diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/sh/Kconfig | 3 | ||||
-rw-r--r-- | arch/sh/boards/Kconfig | 7 | ||||
-rw-r--r-- | arch/sh/boards/Makefile | 1 | ||||
-rw-r--r-- | arch/sh/boards/mach-microdev/Makefile | 6 | ||||
-rw-r--r-- | arch/sh/boards/mach-microdev/fdc37c93xapm.c | 157 | ||||
-rw-r--r-- | arch/sh/boards/mach-microdev/io.c | 123 | ||||
-rw-r--r-- | arch/sh/boards/mach-microdev/irq.c | 150 | ||||
-rw-r--r-- | arch/sh/boards/mach-microdev/setup.c | 197 | ||||
-rw-r--r-- | arch/sh/configs/microdev_defconfig | 42 | ||||
-rw-r--r-- | arch/sh/include/mach-common/mach/microdev.h | 69 |
10 files changed, 1 insertions, 754 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 33530b044953..d3df67f215ca 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -124,8 +124,7 @@ config ARCH_HAS_ILOG2_U64 config NO_IOPORT_MAP def_bool !PCI - depends on !SH_SH4202_MICRODEV && !SH_SHMIN && !SH_HP6XX && \ - !SH_SOLUTION_ENGINE + depends on !SH_SHMIN && !SH_HP6XX && !SH_SOLUTION_ENGINE config IO_TRAPPED bool diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index fafe15d3ba1d..109bec4dad94 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -289,13 +289,6 @@ config SH_EDOSK7760 Select if configuring for a Renesas EDOSK7760 evaluation board. -config SH_SH4202_MICRODEV - bool "SH4-202 MicroDev" - depends on CPU_SUBTYPE_SH4_202 - help - Select SH4-202 MicroDev if configuring for a SuperH MicroDev board - with an SH4-202 CPU. - config SH_LANDISK bool "LANDISK" depends on CPU_SUBTYPE_SH7751R diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index b57219436ace..fbbc350ca854 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_SH_SDK7780) += mach-sdk7780/ obj-$(CONFIG_SH_SDK7786) += mach-sdk7786/ obj-$(CONFIG_SH_X3PROTO) += mach-x3proto/ obj-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp/ -obj-$(CONFIG_SH_SH4202_MICRODEV)+= mach-microdev/ obj-$(CONFIG_SH_LANDISK) += mach-landisk/ obj-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2/ obj-$(CONFIG_SH_RSK) += mach-rsk/ diff --git a/arch/sh/boards/mach-microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile deleted file mode 100644 index 05c5698dcad0..000000000000 --- a/arch/sh/boards/mach-microdev/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the SuperH MicroDev specific parts of the kernel -# - -obj-y := setup.o irq.o io.o fdc37c93xapm.o diff --git a/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/arch/sh/boards/mach-microdev/fdc37c93xapm.c deleted file mode 100644 index 2a04f72dd145..000000000000 --- a/arch/sh/boards/mach-microdev/fdc37c93xapm.c +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Setup for the SMSC FDC37C93xAPM - * - * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) - * Copyright (C) 2003, 2004 SuperH, Inc. - * Copyright (C) 2004, 2005 Paul Mundt - * - * SuperH SH4-202 MicroDev board support. - */ -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/err.h> -#include <mach/microdev.h> - -#define SMSC_CONFIG_PORT_ADDR (0x3F0) -#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR -#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1) - -#define SMSC_ENTER_CONFIG_KEY 0x55 -#define SMSC_EXIT_CONFIG_KEY 0xaa - -#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */ -#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */ -#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */ -#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */ -#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */ -#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */ -#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */ -#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */ -#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */ -#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */ - -#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */ -#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */ -#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */ -#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */ -#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */ -#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */ -#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */ - -#define SMSC_READ_INDEXED(index) ({ \ - outb((index), SMSC_INDEX_PORT_ADDR); \ - inb(SMSC_DATA_PORT_ADDR); }) -#define SMSC_WRITE_INDEXED(val, index) ({ \ - outb((index), SMSC_INDEX_PORT_ADDR); \ - outb((val), SMSC_DATA_PORT_ADDR); }) - -#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */ -#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */ -#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */ -#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */ - -#define SERIAL1_PRIMARY_BASE 0x03f8 -#define SERIAL2_PRIMARY_BASE 0x02f8 - -#define MSB(x) ( (x) >> 8 ) -#define LSB(x) ( (x) & 0xff ) - - /* General-Purpose base address on CPU-board FPGA */ -#define MICRODEV_FPGA_GP_BASE 0xa6100000ul - -static int __init smsc_superio_setup(void) -{ - - unsigned char devid, devrev; - - /* Initially the chip is in run state */ - /* Put it into configuration state */ - outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - - /* Read device ID info */ - devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX); - devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX); - - if ((devid == 0x30) && (devrev == 0x01)) - printk("SMSC FDC37C93xAPM SuperIO device detected\n"); - else - return -ENODEV; - - /* Select the keyboard device */ - SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); - /* enable it */ - SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - /* enable the interrupts */ - SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX); - SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX); - - /* Select the Serial #1 device */ - SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX); - /* enable it */ - SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - /* program with port addresses */ - SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); - SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); - SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX); - /* enable the interrupts */ - SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX); - - /* Select the Serial #2 device */ - SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX); - /* enable it */ - SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - /* program with port addresses */ - SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); - SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); - SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX); - /* enable the interrupts */ - SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX); - - /* Select the IDE#1 device */ - SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); - /* enable it */ - SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - /* program with port addresses */ - SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); - SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); - SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0); - SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1); - SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX); - SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX); - /* select the interrupt */ - SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX); - - /* Select the IDE#2 device */ - SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX); - /* enable it */ - SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - /* program with port addresses */ - SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); - SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); - SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0); - SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1); - /* select the interrupt */ - SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX); - - /* Select the configuration registers */ - SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX); - /* enable the appropriate GPIO pins for IDE functionality: - * bit[0] In/Out 1==input; 0==output - * bit[1] Polarity 1==invert; 0==no invert - * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable - * bit[3:4] Function Select 00==original; 01==Alternate Function #1 - */ - SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ - SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ - SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ - SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ - SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */ - - /* Exit the configuration state */ - outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - - return 0; -} -device_initcall(smsc_superio_setup); diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c deleted file mode 100644 index a76c12721e63..000000000000 --- a/arch/sh/boards/mach-microdev/io.c +++ /dev/null @@ -1,123 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/sh/boards/superh/microdev/io.c - * - * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) - * Copyright (C) 2003, 2004 SuperH, Inc. - * Copyright (C) 2004 Paul Mundt - * - * SuperH SH4-202 MicroDev board support. - */ - -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/wait.h> -#include <asm/io.h> -#include <mach/microdev.h> - - /* - * we need to have a 'safe' address to re-direct all I/O requests - * that we do not explicitly wish to handle. This safe address - * must have the following properies: - * - * * writes are ignored (no exception) - * * reads are benign (no side-effects) - * * accesses of width 1, 2 and 4-bytes are all valid. - * - * The Processor Version Register (PVR) has these properties. - */ -#define PVR 0xff000030 /* Processor Version Register */ - - -#define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */ -#define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */ -#define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */ -#define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */ -#define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */ -#define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */ -#define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */ -#define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */ -#define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */ - -#define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */ -#define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */ -#define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */ -#define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */ -#define IO_SERIAL_EXTENT 0x10ul - -#define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */ -#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */ -#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */ - -/* - * map I/O ports to memory-mapped addresses - */ -void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len) -{ - unsigned long result; - - if ((offset >= IO_LAN91C111_BASE) && - (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { - /* - * SMSC LAN91C111 Ethernet chip - */ - result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE; - } else if ((offset >= IO_SUPERIO_BASE) && - (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * Configuration Registers - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if (((offset >= IO_IDE1_BASE) && - (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) || - (offset == IO_IDE1_MISC)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * IDE #1 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if (((offset >= IO_IDE2_BASE) && - (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) || - (offset == IO_IDE2_MISC)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * IDE #2 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if ((offset >= IO_SERIAL1_BASE) && - (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * Serial #1 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if ((offset >= IO_SERIAL2_BASE) && - (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * Serial #2 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if ((offset >= IO_ISP1161_BASE) && - (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) { - /* - * Philips USB ISP1161x chip - */ - result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE; - } else { - /* - * safe default. - */ - printk("Warning: unexpected port in %s( offset = 0x%lx )\n", - __func__, offset); - result = PVR; - } - - return (void __iomem *)result; -} diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c deleted file mode 100644 index dc27492c83d7..000000000000 --- a/arch/sh/boards/mach-microdev/irq.c +++ /dev/null @@ -1,150 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/boards/superh/microdev/irq.c - * - * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) - * - * SuperH SH4-202 MicroDev board support. - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <asm/io.h> -#include <mach/microdev.h> - -#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */ - -static const struct { - unsigned char fpgaIrq; - unsigned char mapped; - const char *name; -} fpgaIrqTable[NUM_EXTERNAL_IRQS] = { - { 0, 0, "unused" }, /* IRQ #0 IRL=15 0x200 */ - { MICRODEV_FPGA_IRQ_KEYBOARD, 1, "keyboard" }, /* IRQ #1 IRL=14 0x220 */ - { MICRODEV_FPGA_IRQ_SERIAL1, 1, "Serial #1"}, /* IRQ #2 IRL=13 0x240 */ - { MICRODEV_FPGA_IRQ_ETHERNET, 1, "Ethernet" }, /* IRQ #3 IRL=12 0x260 */ - { MICRODEV_FPGA_IRQ_SERIAL2, 0, "Serial #2"}, /* IRQ #4 IRL=11 0x280 */ - { 0, 0, "unused" }, /* IRQ #5 IRL=10 0x2a0 */ - { 0, 0, "unused" }, /* IRQ #6 IRL=9 0x2c0 */ - { MICRODEV_FPGA_IRQ_USB_HC, 1, "USB" }, /* IRQ #7 IRL=8 0x2e0 */ - { MICRODEV_IRQ_PCI_INTA, 1, "PCI INTA" }, /* IRQ #8 IRL=7 0x300 */ - { MICRODEV_IRQ_PCI_INTB, 1, "PCI INTB" }, /* IRQ #9 IRL=6 0x320 */ - { MICRODEV_IRQ_PCI_INTC, 1, "PCI INTC" }, /* IRQ #10 IRL=5 0x340 */ - { MICRODEV_IRQ_PCI_INTD, 1, "PCI INTD" }, /* IRQ #11 IRL=4 0x360 */ - { MICRODEV_FPGA_IRQ_MOUSE, 1, "mouse" }, /* IRQ #12 IRL=3 0x380 */ - { MICRODEV_FPGA_IRQ_IDE2, 1, "IDE #2" }, /* IRQ #13 IRL=2 0x3a0 */ - { MICRODEV_FPGA_IRQ_IDE1, 1, "IDE #1" }, /* IRQ #14 IRL=1 0x3c0 */ - { 0, 0, "unused" }, /* IRQ #15 IRL=0 0x3e0 */ -}; - -#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1) -# error Inconsistancy in defining the IRQ# for Keyboard! -#endif - -#if (MICRODEV_LINUX_IRQ_ETHERNET != 3) -# error Inconsistancy in defining the IRQ# for Ethernet! -#endif - -#if (MICRODEV_LINUX_IRQ_USB_HC != 7) -# error Inconsistancy in defining the IRQ# for USB! -#endif - -#if (MICRODEV_LINUX_IRQ_MOUSE != 12) -# error Inconsistancy in defining the IRQ# for PS/2 Mouse! -#endif - -#if (MICRODEV_LINUX_IRQ_IDE2 != 13) -# error Inconsistancy in defining the IRQ# for secondary IDE! -#endif - -#if (MICRODEV_LINUX_IRQ_IDE1 != 14) -# error Inconsistancy in defining the IRQ# for primary IDE! -#endif - -static void disable_microdev_irq(struct irq_data *data) -{ - unsigned int irq = data->irq; - unsigned int fpgaIrq; - - if (irq >= NUM_EXTERNAL_IRQS) - return; - if (!fpgaIrqTable[irq].mapped) - return; - - fpgaIrq = fpgaIrqTable[irq].fpgaIrq; - - /* disable interrupts on the FPGA INTC register */ - __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); -} - -static void enable_microdev_irq(struct irq_data *data) -{ - unsigned int irq = data->irq; - unsigned long priorityReg, priorities, pri; - unsigned int fpgaIrq; - - if (unlikely(irq >= NUM_EXTERNAL_IRQS)) - return; - if (unlikely(!fpgaIrqTable[irq].mapped)) - return; - - pri = 15 - irq; - - fpgaIrq = fpgaIrqTable[irq].fpgaIrq; - priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq); - - /* set priority for the interrupt */ - priorities = __raw_readl(priorityReg); - priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq); - priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri); - __raw_writel(priorities, priorityReg); - - /* enable interrupts on the FPGA INTC register */ - __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); -} - -static struct irq_chip microdev_irq_type = { - .name = "MicroDev-IRQ", - .irq_unmask = enable_microdev_irq, - .irq_mask = disable_microdev_irq, -}; - -/* This function sets the desired irq handler to be a MicroDev type */ -static void __init make_microdev_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_set_chip_and_handler(irq, µdev_irq_type, handle_level_irq); - disable_microdev_irq(irq_get_irq_data(irq)); -} - -extern void __init init_microdev_irq(void) -{ - int i; - - /* disable interrupts on the FPGA INTC register */ - __raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG); - - for (i = 0; i < NUM_EXTERNAL_IRQS; i++) - make_microdev_irq(i); -} - -extern void microdev_print_fpga_intc_status(void) -{ - volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG; - volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG; - volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0); - volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8); - volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16); - volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24); - volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG; - volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG; - - printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n"); - printk("FPGA_INTENB = 0x%08x\n", *intenb); - printk("FPGA_INTDSB = 0x%08x\n", *intdsb); - printk("FPGA_INTSRC = 0x%08x\n", *intsrc); - printk("FPGA_INTREQ = 0x%08x\n", *intreq); - printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria); - printk("-------------------------------------------------------------------------------\n"); -} diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c deleted file mode 100644 index f4a777fe2d01..000000000000 --- a/arch/sh/boards/mach-microdev/setup.c +++ /dev/null @@ -1,197 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/boards/superh/microdev/setup.c - * - * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) - * Copyright (C) 2003, 2004 SuperH, Inc. - * Copyright (C) 2004, 2005 Paul Mundt - * - * SuperH SH4-202 MicroDev board support. - */ -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ioport.h> -#include <video/s1d13xxxfb.h> -#include <mach/microdev.h> -#include <asm/io.h> -#include <asm/machvec.h> -#include <linux/sizes.h> - -static struct resource smc91x_resources[] = { - [0] = { - .start = 0x300, - .end = 0x300 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MICRODEV_LINUX_IRQ_ETHERNET, - .end = MICRODEV_LINUX_IRQ_ETHERNET, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct s1d13xxxfb_regval s1d13806_initregs[] = { - { S1DREG_MISC, 0x00 }, - { S1DREG_COM_DISP_MODE, 0x00 }, - { S1DREG_GPIO_CNF0, 0x00 }, - { S1DREG_GPIO_CNF1, 0x00 }, - { S1DREG_GPIO_CTL0, 0x00 }, - { S1DREG_GPIO_CTL1, 0x00 }, - { S1DREG_CLK_CNF, 0x02 }, - { S1DREG_LCD_CLK_CNF, 0x01 }, - { S1DREG_CRT_CLK_CNF, 0x03 }, - { S1DREG_MPLUG_CLK_CNF, 0x03 }, - { S1DREG_CPU2MEM_WST_SEL, 0x02 }, - { S1DREG_SDRAM_REF_RATE, 0x03 }, - { S1DREG_SDRAM_TC0, 0x00 }, - { S1DREG_SDRAM_TC1, 0x01 }, - { S1DREG_MEM_CNF, 0x80 }, - { S1DREG_PANEL_TYPE, 0x25 }, - { S1DREG_MOD_RATE, 0x00 }, - { S1DREG_LCD_DISP_HWIDTH, 0x63 }, - { S1DREG_LCD_NDISP_HPER, 0x1e }, - { S1DREG_TFT_FPLINE_START, 0x06 }, - { S1DREG_TFT_FPLINE_PWIDTH, 0x03 }, - { S1DREG_LCD_DISP_VHEIGHT0, 0x57 }, - { S1DREG_LCD_DISP_VHEIGHT1, 0x02 }, - { S1DREG_LCD_NDISP_VPER, 0x00 }, - { S1DREG_TFT_FPFRAME_START, 0x0a }, - { S1DREG_TFT_FPFRAME_PWIDTH, 0x81 }, - { S1DREG_LCD_DISP_MODE, 0x03 }, - { S1DREG_LCD_MISC, 0x00 }, - { S1DREG_LCD_DISP_START0, 0x00 }, - { S1DREG_LCD_DISP_START1, 0x00 }, - { S1DREG_LCD_DISP_START2, 0x00 }, - { S1DREG_LCD_MEM_OFF0, 0x90 }, - { S1DREG_LCD_MEM_OFF1, 0x01 }, - { S1DREG_LCD_PIX_PAN, 0x00 }, - { S1DREG_LCD_DISP_FIFO_HTC, 0x00 }, - { S1DREG_LCD_DISP_FIFO_LTC, 0x00 }, - { S1DREG_CRT_DISP_HWIDTH, 0x63 }, - { S1DREG_CRT_NDISP_HPER, 0x1f }, - { S1DREG_CRT_HRTC_START, 0x04 }, - { S1DREG_CRT_HRTC_PWIDTH, 0x8f }, - { S1DREG_CRT_DISP_VHEIGHT0, 0x57 }, - { S1DREG_CRT_DISP_VHEIGHT1, 0x02 }, - { S1DREG_CRT_NDISP_VPER, 0x1b }, - { S1DREG_CRT_VRTC_START, 0x00 }, - { S1DREG_CRT_VRTC_PWIDTH, 0x83 }, - { S1DREG_TV_OUT_CTL, 0x10 }, - { S1DREG_CRT_DISP_MODE, 0x05 }, - { S1DREG_CRT_DISP_START0, 0x00 }, - { S1DREG_CRT_DISP_START1, 0x00 }, - { S1DREG_CRT_DISP_START2, 0x00 }, - { S1DREG_CRT_MEM_OFF0, 0x20 }, - { S1DREG_CRT_MEM_OFF1, 0x03 }, - { S1DREG_CRT_PIX_PAN, 0x00 }, - { S1DREG_CRT_DISP_FIFO_HTC, 0x00 }, - { S1DREG_CRT_DISP_FIFO_LTC, 0x00 }, - { S1DREG_LCD_CUR_CTL, 0x00 }, - { S1DREG_LCD_CUR_START, 0x01 }, - { S1DREG_LCD_CUR_XPOS0, 0x00 }, - { S1DREG_LCD_CUR_XPOS1, 0x00 }, - { S1DREG_LCD_CUR_YPOS0, 0x00 }, - { S1DREG_LCD_CUR_YPOS1, 0x00 }, - { S1DREG_LCD_CUR_BCTL0, 0x00 }, - { S1DREG_LCD_CUR_GCTL0, 0x00 }, - { S1DREG_LCD_CUR_RCTL0, 0x00 }, - { S1DREG_LCD_CUR_BCTL1, 0x1f }, - { S1DREG_LCD_CUR_GCTL1, 0x3f }, - { S1DREG_LCD_CUR_RCTL1, 0x1f }, - { S1DREG_LCD_CUR_FIFO_HTC, 0x00 }, - { S1DREG_CRT_CUR_CTL, 0x00 }, - { S1DREG_CRT_CUR_START, 0x01 }, - { S1DREG_CRT_CUR_XPOS0, 0x00 }, - { S1DREG_CRT_CUR_XPOS1, 0x00 }, - { S1DREG_CRT_CUR_YPOS0, 0x00 }, - { S1DREG_CRT_CUR_YPOS1, 0x00 }, - { S1DREG_CRT_CUR_BCTL0, 0x00 }, - { S1DREG_CRT_CUR_GCTL0, 0x00 }, - { S1DREG_CRT_CUR_RCTL0, 0x00 }, - { S1DREG_CRT_CUR_BCTL1, 0x1f }, - { S1DREG_CRT_CUR_GCTL1, 0x3f }, - { S1DREG_CRT_CUR_RCTL1, 0x1f }, - { S1DREG_CRT_CUR_FIFO_HTC, 0x00 }, - { S1DREG_BBLT_CTL0, 0x00 }, - { S1DREG_BBLT_CTL1, 0x00 }, - { S1DREG_BBLT_CC_EXP, 0x00 }, - { S1DREG_BBLT_OP, 0x00 }, - { S1DREG_BBLT_SRC_START0, 0x00 }, - { S1DREG_BBLT_SRC_START1, 0x00 }, - { S1DREG_BBLT_SRC_START2, 0x00 }, - { S1DREG_BBLT_DST_START0, 0x00 }, - { S1DREG_BBLT_DST_START1, 0x00 }, - { S1DREG_BBLT_DST_START2, 0x00 }, - { S1DREG_BBLT_MEM_OFF0, 0x00 }, - { S1DREG_BBLT_MEM_OFF1, 0x00 }, - { S1DREG_BBLT_WIDTH0, 0x00 }, - { S1DREG_BBLT_WIDTH1, 0x00 }, - { S1DREG_BBLT_HEIGHT0, 0x00 }, - { S1DREG_BBLT_HEIGHT1, 0x00 }, - { S1DREG_BBLT_BGC0, 0x00 }, - { S1DREG_BBLT_BGC1, 0x00 }, - { S1DREG_BBLT_FGC0, 0x00 }, - { S1DREG_BBLT_FGC1, 0x00 }, - { S1DREG_LKUP_MODE, 0x00 }, - { S1DREG_LKUP_ADDR, 0x00 }, - { S1DREG_PS_CNF, 0x10 }, - { S1DREG_PS_STATUS, 0x00 }, - { S1DREG_CPU2MEM_WDOGT, 0x00 }, - { S1DREG_COM_DISP_MODE, 0x02 }, -}; - -static struct s1d13xxxfb_pdata s1d13806_platform_data = { - .initregs = s1d13806_initregs, - .initregssize = ARRAY_SIZE(s1d13806_initregs), -}; - -static struct resource s1d13806_resources[] = { - [0] = { - .start = 0x07200000, - .end = 0x07200000 + SZ_2M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x07000000, - .end = 0x07000000 + SZ_2M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device s1d13806_device = { - .name = "s1d13806fb", - .id = -1, - .num_resources = ARRAY_SIZE(s1d13806_resources), - .resource = s1d13806_resources, - - .dev = { - .platform_data = &s1d13806_platform_data, - }, -}; - -static struct platform_device *microdev_devices[] __initdata = { - &smc91x_device, - &s1d13806_device, -}; - -static int __init microdev_devices_setup(void) -{ - return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices)); -} -device_initcall(microdev_devices_setup); - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_sh4202_microdev __initmv = { - .mv_name = "SH4-202 MicroDev", - .mv_ioport_map = microdev_ioport_map, - .mv_init_irq = init_microdev_irq, -}; diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig deleted file mode 100644 index 39a83d832cac..000000000000 --- a/arch/sh/configs/microdev_defconfig +++ /dev/null @@ -1,42 +0,0 @@ -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_BLK_DEV_BSG is not set -CONFIG_CPU_SUBTYPE_SH4_202=y -CONFIG_FLATMEM_MANUAL=y -CONFIG_SH_SH4202_MICRODEV=y -CONFIG_SH_DMA=y -CONFIG_SH_DMA_API=y -CONFIG_HEARTBEAT=y -CONFIG_PREEMPT=y -CONFIG_CMDLINE_OVERWRITE=y -CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1" -CONFIG_SUPERHYWAY=y -CONFIG_NET=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_IPV6 is not set -# CONFIG_FW_LOADER is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_VFAT_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_CRYPTO_ECB=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/sh/include/mach-common/mach/microdev.h b/arch/sh/include/mach-common/mach/microdev.h deleted file mode 100644 index 0e2f9ab11976..000000000000 --- a/arch/sh/include/mach-common/mach/microdev.h +++ /dev/null @@ -1,69 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * linux/include/asm-sh/microdev.h - * - * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) - * - * Definitions for the SuperH SH4-202 MicroDev board. - */ -#ifndef __ASM_SH_MICRODEV_H -#define __ASM_SH_MICRODEV_H - -extern void init_microdev_irq(void); -extern void microdev_print_fpga_intc_status(void); - -/* - * The following are useful macros for manipulating the interrupt - * controller (INTC) on the CPU-board FPGA. should be noted that there - * is an INTC on the FPGA, and a separate INTC on the SH4-202 core - - * these are two different things, both of which need to be prorammed to - * correctly route - unfortunately, they have the same name and - * abbreviations! - */ -#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ -#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */ -#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */ -#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */ - - -/* - * The following are the IRQ numbers for the Linux Kernel for external - * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'. - */ -#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ -#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */ -#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */ -#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ -#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */ -#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ -#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */ -#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */ - -/* - * The following are the IRQ numbers for the INTC on the FPGA for - * external interrupts. i.e. the bits in the INTC registers in the - * FPGA. - */ -#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ -#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */ -#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ -#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ -#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */ -#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */ -#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */ -#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */ - -#define MICRODEV_IRQ_PCI_INTA 8 -#define MICRODEV_IRQ_PCI_INTB 9 -#define MICRODEV_IRQ_PCI_INTC 10 -#define MICRODEV_IRQ_PCI_INTD 11 - -#define __IO_PREFIX microdev -#include <asm/io_generic.h> - -#endif /* __ASM_SH_MICRODEV_H */ |