "okay"; + phys = <&can_transceiver0>; + }; + + channel1 { + status = "okay"; + }; }; &i2c0 { @@ -23,3 +50,20 @@ pagesize = <8>; }; }; + +&pfc { + can_clk_pins: can-clk { + groups = "can_clk"; + function = "can_clk"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + canfd1_pins: canfd1 { + groups = "canfd1_data"; + function = "canfd1"; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 7a87a5dc1b6a..d3d25e077c5d 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -14,6 +14,20 @@ #address-cells = <2>; #size-cells = <2>; + /* External Audio clock - to be overridden by boards that provide it */ + audio_clkin: audio_clkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -431,6 +445,18 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6198000 { + compatible = "renesas,r8a779g0-thermal"; + reg = <0 0xe6198000 0 0x200>, + <0 0xe61a0000 0 0x200>, + <0 0xe61a8000 0 0x200>, + <0 0xe61b0000 0 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a779g0", "renesas,irqc"; #interrupt-cells = <2>; @@ -682,6 +708,56 @@ status = "disabled"; }; + canfd: can@e6660000 { + compatible = "renesas,r8a779g0-canfd", + "renesas,rcar-gen4-canfd"; + reg = <0 0xe6660000 0 0x8500>; + interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; + clocks = <&cpg CPG_MOD 328>, + <&cpg CPG_CORE R8A779G0_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A779G0_CLK_CANFD>; + assigned-clock-rates = <80000000>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + + channel2 { + status = "disabled"; + }; + + channel3 { + status = "disabled"; + }; + + channel4 { + status = "disabled"; + }; + + channel5 { + status = "disabled"; + }; + + channel6 { + status = "disabled"; + }; + + channel7 { + status = "disabled"; + }; + }; + avb0: ethernet@e6800000 { compatible = "renesas,etheravb-r8a779g0", "renesas,etheravb-rcar-gen4"; @@ -1098,6 +1174,454 @@ status = "disabled"; }; + vin00: video@e6ef0000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 730>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 730>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin00isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin00>; + }; + }; + }; + }; + + vin01: video@e6ef1000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 731>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 731>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin01isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin01>; + }; + }; + }; + }; + + vin02: video@e6ef2000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 800>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 800>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin02isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin02>; + }; + }; + }; + }; + + vin03: video@e6ef3000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 801>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 801>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin03isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin03>; + }; + }; + }; + }; + + vin04: video@e6ef4000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 802>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin04isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin04>; + }; + }; + }; + }; + + vin05: video@e6ef5000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 803>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 803>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin05isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin05>; + }; + }; + }; + }; + + vin06: video@e6ef6000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 804>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin06isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin06>; + }; + }; + }; + }; + + vin07: video@e6ef7000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 805>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin07isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin07>; + }; + }; + }; + }; + + vin08: video@e6ef8000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <8>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin08isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin08>; + }; + }; + }; + }; + + vin09: video@e6ef9000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <9>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin09isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin09>; + }; + }; + }; + }; + + vin10: video@e6efa000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 808>; + renesas,id = <10>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin10isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin10>; + }; + }; + }; + }; + + vin11: video@e6efb000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <11>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin11isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin11>; + }; + }; + }; + }; + + vin12: video@e6efc000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 810>; + renesas,id = <12>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin12isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin12>; + }; + }; + }; + }; + + vin13: video@e6efd000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <13>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin13isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin13>; + }; + }; + }; + }; + + vin14: video@e6efe000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 812>; + renesas,id = <14>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin14isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin14>; + }; + }; + }; + }; + + vin15: video@e6eff000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 813>; + renesas,id = <15>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin15isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin15>; + }; + }; + }; + }; + dmac0: dma-controller@e7350000 { compatible = "renesas,dmac-r8a779g0", "renesas,rcar-gen4-dmac"; @@ -1131,6 +1655,14 @@ resets = <&cpg 709>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7351000 { @@ -1166,6 +1698,192 @@ resets = <&cpg 710>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>, + <&ipmmu_ds0 18>, <&ipmmu_ds0 19>, + <&ipmmu_ds0 20>, <&ipmmu_ds0 21>, + <&ipmmu_ds0 22>, <&ipmmu_ds0 23>, + <&ipmmu_ds0 24>, <&ipmmu_ds0 25>, + <&ipmmu_ds0 26>, <&ipmmu_ds0 27>, + <&ipmmu_ds0 28>, <&ipmmu_ds0 29>, + <&ipmmu_ds0 30>, <&ipmmu_ds0 31>; + }; + + rcar_sound: sound@ec5a0000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * audio_clkout0/1/2/3 : #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a779g0", "renesas,rcar_sound-gen4"; + reg = <0 0xec5a0000 0 0x020>, + <0 0xec540000 0 0x1000>, + <0 0xec541000 0 0x050>, + <0 0xec400000 0 0x40000>; + reg-names = "adg", "ssiu", "ssi", "sdmc"; + + clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&audio_clkin>; + clock-names = "ssiu.0", "ssi.0", "clkin"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 2926>, <&cpg 2927>; + reset-names = "ssiu.0", "ssi.0"; + status = "disabled"; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&dmac0 0x6e>, <&dmac0 0x6f>; + dma-names = "tx", "rx"; + }; + ssiu01: ssiu-1 { + dmas = <&dmac0 0x6c>, <&dmac0 0x6d>; + dma-names = "tx", "rx"; + }; + ssiu02: ssiu-2 { + dmas = <&dmac0 0x6a>, <&dmac0 0x6b>; + dma-names = "tx", "rx"; + }; + ssiu03: ssiu-3 { + dmas = <&dmac0 0x68>, <&dmac0 0x69>; + dma-names = "tx", "rx"; + }; + ssiu04: ssiu-4 { + dmas = <&dmac0 0x66>, <&dmac0 0x67>; + dma-names = "tx", "rx"; + }; + ssiu05: ssiu-5 { + dmas = <&dmac0 0x64>, <&dmac0 0x65>; + dma-names = "tx", "rx"; + }; + ssiu06: ssiu-6 { + dmas = <&dmac0 0x62>, <&dmac0 0x63>; + dma-names = "tx", "rx"; + }; + ssiu07: ssiu-7 { + dmas = <&dmac0 0x60>, <&dmac0 0x61>; + dma-names = "tx", "rx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + ipmmu_rt0: iommu@ee480000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xee480000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt1: iommu@ee4c0000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xee4c0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds0: iommu@eed00000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeed00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: iommu@eed40000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeed40000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: iommu@eed80000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeed80000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_vc: iommu@eedc0000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeedc0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_3dg: iommu@eee00000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeee00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: iommu@eee80000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeee80000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi1: iommu@eeec0000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeeec0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: iommu@eef00000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeef00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: iommu@eef40000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeef40000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: iommu@eefc0000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeefc0000 0 0x20000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; }; mmc0: mmc@ee140000 { @@ -1179,6 +1897,7 @@ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; resets = <&cpg 706>; max-frequency = <200000000>; + iommus = <&ipmmu_ds0 32>; status = "disabled"; }; @@ -1205,8 +1924,59 @@ interrupt-controller; reg = <0x0 0xf1000000 0 0x20000>, <0x0 0xf1060000 0 0x110000>; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + csi40: csi2@fe500000 { + compatible = "renesas,r8a779g0-csi2"; + reg = <0 0xfe500000 0 0x40000>; + interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 331>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi40isp0: endpoint { + remote-endpoint = <&isp0csi40>; + }; + }; + }; + }; + + csi41: csi2@fe540000 { + compatible = "renesas,r8a779g0-csi2"; + reg = <0 0xfe540000 0 0x40000>; + interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 400>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 400>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi41isp1: endpoint { + remote-endpoint = <&isp1csi41>; + }; + }; + }; }; fcpvd0: fcp@fea10000 { @@ -1281,6 +2051,172 @@ }; }; + isp0: isp@fed00000 { + compatible = "renesas,r8a779g0-isp"; + reg = <0 0xfed00000 0 0x10000>; + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A779G0_PD_A3ISP0>; + resets = <&cpg 612>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp0csi40: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi40isp0>; + }; + }; + + port@1 { + reg = <1>; + isp0vin00: endpoint { + remote-endpoint = <&vin00isp0>; + }; + }; + + port@2 { + reg = <2>; + isp0vin01: endpoint { + remote-endpoint = <&vin01isp0>; + }; + }; + + port@3 { + reg = <3>; + isp0vin02: endpoint { + remote-endpoint = <&vin02isp0>; + }; + }; + + port@4 { + reg = <4>; + isp0vin03: endpoint { + remote-endpoint = <&vin03isp0>; + }; + }; + + port@5 { + reg = <5>; + isp0vin04: endpoint { + remote-endpoint = <&vin04isp0>; + }; + }; + + port@6 { + reg = <6>; + isp0vin05: endpoint { + remote-endpoint = <&vin05isp0>; + }; + }; + + port@7 { + reg = <7>; + isp0vin06: endpoint { + remote-endpoint = <&vin06isp0>; + }; + }; + + port@8 { + reg = <8>; + isp0vin07: endpoint { + remote-endpoint = <&vin07isp0>; + }; + }; + }; + }; + + isp1: isp@fed20000 { + compatible = "renesas,r8a779g0-isp"; + reg = <0 0xfed20000 0 0x10000>; + interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A779G0_PD_A3ISP1>; + resets = <&cpg 613>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp1csi41: endpoint@1 { + reg = <1>; + remote-endpoint = <&csi41isp1>; + }; + }; + + port@1 { + reg = <1>; + isp1vin08: endpoint { + remote-endpoint = <&vin08isp1>; + }; + }; + + port@2 { + reg = <2>; + isp1vin09: endpoint { + remote-endpoint = <&vin09isp1>; + }; + }; + + port@3 { + reg = <3>; + isp1vin10: endpoint { + remote-endpoint = <&vin10isp1>; + }; + }; + + port@4 { + reg = <4>; + isp1vin11: endpoint { + remote-endpoint = <&vin11isp1>; + }; + }; + + port@5 { + reg = <5>; + isp1vin12: endpoint { + remote-endpoint = <&vin12isp1>; + }; + }; + + port@6 { + reg = <6>; + isp1vin13: endpoint { + remote-endpoint = <&vin13isp1>; + }; + }; + + port@7 { + reg = <7>; + isp1vin14: endpoint { + remote-endpoint = <&vin14isp1>; + }; + }; + + port@8 { + reg = <8>; + isp1vin15: endpoint { + remote-endpoint = <&vin15isp1>; + }; + }; + }; + }; + dsi0: dsi-encoder@fed80000 { compatible = "renesas,r8a779g0-dsi-csi2-tx"; reg = <0 0xfed80000 0 0x10000>; @@ -1345,11 +2281,69 @@ }; }; + thermal-zones { + sensor_thermal_cr52: sensor1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal_cnn: sensor2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal_ca76: sensor3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal_ddr1: sensor4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 3>; + + trips { + sensor4_crit: sensor4-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi index b6e855f52adf..1064a87a0c77 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi @@ -12,6 +12,9 @@ }; &cluster0_opp { + opp-1700000000 { + /delete-property/ turbo-mode; + }; opp-2000000000 { opp-hz = /bits/ 64 <2000000000>; opp-microvolt = <960000>; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi index 6cff38a6d20b..7fdbdd97ed4b 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi @@ -12,6 +12,9 @@ }; &cluster0_opp { + opp-1800000000 { + /delete-property/ turbo-mode; + }; opp-2000000000 { opp-hz = /bits/ 64 <2000000000>; opp-microvolt = <960000>; diff --git a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi index 8c9c0557fe77..df51e0ff5986 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi @@ -12,6 +12,9 @@ }; &cluster0_opp { + opp-1800000000 { + /delete-property/ turbo-mode; + }; opp-2000000000 { opp-hz = /bits/ 64 <2000000000>; opp-microvolt = <960000>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso b/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso new file mode 100644 index 000000000000..4edd103c7711 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/{G2UL, Five} SMARC EVK PMOD parts + * + * Copyright (C) 2023 Renesas Electronics Corp. + * + * + * [Connection] + * + * SMARC EVK + * +----------------------------+ + * |CN7 (PMOD1 PIN HEADER) | + * | SCI0_TXD pin7 | + * | SCI0_RXD pin8 | + * | Gnd pin11 | + * | Vcc pin12 | + * +----------------------------+ + * + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +&pinctrl { + can0-stb-hog { + status = "disabled"; + }; + + can1-stb-hog { + status = "disabled"; + }; + + sci0_pins: sci0-pins { + pinmux = <RZG2L_PORT_PINMUX(2, 2, 5)>, /* TxD */ + <RZG2L_PORT_PINMUX(2, 3, 5)>; /* RxD */ + }; +}; + +&sci0 { + pinctrl-0 = <&sci0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index c8a83e42c4f3..27c35a657b15 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -80,9 +80,8 @@ reg = <0 0x10049c00 0 0x400>; interrupts = <SOC_PERIPHERAL_IRQ(326) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(327) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(329) IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>, <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -101,9 +100,8 @@ reg = <0 0x1004a000 0 0x400>; interrupts = <SOC_PERIPHERAL_IRQ(330) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(331) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(333) IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>, <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -121,10 +119,8 @@ "renesas,rz-ssi"; reg = <0 0x1004a400 0 0x400>; interrupts = <SOC_PERIPHERAL_IRQ(334) IRQ_TYPE_LEVEL_HIGH>, - <SOC_PERIPHERAL_IRQ(335) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(336) IRQ_TYPE_EDGE_RISING>, <SOC_PERIPHERAL_IRQ(337) IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + interrupt-names = "int_req", "dma_rt"; clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>, <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -143,9 +139,8 @@ reg = <0 0x1004a800 0 0x400>; interrupts = <SOC_PERIPHERAL_IRQ(338) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(339) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(341) IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>, <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -569,9 +564,11 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD R9A07G043_DMAC_ACLK>, <&cpg CPG_MOD R9A07G043_DMAC_PCLK>; + clock-names = "main", "register"; power-domains = <&cpg>; resets = <&cpg R9A07G043_DMAC_ARESETN>, <&cpg R9A07G043_DMAC_RST_ASYNC>; + reset-names = "arst", "rst_async"; #dma-cells = <1>; dma-channels = <16>; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi index 9d854706ada5..2ab231572d95 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi @@ -35,6 +35,11 @@ }; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -42,10 +47,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 487536696d90..1315be5167b9 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -157,6 +157,11 @@ }; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -175,9 +180,8 @@ reg = <0 0x10049c00 0 0x400>; interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>, <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -196,9 +200,8 @@ reg = <0 0x1004a000 0 0x400>; interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>, <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -216,10 +219,8 @@ "renesas,rz-ssi"; reg = <0 0x1004a400 0 0x400>; interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + interrupt-names = "int_req", "dma_rt"; clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>, <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -238,9 +239,8 @@ reg = <0 0x1004a800 0 0x400>; interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>, <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -618,6 +618,85 @@ status = "disabled"; }; + cru: video@10830000 { + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; + reg = <0 0x10830000 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>, + <&cpg CPG_MOD R9A07G044_CRU_ACLK>; + clock-names = "video", "apb", "axi"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_ARESETN>; + reset-names = "presetn", "aresetn"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + cruparallel: endpoint@0 { + reg = <0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + crucsi2: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi2cru>; + }; + }; + }; + }; + + csi2: csi2@10830400 { + compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2"; + reg = <0 0x10830400 0 0xfc00>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>, + <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>; + clock-names = "system", "video", "apb"; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_CMN_RSTB>; + reset-names = "presetn", "cmn-rstb"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint = <&crucsi2>; + }; + }; + }; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g044-cpg"; reg = <0 0x11010000 0 0x10000>; @@ -740,9 +819,11 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>, <&cpg CPG_MOD R9A07G044_DMAC_PCLK>; + clock-names = "main", "register"; power-domains = <&cpg>; resets = <&cpg R9A07G044_DMAC_ARESETN>, <&cpg R9A07G044_DMAC_RST_ASYNC>; + reset-names = "arst", "rst_async"; #dma-cells = <1>; dma-channels = <16>; }; @@ -1061,9 +1142,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi index 1d57df706939..56a979e82c4f 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi @@ -15,13 +15,6 @@ /delete-node/ cpu-map; /delete-node/ cpu@100; }; - - timer { - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; - }; }; &soc { diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi index 9d89d4590358..9cf27ca9f1d2 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi @@ -15,11 +15,4 @@ /delete-node/ cpu-map; /delete-node/ cpu@100; }; - - timer { - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; - }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso new file mode 100644 index 000000000000..d834bff9bda2 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree overlay for the RZ/G2L SMARC EVK with OV5645 camera + * connected to CSI and CRU enabled. + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +#define OV5645_PARENT_I2C i2c0 +#include "rz-smarc-cru-csi-ov5645.dtsi" + +&ov5645 { + enable-gpios = <&pinctrl RZG2L_GPIO(2, 0) GPIO_ACTIVE_HIGH>; + reset-gpios = <&pinctrl RZG2L_GPIO(40, 2) GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 304ade54425b..cc11e5855d62 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -157,6 +157,11 @@ }; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -175,9 +180,8 @@ reg = <0 0x10049c00 0 0x400>; interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G054_SSI0_PCLK2>, <&cpg CPG_MOD R9A07G054_SSI0_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -196,9 +200,8 @@ reg = <0 0x1004a000 0 0x400>; interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G054_SSI1_PCLK2>, <&cpg CPG_MOD R9A07G054_SSI1_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -216,10 +219,8 @@ "renesas,rz-ssi"; reg = <0 0x1004a400 0 0x400>; interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + interrupt-names = "int_req", "dma_rt"; clocks = <&cpg CPG_MOD R9A07G054_SSI2_PCLK2>, <&cpg CPG_MOD R9A07G054_SSI2_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -238,9 +239,8 @@ reg = <0 0x1004a800 0 0x400>; interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G054_SSI3_PCLK2>, <&cpg CPG_MOD R9A07G054_SSI3_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -746,9 +746,11 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD R9A07G054_DMAC_ACLK>, <&cpg CPG_MOD R9A07G054_DMAC_PCLK>; + clock-names = "main", "register"; power-domains = <&cpg>; resets = <&cpg R9A07G054_DMAC_ARESETN>, <&cpg R9A07G054_DMAC_RST_ASYNC>; + reset-names = "arst", "rst_async"; #dma-cells = <1>; dma-channels = <16>; }; @@ -1067,9 +1069,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi index c448cc6634c1..d85a6ac0f024 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi @@ -15,11 +15,4 @@ /delete-node/ cpu-map; /delete-node/ cpu@100; }; - - timer { - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; - }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts index d6737395df67..39fe3f94991e 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r9a09g011.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rzv2m-pinctrl.h> / { @@ -22,6 +23,31 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hs_ep: endpoint { + remote-endpoint = <&usb3_hs_ep>; + }; + }; + + port@1 { + reg = <1>; + ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_in_ep>; + }; + }; + }; + }; + memory@58000000 { device_type = "memory"; /* @@ -35,6 +61,36 @@ device_type = "memory"; reg = <0x1 0x80000000 0x0 0x80000000>; }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&pwc 0 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 0>, <1800000 1>; + }; }; &avb { @@ -50,6 +106,23 @@ }; }; +&emmc { + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_1v8>; + bus-width = <8>; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + fixed-emmc-driver-type = <1>; + max-frequency = <200000000>; + status = "okay"; +}; + &extal_clk { clock-frequency = <48000000>; }; @@ -59,6 +132,30 @@ pinctrl-names = "default"; clock-frequency = <400000>; status = "okay"; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; + }; + + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; }; &i2c2 { @@ -69,6 +166,26 @@ }; &pinctrl { + emmc_pins: emmc { + data { + pinmux = <RZV2M_PORT_PINMUX(0, 0, 2)>, /* MMDAT0 */ + <RZV2M_PORT_PINMUX(0, 1, 2)>, /* MMDAT1 */ + <RZV2M_PORT_PINMUX(0, 2, 2)>, /* MMDAT2 */ + <RZV2M_PORT_PINMUX(0, 3, 2)>, /* MMDAT3 */ + <RZV2M_PORT_PINMUX(0, 4, 2)>, /* MMDAT4 */ + <RZV2M_PORT_PINMUX(0, 5, 2)>, /* MMDAT5 */ + <RZV2M_PORT_PINMUX(0, 6, 2)>, /* MMDAT6 */ + <RZV2M_PORT_PINMUX(0, 7, 2)>; /* MMDAT7 */ + power-source = <1800>; + }; + + ctrl { + pinmux = <RZV2M_PORT_PINMUX(0, 10, 2)>, /* MMCMD */ + <RZV2M_PORT_PINMUX(0, 11, 2)>; /* MMCLK */ + power-source = <1800>; + }; + }; + i2c0_pins: i2c0 { pinmux = <RZV2M_PORT_PINMUX(5, 0, 2)>, /* SDA */ <RZV2M_PORT_PINMUX(5, 1, 2)>; /* SCL */ @@ -78,6 +195,55 @@ pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */ <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */ }; + + sdhi0_pins: sd0 { + data { + pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */ + <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */ + <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */ + <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */ + power-source = <3300>; + }; + + ctrl { + pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */ + <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */ + power-source = <3300>; + }; + + cd { + pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */ + power-source = <3300>; + }; + }; + + sdhi0_pins_uhs: sd0-uhs { + data { + pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */ + <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */ + <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */ + <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */ + power-source = <1800>; + }; + + ctrl { + pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */ + <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */ + power-source = <1800>; + }; + + cd { + pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */ + power-source = <1800>; + }; + }; + + uart0_pins: uart0 { + pinmux = <RZV2M_PORT_PINMUX(3, 0, 2)>, /* UATX0 */ + <RZV2M_PORT_PINMUX(3, 1, 2)>, /* UARX0 */ + <RZV2M_PORT_PINMUX(3, 2, 2)>, /* UACTS0N */ + <RZV2M_PORT_PINMUX(3, 3, 2)>; /* UARTS0N */ + }; }; &pwc { @@ -85,10 +251,60 @@ status = "okay"; }; +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3v3>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + &uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; status = "okay"; }; +&usb3drd { + status = "okay"; +}; + +&usb3host { + status = "okay"; +}; + +&usb3peri { + companion = <&usb3host>; + status = "okay"; + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; + }; + }; +}; + &wdt0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index b5d6f7701ef1..46d67b200a66 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -117,6 +117,51 @@ status = "disabled"; }; + usb3drd: usb3drd@85070400 { + compatible = "renesas,r9a09g011-usb3drd", + "renesas,rzv2m-usb3drd"; + reg = <0x0 0x85070400 0x0 0x100>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "drd", "bc", "gpi"; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + resets = <&cpg R9A09G011_USB_DRD_RESET>; + power-domains = <&cpg>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + usb3host: usb@85060000 { + compatible = "renesas,r9a09g011-xhci", + "renesas,rzv2m-xhci"; + reg = <0 0x85060000 0 0x2000>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + resets = <&cpg R9A09G011_USB_ARESETN_H>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb3peri: usb3peri@85070000 { + compatible = "renesas,r9a09g011-usb3-peri", + "renesas,rzv2m-usb3-peri"; + reg = <0x0 0x85070000 0x0 0x400>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + resets = <&cpg R9A09G011_USB_ARESETN_P>; + power-domains = <&cpg>; + status = "disabled"; + }; + }; + avb: ethernet@a3300000 { compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m"; reg = <0 0xa3300000 0 0x800>; diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi new file mode 100644 index 000000000000..c5bb63c63b47 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common Device Tree for the RZ/G2L SMARC EVK (and alike EVKs) with + * OV5645 camera connected to CSI and CRU enabled. + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +&{/} { + ov5645_vdddo_1v8: 1p8v { + compatible = "regulator-fixed"; + regulator-name = "camera_vdddo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ov5645_vdda_2v8: 2p8v { + compatible = "regulator-fixed"; + regulator-name = "camera_vdda"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ov5645_vddd_1v5: 1p5v { + compatible = "regulator-fixed"; + regulator-name = "camera_vddd"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + ov5645_fixed_clk: osc25250-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&cru { + status = "okay"; +}; + +&csi2 { + status = "okay"; + + ports { + port@0 { + csi2_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ov5645_ep>; + }; + }; + }; +}; + +&OV5645_PARENT_I2C { + #address-cells = <1>; + #size-cells = <0>; + + ov5645: camera@3c { + compatible = "ovti,ov5645"; + reg = <0x3c>; + clocks = <&ov5645_fixed_clk>; + clock-frequency = <24000000>; + vdddo-supply = <&ov5645_vdddo_1v8>; + vdda-supply = <&ov5645_vdda_2v8>; + vddd-supply = <&ov5645_vddd_1v5>; + + port { + ov5645_ep: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi2_in>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index d693e879b330..0be2716659e9 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -267,6 +267,12 @@ }; }; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; }; &ohci1 { diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 99a44c400d6a..2d585bbb8f3a 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -14,8 +14,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb @@ -84,10 +86,13 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 4f6959eb564d..8332c8aaf49b 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -474,7 +474,7 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { + lvds_in: port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -489,6 +489,10 @@ remote-endpoint = <&vopl_out_lvds>; }; }; + + lvds_out: port@1 { + reg = <1>; + }; }; }; }; @@ -1134,7 +1138,7 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { + dsi_in: port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -1149,6 +1153,10 @@ remote-endpoint = <&vopl_out_dsi>; }; }; + + dsi_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts index 61b31688b469..ce318e05f0a6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts @@ -24,6 +24,8 @@ &internal_display { compatible = "elida,kd35t133"; + iovcc-supply = <&vcc_lcd>; + vdd-supply = <&vcc_lcd>; }; &pwm0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi index 04eba432fb0e..80fc53c807a4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi @@ -235,10 +235,8 @@ internal_display: panel@0 { reg = <0>; backlight = <&backlight>; - iovcc-supply = <&vcc_lcd>; reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; rotation = <270>; - vdd-supply = <&vcc_lcd>; port { mipi_in_panel: endpoint { diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts index 139c898e590e..d94ac81eb4e6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts @@ -83,6 +83,8 @@ &internal_display { compatible = "elida,kd35t133"; + iovcc-supply = <&vcc_lcd>; + vdd-supply = <&vcc_lcd>; }; &rk817 { diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 4702183b673c..aa6f5b12206b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -59,6 +59,8 @@ &internal_display { compatible = "elida,kd35t133"; + iovcc-supply = <&vcc_lcd>; + vdd-supply = <&vcc_lcd>; }; &rk817_charger { diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts index 842efbaf1a6a..35bbaf559ca3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts @@ -142,7 +142,10 @@ }; &internal_display { - status = "disabled"; + compatible = "elida,kd50t048a", "sitronix,st7701"; + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + IOVCC-supply = <&vcc_lcd>; + VCC-supply = <&vcc_lcd>; }; &rk817_charger { diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts new file mode 100644 index 000000000000..a07a26b944a0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3328-nanopi-r2s.dts" + +/ { + model = "FriendlyElec NanoPi R2C"; + compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328"; +}; + +&gmac2io { + phy-handle = <&yt8521s>; + tx_delay = <0x22>; + rx_delay = <0x12>; + + mdio { + /delete-node/ ethernet-phy@1; + + yt8521s: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts new file mode 100644 index 000000000000..5d7d567283e5 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Xunlong Software. Co., Ltd. + * (http://www.orangepi.org) + * + * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3328-orangepi-r1-plus.dts" + +/ { + model = "Xunlong Orange Pi R1 Plus LTS"; + compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328"; +}; + +&gmac2io { + phy-handle = <&yt8531c>; + tx_delay = <0x19>; + rx_delay = <0x05>; + + mdio { + /delete-node/ ethernet-phy@1; + + yt8531c: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <15000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index 083452c67711..e47d1398aeca 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -61,7 +61,6 @@ pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; - pwm-delay-us = <10000>; }; emmc_pwrseq: emmc-pwrseq { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index ee6095baba4d..5c1929d41cc0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -198,7 +198,6 @@ power-supply = <&pp3300_disp>; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; - pwm-delay-us = <10000>; }; gpio_keys: gpio-keys { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index a47d9f758611..c5e7de60c121 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -167,7 +167,6 @@ pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm1 0 1000000 0>; - pwm-delay-us = <10000>; }; dmic: dmic { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index 194e48c755f6..054c6a4d1a45 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -50,19 +50,9 @@ pinctrl-0 = <&panel_en_pin>; power-supply = <&vcc3v3_panel>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_in_edp: endpoint@0 { - reg = <0>; - remote-endpoint = <&edp_out_panel>; - }; + port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; }; }; }; @@ -675,7 +665,7 @@ i2c-scl-rising-time-ns = <168>; status = "okay"; - es8316: es8316@11 { + es8316: audio-codec@11 { compatible = "everest,es8316"; reg = <0x11>; clocks = <&cru SCLK_I2S_8CH_OUT>; @@ -943,7 +933,7 @@ disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - sd-uhs-sdr104; + sd-uhs-sdr50; vmmc-supply = <&vcc3v0_sd>; vqmmc-supply = <&vcc_sdio>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index a0795a2b1cb1..61f3fec5a8b1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/linux-event-codes.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -29,6 +30,31 @@ stdout-path = "serial2:115200n8"; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1600000>; + poll-interval = <100>; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <100000>; + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <600000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000 0>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -102,6 +128,30 @@ /* WL_REG_ON on module */ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + + /* MIPI DSI panel 1.8v supply */ + vcc1v8_lcd: vcc1v8-lcd { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc1v8_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + }; + + /* MIPI DSI panel 2.8v supply */ + vcc2v8_lcd: vcc2v8-lcd { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc2v8_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc3v3_sys>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + }; }; &cpu_alert0 { @@ -139,6 +189,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -333,6 +388,25 @@ }; }; +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt1158"; + reg = <0x14>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + &cluster0_opp { opp04 { status = "disabled"; @@ -362,6 +436,39 @@ status = "okay"; }; +&mipi_dsi { + status = "okay"; + clock-master; + + ports { + mipi_out: port@1 { + #address-cells = <0>; + #size-cells = <0>; + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel@0 { + compatible = "hannstar,hsd060bhw4"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc2v8_lcd>; + iovcc-supply = <&vcc1v8_lcd>; + pinctrl-names = "default"; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_1v8>; status = "okay"; @@ -429,6 +536,15 @@ status = "okay"; }; +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-sd-highspeed; @@ -479,3 +595,27 @@ &uart2 { status = "okay"; }; + +&vopb { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>, + <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; + assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>, + <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; + assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 78157521e944..bca2b50e0a93 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -647,16 +647,10 @@ avdd-supply = <&avdd>; backlight = <&backlight>; dvdd-supply = <&vcc3v3_s0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 1881b4b71f91..928948e7c7bb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -552,7 +552,7 @@ <0x0 0xfff10000 0 0x10000>, /* GICH */ <0x0 0xfff20000 0 0x10000>; /* GICV */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; - its: interrupt-controller@fee20000 { + its: msi-controller@fee20000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; @@ -1954,7 +1954,7 @@ }; }; - mipi_dsi: mipi@ff960000 { + mipi_dsi: dsi@ff960000 { compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff960000 0x0 0x8000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; @@ -1982,15 +1982,20 @@ reg = <0>; remote-endpoint = <&vopb_out_mipi>; }; + mipi_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_mipi>; }; }; + + mipi_out: port@1 { + reg = <1>; + }; }; }; - mipi_dsi1: mipi@ff968000 { + mipi_dsi1: dsi@ff968000 { compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff968000 0x0 0x8000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2025,10 +2030,14 @@ remote-endpoint = <&vopl_out_mipi1>; }; }; + + mipi1_out: port@1 { + reg = <1>; + }; }; }; - edp: edp@ff970000 { + edp: dp@ff970000 { compatible = "rockchip,rk3399-edp"; reg = <0x0 0xff970000 0x0 0x8000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2045,6 +2054,7 @@ ports { #address-cells = <1>; #size-cells = <0>; + edp_in: port@0 { reg = <0>; #address-cells = <1>; @@ -2060,6 +2070,10 @@ remote-endpoint = <&vopl_out_edp>; }; }; + + edp_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi index 65a80d1f6d91..2a2821f4c580 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi @@ -16,8 +16,52 @@ }; &cru { - assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; - assigned-clock-rates = <1200000000>, <200000000>, <241500000>; + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, + <200000000>, <241500000>; +}; + +&dsi_dphy0 { + status = "okay"; +}; + +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + dsi0_in: port@0 { + reg = <0>; + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; + }; + + dsi0_out: port@1 { + reg = <1>; + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel: panel@0 { + compatible = "anbernic,rg353p-panel", "newvision,nv3051d"; + reg = <0>; + backlight = <&backlight>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc3v3_lcd0_n>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; }; &gpio_keys_control { @@ -55,6 +99,22 @@ }; }; +&pinctrl { + gpio-lcd { + lcd_rst: lcd-rst { + rockchip,pins = + <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + &pwm4 { status = "okay"; }; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts index b4b2df821cba..c763c7f3b1b3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts @@ -105,8 +105,10 @@ }; &cru { - assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; - assigned-clock-rates = <1200000000>, <200000000>, <500000000>; + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, + <200000000>, <500000000>; }; &dsi_dphy0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi index 41262a69d33e..8fadd8afb190 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi @@ -716,7 +716,7 @@ status = "okay"; bluetooth { - compatible = "realtek,rtl8821cs-bt"; + compatible = "realtek,rtl8821cs-bt", "realtek,rtl8822cs-bt"; device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts index 2671f207cfd1..410cd3e5e7bc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts @@ -495,7 +495,7 @@ }; &usb2phy0_otg { - vbus-supply = <&vcc5v0_usb2_otg>; + phy-supply = <&vcc5v0_usb2_otg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts index d89d5263cb5e..5e4236af4fcb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts @@ -254,6 +254,14 @@ status = "okay"; }; +&usb2phy0_otg { + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + &vop { assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi index ce7165d7f1a1..102e448bc026 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi @@ -598,7 +598,7 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; - sd-uhs-sdr104; + sd-uhs-sdr50; vmmc-supply = <&vcc3v3_sys>; vqmmc-supply = <&vcc_1v8>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts new file mode 100644 index 000000000000..f70ca9f0470a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3568-nanopi-r5s.dtsi" + +/ { + model = "FriendlyElec NanoPi R5C"; + compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&reset_button_pin>; + + button-reset { + debounce-interval = <50>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + label = "reset"; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>; + + led-lan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; + }; + + power_led: led-power { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + linux,default-trigger = "heartbeat"; + gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + + led-wan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; + }; + + led-wlan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20_reset_pin>; + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie3x1 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie3x2 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + gpio-leds { + lan_led_pin: lan-led-pin { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + power_led_pin: power-led-pin { + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_led_pin: wlan-led-pin { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie20_reset_pin: pcie20-reset-pin { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rockchip-key { + reset_button_pin: reset-button-pin { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts new file mode 100644 index 000000000000..2a1118f15c29 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3568-nanopi-r5s.dtsi" + +/ { + model = "FriendlyElec NanoPi R5S"; + compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>; + + led-lan1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; + }; + + led-lan2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>; + }; + + power_led: led-power { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + linux,default-trigger = "heartbeat"; + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + }; + + led-wan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 15ms, 50ms for rtl8211f */ + snps,reset-delays-us = <0 15000 50000>; + tx_delay = <0x3c>; + rx_delay = <0x2f>; + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-0 = <ð_phy0_reset_pin>; + pinctrl-names = "default"; + }; +}; + +&pcie2x1 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + data-lanes = <1 2>; + status = "okay"; +}; + +&pcie3x1 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie3x2 { + num-lanes = <1>; + num-ib-windows = <8>; + num-ob-windows = <8>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + gmac0 { + eth_phy0_reset_pin: eth-phy0-reset-pin { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + lan1_led_pin: lan1-led-pin { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lan2_led_pin: lan2-led-pin { + rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + power_led_pin: power-led-pin { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi new file mode 100644 index 000000000000..58ba328ea782 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi @@ -0,0 +1,590 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + vdd_usbc: vdd-usbc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_usbc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_usbc>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_usbc>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <200000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_usbc>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + pcie30_avdd0v9: pcie30-avdd0v9-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + }; +}; + +&i2c5 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "rtcic_32kout"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&pcie30phy { + data-lanes = <1 2>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_usb_host_en: vcc5v0-usb-host-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb_otg_en: vcc5v0-usb-otg-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; + status = "okay"; +}; + +&sdmmc0 { + max-frequency = <150000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + dr_mode = "host"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1_otg { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index eed0059a68b8..f62e0fd881a9 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -744,8 +744,8 @@ compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x00 0xfe060000 0x00 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "hclk"; - clocks = <&cru PCLK_DSITX_0>, <&cru HCLK_VO>; + clock-names = "pclk"; + clocks = <&cru PCLK_DSITX_0>; phy-names = "dphy"; phys = <&dsi_dphy0>; power-domains = <&power RK3568_PD_VO>; @@ -772,8 +772,8 @@ compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xfe070000 0x0 0x10000>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "hclk"; - clocks = <&cru PCLK_DSITX_1>, <&cru HCLK_VO>; + clock-names = "pclk"; + clocks = <&cru PCLK_DSITX_1>; phy-names = "dphy"; phys = <&dsi_dphy1>; power-domains = <&power RK3568_PD_VO>; @@ -1808,6 +1808,7 @@ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1819,6 +1820,7 @@ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1830,6 +1832,7 @@ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1841,6 +1844,7 @@ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1852,6 +1856,7 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; gpio-controller; + gpio-ranges = <&pinctrl 0 128 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 95805cb0adfa..3e4aee8f70c1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -2,6 +2,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "rk3588.dtsi" / { @@ -17,6 +18,31 @@ stdout-path = "serial2:1500000n8"; }; + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + sound { + compatible = "audio-graph-card"; + label = "Analog"; + + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + + dais = <&i2s0_8ch_p0>; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + }; + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -27,6 +53,132 @@ }; }; +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + &sdhci { bus-width = <8>; no-sdio; diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi index d085e57fbc4c..8be75556af8f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi @@ -7,6 +7,74 @@ #include "rk3588-pinctrl.dtsi" / { + i2s8_8ch: i2s@fddc8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc8000 0x0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 22>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S8_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s6_8ch: i2s@fddf4000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf4000 0x0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 4>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S6_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s7_8ch: i2s@fddf8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf8000 0x0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 21>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S7_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s10_8ch: i2s@fde00000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfde00000 0x0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 24>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S10_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gmac0: ethernet@fe1b0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1b0000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts new file mode 100644 index 000000000000..93b4a0c4ed0f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588s.dtsi" + +/ { + model = "Khadas Edge2"; + compatible = "khadas,edge2", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index 005cde61b4b2..657c019d27fa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -60,6 +60,8 @@ enable-method = "psci"; capacity-dmips-mhz = <530>; clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <32768>; i-cache-line-size = <64>; @@ -136,6 +138,8 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <65536>; i-cache-line-size = <64>; @@ -174,6 +178,8 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <65536>; i-cache-line-size = <64>; @@ -222,6 +228,7 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; next-level-cache = <&l3_cache>; }; @@ -230,6 +237,7 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; next-level-cache = <&l3_cache>; }; @@ -238,6 +246,7 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; next-level-cache = <&l3_cache>; }; @@ -246,6 +255,7 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; next-level-cache = <&l3_cache>; }; @@ -254,6 +264,7 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; next-level-cache = <&l3_cache>; }; @@ -262,6 +273,7 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; next-level-cache = <&l3_cache>; }; @@ -270,6 +282,7 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; next-level-cache = <&l3_cache>; }; @@ -278,6 +291,7 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; next-level-cache = <&l3_cache>; }; @@ -286,6 +300,7 @@ cache-size = <3145728>; cache-line-size = <64>; cache-sets = <4096>; + cache-level = <3>; }; }; @@ -304,10 +319,6 @@ scmi_clk: protocol@14 { reg = <0x14>; - assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>, - <&scmi_clk SCMI_CLK_CPUB23>; - assigned-clock-rates = <1200000000>, - <1200000000>; #clock-cells = <1>; }; @@ -414,7 +425,7 @@ <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>, <&cru CLK_GPU>; assigned-clock-rates = - <100000000>, <786432000>, + <1100000000>, <786432000>, <850000000>, <1188000000>, <702000000>, <400000000>, <500000000>, @@ -810,6 +821,57 @@ }; }; + i2s4_8ch: i2s@fddc0000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc0000 0x0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 0>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S4_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s5_8ch: i2s@fddf0000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf0000 0x0 0x1000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 2>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S5_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s9_8ch: i2s@fddfc000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddfc000 0x0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 23>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S9_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + qos_gpu_m0: qos@fdf35000 { compatible = "rockchip,rk3588-qos", "syscon"; reg = <0x0 0xfdf35000 0x0 0x20>; @@ -1099,6 +1161,21 @@ }; }; + sdmmc: mmc@fe2c0000 { + compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&scmi_clk SCMI_HCLK_SD>, <&scmi_clk SCMI_CCLK_SD>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + power-domains = <&power RK3588_PD_SDMMC>; + status = "disabled"; + }; + sdhci: mmc@fe2e0000 { compatible = "rockchip,rk3588-dwcmshc"; reg = <0x0 0xfe2e0000 0x0 0x10000>; @@ -1117,6 +1194,103 @@ status = "disabled"; }; + i2s0_8ch: i2s@fe470000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe470000 0x0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdi1 + &i2s0_sdi2 + &i2s0_sdi3 + &i2s0_sdo0 + &i2s0_sdo1 + &i2s0_sdo2 + &i2s0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1_8ch: i2s@fe480000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe480000 0x0 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_lrck + &i2s1m0_sclk + &i2s1m0_sdi0 + &i2s1m0_sdi1 + &i2s1m0_sdi2 + &i2s1m0_sdi3 + &i2s1m0_sdo0 + &i2s1m0_sdo1 + &i2s1m0_sdo2 + &i2s1m0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2_2ch: i2s@fe490000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe490000 0x0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 0>, <&dmac1 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2m1_lrck + &i2s2m1_sclk + &i2s2m1_sdi + &i2s2m1_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s3_2ch: i2s@fe4a0000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe4a0000 0x0 0x1000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S3_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 2>, <&dmac1 3>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s3_lrck + &i2s3_sclk + &i2s3_sdi + &i2s3_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@fe600000 { compatible = "arm,gic-v3"; reg = <0x0 0xfe600000 0 0x10000>, /* GICD */ @@ -1226,6 +1400,14 @@ status = "disabled"; }; + wdt: watchdog@feaf0000 { + compatible = "rockchip,rk3588-wdt", "snps,dw-wdt"; + reg = <0x0 0xfeaf0000 0x0 0x100>; + clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>; + clock-names = "tclk", "pclk"; + interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>; + }; + spi0: spi@feb00000 { compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; reg = <0x0 0xfeb00000 0x0 0x1000>; @@ -1557,6 +1739,26 @@ status = "disabled"; }; + tsadc: tsadc@fec00000 { + compatible = "rockchip,rk3588-tsadc"; + reg = <0x0 0xfec00000 0x0 0x400>; + interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + assigned-clocks = <&cru CLK_TSADC>; + assigned-clock-rates = <2000000>; + resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>; + reset-names = "tsadc-apb", "tsadc"; + rockchip,hw-tshut-temp = <120000>; + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + pinctrl-0 = <&tsadc_gpio_func>; + pinctrl-1 = <&tsadc_shut>; + pinctrl-names = "gpio", "otpout"; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + i2c6: i2c@fec80000 { compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; reg = <0x0 0xfec80000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile index f4f1f5148cc2..97522fb0bf66 100644 --- a/arch/arm64/boot/dts/sprd/Makefile +++ b/arch/arm64/boot/dts/sprd/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \ sp9860g-1h10.dtb \ - sp9863a-1h10.dtb + sp9863a-1h10.dtb \ + ums512-1h10.dtb diff --git a/arch/arm64/boot/dts/sprd/ums512-1h10.dts b/arch/arm64/boot/dts/sprd/ums512-1h10.dts new file mode 100644 index 000000000000..46890f6d140d --- /dev/null +++ b/arch/arm64/boot/dts/sprd/ums512-1h10.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Unisoc UMS512-1h10 boards DTS file + * + * Copyright (C) 2021, Unisoc Inc. + */ + +/dts-v1/; + +#include "ums512.dtsi" + +/ { + model = "Unisoc UMS512-1H10 Board"; + + compatible = "sprd,ums512-1h10", "sprd,ums512"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* SD card */ +&sdio0 { + bus-width = <4>; + no-sdio; + no-mmc; + sprd,phy-delay-sd-uhs-sdr104 = <0x7f 0x73 0x72 0x72>; + sprd,phy-delay-sd-uhs-sdr50 = <0x6e 0x7f 0x01 0x01>; + sprd,phy-delay-sd-highspeed = <0x7f 0x1a 0x9a 0x9a>; + sprd,phy-delay-legacy = <0x7f 0x1a 0x9a 0x9a>; + sd-uhs-sdr104; + sd-uhs-sdr50; +}; + +/* EMMC storage */ +&sdio3 { + status = "okay"; + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + cap-mmc-hw-reset; +}; diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi new file mode 100644 index 000000000000..024be594c47d --- /dev/null +++ b/arch/arm64/boot/dts/sprd/ums512.dtsi @@ -0,0 +1,911 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Unisoc UMS512 SoC DTS file + * + * Copyright (C) 2021, Unisoc Inc. + */ + +#include <dt-bindings/clock/sprd,ums512-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + core4 { + cpu = <&CPU4>; + }; + core5 { + cpu = <&CPU5>; + }; + core6 { + cpu = <&CPU6>; + }; + core7 { + cpu = <&CPU7>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x400>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x500>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x600>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x700>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + }; + + idle-states { + entry-method = "psci"; + CORE_PD: core-pd { + compatible = "arm,idle-state"; + entry-latency-us = <4000>; + exit-latency-us = <4000>; + min-residency-us = <10000>; + local-timer-stop; + arm,psci-suspend-param = <0x00010000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@12000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x12000000 0 0x20000>, /* GICD */ + <0x0 0x12040000 0 0x100000>; /* GICR */ + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + redistributor-stride = <0x0 0x20000>; /* 128KB stride */ + #redistributor-regions = <1>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + ap_ahb_regs: syscon@20100000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x20100000 0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20100000 0x4000>; + + apahb_gate: clock-controller@0 { + compatible = "sprd,ums512-apahb-gate"; + reg = <0x0 0x3000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + }; + + pub_apb_regs: syscon@31050000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x31050000 0 0x9000>; + }; + + top_dvfs_apb_regs: syscon@322a0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x322a0000 0 0x8000>; + }; + + ap_intc0_regs: syscon@32310000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32310000 0 0x1000>; + }; + + ap_intc1_regs: syscon@32320000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32320000 0 0x1000>; + }; + + ap_intc2_regs: syscon@32330000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32330000 0 0x1000>; + }; + + ap_intc3_regs: syscon@32340000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32340000 0 0x1000>; + }; + + ap_intc4_regs: syscon@32350000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32350000 0 0x1000>; + }; + + ap_intc5_regs: syscon@32360000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32360000 0 0x1000>; + }; + + anlg_phy_g0_regs: syscon@32390000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32390000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x32390000 0x3000>; + + dpll0: clock-controller@0 { + compatible = "sprd,ums512-g0-pll"; + reg = <0x0 0x100>; + #clock-cells = <1>; + }; + }; + + anlg_phy_g2_regs: syscon@323b0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x323b0000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x323b0000 0x3000>; + + mpll1: clock-controller@0 { + compatible = "sprd,ums512-g2-pll"; + reg = <0x0 0x100>; + #clock-cells = <1>; + }; + }; + + anlg_phy_g3_regs: syscon@323c0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x323c0000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x323c0000 0x3000>; + + pll1: clock-controller@0 { + compatible = "sprd,ums512-g3-pll"; + reg = <0x0 0x3000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + }; + + anlg_phy_gc_regs: syscon@323e0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x323e0000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x323e0000 0x3000>; + + pll2: clock-controller@0 { + compatible = "sprd,ums512-gc-pll"; + reg = <0x0 0x100>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + }; + + anlg_phy_g10_regs: syscon@323f0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x323f0000 0 0x3000>; + }; + + aon_apb_regs: syscon@327d0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x327d0000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x327d0000 0x3000>; + + aonapb_gate: clock-controller@0 { + compatible = "sprd,ums512-aon-gate"; + reg = <0x0 0x3000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + }; + + pmu_apb_regs: syscon@327e0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x327e0000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x327e0000 0x3000>; + + pmu_gate: clock-controller@0 { + compatible = "sprd,ums512-pmu-gate"; + reg = <0x0 0x3000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + }; + + audcp_apb_regs: syscon@3350d000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x3350d000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x3350d000 0x1000>; + + audcpapb_gate: clock-controller@0 { + compatible = "sprd,ums512-audcpapb-gate"; + reg = <0x0 0x300>; + #clock-cells = <1>; + }; + }; + + audcp_ahb_regs: syscon@335e0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x335e0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x335e0000 0x1000>; + + audcpahb_gate: clock-controller@0 { + compatible = "sprd,ums512-audcpahb-gate"; + reg = <0x0 0x300>; + #clock-cells = <1>; + }; + }; + + gpu_apb_regs: syscon@60100000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x60100000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x60100000 0x3000>; + + gpu_clk: clock-controller@0 { + compatible = "sprd,ums512-gpu-clk"; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + reg = <0x0 0x100>; + #clock-cells = <1>; + }; + }; + + gpu_dvfs_apb_regs: syscon@60110000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x60110000 0 0x3000>; + }; + + mm_ahb_regs: syscon@62200000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x62200000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x62200000 0x3000>; + + mm_gate: clock-controller@0 { + compatible = "sprd,ums512-mm-gate-clk"; + reg = <0x0 0x3000>; + #clock-cells = <1>; + }; + }; + + ap_apb_regs: syscon@71000000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x71000000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x71000000 0x3000>; + + apapb_gate: clock-controller@0 { + compatible = "sprd,ums512-apapb-gate"; + reg = <0x0 0x3000>; + #clock-cells = <1>; + }; + }; + + ap_clk: clock-controller@20200000 { + compatible = "sprd,ums512-ap-clk"; + reg = <0 0x20200000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + + aon_clk: clock-controller@32080000 { + compatible = "sprd,ums512-aonapb-clk"; + reg = <0 0x32080000 0 0x1000>; + clocks = <&ext_26m>, <&ext_32k>, + <&ext_4m>, <&rco_100m>; + clock-names = "ext-26m", "ext-32k", + "ext-4m", "rco-100m"; + #clock-cells = <1>; + }; + + mm_clk: clock-controller@62100000 { + compatible = "sprd,ums512-mm-clk"; + reg = <0 0x62100000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + + /* SoC Funnel */ + funnel@3c002000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x3c002000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_soc_out_port: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + funnel_soc_in_port: endpoint { + remote-endpoint = + <&funnel_corinth_out_port>; + }; + }; + }; + }; + + /* SoC ETF */ + soc_etb: etb@3c003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x3c003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + in-ports { + port { + etb_in: endpoint { + remote-endpoint = + <&funnel_soc_out_port>; + }; + }; + }; + }; + + /* AP-CPU Funnel for core3/4/5/7 */ + funnel@3e001000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x3e001000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_corinth_lit_out_port: endpoint { + remote-endpoint = + <&corinth_etf_lit_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_core_in_port3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_core_in_port4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_core_in_port5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_core_in_port7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + /* AP-CPU ETF for little cores */ + etf@3e002000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x3e002000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + corinth_etf_lit_out: endpoint { + remote-endpoint = + <&funnel_corinth_from_lit_in_port>; + }; + }; + }; + + in-ports { + port { + corinth_etf_lit_in: endpoint { + remote-endpoint = + <&funnel_corinth_lit_out_port>; + }; + }; + }; + }; + + /* AP-CPU ETF for big cores */ + etf@3e003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x3e003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + corinth_etf_big_out: endpoint { + remote-endpoint = + <&funnel_corinth_from_big_in_port>; + }; + }; + }; + + in-ports { + port { + corinth_etf_big_in: endpoint { + remote-endpoint = + <&funnel_corinth_big_out_port>; + }; + }; + }; + }; + + /* Funnel to SoC */ + funnel@3e004000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x3e004000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_corinth_out_port: endpoint { + remote-endpoint = + <&funnel_soc_in_port>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_corinth_from_lit_in_port: endpoint { + remote-endpoint = <&corinth_etf_lit_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_corinth_from_big_in_port: endpoint { + remote-endpoint = <&corinth_etf_big_out>; + }; + }; + }; + }; + + /* AP-CPU Funnel for core0/1/2/6 */ + funnel@3e005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x3e005000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_corinth_big_out_port: endpoint { + remote-endpoint = <&corinth_etf_big_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_core_in_port0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_core_in_port1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_core_in_port2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_core_in_port6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + }; + }; + + etm0: etm@3f040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f040000 0 0x1000>; + cpu = <&CPU0>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&funnel_core_in_port0>; + }; + }; + }; + }; + + etm1: etm@3f140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f140000 0 0x1000>; + cpu = <&CPU1>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&funnel_core_in_port1>; + }; + }; + }; + }; + + etm2: etm@3f240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f240000 0 0x1000>; + cpu = <&CPU2>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&funnel_core_in_port2>; + }; + }; + }; + }; + + etm3: etm@3f340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f340000 0 0x1000>; + cpu = <&CPU3>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&funnel_core_in_port3>; + }; + }; + }; + }; + + etm4: etm@3f440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f440000 0 0x1000>; + cpu = <&CPU4>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&funnel_core_in_port4>; + }; + }; + }; + }; + + etm5: etm@3f540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f540000 0 0x1000>; + cpu = <&CPU5>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&funnel_core_in_port5>; + }; + }; + }; + }; + + etm6: etm@3f640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f640000 0 0x1000>; + cpu = <&CPU6>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&funnel_core_in_port6>; + }; + }; + }; + }; + + etm7: etm@3f740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f740000 0 0x1000>; + cpu = <&CPU7>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&funnel_core_in_port7>; + }; + }; + }; + }; + + apb@70000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x70000000 0x10000000>; + + uart0: serial@0 { + compatible = "sprd,ums512-uart", + "sprd,sc9836-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart1: serial@100000 { + compatible = "sprd,ums512-uart", + "sprd,sc9836-uart"; + reg = <0x100000 0x100>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + sdio0: mmc@1100000 { + compatible = "sprd,sdhci-r11"; + reg = <0x1100000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "sdio", "enable"; + clocks = <&ap_clk CLK_SDIO0_2X>, + <&apapb_gate CLK_SDIO0_EB>; + assigned-clocks = <&ap_clk CLK_SDIO0_2X>; + assigned-clock-parents = <&pll1 CLK_RPLL>; + status = "disabled"; + }; + + sdio3: mmc@1400000 { + compatible = "sprd,sdhci-r11"; + reg = <0x1400000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "sdio", "enable"; + clocks = <&ap_clk CLK_EMMC_2X>, + <&apapb_gate CLK_EMMC_EB>; + assigned-clocks = <&ap_clk CLK_EMMC_2X>; + assigned-clock-parents = <&pll1 CLK_RPLL>; + status = "disabled"; + }; + }; + + aon: bus@32000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x32000000 0x1000000>; + + adi_bus: spi@100000 { + compatible = "sprd,ums512-adi"; + reg = <0x100000 0x100000>; + #address-cells = <1>; + #size-cells = <0>; + sprd,hw-channels = <2 0x18cc>, <3 0x18cc>, <13 0x1854>, <15 0x1874>, + <17 0x1844>,<19 0x1844>, <21 0x1864>, <30 0x1820>, + <35 0x19b8>, <39 0x19ac>; + }; + }; + }; + + ext_26m: clk-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "ext-26m"; + }; + + ext_32k: clk-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ext-32k"; + }; + + ext_4m: clk-4m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <4000000>; + clock-output-names = "ext-4m"; + }; + + rco_100m: clk-100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "rco-100m"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 6acd12409d59..c83c9d772b81 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -9,7 +9,9 @@ # alphabetically. # Boards with AM62x SoC +dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb # Boards with AM62Ax SoC dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb @@ -28,11 +30,13 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb # Boards with J7200 SoC -dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb +k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm.dtb # Boards with J721e SoC +k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb -dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb # Boards with J721s2 SoC diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts new file mode 100644 index 000000000000..4b94f7a86316 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AM62x LP SK: https://www.ti.com/tool/SK-AM62-LP + * + * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am62x-sk-common.dtsi" + +/ { + compatible = "ti,am62-lp-sk", "ti,am625"; + model = "Texas Instruments AM62x LP SK"; + + vmain_pd: regulator-0 { + /* TPS65988 PD CONTROLLER OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "vmain_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_5v0: regulator-1 { + /* Output of TPS630702RNMR */ + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_sys: regulator-2 { + /* output of LM61460-Q1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-3 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vcc_3v3_sys>; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + }; + + vddshv_sdio: regulator-4 { + compatible = "regulator-gpio"; + regulator-name = "vddshv_sdio"; + pinctrl-names = "default"; + pinctrl-0 = <&vddshv_sdio_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&ldo1_reg>; + gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; +}; + +&main_pmx0 { + vddshv_sdio_pins_default: vddshv-sdio-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ + >; + }; + + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */ + >; + }; + + pmic_irq_pins_default: pmic-irq-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (B16) EXTINTn */ + >; + }; +}; + +&main_i2c1 { + exp1: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", + "PRU_DETECT", "MMC1_SD_EN", + "VPP_LDO_EN", "EXP_PS_3V3_En", + "EXP_PS_5V0_En", "EXP_HAT_DETECT", + "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn", + "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC", + "GPIO_HDMI_RSTn", "CSI_GPIO0", + "CSI_GPIO1", "GPIO_OLDI_INT", + "HDMI_INTn", "TEST_GPIO2", + "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", + "MCASP1_FET_SEL", "UART1_FET_SEL", + "", "IO_EXP_TEST_LED"; + + interrupt-parent = <&main_gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + }; + + exp2: gpio@23 { + compatible = "ti,tca6424"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "", "", + "", "", + "", "", + "", "", + "WL_LT_EN", "CSI_RSTz", + "", "", + "", "", + "", "", + "SPI0_FET_SEL", "SPI0_FET_OE", + "GPIO_OLDI_RSTn", "PRU_3V3_EN", + "", "", + "CSI_VLDO_SEL", "SOC_WLAN_SDIO_RST"; + }; +}; + +&sdhci1 { + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vddshv_sdio>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&main_i2c0 { + tps65219: pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vcc_3v3_sys>; + buck2-supply = <&vcc_3v3_sys>; + buck3-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&buck2_reg>; + ldo3-supply = <&vcc_3v3_sys>; + ldo4-supply = <&vcc_3v3_sys>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VCC1V8_SYS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_LPDDR4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDDAR_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&tlv320aic3106 { + DVDD-supply = <&buck2_reg>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index ea683fd77d6a..b3e4857bbbe4 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -461,7 +461,7 @@ <193>, <194>, <195>; interrupt-controller; #interrupt-cells = <2>; - ti,ngpio = <87>; + ti,ngpio = <92>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 77 0>; @@ -478,7 +478,7 @@ <183>, <184>, <185>; interrupt-controller; #interrupt-cells = <2>; - ti,ngpio = <88>; + ti,ngpio = <52>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 78 0>; @@ -758,6 +758,51 @@ status = "disabled"; }; + main_rti0: watchdog@e000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e000000 0x00 0x100>; + clocks = <&k3_clks 125 0>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 125 0>; + assigned-clock-parents = <&k3_clks 125 2>; + }; + + main_rti1: watchdog@e010000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e010000 0x00 0x100>; + clocks = <&k3_clks 126 0>; + power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 126 0>; + assigned-clock-parents = <&k3_clks 126 2>; + }; + + main_rti2: watchdog@e020000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e020000 0x00 0x100>; + clocks = <&k3_clks 127 0>; + power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 127 0>; + assigned-clock-parents = <&k3_clks 127 2>; + }; + + main_rti3: watchdog@e030000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e030000 0x00 0x100>; + clocks = <&k3_clks 128 0>; + power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 128 0>; + assigned-clock-parents = <&k3_clks 128 2>; + }; + + main_rti15: watchdog@e0f0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e0f0000 0x00 0x100>; + clocks = <&k3_clks 130 0>; + power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 130 0>; + assigned-clock-parents = <&k3_clks 130 2>; + }; + epwm0: pwm@23000000 { compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; @@ -787,4 +832,64 @@ clock-names = "tbclk", "fck"; status = "disabled"; }; + + mcasp0: audio-controller@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b00000 0x00 0x2000>, + <0x00 0x02b08000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 190 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 190 0>; + assigned-clock-parents = <&k3_clks 190 2>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp1: audio-controller@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b10000 0x00 0x2000>, + <0x00 0x02b18000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 191 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 191 0>; + assigned-clock-parents = <&k3_clks 191 2>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp2: audio-controller@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b20000 0x00 0x2000>, + <0x00 0x02b28000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 192 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 192 0>; + assigned-clock-parents = <&k3_clks 192 2>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi index a427231527c3..076601a41e84 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -130,4 +130,15 @@ clocks = <&k3_clks 79 0>; clock-names = "gpio"; }; + + mcu_rti0: watchdog@4880000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x04880000 0x00 0x100>; + clocks = <&k3_clks 131 0>; + power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 131 0>; + assigned-clock-parents = <&k3_clks 131 2>; + /* Tightly coupled to M4F */ + status = "reserved"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi index 38dced6b4fef..7726ebae2539 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi @@ -40,4 +40,25 @@ clock-names = "fck"; status = "disabled"; }; + + wkup_rtc0: rtc@2b1f0000 { + compatible = "ti,am62-rtc"; + reg = <0x00 0x2b1f0000 0x00 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 117 6> , <&k3_clks 117 0>; + clock-names = "vbus", "osc32k"; + power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>; + wakeup-source; + }; + + wkup_rti0: watchdog@2b000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2b000000 0x00 0x100>; + clocks = <&k3_clks 132 0>; + power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 132 0>; + assigned-clock-parents = <&k3_clks 132 2>; + /* Used by DM firmware */ + status = "reserved"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi index 37fcbe7a3c33..a401f5225243 100644 --- a/arch/arm64/boot/dts/ti/k3-am62.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi @@ -8,9 +8,10 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 AM625 SoC"; compatible = "ti,am625"; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts new file mode 100644 index 000000000000..cb46c38ce2cc --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -0,0 +1,758 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * https://beagleplay.org/ + * + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "k3-am625.dtsi" + +/ { + compatible = "beagle,am625-beagleplay", "ti,am625"; + model = "BeagleBoard.org BeaglePlay"; + + aliases { + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; + gpio0 = &main_gpio0; + gpio1 = &main_gpio1; + gpio2 = &mcu_gpio0; + i2c0 = &main_i2c0; + i2c1 = &main_i2c1; + i2c2 = &main_i2c2; + i2c3 = &main_i2c3; + i2c4 = &wkup_i2c0; + i2c5 = &mcu_i2c0; + mdio-gpio0 = &mdio0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + rtc0 = &rtc; + serial0 = &main_uart5; + serial1 = &main_uart6; + serial2 = &main_uart0; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops: ramoops@9ca00000 { + compatible = "ramoops"; + reg = <0x00 0x9c700000 0x00 0x00100000>; + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x00>; + pmsg-size = <0x8000>; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0xc00000>; + no-map; + }; + }; + + vsys_5v0: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3: regulator-2 { + /* output of TLV62595DMQR-U12 */ + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_5v0>; + regulator-always-on; + regulator-boot-on; + }; + + wlan_en: regulator-3 { + /* OUTPUT of SN74AVC2T244DQMR */ + compatible = "regulator-fixed"; + regulator-name = "wlan_en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + regulator-always-on; + vin-supply = <&vdd_3v3>; + gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_pins_default>; + }; + + vdd_3v3_sd: regulator-4 { + /* output of TPS22918DBVR-U21 */ + pinctrl-names = "default"; + pinctrl-0 = <&vdd_3v3_sd_pins_default>; + + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + vin-supply = <&vdd_3v3>; + gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv: regulator-5 { + compatible = "regulator-gpio"; + regulator-name = "sd_hs200_switch"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&ldo1_reg>; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "off"; + }; + + led-1 { + gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + function = LED_FUNCTION_DISK_ACTIVITY; + default-state = "keep"; + }; + + led-2 { + gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CPU; + }; + + led-3 { + gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_LAN; + }; + + led-4 { + gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_WLAN; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&usr_button_pins_default>; + + usr: button-usr { + label = "User Key"; + linux,code = <BTN_0>; + gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>; + }; + + }; + + /* Workaround for errata i2329 - just use mdio bitbang */ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_pins_default>; + gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */ + <&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + }; + + cpsw3g_phy1: ethernet-phy@1 { + reg = <1>; + reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <25>; + reset-deassert-us = <60000>; /* T2 */ + }; + }; +}; + +&main_pmx0 { + gpio0_pins_default: gpio0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */ + AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */ + AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */ + AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */ + AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */ + AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */ + AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */ + AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */ + AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */ + AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */ + AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */ + AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */ + AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */ + AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ + >; + }; + + usr_button_pins_default: usr-button-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */ + >; + }; + + grove_pins_default: grove-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ + AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ + >; + }; + + local_i2c_pins_default: local-i2c-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ + AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ + >; + }; + + i2c2_1v8_pins_default: i2c2-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ + AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + mdio0_pins_default: mdio0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */ + AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */ + >; + }; + + rgmii1_pins_default: rgmii1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ + AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ + AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ + AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ + AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ + AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ + AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ + AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ + AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ + AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ + AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ + AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ + >; + }; + + emmc_pins_default: emmc-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + + vdd_3v3_sd_pins_default: vdd-3v3-sd-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */ + >; + }; + + sd_pins_default: sd-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ + AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ + AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ + AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ + AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ + AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ + AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */ + >; + }; + + wifi_pins_default: wifi-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */ + AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */ + AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */ + AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */ + AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */ + AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */ + AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */ + AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */ + >; + }; + + wifi_en_pins_default: wifi-en-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */ + >; + }; + + wifi_wlirq_pins_default: wifi-wlirq-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */ + >; + }; + + spe_pins_default: spe-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */ + AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */ + AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */ + AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */ + AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */ + AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */ + AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */ + AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */ + AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */ + AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */ + AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */ + >; + }; + + mikrobus_i2c_pins_default: mikrobus-i2c-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */ + AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */ + >; + }; + + mikrobus_uart_pins_default: mikrobus-uart-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */ + AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */ + >; + }; + + mikrobus_spi_pins_default: mikrobus-spi-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */ + AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */ + AM62X_IOPAD(0x0194, PIN_INPUT, 1) /* (B19) MCASP0_AXR3.SPI2_D0 */ + AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */ + >; + }; + + mikrobus_gpio_pins_default: mikrobus-gpio-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */ + AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */ + AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */ + >; + }; + + console_pins_default: console-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ + AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + >; + }; + + wifi_debug_uart_pins_default: wifi-debug-uart-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */ + AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */ + >; + }; + + usb1_pins_default: usb1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */ + >; + }; + + pmic_irq_pins_default: pmic-irq-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */ + >; + }; +}; + +&mcu_pmx0 { + i2c_qwiic_pins_default: i2c-qwiic-pins-default { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ + AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ + >; + }; + + gbe_pmx_obsclk: gbe-pmx-clk-default { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */ + >; + }; + + i2c_csi_pins_default: i2c-csi-pins-default { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */ + AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */ + >; + }; + + wifi_32k_clk: mcu-clk-out-pins-default { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */ + >; + }; +}; + +&a53_opp_table { + /* Requires VDD_CORE to be at 0.85V */ + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + }; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_csi_pins_default>; + clock-frequency = <400000>; + /* Enable with overlay for camera sensor */ +}; + +&mcu_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_qwiic_pins_default>; + clock-frequency = <100000>; + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; +}; + +&usbss1 { + ti,vbus-divider; + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_default>; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>, <&spe_pins_default>, + <&gbe_pmx_obsclk>; + assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>; + assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + phy-mode = "rmii"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw3g_mdio { + /* Workaround for errata i2329 - Use mdio bitbang */ + status = "disabled"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_pins_default>; + gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT", /* 0-2 */ + "USR0", "USR1", "USR2", "USR3", "", "", "USR4", /* 3-9 */ + "EEPROM_WP", /* 10 */ + "CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2", /* 11-12 */ + "CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "", /* 13-17 */ + "USR_BUTTON", "", "", "", "", "", "", "", "", /* 18-26 */ + "", "", "", "", "", "", "", "", "", "HDMI_INT", /* 27-36 */ + "", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */ + "", "", "", "", "", "", "", "", "", "", "", "", /* 43-54 */ + "", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */ + "", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */ + "", "", "", "", "", "", /* 79-84 */ + "BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK", /* 85-86 */ + "", "", "", "", ""; /* 87-91 */ +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&mikrobus_gpio_pins_default>; + gpio-line-names = "", "", "", "", "", /* 0-4 */ + "SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7", /* 5-7 */ + "MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9", /* 8-9 */ + "MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11", /* 10-11 */ + "MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0", /* 12-13 */ + "MIKROBUS_GPIO1_14", /* 14 */ + "", "", "", "", "VDD_3V3_SD", "", "", /* 15-21 */ + "MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23", /* 22-23 */ + "MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25", /* 24-25 */ + "", "", "", "", "", "", "", "", "", "", "", "", /* 26-37 */ + "", "", "", "", "", "", "", "", "", "", /* 38-47 */ + "SD_CD", "SD_VOLT_SEL", "", ""; /* 48-51 */ +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&local_i2c_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + rtc: rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + interrupt-parent = <&main_gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; + + tps65219: pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vsys_5v0>; + buck2-supply = <&vsys_5v0>; + buck3-supply = <&vsys_5v0>; + ldo1-supply = <&vdd_3v3>; + ldo2-supply = <&buck2_reg>; + ldo3-supply = <&vdd_3v3>; + ldo4-supply = <&vdd_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + system-power-controller; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* + * Regulator is left as is unused, vdd_sd + * is controlled via GPIO with bypass config + * as per the NVM configuration + */ + regulator-name = "VDD_SD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDDA_0V85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDD_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&grove_pins_default>; + clock-frequency = <100000>; + status = "okay"; +}; + +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_1v8_pins_default>; + clock-frequency = <100000>; + status = "okay"; +}; + +&main_i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&mikrobus_i2c_pins_default>; + clock-frequency = <400000>; + status = "okay"; +}; + +&main_spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mikrobus_spi_pins_default>; + status = "okay"; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + status = "okay"; +}; + +&sdhci1 { + /* SD/MMC */ + pinctrl-names = "default"; + pinctrl-0 = <&sd_pins_default>; + + vmmc-supply = <&vdd_3v3_sd>; + vqmmc-supply = <&vdd_sd_dv>; + ti,driver-strength-ohm = <50>; + disable-wp; + cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; + cd-debounce-delay-ms = <100>; + ti,fails-without-test-cd; + status = "okay"; +}; + +&sdhci2 { + vmmc-supply = <&wlan_en>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>; + bus-width = <4>; + non-removable; + ti,fails-without-test-cd; + cap-power-off-card; + keep-power-in-suspend; + ti,driver-strength-ohm = <50>; + assigned-clocks = <&k3_clks 157 158>; + assigned-clock-parents = <&k3_clks 157 160>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1807"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_wlirq_pins_default>; + interrupt-parent = <&main_gpio0>; + interrupts = <41 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&console_pins_default>; + status = "okay"; +}; + +&main_uart1 { + /* Main UART1 is used by TIFS firmware */ + status = "reserved"; +}; + +&main_uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&mikrobus_uart_pins_default>; + status = "okay"; +}; + +&main_uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&wifi_debug_uart_pins_default>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 6bc7d63cf52f..2a1adda9bff6 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -7,32 +7,12 @@ /dts-v1/; -#include <dt-bindings/leds/common.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/net/ti-dp83867.h> -#include "k3-am625.dtsi" +#include "k3-am62x-sk-common.dtsi" / { compatible = "ti,am625-sk", "ti,am625"; model = "Texas Instruments AM625 SK"; - aliases { - serial2 = &main_uart0; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - mmc2 = &sdhci2; - spi0 = &ospi0; - ethernet0 = &cpsw_port1; - ethernet1 = &cpsw_port2; - usb0 = &usb0; - usb1 = &usb1; - }; - - chosen { - stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; - }; - opp-table { /* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */ opp-1400000000 { @@ -49,39 +29,6 @@ }; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - ramoops@9ca00000 { - compatible = "ramoops"; - reg = <0x00 0x9ca00000 0x00 0x00100000>; - record-size = <0x8000>; - console-size = <0x8000>; - ftrace-size = <0x00>; - pmsg-size = <0x8000>; - }; - - secure_tfa_ddr: tfa@9e780000 { - reg = <0x00 0x9e780000 0x00 0x80000>; - alignment = <0x1000>; - no-map; - }; - - secure_ddr: optee@9e800000 { - reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ - alignment = <0x1000>; - no-map; - }; - - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { - compatible = "shared-dma-pool"; - reg = <0x00 0x9db00000 0x00 0xc00000>; - no-map; - }; - }; - vmain_pd: regulator-0 { /* TPS65988 PD CONTROLLER OUTPUT */ compatible = "regulator-fixed"; @@ -141,107 +88,19 @@ <3300000 0x1>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&usr_led_pins_default>; - - led-0 { - label = "am62-sk:green:heartbeat"; - gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - function = LED_FUNCTION_HEARTBEAT; - default-state = "off"; - }; + vcc_1v8: regulator-5 { + /* output of TPS6282518DMQ */ + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3_sys>; + regulator-always-on; + regulator-boot-on; }; }; &main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ - AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ - >; - }; - - main_i2c0_pins_default: main-i2c0-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ - AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ - >; - }; - - main_i2c1_pins_default: main-i2c1-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ - AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ - >; - }; - - main_i2c2_pins_default: main-i2c2-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ - AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ - >; - }; - - main_mmc0_pins_default: main-mmc0-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ - AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ - AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ - AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */ - AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */ - AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */ - AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */ - AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */ - AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */ - AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */ - >; - }; - - main_mmc1_pins_default: main-mmc1-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ - AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ - AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ - AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ - AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ - AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ - AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */ - >; - }; - - usr_led_pins_default: usr-led-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ - >; - }; - - main_mdio1_pins_default: main-mdio1-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ - AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ - >; - }; - - main_rgmii1_pins_default: main-rgmii1-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ - AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ - AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ - AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ - AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ - AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ - AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ - AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ - AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ - AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ - AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ - AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ - >; - }; - main_rgmii2_pins_default: main-rgmii2-pins-default { pinctrl-single,pins = < AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ @@ -286,43 +145,9 @@ AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ >; }; - - main_usb1_pins_default: main-usb1-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ - >; - }; -}; - -&wkup_uart0 { - /* WKUP UART0 is used by DM firmware */ - status = "reserved"; -}; - -&main_uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; -}; - -&main_uart1 { - /* Main UART1 is used by TIFS firmware */ - status = "reserved"; -}; - -&main_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; }; &main_i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <400000>; - exp1: gpio@22 { compatible = "ti,tca6424"; reg = <0x22>; @@ -351,23 +176,9 @@ }; }; -&sdhci0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - &sdhci1 { - /* SD/MMC */ - status = "okay"; vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv>; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; - disable-wp; }; &cpsw3g { @@ -376,28 +187,12 @@ &main_rgmii2_pins_default>; }; -&cpsw_port1 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy0>; -}; - &cpsw_port2 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy1>; }; &cpsw3g_mdio { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_mdio1_pins_default>; - - cpsw3g_phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - ti,min-output-impedance; - }; - cpsw3g_phy1: ethernet-phy@1 { reg = <1>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; @@ -473,21 +268,6 @@ }; }; -&usbss0 { - status = "okay"; - ti,vbus-divider; -}; - -&usbss1 { - status = "okay"; -}; - -&usb0 { - dr_mode = "peripheral"; -}; - -&usb1 { - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&main_usb1_pins_default>; +&tlv320aic3106 { + DVDD-supply = <&vcc_1v8>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi index acc7f8ab6426..4193c2b3eed6 100644 --- a/arch/arm64/boot/dts/ti/k3-am625.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi @@ -148,7 +148,7 @@ compatible = "cache"; cache-unified; cache-level = <2>; - cache-size = <0x40000>; + cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi index 6eb87c3f9f3c..fe60c9ce21e3 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi @@ -8,9 +8,10 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 AM62A SoC"; compatible = "ti,am62a7"; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index 5c9012141ee2..f6a67f072dca 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -27,8 +27,9 @@ memory@80000000 { device_type = "memory"; - /* 2G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; }; reserved-memory { diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi index 9734549851c0..58f1c43edcf8 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi @@ -97,7 +97,7 @@ compatible = "cache"; cache-unified; cache-level = <2>; - cache-size = <0x40000>; + cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi new file mode 100644 index 000000000000..976f8303c84f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common dtsi for AM62x SK and derivatives + * + * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-am625.dtsi" + +/ { + aliases { + serial2 = &main_uart0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + spi0 = &ospi0; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + }; + + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@9ca00000 { + compatible = "ramoops"; + reg = <0x00 0x9ca00000 0x00 0x00100000>; + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x00>; + pmsg-size = <0x8000>; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0xc00000>; + no-map; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&usr_led_pins_default>; + + led-0 { + label = "am62-sk:green:heartbeat"; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "off"; + }; + }; + + tlv320_mclk: clk-0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12288000>; + }; + + codec_audio: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "AM62x-SKEVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In", + "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&tlv320_mclk>; + }; + }; +}; + +&main_pmx0 { + /* First pad number is ALW package and second is AMC package */ + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */ + AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */ + AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */ + AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */ + >; + }; + + main_i2c2_pins_default: main-i2c2-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */ + AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + main_mmc0_pins_default: main-mmc0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */ + AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */ + AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */ + AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */ + AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */ + AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */ + AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17/C15) MMC1_SDCD */ + >; + }; + + usr_led_pins_default: usr-led-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */ + >; + }; + + main_mdio1_pins_default: main-mdio1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */ + AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */ + >; + }; + + main_rgmii1_pins_default: main-rgmii1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */ + AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */ + AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16/AA17) RGMII1_RD2 */ + AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15/Y15) RGMII1_RD3 */ + AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17/AA16) RGMII1_RXC */ + AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17/W14) RGMII1_RX_CTL */ + AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20/U14) RGMII1_TD0 */ + AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20/AA19) RGMII1_TD1 */ + AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18/Y17) RGMII1_TD2 */ + AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18/AA18) RGMII1_TD3 */ + AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19/W16) RGMII1_TXC */ + AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */ + >; + }; + + main_usb1_pins_default: main-usb1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */ + >; + }; + + main_mcasp1_pins_default: main-mcasp1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24) GPMC0_BE0N_CLE.MCASP1_ACLKX */ + AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */ + AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEN.MCASP1_AXR0 */ + AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23) GPMC0_ADVN_ALE.MCASP1_AXR2 */ + >; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; + +&main_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + +&main_uart1 { + /* Main UART1 is used by TIFS firmware */ + status = "reserved"; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; +}; + +&main_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + tlv320aic3106: audio-codec@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + ai3x-micbias-vg = <1>; /* 2.0V */ + + /* Regulators */ + AVDD-supply = <&vcc_3v3_sys>; + IOVDD-supply = <&vcc_3v3_sys>; + DRVDD-supply = <&vcc_3v3_sys>; + }; +}; + +&sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&sdhci1 { + /* SD/MMC */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&mailbox0_cluster0 { + mbox_m4_0: mbox-m4-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&usbss0 { + status = "okay"; + ti,vbus-divider; +}; + +&usbss1 { + status = "okay"; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "peripheral"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_pins_default>; +}; + +&mcasp1 { + status = "okay"; + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp1_pins_default>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index c858725133af..60fe95b48312 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -8,9 +8,10 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 AM642 SoC"; compatible = "ti,am642"; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index c538a0bf3cdd..3093ef6b9b23 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -8,9 +8,10 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 AM654 SoC"; compatible = "ti,am654"; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 2091cd2431fb..27a43a8ecffd 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -60,7 +60,7 @@ regulator-boot-on; enable-active-high; vin-supply = <&vsys_3v3>; - gpio = <&exp1 10 GPIO_ACTIVE_HIGH>; + gpio = <&exp1 8 GPIO_ACTIVE_HIGH>; }; vdd_sd_dv: regulator-tlv71033 { @@ -264,12 +264,10 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; - gpio-line-names = "CSI_VIO_SEL", "CSI_SEL_FPC_EXPn", "HDMI_PDn", - "HDMI_LS_OE", "DP0_3V3 _EN", "BOARDID_EEPROM_WP", - "CAN_STB", " ", "GPIO_uSD_PWR_EN", "eDP_ENABLE", - "IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_MCU_RGMII_RSTz", - "IO_EXP_CSI2_EXP_RSTz", " ", "CSI0_B_GPIO1", - "CSI1_B_GPIO1"; + gpio-line-names = " ", " ", " ", " ", " ", + "BOARDID_EEPROM_WP", "CAN_STB", " ", + "GPIO_uSD_PWR_EN", " ", "IO_EXP_PCIe1_M.2_RTSz", + "IO_EXP_MCU_RGMII_RST#", " ", " ", " ", " "; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso new file mode 100644 index 000000000000..31b932eebc0a --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT Overlay for CPSW5G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with + * J7200 board. + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mux/ti-serdes.h> + +#include "k3-pinctrl.h" + +&{/} { + aliases { + ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1"; + ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2"; + ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3"; + ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4"; + }; +}; + +&cpsw0 { + status = "okay"; +}; + +&cpsw0_port1 { + status = "okay"; + phy-handle = <&cpsw5g_phy0>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 1>; +}; + +&cpsw0_port2 { + status = "okay"; + phy-handle = <&cpsw5g_phy1>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 2>; +}; + +&cpsw0_port3 { + status = "okay"; + phy-handle = <&cpsw5g_phy2>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 3>; +}; + +&cpsw0_port4 { + status = "okay"; + phy-handle = <&cpsw5g_phy3>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 4>; +}; + +&cpsw5g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_pins_default>; + reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <120000>; + #address-cells = <1>; + #size-cells = <0>; + + cpsw5g_phy0: ethernet-phy@16 { + reg = <16>; + }; + cpsw5g_phy1: ethernet-phy@17 { + reg = <17>; + }; + cpsw5g_phy2: ethernet-phy@18 { + reg = <18>; + }; + cpsw5g_phy3: ethernet-phy@19 { + reg = <19>; + }; +}; + +&exp2 { + qsgmii-line-hog { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "qsgmii-pwrdn-line"; + }; +}; + +&main_pmx0 { + mdio0_pins_default: mdio0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x00a8, PIN_OUTPUT, 5) /* (W19) UART8_TXD.MDIO0_MDC */ + J721E_IOPAD(0x00a4, PIN_INPUT, 5) /* (W14) UART8_RXD.MDIO0_MDIO */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 138381f43ce4..ef352e32f19d 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -39,6 +39,13 @@ <0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */ }; + cpsw0_phy_gmii_sel: phy@4044 { + compatible = "ti,j7200-cpsw5g-phy-gmii-sel"; + ti,qsgmii-main-ports = <1>; + reg = <0x4044 0x10>; + #phy-cells = <1>; + }; + usb_serdes_mux: mux-controller@4000 { compatible = "mmio-mux"; #mux-control-cells = <1>; @@ -304,6 +311,87 @@ }; }; + cpsw0: ethernet@c000000 { + compatible = "ti,j7200-cpswxg-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x00 0xc000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>; + clocks = <&k3_clks 19 33>; + clock-names = "fck"; + power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_udmap 0xca00>, + <&main_udmap 0xca01>, + <&main_udmap 0xca02>, + <&main_udmap 0xca03>, + <&main_udmap 0xca04>, + <&main_udmap 0xca05>, + <&main_udmap 0xca06>, + <&main_udmap 0xca07>, + <&main_udmap 0x4a00>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + cpsw0_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + status = "disabled"; + }; + + cpsw0_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + status = "disabled"; + }; + + cpsw0_port3: port@3 { + reg = <3>; + ti,mac-only; + label = "port3"; + status = "disabled"; + }; + + cpsw0_port4: port@4 { + reg = <4>; + ti,mac-only; + label = "port4"; + status = "disabled"; + }; + }; + + cpsw5g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 19 33>; + clock-names = "fck"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 19 16>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ @@ -777,6 +865,94 @@ clock-names = "gpio"; }; + main_spi0: spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02100000 0x00 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 266 1>; + status = "disabled"; + }; + + main_spi1: spi@2110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02110000 0x00 0x400>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 267 1>; + status = "disabled"; + }; + + main_spi2: spi@2120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02120000 0x00 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 268 1>; + status = "disabled"; + }; + + main_spi3: spi@2130000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02130000 0x00 0x400>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 269 1>; + status = "disabled"; + }; + + main_spi4: spi@2140000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02140000 0x00 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 270 1>; + status = "disabled"; + }; + + main_spi5: spi@2150000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02150000 0x00 0x400>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 271 1>; + status = "disabled"; + }; + + main_spi6: spi@2160000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02160000 0x00 0x400>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 272 1>; + status = "disabled"; + }; + + main_spi7: spi@2170000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02170000 0x00 0x400>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 273 1>; + status = "disabled"; + }; + watchdog0: watchdog@2200000 { compatible = "ti,j7-rti-wdt"; reg = <0x0 0x2200000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index de56a0165bd0..331b4e482e41 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -305,6 +305,39 @@ status = "disabled"; }; + mcu_spi0: spi@40300000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040300000 0x00 0x400>; + interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 274 0>; + status = "disabled"; + }; + + mcu_spi1: spi@40310000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040310000 0x00 0x400>; + interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 275 0>; + status = "disabled"; + }; + + mcu_spi2: spi@40320000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040320000 0x00 0x400>; + interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 276 0>; + status = "disabled"; + }; + fss: syscon@47000000 { compatible = "syscon", "simple-mfd"; reg = <0x00 0x47000000 0x00 0x100>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi index d74f86b0f622..bbe380c72a7e 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 J7200 SoC"; compatible = "ti,j7200"; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso new file mode 100644 index 000000000000..6ff7b6ad33ed --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT Overlay for CPSW9G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with + * J721E board. + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mux/ti-serdes.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/phy/phy-cadence.h> + +#include "k3-pinctrl.h" + +&{/} { + aliases { + ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1"; + ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2"; + ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3"; + ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4"; + }; +}; + +&cpsw0 { + status = "okay"; +}; + +&cpsw0_port1 { + status = "okay"; + phy-handle = <&cpsw9g_phy0>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 1>; +}; + +&cpsw0_port2 { + status = "okay"; + phy-handle = <&cpsw9g_phy1>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 2>; +}; + +&cpsw0_port3 { + status = "okay"; + phy-handle = <&cpsw9g_phy2>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 3>; +}; + +&cpsw0_port4 { + status = "okay"; + phy-handle = <&cpsw9g_phy3>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 4>; +}; + +&cpsw9g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_pins_default>; + reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <120000>; + #address-cells = <1>; + #size-cells = <0>; + + cpsw9g_phy0: ethernet-phy@17 { + reg = <17>; + }; + cpsw9g_phy1: ethernet-phy@16 { + reg = <16>; + }; + cpsw9g_phy2: ethernet-phy@18 { + reg = <18>; + }; + cpsw9g_phy3: ethernet-phy@19 { + reg = <19>; + }; +}; + +&exp2 { + qsgmii-line-hog { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "qsgmii-pwrdn-line"; + }; +}; + +&main_pmx0 { + mdio0_pins_default: mdio0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1bc, PIN_OUTPUT, 0) /* (V24) MDIO0_MDC */ + J721E_IOPAD(0x1b8, PIN_INPUT, 0) /* (V26) MDIO0_MDIO */ + >; + }; +}; + +&serdes_ln_ctrl { + idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_QSGMII_LANE2>, + <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>, + <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>, + <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>, + <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>, + <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&serdes0 { + status = "okay"; + + assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>, <&serdes0 CDNS_SIERRA_PLL_CMNLC1>; + assigned-clock-parents = <&wiz0_pll1_refclk>, <&wiz0_pll1_refclk>; + #address-cells = <1>; + #size-cells = <0>; + + serdes0_qsgmii_link: phy@1 { + reg = <1>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_QSGMII>; + resets = <&serdes_wiz0 2>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index c935622f0102..10c8a5fb4ee2 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -61,6 +61,13 @@ <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>; }; + cpsw0_phy_gmii_sel: phy@4044 { + compatible = "ti,j721e-cpsw9g-phy-gmii-sel"; + ti,qsgmii-main-ports = <2>, <2>; + reg = <0x4044 0x20>; + #phy-cells = <1>; + }; + usb_serdes_mux: mux-controller@4000 { compatible = "mmio-mux"; #mux-control-cells = <1>; @@ -404,6 +411,115 @@ }; }; + cpsw0: ethernet@c000000 { + compatible = "ti,j721e-cpswxg-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0xc000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x0c000000 0x0 0x200000>; + clocks = <&k3_clks 19 89>; + clock-names = "fck"; + power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_udmap 0xca00>, + <&main_udmap 0xca01>, + <&main_udmap 0xca02>, + <&main_udmap 0xca03>, + <&main_udmap 0xca04>, + <&main_udmap 0xca05>, + <&main_udmap 0xca06>, + <&main_udmap 0xca07>, + <&main_udmap 0x4a00>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + cpsw0_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + status = "disabled"; + }; + + cpsw0_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + status = "disabled"; + }; + + cpsw0_port3: port@3 { + reg = <3>; + ti,mac-only; + label = "port3"; + status = "disabled"; + }; + + cpsw0_port4: port@4 { + reg = <4>; + ti,mac-only; + label = "port4"; + status = "disabled"; + }; + + cpsw0_port5: port@5 { + reg = <5>; + ti,mac-only; + label = "port5"; + status = "disabled"; + }; + + cpsw0_port6: port@6 { + reg = <6>; + ti,mac-only; + label = "port6"; + status = "disabled"; + }; + + cpsw0_port7: port@7 { + reg = <7>; + ti,mac-only; + label = "port7"; + status = "disabled"; + }; + + cpsw0_port8: port@8 { + reg = <8>; + ti,mac-only; + label = "port8"; + status = "disabled"; + }; + }; + + cpsw9g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 19 89>; + clock-names = "fck"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 19 16>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + main_crypto: crypto@4e00000 { compatible = "ti,j721e-sa2ul"; reg = <0x0 0x4e00000 0x0 0x1200>; @@ -1180,7 +1296,6 @@ ti,itap-del-sel-mmc-hs = <0xa>; ti,itap-del-sel-ddr52 = <0x3>; ti,trm-icp = <0x8>; - ti,strobe-sel = <0x77>; dma-coherent; }; @@ -2329,4 +2444,92 @@ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; + + main_spi0: spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02100000 0x00 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 266 1>; + status = "disabled"; + }; + + main_spi1: spi@2110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02110000 0x00 0x400>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 267 1>; + status = "disabled"; + }; + + main_spi2: spi@2120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02120000 0x00 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 268 1>; + status = "disabled"; + }; + + main_spi3: spi@2130000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02130000 0x00 0x400>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 269 1>; + status = "disabled"; + }; + + main_spi4: spi@2140000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02140000 0x00 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 270 1>; + status = "disabled"; + }; + + main_spi5: spi@2150000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02150000 0x00 0x400>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 271 1>; + status = "disabled"; + }; + + main_spi6: spi@2160000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02160000 0x00 0x400>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 272 1>; + status = "disabled"; + }; + + main_spi7: spi@2170000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02170000 0x00 0x400>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 273 1>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 8ac78034d5d6..24e8125db8c4 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -425,4 +425,37 @@ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; + + mcu_spi0: spi@40300000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040300000 0x00 0x400>; + interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 274 0>; + status = "disabled"; + }; + + mcu_spi1: spi@40310000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040310000 0x00 0x400>; + interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 275 0>; + status = "disabled"; + }; + + mcu_spi2: spi@40320000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040320000 0x00 0x400>; + interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 276 0>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 4640d280c85c..f650a7fd66b4 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -687,10 +687,6 @@ status = "disabled"; }; -&main_r5fss0_core0{ - firmware-name = "pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f"; -}; - &usb_serdes_mux { idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index 6975cae644d9..b912143b6a11 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 J721E SoC"; compatible = "ti,j721e"; @@ -135,6 +136,7 @@ <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x0c000000 0x00 0x0c000000 0x00 0x0d000000>, /* CPSW9G */ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01800000>, /* PCIe Core*/ <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/ diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index a7aa6cf08acd..b4b9edfe2d12 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -197,6 +197,32 @@ J721S2_WKUP_IOPAD(0x0c8, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */ >; }; + + mcu_adc0_pins_default: mcu-adc0-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (L25) MCU_ADC0_AIN0 */ + J721S2_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN1 */ + J721S2_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (M24) MCU_ADC0_AIN2 */ + J721S2_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (L24) MCU_ADC0_AIN3 */ + J721S2_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (L27) MCU_ADC0_AIN4 */ + J721S2_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN5 */ + J721S2_WKUP_IOPAD(0x14c, PIN_INPUT, 0) /* (M27) MCU_ADC0_AIN6 */ + J721S2_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (M26) MCU_ADC0_AIN7 */ + >; + }; + + mcu_adc1_pins_default: mcu-adc1-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x154, PIN_INPUT, 0) /* (P25) MCU_ADC1_AIN0 */ + J721S2_WKUP_IOPAD(0x158, PIN_INPUT, 0) /* (R25) MCU_ADC1_AIN1 */ + J721S2_WKUP_IOPAD(0x15c, PIN_INPUT, 0) /* (P28) MCU_ADC1_AIN2 */ + J721S2_WKUP_IOPAD(0x160, PIN_INPUT, 0) /* (P27) MCU_ADC1_AIN3 */ + J721S2_WKUP_IOPAD(0x164, PIN_INPUT, 0) /* (N25) MCU_ADC1_AIN4 */ + J721S2_WKUP_IOPAD(0x168, PIN_INPUT, 0) /* (P26) MCU_ADC1_AIN5 */ + J721S2_WKUP_IOPAD(0x16c, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */ + J721S2_WKUP_IOPAD(0x170, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */ + >; + }; }; &main_gpio2 { @@ -309,3 +335,21 @@ pinctrl-0 = <&mcu_mcan1_pins_default>; phys = <&transceiver2>; }; + +&tscadc0 { + pinctrl-0 = <&mcu_adc0_pins_default>; + pinctrl-names = "default"; + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + pinctrl-0 = <&mcu_adc1_pins_default>; + pinctrl-names = "default"; + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 8915132efcc1..2dd7865f7654 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -1014,4 +1014,92 @@ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; + + main_spi0: spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02100000 0x00 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 339 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 339 1>; + status = "disabled"; + }; + + main_spi1: spi@2110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02110000 0x00 0x400>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 340 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 340 1>; + status = "disabled"; + }; + + main_spi2: spi@2120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02120000 0x00 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 341 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 341 1>; + status = "disabled"; + }; + + main_spi3: spi@2130000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02130000 0x00 0x400>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 342 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 342 1>; + status = "disabled"; + }; + + main_spi4: spi@2140000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02140000 0x00 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 343 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 343 1>; + status = "disabled"; + }; + + main_spi5: spi@2150000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02150000 0x00 0x400>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 344 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 344 1>; + status = "disabled"; + }; + + main_spi6: spi@2160000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02160000 0x00 0x400>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 345 1>; + status = "disabled"; + }; + + main_spi7: spi@2170000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02170000 0x00 0x400>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 346 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 346 1>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 0af242aa9816..a353705a7463 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -203,6 +203,39 @@ status = "disabled"; }; + mcu_spi0: spi@40300000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040300000 0x00 0x400>; + interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 347 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 347 0>; + status = "disabled"; + }; + + mcu_spi1: spi@40310000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040310000 0x00 0x400>; + interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 348 0>; + status = "disabled"; + }; + + mcu_spi2: spi@40320000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040320000 0x00 0x400>; + interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 349 0>; + status = "disabled"; + }; + mcu_navss: bus@28380000{ compatible = "simple-mfd"; #address-cells = <2>; @@ -306,4 +339,44 @@ ti,cpts-periodic-outputs = <2>; }; }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40200000 0x00 0x1000>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 0>; + assigned-clocks = <&k3_clks 0 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40210000 0x00 0x1000>; + interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 1 0>; + assigned-clocks = <&k3_clks 1 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7402>, + <&main_udmap 0x7403>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi index 78295ee0fee5..376924726f1f 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi @@ -10,9 +10,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 J721S2 SoC"; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index 8cd4a7ecc121..f33815953e77 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -21,6 +21,7 @@ aliases { serial2 = &main_uart8; + mmc0 = &main_sdhci0; mmc1 = &main_sdhci1; i2c0 = &main_i2c0; }; @@ -140,6 +141,32 @@ }; }; +&wkup_pmx0 { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ + J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ + J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ + J784S4_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ + J784S4_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ + J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ + J784S4_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ + J784S4_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ + J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ + J784S4_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ + J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ + J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-pins-default { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ + J784S4_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ + >; + }; +}; + &main_uart8 { status = "okay"; pinctrl-names = "default"; @@ -181,6 +208,14 @@ }; }; +&main_sdhci0 { + /* eMMC */ + status = "okay"; + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + &main_sdhci1 { /* SD card */ status = "okay"; @@ -194,3 +229,27 @@ &main_gpio0 { status = "okay"; }; + +&mcu_cpsw { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default>; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mdio_pins_default>; + + mcu_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&mcu_cpsw_port1 { + status = "okay"; + phy-mode = "rgmii-rxid"; + phy-handle = <&mcu_phy0>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index 7edf324ac159..e9169eb358c1 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -72,6 +72,25 @@ pinctrl-single,function-mask = <0xffffffff>; }; + main_crypto: crypto@4e00000 { + compatible = "ti,j721e-sa2ul"; + reg = <0x00 0x4e00000 0x00 0x1200>; + power-domains = <&k3_pds 369 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>; + + dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>, + <&main_udmap 0x4a41>; + dma-names = "tx", "rx1", "rx2"; + + rng: rng@4e10000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0x00 0x4e10000 0x00 0x7d>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x200>; @@ -398,6 +417,7 @@ #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; + ti,sci-dev-id = <280>; dma-coherent; dma-ranges; @@ -1004,4 +1024,92 @@ bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; status = "disabled"; }; + + main_spi0: spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02100000 0x00 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 376 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 376 1>; + status = "disabled"; + }; + + main_spi1: spi@2110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02110000 0x00 0x400>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 377 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 377 1>; + status = "disabled"; + }; + + main_spi2: spi@2120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02120000 0x00 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 378 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 378 1>; + status = "disabled"; + }; + + main_spi3: spi@2130000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02130000 0x00 0x400>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 379 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 379 1>; + status = "disabled"; + }; + + main_spi4: spi@2140000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02140000 0x00 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 380 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 380 1>; + status = "disabled"; + }; + + main_spi5: spi@2150000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02150000 0x00 0x400>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 381 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 381 1>; + status = "disabled"; + }; + + main_spi6: spi@2160000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02160000 0x00 0x400>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 382 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 382 1>; + status = "disabled"; + }; + + main_spi7: spi@2170000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02170000 0x00 0x400>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 383 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 383 1>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index 93952af618f6..f04fcb614cbe 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -204,11 +204,45 @@ status = "disabled"; }; + mcu_spi0: spi@40300000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040300000 0x00 0x400>; + interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 384 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 384 0>; + status = "disabled"; + }; + + mcu_spi1: spi@40310000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040310000 0x00 0x400>; + interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 385 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 385 0>; + status = "disabled"; + }; + + mcu_spi2: spi@40320000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040320000 0x00 0x400>; + interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 386 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 386 0>; + status = "disabled"; + }; + mcu_navss: bus@28380000{ compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; + ti,sci-dev-id = <323>; dma-coherent; dma-ranges; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi index 3eb0d0568959..2e03d84da7d2 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi @@ -10,9 +10,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 J784S4 SoC"; compatible = "ti,j784s4"; diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h new file mode 100644 index 000000000000..c97548a3f42d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for pinctrl bindings for TI's K3 SoC + * family. + * + * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ +#ifndef DTS_ARM64_TI_K3_PINCTRL_H +#define DTS_ARM64_TI_K3_PINCTRL_H + +#define PULLUDEN_SHIFT (16) +#define PULLTYPESEL_SHIFT (17) +#define RXACTIVE_SHIFT (18) + +#define PULL_DISABLE (1 << PULLUDEN_SHIFT) +#define PULL_ENABLE (0 << PULLUDEN_SHIFT) + +#define PULL_UP (1 << PULLTYPESEL_SHIFT | PULL_ENABLE) +#define PULL_DOWN (0 << PULLTYPESEL_SHIFT | PULL_ENABLE) + +#define INPUT_EN (1 << RXACTIVE_SHIFT) +#define INPUT_DISABLE (0 << RXACTIVE_SHIFT) + +/* Only these macros are expected be used directly in device tree files */ +#define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE) +#define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP) +#define PIN_OUTPUT_PULLDOWN (INPUT_DISABLE | PULL_DOWN) +#define PIN_INPUT (INPUT_EN | PULL_DISABLE) +#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN) + +#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define AM64X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM64X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define AM65X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM65X_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define J721E_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J721E_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define J721S2_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J721S2_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define J784S4_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J784S4_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#endif diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi index 0fc32c036f30..b04829b3175d 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi @@ -485,7 +485,7 @@ <0x0 0x28050000 0x0 0x00010000>, <0x0 0x24200000 0x0 0x00002000>, <0x0 0x24162000 0x0 0x00001000>; - reg-names = "dbi", "config", "ulreg", "smu", "mpu"; + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; device_type = "pci"; bus-range = <0x00 0xff>; num-lanes = <2>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 7790ee42c68a..a24609e14d50 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -273,6 +273,8 @@ CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_NVME=m CONFIG_QCOM_COINCELL=m CONFIG_QCOM_FASTRPC=m +CONFIG_BATTERY_QCOM_BATTMGR=m +CONFIG_UCSI_PMIC_GLINK=m CONFIG_SRAM=y CONFIG_PCI_ENDPOINT_TEST=m CONFIG_EEPROM_AT24=m @@ -367,11 +369,13 @@ CONFIG_AT803X_PHY=y CONFIG_REALTEK_PHY=y CONFIG_ROCKCHIP_PHY=y CONFIG_DP83867_PHY=y +CONFIG_DP83TD510_PHY=y CONFIG_VITESSE_PHY=y CONFIG_CAN_FLEXCAN=m CONFIG_CAN_RCAR=m CONFIG_CAN_RCAR_CANFD=m CONFIG_CAN_MCP251XFD=m +CONFIG_MDIO_GPIO=y CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y CONFIG_MDIO_BUS_MUX_MMIOREG=y CONFIG_USB_PEGASUS=m @@ -418,6 +422,7 @@ CONFIG_TOUCHSCREEN_EDT_FT5X06=m CONFIG_INPUT_MISC=y CONFIG_INPUT_PM8941_PWRKEY=y CONFIG_INPUT_PM8XXX_VIBRATOR=m +CONFIG_INPUT_TPS65219_PWRBUTTON=m CONFIG_INPUT_PWM_BEEPER=m CONFIG_INPUT_PWM_VIBRA=m CONFIG_INPUT_HISI_POWERKEY=y @@ -463,6 +468,8 @@ CONFIG_VIRTIO_CONSOLE=y CONFIG_IPMI_HANDLER=m CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_VIRTIO=y CONFIG_TCG_TPM=y CONFIG_TCG_TIS=m CONFIG_TCG_TIS_SPI=m @@ -513,6 +520,7 @@ CONFIG_SPI_MESON_SPICC=m CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_MT65XX=y CONFIG_SPI_MTK_NOR=m +CONFIG_SPI_OMAP24XX=m CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_ROCKCHIP=y @@ -545,7 +553,9 @@ CONFIG_PINCTRL_IMX8ULP=y CONFIG_PINCTRL_IMX93=y CONFIG_PINCTRL_MSM=y CONFIG_PINCTRL_IPQ8074=y +CONFIG_PINCTRL_IPQ5332=y CONFIG_PINCTRL_IPQ6018=y +CONFIG_PINCTRL_IPQ9574=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8953=y CONFIG_PINCTRL_MSM8976=y @@ -556,19 +566,29 @@ CONFIG_PINCTRL_QCM2290=y CONFIG_PINCTRL_QCS404=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_QDU1000=y CONFIG_PINCTRL_SA8775P=y CONFIG_PINCTRL_SC7180=y CONFIG_PINCTRL_SC7280=y +CONFIG_PINCTRL_SC7280_LPASS_LPI=m CONFIG_PINCTRL_SC8180X=y CONFIG_PINCTRL_SC8280XP=y +CONFIG_PINCTRL_SDM660=y +CONFIG_PINCTRL_SDM670=y CONFIG_PINCTRL_SDM845=y CONFIG_PINCTRL_SM6115=y +CONFIG_PINCTRL_SM6125=y +CONFIG_PINCTRL_SM6350=y +CONFIG_PINCTRL_SM6375=y CONFIG_PINCTRL_SM8150=y CONFIG_PINCTRL_SM8250=y CONFIG_PINCTRL_SM8250_LPASS_LPI=m CONFIG_PINCTRL_SM8350=y CONFIG_PINCTRL_SM8450=y +CONFIG_PINCTRL_SM8450_LPASS_LPI=m +CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m CONFIG_PINCTRL_SM8550=y +CONFIG_PINCTRL_SM8550_LPASS_LPI=m CONFIG_PINCTRL_LPASS_LPI=m CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DAVINCI=y @@ -594,6 +614,7 @@ CONFIG_POWER_RESET_QCOM_PON=m CONFIG_POWER_RESET_XGENE=y CONFIG_POWER_RESET_SYSCON=y CONFIG_SYSCON_REBOOT_MODE=y +CONFIG_NVMEM_REBOOT_MODE=m CONFIG_BATTERY_SBS=m CONFIG_BATTERY_BQ27XXX=y CONFIG_BATTERY_MAX17042=m @@ -670,6 +691,8 @@ CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_SL28CPLD=y +CONFIG_MFD_TPS65219=y +CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_ROHM_BD718XX=y CONFIG_MFD_WCD934X=m CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -699,6 +722,7 @@ CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_TPS65132=m +CONFIG_REGULATOR_TPS65219=y CONFIG_REGULATOR_VCTRL=m CONFIG_RC_CORE=m CONFIG_RC_DECODERS=y @@ -871,7 +895,9 @@ CONFIG_SND_SOC_TEGRA210_AMX=m CONFIG_SND_SOC_TEGRA210_ADX=m CONFIG_SND_SOC_TEGRA210_MIXER=m CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m +CONFIG_SND_SOC_DAVINCI_MCASP=m CONFIG_SND_SOC_AK4613=m +CONFIG_SND_SOC_DA7213=m CONFIG_SND_SOC_ES7134=m CONFIG_SND_SOC_ES7241=m CONFIG_SND_SOC_GTM601=m @@ -885,6 +911,7 @@ CONFIG_SND_SOC_SIMPLE_MUX=m CONFIG_SND_SOC_TAS2552=m CONFIG_SND_SOC_TAS571X=m CONFIG_SND_SOC_TLV320AIC32X4_I2C=m +CONFIG_SND_SOC_TLV320AIC3X_I2C=m CONFIG_SND_SOC_WCD9335=m CONFIG_SND_SOC_WCD934X=m CONFIG_SND_SOC_WM8524=m @@ -908,6 +935,7 @@ CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PCI_RENESAS=m +CONFIG_USB_XHCI_RZV2M=y CONFIG_USB_XHCI_TEGRA=y CONFIG_USB_BRCMSTB=m CONFIG_USB_EHCI_HCD=y @@ -943,6 +971,7 @@ CONFIG_USB_ONBOARD_HUB=m CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m +CONFIG_USB_RZV2M_USB3DRD=y CONFIG_USB_RENESAS_USB3=m CONFIG_USB_TEGRA_XUDC=m CONFIG_USB_CONFIGFS=m @@ -1026,6 +1055,7 @@ CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_PCF85063=m CONFIG_RTC_DRV_PCF85363=m CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_RV3028=m CONFIG_RTC_DRV_RV8803=m @@ -1045,6 +1075,7 @@ CONFIG_RTC_DRV_SNVS=m CONFIG_RTC_DRV_IMX_SC=m CONFIG_RTC_DRV_MT6397=m CONFIG_RTC_DRV_XGENE=y +CONFIG_RTC_DRV_TI_K3=m CONFIG_DMADEVICES=y CONFIG_DMA_BCM2835=y CONFIG_DMA_SUN6I=m @@ -1122,11 +1153,15 @@ CONFIG_QCOM_CLK_APCS_MSM8916=y CONFIG_QCOM_CLK_APCC_MSM8996=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y +CONFIG_IPQ_GCC_5332=y CONFIG_IPQ_GCC_6018=y CONFIG_IPQ_GCC_8074=y +CONFIG_IPQ_GCC_9574=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y -CONFIG_MSM_MMCC_8996=y +CONFIG_MSM_MMCC_8994=m +CONFIG_MSM_MMCC_8996=m +CONFIG_MSM_MMCC_8998=m CONFIG_MSM_GCC_8998=y CONFIG_QCS_GCC_404=y CONFIG_SA_GCC_8775P=y @@ -1217,7 +1252,6 @@ CONFIG_QCOM_APR=m CONFIG_QCOM_ICC_BWMON=m CONFIG_ARCH_R8A77995=y CONFIG_ARCH_R8A77990=y -CONFIG_ARCH_R8A77950=y CONFIG_ARCH_R8A77951=y CONFIG_ARCH_R8A77965=y CONFIG_ARCH_R8A77960=y @@ -1252,6 +1286,7 @@ CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_RENESAS_RPCIF=m CONFIG_IIO=y CONFIG_EXYNOS_ADC=y +CONFIG_IMX93_ADC=m CONFIG_MAX9611=m CONFIG_MEDIATEK_MT6577_AUXADC=m CONFIG_QCOM_SPMI_VADC=m @@ -1259,6 +1294,7 @@ CONFIG_QCOM_SPMI_ADC5=m CONFIG_ROCKCHIP_SARADC=m CONFIG_RZG2L_ADC=m CONFIG_TI_ADS1015=m +CONFIG_TI_AM335X_ADC=m CONFIG_IIO_CROS_EC_SENSORS_CORE=m CONFIG_IIO_CROS_EC_SENSORS=m CONFIG_IIO_ST_LSM6DSX=m @@ -1292,6 +1328,7 @@ CONFIG_RESET_QCOM_PDC=m CONFIG_RESET_RZG2L_USBPHY_CTRL=y CONFIG_RESET_TI_SCI=y CONFIG_PHY_XGENE=y +CONFIG_PHY_CAN_TRANSCEIVER=m CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_CADENCE_TORRENT=m CONFIG_PHY_CADENCE_SIERRA=m @@ -1303,9 +1340,11 @@ CONFIG_PHY_HISI_INNO_USB2=y CONFIG_PHY_MVEBU_CP110_COMPHY=y CONFIG_PHY_MTK_TPHY=y CONFIG_PHY_QCOM_EDP=m +CONFIG_PHY_QCOM_EUSB2_REPEATER=m CONFIG_PHY_QCOM_PCIE2=m CONFIG_PHY_QCOM_QMP=m CONFIG_PHY_QCOM_QUSB2=m +CONFIG_PHY_QCOM_SNPS_EUSB2=m CONFIG_PHY_QCOM_USB_HS=m CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m CONFIG_PHY_QCOM_USB_HS_28NM=m @@ -1329,6 +1368,7 @@ CONFIG_PHY_J721E_WIZ=m CONFIG_ARM_CCI_PMU=m CONFIG_ARM_CCN=m CONFIG_ARM_CMN=m +CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m CONFIG_ARM_SMMU_V3_PMU=m CONFIG_ARM_DSU_PMU=m CONFIG_FSL_IMX8_DDR_PMU=m @@ -1415,6 +1455,7 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_SECURITY=y CONFIG_CRYPTO_USER=y +CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_ANSI_CPRNG=y @@ -1440,6 +1481,7 @@ CONFIG_CRYPTO_DEV_HISI_SEC2=m CONFIG_CRYPTO_DEV_HISI_ZIP=m CONFIG_CRYPTO_DEV_HISI_HPRE=m CONFIG_CRYPTO_DEV_HISI_TRNG=m +CONFIG_CRYPTO_DEV_SA2UL=m CONFIG_DMA_RESTRICTED_POOL=y CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y diff --git a/arch/arm64/configs/virt.config b/arch/arm64/configs/virt.config index 6ef0a739717f..6865d54e68f8 100644 --- a/arch/arm64/configs/virt.config +++ b/arch/arm64/configs/virt.config @@ -1,3 +1,7 @@ +# +# Base options for platforms +# + # CONFIG_ARCH_ACTIONS is not set # CONFIG_ARCH_SUNXI is not set # CONFIG_ARCH_ALPINE is not set @@ -37,3 +41,20 @@ # CONFIG_ARCH_VISCONTI is not set # CONFIG_ARCH_XGENE is not set # CONFIG_ARCH_ZYNQMP is not set + +# +# Subsystems which can't be used in mach-virt +# +# CONFIG_CHROME_PLATFORMS is not set +# CONFIG_EXTCON is not set +# CONFIG_IIO is not set +# CONFIG_MTD is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_PWM is not set +# CONFIG_REGULATOR is not set +# CONFIG_SLIMBUS is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUNDWIRE is not set +# CONFIG_SPI is not set +# CONFIG_SURFACE_PLATFORMS is not set +# CONFIG_THERMAL is not set diff --git a/arch/arm64/crypto/aes-neonbs-core.S b/arch/arm64/crypto/aes-neonbs-core.S index 7278a37c2d5c..baf450717b24 100644 --- a/arch/arm64/crypto/aes-neonbs-core.S +++ b/arch/arm64/crypto/aes-neonbs-core.S @@ -15,6 +15,7 @@ */ #include <linux/linkage.h> +#include <linux/cfi_types.h> #include <asm/assembler.h> .text @@ -620,12 +621,12 @@ SYM_FUNC_END(aesbs_decrypt8) .endm .align 4 -SYM_FUNC_START(aesbs_ecb_encrypt) +SYM_TYPED_FUNC_START(aesbs_ecb_encrypt) __ecb_crypt aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5 SYM_FUNC_END(aesbs_ecb_encrypt) .align 4 -SYM_FUNC_START(aesbs_ecb_decrypt) +SYM_TYPED_FUNC_START(aesbs_ecb_decrypt) __ecb_crypt aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5 SYM_FUNC_END(aesbs_ecb_decrypt) @@ -799,11 +800,11 @@ SYM_FUNC_END(__xts_crypt8) ret .endm -SYM_FUNC_START(aesbs_xts_encrypt) +SYM_TYPED_FUNC_START(aesbs_xts_encrypt) __xts_crypt aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5 SYM_FUNC_END(aesbs_xts_encrypt) -SYM_FUNC_START(aesbs_xts_decrypt) +SYM_TYPED_FUNC_START(aesbs_xts_decrypt) __xts_crypt aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5 SYM_FUNC_END(aesbs_xts_decrypt) diff --git a/arch/arm64/include/asm/arm_pmuv3.h b/arch/arm64/include/asm/arm_pmuv3.h new file mode 100644 index 000000000000..d6b51deb7bf0 --- /dev/null +++ b/arch/arm64/include/asm/arm_pmuv3.h @@ -0,0 +1,155 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2012 ARM Ltd. + */ + +#ifndef __ASM_PMUV3_H +#define __ASM_PMUV3_H + +#include <linux/kvm_host.h> + +#include <asm/cpufeature.h> +#include <asm/sysreg.h> + +#define RETURN_READ_PMEVCNTRN(n) \ + return read_sysreg(pmevcntr##n##_el0) +static unsigned long read_pmevcntrn(int n) +{ + PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN); + return 0; +} + +#define WRITE_PMEVCNTRN(n) \ + write_sysreg(val, pmevcntr##n##_el0) +static void write_pmevcntrn(int n, unsigned long val) +{ + PMEVN_SWITCH(n, WRITE_PMEVCNTRN); +} + +#define WRITE_PMEVTYPERN(n) \ + write_sysreg(val, pmevtyper##n##_el0) +static void write_pmevtypern(int n, unsigned long val) +{ + PMEVN_SWITCH(n, WRITE_PMEVTYPERN); +} + +static inline unsigned long read_pmmir(void) +{ + return read_cpuid(PMMIR_EL1); +} + +static inline u32 read_pmuver(void) +{ + u64 dfr0 = read_sysreg(id_aa64dfr0_el1); + + return cpuid_feature_extract_unsigned_field(dfr0, + ID_AA64DFR0_EL1_PMUVer_SHIFT); +} + +static inline void write_pmcr(u32 val) +{ + write_sysreg(val, pmcr_el0); +} + +static inline u32 read_pmcr(void) +{ + return read_sysreg(pmcr_el0); +} + +static inline void write_pmselr(u32 val) +{ + write_sysreg(val, pmselr_el0); +} + +static inline void write_pmccntr(u64 val) +{ + write_sysreg(val, pmccntr_el0); +} + +static inline u64 read_pmccntr(void) +{ + return read_sysreg(pmccntr_el0); +} + +static inline void write_pmxevcntr(u32 val) +{ + write_sysreg(val, pmxevcntr_el0); +} + +static inline u32 read_pmxevcntr(void) +{ + return read_sysreg(pmxevcntr_el0); +} + +static inline void write_pmxevtyper(u32 val) +{ + write_sysreg(val, pmxevtyper_el0); +} + +static inline void write_pmcntenset(u32 val) +{ + write_sysreg(val, pmcntenset_el0); +} + +static inline void write_pmcntenclr(u32 val) +{ + write_sysreg(val, pmcntenclr_el0); +} + +static inline void write_pmintenset(u32 val) +{ + write_sysreg(val, pmintenset_el1); +} + +static inline void write_pmintenclr(u32 val) +{ + write_sysreg(val, pmintenclr_el1); +} + +static inline void write_pmccfiltr(u32 val) +{ + write_sysreg(val, pmccfiltr_el0); +} + +static inline void write_pmovsclr(u32 val) +{ + write_sysreg(val, pmovsclr_el0); +} + +static inline u32 read_pmovsclr(void) +{ + return read_sysreg(pmovsclr_el0); +} + +static inline void write_pmuserenr(u32 val) +{ + write_sysreg(val, pmuserenr_el0); +} + +static inline u32 read_pmceid0(void) +{ + return read_sysreg(pmceid0_el0); +} + +static inline u32 read_pmceid1(void) +{ + return read_sysreg(pmceid1_el0); +} + +static inline bool pmuv3_implemented(int pmuver) +{ + return !(pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF || + pmuver == ID_AA64DFR0_EL1_PMUVer_NI); +} + +static inline bool is_pmuv3p4(int pmuver) +{ + return pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P4; +} + +static inline bool is_pmuv3p5(int pmuver) +{ + return pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P5; +} + +#endif diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h index a94d6dacc029..319958b95cfd 100644 --- a/arch/arm64/include/asm/atomic_lse.h +++ b/arch/arm64/include/asm/atomic_lse.h @@ -251,22 +251,15 @@ __lse__cmpxchg_case_##name##sz(volatile void *ptr, \ u##sz old, \ u##sz new) \ { \ - register unsigned long x0 asm ("x0") = (unsigned long)ptr; \ - register u##sz x1 asm ("x1") = old; \ - register u##sz x2 asm ("x2") = new; \ - unsigned long tmp; \ - \ asm volatile( \ __LSE_PREAMBLE \ - " mov %" #w "[tmp], %" #w "[old]\n" \ - " cas" #mb #sfx "\t%" #w "[tmp], %" #w "[new], %[v]\n" \ - " mov %" #w "[ret], %" #w "[tmp]" \ - : [ret] "+r" (x0), [v] "+Q" (*(u##sz *)ptr), \ - [tmp] "=&r" (tmp) \ - : [old] "r" (x1), [new] "r" (x2) \ + " cas" #mb #sfx " %" #w "[old], %" #w "[new], %[v]\n" \ + : [v] "+Q" (*(u##sz *)ptr), \ + [old] "+r" (old) \ + : [new] "rZ" (new) \ : cl); \ \ - return x0; \ + return old; \ } __CMPXCHG_CASE(w, b, , 8, ) diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index 3dd8982a9ce3..cf2987464c18 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -131,25 +131,25 @@ do { \ case 1: \ asm volatile ("stlrb %w1, %0" \ : "=Q" (*__p) \ - : "r" (*(__u8 *)__u.__c) \ + : "rZ" (*(__u8 *)__u.__c) \ : "memory"); \ break; \ case 2: \ asm volatile ("stlrh %w1, %0" \ : "=Q" (*__p) \ - : "r" (*(__u16 *)__u.__c) \ + : "rZ" (*(__u16 *)__u.__c) \ : "memory"); \ break; \ case 4: \ asm volatile ("stlr %w1, %0" \ : "=Q" (*__p) \ - : "r" (*(__u32 *)__u.__c) \ + : "rZ" (*(__u32 *)__u.__c) \ : "memory"); \ break; \ case 8: \ - asm volatile ("stlr %1, %0" \ + asm volatile ("stlr %x1, %0" \ : "=Q" (*__p) \ - : "r" (*(__u64 *)__u.__c) \ + : "rZ" (*(__u64 *)__u.__c) \ : "memory"); \ break; \ } \ diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index 9f362274a4f7..74575c3d6987 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -83,10 +83,6 @@ struct compat_statfs { int f_spare[4]; }; -#define COMPAT_RLIM_INFINITY 0xffffffff - -#define COMPAT_OFF_T_MAX 0x7fffffff - #define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current))) #define COMPAT_MINSIGSTKSZ 2048 diff --git a/arch/arm64/include/asm/compiler.h b/arch/arm64/include/asm/compiler.h index 6fb2e6bcc392..9bbd7b7097ff 100644 --- a/arch/arm64/include/asm/compiler.h +++ b/arch/arm64/include/asm/compiler.h @@ -8,19 +8,33 @@ #define ARM64_ASM_PREAMBLE #endif -/* - * The EL0/EL1 pointer bits used by a pointer authentication code. - * This is dependent on TBI0/TBI1 being enabled, or bits 63:56 would also apply. - */ -#define ptrauth_user_pac_mask() GENMASK_ULL(54, vabits_actual) -#define ptrauth_kernel_pac_mask() GENMASK_ULL(63, vabits_actual) +#define xpaclri(ptr) \ +({ \ + register unsigned long __xpaclri_ptr asm("x30") = (ptr); \ + \ + asm( \ + ARM64_ASM_PREAMBLE \ + " hint #7\n" \ + : "+r" (__xpaclri_ptr)); \ + \ + __xpaclri_ptr; \ +}) -/* Valid for EL0 TTBR0 and EL1 TTBR1 instruction pointers */ -#define ptrauth_clear_pac(ptr) \ - ((ptr & BIT_ULL(55)) ? (ptr | ptrauth_kernel_pac_mask()) : \ - (ptr & ~ptrauth_user_pac_mask())) +#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL +#define ptrauth_strip_kernel_insn_pac(ptr) xpaclri(ptr) +#else +#define ptrauth_strip_kernel_insn_pac(ptr) (ptr) +#endif + +#ifdef CONFIG_ARM64_PTR_AUTH +#define ptrauth_strip_user_insn_pac(ptr) xpaclri(ptr) +#else +#define ptrauth_strip_user_insn_pac(ptr) (ptr) +#endif +#if !defined(CONFIG_BUILTIN_RETURN_ADDRESS_STRIPS_PAC) #define __builtin_return_address(val) \ - (void *)(ptrauth_clear_pac((unsigned long)__builtin_return_address(val))) + (void *)(ptrauth_strip_kernel_insn_pac((unsigned long)__builtin_return_address(val))) +#endif #endif /* __ASM_COMPILER_H */ diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h index 7b7e05c02691..13d437bcbf58 100644 --- a/arch/arm64/include/asm/debug-monitors.h +++ b/arch/arm64/include/asm/debug-monitors.h @@ -104,6 +104,7 @@ void user_regs_reset_single_step(struct user_pt_regs *regs, void kernel_enable_single_step(struct pt_regs *regs); void kernel_disable_single_step(void); int kernel_active_single_step(void); +void kernel_rewind_single_step(struct pt_regs *regs); #ifdef CONFIG_HAVE_HW_BREAKPOINT int reinstall_suspended_bps(struct pt_regs *regs); diff --git a/arch/arm64/include/asm/fixmap.h b/arch/arm64/include/asm/fixmap.h index 71ed5fdf718b..58c294a96676 100644 --- a/arch/arm64/include/asm/fixmap.h +++ b/arch/arm64/include/asm/fixmap.h @@ -17,6 +17,7 @@ #ifndef __ASSEMBLY__ #include <linux/kernel.h> +#include <linux/math.h> #include <linux/sizes.h> #include <asm/boot.h> #include <asm/page.h> @@ -36,17 +37,13 @@ enum fixed_addresses { FIX_HOLE, /* - * Reserve a virtual window for the FDT that is 2 MB larger than the - * maximum supported size, and put it at the top of the fixmap region. - * The additional space ensures that any FDT that does not exceed - * MAX_FDT_SIZE can be mapped regardless of whether it crosses any - * 2 MB alignment boundaries. - * - * Keep this at the top so it remains 2 MB aligned. + * Reserve a virtual window for the FDT that is a page bigger than the + * maximum supported size. The additional space ensures that any FDT + * that does not exceed MAX_FDT_SIZE can be mapped regardless of + * whether it crosses any page boundary. */ -#define FIX_FDT_SIZE (MAX_FDT_SIZE + SZ_2M) FIX_FDT_END, - FIX_FDT = FIX_FDT_END + FIX_FDT_SIZE / PAGE_SIZE - 1, + FIX_FDT = FIX_FDT_END + DIV_ROUND_UP(MAX_FDT_SIZE, PAGE_SIZE) + 1, FIX_EARLYCON_MEM_BASE, FIX_TEXT_POKE0, @@ -95,12 +92,15 @@ enum fixed_addresses { __end_of_fixed_addresses }; -#define FIXADDR_SIZE (__end_of_permanent_fixed_addresses << PAGE_SHIFT) -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) +#define FIXADDR_SIZE (__end_of_permanent_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) +#define FIXADDR_TOT_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_TOT_START (FIXADDR_TOP - FIXADDR_TOT_SIZE) #define FIXMAP_PAGE_IO __pgprot(PROT_DEVICE_nGnRE) void __init early_fixmap_init(void); +void __init fixmap_copy(pgd_t *pgdir); #define __early_set_fixmap __set_fixmap diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h index 1c2672bbbf37..b87d70b693c6 100644 --- a/arch/arm64/include/asm/ftrace.h +++ b/arch/arm64/include/asm/ftrace.h @@ -70,10 +70,19 @@ struct ftrace_ops; #define arch_ftrace_get_regs(regs) NULL +/* + * Note: sizeof(struct ftrace_regs) must be a multiple of 16 to ensure correct + * stack alignment + */ struct ftrace_regs { /* x0 - x8 */ unsigned long regs[9]; + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS + unsigned long direct_tramp; +#else unsigned long __unused; +#endif unsigned long fp; unsigned long lr; @@ -136,6 +145,19 @@ int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec); void ftrace_graph_func(unsigned long ip, unsigned long parent_ip, struct ftrace_ops *op, struct ftrace_regs *fregs); #define ftrace_graph_func ftrace_graph_func + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS +static inline void arch_ftrace_set_direct_caller(struct ftrace_regs *fregs, + unsigned long addr) +{ + /* + * The ftrace trampoline will return to this address instead of the + * instrumented function. + */ + fregs->direct_tramp = addr; +} +#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */ + #endif #define ftrace_return_address(n) return_address(n) diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h index fcd14197756f..186dd7f85b14 100644 --- a/arch/arm64/include/asm/kernel-pgtable.h +++ b/arch/arm64/include/asm/kernel-pgtable.h @@ -59,8 +59,11 @@ #define EARLY_KASLR (0) #endif +#define SPAN_NR_ENTRIES(vstart, vend, shift) \ + ((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1) + #define EARLY_ENTRIES(vstart, vend, shift, add) \ - ((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1 + add) + (SPAN_NR_ENTRIES(vstart, vend, shift) + (add)) #define EARLY_PGDS(vstart, vend, add) (EARLY_ENTRIES(vstart, vend, PGDIR_SHIFT, add)) diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h index 559bfae26715..9ac9572a3bbe 100644 --- a/arch/arm64/include/asm/kexec.h +++ b/arch/arm64/include/asm/kexec.h @@ -102,12 +102,6 @@ void cpu_soft_restart(unsigned long el2_switch, unsigned long entry, int machine_kexec_post_load(struct kimage *image); #define machine_kexec_post_load machine_kexec_post_load - -void arch_kexec_protect_crashkres(void); -#define arch_kexec_protect_crashkres arch_kexec_protect_crashkres - -void arch_kexec_unprotect_crashkres(void); -#define arch_kexec_unprotect_crashkres arch_kexec_unprotect_crashkres #endif #define ARCH_HAS_KIMAGE_ARCH diff --git a/arch/arm64/include/asm/kfence.h b/arch/arm64/include/asm/kfence.h index aa855c6a0ae6..a81937fae9f6 100644 --- a/arch/arm64/include/asm/kfence.h +++ b/arch/arm64/include/asm/kfence.h @@ -19,4 +19,14 @@ static inline bool kfence_protect_page(unsigned long addr, bool protect) return true; } +#ifdef CONFIG_KFENCE +extern bool kfence_early_init; +static inline bool arm64_kfence_can_set_direct_map(void) +{ + return !kfence_early_init; +} +#else /* CONFIG_KFENCE */ +static inline bool arm64_kfence_can_set_direct_map(void) { return false; } +#endif /* CONFIG_KFENCE */ + #endif /* __ASM_KFENCE_H */ diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index a1892a8f6032..3dd691c85ca0 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -193,6 +193,9 @@ struct kvm_arch { /* Interrupt controller */ struct vgic_dist vgic; + /* Timers */ + struct arch_timer_vm_data timer_data; + /* Mandated version of PSCI */ u32 psci_version; @@ -573,9 +576,22 @@ struct kvm_vcpu_arch { ({ \ __build_check_flag(v, flagset, f, m); \ \ - v->arch.flagset & (m); \ + READ_ONCE(v->arch.flagset) & (m); \ }) +/* + * Note that the set/clear accessors must be preempt-safe in order to + * avoid nesting them with load/put which also manipulate flags... + */ +#ifdef __KVM_NVHE_HYPERVISOR__ +/* the nVHE hypervisor is always non-preemptible */ +#define __vcpu_flags_preempt_disable() +#define __vcpu_flags_preempt_enable() +#else +#define __vcpu_flags_preempt_disable() preempt_disable() +#define __vcpu_flags_preempt_enable() preempt_enable() +#endif + #define __vcpu_set_flag(v, flagset, f, m) \ do { \ typeof(v->arch.flagset) *fset; \ @@ -583,9 +599,11 @@ struct kvm_vcpu_arch { __build_check_flag(v, flagset, f, m); \ \ fset = &v->arch.flagset; \ + __vcpu_flags_preempt_disable(); \ if (HWEIGHT(m) > 1) \ *fset &= ~(m); \ *fset |= (f); \ + __vcpu_flags_preempt_enable(); \ } while (0) #define __vcpu_clear_flag(v, flagset, f, m) \ @@ -595,7 +613,9 @@ struct kvm_vcpu_arch { __build_check_flag(v, flagset, f, m); \ \ fset = &v->arch.flagset; \ + __vcpu_flags_preempt_disable(); \ *fset &= ~(m); \ + __vcpu_flags_preempt_enable(); \ } while (0) #define vcpu_get_flag(v, ...) __vcpu_get_flag((v), __VA_ARGS__) diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index 78e5163836a0..efcd68154a3a 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -374,11 +374,6 @@ static inline void *phys_to_virt(phys_addr_t x) }) void dump_mem_limit(void); - -static inline bool defer_reserve_crashkernel(void) -{ - return IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32); -} #endif /* !ASSEMBLY */ /* diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index 48f8466a4be9..4384eaa0aeb7 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -65,6 +65,8 @@ extern void paging_init(void); extern void bootmem_init(void); extern void __iomem *early_io_map(phys_addr_t phys, unsigned long virt); extern void init_mem_pgprot(void); +extern void create_mapping_noalloc(phys_addr_t phys, unsigned long virt, + phys_addr_t size, pgprot_t prot); extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys, unsigned long virt, phys_addr_t size, pgprot_t prot, bool page_mappings_only); diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h index 3eaf462f5752..eb7071c9eb34 100644 --- a/arch/arm64/include/asm/perf_event.h +++ b/arch/arm64/include/asm/perf_event.h @@ -9,255 +9,6 @@ #include <asm/stack_pointer.h> #include <asm/ptrace.h> -#define ARMV8_PMU_MAX_COUNTERS 32 -#define ARMV8_PMU_COUNTER_MASK (ARMV8_PMU_MAX_COUNTERS - 1) - -/* - * Common architectural and microarchitectural event numbers. - */ -#define ARMV8_PMUV3_PERFCTR_SW_INCR 0x0000 -#define ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL 0x0001 -#define ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL 0x0002 -#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL 0x0003 -#define ARMV8_PMUV3_PERFCTR_L1D_CACHE 0x0004 -#define ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL 0x0005 -#define ARMV8_PMUV3_PERFCTR_LD_RETIRED 0x0006 -#define ARMV8_PMUV3_PERFCTR_ST_RETIRED 0x0007 -#define ARMV8_PMUV3_PERFCTR_INST_RETIRED 0x0008 -#define ARMV8_PMUV3_PERFCTR_EXC_TAKEN 0x0009 -#define ARMV8_PMUV3_PERFCTR_EXC_RETURN 0x000A -#define ARMV8_PMUV3_PERFCTR_CID_WRITE_RETIRED 0x000B -#define ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED 0x000C -#define ARMV8_PMUV3_PERFCTR_BR_IMMED_RETIRED 0x000D -#define ARMV8_PMUV3_PERFCTR_BR_RETURN_RETIRED 0x000E -#define ARMV8_PMUV3_PERFCTR_UNALIGNED_LDST_RETIRED 0x000F -#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED 0x0010 -#define ARMV8_PMUV3_PERFCTR_CPU_CYCLES 0x0011 -#define ARMV8_PMUV3_PERFCTR_BR_PRED 0x0012 -#define ARMV8_PMUV3_PERFCTR_MEM_ACCESS 0x0013 -#define ARMV8_PMUV3_PERFCTR_L1I_CACHE 0x0014 -#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_WB 0x0015 -#define ARMV8_PMUV3_PERFCTR_L2D_CACHE 0x0016 -#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_REFILL 0x0017 -#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_WB 0x0018 -#define ARMV8_PMUV3_PERFCTR_BUS_ACCESS 0x0019 -#define ARMV8_PMUV3_PERFCTR_MEMORY_ERROR 0x001A -#define ARMV8_PMUV3_PERFCTR_INST_SPEC 0x001B -#define ARMV8_PMUV3_PERFCTR_TTBR_WRITE_RETIRED 0x001C -#define ARMV8_PMUV3_PERFCTR_BUS_CYCLES 0x001D -#define ARMV8_PMUV3_PERFCTR_CHAIN 0x001E -#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_ALLOCATE 0x001F -#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_ALLOCATE 0x0020 -#define ARMV8_PMUV3_PERFCTR_BR_RETIRED 0x0021 -#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED_RETIRED 0x0022 -#define ARMV8_PMUV3_PERFCTR_STALL_FRONTEND 0x0023 -#define ARMV8_PMUV3_PERFCTR_STALL_BACKEND 0x0024 -#define ARMV8_PMUV3_PERFCTR_L1D_TLB 0x0025 -#define ARMV8_PMUV3_PERFCTR_L1I_TLB 0x0026 -#define ARMV8_PMUV3_PERFCTR_L2I_CACHE 0x0027 -#define ARMV8_PMUV3_PERFCTR_L2I_CACHE_REFILL 0x0028 -#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_ALLOCATE 0x0029 -#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_REFILL 0x002A -#define ARMV8_PMUV3_PERFCTR_L3D_CACHE 0x002B -#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_WB 0x002C -#define ARMV8_PMUV3_PERFCTR_L2D_TLB_REFILL 0x002D -#define ARMV8_PMUV3_PERFCTR_L2I_TLB_REFILL 0x002E -#define ARMV8_PMUV3_PERFCTR_L2D_TLB 0x002F -#define ARMV8_PMUV3_PERFCTR_L2I_TLB 0x0030 -#define ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS 0x0031 -#define ARMV8_PMUV3_PERFCTR_LL_CACHE 0x0032 -#define ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS 0x0033 -#define ARMV8_PMUV3_PERFCTR_DTLB_WALK 0x0034 -#define ARMV8_PMUV3_PERFCTR_ITLB_WALK 0x0035 -#define ARMV8_PMUV3_PERFCTR_LL_CACHE_RD 0x0036 -#define ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD 0x0037 -#define ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS_RD 0x0038 -#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_LMISS_RD 0x0039 -#define ARMV8_PMUV3_PERFCTR_OP_RETIRED 0x003A -#define ARMV8_PMUV3_PERFCTR_OP_SPEC 0x003B -#define ARMV8_PMUV3_PERFCTR_STALL 0x003C -#define ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND 0x003D -#define ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND 0x003E -#define ARMV8_PMUV3_PERFCTR_STALL_SLOT 0x003F - -/* Statistical profiling extension microarchitectural events */ -#define ARMV8_SPE_PERFCTR_SAMPLE_POP 0x4000 -#define ARMV8_SPE_PERFCTR_SAMPLE_FEED 0x4001 -#define ARMV8_SPE_PERFCTR_SAMPLE_FILTRATE 0x4002 -#define ARMV8_SPE_PERFCTR_SAMPLE_COLLISION 0x4003 - -/* AMUv1 architecture events */ -#define ARMV8_AMU_PERFCTR_CNT_CYCLES 0x4004 -#define ARMV8_AMU_PERFCTR_STALL_BACKEND_MEM 0x4005 - -/* long-latency read miss events */ -#define ARMV8_PMUV3_PERFCTR_L1I_CACHE_LMISS 0x4006 -#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_LMISS_RD 0x4009 -#define ARMV8_PMUV3_PERFCTR_L2I_CACHE_LMISS 0x400A -#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_LMISS_RD 0x400B - -/* Trace buffer events */ -#define ARMV8_PMUV3_PERFCTR_TRB_WRAP 0x400C -#define ARMV8_PMUV3_PERFCTR_TRB_TRIG 0x400E - -/* Trace unit events */ -#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT0 0x4010 -#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT1 0x4011 -#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT2 0x4012 -#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT3 0x4013 -#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT4 0x4018 -#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT5 0x4019 -#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT6 0x401A -#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT7 0x401B - -/* additional latency from alignment events */ -#define ARMV8_PMUV3_PERFCTR_LDST_ALIGN_LAT 0x4020 -#define ARMV8_PMUV3_PERFCTR_LD_ALIGN_LAT 0x4021 -#define ARMV8_PMUV3_PERFCTR_ST_ALIGN_LAT 0x4022 - -/* Armv8.5 Memory Tagging Extension events */ -#define ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED 0x4024 -#define ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_RD 0x4025 -#define ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_WR 0x4026 - -/* ARMv8 recommended implementation defined event types */ -#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD 0x0040 -#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR 0x0041 -#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_RD 0x0042 -#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_WR 0x0043 -#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_INNER 0x0044 -#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_OUTER 0x0045 -#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WB_VICTIM 0x0046 -#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WB_CLEAN 0x0047 -#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_INVAL 0x0048 - -#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_RD 0x004C -#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_WR 0x004D -#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_RD 0x004E -#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_WR 0x004F -#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_RD 0x0050 -#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WR 0x0051 -#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_REFILL_RD 0x0052 -#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_REFILL_WR 0x0053 - -#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WB_VICTIM 0x0056 -#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WB_CLEAN 0x0057 -#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_INVAL 0x0058 - -#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_REFILL_RD 0x005C -#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_REFILL_WR 0x005D -#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_RD 0x005E -#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_WR 0x005F -#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_RD 0x0060 -#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_WR 0x0061 -#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_SHARED 0x0062 -#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_NOT_SHARED 0x0063 -#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_NORMAL 0x0064 -#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_PERIPH 0x0065 -#define ARMV8_IMPDEF_PERFCTR_MEM_ACCESS_RD 0x0066 -#define ARMV8_IMPDEF_PERFCTR_MEM_ACCESS_WR 0x0067 -#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_LD_SPEC 0x0068 -#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_ST_SPEC 0x0069 -#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_LDST_SPEC 0x006A - -#define ARMV8_IMPDEF_PERFCTR_LDREX_SPEC 0x006C -#define ARMV8_IMPDEF_PERFCTR_STREX_PASS_SPEC 0x006D -#define ARMV8_IMPDEF_PERFCTR_STREX_FAIL_SPEC 0x006E -#define ARMV8_IMPDEF_PERFCTR_STREX_SPEC 0x006F -#define ARMV8_IMPDEF_PERFCTR_LD_SPEC 0x0070 -#define ARMV8_IMPDEF_PERFCTR_ST_SPEC 0x0071 -#define ARMV8_IMPDEF_PERFCTR_LDST_SPEC 0x0072 -#define ARMV8_IMPDEF_PERFCTR_DP_SPEC 0x0073 -#define ARMV8_IMPDEF_PERFCTR_ASE_SPEC 0x0074 -#define ARMV8_IMPDEF_PERFCTR_VFP_SPEC 0x0075 -#define ARMV8_IMPDEF_PERFCTR_PC_WRITE_SPEC 0x0076 -#define ARMV8_IMPDEF_PERFCTR_CRYPTO_SPEC 0x0077 -#define ARMV8_IMPDEF_PERFCTR_BR_IMMED_SPEC 0x0078 -#define ARMV8_IMPDEF_PERFCTR_BR_RETURN_SPEC 0x0079 -#define ARMV8_IMPDEF_PERFCTR_BR_INDIRECT_SPEC 0x007A - -#define ARMV8_IMPDEF_PERFCTR_ISB_SPEC 0x007C -#define ARMV8_IMPDEF_PERFCTR_DSB_SPEC 0x007D -#define ARMV8_IMPDEF_PERFCTR_DMB_SPEC 0x007E - -#define ARMV8_IMPDEF_PERFCTR_EXC_UNDEF 0x0081 -#define ARMV8_IMPDEF_PERFCTR_EXC_SVC 0x0082 -#define ARMV8_IMPDEF_PERFCTR_EXC_PABORT 0x0083 -#define ARMV8_IMPDEF_PERFCTR_EXC_DABORT 0x0084 - -#define ARMV8_IMPDEF_PERFCTR_EXC_IRQ 0x0086 -#define ARMV8_IMPDEF_PERFCTR_EXC_FIQ 0x0087 -#define ARMV8_IMPDEF_PERFCTR_EXC_SMC 0x0088 - -#define ARMV8_IMPDEF_PERFCTR_EXC_HVC 0x008A -#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_PABORT 0x008B -#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_DABORT 0x008C -#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_OTHER 0x008D -#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_IRQ 0x008E -#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_FIQ 0x008F -#define ARMV8_IMPDEF_PERFCTR_RC_LD_SPEC 0x0090 -#define ARMV8_IMPDEF_PERFCTR_RC_ST_SPEC 0x0091 - -#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_RD 0x00A0 -#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WR 0x00A1 -#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_REFILL_RD 0x00A2 -#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_REFILL_WR 0x00A3 - -#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WB_VICTIM 0x00A6 -#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WB_CLEAN 0x00A7 -#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_INVAL 0x00A8 - -/* - * Per-CPU PMCR: config reg - */ -#define ARMV8_PMU_PMCR_E (1 << 0) /* Enable all counters */ -#define ARMV8_PMU_PMCR_P (1 << 1) /* Reset all counters */ -#define ARMV8_PMU_PMCR_C (1 << 2) /* Cycle counter reset */ -#define ARMV8_PMU_PMCR_D (1 << 3) /* CCNT counts every 64th cpu cycle */ -#define ARMV8_PMU_PMCR_X (1 << 4) /* Export to ETM */ -#define ARMV8_PMU_PMCR_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ -#define ARMV8_PMU_PMCR_LC (1 << 6) /* Overflow on 64 bit cycle counter */ -#define ARMV8_PMU_PMCR_LP (1 << 7) /* Long event counter enable */ -#define ARMV8_PMU_PMCR_N_SHIFT 11 /* Number of counters supported */ -#define ARMV8_PMU_PMCR_N_MASK 0x1f -#define ARMV8_PMU_PMCR_MASK 0xff /* Mask for writable bits */ - -/* - * PMOVSR: counters overflow flag status reg - */ -#define ARMV8_PMU_OVSR_MASK 0xffffffff /* Mask for writable bits */ -#define ARMV8_PMU_OVERFLOWED_MASK ARMV8_PMU_OVSR_MASK - -/* - * PMXEVTYPER: Event selection reg - */ -#define ARMV8_PMU_EVTYPE_MASK 0xc800ffff /* Mask for writable bits */ -#define ARMV8_PMU_EVTYPE_EVENT 0xffff /* Mask for EVENT bits */ - -/* - * Event filters for PMUv3 - */ -#define ARMV8_PMU_EXCLUDE_EL1 (1U << 31) -#define ARMV8_PMU_EXCLUDE_EL0 (1U << 30) -#define ARMV8_PMU_INCLUDE_EL2 (1U << 27) - -/* - * PMUSERENR: user enable reg - */ -#define ARMV8_PMU_USERENR_MASK 0xf /* Mask for writable bits */ -#define ARMV8_PMU_USERENR_EN (1 << 0) /* PMU regs can be accessed at EL0 */ -#define ARMV8_PMU_USERENR_SW (1 << 1) /* PMSWINC can be written at EL0 */ -#define ARMV8_PMU_USERENR_CR (1 << 2) /* Cycle counter can be read at EL0 */ -#define ARMV8_PMU_USERENR_ER (1 << 3) /* Event counter can be read at EL0 */ - -/* PMMIR_EL1.SLOTS mask */ -#define ARMV8_PMU_SLOTS_MASK 0xff - -#define ARMV8_PMU_BUS_SLOTS_SHIFT 8 -#define ARMV8_PMU_BUS_SLOTS_MASK 0xff -#define ARMV8_PMU_BUS_WIDTH_SHIFT 16 -#define ARMV8_PMU_BUS_WIDTH_MASK 0xf - #ifdef CONFIG_PERF_EVENTS struct pt_regs; extern unsigned long perf_instruction_pointer(struct pt_regs *regs); diff --git a/arch/arm64/include/asm/pointer_auth.h b/arch/arm64/include/asm/pointer_auth.h index efb098de3a84..d2e0306e65d3 100644 --- a/arch/arm64/include/asm/pointer_auth.h +++ b/arch/arm64/include/asm/pointer_auth.h @@ -10,6 +10,13 @@ #include <asm/memory.h> #include <asm/sysreg.h> +/* + * The EL0/EL1 pointer bits used by a pointer authentication code. + * This is dependent on TBI0/TBI1 being enabled, or bits 63:56 would also apply. + */ +#define ptrauth_user_pac_mask() GENMASK_ULL(54, vabits_actual) +#define ptrauth_kernel_pac_mask() GENMASK_ULL(63, vabits_actual) + #define PR_PAC_ENABLED_KEYS_MASK \ (PR_PAC_APIAKEY | PR_PAC_APIBKEY | PR_PAC_APDAKEY | PR_PAC_APDBKEY) @@ -97,11 +104,6 @@ extern int ptrauth_set_enabled_keys(struct task_struct *tsk, unsigned long keys, unsigned long enabled); extern int ptrauth_get_enabled_keys(struct task_struct *tsk); -static inline unsigned long ptrauth_strip_insn_pac(unsigned long ptr) -{ - return ptrauth_clear_pac(ptr); -} - static __always_inline void ptrauth_enable(void) { if (!system_supports_address_auth()) @@ -133,7 +135,6 @@ static __always_inline void ptrauth_enable(void) #define ptrauth_prctl_reset_keys(tsk, arg) (-EINVAL) #define ptrauth_set_enabled_keys(tsk, keys, enabled) (-EINVAL) #define ptrauth_get_enabled_keys(tsk) (-EINVAL) -#define ptrauth_strip_insn_pac(lr) (lr) #define ptrauth_suspend_exit() #define ptrauth_thread_init_user() #define ptrauth_thread_switch_user(tsk) diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 9e3ecba3c4e6..c48b41c9b0cc 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -419,9 +419,6 @@ #define SYS_MDCR_EL2 sys_reg(3, 4, 1, 1, 1) #define SYS_CPTR_EL2 sys_reg(3, 4, 1, 1, 2) #define SYS_HSTR_EL2 sys_reg(3, 4, 1, 1, 3) -#define SYS_HFGRTR_EL2 sys_reg(3, 4, 1, 1, 4) -#define SYS_HFGWTR_EL2 sys_reg(3, 4, 1, 1, 5) -#define SYS_HFGITR_EL2 sys_reg(3, 4, 1, 1, 6) #define SYS_HACR_EL2 sys_reg(3, 4, 1, 1, 7) #define SYS_TTBR0_EL2 sys_reg(3, 4, 2, 0, 0) @@ -758,12 +755,6 @@ #define ICH_VTR_TDS_SHIFT 19 #define ICH_VTR_TDS_MASK (1 << ICH_VTR_TDS_SHIFT) -/* HFG[WR]TR_EL2 bit definitions */ -#define HFGxTR_EL2_nTPIDR2_EL0_SHIFT 55 -#define HFGxTR_EL2_nTPIDR2_EL0_MASK BIT_MASK(HFGxTR_EL2_nTPIDR2_EL0_SHIFT) -#define HFGxTR_EL2_nSMPRI_EL1_SHIFT 54 -#define HFGxTR_EL2_nSMPRI_EL1_MASK BIT_MASK(HFGxTR_EL2_nSMPRI_EL1_SHIFT) - #define ARM64_FEATURE_FIELD_BITS 4 /* Defined for compatibility only, do not add new users. */ diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index 5c7b2f9d5913..8209e6a86989 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -237,7 +237,7 @@ static inline void __user *__uaccess_mask_ptr(const void __user *ptr) "1: " load " " reg "1, [%2]\n" \ "2:\n" \ _ASM_EXTABLE_##type##ACCESS_ERR_ZERO(1b, 2b, %w0, %w1) \ - : "+r" (err), "=&r" (x) \ + : "+r" (err), "=r" (x) \ : "r" (addr)) #define __raw_get_mem(ldr, x, ptr, err, type) \ @@ -327,7 +327,7 @@ do { \ "2:\n" \ _ASM_EXTABLE_##type##ACCESS_ERR(1b, 2b, %w0) \ : "+r" (err) \ - : "r" (x), "r" (addr)) + : "rZ" (x), "r" (addr)) #define __raw_put_mem(str, x, ptr, err, type) \ do { \ @@ -449,8 +449,6 @@ extern long strncpy_from_user(char *dest, const char __user *src, long count); extern __must_check long strnlen_user(const char __user *str, long n); #ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE -struct page; -void memcpy_page_flushcache(char *to, struct page *page, size_t offset, size_t len); extern unsigned long __must_check __copy_user_flushcache(void *to, const void __user *from, unsigned long n); static inline int __copy_from_user_flushcache(void *dst, const void __user *src, unsigned size) diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index ceba6792f5b3..7c2bb4e72476 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_ARM64_MODULE_PLTS) += module-plts.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o -obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_CPU_PM) += sleep.o suspend.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c index 8a9052cf3013..1febd412b4d2 100644 --- a/arch/arm64/kernel/armv8_deprecated.c +++ b/arch/arm64/kernel/armv8_deprecated.c @@ -420,14 +420,14 @@ static DEFINE_MUTEX(insn_emulation_mutex); static void enable_insn_hw_mode(void *data) { - struct insn_emulation *insn = (struct insn_emulation *)data; + struct insn_emulation *insn = data; if (insn->set_hw_mode) insn->set_hw_mode(true); } static void disable_insn_hw_mode(void *data) { - struct insn_emulation *insn = (struct insn_emulation *)data; + struct insn_emulation *insn = data; if (insn->set_hw_mode) insn->set_hw_mode(false); } diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index ae345b06e9f7..0996094b0d22 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -93,6 +93,9 @@ int main(void) DEFINE(FREGS_LR, offsetof(struct ftrace_regs, lr)); DEFINE(FREGS_SP, offsetof(struct ftrace_regs, sp)); DEFINE(FREGS_PC, offsetof(struct ftrace_regs, pc)); +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS + DEFINE(FREGS_DIRECT_TRAMP, offsetof(struct ftrace_regs, direct_tramp)); +#endif DEFINE(FREGS_SIZE, sizeof(struct ftrace_regs)); BLANK(); #endif @@ -197,6 +200,9 @@ int main(void) #endif #ifdef CONFIG_FUNCTION_TRACER DEFINE(FTRACE_OPS_FUNC, offsetof(struct ftrace_ops, func)); +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS + DEFINE(FTRACE_OPS_DIRECT_CALL, offsetof(struct ftrace_ops, direct_call)); +#endif #endif return 0; } diff --git a/arch/arm64/kernel/compat_alignment.c b/arch/arm64/kernel/compat_alignment.c index 5edec2f49ec9..deff21bfa680 100644 --- a/arch/arm64/kernel/compat_alignment.c +++ b/arch/arm64/kernel/compat_alignment.c @@ -314,36 +314,32 @@ int do_compat_alignment_fixup(unsigned long addr, struct pt_regs *regs) int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs); unsigned int type; u32 instr = 0; - u16 tinstr = 0; int isize = 4; int thumb2_32b = 0; - int fault; instrptr = instruction_pointer(regs); if (compat_thumb_mode(regs)) { __le16 __user *ptr = (__le16 __user *)(instrptr & ~1); + u16 tinstr, tinst2; - fault = alignment_get_thumb(regs, ptr, &tinstr); - if (!fault) { - if (IS_T32(tinstr)) { - /* Thumb-2 32-bit */ - u16 tinst2; - fault = alignment_get_thumb(regs, ptr + 1, &tinst2); - instr = ((u32)tinstr << 16) | tinst2; - thumb2_32b = 1; - } else { - isize = 2; - instr = thumb2arm(tinstr); - } + if (alignment_get_thumb(regs, ptr, &tinstr)) + return 1; + + if (IS_T32(tinstr)) { /* Thumb-2 32-bit */ + if (alignment_get_thumb(regs, ptr + 1, &tinst2)) + return 1; + instr = ((u32)tinstr << 16) | tinst2; + thumb2_32b = 1; + } else { + isize = 2; + instr = thumb2arm(tinstr); } } else { - fault = alignment_get_arm(regs, (__le32 __user *)instrptr, &instr); + if (alignment_get_arm(regs, (__le32 __user *)instrptr, &instr)) + return 1; } - if (fault) - return 1; - switch (CODING_BITS(instr)) { case 0x00000000: /* 3.13.4 load/store instruction extensions */ if (LDSTHD_I_BIT(instr)) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 2e3e55139777..1bdad599e769 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -140,6 +140,13 @@ void dump_cpu_features(void) pr_emerg("0x%*pb\n", ARM64_NCAPS, &cpu_hwcaps); } +#define ARM64_CPUID_FIELDS(reg, field, min_value) \ + .sys_reg = SYS_##reg, \ + .field_pos = reg##_##field##_SHIFT, \ + .field_width = reg##_##field##_WIDTH, \ + .sign = reg##_##field##_SIGNED, \ + .min_field_value = reg##_##field##_##min_value, + #define __ARM64_FTR_BITS(SIGNED, VISIBLE, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \ { \ .sign = SIGNED, \ @@ -2206,22 +2213,14 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_GIC_CPUIF_SYSREGS, .type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE, .matches = has_useable_gicv3_cpuif, - .sys_reg = SYS_ID_AA64PFR0_EL1, - .field_pos = ID_AA64PFR0_EL1_GIC_SHIFT, - .field_width = 4, - .sign = FTR_UNSIGNED, - .min_field_value = 1, + ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, GIC, IMP) }, { .desc = "Enhanced Counter Virtualization", .capability = ARM64_HAS_ECV, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64MMFR0_EL1, - .field_pos = ID_AA64MMFR0_EL1_ECV_SHIFT, - .field_width = 4, - .sign = FTR_UNSIGNED, - .min_field_value = 1, + ARM64_CPUID_FIELDS(ID_AA64MMFR0_EL1, ECV, IMP) }, #ifdef CONFIG_ARM64_PAN { @@ -2229,12 +2228,8 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_PAN, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64MMFR1_EL1, - .field_pos = ID_AA64MMFR1_EL1_PAN_SHIFT, - .field_width = 4, - .sign = FTR_UNSIGNED, - .min_field_value = 1, .cpu_enable = cpu_enable_pan, + ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, PAN, IMP) }, #endif /* CONFIG_ARM64_PAN */ #ifdef CONFIG_ARM64_EPAN @@ -2243,11 +2238,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_EPAN, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64MMFR1_EL1, - .field_pos = ID_AA64MMFR1_EL1_PAN_SHIFT, - .field_width = 4, - .sign = FTR_UNSIGNED, - .min_field_value = 3, + ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, PAN, PAN3) }, #endif /* CONFIG_ARM64_EPAN */ #ifdef CONFIG_ARM64_LSE_ATOMICS @@ -2256,11 +2247,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_LSE_ATOMICS, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64ISAR0_EL1, - .field_pos = ID_AA64ISAR0_EL1_ATOMIC_SHIFT, - .field_width = 4, - .sign = FTR_UNSIGNED, - .min_field_value = 2, + ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, ATOMIC, IMP) }, #endif /* CONFIG_ARM64_LSE_ATOMICS */ { @@ -2281,21 +2268,13 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_NESTED_VIRT, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_nested_virt_support, - .sys_reg = SYS_ID_AA64MMFR2_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR2_EL1_NV_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64MMFR2_EL1_NV_IMP, + ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, IMP) }, { .capability = ARM64_HAS_32BIT_EL0_DO_NOT_USE, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_32bit_el0, - .sys_reg = SYS_ID_AA64PFR0_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_EL1_EL0_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64PFR0_EL1_ELx_32BIT_64BIT, + ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, EL0, AARCH32) }, #ifdef CONFIG_KVM { @@ -2303,11 +2282,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_32BIT_EL1, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64PFR0_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_EL1_EL1_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64PFR0_EL1_ELx_32BIT_64BIT, + ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, EL1, AARCH32) }, { .desc = "Protected KVM", @@ -2320,17 +2295,14 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .desc = "Kernel page table isolation (KPTI)", .capability = ARM64_UNMAP_KERNEL_AT_EL0, .type = ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE, + .cpu_enable = kpti_install_ng_mappings, + .matches = unmap_kernel_at_el0, /* * The ID feature fields below are used to indicate that * the CPU doesn't need KPTI. See unmap_kernel_at_el0 for * more details. */ - .sys_reg = SYS_ID_AA64PFR0_EL1, - .field_pos = ID_AA64PFR0_EL1_CSV3_SHIFT, - .field_width = 4, - .min_field_value = 1, - .matches = unmap_kernel_at_el0, - .cpu_enable = kpti_install_ng_mappings, + ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, CSV3, IMP) }, { /* FP/SIMD is not implemented */ @@ -2345,21 +2317,14 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_DCPOP, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64ISAR1_EL1, - .field_pos = ID_AA64ISAR1_EL1_DPB_SHIFT, - .field_width = 4, - .min_field_value = 1, + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, DPB, IMP) }, { .desc = "Data cache clean to Point of Deep Persistence", .capability = ARM64_HAS_DCPODP, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64ISAR1_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64ISAR1_EL1_DPB_SHIFT, - .field_width = 4, - .min_field_value = 2, + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, DPB, DPB2) }, #endif #ifdef CONFIG_ARM64_SVE @@ -2367,13 +2332,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .desc = "Scalable Vector Extension", .type = ARM64_CPUCAP_SYSTEM_FEATURE, .capability = ARM64_SVE, - .sys_reg = SYS_ID_AA64PFR0_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_EL1_SVE_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64PFR0_EL1_SVE_IMP, - .matches = has_cpuid_feature, .cpu_enable = sve_kernel_enable, + .matches = has_cpuid_feature, + ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, SVE, IMP) }, #endif /* CONFIG_ARM64_SVE */ #ifdef CONFIG_ARM64_RAS_EXTN @@ -2382,12 +2343,8 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_RAS_EXTN, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64PFR0_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_EL1_RAS_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64PFR0_EL1_RAS_IMP, .cpu_enable = cpu_clear_disr, + ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, RAS, IMP) }, #endif /* CONFIG_ARM64_RAS_EXTN */ #ifdef CONFIG_ARM64_AMU_EXTN @@ -2401,12 +2358,8 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_AMU_EXTN, .type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE, .matches = has_amu, - .sys_reg = SYS_ID_AA64PFR0_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_EL1_AMU_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64PFR0_EL1_AMU_IMP, .cpu_enable = cpu_amu_enable, + ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, AMU, IMP) }, #endif /* CONFIG_ARM64_AMU_EXTN */ { @@ -2426,34 +2379,22 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .desc = "Stage-2 Force Write-Back", .type = ARM64_CPUCAP_SYSTEM_FEATURE, .capability = ARM64_HAS_STAGE2_FWB, - .sys_reg = SYS_ID_AA64MMFR2_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR2_EL1_FWB_SHIFT, - .field_width = 4, - .min_field_value = 1, .matches = has_cpuid_feature, + ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, FWB, IMP) }, { .desc = "ARMv8.4 Translation Table Level", .type = ARM64_CPUCAP_SYSTEM_FEATURE, .capability = ARM64_HAS_ARMv8_4_TTL, - .sys_reg = SYS_ID_AA64MMFR2_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR2_EL1_TTL_SHIFT, - .field_width = 4, - .min_field_value = 1, .matches = has_cpuid_feature, + ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, TTL, IMP) }, { .desc = "TLB range maintenance instructions", .capability = ARM64_HAS_TLB_RANGE, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64ISAR0_EL1, - .field_pos = ID_AA64ISAR0_EL1_TLB_SHIFT, - .field_width = 4, - .sign = FTR_UNSIGNED, - .min_field_value = ID_AA64ISAR0_EL1_TLB_RANGE, + ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, TLB, RANGE) }, #ifdef CONFIG_ARM64_HW_AFDBM { @@ -2467,13 +2408,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { */ .type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE, .capability = ARM64_HW_DBM, - .sys_reg = SYS_ID_AA64MMFR1_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR1_EL1_HAFDBS_SHIFT, - .field_width = 4, - .min_field_value = 2, .matches = has_hw_dbm, .cpu_enable = cpu_enable_hw_dbm, + ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, HAFDBS, DBM) }, #endif { @@ -2481,21 +2418,14 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_CRC32, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64ISAR0_EL1, - .field_pos = ID_AA64ISAR0_EL1_CRC32_SHIFT, - .field_width = 4, - .min_field_value = 1, + ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, CRC32, IMP) }, { .desc = "Speculative Store Bypassing Safe (SSBS)", .capability = ARM64_SSBS, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64PFR1_EL1, - .field_pos = ID_AA64PFR1_EL1_SSBS_SHIFT, - .field_width = 4, - .sign = FTR_UNSIGNED, - .min_field_value = ID_AA64PFR1_EL1_SSBS_IMP, + ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SSBS, IMP) }, #ifdef CONFIG_ARM64_CNP { @@ -2503,12 +2433,8 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_CNP, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_useable_cnp, - .sys_reg = SYS_ID_AA64MMFR2_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR2_EL1_CnP_SHIFT, - .field_width = 4, - .min_field_value = 1, .cpu_enable = cpu_enable_cnp, + ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, CnP, IMP) }, #endif { @@ -2516,45 +2442,29 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_SB, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64ISAR1_EL1, - .field_pos = ID_AA64ISAR1_EL1_SB_SHIFT, - .field_width = 4, - .sign = FTR_UNSIGNED, - .min_field_value = 1, + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, SB, IMP) }, #ifdef CONFIG_ARM64_PTR_AUTH { .desc = "Address authentication (architected QARMA5 algorithm)", .capability = ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA5, .type = ARM64_CPUCAP_BOOT_CPU_FEATURE, - .sys_reg = SYS_ID_AA64ISAR1_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64ISAR1_EL1_APA_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64ISAR1_EL1_APA_PAuth, .matches = has_address_auth_cpucap, + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, APA, PAuth) }, { .desc = "Address authentication (architected QARMA3 algorithm)", .capability = ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA3, .type = ARM64_CPUCAP_BOOT_CPU_FEATURE, - .sys_reg = SYS_ID_AA64ISAR2_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64ISAR2_EL1_APA3_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64ISAR2_EL1_APA3_PAuth, .matches = has_address_auth_cpucap, + ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, APA3, PAuth) }, { .desc = "Address authentication (IMP DEF algorithm)", .capability = ARM64_HAS_ADDRESS_AUTH_IMP_DEF, .type = ARM64_CPUCAP_BOOT_CPU_FEATURE, - .sys_reg = SYS_ID_AA64ISAR1_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64ISAR1_EL1_API_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64ISAR1_EL1_API_PAuth, .matches = has_address_auth_cpucap, + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, API, PAuth) }, { .capability = ARM64_HAS_ADDRESS_AUTH, @@ -2565,34 +2475,22 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .desc = "Generic authentication (architected QARMA5 algorithm)", .capability = ARM64_HAS_GENERIC_AUTH_ARCH_QARMA5, .type = ARM64_CPUCAP_SYSTEM_FEATURE, - .sys_reg = SYS_ID_AA64ISAR1_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64ISAR1_EL1_GPA_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64ISAR1_EL1_GPA_IMP, .matches = has_cpuid_feature, + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, GPA, IMP) }, { .desc = "Generic authentication (architected QARMA3 algorithm)", .capability = ARM64_HAS_GENERIC_AUTH_ARCH_QARMA3, .type = ARM64_CPUCAP_SYSTEM_FEATURE, - .sys_reg = SYS_ID_AA64ISAR2_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64ISAR2_EL1_GPA3_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64ISAR2_EL1_GPA3_IMP, .matches = has_cpuid_feature, + ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, GPA3, IMP) }, { .desc = "Generic authentication (IMP DEF algorithm)", .capability = ARM64_HAS_GENERIC_AUTH_IMP_DEF, .type = ARM64_CPUCAP_SYSTEM_FEATURE, - .sys_reg = SYS_ID_AA64ISAR1_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64ISAR1_EL1_GPI_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64ISAR1_EL1_GPI_IMP, .matches = has_cpuid_feature, + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, GPI, IMP) }, { .capability = ARM64_HAS_GENERIC_AUTH, @@ -2624,13 +2522,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .desc = "E0PD", .capability = ARM64_HAS_E0PD, .type = ARM64_CPUCAP_SYSTEM_FEATURE, - .sys_reg = SYS_ID_AA64MMFR2_EL1, - .sign = FTR_UNSIGNED, - .field_width = 4, - .field_pos = ID_AA64MMFR2_EL1_E0PD_SHIFT, - .matches = has_cpuid_feature, - .min_field_value = 1, .cpu_enable = cpu_enable_e0pd, + .matches = has_cpuid_feature, + ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, E0PD, IMP) }, #endif { @@ -2638,11 +2532,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_RNG, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64ISAR0_EL1, - .field_pos = ID_AA64ISAR0_EL1_RNDR_SHIFT, - .field_width = 4, - .sign = FTR_UNSIGNED, - .min_field_value = 1, + ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, RNDR, IMP) }, #ifdef CONFIG_ARM64_BTI { @@ -2655,11 +2545,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { #endif .matches = has_cpuid_feature, .cpu_enable = bti_enable, - .sys_reg = SYS_ID_AA64PFR1_EL1, - .field_pos = ID_AA64PFR1_EL1_BT_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64PFR1_EL1_BT_IMP, - .sign = FTR_UNSIGNED, + ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, BT, IMP) }, #endif #ifdef CONFIG_ARM64_MTE @@ -2668,120 +2554,80 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_MTE, .type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64PFR1_EL1, - .field_pos = ID_AA64PFR1_EL1_MTE_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64PFR1_EL1_MTE_MTE2, - .sign = FTR_UNSIGNED, .cpu_enable = cpu_enable_mte, + ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, MTE, MTE2) }, { .desc = "Asymmetric MTE Tag Check Fault", .capability = ARM64_MTE_ASYMM, .type = ARM64_CPUCAP_BOOT_CPU_FEATURE, .matches = has_cpuid_feature, - .sys_reg = SYS_ID_AA64PFR1_EL1, - .field_pos = ID_AA64PFR1_EL1_MTE_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64PFR1_EL1_MTE_MTE3, - .sign = FTR_UNSIGNED, + ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, MTE, MTE3) }, #endif /* CONFIG_ARM64_MTE */ { .desc = "RCpc load-acquire (LDAPR)", .capability = ARM64_HAS_LDAPR, .type = ARM64_CPUCAP_SYSTEM_FEATURE, - .sys_reg = SYS_ID_AA64ISAR1_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64ISAR1_EL1_LRCPC_SHIFT, - .field_width = 4, .matches = has_cpuid_feature, - .min_field_value = 1, + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, LRCPC, IMP) }, #ifdef CONFIG_ARM64_SME { .desc = "Scalable Matrix Extension", .type = ARM64_CPUCAP_SYSTEM_FEATURE, .capability = ARM64_SME, - .sys_reg = SYS_ID_AA64PFR1_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR1_EL1_SME_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64PFR1_EL1_SME_IMP, .matches = has_cpuid_feature, .cpu_enable = sme_kernel_enable, + ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SME, IMP) }, /* FA64 should be sorted after the base SME capability */ { .desc = "FA64", .type = ARM64_CPUCAP_SYSTEM_FEATURE, .capability = ARM64_SME_FA64, - .sys_reg = SYS_ID_AA64SMFR0_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64SMFR0_EL1_FA64_SHIFT, - .field_width = 1, - .min_field_value = ID_AA64SMFR0_EL1_FA64_IMP, .matches = has_cpuid_feature, .cpu_enable = fa64_kernel_enable, + ARM64_CPUID_FIELDS(ID_AA64SMFR0_EL1, FA64, IMP) }, { .desc = "SME2", .type = ARM64_CPUCAP_SYSTEM_FEATURE, .capability = ARM64_SME2, - .sys_reg = SYS_ID_AA64PFR1_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR1_EL1_SME_SHIFT, - .field_width = ID_AA64PFR1_EL1_SME_WIDTH, - .min_field_value = ID_AA64PFR1_EL1_SME_SME2, .matches = has_cpuid_feature, .cpu_enable = sme2_kernel_enable, + ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SME, SME2) }, #endif /* CONFIG_ARM64_SME */ { .desc = "WFx with timeout", .capability = ARM64_HAS_WFXT, .type = ARM64_CPUCAP_SYSTEM_FEATURE, - .sys_reg = SYS_ID_AA64ISAR2_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64ISAR2_EL1_WFxT_SHIFT, - .field_width = 4, .matches = has_cpuid_feature, - .min_field_value = ID_AA64ISAR2_EL1_WFxT_IMP, + ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, WFxT, IMP) }, { .desc = "Trap EL0 IMPLEMENTATION DEFINED functionality", .capability = ARM64_HAS_TIDCP1, .type = ARM64_CPUCAP_SYSTEM_FEATURE, - .sys_reg = SYS_ID_AA64MMFR1_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64MMFR1_EL1_TIDCP1_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64MMFR1_EL1_TIDCP1_IMP, .matches = has_cpuid_feature, .cpu_enable = cpu_trap_el0_impdef, + ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, TIDCP1, IMP) }, { .desc = "Data independent timing control (DIT)", .capability = ARM64_HAS_DIT, .type = ARM64_CPUCAP_SYSTEM_FEATURE, - .sys_reg = SYS_ID_AA64PFR0_EL1, - .sign = FTR_UNSIGNED, - .field_pos = ID_AA64PFR0_EL1_DIT_SHIFT, - .field_width = 4, - .min_field_value = ID_AA64PFR0_EL1_DIT_IMP, .matches = has_cpuid_feature, .cpu_enable = cpu_enable_dit, + ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, DIT, IMP) }, {}, }; #define HWCAP_CPUID_MATCH(reg, field, min_value) \ - .matches = has_user_cpuid_feature, \ - .sys_reg = SYS_##reg, \ - .field_pos = reg##_##field##_SHIFT, \ - .field_width = reg##_##field##_WIDTH, \ - .sign = reg##_##field##_SIGNED, \ - .min_field_value = reg##_##field##_##min_value, + .matches = has_user_cpuid_feature, \ + ARM64_CPUID_FIELDS(reg, field, min_value) #define __HWCAP_CAP(name, cap_type, cap) \ .desc = name, \ @@ -2811,26 +2657,26 @@ static const struct arm64_cpu_capabilities arm64_features[] = { #ifdef CONFIG_ARM64_PTR_AUTH static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = { { - HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, APA, PAuth) + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, APA, PAuth) }, { - HWCAP_CPUID_MATCH(ID_AA64ISAR2_EL1, APA3, PAuth) + ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, APA3, PAuth) }, { - HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, API, PAuth) + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, API, PAuth) }, {}, }; static const struct arm64_cpu_capabilities ptr_auth_hwcap_gen_matches[] = { { - HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, GPA, IMP) + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, GPA, IMP) }, { - HWCAP_CPUID_MATCH(ID_AA64ISAR2_EL1, GPA3, IMP) + ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, GPA3, IMP) }, { - HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, GPI, IMP) + ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, GPI, IMP) }, {}, }; diff --git a/arch/arm64/kernel/crash_core.c b/arch/arm64/kernel/crash_core.c index 2b65aae332ce..66cde752cd74 100644 --- a/arch/arm64/kernel/crash_core.c +++ b/arch/arm64/kernel/crash_core.c @@ -8,6 +8,7 @@ #include <asm/cpufeature.h> #include <asm/memory.h> #include <asm/pgtable-hwdef.h> +#include <asm/pointer_auth.h> static inline u64 get_tcr_el1_t1sz(void); diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 3da09778267e..64f2ecbdfe5c 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -438,6 +438,11 @@ int kernel_active_single_step(void) } NOKPROBE_SYMBOL(kernel_active_single_step); +void kernel_rewind_single_step(struct pt_regs *regs) +{ + set_regs_spsr_ss(regs); +} + /* ptrace API */ void user_enable_single_step(struct task_struct *task) { diff --git a/arch/arm64/kernel/efi-header.S b/arch/arm64/kernel/efi-header.S index 28d8a5dca5f1..d731b4655df8 100644 --- a/arch/arm64/kernel/efi-header.S +++ b/arch/arm64/kernel/efi-header.S @@ -66,7 +66,7 @@ .long .Lefi_header_end - .L_head // SizeOfHeaders .long 0 // CheckSum .short IMAGE_SUBSYSTEM_EFI_APPLICATION // Subsystem - .short 0 // DllCharacteristics + .short IMAGE_DLL_CHARACTERISTICS_NX_COMPAT // DllCharacteristics .quad 0 // SizeOfStackReserve .quad 0 // SizeOfStackCommit .quad 0 // SizeOfHeapReserve diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S index 350ed81324ac..1c38a60575aa 100644 --- a/arch/arm64/kernel/entry-ftrace.S +++ b/arch/arm64/kernel/entry-ftrace.S @@ -36,6 +36,31 @@ SYM_CODE_START(ftrace_caller) bti c +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS + /* + * The literal pointer to the ops is at an 8-byte aligned boundary + * which is either 12 or 16 bytes before the BL instruction in the call + * site. See ftrace_call_adjust() for details. + * + * Therefore here the LR points at `literal + 16` or `literal + 20`, + * and we can find the address of the literal in either case by + * aligning to an 8-byte boundary and subtracting 16. We do the + * alignment first as this allows us to fold the subtraction into the + * LDR. + */ + bic x11, x30, 0x7 + ldr x11, [x11, #-(4 * AARCH64_INSN_SIZE)] // op + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS + /* + * If the op has a direct call, handle it immediately without + * saving/restoring registers. + */ + ldr x17, [x11, #FTRACE_OPS_DIRECT_CALL] // op->direct_call + cbnz x17, ftrace_caller_direct +#endif +#endif + /* Save original SP */ mov x10, sp @@ -49,6 +74,10 @@ SYM_CODE_START(ftrace_caller) stp x6, x7, [sp, #FREGS_X6] str x8, [sp, #FREGS_X8] +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS + str xzr, [sp, #FREGS_DIRECT_TRAMP] +#endif + /* Save the callsite's FP, LR, SP */ str x29, [sp, #FREGS_FP] str x9, [sp, #FREGS_LR] @@ -71,20 +100,7 @@ SYM_CODE_START(ftrace_caller) mov x3, sp // regs #ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS - /* - * The literal pointer to the ops is at an 8-byte aligned boundary - * which is either 12 or 16 bytes before the BL instruction in the call - * site. See ftrace_call_adjust() for details. - * - * Therefore here the LR points at `literal + 16` or `literal + 20`, - * and we can find the address of the literal in either case by - * aligning to an 8-byte boundary and subtracting 16. We do the - * alignment first as this allows us to fold the subtraction into the - * LDR. - */ - bic x2, x30, 0x7 - ldr x2, [x2, #-16] // op - + mov x2, x11 // op ldr x4, [x2, #FTRACE_OPS_FUNC] // op->func blr x4 // op->func(ip, parent_ip, op, regs) @@ -107,8 +123,15 @@ SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL) ldp x6, x7, [sp, #FREGS_X6] ldr x8, [sp, #FREGS_X8] - /* Restore the callsite's FP, LR, PC */ + /* Restore the callsite's FP */ ldr x29, [sp, #FREGS_FP] + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS + ldr x17, [sp, #FREGS_DIRECT_TRAMP] + cbnz x17, ftrace_caller_direct_late +#endif + + /* Restore the callsite's LR and PC */ ldr x30, [sp, #FREGS_LR] ldr x9, [sp, #FREGS_PC] @@ -116,8 +139,45 @@ SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL) add sp, sp, #FREGS_SIZE + 32 ret x9 + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS +SYM_INNER_LABEL(ftrace_caller_direct_late, SYM_L_LOCAL) + /* + * Head to a direct trampoline in x17 after having run other tracers. + * The ftrace_regs are live, and x0-x8 and FP have been restored. The + * LR, PC, and SP have not been restored. + */ + + /* + * Restore the callsite's LR and PC matching the trampoline calling + * convention. + */ + ldr x9, [sp, #FREGS_LR] + ldr x30, [sp, #FREGS_PC] + + /* Restore the callsite's SP */ + add sp, sp, #FREGS_SIZE + 32 + +SYM_INNER_LABEL(ftrace_caller_direct, SYM_L_LOCAL) + /* + * Head to a direct trampoline in x17. + * + * We use `BR X17` as this can safely land on a `BTI C` or `PACIASP` in + * the trampoline, and will not unbalance any return stack. + */ + br x17 +#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */ SYM_CODE_END(ftrace_caller) +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS +SYM_CODE_START(ftrace_stub_direct_tramp) + bti c + mov x10, x30 + mov x30, x9 + ret x10 +SYM_CODE_END(ftrace_stub_direct_tramp) +#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */ + #else /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */ /* diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 9e7e50a0fd76..2fbafa5cc7ac 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -299,7 +299,7 @@ void task_set_vl_onexec(struct task_struct *task, enum vec_type type, /* * TIF_SME controls whether a task can use SME without trapping while * in userspace, when TIF_SME is set then we must have storage - * alocated in sve_state and sme_state to store the contents of both ZA + * allocated in sve_state and sme_state to store the contents of both ZA * and the SVE registers for both streaming and non-streaming modes. * * If both SVCR.ZA and SVCR.SM are disabled then at any point we @@ -1477,7 +1477,7 @@ void do_sve_acc(unsigned long esr, struct pt_regs *regs) * * TIF_SME should be clear on entry: otherwise, fpsimd_restore_current_state() * would have disabled the SME access trap for userspace during - * ret_to_user, making an SVE access trap impossible in that case. + * ret_to_user, making an SME access trap impossible in that case. */ void do_sme_acc(unsigned long esr, struct pt_regs *regs) { diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index 5545fe1a9012..432626c866a8 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c @@ -195,15 +195,22 @@ int ftrace_update_ftrace_func(ftrace_func_t func) return ftrace_modify_code(pc, 0, new, false); } -static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr) +static struct plt_entry *get_ftrace_plt(struct module *mod) { #ifdef CONFIG_ARM64_MODULE_PLTS struct plt_entry *plt = mod->arch.ftrace_trampolines; - if (addr == FTRACE_ADDR) - return &plt[FTRACE_PLT_IDX]; -#endif + return &plt[FTRACE_PLT_IDX]; +#else return NULL; +#endif +} + +static bool reachable_by_bl(unsigned long addr, unsigned long pc) +{ + long offset = (long)addr - (long)pc; + + return offset >= -SZ_128M && offset < SZ_128M; } /* @@ -220,14 +227,21 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec, unsigned long *addr) { unsigned long pc = rec->ip; - long offset = (long)*addr - (long)pc; struct plt_entry *plt; /* + * If a custom trampoline is unreachable, rely on the ftrace_caller + * trampoline which knows how to indirectly reach that trampoline + * through ops->direct_call. + */ + if (*addr != FTRACE_ADDR && !reachable_by_bl(*addr, pc)) + *addr = FTRACE_ADDR; + + /* * When the target is within range of the 'BL' instruction, use 'addr' * as-is and branch to that directly. */ - if (offset >= -SZ_128M && offset < SZ_128M) + if (reachable_by_bl(*addr, pc)) return true; /* @@ -256,7 +270,7 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec, if (WARN_ON(!mod)) return false; - plt = get_ftrace_plt(mod, *addr); + plt = get_ftrace_plt(mod); if (!plt) { pr_err("ftrace: no module PLT for %ps\n", (void *)*addr); return false; @@ -330,12 +344,24 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, unsigned long addr) { - if (WARN_ON_ONCE(old_addr != (unsigned long)ftrace_caller)) + unsigned long pc = rec->ip; + u32 old, new; + int ret; + + ret = ftrace_rec_set_ops(rec, arm64_rec_get_ops(rec)); + if (ret) + return ret; + + if (!ftrace_find_callable_addr(rec, NULL, &old_addr)) return -EINVAL; - if (WARN_ON_ONCE(addr != (unsigned long)ftrace_caller)) + if (!ftrace_find_callable_addr(rec, NULL, &addr)) return -EINVAL; - return ftrace_rec_update_ops(rec); + old = aarch64_insn_gen_branch_imm(pc, old_addr, + AARCH64_INSN_BRANCH_LINK); + new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK); + + return ftrace_modify_code(pc, old, new, true); } #endif diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c index d833d78a7f31..370ab84fd06e 100644 --- a/arch/arm64/kernel/idreg-override.c +++ b/arch/arm64/kernel/idreg-override.c @@ -167,7 +167,7 @@ static const struct { } aliases[] __initconst = { { "kvm-arm.mode=nvhe", "id_aa64mmfr1.vh=0" }, { "kvm-arm.mode=protected", "id_aa64mmfr1.vh=0" }, - { "arm64.nosve", "id_aa64pfr0.sve=0 id_aa64pfr1.sme=0" }, + { "arm64.nosve", "id_aa64pfr0.sve=0" }, { "arm64.nosme", "id_aa64pfr1.sme=0" }, { "arm64.nobti", "id_aa64pfr1.bt=0" }, { "arm64.nopauth", @@ -178,6 +178,13 @@ static const struct { { "nokaslr", "kaslr.disabled=1" }, }; +static int __init parse_nokaslr(char *unused) +{ + /* nokaslr param handling is done by early cpufeature code */ + return 0; +} +early_param("nokaslr", parse_nokaslr); + static int __init find_field(const char *cmdline, const struct ftr_set_desc *reg, int f, u64 *v) { diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c index cda9c1e9864f..4e1f983df3d1 100644 --- a/arch/arm64/kernel/kgdb.c +++ b/arch/arm64/kernel/kgdb.c @@ -224,6 +224,8 @@ int kgdb_arch_handle_exception(int exception_vector, int signo, */ if (!kernel_active_single_step()) kernel_enable_single_step(linux_regs); + else + kernel_rewind_single_step(linux_regs); err = 0; break; default: diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c index ce3d40120f72..078910db77a4 100644 --- a/arch/arm64/kernel/machine_kexec.c +++ b/arch/arm64/kernel/machine_kexec.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/kexec.h> #include <linux/page-flags.h> +#include <linux/reboot.h> #include <linux/set_memory.h> #include <linux/smp.h> @@ -102,7 +103,7 @@ static void kexec_segment_flush(const struct kimage *kimage) /* Allocates pages for kexec page table */ static void *kexec_page_alloc(void *arg) { - struct kimage *kimage = (struct kimage *)arg; + struct kimage *kimage = arg; struct page *page = kimage_alloc_control_pages(kimage, 0); void *vaddr = NULL; @@ -268,26 +269,6 @@ void machine_crash_shutdown(struct pt_regs *regs) pr_info("Starting crashdump kernel...\n"); } -void arch_kexec_protect_crashkres(void) -{ - int i; - - for (i = 0; i < kexec_crash_image->nr_segments; i++) - set_memory_valid( - __phys_to_virt(kexec_crash_image->segment[i].mem), - kexec_crash_image->segment[i].memsz >> PAGE_SHIFT, 0); -} - -void arch_kexec_unprotect_crashkres(void) -{ - int i; - - for (i = 0; i < kexec_crash_image->nr_segments; i++) - set_memory_valid( - __phys_to_virt(kexec_crash_image->segment[i].mem), - kexec_crash_image->segment[i].memsz >> PAGE_SHIFT, 1); -} - #ifdef CONFIG_HIBERNATION /* * To preserve the crash dump kernel image, the relevant memory segments diff --git a/arch/arm64/kernel/perf_callchain.c b/arch/arm64/kernel/perf_callchain.c index 65b196e3ca6c..6d157f32187b 100644 --- a/arch/arm64/kernel/perf_callchain.c +++ b/arch/arm64/kernel/perf_callchain.c @@ -38,7 +38,7 @@ user_backtrace(struct frame_tail __user *tail, if (err) return NULL; - lr = ptrauth_strip_insn_pac(buftail.lr); + lr = ptrauth_strip_user_insn_pac(buftail.lr); perf_callchain_store(entry, lr); diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c deleted file mode 100644 index dde06c0f97f3..000000000000 --- a/arch/arm64/kernel/perf_event.c +++ /dev/null @@ -1,1467 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * ARMv8 PMUv3 Performance Events handling code. - * - * Copyright (C) 2012 ARM Limited - * Author: Will Deacon <will.deacon@arm.com> - * - * This code is based heavily on the ARMv7 perf event code. - */ - -#include <asm/irq_regs.h> -#include <asm/perf_event.h> -#include <asm/sysreg.h> -#include <asm/virt.h> - -#include <clocksource/arm_arch_timer.h> - -#include <linux/acpi.h> -#include <linux/clocksource.h> -#include <linux/kvm_host.h> -#include <linux/of.h> -#include <linux/perf/arm_pmu.h> -#include <linux/platform_device.h> -#include <linux/sched_clock.h> -#include <linux/smp.h> - -/* ARMv8 Cortex-A53 specific event types. */ -#define ARMV8_A53_PERFCTR_PREF_LINEFILL 0xC2 - -/* ARMv8 Cavium ThunderX specific event types. */ -#define ARMV8_THUNDER_PERFCTR_L1D_CACHE_MISS_ST 0xE9 -#define ARMV8_THUNDER_PERFCTR_L1D_CACHE_PREF_ACCESS 0xEA -#define ARMV8_THUNDER_PERFCTR_L1D_CACHE_PREF_MISS 0xEB -#define ARMV8_THUNDER_PERFCTR_L1I_CACHE_PREF_ACCESS 0xEC -#define ARMV8_THUNDER_PERFCTR_L1I_CACHE_PREF_MISS 0xED - -/* - * ARMv8 Architectural defined events, not all of these may - * be supported on any given implementation. Unsupported events will - * be disabled at run-time based on the PMCEID registers. - */ -static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = { - PERF_MAP_ALL_UNSUPPORTED, - [PERF_COUNT_HW_CPU_CYCLES] = ARMV8_PMUV3_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV8_PMUV3_PERFCTR_INST_RETIRED, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV8_PMUV3_PERFCTR_L1D_CACHE, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV8_PMUV3_PERFCTR_BR_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV8_PMUV3_PERFCTR_BUS_CYCLES, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV8_PMUV3_PERFCTR_STALL_FRONTEND, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV8_PMUV3_PERFCTR_STALL_BACKEND, -}; - -static const unsigned armv8_pmuv3_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1D_CACHE, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL, - - [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1I_CACHE, - [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL, - - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL, - [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1D_TLB, - - [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL, - [C(ITLB)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1I_TLB, - - [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD, - [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_LL_CACHE_RD, - - [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_BR_PRED, - [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_BR_MIS_PRED, -}; - -static const unsigned armv8_a53_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - [C(L1D)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV8_A53_PERFCTR_PREF_LINEFILL, - - [C(NODE)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_RD, - [C(NODE)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_WR, -}; - -static const unsigned armv8_a57_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_RD, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_WR, - - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_RD, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_WR, - - [C(NODE)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_RD, - [C(NODE)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_WR, -}; - -static const unsigned armv8_a73_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR, -}; - -static const unsigned armv8_thunder_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_RD, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_THUNDER_PERFCTR_L1D_CACHE_MISS_ST, - [C(L1D)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV8_THUNDER_PERFCTR_L1D_CACHE_PREF_ACCESS, - [C(L1D)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV8_THUNDER_PERFCTR_L1D_CACHE_PREF_MISS, - - [C(L1I)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV8_THUNDER_PERFCTR_L1I_CACHE_PREF_ACCESS, - [C(L1I)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV8_THUNDER_PERFCTR_L1I_CACHE_PREF_MISS, - - [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_RD, - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_RD, - [C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_WR, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_WR, -}; - -static const unsigned armv8_vulcan_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - PERF_CACHE_MAP_ALL_UNSUPPORTED, - - [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD, - [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_RD, - [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR, - [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_WR, - - [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_RD, - [C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_WR, - [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_RD, - [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_WR, - - [C(NODE)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_RD, - [C(NODE)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_WR, -}; - -static ssize_t -armv8pmu_events_sysfs_show(struct device *dev, - struct device_attribute *attr, char *page) -{ - struct perf_pmu_events_attr *pmu_attr; - - pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr); - - return sprintf(page, "event=0x%04llx\n", pmu_attr->id); -} - -#define ARMV8_EVENT_ATTR(name, config) \ - PMU_EVENT_ATTR_ID(name, armv8pmu_events_sysfs_show, config) - -static struct attribute *armv8_pmuv3_event_attrs[] = { - ARMV8_EVENT_ATTR(sw_incr, ARMV8_PMUV3_PERFCTR_SW_INCR), - ARMV8_EVENT_ATTR(l1i_cache_refill, ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL), - ARMV8_EVENT_ATTR(l1i_tlb_refill, ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL), - ARMV8_EVENT_ATTR(l1d_cache_refill, ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL), - ARMV8_EVENT_ATTR(l1d_cache, ARMV8_PMUV3_PERFCTR_L1D_CACHE), - ARMV8_EVENT_ATTR(l1d_tlb_refill, ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL), - ARMV8_EVENT_ATTR(ld_retired, ARMV8_PMUV3_PERFCTR_LD_RETIRED), - ARMV8_EVENT_ATTR(st_retired, ARMV8_PMUV3_PERFCTR_ST_RETIRED), - ARMV8_EVENT_ATTR(inst_retired, ARMV8_PMUV3_PERFCTR_INST_RETIRED), - ARMV8_EVENT_ATTR(exc_taken, ARMV8_PMUV3_PERFCTR_EXC_TAKEN), - ARMV8_EVENT_ATTR(exc_return, ARMV8_PMUV3_PERFCTR_EXC_RETURN), - ARMV8_EVENT_ATTR(cid_write_retired, ARMV8_PMUV3_PERFCTR_CID_WRITE_RETIRED), - ARMV8_EVENT_ATTR(pc_write_retired, ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED), - ARMV8_EVENT_ATTR(br_immed_retired, ARMV8_PMUV3_PERFCTR_BR_IMMED_RETIRED), - ARMV8_EVENT_ATTR(br_return_retired, ARMV8_PMUV3_PERFCTR_BR_RETURN_RETIRED), - ARMV8_EVENT_ATTR(unaligned_ldst_retired, ARMV8_PMUV3_PERFCTR_UNALIGNED_LDST_RETIRED), - ARMV8_EVENT_ATTR(br_mis_pred, ARMV8_PMUV3_PERFCTR_BR_MIS_PRED), - ARMV8_EVENT_ATTR(cpu_cycles, ARMV8_PMUV3_PERFCTR_CPU_CYCLES), - ARMV8_EVENT_ATTR(br_pred, ARMV8_PMUV3_PERFCTR_BR_PRED), - ARMV8_EVENT_ATTR(mem_access, ARMV8_PMUV3_PERFCTR_MEM_ACCESS), - ARMV8_EVENT_ATTR(l1i_cache, ARMV8_PMUV3_PERFCTR_L1I_CACHE), - ARMV8_EVENT_ATTR(l1d_cache_wb, ARMV8_PMUV3_PERFCTR_L1D_CACHE_WB), - ARMV8_EVENT_ATTR(l2d_cache, ARMV8_PMUV3_PERFCTR_L2D_CACHE), - ARMV8_EVENT_ATTR(l2d_cache_refill, ARMV8_PMUV3_PERFCTR_L2D_CACHE_REFILL), - ARMV8_EVENT_ATTR(l2d_cache_wb, ARMV8_PMUV3_PERFCTR_L2D_CACHE_WB), - ARMV8_EVENT_ATTR(bus_access, ARMV8_PMUV3_PERFCTR_BUS_ACCESS), - ARMV8_EVENT_ATTR(memory_error, ARMV8_PMUV3_PERFCTR_MEMORY_ERROR), - ARMV8_EVENT_ATTR(inst_spec, ARMV8_PMUV3_PERFCTR_INST_SPEC), - ARMV8_EVENT_ATTR(ttbr_write_retired, ARMV8_PMUV3_PERFCTR_TTBR_WRITE_RETIRED), - ARMV8_EVENT_ATTR(bus_cycles, ARMV8_PMUV3_PERFCTR_BUS_CYCLES), - /* Don't expose the chain event in /sys, since it's useless in isolation */ - ARMV8_EVENT_ATTR(l1d_cache_allocate, ARMV8_PMUV3_PERFCTR_L1D_CACHE_ALLOCATE), - ARMV8_EVENT_ATTR(l2d_cache_allocate, ARMV8_PMUV3_PERFCTR_L2D_CACHE_ALLOCATE), - ARMV8_EVENT_ATTR(br_retired, ARMV8_PMUV3_PERFCTR_BR_RETIRED), - ARMV8_EVENT_ATTR(br_mis_pred_retired, ARMV8_PMUV3_PERFCTR_BR_MIS_PRED_RETIRED), - ARMV8_EVENT_ATTR(stall_frontend, ARMV8_PMUV3_PERFCTR_STALL_FRONTEND), - ARMV8_EVENT_ATTR(stall_backend, ARMV8_PMUV3_PERFCTR_STALL_BACKEND), - ARMV8_EVENT_ATTR(l1d_tlb, ARMV8_PMUV3_PERFCTR_L1D_TLB), - ARMV8_EVENT_ATTR(l1i_tlb, ARMV8_PMUV3_PERFCTR_L1I_TLB), - ARMV8_EVENT_ATTR(l2i_cache, ARMV8_PMUV3_PERFCTR_L2I_CACHE), - ARMV8_EVENT_ATTR(l2i_cache_refill, ARMV8_PMUV3_PERFCTR_L2I_CACHE_REFILL), - ARMV8_EVENT_ATTR(l3d_cache_allocate, ARMV8_PMUV3_PERFCTR_L3D_CACHE_ALLOCATE), - ARMV8_EVENT_ATTR(l3d_cache_refill, ARMV8_PMUV3_PERFCTR_L3D_CACHE_REFILL), - ARMV8_EVENT_ATTR(l3d_cache, ARMV8_PMUV3_PERFCTR_L3D_CACHE), - ARMV8_EVENT_ATTR(l3d_cache_wb, ARMV8_PMUV3_PERFCTR_L3D_CACHE_WB), - ARMV8_EVENT_ATTR(l2d_tlb_refill, ARMV8_PMUV3_PERFCTR_L2D_TLB_REFILL), - ARMV8_EVENT_ATTR(l2i_tlb_refill, ARMV8_PMUV3_PERFCTR_L2I_TLB_REFILL), - ARMV8_EVENT_ATTR(l2d_tlb, ARMV8_PMUV3_PERFCTR_L2D_TLB), - ARMV8_EVENT_ATTR(l2i_tlb, ARMV8_PMUV3_PERFCTR_L2I_TLB), - ARMV8_EVENT_ATTR(remote_access, ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS), - ARMV8_EVENT_ATTR(ll_cache, ARMV8_PMUV3_PERFCTR_LL_CACHE), - ARMV8_EVENT_ATTR(ll_cache_miss, ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS), - ARMV8_EVENT_ATTR(dtlb_walk, ARMV8_PMUV3_PERFCTR_DTLB_WALK), - ARMV8_EVENT_ATTR(itlb_walk, ARMV8_PMUV3_PERFCTR_ITLB_WALK), - ARMV8_EVENT_ATTR(ll_cache_rd, ARMV8_PMUV3_PERFCTR_LL_CACHE_RD), - ARMV8_EVENT_ATTR(ll_cache_miss_rd, ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD), - ARMV8_EVENT_ATTR(remote_access_rd, ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS_RD), - ARMV8_EVENT_ATTR(l1d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L1D_CACHE_LMISS_RD), - ARMV8_EVENT_ATTR(op_retired, ARMV8_PMUV3_PERFCTR_OP_RETIRED), - ARMV8_EVENT_ATTR(op_spec, ARMV8_PMUV3_PERFCTR_OP_SPEC), - ARMV8_EVENT_ATTR(stall, ARMV8_PMUV3_PERFCTR_STALL), - ARMV8_EVENT_ATTR(stall_slot_backend, ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND), - ARMV8_EVENT_ATTR(stall_slot_frontend, ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND), - ARMV8_EVENT_ATTR(stall_slot, ARMV8_PMUV3_PERFCTR_STALL_SLOT), - ARMV8_EVENT_ATTR(sample_pop, ARMV8_SPE_PERFCTR_SAMPLE_POP), - ARMV8_EVENT_ATTR(sample_feed, ARMV8_SPE_PERFCTR_SAMPLE_FEED), - ARMV8_EVENT_ATTR(sample_filtrate, ARMV8_SPE_PERFCTR_SAMPLE_FILTRATE), - ARMV8_EVENT_ATTR(sample_collision, ARMV8_SPE_PERFCTR_SAMPLE_COLLISION), - ARMV8_EVENT_ATTR(cnt_cycles, ARMV8_AMU_PERFCTR_CNT_CYCLES), - ARMV8_EVENT_ATTR(stall_backend_mem, ARMV8_AMU_PERFCTR_STALL_BACKEND_MEM), - ARMV8_EVENT_ATTR(l1i_cache_lmiss, ARMV8_PMUV3_PERFCTR_L1I_CACHE_LMISS), - ARMV8_EVENT_ATTR(l2d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L2D_CACHE_LMISS_RD), - ARMV8_EVENT_ATTR(l2i_cache_lmiss, ARMV8_PMUV3_PERFCTR_L2I_CACHE_LMISS), - ARMV8_EVENT_ATTR(l3d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L3D_CACHE_LMISS_RD), - ARMV8_EVENT_ATTR(trb_wrap, ARMV8_PMUV3_PERFCTR_TRB_WRAP), - ARMV8_EVENT_ATTR(trb_trig, ARMV8_PMUV3_PERFCTR_TRB_TRIG), - ARMV8_EVENT_ATTR(trcextout0, ARMV8_PMUV3_PERFCTR_TRCEXTOUT0), - ARMV8_EVENT_ATTR(trcextout1, ARMV8_PMUV3_PERFCTR_TRCEXTOUT1), - ARMV8_EVENT_ATTR(trcextout2, ARMV8_PMUV3_PERFCTR_TRCEXTOUT2), - ARMV8_EVENT_ATTR(trcextout3, ARMV8_PMUV3_PERFCTR_TRCEXTOUT3), - ARMV8_EVENT_ATTR(cti_trigout4, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT4), - ARMV8_EVENT_ATTR(cti_trigout5, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT5), - ARMV8_EVENT_ATTR(cti_trigout6, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT6), - ARMV8_EVENT_ATTR(cti_trigout7, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT7), - ARMV8_EVENT_ATTR(ldst_align_lat, ARMV8_PMUV3_PERFCTR_LDST_ALIGN_LAT), - ARMV8_EVENT_ATTR(ld_align_lat, ARMV8_PMUV3_PERFCTR_LD_ALIGN_LAT), - ARMV8_EVENT_ATTR(st_align_lat, ARMV8_PMUV3_PERFCTR_ST_ALIGN_LAT), - ARMV8_EVENT_ATTR(mem_access_checked, ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED), - ARMV8_EVENT_ATTR(mem_access_checked_rd, ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_RD), - ARMV8_EVENT_ATTR(mem_access_checked_wr, ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_WR), - NULL, -}; - -static umode_t -armv8pmu_event_attr_is_visible(struct kobject *kobj, - struct attribute *attr, int unused) -{ - struct device *dev = kobj_to_dev(kobj); - struct pmu *pmu = dev_get_drvdata(dev); - struct arm_pmu *cpu_pmu = container_of(pmu, struct arm_pmu, pmu); - struct perf_pmu_events_attr *pmu_attr; - - pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr.attr); - - if (pmu_attr->id < ARMV8_PMUV3_MAX_COMMON_EVENTS && - test_bit(pmu_attr->id, cpu_pmu->pmceid_bitmap)) - return attr->mode; - - if (pmu_attr->id >= ARMV8_PMUV3_EXT_COMMON_EVENT_BASE) { - u64 id = pmu_attr->id - ARMV8_PMUV3_EXT_COMMON_EVENT_BASE; - - if (id < ARMV8_PMUV3_MAX_COMMON_EVENTS && - test_bit(id, cpu_pmu->pmceid_ext_bitmap)) - return attr->mode; - } - - return 0; -} - -static const struct attribute_group armv8_pmuv3_events_attr_group = { - .name = "events", - .attrs = armv8_pmuv3_event_attrs, - .is_visible = armv8pmu_event_attr_is_visible, -}; - -PMU_FORMAT_ATTR(event, "config:0-15"); -PMU_FORMAT_ATTR(long, "config1:0"); -PMU_FORMAT_ATTR(rdpmc, "config1:1"); - -static int sysctl_perf_user_access __read_mostly; - -static inline bool armv8pmu_event_is_64bit(struct perf_event *event) -{ - return event->attr.config1 & 0x1; -} - -static inline bool armv8pmu_event_want_user_access(struct perf_event *event) -{ - return event->attr.config1 & 0x2; -} - -static struct attribute *armv8_pmuv3_format_attrs[] = { - &format_attr_event.attr, - &format_attr_long.attr, - &format_attr_rdpmc.attr, - NULL, -}; - -static const struct attribute_group armv8_pmuv3_format_attr_group = { - .name = "format", - .attrs = armv8_pmuv3_format_attrs, -}; - -static ssize_t slots_show(struct device *dev, struct device_attribute *attr, - char *page) -{ - struct pmu *pmu = dev_get_drvdata(dev); - struct arm_pmu *cpu_pmu = container_of(pmu, struct arm_pmu, pmu); - u32 slots = cpu_pmu->reg_pmmir & ARMV8_PMU_SLOTS_MASK; - - return sysfs_emit(page, "0x%08x\n", slots); -} - -static DEVICE_ATTR_RO(slots); - -static ssize_t bus_slots_show(struct device *dev, struct device_attribute *attr, - char *page) -{ - struct pmu *pmu = dev_get_drvdata(dev); - struct arm_pmu *cpu_pmu = container_of(pmu, struct arm_pmu, pmu); - u32 bus_slots = (cpu_pmu->reg_pmmir >> ARMV8_PMU_BUS_SLOTS_SHIFT) - & ARMV8_PMU_BUS_SLOTS_MASK; - - return sysfs_emit(page, "0x%08x\n", bus_slots); -} - -static DEVICE_ATTR_RO(bus_slots); - -static ssize_t bus_width_show(struct device *dev, struct device_attribute *attr, - char *page) -{ - struct pmu *pmu = dev_get_drvdata(dev); - struct arm_pmu *cpu_pmu = container_of(pmu, struct arm_pmu, pmu); - u32 bus_width = (cpu_pmu->reg_pmmir >> ARMV8_PMU_BUS_WIDTH_SHIFT) - & ARMV8_PMU_BUS_WIDTH_MASK; - u32 val = 0; - - /* Encoded as Log2(number of bytes), plus one */ - if (bus_width > 2 && bus_width < 13) - val = 1 << (bus_width - 1); - - return sysfs_emit(page, "0x%08x\n", val); -} - -static DEVICE_ATTR_RO(bus_width); - -static struct attribute *armv8_pmuv3_caps_attrs[] = { - &dev_attr_slots.attr, - &dev_attr_bus_slots.attr, - &dev_attr_bus_width.attr, - NULL, -}; - -static const struct attribute_group armv8_pmuv3_caps_attr_group = { - .name = "caps", - .attrs = armv8_pmuv3_caps_attrs, -}; - -/* - * Perf Events' indices - */ -#define ARMV8_IDX_CYCLE_COUNTER 0 -#define ARMV8_IDX_COUNTER0 1 -#define ARMV8_IDX_CYCLE_COUNTER_USER 32 - -/* - * We unconditionally enable ARMv8.5-PMU long event counter support - * (64-bit events) where supported. Indicate if this arm_pmu has long - * event counter support. - */ -static bool armv8pmu_has_long_event(struct arm_pmu *cpu_pmu) -{ - return (cpu_pmu->pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P5); -} - -static inline bool armv8pmu_event_has_user_read(struct perf_event *event) -{ - return event->hw.flags & PERF_EVENT_FLAG_USER_READ_CNT; -} - -/* - * We must chain two programmable counters for 64 bit events, - * except when we have allocated the 64bit cycle counter (for CPU - * cycles event) or when user space counter access is enabled. - */ -static inline bool armv8pmu_event_is_chained(struct perf_event *event) -{ - int idx = event->hw.idx; - struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); - - return !armv8pmu_event_has_user_read(event) && - armv8pmu_event_is_64bit(event) && - !armv8pmu_has_long_event(cpu_pmu) && - (idx != ARMV8_IDX_CYCLE_COUNTER); -} - -/* - * ARMv8 low level PMU access - */ - -/* - * Perf Event to low level counters mapping - */ -#define ARMV8_IDX_TO_COUNTER(x) \ - (((x) - ARMV8_IDX_COUNTER0) & ARMV8_PMU_COUNTER_MASK) - -/* - * This code is really good - */ - -#define PMEVN_CASE(n, case_macro) \ - case n: case_macro(n); break - -#define PMEVN_SWITCH(x, case_macro) \ - do { \ - switch (x) { \ - PMEVN_CASE(0, case_macro); \ - PMEVN_CASE(1, case_macro); \ - PMEVN_CASE(2, case_macro); \ - PMEVN_CASE(3, case_macro); \ - PMEVN_CASE(4, case_macro); \ - PMEVN_CASE(5, case_macro); \ - PMEVN_CASE(6, case_macro); \ - PMEVN_CASE(7, case_macro); \ - PMEVN_CASE(8, case_macro); \ - PMEVN_CASE(9, case_macro); \ - PMEVN_CASE(10, case_macro); \ - PMEVN_CASE(11, case_macro); \ - PMEVN_CASE(12, case_macro); \ - PMEVN_CASE(13, case_macro); \ - PMEVN_CASE(14, case_macro); \ - PMEVN_CASE(15, case_macro); \ - PMEVN_CASE(16, case_macro); \ - PMEVN_CASE(17, case_macro); \ - PMEVN_CASE(18, case_macro); \ - PMEVN_CASE(19, case_macro); \ - PMEVN_CASE(20, case_macro); \ - PMEVN_CASE(21, case_macro); \ - PMEVN_CASE(22, case_macro); \ - PMEVN_CASE(23, case_macro); \ - PMEVN_CASE(24, case_macro); \ - PMEVN_CASE(25, case_macro); \ - PMEVN_CASE(26, case_macro); \ - PMEVN_CASE(27, case_macro); \ - PMEVN_CASE(28, case_macro); \ - PMEVN_CASE(29, case_macro); \ - PMEVN_CASE(30, case_macro); \ - default: WARN(1, "Invalid PMEV* index\n"); \ - } \ - } while (0) - -#define RETURN_READ_PMEVCNTRN(n) \ - return read_sysreg(pmevcntr##n##_el0) -static unsigned long read_pmevcntrn(int n) -{ - PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN); - return 0; -} - -#define WRITE_PMEVCNTRN(n) \ - write_sysreg(val, pmevcntr##n##_el0) -static void write_pmevcntrn(int n, unsigned long val) -{ - PMEVN_SWITCH(n, WRITE_PMEVCNTRN); -} - -#define WRITE_PMEVTYPERN(n) \ - write_sysreg(val, pmevtyper##n##_el0) -static void write_pmevtypern(int n, unsigned long val) -{ - PMEVN_SWITCH(n, WRITE_PMEVTYPERN); -} - -static inline u32 armv8pmu_pmcr_read(void) -{ - return read_sysreg(pmcr_el0); -} - -static inline void armv8pmu_pmcr_write(u32 val) -{ - val &= ARMV8_PMU_PMCR_MASK; - isb(); - write_sysreg(val, pmcr_el0); -} - -static inline int armv8pmu_has_overflowed(u32 pmovsr) -{ - return pmovsr & ARMV8_PMU_OVERFLOWED_MASK; -} - -static inline int armv8pmu_counter_has_overflowed(u32 pmnc, int idx) -{ - return pmnc & BIT(ARMV8_IDX_TO_COUNTER(idx)); -} - -static inline u64 armv8pmu_read_evcntr(int idx) -{ - u32 counter = ARMV8_IDX_TO_COUNTER(idx); - - return read_pmevcntrn(counter); -} - -static inline u64 armv8pmu_read_hw_counter(struct perf_event *event) -{ - int idx = event->hw.idx; - u64 val = armv8pmu_read_evcntr(idx); - - if (armv8pmu_event_is_chained(event)) - val = (val << 32) | armv8pmu_read_evcntr(idx - 1); - return val; -} - -/* - * The cycle counter is always a 64-bit counter. When ARMV8_PMU_PMCR_LP - * is set the event counters also become 64-bit counters. Unless the - * user has requested a long counter (attr.config1) then we want to - * interrupt upon 32-bit overflow - we achieve this by applying a bias. - */ -static bool armv8pmu_event_needs_bias(struct perf_event *event) -{ - struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - if (armv8pmu_event_is_64bit(event)) - return false; - - if (armv8pmu_has_long_event(cpu_pmu) || - idx == ARMV8_IDX_CYCLE_COUNTER) - return true; - - return false; -} - -static u64 armv8pmu_bias_long_counter(struct perf_event *event, u64 value) -{ - if (armv8pmu_event_needs_bias(event)) - value |= GENMASK(63, 32); - - return value; -} - -static u64 armv8pmu_unbias_long_counter(struct perf_event *event, u64 value) -{ - if (armv8pmu_event_needs_bias(event)) - value &= ~GENMASK(63, 32); - - return value; -} - -static u64 armv8pmu_read_counter(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - u64 value; - - if (idx == ARMV8_IDX_CYCLE_COUNTER) - value = read_sysreg(pmccntr_el0); - else - value = armv8pmu_read_hw_counter(event); - - return armv8pmu_unbias_long_counter(event, value); -} - -static inline void armv8pmu_write_evcntr(int idx, u64 value) -{ - u32 counter = ARMV8_IDX_TO_COUNTER(idx); - - write_pmevcntrn(counter, value); -} - -static inline void armv8pmu_write_hw_counter(struct perf_event *event, - u64 value) -{ - int idx = event->hw.idx; - - if (armv8pmu_event_is_chained(event)) { - armv8pmu_write_evcntr(idx, upper_32_bits(value)); - armv8pmu_write_evcntr(idx - 1, lower_32_bits(value)); - } else { - armv8pmu_write_evcntr(idx, value); - } -} - -static void armv8pmu_write_counter(struct perf_event *event, u64 value) -{ - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - value = armv8pmu_bias_long_counter(event, value); - - if (idx == ARMV8_IDX_CYCLE_COUNTER) - write_sysreg(value, pmccntr_el0); - else - armv8pmu_write_hw_counter(event, value); -} - -static inline void armv8pmu_write_evtype(int idx, u32 val) -{ - u32 counter = ARMV8_IDX_TO_COUNTER(idx); - - val &= ARMV8_PMU_EVTYPE_MASK; - write_pmevtypern(counter, val); -} - -static inline void armv8pmu_write_event_type(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - /* - * For chained events, the low counter is programmed to count - * the event of interest and the high counter is programmed - * with CHAIN event code with filters set to count at all ELs. - */ - if (armv8pmu_event_is_chained(event)) { - u32 chain_evt = ARMV8_PMUV3_PERFCTR_CHAIN | - ARMV8_PMU_INCLUDE_EL2; - - armv8pmu_write_evtype(idx - 1, hwc->config_base); - armv8pmu_write_evtype(idx, chain_evt); - } else { - if (idx == ARMV8_IDX_CYCLE_COUNTER) - write_sysreg(hwc->config_base, pmccfiltr_el0); - else - armv8pmu_write_evtype(idx, hwc->config_base); - } -} - -static u32 armv8pmu_event_cnten_mask(struct perf_event *event) -{ - int counter = ARMV8_IDX_TO_COUNTER(event->hw.idx); - u32 mask = BIT(counter); - - if (armv8pmu_event_is_chained(event)) - mask |= BIT(counter - 1); - return mask; -} - -static inline void armv8pmu_enable_counter(u32 mask) -{ - /* - * Make sure event configuration register writes are visible before we - * enable the counter. - * */ - isb(); - write_sysreg(mask, pmcntenset_el0); -} - -static inline void armv8pmu_enable_event_counter(struct perf_event *event) -{ - struct perf_event_attr *attr = &event->attr; - u32 mask = armv8pmu_event_cnten_mask(event); - - kvm_set_pmu_events(mask, attr); - - /* We rely on the hypervisor switch code to enable guest counters */ - if (!kvm_pmu_counter_deferred(attr)) - armv8pmu_enable_counter(mask); -} - -static inline void armv8pmu_disable_counter(u32 mask) -{ - write_sysreg(mask, pmcntenclr_el0); - /* - * Make sure the effects of disabling the counter are visible before we - * start configuring the event. - */ - isb(); -} - -static inline void armv8pmu_disable_event_counter(struct perf_event *event) -{ - struct perf_event_attr *attr = &event->attr; - u32 mask = armv8pmu_event_cnten_mask(event); - - kvm_clr_pmu_events(mask); - - /* We rely on the hypervisor switch code to disable guest counters */ - if (!kvm_pmu_counter_deferred(attr)) - armv8pmu_disable_counter(mask); -} - -static inline void armv8pmu_enable_intens(u32 mask) -{ - write_sysreg(mask, pmintenset_el1); -} - -static inline void armv8pmu_enable_event_irq(struct perf_event *event) -{ - u32 counter = ARMV8_IDX_TO_COUNTER(event->hw.idx); - armv8pmu_enable_intens(BIT(counter)); -} - -static inline void armv8pmu_disable_intens(u32 mask) -{ - write_sysreg(mask, pmintenclr_el1); - isb(); - /* Clear the overflow flag in case an interrupt is pending. */ - write_sysreg(mask, pmovsclr_el0); - isb(); -} - -static inline void armv8pmu_disable_event_irq(struct perf_event *event) -{ - u32 counter = ARMV8_IDX_TO_COUNTER(event->hw.idx); - armv8pmu_disable_intens(BIT(counter)); -} - -static inline u32 armv8pmu_getreset_flags(void) -{ - u32 value; - - /* Read */ - value = read_sysreg(pmovsclr_el0); - - /* Write to clear flags */ - value &= ARMV8_PMU_OVSR_MASK; - write_sysreg(value, pmovsclr_el0); - - return value; -} - -static void armv8pmu_disable_user_access(void) -{ - write_sysreg(0, pmuserenr_el0); -} - -static void armv8pmu_enable_user_access(struct arm_pmu *cpu_pmu) -{ - int i; - struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events); - - /* Clear any unused counters to avoid leaking their contents */ - for_each_clear_bit(i, cpuc->used_mask, cpu_pmu->num_events) { - if (i == ARMV8_IDX_CYCLE_COUNTER) - write_sysreg(0, pmccntr_el0); - else - armv8pmu_write_evcntr(i, 0); - } - - write_sysreg(0, pmuserenr_el0); - write_sysreg(ARMV8_PMU_USERENR_ER | ARMV8_PMU_USERENR_CR, pmuserenr_el0); -} - -static void armv8pmu_enable_event(struct perf_event *event) -{ - /* - * Enable counter and interrupt, and set the counter to count - * the event that we're interested in. - */ - - /* - * Disable counter - */ - armv8pmu_disable_event_counter(event); - - /* - * Set event. - */ - armv8pmu_write_event_type(event); - - /* - * Enable interrupt for this counter - */ - armv8pmu_enable_event_irq(event); - - /* - * Enable counter - */ - armv8pmu_enable_event_counter(event); -} - -static void armv8pmu_disable_event(struct perf_event *event) -{ - /* - * Disable counter - */ - armv8pmu_disable_event_counter(event); - - /* - * Disable interrupt for this counter - */ - armv8pmu_disable_event_irq(event); -} - -static void armv8pmu_start(struct arm_pmu *cpu_pmu) -{ - struct perf_event_context *ctx; - int nr_user = 0; - - ctx = perf_cpu_task_ctx(); - if (ctx) - nr_user = ctx->nr_user; - - if (sysctl_perf_user_access && nr_user) - armv8pmu_enable_user_access(cpu_pmu); - else - armv8pmu_disable_user_access(); - - /* Enable all counters */ - armv8pmu_pmcr_write(armv8pmu_pmcr_read() | ARMV8_PMU_PMCR_E); -} - -static void armv8pmu_stop(struct arm_pmu *cpu_pmu) -{ - /* Disable all counters */ - armv8pmu_pmcr_write(armv8pmu_pmcr_read() & ~ARMV8_PMU_PMCR_E); -} - -static irqreturn_t armv8pmu_handle_irq(struct arm_pmu *cpu_pmu) -{ - u32 pmovsr; - struct perf_sample_data data; - struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events); - struct pt_regs *regs; - int idx; - - /* - * Get and reset the IRQ flags - */ - pmovsr = armv8pmu_getreset_flags(); - - /* - * Did an overflow occur? - */ - if (!armv8pmu_has_overflowed(pmovsr)) - return IRQ_NONE; - - /* - * Handle the counter(s) overflow(s) - */ - regs = get_irq_regs(); - - /* - * Stop the PMU while processing the counter overflows - * to prevent skews in group events. - */ - armv8pmu_stop(cpu_pmu); - for (idx = 0; idx < cpu_pmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - /* Ignore if we don't have an event. */ - if (!event) - continue; - - /* - * We have a single interrupt for all counters. Check that - * each counter has overflowed before we process it. - */ - if (!armv8pmu_counter_has_overflowed(pmovsr, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event); - perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event)) - continue; - - /* - * Perf event overflow will queue the processing of the event as - * an irq_work which will be taken care of in the handling of - * IPI_IRQ_WORK. - */ - if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(event); - } - armv8pmu_start(cpu_pmu); - - return IRQ_HANDLED; -} - -static int armv8pmu_get_single_idx(struct pmu_hw_events *cpuc, - struct arm_pmu *cpu_pmu) -{ - int idx; - - for (idx = ARMV8_IDX_COUNTER0; idx < cpu_pmu->num_events; idx++) { - if (!test_and_set_bit(idx, cpuc->used_mask)) - return idx; - } - return -EAGAIN; -} - -static int armv8pmu_get_chain_idx(struct pmu_hw_events *cpuc, - struct arm_pmu *cpu_pmu) -{ - int idx; - - /* - * Chaining requires two consecutive event counters, where - * the lower idx must be even. - */ - for (idx = ARMV8_IDX_COUNTER0 + 1; idx < cpu_pmu->num_events; idx += 2) { - if (!test_and_set_bit(idx, cpuc->used_mask)) { - /* Check if the preceding even counter is available */ - if (!test_and_set_bit(idx - 1, cpuc->used_mask)) - return idx; - /* Release the Odd counter */ - clear_bit(idx, cpuc->used_mask); - } - } - return -EAGAIN; -} - -static int armv8pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); - struct hw_perf_event *hwc = &event->hw; - unsigned long evtype = hwc->config_base & ARMV8_PMU_EVTYPE_EVENT; - - /* Always prefer to place a cycle counter into the cycle counter. */ - if (evtype == ARMV8_PMUV3_PERFCTR_CPU_CYCLES) { - if (!test_and_set_bit(ARMV8_IDX_CYCLE_COUNTER, cpuc->used_mask)) - return ARMV8_IDX_CYCLE_COUNTER; - else if (armv8pmu_event_is_64bit(event) && - armv8pmu_event_want_user_access(event) && - !armv8pmu_has_long_event(cpu_pmu)) - return -EAGAIN; - } - - /* - * Otherwise use events counters - */ - if (armv8pmu_event_is_chained(event)) - return armv8pmu_get_chain_idx(cpuc, cpu_pmu); - else - return armv8pmu_get_single_idx(cpuc, cpu_pmu); -} - -static void armv8pmu_clear_event_idx(struct pmu_hw_events *cpuc, - struct perf_event *event) -{ - int idx = event->hw.idx; - - clear_bit(idx, cpuc->used_mask); - if (armv8pmu_event_is_chained(event)) - clear_bit(idx - 1, cpuc->used_mask); -} - -static int armv8pmu_user_event_idx(struct perf_event *event) -{ - if (!sysctl_perf_user_access || !armv8pmu_event_has_user_read(event)) - return 0; - - /* - * We remap the cycle counter index to 32 to - * match the offset applied to the rest of - * the counter indices. - */ - if (event->hw.idx == ARMV8_IDX_CYCLE_COUNTER) - return ARMV8_IDX_CYCLE_COUNTER_USER; - - return event->hw.idx; -} - -/* - * Add an event filter to a given event. - */ -static int armv8pmu_set_event_filter(struct hw_perf_event *event, - struct perf_event_attr *attr) -{ - unsigned long config_base = 0; - - if (attr->exclude_idle) - return -EPERM; - - /* - * If we're running in hyp mode, then we *are* the hypervisor. - * Therefore we ignore exclude_hv in this configuration, since - * there's no hypervisor to sample anyway. This is consistent - * with other architectures (x86 and Power). - */ - if (is_kernel_in_hyp_mode()) { - if (!attr->exclude_kernel && !attr->exclude_host) - config_base |= ARMV8_PMU_INCLUDE_EL2; - if (attr->exclude_guest) - config_base |= ARMV8_PMU_EXCLUDE_EL1; - if (attr->exclude_host) - config_base |= ARMV8_PMU_EXCLUDE_EL0; - } else { - if (!attr->exclude_hv && !attr->exclude_host) - config_base |= ARMV8_PMU_INCLUDE_EL2; - } - - /* - * Filter out !VHE kernels and guest kernels - */ - if (attr->exclude_kernel) - config_base |= ARMV8_PMU_EXCLUDE_EL1; - - if (attr->exclude_user) - config_base |= ARMV8_PMU_EXCLUDE_EL0; - - /* - * Install the filter into config_base as this is used to - * construct the event type. - */ - event->config_base = config_base; - - return 0; -} - -static void armv8pmu_reset(void *info) -{ - struct arm_pmu *cpu_pmu = (struct arm_pmu *)info; - u32 pmcr; - - /* The counter and interrupt enable registers are unknown at reset. */ - armv8pmu_disable_counter(U32_MAX); - armv8pmu_disable_intens(U32_MAX); - - /* Clear the counters we flip at guest entry/exit */ - kvm_clr_pmu_events(U32_MAX); - - /* - * Initialize & Reset PMNC. Request overflow interrupt for - * 64 bit cycle counter but cheat in armv8pmu_write_counter(). - */ - pmcr = ARMV8_PMU_PMCR_P | ARMV8_PMU_PMCR_C | ARMV8_PMU_PMCR_LC; - - /* Enable long event counter support where available */ - if (armv8pmu_has_long_event(cpu_pmu)) - pmcr |= ARMV8_PMU_PMCR_LP; - - armv8pmu_pmcr_write(pmcr); -} - -static int __armv8_pmuv3_map_event(struct perf_event *event, - const unsigned (*extra_event_map) - [PERF_COUNT_HW_MAX], - const unsigned (*extra_cache_map) - [PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX]) -{ - int hw_event_id; - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - - hw_event_id = armpmu_map_event(event, &armv8_pmuv3_perf_map, - &armv8_pmuv3_perf_cache_map, - ARMV8_PMU_EVTYPE_EVENT); - - /* - * CHAIN events only work when paired with an adjacent counter, and it - * never makes sense for a user to open one in isolation, as they'll be - * rotated arbitrarily. - */ - if (hw_event_id == ARMV8_PMUV3_PERFCTR_CHAIN) - return -EINVAL; - - if (armv8pmu_event_is_64bit(event)) - event->hw.flags |= ARMPMU_EVT_64BIT; - - /* - * User events must be allocated into a single counter, and so - * must not be chained. - * - * Most 64-bit events require long counter support, but 64-bit - * CPU_CYCLES events can be placed into the dedicated cycle - * counter when this is free. - */ - if (armv8pmu_event_want_user_access(event)) { - if (!(event->attach_state & PERF_ATTACH_TASK)) - return -EINVAL; - if (armv8pmu_event_is_64bit(event) && - (hw_event_id != ARMV8_PMUV3_PERFCTR_CPU_CYCLES) && - !armv8pmu_has_long_event(armpmu)) - return -EOPNOTSUPP; - - event->hw.flags |= PERF_EVENT_FLAG_USER_READ_CNT; - } - - /* Only expose micro/arch events supported by this PMU */ - if ((hw_event_id > 0) && (hw_event_id < ARMV8_PMUV3_MAX_COMMON_EVENTS) - && test_bit(hw_event_id, armpmu->pmceid_bitmap)) { - return hw_event_id; - } - - return armpmu_map_event(event, extra_event_map, extra_cache_map, - ARMV8_PMU_EVTYPE_EVENT); -} - -static int armv8_pmuv3_map_event(struct perf_event *event) -{ - return __armv8_pmuv3_map_event(event, NULL, NULL); -} - -static int armv8_a53_map_event(struct perf_event *event) -{ - return __armv8_pmuv3_map_event(event, NULL, &armv8_a53_perf_cache_map); -} - -static int armv8_a57_map_event(struct perf_event *event) -{ - return __armv8_pmuv3_map_event(event, NULL, &armv8_a57_perf_cache_map); -} - -static int armv8_a73_map_event(struct perf_event *event) -{ - return __armv8_pmuv3_map_event(event, NULL, &armv8_a73_perf_cache_map); -} - -static int armv8_thunder_map_event(struct perf_event *event) -{ - return __armv8_pmuv3_map_event(event, NULL, - &armv8_thunder_perf_cache_map); -} - -static int armv8_vulcan_map_event(struct perf_event *event) -{ - return __armv8_pmuv3_map_event(event, NULL, - &armv8_vulcan_perf_cache_map); -} - -struct armv8pmu_probe_info { - struct arm_pmu *pmu; - bool present; -}; - -static void __armv8pmu_probe_pmu(void *info) -{ - struct armv8pmu_probe_info *probe = info; - struct arm_pmu *cpu_pmu = probe->pmu; - u64 dfr0; - u64 pmceid_raw[2]; - u32 pmceid[2]; - int pmuver; - - dfr0 = read_sysreg(id_aa64dfr0_el1); - pmuver = cpuid_feature_extract_unsigned_field(dfr0, - ID_AA64DFR0_EL1_PMUVer_SHIFT); - if (pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF || - pmuver == ID_AA64DFR0_EL1_PMUVer_NI) - return; - - cpu_pmu->pmuver = pmuver; - probe->present = true; - - /* Read the nb of CNTx counters supported from PMNC */ - cpu_pmu->num_events = (armv8pmu_pmcr_read() >> ARMV8_PMU_PMCR_N_SHIFT) - & ARMV8_PMU_PMCR_N_MASK; - - /* Add the CPU cycles counter */ - cpu_pmu->num_events += 1; - - pmceid[0] = pmceid_raw[0] = read_sysreg(pmceid0_el0); - pmceid[1] = pmceid_raw[1] = read_sysreg(pmceid1_el0); - - bitmap_from_arr32(cpu_pmu->pmceid_bitmap, - pmceid, ARMV8_PMUV3_MAX_COMMON_EVENTS); - - pmceid[0] = pmceid_raw[0] >> 32; - pmceid[1] = pmceid_raw[1] >> 32; - - bitmap_from_arr32(cpu_pmu->pmceid_ext_bitmap, - pmceid, ARMV8_PMUV3_MAX_COMMON_EVENTS); - - /* store PMMIR_EL1 register for sysfs */ - if (pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P4 && (pmceid_raw[1] & BIT(31))) - cpu_pmu->reg_pmmir = read_cpuid(PMMIR_EL1); - else - cpu_pmu->reg_pmmir = 0; -} - -static int armv8pmu_probe_pmu(struct arm_pmu *cpu_pmu) -{ - struct armv8pmu_probe_info probe = { - .pmu = cpu_pmu, - .present = false, - }; - int ret; - - ret = smp_call_function_any(&cpu_pmu->supported_cpus, - __armv8pmu_probe_pmu, - &probe, 1); - if (ret) - return ret; - - return probe.present ? 0 : -ENODEV; -} - -static void armv8pmu_disable_user_access_ipi(void *unused) -{ - armv8pmu_disable_user_access(); -} - -static int armv8pmu_proc_user_access_handler(struct ctl_table *table, int write, - void *buffer, size_t *lenp, loff_t *ppos) -{ - int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos); - if (ret || !write || sysctl_perf_user_access) - return ret; - - on_each_cpu(armv8pmu_disable_user_access_ipi, NULL, 1); - return 0; -} - -static struct ctl_table armv8_pmu_sysctl_table[] = { - { - .procname = "perf_user_access", - .data = &sysctl_perf_user_access, - .maxlen = sizeof(unsigned int), - .mode = 0644, - .proc_handler = armv8pmu_proc_user_access_handler, - .extra1 = SYSCTL_ZERO, - .extra2 = SYSCTL_ONE, - }, - { } -}; - -static void armv8_pmu_register_sysctl_table(void) -{ - static u32 tbl_registered = 0; - - if (!cmpxchg_relaxed(&tbl_registered, 0, 1)) - register_sysctl("kernel", armv8_pmu_sysctl_table); -} - -static int armv8_pmu_init(struct arm_pmu *cpu_pmu, char *name, - int (*map_event)(struct perf_event *event), - const struct attribute_group *events, - const struct attribute_group *format, - const struct attribute_group *caps) -{ - int ret = armv8pmu_probe_pmu(cpu_pmu); - if (ret) - return ret; - - cpu_pmu->handle_irq = armv8pmu_handle_irq; - cpu_pmu->enable = armv8pmu_enable_event; - cpu_pmu->disable = armv8pmu_disable_event; - cpu_pmu->read_counter = armv8pmu_read_counter; - cpu_pmu->write_counter = armv8pmu_write_counter; - cpu_pmu->get_event_idx = armv8pmu_get_event_idx; - cpu_pmu->clear_event_idx = armv8pmu_clear_event_idx; - cpu_pmu->start = armv8pmu_start; - cpu_pmu->stop = armv8pmu_stop; - cpu_pmu->reset = armv8pmu_reset; - cpu_pmu->set_event_filter = armv8pmu_set_event_filter; - - cpu_pmu->pmu.event_idx = armv8pmu_user_event_idx; - - cpu_pmu->name = name; - cpu_pmu->map_event = map_event; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = events ? - events : &armv8_pmuv3_events_attr_group; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = format ? - format : &armv8_pmuv3_format_attr_group; - cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_CAPS] = caps ? - caps : &armv8_pmuv3_caps_attr_group; - - armv8_pmu_register_sysctl_table(); - return 0; -} - -static int armv8_pmu_init_nogroups(struct arm_pmu *cpu_pmu, char *name, - int (*map_event)(struct perf_event *event)) -{ - return armv8_pmu_init(cpu_pmu, name, map_event, NULL, NULL, NULL); -} - -#define PMUV3_INIT_SIMPLE(name) \ -static int name##_pmu_init(struct arm_pmu *cpu_pmu) \ -{ \ - return armv8_pmu_init_nogroups(cpu_pmu, #name, armv8_pmuv3_map_event);\ -} - -PMUV3_INIT_SIMPLE(armv8_pmuv3) - -PMUV3_INIT_SIMPLE(armv8_cortex_a34) -PMUV3_INIT_SIMPLE(armv8_cortex_a55) -PMUV3_INIT_SIMPLE(armv8_cortex_a65) -PMUV3_INIT_SIMPLE(armv8_cortex_a75) -PMUV3_INIT_SIMPLE(armv8_cortex_a76) -PMUV3_INIT_SIMPLE(armv8_cortex_a77) -PMUV3_INIT_SIMPLE(armv8_cortex_a78) -PMUV3_INIT_SIMPLE(armv9_cortex_a510) -PMUV3_INIT_SIMPLE(armv9_cortex_a710) -PMUV3_INIT_SIMPLE(armv8_cortex_x1) -PMUV3_INIT_SIMPLE(armv9_cortex_x2) -PMUV3_INIT_SIMPLE(armv8_neoverse_e1) -PMUV3_INIT_SIMPLE(armv8_neoverse_n1) -PMUV3_INIT_SIMPLE(armv9_neoverse_n2) -PMUV3_INIT_SIMPLE(armv8_neoverse_v1) - -PMUV3_INIT_SIMPLE(armv8_nvidia_carmel) -PMUV3_INIT_SIMPLE(armv8_nvidia_denver) - -static int armv8_a35_pmu_init(struct arm_pmu *cpu_pmu) -{ - return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a35", - armv8_a53_map_event); -} - -static int armv8_a53_pmu_init(struct arm_pmu *cpu_pmu) -{ - return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a53", - armv8_a53_map_event); -} - -static int armv8_a57_pmu_init(struct arm_pmu *cpu_pmu) -{ - return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a57", - armv8_a57_map_event); -} - -static int armv8_a72_pmu_init(struct arm_pmu *cpu_pmu) -{ - return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a72", - armv8_a57_map_event); -} - -static int armv8_a73_pmu_init(struct arm_pmu *cpu_pmu) -{ - return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a73", - armv8_a73_map_event); -} - -static int armv8_thunder_pmu_init(struct arm_pmu *cpu_pmu) -{ - return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cavium_thunder", - armv8_thunder_map_event); -} - -static int armv8_vulcan_pmu_init(struct arm_pmu *cpu_pmu) -{ - return armv8_pmu_init_nogroups(cpu_pmu, "armv8_brcm_vulcan", - armv8_vulcan_map_event); -} - -static const struct of_device_id armv8_pmu_of_device_ids[] = { - {.compatible = "arm,armv8-pmuv3", .data = armv8_pmuv3_pmu_init}, - {.compatible = "arm,cortex-a34-pmu", .data = armv8_cortex_a34_pmu_init}, - {.compatible = "arm,cortex-a35-pmu", .data = armv8_a35_pmu_init}, - {.compatible = "arm,cortex-a53-pmu", .data = armv8_a53_pmu_init}, - {.compatible = "arm,cortex-a55-pmu", .data = armv8_cortex_a55_pmu_init}, - {.compatible = "arm,cortex-a57-pmu", .data = armv8_a57_pmu_init}, - {.compatible = "arm,cortex-a65-pmu", .data = armv8_cortex_a65_pmu_init}, - {.compatible = "arm,cortex-a72-pmu", .data = armv8_a72_pmu_init}, - {.compatible = "arm,cortex-a73-pmu", .data = armv8_a73_pmu_init}, - {.compatible = "arm,cortex-a75-pmu", .data = armv8_cortex_a75_pmu_init}, - {.compatible = "arm,cortex-a76-pmu", .data = armv8_cortex_a76_pmu_init}, - {.compatible = "arm,cortex-a77-pmu", .data = armv8_cortex_a77_pmu_init}, - {.compatible = "arm,cortex-a78-pmu", .data = armv8_cortex_a78_pmu_init}, - {.compatible = "arm,cortex-a510-pmu", .data = armv9_cortex_a510_pmu_init}, - {.compatible = "arm,cortex-a710-pmu", .data = armv9_cortex_a710_pmu_init}, - {.compatible = "arm,cortex-x1-pmu", .data = armv8_cortex_x1_pmu_init}, - {.compatible = "arm,cortex-x2-pmu", .data = armv9_cortex_x2_pmu_init}, - {.compatible = "arm,neoverse-e1-pmu", .data = armv8_neoverse_e1_pmu_init}, - {.compatible = "arm,neoverse-n1-pmu", .data = armv8_neoverse_n1_pmu_init}, - {.compatible = "arm,neoverse-n2-pmu", .data = armv9_neoverse_n2_pmu_init}, - {.compatible = "arm,neoverse-v1-pmu", .data = armv8_neoverse_v1_pmu_init}, - {.compatible = "cavium,thunder-pmu", .data = armv8_thunder_pmu_init}, - {.compatible = "brcm,vulcan-pmu", .data = armv8_vulcan_pmu_init}, - {.compatible = "nvidia,carmel-pmu", .data = armv8_nvidia_carmel_pmu_init}, - {.compatible = "nvidia,denver-pmu", .data = armv8_nvidia_denver_pmu_init}, - {}, -}; - -static int armv8_pmu_device_probe(struct platform_device *pdev) -{ - return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids, NULL); -} - -static struct platform_driver armv8_pmu_driver = { - .driver = { - .name = ARMV8_PMU_PDEV_NAME, - .of_match_table = armv8_pmu_of_device_ids, - .suppress_bind_attrs = true, - }, - .probe = armv8_pmu_device_probe, -}; - -static int __init armv8_pmu_driver_init(void) -{ - if (acpi_disabled) - return platform_driver_register(&armv8_pmu_driver); - else - return arm_pmu_acpi_probe(armv8_pmuv3_pmu_init); -} -device_initcall(armv8_pmu_driver_init) - -void arch_perf_update_userpage(struct perf_event *event, - struct perf_event_mmap_page *userpg, u64 now) -{ - struct clock_read_data *rd; - unsigned int seq; - u64 ns; - - userpg->cap_user_time = 0; - userpg->cap_user_time_zero = 0; - userpg->cap_user_time_short = 0; - userpg->cap_user_rdpmc = armv8pmu_event_has_user_read(event); - - if (userpg->cap_user_rdpmc) { - if (event->hw.flags & ARMPMU_EVT_64BIT) - userpg->pmc_width = 64; - else - userpg->pmc_width = 32; - } - - do { - rd = sched_clock_read_begin(&seq); - - if (rd->read_sched_clock != arch_timer_read_counter) - return; - - userpg->time_mult = rd->mult; - userpg->time_shift = rd->shift; - userpg->time_zero = rd->epoch_ns; - userpg->time_cycles = rd->epoch_cyc; - userpg->time_mask = rd->sched_clock_mask; - - /* - * Subtract the cycle base, such that software that - * doesn't know about cap_user_time_short still 'works' - * assuming no wraps. - */ - ns = mul_u64_u32_shr(rd->epoch_cyc, rd->mult, rd->shift); - userpg->time_zero -= ns; - - } while (sched_clock_read_retry(seq)); - - userpg->time_offset = userpg->time_zero - now; - - /* - * time_shift is not expected to be greater than 31 due to - * the original published conversion algorithm shifting a - * 32-bit value (now specifies a 64-bit value) - refer - * perf_event_mmap_page documentation in perf_event.h. - */ - if (userpg->time_shift == 32) { - userpg->time_shift = 31; - userpg->time_mult >>= 1; - } - - /* - * Internal timekeeping for enabled/running/stopped times - * is always computed with the sched_clock. - */ - userpg->cap_user_time = 1; - userpg->cap_user_time_zero = 1; - userpg->cap_user_time_short = 1; -} diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 71d59b5abede..b5bed62483cb 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -217,7 +217,7 @@ void __show_regs(struct pt_regs *regs) if (!user_mode(regs)) { printk("pc : %pS\n", (void *)regs->pc); - printk("lr : %pS\n", (void *)ptrauth_strip_insn_pac(lr)); + printk("lr : %pS\n", (void *)ptrauth_strip_kernel_insn_pac(lr)); } else { printk("pc : %016llx\n", regs->pc); printk("lr : %016llx\n", lr); diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c index fca9cc6f5581..05f40c4e18fd 100644 --- a/arch/arm64/kernel/proton-pack.c +++ b/arch/arm64/kernel/proton-pack.c @@ -966,9 +966,6 @@ static void this_cpu_set_vectors(enum arm64_bp_harden_el1_vectors slot) { const char *v = arm64_get_bp_hardening_vector(slot); - if (slot < 0) - return; - __this_cpu_write(this_cpu_vector, v); /* diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 06a02707f488..2cfc810d0a5b 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -651,7 +651,7 @@ static int parse_user_sigframe(struct user_ctxs *user, break; case TPIDR2_MAGIC: - if (!system_supports_sme()) + if (!system_supports_tpidr2()) goto invalid; if (user->tpidr2) @@ -802,7 +802,7 @@ static int restore_sigframe(struct pt_regs *regs, err = restore_fpsimd_context(&user); } - if (err == 0 && system_supports_sme() && user.tpidr2) + if (err == 0 && system_supports_tpidr2() && user.tpidr2) err = restore_tpidr2_context(&user); if (err == 0 && system_supports_sme() && user.za) @@ -893,6 +893,13 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user, return err; } + if (system_supports_tpidr2()) { + err = sigframe_alloc(user, &user->tpidr2_offset, + sizeof(struct tpidr2_context)); + if (err) + return err; + } + if (system_supports_sme()) { unsigned int vl; unsigned int vq = 0; @@ -902,11 +909,6 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user, else vl = task_get_sme_vl(current); - err = sigframe_alloc(user, &user->tpidr2_offset, - sizeof(struct tpidr2_context)); - if (err) - return err; - if (thread_za_enabled(¤t->thread)) vq = sve_vq_from_vl(vl); @@ -974,7 +976,7 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user, } /* TPIDR2 if supported */ - if (system_supports_sme() && err == 0) { + if (system_supports_tpidr2() && err == 0) { struct tpidr2_context __user *tpidr2_ctx = apply_user_offset(user, user->tpidr2_offset); err |= preserve_tpidr2_context(tpidr2_ctx); diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index 83154303e682..17f66a74c745 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -25,8 +25,9 @@ * * The regs must be on a stack currently owned by the calling task. */ -static __always_inline void unwind_init_from_regs(struct unwind_state *state, - struct pt_regs *regs) +static __always_inline void +unwind_init_from_regs(struct unwind_state *state, + struct pt_regs *regs) { unwind_init_common(state, current); @@ -42,7 +43,8 @@ static __always_inline void unwind_init_from_regs(struct unwind_state *state, * * The function which invokes this must be noinline. */ -static __always_inline void unwind_init_from_caller(struct unwind_state *state) +static __always_inline void +unwind_init_from_caller(struct unwind_state *state) { unwind_init_common(state, current); @@ -60,8 +62,9 @@ static __always_inline void unwind_init_from_caller(struct unwind_state *state) * duration of the unwind, or the unwind will be bogus. It is never valid to * call this for the current task. */ -static __always_inline void unwind_init_from_task(struct unwind_state *state, - struct task_struct *task) +static __always_inline void +unwind_init_from_task(struct unwind_state *state, + struct task_struct *task) { unwind_init_common(state, task); @@ -69,6 +72,32 @@ static __always_inline void unwind_init_from_task(struct unwind_state *state, state->pc = thread_saved_pc(task); } +static __always_inline int +unwind_recover_return_address(struct unwind_state *state) +{ +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + if (state->task->ret_stack && + (state->pc == (unsigned long)return_to_handler)) { + unsigned long orig_pc; + orig_pc = ftrace_graph_ret_addr(state->task, NULL, state->pc, + (void *)state->fp); + if (WARN_ON_ONCE(state->pc == orig_pc)) + return -EINVAL; + state->pc = orig_pc; + } +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + +#ifdef CONFIG_KRETPROBES + if (is_kretprobe_trampoline(state->pc)) { + state->pc = kretprobe_find_ret_addr(state->task, + (void *)state->fp, + &state->kr_cur); + } +#endif /* CONFIG_KRETPROBES */ + + return 0; +} + /* * Unwind from one frame record (A) to the next frame record (B). * @@ -76,7 +105,8 @@ static __always_inline void unwind_init_from_task(struct unwind_state *state, * records (e.g. a cycle), determined based on the location and fp value of A * and the location (but not the fp value) of B. */ -static int notrace unwind_next(struct unwind_state *state) +static __always_inline int +unwind_next(struct unwind_state *state) { struct task_struct *tsk = state->task; unsigned long fp = state->fp; @@ -90,37 +120,18 @@ static int notrace unwind_next(struct unwind_state *state) if (err) return err; - state->pc = ptrauth_strip_insn_pac(state->pc); - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - if (tsk->ret_stack && - (state->pc == (unsigned long)return_to_handler)) { - unsigned long orig_pc; - /* - * This is a case where function graph tracer has - * modified a return address (LR) in a stack frame - * to hook a function return. - * So replace it to an original value. - */ - orig_pc = ftrace_graph_ret_addr(tsk, NULL, state->pc, - (void *)state->fp); - if (WARN_ON_ONCE(state->pc == orig_pc)) - return -EINVAL; - state->pc = orig_pc; - } -#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ -#ifdef CONFIG_KRETPROBES - if (is_kretprobe_trampoline(state->pc)) - state->pc = kretprobe_find_ret_addr(tsk, (void *)state->fp, &state->kr_cur); -#endif + state->pc = ptrauth_strip_kernel_insn_pac(state->pc); - return 0; + return unwind_recover_return_address(state); } -NOKPROBE_SYMBOL(unwind_next); -static void notrace unwind(struct unwind_state *state, - stack_trace_consume_fn consume_entry, void *cookie) +static __always_inline void +unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry, + void *cookie) { + if (unwind_recover_return_address(state)) + return; + while (1) { int ret; @@ -131,40 +142,6 @@ static void notrace unwind(struct unwind_state *state, break; } } -NOKPROBE_SYMBOL(unwind); - -static bool dump_backtrace_entry(void *arg, unsigned long where) -{ - char *loglvl = arg; - printk("%s %pSb\n", loglvl, (void *)where); - return true; -} - -void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk, - const char *loglvl) -{ - pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk); - - if (regs && user_mode(regs)) - return; - - if (!tsk) - tsk = current; - - if (!try_get_task_stack(tsk)) - return; - - printk("%sCall trace:\n", loglvl); - arch_stack_walk(dump_backtrace_entry, (void *)loglvl, tsk, regs); - - put_task_stack(tsk); -} - -void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl) -{ - dump_backtrace(NULL, tsk, loglvl); - barrier(); -} /* * Per-cpu stacks are only accessible when unwinding the current task in a @@ -230,3 +207,36 @@ noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry, unwind(&state, consume_entry, cookie); } + +static bool dump_backtrace_entry(void *arg, unsigned long where) +{ + char *loglvl = arg; + printk("%s %pSb\n", loglvl, (void *)where); + return true; +} + +void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk, + const char *loglvl) +{ + pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk); + + if (regs && user_mode(regs)) + return; + + if (!tsk) + tsk = current; + + if (!try_get_task_stack(tsk)) + return; + + printk("%sCall trace:\n", loglvl); + arch_stack_walk(dump_backtrace_entry, (void *)loglvl, tsk, regs); + + put_task_stack(tsk); +} + +void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl) +{ + dump_backtrace(NULL, tsk, loglvl); + barrier(); +} diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index beaf9586338f..fe7a53c6781f 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -6,9 +6,7 @@ # Heavily based on the vDSO Makefiles for other archs. # -# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before -# the inclusion of generic Makefile. -ARCH_REL_TYPE_ABS := R_AARCH64_JUMP_SLOT|R_AARCH64_GLOB_DAT|R_AARCH64_ABS64 +# Include the generic Makefile to check the built vdso. include $(srctree)/lib/vdso/Makefile obj-vdso := vgettimeofday.o note.o sigreturn.o diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile index f59bd1a4ead6..d014162c5c71 100644 --- a/arch/arm64/kernel/vdso32/Makefile +++ b/arch/arm64/kernel/vdso32/Makefile @@ -3,9 +3,6 @@ # Makefile for vdso32 # -# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before -# the inclusion of generic Makefile. -ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32 include $(srctree)/lib/vdso/Makefile # Same as cc-*option, but using CC_COMPAT instead of CC diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig index ca6eadeb7d1a..f531da6b362e 100644 --- a/arch/arm64/kvm/Kconfig +++ b/arch/arm64/kvm/Kconfig @@ -29,7 +29,6 @@ menuconfig KVM select KVM_MMIO select KVM_GENERIC_DIRTYLOG_READ_PROTECT select KVM_XFER_TO_GUEST_WORK - select SRCU select KVM_VFIO select HAVE_KVM_EVENTFD select HAVE_KVM_IRQFD diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c index 00610477ec7b..e1af4301b913 100644 --- a/arch/arm64/kvm/arch_timer.c +++ b/arch/arm64/kvm/arch_timer.c @@ -84,14 +84,10 @@ u64 timer_get_cval(struct arch_timer_context *ctxt) static u64 timer_get_offset(struct arch_timer_context *ctxt) { - struct kvm_vcpu *vcpu = ctxt->vcpu; + if (ctxt->offset.vm_offset) + return *ctxt->offset.vm_offset; - switch(arch_timer_ctx_index(ctxt)) { - case TIMER_VTIMER: - return __vcpu_sys_reg(vcpu, CNTVOFF_EL2); - default: - return 0; - } + return 0; } static void timer_set_ctl(struct arch_timer_context *ctxt, u32 ctl) @@ -128,15 +124,12 @@ static void timer_set_cval(struct arch_timer_context *ctxt, u64 cval) static void timer_set_offset(struct arch_timer_context *ctxt, u64 offset) { - struct kvm_vcpu *vcpu = ctxt->vcpu; - - switch(arch_timer_ctx_index(ctxt)) { - case TIMER_VTIMER: - __vcpu_sys_reg(vcpu, CNTVOFF_EL2) = offset; - break; - default: + if (!ctxt->offset.vm_offset) { WARN(offset, "timer %ld\n", arch_timer_ctx_index(ctxt)); + return; } + + WRITE_ONCE(*ctxt->offset.vm_offset, offset); } u64 kvm_phys_timer_read(void) @@ -765,25 +758,6 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu) return 0; } -/* Make the updates of cntvoff for all vtimer contexts atomic */ -static void update_vtimer_cntvoff(struct kvm_vcpu *vcpu, u64 cntvoff) -{ - unsigned long i; - struct kvm *kvm = vcpu->kvm; - struct kvm_vcpu *tmp; - - mutex_lock(&kvm->lock); - kvm_for_each_vcpu(i, tmp, kvm) - timer_set_offset(vcpu_vtimer(tmp), cntvoff); - - /* - * When called from the vcpu create path, the CPU being created is not - * included in the loop above, so we just set it here as well. - */ - timer_set_offset(vcpu_vtimer(vcpu), cntvoff); - mutex_unlock(&kvm->lock); -} - void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu) { struct arch_timer_cpu *timer = vcpu_timer(vcpu); @@ -791,10 +765,11 @@ void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu) struct arch_timer_context *ptimer = vcpu_ptimer(vcpu); vtimer->vcpu = vcpu; + vtimer->offset.vm_offset = &vcpu->kvm->arch.timer_data.voffset; ptimer->vcpu = vcpu; /* Synchronize cntvoff across all vtimers of a VM. */ - update_vtimer_cntvoff(vcpu, kvm_phys_timer_read()); + timer_set_offset(vtimer, kvm_phys_timer_read()); timer_set_offset(ptimer, 0); hrtimer_init(&timer->bg_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS_HARD); @@ -840,7 +815,7 @@ int kvm_arm_timer_set_reg(struct kvm_vcpu *vcpu, u64 regid, u64 value) break; case KVM_REG_ARM_TIMER_CNT: timer = vcpu_vtimer(vcpu); - update_vtimer_cntvoff(vcpu, kvm_phys_timer_read() - value); + timer_set_offset(timer, kvm_phys_timer_read() - value); break; case KVM_REG_ARM_TIMER_CVAL: timer = vcpu_vtimer(vcpu); diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 3bd732eaf087..6673c7b4f1a8 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -16,7 +16,6 @@ #include <linux/fs.h> #include <linux/mman.h> #include <linux/sched.h> -#include <linux/kmemleak.h> #include <linux/kvm.h> #include <linux/kvm_irqfd.h> #include <linux/irqbypass.h> @@ -46,7 +45,6 @@ #include <kvm/arm_psci.h> static enum kvm_mode kvm_mode = KVM_MODE_DEFAULT; -DEFINE_STATIC_KEY_FALSE(kvm_protected_mode_initialized); DECLARE_KVM_HYP_PER_CPU(unsigned long, kvm_hyp_vector); @@ -220,6 +218,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_VCPU_ATTRIBUTES: case KVM_CAP_PTP_KVM: case KVM_CAP_ARM_SYSTEM_SUSPEND: + case KVM_CAP_IRQFD_RESAMPLE: r = 1; break; case KVM_CAP_SET_GUEST_DEBUG2: @@ -1889,9 +1888,33 @@ static int __init do_pkvm_init(u32 hyp_va_bits) return ret; } +static u64 get_hyp_id_aa64pfr0_el1(void) +{ + /* + * Track whether the system isn't affected by spectre/meltdown in the + * hypervisor's view of id_aa64pfr0_el1, used for protected VMs. + * Although this is per-CPU, we make it global for simplicity, e.g., not + * to have to worry about vcpu migration. + * + * Unlike for non-protected VMs, userspace cannot override this for + * protected VMs. + */ + u64 val = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1); + + val &= ~(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) | + ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3)); + + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2), + arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED); + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3), + arm64_get_meltdown_state() == SPECTRE_UNAFFECTED); + + return val; +} + static void kvm_hyp_init_symbols(void) { - kvm_nvhe_sym(id_aa64pfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1); + kvm_nvhe_sym(id_aa64pfr0_el1_sys_val) = get_hyp_id_aa64pfr0_el1(); kvm_nvhe_sym(id_aa64pfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1); kvm_nvhe_sym(id_aa64isar0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR0_EL1); kvm_nvhe_sym(id_aa64isar1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR1_EL1); @@ -2105,41 +2128,6 @@ out_err: return err; } -static void __init _kvm_host_prot_finalize(void *arg) -{ - int *err = arg; - - if (WARN_ON(kvm_call_hyp_nvhe(__pkvm_prot_finalize))) - WRITE_ONCE(*err, -EINVAL); -} - -static int __init pkvm_drop_host_privileges(void) -{ - int ret = 0; - - /* - * Flip the static key upfront as that may no longer be possible - * once the host stage 2 is installed. - */ - static_branch_enable(&kvm_protected_mode_initialized); - on_each_cpu(_kvm_host_prot_finalize, &ret, 1); - return ret; -} - -static int __init finalize_hyp_mode(void) -{ - if (!is_protected_kvm_enabled()) - return 0; - - /* - * Exclude HYP sections from kmemleak so that they don't get peeked - * at, which would end badly once inaccessible. - */ - kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start); - kmemleak_free_part_phys(hyp_mem_base, hyp_mem_size); - return pkvm_drop_host_privileges(); -} - struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr) { struct kvm_vcpu *vcpu; @@ -2257,14 +2245,6 @@ static __init int kvm_arm_init(void) if (err) goto out_hyp; - if (!in_hyp_mode) { - err = finalize_hyp_mode(); - if (err) { - kvm_err("Failed to finalize Hyp protection\n"); - goto out_subs; - } - } - if (is_protected_kvm_enabled()) { kvm_info("Protected nVHE mode initialized successfully\n"); } else if (in_hyp_mode) { diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h index 07edfc7524c9..37440e1dda93 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h +++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h @@ -33,11 +33,14 @@ * Allow for protected VMs: * - Floating-point and Advanced SIMD * - Data Independent Timing + * - Spectre/Meltdown Mitigation */ #define PVM_ID_AA64PFR0_ALLOW (\ ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_FP) | \ ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AdvSIMD) | \ - ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_DIT) \ + ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_DIT) | \ + ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) | \ + ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3) \ ) /* diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c index 08d2b004f4b7..edd969a1f36b 100644 --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -85,19 +85,12 @@ static u64 get_restricted_features_unsigned(u64 sys_reg_val, static u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu) { - const struct kvm *kvm = (const struct kvm *)kern_hyp_va(vcpu->kvm); u64 set_mask = 0; u64 allow_mask = PVM_ID_AA64PFR0_ALLOW; set_mask |= get_restricted_features_unsigned(id_aa64pfr0_el1_sys_val, PVM_ID_AA64PFR0_RESTRICT_UNSIGNED); - /* Spectre and Meltdown mitigation in KVM */ - set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2), - (u64)kvm->arch.pfr0_csv2); - set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3), - (u64)kvm->arch.pfr0_csv3); - return (id_aa64pfr0_el1_sys_val & allow_mask) | set_mask; } diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c index 64c086c02c60..c4b4678bc4a4 100644 --- a/arch/arm64/kvm/hypercalls.c +++ b/arch/arm64/kvm/hypercalls.c @@ -44,7 +44,7 @@ static void kvm_ptp_get_time(struct kvm_vcpu *vcpu, u64 *val) feature = smccc_get_arg1(vcpu); switch (feature) { case KVM_PTP_VIRT_COUNTER: - cycles = systime_snapshot.cycles - vcpu_read_sys_reg(vcpu, CNTVOFF_EL2); + cycles = systime_snapshot.cycles - vcpu->kvm->arch.timer_data.voffset; break; case KVM_PTP_PHYS_COUNTER: cycles = systime_snapshot.cycles; @@ -397,6 +397,8 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) u64 val; int wa_level; + if (KVM_REG_SIZE(reg->id) != sizeof(val)) + return -ENOENT; if (copy_from_user(&val, uaddr, KVM_REG_SIZE(reg->id))) return -EFAULT; diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 7113587222ff..3b9d4d24c361 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -666,14 +666,33 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr) CONFIG_PGTABLE_LEVELS), .mm_ops = &kvm_user_mm_ops, }; + unsigned long flags; kvm_pte_t pte = 0; /* Keep GCC quiet... */ u32 level = ~0; int ret; + /* + * Disable IRQs so that we hazard against a concurrent + * teardown of the userspace page tables (which relies on + * IPI-ing threads). + */ + local_irq_save(flags); ret = kvm_pgtable_get_leaf(&pgt, addr, &pte, &level); - VM_BUG_ON(ret); - VM_BUG_ON(level >= KVM_PGTABLE_MAX_LEVELS); - VM_BUG_ON(!(pte & PTE_VALID)); + local_irq_restore(flags); + + if (ret) + return ret; + + /* + * Not seeing an error, but not updating level? Something went + * deeply wrong... + */ + if (WARN_ON(level >= KVM_PGTABLE_MAX_LEVELS)) + return -EFAULT; + + /* Oops, the userspace PTs are gone... Replay the fault */ + if (!kvm_pte_valid(pte)) + return -EAGAIN; return BIT(ARM64_HW_PGTABLE_LEVEL_SHIFT(level)); } @@ -1079,7 +1098,7 @@ static bool fault_supports_stage2_huge_mapping(struct kvm_memory_slot *memslot, * * Returns the size of the mapping. */ -static unsigned long +static long transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot, unsigned long hva, kvm_pfn_t *pfnp, phys_addr_t *ipap) @@ -1091,8 +1110,15 @@ transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot, * sure that the HVA and IPA are sufficiently aligned and that the * block map is contained within the memslot. */ - if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE) && - get_user_mapping_size(kvm, hva) >= PMD_SIZE) { + if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE)) { + int sz = get_user_mapping_size(kvm, hva); + + if (sz < 0) + return sz; + + if (sz < PMD_SIZE) + return PAGE_SIZE; + /* * The address we faulted on is backed by a transparent huge * page. However, because we map the compound huge page and @@ -1192,7 +1218,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, { int ret = 0; bool write_fault, writable, force_pte = false; - bool exec_fault; + bool exec_fault, mte_allowed; bool device = false; unsigned long mmu_seq; struct kvm *kvm = vcpu->kvm; @@ -1203,7 +1229,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, kvm_pfn_t pfn; bool logging_active = memslot_is_logging(memslot); unsigned long fault_level = kvm_vcpu_trap_get_fault_level(vcpu); - unsigned long vma_pagesize, fault_granule; + long vma_pagesize, fault_granule; enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R; struct kvm_pgtable *pgt; @@ -1218,6 +1244,20 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, } /* + * Permission faults just need to update the existing leaf entry, + * and so normally don't require allocations from the memcache. The + * only exception to this is when dirty logging is enabled at runtime + * and a write fault needs to collapse a block entry into a table. + */ + if (fault_status != ESR_ELx_FSC_PERM || + (logging_active && write_fault)) { + ret = kvm_mmu_topup_memory_cache(memcache, + kvm_mmu_cache_min_pages(kvm)); + if (ret) + return ret; + } + + /* * Let's check if we will get back a huge page backed by hugetlbfs, or * get block mapping for device MMIO region. */ @@ -1269,37 +1309,21 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, fault_ipa &= ~(vma_pagesize - 1); gfn = fault_ipa >> PAGE_SHIFT; - mmap_read_unlock(current->mm); + mte_allowed = kvm_vma_mte_allowed(vma); - /* - * Permission faults just need to update the existing leaf entry, - * and so normally don't require allocations from the memcache. The - * only exception to this is when dirty logging is enabled at runtime - * and a write fault needs to collapse a block entry into a table. - */ - if (fault_status != ESR_ELx_FSC_PERM || - (logging_active && write_fault)) { - ret = kvm_mmu_topup_memory_cache(memcache, - kvm_mmu_cache_min_pages(kvm)); - if (ret) - return ret; - } + /* Don't use the VMA after the unlock -- it may have vanished */ + vma = NULL; - mmu_seq = vcpu->kvm->mmu_invalidate_seq; /* - * Ensure the read of mmu_invalidate_seq happens before we call - * gfn_to_pfn_prot (which calls get_user_pages), so that we don't risk - * the page we just got a reference to gets unmapped before we have a - * chance to grab the mmu_lock, which ensure that if the page gets - * unmapped afterwards, the call to kvm_unmap_gfn will take it away - * from us again properly. This smp_rmb() interacts with the smp_wmb() - * in kvm_mmu_notifier_invalidate_<page|range_end>. + * Read mmu_invalidate_seq so that KVM can detect if the results of + * vma_lookup() or __gfn_to_pfn_memslot() become stale prior to + * acquiring kvm->mmu_lock. * - * Besides, __gfn_to_pfn_memslot() instead of gfn_to_pfn_prot() is - * used to avoid unnecessary overhead introduced to locate the memory - * slot because it's always fixed even @gfn is adjusted for huge pages. + * Rely on mmap_read_unlock() for an implicit smp_rmb(), which pairs + * with the smp_wmb() in kvm_mmu_invalidate_end(). */ - smp_rmb(); + mmu_seq = vcpu->kvm->mmu_invalidate_seq; + mmap_read_unlock(current->mm); pfn = __gfn_to_pfn_memslot(memslot, gfn, false, false, NULL, write_fault, &writable, NULL); @@ -1350,11 +1374,16 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, vma_pagesize = transparent_hugepage_adjust(kvm, memslot, hva, &pfn, &fault_ipa); + + if (vma_pagesize < 0) { + ret = vma_pagesize; + goto out_unlock; + } } if (fault_status != ESR_ELx_FSC_PERM && !device && kvm_has_mte(kvm)) { /* Check the VMM hasn't introduced a new disallowed VMA */ - if (kvm_vma_mte_allowed(vma)) { + if (mte_allowed) { sanitise_mte_tags(kvm, pfn, vma_pagesize); } else { ret = -EFAULT; diff --git a/arch/arm64/kvm/pkvm.c b/arch/arm64/kvm/pkvm.c index cf56958b1492..6e9ece1ebbe7 100644 --- a/arch/arm64/kvm/pkvm.c +++ b/arch/arm64/kvm/pkvm.c @@ -4,6 +4,8 @@ * Author: Quentin Perret <qperret@google.com> */ +#include <linux/init.h> +#include <linux/kmemleak.h> #include <linux/kvm_host.h> #include <linux/memblock.h> #include <linux/mutex.h> @@ -13,6 +15,8 @@ #include "hyp_constants.h" +DEFINE_STATIC_KEY_FALSE(kvm_protected_mode_initialized); + static struct memblock_region *hyp_memory = kvm_nvhe_sym(hyp_memory); static unsigned int *hyp_memblock_nr_ptr = &kvm_nvhe_sym(hyp_memblock_nr); @@ -213,3 +217,46 @@ int pkvm_init_host_vm(struct kvm *host_kvm) mutex_init(&host_kvm->lock); return 0; } + +static void __init _kvm_host_prot_finalize(void *arg) +{ + int *err = arg; + + if (WARN_ON(kvm_call_hyp_nvhe(__pkvm_prot_finalize))) + WRITE_ONCE(*err, -EINVAL); +} + +static int __init pkvm_drop_host_privileges(void) +{ + int ret = 0; + + /* + * Flip the static key upfront as that may no longer be possible + * once the host stage 2 is installed. + */ + static_branch_enable(&kvm_protected_mode_initialized); + on_each_cpu(_kvm_host_prot_finalize, &ret, 1); + return ret; +} + +static int __init finalize_pkvm(void) +{ + int ret; + + if (!is_protected_kvm_enabled()) + return 0; + + /* + * Exclude HYP sections from kmemleak so that they don't get peeked + * at, which would end badly once inaccessible. + */ + kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start); + kmemleak_free_part_phys(hyp_mem_base, hyp_mem_size); + + ret = pkvm_drop_host_privileges(); + if (ret) + pr_err("Failed to finalize Hyp protection: %d\n", ret); + + return ret; +} +device_initcall_sync(finalize_pkvm); diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c index 24908400e190..5eca0cdd961d 100644 --- a/arch/arm64/kvm/pmu-emul.c +++ b/arch/arm64/kvm/pmu-emul.c @@ -538,7 +538,8 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val) if (!kvm_pmu_is_3p5(vcpu)) val &= ~ARMV8_PMU_PMCR_LP; - __vcpu_sys_reg(vcpu, PMCR_EL0) = val; + /* The reset bits don't indicate any state, and shouldn't be saved. */ + __vcpu_sys_reg(vcpu, PMCR_EL0) = val & ~(ARMV8_PMU_PMCR_C | ARMV8_PMU_PMCR_P); if (val & ARMV8_PMU_PMCR_E) { kvm_pmu_enable_counter_mask(vcpu, @@ -557,6 +558,7 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val) for_each_set_bit(i, &mask, 32) kvm_pmu_set_pmc_value(kvm_vcpu_idx_to_pmc(vcpu, i), 0, true); } + kvm_vcpu_pmu_restore_guest(vcpu); } static bool kvm_pmu_counter_is_enabled(struct kvm_pmc *pmc) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 53749d3a0996..34688918c811 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -794,7 +794,6 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, if (!kvm_supports_32bit_el0()) val |= ARMV8_PMU_PMCR_LC; kvm_pmu_handle_pmcr(vcpu, val); - kvm_vcpu_pmu_restore_guest(vcpu); } else { /* PMCR.P & PMCR.C are RAZ */ val = __vcpu_sys_reg(vcpu, PMCR_EL0) @@ -856,6 +855,22 @@ static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx) return true; } +static int get_pmu_evcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, + u64 *val) +{ + u64 idx; + + if (r->CRn == 9 && r->CRm == 13 && r->Op2 == 0) + /* PMCCNTR_EL0 */ + idx = ARMV8_PMU_CYCLE_IDX; + else + /* PMEVCNTRn_EL0 */ + idx = ((r->CRm & 3) << 3) | (r->Op2 & 7); + + *val = kvm_pmu_get_counter_value(vcpu, idx); + return 0; +} + static bool access_pmu_evcntr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, const struct sys_reg_desc *r) @@ -1072,7 +1087,7 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, /* Macro to expand the PMEVCNTRn_EL0 register */ #define PMU_PMEVCNTR_EL0(n) \ { PMU_SYS_REG(SYS_PMEVCNTRn_EL0(n)), \ - .reset = reset_pmevcntr, \ + .reset = reset_pmevcntr, .get_user = get_pmu_evcntr, \ .access = access_pmu_evcntr, .reg = (PMEVCNTR0_EL0 + n), } /* Macro to expand the PMEVTYPERn_EL0 register */ @@ -1982,7 +1997,8 @@ static const struct sys_reg_desc sys_reg_descs[] = { { PMU_SYS_REG(SYS_PMCEID1_EL0), .access = access_pmceid, .reset = NULL }, { PMU_SYS_REG(SYS_PMCCNTR_EL0), - .access = access_pmu_evcntr, .reset = reset_unknown, .reg = PMCCNTR_EL0 }, + .access = access_pmu_evcntr, .reset = reset_unknown, + .reg = PMCCNTR_EL0, .get_user = get_pmu_evcntr}, { PMU_SYS_REG(SYS_PMXEVTYPER_EL0), .access = access_pmu_evtyper, .reset = NULL }, { PMU_SYS_REG(SYS_PMXEVCNTR_EL0), diff --git a/arch/arm64/lib/uaccess_flushcache.c b/arch/arm64/lib/uaccess_flushcache.c index baee22961bdb..7510d1a23124 100644 --- a/arch/arm64/lib/uaccess_flushcache.c +++ b/arch/arm64/lib/uaccess_flushcache.c @@ -19,12 +19,6 @@ void memcpy_flushcache(void *dst, const void *src, size_t cnt) } EXPORT_SYMBOL_GPL(memcpy_flushcache); -void memcpy_page_flushcache(char *to, struct page *page, size_t offset, - size_t len) -{ - memcpy_flushcache(to, page_address(page) + offset, len); -} - unsigned long __copy_user_flushcache(void *to, const void __user *from, unsigned long n) { diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile index ff1e800ba7a1..dbd1bc95967d 100644 --- a/arch/arm64/mm/Makefile +++ b/arch/arm64/mm/Makefile @@ -2,7 +2,7 @@ obj-y := dma-mapping.o extable.o fault.o init.o \ cache.o copypage.o flush.o \ ioremap.o mmap.o pgd.o mmu.o \ - context.o proc.o pageattr.o + context.o proc.o pageattr.o fixmap.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PTDUMP_CORE) += ptdump.o obj-$(CONFIG_PTDUMP_DEBUGFS) += ptdump_debugfs.o diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 5240f6acad64..3cb101e8cb29 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -36,22 +36,7 @@ void arch_dma_prep_coherent(struct page *page, size_t size) { unsigned long start = (unsigned long)page_address(page); - /* - * The architecture only requires a clean to the PoC here in order to - * meet the requirements of the DMA API. However, some vendors (i.e. - * Qualcomm) abuse the DMA API for transferring buffers from the - * non-secure to the secure world, resetting the system if a non-secure - * access shows up after the buffer has been transferred: - * - * https://lore.kernel.org/r/20221114110329.68413-1-manivannan.sadhasivam@linaro.org - * - * Using clean+invalidate appears to make this issue less likely, but - * the drivers themselves still need fixing as the CPU could issue a - * speculative read from the buffer via the linear mapping irrespective - * of the cache maintenance we use. Once the drivers are fixed, we can - * relax this to a clean operation. - */ - dcache_clean_inval_poc(start, start + size); + dcache_clean_poc(start, start + size); } #ifdef CONFIG_IOMMU_DMA diff --git a/arch/arm64/mm/fixmap.c b/arch/arm64/mm/fixmap.c new file mode 100644 index 000000000000..c0a3301203bd --- /dev/null +++ b/arch/arm64/mm/fixmap.c @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Fixmap manipulation code + */ + +#include <linux/bug.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/libfdt.h> +#include <linux/memory.h> +#include <linux/mm.h> +#include <linux/sizes.h> + +#include <asm/fixmap.h> +#include <asm/kernel-pgtable.h> +#include <asm/pgalloc.h> +#include <asm/tlbflush.h> + +#define NR_BM_PTE_TABLES \ + SPAN_NR_ENTRIES(FIXADDR_TOT_START, FIXADDR_TOP, PMD_SHIFT) +#define NR_BM_PMD_TABLES \ + SPAN_NR_ENTRIES(FIXADDR_TOT_START, FIXADDR_TOP, PUD_SHIFT) + +static_assert(NR_BM_PMD_TABLES == 1); + +#define __BM_TABLE_IDX(addr, shift) \ + (((addr) >> (shift)) - (FIXADDR_TOT_START >> (shift))) + +#define BM_PTE_TABLE_IDX(addr) __BM_TABLE_IDX(addr, PMD_SHIFT) + +static pte_t bm_pte[NR_BM_PTE_TABLES][PTRS_PER_PTE] __page_aligned_bss; +static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused; +static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused; + +static inline pte_t *fixmap_pte(unsigned long addr) +{ + return &bm_pte[BM_PTE_TABLE_IDX(addr)][pte_index(addr)]; +} + +static void __init early_fixmap_init_pte(pmd_t *pmdp, unsigned long addr) +{ + pmd_t pmd = READ_ONCE(*pmdp); + pte_t *ptep; + + if (pmd_none(pmd)) { + ptep = bm_pte[BM_PTE_TABLE_IDX(addr)]; + __pmd_populate(pmdp, __pa_symbol(ptep), PMD_TYPE_TABLE); + } +} + +static void __init early_fixmap_init_pmd(pud_t *pudp, unsigned long addr, + unsigned long end) +{ + unsigned long next; + pud_t pud = READ_ONCE(*pudp); + pmd_t *pmdp; + + if (pud_none(pud)) + __pud_populate(pudp, __pa_symbol(bm_pmd), PUD_TYPE_TABLE); + + pmdp = pmd_offset_kimg(pudp, addr); + do { + next = pmd_addr_end(addr, end); + early_fixmap_init_pte(pmdp, addr); + } while (pmdp++, addr = next, addr != end); +} + + +static void __init early_fixmap_init_pud(p4d_t *p4dp, unsigned long addr, + unsigned long end) +{ + p4d_t p4d = READ_ONCE(*p4dp); + pud_t *pudp; + + if (CONFIG_PGTABLE_LEVELS > 3 && !p4d_none(p4d) && + p4d_page_paddr(p4d) != __pa_symbol(bm_pud)) { + /* + * We only end up here if the kernel mapping and the fixmap + * share the top level pgd entry, which should only happen on + * 16k/4 levels configurations. + */ + BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES)); + } + + if (p4d_none(p4d)) + __p4d_populate(p4dp, __pa_symbol(bm_pud), P4D_TYPE_TABLE); + + pudp = pud_offset_kimg(p4dp, addr); + early_fixmap_init_pmd(pudp, addr, end); +} + +/* + * The p*d_populate functions call virt_to_phys implicitly so they can't be used + * directly on kernel symbols (bm_p*d). This function is called too early to use + * lm_alias so __p*d_populate functions must be used to populate with the + * physical address from __pa_symbol. + */ +void __init early_fixmap_init(void) +{ + unsigned long addr = FIXADDR_TOT_START; + unsigned long end = FIXADDR_TOP; + + pgd_t *pgdp = pgd_offset_k(addr); + p4d_t *p4dp = p4d_offset(pgdp, addr); + + early_fixmap_init_pud(p4dp, addr, end); +} + +/* + * Unusually, this is also called in IRQ context (ghes_iounmap_irq) so if we + * ever need to use IPIs for TLB broadcasting, then we're in trouble here. + */ +void __set_fixmap(enum fixed_addresses idx, + phys_addr_t phys, pgprot_t flags) +{ + unsigned long addr = __fix_to_virt(idx); + pte_t *ptep; + + BUG_ON(idx <= FIX_HOLE || idx >= __end_of_fixed_addresses); + + ptep = fixmap_pte(addr); + + if (pgprot_val(flags)) { + set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, flags)); + } else { + pte_clear(&init_mm, addr, ptep); + flush_tlb_kernel_range(addr, addr+PAGE_SIZE); + } +} + +void *__init fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot) +{ + const u64 dt_virt_base = __fix_to_virt(FIX_FDT); + phys_addr_t dt_phys_base; + int offset; + void *dt_virt; + + /* + * Check whether the physical FDT address is set and meets the minimum + * alignment requirement. Since we are relying on MIN_FDT_ALIGN to be + * at least 8 bytes so that we can always access the magic and size + * fields of the FDT header after mapping the first chunk, double check + * here if that is indeed the case. + */ + BUILD_BUG_ON(MIN_FDT_ALIGN < 8); + if (!dt_phys || dt_phys % MIN_FDT_ALIGN) + return NULL; + + dt_phys_base = round_down(dt_phys, PAGE_SIZE); + offset = dt_phys % PAGE_SIZE; + dt_virt = (void *)dt_virt_base + offset; + + /* map the first chunk so we can read the size from the header */ + create_mapping_noalloc(dt_phys_base, dt_virt_base, PAGE_SIZE, prot); + + if (fdt_magic(dt_virt) != FDT_MAGIC) + return NULL; + + *size = fdt_totalsize(dt_virt); + if (*size > MAX_FDT_SIZE) + return NULL; + + if (offset + *size > PAGE_SIZE) { + create_mapping_noalloc(dt_phys_base, dt_virt_base, + offset + *size, prot); + } + + return dt_virt; +} + +/* + * Copy the fixmap region into a new pgdir. + */ +void __init fixmap_copy(pgd_t *pgdir) +{ + if (!READ_ONCE(pgd_val(*pgd_offset_pgd(pgdir, FIXADDR_TOT_START)))) { + /* + * The fixmap falls in a separate pgd to the kernel, and doesn't + * live in the carveout for the swapper_pg_dir. We can simply + * re-use the existing dir for the fixmap. + */ + set_pgd(pgd_offset_pgd(pgdir, FIXADDR_TOT_START), + READ_ONCE(*pgd_offset_k(FIXADDR_TOT_START))); + } else if (CONFIG_PGTABLE_LEVELS > 3) { + pgd_t *bm_pgdp; + p4d_t *bm_p4dp; + pud_t *bm_pudp; + /* + * The fixmap shares its top level pgd entry with the kernel + * mapping. This can really only occur when we are running + * with 16k/4 levels, so we can simply reuse the pud level + * entry instead. + */ + BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES)); + bm_pgdp = pgd_offset_pgd(pgdir, FIXADDR_TOT_START); + bm_p4dp = p4d_offset(bm_pgdp, FIXADDR_TOT_START); + bm_pudp = pud_set_fixmap_offset(bm_p4dp, FIXADDR_TOT_START); + pud_populate(&init_mm, bm_pudp, lm_alias(bm_pmd)); + pud_clear_fixmap(); + } else { + BUG(); + } +} diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 58a0bb2c17f1..66e70ca47680 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -61,34 +61,8 @@ EXPORT_SYMBOL(memstart_addr); * unless restricted on specific platforms (e.g. 30-bit on Raspberry Pi 4). * In such case, ZONE_DMA32 covers the rest of the 32-bit addressable memory, * otherwise it is empty. - * - * Memory reservation for crash kernel either done early or deferred - * depending on DMA memory zones configs (ZONE_DMA) -- - * - * In absence of ZONE_DMA configs arm64_dma_phys_limit initialized - * here instead of max_zone_phys(). This lets early reservation of - * crash kernel memory which has a dependency on arm64_dma_phys_limit. - * Reserving memory early for crash kernel allows linear creation of block - * mappings (greater than page-granularity) for all the memory bank rangs. - * In this scheme a comparatively quicker boot is observed. - * - * If ZONE_DMA configs are defined, crash kernel memory reservation - * is delayed until DMA zone memory range size initialization performed in - * zone_sizes_init(). The defer is necessary to steer clear of DMA zone - * memory range to avoid overlap allocation. So crash kernel memory boundaries - * are not known when mapping all bank memory ranges, which otherwise means - * not possible to exclude crash kernel range from creating block mappings - * so page-granularity mappings are created for the entire memory range. - * Hence a slightly slower boot is observed. - * - * Note: Page-granularity mappings are necessary for crash kernel memory - * range for shrinking its size via /sys/kernel/kexec_crash_size interface. */ -#if IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32) phys_addr_t __ro_after_init arm64_dma_phys_limit; -#else -phys_addr_t __ro_after_init arm64_dma_phys_limit = PHYS_MASK + 1; -#endif /* Current arm64 boot protocol requires 2MB alignment */ #define CRASH_ALIGN SZ_2M @@ -248,6 +222,8 @@ static void __init zone_sizes_init(void) if (!arm64_dma_phys_limit) arm64_dma_phys_limit = dma32_phys_limit; #endif + if (!arm64_dma_phys_limit) + arm64_dma_phys_limit = PHYS_MASK + 1; max_zone_pfns[ZONE_NORMAL] = max_pfn; free_area_init(max_zone_pfns); @@ -408,9 +384,6 @@ void __init arm64_memblock_init(void) early_init_fdt_scan_reserved_mem(); - if (!defer_reserve_crashkernel()) - reserve_crashkernel(); - high_memory = __va(memblock_end_of_DRAM() - 1) + 1; } @@ -457,8 +430,7 @@ void __init bootmem_init(void) * request_standard_resources() depends on crashkernel's memory being * reserved, so do it here. */ - if (defer_reserve_crashkernel()) - reserve_crashkernel(); + reserve_crashkernel(); memblock_dump_all(); } diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 6f9d8898a025..af6bc8403ee4 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -24,6 +24,7 @@ #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/set_memory.h> +#include <linux/kfence.h> #include <asm/barrier.h> #include <asm/cputype.h> @@ -38,6 +39,7 @@ #include <asm/ptdump.h> #include <asm/tlbflush.h> #include <asm/pgalloc.h> +#include <asm/kfence.h> #define NO_BLOCK_MAPPINGS BIT(0) #define NO_CONT_MAPPINGS BIT(1) @@ -71,10 +73,6 @@ long __section(".mmuoff.data.write") __early_cpu_boot_status; unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)] __page_aligned_bss; EXPORT_SYMBOL(empty_zero_page); -static pte_t bm_pte[PTRS_PER_PTE] __page_aligned_bss; -static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused; -static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused; - static DEFINE_SPINLOCK(swapper_pgdir_lock); static DEFINE_MUTEX(fixmap_lock); @@ -450,8 +448,8 @@ static phys_addr_t pgd_pgtable_alloc(int shift) * without allocating new levels of table. Note that this permits the * creation of new section or page entries. */ -static void __init create_mapping_noalloc(phys_addr_t phys, unsigned long virt, - phys_addr_t size, pgprot_t prot) +void __init create_mapping_noalloc(phys_addr_t phys, unsigned long virt, + phys_addr_t size, pgprot_t prot) { if ((virt >= PAGE_END) && (virt < VMALLOC_START)) { pr_warn("BUG: not creating mapping for %pa at 0x%016lx - outside kernel range\n", @@ -510,20 +508,59 @@ void __init mark_linear_text_alias_ro(void) PAGE_KERNEL_RO); } -static bool crash_mem_map __initdata; +#ifdef CONFIG_KFENCE + +bool __ro_after_init kfence_early_init = !!CONFIG_KFENCE_SAMPLE_INTERVAL; -static int __init enable_crash_mem_map(char *arg) +/* early_param() will be parsed before map_mem() below. */ +static int __init parse_kfence_early_init(char *arg) { - /* - * Proper parameter parsing is done by reserve_crashkernel(). We only - * need to know if the linear map has to avoid block mappings so that - * the crashkernel reservations can be unmapped later. - */ - crash_mem_map = true; + int val; + if (get_option(&arg, &val)) + kfence_early_init = !!val; return 0; } -early_param("crashkernel", enable_crash_mem_map); +early_param("kfence.sample_interval", parse_kfence_early_init); + +static phys_addr_t __init arm64_kfence_alloc_pool(void) +{ + phys_addr_t kfence_pool; + + if (!kfence_early_init) + return 0; + + kfence_pool = memblock_phys_alloc(KFENCE_POOL_SIZE, PAGE_SIZE); + if (!kfence_pool) { + pr_err("failed to allocate kfence pool\n"); + kfence_early_init = false; + return 0; + } + + /* Temporarily mark as NOMAP. */ + memblock_mark_nomap(kfence_pool, KFENCE_POOL_SIZE); + + return kfence_pool; +} + +static void __init arm64_kfence_map_pool(phys_addr_t kfence_pool, pgd_t *pgdp) +{ + if (!kfence_pool) + return; + + /* KFENCE pool needs page-level mapping. */ + __map_memblock(pgdp, kfence_pool, kfence_pool + KFENCE_POOL_SIZE, + pgprot_tagged(PAGE_KERNEL), + NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS); + memblock_clear_nomap(kfence_pool, KFENCE_POOL_SIZE); + __kfence_pool = phys_to_virt(kfence_pool); +} +#else /* CONFIG_KFENCE */ + +static inline phys_addr_t arm64_kfence_alloc_pool(void) { return 0; } +static inline void arm64_kfence_map_pool(phys_addr_t kfence_pool, pgd_t *pgdp) { } + +#endif /* CONFIG_KFENCE */ static void __init map_mem(pgd_t *pgdp) { @@ -531,6 +568,7 @@ static void __init map_mem(pgd_t *pgdp) phys_addr_t kernel_start = __pa_symbol(_stext); phys_addr_t kernel_end = __pa_symbol(__init_begin); phys_addr_t start, end; + phys_addr_t early_kfence_pool; int flags = NO_EXEC_MAPPINGS; u64 i; @@ -543,6 +581,8 @@ static void __init map_mem(pgd_t *pgdp) */ BUILD_BUG_ON(pgd_index(direct_map_end - 1) == pgd_index(direct_map_end)); + early_kfence_pool = arm64_kfence_alloc_pool(); + if (can_set_direct_map()) flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS; @@ -554,16 +594,6 @@ static void __init map_mem(pgd_t *pgdp) */ memblock_mark_nomap(kernel_start, kernel_end - kernel_start); -#ifdef CONFIG_KEXEC_CORE - if (crash_mem_map) { - if (defer_reserve_crashkernel()) - flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS; - else if (crashk_res.end) - memblock_mark_nomap(crashk_res.start, - resource_size(&crashk_res)); - } -#endif - /* map all the memory banks */ for_each_mem_range(i, &start, &end) { if (start >= end) @@ -590,24 +620,7 @@ static void __init map_mem(pgd_t *pgdp) __map_memblock(pgdp, kernel_start, kernel_end, PAGE_KERNEL, NO_CONT_MAPPINGS); memblock_clear_nomap(kernel_start, kernel_end - kernel_start); - - /* - * Use page-level mappings here so that we can shrink the region - * in page granularity and put back unused memory to buddy system - * through /sys/kernel/kexec_crash_size interface. - */ -#ifdef CONFIG_KEXEC_CORE - if (crash_mem_map && !defer_reserve_crashkernel()) { - if (crashk_res.end) { - __map_memblock(pgdp, crashk_res.start, - crashk_res.end + 1, - PAGE_KERNEL, - NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS); - memblock_clear_nomap(crashk_res.start, - resource_size(&crashk_res)); - } - } -#endif + arm64_kfence_map_pool(early_kfence_pool, pgdp); } void mark_rodata_ro(void) @@ -734,34 +747,7 @@ static void __init map_kernel(pgd_t *pgdp) &vmlinux_initdata, 0, VM_NO_GUARD); map_kernel_segment(pgdp, _data, _end, PAGE_KERNEL, &vmlinux_data, 0, 0); - if (!READ_ONCE(pgd_val(*pgd_offset_pgd(pgdp, FIXADDR_START)))) { - /* - * The fixmap falls in a separate pgd to the kernel, and doesn't - * live in the carveout for the swapper_pg_dir. We can simply - * re-use the existing dir for the fixmap. - */ - set_pgd(pgd_offset_pgd(pgdp, FIXADDR_START), - READ_ONCE(*pgd_offset_k(FIXADDR_START))); - } else if (CONFIG_PGTABLE_LEVELS > 3) { - pgd_t *bm_pgdp; - p4d_t *bm_p4dp; - pud_t *bm_pudp; - /* - * The fixmap shares its top level pgd entry with the kernel - * mapping. This can really only occur when we are running - * with 16k/4 levels, so we can simply reuse the pud level - * entry instead. - */ - BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES)); - bm_pgdp = pgd_offset_pgd(pgdp, FIXADDR_START); - bm_p4dp = p4d_offset(bm_pgdp, FIXADDR_START); - bm_pudp = pud_set_fixmap_offset(bm_p4dp, FIXADDR_START); - pud_populate(&init_mm, bm_pudp, lm_alias(bm_pmd)); - pud_clear_fixmap(); - } else { - BUG(); - } - + fixmap_copy(pgdp); kasan_copy_shadow(pgdp); } @@ -1176,166 +1162,6 @@ void vmemmap_free(unsigned long start, unsigned long end, } #endif /* CONFIG_MEMORY_HOTPLUG */ -static inline pud_t *fixmap_pud(unsigned long addr) -{ - pgd_t *pgdp = pgd_offset_k(addr); - p4d_t *p4dp = p4d_offset(pgdp, addr); - p4d_t p4d = READ_ONCE(*p4dp); - - BUG_ON(p4d_none(p4d) || p4d_bad(p4d)); - - return pud_offset_kimg(p4dp, addr); -} - -static inline pmd_t *fixmap_pmd(unsigned long addr) -{ - pud_t *pudp = fixmap_pud(addr); - pud_t pud = READ_ONCE(*pudp); - - BUG_ON(pud_none(pud) || pud_bad(pud)); - - return pmd_offset_kimg(pudp, addr); -} - -static inline pte_t *fixmap_pte(unsigned long addr) -{ - return &bm_pte[pte_index(addr)]; -} - -/* - * The p*d_populate functions call virt_to_phys implicitly so they can't be used - * directly on kernel symbols (bm_p*d). This function is called too early to use - * lm_alias so __p*d_populate functions must be used to populate with the - * physical address from __pa_symbol. - */ -void __init early_fixmap_init(void) -{ - pgd_t *pgdp; - p4d_t *p4dp, p4d; - pud_t *pudp; - pmd_t *pmdp; - unsigned long addr = FIXADDR_START; - - pgdp = pgd_offset_k(addr); - p4dp = p4d_offset(pgdp, addr); - p4d = READ_ONCE(*p4dp); - if (CONFIG_PGTABLE_LEVELS > 3 && - !(p4d_none(p4d) || p4d_page_paddr(p4d) == __pa_symbol(bm_pud))) { - /* - * We only end up here if the kernel mapping and the fixmap - * share the top level pgd entry, which should only happen on - * 16k/4 levels configurations. - */ - BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES)); - pudp = pud_offset_kimg(p4dp, addr); - } else { - if (p4d_none(p4d)) - __p4d_populate(p4dp, __pa_symbol(bm_pud), P4D_TYPE_TABLE); - pudp = fixmap_pud(addr); - } - if (pud_none(READ_ONCE(*pudp))) - __pud_populate(pudp, __pa_symbol(bm_pmd), PUD_TYPE_TABLE); - pmdp = fixmap_pmd(addr); - __pmd_populate(pmdp, __pa_symbol(bm_pte), PMD_TYPE_TABLE); - - /* - * The boot-ioremap range spans multiple pmds, for which - * we are not prepared: - */ - BUILD_BUG_ON((__fix_to_virt(FIX_BTMAP_BEGIN) >> PMD_SHIFT) - != (__fix_to_virt(FIX_BTMAP_END) >> PMD_SHIFT)); - - if ((pmdp != fixmap_pmd(fix_to_virt(FIX_BTMAP_BEGIN))) - || pmdp != fixmap_pmd(fix_to_virt(FIX_BTMAP_END))) { - WARN_ON(1); - pr_warn("pmdp %p != %p, %p\n", - pmdp, fixmap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)), - fixmap_pmd(fix_to_virt(FIX_BTMAP_END))); - pr_warn("fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n", - fix_to_virt(FIX_BTMAP_BEGIN)); - pr_warn("fix_to_virt(FIX_BTMAP_END): %08lx\n", - fix_to_virt(FIX_BTMAP_END)); - - pr_warn("FIX_BTMAP_END: %d\n", FIX_BTMAP_END); - pr_warn("FIX_BTMAP_BEGIN: %d\n", FIX_BTMAP_BEGIN); - } -} - -/* - * Unusually, this is also called in IRQ context (ghes_iounmap_irq) so if we - * ever need to use IPIs for TLB broadcasting, then we're in trouble here. - */ -void __set_fixmap(enum fixed_addresses idx, - phys_addr_t phys, pgprot_t flags) -{ - unsigned long addr = __fix_to_virt(idx); - pte_t *ptep; - - BUG_ON(idx <= FIX_HOLE || idx >= __end_of_fixed_addresses); - - ptep = fixmap_pte(addr); - - if (pgprot_val(flags)) { - set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, flags)); - } else { - pte_clear(&init_mm, addr, ptep); - flush_tlb_kernel_range(addr, addr+PAGE_SIZE); - } -} - -void *__init fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot) -{ - const u64 dt_virt_base = __fix_to_virt(FIX_FDT); - int offset; - void *dt_virt; - - /* - * Check whether the physical FDT address is set and meets the minimum - * alignment requirement. Since we are relying on MIN_FDT_ALIGN to be - * at least 8 bytes so that we can always access the magic and size - * fields of the FDT header after mapping the first chunk, double check - * here if that is indeed the case. - */ - BUILD_BUG_ON(MIN_FDT_ALIGN < 8); - if (!dt_phys || dt_phys % MIN_FDT_ALIGN) - return NULL; - - /* - * Make sure that the FDT region can be mapped without the need to - * allocate additional translation table pages, so that it is safe - * to call create_mapping_noalloc() this early. - * - * On 64k pages, the FDT will be mapped using PTEs, so we need to - * be in the same PMD as the rest of the fixmap. - * On 4k pages, we'll use section mappings for the FDT so we only - * have to be in the same PUD. - */ - BUILD_BUG_ON(dt_virt_base % SZ_2M); - - BUILD_BUG_ON(__fix_to_virt(FIX_FDT_END) >> SWAPPER_TABLE_SHIFT != - __fix_to_virt(FIX_BTMAP_BEGIN) >> SWAPPER_TABLE_SHIFT); - - offset = dt_phys % SWAPPER_BLOCK_SIZE; - dt_virt = (void *)dt_virt_base + offset; - - /* map the first chunk so we can read the size from the header */ - create_mapping_noalloc(round_down(dt_phys, SWAPPER_BLOCK_SIZE), - dt_virt_base, SWAPPER_BLOCK_SIZE, prot); - - if (fdt_magic(dt_virt) != FDT_MAGIC) - return NULL; - - *size = fdt_totalsize(dt_virt); - if (*size > MAX_FDT_SIZE) - return NULL; - - if (offset + *size > SWAPPER_BLOCK_SIZE) - create_mapping_noalloc(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base, - round_up(offset + *size, SWAPPER_BLOCK_SIZE), prot); - - return dt_virt; -} - int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot) { pud_t new_pud = pfn_pud(__phys_to_pfn(phys), mk_pud_sect_prot(prot)); diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index 79dd201c59d8..8e2017ba5f1b 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -11,6 +11,7 @@ #include <asm/cacheflush.h> #include <asm/set_memory.h> #include <asm/tlbflush.h> +#include <asm/kfence.h> struct page_change_data { pgprot_t set_mask; @@ -22,12 +23,14 @@ bool rodata_full __ro_after_init = IS_ENABLED(CONFIG_RODATA_FULL_DEFAULT_ENABLED bool can_set_direct_map(void) { /* - * rodata_full, DEBUG_PAGEALLOC and KFENCE require linear map to be + * rodata_full and DEBUG_PAGEALLOC require linear map to be * mapped at page granularity, so that it is possible to * protect/unprotect single pages. + * + * KFENCE pool requires page-granular mapping if initialized late. */ return (rodata_enabled && rodata_full) || debug_pagealloc_enabled() || - IS_ENABLED(CONFIG_KFENCE); + arm64_kfence_can_set_direct_map(); } static int change_page_range(pte_t *ptep, unsigned long addr, void *data) diff --git a/arch/arm64/mm/ptdump.c b/arch/arm64/mm/ptdump.c index 9bc4066c5bf3..e305b6593c4e 100644 --- a/arch/arm64/mm/ptdump.c +++ b/arch/arm64/mm/ptdump.c @@ -45,7 +45,7 @@ static struct addr_marker address_markers[] = { { MODULES_END, "Modules end" }, { VMALLOC_START, "vmalloc() area" }, { VMALLOC_END, "vmalloc() end" }, - { FIXADDR_START, "Fixmap start" }, + { FIXADDR_TOT_START, "Fixmap start" }, { FIXADDR_TOP, "Fixmap end" }, { PCI_IO_START, "PCI I/O start" }, { PCI_IO_END, "PCI I/O end" }, diff --git a/arch/arm64/net/bpf_jit.h b/arch/arm64/net/bpf_jit.h index a6acb94ea3d6..c2edadb8ec6a 100644 --- a/arch/arm64/net/bpf_jit.h +++ b/arch/arm64/net/bpf_jit.h @@ -281,4 +281,8 @@ /* DMB */ #define A64_DMB_ISH aarch64_insn_gen_dmb(AARCH64_INSN_MB_ISH) +/* ADR */ +#define A64_ADR(Rd, offset) \ + aarch64_insn_gen_adr(0, offset, Rd, AARCH64_INSN_ADR_TYPE_ADR) + #endif /* _BPF_JIT_H */ diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index 62f805f427b7..b26da8efa616 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -1900,7 +1900,8 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im, restore_args(ctx, args_off, nargs); /* call original func */ emit(A64_LDR64I(A64_R(10), A64_SP, retaddr_off), ctx); - emit(A64_BLR(A64_R(10)), ctx); + emit(A64_ADR(A64_LR, AARCH64_INSN_SIZE * 2), ctx); + emit(A64_RET(A64_R(10)), ctx); /* store return value */ emit(A64_STR64I(A64_R(0), A64_SP, retval_off), ctx); /* reserve a nop for bpf_tramp_image_put */ diff --git a/arch/arm64/tools/gen-sysreg.awk b/arch/arm64/tools/gen-sysreg.awk index 6fa0468caa00..d1254a056114 100755 --- a/arch/arm64/tools/gen-sysreg.awk +++ b/arch/arm64/tools/gen-sysreg.awk @@ -4,23 +4,35 @@ # # Usage: awk -f gen-sysreg.awk sysregs.txt +function block_current() { + return __current_block[__current_block_depth]; +} + # Log an error and terminate function fatal(msg) { print "Error at " NR ": " msg > "/dev/stderr" + + printf "Current block nesting:" + + for (i = 0; i <= __current_block_depth; i++) { + printf " " __current_block[i] + } + printf "\n" + exit 1 } -# Sanity check that the start or end of a block makes sense at this point in -# the file. If not, produce an error and terminate. -# -# @this - the $Block or $EndBlock -# @prev - the only valid block to already be in (value of @block) -# @new - the new value of @block -function change_block(this, prev, new) { - if (block != prev) - fatal("unexpected " this " (inside " block ")") - - block = new +# Enter a new block, setting the active block to @block +function block_push(block) { + __current_block[++__current_block_depth] = block +} + +# Exit a block, setting the active block to the parent block +function block_pop() { + if (__current_block_depth == 0) + fatal("error: block_pop() in root block") + + __current_block_depth--; } # Sanity check the number of records for a field makes sense. If not, produce @@ -84,10 +96,14 @@ BEGIN { print "/* Generated file - do not edit */" print "" - block = "None" + __current_block_depth = 0 + __current_block[__current_block_depth] = "Root" } END { + if (__current_block_depth != 0) + fatal("Missing terminator for " block_current() " block") + print "#endif /* __ASM_SYSREG_DEFS_H */" } @@ -95,8 +111,9 @@ END { /^$/ { next } /^[\t ]*#/ { next } -/^SysregFields/ { - change_block("SysregFields", "None", "SysregFields") +/^SysregFields/ && block_current() == "Root" { + block_push("SysregFields") + expect_fields(2) reg = $2 @@ -110,12 +127,10 @@ END { next } -/^EndSysregFields/ { +/^EndSysregFields/ && block_current() == "SysregFields" { if (next_bit > 0) fatal("Unspecified bits in " reg) - change_block("EndSysregFields", "SysregFields", "None") - define(reg "_RES0", "(" res0 ")") define(reg "_RES1", "(" res1 ")") define(reg "_UNKN", "(" unkn ")") @@ -126,11 +141,13 @@ END { res1 = null unkn = null + block_pop() next } -/^Sysreg/ { - change_block("Sysreg", "None", "Sysreg") +/^Sysreg/ && block_current() == "Root" { + block_push("Sysreg") + expect_fields(7) reg = $2 @@ -160,12 +177,10 @@ END { next } -/^EndSysreg/ { +/^EndSysreg/ && block_current() == "Sysreg" { if (next_bit > 0) fatal("Unspecified bits in " reg) - change_block("EndSysreg", "Sysreg", "None") - if (res0 != null) define(reg "_RES0", "(" res0 ")") if (res1 != null) @@ -185,12 +200,13 @@ END { res1 = null unkn = null + block_pop() next } # Currently this is effectivey a comment, in future we may want to emit # defines for the fields. -/^Fields/ && (block == "Sysreg") { +/^Fields/ && block_current() == "Sysreg" { expect_fields(2) if (next_bit != 63) @@ -208,7 +224,7 @@ END { } -/^Res0/ && (block == "Sysreg" || block == "SysregFields") { +/^Res0/ && (block_current() == "Sysreg" || block_current() == "SysregFields") { expect_fields(2) parse_bitdef(reg, "RES0", $2) field = "RES0_" msb "_" lsb @@ -218,7 +234,7 @@ END { next } -/^Res1/ && (block == "Sysreg" || block == "SysregFields") { +/^Res1/ && (block_current() == "Sysreg" || block_current() == "SysregFields") { expect_fields(2) parse_bitdef(reg, "RES1", $2) field = "RES1_" msb "_" lsb @@ -228,7 +244,7 @@ END { next } -/^Unkn/ && (block == "Sysreg" || block == "SysregFields") { +/^Unkn/ && (block_current() == "Sysreg" || block_current() == "SysregFields") { expect_fields(2) parse_bitdef(reg, "UNKN", $2) field = "UNKN_" msb "_" lsb @@ -238,7 +254,7 @@ END { next } -/^Field/ && (block == "Sysreg" || block == "SysregFields") { +/^Field/ && (block_current() == "Sysreg" || block_current() == "SysregFields") { expect_fields(3) field = $3 parse_bitdef(reg, field, $2) @@ -249,15 +265,16 @@ END { next } -/^Raz/ && (block == "Sysreg" || block == "SysregFields") { +/^Raz/ && (block_current() == "Sysreg" || block_current() == "SysregFields") { expect_fields(2) parse_bitdef(reg, field, $2) next } -/^SignedEnum/ { - change_block("Enum<", "Sysreg", "Enum") +/^SignedEnum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") { + block_push("Enum") + expect_fields(3) field = $3 parse_bitdef(reg, field, $2) @@ -268,8 +285,9 @@ END { next } -/^UnsignedEnum/ { - change_block("Enum<", "Sysreg", "Enum") +/^UnsignedEnum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") { + block_push("Enum") + expect_fields(3) field = $3 parse_bitdef(reg, field, $2) @@ -280,8 +298,9 @@ END { next } -/^Enum/ { - change_block("Enum", "Sysreg", "Enum") +/^Enum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") { + block_push("Enum") + expect_fields(3) field = $3 parse_bitdef(reg, field, $2) @@ -291,16 +310,18 @@ END { next } -/^EndEnum/ { - change_block("EndEnum", "Enum", "Sysreg") +/^EndEnum/ && block_current() == "Enum" { + field = null msb = null lsb = null print "" + + block_pop() next } -/0b[01]+/ && block == "Enum" { +/0b[01]+/ && block_current() == "Enum" { expect_fields(2) val = $1 name = $2 diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg index dd5a9c7e310f..77edce16f4f9 100644 --- a/arch/arm64/tools/sysreg +++ b/arch/arm64/tools/sysreg @@ -879,7 +879,30 @@ EndEnum EndSysreg Sysreg ID_AA64PFR1_EL1 3 0 0 4 1 -Res0 63:40 +UnsignedEnum 63:60 PFAR + 0b0000 NI + 0b0001 IMP +EndEnum +UnsignedEnum 59:56 DF2 + 0b0000 NI + 0b0001 IMP +EndEnum +UnsignedEnum 55:52 MTEX + 0b0000 MTE + 0b0001 MTE4 +EndEnum +UnsignedEnum 51:48 THE + 0b0000 NI + 0b0001 IMP +EndEnum +UnsignedEnum 47:44 GCS + 0b0000 NI + 0b0001 IMP +EndEnum +Enum 43:40 MTE_frac + 0b0000 ASYNC + 0b1111 NI +EndEnum UnsignedEnum 39:36 NMI 0b0000 NI 0b0001 IMP @@ -1866,6 +1889,146 @@ Field 1 ZA Field 0 SM EndSysreg +SysregFields HFGxTR_EL2 +Field 63 nAMIAIR2_EL1 +Field 62 nMAIR2_EL1 +Field 61 nS2POR_EL1 +Field 60 nPOR_EL1 +Field 59 nPOR_EL0 +Field 58 nPIR_EL1 +Field 57 nPIRE0_EL1 +Field 56 nRCWMASK_EL1 +Field 55 nTPIDR2_EL0 +Field 54 nSMPRI_EL1 +Field 53 nGCS_EL1 +Field 52 nGCS_EL0 +Res0 51 +Field 50 nACCDATA_EL1 +Field 49 ERXADDR_EL1 +Field 48 EXRPFGCDN_EL1 +Field 47 EXPFGCTL_EL1 +Field 46 EXPFGF_EL1 +Field 45 ERXMISCn_EL1 +Field 44 ERXSTATUS_EL1 +Field 43 ERXCTLR_EL1 +Field 42 ERXFR_EL1 +Field 41 ERRSELR_EL1 +Field 40 ERRIDR_EL1 +Field 39 ICC_IGRPENn_EL1 +Field 38 VBAR_EL1 +Field 37 TTBR1_EL1 +Field 36 TTBR0_EL1 +Field 35 TPIDR_EL0 +Field 34 TPIDRRO_EL0 +Field 33 TPIDR_EL1 +Field 32 TCR_EL1 +Field 31 SCTXNUM_EL0 +Field 30 SCTXNUM_EL1 +Field 29 SCTLR_EL1 +Field 28 REVIDR_EL1 +Field 27 PAR_EL1 +Field 26 MPIDR_EL1 +Field 25 MIDR_EL1 +Field 24 MAIR_EL1 +Field 23 LORSA_EL1 +Field 22 LORN_EL1 +Field 21 LORID_EL1 +Field 20 LOREA_EL1 +Field 19 LORC_EL1 +Field 18 ISR_EL1 +Field 17 FAR_EL1 +Field 16 ESR_EL1 +Field 15 DCZID_EL0 +Field 14 CTR_EL0 +Field 13 CSSELR_EL1 +Field 12 CPACR_EL1 +Field 11 CONTEXTIDR_EL1 +Field 10 CLIDR_EL1 +Field 9 CCSIDR_EL1 +Field 8 APIBKey +Field 7 APIAKey +Field 6 APGAKey +Field 5 APDBKey +Field 4 APDAKey +Field 3 AMAIR_EL1 +Field 2 AIDR_EL1 +Field 1 AFSR1_EL1 +Field 0 AFSR0_EL1 +EndSysregFields + +Sysreg HFGRTR_EL2 3 4 1 1 4 +Fields HFGxTR_EL2 +EndSysreg + +Sysreg HFGWTR_EL2 3 4 1 1 5 +Fields HFGxTR_EL2 +EndSysreg + +Sysreg HFGITR_EL2 3 4 1 1 6 +Res0 63:61 +Field 60 COSPRCTX +Field 59 nGCSEPP +Field 58 nGCSSTR_EL1 +Field 57 nGCSPUSHM_EL1 +Field 56 nBRBIALL +Field 55 nBRBINJ +Field 54 DCCVAC +Field 53 SVC_EL1 +Field 52 SVC_EL0 +Field 51 ERET +Field 50 CPPRCTX +Field 49 DVPRCTX +Field 48 CFPRCTX +Field 47 TLBIVAALE1 +Field 46 TLBIVALE1 +Field 45 TLBIVAAE1 +Field 44 TLBIASIDE1 +Field 43 TLBIVAE1 +Field 42 TLBIVMALLE1 +Field 41 TLBIRVAALE1 +Field 40 TLBIRVALE1 +Field 39 TLBIRVAAE1 +Field 38 TLBIRVAE1 +Field 37 TLBIRVAALE1IS +Field 36 TLBIRVALE1IS +Field 35 TLBIRVAAE1IS +Field 34 TLBIRVAE1IS +Field 33 TLBIVAALE1IS +Field 32 TLBIVALE1IS +Field 31 TLBIVAAE1IS +Field 30 TLBIASIDE1IS +Field 29 TLBIVAE1IS +Field 28 TLBIVMALLE1IS +Field 27 TLBIRVAALE1OS +Field 26 TLBIRVALE1OS +Field 25 TLBIRVAAE1OS +Field 24 TLBIRVAE1OS +Field 23 TLBIVAALE1OS +Field 22 TLBIVALE1OS +Field 21 TLBIVAAE1OS +Field 20 TLBIASIDE1OS +Field 19 TLBIVAE1OS +Field 18 TLBIVMALLE1OS +Field 17 ATS1E1WP +Field 16 ATS1E1RP +Field 15 ATS1E0W +Field 14 ATS1E0R +Field 13 ATS1E1W +Field 12 ATS1E1R +Field 11 DCZVA +Field 10 DCCIVAC +Field 9 DCCVADP +Field 8 DCCVAP +Field 7 DCCVAU +Field 6 DCCISW +Field 5 DCCSW +Field 4 DCISW +Field 3 DCIVAC +Field 2 ICIVAU +Field 1 ICIALLU +Field 0 ICIALLUIS +EndSysreg + Sysreg ZCR_EL2 3 4 1 2 0 Fields ZCR_ELx EndSysreg diff --git a/arch/csky/include/asm/processor.h b/arch/csky/include/asm/processor.h index ea75d72dea86..e487a46d1c37 100644 --- a/arch/csky/include/asm/processor.h +++ b/arch/csky/include/asm/processor.h @@ -72,8 +72,6 @@ struct task_struct; /* Prepare to copy thread state - unlazy all lazy status */ #define prepare_to_copy(tsk) do { } while (0) -extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - unsigned long __get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) diff --git a/arch/csky/kernel/vdso/Makefile b/arch/csky/kernel/vdso/Makefile index 0b6909f10667..299e4e41ebc5 100644 --- a/arch/csky/kernel/vdso/Makefile +++ b/arch/csky/kernel/vdso/Makefile @@ -1,8 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only -# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before -# the inclusion of generic Makefile. -ARCH_REL_TYPE_ABS := R_CKCORE_ADDR32|R_CKCORE_JUMP_SLOT +# Include the generic Makefile to check the built vdso. include $(srctree)/lib/vdso/Makefile # Symbols present in the vdso diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index d7e4a24e8644..2e13ec8263b9 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -25,6 +25,7 @@ config IA64 select PCI_DOMAINS if PCI select PCI_MSI select PCI_SYSCALL if PCI + select HAS_IOPORT select HAVE_ASM_MODVERSIONS select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_EXIT_THREAD diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 21dfa4aa35bb..033f5aead88a 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -853,7 +853,7 @@ valid_phys_addr_range (phys_addr_t phys_addr, unsigned long size) * /dev/mem reads and writes use copy_to_user(), which implicitly * uses a granule-sized kernel identity mapping. It's really * only safe to do this for regions in kern_memmap. For more - * details, see Documentation/ia64/aliasing.rst. + * details, see Documentation/arch/ia64/aliasing.rst. */ attr = kern_mem_attribute(phys_addr, size); if (attr & EFI_MEMORY_WB || attr & EFI_MEMORY_UC) diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index 2094f3249019..cc4733e9990a 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -28,7 +28,7 @@ #include <asm/native/inst.h> /* - * See Documentation/ia64/fsys.rst for details on fsyscalls. + * See Documentation/arch/ia64/fsys.rst for details on fsyscalls. * * On entry to an fsyscall handler: * r10 = 0 (i.e., defaults to "successful syscall return") diff --git a/arch/ia64/mm/ioremap.c b/arch/ia64/mm/ioremap.c index 55fd3eb753ff..92b81bc91397 100644 --- a/arch/ia64/mm/ioremap.c +++ b/arch/ia64/mm/ioremap.c @@ -43,7 +43,7 @@ ioremap (unsigned long phys_addr, unsigned long size) /* * For things in kern_memmap, we must use the same attribute * as the rest of the kernel. For more details, see - * Documentation/ia64/aliasing.rst. + * Documentation/arch/ia64/aliasing.rst. */ attr = kern_mem_attribute(phys_addr, size); if (attr & EFI_MEMORY_WB) diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 211757e34198..0a0328e61bef 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -448,7 +448,7 @@ pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma, return -ENOSYS; /* - * Avoid attribute aliasing. See Documentation/ia64/aliasing.rst + * Avoid attribute aliasing. See Documentation/arch/ia64/aliasing.rst * for more details. */ if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size)) diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index 7fd51257e0ed..3a19045a76f7 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -80,6 +80,7 @@ config LOONGARCH select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL select GPIOLIB + select HAS_IOPORT select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_MMAP_RND_BITS if MMU select HAVE_ARCH_SECCOMP_FILTER @@ -447,6 +448,22 @@ config ARCH_IOREMAP protection support. However, you can enable LoongArch DMW-based ioremap() for better performance. +config ARCH_WRITECOMBINE + bool "Enable WriteCombine (WUC) for ioremap()" + help + LoongArch maintains cache coherency in hardware, but when paired + with LS7A chipsets the WUC attribute (Weak-ordered UnCached, which + is similar to WriteCombine) is out of the scope of cache coherency + machanism for PCIe devices (this is a PCIe protocol violation, which + may be fixed in newer chipsets). + + This means WUC can only used for write-only memory regions now, so + this option is disabled by default, making WUC silently fallback to + SUC for ioremap(). You can enable this option if the kernel is ensured + to run on hardware without this bug. + + You can override this setting via writecombine=on/off boot parameter. + config ARCH_STRICT_ALIGN bool "Enable -mstrict-align to prevent unaligned accesses" if EXPERT default y diff --git a/arch/loongarch/configs/loongson3_defconfig b/arch/loongarch/configs/loongson3_defconfig index e18213f01cc4..6cd26dd3c134 100644 --- a/arch/loongarch/configs/loongson3_defconfig +++ b/arch/loongarch/configs/loongson3_defconfig @@ -487,7 +487,6 @@ CONFIG_CHELSIO_T4=m CONFIG_E1000=y CONFIG_E1000E=y CONFIG_IGB=y -CONFIG_IXGB=y CONFIG_IXGBE=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set diff --git a/arch/loongarch/include/asm/acpi.h b/arch/loongarch/include/asm/acpi.h index 4198753aa1d0..976a810352c6 100644 --- a/arch/loongarch/include/asm/acpi.h +++ b/arch/loongarch/include/asm/acpi.h @@ -41,8 +41,11 @@ extern void loongarch_suspend_enter(void); static inline unsigned long acpi_get_wakeup_address(void) { +#ifdef CONFIG_SUSPEND extern void loongarch_wakeup_start(void); return (unsigned long)loongarch_wakeup_start; +#endif + return 0UL; } #endif /* _ASM_LOONGARCH_ACPI_H */ diff --git a/arch/loongarch/include/asm/addrspace.h b/arch/loongarch/include/asm/addrspace.h index 8fb699b4d40a..5c9c03bdf915 100644 --- a/arch/loongarch/include/asm/addrspace.h +++ b/arch/loongarch/include/asm/addrspace.h @@ -71,9 +71,9 @@ extern unsigned long vm_map_base; #define _ATYPE32_ int #define _ATYPE64_ __s64 #ifdef CONFIG_64BIT -#define _CONST64_(x) x ## L +#define _CONST64_(x) x ## UL #else -#define _CONST64_(x) x ## LL +#define _CONST64_(x) x ## ULL #endif #endif diff --git a/arch/loongarch/include/asm/bootinfo.h b/arch/loongarch/include/asm/bootinfo.h index 0051b526ac6d..c60796869b2b 100644 --- a/arch/loongarch/include/asm/bootinfo.h +++ b/arch/loongarch/include/asm/bootinfo.h @@ -13,7 +13,6 @@ const char *get_system_type(void); extern void init_environ(void); extern void memblock_init(void); extern void platform_init(void); -extern void plat_swiotlb_setup(void); extern int __init init_numa_memory(void); struct loongson_board_info { diff --git a/arch/loongarch/include/asm/cpu-features.h b/arch/loongarch/include/asm/cpu-features.h index b07974218393..f6177f133477 100644 --- a/arch/loongarch/include/asm/cpu-features.h +++ b/arch/loongarch/include/asm/cpu-features.h @@ -42,6 +42,7 @@ #define cpu_has_fpu cpu_opt(LOONGARCH_CPU_FPU) #define cpu_has_lsx cpu_opt(LOONGARCH_CPU_LSX) #define cpu_has_lasx cpu_opt(LOONGARCH_CPU_LASX) +#define cpu_has_crc32 cpu_opt(LOONGARCH_CPU_CRC32) #define cpu_has_complex cpu_opt(LOONGARCH_CPU_COMPLEX) #define cpu_has_crypto cpu_opt(LOONGARCH_CPU_CRYPTO) #define cpu_has_lvz cpu_opt(LOONGARCH_CPU_LVZ) diff --git a/arch/loongarch/include/asm/cpu.h b/arch/loongarch/include/asm/cpu.h index c3da91759472..88773d849e33 100644 --- a/arch/loongarch/include/asm/cpu.h +++ b/arch/loongarch/include/asm/cpu.h @@ -78,25 +78,26 @@ enum cpu_type_enum { #define CPU_FEATURE_FPU 3 /* CPU has FPU */ #define CPU_FEATURE_LSX 4 /* CPU has LSX (128-bit SIMD) */ #define CPU_FEATURE_LASX 5 /* CPU has LASX (256-bit SIMD) */ -#define CPU_FEATURE_COMPLEX 6 /* CPU has Complex instructions */ -#define CPU_FEATURE_CRYPTO 7 /* CPU has Crypto instructions */ -#define CPU_FEATURE_LVZ 8 /* CPU has Virtualization extension */ -#define CPU_FEATURE_LBT_X86 9 /* CPU has X86 Binary Translation */ -#define CPU_FEATURE_LBT_ARM 10 /* CPU has ARM Binary Translation */ -#define CPU_FEATURE_LBT_MIPS 11 /* CPU has MIPS Binary Translation */ -#define CPU_FEATURE_TLB 12 /* CPU has TLB */ -#define CPU_FEATURE_CSR 13 /* CPU has CSR */ -#define CPU_FEATURE_WATCH 14 /* CPU has watchpoint registers */ -#define CPU_FEATURE_VINT 15 /* CPU has vectored interrupts */ -#define CPU_FEATURE_CSRIPI 16 /* CPU has CSR-IPI */ -#define CPU_FEATURE_EXTIOI 17 /* CPU has EXT-IOI */ -#define CPU_FEATURE_PREFETCH 18 /* CPU has prefetch instructions */ -#define CPU_FEATURE_PMP 19 /* CPU has perfermance counter */ -#define CPU_FEATURE_SCALEFREQ 20 /* CPU supports cpufreq scaling */ -#define CPU_FEATURE_FLATMODE 21 /* CPU has flat mode */ -#define CPU_FEATURE_EIODECODE 22 /* CPU has EXTIOI interrupt pin decode mode */ -#define CPU_FEATURE_GUESTID 23 /* CPU has GuestID feature */ -#define CPU_FEATURE_HYPERVISOR 24 /* CPU has hypervisor (running in VM) */ +#define CPU_FEATURE_CRC32 6 /* CPU has CRC32 instructions */ +#define CPU_FEATURE_COMPLEX 7 /* CPU has Complex instructions */ +#define CPU_FEATURE_CRYPTO 8 /* CPU has Crypto instructions */ +#define CPU_FEATURE_LVZ 9 /* CPU has Virtualization extension */ +#define CPU_FEATURE_LBT_X86 10 /* CPU has X86 Binary Translation */ +#define CPU_FEATURE_LBT_ARM 11 /* CPU has ARM Binary Translation */ +#define CPU_FEATURE_LBT_MIPS 12 /* CPU has MIPS Binary Translation */ +#define CPU_FEATURE_TLB 13 /* CPU has TLB */ +#define CPU_FEATURE_CSR 14 /* CPU has CSR */ +#define CPU_FEATURE_WATCH 15 /* CPU has watchpoint registers */ +#define CPU_FEATURE_VINT 16 /* CPU has vectored interrupts */ +#define CPU_FEATURE_CSRIPI 17 /* CPU has CSR-IPI */ +#define CPU_FEATURE_EXTIOI 18 /* CPU has EXT-IOI */ +#define CPU_FEATURE_PREFETCH 19 /* CPU has prefetch instructions */ +#define CPU_FEATURE_PMP 20 /* CPU has perfermance counter */ +#define CPU_FEATURE_SCALEFREQ 21 /* CPU supports cpufreq scaling */ +#define CPU_FEATURE_FLATMODE 22 /* CPU has flat mode */ +#define CPU_FEATURE_EIODECODE 23 /* CPU has EXTIOI interrupt pin decode mode */ +#define CPU_FEATURE_GUESTID 24 /* CPU has GuestID feature */ +#define CPU_FEATURE_HYPERVISOR 25 /* CPU has hypervisor (running in VM) */ #define LOONGARCH_CPU_CPUCFG BIT_ULL(CPU_FEATURE_CPUCFG) #define LOONGARCH_CPU_LAM BIT_ULL(CPU_FEATURE_LAM) @@ -104,6 +105,7 @@ enum cpu_type_enum { #define LOONGARCH_CPU_FPU BIT_ULL(CPU_FEATURE_FPU) #define LOONGARCH_CPU_LSX BIT_ULL(CPU_FEATURE_LSX) #define LOONGARCH_CPU_LASX BIT_ULL(CPU_FEATURE_LASX) +#define LOONGARCH_CPU_CRC32 BIT_ULL(CPU_FEATURE_CRC32) #define LOONGARCH_CPU_COMPLEX BIT_ULL(CPU_FEATURE_COMPLEX) #define LOONGARCH_CPU_CRYPTO BIT_ULL(CPU_FEATURE_CRYPTO) #define LOONGARCH_CPU_LVZ BIT_ULL(CPU_FEATURE_LVZ) diff --git a/arch/loongarch/include/asm/io.h b/arch/loongarch/include/asm/io.h index 402a7d9e3a53..545e2708fbf7 100644 --- a/arch/loongarch/include/asm/io.h +++ b/arch/loongarch/include/asm/io.h @@ -54,8 +54,10 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size, * @offset: bus address of the memory * @size: size of the resource to map */ +extern pgprot_t pgprot_wc; + #define ioremap_wc(offset, size) \ - ioremap_prot((offset), (size), pgprot_val(PAGE_KERNEL_WUC)) + ioremap_prot((offset), (size), pgprot_val(pgprot_wc)) #define ioremap_cache(offset, size) \ ioremap_prot((offset), (size), pgprot_val(PAGE_KERNEL)) diff --git a/arch/loongarch/include/asm/loongarch.h b/arch/loongarch/include/asm/loongarch.h index 65b7dcdea16d..83da5d29e2d1 100644 --- a/arch/loongarch/include/asm/loongarch.h +++ b/arch/loongarch/include/asm/loongarch.h @@ -117,7 +117,7 @@ static inline u32 read_cpucfg(u32 reg) #define CPUCFG1_EP BIT(22) #define CPUCFG1_RPLV BIT(23) #define CPUCFG1_HUGEPG BIT(24) -#define CPUCFG1_IOCSRBRD BIT(25) +#define CPUCFG1_CRC32 BIT(25) #define CPUCFG1_MSGINT BIT(26) #define LOONGARCH_CPUCFG2 0x2 @@ -423,9 +423,9 @@ static __always_inline void iocsr_write64(u64 val, u32 reg) #define CSR_ASID_ASID_WIDTH 10 #define CSR_ASID_ASID (_ULCAST_(0x3ff) << CSR_ASID_ASID_SHIFT) -#define LOONGARCH_CSR_PGDL 0x19 /* Page table base address when VA[47] = 0 */ +#define LOONGARCH_CSR_PGDL 0x19 /* Page table base address when VA[VALEN-1] = 0 */ -#define LOONGARCH_CSR_PGDH 0x1a /* Page table base address when VA[47] = 1 */ +#define LOONGARCH_CSR_PGDH 0x1a /* Page table base address when VA[VALEN-1] = 1 */ #define LOONGARCH_CSR_PGD 0x1b /* Page table base */ diff --git a/arch/loongarch/include/asm/module.lds.h b/arch/loongarch/include/asm/module.lds.h index 438f09d4ccf4..88554f92e010 100644 --- a/arch/loongarch/include/asm/module.lds.h +++ b/arch/loongarch/include/asm/module.lds.h @@ -2,8 +2,8 @@ /* Copyright (C) 2020-2022 Loongson Technology Corporation Limited */ SECTIONS { . = ALIGN(4); - .got : { BYTE(0) } - .plt : { BYTE(0) } - .plt.idx : { BYTE(0) } - .ftrace_trampoline : { BYTE(0) } + .got 0 : { BYTE(0) } + .plt 0 : { BYTE(0) } + .plt.idx 0 : { BYTE(0) } + .ftrace_trampoline 0 : { BYTE(0) } } diff --git a/arch/loongarch/include/uapi/asm/ptrace.h b/arch/loongarch/include/uapi/asm/ptrace.h index cc48ed262021..82d811b5c6e9 100644 --- a/arch/loongarch/include/uapi/asm/ptrace.h +++ b/arch/loongarch/include/uapi/asm/ptrace.h @@ -47,11 +47,12 @@ struct user_fp_state { }; struct user_watch_state { - uint16_t dbg_info; + uint64_t dbg_info; struct { uint64_t addr; uint64_t mask; uint32_t ctrl; + uint32_t pad; } dbg_regs[8]; }; diff --git a/arch/loongarch/kernel/cpu-probe.c b/arch/loongarch/kernel/cpu-probe.c index 3a3fce2d7846..5adf0f736c6d 100644 --- a/arch/loongarch/kernel/cpu-probe.c +++ b/arch/loongarch/kernel/cpu-probe.c @@ -60,7 +60,7 @@ static inline void set_elf_platform(int cpu, const char *plat) /* MAP BASE */ unsigned long vm_map_base; -EXPORT_SYMBOL_GPL(vm_map_base); +EXPORT_SYMBOL(vm_map_base); static void cpu_probe_addrbits(struct cpuinfo_loongarch *c) { @@ -94,13 +94,18 @@ static void cpu_probe_common(struct cpuinfo_loongarch *c) c->options = LOONGARCH_CPU_CPUCFG | LOONGARCH_CPU_CSR | LOONGARCH_CPU_TLB | LOONGARCH_CPU_VINT | LOONGARCH_CPU_WATCH; - elf_hwcap = HWCAP_LOONGARCH_CPUCFG | HWCAP_LOONGARCH_CRC32; + elf_hwcap = HWCAP_LOONGARCH_CPUCFG; config = read_cpucfg(LOONGARCH_CPUCFG1); if (config & CPUCFG1_UAL) { c->options |= LOONGARCH_CPU_UAL; elf_hwcap |= HWCAP_LOONGARCH_UAL; } + if (config & CPUCFG1_CRC32) { + c->options |= LOONGARCH_CPU_CRC32; + elf_hwcap |= HWCAP_LOONGARCH_CRC32; + } + config = read_cpucfg(LOONGARCH_CPUCFG2); if (config & CPUCFG2_LAM) { diff --git a/arch/loongarch/kernel/proc.c b/arch/loongarch/kernel/proc.c index 5c67cc4fd56d..0d82907b5404 100644 --- a/arch/loongarch/kernel/proc.c +++ b/arch/loongarch/kernel/proc.c @@ -76,6 +76,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (cpu_has_fpu) seq_printf(m, " fpu"); if (cpu_has_lsx) seq_printf(m, " lsx"); if (cpu_has_lasx) seq_printf(m, " lasx"); + if (cpu_has_crc32) seq_printf(m, " crc32"); if (cpu_has_complex) seq_printf(m, " complex"); if (cpu_has_crypto) seq_printf(m, " crypto"); if (cpu_has_lvz) seq_printf(m, " lvz"); diff --git a/arch/loongarch/kernel/ptrace.c b/arch/loongarch/kernel/ptrace.c index 06bceae7d104..5fcffb452367 100644 --- a/arch/loongarch/kernel/ptrace.c +++ b/arch/loongarch/kernel/ptrace.c @@ -391,10 +391,10 @@ static int ptrace_hbp_fill_attr_ctrl(unsigned int note_type, return 0; } -static int ptrace_hbp_get_resource_info(unsigned int note_type, u16 *info) +static int ptrace_hbp_get_resource_info(unsigned int note_type, u64 *info) { u8 num; - u16 reg = 0; + u64 reg = 0; switch (note_type) { case NT_LOONGARCH_HW_BREAK: @@ -524,15 +524,16 @@ static int ptrace_hbp_set_addr(unsigned int note_type, return modify_user_hw_breakpoint(bp, &attr); } -#define PTRACE_HBP_CTRL_SZ sizeof(u32) #define PTRACE_HBP_ADDR_SZ sizeof(u64) #define PTRACE_HBP_MASK_SZ sizeof(u64) +#define PTRACE_HBP_CTRL_SZ sizeof(u32) +#define PTRACE_HBP_PAD_SZ sizeof(u32) static int hw_break_get(struct task_struct *target, const struct user_regset *regset, struct membuf to) { - u16 info; + u64 info; u32 ctrl; u64 addr, mask; int ret, idx = 0; @@ -545,7 +546,7 @@ static int hw_break_get(struct task_struct *target, membuf_write(&to, &info, sizeof(info)); - /* (address, ctrl) registers */ + /* (address, mask, ctrl) registers */ while (to.left) { ret = ptrace_hbp_get_addr(note_type, target, idx, &addr); if (ret) @@ -562,6 +563,7 @@ static int hw_break_get(struct task_struct *target, membuf_store(&to, addr); membuf_store(&to, mask); membuf_store(&to, ctrl); + membuf_zero(&to, sizeof(u32)); idx++; } @@ -582,7 +584,7 @@ static int hw_break_set(struct task_struct *target, offset = offsetof(struct user_watch_state, dbg_regs); user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, offset); - /* (address, ctrl) registers */ + /* (address, mask, ctrl) registers */ limit = regset->n * regset->size; while (count && offset < limit) { if (count < PTRACE_HBP_ADDR_SZ) @@ -602,7 +604,7 @@ static int hw_break_set(struct task_struct *target, break; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &mask, - offset, offset + PTRACE_HBP_ADDR_SZ); + offset, offset + PTRACE_HBP_MASK_SZ); if (ret) return ret; @@ -611,8 +613,8 @@ static int hw_break_set(struct task_struct *target, return ret; offset += PTRACE_HBP_MASK_SZ; - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &mask, - offset, offset + PTRACE_HBP_MASK_SZ); + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ctrl, + offset, offset + PTRACE_HBP_CTRL_SZ); if (ret) return ret; @@ -620,6 +622,11 @@ static int hw_break_set(struct task_struct *target, if (ret) return ret; offset += PTRACE_HBP_CTRL_SZ; + + user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + offset, offset + PTRACE_HBP_PAD_SZ); + offset += PTRACE_HBP_PAD_SZ; + idx++; } diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c index bae84ccf6d36..4444b13418f0 100644 --- a/arch/loongarch/kernel/setup.c +++ b/arch/loongarch/kernel/setup.c @@ -160,6 +160,27 @@ static void __init smbios_parse(void) dmi_walk(find_tokens, NULL); } +#ifdef CONFIG_ARCH_WRITECOMBINE +pgprot_t pgprot_wc = PAGE_KERNEL_WUC; +#else +pgprot_t pgprot_wc = PAGE_KERNEL_SUC; +#endif + +EXPORT_SYMBOL(pgprot_wc); + +static int __init setup_writecombine(char *p) +{ + if (!strcmp(p, "on")) + pgprot_wc = PAGE_KERNEL_WUC; + else if (!strcmp(p, "off")) + pgprot_wc = PAGE_KERNEL_SUC; + else + pr_warn("Unknown writecombine setting \"%s\".\n", p); + + return 0; +} +early_param("writecombine", setup_writecombine); + static int usermem __initdata; static int __init early_parse_mem(char *p) @@ -368,8 +389,8 @@ static void __init arch_mem_init(char **cmdline_p) /* * In order to reduce the possibility of kernel panic when failed to * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate - * low memory as small as possible before plat_swiotlb_setup(), so - * make sparse_init() using top-down allocation. + * low memory as small as possible before swiotlb_init(), so make + * sparse_init() using top-down allocation. */ memblock_set_bottom_up(false); sparse_init(); diff --git a/arch/loongarch/kernel/stacktrace.c b/arch/loongarch/kernel/stacktrace.c index 3a690f96f00c..2463d2fea21f 100644 --- a/arch/loongarch/kernel/stacktrace.c +++ b/arch/loongarch/kernel/stacktrace.c @@ -30,7 +30,7 @@ void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie, regs->regs[1] = 0; for (unwind_start(&state, task, regs); - !unwind_done(&state); unwind_next_frame(&state)) { + !unwind_done(&state) && !unwind_error(&state); unwind_next_frame(&state)) { addr = unwind_get_return_address(&state); if (!addr || !consume_entry(cookie, addr)) break; diff --git a/arch/loongarch/kernel/unwind.c b/arch/loongarch/kernel/unwind.c index a463d6961344..ba324ba76fa1 100644 --- a/arch/loongarch/kernel/unwind.c +++ b/arch/loongarch/kernel/unwind.c @@ -28,5 +28,6 @@ bool default_next_frame(struct unwind_state *state) } while (!get_stack_info(state->sp, state->task, info)); + state->error = true; return false; } diff --git a/arch/loongarch/kernel/unwind_prologue.c b/arch/loongarch/kernel/unwind_prologue.c index 9095fde8e55d..55afc27320e1 100644 --- a/arch/loongarch/kernel/unwind_prologue.c +++ b/arch/loongarch/kernel/unwind_prologue.c @@ -211,7 +211,7 @@ static bool next_frame(struct unwind_state *state) pc = regs->csr_era; if (user_mode(regs) || !__kernel_text_address(pc)) - return false; + goto out; state->first = true; state->pc = pc; @@ -226,6 +226,8 @@ static bool next_frame(struct unwind_state *state) } while (!get_stack_info(state->sp, state->task, info)); +out: + state->error = true; return false; } diff --git a/arch/loongarch/mm/init.c b/arch/loongarch/mm/init.c index e018aed34586..3b7d8129570b 100644 --- a/arch/loongarch/mm/init.c +++ b/arch/loongarch/mm/init.c @@ -41,7 +41,7 @@ * don't have to care about aliases on other CPUs. */ unsigned long empty_zero_page, zero_page_mask; -EXPORT_SYMBOL_GPL(empty_zero_page); +EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(zero_page_mask); void setup_zero_pages(void) @@ -270,7 +270,7 @@ pud_t invalid_pud_table[PTRS_PER_PUD] __page_aligned_bss; #endif #ifndef __PAGETABLE_PMD_FOLDED pmd_t invalid_pmd_table[PTRS_PER_PMD] __page_aligned_bss; -EXPORT_SYMBOL_GPL(invalid_pmd_table); +EXPORT_SYMBOL(invalid_pmd_table); #endif pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned_bss; EXPORT_SYMBOL(invalid_pte_table); diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c index 288003a9f0ca..db9342b2d0e6 100644 --- a/arch/loongarch/net/bpf_jit.c +++ b/arch/loongarch/net/bpf_jit.c @@ -1022,6 +1022,10 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext emit_atomic(insn, ctx); break; + /* Speculation barrier */ + case BPF_ST | BPF_NOSPEC: + break; + default: pr_err("bpf_jit: unknown opcode %02x\n", code); return -EINVAL; @@ -1248,3 +1252,9 @@ out: return prog; } + +/* Indicate the JIT backend supports mixing bpf2bpf and tailcalls. */ +bool bpf_jit_supports_subprog_tailcalls(void) +{ + return true; +} diff --git a/arch/loongarch/power/suspend_asm.S b/arch/loongarch/power/suspend_asm.S index 90da899c06a1..e2fc3b4e31f0 100644 --- a/arch/loongarch/power/suspend_asm.S +++ b/arch/loongarch/power/suspend_asm.S @@ -80,6 +80,10 @@ SYM_INNER_LABEL(loongarch_wakeup_start, SYM_L_GLOBAL) JUMP_VIRT_ADDR t0, t1 + /* Enable PG */ + li.w t0, 0xb0 # PLV=0, IE=0, PG=1 + csrwr t0, LOONGARCH_CSR_CRMD + la.pcrel t0, acpi_saved_sp ld.d sp, t0, 0 SETUP_WAKEUP diff --git a/arch/loongarch/vdso/Makefile b/arch/loongarch/vdso/Makefile index d89e2ac75f7b..461240ab4436 100644 --- a/arch/loongarch/vdso/Makefile +++ b/arch/loongarch/vdso/Makefile @@ -1,9 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Objects to go into the VDSO. -# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before -# the inclusion of generic Makefile. -ARCH_REL_TYPE_ABS := R_LARCH_32|R_LARCH_64|R_LARCH_MARK_LA|R_LARCH_JUMP_SLOT +# Include the generic Makefile to check the built vdso. include $(srctree)/lib/vdso/Makefile obj-vdso-y := elf.o vgetcpu.o vgettimeofday.o sigreturn.o diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 82154952e574..40198a1ebe27 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -18,6 +18,7 @@ config M68K select GENERIC_CPU_DEVICES select GENERIC_IOMAP select GENERIC_IRQ_SHOW + select HAS_IOPORT if PCI || ISA || ATARI_ROM_ISA select HAVE_ARCH_SECCOMP select HAVE_ARCH_SECCOMP_FILTER select HAVE_ASM_MODVERSIONS diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 9380f6e3bb66..96a0fb4f1af5 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -24,7 +24,6 @@ config M68KCLASSIC config COLDFIRE bool "Coldfire CPU family support" - select ARCH_HAVE_CUSTOM_GPIO_H select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_CAS select CPU_HAS_NO_MULDIV64 diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug index 465e28be0ce4..30638a6e8edc 100644 --- a/arch/m68k/Kconfig.debug +++ b/arch/m68k/Kconfig.debug @@ -36,11 +36,6 @@ config HIGHPROFILE help Use a fast secondary clock to produce profiling information. -config NO_KERNEL_MSG - bool "Suppress Kernel BUG Messages" - help - Do not output any debug BUG messages within the kernel. - config BDM_DISABLE bool "Disable BDM signals" depends on COLDFIRE diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine index e2f961208f18..28eebabfd34b 100644 --- a/arch/m68k/Kconfig.machine +++ b/arch/m68k/Kconfig.machine @@ -11,7 +11,7 @@ config AMIGA help This option enables support for the Amiga series of computers. If you plan to use this kernel on an Amiga, say Y here and browse the - material available in <file:Documentation/m68k>; otherwise say N. + material available in <file:Documentation/arch/m68k>; otherwise say N. config ATARI bool "Atari support" @@ -23,7 +23,7 @@ config ATARI This option enables support for the 68000-based Atari series of computers (including the TT, Falcon and Medusa). If you plan to use this kernel on an Atari, say Y here and browse the material - available in <file:Documentation/m68k>; otherwise say N. + available in <file:Documentation/arch/m68k>; otherwise say N. config ATARI_KBD_CORE bool diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index ec2d792015a4..b26469a65bc1 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -214,7 +214,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -495,6 +494,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -621,6 +621,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 061a07824dc2..944a49a129be 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -210,7 +210,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -452,6 +451,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -577,6 +577,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 02af5f501dae..a32dd884fcce 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -217,7 +217,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -472,6 +471,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -598,6 +598,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 0d5832cb3e10..23b7805309bd 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -207,7 +207,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -444,6 +443,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -569,6 +569,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index c246c3538839..5605ab5c3dcf 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -209,7 +209,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -454,6 +453,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -579,6 +579,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 98d2d0599e5a..d0d1f9c33756 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -208,7 +208,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -474,6 +473,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -600,6 +600,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index b2d5ec6ba625..6d04314ce7ea 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -228,7 +228,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -314,7 +313,6 @@ CONFIG_AF_KCM=m # CONFIG_WIRELESS is not set CONFIG_PSAMPLE=m CONFIG_NET_IFE=m -CONFIG_PCCARD=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_TEST_ASYNC_DRIVER_PROBE=m @@ -561,6 +559,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -687,6 +686,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index d3420c642992..e6f5ae526d08 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -206,7 +206,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -443,6 +442,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -568,6 +568,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index e294b0b67695..f2d4dff4787a 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -207,7 +207,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -444,6 +443,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -569,6 +569,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 764a94b08936..907eedecd040 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -208,7 +208,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -461,6 +460,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -587,6 +587,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index d4eeddac6bb8..9e3d47008f21 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -204,7 +204,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -443,6 +442,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -567,6 +567,7 @@ CONFIG_TEST_LOCKUP=m CONFIG_WW_MUTEX_SELFTEST=m CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index ca359b880683..f6540078cb4b 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -204,7 +204,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -442,6 +441,7 @@ CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_RPCSEC_GSS_KRB5=m CONFIG_CIFS=m # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_DEBUG is not set @@ -567,6 +567,7 @@ CONFIG_WW_MUTEX_SELFTEST=m CONFIG_EARLY_PRINTK=y CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m +CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m CONFIG_TEST_DIV64=m CONFIG_REED_SOLOMON_TEST=m diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h deleted file mode 100644 index 5cfc0996ba94..000000000000 --- a/arch/m68k/include/asm/gpio.h +++ /dev/null @@ -1,95 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Coldfire generic GPIO support - * - * (C) Copyright 2009, Steven King <sfking@fdwdc.com> -*/ - -#ifndef coldfire_gpio_h -#define coldfire_gpio_h - -#include <linux/io.h> -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfgpio.h> -/* - * The Generic GPIO functions - * - * If the gpio is a compile time constant and is one of the Coldfire gpios, - * use the inline version, otherwise dispatch thru gpiolib. - */ - -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) - return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) { - if (gpio < MCFGPIO_SCR_START) { - unsigned long flags; - MCFGPIO_PORTTYPE data; - - local_irq_save(flags); - data = mcfgpio_read(__mcfgpio_podr(gpio)); - if (value) - data |= mcfgpio_bit(gpio); - else - data &= ~mcfgpio_bit(gpio); - mcfgpio_write(data, __mcfgpio_podr(gpio)); - local_irq_restore(flags); - } else { - if (value) - mcfgpio_write(mcfgpio_bit(gpio), - MCFGPIO_SETR_PORT(gpio)); - else - mcfgpio_write(~mcfgpio_bit(gpio), - MCFGPIO_CLRR_PORT(gpio)); - } - } else - __gpio_set_value(gpio, value); -} - -static inline int gpio_to_irq(unsigned gpio) -{ -#if defined(MCFGPIO_IRQ_MIN) - if ((gpio >= MCFGPIO_IRQ_MIN) && (gpio < MCFGPIO_IRQ_MAX)) -#else - if (gpio < MCFGPIO_IRQ_MAX) -#endif - return gpio + MCFGPIO_IRQ_VECBASE; - else - return __gpio_to_irq(gpio); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio); -} - -#ifndef CONFIG_GPIOLIB -static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) -{ - int err; - - err = gpio_request(gpio, label); - if (err) - return err; - - if (flags & GPIOF_DIR_IN) - err = gpio_direction_input(gpio); - else - err = gpio_direction_output(gpio, - (flags & GPIOF_INIT_HIGH) ? 1 : 0); - - if (err) - gpio_free(gpio); - - return err; -} -#endif /* !CONFIG_GPIOLIB */ -#endif diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h index 27f32cc81da6..2cefe8445980 100644 --- a/arch/m68k/include/asm/mcfgpio.h +++ b/arch/m68k/include/asm/mcfgpio.h @@ -9,7 +9,7 @@ #define mcfgpio_h #ifdef CONFIG_GPIOLIB -#include <asm-generic/gpio.h> +#include <linux/gpio.h> #else int __mcfgpio_get_value(unsigned gpio); diff --git a/arch/m68k/kernel/machine_kexec.c b/arch/m68k/kernel/machine_kexec.c index 206f84983120..739875540e89 100644 --- a/arch/m68k/kernel/machine_kexec.c +++ b/arch/m68k/kernel/machine_kexec.c @@ -6,6 +6,7 @@ #include <linux/kexec.h> #include <linux/mm.h> #include <linux/delay.h> +#include <linux/reboot.h> #include <asm/cacheflush.h> #include <asm/page.h> diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c index 3a2bb2e8fdad..fbff1cea62ca 100644 --- a/arch/m68k/kernel/setup_mm.c +++ b/arch/m68k/kernel/setup_mm.c @@ -326,16 +326,16 @@ void __init setup_arch(char **cmdline_p) panic("No configuration setup"); } -#ifdef CONFIG_BLK_DEV_INITRD - if (m68k_ramdisk.size) { + if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && m68k_ramdisk.size) memblock_reserve(m68k_ramdisk.addr, m68k_ramdisk.size); + + paging_init(); + + if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && m68k_ramdisk.size) { initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr); initrd_end = initrd_start + m68k_ramdisk.size; pr_info("initrd: %08lx - %08lx\n", initrd_start, initrd_end); } -#endif - - paging_init(); #ifdef CONFIG_NATFEAT nf_init(); diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 5c8cba0efc63..a700807c9b6d 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <linux/ptrace.h> #include <linux/kallsyms.h> +#include <linux/extable.h> #include <asm/setup.h> #include <asm/fpu.h> @@ -545,7 +546,8 @@ static inline void bus_error030 (struct frame *fp) errorcode |= 2; if (mmusr & (MMU_I | MMU_WP)) { - if (ssw & 4) { + /* We might have an exception table for this PC */ + if (ssw & 4 && !search_exception_tables(fp->ptregs.pc)) { pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n", ssw & RW ? "read" : "write", fp->un.fmtb.daddr, diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c index 2a375637e007..911301224078 100644 --- a/arch/m68k/mm/motorola.c +++ b/arch/m68k/mm/motorola.c @@ -437,7 +437,7 @@ void __init paging_init(void) } min_addr = m68k_memory[0].addr; - max_addr = min_addr + m68k_memory[0].size; + max_addr = min_addr + m68k_memory[0].size - 1; memblock_add_node(m68k_memory[0].addr, m68k_memory[0].size, 0, MEMBLOCK_NONE); for (i = 1; i < m68k_num_memory;) { @@ -452,21 +452,21 @@ void __init paging_init(void) } memblock_add_node(m68k_memory[i].addr, m68k_memory[i].size, i, MEMBLOCK_NONE); - addr = m68k_memory[i].addr + m68k_memory[i].size; + addr = m68k_memory[i].addr + m68k_memory[i].size - 1; if (addr > max_addr) max_addr = addr; i++; } m68k_memoffset = min_addr - PAGE_OFFSET; - m68k_virt_to_node_shift = fls(max_addr - min_addr - 1) - 6; + m68k_virt_to_node_shift = fls(max_addr - min_addr) - 6; module_fixup(NULL, __start_fixup, __stop_fixup); flush_icache(); - high_memory = phys_to_virt(max_addr); + high_memory = phys_to_virt(max_addr) + 1; min_low_pfn = availmem >> PAGE_SHIFT; - max_pfn = max_low_pfn = max_addr >> PAGE_SHIFT; + max_pfn = max_low_pfn = (max_addr >> PAGE_SHIFT) + 1; /* Reserve kernel text/data/bss and the memory allocated in head.S */ memblock_reserve(m68k_memory[0].addr, availmem - m68k_memory[0].addr); diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index cc88af6fa7a4..211f338d6235 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -21,6 +21,7 @@ config MICROBLAZE select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP select GENERIC_SCHED_CLOCK + select HAS_IOPORT if PCI select HAVE_ARCH_HASH select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e2f3ca73f40d..916af9cbac65 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -47,6 +47,7 @@ config MIPS select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL select GUP_GET_PXX_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT + select HAS_IOPORT if !NO_IOPORT_MAP || ISA select HAVE_ARCH_COMPILER_H select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_KGDB if MIPS_FP_SUPPORT @@ -63,10 +64,7 @@ config MIPS select HAVE_DEBUG_STACKOVERFLOW select HAVE_DMA_CONTIGUOUS select HAVE_DYNAMIC_FTRACE - select HAVE_EBPF_JIT if !CPU_MICROMIPS && \ - !CPU_DADDI_WORKAROUNDS && \ - !CPU_R4000_WORKAROUNDS && \ - !CPU_R4400_WORKAROUNDS + select HAVE_EBPF_JIT if !CPU_MICROMIPS select HAVE_EXIT_THREAD select HAVE_FAST_GUP select HAVE_FTRACE_MCOUNT_RECORD diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c index ae0e01b9438f..4ed833b9cc2f 100644 --- a/arch/mips/ar7/gpio.c +++ b/arch/mips/ar7/gpio.c @@ -7,7 +7,7 @@ #include <linux/init.h> #include <linux/export.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <asm/mach-ar7/ar7.h> diff --git a/arch/mips/bmips/dma.c b/arch/mips/bmips/dma.c index 33788668cbdb..3779e7855bd7 100644 --- a/arch/mips/bmips/dma.c +++ b/arch/mips/bmips/dma.c @@ -5,6 +5,8 @@ #include <asm/bmips.h> #include <asm/io.h> +bool bmips_rac_flush_disable; + void arch_sync_dma_for_cpu_all(void) { void __iomem *cbr = BMIPS_GET_CBR(); @@ -15,6 +17,9 @@ void arch_sync_dma_for_cpu_all(void) boot_cpu_type() != CPU_BMIPS4380) return; + if (unlikely(bmips_rac_flush_disable)) + return; + /* Flush stale data out of the readahead cache */ cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG); diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c index e95b3f78e7cd..549a6392a3d2 100644 --- a/arch/mips/bmips/setup.c +++ b/arch/mips/bmips/setup.c @@ -35,6 +35,8 @@ #define REG_BCM6328_OTP ((void __iomem *)CKSEG1ADDR(0x1000062c)) #define BCM6328_TP1_DISABLED BIT(9) +extern bool bmips_rac_flush_disable; + static const unsigned long kbase = VMLINUX_LOAD_ADDRESS & 0xfff00000; struct bmips_quirk { @@ -104,6 +106,12 @@ static void bcm6358_quirks(void) * disable SMP for now */ bmips_smp_enabled = 0; + + /* + * RAC flush causes kernel panics on BCM6358 when booting from TP1 + * because the bootloader is not initializing it properly. + */ + bmips_rac_flush_disable = !!(read_c0_brcm_cmt_local() & (1 << 31)); } static void bcm6368_quirks(void) diff --git a/arch/mips/configs/loongson2k_defconfig b/arch/mips/configs/loongson2k_defconfig index 728bef666f7a..0ab029ecad21 100644 --- a/arch/mips/configs/loongson2k_defconfig +++ b/arch/mips/configs/loongson2k_defconfig @@ -154,7 +154,6 @@ CONFIG_TUN=m CONFIG_E1000=y CONFIG_E1000E=y CONFIG_IGB=y -CONFIG_IXGB=y CONFIG_IXGBE=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index aca66a5f330d..6f4a52608ea4 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -207,7 +207,6 @@ CONFIG_VIRTIO_NET=m CONFIG_E1000=y CONFIG_E1000E=y CONFIG_IGB=y -CONFIG_IXGB=y CONFIG_IXGBE=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 89a1511d2ee4..e1b66aac7025 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -280,10 +280,10 @@ CONFIG_SUNDANCE=m CONFIG_PCMCIA_FMVJ18X=m CONFIG_E100=m CONFIG_E1000=m -CONFIG_IXGB=m CONFIG_SKGE=m CONFIG_SKY2=m CONFIG_MYRI10GE=m +CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NS83820=m CONFIG_S2IO=m diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 52cbde60edf5..9ff55cb80a64 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -15,6 +15,8 @@ #define EMITS_PT_NOTE #endif +#define RUNTIME_DISCARD_EXIT + #include <asm-generic/vmlinux.lds.h> #undef mips diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig index 29e51649203b..a8cdba75f98d 100644 --- a/arch/mips/kvm/Kconfig +++ b/arch/mips/kvm/Kconfig @@ -26,7 +26,6 @@ config KVM select HAVE_KVM_VCPU_ASYNC_IOCTL select KVM_MMIO select MMU_NOTIFIER - select SRCU select INTERVAL_TREE select KVM_GENERIC_HARDWARE_ENABLING help diff --git a/arch/mips/net/bpf_jit_comp.c b/arch/mips/net/bpf_jit_comp.c index b17130d510d4..a40d926b6513 100644 --- a/arch/mips/net/bpf_jit_comp.c +++ b/arch/mips/net/bpf_jit_comp.c @@ -218,9 +218,13 @@ bool valid_alu_i(u8 op, s32 imm) /* All legal eBPF values are valid */ return true; case BPF_ADD: + if (IS_ENABLED(CONFIG_CPU_DADDI_WORKAROUNDS)) + return false; /* imm must be 16 bits */ return imm >= -0x8000 && imm <= 0x7fff; case BPF_SUB: + if (IS_ENABLED(CONFIG_CPU_DADDI_WORKAROUNDS)) + return false; /* -imm must be 16 bits */ return imm >= -0x7fff && imm <= 0x8000; case BPF_AND: diff --git a/arch/mips/net/bpf_jit_comp64.c b/arch/mips/net/bpf_jit_comp64.c index 0e7c1bdcf914..fa7e9aa37f49 100644 --- a/arch/mips/net/bpf_jit_comp64.c +++ b/arch/mips/net/bpf_jit_comp64.c @@ -228,6 +228,9 @@ static void emit_alu_r64(struct jit_context *ctx, u8 dst, u8 src, u8 op) } else { emit(ctx, dmultu, dst, src); emit(ctx, mflo, dst); + /* Ensure multiplication is completed */ + if (IS_ENABLED(CONFIG_CPU_R4000_WORKAROUNDS)) + emit(ctx, mfhi, MIPS_R_ZERO); } break; /* dst = dst / src */ diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile index 18af9474ed0e..eb56581f6d73 100644 --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile @@ -4,9 +4,7 @@ # Sanitizer runtimes are unavailable and cannot be linked here. KCSAN_SANITIZE := n -# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before -# the inclusion of generic Makefile. -ARCH_REL_TYPE_ABS := R_MIPS_JUMP_SLOT|R_MIPS_GLOB_DAT +# Include the generic Makefile to check the built vdso. include $(srctree)/lib/vdso/Makefile obj-vdso-y := elf.o vgettimeofday.o sigreturn.o diff --git a/arch/nios2/include/asm/thread_info.h b/arch/nios2/include/asm/thread_info.h index bcc0e9915ebd..5abac9893b32 100644 --- a/arch/nios2/include/asm/thread_info.h +++ b/arch/nios2/include/asm/thread_info.h @@ -96,9 +96,6 @@ static inline struct thread_info *current_thread_info(void) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK 0x0000FFFE -/* work to do on any return to u-space */ -# define _TIF_ALLWORK_MASK 0x0000FFFF - #endif /* __KERNEL__ */ #endif /* _ASM_NIOS2_THREAD_INFO_H */ diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index a98940e64243..466a25525364 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -47,6 +47,7 @@ config PARISC select MODULES_USE_ELF_RELA select CLONE_BACKWARDS select TTY # Needed for pdc_cons.c + select HAS_IOPORT if PCI || EISA select HAVE_DEBUG_STACKOVERFLOW select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_HASH diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a6c4407d3ec8..02fd9bcd9215 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -188,6 +188,7 @@ config PPC select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL select GENERIC_VDSO_TIME_NS + select HAS_IOPORT if PCI select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP select HAVE_ARCH_HUGE_VMAP if PPC_RADIX_MMU || PPC_8xx diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts index 73f8c998c64d..d4f5f159d6f2 100644 --- a/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts +++ b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts @@ -10,7 +10,6 @@ / { model = "fsl,T1040RDB-REV-A"; - compatible = "fsl,T1040RDB-REV-A"; }; &seville_port0 { diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts index b6733e7e6580..dd3aab81e9de 100644 --- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts @@ -180,6 +180,9 @@ }; &seville_port8 { - ethernet = <&enet0>; + status = "okay"; +}; + +&seville_port9 { status = "okay"; }; diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index f58eb820eb5e..ad0ab33336b8 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -686,6 +686,7 @@ seville_port8: port@8 { reg = <8>; phy-mode = "internal"; + ethernet = <&enet0>; status = "disabled"; fixed-link { @@ -697,6 +698,7 @@ seville_port9: port@9 { reg = <9>; phy-mode = "internal"; + ethernet = <&enet1>; status = "disabled"; fixed-link { diff --git a/arch/powerpc/configs/microwatt_defconfig b/arch/powerpc/configs/microwatt_defconfig index 18d4fe4108cb..795a127908e7 100644 --- a/arch/powerpc/configs/microwatt_defconfig +++ b/arch/powerpc/configs/microwatt_defconfig @@ -4,7 +4,6 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_LOG_BUF_SHIFT=16 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12 CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig index c92652575064..f2a9be02a8d2 100644 --- a/arch/powerpc/configs/powernv_defconfig +++ b/arch/powerpc/configs/powernv_defconfig @@ -170,7 +170,6 @@ CONFIG_S2IO=m CONFIG_E100=y CONFIG_E1000=y CONFIG_E1000E=y -CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_I40E=m CONFIG_MLX4_EN=m diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index d6949a6c5b2b..6c46e5560d96 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -182,7 +182,6 @@ CONFIG_IBMVNIC=m CONFIG_E100=y CONFIG_E1000=y CONFIG_E1000E=y -CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_I40E=m CONFIG_MLX4_EN=m diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig index f97a2d31bbf7..776c32964e12 100644 --- a/arch/powerpc/configs/ppc64e_defconfig +++ b/arch/powerpc/configs/ppc64e_defconfig @@ -102,7 +102,6 @@ CONFIG_PCNET32=y CONFIG_TIGON3=y CONFIG_E100=y CONFIG_E1000=y -CONFIG_IXGB=m CONFIG_SUNGEM=y CONFIG_BROADCOM_PHY=m CONFIG_MARVELL_PHY=y diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 110258277959..5927b2312936 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -455,12 +455,12 @@ CONFIG_E100=m CONFIG_E1000=m CONFIG_E1000E=m CONFIG_IGB=m -CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_MV643XX_ETH=m CONFIG_SKGE=m CONFIG_SKY2=m CONFIG_MYRI10GE=m +CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NS83820=m CONFIG_PCMCIA_AXNET=m diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 7497e17ea657..49b3ff4e3b18 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -164,7 +164,6 @@ CONFIG_IBMVNIC=y CONFIG_E100=y CONFIG_E1000=y CONFIG_E1000E=y -CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_I40E=m CONFIG_MLX4_EN=m diff --git a/arch/powerpc/configs/skiroot_defconfig b/arch/powerpc/configs/skiroot_defconfig index e0964210f259..71cfb990a74f 100644 --- a/arch/powerpc/configs/skiroot_defconfig +++ b/arch/powerpc/configs/skiroot_defconfig @@ -149,7 +149,6 @@ CONFIG_BE2NET=m CONFIG_E1000=m CONFIG_E1000E=m CONFIG_IGB=m -CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_I40E=m # CONFIG_NET_VENDOR_MARVELL is not set diff --git a/arch/powerpc/crypto/Kconfig b/arch/powerpc/crypto/Kconfig index c1b964447401..7113f9355165 100644 --- a/arch/powerpc/crypto/Kconfig +++ b/arch/powerpc/crypto/Kconfig @@ -94,4 +94,21 @@ config CRYPTO_AES_PPC_SPE architecture specific assembler implementations that work on 1KB tables or 256 bytes S-boxes. +config CRYPTO_AES_GCM_P10 + tristate "Stitched AES/GCM acceleration support on P10 or later CPU (PPC)" + depends on PPC64 && CPU_LITTLE_ENDIAN + select CRYPTO_LIB_AES + select CRYPTO_ALGAPI + select CRYPTO_AEAD + default m + help + AEAD cipher: AES cipher algorithms (FIPS-197) + GCM (Galois/Counter Mode) authenticated encryption mode (NIST SP800-38D) + Architecture: powerpc64 using: + - little-endian + - Power10 or later features + + Support for cryptographic acceleration instructions on Power10 or + later CPU. This module supports stitched acceleration for AES/GCM. + endmenu diff --git a/arch/powerpc/crypto/Makefile b/arch/powerpc/crypto/Makefile index 4808d97fede5..05c7486f42c5 100644 --- a/arch/powerpc/crypto/Makefile +++ b/arch/powerpc/crypto/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_CRYPTO_SHA256_PPC_SPE) += sha256-ppc-spe.o obj-$(CONFIG_CRYPTO_CRC32C_VPMSUM) += crc32c-vpmsum.o obj-$(CONFIG_CRYPTO_CRCT10DIF_VPMSUM) += crct10dif-vpmsum.o obj-$(CONFIG_CRYPTO_VPMSUM_TESTER) += crc-vpmsum_test.o +obj-$(CONFIG_CRYPTO_AES_GCM_P10) += aes-gcm-p10-crypto.o aes-ppc-spe-y := aes-spe-core.o aes-spe-keys.o aes-tab-4k.o aes-spe-modes.o aes-spe-glue.o md5-ppc-y := md5-asm.o md5-glue.o @@ -21,3 +22,15 @@ sha1-ppc-spe-y := sha1-spe-asm.o sha1-spe-glue.o sha256-ppc-spe-y := sha256-spe-asm.o sha256-spe-glue.o crc32c-vpmsum-y := crc32c-vpmsum_asm.o crc32c-vpmsum_glue.o crct10dif-vpmsum-y := crct10dif-vpmsum_asm.o crct10dif-vpmsum_glue.o +aes-gcm-p10-crypto-y := aes-gcm-p10-glue.o aes-gcm-p10.o ghashp8-ppc.o aesp8-ppc.o + +quiet_cmd_perl = PERL $@ + cmd_perl = $(PERL) $< $(if $(CONFIG_CPU_LITTLE_ENDIAN), linux-ppc64le, linux-ppc64) > $@ + +targets += aesp8-ppc.S ghashp8-ppc.S + +$(obj)/aesp8-ppc.S $(obj)/ghashp8-ppc.S: $(obj)/%.S: $(src)/%.pl FORCE + $(call if_changed,perl) + +OBJECT_FILES_NON_STANDARD_aesp8-ppc.o := y +OBJECT_FILES_NON_STANDARD_ghashp8-ppc.o := y diff --git a/arch/powerpc/crypto/aes-gcm-p10-glue.c b/arch/powerpc/crypto/aes-gcm-p10-glue.c new file mode 100644 index 000000000000..bd3475f5348d --- /dev/null +++ b/arch/powerpc/crypto/aes-gcm-p10-glue.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Glue code for accelerated AES-GCM stitched implementation for ppc64le. + * + * Copyright 2022- IBM Inc. All rights reserved + */ + +#include <asm/unaligned.h> +#include <asm/simd.h> +#include <asm/switch_to.h> +#include <crypto/aes.h> +#include <crypto/algapi.h> +#include <crypto/b128ops.h> +#include <crypto/gf128mul.h> +#include <crypto/internal/simd.h> +#include <crypto/internal/aead.h> +#include <crypto/internal/hash.h> +#include <crypto/internal/skcipher.h> +#include <crypto/scatterwalk.h> +#include <linux/cpufeature.h> +#include <linux/crypto.h> +#include <linux/module.h> +#include <linux/types.h> + +#define PPC_ALIGN 16 +#define GCM_IV_SIZE 12 + +MODULE_DESCRIPTION("PPC64le AES-GCM with Stitched implementation"); +MODULE_AUTHOR("Danny Tsen <dtsen@linux.ibm.com"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("aes"); + +asmlinkage int aes_p8_set_encrypt_key(const u8 *userKey, const int bits, + void *key); +asmlinkage void aes_p8_encrypt(const u8 *in, u8 *out, const void *key); +asmlinkage void aes_p10_gcm_encrypt(u8 *in, u8 *out, size_t len, + void *rkey, u8 *iv, void *Xi); +asmlinkage void aes_p10_gcm_decrypt(u8 *in, u8 *out, size_t len, + void *rkey, u8 *iv, void *Xi); +asmlinkage void gcm_init_htable(unsigned char htable[256], unsigned char Xi[16]); +asmlinkage void gcm_ghash_p8(unsigned char *Xi, unsigned char *Htable, + unsigned char *aad, unsigned int alen); + +struct aes_key { + u8 key[AES_MAX_KEYLENGTH]; + u64 rounds; +}; + +struct gcm_ctx { + u8 iv[16]; + u8 ivtag[16]; + u8 aad_hash[16]; + u64 aadLen; + u64 Plen; /* offset 56 - used in aes_p10_gcm_{en/de}crypt */ +}; +struct Hash_ctx { + u8 H[16]; /* subkey */ + u8 Htable[256]; /* Xi, Hash table(offset 32) */ +}; + +struct p10_aes_gcm_ctx { + struct aes_key enc_key; +}; + +static void vsx_begin(void) +{ + preempt_disable(); + enable_kernel_vsx(); +} + +static void vsx_end(void) +{ + disable_kernel_vsx(); + preempt_enable(); +} + +static void set_subkey(unsigned char *hash) +{ + *(u64 *)&hash[0] = be64_to_cpup((__be64 *)&hash[0]); + *(u64 *)&hash[8] = be64_to_cpup((__be64 *)&hash[8]); +} + +/* + * Compute aad if any. + * - Hash aad and copy to Xi. + */ +static void set_aad(struct gcm_ctx *gctx, struct Hash_ctx *hash, + unsigned char *aad, int alen) +{ + int i; + u8 nXi[16] = {0, }; + + gctx->aadLen = alen; + i = alen & ~0xf; + if (i) { + gcm_ghash_p8(nXi, hash->Htable+32, aad, i); + aad += i; + alen -= i; + } + if (alen) { + for (i = 0; i < alen; i++) + nXi[i] ^= aad[i]; + + memset(gctx->aad_hash, 0, 16); + gcm_ghash_p8(gctx->aad_hash, hash->Htable+32, nXi, 16); + } else { + memcpy(gctx->aad_hash, nXi, 16); + } + + memcpy(hash->Htable, gctx->aad_hash, 16); +} + +static void gcmp10_init(struct gcm_ctx *gctx, u8 *iv, unsigned char *rdkey, + struct Hash_ctx *hash, u8 *assoc, unsigned int assoclen) +{ + __be32 counter = cpu_to_be32(1); + + aes_p8_encrypt(hash->H, hash->H, rdkey); + set_subkey(hash->H); + gcm_init_htable(hash->Htable+32, hash->H); + + *((__be32 *)(iv+12)) = counter; + + gctx->Plen = 0; + + /* + * Encrypt counter vector as iv tag and increment counter. + */ + aes_p8_encrypt(iv, gctx->ivtag, rdkey); + + counter = cpu_to_be32(2); + *((__be32 *)(iv+12)) = counter; + memcpy(gctx->iv, iv, 16); + + gctx->aadLen = assoclen; + memset(gctx->aad_hash, 0, 16); + if (assoclen) + set_aad(gctx, hash, assoc, assoclen); +} + +static void finish_tag(struct gcm_ctx *gctx, struct Hash_ctx *hash, int len) +{ + int i; + unsigned char len_ac[16 + PPC_ALIGN]; + unsigned char *aclen = PTR_ALIGN((void *)len_ac, PPC_ALIGN); + __be64 clen = cpu_to_be64(len << 3); + __be64 alen = cpu_to_be64(gctx->aadLen << 3); + + if (len == 0 && gctx->aadLen == 0) { + memcpy(hash->Htable, gctx->ivtag, 16); + return; + } + + /* + * Len is in bits. + */ + *((__be64 *)(aclen)) = alen; + *((__be64 *)(aclen+8)) = clen; + + /* + * hash (AAD len and len) + */ + gcm_ghash_p8(hash->Htable, hash->Htable+32, aclen, 16); + + for (i = 0; i < 16; i++) + hash->Htable[i] ^= gctx->ivtag[i]; +} + +static int set_authsize(struct crypto_aead *tfm, unsigned int authsize) +{ + switch (authsize) { + case 4: + case 8: + case 12: + case 13: + case 14: + case 15: + case 16: + break; + default: + return -EINVAL; + } + + return 0; +} + +static int p10_aes_gcm_setkey(struct crypto_aead *aead, const u8 *key, + unsigned int keylen) +{ + struct crypto_tfm *tfm = crypto_aead_tfm(aead); + struct p10_aes_gcm_ctx *ctx = crypto_tfm_ctx(tfm); + int ret; + + vsx_begin(); + ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); + vsx_end(); + + return ret ? -EINVAL : 0; +} + +static int p10_aes_gcm_crypt(struct aead_request *req, int enc) +{ + struct crypto_tfm *tfm = req->base.tfm; + struct p10_aes_gcm_ctx *ctx = crypto_tfm_ctx(tfm); + u8 databuf[sizeof(struct gcm_ctx) + PPC_ALIGN]; + struct gcm_ctx *gctx = PTR_ALIGN((void *)databuf, PPC_ALIGN); + u8 hashbuf[sizeof(struct Hash_ctx) + PPC_ALIGN]; + struct Hash_ctx *hash = PTR_ALIGN((void *)hashbuf, PPC_ALIGN); + struct scatter_walk assoc_sg_walk; + struct skcipher_walk walk; + u8 *assocmem = NULL; + u8 *assoc; + unsigned int assoclen = req->assoclen; + unsigned int cryptlen = req->cryptlen; + unsigned char ivbuf[AES_BLOCK_SIZE+PPC_ALIGN]; + unsigned char *iv = PTR_ALIGN((void *)ivbuf, PPC_ALIGN); + int ret; + unsigned long auth_tag_len = crypto_aead_authsize(__crypto_aead_cast(tfm)); + u8 otag[16]; + int total_processed = 0; + + memset(databuf, 0, sizeof(databuf)); + memset(hashbuf, 0, sizeof(hashbuf)); + memset(ivbuf, 0, sizeof(ivbuf)); + memcpy(iv, req->iv, GCM_IV_SIZE); + + /* Linearize assoc, if not already linear */ + if (req->src->length >= assoclen && req->src->length) { + scatterwalk_start(&assoc_sg_walk, req->src); + assoc = scatterwalk_map(&assoc_sg_walk); + } else { + gfp_t flags = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? + GFP_KERNEL : GFP_ATOMIC; + + /* assoc can be any length, so must be on heap */ + assocmem = kmalloc(assoclen, flags); + if (unlikely(!assocmem)) + return -ENOMEM; + assoc = assocmem; + + scatterwalk_map_and_copy(assoc, req->src, 0, assoclen, 0); + } + + vsx_begin(); + gcmp10_init(gctx, iv, (unsigned char *) &ctx->enc_key, hash, assoc, assoclen); + vsx_end(); + + if (!assocmem) + scatterwalk_unmap(assoc); + else + kfree(assocmem); + + if (enc) + ret = skcipher_walk_aead_encrypt(&walk, req, false); + else + ret = skcipher_walk_aead_decrypt(&walk, req, false); + if (ret) + return ret; + + while (walk.nbytes > 0 && ret == 0) { + + vsx_begin(); + if (enc) + aes_p10_gcm_encrypt(walk.src.virt.addr, + walk.dst.virt.addr, + walk.nbytes, + &ctx->enc_key, gctx->iv, hash->Htable); + else + aes_p10_gcm_decrypt(walk.src.virt.addr, + walk.dst.virt.addr, + walk.nbytes, + &ctx->enc_key, gctx->iv, hash->Htable); + vsx_end(); + + total_processed += walk.nbytes; + ret = skcipher_walk_done(&walk, 0); + } + + if (ret) + return ret; + + /* Finalize hash */ + vsx_begin(); + finish_tag(gctx, hash, total_processed); + vsx_end(); + + /* copy Xi to end of dst */ + if (enc) + scatterwalk_map_and_copy(hash->Htable, req->dst, req->assoclen + cryptlen, + auth_tag_len, 1); + else { + scatterwalk_map_and_copy(otag, req->src, + req->assoclen + cryptlen - auth_tag_len, + auth_tag_len, 0); + + if (crypto_memneq(otag, hash->Htable, auth_tag_len)) { + memzero_explicit(hash->Htable, 16); + return -EBADMSG; + } + } + + return 0; +} + +static int p10_aes_gcm_encrypt(struct aead_request *req) +{ + return p10_aes_gcm_crypt(req, 1); +} + +static int p10_aes_gcm_decrypt(struct aead_request *req) +{ + return p10_aes_gcm_crypt(req, 0); +} + +static struct aead_alg gcm_aes_alg = { + .ivsize = GCM_IV_SIZE, + .maxauthsize = 16, + + .setauthsize = set_authsize, + .setkey = p10_aes_gcm_setkey, + .encrypt = p10_aes_gcm_encrypt, + .decrypt = p10_aes_gcm_decrypt, + + .base.cra_name = "gcm(aes)", + .base.cra_driver_name = "aes_gcm_p10", + .base.cra_priority = 2100, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct p10_aes_gcm_ctx), + .base.cra_module = THIS_MODULE, +}; + +static int __init p10_init(void) +{ + return crypto_register_aead(&gcm_aes_alg); +} + +static void __exit p10_exit(void) +{ + crypto_unregister_aead(&gcm_aes_alg); +} + +module_cpu_feature_match(PPC_MODULE_FEATURE_P10, p10_init); +module_exit(p10_exit); diff --git a/arch/powerpc/crypto/aes-gcm-p10.S b/arch/powerpc/crypto/aes-gcm-p10.S new file mode 100644 index 000000000000..a51f4b265308 --- /dev/null +++ b/arch/powerpc/crypto/aes-gcm-p10.S @@ -0,0 +1,1521 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + # + # Accelerated AES-GCM stitched implementation for ppc64le. + # + # Copyright 2022- IBM Inc. All rights reserved + # + #=================================================================================== + # Written by Danny Tsen <dtsen@linux.ibm.com> + # + # GHASH is based on the Karatsuba multiplication method. + # + # Xi xor X1 + # + # X1 * H^4 + X2 * H^3 + x3 * H^2 + X4 * H = + # (X1.h * H4.h + xX.l * H4.l + X1 * H4) + + # (X2.h * H3.h + X2.l * H3.l + X2 * H3) + + # (X3.h * H2.h + X3.l * H2.l + X3 * H2) + + # (X4.h * H.h + X4.l * H.l + X4 * H) + # + # Xi = v0 + # H Poly = v2 + # Hash keys = v3 - v14 + # ( H.l, H, H.h) + # ( H^2.l, H^2, H^2.h) + # ( H^3.l, H^3, H^3.h) + # ( H^4.l, H^4, H^4.h) + # + # v30 is IV + # v31 - counter 1 + # + # AES used, + # vs0 - vs14 for round keys + # v15, v16, v17, v18, v19, v20, v21, v22 for 8 blocks (encrypted) + # + # This implementation uses stitched AES-GCM approach to improve overall performance. + # AES is implemented with 8x blocks and GHASH is using 2 4x blocks. + # + # =================================================================================== + # + +#include <asm/ppc_asm.h> +#include <linux/linkage.h> + +.machine "any" +.text + + # 4x loops + # v15 - v18 - input states + # vs1 - vs9 - round keys + # +.macro Loop_aes_middle4x + xxlor 19+32, 1, 1 + xxlor 20+32, 2, 2 + xxlor 21+32, 3, 3 + xxlor 22+32, 4, 4 + + vcipher 15, 15, 19 + vcipher 16, 16, 19 + vcipher 17, 17, 19 + vcipher 18, 18, 19 + + vcipher 15, 15, 20 + vcipher 16, 16, 20 + vcipher 17, 17, 20 + vcipher 18, 18, 20 + + vcipher 15, 15, 21 + vcipher 16, 16, 21 + vcipher 17, 17, 21 + vcipher 18, 18, 21 + + vcipher 15, 15, 22 + vcipher 16, 16, 22 + vcipher 17, 17, 22 + vcipher 18, 18, 22 + + xxlor 19+32, 5, 5 + xxlor 20+32, 6, 6 + xxlor 21+32, 7, 7 + xxlor 22+32, 8, 8 + + vcipher 15, 15, 19 + vcipher 16, 16, 19 + vcipher 17, 17, 19 + vcipher 18, 18, 19 + + vcipher 15, 15, 20 + vcipher 16, 16, 20 + vcipher 17, 17, 20 + vcipher 18, 18, 20 + + vcipher 15, 15, 21 + vcipher 16, 16, 21 + vcipher 17, 17, 21 + vcipher 18, 18, 21 + + vcipher 15, 15, 22 + vcipher 16, 16, 22 + vcipher 17, 17, 22 + vcipher 18, 18, 22 + + xxlor 23+32, 9, 9 + vcipher 15, 15, 23 + vcipher 16, 16, 23 + vcipher 17, 17, 23 + vcipher 18, 18, 23 +.endm + + # 8x loops + # v15 - v22 - input states + # vs1 - vs9 - round keys + # +.macro Loop_aes_middle8x + xxlor 23+32, 1, 1 + xxlor 24+32, 2, 2 + xxlor 25+32, 3, 3 + xxlor 26+32, 4, 4 + + vcipher 15, 15, 23 + vcipher 16, 16, 23 + vcipher 17, 17, 23 + vcipher 18, 18, 23 + vcipher 19, 19, 23 + vcipher 20, 20, 23 + vcipher 21, 21, 23 + vcipher 22, 22, 23 + + vcipher 15, 15, 24 + vcipher 16, 16, 24 + vcipher 17, 17, 24 + vcipher 18, 18, 24 + vcipher 19, 19, 24 + vcipher 20, 20, 24 + vcipher 21, 21, 24 + vcipher 22, 22, 24 + + vcipher 15, 15, 25 + vcipher 16, 16, 25 + vcipher 17, 17, 25 + vcipher 18, 18, 25 + vcipher 19, 19, 25 + vcipher 20, 20, 25 + vcipher 21, 21, 25 + vcipher 22, 22, 25 + + vcipher 15, 15, 26 + vcipher 16, 16, 26 + vcipher 17, 17, 26 + vcipher 18, 18, 26 + vcipher 19, 19, 26 + vcipher 20, 20, 26 + vcipher 21, 21, 26 + vcipher 22, 22, 26 + + xxlor 23+32, 5, 5 + xxlor 24+32, 6, 6 + xxlor 25+32, 7, 7 + xxlor 26+32, 8, 8 + + vcipher 15, 15, 23 + vcipher 16, 16, 23 + vcipher 17, 17, 23 + vcipher 18, 18, 23 + vcipher 19, 19, 23 + vcipher 20, 20, 23 + vcipher 21, 21, 23 + vcipher 22, 22, 23 + + vcipher 15, 15, 24 + vcipher 16, 16, 24 + vcipher 17, 17, 24 + vcipher 18, 18, 24 + vcipher 19, 19, 24 + vcipher 20, 20, 24 + vcipher 21, 21, 24 + vcipher 22, 22, 24 + + vcipher 15, 15, 25 + vcipher 16, 16, 25 + vcipher 17, 17, 25 + vcipher 18, 18, 25 + vcipher 19, 19, 25 + vcipher 20, 20, 25 + vcipher 21, 21, 25 + vcipher 22, 22, 25 + + vcipher 15, 15, 26 + vcipher 16, 16, 26 + vcipher 17, 17, 26 + vcipher 18, 18, 26 + vcipher 19, 19, 26 + vcipher 20, 20, 26 + vcipher 21, 21, 26 + vcipher 22, 22, 26 + + xxlor 23+32, 9, 9 + vcipher 15, 15, 23 + vcipher 16, 16, 23 + vcipher 17, 17, 23 + vcipher 18, 18, 23 + vcipher 19, 19, 23 + vcipher 20, 20, 23 + vcipher 21, 21, 23 + vcipher 22, 22, 23 +.endm + +.macro Loop_aes_middle_1x + xxlor 19+32, 1, 1 + xxlor 20+32, 2, 2 + xxlor 21+32, 3, 3 + xxlor 22+32, 4, 4 + + vcipher 15, 15, 19 + vcipher 15, 15, 20 + vcipher 15, 15, 21 + vcipher 15, 15, 22 + + xxlor 19+32, 5, 5 + xxlor 20+32, 6, 6 + xxlor 21+32, 7, 7 + xxlor 22+32, 8, 8 + + vcipher 15, 15, 19 + vcipher 15, 15, 20 + vcipher 15, 15, 21 + vcipher 15, 15, 22 + + xxlor 19+32, 9, 9 + vcipher 15, 15, 19 +.endm + + # + # Compute 4x hash values based on Karatsuba method. + # +.macro ppc_aes_gcm_ghash + vxor 15, 15, 0 + + vpmsumd 23, 12, 15 # H4.L * X.L + vpmsumd 24, 9, 16 + vpmsumd 25, 6, 17 + vpmsumd 26, 3, 18 + + vxor 23, 23, 24 + vxor 23, 23, 25 + vxor 23, 23, 26 # L + + vpmsumd 24, 13, 15 # H4.L * X.H + H4.H * X.L + vpmsumd 25, 10, 16 # H3.L * X1.H + H3.H * X1.L + vpmsumd 26, 7, 17 + vpmsumd 27, 4, 18 + + vxor 24, 24, 25 + vxor 24, 24, 26 + vxor 24, 24, 27 # M + + # sum hash and reduction with H Poly + vpmsumd 28, 23, 2 # reduction + + vxor 29, 29, 29 + vsldoi 26, 24, 29, 8 # mL + vsldoi 29, 29, 24, 8 # mH + vxor 23, 23, 26 # mL + L + + vsldoi 23, 23, 23, 8 # swap + vxor 23, 23, 28 + + vpmsumd 24, 14, 15 # H4.H * X.H + vpmsumd 25, 11, 16 + vpmsumd 26, 8, 17 + vpmsumd 27, 5, 18 + + vxor 24, 24, 25 + vxor 24, 24, 26 + vxor 24, 24, 27 + + vxor 24, 24, 29 + + # sum hash and reduction with H Poly + vsldoi 27, 23, 23, 8 # swap + vpmsumd 23, 23, 2 + vxor 27, 27, 24 + vxor 23, 23, 27 + + xxlor 32, 23+32, 23+32 # update hash + +.endm + + # + # Combine two 4x ghash + # v15 - v22 - input blocks + # +.macro ppc_aes_gcm_ghash2_4x + # first 4x hash + vxor 15, 15, 0 # Xi + X + + vpmsumd 23, 12, 15 # H4.L * X.L + vpmsumd 24, 9, 16 + vpmsumd 25, 6, 17 + vpmsumd 26, 3, 18 + + vxor 23, 23, 24 + vxor 23, 23, 25 + vxor 23, 23, 26 # L + + vpmsumd 24, 13, 15 # H4.L * X.H + H4.H * X.L + vpmsumd 25, 10, 16 # H3.L * X1.H + H3.H * X1.L + vpmsumd 26, 7, 17 + vpmsumd 27, 4, 18 + + vxor 24, 24, 25 + vxor 24, 24, 26 + + # sum hash and reduction with H Poly + vpmsumd 28, 23, 2 # reduction + + vxor 29, 29, 29 + + vxor 24, 24, 27 # M + vsldoi 26, 24, 29, 8 # mL + vsldoi 29, 29, 24, 8 # mH + vxor 23, 23, 26 # mL + L + + vsldoi 23, 23, 23, 8 # swap + vxor 23, 23, 28 + + vpmsumd 24, 14, 15 # H4.H * X.H + vpmsumd 25, 11, 16 + vpmsumd 26, 8, 17 + vpmsumd 27, 5, 18 + + vxor 24, 24, 25 + vxor 24, 24, 26 + vxor 24, 24, 27 # H + + vxor 24, 24, 29 # H + mH + + # sum hash and reduction with H Poly + vsldoi 27, 23, 23, 8 # swap + vpmsumd 23, 23, 2 + vxor 27, 27, 24 + vxor 27, 23, 27 # 1st Xi + + # 2nd 4x hash + vpmsumd 24, 9, 20 + vpmsumd 25, 6, 21 + vpmsumd 26, 3, 22 + vxor 19, 19, 27 # Xi + X + vpmsumd 23, 12, 19 # H4.L * X.L + + vxor 23, 23, 24 + vxor 23, 23, 25 + vxor 23, 23, 26 # L + + vpmsumd 24, 13, 19 # H4.L * X.H + H4.H * X.L + vpmsumd 25, 10, 20 # H3.L * X1.H + H3.H * X1.L + vpmsumd 26, 7, 21 + vpmsumd 27, 4, 22 + + vxor 24, 24, 25 + vxor 24, 24, 26 + + # sum hash and reduction with H Poly + vpmsumd 28, 23, 2 # reduction + + vxor 29, 29, 29 + + vxor 24, 24, 27 # M + vsldoi 26, 24, 29, 8 # mL + vsldoi 29, 29, 24, 8 # mH + vxor 23, 23, 26 # mL + L + + vsldoi 23, 23, 23, 8 # swap + vxor 23, 23, 28 + + vpmsumd 24, 14, 19 # H4.H * X.H + vpmsumd 25, 11, 20 + vpmsumd 26, 8, 21 + vpmsumd 27, 5, 22 + + vxor 24, 24, 25 + vxor 24, 24, 26 + vxor 24, 24, 27 # H + + vxor 24, 24, 29 # H + mH + + # sum hash and reduction with H Poly + vsldoi 27, 23, 23, 8 # swap + vpmsumd 23, 23, 2 + vxor 27, 27, 24 + vxor 23, 23, 27 + + xxlor 32, 23+32, 23+32 # update hash + +.endm + + # + # Compute update single hash + # +.macro ppc_update_hash_1x + vxor 28, 28, 0 + + vxor 19, 19, 19 + + vpmsumd 22, 3, 28 # L + vpmsumd 23, 4, 28 # M + vpmsumd 24, 5, 28 # H + + vpmsumd 27, 22, 2 # reduction + + vsldoi 25, 23, 19, 8 # mL + vsldoi 26, 19, 23, 8 # mH + vxor 22, 22, 25 # LL + LL + vxor 24, 24, 26 # HH + HH + + vsldoi 22, 22, 22, 8 # swap + vxor 22, 22, 27 + + vsldoi 20, 22, 22, 8 # swap + vpmsumd 22, 22, 2 # reduction + vxor 20, 20, 24 + vxor 22, 22, 20 + + vmr 0, 22 # update hash + +.endm + +.macro SAVE_REGS + stdu 1,-640(1) + mflr 0 + + std 14,112(1) + std 15,120(1) + std 16,128(1) + std 17,136(1) + std 18,144(1) + std 19,152(1) + std 20,160(1) + std 21,168(1) + li 9, 256 + stvx 20, 9, 1 + addi 9, 9, 16 + stvx 21, 9, 1 + addi 9, 9, 16 + stvx 22, 9, 1 + addi 9, 9, 16 + stvx 23, 9, 1 + addi 9, 9, 16 + stvx 24, 9, 1 + addi 9, 9, 16 + stvx 25, 9, 1 + addi 9, 9, 16 + stvx 26, 9, 1 + addi 9, 9, 16 + stvx 27, 9, 1 + addi 9, 9, 16 + stvx 28, 9, 1 + addi 9, 9, 16 + stvx 29, 9, 1 + addi 9, 9, 16 + stvx 30, 9, 1 + addi 9, 9, 16 + stvx 31, 9, 1 + stxv 14, 464(1) + stxv 15, 480(1) + stxv 16, 496(1) + stxv 17, 512(1) + stxv 18, 528(1) + stxv 19, 544(1) + stxv 20, 560(1) + stxv 21, 576(1) + stxv 22, 592(1) + std 0, 656(1) +.endm + +.macro RESTORE_REGS + lxv 14, 464(1) + lxv 15, 480(1) + lxv 16, 496(1) + lxv 17, 512(1) + lxv 18, 528(1) + lxv 19, 544(1) + lxv 20, 560(1) + lxv 21, 576(1) + lxv 22, 592(1) + li 9, 256 + lvx 20, 9, 1 + addi 9, 9, 16 + lvx 21, 9, 1 + addi 9, 9, 16 + lvx 22, 9, 1 + addi 9, 9, 16 + lvx 23, 9, 1 + addi 9, 9, 16 + lvx 24, 9, 1 + addi 9, 9, 16 + lvx 25, 9, 1 + addi 9, 9, 16 + lvx 26, 9, 1 + addi 9, 9, 16 + lvx 27, 9, 1 + addi 9, 9, 16 + lvx 28, 9, 1 + addi 9, 9, 16 + lvx 29, 9, 1 + addi 9, 9, 16 + lvx 30, 9, 1 + addi 9, 9, 16 + lvx 31, 9, 1 + + ld 0, 656(1) + ld 14,112(1) + ld 15,120(1) + ld 16,128(1) + ld 17,136(1) + ld 18,144(1) + ld 19,152(1) + ld 20,160(1) + ld 21,168(1) + + mtlr 0 + addi 1, 1, 640 +.endm + +.macro LOAD_HASH_TABLE + # Load Xi + lxvb16x 32, 0, 8 # load Xi + + # load Hash - h^4, h^3, h^2, h + li 10, 32 + lxvd2x 2+32, 10, 8 # H Poli + li 10, 48 + lxvd2x 3+32, 10, 8 # Hl + li 10, 64 + lxvd2x 4+32, 10, 8 # H + li 10, 80 + lxvd2x 5+32, 10, 8 # Hh + + li 10, 96 + lxvd2x 6+32, 10, 8 # H^2l + li 10, 112 + lxvd2x 7+32, 10, 8 # H^2 + li 10, 128 + lxvd2x 8+32, 10, 8 # H^2h + + li 10, 144 + lxvd2x 9+32, 10, 8 # H^3l + li 10, 160 + lxvd2x 10+32, 10, 8 # H^3 + li 10, 176 + lxvd2x 11+32, 10, 8 # H^3h + + li 10, 192 + lxvd2x 12+32, 10, 8 # H^4l + li 10, 208 + lxvd2x 13+32, 10, 8 # H^4 + li 10, 224 + lxvd2x 14+32, 10, 8 # H^4h +.endm + + # + # aes_p10_gcm_encrypt (const void *inp, void *out, size_t len, + # const char *rk, unsigned char iv[16], void *Xip); + # + # r3 - inp + # r4 - out + # r5 - len + # r6 - AES round keys + # r7 - iv and other data + # r8 - Xi, HPoli, hash keys + # + # rounds is at offset 240 in rk + # Xi is at 0 in gcm_table (Xip). + # +_GLOBAL(aes_p10_gcm_encrypt) +.align 5 + + SAVE_REGS + + LOAD_HASH_TABLE + + # initialize ICB: GHASH( IV ), IV - r7 + lxvb16x 30+32, 0, 7 # load IV - v30 + + mr 12, 5 # length + li 11, 0 # block index + + # counter 1 + vxor 31, 31, 31 + vspltisb 22, 1 + vsldoi 31, 31, 22,1 # counter 1 + + # load round key to VSR + lxv 0, 0(6) + lxv 1, 0x10(6) + lxv 2, 0x20(6) + lxv 3, 0x30(6) + lxv 4, 0x40(6) + lxv 5, 0x50(6) + lxv 6, 0x60(6) + lxv 7, 0x70(6) + lxv 8, 0x80(6) + lxv 9, 0x90(6) + lxv 10, 0xa0(6) + + # load rounds - 10 (128), 12 (192), 14 (256) + lwz 9,240(6) + + # + # vxor state, state, w # addroundkey + xxlor 32+29, 0, 0 + vxor 15, 30, 29 # IV + round key - add round key 0 + + cmpdi 9, 10 + beq Loop_aes_gcm_8x + + # load 2 more round keys (v11, v12) + lxv 11, 0xb0(6) + lxv 12, 0xc0(6) + + cmpdi 9, 12 + beq Loop_aes_gcm_8x + + # load 2 more round keys (v11, v12, v13, v14) + lxv 13, 0xd0(6) + lxv 14, 0xe0(6) + cmpdi 9, 14 + beq Loop_aes_gcm_8x + + b aes_gcm_out + +.align 5 +Loop_aes_gcm_8x: + mr 14, 3 + mr 9, 4 + + # + # check partial block + # +Continue_partial_check: + ld 15, 56(7) + cmpdi 15, 0 + beq Continue + bgt Final_block + cmpdi 15, 16 + blt Final_block + +Continue: + # n blcoks + li 10, 128 + divdu 10, 12, 10 # n 128 bytes-blocks + cmpdi 10, 0 + beq Loop_last_block + + vaddudm 30, 30, 31 # IV + counter + vxor 16, 30, 29 + vaddudm 30, 30, 31 + vxor 17, 30, 29 + vaddudm 30, 30, 31 + vxor 18, 30, 29 + vaddudm 30, 30, 31 + vxor 19, 30, 29 + vaddudm 30, 30, 31 + vxor 20, 30, 29 + vaddudm 30, 30, 31 + vxor 21, 30, 29 + vaddudm 30, 30, 31 + vxor 22, 30, 29 + + mtctr 10 + + li 15, 16 + li 16, 32 + li 17, 48 + li 18, 64 + li 19, 80 + li 20, 96 + li 21, 112 + + lwz 10, 240(6) + +Loop_8x_block: + + lxvb16x 15, 0, 14 # load block + lxvb16x 16, 15, 14 # load block + lxvb16x 17, 16, 14 # load block + lxvb16x 18, 17, 14 # load block + lxvb16x 19, 18, 14 # load block + lxvb16x 20, 19, 14 # load block + lxvb16x 21, 20, 14 # load block + lxvb16x 22, 21, 14 # load block + addi 14, 14, 128 + + Loop_aes_middle8x + + xxlor 23+32, 10, 10 + + cmpdi 10, 10 + beq Do_next_ghash + + # 192 bits + xxlor 24+32, 11, 11 + + vcipher 15, 15, 23 + vcipher 16, 16, 23 + vcipher 17, 17, 23 + vcipher 18, 18, 23 + vcipher 19, 19, 23 + vcipher 20, 20, 23 + vcipher 21, 21, 23 + vcipher 22, 22, 23 + + vcipher 15, 15, 24 + vcipher 16, 16, 24 + vcipher 17, 17, 24 + vcipher 18, 18, 24 + vcipher 19, 19, 24 + vcipher 20, 20, 24 + vcipher 21, 21, 24 + vcipher 22, 22, 24 + + xxlor 23+32, 12, 12 + + cmpdi 10, 12 + beq Do_next_ghash + + # 256 bits + xxlor 24+32, 13, 13 + + vcipher 15, 15, 23 + vcipher 16, 16, 23 + vcipher 17, 17, 23 + vcipher 18, 18, 23 + vcipher 19, 19, 23 + vcipher 20, 20, 23 + vcipher 21, 21, 23 + vcipher 22, 22, 23 + + vcipher 15, 15, 24 + vcipher 16, 16, 24 + vcipher 17, 17, 24 + vcipher 18, 18, 24 + vcipher 19, 19, 24 + vcipher 20, 20, 24 + vcipher 21, 21, 24 + vcipher 22, 22, 24 + + xxlor 23+32, 14, 14 + + cmpdi 10, 14 + beq Do_next_ghash + b aes_gcm_out + +Do_next_ghash: + + # + # last round + vcipherlast 15, 15, 23 + vcipherlast 16, 16, 23 + + xxlxor 47, 47, 15 + stxvb16x 47, 0, 9 # store output + xxlxor 48, 48, 16 + stxvb16x 48, 15, 9 # store output + + vcipherlast 17, 17, 23 + vcipherlast 18, 18, 23 + + xxlxor 49, 49, 17 + stxvb16x 49, 16, 9 # store output + xxlxor 50, 50, 18 + stxvb16x 50, 17, 9 # store output + + vcipherlast 19, 19, 23 + vcipherlast 20, 20, 23 + + xxlxor 51, 51, 19 + stxvb16x 51, 18, 9 # store output + xxlxor 52, 52, 20 + stxvb16x 52, 19, 9 # store output + + vcipherlast 21, 21, 23 + vcipherlast 22, 22, 23 + + xxlxor 53, 53, 21 + stxvb16x 53, 20, 9 # store output + xxlxor 54, 54, 22 + stxvb16x 54, 21, 9 # store output + + addi 9, 9, 128 + + # ghash here + ppc_aes_gcm_ghash2_4x + + xxlor 27+32, 0, 0 + vaddudm 30, 30, 31 # IV + counter + vmr 29, 30 + vxor 15, 30, 27 # add round key + vaddudm 30, 30, 31 + vxor 16, 30, 27 + vaddudm 30, 30, 31 + vxor 17, 30, 27 + vaddudm 30, 30, 31 + vxor 18, 30, 27 + vaddudm 30, 30, 31 + vxor 19, 30, 27 + vaddudm 30, 30, 31 + vxor 20, 30, 27 + vaddudm 30, 30, 31 + vxor 21, 30, 27 + vaddudm 30, 30, 31 + vxor 22, 30, 27 + + addi 12, 12, -128 + addi 11, 11, 128 + + bdnz Loop_8x_block + + vmr 30, 29 + stxvb16x 30+32, 0, 7 # update IV + +Loop_last_block: + cmpdi 12, 0 + beq aes_gcm_out + + # loop last few blocks + li 10, 16 + divdu 10, 12, 10 + + mtctr 10 + + lwz 10, 240(6) + + cmpdi 12, 16 + blt Final_block + +Next_rem_block: + lxvb16x 15, 0, 14 # load block + + Loop_aes_middle_1x + + xxlor 23+32, 10, 10 + + cmpdi 10, 10 + beq Do_next_1x + + # 192 bits + xxlor 24+32, 11, 11 + + vcipher 15, 15, 23 + vcipher 15, 15, 24 + + xxlor 23+32, 12, 12 + + cmpdi 10, 12 + beq Do_next_1x + + # 256 bits + xxlor 24+32, 13, 13 + + vcipher 15, 15, 23 + vcipher 15, 15, 24 + + xxlor 23+32, 14, 14 + + cmpdi 10, 14 + beq Do_next_1x + +Do_next_1x: + vcipherlast 15, 15, 23 + + xxlxor 47, 47, 15 + stxvb16x 47, 0, 9 # store output + addi 14, 14, 16 + addi 9, 9, 16 + + vmr 28, 15 + ppc_update_hash_1x + + addi 12, 12, -16 + addi 11, 11, 16 + xxlor 19+32, 0, 0 + vaddudm 30, 30, 31 # IV + counter + vxor 15, 30, 19 # add round key + + bdnz Next_rem_block + + li 15, 0 + std 15, 56(7) # clear partial? + stxvb16x 30+32, 0, 7 # update IV + cmpdi 12, 0 + beq aes_gcm_out + +Final_block: + lwz 10, 240(6) + Loop_aes_middle_1x + + xxlor 23+32, 10, 10 + + cmpdi 10, 10 + beq Do_final_1x + + # 192 bits + xxlor 24+32, 11, 11 + + vcipher 15, 15, 23 + vcipher 15, 15, 24 + + xxlor 23+32, 12, 12 + + cmpdi 10, 12 + beq Do_final_1x + + # 256 bits + xxlor 24+32, 13, 13 + + vcipher 15, 15, 23 + vcipher 15, 15, 24 + + xxlor 23+32, 14, 14 + + cmpdi 10, 14 + beq Do_final_1x + +Do_final_1x: + vcipherlast 15, 15, 23 + + # check partial block + li 21, 0 # encrypt + ld 15, 56(7) # partial? + cmpdi 15, 0 + beq Normal_block + bl Do_partial_block + + cmpdi 12, 0 + ble aes_gcm_out + + b Continue_partial_check + +Normal_block: + lxvb16x 15, 0, 14 # load last block + xxlxor 47, 47, 15 + + # create partial block mask + li 15, 16 + sub 15, 15, 12 # index to the mask + + vspltisb 16, -1 # first 16 bytes - 0xffff...ff + vspltisb 17, 0 # second 16 bytes - 0x0000...00 + li 10, 192 + stvx 16, 10, 1 + addi 10, 10, 16 + stvx 17, 10, 1 + + addi 10, 1, 192 + lxvb16x 16, 15, 10 # load partial block mask + xxland 47, 47, 16 + + vmr 28, 15 + ppc_update_hash_1x + + # * should store only the remaining bytes. + bl Write_partial_block + + stxvb16x 30+32, 0, 7 # update IV + std 12, 56(7) # update partial? + li 16, 16 + + stxvb16x 32, 0, 8 # write out Xi + stxvb16x 32, 16, 8 # write out Xi + b aes_gcm_out + + # + # Compute data mask + # +.macro GEN_MASK _mask _start _end + vspltisb 16, -1 # first 16 bytes - 0xffff...ff + vspltisb 17, 0 # second 16 bytes - 0x0000...00 + li 10, 192 + stxvb16x 17+32, 10, 1 + add 10, 10, \_start + stxvb16x 16+32, 10, 1 + add 10, 10, \_end + stxvb16x 17+32, 10, 1 + + addi 10, 1, 192 + lxvb16x \_mask, 0, 10 # load partial block mask +.endm + + # + # Handle multiple partial blocks for encrypt and decrypt + # operations. + # +SYM_FUNC_START_LOCAL(Do_partial_block) + add 17, 15, 5 + cmpdi 17, 16 + bgt Big_block + GEN_MASK 18, 15, 5 + b _Partial +SYM_FUNC_END(Do_partial_block) +Big_block: + li 16, 16 + GEN_MASK 18, 15, 16 + +_Partial: + lxvb16x 17+32, 0, 14 # load last block + sldi 16, 15, 3 + mtvsrdd 32+16, 0, 16 + vsro 17, 17, 16 + xxlxor 47, 47, 17+32 + xxland 47, 47, 18 + + vxor 0, 0, 0 # clear Xi + vmr 28, 15 + + cmpdi 21, 0 # encrypt/decrypt ops? + beq Skip_decrypt + xxland 32+28, 32+17, 18 + +Skip_decrypt: + + ppc_update_hash_1x + + li 16, 16 + lxvb16x 32+29, 16, 8 + vxor 0, 0, 29 + stxvb16x 32, 0, 8 # save Xi + stxvb16x 32, 16, 8 # save Xi + + # store partial block + # loop the rest of the stream if any + sldi 16, 15, 3 + mtvsrdd 32+16, 0, 16 + vslo 15, 15, 16 + #stxvb16x 15+32, 0, 9 # last block + + li 16, 16 + sub 17, 16, 15 # 16 - partial + + add 16, 15, 5 + cmpdi 16, 16 + bgt Larger_16 + mr 17, 5 +Larger_16: + + # write partial + li 10, 192 + stxvb16x 15+32, 10, 1 # save current block + + addi 10, 9, -1 + addi 16, 1, 191 + mtctr 17 # move partial byte count + +Write_last_partial: + lbzu 18, 1(16) + stbu 18, 1(10) + bdnz Write_last_partial + # Complete loop partial + + add 14, 14, 17 + add 9, 9, 17 + sub 12, 12, 17 + add 11, 11, 17 + + add 15, 15, 5 + cmpdi 15, 16 + blt Save_partial + + vaddudm 30, 30, 31 + stxvb16x 30+32, 0, 7 # update IV + xxlor 32+29, 0, 0 + vxor 15, 30, 29 # IV + round key - add round key 0 + li 15, 0 + std 15, 56(7) # partial done - clear + b Partial_done +Save_partial: + std 15, 56(7) # partial + +Partial_done: + blr + + # + # Write partial block + # r9 - output + # r12 - remaining bytes + # v15 - partial input data + # +SYM_FUNC_START_LOCAL(Write_partial_block) + li 10, 192 + stxvb16x 15+32, 10, 1 # last block + + addi 10, 9, -1 + addi 16, 1, 191 + + mtctr 12 # remaining bytes + li 15, 0 + +Write_last_byte: + lbzu 14, 1(16) + stbu 14, 1(10) + bdnz Write_last_byte + blr +SYM_FUNC_END(Write_partial_block) + +aes_gcm_out: + # out = state + stxvb16x 32, 0, 8 # write out Xi + add 3, 11, 12 # return count + + RESTORE_REGS + blr + + # + # 8x Decrypt + # +_GLOBAL(aes_p10_gcm_decrypt) +.align 5 + + SAVE_REGS + + LOAD_HASH_TABLE + + # initialize ICB: GHASH( IV ), IV - r7 + lxvb16x 30+32, 0, 7 # load IV - v30 + + mr 12, 5 # length + li 11, 0 # block index + + # counter 1 + vxor 31, 31, 31 + vspltisb 22, 1 + vsldoi 31, 31, 22,1 # counter 1 + + # load round key to VSR + lxv 0, 0(6) + lxv 1, 0x10(6) + lxv 2, 0x20(6) + lxv 3, 0x30(6) + lxv 4, 0x40(6) + lxv 5, 0x50(6) + lxv 6, 0x60(6) + lxv 7, 0x70(6) + lxv 8, 0x80(6) + lxv 9, 0x90(6) + lxv 10, 0xa0(6) + + # load rounds - 10 (128), 12 (192), 14 (256) + lwz 9,240(6) + + # + # vxor state, state, w # addroundkey + xxlor 32+29, 0, 0 + vxor 15, 30, 29 # IV + round key - add round key 0 + + cmpdi 9, 10 + beq Loop_aes_gcm_8x_dec + + # load 2 more round keys (v11, v12) + lxv 11, 0xb0(6) + lxv 12, 0xc0(6) + + cmpdi 9, 12 + beq Loop_aes_gcm_8x_dec + + # load 2 more round keys (v11, v12, v13, v14) + lxv 13, 0xd0(6) + lxv 14, 0xe0(6) + cmpdi 9, 14 + beq Loop_aes_gcm_8x_dec + + b aes_gcm_out + +.align 5 +Loop_aes_gcm_8x_dec: + mr 14, 3 + mr 9, 4 + + # + # check partial block + # +Continue_partial_check_dec: + ld 15, 56(7) + cmpdi 15, 0 + beq Continue_dec + bgt Final_block_dec + cmpdi 15, 16 + blt Final_block_dec + +Continue_dec: + # n blcoks + li 10, 128 + divdu 10, 12, 10 # n 128 bytes-blocks + cmpdi 10, 0 + beq Loop_last_block_dec + + vaddudm 30, 30, 31 # IV + counter + vxor 16, 30, 29 + vaddudm 30, 30, 31 + vxor 17, 30, 29 + vaddudm 30, 30, 31 + vxor 18, 30, 29 + vaddudm 30, 30, 31 + vxor 19, 30, 29 + vaddudm 30, 30, 31 + vxor 20, 30, 29 + vaddudm 30, 30, 31 + vxor 21, 30, 29 + vaddudm 30, 30, 31 + vxor 22, 30, 29 + + mtctr 10 + + li 15, 16 + li 16, 32 + li 17, 48 + li 18, 64 + li 19, 80 + li 20, 96 + li 21, 112 + + lwz 10, 240(6) + +Loop_8x_block_dec: + + lxvb16x 15, 0, 14 # load block + lxvb16x 16, 15, 14 # load block + lxvb16x 17, 16, 14 # load block + lxvb16x 18, 17, 14 # load block + lxvb16x 19, 18, 14 # load block + lxvb16x 20, 19, 14 # load block + lxvb16x 21, 20, 14 # load block + lxvb16x 22, 21, 14 # load block + addi 14, 14, 128 + + Loop_aes_middle8x + + xxlor 23+32, 10, 10 + + cmpdi 10, 10 + beq Do_next_ghash_dec + + # 192 bits + xxlor 24+32, 11, 11 + + vcipher 15, 15, 23 + vcipher 16, 16, 23 + vcipher 17, 17, 23 + vcipher 18, 18, 23 + vcipher 19, 19, 23 + vcipher 20, 20, 23 + vcipher 21, 21, 23 + vcipher 22, 22, 23 + + vcipher 15, 15, 24 + vcipher 16, 16, 24 + vcipher 17, 17, 24 + vcipher 18, 18, 24 + vcipher 19, 19, 24 + vcipher 20, 20, 24 + vcipher 21, 21, 24 + vcipher 22, 22, 24 + + xxlor 23+32, 12, 12 + + cmpdi 10, 12 + beq Do_next_ghash_dec + + # 256 bits + xxlor 24+32, 13, 13 + + vcipher 15, 15, 23 + vcipher 16, 16, 23 + vcipher 17, 17, 23 + vcipher 18, 18, 23 + vcipher 19, 19, 23 + vcipher 20, 20, 23 + vcipher 21, 21, 23 + vcipher 22, 22, 23 + + vcipher 15, 15, 24 + vcipher 16, 16, 24 + vcipher 17, 17, 24 + vcipher 18, 18, 24 + vcipher 19, 19, 24 + vcipher 20, 20, 24 + vcipher 21, 21, 24 + vcipher 22, 22, 24 + + xxlor 23+32, 14, 14 + + cmpdi 10, 14 + beq Do_next_ghash_dec + b aes_gcm_out + +Do_next_ghash_dec: + + # + # last round + vcipherlast 15, 15, 23 + vcipherlast 16, 16, 23 + + xxlxor 47, 47, 15 + stxvb16x 47, 0, 9 # store output + xxlxor 48, 48, 16 + stxvb16x 48, 15, 9 # store output + + vcipherlast 17, 17, 23 + vcipherlast 18, 18, 23 + + xxlxor 49, 49, 17 + stxvb16x 49, 16, 9 # store output + xxlxor 50, 50, 18 + stxvb16x 50, 17, 9 # store output + + vcipherlast 19, 19, 23 + vcipherlast 20, 20, 23 + + xxlxor 51, 51, 19 + stxvb16x 51, 18, 9 # store output + xxlxor 52, 52, 20 + stxvb16x 52, 19, 9 # store output + + vcipherlast 21, 21, 23 + vcipherlast 22, 22, 23 + + xxlxor 53, 53, 21 + stxvb16x 53, 20, 9 # store output + xxlxor 54, 54, 22 + stxvb16x 54, 21, 9 # store output + + addi 9, 9, 128 + + xxlor 15+32, 15, 15 + xxlor 16+32, 16, 16 + xxlor 17+32, 17, 17 + xxlor 18+32, 18, 18 + xxlor 19+32, 19, 19 + xxlor 20+32, 20, 20 + xxlor 21+32, 21, 21 + xxlor 22+32, 22, 22 + + # ghash here + ppc_aes_gcm_ghash2_4x + + xxlor 27+32, 0, 0 + vaddudm 30, 30, 31 # IV + counter + vmr 29, 30 + vxor 15, 30, 27 # add round key + vaddudm 30, 30, 31 + vxor 16, 30, 27 + vaddudm 30, 30, 31 + vxor 17, 30, 27 + vaddudm 30, 30, 31 + vxor 18, 30, 27 + vaddudm 30, 30, 31 + vxor 19, 30, 27 + vaddudm 30, 30, 31 + vxor 20, 30, 27 + vaddudm 30, 30, 31 + vxor 21, 30, 27 + vaddudm 30, 30, 31 + vxor 22, 30, 27 + + addi 12, 12, -128 + addi 11, 11, 128 + + bdnz Loop_8x_block_dec + + vmr 30, 29 + stxvb16x 30+32, 0, 7 # update IV + +Loop_last_block_dec: + cmpdi 12, 0 + beq aes_gcm_out + + # loop last few blocks + li 10, 16 + divdu 10, 12, 10 + + mtctr 10 + + lwz 10, 240(6) + + cmpdi 12, 16 + blt Final_block_dec + +Next_rem_block_dec: + lxvb16x 15, 0, 14 # load block + + Loop_aes_middle_1x + + xxlor 23+32, 10, 10 + + cmpdi 10, 10 + beq Do_next_1x_dec + + # 192 bits + xxlor 24+32, 11, 11 + + vcipher 15, 15, 23 + vcipher 15, 15, 24 + + xxlor 23+32, 12, 12 + + cmpdi 10, 12 + beq Do_next_1x_dec + + # 256 bits + xxlor 24+32, 13, 13 + + vcipher 15, 15, 23 + vcipher 15, 15, 24 + + xxlor 23+32, 14, 14 + + cmpdi 10, 14 + beq Do_next_1x_dec + +Do_next_1x_dec: + vcipherlast 15, 15, 23 + + xxlxor 47, 47, 15 + stxvb16x 47, 0, 9 # store output + addi 14, 14, 16 + addi 9, 9, 16 + + xxlor 28+32, 15, 15 + #vmr 28, 15 + ppc_update_hash_1x + + addi 12, 12, -16 + addi 11, 11, 16 + xxlor 19+32, 0, 0 + vaddudm 30, 30, 31 # IV + counter + vxor 15, 30, 19 # add round key + + bdnz Next_rem_block_dec + + li 15, 0 + std 15, 56(7) # clear partial? + stxvb16x 30+32, 0, 7 # update IV + cmpdi 12, 0 + beq aes_gcm_out + +Final_block_dec: + lwz 10, 240(6) + Loop_aes_middle_1x + + xxlor 23+32, 10, 10 + + cmpdi 10, 10 + beq Do_final_1x_dec + + # 192 bits + xxlor 24+32, 11, 11 + + vcipher 15, 15, 23 + vcipher 15, 15, 24 + + xxlor 23+32, 12, 12 + + cmpdi 10, 12 + beq Do_final_1x_dec + + # 256 bits + xxlor 24+32, 13, 13 + + vcipher 15, 15, 23 + vcipher 15, 15, 24 + + xxlor 23+32, 14, 14 + + cmpdi 10, 14 + beq Do_final_1x_dec + +Do_final_1x_dec: + vcipherlast 15, 15, 23 + + # check partial block + li 21, 1 # decrypt + ld 15, 56(7) # partial? + cmpdi 15, 0 + beq Normal_block_dec + bl Do_partial_block + cmpdi 12, 0 + ble aes_gcm_out + + b Continue_partial_check_dec + +Normal_block_dec: + lxvb16x 15, 0, 14 # load last block + xxlxor 47, 47, 15 + + # create partial block mask + li 15, 16 + sub 15, 15, 12 # index to the mask + + vspltisb 16, -1 # first 16 bytes - 0xffff...ff + vspltisb 17, 0 # second 16 bytes - 0x0000...00 + li 10, 192 + stvx 16, 10, 1 + addi 10, 10, 16 + stvx 17, 10, 1 + + addi 10, 1, 192 + lxvb16x 16, 15, 10 # load partial block mask + xxland 47, 47, 16 + + xxland 32+28, 15, 16 + #vmr 28, 15 + ppc_update_hash_1x + + # * should store only the remaining bytes. + bl Write_partial_block + + stxvb16x 30+32, 0, 7 # update IV + std 12, 56(7) # update partial? + li 16, 16 + + stxvb16x 32, 0, 8 # write out Xi + stxvb16x 32, 16, 8 # write out Xi + b aes_gcm_out diff --git a/arch/powerpc/crypto/aesp8-ppc.pl b/arch/powerpc/crypto/aesp8-ppc.pl new file mode 100644 index 000000000000..1f22aec27d79 --- /dev/null +++ b/arch/powerpc/crypto/aesp8-ppc.pl @@ -0,0 +1,585 @@ +#! /usr/bin/env perl +# SPDX-License-Identifier: GPL-2.0 + +# This code is taken from CRYPTOGAMs[1] and is included here using the option +# in the license to distribute the code under the GPL. Therefore this program +# is free software; you can redistribute it and/or modify it under the terms of +# the GNU General Public License version 2 as published by the Free Software +# Foundation. +# +# [1] https://www.openssl.org/~appro/cryptogams/ + +# Copyright (c) 2006-2017, CRYPTOGAMS by <appro@openssl.org> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain copyright notices, +# this list of conditions and the following disclaimer. +# +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials +# provided with the distribution. +# +# * Neither the name of the CRYPTOGAMS nor the names of its +# copyright holder and contributors may be used to endorse or +# promote products derived from this software without specific +# prior written permission. +# +# ALTERNATIVELY, provided that this notice is retained in full, this +# product may be distributed under the terms of the GNU General Public +# License (GPL), in which case the provisions of the GPL apply INSTEAD OF +# those given above. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# ==================================================================== +# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see https://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# This module implements support for AES instructions as per PowerISA +# specification version 2.07, first implemented by POWER8 processor. +# The module is endian-agnostic in sense that it supports both big- +# and little-endian cases. Data alignment in parallelizable modes is +# handled with VSX loads and stores, which implies MSR.VSX flag being +# set. It should also be noted that ISA specification doesn't prohibit +# alignment exceptions for these instructions on page boundaries. +# Initially alignment was handled in pure AltiVec/VMX way [when data +# is aligned programmatically, which in turn guarantees exception- +# free execution], but it turned to hamper performance when vcipher +# instructions are interleaved. It's reckoned that eventual +# misalignment penalties at page boundaries are in average lower +# than additional overhead in pure AltiVec approach. +# +# May 2016 +# +# Add XTS subroutine, 9x on little- and 12x improvement on big-endian +# systems were measured. +# +###################################################################### +# Current large-block performance in cycles per byte processed with +# 128-bit key (less is better). +# +# CBC en-/decrypt CTR XTS +# POWER8[le] 3.96/0.72 0.74 1.1 +# POWER8[be] 3.75/0.65 0.66 1.0 + +$flavour = shift; + +if ($flavour =~ /64/) { + $SIZE_T =8; + $LRSAVE =2*$SIZE_T; + $STU ="stdu"; + $POP ="ld"; + $PUSH ="std"; + $UCMP ="cmpld"; + $SHL ="sldi"; +} elsif ($flavour =~ /32/) { + $SIZE_T =4; + $LRSAVE =$SIZE_T; + $STU ="stwu"; + $POP ="lwz"; + $PUSH ="stw"; + $UCMP ="cmplw"; + $SHL ="slwi"; +} else { die "nonsense $flavour"; } + +$LITTLE_ENDIAN = ($flavour=~/le$/) ? $SIZE_T : 0; + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or +die "can't locate ppc-xlate.pl"; + +open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!"; + +$FRAME=8*$SIZE_T; +$prefix="aes_p8"; + +$sp="r1"; +$vrsave="r12"; + +######################################################################### +{{{ # Key setup procedures # +my ($inp,$bits,$out,$ptr,$cnt,$rounds)=map("r$_",(3..8)); +my ($zero,$in0,$in1,$key,$rcon,$mask,$tmp)=map("v$_",(0..6)); +my ($stage,$outperm,$outmask,$outhead,$outtail)=map("v$_",(7..11)); + +$code.=<<___; +.machine "any" + +.text + +.align 7 +rcon: +.long 0x01000000, 0x01000000, 0x01000000, 0x01000000 ?rev +.long 0x1b000000, 0x1b000000, 0x1b000000, 0x1b000000 ?rev +.long 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c ?rev +.long 0,0,0,0 ?asis +Lconsts: + mflr r0 + bcl 20,31,\$+4 + mflr $ptr #vvvvv "distance between . and rcon + addi $ptr,$ptr,-0x48 + mtlr r0 + blr + .long 0 + .byte 0,12,0x14,0,0,0,0,0 +.asciz "AES for PowerISA 2.07, CRYPTOGAMS by <appro\@openssl.org>" + +.globl .${prefix}_set_encrypt_key +Lset_encrypt_key: + mflr r11 + $PUSH r11,$LRSAVE($sp) + + li $ptr,-1 + ${UCMP}i $inp,0 + beq- Lenc_key_abort # if ($inp==0) return -1; + ${UCMP}i $out,0 + beq- Lenc_key_abort # if ($out==0) return -1; + li $ptr,-2 + cmpwi $bits,128 + blt- Lenc_key_abort + cmpwi $bits,256 + bgt- Lenc_key_abort + andi. r0,$bits,0x3f + bne- Lenc_key_abort + + lis r0,0xfff0 + mfspr $vrsave,256 + mtspr 256,r0 + + bl Lconsts + mtlr r11 + + neg r9,$inp + lvx $in0,0,$inp + addi $inp,$inp,15 # 15 is not typo + lvsr $key,0,r9 # borrow $key + li r8,0x20 + cmpwi $bits,192 + lvx $in1,0,$inp + le?vspltisb $mask,0x0f # borrow $mask + lvx $rcon,0,$ptr + le?vxor $key,$key,$mask # adjust for byte swap + lvx $mask,r8,$ptr + addi $ptr,$ptr,0x10 + vperm $in0,$in0,$in1,$key # align [and byte swap in LE] + li $cnt,8 + vxor $zero,$zero,$zero + mtctr $cnt + + ?lvsr $outperm,0,$out + vspltisb $outmask,-1 + lvx $outhead,0,$out + ?vperm $outmask,$zero,$outmask,$outperm + + blt Loop128 + addi $inp,$inp,8 + beq L192 + addi $inp,$inp,8 + b L256 + +.align 4 +Loop128: + vperm $key,$in0,$in0,$mask # rotate-n-splat + vsldoi $tmp,$zero,$in0,12 # >>32 + vperm $outtail,$in0,$in0,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + vcipherlast $key,$key,$rcon + stvx $stage,0,$out + addi $out,$out,16 + + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + vadduwm $rcon,$rcon,$rcon + vxor $in0,$in0,$key + bdnz Loop128 + + lvx $rcon,0,$ptr # last two round keys + + vperm $key,$in0,$in0,$mask # rotate-n-splat + vsldoi $tmp,$zero,$in0,12 # >>32 + vperm $outtail,$in0,$in0,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + vcipherlast $key,$key,$rcon + stvx $stage,0,$out + addi $out,$out,16 + + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + vadduwm $rcon,$rcon,$rcon + vxor $in0,$in0,$key + + vperm $key,$in0,$in0,$mask # rotate-n-splat + vsldoi $tmp,$zero,$in0,12 # >>32 + vperm $outtail,$in0,$in0,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + vcipherlast $key,$key,$rcon + stvx $stage,0,$out + addi $out,$out,16 + + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + vxor $in0,$in0,$key + vperm $outtail,$in0,$in0,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + stvx $stage,0,$out + + addi $inp,$out,15 # 15 is not typo + addi $out,$out,0x50 + + li $rounds,10 + b Ldone + +.align 4 +L192: + lvx $tmp,0,$inp + li $cnt,4 + vperm $outtail,$in0,$in0,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + stvx $stage,0,$out + addi $out,$out,16 + vperm $in1,$in1,$tmp,$key # align [and byte swap in LE] + vspltisb $key,8 # borrow $key + mtctr $cnt + vsububm $mask,$mask,$key # adjust the mask + +Loop192: + vperm $key,$in1,$in1,$mask # roate-n-splat + vsldoi $tmp,$zero,$in0,12 # >>32 + vcipherlast $key,$key,$rcon + + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + + vsldoi $stage,$zero,$in1,8 + vspltw $tmp,$in0,3 + vxor $tmp,$tmp,$in1 + vsldoi $in1,$zero,$in1,12 # >>32 + vadduwm $rcon,$rcon,$rcon + vxor $in1,$in1,$tmp + vxor $in0,$in0,$key + vxor $in1,$in1,$key + vsldoi $stage,$stage,$in0,8 + + vperm $key,$in1,$in1,$mask # rotate-n-splat + vsldoi $tmp,$zero,$in0,12 # >>32 + vperm $outtail,$stage,$stage,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + vcipherlast $key,$key,$rcon + stvx $stage,0,$out + addi $out,$out,16 + + vsldoi $stage,$in0,$in1,8 + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vperm $outtail,$stage,$stage,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + stvx $stage,0,$out + addi $out,$out,16 + + vspltw $tmp,$in0,3 + vxor $tmp,$tmp,$in1 + vsldoi $in1,$zero,$in1,12 # >>32 + vadduwm $rcon,$rcon,$rcon + vxor $in1,$in1,$tmp + vxor $in0,$in0,$key + vxor $in1,$in1,$key + vperm $outtail,$in0,$in0,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + stvx $stage,0,$out + addi $inp,$out,15 # 15 is not typo + addi $out,$out,16 + bdnz Loop192 + + li $rounds,12 + addi $out,$out,0x20 + b Ldone + +.align 4 +L256: + lvx $tmp,0,$inp + li $cnt,7 + li $rounds,14 + vperm $outtail,$in0,$in0,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + stvx $stage,0,$out + addi $out,$out,16 + vperm $in1,$in1,$tmp,$key # align [and byte swap in LE] + mtctr $cnt + +Loop256: + vperm $key,$in1,$in1,$mask # rotate-n-splat + vsldoi $tmp,$zero,$in0,12 # >>32 + vperm $outtail,$in1,$in1,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + vcipherlast $key,$key,$rcon + stvx $stage,0,$out + addi $out,$out,16 + + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in0,$in0,$tmp + vadduwm $rcon,$rcon,$rcon + vxor $in0,$in0,$key + vperm $outtail,$in0,$in0,$outperm # rotate + vsel $stage,$outhead,$outtail,$outmask + vmr $outhead,$outtail + stvx $stage,0,$out + addi $inp,$out,15 # 15 is not typo + addi $out,$out,16 + bdz Ldone + + vspltw $key,$in0,3 # just splat + vsldoi $tmp,$zero,$in1,12 # >>32 + vsbox $key,$key + + vxor $in1,$in1,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in1,$in1,$tmp + vsldoi $tmp,$zero,$tmp,12 # >>32 + vxor $in1,$in1,$tmp + + vxor $in1,$in1,$key + b Loop256 + +.align 4 +Ldone: + lvx $in1,0,$inp # redundant in aligned case + vsel $in1,$outhead,$in1,$outmask + stvx $in1,0,$inp + li $ptr,0 + mtspr 256,$vrsave + stw $rounds,0($out) + +Lenc_key_abort: + mr r3,$ptr + blr + .long 0 + .byte 0,12,0x14,1,0,0,3,0 + .long 0 +.size .${prefix}_set_encrypt_key,.-.${prefix}_set_encrypt_key + +.globl .${prefix}_set_decrypt_key + $STU $sp,-$FRAME($sp) + mflr r10 + $PUSH r10,$FRAME+$LRSAVE($sp) + bl Lset_encrypt_key + mtlr r10 + + cmpwi r3,0 + bne- Ldec_key_abort + + slwi $cnt,$rounds,4 + subi $inp,$out,240 # first round key + srwi $rounds,$rounds,1 + add $out,$inp,$cnt # last round key + mtctr $rounds + +Ldeckey: + lwz r0, 0($inp) + lwz r6, 4($inp) + lwz r7, 8($inp) + lwz r8, 12($inp) + addi $inp,$inp,16 + lwz r9, 0($out) + lwz r10,4($out) + lwz r11,8($out) + lwz r12,12($out) + stw r0, 0($out) + stw r6, 4($out) + stw r7, 8($out) + stw r8, 12($out) + subi $out,$out,16 + stw r9, -16($inp) + stw r10,-12($inp) + stw r11,-8($inp) + stw r12,-4($inp) + bdnz Ldeckey + + xor r3,r3,r3 # return value +Ldec_key_abort: + addi $sp,$sp,$FRAME + blr + .long 0 + .byte 0,12,4,1,0x80,0,3,0 + .long 0 +.size .${prefix}_set_decrypt_key,.-.${prefix}_set_decrypt_key +___ +}}} +######################################################################### +{{{ # Single block en- and decrypt procedures # +sub gen_block () { +my $dir = shift; +my $n = $dir eq "de" ? "n" : ""; +my ($inp,$out,$key,$rounds,$idx)=map("r$_",(3..7)); + +$code.=<<___; +.globl .${prefix}_${dir}crypt + lwz $rounds,240($key) + lis r0,0xfc00 + mfspr $vrsave,256 + li $idx,15 # 15 is not typo + mtspr 256,r0 + + lvx v0,0,$inp + neg r11,$out + lvx v1,$idx,$inp + lvsl v2,0,$inp # inpperm + le?vspltisb v4,0x0f + ?lvsl v3,0,r11 # outperm + le?vxor v2,v2,v4 + li $idx,16 + vperm v0,v0,v1,v2 # align [and byte swap in LE] + lvx v1,0,$key + ?lvsl v5,0,$key # keyperm + srwi $rounds,$rounds,1 + lvx v2,$idx,$key + addi $idx,$idx,16 + subi $rounds,$rounds,1 + ?vperm v1,v1,v2,v5 # align round key + + vxor v0,v0,v1 + lvx v1,$idx,$key + addi $idx,$idx,16 + mtctr $rounds + +Loop_${dir}c: + ?vperm v2,v2,v1,v5 + v${n}cipher v0,v0,v2 + lvx v2,$idx,$key + addi $idx,$idx,16 + ?vperm v1,v1,v2,v5 + v${n}cipher v0,v0,v1 + lvx v1,$idx,$key + addi $idx,$idx,16 + bdnz Loop_${dir}c + + ?vperm v2,v2,v1,v5 + v${n}cipher v0,v0,v2 + lvx v2,$idx,$key + ?vperm v1,v1,v2,v5 + v${n}cipherlast v0,v0,v1 + + vspltisb v2,-1 + vxor v1,v1,v1 + li $idx,15 # 15 is not typo + ?vperm v2,v1,v2,v3 # outmask + le?vxor v3,v3,v4 + lvx v1,0,$out # outhead + vperm v0,v0,v0,v3 # rotate [and byte swap in LE] + vsel v1,v1,v0,v2 + lvx v4,$idx,$out + stvx v1,0,$out + vsel v0,v0,v4,v2 + stvx v0,$idx,$out + + mtspr 256,$vrsave + blr + .long 0 + .byte 0,12,0x14,0,0,0,3,0 + .long 0 +.size .${prefix}_${dir}crypt,.-.${prefix}_${dir}crypt +___ +} +&gen_block("en"); +&gen_block("de"); +}}} + +my $consts=1; +foreach(split("\n",$code)) { + s/\`([^\`]*)\`/eval($1)/geo; + + # constants table endian-specific conversion + if ($consts && m/\.(long|byte)\s+(.+)\s+(\?[a-z]*)$/o) { + my $conv=$3; + my @bytes=(); + + # convert to endian-agnostic format + if ($1 eq "long") { + foreach (split(/,\s*/,$2)) { + my $l = /^0/?oct:int; + push @bytes,($l>>24)&0xff,($l>>16)&0xff,($l>>8)&0xff,$l&0xff; + } + } else { + @bytes = map(/^0/?oct:int,split(/,\s*/,$2)); + } + + # little-endian conversion + if ($flavour =~ /le$/o) { + SWITCH: for($conv) { + /\?inv/ && do { @bytes=map($_^0xf,@bytes); last; }; + /\?rev/ && do { @bytes=reverse(@bytes); last; }; + } + } + + #emit + print ".byte\t",join(',',map (sprintf("0x%02x",$_),@bytes)),"\n"; + next; + } + $consts=0 if (m/Lconsts:/o); # end of table + + # instructions prefixed with '?' are endian-specific and need + # to be adjusted accordingly... + if ($flavour =~ /le$/o) { # little-endian + s/le\?//o or + s/be\?/#be#/o or + s/\?lvsr/lvsl/o or + s/\?lvsl/lvsr/o or + s/\?(vperm\s+v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+)/$1$3$2$4/o or + s/\?(vsldoi\s+v[0-9]+,\s*)(v[0-9]+,)\s*(v[0-9]+,\s*)([0-9]+)/$1$3$2 16-$4/o or + s/\?(vspltw\s+v[0-9]+,\s*)(v[0-9]+,)\s*([0-9])/$1$2 3-$3/o; + } else { # big-endian + s/le\?/#le#/o or + s/be\?//o or + s/\?([a-z]+)/$1/o; + } + + print $_,"\n"; +} + +close STDOUT; diff --git a/arch/powerpc/crypto/ghashp8-ppc.pl b/arch/powerpc/crypto/ghashp8-ppc.pl new file mode 100644 index 000000000000..b56603b4a893 --- /dev/null +++ b/arch/powerpc/crypto/ghashp8-ppc.pl @@ -0,0 +1,370 @@ +#!/usr/bin/env perl +# SPDX-License-Identifier: GPL-2.0 + +# This code is taken from the OpenSSL project but the author (Andy Polyakov) +# has relicensed it under the GPLv2. Therefore this program is free software; +# you can redistribute it and/or modify it under the terms of the GNU General +# Public License version 2 as published by the Free Software Foundation. +# +# The original headers, including the original license headers, are +# included below for completeness. + +# ==================================================================== +# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see https://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# GHASH for PowerISA v2.07. +# +# July 2014 +# +# Accurate performance measurements are problematic, because it's +# always virtualized setup with possibly throttled processor. +# Relative comparison is therefore more informative. This initial +# version is ~2.1x slower than hardware-assisted AES-128-CTR, ~12x +# faster than "4-bit" integer-only compiler-generated 64-bit code. +# "Initial version" means that there is room for futher improvement. + +$flavour=shift; +$output =shift; + +if ($flavour =~ /64/) { + $SIZE_T=8; + $LRSAVE=2*$SIZE_T; + $STU="stdu"; + $POP="ld"; + $PUSH="std"; +} elsif ($flavour =~ /32/) { + $SIZE_T=4; + $LRSAVE=$SIZE_T; + $STU="stwu"; + $POP="lwz"; + $PUSH="stw"; +} else { die "nonsense $flavour"; } + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or +die "can't locate ppc-xlate.pl"; + +open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!"; + +my ($Xip,$Htbl,$inp,$len)=map("r$_",(3..6)); # argument block + +my ($Xl,$Xm,$Xh,$IN)=map("v$_",(0..3)); +my ($zero,$t0,$t1,$t2,$xC2,$H,$Hh,$Hl,$lemask)=map("v$_",(4..12)); +my ($Xl1,$Xm1,$Xh1,$IN1,$H2,$H2h,$H2l)=map("v$_",(13..19)); +my $vrsave="r12"; +my ($t4,$t5,$t6) = ($Hl,$H,$Hh); + +$code=<<___; +.machine "any" + +.text + +.globl .gcm_init_p8 + lis r0,0xfff0 + li r8,0x10 + mfspr $vrsave,256 + li r9,0x20 + mtspr 256,r0 + li r10,0x30 + lvx_u $H,0,r4 # load H + le?xor r7,r7,r7 + le?addi r7,r7,0x8 # need a vperm start with 08 + le?lvsr 5,0,r7 + le?vspltisb 6,0x0f + le?vxor 5,5,6 # set a b-endian mask + le?vperm $H,$H,$H,5 + + vspltisb $xC2,-16 # 0xf0 + vspltisb $t0,1 # one + vaddubm $xC2,$xC2,$xC2 # 0xe0 + vxor $zero,$zero,$zero + vor $xC2,$xC2,$t0 # 0xe1 + vsldoi $xC2,$xC2,$zero,15 # 0xe1... + vsldoi $t1,$zero,$t0,1 # ...1 + vaddubm $xC2,$xC2,$xC2 # 0xc2... + vspltisb $t2,7 + vor $xC2,$xC2,$t1 # 0xc2....01 + vspltb $t1,$H,0 # most significant byte + vsl $H,$H,$t0 # H<<=1 + vsrab $t1,$t1,$t2 # broadcast carry bit + vand $t1,$t1,$xC2 + vxor $H,$H,$t1 # twisted H + + vsldoi $H,$H,$H,8 # twist even more ... + vsldoi $xC2,$zero,$xC2,8 # 0xc2.0 + vsldoi $Hl,$zero,$H,8 # ... and split + vsldoi $Hh,$H,$zero,8 + + stvx_u $xC2,0,r3 # save pre-computed table + stvx_u $Hl,r8,r3 + stvx_u $H, r9,r3 + stvx_u $Hh,r10,r3 + + mtspr 256,$vrsave + blr + .long 0 + .byte 0,12,0x14,0,0,0,2,0 + .long 0 +.size .gcm_init_p8,.-.gcm_init_p8 + +.globl .gcm_init_htable + lis r0,0xfff0 + li r8,0x10 + mfspr $vrsave,256 + li r9,0x20 + mtspr 256,r0 + li r10,0x30 + lvx_u $H,0,r4 # load H + + vspltisb $xC2,-16 # 0xf0 + vspltisb $t0,1 # one + vaddubm $xC2,$xC2,$xC2 # 0xe0 + vxor $zero,$zero,$zero + vor $xC2,$xC2,$t0 # 0xe1 + vsldoi $xC2,$xC2,$zero,15 # 0xe1... + vsldoi $t1,$zero,$t0,1 # ...1 + vaddubm $xC2,$xC2,$xC2 # 0xc2... + vspltisb $t2,7 + vor $xC2,$xC2,$t1 # 0xc2....01 + vspltb $t1,$H,0 # most significant byte + vsl $H,$H,$t0 # H<<=1 + vsrab $t1,$t1,$t2 # broadcast carry bit + vand $t1,$t1,$xC2 + vxor $IN,$H,$t1 # twisted H + + vsldoi $H,$IN,$IN,8 # twist even more ... + vsldoi $xC2,$zero,$xC2,8 # 0xc2.0 + vsldoi $Hl,$zero,$H,8 # ... and split + vsldoi $Hh,$H,$zero,8 + + stvx_u $xC2,0,r3 # save pre-computed table + stvx_u $Hl,r8,r3 + li r8,0x40 + stvx_u $H, r9,r3 + li r9,0x50 + stvx_u $Hh,r10,r3 + li r10,0x60 + + vpmsumd $Xl,$IN,$Hl # H.lo·H.lo + vpmsumd $Xm,$IN,$H # H.hi·H.lo+H.lo·H.hi + vpmsumd $Xh,$IN,$Hh # H.hi·H.hi + + vpmsumd $t2,$Xl,$xC2 # 1st reduction phase + + vsldoi $t0,$Xm,$zero,8 + vsldoi $t1,$zero,$Xm,8 + vxor $Xl,$Xl,$t0 + vxor $Xh,$Xh,$t1 + + vsldoi $Xl,$Xl,$Xl,8 + vxor $Xl,$Xl,$t2 + + vsldoi $t1,$Xl,$Xl,8 # 2nd reduction phase + vpmsumd $Xl,$Xl,$xC2 + vxor $t1,$t1,$Xh + vxor $IN1,$Xl,$t1 + + vsldoi $H2,$IN1,$IN1,8 + vsldoi $H2l,$zero,$H2,8 + vsldoi $H2h,$H2,$zero,8 + + stvx_u $H2l,r8,r3 # save H^2 + li r8,0x70 + stvx_u $H2,r9,r3 + li r9,0x80 + stvx_u $H2h,r10,r3 + li r10,0x90 + + vpmsumd $Xl,$IN,$H2l # H.lo·H^2.lo + vpmsumd $Xl1,$IN1,$H2l # H^2.lo·H^2.lo + vpmsumd $Xm,$IN,$H2 # H.hi·H^2.lo+H.lo·H^2.hi + vpmsumd $Xm1,$IN1,$H2 # H^2.hi·H^2.lo+H^2.lo·H^2.hi + vpmsumd $Xh,$IN,$H2h # H.hi·H^2.hi + vpmsumd $Xh1,$IN1,$H2h # H^2.hi·H^2.hi + + vpmsumd $t2,$Xl,$xC2 # 1st reduction phase + vpmsumd $t6,$Xl1,$xC2 # 1st reduction phase + + vsldoi $t0,$Xm,$zero,8 + vsldoi $t1,$zero,$Xm,8 + vsldoi $t4,$Xm1,$zero,8 + vsldoi $t5,$zero,$Xm1,8 + vxor $Xl,$Xl,$t0 + vxor $Xh,$Xh,$t1 + vxor $Xl1,$Xl1,$t4 + vxor $Xh1,$Xh1,$t5 + + vsldoi $Xl,$Xl,$Xl,8 + vsldoi $Xl1,$Xl1,$Xl1,8 + vxor $Xl,$Xl,$t2 + vxor $Xl1,$Xl1,$t6 + + vsldoi $t1,$Xl,$Xl,8 # 2nd reduction phase + vsldoi $t5,$Xl1,$Xl1,8 # 2nd reduction phase + vpmsumd $Xl,$Xl,$xC2 + vpmsumd $Xl1,$Xl1,$xC2 + vxor $t1,$t1,$Xh + vxor $t5,$t5,$Xh1 + vxor $Xl,$Xl,$t1 + vxor $Xl1,$Xl1,$t5 + + vsldoi $H,$Xl,$Xl,8 + vsldoi $H2,$Xl1,$Xl1,8 + vsldoi $Hl,$zero,$H,8 + vsldoi $Hh,$H,$zero,8 + vsldoi $H2l,$zero,$H2,8 + vsldoi $H2h,$H2,$zero,8 + + stvx_u $Hl,r8,r3 # save H^3 + li r8,0xa0 + stvx_u $H,r9,r3 + li r9,0xb0 + stvx_u $Hh,r10,r3 + li r10,0xc0 + stvx_u $H2l,r8,r3 # save H^4 + stvx_u $H2,r9,r3 + stvx_u $H2h,r10,r3 + + mtspr 256,$vrsave + blr + .long 0 + .byte 0,12,0x14,0,0,0,2,0 + .long 0 +.size .gcm_init_htable,.-.gcm_init_htable + +.globl .gcm_gmult_p8 + lis r0,0xfff8 + li r8,0x10 + mfspr $vrsave,256 + li r9,0x20 + mtspr 256,r0 + li r10,0x30 + lvx_u $IN,0,$Xip # load Xi + + lvx_u $Hl,r8,$Htbl # load pre-computed table + le?lvsl $lemask,r0,r0 + lvx_u $H, r9,$Htbl + le?vspltisb $t0,0x07 + lvx_u $Hh,r10,$Htbl + le?vxor $lemask,$lemask,$t0 + lvx_u $xC2,0,$Htbl + le?vperm $IN,$IN,$IN,$lemask + vxor $zero,$zero,$zero + + vpmsumd $Xl,$IN,$Hl # H.lo·Xi.lo + vpmsumd $Xm,$IN,$H # H.hi·Xi.lo+H.lo·Xi.hi + vpmsumd $Xh,$IN,$Hh # H.hi·Xi.hi + + vpmsumd $t2,$Xl,$xC2 # 1st phase + + vsldoi $t0,$Xm,$zero,8 + vsldoi $t1,$zero,$Xm,8 + vxor $Xl,$Xl,$t0 + vxor $Xh,$Xh,$t1 + + vsldoi $Xl,$Xl,$Xl,8 + vxor $Xl,$Xl,$t2 + + vsldoi $t1,$Xl,$Xl,8 # 2nd phase + vpmsumd $Xl,$Xl,$xC2 + vxor $t1,$t1,$Xh + vxor $Xl,$Xl,$t1 + + le?vperm $Xl,$Xl,$Xl,$lemask + stvx_u $Xl,0,$Xip # write out Xi + + mtspr 256,$vrsave + blr + .long 0 + .byte 0,12,0x14,0,0,0,2,0 + .long 0 +.size .gcm_gmult_p8,.-.gcm_gmult_p8 + +.globl .gcm_ghash_p8 + lis r0,0xfff8 + li r8,0x10 + mfspr $vrsave,256 + li r9,0x20 + mtspr 256,r0 + li r10,0x30 + lvx_u $Xl,0,$Xip # load Xi + + lvx_u $Hl,r8,$Htbl # load pre-computed table + le?lvsl $lemask,r0,r0 + lvx_u $H, r9,$Htbl + le?vspltisb $t0,0x07 + lvx_u $Hh,r10,$Htbl + le?vxor $lemask,$lemask,$t0 + lvx_u $xC2,0,$Htbl + le?vperm $Xl,$Xl,$Xl,$lemask + vxor $zero,$zero,$zero + + lvx_u $IN,0,$inp + addi $inp,$inp,16 + subi $len,$len,16 + le?vperm $IN,$IN,$IN,$lemask + vxor $IN,$IN,$Xl + b Loop + +.align 5 +Loop: + subic $len,$len,16 + vpmsumd $Xl,$IN,$Hl # H.lo·Xi.lo + subfe. r0,r0,r0 # borrow?-1:0 + vpmsumd $Xm,$IN,$H # H.hi·Xi.lo+H.lo·Xi.hi + and r0,r0,$len + vpmsumd $Xh,$IN,$Hh # H.hi·Xi.hi + add $inp,$inp,r0 + + vpmsumd $t2,$Xl,$xC2 # 1st phase + + vsldoi $t0,$Xm,$zero,8 + vsldoi $t1,$zero,$Xm,8 + vxor $Xl,$Xl,$t0 + vxor $Xh,$Xh,$t1 + + vsldoi $Xl,$Xl,$Xl,8 + vxor $Xl,$Xl,$t2 + lvx_u $IN,0,$inp + addi $inp,$inp,16 + + vsldoi $t1,$Xl,$Xl,8 # 2nd phase + vpmsumd $Xl,$Xl,$xC2 + le?vperm $IN,$IN,$IN,$lemask + vxor $t1,$t1,$Xh + vxor $IN,$IN,$t1 + vxor $IN,$IN,$Xl + beq Loop # did $len-=16 borrow? + + vxor $Xl,$Xl,$t1 + le?vperm $Xl,$Xl,$Xl,$lemask + stvx_u $Xl,0,$Xip # write out Xi + + mtspr 256,$vrsave + blr + .long 0 + .byte 0,12,0x14,0,0,0,4,0 + .long 0 +.size .gcm_ghash_p8,.-.gcm_ghash_p8 + +.asciz "GHASH for PowerISA 2.07, CRYPTOGAMS by <appro\@openssl.org>" +.align 2 +___ + +foreach (split("\n",$code)) { + if ($flavour =~ /le$/o) { # little-endian + s/le\?//o or + s/be\?/#be#/o; + } else { + s/le\?/#le#/o or + s/be\?//o; + } + print $_,"\n"; +} + +close STDOUT; # enforce flush diff --git a/arch/powerpc/crypto/ppc-xlate.pl b/arch/powerpc/crypto/ppc-xlate.pl new file mode 100644 index 000000000000..23cca703ce29 --- /dev/null +++ b/arch/powerpc/crypto/ppc-xlate.pl @@ -0,0 +1,229 @@ +#!/usr/bin/env perl +# SPDX-License-Identifier: GPL-2.0 + +# PowerPC assembler distiller by <appro>. + +my $flavour = shift; +my $output = shift; +open STDOUT,">$output" || die "can't open $output: $!"; + +my %GLOBALS; +my $dotinlocallabels=($flavour=~/linux/)?1:0; + +################################################################ +# directives which need special treatment on different platforms +################################################################ +my $globl = sub { + my $junk = shift; + my $name = shift; + my $global = \$GLOBALS{$name}; + my $ret; + + $name =~ s|^[\.\_]||; + + SWITCH: for ($flavour) { + /aix/ && do { $name = ".$name"; + last; + }; + /osx/ && do { $name = "_$name"; + last; + }; + /linux/ + && do { $ret = "_GLOBAL($name)"; + last; + }; + } + + $ret = ".globl $name\nalign 5\n$name:" if (!$ret); + $$global = $name; + $ret; +}; +my $text = sub { + my $ret = ($flavour =~ /aix/) ? ".csect\t.text[PR],7" : ".text"; + $ret = ".abiversion 2\n".$ret if ($flavour =~ /linux.*64le/); + $ret; +}; +my $machine = sub { + my $junk = shift; + my $arch = shift; + if ($flavour =~ /osx/) + { $arch =~ s/\"//g; + $arch = ($flavour=~/64/) ? "ppc970-64" : "ppc970" if ($arch eq "any"); + } + ".machine $arch"; +}; +my $size = sub { + if ($flavour =~ /linux/) + { shift; + my $name = shift; $name =~ s|^[\.\_]||; + my $ret = ".size $name,.-".($flavour=~/64$/?".":"").$name; + $ret .= "\n.size .$name,.-.$name" if ($flavour=~/64$/); + $ret; + } + else + { ""; } +}; +my $asciz = sub { + shift; + my $line = join(",",@_); + if ($line =~ /^"(.*)"$/) + { ".byte " . join(",",unpack("C*",$1),0) . "\n.align 2"; } + else + { ""; } +}; +my $quad = sub { + shift; + my @ret; + my ($hi,$lo); + for (@_) { + if (/^0x([0-9a-f]*?)([0-9a-f]{1,8})$/io) + { $hi=$1?"0x$1":"0"; $lo="0x$2"; } + elsif (/^([0-9]+)$/o) + { $hi=$1>>32; $lo=$1&0xffffffff; } # error-prone with 32-bit perl + else + { $hi=undef; $lo=$_; } + + if (defined($hi)) + { push(@ret,$flavour=~/le$/o?".long\t$lo,$hi":".long\t$hi,$lo"); } + else + { push(@ret,".quad $lo"); } + } + join("\n",@ret); +}; + +################################################################ +# simplified mnemonics not handled by at least one assembler +################################################################ +my $cmplw = sub { + my $f = shift; + my $cr = 0; $cr = shift if ($#_>1); + # Some out-of-date 32-bit GNU assembler just can't handle cmplw... + ($flavour =~ /linux.*32/) ? + " .long ".sprintf "0x%x",31<<26|$cr<<23|$_[0]<<16|$_[1]<<11|64 : + " cmplw ".join(',',$cr,@_); +}; +my $bdnz = sub { + my $f = shift; + my $bo = $f=~/[\+\-]/ ? 16+9 : 16; # optional "to be taken" hint + " bc $bo,0,".shift; +} if ($flavour!~/linux/); +my $bltlr = sub { + my $f = shift; + my $bo = $f=~/\-/ ? 12+2 : 12; # optional "not to be taken" hint + ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints + " .long ".sprintf "0x%x",19<<26|$bo<<21|16<<1 : + " bclr $bo,0"; +}; +my $bnelr = sub { + my $f = shift; + my $bo = $f=~/\-/ ? 4+2 : 4; # optional "not to be taken" hint + ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints + " .long ".sprintf "0x%x",19<<26|$bo<<21|2<<16|16<<1 : + " bclr $bo,2"; +}; +my $beqlr = sub { + my $f = shift; + my $bo = $f=~/-/ ? 12+2 : 12; # optional "not to be taken" hint + ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints + " .long ".sprintf "0x%X",19<<26|$bo<<21|2<<16|16<<1 : + " bclr $bo,2"; +}; +# GNU assembler can't handle extrdi rA,rS,16,48, or when sum of last two +# arguments is 64, with "operand out of range" error. +my $extrdi = sub { + my ($f,$ra,$rs,$n,$b) = @_; + $b = ($b+$n)&63; $n = 64-$n; + " rldicl $ra,$rs,$b,$n"; +}; +my $vmr = sub { + my ($f,$vx,$vy) = @_; + " vor $vx,$vy,$vy"; +}; + +# Some ABIs specify vrsave, special-purpose register #256, as reserved +# for system use. +my $no_vrsave = ($flavour =~ /linux-ppc64le/); +my $mtspr = sub { + my ($f,$idx,$ra) = @_; + if ($idx == 256 && $no_vrsave) { + " or $ra,$ra,$ra"; + } else { + " mtspr $idx,$ra"; + } +}; +my $mfspr = sub { + my ($f,$rd,$idx) = @_; + if ($idx == 256 && $no_vrsave) { + " li $rd,-1"; + } else { + " mfspr $rd,$idx"; + } +}; + +# PowerISA 2.06 stuff +sub vsxmem_op { + my ($f, $vrt, $ra, $rb, $op) = @_; + " .long ".sprintf "0x%X",(31<<26)|($vrt<<21)|($ra<<16)|($rb<<11)|($op*2+1); +} +# made-up unaligned memory reference AltiVec/VMX instructions +my $lvx_u = sub { vsxmem_op(@_, 844); }; # lxvd2x +my $stvx_u = sub { vsxmem_op(@_, 972); }; # stxvd2x +my $lvdx_u = sub { vsxmem_op(@_, 588); }; # lxsdx +my $stvdx_u = sub { vsxmem_op(@_, 716); }; # stxsdx +my $lvx_4w = sub { vsxmem_op(@_, 780); }; # lxvw4x +my $stvx_4w = sub { vsxmem_op(@_, 908); }; # stxvw4x + +# PowerISA 2.07 stuff +sub vcrypto_op { + my ($f, $vrt, $vra, $vrb, $op) = @_; + " .long ".sprintf "0x%X",(4<<26)|($vrt<<21)|($vra<<16)|($vrb<<11)|$op; +} +my $vcipher = sub { vcrypto_op(@_, 1288); }; +my $vcipherlast = sub { vcrypto_op(@_, 1289); }; +my $vncipher = sub { vcrypto_op(@_, 1352); }; +my $vncipherlast= sub { vcrypto_op(@_, 1353); }; +my $vsbox = sub { vcrypto_op(@_, 0, 1480); }; +my $vshasigmad = sub { my ($st,$six)=splice(@_,-2); vcrypto_op(@_, $st<<4|$six, 1730); }; +my $vshasigmaw = sub { my ($st,$six)=splice(@_,-2); vcrypto_op(@_, $st<<4|$six, 1666); }; +my $vpmsumb = sub { vcrypto_op(@_, 1032); }; +my $vpmsumd = sub { vcrypto_op(@_, 1224); }; +my $vpmsubh = sub { vcrypto_op(@_, 1096); }; +my $vpmsumw = sub { vcrypto_op(@_, 1160); }; +my $vaddudm = sub { vcrypto_op(@_, 192); }; +my $vadduqm = sub { vcrypto_op(@_, 256); }; + +my $mtsle = sub { + my ($f, $arg) = @_; + " .long ".sprintf "0x%X",(31<<26)|($arg<<21)|(147*2); +}; + +print "#include <asm/ppc_asm.h>\n" if $flavour =~ /linux/; + +while($line=<>) { + + $line =~ s|[#!;].*$||; # get rid of asm-style comments... + $line =~ s|/\*.*\*/||; # ... and C-style comments... + $line =~ s|^\s+||; # ... and skip white spaces in beginning... + $line =~ s|\s+$||; # ... and at the end + + { + $line =~ s|\b\.L(\w+)|L$1|g; # common denominator for Locallabel + $line =~ s|\bL(\w+)|\.L$1|g if ($dotinlocallabels); + } + + { + $line =~ s|^\s*(\.?)(\w+)([\.\+\-]?)\s*||; + my $c = $1; $c = "\t" if ($c eq ""); + my $mnemonic = $2; + my $f = $3; + my $opcode = eval("\$$mnemonic"); + $line =~ s/\b(c?[rf]|v|vs)([0-9]+)\b/$2/g if ($c ne "." and $flavour !~ /osx/); + if (ref($opcode) eq 'CODE') { $line = &$opcode($f,split(',',$line)); } + elsif ($mnemonic) { $line = $c.$mnemonic.$f."\t".$line; } + } + + print $line if ($line); + print "\n"; +} + +close STDOUT; diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h index 2bbc0fcce04a..5e26c7f2c25a 100644 --- a/arch/powerpc/include/asm/book3s/64/tlbflush.h +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h @@ -148,6 +148,11 @@ static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma, */ } +static inline bool __pte_protnone(unsigned long pte) +{ + return (pte & (pgprot_val(PAGE_NONE) | _PAGE_RWX)) == pgprot_val(PAGE_NONE); +} + static inline bool __pte_flags_need_flush(unsigned long oldval, unsigned long newval) { @@ -164,8 +169,8 @@ static inline bool __pte_flags_need_flush(unsigned long oldval, /* * We do not expect kernel mappings or non-PTEs or not-present PTEs. */ - VM_WARN_ON_ONCE(oldval & _PAGE_PRIVILEGED); - VM_WARN_ON_ONCE(newval & _PAGE_PRIVILEGED); + VM_WARN_ON_ONCE(!__pte_protnone(oldval) && oldval & _PAGE_PRIVILEGED); + VM_WARN_ON_ONCE(!__pte_protnone(newval) && newval & _PAGE_PRIVILEGED); VM_WARN_ON_ONCE(!(oldval & _PAGE_PTE)); VM_WARN_ON_ONCE(!(newval & _PAGE_PTE)); VM_WARN_ON_ONCE(!(oldval & _PAGE_PRESENT)); diff --git a/arch/powerpc/include/asm/cpufeature.h b/arch/powerpc/include/asm/cpufeature.h index f6f790a90367..2dcc66225e7f 100644 --- a/arch/powerpc/include/asm/cpufeature.h +++ b/arch/powerpc/include/asm/cpufeature.h @@ -22,6 +22,7 @@ */ #define PPC_MODULE_FEATURE_VEC_CRYPTO (32 + ilog2(PPC_FEATURE2_VEC_CRYPTO)) +#define PPC_MODULE_FEATURE_P10 (32 + ilog2(PPC_FEATURE2_ARCH_3_1)) #define cpu_feature(x) (x) diff --git a/arch/powerpc/include/asm/kasan.h b/arch/powerpc/include/asm/kasan.h index 92a968202ba7..365d2720097c 100644 --- a/arch/powerpc/include/asm/kasan.h +++ b/arch/powerpc/include/asm/kasan.h @@ -2,7 +2,7 @@ #ifndef __ASM_KASAN_H #define __ASM_KASAN_H -#ifdef CONFIG_KASAN +#if defined(CONFIG_KASAN) && !defined(CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX) #define _GLOBAL_KASAN(fn) _GLOBAL(__##fn) #define _GLOBAL_TOC_KASAN(fn) _GLOBAL_TOC(__##fn) #define EXPORT_SYMBOL_KASAN(fn) EXPORT_SYMBOL(__##fn) diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h index 2aa0e31e6884..60ba22770f51 100644 --- a/arch/powerpc/include/asm/string.h +++ b/arch/powerpc/include/asm/string.h @@ -30,11 +30,17 @@ extern int memcmp(const void *,const void *,__kernel_size_t); extern void * memchr(const void *,int,__kernel_size_t); void memcpy_flushcache(void *dest, const void *src, size_t size); +#ifdef CONFIG_KASAN +/* __mem variants are used by KASAN to implement instrumented meminstrinsics. */ +#ifdef CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX +#define __memset memset +#define __memcpy memcpy +#define __memmove memmove +#else /* CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX */ void *__memset(void *s, int c, __kernel_size_t count); void *__memcpy(void *to, const void *from, __kernel_size_t n); void *__memmove(void *to, const void *from, __kernel_size_t n); - -#if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__) +#ifndef __SANITIZE_ADDRESS__ /* * For files that are not instrumented (e.g. mm/slub.c) we * should use not instrumented version of mem* functions. @@ -46,8 +52,9 @@ void *__memmove(void *to, const void *from, __kernel_size_t n); #ifndef __NO_FORTIFY #define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */ #endif - -#endif +#endif /* !__SANITIZE_ADDRESS__ */ +#endif /* CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX */ +#endif /* CONFIG_KASAN */ #ifdef CONFIG_PPC64 #ifndef CONFIG_KASAN diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index 5a319863f289..69623b9045d5 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -13,8 +13,13 @@ # If you really need to reference something from prom_init.o add # it to the list below: -grep "^CONFIG_KASAN=y$" ${KCONFIG_CONFIG} >/dev/null -if [ $? -eq 0 ] +has_renamed_memintrinsics() +{ + grep -q "^CONFIG_KASAN=y$" ${KCONFIG_CONFIG} && \ + ! grep -q "^CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX=y" ${KCONFIG_CONFIG} +} + +if has_renamed_memintrinsics then MEM_FUNCS="__memcpy __memset" else diff --git a/arch/powerpc/kernel/ptrace/ptrace-view.c b/arch/powerpc/kernel/ptrace/ptrace-view.c index 2087a785f05f..5fff0d04b23f 100644 --- a/arch/powerpc/kernel/ptrace/ptrace-view.c +++ b/arch/powerpc/kernel/ptrace/ptrace-view.c @@ -290,6 +290,9 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset, static int ppr_get(struct task_struct *target, const struct user_regset *regset, struct membuf to) { + if (!target->thread.regs) + return -EINVAL; + return membuf_write(&to, &target->thread.regs->ppr, sizeof(u64)); } @@ -297,6 +300,9 @@ static int ppr_set(struct task_struct *target, const struct user_regset *regset, unsigned int pos, unsigned int count, const void *kbuf, const void __user *ubuf) { + if (!target->thread.regs) + return -EINVAL; + return user_regset_copyin(&pos, &count, &kbuf, &ubuf, &target->thread.regs->ppr, 0, sizeof(u64)); } diff --git a/arch/powerpc/kernel/vdso/Makefile b/arch/powerpc/kernel/vdso/Makefile index 66f723f53be2..4c3f34485f08 100644 --- a/arch/powerpc/kernel/vdso/Makefile +++ b/arch/powerpc/kernel/vdso/Makefile @@ -2,7 +2,7 @@ # List of files in the vdso, has to be asm only for now -ARCH_REL_TYPE_ABS := R_PPC_JUMP_SLOT|R_PPC_GLOB_DAT|R_PPC_ADDR32|R_PPC_ADDR24|R_PPC_ADDR16|R_PPC_ADDR16_LO|R_PPC_ADDR16_HI|R_PPC_ADDR16_HA|R_PPC_ADDR14|R_PPC_ADDR14_BRTAKEN|R_PPC_ADDR14_BRNTAKEN|R_PPC_REL24 +# Include the generic Makefile to check the built vdso. include $(srctree)/lib/vdso/Makefile obj-vdso32 = sigtramp32-32.o gettimeofday-32.o datapage-32.o cacheflush-32.o note-32.o getcpu-32.o diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig index a9f57dad6d91..902611954200 100644 --- a/arch/powerpc/kvm/Kconfig +++ b/arch/powerpc/kvm/Kconfig @@ -22,7 +22,6 @@ config KVM select PREEMPT_NOTIFIERS select HAVE_KVM_EVENTFD select HAVE_KVM_VCPU_ASYNC_IOCTL - select SRCU select KVM_VFIO select IRQ_BYPASS_MANAGER select HAVE_KVM_IRQ_BYPASS diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 4c5405fc5538..d23e25e8432d 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -576,6 +576,12 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) break; #endif +#ifdef CONFIG_HAVE_KVM_IRQFD + case KVM_CAP_IRQFD_RESAMPLE: + r = !xive_enabled(); + break; +#endif + case KVM_CAP_PPC_ALLOC_HTAB: r = hv_enabled; break; diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 2bef19cc1b98..af46aa88422b 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -271,11 +271,16 @@ static bool access_error(bool is_write, bool is_exec, struct vm_area_struct *vma } /* - * Check for a read fault. This could be caused by a read on an - * inaccessible page (i.e. PROT_NONE), or a Radix MMU execute-only page. + * VM_READ, VM_WRITE and VM_EXEC all imply read permissions, as + * defined in protection_map[]. Read faults can only be caused by + * a PROT_NONE mapping, or with a PROT_EXEC-only mapping on Radix. */ - if (unlikely(!(vma->vm_flags & VM_READ))) + if (unlikely(!vma_is_accessible(vma))) return true; + + if (unlikely(radix_enabled() && ((vma->vm_flags & VM_ACCESS_FLAGS) == VM_EXEC))) + return true; + /* * We should ideally do the vma pkey access check here. But in the * fault path, handle_mm_fault() also does the same check. To avoid diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index b44ce71917d7..16cfe56be05b 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -366,6 +366,7 @@ void update_numa_distance(struct device_node *node) WARN(numa_distance_table[nid][nid] == -1, "NUMA distance details for node %d not provided\n", nid); } +EXPORT_SYMBOL_GPL(update_numa_distance); /* * ibm,numa-lookup-index-table= {N, domainid1, domainid2, ..... domainidN} diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index 614ea6dc994c..b3c466c50535 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -65,6 +65,7 @@ config PPC4xx_GPIO bool "PPC4xx GPIO support" depends on 40x select GPIOLIB + select OF_GPIO_MM_GPIOCHIP help Enable gpiolib support for ppc40x based boards diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 25b80cd558f8..1624ebf95497 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -230,6 +230,7 @@ config PPC4xx_GPIO bool "PPC4xx GPIO support" depends on 44x select GPIOLIB + select OF_GPIO_MM_GPIOCHIP help Enable gpiolib support for ppc440 based boards diff --git a/arch/powerpc/platforms/4xx/gpio.c b/arch/powerpc/platforms/4xx/gpio.c index 49ee8d365852..e5f2319e5cbe 100644 --- a/arch/powerpc/platforms/4xx/gpio.c +++ b/arch/powerpc/platforms/4xx/gpio.c @@ -14,7 +14,7 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/of.h> -#include <linux/of_gpio.h> +#include <linux/gpio/legacy-of-mm-gpiochip.h> #include <linux/gpio/driver.h> #include <linux/types.h> #include <linux/slab.h> diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 60cc5b537a98..a14d9d8997a4 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -101,6 +101,7 @@ comment "Generic MPC8xx Options" config 8xx_GPIO bool "GPIO API Support" select GPIOLIB + select OF_GPIO_MM_GPIOCHIP help Saying Y here will cause the ports on an MPC8xx processor to be used with the GPIO API. If you say N here, the kernel needs less memory. diff --git a/arch/powerpc/platforms/8xx/cpm1.c b/arch/powerpc/platforms/8xx/cpm1.c index bb38c8d8f8de..56ca14f77543 100644 --- a/arch/powerpc/platforms/8xx/cpm1.c +++ b/arch/powerpc/platforms/8xx/cpm1.c @@ -44,7 +44,7 @@ #include <asm/fs_pd.h> #ifdef CONFIG_8xx_GPIO -#include <linux/of_gpio.h> +#include <linux/gpio/legacy-of-mm-gpiochip.h> #endif #define CPM_MAP_SIZE (0x4000) diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index d41dad227de8..8e4bbd19dec5 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -244,6 +244,7 @@ config QE_GPIO bool "QE GPIO support" depends on QUICC_ENGINE select GPIOLIB + select OF_GPIO_MM_GPIOCHIP help Say Y here if you're going to use hardware that connects to the QE GPIOs. @@ -254,6 +255,7 @@ config CPM2 select CPM select HAVE_PCI select GPIOLIB + select OF_GPIO_MM_GPIOCHIP help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index b481c5c8bae1..21b22bf16ce6 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -7,6 +7,7 @@ config PPC_PSERIES select OF_DYNAMIC select FORCE_PCI select PCI_MSI + select GENERIC_ALLOCATOR select PPC_XICS select PPC_XIVE_SPAPR select PPC_ICP_NATIVE diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c index 2f8385523a13..1a53e048ceb7 100644 --- a/arch/powerpc/platforms/pseries/papr_scm.c +++ b/arch/powerpc/platforms/pseries/papr_scm.c @@ -1428,6 +1428,13 @@ static int papr_scm_probe(struct platform_device *pdev) return -ENODEV; } + /* + * open firmware platform device create won't update the NUMA + * distance table. For PAPR SCM devices we use numa_map_to_online_node() + * to find the nearest online NUMA node and that requires correct + * distance table information. + */ + update_numa_distance(dn); p = kzalloc(sizeof(*p), GFP_KERNEL); if (!p) diff --git a/arch/powerpc/platforms/pseries/vas.c b/arch/powerpc/platforms/pseries/vas.c index 559112312810..513180467562 100644 --- a/arch/powerpc/platforms/pseries/vas.c +++ b/arch/powerpc/platforms/pseries/vas.c @@ -856,6 +856,13 @@ int pseries_vas_dlpar_cpu(void) { int new_nr_creds, rc; + /* + * NX-GZIP is not enabled. Nothing to do for DLPAR event + */ + if (!copypaste_feat) + return 0; + + rc = h_query_vas_capabilities(H_QUERY_VAS_CAPABILITIES, vascaps[VAS_GZIP_DEF_FEAT_TYPE].feat, (u64)virt_to_phys(&hv_cop_caps)); @@ -1012,6 +1019,7 @@ static int __init pseries_vas_init(void) * Linux supports user space COPY/PASTE only with Radix */ if (!radix_enabled()) { + copypaste_feat = false; pr_err("API is supported only with radix page tables\n"); return -ENOTSUPP; } diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index 7dc1960f8bdb..8234013a8772 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -31,7 +31,7 @@ #include <mm/mmu_decl.h> #if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) -#include <linux/of_gpio.h> +#include <linux/gpio/legacy-of-mm-gpiochip.h> #endif static int __init cpm_init(void) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 73c620c2a3a1..e753a6bd4888 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -1275,7 +1275,7 @@ static int xmon_batch_next_cpu(void) while (!cpumask_empty(&xmon_batch_cpus)) { cpu = cpumask_next_wrap(smp_processor_id(), &xmon_batch_cpus, xmon_batch_start_cpu, true); - if (cpu == nr_cpumask_bits) + if (cpu >= nr_cpu_ids) break; if (xmon_batch_start_cpu == -1) xmon_batch_start_cpu = cpu; diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index c5e42cc37604..6adea68a2c05 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -63,6 +63,8 @@ config RISCV select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO select GENERIC_IDLE_POLL_SETUP select GENERIC_IOREMAP if MMU + select GENERIC_IRQ_IPI if SMP + select GENERIC_IRQ_IPI_MUX if SMP select GENERIC_IRQ_MULTI_HANDLER select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL @@ -74,6 +76,7 @@ config RISCV select GENERIC_TIME_VSYSCALL if MMU && 64BIT select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO select HARDIRQS_SW_RESEND + select HAS_IOPORT if MMU select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT && !XIP_KERNEL @@ -126,6 +129,7 @@ config RISCV select OF_IRQ select PCI_DOMAINS_GENERIC if PCI select PCI_MSI if PCI + select RISCV_ALTERNATIVE if !XIP_KERNEL select RISCV_INTC select RISCV_TIMER if RISCV_SBI select SIFIVE_PLIC @@ -401,9 +405,8 @@ config RISCV_ISA_C config RISCV_ISA_SVPBMT bool "SVPBMT extension support" depends on 64BIT && MMU - depends on !XIP_KERNEL + depends on RISCV_ALTERNATIVE default y - select RISCV_ALTERNATIVE help Adds support to dynamically detect the presence of the SVPBMT ISA-extension (Supervisor-mode: page-based memory types) and @@ -428,8 +431,8 @@ config TOOLCHAIN_HAS_ZBB config RISCV_ISA_ZBB bool "Zbb extension support for bit manipulation instructions" depends on TOOLCHAIN_HAS_ZBB - depends on !XIP_KERNEL && MMU - select RISCV_ALTERNATIVE + depends on MMU + depends on RISCV_ALTERNATIVE default y help Adds support to dynamically detect the presence of the ZBB @@ -443,9 +446,9 @@ config RISCV_ISA_ZBB config RISCV_ISA_ZICBOM bool "Zicbom extension support for non-coherent DMA operation" - depends on !XIP_KERNEL && MMU + depends on MMU + depends on RISCV_ALTERNATIVE default y - select RISCV_ALTERNATIVE select RISCV_DMA_NONCOHERENT help Adds support to dynamically detect the presence of the ZICBOM @@ -464,6 +467,28 @@ config TOOLCHAIN_HAS_ZIHINTPAUSE depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zihintpause) depends on LLD_VERSION >= 150000 || LD_VERSION >= 23600 +config TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI + def_bool y + # https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=aed44286efa8ae8717a77d94b51ac3614e2ca6dc + depends on AS_IS_GNU && AS_VERSION >= 23800 + help + Newer binutils versions default to ISA spec version 20191213 which + moves some instructions from the I extension to the Zicsr and Zifencei + extensions. + +config TOOLCHAIN_NEEDS_OLD_ISA_SPEC + def_bool y + depends on TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI + # https://github.com/llvm/llvm-project/commit/22e199e6afb1263c943c0c0d4498694e15bf8a16 + depends on CC_IS_CLANG && CLANG_VERSION < 170000 + help + Certain versions of clang do not support zicsr and zifencei via -march + but newer versions of binutils require it for the reasons noted in the + help text of CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI. This + option causes an older ISA spec compatible with these older versions + of clang to be passed to GAS, which has the same result as passing zicsr + and zifencei to -march. + config FPU bool "FPU support" default y diff --git a/arch/riscv/Kconfig.erratas b/arch/riscv/Kconfig.erratas index 69621ae6d647..0c8f4652cd82 100644 --- a/arch/riscv/Kconfig.erratas +++ b/arch/riscv/Kconfig.erratas @@ -2,8 +2,7 @@ menu "CPU errata selection" config ERRATA_SIFIVE bool "SiFive errata" - depends on !XIP_KERNEL - select RISCV_ALTERNATIVE + depends on RISCV_ALTERNATIVE help All SiFive errata Kconfig depend on this Kconfig. Disabling this Kconfig will disable all SiFive errata. Please say "Y" @@ -35,8 +34,7 @@ config ERRATA_SIFIVE_CIP_1200 config ERRATA_THEAD bool "T-HEAD errata" - depends on !XIP_KERNEL - select RISCV_ALTERNATIVE + depends on RISCV_ALTERNATIVE help All T-HEAD errata Kconfig depend on this Kconfig. Disabling this Kconfig will disable all T-HEAD errata. Please say "Y" diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index 6203c3378922..b05e833a022d 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -57,10 +57,12 @@ riscv-march-$(CONFIG_ARCH_RV64I) := rv64ima riscv-march-$(CONFIG_FPU) := $(riscv-march-y)fd riscv-march-$(CONFIG_RISCV_ISA_C) := $(riscv-march-y)c -# Newer binutils versions default to ISA spec version 20191213 which moves some -# instructions from the I extension to the Zicsr and Zifencei extensions. -toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei) -riscv-march-$(toolchain-need-zicsr-zifencei) := $(riscv-march-y)_zicsr_zifencei +ifdef CONFIG_TOOLCHAIN_NEEDS_OLD_ISA_SPEC +KBUILD_CFLAGS += -Wa,-misa-spec=2.2 +KBUILD_AFLAGS += -Wa,-misa-spec=2.2 +else +riscv-march-$(CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI) := $(riscv-march-y)_zicsr_zifencei +endif # Check if the toolchain supports Zihintpause extension riscv-march-$(CONFIG_TOOLCHAIN_HAS_ZIHINTPAUSE) := $(riscv-march-y)_zihintpause @@ -84,6 +86,13 @@ endif # Avoid generating .eh_frame sections. KBUILD_CFLAGS += -fno-asynchronous-unwind-tables -fno-unwind-tables +# The RISC-V attributes frequently cause compatibility issues and provide no +# information, so just turn them off. +KBUILD_CFLAGS += $(call cc-option,-mno-riscv-attribute) +KBUILD_AFLAGS += $(call cc-option,-mno-riscv-attribute) +KBUILD_CFLAGS += $(call as-option,-Wa$(comma)-mno-arch-attr) +KBUILD_AFLAGS += $(call as-option,-Wa$(comma)-mno-arch-attr) + KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-relax) KBUILD_AFLAGS_MODULE += $(call as-option,-Wa$(comma)-mno-relax) diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts index a0769185be97..4ed33c1e7c9c 100644 --- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts @@ -1,6 +1,25 @@ // SPDX-License-Identifier: (GPL-2.0+ or MIT) // Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org> +/* + * gpio line names + * + * The Nezha-D1 has a 40-pin IO header. Some of these pins are routed + * directly to pads on the SoC, others come from an 8-bit pcf857x IO + * expander. Therefore, these line names are specified in two places: + * one set for the pcf857x, and one set for the pio controller. + * + * Lines which are routed to the 40-pin header are named as follows: + * <pin#> [<pin name>] + * where: + * <pin#> is the actual pin number of the 40-pin header + * <pin name> is the name of the pin by function/gpio# + * + * For details regarding pin numbers and names see the schematics (under + * "IO EXPAND"): + * http://dl.linux-sunxi.org/D1/D1_Nezha_development_board_schematic_diagram_20210224.pdf + */ + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -90,6 +109,15 @@ gpio-controller; #gpio-cells = <2>; #interrupt-cells = <2>; + gpio-line-names = + "pin13 [gpio8]", + "pin16 [gpio10]", + "pin18 [gpio11]", + "pin26 [gpio17]", + "pin22 [gpio14]", + "pin28 [gpio19]", + "pin37 [gpio23]", + "pin11 [gpio6]"; }; }; @@ -164,3 +192,47 @@ usb1_vbus-supply = <®_vcc>; status = "okay"; }; + +&pio { + gpio-line-names = + /* Port A */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* Port B */ + "pin5 [gpio2/twi2-sck]", + "pin3 [gpio1/twi2-sda]", + "", + "pin38 [gpio24/i2s2-din]", + "pin40 [gpio25/i2s2-dout]", + "pin12 [gpio7/i2s-clk]", + "pin35 [gpio22/i2s2-lrck]", + "", + "pin8 [gpio4/uart0-txd]", + "pin10 [gpio5/uart0-rxd]", + "", + "", + "pin15 [gpio9]", + "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* Port C */ + "", + "pin31 [gpio21]", + "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* Port D */ + "", "", "", "", "", "", "", "", + "", "", + "pin24 [gpio16/spi1-ce0]", + "pin23 [gpio15/spi1-clk]", + "pin19 [gpio12/spi1-mosi]", + "pin21 [gpio13/spi1-miso]", + "pin27 [gpio18/spi1-hold]", + "pin29 [gpio20/spi1-wp]", + "", "", "", "", "", "", + "pin7 [gpio3/pwm]"; +}; diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 6fadcee7800f..922e8e0e2c09 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -211,7 +211,7 @@ clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; dmas = <&dma 14>, <&dma 14>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -224,7 +224,7 @@ clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; dmas = <&dma 15>, <&dma 15>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -237,7 +237,7 @@ clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; dmas = <&dma 16>, <&dma 16>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -250,7 +250,7 @@ clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; dmas = <&dma 17>, <&dma 17>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -263,7 +263,7 @@ clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; dmas = <&dma 18>, <&dma 18>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -276,7 +276,7 @@ clocks = <&ccu CLK_BUS_UART5>; resets = <&ccu RST_BUS_UART5>; dmas = <&dma 19>, <&dma 19>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -367,6 +367,18 @@ #size-cells = <1>; }; + crypto: crypto@3040000 { + compatible = "allwinner,sun20i-d1-crypto"; + reg = <0x3040000 0x800>; + interrupts = <SOC_PERIPHERAL_IRQ(52) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, + <&ccu CLK_CE>, + <&ccu CLK_MBUS_CE>, + <&rtc CLK_IOSC>; + clock-names = "bus", "mod", "ram", "trng"; + resets = <&ccu RST_BUS_CE>; + }; + mbus: dram-controller@3102000 { compatible = "allwinner,sun20i-d1-mbus"; reg = <0x3102000 0x1000>, diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi index 07e2e2649604..f87c5164d9cf 100644 --- a/arch/riscv/boot/dts/canaan/k210.dtsi +++ b/arch/riscv/boot/dts/canaan/k210.dtsi @@ -259,7 +259,6 @@ <&sysclk K210_CLK_APB0>; clock-names = "ssi_clk", "pclk"; resets = <&sysrst K210_RST_SPI2>; - spi-max-frequency = <25000000>; }; i2s0: i2s@50250000 { diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 0a9bb84af438..104504352e99 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -234,6 +234,7 @@ reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; clocks = <&refclk>; #clock-cells = <1>; + #reset-cells = <1>; }; ccc_se: clock-controller@38010000 { @@ -415,7 +416,7 @@ }; mac0: ethernet@20110000 { - compatible = "cdns,macb"; + compatible = "microchip,mpfs-macb", "cdns,macb"; reg = <0x0 0x20110000 0x0 0x2000>; #address-cells = <1>; #size-cells = <0>; @@ -424,11 +425,12 @@ local-mac-address = [00 00 00 00 00 00]; clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; clock-names = "pclk", "hclk"; + resets = <&clkcfg CLK_MAC0>; status = "disabled"; }; mac1: ethernet@20112000 { - compatible = "cdns,macb"; + compatible = "microchip,mpfs-macb", "cdns,macb"; reg = <0x0 0x20112000 0x0 0x2000>; #address-cells = <1>; #size-cells = <0>; @@ -437,6 +439,7 @@ local-mac-address = [00 00 00 00 00 00]; clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; clock-names = "pclk", "hclk"; + resets = <&clkcfg CLK_MAC1>; status = "disabled"; }; @@ -498,7 +501,8 @@ mbox: mailbox@37020000 { compatible = "microchip,mpfs-mailbox"; - reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; + reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>, + <0x0 0x37020800 0x0 0x100>; interrupt-parent = <&plic>; interrupts = <96>; #mbox-cells = <1>; diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 7b00a48580ca..170956846d49 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -1,2 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb + +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h new file mode 100644 index 000000000000..fb0139b56723 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h @@ -0,0 +1,308 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +/* + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + * Copyright (C) 2022 StarFive Technology Co., Ltd. + */ + +#ifndef __JH7110_PINFUNC_H__ +#define __JH7110_PINFUNC_H__ + +/* + * mux bits: + * | 31 - 24 | 23 - 16 | 15 - 10 | 9 - 8 | 7 - 0 | + * | din | dout | doen | function | gpio nr | + * + * dout: output signal + * doen: output enable signal + * din: optional input signal, 0xff = none + * function: function selector + * gpio nr: gpio number, 0 - 63 + */ +#define GPIOMUX(n, dout, doen, din) ( \ + (((din) & 0xff) << 24) | \ + (((dout) & 0xff) << 16) | \ + (((doen) & 0x3f) << 10) | \ + ((n) & 0x3f)) + +#define PINMUX(n, func) ((1 << 10) | (((func) & 0x3) << 8) | ((n) & 0xff)) + +/* sys_iomux dout */ +#define GPOUT_LOW 0 +#define GPOUT_HIGH 1 +#define GPOUT_SYS_WAVE511_UART_TX 2 +#define GPOUT_SYS_CAN0_STBY 3 +#define GPOUT_SYS_CAN0_TST_NEXT_BIT 4 +#define GPOUT_SYS_CAN0_TST_SAMPLE_POINT 5 +#define GPOUT_SYS_CAN0_TXD 6 +#define GPOUT_SYS_USB_DRIVE_VBUS 7 +#define GPOUT_SYS_QSPI_CS1 8 +#define GPOUT_SYS_SPDIF 9 +#define GPOUT_SYS_HDMI_CEC_SDA 10 +#define GPOUT_SYS_HDMI_DDC_SCL 11 +#define GPOUT_SYS_HDMI_DDC_SDA 12 +#define GPOUT_SYS_WATCHDOG 13 +#define GPOUT_SYS_I2C0_CLK 14 +#define GPOUT_SYS_I2C0_DATA 15 +#define GPOUT_SYS_SDIO0_BACK_END_POWER 16 +#define GPOUT_SYS_SDIO0_CARD_POWER_EN 17 +#define GPOUT_SYS_SDIO0_CCMD_OD_PULLUP_EN 18 +#define GPOUT_SYS_SDIO0_RST 19 +#define GPOUT_SYS_UART0_TX 20 +#define GPOUT_SYS_HIFI4_JTAG_TDO 21 +#define GPOUT_SYS_JTAG_TDO 22 +#define GPOUT_SYS_PDM_MCLK 23 +#define GPOUT_SYS_PWM_CHANNEL0 24 +#define GPOUT_SYS_PWM_CHANNEL1 25 +#define GPOUT_SYS_PWM_CHANNEL2 26 +#define GPOUT_SYS_PWM_CHANNEL3 27 +#define GPOUT_SYS_PWMDAC_LEFT 28 +#define GPOUT_SYS_PWMDAC_RIGHT 29 +#define GPOUT_SYS_SPI0_CLK 30 +#define GPOUT_SYS_SPI0_FSS 31 +#define GPOUT_SYS_SPI0_TXD 32 +#define GPOUT_SYS_GMAC_PHYCLK 33 +#define GPOUT_SYS_I2SRX_BCLK 34 +#define GPOUT_SYS_I2SRX_LRCK 35 +#define GPOUT_SYS_I2STX0_BCLK 36 +#define GPOUT_SYS_I2STX0_LRCK 37 +#define GPOUT_SYS_MCLK 38 +#define GPOUT_SYS_TDM_CLK 39 +#define GPOUT_SYS_TDM_SYNC 40 +#define GPOUT_SYS_TDM_TXD 41 +#define GPOUT_SYS_TRACE_DATA0 42 +#define GPOUT_SYS_TRACE_DATA1 43 +#define GPOUT_SYS_TRACE_DATA2 44 +#define GPOUT_SYS_TRACE_DATA3 45 +#define GPOUT_SYS_TRACE_REF 46 +#define GPOUT_SYS_CAN1_STBY 47 +#define GPOUT_SYS_CAN1_TST_NEXT_BIT 48 +#define GPOUT_SYS_CAN1_TST_SAMPLE_POINT 49 +#define GPOUT_SYS_CAN1_TXD 50 +#define GPOUT_SYS_I2C1_CLK 51 +#define GPOUT_SYS_I2C1_DATA 52 +#define GPOUT_SYS_SDIO1_BACK_END_POWER 53 +#define GPOUT_SYS_SDIO1_CARD_POWER_EN 54 +#define GPOUT_SYS_SDIO1_CLK 55 +#define GPOUT_SYS_SDIO1_CMD_OD_PULLUP_EN 56 +#define GPOUT_SYS_SDIO1_CMD 57 +#define GPOUT_SYS_SDIO1_DATA0 58 +#define GPOUT_SYS_SDIO1_DATA1 59 +#define GPOUT_SYS_SDIO1_DATA2 60 +#define GPOUT_SYS_SDIO1_DATA3 61 +#define GPOUT_SYS_SDIO1_DATA4 63 +#define GPOUT_SYS_SDIO1_DATA5 63 +#define GPOUT_SYS_SDIO1_DATA6 64 +#define GPOUT_SYS_SDIO1_DATA7 65 +#define GPOUT_SYS_SDIO1_RST 66 +#define GPOUT_SYS_UART1_RTS 67 +#define GPOUT_SYS_UART1_TX 68 +#define GPOUT_SYS_I2STX1_SDO0 69 +#define GPOUT_SYS_I2STX1_SDO1 70 +#define GPOUT_SYS_I2STX1_SDO2 71 +#define GPOUT_SYS_I2STX1_SDO3 72 +#define GPOUT_SYS_SPI1_CLK 73 +#define GPOUT_SYS_SPI1_FSS 74 +#define GPOUT_SYS_SPI1_TXD 75 +#define GPOUT_SYS_I2C2_CLK 76 +#define GPOUT_SYS_I2C2_DATA 77 +#define GPOUT_SYS_UART2_RTS 78 +#define GPOUT_SYS_UART2_TX 79 +#define GPOUT_SYS_SPI2_CLK 80 +#define GPOUT_SYS_SPI2_FSS 81 +#define GPOUT_SYS_SPI2_TXD 82 +#define GPOUT_SYS_I2C3_CLK 83 +#define GPOUT_SYS_I2C3_DATA 84 +#define GPOUT_SYS_UART3_TX 85 +#define GPOUT_SYS_SPI3_CLK 86 +#define GPOUT_SYS_SPI3_FSS 87 +#define GPOUT_SYS_SPI3_TXD 88 +#define GPOUT_SYS_I2C4_CLK 89 +#define GPOUT_SYS_I2C4_DATA 90 +#define GPOUT_SYS_UART4_RTS 91 +#define GPOUT_SYS_UART4_TX 92 +#define GPOUT_SYS_SPI4_CLK 93 +#define GPOUT_SYS_SPI4_FSS 94 +#define GPOUT_SYS_SPI4_TXD 95 +#define GPOUT_SYS_I2C5_CLK 96 +#define GPOUT_SYS_I2C5_DATA 97 +#define GPOUT_SYS_UART5_RTS 98 +#define GPOUT_SYS_UART5_TX 99 +#define GPOUT_SYS_SPI5_CLK 100 +#define GPOUT_SYS_SPI5_FSS 101 +#define GPOUT_SYS_SPI5_TXD 102 +#define GPOUT_SYS_I2C6_CLK 103 +#define GPOUT_SYS_I2C6_DATA 104 +#define GPOUT_SYS_SPI6_CLK 105 +#define GPOUT_SYS_SPI6_FSS 106 +#define GPOUT_SYS_SPI6_TXD 107 + +/* aon_iomux dout */ +#define GPOUT_AON_CLK_32K_OUT 2 +#define GPOUT_AON_PTC0_PWM4 3 +#define GPOUT_AON_PTC0_PWM5 4 +#define GPOUT_AON_PTC0_PWM6 5 +#define GPOUT_AON_PTC0_PWM7 6 +#define GPOUT_AON_CLK_GCLK0 7 +#define GPOUT_AON_CLK_GCLK1 8 +#define GPOUT_AON_CLK_GCLK2 9 + +/* sys_iomux doen */ +#define GPOEN_ENABLE 0 +#define GPOEN_DISABLE 1 +#define GPOEN_SYS_HDMI_CEC_SDA 2 +#define GPOEN_SYS_HDMI_DDC_SCL 3 +#define GPOEN_SYS_HDMI_DDC_SDA 4 +#define GPOEN_SYS_I2C0_CLK 5 +#define GPOEN_SYS_I2C0_DATA 6 +#define GPOEN_SYS_HIFI4_JTAG_TDO 7 +#define GPOEN_SYS_JTAG_TDO 8 +#define GPOEN_SYS_PWM0_CHANNEL0 9 +#define GPOEN_SYS_PWM0_CHANNEL1 10 +#define GPOEN_SYS_PWM0_CHANNEL2 11 +#define GPOEN_SYS_PWM0_CHANNEL3 12 +#define GPOEN_SYS_SPI0_NSSPCTL 13 +#define GPOEN_SYS_SPI0_NSSP 14 +#define GPOEN_SYS_TDM_SYNC 15 +#define GPOEN_SYS_TDM_TXD 16 +#define GPOEN_SYS_I2C1_CLK 17 +#define GPOEN_SYS_I2C1_DATA 18 +#define GPOEN_SYS_SDIO1_CMD 19 +#define GPOEN_SYS_SDIO1_DATA0 20 +#define GPOEN_SYS_SDIO1_DATA1 21 +#define GPOEN_SYS_SDIO1_DATA2 22 +#define GPOEN_SYS_SDIO1_DATA3 23 +#define GPOEN_SYS_SDIO1_DATA4 24 +#define GPOEN_SYS_SDIO1_DATA5 25 +#define GPOEN_SYS_SDIO1_DATA6 26 +#define GPOEN_SYS_SDIO1_DATA7 27 +#define GPOEN_SYS_SPI1_NSSPCTL 28 +#define GPOEN_SYS_SPI1_NSSP 29 +#define GPOEN_SYS_I2C2_CLK 30 +#define GPOEN_SYS_I2C2_DATA 31 +#define GPOEN_SYS_SPI2_NSSPCTL 32 +#define GPOEN_SYS_SPI2_NSSP 33 +#define GPOEN_SYS_I2C3_CLK 34 +#define GPOEN_SYS_I2C3_DATA 35 +#define GPOEN_SYS_SPI3_NSSPCTL 36 +#define GPOEN_SYS_SPI3_NSSP 37 +#define GPOEN_SYS_I2C4_CLK 38 +#define GPOEN_SYS_I2C4_DATA 39 +#define GPOEN_SYS_SPI4_NSSPCTL 40 +#define GPOEN_SYS_SPI4_NSSP 41 +#define GPOEN_SYS_I2C5_CLK 42 +#define GPOEN_SYS_I2C5_DATA 43 +#define GPOEN_SYS_SPI5_NSSPCTL 44 +#define GPOEN_SYS_SPI5_NSSP 45 +#define GPOEN_SYS_I2C6_CLK 46 +#define GPOEN_SYS_I2C6_DATA 47 +#define GPOEN_SYS_SPI6_NSSPCTL 48 +#define GPOEN_SYS_SPI6_NSSP 49 + +/* aon_iomux doen */ +#define GPOEN_AON_PTC0_OE_N_4 2 +#define GPOEN_AON_PTC0_OE_N_5 3 +#define GPOEN_AON_PTC0_OE_N_6 4 +#define GPOEN_AON_PTC0_OE_N_7 5 + +/* sys_iomux gin */ +#define GPI_NONE 255 + +#define GPI_SYS_WAVE511_UART_RX 0 +#define GPI_SYS_CAN0_RXD 1 +#define GPI_SYS_USB_OVERCURRENT 2 +#define GPI_SYS_SPDIF 3 +#define GPI_SYS_JTAG_RST 4 +#define GPI_SYS_HDMI_CEC_SDA 5 +#define GPI_SYS_HDMI_DDC_SCL 6 +#define GPI_SYS_HDMI_DDC_SDA 7 +#define GPI_SYS_HDMI_HPD 8 +#define GPI_SYS_I2C0_CLK 9 +#define GPI_SYS_I2C0_DATA 10 +#define GPI_SYS_SDIO0_CD 11 +#define GPI_SYS_SDIO0_INT 12 +#define GPI_SYS_SDIO0_WP 13 +#define GPI_SYS_UART0_RX 14 +#define GPI_SYS_HIFI4_JTAG_TCK 15 +#define GPI_SYS_HIFI4_JTAG_TDI 16 +#define GPI_SYS_HIFI4_JTAG_TMS 17 +#define GPI_SYS_HIFI4_JTAG_RST 18 +#define GPI_SYS_JTAG_TDI 19 +#define GPI_SYS_JTAG_TMS 20 +#define GPI_SYS_PDM_DMIC0 21 +#define GPI_SYS_PDM_DMIC1 22 +#define GPI_SYS_I2SRX_SDIN0 23 +#define GPI_SYS_I2SRX_SDIN1 24 +#define GPI_SYS_I2SRX_SDIN2 25 +#define GPI_SYS_SPI0_CLK 26 +#define GPI_SYS_SPI0_FSS 27 +#define GPI_SYS_SPI0_RXD 28 +#define GPI_SYS_JTAG_TCK 29 +#define GPI_SYS_MCLK_EXT 30 +#define GPI_SYS_I2SRX_BCLK 31 +#define GPI_SYS_I2SRX_LRCK 32 +#define GPI_SYS_I2STX0_BCLK 33 +#define GPI_SYS_I2STX0_LRCK 34 +#define GPI_SYS_TDM_CLK 35 +#define GPI_SYS_TDM_RXD 36 +#define GPI_SYS_TDM_SYNC 37 +#define GPI_SYS_CAN1_RXD 38 +#define GPI_SYS_I2C1_CLK 39 +#define GPI_SYS_I2C1_DATA 40 +#define GPI_SYS_SDIO1_CD 41 +#define GPI_SYS_SDIO1_INT 42 +#define GPI_SYS_SDIO1_WP 43 +#define GPI_SYS_SDIO1_CMD 44 +#define GPI_SYS_SDIO1_DATA0 45 +#define GPI_SYS_SDIO1_DATA1 46 +#define GPI_SYS_SDIO1_DATA2 47 +#define GPI_SYS_SDIO1_DATA3 48 +#define GPI_SYS_SDIO1_DATA4 49 +#define GPI_SYS_SDIO1_DATA5 50 +#define GPI_SYS_SDIO1_DATA6 51 +#define GPI_SYS_SDIO1_DATA7 52 +#define GPI_SYS_SDIO1_STRB 53 +#define GPI_SYS_UART1_CTS 54 +#define GPI_SYS_UART1_RX 55 +#define GPI_SYS_SPI1_CLK 56 +#define GPI_SYS_SPI1_FSS 57 +#define GPI_SYS_SPI1_RXD 58 +#define GPI_SYS_I2C2_CLK 59 +#define GPI_SYS_I2C2_DATA 60 +#define GPI_SYS_UART2_CTS 61 +#define GPI_SYS_UART2_RX 62 +#define GPI_SYS_SPI2_CLK 63 +#define GPI_SYS_SPI2_FSS 64 +#define GPI_SYS_SPI2_RXD 65 +#define GPI_SYS_I2C3_CLK 66 +#define GPI_SYS_I2C3_DATA 67 +#define GPI_SYS_UART3_RX 68 +#define GPI_SYS_SPI3_CLK 69 +#define GPI_SYS_SPI3_FSS 70 +#define GPI_SYS_SPI3_RXD 71 +#define GPI_SYS_I2C4_CLK 72 +#define GPI_SYS_I2C4_DATA 73 +#define GPI_SYS_UART4_CTS 74 +#define GPI_SYS_UART4_RX 75 +#define GPI_SYS_SPI4_CLK 76 +#define GPI_SYS_SPI4_FSS 77 +#define GPI_SYS_SPI4_RXD 78 +#define GPI_SYS_I2C5_CLK 79 +#define GPI_SYS_I2C5_DATA 80 +#define GPI_SYS_UART5_CTS 81 +#define GPI_SYS_UART5_RX 82 +#define GPI_SYS_SPI5_CLK 83 +#define GPI_SYS_SPI5_FSS 84 +#define GPI_SYS_SPI5_RXD 85 +#define GPI_SYS_I2C6_CLK 86 +#define GPI_SYS_I2C6_DATA 87 +#define GPI_SYS_SPI6_CLK 88 +#define GPI_SYS_SPI6_FSS 89 +#define GPI_SYS_SPI6_RXD 90 + +/* aon_iomux gin */ +#define GPI_AON_PMU_GPIO_WAKEUP_0 0 +#define GPI_AON_PMU_GPIO_WAKEUP_1 1 +#define GPI_AON_PMU_GPIO_WAKEUP_2 2 +#define GPI_AON_PMU_GPIO_WAKEUP_3 3 + +#endif diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts new file mode 100644 index 000000000000..4af3300f3cf3 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2.dtsi" + +/ { + model = "StarFive VisionFive 2 v1.2A"; + compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts new file mode 100644 index 000000000000..9230cc3d8946 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2.dtsi" + +/ { + model = "StarFive VisionFive 2 v1.3B"; + compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi new file mode 100644 index 000000000000..2a6d81609284 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110.dtsi" +#include "jh7110-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + i2c0 = &i2c0; + i2c2 = &i2c2; + i2c5 = &i2c5; + i2c6 = &i2c6; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = <4000000>; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x1 0x0>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; + priority = <224>; + }; +}; + +&gmac0_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac0_rmii_refin { + clock-frequency = <50000000>; +}; + +&gmac1_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac1_rmii_refin { + clock-frequency = <50000000>; +}; + +&i2srx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2srx_lrck_ext { + clock-frequency = <192000>; +}; + +&i2stx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2stx_lrck_ext { + clock-frequency = <192000>; +}; + +&mclk_ext { + clock-frequency = <12288000>; +}; + +&osc { + clock-frequency = <24000000>; +}; + +&rtc_osc { + clock-frequency = <32768>; +}; + +&tdm_ext { + clock-frequency = <49152000>; +}; + +&i2c0 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&i2c5 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; +}; + +&i2c6 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; +}; + +&sysgpio { + i2c0_pins: i2c0-0 { + i2c-pins { + pinmux = <GPIOMUX(57, GPOUT_LOW, + GPOEN_SYS_I2C0_CLK, + GPI_SYS_I2C0_CLK)>, + <GPIOMUX(58, GPOUT_LOW, + GPOEN_SYS_I2C0_DATA, + GPI_SYS_I2C0_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c2_pins: i2c2-0 { + i2c-pins { + pinmux = <GPIOMUX(3, GPOUT_LOW, + GPOEN_SYS_I2C2_CLK, + GPI_SYS_I2C2_CLK)>, + <GPIOMUX(2, GPOUT_LOW, + GPOEN_SYS_I2C2_DATA, + GPI_SYS_I2C2_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c5_pins: i2c5-0 { + i2c-pins { + pinmux = <GPIOMUX(19, GPOUT_LOW, + GPOEN_SYS_I2C5_CLK, + GPI_SYS_I2C5_CLK)>, + <GPIOMUX(20, GPOUT_LOW, + GPOEN_SYS_I2C5_DATA, + GPI_SYS_I2C5_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c6_pins: i2c6-0 { + i2c-pins { + pinmux = <GPIOMUX(16, GPOUT_LOW, + GPOEN_SYS_I2C6_CLK, + GPI_SYS_I2C6_CLK)>, + <GPIOMUX(17, GPOUT_LOW, + GPOEN_SYS_I2C6_DATA, + GPI_SYS_I2C6_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + uart0_pins: uart0-0 { + tx-pins { + pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(6, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_UART0_RX)>; + bias-disable; /* external pull-up */ + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi new file mode 100644 index 000000000000..4c5fdb905da8 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -0,0 +1,500 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include <dt-bindings/clock/starfive,jh7110-crg.h> +#include <dt-bindings/reset/starfive,jh7110-crg.h> + +/ { + compatible = "starfive,jh7110"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + S7_0: cpu@0 { + compatible = "sifive,s7", "riscv"; + reg = <0>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <16384>; + next-level-cache = <&ccache>; + riscv,isa = "rv64imac_zba_zbb"; + status = "disabled"; + + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_1: cpu@1 { + compatible = "sifive,u74-mc", "riscv"; + reg = <1>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu1_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_2: cpu@2 { + compatible = "sifive,u74-mc", "riscv"; + reg = <2>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu2_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_3: cpu@3 { + compatible = "sifive,u74-mc", "riscv"; + reg = <3>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu3_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_4: cpu@4 { + compatible = "sifive,u74-mc", "riscv"; + reg = <4>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu4_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&S7_0>; + }; + + core1 { + cpu = <&U74_1>; + }; + + core2 { + cpu = <&U74_2>; + }; + + core3 { + cpu = <&U74_3>; + }; + + core4 { + cpu = <&U74_4>; + }; + }; + }; + }; + + gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac0_rgmii_rxin"; + #clock-cells = <0>; + }; + + gmac0_rmii_refin: gmac0-rmii-refin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac0_rmii_refin"; + #clock-cells = <0>; + }; + + gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac1_rgmii_rxin"; + #clock-cells = <0>; + }; + + gmac1_rmii_refin: gmac1-rmii-refin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac1_rmii_refin"; + #clock-cells = <0>; + }; + + i2srx_bclk_ext: i2srx-bclk-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2srx_bclk_ext"; + #clock-cells = <0>; + }; + + i2srx_lrck_ext: i2srx-lrck-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2srx_lrck_ext"; + #clock-cells = <0>; + }; + + i2stx_bclk_ext: i2stx-bclk-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2stx_bclk_ext"; + #clock-cells = <0>; + }; + + i2stx_lrck_ext: i2stx-lrck-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2stx_lrck_ext"; + #clock-cells = <0>; + }; + + mclk_ext: mclk-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "mclk_ext"; + #clock-cells = <0>; + }; + + osc: oscillator { + compatible = "fixed-clock"; + clock-output-names = "osc"; + #clock-cells = <0>; + }; + + rtc_osc: rtc-oscillator { + compatible = "fixed-clock"; + clock-output-names = "rtc_osc"; + #clock-cells = <0>; + }; + + tdm_ext: tdm-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "tdm_ext"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&plic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clint: timer@2000000 { + compatible = "starfive,jh7110-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>, + <&cpu2_intc 3>, <&cpu2_intc 7>, + <&cpu3_intc 3>, <&cpu3_intc 7>, + <&cpu4_intc 3>, <&cpu4_intc 7>; + }; + + ccache: cache-controller@2010000 { + compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache"; + reg = <0x0 0x2010000 0x0 0x4000>; + interrupts = <1>, <3>, <4>, <2>; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <2048>; + cache-size = <2097152>; + cache-unified; + }; + + plic: interrupt-controller@c000000 { + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + interrupts-extended = <&cpu0_intc 11>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <0>; + riscv,ndev = <136>; + }; + + uart0: serial@10000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x10000000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>, + <&syscrg JH7110_SYSCLK_UART0_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART0_APB>; + interrupts = <32>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart1: serial@10010000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x10010000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>, + <&syscrg JH7110_SYSCLK_UART1_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART1_APB>; + interrupts = <33>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@10020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x10020000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>, + <&syscrg JH7110_SYSCLK_UART2_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART2_APB>; + interrupts = <34>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c0: i2c@10030000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x10030000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C0_APB>; + interrupts = <35>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@10040000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x10040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C1_APB>; + interrupts = <36>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@10050000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x10050000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C2_APB>; + interrupts = <37>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart3: serial@12000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x12000000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>, + <&syscrg JH7110_SYSCLK_UART3_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART3_APB>; + interrupts = <45>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: serial@12010000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x12010000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>, + <&syscrg JH7110_SYSCLK_UART4_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART4_APB>; + interrupts = <46>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart5: serial@12020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x12020000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>, + <&syscrg JH7110_SYSCLK_UART5_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART5_APB>; + interrupts = <47>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c3: i2c@12030000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12030000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C3_APB>; + interrupts = <48>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@12040000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C4_APB>; + interrupts = <49>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@12050000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12050000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C5_APB>; + interrupts = <50>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@12060000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12060000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C6_APB>; + interrupts = <51>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + syscrg: clock-controller@13020000 { + compatible = "starfive,jh7110-syscrg"; + reg = <0x0 0x13020000 0x0 0x10000>; + clocks = <&osc>, <&gmac1_rmii_refin>, + <&gmac1_rgmii_rxin>, + <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, + <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, + <&tdm_ext>, <&mclk_ext>; + clock-names = "osc", "gmac1_rmii_refin", + "gmac1_rgmii_rxin", + "i2stx_bclk_ext", "i2stx_lrck_ext", + "i2srx_bclk_ext", "i2srx_lrck_ext", + "tdm_ext", "mclk_ext"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sysgpio: pinctrl@13040000 { + compatible = "starfive,jh7110-sys-pinctrl"; + reg = <0x0 0x13040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>; + resets = <&syscrg JH7110_SYSRST_IOMUX_APB>; + interrupts = <86>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + aoncrg: clock-controller@17000000 { + compatible = "starfive,jh7110-aoncrg"; + reg = <0x0 0x17000000 0x0 0x10000>; + clocks = <&osc>, <&gmac0_rmii_refin>, + <&gmac0_rgmii_rxin>, + <&syscrg JH7110_SYSCLK_STG_AXIAHB>, + <&syscrg JH7110_SYSCLK_APB_BUS>, + <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>, + <&rtc_osc>; + clock-names = "osc", "gmac0_rmii_refin", + "gmac0_rgmii_rxin", "stg_axiahb", + "apb_bus", "gmac0_gtxclk", + "rtc_osc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + aongpio: pinctrl@17020000 { + compatible = "starfive,jh7110-aon-pinctrl"; + reg = <0x0 0x17020000 0x0 0x10000>; + resets = <&aoncrg JH7110_AONRST_IOMUX>; + interrupts = <85>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; diff --git a/arch/riscv/configs/nommu_k210_defconfig b/arch/riscv/configs/nommu_k210_defconfig index 79b3ccd58ff0..e36fffd6fb18 100644 --- a/arch/riscv/configs/nommu_k210_defconfig +++ b/arch/riscv/configs/nommu_k210_defconfig @@ -1,6 +1,5 @@ # CONFIG_CPU_ISOLATION is not set CONFIG_LOG_BUF_SHIFT=13 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12 CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_GZIP is not set # CONFIG_RD_BZIP2 is not set diff --git a/arch/riscv/configs/nommu_k210_sdcard_defconfig b/arch/riscv/configs/nommu_k210_sdcard_defconfig index 6b80bb13b8ed..c1ad85f0a4f7 100644 --- a/arch/riscv/configs/nommu_k210_sdcard_defconfig +++ b/arch/riscv/configs/nommu_k210_sdcard_defconfig @@ -1,6 +1,5 @@ # CONFIG_CPU_ISOLATION is not set CONFIG_LOG_BUF_SHIFT=13 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12 CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSFS_SYSCALL is not set # CONFIG_FHANDLE is not set diff --git a/arch/riscv/configs/nommu_virt_defconfig b/arch/riscv/configs/nommu_virt_defconfig index 4cf0f297091e..b794e2f8144e 100644 --- a/arch/riscv/configs/nommu_virt_defconfig +++ b/arch/riscv/configs/nommu_virt_defconfig @@ -1,6 +1,5 @@ # CONFIG_CPU_ISOLATION is not set CONFIG_LOG_BUF_SHIFT=16 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12 CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set diff --git a/arch/riscv/errata/sifive/errata.c b/arch/riscv/errata/sifive/errata.c index da55cb247e89..31d2ebea4286 100644 --- a/arch/riscv/errata/sifive/errata.c +++ b/arch/riscv/errata/sifive/errata.c @@ -111,7 +111,7 @@ void __init_or_module sifive_errata_patch_func(struct alt_entry *begin, mutex_lock(&text_mutex); patch_text_nosync(ALT_OLD_PTR(alt), ALT_ALT_PTR(alt), alt->alt_len); - mutex_lock(&text_mutex); + mutex_unlock(&text_mutex); cpu_apply_errata |= tmp; } } diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h index 5c3e7b97fcc6..0a55099bb734 100644 --- a/arch/riscv/include/asm/fixmap.h +++ b/arch/riscv/include/asm/fixmap.h @@ -22,6 +22,14 @@ */ enum fixed_addresses { FIX_HOLE, + /* + * The fdt fixmap mapping must be PMD aligned and will be mapped + * using PMD entries in fixmap_pmd in 64-bit and a PGD entry in 32-bit. + */ + FIX_FDT_END, + FIX_FDT = FIX_FDT_END + FIX_FDT_SIZE / PAGE_SIZE - 1, + + /* Below fixmaps will be mapped using fixmap_pte */ FIX_PTE, FIX_PMD, FIX_PUD, diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h index 9e73922e1e2e..d47d87c2d7e3 100644 --- a/arch/riscv/include/asm/ftrace.h +++ b/arch/riscv/include/asm/ftrace.h @@ -109,6 +109,6 @@ int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec); #define ftrace_init_nop ftrace_init_nop #endif -#endif +#endif /* CONFIG_DYNAMIC_FTRACE */ #endif /* _ASM_RISCV_FTRACE_H */ diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h index e3021b2590de..6263a0de1c6a 100644 --- a/arch/riscv/include/asm/hwcap.h +++ b/arch/riscv/include/asm/hwcap.h @@ -57,18 +57,31 @@ struct riscv_isa_ext_data { unsigned int isa_ext_id; }; +unsigned long riscv_isa_extension_base(const unsigned long *isa_bitmap); + +#define riscv_isa_extension_mask(ext) BIT_MASK(RISCV_ISA_EXT_##ext) + +bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, int bit); +#define riscv_isa_extension_available(isa_bitmap, ext) \ + __riscv_isa_extension_available(isa_bitmap, RISCV_ISA_EXT_##ext) + static __always_inline bool riscv_has_extension_likely(const unsigned long ext) { compiletime_assert(ext < RISCV_ISA_EXT_MAX, "ext must be < RISCV_ISA_EXT_MAX"); - asm_volatile_goto( - ALTERNATIVE("j %l[l_no]", "nop", 0, %[ext], 1) - : - : [ext] "i" (ext) - : - : l_no); + if (IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) { + asm_volatile_goto( + ALTERNATIVE("j %l[l_no]", "nop", 0, %[ext], 1) + : + : [ext] "i" (ext) + : + : l_no); + } else { + if (!__riscv_isa_extension_available(NULL, ext)) + goto l_no; + } return true; l_no: @@ -81,26 +94,23 @@ riscv_has_extension_unlikely(const unsigned long ext) compiletime_assert(ext < RISCV_ISA_EXT_MAX, "ext must be < RISCV_ISA_EXT_MAX"); - asm_volatile_goto( - ALTERNATIVE("nop", "j %l[l_yes]", 0, %[ext], 1) - : - : [ext] "i" (ext) - : - : l_yes); + if (IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) { + asm_volatile_goto( + ALTERNATIVE("nop", "j %l[l_yes]", 0, %[ext], 1) + : + : [ext] "i" (ext) + : + : l_yes); + } else { + if (__riscv_isa_extension_available(NULL, ext)) + goto l_yes; + } return false; l_yes: return true; } -unsigned long riscv_isa_extension_base(const unsigned long *isa_bitmap); - -#define riscv_isa_extension_mask(ext) BIT_MASK(RISCV_ISA_EXT_##ext) - -bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, int bit); -#define riscv_isa_extension_available(isa_bitmap, ext) \ - __riscv_isa_extension_available(isa_bitmap, RISCV_ISA_EXT_##ext) - #endif #endif /* _ASM_RISCV_HWCAP_H */ diff --git a/arch/riscv/include/asm/irq.h b/arch/riscv/include/asm/irq.h index e4c435509983..43b9ebfbd943 100644 --- a/arch/riscv/include/asm/irq.h +++ b/arch/riscv/include/asm/irq.h @@ -12,6 +12,10 @@ #include <asm-generic/irq.h> +void riscv_set_intc_hwnode_fn(struct fwnode_handle *(*fn)(void)); + +struct fwnode_handle *riscv_get_intc_hwnode(void); + extern void __init init_IRQ(void); #endif /* _ASM_RISCV_IRQ_H */ diff --git a/arch/riscv/include/asm/mmu.h b/arch/riscv/include/asm/mmu.h index 5ff1f19fd45c..0099dc116168 100644 --- a/arch/riscv/include/asm/mmu.h +++ b/arch/riscv/include/asm/mmu.h @@ -19,8 +19,6 @@ typedef struct { #ifdef CONFIG_SMP /* A local icache flush is needed before user execution can resume. */ cpumask_t icache_stale_mask; - /* A local tlb flush is needed before user execution can resume. */ - cpumask_t tlb_stale_mask; #endif } mm_context_t; diff --git a/arch/riscv/include/asm/patch.h b/arch/riscv/include/asm/patch.h index f433121774c0..63c98833d510 100644 --- a/arch/riscv/include/asm/patch.h +++ b/arch/riscv/include/asm/patch.h @@ -9,4 +9,6 @@ int patch_text_nosync(void *addr, const void *insns, size_t len); int patch_text(void *addr, u32 *insns, int ninsns); +extern int riscv_patch_in_stop_machine; + #endif /* _ASM_RISCV_PATCH_H */ diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h index ab05f892d317..f641837ccf31 100644 --- a/arch/riscv/include/asm/pgtable.h +++ b/arch/riscv/include/asm/pgtable.h @@ -87,9 +87,13 @@ #define FIXADDR_TOP PCI_IO_START #ifdef CONFIG_64BIT -#define FIXADDR_SIZE PMD_SIZE +#define MAX_FDT_SIZE PMD_SIZE +#define FIX_FDT_SIZE (MAX_FDT_SIZE + SZ_2M) +#define FIXADDR_SIZE (PMD_SIZE + FIX_FDT_SIZE) #else -#define FIXADDR_SIZE PGDIR_SIZE +#define MAX_FDT_SIZE PGDIR_SIZE +#define FIX_FDT_SIZE MAX_FDT_SIZE +#define FIXADDR_SIZE (PGDIR_SIZE + FIX_FDT_SIZE) #endif #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h index 945b7be249c1..acab4410ef2a 100644 --- a/arch/riscv/include/asm/sbi.h +++ b/arch/riscv/include/asm/sbi.h @@ -271,8 +271,7 @@ long sbi_get_marchid(void); long sbi_get_mimpid(void); void sbi_set_timer(uint64_t stime_value); void sbi_shutdown(void); -void sbi_clear_ipi(void); -int sbi_send_ipi(const struct cpumask *cpu_mask); +void sbi_send_ipi(unsigned int cpu); int sbi_remote_fence_i(const struct cpumask *cpu_mask); int sbi_remote_sfence_vma(const struct cpumask *cpu_mask, unsigned long start, @@ -335,4 +334,10 @@ unsigned long riscv_cached_mvendorid(unsigned int cpu_id); unsigned long riscv_cached_marchid(unsigned int cpu_id); unsigned long riscv_cached_mimpid(unsigned int cpu_id); +#if IS_ENABLED(CONFIG_SMP) && IS_ENABLED(CONFIG_RISCV_SBI) +void sbi_ipi_init(void); +#else +static inline void sbi_ipi_init(void) { } +#endif + #endif /* _ASM_RISCV_SBI_H */ diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h index 3831b638ecab..c4b77017ec58 100644 --- a/arch/riscv/include/asm/smp.h +++ b/arch/riscv/include/asm/smp.h @@ -15,12 +15,10 @@ struct seq_file; extern unsigned long boot_cpu_hartid; -struct riscv_ipi_ops { - void (*ipi_inject)(const struct cpumask *target); - void (*ipi_clear)(void); -}; - #ifdef CONFIG_SMP + +#include <linux/jump_label.h> + /* * Mapping between linux logical cpu index and hartid. */ @@ -33,9 +31,6 @@ void show_ipi_stats(struct seq_file *p, int prec); /* SMP initialization hook for setup_arch */ void __init setup_smp(void); -/* Called from C code, this handles an IPI. */ -void handle_IPI(struct pt_regs *regs); - /* Hook for the generic smp_call_function_many() routine. */ void arch_send_call_function_ipi_mask(struct cpumask *mask); @@ -44,11 +39,22 @@ void arch_send_call_function_single_ipi(int cpu); int riscv_hartid_to_cpuid(unsigned long hartid); -/* Set custom IPI operations */ -void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops); +/* Enable IPI for CPU hotplug */ +void riscv_ipi_enable(void); + +/* Disable IPI for CPU hotplug */ +void riscv_ipi_disable(void); -/* Clear IPI for current CPU */ -void riscv_clear_ipi(void); +/* Check if IPI interrupt numbers are available */ +bool riscv_ipi_have_virq_range(void); + +/* Set the IPI interrupt numbers for arch (called by irqchip drivers) */ +void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence); + +/* Check if we can use IPIs for remote FENCEs */ +DECLARE_STATIC_KEY_FALSE(riscv_ipi_for_rfence); +#define riscv_use_ipi_for_rfence() \ + static_branch_unlikely(&riscv_ipi_for_rfence) /* Check other CPUs stop or not */ bool smp_crash_stop_failed(void); @@ -85,14 +91,29 @@ static inline unsigned long cpuid_to_hartid_map(int cpu) return boot_cpu_hartid; } -static inline void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops) +static inline void riscv_ipi_enable(void) +{ +} + +static inline void riscv_ipi_disable(void) { } -static inline void riscv_clear_ipi(void) +static inline bool riscv_ipi_have_virq_range(void) +{ + return false; +} + +static inline void riscv_ipi_set_virq_range(int virq, int nr, + bool use_for_rfence) { } +static inline bool riscv_use_ipi_for_rfence(void) +{ + return false; +} + #endif /* CONFIG_SMP */ #if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP) diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h index 907b9efd39a8..a09196f8de68 100644 --- a/arch/riscv/include/asm/tlbflush.h +++ b/arch/riscv/include/asm/tlbflush.h @@ -12,6 +12,8 @@ #include <asm/errata_list.h> #ifdef CONFIG_MMU +extern unsigned long asid_mask; + static inline void local_flush_tlb_all(void) { __asm__ __volatile__ ("sfence.vma" : : : "memory"); @@ -22,24 +24,6 @@ static inline void local_flush_tlb_page(unsigned long addr) { ALT_FLUSH_TLB_PAGE(__asm__ __volatile__ ("sfence.vma %0" : : "r" (addr) : "memory")); } - -static inline void local_flush_tlb_all_asid(unsigned long asid) -{ - __asm__ __volatile__ ("sfence.vma x0, %0" - : - : "r" (asid) - : "memory"); -} - -static inline void local_flush_tlb_page_asid(unsigned long addr, - unsigned long asid) -{ - __asm__ __volatile__ ("sfence.vma %0, %1" - : - : "r" (addr), "r" (asid) - : "memory"); -} - #else /* CONFIG_MMU */ #define local_flush_tlb_all() do { } while (0) #define local_flush_tlb_page(addr) do { } while (0) diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile index 4cf303a779ab..67f542be1bea 100644 --- a/arch/riscv/kernel/Makefile +++ b/arch/riscv/kernel/Makefile @@ -74,6 +74,7 @@ obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o obj-$(CONFIG_HAVE_PERF_REGS) += perf_regs.o obj-$(CONFIG_RISCV_SBI) += sbi.o ifeq ($(CONFIG_RISCV_SBI), y) +obj-$(CONFIG_SMP) += sbi-ipi.o obj-$(CONFIG_SMP) += cpu_ops_sbi.o endif obj-$(CONFIG_HOTPLUG_CPU) += cpu-hotplug.o diff --git a/arch/riscv/kernel/cacheinfo.c b/arch/riscv/kernel/cacheinfo.c index 3a13113f1b29..e3829d2de5d9 100644 --- a/arch/riscv/kernel/cacheinfo.c +++ b/arch/riscv/kernel/cacheinfo.c @@ -5,7 +5,6 @@ #include <linux/cpu.h> #include <linux/of.h> -#include <linux/of_device.h> #include <asm/cacheinfo.h> static struct riscv_cacheinfo_ops *rv_cache_ops; diff --git a/arch/riscv/kernel/compat_vdso/Makefile b/arch/riscv/kernel/compat_vdso/Makefile index 260daf3236d3..7f34f3c7c882 100644 --- a/arch/riscv/kernel/compat_vdso/Makefile +++ b/arch/riscv/kernel/compat_vdso/Makefile @@ -14,6 +14,10 @@ COMPAT_LD := $(LD) COMPAT_CC_FLAGS := -march=rv32g -mabi=ilp32 COMPAT_LD_FLAGS := -melf32lriscv +# Disable attributes, as they're useless and break the build. +COMPAT_CC_FLAGS += $(call cc-option,-mno-riscv-attribute) +COMPAT_CC_FLAGS += $(call as-option,-Wa$(comma)-mno-arch-attr) + # Files to link into the compat_vdso obj-compat_vdso = $(patsubst %, %.o, $(compat_vdso-syms)) note.o diff --git a/arch/riscv/kernel/cpu-hotplug.c b/arch/riscv/kernel/cpu-hotplug.c index f7a832e3a1d1..39235cf50652 100644 --- a/arch/riscv/kernel/cpu-hotplug.c +++ b/arch/riscv/kernel/cpu-hotplug.c @@ -13,7 +13,7 @@ #include <asm/irq.h> #include <asm/cpu_ops.h> #include <asm/numa.h> -#include <asm/sbi.h> +#include <asm/smp.h> bool cpu_has_hotplug(unsigned int cpu) { @@ -43,6 +43,7 @@ int __cpu_disable(void) remove_cpu_topology(cpu); numa_remove_cpu(cpu); set_cpu_online(cpu, false); + riscv_ipi_disable(); irq_migrate_all_off_this_cpu(); return ret; diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c index 5bff37af4770..03a6434a8cdd 100644 --- a/arch/riscv/kernel/ftrace.c +++ b/arch/riscv/kernel/ftrace.c @@ -15,10 +15,19 @@ void ftrace_arch_code_modify_prepare(void) __acquires(&text_mutex) { mutex_lock(&text_mutex); + + /* + * The code sequences we use for ftrace can't be patched while the + * kernel is running, so we need to use stop_machine() to modify them + * for now. This doesn't play nice with text_mutex, we use this flag + * to elide the check. + */ + riscv_patch_in_stop_machine = true; } void ftrace_arch_code_modify_post_process(void) __releases(&text_mutex) { + riscv_patch_in_stop_machine = false; mutex_unlock(&text_mutex); } @@ -107,9 +116,9 @@ int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec) { int out; - ftrace_arch_code_modify_prepare(); + mutex_lock(&text_mutex); out = ftrace_make_nop(mod, rec, MCOUNT_ADDR); - ftrace_arch_code_modify_post_process(); + mutex_unlock(&text_mutex); return out; } diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c index 7207fa08d78f..eb9a68a539e6 100644 --- a/arch/riscv/kernel/irq.c +++ b/arch/riscv/kernel/irq.c @@ -7,8 +7,26 @@ #include <linux/interrupt.h> #include <linux/irqchip.h> +#include <linux/irqdomain.h> +#include <linux/module.h> #include <linux/seq_file.h> -#include <asm/smp.h> +#include <asm/sbi.h> + +static struct fwnode_handle *(*__get_intc_node)(void); + +void riscv_set_intc_hwnode_fn(struct fwnode_handle *(*fn)(void)) +{ + __get_intc_node = fn; +} + +struct fwnode_handle *riscv_get_intc_hwnode(void) +{ + if (__get_intc_node) + return __get_intc_node(); + + return NULL; +} +EXPORT_SYMBOL_GPL(riscv_get_intc_hwnode); int arch_show_interrupts(struct seq_file *p, int prec) { @@ -21,4 +39,5 @@ void __init init_IRQ(void) irqchip_init(); if (!handle_arch_irq) panic("No interrupt controller found."); + sbi_ipi_init(); } diff --git a/arch/riscv/kernel/patch.c b/arch/riscv/kernel/patch.c index 8086d1a281cd..575e71d6c8ae 100644 --- a/arch/riscv/kernel/patch.c +++ b/arch/riscv/kernel/patch.c @@ -11,6 +11,7 @@ #include <asm/kprobes.h> #include <asm/cacheflush.h> #include <asm/fixmap.h> +#include <asm/ftrace.h> #include <asm/patch.h> struct patch_insn { @@ -20,6 +21,8 @@ struct patch_insn { atomic_t cpu_count; }; +int riscv_patch_in_stop_machine = false; + #ifdef CONFIG_MMU /* * The fix_to_virt(, idx) needs a const value (not a dynamic variable of @@ -60,8 +63,15 @@ static int patch_insn_write(void *addr, const void *insn, size_t len) * Before reaching here, it was expected to lock the text_mutex * already, so we don't need to give another lock here and could * ensure that it was safe between each cores. + * + * We're currently using stop_machine() for ftrace & kprobes, and while + * that ensures text_mutex is held before installing the mappings it + * does not ensure text_mutex is held by the calling thread. That's + * safe but triggers a lockdep failure, so just elide it for that + * specific case. */ - lockdep_assert_held(&text_mutex); + if (!riscv_patch_in_stop_machine) + lockdep_assert_held(&text_mutex); if (across_pages) patch_map(addr + len, FIX_TEXT_POKE1); @@ -125,6 +135,7 @@ NOKPROBE_SYMBOL(patch_text_cb); int patch_text(void *addr, u32 *insns, int ninsns) { + int ret; struct patch_insn patch = { .addr = addr, .insns = insns, @@ -132,7 +143,18 @@ int patch_text(void *addr, u32 *insns, int ninsns) .cpu_count = ATOMIC_INIT(0), }; - return stop_machine_cpuslocked(patch_text_cb, - &patch, cpu_online_mask); + /* + * kprobes takes text_mutex, before calling patch_text(), but as we call + * calls stop_machine(), the lockdep assertion in patch_insn_write() + * gets confused by the context in which the lock is taken. + * Instead, ensure the lock is held before calling stop_machine(), and + * set riscv_patch_in_stop_machine to skip the check in + * patch_insn_write(). + */ + lockdep_assert_held(&text_mutex); + riscv_patch_in_stop_machine = true; + ret = stop_machine_cpuslocked(patch_text_cb, &patch, cpu_online_mask); + riscv_patch_in_stop_machine = false; + return ret; } NOKPROBE_SYMBOL(patch_text); diff --git a/arch/riscv/kernel/sbi-ipi.c b/arch/riscv/kernel/sbi-ipi.c new file mode 100644 index 000000000000..a4559695ce62 --- /dev/null +++ b/arch/riscv/kernel/sbi-ipi.c @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Multiplex several IPIs over a single HW IPI. + * + * Copyright (c) 2022 Ventana Micro Systems Inc. + */ + +#define pr_fmt(fmt) "riscv: " fmt +#include <linux/cpu.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqdomain.h> +#include <asm/sbi.h> + +static int sbi_ipi_virq; + +static void sbi_ipi_handle(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); + + csr_clear(CSR_IP, IE_SIE); + ipi_mux_process(); + + chained_irq_exit(chip, desc); +} + +static int sbi_ipi_starting_cpu(unsigned int cpu) +{ + enable_percpu_irq(sbi_ipi_virq, irq_get_trigger_type(sbi_ipi_virq)); + return 0; +} + +void __init sbi_ipi_init(void) +{ + int virq; + struct irq_domain *domain; + + if (riscv_ipi_have_virq_range()) + return; + + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), + DOMAIN_BUS_ANY); + if (!domain) { + pr_err("unable to find INTC IRQ domain\n"); + return; + } + + sbi_ipi_virq = irq_create_mapping(domain, RV_IRQ_SOFT); + if (!sbi_ipi_virq) { + pr_err("unable to create INTC IRQ mapping\n"); + return; + } + + virq = ipi_mux_create(BITS_PER_BYTE, sbi_send_ipi); + if (virq <= 0) { + pr_err("unable to create muxed IPIs\n"); + irq_dispose_mapping(sbi_ipi_virq); + return; + } + + irq_set_chained_handler(sbi_ipi_virq, sbi_ipi_handle); + + /* + * Don't disable IPI when CPU goes offline because + * the masking/unmasking of virtual IPIs is done + * via generic IPI-Mux + */ + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, + "irqchip/sbi-ipi:starting", + sbi_ipi_starting_cpu, NULL); + + riscv_ipi_set_virq_range(virq, BITS_PER_BYTE, false); + pr_info("providing IPIs using SBI IPI extension\n"); +} diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c index 5c87db8fdff2..92b9b759ab3d 100644 --- a/arch/riscv/kernel/sbi.c +++ b/arch/riscv/kernel/sbi.c @@ -17,7 +17,7 @@ unsigned long sbi_spec_version __ro_after_init = SBI_SPEC_VERSION_DEFAULT; EXPORT_SYMBOL(sbi_spec_version); static void (*__sbi_set_timer)(uint64_t stime) __ro_after_init; -static int (*__sbi_send_ipi)(const struct cpumask *cpu_mask) __ro_after_init; +static void (*__sbi_send_ipi)(unsigned int cpu) __ro_after_init; static int (*__sbi_rfence)(int fid, const struct cpumask *cpu_mask, unsigned long start, unsigned long size, unsigned long arg4, unsigned long arg5) __ro_after_init; @@ -131,17 +131,6 @@ void sbi_shutdown(void) EXPORT_SYMBOL(sbi_shutdown); /** - * sbi_clear_ipi() - Clear any pending IPIs for the calling hart. - * - * Return: None - */ -void sbi_clear_ipi(void) -{ - sbi_ecall(SBI_EXT_0_1_CLEAR_IPI, 0, 0, 0, 0, 0, 0, 0); -} -EXPORT_SYMBOL(sbi_clear_ipi); - -/** * __sbi_set_timer_v01() - Program the timer for next timer event. * @stime_value: The value after which next timer event should fire. * @@ -157,17 +146,12 @@ static void __sbi_set_timer_v01(uint64_t stime_value) #endif } -static int __sbi_send_ipi_v01(const struct cpumask *cpu_mask) +static void __sbi_send_ipi_v01(unsigned int cpu) { - unsigned long hart_mask; - - if (!cpu_mask || cpumask_empty(cpu_mask)) - cpu_mask = cpu_online_mask; - hart_mask = __sbi_v01_cpumask_to_hartmask(cpu_mask); - + unsigned long hart_mask = + __sbi_v01_cpumask_to_hartmask(cpumask_of(cpu)); sbi_ecall(SBI_EXT_0_1_SEND_IPI, 0, (unsigned long)(&hart_mask), 0, 0, 0, 0, 0); - return 0; } static int __sbi_rfence_v01(int fid, const struct cpumask *cpu_mask, @@ -216,12 +200,10 @@ static void __sbi_set_timer_v01(uint64_t stime_value) sbi_major_version(), sbi_minor_version()); } -static int __sbi_send_ipi_v01(const struct cpumask *cpu_mask) +static void __sbi_send_ipi_v01(unsigned int cpu) { pr_warn("IPI extension is not available in SBI v%lu.%lu\n", sbi_major_version(), sbi_minor_version()); - - return 0; } static int __sbi_rfence_v01(int fid, const struct cpumask *cpu_mask, @@ -248,55 +230,18 @@ static void __sbi_set_timer_v02(uint64_t stime_value) #endif } -static int __sbi_send_ipi_v02(const struct cpumask *cpu_mask) +static void __sbi_send_ipi_v02(unsigned int cpu) { - unsigned long hartid, cpuid, hmask = 0, hbase = 0, htop = 0; - struct sbiret ret = {0}; int result; + struct sbiret ret = {0}; - if (!cpu_mask || cpumask_empty(cpu_mask)) - cpu_mask = cpu_online_mask; - - for_each_cpu(cpuid, cpu_mask) { - hartid = cpuid_to_hartid_map(cpuid); - if (hmask) { - if (hartid + BITS_PER_LONG <= htop || - hbase + BITS_PER_LONG <= hartid) { - ret = sbi_ecall(SBI_EXT_IPI, - SBI_EXT_IPI_SEND_IPI, hmask, - hbase, 0, 0, 0, 0); - if (ret.error) - goto ecall_failed; - hmask = 0; - } else if (hartid < hbase) { - /* shift the mask to fit lower hartid */ - hmask <<= hbase - hartid; - hbase = hartid; - } - } - if (!hmask) { - hbase = hartid; - htop = hartid; - } else if (hartid > htop) { - htop = hartid; - } - hmask |= BIT(hartid - hbase); - } - - if (hmask) { - ret = sbi_ecall(SBI_EXT_IPI, SBI_EXT_IPI_SEND_IPI, - hmask, hbase, 0, 0, 0, 0); - if (ret.error) - goto ecall_failed; + ret = sbi_ecall(SBI_EXT_IPI, SBI_EXT_IPI_SEND_IPI, + 1UL, cpuid_to_hartid_map(cpu), 0, 0, 0, 0); + if (ret.error) { + result = sbi_err_map_linux_errno(ret.error); + pr_err("%s: hbase = [%lu] failed (error [%d])\n", + __func__, cpuid_to_hartid_map(cpu), result); } - - return 0; - -ecall_failed: - result = sbi_err_map_linux_errno(ret.error); - pr_err("%s: hbase = [%lu] hmask = [0x%lx] failed (error [%d])\n", - __func__, hbase, hmask, result); - return result; } static int __sbi_rfence_v02_call(unsigned long fid, unsigned long hmask, @@ -410,13 +355,11 @@ void sbi_set_timer(uint64_t stime_value) /** * sbi_send_ipi() - Send an IPI to any hart. - * @cpu_mask: A cpu mask containing all the target harts. - * - * Return: 0 on success, appropriate linux error code otherwise. + * @cpu: Logical id of the target CPU. */ -int sbi_send_ipi(const struct cpumask *cpu_mask) +void sbi_send_ipi(unsigned int cpu) { - return __sbi_send_ipi(cpu_mask); + __sbi_send_ipi(cpu); } EXPORT_SYMBOL(sbi_send_ipi); @@ -641,15 +584,6 @@ long sbi_get_mimpid(void) } EXPORT_SYMBOL_GPL(sbi_get_mimpid); -static void sbi_send_cpumask_ipi(const struct cpumask *target) -{ - sbi_send_ipi(target); -} - -static const struct riscv_ipi_ops sbi_ipi_ops = { - .ipi_inject = sbi_send_cpumask_ipi -}; - void __init sbi_init(void) { int ret; @@ -696,6 +630,4 @@ void __init sbi_init(void) __sbi_send_ipi = __sbi_send_ipi_v01; __sbi_rfence = __sbi_rfence_v01; } - - riscv_set_ipi_ops(&sbi_ipi_ops); } diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c index 376d2827e736..3020f44dcf58 100644 --- a/arch/riscv/kernel/setup.c +++ b/arch/riscv/kernel/setup.c @@ -8,6 +8,7 @@ * Nick Kossifidis <mick@ics.forth.gr> */ +#include <linux/cpu.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/memblock.h> @@ -15,7 +16,6 @@ #include <linux/console.h> #include <linux/screen_info.h> #include <linux/of_fdt.h> -#include <linux/of_platform.h> #include <linux/sched/task.h> #include <linux/smp.h> #include <linux/efi.h> @@ -278,12 +278,8 @@ void __init setup_arch(char **cmdline_p) #if IS_ENABLED(CONFIG_BUILTIN_DTB) unflatten_and_copy_device_tree(); #else - if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa)))) - unflatten_device_tree(); - else - pr_err("No DTB found in kernel mappings\n"); + unflatten_device_tree(); #endif - early_init_fdt_scan_reserved_mem(); misc_mem_init(); init_resources(); diff --git a/arch/riscv/kernel/signal.c b/arch/riscv/kernel/signal.c index bfb2afa4135f..dee66c9290cc 100644 --- a/arch/riscv/kernel/signal.c +++ b/arch/riscv/kernel/signal.c @@ -19,6 +19,7 @@ #include <asm/signal32.h> #include <asm/switch_to.h> #include <asm/csr.h> +#include <asm/cacheflush.h> extern u32 __user_rt_sigreturn[2]; @@ -181,6 +182,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, { struct rt_sigframe __user *frame; long err = 0; + unsigned long __maybe_unused addr; frame = get_sigframe(ksig, regs, sizeof(*frame)); if (!access_ok(frame, sizeof(*frame))) @@ -209,7 +211,12 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, if (copy_to_user(&frame->sigreturn_code, __user_rt_sigreturn, sizeof(frame->sigreturn_code))) return -EFAULT; - regs->ra = (unsigned long)&frame->sigreturn_code; + + addr = (unsigned long)&frame->sigreturn_code; + /* Make sure the two instructions are pushed to icache. */ + flush_icache_range(addr, addr + sizeof(frame->sigreturn_code)); + + regs->ra = addr; #endif /* CONFIG_MMU */ /* diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c index 8c3b59f1f9b8..5f985a197eff 100644 --- a/arch/riscv/kernel/smp.c +++ b/arch/riscv/kernel/smp.c @@ -13,14 +13,15 @@ #include <linux/interrupt.h> #include <linux/module.h> #include <linux/kexec.h> +#include <linux/percpu.h> #include <linux/profile.h> #include <linux/smp.h> #include <linux/sched.h> #include <linux/seq_file.h> #include <linux/delay.h> +#include <linux/irq.h> #include <linux/irq_work.h> -#include <asm/sbi.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> #include <asm/cpu_ops.h> @@ -44,11 +45,10 @@ void __init smp_setup_processor_id(void) cpuid_to_hartid_map(0) = boot_cpu_hartid; } -/* A collection of single bit ipi messages. */ -static struct { - unsigned long stats[IPI_MAX] ____cacheline_aligned; - unsigned long bits ____cacheline_aligned; -} ipi_data[NR_CPUS] __cacheline_aligned; +static DEFINE_PER_CPU_READ_MOSTLY(int, ipi_dummy_dev); +static int ipi_virq_base __ro_after_init; +static int nr_ipi __ro_after_init = IPI_MAX; +static struct irq_desc *ipi_desc[IPI_MAX] __read_mostly; int riscv_hartid_to_cpuid(unsigned long hartid) { @@ -100,48 +100,14 @@ static inline void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs) } #endif -static const struct riscv_ipi_ops *ipi_ops __ro_after_init; - -void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops) -{ - ipi_ops = ops; -} -EXPORT_SYMBOL_GPL(riscv_set_ipi_ops); - -void riscv_clear_ipi(void) -{ - if (ipi_ops && ipi_ops->ipi_clear) - ipi_ops->ipi_clear(); - - csr_clear(CSR_IP, IE_SIE); -} -EXPORT_SYMBOL_GPL(riscv_clear_ipi); - static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op) { - int cpu; - - smp_mb__before_atomic(); - for_each_cpu(cpu, mask) - set_bit(op, &ipi_data[cpu].bits); - smp_mb__after_atomic(); - - if (ipi_ops && ipi_ops->ipi_inject) - ipi_ops->ipi_inject(mask); - else - pr_warn("SMP: IPI inject method not available\n"); + __ipi_send_mask(ipi_desc[op], mask); } static void send_ipi_single(int cpu, enum ipi_message_type op) { - smp_mb__before_atomic(); - set_bit(op, &ipi_data[cpu].bits); - smp_mb__after_atomic(); - - if (ipi_ops && ipi_ops->ipi_inject) - ipi_ops->ipi_inject(cpumask_of(cpu)); - else - pr_warn("SMP: IPI inject method not available\n"); + __ipi_send_mask(ipi_desc[op], cpumask_of(cpu)); } #ifdef CONFIG_IRQ_WORK @@ -151,59 +117,98 @@ void arch_irq_work_raise(void) } #endif -void handle_IPI(struct pt_regs *regs) +static irqreturn_t handle_IPI(int irq, void *data) { - unsigned int cpu = smp_processor_id(); - unsigned long *pending_ipis = &ipi_data[cpu].bits; - unsigned long *stats = ipi_data[cpu].stats; + int ipi = irq - ipi_virq_base; + + switch (ipi) { + case IPI_RESCHEDULE: + scheduler_ipi(); + break; + case IPI_CALL_FUNC: + generic_smp_call_function_interrupt(); + break; + case IPI_CPU_STOP: + ipi_stop(); + break; + case IPI_CPU_CRASH_STOP: + ipi_cpu_crash_stop(smp_processor_id(), get_irq_regs()); + break; + case IPI_IRQ_WORK: + irq_work_run(); + break; +#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST + case IPI_TIMER: + tick_receive_broadcast(); + break; +#endif + default: + pr_warn("CPU%d: unhandled IPI%d\n", smp_processor_id(), ipi); + break; + } - riscv_clear_ipi(); + return IRQ_HANDLED; +} - while (true) { - unsigned long ops; +void riscv_ipi_enable(void) +{ + int i; - /* Order bit clearing and data access. */ - mb(); + if (WARN_ON_ONCE(!ipi_virq_base)) + return; - ops = xchg(pending_ipis, 0); - if (ops == 0) - return; + for (i = 0; i < nr_ipi; i++) + enable_percpu_irq(ipi_virq_base + i, 0); +} - if (ops & (1 << IPI_RESCHEDULE)) { - stats[IPI_RESCHEDULE]++; - scheduler_ipi(); - } +void riscv_ipi_disable(void) +{ + int i; - if (ops & (1 << IPI_CALL_FUNC)) { - stats[IPI_CALL_FUNC]++; - generic_smp_call_function_interrupt(); - } + if (WARN_ON_ONCE(!ipi_virq_base)) + return; - if (ops & (1 << IPI_CPU_STOP)) { - stats[IPI_CPU_STOP]++; - ipi_stop(); - } + for (i = 0; i < nr_ipi; i++) + disable_percpu_irq(ipi_virq_base + i); +} - if (ops & (1 << IPI_CPU_CRASH_STOP)) { - ipi_cpu_crash_stop(cpu, get_irq_regs()); - } +bool riscv_ipi_have_virq_range(void) +{ + return (ipi_virq_base) ? true : false; +} - if (ops & (1 << IPI_IRQ_WORK)) { - stats[IPI_IRQ_WORK]++; - irq_work_run(); - } +DEFINE_STATIC_KEY_FALSE(riscv_ipi_for_rfence); +EXPORT_SYMBOL_GPL(riscv_ipi_for_rfence); -#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST - if (ops & (1 << IPI_TIMER)) { - stats[IPI_TIMER]++; - tick_receive_broadcast(); - } -#endif - BUG_ON((ops >> IPI_MAX) != 0); +void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence) +{ + int i, err; + + if (WARN_ON(ipi_virq_base)) + return; + + WARN_ON(nr < IPI_MAX); + nr_ipi = min(nr, IPI_MAX); + ipi_virq_base = virq; - /* Order data access and bit testing. */ - mb(); + /* Request IPIs */ + for (i = 0; i < nr_ipi; i++) { + err = request_percpu_irq(ipi_virq_base + i, handle_IPI, + "IPI", &ipi_dummy_dev); + WARN_ON(err); + + ipi_desc[i] = irq_to_desc(ipi_virq_base + i); + irq_set_status_flags(ipi_virq_base + i, IRQ_HIDDEN); } + + /* Enabled IPIs for boot CPU immediately */ + riscv_ipi_enable(); + + /* Update RFENCE static key */ + if (use_for_rfence) + static_branch_enable(&riscv_ipi_for_rfence); + else + static_branch_disable(&riscv_ipi_for_rfence); } static const char * const ipi_names[] = { @@ -223,7 +228,7 @@ void show_ipi_stats(struct seq_file *p, int prec) seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i, prec >= 4 ? " " : ""); for_each_online_cpu(cpu) - seq_printf(p, "%10lu ", ipi_data[cpu].stats[i]); + seq_printf(p, "%10u ", irq_desc_kstat_cpu(ipi_desc[i], cpu)); seq_printf(p, " %s\n", ipi_names[i]); } } diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c index ddb2afba6d25..00b53913d4c6 100644 --- a/arch/riscv/kernel/smpboot.c +++ b/arch/riscv/kernel/smpboot.c @@ -30,7 +30,6 @@ #include <asm/numa.h> #include <asm/tlbflush.h> #include <asm/sections.h> -#include <asm/sbi.h> #include <asm/smp.h> #include "head.h" @@ -158,12 +157,12 @@ asmlinkage __visible void smp_callin(void) struct mm_struct *mm = &init_mm; unsigned int curr_cpuid = smp_processor_id(); - riscv_clear_ipi(); - /* All kernel threads share the same mm context. */ mmgrab(mm); current->active_mm = mm; + riscv_ipi_enable(); + store_cpu_topology(curr_cpuid); notify_cpu_starting(curr_cpuid); numa_add_cpu(curr_cpuid); diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c index f9a5a7c90ff0..64a9c093aef9 100644 --- a/arch/riscv/kernel/stacktrace.c +++ b/arch/riscv/kernel/stacktrace.c @@ -101,7 +101,7 @@ void notrace walk_stackframe(struct task_struct *task, while (!kstack_end(ksp)) { if (__kernel_text_address(pc) && unlikely(!fn(arg, pc))) break; - pc = (*ksp++) - 0x4; + pc = READ_ONCE_NOCHECK(*ksp++) - 0x4; } } diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile index 06e6b27f3bcc..a04b3bc35ca2 100644 --- a/arch/riscv/kernel/vdso/Makefile +++ b/arch/riscv/kernel/vdso/Makefile @@ -1,9 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only # Copied from arch/tile/kernel/vdso/Makefile -# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before -# the inclusion of generic Makefile. -ARCH_REL_TYPE_ABS := R_RISCV_32|R_RISCV_64|R_RISCV_JUMP_SLOT +# Include the generic Makefile to check the built vdso. include $(srctree)/lib/vdso/Makefile # Symbols present in the vdso vdso-syms = rt_sigreturn diff --git a/arch/riscv/kvm/Kconfig b/arch/riscv/kvm/Kconfig index d5a658a047a7..5682d8c017b3 100644 --- a/arch/riscv/kvm/Kconfig +++ b/arch/riscv/kvm/Kconfig @@ -28,7 +28,6 @@ config KVM select KVM_XFER_TO_GUEST_WORK select HAVE_KVM_VCPU_ASYNC_IOCTL select HAVE_KVM_EVENTFD - select SRCU help Support hosting virtualized guest machines. diff --git a/arch/riscv/kvm/vcpu_timer.c b/arch/riscv/kvm/vcpu_timer.c index ad34519c8a13..3ac2ff6a65da 100644 --- a/arch/riscv/kvm/vcpu_timer.c +++ b/arch/riscv/kvm/vcpu_timer.c @@ -147,10 +147,8 @@ static void kvm_riscv_vcpu_timer_blocking(struct kvm_vcpu *vcpu) return; delta_ns = kvm_riscv_delta_cycles2ns(t->next_cycles, gt, t); - if (delta_ns) { - hrtimer_start(&t->hrt, ktime_set(0, delta_ns), HRTIMER_MODE_REL); - t->next_set = true; - } + hrtimer_start(&t->hrt, ktime_set(0, delta_ns), HRTIMER_MODE_REL); + t->next_set = true; } static void kvm_riscv_vcpu_timer_unblocking(struct kvm_vcpu *vcpu) diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c index fcd6145fbead..20cec5e7cdbf 100644 --- a/arch/riscv/mm/cacheflush.c +++ b/arch/riscv/mm/cacheflush.c @@ -19,7 +19,7 @@ void flush_icache_all(void) { local_flush_icache_all(); - if (IS_ENABLED(CONFIG_RISCV_SBI)) + if (IS_ENABLED(CONFIG_RISCV_SBI) && !riscv_use_ipi_for_rfence()) sbi_remote_fence_i(NULL); else on_each_cpu(ipi_remote_fence_i, NULL, 1); @@ -67,7 +67,8 @@ void flush_icache_mm(struct mm_struct *mm, bool local) * with flush_icache_deferred(). */ smp_mb(); - } else if (IS_ENABLED(CONFIG_RISCV_SBI)) { + } else if (IS_ENABLED(CONFIG_RISCV_SBI) && + !riscv_use_ipi_for_rfence()) { sbi_remote_fence_i(&others); } else { on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1); diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c index 80ce9caba8d2..12e22e7330e7 100644 --- a/arch/riscv/mm/context.c +++ b/arch/riscv/mm/context.c @@ -22,7 +22,7 @@ DEFINE_STATIC_KEY_FALSE(use_asid_allocator); static unsigned long asid_bits; static unsigned long num_asids; -static unsigned long asid_mask; +unsigned long asid_mask; static atomic_long_t current_version; @@ -196,16 +196,6 @@ switch_mm_fast: if (need_flush_tlb) local_flush_tlb_all(); -#ifdef CONFIG_SMP - else { - cpumask_t *mask = &mm->context.tlb_stale_mask; - - if (cpumask_test_cpu(cpu, mask)) { - cpumask_clear_cpu(cpu, mask); - local_flush_tlb_all_asid(cntx & asid_mask); - } - } -#endif } static void set_mm_noasid(struct mm_struct *mm) @@ -215,12 +205,24 @@ static void set_mm_noasid(struct mm_struct *mm) local_flush_tlb_all(); } -static inline void set_mm(struct mm_struct *mm, unsigned int cpu) +static inline void set_mm(struct mm_struct *prev, + struct mm_struct *next, unsigned int cpu) { - if (static_branch_unlikely(&use_asid_allocator)) - set_mm_asid(mm, cpu); - else - set_mm_noasid(mm); + /* + * The mm_cpumask indicates which harts' TLBs contain the virtual + * address mapping of the mm. Compared to noasid, using asid + * can't guarantee that stale TLB entries are invalidated because + * the asid mechanism wouldn't flush TLB for every switch_mm for + * performance. So when using asid, keep all CPUs footmarks in + * cpumask() until mm reset. + */ + cpumask_set_cpu(cpu, mm_cpumask(next)); + if (static_branch_unlikely(&use_asid_allocator)) { + set_mm_asid(next, cpu); + } else { + cpumask_clear_cpu(cpu, mm_cpumask(prev)); + set_mm_noasid(next); + } } static int __init asids_init(void) @@ -274,7 +276,8 @@ static int __init asids_init(void) } early_initcall(asids_init); #else -static inline void set_mm(struct mm_struct *mm, unsigned int cpu) +static inline void set_mm(struct mm_struct *prev, + struct mm_struct *next, unsigned int cpu) { /* Nothing to do here when there is no MMU */ } @@ -327,10 +330,7 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next, */ cpu = smp_processor_id(); - cpumask_clear_cpu(cpu, mm_cpumask(prev)); - cpumask_set_cpu(cpu, mm_cpumask(next)); - - set_mm(next, cpu); + set_mm(prev, next, cpu); flush_icache_deferred(next, cpu); } diff --git a/arch/riscv/mm/fault.c b/arch/riscv/mm/fault.c index 460f785f6e09..d5f3e501dffb 100644 --- a/arch/riscv/mm/fault.c +++ b/arch/riscv/mm/fault.c @@ -143,6 +143,8 @@ static inline void vmalloc_fault(struct pt_regs *regs, int code, unsigned long a no_context(regs, addr); return; } + if (pud_leaf(*pud_k)) + goto flush_tlb; /* * Since the vmalloc area is global, it is unnecessary @@ -153,6 +155,8 @@ static inline void vmalloc_fault(struct pt_regs *regs, int code, unsigned long a no_context(regs, addr); return; } + if (pmd_leaf(*pmd_k)) + goto flush_tlb; /* * Make sure the actual PTE exists as well to @@ -172,6 +176,7 @@ static inline void vmalloc_fault(struct pt_regs *regs, int code, unsigned long a * ordering constraint, not a cache flush; it is * necessary even after writing invalid entries. */ +flush_tlb: local_flush_tlb_page(addr); } diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index 478d6763a01a..0f14f4a8d179 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -57,7 +57,6 @@ unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)] EXPORT_SYMBOL(empty_zero_page); extern char _start[]; -#define DTB_EARLY_BASE_VA PGDIR_SIZE void *_dtb_early_va __initdata; uintptr_t _dtb_early_pa __initdata; @@ -236,31 +235,22 @@ static void __init setup_bootmem(void) set_max_mapnr(max_low_pfn - ARCH_PFN_OFFSET); reserve_initrd_mem(); + + /* + * No allocation should be done before reserving the memory as defined + * in the device tree, otherwise the allocation could end up in a + * reserved region. + */ + early_init_fdt_scan_reserved_mem(); + /* * If DTB is built in, no need to reserve its memblock. * Otherwise, do reserve it but avoid using * early_init_fdt_reserve_self() since __pa() does * not work for DTB pointers that are fixmap addresses */ - if (!IS_ENABLED(CONFIG_BUILTIN_DTB)) { - /* - * In case the DTB is not located in a memory region we won't - * be able to locate it later on via the linear mapping and - * get a segfault when accessing it via __va(dtb_early_pa). - * To avoid this situation copy DTB to a memory region. - * Note that memblock_phys_alloc will also reserve DTB region. - */ - if (!memblock_is_memory(dtb_early_pa)) { - size_t fdt_size = fdt_totalsize(dtb_early_va); - phys_addr_t new_dtb_early_pa = memblock_phys_alloc(fdt_size, PAGE_SIZE); - void *new_dtb_early_va = early_memremap(new_dtb_early_pa, fdt_size); - - memcpy(new_dtb_early_va, dtb_early_va, fdt_size); - early_memunmap(new_dtb_early_va, fdt_size); - _dtb_early_pa = new_dtb_early_pa; - } else - memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va)); - } + if (!IS_ENABLED(CONFIG_BUILTIN_DTB)) + memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va)); dma_contiguous_reserve(dma32_phys_limit); if (IS_ENABLED(CONFIG_64BIT)) @@ -279,9 +269,6 @@ pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss; static pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss; pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE); -static p4d_t __maybe_unused early_dtb_p4d[PTRS_PER_P4D] __initdata __aligned(PAGE_SIZE); -static pud_t __maybe_unused early_dtb_pud[PTRS_PER_PUD] __initdata __aligned(PAGE_SIZE); -static pmd_t __maybe_unused early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE); #ifdef CONFIG_XIP_KERNEL #define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&pt_ops)) @@ -626,9 +613,6 @@ static void __init create_p4d_mapping(p4d_t *p4dp, #define trampoline_pgd_next (pgtable_l5_enabled ? \ (uintptr_t)trampoline_p4d : (pgtable_l4_enabled ? \ (uintptr_t)trampoline_pud : (uintptr_t)trampoline_pmd)) -#define early_dtb_pgd_next (pgtable_l5_enabled ? \ - (uintptr_t)early_dtb_p4d : (pgtable_l4_enabled ? \ - (uintptr_t)early_dtb_pud : (uintptr_t)early_dtb_pmd)) #else #define pgd_next_t pte_t #define alloc_pgd_next(__va) pt_ops.alloc_pte(__va) @@ -636,7 +620,6 @@ static void __init create_p4d_mapping(p4d_t *p4dp, #define create_pgd_next_mapping(__nextp, __va, __pa, __sz, __prot) \ create_pte_mapping(__nextp, __va, __pa, __sz, __prot) #define fixmap_pgd_next ((uintptr_t)fixmap_pte) -#define early_dtb_pgd_next ((uintptr_t)early_dtb_pmd) #define create_p4d_mapping(__pmdp, __va, __pa, __sz, __prot) do {} while(0) #define create_pud_mapping(__pmdp, __va, __pa, __sz, __prot) do {} while(0) #define create_pmd_mapping(__pmdp, __va, __pa, __sz, __prot) do {} while(0) @@ -860,32 +843,28 @@ static void __init create_kernel_page_table(pgd_t *pgdir, bool early) * this means 2 PMD entries whereas for 32-bit kernel, this is only 1 PGDIR * entry. */ -static void __init create_fdt_early_page_table(pgd_t *pgdir, uintptr_t dtb_pa) +static void __init create_fdt_early_page_table(pgd_t *pgdir, + uintptr_t fix_fdt_va, + uintptr_t dtb_pa) { -#ifndef CONFIG_BUILTIN_DTB uintptr_t pa = dtb_pa & ~(PMD_SIZE - 1); - create_pgd_mapping(early_pg_dir, DTB_EARLY_BASE_VA, - IS_ENABLED(CONFIG_64BIT) ? early_dtb_pgd_next : pa, - PGDIR_SIZE, - IS_ENABLED(CONFIG_64BIT) ? PAGE_TABLE : PAGE_KERNEL); - - if (pgtable_l5_enabled) - create_p4d_mapping(early_dtb_p4d, DTB_EARLY_BASE_VA, - (uintptr_t)early_dtb_pud, P4D_SIZE, PAGE_TABLE); - - if (pgtable_l4_enabled) - create_pud_mapping(early_dtb_pud, DTB_EARLY_BASE_VA, - (uintptr_t)early_dtb_pmd, PUD_SIZE, PAGE_TABLE); +#ifndef CONFIG_BUILTIN_DTB + /* Make sure the fdt fixmap address is always aligned on PMD size */ + BUILD_BUG_ON(FIX_FDT % (PMD_SIZE / PAGE_SIZE)); - if (IS_ENABLED(CONFIG_64BIT)) { - create_pmd_mapping(early_dtb_pmd, DTB_EARLY_BASE_VA, + /* In 32-bit only, the fdt lies in its own PGD */ + if (!IS_ENABLED(CONFIG_64BIT)) { + create_pgd_mapping(early_pg_dir, fix_fdt_va, + pa, MAX_FDT_SIZE, PAGE_KERNEL); + } else { + create_pmd_mapping(fixmap_pmd, fix_fdt_va, pa, PMD_SIZE, PAGE_KERNEL); - create_pmd_mapping(early_dtb_pmd, DTB_EARLY_BASE_VA + PMD_SIZE, + create_pmd_mapping(fixmap_pmd, fix_fdt_va + PMD_SIZE, pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL); } - dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1)); + dtb_early_va = (void *)fix_fdt_va + (dtb_pa & (PMD_SIZE - 1)); #else /* * For 64-bit kernel, __va can't be used since it would return a linear @@ -1055,7 +1034,8 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa) create_kernel_page_table(early_pg_dir, true); /* Setup early mapping for FDT early scan */ - create_fdt_early_page_table(early_pg_dir, dtb_pa); + create_fdt_early_page_table(early_pg_dir, + __fix_to_virt(FIX_FDT), dtb_pa); /* * Bootime fixmap only can handle PMD_SIZE mapping. Thus, boot-ioremap @@ -1097,6 +1077,16 @@ static void __init setup_vm_final(void) u64 i; /* Setup swapper PGD for fixmap */ +#if !defined(CONFIG_64BIT) + /* + * In 32-bit, the device tree lies in a pgd entry, so it must be copied + * directly in swapper_pg_dir in addition to the pgd entry that points + * to fixmap_pte. + */ + unsigned long idx = pgd_index(__fix_to_virt(FIX_FDT)); + + set_pgd(&swapper_pg_dir[idx], early_pg_dir[idx]); +#endif create_pgd_mapping(swapper_pg_dir, FIXADDR_START, __pa_symbol(fixmap_pgd_next), PGDIR_SIZE, PAGE_TABLE); diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c index ce7dfc81bb3f..77be59aadc73 100644 --- a/arch/riscv/mm/tlbflush.c +++ b/arch/riscv/mm/tlbflush.c @@ -5,17 +5,80 @@ #include <linux/sched.h> #include <asm/sbi.h> #include <asm/mmu_context.h> -#include <asm/tlbflush.h> + +static inline void local_flush_tlb_all_asid(unsigned long asid) +{ + __asm__ __volatile__ ("sfence.vma x0, %0" + : + : "r" (asid) + : "memory"); +} + +static inline void local_flush_tlb_page_asid(unsigned long addr, + unsigned long asid) +{ + __asm__ __volatile__ ("sfence.vma %0, %1" + : + : "r" (addr), "r" (asid) + : "memory"); +} + +static inline void local_flush_tlb_range(unsigned long start, + unsigned long size, unsigned long stride) +{ + if (size <= stride) + local_flush_tlb_page(start); + else + local_flush_tlb_all(); +} + +static inline void local_flush_tlb_range_asid(unsigned long start, + unsigned long size, unsigned long stride, unsigned long asid) +{ + if (size <= stride) + local_flush_tlb_page_asid(start, asid); + else + local_flush_tlb_all_asid(asid); +} + +static void __ipi_flush_tlb_all(void *info) +{ + local_flush_tlb_all(); +} void flush_tlb_all(void) { - sbi_remote_sfence_vma(NULL, 0, -1); + if (riscv_use_ipi_for_rfence()) + on_each_cpu(__ipi_flush_tlb_all, NULL, 1); + else + sbi_remote_sfence_vma(NULL, 0, -1); +} + +struct flush_tlb_range_data { + unsigned long asid; + unsigned long start; + unsigned long size; + unsigned long stride; +}; + +static void __ipi_flush_tlb_range_asid(void *info) +{ + struct flush_tlb_range_data *d = info; + + local_flush_tlb_range_asid(d->start, d->size, d->stride, d->asid); +} + +static void __ipi_flush_tlb_range(void *info) +{ + struct flush_tlb_range_data *d = info; + + local_flush_tlb_range(d->start, d->size, d->stride); } -static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start, - unsigned long size, unsigned long stride) +static void __flush_tlb_range(struct mm_struct *mm, unsigned long start, + unsigned long size, unsigned long stride) { - struct cpumask *pmask = &mm->context.tlb_stale_mask; + struct flush_tlb_range_data ftd; struct cpumask *cmask = mm_cpumask(mm); unsigned int cpuid; bool broadcast; @@ -27,31 +90,37 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start, /* check if the tlbflush needs to be sent to other CPUs */ broadcast = cpumask_any_but(cmask, cpuid) < nr_cpu_ids; if (static_branch_unlikely(&use_asid_allocator)) { - unsigned long asid = atomic_long_read(&mm->context.id); - - /* - * TLB will be immediately flushed on harts concurrently - * executing this MM context. TLB flush on other harts - * is deferred until this MM context migrates there. - */ - cpumask_setall(pmask); - cpumask_clear_cpu(cpuid, pmask); - cpumask_andnot(pmask, pmask, cmask); + unsigned long asid = atomic_long_read(&mm->context.id) & asid_mask; if (broadcast) { - sbi_remote_sfence_vma_asid(cmask, start, size, asid); - } else if (size <= stride) { - local_flush_tlb_page_asid(start, asid); + if (riscv_use_ipi_for_rfence()) { + ftd.asid = asid; + ftd.start = start; + ftd.size = size; + ftd.stride = stride; + on_each_cpu_mask(cmask, + __ipi_flush_tlb_range_asid, + &ftd, 1); + } else + sbi_remote_sfence_vma_asid(cmask, + start, size, asid); } else { - local_flush_tlb_all_asid(asid); + local_flush_tlb_range_asid(start, size, stride, asid); } } else { if (broadcast) { - sbi_remote_sfence_vma(cmask, start, size); - } else if (size <= stride) { - local_flush_tlb_page(start); + if (riscv_use_ipi_for_rfence()) { + ftd.asid = 0; + ftd.start = start; + ftd.size = size; + ftd.stride = stride; + on_each_cpu_mask(cmask, + __ipi_flush_tlb_range, + &ftd, 1); + } else + sbi_remote_sfence_vma(cmask, start, size); } else { - local_flush_tlb_all(); + local_flush_tlb_range(start, size, stride); } } @@ -60,23 +129,23 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start, void flush_tlb_mm(struct mm_struct *mm) { - __sbi_tlb_flush_range(mm, 0, -1, PAGE_SIZE); + __flush_tlb_range(mm, 0, -1, PAGE_SIZE); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) { - __sbi_tlb_flush_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE); + __flush_tlb_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE); } void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - __sbi_tlb_flush_range(vma->vm_mm, start, end - start, PAGE_SIZE); + __flush_tlb_range(vma->vm_mm, start, end - start, PAGE_SIZE); } #ifdef CONFIG_TRANSPARENT_HUGEPAGE void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - __sbi_tlb_flush_range(vma->vm_mm, start, end - start, PMD_SIZE); + __flush_tlb_range(vma->vm_mm, start, end - start, PMD_SIZE); } #endif diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c index f5a668736c79..c648864c8cd1 100644 --- a/arch/riscv/net/bpf_jit_comp64.c +++ b/arch/riscv/net/bpf_jit_comp64.c @@ -10,6 +10,7 @@ #include <linux/filter.h> #include <linux/memory.h> #include <linux/stop_machine.h> +#include <asm/patch.h> #include "bpf_jit.h" #define RV_REG_TCC RV_REG_A6 @@ -1751,3 +1752,8 @@ void bpf_jit_build_epilogue(struct rv_jit_context *ctx) { __build_epilogue(false, ctx); } + +bool bpf_jit_supports_kfunc_call(void) +{ + return true; +} diff --git a/arch/riscv/purgatory/Makefile b/arch/riscv/purgatory/Makefile index d16bf715a586..5730797a6b40 100644 --- a/arch/riscv/purgatory/Makefile +++ b/arch/riscv/purgatory/Makefile @@ -84,12 +84,7 @@ CFLAGS_string.o += $(PURGATORY_CFLAGS) CFLAGS_REMOVE_ctype.o += $(PURGATORY_CFLAGS_REMOVE) CFLAGS_ctype.o += $(PURGATORY_CFLAGS) -AFLAGS_REMOVE_entry.o += -Wa,-gdwarf-2 -AFLAGS_REMOVE_memcpy.o += -Wa,-gdwarf-2 -AFLAGS_REMOVE_memset.o += -Wa,-gdwarf-2 -AFLAGS_REMOVE_strcmp.o += -Wa,-gdwarf-2 -AFLAGS_REMOVE_strlen.o += -Wa,-gdwarf-2 -AFLAGS_REMOVE_strncmp.o += -Wa,-gdwarf-2 +asflags-remove-y += $(foreach x, -g -gdwarf-4 -gdwarf-5, $(x) -Wa,$(x)) $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE $(call if_changed,ld) diff --git a/arch/s390/Makefile b/arch/s390/Makefile index b3235ab0ace8..ed646c583e4f 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -162,7 +162,7 @@ vdso_prepare: prepare0 ifdef CONFIG_EXPOLINE_EXTERN modules_prepare: expoline_prepare -expoline_prepare: +expoline_prepare: scripts $(Q)$(MAKE) $(build)=arch/s390/lib/expoline arch/s390/lib/expoline/expoline.o endif endif diff --git a/arch/s390/boot/ipl_report.c b/arch/s390/boot/ipl_report.c index 9b14045065b6..74b5cd264862 100644 --- a/arch/s390/boot/ipl_report.c +++ b/arch/s390/boot/ipl_report.c @@ -57,11 +57,19 @@ repeat: if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && initrd_data.start && initrd_data.size && intersects(initrd_data.start, initrd_data.size, safe_addr, size)) safe_addr = initrd_data.start + initrd_data.size; + if (intersects(safe_addr, size, (unsigned long)comps, comps->len)) { + safe_addr = (unsigned long)comps + comps->len; + goto repeat; + } for_each_rb_entry(comp, comps) if (intersects(safe_addr, size, comp->addr, comp->len)) { safe_addr = comp->addr + comp->len; goto repeat; } + if (intersects(safe_addr, size, (unsigned long)certs, certs->len)) { + safe_addr = (unsigned long)certs + certs->len; + goto repeat; + } for_each_rb_entry(cert, certs) if (intersects(safe_addr, size, cert->addr, cert->len)) { safe_addr = cert->addr + cert->len; diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig index 3c68fe49042c..4ccf66d29fc2 100644 --- a/arch/s390/configs/debug_defconfig +++ b/arch/s390/configs/debug_defconfig @@ -23,7 +23,6 @@ CONFIG_NUMA_BALANCING=y CONFIG_MEMCG=y CONFIG_BLK_CGROUP=y CONFIG_CFS_BANDWIDTH=y -CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_PIDS=y CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y @@ -90,7 +89,6 @@ CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_IOSCHED_BFQ=y -CONFIG_BFQ_GROUP_IOSCHED=y CONFIG_BINFMT_MISC=m CONFIG_ZSWAP=y CONFIG_ZSMALLOC_STAT=y @@ -298,7 +296,6 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -340,7 +337,6 @@ CONFIG_BRIDGE_MRP=y CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m @@ -351,7 +347,6 @@ CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_DRR=m CONFIG_NET_SCH_MQPRIO=m @@ -363,14 +358,11 @@ CONFIG_NET_SCH_INGRESS=m CONFIG_NET_SCH_PLUG=m CONFIG_NET_SCH_ETS=m CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_FLOW=m CONFIG_NET_CLS_CGROUP=y CONFIG_NET_CLS_BPF=m @@ -584,7 +576,7 @@ CONFIG_DIAG288_WATCHDOG=m CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -# CONFIG_HID is not set +# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_ACCESS=m @@ -828,6 +820,7 @@ CONFIG_PANIC_ON_OOPS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_WQ_WATCHDOG=y CONFIG_TEST_LOCKUP=m +CONFIG_DEBUG_PREEMPT=y CONFIG_PROVE_LOCKING=y CONFIG_LOCK_STAT=y CONFIG_DEBUG_ATOMIC_SLEEP=y @@ -843,6 +836,7 @@ CONFIG_RCU_CPU_STALL_TIMEOUT=300 # CONFIG_RCU_TRACE is not set CONFIG_LATENCYTOP=y CONFIG_BOOTTIME_TRACING=y +CONFIG_FPROBE=y CONFIG_FUNCTION_PROFILER=y CONFIG_STACK_TRACER=y CONFIG_IRQSOFF_TRACER=y @@ -857,6 +851,7 @@ CONFIG_SAMPLES=y CONFIG_SAMPLE_TRACE_PRINTK=m CONFIG_SAMPLE_FTRACE_DIRECT=m CONFIG_SAMPLE_FTRACE_DIRECT_MULTI=m +CONFIG_SAMPLE_FTRACE_OPS=m CONFIG_DEBUG_ENTRY=y CONFIG_CIO_INJECT=y CONFIG_KUNIT=m diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig index 9ab91632f74c..693297a2e897 100644 --- a/arch/s390/configs/defconfig +++ b/arch/s390/configs/defconfig @@ -21,7 +21,6 @@ CONFIG_NUMA_BALANCING=y CONFIG_MEMCG=y CONFIG_BLK_CGROUP=y CONFIG_CFS_BANDWIDTH=y -CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_PIDS=y CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y @@ -85,7 +84,6 @@ CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_IOSCHED_BFQ=y -CONFIG_BFQ_GROUP_IOSCHED=y CONFIG_BINFMT_MISC=m CONFIG_ZSWAP=y CONFIG_ZSMALLOC_STAT=y @@ -289,7 +287,6 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -330,7 +327,6 @@ CONFIG_BRIDGE_MRP=y CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m @@ -341,7 +337,6 @@ CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_DRR=m CONFIG_NET_SCH_MQPRIO=m @@ -353,14 +348,11 @@ CONFIG_NET_SCH_INGRESS=m CONFIG_NET_SCH_PLUG=m CONFIG_NET_SCH_ETS=m CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_FLOW=m CONFIG_NET_CLS_CGROUP=y CONFIG_NET_CLS_BPF=m @@ -573,7 +565,7 @@ CONFIG_DIAG288_WATCHDOG=m CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -# CONFIG_HID is not set +# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_ACCESS=m @@ -795,6 +787,7 @@ CONFIG_RCU_REF_SCALE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=60 CONFIG_LATENCYTOP=y CONFIG_BOOTTIME_TRACING=y +CONFIG_FPROBE=y CONFIG_FUNCTION_PROFILER=y CONFIG_STACK_TRACER=y CONFIG_SCHED_TRACER=y @@ -805,6 +798,7 @@ CONFIG_SAMPLES=y CONFIG_SAMPLE_TRACE_PRINTK=m CONFIG_SAMPLE_FTRACE_DIRECT=m CONFIG_SAMPLE_FTRACE_DIRECT_MULTI=m +CONFIG_SAMPLE_FTRACE_OPS=m CONFIG_KUNIT=m CONFIG_KUNIT_DEBUGFS=y CONFIG_LKDTM=m diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index a9c0c81d1de9..33a232bb68af 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -58,7 +58,7 @@ CONFIG_ZFCP=y # CONFIG_VMCP is not set # CONFIG_MONWRITER is not set # CONFIG_S390_VMUR is not set -# CONFIG_HID is not set +# CONFIG_HID_SUPPORT is not set # CONFIG_VIRTIO_MENU is not set # CONFIG_VHOST_MENU is not set # CONFIG_IOMMU_SUPPORT is not set diff --git a/arch/s390/include/uapi/asm/dasd.h b/arch/s390/include/uapi/asm/dasd.h index 93d1ccd3304c..9c49c3d67cd5 100644 --- a/arch/s390/include/uapi/asm/dasd.h +++ b/arch/s390/include/uapi/asm/dasd.h @@ -78,6 +78,7 @@ typedef struct dasd_information2_t { * 0x040: give access to raw eckd data * 0x080: enable discard support * 0x100: enable autodisable for IFCC errors (default) + * 0x200: enable requeue of all requests on autoquiesce */ #define DASD_FEATURE_READONLY 0x001 #define DASD_FEATURE_USEDIAG 0x002 @@ -88,6 +89,7 @@ typedef struct dasd_information2_t { #define DASD_FEATURE_USERAW 0x040 #define DASD_FEATURE_DISCARD 0x080 #define DASD_FEATURE_PATH_AUTODISABLE 0x100 +#define DASD_FEATURE_REQUEUEQUIESCE 0x200 #define DASD_FEATURE_DEFAULT DASD_FEATURE_PATH_AUTODISABLE #define DASD_PARTN_BITS 2 diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S index 43ff91073d2a..6c10da43b538 100644 --- a/arch/s390/kernel/mcount.S +++ b/arch/s390/kernel/mcount.S @@ -32,6 +32,11 @@ ENTRY(ftrace_stub) BR_EX %r14 ENDPROC(ftrace_stub) +SYM_CODE_START(ftrace_stub_direct_tramp) + lgr %r1, %r0 + BR_EX %r1 +SYM_CODE_END(ftrace_stub_direct_tramp) + .macro ftrace_regs_entry, allregs=0 stg %r14,(__SF_GPRS+8*8)(%r15) # save traced function caller diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index cf9659e13f03..ea244a73efad 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -474,9 +474,7 @@ long arch_ptrace(struct task_struct *child, long request, } return 0; case PTRACE_GET_LAST_BREAK: - put_user(child->thread.last_break, - (unsigned long __user *) data); - return 0; + return put_user(child->thread.last_break, (unsigned long __user *)data); case PTRACE_ENABLE_TE: if (!MACHINE_HAS_TE) return -EIO; @@ -824,9 +822,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, } return 0; case PTRACE_GET_LAST_BREAK: - put_user(child->thread.last_break, - (unsigned int __user *) data); - return 0; + return put_user(child->thread.last_break, (unsigned int __user *)data); } return compat_ptrace_request(child, request, addr, data); } diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile index 245bddfe9bc0..bafd3147eb4e 100644 --- a/arch/s390/kernel/vdso32/Makefile +++ b/arch/s390/kernel/vdso32/Makefile @@ -2,9 +2,8 @@ # List of files in the vdso KCOV_INSTRUMENT := n -ARCH_REL_TYPE_ABS := R_390_COPY|R_390_GLOB_DAT|R_390_JMP_SLOT|R_390_RELATIVE -ARCH_REL_TYPE_ABS += R_390_GOT|R_390_PLT +# Include the generic Makefile to check the built vdso. include $(srctree)/lib/vdso/Makefile obj-vdso32 = vdso_user_wrapper-32.o note-32.o diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile index 34f9542636e9..a766d286e15f 100644 --- a/arch/s390/kernel/vdso64/Makefile +++ b/arch/s390/kernel/vdso64/Makefile @@ -2,9 +2,8 @@ # List of files in the vdso KCOV_INSTRUMENT := n -ARCH_REL_TYPE_ABS := R_390_COPY|R_390_GLOB_DAT|R_390_JMP_SLOT|R_390_RELATIVE -ARCH_REL_TYPE_ABS += R_390_GOT|R_390_PLT +# Include the generic Makefile to check the built vdso. include $(srctree)/lib/vdso/Makefile obj-vdso64 = vdso_user_wrapper.o note.o obj-cvdso64 = vdso64_generic.o getcpu.o diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig index 33f4ff909476..45fdf2a9b2e3 100644 --- a/arch/s390/kvm/Kconfig +++ b/arch/s390/kvm/Kconfig @@ -31,7 +31,6 @@ config KVM select HAVE_KVM_IRQ_ROUTING select HAVE_KVM_INVALID_WAKEUPS select HAVE_KVM_NO_POLL - select SRCU select KVM_VFIO select INTERVAL_TREE select MMU_NOTIFIER diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index 0ee02dae14b2..2cda8d9d7c6e 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -271,10 +271,18 @@ static int handle_prog(struct kvm_vcpu *vcpu) * handle_external_interrupt - used for external interruption interceptions * @vcpu: virtual cpu * - * This interception only occurs if the CPUSTAT_EXT_INT bit was set, or if - * the new PSW does not have external interrupts disabled. In the first case, - * we've got to deliver the interrupt manually, and in the second case, we - * drop to userspace to handle the situation there. + * This interception occurs if: + * - the CPUSTAT_EXT_INT bit was already set when the external interrupt + * occurred. In this case, the interrupt needs to be injected manually to + * preserve interrupt priority. + * - the external new PSW has external interrupts enabled, which will cause an + * interruption loop. We drop to userspace in this case. + * + * The latter case can be detected by inspecting the external mask bit in the + * external new psw. + * + * Under PV, only the latter case can occur, since interrupt priorities are + * handled in the ultravisor. */ static int handle_external_interrupt(struct kvm_vcpu *vcpu) { @@ -285,10 +293,18 @@ static int handle_external_interrupt(struct kvm_vcpu *vcpu) vcpu->stat.exit_external_interrupt++; - rc = read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &newpsw, sizeof(psw_t)); - if (rc) - return rc; - /* We can not handle clock comparator or timer interrupt with bad PSW */ + if (kvm_s390_pv_cpu_is_protected(vcpu)) { + newpsw = vcpu->arch.sie_block->gpsw; + } else { + rc = read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &newpsw, sizeof(psw_t)); + if (rc) + return rc; + } + + /* + * Clock comparator or timer interrupt with external interrupt enabled + * will cause interrupt loop. Drop to userspace. + */ if ((eic == EXT_IRQ_CLK_COMP || eic == EXT_IRQ_CPU_TIMER) && (newpsw.mask & PSW_MASK_EXT)) return -EOPNOTSUPP; diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 39b36562c043..1eeb9ae57879 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -573,6 +573,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_S390_VCPU_RESETS: case KVM_CAP_SET_GUEST_DEBUG: case KVM_CAP_S390_DIAG318: + case KVM_CAP_IRQFD_RESAMPLE: r = 1; break; case KVM_CAP_SET_GUEST_DEBUG2: diff --git a/arch/s390/lib/uaccess.c b/arch/s390/lib/uaccess.c index 720036fb1924..d44214072779 100644 --- a/arch/s390/lib/uaccess.c +++ b/arch/s390/lib/uaccess.c @@ -172,7 +172,7 @@ unsigned long __clear_user(void __user *to, unsigned long size) "4: slgr %0,%0\n" "5:\n" EX_TABLE(0b,2b) EX_TABLE(6b,2b) EX_TABLE(3b,5b) EX_TABLE(7b,5b) - : "+a" (size), "+a" (to), "+a" (tmp1), "=a" (tmp2) + : "+&a" (size), "+&a" (to), "+a" (tmp1), "=&a" (tmp2) : "a" (empty_zero_page), [spec] "d" (spec.val) : "cc", "memory", "0"); return size; diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index d0846ba818ee..f95d7e401b96 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -539,7 +539,7 @@ static void bpf_jit_plt(void *plt, void *ret, void *target) { memcpy(plt, bpf_plt, BPF_PLT_SIZE); *(void **)((char *)plt + (bpf_plt_ret - bpf_plt)) = ret; - *(void **)((char *)plt + (bpf_plt_target - bpf_plt)) = target; + *(void **)((char *)plt + (bpf_plt_target - bpf_plt)) = target ?: ret; } /* @@ -2001,6 +2001,11 @@ bool bpf_jit_supports_kfunc_call(void) return true; } +bool bpf_jit_supports_far_kfunc_call(void) +{ + return true; +} + int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t, void *old_addr, void *new_addr) { @@ -2010,7 +2015,9 @@ int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t, } __packed insn; char expected_plt[BPF_PLT_SIZE]; char current_plt[BPF_PLT_SIZE]; + char new_plt[BPF_PLT_SIZE]; char *plt; + char *ret; int err; /* Verify the branch to be patched. */ @@ -2032,12 +2039,15 @@ int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t, err = copy_from_kernel_nofault(current_plt, plt, BPF_PLT_SIZE); if (err < 0) return err; - bpf_jit_plt(expected_plt, (char *)ip + 6, old_addr); + ret = (char *)ip + 6; + bpf_jit_plt(expected_plt, ret, old_addr); if (memcmp(current_plt, expected_plt, BPF_PLT_SIZE)) return -EINVAL; /* Adjust the call address. */ + bpf_jit_plt(new_plt, ret, new_addr); s390_kernel_write(plt + (bpf_plt_target - bpf_plt), - &new_addr, sizeof(void *)); + new_plt + (bpf_plt_target - bpf_plt), + sizeof(void *)); } /* Adjust the mask of the branch. */ diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index ef38b1514c77..e16afacc8fd1 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -544,8 +544,7 @@ static struct resource *__alloc_res(struct zpci_dev *zdev, unsigned long start, return r; } -int zpci_setup_bus_resources(struct zpci_dev *zdev, - struct list_head *resources) +int zpci_setup_bus_resources(struct zpci_dev *zdev) { unsigned long addr, size, flags; struct resource *res; @@ -581,7 +580,6 @@ int zpci_setup_bus_resources(struct zpci_dev *zdev, return -ENOMEM; } zdev->bars[i].res = res; - pci_add_resource(resources, res); } zdev->has_resources = 1; @@ -590,17 +588,23 @@ int zpci_setup_bus_resources(struct zpci_dev *zdev, static void zpci_cleanup_bus_resources(struct zpci_dev *zdev) { + struct resource *res; int i; + pci_lock_rescan_remove(); for (i = 0; i < PCI_STD_NUM_BARS; i++) { - if (!zdev->bars[i].size || !zdev->bars[i].res) + res = zdev->bars[i].res; + if (!res) continue; + release_resource(res); + pci_bus_remove_resource(zdev->zbus->bus, res); zpci_free_iomap(zdev, zdev->bars[i].map_idx); - release_resource(zdev->bars[i].res); - kfree(zdev->bars[i].res); + zdev->bars[i].res = NULL; + kfree(res); } zdev->has_resources = 0; + pci_unlock_rescan_remove(); } int pcibios_device_add(struct pci_dev *pdev) diff --git a/arch/s390/pci/pci_bus.c b/arch/s390/pci/pci_bus.c index 6a8da1b742ae..a99926af2b69 100644 --- a/arch/s390/pci/pci_bus.c +++ b/arch/s390/pci/pci_bus.c @@ -41,9 +41,7 @@ static int zpci_nb_devices; */ static int zpci_bus_prepare_device(struct zpci_dev *zdev) { - struct resource_entry *window, *n; - struct resource *res; - int rc; + int rc, i; if (!zdev_enabled(zdev)) { rc = zpci_enable_device(zdev); @@ -57,10 +55,10 @@ static int zpci_bus_prepare_device(struct zpci_dev *zdev) } if (!zdev->has_resources) { - zpci_setup_bus_resources(zdev, &zdev->zbus->resources); - resource_list_for_each_entry_safe(window, n, &zdev->zbus->resources) { - res = window->res; - pci_bus_add_resource(zdev->zbus->bus, res, 0); + zpci_setup_bus_resources(zdev); + for (i = 0; i < PCI_STD_NUM_BARS; i++) { + if (zdev->bars[i].res) + pci_bus_add_resource(zdev->zbus->bus, zdev->bars[i].res, 0); } } diff --git a/arch/s390/pci/pci_bus.h b/arch/s390/pci/pci_bus.h index e96c9860e064..af9f0ac79a1b 100644 --- a/arch/s390/pci/pci_bus.h +++ b/arch/s390/pci/pci_bus.h @@ -30,8 +30,7 @@ static inline void zpci_zdev_get(struct zpci_dev *zdev) int zpci_alloc_domain(int domain); void zpci_free_domain(int domain); -int zpci_setup_bus_resources(struct zpci_dev *zdev, - struct list_head *resources); +int zpci_setup_bus_resources(struct zpci_dev *zdev); static inline struct zpci_dev *zdev_from_bus(struct pci_bus *bus, unsigned int devfn) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0665ac0add0b..d49a5a7aa10d 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -4,7 +4,6 @@ config SUPERH select ARCH_32BIT_OFF_T select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM && MMU select ARCH_ENABLE_MEMORY_HOTREMOVE if SPARSEMEM && MMU - select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A) select ARCH_HAS_BINFMT_FLAT if !MMU select ARCH_HAS_CURRENT_STACK_POINTER @@ -25,6 +24,7 @@ config SUPERH select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD select GUP_GET_PXX_LOW_HIGH if X2TLB + select HAS_IOPORT if HAS_IOPORT_MAP select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP_FILTER diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu index fff419f3d757..336c54369636 100644 --- a/arch/sh/Kconfig.cpu +++ b/arch/sh/Kconfig.cpu @@ -85,7 +85,7 @@ config CPU_HAS_SR_RB that are lacking this bit must have another method in place for accomplishing what is taken care of by the banked registers. - See <file:Documentation/sh/register-banks.rst> for further + See <file:Documentation/arch/sh/register-banks.rst> for further information on SR.RB and register banking in the kernel in general. config CPU_HAS_PTEAEX diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 56bd386ff3b0..75de893152af 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -21,6 +21,7 @@ #include <linux/sh_intc.h> #include <mach/magicpanelr2.h> #include <asm/heartbeat.h> +#include <cpu/gpio.h> #include <cpu/sh7720.h> /* Dummy supplies, where voltage doesn't matter */ diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index c77b5f00a66a..151792162152 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -18,6 +18,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/gpio/machine.h> #include <linux/i2c.h> #include <linux/init.h> @@ -411,16 +412,16 @@ static int __init ap325rxa_devices_setup(void) /* LD3 and LD4 LEDs */ gpio_request(GPIO_PTX5, NULL); /* RUN */ gpio_direction_output(GPIO_PTX5, 1); - gpio_export(GPIO_PTX5, 0); + gpiod_export(gpio_to_desc(GPIO_PTX5), 0); gpio_request(GPIO_PTX4, NULL); /* INDICATOR */ gpio_direction_output(GPIO_PTX4, 0); - gpio_export(GPIO_PTX4, 0); + gpiod_export(gpio_to_desc(GPIO_PTX4), 0); /* SW1 input */ gpio_request(GPIO_PTF7, NULL); /* MODE */ gpio_direction_input(GPIO_PTF7); - gpio_export(GPIO_PTF7, 0); + gpiod_export(gpio_to_desc(GPIO_PTF7), 0); /* LCDC */ gpio_request(GPIO_FN_LCDD15, NULL); diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index 95b85f2e13dd..ca2802d30565 100644 --- a/arch/sh/boards/mach-x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c @@ -16,7 +16,7 @@ #include <linux/input.h> #include <linux/usb/r8a66597.h> #include <linux/usb/m66592.h> -#include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <linux/gpio_keys.h> #include <mach/ilsel.h> #include <mach/hardware.h> diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h deleted file mode 100644 index 588c1380e4cb..000000000000 --- a/arch/sh/include/asm/gpio.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * include/asm-sh/gpio.h - * - * Generic GPIO API and pinmux table support for SuperH. - * - * Copyright (c) 2008 Magnus Damm - */ -#ifndef __ASM_SH_GPIO_H -#define __ASM_SH_GPIO_H - -#include <linux/kernel.h> -#include <linux/errno.h> - -#if defined(CONFIG_CPU_SH3) -#include <cpu/gpio.h> -#endif - -#include <asm-generic/gpio.h> - -#ifdef CONFIG_GPIOLIB - -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - -#endif /* CONFIG_GPIOLIB */ - -#endif /* __ASM_SH_GPIO_H */ diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h index 27aebf1e75a2..3ef7adf739c8 100644 --- a/arch/sh/include/asm/processor_32.h +++ b/arch/sh/include/asm/processor_32.h @@ -50,6 +50,7 @@ #define SR_FD 0x00008000 #define SR_MD 0x40000000 +#define SR_USER_MASK 0x00000303 // M, Q, S, T bits /* * DSP structure and data */ diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index 90f495d35db2..a6bfc6f37491 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -115,6 +115,7 @@ static int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p) { unsigned int err = 0; + unsigned int sr = regs->sr & ~SR_USER_MASK; #define COPY(x) err |= __get_user(regs->x, &sc->sc_##x) COPY(regs[1]); @@ -130,6 +131,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p COPY(sr); COPY(pc); #undef COPY + regs->sr = (regs->sr & SR_USER_MASK) | sr; + #ifdef CONFIG_SH_FPU if (boot_cpu_data.flags & CPU_HAS_FPU) { int owned_fp; diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 84437a4c6545..d4c1d96f85cd 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -32,6 +32,7 @@ config SPARC select GENERIC_IRQ_SHOW select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_PCI_IOMAP + select HAS_IOPORT select HAVE_NMI_WATCHDOG if SPARC64 select HAVE_CBPF_JIT if SPARC32 select HAVE_EBPF_JIT if SPARC64 diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h index 587edb8b5a65..8184575b1336 100644 --- a/arch/sparc/include/asm/prom.h +++ b/arch/sparc/include/asm/prom.h @@ -19,11 +19,14 @@ #include <linux/mutex.h> #include <linux/atomic.h> #include <linux/irqdomain.h> +#include <linux/spinlock.h> #define of_compat_cmp(s1, s2, l) strncmp((s1), (s2), (l)) #define of_prop_cmp(s1, s2) strcasecmp((s1), (s2)) #define of_node_cmp(s1, s2) strcmp((s1), (s2)) +extern raw_spinlock_t devtree_lock; + struct of_irq_controller { unsigned int (*irq_build)(struct device_node *, unsigned int, void *); void *data; diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c index 4ebf51e6e78e..b60f58e04164 100644 --- a/arch/sparc/kernel/of_device_32.c +++ b/arch/sparc/kernel/of_device_32.c @@ -29,7 +29,7 @@ static int of_bus_pci_match(struct device_node *np) * parent as-is, not with the PCI translate * method which chops off the top address cell. */ - if (!of_find_property(np, "ranges", NULL)) + if (!of_property_present(np, "ranges")) return 0; return 1; @@ -223,7 +223,7 @@ static int __init build_one_resource(struct device_node *parent, static int __init use_1to1_mapping(struct device_node *pp) { /* If we have a ranges property in the parent, use it. */ - if (of_find_property(pp, "ranges", NULL) != NULL) + if (of_property_present(pp, "ranges")) return 0; /* Some SBUS devices use intermediate nodes to express diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index 5a9f86b1d4e7..5b5143e17ba3 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -58,7 +58,7 @@ static int of_bus_pci_match(struct device_node *np) * parent as-is, not with the PCI translate * method which chops off the top address cell. */ - if (!of_find_property(np, "ranges", NULL)) + if (!of_property_present(np, "ranges")) return 0; return 1; @@ -78,7 +78,7 @@ static int of_bus_simba_match(struct device_node *np) * simba. */ if (of_node_name_eq(np, "pci")) { - if (!of_find_property(np, "ranges", NULL)) + if (!of_property_present(np, "ranges")) return 1; } @@ -283,7 +283,7 @@ static int __init build_one_resource(struct device_node *parent, static int __init use_1to1_mapping(struct device_node *pp) { /* If we have a ranges property in the parent, use it. */ - if (of_find_property(pp, "ranges", NULL) != NULL) + if (of_property_present(pp, "ranges")) return 0; /* If the parent is the dma node of an ISA bus, pass diff --git a/arch/sparc/kernel/of_device_common.c b/arch/sparc/kernel/of_device_common.c index e717a56efc5d..60f86b837658 100644 --- a/arch/sparc/kernel/of_device_common.c +++ b/arch/sparc/kernel/of_device_common.c @@ -162,7 +162,7 @@ int of_bus_sbus_match(struct device_node *np) * don't have some intervening real bus that provides * ranges based translations. */ - if (of_find_property(dp, "ranges", NULL) != NULL) + if (of_property_present(dp, "ranges")) break; dp = dp->parent; diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c index 421aba00e6b0..23b47f7fdb1d 100644 --- a/arch/sparc/kernel/pci_schizo.c +++ b/arch/sparc/kernel/pci_schizo.c @@ -1270,7 +1270,7 @@ static void schizo_pbm_hw_init(struct pci_pbm_info *pbm) pbm->chip_version >= 0x2) tmp |= 0x3UL << SCHIZO_PCICTRL_PTO_SHIFT; - if (!of_find_property(pbm->op->dev.of_node, "no-bus-parking", NULL)) + if (!of_property_read_bool(pbm->op->dev.of_node, "no-bus-parking")) tmp |= SCHIZO_PCICTRL_PARK; else tmp &= ~SCHIZO_PCICTRL_PARK; diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c index d941875dd718..8147985a1dc4 100644 --- a/arch/sparc/kernel/power.c +++ b/arch/sparc/kernel/power.c @@ -28,7 +28,7 @@ static int has_button_interrupt(unsigned int irq, struct device_node *dp) { if (irq == 0xffffffff) return 0; - if (!of_find_property(dp, "button", NULL)) + if (!of_property_read_bool(dp, "button")) return 0; return 1; diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c index f883a50fa333..998aa693d491 100644 --- a/arch/sparc/kernel/prom_64.c +++ b/arch/sparc/kernel/prom_64.c @@ -502,7 +502,7 @@ static void *fill_in_one_cpu(struct device_node *dp, int cpuid, int arg) struct device_node *portid_parent = NULL; int portid = -1; - if (of_find_property(dp, "cpuid", NULL)) { + if (of_property_present(dp, "cpuid")) { int limit = 2; portid_parent = dp; diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c index 8a08830e4a65..958c2cf4479b 100644 --- a/arch/sparc/kernel/time_32.c +++ b/arch/sparc/kernel/time_32.c @@ -277,7 +277,7 @@ static int clock_probe(struct platform_device *op) return -ENODEV; /* Only the primary RTC has an address property */ - if (!of_find_property(dp, "address", NULL)) + if (!of_property_present(dp, "address")) return -ENODEV; m48t59_rtc.resource = &op->resource[0]; diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a825bf031f49..442eccc00960 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -162,6 +162,7 @@ config X86 select GUP_GET_PXX_LOW_HIGH if X86_PAE select HARDIRQS_SW_RESEND select HARDLOCKUP_CHECK_TIMESTAMP if X86_64 + select HAS_IOPORT select HAVE_ACPI_APEI if ACPI select HAVE_ACPI_APEI_NMI if ACPI select HAVE_ALIGNED_STRUCT_PAGE if SLUB @@ -283,7 +284,6 @@ config X86 select RTC_LIB select RTC_MC146818_LIB select SPARSE_IRQ - select SRCU select SYSCTL_EXCEPTION_TRACE select THREAD_INFO_IN_TASK select TRACE_IRQFLAGS_SUPPORT @@ -434,7 +434,7 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also <file:Documentation/x86/i386/IO-APIC.rst>, + See also <file:Documentation/arch/x86/i386/IO-APIC.rst>, <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>. @@ -1324,7 +1324,7 @@ config MICROCODE the Linux kernel. The preferred method to load microcode from a detached initrd is described - in Documentation/x86/microcode.rst. For that you need to enable + in Documentation/arch/x86/microcode.rst. For that you need to enable CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan the initrd for microcode blobs. @@ -1510,7 +1510,7 @@ config X86_5LEVEL A kernel with the option enabled can be booted on machines that support 4- or 5-level paging. - See Documentation/x86/x86_64/5level-paging.rst for more + See Documentation/arch/x86/x86_64/5level-paging.rst for more information. Say N if unsure. @@ -1774,7 +1774,7 @@ config MTRR You can safely say Y even if your machine doesn't have MTRRs, you'll just add about 9 KB to your kernel. - See <file:Documentation/x86/mtrr.rst> for more information. + See <file:Documentation/arch/x86/mtrr.rst> for more information. config MTRR_SANITIZER def_bool y @@ -1938,7 +1938,6 @@ config X86_SGX depends on X86_64 && CPU_SUP_INTEL && X86_X2APIC depends on CRYPTO=y depends on CRYPTO_SHA256=y - select SRCU select MMU_NOTIFIER select NUMA_KEEP_MEMINFO if NUMA select XARRAY_MULTI @@ -2551,7 +2550,7 @@ config PAGE_TABLE_ISOLATION ensuring that the majority of kernel addresses are not mapped into userspace. - See Documentation/x86/pti.rst for more details. + See Documentation/arch/x86/pti.rst for more details. config RETPOLINE bool "Avoid speculative indirect branches in kernel" diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index bdfe08f1a930..c5d614d28a75 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -97,7 +97,7 @@ config IOMMU_DEBUG code. When you use it make sure you have a big enough IOMMU/AGP aperture. Most of the options enabled by this can be set more finegrained using the iommu= command line - options. See Documentation/x86/x86_64/boot-options.rst for more + options. See Documentation/arch/x86/x86_64/boot-options.rst for more details. config IOMMU_LEAK diff --git a/arch/x86/Makefile.um b/arch/x86/Makefile.um index b70559b821df..2106a2bd152b 100644 --- a/arch/x86/Makefile.um +++ b/arch/x86/Makefile.um @@ -3,9 +3,14 @@ core-y += arch/x86/crypto/ # # Disable SSE and other FP/SIMD instructions to match normal x86 +# This is required to work around issues in older LLVM versions, but breaks +# GCC versions < 11. See: +# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99652 # +ifeq ($(CONFIG_CC_IS_CLANG),y) KBUILD_CFLAGS += -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx KBUILD_RUSTFLAGS += -Ctarget-feature=-sse,-sse2,-sse3,-ssse3,-sse4.1,-sse4.2,-avx,-avx2 +endif ifeq ($(CONFIG_X86_32),y) START := 0x8048000 diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 9338c68e7413..b04ca8e2b213 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -321,7 +321,7 @@ start_sys_seg: .word SYSSEG # obsolete and meaningless, but just type_of_loader: .byte 0 # 0 means ancient bootloader, newer # bootloaders know to change this. - # See Documentation/x86/boot.rst for + # See Documentation/arch/x86/boot.rst for # assigned ids # flags, unused bits must be zero (RFU) bit within loadflags diff --git a/arch/x86/coco/core.c b/arch/x86/coco/core.c index 49b44f881484..73f83233d25d 100644 --- a/arch/x86/coco/core.c +++ b/arch/x86/coco/core.c @@ -13,7 +13,7 @@ #include <asm/coco.h> #include <asm/processor.h> -static enum cc_vendor vendor __ro_after_init; +enum cc_vendor cc_vendor __ro_after_init; static u64 cc_mask __ro_after_init; static bool intel_cc_platform_has(enum cc_attr attr) @@ -30,6 +30,22 @@ static bool intel_cc_platform_has(enum cc_attr attr) } /* + * Handle the SEV-SNP vTOM case where sme_me_mask is zero, and + * the other levels of SME/SEV functionality, including C-bit + * based SEV-SNP, are not enabled. + */ +static __maybe_unused bool amd_cc_platform_vtom(enum cc_attr attr) +{ + switch (attr) { + case CC_ATTR_GUEST_MEM_ENCRYPT: + case CC_ATTR_MEM_ENCRYPT: + return true; + default: + return false; + } +} + +/* * SME and SEV are very similar but they are not the same, so there are * times that the kernel will need to distinguish between SME and SEV. The * cc_platform_has() function is used for this. When a distinction isn't @@ -41,9 +57,14 @@ static bool intel_cc_platform_has(enum cc_attr attr) * up under SME the trampoline area cannot be encrypted, whereas under SEV * the trampoline area must be encrypted. */ + static bool amd_cc_platform_has(enum cc_attr attr) { #ifdef CONFIG_AMD_MEM_ENCRYPT + + if (sev_status & MSR_AMD64_SNP_VTOM) + return amd_cc_platform_vtom(attr); + switch (attr) { case CC_ATTR_MEM_ENCRYPT: return sme_me_mask; @@ -76,20 +97,13 @@ static bool amd_cc_platform_has(enum cc_attr attr) #endif } -static bool hyperv_cc_platform_has(enum cc_attr attr) -{ - return attr == CC_ATTR_GUEST_MEM_ENCRYPT; -} - bool cc_platform_has(enum cc_attr attr) { - switch (vendor) { + switch (cc_vendor) { case CC_VENDOR_AMD: return amd_cc_platform_has(attr); case CC_VENDOR_INTEL: return intel_cc_platform_has(attr); - case CC_VENDOR_HYPERV: - return hyperv_cc_platform_has(attr); default: return false; } @@ -103,11 +117,14 @@ u64 cc_mkenc(u64 val) * encryption status of the page. * * - for AMD, bit *set* means the page is encrypted - * - for Intel *clear* means encrypted. + * - for AMD with vTOM and for Intel, *clear* means encrypted */ - switch (vendor) { + switch (cc_vendor) { case CC_VENDOR_AMD: - return val | cc_mask; + if (sev_status & MSR_AMD64_SNP_VTOM) + return val & ~cc_mask; + else + return val | cc_mask; case CC_VENDOR_INTEL: return val & ~cc_mask; default: @@ -118,9 +135,12 @@ u64 cc_mkenc(u64 val) u64 cc_mkdec(u64 val) { /* See comment in cc_mkenc() */ - switch (vendor) { + switch (cc_vendor) { case CC_VENDOR_AMD: - return val & ~cc_mask; + if (sev_status & MSR_AMD64_SNP_VTOM) + return val | cc_mask; + else + return val & ~cc_mask; case CC_VENDOR_INTEL: return val | cc_mask; default: @@ -129,11 +149,6 @@ u64 cc_mkdec(u64 val) } EXPORT_SYMBOL_GPL(cc_mkdec); -__init void cc_set_vendor(enum cc_vendor v) -{ - vendor = v; -} - __init void cc_set_mask(u64 mask) { cc_mask = mask; diff --git a/arch/x86/crypto/aegis128-aesni-asm.S b/arch/x86/crypto/aegis128-aesni-asm.S index cdf3215ec272..ad7f4c891625 100644 --- a/arch/x86/crypto/aegis128-aesni-asm.S +++ b/arch/x86/crypto/aegis128-aesni-asm.S @@ -201,8 +201,8 @@ SYM_FUNC_START(crypto_aegis128_aesni_init) movdqa KEY, STATE4 /* load the constants: */ - movdqa .Laegis128_const_0, STATE2 - movdqa .Laegis128_const_1, STATE1 + movdqa .Laegis128_const_0(%rip), STATE2 + movdqa .Laegis128_const_1(%rip), STATE1 pxor STATE2, STATE3 pxor STATE1, STATE4 @@ -682,7 +682,7 @@ SYM_TYPED_FUNC_START(crypto_aegis128_aesni_dec_tail) punpcklbw T0, T0 punpcklbw T0, T0 punpcklbw T0, T0 - movdqa .Laegis128_counter, T1 + movdqa .Laegis128_counter(%rip), T1 pcmpgtb T1, T0 pand T0, MSG diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S index 837c1e0aa021..3ac7487ecad2 100644 --- a/arch/x86/crypto/aesni-intel_asm.S +++ b/arch/x86/crypto/aesni-intel_asm.S @@ -288,53 +288,53 @@ ALL_F: .octa 0xffffffffffffffffffffffffffffffff # Encrypt/Decrypt first few blocks and $(3<<4), %r12 - jz _initial_num_blocks_is_0_\@ + jz .L_initial_num_blocks_is_0_\@ cmp $(2<<4), %r12 - jb _initial_num_blocks_is_1_\@ - je _initial_num_blocks_is_2_\@ -_initial_num_blocks_is_3_\@: + jb .L_initial_num_blocks_is_1_\@ + je .L_initial_num_blocks_is_2_\@ +.L_initial_num_blocks_is_3_\@: INITIAL_BLOCKS_ENC_DEC %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, \ %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 5, 678, \operation sub $48, %r13 - jmp _initial_blocks_\@ -_initial_num_blocks_is_2_\@: + jmp .L_initial_blocks_\@ +.L_initial_num_blocks_is_2_\@: INITIAL_BLOCKS_ENC_DEC %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, \ %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 6, 78, \operation sub $32, %r13 - jmp _initial_blocks_\@ -_initial_num_blocks_is_1_\@: + jmp .L_initial_blocks_\@ +.L_initial_num_blocks_is_1_\@: INITIAL_BLOCKS_ENC_DEC %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, \ %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 7, 8, \operation sub $16, %r13 - jmp _initial_blocks_\@ -_initial_num_blocks_is_0_\@: + jmp .L_initial_blocks_\@ +.L_initial_num_blocks_is_0_\@: INITIAL_BLOCKS_ENC_DEC %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, \ %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 8, 0, \operation -_initial_blocks_\@: +.L_initial_blocks_\@: # Main loop - Encrypt/Decrypt remaining blocks test %r13, %r13 - je _zero_cipher_left_\@ + je .L_zero_cipher_left_\@ sub $64, %r13 - je _four_cipher_left_\@ -_crypt_by_4_\@: + je .L_four_cipher_left_\@ +.L_crypt_by_4_\@: GHASH_4_ENCRYPT_4_PARALLEL_\operation %xmm9, %xmm10, %xmm11, %xmm12, \ %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, \ %xmm7, %xmm8, enc add $64, %r11 sub $64, %r13 - jne _crypt_by_4_\@ -_four_cipher_left_\@: + jne .L_crypt_by_4_\@ +.L_four_cipher_left_\@: GHASH_LAST_4 %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, \ %xmm15, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8 -_zero_cipher_left_\@: +.L_zero_cipher_left_\@: movdqu %xmm8, AadHash(%arg2) movdqu %xmm0, CurCount(%arg2) mov %arg5, %r13 and $15, %r13 # %r13 = arg5 (mod 16) - je _multiple_of_16_bytes_\@ + je .L_multiple_of_16_bytes_\@ mov %r13, PBlockLen(%arg2) @@ -348,14 +348,14 @@ _zero_cipher_left_\@: movdqu %xmm0, PBlockEncKey(%arg2) cmp $16, %arg5 - jge _large_enough_update_\@ + jge .L_large_enough_update_\@ lea (%arg4,%r11,1), %r10 mov %r13, %r12 READ_PARTIAL_BLOCK %r10 %r12 %xmm2 %xmm1 - jmp _data_read_\@ + jmp .L_data_read_\@ -_large_enough_update_\@: +.L_large_enough_update_\@: sub $16, %r11 add %r13, %r11 @@ -374,7 +374,7 @@ _large_enough_update_\@: # shift right 16-r13 bytes pshufb %xmm2, %xmm1 -_data_read_\@: +.L_data_read_\@: lea ALL_F+16(%rip), %r12 sub %r13, %r12 @@ -409,19 +409,19 @@ _data_read_\@: # Output %r13 bytes movq %xmm0, %rax cmp $8, %r13 - jle _less_than_8_bytes_left_\@ + jle .L_less_than_8_bytes_left_\@ mov %rax, (%arg3 , %r11, 1) add $8, %r11 psrldq $8, %xmm0 movq %xmm0, %rax sub $8, %r13 -_less_than_8_bytes_left_\@: +.L_less_than_8_bytes_left_\@: mov %al, (%arg3, %r11, 1) add $1, %r11 shr $8, %rax sub $1, %r13 - jne _less_than_8_bytes_left_\@ -_multiple_of_16_bytes_\@: + jne .L_less_than_8_bytes_left_\@ +.L_multiple_of_16_bytes_\@: .endm # GCM_COMPLETE Finishes update of tag of last partial block @@ -434,11 +434,11 @@ _multiple_of_16_bytes_\@: mov PBlockLen(%arg2), %r12 test %r12, %r12 - je _partial_done\@ + je .L_partial_done\@ GHASH_MUL %xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6 -_partial_done\@: +.L_partial_done\@: mov AadLen(%arg2), %r12 # %r13 = aadLen (number of bytes) shl $3, %r12 # convert into number of bits movd %r12d, %xmm15 # len(A) in %xmm15 @@ -457,44 +457,44 @@ _partial_done\@: movdqu OrigIV(%arg2), %xmm0 # %xmm0 = Y0 ENCRYPT_SINGLE_BLOCK %xmm0, %xmm1 # E(K, Y0) pxor %xmm8, %xmm0 -_return_T_\@: +.L_return_T_\@: mov \AUTHTAG, %r10 # %r10 = authTag mov \AUTHTAGLEN, %r11 # %r11 = auth_tag_len cmp $16, %r11 - je _T_16_\@ + je .L_T_16_\@ cmp $8, %r11 - jl _T_4_\@ -_T_8_\@: + jl .L_T_4_\@ +.L_T_8_\@: movq %xmm0, %rax mov %rax, (%r10) add $8, %r10 sub $8, %r11 psrldq $8, %xmm0 test %r11, %r11 - je _return_T_done_\@ -_T_4_\@: + je .L_return_T_done_\@ +.L_T_4_\@: movd %xmm0, %eax mov %eax, (%r10) add $4, %r10 sub $4, %r11 psrldq $4, %xmm0 test %r11, %r11 - je _return_T_done_\@ -_T_123_\@: + je .L_return_T_done_\@ +.L_T_123_\@: movd %xmm0, %eax cmp $2, %r11 - jl _T_1_\@ + jl .L_T_1_\@ mov %ax, (%r10) cmp $2, %r11 - je _return_T_done_\@ + je .L_return_T_done_\@ add $2, %r10 sar $16, %eax -_T_1_\@: +.L_T_1_\@: mov %al, (%r10) - jmp _return_T_done_\@ -_T_16_\@: + jmp .L_return_T_done_\@ +.L_T_16_\@: movdqu %xmm0, (%r10) -_return_T_done_\@: +.L_return_T_done_\@: .endm #ifdef __x86_64__ @@ -563,30 +563,30 @@ _return_T_done_\@: # Clobbers %rax, DLEN and XMM1 .macro READ_PARTIAL_BLOCK DPTR DLEN XMM1 XMMDst cmp $8, \DLEN - jl _read_lt8_\@ + jl .L_read_lt8_\@ mov (\DPTR), %rax movq %rax, \XMMDst sub $8, \DLEN - jz _done_read_partial_block_\@ + jz .L_done_read_partial_block_\@ xor %eax, %eax -_read_next_byte_\@: +.L_read_next_byte_\@: shl $8, %rax mov 7(\DPTR, \DLEN, 1), %al dec \DLEN - jnz _read_next_byte_\@ + jnz .L_read_next_byte_\@ movq %rax, \XMM1 pslldq $8, \XMM1 por \XMM1, \XMMDst - jmp _done_read_partial_block_\@ -_read_lt8_\@: + jmp .L_done_read_partial_block_\@ +.L_read_lt8_\@: xor %eax, %eax -_read_next_byte_lt8_\@: +.L_read_next_byte_lt8_\@: shl $8, %rax mov -1(\DPTR, \DLEN, 1), %al dec \DLEN - jnz _read_next_byte_lt8_\@ + jnz .L_read_next_byte_lt8_\@ movq %rax, \XMMDst -_done_read_partial_block_\@: +.L_done_read_partial_block_\@: .endm # CALC_AAD_HASH: Calculates the hash of the data which will not be encrypted. @@ -600,8 +600,8 @@ _done_read_partial_block_\@: pxor \TMP6, \TMP6 cmp $16, %r11 - jl _get_AAD_rest\@ -_get_AAD_blocks\@: + jl .L_get_AAD_rest\@ +.L_get_AAD_blocks\@: movdqu (%r10), \TMP7 pshufb %xmm14, \TMP7 # byte-reflect the AAD data pxor \TMP7, \TMP6 @@ -609,14 +609,14 @@ _get_AAD_blocks\@: add $16, %r10 sub $16, %r11 cmp $16, %r11 - jge _get_AAD_blocks\@ + jge .L_get_AAD_blocks\@ movdqu \TMP6, \TMP7 /* read the last <16B of AAD */ -_get_AAD_rest\@: +.L_get_AAD_rest\@: test %r11, %r11 - je _get_AAD_done\@ + je .L_get_AAD_done\@ READ_PARTIAL_BLOCK %r10, %r11, \TMP1, \TMP7 pshufb %xmm14, \TMP7 # byte-reflect the AAD data @@ -624,7 +624,7 @@ _get_AAD_rest\@: GHASH_MUL \TMP7, \HASHKEY, \TMP1, \TMP2, \TMP3, \TMP4, \TMP5 movdqu \TMP7, \TMP6 -_get_AAD_done\@: +.L_get_AAD_done\@: movdqu \TMP6, AadHash(%arg2) .endm @@ -637,21 +637,21 @@ _get_AAD_done\@: AAD_HASH operation mov PBlockLen(%arg2), %r13 test %r13, %r13 - je _partial_block_done_\@ # Leave Macro if no partial blocks + je .L_partial_block_done_\@ # Leave Macro if no partial blocks # Read in input data without over reading cmp $16, \PLAIN_CYPH_LEN - jl _fewer_than_16_bytes_\@ + jl .L_fewer_than_16_bytes_\@ movups (\PLAIN_CYPH_IN), %xmm1 # If more than 16 bytes, just fill xmm - jmp _data_read_\@ + jmp .L_data_read_\@ -_fewer_than_16_bytes_\@: +.L_fewer_than_16_bytes_\@: lea (\PLAIN_CYPH_IN, \DATA_OFFSET, 1), %r10 mov \PLAIN_CYPH_LEN, %r12 READ_PARTIAL_BLOCK %r10 %r12 %xmm0 %xmm1 mov PBlockLen(%arg2), %r13 -_data_read_\@: # Finished reading in data +.L_data_read_\@: # Finished reading in data movdqu PBlockEncKey(%arg2), %xmm9 movdqu HashKey(%arg2), %xmm13 @@ -674,9 +674,9 @@ _data_read_\@: # Finished reading in data sub $16, %r10 # Determine if if partial block is not being filled and # shift mask accordingly - jge _no_extra_mask_1_\@ + jge .L_no_extra_mask_1_\@ sub %r10, %r12 -_no_extra_mask_1_\@: +.L_no_extra_mask_1_\@: movdqu ALL_F-SHIFT_MASK(%r12), %xmm1 # get the appropriate mask to mask out bottom r13 bytes of xmm9 @@ -689,17 +689,17 @@ _no_extra_mask_1_\@: pxor %xmm3, \AAD_HASH test %r10, %r10 - jl _partial_incomplete_1_\@ + jl .L_partial_incomplete_1_\@ # GHASH computation for the last <16 Byte block GHASH_MUL \AAD_HASH, %xmm13, %xmm0, %xmm10, %xmm11, %xmm5, %xmm6 xor %eax, %eax mov %rax, PBlockLen(%arg2) - jmp _dec_done_\@ -_partial_incomplete_1_\@: + jmp .L_dec_done_\@ +.L_partial_incomplete_1_\@: add \PLAIN_CYPH_LEN, PBlockLen(%arg2) -_dec_done_\@: +.L_dec_done_\@: movdqu \AAD_HASH, AadHash(%arg2) .else pxor %xmm1, %xmm9 # Plaintext XOR E(K, Yn) @@ -710,9 +710,9 @@ _dec_done_\@: sub $16, %r10 # Determine if if partial block is not being filled and # shift mask accordingly - jge _no_extra_mask_2_\@ + jge .L_no_extra_mask_2_\@ sub %r10, %r12 -_no_extra_mask_2_\@: +.L_no_extra_mask_2_\@: movdqu ALL_F-SHIFT_MASK(%r12), %xmm1 # get the appropriate mask to mask out bottom r13 bytes of xmm9 @@ -724,17 +724,17 @@ _no_extra_mask_2_\@: pxor %xmm9, \AAD_HASH test %r10, %r10 - jl _partial_incomplete_2_\@ + jl .L_partial_incomplete_2_\@ # GHASH computation for the last <16 Byte block GHASH_MUL \AAD_HASH, %xmm13, %xmm0, %xmm10, %xmm11, %xmm5, %xmm6 xor %eax, %eax mov %rax, PBlockLen(%arg2) - jmp _encode_done_\@ -_partial_incomplete_2_\@: + jmp .L_encode_done_\@ +.L_partial_incomplete_2_\@: add \PLAIN_CYPH_LEN, PBlockLen(%arg2) -_encode_done_\@: +.L_encode_done_\@: movdqu \AAD_HASH, AadHash(%arg2) movdqa SHUF_MASK(%rip), %xmm10 @@ -744,32 +744,32 @@ _encode_done_\@: .endif # output encrypted Bytes test %r10, %r10 - jl _partial_fill_\@ + jl .L_partial_fill_\@ mov %r13, %r12 mov $16, %r13 # Set r13 to be the number of bytes to write out sub %r12, %r13 - jmp _count_set_\@ -_partial_fill_\@: + jmp .L_count_set_\@ +.L_partial_fill_\@: mov \PLAIN_CYPH_LEN, %r13 -_count_set_\@: +.L_count_set_\@: movdqa %xmm9, %xmm0 movq %xmm0, %rax cmp $8, %r13 - jle _less_than_8_bytes_left_\@ + jle .L_less_than_8_bytes_left_\@ mov %rax, (\CYPH_PLAIN_OUT, \DATA_OFFSET, 1) add $8, \DATA_OFFSET psrldq $8, %xmm0 movq %xmm0, %rax sub $8, %r13 -_less_than_8_bytes_left_\@: +.L_less_than_8_bytes_left_\@: movb %al, (\CYPH_PLAIN_OUT, \DATA_OFFSET, 1) add $1, \DATA_OFFSET shr $8, %rax sub $1, %r13 - jne _less_than_8_bytes_left_\@ -_partial_block_done_\@: + jne .L_less_than_8_bytes_left_\@ +.L_partial_block_done_\@: .endm # PARTIAL_BLOCK /* @@ -813,14 +813,14 @@ _partial_block_done_\@: shr $2,%eax # 128->4, 192->6, 256->8 add $5,%eax # 128->9, 192->11, 256->13 -aes_loop_initial_\@: +.Laes_loop_initial_\@: MOVADQ (%r10),\TMP1 .irpc index, \i_seq aesenc \TMP1, %xmm\index .endr add $16,%r10 sub $1,%eax - jnz aes_loop_initial_\@ + jnz .Laes_loop_initial_\@ MOVADQ (%r10), \TMP1 .irpc index, \i_seq @@ -861,7 +861,7 @@ aes_loop_initial_\@: GHASH_MUL %xmm8, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1 .endif cmp $64, %r13 - jl _initial_blocks_done\@ + jl .L_initial_blocks_done\@ # no need for precomputed values /* * @@ -908,18 +908,18 @@ aes_loop_initial_\@: mov keysize,%eax shr $2,%eax # 128->4, 192->6, 256->8 sub $4,%eax # 128->0, 192->2, 256->4 - jz aes_loop_pre_done\@ + jz .Laes_loop_pre_done\@ -aes_loop_pre_\@: +.Laes_loop_pre_\@: MOVADQ (%r10),\TMP2 .irpc index, 1234 aesenc \TMP2, %xmm\index .endr add $16,%r10 sub $1,%eax - jnz aes_loop_pre_\@ + jnz .Laes_loop_pre_\@ -aes_loop_pre_done\@: +.Laes_loop_pre_done\@: MOVADQ (%r10), \TMP2 aesenclast \TMP2, \XMM1 aesenclast \TMP2, \XMM2 @@ -963,7 +963,7 @@ aes_loop_pre_done\@: pshufb %xmm14, \XMM3 # perform a 16 byte swap pshufb %xmm14, \XMM4 # perform a 16 byte swap -_initial_blocks_done\@: +.L_initial_blocks_done\@: .endm @@ -1095,18 +1095,18 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation mov keysize,%eax shr $2,%eax # 128->4, 192->6, 256->8 sub $4,%eax # 128->0, 192->2, 256->4 - jz aes_loop_par_enc_done\@ + jz .Laes_loop_par_enc_done\@ -aes_loop_par_enc\@: +.Laes_loop_par_enc\@: MOVADQ (%r10),\TMP3 .irpc index, 1234 aesenc \TMP3, %xmm\index .endr add $16,%r10 sub $1,%eax - jnz aes_loop_par_enc\@ + jnz .Laes_loop_par_enc\@ -aes_loop_par_enc_done\@: +.Laes_loop_par_enc_done\@: MOVADQ (%r10), \TMP3 aesenclast \TMP3, \XMM1 # Round 10 aesenclast \TMP3, \XMM2 @@ -1303,18 +1303,18 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation mov keysize,%eax shr $2,%eax # 128->4, 192->6, 256->8 sub $4,%eax # 128->0, 192->2, 256->4 - jz aes_loop_par_dec_done\@ + jz .Laes_loop_par_dec_done\@ -aes_loop_par_dec\@: +.Laes_loop_par_dec\@: MOVADQ (%r10),\TMP3 .irpc index, 1234 aesenc \TMP3, %xmm\index .endr add $16,%r10 sub $1,%eax - jnz aes_loop_par_dec\@ + jnz .Laes_loop_par_dec\@ -aes_loop_par_dec_done\@: +.Laes_loop_par_dec_done\@: MOVADQ (%r10), \TMP3 aesenclast \TMP3, \XMM1 # last round aesenclast \TMP3, \XMM2 @@ -2717,7 +2717,7 @@ SYM_FUNC_END(aesni_cts_cbc_dec) * BSWAP_MASK == endian swapping mask */ SYM_FUNC_START_LOCAL(_aesni_inc_init) - movaps .Lbswap_mask, BSWAP_MASK + movaps .Lbswap_mask(%rip), BSWAP_MASK movaps IV, CTR pshufb BSWAP_MASK, CTR mov $1, TCTR_LOW diff --git a/arch/x86/crypto/aesni-intel_avx-x86_64.S b/arch/x86/crypto/aesni-intel_avx-x86_64.S index 0852ab573fd3..46cddd78857b 100644 --- a/arch/x86/crypto/aesni-intel_avx-x86_64.S +++ b/arch/x86/crypto/aesni-intel_avx-x86_64.S @@ -154,30 +154,6 @@ SHIFT_MASK: .octa 0x0f0e0d0c0b0a09080706050403020100 ALL_F: .octa 0xffffffffffffffffffffffffffffffff .octa 0x00000000000000000000000000000000 -.section .rodata -.align 16 -.type aad_shift_arr, @object -.size aad_shift_arr, 272 -aad_shift_arr: - .octa 0xffffffffffffffffffffffffffffffff - .octa 0xffffffffffffffffffffffffffffff0C - .octa 0xffffffffffffffffffffffffffff0D0C - .octa 0xffffffffffffffffffffffffff0E0D0C - .octa 0xffffffffffffffffffffffff0F0E0D0C - .octa 0xffffffffffffffffffffff0C0B0A0908 - .octa 0xffffffffffffffffffff0D0C0B0A0908 - .octa 0xffffffffffffffffff0E0D0C0B0A0908 - .octa 0xffffffffffffffff0F0E0D0C0B0A0908 - .octa 0xffffffffffffff0C0B0A090807060504 - .octa 0xffffffffffff0D0C0B0A090807060504 - .octa 0xffffffffff0E0D0C0B0A090807060504 - .octa 0xffffffff0F0E0D0C0B0A090807060504 - .octa 0xffffff0C0B0A09080706050403020100 - .octa 0xffff0D0C0B0A09080706050403020100 - .octa 0xff0E0D0C0B0A09080706050403020100 - .octa 0x0F0E0D0C0B0A09080706050403020100 - - .text @@ -302,68 +278,68 @@ VARIABLE_OFFSET = 16*8 mov %r13, %r12 shr $4, %r12 and $7, %r12 - jz _initial_num_blocks_is_0\@ + jz .L_initial_num_blocks_is_0\@ cmp $7, %r12 - je _initial_num_blocks_is_7\@ + je .L_initial_num_blocks_is_7\@ cmp $6, %r12 - je _initial_num_blocks_is_6\@ + je .L_initial_num_blocks_is_6\@ cmp $5, %r12 - je _initial_num_blocks_is_5\@ + je .L_initial_num_blocks_is_5\@ cmp $4, %r12 - je _initial_num_blocks_is_4\@ + je .L_initial_num_blocks_is_4\@ cmp $3, %r12 - je _initial_num_blocks_is_3\@ + je .L_initial_num_blocks_is_3\@ cmp $2, %r12 - je _initial_num_blocks_is_2\@ + je .L_initial_num_blocks_is_2\@ - jmp _initial_num_blocks_is_1\@ + jmp .L_initial_num_blocks_is_1\@ -_initial_num_blocks_is_7\@: +.L_initial_num_blocks_is_7\@: \INITIAL_BLOCKS \REP, 7, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC sub $16*7, %r13 - jmp _initial_blocks_encrypted\@ + jmp .L_initial_blocks_encrypted\@ -_initial_num_blocks_is_6\@: +.L_initial_num_blocks_is_6\@: \INITIAL_BLOCKS \REP, 6, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC sub $16*6, %r13 - jmp _initial_blocks_encrypted\@ + jmp .L_initial_blocks_encrypted\@ -_initial_num_blocks_is_5\@: +.L_initial_num_blocks_is_5\@: \INITIAL_BLOCKS \REP, 5, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC sub $16*5, %r13 - jmp _initial_blocks_encrypted\@ + jmp .L_initial_blocks_encrypted\@ -_initial_num_blocks_is_4\@: +.L_initial_num_blocks_is_4\@: \INITIAL_BLOCKS \REP, 4, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC sub $16*4, %r13 - jmp _initial_blocks_encrypted\@ + jmp .L_initial_blocks_encrypted\@ -_initial_num_blocks_is_3\@: +.L_initial_num_blocks_is_3\@: \INITIAL_BLOCKS \REP, 3, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC sub $16*3, %r13 - jmp _initial_blocks_encrypted\@ + jmp .L_initial_blocks_encrypted\@ -_initial_num_blocks_is_2\@: +.L_initial_num_blocks_is_2\@: \INITIAL_BLOCKS \REP, 2, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC sub $16*2, %r13 - jmp _initial_blocks_encrypted\@ + jmp .L_initial_blocks_encrypted\@ -_initial_num_blocks_is_1\@: +.L_initial_num_blocks_is_1\@: \INITIAL_BLOCKS \REP, 1, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC sub $16*1, %r13 - jmp _initial_blocks_encrypted\@ + jmp .L_initial_blocks_encrypted\@ -_initial_num_blocks_is_0\@: +.L_initial_num_blocks_is_0\@: \INITIAL_BLOCKS \REP, 0, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC -_initial_blocks_encrypted\@: +.L_initial_blocks_encrypted\@: test %r13, %r13 - je _zero_cipher_left\@ + je .L_zero_cipher_left\@ sub $128, %r13 - je _eight_cipher_left\@ + je .L_eight_cipher_left\@ @@ -373,9 +349,9 @@ _initial_blocks_encrypted\@: vpshufb SHUF_MASK(%rip), %xmm9, %xmm9 -_encrypt_by_8_new\@: +.L_encrypt_by_8_new\@: cmp $(255-8), %r15d - jg _encrypt_by_8\@ + jg .L_encrypt_by_8\@ @@ -383,30 +359,30 @@ _encrypt_by_8_new\@: \GHASH_8_ENCRYPT_8_PARALLEL \REP, %xmm0, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm15, out_order, \ENC_DEC add $128, %r11 sub $128, %r13 - jne _encrypt_by_8_new\@ + jne .L_encrypt_by_8_new\@ vpshufb SHUF_MASK(%rip), %xmm9, %xmm9 - jmp _eight_cipher_left\@ + jmp .L_eight_cipher_left\@ -_encrypt_by_8\@: +.L_encrypt_by_8\@: vpshufb SHUF_MASK(%rip), %xmm9, %xmm9 add $8, %r15b \GHASH_8_ENCRYPT_8_PARALLEL \REP, %xmm0, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm15, in_order, \ENC_DEC vpshufb SHUF_MASK(%rip), %xmm9, %xmm9 add $128, %r11 sub $128, %r13 - jne _encrypt_by_8_new\@ + jne .L_encrypt_by_8_new\@ vpshufb SHUF_MASK(%rip), %xmm9, %xmm9 -_eight_cipher_left\@: +.L_eight_cipher_left\@: \GHASH_LAST_8 %xmm0, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm15, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8 -_zero_cipher_left\@: +.L_zero_cipher_left\@: vmovdqu %xmm14, AadHash(arg2) vmovdqu %xmm9, CurCount(arg2) @@ -414,7 +390,7 @@ _zero_cipher_left\@: mov arg5, %r13 and $15, %r13 # r13 = (arg5 mod 16) - je _multiple_of_16_bytes\@ + je .L_multiple_of_16_bytes\@ # handle the last <16 Byte block separately @@ -428,7 +404,7 @@ _zero_cipher_left\@: vmovdqu %xmm9, PBlockEncKey(arg2) cmp $16, arg5 - jge _large_enough_update\@ + jge .L_large_enough_update\@ lea (arg4,%r11,1), %r10 mov %r13, %r12 @@ -440,9 +416,9 @@ _zero_cipher_left\@: # able to shift 16-r13 bytes (r13 is the # number of bytes in plaintext mod 16) - jmp _final_ghash_mul\@ + jmp .L_final_ghash_mul\@ -_large_enough_update\@: +.L_large_enough_update\@: sub $16, %r11 add %r13, %r11 @@ -461,7 +437,7 @@ _large_enough_update\@: # shift right 16-r13 bytes vpshufb %xmm2, %xmm1, %xmm1 -_final_ghash_mul\@: +.L_final_ghash_mul\@: .if \ENC_DEC == DEC vmovdqa %xmm1, %xmm2 vpxor %xmm1, %xmm9, %xmm9 # Plaintext XOR E(K, Yn) @@ -490,7 +466,7 @@ _final_ghash_mul\@: # output r13 Bytes vmovq %xmm9, %rax cmp $8, %r13 - jle _less_than_8_bytes_left\@ + jle .L_less_than_8_bytes_left\@ mov %rax, (arg3 , %r11) add $8, %r11 @@ -498,15 +474,15 @@ _final_ghash_mul\@: vmovq %xmm9, %rax sub $8, %r13 -_less_than_8_bytes_left\@: +.L_less_than_8_bytes_left\@: movb %al, (arg3 , %r11) add $1, %r11 shr $8, %rax sub $1, %r13 - jne _less_than_8_bytes_left\@ + jne .L_less_than_8_bytes_left\@ ############################# -_multiple_of_16_bytes\@: +.L_multiple_of_16_bytes\@: .endm @@ -519,12 +495,12 @@ _multiple_of_16_bytes\@: mov PBlockLen(arg2), %r12 test %r12, %r12 - je _partial_done\@ + je .L_partial_done\@ #GHASH computation for the last <16 Byte block \GHASH_MUL %xmm14, %xmm13, %xmm0, %xmm10, %xmm11, %xmm5, %xmm6 -_partial_done\@: +.L_partial_done\@: mov AadLen(arg2), %r12 # r12 = aadLen (number of bytes) shl $3, %r12 # convert into number of bits vmovd %r12d, %xmm15 # len(A) in xmm15 @@ -547,49 +523,49 @@ _partial_done\@: -_return_T\@: +.L_return_T\@: mov \AUTH_TAG, %r10 # r10 = authTag mov \AUTH_TAG_LEN, %r11 # r11 = auth_tag_len cmp $16, %r11 - je _T_16\@ + je .L_T_16\@ cmp $8, %r11 - jl _T_4\@ + jl .L_T_4\@ -_T_8\@: +.L_T_8\@: vmovq %xmm9, %rax mov %rax, (%r10) add $8, %r10 sub $8, %r11 vpsrldq $8, %xmm9, %xmm9 test %r11, %r11 - je _return_T_done\@ -_T_4\@: + je .L_return_T_done\@ +.L_T_4\@: vmovd %xmm9, %eax mov %eax, (%r10) add $4, %r10 sub $4, %r11 vpsrldq $4, %xmm9, %xmm9 test %r11, %r11 - je _return_T_done\@ -_T_123\@: + je .L_return_T_done\@ +.L_T_123\@: vmovd %xmm9, %eax cmp $2, %r11 - jl _T_1\@ + jl .L_T_1\@ mov %ax, (%r10) cmp $2, %r11 - je _return_T_done\@ + je .L_return_T_done\@ add $2, %r10 sar $16, %eax -_T_1\@: +.L_T_1\@: mov %al, (%r10) - jmp _return_T_done\@ + jmp .L_return_T_done\@ -_T_16\@: +.L_T_16\@: vmovdqu %xmm9, (%r10) -_return_T_done\@: +.L_return_T_done\@: .endm .macro CALC_AAD_HASH GHASH_MUL AAD AADLEN T1 T2 T3 T4 T5 T6 T7 T8 @@ -603,8 +579,8 @@ _return_T_done\@: vpxor \T8, \T8, \T8 vpxor \T7, \T7, \T7 cmp $16, %r11 - jl _get_AAD_rest8\@ -_get_AAD_blocks\@: + jl .L_get_AAD_rest8\@ +.L_get_AAD_blocks\@: vmovdqu (%r10), \T7 vpshufb SHUF_MASK(%rip), \T7, \T7 vpxor \T7, \T8, \T8 @@ -613,29 +589,29 @@ _get_AAD_blocks\@: sub $16, %r12 sub $16, %r11 cmp $16, %r11 - jge _get_AAD_blocks\@ + jge .L_get_AAD_blocks\@ vmovdqu \T8, \T7 test %r11, %r11 - je _get_AAD_done\@ + je .L_get_AAD_done\@ vpxor \T7, \T7, \T7 /* read the last <16B of AAD. since we have at least 4B of data right after the AAD (the ICV, and maybe some CT), we can read 4B/8B blocks safely, and then get rid of the extra stuff */ -_get_AAD_rest8\@: +.L_get_AAD_rest8\@: cmp $4, %r11 - jle _get_AAD_rest4\@ + jle .L_get_AAD_rest4\@ movq (%r10), \T1 add $8, %r10 sub $8, %r11 vpslldq $8, \T1, \T1 vpsrldq $8, \T7, \T7 vpxor \T1, \T7, \T7 - jmp _get_AAD_rest8\@ -_get_AAD_rest4\@: + jmp .L_get_AAD_rest8\@ +.L_get_AAD_rest4\@: test %r11, %r11 - jle _get_AAD_rest0\@ + jle .L_get_AAD_rest0\@ mov (%r10), %eax movq %rax, \T1 add $4, %r10 @@ -643,20 +619,22 @@ _get_AAD_rest4\@: vpslldq $12, \T1, \T1 vpsrldq $4, \T7, \T7 vpxor \T1, \T7, \T7 -_get_AAD_rest0\@: +.L_get_AAD_rest0\@: /* finalize: shift out the extra bytes we read, and align left. since pslldq can only shift by an immediate, we use - vpshufb and an array of shuffle masks */ - movq %r12, %r11 - salq $4, %r11 - vmovdqu aad_shift_arr(%r11), \T1 - vpshufb \T1, \T7, \T7 -_get_AAD_rest_final\@: + vpshufb and a pair of shuffle masks */ + leaq ALL_F(%rip), %r11 + subq %r12, %r11 + vmovdqu 16(%r11), \T1 + andq $~3, %r11 + vpshufb (%r11), \T7, \T7 + vpand \T1, \T7, \T7 +.L_get_AAD_rest_final\@: vpshufb SHUF_MASK(%rip), \T7, \T7 vpxor \T8, \T7, \T7 \GHASH_MUL \T7, \T2, \T1, \T3, \T4, \T5, \T6 -_get_AAD_done\@: +.L_get_AAD_done\@: vmovdqu \T7, AadHash(arg2) .endm @@ -707,28 +685,28 @@ _get_AAD_done\@: vpxor \XMMDst, \XMMDst, \XMMDst cmp $8, \DLEN - jl _read_lt8_\@ + jl .L_read_lt8_\@ mov (\DPTR), %rax vpinsrq $0, %rax, \XMMDst, \XMMDst sub $8, \DLEN - jz _done_read_partial_block_\@ + jz .L_done_read_partial_block_\@ xor %eax, %eax -_read_next_byte_\@: +.L_read_next_byte_\@: shl $8, %rax mov 7(\DPTR, \DLEN, 1), %al dec \DLEN - jnz _read_next_byte_\@ + jnz .L_read_next_byte_\@ vpinsrq $1, %rax, \XMMDst, \XMMDst - jmp _done_read_partial_block_\@ -_read_lt8_\@: + jmp .L_done_read_partial_block_\@ +.L_read_lt8_\@: xor %eax, %eax -_read_next_byte_lt8_\@: +.L_read_next_byte_lt8_\@: shl $8, %rax mov -1(\DPTR, \DLEN, 1), %al dec \DLEN - jnz _read_next_byte_lt8_\@ + jnz .L_read_next_byte_lt8_\@ vpinsrq $0, %rax, \XMMDst, \XMMDst -_done_read_partial_block_\@: +.L_done_read_partial_block_\@: .endm # PARTIAL_BLOCK: Handles encryption/decryption and the tag partial blocks @@ -740,21 +718,21 @@ _done_read_partial_block_\@: AAD_HASH ENC_DEC mov PBlockLen(arg2), %r13 test %r13, %r13 - je _partial_block_done_\@ # Leave Macro if no partial blocks + je .L_partial_block_done_\@ # Leave Macro if no partial blocks # Read in input data without over reading cmp $16, \PLAIN_CYPH_LEN - jl _fewer_than_16_bytes_\@ + jl .L_fewer_than_16_bytes_\@ vmovdqu (\PLAIN_CYPH_IN), %xmm1 # If more than 16 bytes, just fill xmm - jmp _data_read_\@ + jmp .L_data_read_\@ -_fewer_than_16_bytes_\@: +.L_fewer_than_16_bytes_\@: lea (\PLAIN_CYPH_IN, \DATA_OFFSET, 1), %r10 mov \PLAIN_CYPH_LEN, %r12 READ_PARTIAL_BLOCK %r10 %r12 %xmm1 mov PBlockLen(arg2), %r13 -_data_read_\@: # Finished reading in data +.L_data_read_\@: # Finished reading in data vmovdqu PBlockEncKey(arg2), %xmm9 vmovdqu HashKey(arg2), %xmm13 @@ -777,9 +755,9 @@ _data_read_\@: # Finished reading in data sub $16, %r10 # Determine if if partial block is not being filled and # shift mask accordingly - jge _no_extra_mask_1_\@ + jge .L_no_extra_mask_1_\@ sub %r10, %r12 -_no_extra_mask_1_\@: +.L_no_extra_mask_1_\@: vmovdqu ALL_F-SHIFT_MASK(%r12), %xmm1 # get the appropriate mask to mask out bottom r13 bytes of xmm9 @@ -792,17 +770,17 @@ _no_extra_mask_1_\@: vpxor %xmm3, \AAD_HASH, \AAD_HASH test %r10, %r10 - jl _partial_incomplete_1_\@ + jl .L_partial_incomplete_1_\@ # GHASH computation for the last <16 Byte block \GHASH_MUL \AAD_HASH, %xmm13, %xmm0, %xmm10, %xmm11, %xmm5, %xmm6 xor %eax,%eax mov %rax, PBlockLen(arg2) - jmp _dec_done_\@ -_partial_incomplete_1_\@: + jmp .L_dec_done_\@ +.L_partial_incomplete_1_\@: add \PLAIN_CYPH_LEN, PBlockLen(arg2) -_dec_done_\@: +.L_dec_done_\@: vmovdqu \AAD_HASH, AadHash(arg2) .else vpxor %xmm1, %xmm9, %xmm9 # Plaintext XOR E(K, Yn) @@ -813,9 +791,9 @@ _dec_done_\@: sub $16, %r10 # Determine if if partial block is not being filled and # shift mask accordingly - jge _no_extra_mask_2_\@ + jge .L_no_extra_mask_2_\@ sub %r10, %r12 -_no_extra_mask_2_\@: +.L_no_extra_mask_2_\@: vmovdqu ALL_F-SHIFT_MASK(%r12), %xmm1 # get the appropriate mask to mask out bottom r13 bytes of xmm9 @@ -827,17 +805,17 @@ _no_extra_mask_2_\@: vpxor %xmm9, \AAD_HASH, \AAD_HASH test %r10, %r10 - jl _partial_incomplete_2_\@ + jl .L_partial_incomplete_2_\@ # GHASH computation for the last <16 Byte block \GHASH_MUL \AAD_HASH, %xmm13, %xmm0, %xmm10, %xmm11, %xmm5, %xmm6 xor %eax,%eax mov %rax, PBlockLen(arg2) - jmp _encode_done_\@ -_partial_incomplete_2_\@: + jmp .L_encode_done_\@ +.L_partial_incomplete_2_\@: add \PLAIN_CYPH_LEN, PBlockLen(arg2) -_encode_done_\@: +.L_encode_done_\@: vmovdqu \AAD_HASH, AadHash(arg2) vmovdqa SHUF_MASK(%rip), %xmm10 @@ -847,32 +825,32 @@ _encode_done_\@: .endif # output encrypted Bytes test %r10, %r10 - jl _partial_fill_\@ + jl .L_partial_fill_\@ mov %r13, %r12 mov $16, %r13 # Set r13 to be the number of bytes to write out sub %r12, %r13 - jmp _count_set_\@ -_partial_fill_\@: + jmp .L_count_set_\@ +.L_partial_fill_\@: mov \PLAIN_CYPH_LEN, %r13 -_count_set_\@: +.L_count_set_\@: vmovdqa %xmm9, %xmm0 vmovq %xmm0, %rax cmp $8, %r13 - jle _less_than_8_bytes_left_\@ + jle .L_less_than_8_bytes_left_\@ mov %rax, (\CYPH_PLAIN_OUT, \DATA_OFFSET, 1) add $8, \DATA_OFFSET psrldq $8, %xmm0 vmovq %xmm0, %rax sub $8, %r13 -_less_than_8_bytes_left_\@: +.L_less_than_8_bytes_left_\@: movb %al, (\CYPH_PLAIN_OUT, \DATA_OFFSET, 1) add $1, \DATA_OFFSET shr $8, %rax sub $1, %r13 - jne _less_than_8_bytes_left_\@ -_partial_block_done_\@: + jne .L_less_than_8_bytes_left_\@ +.L_partial_block_done_\@: .endm # PARTIAL_BLOCK ############################################################################### @@ -1073,7 +1051,7 @@ _partial_block_done_\@: vmovdqa \XMM8, \T3 cmp $128, %r13 - jl _initial_blocks_done\@ # no need for precomputed constants + jl .L_initial_blocks_done\@ # no need for precomputed constants ############################################################################### # Haskey_i_k holds XORed values of the low and high parts of the Haskey_i @@ -1215,7 +1193,7 @@ _partial_block_done_\@: ############################################################################### -_initial_blocks_done\@: +.L_initial_blocks_done\@: .endm @@ -2023,7 +2001,7 @@ SYM_FUNC_END(aesni_gcm_finalize_avx_gen2) vmovdqa \XMM8, \T3 cmp $128, %r13 - jl _initial_blocks_done\@ # no need for precomputed constants + jl .L_initial_blocks_done\@ # no need for precomputed constants ############################################################################### # Haskey_i_k holds XORed values of the low and high parts of the Haskey_i @@ -2167,7 +2145,7 @@ SYM_FUNC_END(aesni_gcm_finalize_avx_gen2) ############################################################################### -_initial_blocks_done\@: +.L_initial_blocks_done\@: .endm diff --git a/arch/x86/crypto/aria-aesni-avx-asm_64.S b/arch/x86/crypto/aria-aesni-avx-asm_64.S index 9243f6289d34..7c1abc513f34 100644 --- a/arch/x86/crypto/aria-aesni-avx-asm_64.S +++ b/arch/x86/crypto/aria-aesni-avx-asm_64.S @@ -80,7 +80,7 @@ transpose_4x4(c0, c1, c2, c3, a0, a1); \ transpose_4x4(d0, d1, d2, d3, a0, a1); \ \ - vmovdqu .Lshufb_16x16b, a0; \ + vmovdqu .Lshufb_16x16b(%rip), a0; \ vmovdqu st1, a1; \ vpshufb a0, a2, a2; \ vpshufb a0, a3, a3; \ @@ -132,7 +132,7 @@ transpose_4x4(c0, c1, c2, c3, a0, a1); \ transpose_4x4(d0, d1, d2, d3, a0, a1); \ \ - vmovdqu .Lshufb_16x16b, a0; \ + vmovdqu .Lshufb_16x16b(%rip), a0; \ vmovdqu st1, a1; \ vpshufb a0, a2, a2; \ vpshufb a0, a3, a3; \ @@ -300,11 +300,11 @@ x4, x5, x6, x7, \ t0, t1, t2, t3, \ t4, t5, t6, t7) \ - vmovdqa .Ltf_s2_bitmatrix, t0; \ - vmovdqa .Ltf_inv_bitmatrix, t1; \ - vmovdqa .Ltf_id_bitmatrix, t2; \ - vmovdqa .Ltf_aff_bitmatrix, t3; \ - vmovdqa .Ltf_x2_bitmatrix, t4; \ + vmovdqa .Ltf_s2_bitmatrix(%rip), t0; \ + vmovdqa .Ltf_inv_bitmatrix(%rip), t1; \ + vmovdqa .Ltf_id_bitmatrix(%rip), t2; \ + vmovdqa .Ltf_aff_bitmatrix(%rip), t3; \ + vmovdqa .Ltf_x2_bitmatrix(%rip), t4; \ vgf2p8affineinvqb $(tf_s2_const), t0, x1, x1; \ vgf2p8affineinvqb $(tf_s2_const), t0, x5, x5; \ vgf2p8affineqb $(tf_inv_const), t1, x2, x2; \ @@ -324,13 +324,13 @@ x4, x5, x6, x7, \ t0, t1, t2, t3, \ t4, t5, t6, t7) \ - vmovdqa .Linv_shift_row, t0; \ - vmovdqa .Lshift_row, t1; \ - vbroadcastss .L0f0f0f0f, t6; \ - vmovdqa .Ltf_lo__inv_aff__and__s2, t2; \ - vmovdqa .Ltf_hi__inv_aff__and__s2, t3; \ - vmovdqa .Ltf_lo__x2__and__fwd_aff, t4; \ - vmovdqa .Ltf_hi__x2__and__fwd_aff, t5; \ + vmovdqa .Linv_shift_row(%rip), t0; \ + vmovdqa .Lshift_row(%rip), t1; \ + vbroadcastss .L0f0f0f0f(%rip), t6; \ + vmovdqa .Ltf_lo__inv_aff__and__s2(%rip), t2; \ + vmovdqa .Ltf_hi__inv_aff__and__s2(%rip), t3; \ + vmovdqa .Ltf_lo__x2__and__fwd_aff(%rip), t4; \ + vmovdqa .Ltf_hi__x2__and__fwd_aff(%rip), t5; \ \ vaesenclast t7, x0, x0; \ vaesenclast t7, x4, x4; \ diff --git a/arch/x86/crypto/aria-aesni-avx2-asm_64.S b/arch/x86/crypto/aria-aesni-avx2-asm_64.S index 82a14b4ad920..c60fa2980630 100644 --- a/arch/x86/crypto/aria-aesni-avx2-asm_64.S +++ b/arch/x86/crypto/aria-aesni-avx2-asm_64.S @@ -96,7 +96,7 @@ transpose_4x4(c0, c1, c2, c3, a0, a1); \ transpose_4x4(d0, d1, d2, d3, a0, a1); \ \ - vbroadcasti128 .Lshufb_16x16b, a0; \ + vbroadcasti128 .Lshufb_16x16b(%rip), a0; \ vmovdqu st1, a1; \ vpshufb a0, a2, a2; \ vpshufb a0, a3, a3; \ @@ -148,7 +148,7 @@ transpose_4x4(c0, c1, c2, c3, a0, a1); \ transpose_4x4(d0, d1, d2, d3, a0, a1); \ \ - vbroadcasti128 .Lshufb_16x16b, a0; \ + vbroadcasti128 .Lshufb_16x16b(%rip), a0; \ vmovdqu st1, a1; \ vpshufb a0, a2, a2; \ vpshufb a0, a3, a3; \ @@ -307,11 +307,11 @@ x4, x5, x6, x7, \ t0, t1, t2, t3, \ t4, t5, t6, t7) \ - vpbroadcastq .Ltf_s2_bitmatrix, t0; \ - vpbroadcastq .Ltf_inv_bitmatrix, t1; \ - vpbroadcastq .Ltf_id_bitmatrix, t2; \ - vpbroadcastq .Ltf_aff_bitmatrix, t3; \ - vpbroadcastq .Ltf_x2_bitmatrix, t4; \ + vpbroadcastq .Ltf_s2_bitmatrix(%rip), t0; \ + vpbroadcastq .Ltf_inv_bitmatrix(%rip), t1; \ + vpbroadcastq .Ltf_id_bitmatrix(%rip), t2; \ + vpbroadcastq .Ltf_aff_bitmatrix(%rip), t3; \ + vpbroadcastq .Ltf_x2_bitmatrix(%rip), t4; \ vgf2p8affineinvqb $(tf_s2_const), t0, x1, x1; \ vgf2p8affineinvqb $(tf_s2_const), t0, x5, x5; \ vgf2p8affineqb $(tf_inv_const), t1, x2, x2; \ @@ -332,12 +332,12 @@ t4, t5, t6, t7) \ vpxor t7, t7, t7; \ vpxor t6, t6, t6; \ - vbroadcasti128 .Linv_shift_row, t0; \ - vbroadcasti128 .Lshift_row, t1; \ - vbroadcasti128 .Ltf_lo__inv_aff__and__s2, t2; \ - vbroadcasti128 .Ltf_hi__inv_aff__and__s2, t3; \ - vbroadcasti128 .Ltf_lo__x2__and__fwd_aff, t4; \ - vbroadcasti128 .Ltf_hi__x2__and__fwd_aff, t5; \ + vbroadcasti128 .Linv_shift_row(%rip), t0; \ + vbroadcasti128 .Lshift_row(%rip), t1; \ + vbroadcasti128 .Ltf_lo__inv_aff__and__s2(%rip), t2; \ + vbroadcasti128 .Ltf_hi__inv_aff__and__s2(%rip), t3; \ + vbroadcasti128 .Ltf_lo__x2__and__fwd_aff(%rip), t4; \ + vbroadcasti128 .Ltf_hi__x2__and__fwd_aff(%rip), t5; \ \ vextracti128 $1, x0, t6##_x; \ vaesenclast t7##_x, x0##_x, x0##_x; \ @@ -369,7 +369,7 @@ vaesdeclast t7##_x, t6##_x, t6##_x; \ vinserti128 $1, t6##_x, x6, x6; \ \ - vpbroadcastd .L0f0f0f0f, t6; \ + vpbroadcastd .L0f0f0f0f(%rip), t6; \ \ /* AES inverse shift rows */ \ vpshufb t0, x0, x0; \ diff --git a/arch/x86/crypto/aria-gfni-avx512-asm_64.S b/arch/x86/crypto/aria-gfni-avx512-asm_64.S index 3193f0701450..860887e5d02e 100644 --- a/arch/x86/crypto/aria-gfni-avx512-asm_64.S +++ b/arch/x86/crypto/aria-gfni-avx512-asm_64.S @@ -80,7 +80,7 @@ transpose_4x4(c0, c1, c2, c3, a0, a1); \ transpose_4x4(d0, d1, d2, d3, a0, a1); \ \ - vbroadcasti64x2 .Lshufb_16x16b, a0; \ + vbroadcasti64x2 .Lshufb_16x16b(%rip), a0; \ vmovdqu64 st1, a1; \ vpshufb a0, a2, a2; \ vpshufb a0, a3, a3; \ @@ -132,7 +132,7 @@ transpose_4x4(c0, c1, c2, c3, a0, a1); \ transpose_4x4(d0, d1, d2, d3, a0, a1); \ \ - vbroadcasti64x2 .Lshufb_16x16b, a0; \ + vbroadcasti64x2 .Lshufb_16x16b(%rip), a0; \ vmovdqu64 st1, a1; \ vpshufb a0, a2, a2; \ vpshufb a0, a3, a3; \ @@ -308,11 +308,11 @@ x4, x5, x6, x7, \ t0, t1, t2, t3, \ t4, t5, t6, t7) \ - vpbroadcastq .Ltf_s2_bitmatrix, t0; \ - vpbroadcastq .Ltf_inv_bitmatrix, t1; \ - vpbroadcastq .Ltf_id_bitmatrix, t2; \ - vpbroadcastq .Ltf_aff_bitmatrix, t3; \ - vpbroadcastq .Ltf_x2_bitmatrix, t4; \ + vpbroadcastq .Ltf_s2_bitmatrix(%rip), t0; \ + vpbroadcastq .Ltf_inv_bitmatrix(%rip), t1; \ + vpbroadcastq .Ltf_id_bitmatrix(%rip), t2; \ + vpbroadcastq .Ltf_aff_bitmatrix(%rip), t3; \ + vpbroadcastq .Ltf_x2_bitmatrix(%rip), t4; \ vgf2p8affineinvqb $(tf_s2_const), t0, x1, x1; \ vgf2p8affineinvqb $(tf_s2_const), t0, x5, x5; \ vgf2p8affineqb $(tf_inv_const), t1, x2, x2; \ @@ -332,11 +332,11 @@ y4, y5, y6, y7, \ t0, t1, t2, t3, \ t4, t5, t6, t7) \ - vpbroadcastq .Ltf_s2_bitmatrix, t0; \ - vpbroadcastq .Ltf_inv_bitmatrix, t1; \ - vpbroadcastq .Ltf_id_bitmatrix, t2; \ - vpbroadcastq .Ltf_aff_bitmatrix, t3; \ - vpbroadcastq .Ltf_x2_bitmatrix, t4; \ + vpbroadcastq .Ltf_s2_bitmatrix(%rip), t0; \ + vpbroadcastq .Ltf_inv_bitmatrix(%rip), t1; \ + vpbroadcastq .Ltf_id_bitmatrix(%rip), t2; \ + vpbroadcastq .Ltf_aff_bitmatrix(%rip), t3; \ + vpbroadcastq .Ltf_x2_bitmatrix(%rip), t4; \ vgf2p8affineinvqb $(tf_s2_const), t0, x1, x1; \ vgf2p8affineinvqb $(tf_s2_const), t0, x5, x5; \ vgf2p8affineqb $(tf_inv_const), t1, x2, x2; \ diff --git a/arch/x86/crypto/camellia-aesni-avx-asm_64.S b/arch/x86/crypto/camellia-aesni-avx-asm_64.S index 4a30618281ec..646477a13e11 100644 --- a/arch/x86/crypto/camellia-aesni-avx-asm_64.S +++ b/arch/x86/crypto/camellia-aesni-avx-asm_64.S @@ -52,10 +52,10 @@ /* \ * S-function with AES subbytes \ */ \ - vmovdqa .Linv_shift_row, t4; \ - vbroadcastss .L0f0f0f0f, t7; \ - vmovdqa .Lpre_tf_lo_s1, t0; \ - vmovdqa .Lpre_tf_hi_s1, t1; \ + vmovdqa .Linv_shift_row(%rip), t4; \ + vbroadcastss .L0f0f0f0f(%rip), t7; \ + vmovdqa .Lpre_tf_lo_s1(%rip), t0; \ + vmovdqa .Lpre_tf_hi_s1(%rip), t1; \ \ /* AES inverse shift rows */ \ vpshufb t4, x0, x0; \ @@ -68,8 +68,8 @@ vpshufb t4, x6, x6; \ \ /* prefilter sboxes 1, 2 and 3 */ \ - vmovdqa .Lpre_tf_lo_s4, t2; \ - vmovdqa .Lpre_tf_hi_s4, t3; \ + vmovdqa .Lpre_tf_lo_s4(%rip), t2; \ + vmovdqa .Lpre_tf_hi_s4(%rip), t3; \ filter_8bit(x0, t0, t1, t7, t6); \ filter_8bit(x7, t0, t1, t7, t6); \ filter_8bit(x1, t0, t1, t7, t6); \ @@ -83,8 +83,8 @@ filter_8bit(x6, t2, t3, t7, t6); \ \ /* AES subbytes + AES shift rows */ \ - vmovdqa .Lpost_tf_lo_s1, t0; \ - vmovdqa .Lpost_tf_hi_s1, t1; \ + vmovdqa .Lpost_tf_lo_s1(%rip), t0; \ + vmovdqa .Lpost_tf_hi_s1(%rip), t1; \ vaesenclast t4, x0, x0; \ vaesenclast t4, x7, x7; \ vaesenclast t4, x1, x1; \ @@ -95,16 +95,16 @@ vaesenclast t4, x6, x6; \ \ /* postfilter sboxes 1 and 4 */ \ - vmovdqa .Lpost_tf_lo_s3, t2; \ - vmovdqa .Lpost_tf_hi_s3, t3; \ + vmovdqa .Lpost_tf_lo_s3(%rip), t2; \ + vmovdqa .Lpost_tf_hi_s3(%rip), t3; \ filter_8bit(x0, t0, t1, t7, t6); \ filter_8bit(x7, t0, t1, t7, t6); \ filter_8bit(x3, t0, t1, t7, t6); \ filter_8bit(x6, t0, t1, t7, t6); \ \ /* postfilter sbox 3 */ \ - vmovdqa .Lpost_tf_lo_s2, t4; \ - vmovdqa .Lpost_tf_hi_s2, t5; \ + vmovdqa .Lpost_tf_lo_s2(%rip), t4; \ + vmovdqa .Lpost_tf_hi_s2(%rip), t5; \ filter_8bit(x2, t2, t3, t7, t6); \ filter_8bit(x5, t2, t3, t7, t6); \ \ @@ -443,7 +443,7 @@ SYM_FUNC_END(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab) transpose_4x4(c0, c1, c2, c3, a0, a1); \ transpose_4x4(d0, d1, d2, d3, a0, a1); \ \ - vmovdqu .Lshufb_16x16b, a0; \ + vmovdqu .Lshufb_16x16b(%rip), a0; \ vmovdqu st1, a1; \ vpshufb a0, a2, a2; \ vpshufb a0, a3, a3; \ @@ -482,7 +482,7 @@ SYM_FUNC_END(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab) #define inpack16_pre(x0, x1, x2, x3, x4, x5, x6, x7, y0, y1, y2, y3, y4, y5, \ y6, y7, rio, key) \ vmovq key, x0; \ - vpshufb .Lpack_bswap, x0, x0; \ + vpshufb .Lpack_bswap(%rip), x0, x0; \ \ vpxor 0 * 16(rio), x0, y7; \ vpxor 1 * 16(rio), x0, y6; \ @@ -533,7 +533,7 @@ SYM_FUNC_END(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab) vmovdqu x0, stack_tmp0; \ \ vmovq key, x0; \ - vpshufb .Lpack_bswap, x0, x0; \ + vpshufb .Lpack_bswap(%rip), x0, x0; \ \ vpxor x0, y7, y7; \ vpxor x0, y6, y6; \ diff --git a/arch/x86/crypto/camellia-aesni-avx2-asm_64.S b/arch/x86/crypto/camellia-aesni-avx2-asm_64.S index deaf62aa73a6..a0eb94e53b1b 100644 --- a/arch/x86/crypto/camellia-aesni-avx2-asm_64.S +++ b/arch/x86/crypto/camellia-aesni-avx2-asm_64.S @@ -64,12 +64,12 @@ /* \ * S-function with AES subbytes \ */ \ - vbroadcasti128 .Linv_shift_row, t4; \ - vpbroadcastd .L0f0f0f0f, t7; \ - vbroadcasti128 .Lpre_tf_lo_s1, t5; \ - vbroadcasti128 .Lpre_tf_hi_s1, t6; \ - vbroadcasti128 .Lpre_tf_lo_s4, t2; \ - vbroadcasti128 .Lpre_tf_hi_s4, t3; \ + vbroadcasti128 .Linv_shift_row(%rip), t4; \ + vpbroadcastd .L0f0f0f0f(%rip), t7; \ + vbroadcasti128 .Lpre_tf_lo_s1(%rip), t5; \ + vbroadcasti128 .Lpre_tf_hi_s1(%rip), t6; \ + vbroadcasti128 .Lpre_tf_lo_s4(%rip), t2; \ + vbroadcasti128 .Lpre_tf_hi_s4(%rip), t3; \ \ /* AES inverse shift rows */ \ vpshufb t4, x0, x0; \ @@ -115,8 +115,8 @@ vinserti128 $1, t2##_x, x6, x6; \ vextracti128 $1, x1, t3##_x; \ vextracti128 $1, x4, t2##_x; \ - vbroadcasti128 .Lpost_tf_lo_s1, t0; \ - vbroadcasti128 .Lpost_tf_hi_s1, t1; \ + vbroadcasti128 .Lpost_tf_lo_s1(%rip), t0; \ + vbroadcasti128 .Lpost_tf_hi_s1(%rip), t1; \ vaesenclast t4##_x, x2##_x, x2##_x; \ vaesenclast t4##_x, t6##_x, t6##_x; \ vinserti128 $1, t6##_x, x2, x2; \ @@ -131,16 +131,16 @@ vinserti128 $1, t2##_x, x4, x4; \ \ /* postfilter sboxes 1 and 4 */ \ - vbroadcasti128 .Lpost_tf_lo_s3, t2; \ - vbroadcasti128 .Lpost_tf_hi_s3, t3; \ + vbroadcasti128 .Lpost_tf_lo_s3(%rip), t2; \ + vbroadcasti128 .Lpost_tf_hi_s3(%rip), t3; \ filter_8bit(x0, t0, t1, t7, t6); \ filter_8bit(x7, t0, t1, t7, t6); \ filter_8bit(x3, t0, t1, t7, t6); \ filter_8bit(x6, t0, t1, t7, t6); \ \ /* postfilter sbox 3 */ \ - vbroadcasti128 .Lpost_tf_lo_s2, t4; \ - vbroadcasti128 .Lpost_tf_hi_s2, t5; \ + vbroadcasti128 .Lpost_tf_lo_s2(%rip), t4; \ + vbroadcasti128 .Lpost_tf_hi_s2(%rip), t5; \ filter_8bit(x2, t2, t3, t7, t6); \ filter_8bit(x5, t2, t3, t7, t6); \ \ @@ -475,7 +475,7 @@ SYM_FUNC_END(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab) transpose_4x4(c0, c1, c2, c3, a0, a1); \ transpose_4x4(d0, d1, d2, d3, a0, a1); \ \ - vbroadcasti128 .Lshufb_16x16b, a0; \ + vbroadcasti128 .Lshufb_16x16b(%rip), a0; \ vmovdqu st1, a1; \ vpshufb a0, a2, a2; \ vpshufb a0, a3, a3; \ @@ -514,7 +514,7 @@ SYM_FUNC_END(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab) #define inpack32_pre(x0, x1, x2, x3, x4, x5, x6, x7, y0, y1, y2, y3, y4, y5, \ y6, y7, rio, key) \ vpbroadcastq key, x0; \ - vpshufb .Lpack_bswap, x0, x0; \ + vpshufb .Lpack_bswap(%rip), x0, x0; \ \ vpxor 0 * 32(rio), x0, y7; \ vpxor 1 * 32(rio), x0, y6; \ @@ -565,7 +565,7 @@ SYM_FUNC_END(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab) vmovdqu x0, stack_tmp0; \ \ vpbroadcastq key, x0; \ - vpshufb .Lpack_bswap, x0, x0; \ + vpshufb .Lpack_bswap(%rip), x0, x0; \ \ vpxor x0, y7, y7; \ vpxor x0, y6, y6; \ diff --git a/arch/x86/crypto/camellia-x86_64-asm_64.S b/arch/x86/crypto/camellia-x86_64-asm_64.S index 347c059f5940..816b6bb8bded 100644 --- a/arch/x86/crypto/camellia-x86_64-asm_64.S +++ b/arch/x86/crypto/camellia-x86_64-asm_64.S @@ -77,11 +77,13 @@ #define RXORbl %r9b #define xor2ror16(T0, T1, tmp1, tmp2, ab, dst) \ + leaq T0(%rip), tmp1; \ movzbl ab ## bl, tmp2 ## d; \ + xorq (tmp1, tmp2, 8), dst; \ + leaq T1(%rip), tmp2; \ movzbl ab ## bh, tmp1 ## d; \ rorq $16, ab; \ - xorq T0(, tmp2, 8), dst; \ - xorq T1(, tmp1, 8), dst; + xorq (tmp2, tmp1, 8), dst; /********************************************************************** 1-way camellia diff --git a/arch/x86/crypto/cast5-avx-x86_64-asm_64.S b/arch/x86/crypto/cast5-avx-x86_64-asm_64.S index 0326a01503c3..b4e460a87f18 100644 --- a/arch/x86/crypto/cast5-avx-x86_64-asm_64.S +++ b/arch/x86/crypto/cast5-avx-x86_64-asm_64.S @@ -84,15 +84,19 @@ #define lookup_32bit(src, dst, op1, op2, op3, interleave_op, il_reg) \ movzbl src ## bh, RID1d; \ + leaq s1(%rip), RID2; \ + movl (RID2,RID1,4), dst ## d; \ movzbl src ## bl, RID2d; \ + leaq s2(%rip), RID1; \ + op1 (RID1,RID2,4), dst ## d; \ shrq $16, src; \ - movl s1(, RID1, 4), dst ## d; \ - op1 s2(, RID2, 4), dst ## d; \ movzbl src ## bh, RID1d; \ + leaq s3(%rip), RID2; \ + op2 (RID2,RID1,4), dst ## d; \ movzbl src ## bl, RID2d; \ interleave_op(il_reg); \ - op2 s3(, RID1, 4), dst ## d; \ - op3 s4(, RID2, 4), dst ## d; + leaq s4(%rip), RID1; \ + op3 (RID1,RID2,4), dst ## d; #define dummy(d) /* do nothing */ @@ -151,15 +155,15 @@ subround(l ## 3, r ## 3, l ## 4, r ## 4, f); #define enc_preload_rkr() \ - vbroadcastss .L16_mask, RKR; \ + vbroadcastss .L16_mask(%rip), RKR; \ /* add 16-bit rotation to key rotations (mod 32) */ \ vpxor kr(CTX), RKR, RKR; #define dec_preload_rkr() \ - vbroadcastss .L16_mask, RKR; \ + vbroadcastss .L16_mask(%rip), RKR; \ /* add 16-bit rotation to key rotations (mod 32) */ \ vpxor kr(CTX), RKR, RKR; \ - vpshufb .Lbswap128_mask, RKR, RKR; + vpshufb .Lbswap128_mask(%rip), RKR, RKR; #define transpose_2x4(x0, x1, t0, t1) \ vpunpckldq x1, x0, t0; \ @@ -235,9 +239,9 @@ SYM_FUNC_START_LOCAL(__cast5_enc_blk16) movq %rdi, CTX; - vmovdqa .Lbswap_mask, RKM; - vmovd .Lfirst_mask, R1ST; - vmovd .L32_mask, R32; + vmovdqa .Lbswap_mask(%rip), RKM; + vmovd .Lfirst_mask(%rip), R1ST; + vmovd .L32_mask(%rip), R32; enc_preload_rkr(); inpack_blocks(RL1, RR1, RTMP, RX, RKM); @@ -271,7 +275,7 @@ SYM_FUNC_START_LOCAL(__cast5_enc_blk16) popq %rbx; popq %r15; - vmovdqa .Lbswap_mask, RKM; + vmovdqa .Lbswap_mask(%rip), RKM; outunpack_blocks(RR1, RL1, RTMP, RX, RKM); outunpack_blocks(RR2, RL2, RTMP, RX, RKM); @@ -308,9 +312,9 @@ SYM_FUNC_START_LOCAL(__cast5_dec_blk16) movq %rdi, CTX; - vmovdqa .Lbswap_mask, RKM; - vmovd .Lfirst_mask, R1ST; - vmovd .L32_mask, R32; + vmovdqa .Lbswap_mask(%rip), RKM; + vmovd .Lfirst_mask(%rip), R1ST; + vmovd .L32_mask(%rip), R32; dec_preload_rkr(); inpack_blocks(RL1, RR1, RTMP, RX, RKM); @@ -341,7 +345,7 @@ SYM_FUNC_START_LOCAL(__cast5_dec_blk16) round(RL, RR, 1, 2); round(RR, RL, 0, 1); - vmovdqa .Lbswap_mask, RKM; + vmovdqa .Lbswap_mask(%rip), RKM; popq %rbx; popq %r15; @@ -504,8 +508,8 @@ SYM_FUNC_START(cast5_ctr_16way) vpcmpeqd RKR, RKR, RKR; vpaddq RKR, RKR, RKR; /* low: -2, high: -2 */ - vmovdqa .Lbswap_iv_mask, R1ST; - vmovdqa .Lbswap128_mask, RKM; + vmovdqa .Lbswap_iv_mask(%rip), R1ST; + vmovdqa .Lbswap128_mask(%rip), RKM; /* load IV and byteswap */ vmovq (%rcx), RX; diff --git a/arch/x86/crypto/cast6-avx-x86_64-asm_64.S b/arch/x86/crypto/cast6-avx-x86_64-asm_64.S index 82b716fd5dba..9e86d460b409 100644 --- a/arch/x86/crypto/cast6-avx-x86_64-asm_64.S +++ b/arch/x86/crypto/cast6-avx-x86_64-asm_64.S @@ -84,15 +84,19 @@ #define lookup_32bit(src, dst, op1, op2, op3, interleave_op, il_reg) \ movzbl src ## bh, RID1d; \ + leaq s1(%rip), RID2; \ + movl (RID2,RID1,4), dst ## d; \ movzbl src ## bl, RID2d; \ + leaq s2(%rip), RID1; \ + op1 (RID1,RID2,4), dst ## d; \ shrq $16, src; \ - movl s1(, RID1, 4), dst ## d; \ - op1 s2(, RID2, 4), dst ## d; \ movzbl src ## bh, RID1d; \ + leaq s3(%rip), RID2; \ + op2 (RID2,RID1,4), dst ## d; \ movzbl src ## bl, RID2d; \ interleave_op(il_reg); \ - op2 s3(, RID1, 4), dst ## d; \ - op3 s4(, RID2, 4), dst ## d; + leaq s4(%rip), RID1; \ + op3 (RID1,RID2,4), dst ## d; #define dummy(d) /* do nothing */ @@ -175,10 +179,10 @@ qop(RD, RC, 1); #define shuffle(mask) \ - vpshufb mask, RKR, RKR; + vpshufb mask(%rip), RKR, RKR; #define preload_rkr(n, do_mask, mask) \ - vbroadcastss .L16_mask, RKR; \ + vbroadcastss .L16_mask(%rip), RKR; \ /* add 16-bit rotation to key rotations (mod 32) */ \ vpxor (kr+n*16)(CTX), RKR, RKR; \ do_mask(mask); @@ -258,9 +262,9 @@ SYM_FUNC_START_LOCAL(__cast6_enc_blk8) movq %rdi, CTX; - vmovdqa .Lbswap_mask, RKM; - vmovd .Lfirst_mask, R1ST; - vmovd .L32_mask, R32; + vmovdqa .Lbswap_mask(%rip), RKM; + vmovd .Lfirst_mask(%rip), R1ST; + vmovd .L32_mask(%rip), R32; inpack_blocks(RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM); inpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM); @@ -284,7 +288,7 @@ SYM_FUNC_START_LOCAL(__cast6_enc_blk8) popq %rbx; popq %r15; - vmovdqa .Lbswap_mask, RKM; + vmovdqa .Lbswap_mask(%rip), RKM; outunpack_blocks(RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM); outunpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM); @@ -306,9 +310,9 @@ SYM_FUNC_START_LOCAL(__cast6_dec_blk8) movq %rdi, CTX; - vmovdqa .Lbswap_mask, RKM; - vmovd .Lfirst_mask, R1ST; - vmovd .L32_mask, R32; + vmovdqa .Lbswap_mask(%rip), RKM; + vmovd .Lfirst_mask(%rip), R1ST; + vmovd .L32_mask(%rip), R32; inpack_blocks(RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM); inpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM); @@ -332,7 +336,7 @@ SYM_FUNC_START_LOCAL(__cast6_dec_blk8) popq %rbx; popq %r15; - vmovdqa .Lbswap_mask, RKM; + vmovdqa .Lbswap_mask(%rip), RKM; outunpack_blocks(RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM); outunpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM); diff --git a/arch/x86/crypto/crc32-pclmul_asm.S b/arch/x86/crypto/crc32-pclmul_asm.S index ca53e96996ac..5d31137e2c7d 100644 --- a/arch/x86/crypto/crc32-pclmul_asm.S +++ b/arch/x86/crypto/crc32-pclmul_asm.S @@ -90,7 +90,7 @@ SYM_FUNC_START(crc32_pclmul_le_16) /* buffer and buffer size are 16 bytes aligne sub $0x40, LEN add $0x40, BUF cmp $0x40, LEN - jb less_64 + jb .Lless_64 #ifdef __x86_64__ movdqa .Lconstant_R2R1(%rip), CONSTANT @@ -98,7 +98,7 @@ SYM_FUNC_START(crc32_pclmul_le_16) /* buffer and buffer size are 16 bytes aligne movdqa .Lconstant_R2R1, CONSTANT #endif -loop_64:/* 64 bytes Full cache line folding */ +.Lloop_64:/* 64 bytes Full cache line folding */ prefetchnta 0x40(BUF) movdqa %xmm1, %xmm5 movdqa %xmm2, %xmm6 @@ -139,8 +139,8 @@ loop_64:/* 64 bytes Full cache line folding */ sub $0x40, LEN add $0x40, BUF cmp $0x40, LEN - jge loop_64 -less_64:/* Folding cache line into 128bit */ + jge .Lloop_64 +.Lless_64:/* Folding cache line into 128bit */ #ifdef __x86_64__ movdqa .Lconstant_R4R3(%rip), CONSTANT #else @@ -167,8 +167,8 @@ less_64:/* Folding cache line into 128bit */ pxor %xmm4, %xmm1 cmp $0x10, LEN - jb fold_64 -loop_16:/* Folding rest buffer into 128bit */ + jb .Lfold_64 +.Lloop_16:/* Folding rest buffer into 128bit */ movdqa %xmm1, %xmm5 pclmulqdq $0x00, CONSTANT, %xmm1 pclmulqdq $0x11, CONSTANT, %xmm5 @@ -177,9 +177,9 @@ loop_16:/* Folding rest buffer into 128bit */ sub $0x10, LEN add $0x10, BUF cmp $0x10, LEN - jge loop_16 + jge .Lloop_16 -fold_64: +.Lfold_64: /* perform the last 64 bit fold, also adds 32 zeroes * to the input stream */ pclmulqdq $0x01, %xmm1, CONSTANT /* R4 * xmm1.low */ diff --git a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S index ec35915f0901..81ce0f4db555 100644 --- a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S +++ b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S @@ -49,15 +49,15 @@ ## ISCSI CRC 32 Implementation with crc32 and pclmulqdq Instruction .macro LABEL prefix n -\prefix\n\(): +.L\prefix\n\(): .endm .macro JMPTBL_ENTRY i -.quad crc_\i +.quad .Lcrc_\i .endm .macro JNC_LESS_THAN j - jnc less_than_\j + jnc .Lless_than_\j .endm # Define threshold where buffers are considered "small" and routed to more @@ -108,30 +108,30 @@ SYM_FUNC_START(crc_pcl) neg %bufp and $7, %bufp # calculate the unalignment amount of # the address - je proc_block # Skip if aligned + je .Lproc_block # Skip if aligned ## If len is less than 8 and we're unaligned, we need to jump ## to special code to avoid reading beyond the end of the buffer cmp $8, len - jae do_align + jae .Ldo_align # less_than_8 expects length in upper 3 bits of len_dw # less_than_8_post_shl1 expects length = carryflag * 8 + len_dw[31:30] shl $32-3+1, len_dw - jmp less_than_8_post_shl1 + jmp .Lless_than_8_post_shl1 -do_align: +.Ldo_align: #### Calculate CRC of unaligned bytes of the buffer (if any) movq (bufptmp), tmp # load a quadward from the buffer add %bufp, bufptmp # align buffer pointer for quadword # processing sub %bufp, len # update buffer length -align_loop: +.Lalign_loop: crc32b %bl, crc_init_dw # compute crc32 of 1-byte shr $8, tmp # get next byte dec %bufp - jne align_loop + jne .Lalign_loop -proc_block: +.Lproc_block: ################################################################ ## 2) PROCESS BLOCKS: @@ -141,11 +141,11 @@ proc_block: movq len, tmp # save num bytes in tmp cmpq $128*24, len - jae full_block + jae .Lfull_block -continue_block: +.Lcontinue_block: cmpq $SMALL_SIZE, len - jb small + jb .Lsmall ## len < 128*24 movq $2731, %rax # 2731 = ceil(2^16 / 24) @@ -168,13 +168,14 @@ continue_block: xor crc2, crc2 ## branch into array - mov jump_table(,%rax,8), %bufp + leaq jump_table(%rip), %bufp + mov (%bufp,%rax,8), %bufp JMP_NOSPEC bufp ################################################################ ## 2a) PROCESS FULL BLOCKS: ################################################################ -full_block: +.Lfull_block: movl $128,%eax lea 128*8*2(block_0), block_1 lea 128*8*3(block_0), block_2 @@ -189,7 +190,6 @@ full_block: ## 3) CRC Array: ################################################################ -crc_array: i=128 .rept 128-1 .altmacro @@ -242,28 +242,28 @@ LABEL crc_ 0 ENDBR mov tmp, len cmp $128*24, tmp - jae full_block + jae .Lfull_block cmp $24, tmp - jae continue_block + jae .Lcontinue_block -less_than_24: +.Lless_than_24: shl $32-4, len_dw # less_than_16 expects length # in upper 4 bits of len_dw - jnc less_than_16 + jnc .Lless_than_16 crc32q (bufptmp), crc_init crc32q 8(bufptmp), crc_init - jz do_return + jz .Ldo_return add $16, bufptmp # len is less than 8 if we got here # less_than_8 expects length in upper 3 bits of len_dw # less_than_8_post_shl1 expects length = carryflag * 8 + len_dw[31:30] shl $2, len_dw - jmp less_than_8_post_shl1 + jmp .Lless_than_8_post_shl1 ####################################################################### ## 6) LESS THAN 256-bytes REMAIN AT THIS POINT (8-bits of len are full) ####################################################################### -small: +.Lsmall: shl $32-8, len_dw # Prepare len_dw for less_than_256 j=256 .rept 5 # j = {256, 128, 64, 32, 16} @@ -279,32 +279,32 @@ LABEL less_than_ %j # less_than_j: Length should be in crc32q i(bufptmp), crc_init # Compute crc32 of 8-byte data i=i+8 .endr - jz do_return # Return if remaining length is zero + jz .Ldo_return # Return if remaining length is zero add $j, bufptmp # Advance buf .endr -less_than_8: # Length should be stored in +.Lless_than_8: # Length should be stored in # upper 3 bits of len_dw shl $1, len_dw -less_than_8_post_shl1: - jnc less_than_4 +.Lless_than_8_post_shl1: + jnc .Lless_than_4 crc32l (bufptmp), crc_init_dw # CRC of 4 bytes - jz do_return # return if remaining data is zero + jz .Ldo_return # return if remaining data is zero add $4, bufptmp -less_than_4: # Length should be stored in +.Lless_than_4: # Length should be stored in # upper 2 bits of len_dw shl $1, len_dw - jnc less_than_2 + jnc .Lless_than_2 crc32w (bufptmp), crc_init_dw # CRC of 2 bytes - jz do_return # return if remaining data is zero + jz .Ldo_return # return if remaining data is zero add $2, bufptmp -less_than_2: # Length should be stored in the MSB +.Lless_than_2: # Length should be stored in the MSB # of len_dw shl $1, len_dw - jnc less_than_1 + jnc .Lless_than_1 crc32b (bufptmp), crc_init_dw # CRC of 1 byte -less_than_1: # Length should be zero -do_return: +.Lless_than_1: # Length should be zero +.Ldo_return: movq crc_init, %rax popq %rsi popq %rdi diff --git a/arch/x86/crypto/des3_ede-asm_64.S b/arch/x86/crypto/des3_ede-asm_64.S index f4c760f4cade..cf21b998e77c 100644 --- a/arch/x86/crypto/des3_ede-asm_64.S +++ b/arch/x86/crypto/des3_ede-asm_64.S @@ -129,21 +129,29 @@ movzbl RW0bl, RT2d; \ movzbl RW0bh, RT3d; \ shrq $16, RW0; \ - movq s8(, RT0, 8), RT0; \ - xorq s6(, RT1, 8), to; \ + leaq s8(%rip), RW1; \ + movq (RW1, RT0, 8), RT0; \ + leaq s6(%rip), RW1; \ + xorq (RW1, RT1, 8), to; \ movzbl RW0bl, RL1d; \ movzbl RW0bh, RT1d; \ shrl $16, RW0d; \ - xorq s4(, RT2, 8), RT0; \ - xorq s2(, RT3, 8), to; \ + leaq s4(%rip), RW1; \ + xorq (RW1, RT2, 8), RT0; \ + leaq s2(%rip), RW1; \ + xorq (RW1, RT3, 8), to; \ movzbl RW0bl, RT2d; \ movzbl RW0bh, RT3d; \ - xorq s7(, RL1, 8), RT0; \ - xorq s5(, RT1, 8), to; \ - xorq s3(, RT2, 8), RT0; \ + leaq s7(%rip), RW1; \ + xorq (RW1, RL1, 8), RT0; \ + leaq s5(%rip), RW1; \ + xorq (RW1, RT1, 8), to; \ + leaq s3(%rip), RW1; \ + xorq (RW1, RT2, 8), RT0; \ load_next_key(n, RW0); \ xorq RT0, to; \ - xorq s1(, RT3, 8), to; \ + leaq s1(%rip), RW1; \ + xorq (RW1, RT3, 8), to; \ #define load_next_key(n, RWx) \ movq (((n) + 1) * 8)(CTX), RWx; @@ -355,65 +363,89 @@ SYM_FUNC_END(des3_ede_x86_64_crypt_blk) movzbl RW0bl, RT3d; \ movzbl RW0bh, RT1d; \ shrq $16, RW0; \ - xorq s8(, RT3, 8), to##0; \ - xorq s6(, RT1, 8), to##0; \ + leaq s8(%rip), RT2; \ + xorq (RT2, RT3, 8), to##0; \ + leaq s6(%rip), RT2; \ + xorq (RT2, RT1, 8), to##0; \ movzbl RW0bl, RT3d; \ movzbl RW0bh, RT1d; \ shrq $16, RW0; \ - xorq s4(, RT3, 8), to##0; \ - xorq s2(, RT1, 8), to##0; \ + leaq s4(%rip), RT2; \ + xorq (RT2, RT3, 8), to##0; \ + leaq s2(%rip), RT2; \ + xorq (RT2, RT1, 8), to##0; \ movzbl RW0bl, RT3d; \ movzbl RW0bh, RT1d; \ shrl $16, RW0d; \ - xorq s7(, RT3, 8), to##0; \ - xorq s5(, RT1, 8), to##0; \ + leaq s7(%rip), RT2; \ + xorq (RT2, RT3, 8), to##0; \ + leaq s5(%rip), RT2; \ + xorq (RT2, RT1, 8), to##0; \ movzbl RW0bl, RT3d; \ movzbl RW0bh, RT1d; \ load_next_key(n, RW0); \ - xorq s3(, RT3, 8), to##0; \ - xorq s1(, RT1, 8), to##0; \ + leaq s3(%rip), RT2; \ + xorq (RT2, RT3, 8), to##0; \ + leaq s1(%rip), RT2; \ + xorq (RT2, RT1, 8), to##0; \ xorq from##1, RW1; \ movzbl RW1bl, RT3d; \ movzbl RW1bh, RT1d; \ shrq $16, RW1; \ - xorq s8(, RT3, 8), to##1; \ - xorq s6(, RT1, 8), to##1; \ + leaq s8(%rip), RT2; \ + xorq (RT2, RT3, 8), to##1; \ + leaq s6(%rip), RT2; \ + xorq (RT2, RT1, 8), to##1; \ movzbl RW1bl, RT3d; \ movzbl RW1bh, RT1d; \ shrq $16, RW1; \ - xorq s4(, RT3, 8), to##1; \ - xorq s2(, RT1, 8), to##1; \ + leaq s4(%rip), RT2; \ + xorq (RT2, RT3, 8), to##1; \ + leaq s2(%rip), RT2; \ + xorq (RT2, RT1, 8), to##1; \ movzbl RW1bl, RT3d; \ movzbl RW1bh, RT1d; \ shrl $16, RW1d; \ - xorq s7(, RT3, 8), to##1; \ - xorq s5(, RT1, 8), to##1; \ + leaq s7(%rip), RT2; \ + xorq (RT2, RT3, 8), to##1; \ + leaq s5(%rip), RT2; \ + xorq (RT2, RT1, 8), to##1; \ movzbl RW1bl, RT3d; \ movzbl RW1bh, RT1d; \ do_movq(RW0, RW1); \ - xorq s3(, RT3, 8), to##1; \ - xorq s1(, RT1, 8), to##1; \ + leaq s3(%rip), RT2; \ + xorq (RT2, RT3, 8), to##1; \ + leaq s1(%rip), RT2; \ + xorq (RT2, RT1, 8), to##1; \ xorq from##2, RW2; \ movzbl RW2bl, RT3d; \ movzbl RW2bh, RT1d; \ shrq $16, RW2; \ - xorq s8(, RT3, 8), to##2; \ - xorq s6(, RT1, 8), to##2; \ + leaq s8(%rip), RT2; \ + xorq (RT2, RT3, 8), to##2; \ + leaq s6(%rip), RT2; \ + xorq (RT2, RT1, 8), to##2; \ movzbl RW2bl, RT3d; \ movzbl RW2bh, RT1d; \ shrq $16, RW2; \ - xorq s4(, RT3, 8), to##2; \ - xorq s2(, RT1, 8), to##2; \ + leaq s4(%rip), RT2; \ + xorq (RT2, RT3, 8), to##2; \ + leaq s2(%rip), RT2; \ + xorq (RT2, RT1, 8), to##2; \ movzbl RW2bl, RT3d; \ movzbl RW2bh, RT1d; \ shrl $16, RW2d; \ - xorq s7(, RT3, 8), to##2; \ - xorq s5(, RT1, 8), to##2; \ + leaq s7(%rip), RT2; \ + xorq (RT2, RT3, 8), to##2; \ + leaq s5(%rip), RT2; \ + xorq (RT2, RT1, 8), to##2; \ movzbl RW2bl, RT3d; \ movzbl RW2bh, RT1d; \ do_movq(RW0, RW2); \ - xorq s3(, RT3, 8), to##2; \ - xorq s1(, RT1, 8), to##2; + leaq s3(%rip), RT2; \ + xorq (RT2, RT3, 8), to##2; \ + leaq s1(%rip), RT2; \ + xorq (RT2, RT1, 8), to##2; #define __movq(src, dst) \ movq src, dst; diff --git a/arch/x86/crypto/ghash-clmulni-intel_asm.S b/arch/x86/crypto/ghash-clmulni-intel_asm.S index 257ed9446f3e..99cb983ded9e 100644 --- a/arch/x86/crypto/ghash-clmulni-intel_asm.S +++ b/arch/x86/crypto/ghash-clmulni-intel_asm.S @@ -93,7 +93,7 @@ SYM_FUNC_START(clmul_ghash_mul) FRAME_BEGIN movups (%rdi), DATA movups (%rsi), SHASH - movaps .Lbswap_mask, BSWAP + movaps .Lbswap_mask(%rip), BSWAP pshufb BSWAP, DATA call __clmul_gf128mul_ble pshufb BSWAP, DATA @@ -110,7 +110,7 @@ SYM_FUNC_START(clmul_ghash_update) FRAME_BEGIN cmp $16, %rdx jb .Lupdate_just_ret # check length - movaps .Lbswap_mask, BSWAP + movaps .Lbswap_mask(%rip), BSWAP movups (%rdi), DATA movups (%rcx), SHASH pshufb BSWAP, DATA diff --git a/arch/x86/crypto/sha1_avx2_x86_64_asm.S b/arch/x86/crypto/sha1_avx2_x86_64_asm.S index a96b2fd26dab..4b49bdc95265 100644 --- a/arch/x86/crypto/sha1_avx2_x86_64_asm.S +++ b/arch/x86/crypto/sha1_avx2_x86_64_asm.S @@ -485,18 +485,18 @@ xchg WK_BUF, PRECALC_BUF .align 32 -_loop: +.L_loop: /* * code loops through more than one block * we use K_BASE value as a signal of a last block, * it is set below by: cmovae BUFFER_PTR, K_BASE */ test BLOCKS_CTR, BLOCKS_CTR - jnz _begin + jnz .L_begin .align 32 - jmp _end + jmp .L_end .align 32 -_begin: +.L_begin: /* * Do first block @@ -508,9 +508,6 @@ _begin: .set j, j+2 .endr - jmp _loop0 -_loop0: - /* * rounds: * 10,12,14,16,18 @@ -545,7 +542,7 @@ _loop0: UPDATE_HASH 16(HASH_PTR), E test BLOCKS_CTR, BLOCKS_CTR - jz _loop + jz .L_loop mov TB, B @@ -562,8 +559,6 @@ _loop0: .set j, j+2 .endr - jmp _loop1 -_loop1: /* * rounds * 20+80,22+80,24+80,26+80,28+80 @@ -574,9 +569,6 @@ _loop1: .set j, j+2 .endr - jmp _loop2 -_loop2: - /* * rounds * 40+80,42+80,44+80,46+80,48+80 @@ -592,9 +584,6 @@ _loop2: /* Move to the next block only if needed*/ ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 4, 128 - jmp _loop3 -_loop3: - /* * rounds * 60+80,62+80,64+80,66+80,68+80 @@ -623,10 +612,10 @@ _loop3: xchg WK_BUF, PRECALC_BUF - jmp _loop + jmp .L_loop .align 32 - _end: +.L_end: .endm /* diff --git a/arch/x86/crypto/sha256-avx-asm.S b/arch/x86/crypto/sha256-avx-asm.S index 5555b5d5215a..53de72bdd851 100644 --- a/arch/x86/crypto/sha256-avx-asm.S +++ b/arch/x86/crypto/sha256-avx-asm.S @@ -360,7 +360,7 @@ SYM_TYPED_FUNC_START(sha256_transform_avx) and $~15, %rsp # align stack pointer shl $6, NUM_BLKS # convert to bytes - jz done_hash + jz .Ldone_hash add INP, NUM_BLKS # pointer to end of data mov NUM_BLKS, _INP_END(%rsp) @@ -377,7 +377,7 @@ SYM_TYPED_FUNC_START(sha256_transform_avx) vmovdqa PSHUFFLE_BYTE_FLIP_MASK(%rip), BYTE_FLIP_MASK vmovdqa _SHUF_00BA(%rip), SHUF_00BA vmovdqa _SHUF_DC00(%rip), SHUF_DC00 -loop0: +.Lloop0: lea K256(%rip), TBL ## byte swap first 16 dwords @@ -391,7 +391,7 @@ loop0: ## schedule 48 input dwords, by doing 3 rounds of 16 each mov $3, SRND .align 16 -loop1: +.Lloop1: vpaddd (TBL), X0, XFER vmovdqa XFER, _XFER(%rsp) FOUR_ROUNDS_AND_SCHED @@ -410,10 +410,10 @@ loop1: FOUR_ROUNDS_AND_SCHED sub $1, SRND - jne loop1 + jne .Lloop1 mov $2, SRND -loop2: +.Lloop2: vpaddd (TBL), X0, XFER vmovdqa XFER, _XFER(%rsp) DO_ROUND 0 @@ -433,7 +433,7 @@ loop2: vmovdqa X3, X1 sub $1, SRND - jne loop2 + jne .Lloop2 addm (4*0)(CTX),a addm (4*1)(CTX),b @@ -447,9 +447,9 @@ loop2: mov _INP(%rsp), INP add $64, INP cmp _INP_END(%rsp), INP - jne loop0 + jne .Lloop0 -done_hash: +.Ldone_hash: mov %rbp, %rsp popq %rbp diff --git a/arch/x86/crypto/sha256-avx2-asm.S b/arch/x86/crypto/sha256-avx2-asm.S index 3eada9416852..9918212faf91 100644 --- a/arch/x86/crypto/sha256-avx2-asm.S +++ b/arch/x86/crypto/sha256-avx2-asm.S @@ -538,12 +538,12 @@ SYM_TYPED_FUNC_START(sha256_transform_rorx) and $-32, %rsp # align rsp to 32 byte boundary shl $6, NUM_BLKS # convert to bytes - jz done_hash + jz .Ldone_hash lea -64(INP, NUM_BLKS), NUM_BLKS # pointer to last block mov NUM_BLKS, _INP_END(%rsp) cmp NUM_BLKS, INP - je only_one_block + je .Lonly_one_block ## load initial digest mov (CTX), a @@ -561,7 +561,7 @@ SYM_TYPED_FUNC_START(sha256_transform_rorx) mov CTX, _CTX(%rsp) -loop0: +.Lloop0: ## Load first 16 dwords from two blocks VMOVDQ 0*32(INP),XTMP0 VMOVDQ 1*32(INP),XTMP1 @@ -580,7 +580,7 @@ loop0: vperm2i128 $0x20, XTMP3, XTMP1, X2 vperm2i128 $0x31, XTMP3, XTMP1, X3 -last_block_enter: +.Llast_block_enter: add $64, INP mov INP, _INP(%rsp) @@ -588,34 +588,40 @@ last_block_enter: xor SRND, SRND .align 16 -loop1: - vpaddd K256+0*32(SRND), X0, XFER +.Lloop1: + leaq K256+0*32(%rip), INP ## reuse INP as scratch reg + vpaddd (INP, SRND), X0, XFER vmovdqa XFER, 0*32+_XFER(%rsp, SRND) FOUR_ROUNDS_AND_SCHED _XFER + 0*32 - vpaddd K256+1*32(SRND), X0, XFER + leaq K256+1*32(%rip), INP + vpaddd (INP, SRND), X0, XFER vmovdqa XFER, 1*32+_XFER(%rsp, SRND) FOUR_ROUNDS_AND_SCHED _XFER + 1*32 - vpaddd K256+2*32(SRND), X0, XFER + leaq K256+2*32(%rip), INP + vpaddd (INP, SRND), X0, XFER vmovdqa XFER, 2*32+_XFER(%rsp, SRND) FOUR_ROUNDS_AND_SCHED _XFER + 2*32 - vpaddd K256+3*32(SRND), X0, XFER + leaq K256+3*32(%rip), INP + vpaddd (INP, SRND), X0, XFER vmovdqa XFER, 3*32+_XFER(%rsp, SRND) FOUR_ROUNDS_AND_SCHED _XFER + 3*32 add $4*32, SRND cmp $3*4*32, SRND - jb loop1 + jb .Lloop1 -loop2: +.Lloop2: ## Do last 16 rounds with no scheduling - vpaddd K256+0*32(SRND), X0, XFER + leaq K256+0*32(%rip), INP + vpaddd (INP, SRND), X0, XFER vmovdqa XFER, 0*32+_XFER(%rsp, SRND) DO_4ROUNDS _XFER + 0*32 - vpaddd K256+1*32(SRND), X1, XFER + leaq K256+1*32(%rip), INP + vpaddd (INP, SRND), X1, XFER vmovdqa XFER, 1*32+_XFER(%rsp, SRND) DO_4ROUNDS _XFER + 1*32 add $2*32, SRND @@ -624,7 +630,7 @@ loop2: vmovdqa X3, X1 cmp $4*4*32, SRND - jb loop2 + jb .Lloop2 mov _CTX(%rsp), CTX mov _INP(%rsp), INP @@ -639,17 +645,17 @@ loop2: addm (4*7)(CTX),h cmp _INP_END(%rsp), INP - ja done_hash + ja .Ldone_hash #### Do second block using previously scheduled results xor SRND, SRND .align 16 -loop3: +.Lloop3: DO_4ROUNDS _XFER + 0*32 + 16 DO_4ROUNDS _XFER + 1*32 + 16 add $2*32, SRND cmp $4*4*32, SRND - jb loop3 + jb .Lloop3 mov _CTX(%rsp), CTX mov _INP(%rsp), INP @@ -665,10 +671,10 @@ loop3: addm (4*7)(CTX),h cmp _INP_END(%rsp), INP - jb loop0 - ja done_hash + jb .Lloop0 + ja .Ldone_hash -do_last_block: +.Ldo_last_block: VMOVDQ 0*16(INP),XWORD0 VMOVDQ 1*16(INP),XWORD1 VMOVDQ 2*16(INP),XWORD2 @@ -679,9 +685,9 @@ do_last_block: vpshufb X_BYTE_FLIP_MASK, XWORD2, XWORD2 vpshufb X_BYTE_FLIP_MASK, XWORD3, XWORD3 - jmp last_block_enter + jmp .Llast_block_enter -only_one_block: +.Lonly_one_block: ## load initial digest mov (4*0)(CTX),a @@ -698,9 +704,9 @@ only_one_block: vmovdqa _SHUF_DC00(%rip), SHUF_DC00 mov CTX, _CTX(%rsp) - jmp do_last_block + jmp .Ldo_last_block -done_hash: +.Ldone_hash: mov %rbp, %rsp pop %rbp diff --git a/arch/x86/crypto/sha256-ssse3-asm.S b/arch/x86/crypto/sha256-ssse3-asm.S index 959288eecc68..93264ee44543 100644 --- a/arch/x86/crypto/sha256-ssse3-asm.S +++ b/arch/x86/crypto/sha256-ssse3-asm.S @@ -369,7 +369,7 @@ SYM_TYPED_FUNC_START(sha256_transform_ssse3) and $~15, %rsp shl $6, NUM_BLKS # convert to bytes - jz done_hash + jz .Ldone_hash add INP, NUM_BLKS mov NUM_BLKS, _INP_END(%rsp) # pointer to end of data @@ -387,7 +387,7 @@ SYM_TYPED_FUNC_START(sha256_transform_ssse3) movdqa _SHUF_00BA(%rip), SHUF_00BA movdqa _SHUF_DC00(%rip), SHUF_DC00 -loop0: +.Lloop0: lea K256(%rip), TBL ## byte swap first 16 dwords @@ -401,7 +401,7 @@ loop0: ## schedule 48 input dwords, by doing 3 rounds of 16 each mov $3, SRND .align 16 -loop1: +.Lloop1: movdqa (TBL), XFER paddd X0, XFER movdqa XFER, _XFER(%rsp) @@ -424,10 +424,10 @@ loop1: FOUR_ROUNDS_AND_SCHED sub $1, SRND - jne loop1 + jne .Lloop1 mov $2, SRND -loop2: +.Lloop2: paddd (TBL), X0 movdqa X0, _XFER(%rsp) DO_ROUND 0 @@ -446,7 +446,7 @@ loop2: movdqa X3, X1 sub $1, SRND - jne loop2 + jne .Lloop2 addm (4*0)(CTX),a addm (4*1)(CTX),b @@ -460,9 +460,9 @@ loop2: mov _INP(%rsp), INP add $64, INP cmp _INP_END(%rsp), INP - jne loop0 + jne .Lloop0 -done_hash: +.Ldone_hash: mov %rbp, %rsp popq %rbp diff --git a/arch/x86/crypto/sha512-avx-asm.S b/arch/x86/crypto/sha512-avx-asm.S index b0984f19fdb4..d902b8ea0721 100644 --- a/arch/x86/crypto/sha512-avx-asm.S +++ b/arch/x86/crypto/sha512-avx-asm.S @@ -276,7 +276,7 @@ frame_size = frame_WK + WK_SIZE ######################################################################## SYM_TYPED_FUNC_START(sha512_transform_avx) test msglen, msglen - je nowork + je .Lnowork # Save GPRs push %rbx @@ -291,7 +291,7 @@ SYM_TYPED_FUNC_START(sha512_transform_avx) sub $frame_size, %rsp and $~(0x20 - 1), %rsp -updateblock: +.Lupdateblock: # Load state variables mov DIGEST(0), a_64 @@ -348,7 +348,7 @@ updateblock: # Advance to next message block add $16*8, msg dec msglen - jnz updateblock + jnz .Lupdateblock # Restore Stack Pointer mov %rbp, %rsp @@ -361,7 +361,7 @@ updateblock: pop %r12 pop %rbx -nowork: +.Lnowork: RET SYM_FUNC_END(sha512_transform_avx) diff --git a/arch/x86/crypto/sha512-avx2-asm.S b/arch/x86/crypto/sha512-avx2-asm.S index b1ca99055ef9..f08496cd6870 100644 --- a/arch/x86/crypto/sha512-avx2-asm.S +++ b/arch/x86/crypto/sha512-avx2-asm.S @@ -581,7 +581,7 @@ SYM_TYPED_FUNC_START(sha512_transform_rorx) and $~(0x20 - 1), %rsp shl $7, NUM_BLKS # convert to bytes - jz done_hash + jz .Ldone_hash add INP, NUM_BLKS # pointer to end of data mov NUM_BLKS, frame_INPEND(%rsp) @@ -600,7 +600,7 @@ SYM_TYPED_FUNC_START(sha512_transform_rorx) vmovdqa PSHUFFLE_BYTE_FLIP_MASK(%rip), BYTE_FLIP_MASK -loop0: +.Lloop0: lea K512(%rip), TBL ## byte swap first 16 dwords @@ -615,7 +615,7 @@ loop0: movq $4, frame_SRND(%rsp) .align 16 -loop1: +.Lloop1: vpaddq (TBL), Y_0, XFER vmovdqa XFER, frame_XFER(%rsp) FOUR_ROUNDS_AND_SCHED @@ -634,10 +634,10 @@ loop1: FOUR_ROUNDS_AND_SCHED subq $1, frame_SRND(%rsp) - jne loop1 + jne .Lloop1 movq $2, frame_SRND(%rsp) -loop2: +.Lloop2: vpaddq (TBL), Y_0, XFER vmovdqa XFER, frame_XFER(%rsp) DO_4ROUNDS @@ -650,7 +650,7 @@ loop2: vmovdqa Y_3, Y_1 subq $1, frame_SRND(%rsp) - jne loop2 + jne .Lloop2 mov frame_CTX(%rsp), CTX2 addm 8*0(CTX2), a @@ -665,9 +665,9 @@ loop2: mov frame_INP(%rsp), INP add $128, INP cmp frame_INPEND(%rsp), INP - jne loop0 + jne .Lloop0 -done_hash: +.Ldone_hash: # Restore Stack Pointer mov %rbp, %rsp diff --git a/arch/x86/crypto/sha512-ssse3-asm.S b/arch/x86/crypto/sha512-ssse3-asm.S index c06afb5270e5..65be30156816 100644 --- a/arch/x86/crypto/sha512-ssse3-asm.S +++ b/arch/x86/crypto/sha512-ssse3-asm.S @@ -278,7 +278,7 @@ frame_size = frame_WK + WK_SIZE SYM_TYPED_FUNC_START(sha512_transform_ssse3) test msglen, msglen - je nowork + je .Lnowork # Save GPRs push %rbx @@ -293,7 +293,7 @@ SYM_TYPED_FUNC_START(sha512_transform_ssse3) sub $frame_size, %rsp and $~(0x20 - 1), %rsp -updateblock: +.Lupdateblock: # Load state variables mov DIGEST(0), a_64 @@ -350,7 +350,7 @@ updateblock: # Advance to next message block add $16*8, msg dec msglen - jnz updateblock + jnz .Lupdateblock # Restore Stack Pointer mov %rbp, %rsp @@ -363,7 +363,7 @@ updateblock: pop %r12 pop %rbx -nowork: +.Lnowork: RET SYM_FUNC_END(sha512_transform_ssse3) diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index eccc3431e515..d94d361f506f 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -8,7 +8,7 @@ * * entry.S contains the system-call and fault low-level handling routines. * - * Some of this is documented in Documentation/x86/entry_64.rst + * Some of this is documented in Documentation/arch/x86/entry_64.rst * * A note on terminology: * - iret frame: Architecture defined interrupt frame from SS to RIP diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile index 1506a22a4fb6..6a1821bd7d5e 100644 --- a/arch/x86/entry/vdso/Makefile +++ b/arch/x86/entry/vdso/Makefile @@ -3,10 +3,7 @@ # Building vDSO images for x86. # -# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before -# the inclusion of generic Makefile. -ARCH_REL_TYPE_ABS := R_X86_64_JUMP_SLOT|R_X86_64_GLOB_DAT|R_X86_64_RELATIVE| -ARCH_REL_TYPE_ABS += R_386_GLOB_DAT|R_386_JMP_SLOT|R_386_RELATIVE +# Include the generic Makefile to check the built vdso. include $(srctree)/lib/vdso/Makefile # Sanitizer runtimes are unavailable and cannot be linked here. diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c index 8c45b198b62f..bccea57dee81 100644 --- a/arch/x86/events/amd/core.c +++ b/arch/x86/events/amd/core.c @@ -923,6 +923,7 @@ static int amd_pmu_v2_handle_irq(struct pt_regs *regs) /* Event overflow */ handled++; + status &= ~mask; perf_sample_data_init(&data, 0, hwc->last_period); if (!x86_perf_event_set_period(event)) @@ -933,8 +934,6 @@ static int amd_pmu_v2_handle_irq(struct pt_regs *regs) if (perf_event_overflow(event, &data, regs)) x86_pmu_stop(event, 0); - - status &= ~mask; } /* diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c index 41ef036ebb7b..edbc67ec1f3e 100644 --- a/arch/x86/hyperv/hv_init.c +++ b/arch/x86/hyperv/hv_init.c @@ -29,7 +29,6 @@ #include <linux/syscore_ops.h> #include <clocksource/hyperv_timer.h> #include <linux/highmem.h> -#include <linux/swiotlb.h> int hyperv_init_cpuhp; u64 hv_current_partition_id = ~0ull; @@ -504,16 +503,6 @@ void __init hyperv_init(void) /* Query the VMs extended capability once, so that it can be cached. */ hv_query_ext_cap(0); -#ifdef CONFIG_SWIOTLB - /* - * Swiotlb bounce buffer needs to be mapped in extra address - * space. Map function doesn't work in the early place and so - * call swiotlb_update_mem_attributes() here. - */ - if (hv_is_isolation_supported()) - swiotlb_update_mem_attributes(); -#endif - return; clean_guest_os_id: diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c index 1dbcbd9da74d..f6a020cb1a24 100644 --- a/arch/x86/hyperv/ivm.c +++ b/arch/x86/hyperv/ivm.c @@ -13,6 +13,8 @@ #include <asm/svm.h> #include <asm/sev.h> #include <asm/io.h> +#include <asm/coco.h> +#include <asm/mem_encrypt.h> #include <asm/mshyperv.h> #include <asm/hypervisor.h> @@ -233,41 +235,6 @@ void hv_ghcb_msr_read(u64 msr, u64 *value) local_irq_restore(flags); } EXPORT_SYMBOL_GPL(hv_ghcb_msr_read); -#endif - -enum hv_isolation_type hv_get_isolation_type(void) -{ - if (!(ms_hyperv.priv_high & HV_ISOLATION)) - return HV_ISOLATION_TYPE_NONE; - return FIELD_GET(HV_ISOLATION_TYPE, ms_hyperv.isolation_config_b); -} -EXPORT_SYMBOL_GPL(hv_get_isolation_type); - -/* - * hv_is_isolation_supported - Check system runs in the Hyper-V - * isolation VM. - */ -bool hv_is_isolation_supported(void) -{ - if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) - return false; - - if (!hypervisor_is_type(X86_HYPER_MS_HYPERV)) - return false; - - return hv_get_isolation_type() != HV_ISOLATION_TYPE_NONE; -} - -DEFINE_STATIC_KEY_FALSE(isolation_type_snp); - -/* - * hv_isolation_type_snp - Check system runs in the AMD SEV-SNP based - * isolation VM. - */ -bool hv_isolation_type_snp(void) -{ - return static_branch_unlikely(&isolation_type_snp); -} /* * hv_mark_gpa_visibility - Set pages visible to host via hvcall. @@ -320,27 +287,25 @@ static int hv_mark_gpa_visibility(u16 count, const u64 pfn[], } /* - * hv_set_mem_host_visibility - Set specified memory visible to host. + * hv_vtom_set_host_visibility - Set specified memory visible to host. * * In Isolation VM, all guest memory is encrypted from host and guest * needs to set memory visible to host via hvcall before sharing memory * with host. This function works as wrap of hv_mark_gpa_visibility() * with memory base and size. */ -int hv_set_mem_host_visibility(unsigned long kbuffer, int pagecount, bool visible) +static bool hv_vtom_set_host_visibility(unsigned long kbuffer, int pagecount, bool enc) { - enum hv_mem_host_visibility visibility = visible ? - VMBUS_PAGE_VISIBLE_READ_WRITE : VMBUS_PAGE_NOT_VISIBLE; + enum hv_mem_host_visibility visibility = enc ? + VMBUS_PAGE_NOT_VISIBLE : VMBUS_PAGE_VISIBLE_READ_WRITE; u64 *pfn_array; int ret = 0; + bool result = true; int i, pfn; - if (!hv_is_isolation_supported() || !hv_hypercall_pg) - return 0; - pfn_array = kmalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL); if (!pfn_array) - return -ENOMEM; + return false; for (i = 0, pfn = 0; i < pagecount; i++) { pfn_array[pfn] = virt_to_hvpfn((void *)kbuffer + i * HV_HYP_PAGE_SIZE); @@ -349,17 +314,68 @@ int hv_set_mem_host_visibility(unsigned long kbuffer, int pagecount, bool visibl if (pfn == HV_MAX_MODIFY_GPA_REP_COUNT || i == pagecount - 1) { ret = hv_mark_gpa_visibility(pfn, pfn_array, visibility); - if (ret) + if (ret) { + result = false; goto err_free_pfn_array; + } pfn = 0; } } err_free_pfn_array: kfree(pfn_array); - return ret; + return result; +} + +static bool hv_vtom_tlb_flush_required(bool private) +{ + return true; } +static bool hv_vtom_cache_flush_required(void) +{ + return false; +} + +static bool hv_is_private_mmio(u64 addr) +{ + /* + * Hyper-V always provides a single IO-APIC in a guest VM. + * When a paravisor is used, it is emulated by the paravisor + * in the guest context and must be mapped private. + */ + if (addr >= HV_IOAPIC_BASE_ADDRESS && + addr < (HV_IOAPIC_BASE_ADDRESS + PAGE_SIZE)) + return true; + + /* Same with a vTPM */ + if (addr >= VTPM_BASE_ADDRESS && + addr < (VTPM_BASE_ADDRESS + PAGE_SIZE)) + return true; + + return false; +} + +void __init hv_vtom_init(void) +{ + /* + * By design, a VM using vTOM doesn't see the SEV setting, + * so SEV initialization is bypassed and sev_status isn't set. + * Set it here to indicate a vTOM VM. + */ + sev_status = MSR_AMD64_SNP_VTOM; + cc_set_vendor(CC_VENDOR_AMD); + cc_set_mask(ms_hyperv.shared_gpa_boundary); + physical_mask &= ms_hyperv.shared_gpa_boundary - 1; + + x86_platform.hyper.is_private_mmio = hv_is_private_mmio; + x86_platform.guest.enc_cache_flush_required = hv_vtom_cache_flush_required; + x86_platform.guest.enc_tlb_flush_required = hv_vtom_tlb_flush_required; + x86_platform.guest.enc_status_change_finish = hv_vtom_set_host_visibility; +} + +#endif /* CONFIG_AMD_MEM_ENCRYPT */ + /* * hv_map_memory - map memory to extra space in the AMD SEV-SNP Isolation VM. */ @@ -377,7 +393,7 @@ void *hv_map_memory(void *addr, unsigned long size) pfns[i] = vmalloc_to_pfn(addr + i * PAGE_SIZE) + (ms_hyperv.shared_gpa_boundary >> PAGE_SHIFT); - vaddr = vmap_pfn(pfns, size / PAGE_SIZE, PAGE_KERNEL_IO); + vaddr = vmap_pfn(pfns, size / PAGE_SIZE, pgprot_decrypted(PAGE_KERNEL)); kfree(pfns); return vaddr; @@ -387,3 +403,37 @@ void hv_unmap_memory(void *addr) { vunmap(addr); } + +enum hv_isolation_type hv_get_isolation_type(void) +{ + if (!(ms_hyperv.priv_high & HV_ISOLATION)) + return HV_ISOLATION_TYPE_NONE; + return FIELD_GET(HV_ISOLATION_TYPE, ms_hyperv.isolation_config_b); +} +EXPORT_SYMBOL_GPL(hv_get_isolation_type); + +/* + * hv_is_isolation_supported - Check system runs in the Hyper-V + * isolation VM. + */ +bool hv_is_isolation_supported(void) +{ + if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) + return false; + + if (!hypervisor_is_type(X86_HYPER_MS_HYPERV)) + return false; + + return hv_get_isolation_type() != HV_ISOLATION_TYPE_NONE; +} + +DEFINE_STATIC_KEY_FALSE(isolation_type_snp); + +/* + * hv_isolation_type_snp - Check system runs in the AMD SEV-SNP based + * isolation VM. + */ +bool hv_isolation_type_snp(void) +{ + return static_branch_unlikely(&isolation_type_snp); +} diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h index e2975a32d443..d7da28fada87 100644 --- a/arch/x86/include/asm/alternative.h +++ b/arch/x86/include/asm/alternative.h @@ -8,7 +8,7 @@ #define ALT_FLAGS_SHIFT 16 -#define ALT_FLAG_NOT BIT(0) +#define ALT_FLAG_NOT (1 << 0) #define ALT_NOT(feature) ((ALT_FLAG_NOT << ALT_FLAGS_SHIFT) | (feature)) #ifndef __ASSEMBLY__ diff --git a/arch/x86/include/asm/bootparam_utils.h b/arch/x86/include/asm/bootparam_utils.h index 53e9b0620d96..d90ae472fb76 100644 --- a/arch/x86/include/asm/bootparam_utils.h +++ b/arch/x86/include/asm/bootparam_utils.h @@ -38,7 +38,7 @@ static void sanitize_boot_params(struct boot_params *boot_params) * IMPORTANT NOTE TO BOOTLOADER AUTHORS: do not simply clear * this field. The purpose of this field is to guarantee * compliance with the x86 boot spec located in - * Documentation/x86/boot.rst . That spec says that the + * Documentation/arch/x86/boot.rst . That spec says that the * *whole* structure should be cleared, after which only the * portion defined by struct setup_header (boot_params->hdr) * should be copied in. diff --git a/arch/x86/include/asm/coco.h b/arch/x86/include/asm/coco.h index 3d98c3a60d34..eb08796002f3 100644 --- a/arch/x86/include/asm/coco.h +++ b/arch/x86/include/asm/coco.h @@ -7,17 +7,33 @@ enum cc_vendor { CC_VENDOR_NONE, CC_VENDOR_AMD, - CC_VENDOR_HYPERV, CC_VENDOR_INTEL, }; -void cc_set_vendor(enum cc_vendor v); -void cc_set_mask(u64 mask); - #ifdef CONFIG_ARCH_HAS_CC_PLATFORM +extern enum cc_vendor cc_vendor; + +static inline enum cc_vendor cc_get_vendor(void) +{ + return cc_vendor; +} + +static inline void cc_set_vendor(enum cc_vendor vendor) +{ + cc_vendor = vendor; +} + +void cc_set_mask(u64 mask); u64 cc_mkenc(u64 val); u64 cc_mkdec(u64 val); #else +static inline enum cc_vendor cc_get_vendor(void) +{ + return CC_VENDOR_NONE; +} + +static inline void cc_set_vendor(enum cc_vendor vendor) { } + static inline u64 cc_mkenc(u64 val) { return val; diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h index cbaf174d8efd..b3af2d45bbbb 100644 --- a/arch/x86/include/asm/intel-family.h +++ b/arch/x86/include/asm/intel-family.h @@ -125,6 +125,8 @@ #define INTEL_FAM6_LUNARLAKE_M 0xBD +#define INTEL_FAM6_ARROWLAKE 0xC6 + /* "Small Core" Processors (Atom/E-Core) */ #define INTEL_FAM6_ATOM_BONNELL 0x1C /* Diamondville, Pineview */ diff --git a/arch/x86/include/asm/mem_encrypt.h b/arch/x86/include/asm/mem_encrypt.h index 72ca90552b6a..b7126701574c 100644 --- a/arch/x86/include/asm/mem_encrypt.h +++ b/arch/x86/include/asm/mem_encrypt.h @@ -56,6 +56,7 @@ void __init sev_es_init_vc_handling(void); #else /* !CONFIG_AMD_MEM_ENCRYPT */ #define sme_me_mask 0ULL +#define sev_status 0ULL static inline void __init sme_early_encrypt(resource_size_t paddr, unsigned long size) { } diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h index e01aa74a6de7..c3ad8a526378 100644 --- a/arch/x86/include/asm/mmu_context.h +++ b/arch/x86/include/asm/mmu_context.h @@ -16,13 +16,6 @@ extern atomic64_t last_mm_ctx_id; -#ifndef CONFIG_PARAVIRT_XXL -static inline void paravirt_activate_mm(struct mm_struct *prev, - struct mm_struct *next) -{ -} -#endif /* !CONFIG_PARAVIRT_XXL */ - #ifdef CONFIG_PERF_EVENTS DECLARE_STATIC_KEY_FALSE(rdpmc_never_available_key); DECLARE_STATIC_KEY_FALSE(rdpmc_always_available_key); @@ -135,7 +128,7 @@ extern void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, #define activate_mm(prev, next) \ do { \ - paravirt_activate_mm((prev), (next)); \ + paravirt_enter_mmap(next); \ switch_mm((prev), (next), NULL); \ } while (0); @@ -168,7 +161,7 @@ static inline void arch_dup_pkeys(struct mm_struct *oldmm, static inline int arch_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm) { arch_dup_pkeys(oldmm, mm); - paravirt_arch_dup_mmap(oldmm, mm); + paravirt_enter_mmap(mm); return ldt_dup_context(oldmm, mm); } diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index 4c4c0ec3b62e..e3cef98a0142 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -11,6 +11,14 @@ #include <asm/paravirt.h> #include <asm/mshyperv.h> +/* + * Hyper-V always provides a single IO-APIC at this MMIO address. + * Ideally, the value should be looked up in ACPI tables, but it + * is needed for mapping the IO-APIC early in boot on Confidential + * VMs, before ACPI functions can be used. + */ +#define HV_IOAPIC_BASE_ADDRESS 0xfec00000 + union hv_ghcb; DECLARE_STATIC_KEY_FALSE(isolation_type_snp); @@ -206,18 +214,19 @@ struct irq_domain *hv_create_pci_msi_domain(void); int hv_map_ioapic_interrupt(int ioapic_id, bool level, int vcpu, int vector, struct hv_interrupt_entry *entry); int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry); -int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible); #ifdef CONFIG_AMD_MEM_ENCRYPT void hv_ghcb_msr_write(u64 msr, u64 value); void hv_ghcb_msr_read(u64 msr, u64 *value); bool hv_ghcb_negotiate_protocol(void); void hv_ghcb_terminate(unsigned int set, unsigned int reason); +void hv_vtom_init(void); #else static inline void hv_ghcb_msr_write(u64 msr, u64 value) {} static inline void hv_ghcb_msr_read(u64 msr, u64 *value) {} static inline bool hv_ghcb_negotiate_protocol(void) { return false; } static inline void hv_ghcb_terminate(unsigned int set, unsigned int reason) {} +static inline void hv_vtom_init(void) {} #endif extern bool hv_isolation_type_snp(void); @@ -259,11 +268,6 @@ static inline void hv_set_register(unsigned int reg, u64 value) { } static inline u64 hv_get_register(unsigned int reg) { return 0; } static inline void hv_set_non_nested_register(unsigned int reg, u64 value) { } static inline u64 hv_get_non_nested_register(unsigned int reg) { return 0; } -static inline int hv_set_mem_host_visibility(unsigned long addr, int numpages, - bool visible) -{ - return -1; -} #endif /* CONFIG_HYPERV */ diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index ad35355ee43e..3aedae61af4f 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -206,6 +206,8 @@ /* Abbreviated from Intel SDM name IA32_INTEGRITY_CAPABILITIES */ #define MSR_INTEGRITY_CAPS 0x000002d9 +#define MSR_INTEGRITY_CAPS_ARRAY_BIST_BIT 2 +#define MSR_INTEGRITY_CAPS_ARRAY_BIST BIT(MSR_INTEGRITY_CAPS_ARRAY_BIST_BIT) #define MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT 4 #define MSR_INTEGRITY_CAPS_PERIODIC_BIST BIT(MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT) diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h index e9e2c3ba5923..06ef25411d62 100644 --- a/arch/x86/include/asm/page_64_types.h +++ b/arch/x86/include/asm/page_64_types.h @@ -49,7 +49,7 @@ #define __START_KERNEL_map _AC(0xffffffff80000000, UL) -/* See Documentation/x86/x86_64/mm.rst for a description of the memory map. */ +/* See Documentation/arch/x86/x86_64/mm.rst for a description of the memory map. */ #define __PHYSICAL_MASK_SHIFT 52 diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index cf40e813b3d7..b49778664d2b 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -334,16 +334,9 @@ static inline void tss_update_io_bitmap(void) } #endif -static inline void paravirt_activate_mm(struct mm_struct *prev, - struct mm_struct *next) +static inline void paravirt_enter_mmap(struct mm_struct *next) { - PVOP_VCALL2(mmu.activate_mm, prev, next); -} - -static inline void paravirt_arch_dup_mmap(struct mm_struct *oldmm, - struct mm_struct *mm) -{ - PVOP_VCALL2(mmu.dup_mmap, oldmm, mm); + PVOP_VCALL1(mmu.enter_mmap, next); } static inline int paravirt_pgd_alloc(struct mm_struct *mm) @@ -789,8 +782,7 @@ extern void default_banner(void); #ifndef __ASSEMBLY__ #ifndef CONFIG_PARAVIRT_XXL -static inline void paravirt_arch_dup_mmap(struct mm_struct *oldmm, - struct mm_struct *mm) +static inline void paravirt_enter_mmap(struct mm_struct *mm) { } #endif diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h index 8c1da419260f..4acbcddddc29 100644 --- a/arch/x86/include/asm/paravirt_types.h +++ b/arch/x86/include/asm/paravirt_types.h @@ -164,11 +164,8 @@ struct pv_mmu_ops { unsigned long (*read_cr3)(void); void (*write_cr3)(unsigned long); - /* Hooks for intercepting the creation/use of an mm_struct. */ - void (*activate_mm)(struct mm_struct *prev, - struct mm_struct *next); - void (*dup_mmap)(struct mm_struct *oldmm, - struct mm_struct *mm); + /* Hook for intercepting the creation/use of an mm_struct. */ + void (*enter_mmap)(struct mm_struct *mm); /* Hooks for allocating and freeing a pagetable top-level */ int (*pgd_alloc)(struct mm_struct *mm); @@ -562,8 +559,14 @@ void paravirt_flush_lazy_mmu(void); void _paravirt_nop(void); void paravirt_BUG(void); -u64 _paravirt_ident_64(u64); unsigned long paravirt_ret0(void); +#ifdef CONFIG_PARAVIRT_XXL +u64 _paravirt_ident_64(u64); +unsigned long pv_native_save_fl(void); +void pv_native_irq_disable(void); +void pv_native_irq_enable(void); +unsigned long pv_native_read_cr2(void); +#endif #define paravirt_nop ((void *)_paravirt_nop) diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h index 38bf837e3554..38b54b992f32 100644 --- a/arch/x86/include/asm/pgtable_64_types.h +++ b/arch/x86/include/asm/pgtable_64_types.h @@ -104,7 +104,7 @@ extern unsigned int ptrs_per_p4d; #define PGDIR_MASK (~(PGDIR_SIZE - 1)) /* - * See Documentation/x86/x86_64/mm.rst for a description of the memory map. + * See Documentation/arch/x86/x86_64/mm.rst for a description of the memory map. * * Be very careful vs. KASLR when changing anything here. The KASLR address * range must not overlap with anything except the KASAN shadow area, which diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 8d73004e4cac..a1e4fa58b357 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -647,7 +647,11 @@ static inline void spin_lock_prefetch(const void *x) #define KSTK_ESP(task) (task_pt_regs(task)->sp) #else -#define INIT_THREAD { } +extern unsigned long __end_init_task[]; + +#define INIT_THREAD { \ + .sp = (unsigned long)&__end_init_task - sizeof(struct pt_regs), \ +} extern unsigned long KSTK_ESP(struct task_struct *task); diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h index a336feef0af1..f6a1737c77be 100644 --- a/arch/x86/include/asm/realmode.h +++ b/arch/x86/include/asm/realmode.h @@ -59,7 +59,6 @@ extern struct real_mode_header *real_mode_header; extern unsigned char real_mode_blob_end[]; extern unsigned long initial_code; -extern unsigned long initial_gs; extern unsigned long initial_stack; #ifdef CONFIG_AMD_MEM_ENCRYPT extern unsigned long initial_vc_handler; diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h index 52788f79786f..255a78d9d906 100644 --- a/arch/x86/include/asm/resctrl.h +++ b/arch/x86/include/asm/resctrl.h @@ -49,7 +49,7 @@ DECLARE_STATIC_KEY_FALSE(rdt_mon_enable_key); * simple as possible. * Must be called with preemption disabled. */ -static void __resctrl_sched_in(void) +static inline void __resctrl_sched_in(struct task_struct *tsk) { struct resctrl_pqr_state *state = this_cpu_ptr(&pqr_state); u32 closid = state->default_closid; @@ -61,13 +61,13 @@ static void __resctrl_sched_in(void) * Else use the closid/rmid assigned to this cpu. */ if (static_branch_likely(&rdt_alloc_enable_key)) { - tmp = READ_ONCE(current->closid); + tmp = READ_ONCE(tsk->closid); if (tmp) closid = tmp; } if (static_branch_likely(&rdt_mon_enable_key)) { - tmp = READ_ONCE(current->rmid); + tmp = READ_ONCE(tsk->rmid); if (tmp) rmid = tmp; } @@ -88,17 +88,17 @@ static inline unsigned int resctrl_arch_round_mon_val(unsigned int val) return val * scale; } -static inline void resctrl_sched_in(void) +static inline void resctrl_sched_in(struct task_struct *tsk) { if (static_branch_likely(&rdt_enable_key)) - __resctrl_sched_in(); + __resctrl_sched_in(tsk); } void resctrl_cpu_detect(struct cpuinfo_x86 *c); #else -static inline void resctrl_sched_in(void) {} +static inline void resctrl_sched_in(struct task_struct *tsk) {} static inline void resctrl_cpu_detect(struct cpuinfo_x86 *c) {} #endif /* CONFIG_X86_CPU_RESCTRL */ diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h index b8357d6ecd47..0759af9b1acf 100644 --- a/arch/x86/include/asm/sev-common.h +++ b/arch/x86/include/asm/sev-common.h @@ -128,9 +128,6 @@ struct snp_psc_desc { struct psc_entry entries[VMGEXIT_PSC_MAX_ENTRY]; } __packed; -/* Guest message request error code */ -#define SNP_GUEST_REQ_INVALID_LEN BIT_ULL(32) - #define GHCB_MSR_TERM_REQ 0x100 #define GHCB_MSR_TERM_REASON_SET_POS 12 #define GHCB_MSR_TERM_REASON_SET_MASK 0xf diff --git a/arch/x86/include/asm/sev.h b/arch/x86/include/asm/sev.h index ebc271bb6d8e..13dc2a9d23c1 100644 --- a/arch/x86/include/asm/sev.h +++ b/arch/x86/include/asm/sev.h @@ -9,6 +9,8 @@ #define __ASM_ENCRYPTED_STATE_H #include <linux/types.h> +#include <linux/sev-guest.h> + #include <asm/insn.h> #include <asm/sev-common.h> #include <asm/bootparam.h> @@ -185,6 +187,9 @@ static inline int pvalidate(unsigned long vaddr, bool rmp_psize, bool validate) return rc; } + +struct snp_guest_request_ioctl; + void setup_ghcb(void); void __init early_snp_set_memory_private(unsigned long vaddr, unsigned long paddr, unsigned int npages); @@ -196,7 +201,7 @@ void snp_set_memory_private(unsigned long vaddr, unsigned int npages); void snp_set_wakeup_secondary_cpu(void); bool snp_init(struct boot_params *bp); void __init __noreturn snp_abort(void); -int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, unsigned long *fw_err); +int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, struct snp_guest_request_ioctl *rio); #else static inline void sev_es_ist_enter(struct pt_regs *regs) { } static inline void sev_es_ist_exit(void) { } @@ -216,8 +221,7 @@ static inline void snp_set_memory_private(unsigned long vaddr, unsigned int npag static inline void snp_set_wakeup_secondary_cpu(void) { } static inline bool snp_init(struct boot_params *bp) { return false; } static inline void snp_abort(void) { } -static inline int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, - unsigned long *fw_err) +static inline int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, struct snp_guest_request_ioctl *rio) { return -ENOTTY; } diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index b4dbb20dab1a..bf2c51df9e0b 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -199,5 +199,8 @@ extern void nmi_selftest(void); #define nmi_selftest() do { } while (0) #endif -#endif /* __ASSEMBLY__ */ +extern unsigned int smpboot_control; + +#endif /* !__ASSEMBLY__ */ + #endif /* _ASM_X86_SMP_H */ diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h index cb1ee53ad3b1..770dcf75eaa9 100644 --- a/arch/x86/include/asm/svm.h +++ b/arch/x86/include/asm/svm.h @@ -261,20 +261,22 @@ enum avic_ipi_failure_cause { AVIC_IPI_FAILURE_INVALID_BACKING_PAGE, }; -#define AVIC_PHYSICAL_MAX_INDEX_MASK GENMASK_ULL(9, 0) +#define AVIC_PHYSICAL_MAX_INDEX_MASK GENMASK_ULL(8, 0) /* - * For AVIC, the max index allowed for physical APIC ID - * table is 0xff (255). + * For AVIC, the max index allowed for physical APIC ID table is 0xfe (254), as + * 0xff is a broadcast to all CPUs, i.e. can't be targeted individually. */ #define AVIC_MAX_PHYSICAL_ID 0XFEULL /* - * For x2AVIC, the max index allowed for physical APIC ID - * table is 0x1ff (511). + * For x2AVIC, the max index allowed for physical APIC ID table is 0x1ff (511). */ #define X2AVIC_MAX_PHYSICAL_ID 0x1FFUL +static_assert((AVIC_MAX_PHYSICAL_ID & AVIC_PHYSICAL_MAX_INDEX_MASK) == AVIC_MAX_PHYSICAL_ID); +static_assert((X2AVIC_MAX_PHYSICAL_ID & AVIC_PHYSICAL_MAX_INDEX_MASK) == X2AVIC_MAX_PHYSICAL_ID); + #define AVIC_HPA_MASK ~((0xFFFULL << 52) | 0xFFF) #define VMCB_AVIC_APIC_BAR_MASK 0xFFFFFFFFFF000ULL diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h index d13d71af5cf6..0a49a8de9f3c 100644 --- a/arch/x86/include/asm/uaccess_64.h +++ b/arch/x86/include/asm/uaccess_64.h @@ -18,32 +18,26 @@ /* Handles exceptions in both to and from, but doesn't do access_ok */ __must_check unsigned long -copy_user_enhanced_fast_string(void *to, const void *from, unsigned len); -__must_check unsigned long -copy_user_generic_string(void *to, const void *from, unsigned len); -__must_check unsigned long -copy_user_generic_unrolled(void *to, const void *from, unsigned len); +rep_movs_alternative(void *to, const void *from, unsigned len); static __always_inline __must_check unsigned long -copy_user_generic(void *to, const void *from, unsigned len) +copy_user_generic(void *to, const void *from, unsigned long len) { - unsigned ret; - + stac(); /* - * If CPU has ERMS feature, use copy_user_enhanced_fast_string. - * Otherwise, if CPU has rep_good feature, use copy_user_generic_string. - * Otherwise, use copy_user_generic_unrolled. + * If CPU has FSRM feature, use 'rep movs'. + * Otherwise, use rep_movs_alternative. */ - alternative_call_2(copy_user_generic_unrolled, - copy_user_generic_string, - X86_FEATURE_REP_GOOD, - copy_user_enhanced_fast_string, - X86_FEATURE_ERMS, - ASM_OUTPUT2("=a" (ret), "=D" (to), "=S" (from), - "=d" (len)), - "1" (to), "2" (from), "3" (len) - : "memory", "rcx", "r8", "r9", "r10", "r11"); - return ret; + asm volatile( + "1:\n\t" + ALTERNATIVE("rep movsb", + "call rep_movs_alternative", ALT_NOT(X86_FEATURE_FSRM)) + "2:\n" + _ASM_EXTABLE_UA(1b, 2b) + :"+c" (len), "+D" (to), "+S" (from), ASM_CALL_CONSTRAINT + : : "memory", "rax", "r8", "r9", "r10", "r11"); + clac(); + return len; } static __always_inline __must_check unsigned long @@ -58,9 +52,7 @@ raw_copy_to_user(void __user *dst, const void *src, unsigned long size) return copy_user_generic((__force void *)dst, src, size); } -extern long __copy_user_nocache(void *dst, const void __user *src, - unsigned size, int zerorest); - +extern long __copy_user_nocache(void *dst, const void __user *src, unsigned size); extern long __copy_user_flushcache(void *dst, const void __user *src, unsigned size); extern void memcpy_page_flushcache(char *to, struct page *page, size_t offset, size_t len); @@ -69,8 +61,12 @@ static inline int __copy_from_user_inatomic_nocache(void *dst, const void __user *src, unsigned size) { + long ret; kasan_check_write(dst, size); - return __copy_user_nocache(dst, src, size, 0); + stac(); + ret = __copy_user_nocache(dst, src, size); + clac(); + return ret; } static inline int @@ -85,11 +81,7 @@ __copy_from_user_flushcache(void *dst, const void __user *src, unsigned size) */ __must_check unsigned long -clear_user_original(void __user *addr, unsigned long len); -__must_check unsigned long -clear_user_rep_good(void __user *addr, unsigned long len); -__must_check unsigned long -clear_user_erms(void __user *addr, unsigned long len); +rep_stos_alternative(void __user *addr, unsigned long len); static __always_inline __must_check unsigned long __clear_user(void __user *addr, unsigned long size) { @@ -102,16 +94,12 @@ static __always_inline __must_check unsigned long __clear_user(void __user *addr */ asm volatile( "1:\n\t" - ALTERNATIVE_3("rep stosb", - "call clear_user_erms", ALT_NOT(X86_FEATURE_FSRM), - "call clear_user_rep_good", ALT_NOT(X86_FEATURE_ERMS), - "call clear_user_original", ALT_NOT(X86_FEATURE_REP_GOOD)) + ALTERNATIVE("rep stosb", + "call rep_stos_alternative", ALT_NOT(X86_FEATURE_FSRS)) "2:\n" _ASM_EXTABLE_UA(1b, 2b) : "+c" (size), "+D" (addr), ASM_CALL_CONSTRAINT - : "a" (0) - /* rep_good clobbers %rdx */ - : "rdx"); + : "a" (0)); clac(); diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index c1c8c581759d..acc20ae4079d 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -259,11 +259,15 @@ struct x86_legacy_features { * VMMCALL under SEV-ES. Needs to return 'false' * if the checks fail. Called from the #VC * exception handler. + * @is_private_mmio: For CoCo VMs, must map MMIO address as private. + * Used when device is emulated by a paravisor + * layer in the VM context. */ struct x86_hyper_runtime { void (*pin_vcpu)(int cpu); void (*sev_es_hcall_prepare)(struct ghcb *ghcb, struct pt_regs *regs); bool (*sev_es_hcall_finish)(struct ghcb *ghcb, struct pt_regs *regs); + bool (*is_private_mmio)(u64 addr); }; /** diff --git a/arch/x86/include/asm/xen/cpuid.h b/arch/x86/include/asm/xen/cpuid.h index 6daa9b0c8d11..a3c29b1496c8 100644 --- a/arch/x86/include/asm/xen/cpuid.h +++ b/arch/x86/include/asm/xen/cpuid.h @@ -89,11 +89,21 @@ * Sub-leaf 2: EAX: host tsc frequency in kHz */ +#define XEN_CPUID_TSC_EMULATED (1u << 0) +#define XEN_CPUID_HOST_TSC_RELIABLE (1u << 1) +#define XEN_CPUID_RDTSCP_INSTR_AVAIL (1u << 2) + +#define XEN_CPUID_TSC_MODE_DEFAULT (0) +#define XEN_CPUID_TSC_MODE_ALWAYS_EMULATE (1u) +#define XEN_CPUID_TSC_MODE_NEVER_EMULATE (2u) +#define XEN_CPUID_TSC_MODE_PVRDTSCP (3u) + /* * Leaf 5 (0x40000x04) * HVM-specific features * Sub-leaf 0: EAX: Features * Sub-leaf 0: EBX: vcpu id (iff EAX has XEN_HVM_CPUID_VCPU_ID_PRESENT flag) + * Sub-leaf 0: ECX: domain id (iff EAX has XEN_HVM_CPUID_DOMID_PRESENT flag) */ #define XEN_HVM_CPUID_APIC_ACCESS_VIRT (1u << 0) /* Virtualized APIC registers */ #define XEN_HVM_CPUID_X2APIC_VIRT (1u << 1) /* Virtualized x2APIC accesses */ @@ -102,12 +112,16 @@ #define XEN_HVM_CPUID_VCPU_ID_PRESENT (1u << 3) /* vcpu id is present in EBX */ #define XEN_HVM_CPUID_DOMID_PRESENT (1u << 4) /* domid is present in ECX */ /* - * Bits 55:49 from the IO-APIC RTE and bits 11:5 from the MSI address can be - * used to store high bits for the Destination ID. This expands the Destination - * ID field from 8 to 15 bits, allowing to target APIC IDs up 32768. + * With interrupt format set to 0 (non-remappable) bits 55:49 from the + * IO-APIC RTE and bits 11:5 from the MSI address can be used to store + * high bits for the Destination ID. This expands the Destination ID + * field from 8 to 15 bits, allowing to target APIC IDs up 32768. */ #define XEN_HVM_CPUID_EXT_DEST_ID (1u << 5) -/* Per-vCPU event channel upcalls */ +/* + * Per-vCPU event channel upcalls work correctly with physical IRQs + * bound to event channels. + */ #define XEN_HVM_CPUID_UPCALL_VECTOR (1u << 6) /* diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 1c38174b5f01..21b542a6866c 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -146,7 +146,11 @@ static int __init acpi_parse_madt(struct acpi_table_header *table) pr_debug("Local APIC address 0x%08x\n", madt->address); } - if (madt->header.revision >= 5) + + /* ACPI 6.3 and newer support the online capable bit. */ + if (acpi_gbl_FADT.header.revision > 6 || + (acpi_gbl_FADT.header.revision == 6 && + acpi_gbl_FADT.minor_revision >= 3)) acpi_support_online_capable = true; default_acpi_madt_oem_check(madt->header.oem_id, @@ -193,7 +197,8 @@ static bool __init acpi_is_processor_usable(u32 lapic_flags) if (lapic_flags & ACPI_MADT_ENABLED) return true; - if (acpi_support_online_capable && (lapic_flags & ACPI_MADT_ONLINE_CAPABLE)) + if (!acpi_support_online_capable || + (lapic_flags & ACPI_MADT_ONLINE_CAPABLE)) return true; return false; @@ -1853,13 +1858,18 @@ early_param("acpi_sci", setup_acpi_sci); int __acpi_acquire_global_lock(unsigned int *lock) { - unsigned int old, new; + unsigned int old, new, val; old = READ_ONCE(*lock); do { - new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1)); + val = (old >> 1) & 0x1; + new = (old & ~0x3) + 2 + val; } while (!try_cmpxchg(lock, &old, new)); - return ((new & 0x3) < 3) ? -1 : 0; + + if (val) + return 0; + + return -1; } int __acpi_release_global_lock(unsigned int *lock) diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 3b7f4cdbf2e0..1328c221af30 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -111,13 +111,26 @@ int x86_acpi_suspend_lowlevel(void) saved_magic = 0x12345678; #else /* CONFIG_64BIT */ #ifdef CONFIG_SMP - initial_stack = (unsigned long)temp_stack + sizeof(temp_stack); - early_gdt_descr.address = - (unsigned long)get_cpu_gdt_rw(smp_processor_id()); - initial_gs = per_cpu_offset(smp_processor_id()); + /* + * As each CPU starts up, it will find its own stack pointer + * from its current_task->thread.sp. Typically that will be + * the idle thread for a newly-started AP, or even the boot + * CPU which will find it set to &init_task in the static + * per-cpu data. + * + * Make the resuming CPU use the temporary stack at startup + * by setting current->thread.sp to point to that. The true + * %rsp will be restored with the rest of the CPU context, + * by do_suspend_lowlevel(). And unwinders don't care about + * the abuse of ->thread.sp because it's a dead variable + * while the thread is running on the CPU anyway; the true + * value is in the actual %rsp register. + */ + current->thread.sp = (unsigned long)temp_stack + sizeof(temp_stack); + smpboot_control = smp_processor_id(); #endif initial_code = (unsigned long)wakeup_long64; - saved_magic = 0x123456789abcdef0L; + saved_magic = 0x123456789abcdef0L; #endif /* CONFIG_64BIT */ /* diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 20d9a604da7c..770557110051 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -422,10 +422,9 @@ static unsigned int reserve_eilvt_offset(int offset, unsigned int new) if (vector && !eilvt_entry_is_changeable(vector, new)) /* may not change if vectors are different */ return rsvd; - rsvd = atomic_cmpxchg(&eilvt_offsets[offset], rsvd, new); - } while (rsvd != new); + } while (!atomic_try_cmpxchg(&eilvt_offsets[offset], &rsvd, new)); - rsvd &= ~APIC_EILVT_MASKED; + rsvd = new & ~APIC_EILVT_MASKED; if (rsvd && rsvd != vector) pr_info("LVT offset %d assigned for vector 0x%02x\n", offset, rsvd); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 1f83b052bb74..4241dc243aa8 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -66,6 +66,7 @@ #include <asm/hw_irq.h> #include <asm/apic.h> #include <asm/pgtable.h> +#include <asm/x86_init.h> #define for_each_ioapic(idx) \ for ((idx) = 0; (idx) < nr_ioapics; (idx)++) @@ -2477,17 +2478,21 @@ static int io_apic_get_redir_entries(int ioapic) unsigned int arch_dynirq_lower_bound(unsigned int from) { + unsigned int ret; + /* * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use * gsi_top if ioapic_dynirq_base hasn't been initialized yet. */ - if (!ioapic_initialized) - return gsi_top; + ret = ioapic_dynirq_base ? : gsi_top; + /* - * For DT enabled machines ioapic_dynirq_base is irrelevant and not - * updated. So simply return @from if ioapic_dynirq_base == 0. + * For DT enabled machines ioapic_dynirq_base is irrelevant and + * always 0. gsi_top can be 0 if there is no IO/APIC registered. + * 0 is an invalid interrupt number for dynamic allocations. Return + * @from instead. */ - return ioapic_dynirq_base ? : from; + return ret ? : from; } #ifdef CONFIG_X86_32 @@ -2680,10 +2685,15 @@ static void io_apic_set_fixmap(enum fixed_addresses idx, phys_addr_t phys) pgprot_t flags = FIXMAP_PAGE_NOCACHE; /* - * Ensure fixmaps for IOAPIC MMIO respect memory encryption pgprot + * Ensure fixmaps for IO-APIC MMIO respect memory encryption pgprot * bits, just like normal ioremap(): */ - flags = pgprot_decrypted(flags); + if (cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT)) { + if (x86_platform.hyper.is_private_mmio(phys)) + flags = pgprot_encrypted(flags); + else + flags = pgprot_decrypted(flags); + } __set_fixmap(idx, phys, flags); } diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c index e696e22d0531..b2b2b7f3e03f 100644 --- a/arch/x86/kernel/apic/x2apic_cluster.c +++ b/arch/x86/kernel/apic/x2apic_cluster.c @@ -9,11 +9,7 @@ #include "local.h" -struct cluster_mask { - unsigned int clusterid; - int node; - struct cpumask mask; -}; +#define apic_cluster(apicid) ((apicid) >> 4) /* * __x2apic_send_IPI_mask() possibly needs to read @@ -23,8 +19,7 @@ struct cluster_mask { static u32 *x86_cpu_to_logical_apicid __read_mostly; static DEFINE_PER_CPU(cpumask_var_t, ipi_mask); -static DEFINE_PER_CPU_READ_MOSTLY(struct cluster_mask *, cluster_masks); -static struct cluster_mask *cluster_hotplug_mask; +static DEFINE_PER_CPU_READ_MOSTLY(struct cpumask *, cluster_masks); static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { @@ -60,10 +55,10 @@ __x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest) /* Collapse cpus in a cluster so a single IPI per cluster is sent */ for_each_cpu(cpu, tmpmsk) { - struct cluster_mask *cmsk = per_cpu(cluster_masks, cpu); + struct cpumask *cmsk = per_cpu(cluster_masks, cpu); dest = 0; - for_each_cpu_and(clustercpu, tmpmsk, &cmsk->mask) + for_each_cpu_and(clustercpu, tmpmsk, cmsk) dest |= x86_cpu_to_logical_apicid[clustercpu]; if (!dest) @@ -71,7 +66,7 @@ __x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest) __x2apic_send_IPI_dest(dest, vector, APIC_DEST_LOGICAL); /* Remove cluster CPUs from tmpmask */ - cpumask_andnot(tmpmsk, tmpmsk, &cmsk->mask); + cpumask_andnot(tmpmsk, tmpmsk, cmsk); } local_irq_restore(flags); @@ -105,55 +100,98 @@ static u32 x2apic_calc_apicid(unsigned int cpu) static void init_x2apic_ldr(void) { - struct cluster_mask *cmsk = this_cpu_read(cluster_masks); - u32 cluster, apicid = apic_read(APIC_LDR); - unsigned int cpu; + struct cpumask *cmsk = this_cpu_read(cluster_masks); - x86_cpu_to_logical_apicid[smp_processor_id()] = apicid; + BUG_ON(!cmsk); - if (cmsk) - goto update; - - cluster = apicid >> 16; - for_each_online_cpu(cpu) { - cmsk = per_cpu(cluster_masks, cpu); - /* Matching cluster found. Link and update it. */ - if (cmsk && cmsk->clusterid == cluster) - goto update; + cpumask_set_cpu(smp_processor_id(), cmsk); +} + +/* + * As an optimisation during boot, set the cluster_mask for all present + * CPUs at once, to prevent each of them having to iterate over the others + * to find the existing cluster_mask. + */ +static void prefill_clustermask(struct cpumask *cmsk, unsigned int cpu, u32 cluster) +{ + int cpu_i; + + for_each_present_cpu(cpu_i) { + struct cpumask **cpu_cmsk = &per_cpu(cluster_masks, cpu_i); + u32 apicid = apic->cpu_present_to_apicid(cpu_i); + + if (apicid == BAD_APICID || cpu_i == cpu || apic_cluster(apicid) != cluster) + continue; + + if (WARN_ON_ONCE(*cpu_cmsk == cmsk)) + continue; + + BUG_ON(*cpu_cmsk); + *cpu_cmsk = cmsk; } - cmsk = cluster_hotplug_mask; - cmsk->clusterid = cluster; - cluster_hotplug_mask = NULL; -update: - this_cpu_write(cluster_masks, cmsk); - cpumask_set_cpu(smp_processor_id(), &cmsk->mask); } -static int alloc_clustermask(unsigned int cpu, int node) +static int alloc_clustermask(unsigned int cpu, u32 cluster, int node) { + struct cpumask *cmsk = NULL; + unsigned int cpu_i; + + /* + * At boot time, the CPU present mask is stable. The cluster mask is + * allocated for the first CPU in the cluster and propagated to all + * present siblings in the cluster. If the cluster mask is already set + * on entry to this function for a given CPU, there is nothing to do. + */ if (per_cpu(cluster_masks, cpu)) return 0; + + if (system_state < SYSTEM_RUNNING) + goto alloc; + /* - * If a hotplug spare mask exists, check whether it's on the right - * node. If not, free it and allocate a new one. + * On post boot hotplug for a CPU which was not present at boot time, + * iterate over all possible CPUs (even those which are not present + * any more) to find any existing cluster mask. */ - if (cluster_hotplug_mask) { - if (cluster_hotplug_mask->node == node) - return 0; - kfree(cluster_hotplug_mask); + for_each_possible_cpu(cpu_i) { + u32 apicid = apic->cpu_present_to_apicid(cpu_i); + + if (apicid != BAD_APICID && apic_cluster(apicid) == cluster) { + cmsk = per_cpu(cluster_masks, cpu_i); + /* + * If the cluster is already initialized, just store + * the mask and return. There's no need to propagate. + */ + if (cmsk) { + per_cpu(cluster_masks, cpu) = cmsk; + return 0; + } + } } - - cluster_hotplug_mask = kzalloc_node(sizeof(*cluster_hotplug_mask), - GFP_KERNEL, node); - if (!cluster_hotplug_mask) + /* + * No CPU in the cluster has ever been initialized, so fall through to + * the boot time code which will also populate the cluster mask for any + * other CPU in the cluster which is (now) present. + */ +alloc: + cmsk = kzalloc_node(sizeof(*cmsk), GFP_KERNEL, node); + if (!cmsk) return -ENOMEM; - cluster_hotplug_mask->node = node; + per_cpu(cluster_masks, cpu) = cmsk; + prefill_clustermask(cmsk, cpu, cluster); + return 0; } static int x2apic_prepare_cpu(unsigned int cpu) { - if (alloc_clustermask(cpu, cpu_to_node(cpu)) < 0) + u32 phys_apicid = apic->cpu_present_to_apicid(cpu); + u32 cluster = apic_cluster(phys_apicid); + u32 logical_apicid = (cluster << 16) | (1 << (phys_apicid & 0xf)); + + x86_cpu_to_logical_apicid[cpu] = logical_apicid; + + if (alloc_clustermask(cpu, cluster, cpu_to_node(cpu)) < 0) return -ENOMEM; if (!zalloc_cpumask_var(&per_cpu(ipi_mask, cpu), GFP_KERNEL)) return -ENOMEM; @@ -162,10 +200,10 @@ static int x2apic_prepare_cpu(unsigned int cpu) static int x2apic_dead_cpu(unsigned int dead_cpu) { - struct cluster_mask *cmsk = per_cpu(cluster_masks, dead_cpu); + struct cpumask *cmsk = per_cpu(cluster_masks, dead_cpu); if (cmsk) - cpumask_clear_cpu(dead_cpu, &cmsk->mask); + cpumask_clear_cpu(dead_cpu, cmsk); free_cpumask_var(per_cpu(ipi_mask, dead_cpu)); return 0; } diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c index 283dcd2f62c8..dc3576303f1a 100644 --- a/arch/x86/kernel/asm-offsets.c +++ b/arch/x86/kernel/asm-offsets.c @@ -115,6 +115,7 @@ static void __used common(void) OFFSET(TSS_sp1, tss_struct, x86_tss.sp1); OFFSET(TSS_sp2, tss_struct, x86_tss.sp2); OFFSET(X86_top_of_stack, pcpu_hot, top_of_stack); + OFFSET(X86_current_task, pcpu_hot, current_task); #ifdef CONFIG_CALL_DEPTH_TRACKING OFFSET(X86_call_depth, pcpu_hot, call_depth); #endif diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 380753b14cab..571abf808ea3 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -880,6 +880,15 @@ void init_spectral_chicken(struct cpuinfo_x86 *c) } } #endif + /* + * Work around Erratum 1386. The XSAVES instruction malfunctions in + * certain circumstances on Zen1/2 uarch, and not all parts have had + * updated microcode at the time of writing (March 2023). + * + * Affected parts all have no supervisor XSAVE states, meaning that + * the XSAVEC instruction (which works fine) is equivalent. + */ + clear_cpu_cap(c, X86_FEATURE_XSAVES); } static void init_amd_zn(struct cpuinfo_x86 *c) @@ -920,6 +929,10 @@ static void init_amd(struct cpuinfo_x86 *c) if (c->x86 >= 0x10) set_cpu_cap(c, X86_FEATURE_REP_GOOD); + /* AMD FSRM also implies FSRS */ + if (cpu_has(c, X86_FEATURE_FSRM)) + set_cpu_cap(c, X86_FEATURE_FSRS); + /* get apicid instead of initial apic id from cpuid */ c->apicid = hard_smp_processor_id(); @@ -996,6 +1009,17 @@ static void init_amd(struct cpuinfo_x86 *c) msr_set_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT); check_null_seg_clears_base(c); + + /* + * Make sure EFER[AIBRSE - Automatic IBRS Enable] is set. The APs are brought up + * using the trampoline code and as part of it, MSR_EFER gets prepared there in + * order to be replicated onto them. Regardless, set it here again, if not set, + * to protect against any future refactoring/code reorganization which might + * miss setting this important bit. + */ + if (spectre_v2_in_eibrs_mode(spectre_v2_enabled) && + cpu_has(c, X86_FEATURE_AUTOIBRS)) + WARN_ON_ONCE(msr_set_bit(MSR_EFER, _EFER_AUTOIBRS)); } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index f9d060e71c3e..182af64387d0 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -784,8 +784,7 @@ static int __init nospectre_v1_cmdline(char *str) } early_param("nospectre_v1", nospectre_v1_cmdline); -static enum spectre_v2_mitigation spectre_v2_enabled __ro_after_init = - SPECTRE_V2_NONE; +enum spectre_v2_mitigation spectre_v2_enabled __ro_after_init = SPECTRE_V2_NONE; #undef pr_fmt #define pr_fmt(fmt) "RETBleed: " fmt @@ -1133,13 +1132,6 @@ spectre_v2_parse_user_cmdline(void) return SPECTRE_V2_USER_CMD_AUTO; } -static inline bool spectre_v2_in_eibrs_mode(enum spectre_v2_mitigation mode) -{ - return mode == SPECTRE_V2_EIBRS || - mode == SPECTRE_V2_EIBRS_RETPOLINE || - mode == SPECTRE_V2_EIBRS_LFENCE; -} - static inline bool spectre_v2_in_ibrs_mode(enum spectre_v2_mitigation mode) { return spectre_v2_in_eibrs_mode(mode) || mode == SPECTRE_V2_IBRS; diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 8cd4126d8253..80710a68ef7d 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -121,6 +121,7 @@ static const struct x86_cpu_id ppin_cpuids[] = { X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, &ppin_info[X86_VENDOR_INTEL]), X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, &ppin_info[X86_VENDOR_INTEL]), X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, &ppin_info[X86_VENDOR_INTEL]), + X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X, &ppin_info[X86_VENDOR_INTEL]), X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL, &ppin_info[X86_VENDOR_INTEL]), X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM, &ppin_info[X86_VENDOR_INTEL]), diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 57a5349e6954..f97b0fe13da8 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -83,4 +83,12 @@ unsigned int aperfmperf_get_khz(int cpu); extern void x86_spec_ctrl_setup_ap(void); extern void update_srbds_msr(void); +extern enum spectre_v2_mitigation spectre_v2_enabled; + +static inline bool spectre_v2_in_eibrs_mode(enum spectre_v2_mitigation mode) +{ + return mode == SPECTRE_V2_EIBRS || + mode == SPECTRE_V2_EIBRS_RETPOLINE || + mode == SPECTRE_V2_EIBRS_LFENCE; +} #endif /* ARCH_X86_CPU_H */ diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 291d4167fab8..1c648b09e053 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -1451,31 +1451,13 @@ void handle_bus_lock(struct pt_regs *regs) } /* - * Bits in the IA32_CORE_CAPABILITIES are not architectural, so they should - * only be trusted if it is confirmed that a CPU model implements a - * specific feature at a particular bit position. - * - * The possible driver data field values: - * - * - 0: CPU models that are known to have the per-core split-lock detection - * feature even though they do not enumerate IA32_CORE_CAPABILITIES. - * - * - 1: CPU models which may enumerate IA32_CORE_CAPABILITIES and if so use - * bit 5 to enumerate the per-core split-lock detection feature. + * CPU models that are known to have the per-core split-lock detection + * feature even though they do not enumerate IA32_CORE_CAPABILITIES. */ static const struct x86_cpu_id split_lock_cpu_ids[] __initconst = { - X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, 0), - X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, 0), - X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, 0), - X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT, 1), - X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D, 1), - X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L, 1), - X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L, 1), - X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE, 1), - X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, 1), - X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE, 1), - X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, 1), - X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE, 1), + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, 0), + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, 0), + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, 0), {} }; @@ -1487,24 +1469,27 @@ static void __init split_lock_setup(struct cpuinfo_x86 *c) if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) return; + /* Check for CPUs that have support but do not enumerate it: */ m = x86_match_cpu(split_lock_cpu_ids); - if (!m) - return; + if (m) + goto supported; - switch (m->driver_data) { - case 0: - break; - case 1: - if (!cpu_has(c, X86_FEATURE_CORE_CAPABILITIES)) - return; - rdmsrl(MSR_IA32_CORE_CAPS, ia32_core_caps); - if (!(ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT)) - return; - break; - default: + if (!cpu_has(c, X86_FEATURE_CORE_CAPABILITIES)) return; - } + /* + * Not all bits in MSR_IA32_CORE_CAPS are architectural, but + * MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT is. All CPUs that set + * it have split lock detection. + */ + rdmsrl(MSR_IA32_CORE_CAPS, ia32_core_caps); + if (ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT) + goto supported; + + /* CPU is not in the model list and does not have the MSR bit: */ + return; + +supported: cpu_model_supports_sld = true; __split_lock_setup(); } diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c index 23c5072fbbb7..0b971f974096 100644 --- a/arch/x86/kernel/cpu/mce/amd.c +++ b/arch/x86/kernel/cpu/mce/amd.c @@ -235,10 +235,10 @@ static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks); * A list of the banks enabled on each logical CPU. Controls which respective * descriptors to initialize later in mce_threshold_create_device(). */ -static DEFINE_PER_CPU(unsigned int, bank_map); +static DEFINE_PER_CPU(u64, bank_map); /* Map of banks that have more than MCA_MISC0 available. */ -static DEFINE_PER_CPU(u32, smca_misc_banks_map); +static DEFINE_PER_CPU(u64, smca_misc_banks_map); static void amd_threshold_interrupt(void); static void amd_deferred_error_interrupt(void); @@ -267,7 +267,7 @@ static void smca_set_misc_banks_map(unsigned int bank, unsigned int cpu) return; if (low & MASK_BLKPTR_LO) - per_cpu(smca_misc_banks_map, cpu) |= BIT(bank); + per_cpu(smca_misc_banks_map, cpu) |= BIT_ULL(bank); } @@ -530,7 +530,7 @@ static u32 smca_get_block_address(unsigned int bank, unsigned int block, if (!block) return MSR_AMD64_SMCA_MCx_MISC(bank); - if (!(per_cpu(smca_misc_banks_map, cpu) & BIT(bank))) + if (!(per_cpu(smca_misc_banks_map, cpu) & BIT_ULL(bank))) return 0; return MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1); @@ -574,7 +574,7 @@ prepare_threshold_block(unsigned int bank, unsigned int block, u32 addr, int new; if (!block) - per_cpu(bank_map, cpu) |= (1 << bank); + per_cpu(bank_map, cpu) |= BIT_ULL(bank); memset(&b, 0, sizeof(b)); b.cpu = cpu; @@ -878,7 +878,7 @@ static void amd_threshold_interrupt(void) return; for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank) { - if (!(per_cpu(bank_map, cpu) & (1 << bank))) + if (!(per_cpu(bank_map, cpu) & BIT_ULL(bank))) continue; first_block = bp[bank]->blocks; @@ -1029,7 +1029,7 @@ static const struct sysfs_ops threshold_ops = { static void threshold_block_release(struct kobject *kobj); -static struct kobj_type threshold_ktype = { +static const struct kobj_type threshold_ktype = { .sysfs_ops = &threshold_ops, .default_groups = default_groups, .release = threshold_block_release, @@ -1356,7 +1356,7 @@ int mce_threshold_create_device(unsigned int cpu) return -ENOMEM; for (bank = 0; bank < numbanks; ++bank) { - if (!(this_cpu_read(bank_map) & (1 << bank))) + if (!(this_cpu_read(bank_map) & BIT_ULL(bank))) continue; err = threshold_create_bank(bp, cpu, bank); if (err) { diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c index 7832a69d170e..2eec60f50057 100644 --- a/arch/x86/kernel/cpu/mce/core.c +++ b/arch/x86/kernel/cpu/mce/core.c @@ -2355,6 +2355,7 @@ static void mce_restart(void) { mce_timer_delete_all(); on_each_cpu(mce_cpu_restart, NULL, 1); + mce_schedule_work(); } /* Toggle features for corrected errors */ diff --git a/arch/x86/kernel/cpu/mce/internal.h b/arch/x86/kernel/cpu/mce/internal.h index 91a415553c27..d2412ce2d312 100644 --- a/arch/x86/kernel/cpu/mce/internal.h +++ b/arch/x86/kernel/cpu/mce/internal.h @@ -244,11 +244,11 @@ noinstr void pentium_machine_check(struct pt_regs *regs); noinstr void winchip_machine_check(struct pt_regs *regs); static inline void enable_p5_mce(void) { mce_p5_enabled = 1; } #else -static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {} -static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {} -static inline void enable_p5_mce(void) {} -static inline void pentium_machine_check(struct pt_regs *regs) {} -static inline void winchip_machine_check(struct pt_regs *regs) {} +static __always_inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {} +static __always_inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {} +static __always_inline void enable_p5_mce(void) {} +static __always_inline void pentium_machine_check(struct pt_regs *regs) {} +static __always_inline void winchip_machine_check(struct pt_regs *regs) {} #endif noinstr u64 mce_rdmsrl(u32 msr); diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c index 9eb457b10341..f5fdeb1e3606 100644 --- a/arch/x86/kernel/cpu/microcode/amd.c +++ b/arch/x86/kernel/cpu/microcode/amd.c @@ -61,7 +61,7 @@ static u8 amd_ucode_patch[MAX_NUMNODES][PATCH_MAX_SIZE]; /* * Microcode patch container file is prepended to the initrd in cpio - * format. See Documentation/x86/microcode.rst + * format. See Documentation/arch/x86/microcode.rst */ static const char ucode_path[] __maybe_unused = "kernel/x86/microcode/AuthenticAMD.bin"; diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index f36dc2f796c5..315fc358e584 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -33,7 +33,6 @@ #include <asm/nmi.h> #include <clocksource/hyperv_timer.h> #include <asm/numa.h> -#include <asm/coco.h> /* Is Linux running as the root partition? */ bool hv_root_partition; @@ -358,12 +357,16 @@ static void __init ms_hyperv_init_platform(void) * To mirror what Windows does we should extract CPU management * features and use the ReservedIdentityBit to detect if Linux is the * root partition. But that requires negotiating CPU management - * interface (a process to be finalized). + * interface (a process to be finalized). For now, use the privilege + * flag as the indicator for running as root. * - * For now, use the privilege flag as the indicator for running as - * root. + * Hyper-V should never specify running as root and as a Confidential + * VM. But to protect against a compromised/malicious Hyper-V trying + * to exploit root behavior to expose Confidential VM memory, ignore + * the root partition setting if also a Confidential VM. */ - if (cpuid_ebx(HYPERV_CPUID_FEATURES) & HV_CPU_MANAGEMENT) { + if ((ms_hyperv.priv_high & HV_CPU_MANAGEMENT) && + !(ms_hyperv.priv_high & HV_ISOLATION)) { hv_root_partition = true; pr_info("Hyper-V: running as root partition\n"); } @@ -397,8 +400,10 @@ static void __init ms_hyperv_init_platform(void) if (ms_hyperv.priv_high & HV_ISOLATION) { ms_hyperv.isolation_config_a = cpuid_eax(HYPERV_CPUID_ISOLATION_CONFIG); ms_hyperv.isolation_config_b = cpuid_ebx(HYPERV_CPUID_ISOLATION_CONFIG); - ms_hyperv.shared_gpa_boundary = - BIT_ULL(ms_hyperv.shared_gpa_boundary_bits); + + if (ms_hyperv.shared_gpa_boundary_active) + ms_hyperv.shared_gpa_boundary = + BIT_ULL(ms_hyperv.shared_gpa_boundary_bits); pr_info("Hyper-V: Isolation Config: Group A 0x%x, Group B 0x%x\n", ms_hyperv.isolation_config_a, ms_hyperv.isolation_config_b); @@ -409,11 +414,6 @@ static void __init ms_hyperv_init_platform(void) swiotlb_unencrypted_base = ms_hyperv.shared_gpa_boundary; #endif } - /* Isolation VMs are unenlightened SEV-based VMs, thus this check: */ - if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) { - if (hv_get_isolation_type() != HV_ISOLATION_TYPE_NONE) - cc_set_vendor(CC_VENDOR_HYPERV); - } } if (hv_max_functions_eax >= HYPERV_CPUID_NESTED_FEATURES) { @@ -482,6 +482,9 @@ static void __init ms_hyperv_init_platform(void) i8253_clear_counter_on_shutdown = false; #if IS_ENABLED(CONFIG_HYPERV) + if ((hv_get_isolation_type() == HV_ISOLATION_TYPE_VBS) || + (hv_get_isolation_type() == HV_ISOLATION_TYPE_SNP)) + hv_vtom_init(); /* * Setup the hook to get control post apic initialization. */ diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c index eb07d4435391..b44c487727d4 100644 --- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c +++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c @@ -368,7 +368,6 @@ ssize_t rdtgroup_schemata_write(struct kernfs_open_file *of, { struct resctrl_schema *s; struct rdtgroup *rdtgrp; - struct rdt_domain *dom; struct rdt_resource *r; char *tok, *resname; int ret = 0; @@ -397,10 +396,7 @@ ssize_t rdtgroup_schemata_write(struct kernfs_open_file *of, goto out; } - list_for_each_entry(s, &resctrl_schema_all, list) { - list_for_each_entry(dom, &s->res->domains, list) - memset(dom->staged_config, 0, sizeof(dom->staged_config)); - } + rdt_staged_configs_clear(); while ((tok = strsep(&buf, "\n")) != NULL) { resname = strim(strsep(&tok, ":")); @@ -445,6 +441,7 @@ ssize_t rdtgroup_schemata_write(struct kernfs_open_file *of, } out: + rdt_staged_configs_clear(); rdtgroup_kn_unlock(of->kn); cpus_read_unlock(); return ret ?: nbytes; diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h index 8edecc5763d8..85ceaf9a31ac 100644 --- a/arch/x86/kernel/cpu/resctrl/internal.h +++ b/arch/x86/kernel/cpu/resctrl/internal.h @@ -555,5 +555,6 @@ void __check_limbo(struct rdt_domain *d, bool force_free); void rdt_domain_reconfigure_cdp(struct rdt_resource *r); void __init thread_throttle_mode_init(void); void __init mbm_config_rftype_init(const char *config); +void rdt_staged_configs_clear(void); #endif /* _ASM_X86_RESCTRL_INTERNAL_H */ diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c index 7fe51488e136..0e7b6afe2fa6 100644 --- a/arch/x86/kernel/cpu/resctrl/monitor.c +++ b/arch/x86/kernel/cpu/resctrl/monitor.c @@ -76,7 +76,7 @@ unsigned int resctrl_rmid_realloc_limit; #define CF(cf) ((unsigned long)(1048576 * (cf) + 0.5)) /* - * The correction factor table is documented in Documentation/x86/resctrl.rst. + * The correction factor table is documented in Documentation/arch/x86/resctrl.rst. * If rmid > rmid threshold, MBM total and local values should be multiplied * by the correction factor. * diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c index e2c1599d1b37..6ad33f355861 100644 --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c @@ -78,6 +78,19 @@ void rdt_last_cmd_printf(const char *fmt, ...) va_end(ap); } +void rdt_staged_configs_clear(void) +{ + struct rdt_resource *r; + struct rdt_domain *dom; + + lockdep_assert_held(&rdtgroup_mutex); + + for_each_alloc_capable_rdt_resource(r) { + list_for_each_entry(dom, &r->domains, list) + memset(dom->staged_config, 0, sizeof(dom->staged_config)); + } +} + /* * Trivial allocator for CLOSIDs. Since h/w only supports a small number, * we can keep a bitmap of free CLOSIDs in a single integer. @@ -314,7 +327,7 @@ static void update_cpu_closid_rmid(void *info) * executing task might have its own closid selected. Just reuse * the context switch code. */ - resctrl_sched_in(); + resctrl_sched_in(current); } /* @@ -530,7 +543,7 @@ static void _update_task_closid_rmid(void *task) * Otherwise, the MSR is updated when the task is scheduled in. */ if (task == current) - resctrl_sched_in(); + resctrl_sched_in(task); } static void update_task_closid_rmid(struct task_struct *t) @@ -3107,7 +3120,9 @@ static int rdtgroup_init_alloc(struct rdtgroup *rdtgrp) { struct resctrl_schema *s; struct rdt_resource *r; - int ret; + int ret = 0; + + rdt_staged_configs_clear(); list_for_each_entry(s, &resctrl_schema_all, list) { r = s->res; @@ -3119,20 +3134,22 @@ static int rdtgroup_init_alloc(struct rdtgroup *rdtgrp) } else { ret = rdtgroup_init_cat(s, rdtgrp->closid); if (ret < 0) - return ret; + goto out; } ret = resctrl_arch_update_domains(r, rdtgrp->closid); if (ret < 0) { rdt_last_cmd_puts("Failed to initialize allocations\n"); - return ret; + goto out; } } rdtgrp->mode = RDT_MODE_SHAREABLE; - return 0; +out: + rdt_staged_configs_clear(); + return ret; } static int mkdir_rdt_prepare(struct kernfs_node *parent_kn, diff --git a/arch/x86/kernel/cpu/sgx/main.c b/arch/x86/kernel/cpu/sgx/main.c index e5a37b6e9aa5..166692f2d501 100644 --- a/arch/x86/kernel/cpu/sgx/main.c +++ b/arch/x86/kernel/cpu/sgx/main.c @@ -892,20 +892,19 @@ static struct miscdevice sgx_dev_provision = { int sgx_set_attribute(unsigned long *allowed_attributes, unsigned int attribute_fd) { - struct file *file; + struct fd f = fdget(attribute_fd); - file = fget(attribute_fd); - if (!file) + if (!f.file) return -EINVAL; - if (file->f_op != &sgx_provision_fops) { - fput(file); + if (f.file->f_op != &sgx_provision_fops) { + fdput(f); return -EINVAL; } *allowed_attributes |= SGX_ATTR_PROVISIONKEY; - fput(file); + fdput(f); return 0; } EXPORT_SYMBOL_GPL(sgx_set_attribute); diff --git a/arch/x86/kernel/cpu/sgx/sgx.h b/arch/x86/kernel/cpu/sgx/sgx.h index 0f2020653fba..d2dad21259a8 100644 --- a/arch/x86/kernel/cpu/sgx/sgx.h +++ b/arch/x86/kernel/cpu/sgx/sgx.h @@ -15,7 +15,7 @@ #define EREMOVE_ERROR_MESSAGE \ "EREMOVE returned %d (0x%x) and an EPC page was leaked. SGX may become unusable. " \ - "Refer to Documentation/x86/sgx.rst for more information." + "Refer to Documentation/arch/x86/sgx.rst for more information." #define SGX_MAX_EPC_SECTIONS 8 #define SGX_EEXTEND_BLOCK_SIZE 256 diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c index 714166cc25f2..0bab497c9436 100644 --- a/arch/x86/kernel/fpu/xstate.c +++ b/arch/x86/kernel/fpu/xstate.c @@ -1118,21 +1118,20 @@ void __copy_xstate_to_uabi_buf(struct membuf to, struct fpstate *fpstate, zerofrom = offsetof(struct xregs_state, extended_state_area); /* - * The ptrace buffer is in non-compacted XSAVE format. In - * non-compacted format disabled features still occupy state space, - * but there is no state to copy from in the compacted - * init_fpstate. The gap tracking will zero these states. - */ - mask = fpstate->user_xfeatures; - - /* - * Dynamic features are not present in init_fpstate. When they are - * in an all zeros init state, remove those from 'mask' to zero - * those features in the user buffer instead of retrieving them - * from init_fpstate. + * This 'mask' indicates which states to copy from fpstate. + * Those extended states that are not present in fpstate are + * either disabled or initialized: + * + * In non-compacted format, disabled features still occupy + * state space but there is no state to copy from in the + * compacted init_fpstate. The gap tracking will zero these + * states. + * + * The extended features have an all zeroes init state. Thus, + * remove them from 'mask' to zero those features in the user + * buffer instead of retrieving them from init_fpstate. */ - if (fpu_state_size_dynamic()) - mask &= (header.xfeatures | xinit->header.xcomp_bv); + mask = header.xfeatures; for_each_extended_xfeature(i, mask) { /* @@ -1151,9 +1150,8 @@ void __copy_xstate_to_uabi_buf(struct membuf to, struct fpstate *fpstate, pkru.pkru = pkru_val; membuf_write(&to, &pkru, sizeof(pkru)); } else { - copy_feature(header.xfeatures & BIT_ULL(i), &to, + membuf_write(&to, __raw_xsave_addr(xsave, i), - __raw_xsave_addr(xinit, i), xstate_sizes[i]); } /* diff --git a/arch/x86/kernel/ftrace_32.S b/arch/x86/kernel/ftrace_32.S index a0ed0e4a2c0c..0d9a14528176 100644 --- a/arch/x86/kernel/ftrace_32.S +++ b/arch/x86/kernel/ftrace_32.S @@ -163,6 +163,11 @@ SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL) jmp .Lftrace_ret SYM_CODE_END(ftrace_regs_caller) +SYM_FUNC_START(ftrace_stub_direct_tramp) + CALL_DEPTH_ACCOUNT + RET +SYM_FUNC_END(ftrace_stub_direct_tramp) + #ifdef CONFIG_FUNCTION_GRAPH_TRACER SYM_CODE_START(ftrace_graph_caller) pushl %eax diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S index 1265ad519249..970d8445fdc4 100644 --- a/arch/x86/kernel/ftrace_64.S +++ b/arch/x86/kernel/ftrace_64.S @@ -136,10 +136,12 @@ SYM_TYPED_FUNC_START(ftrace_stub) RET SYM_FUNC_END(ftrace_stub) +#ifdef CONFIG_FUNCTION_GRAPH_TRACER SYM_TYPED_FUNC_START(ftrace_stub_graph) CALL_DEPTH_ACCOUNT RET SYM_FUNC_END(ftrace_stub_graph) +#endif #ifdef CONFIG_DYNAMIC_FTRACE @@ -307,6 +309,10 @@ SYM_INNER_LABEL(ftrace_regs_caller_end, SYM_L_GLOBAL) SYM_FUNC_END(ftrace_regs_caller) STACK_FRAME_NON_STANDARD_FP(ftrace_regs_caller) +SYM_FUNC_START(ftrace_stub_direct_tramp) + CALL_DEPTH_ACCOUNT + RET +SYM_FUNC_END(ftrace_stub_direct_tramp) #else /* ! CONFIG_DYNAMIC_FTRACE */ diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 222efd4a09bc..6a8238702eab 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -61,23 +61,15 @@ SYM_CODE_START_NOALIGN(startup_64) * tables and then reload them. */ - /* Set up the stack for verify_cpu(), similar to initial_stack below */ - leaq (__end_init_task - FRAME_SIZE)(%rip), %rsp + /* Set up the stack for verify_cpu() */ + leaq (__end_init_task - PTREGS_SIZE)(%rip), %rsp leaq _text(%rip), %rdi - /* - * initial_gs points to initial fixed_percpu_data struct with storage for - * the stack protector canary. Global pointer fixups are needed at this - * stage, so apply them as is done in fixup_pointer(), and initialize %gs - * such that the canary can be accessed at %gs:40 for subsequent C calls. - */ + /* Setup GSBASE to allow stack canary access for C code */ movl $MSR_GS_BASE, %ecx - movq initial_gs(%rip), %rax - movq $_text, %rdx - subq %rdx, %rax - addq %rdi, %rax - movq %rax, %rdx + leaq INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx + movl %edx, %eax shrq $32, %rdx wrmsr @@ -241,13 +233,36 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) UNWIND_HINT_EMPTY ANNOTATE_NOENDBR // above +#ifdef CONFIG_SMP + movl smpboot_control(%rip), %ecx + + /* Get the per cpu offset for the given CPU# which is in ECX */ + movq __per_cpu_offset(,%rcx,8), %rdx +#else + xorl %edx, %edx /* zero-extended to clear all of RDX */ +#endif /* CONFIG_SMP */ + + /* + * Setup a boot time stack - Any secondary CPU will have lost its stack + * by now because the cr3-switch above unmaps the real-mode stack. + * + * RDX contains the per-cpu offset + */ + movq pcpu_hot + X86_current_task(%rdx), %rax + movq TASK_threadsp(%rax), %rsp + /* * We must switch to a new descriptor in kernel space for the GDT * because soon the kernel won't have access anymore to the userspace * addresses where we're currently running on. We have to do that here * because in 32bit we couldn't load a 64bit linear address. */ - lgdt early_gdt_descr(%rip) + subq $16, %rsp + movw $(GDT_SIZE-1), (%rsp) + leaq gdt_page(%rdx), %rax + movq %rax, 2(%rsp) + lgdt (%rsp) + addq $16, %rsp /* set up data segments */ xorl %eax,%eax @@ -271,16 +286,13 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) * the per cpu areas are set up. */ movl $MSR_GS_BASE,%ecx - movl initial_gs(%rip),%eax - movl initial_gs+4(%rip),%edx +#ifndef CONFIG_SMP + leaq INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx +#endif + movl %edx, %eax + shrq $32, %rdx wrmsr - /* - * Setup a boot time stack - Any secondary CPU will have lost its stack - * by now because the cr3-switch above unmaps the real-mode stack - */ - movq initial_stack(%rip), %rsp - /* Setup and Load IDT */ pushq %rsi call early_setup_idt @@ -372,7 +384,11 @@ SYM_CODE_END(secondary_startup_64) SYM_CODE_START(start_cpu0) ANNOTATE_NOENDBR UNWIND_HINT_EMPTY - movq initial_stack(%rip), %rsp + + /* Find the idle task stack */ + movq PER_CPU_VAR(pcpu_hot) + X86_current_task, %rcx + movq TASK_threadsp(%rcx), %rsp + jmp .Ljump_to_C_code SYM_CODE_END(start_cpu0) #endif @@ -416,16 +432,9 @@ SYM_CODE_END(vc_boot_ghcb) __REFDATA .balign 8 SYM_DATA(initial_code, .quad x86_64_start_kernel) -SYM_DATA(initial_gs, .quad INIT_PER_CPU_VAR(fixed_percpu_data)) #ifdef CONFIG_AMD_MEM_ENCRYPT SYM_DATA(initial_vc_handler, .quad handle_vc_boot_ghcb) #endif - -/* - * The FRAME_SIZE gap is a convention which helps the in-kernel unwinder - * reliably detect the end of the stack. - */ -SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - FRAME_SIZE) __FINITDATA __INIT @@ -657,8 +666,7 @@ SYM_DATA_END(level1_fixmap_pgt) .data .align 16 -SYM_DATA(early_gdt_descr, .word GDT_ENTRIES*8-1) -SYM_DATA_LOCAL(early_gdt_descr_base, .quad INIT_PER_CPU_VAR(gdt_page)) +SYM_DATA(smpboot_control, .long 0) .align 16 /* This must match the first entry in level2_kernel_pgt */ diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c index 6b58610a1552..a61c12c01270 100644 --- a/arch/x86/kernel/kexec-bzimage64.c +++ b/arch/x86/kernel/kexec-bzimage64.c @@ -476,7 +476,7 @@ static void *bzImage64_load(struct kimage *image, char *kernel, efi_map_offset = params_cmdline_sz; efi_setup_data_offset = efi_map_offset + ALIGN(efi_map_sz, 16); - /* Copy setup header onto bootparams. Documentation/x86/boot.rst */ + /* Copy setup header onto bootparams. Documentation/arch/x86/boot.rst */ setup_header_size = 0x0202 + kernel[0x0201] - setup_hdr_offset; /* Is there a limit on setup header size? */ diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 42e182868873..ac10b46c5832 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -64,11 +64,11 @@ static unsigned paravirt_patch_call(void *insn_buff, const void *target, } #ifdef CONFIG_PARAVIRT_XXL -/* identity function, which can be inlined */ -u64 notrace _paravirt_ident_64(u64 x) -{ - return x; -} +DEFINE_PARAVIRT_ASM(_paravirt_ident_64, "mov %rdi, %rax", .text); +DEFINE_PARAVIRT_ASM(pv_native_save_fl, "pushf; pop %rax", .noinstr.text); +DEFINE_PARAVIRT_ASM(pv_native_irq_disable, "cli", .noinstr.text); +DEFINE_PARAVIRT_ASM(pv_native_irq_enable, "sti", .noinstr.text); +DEFINE_PARAVIRT_ASM(pv_native_read_cr2, "mov %cr2, %rax", .noinstr.text); #endif DEFINE_STATIC_KEY_TRUE(virt_spin_lock_key); @@ -197,11 +197,6 @@ void paravirt_end_context_switch(struct task_struct *next) arch_enter_lazy_mmu_mode(); } -static noinstr unsigned long pv_native_read_cr2(void) -{ - return native_read_cr2(); -} - static noinstr void pv_native_write_cr2(unsigned long val) { native_write_cr2(val); @@ -222,16 +217,6 @@ noinstr void pv_native_wbinvd(void) native_wbinvd(); } -static noinstr void pv_native_irq_enable(void) -{ - native_irq_enable(); -} - -static noinstr void pv_native_irq_disable(void) -{ - native_irq_disable(); -} - static noinstr void pv_native_safe_halt(void) { native_safe_halt(); @@ -298,7 +283,7 @@ struct paravirt_patch_template pv_ops = { .cpu.end_context_switch = paravirt_nop, /* Irq ops. */ - .irq.save_fl = __PV_IS_CALLEE_SAVE(native_save_fl), + .irq.save_fl = __PV_IS_CALLEE_SAVE(pv_native_save_fl), .irq.irq_disable = __PV_IS_CALLEE_SAVE(pv_native_irq_disable), .irq.irq_enable = __PV_IS_CALLEE_SAVE(pv_native_irq_enable), .irq.safe_halt = pv_native_safe_halt, @@ -363,8 +348,7 @@ struct paravirt_patch_template pv_ops = { .mmu.make_pte = PTE_IDENT, .mmu.make_pgd = PTE_IDENT, - .mmu.dup_mmap = paravirt_nop, - .mmu.activate_mm = paravirt_nop, + .mmu.enter_mmap = paravirt_nop, .mmu.lazy_mode = { .enter = paravirt_nop, diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 30bbe4abb5d6..de6be0a3965e 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -124,7 +124,7 @@ void __init pci_iommu_alloc(void) } /* - * See <Documentation/x86/x86_64/boot-options.rst> for the iommu kernel + * See <Documentation/arch/x86/x86_64/boot-options.rst> for the iommu kernel * parameter documentation. */ static __init int iommu_setup(char *p) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 470c128759ea..708c87b88cc1 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -212,7 +212,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) switch_fpu_finish(); /* Load the Intel cache allocation PQR MSR. */ - resctrl_sched_in(); + resctrl_sched_in(next_p); return prev_p; } diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 4e34b3b68ebd..bb65a68b4b49 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -656,7 +656,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) } /* Load the Intel cache allocation PQR MSR. */ - resctrl_sched_in(); + resctrl_sched_in(next_p); return prev_p; } diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c index 679026a640ef..b031244d6d2d 100644 --- a/arch/x86/kernel/sev.c +++ b/arch/x86/kernel/sev.c @@ -22,6 +22,8 @@ #include <linux/efi.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/psp-sev.h> +#include <uapi/linux/sev-guest.h> #include <asm/cpu_entry_area.h> #include <asm/stacktrace.h> @@ -2175,7 +2177,7 @@ static int __init init_sev_config(char *str) } __setup("sev=", init_sev_config); -int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, unsigned long *fw_err) +int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, struct snp_guest_request_ioctl *rio) { struct ghcb_state state; struct es_em_ctxt ctxt; @@ -2183,11 +2185,7 @@ int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, unsigned struct ghcb *ghcb; int ret; - if (!cc_platform_has(CC_ATTR_GUEST_SEV_SNP)) - return -ENODEV; - - if (!fw_err) - return -EINVAL; + rio->exitinfo2 = SEV_RET_NO_FW_CALL; /* * __sev_get_ghcb() needs to run with IRQs disabled because it is using @@ -2212,15 +2210,26 @@ int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, unsigned if (ret) goto e_put; - if (ghcb->save.sw_exit_info_2) { - /* Number of expected pages are returned in RBX */ - if (exit_code == SVM_VMGEXIT_EXT_GUEST_REQUEST && - ghcb->save.sw_exit_info_2 == SNP_GUEST_REQ_INVALID_LEN) - input->data_npages = ghcb_get_rbx(ghcb); + rio->exitinfo2 = ghcb->save.sw_exit_info_2; + switch (rio->exitinfo2) { + case 0: + break; - *fw_err = ghcb->save.sw_exit_info_2; + case SNP_GUEST_VMM_ERR(SNP_GUEST_VMM_ERR_BUSY): + ret = -EAGAIN; + break; + case SNP_GUEST_VMM_ERR(SNP_GUEST_VMM_ERR_INVALID_LEN): + /* Number of expected pages are returned in RBX */ + if (exit_code == SVM_VMGEXIT_EXT_GUEST_REQUEST) { + input->data_npages = ghcb_get_rbx(ghcb); + ret = -ENOSPC; + break; + } + fallthrough; + default: ret = -EIO; + break; } e_put: diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 9013bb28255a..851477f7d728 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -121,17 +121,20 @@ int arch_update_cpu_topology(void) return retval; } + +static unsigned int smpboot_warm_reset_vector_count; + static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip) { unsigned long flags; spin_lock_irqsave(&rtc_lock, flags); - CMOS_WRITE(0xa, 0xf); + if (!smpboot_warm_reset_vector_count++) { + CMOS_WRITE(0xa, 0xf); + *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) = start_eip >> 4; + *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = start_eip & 0xf; + } spin_unlock_irqrestore(&rtc_lock, flags); - *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) = - start_eip >> 4; - *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = - start_eip & 0xf; } static inline void smpboot_restore_warm_reset_vector(void) @@ -143,10 +146,12 @@ static inline void smpboot_restore_warm_reset_vector(void) * to default values. */ spin_lock_irqsave(&rtc_lock, flags); - CMOS_WRITE(0, 0xf); + if (!--smpboot_warm_reset_vector_count) { + CMOS_WRITE(0, 0xf); + *((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0; + } spin_unlock_irqrestore(&rtc_lock, flags); - *((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0; } /* @@ -1059,8 +1064,6 @@ int common_cpu_up(unsigned int cpu, struct task_struct *idle) #ifdef CONFIG_X86_32 /* Stack for startup_32 can be just as for start_secondary onwards */ per_cpu(pcpu_hot.top_of_stack, cpu) = task_top_of_stack(idle); -#else - initial_gs = per_cpu_offset(cpu); #endif return 0; } @@ -1086,9 +1089,14 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle, start_ip = real_mode_header->trampoline_start64; #endif idle->thread.sp = (unsigned long)task_pt_regs(idle); - early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu); initial_code = (unsigned long)start_secondary; - initial_stack = idle->thread.sp; + + if (IS_ENABLED(CONFIG_X86_32)) { + early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu); + initial_stack = idle->thread.sp; + } else { + smpboot_control = cpu; + } /* Enable the espfix hack for this CPU */ init_espfix_ap(cpu); diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index ef80d361b463..ecdeb0974a87 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -33,8 +33,8 @@ static int __init iommu_init_noop(void) { return 0; } static void iommu_shutdown_noop(void) { } bool __init bool_x86_init_noop(void) { return false; } void x86_op_int_noop(int cpu) { } -static __init int set_rtc_noop(const struct timespec64 *now) { return -EINVAL; } -static __init void get_rtc_noop(struct timespec64 *now) { } +static int set_rtc_noop(const struct timespec64 *now) { return -EINVAL; } +static void get_rtc_noop(struct timespec64 *now) { } static __initconst const struct of_device_id of_cmos_match[] = { { .compatible = "motorola,mc146818" }, @@ -134,6 +134,7 @@ static void enc_status_change_prepare_noop(unsigned long vaddr, int npages, bool static bool enc_status_change_finish_noop(unsigned long vaddr, int npages, bool enc) { return false; } static bool enc_tlb_flush_required_noop(bool enc) { return false; } static bool enc_cache_flush_required_noop(void) { return false; } +static bool is_private_mmio_noop(u64 addr) {return false; } struct x86_platform_ops x86_platform __ro_after_init = { .calibrate_cpu = native_calibrate_cpu_early, @@ -149,6 +150,7 @@ struct x86_platform_ops x86_platform __ro_after_init = { .realmode_reserve = reserve_real_mode, .realmode_init = init_real_mode, .hyper.pin_vcpu = x86_op_int_noop, + .hyper.is_private_mmio = is_private_mmio_noop, .guest = { .enc_status_change_prepare = enc_status_change_prepare_noop, diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig index 8e578311ca9d..89ca7f4c1464 100644 --- a/arch/x86/kvm/Kconfig +++ b/arch/x86/kvm/Kconfig @@ -46,7 +46,6 @@ config KVM select KVM_XFER_TO_GUEST_WORK select KVM_GENERIC_DIRTYLOG_READ_PROTECT select KVM_VFIO - select SRCU select INTERVAL_TREE select HAVE_KVM_PM_NOTIFIER if PM select KVM_GENERIC_HARDWARE_ENABLING diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c index 042dee556125..995eb5054360 100644 --- a/arch/x86/kvm/ioapic.c +++ b/arch/x86/kvm/ioapic.c @@ -368,9 +368,39 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val) mask_after = e->fields.mask; if (mask_before != mask_after) kvm_fire_mask_notifiers(ioapic->kvm, KVM_IRQCHIP_IOAPIC, index, mask_after); - if (e->fields.trig_mode == IOAPIC_LEVEL_TRIG - && ioapic->irr & (1 << index)) - ioapic_service(ioapic, index, false); + if (e->fields.trig_mode == IOAPIC_LEVEL_TRIG && + ioapic->irr & (1 << index) && !e->fields.mask && !e->fields.remote_irr) { + /* + * Pending status in irr may be outdated: the IRQ line may have + * already been deasserted by a device while the IRQ was masked. + * This occurs, for instance, if the interrupt is handled in a + * Linux guest as a oneshot interrupt (IRQF_ONESHOT). In this + * case the guest acknowledges the interrupt to the device in + * its threaded irq handler, i.e. after the EOI but before + * unmasking, so at the time of unmasking the IRQ line is + * already down but our pending irr bit is still set. In such + * cases, injecting this pending interrupt to the guest is + * buggy: the guest will receive an extra unwanted interrupt. + * + * So we need to check here if the IRQ is actually still pending. + * As we are generally not able to probe the IRQ line status + * directly, we do it through irqfd resampler. Namely, we clear + * the pending status and notify the resampler that this interrupt + * is done, without actually injecting it into the guest. If the + * IRQ line is actually already deasserted, we are done. If it is + * still asserted, a new interrupt will be shortly triggered + * through irqfd and injected into the guest. + * + * If, however, it's not possible to resample (no irqfd resampler + * registered for this irq), then unconditionally inject this + * pending interrupt into the guest, so the guest will not miss + * an interrupt, although may get an extra unwanted interrupt. + */ + if (kvm_notify_irqfd_resampler(ioapic->kvm, KVM_IRQCHIP_IOAPIC, index)) + ioapic->irr &= ~(1 << index); + else + ioapic_service(ioapic, index, false); + } if (e->fields.delivery_mode == APIC_DM_FIXED) { struct kvm_lapic_irq irq; diff --git a/arch/x86/kvm/kvm_onhyperv.h b/arch/x86/kvm/kvm_onhyperv.h index 287e98ef9df3..6272dabec02d 100644 --- a/arch/x86/kvm/kvm_onhyperv.h +++ b/arch/x86/kvm/kvm_onhyperv.h @@ -12,6 +12,11 @@ int hv_remote_flush_tlb_with_range(struct kvm *kvm, int hv_remote_flush_tlb(struct kvm *kvm); void hv_track_root_tdp(struct kvm_vcpu *vcpu, hpa_t root_tdp); #else /* !CONFIG_HYPERV */ +static inline int hv_remote_flush_tlb(struct kvm *kvm) +{ + return -EOPNOTSUPP; +} + static inline void hv_track_root_tdp(struct kvm_vcpu *vcpu, hpa_t root_tdp) { } diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c index ca684979e90d..cfc8ab773025 100644 --- a/arch/x86/kvm/svm/avic.c +++ b/arch/x86/kvm/svm/avic.c @@ -27,19 +27,38 @@ #include "irq.h" #include "svm.h" -/* AVIC GATAG is encoded using VM and VCPU IDs */ -#define AVIC_VCPU_ID_BITS 8 -#define AVIC_VCPU_ID_MASK ((1 << AVIC_VCPU_ID_BITS) - 1) +/* + * Encode the arbitrary VM ID and the vCPU's default APIC ID, i.e the vCPU ID, + * into the GATag so that KVM can retrieve the correct vCPU from a GALog entry + * if an interrupt can't be delivered, e.g. because the vCPU isn't running. + * + * For the vCPU ID, use however many bits are currently allowed for the max + * guest physical APIC ID (limited by the size of the physical ID table), and + * use whatever bits remain to assign arbitrary AVIC IDs to VMs. Note, the + * size of the GATag is defined by hardware (32 bits), but is an opaque value + * as far as hardware is concerned. + */ +#define AVIC_VCPU_ID_MASK AVIC_PHYSICAL_MAX_INDEX_MASK -#define AVIC_VM_ID_BITS 24 -#define AVIC_VM_ID_NR (1 << AVIC_VM_ID_BITS) -#define AVIC_VM_ID_MASK ((1 << AVIC_VM_ID_BITS) - 1) +#define AVIC_VM_ID_SHIFT HWEIGHT32(AVIC_PHYSICAL_MAX_INDEX_MASK) +#define AVIC_VM_ID_MASK (GENMASK(31, AVIC_VM_ID_SHIFT) >> AVIC_VM_ID_SHIFT) -#define AVIC_GATAG(x, y) (((x & AVIC_VM_ID_MASK) << AVIC_VCPU_ID_BITS) | \ - (y & AVIC_VCPU_ID_MASK)) -#define AVIC_GATAG_TO_VMID(x) ((x >> AVIC_VCPU_ID_BITS) & AVIC_VM_ID_MASK) +#define AVIC_GATAG_TO_VMID(x) ((x >> AVIC_VM_ID_SHIFT) & AVIC_VM_ID_MASK) #define AVIC_GATAG_TO_VCPUID(x) (x & AVIC_VCPU_ID_MASK) +#define __AVIC_GATAG(vm_id, vcpu_id) ((((vm_id) & AVIC_VM_ID_MASK) << AVIC_VM_ID_SHIFT) | \ + ((vcpu_id) & AVIC_VCPU_ID_MASK)) +#define AVIC_GATAG(vm_id, vcpu_id) \ +({ \ + u32 ga_tag = __AVIC_GATAG(vm_id, vcpu_id); \ + \ + WARN_ON_ONCE(AVIC_GATAG_TO_VCPUID(ga_tag) != (vcpu_id)); \ + WARN_ON_ONCE(AVIC_GATAG_TO_VMID(ga_tag) != (vm_id)); \ + ga_tag; \ +}) + +static_assert(__AVIC_GATAG(AVIC_VM_ID_MASK, AVIC_VCPU_ID_MASK) == -1u); + static bool force_avic; module_param_unsafe(force_avic, bool, 0444); diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c index c25aeb550cd9..69ae5e1b3120 100644 --- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -12,6 +12,7 @@ #include <linux/kvm_host.h> #include <linux/kernel.h> #include <linux/highmem.h> +#include <linux/psp.h> #include <linux/psp-sev.h> #include <linux/pagemap.h> #include <linux/swap.h> @@ -1767,18 +1768,20 @@ int sev_vm_move_enc_context_from(struct kvm *kvm, unsigned int source_fd) { struct kvm_sev_info *dst_sev = &to_kvm_svm(kvm)->sev_info; struct kvm_sev_info *src_sev, *cg_cleanup_sev; - struct file *source_kvm_file; + struct fd f = fdget(source_fd); struct kvm *source_kvm; bool charged = false; int ret; - source_kvm_file = fget(source_fd); - if (!file_is_kvm(source_kvm_file)) { + if (!f.file) + return -EBADF; + + if (!file_is_kvm(f.file)) { ret = -EBADF; goto out_fput; } - source_kvm = source_kvm_file->private_data; + source_kvm = f.file->private_data; ret = sev_lock_two_vms(kvm, source_kvm); if (ret) goto out_fput; @@ -1828,8 +1831,7 @@ out_dst_cgroup: out_unlock: sev_unlock_two_vms(kvm, source_kvm); out_fput: - if (source_kvm_file) - fput(source_kvm_file); + fdput(f); return ret; } @@ -2046,18 +2048,20 @@ failed: int sev_vm_copy_enc_context_from(struct kvm *kvm, unsigned int source_fd) { - struct file *source_kvm_file; + struct fd f = fdget(source_fd); struct kvm *source_kvm; struct kvm_sev_info *source_sev, *mirror_sev; int ret; - source_kvm_file = fget(source_fd); - if (!file_is_kvm(source_kvm_file)) { + if (!f.file) + return -EBADF; + + if (!file_is_kvm(f.file)) { ret = -EBADF; goto e_source_fput; } - source_kvm = source_kvm_file->private_data; + source_kvm = f.file->private_data; ret = sev_lock_two_vms(kvm, source_kvm); if (ret) goto e_source_fput; @@ -2103,8 +2107,7 @@ int sev_vm_copy_enc_context_from(struct kvm *kvm, unsigned int source_fd) e_unlock: sev_unlock_two_vms(kvm, source_kvm); e_source_fput: - if (source_kvm_file) - fput(source_kvm_file); + fdput(f); return ret; } diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 252e7f37e4e2..f25bc3cbb250 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -3729,7 +3729,7 @@ static void svm_enable_nmi_window(struct kvm_vcpu *vcpu) svm->vmcb->save.rflags |= (X86_EFLAGS_TF | X86_EFLAGS_RF); } -static void svm_flush_tlb_current(struct kvm_vcpu *vcpu) +static void svm_flush_tlb_asid(struct kvm_vcpu *vcpu) { struct vcpu_svm *svm = to_svm(vcpu); @@ -3753,6 +3753,37 @@ static void svm_flush_tlb_current(struct kvm_vcpu *vcpu) svm->current_vmcb->asid_generation--; } +static void svm_flush_tlb_current(struct kvm_vcpu *vcpu) +{ + hpa_t root_tdp = vcpu->arch.mmu->root.hpa; + + /* + * When running on Hyper-V with EnlightenedNptTlb enabled, explicitly + * flush the NPT mappings via hypercall as flushing the ASID only + * affects virtual to physical mappings, it does not invalidate guest + * physical to host physical mappings. + */ + if (svm_hv_is_enlightened_tlb_enabled(vcpu) && VALID_PAGE(root_tdp)) + hyperv_flush_guest_mapping(root_tdp); + + svm_flush_tlb_asid(vcpu); +} + +static void svm_flush_tlb_all(struct kvm_vcpu *vcpu) +{ + /* + * When running on Hyper-V with EnlightenedNptTlb enabled, remote TLB + * flushes should be routed to hv_remote_flush_tlb() without requesting + * a "regular" remote flush. Reaching this point means either there's + * a KVM bug or a prior hv_remote_flush_tlb() call failed, both of + * which might be fatal to the guest. Yell, but try to recover. + */ + if (WARN_ON_ONCE(svm_hv_is_enlightened_tlb_enabled(vcpu))) + hv_remote_flush_tlb(vcpu->kvm); + + svm_flush_tlb_asid(vcpu); +} + static void svm_flush_tlb_gva(struct kvm_vcpu *vcpu, gva_t gva) { struct vcpu_svm *svm = to_svm(vcpu); @@ -4745,10 +4776,10 @@ static struct kvm_x86_ops svm_x86_ops __initdata = { .set_rflags = svm_set_rflags, .get_if_flag = svm_get_if_flag, - .flush_tlb_all = svm_flush_tlb_current, + .flush_tlb_all = svm_flush_tlb_all, .flush_tlb_current = svm_flush_tlb_current, .flush_tlb_gva = svm_flush_tlb_gva, - .flush_tlb_guest = svm_flush_tlb_current, + .flush_tlb_guest = svm_flush_tlb_asid, .vcpu_pre_run = svm_vcpu_pre_run, .vcpu_run = svm_vcpu_run, diff --git a/arch/x86/kvm/svm/svm_onhyperv.h b/arch/x86/kvm/svm/svm_onhyperv.h index cff838f15db5..786d46d73a8e 100644 --- a/arch/x86/kvm/svm/svm_onhyperv.h +++ b/arch/x86/kvm/svm/svm_onhyperv.h @@ -6,6 +6,8 @@ #ifndef __ARCH_X86_KVM_SVM_ONHYPERV_H__ #define __ARCH_X86_KVM_SVM_ONHYPERV_H__ +#include <asm/mshyperv.h> + #if IS_ENABLED(CONFIG_HYPERV) #include "kvm_onhyperv.h" @@ -15,6 +17,14 @@ static struct kvm_x86_ops svm_x86_ops; int svm_hv_enable_l2_tlb_flush(struct kvm_vcpu *vcpu); +static inline bool svm_hv_is_enlightened_tlb_enabled(struct kvm_vcpu *vcpu) +{ + struct hv_vmcb_enlightenments *hve = &to_svm(vcpu)->vmcb->control.hv_enlightenments; + + return ms_hyperv.nested_features & HV_X64_NESTED_ENLIGHTENED_TLB && + !!hve->hv_enlightenments_control.enlightened_npt_tlb; +} + static inline void svm_hv_init_vmcb(struct vmcb *vmcb) { struct hv_vmcb_enlightenments *hve = &vmcb->control.hv_enlightenments; @@ -80,6 +90,11 @@ static inline void svm_hv_update_vp_id(struct vmcb *vmcb, struct kvm_vcpu *vcpu) } #else +static inline bool svm_hv_is_enlightened_tlb_enabled(struct kvm_vcpu *vcpu) +{ + return false; +} + static inline void svm_hv_init_vmcb(struct vmcb *vmcb) { } diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index 7c4f5ca405c7..768487611db7 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -2903,7 +2903,7 @@ static int nested_vmx_check_address_space_size(struct kvm_vcpu *vcpu, static int nested_vmx_check_host_state(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12) { - bool ia32e; + bool ia32e = !!(vmcs12->vm_exit_controls & VM_EXIT_HOST_ADDR_SPACE_SIZE); if (CC(!nested_host_cr0_valid(vcpu, vmcs12->host_cr0)) || CC(!nested_host_cr4_valid(vcpu, vmcs12->host_cr4)) || @@ -2923,12 +2923,6 @@ static int nested_vmx_check_host_state(struct kvm_vcpu *vcpu, vmcs12->host_ia32_perf_global_ctrl))) return -EINVAL; -#ifdef CONFIG_X86_64 - ia32e = !!(vmcs12->vm_exit_controls & VM_EXIT_HOST_ADDR_SPACE_SIZE); -#else - ia32e = false; -#endif - if (ia32e) { if (CC(!(vmcs12->host_cr4 & X86_CR4_PAE))) return -EINVAL; @@ -3022,7 +3016,7 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12, enum vm_entry_failure_code *entry_failure_code) { - bool ia32e; + bool ia32e = !!(vmcs12->vm_entry_controls & VM_ENTRY_IA32E_MODE); *entry_failure_code = ENTRY_FAIL_DEFAULT; @@ -3048,6 +3042,13 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu, vmcs12->guest_ia32_perf_global_ctrl))) return -EINVAL; + if (CC((vmcs12->guest_cr0 & (X86_CR0_PG | X86_CR0_PE)) == X86_CR0_PG)) + return -EINVAL; + + if (CC(ia32e && !(vmcs12->guest_cr4 & X86_CR4_PAE)) || + CC(ia32e && !(vmcs12->guest_cr0 & X86_CR0_PG))) + return -EINVAL; + /* * If the load IA32_EFER VM-entry control is 1, the following checks * are performed on the field for the IA32_EFER MSR: @@ -3059,7 +3060,6 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu, */ if (to_vmx(vcpu)->nested.nested_run_pending && (vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_EFER)) { - ia32e = (vmcs12->vm_entry_controls & VM_ENTRY_IA32E_MODE) != 0; if (CC(!kvm_valid_efer(vcpu, vmcs12->guest_ia32_efer)) || CC(ia32e != !!(vmcs12->guest_ia32_efer & EFER_LMA)) || CC(((vmcs12->guest_cr0 & X86_CR0_PG) && @@ -3868,7 +3868,12 @@ static void nested_vmx_inject_exception_vmexit(struct kvm_vcpu *vcpu) exit_qual = 0; } - if (ex->has_error_code) { + /* + * Unlike AMD's Paged Real Mode, which reports an error code on #PF + * VM-Exits even if the CPU is in Real Mode, Intel VMX never sets the + * "has error code" flags on VM-Exit if the CPU is in Real Mode. + */ + if (ex->has_error_code && is_protmode(vcpu)) { /* * Intel CPUs do not generate error codes with bits 31:16 set, * and more importantly VMX disallows setting bits 31:16 in the diff --git a/arch/x86/kvm/vmx/vmenter.S b/arch/x86/kvm/vmx/vmenter.S index f550540ed54e..631fd7da2bc3 100644 --- a/arch/x86/kvm/vmx/vmenter.S +++ b/arch/x86/kvm/vmx/vmenter.S @@ -262,7 +262,7 @@ SYM_INNER_LABEL(vmx_vmexit, SYM_L_GLOBAL) * eIBRS has its own protection against poisoned RSB, so it doesn't * need the RSB filling sequence. But it does need to be enabled, and a * single call to retire, before the first unbalanced RET. - */ + */ FILL_RETURN_BUFFER %_ASM_CX, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_VMEXIT,\ X86_FEATURE_RSB_VMEXIT_LITE @@ -311,7 +311,7 @@ SYM_FUNC_END(vmx_do_nmi_irqoff) * vmread_error_trampoline - Trampoline from inline asm to vmread_error() * @field: VMCS field encoding that failed * @fault: %true if the VMREAD faulted, %false if it failed - + * * Save and restore volatile registers across a call to vmread_error(). Note, * all parameters are passed on the stack. */ diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index bcac3efcde41..d2d6e1b6c788 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -874,7 +874,7 @@ void vmx_update_exception_bitmap(struct kvm_vcpu *vcpu) */ if (is_guest_mode(vcpu)) eb |= get_vmcs12(vcpu)->exception_bitmap; - else { + else { int mask = 0, match = 0; if (enable_ept && (eb & (1u << PF_VECTOR))) { @@ -1282,7 +1282,7 @@ void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu) } } - if (vmx->nested.need_vmcs12_to_shadow_sync) + if (vmx->nested.need_vmcs12_to_shadow_sync) nested_sync_vmcs12_to_shadow(vcpu); if (vmx->guest_state_loaded) @@ -5049,10 +5049,10 @@ static int vmx_interrupt_allowed(struct kvm_vcpu *vcpu, bool for_injection) if (to_vmx(vcpu)->nested.nested_run_pending) return -EBUSY; - /* - * An IRQ must not be injected into L2 if it's supposed to VM-Exit, - * e.g. if the IRQ arrived asynchronously after checking nested events. - */ + /* + * An IRQ must not be injected into L2 if it's supposed to VM-Exit, + * e.g. if the IRQ arrived asynchronously after checking nested events. + */ if (for_injection && is_guest_mode(vcpu) && nested_exit_on_intr(vcpu)) return -EBUSY; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 7713420abab0..3d852ce84920 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4432,6 +4432,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_VAPIC: case KVM_CAP_ENABLE_CAP: case KVM_CAP_VM_DISABLE_NX_HUGE_PAGES: + case KVM_CAP_IRQFD_RESAMPLE: r = 1; break; case KVM_CAP_EXIT_HYPERCALL: @@ -8903,6 +8904,8 @@ restart: } if (ctxt->have_exception) { + WARN_ON_ONCE(vcpu->mmio_needed && !vcpu->mmio_is_write); + vcpu->mmio_needed = false; r = 1; inject_emulated_exception(vcpu); } else if (vcpu->arch.pio.count) { @@ -9906,13 +9909,20 @@ int kvm_check_nested_events(struct kvm_vcpu *vcpu) static void kvm_inject_exception(struct kvm_vcpu *vcpu) { + /* + * Suppress the error code if the vCPU is in Real Mode, as Real Mode + * exceptions don't report error codes. The presence of an error code + * is carried with the exception and only stripped when the exception + * is injected as intercepted #PF VM-Exits for AMD's Paged Real Mode do + * report an error code despite the CPU being in Real Mode. + */ + vcpu->arch.exception.has_error_code &= is_protmode(vcpu); + trace_kvm_inj_exception(vcpu->arch.exception.vector, vcpu->arch.exception.has_error_code, vcpu->arch.exception.error_code, vcpu->arch.exception.injected); - if (vcpu->arch.exception.error_code && !is_protmode(vcpu)) - vcpu->arch.exception.error_code = false; static_call(kvm_x86_inject_exception)(vcpu); } diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 4f1a40a86534..01932af64193 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -71,6 +71,6 @@ ifneq ($(CONFIG_GENERIC_CSUM),y) endif lib-y += clear_page_64.o copy_page_64.o lib-y += memmove_64.o memset_64.o - lib-y += copy_user_64.o + lib-y += copy_user_64.o copy_user_uncached_64.o lib-y += cmpxchg16b_emu.o endif diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S index ecbfb4dd3b01..f74a3e704a1c 100644 --- a/arch/x86/lib/clear_page_64.S +++ b/arch/x86/lib/clear_page_64.S @@ -57,134 +57,85 @@ EXPORT_SYMBOL_GPL(clear_page_erms) * Input: * rdi destination * rcx count + * rax is zero * * Output: * rcx: uncleared bytes or 0 if successful. */ -SYM_FUNC_START(clear_user_original) - /* - * Copy only the lower 32 bits of size as that is enough to handle the rest bytes, - * i.e., no need for a 'q' suffix and thus a REX prefix. - */ - mov %ecx,%eax - shr $3,%rcx - jz .Lrest_bytes +SYM_FUNC_START(rep_stos_alternative) + cmpq $64,%rcx + jae .Lunrolled - # do the qwords first - .p2align 4 -.Lqwords: - movq $0,(%rdi) - lea 8(%rdi),%rdi - dec %rcx - jnz .Lqwords + cmp $8,%ecx + jae .Lword -.Lrest_bytes: - and $7, %eax - jz .Lexit + testl %ecx,%ecx + je .Lexit - # now do the rest bytes -.Lbytes: - movb $0,(%rdi) +.Lclear_user_tail: +0: movb %al,(%rdi) inc %rdi - dec %eax - jnz .Lbytes - + dec %rcx + jnz .Lclear_user_tail .Lexit: - /* - * %rax still needs to be cleared in the exception case because this function is called - * from inline asm and the compiler expects %rax to be zero when exiting the inline asm, - * in case it might reuse it somewhere. - */ - xor %eax,%eax - RET - -.Lqwords_exception: - # convert remaining qwords back into bytes to return to caller - shl $3, %rcx - and $7, %eax - add %rax,%rcx - jmp .Lexit - -.Lbytes_exception: - mov %eax,%ecx - jmp .Lexit - - _ASM_EXTABLE_UA(.Lqwords, .Lqwords_exception) - _ASM_EXTABLE_UA(.Lbytes, .Lbytes_exception) -SYM_FUNC_END(clear_user_original) -EXPORT_SYMBOL(clear_user_original) - -/* - * Alternative clear user-space when CPU feature X86_FEATURE_REP_GOOD is - * present. - * Input: - * rdi destination - * rcx count - * - * Output: - * rcx: uncleared bytes or 0 if successful. - */ -SYM_FUNC_START(clear_user_rep_good) - # call the original thing for less than a cacheline - cmp $64, %rcx - jb clear_user_original - -.Lprep: - # copy lower 32-bits for rest bytes - mov %ecx, %edx - shr $3, %rcx - jz .Lrep_good_rest_bytes - -.Lrep_good_qwords: - rep stosq - -.Lrep_good_rest_bytes: - and $7, %edx - jz .Lrep_good_exit - -.Lrep_good_bytes: - mov %edx, %ecx - rep stosb - -.Lrep_good_exit: - # see .Lexit comment above - xor %eax, %eax RET -.Lrep_good_qwords_exception: - # convert remaining qwords back into bytes to return to caller - shl $3, %rcx - and $7, %edx - add %rdx, %rcx - jmp .Lrep_good_exit + _ASM_EXTABLE_UA( 0b, .Lexit) - _ASM_EXTABLE_UA(.Lrep_good_qwords, .Lrep_good_qwords_exception) - _ASM_EXTABLE_UA(.Lrep_good_bytes, .Lrep_good_exit) -SYM_FUNC_END(clear_user_rep_good) -EXPORT_SYMBOL(clear_user_rep_good) +.Lword: +1: movq %rax,(%rdi) + addq $8,%rdi + sub $8,%ecx + je .Lexit + cmp $8,%ecx + jae .Lword + jmp .Lclear_user_tail -/* - * Alternative clear user-space when CPU feature X86_FEATURE_ERMS is present. - * Input: - * rdi destination - * rcx count - * - * Output: - * rcx: uncleared bytes or 0 if successful. - * - */ -SYM_FUNC_START(clear_user_erms) - # call the original thing for less than a cacheline - cmp $64, %rcx - jb clear_user_original - -.Lerms_bytes: - rep stosb - -.Lerms_exit: - xorl %eax,%eax + .p2align 4 +.Lunrolled: +10: movq %rax,(%rdi) +11: movq %rax,8(%rdi) +12: movq %rax,16(%rdi) +13: movq %rax,24(%rdi) +14: movq %rax,32(%rdi) +15: movq %rax,40(%rdi) +16: movq %rax,48(%rdi) +17: movq %rax,56(%rdi) + addq $64,%rdi + subq $64,%rcx + cmpq $64,%rcx + jae .Lunrolled + cmpl $8,%ecx + jae .Lword + testl %ecx,%ecx + jne .Lclear_user_tail RET - _ASM_EXTABLE_UA(.Lerms_bytes, .Lerms_exit) -SYM_FUNC_END(clear_user_erms) -EXPORT_SYMBOL(clear_user_erms) + /* + * If we take an exception on any of the + * word stores, we know that %rcx isn't zero, + * so we can just go to the tail clearing to + * get the exact count. + * + * The unrolled case might end up clearing + * some bytes twice. Don't care. + * + * We could use the value in %rdi to avoid + * a second fault on the exact count case, + * but do we really care? No. + * + * Finally, we could try to align %rdi at the + * top of the unrolling. But unaligned stores + * just aren't that common or expensive. + */ + _ASM_EXTABLE_UA( 1b, .Lclear_user_tail) + _ASM_EXTABLE_UA(10b, .Lclear_user_tail) + _ASM_EXTABLE_UA(11b, .Lclear_user_tail) + _ASM_EXTABLE_UA(12b, .Lclear_user_tail) + _ASM_EXTABLE_UA(13b, .Lclear_user_tail) + _ASM_EXTABLE_UA(14b, .Lclear_user_tail) + _ASM_EXTABLE_UA(15b, .Lclear_user_tail) + _ASM_EXTABLE_UA(16b, .Lclear_user_tail) + _ASM_EXTABLE_UA(17b, .Lclear_user_tail) +SYM_FUNC_END(rep_stos_alternative) +EXPORT_SYMBOL(rep_stos_alternative) diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index 9dec1b38a98f..4fc5c2de2de4 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -7,404 +7,108 @@ */ #include <linux/linkage.h> -#include <asm/current.h> -#include <asm/asm-offsets.h> -#include <asm/thread_info.h> -#include <asm/cpufeatures.h> -#include <asm/alternative.h> #include <asm/asm.h> -#include <asm/smap.h> #include <asm/export.h> -#include <asm/trapnr.h> - -.macro ALIGN_DESTINATION - /* check for bad alignment of destination */ - movl %edi,%ecx - andl $7,%ecx - jz 102f /* already aligned */ - subl $8,%ecx - negl %ecx - subl %ecx,%edx -100: movb (%rsi),%al -101: movb %al,(%rdi) - incq %rsi - incq %rdi - decl %ecx - jnz 100b -102: - - _ASM_EXTABLE_CPY(100b, .Lcopy_user_handle_align) - _ASM_EXTABLE_CPY(101b, .Lcopy_user_handle_align) -.endm /* - * copy_user_generic_unrolled - memory copy with exception handling. - * This version is for CPUs like P4 that don't have efficient micro - * code for rep movsq - * - * Input: - * rdi destination - * rsi source - * rdx count - * - * Output: - * eax uncopied bytes or 0 if successful. - */ -SYM_FUNC_START(copy_user_generic_unrolled) - ASM_STAC - cmpl $8,%edx - jb .Lcopy_user_short_string_bytes - ALIGN_DESTINATION - movl %edx,%ecx - andl $63,%edx - shrl $6,%ecx - jz copy_user_short_string -1: movq (%rsi),%r8 -2: movq 1*8(%rsi),%r9 -3: movq 2*8(%rsi),%r10 -4: movq 3*8(%rsi),%r11 -5: movq %r8,(%rdi) -6: movq %r9,1*8(%rdi) -7: movq %r10,2*8(%rdi) -8: movq %r11,3*8(%rdi) -9: movq 4*8(%rsi),%r8 -10: movq 5*8(%rsi),%r9 -11: movq 6*8(%rsi),%r10 -12: movq 7*8(%rsi),%r11 -13: movq %r8,4*8(%rdi) -14: movq %r9,5*8(%rdi) -15: movq %r10,6*8(%rdi) -16: movq %r11,7*8(%rdi) - leaq 64(%rsi),%rsi - leaq 64(%rdi),%rdi - decl %ecx - jnz 1b - jmp copy_user_short_string - -30: shll $6,%ecx - addl %ecx,%edx - jmp .Lcopy_user_handle_tail - - _ASM_EXTABLE_CPY(1b, 30b) - _ASM_EXTABLE_CPY(2b, 30b) - _ASM_EXTABLE_CPY(3b, 30b) - _ASM_EXTABLE_CPY(4b, 30b) - _ASM_EXTABLE_CPY(5b, 30b) - _ASM_EXTABLE_CPY(6b, 30b) - _ASM_EXTABLE_CPY(7b, 30b) - _ASM_EXTABLE_CPY(8b, 30b) - _ASM_EXTABLE_CPY(9b, 30b) - _ASM_EXTABLE_CPY(10b, 30b) - _ASM_EXTABLE_CPY(11b, 30b) - _ASM_EXTABLE_CPY(12b, 30b) - _ASM_EXTABLE_CPY(13b, 30b) - _ASM_EXTABLE_CPY(14b, 30b) - _ASM_EXTABLE_CPY(15b, 30b) - _ASM_EXTABLE_CPY(16b, 30b) -SYM_FUNC_END(copy_user_generic_unrolled) -EXPORT_SYMBOL(copy_user_generic_unrolled) - -/* Some CPUs run faster using the string copy instructions. - * This is also a lot simpler. Use them when possible. - * - * Only 4GB of copy is supported. This shouldn't be a problem - * because the kernel normally only writes from/to page sized chunks - * even if user space passed a longer buffer. - * And more would be dangerous because both Intel and AMD have - * errata with rep movsq > 4GB. If someone feels the need to fix - * this please consider this. + * rep_movs_alternative - memory copy with exception handling. + * This version is for CPUs that don't have FSRM (Fast Short Rep Movs) * * Input: * rdi destination * rsi source - * rdx count + * rcx count * * Output: - * eax uncopied bytes or 0 if successful. - */ -SYM_FUNC_START(copy_user_generic_string) - ASM_STAC - cmpl $8,%edx - jb 2f /* less than 8 bytes, go to byte copy loop */ - ALIGN_DESTINATION - movl %edx,%ecx - shrl $3,%ecx - andl $7,%edx -1: rep movsq -2: movl %edx,%ecx -3: rep movsb - xorl %eax,%eax - ASM_CLAC - RET - -11: leal (%rdx,%rcx,8),%ecx -12: movl %ecx,%edx /* ecx is zerorest also */ - jmp .Lcopy_user_handle_tail - - _ASM_EXTABLE_CPY(1b, 11b) - _ASM_EXTABLE_CPY(3b, 12b) -SYM_FUNC_END(copy_user_generic_string) -EXPORT_SYMBOL(copy_user_generic_string) - -/* - * Some CPUs are adding enhanced REP MOVSB/STOSB instructions. - * It's recommended to use enhanced REP MOVSB/STOSB if it's enabled. - * - * Input: - * rdi destination - * rsi source - * rdx count + * rcx uncopied bytes or 0 if successful. * - * Output: - * eax uncopied bytes or 0 if successful. + * NOTE! The calling convention is very intentionally the same as + * for 'rep movs', so that we can rewrite the function call with + * just a plain 'rep movs' on machines that have FSRM. But to make + * it simpler for us, we can clobber rsi/rdi and rax/r8-r11 freely. */ -SYM_FUNC_START(copy_user_enhanced_fast_string) - ASM_STAC - /* CPUs without FSRM should avoid rep movsb for short copies */ - ALTERNATIVE "cmpl $64, %edx; jb copy_user_short_string", "", X86_FEATURE_FSRM - movl %edx,%ecx -1: rep movsb - xorl %eax,%eax - ASM_CLAC +SYM_FUNC_START(rep_movs_alternative) + cmpq $64,%rcx + jae .Lunrolled + + cmp $8,%ecx + jae .Lword + + testl %ecx,%ecx + je .Lexit + +.Lcopy_user_tail: +0: movb (%rsi),%al +1: movb %al,(%rdi) + inc %rdi + inc %rsi + dec %rcx + jne .Lcopy_user_tail +.Lexit: RET -12: movl %ecx,%edx /* ecx is zerorest also */ - jmp .Lcopy_user_handle_tail - - _ASM_EXTABLE_CPY(1b, 12b) -SYM_FUNC_END(copy_user_enhanced_fast_string) -EXPORT_SYMBOL(copy_user_enhanced_fast_string) - -/* - * Try to copy last bytes and clear the rest if needed. - * Since protection fault in copy_from/to_user is not a normal situation, - * it is not necessary to optimize tail handling. - * Don't try to copy the tail if machine check happened - * - * Input: - * eax trap number written by ex_handler_copy() - * rdi destination - * rsi source - * rdx count - * - * Output: - * eax uncopied bytes or 0 if successful. - */ -SYM_CODE_START_LOCAL(.Lcopy_user_handle_tail) - cmp $X86_TRAP_MC,%eax - je 3f - - movl %edx,%ecx -1: rep movsb -2: mov %ecx,%eax - ASM_CLAC + _ASM_EXTABLE_UA( 0b, .Lexit) + _ASM_EXTABLE_UA( 1b, .Lexit) + + .p2align 4 +.Lword: +2: movq (%rsi),%rax +3: movq %rax,(%rdi) + addq $8,%rsi + addq $8,%rdi + sub $8,%ecx + je .Lexit + cmp $8,%ecx + jae .Lword + jmp .Lcopy_user_tail + + _ASM_EXTABLE_UA( 2b, .Lcopy_user_tail) + _ASM_EXTABLE_UA( 3b, .Lcopy_user_tail) + + .p2align 4 +.Lunrolled: +10: movq (%rsi),%r8 +11: movq 8(%rsi),%r9 +12: movq 16(%rsi),%r10 +13: movq 24(%rsi),%r11 +14: movq %r8,(%rdi) +15: movq %r9,8(%rdi) +16: movq %r10,16(%rdi) +17: movq %r11,24(%rdi) +20: movq 32(%rsi),%r8 +21: movq 40(%rsi),%r9 +22: movq 48(%rsi),%r10 +23: movq 56(%rsi),%r11 +24: movq %r8,32(%rdi) +25: movq %r9,40(%rdi) +26: movq %r10,48(%rdi) +27: movq %r11,56(%rdi) + addq $64,%rsi + addq $64,%rdi + subq $64,%rcx + cmpq $64,%rcx + jae .Lunrolled + cmpl $8,%ecx + jae .Lword + testl %ecx,%ecx + jne .Lcopy_user_tail RET -3: - movl %edx,%eax - ASM_CLAC - RET - - _ASM_EXTABLE_CPY(1b, 2b) - -.Lcopy_user_handle_align: - addl %ecx,%edx /* ecx is zerorest also */ - jmp .Lcopy_user_handle_tail - -SYM_CODE_END(.Lcopy_user_handle_tail) - -/* - * Finish memcpy of less than 64 bytes. #AC should already be set. - * - * Input: - * rdi destination - * rsi source - * rdx count (< 64) - * - * Output: - * eax uncopied bytes or 0 if successful. - */ -SYM_CODE_START_LOCAL(copy_user_short_string) - movl %edx,%ecx - andl $7,%edx - shrl $3,%ecx - jz .Lcopy_user_short_string_bytes -18: movq (%rsi),%r8 -19: movq %r8,(%rdi) - leaq 8(%rsi),%rsi - leaq 8(%rdi),%rdi - decl %ecx - jnz 18b -.Lcopy_user_short_string_bytes: - andl %edx,%edx - jz 23f - movl %edx,%ecx -21: movb (%rsi),%al -22: movb %al,(%rdi) - incq %rsi - incq %rdi - decl %ecx - jnz 21b -23: xor %eax,%eax - ASM_CLAC - RET - -40: leal (%rdx,%rcx,8),%edx - jmp 60f -50: movl %ecx,%edx /* ecx is zerorest also */ -60: jmp .Lcopy_user_handle_tail - - _ASM_EXTABLE_CPY(18b, 40b) - _ASM_EXTABLE_CPY(19b, 40b) - _ASM_EXTABLE_CPY(21b, 50b) - _ASM_EXTABLE_CPY(22b, 50b) -SYM_CODE_END(copy_user_short_string) - -/* - * copy_user_nocache - Uncached memory copy with exception handling - * This will force destination out of cache for more performance. - * - * Note: Cached memory copy is used when destination or size is not - * naturally aligned. That is: - * - Require 8-byte alignment when size is 8 bytes or larger. - * - Require 4-byte alignment when size is 4 bytes. - */ -SYM_FUNC_START(__copy_user_nocache) - ASM_STAC - - /* If size is less than 8 bytes, go to 4-byte copy */ - cmpl $8,%edx - jb .L_4b_nocache_copy_entry - - /* If destination is not 8-byte aligned, "cache" copy to align it */ - ALIGN_DESTINATION - - /* Set 4x8-byte copy count and remainder */ - movl %edx,%ecx - andl $63,%edx - shrl $6,%ecx - jz .L_8b_nocache_copy_entry /* jump if count is 0 */ - - /* Perform 4x8-byte nocache loop-copy */ -.L_4x8b_nocache_copy_loop: -1: movq (%rsi),%r8 -2: movq 1*8(%rsi),%r9 -3: movq 2*8(%rsi),%r10 -4: movq 3*8(%rsi),%r11 -5: movnti %r8,(%rdi) -6: movnti %r9,1*8(%rdi) -7: movnti %r10,2*8(%rdi) -8: movnti %r11,3*8(%rdi) -9: movq 4*8(%rsi),%r8 -10: movq 5*8(%rsi),%r9 -11: movq 6*8(%rsi),%r10 -12: movq 7*8(%rsi),%r11 -13: movnti %r8,4*8(%rdi) -14: movnti %r9,5*8(%rdi) -15: movnti %r10,6*8(%rdi) -16: movnti %r11,7*8(%rdi) - leaq 64(%rsi),%rsi - leaq 64(%rdi),%rdi - decl %ecx - jnz .L_4x8b_nocache_copy_loop - - /* Set 8-byte copy count and remainder */ -.L_8b_nocache_copy_entry: - movl %edx,%ecx - andl $7,%edx - shrl $3,%ecx - jz .L_4b_nocache_copy_entry /* jump if count is 0 */ - - /* Perform 8-byte nocache loop-copy */ -.L_8b_nocache_copy_loop: -20: movq (%rsi),%r8 -21: movnti %r8,(%rdi) - leaq 8(%rsi),%rsi - leaq 8(%rdi),%rdi - decl %ecx - jnz .L_8b_nocache_copy_loop - - /* If no byte left, we're done */ -.L_4b_nocache_copy_entry: - andl %edx,%edx - jz .L_finish_copy - - /* If destination is not 4-byte aligned, go to byte copy: */ - movl %edi,%ecx - andl $3,%ecx - jnz .L_1b_cache_copy_entry - - /* Set 4-byte copy count (1 or 0) and remainder */ - movl %edx,%ecx - andl $3,%edx - shrl $2,%ecx - jz .L_1b_cache_copy_entry /* jump if count is 0 */ - - /* Perform 4-byte nocache copy: */ -30: movl (%rsi),%r8d -31: movnti %r8d,(%rdi) - leaq 4(%rsi),%rsi - leaq 4(%rdi),%rdi - - /* If no bytes left, we're done: */ - andl %edx,%edx - jz .L_finish_copy - - /* Perform byte "cache" loop-copy for the remainder */ -.L_1b_cache_copy_entry: - movl %edx,%ecx -.L_1b_cache_copy_loop: -40: movb (%rsi),%al -41: movb %al,(%rdi) - incq %rsi - incq %rdi - decl %ecx - jnz .L_1b_cache_copy_loop - - /* Finished copying; fence the prior stores */ -.L_finish_copy: - xorl %eax,%eax - ASM_CLAC - sfence - RET - -.L_fixup_4x8b_copy: - shll $6,%ecx - addl %ecx,%edx - jmp .L_fixup_handle_tail -.L_fixup_8b_copy: - lea (%rdx,%rcx,8),%rdx - jmp .L_fixup_handle_tail -.L_fixup_4b_copy: - lea (%rdx,%rcx,4),%rdx - jmp .L_fixup_handle_tail -.L_fixup_1b_copy: - movl %ecx,%edx -.L_fixup_handle_tail: - sfence - jmp .Lcopy_user_handle_tail - - _ASM_EXTABLE_CPY(1b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(2b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(3b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(4b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(5b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(6b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(7b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(8b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(9b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(10b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(11b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(12b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(13b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(14b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(15b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(16b, .L_fixup_4x8b_copy) - _ASM_EXTABLE_CPY(20b, .L_fixup_8b_copy) - _ASM_EXTABLE_CPY(21b, .L_fixup_8b_copy) - _ASM_EXTABLE_CPY(30b, .L_fixup_4b_copy) - _ASM_EXTABLE_CPY(31b, .L_fixup_4b_copy) - _ASM_EXTABLE_CPY(40b, .L_fixup_1b_copy) - _ASM_EXTABLE_CPY(41b, .L_fixup_1b_copy) -SYM_FUNC_END(__copy_user_nocache) -EXPORT_SYMBOL(__copy_user_nocache) + _ASM_EXTABLE_UA(10b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(11b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(12b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(13b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(14b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(15b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(16b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(17b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(20b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(21b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(22b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(23b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(24b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(25b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(26b, .Lcopy_user_tail) + _ASM_EXTABLE_UA(27b, .Lcopy_user_tail) +SYM_FUNC_END(rep_movs_alternative) +EXPORT_SYMBOL(rep_movs_alternative) diff --git a/arch/x86/lib/copy_user_uncached_64.S b/arch/x86/lib/copy_user_uncached_64.S new file mode 100644 index 000000000000..5c5f38d32672 --- /dev/null +++ b/arch/x86/lib/copy_user_uncached_64.S @@ -0,0 +1,242 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2023 Linus Torvalds <torvalds@linux-foundation.org> + */ + +#include <linux/linkage.h> +#include <asm/asm.h> +#include <asm/export.h> + +/* + * copy_user_nocache - Uncached memory copy with exception handling + * + * This copies from user space into kernel space, but the kernel + * space accesses can take a machine check exception, so they too + * need exception handling. + * + * Note: only 32-bit and 64-bit stores have non-temporal versions, + * and we only use aligned versions. Any unaligned parts at the + * start or end of the copy will be done using normal cached stores. + * + * Input: + * rdi destination + * rsi source + * edx count + * + * Output: + * rax uncopied bytes or 0 if successful. + */ +SYM_FUNC_START(__copy_user_nocache) + /* If destination is not 7-byte aligned, we'll have to align it */ + testb $7,%dil + jne .Lalign + +.Lis_aligned: + cmp $64,%edx + jb .Lquadwords + + .p2align 4,0x90 +.Lunrolled: +10: movq (%rsi),%r8 +11: movq 8(%rsi),%r9 +12: movq 16(%rsi),%r10 +13: movq 24(%rsi),%r11 +20: movnti %r8,(%rdi) +21: movnti %r9,8(%rdi) +22: movnti %r10,16(%rdi) +23: movnti %r11,24(%rdi) +30: movq 32(%rsi),%r8 +31: movq 40(%rsi),%r9 +32: movq 48(%rsi),%r10 +33: movq 56(%rsi),%r11 +40: movnti %r8,32(%rdi) +41: movnti %r9,40(%rdi) +42: movnti %r10,48(%rdi) +43: movnti %r11,56(%rdi) + + addq $64,%rsi + addq $64,%rdi + sub $64,%edx + cmp $64,%edx + jae .Lunrolled + +/* + * First set of user mode loads have been done + * without any stores, so if they fail, we can + * just try the non-unrolled loop. + */ +_ASM_EXTABLE_UA(10b, .Lquadwords) +_ASM_EXTABLE_UA(11b, .Lquadwords) +_ASM_EXTABLE_UA(12b, .Lquadwords) +_ASM_EXTABLE_UA(13b, .Lquadwords) + +/* + * The second set of user mode loads have been + * done with 32 bytes stored to the destination, + * so we need to take that into account before + * falling back to the unrolled loop. + */ +_ASM_EXTABLE_UA(30b, .Lfixup32) +_ASM_EXTABLE_UA(31b, .Lfixup32) +_ASM_EXTABLE_UA(32b, .Lfixup32) +_ASM_EXTABLE_UA(33b, .Lfixup32) + +/* + * An exception on a write means that we're + * done, but we need to update the count + * depending on where in the unrolled loop + * we were. + */ +_ASM_EXTABLE_UA(20b, .Ldone0) +_ASM_EXTABLE_UA(21b, .Ldone8) +_ASM_EXTABLE_UA(22b, .Ldone16) +_ASM_EXTABLE_UA(23b, .Ldone24) +_ASM_EXTABLE_UA(40b, .Ldone32) +_ASM_EXTABLE_UA(41b, .Ldone40) +_ASM_EXTABLE_UA(42b, .Ldone48) +_ASM_EXTABLE_UA(43b, .Ldone56) + +.Lquadwords: + cmp $8,%edx + jb .Llong +50: movq (%rsi),%rax +51: movnti %rax,(%rdi) + addq $8,%rsi + addq $8,%rdi + sub $8,%edx + jmp .Lquadwords + +/* + * If we fail on the last full quadword, we will + * not try to do any byte-wise cached accesses. + * We will try to do one more 4-byte uncached + * one, though. + */ +_ASM_EXTABLE_UA(50b, .Llast4) +_ASM_EXTABLE_UA(51b, .Ldone0) + +.Llong: + test $4,%dl + je .Lword +60: movl (%rsi),%eax +61: movnti %eax,(%rdi) + addq $4,%rsi + addq $4,%rdi + sub $4,%edx +.Lword: + sfence + test $2,%dl + je .Lbyte +70: movw (%rsi),%ax +71: movw %ax,(%rdi) + addq $2,%rsi + addq $2,%rdi + sub $2,%edx +.Lbyte: + test $1,%dl + je .Ldone +80: movb (%rsi),%al +81: movb %al,(%rdi) + dec %edx +.Ldone: + mov %edx,%eax + RET + +/* + * If we fail on the last four bytes, we won't + * bother with any fixups. It's dead, Jim. Note + * that there's no need for 'sfence' for any + * of this, since the exception will have been + * serializing. + */ +_ASM_EXTABLE_UA(60b, .Ldone) +_ASM_EXTABLE_UA(61b, .Ldone) +_ASM_EXTABLE_UA(70b, .Ldone) +_ASM_EXTABLE_UA(71b, .Ldone) +_ASM_EXTABLE_UA(80b, .Ldone) +_ASM_EXTABLE_UA(81b, .Ldone) + +/* + * This is the "head needs aliging" case when + * the destination isn't 8-byte aligned. The + * 4-byte case can be done uncached, but any + * smaller alignment is done with regular stores. + */ +.Lalign: + test $1,%dil + je .Lalign_word + test %edx,%edx + je .Ldone +90: movb (%rsi),%al +91: movb %al,(%rdi) + inc %rsi + inc %rdi + dec %edx +.Lalign_word: + test $2,%dil + je .Lalign_long + cmp $2,%edx + jb .Lbyte +92: movw (%rsi),%ax +93: movw %ax,(%rdi) + addq $2,%rsi + addq $2,%rdi + sub $2,%edx +.Lalign_long: + test $4,%dil + je .Lis_aligned + cmp $4,%edx + jb .Lword +94: movl (%rsi),%eax +95: movnti %eax,(%rdi) + addq $4,%rsi + addq $4,%rdi + sub $4,%edx + jmp .Lis_aligned + +/* + * If we fail on the initial alignment accesses, + * we're all done. Again, no point in trying to + * do byte-by-byte probing if the 4-byte load + * fails - we're not doing any uncached accesses + * any more. + */ +_ASM_EXTABLE_UA(90b, .Ldone) +_ASM_EXTABLE_UA(91b, .Ldone) +_ASM_EXTABLE_UA(92b, .Ldone) +_ASM_EXTABLE_UA(93b, .Ldone) +_ASM_EXTABLE_UA(94b, .Ldone) +_ASM_EXTABLE_UA(95b, .Ldone) + +/* + * Exception table fixups for faults in the middle + */ +.Ldone56: sub $8,%edx +.Ldone48: sub $8,%edx +.Ldone40: sub $8,%edx +.Ldone32: sub $8,%edx +.Ldone24: sub $8,%edx +.Ldone16: sub $8,%edx +.Ldone8: sub $8,%edx +.Ldone0: + mov %edx,%eax + RET + +.Lfixup32: + addq $32,%rsi + addq $32,%rdi + sub $32,%edx + jmp .Lquadwords + +.Llast4: +52: movl (%rsi),%eax +53: movnti %eax,(%rdi) + sfence + sub $4,%edx + mov %edx,%eax + RET +_ASM_EXTABLE_UA(52b, .Ldone0) +_ASM_EXTABLE_UA(53b, .Ldone0) + +SYM_FUNC_END(__copy_user_nocache) +EXPORT_SYMBOL(__copy_user_nocache) diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index a64017602010..8f95fb267caa 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -11,13 +11,6 @@ .section .noinstr.text, "ax" /* - * We build a jump to memcpy_orig by default which gets NOPped out on - * the majority of x86 CPUs which set REP_GOOD. In addition, CPUs which - * have the enhanced REP MOVSB/STOSB feature (ERMS), change those NOPs - * to a jmp to memcpy_erms which does the REP; MOVSB mem copy. - */ - -/* * memcpy - Copy a memory block. * * Input: @@ -27,17 +20,21 @@ * * Output: * rax original destination + * + * The FSRM alternative should be done inline (avoiding the call and + * the disgusting return handling), but that would require some help + * from the compiler for better calling conventions. + * + * The 'rep movsb' itself is small enough to replace the call, but the + * two register moves blow up the code. And one of them is "needed" + * only for the return value that is the same as the source input, + * which the compiler could/should do much better anyway. */ SYM_TYPED_FUNC_START(__memcpy) - ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \ - "jmp memcpy_erms", X86_FEATURE_ERMS + ALTERNATIVE "jmp memcpy_orig", "", X86_FEATURE_FSRM movq %rdi, %rax movq %rdx, %rcx - shrq $3, %rcx - andl $7, %edx - rep movsq - movl %edx, %ecx rep movsb RET SYM_FUNC_END(__memcpy) @@ -46,17 +43,6 @@ EXPORT_SYMBOL(__memcpy) SYM_FUNC_ALIAS(memcpy, __memcpy) EXPORT_SYMBOL(memcpy) -/* - * memcpy_erms() - enhanced fast string memcpy. This is faster and - * simpler than memcpy. Use memcpy_erms when possible. - */ -SYM_FUNC_START_LOCAL(memcpy_erms) - movq %rdi, %rax - movq %rdx, %rcx - rep movsb - RET -SYM_FUNC_END(memcpy_erms) - SYM_FUNC_START_LOCAL(memcpy_orig) movq %rdi, %rax diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S index 6143b1a6fa2c..7c59a704c458 100644 --- a/arch/x86/lib/memset_64.S +++ b/arch/x86/lib/memset_64.S @@ -18,27 +18,22 @@ * rdx count (bytes) * * rax original destination + * + * The FSRS alternative should be done inline (avoiding the call and + * the disgusting return handling), but that would require some help + * from the compiler for better calling conventions. + * + * The 'rep stosb' itself is small enough to replace the call, but all + * the register moves blow up the code. And two of them are "needed" + * only for the return value that is the same as the source input, + * which the compiler could/should do much better anyway. */ SYM_FUNC_START(__memset) - /* - * Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended - * to use it when possible. If not available, use fast string instructions. - * - * Otherwise, use original memset function. - */ - ALTERNATIVE_2 "jmp memset_orig", "", X86_FEATURE_REP_GOOD, \ - "jmp memset_erms", X86_FEATURE_ERMS + ALTERNATIVE "jmp memset_orig", "", X86_FEATURE_FSRS movq %rdi,%r9 + movb %sil,%al movq %rdx,%rcx - andl $7,%edx - shrq $3,%rcx - /* expand byte value */ - movzbl %sil,%esi - movabs $0x0101010101010101,%rax - imulq %rsi,%rax - rep stosq - movl %edx,%ecx rep stosb movq %r9,%rax RET @@ -48,26 +43,6 @@ EXPORT_SYMBOL(__memset) SYM_FUNC_ALIAS(memset, __memset) EXPORT_SYMBOL(memset) -/* - * ISO C memset - set a memory block to a byte value. This function uses - * enhanced rep stosb to override the fast string function. - * The code is simpler and shorter than the fast string function as well. - * - * rdi destination - * rsi value (char) - * rdx count (bytes) - * - * rax original destination - */ -SYM_FUNC_START_LOCAL(memset_erms) - movq %rdi,%r9 - movb %sil,%al - movq %rdx,%rcx - rep stosb - movq %r9,%rax - RET -SYM_FUNC_END(memset_erms) - SYM_FUNC_START_LOCAL(memset_orig) movq %rdi,%r10 diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index 6c1f8ac5e721..c3a5bbc0b41e 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -45,7 +45,11 @@ EXPORT_SYMBOL_GPL(arch_wb_cache_pmem); long __copy_user_flushcache(void *dst, const void __user *src, unsigned size) { unsigned long flushed, dest = (unsigned long) dst; - long rc = __copy_user_nocache(dst, src, size, 0); + long rc; + + stac(); + rc = __copy_user_nocache(dst, src, size); + clac(); /* * __copy_user_nocache() uses non-temporal stores for the bulk diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c index 7316a8224259..e91500a80963 100644 --- a/arch/x86/mm/cpu_entry_area.c +++ b/arch/x86/mm/cpu_entry_area.c @@ -10,6 +10,7 @@ #include <asm/fixmap.h> #include <asm/desc.h> #include <asm/kasan.h> +#include <asm/setup.h> static DEFINE_PER_CPU_PAGE_ALIGNED(struct entry_stack_page, entry_stack_storage); @@ -29,6 +30,12 @@ static __init void init_cea_offsets(void) unsigned int max_cea; unsigned int i, j; + if (!kaslr_enabled()) { + for_each_possible_cpu(i) + per_cpu(_cea_offset, i) = i; + return; + } + max_cea = (CPU_ENTRY_AREA_MAP_SIZE - PAGE_SIZE) / CPU_ENTRY_AREA_SIZE; /* O(sodding terrible) */ diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index cb258f58fdc8..cbc53da4c1b4 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -806,7 +806,7 @@ void __init poking_init(void) BUG_ON(!poking_mm); /* Xen PV guests need the PGD to be pinned. */ - paravirt_arch_dup_mmap(NULL, poking_mm); + paravirt_enter_mmap(poking_mm); /* * Randomize the poking address, but make sure that the following page diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 6453fbaedb08..aa7d279321ea 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -116,6 +116,11 @@ static void __ioremap_check_other(resource_size_t addr, struct ioremap_desc *des if (!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT)) return; + if (x86_platform.hyper.is_private_mmio(addr)) { + desc->flags |= IORES_MAP_ENCRYPTED; + return; + } + if (!IS_ENABLED(CONFIG_EFI)) return; diff --git a/arch/x86/mm/mem_encrypt_amd.c b/arch/x86/mm/mem_encrypt_amd.c index 9c4d8dbcb129..e0b51c09109f 100644 --- a/arch/x86/mm/mem_encrypt_amd.c +++ b/arch/x86/mm/mem_encrypt_amd.c @@ -513,10 +513,14 @@ void __init mem_encrypt_free_decrypted_mem(void) npages = (vaddr_end - vaddr) >> PAGE_SHIFT; /* - * The unused memory range was mapped decrypted, change the encryption - * attribute from decrypted to encrypted before freeing it. + * If the unused memory range was mapped decrypted, change the encryption + * attribute from decrypted to encrypted before freeing it. Base the + * re-encryption on the same condition used for the decryption in + * sme_postprocess_startup(). Higher level abstractions, such as + * CC_ATTR_MEM_ENCRYPT, aren't necessarily equivalent in a Hyper-V VM + * using vTOM, where sme_me_mask is always zero. */ - if (cc_platform_has(CC_ATTR_MEM_ENCRYPT)) { + if (sme_me_mask) { r = set_memory_encrypted(vaddr, npages); if (r) { pr_warn("failed to free unused decrypted pages\n"); diff --git a/arch/x86/mm/mem_encrypt_identity.c b/arch/x86/mm/mem_encrypt_identity.c index 88cccd65029d..c6efcf559d88 100644 --- a/arch/x86/mm/mem_encrypt_identity.c +++ b/arch/x86/mm/mem_encrypt_identity.c @@ -600,7 +600,8 @@ void __init sme_enable(struct boot_params *bp) cmdline_ptr = (const char *)((u64)bp->hdr.cmd_line_ptr | ((u64)bp->ext_cmd_line_ptr << 32)); - cmdline_find_option(cmdline_ptr, cmdline_arg, buffer, sizeof(buffer)); + if (cmdline_find_option(cmdline_ptr, cmdline_arg, buffer, sizeof(buffer)) < 0) + return; if (!strncmp(buffer, cmdline_on, sizeof(buffer))) sme_me_mask = me_mask; diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c index 356758b7d4b4..7159cf787613 100644 --- a/arch/x86/mm/pat/set_memory.c +++ b/arch/x86/mm/pat/set_memory.c @@ -234,7 +234,7 @@ within_inclusive(unsigned long addr, unsigned long start, unsigned long end) * take full advantage of the the limited (s32) immediate addressing range (2G) * of x86_64. * - * See Documentation/x86/x86_64/mm.rst for more detail. + * See Documentation/arch/x86/x86_64/mm.rst for more detail. */ static inline unsigned long highmap_start_pfn(void) @@ -2175,9 +2175,6 @@ static int __set_memory_enc_pgtable(unsigned long addr, int numpages, bool enc) static int __set_memory_enc_dec(unsigned long addr, int numpages, bool enc) { - if (hv_is_isolation_supported()) - return hv_set_mem_host_visibility(addr, numpages, !enc); - if (cc_platform_has(CC_ATTR_MEM_ENCRYPT)) return __set_memory_enc_pgtable(addr, numpages, enc); diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 92d73ccede70..16c5292d227d 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -925,7 +925,7 @@ void flush_tlb_multi(const struct cpumask *cpumask, } /* - * See Documentation/x86/tlb.rst for details. We choose 33 + * See Documentation/arch/x86/tlb.rst for details. We choose 33 * because it is large enough to cover the vast majority (at * least 95%) of allocations, and is small enough that we are * confident it will not cause too much overhead. Each single diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index c6c46605812b..e3ec02e6ac9f 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -7,6 +7,7 @@ #include <linux/dmi.h> #include <linux/pci.h> #include <linux/vgaarb.h> +#include <asm/amd_nb.h> #include <asm/hpet.h> #include <asm/pci_x86.h> @@ -825,6 +826,26 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7910, rs690_fix_64bit_dma); #endif +#ifdef CONFIG_AMD_NB + +#define AMD_15B8_RCC_DEV2_EPF0_STRAP2 0x10136008 +#define AMD_15B8_RCC_DEV2_EPF0_STRAP2_NO_SOFT_RESET_DEV2_F0_MASK 0x00000080L + +static void quirk_clear_strap_no_soft_reset_dev2_f0(struct pci_dev *dev) +{ + u32 data; + + if (!amd_smn_read(0, AMD_15B8_RCC_DEV2_EPF0_STRAP2, &data)) { + data &= ~AMD_15B8_RCC_DEV2_EPF0_STRAP2_NO_SOFT_RESET_DEV2_F0_MASK; + if (amd_smn_write(0, AMD_15B8_RCC_DEV2_EPF0_STRAP2, data)) + pci_err(dev, "Failed to write data 0x%x\n", data); + } else { + pci_err(dev, "Failed to read data\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15b8, quirk_clear_strap_no_soft_reset_dev2_f0); +#endif + /* * When returning from D3cold to D0, firmware on some Google Coral and Reef * family Chromebooks with Intel Apollo Lake SoC clobbers the headers of diff --git a/arch/x86/platform/pvh/enlighten.c b/arch/x86/platform/pvh/enlighten.c index ed0442e35434..00a92cb2c814 100644 --- a/arch/x86/platform/pvh/enlighten.c +++ b/arch/x86/platform/pvh/enlighten.c @@ -86,7 +86,7 @@ static void __init init_pvh_bootparams(bool xen_guest) } /* - * See Documentation/x86/boot.rst. + * See Documentation/arch/x86/boot.rst. * * Version 2.12 supports Xen entry point but we will use default x86/PC * environment (i.e. hardware_subarch 0). diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile index 17f09dc26381..82fec66d46d2 100644 --- a/arch/x86/purgatory/Makefile +++ b/arch/x86/purgatory/Makefile @@ -69,8 +69,7 @@ CFLAGS_sha256.o += $(PURGATORY_CFLAGS) CFLAGS_REMOVE_string.o += $(PURGATORY_CFLAGS_REMOVE) CFLAGS_string.o += $(PURGATORY_CFLAGS) -AFLAGS_REMOVE_setup-x86_$(BITS).o += -Wa,-gdwarf-2 -AFLAGS_REMOVE_entry64.o += -Wa,-gdwarf-2 +asflags-remove-y += $(foreach x, -g -gdwarf-4 -gdwarf-5, $(x) -Wa,$(x)) $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE $(call if_changed,ld) diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3c5b52fbe4a7..a9ec8c9f5c5d 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -45,6 +45,6 @@ obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o -obj-$(CONFIG_XEN_PV_DOM0) += vga.o +obj-$(CONFIG_XEN_DOM0) += vga.o obj-$(CONFIG_XEN_EFI) += efi.o diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index bb59cc6ddb2d..093b78c8bbec 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -1390,7 +1390,8 @@ asmlinkage __visible void __init xen_start_kernel(struct start_info *si) x86_platform.set_legacy_features = xen_dom0_set_legacy_features; - xen_init_vga(info, xen_start_info->console.dom0.info_size); + xen_init_vga(info, xen_start_info->console.dom0.info_size, + &boot_params.screen_info); xen_start_info->console.domU.mfn = 0; xen_start_info->console.domU.evtchn = 0; diff --git a/arch/x86/xen/enlighten_pvh.c b/arch/x86/xen/enlighten_pvh.c index bcae606bbc5c..ada3868c02c2 100644 --- a/arch/x86/xen/enlighten_pvh.c +++ b/arch/x86/xen/enlighten_pvh.c @@ -43,6 +43,19 @@ void __init xen_pvh_init(struct boot_params *boot_params) x86_init.oem.banner = xen_banner; xen_efi_init(boot_params); + + if (xen_initial_domain()) { + struct xen_platform_op op = { + .cmd = XENPF_get_dom0_console, + }; + int ret = HYPERVISOR_platform_op(&op); + + if (ret > 0) + xen_init_vga(&op.u.dom0_console, + min(ret * sizeof(char), + sizeof(op.u.dom0_console)), + &boot_params->screen_info); + } } void __init mem_map_via_hcall(struct boot_params *boot_params_p) diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c index ee29fb558f2e..b3b8d289b9ab 100644 --- a/arch/x86/xen/mmu_pv.c +++ b/arch/x86/xen/mmu_pv.c @@ -885,14 +885,7 @@ void xen_mm_unpin_all(void) spin_unlock(&pgd_lock); } -static void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next) -{ - spin_lock(&next->page_table_lock); - xen_pgd_pin(next); - spin_unlock(&next->page_table_lock); -} - -static void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm) +static void xen_enter_mmap(struct mm_struct *mm) { spin_lock(&mm->page_table_lock); xen_pgd_pin(mm); @@ -2153,8 +2146,7 @@ static const typeof(pv_ops) xen_mmu_ops __initconst = { .make_p4d = PV_CALLEE_SAVE(xen_make_p4d), #endif - .activate_mm = xen_activate_mm, - .dup_mmap = xen_dup_mmap, + .enter_mmap = xen_enter_mmap, .exit_mmap = xen_exit_mmap, .lazy_mode = { diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 1d597364b49d..b74ac2562cfb 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -20,6 +20,7 @@ #include <asm/pvclock.h> #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> +#include <asm/xen/cpuid.h> #include <xen/events.h> #include <xen/features.h> @@ -503,11 +504,7 @@ static int __init xen_tsc_safe_clocksource(void) /* Leaf 4, sub-leaf 0 (0x40000x03) */ cpuid_count(xen_cpuid_base() + 3, 0, &eax, &ebx, &ecx, &edx); - /* tsc_mode = no_emulate (2) */ - if (ebx != 2) - return 0; - - return 1; + return ebx == XEN_CPUID_TSC_MODE_NEVER_EMULATE; } static void __init xen_time_init(void) diff --git a/arch/x86/xen/vga.c b/arch/x86/xen/vga.c index 14ea32e734d5..d97adab8420f 100644 --- a/arch/x86/xen/vga.c +++ b/arch/x86/xen/vga.c @@ -9,10 +9,9 @@ #include "xen-ops.h" -void __init xen_init_vga(const struct dom0_vga_console_info *info, size_t size) +void __init xen_init_vga(const struct dom0_vga_console_info *info, size_t size, + struct screen_info *screen_info) { - struct screen_info *screen_info = &boot_params.screen_info; - /* This is drawn from a dump from vgacon:startup in * standard Linux. */ screen_info->orig_video_mode = 3; diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index e36ea4268bd2..91f7a53519a7 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -49,7 +49,7 @@ SYM_CODE_START(startup_xen) ANNOTATE_NOENDBR cld - mov initial_stack(%rip), %rsp + leaq (__end_init_task - PTREGS_SIZE)(%rip), %rsp /* Set up %gs. * diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 9a8bb972193d..a10903785a33 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -108,11 +108,12 @@ static inline void xen_uninit_lock_cpu(int cpu) struct dom0_vga_console_info; -#ifdef CONFIG_XEN_PV_DOM0 -void __init xen_init_vga(const struct dom0_vga_console_info *, size_t size); +#ifdef CONFIG_XEN_DOM0 +void __init xen_init_vga(const struct dom0_vga_console_info *, size_t size, + struct screen_info *); #else static inline void __init xen_init_vga(const struct dom0_vga_console_info *info, - size_t size) + size_t size, struct screen_info *si) { } #endif diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h index 9793b49fc641..574795a20d6f 100644 --- a/arch/xtensa/include/asm/initialize_mmu.h +++ b/arch/xtensa/include/asm/initialize_mmu.h @@ -43,7 +43,7 @@ #if XCHAL_HAVE_S32C1I && (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0) /* * We Have Atomic Operation Control (ATOMCTL) Register; Initialize it. - * For details see Documentation/xtensa/atomctl.rst + * For details see Documentation/arch/xtensa/atomctl.rst */ #if XCHAL_DCACHE_IS_COHERENT movi a3, 0x25 /* For SMP/MX -- internal for writeback, diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index cd98366a9b23..f0a7d1c2641e 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -539,7 +539,7 @@ static size_t kstack_depth_to_print = CONFIG_PRINT_STACK_DEPTH; void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl) { - size_t len; + size_t len, off = 0; if (!sp) sp = stack_pointer(task); @@ -548,9 +548,17 @@ void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl) kstack_depth_to_print * STACK_DUMP_ENTRY_SIZE); printk("%sStack:\n", loglvl); - print_hex_dump(loglvl, " ", DUMP_PREFIX_NONE, - STACK_DUMP_LINE_SIZE, STACK_DUMP_ENTRY_SIZE, - sp, len, false); + while (off < len) { + u8 line[STACK_DUMP_LINE_SIZE]; + size_t line_len = len - off > STACK_DUMP_LINE_SIZE ? + STACK_DUMP_LINE_SIZE : len - off; + + __memcpy(line, (u8 *)sp + off, line_len); + print_hex_dump(loglvl, " ", DUMP_PREFIX_NONE, + STACK_DUMP_LINE_SIZE, STACK_DUMP_ENTRY_SIZE, + line, line_len, false); + off += STACK_DUMP_LINE_SIZE; + } show_trace(task, sp, loglvl); } |