summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig34
-rw-r--r--arch/arm/boot/compressed/head.S2
-rw-r--r--arch/arm/boot/compressed/vmlinux.lds.in2
-rw-r--r--arch/arm/common/gic.c28
-rw-r--r--arch/arm/include/asm/assembler.h2
-rw-r--r--arch/arm/include/asm/hardware/it8152.h2
-rw-r--r--arch/arm/include/asm/mmu.h4
-rw-r--r--arch/arm/include/asm/pgtable.h3
-rw-r--r--arch/arm/kernel/hw_breakpoint.c3
-rw-r--r--arch/arm/kernel/perf_event.c2
-rw-r--r--arch/arm/kernel/stacktrace.c2
-rw-r--r--arch/arm/kernel/traps.c5
-rw-r--r--arch/arm/kernel/unwind.c2
-rw-r--r--arch/arm/lib/findbit.S6
-rw-r--r--arch/arm/mach-aaec2000/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-bcmring/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-clps711x/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-davinci/dm355.c6
-rw-r--r--arch/arm/mach-davinci/dm365.c6
-rw-r--r--arch/arm/mach-davinci/dm644x.c4
-rw-r--r--arch/arm/mach-ebsa110/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-ep93xx/include/mach/dma.h111
-rw-r--r--arch/arm/mach-footbridge/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-h720x/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-imx/eukrea_mbimx27-baseboard.c6
-rw-r--r--arch/arm/mach-integrator/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-kirkwood/common.c7
-rw-r--r--arch/arm/mach-kirkwood/d2net_v2-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/lacie_v2-common.c14
-rw-r--r--arch/arm/mach-kirkwood/lacie_v2-common.h2
-rw-r--r--arch/arm/mach-kirkwood/mpp.c4
-rw-r--r--arch/arm/mach-kirkwood/netspace_v2-setup.c6
-rw-r--r--arch/arm/mach-kirkwood/netxbig_v2-setup.c4
-rw-r--r--arch/arm/mach-kirkwood/ts41x-setup.c14
-rw-r--r--arch/arm/mach-mmp/include/mach/cputype.h3
-rw-r--r--arch/arm/mach-msm/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-mv78xx0/mpp.c4
-rw-r--r--arch/arm/mach-mx25/devices-imx25.h4
-rw-r--r--arch/arm/mach-mx3/mach-pcm037_eet.c5
-rw-r--r--arch/arm/mach-netx/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-omap1/devices.c5
-rw-r--r--arch/arm/mach-omap1/include/mach/camera.h2
-rw-r--r--arch/arm/mach-omap1/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c3
-rw-r--r--arch/arm/mach-omap2/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-orion5x/mpp.c4
-rw-r--r--arch/arm/mach-orion5x/ts78xx-setup.c2
-rw-r--r--arch/arm/mach-pnx4008/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c2
-rw-r--r--arch/arm/mach-pxa/saar.c2
-rw-r--r--arch/arm/mach-rpc/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-s3c2410/h1940-bluetooth.c8
-rw-r--r--arch/arm/mach-s3c2416/irq.c5
-rw-r--r--arch/arm/mach-s3c2443/irq.c5
-rw-r--r--arch/arm/mach-s3c64xx/Kconfig2
-rw-r--r--arch/arm/mach-s3c64xx/mach-mini6410.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-real6410.c2
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkc110.c1
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c1
-rw-r--r--arch/arm/mach-shark/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-shmobile/Kconfig2
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c52
-rw-r--r--arch/arm/mach-shmobile/clock-sh7372.c104
-rw-r--r--arch/arm/mach-shmobile/include/mach/gpio.h4
-rw-r--r--arch/arm/mach-shmobile/include/mach/sh7372.h2
-rw-r--r--arch/arm/mach-shmobile/intc-sh7372.c2
-rw-r--r--arch/arm/mach-ux500/cpu.c6
-rw-r--r--arch/arm/mach-versatile/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-vexpress/ct-ca9x4.c2
-rw-r--r--arch/arm/mm/dma-mapping.c2
-rw-r--r--arch/arm/mm/ioremap.c4
-rw-r--r--arch/arm/plat-mxc/devices/platform-imx-dma.c8
-rw-r--r--arch/arm/plat-mxc/devices/platform-spi_imx.c1
-rw-r--r--arch/arm/plat-nomadik/timer.c89
-rw-r--r--arch/arm/plat-omap/devices.c4
-rw-r--r--arch/arm/plat-omap/dma.c2
-rw-r--r--arch/arm/plat-orion/include/plat/pcie.h3
-rw-r--r--arch/arm/plat-orion/pcie.c5
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c6
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c6
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c6
-rw-r--r--arch/blackfin/kernel/process.c1
-rw-r--r--arch/frv/kernel/process.c1
-rw-r--r--arch/h8300/kernel/process.c1
-rw-r--r--arch/ia64/hp/sim/simscsi.c4
-rw-r--r--arch/m68k/kernel/process.c1
-rw-r--r--arch/m68knommu/kernel/process.c1
-rw-r--r--arch/mn10300/kernel/process.c1
-rw-r--r--arch/parisc/hpux/sys_hpux.c1
-rw-r--r--arch/parisc/kernel/sys_parisc32.c1
-rw-r--r--arch/powerpc/Kconfig4
-rw-r--r--arch/powerpc/boot/div64.S3
-rw-r--r--arch/powerpc/kernel/kgdb.c4
-rw-r--r--arch/powerpc/kernel/setup_64.c5
-rw-r--r--arch/powerpc/kernel/sys_ppc32.c1
-rw-r--r--arch/powerpc/mm/hash_utils_64.c2
-rw-r--r--arch/powerpc/mm/tlb_low_64e.S5
-rw-r--r--arch/powerpc/mm/tlb_nohash.c2
-rw-r--r--arch/powerpc/platforms/pseries/Kconfig6
-rw-r--r--arch/powerpc/platforms/pseries/eeh.c2
-rw-r--r--arch/powerpc/platforms/pseries/pci_dlpar.c2
-rw-r--r--arch/s390/Kconfig.debug12
-rw-r--r--arch/s390/include/asm/page.h5
-rw-r--r--arch/s390/kernel/compat_linux.c1
-rw-r--r--arch/s390/kernel/kprobes.c70
-rw-r--r--arch/s390/mm/gup.c7
-rw-r--r--arch/sh/Kconfig1
-rw-r--r--arch/sh/Makefile3
-rw-r--r--arch/sh/boards/Kconfig7
-rw-r--r--arch/sh/boards/Makefile2
-rw-r--r--arch/sh/boards/board-edosk7705.c78
-rw-r--r--arch/sh/boards/board-secureedge5410.c (renamed from arch/sh/boards/mach-snapgear/setup.c)38
-rw-r--r--arch/sh/boards/mach-edosk7705/Makefile5
-rw-r--r--arch/sh/boards/mach-edosk7705/io.c71
-rw-r--r--arch/sh/boards/mach-edosk7705/setup.c36
-rw-r--r--arch/sh/boards/mach-microdev/io.c246
-rw-r--r--arch/sh/boards/mach-microdev/setup.c23
-rw-r--r--arch/sh/boards/mach-se/7206/Makefile2
-rw-r--r--arch/sh/boards/mach-se/7206/io.c104
-rw-r--r--arch/sh/boards/mach-se/7206/irq.c4
-rw-r--r--arch/sh/boards/mach-se/7206/setup.c15
-rw-r--r--arch/sh/boards/mach-se/770x/Makefile2
-rw-r--r--arch/sh/boards/mach-se/770x/io.c156
-rw-r--r--arch/sh/boards/mach-se/770x/setup.c22
-rw-r--r--arch/sh/boards/mach-se/7751/Makefile2
-rw-r--r--arch/sh/boards/mach-se/7751/io.c119
-rw-r--r--arch/sh/boards/mach-se/7751/setup.c18
-rw-r--r--arch/sh/boards/mach-snapgear/Makefile5
-rw-r--r--arch/sh/boards/mach-snapgear/io.c121
-rw-r--r--arch/sh/boards/mach-systemh/Makefile13
-rw-r--r--arch/sh/boards/mach-systemh/io.c158
-rw-r--r--arch/sh/boards/mach-systemh/irq.c61
-rw-r--r--arch/sh/boards/mach-systemh/setup.c57
-rw-r--r--arch/sh/configs/secureedge5410_defconfig (renamed from arch/sh/configs/snapgear_defconfig)0
-rw-r--r--arch/sh/configs/systemh_defconfig28
-rw-r--r--arch/sh/include/asm/addrspace.h8
-rw-r--r--arch/sh/include/asm/pgtable.h12
-rw-r--r--arch/sh/include/asm/processor_32.h7
-rw-r--r--arch/sh/include/asm/system.h4
-rw-r--r--arch/sh/include/asm/system_32.h36
-rw-r--r--arch/sh/include/asm/system_64.h3
-rw-r--r--arch/sh/include/asm/uncached.h40
-rw-r--r--arch/sh/include/mach-common/mach/edosk7705.h7
-rw-r--r--arch/sh/include/mach-common/mach/microdev.h9
-rw-r--r--arch/sh/include/mach-common/mach/secureedge5410.h (renamed from arch/sh/include/mach-common/mach/snapgear.h)22
-rw-r--r--arch/sh/include/mach-common/mach/systemh7751.h71
-rw-r--r--arch/sh/kernel/cpu/sh4/clock-sh4-202.c2
-rw-r--r--arch/sh/kernel/cpu/sh4a/clock-sh7724.c6
-rw-r--r--arch/sh/kernel/sys_sh.c2
-rw-r--r--arch/sh/kernel/vsyscall/vsyscall-trapa.S2
-rw-r--r--arch/sh/mm/Kconfig2
-rw-r--r--arch/sh/mm/consistent.c15
-rw-r--r--arch/sh/mm/uncached.c2
-rw-r--r--arch/sh/tools/mach-types1
-rw-r--r--arch/sparc/kernel/leon_smp.c1
-rw-r--r--arch/sparc/kernel/sys_sparc32.c1
-rw-r--r--arch/sparc/kernel/sys_sparc_32.c1
-rw-r--r--arch/sparc/kernel/unaligned_32.c1
-rw-r--r--arch/sparc/kernel/windows.c1
-rw-r--r--arch/tile/Kconfig12
-rw-r--r--arch/tile/include/asm/cacheflush.h52
-rw-r--r--arch/tile/include/asm/io.h15
-rw-r--r--arch/tile/include/asm/pci-bridge.h117
-rw-r--r--arch/tile/include/asm/pci.h107
-rw-r--r--arch/tile/include/asm/processor.h10
-rw-r--r--arch/tile/include/hv/drv_xgbe_impl.h300
-rw-r--r--arch/tile/include/hv/drv_xgbe_intf.h615
-rw-r--r--arch/tile/include/hv/netio_errors.h122
-rw-r--r--arch/tile/include/hv/netio_intf.h2975
-rw-r--r--arch/tile/kernel/Makefile1
-rw-r--r--arch/tile/kernel/compat.c1
-rw-r--r--arch/tile/kernel/compat_signal.c1
-rw-r--r--arch/tile/kernel/pci.c621
-rw-r--r--arch/tile/kernel/setup.c2
-rw-r--r--arch/tile/kernel/signal.c1
-rw-r--r--arch/tile/kernel/smpboot.c1
-rw-r--r--arch/tile/kernel/sys.c1
-rw-r--r--arch/tile/lib/memchr_32.c35
-rw-r--r--arch/tile/lib/spinlock_32.c29
-rw-r--r--arch/tile/mm/fault.c1
-rw-r--r--arch/tile/mm/hugetlbpage.c1
-rw-r--r--arch/um/drivers/line.c5
-rw-r--r--arch/um/include/asm/ptrace-generic.h4
-rw-r--r--arch/um/kernel/exec.c1
-rw-r--r--arch/um/kernel/ptrace.c2
-rw-r--r--arch/x86/ia32/sys_ia32.c1
-rw-r--r--arch/x86/include/asm/apic.h10
-rw-r--r--arch/x86/include/asm/fixmap.h4
-rw-r--r--arch/x86/include/asm/uv/uv_mmrs.h189
-rw-r--r--arch/x86/include/asm/xen/interface.h6
-rw-r--r--arch/x86/include/asm/xen/interface_32.h5
-rw-r--r--arch/x86/include/asm/xen/interface_64.h13
-rw-r--r--arch/x86/include/asm/xen/page.h7
-rw-r--r--arch/x86/kernel/apic/apic.c1
-rw-r--r--arch/x86/kernel/apic/x2apic_uv_x.c12
-rw-r--r--arch/x86/kernel/cpu/perf_event_amd.c4
-rw-r--r--arch/x86/kernel/cpuid.c1
-rw-r--r--arch/x86/kernel/kgdb.c12
-rw-r--r--arch/x86/kernel/microcode_amd.c2
-rw-r--r--arch/x86/kernel/mmconf-fam10h_64.c7
-rw-r--r--arch/x86/kernel/msr.c1
-rw-r--r--arch/x86/kernel/pvclock.c38
-rw-r--r--arch/x86/kvm/svm.c2
-rw-r--r--arch/x86/kvm/vmx.c19
-rw-r--r--arch/x86/mm/tlb.c2
-rw-r--r--arch/x86/pci/acpi.c103
-rw-r--r--arch/x86/pci/xen.c8
-rw-r--r--arch/x86/platform/uv/tlb_uv.c13
-rw-r--r--arch/x86/xen/enlighten.c21
-rw-r--r--arch/x86/xen/mmu.c86
-rw-r--r--arch/x86/xen/setup.c30
211 files changed, 5914 insertions, 2196 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a19a5266d5fc..db524e75c4a2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -6,7 +6,7 @@ config ARM
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
- select GENERIC_ATOMIC64 if (!CPU_32v6K)
+ select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
@@ -646,7 +646,7 @@ config ARCH_S3C2410
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
+ select HAVE_S3C2410_I2C if I2C
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -676,8 +676,8 @@ config ARCH_S3C64XX
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
- select HAVE_S3C2410_I2C
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S3C64XX series based systems
@@ -686,10 +686,10 @@ config ARCH_S5P64X0
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
- select HAVE_S3C_RTC
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
help
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
@@ -700,7 +700,7 @@ config ARCH_S5P6442
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5P6442 CPU based systems
@@ -711,9 +711,9 @@ config ARCH_S5PC100
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
- select HAVE_S3C_RTC
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PC100 series based systems
@@ -726,9 +726,9 @@ config ARCH_S5PV210
select ARM_L1_CACHE_SHIFT_6
select ARCH_HAS_CPUFREQ
select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_I2C
- select HAVE_S3C_RTC
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
@@ -739,9 +739,9 @@ config ARCH_S5PV310
select GENERIC_GPIO
select HAVE_CLK
select GENERIC_CLOCKEVENTS
- select HAVE_S3C_RTC
- select HAVE_S3C2410_I2C
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PV310 series based systems
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 6825c34646d4..9be21ba648cd 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -1084,6 +1084,6 @@ memdump: mov r12, r0
reloc_end:
.align
- .section ".stack", "w"
+ .section ".stack", "aw", %nobits
user_stack: .space 4096
user_stack_end:
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index d08168941bd6..366a924019ac 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -57,7 +57,7 @@ SECTIONS
.bss : { *(.bss) }
_end = .;
- .stack (NOLOAD) : { *(.stack) }
+ .stack : { *(.stack) }
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index ada6359160eb..772f95f1aecd 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -251,15 +251,16 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
- * Set priority on all interrupts.
+ * Set priority on all global interrupts.
*/
- for (i = 0; i < max_irq; i += 4)
+ for (i = 32; i < max_irq; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
- * Disable all interrupts.
+ * Disable all interrupts. Leave the PPI and SGIs alone
+ * as these enables are banked registers.
*/
- for (i = 0; i < max_irq; i += 32)
+ for (i = 32; i < max_irq; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
@@ -277,11 +278,30 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
{
+ void __iomem *dist_base;
+ int i;
+
if (gic_nr >= MAX_GIC_NR)
BUG();
+ dist_base = gic_data[gic_nr].dist_base;
+ BUG_ON(!dist_base);
+
gic_data[gic_nr].cpu_base = base;
+ /*
+ * Deal with the banked PPI and SGI interrupts - disable all
+ * PPI interrupts, ensure all SGI interrupts are enabled.
+ */
+ writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+ writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+ /*
+ * Set priority on PPI and SGI interrupts
+ */
+ for (i = 0; i < 32; i += 4)
+ writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
writel(0xf0, base + GIC_CPU_PRIMASK);
writel(1, base + GIC_CPU_CTRL);
}
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 062b58c029ab..749bb6622404 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -238,7 +238,7 @@
@ Slightly optimised to avoid incrementing the pointer twice
usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
.if \rept == 2
- usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+ usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
.endif
add\cond \ptr, #\rept * \inc
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 6700c7fc7ebd..21fa272301f8 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -75,7 +75,7 @@ extern unsigned long it8152_base_address;
IT8152_PD_IRQ(1) USB (USBR)
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
-#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
+#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 68870c776671..b4ffe9d5b526 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -13,6 +13,10 @@ typedef struct {
#ifdef CONFIG_CPU_HAS_ASID
#define ASID(mm) ((mm)->context.id & 255)
+
+/* init_mm.context.id_lock should be initialized. */
+#define INIT_MM_CONTEXT(name) \
+ .context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock),
#else
#define ASID(mm) (0)
#endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index b155414192da..53d1d5deb111 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -374,6 +374,9 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end) (end)
+
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 54593b0c241b..21e3a4ab3b8c 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -748,8 +748,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
breakpoint_handler(addr, regs);
break;
case ARM_ENTRY_ASYNC_WATCHPOINT:
- WARN_ON("Asynchronous watchpoint exception taken. "
- "Debugging results may be unreliable");
+ WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
case ARM_ENTRY_SYNC_WATCHPOINT:
watchpoint_handler(addr, regs);
break;
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 49643b1467e6..07a50357492a 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -1749,7 +1749,7 @@ static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
enum armv7_counters counter)
{
- int ret;
+ int ret = 0;
if (counter == ARMV7_CYCLE_COUNTER)
ret = pmnc & ARMV7_FLAG_C;
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 20b7411e47fd..c2e112e1a05f 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -28,7 +28,7 @@ int notrace unwind_frame(struct stackframe *frame)
/* only go to a higher address on the stack */
low = frame->sp;
- high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+ high = ALIGN(low, THREAD_SIZE);
/* check current frame pointer is within bounds */
if (fp < (low + 12) || fp + 4 >= high)
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index cda78d59aa31..446aee97436f 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -53,10 +53,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long);
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
- char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
- sprint_symbol(sym1, where);
- sprint_symbol(sym2, from);
- printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
+ printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
#else
printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
#endif
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 2a161765f6d5..d2cb0b3c9872 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -279,7 +279,7 @@ int unwind_frame(struct stackframe *frame)
/* only go to a higher address on the stack */
low = frame->sp;
- high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+ high = ALIGN(low, THREAD_SIZE);
pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
frame->pc, frame->lr, frame->sp);
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 1e4cbd4e7be9..64f6bc1a9132 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be)
*/
.L_found:
#if __LINUX_ARM_ARCH__ >= 5
- rsb r1, r3, #0
- and r3, r3, r1
+ rsb r0, r3, #0
+ and r3, r3, r0
clz r3, r3
rsb r3, r3, #31
add r0, r2, r3
@@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be)
addeq r2, r2, #1
mov r0, r2
#endif
+ cmp r1, r0 @ Clamp to maxbit
+ movlo r0, r1
mov pc, lr
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
index cff4e0a996ce..a6299e8321bd 100644
--- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -11,6 +11,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
index 3db3a09fd398..7397bd7817d9 100644
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -22,4 +22,4 @@
* 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
* larger physical memory designs better.
*/
-#define VMALLOC_END 0xf0000000
+#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
index 30b3a287ed88..467b96137e47 100644
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 9be261beae7d..2652af124acd 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -359,8 +359,8 @@ static struct clk_lookup dm355_clks[] = {
CLK(NULL, "uart1", &uart1_clk),
CLK(NULL, "uart2", &uart2_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
- CLK("davinci-asp.0", NULL, &asp0_clk),
- CLK("davinci-asp.1", NULL, &asp1_clk),
+ CLK("davinci-mcbsp.0", NULL, &asp0_clk),
+ CLK("davinci-mcbsp.1", NULL, &asp1_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
@@ -664,7 +664,7 @@ static struct resource dm355_asp1_resources[] = {
};
static struct platform_device dm355_asp1_device = {
- .name = "davinci-asp",
+ .name = "davinci-mcbsp",
.id = 1,
.num_resources = ARRAY_SIZE(dm355_asp1_resources),
.resource = dm355_asp1_resources,
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index a12065e87266..c466d710d3c1 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -459,7 +459,7 @@ static struct clk_lookup dm365_clks[] = {
CLK(NULL, "usb", &usb_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("davinci_voicecodec", NULL, &voicecodec_clk),
- CLK("davinci-asp.0", NULL, &asp0_clk),
+ CLK("davinci-mcbsp", NULL, &asp0_clk),
CLK(NULL, "rto", &rto_clk),
CLK(NULL, "mjcp", &mjcp_clk),
CLK(NULL, NULL, NULL),
@@ -922,8 +922,8 @@ static struct resource dm365_asp_resources[] = {
};
static struct platform_device dm365_asp_device = {
- .name = "davinci-asp",
- .id = 0,
+ .name = "davinci-mcbsp",
+ .id = -1,
.num_resources = ARRAY_SIZE(dm365_asp_resources),
.resource = dm365_asp_resources,
};
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 0608dd776a16..9a2376b3137c 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -302,7 +302,7 @@ static struct clk_lookup dm644x_clks[] = {
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("palm_bk3710", NULL, &ide_clk),
- CLK("davinci-asp", NULL, &asp_clk),
+ CLK("davinci-mcbsp", NULL, &asp_clk),
CLK("davinci_mmc.0", NULL, &mmcsd_clk),
CLK(NULL, "spi", &spi_clk),
CLK(NULL, "gpio", &gpio_clk),
@@ -580,7 +580,7 @@ static struct resource dm644x_asp_resources[] = {
};
static struct platform_device dm644x_asp_device = {
- .name = "davinci-asp",
+ .name = "davinci-mcbsp",
.id = -1,
.num_resources = ARRAY_SIZE(dm644x_asp_resources),
.resource = dm644x_asp_resources,
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
index 60bde56fba4c..ea141b7a3e03 100644
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define VMALLOC_END 0xdf000000
+#define VMALLOC_END 0xdf000000UL
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index 3a5961d3f3b1..5e31b2b25da9 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -1,5 +1,13 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/dma.h
+/**
+ * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine
+ *
+ * The EP93xx DMA M2P subsystem handles DMA transfers between memory and
+ * peripherals. DMA M2P channels are available for audio, UARTs and IrDA.
+ * See chapter 10 of the EP93xx users guide for full details on the DMA M2P
+ * engine.
+ *
+ * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code.
+ *
*/
#ifndef __ASM_ARCH_DMA_H
@@ -8,12 +16,34 @@
#include <linux/list.h>
#include <linux/types.h>
+/**
+ * struct ep93xx_dma_buffer - Information about a buffer to be transferred
+ * using the DMA M2P engine
+ *
+ * @list: Entry in DMA buffer list
+ * @bus_addr: Physical address of the buffer
+ * @size: Size of the buffer in bytes
+ */
struct ep93xx_dma_buffer {
struct list_head list;
u32 bus_addr;
u16 size;
};
+/**
+ * struct ep93xx_dma_m2p_client - Information about a DMA M2P client
+ *
+ * @name: Unique name for this client
+ * @flags: Client flags
+ * @cookie: User data to pass to callback functions
+ * @buffer_started: Non NULL function to call when a transfer is started.
+ * The arguments are the user data cookie and the DMA
+ * buffer which is starting.
+ * @buffer_finished: Non NULL function to call when a transfer is completed.
+ * The arguments are the user data cookie, the DMA buffer
+ * which has completed, and a boolean flag indicating if
+ * the transfer had an error.
+ */
struct ep93xx_dma_m2p_client {
char *name;
u8 flags;
@@ -24,10 +54,11 @@ struct ep93xx_dma_m2p_client {
struct ep93xx_dma_buffer *buf,
int bytes, int error);
- /* Internal to the DMA code. */
+ /* private: Internal use only */
void *channel;
};
+/* DMA M2P ports */
#define EP93XX_DMA_M2P_PORT_I2S1 0x00
#define EP93XX_DMA_M2P_PORT_I2S2 0x01
#define EP93XX_DMA_M2P_PORT_AAC1 0x02
@@ -39,18 +70,80 @@ struct ep93xx_dma_m2p_client {
#define EP93XX_DMA_M2P_PORT_UART3 0x08
#define EP93XX_DMA_M2P_PORT_IRDA 0x09
#define EP93XX_DMA_M2P_PORT_MASK 0x0f
-#define EP93XX_DMA_M2P_TX 0x00
-#define EP93XX_DMA_M2P_RX 0x10
-#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20
-#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40
-#define EP93XX_DMA_M2P_ERROR_MASK 0x60
-int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+/* DMA M2P client flags */
+#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */
+#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */
+
+/*
+ * DMA M2P client error handling flags. See the EP93xx users guide
+ * documentation on the DMA M2P CONTROL register for more details
+ */
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */
+#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */
+#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */
+
+/**
+ * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client information to register
+ * returns 0 on success
+ *
+ * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA
+ * client
+ */
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client to unregister
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ */
void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * If the current or next transfer positions are free on the M2P client then
+ * the transfer is started immediately. If not, the transfer is added to the
+ * list of pending transfers. This function must not be called from the
+ * buffer_finished callback for an M2P channel.
+ *
+ */
void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list
+ * for an M2P channel
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * This function must only be called from the buffer_finished callback for an
+ * M2P channel. It is commonly used to add the next transfer in a chained list
+ * of DMA transfers.
+ */
void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client
+ *
+ * @m2p: DMA client to flush transfers on
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ *
+ */
void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
index 0ffbb7c85e59..40ba78e5782b 100644
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
*/
-#define VMALLOC_END 0xf0000000
+#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
index a45915b88756..8520b4a4d4e6 100644
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -5,6 +5,6 @@
#ifndef __ARCH_ARM_VMALLOC_H
#define __ARCH_ARM_VMALLOC_H
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
#endif
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 026263c665ca..7e1e9dc2c8fc 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -250,9 +250,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
- || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
#define ADS7846_PENDOWN (GPIO_PORTD | 25)
static void ads7846_dev_init(void)
@@ -273,9 +270,7 @@ static struct ads7846_platform_data ads7846_config __initdata = {
.get_pendown_state = ads7846_get_pendown_state,
.keep_vref_on = 1,
};
-#endif
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
[0] = {
.modalias = "ads7846",
@@ -294,7 +289,6 @@ static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
.chipselect = eukrea_mbimx27_spi_cs,
.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
};
-#endif
static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
{
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
index e056e7cf5645..2f5a2bafb11f 100644
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 51ff23b72d3a..3688123b5ad8 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -854,10 +854,9 @@ int __init kirkwood_find_tclk(void)
kirkwood_pcie_id(&dev, &rev);
- if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
- rev == MV88F6281_REV_A1)) ||
- (dev == MV88F6282_DEV_ID))
- return 200000000;
+ if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
+ if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
+ return 200000000;
return 166666667;
}
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 4aa86e4a152c..a31c9499ab36 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -225,5 +225,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
index d3ea1b6c8a02..285edab776e9 100644
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -111,17 +111,3 @@ void __init lacie_v2_hdd_power_init(int hdd_num)
pr_err("Failed to power up HDD%d\n", i + 1);
}
}
-
-/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void lacie_v2_timer_init(void)
-{
- kirkwood_tclk = 166666667;
- orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer lacie_v2_timer = {
- .init = lacie_v2_timer_init,
-};
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
index af521315b87b..fc64f578536e 100644
--- a/arch/arm/mach-kirkwood/lacie_v2-common.h
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.h
@@ -13,6 +13,4 @@ void lacie_v2_register_flash(void);
void lacie_v2_register_i2c_devices(void);
void lacie_v2_hdd_power_init(int hdd_num);
-extern struct sys_timer lacie_v2_timer;
-
#endif
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 065187d177c6..27901f702feb 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -59,7 +59,7 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
}
printk("\n");
- while (*mpp_list) {
+ for ( ; *mpp_list; mpp_list++) {
unsigned int num = MPP_NUM(*mpp_list);
unsigned int sel = MPP_SEL(*mpp_list);
int shift, gpio_mode;
@@ -88,8 +88,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
if (sel != 0)
gpio_mode = 0;
orion_gpio_set_valid(num, gpio_mode);
-
- mpp_list++;
}
printk(KERN_DEBUG " final MPP regs:");
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 5ea66f1f4178..65ee21fd2f3b 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -262,7 +262,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
@@ -272,7 +272,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
@@ -282,6 +282,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index a1b45d501aef..93afd3c8bfd8 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -403,7 +403,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
@@ -413,6 +413,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 8be09a0ce4ac..3587a281d993 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -27,6 +27,10 @@
#include "mpp.h"
#include "tsx1x-common.h"
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
#define QNAP_TS41X_JUMPER_JP1 45
static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
@@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void)
static int __init ts41x_pci_init(void)
{
- if (machine_is_ts41x())
+ if (machine_is_ts41x()) {
+ /*
+ * Without this explicit reset, the PCIe SATA controller
+ * (Marvell 88sx7042/sata_mv) is known to stop working
+ * after a few minutes.
+ */
+ orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+
kirkwood_pcie_init(KW_PCIE0);
+ }
return 0;
}
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index f43a68b213f1..8a3b56dfd35d 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -46,7 +46,8 @@ static inline int cpu_is_pxa910(void)
#ifdef CONFIG_CPU_MMP2
static inline int cpu_is_mmp2(void)
{
- return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
+ return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
+}
#else
#define cpu_is_mmp2() (0)
#endif
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
index 31a32ad062dc..d138448eff16 100644
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -16,7 +16,7 @@
#ifndef __ASM_ARCH_MSM_VMALLOC_H
#define __ASM_ARCH_MSM_VMALLOC_H
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
#endif
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index 354ac514eb89..84db2dfc475c 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -54,7 +54,7 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
}
printk("\n");
- while (*mpp_list) {
+ for ( ; *mpp_list; mpp_list++) {
unsigned int num = MPP_NUM(*mpp_list);
unsigned int sel = MPP_SEL(*mpp_list);
int shift, gpio_mode;
@@ -83,8 +83,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
if (sel != 0)
gpio_mode = 0;
orion_gpio_set_valid(num, gpio_mode);
-
- mpp_list++;
}
printk(KERN_DEBUG " final MPP regs:");
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
index 93afa10b13cf..d94d282fa676 100644
--- a/arch/arm/mach-mx25/devices-imx25.h
+++ b/arch/arm/mach-mx25/devices-imx25.h
@@ -42,9 +42,9 @@ extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
#define imx25_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
-extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
#define imx25_add_spi_imx(id, pdata) \
- imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+ imx_add_spi_imx(&imx25_cspi_data[id], pdata)
#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 99e0894e07db..fda56545d2fd 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -14,6 +14,7 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
+#include <mach/spi.h>
#include <asm/mach-types.h>
@@ -59,14 +60,12 @@ static struct spi_board_info pcm037_spi_dev[] = {
};
/* Platform Data for MXC CSPI */
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
.chipselect = pcm037_spi1_cs,
.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
};
-#endif
/* GPIO-keys input device */
static struct gpio_keys_button pcm037_gpio_keys[] = {
@@ -171,7 +170,7 @@ static struct platform_device pcm037_gpio_keys_device = {
},
};
-static int eet_init_devices(void)
+static int __init eet_init_devices(void)
{
if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
return 0;
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
index 7cca3574308f..871f1ef7bff5 100644
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -16,4 +16,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index ea0d80a89da7..e7f9ee63dce5 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -321,10 +321,9 @@ static struct platform_device omap_wdt_device = {
static int __init omap_init_wdt(void)
{
if (!cpu_is_omap16xx())
- return;
+ return -ENODEV;
- platform_device_register(&omap_wdt_device);
- return 0;
+ return platform_device_register(&omap_wdt_device);
}
subsys_initcall(omap_init_wdt);
#endif
diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h
index fd54b452eb22..847d00f0bb0a 100644
--- a/arch/arm/mach-omap1/include/mach/camera.h
+++ b/arch/arm/mach-omap1/include/mach/camera.h
@@ -1,6 +1,8 @@
#ifndef __ASM_ARCH_CAMERA_H_
#define __ASM_ARCH_CAMERA_H_
+#include <media/omap1_camera.h>
+
void omap1_camera_init(void *);
static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
index b001f67d695b..22ec4a479577 100644
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xd8000000
+#define VMALLOC_END 0xd8000000UL
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f4379c87f..53ac762518bd 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- devkit8000_vmmc1_supply.dev = mmc[0].dev;
-
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index 4da31e997efe..866319947760 100644
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xf8000000
+#define VMALLOC_END 0xf8000000UL
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index bc4c3b9aaf83..db485d3b8144 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -127,7 +127,7 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
/* Initialize gpiolib. */
orion_gpio_init();
- while (mode->mpp >= 0) {
+ for ( ; mode->mpp >= 0; mode++) {
u32 *reg;
int num_type;
int shift;
@@ -160,8 +160,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
orion_gpio_set_unused(mode->mpp);
orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
-
- mode++;
}
writel(mpp_0_7_ctrl, MPP_0_7_CTRL);
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 16f1bd5324be..c1c1cd04bdde 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -239,7 +239,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
static struct resource ts78xx_ts_nand_resources = {
.start = TS_NAND_DATA,
.end = TS_NAND_DATA + 4,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
};
static struct platform_device ts78xx_ts_nand_device = {
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
index 31b65ee07b0b..184913c71141 100644
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index ac5598ce9724..d34b99febeb9 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -476,8 +476,6 @@ static void __init cmx2xx_init(void)
static void __init cmx2xx_init_irq(void)
{
- pxa27x_init_irq();
-
if (cpu_is_pxa25x()) {
pxa25x_init_irq();
cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 4b521e045d75..ffa50e633ee6 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -116,7 +116,7 @@ static struct platform_device smc91x_device = {
},
};
-#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static uint16_t lcd_power_on[] = {
/* single frame */
SMART_CMD_NOOP,
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
index 3bcd86fadb81..fb700228637a 100644
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define VMALLOC_END 0xdc000000
+#define VMALLOC_END 0xdc000000UL
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 8aa2f1902a94..6b86a722a7db 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
/* Configures BT serial port GPIOs */
s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
- s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
- s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
- s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 084d121f368c..00174daf1526 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = {
static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
{
- s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+ s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
}
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
static void s3c2416_irq_uart3_mask(unsigned int irqno)
{
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 0e0d693f3974..893424767ce1 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = {
static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
{
- s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+ s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
}
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
static void s3c2443_irq_uart3_mask(unsigned int irqno)
{
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 1ca7bdc6485c..579d2f0f4dd0 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -143,7 +143,7 @@ config MACH_SMDK6410
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_KEYPAD
- select HAVE_S3C2410_WATCHDOG
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 249c62956471..89f35e02e883 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -45,7 +45,7 @@
#include <video/platform_lcd.h>
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index f9ef9b5c5f5a..4957ab0a0d4a 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -46,7 +46,7 @@
#include <video/platform_lcd.h>
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 0ad7924fe62e..5dd1681c069e 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/i2c.h>
+#include <linux/sysdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index bcd7a5d53401..1fbc45b2a432 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/sysdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
index 8e845b6a7cb5..b10df988526d 100644
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
/*
* arch/arm/mach-shark/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xd0000000
+#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 54b479c35ee0..51dcd59eda6a 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -116,4 +116,6 @@ endmenu
config SH_CLK_CPG
bool
+source "drivers/sh/Kconfig"
+
endif
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 46ca4d4abf91..d3260542b943 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -163,11 +163,13 @@ static struct mtd_partition nor_flash_partitions[] = {
.name = "loader",
.offset = 0x00000000,
.size = 512 * 1024,
+ .mask_flags = MTD_WRITEABLE,
},
{
.name = "bootenv",
.offset = MTDPART_OFS_APPEND,
.size = 512 * 1024,
+ .mask_flags = MTD_WRITEABLE,
},
{
.name = "kernel_ro",
@@ -565,12 +567,54 @@ static struct platform_device *qhd_devices[] __initdata = {
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
+
+static int fsi_set_rate(int is_porta, int rate)
+{
+ struct clk *fsib_clk;
+ struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+ int ret;
+
+ /* set_rate is not needed if port A */
+ if (is_porta)
+ return 0;
+
+ fsib_clk = clk_get(NULL, "fsib_clk");
+ if (IS_ERR(fsib_clk))
+ return -EINVAL;
+
+ switch (rate) {
+ case 44100:
+ clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
+ ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ break;
+ case 48000:
+ clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
+ clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
+ ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ break;
+ default:
+ pr_err("unsupported rate in FSI2 port B\n");
+ ret = -EINVAL;
+ break;
+ }
+
+ clk_put(fsib_clk);
+
+ return ret;
+}
+
static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
SH_FSI_IN_SLAVE_MODE |
SH_FSI_OFMT(PCM) |
SH_FSI_IFMT(PCM),
+
+ .portb_flags = SH_FSI_BRS_INV |
+ SH_FSI_BRM_INV |
+ SH_FSI_LRS_INV |
+ SH_FSI_OFMT(SPDIF),
+ .set_rate = fsi_set_rate,
};
static struct resource fsi_resources[] = {
@@ -634,6 +678,7 @@ static struct platform_device lcdc1_device = {
static struct sh_mobile_hdmi_info hdmi_info = {
.lcd_chan = &sh_mobile_lcdc1_info.ch[0],
.lcd_dev = &lcdc1_device.dev,
+ .flags = HDMI_SND_SRC_SPDIF,
};
static struct resource hdmi_resources[] = {
@@ -992,6 +1037,7 @@ static void __init ap4evb_map_io(void)
#define GPIO_PORT9CR 0xE6051009
#define GPIO_PORT10CR 0xE605100A
+#define USCCR1 0xE6058144
static void __init ap4evb_init(void)
{
u32 srcr4;
@@ -1062,7 +1108,7 @@ static void __init ap4evb_init(void)
/* setup USB phy */
__raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */
- /* enable FSI2 */
+ /* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
@@ -1079,6 +1125,10 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_PORT41, NULL);
gpio_direction_input(GPIO_PORT41);
+ /* setup FSI2 port B (HDMI) */
+ gpio_request(GPIO_FN_FSIBCK, NULL);
+ __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
+
/* set SPU2 clock to 119.6 MHz */
clk = clk_get(NULL, "spu_clk");
if (!IS_ERR(clk)) {
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 8565aefa21fd..b25ce90a346e 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -50,6 +50,9 @@
#define SMSTPCR3 0xe615013c
#define SMSTPCR4 0xe6150140
+#define FSIDIVA 0xFE1F8000
+#define FSIDIVB 0xFE1F8008
+
/* Platforms must set frequency on their DV_CLKI pin */
struct clk sh7372_dv_clki_clk = {
};
@@ -217,8 +220,7 @@ static void pllc2_disable(struct clk *clk)
__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
}
-static int pllc2_set_rate(struct clk *clk,
- unsigned long rate, int algo_id)
+static int pllc2_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long value;
int idx;
@@ -288,6 +290,7 @@ struct clk sh7372_pllc2_clk = {
.ops = &pllc2_clk_ops,
.parent = &extal1_div2_clk,
.freq_table = pllc2_freq_table,
+ .nr_freqs = ARRAY_SIZE(pllc2_freq_table) - 1,
.parent_table = pllc2_parent,
.parent_num = ARRAY_SIZE(pllc2_parent),
};
@@ -417,6 +420,100 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
};
+/* FSI DIV */
+static unsigned long fsidiv_recalc(struct clk *clk)
+{
+ unsigned long value;
+
+ value = __raw_readl(clk->mapping->base);
+
+ if ((value & 0x3) != 0x3)
+ return 0;
+
+ value >>= 16;
+ if (value < 2)
+ return 0;
+
+ return clk->parent->rate / value;
+}
+
+static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk_rate_div_range_round(clk, 2, 0xffff, rate);
+}
+
+static void fsidiv_disable(struct clk *clk)
+{
+ __raw_writel(0, clk->mapping->base);
+}
+
+static int fsidiv_enable(struct clk *clk)
+{
+ unsigned long value;
+
+ value = __raw_readl(clk->mapping->base) >> 16;
+ if (value < 2) {
+ fsidiv_disable(clk);
+ return -ENOENT;
+ }
+
+ __raw_writel((value << 16) | 0x3, clk->mapping->base);
+
+ return 0;
+}
+
+static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
+{
+ int idx;
+
+ if (clk->parent->rate == rate) {
+ fsidiv_disable(clk);
+ return 0;
+ }
+
+ idx = (clk->parent->rate / rate) & 0xffff;
+ if (idx < 2)
+ return -ENOENT;
+
+ __raw_writel(idx << 16, clk->mapping->base);
+ return fsidiv_enable(clk);
+}
+
+static struct clk_ops fsidiv_clk_ops = {
+ .recalc = fsidiv_recalc,
+ .round_rate = fsidiv_round_rate,
+ .set_rate = fsidiv_set_rate,
+ .enable = fsidiv_enable,
+ .disable = fsidiv_disable,
+};
+
+static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+ .phys = FSIDIVA,
+ .len = 8,
+};
+
+struct clk sh7372_fsidiva_clk = {
+ .ops = &fsidiv_clk_ops,
+ .parent = &div6_reparent_clks[DIV6_FSIA], /* late install */
+ .mapping = &sh7372_fsidiva_clk_mapping,
+};
+
+static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+ .phys = FSIDIVB,
+ .len = 8,
+};
+
+struct clk sh7372_fsidivb_clk = {
+ .ops = &fsidiv_clk_ops,
+ .parent = &div6_reparent_clks[DIV6_FSIB], /* late install */
+ .mapping = &sh7372_fsidivb_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+ &sh7372_fsidiva_clk,
+ &sh7372_fsidivb_clk,
+};
+
enum { MSTP001,
MSTP131, MSTP130,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
@@ -585,6 +682,9 @@ void __init sh7372_clock_init(void)
if (!ret)
ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+ ret = clk_register(late_main_clks[k]);
+
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index 5bc6bd444d72..2b1bb9e43dda 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -35,12 +35,12 @@ static inline int gpio_cansleep(unsigned gpio)
static inline int gpio_to_irq(unsigned gpio)
{
- return -ENOSYS;
+ return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned int irq)
{
- return -EINVAL;
+ return -ENOSYS;
}
#endif /* CONFIG_GPIOLIB */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index 147775a94bce..e4f9004e7103 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -464,5 +464,7 @@ extern struct clk sh7372_dv_clki_div2_clk;
extern struct clk sh7372_pllc2_clk;
extern struct clk sh7372_fsiack_clk;
extern struct clk sh7372_fsibck_clk;
+extern struct clk sh7372_fsidiva_clk;
+extern struct clk sh7372_fsidivb_clk;
#endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 4cd3cae38e72..30b2f400666a 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -98,7 +98,7 @@ static struct intc_vect intca_vectors[] __initdata = {
INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
- INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+ INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0),
INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 73fb1a551ec6..608a1372b172 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -75,14 +75,14 @@ void __init ux500_init_irq(void)
static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
{
/* wait for the operation to complete */
- while (readl(reg) & mask)
+ while (readl_relaxed(reg) & mask)
;
}
static inline void ux500_cache_sync(void)
{
void __iomem *base = __io_address(UX500_L2CC_BASE);
- writel(0, base + L2X0_CACHE_SYNC);
+ writel_relaxed(0, base + L2X0_CACHE_SYNC);
ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
}
@@ -107,7 +107,7 @@ static void ux500_l2x0_inv_all(void)
uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
/* invalidate all ways */
- writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
ux500_cache_sync();
}
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
index ebd8a2543d3b..7d8e069ad51b 100644
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xd8000000
+#define VMALLOC_END 0xd8000000UL
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index c2e405a9e025..fd25ccd7272f 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -54,7 +54,9 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = {
static void __init ct_ca9x4_map_io(void)
{
+#ifdef CONFIG_LOCAL_TIMERS
twd_base = MMIO_P2V(A9_MPCORE_TWD);
+#endif
v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
}
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e4dd0646e859..ac6a36142fcd 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -198,7 +198,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
* fragmentation of the DMA space, and also prevents allocations
* smaller than a section from crossing a section boundary.
*/
- bit = fls(size - 1) + 1;
+ bit = fls(size - 1);
if (bit > SECTION_SHIFT)
bit = SECTION_SHIFT;
align = 1 << bit;
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 17e7b0b57e49..55c17a6fb22f 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -206,8 +206,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
*/
if (pfn_valid(pfn)) {
printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n"
- KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
- KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n");
+ "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+ "will fail in the next kernel release. Please fix your driver.\n");
WARN_ON(1);
}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index 02d989018059..3a705c7877dd 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -12,15 +12,7 @@
#include <mach/hardware.h>
#include <mach/devices-common.h>
-#ifdef SDMA_IS_MERGED
#include <mach/sdma.h>
-#else
-struct sdma_platform_data {
- int sdma_version;
- char *cpu_name;
- int to_version;
-};
-#endif
struct imx_imx_sdma_data {
resource_size_t iobase;
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index e48340ec331e..17f724c9452d 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -27,6 +27,7 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
imx21_cspi_data_entry(0, 1),
imx21_cspi_data_entry(1, 2),
+};
#endif
#ifdef CONFIG_ARCH_MX25
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index aedf9c1d645e..63cdc6025bd7 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2008 STMicroelectronics
* Copyright (C) 2010 Alessandro Rubini
+ * Copyright (C) 2010 Linus Walleij for ST-Ericsson
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
@@ -16,11 +17,13 @@
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/err.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
#include <asm/mach/time.h>
#include <plat/mtu.h>
-void __iomem *mtu_base; /* ssigned by machine code */
+void __iomem *mtu_base; /* Assigned by machine code */
/*
* Kernel assumes that sched_clock can be called early
@@ -48,16 +51,82 @@ static struct clocksource nmdk_clksrc = {
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
+ * better resolution when scheduling the kernel.
+ *
+ * Because the hardware timer period may be quite short
+ * (32.3 secs on the 133 MHz MTU timer selection on ux500)
+ * and because cnt32_to_63() needs to be called at least once per
+ * half period to work properly, a kernel keepwarm() timer is set up
+ * to ensure this requirement is always met.
+ *
+ * Also the sched_clock timer will wrap around at some point,
+ * here we set it to run continously for a year.
*/
+#define SCHED_CLOCK_MIN_WRAP 3600*24*365
+static struct timer_list cnt32_to_63_keepwarm_timer;
+static u32 sched_mult;
+static u32 sched_shift;
+
unsigned long long notrace sched_clock(void)
{
- return clocksource_cyc2ns(nmdk_clksrc.read(
- &nmdk_clksrc),
- nmdk_clksrc.mult,
- nmdk_clksrc.shift);
+ u64 cycles;
+
+ if (unlikely(!mtu_base))
+ return 0;
+
+ cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0)));
+ /*
+ * sched_mult is guaranteed to be even so will
+ * shift out bit 63
+ */
+ return (cycles * sched_mult) >> sched_shift;
+}
+
+/* Just kick sched_clock every so often */
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+ mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+ (void) sched_clock();
+}
+
+/*
+ * Set up a timer to keep sched_clock():s 32_to_63 algorithm warm
+ * once in half a 32bit timer wrap interval.
+ */
+static void __init nmdk_sched_clock_init(unsigned long rate)
+{
+ u32 v;
+ unsigned long delta;
+ u64 days;
+
+ /* Find the apropriate mult and shift factors */
+ clocks_calc_mult_shift(&sched_mult, &sched_shift,
+ rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP);
+ /* We need to multiply by an even number to get rid of bit 63 */
+ if (sched_mult & 1)
+ sched_mult++;
+
+ /* Let's see what we get, take max counter and scale it */
+ days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift;
+ do_div(days, NSEC_PER_SEC);
+ do_div(days, (3600*24));
+
+ pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n",
+ (64 - sched_shift), rate, (unsigned long) days);
+
+ /*
+ * Program a timer to kick us at half 32bit wraparound
+ * Formula: seconds per wrap = (2^32) / f
+ */
+ v = 0xFFFFFFFFUL / rate;
+ /* We want half of the wrap time to keep cnt32_to_63 warm */
+ v /= 2;
+ pr_debug("sched_clock: prescaled timer rate: %lu Hz, "
+ "initialize keepwarm timer every %d seconds\n", rate, v);
+ /* Convert seconds to jiffies */
+ delta = msecs_to_jiffies(v*1000);
+ setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta);
+ mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta));
}
/* Clockevent device: use one-shot mode */
@@ -161,13 +230,15 @@ void __init nmdk_timer_init(void)
writel(0, mtu_base + MTU_BGLR(0));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
- /* Now the scheduling clock is ready */
+ /* Now the clock source is ready */
nmdk_clksrc.read = nmdk_read_timer;
if (clocksource_register(&nmdk_clksrc))
pr_err("timer: failed to initialize clock source %s\n",
nmdk_clksrc.name);
+ nmdk_sched_clock_init(rate);
+
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 6f42a18b8aa4..fc819120978d 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -284,12 +284,14 @@ void __init omap_dsp_reserve_sdram_memblock(void)
if (!size)
return;
- paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+ paddr = memblock_alloc(size, SZ_1M);
if (!paddr) {
pr_err("%s: failed to reserve %x bytes\n",
__func__, size);
return;
}
+ memblock_free(paddr, size);
+ memblock_remove(paddr, size);
omap_dsp_phys_mempool_base = paddr;
}
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index f5c5b8da9a87..2c2826571d45 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1983,6 +1983,8 @@ static int omap2_dma_handle_ch(int ch)
dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
dma_write(1 << ch, IRQSTATUS_L0);
+ /* read back the register to flush the write */
+ dma_read(IRQSTATUS_L0);
/* If the ch is not chained then chain_id will be -1 */
if (dma_chan[ch].chain_id != -1) {
diff --git a/arch/arm/plat-orion/include/plat/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h
index 3ebfef72b4e7..cc99163e73fd 100644
--- a/arch/arm/plat-orion/include/plat/pcie.h
+++ b/arch/arm/plat-orion/include/plat/pcie.h
@@ -11,12 +11,15 @@
#ifndef __PLAT_PCIE_H
#define __PLAT_PCIE_H
+struct pci_bus;
+
u32 orion_pcie_dev_id(void __iomem *base);
u32 orion_pcie_rev(void __iomem *base);
int orion_pcie_link_up(void __iomem *base);
int orion_pcie_x4_mode(void __iomem *base);
int orion_pcie_get_local_bus_nr(void __iomem *base);
void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_reset(void __iomem *base);
void orion_pcie_setup(void __iomem *base,
struct mbus_dram_target_info *dram);
int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index 779553a1595e..af2d733c50b5 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -182,11 +182,6 @@ void __init orion_pcie_setup(void __iomem *base,
u32 mask;
/*
- * soft reset PCIe unit
- */
- orion_pcie_reset(base);
-
- /*
* Point PCIe unit MBUS decode windows to DRAM space.
*/
orion_pcie_setup_wins(base, dram);
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9793544a6ace..704175b0573f 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
}
}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
index db9e9e477ec1..72457afd6255 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
}
}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8ea663a438bb..c3972b645d13 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
}
}
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index cd0c090ebc54..b407bc8ad918 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -7,7 +7,6 @@
*/
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/unistd.h>
#include <linux/user.h>
#include <linux/uaccess.h>
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index 2b63b0191f52..efad12071c2e 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index 97478138e361..933bd388efb2 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -28,7 +28,6 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index 3a078ad3aa44..331de723c676 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -202,7 +202,7 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
}
static int
-simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
{
unsigned int target_id = sc->device->id;
char fname[MAX_ROOT_LEN+16];
@@ -326,6 +326,8 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
return 0;
}
+static DEF_SCSI_QCMD(simscsi_queuecommand)
+
static int
simscsi_host_reset (struct scsi_cmnd *sc)
{
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 18732ab23292..c2a1fc23dd75 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -18,7 +18,6 @@
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 6d3390590e5b..e2a63af5d517 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 0d0f8049a17b..e1b14a6ed544 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index ba430a03bc7a..30394081d9b6 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -28,7 +28,6 @@
#include <linux/namei.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/utsname.h>
#include <linux/vfs.h>
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 9779ece2b070..88a0ad14a9c9 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -20,7 +20,6 @@
#include <linux/times.h>
#include <linux/time.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b6447190e1a2..e625e9e034ae 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -4,6 +4,10 @@ config PPC32
bool
default y if !PPC64
+config 32BIT
+ bool
+ default y if PPC32
+
config 64BIT
bool
default y if PPC64
diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S
index 722f360a32a9..d271ab542673 100644
--- a/arch/powerpc/boot/div64.S
+++ b/arch/powerpc/boot/div64.S
@@ -33,9 +33,10 @@ __div64_32:
cntlzw r0,r5 # we are shifting the dividend right
li r10,-1 # to make it < 2^32, and shifting
srw r10,r10,r0 # the divisor right the same amount,
- add r9,r4,r10 # rounding up (so the estimate cannot
+ addc r9,r4,r10 # rounding up (so the estimate cannot
andc r11,r6,r10 # ever be too large, only too small)
andc r9,r9,r10
+ addze r9,r9
or r11,r5,r11
rotlw r9,r9,r0
rotlw r11,r11,r0
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 7a9db64f3f04..42850ee00ada 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -337,7 +337,7 @@ char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
/* FP registers 32 -> 63 */
#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_SPE)
if (current)
- memcpy(mem, current->thread.evr[regno-32],
+ memcpy(mem, &current->thread.evr[regno-32],
dbg_reg_def[regno].size);
#else
/* fp registers not used by kernel, leave zero */
@@ -362,7 +362,7 @@ int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
if (regno >= 32 && regno < 64) {
/* FP registers 32 -> 63 */
#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_SPE)
- memcpy(current->thread.evr[regno-32], mem,
+ memcpy(&current->thread.evr[regno-32], mem,
dbg_reg_def[regno].size);
#else
/* fp registers not used by kernel, leave zero */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 2a178b0ebcdf..ce6f61c6f871 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -497,9 +497,8 @@ static void __init emergency_stack_init(void)
}
/*
- * Called into from start_kernel, after lock_kernel has been called.
- * Initializes bootmem, which is unsed to manage page allocation until
- * mem_init is called.
+ * Called into from start_kernel this initializes bootmem, which is used
+ * to manage page allocation until mem_init is called.
*/
void __init setup_arch(char **cmdline_p)
{
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index b1b6043a56c4..4e5bf1edc0f2 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -23,7 +23,6 @@
#include <linux/resource.h>
#include <linux/times.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 83f534d862db..5e9584405c45 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -1123,7 +1123,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
else
#endif /* CONFIG_PPC_HAS_HASH_64K */
rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
- subpage_protection(pgdir, ea));
+ subpage_protection(mm, ea));
/* Dump some info in case of hash insertion failure, they should
* never happen so it is really useful to know if/when they do
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 8b04c54e596f..8526bd9d2aa3 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -138,8 +138,11 @@
cmpldi cr0,r15,0 /* Check for user region */
std r14,EX_TLB_ESR(r12) /* write crazy -1 to frame */
beq normal_tlb_miss
+
+ li r11,_PAGE_PRESENT|_PAGE_BAP_SX /* Base perm */
+ oris r11,r11,_PAGE_ACCESSED@h
/* XXX replace the RMW cycles with immediate loads + writes */
-1: mfspr r10,SPRN_MAS1
+ mfspr r10,SPRN_MAS1
cmpldi cr0,r15,8 /* Check for vmalloc region */
rlwinm r10,r10,0,16,1 /* Clear TID */
mtspr SPRN_MAS1,r10
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 36c0c449a899..2a030d89bbc6 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -585,6 +585,6 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
/* Finally limit subsequent allocations */
- memblock_set_current_limit(ppc64_memblock_base + ppc64_rma_size);
+ memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
}
#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index c667f0f02c34..3139814f6439 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -47,6 +47,12 @@ config LPARCFG
config PPC_PSERIES_DEBUG
depends on PPC_PSERIES && PPC_EARLY_DEBUG
bool "Enable extra debug logging in platforms/pseries"
+ help
+ Say Y here if you want the pseries core to produce a bunch of
+ debug messages to the system log. Select this if you are having a
+ problem with the pseries core and want to see more of what is
+ going on. This does not enable debugging in lpar.c, which must
+ be manually done due to its verbosity.
default y
config PPC_SMLPAR
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 34b7dc12e731..17a11c82e6f8 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -21,8 +21,6 @@
* Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com>
*/
-#undef DEBUG
-
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/list.h>
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 4b7a062dee15..5fcc92a12d3e 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -25,8 +25,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#undef DEBUG
-
#include <linux/pci.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug
index 45e0c6199f36..05221b13ffb1 100644
--- a/arch/s390/Kconfig.debug
+++ b/arch/s390/Kconfig.debug
@@ -6,6 +6,18 @@ config TRACE_IRQFLAGS_SUPPORT
source "lib/Kconfig.debug"
+config STRICT_DEVMEM
+ def_bool y
+ prompt "Filter access to /dev/mem"
+ ---help---
+ This option restricts access to /dev/mem. If this option is
+ disabled, you allow userspace access to all memory, including
+ kernel and userspace memory. Accidental memory access is likely
+ to be disastrous.
+ Memory access is required for experts who want to debug the kernel.
+
+ If you are unsure, say Y.
+
config DEBUG_STRICT_USER_COPY_CHECKS
bool "Strict user copy size checks"
---help---
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index a8729ea7e9ac..3c987e9ec8d6 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -130,6 +130,11 @@ struct page;
void arch_free_page(struct page *page, int order);
void arch_alloc_page(struct page *page, int order);
+static inline int devmem_is_allowed(unsigned long pfn)
+{
+ return 0;
+}
+
#define HAVE_ARCH_FREE_PAGE
#define HAVE_ARCH_ALLOC_PAGE
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 1e6449c79ab6..53acaa86dd94 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -25,7 +25,6 @@
#include <linux/resource.h>
#include <linux/times.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index d60fc4398516..2564793ec2b6 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -30,6 +30,7 @@
#include <asm/sections.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/hardirq.h>
DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
@@ -212,7 +213,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
/* Set the PER control regs, turns on single step for this address */
__ctl_load(kprobe_per_regs, 9, 11);
regs->psw.mask |= PSW_MASK_PER;
- regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK);
+ regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
}
static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
@@ -239,7 +240,7 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
__get_cpu_var(current_kprobe) = p;
/* Save the interrupt and per flags */
kcb->kprobe_saved_imask = regs->psw.mask &
- (PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK);
+ (PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT);
/* Save the control regs that govern PER */
__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
}
@@ -316,8 +317,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
return 1;
ss_probe:
- if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
- local_irq_disable();
prepare_singlestep(p, regs);
kcb->kprobe_status = KPROBE_HIT_SS;
return 1;
@@ -350,6 +349,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
struct hlist_node *node, *tmp;
unsigned long flags, orig_ret_address = 0;
unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+ kprobe_opcode_t *correct_ret_addr = NULL;
INIT_HLIST_HEAD(&empty_rp);
kretprobe_hash_lock(current, &head, &flags);
@@ -372,10 +372,32 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
/* another task is sharing our hash bucket */
continue;
- if (ri->rp && ri->rp->handler)
- ri->rp->handler(ri, regs);
+ orig_ret_address = (unsigned long)ri->ret_addr;
+
+ if (orig_ret_address != trampoline_address)
+ /*
+ * This is the real return address. Any other
+ * instances associated with this task are for
+ * other calls deeper on the call stack
+ */
+ break;
+ }
+
+ kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+ correct_ret_addr = ri->ret_addr;
+ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+ if (ri->task != current)
+ /* another task is sharing our hash bucket */
+ continue;
orig_ret_address = (unsigned long)ri->ret_addr;
+
+ if (ri->rp && ri->rp->handler) {
+ ri->ret_addr = correct_ret_addr;
+ ri->rp->handler(ri, regs);
+ }
+
recycle_rp_inst(ri, &empty_rp);
if (orig_ret_address != trampoline_address) {
@@ -387,7 +409,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
break;
}
}
- kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
reset_current_kprobe();
@@ -465,8 +487,6 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
goto out;
}
reset_current_kprobe();
- if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
- local_irq_enable();
out:
preempt_enable_no_resched();
@@ -482,7 +502,7 @@ out:
return 1;
}
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+static int __kprobes kprobe_trap_handler(struct pt_regs *regs, int trapnr)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -508,8 +528,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
restore_previous_kprobe(kcb);
else {
reset_current_kprobe();
- if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
- local_irq_enable();
}
preempt_enable_no_resched();
break;
@@ -553,6 +571,18 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
return 0;
}
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+ int ret;
+
+ if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+ local_irq_disable();
+ ret = kprobe_trap_handler(regs, trapnr);
+ if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+ local_irq_restore(regs->psw.mask & ~PSW_MASK_PER);
+ return ret;
+}
+
/*
* Wrapper routine to for handling exceptions.
*/
@@ -560,8 +590,12 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
struct die_args *args = (struct die_args *)data;
+ struct pt_regs *regs = args->regs;
int ret = NOTIFY_DONE;
+ if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+ local_irq_disable();
+
switch (val) {
case DIE_BPT:
if (kprobe_handler(args->regs))
@@ -572,16 +606,17 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
ret = NOTIFY_STOP;
break;
case DIE_TRAP:
- /* kprobe_running() needs smp_processor_id() */
- preempt_disable();
- if (kprobe_running() &&
- kprobe_fault_handler(args->regs, args->trapnr))
+ if (!preemptible() && kprobe_running() &&
+ kprobe_trap_handler(args->regs, args->trapnr))
ret = NOTIFY_STOP;
- preempt_enable();
break;
default:
break;
}
+
+ if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+ local_irq_restore(regs->psw.mask & ~PSW_MASK_PER);
+
return ret;
}
@@ -595,6 +630,7 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
/* setup return addr to the jprobe handler routine */
regs->psw.addr = (unsigned long)(jp->entry) | PSW_ADDR_AMODE;
+ regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
/* r14 is the function return address */
kcb->jprobe_saved_r14 = (unsigned long)regs->gprs[14];
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 38e641cdd977..45b405ca2567 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -20,18 +20,17 @@
static inline int gup_pte_range(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
unsigned long end, int write, struct page **pages, int *nr)
{
- unsigned long mask, result;
+ unsigned long mask;
pte_t *ptep, pte;
struct page *page;
- result = write ? 0 : _PAGE_RO;
- mask = result | _PAGE_INVALID | _PAGE_SPECIAL;
+ mask = (write ? _PAGE_RO : 0) | _PAGE_INVALID | _PAGE_SPECIAL;
ptep = ((pte_t *) pmd_deref(pmd)) + pte_index(addr);
do {
pte = *ptep;
barrier();
- if ((pte_val(pte) & mask) != result)
+ if ((pte_val(pte) & mask) != 0)
return 0;
VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
page = pte_page(pte);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5c075f562eba..7f217b3a50a8 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -193,6 +193,7 @@ config CPU_SH2
config CPU_SH2A
bool
select CPU_SH2
+ select UNCACHED_MAPPING
config CPU_SH3
bool
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 307b3a4a790b..9c8c6e1a2a15 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -133,10 +133,7 @@ machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
machdir-$(CONFIG_SH_SH03) += mach-sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear
machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh
-machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705
machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander
machdir-$(CONFIG_SH_MIGOR) += mach-migor
machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 9c94711aa6ca..2018c7ea4c93 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -81,13 +81,6 @@ config SH_7343_SOLUTION_ENGINE
Select 7343 SolutionEngine if configuring for a Hitachi
SH7343 (SH-Mobile 3AS) evaluation board.
-config SH_7751_SYSTEMH
- bool "SystemH7751R"
- depends on CPU_SUBTYPE_SH7751R
- help
- Select SystemH if you are configuring for a Renesas SystemH
- 7751R evaluation board.
-
config SH_HP6XX
bool "HP6XX"
select SYS_SUPPORTS_APM_EMULATION
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 38ef655cc0f0..be7d11d04b26 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -2,10 +2,12 @@
# Specific board support, not covered by a mach group.
#
obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
+obj-$(CONFIG_SH_SECUREEDGE5410) += board-secureedge5410.o
obj-$(CONFIG_SH_SH2007) += board-sh2007.o
obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
obj-$(CONFIG_SH_URQUELL) += board-urquell.o
obj-$(CONFIG_SH_SHMIN) += board-shmin.o
+obj-$(CONFIG_SH_EDOSK7705) += board-edosk7705.o
obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
obj-$(CONFIG_SH_ESPT) += board-espt.o
obj-$(CONFIG_SH_POLARIS) += board-polaris.o
diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c
new file mode 100644
index 000000000000..4cb3bb74c36f
--- /dev/null
+++ b/arch/sh/boards/board-edosk7705.c
@@ -0,0 +1,78 @@
+/*
+ * arch/sh/boards/renesas/edosk7705/setup.c
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for edosk7705 development
+ * board by S. Dunn, 2003.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smc91x.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+#define SMC_IOBASE 0xA2000000
+#define SMC_IO_OFFSET 0x300
+#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET)
+
+#define ETHERNET_IRQ 0x09
+
+static void __init sh_edosk7705_init_irq(void)
+{
+ make_imask_irq(ETHERNET_IRQ);
+}
+
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+ [0] = {
+ .start = SMC_IOADDR,
+ .end = SMC_IOADDR + SZ_32 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ETHERNET_IRQ,
+ .end = ETHERNET_IRQ,
+ .flags = IORESOURCE_IRQ ,
+ }
+};
+
+static struct platform_device smc91x_dev = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_res),
+ .resource = smc91x_res,
+
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
+};
+
+/* platform init code */
+static struct platform_device *edosk7705_devices[] __initdata = {
+ &smc91x_dev,
+};
+
+static int __init init_edosk7705_devices(void)
+{
+ return platform_add_devices(edosk7705_devices,
+ ARRAY_SIZE(edosk7705_devices));
+}
+__initcall(init_edosk7705_devices);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_edosk7705 __initmv = {
+ .mv_name = "EDOSK7705",
+ .mv_nr_irqs = 80,
+ .mv_init_irq = sh_edosk7705_init_irq,
+};
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/board-secureedge5410.c
index 331745dee379..32f875e8493d 100644
--- a/arch/sh/boards/mach-snapgear/setup.c
+++ b/arch/sh/boards/board-secureedge5410.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/sh/boards/snapgear/setup.c
- *
* Copyright (C) 2002 David McCullough <davidm@snapgear.com>
* Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
*
@@ -19,18 +17,19 @@
#include <linux/module.h>
#include <linux/sched.h>
#include <asm/machvec.h>
-#include <mach/snapgear.h>
+#include <mach/secureedge5410.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <cpu/timer.h>
+unsigned short secureedge5410_ioport;
+
/*
* EraseConfig handling functions
*/
-
static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
{
- (void)__raw_readb(0xb8000000); /* dummy read */
+ ctrl_delay(); /* dummy read */
printk("SnapGear: erase switch interrupt!\n");
@@ -39,21 +38,22 @@ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
static int __init eraseconfig_init(void)
{
+ unsigned int irq = evt2irq(0x240);
+
printk("SnapGear: EraseConfig init\n");
+
/* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+ if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
"Erase Config", NULL))
printk("SnapGear: failed to register IRQ%d for Reset witch\n",
- IRL0_IRQ);
+ irq);
else
printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
- IRL0_IRQ);
- return(0);
+ irq);
+ return 0;
}
-
module_init(eraseconfig_init);
-/****************************************************************************/
/*
* Initialize IRQ setting
*
@@ -62,7 +62,6 @@ module_init(eraseconfig_init);
* IRL2 = eth1
* IRL3 = crypto
*/
-
static void __init init_snapgear_IRQ(void)
{
printk("Setup SnapGear IRQ/IPR ...\n");
@@ -76,20 +75,5 @@ static void __init init_snapgear_IRQ(void)
static struct sh_machine_vector mv_snapgear __initmv = {
.mv_name = "SnapGear SecureEdge5410",
.mv_nr_irqs = 72,
-
- .mv_inb = snapgear_inb,
- .mv_inw = snapgear_inw,
- .mv_inl = snapgear_inl,
- .mv_outb = snapgear_outb,
- .mv_outw = snapgear_outw,
- .mv_outl = snapgear_outl,
-
- .mv_inb_p = snapgear_inb_p,
- .mv_inw_p = snapgear_inw,
- .mv_inl_p = snapgear_inl,
- .mv_outb_p = snapgear_outb_p,
- .mv_outw_p = snapgear_outw,
- .mv_outl_p = snapgear_outl,
-
.mv_init_irq = init_snapgear_IRQ,
};
diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
deleted file mode 100644
index cd54acb51499..000000000000
--- a/arch/sh/boards/mach-edosk7705/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the EDOSK7705 specific parts of the kernel
-#
-
-obj-y := setup.o io.o
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
deleted file mode 100644
index 5b9c57c43241..000000000000
--- a/arch/sh/boards/mach-edosk7705/io.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/sh/boards/renesas/edosk7705/io.c
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routines for Hitachi EDOSK7705 board.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/edosk7705.h>
-#include <asm/addrspace.h>
-
-#define SMC_IOADDR 0xA2000000
-
-/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
-{
- /*
- * SMC91C96 registers are 4 byte aligned rather than the
- * usual 2 byte!
- */
- if (port >= 0x300 && port < 0x320)
- return SMC_IOADDR + ((port - 0x300) * 2);
-
- maybebadio(port);
- return port;
-}
-
-/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
- * registers causes problems. So we bit-shift the value and read / write
- * in 2 byte chunks. Setting the low byte to 0 does not cause problems
- * now as odd byte writes are only made on the bit mask / interrupt
- * register. This may not be the case in future Mar-2003 SJD
- */
-unsigned char sh_edosk7705_inb(unsigned long port)
-{
- if (port >= 0x300 && port < 0x320 && port & 0x01)
- return __raw_readw(port - 1) >> 8;
-
- return __raw_readb(sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_outb(unsigned char value, unsigned long port)
-{
- if (port >= 0x300 && port < 0x320 && port & 0x01) {
- __raw_writew(((unsigned short)value << 8), port - 1);
- return;
- }
-
- __raw_writeb(value, sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
-{
- unsigned char *p = addr;
-
- while (count--)
- *p++ = sh_edosk7705_inb(port);
-}
-
-void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned char *p = (unsigned char *)addr;
-
- while (count--)
- sh_edosk7705_outb(*p++, port);
-}
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
deleted file mode 100644
index d59225e26fb9..000000000000
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/sh/boards/renesas/edosk7705/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for edosk7705 development
- * board by S. Dunn, 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/machvec.h>
-#include <mach/edosk7705.h>
-
-static void __init sh_edosk7705_init_irq(void)
-{
- /* This is the Ethernet interrupt */
- make_imask_irq(0x09);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_edosk7705 __initmv = {
- .mv_name = "EDOSK7705",
- .mv_nr_irqs = 80,
-
- .mv_inb = sh_edosk7705_inb,
- .mv_outb = sh_edosk7705_outb,
-
- .mv_insb = sh_edosk7705_insb,
- .mv_outsb = sh_edosk7705_outsb,
-
- .mv_init_irq = sh_edosk7705_init_irq,
-};
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 2960c659020e..acdafb0c6404 100644
--- a/arch/sh/boards/mach-microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
@@ -54,7 +54,7 @@
/*
* map I/O ports to memory-mapped addresses
*/
-static unsigned long microdev_isa_port2addr(unsigned long offset)
+void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
{
unsigned long result;
@@ -72,16 +72,6 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
* Configuration Registers
*/
result = IO_SUPERIO_PHYS + (offset << 1);
-#if 0
- } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
- offset == KBD_STATUS_REG) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
-#endif
} else if (((offset >= IO_IDE1_BASE) &&
(offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
(offset == IO_IDE1_MISC)) {
@@ -131,237 +121,5 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
result = PVR;
}
- return result;
-}
-
-#define PORT2ADDR(x) (microdev_isa_port2addr(x))
-
-static inline void delay(void)
-{
-#if defined(CONFIG_PCI)
- /* System board present, just make a dummy SRAM access. (CS0 will be
- mapped to PCI memory, probably good to avoid it.) */
- __raw_readw(0xa6800000);
-#else
- /* CS0 will be mapped to flash, ROM etc so safe to access it. */
- __raw_readw(0xa0000000);
-#endif
-}
-
-unsigned char microdev_inb(unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO)
- return microdev_pci_inb(port);
-#endif
- return *(volatile unsigned char*)PORT2ADDR(port);
-}
-
-unsigned short microdev_inw(unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO)
- return microdev_pci_inw(port);
-#endif
- return *(volatile unsigned short*)PORT2ADDR(port);
-}
-
-unsigned int microdev_inl(unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO)
- return microdev_pci_inl(port);
-#endif
- return *(volatile unsigned int*)PORT2ADDR(port);
-}
-
-void microdev_outw(unsigned short b, unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO) {
- microdev_pci_outw(b, port);
- return;
- }
-#endif
- *(volatile unsigned short*)PORT2ADDR(port) = b;
-}
-
-void microdev_outb(unsigned char b, unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO) {
- microdev_pci_outb(b, port);
- return;
- }
-#endif
-
- /*
- * There is a board feature with the current SH4-202 MicroDev in
- * that the 2 byte enables (nBE0 and nBE1) are tied together (and
- * to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
- * it is not possible to safely perform 8-bit writes to the
- * Ethernet registers, as 16-bits will be consumed from the Data
- * lines (corrupting the other byte). Hence, this function is
- * written to implement 16-bit read/modify/write for all byte-wide
- * accesses.
- *
- * Note: there is no problem with byte READS (even or odd).
- *
- * Sean McGoogan - 16th June 2003.
- */
- if ((port >= IO_LAN91C111_BASE) &&
- (port < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
- /*
- * Then are trying to perform a byte-write to the
- * LAN91C111. This needs special care.
- */
- if (port % 2 == 1) { /* is the port odd ? */
- /* unset bit-0, i.e. make even */
- const unsigned long evenPort = port-1;
- unsigned short word;
-
- /*
- * do a 16-bit read/write to write to 'port',
- * preserving even byte.
- *
- * Even addresses are bits 0-7
- * Odd addresses are bits 8-15
- */
- word = microdev_inw(evenPort);
- word = (word & 0xffu) | (b << 8);
- microdev_outw(word, evenPort);
- } else {
- /* else, we are trying to do an even byte write */
- unsigned short word;
-
- /*
- * do a 16-bit read/write to write to 'port',
- * preserving odd byte.
- *
- * Even addresses are bits 0-7
- * Odd addresses are bits 8-15
- */
- word = microdev_inw(port);
- word = (word & 0xff00u) | (b);
- microdev_outw(word, port);
- }
- } else {
- *(volatile unsigned char*)PORT2ADDR(port) = b;
- }
-}
-
-void microdev_outl(unsigned int b, unsigned long port)
-{
-#ifdef CONFIG_PCI
- if (port >= PCIBIOS_MIN_IO) {
- microdev_pci_outl(b, port);
- return;
- }
-#endif
- *(volatile unsigned int*)PORT2ADDR(port) = b;
-}
-
-unsigned char microdev_inb_p(unsigned long port)
-{
- unsigned char v = microdev_inb(port);
- delay();
- return v;
-}
-
-unsigned short microdev_inw_p(unsigned long port)
-{
- unsigned short v = microdev_inw(port);
- delay();
- return v;
-}
-
-unsigned int microdev_inl_p(unsigned long port)
-{
- unsigned int v = microdev_inl(port);
- delay();
- return v;
-}
-
-void microdev_outb_p(unsigned char b, unsigned long port)
-{
- microdev_outb(b, port);
- delay();
-}
-
-void microdev_outw_p(unsigned short b, unsigned long port)
-{
- microdev_outw(b, port);
- delay();
-}
-
-void microdev_outl_p(unsigned int b, unsigned long port)
-{
- microdev_outl(b, port);
- delay();
-}
-
-void microdev_insb(unsigned long port, void *buffer, unsigned long count)
-{
- volatile unsigned char *port_addr;
- unsigned char *buf = buffer;
-
- port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
- while (count--)
- *buf++ = *port_addr;
-}
-
-void microdev_insw(unsigned long port, void *buffer, unsigned long count)
-{
- volatile unsigned short *port_addr;
- unsigned short *buf = buffer;
-
- port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
- while (count--)
- *buf++ = *port_addr;
-}
-
-void microdev_insl(unsigned long port, void *buffer, unsigned long count)
-{
- volatile unsigned long *port_addr;
- unsigned int *buf = buffer;
-
- port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
- while (count--)
- *buf++ = *port_addr;
-}
-
-void microdev_outsb(unsigned long port, const void *buffer, unsigned long count)
-{
- volatile unsigned char *port_addr;
- const unsigned char *buf = buffer;
-
- port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
- while (count--)
- *port_addr = *buf++;
-}
-
-void microdev_outsw(unsigned long port, const void *buffer, unsigned long count)
-{
- volatile unsigned short *port_addr;
- const unsigned short *buf = buffer;
-
- port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
- while (count--)
- *port_addr = *buf++;
-}
-
-void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
-{
- volatile unsigned long *port_addr;
- const unsigned int *buf = buffer;
-
- port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
- while (count--)
- *port_addr = *buf++;
+ return (void __iomem *)result;
}
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index d1df2a4fb9b8..d8a747291e03 100644
--- a/arch/sh/boards/mach-microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
@@ -195,27 +195,6 @@ device_initcall(microdev_devices_setup);
static struct sh_machine_vector mv_sh4202_microdev __initmv = {
.mv_name = "SH4-202 MicroDev",
.mv_nr_irqs = 72,
-
- .mv_inb = microdev_inb,
- .mv_inw = microdev_inw,
- .mv_inl = microdev_inl,
- .mv_outb = microdev_outb,
- .mv_outw = microdev_outw,
- .mv_outl = microdev_outl,
-
- .mv_inb_p = microdev_inb_p,
- .mv_inw_p = microdev_inw_p,
- .mv_inl_p = microdev_inl_p,
- .mv_outb_p = microdev_outb_p,
- .mv_outw_p = microdev_outw_p,
- .mv_outl_p = microdev_outl_p,
-
- .mv_insb = microdev_insb,
- .mv_insw = microdev_insw,
- .mv_insl = microdev_insl,
- .mv_outsb = microdev_outsb,
- .mv_outsw = microdev_outsw,
- .mv_outsl = microdev_outsl,
-
+ .mv_ioport_map = microdev_ioport_map,
.mv_init_irq = init_microdev_irq,
};
diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
index 63e7ed699f39..5c9eaa0535b9 100644
--- a/arch/sh/boards/mach-se/7206/Makefile
+++ b/arch/sh/boards/mach-se/7206/Makefile
@@ -2,4 +2,4 @@
# Makefile for the 7206 SolutionEngine specific parts of the kernel
#
-obj-y := setup.o io.o irq.o
+obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
deleted file mode 100644
index adadc77532ee..000000000000
--- a/arch/sh/boards/mach-se/7206/io.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7206.h>
-
-
-static inline void delay(void)
-{
- __raw_readw(0x20000000); /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
- PC-like io ports are located at upper half byte of 16-bit word which
- can be accessed only with 16-bit wide. */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
- if (port >= 0x2000 && port < 0x2020)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- else if (port >= 0x300 && port < 0x310)
- return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
- return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
- return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
- unsigned long v;
-
- v = (*port2adr(port)) & 0xff;
- delay();
- return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
- return *port2adr(port);
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
- *(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
- *(port2adr(port)) = value;
- delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
- *port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u8 *ap = addr;
-
- while (count--)
- *ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u16 *ap = addr;
- while (count--)
- *ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u8 *ap = addr;
-
- while (count--)
- *p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u16 *ap = addr;
- while (count--)
- *p = *ap++;
-}
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index 883b21eacaa6..d961949600fd 100644
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -139,11 +139,13 @@ void __init init_se7206_IRQ(void)
make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
make_se7206_irq(IRQ1_IRQ); /* ATA */
make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
- __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+ __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
/* FPGA System register setup*/
__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
+
/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
__raw_writew(0x0001,INTSEL);
}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
index 8f5c65d43d1d..7f4871c71a01 100644
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -86,20 +86,5 @@ __initcall(se7206_devices_setup);
static struct sh_machine_vector mv_se __initmv = {
.mv_name = "SolutionEngine",
.mv_nr_irqs = 256,
- .mv_inb = se7206_inb,
- .mv_inw = se7206_inw,
- .mv_outb = se7206_outb,
- .mv_outw = se7206_outw,
-
- .mv_inb_p = se7206_inb_p,
- .mv_inw_p = se7206_inw,
- .mv_outb_p = se7206_outb_p,
- .mv_outw_p = se7206_outw,
-
- .mv_insb = se7206_insb,
- .mv_insw = se7206_insw,
- .mv_outsb = se7206_outsb,
- .mv_outsw = se7206_outsw,
-
.mv_init_irq = init_se7206_IRQ,
};
diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
index 8e624b06d5ea..43ea14feef51 100644
--- a/arch/sh/boards/mach-se/770x/Makefile
+++ b/arch/sh/boards/mach-se/770x/Makefile
@@ -2,4 +2,4 @@
# Makefile for the 770x SolutionEngine specific parts of the kernel
#
-obj-y := setup.o io.o irq.o
+obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
deleted file mode 100644
index 28833c8786ea..000000000000
--- a/arch/sh/boards/mach-se/770x/io.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-
-/* MS7750 requires special versions of in*, out* routines, since
- PC-like io ports are located at upper half byte of 16-bit word which
- can be accessed only with 16-bit wide. */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
- if (port & 0xff000000)
- return ( volatile __u16 *) port;
- if (port >= 0x2000)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- else if (port >= 0x1000)
- return (volatile __u16 *) (PA_83902 + (port << 1));
- else
- return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
- /* For IDE registers, value is not shifted */
- if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
- return 0;
- else
- return 1;
-}
-
-unsigned char se_inb(unsigned long port)
-{
- if (shifted_port(port))
- return (*port2adr(port) >> 8);
- else
- return (*port2adr(port))&0xff;
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
- unsigned long v;
-
- if (shifted_port(port))
- v = (*port2adr(port) >> 8);
- else
- v = (*port2adr(port))&0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
- if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
- maybebadio(port);
- return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
- if (shifted_port(port))
- *(port2adr(port)) = value << 8;
- else
- *(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
- if (shifted_port(port))
- *(port2adr(port)) = value << 8;
- else
- *(port2adr(port)) = value;
- ctrl_delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
- if (port >= 0x2000)
- *port2adr(port) = value;
- else
- maybebadio(port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
- maybebadio(port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u8 *ap = addr;
-
- if (shifted_port(port)) {
- while (count--)
- *ap++ = *p >> 8;
- } else {
- while (count--)
- *ap++ = *p;
- }
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u16 *ap = addr;
- while (count--)
- *ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u8 *ap = addr;
-
- if (shifted_port(port)) {
- while (count--)
- *p = *ap++ << 8;
- } else {
- while (count--)
- *p = *ap++;
- }
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u16 *ap = addr;
-
- while (count--)
- *p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
index 66d39d1b0901..31330c65c0ce 100644
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -195,27 +195,5 @@ static struct sh_machine_vector mv_se __initmv = {
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
.mv_nr_irqs = 104,
#endif
-
- .mv_inb = se_inb,
- .mv_inw = se_inw,
- .mv_inl = se_inl,
- .mv_outb = se_outb,
- .mv_outw = se_outw,
- .mv_outl = se_outl,
-
- .mv_inb_p = se_inb_p,
- .mv_inw_p = se_inw,
- .mv_inl_p = se_inl,
- .mv_outb_p = se_outb_p,
- .mv_outw_p = se_outw,
- .mv_outl_p = se_outl,
-
- .mv_insb = se_insb,
- .mv_insw = se_insw,
- .mv_insl = se_insl,
- .mv_outsb = se_outsb,
- .mv_outsw = se_outsw,
- .mv_outsl = se_outsl,
-
.mv_init_irq = init_se_IRQ,
};
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index e6f4341bfe6e..a338fd9d5039 100644
--- a/arch/sh/boards/mach-se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
@@ -2,4 +2,4 @@
# Makefile for the 7751 SolutionEngine specific parts of the kernel
#
-obj-y := setup.o io.o irq.o
+obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
deleted file mode 100644
index 6e75bd4459e5..000000000000
--- a/arch/sh/boards/mach-se/7751/io.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
- if (port >= 0x2000)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- maybebadio((unsigned long)port);
- return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned char *)port;
- else
- return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
- unsigned char v;
-
- if (PXSEG(port))
- v = *(volatile unsigned char *)port;
- else
- v = (*port2adr(port)) & 0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned short *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned long *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else
- *(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else
- *(port2adr(port)) = value;
- ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned short *)port = value;
- else if (port >= 0x2000)
- *port2adr(port) = value;
- else
- maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned long *)port = value;
- else
- maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
index 50572512e3e8..9fbc51beb181 100644
--- a/arch/sh/boards/mach-se/7751/setup.c
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -56,23 +56,5 @@ __initcall(se7751_devices_setup);
static struct sh_machine_vector mv_7751se __initmv = {
.mv_name = "7751 SolutionEngine",
.mv_nr_irqs = 72,
-
- .mv_inb = sh7751se_inb,
- .mv_inw = sh7751se_inw,
- .mv_inl = sh7751se_inl,
- .mv_outb = sh7751se_outb,
- .mv_outw = sh7751se_outw,
- .mv_outl = sh7751se_outl,
-
- .mv_inb_p = sh7751se_inb_p,
- .mv_inw_p = sh7751se_inw,
- .mv_inl_p = sh7751se_inl,
- .mv_outb_p = sh7751se_outb_p,
- .mv_outw_p = sh7751se_outw,
- .mv_outl_p = sh7751se_outl,
-
- .mv_insl = sh7751se_insl,
- .mv_outsl = sh7751se_outsl,
-
.mv_init_irq = init_7751se_IRQ,
};
diff --git a/arch/sh/boards/mach-snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
deleted file mode 100644
index d2d2f4b6a502..000000000000
--- a/arch/sh/boards/mach-snapgear/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SnapGear specific parts of the kernel
-#
-
-obj-y := setup.o io.o
diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
deleted file mode 100644
index 476650e42dbc..000000000000
--- a/arch/sh/boards/mach-snapgear/io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2002 David McCullough <davidm@snapgear.com>
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#ifdef CONFIG_SH_SECUREEDGE5410
-unsigned short secureedge5410_ioport;
-#endif
-
-static inline volatile __u16 *port2adr(unsigned int port)
-{
- maybebadio((unsigned long)port);
- return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-unsigned char snapgear_inb(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned char *)port;
- else
- return (*port2adr(port)) & 0xff;
-}
-
-unsigned char snapgear_inb_p(unsigned long port)
-{
- unsigned char v;
-
- if (PXSEG(port))
- v = *(volatile unsigned char *)port;
- else
- v = (*port2adr(port))&0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short snapgear_inw(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned short *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int snapgear_inl(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned long *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-void snapgear_outb(unsigned char value, unsigned long port)
-{
-
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else
- *(port2adr(port)) = value;
-}
-
-void snapgear_outb_p(unsigned char value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else
- *(port2adr(port)) = value;
- ctrl_delay();
-}
-
-void snapgear_outw(unsigned short value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned short *)port = value;
- else if (port >= 0x2000)
- *port2adr(port) = value;
- else
- maybebadio(port);
-}
-
-void snapgear_outl(unsigned int value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned long *)port = value;
- else
- maybebadio(port);
-}
-
-void snapgear_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(port);
-}
-
-void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
deleted file mode 100644
index 2cc6a23d9d39..000000000000
--- a/arch/sh/boards/mach-systemh/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for the SystemH specific parts of the kernel
-#
-
-obj-y := setup.o irq.o io.o
-
-# XXX: This wants to be consolidated in arch/sh/drivers/pci, and more
-# importantly, with the generic sh7751_pcic_init() code. For now, we'll
-# just abuse the hell out of kbuild, because we can..
-
-obj-$(CONFIG_PCI) += pci.o
-pci-y := ../../se/7751/pci.o
-
diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c
deleted file mode 100644
index 15577ff1f715..000000000000
--- a/arch/sh/boards/mach-systemh/io.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/io.c
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 Systemh.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <mach/systemh7751.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area
- of smc lan chip*/
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
- if (port >= 0x2000)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- maybebadio((unsigned long)port);
- return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-unsigned char sh7751systemh_inb(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned char *)port;
- else if (port <= 0x3F1)
- return *(volatile unsigned char *)ETHER_IOMAP(port);
- else
- return (*port2adr(port))&0xff;
-}
-
-unsigned char sh7751systemh_inb_p(unsigned long port)
-{
- unsigned char v;
-
- if (PXSEG(port))
- v = *(volatile unsigned char *)port;
- else if (port <= 0x3F1)
- v = *(volatile unsigned char *)ETHER_IOMAP(port);
- else
- v = (*port2adr(port))&0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short sh7751systemh_inw(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned short *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else if (port <= 0x3F1)
- return *(volatile unsigned int *)ETHER_IOMAP(port);
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int sh7751systemh_inl(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned long *)port;
- else if (port >= 0x2000)
- return *port2adr(port);
- else if (port <= 0x3F1)
- return *(volatile unsigned int *)ETHER_IOMAP(port);
- else
- maybebadio(port);
- return 0;
-}
-
-void sh7751systemh_outb(unsigned char value, unsigned long port)
-{
-
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else if (port <= 0x3F1)
- *(volatile unsigned char *)ETHER_IOMAP(port) = value;
- else
- *(port2adr(port)) = value;
-}
-
-void sh7751systemh_outb_p(unsigned char value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else if (port <= 0x3F1)
- *(volatile unsigned char *)ETHER_IOMAP(port) = value;
- else
- *(port2adr(port)) = value;
- ctrl_delay();
-}
-
-void sh7751systemh_outw(unsigned short value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned short *)port = value;
- else if (port >= 0x2000)
- *port2adr(port) = value;
- else if (port <= 0x3F1)
- *(volatile unsigned short *)ETHER_IOMAP(port) = value;
- else
- maybebadio(port);
-}
-
-void sh7751systemh_outl(unsigned int value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned long *)port = value;
- else
- maybebadio(port);
-}
-
-void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count)
-{
- unsigned char *p = addr;
- while (count--) *p++ = sh7751systemh_inb(port);
-}
-
-void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count)
-{
- unsigned short *p = addr;
- while (count--) *p++ = sh7751systemh_inw(port);
-}
-
-void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(port);
-}
-
-void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned char *p = (unsigned char*)addr;
- while (count--) sh7751systemh_outb(*p++, port);
-}
-
-void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned short *p = (unsigned short*)addr;
- while (count--) sh7751systemh_outw(*p++, port);
-}
-
-void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
deleted file mode 100644
index e5ee13adeff4..000000000000
--- a/arch/sh/boards/mach-systemh/irq.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by
- * Jonathan Short.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <mach/systemh7751.h>
-#include <asm/smc37c93x.h>
-
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
-static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
-
-static void disable_systemh_irq(struct irq_data *data)
-{
- unsigned long val, mask = 0x01 << 1;
-
- /* Clear the "irq"th bit in the mask and set it in the request */
- val = __raw_readl((unsigned long)systemh_irq_mask_register);
- val &= ~mask;
- __raw_writel(val, (unsigned long)systemh_irq_mask_register);
-
- val = __raw_readl((unsigned long)systemh_irq_request_register);
- val |= mask;
- __raw_writel(val, (unsigned long)systemh_irq_request_register);
-}
-
-static void enable_systemh_irq(struct irq_data *data)
-{
- unsigned long val, mask = 0x01 << 1;
-
- /* Set "irq"th bit in the mask register */
- val = __raw_readl((unsigned long)systemh_irq_mask_register);
- val |= mask;
- __raw_writel(val, (unsigned long)systemh_irq_mask_register);
-}
-
-static struct irq_chip systemh_irq_type = {
- .name = "SystemH Register",
- .irq_unmask = enable_systemh_irq,
- .irq_mask = disable_systemh_irq,
-};
-
-void make_systemh_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- set_irq_chip_and_handler(irq, &systemh_irq_type, handle_level_irq);
- disable_systemh_irq(irq_get_irq_data(irq));
-}
diff --git a/arch/sh/boards/mach-systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
deleted file mode 100644
index 219fd800a43f..000000000000
--- a/arch/sh/boards/mach-systemh/setup.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2003 Paul Mundt
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by Jonathan Short.
- *
- * Rewritten for 2.6 by Paul Mundt.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <mach/systemh7751.h>
-
-extern void make_systemh_irq(unsigned int irq);
-
-/*
- * Initialize IRQ setting
- */
-static void __init sh7751systemh_init_irq(void)
-{
- make_systemh_irq(0xb); /* Ethernet interrupt */
-}
-
-static struct sh_machine_vector mv_7751systemh __initmv = {
- .mv_name = "7751 SystemH",
- .mv_nr_irqs = 72,
-
- .mv_inb = sh7751systemh_inb,
- .mv_inw = sh7751systemh_inw,
- .mv_inl = sh7751systemh_inl,
- .mv_outb = sh7751systemh_outb,
- .mv_outw = sh7751systemh_outw,
- .mv_outl = sh7751systemh_outl,
-
- .mv_inb_p = sh7751systemh_inb_p,
- .mv_inw_p = sh7751systemh_inw,
- .mv_inl_p = sh7751systemh_inl,
- .mv_outb_p = sh7751systemh_outb_p,
- .mv_outw_p = sh7751systemh_outw,
- .mv_outl_p = sh7751systemh_outl,
-
- .mv_insb = sh7751systemh_insb,
- .mv_insw = sh7751systemh_insw,
- .mv_insl = sh7751systemh_insl,
- .mv_outsb = sh7751systemh_outsb,
- .mv_outsw = sh7751systemh_outsw,
- .mv_outsl = sh7751systemh_outsl,
-
- .mv_init_irq = sh7751systemh_init_irq,
-};
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/secureedge5410_defconfig
index 7eae4e59d7f0..7eae4e59d7f0 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/secureedge5410_defconfig
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
deleted file mode 100644
index b58dfc505efe..000000000000
--- a/arch/sh/configs/systemh_defconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7751_SYSTEMH=y
-CONFIG_PREEMPT=y
-# CONFIG_STANDALONE is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=1024
-# CONFIG_INPUT is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_HW_RANDOM=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
index 446b3831c214..3d1ae2bfaa6f 100644
--- a/arch/sh/include/asm/addrspace.h
+++ b/arch/sh/include/asm/addrspace.h
@@ -44,10 +44,10 @@
/*
* These will never work in 32-bit, don't even bother.
*/
-#define P1SEGADDR(a) __futile_remapping_attempt
-#define P2SEGADDR(a) __futile_remapping_attempt
-#define P3SEGADDR(a) __futile_remapping_attempt
-#define P4SEGADDR(a) __futile_remapping_attempt
+#define P1SEGADDR(a) ({ (void)(a); BUG(); NULL; })
+#define P2SEGADDR(a) ({ (void)(a); BUG(); NULL; })
+#define P3SEGADDR(a) ({ (void)(a); BUG(); NULL; })
+#define P4SEGADDR(a) ({ (void)(a); BUG(); NULL; })
#endif
#endif /* P1SEG */
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index a15f1058bbf4..083ea068e819 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -66,7 +66,6 @@ static inline unsigned long long neff_sign_extend(unsigned long val)
#define PHYS_ADDR_MASK29 0x1fffffff
#define PHYS_ADDR_MASK32 0xffffffff
-#ifdef CONFIG_PMB
static inline unsigned long phys_addr_mask(void)
{
/* Is the MMU in 29bit mode? */
@@ -75,17 +74,6 @@ static inline unsigned long phys_addr_mask(void)
return PHYS_ADDR_MASK32;
}
-#elif defined(CONFIG_32BIT)
-static inline unsigned long phys_addr_mask(void)
-{
- return PHYS_ADDR_MASK32;
-}
-#else
-static inline unsigned long phys_addr_mask(void)
-{
- return PHYS_ADDR_MASK29;
-}
-#endif
#define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK)
#define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT)
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 46d5179c9f49..e3c73cdd8c90 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -199,10 +199,13 @@ extern unsigned long get_wchan(struct task_struct *p);
#define ARCH_HAS_PREFETCHW
static inline void prefetch(void *x)
{
- __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
+ __builtin_prefetch(x, 0, 3);
}
-#define prefetchw(x) prefetch(x)
+static inline void prefetchw(void *x)
+{
+ __builtin_prefetch(x, 1, 3);
+}
#endif
#endif /* __KERNEL__ */
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index 1f1af5afff03..10c8b1823a18 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -10,6 +10,7 @@
#include <linux/compiler.h>
#include <linux/linkage.h>
#include <asm/types.h>
+#include <asm/uncached.h>
#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
@@ -137,9 +138,6 @@ extern unsigned int instruction_size(unsigned int insn);
#define instruction_size(insn) (4)
#endif
-extern unsigned long cached_to_uncached;
-extern unsigned long uncached_size;
-
void per_cpu_trap_init(void);
void default_idle(void);
void cpu_idle_wait(void);
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index c941b2739405..a4ad1cd9bc4d 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -145,42 +145,6 @@ do { \
__restore_dsp(prev); \
} while (0)
-/*
- * Jump to uncached area.
- * When handling TLB or caches, we need to do it from an uncached area.
- */
-#define jump_to_uncached() \
-do { \
- unsigned long __dummy; \
- \
- __asm__ __volatile__( \
- "mova 1f, %0\n\t" \
- "add %1, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1:" \
- : "=&z" (__dummy) \
- : "r" (cached_to_uncached)); \
-} while (0)
-
-/*
- * Back to cached area.
- */
-#define back_to_cached() \
-do { \
- unsigned long __dummy; \
- ctrl_barrier(); \
- __asm__ __volatile__( \
- "mov.l 1f, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1: .long 2f\n" \
- "2:" \
- : "=&r" (__dummy)); \
-} while (0)
-
#ifdef CONFIG_CPU_HAS_SR_RB
#define lookup_exception_vector() \
({ \
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
index 36338646dfc8..8593bc8d1a4e 100644
--- a/arch/sh/include/asm/system_64.h
+++ b/arch/sh/include/asm/system_64.h
@@ -34,9 +34,6 @@ do { \
&next->thread); \
} while (0)
-#define jump_to_uncached() do { } while (0)
-#define back_to_cached() do { } while (0)
-
#define __icbi(addr) __asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr))
#define __ocbp(addr) __asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr))
#define __ocbi(addr) __asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr))
diff --git a/arch/sh/include/asm/uncached.h b/arch/sh/include/asm/uncached.h
index e3419f96626a..6f8816b79cf1 100644
--- a/arch/sh/include/asm/uncached.h
+++ b/arch/sh/include/asm/uncached.h
@@ -4,15 +4,55 @@
#include <linux/bug.h>
#ifdef CONFIG_UNCACHED_MAPPING
+extern unsigned long cached_to_uncached;
+extern unsigned long uncached_size;
extern unsigned long uncached_start, uncached_end;
extern int virt_addr_uncached(unsigned long kaddr);
extern void uncached_init(void);
extern void uncached_resize(unsigned long size);
+
+/*
+ * Jump to uncached area.
+ * When handling TLB or caches, we need to do it from an uncached area.
+ */
+#define jump_to_uncached() \
+do { \
+ unsigned long __dummy; \
+ \
+ __asm__ __volatile__( \
+ "mova 1f, %0\n\t" \
+ "add %1, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1:" \
+ : "=&z" (__dummy) \
+ : "r" (cached_to_uncached)); \
+} while (0)
+
+/*
+ * Back to cached area.
+ */
+#define back_to_cached() \
+do { \
+ unsigned long __dummy; \
+ ctrl_barrier(); \
+ __asm__ __volatile__( \
+ "mov.l 1f, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1: .long 2f\n" \
+ "2:" \
+ : "=&r" (__dummy)); \
+} while (0)
#else
#define virt_addr_uncached(kaddr) (0)
#define uncached_init() do { } while (0)
#define uncached_resize(size) BUG()
+#define jump_to_uncached() do { } while (0)
+#define back_to_cached() do { } while (0)
#endif
#endif /* __ASM_SH_UNCACHED_H */
diff --git a/arch/sh/include/mach-common/mach/edosk7705.h b/arch/sh/include/mach-common/mach/edosk7705.h
deleted file mode 100644
index efc43b323466..000000000000
--- a/arch/sh/include/mach-common/mach/edosk7705.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_SH_EDOSK7705_H
-#define __ASM_SH_EDOSK7705_H
-
-#define __IO_PREFIX sh_edosk7705
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_EDOSK7705_H */
diff --git a/arch/sh/include/mach-common/mach/microdev.h b/arch/sh/include/mach-common/mach/microdev.h
index 1aed15856e11..dcb05fa8c164 100644
--- a/arch/sh/include/mach-common/mach/microdev.h
+++ b/arch/sh/include/mach-common/mach/microdev.h
@@ -68,13 +68,4 @@ extern void microdev_print_fpga_intc_status(void);
#define __IO_PREFIX microdev
#include <asm/io_generic.h>
-#if defined(CONFIG_PCI)
-unsigned char microdev_pci_inb(unsigned long port);
-unsigned short microdev_pci_inw(unsigned long port);
-unsigned long microdev_pci_inl(unsigned long port);
-void microdev_pci_outb(unsigned char data, unsigned long port);
-void microdev_pci_outw(unsigned short data, unsigned long port);
-void microdev_pci_outl(unsigned long data, unsigned long port);
-#endif
-
#endif /* __ASM_SH_MICRODEV_H */
diff --git a/arch/sh/include/mach-common/mach/snapgear.h b/arch/sh/include/mach-common/mach/secureedge5410.h
index 042d95f51c4d..3653b9a4bacc 100644
--- a/arch/sh/include/mach-common/mach/snapgear.h
+++ b/arch/sh/include/mach-common/mach/secureedge5410.h
@@ -12,30 +12,9 @@
#ifndef _ASM_SH_IO_SNAPGEAR_H
#define _ASM_SH_IO_SNAPGEAR_H
-#if defined(CONFIG_CPU_SH4)
-/*
- * The external interrupt lines, these take up ints 0 - 15 inclusive
- * depending on the priority for the interrupt. In fact the priority
- * is the interrupt :-)
- */
-
-#define IRL0_IRQ 2
-#define IRL0_PRIORITY 13
-
-#define IRL1_IRQ 5
-#define IRL1_PRIORITY 10
-
-#define IRL2_IRQ 8
-#define IRL2_PRIORITY 7
-
-#define IRL3_IRQ 11
-#define IRL3_PRIORITY 4
-#endif
-
#define __IO_PREFIX snapgear
#include <asm/io_generic.h>
-#ifdef CONFIG_SH_SECUREEDGE5410
/*
* We need to remember what was written to the ioport as some bits
* are shared with other functions and you cannot read back what was
@@ -66,6 +45,5 @@ extern unsigned short secureedge5410_ioport;
((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
#define SECUREEDGE_READ_IOPORT() \
((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-#endif
#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/arch/sh/include/mach-common/mach/systemh7751.h b/arch/sh/include/mach-common/mach/systemh7751.h
deleted file mode 100644
index 4161122c84ef..000000000000
--- a/arch/sh/include/mach-common/mach/systemh7751.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H
-#define __ASM_SH_SYSTEMH_7751SYSTEMH_H
-
-/*
- * linux/include/asm-sh/systemh/7751systemh.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SystemH support
-
- * Modified for 7751 SystemH by
- * Jonathan Short, 2002.
- */
-
-/* Box specific addresses. */
-
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0x01000000 /* EPROM */
-#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0x12000000
-#define PA_EXT4_SIZE 0x02000000
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */
-
-#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */
-#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */
-#define PA_LED 0xba000000 /* LED */
-#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */
-
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_MODE (PA_MRSHPC + 4)
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA (PA_BCR + 0)
-#define BCR_ILCRB (PA_BCR + 2)
-#define BCR_ILCRC (PA_BCR + 4)
-#define BCR_ILCRD (PA_BCR + 6)
-#define BCR_ILCRE (PA_BCR + 8)
-#define BCR_ILCRF (PA_BCR + 10)
-#define BCR_ILCRG (PA_BCR + 12)
-
-#define IRQ_79C973 13
-
-#define __IO_PREFIX sh7751systemh
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index 4eabc68cd753..b601fa3978d1 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -110,7 +110,7 @@ static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
return 0;
}
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long frqcr3;
unsigned int tmp;
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 2d9700c6b53a..0fe2e9329cb2 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -48,7 +48,7 @@ static struct clk r_clk = {
* Default rate for the root input clock, reset this with clk_set_rate()
* from the platform code.
*/
-struct clk extal_clk = {
+static struct clk extal_clk = {
.rate = 33333333,
};
@@ -111,7 +111,7 @@ static struct clk div3_clk = {
.parent = &pll_clk,
};
-struct clk *main_clks[] = {
+static struct clk *main_clks[] = {
&r_clk,
&extal_clk,
&fll_clk,
@@ -156,7 +156,7 @@ struct clk div4_clks[DIV4_NR] = {
enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
-struct clk div6_clks[DIV6_NR] = {
+static struct clk div6_clks[DIV6_NR] = {
[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
[DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
[DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 81f58371613d..8c6a350df751 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -88,7 +88,7 @@ asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
}
if (op & CACHEFLUSH_I)
- flush_cache_all();
+ flush_icache_range(addr, addr+len);
up_read(&current->mm->mmap_sem);
return 0;
diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
index 3b6eb34c43fa..3e70f851cdc6 100644
--- a/arch/sh/kernel/vsyscall/vsyscall-trapa.S
+++ b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
@@ -8,9 +8,9 @@ __kernel_vsyscall:
* fill out .eh_frame -- PFM. */
.LEND_vsyscall:
.size __kernel_vsyscall,.-.LSTART_vsyscall
- .previous
.section .eh_frame,"a",@progbits
+ .previous
.LCIE:
.ualong .LCIE_end - .LCIE_start
.LCIE_start:
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 09370392aff1..c3e61b366493 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -79,7 +79,7 @@ config 29BIT
config 32BIT
bool
- default y if CPU_SH5
+ default y if CPU_SH5 || !MMU
config PMB
bool "Support 32-bit physical addressing through PMB"
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 038793286990..40733a952402 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -79,21 +79,20 @@ void dma_generic_free_coherent(struct device *dev, size_t size,
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
-#if defined(CONFIG_CPU_SH5) || defined(CONFIG_PMB)
- void *p1addr = vaddr;
-#else
- void *p1addr = (void*) P1SEGADDR((unsigned long)vaddr);
-#endif
+ void *addr;
+
+ addr = __in_29bit_mode() ?
+ (void *)P1SEGADDR((unsigned long)vaddr) : vaddr;
switch (direction) {
case DMA_FROM_DEVICE: /* invalidate only */
- __flush_invalidate_region(p1addr, size);
+ __flush_invalidate_region(addr, size);
break;
case DMA_TO_DEVICE: /* writeback only */
- __flush_wback_region(p1addr, size);
+ __flush_wback_region(addr, size);
break;
case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- __flush_purge_region(p1addr, size);
+ __flush_purge_region(addr, size);
break;
default:
BUG();
diff --git a/arch/sh/mm/uncached.c b/arch/sh/mm/uncached.c
index 8a4eca551fc0..a7767da815e9 100644
--- a/arch/sh/mm/uncached.c
+++ b/arch/sh/mm/uncached.c
@@ -28,7 +28,7 @@ EXPORT_SYMBOL(virt_addr_uncached);
void __init uncached_init(void)
{
-#ifdef CONFIG_29BIT
+#if defined(CONFIG_29BIT) || !defined(CONFIG_MMU)
uncached_start = P2SEG;
#else
uncached_start = memory_end;
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 9f56eb978024..0e68465e7b50 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -26,7 +26,6 @@ HD64461 HD64461
7724SE SH_7724_SOLUTION_ENGINE
7751SE SH_7751_SOLUTION_ENGINE
7780SE SH_7780_SOLUTION_ENGINE
-7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
DREAMCAST SH_DREAMCAST
SNAPGEAR SH_SECUREEDGE5410
diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c
index 7524689b03d2..16582d85368a 100644
--- a/arch/sparc/kernel/leon_smp.c
+++ b/arch/sparc/kernel/leon_smp.c
@@ -12,7 +12,6 @@
#include <linux/sched.h>
#include <linux/threads.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/init.h>
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index e6375a750d9a..6db18c6927fb 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -17,7 +17,6 @@
#include <linux/resource.h>
#include <linux/times.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c
index 675c9e11ada5..42b282fa6112 100644
--- a/arch/sparc/kernel/sys_sparc_32.c
+++ b/arch/sparc/kernel/sys_sparc_32.c
@@ -19,7 +19,6 @@
#include <linux/mman.h>
#include <linux/utsname.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/ipc.h>
#include <asm/uaccess.h>
diff --git a/arch/sparc/kernel/unaligned_32.c b/arch/sparc/kernel/unaligned_32.c
index 12b9f352595f..4491f4cb2695 100644
--- a/arch/sparc/kernel/unaligned_32.c
+++ b/arch/sparc/kernel/unaligned_32.c
@@ -16,7 +16,6 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/perf_event.h>
enum direction {
diff --git a/arch/sparc/kernel/windows.c b/arch/sparc/kernel/windows.c
index b351770cbdd6..3107381e576d 100644
--- a/arch/sparc/kernel/windows.c
+++ b/arch/sparc/kernel/windows.c
@@ -9,7 +9,6 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 07ec8a865c1d..e11b5fcb70eb 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -329,6 +329,18 @@ endmenu # Tilera-specific configuration
menu "Bus options"
+config PCI
+ bool "PCI support"
+ default y
+ select PCI_DOMAINS
+ ---help---
+ Enable PCI root complex support, so PCIe endpoint devices can
+ be attached to the Tile chip. Many, but not all, PCI devices
+ are supported under Tilera's root complex driver.
+
+config PCI_DOMAINS
+ bool
+
config NO_IOMEM
def_bool !PCI
diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h
index c5741da4eeac..14a3f8556ace 100644
--- a/arch/tile/include/asm/cacheflush.h
+++ b/arch/tile/include/asm/cacheflush.h
@@ -137,4 +137,56 @@ static inline void finv_buffer(void *buffer, size_t size)
mb_incoherent();
}
+/*
+ * Flush & invalidate a VA range that is homed remotely on a single core,
+ * waiting until the memory controller holds the flushed values.
+ */
+static inline void finv_buffer_remote(void *buffer, size_t size)
+{
+ char *p;
+ int i;
+
+ /*
+ * Flush and invalidate the buffer out of the local L1/L2
+ * and request the home cache to flush and invalidate as well.
+ */
+ __finv_buffer(buffer, size);
+
+ /*
+ * Wait for the home cache to acknowledge that it has processed
+ * all the flush-and-invalidate requests. This does not mean
+ * that the flushed data has reached the memory controller yet,
+ * but it does mean the home cache is processing the flushes.
+ */
+ __insn_mf();
+
+ /*
+ * Issue a load to the last cache line, which can't complete
+ * until all the previously-issued flushes to the same memory
+ * controller have also completed. If we weren't striping
+ * memory, that one load would be sufficient, but since we may
+ * be, we also need to back up to the last load issued to
+ * another memory controller, which would be the point where
+ * we crossed an 8KB boundary (the granularity of striping
+ * across memory controllers). Keep backing up and doing this
+ * until we are before the beginning of the buffer, or have
+ * hit all the controllers.
+ */
+ for (i = 0, p = (char *)buffer + size - 1;
+ i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer;
+ ++i) {
+ const unsigned long STRIPE_WIDTH = 8192;
+
+ /* Force a load instruction to issue. */
+ *(volatile char *)p;
+
+ /* Jump to end of previous stripe. */
+ p -= STRIPE_WIDTH;
+ p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1));
+ }
+
+ /* Wait for the loads (and thus flushes) to have completed. */
+ __insn_mf();
+}
+
#endif /* _ASM_TILE_CACHEFLUSH_H */
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
index ee43328713ab..d3cbb9b14cbe 100644
--- a/arch/tile/include/asm/io.h
+++ b/arch/tile/include/asm/io.h
@@ -55,9 +55,6 @@ extern void iounmap(volatile void __iomem *addr);
#define ioremap_writethrough(physaddr, size) ioremap(physaddr, size)
#define ioremap_fullcache(physaddr, size) ioremap(physaddr, size)
-void __iomem *ioport_map(unsigned long port, unsigned int len);
-extern inline void ioport_unmap(void __iomem *addr) {}
-
#define mmiowb()
/* Conversion between virtual and physical mappings. */
@@ -189,12 +186,22 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
* we never run, uses them unconditionally.
*/
-static inline int ioport_panic(void)
+static inline long ioport_panic(void)
{
panic("inb/outb and friends do not exist on tile");
return 0;
}
+static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+ return (void __iomem *) ioport_panic();
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+ ioport_panic();
+}
+
static inline u8 inb(unsigned long addr)
{
return ioport_panic();
diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h
deleted file mode 100644
index e853b0e2793b..000000000000
--- a/arch/tile/include/asm/pci-bridge.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, version 2.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for
- * more details.
- */
-
-#ifndef _ASM_TILE_PCI_BRIDGE_H
-#define _ASM_TILE_PCI_BRIDGE_H
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-
-struct device_node;
-struct pci_controller;
-
-/*
- * pci_io_base returns the memory address at which you can access
- * the I/O space for PCI bus number `bus' (or NULL on error).
- */
-extern void __iomem *pci_bus_io_base(unsigned int bus);
-extern unsigned long pci_bus_io_base_phys(unsigned int bus);
-extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
-
-/* Allocate a new PCI host bridge structure */
-extern struct pci_controller *pcibios_alloc_controller(void);
-
-/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, unsigned long start,
- unsigned long end, int flags, char *name);
-
-/* Get the PCI host controller for a bus */
-extern struct pci_controller *pci_bus_to_hose(int bus);
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
- int index; /* PCI domain number */
- struct pci_bus *root_bus;
-
- int first_busno;
- int last_busno;
-
- int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
- int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
-
- struct pci_ops *ops;
-
- int irq_base; /* Base IRQ from the Hypervisor */
- int plx_gen1; /* flag for PLX Gen 1 configuration */
-
- /* Address ranges that are routed to this controller/bridge. */
- struct resource mem_resources[3];
-};
-
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
-{
- return bus->sysdata;
-}
-
-extern void setup_indirect_pci_nomap(struct pci_controller *hose,
- void __iomem *cfg_addr, void __iomem *cfg_data);
-extern void setup_indirect_pci(struct pci_controller *hose,
- u32 cfg_addr, u32 cfg_data);
-extern void setup_grackle(struct pci_controller *hose);
-
-extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
-
-/*
- * The following code swizzles for exactly one bridge. The routine
- * common_swizzle below handles multiple bridges. But there are a
- * some boards that don't follow the PCI spec's suggestion so we
- * break this piece out separately.
- */
-static inline unsigned char bridge_swizzle(unsigned char pin,
- unsigned char idsel)
-{
- return (((pin-1) + idsel) % 4) + 1;
-}
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those PPC systems that do not already have PCI
- * interrupts properly routed.
- */
-/* FIXME - double check this */
-#define PCI_IRQ_TABLE_LOOKUP ({ \
- long _ctl_ = -1; \
- if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
- _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
- _ctl_; \
-})
-
-/*
- * Scan the buses below a given PCI host bridge and assign suitable
- * resources to all devices found.
- */
-extern int pciauto_bus_scan(struct pci_controller *, int);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
- return (unsigned long)-1;
-}
-#endif
-
-#endif /* _ASM_TILE_PCI_BRIDGE_H */
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index b0c15da2d5d5..c3fc458a0d32 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -15,7 +15,29 @@
#ifndef _ASM_TILE_PCI_H
#define _ASM_TILE_PCI_H
-#include <asm/pci-bridge.h>
+#include <linux/pci.h>
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+ int index; /* PCI domain number */
+ struct pci_bus *root_bus;
+
+ int first_busno;
+ int last_busno;
+
+ int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
+ int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
+
+ struct pci_ops *ops;
+
+ int irq_base; /* Base IRQ from the Hypervisor */
+ int plx_gen1; /* flag for PLX Gen 1 configuration */
+
+ /* Address ranges that are routed to this controller/bridge. */
+ struct resource mem_resources[3];
+};
/*
* The hypervisor maps the entirety of CPA-space as bus addresses, so
@@ -24,56 +46,12 @@
*/
#define PCI_DMA_BUS_IS_PHYS 1
-struct pci_controller *pci_bus_to_hose(int bus);
-unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
int __init tile_pci_init(void);
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-void __devinit pcibios_fixup_bus(struct pci_bus *bus);
-int __devinit _tile_cfg_read(struct pci_controller *hose,
- int bus,
- int slot,
- int function,
- int offset,
- int size,
- u32 *val);
-int __devinit _tile_cfg_write(struct pci_controller *hose,
- int bus,
- int slot,
- int function,
- int offset,
- int size,
- u32 val);
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
-/*
- * These are used to to config reads and writes in the early stages of
- * setup before the driver infrastructure has been set up enough to be
- * able to do config reads and writes.
- */
-#define early_cfg_read(where, size, value) \
- _tile_cfg_read(controller, \
- current_bus, \
- pci_slot, \
- pci_fn, \
- where, \
- size, \
- value)
-
-#define early_cfg_write(where, size, value) \
- _tile_cfg_write(controller, \
- current_bus, \
- pci_slot, \
- pci_fn, \
- where, \
- size, \
- value)
-
-
-
-#define PCICFG_BYTE 1
-#define PCICFG_WORD 2
-#define PCICFG_DWORD 4
+void __devinit pcibios_fixup_bus(struct pci_bus *bus);
#define TILE_NUM_PCIE 2
@@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus)
}
/*
- * I/O space is currently not supported.
+ * pcibios_assign_all_busses() tells whether or not the bus numbers
+ * should be reassigned, in case the BIOS didn't do it correctly, or
+ * in case we don't have a BIOS and we want to let Linux do it.
*/
+static inline int pcibios_assign_all_busses(void)
+{
+ return 1;
+}
-#define TILE_PCIE_LOWER_IO 0x0
-#define TILE_PCIE_UPPER_IO 0x10000
-#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF
-
-#define _PAGE_NO_CACHE 0
-#define _PAGE_GUARDED 0
-
-
-#define pcibios_assign_all_busses() pci_assign_all_buses
-extern int pci_assign_all_buses;
-
+/*
+ * No special bus mastering setup handling.
+ */
static inline void pcibios_set_master(struct pci_dev *dev)
{
- /* No special bus mastering setup handling */
}
#define PCIBIOS_MIN_MEM 0
-#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO
+#define PCIBIOS_MIN_IO 0
/*
* This flag tells if the platform is TILEmpower that needs
* special configuration for the PLX switch chip.
*/
-extern int blade_pci;
+extern int tile_plx_gen1;
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
@@ -122,7 +100,4 @@ extern int blade_pci;
/* generic pci stuff */
#include <asm-generic/pci.h>
-/* Use any cpu for PCI. */
-#define cpumask_of_pcibus(bus) cpu_online_mask
-
#endif /* _ASM_TILE_PCI_H */
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index 1747ff3946b2..a9e7c8760334 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -292,8 +292,18 @@ extern int kstack_hash;
/* Are we using huge pages in the TLB for kernel data? */
extern int kdata_huge;
+/* Support standard Linux prefetching. */
+#define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch(x)
#define PREFETCH_STRIDE CHIP_L2_LINE_SIZE()
+/* Bring a value into the L1D, faulting the TLB if necessary. */
+#ifdef __tilegx__
+#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x))
+#else
+#define prefetch_L1(x) __insn_prefetch_L1((void *)(x))
+#endif
+
#else /* __ASSEMBLY__ */
/* Do some slow action (e.g. read a slow SPR). */
diff --git a/arch/tile/include/hv/drv_xgbe_impl.h b/arch/tile/include/hv/drv_xgbe_impl.h
new file mode 100644
index 000000000000..3a73b2b44913
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_impl.h
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file drivers/xgbe/impl.h
+ * Implementation details for the NetIO library.
+ */
+
+#ifndef __DRV_XGBE_IMPL_H__
+#define __DRV_XGBE_IMPL_H__
+
+#include <hv/netio_errors.h>
+#include <hv/netio_intf.h>
+#include <hv/drv_xgbe_intf.h>
+
+
+/** How many groups we have (log2). */
+#define LOG2_NUM_GROUPS (12)
+/** How many groups we have. */
+#define NUM_GROUPS (1 << LOG2_NUM_GROUPS)
+
+/** Number of output requests we'll buffer per tile. */
+#define EPP_REQS_PER_TILE (32)
+
+/** Words used in an eDMA command without checksum acceleration. */
+#define EDMA_WDS_NO_CSUM 8
+/** Words used in an eDMA command with checksum acceleration. */
+#define EDMA_WDS_CSUM 10
+/** Total available words in the eDMA command FIFO. */
+#define EDMA_WDS_TOTAL 128
+
+
+/*
+ * FIXME: These definitions are internal and should have underscores!
+ * NOTE: The actual numeric values here are intentional and allow us to
+ * optimize the concept "if small ... else if large ... else ...", by
+ * checking for the low bit being set, and then for non-zero.
+ * These are used as array indices, so they must have the values (0, 1, 2)
+ * in some order.
+ */
+#define SIZE_SMALL (1) /**< Small packet queue. */
+#define SIZE_LARGE (2) /**< Large packet queue. */
+#define SIZE_JUMBO (0) /**< Jumbo packet queue. */
+
+/** The number of "SIZE_xxx" values. */
+#define NETIO_NUM_SIZES 3
+
+
+/*
+ * Default numbers of packets for IPP drivers. These values are chosen
+ * such that CIPP1 will not overflow its L2 cache.
+ */
+
+/** The default number of small packets. */
+#define NETIO_DEFAULT_SMALL_PACKETS 2750
+/** The default number of large packets. */
+#define NETIO_DEFAULT_LARGE_PACKETS 2500
+/** The default number of jumbo packets. */
+#define NETIO_DEFAULT_JUMBO_PACKETS 250
+
+
+/** Log2 of the size of a memory arena. */
+#define NETIO_ARENA_SHIFT 24 /* 16 MB */
+/** Size of a memory arena. */
+#define NETIO_ARENA_SIZE (1 << NETIO_ARENA_SHIFT)
+
+
+/** A queue of packets.
+ *
+ * This structure partially defines a queue of packets waiting to be
+ * processed. The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler. The other part of the queue state, the read offset, is
+ * kept in user space, not in hypervisor space, so it is in a separate data
+ * structure.
+ *
+ * The read offset (__packet_receive_read in the user part of the queue
+ * structure) points to the next packet to be read. When the read offset is
+ * equal to the write offset, the queue is empty; therefore the queue must
+ * contain one more slot than the required maximum queue size.
+ *
+ * Here's an example of all 3 state variables and what they mean. All
+ * pointers move left to right.
+ *
+ * @code
+ * I I V V V V I I I I
+ * 0 1 2 3 4 5 6 7 8 9 10
+ * ^ ^ ^ ^
+ * | | |
+ * | | __last_packet_plus_one
+ * | __buffer_write
+ * __packet_receive_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 packets (_last_packet_plus_one
+ * = 10). The read pointer is at 2, and the write pointer is at 6; thus,
+ * there are valid, unread packets in slots 2, 3, 4, and 5. The remaining
+ * slots are invalid (do not contain a packet).
+ */
+typedef struct {
+ /** Byte offset of the next notify packet to be written: zero for the first
+ * packet on the queue, sizeof (netio_pkt_t) for the second packet on the
+ * queue, etc. */
+ volatile uint32_t __packet_write;
+
+ /** Offset of the packet after the last valid packet (i.e., when any
+ * pointer is incremented to this value, it wraps back to zero). */
+ uint32_t __last_packet_plus_one;
+}
+__netio_packet_queue_t;
+
+
+/** A queue of buffers.
+ *
+ * This structure partially defines a queue of empty buffers which have been
+ * obtained via requests to the IPP. (The elements of the queue are packet
+ * handles, which are transformed into a full netio_pkt_t when the buffer is
+ * retrieved.) The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler. The other parts of the queue state, the read offset and
+ * requested write offset, are kept in user space, not in hypervisor space, so
+ * they are in a separate data structure.
+ *
+ * The read offset (__buffer_read in the user part of the queue structure)
+ * points to the next buffer to be read. When the read offset is equal to the
+ * write offset, the queue is empty; therefore the queue must contain one more
+ * slot than the required maximum queue size.
+ *
+ * The requested write offset (__buffer_requested_write in the user part of
+ * the queue structure) points to the slot which will hold the next buffer we
+ * request from the IPP, once we get around to sending such a request. When
+ * the requested write offset is equal to the write offset, no requests for
+ * new buffers are outstanding; when the requested write offset is one greater
+ * than the read offset, no more requests may be sent.
+ *
+ * Note that, unlike the packet_queue, the buffer_queue places incoming
+ * buffers at decreasing addresses. This makes the check for "is it time to
+ * wrap the buffer pointer" cheaper in the assembly code which receives new
+ * buffers, and means that the value which defines the queue size,
+ * __last_buffer, is different than in the packet queue. Also, the offset
+ * used in the packet_queue is already scaled by the size of a packet; here we
+ * use unscaled slot indices for the offsets. (These differences are
+ * historical, and in the future it's possible that the packet_queue will look
+ * more like this queue.)
+ *
+ * @code
+ * Here's an example of all 4 state variables and what they mean. Remember:
+ * all pointers move right to left.
+ *
+ * V V V I I R R V V V
+ * 0 1 2 3 4 5 6 7 8 9
+ * ^ ^ ^ ^
+ * | | | |
+ * | | | __last_buffer
+ * | | __buffer_write
+ * | __buffer_requested_write
+ * __buffer_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 buffers (_last_buffer = 9).
+ * The read pointer is at 2, and the write pointer is at 6; thus, there are
+ * valid, unread buffers in slots 2, 1, 0, 9, 8, and 7. The requested write
+ * pointer is at 4; thus, requests have been made to the IPP for buffers which
+ * will be placed in slots 6 and 5 when they arrive. Finally, the remaining
+ * slots are invalid (do not contain a buffer).
+ */
+typedef struct
+{
+ /** Ordinal number of the next buffer to be written: 0 for the first slot in
+ * the queue, 1 for the second slot in the queue, etc. */
+ volatile uint32_t __buffer_write;
+
+ /** Ordinal number of the last buffer (i.e., when any pointer is decremented
+ * below zero, it is reloaded with this value). */
+ uint32_t __last_buffer;
+}
+__netio_buffer_queue_t;
+
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+typedef struct __netio_queue_impl_t
+{
+ /** The queue of packets waiting to be received. */
+ __netio_packet_queue_t __packet_receive_queue;
+ /** The intr bit mask that IDs this device. */
+ unsigned int __intr_id;
+ /** Offset to queues of empty buffers, one per size. */
+ uint32_t __buffer_queue[NETIO_NUM_SIZES];
+ /** The address of the first EPP tile, or -1 if no EPP. */
+ /* ISSUE: Actually this is always "0" or "~0". */
+ uint32_t __epp_location;
+ /** The queue ID that this queue represents. */
+ unsigned int __queue_id;
+ /** Number of acknowledgements received. */
+ volatile uint32_t __acks_received;
+ /** Last completion number received for packet_sendv. */
+ volatile uint32_t __last_completion_rcv;
+ /** Number of packets allowed to be outstanding. */
+ uint32_t __max_outstanding;
+ /** First VA available for packets. */
+ void* __va_0;
+ /** First VA in second range available for packets. */
+ void* __va_1;
+ /** Padding to align the "__packets" field to the size of a netio_pkt_t. */
+ uint32_t __padding[3];
+ /** The packets themselves. */
+ netio_pkt_t __packets[0];
+}
+netio_queue_impl_t;
+
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+typedef struct __netio_queue_user_impl_t
+{
+ /** The next incoming packet to be read. */
+ uint32_t __packet_receive_read;
+ /** The next empty buffers to be read, one index per size. */
+ uint8_t __buffer_read[NETIO_NUM_SIZES];
+ /** Where the empty buffer we next request from the IPP will go, one index
+ * per size. */
+ uint8_t __buffer_requested_write[NETIO_NUM_SIZES];
+ /** PCIe interface flag. */
+ uint8_t __pcie;
+ /** Number of packets left to be received before we send a credit update. */
+ uint32_t __receive_credit_remaining;
+ /** Value placed in __receive_credit_remaining when it reaches zero. */
+ uint32_t __receive_credit_interval;
+ /** First fast I/O routine index. */
+ uint32_t __fastio_index;
+ /** Number of acknowledgements expected. */
+ uint32_t __acks_outstanding;
+ /** Last completion number requested. */
+ uint32_t __last_completion_req;
+ /** File descriptor for driver. */
+ int __fd;
+}
+netio_queue_user_impl_t;
+
+
+#define NETIO_GROUP_CHUNK_SIZE 64 /**< Max # groups in one IPP request */
+#define NETIO_BUCKET_CHUNK_SIZE 64 /**< Max # buckets in one IPP request */
+
+
+/** Internal structure used to convey packet send information to the
+ * hypervisor. FIXME: Actually, it's not used for that anymore, but
+ * netio_packet_send() still uses it internally.
+ */
+typedef struct
+{
+ uint16_t flags; /**< Packet flags (__NETIO_SEND_FLG_xxx) */
+ uint16_t transfer_size; /**< Size of packet */
+ uint32_t va; /**< VA of start of packet */
+ __netio_pkt_handle_t handle; /**< Packet handle */
+ uint32_t csum0; /**< First checksum word */
+ uint32_t csum1; /**< Second checksum word */
+}
+__netio_send_cmd_t;
+
+
+/** Flags used in two contexts:
+ * - As the "flags" member in the __netio_send_cmd_t, above; used only
+ * for netio_pkt_send_{prepare,commit}.
+ * - As part of the flags passed to the various send packet fast I/O calls.
+ */
+
+/** Need acknowledgement on this packet. Note that some code in the
+ * normal send_pkt fast I/O handler assumes that this is equal to 1. */
+#define __NETIO_SEND_FLG_ACK 0x1
+
+/** Do checksum on this packet. (Only used with the __netio_send_cmd_t;
+ * normal packet sends use a special fast I/O index to denote checksumming,
+ * and multi-segment sends test the checksum descriptor.) */
+#define __NETIO_SEND_FLG_CSUM 0x2
+
+/** Get a completion on this packet. Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_COMPLETION 0x4
+
+/** Position of the number-of-extra-segments value in the flags word.
+ Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_XSEG_SHIFT 3
+
+/** Width of the number-of-extra-segments value in the flags word. */
+#define __NETIO_SEND_FLG_XSEG_WIDTH 2
+
+#endif /* __DRV_XGBE_IMPL_H__ */
diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h
new file mode 100644
index 000000000000..146e47d5334b
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_intf.h
@@ -0,0 +1,615 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file drv_xgbe_intf.h
+ * Interface to the hypervisor XGBE driver.
+ */
+
+#ifndef __DRV_XGBE_INTF_H__
+#define __DRV_XGBE_INTF_H__
+
+/**
+ * An object for forwarding VAs and PAs to the hypervisor.
+ * @ingroup types
+ *
+ * This allows the supervisor to specify a number of areas of memory to
+ * store packet buffers.
+ */
+typedef struct
+{
+ /** The physical address of the memory. */
+ HV_PhysAddr pa;
+ /** Page table entry for the memory. This is only used to derive the
+ * memory's caching mode; the PA bits are ignored. */
+ HV_PTE pte;
+ /** The virtual address of the memory. */
+ HV_VirtAddr va;
+ /** Size (in bytes) of the memory area. */
+ int size;
+
+}
+netio_ipp_address_t;
+
+/** The various pread/pwrite offsets into the hypervisor-level driver.
+ * @ingroup types
+ */
+typedef enum
+{
+ /** Inform the Linux driver of the address of the NetIO arena memory.
+ * This offset is actually only used to convey information from netio
+ * to the Linux driver; it never makes it from there to the hypervisor.
+ * Write-only; takes a uint32_t specifying the VA address. */
+ NETIO_FIXED_ADDR = 0x5000000000000000ULL,
+
+ /** Inform the Linux driver of the size of the NetIO arena memory.
+ * This offset is actually only used to convey information from netio
+ * to the Linux driver; it never makes it from there to the hypervisor.
+ * Write-only; takes a uint32_t specifying the VA size. */
+ NETIO_FIXED_SIZE = 0x5100000000000000ULL,
+
+ /** Register current tile with IPP. Write then read: write, takes a
+ * netio_input_config_t, read returns a pointer to a netio_queue_impl_t. */
+ NETIO_IPP_INPUT_REGISTER_OFF = 0x6000000000000000ULL,
+
+ /** Unregister current tile from IPP. Write-only, takes a dummy argument. */
+ NETIO_IPP_INPUT_UNREGISTER_OFF = 0x6100000000000000ULL,
+
+ /** Start packets flowing. Write-only, takes a dummy argument. */
+ NETIO_IPP_INPUT_INIT_OFF = 0x6200000000000000ULL,
+
+ /** Stop packets flowing. Write-only, takes a dummy argument. */
+ NETIO_IPP_INPUT_UNINIT_OFF = 0x6300000000000000ULL,
+
+ /** Configure group (typically we group on VLAN). Write-only: takes an
+ * array of netio_group_t's, low 24 bits of the offset is the base group
+ * number times the size of a netio_group_t. */
+ NETIO_IPP_INPUT_GROUP_CFG_OFF = 0x6400000000000000ULL,
+
+ /** Configure bucket. Write-only: takes an array of netio_bucket_t's, low
+ * 24 bits of the offset is the base bucket number times the size of a
+ * netio_bucket_t. */
+ NETIO_IPP_INPUT_BUCKET_CFG_OFF = 0x6500000000000000ULL,
+
+ /** Get/set a parameter. Read or write: read or write data is the parameter
+ * value, low 32 bits of the offset is a __netio_getset_offset_t. */
+ NETIO_IPP_PARAM_OFF = 0x6600000000000000ULL,
+
+ /** Get fast I/O index. Read-only; returns a 4-byte base index value. */
+ NETIO_IPP_GET_FASTIO_OFF = 0x6700000000000000ULL,
+
+ /** Configure hijack IP address. Packets with this IPv4 dest address
+ * go to bucket NETIO_NUM_BUCKETS - 1. Write-only: takes an IP address
+ * in some standard form. FIXME: Define the form! */
+ NETIO_IPP_INPUT_HIJACK_CFG_OFF = 0x6800000000000000ULL,
+
+ /**
+ * Offsets beyond this point are reserved for the supervisor (although that
+ * enforcement must be done by the supervisor driver itself).
+ */
+ NETIO_IPP_USER_MAX_OFF = 0x6FFFFFFFFFFFFFFFULL,
+
+ /** Register I/O memory. Write-only, takes a netio_ipp_address_t. */
+ NETIO_IPP_IOMEM_REGISTER_OFF = 0x7000000000000000ULL,
+
+ /** Unregister I/O memory. Write-only, takes a netio_ipp_address_t. */
+ NETIO_IPP_IOMEM_UNREGISTER_OFF = 0x7100000000000000ULL,
+
+ /* Offsets greater than 0x7FFFFFFF can't be used directly from Linux
+ * userspace code due to limitations in the pread/pwrite syscalls. */
+
+ /** Drain LIPP buffers. */
+ NETIO_IPP_DRAIN_OFF = 0xFA00000000000000ULL,
+
+ /** Supply a netio_ipp_address_t to be used as shared memory for the
+ * LEPP command queue. */
+ NETIO_EPP_SHM_OFF = 0xFB00000000000000ULL,
+
+ /* 0xFC... is currently unused. */
+
+ /** Stop IPP/EPP tiles. Write-only, takes a dummy argument. */
+ NETIO_IPP_STOP_SHIM_OFF = 0xFD00000000000000ULL,
+
+ /** Start IPP/EPP tiles. Write-only, takes a dummy argument. */
+ NETIO_IPP_START_SHIM_OFF = 0xFE00000000000000ULL,
+
+ /** Supply packet arena. Write-only, takes an array of
+ * netio_ipp_address_t values. */
+ NETIO_IPP_ADDRESS_OFF = 0xFF00000000000000ULL,
+} netio_hv_offset_t;
+
+/** Extract the base offset from an offset */
+#define NETIO_BASE_OFFSET(off) ((off) & 0xFF00000000000000ULL)
+/** Extract the local offset from an offset */
+#define NETIO_LOCAL_OFFSET(off) ((off) & 0x00FFFFFFFFFFFFFFULL)
+
+
+/**
+ * Get/set offset.
+ */
+typedef union
+{
+ struct
+ {
+ uint64_t addr:48; /**< Class-specific address */
+ unsigned int class:8; /**< Class (e.g., NETIO_PARAM) */
+ unsigned int opcode:8; /**< High 8 bits of NETIO_IPP_PARAM_OFF */
+ }
+ bits; /**< Bitfields */
+ uint64_t word; /**< Aggregated value to use as the offset */
+}
+__netio_getset_offset_t;
+
+/**
+ * Fast I/O index offsets (must be contiguous).
+ */
+typedef enum
+{
+ NETIO_FASTIO_ALLOCATE = 0, /**< Get empty packet buffer */
+ NETIO_FASTIO_FREE_BUFFER = 1, /**< Give buffer back to IPP */
+ NETIO_FASTIO_RETURN_CREDITS = 2, /**< Give credits to IPP */
+ NETIO_FASTIO_SEND_PKT_NOCK = 3, /**< Send a packet, no checksum */
+ NETIO_FASTIO_SEND_PKT_CK = 4, /**< Send a packet, with checksum */
+ NETIO_FASTIO_SEND_PKT_VEC = 5, /**< Send a vector of packets */
+ NETIO_FASTIO_SENDV_PKT = 6, /**< Sendv one packet */
+ NETIO_FASTIO_NUM_INDEX = 7, /**< Total number of fast I/O indices */
+} netio_fastio_index_t;
+
+/** 3-word return type for Fast I/O call. */
+typedef struct
+{
+ int err; /**< Error code. */
+ uint32_t val0; /**< Value. Meaning depends upon the specific call. */
+ uint32_t val1; /**< Value. Meaning depends upon the specific call. */
+} netio_fastio_rv3_t;
+
+/** 0-argument fast I/O call */
+int __netio_fastio0(uint32_t fastio_index);
+/** 1-argument fast I/O call */
+int __netio_fastio1(uint32_t fastio_index, uint32_t arg0);
+/** 3-argument fast I/O call, 2-word return value */
+netio_fastio_rv3_t __netio_fastio3_rv3(uint32_t fastio_index, uint32_t arg0,
+ uint32_t arg1, uint32_t arg2);
+/** 4-argument fast I/O call */
+int __netio_fastio4(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3);
+/** 6-argument fast I/O call */
+int __netio_fastio6(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5);
+/** 9-argument fast I/O call */
+int __netio_fastio9(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5,
+ uint32_t arg6, uint32_t arg7, uint32_t arg8);
+
+/** Allocate an empty packet.
+ * @param fastio_index Fast I/O index.
+ * @param size Size of the packet to allocate.
+ */
+#define __netio_fastio_allocate(fastio_index, size) \
+ __netio_fastio1((fastio_index) + NETIO_FASTIO_ALLOCATE, size)
+
+/** Free a buffer.
+ * @param fastio_index Fast I/O index.
+ * @param handle Handle for the packet to free.
+ */
+#define __netio_fastio_free_buffer(fastio_index, handle) \
+ __netio_fastio1((fastio_index) + NETIO_FASTIO_FREE_BUFFER, handle)
+
+/** Increment our receive credits.
+ * @param fastio_index Fast I/O index.
+ * @param credits Number of credits to add.
+ */
+#define __netio_fastio_return_credits(fastio_index, credits) \
+ __netio_fastio1((fastio_index) + NETIO_FASTIO_RETURN_CREDITS, credits)
+
+/** Send packet, no checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ */
+#define __netio_fastio_send_pkt_nock(fastio_index, ackflag, size, va, handle) \
+ __netio_fastio4((fastio_index) + NETIO_FASTIO_SEND_PKT_NOCK, ackflag, \
+ size, va, handle)
+
+/** Send packet, calculate checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ * @param csum0 Shim checksum header.
+ * @param csum1 Checksum seed.
+ */
+#define __netio_fastio_send_pkt_ck(fastio_index, ackflag, size, va, handle, \
+ csum0, csum1) \
+ __netio_fastio6((fastio_index) + NETIO_FASTIO_SEND_PKT_CK, ackflag, \
+ size, va, handle, csum0, csum1)
+
+
+/** Format for the "csum0" argument to the __netio_fastio_send routines
+ * and LEPP. Note that this is currently exactly identical to the
+ * ShimProtocolOffloadHeader.
+ */
+typedef union
+{
+ struct
+ {
+ unsigned int start_byte:7; /**< The first byte to be checksummed */
+ unsigned int count:14; /**< Number of bytes to be checksummed. */
+ unsigned int destination_byte:7; /**< The byte to write the checksum to. */
+ unsigned int reserved:4; /**< Reserved. */
+ } bits; /**< Decomposed method of access. */
+ unsigned int word; /**< To send out the IDN. */
+} __netio_checksum_header_t;
+
+
+/** Sendv packet with 1 or 2 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ * 1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment, if 2 segments.
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ * segment, if 2 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_1_2(fastio_index, flags, confno, csum0, \
+ va_F, va_L, len_F_L) \
+ __netio_fastio6((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+ csum0, va_F, va_L, len_F_L)
+
+/** Send packet on PCIe interface.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; Hard wired 0, not needed for PCIe.
+ * @param va_F Virtual address of the packet buffer.
+ * @param va_L Virtual address of last segment, if 2 segments. Hard wired 0.
+ * @param len_F_L Length of the packet buffer in low 16 bits.
+ */
+#define __netio_fastio_send_pcie_pkt(fastio_index, flags, confno, csum0, \
+ va_F, va_L, len_F_L) \
+ __netio_fastio6((fastio_index) + PCIE_FASTIO_SENDV_PKT, flags, confno, \
+ csum0, va_F, va_L, len_F_L)
+
+/** Sendv packet with 3 or 4 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ * 1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment (third segment if 3 segments,
+ * fourth segment if 4 segments).
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ * segment in high 16 bits.
+ * @param va_M0 Virtual address of "middle 0" segment; this segment is sent
+ * second when there are three segments, and third if there are four.
+ * @param va_M1 Virtual address of "middle 1" segment; this segment is sent
+ * second when there are four segments.
+ * @param len_M0_M1 Length of middle 0 segment in low 16 bits; length of middle
+ * 1 segment, if 4 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_3_4(fastio_index, flags, confno, csum0, va_F, \
+ va_L, len_F_L, va_M0, va_M1, len_M0_M1) \
+ __netio_fastio9((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+ csum0, va_F, va_L, len_F_L, va_M0, va_M1, len_M0_M1)
+
+/** Send vector of packets.
+ * @param fastio_index Fast I/O index.
+ * @param seqno Number of packets transmitted so far on this interface;
+ * used to decide which packets should be acknowledged.
+ * @param nentries Number of entries in vector.
+ * @param va Virtual address of start of vector entry array.
+ * @return 3-word netio_fastio_rv3_t structure. The structure's err member
+ * is an error code, or zero if no error. The val0 member is the
+ * updated value of seqno; it has been incremented by 1 for each
+ * packet sent. That increment may be less than nentries if an
+ * error occured, or if some of the entries in the vector contain
+ * handles equal to NETIO_PKT_HANDLE_NONE. The val1 member is the
+ * updated value of nentries; it has been decremented by 1 for each
+ * vector entry processed. Again, that decrement may be less than
+ * nentries (leaving the returned value positive) if an error
+ * occurred.
+ */
+#define __netio_fastio_send_pkt_vec(fastio_index, seqno, nentries, va) \
+ __netio_fastio3_rv3((fastio_index) + NETIO_FASTIO_SEND_PKT_VEC, seqno, \
+ nentries, va)
+
+
+/** An egress DMA command for LEPP. */
+typedef struct
+{
+ /** Is this a TSO transfer?
+ *
+ * NOTE: This field is always 0, to distinguish it from
+ * lepp_tso_cmd_t. It must come first!
+ */
+ uint8_t tso : 1;
+
+ /** Unused padding bits. */
+ uint8_t _unused : 3;
+
+ /** Should this packet be sent directly from caches instead of DRAM,
+ * using hash-for-home to locate the packet data?
+ */
+ uint8_t hash_for_home : 1;
+
+ /** Should we compute a checksum? */
+ uint8_t compute_checksum : 1;
+
+ /** Is this the final buffer for this packet?
+ *
+ * A single packet can be split over several input buffers (a "gather"
+ * operation). This flag indicates that this is the last buffer
+ * in a packet.
+ */
+ uint8_t end_of_packet : 1;
+
+ /** Should LEPP advance 'comp_busy' when this DMA is fully finished? */
+ uint8_t send_completion : 1;
+
+ /** High bits of Client Physical Address of the start of the buffer
+ * to be egressed.
+ *
+ * NOTE: Only 6 bits are actually needed here, as CPAs are
+ * currently 38 bits. So two bits could be scavenged from this.
+ */
+ uint8_t cpa_hi;
+
+ /** The number of bytes to be egressed. */
+ uint16_t length;
+
+ /** Low 32 bits of Client Physical Address of the start of the buffer
+ * to be egressed.
+ */
+ uint32_t cpa_lo;
+
+ /** Checksum information (only used if 'compute_checksum'). */
+ __netio_checksum_header_t checksum_data;
+
+} lepp_cmd_t;
+
+
+/** A chunk of physical memory for a TSO egress. */
+typedef struct
+{
+ /** The low bits of the CPA. */
+ uint32_t cpa_lo;
+ /** The high bits of the CPA. */
+ uint16_t cpa_hi : 15;
+ /** Should this packet be sent directly from caches instead of DRAM,
+ * using hash-for-home to locate the packet data?
+ */
+ uint16_t hash_for_home : 1;
+ /** The length in bytes. */
+ uint16_t length;
+} lepp_frag_t;
+
+
+/** An LEPP command that handles TSO. */
+typedef struct
+{
+ /** Is this a TSO transfer?
+ *
+ * NOTE: This field is always 1, to distinguish it from
+ * lepp_cmd_t. It must come first!
+ */
+ uint8_t tso : 1;
+
+ /** Unused padding bits. */
+ uint8_t _unused : 7;
+
+ /** Size of the header[] array in bytes. It must be in the range
+ * [40, 127], which are the smallest header for a TCP packet over
+ * Ethernet and the maximum possible prepend size supported by
+ * hardware, respectively. Note that the array storage must be
+ * padded out to a multiple of four bytes so that the following
+ * LEPP command is aligned properly.
+ */
+ uint8_t header_size;
+
+ /** Byte offset of the IP header in header[]. */
+ uint8_t ip_offset;
+
+ /** Byte offset of the TCP header in header[]. */
+ uint8_t tcp_offset;
+
+ /** The number of bytes to use for the payload of each packet,
+ * except of course the last one, which may not have enough bytes.
+ * This means that each Ethernet packet except the last will have a
+ * size of header_size + payload_size.
+ */
+ uint16_t payload_size;
+
+ /** The length of the 'frags' array that follows this struct. */
+ uint16_t num_frags;
+
+ /** The actual frags. */
+ lepp_frag_t frags[0 /* Variable-sized; num_frags entries. */];
+
+ /*
+ * The packet header template logically follows frags[],
+ * but you can't declare that in C.
+ *
+ * uint32_t header[header_size_in_words_rounded_up];
+ */
+
+} lepp_tso_cmd_t;
+
+
+/** An LEPP completion ring entry. */
+typedef void* lepp_comp_t;
+
+
+/** Maximum number of frags for one TSO command. This is adapted from
+ * linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for
+ * our page size of exactly 65536. We add one for a "body" fragment.
+ */
+#define LEPP_MAX_FRAGS (65536 / HV_PAGE_SIZE_SMALL + 2 + 1)
+
+/** Total number of bytes needed for an lepp_tso_cmd_t. */
+#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \
+ (sizeof(lepp_tso_cmd_t) + \
+ (num_frags) * sizeof(lepp_frag_t) + \
+ (((header_size) + 3) & -4))
+
+/** The size of the lepp "cmd" queue. */
+#define LEPP_CMD_QUEUE_BYTES \
+ (((CHIP_L2_CACHE_SIZE() - 2 * CHIP_L2_LINE_SIZE()) / \
+ (sizeof(lepp_cmd_t) + sizeof(lepp_comp_t))) * sizeof(lepp_cmd_t))
+
+/** The largest possible command that can go in lepp_queue_t::cmds[]. */
+#define LEPP_MAX_CMD_SIZE LEPP_TSO_CMD_SIZE(LEPP_MAX_FRAGS, 128)
+
+/** The largest possible value of lepp_queue_t::cmd_{head, tail} (inclusive).
+ */
+#define LEPP_CMD_LIMIT \
+ (LEPP_CMD_QUEUE_BYTES - LEPP_MAX_CMD_SIZE)
+
+/** The maximum number of completions in an LEPP queue. */
+#define LEPP_COMP_QUEUE_SIZE \
+ ((LEPP_CMD_LIMIT + sizeof(lepp_cmd_t) - 1) / sizeof(lepp_cmd_t))
+
+/** Increment an index modulo the queue size. */
+#define LEPP_QINC(var) \
+ (var = __insn_mnz(var - (LEPP_COMP_QUEUE_SIZE - 1), var + 1))
+
+/** A queue used to convey egress commands from the client to LEPP. */
+typedef struct
+{
+ /** Index of first completion not yet processed by user code.
+ * If this is equal to comp_busy, there are no such completions.
+ *
+ * NOTE: This is only read/written by the user.
+ */
+ unsigned int comp_head;
+
+ /** Index of first completion record not yet completed.
+ * If this is equal to comp_tail, there are no such completions.
+ * This index gets advanced (modulo LEPP_QUEUE_SIZE) whenever
+ * a command with the 'completion' bit set is finished.
+ *
+ * NOTE: This is only written by LEPP, only read by the user.
+ */
+ volatile unsigned int comp_busy;
+
+ /** Index of the first empty slot in the completion ring.
+ * Entries from this up to but not including comp_head (in ring order)
+ * can be filled in with completion data.
+ *
+ * NOTE: This is only read/written by the user.
+ */
+ unsigned int comp_tail;
+
+ /** Byte index of first command enqueued for LEPP but not yet processed.
+ *
+ * This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+ *
+ * NOTE: LEPP advances this counter as soon as it no longer needs
+ * the cmds[] storage for this entry, but the transfer is not actually
+ * complete (i.e. the buffer pointed to by the command is no longer
+ * needed) until comp_busy advances.
+ *
+ * If this is equal to cmd_tail, the ring is empty.
+ *
+ * NOTE: This is only written by LEPP, only read by the user.
+ */
+ volatile unsigned int cmd_head;
+
+ /** Byte index of first empty slot in the command ring. This field can
+ * be incremented up to but not equal to cmd_head (because that would
+ * mean the ring is empty).
+ *
+ * This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+ *
+ * NOTE: This is read/written by the user, only read by LEPP.
+ */
+ volatile unsigned int cmd_tail;
+
+ /** A ring of variable-sized egress DMA commands.
+ *
+ * NOTE: Only written by the user, only read by LEPP.
+ */
+ char cmds[LEPP_CMD_QUEUE_BYTES]
+ __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+
+ /** A ring of user completion data.
+ * NOTE: Only read/written by the user.
+ */
+ lepp_comp_t comps[LEPP_COMP_QUEUE_SIZE]
+ __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+} lepp_queue_t;
+
+
+/** An internal helper function for determining the number of entries
+ * available in a ring buffer, given that there is one sentinel.
+ */
+static inline unsigned int
+_lepp_num_free_slots(unsigned int head, unsigned int tail)
+{
+ /*
+ * One entry is reserved for use as a sentinel, to distinguish
+ * "empty" from "full". So we compute
+ * (head - tail - 1) % LEPP_QUEUE_SIZE, but without using a slow % operation.
+ */
+ return (head - tail - 1) + ((head <= tail) ? LEPP_COMP_QUEUE_SIZE : 0);
+}
+
+
+/** Returns how many new comp entries can be enqueued. */
+static inline unsigned int
+lepp_num_free_comp_slots(const lepp_queue_t* q)
+{
+ return _lepp_num_free_slots(q->comp_head, q->comp_tail);
+}
+
+static inline int
+lepp_qsub(int v1, int v2)
+{
+ int delta = v1 - v2;
+ return delta + ((delta >> 31) & LEPP_COMP_QUEUE_SIZE);
+}
+
+
+/** FIXME: Check this from linux, via a new "pwrite()" call. */
+#define LIPP_VERSION 1
+
+
+/** We use exactly two bytes of alignment padding. */
+#define LIPP_PACKET_PADDING 2
+
+/** The minimum size of a "small" buffer (including the padding). */
+#define LIPP_SMALL_PACKET_SIZE 128
+
+/*
+ * NOTE: The following two values should total to less than around
+ * 13582, to keep the total size used for "lipp_state_t" below 64K.
+ */
+
+/** The maximum number of "small" buffers.
+ * This is enough for 53 network cpus with 128 credits. Note that
+ * if these are exhausted, we will fall back to using large buffers.
+ */
+#define LIPP_SMALL_BUFFERS 6785
+
+/** The maximum number of "large" buffers.
+ * This is enough for 53 network cpus with 128 credits.
+ */
+#define LIPP_LARGE_BUFFERS 6785
+
+#endif /* __DRV_XGBE_INTF_H__ */
diff --git a/arch/tile/include/hv/netio_errors.h b/arch/tile/include/hv/netio_errors.h
new file mode 100644
index 000000000000..e1591bff61b5
--- /dev/null
+++ b/arch/tile/include/hv/netio_errors.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * Error codes returned from NetIO routines.
+ */
+
+#ifndef __NETIO_ERRORS_H__
+#define __NETIO_ERRORS_H__
+
+/**
+ * @addtogroup error
+ *
+ * @brief The error codes returned by NetIO functions.
+ *
+ * NetIO functions return 0 (defined as ::NETIO_NO_ERROR) on success, and
+ * a negative value if an error occurs.
+ *
+ * In cases where a NetIO function failed due to a error reported by
+ * system libraries, the error code will be the negation of the
+ * system errno at the time of failure. The @ref netio_strerror()
+ * function will deliver error strings for both NetIO and system error
+ * codes.
+ *
+ * @{
+ */
+
+/** The set of all NetIO errors. */
+typedef enum
+{
+ /** Operation successfully completed. */
+ NETIO_NO_ERROR = 0,
+
+ /** A packet was successfully retrieved from an input queue. */
+ NETIO_PKT = 0,
+
+ /** Largest NetIO error number. */
+ NETIO_ERR_MAX = -701,
+
+ /** The tile is not registered with the IPP. */
+ NETIO_NOT_REGISTERED = -701,
+
+ /** No packet was available to retrieve from the input queue. */
+ NETIO_NOPKT = -702,
+
+ /** The requested function is not implemented. */
+ NETIO_NOT_IMPLEMENTED = -703,
+
+ /** On a registration operation, the target queue already has the maximum
+ * number of tiles registered for it, and no more may be added. On a
+ * packet send operation, the output queue is full and nothing more can
+ * be queued until some of the queued packets are actually transmitted. */
+ NETIO_QUEUE_FULL = -704,
+
+ /** The calling process or thread is not bound to exactly one CPU. */
+ NETIO_BAD_AFFINITY = -705,
+
+ /** Cannot allocate memory on requested controllers. */
+ NETIO_CANNOT_HOME = -706,
+
+ /** On a registration operation, the IPP specified is not configured
+ * to support the options requested; for instance, the application
+ * wants a specific type of tagged headers which the configured IPP
+ * doesn't support. Or, the supplied configuration information is
+ * not self-consistent, or is out of range; for instance, specifying
+ * both NETIO_RECV and NETIO_NO_RECV, or asking for more than
+ * NETIO_MAX_SEND_BUFFERS to be preallocated. On a VLAN or bucket
+ * configure operation, the number of items, or the base item, was
+ * out of range.
+ */
+ NETIO_BAD_CONFIG = -707,
+
+ /** Too many tiles have registered to transmit packets. */
+ NETIO_TOOMANY_XMIT = -708,
+
+ /** Packet transmission was attempted on a queue which was registered
+ with transmit disabled. */
+ NETIO_UNREG_XMIT = -709,
+
+ /** This tile is already registered with the IPP. */
+ NETIO_ALREADY_REGISTERED = -710,
+
+ /** The Ethernet link is down. The application should try again later. */
+ NETIO_LINK_DOWN = -711,
+
+ /** An invalid memory buffer has been specified. This may be an unmapped
+ * virtual address, or one which does not meet alignment requirements.
+ * For netio_input_register(), this error may be returned when multiple
+ * processes specify different memory regions to be used for NetIO
+ * buffers. That can happen if these processes specify explicit memory
+ * regions with the ::NETIO_FIXED_BUFFER_VA flag, or if tmc_cmem_init()
+ * has not been called by a common ancestor of the processes.
+ */
+ NETIO_FAULT = -712,
+
+ /** Cannot combine user-managed shared memory and cache coherence. */
+ NETIO_BAD_CACHE_CONFIG = -713,
+
+ /** Smallest NetIO error number. */
+ NETIO_ERR_MIN = -713,
+
+#ifndef __DOXYGEN__
+ /** Used internally to mean that no response is needed; never returned to
+ * an application. */
+ NETIO_NO_RESPONSE = 1
+#endif
+} netio_error_t;
+
+/** @} */
+
+#endif /* __NETIO_ERRORS_H__ */
diff --git a/arch/tile/include/hv/netio_intf.h b/arch/tile/include/hv/netio_intf.h
new file mode 100644
index 000000000000..8d20972aba2c
--- /dev/null
+++ b/arch/tile/include/hv/netio_intf.h
@@ -0,0 +1,2975 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * NetIO interface structures and macros.
+ */
+
+#ifndef __NETIO_INTF_H__
+#define __NETIO_INTF_H__
+
+#include <hv/netio_errors.h>
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__)
+#include <assert.h>
+#define netio_assert assert /**< Enable assertions from macros */
+#else
+#define netio_assert(...) ((void)(0)) /**< Disable assertions from macros */
+#endif
+
+/*
+ * If none of these symbols are defined, we're building libnetio in an
+ * environment where we have pthreads, so we'll enable locking.
+ */
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__) && \
+ !defined(__NEWLIB__)
+#define _NETIO_PTHREAD /**< Include a mutex in netio_queue_t below */
+
+/*
+ * If NETIO_UNLOCKED is defined, we don't do use per-cpu locks on
+ * per-packet NetIO operations. We still do pthread locking on things
+ * like netio_input_register, though. This is used for building
+ * libnetio_unlocked.
+ */
+#ifndef NETIO_UNLOCKED
+
+/* Avoid PLT overhead by using our own inlined per-cpu lock. */
+#include <sched.h>
+typedef int _netio_percpu_mutex_t;
+
+static __inline int
+_netio_percpu_mutex_init(_netio_percpu_mutex_t* lock)
+{
+ *lock = 0;
+ return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_lock(_netio_percpu_mutex_t* lock)
+{
+ while (__builtin_expect(__insn_tns(lock), 0))
+ sched_yield();
+ return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_unlock(_netio_percpu_mutex_t* lock)
+{
+ *lock = 0;
+ return 0;
+}
+
+#else /* NETIO_UNLOCKED */
+
+/* Don't do any locking for per-packet NetIO operations. */
+typedef int _netio_percpu_mutex_t;
+#define _netio_percpu_mutex_init(L)
+#define _netio_percpu_mutex_lock(L)
+#define _netio_percpu_mutex_unlock(L)
+
+#endif /* NETIO_UNLOCKED */
+#endif /* !__HV__, !__BOGUX, !__KERNEL__, !__NEWLIB__ */
+
+/** How many tiles can register for a given queue.
+ * @ingroup setup */
+#define NETIO_MAX_TILES_PER_QUEUE 64
+
+
+/** Largest permissible queue identifier.
+ * @ingroup setup */
+#define NETIO_MAX_QUEUE_ID 255
+
+
+#ifndef __DOXYGEN__
+
+/* Metadata packet checksum/ethertype flags. */
+
+/** The L4 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L4_CSUM_SHIFT 0
+#define _NETIO_PKT_NO_L4_CSUM_RMASK 1
+#define _NETIO_PKT_NO_L4_CSUM_MASK \
+ (_NETIO_PKT_NO_L4_CSUM_RMASK << _NETIO_PKT_NO_L4_CSUM_SHIFT)
+
+/** The L3 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L3_CSUM_SHIFT 1
+#define _NETIO_PKT_NO_L3_CSUM_RMASK 1
+#define _NETIO_PKT_NO_L3_CSUM_MASK \
+ (_NETIO_PKT_NO_L3_CSUM_RMASK << _NETIO_PKT_NO_L3_CSUM_SHIFT)
+
+/** The L3 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L3_CSUM_SHIFT 2
+#define _NETIO_PKT_BAD_L3_CSUM_RMASK 1
+#define _NETIO_PKT_BAD_L3_CSUM_MASK \
+ (_NETIO_PKT_BAD_L3_CSUM_RMASK << _NETIO_PKT_BAD_L3_CSUM_SHIFT)
+
+/** The Ethernet packet type is unrecognized. */
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT 3
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_RMASK 1
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_MASK \
+ (_NETIO_PKT_TYPE_UNRECOGNIZED_RMASK << \
+ _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT)
+
+/* Metadata packet type flags. */
+
+/** Where the packet type bits are; this field is the index into
+ * _netio_pkt_info. */
+#define _NETIO_PKT_TYPE_SHIFT 4
+#define _NETIO_PKT_TYPE_RMASK 0x3F
+
+/** How many VLAN tags the packet has, and, if we have two, which one we
+ * actually grouped on. A VLAN within a proprietary (Marvell or Broadcom)
+ * tag is counted here. */
+#define _NETIO_PKT_VLAN_SHIFT 4
+#define _NETIO_PKT_VLAN_RMASK 0x3
+#define _NETIO_PKT_VLAN_MASK \
+ (_NETIO_PKT_VLAN_RMASK << _NETIO_PKT_VLAN_SHIFT)
+#define _NETIO_PKT_VLAN_NONE 0 /* No VLAN tag. */
+#define _NETIO_PKT_VLAN_ONE 1 /* One VLAN tag. */
+#define _NETIO_PKT_VLAN_TWO_OUTER 2 /* Two VLAN tags, outer one used. */
+#define _NETIO_PKT_VLAN_TWO_INNER 3 /* Two VLAN tags, inner one used. */
+
+/** Which proprietary tags the packet has. */
+#define _NETIO_PKT_TAG_SHIFT 6
+#define _NETIO_PKT_TAG_RMASK 0x3
+#define _NETIO_PKT_TAG_MASK \
+ (_NETIO_PKT_TAG_RMASK << _NETIO_PKT_TAG_SHIFT)
+#define _NETIO_PKT_TAG_NONE 0 /* No proprietary tags. */
+#define _NETIO_PKT_TAG_MRVL 1 /* Marvell HyperG.Stack tags. */
+#define _NETIO_PKT_TAG_MRVL_EXT 2 /* HyperG.Stack extended tags. */
+#define _NETIO_PKT_TAG_BRCM 3 /* Broadcom HiGig tags. */
+
+/** Whether a packet has an LLC + SNAP header. */
+#define _NETIO_PKT_SNAP_SHIFT 8
+#define _NETIO_PKT_SNAP_RMASK 0x1
+#define _NETIO_PKT_SNAP_MASK \
+ (_NETIO_PKT_SNAP_RMASK << _NETIO_PKT_SNAP_SHIFT)
+
+/* NOTE: Bits 9 and 10 are unused. */
+
+/** Length of any custom data before the L2 header, in words. */
+#define _NETIO_PKT_CUSTOM_LEN_SHIFT 11
+#define _NETIO_PKT_CUSTOM_LEN_RMASK 0x1F
+#define _NETIO_PKT_CUSTOM_LEN_MASK \
+ (_NETIO_PKT_CUSTOM_LEN_RMASK << _NETIO_PKT_CUSTOM_LEN_SHIFT)
+
+/** The L4 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L4_CSUM_SHIFT 16
+#define _NETIO_PKT_BAD_L4_CSUM_RMASK 0x1
+#define _NETIO_PKT_BAD_L4_CSUM_MASK \
+ (_NETIO_PKT_BAD_L4_CSUM_RMASK << _NETIO_PKT_BAD_L4_CSUM_SHIFT)
+
+/** Length of the L2 header, in words. */
+#define _NETIO_PKT_L2_LEN_SHIFT 17
+#define _NETIO_PKT_L2_LEN_RMASK 0x1F
+#define _NETIO_PKT_L2_LEN_MASK \
+ (_NETIO_PKT_L2_LEN_RMASK << _NETIO_PKT_L2_LEN_SHIFT)
+
+
+/* Flags in minimal packet metadata. */
+
+/** We need an eDMA checksum on this packet. */
+#define _NETIO_PKT_NEED_EDMA_CSUM_SHIFT 0
+#define _NETIO_PKT_NEED_EDMA_CSUM_RMASK 1
+#define _NETIO_PKT_NEED_EDMA_CSUM_MASK \
+ (_NETIO_PKT_NEED_EDMA_CSUM_RMASK << _NETIO_PKT_NEED_EDMA_CSUM_SHIFT)
+
+/* Data within the packet information table. */
+
+/* Note that, for efficiency, code which uses these fields assumes that none
+ * of the shift values below are zero. See uses below for an explanation. */
+
+/** Offset within the L2 header of the innermost ethertype (in halfwords). */
+#define _NETIO_PKT_INFO_ETYPE_SHIFT 6
+#define _NETIO_PKT_INFO_ETYPE_RMASK 0x1F
+
+/** Offset within the L2 header of the VLAN tag (in halfwords). */
+#define _NETIO_PKT_INFO_VLAN_SHIFT 11
+#define _NETIO_PKT_INFO_VLAN_RMASK 0x1F
+
+#endif
+
+
+/** The size of a memory buffer representing a small packet.
+ * @ingroup egress */
+#define SMALL_PACKET_SIZE 256
+
+/** The size of a memory buffer representing a large packet.
+ * @ingroup egress */
+#define LARGE_PACKET_SIZE 2048
+
+/** The size of a memory buffer representing a jumbo packet.
+ * @ingroup egress */
+#define JUMBO_PACKET_SIZE (12 * 1024)
+
+
+/* Common ethertypes.
+ * @ingroup ingress */
+/** @{ */
+/** The ethertype of IPv4. */
+#define ETHERTYPE_IPv4 (0x0800)
+/** The ethertype of ARP. */
+#define ETHERTYPE_ARP (0x0806)
+/** The ethertype of VLANs. */
+#define ETHERTYPE_VLAN (0x8100)
+/** The ethertype of a Q-in-Q header. */
+#define ETHERTYPE_Q_IN_Q (0x9100)
+/** The ethertype of IPv6. */
+#define ETHERTYPE_IPv6 (0x86DD)
+/** The ethertype of MPLS. */
+#define ETHERTYPE_MPLS (0x8847)
+/** @} */
+
+
+/** The possible return values of NETIO_PKT_STATUS.
+ * @ingroup ingress
+ */
+typedef enum
+{
+ /** No problems were detected with this packet. */
+ NETIO_PKT_STATUS_OK,
+ /** The packet is undersized; this is expected behavior if the packet's
+ * ethertype is unrecognized, but otherwise the packet is likely corrupt. */
+ NETIO_PKT_STATUS_UNDERSIZE,
+ /** The packet is oversized and some trailing bytes have been discarded.
+ This is expected behavior for short packets, since it's impossible to
+ precisely determine the amount of padding which may have been added to
+ them to make them meet the minimum Ethernet packet size. */
+ NETIO_PKT_STATUS_OVERSIZE,
+ /** The packet was judged to be corrupt by hardware (for instance, it had
+ a bad CRC, or part of it was discarded due to lack of buffer space in
+ the I/O shim) and should be discarded. */
+ NETIO_PKT_STATUS_BAD
+} netio_pkt_status_t;
+
+
+/** Log2 of how many buckets we have. */
+#define NETIO_LOG2_NUM_BUCKETS (10)
+
+/** How many buckets we have.
+ * @ingroup ingress */
+#define NETIO_NUM_BUCKETS (1 << NETIO_LOG2_NUM_BUCKETS)
+
+
+/**
+ * @brief A group-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given group.
+ */
+typedef union {
+ /** The header broken down into bits. */
+ struct {
+ /** Whether we should balance on L4, if available */
+ unsigned int __balance_on_l4:1;
+ /** Whether we should balance on L3, if available */
+ unsigned int __balance_on_l3:1;
+ /** Whether we should balance on L2, if available */
+ unsigned int __balance_on_l2:1;
+ /** Reserved for future use */
+ unsigned int __reserved:1;
+ /** The base bucket to use to send traffic */
+ unsigned int __bucket_base:NETIO_LOG2_NUM_BUCKETS;
+ /** The mask to apply to the balancing value. This must be one less
+ * than a power of two, e.g. 0x3 or 0xFF.
+ */
+ unsigned int __bucket_mask:NETIO_LOG2_NUM_BUCKETS;
+ /** Pad to 32 bits */
+ unsigned int __padding:(32 - 4 - 2 * NETIO_LOG2_NUM_BUCKETS);
+ } bits;
+ /** To send out the IDN. */
+ unsigned int word;
+}
+netio_group_t;
+
+
+/**
+ * @brief A VLAN-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given VLAN.
+ */
+typedef netio_group_t netio_vlan_t;
+
+
+/**
+ * A bucket-to-queue mapping.
+ * @ingroup setup
+ */
+typedef unsigned char netio_bucket_t;
+
+
+/**
+ * A packet size can always fit in a netio_size_t.
+ * @ingroup setup
+ */
+typedef unsigned int netio_size_t;
+
+
+/**
+ * @brief Ethernet standard (ingress) packet metadata.
+ *
+ * @ingroup ingress
+ *
+ * This is additional data associated with each packet.
+ * This structure is opaque and accessed through the @ref ingress.
+ *
+ * Also, the buffer population operation currently assumes that standard
+ * metadata is at least as large as minimal metadata, and will need to be
+ * modified if that is no longer the case.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ /** This structure is opaque. */
+ unsigned char opaque[24];
+#else
+ /** The overall ordinal of the packet */
+ unsigned int __packet_ordinal;
+ /** The ordinal of the packet within the group */
+ unsigned int __group_ordinal;
+ /** The best flow hash IPP could compute. */
+ unsigned int __flow_hash;
+ /** Flags pertaining to checksum calculation, packet type, etc. */
+ unsigned int __flags;
+ /** The first word of "user data". */
+ unsigned int __user_data_0;
+ /** The second word of "user data". */
+ unsigned int __user_data_1;
+#endif
+}
+netio_pkt_metadata_t;
+
+
+/** To ensure that the L3 header is aligned mod 4, the L2 header should be
+ * aligned mod 4 plus 2, since every supported L2 header is 4n + 2 bytes
+ * long. The standard way to do this is to simply add 2 bytes of padding
+ * before the L2 header.
+ */
+#define NETIO_PACKET_PADDING 2
+
+
+
+/**
+ * @brief Ethernet minimal (egress) packet metadata.
+ *
+ * @ingroup egress
+ *
+ * This structure represents information about packets which have
+ * been processed by @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer(). This structure is opaque
+ * and accessed through the @ref egress.
+ *
+ * @internal This structure is actually copied into the memory used by
+ * standard metadata, which is assumed to be large enough.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ /** This structure is opaque. */
+ unsigned char opaque[14];
+#else
+ /** The offset of the L2 header from the start of the packet data. */
+ unsigned short l2_offset;
+ /** The offset of the L3 header from the start of the packet data. */
+ unsigned short l3_offset;
+ /** Where to write the checksum. */
+ unsigned char csum_location;
+ /** Where to start checksumming from. */
+ unsigned char csum_start;
+ /** Flags pertaining to checksum calculation etc. */
+ unsigned short flags;
+ /** The L2 length of the packet. */
+ unsigned short l2_length;
+ /** The checksum with which to seed the checksum generator. */
+ unsigned short csum_seed;
+ /** How much to checksum. */
+ unsigned short csum_length;
+#endif
+}
+netio_pkt_minimal_metadata_t;
+
+
+#ifndef __DOXYGEN__
+
+/**
+ * @brief An I/O notification header.
+ *
+ * This is the first word of data received from an I/O shim in a notification
+ * packet. It contains framing and status information.
+ */
+typedef union
+{
+ unsigned int word; /**< The whole word. */
+ /** The various fields. */
+ struct
+ {
+ unsigned int __channel:7; /**< Resource channel. */
+ unsigned int __type:4; /**< Type. */
+ unsigned int __ack:1; /**< Whether an acknowledgement is needed. */
+ unsigned int __reserved:1; /**< Reserved. */
+ unsigned int __protocol:1; /**< A protocol-specific word is added. */
+ unsigned int __status:2; /**< Status of the transfer. */
+ unsigned int __framing:2; /**< Framing of the transfer. */
+ unsigned int __transfer_size:14; /**< Transfer size in bytes (total). */
+ } bits;
+}
+__netio_pkt_notif_t;
+
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_HANDLE_BASE(p) \
+ ((unsigned char*)((p).word & 0xFFFFFFC0))
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_BASE(p) \
+ _NETIO_PKT_HANDLE_BASE(p->__packet)
+
+/**
+ * @brief An I/O notification packet (second word)
+ *
+ * This is the second word of data received from an I/O shim in a notification
+ * packet. This is the virtual address of the packet buffer, plus some flag
+ * bits. (The virtual address of the packet is always 256-byte aligned so we
+ * have room for 8 bits' worth of flags in the low 8 bits.)
+ *
+ * @internal
+ * NOTE: The low two bits must contain "__queue", so the "packet size"
+ * (SIZE_SMALL, SIZE_LARGE, or SIZE_JUMBO) can be determined quickly.
+ *
+ * If __addr or __offset are moved, _NETIO_PKT_BASE
+ * (defined right below this) must be changed.
+ */
+typedef union
+{
+ unsigned int word; /**< The whole word. */
+ /** The various fields. */
+ struct
+ {
+ /** Which queue the packet will be returned to once it is sent back to
+ the IPP. This is one of the SIZE_xxx values. */
+ unsigned int __queue:2;
+
+ /** The IPP handle of the sending IPP. */
+ unsigned int __ipp_handle:2;
+
+ /** Reserved for future use. */
+ unsigned int __reserved:1;
+
+ /** If 1, this packet has minimal (egress) metadata; otherwise, it
+ has standard (ingress) metadata. */
+ unsigned int __minimal:1;
+
+ /** Offset of the metadata within the packet. This value is multiplied
+ * by 64 and added to the base packet address to get the metadata
+ * address. Note that this field is aligned within the word such that
+ * you can easily extract the metadata address with a 26-bit mask. */
+ unsigned int __offset:2;
+
+ /** The top 24 bits of the packet's virtual address. */
+ unsigned int __addr:24;
+ } bits;
+}
+__netio_pkt_handle_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/**
+ * @brief A handle for an I/O packet's storage.
+ * @ingroup ingress
+ *
+ * netio_pkt_handle_t encodes the concept of a ::netio_pkt_t with its
+ * packet metadata removed. It is a much smaller type that exists to
+ * facilitate applications where the full ::netio_pkt_t type is too
+ * large, such as those that cache enormous numbers of packets or wish
+ * to transmit packet descriptors over the UDN.
+ *
+ * Because there is no metadata, most ::netio_pkt_t operations cannot be
+ * performed on a netio_pkt_handle_t. It supports only
+ * netio_free_handle() (to free the buffer) and
+ * NETIO_PKT_CUSTOM_DATA_H() (to access a pointer to its contents).
+ * The application must acquire any additional metadata it wants from the
+ * original ::netio_pkt_t and record it separately.
+ *
+ * A netio_pkt_handle_t can be extracted from a ::netio_pkt_t by calling
+ * NETIO_PKT_HANDLE(). An invalid handle (analogous to NULL) can be
+ * created by assigning the value ::NETIO_PKT_HANDLE_NONE. A handle can
+ * be tested for validity with NETIO_PKT_HANDLE_IS_VALID().
+ */
+typedef struct
+{
+ unsigned int word; /**< Opaque bits. */
+} netio_pkt_handle_t;
+
+/**
+ * @brief A packet descriptor.
+ *
+ * @ingroup ingress
+ * @ingroup egress
+ *
+ * This data structure represents a packet. The structure is manipulated
+ * through the @ref ingress and the @ref egress.
+ *
+ * While the contents of a netio_pkt_t are opaque, the structure itself is
+ * portable. This means that it may be shared between all tiles which have
+ * done a netio_input_register() call for the interface on which the pkt_t
+ * was initially received (via netio_get_packet()) or retrieved (via
+ * netio_get_buffer()). The contents of a netio_pkt_t can be transmitted to
+ * another tile via shared memory, or via a UDN message, or by other means.
+ * The destination tile may then use the pkt_t as if it had originally been
+ * received locally; it may read or write the packet's data, read its
+ * metadata, free the packet, send the packet, transfer the netio_pkt_t to
+ * yet another tile, and so forth.
+ *
+ * Once a netio_pkt_t has been transferred to a second tile, the first tile
+ * should not reference the original copy; in particular, if more than one
+ * tile frees or sends the same netio_pkt_t, the IPP's packet free lists will
+ * become corrupted. Note also that each tile which reads or modifies
+ * packet data must obey the memory coherency rules outlined in @ref input.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ /** This structure is opaque. */
+ unsigned char opaque[32];
+#else
+ /** For an ingress packet (one with standard metadata), this is the
+ * notification header we got from the I/O shim. For an egress packet
+ * (one with minimal metadata), this word is zero if the packet has not
+ * been populated, and nonzero if it has. */
+ __netio_pkt_notif_t __notif_header;
+
+ /** Virtual address of the packet buffer, plus state flags. */
+ __netio_pkt_handle_t __packet;
+
+ /** Metadata associated with the packet. */
+ netio_pkt_metadata_t __metadata;
+#endif
+}
+netio_pkt_t;
+
+
+#ifndef __DOXYGEN__
+
+#define __NETIO_PKT_NOTIF_HEADER(pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE(pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_QUEUE(pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_NOTIF_HEADER_M(mda, pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE_M(mda, pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_MINIMAL(pkt) ((pkt)->__packet.bits.__minimal)
+#define __NETIO_PKT_QUEUE_M(mda, pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_FLAGS_M(mda, pkt) ((mda)->__flags)
+
+/* Packet information table, used by the attribute access functions below. */
+extern const uint16_t _netio_pkt_info[];
+
+#endif /* __DOXYGEN__ */
+
+
+#ifndef __DOXYGEN__
+/* These macros are deprecated and will disappear in a future MDE release. */
+#define NETIO_PKT_GOOD_CHECKSUM(pkt) \
+ NETIO_PKT_L4_CSUM_CORRECT(pkt)
+#define NETIO_PKT_GOOD_CHECKSUM_M(mda, pkt) \
+ NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt)
+#endif /* __DOXYGEN__ */
+
+
+/* Packet attribute access functions. */
+
+/** Return a pointer to the metadata for a packet.
+ * @ingroup ingress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_M" suffix usually improves performance. This
+ * function must be called on an 'ingress' packet (i.e. one retrieved
+ * by @ref netio_get_packet(), on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer have not been called). Use of this
+ * function on an 'egress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_metadata_t*
+NETIO_PKT_METADATA(netio_pkt_t* pkt)
+{
+ netio_assert(!pkt->__packet.bits.__minimal);
+ return &pkt->__metadata;
+}
+
+
+/** Return a pointer to the minimal metadata for a packet.
+ * @ingroup egress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_MM" suffix usually improves performance. This
+ * function must be called on an 'egress' packet (i.e. one on which
+ * @ref netio_populate_buffer() or @ref netio_populate_prepend_buffer()
+ * have been called, or one retrieved by @ref netio_get_buffer()). Use of
+ * this function on an 'ingress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_minimal_metadata_t*
+NETIO_PKT_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+ netio_assert(pkt->__packet.bits.__minimal);
+ return (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+}
+
+
+/** Determine whether a packet has 'minimal' metadata.
+ * @ingroup pktfuncs
+ *
+ * This function will return nonzero if the packet is an 'egress'
+ * packet (i.e. one on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer() have been called, or one
+ * retrieved by @ref netio_get_buffer()), and zero if the packet
+ * is an 'ingress' packet (i.e. one retrieved by @ref netio_get_packet(),
+ * which has not been converted into an 'egress' packet).
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet has minimal metadata.
+ */
+static __inline unsigned int
+NETIO_PKT_IS_MINIMAL(netio_pkt_t* pkt)
+{
+ return pkt->__packet.bits.__minimal;
+}
+
+
+/** Return a handle for a packet's storage.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A handle for the packet's storage.
+ */
+static __inline netio_pkt_handle_t
+NETIO_PKT_HANDLE(netio_pkt_t* pkt)
+{
+ netio_pkt_handle_t h;
+ h.word = pkt->__packet.word;
+ return h;
+}
+
+
+/** A special reserved value indicating the absence of a packet handle.
+ *
+ * @ingroup pktfuncs
+ */
+#define NETIO_PKT_HANDLE_NONE ((netio_pkt_handle_t) { 0 })
+
+
+/** Test whether a packet handle is valid.
+ *
+ * Applications may wish to use the reserved value NETIO_PKT_HANDLE_NONE
+ * to indicate no packet at all. This function tests to see if a packet
+ * handle is a real handle, not this special reserved value.
+ *
+ * @ingroup pktfuncs
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return One if the packet handle is valid, else zero.
+ */
+static __inline unsigned int
+NETIO_PKT_HANDLE_IS_VALID(netio_pkt_handle_t handle)
+{
+ return handle.word != 0;
+}
+
+
+
+/** Return a pointer to the start of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_H(netio_pkt_handle_t handle)
+{
+ return _NETIO_PKT_HANDLE_BASE(handle) + NETIO_PACKET_PADDING;
+}
+
+
+/** Return the length of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ /*
+ * Note that we effectively need to extract a quantity from the flags word
+ * which is measured in words, and then turn it into bytes by shifting
+ * it left by 2. We do this all at once by just shifting right two less
+ * bits, and shifting the mask up two bits.
+ */
+ return ((mda->__flags >> (_NETIO_PKT_CUSTOM_LEN_SHIFT - 2)) &
+ (_NETIO_PKT_CUSTOM_LEN_RMASK << 2));
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (__NETIO_PKT_NOTIF_HEADER(pkt).bits.__transfer_size -
+ NETIO_PACKET_PADDING);
+}
+
+
+/** Return a pointer to the start of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return NETIO_PKT_CUSTOM_DATA_H(NETIO_PKT_HANDLE(pkt));
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ /*
+ * Note that we effectively need to extract a quantity from the flags word
+ * which is measured in words, and then turn it into bytes by shifting
+ * it left by 2. We do this all at once by just shifting right two less
+ * bits, and shifting the mask up two bits. We then add two bytes.
+ */
+ return ((mda->__flags >> (_NETIO_PKT_L2_LEN_SHIFT - 2)) &
+ (_NETIO_PKT_L2_LEN_RMASK << 2)) + 2;
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt) -
+ NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the start of the packet's L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_CUSTOM_DATA_M(mda, pkt) +
+ NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally,
+ * the IP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_L2_LENGTH_M(mda, pkt) -
+ NETIO_PKT_L2_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup ingress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_L2_DATA_M(mda, pkt) +
+ NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero. (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.) The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals. Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__packet_ordinal;
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values. In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.) The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals. Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__group_ordinal;
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value will be zero if the packet does not have a VLAN tag, or if
+ * this value was not extracted from the packet.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ int vl = (mda->__flags >> _NETIO_PKT_VLAN_SHIFT) & _NETIO_PKT_VLAN_RMASK;
+ unsigned short* pkt_p;
+ int index;
+ unsigned short val;
+
+ if (vl == _NETIO_PKT_VLAN_NONE)
+ return 0;
+
+ pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+ index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+ val = pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_VLAN_SHIFT) &
+ _NETIO_PKT_INFO_VLAN_RMASK];
+
+#ifdef __TILECC__
+ return (__insn_bytex(val) >> 16) & 0xFFF;
+#else
+ return (__builtin_bswap32(val) >> 16) & 0xFFF;
+#endif
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED_M()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ unsigned short* pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+ int index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+ unsigned short val =
+ pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_ETYPE_SHIFT) &
+ _NETIO_PKT_INFO_ETYPE_RMASK];
+
+ return __builtin_bswap32(val) >> 16;
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__flow_hash;
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__user_data_0;
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__user_data_1;
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags & _NETIO_PKT_NO_L4_CSUM_MASK);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ * be correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags &
+ (_NETIO_PKT_BAD_L4_CSUM_MASK | _NETIO_PKT_NO_L4_CSUM_MASK));
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags & _NETIO_PKT_NO_L3_CSUM_MASK);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ * correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags &
+ (_NETIO_PKT_BAD_L3_CSUM_MASK | _NETIO_PKT_NO_L3_CSUM_MASK));
+}
+
+
+/** Determine whether the ethertype was recognized and L3 packet data was
+ * processed.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the ethertype was recognized and L3 packet data was
+ * processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags & _NETIO_PKT_TYPE_UNRECOGNIZED_MASK);
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length. Normally, applications should use
+ * @ref NETIO_PKT_BAD_M() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ * its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return ((NETIO_PKT_STATUS_M(mda, pkt) & 1) &&
+ (NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt) ||
+ NETIO_PKT_STATUS_M(mda, pkt) == NETIO_PKT_STATUS_BAD));
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return mmd->l2_length;
+}
+
+
+/** Return the length of the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+ return mmd->l3_offset - mmd->l2_offset;
+}
+
+
+/** Return the length of the packet, starting with the L3 (IP) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_L2_LENGTH_MM(mmd, pkt) -
+ NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup egress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return _NETIO_PKT_BASE(pkt) + mmd->l3_offset;
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return _NETIO_PKT_BASE(pkt) + mmd->l2_offset;
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length. Normally, applications should use
+ * @ref NETIO_PKT_BAD() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS(netio_pkt_t* pkt)
+{
+ netio_assert(!pkt->__packet.bits.__minimal);
+
+ return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ * its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_BAD_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt);
+}
+
+
+/** Return a pointer to the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_CUSTOM_DATA_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt);
+ }
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L2_LENGTH_M(mda, pkt);
+ }
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L2_DATA_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L2_DATA_M(mda, pkt);
+ }
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally, the IP)
+ * header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L3_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_LENGTH_M(mda, pkt);
+ }
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup pktfuncs
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L3_DATA_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_DATA_M(mda, pkt);
+ }
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero. (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.) The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals. Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values. In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.) The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals. Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_GROUP_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This is usually also contained within the packet header. If the packet
+ * does not have a VLAN tag, the VLAN ID returned by this function is zero.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_VLAN_ID_M(mda, pkt);
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_ETHERTYPE_M(mda, pkt);
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_FLOW_HASH_M(mda, pkt);
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_USER_DATA_0_M(mda, pkt);
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_USER_DATA_1_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L4_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ * be correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ * correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the Ethertype was recognized and L3 packet data was
+ * processed.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the Ethertype was recognized and L3 packet data was
+ * processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt);
+}
+
+
+/** Set an egress packet's L2 length, using a metadata pointer to speed the
+ * computation.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt,
+ int len)
+{
+ mmd->l2_length = len;
+}
+
+
+/** Set an egress packet's L2 length.
+ * @ingroup egress
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH(netio_pkt_t* pkt, int len)
+{
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ NETIO_PKT_SET_L2_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set an egress packet's L2 header length, using a metadata pointer to
+ * speed the computation.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet. It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt, int len)
+{
+ mmd->l3_offset = mmd->l2_offset + len;
+}
+
+
+/** Set an egress packet's L2 header length.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet. It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH(netio_pkt_t* pkt, int len)
+{
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ NETIO_PKT_SET_L2_HEADER_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set up an egress packet for hardware checksum computation, using a
+ * metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ * NetIO provides the ability to automatically calculate a standard
+ * 16-bit Internet checksum on transmitted packets. The application
+ * may specify the point in the packet where the checksum starts, the
+ * number of bytes to be checksummed, and the two bytes in the packet
+ * which will be replaced with the completed checksum. (If the range
+ * of bytes to be checksummed includes the bytes to be replaced, the
+ * initial values of those bytes will be included in the checksum.)
+ *
+ * For some protocols, the packet checksum covers data which is not present
+ * in the packet, or is at least not contiguous to the main data payload.
+ * For instance, the TCP checksum includes a "pseudo-header" which includes
+ * the source and destination IP addresses of the packet. To accommodate
+ * this, the checksum engine may be "seeded" with an initial value, which
+ * the application would need to compute based on the specific protocol's
+ * requirements. Note that the seed is given in host byte order (little-
+ * endian), not network byte order (big-endian); code written to compute a
+ * pseudo-header checksum in network byte order will need to byte-swap it
+ * before use as the seed.
+ *
+ * Note that the checksum is computed as part of the transmission process,
+ * so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ * the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ * the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ * to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ * packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt, int start, int length,
+ int location, uint16_t seed)
+{
+ mmd->csum_start = start;
+ mmd->csum_length = length;
+ mmd->csum_location = location;
+ mmd->csum_seed = seed;
+ mmd->flags |= _NETIO_PKT_NEED_EDMA_CSUM_MASK;
+}
+
+
+/** Set up an egress packet for hardware checksum computation.
+ * @ingroup egress
+ *
+ * NetIO provides the ability to automatically calculate a standard
+ * 16-bit Internet checksum on transmitted packets. The application
+ * may specify the point in the packet where the checksum starts, the
+ * number of bytes to be checksummed, and the two bytes in the packet
+ * which will be replaced with the completed checksum. (If the range
+ * of bytes to be checksummed includes the bytes to be replaced, the
+ * initial values of those bytes will be included in the checksum.)
+ *
+ * For some protocols, the packet checksum covers data which is not present
+ * in the packet, or is at least not contiguous to the main data payload.
+ * For instance, the TCP checksum includes a "pseudo-header" which includes
+ * the source and destination IP addresses of the packet. To accommodate
+ * this, the checksum engine may be "seeded" with an initial value, which
+ * the application would need to compute based on the specific protocol's
+ * requirements. Note that the seed is given in host byte order (little-
+ * endian), not network byte order (big-endian); code written to compute a
+ * pseudo-header checksum in network byte order will need to byte-swap it
+ * before use as the seed.
+ *
+ * Note that the checksum is computed as part of the transmission process,
+ * so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ * the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ * the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ * to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ * packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM(netio_pkt_t* pkt, int start, int length,
+ int location, uint16_t seed)
+{
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ NETIO_PKT_DO_EGRESS_CSUM_MM(mmd, pkt, start, length, location, seed);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ * metadata pointer to speed the operation.
+ * See @ref netio_populate_prepend_buffer() to get a full description of
+ * prepending.
+ *
+ * @param[in,out] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (pkt->__packet.bits.__offset << 6) +
+ NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ * metadata pointer to speed the operation.
+ * See @ref netio_populate_prepend_buffer() to get a full description of
+ * prepending.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return (pkt->__packet.bits.__offset << 6) + mmd->l2_offset;
+}
+
+
+/** Return the number of bytes which could be prepended to a packet.
+ * See @ref netio_populate_prepend_buffer() to get a full description of
+ * prepending.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_PREPEND_AVAIL_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_PREPEND_AVAIL_M(mda, pkt);
+ }
+}
+
+
+/** Flush a packet's minimal metadata from the cache, using a metadata pointer
+ * to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache, using a metadata
+ * pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache,
+ * using a metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache, using a metadata pointer
+ * to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache, using a metadata
+ * pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache,
+ * using a metadata pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+/** Number of NUMA nodes we can distribute buffers to.
+ * @ingroup setup */
+#define NETIO_NUM_NODE_WEIGHTS 16
+
+/**
+ * @brief An object for specifying the characteristics of NetIO communication
+ * endpoint.
+ *
+ * @ingroup setup
+ *
+ * The @ref netio_input_register() function uses this structure to define
+ * how an application tile will communicate with an IPP.
+ *
+ *
+ * Future updates to NetIO may add new members to this structure,
+ * which can affect the success of the registration operation. Thus,
+ * if dynamically initializing the structure, applications are urged to
+ * zero it out first, for example:
+ *
+ * @code
+ * netio_input_config_t config;
+ * memset(&config, 0, sizeof (config));
+ * config.flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE;
+ * config.num_receive_packets = NETIO_MAX_RECEIVE_PKTS;
+ * config.queue_id = 0;
+ * .
+ * .
+ * .
+ * @endcode
+ *
+ * since that guarantees that any unused structure members, including
+ * members which did not exist when the application was first developed,
+ * will not have unexpected values.
+ *
+ * If statically initializing the structure, we strongly recommend use of
+ * C99-style named initializers, for example:
+ *
+ * @code
+ * netio_input_config_t config = {
+ * .flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE,
+ * .num_receive_packets = NETIO_MAX_RECEIVE_PKTS,
+ * .queue_id = 0,
+ * },
+ * @endcode
+ *
+ * instead of the old-style structure initialization:
+ *
+ * @code
+ * // Bad example! Currently equivalent to the above, but don't do this.
+ * netio_input_config_t config = {
+ * NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE, NETIO_MAX_RECEIVE_PKTS, 0
+ * },
+ * @endcode
+ *
+ * since the C99 style requires no changes to the code if elements of the
+ * config structure are rearranged. (It also makes the initialization much
+ * easier to understand.)
+ *
+ * Except for items which address a particular tile's transmit or receive
+ * characteristics, such as the ::NETIO_RECV flag, applications are advised
+ * to specify the same set of configuration data on all registrations.
+ * This prevents differing results if multiple tiles happen to do their
+ * registration operations in a different order on different invocations of
+ * the application. This is particularly important for things like link
+ * management flags, and buffer size and homing specifications.
+ *
+ * Unless the ::NETIO_FIXED_BUFFER_VA flag is specified in flags, the NetIO
+ * buffer pool is automatically created and mapped into the application's
+ * virtual address space at an address chosen by the operating system,
+ * using the common memory (cmem) facility in the Tilera Multicore
+ * Components library. The cmem facility allows multiple processes to gain
+ * access to shared memory which is mapped into each process at an
+ * identical virtual address. In order for this to work, the processes
+ * must have a common ancestor, which must create the common memory using
+ * tmc_cmem_init().
+ *
+ * In programs using the iLib process creation API, or in programs which use
+ * only one process (which include programs using the pthreads library),
+ * tmc_cmem_init() is called automatically. All other applications
+ * must call it explicitly, before any child processes which might call
+ * netio_input_register() are created.
+ */
+typedef struct
+{
+ /** Registration characteristics.
+
+ This value determines several characteristics of the registration;
+ flags for different types of behavior are ORed together to make the
+ final flag value. Generally applications should specify exactly
+ one flag from each of the following categories:
+
+ - Whether the application will be receiving packets on this queue
+ (::NETIO_RECV or ::NETIO_NO_RECV).
+
+ - Whether the application will be transmitting packets on this queue,
+ and if so, whether it will request egress checksum calculation
+ (::NETIO_XMIT, ::NETIO_XMIT_CSUM, or ::NETIO_NO_XMIT). It is
+ legal to call netio_get_buffer() without one of the XMIT flags,
+ as long as ::NETIO_RECV is specified; in this case, the retrieved
+ buffers must be passed to another tile for transmission.
+
+ - Whether the application expects any vendor-specific tags in
+ its packets' L2 headers (::NETIO_TAG_NONE, ::NETIO_TAG_BRCM,
+ or ::NETIO_TAG_MRVL). This must match the configuration of the
+ target IPP.
+
+ To accommodate applications written to previous versions of the NetIO
+ interface, none of the flags above are currently required; if omitted,
+ NetIO behaves more or less as if ::NETIO_RECV | ::NETIO_XMIT_CSUM |
+ ::NETIO_TAG_NONE were used. However, explicit specification of
+ the relevant flags allows NetIO to do a better job of resource
+ allocation, allows earlier detection of certain configuration errors,
+ and may enable advanced features or higher performance in the future,
+ so their use is strongly recommended.
+
+ Note that specifying ::NETIO_NO_RECV along with ::NETIO_NO_XMIT
+ is a special case, intended primarily for use by programs which
+ retrieve network statistics or do link management operations.
+ When these flags are both specified, the resulting queue may not
+ be used with NetIO routines other than netio_get(), netio_set(),
+ and netio_input_unregister(). See @ref link for more information
+ on link management.
+
+ Other flags are optional; their use is described below.
+ */
+ int flags;
+
+ /** Interface name. This is a string which identifies the specific
+ Ethernet controller hardware to be used. The format of the string
+ is a device type and a device index, separated by a slash; so,
+ the first 10 Gigabit Ethernet controller is named "xgbe/0", while
+ the second 10/100/1000 Megabit Ethernet controller is named "gbe/1".
+ */
+ const char* interface;
+
+ /** Receive packet queue size. This specifies the maximum number
+ of ingress packets that can be received on this queue without
+ being retrieved by @ref netio_get_packet(). If the IPP's distribution
+ algorithm calls for a packet to be sent to this queue, and this
+ number of packets are already pending there, the new packet
+ will either be discarded, or sent to another tile registered
+ for the same queue_id (see @ref drops). This value must
+ be at least ::NETIO_MIN_RECEIVE_PKTS, can always be at least
+ ::NETIO_MAX_RECEIVE_PKTS, and may be larger than that on certain
+ interfaces.
+ */
+ int num_receive_packets;
+
+ /** The queue ID being requested. Legal values for this range from 0
+ to ::NETIO_MAX_QUEUE_ID, inclusive. ::NETIO_MAX_QUEUE_ID is always
+ greater than or equal to the number of tiles; this allows one queue
+ for each tile, plus at least one additional queue. Some applications
+ may wish to use the additional queue as a destination for unwanted
+ packets, since packets delivered to queues for which no tiles have
+ registered are discarded.
+ */
+ unsigned int queue_id;
+
+ /** Maximum number of small send buffers to be held in the local empty
+ buffer cache. This specifies the size of the area which holds
+ empty small egress buffers requested from the IPP but not yet
+ retrieved via @ref netio_get_buffer(). This value must be greater
+ than zero if the application will ever use @ref netio_get_buffer()
+ to allocate empty small egress buffers; it may be no larger than
+ ::NETIO_MAX_SEND_BUFFERS. See @ref epp for more details on empty
+ buffer caching.
+ */
+ int num_send_buffers_small_total;
+
+ /** Number of small send buffers to be preallocated at registration.
+ If this value is nonzero, the specified number of empty small egress
+ buffers will be requested from the IPP during the netio_input_register
+ operation; this may speed the execution of @ref netio_get_buffer().
+ This may be no larger than @ref num_send_buffers_small_total. See @ref
+ epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_small_prealloc;
+
+ /** Maximum number of large send buffers to be held in the local empty
+ buffer cache. This specifies the size of the area which holds empty
+ large egress buffers requested from the IPP but not yet retrieved via
+ @ref netio_get_buffer(). This value must be greater than zero if the
+ application will ever use @ref netio_get_buffer() to allocate empty
+ large egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+ See @ref epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_large_total;
+
+ /** Number of large send buffers to be preallocated at registration.
+ If this value is nonzero, the specified number of empty large egress
+ buffers will be requested from the IPP during the netio_input_register
+ operation; this may speed the execution of @ref netio_get_buffer().
+ This may be no larger than @ref num_send_buffers_large_total. See @ref
+ epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_large_prealloc;
+
+ /** Maximum number of jumbo send buffers to be held in the local empty
+ buffer cache. This specifies the size of the area which holds empty
+ jumbo egress buffers requested from the IPP but not yet retrieved via
+ @ref netio_get_buffer(). This value must be greater than zero if the
+ application will ever use @ref netio_get_buffer() to allocate empty
+ jumbo egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+ See @ref epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_jumbo_total;
+
+ /** Number of jumbo send buffers to be preallocated at registration.
+ If this value is nonzero, the specified number of empty jumbo egress
+ buffers will be requested from the IPP during the netio_input_register
+ operation; this may speed the execution of @ref netio_get_buffer().
+ This may be no larger than @ref num_send_buffers_jumbo_total. See @ref
+ epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_jumbo_prealloc;
+
+ /** Total packet buffer size. This determines the total size, in bytes,
+ of the NetIO buffer pool. Note that the maximum number of available
+ buffers of each size is determined during hypervisor configuration
+ (see the <em>System Programmer's Guide</em> for details); this just
+ influences how much host memory is allocated for those buffers.
+
+ The buffer pool is allocated from common memory, which will be
+ automatically initialized if needed. If your buffer pool is larger
+ than 240 MB, you might need to explicitly call @c tmc_cmem_init(),
+ as described in the Application Libraries Reference Manual (UG227).
+
+ Packet buffers are currently allocated in chunks of 16 MB; this
+ value will be rounded up to the next larger multiple of 16 MB.
+ If this value is zero, a default of 32 MB will be used; this was
+ the value used by previous versions of NetIO. Note that taking this
+ default also affects the placement of buffers on Linux NUMA nodes.
+ See @ref buffer_node_weights for an explanation of buffer placement.
+
+ In order to successfully allocate packet buffers, Linux must have
+ available huge pages on the relevant Linux NUMA nodes. See the
+ <em>System Programmer's Guide</em> for information on configuring
+ huge page support in Linux.
+ */
+ uint64_t total_buffer_size;
+
+ /** Buffer placement weighting factors.
+
+ This array specifies the relative amount of buffering to place
+ on each of the available Linux NUMA nodes. This array is
+ indexed by the NUMA node, and the values in the array are
+ proportional to the amount of buffer space to allocate on that
+ node.
+
+ If memory striping is enabled in the Hypervisor, then there is
+ only one logical NUMA node (node 0). In that case, NetIO will by
+ default ignore the suggested buffer node weights, and buffers
+ will be striped across the physical memory controllers. See
+ UG209 System Programmer's Guide for a description of the
+ hypervisor option that controls memory striping.
+
+ If memory striping is disabled, then there are up to four NUMA
+ nodes, corresponding to the four DDRAM controllers in the TILE
+ processor architecture. See UG100 Tile Processor Architecture
+ Overview for a diagram showing the location of each of the DDRAM
+ controllers relative to the tile array.
+
+ For instance, if memory striping is disabled, the following
+ configuration strucure:
+
+ @code
+ netio_input_config_t config = {
+ .
+ .
+ .
+ .total_buffer_size = 4 * 16 * 1024 * 1024;
+ .buffer_node_weights = { 1, 0, 1, 0 },
+ },
+ @endcode
+
+ would result in 32 MB of buffers being placed on controller 0, and
+ 32 MB on controller 2. (Since buffers are allocated in units of
+ 16 MB, some sets of weights will not be able to be matched exactly.)
+
+ For the weights to be effective, @ref total_buffer_size must be
+ nonzero. If @ref total_buffer_size is zero, causing the default
+ 32 MB of buffer space to be used, then any specified weights will
+ be ignored, and buffers will positioned as they were in previous
+ versions of NetIO:
+
+ - For xgbe/0 and gbe/0, 16 MB of buffers will be placed on controller 1,
+ and the other 16 MB will be placed on controller 2.
+
+ - For xgbe/1 and gbe/1, 16 MB of buffers will be placed on controller 2,
+ and the other 16 MB will be placed on controller 3.
+
+ If @ref total_buffer_size is nonzero, but all weights are zero,
+ then all buffer space will be allocated on Linux NUMA node zero.
+
+ By default, the specified buffer placement is treated as a hint;
+ if sufficient free memory is not available on the specified
+ controllers, the buffers will be allocated elsewhere. However,
+ if the ::NETIO_STRICT_HOMING flag is specified in @ref flags, then a
+ failure to allocate buffer space exactly as requested will cause the
+ registration operation to fail with an error of ::NETIO_CANNOT_HOME.
+
+ Note that maximal network performance cannot be achieved with
+ only one memory controller.
+ */
+ uint8_t buffer_node_weights[NETIO_NUM_NODE_WEIGHTS];
+
+ /** Fixed virtual address for packet buffers. Only valid when
+ ::NETIO_FIXED_BUFFER_VA is specified in @ref flags; see the
+ description of that flag for details.
+ */
+ void* fixed_buffer_va;
+
+ /**
+ Maximum number of outstanding send packet requests. This value is
+ only relevant when an EPP is in use; it determines the number of
+ slots in the EPP's outgoing packet queue which this tile is allowed
+ to consume, and thus the number of packets which may be sent before
+ the sending tile must wait for an acknowledgment from the EPP.
+ Modifying this value is generally only helpful when using @ref
+ netio_send_packet_vector(), where it can help improve performance by
+ allowing a single vector send operation to process more packets.
+ Typically it is not specified, and the default, which divides the
+ outgoing packet slots evenly between all tiles on the chip, is used.
+
+ If a registration asks for more outgoing packet queue slots than are
+ available, ::NETIO_TOOMANY_XMIT will be returned. The total number
+ of packet queue slots which are available for all tiles for each EPP
+ is subject to change, but is currently ::NETIO_TOTAL_SENDS_OUTSTANDING.
+
+
+ This value is ignored if ::NETIO_XMIT is not specified in flags.
+ If you want to specify a large value here for a specific tile, you are
+ advised to specify NETIO_NO_XMIT on other, non-transmitting tiles so
+ that they do not consume a default number of packet slots. Any tile
+ transmitting is required to have at least ::NETIO_MIN_SENDS_OUTSTANDING
+ slots allocated to it; values less than that will be silently
+ increased by the NetIO library.
+ */
+ int num_sends_outstanding;
+}
+netio_input_config_t;
+
+
+/** Registration flags; used in the @ref netio_input_config_t structure.
+ * @addtogroup setup
+ */
+/** @{ */
+
+/** Fail a registration request if we can't put packet buffers
+ on the specified memory controllers. */
+#define NETIO_STRICT_HOMING 0x00000002
+
+/** This application expects no tags on its L2 headers. */
+#define NETIO_TAG_NONE 0x00000004
+
+/** This application expects Marvell extended tags on its L2 headers. */
+#define NETIO_TAG_MRVL 0x00000008
+
+/** This application expects Broadcom tags on its L2 headers. */
+#define NETIO_TAG_BRCM 0x00000010
+
+/** This registration may call routines which receive packets. */
+#define NETIO_RECV 0x00000020
+
+/** This registration may not call routines which receive packets. */
+#define NETIO_NO_RECV 0x00000040
+
+/** This registration may call routines which transmit packets. */
+#define NETIO_XMIT 0x00000080
+
+/** This registration may call routines which transmit packets with
+ checksum acceleration. */
+#define NETIO_XMIT_CSUM 0x00000100
+
+/** This registration may not call routines which transmit packets. */
+#define NETIO_NO_XMIT 0x00000200
+
+/** This registration wants NetIO buffers mapped at an application-specified
+ virtual address.
+
+ NetIO buffers are by default created by the TMC common memory facility,
+ which must be configured by a common ancestor of all processes sharing
+ a network interface. When this flag is specified, NetIO buffers are
+ instead mapped at an address chosen by the application (and specified
+ in @ref netio_input_config_t::fixed_buffer_va). This allows multiple
+ unrelated but cooperating processes to share a NetIO interface.
+ All processes sharing the same interface must specify this flag,
+ and all must specify the same fixed virtual address.
+
+ @ref netio_input_config_t::fixed_buffer_va must be a
+ multiple of 16 MB, and the packet buffers will occupy @ref
+ netio_input_config_t::total_buffer_size bytes of virtual address
+ space, beginning at that address. If any of those virtual addresses
+ are currently occupied by other memory objects, like application or
+ shared library code or data, @ref netio_input_register() will return
+ ::NETIO_FAULT. While it is impossible to provide a fixed_buffer_va
+ which will work for all applications, a good first guess might be to
+ use 0xb0000000 minus @ref netio_input_config_t::total_buffer_size.
+ If that fails, it might be helpful to consult the running application's
+ virtual address description file (/proc/<em>pid</em>/maps) to see
+ which regions of virtual address space are available.
+ */
+#define NETIO_FIXED_BUFFER_VA 0x00000400
+
+/** This registration call will not complete unless the network link
+ is up. The process will wait several seconds for this to happen (the
+ precise interval is link-dependent), but if the link does not come up,
+ ::NETIO_LINK_DOWN will be returned. This flag is the default if
+ ::NETIO_NOREQUIRE_LINK_UP is not specified. Note that this flag by
+ itself does not request that the link be brought up; that can be done
+ with the ::NETIO_AUTO_LINK_UPDN or ::NETIO_AUTO_LINK_UP flags (the
+ latter is the default if no NETIO_AUTO_LINK_xxx flags are specified),
+ or by explicitly setting the link's desired state via netio_set().
+ If the link is not brought up by one of those methods, and this flag
+ is specified, the registration operation will return ::NETIO_LINK_DOWN.
+ This flag is ignored if it is specified along with ::NETIO_NO_XMIT and
+ ::NETIO_NO_RECV. See @ref link for more information on link
+ management.
+ */
+#define NETIO_REQUIRE_LINK_UP 0x00000800
+
+/** This registration call will complete even if the network link is not up.
+ Whenever the link is not up, packets will not be sent or received:
+ netio_get_packet() will return ::NETIO_NOPKT once all queued packets
+ have been drained, and netio_send_packet() and similar routines will
+ return NETIO_QUEUE_FULL once the outgoing packet queue in the EPP
+ or the I/O shim is full. See @ref link for more information on link
+ management.
+ */
+#define NETIO_NOREQUIRE_LINK_UP 0x00001000
+
+#ifndef __DOXYGEN__
+/*
+ * These are part of the implementation of the NETIO_AUTO_LINK_xxx flags,
+ * but should not be used directly by applications, and are thus not
+ * documented.
+ */
+#define _NETIO_AUTO_UP 0x00002000
+#define _NETIO_AUTO_DN 0x00004000
+#define _NETIO_AUTO_PRESENT 0x00008000
+#endif
+
+/** Set the desired state of the link to up, allowing any speeds which are
+ supported by the link hardware, as part of this registration operation.
+ Do not take down the link automatically. This is the default if
+ no other NETIO_AUTO_LINK_xxx flags are specified. This flag is ignored
+ if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+ See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UP (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP)
+
+/** Set the desired state of the link to up, allowing any speeds which are
+ supported by the link hardware, as part of this registration operation.
+ Set the desired state of the link to down the next time no tiles are
+ registered for packet reception or transmission. This flag is ignored
+ if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+ See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UPDN (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP | \
+ _NETIO_AUTO_DN)
+
+/** Set the desired state of the link to down the next time no tiles are
+ registered for packet reception or transmission. This flag is ignored
+ if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+ See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_DN (_NETIO_AUTO_PRESENT | _NETIO_AUTO_DN)
+
+/** Do not bring up the link automatically as part of this registration
+ operation. Do not take down the link automatically. This flag
+ is ignored if it is specified along with ::NETIO_NO_XMIT and
+ ::NETIO_NO_RECV. See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_NONE _NETIO_AUTO_PRESENT
+
+
+/** Minimum number of receive packets. */
+#define NETIO_MIN_RECEIVE_PKTS 16
+
+/** Lower bound on the maximum number of receive packets; may be higher
+ than this on some interfaces. */
+#define NETIO_MAX_RECEIVE_PKTS 128
+
+/** Maximum number of send buffers, per packet size. */
+#define NETIO_MAX_SEND_BUFFERS 16
+
+/** Number of EPP queue slots, and thus outstanding sends, per EPP. */
+#define NETIO_TOTAL_SENDS_OUTSTANDING 2015
+
+/** Minimum number of EPP queue slots, and thus outstanding sends, per
+ * transmitting tile. */
+#define NETIO_MIN_SENDS_OUTSTANDING 16
+
+
+/**@}*/
+
+#ifndef __DOXYGEN__
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+struct __netio_queue_impl_t;
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+struct __netio_queue_user_impl_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/** A netio_queue_t describes a NetIO communications endpoint.
+ * @ingroup setup
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ uint8_t opaque[8]; /**< This is an opaque structure. */
+#else
+ struct __netio_queue_impl_t* __system_part; /**< The system part. */
+ struct __netio_queue_user_impl_t* __user_part; /**< The user part. */
+#ifdef _NETIO_PTHREAD
+ _netio_percpu_mutex_t lock; /**< Queue lock. */
+#endif
+#endif
+}
+netio_queue_t;
+
+
+/**
+ * @brief Packet send context.
+ *
+ * @ingroup egress
+ *
+ * Packet send context for use with netio_send_packet_prepare and _commit.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ uint8_t opaque[44]; /**< This is an opaque structure. */
+#else
+ uint8_t flags; /**< Defined below */
+ uint8_t datalen; /**< Number of valid words pointed to by data. */
+ uint32_t request[9]; /**< Request to be sent to the EPP or shim. Note
+ that this is smaller than the 11-word maximum
+ request size, since some constant values are
+ not saved in the context. */
+ uint32_t *data; /**< Data to be sent to the EPP or shim via IDN. */
+#endif
+}
+netio_send_pkt_context_t;
+
+
+#ifndef __DOXYGEN__
+#define SEND_PKT_CTX_USE_EPP 1 /**< We're sending to an EPP. */
+#define SEND_PKT_CTX_SEND_CSUM 2 /**< Request includes a checksum. */
+#endif
+
+/**
+ * @brief Packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * This data structure is used with netio_send_packet_vector() to send multiple
+ * packets with one NetIO call. The structure should be initialized by
+ * calling netio_pkt_vector_set(), rather than by setting the fields
+ * directly.
+ *
+ * This structure is guaranteed to be a power of two in size, no
+ * bigger than one L2 cache line, and to be aligned modulo its size.
+ */
+typedef struct
+#ifndef __DOXYGEN__
+__attribute__((aligned(8)))
+#endif
+{
+ /** Reserved for use by the user application. When initialized with
+ * the netio_set_pkt_vector_entry() function, this field is guaranteed
+ * to be visible to readers only after all other fields are already
+ * visible. This way it can be used as a valid flag or generation
+ * counter. */
+ uint8_t user_data;
+
+ /* Structure members below this point should not be accessed directly by
+ * applications, as they may change in the future. */
+
+ /** Low 8 bits of the packet address to send. The high bits are
+ * acquired from the 'handle' field. */
+ uint8_t buffer_address_low;
+
+ /** Number of bytes to transmit. */
+ uint16_t size;
+
+ /** The raw handle from a netio_pkt_t. If this is NETIO_PKT_HANDLE_NONE,
+ * this vector entry will be skipped and no packet will be transmitted. */
+ netio_pkt_handle_t handle;
+}
+netio_pkt_vector_entry_t;
+
+
+/**
+ * @brief Initialize fields in a packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * @param[out] v Pointer to the vector entry to be initialized.
+ * @param[in] pkt Packet to be transmitted when the vector entry is passed to
+ * netio_send_packet_vector(). Note that the packet's attributes
+ * (e.g., its L2 offset and length) are captured at the time this
+ * routine is called; subsequent changes in those attributes will not
+ * be reflected in the packet which is actually transmitted.
+ * Changes in the packet's contents, however, will be so reflected.
+ * If this is NULL, no packet will be transmitted.
+ * @param[in] user_data User data to be set in the vector entry.
+ * This function guarantees that the "user_data" field will become
+ * visible to a reader only after all other fields have become visible.
+ * This allows a structure in a ring buffer to be written and read
+ * by a polling reader without any locks or other synchronization.
+ */
+static __inline void
+netio_pkt_vector_set(volatile netio_pkt_vector_entry_t* v, netio_pkt_t* pkt,
+ uint8_t user_data)
+{
+ if (pkt)
+ {
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd =
+ (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+ v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_MM(mmd, pkt) & 0xFF;
+ v->size = NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = &pkt->__metadata;
+ v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_M(mda, pkt) & 0xFF;
+ v->size = NETIO_PKT_L2_LENGTH_M(mda, pkt);
+ }
+ v->handle.word = pkt->__packet.word;
+ }
+ else
+ {
+ v->handle.word = 0; /* Set handle to NETIO_PKT_HANDLE_NONE. */
+ }
+
+ __asm__("" : : : "memory");
+
+ v->user_data = user_data;
+}
+
+
+/**
+ * Flags and structures for @ref netio_get() and @ref netio_set().
+ * @ingroup config
+ */
+
+/** @{ */
+/** Parameter class; addr is a NETIO_PARAM_xxx value. */
+#define NETIO_PARAM 0
+/** Interface MAC address. This address is only valid with @ref netio_get().
+ * The value is a 6-byte MAC address. Depending upon the overall system
+ * design, a MAC address may or may not be available for each interface. */
+#define NETIO_PARAM_MAC 0
+
+/** Determine whether to suspend output on the receipt of pause frames.
+ * If the value is nonzero, the I/O shim will suspend output when a pause
+ * frame is received. If the value is zero, pause frames will be ignored. */
+#define NETIO_PARAM_PAUSE_IN 1
+
+/** Determine whether to send pause frames if the I/O shim packet FIFOs are
+ * nearly full. If the value is zero, pause frames are not sent. If
+ * the value is nonzero, it is the delay value which will be sent in any
+ * pause frames which are output, in units of 512 bit times. */
+#define NETIO_PARAM_PAUSE_OUT 2
+
+/** Jumbo frame support. The value is a 4-byte integer. If the value is
+ * nonzero, the MAC will accept frames of up to 10240 bytes. If the value
+ * is zero, the MAC will only accept frames of up to 1544 bytes. */
+#define NETIO_PARAM_JUMBO 3
+
+/** I/O shim's overflow statistics register. The value is two 16-bit integers.
+ * The first 16-bit value (or the low 16 bits, if the value is treated as a
+ * 32-bit number) is the count of packets which were completely dropped and
+ * not delivered by the shim. The second 16-bit value (or the high 16 bits,
+ * if the value is treated as a 32-bit number) is the count of packets
+ * which were truncated and thus only partially delivered by the shim. This
+ * register is automatically reset to zero after it has been read.
+ */
+#define NETIO_PARAM_OVERFLOW 4
+
+/** IPP statistics. This address is only valid with @ref netio_get(). The
+ * value is a netio_stat_t structure. Unlike the I/O shim statistics, the
+ * IPP statistics are not all reset to zero on read; see the description
+ * of the netio_stat_t for details. */
+#define NETIO_PARAM_STAT 5
+
+/** Possible link state. The value is a combination of "NETIO_LINK_xxx"
+ * flags. With @ref netio_get(), this will indicate which flags are
+ * actually supported by the hardware.
+ *
+ * For historical reasons, specifying this value to netio_set() will have
+ * the same behavior as using ::NETIO_PARAM_LINK_CONFIG, but this usage is
+ * discouraged.
+ */
+#define NETIO_PARAM_LINK_POSSIBLE_STATE 6
+
+/** Link configuration. The value is a combination of "NETIO_LINK_xxx" flags.
+ * With @ref netio_set(), this will attempt to immediately bring up the
+ * link using whichever of the requested flags are supported by the
+ * hardware, or take down the link if the flags are zero; if this is
+ * not possible, an error will be returned. Many programs will want
+ * to use ::NETIO_PARAM_LINK_DESIRED_STATE instead.
+ *
+ * For historical reasons, specifying this value to netio_get() will
+ * have the same behavior as using ::NETIO_PARAM_LINK_POSSIBLE_STATE,
+ * but this usage is discouraged.
+ */
+#define NETIO_PARAM_LINK_CONFIG NETIO_PARAM_LINK_POSSIBLE_STATE
+
+/** Current link state. This address is only valid with @ref netio_get().
+ * The value is zero or more of the "NETIO_LINK_xxx" flags, ORed together.
+ * If the link is down, the value ANDed with NETIO_LINK_SPEED will be
+ * zero; if the link is up, the value ANDed with NETIO_LINK_SPEED will
+ * result in exactly one of the NETIO_LINK_xxx values, indicating the
+ * current speed. */
+#define NETIO_PARAM_LINK_CURRENT_STATE 7
+
+/** Variant symbol for current state, retained for compatibility with
+ * pre-MDE-2.1 programs. */
+#define NETIO_PARAM_LINK_STATUS NETIO_PARAM_LINK_CURRENT_STATE
+
+/** Packet Coherence protocol. This address is only valid with @ref netio_get().
+ * The value is nonzero if the interface is configured for cache-coherent DMA.
+ */
+#define NETIO_PARAM_COHERENT 8
+
+/** Desired link state. The value is a conbination of "NETIO_LINK_xxx"
+ * flags, which specify the desired state for the link. With @ref
+ * netio_set(), this will, in the background, attempt to bring up the link
+ * using whichever of the requested flags are reasonable, or take down the
+ * link if the flags are zero. The actual link up or down operation may
+ * happen after this call completes. If the link state changes in the
+ * future, the system will continue to try to get back to the desired link
+ * state; for instance, if the link is brought up successfully, and then
+ * the network cable is disconnected, the link will go down. However, the
+ * desired state of the link is still up, so if the cable is reconnected,
+ * the link will be brought up again.
+ *
+ * With @ref netio_get(), this will indicate the desired state for the
+ * link, as set with a previous netio_set() call, or implicitly by a
+ * netio_input_register() or netio_input_unregister() operation. This may
+ * not reflect the current state of the link; to get that, use
+ * ::NETIO_PARAM_LINK_CURRENT_STATE. */
+#define NETIO_PARAM_LINK_DESIRED_STATE 9
+
+/** NetIO statistics structure. Retrieved using the ::NETIO_PARAM_STAT
+ * address passed to @ref netio_get(). */
+typedef struct
+{
+ /** Number of packets which have been received by the IPP and forwarded
+ * to a tile's receive queue for processing. This value wraps at its
+ * maximum, and is not cleared upon read. */
+ uint32_t packets_received;
+
+ /** Number of packets which have been dropped by the IPP, because they could
+ * not be received, or could not be forwarded to a tile. The former happens
+ * when the IPP does not have a free packet buffer of suitable size for an
+ * incoming frame. The latter happens when all potential destination tiles
+ * for a packet, as defined by the group, bucket, and queue configuration,
+ * have full receive queues. This value wraps at its maximum, and is not
+ * cleared upon read. */
+ uint32_t packets_dropped;
+
+ /*
+ * Note: the #defines after each of the following four one-byte values
+ * denote their location within the third word of the netio_stat_t. They
+ * are intended for use only by the IPP implementation and are thus omitted
+ * from the Doxygen output.
+ */
+
+ /** Number of packets dropped because no worker was able to accept a new
+ * packet. This value saturates at its maximum, and is cleared upon
+ * read. */
+ uint8_t drops_no_worker;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_WORKER 0
+#endif
+
+ /** Number of packets dropped because no small buffers were available.
+ * This value saturates at its maximum, and is cleared upon read. */
+ uint8_t drops_no_smallbuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_SMALLBUF 1
+#endif
+
+ /** Number of packets dropped because no large buffers were available.
+ * This value saturates at its maximum, and is cleared upon read. */
+ uint8_t drops_no_largebuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_LARGEBUF 2
+#endif
+
+ /** Number of packets dropped because no jumbo buffers were available.
+ * This value saturates at its maximum, and is cleared upon read. */
+ uint8_t drops_no_jumbobuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_JUMBOBUF 3
+#endif
+}
+netio_stat_t;
+
+
+/** Link can run, should run, or is running at 10 Mbps. */
+#define NETIO_LINK_10M 0x01
+
+/** Link can run, should run, or is running at 100 Mbps. */
+#define NETIO_LINK_100M 0x02
+
+/** Link can run, should run, or is running at 1 Gbps. */
+#define NETIO_LINK_1G 0x04
+
+/** Link can run, should run, or is running at 10 Gbps. */
+#define NETIO_LINK_10G 0x08
+
+/** Link should run at the highest speed supported by the link and by
+ * the device connected to the link. Only usable as a value for
+ * the link's desired state; never returned as a value for the current
+ * or possible states. */
+#define NETIO_LINK_ANYSPEED 0x10
+
+/** All legal link speeds. */
+#define NETIO_LINK_SPEED (NETIO_LINK_10M | \
+ NETIO_LINK_100M | \
+ NETIO_LINK_1G | \
+ NETIO_LINK_10G | \
+ NETIO_LINK_ANYSPEED)
+
+
+/** MAC register class. Addr is a register offset within the MAC.
+ * Registers within the XGbE and GbE MACs are documented in the Tile
+ * Processor I/O Device Guide (UG104). MAC registers start at address
+ * 0x4000, and do not include the MAC_INTERFACE registers. */
+#define NETIO_MAC 1
+
+/** MDIO register class (IEEE 802.3 clause 22 format). Addr is the "addr"
+ * member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO 2
+
+/** MDIO register class (IEEE 802.3 clause 45 format). Addr is the "addr"
+ * member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO_CLAUSE45 3
+
+/** NetIO MDIO address type. Retrieved or provided using the ::NETIO_MDIO
+ * address passed to @ref netio_get() or @ref netio_set(). */
+typedef union
+{
+ struct
+ {
+ unsigned int reg:16; /**< MDIO register offset. For clause 22 access,
+ must be less than 32. */
+ unsigned int phy:5; /**< Which MDIO PHY to access. */
+ unsigned int dev:5; /**< Which MDIO device to access within that PHY.
+ Applicable for clause 45 access only; ignored
+ for clause 22 access. */
+ }
+ bits; /**< Container for bitfields. */
+ uint64_t addr; /**< Value to pass to @ref netio_get() or
+ * @ref netio_set(). */
+}
+netio_mdio_addr_t;
+
+/** @} */
+
+#endif /* __NETIO_INTF_H__ */
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
index 112b1e248f05..b4c8e8ec45dc 100644
--- a/arch/tile/kernel/Makefile
+++ b/arch/tile/kernel/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c
index 67617a05e602..dbc213adf5e1 100644
--- a/arch/tile/kernel/compat.c
+++ b/arch/tile/kernel/compat.c
@@ -21,7 +21,6 @@
#include <linux/kdev_t.h>
#include <linux/fs.h>
#include <linux/fcntl.h>
-#include <linux/smp_lock.h>
#include <linux/uaccess.h>
#include <linux/signal.h>
#include <asm/syscalls.h>
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index fb64b99959d4..543d6a33aa26 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -15,7 +15,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
new file mode 100644
index 000000000000..a1ee25be9ad9
--- /dev/null
+++ b/arch/tile/kernel/pci.c
@@ -0,0 +1,621 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/byteorder.h>
+#include <asm/hv_driver.h>
+#include <hv/drv_pcie_rc_intf.h>
+
+
+/*
+ * Initialization flow and process
+ * -------------------------------
+ *
+ * This files containes the routines to search for PCI buses,
+ * enumerate the buses, and configure any attached devices.
+ *
+ * There are two entry points here:
+ * 1) tile_pci_init
+ * This sets up the pci_controller structs, and opens the
+ * FDs to the hypervisor. This is called from setup_arch() early
+ * in the boot process.
+ * 2) pcibios_init
+ * This probes the PCI bus(es) for any attached hardware. It's
+ * called by subsys_initcall. All of the real work is done by the
+ * generic Linux PCI layer.
+ *
+ */
+
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+int __write_once tile_plx_gen1;
+
+static struct pci_controller controllers[TILE_NUM_PCIE];
+static int num_controllers;
+
+static struct pci_ops tile_cfg_ops;
+
+
+/*
+ * We don't need to worry about the alignment of resources.
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ return res->start;
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Open a FD to the hypervisor PCI device.
+ *
+ * controller_id is the controller number, config type is 0 or 1 for
+ * config0 or config1 operations.
+ */
+static int __init tile_pcie_open(int controller_id, int config_type)
+{
+ char filename[32];
+ int fd;
+
+ sprintf(filename, "pcie/%d/config%d", controller_id, config_type);
+
+ fd = hv_dev_open((HV_VirtAddr)filename, 0);
+
+ return fd;
+}
+
+
+/*
+ * Get the IRQ numbers from the HV and set up the handlers for them.
+ */
+static int __init tile_init_irqs(int controller_id,
+ struct pci_controller *controller)
+{
+ char filename[32];
+ int fd;
+ int ret;
+ int x;
+ struct pcie_rc_config rc_config;
+
+ sprintf(filename, "pcie/%d/ctl", controller_id);
+ fd = hv_dev_open((HV_VirtAddr)filename, 0);
+ if (fd < 0) {
+ pr_err("PCI: hv_dev_open(%s) failed\n", filename);
+ return -1;
+ }
+ ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config),
+ sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF);
+ hv_dev_close(fd);
+ if (ret != sizeof(rc_config)) {
+ pr_err("PCI: wanted %zd bytes, got %d\n",
+ sizeof(rc_config), ret);
+ return -1;
+ }
+ /* Record irq_base so that we can map INTx to IRQ # later. */
+ controller->irq_base = rc_config.intr;
+
+ for (x = 0; x < 4; x++)
+ tile_irq_activate(rc_config.intr + x,
+ TILE_IRQ_HW_CLEAR);
+
+ if (rc_config.plx_gen1)
+ controller->plx_gen1 = 1;
+
+ return 0;
+}
+
+/*
+ * First initialization entry point, called from setup_arch().
+ *
+ * Find valid controllers and fill in pci_controller structs for each
+ * of them.
+ *
+ * Returns the number of controllers discovered.
+ */
+int __init tile_pci_init(void)
+{
+ int i;
+
+ pr_info("PCI: Searching for controllers...\n");
+
+ /* Do any configuration we need before using the PCIe */
+
+ for (i = 0; i < TILE_NUM_PCIE; i++) {
+ int hv_cfg_fd0 = -1;
+ int hv_cfg_fd1 = -1;
+ int hv_mem_fd = -1;
+ char name[32];
+ struct pci_controller *controller;
+
+ /*
+ * Open the fd to the HV. If it fails then this
+ * device doesn't exist.
+ */
+ hv_cfg_fd0 = tile_pcie_open(i, 0);
+ if (hv_cfg_fd0 < 0)
+ continue;
+ hv_cfg_fd1 = tile_pcie_open(i, 1);
+ if (hv_cfg_fd1 < 0) {
+ pr_err("PCI: Couldn't open config fd to HV "
+ "for controller %d\n", i);
+ goto err_cont;
+ }
+
+ sprintf(name, "pcie/%d/mem", i);
+ hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
+ if (hv_mem_fd < 0) {
+ pr_err("PCI: Could not open mem fd to HV!\n");
+ goto err_cont;
+ }
+
+ pr_info("PCI: Found PCI controller #%d\n", i);
+
+ controller = &controllers[num_controllers];
+
+ if (tile_init_irqs(i, controller)) {
+ pr_err("PCI: Could not initialize "
+ "IRQs, aborting.\n");
+ goto err_cont;
+ }
+
+ controller->index = num_controllers;
+ controller->hv_cfg_fd[0] = hv_cfg_fd0;
+ controller->hv_cfg_fd[1] = hv_cfg_fd1;
+ controller->hv_mem_fd = hv_mem_fd;
+ controller->first_busno = 0;
+ controller->last_busno = 0xff;
+ controller->ops = &tile_cfg_ops;
+
+ num_controllers++;
+ continue;
+
+err_cont:
+ if (hv_cfg_fd0 >= 0)
+ hv_dev_close(hv_cfg_fd0);
+ if (hv_cfg_fd1 >= 0)
+ hv_dev_close(hv_cfg_fd1);
+ if (hv_mem_fd >= 0)
+ hv_dev_close(hv_mem_fd);
+ continue;
+ }
+
+ /*
+ * Before using the PCIe, see if we need to do any platform-specific
+ * configuration, such as the PLX switch Gen 1 issue on TILEmpower.
+ */
+ for (i = 0; i < num_controllers; i++) {
+ struct pci_controller *controller = &controllers[i];
+
+ if (controller->plx_gen1)
+ tile_plx_gen1 = 1;
+ }
+
+ return num_controllers;
+}
+
+/*
+ * (pin - 1) converts from the PCI standard's [1:4] convention to
+ * a normal [0:3] range.
+ */
+static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct pci_controller *controller =
+ (struct pci_controller *)dev->sysdata;
+ return (pin - 1) + controller->irq_base;
+}
+
+
+static void __init fixup_read_and_payload_sizes(void)
+{
+ struct pci_dev *dev = NULL;
+ int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
+ int max_read_size = 0x2; /* Limit to 512 byte reads. */
+ u16 new_values;
+
+ /* Scan for the smallest maximum payload size. */
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ int pcie_caps_offset;
+ u32 devcap;
+ int max_payload;
+
+ pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pcie_caps_offset == 0)
+ continue;
+
+ pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
+ &devcap);
+ max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
+ if (max_payload < smallest_max_payload)
+ smallest_max_payload = max_payload;
+ }
+
+ /* Now, set the max_payload_size for all devices to that value. */
+ new_values = (max_read_size << 12) | (smallest_max_payload << 5);
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ int pcie_caps_offset;
+ u16 devctl;
+
+ pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pcie_caps_offset == 0)
+ continue;
+
+ pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+ &devctl);
+ devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
+ devctl |= new_values;
+ pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+ devctl);
+ }
+}
+
+
+/*
+ * Second PCI initialization entry point, called by subsys_initcall.
+ *
+ * The controllers have been set up by the time we get here, by a call to
+ * tile_pci_init.
+ */
+static int __init pcibios_init(void)
+{
+ int i;
+
+ pr_info("PCI: Probing PCI hardware\n");
+
+ /*
+ * Delay a bit in case devices aren't ready. Some devices are
+ * known to require at least 20ms here, but we use a more
+ * conservative value.
+ */
+ mdelay(250);
+
+ /* Scan all of the recorded PCI controllers. */
+ for (i = 0; i < num_controllers; i++) {
+ struct pci_controller *controller = &controllers[i];
+ struct pci_bus *bus;
+
+ pr_info("PCI: initializing controller #%d\n", i);
+
+ /*
+ * This comes from the generic Linux PCI driver.
+ *
+ * It reads the PCI tree for this bus into the Linux
+ * data structures.
+ *
+ * This is inlined in linux/pci.h and calls into
+ * pci_scan_bus_parented() in probe.c.
+ */
+ bus = pci_scan_bus(0, controller->ops, controller);
+ controller->root_bus = bus;
+ controller->last_busno = bus->subordinate;
+
+ }
+
+ /* Do machine dependent PCI interrupt routing */
+ pci_fixup_irqs(pci_common_swizzle, tile_map_irq);
+
+ /*
+ * This comes from the generic Linux PCI driver.
+ *
+ * It allocates all of the resources (I/O memory, etc)
+ * associated with the devices read in above.
+ */
+
+ pci_assign_unassigned_resources();
+
+ /* Configure the max_read_size and max_payload_size values. */
+ fixup_read_and_payload_sizes();
+
+ /* Record the I/O resources in the PCI controller structure. */
+ for (i = 0; i < num_controllers; i++) {
+ struct pci_bus *root_bus = controllers[i].root_bus;
+ struct pci_bus *next_bus;
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &root_bus->devices, bus_list) {
+ /* Find the PCI host controller, ie. the 1st bridge. */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+ (PCI_SLOT(dev->devfn) == 0)) {
+ next_bus = dev->subordinate;
+ controllers[i].mem_resources[0] =
+ *next_bus->resource[0];
+ controllers[i].mem_resources[1] =
+ *next_bus->resource[1];
+ controllers[i].mem_resources[2] =
+ *next_bus->resource[2];
+
+ break;
+ }
+ }
+
+ }
+
+ return 0;
+}
+subsys_initcall(pcibios_init);
+
+/*
+ * No bus fixups needed.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+ /* Nothing needs to be done. */
+}
+
+/*
+ * This can be called from the generic PCI layer, but doesn't need to
+ * do anything.
+ */
+char __devinit *pcibios_setup(char *str)
+{
+ /* Nothing needs to be done. */
+ return str;
+}
+
+/*
+ * This is called from the generic Linux layer.
+ */
+void __init pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/*
+ * Enable memory and/or address decoding, as appropriate, for the
+ * device described by the 'dev' struct.
+ *
+ * This is called from the generic PCI layer, and can be called
+ * for bridges or endpoints.
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ u8 header_type;
+ int i;
+ struct resource *r;
+
+ pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /*
+ * For bridges, we enable both memory and I/O decoding
+ * in call cases.
+ */
+ cmd |= PCI_COMMAND_IO;
+ cmd |= PCI_COMMAND_MEMORY;
+ } else {
+ /*
+ * For endpoints, we enable memory and/or I/O decoding
+ * only if they have a memory resource of that type.
+ */
+ for (i = 0; i < 6; i++) {
+ r = &dev->resource[i];
+ if (r->flags & IORESOURCE_UNSET) {
+ pr_err("PCI: Device %s not available "
+ "because of resource collisions\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ }
+
+ /*
+ * We only write the command if it changed.
+ */
+ if (cmd != old_cmd)
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ return 0;
+}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+ unsigned long start = pci_resource_start(dev, bar);
+ unsigned long len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (!len)
+ return NULL;
+ if (max && len > max)
+ len = max;
+
+ if (!(flags & IORESOURCE_MEM)) {
+ pr_info("PCI: Trying to map invalid resource %#lx\n", flags);
+ start = 0;
+ }
+
+ return (void __iomem *)start;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+
+/****************************************************************
+ *
+ * Tile PCI config space read/write routines
+ *
+ ****************************************************************/
+
+/*
+ * These are the normal read and write ops
+ * These are expanded with macros from pci_bus_read_config_byte() etc.
+ *
+ * devfn is the combined PCI slot & function.
+ *
+ * offset is in bytes, from the start of config space for the
+ * specified bus & slot.
+ */
+
+static int __devinit tile_cfg_read(struct pci_bus *bus,
+ unsigned int devfn,
+ int offset,
+ int size,
+ u32 *val)
+{
+ struct pci_controller *controller = bus->sysdata;
+ int busnum = bus->number & 0xff;
+ int slot = (devfn >> 3) & 0x1f;
+ int function = devfn & 0x7;
+ u32 addr;
+ int config_mode = 1;
+
+ /*
+ * There is no bridge between the Tile and bus 0, so we
+ * use config0 to talk to bus 0.
+ *
+ * If we're talking to a bus other than zero then we
+ * must have found a bridge.
+ */
+ if (busnum == 0) {
+ /*
+ * We fake an empty slot for (busnum == 0) && (slot > 0),
+ * since there is only one slot on bus 0.
+ */
+ if (slot) {
+ *val = 0xFFFFFFFF;
+ return 0;
+ }
+ config_mode = 0;
+ }
+
+ addr = busnum << 20; /* Bus in 27:20 */
+ addr |= slot << 15; /* Slot (device) in 19:15 */
+ addr |= function << 12; /* Function is in 14:12 */
+ addr |= (offset & 0xFFF); /* byte address in 0:11 */
+
+ return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0,
+ (HV_VirtAddr)(val), size, addr);
+}
+
+
+/*
+ * See tile_cfg_read() for relevent comments.
+ * Note that "val" is the value to write, not a pointer to that value.
+ */
+static int __devinit tile_cfg_write(struct pci_bus *bus,
+ unsigned int devfn,
+ int offset,
+ int size,
+ u32 val)
+{
+ struct pci_controller *controller = bus->sysdata;
+ int busnum = bus->number & 0xff;
+ int slot = (devfn >> 3) & 0x1f;
+ int function = devfn & 0x7;
+ u32 addr;
+ int config_mode = 1;
+ HV_VirtAddr valp = (HV_VirtAddr)&val;
+
+ /*
+ * For bus 0 slot 0 we use config 0 accesses.
+ */
+ if (busnum == 0) {
+ /*
+ * We fake an empty slot for (busnum == 0) && (slot > 0),
+ * since there is only one slot on bus 0.
+ */
+ if (slot)
+ return 0;
+ config_mode = 0;
+ }
+
+ addr = busnum << 20; /* Bus in 27:20 */
+ addr |= slot << 15; /* Slot (device) in 19:15 */
+ addr |= function << 12; /* Function is in 14:12 */
+ addr |= (offset & 0xFFF); /* byte address in 0:11 */
+
+#ifdef __BIG_ENDIAN
+ /* Point to the correct part of the 32-bit "val". */
+ valp += 4 - size;
+#endif
+
+ return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0,
+ valp, size, addr);
+}
+
+
+static struct pci_ops tile_cfg_ops = {
+ .read = tile_cfg_read,
+ .write = tile_cfg_write,
+};
+
+
+/*
+ * In the following, each PCI controller's mem_resources[1]
+ * represents its (non-prefetchable) PCI memory resource.
+ * mem_resources[0] and mem_resources[2] refer to its PCI I/O and
+ * prefetchable PCI memory resources, respectively.
+ * For more details, see pci_setup_bridge() in setup-bus.c.
+ * By comparing the target PCI memory address against the
+ * end address of controller 0, we can determine the controller
+ * that should accept the PCI memory access.
+ */
+#define TILE_READ(size, type) \
+type _tile_read##size(unsigned long addr) \
+{ \
+ type val; \
+ int idx = 0; \
+ if (addr > controllers[0].mem_resources[1].end && \
+ addr > controllers[0].mem_resources[2].end) \
+ idx = 1; \
+ if (hv_dev_pread(controllers[idx].hv_mem_fd, 0, \
+ (HV_VirtAddr)(&val), sizeof(type), addr)) \
+ pr_err("PCI: read %zd bytes at 0x%lX failed\n", \
+ sizeof(type), addr); \
+ return val; \
+} \
+EXPORT_SYMBOL(_tile_read##size)
+
+TILE_READ(b, u8);
+TILE_READ(w, u16);
+TILE_READ(l, u32);
+TILE_READ(q, u64);
+
+#define TILE_WRITE(size, type) \
+void _tile_write##size(type val, unsigned long addr) \
+{ \
+ int idx = 0; \
+ if (addr > controllers[0].mem_resources[1].end && \
+ addr > controllers[0].mem_resources[2].end) \
+ idx = 1; \
+ if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0, \
+ (HV_VirtAddr)(&val), sizeof(type), addr)) \
+ pr_err("PCI: write %zd bytes at 0x%lX failed\n", \
+ sizeof(type), addr); \
+} \
+EXPORT_SYMBOL(_tile_write##size)
+
+TILE_WRITE(b, u8);
+TILE_WRITE(w, u16);
+TILE_WRITE(l, u32);
+TILE_WRITE(q, u64);
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index fb0b3cbeae14..f18573643ed1 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -840,7 +840,7 @@ static int __init topology_init(void)
for_each_online_node(i)
register_one_node(i);
- for_each_present_cpu(i)
+ for (i = 0; i < smp_height * smp_width; ++i)
register_cpu(&cpu_devices[i], i);
return 0;
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index 687719d4abd1..757407e36696 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -16,7 +16,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c
index 74d62d098edf..b949edcec200 100644
--- a/arch/tile/kernel/smpboot.c
+++ b/arch/tile/kernel/smpboot.c
@@ -18,7 +18,6 @@
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
-#include <linux/smp_lock.h>
#include <linux/bootmem.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
diff --git a/arch/tile/kernel/sys.c b/arch/tile/kernel/sys.c
index 7e764669a022..e2187d24a9b4 100644
--- a/arch/tile/kernel/sys.c
+++ b/arch/tile/kernel/sys.c
@@ -20,7 +20,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c
index 6235283b4859..cc3d9badf030 100644
--- a/arch/tile/lib/memchr_32.c
+++ b/arch/tile/lib/memchr_32.c
@@ -18,12 +18,24 @@
void *memchr(const void *s, int c, size_t n)
{
+ const uint32_t *last_word_ptr;
+ const uint32_t *p;
+ const char *last_byte_ptr;
+ uintptr_t s_int;
+ uint32_t goal, before_mask, v, bits;
+ char *ret;
+
+ if (__builtin_expect(n == 0, 0)) {
+ /* Don't dereference any memory if the array is empty. */
+ return NULL;
+ }
+
/* Get an aligned pointer. */
- const uintptr_t s_int = (uintptr_t) s;
- const uint32_t *p = (const uint32_t *)(s_int & -4);
+ s_int = (uintptr_t) s;
+ p = (const uint32_t *)(s_int & -4);
/* Create four copies of the byte for which we are looking. */
- const uint32_t goal = 0x01010101 * (uint8_t) c;
+ goal = 0x01010101 * (uint8_t) c;
/* Read the first word, but munge it so that bytes before the array
* will not match goal.
@@ -31,23 +43,14 @@ void *memchr(const void *s, int c, size_t n)
* Note that this shift count expression works because we know
* shift counts are taken mod 32.
*/
- const uint32_t before_mask = (1 << (s_int << 3)) - 1;
- uint32_t v = (*p | before_mask) ^ (goal & before_mask);
+ before_mask = (1 << (s_int << 3)) - 1;
+ v = (*p | before_mask) ^ (goal & before_mask);
/* Compute the address of the last byte. */
- const char *const last_byte_ptr = (const char *)s + n - 1;
+ last_byte_ptr = (const char *)s + n - 1;
/* Compute the address of the word containing the last byte. */
- const uint32_t *const last_word_ptr =
- (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
-
- uint32_t bits;
- char *ret;
-
- if (__builtin_expect(n == 0, 0)) {
- /* Don't dereference any memory if the array is empty. */
- return NULL;
- }
+ last_word_ptr = (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
while ((bits = __insn_seqb(v, goal)) == 0) {
if (__builtin_expect(p == last_word_ptr, 0)) {
diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c
index 485e24d62c6b..5cd1c4004eca 100644
--- a/arch/tile/lib/spinlock_32.c
+++ b/arch/tile/lib/spinlock_32.c
@@ -167,23 +167,30 @@ void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val)
* when we compare them.
*/
u32 my_ticket_;
+ u32 iterations = 0;
- /* Take out the next ticket; this will also stop would-be readers. */
- if (val & 1)
- val = get_rwlock(rwlock);
- rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
+ /*
+ * Wait until there are no readers, then bump up the next
+ * field and capture the ticket value.
+ */
+ for (;;) {
+ if (!(val & 1)) {
+ if ((val >> RD_COUNT_SHIFT) == 0)
+ break;
+ rwlock->lock = val;
+ }
+ delay_backoff(iterations++);
+ val = __insn_tns((int *)&rwlock->lock);
+ }
- /* Extract my ticket value from the original word. */
+ /* Take out the next ticket and extract my ticket value. */
+ rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
my_ticket_ = val >> WR_NEXT_SHIFT;
- /*
- * Wait until the "current" field matches our ticket, and
- * there are no remaining readers.
- */
+ /* Wait until the "current" field matches our ticket. */
for (;;) {
u32 curr_ = val >> WR_CURR_SHIFT;
- u32 readers = val >> RD_COUNT_SHIFT;
- u32 delta = ((my_ticket_ - curr_) & WR_MASK) + !!readers;
+ u32 delta = ((my_ticket_ - curr_) & WR_MASK);
if (likely(delta == 0))
break;
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index f295b4ac941d..dcebfc831cd6 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -24,7 +24,6 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/tty.h>
diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c
index 24688b697a8d..201a582c4137 100644
--- a/arch/tile/mm/hugetlbpage.c
+++ b/arch/tile/mm/hugetlbpage.c
@@ -21,7 +21,6 @@
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/sysctl.h>
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 7f7338c90784..1664cce7b0ac 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -727,6 +727,9 @@ struct winch {
static void free_winch(struct winch *winch, int free_irq_ok)
{
+ if (free_irq_ok)
+ free_irq(WINCH_IRQ, winch);
+
list_del(&winch->list);
if (winch->pid != -1)
@@ -735,8 +738,6 @@ static void free_winch(struct winch *winch, int free_irq_ok)
os_close_file(winch->fd);
if (winch->stack != 0)
free_stack(winch->stack, 0);
- if (free_irq_ok)
- free_irq(WINCH_IRQ, winch);
kfree(winch);
}
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index 2cd899f75a3c..b7c5bab9bd77 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -38,8 +38,8 @@ struct pt_regs {
struct task_struct;
-extern long subarch_ptrace(struct task_struct *child, long request, long addr,
- long data);
+extern long subarch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data);
extern unsigned long getreg(struct task_struct *child, int regno);
extern int putreg(struct task_struct *child, int regno, unsigned long value);
extern int get_fpregs(struct user_i387_struct __user *buf,
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 340268be00b5..09bd7b585726 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -5,7 +5,6 @@
#include "linux/stddef.h"
#include "linux/fs.h"
-#include "linux/smp_lock.h"
#include "linux/ptrace.h"
#include "linux/sched.h"
#include "linux/slab.h"
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index a5e33f29bbeb..701b672c1122 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -122,7 +122,7 @@ long arch_ptrace(struct task_struct *child, long request,
break;
case PTRACE_SET_THREAD_AREA:
- ret = ptrace_set_thread_area(child, addr, datavp);
+ ret = ptrace_set_thread_area(child, addr, vp);
break;
case PTRACE_FAULTINFO: {
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 849813f398e7..5852519b2d0f 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -28,7 +28,6 @@
#include <linux/syscalls.h>
#include <linux/times.h>
#include <linux/utsname.h>
-#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/uio.h>
#include <linux/poll.h>
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 286de34b0ed6..f6ce0bda3b98 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -141,13 +141,13 @@ static inline void native_apic_msr_write(u32 reg, u32 v)
static inline u32 native_apic_msr_read(u32 reg)
{
- u32 low, high;
+ u64 msr;
if (reg == APIC_DFR)
return -1;
- rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
- return low;
+ rdmsrl(APIC_BASE_MSR + (reg >> 4), msr);
+ return (u32)msr;
}
static inline void native_x2apic_wait_icr_idle(void)
@@ -181,12 +181,12 @@ extern void enable_x2apic(void);
extern void x2apic_icr_write(u32 low, u32 id);
static inline int x2apic_enabled(void)
{
- int msr, msr2;
+ u64 msr;
if (!cpu_has_x2apic)
return 0;
- rdmsr(MSR_IA32_APICBASE, msr, msr2);
+ rdmsrl(MSR_IA32_APICBASE, msr);
if (msr & X2APIC_ENABLE)
return 1;
return 0;
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 4d293dced62f..9479a037419f 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -216,8 +216,8 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
}
/* Return an pointer with offset calculated */
-static inline unsigned long __set_fixmap_offset(enum fixed_addresses idx,
- phys_addr_t phys, pgprot_t flags)
+static __always_inline unsigned long
+__set_fixmap_offset(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
{
__set_fixmap(idx, phys, flags);
return fix_to_virt(idx) + (phys & (PAGE_SIZE - 1));
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index b2f2d2e05cec..6d90adf4428a 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -806,6 +806,78 @@ union uvh_node_present_table_u {
};
/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_0_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_overlay_config_0_mmr_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_1_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_overlay_config_1_mmr_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_2_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_overlay_config_2_mmr_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */
/* ========================================================================= */
#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
@@ -857,6 +929,29 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
};
/* ========================================================================= */
+/* UVH_RH_GAM_CONFIG_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_CONFIG_MMR 0x1600000UL
+
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT 12
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL
+
+union uvh_rh_gam_config_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_config_mmr_s {
+ unsigned long m_skt : 6; /* RW */
+ unsigned long n_skt : 4; /* RW */
+ unsigned long rsvd_10_11: 2; /* */
+ unsigned long mmiol_cfg : 1; /* RW */
+ unsigned long rsvd_13_63: 51; /* */
+ } s;
+};
+
+/* ========================================================================= */
/* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */
/* ========================================================================= */
#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
@@ -987,97 +1082,5 @@ union uvh_rtc1_int_config_u {
} s;
};
-/* ========================================================================= */
-/* UVH_SI_ADDR_MAP_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
-
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
-
-union uvh_si_addr_map_config_u {
- unsigned long v;
- struct uvh_si_addr_map_config_s {
- unsigned long m_skt : 6; /* RW */
- unsigned long rsvd_6_7: 2; /* */
- unsigned long n_skt : 4; /* RW */
- unsigned long rsvd_12_63: 52; /* */
- } s;
-};
-
-/* ========================================================================= */
-/* UVH_SI_ALIAS0_OVERLAY_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
-
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias0_overlay_config_u {
- unsigned long v;
- struct uvh_si_alias0_overlay_config_s {
- unsigned long rsvd_0_23: 24; /* */
- unsigned long base : 8; /* RW */
- unsigned long rsvd_32_47: 16; /* */
- unsigned long m_alias : 5; /* RW */
- unsigned long rsvd_53_62: 10; /* */
- unsigned long enable : 1; /* RW */
- } s;
-};
-
-/* ========================================================================= */
-/* UVH_SI_ALIAS1_OVERLAY_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
-
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias1_overlay_config_u {
- unsigned long v;
- struct uvh_si_alias1_overlay_config_s {
- unsigned long rsvd_0_23: 24; /* */
- unsigned long base : 8; /* RW */
- unsigned long rsvd_32_47: 16; /* */
- unsigned long m_alias : 5; /* RW */
- unsigned long rsvd_53_62: 10; /* */
- unsigned long enable : 1; /* RW */
- } s;
-};
-
-/* ========================================================================= */
-/* UVH_SI_ALIAS2_OVERLAY_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
-
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias2_overlay_config_u {
- unsigned long v;
- struct uvh_si_alias2_overlay_config_s {
- unsigned long rsvd_0_23: 24; /* */
- unsigned long base : 8; /* RW */
- unsigned long rsvd_32_47: 16; /* */
- unsigned long m_alias : 5; /* RW */
- unsigned long rsvd_53_62: 10; /* */
- unsigned long enable : 1; /* RW */
- } s;
-};
-
-#endif /* _ASM_X86_UV_UV_MMRS_H */
+#endif /* __ASM_UV_MMRS_X86_H__ */
diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h
index e8506c1f0c55..1c10c88ee4e1 100644
--- a/arch/x86/include/asm/xen/interface.h
+++ b/arch/x86/include/asm/xen/interface.h
@@ -61,9 +61,9 @@ DEFINE_GUEST_HANDLE(void);
#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
#endif
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
+#define MACH2PHYS_VIRT_START mk_unsigned_long(__MACH2PHYS_VIRT_START)
+#define MACH2PHYS_VIRT_END mk_unsigned_long(__MACH2PHYS_VIRT_END)
+#define MACH2PHYS_NR_ENTRIES ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>__MACH2PHYS_SHIFT)
/* Maximum number of virtual CPUs in multi-processor guests. */
#define MAX_VIRT_CPUS 32
diff --git a/arch/x86/include/asm/xen/interface_32.h b/arch/x86/include/asm/xen/interface_32.h
index 42a7e004ae5c..8413688b2571 100644
--- a/arch/x86/include/asm/xen/interface_32.h
+++ b/arch/x86/include/asm/xen/interface_32.h
@@ -32,6 +32,11 @@
/* And the trap vector is... */
#define TRAP_INSTR "int $0x82"
+#define __MACH2PHYS_VIRT_START 0xF5800000
+#define __MACH2PHYS_VIRT_END 0xF6800000
+
+#define __MACH2PHYS_SHIFT 2
+
/*
* Virtual addresses beyond this are not modifiable by guest OSes. The
* machine->physical mapping table starts at this address, read-only.
diff --git a/arch/x86/include/asm/xen/interface_64.h b/arch/x86/include/asm/xen/interface_64.h
index 100d2662b97c..839a4811cf98 100644
--- a/arch/x86/include/asm/xen/interface_64.h
+++ b/arch/x86/include/asm/xen/interface_64.h
@@ -39,18 +39,7 @@
#define __HYPERVISOR_VIRT_END 0xFFFF880000000000
#define __MACH2PHYS_VIRT_START 0xFFFF800000000000
#define __MACH2PHYS_VIRT_END 0xFFFF804000000000
-
-#ifndef HYPERVISOR_VIRT_START
-#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
-#define HYPERVISOR_VIRT_END mk_unsigned_long(__HYPERVISOR_VIRT_END)
-#endif
-
-#define MACH2PHYS_VIRT_START mk_unsigned_long(__MACH2PHYS_VIRT_START)
-#define MACH2PHYS_VIRT_END mk_unsigned_long(__MACH2PHYS_VIRT_END)
-#define MACH2PHYS_NR_ENTRIES ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
+#define __MACH2PHYS_SHIFT 3
/*
* int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index dd8c1414b3d5..8760cc60a21c 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -5,6 +5,7 @@
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/pfn.h>
+#include <linux/mm.h>
#include <asm/uaccess.h>
#include <asm/page.h>
@@ -35,6 +36,8 @@ typedef struct xpaddr {
#define MAX_DOMAIN_PAGES \
((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE))
+extern unsigned long *machine_to_phys_mapping;
+extern unsigned int machine_to_phys_order;
extern unsigned long get_phys_to_machine(unsigned long pfn);
extern bool set_phys_to_machine(unsigned long pfn, unsigned long mfn);
@@ -69,10 +72,8 @@ static inline unsigned long mfn_to_pfn(unsigned long mfn)
if (xen_feature(XENFEAT_auto_translated_physmap))
return mfn;
-#if 0
if (unlikely((mfn >> machine_to_phys_order) != 0))
- return max_mapnr;
-#endif
+ return ~0;
pfn = 0;
/*
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 850657d1b0ed..3f838d537392 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -52,7 +52,6 @@
#include <asm/mce.h>
#include <asm/kvm_para.h>
#include <asm/tsc.h>
-#include <asm/atomic.h>
unsigned int num_processors;
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index ed4118de249e..194539aea175 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -379,14 +379,14 @@ struct redir_addr {
#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
static __initdata struct redir_addr redir_addrs[] = {
- {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
- {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
- {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR},
};
static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
{
- union uvh_si_alias0_overlay_config_u alias;
+ union uvh_rh_gam_alias210_overlay_config_2_mmr_u alias;
union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
int i;
@@ -660,7 +660,7 @@ void uv_nmi_init(void)
void __init uv_system_init(void)
{
- union uvh_si_addr_map_config_u m_n_config;
+ union uvh_rh_gam_config_mmr_u m_n_config;
union uvh_node_id_u node_id;
unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
@@ -670,7 +670,7 @@ void __init uv_system_init(void)
map_low_mmrs();
- m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+ m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
m_val = m_n_config.s.m_skt;
n_val = m_n_config.s.n_skt;
mmr_base =
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 46d58448c3af..e421b8cd6944 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -280,11 +280,11 @@ static struct amd_nb *amd_alloc_nb(int cpu, int nb_id)
struct amd_nb *nb;
int i;
- nb = kmalloc(sizeof(struct amd_nb), GFP_KERNEL);
+ nb = kmalloc_node(sizeof(struct amd_nb), GFP_KERNEL | __GFP_ZERO,
+ cpu_to_node(cpu));
if (!nb)
return NULL;
- memset(nb, 0, sizeof(*nb));
nb->nb_id = nb_id;
/*
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 1b7b31ab7d86..212a6a42527c 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -33,7 +33,6 @@
#include <linux/init.h>
#include <linux/poll.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/device.h>
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index ec592caac4b4..cd21b654dec6 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -315,14 +315,18 @@ static void kgdb_remove_all_hw_break(void)
if (!breakinfo[i].enabled)
continue;
bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
- if (bp->attr.disabled == 1)
+ if (!bp->attr.disabled) {
+ arch_uninstall_hw_breakpoint(bp);
+ bp->attr.disabled = 1;
continue;
+ }
if (dbg_is_early)
early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
breakinfo[i].type);
- else
- arch_uninstall_hw_breakpoint(bp);
- bp->attr.disabled = 1;
+ else if (hw_break_release_slot(i))
+ printk(KERN_ERR "KGDB: hw bpt remove failed %lx\n",
+ breakinfo[i].addr);
+ breakinfo[i].enabled = 0;
}
}
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index e1af7c055c7d..ce0cb4721c9a 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -212,7 +212,7 @@ static int install_equiv_cpu_table(const u8 *buf)
return 0;
}
- equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
+ equiv_cpu_table = vmalloc(size);
if (!equiv_cpu_table) {
pr_err("failed to allocate equivalent CPU table\n");
return 0;
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index 71825806cd44..6da143c2a6b8 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -217,13 +217,13 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
wrmsrl(address, val);
}
-static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d)
+static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d)
{
pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
return 0;
}
-static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
+static const struct dmi_system_id __initconst mmconf_dmi_table[] = {
{
.callback = set_check_enable_amd_mmconf,
.ident = "Sun Microsystems Machine",
@@ -234,7 +234,8 @@ static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
{}
};
-void __cpuinit check_enable_amd_mmconf_dmi(void)
+/* Called from a __cpuinit function, but only on the BSP. */
+void __ref check_enable_amd_mmconf_dmi(void)
{
dmi_check_system(mmconf_dmi_table);
}
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 7bf2dc4c8f70..12fcbe2c143e 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -30,7 +30,6 @@
#include <linux/init.h>
#include <linux/poll.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/device.h>
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index bab3b9e6f66d..008b91eefa18 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -41,44 +41,6 @@ void pvclock_set_flags(u8 flags)
valid_flags = flags;
}
-/*
- * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
- * yielding a 64-bit result.
- */
-static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
-{
- u64 product;
-#ifdef __i386__
- u32 tmp1, tmp2;
-#endif
-
- if (shift < 0)
- delta >>= -shift;
- else
- delta <<= shift;
-
-#ifdef __i386__
- __asm__ (
- "mul %5 ; "
- "mov %4,%%eax ; "
- "mov %%edx,%4 ; "
- "mul %5 ; "
- "xor %5,%5 ; "
- "add %4,%%eax ; "
- "adc %5,%%edx ; "
- : "=A" (product), "=r" (tmp1), "=r" (tmp2)
- : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif defined(__x86_64__)
- __asm__ (
- "mul %%rdx ; shrd $32,%%rdx,%%rax"
- : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-#else
-#error implement me!
-#endif
-
- return product;
-}
-
static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow)
{
u64 delta = native_read_tsc() - shadow->tsc_timestamp;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 82e144a4e514..1ca12298ffc7 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -3395,6 +3395,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
load_host_msrs(vcpu);
+ kvm_load_ldt(ldt_selector);
loadsegment(fs, fs_selector);
#ifdef CONFIG_X86_64
load_gs_index(gs_selector);
@@ -3402,7 +3403,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
#else
loadsegment(gs, gs_selector);
#endif
- kvm_load_ldt(ldt_selector);
reload_tss(vcpu);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 8da0e45ff7c9..ff21fdda0c53 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -821,10 +821,9 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
#endif
#ifdef CONFIG_X86_64
- if (is_long_mode(&vmx->vcpu)) {
- rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+ rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+ if (is_long_mode(&vmx->vcpu))
wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
- }
#endif
for (i = 0; i < vmx->save_nmsrs; ++i)
kvm_set_shared_msr(vmx->guest_msrs[i].index,
@@ -839,23 +838,23 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
++vmx->vcpu.stat.host_state_reload;
vmx->host_state.loaded = 0;
- if (vmx->host_state.fs_reload_needed)
- loadsegment(fs, vmx->host_state.fs_sel);
+#ifdef CONFIG_X86_64
+ if (is_long_mode(&vmx->vcpu))
+ rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
+#endif
if (vmx->host_state.gs_ldt_reload_needed) {
kvm_load_ldt(vmx->host_state.ldt_sel);
#ifdef CONFIG_X86_64
load_gs_index(vmx->host_state.gs_sel);
- wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs);
#else
loadsegment(gs, vmx->host_state.gs_sel);
#endif
}
+ if (vmx->host_state.fs_reload_needed)
+ loadsegment(fs, vmx->host_state.fs_sel);
reload_tss();
#ifdef CONFIG_X86_64
- if (is_long_mode(&vmx->vcpu)) {
- rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
- wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
- }
+ wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
#endif
if (current_thread_info()->status & TS_USEDFPU)
clts();
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 49358481c733..12cdbb17ad18 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -251,7 +251,7 @@ static void __cpuinit calculate_tlb_offset(void)
}
}
-static int tlb_cpuhp_notify(struct notifier_block *n,
+static int __cpuinit tlb_cpuhp_notify(struct notifier_block *n,
unsigned long action, void *hcpu)
{
switch (action & 0xf) {
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 15466c096ba5..0972315c3860 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -138,7 +138,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
struct acpi_resource_address64 addr;
acpi_status status;
unsigned long flags;
- struct resource *root, *conflict;
u64 start, end;
status = resource_to_addr(acpi_res, &addr);
@@ -146,12 +145,10 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
return AE_OK;
if (addr.resource_type == ACPI_MEMORY_RANGE) {
- root = &iomem_resource;
flags = IORESOURCE_MEM;
if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
flags |= IORESOURCE_PREFETCH;
} else if (addr.resource_type == ACPI_IO_RANGE) {
- root = &ioport_resource;
flags = IORESOURCE_IO;
} else
return AE_OK;
@@ -172,25 +169,90 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
return AE_OK;
}
- conflict = insert_resource_conflict(root, res);
- if (conflict) {
- dev_err(&info->bridge->dev,
- "address space collision: host bridge window %pR "
- "conflicts with %s %pR\n",
- res, conflict->name, conflict);
- } else {
- pci_bus_add_resource(info->bus, res, 0);
- info->res_num++;
- if (addr.translation_offset)
- dev_info(&info->bridge->dev, "host bridge window %pR "
- "(PCI address [%#llx-%#llx])\n",
- res, res->start - addr.translation_offset,
- res->end - addr.translation_offset);
+ info->res_num++;
+ if (addr.translation_offset)
+ dev_info(&info->bridge->dev, "host bridge window %pR "
+ "(PCI address [%#llx-%#llx])\n",
+ res, res->start - addr.translation_offset,
+ res->end - addr.translation_offset);
+ else
+ dev_info(&info->bridge->dev, "host bridge window %pR\n", res);
+
+ return AE_OK;
+}
+
+static bool resource_contains(struct resource *res, resource_size_t point)
+{
+ if (res->start <= point && point <= res->end)
+ return true;
+ return false;
+}
+
+static void coalesce_windows(struct pci_root_info *info, int type)
+{
+ int i, j;
+ struct resource *res1, *res2;
+
+ for (i = 0; i < info->res_num; i++) {
+ res1 = &info->res[i];
+ if (!(res1->flags & type))
+ continue;
+
+ for (j = i + 1; j < info->res_num; j++) {
+ res2 = &info->res[j];
+ if (!(res2->flags & type))
+ continue;
+
+ /*
+ * I don't like throwing away windows because then
+ * our resources no longer match the ACPI _CRS, but
+ * the kernel resource tree doesn't allow overlaps.
+ */
+ if (resource_contains(res1, res2->start) ||
+ resource_contains(res1, res2->end) ||
+ resource_contains(res2, res1->start) ||
+ resource_contains(res2, res1->end)) {
+ res1->start = min(res1->start, res2->start);
+ res1->end = max(res1->end, res2->end);
+ dev_info(&info->bridge->dev,
+ "host bridge window expanded to %pR; %pR ignored\n",
+ res1, res2);
+ res2->flags = 0;
+ }
+ }
+ }
+}
+
+static void add_resources(struct pci_root_info *info)
+{
+ int i;
+ struct resource *res, *root, *conflict;
+
+ if (!pci_use_crs)
+ return;
+
+ coalesce_windows(info, IORESOURCE_MEM);
+ coalesce_windows(info, IORESOURCE_IO);
+
+ for (i = 0; i < info->res_num; i++) {
+ res = &info->res[i];
+
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+ else if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
else
- dev_info(&info->bridge->dev,
- "host bridge window %pR\n", res);
+ continue;
+
+ conflict = insert_resource_conflict(root, res);
+ if (conflict)
+ dev_err(&info->bridge->dev,
+ "address space collision: host bridge window %pR "
+ "conflicts with %s %pR\n",
+ res, conflict->name, conflict);
+ else
+ pci_bus_add_resource(info->bus, res, 0);
}
- return AE_OK;
}
static void
@@ -224,6 +286,7 @@ get_current_resources(struct acpi_device *device, int busnum,
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
+ add_resources(&info);
return;
name_alloc_fail:
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 117f5b8daf75..d7b5109f7a9c 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -147,8 +147,10 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
irq = xen_allocate_pirq(v[i], 0, /* not sharable */
(type == PCI_CAP_ID_MSIX) ?
"pcifront-msi-x" : "pcifront-msi");
- if (irq < 0)
- return -1;
+ if (irq < 0) {
+ ret = -1;
+ goto free;
+ }
ret = set_irq_msi(irq, msidesc);
if (ret)
@@ -164,7 +166,7 @@ error:
if (ret == -ENODEV)
dev_err(&dev->dev, "Xen PCI frontend has not registered" \
" MSI/MSI-X support!\n");
-
+free:
kfree(v);
return ret;
}
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 20ea20a39e2a..a318194002b5 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1343,8 +1343,8 @@ uv_activation_descriptor_init(int node, int pnode)
* each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
* per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub
*/
- bau_desc = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
- UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
+ bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE
+ * UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
BUG_ON(!bau_desc);
pa = uv_gpa(bau_desc); /* need the real nasid*/
@@ -1402,9 +1402,9 @@ uv_payload_queue_init(int node, int pnode)
struct bau_payload_queue_entry *pqp_malloc;
struct bau_control *bcp;
- pqp = (struct bau_payload_queue_entry *) kmalloc_node(
- (DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry),
- GFP_KERNEL, node);
+ pqp = kmalloc_node((DEST_Q_SIZE + 1)
+ * sizeof(struct bau_payload_queue_entry),
+ GFP_KERNEL, node);
BUG_ON(!pqp);
pqp_malloc = pqp;
@@ -1520,8 +1520,7 @@ static void __init uv_init_per_cpu(int nuvhubs)
timeout_us = calculate_destination_timeout();
- uvhub_descs = (struct uvhub_desc *)
- kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
+ uvhub_descs = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc));
uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
for_each_present_cpu(cpu) {
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 235c0f4d3861..02c710bebf7a 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -75,6 +75,11 @@ DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
enum xen_domain_type xen_domain_type = XEN_NATIVE;
EXPORT_SYMBOL_GPL(xen_domain_type);
+unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START;
+EXPORT_SYMBOL(machine_to_phys_mapping);
+unsigned int machine_to_phys_order;
+EXPORT_SYMBOL(machine_to_phys_order);
+
struct start_info *xen_start_info;
EXPORT_SYMBOL_GPL(xen_start_info);
@@ -1090,6 +1095,8 @@ static void __init xen_setup_stackprotector(void)
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
+ struct physdev_set_iopl set_iopl;
+ int rc;
pgd_t *pgd;
if (!xen_start_info)
@@ -1097,6 +1104,8 @@ asmlinkage void __init xen_start_kernel(void)
xen_domain_type = XEN_PV_DOMAIN;
+ xen_setup_machphys_mapping();
+
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
@@ -1191,8 +1200,6 @@ asmlinkage void __init xen_start_kernel(void)
/* Allocate and initialize top and mid mfn levels for p2m structure */
xen_build_mfn_list_list();
- init_mm.pgd = pgd;
-
/* keep using Xen gdt for now; no urgent need to change it */
#ifdef CONFIG_X86_32
@@ -1202,10 +1209,18 @@ asmlinkage void __init xen_start_kernel(void)
#else
pv_info.kernel_rpl = 0;
#endif
-
/* set the limit of our address space */
xen_reserve_top();
+ /* We used to do this in xen_arch_setup, but that is too late on AMD
+ * were early_cpu_init (run before ->arch_setup()) calls early_amd_init
+ * which pokes 0xcf8 port.
+ */
+ set_iopl.iopl = 1;
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
+ if (rc != 0)
+ xen_raw_printk("physdev_op failed %d\n", rc);
+
#ifdef CONFIG_X86_32
/* set up basic CPUID stuff */
cpu_detect(&new_cpu_data);
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index c237b810b03f..a1feff9e59b6 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -2034,6 +2034,20 @@ static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
set_page_prot(pmd, PAGE_KERNEL_RO);
}
+void __init xen_setup_machphys_mapping(void)
+{
+ struct xen_machphys_mapping mapping;
+ unsigned long machine_to_phys_nr_ents;
+
+ if (HYPERVISOR_memory_op(XENMEM_machphys_mapping, &mapping) == 0) {
+ machine_to_phys_mapping = (unsigned long *)mapping.v_start;
+ machine_to_phys_nr_ents = mapping.max_mfn + 1;
+ } else {
+ machine_to_phys_nr_ents = MACH2PHYS_NR_ENTRIES;
+ }
+ machine_to_phys_order = fls(machine_to_phys_nr_ents - 1);
+}
+
#ifdef CONFIG_X86_64
static void convert_pfn_mfn(void *v)
{
@@ -2119,44 +2133,83 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
return pgd;
}
#else /* !CONFIG_X86_64 */
-static RESERVE_BRK_ARRAY(pmd_t, level2_kernel_pgt, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD);
+
+static __init void xen_write_cr3_init(unsigned long cr3)
+{
+ unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir));
+
+ BUG_ON(read_cr3() != __pa(initial_page_table));
+ BUG_ON(cr3 != __pa(swapper_pg_dir));
+
+ /*
+ * We are switching to swapper_pg_dir for the first time (from
+ * initial_page_table) and therefore need to mark that page
+ * read-only and then pin it.
+ *
+ * Xen disallows sharing of kernel PMDs for PAE
+ * guests. Therefore we must copy the kernel PMD from
+ * initial_page_table into a new kernel PMD to be used in
+ * swapper_pg_dir.
+ */
+ swapper_kernel_pmd =
+ extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
+ memcpy(swapper_kernel_pmd, initial_kernel_pmd,
+ sizeof(pmd_t) * PTRS_PER_PMD);
+ swapper_pg_dir[KERNEL_PGD_BOUNDARY] =
+ __pgd(__pa(swapper_kernel_pmd) | _PAGE_PRESENT);
+ set_page_prot(swapper_kernel_pmd, PAGE_KERNEL_RO);
+
+ set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+ xen_write_cr3(cr3);
+ pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, pfn);
+
+ pin_pagetable_pfn(MMUEXT_UNPIN_TABLE,
+ PFN_DOWN(__pa(initial_page_table)));
+ set_page_prot(initial_page_table, PAGE_KERNEL);
+ set_page_prot(initial_kernel_pmd, PAGE_KERNEL);
+
+ pv_mmu_ops.write_cr3 = &xen_write_cr3;
+}
__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
unsigned long max_pfn)
{
pmd_t *kernel_pmd;
- level2_kernel_pgt = extend_brk(sizeof(pmd_t *) * PTRS_PER_PMD, PAGE_SIZE);
+ initial_kernel_pmd =
+ extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
xen_start_info->nr_pt_frames * PAGE_SIZE +
512*1024);
kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
- memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+ memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
- xen_map_identity_early(level2_kernel_pgt, max_pfn);
+ xen_map_identity_early(initial_kernel_pmd, max_pfn);
- memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
- set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
- __pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+ memcpy(initial_page_table, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+ initial_page_table[KERNEL_PGD_BOUNDARY] =
+ __pgd(__pa(initial_kernel_pmd) | _PAGE_PRESENT);
- set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
- set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+ set_page_prot(initial_kernel_pmd, PAGE_KERNEL_RO);
+ set_page_prot(initial_page_table, PAGE_KERNEL_RO);
set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
- xen_write_cr3(__pa(swapper_pg_dir));
-
- pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+ pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE,
+ PFN_DOWN(__pa(initial_page_table)));
+ xen_write_cr3(__pa(initial_page_table));
memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
__pa(xen_start_info->pt_base +
xen_start_info->nr_pt_frames * PAGE_SIZE),
"XEN PAGETABLES");
- return swapper_pg_dir;
+ return initial_page_table;
}
#endif /* CONFIG_X86_64 */
@@ -2290,7 +2343,11 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
.write_cr2 = xen_write_cr2,
.read_cr3 = xen_read_cr3,
+#ifdef CONFIG_X86_32
+ .write_cr3 = xen_write_cr3_init,
+#else
.write_cr3 = xen_write_cr3,
+#endif
.flush_tlb_user = xen_flush_tlb,
.flush_tlb_kernel = xen_flush_tlb,
@@ -2627,7 +2684,8 @@ int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
prot = __pgprot(pgprot_val(prot) | _PAGE_IOMAP);
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+ BUG_ON(!((vma->vm_flags & (VM_PFNMAP | VM_RESERVED | VM_IO)) ==
+ (VM_PFNMAP | VM_RESERVED | VM_IO)));
rmd.mfn = mfn;
rmd.prot = prot;
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index b1dbdaa23ecc..01afd8a94607 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -23,7 +23,6 @@
#include <xen/interface/callback.h>
#include <xen/interface/memory.h>
#include <xen/interface/physdev.h>
-#include <xen/interface/memory.h>
#include <xen/features.h>
#include "xen-ops.h"
@@ -118,16 +117,18 @@ static unsigned long __init xen_return_unused_memory(unsigned long max_pfn,
const struct e820map *e820)
{
phys_addr_t max_addr = PFN_PHYS(max_pfn);
- phys_addr_t last_end = 0;
+ phys_addr_t last_end = ISA_END_ADDRESS;
unsigned long released = 0;
int i;
+ /* Free any unused memory above the low 1Mbyte. */
for (i = 0; i < e820->nr_map && last_end < max_addr; i++) {
phys_addr_t end = e820->map[i].addr;
end = min(max_addr, end);
- released += xen_release_chunk(last_end, end);
- last_end = e820->map[i].addr + e820->map[i].size;
+ if (last_end < end)
+ released += xen_release_chunk(last_end, end);
+ last_end = max(last_end, e820->map[i].addr + e820->map[i].size);
}
if (last_end < max_addr)
@@ -164,6 +165,7 @@ char * __init xen_memory_setup(void)
XENMEM_memory_map;
rc = HYPERVISOR_memory_op(op, &memmap);
if (rc == -ENOSYS) {
+ BUG_ON(xen_initial_domain());
memmap.nr_entries = 1;
map[0].addr = 0ULL;
map[0].size = mem_end;
@@ -201,12 +203,13 @@ char * __init xen_memory_setup(void)
}
/*
- * Even though this is normal, usable memory under Xen, reserve
- * ISA memory anyway because too many things think they can poke
+ * In domU, the ISA region is normal, usable memory, but we
+ * reserve ISA memory anyway because too many things poke
* about in there.
*
- * In a dom0 kernel, this region is identity mapped with the
- * hardware ISA area, so it really is out of bounds.
+ * In Dom0, the host E820 information can leave gaps in the
+ * ISA range, which would cause us to release those pages. To
+ * avoid this, we unconditionally reserve them here.
*/
e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
E820_RESERVED);
@@ -244,8 +247,7 @@ char * __init xen_memory_setup(void)
else
extra_pages = 0;
- if (!xen_initial_domain())
- xen_add_extra_mem(extra_pages);
+ xen_add_extra_mem(extra_pages);
return "Xen";
}
@@ -333,9 +335,6 @@ void __cpuinit xen_enable_syscall(void)
void __init xen_arch_setup(void)
{
- struct physdev_set_iopl set_iopl;
- int rc;
-
xen_panic_handler_init();
HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
@@ -352,11 +351,6 @@ void __init xen_arch_setup(void)
xen_enable_sysenter();
xen_enable_syscall();
- set_iopl.iopl = 1;
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
- if (rc != 0)
- printk(KERN_INFO "physdev_op failed %d\n", rc);
-
#ifdef CONFIG_ACPI
if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
printk(KERN_INFO "ACPI in unprivileged domain disabled\n");