summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/am335x-icev2.dts2
-rw-r--r--arch/arm/boot/dts/am33xx-l4.dtsi6
-rw-r--r--arch/arm/boot/dts/am4372.dtsi2
-rw-r--r--arch/arm/boot/dts/dra7-l4.dtsi48
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dtsi1
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi11
-rw-r--r--arch/arm/configs/davinci_all_defconfig2
-rw-r--r--arch/arm/configs/multi_v7_defconfig4
-rw-r--r--arch/arm/configs/omap2plus_defconfig5
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_data.c5
-rw-r--r--arch/arm/mach-omap2/pm.c100
-rw-r--r--arch/arm64/configs/defconfig2
13 files changed, 50 insertions, 141 deletions
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 18f70b35da4c..204bccfcc110 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -432,7 +432,7 @@
pinctrl-0 = <&mmc0_pins_default>;
};
-&gpio0 {
+&gpio0_target {
/* Do not idle the GPIO used for holding the VTT regulator */
ti,no-reset-on-init;
ti,no-idle-on-init;
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 9915c891e05f..7a9eb2b0d45b 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -127,7 +127,7 @@
ranges = <0x0 0x5000 0x1000>;
};
- target-module@7000 { /* 0x44e07000, ap 14 20.0 */
+ gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio1";
reg = <0x7000 0x4>,
@@ -2038,7 +2038,9 @@
reg = <0xe000 0x4>,
<0xe054 0x4>;
reg-names = "rev", "sysc";
- ti,sysc-midle ;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 848e2a8884e2..14bbc438055f 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -337,6 +337,8 @@
ti,hwmods = "dss_dispc";
clocks = <&disp_clk>;
clock-names = "fck";
+
+ max-memory-bandwidth = <230000000>;
};
rfbi: rfbi@4832a800 {
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index ea0e7c19eb4e..5cac2dd58241 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -2732,7 +2732,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
dma-names = "tx", "rx";
- clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>,
+ clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
<&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
<&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
@@ -2768,8 +2768,8 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
dma-names = "tx", "rx";
- clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>,
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
+ <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
status = "disabled";
@@ -2786,9 +2786,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x68000 0x2000>,
@@ -2804,7 +2803,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
dma-names = "tx", "rx";
- clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>,
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
@@ -2821,9 +2820,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x6c000 0x2000>,
@@ -2839,7 +2837,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
dma-names = "tx", "rx";
- clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>,
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
@@ -2856,9 +2854,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x70000 0x2000>,
@@ -2874,7 +2871,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
dma-names = "tx", "rx";
- clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>,
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
@@ -2891,9 +2888,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x74000 0x2000>,
@@ -2909,7 +2905,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
dma-names = "tx", "rx";
- clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>,
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
@@ -2926,9 +2922,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x78000 0x2000>,
@@ -2944,7 +2939,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
dma-names = "tx", "rx";
- clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>,
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
@@ -2961,9 +2956,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x7c000 0x2000>,
@@ -2979,7 +2973,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
dma-names = "tx", "rx";
- clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>,
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index d01fc8744fd7..b6ef1a7ac8a4 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -124,6 +124,7 @@
spi-max-frequency = <100000>;
spi-cpol;
spi-cpha;
+ spi-cs-high;
backlight= <&backlight>;
label = "lcd";
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index a53657b83288..bda454d12150 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/mfd/dbx500-prcmu.h>
#include <dt-bindings/arm/ux500_pm_domains.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <1>;
@@ -59,8 +60,12 @@
* cooling.
*/
cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ /*
+ * This sensor fires interrupts to update the thermal
+ * zone, so no polling is needed.
+ */
+ polling-delay = <0>;
thermal-sensors = <&thermal>;
@@ -79,7 +84,7 @@
cooling-maps {
trip = <&cpu_alert>;
- cooling-device = <&CPU0 0 2>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <100>;
};
};
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index b34970ce6b31..01e3c0f4be92 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -228,7 +228,7 @@ CONFIG_RTC_DRV_OMAP=m
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_COMMON_CLK_PWM=m
-CONFIG_REMOTEPROC=m
+CONFIG_REMOTEPROC=y
CONFIG_DA8XX_REMOTEPROC=m
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=m
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 13ba53286901..e4c8def9a0a5 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -415,7 +415,7 @@ CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_STM32=m
-CONFIG_SPI_STM32_QSPI=m
+CONFIG_SPI_STM32_QSPI=y
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
CONFIG_SPI_TEGRA114=y
@@ -933,7 +933,7 @@ CONFIG_BCM2835_MBOX=y
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
-CONFIG_REMOTEPROC=m
+CONFIG_REMOTEPROC=y
CONFIG_ST_REMOTEPROC=m
CONFIG_RPMSG_VIRTIO=m
CONFIG_ASPEED_LPC_CTRL=m
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 64eb896907bf..d3f50971e451 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -364,6 +364,7 @@ CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
CONFIG_DRM_TILCDC=m
CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_TI_TFP410=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
@@ -423,6 +424,7 @@ CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_TEST=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_AM335X_PHY_USB=m
@@ -460,6 +462,7 @@ CONFIG_MMC_SDHCI_OMAP=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_CPCAP=m
+CONFIG_LEDS_LM3532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_PWM=m
@@ -481,7 +484,7 @@ CONFIG_RTC_DRV_OMAP=m
CONFIG_RTC_DRV_CPCAP=m
CONFIG_DMADEVICES=y
CONFIG_OMAP_IOMMU=y
-CONFIG_REMOTEPROC=m
+CONFIG_REMOTEPROC=y
CONFIG_OMAP_REMOTEPROC=m
CONFIG_WKUP_M3_RPROC=m
CONFIG_SOC_TI=y
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index dd939e1325c6..29fd13684a68 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -763,7 +763,8 @@ static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+ .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_RESET_STATUS,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type2,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 2bcb6345b873..54524775f278 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -231,8 +231,9 @@ static struct omap_hwmod am33xx_control_hwmod = {
static struct omap_hwmod_class_sysconfig lcdc_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x54,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE,
+ .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART,
.sysc_fields = &omap_hwmod_sysc_type2,
};
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 1fde1bf53fb6..7ac9af56762d 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -74,83 +74,6 @@ int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
return 0;
}
-/*
- * This API is to be called during init to set the various voltage
- * domains to the voltage as per the opp table. Typically we boot up
- * at the nominal voltage. So this function finds out the rate of
- * the clock associated with the voltage domain, finds out the correct
- * opp entry and sets the voltage domain to the voltage specified
- * in the opp entry
- */
-static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
- const char *oh_name)
-{
- struct voltagedomain *voltdm;
- struct clk *clk;
- struct dev_pm_opp *opp;
- unsigned long freq, bootup_volt;
- struct device *dev;
-
- if (!vdd_name || !clk_name || !oh_name) {
- pr_err("%s: invalid parameters\n", __func__);
- goto exit;
- }
-
- if (!strncmp(oh_name, "mpu", 3))
- /*
- * All current OMAPs share voltage rail and clock
- * source, so CPU0 is used to represent the MPU-SS.
- */
- dev = get_cpu_device(0);
- else
- dev = omap_device_get_by_hwmod_name(oh_name);
-
- if (IS_ERR(dev)) {
- pr_err("%s: Unable to get dev pointer for hwmod %s\n",
- __func__, oh_name);
- goto exit;
- }
-
- voltdm = voltdm_lookup(vdd_name);
- if (!voltdm) {
- pr_err("%s: unable to get vdd pointer for vdd_%s\n",
- __func__, vdd_name);
- goto exit;
- }
-
- clk = clk_get(NULL, clk_name);
- if (IS_ERR(clk)) {
- pr_err("%s: unable to get clk %s\n", __func__, clk_name);
- goto exit;
- }
-
- freq = clk_get_rate(clk);
- clk_put(clk);
-
- opp = dev_pm_opp_find_freq_ceil(dev, &freq);
- if (IS_ERR(opp)) {
- pr_err("%s: unable to find boot up OPP for vdd_%s\n",
- __func__, vdd_name);
- goto exit;
- }
-
- bootup_volt = dev_pm_opp_get_voltage(opp);
- dev_pm_opp_put(opp);
-
- if (!bootup_volt) {
- pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
- __func__, vdd_name);
- goto exit;
- }
-
- voltdm_scale(voltdm, bootup_volt);
- return 0;
-
-exit:
- pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
- return -EINVAL;
-}
-
#ifdef CONFIG_SUSPEND
static int omap_pm_enter(suspend_state_t suspend_state)
{
@@ -208,25 +131,6 @@ void omap_common_suspend_init(void *pm_suspend)
}
#endif /* CONFIG_SUSPEND */
-static void __init omap3_init_voltages(void)
-{
- if (!soc_is_omap34xx())
- return;
-
- omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
- omap2_set_init_voltage("core", "l3_ick", "l3_main");
-}
-
-static void __init omap4_init_voltages(void)
-{
- if (!soc_is_omap44xx())
- return;
-
- omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
- omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
- omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
-}
-
int __maybe_unused omap_pm_nop_init(void)
{
return 0;
@@ -246,10 +150,6 @@ int __init omap2_common_pm_late_init(void)
omap4_twl_init();
omap_voltage_late_init();
- /* Initialize the voltages */
- omap3_init_voltages();
- omap4_init_voltages();
-
/* Smartreflex device init */
omap_devinit_smartreflex();
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 8e05c39eab08..c9a867ac32d4 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -723,7 +723,7 @@ CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_V3=y
CONFIG_QCOM_IOMMU=y
-CONFIG_REMOTEPROC=m
+CONFIG_REMOTEPROC=y
CONFIG_QCOM_Q6V5_MSS=m
CONFIG_QCOM_Q6V5_PAS=m
CONFIG_QCOM_SYSMON=m