1382 files changed, 49404 insertions, 15399 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index e3511afbb7f2..205fd23e0cad 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -465,6 +465,38 @@ config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 	  irqs disabled over activate_mm. Architectures that do IPI based TLB
 	  shootdowns should enable this.
 
+# Use normal mm refcounting for MMU_LAZY_TLB kernel thread references.
+# MMU_LAZY_TLB_REFCOUNT=n can improve the scalability of context switching
+# to/from kernel threads when the same mm is running on a lot of CPUs (a large
+# multi-threaded application), by reducing contention on the mm refcount.
+#
+# This can be disabled if the architecture ensures no CPUs are using an mm as a
+# "lazy tlb" beyond its final refcount (i.e., by the time __mmdrop frees the mm
+# or its kernel page tables). This could be arranged by arch_exit_mmap(), or
+# final exit(2) TLB flush, for example.
+#
+# To implement this, an arch *must*:
+# Ensure the _lazy_tlb variants of mmgrab/mmdrop are used when manipulating
+# the lazy tlb reference of a kthread's ->active_mm (non-arch code has been
+# converted already).
+config MMU_LAZY_TLB_REFCOUNT
+	def_bool y
+	depends on !MMU_LAZY_TLB_SHOOTDOWN
+
+# This option allows MMU_LAZY_TLB_REFCOUNT=n. It ensures no CPUs are using an
+# mm as a lazy tlb beyond its last reference count, by shooting down these
+# users before the mm is deallocated. __mmdrop() first IPIs all CPUs that may
+# be using the mm as a lazy tlb, so that they may switch themselves to using
+# init_mm for their active mm. mm_cpumask(mm) is used to determine which CPUs
+# may be using mm as a lazy tlb mm.
+#
+# To implement this, an arch *must*:
+# - At the time of the final mmdrop of the mm, ensure mm_cpumask(mm) contains
+#   at least all possible CPUs in which the mm is lazy.
+# - It must meet the requirements for MMU_LAZY_TLB_REFCOUNT=n (see above).
+config MMU_LAZY_TLB_SHOOTDOWN
+	bool
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 780d4673c3ca..a5c2b1aa46b0 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -27,6 +27,7 @@ config ALPHA
 	select AUDIT_ARCH
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_SMP_IDLE_THREAD
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 64fbfb0763b2..4458eb7f44f0 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -288,11 +288,10 @@ pcibios_claim_one_bus(struct pci_bus *b)
 	struct pci_bus *child_bus;
 
 	list_for_each_entry(dev, &b->devices, bus_list) {
+		struct resource *r;
 		int i;
 
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			struct resource *r = &dev->resource[i];
-
+		pci_dev_for_each_resource(dev, r, i) {
 			if (r->parent || !r->start || !r->flags)
 				continue;
 			if (pci_has_flag(PCI_PROBE_ONLY) ||
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index e9cf7193eb81..582d96548385 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -9,6 +9,7 @@
  * This file handles the architecture-dependent parts of process handling.
  */
 
+#include <linux/cpu.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -59,9 +60,10 @@ void arch_cpu_idle(void)
 	wtint(0);
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	wtint(INT_MAX);
+	BUG();
 }
 #endif /* ALPHA_WTINT */
 
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index d9a13ccf89a3..ab6d701365bb 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -556,7 +556,7 @@ endmenu	 # "ARC Architecture Configuration"
 
 config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
-	default "12" if ARC_HUGEPAGE_16M
-	default "11"
+	default "11" if ARC_HUGEPAGE_16M
+	default "10"
 
 source "kernel/power/Kconfig"
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index 200270a94558..9270d0a713c3 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -369,6 +369,8 @@ void *unwind_add_table(struct module *module, const void *table_start,
 		       unsigned long table_size)
 {
 	struct unwind_table *table;
+	struct module_memory *core_text;
+	struct module_memory *init_text;
 
 	if (table_size <= 0)
 		return NULL;
@@ -377,11 +379,11 @@ void *unwind_add_table(struct module *module, const void *table_start,
 	if (!table)
 		return NULL;
 
-	init_unwind_table(table, module->name,
-			  module->core_layout.base, module->core_layout.size,
-			  module->init_layout.base, module->init_layout.size,
-			  table_start, table_size,
-			  NULL, 0);
+	core_text = &module->mem[MOD_TEXT];
+	init_text = &module->mem[MOD_INIT_TEXT];
+
+	init_unwind_table(table, module->name, core_text->base, core_text->size,
+			  init_text->base, init_text->size, table_start, table_size, NULL, 0);
 
 	init_unwind_hdr(table, unw_hdr_alloc);
 
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index ce4e939a7f07..2b89b6c53801 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -74,11 +74,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 		base, TO_MB(size), !in_use ? "Not used":"");
 }
 
-bool arch_has_descending_max_zone_pfns(void)
-{
-	return !IS_ENABLED(CONFIG_ARC_HAS_PAE40);
-}
-
 /*
  * First memory setup routine called from setup_arch()
  * 1. setup swapper's mm @init_mm
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e24a9820e12f..0fb4b218f665 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -24,7 +24,6 @@ config ARM
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_KEEP_MEMBLOCK
@@ -70,6 +69,7 @@ config ARM
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
@@ -497,8 +497,6 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-oxnas/Kconfig"
-
 source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
@@ -986,7 +984,7 @@ config SMP
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
 	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
@@ -1354,20 +1352,19 @@ config ARM_MODULE_PLTS
 	  configurations. If unsure, say y.
 
 config ARCH_FORCE_MAX_ORDER
-	int "Maximum zone order"
-	default "12" if SOC_AM33XX
-	default "9" if SA1111
-	default "11"
-	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
-
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	int "Order of maximal physically contiguous allocations"
+	default "11" if SOC_AM33XX
+	default "8" if SA1111
+	default "10"
+	help
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
+
+	  Don't change if unsure.
 
 config ALIGNMENT_TRAP
 	def_bool CPU_CP15_MMU
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 485a439e22ca..547e5856eaa0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -203,7 +203,6 @@ machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
-machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 2ef651a78fa2..726ecabcef09 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -107,7 +107,7 @@ ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
+KBSS_SZ = $(shell echo $$(($$($(NM) vmlinux | \
 		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
 		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index 74255e819831..0669851394f0 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -31,6 +31,7 @@
 /* Not needed, but used in some headers pulled in by decompressors */
 extern char * strstr(const char * s1, const char *s2);
 extern size_t strlen(const char *s);
+extern int strcmp(const char *cs, const char *ct);
 extern int memcmp(const void *cs, const void *ct, size_t count);
 extern char * strchrnul(const char *, int);
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index efe4152e5846..59829fc90315 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -561,7 +561,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-wandboard-revd1.dtb \
 	imx6dl-yapp4-draco.dtb \
 	imx6dl-yapp4-hydra.dtb \
+	imx6dl-yapp4-lynx.dtb \
 	imx6dl-yapp4-orion.dtb \
+	imx6dl-yapp4-phoenix.dtb \
 	imx6dl-yapp4-ursa.dtb \
 	imx6q-apalis-eval.dtb \
 	imx6q-apalis-ixora.dtb \
@@ -668,6 +670,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-wandboard-revb1.dtb \
 	imx6q-wandboard-revd1.dtb \
 	imx6q-yapp4-crux.dtb \
+	imx6q-yapp4-pegasus.dtb \
 	imx6q-zii-rdu2.dtb \
 	imx6qp-mba6b.dtb \
 	imx6qp-nitrogen6_max.dtb \
@@ -683,6 +686,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6qp-vicutp.dtb \
 	imx6qp-wandboard-revd1.dtb \
 	imx6qp-yapp4-crux-plus.dtb \
+	imx6qp-yapp4-pegasus-plus.dtb \
 	imx6qp-zii-rdu2.dtb \
 	imx6s-dhcom-drc02.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
@@ -690,6 +694,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-kobo-aura2.dtb \
 	imx6sl-tolino-shine2hd.dtb \
 	imx6sl-tolino-shine3.dtb \
+	imx6sl-tolino-vision.dtb \
 	imx6sl-tolino-vision5.dtb \
 	imx6sl-warp.dtb
 dtb-$(CONFIG_SOC_IMX6SLL) += \
@@ -755,6 +760,10 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ull-phytec-segin-lc-rdk-nand.dtb \
 	imx6ull-phytec-tauri-emmc.dtb \
 	imx6ull-phytec-tauri-nand.dtb \
+	imx6ull-tarragon-master.dtb \
+	imx6ull-tarragon-micro.dtb \
+	imx6ull-tarragon-slave.dtb \
+	imx6ull-tarragon-slavext.dtb \
 	imx6ull-tqma6ull2-mba6ulx.dtb \
 	imx6ull-tqma6ull2l-mba6ulx.dtb \
 	imx6ulz-14x14-evk.dtb \
@@ -994,16 +1003,24 @@ dtb-$(CONFIG_SOC_OMAP5) += \
 	omap5-igep0050.dtb \
 	omap5-sbc-t54.dtb \
 	omap5-uevm.dtb
+am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo
+am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo
 dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
 	am57xx-beagle-x15-revb1.dtb \
 	am57xx-beagle-x15-revc.dtb \
+	am57xx-evm.dtb \
+	am57xx-evm-reva3.dtb \
 	am5729-beagleboneai.dtb \
 	am57xx-cl-som-am57x.dtb \
 	am57xx-sbc-am57x.dtb \
 	am572x-idk.dtb \
+	am572x-idk-touchscreen.dtbo \
 	am571x-idk.dtb \
+	am571x-idk-touchscreen.dtbo \
 	am574x-idk.dtb \
+	am57xx-idk-lcd-osd101t2045.dtbo \
+	am57xx-idk-lcd-osd101t2587.dtbo \
 	dra7-evm.dtb \
 	dra72-evm.dtb \
 	dra72-evm-revc.dtb \
@@ -1033,9 +1050,6 @@ dtb-$(CONFIG_ARCH_PXA) += \
 	pxa300-raumfeld-speaker-m.dtb \
 	pxa300-raumfeld-speaker-one.dtb \
 	pxa300-raumfeld-speaker-s.dtb
-dtb-$(CONFIG_ARCH_OXNAS) += \
-	ox810se-wd-mbwe.dtb \
-	ox820-cloudengines-pogoplug-series-3.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8016-sbc.dtb \
 	qcom-apq8026-asus-sparrow.dtb \
@@ -1397,6 +1411,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-s3-elimo-initium.dtb \
 	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-s3-pinecube.dtb \
+	sun8i-t113s-mangopi-mq-r-t113.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
 	sun8i-v3-sl631-imx179.dtb \
 	sun8i-v3s-licheepi-zero.dtb \
@@ -1406,7 +1421,9 @@ dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
 dtb-$(CONFIG_MACH_SUNIV) += \
-	suniv-f1c100s-licheepi-nano.dtb
+	suniv-f1c100s-licheepi-nano.dtb \
+	suniv-f1c200s-lctech-pi.dtb \
+	suniv-f1c200s-popstick-v1.1.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-acer-a500-picasso.dtb \
 	tegra20-asus-tf101.dtb \
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 947497413977..67c7fcc52ce6 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -29,25 +29,23 @@
 	};
 
 	/* User IO */
-	user_leds: user_leds {
+	user_leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_pins>;
 
 		user-led0 {
 			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
 			default-state = "on";
 		};
 
 		user-led1 {
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "gpio";
 			default-state = "on";
 		};
 	};
 
-	user_buttons: user_buttons {
+	user_buttons: user-buttons {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_buttons_pins>;
@@ -70,14 +68,14 @@
 };
 
 &am33xx_pinmux {
-	user_buttons_pins: pinmux_user_buttons {
+	user_buttons_pins: pinmux-user-buttons {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu0.gpio3_7 */
 			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu1.gpio3_8 */
 		>;
 	};
 
-	user_leds_pins: pinmux_user_leds {
+	user_leds_pins: pinmux-user-leds {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn1.gpio1_30 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn2.gpio1_31 */
@@ -87,7 +85,7 @@
 
 /* CAN */
 &am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
+	dcan1_pins: pinmux-dcan1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart1_rxd.dcan1_tx_mux2 */
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart1_txd.dcan1_rx_mux2 */
@@ -144,7 +142,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&cb_gpio_pins>;
 
-	cb_gpio_pins: pinmux_cb_gpio {
+	cb_gpio_pins: pinmux-cb-gpio {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_ctsn.gpio1_8 */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_rtsn.gpio1_9 */
@@ -154,7 +152,7 @@
 
 /* MMC */
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: pinmux-mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -178,14 +176,14 @@
 
 /* UARTs */
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: pinmux-uart0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1 {
+	uart1_pins: pinmux-uart1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
@@ -194,14 +192,14 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2 {
+	uart2_pins: pinmux-uart2 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3 {
+	uart3_pins: pinmux-uart3 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd3.uart3_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rxd2.uart3_txd */
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index e2cec1ffaa4c..034dc5181679 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -14,6 +14,7 @@
 	aliases {
 		rtc0 = &i2c_rtc;
 		rtc1 = &rtc;
+		rtc2 = &tps;
 	};
 
 	cpus {
@@ -48,7 +49,7 @@
 
 /* EMMC */
 &am33xx_pinmux {
-	emmc_pins: pinmux_emmc_pins {
+	emmc_pins: pinmux-emmc-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
@@ -124,7 +125,7 @@
 
 /* I2C Busses */
 &am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0 {
+	i2c0_pins: pinmux-i2c0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
@@ -164,7 +165,7 @@
 
 /* NAND memory */
 &am33xx_pinmux {
-		nandflash_pins: pinmux_nandflash {
+		nandflash_pins: pinmux-nandflash {
 			pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -202,7 +203,6 @@
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		gpmc,device-nand = "true";
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
@@ -316,7 +316,7 @@
 
 /* SPI Busses */
 &am33xx_pinmux {
-	spi0_pins: pinmux_spi0 {
+	spi0_pins: pinmux-spi0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0)
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
index 7b3966ee51b9..3894f14a914c 100644
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -18,7 +18,7 @@
 	};
 
 	/* User IO */
-	user_leds: user_leds {
+	user_leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_pins>;
@@ -39,7 +39,7 @@
 
 /* User Leds */
 &am33xx_pinmux {
-	user_leds_pins: pinmux_user_leds {
+	user_leds_pins: pinmux-user-leds {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_22 */
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_fsx.gpio3_15 */
@@ -49,7 +49,7 @@
 
 /* CAN Busses */
 &am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
+	dcan1_pins: pinmux-dcan1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart0_ctsn.d_can1_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart0_rtsn.d_can1_rx */
@@ -65,7 +65,7 @@
 
 /* Ethernet */
 &am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
+	ethernet1_pins: pinmux-ethernet1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
@@ -108,7 +108,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&user_gpios_pins>;
 
-	user_gpios_pins: pinmux_user_gpios {
+	user_gpios_pins: pinmux-user-gpios {
 		pinctrl-single,pins = <
 			/* DIGIN 1-4 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7)		/* gpmc_ad11.gpio0_27 */
@@ -126,7 +126,7 @@
 
 /* MMC */
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1 {
+	mmc1_pins: pinmux-mmc1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -155,14 +155,14 @@
 
 /* UARTs */
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: pinmux-uart0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart2_pins: pinmux_uart2 {
+	uart2_pins: pinmux-uart2 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
@@ -184,7 +184,7 @@
 
 /* RS485 - UART1 */
 &am33xx_pinmux {
-	uart1_rs485_pins: pinmux_uart1_rs485_pins {
+	uart1_rs485_pins: pinmux-uart1-rs485-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index f957fea8208e..6a103f17585b 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -8,8 +8,34 @@
 	model = "Phytec AM335x phyBOARD-WEGA";
 	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
 
-	sound: sound_iface {
-		compatible = "ti,da830-evm-audio";
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "snd-wega";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_iface_main>;
+		simple-audio-card,frame-master = <&sound_iface_main>;
+		simple-audio-card,mclk-fs = <32>;
+		simple-audio-card,widgets =
+					"Line", "Line In",
+					"Line", "Line Out",
+					"Speaker", "Speaker";
+		simple-audio-card,routing =
+					"Line Out", "LLOUT",
+					"Line Out", "RLOUT",
+					"Speaker", "SPOP",
+					"Speaker", "SPOM",
+					"LINE1L", "Line In",
+					"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+
+		sound_iface_main: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3007>;
+			clocks = <&mcasp0_fck>;
+		};
+
 	};
 
 	vcc3v3: fixedregulator1 {
@@ -23,7 +49,7 @@
 
 /* Audio */
 &am33xx_pinmux {
-	mcasp0_pins: pinmux_mcasp0 {
+	mcasp0_pins: pinmux-mcasp0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -36,6 +62,7 @@
 
 &i2c0 {
 	tlv320aic3007: tlv320aic3007@18 {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3007";
 		reg = <0x18>;
 		AVDD-supply = <&vcc3v3>;
@@ -47,6 +74,7 @@
 };
 
 &mcasp0 {
+	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcasp0_pins>;
 	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
@@ -59,23 +87,10 @@
 	status = "okay";
 };
 
-&sound {
-	ti,model = "AM335x-Wega";
-	ti,audio-codec = <&tlv320aic3007>;
-	ti,mcasp-controller = <&mcasp0>;
-	ti,audio-routing =
-		"Line Out",		"LLOUT",
-		"Line Out",		"RLOUT",
-		"LINE1L",		"Line In",
-		"LINE1R",		"Line In";
-	clocks = <&mcasp0_fck>;
-	clock-names = "mclk";
-	status = "okay";
-};
 
 /* CAN Busses */
 &am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
+	dcan1_pins: pinmux-dcan1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
@@ -91,7 +106,7 @@
 
 /* Ethernet */
 &am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
+	ethernet1_pins: pinmux-ethernet1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
@@ -131,7 +146,7 @@
 
 /* MMC */
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1 {
+	mmc1_pins: pinmux-mmc1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -161,14 +176,14 @@
 
 /* UARTs */
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: pinmux-uart0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: pinmux-uart1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
diff --git a/arch/arm/boot/dts/am571x-idk-touchscreen.dtso b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso
new file mode 100644
index 000000000000..c051ee6c1130
--- /dev/null
+++ b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen: edt-ft5506@38 {
+		compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
+
+		reg = <0x38>;
+
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+		/* GPIO line is inverted before going to touch panel */
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1920>;
+		touchscreen-size-y = <1200>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/am572x-idk-touchscreen.dtso b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso
new file mode 100644
index 000000000000..573e932b1239
--- /dev/null
+++ b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen: edt-ft5506@38 {
+		compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
+
+		reg = <0x38>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+		/* GPIO line is inverted before going to touch panel */
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1920>;
+		touchscreen-size-y = <1200>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-evm.dtso b/arch/arm/boot/dts/am57xx-evm.dtso
new file mode 100644
index 000000000000..12385a31061e
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-evm.dtso
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DT overlay for AM57xx GP EVM boards
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&{/} {
+	compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+	model = "TI AM5728 EVM";
+
+	aliases {
+		display0 = "/display";
+		display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be
+					 // resolved here correcly based on
+					 // information in the base dtb symbol
+					 // table with a fix in dtc
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user1 {
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			label = "USER1";
+			linux,code = <BTN_1>;
+		};
+
+		button-user2 {
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+			label = "USER2";
+			linux,code = <BTN_2>;
+		};
+
+		button-user3 {
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			label = "USER3";
+			linux,code = <BTN_3>;
+		};
+
+		button-user4 {
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			label = "USER4";
+			linux,code = <BTN_4>;
+		};
+
+		button-user5 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+			label = "USER5";
+			linux,code = <BTN_5>;
+		};
+	};
+
+	lcd0: display {
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
+		backlight = <&lcd_bl>;
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		label = "lcd";
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 243 245 247 249 251 252 253 255>;
+		default-brightness-level = <8>;
+		pwms = <&ehrpwm1 0 50000 0>;
+	};
+};
+
+&ehrpwm1 {
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x5c>;
+		reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&dss {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			dpi_out: endpoint {
+				data-lines = <24>;
+				remote-endpoint = <&lcd_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso
new file mode 100644
index 000000000000..25d74e9f3c9e
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	aliases {
+		display0 = "/display";
+		display1 = "/connector";
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 1>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dsi_bridge {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	lcd: display {
+		compatible = "osddisplays,osd101t2045-53ts";
+		reg = <0>;
+
+		label = "lcd";
+
+		backlight = <&lcd_bl>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_bridge_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+		dsi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso
new file mode 100644
index 000000000000..8cea7ba32487
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	aliases {
+		display0 = "/display";
+		display1 = "/connector";
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 1>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dsi_bridge {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	lcd: display {
+		compatible = "osddisplays,osd101t2587-53ts";
+		reg = <0>;
+
+		label = "lcd";
+
+		backlight = <&lcd_bl>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_bridge_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+		dsi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index be005c9f42ef..b459a670f615 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -20,6 +20,7 @@
 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
@@ -135,6 +136,17 @@
 	pinctrl-names = "default";
 	phy0: ethernet-phy@0 {
 		reg = <0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_WHITE>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 
 	switch: switch@10 {
@@ -171,8 +183,8 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
index 095df5567c93..f4c4b213ef4e 100644
--- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
@@ -148,7 +148,7 @@
 
 			port@0 {
 				ethernet = <&eth0>;
-				label = "cpu";
+				phy-mode = "rgmii";
 				reg = <0>;
 
 				fixed-link {
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
index c9ac630e5874..1990f7d0cc79 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
@@ -68,8 +68,13 @@
 
 			port@10 {
 				reg = <10>;
-				label = "cpu";
+				phy-mode = "2500base-x";
+
 				ethernet = <&eth1>;
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
 			};
 
 		};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
index fa653b379490..b795ad573891 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
@@ -48,8 +48,13 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "2500base-x";
 				ethernet = <&eth1>;
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
 			};
 
 		};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 85e8d966f6c1..fc8216fd9f60 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -195,7 +195,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "sgmii";
 				ethernet = <&eth2>;
 
 				fixed-link {
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 0c1f238e4c30..2d8d319bec83 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -479,7 +479,6 @@
 
 			ports@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
 
@@ -491,7 +490,6 @@
 
 			ports@6 {
 				reg = <6>;
-				label = "cpu";
 				ethernet = <&eth0>;
 				phy-mode = "rgmii-id";
 
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index 2bcec5419b66..45cc784659fd 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -62,7 +62,7 @@
 			};
 
 			usb@58000 {
-				status = "ok";
+				status = "okay";
 			};
 
 			ethernet@70000 {
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index dbe8dfe236fb..7a0614fd0c93 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -302,7 +302,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0>;
 				fixed-link {
 					speed = <1000>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
index 4b91600eaf62..1e0e88465254 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -251,6 +251,14 @@
 	pinctrl-0 = <&pinctrl_rgmii1_default>;
 };
 
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
 &fmc {
 	status = "okay";
 	flash@0 {
@@ -439,6 +447,26 @@
 	status = "okay";
 };
 
+&i2c8 {
+	status = "okay";
+
+	gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#gpio-cells = <2>;
+
+		bmc-ocp0-en-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "bmc-ocp0-en-n";
+		};
+	};
+};
+
 &i2c9 {
 	status = "okay";
 };
@@ -530,13 +558,20 @@
 	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
 			"host0-reboot-ack-n","host0-ready","host0-shd-req-n",
 			"host0-shd-ack-n","s0-overtemp-n",
-	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
+	/*W0-W7*/	"","ocp-main-pwren","ocp-pgood","",
 			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
 	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
 			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
 			"s1-overtemp-n","s1-spi-auth-fail-n",
 	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
 	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
 };
 
 &gpio1 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
index 9b4cf5ebe6d5..c4b2efbfdf56 100644
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@@ -63,7 +63,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-max-frequency = <100000000>; /* 100 MHz */
+		spi-max-frequency = <50000000>; /* 50 MHz */
 #include "openbmc-flash-layout.dtsi"
 	};
 };
@@ -202,3 +202,7 @@
 	status = "okay";
 	aspeed,lpc-io-reg = <0xca2>;
 };
+
+&peci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
index ff4c07c69af1..4554abf0c7cd 100644
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
@@ -31,7 +31,7 @@
 		};
 
 		system-fault {
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
 	};
@@ -51,7 +51,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-max-frequency = <100000000>; /* 100 MHz */
+		spi-max-frequency = <50000000>; /* 50 MHz */
 #include "openbmc-flash-layout-64.dtsi"
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
index 8c05bd56ce1e..7a53f54833a0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
@@ -156,6 +156,7 @@
 
 &i2c8 {
 	status = "okay";
+	mctp-controller;
 	temperature-sensor@1f {
 		compatible = "ti,tmp421";
 		reg = <0x1f>;
@@ -165,6 +166,10 @@
 		compatible = "st,24c32";
 		reg = <0x50>;
 	};
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
 };
 
 &i2c9 {
@@ -238,4 +243,52 @@
 &gpio0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+
+	gpio-line-names =
+	/*A0-A7*/ "","","","","","","","",
+	/*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
+		  "power-bmc-slot1","power-bmc-slot2",
+		  "power-bmc-slot3","power-bmc-slot4","","",
+	/*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
+		  "reset-cause-nic-secondary","","","",
+	/*D0-D7*/ "","","","","","","","",
+	/*E0-E7*/ "","","","","","","","",
+	/*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
+		  "slot3-bmc-reset-button","slot4-bmc-reset-button",
+		  "","","","presence-emmc",
+	/*G0-G7*/ "","","","","","","","",
+	/*H0-H7*/ "","","","",
+		  "presence-mb-slot1","presence-mb-slot2",
+		  "presence-mb-slot3","presence-mb-slot4",
+	/*I0-I7*/ "","","","","","","bb-bmc-button","",
+	/*J0-J7*/ "","","","","","","","",
+	/*K0-K7*/ "","","","","","","","",
+	/*L0-L7*/ "","","","","","","","",
+	/*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
+	/*N0-N7*/ "","","","","bmc-ready","","","",
+	/*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
+	/*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
+		  "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
+		  "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
+	/*Q0-Q7*/ "","","","","","","","",
+	/*R0-R7*/ "","","","","","","","",
+	/*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
+	/*T0-T7*/ "","","","","","","","",
+	/*U0-U7*/ "","","","","","","","GND",
+	/*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
+		  "bmc-slot3-ac-button","bmc-slot4-ac-button",
+		  "","","","",
+	/*W0-W7*/ "","","","","","","","",
+	/*X0-X7*/ "","","","","","","","",
+	/*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
+	/*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
index a5be0ee048ec..81902cbe662c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
@@ -552,14 +552,14 @@
 &i2c3 {
 	status = "okay";
 
-	power-supply@58 {
-		compatible = "ibm,cffps";
-		reg = <0x58>;
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
 	};
 
-	power-supply@59 {
-		compatible = "ibm,cffps";
-		reg = <0x59>;
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
 	};
 };
 
@@ -686,7 +686,7 @@
 	};
 
 	eeprom@50 {
-		compatible = "atmel,24c64";
+		compatible = "atmel,24c128";
 		reg = <0x50>;
 	};
 
@@ -884,16 +884,6 @@
 	use-ncsi;
 };
 
-&mac3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
-		 <&syscon ASPEED_CLK_MAC4RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
 &wdt1 {
 	aspeed,reset-type = "none";
 	aspeed,external-signal;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index c3b0cd61ac85..c6f8f20914d1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -162,6 +162,11 @@
 		#size-cells = <1>;
 		ranges;
 
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
 		ramoops@b3e00000 {
 			compatible = "ramoops";
 			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
@@ -1887,6 +1892,7 @@
 	tpm@2e {
 		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
 		reg = <0x2e>;
+		memory-region = <&event_log>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 8246a60de0d0..172dd748d807 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -863,6 +863,15 @@
 				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
 				status = "disabled";
 			};
+
+			udma: dma-controller@1e79e000 {
+				compatible = "aspeed,ast2600-udma";
+				reg = <0x1e79e000 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <28>;
+				#dma-cells = <1>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 180e4b1aa2f6..5cd593028aff 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -578,7 +578,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 8aa9e8dea337..95ecb7d040a8 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -43,7 +43,8 @@
 					#size-cells = <1>;
 					compatible = "jedec,spi-nor";
 					reg = <0>;
-					spi-max-frequency = <80000000>;
+					spi-max-frequency = <104000000>;
+					spi-cs-setup-ns = <7>;
 					spi-tx-bus-width = <4>;
 					spi-rx-bus-width = <4>;
 					m25p,fast-read;
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index 83bcf9fe0152..4617805c7748 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -220,7 +220,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 1346b8f2b259..999adeca6f33 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -669,7 +669,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
index f4b2db9bc4ab..cd25ed2757b7 100644
--- a/arch/arm/boot/dts/bcm47622.dtsi
+++ b/arch/arm/boot/dts/bcm47622.dtsi
@@ -88,6 +88,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -119,6 +125,18 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index b774a8d63813..93281c47c9ba 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -66,6 +66,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	/* ARM bus */
@@ -203,6 +209,18 @@
 			status = "disabled";
 		};
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi
index 7cd55d64de71..ba7f265db121 100644
--- a/arch/arm/boot/dts/bcm63148.dtsi
+++ b/arch/arm/boot/dts/bcm63148.dtsi
@@ -60,6 +60,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <50000000>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -100,5 +106,17 @@
 			clock-names = "refclk";
 			status = "disabled";
 		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi
index 043e699cbc27..d8268a1e889b 100644
--- a/arch/arm/boot/dts/bcm63178.dtsi
+++ b/arch/arm/boot/dts/bcm63178.dtsi
@@ -71,6 +71,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -78,6 +79,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -109,6 +116,18 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi
index 5c72219bc194..49ecc1f0c18c 100644
--- a/arch/arm/boot/dts/bcm6756.dtsi
+++ b/arch/arm/boot/dts/bcm6756.dtsi
@@ -88,6 +88,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -119,6 +125,19 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi
index 81513a793815..fbc7d3a5dc5f 100644
--- a/arch/arm/boot/dts/bcm6846.dtsi
+++ b/arch/arm/boot/dts/bcm6846.dtsi
@@ -61,6 +61,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -100,5 +106,17 @@
 			clock-names = "refclk";
 			status = "disabled";
 		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi
index 5fa5feac0e29..5e0fe26530f1 100644
--- a/arch/arm/boot/dts/bcm6855.dtsi
+++ b/arch/arm/boot/dts/bcm6855.dtsi
@@ -78,6 +78,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -109,6 +115,19 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
index 4ec836ac4baf..96529d3d4dc2 100644
--- a/arch/arm/boot/dts/bcm6878.dtsi
+++ b/arch/arm/boot/dts/bcm6878.dtsi
@@ -61,6 +61,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -68,6 +69,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -100,6 +107,18 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts
index 6f083724ab8e..93b8ce22678d 100644
--- a/arch/arm/boot/dts/bcm947622.dts
+++ b/arch/arm/boot/dts/bcm947622.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts
index d28c4f130ca2..1b405c249213 100644
--- a/arch/arm/boot/dts/bcm963138.dts
+++ b/arch/arm/boot/dts/bcm963138.dts
@@ -25,3 +25,7 @@
 &serial0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 15bec75be74c..b5af61853a07 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -50,3 +50,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts
index 98f6a6d09f50..1f5d6d783f09 100644
--- a/arch/arm/boot/dts/bcm963148.dts
+++ b/arch/arm/boot/dts/bcm963148.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts
index fa096e9cde23..d036e99dd8d1 100644
--- a/arch/arm/boot/dts/bcm963178.dts
+++ b/arch/arm/boot/dts/bcm963178.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts
index 9a4a87ba9c8a..8b104f3fb14a 100644
--- a/arch/arm/boot/dts/bcm96756.dts
+++ b/arch/arm/boot/dts/bcm96756.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts
index c70ebccabc19..55852c229608 100644
--- a/arch/arm/boot/dts/bcm96846.dts
+++ b/arch/arm/boot/dts/bcm96846.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts
index 4438152561ac..2ad880af2104 100644
--- a/arch/arm/boot/dts/bcm96855.dts
+++ b/arch/arm/boot/dts/bcm96855.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts
index 8fbc175cb452..b7af8ade7a9d 100644
--- a/arch/arm/boot/dts/bcm96878.dts
+++ b/arch/arm/boot/dts/bcm96878.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 1fdd9a249165..0ca849885d1f 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -415,7 +415,7 @@
 &aemif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_pins>;
-	status = "ok";
+	status = "okay";
 	cs3 {
 		#address-cells = <2>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 85408d4c6f2e..062c86361640 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -422,7 +422,7 @@
 				clocks = <&gate_clk 3>;
 				clock-names = "sata";
 				#phy-cells = <0>;
-				status = "ok";
+				status = "okay";
 			};
 
 			audio0: audio-controller@b0000 {
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 94944cc21931..dd03e3860f97 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -311,6 +311,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi
index ace3eb8a97b8..4e1bf080eaca 100644
--- a/arch/arm/boot/dts/e70k02.dtsi
+++ b/arch/arm/boot/dts/e70k02.dtsi
@@ -321,6 +321,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
index a1e22f630638..660cc7fac4db 100644
--- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts
+++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
@@ -16,6 +16,10 @@
 	model = "Samsung ARTIK5 evaluation board";
 	compatible = "samsung,artik5-eval", "samsung,artik5",
 			"samsung,exynos3250", "samsung,exynos3";
+
+	aliases {
+		mmc0 = &mshc_2;
+	};
 };
 
 &mshc_2 {
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 0ac3f284fbb8..3fdd922e635c 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -17,6 +17,11 @@
 / {
 	compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
 
+	aliases {
+		mmc0 = &mshc_0;
+		mmc1 = &mshc_1;
+	};
+
 	chosen {
 		stdout-path = &serial_2;
 	};
@@ -321,6 +326,7 @@
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
 	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 80d90fe7fad1..2de877d4ccc5 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -22,6 +22,7 @@
 
 	aliases {
 		i2c7 = &i2c_max77836;
+		mmc0 = &mshc_0;
 	};
 
 	memory@40000000 {
@@ -443,6 +444,7 @@
 	vmmc-supply = <&vemmc_reg>;
 	clock-frequency = <100000000>;
 	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 1f9cba0607e1..88fb3e68ff02 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -23,6 +23,8 @@
 
 	aliases {
 		i2c7 = &i2c_max77836;
+		mmc0 = &mshc_0;
+		mmc1 = &mshc_1;
 	};
 
 	chosen {
@@ -624,6 +626,7 @@
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
 	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 28bb2ce8ccf7..bd37f1b587f0 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -28,9 +28,6 @@
 	aliases {
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
-		mshc0 = &mshc_0;
-		mshc1 = &mshc_1;
-		mshc2 = &mshc_2;
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		i2c0 = &i2c_0;
@@ -346,7 +343,7 @@
 		};
 
 		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos3250-pmu", "syscon";
+			compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon";
 			reg = <0x10020000 0x4000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -354,12 +351,11 @@
 			clock-names = "clkout8";
 			clocks = <&cmu CLK_FIN_PLL>;
 			#clock-cells = <1>;
-		};
 
-		mipi_phy: video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		pd_cam: power-domain@10023c00 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 44dcb1377475..8dd6976ab0a7 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -105,12 +105,6 @@
 			reg = <0x12570000 0x14>;
 		};
 
-		mipi_phy: video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
 		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023c40 0x20>;
@@ -181,11 +175,16 @@
 		};
 
 		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos4210-pmu", "syscon";
+			compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon";
 			reg = <0x10020000 0x4000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		dsi_0: dsi@11c80000 {
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index bba85011ecc9..37cd4dde53e4 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -25,6 +25,12 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 1103e7f92b57..f1927ca15e08 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -30,6 +30,11 @@
 		       0x70000000 0x10000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
 		stdout-path = "serial2:115200n8";
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 181c99eca675..b566f878ed84 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -25,6 +25,10 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
 		stdout-path = "serial1:115200n8";
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index b8e9dd23fc51..ff6ee4b2c31b 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -26,6 +26,12 @@
 			0x70000000 0x10000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
+	};
+
 	chosen {
 		bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
 		stdout-path = "serial2:115200n8";
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 62bf335d5bed..8fe0d5d2be2d 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -24,6 +24,12 @@
 			0x50000000 0x10000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
+	};
+
 	chosen {
 		bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
 		stdout-path = "serial2:115200n8";
@@ -516,7 +522,7 @@
 };
 
 &mct {
-	compatible = "none";
+	status = "disabled";
 };
 
 &mdma1 {
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index b596e997e451..ded232b04e0d 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -20,6 +20,10 @@
 	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
 	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
 
+	aliases {
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait";
 		stdout-path = "serial2:115200n8";
@@ -182,7 +186,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index e42e39dc0e40..7bc6968af9c3 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -23,6 +23,10 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &mshc_0;
+	};
+
 	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
 		reg = <0x0203f000 0x1000>;
@@ -476,6 +480,7 @@
 	vmmc-supply = <&buck9_reg>;
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 525f945c4b91..e6b949c1a00f 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -25,6 +25,9 @@
 	aliases {
 		i2c11 = &i2c_max77693;
 		i2c12 = &i2c_max77693_fuel;
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+		mmc3 = &sdhci_3;
 	};
 
 	chosen {
@@ -497,8 +500,7 @@
 	pinctrl-0 = <&fimc_is_uart>;
 	pinctrl-names = "default";
 	status = "okay";
-
-	};
+};
 
 &fimc_lite_0 {
 	status = "okay";
@@ -592,7 +594,6 @@
 		/* CAM_B_CLKOUT */
 		clocks = <&camera 1>;
 		clock-names = "extclk";
-		samsung,camclk-out = <1>;
 		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
@@ -979,6 +980,7 @@
 	samsung,dw-mshc-ciu-div = <0>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
+	mmc-ddr-1_8v;
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 7c2780d3e37c..45ef7b7ba7e0 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -13,6 +13,11 @@
 #include "exynos-mfc-reserved-memory.dtsi"
 
 / {
+	aliases {
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = &serial_1;
 	};
@@ -533,6 +538,7 @@
 
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index ea9fd284386d..23b151645d66 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -25,6 +25,11 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &mshc_0;
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -498,6 +503,7 @@
 
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index 3e05a49f29ff..0b89d5682f85 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -26,6 +26,12 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+		mmc3 = &sdhci_3;
+	};
+
 	chosen {
 		stdout-path = &serial_2;
 	};
@@ -188,14 +194,12 @@
 			pinctrl-names = "default";
 			interrupt-parent = <&gpx0>;
 			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
-			irq-trigger = <0x1>;
 			st,adc-freq = <3>;
 			st,mod-12b = <1>;
 			st,ref-sel = <0>;
 			st,sample-time = <3>;
 
-			stmpe_adc {
+			adc {
 				compatible = "st,stmpe-adc";
 				#io-channel-cells = <1>;
 				st,norequest-mask = <0x2f>;
@@ -695,6 +699,7 @@
 	samsung,dw-mshc-ciu-div = <0>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
+	mmc-ddr-1_8v;
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
 	bus-width = <4>;
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index a40ff394977c..715dfcba1417 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -22,6 +22,10 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
 		stdout-path = "serial1:115200n8";
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index e0b6162d2e2a..5a2dcdc5c28b 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -17,6 +17,10 @@
 	model = "FriendlyARM TINY4412 board based on Exynos4412";
 	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = &serial_0;
 	};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 11f9dd94b6b3..82a36fb5ee8b 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -28,7 +28,6 @@
 		pinctrl3 = &pinctrl_3;
 		fimc-lite0 = &fimc_lite_0;
 		fimc-lite1 = &fimc_lite_1;
-		mshc0 = &mshc_0;
 	};
 
 	bus_acp: bus-acp {
@@ -798,7 +797,7 @@
 };
 
 &pmu_system_controller {
-	compatible = "samsung,exynos4412-pmu", "syscon";
+	compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon";
 	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
 			"clkout4", "clkout8", "clkout9";
 	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 2e3da5670bc2..d586189966da 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -23,6 +23,11 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -192,12 +197,15 @@
 		vddio-supply = <&vcc_1v8_reg>;
 		vddlvds-supply = <&vcc_3v3_reg>;
 		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@1 {
-			reg = <1>;
-			bridge_out_ep: endpoint {
-				remote-endpoint = <&panel_ep>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@1 {
+				reg = <1>;
+				bridge_out_ep: endpoint {
+					remote-endpoint = <&panel_ep>;
+				};
 			};
 		};
 	};
@@ -586,6 +594,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 &mmc_2 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 831b3494bd46..bb623726ef1e 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -17,6 +17,8 @@
 	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
 
 	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
 	};
 
 	memory@40000000 {
@@ -350,6 +352,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 &mmc_2 {
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 3d84b9c6dea3..59b2cc35c37b 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -15,6 +15,9 @@
 / {
 	aliases {
 		i2c104 = &i2c_104;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* SD */
+		mmc2 = &mmc_3; /* WiFi */
 	};
 
 	memory@40000000 {
@@ -549,6 +552,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 /* uSD card */
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index 5eca10ecd550..c12bb17631b7 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -23,6 +23,11 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_1;
+	};
+
 	chosen {
 		bootargs = "console=tty1";
 		stdout-path = "serial3:115200n8";
@@ -431,6 +436,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 /*
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 60a623e3a200..1a4c6c028d03 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -30,10 +30,6 @@
 		gsc1 = &gsc_1;
 		gsc2 = &gsc_2;
 		gsc3 = &gsc_3;
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		mshc3 = &mmc_3;
 		i2c4 = &i2c_4;
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
@@ -290,7 +286,7 @@
 		};
 
 		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5250-pmu", "syscon";
+			compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon";
 			reg = <0x10040000 0x5000>;
 			clock-names = "clkout16";
 			clocks = <&clock CLK_FIN_PLL>;
@@ -298,6 +294,16 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			dp_phy: dp-phy {
+				compatible = "samsung,exynos5250-dp-video-phy";
+				#phy-cells = <0>;
+			};
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		watchdog@101d0000 {
@@ -810,18 +816,6 @@
 			status = "disabled";
 		};
 
-		dp_phy: video-phy-0 {
-			compatible = "samsung,exynos5250-dp-video-phy";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <0>;
-		};
-
-		mipi_phy: video-phy-1 {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
 		dsi_0: dsi@14500000 {
 			compatible = "samsung,exynos4210-mipi-dsi";
 			reg = <0x14500000 0x10000>;
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 387b8494f18f..d072a7398866 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -18,6 +18,11 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -89,6 +94,7 @@
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 6ddd1dd2fb0b..882fc77c4bc4 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -21,6 +21,8 @@
 
 	aliases {
 		ethernet = &ethernet;
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
 	};
 
 	memory@40000000 {
@@ -513,6 +515,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	vmmc-supply = <&ldo20_reg>;
 	vqmmc-supply = <&ldo11_reg>;
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index b8f953c41c73..bb29b76f6f6a 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -18,6 +18,11 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -61,6 +66,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 55b7759682a9..809ddda02e53 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -23,6 +23,11 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial3:115200n8";
 	};
@@ -778,6 +783,7 @@
 	status = "okay";
 	non-removable;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
index 63675fe189cd..f525b2f5e4e0 100644
--- a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
+++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
@@ -28,6 +28,11 @@
 	 * for more details.
 	 */
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc2 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -604,6 +609,7 @@
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	non-removable;
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 9e2123470cad..7a48f2b32819 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -31,6 +31,9 @@
 	aliases {
 		/* Assign 20 so we don't get confused w/ builtin ones */
 		i2c20 = &i2c_tunnel;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* uSD */
+		mmc2 = &mmc_1; /* WiFi */
 	};
 
 	backlight: backlight {
@@ -722,6 +725,7 @@
 /* eMMC flash */
 &mmc_0 {
 	status = "okay";
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 4d7b6d9008a7..e299344e427a 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -21,6 +21,11 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		bootargs = "init=/linuxrc";
 		stdout-path = "serial2:115200n8";
@@ -355,6 +360,7 @@
 	status = "okay";
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 13d7be236a23..dd291f1199f2 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -19,9 +19,6 @@
 	compatible = "samsung,exynos5420", "samsung,exynos5";
 
 	aliases {
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
@@ -696,18 +693,6 @@
 			status = "disabled";
 		};
 
-		dp_phy: dp-video-phy {
-			compatible = "samsung,exynos5420-dp-video-phy";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <0>;
-		};
-
-		mipi_phy: mipi-video-phy {
-			compatible = "samsung,exynos5420-mipi-video-phy";
-			syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
 		dsi: dsi@14500000 {
 			compatible = "samsung,exynos5410-mipi-dsi";
 			reg = <0x14500000 0x10000>;
@@ -933,7 +918,7 @@
 		};
 
 		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5420-pmu", "syscon";
+			compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon";
 			reg = <0x10040000 0x5000>;
 			clock-names = "clkout16";
 			clocks = <&clock CLK_FIN_PLL>;
@@ -941,6 +926,16 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			dp_phy: dp-phy {
+				compatible = "samsung,exynos5420-dp-video-phy";
+				#phy-cells = <0>;
+			};
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,exynos5420-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		tmu_cpu0: tmu@10060000 {
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 30fc677d8bac..2f5b8602e020 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -19,6 +19,10 @@
 		reg = <0x40000000 0x7ea00000>;
 	};
 
+	aliases {
+		mmc2 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e6e7e2ff2a26..b4a851aa8881 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -13,6 +13,10 @@
 #include "exynos5422-odroid-core.dtsi"
 
 / {
+	aliases {
+		mmc0 = &mmc_0;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -472,6 +476,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	max-frequency = <200000000>;
diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
index df41723d56d4..c35261a338ff 100644
--- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
+++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
@@ -19,6 +19,10 @@
 
 	chassis-type = "handset";
 
+	aliases {
+		mmc0 = &mmc_0;
+	};
+
 	memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x80000000>; /* 2 GiB */
@@ -597,6 +601,7 @@
 /* eMMC flash */
 &mmc_0 {
 	status = "okay";
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 0ebcb66c6319..1f544f12da6c 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -29,6 +29,9 @@
 	aliases {
 		/* Assign 20 so we don't get confused w/ builtin ones */
 		i2c20 = &i2c_tunnel;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* SD */
+		mmc2 = &mmc_1; /* WiFi */
 	};
 
 	backlight: backlight {
@@ -703,6 +706,7 @@
 /* eMMC flash */
 &mmc_0 {
 	status = "okay";
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index ce356c469e1e..d7f5daecc9dc 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -24,42 +24,42 @@
 
 	amba-bus {
 		dual_timer0: dual_timer@800000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		uart0: serial@b00000 {	/* console */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
 			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart1: serial@b01000 { /* modem */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
 			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart2: serial@b02000 { /* audience */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
 			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart3: serial@b03000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
 			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart4: serial@b04000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
 			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
-			status = "ok";
+			status = "okay";
 		};
 
 		pmx0: pinmux@803000 {
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
index f5691dbc26d2..0210064bf6a5 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -23,7 +23,7 @@
 
 	soc {
 		uart0: serial@4007000 {
-			status = "ok";
+			status = "okay";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index 14a92fe59770..98672932e41b 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -14,67 +14,59 @@
 		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
+};
 
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x300000>;
-				};
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
 
-				partition@300000 {
-					label = "env";
-					reg = <0x300000 0x80000>;
-				};
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
 
-				partition@380000 {
-					label = "env2";
-					reg = <0x380000 0x80000>;
-				};
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x300000>;
+	};
 
-				partition@400000 {
-					label = "dtb";
-					reg = <0x400000 0x80000>;
-				};
+	partition@300000 {
+		label = "env";
+		reg = <0x300000 0x80000>;
+	};
 
-				partition@480000 {
-					label = "splash";
-					reg = <0x480000 0x80000>;
-				};
+	partition@380000 {
+		label = "env2";
+		reg = <0x380000 0x80000>;
+	};
 
-				partition@500000 {
-					label = "kernel";
-					reg = <0x500000 0x800000>;
-				};
+	partition@400000 {
+		label = "dtb";
+		reg = <0x400000 0x80000>;
+	};
 
-				partition@d00000 {
-					label = "rootfs";
-					reg = <0xd00000 0xf300000>;
-				};
-			};
-		};
+	partition@480000 {
+		label = "splash";
+		reg = <0x480000 0x80000>;
+	};
 
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
+	partition@500000 {
+		label = "kernel";
+		reg = <0x500000 0x800000>;
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
+	partition@d00000 {
+		label = "rootfs";
+		reg = <0xd00000 0xf300000>;
 	};
 };
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index 1b253b47006c..4704b6141836 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -10,166 +10,6 @@
 	model = "Armadeus Systems APF28Dev docking/development board";
 	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_apf28dev>;
-
-				hog_pins_apf28dev: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D16__GPIO_1_16
-						MX28_PAD_LCD_D17__GPIO_1_17
-						MX28_PAD_LCD_D18__GPIO_1_18
-						MX28_PAD_LCD_D19__GPIO_1_19
-						MX28_PAD_LCD_D20__GPIO_1_20
-						MX28_PAD_LCD_D21__GPIO_1_21
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_apf28dev: otg-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_16bit_pins_a
-						&lcdif_pins_apf28dev>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <16>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33000033>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <96>;
-							hfront-porch = <96>;
-							vback-porch = <20>;
-							vfront-porch = <21>;
-							hsync-len = <64>;
-							vsync-len = <4>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can0_vcc>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_apf28dev
-					&usb0_id_pins_b>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -223,3 +63,155 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can0_vcc>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_16bit_pins_a
+		     &lcdif_pins_apf28dev>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_apf28dev>;
+
+	hog_pins_apf28dev: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D16__GPIO_1_16
+			MX28_PAD_LCD_D17__GPIO_1_17
+			MX28_PAD_LCD_D18__GPIO_1_18
+			MX28_PAD_LCD_D19__GPIO_1_19
+			MX28_PAD_LCD_D20__GPIO_1_20
+			MX28_PAD_LCD_D21__GPIO_1_21
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_apf28dev: otg-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_apf28dev
+		     &usb0_id_pins_b>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index b86be320496b..f9bf40d96568 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -11,200 +11,6 @@
 		reg = <0x40000000 0x04000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_RDY1__GPIO_0_21
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_JTAG_RTCK__GPIO_4_20
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apx4: lcdif-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-						MX28_PAD_SSP2_SS1__SSP2_D1
-						MX28_PAD_SSP2_SS2__SSP2_D2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_apx4>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <88>;
-							hfront-porch = <40>;
-							vback-porch = <32>;
-							vfront-porch = <13>;
-							hsync-len = <48>;
-							vsync-len = <3>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				pcf8563: rtc@51 {
-					compatible = "phg,pcf8563";
-					reg = <0x51>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_2pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&usb1_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-		      status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -238,3 +44,189 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_2pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_apx4>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				vback-porch = <32>;
+				vfront-porch = <13>;
+				hsync-len = <48>;
+				vsync-len = <3>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "phg,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_RDY1__GPIO_0_21
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_JTAG_RTCK__GPIO_4_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apx4: lcdif-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA4__SSP2_D0
+			MX28_PAD_SSP0_DATA5__SSP2_D3
+			MX28_PAD_SSP0_DATA6__SSP2_CMD
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+			MX28_PAD_SSP2_SS1__SSP2_D1
+			MX28_PAD_SSP2_SS2__SSP2_D2
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb1 {
+      status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 85aa1cc3ff66..d004b1cbb4ae 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -16,107 +16,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				ssd1306_cfa10036: ssd1306-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_cfa10036: leds-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_cfa10036: otg-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY0__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x31c3 /*
-						MX28_PAD_PWM3__GPIO_3_28 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_b>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				ssd1306: oled@3c {
-					compatible = "solomon,ssd1306fb-i2c";
-					pinctrl-names = "default";
-					pinctrl-0 = <&ssd1306_cfa10036>;
-					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-					solomon,height = <32>;
-					solomon,width = <128>;
-					solomon,page-offset = <0>;
-					solomon,com-lrremap;
-					solomon,com-invdir;
-					solomon,com-offset = <32>;
-				};
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_cfa10036>;
-			dr_mode = "peripheral";
-			phy_type = "utmi";
-			status = "okay";
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -138,3 +37,95 @@
 		gpio = <&gpio3 28 0>;
 	};
 };
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_b>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ssd1306: oled@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssd1306_cfa10036>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+		solomon,height = <32>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,com-lrremap;
+		solomon,com-invdir;
+		solomon,com-offset = <32>;
+	};
+};
+
+&pinctrl {
+	ssd1306_cfa10036: ssd1306-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_cfa10036: leds-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_cfa10036: otg-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY0__USB0_ID
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			0x31c3 /*
+			MX28_PAD_PWM3__GPIO_3_28 */
+		>;
+		fsl,drive-strength = <0>;
+		fsl,voltage = <1>;
+		fsl,pull-up = <0>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_cfa10036>;
+	dr_mode = "peripheral";
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 9ef0d567ea48..94d6614c1983 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -78,226 +78,6 @@
 		};
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10049: usb-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2cmux_pins_cfa10049: i2cmux-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10049: mac0-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pca_pins_cfa10049: pca-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_pins_cfa10049: rotary-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi2_pins_cfa10049: spi2-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_cfa10049: spi3-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPIO_0_24
-						MX28_PAD_GPMI_RESETN__GPIO_0_28
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_ALE__GPIO_0_26
-						MX28_PAD_GPMI_CLE__GPIO_0_27
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				w1_gpio_pins: w1-gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D21__GPIO_1_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049
-					     &lcdif_pins_cfa10049_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -315,18 +95,6 @@
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10049>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
 	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
@@ -426,3 +194,225 @@
 		gpios = <&gpio1 21 0>;
 	};
 };
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10049
+		     &lcdif_pins_cfa10049
+		     &lcdif_pins_cfa10049_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a
+		&mac0_pins_cfa10049>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10049: usb-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	i2cmux_pins_cfa10049: i2cmux-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_pins_cfa10049: mac0-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	pca_pins_cfa10049: pca-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_pins_cfa10049: rotary-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_I2C0_SCL__GPIO_3_24
+			MX28_PAD_I2C0_SDA__GPIO_3_25
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF1_SDATA0__GPIO_3_26
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi2_pins_cfa10049: spi2-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi3_pins_cfa10049: spi3-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_GPMI_RESETN__GPIO_0_28
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_ALE__GPIO_0_26
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	w1_gpio_pins: w1-gpio@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index fac5bbda7a93..42ba7da48beb 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -14,121 +14,6 @@
 	model = "Crystalfontz CFA-10055 Board";
 	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055
-					     &lcdif_pins_cfa10055_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-		};
-	};
-
 	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
@@ -159,3 +44,112 @@
 		default-brightness-level = <6>;
 	};
 };
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+		     &lcdif_pins_cfa10055
+		     &lcdif_pins_cfa10055_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	spi2_pins_cfa10055: spi2-cfa10055@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
index c5f3337e8b39..0e15bdfd7281 100644
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -13,81 +13,6 @@
 	model = "Crystalfontz CFA-10056 Board";
 	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10056: spi2-cfa10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_pins_cfa10056: lcdif-10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						&lcdif_pins_cfa10056
-						&lcdif_pins_cfa10056_pullup >;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <32000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <5>;
-							vsync-len = <5>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
@@ -111,3 +36,74 @@
 		};
 	};
 };
+
+&pinctrl {
+	spi2_pins_cfa10056: spi2-cfa10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_pins_cfa10056: lcdif-10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			&lcdif_pins_cfa10056
+			&lcdif_pins_cfa10056_pullup >;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <32000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <5>;
+				vsync-len = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 2f7e479dbc74..27602c01f162 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -14,126 +14,6 @@
 	model = "Crystalfontz CFA-10057 Board";
 	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10057: usb-10057@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10057: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
-					     &lcdif_pins_cfa10057>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hfront-porch = <12>;
-							hback-porch = <2>;
-							vfront-porch = <5>;
-							vback-porch = <3>;
-							hsync-len = <2>;
-							vsync-len = <2>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -151,17 +31,6 @@
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 4 5000000>;
@@ -169,3 +38,124 @@
 		default-brightness-level = <7>;
 	};
 };
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+		     &lcdif_pins_cfa10057>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <12>;
+				hback-porch = <2>;
+				vfront-porch = <5>;
+				vback-porch = <3>;
+				hsync-len = <2>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10057: usb-10057@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10057: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index 4465fd86785a..931c4d089b26 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -14,93 +14,6 @@
 	model = "Crystalfontz CFA-10058 Board";
 	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10058: usb-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10058: lcdif-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						 &lcdif_pins_cfa10058>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <40>;
-							hfront-porch = <40>;
-							vback-porch = <13>;
-							vfront-porch = <29>;
-							hsync-len = <8>;
-							vsync-len = <8>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -118,17 +31,6 @@
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 3 5000000>;
@@ -136,3 +38,91 @@
 		default-brightness-level = <6>;
 	};
 };
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			 &lcdif_pins_cfa10058>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <40>;
+				vback-porch = <13>;
+				vfront-porch = <29>;
+				hsync-len = <8>;
+				vsync-len = <8>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10058: usb-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10058: lcdif-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
index d451fa018d83..b73020ff1053 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
@@ -5,172 +5,13 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
+#include "imx28-duckbill-2.dts"
 
 / {
 	model = "I2SE Duckbill 2 485";
 	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
 	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
 		rs485-red {
 			label = "duckbill:red:rs485";
 			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
@@ -182,3 +23,16 @@
 		};
 	};
 };
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
index 73f521c46c1e..473d99b9b42f 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -5,184 +5,14 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
+#include "imx28-duckbill-2.dts"
 
 / {
 	model = "I2SE Duckbill 2 EnOcean";
 	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_AUART0_CTS__GPIO_3_2
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				enocean_button: enocean-button@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
 	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
 		enocean-blue {
 			label = "duckbill:blue:enocean";
 			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
@@ -211,3 +41,29 @@
 		};
 	};
 };
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_AUART0_CTS__GPIO_3_2
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
+
+&pinctrl {
+	enocean_button: enocean-button@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
index 0e8be5975709..859d97a5a775 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
@@ -5,9 +5,7 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
+#include "imx28-duckbill-2.dts"
 
 / {
 	model = "I2SE Duckbill 2 SPI";
@@ -16,179 +14,50 @@
 	aliases {
 		ethernet1 = &qca7000;
 	};
+};
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				qca7000: ethernet@0 {
-					reg = <0>;
-					compatible = "qca,qca7000";
-					pinctrl-names = "default";
-					pinctrl-0 = <&qca7000_pins>;
-					interrupt-parent = <&gpio3>;
-					interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-					spi-cpha;
-					spi-cpol;
-					spi-max-frequency = <8000000>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: led@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				qca7000_pins: qca7000@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
-						MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
-						MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
-						MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
-						MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
-						MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
+&auart0 {
+	status = "disabled";
+};
 
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
+&i2c0 {
+	status = "disabled";
+};
 
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
+&pinctrl {
+	qca7000_pins: qca7000@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
+			MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
+			MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
+			MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
+			MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
+			MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
+};
 
-	leds {
-		compatible = "gpio-leds";
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	/delete-property/ bus-width;
+	/delete-property/ vmmc-supply;
+	status = "okay";
+
+	qca7000: ethernet@0 {
+		reg = <0>;
+		compatible = "qca,qca7000";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
+		pinctrl-0 = <&qca7000_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <8000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
index 23fd3036404d..4e28212e9626 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2.dts
@@ -18,138 +18,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
@@ -176,3 +44,127 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_phy_int_pin>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_int_pin: mac0-phy-int@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20
+			MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+	non-removable;
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_b
+		&mmc2_cd_cfg &mmc2_sck_cfg_b>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index c666afb12445..13ffd533fdea 100644
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -17,108 +17,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			status = "okay";
-		};
-	};
-
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
@@ -145,3 +43,97 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 1053b7c584d8..783abb82b2a8 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -95,266 +95,258 @@
 		};
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-					     &gpmi_pins_evk>;
-				status = "okay";
-			};
+	sound {
+		compatible = "fsl,imx28-evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
 
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio2 12 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio3_5>;
 
-			ssp1: spi@80012000 {
-				compatible = "fsl,imx28-mmc";
-				bus-width = <8>;
-				wp-gpios = <&gpio0 28 0>;
-			};
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 5 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
 
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "sst,sst25vf016b", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
+	backlight_display: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
 
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP1_CMD__GPIO_2_13
-						MX28_PAD_SSP1_DATA3__GPIO_2_15
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-						MX28_PAD_SSP1_SCK__GPIO_2_12
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_AUART2_TX__GPIO_3_9
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio3_5: led_gpio3_5@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_evk: gpmi-nand-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPMI_CE1N
-						MX28_PAD_GPMI_RDY1__GPMI_READY1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_evk: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
 
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_evk>;
-				status = "okay";
-
-				port {
-					display_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-			};
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
 
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
 
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-		};
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
 
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
 
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+		     &gpmi_pins_evk>;
+	status = "okay";
+};
 
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-				fsl,ave-ctrl = <4>;
-				fsl,ave-delay = <2>;
-				fsl,settling = <10>;
-			};
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_evk>;
+	status = "okay";
 
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				at24@51 {
-					compatible = "atmel,24c32";
-					pagesize = <32>;
-					reg = <0x51>;
-				};
-			};
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
 
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	fsl,ave-ctrl = <4>;
+	fsl,ave-delay = <2>;
+	fsl,settling = <10>;
+	status = "okay";
+};
 
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
 
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
+	at24@51 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x51>;
+	};
+};
 
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
-				status = "okay";
-			};
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
 
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
 
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP1_CMD__GPIO_2_13
+			MX28_PAD_SSP1_DATA3__GPIO_2_15
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_SSP1_SCK__GPIO_2_12
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_AUART2_TX__GPIO_3_9
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_id_pins_a>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_fec_3v3>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
+	led_pin_gpio3_5: led_gpio3_5@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
 
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
+	gpmi_pins_evk: gpmi-nand-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPMI_CE1N
+			MX28_PAD_GPMI_RDY1__GPMI_READY1
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	sound {
-		compatible = "fsl,imx28-evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
+	lcdif_pins_evk: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
+};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio3_5>;
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
 
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 5 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
 
-	backlight_display: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio2 12 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp1 {
+	compatible = "fsl,imx28-mmc";
+	bus-width = <8>;
+	wp-gpios = <&gpio0 28 0>;
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
 	};
 };
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_a>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
index 2bdb4c093545..c08b14ad7cd5 100644
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@@ -14,31 +14,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@68 {
-					compatible = "st,m41t62";
-					reg = <0x68>;
-				};
-			};
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -54,3 +29,22 @@
 		};
 	};
 };
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index 865ac3d573c7..6b01de9efd02 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -15,187 +15,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "gpmi-nfc-0-boot";
-					reg = <0x00000000 0x01400000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "gpmi-nfc-general-use";
-					reg = <0x01400000 0x0ec00000>;
-				};
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_a
-					     &mmc2_cd_cfg
-					     &mmc2_sck_cfg_a>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd1>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-						MX28_PAD_PWM4__GPIO_3_29
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_VSYNC__LCD_VSYNC
-						MX28_PAD_LCD_HSYNC__LCD_HSYNC
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_RESET__LCD_RESET
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_gpio: leds-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_MISO__GPIO_2_26
-						MX28_PAD_SSP3_SCK__GPIO_2_24
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ocotp@8002c000 {
-				status = "okay";
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <6410256>;
-							hactive = <320>;
-							vactive = <240>;
-							hback-porch = <38>;
-							hfront-porch = <20>;
-							vback-porch = <15>;
-							vfront-porch = <5>;
-							hsync-len = <30>;
-							vsync-len = <3>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			disable-over-current;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 3 5000000>;
@@ -264,3 +83,176 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+
+	partition@0 {
+		label = "gpmi-nfc-0-boot";
+		reg = <0x00000000 0x01400000>;
+		read-only;
+	};
+
+	partition@1 {
+		label = "gpmi-nfc-general-use";
+		reg = <0x01400000 0x0ec00000>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <6410256>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vfront-porch = <5>;
+				hsync-len = <30>;
+				vsync-len = <3>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+			MX28_PAD_PWM4__GPIO_3_29
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_RESET__LCD_RESET
+			MX28_PAD_LCD_CS__LCD_ENABLE
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_gpio: leds-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP3_MISO__GPIO_2_26
+			MX28_PAD_SSP3_SCK__GPIO_2_24
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_a
+		     &mmc2_cd_cfg
+		     &mmc2_sck_cfg_a>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd1>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 13acdc7916b9..e350d57a4cec 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -11,220 +11,6 @@
 	model = "Aries/DENX M28EVK";
 	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio3 10 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p80", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_AUART2_CTS__GPIO_3_10
-						MX28_PAD_AUART2_RTS__GPIO_3_11
-						MX28_PAD_AUART3_RX__GPIO_3_12
-						MX28_PAD_AUART3_TX__GPIO_3_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_ENABLE__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33260000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <0>;
-							hfront-porch = <256>;
-							vback-porch = <0>;
-							vfront-porch = <45>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				eeprom: eeprom@51 {
-					compatible = "atmel,24c128";
-					reg = <0x51>;
-					pagesize = <32>;
-				};
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_a>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 4 5000000>;
@@ -269,3 +55,209 @@
 		audio-codec = <&sgtl5000>;
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	eeprom: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <0>;
+				hfront-porch = <256>;
+				vback-porch = <0>;
+				vfront-porch = <45>;
+				hsync-len = <1>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	status = "okay";
+	fsl,lradc-touchscreen-wires = <4>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	clocks = <&clks 57>, <&clks 57>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_AUART2_CTS__GPIO_3_10
+			MX28_PAD_AUART2_RTS__GPIO_3_11
+			MX28_PAD_AUART3_RX__GPIO_3_12
+			MX28_PAD_AUART3_TX__GPIO_3_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio3 10 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 90928db0df70..5d74a68c56ff 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -15,111 +15,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog-gpios@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPIO_0_0
-						MX28_PAD_GPMI_D03__GPIO_0_3
-						MX28_PAD_GPMI_D06__GPIO_0_6
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256", "mr25h256";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				eeprom: eeprom@52 {
-					compatible = "atmel,24c64";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_b>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -164,3 +59,99 @@
 
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog-gpios@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D06__GPIO_0_6
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256", "mr25h256";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_b>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
index 0d58da1c0cc5..ae6ed5c41be3 100644
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ b/arch/arm/boot/dts/imx28-ts4600.dts
@@ -18,50 +18,6 @@
 		reg = <0x40000000 0x10000000>;   /* 256MB */
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_sck_cfg
-					     &en_sd_pwr>;
-				broken-cd;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-
-				en_sd_pwr: en-sd-pwr@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
 	reg_vddio_sd0: regulator-vddio-sd0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vddio-sd0";
@@ -72,3 +28,39 @@
 	};
 
 };
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	en_sd_pwr: en-sd-pwr@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_sck_cfg
+		     &en_sd_pwr>;
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 096f246032c6..ffe58c7093e1 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 /*
  * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
  * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts
index e8325fd680d9..e6a4e2770640 100644
--- a/arch/arm/boot/dts/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/imx6dl-alti6p.dts
@@ -22,6 +22,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	i2c2-mux {
@@ -191,6 +192,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -208,10 +216,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clock_ksz8081>;
-	clock-names = "ipg", "ahb", "ptp";
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
index 864dc5018451..33825b5a8f26 100644
--- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -28,6 +28,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_usb_h1_vbus: regulator-usb-h1-vbus {
@@ -64,6 +65,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&rmii_clk>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&rmii_clk>;
+};
+
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
@@ -297,11 +305,6 @@
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 	phy-handle = <&phy>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&rmii_clk>,
-		 <&clks IMX6QDL_CLK_ENET_REF>;
-	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts
index 6b6e6fcdea9c..fa823988312d 100644
--- a/arch/arm/boot/dts/imx6dl-lanmcu.dts
+++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts
@@ -21,6 +21,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	backlight: backlight {
@@ -109,14 +110,17 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clock_ksz8081>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts
index c52e6caf3996..e98046eea7a4 100644
--- a/arch/arm/boot/dts/imx6dl-plybas.dts
+++ b/arch/arm/boot/dts/imx6dl-plybas.dts
@@ -75,6 +75,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_5v0: regulator-5v0 {
@@ -99,6 +100,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -116,10 +124,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
index 522660c912a0..e3c10483f33b 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -84,6 +84,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -173,6 +174,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -254,10 +262,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts
index 1f8cddd83ccb..5f4fa796ca18 100644
--- a/arch/arm/boot/dts/imx6dl-prtmvt.dts
+++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts
@@ -193,6 +193,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_1v8: regulator-1v8 {
@@ -293,8 +294,10 @@
 };
 
 &clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
 };
 
 &ecspi1 {
@@ -314,10 +317,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rmii_phy>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index 72df1dba83be..23274be08e61 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -54,6 +54,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	rotary-encoder {
@@ -134,6 +135,13 @@
 	};
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &ecspi2 {
 	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -182,10 +190,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rmii_phy>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index aacbf317feea..3be38a3c4bb1 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -98,7 +98,6 @@
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		status = "okay";
 	};
 };
 
@@ -106,8 +105,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
 	status = "okay";
 
@@ -131,6 +128,7 @@
 		switch@10 {
 			compatible = "qca,qca8334";
 			reg = <10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
 				#address-cells = <1>;
@@ -270,9 +268,9 @@
 		compatible = "ti,lp5562";
 		reg = <0x30>;
 		clock-mode = /bits/ 8 <1>;
-		status = "disabled";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 
 		led@0 {
 			chan-name = "R";
@@ -303,7 +301,6 @@
 		compatible = "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <64>;
-		status = "okay";
 	};
 
 	touchscreen: touchscreen@5c {
@@ -313,7 +310,7 @@
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
-		reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		touchscreen-size-x = <800>;
 		touchscreen-size-y = <480>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts
new file mode 100644
index 000000000000..5c2cd517589b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Lynx i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts
new file mode 100644
index 000000000000..e0292f11d03e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Phoenix i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&aliases {
+	/delete-property/ ethernet1;
+};
+
+&gpio_keys {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&switch_ports {
+	/delete-node/ port@2;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi
new file mode 100644
index 000000000000..52a0f6ee426f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases: aliases {
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 32 64 128 255>;
+		default-brightness-level = <32>;
+		num-interpolated-steps = <8>;
+		power-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		button {
+			label = "Factory RESET";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "dataimage,scf0700c48ggu18";
+		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&sw2_reg>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy0: port@0 {
+					reg = <0>;
+					label = "cpu";
+					phy-mode = "rgmii-id";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				eth2: port@1 {
+					reg = <1>;
+					label = "eth2";
+					phy-handle = <&phy_port1>;
+				};
+
+				eth1: port@2 {
+					reg = <2>;
+					label = "eth1";
+					phy-handle = <&phy_port2>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port1: switchphy@11 {
+					reg = <0x11>;
+				};
+
+				phy_port2: switchphy@12 {
+					reg = <0x12>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze200";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vsnvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	leds: led-controller@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		clock-mode = /bits/ 8 <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		led@0 {
+			chan-name = "R";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			chan-name = "G";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			chan-name = "B";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+	};
+
+	touchscreen: touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		status = "disabled";
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+
+	oled_1309: oled@3c {
+		compatible = "solomon,ssd1309fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,segment-no-remap;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	oled_1305: oled@3d {
+		compatible = "solomon,ssd1305fb-i2c";
+		reg = <0x3d>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_oled: gpio@41 {
+		compatible = "nxp,pca9536";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x41>;
+		vcc-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	touchkeys: keys@5a {
+		compatible = "fsl,mpr121-touchkey";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchkeys>;
+		reg = <0x5a>;
+		vdd-supply = <&sw2_reg>;
+		autorepeat;
+		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+		poll-interval = <50>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07                  0x1b0b0
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
+		>;
+	};
+
+	pinctrl_touchkeys: touchkeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b098
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b098
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <109>;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts
index 349959d38020..54a57a4548e2 100644
--- a/arch/arm/boot/dts/imx6q-prtwd2.dts
+++ b/arch/arm/boot/dts/imx6q-prtwd2.dts
@@ -22,6 +22,13 @@
 		reg = <0x80000000 0x20000000>;
 	};
 
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
 	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -49,13 +56,17 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>;
-	clock-names = "ipg", "ahb";
 	status = "okay";
 
 	fixed-link {
diff --git a/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts
new file mode 100644
index 000000000000..ec6651ba4ba2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
index 3def1b621c8e..2731faede1cb 100644
--- a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
@@ -105,6 +105,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -232,13 +233,16 @@
 	};
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-mode = "rmii";
 	phy-supply = <&reg_3v3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 41e08fa23cce..b72ec745f6d1 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1049,8 +1049,8 @@
 				clocks = <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET_REF>,
-					 <&clks IMX6QDL_CLK_ENET_REF>;
-				clock-names = "ipg", "ahb", "ptp", "enet_out";
+					 <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+				clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
 				fsl,stop-mode = <&gpr 0x34 27>;
 				nvmem-cells = <&fec_mac_addr>;
 				nvmem-cell-names = "mac-address";
diff --git a/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts
new file mode 100644
index 000000000000..4a961a33bf2d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus+ i.MX6QuadPlus board";
+	compatible = "ysoft,imx6qp-yapp4-pegasus-plus", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index da1399057634..815119c12bd4 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -625,6 +625,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/imx6sl-tolino-vision.dts
new file mode 100644
index 000000000000..2694fe18a91b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-vision.dts
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Tolino Vison ebook reader
+ *
+ * Name on mainboard is: 37NB-E60Q30+4A3
+ * Serials start with: 6032
+ *
+ * Copyright 2023 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Tolino Vision";
+	compatible = "kobo,tolino-vision", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			/* magnetic sensor in the corner next to the uSD slot */
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-fl {
+			label = "Frontlight";
+			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BRIGHTNESS_CYCLE>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			/* LED on home button */
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* LED on power button */
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	touchscreen@15 {
+		compatible = "elan,ektf2132";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		power-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio5 6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	accelerometer@1d {
+		compatible = "fsl,mma8652";
+		reg = <0x1d>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ec: embedded-controller@43 {
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ec>;
+		interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+	};
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* J9 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* removable uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/* CyberTan WC121 (BCM43362) SDIO WiFi */
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc4_sleep>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+
+	/* internal eMMC */
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
+	pinctrl_ec: ecgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11  0x17000
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x110B0
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x110B0
+			MX6SL_PAD_KEY_COL1__GPIO3_IO26  0x11030
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07    0x17059
+			MX6SL_PAD_SD1_DAT7__GPIO5_IO10    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13	0x110B0
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06	0x1B0B1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6SL_PAD_SD2_DAT4__GPIO5_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x17059
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x13059
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x17059
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x17059
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x17059
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x17059
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x17059
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x17059
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x17059
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x17059
+			MX6SL_PAD_FEC_REF_CLK__SD4_RESET	0x17068
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170b9
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130b9
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170b9
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170b9
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170b9
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170b9
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170b9
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170b9
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170b9
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170f9
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130f9
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170f9
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170f9
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170f9
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170f9
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170f9
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170f9
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170f9
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4_sleep: usdhc4-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x100c1
+			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x100c1
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x100c1
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x100c1
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18		0x100c1
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24		0x100c1
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23		0x100c1
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17		0x100c1
+			MX6SL_PAD_FEC_TX_EN__GPIO4_IO22		0x100c1
+			MX6SL_PAD_FEC_TXD1__GPIO4_IO16		0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts
index c18390f238e1..b7c96fbe7a91 100644
--- a/arch/arm/boot/dts/imx6ul-prti6g.dts
+++ b/arch/arm/boot/dts/imx6ul-prti6g.dts
@@ -26,6 +26,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet1_ref_pad";
 	};
 
 	leds {
@@ -60,6 +61,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&clock_ksz8081_out>;
+	clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "enet1_ref_pad";
+	assigned-clocks = <&clks IMX6UL_CLK_ENET1_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081_out>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -85,12 +93,6 @@
 	pinctrl-0 = <&pinctrl_eth1>;
 	phy-mode = "rmii";
 	phy-handle = <&rmii_phy>;
-	clocks = <&clks IMX6UL_CLK_ENET>,
-		 <&clks IMX6UL_CLK_ENET_AHB>,
-		 <&clks IMX6UL_CLK_ENET_PTP>,
-		 <&clock_ksz8081_out>;
-	clock-names = "ipg", "ahb", "ptp",
-		      "enet_clk_ref";
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index f0a9139748b8..3d9d0f823568 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -531,10 +531,9 @@
 				clocks = <&clks IMX6UL_CLK_ENET>,
 					 <&clks IMX6UL_CLK_ENET_AHB>,
 					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
-					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
+					 <&clks IMX6UL_CLK_ENET2_REF_SEL>;
 				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
+					      "enet_clk_ref";
 				fsl,num-tx-queues = <1>;
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 4>;
@@ -879,10 +878,9 @@
 				clocks = <&clks IMX6UL_CLK_ENET>,
 					 <&clks IMX6UL_CLK_ENET_AHB>,
 					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET_REF>,
-					 <&clks IMX6UL_CLK_ENET_REF>;
+					 <&clks IMX6UL_CLK_ENET1_REF_SEL>;
 				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
+					      "enet_clk_ref";
 				fsl,num-tx-queues = <1>;
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 3>;
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index bf64ba84b358..fde8a19aac0f 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -33,15 +33,9 @@
 		self-powered;
 		type = "micro";
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				usb_dr_connector: endpoint {
-					remote-endpoint = <&usb1_drd_sw>;
-				};
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi
new file mode 100644
index 000000000000..3fdece5bd31f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2; /* eMMC */
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&pinctrl_emmc_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_dcdc_3v3: regulator-dcdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "dcdc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_status_leds>;
+
+		led-1 {
+			function = LED_FUNCTION_BOOT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_PROGRAMMING;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_motor
+		     &pinctrl_adc_cp
+		     &pinctrl_adc_pp>;
+	vref-supply = <&vgen1_reg>;
+	status = "okay";
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	num-cs = <3>;
+	cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH
+		    &gpio3 2  GPIO_ACTIVE_HIGH
+		    &gpio3 4  GPIO_ACTIVE_HIGH>;
+};
+
+&ecspi4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	num-cs = <1>;
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1
+		     &pinctrl_enet1_phy_rst
+		     &pinctrl_enet_mdio>;
+	phy-supply = <&reg_dcdc_3v3>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy_int>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			max-speed = <100>;
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 10 */
+			  "",
+			  "",
+			  "CP_INVERT",
+			  "",
+			  "",				/* 15 */
+			  "",
+			  "",
+			  "",
+			  "MOTOR_1_FAULT_N",
+			  "",				/* 20 */
+			  "",
+			  "ROTARY_SWITCH_1_2_N",
+			  "ROTARY_SWITCH_1_4_N",
+			  "ROTARY_SWITCH_1_8_N",
+			  "MOTOR_2_FAULT_N";		/* 25 */
+};
+
+&gpio3 {
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "EXT_GPIO",
+			  "MOTOR_1_DRIVER_IN1_N",
+			  "MOTOR_1_DRIVER_IN2",
+			  "MOTOR_2_DRIVER_IN1",
+			  "STM32_BOOT0",		/* 10 */
+			  "STM32_RST_N",
+			  "RELAY_1_ENABLE",
+			  "RELAY_2_ENABLE",
+			  "",
+			  "",				/* 15 */
+			  "QCA700X_MAINS_BOOTLOADER_N",
+			  "QCA700X_CP_RST_N",
+			  "QCA700X_CP_BOOTLOADER_N",
+			  "",
+			  "DIGITAL_OUT_1",		/* 20 */
+			  "DIGITAL_OUT_2",
+			  "DIGITAL_OUT_3",
+			  "DIGITAL_OUT_4",
+			  "DIGITAL_OUT_5",
+			  "DIGITAL_OUT_6",		/* 25 */
+			  "ROTARY_SWITCH_2_8_N",
+			  "ROTARY_SWITCH_2_4_N",
+			  "ROTARY_SWITCH_2_2_N";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 10 */
+			  "",
+			  "",
+			  "BOARD_VARIANT_1",
+			  "BOARD_VARIANT_2",
+			  "BOARD_VARIANT_0",		/* 15 */
+			  "BOARD_VARIANT_3",
+			  "",
+			  "ROTARY_SWITCH_2_1_N",
+			  "",
+			  "DIGITAL_IN_5",		/* 20 */
+			  "",
+			  "",
+			  "DIGITAL_IN_6",
+			  "",
+			  "DIGITAL_IN_1",		/* 25 */
+			  "DIGITAL_IN_2",
+			  "DIGITAL_IN_4",
+			  "DIGITAL_IN_3";
+
+	pmic-int-hog {
+		gpio-hog;
+		gpios = <19 0>;
+		input;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "ROTARY_SWITCH_1_1_N",	/* 0 */
+			  "",
+			  "RELAY_2_SENSE",
+			  "RELAY_1_SENSE",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "QCA700X_MAINS_RST_N",
+			  "MOTOR_2_DRIVER_IN2",
+			  "",
+			  "CP_POSITIVE_PEAK_RST",	/* 10 */
+			  "CP_NEGATIVE_PEAK_RST";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze3001: pmic@8 {
+		compatible = "fsl,pfuze3001";
+		reg = <0x08>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-name = "SW1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "SW2";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-name = "SW3";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-name = "VSNVS";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-name = "VLDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-name = "VLDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-name = "VCCSD";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-name = "V33";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-name = "VLDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-name = "VLDO4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	onewire@18 {
+		compatible = "maxim,ds2484";
+		reg = <0x18>;
+	};
+
+	accelerometer@19 {
+		compatible = "st,iis328dq", "st,h3lis331dl-accel";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>;
+		vdd-supply = <&reg_dcdc_3v3>;
+		vddio-supply = <&reg_dcdc_3v3>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_var
+		     &pinctrl_digital_input
+		     &pinctrl_digital_output
+		     &pinctrl_gpio_motor
+		     &pinctrl_hog_pins
+		     &pinctrl_rotary_switch1
+		     &pinctrl_rotary_switch2>;
+
+	pinctrl_adc_cp: adc-cpgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02            0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03            0xb0
+		>;
+	};
+
+	pinctrl_adc_motor: adc-motorgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00            0xb0
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01            0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04            0xb0
+		>;
+	};
+
+	pinctrl_adc_pp: adc-ppgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05            0xb0
+		>;
+	};
+
+	pinctrl_board_var: board-vargrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__GPIO4_IO15              0xb0
+			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13            0xb0
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14            0xb0
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16              0xb0
+		>;
+	};
+
+	pinctrl_digital_input: digital-inputgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25            0xb0
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26            0xb0
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28            0xb0
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27            0xb0
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20             0xb0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23            0xb0
+		>;
+	};
+
+	pinctrl_digital_output: digital-outputgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA15__GPIO3_IO20            0x400000b0
+			MX6UL_PAD_LCD_DATA16__GPIO3_IO21            0x400000b0
+			MX6UL_PAD_LCD_DATA17__GPIO3_IO22            0x400000b0
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23            0x400000b0
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24            0x400000b0
+			MX6UL_PAD_LCD_DATA20__GPIO3_IO25            0x400000b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29         0x10b0
+			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02             0xb0
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04             0xb0
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK        0x10b0
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO        0x10b0
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI        0x10b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15           0x10b0
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK       0x10b0
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO         0x10b0
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI          0x10b0
+		>;
+	};
+
+	pinctrl_emmc_rst: emmc-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10              0x400010b0
+		>;
+	};
+
+	pinctrl_enet_mdio: enet-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO            0x10b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC             0x10b0
+		>;
+	};
+
+	pinctrl_enet1_phy_int: enet1-phy-intgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07           0x10b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00     0x100b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01     0x100b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN          0x100b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1      0x400000b1
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00     0xb0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01     0xb0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN          0xb0
+		>;
+	};
+
+	pinctrl_ext_uart: ext-uartgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX      0xb0
+			MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX         0xb0
+		>;
+	};
+
+	pinctrl_fan_enable: fan-enablegrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05            0x400000b0
+		>;
+	};
+
+	pinctrl_gpio_motor: gpio-motorgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07            0x400000b0
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08            0x400000b0
+			MX6UL_PAD_LCD_DATA04__GPIO3_IO09            0x400000b0
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19           0xb0
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25         0xb0
+		>;
+	};
+
+	pinctrl_hog_pins: hog-pinsgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA07__GPIO3_IO12            0x400000b0
+			MX6UL_PAD_LCD_DATA08__GPIO3_IO13            0x400000b0
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13              0x400070a0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10            0x400000b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11            0x400000b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA           0x400008b0
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL           0x400008b0
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21         0x400008b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20         0x400008b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT        0x70b1
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19             0xb0
+		>;
+	};
+
+	pinctrl_pwm_cp: pinctrl-pwm-cpgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT             0x60a0
+		>;
+	};
+
+	pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__PWM2_OUT              0xb0
+		>;
+	};
+
+	pinctrl_pwm_fan: pwm-fangrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__PWM7_OUT                0x60a0
+		>;
+	};
+
+	pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA13__GPIO3_IO18            0x400000b0
+		>;
+	};
+
+	pinctrl_qca700x_cp_int: qca700x-cp-intgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_DATA1__GPIO2_IO19             0x10b0
+		>;
+	};
+
+	pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17            0x400000b0
+		>;
+	};
+
+	pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA11__GPIO3_IO16            0x400000b0
+		>;
+	};
+
+	pinctrl_rotary_switch1: rotary-switch1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22           0xb0
+			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23           0xb0
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24         0xb0
+		>;
+	};
+
+	pinctrl_rotary_switch2: rotary-switch2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18            0xb0
+			MX6UL_PAD_LCD_DATA23__GPIO3_IO28            0xb0
+			MX6UL_PAD_LCD_DATA22__GPIO3_IO27            0xb0
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26            0xb0
+		>;
+	};
+
+	pinctrl_rs485_1: rs485-1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18           0xb0
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX       0xb0
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX       0xb0
+		>;
+	};
+
+	pinctrl_rs485_2: rs485-2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24            0x10b0
+			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX          0x10b0
+			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX          0x10b0
+		>;
+	};
+
+	pinctrl_status_leds: status-ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA09__GPIO3_IO14            0xb0
+			MX6UL_PAD_LCD_DATA10__GPIO3_IO15            0xb0
+			MX6UL_PAD_LCD_DATA14__GPIO3_IO19            0xb0
+		>;
+	};
+
+	pinctrl_stm32: stm32grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX      0x10b0
+			MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX      0x10b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DTE_RX             0xb0
+			MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX          0xb0
+		>;
+	};
+
+	pinctrl_usb: usbgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USB_OTG1_OC              0x70b0
+			MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID         0x70b0
+		>;
+	};
+
+	pinctrl_usb_pwr: usb-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USB_OTG1_PWR             0xb0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x7071
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x7071
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x7071
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x7071
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x7071
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x7071
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x7071
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x7071
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x7071
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x7071
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70b1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70b1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70b1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70b1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70b1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70b1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70b1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70b1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70b1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70b1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70f1
+		>;
+	};
+
+	pinctrl_wdog2: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B           0x10b0
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default_snvs";
+	pinctrl-0 = <&pinctrl_cp_peak_snvs
+		     &pinctrl_gpio_motor_snvs
+		     &pinctrl_relay_sense_snvs
+		     &pinctrl_rotary_switch1_snvs>;
+
+	pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05         0x130a0
+		>;
+	};
+
+	pinctrl_cp_peak_snvs: cp-peak-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10           0x130a0
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11           0x130a0
+		>;
+	};
+
+	pinctrl_enet1_phy_rst: enet1-phy-rstgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06         0x100a0
+		>;
+	};
+
+	pinctrl_fan_sense_snvs: fan-sense-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01         0x100a0
+		>;
+	};
+
+	pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08         0x110a0
+		>;
+	};
+
+	pinctrl_qca700x_mains_int: qca700x-mains-intgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09         0x130a0
+		>;
+	};
+
+	pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07         0x400100a0
+		>;
+	};
+
+	pinctrl_relay_sense_snvs: relay-sense-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03         0x100a0
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02         0x100a0
+		>;
+	};
+
+	pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00         0x110a0
+		>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_digital_input_ref>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_cp>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rs485_1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rs485_2>;
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_stm32>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_uart>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb
+		     &pinctrl_usb_pwr>;
+	dr_mode = "host";
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <35>;
+	fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usbphy2 {
+	fsl,tx-cal-45-dn-ohms = <35>;
+	fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&sw2_reg>;
+	vqmmc-supply = <&reg_1v8>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog2>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/imx6ull-tarragon-master.dts
new file mode 100644
index 000000000000..67007ce383e3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-master.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Master";
+	compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull";
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	reg_fan: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "fan-supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_enable>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&ecspi4 {
+	status = "okay";
+
+	qca700x_mains: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_mains_int
+			     &pinctrl_qca700x_mains_rst
+			     &pinctrl_qca700x_mains_btld>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_fan>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts
new file mode 100644
index 000000000000..e471c2005bee
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Micro";
+	compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts
new file mode 100644
index 000000000000..cee223b5f8e1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Slave";
+	compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull";
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts
new file mode 100644
index 000000000000..7fd53b7a4372
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon SlaveXT";
+	compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull";
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	reg_fan: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "fan-supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_enable>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_fan>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 8b2f11e85e05..92cb45dacda6 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "imx7d.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	model = "reMarkable 2.0";
@@ -69,6 +70,17 @@
 		startup-delay-us = <100000>; /* 100 ms */
 	};
 
+	reg_touch: regulator-touch {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_TOUCH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_reg>;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -79,6 +91,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&buck1>;
+};
+
 &clks {
 	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
 			  <&clks IMX7D_CLKO2_ROOT_DIV>;
@@ -106,6 +122,193 @@
 	};
 };
 
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	bd71815: pmic@4b {
+		compatible = "rohm,bd71815";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bd71815>;
+		interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		clocks = <&clks IMX7D_CLKO2_ROOT_SRC>;
+		clock-output-names = "bd71815-32k-out";
+		#clock-cells = <0>;
+		#gpio-cells = <2>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2: buck2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3: buck3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: buck4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: ldo3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: ldo4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: ldo5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6: ldodvref {
+				regulator-name = "ldodvref";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: ldolpsr {
+				regulator-name = "ldolpsr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			boost: wled {
+				regulator-name = "wled";
+				regulator-min-microamp = <10>;
+				regulator-max-microamp = <25000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_touch>;
+		touchscreen-size-x = <880>;
+		touchscreen-size-y = <1280>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			reg = <0>;
+			linux,keycodes = <KEY_HOMEPAGE>;
+		};
+
+		button@1 {
+			reg = <1>;
+			linux,keycodes = <KEY_MENU>;
+		};
+
+		button@2 {
+			reg = <2>;
+			linux,keycodes = <KEY_BACK>;
+		};
+
+		button@3 {
+			reg = <3>;
+			linux,keycodes = <KEY_SEARCH>;
+		};
+
+		button@4 {
+			reg = <4>;
+			linux,keycodes = <KEY_VOLUMEDOWN>;
+		};
+
+		button@5 {
+			reg = <5>;
+			linux,keycodes = <KEY_VOLUMEUP>;
+		};
+
+		button@6 {
+			reg = <6>;
+			linux,keycodes = <KEY_CAMERA>;
+		};
+
+		button@7 {
+			reg = <7>;
+			linux,keycodes = <KEY_POWER>;
+		};
+	};
+};
+
 &i2c4 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "sleep";
@@ -118,8 +321,6 @@
 		reg = <0x62>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_epdpmic>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		#thermal-sensor-cells = <0>;
 		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
 
@@ -218,6 +419,12 @@
 };
 
 &iomuxc {
+	pinctrl_bd71815: bd71815grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x59
+		>;
+	};
+
 	pinctrl_brcm_reg: brcmreggrp {
 		fsl,pins = <
 			/* WIFI_PWR_EN */
@@ -232,6 +439,15 @@
 		>;
 	};
 
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* CYTTSP interrupt */
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x54
+			/* CYTTSP reset */
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x04
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
@@ -239,6 +455,20 @@
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
@@ -246,6 +476,13 @@
 		>;
 	};
 
+	pinctrl_touch_reg: touchreggrp {
+		fsl,pins = <
+			/* TOUCH_PWR_EN */
+			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x14
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 7ceb7c09f7ad..4b94b8afb55d 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -165,6 +165,15 @@
 		  reg = <0x306d0000 0x10000>;
 		  status = "disabled";
 	};
+
+	pxp: pxp@30700000 {
+		compatible = "fsl,imx7d-pxp";
+		reg = <0x30700000 0x10000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_PXP_CLK>;
+		clock-names = "axi";
+	};
 };
 
 &aips3 {
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index 7f7d2d5122fb..f91bf719d4e2 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -189,7 +189,7 @@
 		};
 
 		usbotg1: usb@40330000 {
-			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
 			reg = <0x40330000 0x200>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
@@ -202,7 +202,8 @@
 		};
 
 		usbmisc1: usbmisc@40330200 {
-			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc";
+			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
 			#index-cells = <1>;
 			reg = <0x40330200 0x200>;
 		};
diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
index bd4230d7dac9..765ab36e6f0c 100644
--- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
@@ -56,7 +56,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Coyote PCI boardfile.
@@ -80,7 +80,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -102,7 +102,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
index 92b987bc3f99..6f5b4e4eb1cc 100644
--- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
@@ -112,7 +112,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Vulcan PCI boardfile.
@@ -137,7 +137,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -159,7 +159,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
index 5ab09fb10dae..b9d46eb06507 100644
--- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
@@ -122,7 +122,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
index b740403b05a9..5a5e16cc7335 100644
--- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
@@ -159,7 +159,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Written based on the FSG-3 PCI boardfile.
@@ -187,7 +187,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -209,7 +209,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
index b7cbc90e1c18..4d70f6afd13a 100644
--- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
@@ -53,7 +53,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
@@ -74,7 +74,7 @@
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -91,7 +91,7 @@
 		};
 
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
index a5943f51e8c2..97e3f25bb210 100644
--- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
@@ -108,7 +108,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Avila PCI boardfile.
@@ -142,7 +142,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -164,7 +164,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
index f80388b17a9e..9ec0169bacf8 100644
--- a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
@@ -82,7 +82,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
@@ -148,7 +148,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 32>;
 			phy-mode = "rgmii";
@@ -170,7 +170,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 33>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
index cbc87b344f6a..8da6823e1dbe 100644
--- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
@@ -109,7 +109,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
@@ -129,7 +129,7 @@
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
index beaadda4685f..194945748dc3 100644
--- a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
@@ -40,7 +40,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -62,7 +62,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
index f17cab12a64b..7011fea6205b 100644
--- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
@@ -61,7 +61,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from IXDPG425 PCI boardfile.
@@ -95,7 +95,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -117,7 +117,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
index 0edc5928e00b..da1e93212b86 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
@@ -116,7 +116,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
@@ -143,7 +143,7 @@
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
index 5e7e31b74b04..4aba9e0214a0 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
@@ -117,7 +117,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
@@ -141,7 +141,7 @@
 		 * Do we need a new binding and property for this?
 		 */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -165,7 +165,7 @@
 
 		/* EthC - connected to KS8995 switch port 5 */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
index df2ca6d95ee5..19d56e9aec9d 100644
--- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
@@ -54,7 +54,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
@@ -77,7 +77,7 @@
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
index b444003c10e1..c550c421b659 100644
--- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
@@ -79,7 +79,7 @@
 
 		/* LAN port */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
index cf4010d60187..1db849515f9e 100644
--- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
+++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
@@ -121,7 +121,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * In the boardfile for the Cambria from OpenWRT the interrupts
@@ -167,7 +167,7 @@
 		};
 
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
@@ -188,7 +188,7 @@
 		};
 
 		ethernet@c800c000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 2>;
 			queue-txready = <&qmgr 19>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
index 3d7cfa1a5ed4..4703a8b24765 100644
--- a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
+++ b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
@@ -36,7 +36,7 @@
 
 		/* CHECKME: ethernet set-up taken from Gateworks Cambria */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
@@ -57,7 +57,7 @@
 		};
 
 		ethernet@c800c000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 2>;
 			queue-txready = <&qmgr 19>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
index 146352ba848b..31c0a69771c4 100644
--- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
+++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
@@ -99,7 +99,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from IXDP425 PCI boardfile.
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 5d6d074011df..abd5aef8b87d 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -159,7 +159,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 88be868cf71e..3a87b7943c70 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -534,7 +534,7 @@
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = <&vout_pins>;
-	status = "ok";
+	status = "okay";
 
 	port {
 		dpi_out: endpoint {
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 4352397b4f52..1f762af6f502 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -183,7 +183,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 1c880cf8fa91..3a69f65de81e 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -132,7 +132,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index f9f4b0143ba8..0c0851cd9bec 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -232,7 +232,7 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -251,6 +251,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts
index 60c1e94f5dd3..9fd3581bb24b 100644
--- a/arch/arm/boot/dts/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
@@ -254,7 +254,6 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
 				phy-mode = "rgmii-id";
 				ethernet = <&eth1port>;
 				fixed-link {
@@ -330,6 +329,7 @@
 	ethernet1-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index 2f9660f3b457..27fd6e2337d5 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -198,7 +198,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -221,6 +221,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index ced576acfb95..5a77286136c7 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -149,7 +149,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -166,6 +166,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index e21aa674945d..9d62f910cddf 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -105,7 +105,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 21eb59041a7d..4f22ab451aae 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -506,6 +506,15 @@
 			};
 		};
 
+		sdxc_a_pins: sdxc-a {
+			mux {
+				groups = "sdxc_d0_a", "sdxc_d13_a",
+					 "sdxc_clk_a", "sdxc_cmd_a";
+				function = "sdxc_a";
+				bias-pull-up;
+			};
+		};
+
 		sdxc_b_pins: sdxc-b {
 			mux {
 				groups = "sdxc_d0_b", "sdxc_d13_b",
@@ -568,6 +577,14 @@
 				bias-disable;
 			};
 		};
+
+		xtal_32k_out_pins: xtal-32k-out {
+			mux {
+				groups = "xtal_32k_out";
+				function = "xtal";
+				bias-disable;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index d5a3fe21e8e7..5979209fe91e 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -580,8 +580,8 @@
 };
 
 &gpio_intc {
-	compatible = "amlogic,meson-gpio-intc",
-		     "amlogic,meson8b-gpio-intc";
+	compatible = "amlogic,meson8b-gpio-intc",
+		     "amlogic,meson-gpio-intc";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index fa6d55f1cfb9..aa4d4bf70629 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -19,7 +19,6 @@
 		ethernet0 = &ethmac;
 		i2c0 = &i2c_AO;
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		mmc0 = &sd_card_slot;
 	};
 
@@ -45,12 +44,32 @@
 		};
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		pinctrl-0 = <&xtal_32k_out_pins>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>,
+			      <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&xtal_32k_out>;
+		clock-names = "ext_clock";
+	};
+
 	vcc_3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	xtal_32k_out: xtal-32k-out-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k_out";
+	};
 };
 
 &cpu0 {
@@ -192,6 +211,27 @@
 	vref-supply = <&vddio_ao1v8>;
 };
 
+/* SDIO wifi */
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_a_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	disable-wp;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
 &sdio {
 	status = "okay";
 
@@ -222,6 +262,12 @@
 	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
 };
 
 &uart_AO {
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 0a0fe8c5a405..ce6a4015fed5 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -359,7 +359,7 @@
 		mediatek,apmixedsys = <&apmixedsys>;
 	};
 
-	nandc: nfi@1100d000 {
+	nandc: nand-controller@1100d000 {
 		compatible = "mediatek,mt2701-nfc";
 		reg = <0 0x1100d000 0 0x1000>;
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 5008115d2494..ece61a6a7a89 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -322,6 +322,12 @@
 	vqmmc-supply = <&reg_3p3v>;
 };
 
+&mt6323keys {
+	home {
+		status = "disabled";
+	};
+};
+
 &mt6323_leds {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
index 1e96c865d41d..8adc0ef01f6c 100644
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -14,7 +14,7 @@
 	 * they probably share the same GPIO IRQ
 	 * REVISIT: Add timing support from slls644g.pdf
 	 */
-	uart@3,0 {
+	serial@3,0 {
 		compatible = "ns16550a";
 		reg = <3 0 8>;	/* CS3, offset 0, IO size 8 */
 		bank-width = <2>;
@@ -50,7 +50,7 @@
 		gpmc,wr-data-mux-bus-ns = <45>;
 		gpmc,wr-access-ns = <145>;
 	};
-	uart@3,1 {
+	serial@3,1 {
 		compatible = "ns16550a";
 		reg = <3 0x100 8>;	/* CS3, offset 0x100, IO size 8 */
 		bank-width = <2>;
@@ -61,7 +61,7 @@
 		clock-frequency = <1843200>;
 		current-speed = <115200>;
 	};
-	uart@3,2 {
+	serial@3,2 {
 		compatible = "ns16550a";
 		reg = <3 0x200 8>;	/* CS3, offset 0x200, IO size 8 */
 		bank-width = <2>;
@@ -72,7 +72,7 @@
 		clock-frequency = <1843200>;
 		current-speed = <115200>;
 	};
-	uart@3,3 {
+	serial@3,3 {
 		compatible = "ns16550a";
 		reg = <3 0x300 8>;	/* CS3, offset 0x300, IO size 8 */
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 35eced6521ef..1a085bc01317 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 48e48b0c8190..e1b1a047f77a 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "CompuLab CM-T3730";
-	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
 
 	wl12xx_vmmc2: wl12xx_vmmc2 {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 87e0ab1bbe95..4183fde46059 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -11,8 +11,7 @@
 
 / {
 	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3";
-
+	compatible = "goldelico,gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
@@ -612,6 +611,22 @@
 	clock-frequency = <100000>;
 };
 
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index 9dca5bfc87ab..eadb5b857f48 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3";
 
 	/* Regulator to trigger the WL_EN signal of the Wifi module */
 	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index c6f863bc03ad..3f0197ceae09 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3";
 
 	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index 8e9c12cf51a7..bc95a8df2e6a 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3";
 
 	/* Regulator to trigger the WL_EN signal of the Wifi module */
 	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 5188f96f431e..d36ceecb7328 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3";
 
 	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
index ecb4ef738e07..f6bbea2be54c 100644
--- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts
+++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "INCOstartec LILLY-DBB056 (DM3730)";
-	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap3";
 };
 
 &twl {
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index d211bcc31174..a3cf3f443785 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -12,7 +12,7 @@
 
 / {
 	model = "Nokia N9";
-	compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap3";
 };
 
 &i2c2 {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index b2f480022ff6..cbaf79c4e842 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -12,7 +12,7 @@
 
 / {
 	model = "Nokia N950";
-	compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap3";
 
 	keys {
 		compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
index 7f04dfad8203..3eb935df04dc 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
@@ -14,5 +14,5 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
-	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
index bc5a04e03336..3af8d10d7224 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
-	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
index 065c31cbf0e2..813e3c9fe3b6 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
-	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
index e38c1c51392c..8405bd9262de 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
-	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
index e6dc23159c4d..b9558d736e79 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
-	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
index 587c08ce282d..fcfc449f2abe 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
-	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
index f57de6010994..6d14466c180a 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
@@ -14,6 +14,6 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
-	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
index 281af6c113be..bcf20ff3f281 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
@@ -14,5 +14,5 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
-	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
index ea509956d7ac..c0252f8a798a 100644
--- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts
+++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
@@ -16,7 +16,7 @@
 / {
 	model = "Pandora Handheld Console 1GHz";
 
-	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
index eb3893b9535e..4c36bde62491 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "CompuLab SBC-T3730 with CM-T3730";
-	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
 
 	aliases {
 		display0 = &dvi0;
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
index b6879cdc5c13..0591af494184 100644
--- a/arch/arm/boot/dts/omap3-sniper.dts
+++ b/arch/arm/boot/dts/omap3-sniper.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "LG Optimus Black";
-	compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index ce58b1f208e8..ab52e8d68f76 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "TI Zoom3";
-	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
index 4f4888ec9138..fb203e7d37f5 100644
--- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
+++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
@@ -137,8 +137,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "cpu";
 				ethernet = <&ethport>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 
 			port@5 {
@@ -208,6 +212,7 @@
 		/* Hardwired to DSA switch */
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
deleted file mode 100644
index c59e06ff2423..000000000000
--- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-#include "ox810se.dtsi"
-
-/ {
-	model = "Western Digital My Book World Edition";
-
-	compatible = "wd,mbwe", "oxsemi,ox810se";
-
-	chosen {
-		bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x48000000 0x8000000>;
-	};
-
-	aliases {
-		serial1 = &uart1;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		power {
-			label = "power";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x198>;
-		};
-
-		recovery {
-			label = "recovery";
-			gpios = <&gpio0 4 1>;
-			linux,code = <0xab>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		a0 {
-			label = "activity0";
-			gpios = <&gpio0 25 0>;
-			default-state = "keep";
-		};
-
-		a1 {
-			label = "activity1";
-			gpios = <&gpio0 26 0>;
-			default-state = "keep";
-		};
-
-		a2 {
-			label = "activity2";
-			gpios = <&gpio0 5 0>;
-			default-state = "keep";
-		};
-
-		a3 {
-			label = "activity3";
-			gpios = <&gpio0 6 0>;
-			default-state = "keep";
-		};
-
-		a4 {
-			label = "activity4";
-			gpios = <&gpio0 7 0>;
-			default-state = "keep";
-		};
-
-		a5 {
-			label = "activity5";
-			gpios = <&gpio1 2 0>;
-			default-state = "keep";
-		};
-	};
-
-	i2c-gpio {
-		compatible = "i2c-gpio";
-		gpios = <&gpio0 3 0 /* sda */
-			 &gpio0 2 0 /* scl */
-			 >;
-		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc0: rtc@48 {
-			compatible = "st,m41t00";
-			reg = <0x68>;
-		};
-	};
-};
-
-&etha {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-};
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
deleted file mode 100644
index 96c0745f7b70..000000000000
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ /dev/null
@@ -1,357 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/clock/oxsemi,ox810se.h>
-#include <dt-bindings/reset/oxsemi,ox810se.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "oxsemi,ox810se";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			clocks = <&armclk>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* Max 256MB @ 0x48000000 */
-		reg = <0x48000000 0x10000000>;
-	};
-
-	clocks {
-		osc: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gmacclk: gmacclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		rpsclk: rpsclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&osc>;
-		};
-
-		pll400: pll400 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <733333333>;
-		};
-
-		sysclk: sysclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&pll400>;
-		};
-
-		armclk: armclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&pll400>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc>;
-
-		etha: ethernet@40400000 {
-			compatible = "oxsemi,ox810se-dwmac", "snps,dwmac";
-			reg = <0x40400000 0x2000>;
-			interrupts = <8>;
-			interrupt-names = "macirq";
-			mac-address = [000000000000]; /* Filled in by U-Boot */
-			phy-mode = "rgmii";
-
-			clocks = <&stdclk 6>, <&gmacclk>;
-			clock-names = "gmac", "stmmaceth";
-			resets = <&reset 6>;
-
-			/* Regmap for sys registers */
-			oxsemi,sys-ctrl = <&sys>;
-
-			status = "disabled";
-		};
-
-		apb-bridge@44000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x44000000 0x1000000>;
-
-			pinctrl: pinctrl {
-				compatible = "oxsemi,ox810se-pinctrl";
-
-				/* Regmap for sys registers */
-				oxsemi,sys-ctrl = <&sys>;
-
-				pinctrl_uart0: uart0 {
-					uart0a {
-						pins = "gpio31";
-						function = "fct3";
-					};
-					uart0b {
-						pins = "gpio32";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart0_modem: uart0_modem {
-					uart0c {
-						pins = "gpio27";
-						function = "fct3";
-					};
-					uart0d {
-						pins = "gpio28";
-						function = "fct3";
-					};
-					uart0e {
-						pins = "gpio29";
-						function = "fct3";
-					};
-					uart0f {
-						pins = "gpio30";
-						function = "fct3";
-					};
-					uart0g {
-						pins = "gpio33";
-						function = "fct3";
-					};
-					uart0h {
-						pins = "gpio34";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart1: uart1 {
-					uart1a {
-						pins = "gpio20";
-						function = "fct3";
-					};
-					uart1b {
-						pins = "gpio22";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart1_modem: uart1_modem {
-					uart1c {
-						pins = "gpio8";
-						function = "fct3";
-					};
-					uart1d {
-						pins = "gpio9";
-						function = "fct3";
-					};
-					uart1e {
-						pins = "gpio23";
-						function = "fct3";
-					};
-					uart1f {
-						pins = "gpio24";
-						function = "fct3";
-					};
-					uart1g {
-						pins = "gpio25";
-						function = "fct3";
-					};
-					uart1h {
-						pins = "gpio26";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart2: uart2 {
-					uart2a {
-						pins = "gpio6";
-						function = "fct3";
-					};
-					uart2b {
-						pins = "gpio7";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart2_modem: uart2_modem {
-					uart2c {
-						pins = "gpio0";
-						function = "fct3";
-					};
-					uart2d {
-						pins = "gpio1";
-						function = "fct3";
-					};
-					uart2e {
-						pins = "gpio2";
-						function = "fct3";
-					};
-					uart2f {
-						pins = "gpio3";
-						function = "fct3";
-					};
-					uart2g {
-						pins = "gpio4";
-						function = "fct3";
-					};
-					uart2h {
-						pins = "gpio5";
-						function = "fct3";
-					};
-				};
-			};
-
-			gpio0: gpio@0 {
-				compatible = "oxsemi,ox810se-gpio";
-				reg = <0x000000 0x100000>;
-				interrupts = <21>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <32>;
-				oxsemi,gpio-bank = <0>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-			};
-
-			gpio1: gpio@100000 {
-				compatible = "oxsemi,ox810se-gpio";
-				reg = <0x100000 0x100000>;
-				interrupts = <22>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <3>;
-				oxsemi,gpio-bank = <1>;
-				gpio-ranges = <&pinctrl 0 32 3>;
-			};
-
-			uart0: serial@200000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <23>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART1>;
-			};
-
-			uart1: serial@300000 {
-			       compatible = "ns16550a";
-			       reg = <0x300000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <24>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART2>;
-			};
-
-			uart2: serial@900000 {
-			       compatible = "ns16550a";
-			       reg = <0x900000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <29>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART3>;
-			};
-
-			uart3: serial@a00000 {
-			       compatible = "ns16550a";
-			       reg = <0xa00000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <30>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART4>;
-			};
-		};
-
-		apb-bridge@45000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x45000000 0x1000000>;
-
-			sys: sys-ctrl@0 {
-				compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
-				reg = <0x000000 0x100000>;
-
-				reset: reset-controller {
-					compatible = "oxsemi,ox810se-reset";
-					#reset-cells = <1>;
-				};
-
-				stdclk: stdclk {
-					compatible = "oxsemi,ox810se-stdclk";
-					#clock-cells = <1>;
-				};
-			};
-
-			rps@300000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "simple-bus";
-				ranges = <0 0x300000 0x100000>;
-
-				intc: interrupt-controller@0 {
-					compatible = "oxsemi,ox810se-rps-irq";
-					interrupt-controller;
-					reg = <0 0x200>;
-					#interrupt-cells = <1>;
-					valid-mask = <0xffffffff>;
-					clear-mask = <0xffffffff>;
-				};
-
-				timer0: timer@200 {
-					compatible = "oxsemi,ox810se-rps-timer";
-					reg = <0x200 0x40>;
-					clocks = <&rpsclk>;
-					interrupts = <4 5>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
deleted file mode 100644
index c3daceccde55..000000000000
--- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-/ {
-	model = "Cloud Engines PogoPlug Series 3";
-
-	compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x60000000 0x8000000>;
-	};
-
-	aliases {
-		serial0 = &uart0;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		blue {
-			label = "pogoplug:blue";
-			gpios = <&gpio0 2 0>;
-			default-state = "keep";
-		};
-
-		orange {
-			label = "pogoplug:orange";
-			gpios = <&gpio1 16 1>;
-			default-state = "keep";
-		};
-
-		green {
-			label = "pogoplug:green";
-			gpios = <&gpio1 17 1>;
-			default-state = "keep";
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0>;
-};
-
-&nandc {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			read-only;
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};
-
-&etha {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_etha_mdio>;
-};
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
deleted file mode 100644
index dde4364892bf..000000000000
--- a/arch/arm/boot/dts/ox820.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/oxsemi,ox820.h>
-#include <dt-bindings/reset/oxsemi,ox820.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "oxsemi,ox820";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "oxsemi,ox820-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			clocks = <&armclk>;
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			clocks = <&armclk>;
-			reg = <1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* Max 512MB @ 0x60000000 */
-		reg = <0x60000000 0x20000000>;
-	};
-
-	clocks {
-		osc: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gmacclk: gmacclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		sysclk: sysclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&osc>;
-		};
-
-		plla: plla {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <850000000>;
-		};
-
-		armclk: armclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&plla>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&gic>;
-
-		nandc: nand-controller@41000000 {
-			compatible = "oxsemi,ox820-nand";
-			reg = <0x41000000 0x100000>;
-			clocks = <&stdclk CLK_820_NAND>;
-			resets = <&reset RESET_NAND>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		etha: ethernet@40400000 {
-			compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
-			reg = <0x40400000 0x2000>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			mac-address = [000000000000]; /* Filled in by U-Boot */
-			phy-mode = "rgmii";
-
-			clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
-			clock-names = "gmac", "stmmaceth";
-			resets = <&reset RESET_MAC>;
-
-			/* Regmap for sys registers */
-			oxsemi,sys-ctrl = <&sys>;
-
-			status = "disabled";
-		};
-
-		apb-bridge@44000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x44000000 0x1000000>;
-
-			pinctrl: pinctrl {
-				compatible = "oxsemi,ox820-pinctrl";
-
-				/* Regmap for sys registers */
-				oxsemi,sys-ctrl = <&sys>;
-
-				pinctrl_uart0: uart0 {
-					uart0 {
-						pins = "gpio30", "gpio31";
-						function = "fct5";
-					};
-				};
-
-				pinctrl_uart0_modem: uart0_modem {
-					uart0_modem_a {
-						pins = "gpio24", "gpio24", "gpio26", "gpio27";
-						function = "fct4";
-					};
-					uart0_modem_b {
-						pins = "gpio28", "gpio29";
-						function = "fct5";
-					};
-				};
-
-				pinctrl_uart1: uart1 {
-					uart1 {
-						pins = "gpio7", "gpio8";
-						function = "fct4";
-					};
-				};
-
-				pinctrl_uart1_modem: uart1_modem {
-					uart1_modem {
-						pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43";
-						function = "fct4";
-					};
-				};
-
-				pinctrl_etha_mdio: etha_mdio {
-					etha_mdio {
-						pins = "gpio3", "gpio4";
-						function = "fct1";
-					};
-				};
-
-				pinctrl_nand: nand {
-					nand {
-						pins = "gpio12", "gpio13", "gpio14", "gpio15",
-						     "gpio16", "gpio17", "gpio18", "gpio19",
-						     "gpio20", "gpio21", "gpio22", "gpio23",
-						     "gpio24";
-						function = "fct1";
-					};
-				};
-			};
-
-			gpio0: gpio@0 {
-				compatible = "oxsemi,ox820-gpio";
-				reg = <0x000000 0x100000>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <32>;
-				oxsemi,gpio-bank = <0>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-			};
-
-			gpio1: gpio@100000 {
-				compatible = "oxsemi,ox820-gpio";
-				reg = <0x100000 0x100000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <18>;
-				oxsemi,gpio-bank = <1>;
-				gpio-ranges = <&pinctrl 0 32 18>;
-			};
-
-			uart0: serial@200000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       clocks = <&sysclk>;
-			       resets = <&reset RESET_UART1>;
-			};
-
-			uart1: serial@300000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       clocks = <&sysclk>;
-			       resets = <&reset RESET_UART2>;
-			};
-
-			rps@400000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "simple-bus";
-				ranges = <0 0x400000 0x100000>;
-
-				intc: interrupt-controller@0 {
-					compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq";
-					interrupt-controller;
-					reg = <0 0x200>;
-					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-					#interrupt-cells = <1>;
-					valid-mask = <0xffffffff>;
-					clear-mask = <0xffffffff>;
-				};
-
-				timer0: timer@200 {
-					compatible = "oxsemi,ox820-rps-timer";
-					reg = <0x200 0x40>;
-					clocks = <&sysclk>;
-					interrupt-parent = <&intc>;
-					interrupts = <4>;
-				};
-			};
-
-			sys: sys-ctrl@e00000 {
-				compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
-				reg = <0xe00000 0x200000>;
-
-				reset: reset-controller {
-					compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset";
-					#reset-cells = <1>;
-				};
-
-				stdclk: stdclk {
-					compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
-					#clock-cells = <1>;
-				};
-			};
-		};
-
-		apb-bridge@47000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x47000000 0x1000000>;
-
-			scu: scu@0 {
-				compatible = "arm,arm11mp-scu";
-				reg = <0x0 0x100>;
-			};
-
-			local-timer@600 {
-				compatible = "arm,arm11mp-twd-timer";
-				reg = <0x600 0x20>;
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
-				clocks = <&armclk>;
-			};
-
-			gic: interrupt-controller@1000 {
-				compatible = "arm,arm11mp-gic";
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				reg = <0x1000 0x1000>,
-				      <0x100 0x500>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index de2fb1c01b6e..b82381229adf 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -27,6 +27,16 @@
 	};
 
 	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x03100000 0x200000>;
+			no-map;
+		};
+
 		adsp_region: adsp@3300000 {
 			reg = <0x03300000 0x1400000>;
 			no-map;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 92aa2b081901..672b246afbba 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -388,21 +388,37 @@
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
 		};
 
 		acc1: clock-controller@2098000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
 		};
 
 		acc2: clock-controller@20a8000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu2_aux";
+			#clock-cells = <0>;
 		};
 
 		acc3: clock-controller@20b8000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu3_aux";
+			#clock-cells = <0>;
 		};
 
 		saw0: power-controller@2089000 {
@@ -879,8 +895,11 @@
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc", "syscon";
+			compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon";
 			reg = <0x2011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
 		};
 
 		rpm: rpm@108000 {
@@ -1260,7 +1279,7 @@
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				opp-320000000 {
+				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 				};
 
@@ -1494,8 +1513,8 @@
 			num-lanes = <1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x81000000 0 0          0x0fe00000 0 0x00100000>, /* I/O */
-				 <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */
+				 <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index fabd7455eb8f..b653ea40c441 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -654,25 +654,25 @@
 			regulator;
 		};
 
-		acc0: clock-controller@f9088000 {
+		acc0: power-manager@f9088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9088000 0x1000>,
 			      <0xf9008000 0x1000>;
 		};
 
-		acc1: clock-controller@f9098000 {
+		acc1: power-manager@f9098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9098000 0x1000>,
 			      <0xf9008000 0x1000>;
 		};
 
-		acc2: clock-controller@f90a8000 {
+		acc2: power-manager@f90a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90a8000 0x1000>,
 			      <0xf9008000 0x1000>;
 		};
 
-		acc3: clock-controller@f90b8000 {
+		acc3: power-manager@f90b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90b8000 0x1000>,
 			      <0xf9008000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
index a5a6f3ebb274..d90b4f4c63af 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
@@ -8,6 +8,14 @@
 	model = "ALFA Network AP120C-AC";
 	compatible = "alfa-network,ap120c-ac", "qcom,ipq4018";
 
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	keys {
 		compatible = "gpio-keys";
 
@@ -68,7 +76,7 @@
 		};
 	};
 
-	usb-power {
+	usb-power-hog {
 		line-name = "USB-power";
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		gpio-hog;
@@ -162,6 +170,17 @@
 				label = "ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			partition@180000 {
@@ -178,7 +197,7 @@
 		};
 	};
 
-	nand@1 {
+	flash@1 {
 		compatible = "spi-nand";
 		reg = <1>;
 		spi-max-frequency = <40000000>;
@@ -225,10 +244,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
 };
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 02e9ea78405d..dfcfb3339c23 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -143,7 +143,6 @@
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			clock-frequency = <32000>;
-			clock-output-names = "gcc_sleep_clk_src";
 			#clock-cells = <0>;
 		};
 
@@ -190,6 +189,8 @@
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x1800000 0x60000>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
 		};
 
 		prng: rng@22000 {
@@ -325,22 +326,22 @@
 			status = "disabled";
 		};
 
-		acc0: clock-controller@b088000 {
+		acc0: power-manager@b088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		acc1: clock-controller@b098000 {
+		acc1: power-manager@b098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		acc2: clock-controller@b0a8000 {
+		acc2: power-manager@b0a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		acc3: clock-controller@b0b8000 {
+		acc3: power-manager@b0b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
 		};
@@ -426,8 +427,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
-				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
+			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
+				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index f908889c4f95..4d509876294b 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -38,8 +38,6 @@
 
 		switch0: switch@10 {
 			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
 
 			dsa,member = <0 0>;
 
@@ -67,26 +65,86 @@
 				port@1 {
 					reg = <1>;
 					label = "sw1";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@2 {
 					reg = <2>;
 					label = "sw2";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@3 {
 					reg = <3>;
 					label = "sw3";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@4 {
 					reg = <4>;
 					label = "sw4";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@5 {
 					reg = <5>;
 					label = "sw5";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 			};
 		};
@@ -105,8 +163,6 @@
 
 		switch1: switch@14 {
 			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
 
 			dsa,member = <1 0>;
 
@@ -134,26 +190,86 @@
 				port@1 {
 					reg = <1>;
 					label = "sw6";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@2 {
 					reg = <2>;
 					label = "sw7";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@3 {
 					reg = <3>;
 					label = "sw8";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@4 {
 					reg = <4>;
 					label = "sw9";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@5 {
 					reg = <5>;
 					label = "sw10";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 52d77e105957..af6764770fd1 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -569,16 +569,20 @@
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc", "syscon";
+			compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
 			reg = <0x02011000 0x1000>;
 			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
 			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu_l2_aux";
+			#clock-cells = <0>;
 		};
 
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
 		};
 
 		saw0: regulator@2089000 {
@@ -590,6 +594,10 @@
 		acc1: clock-controller@2098000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
 		};
 
 		saw1: regulator@2099000 {
@@ -1081,8 +1089,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1132,8 +1140,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1183,8 +1191,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 8e9ea61a1e48..b40c52ddf9b4 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -116,7 +116,7 @@
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc", "syscon";
+			compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
 			reg = <0x02011000 0x1000>;
 		};
 
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index c373081bc21b..42acb9ddb8cc 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8974.h>
@@ -377,6 +378,11 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>;
+			clock-names = "xo",
+				      "sleep_clk";
 		};
 
 		mmcc: clock-controller@fd8c0000 {
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 86f76d0feff4..f601b40ebcf4 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -473,7 +473,7 @@
 		};
 
 		l2cc: clock-controller@2082000 {
-			compatible = "qcom,kpss-gcc", "syscon";
+			compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon";
 			reg = <0x02082000 0x1000>;
 		};
 
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index a0369b38fe07..2a668cd535cc 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -182,8 +182,11 @@
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc", "syscon";
+			compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon";
 			reg = <0x2011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
 		};
 
 		rpm: rpm@108000 {
@@ -204,11 +207,19 @@
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
 		};
 
 		acc1: clock-controller@2098000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
 		};
 
 		saw0: regulator@2089000 {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 834ad95515b1..8208012684d4 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -418,22 +418,22 @@
 			regulator;
 		};
 
-		acc0: clock-controller@f9088000 {
+		acc0: power-manager@f9088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		acc1: clock-controller@f9098000 {
+		acc1: power-manager@f9098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		acc2: clock-controller@f90a8000 {
+		acc2: power-manager@f90a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		acc3: clock-controller@f90b8000 {
+		acc3: power-manager@f90b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 		};
@@ -1057,7 +1057,7 @@
 			#power-domain-cells = <1>;
 			reg = <0xfc400000 0x4000>;
 
-			clocks = <&xo_board>,
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>;
 			clock-names = "xo",
 				      "sleep_clk";
diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
index d5343bb0daee..51058b065279 100644
--- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
@@ -242,6 +242,23 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+
+	status = "okay";
+};
+
+&pcie_rc {
+	perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &qpic_bam {
 	status = "okay";
 };
@@ -261,21 +278,48 @@
 };
 
 &remoteproc_mpss {
-	status = "okay";
 	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
+};
+
+&tlmm {
+	pcie_default: pcie-default-state {
+		clkreq-pins {
+			pins = "gpio56";
+			function = "pcie_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio57";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-pins {
+		       pins = "gpio53";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
 };
 
 &usb_hsphy {
-	status = "okay";
 	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
 	vdda33-supply = <&vreg_l10e_3p1>;
 	vdda18-supply = <&vreg_l5e_bb_1p7>;
+
+	status = "okay";
 };
 
 &usb_qmpphy {
-	status = "okay";
 	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
 	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+
+	status = "okay";
 };
 
 &usb {
diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index ad74ecc2a196..8fadc6e70692 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -242,19 +242,22 @@
 	status = "okay";
 };
 
-&pcie0_phy {
-	status = "okay";
-
+&pcie_phy {
 	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
 	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
-};
 
-&pcie_ep {
 	status = "okay";
+};
 
+&pcie_ep {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
 		     &pcie_ep_wake_default>;
+
+	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &qpic_bam {
@@ -277,8 +280,8 @@
 };
 
 &remoteproc_mpss {
-	status = "okay";
 	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
 };
 
 &tlmm {
@@ -305,16 +308,18 @@
 };
 
 &usb_hsphy {
-	status = "okay";
 	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
 	vdda33-supply = <&vreg_l10e_3p1>;
 	vdda18-supply = <&vreg_l5e_bb_1p7>;
+
+	status = "okay";
 };
 
 &usb_qmpphy {
-	status = "okay";
 	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
 	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+
+	status = "okay";
 };
 
 &usb {
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index df7303c5c843..342c3d14001e 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -304,7 +304,135 @@
 			status = "disabled";
 		};
 
-		pcie0_phy: phy@1c07000 {
+		pcie_rc: pcie@1c00000 {
+			compatible = "qcom,pcie-sdx55";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40100000 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "msi8";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
+				 <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x0200 0x1>,
+				    <0x100 &apps_smmu 0x0201 0x1>,
+				    <0x200 &apps_smmu 0x0202 0x1>,
+				    <0x300 &apps_smmu 0x0203 0x1>,
+				    <0x400 &apps_smmu 0x0204 0x1>;
+
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_GDSC>;
+
+			phys = <&pcie_lane>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie_ep: pcie-ep@1c00000 {
+			compatible = "qcom,sdx55-pcie-ep";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40200000 0x100000>,
+			      <0x01c03000 0x3000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio";
+
+			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+			clocks = <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep",
+				      "ref";
+
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global",
+					  "doorbell";
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_GDSC>;
+			phys = <&pcie_lane>;
+			phy-names = "pciephy";
+			max-link-speed = <3>;
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
+		pcie_phy: phy@1c07000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
 			reg = <0x01c07000 0x1c4>;
 			#address-cells = <1>;
@@ -314,7 +442,10 @@
 				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
 				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen";
 
 			resets = <&gcc GCC_PCIE_PHY_BCR>;
 			reset-names = "phy";
@@ -324,7 +455,7 @@
 
 			status = "disabled";
 
-			pcie0_lane: lanes@1c06000 {
+			pcie_lane: lanes@1c06000 {
 				reg = <0x01c06000 0x104>, /* tx0 */
 				      <0x01c06200 0x328>, /* rx0 */
 				      <0x01c07200 0x1e8>, /* pcs */
@@ -385,7 +516,7 @@
 		};
 
 		tcsr: syscon@1fcb000 {
-			compatible = "syscon";
+			compatible = "qcom,sdx55-tcsr", "syscon";
 			reg = <0x01fc0000 0x1000>;
 		};
 
@@ -401,45 +532,6 @@
 			status = "disabled";
 		};
 
-		pcie_ep: pcie-ep@40000000 {
-			compatible = "qcom,sdx55-pcie-ep";
-			reg = <0x01c00000 0x3000>,
-			      <0x40000000 0xf1d>,
-			      <0x40000f20 0xc8>,
-			      <0x40001000 0x1000>,
-			      <0x40200000 0x100000>,
-			      <0x01c03000 0x3000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
-				    "mmio";
-
-			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
-
-			clocks = <&gcc GCC_PCIE_AUX_CLK>,
-				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLEEP_CLK>,
-				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
-			clock-names = "aux", "cfg", "bus_master", "bus_slave",
-				      "slave_q2a", "sleep", "ref";
-
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global", "doorbell";
-			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
-			resets = <&gcc GCC_PCIE_BCR>;
-			reset-names = "core";
-			power-domains = <&gcc PCIE_GDSC>;
-			phys = <&pcie0_lane>;
-			phy-names = "pciephy";
-			max-link-speed = <3>;
-			num-lanes = <2>;
-
-			status = "disabled";
-		};
-
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sdx55-mpss-pas";
 			reg = <0x04080000 0x4040>;
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index ed98c83c141f..57bc3b03d3aa 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -245,6 +245,11 @@
 	status = "okay";
 };
 
+&ipa {
+	qcom,gsi-loader = "skip";
+	status = "okay";
+};
+
 &qpic_bam {
 	status = "okay";
 };
@@ -265,8 +270,8 @@
 };
 
 &remoteproc_mpss {
-	status = "okay";
 	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
 };
 
 &usb {
@@ -278,14 +283,14 @@
 };
 
 &usb_hsphy {
-	status = "okay";
 	vdda-pll-supply = <&vreg_l4b_0p88>;
 	vdda33-supply = <&vreg_l10b_3p08>;
 	vdda18-supply = <&vreg_l5b_1p8>;
+	status = "okay";
 };
 
 &usb_qmpphy {
-	status = "okay";
 	vdda-phy-supply = <&vreg_l4b_0p88>;
 	vdda-pll-supply = <&vreg_l1b_1p2>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 192f9f94bc8b..525dd8a1f664 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/interconnect/qcom,sdx65.h>
 
 / {
 	#address-cells = <1>;
@@ -223,16 +224,15 @@
 				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0xff4000 0x120>;
 			#phy-cells = <0>;
-			status = "disabled";
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "ref";
 			resets = <&gcc GCC_QUSB2PHY_BCR>;
+			status = "disabled";
 		};
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
 			reg = <0x00ff6000 0x1c8>;
-			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -246,6 +246,8 @@
 				 <&gcc GCC_USB3_PHY_BCR>;
 			reset-names = "phy", "common";
 
+			status = "disabled";
+
 			usb_ssphy: phy@ff6200 {
 				reg = <0x00ff6e00 0x160>,
 				      <0x00ff7000 0x1ec>,
@@ -299,6 +301,44 @@
 			#hwlock-cells = <1>;
 		};
 
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sdx65-ipa";
+
+			reg = <0x03f40000 0x10000>,
+			      <0x03f50000 0x5000>,
+			      <0x03e04000 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			iommus = <&apps_smmu 0x5e0 0x0>,
+				 <&apps_smmu 0x5e2 0x0>;
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
+					<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sdx55-mpss-pas";
 			reg = <0x04080000 0x4040>;
@@ -355,7 +395,6 @@
 		usb: usb@a6f8800 {
 			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
 			reg = <0x0a6f8800 0x400>;
-			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -385,6 +424,8 @@
 
 			resets = <&gcc GCC_USB30_BCR>;
 
+			status = "disabled";
+
 			usb_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0x0a600000 0xcd00>;
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 0af63ddc4473..fa09295052c6 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -196,6 +196,19 @@
 
 &i2c0 {
 	status = "okay";
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
 	touchscreen@55 {
 		compatible = "sitronix,st1232";
 		reg = <0x55>;
@@ -205,12 +218,6 @@
 		pinctrl-names = "default";
 		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
 	};
-
-	wm8978: codec@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8978";
-		reg = <0x1a>;
-	};
 };
 
 &i2c2 {
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index 5f05f2b44a48..fd40890bd77b 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "r8a7779.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -66,6 +67,51 @@
 		vdd33a-supply = <&fixedregulator3v3>;
 	};
 
+	keyboard-irq {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keyboard_irq_pins>;
+		pinctrl-names = "default";
+
+		interrupt-parent = <&gpio0>;
+
+		key-1 {
+			interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_1>;
+			label = "SW1-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_2>;
+			label = "SW1-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	keyboard-gpio {
+		compatible = "gpio-keys-polled";
+		poll-interval = <50>;
+
+		pinctrl-0 = <&keyboard_gpio_pins>;
+		pinctrl-names = "default";
+
+		key-3 {
+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW1-3";
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW1-4";
+			debounce-interval = <20>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led2 {
@@ -161,6 +207,20 @@
 	};
 };
 
+&gpio0 {
+	keyboard-irq-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+};
+
 &irqpin0 {
 	status = "okay";
 };
@@ -223,6 +283,15 @@
 		groups = "hspi0";
 		function = "hspi0";
 	};
+
+	keyboard_irq_pins: keyboard-irq {
+		pins = "GP_0_17", "GP_0_18";
+		bias-pull-up;
+	};
+	keyboard_gpio_pins: keyboard-gpio {
+		pins = "GP_0_19", "GP_0_20";
+		bias-pull-up;
+	};
 };
 
 &sata {
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 39fc58f32df6..97b767d81d92 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -324,6 +324,69 @@
 		status = "disabled";
 	};
 
+	pwm0: pwm@ffe50000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe50000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ffe51000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe51000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ffe52000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe52000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ffe53000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe53000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@ffe54000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe54000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@ffe55000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe55000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@ffe56000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe56000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
 	pfc: pinctrl@fffc0000 {
 		compatible = "renesas,pfc-r8a7779";
 		reg = <0xfffc0000 0x23c>;
@@ -554,7 +617,8 @@
 			compatible = "renesas,r8a7779-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
 			reg = <0xffc80030 4>;
-			clocks = <&cpg_clocks R8A7779_CLK_S>,
+			clocks = <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_S>,
 				 <&cpg_clocks R8A7779_CLK_P>,
 				 <&cpg_clocks R8A7779_CLK_P>,
 				 <&cpg_clocks R8A7779_CLK_P>,
@@ -572,20 +636,21 @@
 				 <&cpg_clocks R8A7779_CLK_P>;
 			#clock-cells = <1>;
 			clock-indices = <
-				R8A7779_CLK_HSPI R8A7779_CLK_TMU2
-				R8A7779_CLK_TMU1 R8A7779_CLK_TMU0
-				R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0
-				R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4
-				R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2
-				R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0
-				R8A7779_CLK_I2C3 R8A7779_CLK_I2C2
-				R8A7779_CLK_I2C1 R8A7779_CLK_I2C0
+				R8A7779_CLK_PWM R8A7779_CLK_HSPI
+				R8A7779_CLK_TMU2 R8A7779_CLK_TMU1
+				R8A7779_CLK_TMU0 R8A7779_CLK_HSCIF1
+				R8A7779_CLK_HSCIF0 R8A7779_CLK_SCIF5
+				R8A7779_CLK_SCIF4 R8A7779_CLK_SCIF3
+				R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1
+				R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3
+				R8A7779_CLK_I2C2 R8A7779_CLK_I2C1
+				R8A7779_CLK_I2C0
 			>;
 			clock-output-names =
-				"hspi", "tmu2", "tmu1", "tmu0", "hscif1",
-				"hscif0", "scif5", "scif4", "scif3", "scif2",
-				"scif1", "scif0", "i2c3", "i2c2", "i2c1",
-				"i2c0";
+				"pwm", "hspi", "tmu2", "tmu1", "tmu0",
+				"hscif1", "hscif0", "scif5", "scif4", "scif3",
+				"scif2", "scif1", "scif0", "i2c3", "i2c2",
+				"i2c1", "i2c0";
 		};
 		mstp1_clks: clocks@ffc80034 {
 			compatible = "renesas,r8a7779-mstp-clocks",
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 2f2e483a2c2a..46fb81f5062f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -376,6 +376,17 @@
 			reg = <0 0xe6060000 0 0x250>;
 		};
 
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7790", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a7790-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
@@ -1037,6 +1048,76 @@
 			status = "disabled";
 		};
 
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		can0: can@e6e80000 {
 			compatible = "renesas,can-r8a7790",
 				     "renesas,rcar-gen2-can";
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
index 27fb06ce907e..8b58773e592e 100644
--- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -5,6 +5,12 @@
  * Copyright 2015 Google, Inc
  */
 
+/ {
+	aliases {
+		mmc1 = &sdmmc;
+	};
+};
+
 &io_domains {
 	sdcard-supply = <&vccio_sd>;
 };
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index e406c8c7c7e5..d838bf0d5d9a 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -10,6 +10,10 @@
 #include "rk3288.dtsi"
 
 / {
+	aliases {
+		mmc0 = &emmc;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 2ca76b69add7..cb9cdaddffd4 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -942,7 +942,7 @@
 		status = "disabled";
 	};
 
-	spdif: sound@ff88b0000 {
+	spdif: sound@ff8b0000 {
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
@@ -1114,7 +1114,7 @@
 		status = "disabled";
 	};
 
-	mipi_dsi: mipi@ff960000 {
+	mipi_dsi: dsi@ff960000 {
 		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x0 0xff960000 0x0 0x4000>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -1125,18 +1125,28 @@
 		status = "disabled";
 
 		ports {
-			mipi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				mipi_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_mipi>;
 				};
+
 				mipi_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_mipi>;
 				};
 			};
+
+			mipi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -1157,7 +1167,6 @@
 
 			lvds_in: port@0 {
 				reg = <0>;
-
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1165,11 +1174,16 @@
 					reg = <0>;
 					remote-endpoint = <&vopb_out_lvds>;
 				};
+
 				lvds_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_lvds>;
 				};
 			};
+
+			lvds_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -1190,19 +1204,26 @@
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
 			edp_in: port@0 {
 				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				edp_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_edp>;
 				};
+
 				edp_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_edp>;
 				};
 			};
+
+			edp_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 12e90a1cc6a1..1a9e4a96b2ff 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -566,7 +566,7 @@
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
 						<&clocks SCLK_CSIS>;
-				clock-names = "clk_csis",
+				clock-names = "csis",
 						"sclk_csis";
 				bus-width = <4>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
index 8142c017882c..4d741adc16cd 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -210,8 +210,8 @@
 		 * As we're dealing with 3wire SPI, we only define SCK
 		 * and MOSI (in the spec MOSI is called "SDA").
 		 */
-		gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 4523c63475e4..3bb812d6399e 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -447,6 +447,36 @@
 					slew-rate = <2>;
 				};
 			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index c31ceb821231..c9e05e3540d6 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -362,6 +362,35 @@
 			status = "disabled";
 		};
 
+		can1: can@40006400 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40006400 0x200>;
+			interrupts = <19>, <20>, <21>, <22>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F4_APB1_RESET(CAN1)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>;
+			st,can-primary;
+			st,gcan = <&gcan>;
+			status = "disabled";
+		};
+
+		gcan: gcan@40006600 {
+			compatible = "st,stm32f4-gcan", "syscon";
+			reg = <0x40006600 0x200>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>;
+		};
+
+		can2: can@40006800 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40006800 0x200>;
+			interrupts = <63>, <64>, <65>, <66>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F4_APB1_RESET(CAN2)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN2)>;
+			st,gcan = <&gcan>;
+			status = "disabled";
+		};
+
 		dac: dac@40007400 {
 			compatible = "st,stm32f4-dac-core";
 			reg = <0x40007400 0x400>;
diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
index b2dce3a29f39..27e0c3826789 100644
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -258,4 +258,133 @@
 			bias-disable;
 		};
 	};
+
+	uart4_idle_pins_a: uart4-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart8_idle_pins_a: uart8-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart8_sleep_pins_a: uart8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */
+				 <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */
+		};
+	};
+
+	usart1_pins_a: usart1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */
+				 <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */
+				 <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	usart1_idle_pins_a: usart1-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* USART1_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */
+			bias-pull-up;
+		};
+	};
+
+	usart1_sleep_pins_a: usart1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* USART1_RTS */
+				 <STM32_PINMUX('A', 7, ANALOG)>, /* USART1_CTS_NSS */
+				 <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 11, AF2)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_idle_pins_a: usart2-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 5949473cbbfd..d163c267e34c 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -397,12 +397,42 @@
 			status = "disabled";
 		};
 
+		usart3: serial@4000f000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000f000 0x400>;
+			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART3_K>;
+			resets = <&rcc USART3_R>;
+			wakeup-source;
+			dmas = <&dmamux1 45 0x400 0x5>,
+			       <&dmamux1 46 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		uart4: serial@40010000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART4_K>;
 			resets = <&rcc UART4_R>;
+			wakeup-source;
+			dmas = <&dmamux1 63 0x400 0x5>,
+			       <&dmamux1 64 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart5: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART5_K>;
+			resets = <&rcc UART5_R>;
+			wakeup-source;
+			dmas = <&dmamux1 65 0x400 0x5>,
+			       <&dmamux1 66 0x400 0x1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -442,6 +472,32 @@
 			status = "disabled";
 		};
 
+		uart7: serial@40018000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40018000 0x400>;
+			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART7_K>;
+			resets = <&rcc UART7_R>;
+			wakeup-source;
+			dmas = <&dmamux1 79 0x400 0x5>,
+			       <&dmamux1 80 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart8: serial@40019000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40019000 0x400>;
+			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART8_K>;
+			resets = <&rcc UART8_R>;
+			wakeup-source;
+			dmas = <&dmamux1 81 0x400 0x5>,
+			       <&dmamux1 82 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		timers1: timer@44000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -524,6 +580,19 @@
 			};
 		};
 
+		usart6: serial@44003000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x44003000 0x400>;
+			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART6_K>;
+			resets = <&rcc USART6_R>;
+			wakeup-source;
+			dmas = <&dmamux1 71 0x400 0x5>,
+			       <&dmamux1 72 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2s1: audio-controller@44004000 {
 			compatible = "st,stm32h7-i2s";
 			reg = <0x44004000 0x400>;
@@ -748,6 +817,32 @@
 			status = "disabled";
 		};
 
+		usart1: serial@4c000000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4c000000 0x400>;
+			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART1_K>;
+			resets = <&rcc USART1_R>;
+			wakeup-source;
+			dmas = <&dmamux1 41 0x400 0x5>,
+			       <&dmamux1 42 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		usart2: serial@4c001000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4c001000 0x400>;
+			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART2_K>;
+			resets = <&rcc USART2_R>;
+			wakeup-source;
+			dmas = <&dmamux1 43 0x400 0x5>,
+			       <&dmamux1 44 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2s4: audio-controller@4c002000 {
 			compatible = "st,stm32h7-i2s";
 			reg = <0x4c002000 0x400>;
@@ -1137,6 +1232,54 @@
 			dma-requests = <48>;
 		};
 
+		fmc: memory-controller@58002000 {
+			compatible = "st,stm32mp1-fmc2-ebi";
+			reg = <0x58002000 0x1000>;
+			ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+				 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+				 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+				 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+				 <4 0 0x80000000 0x10000000>; /* NAND */
+			#address-cells = <2>;
+			#size-cells = <1>;
+			clocks = <&rcc FMC_K>;
+			resets = <&rcc FMC_R>;
+			status = "disabled";
+
+			nand-controller@4,0 {
+				compatible = "st,stm32mp1-fmc2-nfc";
+				reg = <4 0x00000000 0x1000>,
+				      <4 0x08010000 0x1000>,
+				      <4 0x08020000 0x1000>,
+				      <4 0x01000000 0x1000>,
+				      <4 0x09010000 0x1000>,
+				      <4 0x09020000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
+				       <&mdma 24 0x2 0x12000a08 0x0 0x0>,
+				       <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
+				dma-names = "tx", "rx", "ecc";
+				status = "disabled";
+			};
+		};
+
+		qspi: spi@58003000 {
+			compatible = "st,stm32f469-qspi";
+			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+			reg-names = "qspi", "qspi_mm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
+			       <&mdma 26 0x2 0x10100008 0x0 0x0>;
+			dma-names = "tx", "rx";
+			clocks = <&rcc QSPI_K>;
+			resets = <&rcc QSPI_R>;
+			status = "disabled";
+		};
+
 		sdmmc1: mmc@58005000 {
 			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x20253180>;
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index c40686cb2b9a..f0900ca672b5 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -19,6 +19,13 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &usart1;
+		serial2 = &uart8;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@c0000000 {
@@ -267,8 +274,41 @@
 };
 
 &uart4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep", "idle";
 	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart8_pins_a>;
+	pinctrl-1 = <&uart8_sleep_pins_a>;
+	pinctrl-2 = <&uart8_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
+&usart1 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-1 = <&usart1_sleep_pins_a>;
+	pinctrl-2 = <&usart1_idle_pins_a>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	pinctrl-2 = <&usart2_idle_pins_a>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index a9d2bec99014..e86d989dd351 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1880,6 +1880,21 @@
 		};
 	};
 
+	spi1_pins_b: spi1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
 	spi2_pins_a: spi2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
@@ -2163,7 +2178,7 @@
 				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
 			bias-disable;
 			drive-push-pull;
-			slew-rate = <3>;
+			slew-rate = <0>;
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
@@ -2181,7 +2196,7 @@
 			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
 			bias-disable;
 			drive-push-pull;
-			slew-rate = <3>;
+			slew-rate = <0>;
 		};
 		pins3 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
@@ -2448,19 +2463,4 @@
 			bias-disable;
 		};
 	};
-
-	spi1_pins_b: spi1-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
-				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
-			bias-disable;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 4e437d3f2ed6..63f4c78fcc1d 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1130,8 +1130,8 @@
 		usbotg_hs: usb-otg@49000000 {
 			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
 			reg = <0x49000000 0x10000>;
-			clocks = <&rcc USBO_K>;
-			clock-names = "otg";
+			clocks = <&rcc USBO_K>, <&usbphyc>;
+			clock-names = "otg", "utmi";
 			resets = <&rcc USBO_R>;
 			reset-names = "dwc2";
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 4c8be9c8eb20..0da3667ab1e0 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -17,9 +17,6 @@
 
 	aliases {
 		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index 2bc92ef3aeb9..ab13e340f4ef 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -18,9 +18,6 @@
 
 	aliases {
 		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
 		serial3 = &usart2;
 	};
 
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index b1eb688a278a..8beb901be506 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -16,6 +16,10 @@
 	model = "STMicroelectronics STM32MP157C eval daughter";
 	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
 
+	aliases {
+		serial0 = &uart4;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -65,15 +69,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@e8000000 {
-			reg = <0xe8000000 0x8000000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
 	};
 
 	sd_switch: regulator-sd_switch {
@@ -140,10 +135,6 @@
 	status = "okay";
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
index 7d11c50b9e40..b01470a9a3d5 100644
--- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
@@ -68,11 +68,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@dc000000 {
-			reg = <0xdc000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led: gpio_leds {
@@ -183,10 +178,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 542226cfcfdf..ba8e9d9a42fa 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -14,16 +14,15 @@
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
 	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	aliases {
-		serial0 = &uart4;
 		serial1 = &usart3;
 		ethernet0 = &ethernet0;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		clk_ext_camera: clk-ext-camera {
 			#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index cb00ce7cec8b..407ed3952f75 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -73,7 +73,7 @@
 	};
 
 	panel: panel {
-		compatible = "edt,etm0700g0edh6", "simple-panel";
+		compatible = "edt,etm0700g0edh6";
 		backlight = <&backlight>;
 		enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>;
 		power-supply = <&reg_3v3>;
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index 2d9461006810..e22871dc580c 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -62,11 +62,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -80,11 +75,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 11370ae0d868..cefeeb00fc22 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -8,6 +8,12 @@
 #include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+	};
+
 	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xc0000000 0x20000000>;
@@ -53,11 +59,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -151,10 +152,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
index 935b7084b5a2..a43965c86fe8 100644
--- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -210,8 +210,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 6cdadba6a3ac..5cce4918f84c 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -822,7 +822,7 @@
 			clocks = <&ccu CLK_APB2_UART0>;
 			resets = <&ccu RST_APB2_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -835,7 +835,7 @@
 			clocks = <&ccu CLK_APB2_UART1>;
 			resets = <&ccu RST_APB2_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -848,7 +848,7 @@
 			clocks = <&ccu CLK_APB2_UART2>;
 			resets = <&ccu RST_APB2_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -861,7 +861,7 @@
 			clocks = <&ccu CLK_APB2_UART3>;
 			resets = <&ccu RST_APB2_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -874,7 +874,7 @@
 			clocks = <&ccu CLK_APB2_UART4>;
 			resets = <&ccu RST_APB2_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -887,7 +887,7 @@
 			clocks = <&ccu CLK_APB2_UART5>;
 			resets = <&ccu RST_APB2_UART5>;
 			dmas = <&dma 22>, <&dma 22>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index f630ab55bb6a..4aa9d88c9ea3 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -490,7 +490,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -503,7 +503,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -516,7 +516,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -529,7 +529,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -542,7 +542,7 @@
 			clocks = <&ccu CLK_BUS_UART4>;
 			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts
new file mode 100644
index 000000000000..94e24b5926dd
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+
+#include "sun8i-t113s.dtsi"
+#include "sunxi-d1s-t113-mangopi-mq-r.dtsi"
+
+/ {
+	model = "MangoPi MQ-R-T113";
+	compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s";
+
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&mmc1 {
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-t113s.dtsi b/arch/arm/boot/dts/sun8i-t113s.dtsi
new file mode 100644
index 000000000000..804aa197a24f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-t113s.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/allwinner/sunxi-d1s-t113.dtsi>
+#include <riscv/allwinner/sunxi-d1-t113.dtsi>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+	};
+
+	gic: interrupt-controller@1c81000 {
+		compatible = "arm,gic-400";
+		reg = <0x03021000 0x1000>,
+		      <0x03022000 0x2000>,
+		      <0x03024000 0x2000>,
+		      <0x03026000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index db194c606fdc..b001251644f7 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -479,7 +479,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
@@ -492,7 +492,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
@@ -505,7 +505,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART2>;
 			pinctrl-0 = <&uart2_pins>;
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
index 04e59b8381cb..43896723a994 100644
--- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "suniv-f1c100s.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Lichee Pi Nano";
 	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
@@ -50,8 +52,22 @@
 	};
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pe_pins>;
 	status = "okay";
 };
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 9455d27e516e..3c61d59ab5f8 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -133,6 +133,32 @@
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		ccu: clock@1c20000 {
 			compatible = "allwinner,suniv-f1c100s-ccu";
 			reg = <0x01c20000 0x400>;
@@ -181,6 +207,12 @@
 				pins = "PE0", "PE1";
 				function = "uart0";
 			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart1";
+			};
 		};
 
 		i2c0: i2c@1c27000 {
diff --git a/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
new file mode 100644
index 000000000000..2d2a3f026df3
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Arm Ltd,
+ * based on work:
+ *   Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lctech Pi F1C200s";
+	compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
+		     "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pa_pins>;
+	status = "okay";
+};
+
+/*
+ * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
+ * to Vin, which supplies the board. Host mode works (if the board is powered
+ * otherwise), but peripheral is probably the intention.
+ */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts
new file mode 100644
index 000000000000..184c245041a6
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Popcorn Computer PopStick v1.1";
+	compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
+		     "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi
new file mode 100644
index 000000000000..e9bc749488bb
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+/*
+ * Common peripherals and configurations for MangoPi MQ-R boards.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+		};
+	};
+
+	/* board wide 5V supply directly from the USB-C socket */
+	reg_vcc5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board */
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* XC6206 LDO on the board */
+	reg_avdd2v8: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_3v3>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_3v3>;
+	vcc-pd-supply = <&reg_3v3>;
+	vcc-pe-supply = <&reg_avdd2v8>;
+	vcc-pf-supply = <&reg_3v3>;
+	vcc-pg-supply = <&reg_3v3>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pb_pins>;
+	status = "okay";
+};
+
+/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 686193bd6bd9..ade1cd50e445 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -710,7 +710,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -723,7 +723,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -736,7 +736,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -749,7 +749,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts
index 7b2969656ec9..c2a9c3fb5b33 100644
--- a/arch/arm/boot/dts/tegra20-asus-tf101.dts
+++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts
@@ -520,10 +520,10 @@
 			micdet-delay = <100>;
 
 			gpio-cfg = <
-				0xffffffff /* don't touch */
-				0xffffffff /* don't touch */
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
 				0x00000000 /* Speaker-enable GPIO, output, low */
-				0x00000400 /* Mic bias current detect */
+				0xffffffff /* don't touch */
 				0xffffffff /* don't touch */
 			>;
 
@@ -577,9 +577,9 @@
 					vdd-supply = <&vdd_1v8_sys>;
 					vddio-supply = <&vdd_1v8_sys>;
 
-					mount-matrix =	 "1",  "0",  "0",
-							 "0",  "1",  "0",
-							 "0",  "0",  "1";
+					mount-matrix =	"-1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0", "-1";
 				};
 			};
 		};
@@ -1184,15 +1184,16 @@
 			"Int Spk", "RON",
 			"Int Spk", "LOP",
 			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
 
 		nvidia,i2s-controller = <&tegra_i2s1>;
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-		nvidia,headset;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra30-asus-tf201.dts b/arch/arm/boot/dts/tegra30-asus-tf201.dts
index 3c2b9e93e028..0406c5a69c12 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf201.dts
+++ b/arch/arm/boot/dts/tegra30-asus-tf201.dts
@@ -624,4 +624,21 @@
 		/delete-node/ opp-800000000-1300;
 		/delete-node/ opp-900000000-1350;
 	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf201",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Prime TF201 RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-tf300t.dts b/arch/arm/boot/dts/tegra30-asus-tf300t.dts
index 506ae3626731..970a1f08dc8c 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf300t.dts
+++ b/arch/arm/boot/dts/tegra30-asus-tf300t.dts
@@ -128,8 +128,8 @@
 			micdet-delay = <100>;
 
 			gpio-cfg = <
-				0xffffffff /* don't touch */
-				0xffffffff /* don't touch */
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
 				0x00000000 /* Speaker-enable GPIO, output, low */
 				0xffffffff /* don't touch */
 				0xffffffff /* don't touch */
@@ -1023,12 +1023,10 @@
 			"Int Spk", "RON",
 			"Int Spk", "LOP",
 			"Int Spk", "LON",
-			"IN1L", "Mic Jack",
 			"IN2L", "Mic Jack",
 			"DMICDAT", "Int Mic";
 
 		nvidia,audio-codec = <&wm8903>;
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,headset;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts
index 573deeafb7ba..4861db8e1e59 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts
+++ b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts
@@ -1084,4 +1084,21 @@
 		/delete-node/ opp-800000000;
 		/delete-node/ opp-900000000;
 	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf300tg",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Pad TF300TG RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/tegra30-asus-tf700t.dts
index e7fe8c7a7435..efde7dad718a 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf700t.dts
+++ b/arch/arm/boot/dts/tegra30-asus-tf700t.dts
@@ -820,4 +820,21 @@
 		enable-active-high;
 		vin-supply = <&vdd_3v3_sys>;
 	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf700t",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Infinity TF700T RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
index 1861b2de2dc3..bdb898ad6262 100644
--- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
@@ -558,7 +558,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
-			spi2_cs1_n_pw2 {
+			hp_detect {
 				nvidia,pins = "spi2_cs1_n_pw2";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -566,10 +566,10 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
-			spi2_sck_px2 {
+			mic_detect {
 				nvidia,pins = "spi2_sck_px2";
 				nvidia,function = "spi2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
@@ -1674,7 +1674,8 @@
 		nvidia,i2s-controller = <&tegra_i2s1>;
 
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-		nvidia,hp-mute-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi
index d100a1a8b705..a2d557155114 100644
--- a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi
+++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi
@@ -210,6 +210,20 @@
 			opp-suspend;
 		};
 
+		opp-266500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-266500000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
 		opp-333500000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <333500000>;
@@ -424,6 +438,12 @@
 			opp-suspend;
 		};
 
+		opp-266500000 {
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <2132000>;
+		};
+
 		opp-333500000 {
 			opp-hz = /bits/ 64 <333500000>;
 			opp-supported-hw = <0x000F>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index b6fcac6016e0..9cba67b54111 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -1283,10 +1283,7 @@
 			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&{/cpus/cpu@0}>,
-				     <&{/cpus/cpu@1}>,
-				     <&{/cpus/cpu@2}>,
-				     <&{/cpus/cpu@3}>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 	};
 
 	thermal-zones {
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index da30a4d4f35c..309b74783468 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -494,7 +494,7 @@ static int locomo_probe(struct platform_device *dev)
 	return __locomo_probe(&dev->dev, mem, irq);
 }
 
-static int locomo_remove(struct platform_device *dev)
+static void locomo_remove(struct platform_device *dev)
 {
 	struct locomo *lchip = platform_get_drvdata(dev);
 
@@ -502,8 +502,6 @@ static int locomo_remove(struct platform_device *dev)
 		__locomo_remove(lchip);
 		platform_set_drvdata(dev, NULL);
 	}
-
-	return 0;
 }
 
 /*
@@ -514,7 +512,7 @@ static int locomo_remove(struct platform_device *dev)
  */
 static struct platform_driver locomo_device_driver = {
 	.probe		= locomo_probe,
-	.remove		= locomo_remove,
+	.remove_new	= locomo_remove,
 #ifdef CONFIG_PM
 	.suspend	= locomo_suspend,
 	.resume		= locomo_resume,
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index f5e6990b8856..aad6ba236f0f 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -1123,7 +1123,7 @@ static int sa1111_probe(struct platform_device *pdev)
 	return __sa1111_probe(&pdev->dev, mem, irq);
 }
 
-static int sa1111_remove(struct platform_device *pdev)
+static void sa1111_remove(struct platform_device *pdev)
 {
 	struct sa1111 *sachip = platform_get_drvdata(pdev);
 
@@ -1135,8 +1135,6 @@ static int sa1111_remove(struct platform_device *pdev)
 		__sa1111_remove(sachip);
 		platform_set_drvdata(pdev, NULL);
 	}
-
-	return 0;
 }
 
 static struct dev_pm_ops sa1111_pm_ops = {
@@ -1155,7 +1153,7 @@ static struct dev_pm_ops sa1111_pm_ops = {
  */
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
-	.remove		= sa1111_remove,
+	.remove_new	= sa1111_remove,
 	.driver		= {
 		.name	= "sa1111",
 		.pm	= &sa1111_pm_ops,
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index e74c5bfdc6d3..9018c7240166 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -236,7 +236,7 @@ err_ioremap:
 	return ret;
 }
 
-static int scoop_remove(struct platform_device *pdev)
+static void scoop_remove(struct platform_device *pdev)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(pdev);
 
@@ -246,13 +246,11 @@ static int scoop_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	iounmap(sdev->base);
 	kfree(sdev);
-
-	return 0;
 }
 
 static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
-	.remove		= scoop_remove,
+	.remove_new	= scoop_remove,
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
 	.driver		= {
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 711a79e9be00..c9a602aee715 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -160,7 +160,7 @@ CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_DMADEVICES=y
 CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
+CONFIG_IMX_SDMA=m
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_FSL_MX25_ADC=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 6dc6fed12af8..4de293da4789 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -31,7 +31,7 @@ CONFIG_SOC_VF610=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
 CONFIG_HIGHMEM=y
-CONFIG_ARCH_FORCE_MAX_ORDER=14
+CONFIG_ARCH_FORCE_MAX_ORDER=13
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
@@ -76,7 +76,7 @@ CONFIG_RFKILL=y
 CONFIG_RFKILL_INPUT=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_IMX6=y
+CONFIG_PCI_IMX6_HOST=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
@@ -128,6 +128,7 @@ CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROCHIP is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_QCA7000_SPI=m
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
 CONFIG_SMC911X=y
@@ -213,8 +214,12 @@ CONFIG_GPIO_SIOX=m
 CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_BD71815=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_74X164=y
+CONFIG_W1=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_SLAVE_THERM=m
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
@@ -223,6 +228,7 @@ CONFIG_RN5T618_POWER=m
 CONFIG_SENSORS_MC13783_ADC=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_PWM_FAN=y
 CONFIG_SENSORS_SY7636A=y
 CONFIG_THERMAL_STATISTICS=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
@@ -242,8 +248,10 @@ CONFIG_MFD_MC13XXX_I2C=y
 CONFIG_MFD_SY7636A=y
 CONFIG_MFD_RN5T618=y
 CONFIG_MFD_STMPE=y
+CONFIG_MFD_ROHM_BD71828=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_BD71815=y
 CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_DA9062=y
 CONFIG_REGULATOR_DA9063=y
@@ -271,6 +279,7 @@ CONFIG_VIDEO_OV5645=m
 CONFIG_VIDEO_ADV7180=m
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
+CONFIG_DRM_I2C_NXP_TDA998X=y
 CONFIG_DRM_MSM=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
@@ -380,6 +389,7 @@ CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8523=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_BD70528=y
 CONFIG_RTC_DRV_RC5T619=y
 CONFIG_RTC_DRV_RV3029C2=y
 CONFIG_RTC_DRV_DA9063=y
@@ -396,6 +406,7 @@ CONFIG_STAGING=y
 CONFIG_STAGING_MEDIA=y
 CONFIG_VIDEO_IMX_MEDIA=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_BD718XX=y
 CONFIG_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MN=y
 CONFIG_CLK_IMX8MP=y
@@ -403,6 +414,7 @@ CONFIG_CLK_IMX8MQ=y
 CONFIG_SOC_IMX8M=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_IIO=y
+CONFIG_IIO_ST_ACCEL_3AXIS=m
 CONFIG_MMA8452=y
 CONFIG_IMX7D_ADC=y
 CONFIG_RN5T618_ADC=y
diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig
index bd29e5012cb0..385ad0f391a8 100644
--- a/arch/arm/configs/milbeaut_m10v_defconfig
+++ b/arch/arm/configs/milbeaut_m10v_defconfig
@@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y
 # CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 CONFIG_HIGHMEM=y
-CONFIG_ARCH_FORCE_MAX_ORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=11
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_EFI=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 084cc612ea23..871fffe92187 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -251,6 +251,7 @@ CONFIG_B53_SPI_DRIVER=m
 CONFIG_B53_MDIO_DRIVER=m
 CONFIG_B53_MMAP_DRIVER=m
 CONFIG_NET_DSA_BCM_SF2=m
+CONFIG_NET_DSA_RZN1_A5PSW=m
 CONFIG_SUN4I_EMAC=y
 CONFIG_SPI_AX88796C=m
 CONFIG_BCMGENET=m
@@ -474,6 +475,7 @@ CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_PINCTRL_RZA2=y
+CONFIG_PINCTRL_RZN1=y
 CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
@@ -563,6 +565,7 @@ CONFIG_MESON_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_RENESAS_WDT=m
 CONFIG_RENESAS_RZAWDT=m
+CONFIG_RENESAS_RZN1WDT=m
 CONFIG_STPMIC1_WATCHDOG=y
 CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM47XX_WDT=y
@@ -873,6 +876,7 @@ CONFIG_USB_ISP1301=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_RENESAS_USBF=m
 CONFIG_USB_ASPEED_VHUB=m
 CONFIG_USB_CONFIGFS=m
 CONFIG_USB_CONFIGFS_SERIAL=y
@@ -989,6 +993,7 @@ CONFIG_RTC_DRV_SH=m
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_AT91RM9200=m
 CONFIG_RTC_DRV_AT91SAM9=m
+CONFIG_RTC_DRV_RZN1=m
 CONFIG_RTC_DRV_VT8500=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_RTC_DRV_MV=y
@@ -1020,6 +1025,7 @@ CONFIG_UNIPHIER_MDMAC=y
 CONFIG_XILINX_DMA=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_DW_DMAC=y
+CONFIG_RZN1_DMAMUX=m
 CONFIG_RCAR_DMAC=y
 CONFIG_RENESAS_USB_DMAC=m
 CONFIG_VIRTIO_PCI=y
@@ -1212,6 +1218,8 @@ CONFIG_FSI_MASTER_ASPEED=m
 CONFIG_FSI_SCOM=m
 CONFIG_FSI_SBEFIFO=m
 CONFIG_FSI_OCC=m
+CONFIG_TEE=y
+CONFIG_OPTEE=y
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=y
 CONFIG_COUNTER=m
diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig
deleted file mode 100644
index 70a67b3fc91b..000000000000
--- a/arch/arm/configs/oxnas_v6_defconfig
+++ /dev/null
@@ -1,92 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CGROUPS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_STRICT_MODULE_RWX=y
-CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_OXNAS=y
-CONFIG_MACH_OX820=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=16
-CONFIG_ARCH_FORCE_MAX_ORDER=12
-CONFIG_SECCOMP=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_KEXEC=y
-CONFIG_EFI=y
-CONFIG_CPU_IDLE=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_VFP=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_CMA=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_OXNAS=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_NETDEVICES=y
-CONFIG_STMMAC_ETH=y
-CONFIG_REALTEK_PHY=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_CLASS_FLASH=m
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_EXT4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_UBIFS_FS=y
-CONFIG_PSTORE=y
-CONFIG_PSTORE_CONSOLE=y
-CONFIG_PSTORE_PMSG=y
-CONFIG_PSTORE_RAM=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index e656d3af2266..b46e39369dbb 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -20,7 +20,7 @@ CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_AKITA=y
 CONFIG_MACH_BORZOI=y
 CONFIG_AEABI=y
-CONFIG_ARCH_FORCE_MAX_ORDER=9
+CONFIG_ARCH_FORCE_MAX_ORDER=8
 CONFIG_CMDLINE="root=/dev/ram0 ro"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index 0d964c613d71..954112041403 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -19,7 +19,7 @@ CONFIG_ATMEL_CLOCKSOURCE_TCB=y
 # CONFIG_CACHE_L2X0 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 # CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_ARCH_FORCE_MAX_ORDER=15
+CONFIG_ARCH_FORCE_MAX_ORDER=14
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
 CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 751d939fcb76..0b21c0a47582 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -76,6 +76,7 @@ CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_16550A_VARIANTS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_PCI1XXXX is not set
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_EM=y
 # CONFIG_SERIAL_8250_PERICOM is not set
@@ -168,6 +169,7 @@ CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_RENESAS_USBHS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_RENESAS_USBF=y
 CONFIG_USB_ETH=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig
index 5bca2eb59b86..c6448ac860b6 100644
--- a/arch/arm/configs/sp7021_defconfig
+++ b/arch/arm/configs/sp7021_defconfig
@@ -17,7 +17,7 @@ CONFIG_ARCH_SUNPLUS=y
 # CONFIG_VDSO is not set
 CONFIG_SMP=y
 CONFIG_THUMB2_KERNEL=y
-CONFIG_ARCH_FORCE_MAX_ORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=11
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 3bdc217667a6..0f55815eecb3 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -38,6 +38,10 @@ CONFIG_CFG80211_DEBUGFS=y
 CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
 CONFIG_CAIF=y
+CONFIG_NFC=m
+CONFIG_NFC_HCI=m
+CONFIG_NFC_SHDLC=m
+CONFIG_NFC_PN544_I2C=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_GNSS=y
@@ -180,10 +184,8 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_CRYPTO_DEV_UX500=y
-CONFIG_CRYPTO_DEV_UX500_CRYP=y
-CONFIG_CRYPTO_DEV_UX500_HASH=y
-CONFIG_CRYPTO_DEV_UX500_DEBUG=y
+CONFIG_CRYPTO_DEV_STM32_HASH=y
+CONFIG_CRYPTO_DEV_STM32_CRYP=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index ac3fd7523698..96ad442089bd 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -1,5 +1,7 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_FULL=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -42,6 +44,7 @@ CONFIG_NET_9P_VIRTIO=y
 CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
@@ -137,5 +140,4 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/include/asm/arm_pmuv3.h b/arch/arm/include/asm/arm_pmuv3.h
new file mode 100644
index 000000000000..78d3d4b82c6c
--- /dev/null
+++ b/arch/arm/include/asm/arm_pmuv3.h
@@ -0,0 +1,247 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __ASM_PMUV3_H
+#define __ASM_PMUV3_H
+
+#include <asm/cp15.h>
+#include <asm/cputype.h>
+
+#define PMCCNTR			__ACCESS_CP15_64(0, c9)
+
+#define PMCR			__ACCESS_CP15(c9,  0, c12, 0)
+#define PMCNTENSET		__ACCESS_CP15(c9,  0, c12, 1)
+#define PMCNTENCLR		__ACCESS_CP15(c9,  0, c12, 2)
+#define PMOVSR			__ACCESS_CP15(c9,  0, c12, 3)
+#define PMSELR			__ACCESS_CP15(c9,  0, c12, 5)
+#define PMCEID0			__ACCESS_CP15(c9,  0, c12, 6)
+#define PMCEID1			__ACCESS_CP15(c9,  0, c12, 7)
+#define PMXEVTYPER		__ACCESS_CP15(c9,  0, c13, 1)
+#define PMXEVCNTR		__ACCESS_CP15(c9,  0, c13, 2)
+#define PMUSERENR		__ACCESS_CP15(c9,  0, c14, 0)
+#define PMINTENSET		__ACCESS_CP15(c9,  0, c14, 1)
+#define PMINTENCLR		__ACCESS_CP15(c9,  0, c14, 2)
+#define PMMIR			__ACCESS_CP15(c9,  0, c14, 6)
+#define PMCCFILTR		__ACCESS_CP15(c14, 0, c15, 7)
+
+#define PMEVCNTR0		__ACCESS_CP15(c14, 0, c8, 0)
+#define PMEVCNTR1		__ACCESS_CP15(c14, 0, c8, 1)
+#define PMEVCNTR2		__ACCESS_CP15(c14, 0, c8, 2)
+#define PMEVCNTR3		__ACCESS_CP15(c14, 0, c8, 3)
+#define PMEVCNTR4		__ACCESS_CP15(c14, 0, c8, 4)
+#define PMEVCNTR5		__ACCESS_CP15(c14, 0, c8, 5)
+#define PMEVCNTR6		__ACCESS_CP15(c14, 0, c8, 6)
+#define PMEVCNTR7		__ACCESS_CP15(c14, 0, c8, 7)
+#define PMEVCNTR8		__ACCESS_CP15(c14, 0, c9, 0)
+#define PMEVCNTR9		__ACCESS_CP15(c14, 0, c9, 1)
+#define PMEVCNTR10		__ACCESS_CP15(c14, 0, c9, 2)
+#define PMEVCNTR11		__ACCESS_CP15(c14, 0, c9, 3)
+#define PMEVCNTR12		__ACCESS_CP15(c14, 0, c9, 4)
+#define PMEVCNTR13		__ACCESS_CP15(c14, 0, c9, 5)
+#define PMEVCNTR14		__ACCESS_CP15(c14, 0, c9, 6)
+#define PMEVCNTR15		__ACCESS_CP15(c14, 0, c9, 7)
+#define PMEVCNTR16		__ACCESS_CP15(c14, 0, c10, 0)
+#define PMEVCNTR17		__ACCESS_CP15(c14, 0, c10, 1)
+#define PMEVCNTR18		__ACCESS_CP15(c14, 0, c10, 2)
+#define PMEVCNTR19		__ACCESS_CP15(c14, 0, c10, 3)
+#define PMEVCNTR20		__ACCESS_CP15(c14, 0, c10, 4)
+#define PMEVCNTR21		__ACCESS_CP15(c14, 0, c10, 5)
+#define PMEVCNTR22		__ACCESS_CP15(c14, 0, c10, 6)
+#define PMEVCNTR23		__ACCESS_CP15(c14, 0, c10, 7)
+#define PMEVCNTR24		__ACCESS_CP15(c14, 0, c11, 0)
+#define PMEVCNTR25		__ACCESS_CP15(c14, 0, c11, 1)
+#define PMEVCNTR26		__ACCESS_CP15(c14, 0, c11, 2)
+#define PMEVCNTR27		__ACCESS_CP15(c14, 0, c11, 3)
+#define PMEVCNTR28		__ACCESS_CP15(c14, 0, c11, 4)
+#define PMEVCNTR29		__ACCESS_CP15(c14, 0, c11, 5)
+#define PMEVCNTR30		__ACCESS_CP15(c14, 0, c11, 6)
+
+#define PMEVTYPER0		__ACCESS_CP15(c14, 0, c12, 0)
+#define PMEVTYPER1		__ACCESS_CP15(c14, 0, c12, 1)
+#define PMEVTYPER2		__ACCESS_CP15(c14, 0, c12, 2)
+#define PMEVTYPER3		__ACCESS_CP15(c14, 0, c12, 3)
+#define PMEVTYPER4		__ACCESS_CP15(c14, 0, c12, 4)
+#define PMEVTYPER5		__ACCESS_CP15(c14, 0, c12, 5)
+#define PMEVTYPER6		__ACCESS_CP15(c14, 0, c12, 6)
+#define PMEVTYPER7		__ACCESS_CP15(c14, 0, c12, 7)
+#define PMEVTYPER8		__ACCESS_CP15(c14, 0, c13, 0)
+#define PMEVTYPER9		__ACCESS_CP15(c14, 0, c13, 1)
+#define PMEVTYPER10		__ACCESS_CP15(c14, 0, c13, 2)
+#define PMEVTYPER11		__ACCESS_CP15(c14, 0, c13, 3)
+#define PMEVTYPER12		__ACCESS_CP15(c14, 0, c13, 4)
+#define PMEVTYPER13		__ACCESS_CP15(c14, 0, c13, 5)
+#define PMEVTYPER14		__ACCESS_CP15(c14, 0, c13, 6)
+#define PMEVTYPER15		__ACCESS_CP15(c14, 0, c13, 7)
+#define PMEVTYPER16		__ACCESS_CP15(c14, 0, c14, 0)
+#define PMEVTYPER17		__ACCESS_CP15(c14, 0, c14, 1)
+#define PMEVTYPER18		__ACCESS_CP15(c14, 0, c14, 2)
+#define PMEVTYPER19		__ACCESS_CP15(c14, 0, c14, 3)
+#define PMEVTYPER20		__ACCESS_CP15(c14, 0, c14, 4)
+#define PMEVTYPER21		__ACCESS_CP15(c14, 0, c14, 5)
+#define PMEVTYPER22		__ACCESS_CP15(c14, 0, c14, 6)
+#define PMEVTYPER23		__ACCESS_CP15(c14, 0, c14, 7)
+#define PMEVTYPER24		__ACCESS_CP15(c14, 0, c15, 0)
+#define PMEVTYPER25		__ACCESS_CP15(c14, 0, c15, 1)
+#define PMEVTYPER26		__ACCESS_CP15(c14, 0, c15, 2)
+#define PMEVTYPER27		__ACCESS_CP15(c14, 0, c15, 3)
+#define PMEVTYPER28		__ACCESS_CP15(c14, 0, c15, 4)
+#define PMEVTYPER29		__ACCESS_CP15(c14, 0, c15, 5)
+#define PMEVTYPER30		__ACCESS_CP15(c14, 0, c15, 6)
+
+#define RETURN_READ_PMEVCNTRN(n) \
+	return read_sysreg(PMEVCNTR##n)
+static unsigned long read_pmevcntrn(int n)
+{
+	PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN);
+	return 0;
+}
+
+#define WRITE_PMEVCNTRN(n) \
+	write_sysreg(val, PMEVCNTR##n)
+static void write_pmevcntrn(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVCNTRN);
+}
+
+#define WRITE_PMEVTYPERN(n) \
+	write_sysreg(val, PMEVTYPER##n)
+static void write_pmevtypern(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVTYPERN);
+}
+
+static inline unsigned long read_pmmir(void)
+{
+	return read_sysreg(PMMIR);
+}
+
+static inline u32 read_pmuver(void)
+{
+	/* PMUVers is not a signed field */
+	u32 dfr0 = read_cpuid_ext(CPUID_EXT_DFR0);
+
+	return (dfr0 >> 24) & 0xf;
+}
+
+static inline void write_pmcr(u32 val)
+{
+	write_sysreg(val, PMCR);
+}
+
+static inline u32 read_pmcr(void)
+{
+	return read_sysreg(PMCR);
+}
+
+static inline void write_pmselr(u32 val)
+{
+	write_sysreg(val, PMSELR);
+}
+
+static inline void write_pmccntr(u64 val)
+{
+	write_sysreg(val, PMCCNTR);
+}
+
+static inline u64 read_pmccntr(void)
+{
+	return read_sysreg(PMCCNTR);
+}
+
+static inline void write_pmxevcntr(u32 val)
+{
+	write_sysreg(val, PMXEVCNTR);
+}
+
+static inline u32 read_pmxevcntr(void)
+{
+	return read_sysreg(PMXEVCNTR);
+}
+
+static inline void write_pmxevtyper(u32 val)
+{
+	write_sysreg(val, PMXEVTYPER);
+}
+
+static inline void write_pmcntenset(u32 val)
+{
+	write_sysreg(val, PMCNTENSET);
+}
+
+static inline void write_pmcntenclr(u32 val)
+{
+	write_sysreg(val, PMCNTENCLR);
+}
+
+static inline void write_pmintenset(u32 val)
+{
+	write_sysreg(val, PMINTENSET);
+}
+
+static inline void write_pmintenclr(u32 val)
+{
+	write_sysreg(val, PMINTENCLR);
+}
+
+static inline void write_pmccfiltr(u32 val)
+{
+	write_sysreg(val, PMCCFILTR);
+}
+
+static inline void write_pmovsclr(u32 val)
+{
+	write_sysreg(val, PMOVSR);
+}
+
+static inline u32 read_pmovsclr(void)
+{
+	return read_sysreg(PMOVSR);
+}
+
+static inline void write_pmuserenr(u32 val)
+{
+	write_sysreg(val, PMUSERENR);
+}
+
+static inline u32 read_pmceid0(void)
+{
+	return read_sysreg(PMCEID0);
+}
+
+static inline u32 read_pmceid1(void)
+{
+	return read_sysreg(PMCEID1);
+}
+
+static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {}
+static inline void kvm_clr_pmu_events(u32 clr) {}
+static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr)
+{
+	return false;
+}
+
+/* PMU Version in DFR Register */
+#define ARMV8_PMU_DFR_VER_NI        0
+#define ARMV8_PMU_DFR_VER_V3P4      0x5
+#define ARMV8_PMU_DFR_VER_V3P5      0x6
+#define ARMV8_PMU_DFR_VER_IMP_DEF   0xF
+
+static inline bool pmuv3_implemented(int pmuver)
+{
+	return !(pmuver == ARMV8_PMU_DFR_VER_IMP_DEF ||
+		 pmuver == ARMV8_PMU_DFR_VER_NI);
+}
+
+static inline bool is_pmuv3p4(int pmuver)
+{
+	return pmuver >= ARMV8_PMU_DFR_VER_V3P4;
+}
+
+static inline bool is_pmuv3p5(int pmuver)
+{
+	return pmuver >= ARMV8_PMU_DFR_VER_V3P5;
+}
+
+#endif
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 06b48ce23e1c..505a306e0271 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -244,19 +244,6 @@ THUMB(	fpreg	.req	r7	)
 	.endm
 #endif
 
-	.macro	local_bh_disable, ti, tmp
-	ldr	\tmp, [\ti, #TI_PREEMPT]
-	add	\tmp, \tmp, #SOFTIRQ_DISABLE_OFFSET
-	str	\tmp, [\ti, #TI_PREEMPT]
-	.endm
-
-	.macro	local_bh_enable_ti, ti, tmp
-	get_thread_info \ti
-	ldr	\tmp, [\ti, #TI_PREEMPT]
-	sub	\tmp, \tmp, #SOFTIRQ_DISABLE_OFFSET
-	str	\tmp, [\ti, #TI_PREEMPT]
-	.endm
-
 #define USERL(l, x...)				\
 9999:	x;					\
 	.pushsection __ex_table,"a";		\
diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h
index fe9ef6f79e9c..82ec1ccf1fee 100644
--- a/arch/arm/include/asm/dma-iommu.h
+++ b/arch/arm/include/asm/dma-iommu.h
@@ -24,7 +24,7 @@ struct dma_iommu_mapping {
 };
 
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size);
+arm_iommu_create_mapping(const struct bus_type *bus, dma_addr_t base, u64 size);
 
 void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
 
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
deleted file mode 100644
index 4ebbb58f06ea..000000000000
--- a/arch/arm/include/asm/gpio.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ARCH_ARM_GPIO_H
-#define _ARCH_ARM_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-/* The trivial gpiolib dispatchers */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-
-/*
- * Provide a default gpio_to_irq() which should satisfy every case.
- * However, some platforms want to do this differently, so allow them
- * to override it.
- */
-#ifndef gpio_to_irq
-#define gpio_to_irq	__gpio_to_irq
-#endif
-
-#endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index e7ef2b5bea9c..d334c7fb672b 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -142,15 +142,15 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F,
  */
 static void pci_fixup_dec21285(struct pci_dev *dev)
 {
-	int i;
-
 	if (dev->devfn == 0) {
+		struct resource *r;
+
 		dev->class &= 0xff;
 		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start = 0;
+			r->end = 0;
+			r->flags = 0;
 		}
 	}
 }
@@ -162,13 +162,11 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_d
 static void pci_fixup_ide_bases(struct pci_dev *dev)
 {
 	struct resource *r;
-	int i;
 
 	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
 		return;
 
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		r = dev->resource + i;
+	pci_dev_for_each_resource(dev, r) {
 		if ((r->start & ~0x80) == 0x374) {
 			r->start |= 2;
 			r->end = r->start;
diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c
index 437ff39f7808..fba1f8bb03b5 100644
--- a/arch/arm/kernel/cpuidle.c
+++ b/arch/arm/kernel/cpuidle.c
@@ -5,7 +5,6 @@
 
 #include <linux/cpuidle.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <asm/cpuidle.h>
 
 extern struct of_cpuidle_method __cpuidle_method_of_table[];
diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c
index d8a509c5d5bd..20218876bef2 100644
--- a/arch/arm/kernel/isa.c
+++ b/arch/arm/kernel/isa.c
@@ -40,27 +40,11 @@ static struct ctl_table ctl_isa_vars[4] = {
 
 static struct ctl_table_header *isa_sysctl_header;
 
-static struct ctl_table ctl_isa[2] = {
-	{
-		.procname	= "isa",
-		.mode		= 0555,
-		.child		= ctl_isa_vars,
-	}, {}
-};
-
-static struct ctl_table ctl_bus[2] = {
-	{
-		.procname	= "bus",
-		.mode		= 0555,
-		.child		= ctl_isa,
-	}, {}
-};
-
 void __init
 register_isa_ports(unsigned int membase, unsigned int portbase, unsigned int portshift)
 {
 	isa_membase = membase;
 	isa_portbase = portbase;
 	isa_portshift = portshift;
-	isa_sysctl_header = register_sysctl_table(ctl_bus);
+	isa_sysctl_header = register_sysctl("bus/isa", ctl_isa_vars);
 }
diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c
index af7c322ebed6..f5a43fd8c163 100644
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -28,11 +28,6 @@ static const u32 fixed_plts[] = {
 #endif
 };
 
-static bool in_init(const struct module *mod, unsigned long loc)
-{
-	return loc - (u32)mod->init_layout.base < mod->init_layout.size;
-}
-
 static void prealloc_fixed(struct mod_plt_sec *pltsec, struct plt_entries *plt)
 {
 	int i;
@@ -50,8 +45,8 @@ static void prealloc_fixed(struct mod_plt_sec *pltsec, struct plt_entries *plt)
 
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 {
-	struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core :
-							  &mod->arch.init;
+	struct mod_plt_sec *pltsec = !within_module_init(loc, mod) ?
+						&mod->arch.core : &mod->arch.init;
 	struct plt_entries *plt;
 	int idx;
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index b350bfc9d1f8..87f8d0e5e314 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -319,7 +319,7 @@ void __cpu_die(unsigned int cpu)
  * of the other hotplug-cpu capable cores, so presumably coming
  * out of idle fixes this.
  */
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	unsigned int cpu = smp_processor_id();
 
@@ -381,6 +381,8 @@ void arch_cpu_idle_dead(void)
 		: "r" (task_stack_page(current) + THREAD_SIZE - 8),
 		  "r" (current)
 		: "r0");
+
+	unreachable();
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -776,7 +778,7 @@ void smp_send_stop(void)
  * kdump fails. So split out the panic_smp_self_stop() and add
  * set_cpu_online(smp_processor_id(), false).
  */
-void panic_smp_self_stop(void)
+void __noreturn panic_smp_self_stop(void)
 {
 	pr_debug("CPU %u will stop doing anything useful since another CPU has paniced\n",
 	         smp_processor_id());
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 14eecaaf295f..e4c2677cc1e9 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -116,7 +116,7 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memcpy((void *)to, from, tocopy);
+		__memcpy((void *)to, from, tocopy);
 		uaccess_restore(ua_flags);
 		to += tocopy;
 		from += tocopy;
@@ -178,7 +178,7 @@ __clear_user_memset(void __user *addr, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memset((void *)addr, 0, tocopy);
+		__memset((void *)addr, 0, tocopy);
 		uaccess_restore(ua_flags);
 		addr += tocopy;
 		n -= tocopy;
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index 185335843bbd..f236e12d7a59 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -31,34 +31,23 @@ static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
 int __init bcm_kona_smc_init(void)
 {
 	struct device_node *node;
-	const __be32 *prop_val;
-	u64 prop_size = 0;
-	unsigned long buffer_size;
-	u32 buffer_phys;
+	struct resource res;
+	int ret;
 
 	/* Read buffer addr and size from the device tree node */
 	node = of_find_matching_node(NULL, bcm_kona_smc_ids);
 	if (!node)
 		return -ENODEV;
 
-	prop_val = of_get_address(node, 0, &prop_size, NULL);
+	ret = of_address_to_resource(node, 0, &res);
 	of_node_put(node);
-	if (!prop_val)
+	if (ret)
 		return -EINVAL;
 
-	/* We assume space for four 32-bit arguments */
-	if (prop_size < 4 * sizeof(u32) || prop_size > (u64)ULONG_MAX)
-		return -EINVAL;
-	buffer_size = (unsigned long)prop_size;
-
-	buffer_phys = be32_to_cpup(prop_val);
-	if (!buffer_phys)
-		return -EINVAL;
-
-	bcm_smc_buffer = ioremap(buffer_phys, buffer_size);
+	bcm_smc_buffer = ioremap(res.start, resource_size(&res));
 	if (!bcm_smc_buffer)
 		return -ENOMEM;
-	bcm_smc_buffer_phys = buffer_phys;
+	bcm_smc_buffer_phys = res.start;
 
 	pr_info("Kona Secure API initialized\n");
 
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 754ca381f600..3044b7e03890 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -142,14 +142,14 @@ static struct pci_ops pcie_ops = {
 static void rc_pci_fixup(struct pci_dev *dev)
 {
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
+		struct resource *r;
 
 		dev->class &= 0xff;
 		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start = 0;
+			r->end   = 0;
+			r->flags = 0;
 		}
 	}
 }
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 51a247ca4da8..966a0995e047 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -50,11 +50,13 @@ void __init exynos_sysram_init(void)
 	struct device_node *node;
 
 	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+		struct resource res;
 		if (!of_device_is_available(node))
 			continue;
-		sysram_base_addr = of_iomap(node, 0);
-		sysram_base_phys = of_translate_address(node,
-					   of_get_address(node, 0, NULL, NULL));
+
+		of_address_to_resource(node, 0, &res);
+		sysram_base_addr = ioremap(res.start, resource_size(&res));
+		sysram_base_phys = res.start;
 		of_node_put(node);
 		break;
 	}
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 3bf14ca78b62..6d5d7696aaf7 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -667,7 +667,7 @@ void __init exynos_pm_init(void)
 		return;
 	}
 
-	if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
+	if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) {
 		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
 		of_node_put(np);
 		return;
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index ebc4339b8be4..5909088d5482 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -275,7 +275,7 @@ void __init imx_gpc_check_dt(void)
 	if (WARN_ON(!np))
 		return;
 
-	if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
+	if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) {
 		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
 
 		/* map GPC, so that at least CPUidle and WARs keep working */
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index c9d7c29d95e1..7f6200925752 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -79,7 +79,7 @@ static void __init imx6q_enet_phy_init(void)
 static void __init imx6q_1588_init(void)
 {
 	struct device_node *np;
-	struct clk *ptp_clk;
+	struct clk *ptp_clk, *fec_enet_ref;
 	struct clk *enet_ref;
 	struct regmap *gpr;
 	u32 clksel;
@@ -90,6 +90,14 @@ static void __init imx6q_1588_init(void)
 		return;
 	}
 
+	/*
+	 * If enet_clk_ref configured, we assume DT did it properly and .
+	 * clk-imx6q.c will do needed configuration.
+	 */
+	fec_enet_ref = of_clk_get_by_name(np, "enet_clk_ref");
+	if (!IS_ERR(fec_enet_ref))
+		goto put_node;
+
 	ptp_clk = of_clk_get(np, 2);
 	if (IS_ERR(ptp_clk)) {
 		pr_warn("%s: failed to get ptp clock\n", __func__);
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index dbf8d19cef11..7a0299de1db6 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -4,8 +4,6 @@
  */
 #include <linux/irqchip.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-#include <linux/micrel_phy.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
@@ -16,30 +14,12 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-static void __init imx6ul_enet_clk_init(void)
-{
-	struct regmap *gpr;
-
-	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr");
-	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6UL_GPR1_ENET_CLK_DIR,
-				   IMX6UL_GPR1_ENET_CLK_OUTPUT);
-	else
-		pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
-}
-
-static inline void imx6ul_enet_init(void)
-{
-	imx6ul_enet_clk_init();
-}
-
 static void __init imx6ul_init_machine(void)
 {
 	imx_print_silicon_rev(cpu_is_imx6ull() ? "i.MX6ULL" : "i.MX6UL",
 		imx_get_soc_revision());
 
 	of_platform_default_populate(NULL, NULL, NULL);
-	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();
 }
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index b9efe9da06e0..2157493b78a9 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -456,7 +456,7 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 	return pmu_mmdc->id;
 }
 
-static int imx_mmdc_remove(struct platform_device *pdev)
+static void imx_mmdc_remove(struct platform_device *pdev)
 {
 	struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
 
@@ -466,7 +466,6 @@ static int imx_mmdc_remove(struct platform_device *pdev)
 	iounmap(pmu_mmdc->mmdc_base);
 	clk_disable_unprepare(pmu_mmdc->mmdc_ipg_clk);
 	kfree(pmu_mmdc);
-	return 0;
 }
 
 static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base,
@@ -592,7 +591,7 @@ static struct platform_driver imx_mmdc_driver = {
 		.of_match_table = imx_mmdc_dt_ids,
 	},
 	.probe		= imx_mmdc_probe,
-	.remove		= imx_mmdc_remove,
+	.remove_new	= imx_mmdc_remove,
 };
 
 static int __init imx_mmdc_init(void)
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 85b0d9ddb7d8..8c1d4402fd69 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -76,10 +76,4 @@ config CPU_MMP2
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
 
-config USB_EHCI_MV_U2O
-        bool "EHCI support for PXA USB OTG controller"
-	depends on USB_EHCI_MV
-	help
-	  Enables support for OTG controller which can be switched to host mode.
-
 endif
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
index 5dbea7b485af..fa9709f30b46 100644
--- a/arch/arm/mach-mstar/Kconfig
+++ b/arch/arm/mach-mstar/Kconfig
@@ -20,11 +20,4 @@ config MACH_INFINITY
 	help
 	  Support for MStar/Sigmastar infinity IP camera SoCs.
 
-config MACH_MERCURY
-	bool "MStar/Sigmastar mercury SoC support"
-	default ARCH_MSTARV7
-	help
-	  Support for MStar/Sigmastar mercury dash camera SoCs.
-	  Note that older Mercury2 SoCs are ARM9 based and not supported.
-
 endif
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 9aa765d4cdc8..62e982f74bc2 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -14,6 +14,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "mv78xx0.h"
@@ -21,6 +24,11 @@
 #include "mpp.h"
 
 
+#define TSWXL_AUTO_SWITCH	15
+#define TSWXL_USB_POWER1	30
+#define TSWXL_USB_POWER2	31
+
+
 /* This arch has 2 Giga Ethernet */
 
 static struct mv643xx_eth_platform_data db78x00_ge00_data = {
@@ -39,7 +47,7 @@ static struct mv_sata_platform_data db78x00_sata_data = {
 };
 
 static struct i2c_board_info __initdata db78x00_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
+	I2C_BOARD_INFO("rs5c372a", 0x32),
 };
 
 
@@ -57,9 +65,9 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP10_GE1_RXD2,
 	MPP11_GE1_RXD3,
 	MPP12_GPIO,
-	MPP13_SYSRST_OUTn,
-	MPP14_SATA1_ACTn,
-	MPP15_SATA0_ACTn,
+	MPP13_GPIO,
+	MPP14_GPIO,
+	MPP15_GPIO,
 	MPP16_GPIO,
 	MPP17_GPIO,
 	MPP18_GPIO,
@@ -73,7 +81,7 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP26_UA2_CTSn,
 	MPP27_UA2_RTSn,
 	MPP28_GPIO,
-	MPP29_SYSRST_OUTn,
+	MPP29_GPIO,
 	MPP30_GPIO,
 	MPP31_GPIO,
 	MPP32_GPIO,
@@ -84,19 +92,41 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP37_GPIO,
 	MPP38_GPIO,
 	MPP39_GPIO,
-	MPP40_UNUSED,
-	MPP41_UNUSED,
-	MPP42_UNUSED,
-	MPP43_UNUSED,
-	MPP44_UNUSED,
-	MPP45_UNUSED,
-	MPP46_UNUSED,
-	MPP47_UNUSED,
-	MPP48_SATA1_ACTn,
-	MPP49_SATA0_ACTn,
+	MPP40_GPIO,
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	MPP49_GPIO,
 	0
 };
 
+static struct gpio_keys_button tswxl_buttons[] = {
+	{
+		.code	   = KEY_OPTION,
+		.gpio	   = TSWXL_AUTO_SWITCH,
+		.desc	   = "Power-auto Switch",
+		.active_low     = 1,
+	}
+};
+
+static struct gpio_keys_platform_data tswxl_button_data = {
+	.buttons	= tswxl_buttons,
+	.nbuttons       = ARRAY_SIZE(tswxl_buttons),
+};
+
+static struct platform_device tswxl_button_device = {
+	.name	   = "gpio-keys",
+	.id	     = -1,
+	.num_resources  = 0,
+	.dev	    = {
+		.platform_data  = &tswxl_button_data,
+	},
+};
 
 static void __init wxl_init(void)
 {
@@ -111,7 +141,6 @@ static void __init wxl_init(void)
 	 */
 	mv78xx0_ehci0_init();
 	mv78xx0_ehci1_init();
-	mv78xx0_ehci2_init();
 	mv78xx0_ge00_init(&db78x00_ge00_data);
 	mv78xx0_ge01_init(&db78x00_ge01_data);
 	mv78xx0_sata_init(&db78x00_sata_data);
@@ -119,22 +148,23 @@ static void __init wxl_init(void)
 	mv78xx0_uart1_init();
 	mv78xx0_uart2_init();
 	mv78xx0_uart3_init();
+	mv78xx0_xor_init();
+	mv78xx0_crypto_init();
 	mv78xx0_i2c_init();
 	i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+
+	//enable both usb ports
+	gpio_direction_output(TSWXL_USB_POWER1, 1);
+	gpio_direction_output(TSWXL_USB_POWER2, 1);
+
+	//enable rear switch
+	platform_device_register(&tswxl_button_device);
 }
 
 static int __init wxl_pci_init(void)
 {
-	if (machine_is_terastation_wxl()) {
-		/*
-		 * Assign the x16 PCIe slot on the board to CPU core
-		 * #0, and let CPU core #1 have the four x1 slots.
-		 */
-		if (mv78xx0_core_index() == 0)
-			mv78xx0_pcie_init(0, 1);
-		else
-			mv78xx0_pcie_init(1, 0);
-	}
+	if (machine_is_terastation_wxl() && mv78xx0_core_index() == 0)
+                mv78xx0_pcie_init(1, 1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 461a68945c26..679753fcc0ef 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -342,6 +342,29 @@ void __ref mv78xx0_timer_init(void)
 			IRQ_MV78XX0_TIMER_1, get_tclk());
 }
 
+/****************************************************************************
+* XOR engine
+****************************************************************************/
+void __init mv78xx0_xor_init(void)
+{
+	orion_xor0_init(XOR_PHYS_BASE,
+		XOR_PHYS_BASE + 0x200,
+		IRQ_MV78XX0_XOR_0, IRQ_MV78XX0_XOR_1);
+}
+
+/****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+****************************************************************************/
+void __init mv78xx0_crypto_init(void)
+{
+	mvebu_mbus_add_window_by_id(MV78XX0_MBUS_SRAM_TARGET,
+				MV78XX0_MBUS_SRAM_ATTR,
+				MV78XX0_SRAM_PHYS_BASE,
+			MV78XX0_SRAM_SIZE);
+	orion_crypto_init(CRYPTO_PHYS_BASE, MV78XX0_SRAM_PHYS_BASE,
+		SZ_8K, IRQ_MV78XX0_CRYPTO);
+}
+
 
 /*****************************************************************************
  * General
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index d8c6c2400e27..9f1dfd595003 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -43,6 +43,8 @@ void mv78xx0_uart0_init(void);
 void mv78xx0_uart1_init(void);
 void mv78xx0_uart2_init(void);
 void mv78xx0_uart3_init(void);
+void mv78xx0_xor_init(void);
+void mv78xx0_crypto_init(void);
 void mv78xx0_i2c_init(void);
 void mv78xx0_restart(enum reboot_mode, const char *);
 
diff --git a/arch/arm/mach-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h
index 3f19bef7d7ac..88efb1e44142 100644
--- a/arch/arm/mach-mv78xx0/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/mv78xx0.h
@@ -49,9 +49,15 @@
 #define MV78XX0_REGS_VIRT_BASE		IOMEM(0xfec00000)
 #define MV78XX0_REGS_SIZE		SZ_1M
 
+#define MV78XX0_SRAM_PHYS_BASE          (0xf2200000)
+#define MV78XX0_SRAM_SIZE               SZ_8K
+
 #define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
 #define MV78XX0_PCIE_MEM_SIZE		0x30000000
 
+#define MV78XX0_MBUS_SRAM_TARGET       0x09
+#define MV78XX0_MBUS_SRAM_ATTR         0x00
+
 /*
  * Core-specific peripheral registers.
  */
@@ -98,6 +104,8 @@
 #define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x51000)
 #define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x52000)
 
+#define XOR_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x60900)
+
 #define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x70000)
 #define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x74000)
 
@@ -106,6 +114,8 @@
 #define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x88000)
 #define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x8c000)
 
+#define CRYPTO_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE + 0x90000)
+
 #define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0xa0000)
 
 /*
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 6190f538a124..533cb7856943 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -42,7 +42,7 @@ void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
 
 u32 pcie_port_size[8] = {
 	0,
-	0x30000000,
+	0x20000000,
 	0x10000000,
 	0x10000000,
 	0x08000000,
@@ -186,14 +186,14 @@ static struct pci_ops pcie_ops = {
 static void rc_pci_fixup(struct pci_dev *dev)
 {
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
+		struct resource *r;
 
 		dev->class &= 0xff;
 		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start = 0;
+			r->end   = 0;
+			r->flags = 0;
 		}
 	}
 }
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 0129b7c514d7..51e47053c816 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -174,7 +174,7 @@ static void __init update_fec_mac_prop(enum mac_oui oui)
 
 		from = np;
 
-		if (of_get_property(np, "local-mac-address", NULL))
+		if (of_property_present(np, "local-mac-address"))
 			continue;
 
 		newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 8df9a4de0e79..cbf703f0d850 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -118,7 +118,7 @@ config MACH_OMAP_OSK
 	depends on ARCH_OMAP16XX
 	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
-          if you have such a board.
+	  if you have such a board.
 
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 0f67ac4c6fd2..9108c871d129 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -822,8 +822,6 @@ static int __init modem_nreset_init(void)
  */
 static int __init ams_delta_modem_init(void)
 {
-	int err;
-
 	if (!machine_is_ams_delta())
 		return -ENODEV;
 
@@ -832,9 +830,7 @@ static int __init ams_delta_modem_init(void)
 	/* Initialize the modem_nreset regulator consumer before use */
 	modem_priv.regulator = ERR_PTR(-ENODEV);
 
-	err = platform_device_register(&ams_delta_modem_device);
-
-	return err;
+	return platform_device_register(&ams_delta_modem_device);
 }
 arch_initcall_sync(ams_delta_modem_init);
 
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 9ccc784fd614..bfc7ab010ae2 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -41,6 +41,7 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
 
 #include <asm/irq.h>
 #include <asm/exception.h>
diff --git a/arch/arm/mach-omap1/omap-dma.c b/arch/arm/mach-omap1/omap-dma.c
index f7e62de427f3..9ee472f8ead1 100644
--- a/arch/arm/mach-omap1/omap-dma.c
+++ b/arch/arm/mach-omap1/omap-dma.c
@@ -833,7 +833,7 @@ exit_dma_irq_fail:
 	return ret;
 }
 
-static int omap_system_dma_remove(struct platform_device *pdev)
+static void omap_system_dma_remove(struct platform_device *pdev)
 {
 	int dma_irq, irq_rel = 0;
 
@@ -841,13 +841,11 @@ static int omap_system_dma_remove(struct platform_device *pdev)
 		dma_irq = platform_get_irq(pdev, irq_rel);
 		free_irq(dma_irq, (void *)(irq_rel + 1));
 	}
-
-	return 0;
 }
 
 static struct platform_driver omap_system_dma_driver = {
 	.probe		= omap_system_dma_probe,
-	.remove		= omap_system_dma_remove,
+	.remove_new	= omap_system_dma_remove,
 	.driver		= {
 		.name	= "omap_dma_system"
 	},
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3b53dda9ec79..821727eefd5a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -255,17 +255,6 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 
-config OMAP3_SDRC_AC_TIMING
-	bool "Enable SDRC AC timing register changes"
-	depends on ARCH_OMAP3
-	help
-	  If you know that none of your system initiators will attempt to
-	  access SDRAM during CORE DVFS, select Y here.  This should boost
-	  SDRAM performance at lower CORE OPPs.  There are relatively few
-	  users who will wish to say yes at this point - almost everyone will
-	  wish to say no.  Selecting yes without understanding what is
-	  going on could result in system crashes;
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index d61fa06117b4..c824d4e3db63 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
  * Vaibhav Hiremath <hvaibhav@ti.com>
  *
- * Reference taken from from OMAP4 cminst44xx.c
+ * Reference taken from OMAP4 cminst44xx.c
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5a2a9b8e61ed..aac4c4ee2528 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -706,9 +706,7 @@ static const struct of_device_id ti_clkctrl_match_table[] __initconst = {
 
 static int __init _setup_clkctrl_provider(struct device_node *np)
 {
-	const __be32 *addrp;
 	struct clkctrl_provider *provider;
-	u64 size;
 	int i;
 
 	provider = memblock_alloc(sizeof(*provider), SMP_CACHE_BYTES);
@@ -717,8 +715,7 @@ static int __init _setup_clkctrl_provider(struct device_node *np)
 
 	provider->node = np;
 
-	provider->num_addrs =
-		of_property_count_elems_of_size(np, "reg", sizeof(u32)) / 2;
+	provider->num_addrs = of_address_count(np);
 
 	provider->addr =
 		memblock_alloc(sizeof(void *) * provider->num_addrs,
@@ -733,11 +730,11 @@ static int __init _setup_clkctrl_provider(struct device_node *np)
 		return -ENOMEM;
 
 	for (i = 0; i < provider->num_addrs; i++) {
-		addrp = of_get_address(np, i, &size, NULL);
-		provider->addr[i] = (u32)of_translate_address(np, addrp);
-		provider->size[i] = size;
-		pr_debug("%s: %pOF: %x...%x\n", __func__, np, provider->addr[i],
-			 provider->addr[i] + provider->size[i]);
+		struct resource res;
+		of_address_to_resource(np, i, &res);
+		provider->addr[i] = res.start;
+		provider->size[i] = resource_size(&res);
+		pr_debug("%s: %pOF: %pR\n", __func__, np, &res);
 	}
 
 	list_add(&provider->link, &clkctrl_providers);
@@ -2322,11 +2319,11 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 static void __init parse_module_flags(struct omap_hwmod *oh,
 				      struct device_node *np)
 {
-	if (of_find_property(np, "ti,no-reset-on-init", NULL))
+	if (of_property_read_bool(np, "ti,no-reset-on-init"))
 		oh->flags |= HWMOD_INIT_NO_RESET;
-	if (of_find_property(np, "ti,no-idle-on-init", NULL))
+	if (of_property_read_bool(np, "ti,no-idle-on-init"))
 		oh->flags |= HWMOD_INIT_NO_IDLE;
-	if (of_find_property(np, "ti,no-idle", NULL))
+	if (of_property_read_bool(np, "ti,no-idle"))
 		oh->flags |= HWMOD_NO_IDLE;
 }
 
@@ -3457,7 +3454,7 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	}
 
 	if (list_empty(&oh->slave_ports)) {
-		oi = kcalloc(1, sizeof(*oi), GFP_KERNEL);
+		oi = kzalloc(sizeof(*oi), GFP_KERNEL);
 		if (!oi)
 			goto out_free_class;
 
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index baba73fd6f11..04208cc52784 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -6,6 +6,7 @@
  */
 #include <linux/clk.h>
 #include <linux/davinci_emac.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -108,7 +109,7 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev,
 	if (res)
 		return res;
 
-	gpio_export(gpio, 0);
+	gpiod_export(gpio_to_desc(gpio), 0);
 
 	return 0;
 }
@@ -123,7 +124,7 @@ static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
 		return;
 	}
 
-	gpio_export(gpio, 0);
+	gpiod_export(gpio_to_desc(gpio), 0);
 
 	udelay(10);
 	gpio_set_value(gpio, 1);
@@ -200,8 +201,8 @@ static void __init omap3_sbc_t3517_wifi_init(void)
 		return;
 	}
 
-	gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
-	gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
+	gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0);
+	gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0);
 
 	msleep(100);
 	gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index 711bcc6c8ddd..c907478be196 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -104,8 +104,6 @@ static int amx3_common_init(int (*idle)(u32 wfi_flags))
 
 static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
 {
-	int ret;
-
 	gfx_l4ls_clkdm = clkdm_lookup("gfx_l4ls_gfx_clkdm");
 
 	if (!gfx_l4ls_clkdm) {
@@ -113,9 +111,7 @@ static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
 		return -ENODEV;
 	}
 
-	ret = amx3_common_init(idle);
-
-	return ret;
+	return amx3_common_init(idle);
 }
 
 static int am43xx_suspend_init(int (*idle)(u32 wfi_flags))
diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c
index 596601367989..1c14e49a90a6 100644
--- a/arch/arm/mach-orion5x/board-rd88f5182.c
+++ b/arch/arm/mach-orion5x/board-rd88f5182.c
@@ -9,6 +9,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 888fdc9099c5..3313bc5a63ea 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -522,14 +522,14 @@ static int __init pci_setup(struct pci_sys_data *sys)
 static void rc_pci_fixup(struct pci_dev *dev)
 {
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
+		struct resource *r;
 
 		dev->class &= 0xff;
 		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start	= 0;
+			r->end		= 0;
+			r->flags	= 0;
 		}
 	}
 }
diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig
deleted file mode 100644
index a9ded7079268..000000000000
--- a/arch/arm/mach-oxnas/Kconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_OXNAS
-	bool "Oxford Semiconductor OXNAS Family SoCs"
-	depends on (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) || ARCH_MULTI_V6
-	select ARCH_HAS_RESET_CONTROLLER
-	select COMMON_CLK_OXNAS
-	select GPIOLIB
-	select MFD_SYSCON
-	select OXNAS_RPS_TIMER
-	select PINCTRL_OXNAS
-	select RESET_CONTROLLER
-	select RESET_OXNAS
-	select VERSATILE_FPGA_IRQ
-	select PINCTRL
-	help
-	  Support for OxNas SoC family developed by Oxford Semiconductor.
-
-if ARCH_OXNAS
-
-config MACH_OX810SE
-	bool "Support OX810SE Based Products"
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-	help
-	  Include Support for the Oxford Semiconductor OX810SE SoC Based Products.
-
-config MACH_OX820
-	bool "Support OX820 Based Products"
-	depends on ARCH_MULTI_V6
-	select ARM_GIC
-	select DMA_CACHE_RWFO if SMP
-	select HAVE_SMP
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	help
-	  Include Support for the Oxford Semiconductor OX820 SoC Based Products.
-
-endif
diff --git a/arch/arm/mach-oxnas/Makefile b/arch/arm/mach-oxnas/Makefile
deleted file mode 100644
index 0e78ecfe6c49..000000000000
--- a/arch/arm/mach-oxnas/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-oxnas/headsmp.S b/arch/arm/mach-oxnas/headsmp.S
deleted file mode 100644
index 9c0f1479f33a..000000000000
--- a/arch/arm/mach-oxnas/headsmp.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- * Copyright (c) 2003 ARM Limited
- * All Rights Reserved
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__INIT
-
-/*
- * OX820 specific entry point for secondary CPUs.
- */
-ENTRY(ox820_secondary_startup)
-	mov r4, #0
-	/* invalidate both caches and branch target cache */
-	mcr p15, 0, r4, c7, c7, 0
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
diff --git a/arch/arm/mach-oxnas/platsmp.c b/arch/arm/mach-oxnas/platsmp.c
deleted file mode 100644
index f0a50b9e61df..000000000000
--- a/arch/arm/mach-oxnas/platsmp.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- */
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-
-extern void ox820_secondary_startup(void);
-
-static void __iomem *cpu_ctrl;
-static void __iomem *gic_cpu_ctrl;
-
-#define HOLDINGPEN_CPU_OFFSET		0xc8
-#define HOLDINGPEN_LOCATION_OFFSET	0xc4
-
-#define GIC_NCPU_OFFSET(cpu)		(0x100 + (cpu)*0x100)
-#define GIC_CPU_CTRL			0x00
-#define GIC_CPU_CTRL_ENABLE		1
-
-static int __init ox820_boot_secondary(unsigned int cpu,
-		struct task_struct *idle)
-{
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The BootMonitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	writel(virt_to_phys(ox820_secondary_startup),
-			cpu_ctrl + HOLDINGPEN_LOCATION_OFFSET);
-
-	writel(cpu, cpu_ctrl + HOLDINGPEN_CPU_OFFSET);
-
-	/*
-	 * Enable GIC cpu interface in CPU Interface Control Register
-	 */
-	writel(GIC_CPU_CTRL_ENABLE,
-		gic_cpu_ctrl + GIC_NCPU_OFFSET(cpu) + GIC_CPU_CTRL);
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
-	return 0;
-}
-
-static void __init ox820_smp_prepare_cpus(unsigned int max_cpus)
-{
-	struct device_node *np;
-	void __iomem *scu_base;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-scu");
-	scu_base = of_iomap(np, 0);
-	of_node_put(np);
-	if (!scu_base)
-		return;
-
-	/* Remap CPU Interrupt Interface Registers */
-	np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-gic");
-	gic_cpu_ctrl = of_iomap(np, 1);
-	of_node_put(np);
-	if (!gic_cpu_ctrl)
-		goto unmap_scu;
-
-	np = of_find_compatible_node(NULL, NULL, "oxsemi,ox820-sys-ctrl");
-	cpu_ctrl = of_iomap(np, 0);
-	of_node_put(np);
-	if (!cpu_ctrl)
-		goto unmap_scu;
-
-	scu_enable(scu_base);
-	flush_cache_all();
-
-unmap_scu:
-	iounmap(scu_base);
-}
-
-static const struct smp_operations ox820_smp_ops __initconst = {
-	.smp_prepare_cpus	= ox820_smp_prepare_cpus,
-	.smp_boot_secondary	= ox820_boot_secondary,
-};
-
-CPU_METHOD_OF_DECLARE(ox820_smp, "oxsemi,ox820-smp", &ox820_smp_ops);
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 96f33ef1d9ea..a9ef71008147 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -257,8 +257,7 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int))
 	}
 	pxa_irq_base = io_p2v(res.start);
 
-	if (of_find_property(node, "marvell,intc-priority", NULL))
-		cpu_has_ipr = 1;
+	cpu_has_ipr = of_property_read_bool(node, "marvell,intc-priority");
 
 	ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0);
 	if (ret < 0) {
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 929cc51ed7c2..d29bdcd5270e 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -890,7 +890,7 @@ static int sharpsl_pm_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int sharpsl_pm_remove(struct platform_device *pdev)
+static void sharpsl_pm_remove(struct platform_device *pdev)
 {
 	suspend_set_ops(NULL);
 
@@ -917,13 +917,11 @@ static int sharpsl_pm_remove(struct platform_device *pdev)
 
 	del_timer_sync(&sharpsl_pm.chrg_full_timer);
 	del_timer_sync(&sharpsl_pm.ac_timer);
-
-	return 0;
 }
 
 static struct platform_driver sharpsl_pm_driver = {
 	.probe		= sharpsl_pm_probe,
-	.remove		= sharpsl_pm_remove,
+	.remove_new	= sharpsl_pm_remove,
 	.suspend	= sharpsl_pm_suspend,
 	.resume		= sharpsl_pm_resume,
 	.driver		= {
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index 53813f9464a2..c30df1097c52 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -253,7 +253,7 @@ static int ecard_init_mm(void)
 	current->mm = mm;
 	current->active_mm = mm;
 	activate_mm(active_mm, mm);
-	mmdrop(active_mm);
+	mmdrop_lazy_tlb(active_mm);
 	ecard_init_pgtables(mm);
 	return 0;
 }
diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c
index e97bd59083a8..9f9717874d67 100644
--- a/arch/arm/mach-s3c/s3c64xx.c
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -21,13 +21,13 @@
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
 #include <linux/clk/samsung.h>
 #include <linux/dma-mapping.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/irqchip/arm-vic.h>
 #include <clocksource/samsung_pwm.h>
 
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 2eba112f2ad8..d000c678b439 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio/gpio-reg.h>
 #include <linux/gpio/machine.h>
 #include <linux/gpio_keys.h>
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 1dbe98948ce3..67f72ca984b2 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -175,18 +175,17 @@ static int jornada_ssp_probe(struct platform_device *dev)
 	return 0;
 };
 
-static int jornada_ssp_remove(struct platform_device *dev)
+static void jornada_ssp_remove(struct platform_device *dev)
 {
 	/* Note that this doesn't actually remove the driver, since theres nothing to remove
 	 * It just makes sure everything is turned off */
 	GPSR = GPIO_GPIO25;
 	ssp_exit();
-	return 0;
 };
 
 struct platform_driver jornadassp_driver = {
 	.probe	= jornada_ssp_probe,
-	.remove	= jornada_ssp_remove,
+	.remove_new = jornada_ssp_remove,
 	.driver	= {
 		.name	= "jornada_ssp",
 	},
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 6876bc1e33b4..0ef0ebbf31ac 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -376,7 +376,7 @@ static int neponset_probe(struct platform_device *dev)
 	return ret;
 }
 
-static int neponset_remove(struct platform_device *dev)
+static void neponset_remove(struct platform_device *dev)
 {
 	struct neponset_drvdata *d = platform_get_drvdata(dev);
 	int irq = platform_get_irq(dev, 0);
@@ -395,8 +395,6 @@ static int neponset_remove(struct platform_device *dev)
 	nep = NULL;
 	iounmap(d->base);
 	kfree(d);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -425,7 +423,7 @@ static const struct dev_pm_ops neponset_pm_ops = {
 
 static struct platform_driver neponset_device_driver = {
 	.probe		= neponset_probe,
-	.remove		= neponset_remove,
+	.remove_new	= neponset_remove,
 	.driver		= {
 		.name	= "neponset",
 		.pm	= PM_OPS,
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index e771ce70e132..ec6f421c0f4d 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/suspend.h>
@@ -210,7 +211,6 @@ static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit))
 	struct device_node *np_apmu, *np_cpu;
 	struct resource res;
 	int bit, index;
-	u32 id;
 
 	for_each_matching_node(np_apmu, apmu_ids) {
 		/* only enable the cluster that includes the boot CPU */
@@ -218,33 +218,29 @@ static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit))
 
 		for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
 			np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
-			if (np_cpu) {
-				if (!of_property_read_u32(np_cpu, "reg", &id)) {
-					if (id == cpu_logical_map(0)) {
-						is_allowed = true;
-						of_node_put(np_cpu);
-						break;
-					}
-
-				}
+			if (!np_cpu)
+				break;
+			if (of_cpu_node_to_id(np_cpu) == 0) {
+				is_allowed = true;
 				of_node_put(np_cpu);
+				break;
 			}
+			of_node_put(np_cpu);
 		}
 		if (!is_allowed)
 			continue;
 
 		for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
 			np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
-			if (np_cpu) {
-				if (!of_property_read_u32(np_cpu, "reg", &id)) {
-					index = get_logical_index(id);
-					if ((index >= 0) &&
-					    !of_address_to_resource(np_apmu,
-								    0, &res))
-						fn(&res, index, bit);
-				}
-				of_node_put(np_cpu);
-			}
+			if (!np_cpu)
+				break;
+
+			index = of_cpu_node_to_id(np_cpu);
+			if ((index >= 0) &&
+			    !of_address_to_resource(np_apmu, 0, &res))
+				fn(&res, index, bit);
+
+			of_node_put(np_cpu);
 		}
 	}
 }
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 1add7ee49b63..7108ad628f8d 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -81,12 +81,6 @@ config ARCH_SPEAR6XX
 	help
 	  Supports for ARM's SPEAR6XX family
 
-config MACH_SPEAR600
-	def_bool y
-	depends on ARCH_SPEAR6XX
-	help
-	  Supports ST SPEAr600 boards configured via the device-tree
-
 config ARCH_SPEAR_AUTO
 	bool
 	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index 2ccaa11aaa56..5dcc4ddd1a56 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -21,6 +21,7 @@ static const char *const stm32_compat[] __initconst = {
 	"st,stm32mp131",
 	"st,stm32mp133",
 	"st,stm32mp135",
+	"st,stm32mp151",
 	"st,stm32mp157",
 	NULL
 };
diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c
index 26cbce135338..cb63921232a6 100644
--- a/arch/arm/mach-sunxi/mc_smp.c
+++ b/arch/arm/mach-sunxi/mc_smp.c
@@ -19,7 +19,6 @@
 #include <linux/irqchip/arm-gic.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_device.h>
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c5bbae86f725..be183ed1232d 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -403,7 +403,7 @@ config CPU_V6K
 	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V6 if MMU
 
-# ARMv7
+# ARMv7 and ARMv8 architectures
 config CPU_V7
 	bool
 	select CPU_32v6K
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 8bc01071474a..b4a33358d2e9 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -1543,7 +1543,7 @@ static const struct dma_map_ops iommu_ops = {
  * arm_iommu_attach_device function.
  */
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size)
+arm_iommu_create_mapping(const struct bus_type *bus, dma_addr_t base, u64 size)
 {
 	unsigned int bits = size >> PAGE_SHIFT;
 	unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long);
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 3ef9ecdd6343..595e9cb33c1d 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -18,7 +18,8 @@
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h>
 #include <linux/leds.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
@@ -312,7 +313,7 @@ int orion_gpio_led_blink_set(struct gpio_desc *desc, int state,
 	case GPIO_LED_NO_BLINK_LOW:
 	case GPIO_LED_NO_BLINK_HIGH:
 		orion_gpio_set_blink(gpio, 0);
-		gpio_set_value(gpio, state);
+		gpiod_set_raw_value(desc, state);
 		break;
 	case GPIO_LED_BLINK:
 		orion_gpio_set_blink(gpio, 1);
diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile
index a7ec06ce3785..515ca33b854c 100644
--- a/arch/arm/vdso/Makefile
+++ b/arch/arm/vdso/Makefile
@@ -1,8 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
-# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before
-# the inclusion of generic Makefile.
-ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32
+# Include the generic Makefile to check the built vdso.
 include $(srctree)/lib/vdso/Makefile
 
 hostprogs := vdsomunge
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 9a89264cdcc0..7483ef8bccda 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -22,18 +22,7 @@
 @  IRQs enabled.
 @
 ENTRY(do_vfp)
-	local_bh_disable r10, r4
- 	ldr	r4, .LCvfp
-	ldr	r11, [r10, #TI_CPU]	@ CPU number
-	add	r10, r10, #TI_VFPSTATE	@ r10 = workspace
-	ldr	pc, [r4]		@ call VFP entry point
+	mov	r1, r10
+	mov	r3, r9
+	b	vfp_entry
 ENDPROC(do_vfp)
-
-ENTRY(vfp_null_entry)
-	local_bh_enable_ti r10, r4
-	ret	lr
-ENDPROC(vfp_null_entry)
-
-	.align	2
-.LCvfp:
-	.word	vfp_vector
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 26c4f61ecfa3..4d8478264d82 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -6,9 +6,9 @@
  *  Written by Deep Blue Solutions Limited.
  *
  * This code is called from the kernel's undefined instruction trap.
- * r9 holds the return address for successful handling.
+ * r1 holds the thread_info pointer
+ * r3 holds the return address for successful handling.
  * lr holds the return address for unrecognised instructions.
- * r10 points at the start of the private FP workspace in the thread structure
  * sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
  */
 #include <linux/init.h>
@@ -69,13 +69,15 @@
 @ VFP hardware support entry point.
 @
 @  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
+@  r1  = thread_info pointer
 @  r2  = PC value to resume execution after successful emulation
-@  r9  = normal "successful" return address
-@  r10 = vfp_state union
-@  r11 = CPU number
+@  r3  = normal "successful" return address
 @  lr  = unrecognised instruction return address
 @  IRQs enabled.
 ENTRY(vfp_support_entry)
+	ldr	r11, [r1, #TI_CPU]	@ CPU number
+	add	r10, r1, #TI_VFPSTATE	@ r10 = workspace
+
 	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
 
 	.fpu	vfpv2
@@ -85,9 +87,9 @@ ENTRY(vfp_support_entry)
 	bne	look_for_VFP_exceptions	@ VFP is already enabled
 
 	DBGSTR1 "enable %x", r10
-	ldr	r3, vfp_current_hw_state_address
+	ldr	r9, vfp_current_hw_state_address
 	orr	r1, r1, #FPEXC_EN	@ user FPEXC has the enable bit set
-	ldr	r4, [r3, r11, lsl #2]	@ vfp_current_hw_state pointer
+	ldr	r4, [r9, r11, lsl #2]	@ vfp_current_hw_state pointer
 	bic	r5, r1, #FPEXC_EX	@ make sure exceptions are disabled
 	cmp	r4, r10			@ this thread owns the hw context?
 #ifndef CONFIG_SMP
@@ -146,7 +148,7 @@ vfp_reload_hw:
 #endif
 
 	DBGSTR1	"load state %p", r10
-	str	r10, [r3, r11, lsl #2]	@ update the vfp_current_hw_state pointer
+	str	r10, [r9, r11, lsl #2]	@ update the vfp_current_hw_state pointer
 					@ Load the saved state back into the VFP
 	VFPFLDMIA r10, r5		@ reload the working registers while
 					@ FPEXC is in a safe state
@@ -175,9 +177,12 @@ vfp_hw_state_valid:
 					@ else it's one 32-bit instruction, so
 					@ always subtract 4 from the following
 					@ instruction address.
-	local_bh_enable_ti r10, r4
-	ret	r9			@ we think we have handled things
 
+	mov	lr, r3			@ we think we have handled things
+local_bh_enable_and_ret:
+	adr	r0, .
+	mov	r1, #SOFTIRQ_DISABLE_OFFSET
+	b	__local_bh_enable_ip	@ tail call
 
 look_for_VFP_exceptions:
 	@ Check for synchronous or asynchronous exception
@@ -200,13 +205,12 @@ skip:
 	@ not recognised by VFP
 
 	DBGSTR	"not VFP"
-	local_bh_enable_ti r10, r4
-	ret	lr
+	b	local_bh_enable_and_ret
 
 process_exception:
 	DBGSTR	"bounce"
 	mov	r2, sp			@ nothing stacked - regdump is at TOS
-	mov	lr, r9			@ setup for a return to the user code.
+	mov	lr, r3			@ setup for a return to the user code.
 
 	@ Now call the C code to package up the bounce to the support code
 	@   r0 holds the trigger instruction
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 01bc48d73847..349dcb944a93 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -32,10 +32,9 @@
 /*
  * Our undef handlers (in entry.S)
  */
-asmlinkage void vfp_support_entry(void);
-asmlinkage void vfp_null_entry(void);
+asmlinkage void vfp_support_entry(u32, void *, u32, u32);
 
-asmlinkage void (*vfp_vector)(void) = vfp_null_entry;
+static bool have_vfp __ro_after_init;
 
 /*
  * Dual-use variable.
@@ -645,6 +644,25 @@ static int vfp_starting_cpu(unsigned int unused)
 	return 0;
 }
 
+/*
+ * Entered with:
+ *
+ *  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
+ *  r1  = thread_info pointer
+ *  r2  = PC value to resume execution after successful emulation
+ *  r3  = normal "successful" return address
+ *  lr  = unrecognised instruction return address
+ */
+asmlinkage void vfp_entry(u32 trigger, struct thread_info *ti, u32 resume_pc,
+			  u32 resume_return_address)
+{
+	if (unlikely(!have_vfp))
+		return;
+
+	local_bh_disable();
+	vfp_support_entry(trigger, ti, resume_pc, resume_return_address);
+}
+
 #ifdef CONFIG_KERNEL_MODE_NEON
 
 static int vfp_kmode_exception(struct pt_regs *regs, unsigned int instr)
@@ -798,7 +816,6 @@ static int __init vfp_init(void)
 	vfpsid = fmrx(FPSID);
 	barrier();
 	unregister_undef_hook(&vfp_detect_hook);
-	vfp_vector = vfp_null_entry;
 
 	pr_info("VFP support v0.3: ");
 	if (VFP_arch) {
@@ -883,7 +900,7 @@ static int __init vfp_init(void)
 				  "arm/vfp:starting", vfp_starting_cpu,
 				  vfp_dying_cpu);
 
-	vfp_vector = vfp_support_entry;
+	have_vfp = true;
 
 	thread_register_notifier(&vfp_notifier_block);
 	vfp_pm_init();
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1023e896d46b..b1201d25a8a4 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -95,6 +95,7 @@ config ARM64
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_SUPPORTS_PAGE_TABLE_CHECK
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
 	select ARCH_WANT_DEFAULT_BPF_JIT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
@@ -145,6 +146,7 @@ config ARM64
 	select GENERIC_GETTIMEOFDAY
 	select GENERIC_VDSO_TIME_NS
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT
 	select HAVE_MOVE_PMD
 	select HAVE_MOVE_PUD
 	select HAVE_PCI
@@ -185,6 +187,10 @@ config ARM64
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_DYNAMIC_FTRACE_WITH_ARGS \
+		if $(cc-option,-fpatchable-function-entry=2)
+	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS \
+		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
 	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
 		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \
 		    !CC_OPTIMIZE_FOR_SIZE)
@@ -362,6 +368,20 @@ config ARCH_PROC_KCORE_TEXT
 config BROKEN_GAS_INST
 	def_bool !$(as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n)
 
+config BUILTIN_RETURN_ADDRESS_STRIPS_PAC
+	bool
+	# Clang's __builtin_return_adddress() strips the PAC since 12.0.0
+	# https://reviews.llvm.org/D75044
+	default y if CC_IS_CLANG && (CLANG_VERSION >= 120000)
+	# GCC's __builtin_return_address() strips the PAC since 11.1.0,
+	# and this was backported to 10.2.0, 9.4.0, 8.5.0, but not earlier
+	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94891
+	default y if CC_IS_GCC && (GCC_VERSION >= 110100)
+	default y if CC_IS_GCC && (GCC_VERSION >= 100200) && (GCC_VERSION < 110000)
+	default y if CC_IS_GCC && (GCC_VERSION >=  90400) && (GCC_VERSION < 100000)
+	default y if CC_IS_GCC && (GCC_VERSION >=  80500) && (GCC_VERSION <  90000)
+	default n
+
 config KASAN_SHADOW_OFFSET
 	hex
 	depends on KASAN_GENERIC || KASAN_SW_TAGS
@@ -1150,6 +1170,16 @@ config NVIDIA_CARMEL_CNP_ERRATUM
 
 	  If unsure, say Y.
 
+config ROCKCHIP_ERRATUM_3588001
+	bool "Rockchip 3588001: GIC600 can not support shareability attributes"
+	default y
+	help
+	  The Rockchip RK3588 GIC600 SoC integration does not support ACE/ACE-lite.
+	  This means, that its sharability feature may not be used, even though it
+	  is supported by the IP itself.
+
+	  If unsure, say Y.
+
 config SOCIONEXT_SYNQUACER_PREITS
 	bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
 	default y
@@ -1476,39 +1506,34 @@ config XEN
 
 # include/linux/mmzone.h requires the following to be true:
 #
-#   MAX_ORDER - 1 + PAGE_SHIFT <= SECTION_SIZE_BITS
+#   MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
 #
-# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS + 1 - PAGE_SHIFT:
+# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
 #
 #     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_ORDER  |  default MAX_ORDER |
 # ----+-------------------+--------------+-----------------+--------------------+
-# 4K  |       27          |      12      |       16        |         11         |
-# 16K |       27          |      14      |       14        |         12         |
-# 64K |       29          |      16      |       14        |         14         |
+# 4K  |       27          |      12      |       15        |         10         |
+# 16K |       27          |      14      |       13        |         11         |
+# 64K |       29          |      16      |       13        |         13         |
 config ARCH_FORCE_MAX_ORDER
-	int "Maximum zone order" if ARM64_4K_PAGES || ARM64_16K_PAGES
-	default "14" if ARM64_64K_PAGES
-	range 12 14 if ARM64_16K_PAGES
-	default "12" if ARM64_16K_PAGES
-	range 11 16 if ARM64_4K_PAGES
-	default "11"
-	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
-
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
-
-	  We make sure that we can allocate up to a HugePage size for each configuration.
-	  Hence we have :
-		MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2
-
-	  However for 4K, we choose a higher default value, 11 as opposed to 10, giving us
-	  4M allocations matching the default size used by generic code.
+	int "Order of maximal physically contiguous allocations" if EXPERT && (ARM64_4K_PAGES || ARM64_16K_PAGES)
+	default "13" if ARM64_64K_PAGES
+	default "11" if ARM64_16K_PAGES
+	default "10"
+	help
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
+
+	  The maximal size of allocation cannot exceed the size of the
+	  section, so the value of MAX_ORDER should satisfy
+
+	    MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+
+	  Don't change if unsure.
 
 config UNMAP_KERNEL_AT_EL0
 	bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index b5c1ff19b4c4..ce3ae19e72db 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -3,6 +3,7 @@
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index ccf1ba57fa87..cd1c5b04890a 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -8,7 +8,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
@@ -17,6 +19,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-bananapi-m2s.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index d2f7cb4e5375..eed96f262844 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -125,6 +125,16 @@
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
+
+			gpio_intc: interrupt-controller@0440 {
+				compatible = "amlogic,meson-a1-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x0440 0x0 0x14>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<49 50 51 52 53 54 55 56>;
+			};
 		};
 
 		gic: interrupt-controller@ff901000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
index e1605a9b0a13..db605f3a22b4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -159,7 +159,6 @@
 	onewire {
 		compatible = "w1-gpio";
 		gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
-		#gpio-cells = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 123a56f7f818..0c49655cc90c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1571,15 +1571,20 @@
 
 			dmc: bus@38000 {
 				compatible = "simple-bus";
-				reg = <0x0 0x38000 0x0 0x400>;
 				#address-cells = <2>;
 				#size-cells = <2>;
-				ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>;
 
 				canvas: video-lut@48 {
 					compatible = "amlogic,canvas";
 					reg = <0x0 0x48 0x0 0x14>;
 				};
+
+				pmu: pmu@80 {
+					reg = <0x0 0x80 0x0 0x40>,
+					      <0x0 0xc00 0x0 0x40>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+				};
 			};
 
 			usb2_phy1: phy@3a000 {
@@ -1705,12 +1710,6 @@
 			};
 		};
 
-		pmu: pmu@ff638000 {
-			reg = <0x0 0xff638000 0x0 0x100>,
-			      <0x0 0xff638c00 0x0 0x100>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
-		};
-
 		aobus: bus@ff800000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xff800000 0x0 0x100000>;
@@ -2046,7 +2045,8 @@
 			};
 
 			uart_AO: serial@3000 {
-				compatible = "amlogic,meson-gx-uart",
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
@@ -2056,7 +2056,8 @@
 			};
 
 			uart_AO_B: serial@4000 {
-				compatible = "amlogic,meson-gx-uart",
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x4000 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
@@ -2293,7 +2294,8 @@
 			};
 
 			uart_C: serial@22000 {
-				compatible = "amlogic,meson-gx-uart";
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
 				reg = <0x0 0x22000 0x0 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
@@ -2302,7 +2304,8 @@
 			};
 
 			uart_B: serial@23000 {
-				compatible = "amlogic,meson-gx-uart";
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
 				reg = <0x0 0x23000 0x0 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
@@ -2311,7 +2314,8 @@
 			};
 
 			uart_A: serial@24000 {
-				compatible = "amlogic,meson-gx-uart";
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
 				reg = <0x0 0x24000 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
new file mode 100644
index 000000000000..ac6f7ae1d103
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-bananapi.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b";
+	model = "BananaPi M2S";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+};
+
+/* Camera (CSI) bus */
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
+	pinctrl-names = "default";
+};
+
+/* Display (DSI) bus */
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&npu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
new file mode 100644
index 000000000000..1b0c3881c6a1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-bananapi-cm4.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
+	model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-CM4IO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing =	"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&cecb_AO {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* CSI port */
+&i2c1 {
+	status = "okay";
+};
+
+/* DSI port for touchscreen */
+&i2c3 {
+	status = "okay";
+};
+
+/* miniPCIe port with USB + SIM slot */
+&pcie {
+	status = "okay";
+};
+
+&sd_emmc_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+/* Peripheral Only USB-C port */
+&usb {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
new file mode 100644
index 000000000000..97e522921b06
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#include "meson-g12b-a311d.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddio_c: regulator-vddio-c {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_C";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+
+		gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>;
+		gpios-states = <1>;
+
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1040000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1040000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Ethernet to be enabled in baseboard DT */
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+/* HDMI to be enabled in baseboard DT */
+&hdmi_tx {
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&dc_in>;
+};
+
+/* "Camera" I2C bus */
+&i2c1 {
+	pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
+	pinctrl-names = "default";
+};
+
+/* Main I2C bus */
+&i2c2 {
+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+	pinctrl-names = "default";
+};
+
+/* "ID" I2C bus */
+&i2c3 {
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vddao_1v8>;
+
+	status = "okay";
+};
+
+/* on-module SDIO WiFi */
+&sd_emmc_a {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	sd-uhs-sdr104;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+
+	status = "okay";
+
+	rtl8822cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* SD card to be enabled in baseboard DT */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_c>;
+};
+
+/* on-module eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+/* on-module UART BT */
+&uart_A {
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
new file mode 100644
index 000000000000..83709787eb91
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -0,0 +1,521 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "RST";
+			linux,code = <KEY_POWER>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		cooling-levels = <0 120 170 220>;
+		pwms = <&pwm_cd 1 40000 0>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+		pwm-supply = <&dc_in>;
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+		pwm-supply = <&vsys_3v3>;
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vsys_3v3: regulator-vsys-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-M2S";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* Main i2c bus */
+&i2c2 {
+	status = "okay";
+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	status = "okay";
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_d_x6_pins>;
+	pinctrl-names = "default";
+	pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	/* enable if WiFi/BT board connected */
+	status = "disabled";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	sd-uhs-sdr104;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	rtl8822cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vsys_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	/* enable if WiFi/BT board connected */
+	status = "disabled";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
index c8e5a0a42b89..29d642e746d4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -620,7 +620,7 @@
 };
 
 &periphs_pinctrl {
-	keypad_gpio_pins: keypad-gpio {
+	keypad_gpio_pins: keypad-gpio-state {
 		mux {
 			groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3",
 			         "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7",
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
index 9a60c5ec2072..890f5bfebb03 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -360,7 +360,7 @@
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
 	clocks = <&xtal>;
-	clock-names = "clkin2";
+	clock-names = "clkin0";
 	status = "okay";
 };
 
@@ -368,7 +368,7 @@
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
 	clocks = <&xtal>;
-	clock-names = "clkin3";
+	clock-names = "clkin0";
 	status = "okay";
 };
 
@@ -376,7 +376,7 @@
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
 	clocks = <&xtal>;
-	clock-names = "clkin4";
+	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts
new file mode 100644
index 000000000000..7f66f263a2ce
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include "meson-g12b-bananapi.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b";
+	model = "BananaPi M2S";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 5f2d4317ecfb..e238f1f10124 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -6,21 +6,29 @@
 /dts-v1/;
 
 #include "meson-gxbb-p20x.dtsi"
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
 / {
 	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
 	model = "Videostrong KII Pro";
 
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led {
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
+			default-state = "off";
 		};
 	};
 
@@ -35,22 +43,58 @@
 		};
 	};
 
-};
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "KII-PRO";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
 
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
 
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
 
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
 
-	bluetooth {
-		compatible = "brcm,bcm4335a0";
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
 	};
 };
 
-
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
+};
 
 &ethmac {
 	status = "okay";
@@ -78,3 +122,19 @@
 &ir {
 	linux,rc-map-name = "rc-videostrong-kii-pro";
 };
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4335a0";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 923d2d8bbb9c..12ef6e81c8bd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -300,8 +300,8 @@
 };
 
 &gpio_intc {
-	compatible = "amlogic,meson-gpio-intc",
-		     "amlogic,meson-gxbb-gpio-intc";
+	compatible = "amlogic,meson-gxbb-gpio-intc",
+		     "amlogic,meson-gpio-intc";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
index 874f91c348ec..6c4e68e0e625 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
@@ -305,7 +305,6 @@
 };
 
 &usb2_phy0 {
-	pinctrl-names = "default";
 	phy-supply = <&vcc5v>;
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 5905a6df09b0..17bcfa4702e1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -312,8 +312,8 @@
 };
 
 &gpio_intc {
-	compatible = "amlogic,meson-gpio-intc",
-		     "amlogic,meson-gxl-gpio-intc";
+	compatible = "amlogic,meson-gxl-gpio-intc",
+		     "amlogic,meson-gpio-intc";
 	status = "okay";
 };
 
@@ -773,16 +773,23 @@
 		};
 	};
 
-	eth-phy-mux@55c {
-		compatible = "mdio-mux-mmioreg", "mdio-mux";
+	eth_phy_mux: mdio@558 {
+		reg = <0x0 0x558 0x0 0xc>;
+		compatible = "amlogic,gxl-mdio-mux";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		reg = <0x0 0x55c 0x0 0x4>;
-		mux-mask = <0xffffffff>;
+		clocks = <&clkc CLKID_FCLK_DIV4>;
+		clock-names = "ref";
 		mdio-parent-bus = <&mdio0>;
 
-		internal_mdio: mdio@e40908ff {
-			reg = <0xe40908ff>;
+		external_mdio: mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		internal_mdio: mdio@1 {
+			reg = <0x1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -793,12 +800,6 @@
 				max-speed = <100>;
 			};
 		};
-
-		external_mdio: mdio@2009087f {
-			reg = <0x2009087f>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
index 444c249863cb..4eda9f634c42 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
@@ -54,6 +54,10 @@
 		vbus-supply = <&typec2_vbus>;
 
 		status = "okay";
+
+		connector {
+			compatible = "usb-c-connector";
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index ad50cba42d19..f24460186d3d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -85,7 +85,7 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
-		apb4: apb4@fe000000 {
+		apb4: bus@fe000000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xfe000000 0x0 0x480000>;
 			#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index bb492581f1b7..17045ff81c69 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -105,7 +105,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
@@ -316,7 +316,7 @@
 	 * be handled by a USB specific power sequence to reset the Hub
 	 * when the USB bus is powered down.
 	 */
-	usb-hub {
+	usb-hub-hog {
 		gpio-hog;
 		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index ddb1b345397f..2fce44939f45 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
index 5a7506ff5ea3..aec5e29cdfb7 100644
--- a/arch/arm64/boot/dts/apple/Makefile
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -10,3 +10,6 @@ dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb
diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
index 1c41954e3899..b1c875e692c8 100644
--- a/arch/arm64/boot/dts/apple/t600x-die0.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -71,6 +71,15 @@
 		power-domains = <&ps_sio_cpu>;
 	};
 
+	fpwm0: pwm@39b030000 {
+		compatible = "apple,t6000-fpwm", "apple,s5l-fpwm";
+		reg = <0x3 0x9b030000 0x0 0x4000>;
+		power-domains = <&ps_fpwm0>;
+		clocks = <&clkref>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
 	i2c0: i2c@39b040000 {
 		compatible = "apple,t6000-i2c", "apple,i2c";
 		reg = <0x3 0x9b040000 0x0 0x4000>;
@@ -233,6 +242,7 @@
 		interrupt-parent = <&aic>;
 		interrupts = <AIC_IRQ 0 1277 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
 	};
 
 	pcie0_dart_3: iommu@584008000 {
@@ -242,6 +252,7 @@
 		interrupt-parent = <&aic>;
 		interrupts = <AIC_IRQ 0 1280 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
 	};
 
 	pcie0: pcie@590000000 {
@@ -338,6 +349,7 @@
 					<0 0 0 2 &port02 0 0 0 1>,
 					<0 0 0 3 &port02 0 0 0 2>,
 					<0 0 0 4 &port02 0 0 0 3>;
+			status = "disabled";
 		};
 
 		port03: pci@3,0 {
@@ -357,5 +369,6 @@
 					<0 0 0 2 &port03 0 0 0 1>,
 					<0 0 0 3 &port03 0 0 0 2>,
 					<0 0 0 4 &port03 0 0 0 3>;
+			status = "disabled";
 		};
 	};
diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
index 34906d522f0a..2e471dfe43cf 100644
--- a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
@@ -9,6 +9,8 @@
  * Copyright The Asahi Linux Contributors
  */
 
+#include <dt-bindings/leds/common.h>
+
 / {
 	aliases {
 		serial0 = &serial0;
@@ -34,6 +36,18 @@
 		device_type = "memory";
 		reg = <0x100 0 0x2 0>; /* To be filled by loader */
 	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm0 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
 };
 
 &serial0 {
@@ -102,13 +116,6 @@
 	};
 };
 
-&pcie0_dart_2 {
-	status = "disabled";
-};
-
-&pcie0_dart_3 {
-	status = "disabled";
+&fpwm0 {
+	status = "okay";
 };
-
-/delete-node/ &port02;
-/delete-node/ &port03;
diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
index 00d3a9447c89..1e5a19e49b08 100644
--- a/arch/arm64/boot/dts/apple/t600x-j375.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
@@ -104,6 +104,7 @@
 &port02 {
 	/* 10 Gbit Ethernet */
 	bus-range = <3 3>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
 		reg = <0x30000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
@@ -114,4 +115,14 @@
 &port03 {
 	/* USB xHCI */
 	bus-range = <4 4>;
+	status = "okay";
+};
+
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
+&pcie0_dart_3 {
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts
index b52ddc409893..1c3e37f86d46 100644
--- a/arch/arm64/boot/dts/apple/t8103-j274.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j274.dts
@@ -37,10 +37,12 @@
 
 &port01 {
 	bus-range = <2 2>;
+	status = "okay";
 };
 
 &port02 {
 	bus-range = <3 3>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
 		reg = <0x30000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
@@ -48,6 +50,14 @@
 	};
 };
 
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
 &i2c2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
index 151074109a11..56b0c67bfcda 100644
--- a/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -11,10 +11,23 @@
 
 #include "t8103.dtsi"
 #include "t8103-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
 
 / {
 	compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
 	model = "Apple MacBook Pro (13-inch, M1, 2020)";
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
 };
 
 &bluetooth0 {
@@ -25,21 +38,6 @@
 	brcm,board-type = "apple,honshu";
 };
 
-/*
- * Remove unused PCIe ports and disable the associated DARTs.
- */
-
-&pcie0_dart_1 {
-	status = "disabled";
-};
-
-&pcie0_dart_2 {
-	status = "disabled";
-};
-
-/delete-node/ &port01;
-/delete-node/ &port02;
-
 &i2c2 {
 	status = "okay";
 };
@@ -47,3 +45,7 @@
 &i2c4 {
 	status = "okay";
 };
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j313.dts b/arch/arm64/boot/dts/apple/t8103-j313.dts
index bc1f865aa790..97a4344d8dca 100644
--- a/arch/arm64/boot/dts/apple/t8103-j313.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j313.dts
@@ -11,10 +11,23 @@
 
 #include "t8103.dtsi"
 #include "t8103-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
 
 / {
 	compatible = "apple,j313", "apple,t8103", "apple,arm-platform";
 	model = "Apple MacBook Air (M1, 2020)";
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
 };
 
 &bluetooth0 {
@@ -25,17 +38,6 @@
 	brcm,board-type = "apple,shikoku";
 };
 
-/*
- * Remove unused PCIe ports and disable the associated DARTs.
- */
-
-&pcie0_dart_1 {
-	status = "disabled";
+&fpwm1 {
+	status = "okay";
 };
-
-&pcie0_dart_2 {
-	status = "disabled";
-};
-
-/delete-node/ &port01;
-/delete-node/ &port02;
diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts
index 2db425ceb30f..58c8e43789b4 100644
--- a/arch/arm64/boot/dts/apple/t8103-j456.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -55,13 +55,23 @@
 
 &port01 {
 	bus-range = <2 2>;
+	status = "okay";
 };
 
 &port02 {
 	bus-range = <3 3>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
 		reg = <0x30000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 00];
 	};
 };
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
index 3821ff146c56..152f95fd49a2 100644
--- a/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -37,6 +37,7 @@
 
 &port02 {
 	bus-range = <3 3>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
 		reg = <0x30000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
@@ -44,12 +45,6 @@
 	};
 };
 
-/*
- * Remove unused PCIe port and disable the associated DART.
- */
-
-&pcie0_dart_1 {
-	status = "disabled";
+&pcie0_dart_2 {
+	status = "okay";
 };
-
-/delete-node/ &port01;
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 9859219699f4..9b0dad6b6184 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -432,6 +432,15 @@
 			status = "disabled"; /* only used in J293 */
 		};
 
+		fpwm1: pwm@235044000 {
+			compatible = "apple,t8103-fpwm", "apple,s5l-fpwm";
+			reg = <0x2 0x35044000 0x0 0x4000>;
+			power-domains = <&ps_fpwm1>;
+			clocks = <&clkref>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		serial0: serial@235200000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x35200000 0x0 0x1000>;
@@ -724,6 +733,7 @@
 			interrupt-parent = <&aic>;
 			interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
 		};
 
 		pcie0_dart_2: iommu@683008000 {
@@ -733,6 +743,7 @@
 			interrupt-parent = <&aic>;
 			interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
 		};
 
 		pcie0: pcie@690000000 {
@@ -807,6 +818,7 @@
 						<0 0 0 2 &port01 0 0 0 1>,
 						<0 0 0 3 &port01 0 0 0 2>,
 						<0 0 0 4 &port01 0 0 0 3>;
+				status = "disabled";
 			};
 
 			port02: pci@2,0 {
@@ -826,6 +838,7 @@
 						<0 0 0 2 &port02 0 0 0 1>,
 						<0 0 0 3 &port02 0 0 0 2>,
 						<0 0 0 4 &port02 0 0 0 3>;
+				status = "disabled";
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/apple/t8112-j413.dts b/arch/arm64/boot/dts/apple/t8112-j413.dts
new file mode 100644
index 000000000000..6f69658623bf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j413.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (M2, 2022)
+ *
+ * target-type: J413
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j413", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Air (13-inch, M2, 2022)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,hokkaido";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,hokkaido";
+	};
+};
+
+&i2c0 {
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j473.dts b/arch/arm64/boot/dts/apple/t8112-j473.dts
new file mode 100644
index 000000000000..06fe257f08be
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j473.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple Mac mini (M2, 2023)
+ *
+ * target-type: J473
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j473", "apple,t8112", "apple,arm-platform";
+	model = "Apple Mac mini (M2, 2023)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+};
+
+&port01 {
+	bus-range = <2 2>;
+	status = "okay";
+};
+
+&port02 {
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&pcie1_dart {
+	status = "okay";
+};
+
+&pcie2_dart {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts
new file mode 100644
index 000000000000..0ad908349f55
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j493.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Pro (13-inch, M1, 2022)
+ *
+ * target-type: J493
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j493", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Pro (13-inch, M2, 2022)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4425";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 00 00 00 00 00];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,kyushu";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f69";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,kyushu";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
new file mode 100644
index 000000000000..f5edf61113e7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple M2 MacBook Air/Pro (M2, 2022)
+ *
+ * This file contains parts common to all Apple M2 devices using the t8112.
+ *
+ * target-type: J493, J413
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&nco_clkref {
+	clock-frequency = <900000000>;
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi
new file mode 100644
index 000000000000..7c050c6f2707
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi
@@ -0,0 +1,1140 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8112 "M2" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+&pmgr {
+	ps_sbr: power-controller@100 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@108 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@110 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+		apple,always-on; /* Core device */
+	};
+
+	ps_soc_spmi0: power-controller@118 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi0";
+	};
+
+	ps_gpio: power-controller@120 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms_busif: power-controller@128 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_busif";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms: power-controller@130 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms_c1ppt: power-controller@160 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_c1ppt";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_soc_dpe: power-controller@168 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_dpe";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pmgr_soc_ocla: power-controller@170 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmgr_soc_ocla";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_ispsens0: power-controller@178 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@180 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_ispsens2: power-controller@188 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens2";
+	};
+
+	ps_ispsens3: power-controller@190 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens3";
+	};
+
+	ps_pcie_ref: power-controller@198 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_aft0: power-controller@1a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aft0";
+	};
+
+	ps_imx: power-controller@1a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "imx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sio_busif: power-controller@1b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio: power-controller@1b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		apple,always-on;
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sio_cpu: power-controller@1c0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_cpu";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm0: power-controller@1c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm1: power-controller@1d0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm2: power-controller@1d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c0: power-controller@1e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c1: power-controller@1e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c2: power-controller@1f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c3: power-controller@1f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c4: power-controller@200 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c4";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi_p: power-controller@208 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_uart_p: power-controller@210 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_audio_p: power-controller@218 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "audio_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_aes: power-controller@220 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi0: power-controller@228 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi1: power-controller@230 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi2: power-controller@238 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi3: power-controller@240 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi4: power-controller@248 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi4";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi5: power-controller@250 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi5";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_uart_n: power-controller@258 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_n";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart0: power-controller@260 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart1: power-controller@268 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart2: power-controller@270 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart3: power-controller@278 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart4: power-controller@280 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart5: power-controller@288 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart6: power-controller@290 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart7: power-controller@298 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart8: power-controller@2a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_sio_adma: power-controller@2a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_adma";
+		power-domains = <&ps_spi_p>, <&ps_audio_p>;
+	};
+
+	ps_dpa0: power-controller@2b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_dpa1: power-controller@2b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_mca0: power-controller@2c0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca1: power-controller@2c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca2: power-controller@2d0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca3: power-controller@2d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca4: power-controller@2e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca5: power-controller@2e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mcc: power-controller@2f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory controller */
+	};
+
+	ps_dcs0: power-controller@2f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@300 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@308 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@310 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@318 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs5: power-controller@320 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs6: power-controller@328 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs7: power-controller@330 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_smx0: power-controller@338 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx0";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_smx1: power-controller@340 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx1";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_apcie: power-controller@348 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie";
+		power-domains = <&ps_imx>, <&ps_pcie_ref>;
+	};
+
+	ps_rmx0: power-controller@350 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx0";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_rmx1: power-controller@358 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx1";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_cmx: power-controller@360 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cmx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mmx: power-controller@368 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mmx";
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	ps_disp0_sys: power-controller@370 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_sys";
+		power-domains = <&ps_rmx1>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_disp0_fe: power-controller@378 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_disp0_sys>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_dispext_sys: power-controller@380 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_sys";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_dispext_fe: power-controller@388 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_fe";
+		power-domains = <&ps_dispext_sys>;
+	};
+
+	ps_dispext_cpu0: power-controller@3c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_cpu0";
+		power-domains = <&ps_dispext_fe>;
+		apple,min-state = <4>;
+	};
+
+	ps_dptx_ext_phy: power-controller@3d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dptx_ext_phy";
+	};
+
+	ps_dispdfr_fe: power-controller@3e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_fe";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_dispdfr_be: power-controller@3e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_be";
+		power-domains = <&ps_dispdfr_fe>;
+	};
+
+	ps_mipi_dsi: power-controller@3f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_dispdfr_be>;
+	};
+
+	ps_jpg: power-controller@3f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_cmx>;
+	};
+
+	ps_apcie_gp: power-controller@400 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_gp";
+		power-domains = <&ps_apcie>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	ps_msr: power-controller@408 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_pmp: power-controller@410 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+		apple,always-on;
+	};
+
+	ps_pms_sram: power-controller@418 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+		apple,always-on;
+	};
+
+	ps_msr_ase_core: power-controller@420 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr_ase_core";
+		power-domains = <&ps_msr>;
+	};
+
+	ps_ans: power-controller@428 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_gfx: power-controller@430 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x430 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_isp_sys: power-controller@438 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x438 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rmx1>;
+	};
+
+	ps_venc_sys: power-controller@440 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x440 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_rmx1>;
+	};
+
+	ps_avd_sys: power-controller@448 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x448 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "avd_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_apcie_st: power-controller@450 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x450 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_st";
+		power-domains = <&ps_apcie>, <&ps_ans>;
+	};
+
+	ps_atc0_common: power-controller@458 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x458 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_common";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_atc0_pcie: power-controller@460 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x460 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_pcie";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio: power-controller@468 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x468 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio_pcie: power-controller@470 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x470 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_pcie";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc0_cio_usb: power-controller@478 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x478 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_usb";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc1_common: power-controller@480 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x480 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_common";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_atc1_pcie: power-controller@488 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x488 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_pcie";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio: power-controller@490 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x490 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio_pcie: power-controller@498 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x498 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_pcie";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_atc1_cio_usb: power-controller@4a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_usb";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_ane_sys: power-controller@4a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ane_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_scodec: power-controller@4b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "scodec";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_sep: power-controller@c00 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on;
+	};
+
+	ps_venc_dma: power-controller@8000 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_dma";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@8008 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_pipe5: power-controller@8010 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_me0: power-controller@8018 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>;
+	};
+
+	ps_venc_me1: power-controller@8020 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>;
+	};
+
+	ps_disp0_cpu0: power-controller@10000 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x10000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_cpu0";
+		power-domains = <&ps_disp0_fe>;
+		apple,min-state = <4>;
+	};
+};
+
+&pmgr_mini {
+
+	ps_debug_gated: power-controller@58 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_gated";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi0: power-controller@60 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi0";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi1: power-controller@68 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi1";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_aon: power-controller@70 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_msg: power-controller@78 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msg";
+	};
+
+	ps_nub_gpio: power-controller@80 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_gpio";
+		apple,always-on;
+	};
+
+	ps_atc0_usb_aon: power-controller@88 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb_aon";
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	ps_atc1_usb_aon: power-controller@90 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb_aon";
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	ps_atc0_usb: power-controller@98 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb";
+		power-domains = <&ps_atc0_usb_aon>, <&ps_atc0_common>;
+	};
+
+	ps_atc1_usb: power-controller@a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb";
+		power-domains = <&ps_atc1_usb_aon>, <&ps_atc1_common>;
+	};
+
+	ps_nub_fabric: power-controller@a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_sram: power-controller@b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_sram";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_debug_switch: power-controller@b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_switch";
+		apple,always-on; /* Core AON device */
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi
new file mode 100644
index 000000000000..1666e6ab250b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112.dtsi
@@ -0,0 +1,921 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8112 "M2" SoC
+ *
+ * Other names: H14G
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	compatible = "apple,t8112", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+				core2 {
+					cpu = <&cpu_p2>;
+				};
+				core3 {
+					cpu = <&cpu_p3>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e1: cpu@1 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e2: cpu@2 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e3: cpu@3 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_p0: cpu@10100 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p1: cpu@10101 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p2: cpu@10102 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p3: cpu@10103 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	};
+
+	ecluster_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <2>;
+			clock-latency-ns = <20000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <4>;
+			clock-latency-ns = <30000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2004000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2256000000>;
+			opp-level = <6>;
+			clock-latency-ns = <39000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2424000000>;
+			opp-level = <7>;
+			clock-latency-ns = <53000>;
+		};
+	};
+
+	pcluster_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <660000000>;
+			opp-level = <1>;
+			clock-latency-ns = <9000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <924000000>;
+			opp-level = <2>;
+			clock-latency-ns = <19000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1188000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1452000000>;
+			opp-level = <4>;
+			clock-latency-ns = <24000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <5>;
+			clock-latency-ns = <26000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1968000000>;
+			opp-level = <6>;
+			clock-latency-ns = <28000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <7>;
+			clock-latency-ns = <30000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <8>;
+			clock-latency-ns = <33000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2568000000>;
+			opp-level = <9>;
+			clock-latency-ns = <34000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2724000000>;
+			opp-level = <10>;
+			clock-latency-ns = <36000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2868000000>;
+			opp-level = <11>;
+			clock-latency-ns = <41000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <2988000000>;
+			opp-level = <12>;
+			clock-latency-ns = <42000>;
+		};
+		opp13 {
+			opp-hz = /bits/ 64 <3096000000>;
+			opp-level = <13>;
+			clock-latency-ns = <44000>;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3204000000>;
+			opp-level = <14>;
+			clock-latency-ns = <46000>;
+		};
+		/* Not available until CPU deep sleep is implemented */
+#if 0
+		opp15 {
+			opp-hz = /bits/ 64 <3324000000>;
+			opp-level = <15>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+		opp16 {
+			opp-hz = /bits/ 64 <3408000000>;
+			opp-level = <16>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+		opp17 {
+			opp-hz = /bits/ 64 <3504000000>;
+			opp-level = <17>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-e {
+		compatible = "apple,blizzard-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,avalanche-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		cpufreq_e: cpufreq@210e20000 {
+			compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x10e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: cpufreq@211e20000 {
+			compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x11e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		sio_dart: iommu@235004000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x2 0x35004000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 769 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_sio_cpu>;
+		};
+
+		i2c0: i2c@235010000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35010000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 761 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@235014000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35014000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 762 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@235018000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35018000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 763 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@23501c000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x3501c000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 764 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c3>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@235020000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35020000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 765 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c4>;
+			status = "disabled";
+		};
+
+		fpwm1: pwm@235044000 {
+			compatible = "apple,t8112-fpwm", "apple,s5l-fpwm";
+			reg = <0x2 0x35044000 0x0 0x4000>;
+			power-domains = <&ps_fpwm1>;
+			clocks = <&clkref>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		serial0: serial@235200000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35200000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 739 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * TODO: figure out the clocking properly, there may
+			 * be a third selectable clock.
+			 */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		serial2: serial@235208000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35208000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 741 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart2>;
+			status = "disabled";
+		};
+
+		admac: dma-controller@238200000 {
+			compatible = "apple,t8112-admac", "apple,admac";
+			reg = <0x2 0x38200000 0x0 0x34000>;
+			dma-channels = <24>;
+			interrupts-extended = <0>,
+					      <&aic AIC_IRQ 760 IRQ_TYPE_LEVEL_HIGH>,
+					      <0>,
+					      <0>;
+			#dma-cells = <1>;
+			iommus = <&sio_dart 2>;
+			power-domains = <&ps_sio_adma>;
+			resets = <&ps_audio_p>;
+		};
+
+		mca: i2s@238400000 {
+			compatible = "apple,t8112-mca", "apple,mca";
+			reg = <0x2 0x38400000 0x0 0x18000>,
+			      <0x2 0x38300000 0x0 0x30000>;
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 753 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 754 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 755 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 756 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 757 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 758 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&ps_audio_p>;
+			clocks = <&nco 0>, <&nco 1>, <&nco 2>,
+				 <&nco 3>, <&nco 4>, <&nco 4>;
+			power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+					<&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>;
+			dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+			       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+			       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+			       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>,
+			       <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>,
+			       <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>;
+			dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+				    "tx1a", "rx1a", "tx1b", "rx1b",
+				    "tx2a", "rx2a", "tx2b", "rx2b",
+				    "tx3a", "rx3a", "tx3b", "rx3b",
+				    "tx4a", "rx4a", "tx4b", "rx4b",
+				    "tx5a", "rx5a", "tx5b", "rx5b";
+
+			#sound-dai-cells = <1>;
+		};
+
+		nco: clock-controller@23b044000 {
+			compatible = "apple,t8112-nco", "apple,nco";
+			reg = <0x2 0x3b044000 0x0 0x14000>;
+			clocks = <&nco_clkref>;
+			#clock-cells = <1>;
+		};
+
+		aic: interrupt-controller@23b0c0000 {
+			compatible = "apple,t8112-aic", "apple,aic2";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x2 0x3b0c0000 0x0 0x8000>,
+				<0x2 0x3b0c8000 0x0 0x4>;
+			reg-names = "core", "event";
+			power-domains = <&ps_aic>;
+
+			affinities {
+				e-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_E>;
+					cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
+				};
+
+				p-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_P>;
+					cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
+				};
+			};
+		};
+
+		pmgr: power-management@23b700000 {
+			compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3b700000 0 0x14000>;
+			/* child nodes are added in t8103-pmgr.dtsi */
+		};
+
+		pinctrl_ap: pinctrl@23c100000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3c100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 213>;
+			apple,npins = <213>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 205 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(111, 1)>,
+					 <APPLE_PINMUX(110, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(113, 1)>,
+					 <APPLE_PINMUX(112, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(87, 1)>,
+					 <APPLE_PINMUX(86, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(54, 1)>,
+					 <APPLE_PINMUX(53, 1)>;
+			};
+
+			i2c4_pins: i2c4-pins {
+				pinmux = <APPLE_PINMUX(131, 1)>,
+					 <APPLE_PINMUX(130, 1)>;
+			};
+
+			spi3_pins: spi3-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					<APPLE_PINMUX(47, 1)>,
+					<APPLE_PINMUX(48, 1)>,
+					<APPLE_PINMUX(49, 1)>;
+			};
+
+			pcie_pins: pcie-pins {
+				pinmux = <APPLE_PINMUX(162, 1)>,
+					 <APPLE_PINMUX(163, 1)>,
+					 <APPLE_PINMUX(164, 1)>;
+				// TODO: 1 more CLKREQs
+			};
+		};
+
+		pinctrl_nub: pinctrl@23d1f0000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3d1f0000 0x0 0x4000>;
+			power-domains = <&ps_nub_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 24>;
+			apple,npins = <24>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 371 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 372 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 373 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 377 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@23d280000 {
+			compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3d280000 0 0x4000>;
+			/* child nodes are added in t8103-pmgr.dtsi */
+		};
+
+		wdt: watchdog@23d2b0000 {
+			compatible = "apple,t8112-wdt", "apple,wdt";
+			reg = <0x2 0x3d2b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 379 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@23e820000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3e820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 18>;
+			apple,npins = <18>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 490 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 491 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 492 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 493 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 494 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 495 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 496 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aop: pinctrl@24a820000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x4a820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 54>;
+			apple,npins = <54>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ans_mbox: mbox@277408000 {
+			compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x77408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 717 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 718 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 719 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 720 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans>;
+		};
+
+		sart: sart@27bc50000 {
+			compatible = "apple,t8112-sart", "apple,t6000-sart";
+			reg = <0x2 0x7bc50000 0x0 0x10000>;
+			power-domains = <&ps_ans>;
+		};
+
+		nvme@27bcc0000 {
+			compatible = "apple,t8112-nvme-ans2", "apple,nvme-ans2";
+			reg = <0x2 0x7bcc0000 0x0 0x40000>,
+				<0x2 0x77400000 0x0 0x4000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 724 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans>, <&ps_apcie_st>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans>;
+		};
+
+		pcie0_dart: iommu@681008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x81008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 782 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+		};
+
+		pcie1_dart: iommu@682008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x82008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 785 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie2_dart: iommu@683008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x83008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 788 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie3_dart: iommu@684008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x84008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 791 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@690000000 {
+			compatible = "apple,t8112-pcie", "apple,pcie";
+			device_type = "pci";
+
+			reg = <0x6 0x90000000 0x0 0x1000000>,
+			      <0x6 0x80000000 0x0 0x100000>,
+			      <0x6 0x81000000 0x0 0x4000>,
+			      <0x6 0x82000000 0x0 0x4000>,
+			      <0x6 0x83000000 0x0 0x4000>,
+			      <0x6 0x84000000 0x0 0x4000>;
+			reg-names = "config", "rc", "port0", "port1", "port2", "port3";
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 787 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 790 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller;
+			msi-parent = <&pcie0>;
+			msi-ranges = <&aic AIC_IRQ 793 IRQ_TYPE_EDGE_RISING 32>;
+
+			iommu-map = <0x100 &pcie0_dart 0 1>,
+				    <0x200 &pcie1_dart 1 1>,
+				    <0x300 &pcie2_dart 2 1>,
+				    <0x400 &pcie3_dart 3 1>;
+			iommu-map-mask = <0xff00>;
+
+			bus-range = <0 4>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+				 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+			power-domains = <&ps_apcie_gp>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+
+			port00: pci@0,0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 166 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+						<0 0 0 2 &port00 0 0 0 1>,
+						<0 0 0 3 &port00 0 0 0 2>,
+						<0 0 0 4 &port00 0 0 0 3>;
+			};
+
+			port01: pci@1,0 {
+				device_type = "pci";
+				reg = <0x800 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 167 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+						<0 0 0 2 &port01 0 0 0 1>,
+						<0 0 0 3 &port01 0 0 0 2>,
+						<0 0 0 4 &port01 0 0 0 3>;
+
+				status = "disabled";
+			};
+
+			port02: pci@2,0 {
+				device_type = "pci";
+				reg = <0x1000 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 168 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+						<0 0 0 2 &port02 0 0 0 1>,
+						<0 0 0 3 &port02 0 0 0 2>,
+						<0 0 0 4 &port02 0 0 0 3>;
+
+				status = "disabled";
+			};
+
+			/* TODO: GPIO unknown */
+			port03: pci@3,0 {
+				device_type = "pci";
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				//reset-gpios = <&pinctrl_ap 33 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+						<0 0 0 2 &port03 0 0 0 1>,
+						<0 0 0 3 &port03 0 0 0 2>,
+						<0 0 0 4 &port03 0 0 0 3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "t8112-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
index d8b60575eb4f..78204d71ecd2 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
@@ -58,12 +58,16 @@
 			function = "usb2";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
 		};
 
 		led-usb3 {
 			function = "usb3";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
+			linux,default-trigger = "usbport";
 		};
 
 		led-wifi {
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
index 296393d4aaab..fcf092c81b59 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
@@ -64,12 +64,16 @@
 			function = "usb2";
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
 		};
 
 		led-usb3 {
-			function = "usbd3";
+			function = "usb3";
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
+			linux,default-trigger = "usbport";
 		};
 
 		led-brightness {
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
index 839ca33178b0..d94a53d68320 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
@@ -120,7 +120,7 @@
 };
 
 &leds {
-	led-power@11 {
+	led@11 {
 		reg = <0x11>;
 		function = LED_FUNCTION_POWER;
 		color = <LED_COLOR_ID_WHITE>;
@@ -130,7 +130,7 @@
 		pinctrl-0 = <&pins_led_17_a>;
 	};
 
-	led-wan-red@12 {
+	led@12 {
 		reg = <0x12>;
 		function = LED_FUNCTION_WAN;
 		color = <LED_COLOR_ID_RED>;
@@ -139,7 +139,7 @@
 		pinctrl-0 = <&pins_led_18_a>;
 	};
 
-	led-wps@14 {
+	led@14 {
 		reg = <0x14>;
 		function = LED_FUNCTION_WPS;
 		color = <LED_COLOR_ID_WHITE>;
@@ -148,7 +148,7 @@
 		pinctrl-0 = <&pins_led_20_a>;
 	};
 
-	led-wan-white@15 {
+	led@15 {
 		reg = <0x15>;
 		function = LED_FUNCTION_WAN;
 		color = <LED_COLOR_ID_WHITE>;
@@ -157,7 +157,7 @@
 		pinctrl-0 = <&pins_led_21_a>;
 	};
 
-	led-lan@19 {
+	led@19 {
 		reg = <0x19>;
 		function = LED_FUNCTION_LAN;
 		color = <LED_COLOR_ID_WHITE>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index eb2a78f4e033..457805efb385 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -107,6 +107,12 @@
 			clock-frequency = <50000000>;
 			clock-output-names = "periph";
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	soc {
@@ -142,6 +148,19 @@
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb_phy PHY_TYPE_USB2>;
 			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ehci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			ehci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
 		};
 
 		ohci: usb@c400 {
@@ -150,6 +169,19 @@
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb_phy PHY_TYPE_USB2>;
 			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ohci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			ohci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
 		};
 
 		xhci: usb@d000 {
@@ -158,6 +190,19 @@
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb_phy PHY_TYPE_USB3>;
 			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xhci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			xhci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
 		};
 
 		bus@80000 {
@@ -254,7 +299,7 @@
 			};
 		};
 
-		procmon: syscon@280000 {
+		procmon: bus@280000 {
 			compatible = "simple-bus";
 			reg = <0x280000 0x1000>;
 			ranges;
@@ -531,6 +576,18 @@
 			#size-cells = <0>;
 		};
 
+		hsspi: spi@1000{
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		nand-controller@1800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -538,7 +595,7 @@
 			reg = <0x1800 0x600>, <0x2000 0x10>;
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
+			interrupt-names = "nand_ctlrdy";
 			status = "okay";
 
 			nandcs: nand@0 {
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
index d5bc31980f03..46aa8c0b7971 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -79,6 +79,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -86,6 +87,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -117,6 +124,19 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
index 6f805266d3c9..7020f2e995e2 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
@@ -60,6 +60,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -67,6 +68,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -99,6 +106,18 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
index b982249b80a2..6a0242cbea57 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -79,6 +79,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -86,6 +87,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -117,6 +124,18 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
index a996d436e977..1a12905266ef 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
@@ -79,6 +79,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -86,6 +87,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -117,6 +124,19 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
index 62c530d4b103..f41ebc30666f 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -60,6 +60,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -100,5 +106,17 @@
 			clock-names = "refclk";
 			status = "disabled";
 		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
index 34c7b513d363..fa2688f41f06 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -78,6 +78,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -137,5 +143,17 @@
 			clock-names = "refclk";
 			status = "disabled";
 		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
index fcbd3c430ace..c4e6e71f6310 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
index a3623e6f6919..e69cd683211a 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
index e39f1e6d4774..db2c82d6dfd8 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
index eba07e0b1ca6..25c12bc63545 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
index af17091ae764..faba21f03120 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
index 032aeb75c983..9808331eede2 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
index 0cbf582f5d54..1f561c8e13b0 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
@@ -28,3 +28,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index a9186166c068..388424b3e1d3 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -178,7 +178,7 @@
 			      <0x02e00000 0x600000>; /* GICR */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-			gic_its: gic-its@63c20000 {
+			gic_its: msi-controller@63c20000 {
 				compatible = "arm,gic-v3-its";
 				msi-controller;
 				#msi-cells = <1>;
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index e0a71795261b..8ad31dee11a3 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -389,9 +389,10 @@
 			      <0x8010 0x80000000 0x0 0x600000>; /* GICR */
 			interrupts = <1 9 0xf04>;
 
-			its: gic-its@8010,00020000 {
+			its: msi-controller@801000020000 {
 				compatible = "arm,gic-v3-its";
 				msi-controller;
+				#msi-cells = <1>;
 				reg = <0x8010 0x20000 0x0 0x200000>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
index dfb41705a9a9..3419bd252696 100644
--- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
@@ -55,7 +55,7 @@
 		method = "smc";
 	};
 
-	gic: interrupt-controller@400080000 {
+	gic: interrupt-controller@4000080000 {
 		compatible = "arm,gic-v3";
 		#interrupt-cells = <3>;
 		#address-cells = <2>;
@@ -67,7 +67,7 @@
 		      <0x04 0x01000000 0x0 0x1000000>;	/* GICR */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		gicits: gic-its@40010000 {
+		gicits: msi-controller@4000100000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x04 0x00100000 0x0 0x20000>;	/* GIC ITS */
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index f54f30633417..e4ed788413fe 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -21,6 +21,8 @@
 		gsc0 = &gsc_0;
 		gsc1 = &gsc_1;
 		gsc2 = &gsc_2;
+		mmc0 = &mshc_0;
+		mmc2 = &mshc_2;
 		pinctrl0 = &pinctrl_alive;
 		pinctrl1 = &pinctrl_aud;
 		pinctrl2 = &pinctrl_cpif;
@@ -40,8 +42,6 @@
 		spi2 = &spi_2;
 		spi3 = &spi_3;
 		spi4 = &spi_4;
-		mshc0 = &mshc_0;
-		mshc2 = &mshc_2;
 	};
 
 	chosen {
@@ -952,6 +952,7 @@
 
 &mshc_0 {
 	status = "okay";
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 5519a80576c5..91ae0462a706 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -911,12 +911,20 @@
 		};
 
 		pmu_system_controller: system-controller@105c0000 {
-			compatible = "samsung,exynos5433-pmu", "syscon";
+			compatible = "samsung,exynos5433-pmu", "simple-mfd", "syscon";
 			reg = <0x105c0000 0x5008>;
 			#clock-cells = <1>;
 			clock-names = "clkout16";
 			clocks = <&xxti>;
 
+			mipi_phy: mipi-phy {
+				compatible = "samsung,exynos5433-mipi-video-phy";
+				#phy-cells = <1>;
+				samsung,cam0-sysreg = <&syscon_cam0>;
+				samsung,cam1-sysreg = <&syscon_cam1>;
+				samsung,disp-sysreg = <&syscon_disp>;
+			};
+
 			reboot: syscon-reboot {
 				compatible = "syscon-reboot";
 				regmap = <&pmu_system_controller>;
@@ -936,15 +944,6 @@
 			interrupts = <GIC_PPI 9 0xf04>;
 		};
 
-		mipi_phy: video-phy {
-			compatible = "samsung,exynos5433-mipi-video-phy";
-			#phy-cells = <1>;
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			samsung,cam0-sysreg = <&syscon_cam0>;
-			samsung,cam1-sysreg = <&syscon_cam1>;
-			samsung,disp-sysreg = <&syscon_disp>;
-		};
-
 		decon: decon@13800000 {
 			compatible = "samsung,exynos5433-decon";
 			reg = <0x13800000 0x2104>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index f3f4a6ab4b49..1f2eddcebdd9 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -17,9 +17,9 @@
 	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
 
 	aliases {
+		mmc0 = &mmc_0;
+		mmc2 = &mmc_2;
 		serial0 = &serial_2;
-		mshc0 = &mmc_0;
-		mshc2 = &mmc_2;
 	};
 
 	chosen {
@@ -362,6 +362,7 @@
 &mmc_0 {
 	status = "okay";
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	non-removable;
 	card-detect-delay = <200>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
index 5db9a81ac7bb..47a389d9ff7d 100644
--- a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
@@ -18,6 +18,7 @@
 	chassis-type = "handset";
 
 	aliases {
+		mmc0 = &mmc_0;
 		serial0 = &serial_0;
 		serial1 = &serial_1;
 		serial2 = &serial_2;
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index a38fe5129937..d67e98120313 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -245,6 +245,15 @@
 				      "dout_peri_uart", "dout_peri_ip";
 		};
 
+		cmu_g3d: clock-controller@11400000 {
+			compatible = "samsung,exynos850-cmu-g3d";
+			reg = <0x11400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_G3D_SWITCH>;
+			clock-names = "oscclk", "dout_g3d_switch";
+		};
+
 		cmu_apm: clock-controller@11800000 {
 			compatible = "samsung,exynos850-cmu-apm";
 			reg = <0x11800000 0x8000>;
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 198fff3731ae..ef7d17aef58f 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -89,8 +89,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
@@ -122,9 +124,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index af9194eca556..73eb6061c73e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -56,14 +56,10 @@
 };
 
 &enetc_port2 {
-	nvmem-cells = <&base_mac_address 2>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
 &enetc_port3 {
-	nvmem-cells = <&base_mac_address 3>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -84,8 +80,6 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy0>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 4>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -94,8 +88,6 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy1>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 5>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -104,8 +96,6 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy2>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 6>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -114,8 +104,6 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy3>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 7>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 1f34c7553459..7cd29ab970d9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,7 +55,5 @@
 &enetc_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index aac41192caa1..113b1df74bf8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -36,14 +36,10 @@
 };
 
 &enetc_port2 {
-	nvmem-cells = <&base_mac_address 2>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
 &enetc_port3 {
-	nvmem-cells = <&base_mac_address 3>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -56,8 +52,6 @@
 	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -66,8 +60,6 @@
 	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
-	nvmem-cells = <&base_mac_address 1>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index a4421db3784e..9b5e92fb753e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,7 +43,5 @@
 &enetc_port1 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	nvmem-cells = <&base_mac_address 1>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 8b65af4a7147..4ab17b984b03 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -92,8 +92,6 @@
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	managed = "in-band-status";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -156,21 +154,6 @@
 				label = "bootloader environment";
 			};
 		};
-
-		otp-1 {
-			compatible = "user-otp";
-
-			nvmem-layout {
-				compatible = "kontron,sl28-vpd";
-
-				serial_number: serial-number {
-				};
-
-				base_mac_address: base-mac-address {
-					#nvmem-cell-cells = <1>;
-				};
-			};
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 9e50976bcb8e..678bb0358751 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -131,7 +131,7 @@
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
 					 IRQ_TYPE_LEVEL_LOW)>;
-		its: gic-its@6020000 {
+		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index e5fb137ac02b..8f6090a9aef2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -123,7 +123,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		its: gic-its@6020000 {
+		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x0 0x6020000 0 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 348d9e3a9125..d2f5345d0560 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -60,7 +60,7 @@
 		interrupt-controller;
 		interrupts = <1 9 0x4>;
 
-		its: gic-its@6020000 {
+		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x0 0x6020000 0 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 50c19e8405d5..ea6a94b57aeb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -395,7 +395,7 @@
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		its: gic-its@6020000 {
+		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x0 0x6020000 0 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
new file mode 100644
index 000000000000..685d4294f4f1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC USBH2(ABCD) / USBH(3|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/* TODO: Audio Mixer */
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Apalis Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH4 SuperSpeed */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
new file mode 100644
index 000000000000..c6d51f116298
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		/* LED_4_GREEN / MXM3_188 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_4_RED / MXM3_178 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_GREEN / MXM3_152 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_RED / MXM3_156 */
+		led-4 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC_USBH(2|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/* TODO: Audio Mixer */
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>,
+		    <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>,
+		    <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>,
+		    <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>,
+		    <&pinctrl_qspi1a_gpios>, <&pinctrl_sata1_act>,
+		    <&pinctrl_sim0_gpios>, <&pinctrl_uart24_forceoff>,
+		    <&pinctrl_usdhc1_gpios>;
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27	0x06000061>, /* LED_4_GREEN */
+			   <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29	0x06000061>, /* LED_4_RED */
+			   <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x06000061>, /* LED_5_GREEN */
+			   <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x06000061>; /* LED_5_RED */
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25		0x00000021>;
+	};
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03",
+			  "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07",
+			  "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11",
+			  "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15",
+			  "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19",
+			  "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23",
+			  "gpio5-24", "UART24-FORCEOFF", "gpio5-26",
+			  "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30",
+			  "gpio5-31";
+	ngpios = <32>;
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Apalis Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH4 SuperSpeed */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
new file mode 100644
index 000000000000..40067ab8aa74
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		/* LED_4_GREEN / MXM3_188 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_4_RED / MXM3_178 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_GREEN / MXM3_152 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_RED / MXM3_156 */
+		led-4 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		/* MMC1_PWR_CTRL */
+		gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+	};
+
+	reg_can1_supply: regulator-can1-supply {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "can1_supply";
+	};
+
+	reg_can2_supply: regulator-can2-supply {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sata1_act>;
+		gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "can2_supply";
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC_USBH(2|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/* TODO: Audio Mixer */
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	xceiver-supply = <&reg_can1_supply>;
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	xceiver-supply = <&reg_can2_supply>;
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>,
+		    <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>,
+		    <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>,
+		    <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>,
+		    <&pinctrl_qspi1a_gpios>, <&pinctrl_sim0_gpios>,
+		    <&pinctrl_uart24_forceoff>, <&pinctrl_usdhc1_gpios>;
+
+	/* PMIC MMC1 power-switch */
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19	0x00000021>; /* MXM3_148, PMIC */
+	};
+
+	/* FlexCAN PMIC */
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021>; /* MXM3_158, PMIC */
+	};
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27	0x06000061>, /* LED_4_GREEN */
+			   <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29	0x06000061>, /* LED_4_RED */
+			   <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x06000061>, /* LED_5_GREEN */
+			   <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x06000061>; /* LED_5_RED */
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25		0x00000021>;
+	};
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03",
+			  "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07",
+			  "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11",
+			  "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15",
+			  "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19",
+			  "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23",
+			  "gpio5-24", "UART24-FORCEOFF", "gpio5-26",
+			  "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30",
+			  "gpio5-31";
+	ngpios = <32>;
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Apalis Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH4 SuperSpeed */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	cap-power-off-card;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
new file mode 100644
index 000000000000..bd5d771637ca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -0,0 +1,1484 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/* Apalis BKL1 */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bkl_on>;
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */
+		/* TODO: hook-up to Apalis BKL1_PWM */
+		status = "disabled";
+	};
+
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio8>;
+		gpios = <&lsio_gpio3 28 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <	 0 0
+				      3000 1>;
+	};
+
+	/* TODO: LVDS Panel */
+
+	/* TODO: Shared PCIe/SATA Reference Clock */
+
+	/* TODO: PCIe Wi-Fi Reference Clock */
+
+	/*
+	 * Power management bus used to control LDO1OUT of the
+	 * second PMIC PF8100. This is used for controlling voltage levels of
+	 * typespecific RGMII signals and Apalis UART2_RTS UART2_CTS.
+	 *
+	 * IMX_SC_R_BOARD_R1 for 3.3V
+	 * IMX_SC_R_BOARD_R2 for 1.8V
+	 * IMX_SC_R_BOARD_R3 for 2.5V
+	 * Note that for 2.5V operation the pad muxing needs to be changed,
+	 * compare with PSW_OVR field of IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD.
+	 *
+	 * those power domains are mutually exclusive.
+	 */
+	reg_ext_rgmii: regulator-ext-rgmii {
+		compatible = "regulator-fixed";
+		power-domains = <&pd IMX_SC_R_BOARD_R1>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_EXT_RGMII (LDO1)";
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AUDIO";
+	};
+
+	reg_module_wifi: regulator-module-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pdn>;
+		gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "wifi_pwrdn_fake_regulator";
+		regulator-settling-time-us = <100>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	reg_pcie_switch: regulator-pcie-switch {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio7>;
+		gpio = <&lsio_gpio3 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "pcie_switch";
+		startup-delay-us = <100000>;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_en>;
+		/* Apalis USBH_EN */
+		gpio = <&lsio_gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-host-vbus";
+	};
+
+	reg_usb_hsic: regulator-usb-hsic {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "usb-hsic-dummy";
+	};
+
+	reg_usb_phy: regulator-usb-hsic1 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "usb-phy-dummy";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		decoder_boot: decoder-boot@84000000 {
+			reg = <0 0x84000000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder1_boot: encoder1-boot@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		encoder2_boot: encoder2-boot@86200000 {
+			reg = <0 0x86200000 0 0x200000>;
+			no-map;
+		};
+
+		/*
+		 * reserved-memory layout
+		 * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4
+		 * Shouldn't be used at A core and Linux side.
+		 *
+		 */
+		m4_reserved: m4@88000000 {
+			reg = <0 0x88000000 0 0x8000000>;
+			no-map;
+		};
+
+		rpmsg_reserved: rpmsg@90200000 {
+			reg = <0 0x90200000 0 0x200000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+
+		decoder_rpc: decoder-rpc@92000000 {
+			reg = <0 0x92000000 0 0x200000>;
+			no-map;
+		};
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder1_rpc: encoder1-rpc@94400000 {
+			reg = <0 0x94400000 0 0x700000>;
+			no-map;
+		};
+
+		encoder2_rpc: encoder2-rpc@94b00000 {
+			reg = <0 0x94b00000 0 0x700000>;
+			no-map;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+			size = <0 0x3c000000>;
+		};
+	};
+
+	/* TODO: Apalis Analogue Audio */
+
+	/* TODO: HDMI Audio */
+
+	/* TODO: Apalis SPDIF1 */
+
+	touchscreen: touchscreen {
+		compatible = "toradex,vf50-touchscreen";
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle", "default";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+		pinctrl-1 = <&pinctrl_adc1>, <&pinctrl_touchctrl_gpios>;
+		io-channels = <&adc1 2>, <&adc1 1>,
+			      <&adc1 0>, <&adc1 3>;
+		vf50-ts-min-pressure = <200>;
+		xp-gpios = <&lsio_gpio2 4 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&lsio_gpio2 5 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&lsio_gpio2 17 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&lsio_gpio2 21 GPIO_ACTIVE_HIGH>;
+		/*
+		 * NOTE: you must remove the pinctrl-adc1 from the adc1
+		 * node below to use the touchscreen
+		 */
+		status = "disabled";
+	};
+
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+};
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* Apalis ETH1 */
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <7>;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reset-assert-us = <2>;
+			reset-deassert-us = <2>;
+			reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>;
+			reset-names = "phy-reset";
+		};
+	};
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+/* Apalis CAN3 (optional) */
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+};
+
+/* TODO: Apalis HDMI1 */
+
+/* On-module I2C */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* TODO: Audio Codec */
+
+	/* USB3503A */
+	usb-hub@8 {
+		compatible = "smsc,usb3503a";
+		reg = <0x08>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503a>;
+		connect-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+		intn-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>;
+		refclk-frequency = <25000000>;
+		reset-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* Apalis I2C1 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+
+	atmel_mxt_ts: touch@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;		/* Apalis GPIO5 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpio6>;
+		reset-gpios = <&lsio_gpio4 2 GPIO_ACTIVE_LOW>;	/* Apalis GPIO6 */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+/* TODO: Apalis LVDS1 */
+
+/* Apalis SPI1 */
+&lpspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&lsio_gpio3 5 GPIO_ACTIVE_LOW>;
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_135",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_275",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_124",
+			  "MXM3_122",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "",
+			  "",
+			  "MXM3_4",
+			  "MXM3_211",
+			  "MXM3_209",
+			  "MXM3_2",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_112",
+			  "MXM3_118",
+			  "MXM3_114",
+			  "MXM3_116";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_286",
+			  "",
+			  "MXM3_87",
+			  "MXM3_99",
+			  "MXM3_138",
+			  "MXM3_140",
+			  "MXM3_239",
+			  "",
+			  "MXM3_281",
+			  "MXM3_283",
+			  "MXM3_126",
+			  "MXM3_132",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_173",
+			  "MXM3_175",
+			  "MXM3_123";
+
+	hdmi-ctrl-hog {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_ctrl>;
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_HIGH>;
+		line-name = "CONNECTOR_IS_HDMI";
+		/* Set signals depending on HDP device type, 0 DP, 1 HDMI */
+		output-high;
+	};
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_198",
+			  "MXM3_35",
+			  "MXM3_164",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_217",
+			  "MXM3_215",
+			  "",
+			  "",
+			  "MXM3_193",
+			  "MXM3_194",
+			  "MXM3_37",
+			  "",
+			  "MXM3_271",
+			  "MXM3_273",
+			  "MXM3_195",
+			  "MXM3_197",
+			  "MXM3_177",
+			  "MXM3_179",
+			  "MXM3_181",
+			  "MXM3_183",
+			  "MXM3_185",
+			  "MXM3_187";
+
+	/*
+	 * Add GPIO2_20 as a wakeup source:
+	 * Pin:  101	SC_P_SPI3_CS0 (MXM3_37/WAKE1_MICO)
+	 * Type: 5	SC_PAD_WAKEUP_FALL_EDGE
+	 * Line: 20
+	 */
+	pad-wakeup = <IMX8QM_SPI3_CS0 5 20>;
+	pad-wakeup-num = <1>;
+
+	pcie-wifi-hog {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		line-name = "PCIE_WIFI_CLK";
+		output-high;
+	};
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "MXM3_191",
+			  "",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_200",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_204",
+			  "MXM3_196",
+			  "",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "MXM3_305",
+			  "MXM3_307",
+			  "MXM3_309",
+			  "MXM3_311",
+			  "MXM3_315",
+			  "MXM3_317",
+			  "MXM3_319",
+			  "MXM3_321",
+			  "MXM3_15/GPIO7",
+			  "MXM3_63",
+			  "MXM3_17/GPIO8",
+			  "MXM3_12",
+			  "MXM3_14",
+			  "MXM3_16";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "MXM3_18",
+			  "MXM3_11/GPIO5",
+			  "MXM3_13/GPIO6",
+			  "MXM3_274",
+			  "MXM3_84",
+			  "MXM3_262",
+			  "MXM3_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "",
+			  "",
+			  "",
+			  "MXM3_269",
+			  "MXM3_251",
+			  "MXM3_253",
+			  "MXM3_295",
+			  "MXM3_299",
+			  "MXM3_301",
+			  "MXM3_297",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287";
+
+	/* Enable pcie root / sata ref clock unconditionally */
+	pcie-sata-hog {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		line-name = "PCIE_SATA_CLK";
+		output-high;
+	};
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_150",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_144",
+			  "MXM3_146",
+			  "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_159",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_186",
+			  "MXM3_188",
+			  "MXM3_176",
+			  "MXM3_178";
+};
+
+&lsio_gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_261",
+			  "MXM3_263",
+			  "MXM3_259",
+			  "MXM3_257",
+			  "MXM3_255",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_265",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_243";
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	#pwm-cells = <3>;
+};
+
+/* Messaging Units */
+&mu_m0{
+	status = "okay";
+};
+
+&mu1_m0{
+	status = "okay";
+};
+
+&mu2_m0{
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: On-module Wi-Fi */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Thermal Zones */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* TODO: Apalis USBH4 */
+
+/* Apalis USBO1 */
+&usbphy1 {
+	phy-3p0-supply = <&reg_usb_phy>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	adp-disable;
+	hnp-disable;
+	over-current-active-low;
+	power-active-high;
+	srp-disable;
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>,
+		    <&pinctrl_usdhc2_8bit>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>,
+		    <&pinctrl_usdhc2_8bit_100mhz>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>,
+		    <&pinctrl_usdhc2_8bit_200mhz>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>,
+		    <&pinctrl_usdhc2_8bit_sleep>,
+		    <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <8>;
+	cd-gpios = <&lsio_gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */
+	no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_sd1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_sd1_cd>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */
+	no-1-8-v;
+};
+
+/* Video Processing Unit */
+&vpu {
+	compatible = "nxp,imx8qm-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	reg = <0x2d080000 0x10000>;
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	reg = <0x2d090000 0x10000>;
+	memory-region = <&encoder1_boot>, <&encoder1_rpc>;
+	status = "okay";
+};
+
+&vpu_core2 {
+	reg = <0x2d0a0000 0x10000>;
+	memory-region = <&encoder2_boot>, <&encoder2_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_keys>,
+		    <&pinctrl_gpio_usbh_oc_n>, <&pinctrl_lpuart1ctrl>,
+		    <&pinctrl_lvds0_i2c0_gpio>, <&pinctrl_lvds1_i2c0_gpios>,
+		    <&pinctrl_mipi_dsi_0_1_en>, <&pinctrl_mipi_dsi1_gpios>,
+		    <&pinctrl_mlb_gpios>, <&pinctrl_qspi1a_gpios>,
+		    <&pinctrl_sata1_act>, <&pinctrl_sim0_gpios>,
+		    <&pinctrl_usdhc1_gpios>;
+
+	/* Apalis AN1_ADC */
+	pinctrl_adc0: adc0grp {
+		fsl,pins = /* Apalis AN1_ADC0 */
+			   <IMX8QM_ADC_IN0_DMA_ADC0_IN0				0xc0000060>,
+			   /* Apalis AN1_ADC1 */
+			   <IMX8QM_ADC_IN1_DMA_ADC0_IN1				0xc0000060>,
+			   /* Apalis AN1_ADC2 */
+			   <IMX8QM_ADC_IN2_DMA_ADC0_IN2				0xc0000060>,
+			   /* Apalis AN1_TSWIP_ADC3 */
+			   <IMX8QM_ADC_IN3_DMA_ADC0_IN3				0xc0000060>;
+	};
+
+	/* Apalis AN1_TS */
+	pinctrl_adc1: adc1grp {
+		fsl,pins = /* Apalis AN1_TSPX */
+			   <IMX8QM_ADC_IN4_DMA_ADC1_IN0				0xc0000060>,
+			   /* Apalis AN1_TSMX */
+			   <IMX8QM_ADC_IN5_DMA_ADC1_IN1				0xc0000060>,
+			   /* Apalis AN1_TSPY */
+			   <IMX8QM_ADC_IN6_DMA_ADC1_IN2				0xc0000060>,
+			   /* Apalis AN1_TSMY */
+			   <IMX8QM_ADC_IN7_DMA_ADC1_IN3				0xc0000060>;
+	};
+
+	/* Apalis CAM1 */
+	pinctrl_cam1_gpios: cam1gpiosgrp {
+		fsl,pins = /* Apalis CAM1_D7 */
+			   <IMX8QM_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20		0x00000021>,
+			   /* Apalis CAM1_D6 */
+			   <IMX8QM_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21		0x00000021>,
+			   /* Apalis CAM1_D5 */
+			   <IMX8QM_ESAI0_TX0_LSIO_GPIO2_IO26			0x00000021>,
+			   /* Apalis CAM1_D4 */
+			   <IMX8QM_ESAI0_TX1_LSIO_GPIO2_IO27			0x00000021>,
+			   /* Apalis CAM1_D3 */
+			   <IMX8QM_ESAI0_TX2_RX3_LSIO_GPIO2_IO28		0x00000021>,
+			   /* Apalis CAM1_D2 */
+			   <IMX8QM_ESAI0_TX3_RX2_LSIO_GPIO2_IO29		0x00000021>,
+			   /* Apalis CAM1_D1 */
+			   <IMX8QM_ESAI0_TX4_RX1_LSIO_GPIO2_IO30		0x00000021>,
+			   /* Apalis CAM1_D0 */
+			   <IMX8QM_ESAI0_TX5_RX0_LSIO_GPIO2_IO31		0x00000021>,
+			   /* Apalis CAM1_PCLK */
+			   <IMX8QM_MCLK_IN0_LSIO_GPIO3_IO00			0x00000021>,
+			   /* Apalis CAM1_MCLK */
+			   <IMX8QM_SPI3_SDO_LSIO_GPIO2_IO18			0x00000021>,
+			   /* Apalis CAM1_VSYNC */
+			   <IMX8QM_ESAI0_SCKR_LSIO_GPIO2_IO24			0x00000021>,
+			   /* Apalis CAM1_HSYNC */
+			   <IMX8QM_ESAI0_SCKT_LSIO_GPIO2_IO25			0x00000021>;
+	};
+
+	/* Apalis DAP1 */
+	pinctrl_dap1_gpios: dap1gpiosgrp {
+		fsl,pins = /* Apalis DAP1_MCLK */
+			   <IMX8QM_SPI3_SDI_LSIO_GPIO2_IO19			0x00000021>,
+			   /* Apalis DAP1_D_OUT */
+			   <IMX8QM_SAI1_RXC_LSIO_GPIO3_IO12			0x00000021>,
+			   /* Apalis DAP1_RESET */
+			   <IMX8QM_ESAI1_SCKT_LSIO_GPIO2_IO07			0x00000021>,
+			   /* Apalis DAP1_BIT_CLK */
+			   <IMX8QM_SPI0_CS1_LSIO_GPIO3_IO06			0x00000021>,
+			   /* Apalis DAP1_D_IN */
+			   <IMX8QM_SAI1_RXFS_LSIO_GPIO3_IO14			0x00000021>,
+			   /* Apalis DAP1_SYNC */
+			   <IMX8QM_SPI2_CS1_LSIO_GPIO3_IO11			0x00000021>,
+			   /* On-module Wi-Fi_I2S_EN# */
+			   <IMX8QM_ESAI1_TX5_RX0_LSIO_GPIO2_IO13		0x00000021>;
+	};
+
+	/* Apalis LCD1_G1+2 */
+	pinctrl_esai0_gpios: esai0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G1 */
+			   <IMX8QM_ESAI0_FSR_LSIO_GPIO2_IO22			0x00000021>,
+			   /* Apalis LCD1_G2 */
+			   <IMX8QM_ESAI0_FST_LSIO_GPIO2_IO23			0x00000021>;
+	};
+
+	/* On-module Gigabit Ethernet PHY Micrel KSZ9031 for Apalis GLAN */
+	pinctrl_fec1: fec1grp {
+		fsl,pins = /* Use pads in 3.3V mode */
+			   <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+			   <IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020>,
+			   <IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO				0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC			0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC			0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020>,
+			   <IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M	0x06000020>,
+			   /* On-module ETH_RESET# */
+			   <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x06000020>,
+			   /* On-module ETH_INT# */
+			   <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29			0x04000060>;
+	};
+
+	pinctrl_fec1_sleep: fec1-sleepgrp {
+		fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD		0x000014a0>,
+			   <IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14			0x04000040>,
+			   <IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13			0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09		0x04000040>,
+			   <IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15	0x04000040>,
+			   <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11			0x06000020>,
+			   <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29		0x04000040>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_fec2_gpios: fec2gpiosgrp {
+		fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD		0x000014a0>,
+			   /* Apalis LCD1_R1 */
+			   <IMX8QM_ENET1_MDC_LSIO_GPIO4_IO18			0x00000021>,
+			   /* Apalis LCD1_R0 */
+			   <IMX8QM_ENET1_MDIO_LSIO_GPIO4_IO17			0x00000021>,
+			   /* Apalis LCD1_G0 */
+			   <IMX8QM_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16	0x00000021>,
+			   /* Apalis LCD1_R7 */
+			   <IMX8QM_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17		0x00000021>,
+			   /* Apalis LCD1_DE */
+			   <IMX8QM_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18		0x00000021>,
+			   /* Apalis LCD1_HSYNC */
+			   <IMX8QM_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19		0x00000021>,
+			   /* Apalis LCD1_VSYNC */
+			   <IMX8QM_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20		0x00000021>,
+			   /* Apalis LCD1_PCLK */
+			   <IMX8QM_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21		0x00000021>,
+			   /* Apalis LCD1_R6 */
+			   <IMX8QM_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11		0x00000021>,
+			   /* Apalis LCD1_R5 */
+			   <IMX8QM_ENET1_RGMII_TXC_LSIO_GPIO6_IO10		0x00000021>,
+			   /* Apalis LCD1_R4 */
+			   <IMX8QM_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12		0x00000021>,
+			   /* Apalis LCD1_R3 */
+			   <IMX8QM_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13		0x00000021>,
+			   /* Apalis LCD1_R2 */
+			   <IMX8QM_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14		0x00000021>;
+	};
+
+	/* Apalis CAN1 */
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX			0x00000021>;
+	};
+
+	/* Apalis CAN2 */
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX			0x00000021>;
+	};
+
+	/* Apalis CAN3 (optional) */
+	pinctrl_flexcan3: flexcan2grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX			0x00000021>;
+	};
+
+	/* Apalis GPIO1 */
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <IMX8QM_M40_GPIO0_00_LSIO_GPIO0_IO08			0x06000021>;
+	};
+
+	/* Apalis GPIO2 */
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <IMX8QM_M40_GPIO0_01_LSIO_GPIO0_IO09			0x06000021>;
+	};
+
+	/* Apalis GPIO3 */
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <IMX8QM_M41_GPIO0_00_LSIO_GPIO0_IO12			0x06000021>;
+	};
+
+	/* Apalis GPIO4 */
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <IMX8QM_M41_GPIO0_01_LSIO_GPIO0_IO13			0x06000021>;
+	};
+
+	/* Apalis GPIO5 */
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_RX_LSIO_GPIO4_IO01			0x06000021>;
+	};
+
+	/* Apalis GPIO6 */
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_TX_LSIO_GPIO4_IO02			0x00000021>;
+	};
+
+	/* Apalis GPIO7 */
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins = <IMX8QM_MLB_SIG_LSIO_GPIO3_IO26			0x00000021>;
+	};
+
+	/* Apalis GPIO8 */
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins = <IMX8QM_MLB_DATA_LSIO_GPIO3_IO28			0x00000021>;
+	};
+
+	/* Apalis BKL1_ON */
+	pinctrl_gpio_bkl_on: gpiobklongrp {
+		fsl,pins = <IMX8QM_LVDS0_GPIO00_LSIO_GPIO1_IO04			0x00000021>;
+	};
+
+	/* Apalis WAKE1_MICO */
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <IMX8QM_SPI3_CS0_LSIO_GPIO2_IO20			0x06700021>;
+	};
+
+	/* Apalis USBH_OC# */
+	pinctrl_gpio_usbh_oc_n: gpiousbhocngrp {
+		fsl,pins = <IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06			0x04000021>;
+	};
+
+	/* On-module HDMI_CTRL */
+	pinctrl_hdmi_ctrl: hdmictrlgrp {
+		fsl,pins = <IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30		0x00000061>;
+	};
+
+	/* On-module I2C */
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <IMX8QM_GPT0_CLK_DMA_I2C1_SCL			0x04000020>,
+			   <IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA			0x04000020>;
+	};
+
+	/* Apalis I2C1 */
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <IMX8QM_GPT1_CLK_DMA_I2C2_SCL			0x04000020>,
+			   <IMX8QM_GPT1_CAPTURE_DMA_I2C2_SDA			0x04000020>;
+	};
+
+	/* Apalis I2C3 (CAM) */
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <IMX8QM_SIM0_PD_DMA_I2C3_SCL				0x04000020>,
+			   <IMX8QM_SIM0_POWER_EN_DMA_I2C3_SDA			0x04000020>;
+	};
+
+	/* Apalis SPI1 */
+	pinctrl_lpspi0: lpspi0grp {
+		fsl,pins = <IMX8QM_SPI0_SCK_DMA_SPI0_SCK			0x0600004c>,
+			   <IMX8QM_SPI0_SDO_DMA_SPI0_SDO			0x0600004c>,
+			   <IMX8QM_SPI0_SDI_DMA_SPI0_SDI			0x0600004c>,
+			   <IMX8QM_SPI0_CS0_LSIO_GPIO3_IO05			0x0600004c>;
+	};
+
+	/* Apalis SPI2 */
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <IMX8QM_SPI2_SCK_DMA_SPI2_SCK			0x0600004c>,
+			   <IMX8QM_SPI2_SDO_DMA_SPI2_SDO			0x0600004c>,
+			   <IMX8QM_SPI2_SDI_DMA_SPI2_SDI			0x0600004c>,
+			   <IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10			0x0600004c>;
+	};
+
+	/* Apalis UART3 */
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QM_UART0_RX_DMA_UART0_RX			0x06000020>,
+			   <IMX8QM_UART0_TX_DMA_UART0_TX			0x06000020>;
+	};
+
+	/* Apalis UART1 */
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX8QM_UART1_RX_DMA_UART1_RX			0x06000020>,
+			   <IMX8QM_UART1_TX_DMA_UART1_TX			0x06000020>,
+			   <IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B			0x06000020>,
+			   <IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B			0x06000020>;
+	};
+
+	/* Apalis UART1 */
+	pinctrl_lpuart1ctrl: lpuart1ctrlgrp {
+		fsl,pins = /* Apalis UART1_DTR */
+			   <IMX8QM_M40_I2C0_SCL_LSIO_GPIO0_IO06			0x00000021>,
+			   /* Apalis UART1_DSR */
+			   <IMX8QM_M40_I2C0_SDA_LSIO_GPIO0_IO07			0x00000021>,
+			   /* Apalis UART1_DCD */
+			   <IMX8QM_M41_I2C0_SCL_LSIO_GPIO0_IO10			0x00000021>,
+			   /* Apalis UART1_RI */
+			   <IMX8QM_M41_I2C0_SDA_LSIO_GPIO0_IO11			0x00000021>;
+	};
+
+	/* Apalis UART4 */
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <IMX8QM_LVDS0_I2C1_SCL_DMA_UART2_TX			0x06000020>,
+			   <IMX8QM_LVDS0_I2C1_SDA_DMA_UART2_RX			0x06000020>;
+	};
+
+	/* Apalis UART2 */
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QM_LVDS1_I2C1_SCL_DMA_UART3_TX			0x06000020>,
+			   <IMX8QM_LVDS1_I2C1_SDA_DMA_UART3_RX			0x06000020>,
+			   <IMX8QM_ENET1_RGMII_TXD3_DMA_UART3_RTS_B		0x06000020>,
+			   <IMX8QM_ENET1_RGMII_RXC_DMA_UART3_CTS_B		0x06000020>;
+	};
+
+	/* Apalis TS_2 */
+	pinctrl_lvds0_i2c0_gpio: lvds0i2c0gpiogrp {
+		fsl,pins = <IMX8QM_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06		0x00000021>;
+	};
+
+	/* Apalis LCD1_G6+7 */
+	pinctrl_lvds1_i2c0_gpios: lvds1i2c0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G6 */
+			   <IMX8QM_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12		0x00000021>,
+			   /* Apalis LCD1_G7 */
+			   <IMX8QM_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13		0x00000021>;
+	};
+
+	/* Apalis TS_3 */
+	pinctrl_mipi_dsi_0_1_en: mipidsi0-1engrp {
+		fsl,pins = <IMX8QM_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07		0x00000021>;
+	};
+
+	/* Apalis TS_4 */
+	pinctrl_mipi_dsi1_gpios: mipidsi1gpiosgrp {
+		fsl,pins = <IMX8QM_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22		0x00000021>;
+	};
+
+	/* Apalis TS_1 */
+	pinctrl_mlb_gpios: mlbgpiosgrp {
+		fsl,pins = <IMX8QM_MLB_CLK_LSIO_GPIO3_IO27			0x00000021>;
+	};
+
+	/* Apalis MMC1_CD# */
+	pinctrl_mmc1_cd: mmc1cdgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09			0x00000021>;
+	};
+
+	pinctrl_mmc1_cd_sleep: mmc1cdsleepgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09			0x04000021>;
+	};
+
+	/* On-module PCIe_Wi-Fi */
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QM_PCIE_CTRL1_CLKREQ_B_LSIO_GPIO4_IO30		0x00000021>,
+			   <IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31		0x00000021>,
+			   <IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00		0x00000021>;
+	};
+
+	/* On-module PCIe_CLK_EN1 */
+	pinctrl_pcie_sata_refclk: pciesatarefclkgrp {
+		fsl,pins = <IMX8QM_USDHC2_WP_LSIO_GPIO4_IO11			0x00000021>;
+	};
+
+	/* On-module PCIe_CLK_EN2 */
+	pinctrl_pcie_wifi_refclk: pciewifirefclkgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX3_RX2_LSIO_GPIO2_IO11		0x00000021>;
+	};
+
+	/* Apalis PWM3 */
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <IMX8QM_UART0_RTS_B_LSIO_PWM0_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM4 */
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <IMX8QM_UART0_CTS_B_LSIO_PWM1_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM1 */
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <IMX8QM_GPT1_COMPARE_LSIO_PWM2_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM2 */
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <IMX8QM_GPT0_COMPARE_LSIO_PWM3_OUT			0x00000020>;
+	};
+
+	/* Apalis BKL1_PWM */
+	pinctrl_pwm_bkl: pwmbklgrp {
+		fsl,pins = <IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT			0x00000020>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_qspi1a_gpios: qspi1agpiosgrp {
+		fsl,pins = /* Apalis LCD1_B0 */
+			   <IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26			0x00000021>,
+			   /* Apalis LCD1_B1 */
+			   <IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25			0x00000021>,
+			   /* Apalis LCD1_B2 */
+			   <IMX8QM_QSPI1A_DATA2_LSIO_GPIO4_IO24			0x00000021>,
+			   /* Apalis LCD1_B3 */
+			   <IMX8QM_QSPI1A_DATA3_LSIO_GPIO4_IO23			0x00000021>,
+			   /* Apalis LCD1_B5 */
+			   <IMX8QM_QSPI1A_DQS_LSIO_GPIO4_IO22			0x00000021>,
+			   /* Apalis LCD1_B7 */
+			   <IMX8QM_QSPI1A_SCLK_LSIO_GPIO4_IO21			0x00000021>,
+			   /* Apalis LCD1_B4 */
+			   <IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19			0x00000021>,
+			   /* Apalis LCD1_B6 */
+			   <IMX8QM_QSPI1A_SS1_B_LSIO_GPIO4_IO20			0x00000021>;
+	};
+
+	/* On-module RESET_MOCI#_DRV */
+	pinctrl_reset_moci: resetmocigrp {
+		fsl,pins = <IMX8QM_SCU_GPIO0_02_LSIO_GPIO0_IO30			0x00000021>;
+	};
+
+	/* On-module I2S SGTL5000 for Apalis Analogue Audio */
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QM_SAI1_TXD_AUD_SAI1_TXD			0xc600006c>,
+			   <IMX8QM_SAI1_RXD_AUD_SAI1_RXD			0xc600004c>,
+			   <IMX8QM_SAI1_TXC_AUD_SAI1_TXC			0xc600004c>,
+			   <IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS			0xc600004c>;
+	};
+
+	/* Apalis SATA1_ACT# */
+	pinctrl_sata1_act: sata1actgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX0_LSIO_GPIO2_IO08			0x00000021>;
+	};
+
+	/* Apalis SD1_CD# */
+	pinctrl_sd1_cd: sd1cdgrp {
+		fsl,pins = <IMX8QM_USDHC2_CD_B_LSIO_GPIO4_IO12			0x00000021>;
+	};
+
+	/* On-module I2S SGTL5000 SYS_MCLK */
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0			0xc600004c>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_sim0_gpios: sim0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G5 */
+			   <IMX8QM_SIM0_CLK_LSIO_GPIO0_IO00			0x00000021>,
+			   /* Apalis LCD1_G3 */
+			   <IMX8QM_SIM0_GPIO0_00_LSIO_GPIO0_IO05		0x00000021>,
+			   /* Apalis TS_5 */
+			   <IMX8QM_SIM0_IO_LSIO_GPIO0_IO02			0x00000021>,
+			   /* Apalis LCD1_G4 */
+			   <IMX8QM_SIM0_RST_LSIO_GPIO0_IO01			0x00000021>;
+	};
+
+	/* Apalis SPDIF */
+	pinctrl_spdif0: spdif0grp {
+		fsl,pins = <IMX8QM_SPDIF0_TX_AUD_SPDIF0_TX			0xc6000040>,
+			   <IMX8QM_SPDIF0_RX_AUD_SPDIF0_RX			0xc6000040>;
+	};
+
+	pinctrl_touchctrl_gpios: touchctrlgpiosgrp {
+		fsl,pins = <IMX8QM_ESAI1_FSR_LSIO_GPIO2_IO04			0x00000021>,
+			   <IMX8QM_ESAI1_FST_LSIO_GPIO2_IO05			0x00000041>,
+			   <IMX8QM_SPI3_SCK_LSIO_GPIO2_IO17			0x00000021>,
+			   <IMX8QM_SPI3_CS1_LSIO_GPIO2_IO21			0x00000041>;
+	};
+
+	pinctrl_touchctrl_idle: touchctrlidlegrp {
+		fsl,pins = <IMX8QM_ADC_IN4_LSIO_GPIO3_IO22			0x00000021>,
+			   <IMX8QM_ADC_IN5_LSIO_GPIO3_IO23			0x00000021>,
+			   <IMX8QM_ADC_IN6_LSIO_GPIO3_IO24			0x00000021>,
+			   <IMX8QM_ADC_IN7_LSIO_GPIO3_IO25			0x00000021>;
+	};
+
+	/* On-module USB HSIC HUB (active) */
+	pinctrl_usb_hsic_active: usbh1activegrp {
+		fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA		0x000000cf>,
+			   <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE	0x000000ff>;
+	};
+
+	/* On-module USB HSIC HUB (idle) */
+	pinctrl_usb_hsic_idle: usbh1idlegrp {
+		fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA		0x000000cf>,
+			   <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE	0x000000cf>;
+	};
+
+	/* On-module USB HSIC HUB */
+	pinctrl_usb3503a: usb3503agrp {
+		fsl,pins = /* On-module HSIC_HUB_CONNECT */
+			   <IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31			0x00000041>,
+			   /* On-module HSIC_INT_N */
+			   <IMX8QM_SCU_GPIO0_05_LSIO_GPIO1_IO01			0x00000021>,
+			   /* On-module HSIC_RESET_N */
+			   <IMX8QM_SCU_GPIO0_06_LSIO_GPIO1_IO02			0x00000041>;
+	};
+
+	/* Apalis USBH_EN */
+	pinctrl_usbh_en: usbhengrp {
+		fsl,pins = <IMX8QM_USB_SS3_TC1_LSIO_GPIO4_IO04			0x00000021>;
+	};
+
+	/* Apalis USBO1 */
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = /* Apalis USBO1_EN */
+			   <IMX8QM_USB_SS3_TC0_CONN_USB_OTG1_PWR		0x00000021>,
+			   /* Apalis USBO1_OC# */
+			   <IMX8QM_USB_SS3_TC2_CONN_USB_OTG1_OC			0x04000021>;
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000041>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000021>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000040>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000020>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000020>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000020>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000020>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000020>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000020>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000020>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000020>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000020>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000040>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000020>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000040>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000020>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000020>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000020>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000020>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000020>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000020>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000020>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000020>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000020>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000040>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000020>;
+	};
+
+	/* Apalis TS_6 */
+	pinctrl_usdhc1_gpios: usdhc1gpiosgrp {
+		fsl,pins = <IMX8QM_USDHC1_STROBE_LSIO_GPIO5_IO23		0x00000021>;
+	};
+
+	/* Apalis MMC1 */
+	pinctrl_usdhc2_4bit: usdhc2grp4bitgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000021>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000021>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000021>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_4bit_100mhz: usdhc2-4bit100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000040>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000020>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000020>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000020>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000020>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000020>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_4bit_200mhz: usdhc2-4bit200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000040>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000020>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000020>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000020>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000020>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000020>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit: usdhc2grp8bitgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000021>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000021>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000021>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit_100mhz: usdhc2-8bit100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000020>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000020>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000020>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000020>;
+	};
+
+	pinctrl_usdhc2_8bit_200mhz: usdhc2-8bit200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000020>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000020>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000020>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000020>;
+	};
+
+	pinctrl_usdhc2_4bit_sleep: usdhc2-4bitsleepgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x04000061>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x04000061>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x04000061>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x04000061>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x04000061>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x04000061>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit_sleep: usdhc2-8bitsleepgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x04000061>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x04000061>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x04000061>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x04000061>;
+	};
+
+	/* Apalis SD1 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_wifi: wifigrp {
+		fsl,pins = /* On-module Wi-Fi_SUSCLK_32k */
+			   <IMX8QM_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x06000021>,
+			   /* On-module Wi-Fi_PCIE_W_DISABLE */
+			   <IMX8QM_MIPI_CSI0_MCLK_OUT_LSIO_GPIO1_IO24		0x06000021>;
+	};
+
+	pinctrl_wifi_pdn: wifipdngrp {
+		fsl,pins = /* On-module Wi-Fi_POWER_DOWN */
+			   <IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28		0x06000021>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index 4852760adeee..2209c1ac6e9b 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -35,7 +35,7 @@ conn_subsys: bus@5b000000 {
 	};
 
 	usbotg1: usb@5b0d0000 {
-		compatible = "fsl,imx7ulp-usb";
+		compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
 		reg = <0x5b0d0000 0x200>;
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
@@ -51,7 +51,7 @@ conn_subsys: bus@5b000000 {
 
 	usbmisc1: usbmisc@5b0d0200 {
 		#index-cells = <1>;
-		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx6q-usbmisc";
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
 		reg = <0x5b0d0200 0x200>;
 	};
 
@@ -138,6 +138,53 @@ conn_subsys: bus@5b000000 {
 		status = "disabled";
 	};
 
+	usbotg3: usb@5b110000 {
+		compatible = "fsl,imx8qm-usb3";
+		reg = <0x5b110000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
+			 <&usb3_lpcg IMX_LPCG_CLK_0>,
+			 <&usb3_lpcg IMX_LPCG_CLK_7>,
+			 <&usb3_lpcg IMX_LPCG_CLK_4>,
+			 <&usb3_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "lpm", "bus", "aclk", "ipg", "core";
+		assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		assigned-clock-rates = <250000000>;
+		power-domains = <&pd IMX_SC_R_USB_2>;
+		status = "disabled";
+
+		usbotg3_cdns3: usb@5b120000 {
+			compatible = "cdns,usb3";
+			reg = <0x5b130000 0x10000>,     /* memory area for HOST registers */
+			      <0x5b140000 0x10000>,   /* memory area for DEVICE registers */
+			      <0x5b120000 0x10000>;   /* memory area for OTG/DRD registers */
+			reg-names = "xhci", "dev", "otg";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host", "peripheral", "otg", "wakeup";
+			phys = <&usb3_phy>;
+			phy-names = "cdns3,usb3-phy";
+			status = "disabled";
+		};
+	};
+
+	usb3_phy: usb-phy@5b160000 {
+		compatible = "nxp,salvo-phy";
+		reg = <0x5b160000 0x40000>;
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_6>;
+		clock-names = "salvo_phy_clk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
 	/* LPCG clocks */
 	sdhc0_lpcg: clock-controller@5b200000 {
 		compatible = "fsl,imx8qxp-lpcg";
@@ -234,4 +281,26 @@ conn_subsys: bus@5b000000 {
 		clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk";
 		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
 	};
+
+	usb3_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		clock-output-names = "usb3_app_clk",
+				     "usb3_lpm_clk",
+				     "usb3_ipg_clk",
+				     "usb3_core_pclk",
+				     "usb3_phy_clk",
+				     "usb3_aclk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index a943a1e2797f..2dce8f2ee3ea 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -31,7 +31,7 @@ dma_subsys: bus@5a000000 {
 			 <&spi0_lpcg 1>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
-		assigned-clock-rates = <20000000>;
+		assigned-clock-rates = <60000000>;
 		power-domains = <&pd IMX_SC_R_SPI_0>;
 		status = "disabled";
 	};
@@ -270,6 +270,7 @@ dma_subsys: bus@5a000000 {
 
 	adc0: adc@5a880000 {
 		compatible = "nxp,imx8qxp-adc";
+		#io-channel-cells = <1>;
 		reg = <0x5a880000 0x10000>;
 		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
@@ -284,6 +285,7 @@ dma_subsys: bus@5a000000 {
 
 	adc1: adc@5a890000 {
 		compatible = "nxp,imx8qxp-adc";
+		#io-channel-cells = <1>;
 		reg = <0x5a890000 0x10000>;
 		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
@@ -296,6 +298,65 @@ dma_subsys: bus@5a000000 {
 		status = "disabled";
 	};
 
+	flexcan1: can@5a8d0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8d0000 0x10000>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&can0_lpcg 1>,
+			 <&can0_lpcg 0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_0>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <0>;
+		status = "disabled";
+	};
+
+	flexcan2: can@5a8e0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8e0000 0x10000>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		/* CAN0 clock and PD is shared among all CAN instances as
+		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
+		 * has to be powered on.
+		 */
+		clocks = <&can0_lpcg 1>,
+			 <&can0_lpcg 0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_1>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <1>;
+		status = "disabled";
+	};
+
+	flexcan3: can@5a8f0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8f0000 0x10000>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		/* CAN0 clock and PD is shared among all CAN instances as
+		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
+		 * has to be powered on.
+		 */
+		clocks = <&can0_lpcg 1>,
+			 <&can0_lpcg 0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_2>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <2>;
+		status = "disabled";
+	};
+
 	i2c0_lpcg: clock-controller@5ac00000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ac00000 0x10000>;
@@ -367,4 +428,17 @@ dma_subsys: bus@5a000000 {
 				     "adc1_lpcg_ipg_clk";
 		power-domains = <&pd IMX_SC_R_ADC_1>;
 	};
+
+	can0_lpcg: clock-controller@5acd0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5acd0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can0_lpcg_pe_clk",
+				     "can0_lpcg_ipg_clk",
+				     "can0_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_0>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 1f3d225e64ec..ea8c93757521 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -28,6 +28,54 @@ lsio_subsys: bus@5d000000 {
 		clock-output-names = "lsio_bus_clk";
 	};
 
+	lsio_pwm0: pwm@5d000000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d000000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm0_lpcg 4>,
+			 <&pwm0_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_pwm1: pwm@5d010000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d010000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm1_lpcg 4>,
+			 <&pwm1_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_pwm2: pwm@5d020000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d020000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm2_lpcg 4>,
+			 <&pwm2_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_pwm3: pwm@5d030000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d030000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm3_lpcg 4>,
+			 <&pwm3_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
 	lsio_gpio0: gpio@5d080000 {
 		reg = <0x5d080000 0x10000>;
 		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
@@ -117,7 +165,7 @@ lsio_subsys: bus@5d000000 {
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
 			 <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
-		clock-names = "fspi", "fspi_en";
+		clock-names = "fspi_en", "fspi";
 		power-domains = <&pd IMX_SC_R_FSPI_0>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 1bcf228a22b8..f542476187b3 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -121,8 +121,6 @@
 	phy-handle = <&ethphy0>;
 	nvmem-cells = <&fec_mac1>;
 	nvmem-cell-names = "mac-address";
-	snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
-	snps,reset-delays-us = <10 20 200000>;
 	status = "okay";
 
 	mdio {
@@ -136,6 +134,9 @@
 			eee-broken-1000t;
 			qca,disable-smarteee;
 			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
 			vddio-supply = <&vddio0>;
 
 			vddio0: vddio-regulator {
@@ -276,7 +277,7 @@
 };
 
 &thermal_zones {
-	pmic-thermal0 {
+	pmic-thermal {
 		polling-delay-passive = <250>;
 		polling-delay = <2000>;
 		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index ca195e6d8f37..652493ae4bb5 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -34,7 +34,7 @@
 	};
 
 	usbotg2: usb@5b0e0000 {
-		compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb";
+		compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
 		reg = <0x5b0e0000 0x200>;
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
@@ -49,7 +49,6 @@
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>;
 		rx-burst-size-dword = <0x10>;
-		#stream-id-cells = <1>;
 		power-domains = <&pd IMX_SC_R_USB_1>;
 		status = "disabled";
 
@@ -63,7 +62,7 @@
 
 	usbmisc2: usbmisc@5b0e0200 {
 		#index-cells = <1>;
-		compatible = "fsl,imx7ulp-usbmisc";
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
 		reg = <0x5b0e0200 0x200>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index 214f21bd0cb4..70fadd79851a 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -130,8 +130,6 @@
 		clk: clock-controller {
 			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
 			#clock-cells = <2>;
-			clocks = <&xtal32k &xtal24m>;
-			clock-names = "xtal_32KHz", "xtal_24Mhz";
 		};
 
 		scu_gpio: gpio {
@@ -188,7 +186,7 @@
 	};
 
 	thermal_zones: thermal-zones {
-		cpu-thermal0 {
+		cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
 			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
index 6c079c0a3a48..010e836ebe5c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
@@ -28,7 +28,7 @@
 };
 
 &iomuxc {
-	pinctrl_gpmi_nand: gpmi-nand {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE		0x00000096
 			MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B		0x00000096
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
index 3d859a350bd5..4e9e58acd262 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
@@ -124,7 +124,7 @@
 		>;
 	};
 
-	pinctrl_ecspi1_cs: ecspi1-cs {
+	pinctrl_ecspi1_cs: ecspi1cs-grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40000
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x40000
@@ -215,7 +215,7 @@
 		>;
 	};
 
-	pinctrl_pmic: pmic-irq {
+	pinctrl_pmic: pmicirq-grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x41
 		>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index d1a6390976a9..3f9dfd4d3884 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -194,7 +194,7 @@
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 6357078185ed..0e8f0d7161ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -247,7 +247,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&clk IMX8MM_CLK_SAI1_ROOT>;
-		clock-names = "mclk1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
index 266129b4a70d..03e7679217b2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -168,6 +168,12 @@
 		"", "ECSPI1_SS0";
 };
 
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+};
+
 /* PCIe */
 &pcie0 {
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
@@ -333,6 +339,13 @@
 		>;
 	};
 
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c2
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c2
+		>;
+	};
+
 	pinctrl_leds: leds1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x16
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
index 9fbbbb556c0b..1eb1fe7ebde8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
@@ -264,7 +264,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
 			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
@@ -280,7 +280,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
 			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 88321b5b0693..6f0811587142 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -99,7 +99,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
 		regulator-always-on;
@@ -139,7 +139,7 @@
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 31f4548f85cf..d6b36f04f3dc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1119,6 +1119,61 @@
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
 
+			lcdif: lcdif@32e00000 {
+				compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x32e00000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
+					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
+						  <&clk IMX8MM_CLK_DISP_AXI>,
+						  <&clk IMX8MM_CLK_DISP_APB>;
+				assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MM_SYS_PLL2_1000M>,
+							 <&clk IMX8MM_SYS_PLL1_800M>;
+				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif>;
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e10000 {
+				compatible = "fsl,imx8mm-mipi-dsim";
+				reg = <0x32e10000 0x400>;
+				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
+					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
+						  <&clk IMX8MM_CLK_DSI_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
+							 <&clk IMX8MM_CLK_24M>;
+				assigned-clock-rates = <266000000>, <24000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif: endpoint {
+							remote-endpoint = <&lcdif_to_dsim>;
+						};
+					};
+				};
+			};
+
 			csi: csi@32e20000 {
 				compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
 				reg = <0x32e20000 0x1000>;
@@ -1198,7 +1253,7 @@
 			};
 
 			usbotg1: usb@32e40000 {
-				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x32e40000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
@@ -1212,13 +1267,14 @@
 			};
 
 			usbmisc1: usbmisc@32e40200 {
-				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
+				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
 				#index-cells = <1>;
 				reg = <0x32e40200 0x200>;
 			};
 
 			usbotg2: usb@32e50000 {
-				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x32e50000 0x200>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
@@ -1232,7 +1288,8 @@
 			};
 
 			usbmisc2: usbmisc@32e50200 {
-				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
+				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
 				#index-cells = <1>;
 				reg = <0x32e50200 0x200>;
 			};
@@ -1315,6 +1372,30 @@
 			status = "disabled";
 		};
 
+		pcie0_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mm-pcie-ep";
+			reg = <0x33800000 0x400000>,
+			      <0x18000000 0x8000000>;
+			reg-names = "dbi", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			fsl,max-link-speed = <2>;
+			clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MM_CLK_PCIE1_PHY>,
+				 <&clk IMX8MM_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
+		};
+
 		gpu_3d: gpu@38000000 {
 			compatible = "vivante,gc";
 			reg = <0x38000000 0x8000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index c11895d9d582..8e100e71b8d2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -341,7 +341,7 @@
 		>;
 	};
 
-	pinctrl_pmic: pmicirq {
+	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x040
 		>;
@@ -381,7 +381,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x094
 			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d4
@@ -392,7 +392,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x096
 			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d6
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
index 33f98582eace..7acc5a960dd9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
@@ -26,7 +26,7 @@
 };
 
 &iomuxc {
-	pinctrl_gpmi_nand: gpmi-nand {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE		0x00000096
 			MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B		0x00000096
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
index fbbb3367037b..c6ad65becc97 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
@@ -136,7 +136,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000094
 			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d4
@@ -152,7 +152,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000096
 			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d6
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 8fef980c4ab2..1443857bfa5f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -389,7 +389,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_gpio: i2c2grp-gpio {
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x1c3
 			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x1c3
@@ -403,7 +403,7 @@
 		>;
 	};
 
-	pinctrl_i2c3_gpio: i2c3grp-gpio {
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x1c3
 			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x1c3
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index ed9ac6c5047c..bd84db550053 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -296,6 +296,7 @@
 				sai2: sai@30020000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30020000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
 						<&clk IMX8MN_CLK_DUMMY>,
@@ -310,6 +311,7 @@
 				sai3: sai@30030000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30030000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -324,6 +326,7 @@
 				sai5: sai@30050000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30050000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -340,6 +343,7 @@
 				sai6: sai@30060000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30060000  0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -397,6 +401,7 @@
 				sai7: sai@300b0000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x300b0000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -1057,6 +1062,61 @@
 			#size-cells = <1>;
 			ranges;
 
+			lcdif: lcdif@32e00000 {
+				compatible = "fsl,imx8mn-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x32e00000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				assigned-clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+						  <&clk IMX8MN_CLK_DISP_AXI>,
+						  <&clk IMX8MN_CLK_DISP_APB>;
+				assigned-clock-parents = <&clk IMX8MN_CLK_DISP_PIXEL>,
+							 <&clk IMX8MN_SYS_PLL2_1000M>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif>;
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e10000 {
+				compatible = "fsl,imx8mn-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+				reg = <0x32e10000 0x400>;
+				clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+					 <&clk IMX8MN_CLK_DSI_PHY_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+						  <&clk IMX8MN_CLK_DSI_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
+							 <&clk IMX8MN_CLK_24M>;
+				assigned-clock-rates = <266000000>, <24000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif: endpoint {
+							remote-endpoint = <&lcdif_to_dsim>;
+						};
+					};
+				};
+			};
+
 			disp_blk_ctrl: blk-ctrl@32e28000 {
 				compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
 				reg = <0x32e28000 0x100>;
@@ -1086,7 +1146,7 @@
 			};
 
 			usbotg1: usb@32e40000 {
-				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
+				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x32e40000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
@@ -1100,7 +1160,8 @@
 			};
 
 			usbmisc1: usbmisc@32e40200 {
-				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
+				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
 				#index-cells = <1>;
 				reg = <0x32e40200 0x200>;
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
new file mode 100644
index 000000000000..13674dc64be9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -0,0 +1,977 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/qca-ar803x.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Data Modul i.MX8M Plus eDM SBC";
+	compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* There are 1/2/4 GiB options, adjusted by bootloader. */
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_backlight>;
+		brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 5000000 0>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	clk_xtal25: clock-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	panel: panel {
+		/* Compatible string is filled in by panel board DT Overlay. */
+		backlight = <&backlight>;
+		power-supply = <&reg_panel_vcc>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_panel_vcc: regulator-panel-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_vcc_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "PANEL_VCC";
+		/* GPIO flags are ignored, enable-active-high applies. */
+		gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_SD";
+		/* GPIO flags are ignored, enable-active-high applies. */
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */
+		enable-active-high;
+		off-on-delay-us = <12000>;
+		startup-delay-us = <100>;
+		vin-supply = <&buck4>;
+	};
+
+	watchdog { /* TPS3813 */
+		compatible = "linux,wdt-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_watchdog_gpio>;
+		always-running;
+		gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		hw_algo = "level";
+		/* Reset triggers in 2..3 seconds */
+		hw_margin_ms = <1500>;
+		/* Disabled by default */
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {	/* W25Q128JVEI */
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;	/* Up to 133 MHz */
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
+
+&ecspi2 {	/* Feature connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless feature board plugged in. */
+	status = "disabled";
+};
+
+&ecspi3 {	/* Display connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-handle = <&phy_eqos>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8031 PHY */
+		phy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			/*
+			 * Dedicated ENET_WOL# signal is unused, the PHY
+			 * can wake the SoC up via INT signal as well.
+			 */
+			interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio_eqos>;
+
+			vddio_eqos: vddio-regulator {
+				regulator-name = "VDDIO_EQOS";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh_eqos: vddh-regulator {
+				regulator-name = "VDDH_EQOS";
+			};
+		};
+	};
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-handle = <&phy_fec>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8031 PHY */
+		phy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			/*
+			 * Dedicated ENET_WOL# signal is unused, the PHY
+			 * can wake the SoC up via INT signal as well.
+			 */
+			interrupts-extended = <&gpio2 2 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio_fec>;
+
+			vddio_fec: vddio-regulator {
+				regulator-name = "VDDIO_FEC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh_fec: vddh-regulator {
+				regulator-name = "VDDH_FEC";
+			};
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "USBHUB_RESET#", "WDOG_B#", "PMIC_INT#",
+		"", "M2_PCIE_RST#", "M2_PCIE_WAKE#", "GPIO5_IO03",
+		"GPIO5_IO04", "PDM_SEL", "ENET_WOL#", "ENET_INT#",
+		"", "", "", "ENET_RST#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "ENET2_INT#", "", "", "", "", "",
+		"WDOG_KICK#", "ENET2_RST#", "CAN_INT#", "RTC_IRQ#",
+		"", "", "", "",
+		"", "", "", "SD2_RESET#", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
+		"", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
+		"CSI2_PD_1V8", "CSI2_RESET_1V8#", "", "",
+		"", "", "EEPROM_WP_1V8#", "", "", "", "", "",
+		"MEMCFG0", "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#",
+		"", "M2_W_DISABLE1_1V8#",
+		"M2_W_DISABLE2_1V8#", "", "I2C5_SCL_3V3", "I2C5_SDA_3V3",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"DSI_RESET_1V8#", "MEMCFG2", "", "MEMCFG1", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "GRAPHICS_PRSNT_1V8#", "DSI_IRQ_1V8#",
+		"", "DIS_USB_DN1", "DIS_USB_DN2", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "WDOG_EN", "", "",
+		"", "SPI1_CS#", "", "",
+		"", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
+		"I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
+		"", "", "", "",
+		"", "SPI3_CS#", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	usb-hub@2c {
+		compatible = "microchip,usb2514bi";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		individual-port-switching;
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		self-powered;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pcieclk: clk@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8CVNKZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4: BUCK4 {	/* VDD_3V3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* VDD_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* PMIC_LDO4 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&i2c5 {	/* HDMI EDID bus */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_panel_pwm>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+/* SD slot */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&uart1 {	/* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";	/* Optional */
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {	/* A53 Debug */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb_dwc3_0 {	/* Lower plug direct */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {	/* Upper plug via HUB */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
+
+/* IOMUXC node should be at the end of DT to improve readability. */
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
+		    <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
+		    <&pinctrl_panel_expansion>;
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x44
+			MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x44
+			MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x44
+			MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x40
+		>;
+	};
+
+	pinctrl_eqos: eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+			/* ENET_RST# */
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x6
+			/* ENET_INT# */
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x40000090
+		>;
+	};
+
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			/* ENET2_RST# */
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x6
+			/* ENET2_INT# */
+			MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x40000090
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_hog_feature: hog-feature-grp {
+		fsl,pins = <
+			/* GPIO5_IO03 */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x40000006
+			/* GPIO5_IO04 */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x40000006
+
+			/* CAN_INT# */
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x40000090
+		>;
+	};
+
+	pinctrl_hog_panel: hog-panel-grp {
+		fsl,pins = <
+			/* GRAPHICS_GPIO0_1V8 */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x26
+		>;
+	};
+
+	pinctrl_hog_misc: hog-misc-grp {
+		fsl,pins = <
+			/* ENET_WOL# -- shared by both PHYs */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x40000090
+
+			/* PG_V_IN_VAR# */
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01		0x40000000
+			/* CSI2_PD_1V8 */
+			MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08		0x0
+			/* CSI2_RESET_1V8# */
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09		0x0
+
+			/* DIS_USB_DN1 */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x0
+			/* DIS_USB_DN2 */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x0
+
+			/* EEPROM_WP_1V8# */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x100
+			/* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x0
+			/* GRAPHICS_PRSNT_1V8# */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x40000000
+
+			/* CLK_CCM_CLKO1_3V3 */
+			MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1		0x10
+		>;
+	};
+
+	pinctrl_hog_sbc: hog-sbc-grp {
+		fsl,pins = <
+			/* MEMCFG[0..2] straps */
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x40000140
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x40000140
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x40000140
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x40000084
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x84
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x84
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x40000084
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x84
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x84
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x40000084
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x84
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x84
+		>;
+	};
+
+	pinctrl_i2c5: i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x40000084
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x40000084
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x84
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x84
+		>;
+	};
+
+	pinctrl_panel_backlight: panel-backlight-grp {
+		fsl,pins = <
+			/* BL_ENABLE_1V8 */
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x104
+		>;
+	};
+
+	pinctrl_panel_expansion: panel-expansion-grp {
+		fsl,pins = <
+			/* DSI_RESET_1V8# */
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x2
+			/* DSI_IRQ_1V8# */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x40000090
+		>;
+	};
+
+	pinctrl_panel_pwm: panel-pwm-grp {
+		fsl,pins = <
+			/* BL_PWM_3V3 */
+			MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT			0x12
+		>;
+	};
+
+	pinctrl_panel_vcc_reg: panel-vcc-grp {
+		fsl,pins = <
+			/* TFT_ENABLE_1V8 */
+			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06		0x104
+		>;
+	};
+
+	pinctrl_pcie0: pcie-grp {
+		fsl,pins = <
+			/* M2_PCIE_RST# */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x2
+			/* M2_W_DISABLE1_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x2
+			/* M2_W_DISABLE2_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x2
+			/* CLK_M2_32K768 */
+			MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1		0x14
+			/* M2_PCIE_WAKE# */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40000140
+			/* M2_PCIE_CLKREQ# */
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B		0x61
+		>;
+	};
+
+	pinctrl_pdm: pdm-grp {
+		fsl,pins = <
+			/* PDM_SEL */
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x0
+			MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK		0x0
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00	0x0
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			/* PMIC_nINT */
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40000090
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			/* RTC_IRQ# */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x40000090
+		>;
+	};
+
+	pinctrl_sai1: sai1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK	0xd6
+			MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x49
+			MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX		0x49
+			MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS		0x49
+			MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX		0x49
+			MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX		0x49
+			MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS		0x49
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x20
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x40000080
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usb_hub: usb-hub-grp {
+		fsl,pins = <
+			/* USBHUB_RESET# */
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x4
+		>;
+	};
+
+	pinctrl_usb1: usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR		0x6
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x80
+		>;
+	};
+
+	pinctrl_watchdog_gpio: watchdog-gpio-grp {
+		fsl,pins = <
+			/* WDOG_B# */
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x26
+			/* WDOG_EN -- ungate WDT RESET# signal propagation */
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x6
+			/* WDOG_KICK# / WDI */
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x26
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index 2876d18f2a38..b4409349eb3f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -43,6 +43,17 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_hub>;
+		regulator-name = "USB_HUB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &A53_0 {
@@ -254,6 +265,41 @@
 	status = "okay";
 };
 
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "okay";
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_usb_hub>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_usb_hub>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
 /* SD Card */
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -384,6 +430,12 @@
 		>;
 	};
 
+	pinctrl_reg_usb_hub: regusbhubgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26				0x19
+		>;
+	};
+
 	pinctrl_rtc_int: rtcintgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11				0x140
@@ -411,6 +463,13 @@
 		>;
 	};
 
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR				0x10
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25				0x19
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index 382fbedaf6ba..92df6c1277c3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -104,20 +104,10 @@
 	};
 };
 
-/*
- * PDK2 carrier board uses SoM with KSZ9131 populated and connected to
- * SoM EQoS ethernet RGMII interface. Remove the other SoM PHY DT node.
- */
-/delete-node/ &ethphy0f;
-
-/*
- * PDK2 carrier board has KSZ9021 PHY populated and connected to SoM FEC
- * ethernet RGMII interface. The SoM is not populated with second FEC PHY.
- */
-/delete-node/ &ethphy1f;
-
 &fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
 	phy-handle = <&ethphypdk>;
+	phy-mode = "rgmii";
 
 	mdio {
 		ethphypdk: ethernet-phy@7 { /* KSZ 9021 */
@@ -151,6 +141,20 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	clock-names = "ref";
+	clocks = <&clk IMX8MP_SYS_PLL2_100M>;
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_UNUSED>;
+	status = "okay";
+};
+
+&pcie {
+	fsl,max-link-speed = <1>;
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;	/* GPIO J */
+	status = "okay";
+};
+
 &usb3_1 {
 	fsl,over-current-active-low;
 };
@@ -159,7 +163,7 @@
 	/*
 	 * GPIO_A,B,C,D are connected to buttons.
 	 * GPIO_E,F,H,I are connected to LEDs.
-	 * GPIO_M is connected to CLKOUT2.
+	 * GPIO_M is connected to CLKOUT1.
 	 */
 	pinctrl-0 = <&pinctrl_hog_base
 		     &pinctrl_dhcom_g &pinctrl_dhcom_j
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
new file mode 100644
index 000000000000..b5e76b992a10
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * PDK3 PCB number: 669-100 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)";
+	compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	clk_pcie: clock-pcie {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				usb_c_0_hs_ep: endpoint {
+					remote-endpoint = <&dwc3_0_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				usb_c_0_ss_ep: endpoint {
+					remote-endpoint = <&ptn5150_in_ep>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			pinctrl-0 = <&pinctrl_dhcom_a>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			pinctrl-0 = <&pinctrl_dhcom_b>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			pinctrl-0 = <&pinctrl_dhcom_c>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */
+			label = "TA4-GPIO-E";
+			linux,code = <KEY_E>;
+			pinctrl-0 = <&pinctrl_dhcom_e>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */
+			pinctrl-0 = <&pinctrl_dhcom_d>;
+			pinctrl-names = "default";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			pinctrl-0 = <&pinctrl_dhcom_f>;
+			pinctrl-names = "default";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */
+			pinctrl-0 = <&pinctrl_dhcom_g>;
+			pinctrl-names = "default";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+
+	reg_avdd: regulator-avdd {	/* AUDIO_VDD */
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "AUDIO_VDD";
+	};
+};
+
+&i2c5 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9540";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cmuxed0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			typec@3d {
+				compatible = "nxp,ptn5150";
+				reg = <0x3d>;
+				interrupt-parent = <&gpio4>;
+				interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ptn5150>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						ptn5150_in_ep: endpoint {
+							remote-endpoint = <&usb_c_0_ss_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						ptn5150_out_ep: endpoint {
+							remote-endpoint = <&dwc3_0_ss_ep>;
+						};
+					};
+				};
+			};
+
+			power-sensor@40 {
+			    compatible = "ti,ina238";
+			    reg = <0x40>;
+			    shunt-resistor = <20000>;	/* 0.02 R */
+			    ti,shunt-gain = <1>;	/* Drop cca. 40mV */
+			};
+
+			eeprom_board: eeprom@54 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x54>;
+			};
+		};
+
+		i2cmuxed1: i2c@1 {	/* HDMI DDC I2C */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&ethphy0g {
+	reg = <7>;
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
+	phy-handle = <&ethphypdk>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		ethphypdk: ethernet-phy@7 { /* Micrel KSZ9131RNXI */
+			compatible = "ethernet-phy-id0022.1642",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reg = <7>;
+			reset-assert-us = <1000>;
+			/* RESET_N signal rise time ~100ms */
+			reset-deassert-us = <120000>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&clk_pcie>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&pcie {
+	fsl,max-link-speed = <3>;
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	usb-role-switch;
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dwc3_0_hs_ep: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usb_c_0_hs_ep>;
+		};
+
+		dwc3_0_ss_ep: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ptn5150_out_ep>;
+		};
+	};
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+};
+
+&usb_dwc3_1 {
+	/* This port has USB5734 Hub connected to it, PWR/OC pins are unused */
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
+&iomuxc {
+	/*
+	 * GPIO_A,B,C,E are connected to buttons.
+	 * GPIO_D,F,G,I are connected to LEDs.
+	 * GPIO_H is connected to USB Hub RESET_N.
+	 * GPIO_M is connected to CLKOUT2.
+	 */
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k
+		     &pinctrl_dhcom_l
+		     &pinctrl_dhcom_int>;
+
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x40000000
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 9cdd4234c4ca..7e804f650784 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -83,7 +83,7 @@
 
 &eqos {	/* First ethernet */
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
 	phy-handle = <&ethphy0g>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -94,14 +94,14 @@
 		#size-cells = <0>;
 
 		/* Up to one of these two PHYs may be populated. */
-		ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+		ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio3>;
 			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;
 			pinctrl-names = "default";
-			reg = <1>;
+			reg = <0>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
 			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
@@ -129,9 +129,9 @@
 
 &fec {	/* Second ethernet */
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-0 = <&pinctrl_fec_rmii>;
 	phy-handle = <&ethphy1f>;
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 	fsl,magic-packet;
 	status = "okay";
 
@@ -547,7 +547,7 @@
 		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
 		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
 		     &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
-		     /* GPIO_M is connected to CLKOUT2 */
+		     /* GPIO_M is connected to CLKOUT1 */
 		     &pinctrl_dhcom_int>;
 	pinctrl-names = "default";
 
@@ -673,7 +673,7 @@
 		>;
 	};
 
-	pinctrl_eqos: dhcom-eqos-grp {	/* RGMII */
+	pinctrl_eqos_rgmii: dhcom-eqos-rgmii-grp {	/* RGMII */
 		fsl,pins = <
 			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
 			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
@@ -692,6 +692,22 @@
 		>;
 	};
 
+	pinctrl_eqos_rmii: dhcom-eqos-rmii-grp {	/* RMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER		0x1f
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			/* Clock */
+			MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK	0x4000001f
+		>;
+	};
+
 	pinctrl_enet_vio: dhcom-enet-vio-grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x22
@@ -700,9 +716,9 @@
 
 	pinctrl_ethphy0: dhcom-ethphy0-grp {
 		fsl,pins = <
-			/* ENET1_#RST Reset */
+			/* ENET_QOS_#RST Reset */
 			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x22
-			/* ENET1_#INT Interrupt */
+			/* ENET_QOS_#INT Interrupt */
 			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x22
 		>;
 	};
@@ -716,7 +732,7 @@
 		>;
 	};
 
-	pinctrl_fec: dhcom-fec-grp {
+	pinctrl_fec_rgmii: dhcom-fec-rgmii-grp {	/* RGMII */
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK		0x1f
 			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
@@ -737,6 +753,22 @@
 		>;
 	};
 
+	pinctrl_fec_rmii: dhcom-fec-rmii-grp {	/* RMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER		0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			/* Clock */
+			MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK		0x4000001f
+		>;
+	};
+
 	pinctrl_flexcan1: dhcom-flexcan1-grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 3fa6cca9a043..d8fb29e7e148 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -80,12 +80,14 @@
 			label = "S12";
 			linux,code = <BTN_0>;
 			gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		switch-2 {
 			label = "S13";
 			linux,code = <BTN_1>;
 			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index 80db1ad7c230..56b0e4b865c9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -67,7 +67,14 @@
 	/* TODO: Audio Codec */
 };
 
-/* TODO: Verdin PCIE_1 */
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
 
 /* Verdin PWM_1 */
 &pwm1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
index 361426c0da0a..bdfdd4c782f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -10,7 +10,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_ETH";
@@ -91,7 +91,14 @@
 	/* TODO: Audio Codec */
 };
 
-/* TODO: Verdin PCIE_1 */
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
 
 /* Verdin PWM_1 */
 &pwm1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
index 36289c175e6e..ef94f9a57e20 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
@@ -65,6 +65,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_bt_uart>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "mrvl,88w8997";
+		max-speed = <921600>;
+	};
 };
 
 /* On-module Wi-Fi */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
index bd7b31cc3760..db1722f0d80e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
@@ -87,7 +87,7 @@
 	status = "okay";
 };
 
-/* EEPROM on Verdin yavia board */
+/* EEPROM on Verdin Yavia board */
 &eeprom_carrier_board {
 	status = "okay";
 };
@@ -122,7 +122,7 @@
 	status = "okay";
 };
 
-&pcie_phy{
+&pcie_phy {
 	status = "okay";
 };
 
@@ -183,7 +183,6 @@
 };
 
 &usb_dwc3_1 {
-	disable-over-current;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 0dd6180a8e39..e9e4fcb562f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -87,7 +87,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
 		regulator-always-on;
@@ -128,7 +128,7 @@
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
@@ -748,7 +748,20 @@
 	};
 };
 
-/* TODO: Verdin PCIE_1 */
+/* Verdin PCIE_1 */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	/* PCIE_1_RESET# (SODIMM 244) */
+	reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
 
 /* Verdin PWM_1 */
 &pwm1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index a19224fe1a6a..f81391993354 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -409,6 +409,30 @@
 				status = "disabled";
 			};
 
+			gpt1: timer@302d0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT1_ROOT>, <&clk IMX8MP_CLK_GPT1>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@302e0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT2_ROOT>, <&clk IMX8MP_CLK_GPT2>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt3: timer@302f0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT3_ROOT>, <&clk IMX8MP_CLK_GPT3>;
+				clock-names = "ipg", "per";
+			};
+
 			iomuxc: pinctrl@30330000 {
 				compatible = "fsl,imx8mp-iomuxc";
 				reg = <0x30330000 0x10000>;
@@ -722,6 +746,30 @@
 				clocks = <&osc_24m>;
 				clock-names = "per";
 			};
+
+			gpt6: timer@306e0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x306e0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT6_ROOT>, <&clk IMX8MP_CLK_GPT6>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt5: timer@306f0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x306f0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT5_ROOT>, <&clk IMX8MP_CLK_GPT5>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt4: timer@30700000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x30700000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT4_ROOT>, <&clk IMX8MP_CLK_GPT4>;
+				clock-names = "ipg", "per";
+			};
 		};
 
 		aips3: bus@30800000 {
@@ -1126,13 +1174,68 @@
 			#size-cells = <1>;
 			ranges;
 
+			mipi_dsi: dsi@32e60000 {
+				compatible = "fsl,imx8mp-mipi-dsim";
+				reg = <0x32e60000 0x400>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_APB>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_CLK_24M>;
+				assigned-clock-rates = <200000000>, <24000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_DSI_1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif1: endpoint {
+							remote-endpoint = <&lcdif1_to_dsim>;
+						};
+					};
+				};
+			};
+
+			lcdif1: display-controller@32e80000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32e80000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+						  <&clk IMX8MP_CLK_MEDIA_AXI>,
+						  <&clk IMX8MP_CLK_MEDIA_APB>;
+				assigned-clock-parents = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
+							 <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>;
+				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>;
+				status = "disabled";
+
+				port {
+					lcdif1_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif1>;
+					};
+				};
+			};
+
 			lcdif2: display-controller@32e90000 {
 				compatible = "fsl,imx8mp-lcdif";
-				reg = <0x32e90000 0x238>;
+				reg = <0x32e90000 0x10000>;
 				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
-					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
-					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
 				clock-names = "pix", "axi", "disp_axi";
 				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
 						  <&clk IMX8MP_VIDEO_PLL1>;
@@ -1151,7 +1254,7 @@
 
 			media_blk_ctrl: blk-ctrl@32ec0000 {
 				compatible = "fsl,imx8mp-media-blk-ctrl",
-					     "simple-bus", "syscon";
+					     "syscon";
 				reg = <0x32ec0000 0x10000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -1202,10 +1305,10 @@
 
 				lvds_bridge: bridge@5c {
 					compatible = "fsl,imx8mp-ldb";
-					clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
-					clock-names = "ldb";
 					reg = <0x5c 0x4>, <0x128 0x4>;
 					reg-names = "ldb", "lvds";
+					clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					clock-names = "ldb";
 					assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
 					assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
 					status = "disabled";
@@ -1309,6 +1412,32 @@
 			status = "disabled";
 		};
 
+		pcie_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mp-pcie-ep";
+			reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
+			reg-names = "dbi", "addr_space";
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_HSIO_AXI>,
+				 <&clk IMX8MP_CLK_PCIE_ROOT>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+			assigned-clock-rates = <10000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */
+			interrupt-names = "dma";
+			fsl,max-link-speed = <3>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+			resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
+		};
+
 		gpu3d: gpu@38000000 {
 			compatible = "vivante,gc";
 			reg = <0x38000000 0x8000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 7605802f294d..ce7ce2ba855c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -667,7 +667,7 @@
 		>;
 	};
 
-	pinctrl_spkamp: spkamp {
+	pinctrl_spkamp: spkampgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3		0x81  /* MUTE */
 		>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
index 73bd431cbd6a..2b3d437a642a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
@@ -12,18 +12,16 @@
 	compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq";
 };
 
-&bq25895 {
-	ti,battery-regulation-voltage = <4192000>; /* uV */
-	ti,charge-current = <1600000>; /* uA */
-	ti,termination-current = <66000>;  /* uA */
-};
-
 &accel_gyro {
 	mount-matrix =  "1",  "0",  "0",
 			"0", "-1",  "0",
 			"0",  "0",  "1";
 };
 
+&bq25895 {
+	ti,charge-current = <1600000>; /* uA */
+};
+
 &proximity {
-	proximity-near-level = <120>;
+	proximity-near-level = <50>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
index 4533a84fb0b9..077c5cd2586f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -7,7 +7,7 @@
 
 &a53_opp_table {
 	opp-1000000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <950000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
index e4f8b47cce4f..7fd0176e4bd3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
@@ -22,9 +22,7 @@
 };
 
 &bq25895 {
-	ti,battery-regulation-voltage = <4200000>; /* uV */
 	ti,charge-current = <1500000>; /* uA */
-	ti,termination-current = <144000>;  /* uA */
 };
 
 &camera_front {
@@ -40,6 +38,12 @@
 	};
 };
 
+&magnetometer {
+	mount-matrix =  "1",  "0",  "0",
+			"0", "-1",  "0",
+			"0",  "0", "-1";
+};
+
 &proximity {
-	proximity-near-level = <25>;
+	proximity-near-level = <10>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
index 1056b7981bdb..97577c0a7715 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
@@ -23,5 +23,5 @@
 };
 
 &proximity {
-	proximity-near-level = <10>;
+	proximity-near-level = <5>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 6895bcc12165..38732579d13e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -20,6 +20,8 @@
 	backlight_dsi: backlight-dsi {
 		compatible = "led-backlight";
 		leds = <&led_backlight>;
+		brightness-levels = <255>;
+		default-brightness-level = <190>;
 	};
 
 	pmic_osc: clock-pmic {
@@ -84,13 +86,21 @@
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_audiopwr>;
-		regulator-name = "AUDIO_PWR_EN";
+		regulator-name = "AUD_1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
+	reg_mic_2v4: regulator-mic-2v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "MIC_2V4";
+		regulator-min-microvolt = <2400000>;
+		regulator-max-microvolt = <2400000>;
+		vin-supply = <&reg_aud_1v8>;
+	};
+
 	/*
 	 * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC
 	 * since we can't have it twice in the 2 different regulator nodes.
@@ -319,6 +329,10 @@
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
+		opp-166000000 {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
@@ -371,6 +385,16 @@
 };
 
 &iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* CLKO2 for cameras on both CSI1 and CSI2 */
+			MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
+		>;
+	};
+
 	pinctrl_audiopwr: audiopwrgrp {
 		fsl,pins = <
 			/* AUDIO_POWER_EN_3V3 */
@@ -662,7 +686,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
 			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
@@ -679,7 +703,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
 			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
@@ -709,7 +733,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
 			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x8d
@@ -722,7 +746,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
 			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f
@@ -758,7 +782,7 @@
 };
 
 &i2c1 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -806,6 +830,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>;
 		clocks = <&pmic_osc>;
+		#clock-cells = <0>;
 		clock-names = "osc";
 		clock-output-names = "pmic_clk";
 		interrupt-parent = <&gpio1>;
@@ -819,9 +844,9 @@
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
 				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <900000>;
-				rohm,dvs-idle-voltage = <850000>;
-				rohm,dvs-suspend-voltage = <800000>;
+				rohm,dvs-run-voltage = <880000>;
+				rohm,dvs-idle-voltage = <820000>;
+				rohm,dvs-suspend-voltage = <810000>;
 				regulator-always-on;
 			};
 
@@ -831,8 +856,8 @@
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
 				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <1000000>;
-				rohm,dvs-idle-voltage = <900000>;
+				rohm,dvs-run-voltage = <950000>;
+				rohm,dvs-idle-voltage = <850000>;
 				regulator-always-on;
 			};
 
@@ -841,14 +866,14 @@
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
-				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-run-voltage = <850000>;
 			};
 
 			buck4_reg: BUCK4 {
 				regulator-name = "buck4";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
-				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-run-voltage = <930000>;
 			};
 
 			buck5_reg: BUCK5 {
@@ -956,12 +981,12 @@
 };
 
 &i2c2 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	magnetometer@1e	{
+	magnetometer: magnetometer@1e	{
 		compatible = "st,lsm9ds1-magn";
 		reg = <0x1e>;
 		pinctrl-names = "default";
@@ -1005,7 +1030,7 @@
 };
 
 &i2c3 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
@@ -1023,7 +1048,7 @@
 		DBVDD-supply = <&reg_aud_1v8>;
 		AVDD-supply = <&reg_aud_1v8>;
 		CPVDD-supply = <&reg_aud_1v8>;
-		MICVDD-supply = <&reg_aud_1v8>;
+		MICVDD-supply = <&reg_mic_2v4>;
 		PLLVDD-supply = <&reg_aud_1v8>;
 		SPKVDD1-supply = <&reg_vsys_3v4>;
 		SPKVDD2-supply = <&reg_vsys_3v4>;
@@ -1095,7 +1120,7 @@
 };
 
 &i2c4 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
@@ -1127,7 +1152,9 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 		phys = <&usb3_phy0>;
-		ti,precharge-current = <130000>; /* uA */
+		ti,battery-regulation-voltage = <4208000>; /* uV */
+		ti,termination-current = <128000>;  /* uA */
+		ti,precharge-current = <128000>; /* uA */
 		ti,minimum-sys-voltage = <3700000>; /* uV */
 		ti,boost-voltage = <5000000>; /* uV */
 		ti,boost-max-current = <1500000>; /* uA */
@@ -1143,6 +1170,7 @@
 };
 
 &mipi_csi1 {
+	assigned-clock-rates = <266000000>, <200000000>, <66000000>;
 	status = "okay";
 
 	ports {
@@ -1299,7 +1327,6 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	dr_mode = "otg";
-	snps,dis_u3_susphy_quirk;
 	usb-role-switch;
 	status = "okay";
 
@@ -1366,7 +1393,7 @@
 	mmc-pwrseq = <&usdhc2_pwrseq>;
 	post-power-on-delay-ms = <1000>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-	max-frequency = <50000000>;
+	max-frequency = <100000000>;
 	disable-wp;
 	cap-sdio-irq;
 	keep-power-in-suspend;
@@ -1380,3 +1407,13 @@
 	fsl,ext-reset-output;
 	status = "okay";
 };
+
+&a53_opp_table {
+	opp-1000000000 {
+		opp-microvolt = <850000>;
+	};
+
+	opp-1500000000 {
+		opp-microvolt = <950000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
index 344cfdaeb1d5..c5244b608524 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -169,8 +169,6 @@
 	hnp-disable;
 	srp-disable;
 	adp-disable;
-	/* OC not supported due to non matching active polarity */
-	disable-over-current;
 	dr_mode = "otg";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 98fbba4c99a9..0492556a10db 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -940,6 +940,8 @@
 				clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
 				         <&clk IMX8MQ_CLK_UART1_ROOT>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -951,6 +953,8 @@
 				clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
 				         <&clk IMX8MQ_CLK_UART3_ROOT>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -962,6 +966,8 @@
 				clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
 				         <&clk IMX8MQ_CLK_UART2_ROOT>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1157,6 +1163,8 @@
 				clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
 				         <&clk IMX8MQ_CLK_UART4_ROOT>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1445,7 +1453,6 @@
 			phys = <&usb3_phy0>, <&usb3_phy0>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg1>;
-			usb3-resume-missing-cas;
 			status = "disabled";
 		};
 
@@ -1477,7 +1484,6 @@
 			phys = <&usb3_phy1>, <&usb3_phy1>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg2>;
-			usb3-resume-missing-cas;
 			status = "disabled";
 		};
 
@@ -1605,6 +1611,38 @@
 			status = "disabled";
 		};
 
+		pcie1_ep: pcie-ep@33c00000 {
+			compatible = "fsl,imx8mq-pcie-ep";
+			reg = <0x33c00000 0x000400000>,
+			      <0x20000000 0x08000000>;
+			reg-names = "dbi", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			fsl,max-link-speed = <2>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+					  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+					  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+						 <&clk IMX8MQ_SYS2_PLL_100M>,
+						 <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+					       <10000000>;
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,	/* GIC Dist */
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
new file mode 100644
index 000000000000..5ab0921eb599
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board";
+	compatible = "toradex,apalis-imx8-eval",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
new file mode 100644
index 000000000000..68ce58dc7102
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-ixora-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Ixora V1.1 Carrier Board";
+	compatible = "toradex,apalis-imx8-ixora-v1.1",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
new file mode 100644
index 000000000000..c8ff75831556
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-imx8-v1.1-eval",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
new file mode 100644
index 000000000000..ad7f644968fa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-ixora-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.1 Carrier Board";
+	compatible = "toradex,apalis-imx8-v1.1-ixora-v1.1",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
new file mode 100644
index 000000000000..3b2e8c93b846
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-ixora-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.2 Carrier Board";
+	compatible = "toradex,apalis-imx8-v1.1-ixora-v1.2",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
new file mode 100644
index 000000000000..81ba8b2831ac
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8qm.dtsi"
+#include "imx8-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1";
+	compatible = "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
+
+/* TODO: Cooling Maps */
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
new file mode 100644
index 000000000000..1c6af9f549a8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "imx8qm-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM";
+	compatible = "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
+
+&ethphy0 {
+	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+};
+
+/*
+ * Apalis iMX8QM V1.0 has PHY KSZ9031. the Micrel PHY driver
+ * doesn't support setting internal PHY delay for TXC line for
+ * this PHY model. Use delay on MAC side instead.
+ */
+&fec1 {
+	fsl,rgmii_txc_dly;
+	phy-mode = "rgmii-rxid";
+};
+
+/* TODO: Apalis HDMI1 */
+
+/* Apalis I2C2 (DDC) */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_135",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_275",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_124",
+			  "MXM3_122",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "",
+			  "",
+			  "MXM3_4",
+			  "MXM3_211",
+			  "MXM3_209",
+			  "MXM3_2",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_112",
+			  "MXM3_118",
+			  "MXM3_114",
+			  "MXM3_116";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_286",
+			  "",
+			  "MXM3_87",
+			  "MXM3_99",
+			  "MXM3_138",
+			  "MXM3_140",
+			  "MXM3_239",
+			  "",
+			  "MXM3_281",
+			  "MXM3_283",
+			  "MXM3_126",
+			  "MXM3_132",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_173",
+			  "MXM3_175",
+			  "MXM3_123";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_198",
+			  "MXM3_35",
+			  "MXM3_164",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_217",
+			  "MXM3_215",
+			  "",
+			  "",
+			  "MXM3_193",
+			  "MXM3_194",
+			  "MXM3_37",
+			  "",
+			  "MXM3_271",
+			  "MXM3_273",
+			  "MXM3_195",
+			  "MXM3_197",
+			  "MXM3_177",
+			  "MXM3_179",
+			  "MXM3_181",
+			  "MXM3_183",
+			  "MXM3_185",
+			  "MXM3_187";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "MXM3_191",
+			  "",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_200",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_204",
+			  "MXM3_196",
+			  "",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "MXM3_305",
+			  "MXM3_307",
+			  "MXM3_309",
+			  "MXM3_311",
+			  "MXM3_315",
+			  "MXM3_317",
+			  "MXM3_319",
+			  "MXM3_321",
+			  "MXM3_15/GPIO7",
+			  "MXM3_63",
+			  "MXM3_17/GPIO8",
+			  "MXM3_12",
+			  "MXM3_14",
+			  "MXM3_16";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "MXM3_18",
+			  "MXM3_11/GPIO5",
+			  "MXM3_13/GPIO6",
+			  "MXM3_274",
+			  "MXM3_84",
+			  "MXM3_262",
+			  "MXM3_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "",
+			  "",
+			  "",
+			  "MXM3_269",
+			  "MXM3_251",
+			  "MXM3_253",
+			  "MXM3_295",
+			  "MXM3_299",
+			  "MXM3_301",
+			  "MXM3_297",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287";
+
+	/* Enable pcie root / sata ref clock unconditionally */
+	pcie-sata-hog {
+		gpios = <27 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_150",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_144",
+			  "MXM3_146",
+			  "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_159",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_186",
+			  "MXM3_188",
+			  "MXM3_176",
+			  "MXM3_178";
+};
+
+&lsio_gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_261",
+			  "MXM3_263",
+			  "MXM3_259",
+			  "MXM3_257",
+			  "MXM3_255",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_265",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_243";
+};
+
+&pinctrl_fec1 {
+	fsl,pins =
+		/* Use pads in 1.8V mode */
+		<IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+		<IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020>,
+		<IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO				0x06000020>,
+		<IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL		0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL		0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3			0x06000020>,
+		<IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M	0x06000020>,
+		/* On-module ETH_RESET# */
+		<IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x06000020>,
+		/* On-module ETH_INT# */
+		<IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05				0x04000060>;
+};
+
+&pinctrl_fec1_sleep {
+	fsl,pins =
+		<IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+		<IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14				0x04000040>,
+		<IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13				0x04000040>,
+		<IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30				0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04				0x04000040>,
+		<IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09			0x04000040>,
+		<IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15			0x04000040>,
+		<IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x04000040>,
+		<IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05				0x04000040>;
+};
+
+&iomuxc {
+	/* Apalis I2C2 (DDC) */
+	pinctrl_lpi2c0: lpi2c0grp {
+		fsl,pins =
+			<IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL			0x04000022>,
+			<IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA			0x04000022>;
+	};
+};
+
+/* On-module PCIe_CTRL0_CLKREQ */
+&pinctrl_pcie_sata_refclk {
+	fsl,pins =
+		<IMX8QM_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27			0x00000021>;
+};
+
+/* TODO: On-module Wi-Fi */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	/*
+	 * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates
+	 * issues with certain SD cards, disable 1.8V signaling for now.
+	 */
+	no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	/*
+	 * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates
+	 * issues with certain SD cards, disable 1.8V signaling for now.
+	 */
+	no-1-8-v;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index bbe5f5ecfb92..e9b198c13b2f 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -16,6 +16,50 @@
 				     "uart4_lpcg_ipg_clk";
 		power-domains = <&pd IMX_SC_R_UART_4>;
 	};
+
+	can1_lpcg: clock-controller@5ace0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ace0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can1_lpcg_pe_clk",
+				     "can1_lpcg_ipg_clk",
+				     "can1_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_1>;
+	};
+
+	can2_lpcg: clock-controller@5acf0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5acf0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can2_lpcg_pe_clk",
+				     "can2_lpcg_ipg_clk",
+				     "can2_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_2>;
+	};
+};
+
+&flexcan1 {
+	fsl,clk-source = /bits/ 8 <1>;
+};
+
+&flexcan2 {
+	clocks = <&can1_lpcg 1>,
+		 <&can1_lpcg 0>;
+	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
+	fsl,clk-source = /bits/ 8 <1>;
+};
+
+&flexcan3 {
+	clocks = <&can2_lpcg 1>,
+		 <&can2_lpcg 0>;
+	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
+	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &lpuart0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 41ce8336f29e..9fff867709f0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -23,6 +23,9 @@
 		serial1 = &lpuart1;
 		serial2 = &lpuart2;
 		serial3 = &lpuart3;
+		vpu_core0 = &vpu_core0;
+		vpu_core1 = &vpu_core1;
+		vpu_core2 = &vpu_core2;
 	};
 
 	cpus {
@@ -212,6 +215,7 @@
 	};
 
 	/* sorted in register address */
+	#include "imx8-ss-vpu.dtsi"
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-dma.dtsi"
 	#include "imx8-ss-conn.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts
new file mode 100644
index 000000000000..966ecfb2a17e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Aster Board";
+	compatible = "toradex,colibri-imx8x-aster",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts
index 6b21a295c126..fe4597a6f7e0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2019 Toradex
  */
@@ -6,10 +6,10 @@
 /dts-v1/;
 
 #include "imx8qxp-colibri.dtsi"
-#include "imx8qxp-colibri-eval-v3.dtsi"
+#include "imx8x-colibri-eval-v3.dtsi"
 
 / {
-	model = "Toradex Colibri iMX8QXP/DX on Colibri Evaluation Board V3";
+	model = "Toradex Colibri iMX8QXP on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx8x-eval-v3",
 		     "toradex,colibri-imx8x", "fsl,imx8qxp";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
deleted file mode 100644
index 7c334b93db3b..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2019 Toradex
- */
-
-#include <dt-bindings/input/linux-event-codes.h>
-
-/ {
-	aliases {
-		rtc0 = &rtc_i2c;
-		rtc1 = &rtc;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		key-wakeup {
-			label = "Wake-Up";
-			gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/* Colibri UART_B */
-&lpuart0 {
-	status = "okay";
-};
-
-/* Colibri UART_C */
-&lpuart2 {
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&lpuart3 {
-	status = "okay";
-};
-
-/* Colibri FastEthernet */
-&fec1 {
-	status = "okay";
-};
-
-/* Colibri SD/MMC Card */
-&usdhc2 {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts
new file mode 100644
index 000000000000..cca33213fa9b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Colibri Iris V2 Board";
+	compatible = "toradex,colibri-imx8x-iris-v2",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts
new file mode 100644
index 000000000000..fed75b5d4a1c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Colibri Iris Board";
+	compatible = "toradex,colibri-imx8x-iris",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
index 89d70e030433..0f1aa31dd3e5 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
@@ -1,598 +1,12 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2019 Toradex
  */
 
 #include "imx8qxp.dtsi"
+#include "imx8x-colibri.dtsi"
 
 / {
-	model = "Toradex Colibri iMX8QXP/DX Module";
+	model = "Toradex Colibri iMX8QXP Module";
 	compatible = "toradex,colibri-imx8x", "fsl,imx8qxp";
-
-	chosen {
-		stdout-path = &lpuart3;
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-/* On-module I2C */
-&i2c0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>;
-	status = "okay";
-
-	/* Touch controller */
-	touchscreen@2c {
-		compatible = "adi,ad7879-1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ad7879_int>;
-		reg = <0x2c>;
-		interrupt-parent = <&lsio_gpio3>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-max-pressure = <4096>;
-		adi,resistance-plate-x = <120>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
-	};
-};
-
-/* Colibri I2C */
-&i2c1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-};
-
-/* Colibri UART_B */
-&lpuart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart0>;
-};
-
-/* Colibri UART_C */
-&lpuart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart2>;
-};
-
-/* Colibri UART_A */
-&lpuart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>;
-};
-
-/* Colibri FastEthernet */
-&fec1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_fec1>;
-	pinctrl-1 = <&pinctrl_fec1_sleep>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@2 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			max-speed = <100>;
-			reg = <2>;
-		};
-	};
-};
-
-/* On-module eMMC */
-&usdhc1 {
-	bus-width = <8>;
-	non-removable;
-	no-sd;
-	no-sdio;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	status = "okay";
-};
-
-/* Colibri SD/MMC Card */
-&usdhc2 {
-	bus-width = <4>;
-	cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_module_3v3>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
-	disable-wp;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>;
-
-	/* On-module touch pen-down interrupt */
-	pinctrl_ad7879_int: ad7879intgrp {
-		fsl,pins = <
-			IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05	0x21
-		>;
-	};
-
-	/* Colibri Analogue Inputs */
-	pinctrl_adc0: adc0grp {
-		fsl,pins = <
-			IMX8QXP_ADC_IN0_ADMA_ADC_IN0			0x60		/* SODIMM   8 */
-			IMX8QXP_ADC_IN1_ADMA_ADC_IN1			0x60		/* SODIMM   6 */
-			IMX8QXP_ADC_IN4_ADMA_ADC_IN4			0x60		/* SODIMM   4 */
-			IMX8QXP_ADC_IN5_ADMA_ADC_IN5			0x60		/* SODIMM   2 */
-		>;
-	};
-
-	pinctrl_can_int: canintgrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13		0x40		/* SODIMM  73 */
-		>;
-	};
-
-	pinctrl_csi_ctl: csictlgrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14		0x20		/* SODIMM  77 */
-			IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15		0x20		/* SODIMM  89 */
-		>;
-	};
-
-	pinctrl_ext_io0: extio0grp {
-		fsl,pins = <
-			IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08	0x06000040	/* SODIMM 135 */
-		>;
-	};
-
-	/* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */
-	pinctrl_fec1: fec1grp {
-		fsl,pins = <
-			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
-			IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
-			IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x61
-			IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT		0x06000061
-			IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x61
-			IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x61
-			IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x61
-			IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x61
-			IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x61
-			IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER		0x61
-		>;
-	};
-
-	pinctrl_fec1_sleep: fec1slpgrp {
-		fsl,pins = <
-			IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11		0x06000041
-			IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10		0x06000041
-			IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30	0x41
-			IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29		0x41
-			IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31	0x41
-			IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00	0x41
-			IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04	0x41
-			IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05	0x41
-			IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06	0x41
-			IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07	0x41
-		>;
-	};
-
-	/* Colibri optional CAN on UART_B RTS/CTS */
-	pinctrl_flexcan1: flexcan0grp {
-		fsl,pins = <
-			IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX		0x21		/* SODIMM  32 */
-			IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX		0x21		/* SODIMM  34 */
-		>;
-	};
-
-	/* Colibri optional CAN on PS2 */
-	pinctrl_flexcan2: flexcan1grp {
-		fsl,pins = <
-			IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX		0x21		/* SODIMM  55 */
-			IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX		0x21		/* SODIMM  63 */
-		>;
-	};
-
-	/* Colibri optional CAN on UART_A TXD/RXD */
-	pinctrl_flexcan3: flexcan2grp {
-		fsl,pins = <
-			IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX		0x21		/* SODIMM  35 */
-			IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX		0x21		/* SODIMM  33 */
-		>;
-	};
-
-	/* Colibri LCD Back-Light GPIO */
-	pinctrl_gpio_bl_on: gpioblongrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12		0x60		/* SODIMM  71 */
-		>;
-	};
-
-	pinctrl_gpiokeys: gpiokeysgrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10		0x06700041	/* SODIMM  45 */
-		>;
-	};
-
-	pinctrl_hog0: hog0grp {
-		fsl,pins = <
-			IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02	0x06000020	/* SODIMM  65 */
-			IMX8QXP_CSI_D07_CI_PI_D09			0x61		/* SODIMM  65 */
-			IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11		0x20		/* SODIMM  69 */
-			IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26		0x20		/* SODIMM  79 */
-			IMX8QXP_CSI_D02_CI_PI_D04			0x61		/* SODIMM  79 */
-			IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03		0x06000020	/* SODIMM  85 */
-			IMX8QXP_CSI_D06_CI_PI_D08			0x61		/* SODIMM  85 */
-			IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17		0x20		/* SODIMM  95 */
-			IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x20		/* SODIMM  97 */
-			IMX8QXP_CSI_D03_CI_PI_D05			0x61		/* SODIMM  97 */
-			IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18		0x20		/* SODIMM  99 */
-			IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28		0x20		/* SODIMM 101 */
-			IMX8QXP_CSI_D00_CI_PI_D02			0x61		/* SODIMM 101 */
-			IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25		0x20		/* SODIMM 103 */
-			IMX8QXP_CSI_D01_CI_PI_D03			0x61		/* SODIMM 103 */
-			IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19		0x20		/* SODIMM 105 */
-			IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20		0x20		/* SODIMM 107 */
-			IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05		0x20		/* SODIMM 127 */
-			IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06		0x20		/* SODIMM 131 */
-			IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04		0x20		/* SODIMM 133 */
-			IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00		0x20		/* SODIMM  96 */
-			IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21		0x20		/* SODIMM  98 */
-			IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31		0x20		/* SODIMM 100 */
-			IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22		0x20		/* SODIMM 102 */
-			IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23		0x20		/* SODIMM 104 */
-			IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24		0x20		/* SODIMM 106 */
-		>;
-	};
-
-	pinctrl_hog1: hog1grp {
-		fsl,pins = <
-			IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01		0x20		/* SODIMM  75 */
-			IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16		0x20		/* SODIMM  93 */
-		>;
-	};
-
-	/*
-	 * This pin is used in the SCFW as a UART. Using it from
-	 * Linux would require rewritting the SCFW board file.
-	 */
-	pinctrl_hog_scfw: hogscfwgrp {
-		fsl,pins = <
-			IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03		0x20		/* SODIMM 144 */
-		>;
-	};
-
-	/* On Module I2C */
-	pinctrl_i2c0: i2c0grp {
-		fsl,pins = <
-			IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL	0x06000021
-			IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA	0x06000021
-		>;
-	};
-
-	/* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */
-	pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp {
-		fsl,pins = <
-			IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0xc6000020	/* SODIMM 140 */
-			IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0xc6000020	/* SODIMM 142 */
-		>;
-	};
-
-	/* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */
-	pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp {
-		fsl,pins = <
-			IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL	0xc6000020	/* SODIMM 186 */
-			IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA	0xc6000020	/* SODIMM 188 */
-		>;
-	};
-
-	/* Colibri I2C */
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL	0x06000021	/* SODIMM 196 */
-			IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA	0x06000021	/* SODIMM 194 */
-		>;
-	};
-
-	/* Colibri Parallel RGB LCD Interface */
-	pinctrl_lcdif: lcdifgrp {
-		fsl,pins = <
-			IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK		0x60		/* SODIMM  56 */
-			IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC		0x60		/* SODIMM  68 */
-			IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC		0x60		/* SODIMM  82 */
-			IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN			0x60		/* SODIMM  44 */
-			IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19		0x60		/* SODIMM  44 */
-			IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00		0x60		/* SODIMM  76 */
-			IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x60		/* SODIMM  76 */
-			IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01		0x60		/* SODIMM  70 */
-			IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02		0x60		/* SODIMM  60 */
-			IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03		0x60		/* SODIMM  58 */
-			IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04		0x60		/* SODIMM  78 */
-			IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05		0x60		/* SODIMM  72 */
-			IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06		0x60		/* SODIMM  80 */
-			IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07		0x60		/* SODIMM  46 */
-			IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08		0x60		/* SODIMM  62 */
-			IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09		0x60		/* SODIMM  48 */
-			IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10		0x60		/* SODIMM  74 */
-			IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11		0x60		/* SODIMM  50 */
-			IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12		0x60		/* SODIMM  52 */
-			IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13			0x60		/* SODIMM  54 */
-			IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14			0x60		/* SODIMM  66 */
-			IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15			0x60		/* SODIMM  64 */
-			IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16			0x60		/* SODIMM  57 */
-			IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01	0x60		/* SODIMM  57 */
-			IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17		0x60		/* SODIMM  61 */
-		>;
-	};
-
-	/* Colibri SPI */
-	pinctrl_lpspi2: lpspi2grp {
-		fsl,pins = <
-			IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00		0x21		/* SODIMM  86 */
-			IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO			0x06000040	/* SODIMM  92 */
-			IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI			0x06000040	/* SODIMM  90 */
-			IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK			0x06000040	/* SODIMM  88 */
-		>;
-	};
-
-	/* Colibri UART_B */
-	pinctrl_lpuart0: lpuart0grp {
-		fsl,pins = <
-			IMX8QXP_UART0_RX_ADMA_UART0_RX			0x06000020	/* SODIMM  36 */
-			IMX8QXP_UART0_TX_ADMA_UART0_TX			0x06000020	/* SODIMM  38 */
-			IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B		0x06000020	/* SODIMM  34 */
-			IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B		0x06000020	/* SODIMM  32 */
-		>;
-	};
-
-	/* Colibri UART_C */
-	pinctrl_lpuart2: lpuart2grp {
-		fsl,pins = <
-			IMX8QXP_UART2_RX_ADMA_UART2_RX			0x06000020	/* SODIMM  19 */
-			IMX8QXP_UART2_TX_ADMA_UART2_TX			0x06000020	/* SODIMM  21 */
-		>;
-	};
-
-	/* Colibri UART_A */
-	pinctrl_lpuart3: lpuart3grp {
-		fsl,pins = <
-			IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX		0x06000020	/* SODIMM  33 */
-			IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX		0x06000020	/* SODIMM  35 */
-		>;
-	};
-
-	/* Colibri UART_A Control */
-	pinctrl_lpuart3_ctrl: lpuart3ctrlgrp {
-		fsl,pins = <
-			IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x20		/* SODIMM  23 */
-			IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29		0x20		/* SODIMM  25 */
-			IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30		0x20		/* SODIMM  27 */
-			IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03		0x20		/* SODIMM  29 */
-			IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x20		/* SODIMM  31 */
-			IMX8QXP_CSI_EN_LSIO_GPIO3_IO02			0x20		/* SODIMM  37 */
-		>;
-	};
-
-	/* On module wifi module */
-	pinctrl_pcieb: pciebgrp {
-		fsl,pins = <
-			IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x04000061	/* SODIMM 178 */
-			IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000061	/* SODIMM  94 */
-			IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x60		/* SODIMM  81 */
-		>;
-	};
-
-	/* Colibri PWM_A */
-	pinctrl_pwm_a: pwmagrp {
-	/* both pins are connected together, reserve the unused CSI_D05 */
-		fsl,pins = <
-			IMX8QXP_CSI_D05_CI_PI_D07			0x61		/* SODIMM  59 */
-			IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT		0x60		/* SODIMM  59 */
-		>;
-	};
-
-	/* Colibri PWM_B */
-	pinctrl_pwm_b: pwmbgrp {
-		fsl,pins = <
-			IMX8QXP_UART1_TX_LSIO_PWM0_OUT			0x60		/* SODIMM  28 */
-		>;
-	};
-
-	/* Colibri PWM_C */
-	pinctrl_pwm_c: pwmcgrp {
-		fsl,pins = <
-			IMX8QXP_UART1_RX_LSIO_PWM1_OUT			0x60		/* SODIMM  30 */
-		>;
-	};
-
-	/* Colibri PWM_D */
-	pinctrl_pwm_d: pwmdgrp {
-	/* both pins are connected together, reserve the unused CSI_D04 */
-		fsl,pins = <
-			IMX8QXP_CSI_D04_CI_PI_D06			0x61		/* SODIMM  67 */
-			IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT		0x60		/* SODIMM  67 */
-		>;
-	};
-
-	/* On-module I2S */
-	pinctrl_sai0: sai0grp {
-		fsl,pins = <
-			IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD			0x06000040
-			IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD			0x06000040
-			IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC			0x06000040
-			IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS			0x06000040
-		>;
-	};
-
-	/* Colibri Audio Analogue Microphone GND */
-	pinctrl_sgtl5000: sgtl5000grp {
-		fsl,pins = <
-			/* MIC GND EN */
-			IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06	0x41
-		>;
-	};
-
-	/* On-module SGTL5000 clock */
-	pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp {
-		fsl,pins = <
-			IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0		0x21
-		>;
-	};
-
-	/* On-module USB interrupt */
-	pinctrl_usb3503a: usb3503agrp {
-		fsl,pins = <
-			IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04	0x61
-		>;
-	};
-
-	/* Colibri USB Client Cable Detect */
-	pinctrl_usbc_det: usbcdetgrp {
-		fsl,pins = <
-			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09	0x06000040	/* SODIMM 137 */
-		>;
-	};
-
-	/* USB Host Power Enable */
-	pinctrl_usbh1_reg: usbh1reggrp {
-		fsl,pins = <
-			IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03		0x06000040	/* SODIMM 129 */
-		>;
-	};
-
-	/* On-module eMMC */
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
-			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x21
-			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21
-			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21
-			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21
-			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21
-			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21
-			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21
-			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21
-			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21
-			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41
-			IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x21
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-		fsl,pins = <
-			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
-			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x21
-			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21
-			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21
-			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21
-			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21
-			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21
-			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21
-			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21
-			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21
-			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41
-			IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x21
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-		fsl,pins = <
-			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
-			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x21
-			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21
-			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21
-			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21
-			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21
-			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21
-			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21
-			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21
-			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21
-			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41
-			IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x21
-		>;
-	};
-
-	/* Colibri SD/MMC Card Detect */
-	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x06000021	/* SODIMM  43 */
-		>;
-	};
-
-	pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x60		/* SODIMM  43 */
-		>;
-	};
-
-	/* Colibri SD/MMC Card */
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041	/* SODIMM  47 */
-			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x21		/* SODIMM 190 */
-			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21		/* SODIMM 192 */
-			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21		/* SODIMM  49 */
-			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21		/* SODIMM  51 */
-			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21		/* SODIMM  53 */
-			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x21
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041	/* SODIMM  47 */
-			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x21		/* SODIMM 190 */
-			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21		/* SODIMM 192 */
-			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21		/* SODIMM  49 */
-			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21		/* SODIMM  51 */
-			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21		/* SODIMM  53 */
-			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x21
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041	/* SODIMM  47 */
-			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x21		/* SODIMM 190 */
-			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21		/* SODIMM 192 */
-			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21		/* SODIMM  49 */
-			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21		/* SODIMM  51 */
-			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21		/* SODIMM  53 */
-			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x21
-		>;
-	};
-
-	pinctrl_usdhc2_sleep: usdhc2slpgrp {
-		fsl,pins = <
-			IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23		0x60		/* SODIMM  47 */
-			IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24		0x60		/* SODIMM 190 */
-			IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25		0x60		/* SODIMM 192 */
-			IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26		0x60		/* SODIMM  49 */
-			IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27		0x60		/* SODIMM  51 */
-			IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28		0x60		/* SODIMM  53 */
-			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x21
-		>;
-	};
-
-	pinctrl_wifi: wifigrp {
-		fsl,pins = <
-			IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x20
-		>;
-	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index afa883389456..7924b0969ad8 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "imx8qxp.dtsi"
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "Freescale i.MX8QXP MEK";
@@ -28,6 +29,21 @@
 		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	gpio-sbu-mux {
+		compatible = "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec_mux>;
+		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
 };
 
 &dsp {
@@ -127,6 +143,42 @@
 			};
 		};
 	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		reg = <0x50>;
+		interrupt-parent = <&lsio_gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			typec_dr_sw: endpoint {
+				remote-endpoint = <&usb3_drd_sw>;
+			};
+		};
+
+		usb_con1: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+
 };
 
 &lpuart0 {
@@ -148,7 +200,7 @@
 };
 
 &thermal_zones {
-	pmic-thermal0 {
+	pmic-thermal {
 		polling-delay-passive = <250>;
 		polling-delay = <2000>;
 		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
@@ -204,6 +256,27 @@
 	status = "okay";
 };
 
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+
 &vpu {
 	compatible = "nxp,imx8qxp-vpu";
 	status = "okay";
@@ -267,6 +340,18 @@
 		>;
 	};
 
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
+		>;
+	};
+
+	pinctrl_typec_mux: typecmuxgrp {
+		fsl,pins = <
+			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09           0x60
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
new file mode 100644
index 000000000000..aab655931cde
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+/* Colibri Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog0>;
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>,
+		   <&lsio_gpio5 2 GPIO_ACTIVE_LOW>;
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status= "okay";
+};
+
+/* Colibri SDCard */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
new file mode 100644
index 000000000000..7264d784ae72
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	/* fixed crystal dedicated to mcp25xx */
+	clk16m: clock-16mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+};
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	status = "okay";
+
+	mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_can_int>;
+		pinctrl-names = "default";
+		clocks = <&clk16m>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status = "okay";
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
new file mode 100644
index 000000000000..98202a437040
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		enable-active-high;
+		gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds_converter &pinctrl_gpio_iris>;
+
+	pinctrl_enable_3v3_vmmc: enable_3v3_vmmc {
+		fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31	0x20>;	/* SODIMM 100 */
+	};
+
+	pinctrl_lvds_converter: lcd-lvds {
+		fsl,pins = <IMX8QXP_FLEXCAN1_TX_LSIO_GPIO1_IO18		0x20>,	/* SODIMM  55 */
+			   /* 6B/8B mode. Select LOW - 8B mode (24bit) */
+			   <IMX8QXP_FLEXCAN1_RX_LSIO_GPIO1_IO17		0x20>,	/* SODIMM  63 */
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17		0x20>,	/* SODIMM  95 */
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18	0x20>;	/* SODIMM  99 */
+	};
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	cap-power-off-card;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
new file mode 100644
index 000000000000..5f30c88855e7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V";
+	};
+};
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri I2C */
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_iris>;
+
+	pinctrl_gpio_iris: gpioirisgrp {
+		fsl,pins = <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21	0x20>,		/* SODIMM  98 */
+			   <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04		0x20>,		/* SODIMM 133 */
+			   <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25		0x20>,		/* SODIMM 103 */
+			   <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28		0x20>,		/* SODIMM 101 */
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x20>,		/* SODIMM  97 */
+			   <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03	0x06000020>,	/* SODIMM  85 */
+			   <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26		0x20>,		/* SODIMM  79 */
+			   <IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10	0x06700041>;	/* SODIMM  45 */
+	};
+
+	pinctrl_uart1_forceoff: uart1forceoffgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14	0x20>;	/* SODIMM 22 */
+	};
+
+	pinctrl_uart23_forceoff: uart23forceoffgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x20>; /* SODIMM 23 */
+	};
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status= "okay";
+};
+
+&lsio_gpio3 {
+	/*
+	 * This turns the LVDS transceiver on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled
+	 * in userspace.
+	 */
+	lvds-tx-on-hog {
+		gpio-hog;
+		gpios = <18 0>;
+		output-high;
+	};
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
new file mode 100644
index 000000000000..7cad79102e1a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -0,0 +1,776 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = &lpuart3;
+	};
+
+	colibri_gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		status = "disabled";
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+/* TODO Analogue Inputs */
+
+/* TODO Cooling maps for DX */
+
+&cpu_alert0 {
+	hysteresis = <2000>;
+	temperature = <90000>;
+	type = "passive";
+};
+
+&cpu_crit0 {
+	hysteresis = <2000>;
+	temperature = <105000>;
+	type = "critical";
+};
+
+/* TODO flexcan1 - 3 */
+
+/* TODO GPU */
+
+/* On-module I2C */
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>;
+	status = "okay";
+
+	/* Touch controller */
+	touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ad7879_int>;
+		reg = <0x2c>;
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
+	};
+};
+
+/* TODO i2c lvds0 accessible on FFC (X2) */
+
+/* TODO i2c lvds1 accessible on FFC (X3) */
+
+/* Colibri I2C */
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+/* TODO Parallel RRB */
+
+/* Colibri UART_B */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>;
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <2>;
+		};
+	};
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2>;
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_68",
+			  "",
+			  "",
+			  "SODIMM_82",
+			  "SODIMM_56",
+			  "SODIMM_28",
+			  "SODIMM_30",
+			  "",
+			  "SODIMM_61",
+			  "SODIMM_103",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_100";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90",
+			  "SODIMM_88",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "SODIMM_6",
+			  "SODIMM_8",
+			  "",
+			  "",
+			  "SODIMM_2",
+			  "SODIMM_4",
+			  "SODIMM_34",
+			  "SODIMM_32",
+			  "SODIMM_63",
+			  "SODIMM_55",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_21",
+			  "SODIMM_19",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_196",
+			  "SODIMM_194",
+			  "SODIMM_186",
+			  "SODIMM_188",
+			  "SODIMM_138";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "SODIMM_23",
+			  "",
+			  "",
+			  "SODIMM_144";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "SODIMM_96",
+			  "SODIMM_75",
+			  "SODIMM_37",
+			  "SODIMM_29",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_69",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_77",
+			  "SODIMM_89",
+			  "SODIMM_93",
+			  "SODIMM_95",
+			  "SODIMM_99",
+			  "SODIMM_105",
+			  "SODIMM_107",
+			  "SODIMM_98",
+			  "SODIMM_102",
+			  "SODIMM_104",
+			  "SODIMM_106";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "SODIMM_129",
+			  "SODIMM_133",
+			  "SODIMM_127",
+			  "SODIMM_131",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_44",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_31",
+			  "SODIMM_47",
+			  "SODIMM_190",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "SODIMM_57",
+			  "SODIMM_65",
+			  "SODIMM_85",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_135",
+			  "SODIMM_137",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184";
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_b>;
+	pinctrl-names = "default";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_c>;
+	pinctrl-names = "default";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_d>;
+	pinctrl-names = "default";
+};
+
+/* TODO MIPI CSI */
+
+/* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */
+
+/* TODO on-module PCIe for Wi-Fi */
+
+/* TODO On-module i2s / Audio */
+
+/* On-module eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_module_3v3>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	disable-wp;
+	no-1-8-v;
+};
+
+/* TODO USB Client/Host */
+
+/* TODO USB Host */
+
+/* TODO VPU Encoder/Decoder */
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
+		    <&pinctrl_hog2>, <&pinctrl_lpspi2_cs2>;
+
+	/* On-module touch pen-down interrupt */
+	pinctrl_ad7879_int: ad7879intgrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05	0x21>;
+	};
+
+	/* Colibri Analogue Inputs */
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0			0x60>,		/* SODIMM   8 */
+			   <IMX8QXP_ADC_IN1_ADMA_ADC_IN1			0x60>,		/* SODIMM   6 */
+			   <IMX8QXP_ADC_IN4_ADMA_ADC_IN4			0x60>,		/* SODIMM   4 */
+			   <IMX8QXP_ADC_IN5_ADMA_ADC_IN5			0x60>;		/* SODIMM   2 */
+	};
+
+	/* Atmel MXT touchsceen + Capacitive Touch Adapter */
+	/* NOTE: This pingroup conflicts with pingroups
+	 * pinctrl_pwm_b/pinctrl_pwm_c. Don't enable them
+	 * simultaneously.
+	 */
+	pinctrl_atmel_adap: atmeladaptergrp {
+		fsl,pins = <IMX8QXP_UART1_RX_LSIO_GPIO0_IO22			0x21>,		/* SODIMM  30 */
+			   <IMX8QXP_UART1_TX_LSIO_GPIO0_IO21			0x4000021>;	/* SODIMM  28 */
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	pinctrl_atmel_conn: atmelconnectorgrp {
+		fsl,pins = <IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20		0x4000021>,	/* SODIMM 107 */
+			   <IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24		0x21>;		/* SODIMM 106 */
+	};
+
+	pinctrl_can_int: canintgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13			0x40>;		/* SODIMM  73 */
+	};
+
+	pinctrl_csi_ctl: csictlgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14		0x20>,		/* SODIMM  77 */
+			   <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15		0x20>;		/* SODIMM  89 */
+	};
+
+	pinctrl_csi_mclk: csimclkgrp {
+		fsl,pins = <IMX8QXP_CSI_MCLK_CI_PI_MCLK				0xC0000041>;	/* SODIMM  75 / X3-12 */
+	};
+
+	pinctrl_ext_io0: extio0grp {
+		fsl,pins = <IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08		0x06000040>;	/* SODIMM 135 */
+	};
+
+	/* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x61>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT	0x06000061>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x61>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER	0x61>;
+	};
+
+	pinctrl_fec1_sleep: fec1slpgrp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07		0x41>;
+	};
+
+	/* Colibri optional CAN on UART_B RTS/CTS */
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX		0x21>,		/* SODIMM  32 */
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX		0x21>;		/* SODIMM  34 */
+	};
+
+	/* Colibri optional CAN on PS2 */
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX		0x21>,		/* SODIMM  55 */
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX		0x21>;		/* SODIMM  63 */
+	};
+
+	/* Colibri optional CAN on UART_A TXD/RXD */
+	pinctrl_flexcan3: flexcan2grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX		0x21>,		/* SODIMM  35 */
+			   <IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX		0x21>;		/* SODIMM  33 */
+	};
+
+	/* Colibri LCD Back-Light GPIO */
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12		0x60>;		/* SODIMM  71 */
+	};
+
+	/* HDMI Hot Plug Detect on FFC (X2) */
+	pinctrl_gpio_hpd: gpiohpdgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31		0x20>;		/* SODIMM 138 */
+	};
+
+	pinctrl_gpiokeys: gpiokeysgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10		0x06700041>;	/* SODIMM  45 */
+	};
+
+	pinctrl_hog0: hog0grp {
+		fsl,pins = <IMX8QXP_CSI_D07_CI_PI_D09				0x61>,		/* SODIMM  65 */
+			   <IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11		0x20>,		/* SODIMM  69 */
+			   <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26			0x20>,		/* SODIMM  79 */
+			   <IMX8QXP_CSI_D02_CI_PI_D04				0x61>,		/* SODIMM  79 */
+			   <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03		0x06000020>,	/* SODIMM  85 */
+			   <IMX8QXP_CSI_D06_CI_PI_D08				0x61>,		/* SODIMM  85 */
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17			0x20>,		/* SODIMM  95 */
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27			0x20>,		/* SODIMM  97 */
+			   <IMX8QXP_CSI_D03_CI_PI_D05				0x61>,		/* SODIMM  97 */
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18		0x20>,		/* SODIMM  99 */
+			   <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28			0x20>,		/* SODIMM 101 */
+			   <IMX8QXP_CSI_D00_CI_PI_D02				0x61>,		/* SODIMM 101 */
+			   <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25			0x20>,		/* SODIMM 103 */
+			   <IMX8QXP_CSI_D01_CI_PI_D03				0x61>,		/* SODIMM 103 */
+			   <IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19		0x20>,		/* SODIMM 105 */
+			   <IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05			0x20>,		/* SODIMM 127 */
+			   <IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06			0x20>,		/* SODIMM 131 */
+			   <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04			0x20>,		/* SODIMM 133 */
+			   <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00			0x20>,		/* SODIMM  96 */
+			   <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21		0x20>,		/* SODIMM  98 */
+			   <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31			0x20>,		/* SODIMM 100 */
+			   <IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22			0x20>,		/* SODIMM 102 */
+			   <IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23		0x20>;		/* SODIMM 104 */
+	};
+
+	pinctrl_hog1: hog1grp {
+		fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01			0x20>,		/* SODIMM  75 */
+			   <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16			0x20>;		/* SODIMM  93 */
+	};
+
+	pinctrl_hog2: hog2grp {
+		fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01			0x20>;		/* SODIMM  75 */
+	};
+
+	/*
+	 * This pin is used in the SCFW as a UART. Using it from
+	 * Linux would require rewritting the SCFW board file.
+	 */
+	pinctrl_hog_scfw: hogscfwgrp {
+		fsl,pins = <IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03		0x20>;		/* SODIMM 144 */
+	};
+
+	/* On Module I2C */
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL		0x06000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA		0x06000021>;
+	};
+
+	/* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */
+	pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0xc6000020>,	/* SODIMM 140 */
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0xc6000020>;	/* SODIMM 142 */
+	};
+
+	/* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */
+	pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL	0xc6000020>,	/* SODIMM 186 */
+			   <IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA	0xc6000020>;	/* SODIMM 188 */
+	};
+
+	/* Colibri I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL		0x06000021>,	/* SODIMM 196 */
+			   <IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA		0x06000021>;	/* SODIMM 194 */
+	};
+
+	/* Colibri Parallel RGB LCD Interface */
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK			0x60>,		/* SODIMM  56 */
+			   <IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC			0x60>,		/* SODIMM  68 */
+			   <IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC			0x60>,		/* SODIMM  82 */
+			   <IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN			0x40>,		/* SODIMM  44 */
+			   <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19		0x40>,		/* SODIMM  44 */
+			   <IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00			0x60>,		/* SODIMM  76 */
+			   <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21			0x60>,		/* SODIMM  76 */
+			   <IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01			0x60>,		/* SODIMM  70 */
+			   <IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02			0x60>,		/* SODIMM  60 */
+			   <IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03			0x60>,		/* SODIMM  58 */
+			   <IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04			0x60>,		/* SODIMM  78 */
+			   <IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05			0x60>,		/* SODIMM  72 */
+			   <IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06		0x60>,		/* SODIMM  80 */
+			   <IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07		0x60>,		/* SODIMM  46 */
+			   <IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08		0x60>,		/* SODIMM  62 */
+			   <IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09		0x60>,		/* SODIMM  48 */
+			   <IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10			0x60>,		/* SODIMM  74 */
+			   <IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11			0x60>,		/* SODIMM  50 */
+			   <IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12		0x60>,		/* SODIMM  52 */
+			   <IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13			0x60>,		/* SODIMM  54 */
+			   <IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14			0x60>,		/* SODIMM  66 */
+			   <IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15			0x60>,		/* SODIMM  64 */
+			   <IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16			0x60>,		/* SODIMM  57 */
+			   <IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01		0x60>,		/* SODIMM  57 */
+			   <IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17			0x60>;		/* SODIMM  61 */
+	};
+
+	/* Colibri SPI */
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00			0x21>,		/* SODIMM  86 */
+			   <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO			0x06000040>,	/* SODIMM  92 */
+			   <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI			0x06000040>,	/* SODIMM  90 */
+			   <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK			0x06000040>;	/* SODIMM  88 */
+	};
+
+	pinctrl_lpspi2_cs2: lpspi2cs2grp {
+		fsl,pins = <IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02		0x21>;		/* SODIMM  65 */
+	};
+
+	/* Colibri UART_B */
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_UART0_RX			0x06000020>,	/* SODIMM  36 */
+			   <IMX8QXP_UART0_TX_ADMA_UART0_TX			0x06000020>,	/* SODIMM  38 */
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B		0x06000020>,	/* SODIMM  34 */
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B		0x06000020>;	/* SODIMM  32 */
+	};
+
+	/* Colibri UART_C */
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <IMX8QXP_UART2_RX_ADMA_UART2_RX			0x06000020>,	/* SODIMM  19 */
+			   <IMX8QXP_UART2_TX_ADMA_UART2_TX			0x06000020>;	/* SODIMM  21 */
+	};
+
+	/* Colibri UART_A */
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX			0x06000020>,	/* SODIMM  33 */
+			   <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX			0x06000020>;	/* SODIMM  35 */
+	};
+
+	/* Colibri UART_A Control */
+	pinctrl_lpuart3_ctrl: lpuart3ctrlgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00		0x20>,		/* SODIMM  23 */
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29			0x20>,		/* SODIMM  25 */
+			   <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30			0x20>,		/* SODIMM  27 */
+			   <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03			0x20>,		/* SODIMM  29 */
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22			0x20>,		/* SODIMM  31 */
+			   <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02			0x20>;		/* SODIMM  37 */
+	};
+
+	/* On module wifi module */
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01		0x04000061>,	/* SODIMM 178 */
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02		0x04000061>,	/* SODIMM  94 */
+			   <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00		0x60>;		/* SODIMM  81 */
+	};
+
+	/* Colibri PWM_A */
+	pinctrl_pwm_a: pwmagrp {
+	/* both pins are connected together, reserve the unused CSI_D05 */
+		fsl,pins = <IMX8QXP_CSI_D05_CI_PI_D07				0x61>,		/* SODIMM  59 */
+			   <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT			0x60>;		/* SODIMM  59 */
+	};
+
+	/* Colibri PWM_B */
+	pinctrl_pwm_b: pwmbgrp {
+		fsl,pins = <IMX8QXP_UART1_TX_LSIO_PWM0_OUT			0x60>;		/* SODIMM  28 */
+	};
+
+	/* Colibri PWM_C */
+	pinctrl_pwm_c: pwmcgrp {
+		fsl,pins = <IMX8QXP_UART1_RX_LSIO_PWM1_OUT			0x60>;		/* SODIMM  30 */
+	};
+
+	/* Colibri PWM_D */
+	pinctrl_pwm_d: pwmdgrp {
+	/* both pins are connected together, reserve the unused CSI_D04 */
+		fsl,pins = <IMX8QXP_CSI_D04_CI_PI_D06				0x61>,		/* SODIMM  67 */
+			   <IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT			0x60>;		/* SODIMM  67 */
+	};
+
+	/* On-module I2S */
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD			0x06000040>,
+			   <IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD			0x06000040>,
+			   <IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC			0x06000040>,
+			   <IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS			0x06000040>;
+	};
+
+	/* Colibri Audio Analogue Microphone GND */
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06		0x41>;
+	};
+
+	/* On-module SGTL5000 clock */
+	pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp {
+		fsl,pins = <IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0			0x21>;
+	};
+
+	/* On-module USB interrupt */
+	pinctrl_usb3503a: usb3503agrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04		0x61>;
+	};
+
+	/* Colibri USB Client Cable Detect */
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09	0x06000040>;	/* SODIMM 137 */
+	};
+
+	/* USB Host Power Enable */
+	pinctrl_usbh1_reg: usbh1reggrp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03			0x06000040>;	/* SODIMM 129 */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	/* Colibri SD/MMC Card Detect */
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x06000021>;	/* SODIMM  43 */
+	};
+
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x60>;		/* SODIMM  43 */
+	};
+
+	/* Colibri SD/MMC Card */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23			0x60>,		/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24			0x60>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25		0x60>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26		0x60>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27		0x60>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28		0x60>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x20>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 2076f9c9983a..e8d49660ac85 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -153,6 +153,14 @@
 				nxp,no-divider;
 			};
 
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM1_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			tpm2: pwm@44320000 {
 				compatible = "fsl,imx7ulp-pwm";
 				reg = <0x44320000 0x10000>;
@@ -164,6 +172,8 @@
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
@@ -174,6 +184,8 @@
 			lpi2c2: i2c@44350000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
@@ -243,6 +255,22 @@
 				status = "okay";
 			};
 
+			bbnsm: bbnsm@44440000 {
+				compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+				reg = <0x44440000 0x10000>;
+
+				bbnsm_rtc: rtc {
+					compatible = "nxp,imx93-bbnsm-rtc";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				bbnsm_pwrkey: pwrkey {
+					compatible = "nxp,imx93-bbnsm-pwrkey";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+					linux,code = <KEY_POWER>;
+				};
+			};
+
 			clk: clock-controller@44450000 {
 				compatible = "fsl,imx93-ccm";
 				reg = <0x44450000 0x10000>;
@@ -316,6 +344,14 @@
 				status = "disabled";
 			};
 
+			tpm3: pwm@424e0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424e0000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM3_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			tpm4: pwm@424f0000 {
 				compatible = "fsl,imx7ulp-pwm";
 				reg = <0x424f0000 0x10000>;
@@ -343,6 +379,8 @@
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -353,6 +391,8 @@
 			lpi2c4: i2c@42540000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -434,6 +474,21 @@
 				status = "disabled";
 			};
 
+			flexspi1: spi@425e0000 {
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
+					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				status = "disabled";
+			};
+
 			lpuart7: serial@42690000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42690000 0x1000>;
@@ -455,6 +510,8 @@
 			lpi2c5: i2c@426b0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -465,6 +522,8 @@
 			lpi2c6: i2c@426c0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -475,6 +534,8 @@
 			lpi2c7: i2c@426d0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -485,6 +546,8 @@
 			lpi2c8: i2c@426e0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -580,9 +643,9 @@
 			eqos: ethernet@428a0000 {
 				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
 				reg = <0x428a0000 0x10000>;
-				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "eth_wake_irq", "macirq";
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
 				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
 					 <&clk IMX93_CLK_ENET_QOS_GATE>,
 					 <&clk IMX93_CLK_ENET_TIMER2>,
@@ -595,7 +658,7 @@
 							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
 				assigned-clock-rates = <100000000>, <250000000>;
 				intf_mode = <&wakeupmix_gpr 0x28>;
-				clk_csr = <0>;
+				snps,clk-csr = <0>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 058237681fe5..79ac09b58a89 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-gl-mv1000.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
new file mode 100644
index 000000000000..b1b45b4fa9d4
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "GL.iNet GL-MV1000";
+	compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios-states = <0>;
+		states = <1800000 0x1
+			3300000 0x0>;
+		enable-active-high;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		switch {
+			label = "switch";
+			linux,code = <BTN_0>;
+			gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		vpn {
+			label = "green:vpn";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "green:wan";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power: power {
+			label = "green:power";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0 0xf0000>;
+			};
+
+			partition@f0000 {
+				label = "u-boot-env";
+				reg = <0xf0000 0x8000>;
+			};
+
+			factory: partition@f8000 {
+				label = "factory";
+				reg = <0xf8000 0x8000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "dtb";
+				reg = <0x100000 0x10000>;
+				read-only;
+			};
+
+			partition@110000 {
+				label = "rescue";
+				reg = <0x110000 0x1000000>;
+			};
+		};
+	};
+};
+
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	no-1-8-v;
+	vqmmc-supply = <&vcc_sd_reg1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+
+				nvmem-cells = <&macaddr_factory_6>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+
+				nvmem-cells = <&macaddr_factory_6>;
+				nvmem-cell-names = "mac-address";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	nvmem-cells = <&macaddr_factory_0>;
+	nvmem-cell-names = "mac-address";
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+
+	macaddr_factory_6: macaddr@6 {
+		reg = <0x6 0x6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 7ca71f2d7afb..39ce6e25a8ef 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -455,4 +455,5 @@
 	phys = <&cp0_comphy5 2>;
 	phy-names = "cp0-pcie2-x1-phy";
 	reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 4e6d29ad32eb..2c920e22cec2 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -317,7 +317,7 @@
 	 * first one that will have a critical trip point will be chosen.
 	 */
 	thermal-zones {
-		ap_thermal_ic: ap-thermal-ic {
+		ap_thermal_ic: ap-ic-thermal {
 			polling-delay-passive = <0>; /* Interrupt driven */
 			polling-delay = <0>; /* Interrupt driven */
 
@@ -334,7 +334,7 @@
 			cooling-maps { };
 		};
 
-		ap_thermal_cpu0: ap-thermal-cpu0 {
+		ap_thermal_cpu0: ap-cpu0-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -367,7 +367,7 @@
 			};
 		};
 
-		ap_thermal_cpu1: ap-thermal-cpu1 {
+		ap_thermal_cpu1: ap-cpu1-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -400,7 +400,7 @@
 			};
 		};
 
-		ap_thermal_cpu2: ap-thermal-cpu2 {
+		ap_thermal_cpu2: ap-cpu2-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -433,7 +433,7 @@
 			};
 		};
 
-		ap_thermal_cpu3: ap-thermal-cpu3 {
+		ap_thermal_cpu3: ap-cpu3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
index 8107d120a8a7..2f9ab6b4a2c9 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
@@ -54,7 +54,7 @@
 				      <0x00d0000 0x1000>,	/* GICH */
 				      <0x00e0000 0x2000>;	/* GICV */
 
-				gic_its_ap0: interrupt-controller@3040000 {
+				gic_its_ap0: msi-controller@3040000 {
 					compatible = "arm,gic-v3-its";
 					msi-controller;
 					#msi-cells = <1>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 7d0043824f2a..0cc9ee9871e7 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -25,7 +25,7 @@
 	 * The cooling maps are empty as there are no cooling devices.
 	 */
 	thermal-zones {
-		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
+		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) {
 			polling-delay-passive = <0>; /* Interrupt driven */
 			polling-delay = <0>; /* Interrupt driven */
 
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 8e4ec243fb8f..32cfb3e2efc3 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -282,8 +282,9 @@
 
 			port@a {
 				reg = <10>;
-				label = "cpu";
 				ethernet = <&cp0_eth0>;
+				phy-mode = "10gbase-r";
+				managed = "in-band-status";
 			};
 
 		};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index d5cd7b3e09cf..c99c3372a4b5 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -52,4 +52,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 879dff24dcd3..ed1a9d319415 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -559,7 +559,7 @@
 		status = "disabled";
 	};
 
-	nandc: nfi@1100e000 {
+	nandc: nand-controller@1100e000 {
 		compatible = "mediatek,mt2712-nfc";
 		reg = <0 0x1100e000 0 0x1000>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6357.dtsi b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
new file mode 100644
index 000000000000..3330a03c2f74
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Copyright (c) 2023 BayLibre Inc.
+ */
+
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+	mt6357_pmic: pmic {
+		compatible = "mediatek,mt6357";
+
+		regulators {
+			mt6357_vproc_reg: buck-vproc {
+				regulator-name = "vproc";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vcore_reg: buck-vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vmodem_reg: buck-vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+			};
+
+			mt6357_vs1_reg: buck-vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vpa_reg: buck-vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-ramp-delay = <50000>;
+				regulator-enable-ramp-delay = <220>;
+			};
+
+			mt6357_vfe28_reg: ldo-vfe28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vxo22_reg: ldo-vxo22 {
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2400000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vrf18_reg: ldo-vrf18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vrf12_reg: ldo-vrf12 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vefuse_reg: ldo-vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn33_bt_reg: ldo-vcn33-bt {
+				regulator-name = "vcn33-bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn33_wifi_reg: ldo-vcn33-wifi {
+				regulator-name = "vcn33-wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn28_reg: ldo-vcn28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn18_reg: ldo-vcn18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcama_reg: ldo-vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcamd_reg: ldo-vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcamio_reg: ldo-vcamio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vldo28_reg: ldo-vldo28 {
+				regulator-name = "vldo28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vsram_others_reg: ldo-vsram-others {
+				regulator-name = "vsram-others";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+			};
+
+			mt6357_vsram_proc_reg: ldo-vsram-proc {
+				regulator-name = "vsram-proc";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+			};
+
+			mt6357_vaux18_reg: ldo-vaux18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vaud28_reg: ldo-vaud28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vio28_reg: ldo-vio28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vio18_reg: ldo-vio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+			};
+
+			mt6357_vdram_reg: ldo-vdram {
+				regulator-name = "vdram";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <3300>;
+			};
+
+			mt6357_vmc_reg: ldo-vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vmch_reg: ldo-vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vemc_reg: ldo-vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+				regulator-always-on;
+			};
+
+			mt6357_vsim1_reg: ldo-vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vsim2_reg: ldo-vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vibr_reg: ldo-vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vusb33_reg: ldo-vusb33 {
+				regulator-name = "vusb33";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+		};
+
+		rtc {
+			compatible = "mediatek,mt6357-rtc";
+		};
+
+		keys {
+			compatible = "mediatek,mt6357-keys";
+
+			key-power {
+				linux,keycodes = <KEY_POWER>;
+				wakeup-source;
+			};
+
+			key-home {
+				linux,keycodes = <KEY_HOME>;
+				wakeup-source;
+			};
+
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
index d3415527d389..507b5b567a36 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -5,6 +5,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt6795.dtsi"
 
 / {
@@ -48,7 +49,172 @@
 	};
 };
 
+&fhctl {
+	clocks = <&apmixedsys CLK_APMIXED_MAINPLL>, <&apmixedsys CLK_APMIXED_MPLL>,
+		 <&apmixedsys CLK_APMIXED_MSDCPLL>;
+	mediatek,hopping-ssc-percent = <8>, <5>, <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	accelerometer@10 {
+		compatible = "bosch,bma255";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_pins>;
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmm150";
+		reg = <0x12>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_pins>;
+		syna,startup-delay-ms = <160>;
+		syna,reset-delay-ms = <90>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	pn547: nfc@28 {
+		compatible = "nxp,pn544-i2c";
+		reg = <0x28>;
+		interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_pins>;
+		enable-gpios = <&pio 149 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&pio 94 GPIO_ACTIVE_HIGH>;
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3310";
+		reg = <0x48>;
+		interrupts-extended = <&pio 8 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&proximity_pins>;
+	};
+};
+
 &pio {
+	nfc_pins: nfc-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
+			bias-pull-down;
+			input-enable;
+		};
+
+		pins-fw-ven {
+			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>,
+				 <PINMUX_GPIO149__FUNC_GPIO149>;
+		};
+	};
+
+	ts_pins: touchscreen-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			bias-pull-up;
+			input-enable;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO102__FUNC_GPIO102>;
+			output-high;
+		};
+	};
+
+	proximity_pins: proximity-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	accel_pins: accelerometer-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
+				 <PINMUX_GPIO46__FUNC_SCL0>;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO125__FUNC_SDA1>,
+				 <PINMUX_GPIO126__FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO43__FUNC_SDA2>,
+				 <PINMUX_GPIO44__FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SDA3>,
+				 <PINMUX_GPIO137__FUNC_SCL3>;
+			bias-disable;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO100__FUNC_SDA4>,
+				 <PINMUX_GPIO101__FUNC_SCL4>;
+			bias-disable;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins-rx {
 			pinmux = <PINMUX_GPIO113__FUNC_URXD0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index b3fc76d837a9..17019fbea0af 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mediatek,mt6795-clk.h>
 #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+#include <dt-bindings/power/mt6795-power.h>
 #include <dt-bindings/reset/mediatek,mt6795-resets.h>
 
 / {
@@ -264,6 +265,84 @@
 			#reset-cells = <1>;
 		};
 
+		scpsys: syscon@10006000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+			#power-domain-cells = <1>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt6795-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT6795_POWER_DOMAIN_VDEC {
+					reg = <MT6795_POWER_DOMAIN_VDEC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT6795_POWER_DOMAIN_VENC {
+					reg = <MT6795_POWER_DOMAIN_VENC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_VENC_SEL>;
+					clock-names = "mm", "venc";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT6795_POWER_DOMAIN_ISP {
+					reg = <MT6795_POWER_DOMAIN_ISP>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_MM {
+					reg = <MT6795_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_MJC {
+					reg = <MT6795_POWER_DOMAIN_MJC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_MJC_SEL>;
+					clock-names = "mm", "mjc";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_AUDIO {
+					reg = <MT6795_POWER_DOMAIN_AUDIO>;
+					#power-domain-cells = <0>;
+				};
+
+				mfg_async: power-domain@MT6795_POWER_DOMAIN_MFG_ASYNC {
+					reg = <MT6795_POWER_DOMAIN_MFG_ASYNC>;
+					clocks = <&clk26m>;
+					clock-names = "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT6795_POWER_DOMAIN_MFG_2D {
+						reg = <MT6795_POWER_DOMAIN_MFG_2D>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT6795_POWER_DOMAIN_MFG {
+							reg = <MT6795_POWER_DOMAIN_MFG>;
+							#power-domain-cells = <0>;
+							mediatek,infracfg = <&infracfg>;
+						};
+					};
+				};
+			};
+		};
+
 		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt6795-pinctrl";
 			reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
@@ -310,6 +389,18 @@
 			clock-names = "clk13m";
 		};
 
+		apmixedsys: syscon@10209000 {
+			compatible = "mediatek,mt6795-apmixedsys", "syscon";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		fhctl: clock-controller@10209f00 {
+			compatible = "mediatek,mt6795-fhctl";
+			reg = <0 0x10209f00 0 0x100>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@10221000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -433,6 +524,85 @@
 			status = "disabled";
 		};
 
+		pwm2: pwm@11006000 {
+			compatible = "mediatek,mt6795-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&pericfg CLK_PERI_PWM>,
+				 <&pericfg CLK_PERI_PWM1>,
+				 <&pericfg CLK_PERI_PWM2>,
+				 <&pericfg CLK_PERI_PWM3>,
+				 <&pericfg CLK_PERI_PWM4>,
+				 <&pericfg CLK_PERI_PWM5>,
+				 <&pericfg CLK_PERI_PWM6>,
+				 <&pericfg CLK_PERI_PWM7>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5", "pwm6", "pwm7";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11008000 0 0x70>, <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11009000 0 0x70>, <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11010000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11010000 0 0x70>, <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C3>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11011000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11011000 0 0x70>, <0 0x11000300 0 0x80>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C4>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		mmc0: mmc@11230000 {
 			compatible = "mediatek,mt6795-mmc";
 			reg = <0 0x11230000 0 0x1000>;
@@ -473,5 +643,17 @@
 			clock-names = "source", "hclk";
 			status = "disabled";
 		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt6795-vdecsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@18000000 {
+			compatible = "mediatek,mt6795-vencsys";
+			reg = <0 0x18000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 20129bc98e21..006cd639059f 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -539,7 +539,7 @@
 		};
 	};
 
-	nandc: nfi@1100d000 {
+	nandc: nand-controller@1100d000 {
 		compatible = "mediatek,mt7622-nfc";
 		reg = <0 0x1100D000 0 0x1000>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
index 6a54315cf650..2374c0953057 100644
--- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
@@ -124,7 +124,7 @@
 			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		mmsys: mmsys@14000000 {
+		mmsys: syscon@14000000 {
 			compatible = "mediatek,mt8167-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index d452cab28c67..d77f6af19065 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -58,7 +58,7 @@
 			gpios = <&pio 69 GPIO_ACTIVE_LOW>;
 			linux,code = <SW_LID>;
 			linux,input-type = <EV_SW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		switch-power {
@@ -66,7 +66,7 @@
 			gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
 			debounce-interval = <30>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		switch-tablet-mode {
@@ -74,7 +74,7 @@
 			gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
 			linux,code = <SW_TABLET_MODE>;
 			linux,input-type = <EV_SW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		switch-volume-down {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 52dc4a50e34d..3e3f4b1b00f0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -52,7 +52,6 @@
 
 &gpu {
 	mali-supply = <&mt6358_vgpu_reg>;
-	sram-supply = <&mt6358_vsram_gpu_reg>;
 };
 
 &i2c0 {
@@ -138,6 +137,22 @@
 	non-removable;
 };
 
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
 &pio {
 	i2c_pins_0: i2c0{
 		pins_i2c{
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index fbe14b13051a..63952c1251df 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -294,7 +294,6 @@
 
 &gpu {
 	mali-supply = <&mt6358_vgpu_reg>;
-	sram-supply = <&mt6358_vsram_gpu_reg>;
 };
 
 &i2c0 {
@@ -401,6 +400,14 @@
 	Avdd-supply = <&mt6358_vaud28_reg>;
 };
 
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
 &mt6358_vsim1_reg {
 	regulator-min-microvolt = <2700000>;
 	regulator-max-microvolt = <2700000>;
@@ -411,6 +418,14 @@
 	regulator-max-microvolt = <2700000>;
 };
 
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
 &pio {
 	aud_pins_default: audiopins {
 		pins_bus {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index a1d01639df30..526bcae7a3f8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -71,7 +71,6 @@
 
 &gpu {
 	mali-supply = <&mt6358_vgpu_reg>;
-	sram-supply = <&mt6358_vsram_gpu_reg>;
 };
 
 &i2c0 {
@@ -176,6 +175,22 @@
 	non-removable;
 };
 
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
 &pio {
 	i2c_pins_0: i2c0 {
 		pins_i2c{
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 3d1d7870a5f1..5169779d01df 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -563,82 +563,82 @@
 
 		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <625000>, <850000>;
+			opp-microvolt = <625000>;
 		};
 
 		opp-320000000 {
 			opp-hz = /bits/ 64 <320000000>;
-			opp-microvolt = <631250>, <850000>;
+			opp-microvolt = <631250>;
 		};
 
 		opp-340000000 {
 			opp-hz = /bits/ 64 <340000000>;
-			opp-microvolt = <637500>, <850000>;
+			opp-microvolt = <637500>;
 		};
 
 		opp-360000000 {
 			opp-hz = /bits/ 64 <360000000>;
-			opp-microvolt = <643750>, <850000>;
+			opp-microvolt = <643750>;
 		};
 
 		opp-380000000 {
 			opp-hz = /bits/ 64 <380000000>;
-			opp-microvolt = <650000>, <850000>;
+			opp-microvolt = <650000>;
 		};
 
 		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <656250>, <850000>;
+			opp-microvolt = <656250>;
 		};
 
 		opp-420000000 {
 			opp-hz = /bits/ 64 <420000000>;
-			opp-microvolt = <662500>, <850000>;
+			opp-microvolt = <662500>;
 		};
 
 		opp-460000000 {
 			opp-hz = /bits/ 64 <460000000>;
-			opp-microvolt = <675000>, <850000>;
+			opp-microvolt = <675000>;
 		};
 
 		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <687500>, <850000>;
+			opp-microvolt = <687500>;
 		};
 
 		opp-540000000 {
 			opp-hz = /bits/ 64 <540000000>;
-			opp-microvolt = <700000>, <850000>;
+			opp-microvolt = <700000>;
 		};
 
 		opp-580000000 {
 			opp-hz = /bits/ 64 <580000000>;
-			opp-microvolt = <712500>, <850000>;
+			opp-microvolt = <712500>;
 		};
 
 		opp-620000000 {
 			opp-hz = /bits/ 64 <620000000>;
-			opp-microvolt = <725000>, <850000>;
+			opp-microvolt = <725000>;
 		};
 
 		opp-653000000 {
 			opp-hz = /bits/ 64 <653000000>;
-			opp-microvolt = <743750>, <850000>;
+			opp-microvolt = <743750>;
 		};
 
 		opp-698000000 {
 			opp-hz = /bits/ 64 <698000000>;
-			opp-microvolt = <768750>, <868750>;
+			opp-microvolt = <768750>;
 		};
 
 		opp-743000000 {
 			opp-hz = /bits/ 64 <743000000>;
-			opp-microvolt = <793750>, <893750>;
+			opp-microvolt = <793750>;
 		};
 
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <825000>, <925000>;
+			opp-microvolt = <825000>;
 		};
 	};
 
@@ -1752,7 +1752,7 @@
 		};
 
 		gpu: gpu@13040000 {
-			compatible = "mediatek,mt8183-mali", "arm,mali-bifrost";
+			compatible = "mediatek,mt8183b-mali", "arm,mali-bifrost";
 			reg = <0 0x13040000 0 0x4000>;
 			interrupts =
 				<GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index a0d3e1f731bd..78ff8ba5718e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -1075,6 +1075,23 @@
 			#clock-cells = <1>;
 		};
 
+		gpu: gpu@13040000 {
+			compatible = "mediatek,mt8186-mali",
+				     "arm,mali-bifrost";
+			reg = <0 0x13040000 0 0x4000>;
+
+			clocks = <&mfgsys CLK_MFG_BG3D>;
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			power-domains = <&spm MT8186_POWER_DOMAIN_MFG2>,
+					<&spm MT8186_POWER_DOMAIN_MFG3>;
+			power-domain-names = "core0", "core1";
+			#cooling-cells = <2>;
+			status = "disabled";
+		};
+
 		mmsys: syscon@14000000 {
 			compatible = "mediatek,mt8186-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 9f12257ab4e7..5a440504d4f9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -275,6 +275,11 @@
 	remote-endpoint = <&anx7625_in>;
 };
 
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -380,6 +385,14 @@
 	pinctrl-0 = <&i2c7_pins>;
 };
 
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
 &mipi_tx0 {
 	status = "okay";
 };
@@ -439,6 +452,13 @@
 	regulator-always-on;
 };
 
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6315_7_vbuck1>;
+	regulator-coupled-max-spread = <10000>;
+};
+
 &mt6359_vufs_ldo_reg {
 	regulator-always-on;
 };
@@ -1400,9 +1420,11 @@
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <606250>;
-				regulator-max-microvolt = <1193750>;
+				regulator-max-microvolt = <800000>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
+				regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+				regulator-coupled-max-spread = <10000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 87b91c8feaf9..5c30caf74026 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -312,6 +312,91 @@
 		clock-frequency = <13000000>;
 	};
 
+	gpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			opp-microvolt = <606250>;
+		};
+
+		opp-399000000 {
+			opp-hz = /bits/ 64 <399000000>;
+			opp-microvolt = <618750>;
+		};
+
+		opp-440000000 {
+			opp-hz = /bits/ 64 <440000000>;
+			opp-microvolt = <631250>;
+		};
+
+		opp-482000000 {
+			opp-hz = /bits/ 64 <482000000>;
+			opp-microvolt = <643750>;
+		};
+
+		opp-523000000 {
+			opp-hz = /bits/ 64 <523000000>;
+			opp-microvolt = <656250>;
+		};
+
+		opp-564000000 {
+			opp-hz = /bits/ 64 <564000000>;
+			opp-microvolt = <668750>;
+		};
+
+		opp-605000000 {
+			opp-hz = /bits/ 64 <605000000>;
+			opp-microvolt = <681250>;
+		};
+
+		opp-647000000 {
+			opp-hz = /bits/ 64 <647000000>;
+			opp-microvolt = <693750>;
+		};
+
+		opp-688000000 {
+			opp-hz = /bits/ 64 <688000000>;
+			opp-microvolt = <706250>;
+		};
+
+		opp-724000000 {
+			opp-hz = /bits/ 64 <724000000>;
+			opp-microvolt = <725000>;
+		};
+
+		opp-748000000 {
+			opp-hz = /bits/ 64 <748000000>;
+			opp-microvolt = <737500>;
+		};
+
+		opp-772000000 {
+			opp-hz = /bits/ 64 <772000000>;
+			opp-microvolt = <750000>;
+		};
+
+		opp-795000000 {
+			opp-hz = /bits/ 64 <795000000>;
+			opp-microvolt = <762500>;
+		};
+
+		opp-819000000 {
+			opp-hz = /bits/ 64 <819000000>;
+			opp-microvolt = <775000>;
+		};
+
+		opp-843000000 {
+			opp-hz = /bits/ 64 <843000000>;
+			opp-microvolt = <787500>;
+		};
+
+		opp-866000000 {
+			opp-hz = /bits/ 64 <866000000>;
+			opp-microvolt = <800000>;
+		};
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -412,15 +497,16 @@
 					#power-domain-cells = <0>;
 				};
 
-				power-domain@MT8192_POWER_DOMAIN_MFG0 {
+				mfg0: power-domain@MT8192_POWER_DOMAIN_MFG0 {
 					reg = <MT8192_POWER_DOMAIN_MFG0>;
-					clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>;
-					clock-names = "mfg";
+					clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>,
+						 <&topckgen CLK_TOP_MFG_REF_SEL>;
+					clock-names = "mfg", "alt";
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8192_POWER_DOMAIN_MFG1 {
+					mfg1: power-domain@MT8192_POWER_DOMAIN_MFG1 {
 						reg = <MT8192_POWER_DOMAIN_MFG1>;
 						mediatek,infracfg = <&infracfg>;
 						#address-cells = <1>;
@@ -1266,6 +1352,28 @@
 			status = "disabled";
 		};
 
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8192-mali", "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+			interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&apmixedsys CLK_APMIXED_MFGPLL>;
+
+			power-domains = <&spm MT8192_POWER_DOMAIN_MFG2>,
+					<&spm MT8192_POWER_DOMAIN_MFG3>,
+					<&spm MT8192_POWER_DOMAIN_MFG4>,
+					<&spm MT8192_POWER_DOMAIN_MFG5>,
+					<&spm MT8192_POWER_DOMAIN_MFG6>;
+			power-domain-names = "core0", "core1", "core2", "core3", "core4";
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+		};
+
 		mfgcfg: clock-controller@13fbf000 {
 			compatible = "mediatek,mt8192-mfgcfg";
 			reg = <0 0x13fbf000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 56749cfe7c33..8ac80a136c37 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -22,6 +22,16 @@
 		serial0 = &uart0;
 	};
 
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 82 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		pwms = <&disp_pwm0 0 500000>;
+		power-supply = <&ppvar_sys>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -212,6 +222,13 @@
 	};
 };
 
+&disp_pwm0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pin_default>;
+};
+
 &dp_tx {
 	status = "okay";
 
@@ -238,6 +255,11 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+	mali-supply = <&mt6315_7_vbuck1>;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -648,6 +670,13 @@
 		};
 	};
 
+	disp_pwm0_pin_default: disp-pwm0-default-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
 	dptx_pin: dptx-default-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO18__FUNC_DP_TX_HPD>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 8f1264d5290b..8652f41403ae 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -14,6 +14,8 @@
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/power/mt8195-power.h>
 #include <dt-bindings/reset/mt8195-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8195";
@@ -24,6 +26,22 @@
 	aliases {
 		gce0 = &gce0;
 		gce1 = &gce1;
+		ethdr0 = &ethdr0;
+		mutex0 = &mutex;
+		mutex1 = &mutex1;
+		merge1 = &merge1;
+		merge2 = &merge2;
+		merge3 = &merge3;
+		merge4 = &merge4;
+		merge5 = &merge5;
+		vdo1-rdma0 = &vdo1_rdma0;
+		vdo1-rdma1 = &vdo1_rdma1;
+		vdo1-rdma2 = &vdo1_rdma2;
+		vdo1-rdma3 = &vdo1_rdma3;
+		vdo1-rdma4 = &vdo1_rdma4;
+		vdo1-rdma5 = &vdo1_rdma5;
+		vdo1-rdma6 = &vdo1_rdma6;
+		vdo1-rdma7 = &vdo1_rdma7;
 	};
 
 	cpus {
@@ -333,6 +351,76 @@
 		#performance-domain-cells = <1>;
 	};
 
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-390000000 {
+			opp-hz = /bits/ 64 <390000000>;
+			opp-microvolt = <625000>;
+		};
+		opp-410000000 {
+			opp-hz = /bits/ 64 <410000000>;
+			opp-microvolt = <631250>;
+		};
+		opp-431000000 {
+			opp-hz = /bits/ 64 <431000000>;
+			opp-microvolt = <631250>;
+		};
+		opp-473000000 {
+			opp-hz = /bits/ 64 <473000000>;
+			opp-microvolt = <637500>;
+		};
+		opp-515000000 {
+			opp-hz = /bits/ 64 <515000000>;
+			opp-microvolt = <637500>;
+		};
+		opp-556000000 {
+			opp-hz = /bits/ 64 <556000000>;
+			opp-microvolt = <643750>;
+		};
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <650000>;
+		};
+		opp-640000000 {
+			opp-hz = /bits/ 64 <640000000>;
+			opp-microvolt = <650000>;
+		};
+		opp-670000000 {
+			opp-hz = /bits/ 64 <670000000>;
+			opp-microvolt = <662500>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <675000>;
+		};
+		opp-730000000 {
+			opp-hz = /bits/ 64 <730000000>;
+			opp-microvolt = <687500>;
+		};
+		opp-760000000 {
+			opp-hz = /bits/ 64 <760000000>;
+			opp-microvolt = <700000>;
+		};
+		opp-790000000 {
+			opp-hz = /bits/ 64 <790000000>;
+			opp-microvolt = <712500>;
+		};
+		opp-820000000 {
+			opp-hz = /bits/ 64 <820000000>;
+			opp-microvolt = <725000>;
+		};
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <737500>;
+		};
+		opp-880000000 {
+			opp-hz = /bits/ 64 <880000000>;
+			opp-microvolt = <750000>;
+		};
+	};
+
 	pmu-a55 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupt-parent = <&gic>;
@@ -446,8 +534,9 @@
 
 					power-domain@MT8195_POWER_DOMAIN_MFG1 {
 						reg = <MT8195_POWER_DOMAIN_MFG1>;
-						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>;
-						clock-names = "mfg";
+						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
+							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
+						clock-names = "mfg", "alt";
 						mediatek,infracfg = <&infracfg_ao>;
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -1018,6 +1107,40 @@
 			status = "disabled";
 		};
 
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8195-lvts-ap";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+			#thermal-sensor-cells = <1>;
+		};
+
+		disp_pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM0>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		disp_pwm1: pwm@1100f000 {
+			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100f000 0 0x1000>;
+			interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM1>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM1>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
 		spi1: spi@11010000 {
 			compatible = "mediatek,mt8195-spi",
 				     "mediatek,mt6765-spi";
@@ -1270,6 +1393,17 @@
 			status = "disabled";
 		};
 
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8195-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+			#thermal-sensor-cells = <1>;
+		};
+
 		xhci1: usb@11290000 {
 			compatible = "mediatek,mt8195-xhci",
 				     "mediatek,mtk-xhci";
@@ -1789,18 +1923,47 @@
 			status = "disabled";
 		};
 
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8195-mali", "mediatek,mt8192-mali",
+				     "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
+			interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_MFG2>,
+					<&spm MT8195_POWER_DOMAIN_MFG3>,
+					<&spm MT8195_POWER_DOMAIN_MFG4>,
+					<&spm MT8195_POWER_DOMAIN_MFG5>,
+					<&spm MT8195_POWER_DOMAIN_MFG6>;
+			power-domain-names = "core0", "core1", "core2", "core3", "core4";
+			status = "disabled";
+		};
+
 		mfgcfg: clock-controller@13fbf000 {
 			compatible = "mediatek,mt8195-mfgcfg";
 			reg = <0 0x13fbf000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		vppsys0: clock-controller@14000000 {
-			compatible = "mediatek,mt8195-vppsys0";
+		vppsys0: syscon@14000000 {
+			compatible = "mediatek,mt8195-vppsys0", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		mutex@1400f000 {
+			compatible = "mediatek,mt8195-vpp-mutex";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xf000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MUTEX>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
 		smi_sub_common_vpp0_vpp1_2x1: smi@14010000 {
 			compatible = "mediatek,mt8195-smi-sub-common";
 			reg = <0 0x14010000 0 0x1000>;
@@ -1900,12 +2063,21 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>;
 		};
 
-		vppsys1: clock-controller@14f00000 {
-			compatible = "mediatek,mt8195-vppsys1";
+		vppsys1: syscon@14f00000 {
+			compatible = "mediatek,mt8195-vppsys1", "syscon";
 			reg = <0 0x14f00000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		mutex@14f01000 {
+			compatible = "mediatek,mt8195-vpp-mutex";
+			reg = <0 0x14f01000 0 0x1000>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_DISP_MUTEX>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
 		larb5: larb@14f02000 {
 			compatible = "mediatek,mt8195-smi-larb";
 			reg = <0 0x14f02000 0 0x1000>;
@@ -2557,7 +2729,10 @@
 		vdosys1: syscon@1c100000 {
 			compatible = "mediatek,mt8195-vdosys1", "syscon";
 			reg = <0 0x1c100000 0 0x1000>;
+			mboxes = <&gce0 1 CMDQ_THR_PRIO_4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x0000 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		smi_common_vdo: smi@1c01b000 {
@@ -2586,6 +2761,17 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 		};
 
+		mutex1: mutex@1c101000 {
+			compatible = "mediatek,mt8195-disp-mutex";
+			reg = <0 0x1c101000 0 0x1000>;
+			reg-names = "vdo1_mutex";
+			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
+			clock-names = "vdo1_mutex";
+			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
+		};
+
 		larb2: larb@1c102000 {
 			compatible = "mediatek,mt8195-smi-larb";
 			reg = <0 0x1c102000 0 0x1000>;
@@ -2610,6 +2796,151 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 		};
 
+		vdo1_rdma0: rdma@1c104000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c104000 0 0x1000>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+		};
+
+		vdo1_rdma1: rdma@1c105000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c105000 0 0x1000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA1>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+		};
+
+		vdo1_rdma2: rdma@1c106000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c106000 0 0x1000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA2>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+		};
+
+		vdo1_rdma3: rdma@1c107000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c107000 0 0x1000>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA3>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+		};
+
+		vdo1_rdma4: rdma@1c108000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c108000 0 0x1000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA4>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+		};
+
+		vdo1_rdma5: rdma@1c109000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c109000 0 0x1000>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA5>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+		};
+
+		vdo1_rdma6: rdma@1c10a000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10a000 0 0x1000>;
+			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA6>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+		};
+
+		vdo1_rdma7: rdma@1c10b000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10b000 0 0x1000>;
+			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA7>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+		};
+
+		merge1: vpp-merge@1c10c000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10c000 0 0x1000>;
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE0>,
+				 <&vdosys1 CLK_VDO1_MERGE0_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xc000 0x1000>;
+			mediatek,merge-mute = <1>;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE0_DL_ASYNC>;
+		};
+
+		merge2: vpp-merge@1c10d000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10d000 0 0x1000>;
+			interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE1>,
+				 <&vdosys1 CLK_VDO1_MERGE1_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xd000 0x1000>;
+			mediatek,merge-mute = <1>;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE1_DL_ASYNC>;
+		};
+
+		merge3: vpp-merge@1c10e000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10e000 0 0x1000>;
+			interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE2>,
+				 <&vdosys1 CLK_VDO1_MERGE2_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xe000 0x1000>;
+			mediatek,merge-mute = <1>;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE2_DL_ASYNC>;
+		};
+
+		merge4: vpp-merge@1c10f000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10f000 0 0x1000>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE3>,
+				 <&vdosys1 CLK_VDO1_MERGE3_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xf000 0x1000>;
+			mediatek,merge-mute = <1>;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE3_DL_ASYNC>;
+		};
+
+		merge5: vpp-merge@1c110000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c110000 0 0x1000>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
+				 <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x0000 0x1000>;
+			mediatek,merge-fifo-en = <1>;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>;
+		};
+
 		dp_intf1: dp-intf@1c113000 {
 			compatible = "mediatek,mt8195-dp-intf";
 			reg = <0 0x1c113000 0 0x1000>;
@@ -2622,6 +2953,54 @@
 			status = "disabled";
 		};
 
+		ethdr0: hdr-engine@1c114000 {
+			compatible = "mediatek,mt8195-disp-ethdr";
+			reg = <0 0x1c114000 0 0x1000>,
+			      <0 0x1c115000 0 0x1000>,
+			      <0 0x1c117000 0 0x1000>,
+			      <0 0x1c119000 0 0x1000>,
+			      <0 0x1c11a000 0 0x1000>,
+			      <0 0x1c11b000 0 0x1000>,
+			      <0 0x1c11c000 0 0x1000>;
+			reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				    "vdo_be", "adl_ds";
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+				 <&vdosys1 CLK_VDO1_26M_SLOW>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+				 <&topckgen CLK_TOP_ETHDR>;
+			clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				      "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+				      "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
+				      "ethdr_top";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
+				 <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
+			interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
+			resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
+			reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async",
+				      "gfx_fe1_async", "vdo_be_async";
+		};
+
 		edp_tx: edp-tx@1c500000 {
 			compatible = "mediatek,mt8195-edp-tx";
 			reg = <0 0x1c500000 0 0x8000>;
@@ -2644,4 +3023,246 @@
 			status = "disabled";
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
new file mode 100644
index 000000000000..ceb48eb1a6e6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021-2022 BayLibre, SAS.
+ * Authors:
+ * Fabien Parent <fparent@baylibre.com>
+ * Bernhard Rosenkränzer <bero@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+#include "mt8365.dtsi"
+
+/ {
+	model = "MediaTek MT8365 Open Platform EVK";
+	compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-volume-up {
+			gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0xc0000000>;
+	};
+
+	usb_otg_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x30000>;
+		};
+
+		/* 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pio {
+	gpio_keys: gpio-keys-pins {
+		pins {
+			pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <MT8365_PIN_57_SDA0__FUNC_SDA0_0>,
+				 <MT8365_PIN_58_SCL0__FUNC_SCL0_0>;
+			bias-pull-up;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
+				 <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
+				 <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
+				 <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
+		};
+	};
+
+	usb_pins: usb-pins {
+		id-pins {
+			pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		usb0-vbus-pins {
+			pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
+			output-high;
+		};
+
+		usb1-vbus-pins {
+			pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
+			output-high;
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		pins {
+			pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
+				 <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
+		};
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
new file mode 100644
index 000000000000..1f6b48359115
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -0,0 +1,488 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) 2018 MediaTek Inc.
+ * Copyright (C) 2022 BayLibre SAS
+ * Fabien Parent <fparent@baylibre.com>
+ * Bernhard Rosenkränzer <bero@baylibre.com>
+ */
+#include <dt-bindings/clock/mediatek,mt8365-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	compatible = "mediatek,mt8365";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+		};
+	};
+
+	clk26m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>, /* GICD */
+			      <0 0x0c080000 0 0x80000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,  /* GICC */
+			      <0 0x0c410000 0 0x1000>,  /* GICH */
+			      <0 0x0c420000 0 0x2000>;  /* GICV */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8365-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8365-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8365-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		syscfg_pctl: syscfg-pctl@10005000 {
+			compatible = "mediatek,mt8365-syscfg", "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8365-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8365-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8365-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
+				 <&infracfg CLK_IFR_PMIC_AP>,
+				 <&infracfg CLK_IFR_PWRAP_SYS>,
+				 <&infracfg CLK_IFR_PWRAP_TMR>;
+			clock-names = "spi", "wrap", "sys", "tmr";
+		};
+
+		keypad: keypad@10010000 {
+			compatible = "mediatek,mt6779-keypad";
+			reg = <0 0x10010000 0 0x1000>;
+			wakeup-source;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
+		mcucfg: syscon@10200000 {
+			compatible = "mediatek,mt8365-mcucfg", "syscon";
+			reg = <0 0x10200000 0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		sysirq: interrupt-controller@10200a80 {
+			compatible = "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200a80 0 0x20>;
+		};
+
+		infracfg_nao: infracfg@1020e000 {
+			compatible = "mediatek,mt8365-infracfg", "syscon";
+			reg = <0 0x1020e000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rng: rng@1020f000 {
+			compatible = "mediatek,mt8365-rng", "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_IFR_TRNG>;
+			clock-names = "rng";
+		};
+
+		apdma: dma-controller@11000280 {
+			compatible = "mediatek,mt8365-uart-dma", "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000280 0 0x80>,
+			      <0 0x11000300 0 0x80>,
+			      <0 0x11000380 0 0x80>,
+			      <0 0x11000400 0 0x80>,
+			      <0 0x11000580 0 0x80>,
+			      <0 0x11000600 0 0x80>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <6>;
+			clocks = <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "apdma";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0>, <&apdma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2>, <&apdma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4>, <&apdma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		pwm: pwm@11006000 {
+			compatible = "mediatek,mt8365-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_IFR_PWM_HCLK>,
+				 <&infracfg CLK_IFR_PWM>,
+				 <&infracfg CLK_IFR_PWM1>,
+				 <&infracfg CLK_IFR_PWM2>,
+				 <&infracfg CLK_IFR_PWM3>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C0_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C1_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C2_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi";
+			reg = <0 0x1100a000 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_IFR_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C3_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusb: usb@11201000 {
+			compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+				 <&infracfg CLK_IFR_SSUSB_REF>,
+				 <&infracfg CLK_IFR_SSUSB_SYS>,
+				 <&infracfg CLK_IFR_ICUSB>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: usb@11200000 {
+				compatible = "mediatek,mt8365-xhci", "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+					 <&infracfg CLK_IFR_SSUSB_REF>,
+					 <&infracfg CLK_IFR_SSUSB_SYS>,
+					 <&infracfg CLK_IFR_ICUSB>,
+					 <&infracfg CLK_IFR_SSUSB_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck",
+					      "dma_ck", "xhci_ck";
+				status = "disabled";
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11cd0000 0 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+				 <&infracfg CLK_IFR_MSDC0_HCLK>,
+				 <&infracfg CLK_IFR_MSDC0_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11c90000 0 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+				 <&infracfg CLK_IFR_MSDC1_HCLK>,
+				 <&infracfg CLK_IFR_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11250000 0 0x1000>,
+			      <0 0x11c60000 0 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>,
+				 <&infracfg CLK_IFR_MSDC2_HCLK>,
+				 <&infracfg CLK_IFR_MSDC2_SRC>,
+				 <&infracfg CLK_IFR_MSDC2_BK>,
+				 <&infracfg CLK_IFR_AP_MSDC0>;
+			clock-names = "source", "hclk", "source_cg",
+				      "bus_clk", "sys_cg";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@112a0000 {
+			compatible = "mediatek,mt8365-eth";
+			reg = <0 0x112a0000 0 0x1000>;
+			mediatek,pericfg = <&infracfg>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_ETH_SEL>,
+				 <&infracfg CLK_IFR_NIC_AXI>,
+				 <&infracfg CLK_IFR_NIC_SLV_AXI>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
+		u3phy: t-phy@11cc0000 {
+			compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11cc0000 0x9000>;
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x400>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+					 <&topckgen CLK_TOP_USB20_48M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u2port1: usb-phy@1000 {
+				reg = <0x1000 0x400>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+					 <&topckgen CLK_TOP_USB20_48M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	systimer: timer@10017000 {
+		compatible = "mediatek,mt8365-systimer", "mediatek,mt6765-timer";
+		reg = <0 0x10017000 0 0x100>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&system_clk>;
+		clock-names = "clk13m";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index bc34c9d8846a..1406d5d40b8f 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -9,6 +9,7 @@ DTC_FLAGS_tegra194-p2972-0000 := -@
 DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@
 DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@
 DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@
+DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@
 
 dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
@@ -24,3 +25,4 @@ dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index c017764bc27e..8b78be8f4f9d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -338,9 +338,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
-		clock-names = "serial";
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -352,9 +350,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
-		clock-names = "serial";
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -366,9 +362,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
-		clock-names = "serial";
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -380,9 +374,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
-		clock-names = "serial";
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index a4264ea41728..e2d6857a3709 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -145,6 +145,7 @@
 	/* SDMMC3 (SDIO) */
 	mmc@3440000 {
 		status = "okay";
+		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
 	/* SDMMC4 (eMMC) */
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index efc450821398..7e4c496fd91c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -610,9 +610,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTA>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTA>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 133dbe5b429d..154fc8c0eb6d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -22,7 +22,7 @@
 
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>;
+		ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
 		apbmisc: misc@100000 {
 			compatible = "nvidia,tegra194-misc";
@@ -745,9 +745,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTA>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTA>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -757,9 +755,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTB>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTB>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 980565bf02c9..0e463b3cbe01 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -618,9 +618,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_UARTA>;
-		clock-names = "serial";
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -632,9 +630,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_UARTB>;
-		clock-names = "serial";
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -646,9 +642,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_UARTC>;
-		clock-names = "serial";
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -660,9 +654,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_UARTD>;
-		clock-names = "serial";
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 8a9747855d6b..caa9e952a149 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/sound/rt5640.h>
 
 #include "tegra234-p3701-0000.dtsi"
 #include "tegra234-p3737-0000.dtsi"
@@ -49,7 +50,7 @@
 
 							i2s1_dap: endpoint {
 								dai-format = "i2s";
-								/* placeholder for external codec */
+								remote-endpoint = <&rt5640_ep>;
 							};
 						};
 					};
@@ -2017,6 +2018,30 @@
 			status = "okay";
 		};
 
+		i2c@31e0000 {
+			status = "okay";
+
+			audio-codec@1c {
+				compatible = "realtek,rt5640";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
+				clock-names = "mclk";
+				realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
+				realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
+				realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
+				sound-name-prefix = "CVB-RT";
+
+				port {
+					rt5640_ep: endpoint {
+						remote-endpoint = <&i2s1_dap>;
+						mclk-fs = <256>;
+					};
+				};
+			};
+		};
+
 		pwm@32a0000 {
 			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
@@ -2073,11 +2098,21 @@
 				usb2-0 {
 					mode = "host";
 					status = "okay";
+					port {
+						hs_typec_p1: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p1>;
+						};
+					};
 				};
 
 				usb2-1 {
 					mode = "host";
 					status = "okay";
+					port {
+						hs_typec_p0: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p0>;
+						};
+					};
 				};
 
 				usb2-2 {
@@ -2093,11 +2128,21 @@
 				usb3-0 {
 					nvidia,usb2-companion = <1>;
 					status = "okay";
+					port {
+						ss_typec_p0: endpoint {
+							remote-endpoint = <&ss_ucsi_ccg_p0>;
+						};
+					};
 				};
 
 				usb3-1 {
 					nvidia,usb2-companion = <0>;
 					status = "okay";
+					port {
+						ss_typec_p1: endpoint {
+							remote-endpoint = <&ss_ucsi_ccg_p1>;
+						};
+					};
 				};
 
 				usb3-2 {
@@ -2190,6 +2235,64 @@
 			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
 				    "p2u-5", "p2u-6", "p2u-7";
 		};
+
+		i2c@c240000 {
+			status = "okay";
+			typec@8 {
+				compatible = "cypress,cypd4226";
+				reg = <0x08>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
+				firmware-name = "nvidia,jetson-agx-xavier";
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ccg_typec_con0: connector@0 {
+					compatible = "usb-c-connector";
+					reg = <0>;
+					label = "USB-C";
+					data-role = "host";
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						port@0 {
+							reg = <0>;
+							hs_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&hs_typec_p0>;
+							};
+						};
+						port@1 {
+							reg = <1>;
+							ss_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&ss_typec_p0>;
+							};
+						};
+					};
+				};
+				ccg_typec_con1: connector@1 {
+					compatible = "usb-c-connector";
+					reg = <1>;
+					label = "USB-C";
+					data-role = "dual";
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						port@0 {
+							reg = <0>;
+							hs_ucsi_ccg_p1: endpoint {
+								remote-endpoint = <&hs_typec_p1>;
+							};
+						};
+						port@1 {
+							reg = <1>;
+							ss_ucsi_ccg_p1: endpoint {
+								remote-endpoint = <&ss_typec_p1>;
+							};
+						};
+					};
+				};
+			};
+		};
 	};
 
 	gpio-keys {
@@ -2293,5 +2396,23 @@
 		       <&dmic3_port>;
 
 		label = "NVIDIA Jetson AGX Orin APE";
+
+		widgets = "Microphone",	"CVB-RT MIC Jack",
+			  "Microphone",	"CVB-RT MIC",
+			  "Headphone",	"CVB-RT HP Jack",
+			  "Speaker",	"CVB-RT SPK";
+
+		routing = /* I2S1 <-> RT5640 */
+			  "CVB-RT AIF1 Playback",	"I2S1 DAP-Playback",
+			  "I2S1 DAP-Capture",		"CVB-RT AIF1 Capture",
+			  /* RT5640 codec controls */
+			  "CVB-RT HP Jack",		"CVB-RT HPOL",
+			  "CVB-RT HP Jack",		"CVB-RT HPOR",
+			  "CVB-RT IN1P",		"CVB-RT MIC Jack",
+			  "CVB-RT IN2P",		"CVB-RT MIC Jack",
+			  "CVB-RT SPK",			"CVB-RT SPOLP",
+			  "CVB-RT SPK",			"CVB-RT SPORP",
+			  "CVB-RT DMIC1",		"CVB-RT MIC",
+			  "CVB-RT DMIC2",		"CVB-RT MIC";
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
new file mode 100644
index 000000000000..baf4f69e410d
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234-p3767.dtsi"
+
+/ {
+	compatible = "nvidia,p3767-0000", "nvidia,tegra234";
+	model = "NVIDIA Jetson Orin NX";
+
+	bus@0 {
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Orin NX HDA";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
new file mode 100644
index 000000000000..bd60478fa75e
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234.dtsi"
+
+/ {
+	compatible = "nvidia,p3767", "nvidia,tegra234";
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8_hs>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <136000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		/*
+		 * This only exists on Jetson Orin Nano Developer Kit (SKU 5)
+		 * but UEFI needs this and will remove it on devices where it
+		 * doesn't exist.
+		 */
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+			disable-wp;
+		};
+
+		hda@3510000 {
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			vclamp-usb-supply = <&vdd_1v8_ao>;
+			avdd-usb-supply = <&vdd_3v3_ao>;
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_hs: regulator-vdd-1v8-hs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_HS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_ao: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <33000000>;
+		regulator-max-microvolt = <33000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	thermal-zones {
+		/*
+		 * This monitoring is far from optimal, but it's good enough
+		 * at this stage.
+		 */
+		cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <1000>;
+			status = "okay";
+
+			trips {
+				critical {
+					temperature = <104500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				hot {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				board_trip_passive: passive {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				board_trip_active2: active-2 {
+					temperature = <80000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				board_trip_active1: active-1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				board_trip_active0: active-0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				passive {
+					cooling-device = <&fan 3 3>;
+					trip = <&board_trip_passive>;
+				};
+
+				active2 {
+					cooling-device = <&fan 2 3>;
+					trip = <&board_trip_active2>;
+				};
+
+				active1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&board_trip_active1>;
+				};
+
+				active0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&board_trip_active0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
new file mode 100644
index 000000000000..7dfbc38eb3c4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra234-p3767-0000.dtsi"
+#include "tegra234-p3768-0000.dtsi"
+
+/ {
+	compatible = "nvidia,p3768-0000+p3767-0000", "nvidia,p3767-0000", "nvidia,tegra234";
+	model = "NVIDIA Jetson Orin NX Engineering Reference Developer Kit";
+
+	aliases {
+		serial0 = &tcu;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		serial@31d0000 {
+			current-speed = <115200>;
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Orin NX HDA";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+		};
+
+		/* C1 - M.2 Key-E */
+		pcie@14100000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_3>;
+			phy-names = "p2u-0";
+		};
+
+		/* C4 - M.2 Key-M */
+		pcie@14160000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+			       <&p2u_hsio_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		/* C8 - Ethernet */
+		pcie@140a0000 {
+			status = "okay";
+
+			num-lanes = <2>;
+
+			phys = <&p2u_gbe_2>, <&p2u_gbe_3>;
+			phy-names = "p2u-0", "p2u-1";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+		};
+
+		/* C7 - M.2 Key-M */
+		pcie@141e0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_gbe_0>, <&p2u_gbe_1>;
+			phy-names = "p2u-0", "p2u-1";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm3 0 45334>;
+		cooling-levels = <0 95 178 255>;
+		#cooling-cells = <2>;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	serial {
+		status = "okay";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
new file mode 100644
index 000000000000..aee21428e1a5
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	compatible = "nvidia,p3768-0000";
+
+	aliases {
+		serial0 = &tcu;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8_sys>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		serial@31d0000 {
+			current-speed = <115200>;
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				/* recovery port */
+				usb2-0 {
+					mode = "otg";
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+					usb-role-switch;
+				};
+
+				/* hub */
+				usb2-1 {
+					mode = "host";
+					vbus-supply = <&vdd_1v1_hub>;
+					status = "okay";
+				};
+
+				/* M.2 Key-E */
+				usb2-2 {
+					mode = "host";
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+
+				/* hub */
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+
+				/* J5 */
+				usb3-1 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb3-1";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0",
+				    "usb3-1";
+		};
+
+		/* C1 - M.2 Key-E */
+		pcie@14100000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_3>;
+			phy-names = "p2u-0";
+		};
+
+		/* C4 - M.2 Key-M */
+		pcie@14160000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+			       <&p2u_hsio_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		/* C8 - Ethernet */
+		pcie@140a0000 {
+			status = "okay";
+
+			num-lanes = <2>;
+
+			phys = <&p2u_gbe_2>, <&p2u_gbe_3>;
+			phy-names = "p2u-0", "p2u-1";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+		};
+
+		/* C7 - M.2 Key-M */
+		pcie@141e0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_gbe_0>, <&p2u_gbe_1>;
+			phy-names = "p2u-0", "p2u-1";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm3 0 45334>;
+		cooling-levels = <0 95 178 255>;
+		#cooling-cells = <2>;
+	};
+
+	vdd_1v8_sys: regulator-vdd-1v8-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_SYS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v1_hub: regulator-vdd-1v1-hub {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_AV10_HUB";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vdd_5v0_sys>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	serial {
+		status = "okay";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 8fe8eda7654d..5d354f8923b4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -20,7 +20,7 @@
 
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>;
+		ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
 		misc@100000 {
 			compatible = "nvidia,tegra234-misc";
@@ -676,9 +676,7 @@
 			reg = <0x0 0x03100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA234_CLK_UARTA>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA234_RESET_UARTA>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -3402,6 +3400,24 @@
 		};
 	};
 
+	dsu-pmu0 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		cpus = <&cpu0_0>, <&cpu0_1>, <&cpu0_2>, <&cpu0_3>;
+	};
+
+	dsu-pmu1 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
+		cpus = <&cpu1_0>, <&cpu1_1>, <&cpu1_2>, <&cpu1_3>;
+	};
+
+	dsu-pmu2 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		cpus = <&cpu2_0>, <&cpu2_1>, <&cpu2_2>, <&cpu2_3>;
+	};
+
 	pmu {
 		compatible = "arm,cortex-a78-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 31aa54f0428c..d42c59572ace 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -3,10 +3,13 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-al02-c7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-asus-z00l.dtb
@@ -28,6 +31,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
@@ -69,12 +73,15 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
@@ -83,9 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r3-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-homestar-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-homestar-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-homestar-r4.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-kingoftown-r0.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-kingoftown-r1.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-kingoftown.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1-kb.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1-lte.dtb
@@ -100,10 +105,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r9.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r9.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-mrbland-rev0-auo.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-mrbland-rev0-boe.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-mrbland-rev1-auo.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-mrbland-rev1-boe.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-parade.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-ti.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-parade.dtb
@@ -118,8 +119,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-quackingstick-r0.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-quackingstick-r0-lte.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev0-boe.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev0-inx.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-boe.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-inx.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb
@@ -177,6 +176,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115p-lenovo-j606f.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
@@ -189,7 +189,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-csot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
@@ -200,3 +201,4 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index c52d79a55d80..59860a2223b8 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -325,12 +325,6 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
-&pronto {
-	status = "okay";
-
-	firmware-name = "qcom/apq8016/wcnss.mbn";
-};
-
 &sdhc_1 {
 	status = "okay";
 
@@ -411,10 +405,19 @@
 	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 };
 
+&wcnss {
+	status = "okay";
+	firmware-name = "qcom/apq8016/wcnss.mbn";
+};
+
 &wcnss_ctrl {
 	firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
 };
 
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 /* Enable CoreSight */
 &cti0 { status = "okay"; };
 &cti1 { status = "okay"; };
@@ -726,7 +729,6 @@
 		function = "gpio";
 
 		drive-strength = <8>;
-		input-enable;
 		bias-pull-up;
 	};
 
@@ -767,7 +769,6 @@
 		function = "gpio";
 
 		drive-strength = <8>;
-		input-enable;
 		bias-pull-up;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index fe6c415e8229..b599909c4463 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -63,7 +63,6 @@
 	};
 
 	clocks {
-		compatible = "simple-bus";
 		divclk4: divclk4 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -146,7 +145,6 @@
 
 &blsp1_spi1 {
 	/* On Low speed expansion */
-	label = "LS-SPI0";
 	status = "okay";
 };
 
@@ -183,7 +181,6 @@
 
 &blsp2_spi6 {
 	/* On High speed expansion */
-	label = "HS-SPI1";
 	status = "okay";
 };
 
@@ -706,8 +703,7 @@
 &pmi8994_spmi_regulators {
 	vdd_s2-supply = <&vph_pwr>;
 
-	vdd_gfx: s2@1700 {
-		reg = <0x1700 0x100>;
+	vdd_gfx: s2 {
 		regulator-name = "VDD_GFX";
 		regulator-min-microvolt = <980000>;
 		regulator-max-microvolt = <980000>;
@@ -974,6 +970,50 @@
 	};
 };
 
+&slim_msm {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		tasha_ifd: tas-ifd@0,0 {
+			compatible = "slim217,1a0";
+			reg = <0 0>;
+		};
+
+		wcd9335: codec@1,0 {
+			compatible = "slim217,1a0";
+			reg = <1 0>;
+
+			clock-names = "mclk", "slimbus";
+			clocks = <&div1_mclk>,
+				 <&rpmcc RPM_SMD_BB_CLK1>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+				     <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "intr1", "intr2";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			slim-ifc-dev = <&tasha_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			vdd-buck-supply = <&vreg_s4a_1p8>;
+			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+			vdd-tx-supply = <&vreg_s4a_1p8>;
+			vdd-rx-supply = <&vreg_s4a_1p8>;
+			vdd-io-supply = <&vreg_s4a_1p8>;
+		};
+	};
+};
+
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "DB820c";
@@ -1026,7 +1066,7 @@
 
 		platform {
 			sound-dai = <&q6routing>;
-	};
+		};
 
 		codec {
 			sound-dai = <&wcd9335 AIF4_PB>;
@@ -1095,21 +1135,8 @@
 
 	vdda-phy-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
-
 };
 
 &venus {
 	status = "okay";
 };
-
-&wcd9335 {
-	clock-names = "mclk", "slimbus";
-	clocks = <&div1_mclk>,
-		 <&rpmcc RPM_SMD_BB_CLK1>;
-
-	vdd-buck-supply = <&vreg_s4a_1p8>;
-	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
-	vdd-tx-supply = <&vreg_s4a_1p8>;
-	vdd-rx-supply = <&vreg_s4a_1p8>;
-	vdd-io-supply = <&vreg_s4a_1p8>;
-};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
new file mode 100644
index 000000000000..3af1d5556950
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 AP-MI01.2 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.2";
+	compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
+
+	aliases {
+		serial0 = &blsp1_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_i2c1 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo_board {
+	clock-frequency = <24000000>;
+};
+
+/* PINCTRL */
+
+&tlmm {
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio29", "gpio30";
+		function = "blsp1_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
new file mode 100644
index 000000000000..3b6a5cb8bf07
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP468 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6";
+	compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
+
+	aliases {
+		serial0 = &blsp1_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo_board {
+	clock-frequency = <24000000>;
+};
+
+/* PINCTRL */
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
new file mode 100644
index 000000000000..12e0e179e139
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq5332", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1488000000 {
+			opp-hz = /bits/ 64 <1488000000>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_mem: tz@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x200000>;
+			no-map;
+		};
+
+		smem@4a800000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4a800000 0x0 0x00100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 0>;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		rng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq5332-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 53>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			serial_0_pins: serial0-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp0_uart0";
+				drive-strength = <8>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq5332-gcc";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq5332", "syscon";
+			reg = <0x01937000 0x21000>;
+		};
+
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+
+			interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1d000>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_spi0: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,	/* GICD */
+			      <0x0b002000 0x1000>,	/* GICC */
+			      <0x0b001000 0x1000>,	/* GICH */
+			      <0x0b004000 0x1000>;	/* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		watchdog: watchdog@b017000 {
+			compatible = "qcom,apss-wdt-ipq5332", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <30>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq5332-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo_board>;
+			clock-names = "pll", "xo";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq5332-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index 2aee8594b280..f5f4827c0e17 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -35,7 +35,6 @@
 };
 
 &blsp1_spi1 {
-	cs-select = <0>;
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index bbd94025ff5d..9ff4e9d45065 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -738,8 +738,8 @@
 			phys = <&pcie_phy0>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>,
-				 <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>;
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
+				 <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
 
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index ca3f96646b90..5cf07caf4103 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -62,11 +62,11 @@
 	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
-&pcie_phy0 {
+&pcie_qmp0 {
 	status = "okay";
 };
 
-&pcie_phy1 {
+&pcie_qmp1 {
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
index 651a231554e0..1b8379ba87f9 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -48,11 +48,11 @@
 	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 };
 
-&pcie_phy0 {
+&pcie_qmp0 {
 	status = "okay";
 };
 
-&pcie_phy1 {
+&pcie_qmp1 {
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 62d05d740646..84e715aa4310 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -397,7 +397,6 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
-			cell-index = <0>;
 		};
 
 		sdhc_1: mmc@7824900 {
@@ -687,7 +686,8 @@
 		};
 
 		apcs_glb: mailbox@b111000 {
-			compatible = "qcom,ipq8074-apcs-apps-global";
+			compatible = "qcom,ipq8074-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			clocks = <&a53pll>, <&xo>;
 			clock-names = "pll", "xo";
@@ -780,10 +780,8 @@
 			phys = <&pcie_phy1>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x10200000 0x10200000
-				  0 0x10000>,   /* downstream I/O */
-				 <0x82000000 0 0x10220000 0x10220000
-				  0 0xfde0000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
+				 <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
 
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -844,10 +842,8 @@
 			phys = <&pcie_phy0>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x20200000 0x20200000
-				  0 0x10000>, /* downstream I/O */
-				 <0x82000000 0 0x20220000 0x20220000
-				  0 0xfde0000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>,   /* I/O */
+				 <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
 
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
new file mode 100644
index 000000000000..2c8430197ec0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 AL02-C7 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
+	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	max-frequency = <384000000>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2",
+			       "gpio3", "gpio6", "gpio7",
+			       "gpio8", "gpio9";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "gpio10";
+			function = "sdc_rclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
new file mode 100644
index 000000000000..3bb7435f5e7f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 SoC device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <353000000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_region: tz@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq9574-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 65>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart2_pins: uart2-state {
+				pins = "gpio34", "gpio35";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq9574-gcc";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&sleep_clk>,
+				 <&bias_pll_ubi_nc_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "iface", "core", "xo";
+			non-removable;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,  /* GICD */
+			      <0x0b002000 0x1000>,  /* GICC */
+			      <0x0b001000 0x1000>,  /* GICH */
+			      <0x0b004000 0x1000>;  /* GICV */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index ed3fa7b3575b..13cd9ad167df 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -118,10 +118,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
@@ -149,6 +145,14 @@
 	extcon = <&usb_id>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 701a5585d77e..fecb69944cfa 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -160,10 +160,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	status = "okay";
 
@@ -191,6 +187,14 @@
 	extcon = <&usb_id>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index 3618704a5330..91284a1d0966 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -128,10 +128,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	status = "okay";
 
@@ -159,6 +155,14 @@
 	extcon = <&usb_id>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
index a0e520edde02..525ec76efeeb 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -118,10 +118,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
@@ -149,6 +145,14 @@
 	extcon = <&usb_id>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index 8c07eca900d3..5b1bac8f5122 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -227,10 +227,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	status = "okay";
 
@@ -312,6 +308,14 @@
 	qcom,hphl-jack-type-normally-open;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index d1e8cf2f50c0..f1dd625e1822 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -231,10 +231,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	status = "okay";
 
@@ -263,6 +259,14 @@
 	extcon = <&pm8916_usbin>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 3899e11b9843..b79e80913af9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -99,10 +99,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	status = "okay";
 
@@ -130,6 +126,14 @@
 	extcon = <&usb_id>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
index 8cac23b5240c..6eb5e0a39510 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
@@ -20,17 +20,6 @@
 	pll-supply = <&pm8916_l7>;
 };
 
-&pronto {
-	vddpx-supply = <&pm8916_l7>;
-
-	iris {
-		vddxo-supply = <&pm8916_l7>;
-		vddrfa-supply = <&pm8916_s3>;
-		vddpa-supply = <&pm8916_l9>;
-		vdddig-supply = <&pm8916_l5>;
-	};
-};
-
 &sdhc_1 {
 	vmmc-supply = <&pm8916_l8>;
 	vqmmc-supply = <&pm8916_l5>;
@@ -46,6 +35,17 @@
 	v3p3-supply = <&pm8916_l13>;
 };
 
+&wcnss {
+	vddpx-supply = <&pm8916_l7>;
+};
+
+&wcnss_iris {
+	vddxo-supply = <&pm8916_l7>;
+	vddrfa-supply = <&pm8916_s3>;
+	vddpa-supply = <&pm8916_l9>;
+	vdddig-supply = <&pm8916_l5>;
+};
+
 &rpm_requests {
 	smd_rpm_regulators: regulators {
 		compatible = "qcom,rpm-pm8916-regulators";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index a2ed7bdbf528..16d67749960e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -252,10 +252,6 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index c691cca2eb45..a1ca4d883420 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -112,6 +112,14 @@
 	status = "okay";
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &msmgpio {
 	panel_vdd3_default: panel-vdd3-default-state {
 		pins = "gpio9";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index 3dd819458785..4e10b8a5e9f9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -54,12 +54,6 @@
 	status = "okay";
 };
 
-&pronto {
-	iris {
-		compatible = "qcom,wcn3660b";
-	};
-};
-
 &touchkey {
 	vcc-supply = <&reg_touch_key>;
 	vdd-supply = <&reg_touch_key>;
@@ -69,6 +63,14 @@
 	status = "okay";
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
 &msmgpio {
 	tkey_en_default: tkey-en-default-state {
 		pins = "gpio97";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
index c95f0b4bc61f..f6c4a011fdfd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -58,6 +58,14 @@
 	vdd-supply = <&reg_touch_key>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &msmgpio {
 	tkey_en_default: tkey-en-default-state {
 		pins = "gpio97";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
index d920b7247d82..74ffd04db8d8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -125,14 +125,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-
-	iris {
-		compatible = "qcom,wcn3660b";
-	};
-};
-
 &sdhc_1 {
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
@@ -162,6 +154,14 @@
 	extcon = <&pm8916_usbin>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
index f3b81b6f0a2f..adeee0830e76 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -93,10 +93,6 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	status = "okay";
 
@@ -124,6 +120,14 @@
 	extcon = <&muic>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index d4984b3af802..1a41a4db874d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -272,14 +272,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-
-	iris {
-		compatible = "qcom,wcn3660b";
-	};
-};
-
 &sdhc_1 {
 	status = "okay";
 
@@ -320,6 +312,14 @@
 	extcon = <&muic>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
index c492db856190..82e260375174 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
@@ -33,7 +33,3 @@
 &gpio_leds_default {
 	pins = "gpio81", "gpio82", "gpio83";
 };
-
-&sim_ctrl_default {
-	pins = "gpio1", "gpio2";
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
index 700cf81cbf8c..978f0abcdf8f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
@@ -25,6 +25,11 @@
 	gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
 };
 
+&mpss {
+	pinctrl-0 = <&sim_ctrl_default>;
+	pinctrl-names = "default";
+};
+
 &button_default {
 	pins = "gpio37";
 	bias-pull-down;
@@ -34,6 +39,28 @@
 	pins = "gpio20", "gpio21", "gpio22";
 };
 
-&sim_ctrl_default {
-	pins = "gpio1", "gpio2";
+/* This selects the external SIM card slot by default */
+&msmgpio {
+	sim_ctrl_default: sim-ctrl-default-state {
+		esim-sel-pins {
+			pins = "gpio0", "gpio3";
+			function = "gpio";
+			bias-disable;
+			output-low;
+		};
+
+		sim-en-pins {
+			pins = "gpio1";
+			function = "gpio";
+			bias-disable;
+			output-low;
+		};
+
+		sim-sel-pins {
+			pins = "gpio2";
+			function = "gpio";
+			bias-disable;
+			output-high;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
index 790a9696da9d..50bae6f214f1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
@@ -92,9 +92,6 @@
 };
 
 &mpss {
-	pinctrl-0 = <&sim_ctrl_default>;
-	pinctrl-names = "default";
-
 	status = "okay";
 };
 
@@ -102,10 +99,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
@@ -125,6 +118,14 @@
 	extcon = <&pm8916_usbin>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
@@ -240,11 +241,4 @@
 		drive-strength = <2>;
 		bias-disable;
 	};
-
-	sim_ctrl_default: sim-ctrl-default-state {
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
-	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index a87be1d95b14..ac56c7595f78 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -153,10 +153,6 @@
 	status = "okay";
 };
 
-&pronto {
-	status = "okay";
-};
-
 &sdhc_1 {
 	status = "okay";
 
@@ -184,6 +180,14 @@
 	extcon = <&usb_id>;
 };
 
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
new file mode 100644
index 000000000000..74ce6563be18
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-ufi.dtsi"
+
+/ {
+	model = "uz801 v3.0 4G Modem Stick";
+	compatible = "yiming,uz801-v3", "qcom,msm8916";
+};
+
+&button_restart {
+	gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>;
+};
+
+&led_r {
+	gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>;
+};
+
+&led_g {
+	gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>;
+};
+
+&led_b {
+	gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>;
+};
+
+&button_default {
+	pins = "gpio23";
+	bias-pull-up;
+};
+
+&gpio_leds_default {
+	pins = "gpio6", "gpio7", "gpio8";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 0733c2f4f379..7e0fa37a3adf 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -503,7 +503,7 @@
 				bits = <1 7>;
 			};
 
-			tsens_mode: mode@ec {
+			tsens_mode: mode@ef {
 				reg = <0xef 0x1>;
 				bits = <5 3>;
 			};
@@ -1870,7 +1870,7 @@
 			};
 		};
 
-		pronto: remoteproc@a21b000 {
+		wcnss: remoteproc@a21b000 {
 			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
 			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
 			reg-names = "ccu", "dxe", "pmu";
@@ -1896,9 +1896,8 @@
 
 			status = "disabled";
 
-			iris {
-				compatible = "qcom,wcn3620";
-
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
 				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
 				clock-names = "xo";
 			};
@@ -1916,13 +1915,13 @@
 					compatible = "qcom,wcnss";
 					qcom,smd-channels = "WCNSS_CTRL";
 
-					qcom,mmio = <&pronto>;
+					qcom,mmio = <&wcnss>;
 
-					bluetooth {
+					wcnss_bt: bluetooth {
 						compatible = "qcom,wcnss-bt";
 					};
 
-					wifi {
+					wcnss_wifi: wifi {
 						compatible = "qcom,wcnss-wlan";
 
 						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
@@ -2180,7 +2179,6 @@
 				};
 			};
 		};
-
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 610f3e3fc0c2..602cb188a635 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -2,9 +2,13 @@
 /* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
 
 #include <dt-bindings/clock/qcom,gcc-msm8953.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -269,7 +273,7 @@
 				compatible = "qcom,rpm-msm8953";
 				qcom,smd-channels = "rpm_requests";
 
-				rpmcc: rpmcc {
+				rpmcc: clock-controller {
 					compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
 					clocks = <&xo_board>;
 					clock-names = "xo";
@@ -281,9 +285,6 @@
 					#power-domain-cells = <1>;
 					operating-points-v2 = <&rpmpd_opp_table>;
 
-					clocks = <&xo_board>;
-					clock-names = "ref";
-
 					rpmpd_opp_table: opp-table {
 						compatible = "operating-points-v2";
 
@@ -328,6 +329,80 @@
 		};
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		smp2p_wcnss_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_wcnss_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	smsm {
 		compatible = "qcom,smsm";
 
@@ -342,6 +417,22 @@
 
 			#qcom,smem-state-cells = <1>;
 		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	soc: soc@0 {
@@ -352,12 +443,12 @@
 
 		rpm_msg_ram: sram@60000 {
 			compatible = "qcom,rpm-msg-ram";
-			reg = <0x60000 0x8000>;
+			reg = <0x00060000 0x8000>;
 		};
 
 		hsusb_phy: phy@79000 {
 			compatible = "qcom,msm8953-qusb2-phy";
-			reg = <0x79000 0x180>;
+			reg = <0x00079000 0x180>;
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
@@ -380,8 +471,8 @@
 
 		tsens0: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
-			reg = <0x4a9000 0x1000>, /* TM */
-			      <0x4a8000 0x1000>; /* SROT */
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
 			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
@@ -391,12 +482,12 @@
 
 		restart@4ab000 {
 			compatible = "qcom,pshold";
-			reg = <0x4ab000 0x4>;
+			reg = <0x004ab000 0x4>;
 		};
 
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,msm8953-pinctrl";
-			reg = <0x1000000 0x300000>;
+			reg = <0x01000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 142>;
@@ -632,20 +723,51 @@
 				drive-strength = <2>;
 				bias-disable;
 			};
+
+			wcnss_pin_a: wcnss-active-state {
+
+				wcss-wlan2-pins {
+					pins = "gpio76";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio77";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio78";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan-pins {
+					pins = "gpio79", "gpio80";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-msm8953";
-			reg = <0x1800000 0x80000>;
+			reg = <0x01800000 0x80000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			clocks = <&xo_board>,
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&dsi0_phy 1>,
+				 <&dsi0_phy 0>,
+				 <&dsi1_phy 1>,
+				 <&dsi1_phy 0>;
 			clock-names = "xo",
 				      "sleep",
 				      "dsi0pll",
@@ -656,25 +778,25 @@
 
 		tcsr_mutex: hwlock@1905000 {
 			compatible = "qcom,tcsr-mutex";
-			reg = <0x1905000 0x20000>;
+			reg = <0x01905000 0x20000>;
 			#hwlock-cells = <1>;
 		};
 
 		tcsr: syscon@1937000 {
 			compatible = "qcom,tcsr-msm8953", "syscon";
-			reg = <0x1937000 0x30000>;
+			reg = <0x01937000 0x30000>;
 		};
 
 		tcsr_phy_clk_scheme_sel: syscon@193f044 {
 			compatible = "qcom,tcsr-msm8953", "syscon";
-			reg = <0x193f044 0x4>;
+			reg = <0x0193f044 0x4>;
 		};
 
 		mdss: display-subsystem@1a00000 {
 			compatible = "qcom,mdss";
 
-			reg = <0x1a00000 0x1000>,
-			      <0x1ab0000 0x1040>;
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x1040>;
 			reg-names = "mdss_phys",
 				    "vbif_phys";
 
@@ -701,7 +823,7 @@
 
 			mdp: display-controller@1a01000 {
 				compatible = "qcom,msm8953-mdp5", "qcom,mdp5";
-				reg = <0x1a01000 0x89000>;
+				reg = <0x01a01000 0x89000>;
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
@@ -742,7 +864,7 @@
 
 			dsi0: dsi@1a94000 {
 				compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
-				reg = <0x1a94000 0x400>;
+				reg = <0x01a94000 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
@@ -794,9 +916,9 @@
 
 			dsi0_phy: phy@1a94400 {
 				compatible = "qcom,dsi-phy-14nm-8953";
-				reg = <0x1a94400 0x100>,
-				      <0x1a94500 0x300>,
-				      <0x1a94800 0x188>;
+				reg = <0x01a94400 0x100>,
+				      <0x01a94500 0x300>,
+				      <0x01a94800 0x188>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -804,7 +926,7 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
+				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 				clock-names = "iface", "ref";
 
 				status = "disabled";
@@ -812,7 +934,7 @@
 
 			dsi1: dsi@1a96000 {
 				compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
-				reg = <0x1a96000 0x400>;
+				reg = <0x01a96000 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
@@ -861,9 +983,9 @@
 
 			dsi1_phy: phy@1a96400 {
 				compatible = "qcom,dsi-phy-14nm-8953";
-				reg = <0x1a96400 0x100>,
-				      <0x1a96500 0x300>,
-				      <0x1a96800 0x188>;
+				reg = <0x01a96400 0x100>,
+				      <0x01a96500 0x300>,
+				      <0x01a96800 0x188>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -871,7 +993,7 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
+				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 				clock-names = "iface", "ref";
 
 				status = "disabled";
@@ -880,7 +1002,7 @@
 
 		apps_iommu: iommu@1e00000 {
 			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
-			ranges  = <0 0x1e20000 0x20000>;
+			ranges  = <0 0x01e20000 0x20000>;
 
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
@@ -916,11 +1038,11 @@
 
 		spmi_bus: spmi@200f000 {
 			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x200f000 0x1000>,
-			      <0x2400000 0x800000>,
-			      <0x2c00000 0x800000>,
-			      <0x3800000 0x200000>,
-			      <0x200a000 0x2100>;
+			reg = <0x0200f000 0x1000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x2100>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
 			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
@@ -933,9 +1055,63 @@
 			#size-cells = <0>;
 		};
 
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,msm8953-mss-pil";
+			reg = <0x04080000 0x100>,
+			      <0x04020000 0x040>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>,
+					<&rpmpd MSM8953_VDDMX>,
+					<&rpmpd MSM8953_VDDMD>;
+			power-domain-names = "cx", "mx","mss";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&gcc GCC_MSS_BCR>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,smd-edge = <0>;
+				qcom,ipc = <&apcs 8 12>;
+				qcom,remote-pid = <1>;
+
+				label = "modem";
+			};
+		};
+
 		usb3: usb@70f8800 {
 			compatible = "qcom,msm8953-dwc3", "qcom,dwc3";
-			reg = <0x70f8800 0x400>;
+			reg = <0x070f8800 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -979,14 +1155,13 @@
 				snps,hird-threshold = /bits/ 8 <0x00>;
 
 				maximum-speed = "high-speed";
-				phy_mode = "utmi";
 			};
 		};
 
 		sdhc_1: mmc@7824900 {
 			compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
 
-			reg = <0x7824900 0x500>, <0x7824000 0x800>;
+			reg = <0x07824900 0x500>, <0x07824000 0x800>;
 			reg-names = "hc", "core";
 
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
@@ -995,7 +1170,7 @@
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
 			power-domains = <&rpmpd MSM8953_VDDCX>;
@@ -1046,7 +1221,7 @@
 		sdhc_2: mmc@7864900 {
 			compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
 
-			reg = <0x7864900 0x500>, <0x7864000 0x800>;
+			reg = <0x07864900 0x500>, <0x07864000 0x800>;
 			reg-names = "hc", "core";
 
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
@@ -1055,7 +1230,7 @@
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
 			power-domains = <&rpmpd MSM8953_VDDCX>;
@@ -1101,7 +1276,7 @@
 
 		uart_0: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x78af000 0x200>;
+			reg = <0x078af000 0x200>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
@@ -1112,7 +1287,7 @@
 
 		i2c_1: i2c@78b5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b5000 0x600>;
+			reg = <0x078b5000 0x600>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
@@ -1130,7 +1305,7 @@
 
 		i2c_2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b6000 0x600>;
+			reg = <0x078b6000 0x600>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
@@ -1148,7 +1323,7 @@
 
 		i2c_3: i2c@78b7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b7000 0x600>;
+			reg = <0x078b7000 0x600>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
@@ -1165,7 +1340,7 @@
 
 		i2c_4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x78b8000 0x600>;
+			reg = <0x078b8000 0x600>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
@@ -1182,7 +1357,7 @@
 
 		i2c_5: i2c@7af5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x7af5000 0x600>;
+			reg = <0x07af5000 0x600>;
 			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
@@ -1199,7 +1374,7 @@
 
 		i2c_6: i2c@7af6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x7af6000 0x600>;
+			reg = <0x07af6000 0x600>;
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
@@ -1216,7 +1391,7 @@
 
 		i2c_7: i2c@7af7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x7af7000 0x600>;
+			reg = <0x07af7000 0x600>;
 			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
@@ -1233,7 +1408,7 @@
 
 		i2c_8: i2c@7af8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x7af8000 0x600>;
+			reg = <0x07af8000 0x600>;
 			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
@@ -1248,6 +1423,72 @@
 			status = "disabled";
 		};
 
+		wcnss: remoteproc@a21b000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_fw_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>,
+					<&rpmpd MSM8953_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&smp2p_wcnss_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wcnss_pin_a>;
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
@@ -1257,13 +1498,13 @@
 
 		apcs: mailbox@b011000 {
 			compatible = "qcom,msm8953-apcs-kpss-global", "syscon";
-			reg = <0xb011000 0x1000>;
+			reg = <0x0b011000 0x1000>;
 			#mbox-cells = <1>;
 		};
 
 		timer@b120000 {
 			compatible = "arm,armv7-timer-mem";
-			reg = <0xb120000 0x1000>;
+			reg = <0x0b120000 0x1000>;
 			#address-cells = <0x01>;
 			#size-cells = <0x01>;
 			ranges;
@@ -1272,52 +1513,166 @@
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb121000 0x1000>,
-				      <0xb122000 0x1000>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
 			};
 
 			frame@b123000 {
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb123000 0x1000>;
+				reg = <0x0b123000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b124000 {
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb124000 0x1000>;
+				reg = <0x0b124000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b125000 {
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb125000 0x1000>;
+				reg = <0x0b125000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b126000 {
 				frame-number = <4>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb126000 0x1000>;
+				reg = <0x0b126000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b127000 {
 				frame-number = <5>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb127000 0x1000>;
+				reg = <0x0b127000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b128000 {
 				frame-number = <6>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb128000 0x1000>;
+				reg = <0x0b128000 0x1000>;
 				status = "disabled";
 			};
 		};
+
+		lpass: remoteproc@c200000 {
+			compatible = "qcom,msm8953-adsp-pil";
+			reg = <0x0c200000 0x100>;
+
+			interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>;
+			power-domain-names = "cx";
+
+			memory-region = <&adsp_fw_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+				label = "lpass";
+				mboxes = <&apcs 8>;
+				qcom,smd-edge = <1>;
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6core: service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+
+							dai@16 {
+								reg = <PRIMARY_MI2S_RX>;
+								qcom,sd-lines = <0 1>;
+							};
+							dai@20 {
+								reg = <TERTIARY_MI2S_TX>;
+								qcom,sd-lines = <0 1>;
+							};
+							dai@127 {
+								reg = <QUINARY_MI2S_RX>;
+								qcom,sd-lines = <0>;
+							};
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+
+							dai@0 {
+								reg = <0>;
+								direction = <Q6ASM_DAI_RX>;
+							};
+							dai@1 {
+								reg = <1>;
+								direction = <Q6ASM_DAI_TX>;
+							};
+							dai@2 {
+								reg = <2>;
+								direction = <Q6ASM_DAI_RX>;
+							};
+							dai@3 {
+								reg = <3>;
+								direction = <Q6ASM_DAI_RX>;
+								is-compress-dai;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+			};
+		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
index 67baced639c9..085d79542e1b 100644
--- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
@@ -280,3 +280,7 @@
 	vdda3p3-supply = <&pm8950_l13>;
 	status = "okay";
 };
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index 2d360d05aa5e..1f0bd24a074a 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -20,6 +20,13 @@
 
 	chosen { };
 
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -351,6 +358,8 @@
 
 				rpmcc: clock-controller {
 					compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
 					#clock-cells = <1>;
 				};
 
@@ -809,7 +818,6 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
-			cell-index = <0>;
 		};
 
 		sdhc_1: mmc@7824000 {
@@ -1027,7 +1035,8 @@
 		};
 
 		apcs: mailbox@b011000 {
-			compatible = "qcom,msm8976-apcs-kpss-global", "syscon";
+			compatible = "qcom,msm8976-apcs-kpss-global",
+				     "qcom,msm8994-apcs-kpss-global", "syscon";
 			reg = <0x0b011000 0x1000>;
 			#mbox-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index cd77dcb55872..b8f2a01bcb96 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -60,11 +60,6 @@
 			reg = <0x0 0x05000000 0x0 0x1a00000>;
 			no-map;
 		};
-
-		reserved@6c00000 {
-			reg = <0x0 0x06c00000 0x0 0x400000>;
-			no-map;
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
index 7b0f62144c3e..29e79ae0849d 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2015, Huawei Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2021-2023, Petr Vorel <petr.vorel@gmail.com>
  */
 
 /dts-v1/;
@@ -31,13 +31,18 @@
 		#size-cells = <2>;
 		ranges;
 
+		cont_splash_mem: memory@3401000 {
+			reg = <0 0x03401000 0 0x1000000>;
+			no-map;
+		};
+
 		tzapp_mem: tzapp@4800000 {
 			reg = <0 0x04800000 0 0x1900000>;
 			no-map;
 		};
 
-		removed_region: reserved@6300000 {
-			reg = <0 0x06300000 0 0xD00000>;
+		reserved@6300000 {
+			reg = <0 0x06300000 0 0x700000>;
 			no-map;
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index 4520a7e86d5b..2861bcdf87b7 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -46,8 +46,6 @@
 	};
 
 	clocks {
-		compatible = "simple-bus";
-
 		divclk4: divclk4 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -542,8 +540,7 @@
 };
 
 &pmi8994_spmi_regulators {
-	vdd_gfx: s2@1700 {
-		reg = <0x1700 0x100>;
+	vdd_gfx: s2 {
 		regulator-min-microvolt = <980000>;
 		regulator-max-microvolt = <980000>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 3ceb86b06209..9dbde79f26a2 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -173,8 +173,7 @@
 	 * power domain.. which still isn't enough and forces us to bind
 	 * OXILI_CX and OXILI_GX together!
 	 */
-	vdd_gfx: s2@1700 {
-		reg = <0x1700 0x100>;
+	vdd_gfx: s2 {
 		regulator-name = "VDD_GFX";
 		regulator-min-microvolt = <980000>;
 		regulator-max-microvolt = <980000>;
@@ -482,7 +481,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	ts_reset_active: ts-reset-active-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 9ff9d35496d2..2831966be960 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -228,6 +228,11 @@
 			reg = <0 0xc9400000 0 0x3f00000>;
 			no-map;
 		};
+
+		reserved@6c00000 {
+			reg = <0 0x06c00000 0 0x400000>;
+			no-map;
+		};
 	};
 
 	smd {
@@ -242,7 +247,7 @@
 				compatible = "qcom,rpm-msm8994";
 				qcom,smd-channels = "rpm_requests";
 
-				rpmcc: rpmcc {
+				rpmcc: clock-controller {
 					compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
 					#clock-cells = <1>;
 				};
@@ -840,7 +845,6 @@
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			i2c5_default: i2c5-default-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
index 2994337c6046..2adadc1e5b7c 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -85,10 +85,6 @@
 	};
 };
 
-&adsp_pil {
-	status = "okay";
-};
-
 &blsp1_i2c3 {
 	status = "okay";
 
@@ -183,10 +179,6 @@
 	status = "okay";
 };
 
-&gpu {
-	status = "okay";
-};
-
 &hsusb_phy1 {
 	vdd-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
@@ -215,7 +207,6 @@
 
 &mss_pil {
 	pll-supply = <&vreg_l12a_1p8>;
-	status = "okay";
 };
 
 &pcie0 {
@@ -504,8 +495,48 @@
 	};
 };
 
-&slpi_pil {
+&slim_msm {
 	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		tasha_ifd: tas-ifd@0,0 {
+			compatible = "slim217,1a0";
+			reg = <0 0>;
+		};
+
+		wcd9335: codec@1,0 {
+			compatible = "slim217,1a0";
+			reg = <1 0>;
+
+			clock-names = "mclk", "slimbus";
+			clocks = <&div1_mclk>,
+				 <&rpmcc RPM_SMD_BB_CLK1>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+				     <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "intr1", "intr2";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			slim-ifc-dev = <&tasha_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			vdd-buck-supply = <&vreg_s4a_1p8>;
+			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+			vdd-tx-supply = <&vreg_s4a_1p8>;
+			vdd-rx-supply = <&vreg_s4a_1p8>;
+			vdd-io-supply = <&vreg_s4a_1p8>;
+		};
+	};
 };
 
 &sound {
@@ -768,19 +799,3 @@
 
 	maximum-speed = "high-speed";
 };
-
-&venus {
-	status = "okay";
-};
-
-&wcd9335 {
-	clock-names = "mclk", "slimbus";
-	clocks = <&div1_mclk>,
-		 <&rpmcc RPM_SMD_BB_CLK1>;
-
-	vdd-buck-supply = <&vreg_s4a_1p8>;
-	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
-	vdd-tx-supply = <&vreg_s4a_1p8>;
-	vdd-rx-supply = <&vreg_s4a_1p8>;
-	vdd-io-supply = <&vreg_s4a_1p8>;
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
index 1bdc1b134305..dfe75119b8d2 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
@@ -17,6 +17,7 @@
 
 &adsp_pil {
 	firmware-name = "qcom/msm8996/oneplus3/adsp.mbn";
+	status = "okay";
 };
 
 &battery {
@@ -25,6 +26,8 @@
 };
 
 &gpu {
+	status = "okay";
+
 	zap-shader {
 		firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn";
 	};
@@ -33,12 +36,15 @@
 &mss_pil {
 	firmware-name = "qcom/msm8996/oneplus3/mba.mbn",
 			"qcom/msm8996/oneplus3/modem.mbn";
+	status = "okay";
 };
 
 &slpi_pil {
 	firmware-name = "qcom/msm8996/oneplus3/slpi.mbn";
+	status = "okay";
 };
 
 &venus {
 	firmware-name = "qcom/msm8996/oneplus3/venus.mbn";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
index 34f837dd0c12..51fce65e89f1 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
@@ -18,6 +18,7 @@
 
 &adsp_pil {
 	firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn";
+	status = "okay";
 };
 
 &battery {
@@ -26,6 +27,8 @@
 };
 
 &gpu {
+	status = "okay";
+
 	zap-shader {
 		firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn";
 	};
@@ -34,12 +37,15 @@
 &mss_pil {
 	firmware-name = "qcom/msm8996/oneplus3t/mba.mbn",
 			"qcom/msm8996/oneplus3t/modem.mbn";
+	status = "okay";
 };
 
 &slpi_pil {
 	firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn";
+	status = "okay";
 };
 
 &venus {
 	firmware-name = "qcom/msm8996/oneplus3t/venus.mbn";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 2acfed28e3cb..1ce5df0a3405 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -12,8 +12,6 @@
 
 / {
 	clocks {
-		compatible = "simple-bus";
-
 		divclk1_cdc: divclk1 {
 			compatible = "gpio-gate-clock";
 			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
@@ -337,6 +335,52 @@
 	};
 };
 
+&slim_msm {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		tasha_ifd: tas-ifd@0,0 {
+			compatible = "slim217,1a0";
+			reg = <0 0>;
+		};
+
+		wcd9335: codec@1,0 {
+			compatible = "slim217,1a0";
+			reg = <1 0>;
+
+			clock-names = "mclk", "slimbus";
+			clocks = <&divclk1_cdc>,
+				 <&rpmcc RPM_SMD_BB_CLK1>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+				     <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "intr1", "intr2";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			slim-ifc-dev = <&tasha_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			vdd-buck-supply = <&vreg_s4a_1p8>;
+			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+			vdd-rx-supply = <&vreg_s4a_1p8>;
+			vdd-tx-supply = <&vreg_s4a_1p8>;
+			vdd-vbat-supply = <&vph_pwr>;
+			vdd-micbias-supply = <&vph_pwr_bbyp>;
+			vdd-io-supply = <&vreg_s4a_1p8>;
+		};
+	};
+};
+
 &slpi_pil {
 	status = "okay";
 
@@ -395,20 +439,6 @@
 	status = "okay";
 };
 
-&wcd9335 {
-	clock-names = "mclk", "slimbus";
-	clocks = <&divclk1_cdc>,
-		 <&rpmcc RPM_SMD_BB_CLK1>;
-
-	vdd-buck-supply = <&vreg_s4a_1p8>;
-	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
-	vdd-rx-supply = <&vreg_s4a_1p8>;
-	vdd-tx-supply = <&vreg_s4a_1p8>;
-	vdd-vbat-supply = <&vph_pwr>;
-	vdd-micbias-supply = <&vph_pwr_bbyp>;
-	vdd-io-supply = <&vreg_s4a_1p8>;
-};
-
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm8994-regulators";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 905678e7175d..2b35cb3f5292 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1552,7 +1552,6 @@
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			blsp2_i2c1_default: blsp2-i2c1-state {
@@ -1851,8 +1850,8 @@
 
 				#address-cells = <3>;
 				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+				ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
 
 				device_type = "pci";
 
@@ -1882,7 +1881,6 @@
 						"cfg",
 						"bus_master",
 						"bus_slave";
-
 			};
 
 			pcie1: pcie@608000 {
@@ -1905,8 +1903,8 @@
 
 				#address-cells = <3>;
 				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+				ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
 
 				device_type = "pci";
 
@@ -1956,8 +1954,8 @@
 
 				#address-cells = <3>;
 				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+				ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
 
 				device_type = "pci";
 
@@ -3006,8 +3004,11 @@
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,is-utmi-l1-suspend;
+				tx-fifo-resize;
 			};
 		};
 
@@ -3383,36 +3384,8 @@
 			dma-names = "rx", "tx";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			slim@1 {
-				reg = <1>;
-				#address-cells = <2>;
-				#size-cells = <0>;
-
-				tasha_ifd: tas-ifd@0,0 {
-					compatible = "slim217,1a0";
-					reg = <0 0>;
-				};
-
-				wcd9335: codec@1,0 {
-					pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
-					pinctrl-names = "default";
-
-					compatible = "slim217,1a0";
-					reg = <1 0>;
 
-					interrupt-parent = <&tlmm>;
-					interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
-						     <53 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "intr1", "intr2";
-					interrupt-controller;
-					#interrupt-cells = <1>;
-					reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
-
-					slim-ifc-dev = <&tasha_ifd>;
-
-					#sound-dai-cells = <1>;
-				};
-			};
+			status = "disabled";
 		};
 
 		adsp_pil: remoteproc@9300000 {
@@ -3496,7 +3469,6 @@
 						};
 					};
 				};
-
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index 5aad9f05780a..b35e2d9f428c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -44,7 +44,7 @@
 			label = "Keyboard Hall Sensor";
 			gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
 			debounce-interval = <15>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_KEYPAD_SLIDE>;
 		};
@@ -116,7 +116,7 @@
 			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_VOLUMEUP>;
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <15>;
 		};
 
@@ -640,7 +640,6 @@
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
-		input-enable;
 	};
 
 	ts_int_n: ts-int-n-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
index d36b36af49d0..fac8b3510cd3 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -34,7 +34,7 @@
 &pmi8998_gpios {
 	button_backlight_default: button-backlight-state {
 		pins = "gpio5";
-		function = "gpio";
+		function = "normal";
 		bias-pull-down;
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index ce03c7c239e5..062d56c42385 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -501,7 +501,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	ts_int_active: ts-int-active-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
index 1868ad649415..055b6a643d82 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -22,7 +22,7 @@
 		enable-active-high;
 		gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&disp_dvdd_en>;
+		pinctrl-0 = <&four_k_disp_dcdc_en>;
 	};
 };
 
@@ -37,8 +37,30 @@
 	qcom,soft-start-us = <200>;
 };
 
+&pm8005_gpios {
+	gpio-line-names = "EAR_EN", /* GPIO_1 */
+			  "NC",
+			  "SLB",
+			  "OPTION_1_PM8005";
+};
+
 &pmi8998_gpios {
-	disp_dvdd_en: disp-dvdd-en-active-state {
+	gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "TYPEC_UUSB_SEL",
+			  "VIB_LDO_EN",
+			  "NC",
+			  "DISPLAY_TYPE_SEL",
+			  "USB_SWITCH_SEL",
+			  "NC",
+			  "4K_DISP_DCDC_EN", /* GPIO_10 */
+			  "NC",
+			  "DIV_CLK3",
+			  "SPMI_I2C_SEL",
+			  "NC";
+
+	four_k_disp_dcdc_en: 4k-disp-dcdc-en-state {
 		pins = "gpio10";
 		function = "normal";
 		bias-disable;
@@ -49,6 +71,159 @@
 	};
 };
 
+&tlmm {
+	gpio-line-names = "", /* GPIO_0 */
+			  "",
+			  "",
+			  "",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "MDP_VSYNC_P", /* GPIO_10 */
+			  "RGBC_IR_INT",
+			  "NFC_VEN",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "NC",
+			  "NC",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "MAIN_CAM_PWR_EN",
+			  "TOF_INT_N",
+			  "NC",
+			  "NC",
+			  "CHAT_CAM_PWR_EN",
+			  "NC",
+			  "TOF_RESET_N",
+			  "CAM2_RSTN",
+			  "NC",
+			  "CAM1_RSTN", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "CC_DIR",
+			  "UIM2_DETECT_EN",
+			  "FP_RESET_N", /* GPIO_40 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_RXD",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "NC",
+			  "CODEC_INT2_N",
+			  "CODEC_INT1_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "TRAY2_DET_DS",
+			  "CODEC_RST_N",
+			  "WSA_L_EN",
+			  "WSA_R_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "LPASS_SLIMBUS_CLK", /* GPIO_70 */
+			  "LPASS_SLIMBUS_DATA0",
+			  "LPASS_SLIMBUS_DATA1",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_80 */
+			  "SW_SERVICE",
+			  "TX_GTR_THRES_IN",
+			  "HW_ID0",
+			  "HW_ID1",
+			  "NC",
+			  "NC",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NFC_IRQ",
+			  "NFC_DWLD_EN",
+			  "DISP_RESET_N",
+			  "TRAY2_DET",
+			  "CAM_SOF",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "DEBUG_GPIO0",
+			  "DEBUG_GPIO1", /* GPIO_100 */
+			  "GRFC4",
+			  "NC",
+			  "NC",
+			  "RSVD",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RST",
+			  "UIM1_PRESENT",
+			  "UIM_BATT_ALARM",
+			  "RSVD",
+			  "NC",
+			  "NC",
+			  "ACCEL_INT",
+			  "GYRO_INT",
+			  "COMPASS_INT",
+			  "ALS_PROX_INT_N", /* GPIO_120 */
+			  "FP_INT_N",
+			  "NC",
+			  "BAROMETER_INT",
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "NC",
+			  "NC",
+			  "USB_DETECT_EN",
+			  "NC",
+			  "QLINK_REQUEST", /* GPIO_130 */
+			  "QLINK_ENABLE",
+			  "NC",
+			  "TS_VDDIO_EN",
+			  "WMSS_RESET_N",
+			  "PA_INDICATOR_OR",
+			  "NC",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK", /* GPIO_140 */
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD",
+			  "RFFE2_DATA",
+			  "RFFE2_CLK",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
+
 &vreg_l22a_2p85 {
 	regulator-min-microvolt = <2704000>;
 	regulator-max-microvolt = <2704000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 820414758888..687e96068cb2 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -21,7 +21,7 @@
 	clocks {
 		div1_mclk: divclk1 {
 			compatible = "gpio-gate-clock";
-			pinctrl-0 = <&audio_mclk_pin>;
+			pinctrl-0 = <&div_clk1>;
 			pinctrl-names = "default";
 			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
 			#clock-cells = <0>;
@@ -46,7 +46,7 @@
 		enable-active-high;
 		gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&cam0_vdig_default>;
+		pinctrl-0 = <&main_cam_pwr_en>;
 	};
 
 	cam1_vdig_vreg: cam1-vdig {
@@ -56,7 +56,7 @@
 		enable-active-high;
 		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&cam1_vdig_default>;
+		pinctrl-0 = <&chat_cam_pwr_en>;
 		vin-supply = <&vreg_s3a_1p35>;
 	};
 
@@ -67,7 +67,7 @@
 		enable-active-high;
 		gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&cam_vio_default>;
+		pinctrl-0 = <&main_cam_pwr_io_en>;
 		vin-supply = <&vreg_lvs1a_1p8>;
 	};
 
@@ -92,21 +92,20 @@
 		id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
 		vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&usb_extcon_active &usb_vbus_active>;
+		pinctrl-0 = <&cc_dir_default &usb_detect_en>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "Side buttons";
 		pinctrl-names = "default";
-		pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
-			    <&cam_snapshot_pin_a>;
+		pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
 		button-vol-down {
 			label = "Volume Down";
 			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_VOLUMEDOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <15>;
 		};
 
@@ -131,14 +130,14 @@
 		compatible = "gpio-keys";
 		label = "Hall sensors";
 		pinctrl-names = "default";
-		pinctrl-0 = <&hall_sensor0_default>;
+		pinctrl-0 = <&acc_cover_open>;
 
 		event-hall-sensor0 {
 			label = "Cover Hall Sensor";
 			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <30>;
 		};
 	};
@@ -189,7 +188,7 @@
 		compatible = "gpio-vibrator";
 		enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vib_default>;
+		pinctrl-0 = <&vib_ldo_en>;
 	};
 };
 
@@ -263,7 +262,7 @@
 		vdd-supply = <&cam_vio_vreg>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&tof_int &tof_reset>;
+		pinctrl-0 = <&tof_int_n &tof_reset>;
 	};
 };
 
@@ -292,6 +291,13 @@
 	regulator-soft-start;
 };
 
+&pm8005_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "SLB",
+			  "OPTION_1_PM8005";
+};
+
 &pm8005_regulators {
 	/* VDD_GFX supply */
 	pm8005_s1: s1 {
@@ -304,7 +310,34 @@
 };
 
 &pm8998_gpios {
-	vol_down_pin_a: vol-down-active-state {
+	gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */
+			  "NC",
+			  "WLAN_SW_CTRL (DISALLOWED)",
+			  "SSC_PWR_EN",
+			  "VOL_DOWN_N",
+			  "VOL_UP_N",
+			  "SNAPSHOT_N",
+			  "FOCUS_N",
+			  "FLASH_THERM",
+			  "", /* GPIO_10 */
+			  "",
+			  "",
+			  "DIV_CLK1",
+			  "NC",
+			  "NC (DISALLOWED)",
+			  "DIV_CLK3",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC (DISALLOWED)", /* GPIO_20 */
+			  "NFC_CLK_REQ",
+			  "NC (DISALLOWED)",
+			  "WCSS_PWR_REQ",
+			  "OPTION_1 (DISALLOWED)",
+			  "OPTION_2 (DISALLOWED)",
+			  "PM_SLB (DISALLOWED)";
+
+	vol_down_n: vol-down-n-state {
 		pins = "gpio5";
 		function = PMIC_GPIO_FUNC_NORMAL;
 		bias-pull-up;
@@ -312,7 +345,7 @@
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
 
-	cam_focus_pin_a: cam-focus-btn-active-state {
+	focus_n: focus-n-state {
 		pins = "gpio7";
 		function = PMIC_GPIO_FUNC_NORMAL;
 		bias-pull-up;
@@ -320,7 +353,7 @@
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
 
-	cam_snapshot_pin_a: cam-snapshot-btn-active-state {
+	snapshot_n: snapshot-n-state {
 		pins = "gpio8";
 		function = PMIC_GPIO_FUNC_NORMAL;
 		bias-pull-up;
@@ -328,7 +361,7 @@
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
 
-	audio_mclk_pin: audio-mclk-pin-active-state {
+	div_clk1: div-clk1-state {
 		pins = "gpio13";
 		function = "func2";
 		power-source = <0>;
@@ -336,7 +369,22 @@
 };
 
 &pmi8998_gpios {
-	cam_vio_default: cam-vio-active-state {
+	gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "TYPEC_UUSB_SEL",
+			  "VIB_LDO_EN",
+			  "NC",
+			  "DISPLAY_TYPE_SEL",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "DIV_CLK3",
+			  "SPMI_I2C_SEL",
+			  "NC";
+
+	main_cam_pwr_io_en: main-cam-pwr-io-en-state {
 		pins = "gpio1";
 		function = PMIC_GPIO_FUNC_NORMAL;
 		bias-disable;
@@ -346,7 +394,7 @@
 		power-source = <1>;
 	};
 
-	vib_default: vib-en-state {
+	vib_ldo_en: vib-ldo-en-state {
 		pins = "gpio5";
 		function = PMIC_GPIO_FUNC_NORMAL;
 		bias-disable;
@@ -590,8 +638,158 @@
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
-
-	mdp_vsync_n: mdp-vsync-n-state {
+	gpio-line-names = "", /* GPIO_0 */
+			  "",
+			  "",
+			  "",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "MDP_VSYNC_P", /* GPIO_10 */
+			  "RGBC_IR_INT",
+			  "NFC_VEN",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "NC",
+			  "NC",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "MAIN_CAM_PWR_EN",
+			  "TOF_INT_N",
+			  "NC",
+			  "NC",
+			  "CHAT_CAM_PWR_EN",
+			  "NC",
+			  "TOF_RESET_N",
+			  "CAM2_RSTN",
+			  "NC",
+			  "CAM1_RSTN", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "CC_DIR",
+			  "UIM2_DETECT_EN",
+			  "FP_RESET_N", /* GPIO_40 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_RXD",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "NC",
+			  "CODEC_INT2_N",
+			  "CODEC_INT1_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "TRAY2_DET_DS",
+			  "CODEC_RST_N",
+			  "WSA_L_EN",
+			  "WSA_R_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "LPASS_SLIMBUS_CLK", /* GPIO_70 */
+			  "LPASS_SLIMBUS_DATA0",
+			  "LPASS_SLIMBUS_DATA1",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_80 */
+			  "SW_SERVICE",
+			  "TX_GTR_THRES_IN",
+			  "HW_ID0",
+			  "HW_ID1",
+			  "NC",
+			  "NC",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NFC_IRQ",
+			  "NFC_DWLD_EN",
+			  "DISP_RESET_N",
+			  "TRAY2_DET",
+			  "CAM_SOF",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "DEBUG_GPIO0",
+			  "DEBUG_GPIO1", /* GPIO_100 */
+			  "GRFC4",
+			  "NC",
+			  "NC",
+			  "RSVD",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RST",
+			  "UIM1_PRESENT",
+			  "UIM_BATT_ALARM",
+			  "RSVD",
+			  "NC",
+			  "NC",
+			  "ACCEL_INT",
+			  "GYRO_INT",
+			  "COMPASS_INT",
+			  "ALS_PROX_INT_N", /* GPIO_120 */
+			  "FP_INT_N",
+			  "NC",
+			  "BAROMETER_INT",
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "NC",
+			  "NC",
+			  "USB_DETECT_EN",
+			  "NC",
+			  "QLINK_REQUEST", /* GPIO_130 */
+			  "QLINK_ENABLE",
+			  "NC",
+			  "NC",
+			  "WMSS_RESET_N",
+			  "PA_INDICATOR_OR",
+			  "NC",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK", /* GPIO_140 */
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD",
+			  "RFFE2_DATA",
+			  "RFFE2_CLK",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+
+	mdp_vsync_p: mdp-vsync-p-state {
 		pins = "gpio10";
 		function = "mdp_vsync_a";
 		drive-strength = <2>;
@@ -606,14 +804,14 @@
 		output-low;
 	};
 
-	msm_mclk0_default: msm-mclk0-active-state {
+	cam_mclk0_active: cam-mclk0-active-state {
 		pins = "gpio13";
 		function = "cam_mclk";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	msm_mclk1_default: msm-mclk1-active-state {
+	cam_mclk1_active: cam-mclk1-active-state {
 		pins = "gpio14";
 		function = "cam_mclk";
 		drive-strength = <2>;
@@ -634,48 +832,46 @@
 		drive-strength = <2>;
 	};
 
-	cam0_vdig_default: cam0-vdig-default-state {
+	main_cam_pwr_en: main-cam-pwr-en-default-state {
 		pins = "gpio21";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	tof_int: tof-int-state {
+	tof_int_n: tof-int-n-state {
 		pins = "gpio22";
 		function = "gpio";
 		bias-pull-up;
 		drive-strength = <2>;
-		input-enable;
 	};
 
-	cam1_vdig_default: cam1-vdig-default-state {
+	chat_cam_pwr_en: chat-cam-pwr-en-default-state {
 		pins = "gpio25";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	usb_extcon_active: usb-extcon-active-state {
-		pins = "gpio38";
+	tof_reset: tof-reset-state {
+		pins = "gpio27";
 		function = "gpio";
 		bias-disable;
-		drive-strength = <16>;
+		drive-strength = <2>;
 	};
 
-	tof_reset: tof-reset-state {
-		pins = "gpio27";
+	cc_dir_default: cc-dir-active-state {
+		pins = "gpio38";
 		function = "gpio";
 		bias-disable;
-		drive-strength = <2>;
+		drive-strength = <16>;
 	};
 
-	hall_sensor0_default: acc-cover-open-state {
+	acc_cover_open: acc-cover-open-state {
 		pins = "gpio124";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
-		input-enable;
 	};
 
 	ts_int_n: ts-int-n-state {
@@ -685,7 +881,7 @@
 		bias-pull-up;
 	};
 
-	usb_vbus_active: usb-vbus-active-state {
+	usb_detect_en: usb-detect-en-active-state {
 		pins = "gpio128";
 		function = "gpio";
 		bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
index 7956b151c7a4..2444b87fddf7 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
@@ -528,7 +528,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	mdss_dsi_active_state: mdss-dsi-active-state {
@@ -620,7 +619,6 @@
 		function = "gpio";
 		drive-strength = <16>;
 		bias-pull-up;
-		input-enable;
 	};
 
 	ts_int_suspend_state: ts-int-suspend-state {
@@ -642,7 +640,6 @@
 		function = "gpio";
 		bias-pull-down;
 		drive-strength = <2>;
-		input-enable;
 	};
 
 	wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 8bc1c59127e5..b150437a8355 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -922,7 +922,7 @@
 			phy-names = "pciephy";
 			status = "disabled";
 
-			ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
 
 			#interrupt-cells = <1>;
@@ -1524,7 +1524,7 @@
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0x06002000 0x1000>,
 			      <0x16280000 0x180000>;
-			reg-names = "stm-base", "stm-data-base";
+			reg-names = "stm-base", "stm-stimulus-base";
 			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
@@ -1993,7 +1993,6 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
-			cell-index = <0>;
 		};
 
 		usb3: usb@a8f8800 {
@@ -2490,7 +2489,8 @@
 		};
 
 		apcs_glb: mailbox@17911000 {
-			compatible = "qcom,msm8998-apcs-hmss-global";
+			compatible = "qcom,msm8998-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
 			reg = <0x17911000 0x1000>;
 
 			#mbox-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm2250.dtsi
new file mode 100644
index 000000000000..5f1d15db5c99
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm2250.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm2250", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+
+			pm2250_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				debounce = <15625>;
+				bias-pull-up;
+			};
+
+			pm2250_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm2250_gpios: gpio@c000 {
+			compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm2250_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm2250", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
index fc0eccaccdf6..4bc717917f44 100644
--- a/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -11,7 +11,7 @@
 
 / {
 	thermal-zones {
-		pm660 {
+		pm660-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
index f9b3864bd3b9..87b71b7205b8 100644
--- a/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -11,7 +11,7 @@
 
 / {
 	thermal-zones {
-		pm660l {
+		pm660l-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index 135bfb8d629b..cca45fad75ac 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -116,6 +116,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8150l_flash: led-controller@d300 {
+			compatible = "qcom,pm8150l-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
 		pm8150l_lpg: pwm {
 			compatible = "qcom,pm8150l-lpg";
 
diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
index 16bcfb64d735..72609f31c890 100644
--- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
@@ -55,5 +55,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pm8550b_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,pm8550b-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index e2a6b66d8847..f4fb1a92ab55 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -41,7 +41,7 @@
 			};
 		};
 
-		pm8916_usbin: extcon@1300 {
+		pm8916_usbin: usb-detect@1300 {
 			compatible = "qcom,pm8941-misc";
 			reg = <0x1300>;
 			interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>;
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index adbba9f4089a..340033ac3186 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -72,7 +72,7 @@
 		};
 
 		pm8998_coincell: charger@2800 {
-			compatible = "qcom,pm8941-coincell";
+			compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell";
 			reg = <0x2800>;
 
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index a0af91698d49..0192968f4d9b 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -49,8 +49,6 @@
 
 		pmi8994_spmi_regulators: regulators {
 			compatible = "qcom,pmi8994-regulators";
-			#address-cells = <1>;
-			#size-cells = <1>;
 		};
 
 		pmi8994_wled: wled@d800 {
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
new file mode 100644
index 000000000000..ae5abc76bcc7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -0,0 +1,1561 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ *
+ * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-qcm2290", "qcom,scm";
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x40000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: xbl-aop@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: sec-apps@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: smem@46000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		pil_modem_mem: modem@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x6900000>;
+			no-map;
+		};
+
+		pil_video_mem: video@51400000 {
+			reg = <0x0 0x51400000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@51900000 {
+			reg = <0x0 0x51900000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_adsp_mem: adsp@51a00000 {
+			reg = <0x0 0x51a00000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: ipa-fw@53600000 {
+			reg = <0x0 0x53600000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: ipa-gsi@53610000 {
+			reg = <0x0 0x53610000 0x0 0x5000>;
+			no-map;
+		};
+
+		pil_gpu_mem: zap@53615000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x53615000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_memory: framebuffer@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_memory: dpfs-data@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		removed_mem: reserved@60000000 {
+			reg = <0x0 0x60000000 0x0 0x3900000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@89b01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x89b01000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-qcm2290";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmpd: power-controller {
+				compatible = "qcom,qcm2290-rpmpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmpd_opp_table>;
+
+				rpmpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmpd_opp_min_svs: opp1 {
+						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					};
+
+					rpmpd_opp_low_svs: opp2 {
+						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					};
+
+					rpmpd_opp_svs: opp3 {
+						opp-level = <RPM_SMD_LEVEL_SVS>;
+					};
+
+					rpmpd_opp_svs_plus: opp4 {
+						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					};
+
+					rpmpd_opp_nom: opp5 {
+						opp-level = <RPM_SMD_LEVEL_NOM>;
+					};
+
+					rpmpd_opp_nom_plus: opp6 {
+						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					};
+
+					rpmpd_opp_turbo: opp7 {
+						opp-level = <RPM_SMD_LEVEL_TURBO>;
+					};
+
+					rpmpd_opp_turbo_plus: opp8 {
+						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wlan_smp2p_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x00340000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,qcm2290-tlmm";
+			reg = <0x0 0x00500000 0x0 0x300000>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 127>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1","gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio71", "gpio80";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio12", "gpio13", "gpio96", "gpio97";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart0_default: qup-uart0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart4_default: qup-uart4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-qcm2290";
+			reg = <0x0 0x01400000 0x0 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		usb_hsphy: phy@1613000 {
+			compatible = "qcom,qcm2290-qusb2-phy";
+			reg = <0x0 0x01613000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		qfprom@1b44000 {
+			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
+			reg = <0x0 0x01b44000 0x0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x01c40000 0x0 0x1100>,
+			      <0x0 0x01e00000 0x0 0x2000000>,
+			      <0x0 0x03e00000 0x0 0x100000>,
+			      <0x0 0x03f00000 0x0 0xa0000>,
+			      <0x0 0x01c0a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tsens0: thermal-sensor@4411000 {
+			compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x04411000 0x0 0x1ff>,
+			      <0x0 0x04410000 0x0 0x8>;
+			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		rng: rng@4453000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x0 0x04453000 0x0 0x1000>;
+			clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
+			clock-names = "core";
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x0 0x045f0000 0x0 0x7000>;
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x0 0x04690000 0x0 0x10000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x04744000 0x0 0x1000>,
+			      <0x0 0x04745000 0x0 0x1000>,
+			      <0x0 0x04748000 0x0 0x8000>;
+			reg-names = "hc",
+				    "cqhci",
+				    "ice";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo",
+				      "ice";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+			iommus = <&apps_smmu 0xc0 0x0>;
+
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040868>;
+			bus-width = <8>;
+
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x04784000 0x0 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0xa0 0x0>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x04a00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels =  <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0xe3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c0_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart0: serial@4a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@4a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@4a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@4a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c5: i2c@4a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb: usb@4ef8800 {
+			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
+			reg = <0x0 0x04ef8800 0x0 0x400>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			wakeup-source;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x04e00000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_hsphy>;
+				phy-names = "usb2-phy";
+				iommus = <&apps_smmu 0x120 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				maximum-speed = "super-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		remoteproc_mpss: remoteproc@6080000 {
+			compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
+			reg = <0x0 0x06080000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 12>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@ab00000 {
+			compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
+			reg = <0x0 0x0ab00000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
+					<&rpmpd QCM2290_VDD_LPI_MX>;
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 8>;
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x0c600000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0x0 0x0c800000 0x0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x1a0 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		watchdog@f017000 {
+			compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
+			reg = <0x0 0x0f017000 0x0 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sleep_clk>;
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,qcm2290-apcs-hmss-global";
+			reg = <0x0 0x0f111000 0x0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x0f120000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x0f121000 0x8000>;
+
+			frame@0 {
+				reg = <0x0 0x1000>,
+				      <0x1000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@2000 {
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@3000 {
+				reg = <0x3000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@4000 {
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@5000 {
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@6000 {
+				reg = <0x6000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@7000 {
+				reg = <0x7000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f200000 0x0 0x10000>,
+			      <0x0 0x0f300000 0x0 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		cpufreq_hw: cpufreq@f521000 {
+			compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0x0 0x0f521000 0x0 0x1000>;
+			reg-names = "freq-domain0";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		mapss-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				mapss_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss_crit: mapss-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_crit: video-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wlan_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wlan_crit: wlan-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss0_crit: cpuss0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_crit: cpuss1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				mdm0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm0_crit: mdm0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				mdm1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm1_crit: mdm1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		hm-center-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				hm_center_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				hm_center_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				hm_center_crit: hm-center-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_crit: camera-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 04c82d1624eb..10655401528e 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -296,7 +296,6 @@
 
 		drive-strength = <2>;
 		bias-pull-up;
-		input-enable;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index bc2ed73afb74..eefed585738c 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1302,7 +1302,8 @@
 		};
 
 		apcs_glb: mailbox@b011000 {
-			compatible = "qcom,qcs404-apcs-apps-global", "syscon";
+			compatible = "qcom,qcs404-apcs-apps-global",
+				     "qcom,msm8916-apcs-kpss-global", "syscon";
 			reg = <0x0b011000 0x1000>;
 			#mbox-cells = <1>;
 			clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
@@ -1469,8 +1470,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0          0x10003000 0 0x00010000>, /* I/O */
-				 <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */
+			ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */
+				 <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */
 
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index f234159d2060..734438113bba 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -27,6 +27,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
@@ -45,6 +46,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD1>;
 			power-domain-names = "psci";
@@ -60,6 +62,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD2>;
 			power-domain-names = "psci";
@@ -75,6 +78,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD3>;
 			power-domain-names = "psci";
@@ -412,8 +416,6 @@
 				pinctrl-0 = <&qup_uart0_default>;
 				pinctrl-names = "default";
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -581,8 +583,6 @@
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				pinctrl-names = "default";
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 		};
@@ -1312,6 +1312,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		gem_noc: interconnect@19100000 {
@@ -1320,6 +1321,18 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 			#interconnect-cells = <2>;
 		};
+
+		system-cache-controller@19200000 {
+			compatible = "qcom,qdu1000-llcc";
+			reg = <0 0x19200000 0 0xd80000>,
+			      <0 0x1a200000 0 0x80000>,
+			      <0 0x221c8128 0 0x4>;
+			reg-names = "llcc_base",
+				    "llcc_broadcast_base",
+				    "multi_channel_register";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			multi-ch-bit-off = <24 2>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
new file mode 100644
index 000000000000..ef3616093289
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ */
+
+/dts-v1/;
+
+#include "qcm2290.dtsi"
+#include "pm2250.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB1";
+	compatible = "qcom,qrb2210-rb1", "qcom,qrb2210", "qcom,qcm2290";
+
+	aliases {
+		serial0 = &uart0;
+		sdhc1 = &sdhc_1;
+		sdhc2 = &sdhc_2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&key_volp_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+};
+
+&pm2250_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+	non-removable;
+	supports-cqe;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_state_on &sd_det_in_on>;
+	pinctrl-1 = <&sdc2_state_off &sd_det_in_off>;
+	pinctrl-names = "default", "sleep";
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	sd_det_in_on: sd-det-in-on-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sd_det_in_off: sd-det-in-off-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	key_volp_n: key-volp-n-state {
+		pins = "gpio96";
+		function = "gpio";
+		bias-pull-up;
+		output-disable;
+	};
+};
+
+/* UART connected to the Micro-USB port via a FTDI chip */
+&uart0 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_hsphy {
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
new file mode 100644
index 000000000000..dc80f0bca767
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QRB4210 RB2";
+	compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>;
+		vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>;
+		vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>;
+		vdd-l6-l8-supply = <&vreg_s5a_0p848>;
+		vdd-l9-l11-supply = <&vreg_s7a_2p04>;
+		vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>;
+		vdd-l12-l16-supply = <&vreg_s7a_2p04>;
+		vdd-l23-l24-supply = <&vph_pwr>;
+
+		vreg_s5a_0p848: s5 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s6a_1p352: s6 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a_2p04: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2080000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a_0p9: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_2p96: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		vreg_l6a_0p6: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a_1p256: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a_0p664: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a_1p8: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a_1p8: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a_3p128: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a_1p3: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1384000>;
+		};
+
+		vreg_l18a_1p232: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1312000>;
+		};
+
+		vreg_l19a_1p8: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a_1p8: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a_2p704: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		vreg_l22a_2p96: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		vreg_l24a_2p96: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&vreg_l24a_2p96>;
+	vqmmc-supply = <&vreg_l11a_1p8>;
+	no-sdio;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
+	vmmc-supply = <&vreg_l22a_2p96>;
+	vqmmc-supply = <&vreg_l5a_2p96>;
+	no-sdio;
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <37 5>, <43 2>, <47 1>,
+			       <49 1>, <52 1>, <54 1>,
+			       <56 3>, <61 2>, <64 1>,
+			       <68 1>, <72 8>, <96 1>;
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index aa0a7bd7307c..dd924331b0ee 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1012,7 +1012,7 @@
 	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
-		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrLeft";
 		#sound-dai-cells = <0>;
@@ -1021,7 +1021,7 @@
 	right_spkr: speaker@0,4 {
 		compatible = "sdw10217211000";
 		reg = <0 4>;
-		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrRight";
 		#sound-dai-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 459384ec8f23..339fea522509 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -17,6 +17,7 @@
 
 	aliases {
 		serial0 = &uart2;
+		serial1 = &uart9;
 	};
 
 	chosen {
@@ -400,6 +401,10 @@
 	status = "okay";
 };
 
+&uart9 {
+	status = "okay";
+};
+
 &ufs_mem_hc {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index 3ccb5ffdb3ca..24fa449d48a6 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -241,7 +241,7 @@
 };
 
 &remoteproc_nsp0 {
-	firmware-name = "qcom/sa8540p/cdsp.mbn";
+	firmware-name = "qcom/sa8540p/cdsp0.mbn";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
new file mode 100644
index 000000000000..7602cca47bae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmm8654au_0_thermal: pm8775-0-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_0_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmm8654au_1_thermal: pm8775-1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_1_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmm8654au_2_thermal: pm8775-2-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_2_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmm8654au_3_thermal: pm8775-3-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_3_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmm8654au_0: pmic@0 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_0_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_0_pon: pon@1200 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1200>, <0x800>;
+			reg-names = "hlos", "pbs";
+			mode-recovery = <0x1>;
+			mode-bootloader = <0x2>;
+
+			pmm8654au_0_pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				debounce = <15625>;
+			};
+
+			pmm8654au_0_pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts-extended = <&spmi_bus 0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				status = "disabled";
+			};
+		};
+
+		pmm8654au_0_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_0_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8654au_1: pmic@2 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_1_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8654au_2: pmic@4 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_2_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_2_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8654au_3: pmic@6 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_3_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_3_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_3_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
new file mode 100644
index 000000000000..f238a02a5448
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sa8775p.dtsi"
+#include "sa8775p-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SA8775P Ride";
+	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
+
+	aliases {
+		serial0 = &uart10;
+		serial1 = &uart12;
+		serial2 = &uart17;
+		i2c18 = &i2c18;
+		spi16 = &spi16;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1816000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1996000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/*
+			 * FIXME: This should have regulator-allow-set-load but
+			 * we're getting an over-current fault from the PMIC
+			 * when switching to LPM.
+			 */
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e: smps4 {
+			regulator-name = "vreg_s4e";
+			regulator-min-microvolt = <970000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7e: smps7 {
+			regulator-name = "vreg_s7e";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9e: smps9 {
+			regulator-name = "vreg_s9e";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <570000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c18 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&qup_i2c18_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pmm8654au_0_gpios {
+	gpio-line-names = "DS_EN",
+			  "POFF_COMPLETE",
+			  "UFS0_VER_ID",
+			  "FAST_POFF",
+			  "DBU1_PON_DONE",
+			  "AOSS_SLEEP",
+			  "CAM_DES0_EN",
+			  "CAM_DES1_EN",
+			  "CAM_DES2_EN",
+			  "CAM_DES3_EN",
+			  "UEFI",
+			  "ANALOG_PON_OPT";
+};
+
+&pmm8654au_1_gpios {
+	gpio-line-names = "PMIC_C_ID0",
+			  "PMIC_C_ID1",
+			  "UFS1_VER_ID",
+			  "IPA_PWR",
+			  "",
+			  "WLAN_DBU4_EN",
+			  "WLAN_EN",
+			  "BT_EN",
+			  "USB2_PWR_EN",
+			  "USB2_FAULT";
+};
+
+&pmm8654au_2_gpios {
+	gpio-line-names = "PMIC_E_ID0",
+			  "PMIC_E_ID1",
+			  "USB0_PWR_EN",
+			  "USB0_FAULT",
+			  "SENSOR_IRQ_1",
+			  "SENSOR_IRQ_2",
+			  "SENSOR_RST",
+			  "SGMIIO0_RST",
+			  "SGMIIO1_RST",
+			  "USB1_PWR_ENABLE",
+			  "USB1_FAULT",
+			  "VMON_SPX8";
+};
+
+&pmm8654au_3_gpios {
+	gpio-line-names = "PMIC_G_ID0",
+			  "PMIC_G_ID1",
+			  "GNSS_RST",
+			  "GNSS_EN",
+			  "GNSS_BOOT_MODE";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&spi16 {
+	pinctrl-0 = <&qup_spi16_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tlmm {
+	qup_uart10_default: qup-uart10-state {
+		pins = "gpio46", "gpio47";
+		function = "qup1_se3";
+	};
+
+	qup_spi16_default: qup-spi16-state {
+		pins = "gpio86", "gpio87", "gpio88", "gpio89";
+		function = "qup2_se2";
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	qup_i2c18_default: qup-i2c18-state {
+		pins = "gpio95", "gpio96";
+		function = "qup2_se4";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart12_default: qup-uart12-state {
+		qup_uart12_cts: qup-uart12-cts-pins {
+			pins = "gpio52";
+			function = "qup1_se5";
+			bias-disable;
+		};
+
+		qup_uart12_rts: qup-uart12-rts-pins {
+			pins = "gpio53";
+			function = "qup1_se5";
+			bias-pull-down;
+		};
+
+		qup_uart12_tx: qup-uart12-tx-pins {
+			pins = "gpio54";
+			function = "qup1_se5";
+			bias-pull-up;
+		};
+
+		qup_uart12_rx: qup-uart12-rx-pins {
+			pins = "gpio55";
+			function = "qup1_se5";
+			bias-pull-down;
+		};
+	};
+
+	qup_uart17_default: qup-uart17-state {
+		qup_uart17_cts: qup-uart17-cts-pins {
+			pins = "gpio91";
+			function = "qup2_se3";
+			bias-disable;
+		};
+
+		qup_uart17_rts: qup0-uart17-rts-pins {
+			pins = "gpio92";
+			function = "qup2_se3";
+			bias-pull-down;
+		};
+
+		qup_uart17_tx: qup0-uart17-tx-pins {
+			pins = "gpio93";
+			function = "qup2_se3";
+			bias-pull-up;
+		};
+
+		qup_uart17_rx: qup0-uart17-rx-pins {
+			pins = "gpio94";
+			function = "qup2_se3";
+			bias-pull-down;
+		};
+	};
+};
+
+&uart10 {
+	compatible = "qcom,geni-debug-uart";
+	pinctrl-0 = <&qup_uart10_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart12 {
+	pinctrl-0 = <&qup_uart12_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart17 {
+	pinctrl-0 = <&qup_uart17_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
new file mode 100644
index 000000000000..2343df7e0ea4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -0,0 +1,981 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_1>;
+				L3_1: l3-cache {
+					compatible = "cache";
+				};
+
+			};
+		};
+
+		CPU5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_5>;
+			L2_5: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_1>;
+			};
+		};
+
+		CPU6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_6>;
+			L2_6: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_1>;
+			};
+		};
+
+		CPU7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_7>;
+			L2_7: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sa8775p", "qcom,scm";
+		};
+	};
+
+	aggre1_noc: interconnect-aggre1-noc {
+		compatible = "qcom,sa8775p-aggre1-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	aggre2_noc: interconnect-aggre2-noc {
+		compatible = "qcom,sa8775p-aggre2-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	clk_virt: interconnect-clk-virt {
+		compatible = "qcom,sa8775p-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	config_noc: interconnect-config-noc {
+		compatible = "qcom,sa8775p-config-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	dc_noc: interconnect-dc-noc {
+		compatible = "qcom,sa8775p-dc-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	gem_noc: interconnect-gem-noc {
+		compatible = "qcom,sa8775p-gem-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	gpdsp_anoc: interconnect-gpdsp-anoc {
+		compatible = "qcom,sa8775p-gpdsp-anoc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	lpass_ag_noc: interconnect-lpass-ag-noc {
+		compatible = "qcom,sa8775p-lpass-ag-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sa8775p-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mmss_noc: interconnect-mmss-noc {
+		compatible = "qcom,sa8775p-mmss-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspa_noc: interconnect-nspa-noc {
+		compatible = "qcom,sa8775p-nspa-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspb_noc: interconnect-nspb-noc {
+		compatible = "qcom,sa8775p-nspb-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	pcie_anoc: interconnect-pcie-anoc {
+		compatible = "qcom,sa8775p-pcie-anoc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	system_noc: interconnect-system-noc {
+		compatible = "qcom,sa8775p-system-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	/* Will be updated by the bootloader. */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sail_ss_mem: sail-ss@80000000 {
+			reg = <0x0 0x80000000 0x0 0x10000000>;
+			no-map;
+		};
+
+		hyp_mem: hyp@90000000 {
+			reg = <0x0 0x90000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_boot_mem: xbl-boot@90600000 {
+			reg = <0x0 0x90600000 0x0 0x200000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@90800000 {
+			reg = <0x0 0x90800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@90860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x90860000 0x0 0x20000>;
+			no-map;
+		};
+
+		uefi_log: uefi-log@908b0000 {
+			reg = <0x0 0x908b0000 0x0 0x10000>;
+			no-map;
+		};
+
+		reserved_mem: reserved@908f0000 {
+			reg = <0x0 0x908f0000 0x0 0xf000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@908ff000 {
+			reg = <0x0 0x908ff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: smem@90900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x90900000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		cpucp_fw_mem: cpucp-fw@90b00000 {
+			reg = <0x0 0x90b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		lpass_machine_learning_mem: lpass-machine-learning@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0xf00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x800000>;
+			no-map;
+		};
+
+		pil_camera_mem: pil-camera@95200000 {
+			reg = <0x0 0x95200000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@95c00000 {
+			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp0_mem: pil-gdsp0@97b00000 {
+			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp1_mem: pil-gdsp1@99900000 {
+			reg = <0x0 0x99900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cdsp0_mem: pil-cdsp0@9b800000 {
+			reg = <0x0 0x9b800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gpu_mem: pil-gpu@9d600000 {
+			reg = <0x0 0x9d600000 0x0 0x2000>;
+			no-map;
+		};
+
+		pil_cdsp1_mem: pil-cdsp1@9d700000 {
+			reg = <0x0 0x9d700000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cvp_mem: pil-cvp@9f500000 {
+			reg = <0x0 0x9f500000 0x0 0x700000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@9fc00000 {
+			reg = <0x0 0x9fc00000 0x0 0x700000>;
+			no-map;
+		};
+
+		hyptz_reserved_mem: hyptz-reserved@beb00000 {
+			reg = <0x0 0xbeb00000 0x0 0x11500000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@d0000000 {
+			reg = <0x0 0xd0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@d0100000 {
+			reg = <0x0 0xd0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@d1300000 {
+			reg = <0x0 0xd1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@d1800000 {
+			reg = <0x0 0xd1800000 0x0 0x3900000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sa8775p-gcc";
+			reg = <0x0 0x00100000 0x0 0xc7018>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SA8775P_CX>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
+			reg = <0x0 0x00408000 0x0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x5a3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart17: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x0088c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x443 0x0>;
+			status = "disabled";
+
+			uart10: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interconnect-names = "qup-core", "qup-config";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0
+						 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0
+						 &config_noc SLAVE_QUP_1 0>;
+				power-domains = <&rpmhpd SA8775P_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			uart12: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 40>,
+					  <40 140 14>,
+					  <54 263 1>,
+					  <55 306 4>,
+					  <59 312 3>,
+					  <62 374 2>,
+					  <64 434 2>,
+					  <66 438 2>,
+					  <70 520 1>,
+					  <73 523 1>,
+					  <118 568 6>,
+					  <124 609 3>,
+					  <159 638 1>,
+					  <160 720 3>,
+					  <169 728 30>,
+					  <199 416 2>,
+					  <201 449 1>,
+					  <202 89 1>,
+					  <203 451 1>,
+					  <204 462 1>,
+					  <205 264 1>,
+					  <206 579 1>,
+					  <207 653 1>,
+					  <208 656 1>,
+					  <209 659 1>,
+					  <210 122 1>,
+					  <211 699 1>,
+					  <212 705 1>,
+					  <213 450 1>,
+					  <214 643 2>,
+					  <216 646 5>,
+					  <221 390 5>,
+					  <226 700 2>,
+					  <228 440 1>,
+					  <229 663 1>,
+					  <230 524 2>,
+					  <232 612 3>,
+					  <235 723 5>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,sa8775p-tlmm";
+			reg = <0x0 0x0f000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 149>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		memtimer: timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c27000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS 2>,
+					  <SLEEP_TCS 3>,
+					  <WAKE_TCS 3>,
+					  <CONTROL_TCS 0>;
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sa8775p-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board_clk>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sa8775p-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-0 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sa8775p-cpufreq-epss",
+				     "qcom,cpufreq-epss";
+			reg = <0x0 0x18591000 0x0 0x1000>,
+			      <0x0 0x18593000 0x0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+	};
+
+	arch_timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index c3bdd3295c02..9f052270e090 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -312,14 +312,9 @@
 
 		reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>;
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				panel0_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
 			};
 		};
 	};
@@ -354,7 +349,7 @@
 &qspi {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -512,8 +507,11 @@
 	bias-disable;
 };
 
-&qspi_data01 {
-	/* High-Z when no transfers; nice to park the lines */
+&qspi_data0 {
+	bias-pull-up;
+};
+
+&qspi_data1 {
 	bias-pull-up;
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
deleted file mode 100644
index 3abd6222fe46..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Kingoftown board device tree source
- *
- * Copyright 2021 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor.dtsi"
-#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
-#include "sc7180-trogdor-kingoftown.dtsi"
-
-/ {
-	model = "Google Kingoftown (rev0)";
-	compatible = "google,kingoftown-rev0", "qcom,sc7180";
-};
-
-/*
- * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a
- * power rail instead, since kingoftown does not have FP.
- */
-&pp3300_fp_tp {
-	gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
-	enable-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&en_fp_rails>;
-};
-
-&tlmm {
-	en_fp_rails: en-fp-rails-state {
-		pins = "gpio74";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts
deleted file mode 100644
index e0752ba7df11..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Kingoftown board device tree source
- *
- * Copyright 2021 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor.dtsi"
-#include "sc7180-trogdor-parade-ps8640.dtsi"
-#include "sc7180-trogdor-kingoftown.dtsi"
-
-/ {
-	model = "Google Kingoftown (rev1+)";
-	compatible = "google,kingoftown", "qcom,sc7180";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
index 315ac5eb5f78..36326ef972dc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
@@ -5,10 +5,18 @@
  * Copyright 2021 Google LLC.
  */
 
-/* This file must be included after sc7180-trogdor.dtsi */
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
 #include <arm/cros-ec-keyboard.dtsi>
 #include "sc7180-trogdor-lte-sku.dtsi"
 
+/ {
+	model = "Google Kingoftown";
+	compatible = "google,kingoftown", "qcom,sc7180";
+};
+
 &alc5682 {
 	compatible = "realtek,rt5682s";
 	/delete-property/ VBAT-supply;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
index 850776c5323d..70d5a7aa8873 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
@@ -26,7 +26,7 @@
 		interrupt-parent = <&tlmm>;
 		interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
 
-		vcc-supply = <&pp3300_fp_tp>;
+		vdd-supply = <&pp3300_fp_tp>;
 		hid-descr-addr = <0x20>;
 
 		wakeup-source;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
index 235cda2bba5e..7f01573b5543 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
@@ -23,7 +23,7 @@
 /delete-node/&ap_ts;
 
 &panel {
-	compatible = "innolux,n116bca-ea1", "innolux,n116bge";
+	compatible = "innolux,n116bca-ea1";
 };
 
 &sdhc_2 {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
deleted file mode 100644
index d49de65aa960..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Lazor board device tree source
- *
- * Copyright 2020 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor.dtsi"
-#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
-#include "sc7180-trogdor-lazor.dtsi"
-
-/ {
-	model = "Google Lazor (rev0)";
-	compatible = "google,lazor-rev0", "qcom,sc7180";
-};
-
-&sn65dsi86_out {
-	/*
-	 * Lane 0 was incorrectly mapped on the cable, but we've now decided
-	 * that the cable is canon and in -rev1+ we'll make a board change
-	 * that means we no longer need the swizzle.
-	 */
-	lane-polarities = <1 0>;
-};
-
-&usb_hub_2_x {
-	 vdd-supply = <&pp3300_l7c>;
-};
-
-&usb_hub_3_x {
-	 vdd-supply = <&pp3300_l7c>;
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts
deleted file mode 100644
index 2767817fb053..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Mrbland board device tree source
- *
- * Copyright 2021 Google LLC.
- *
- * SKU: 0x0 => 0
- *  - bits 7..4: Panel ID: 0x0 (AUO)
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor-mrbland-rev0.dtsi"
-
-/ {
-	model = "Google Mrbland rev0 AUO panel board";
-	compatible = "google,mrbland-rev0-sku0", "qcom,sc7180";
-};
-
-&panel {
-	compatible = "auo,b101uan08.3";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts
deleted file mode 100644
index 711485574a03..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Mrbland board device tree source
- *
- * Copyright 2021 Google LLC.
- *
- * SKU: 0x10 => 16
- *  - bits 7..4: Panel ID: 0x1 (BOE)
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor-mrbland-rev0.dtsi"
-
-/ {
-	model = "Google Mrbland rev0 BOE panel board";
-	compatible = "google,mrbland-rev0-sku16", "qcom,sc7180";
-};
-
-&panel {
-	compatible = "boe,tv101wum-n53";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
deleted file mode 100644
index f4c1f3813664..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Mrbland board device tree source
- *
- * Copyright 2021 Google LLC.
- *
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor-mrbland.dtsi"
-
-&avdd_lcd {
-	gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
-};
-
-&panel {
-	enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
-};
-
-&v1p8_mipi {
-	gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
-};
-
-/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */
-&avdd_lcd_en {
-	pins = "gpio80";
-};
-
-&mipi_1800_en {
-	pins = "gpio81";
-};
-
-&vdd_reset_1800 {
-	pins = "gpio76";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts
deleted file mode 100644
index 275313ef7554..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Mrbland board device tree source
- *
- * Copyright 2021 Google LLC.
- *
- * SKU: 0x600 => 1536
- *  - bits 11..8: Panel ID: 0x6 (AUO)
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor-mrbland.dtsi"
-
-/ {
-	model = "Google Mrbland rev1+ AUO panel board";
-	compatible = "google,mrbland-sku1536", "qcom,sc7180";
-};
-
-&panel {
-	compatible = "auo,b101uan08.3";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts
deleted file mode 100644
index 87c6b6c30b5e..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Mrbland board device tree source
- *
- * Copyright 2021 Google LLC.
- *
- * SKU: 0x300 => 768
- *  - bits 11..8: Panel ID: 0x3 (BOE)
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor-mrbland.dtsi"
-
-/ {
-	model = "Google Mrbland (rev1 - 2) BOE panel board";
-	/* Uses ID 768 on rev1 and 1024 on rev2+ */
-	compatible = "google,mrbland-sku1024", "google,mrbland-sku768",
-		"qcom,sc7180";
-};
-
-&panel {
-	compatible = "boe,tv101wum-n53";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
deleted file mode 100644
index ed12ee35f06b..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
+++ /dev/null
@@ -1,320 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Mrbland board device tree source
- *
- * Copyright 2021 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor.dtsi"
-
-/* This board only has 1 USB Type-C port. */
-/delete-node/ &usb_c1;
-
-/ {
-	avdd_lcd: avdd-lcd-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "avdd_lcd";
-
-		gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&avdd_lcd_en>;
-
-		vin-supply = <&pp5000_a>;
-	};
-
-	avee_lcd: avee-lcd-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "avee_lcd";
-
-		gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&avee_lcd_en>;
-
-		vin-supply = <&pp5000_a>;
-	};
-
-	v1p8_mipi: v1p8-mipi-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "v1p8_mipi";
-
-		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&mipi_1800_en>;
-
-		vin-supply = <&pp3300_a>;
-	};
-};
-
-&backlight {
-	pwms = <&cros_ec_pwm 0>;
-};
-
-&camcc {
-	status = "okay";
-};
-
-&cros_ec {
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb-switches";
-	};
-};
-
-&dsi0 {
-
-	panel: panel@0 {
-		/* Compatible will be filled in per-board */
-		reg = <0>;
-		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vdd_reset_1800>;
-		avdd-supply = <&avdd_lcd>;
-		avee-supply = <&avee_lcd>;
-		pp1800-supply = <&v1p8_mipi>;
-		pp3300-supply = <&pp3300_dx_edp>;
-		backlight = <&backlight>;
-		rotation = <270>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				panel_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
-			};
-		};
-	};
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&panel_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&gpio_keys {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	ap_ts: touchscreen@5d {
-		compatible = "goodix,gt7375p";
-		reg = <0x5d>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-
-		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
-
-		vdd-supply = <&pp3300_ts>;
-	};
-};
-
-&pp1800_uf_cam {
-	status = "okay";
-};
-
-&pp1800_wf_cam {
-	status = "okay";
-};
-
-&pp2800_uf_cam {
-	status = "okay";
-};
-
-&pp2800_wf_cam {
-	status = "okay";
-};
-
-&wifi {
-	qcom,ath10k-calibration-variant = "GO_MRBLAND";
-};
-
-/*
- * No eDP on this board but it's logically the same signal so just give it
- * a new name and assign the proper GPIO.
- */
-pp3300_disp_on: &pp3300_dx_edp {
-	gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
-};
-
-/* PINCTRL - modifications to sc7180-trogdor.dtsi */
-
-/*
- * No eDP on this board but it's logically the same signal so just give it
- * a new name and assign the proper GPIO.
- */
-
-tp_en: &en_pp3300_dx_edp {
-	pins = "gpio85";
-};
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
-	gpio-line-names = "HUB_RST_L",
-			  "AP_RAM_ID0",
-			  "AP_SKU_ID2",
-			  "AP_RAM_ID1",
-			  "",
-			  "AP_RAM_ID2",
-			  "UF_CAM_EN",
-			  "WF_CAM_EN",
-			  "TS_RESET_L",
-			  "TS_INT_L",
-			  "",
-			  "",
-			  "AP_EDP_BKLTEN",
-			  "UF_CAM_MCLK",
-			  "WF_CAM_CLK",
-			  "",
-			  "",
-			  "UF_CAM_SDA",
-			  "UF_CAM_SCL",
-			  "WF_CAM_SDA",
-			  "WF_CAM_SCL",
-			  "AVEE_LCD_EN",
-			  "",
-			  "AMP_EN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "HP_IRQ",
-			  "WF_CAM_RST_L",
-			  "UF_CAM_RST_L",
-			  "AP_BRD_ID2",
-			  "",
-			  "AP_BRD_ID0",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-			  "AP_H1_SPI_CLK",
-			  "AP_H1_SPI_CS_L",
-			  "BT_UART_CTS",
-			  "BT_UART_RTS",
-			  "BT_UART_TXD",
-			  "BT_UART_RXD",
-			  "H1_AP_INT_ODL",
-			  "",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "HP_I2C_SDA",
-			  "HP_I2C_SCL",
-			  "FORCED_USB_BOOT",
-			  "AMP_BCLK",
-			  "AMP_LRCLK",
-			  "AMP_DIN",
-			  "PEN_DET_ODL",
-			  "HP_BCLK",
-			  "HP_LRCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-			  "HP_MCLK",
-			  "AP_SKU_ID0",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "AP_SPI_CLK",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  /*
-			   * AP_FLASH_WP_L is crossystem ABI. Schematics
-			   * call it BIOS_FLASH_WP_L.
-			   */
-			  "AP_FLASH_WP_L",
-			  "",
-			  "AP_SPI_CS0_L",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "WLAN_SW_CTRL",
-			  "",
-			  "REPORT_E",
-			  "",
-			  "ID0",
-			  "",
-			  "ID1",
-			  "",
-			  "",
-			  "",
-			  "CODEC_PWR_EN",
-			  "HUB_EN",
-			  "TP_EN",
-			  "MIPI_1.8V_EN",
-			  "VDD_RESET_1.8V",
-			  "AVDD_LCD_EN",
-			  "",
-			  "AP_SKU_ID1",
-			  "AP_RST_REQ",
-			  "",
-			  "AP_BRD_ID1",
-			  "AP_EC_INT_L",
-			  "SDM_GRFC_3",
-			  "",
-			  "",
-			  "BOOT_CONFIG_4",
-			  "BOOT_CONFIG_2",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "BOOT_CONFIG_3",
-			  "WCI2_LTE_COEX_TXD",
-			  "WCI2_LTE_COEX_RXD",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "FORCED_USB_BOOT_POL",
-			  "AP_TS_PEN_I2C_SDA",
-			  "AP_TS_PEN_I2C_SCL",
-			  "DP_HOT_PLUG_DET",
-			  "EC_IN_RW_ODL";
-
-	avdd_lcd_en: avdd-lcd-en-state {
-		pins = "gpio88";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	avee_lcd_en: avee-lcd-en-state {
-		pins = "gpio21";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	mipi_1800_en: mipi-1800-en-state {
-		pins = "gpio86";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	vdd_reset_1800: vdd-reset-1800-state {
-		pins = "gpio87";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
index d06cc4ea3375..8823edbb4d6e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
@@ -39,7 +39,7 @@
 		interrupt-parent = <&tlmm>;
 		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
-		vcc-supply = <&pp3300_fp_tp>;
+		vdd-supply = <&pp3300_fp_tp>;
 		post-power-on-delay-ms = <100>;
 		hid-descr-addr = <0x0001>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
index bc4f3b6c6634..273e2249f018 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
@@ -12,6 +12,7 @@
 	compatible = "realtek,rt5682s";
 	realtek,dmic1-clk-pin = <2>;
 	realtek,dmic-clk-rate-hz = <2048000>;
+	/delete-property/ VBAT-supply;
 };
 
 ap_ts_pen_1v8: &i2c4 {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
index cb41ccdaccfd..8e7b42f843d4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -65,14 +65,9 @@
 		backlight = <&backlight>;
 		rotation = <270>;
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				panel_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts
deleted file mode 100644
index d6ed7d0afe4a..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Wormdingler board device tree source
- *
- * Copyright 2021 Google LLC.
- *
- * SKU: 0x10 => 16
- *  - bits 7..4: Panel ID: 0x1 (BOE)
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor-wormdingler-rev0.dtsi"
-
-/ {
-	model = "Google Wormdingler rev0 BOE panel board";
-	compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180";
-};
-
-&panel {
-	compatible = "boe,tv110c9m-ll3";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts
deleted file mode 100644
index c03525ea64ca..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Wormdingler board device tree source
- *
- * Copyright 2021 Google LLC.
- *
- * SKU: 0x0 => 0
- *  - bits 7..4: Panel ID: 0x0 (INX)
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor-wormdingler-rev0.dtsi"
-
-/ {
-	model = "Google Wormdingler rev0 INX panel board";
-	compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180";
-};
-
-&panel {
-	compatible = "innolux,hj110iz-01a";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
deleted file mode 100644
index 7f272c6e95f6..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Wormdingler board device tree source
- *
- * Copyright 2021 Google LLC.
- *
- */
-
-/dts-v1/;
-
-#include "sc7180-trogdor-wormdingler.dtsi"
-
-&avdd_lcd {
-	gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
-};
-
-&panel {
-	enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
-};
-
-&v1p8_mipi {
-	gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
-};
-
-/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */
-&avdd_lcd_en {
-	pins = "gpio80";
-};
-
-&mipi_1800_en {
-	pins = "gpio81";
-};
-
-&vdd_reset_1800 {
-	pins = "gpio76";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index 9832e752da35..262d6691abd9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -124,14 +124,9 @@
 		backlight = <&backlight>;
 		rotation = <270>;
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				panel_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 423630c4d02c..ca6920de7ea8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -424,8 +424,9 @@
 
 &qspi {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+	pinctrl-1 = <&qspi_sleep>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -512,6 +513,8 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 
 		pp1800_prox:
@@ -1044,17 +1047,20 @@ ap_spi_fp: &spi10 {
 };
 
 &qspi_cs0 {
-	bias-disable;
+	bias-disable;		/* External pullup */
 };
 
 &qspi_clk {
 	drive-strength = <8>;
-	bias-disable;
+	bias-disable;		/* Rely on Cr50 internal pulldown */
 };
 
-&qspi_data01 {
-	/* High-Z when no transfers; nice to park the lines */
-	bias-pull-up;
+&qspi_data0 {
+	bias-disable;		/* Rely on Cr50 internal pulldown */
+};
+
+&qspi_data1 {
+	bias-pull-down;
 };
 
 &qup_i2c2_default {
@@ -1204,7 +1210,6 @@ ap_spi_fp: &spi10 {
 	ap_ec_int_l: ap-ec-int-l-state {
 		pins = "gpio94";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
@@ -1227,7 +1232,6 @@ ap_spi_fp: &spi10 {
 	bios_flash_wp_l: bios-flash-wp-l-state {
 		pins = "gpio66";
 		function = "gpio";
-		input-enable;
 		bias-disable;
 	};
 
@@ -1269,7 +1273,6 @@ ap_spi_fp: &spi10 {
 	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
 		pins = "gpio4";
 		function = "gpio";
-		input-enable;
 
 		/* Has external pullup */
 		bias-disable;
@@ -1284,7 +1287,6 @@ ap_spi_fp: &spi10 {
 	h1_ap_int_odl: h1-ap-int-odl-state {
 		pins = "gpio42";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
@@ -1333,12 +1335,27 @@ ap_spi_fp: &spi10 {
 	p_sensor_int_l: p-sensor-int-l-state {
 		pins = "gpio24";
 		function = "gpio";
-		input-enable;
 
 		/* Has external pullup */
 		bias-disable;
 	};
 
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio63", "gpio64", "gpio65", "gpio68";
+
+		/*
+		 * When we're not actively transferring we want pins as GPIOs
+		 * with output disabled so that the quad SPI IP block stops
+		 * driving them. We rely on the normal pulls configured in
+		 * the active state and don't redefine them here. Also note
+		 * that we don't need the reverse (output-enable) in the
+		 * normal mode since the "output-enable" only matters for
+		 * GPIO function.
+		 */
+		function = "gpio";
+		output-disable;
+	};
+
 	qup_uart3_sleep: qup-uart3-sleep-state {
 		cts-pins {
 			/*
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index ebfa21e9ed8a..ea1ffade1aa1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -76,6 +76,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
@@ -103,6 +104,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
@@ -126,6 +128,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
@@ -149,6 +152,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
@@ -172,6 +176,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
@@ -195,6 +200,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
@@ -218,6 +224,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
@@ -241,6 +248,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
@@ -1535,12 +1543,17 @@
 				function = "qspi_cs";
 			};
 
-			qspi_data01: qspi-data01-state {
-				pins = "gpio64", "gpio65";
+			qspi_data0: qspi-data0-state {
+				pins = "gpio64";
 				function = "qspi_data";
 			};
 
-			qspi_data12: qspi-data12-state {
+			qspi_data1: qspi-data1-state {
+				pins = "gpio65";
+				function = "qspi_data";
+			};
+
+			qspi_data23: qspi-data23-state {
 				pins = "gpio66", "gpio67";
 				function = "qspi_data";
 			};
@@ -2760,7 +2773,7 @@
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc7180-llcc";
 			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg-names = "llcc0_base", "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -3019,7 +3032,6 @@
 						required-opps = <&rpmhpd_opp_nom>;
 					};
 				};
-
 			};
 
 			dsi0: dsi@ae94000 {
@@ -3280,7 +3292,6 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
-			cell-index = <0>;
 		};
 
 		sram@146aa000 {
@@ -3407,7 +3418,8 @@
 		};
 
 		apss_shared: mailbox@17c00000 {
-			compatible = "qcom,sc7180-apss-shared";
+			compatible = "qcom,sc7180-apss-shared",
+				     "qcom,sdm845-apss-shared";
 			reg = <0 0x17c00000 0 0x10000>;
 			#mbox-cells = <1>;
 		};
@@ -3570,7 +3582,7 @@
 		};
 
 		cpufreq_hw: cpufreq@18323000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sc7180-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 
@@ -3578,6 +3590,7 @@
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		wifi: wifi@18800000 {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index 16fb20369c01..f562e4d2b655 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -60,8 +60,9 @@
  */
 &qspi {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+	pinctrl-1 = <&qspi_sleep>;
 
 	spi_flash: flash@0 {
 		compatible = "jedec,spi-nor";
@@ -85,3 +86,23 @@
 		iommus = <&apps_smmu 0x1c02 0x1>;
 	};
 };
+
+/* PINCTRL - chrome-common pinctrl */
+
+&tlmm {
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+
+		/*
+		 * When we're not actively transferring we want pins as GPIOs
+		 * with output disabled so that the quad SPI IP block stops
+		 * driving them. We rely on the normal pulls configured in
+		 * the active state and don't redefine them here. Also note
+		 * that we don't need the reverse (output-enable) in the
+		 * normal mode since the "output-enable" only matters for
+		 * GPIO function.
+		 */
+		function = "gpio";
+		output-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index 1185141f348e..afae7f46b050 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -27,7 +27,7 @@
 };
 
 &apps_rsc {
-	pmg1110-regulators {
+	regulators-2 {
 		compatible = "qcom,pmg1110-rpmh-regulators";
 		qcom,pmic-id = "k";
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
index 1ca11a14104d..485f9942e128 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
@@ -94,6 +94,8 @@ hp_i2c: &i2c2 {
 		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
 
 		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
 		MICVDD-supply = <&pp3300_codec>;
 
 		realtek,dmic1-data-pin = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
index 69e7aa7b2f6c..8b855345e5c7 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
@@ -76,6 +76,8 @@ hp_i2c: &i2c2 {
 		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
 
 		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
 		MICVDD-supply = <&pp3300_codec>;
 
 		realtek,dmic1-data-pin = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index 4e0b013e25f4..df39a64da923 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -40,7 +40,7 @@
 /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
 
 &apps_rsc {
-	pmg1110-regulators {
+	regulators-2 {
 		compatible = "qcom,pmg1110-rpmh-regulators";
 		qcom,pmic-id = "k";
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
index 818d4046d2c7..38c8a3679fcb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
@@ -33,7 +33,7 @@ ap_tp_i2c: &i2c0 {
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 
 		hid-descr-addr = <0x20>;
-		vcc-supply = <&pp3300_z1>;
+		vdd-supply = <&pp3300_z1>;
 
 		wakeup-source;
 	};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index b6137816f2f3..5b1c175c47f1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -464,7 +464,7 @@ ap_i2c_tpm: &i2c14 {
 
 &mdss_dp_out {
 	data-lanes = <0 1>;
-	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
 };
 
 &mdss_mdp {
@@ -692,18 +692,22 @@ ap_ec_spi: &spi10 {
 };
 
 &qspi_cs0 {
-	bias-disable;
+	bias-disable;		/* External pullup */
 	drive-strength = <8>;
 };
 
 &qspi_clk {
-	bias-disable;
+	bias-pull-down;		/* No external pulls */
 	drive-strength = <8>;
 };
 
-&qspi_data01 {
-	/* High-Z when no transfers; nice to park the lines */
-	bias-pull-up;
+&qspi_data0 {
+	bias-pull-down;		/* No external pulls */
+	drive-strength = <8>;
+};
+
+&qspi_data1 {
+	bias-disable;		/* External pulldown */
 	drive-strength = <8>;
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
index 3cfeb118d379..ebae545c587c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
@@ -82,14 +82,12 @@ ap_h1_spi: &spi14 {
 	ap_ec_int_l: ap-ec-int-l-state {
 		pins = "gpio18";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
 	h1_ap_int_odl: h1-ap-int-odl-state {
 		pins = "gpio104";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index ba64316b4427..15222e92e3f5 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -25,7 +25,7 @@
 };
 
 &apps_rsc {
-	pmr735a-regulators {
+	regulators-2 {
 		compatible = "qcom,pmr735a-rpmh-regulators";
 		qcom,pmic-id = "e";
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 8b5293e7fd2a..c6dc200c00ce 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -70,7 +70,7 @@
 			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_VOLUMEUP>;
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <15>;
 			linux,can-disable;
 		};
@@ -184,7 +184,7 @@
 };
 
 &apps_rsc {
-	pm7325-regulators {
+	regulators-0 {
 		compatible = "qcom,pm7325-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -279,7 +279,7 @@
 		};
 	};
 
-	pm8350c-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -636,16 +636,19 @@
 };
 
 &qspi_cs0 {
-	bias-disable;
+	bias-disable;		/* External pullup */
 };
 
 &qspi_clk {
-	bias-disable;
+	bias-pull-down;		/* No external pulls or external pulldown */
 };
 
-&qspi_data01 {
-	/* High-Z when no transfers; nice to park the lines */
-	bias-pull-up;
+&qspi_data0 {
+	bias-pull-down;		/* No external pulls or external pulldown */
+};
+
+&qspi_data1 {
+	bias-pull-down;		/* No external pulls or external pulldown */
 };
 
 &qup_uart5_tx {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 88204f794ccb..88b3586e389f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -87,7 +87,7 @@
 	 * are left out of here since they are managed elsewhere.
 	 */
 
-	pm7325-regulators {
+	regulators-0 {
 		compatible = "qcom,pm7325-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -188,7 +188,7 @@
 		};
 	};
 
-	pm8350c-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -354,14 +354,9 @@
 
 			backlight = <&pm8350c_pwm_backlight>;
 
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					edp_panel_in: endpoint {
-						remote-endpoint = <&mdss_edp_out>;
-					};
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_edp_out>;
 				};
 			};
 		};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index bdcb74925313..31728f461422 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -168,6 +168,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
@@ -193,6 +194,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
@@ -214,6 +216,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
@@ -235,6 +238,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
@@ -256,6 +260,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
@@ -277,6 +282,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
@@ -298,6 +304,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
@@ -319,6 +326,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
 			enable-method = "psci";
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
@@ -935,7 +943,6 @@
 					opp-avg-kBps = <390000 0>;
 				};
 			};
-
 		};
 
 		gpi_dma0: dma-controller@900000 {
@@ -2077,7 +2084,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
@@ -2131,7 +2138,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_clkreq_n>;
 
-			iommus = <&apps_smmu 0x1c80 0x1>;
+			dma-coherent;
 
 			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
 				    <0x100 &apps_smmu 0x1c81 0x1>;
@@ -2677,7 +2684,8 @@
 		};
 
 		adreno_smmu: iommu@3da0000 {
-			compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
+			compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x03da0000 0 0x20000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <2>;
@@ -3289,7 +3297,6 @@
 					opp-avg-kBps = <200000 0>;
 				};
 			};
-
 		};
 
 		usb_1_hsphy: phy@88e3000 {
@@ -3531,7 +3538,7 @@
 		};
 
 		pmu@90b6400 {
-			compatible = "qcom,sc7280-cpu-bwmon", "qcom,msm8998-bwmon";
+			compatible = "qcom,sc7280-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x090b6400 0 0x600>;
 
 			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
@@ -3582,8 +3589,9 @@
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc7280-llcc";
-			reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -3593,12 +3601,17 @@
 			      <0 0x088e2000 0 0x1000>;
 			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
 			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				port@0 {
+					reg = <0>;
 					eud_ep: endpoint {
 						remote-endpoint = <&usb2_role_switch>;
 					};
 				};
 				port@1 {
+					reg = <1>;
 					eud_con: endpoint {
 						remote-endpoint = <&con_eud>;
 					};
@@ -3609,7 +3622,11 @@
 		eud_typec: connector {
 			compatible = "usb-c-connector";
 			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				port@0 {
+					reg = <0>;
 					con_eud: endpoint {
 						remote-endpoint = <&eud_con>;
 					};
@@ -3748,7 +3765,6 @@
 					required-opps = <&rpmhpd_opp_turbo>;
 				};
 			};
-
 		};
 
 		videocc: clock-controller@aaf0000 {
@@ -4337,12 +4353,17 @@
 				function = "qspi_cs";
 			};
 
-			qspi_data01: qspi-data01-state {
-				pins = "gpio12", "gpio13";
+			qspi_data0: qspi-data0-state {
+				pins = "gpio12";
+				function = "qspi_data";
+			};
+
+			qspi_data1: qspi-data1-state {
+				pins = "gpio13";
 				function = "qspi_data";
 			};
 
-			qspi_data12: qspi-data12-state {
+			qspi_data23: qspi-data23-state {
 				pins = "gpio16", "gpio17";
 				function = "qspi_data";
 			};
@@ -5164,20 +5185,20 @@
 
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			#interrupt-cells = <3>;
-			interrupt-controller;
 			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
 			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
 
-			gic-its@17a40000 {
+			msi-controller@17a40000 {
 				compatible = "arm,gic-v3-its";
+				reg = <0 0x17a40000 0 0x20000>;
 				msi-controller;
 				#msi-cells = <1>;
-				reg = <0 0x17a40000 0 0x20000>;
 				status = "disabled";
 			};
 		};
@@ -5337,6 +5358,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 98a0f1f9f01e..5b25d54b9591 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -413,11 +413,9 @@
 
 			backlight = <&backlight>;
 
-			ports {
-				port {
-					edp_panel_in: endpoint {
-						remote-endpoint = <&mdss0_dp3_out>;
-					};
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss0_dp3_out>;
 				};
 			};
 		};
@@ -563,6 +561,21 @@
 	status = "okay";
 };
 
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
 &qup0 {
 	status = "okay";
 };
@@ -857,7 +870,7 @@
 			pins = "gpio101";
 			function = "gpio";
 			bias-disable;
-			drive-strengh = <16>;
+			drive-strength = <16>;
 			output-high;
 		};
 
@@ -882,7 +895,7 @@
 			pins = "gpio48";
 			function = "gpio";
 			bias-disable;
-			drive-strengh = <16>;
+			drive-strength = <16>;
 			output-high;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 98e71b933437..bdcba719fc38 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -24,6 +24,7 @@
 	aliases {
 		i2c4 = &i2c4;
 		i2c21 = &i2c21;
+		serial1 = &uart2;
 	};
 
 	wcd938x: audio-codec {
@@ -363,13 +364,18 @@
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "b";
 
+		vdd-l1-l4-supply = <&vreg_s12b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
 		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
 
 		vreg_s10b: smps10 {
 			regulator-name = "vreg_s10b";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_s11b: smps11 {
@@ -377,6 +383,7 @@
 			regulator-min-microvolt = <1272000>;
 			regulator-max-microvolt = <1272000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_s12b: smps12 {
@@ -384,6 +391,7 @@
 			regulator-min-microvolt = <984000>;
 			regulator-max-microvolt = <984000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l3b: ldo3 {
@@ -413,7 +421,21 @@
 	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
+
 		vdd-bob-supply = <&vreg_vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1c>;
+		vdd-l2-l8-supply = <&vreg_s1c>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s11b>;
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
 
 		vreg_l1c: ldo1 {
 			regulator-name = "vreg_l1c";
@@ -441,6 +463,7 @@
 			regulator-min-microvolt = <3008000>;
 			regulator-max-microvolt = <3960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
 		};
 	};
 
@@ -449,6 +472,10 @@
 		qcom,pmic-id = "d";
 
 		vdd-l1-l4-supply = <&vreg_s11b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
 
 		vreg_l3d: ldo3 {
 			regulator-name = "vreg_l3d";
@@ -527,11 +554,9 @@
 			backlight = <&backlight>;
 			power-supply = <&vreg_edp_3p3>;
 
-			ports {
-				port {
-					edp_panel_in: endpoint {
-						remote-endpoint = <&mdss0_dp3_out>;
-					};
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss0_dp3_out>;
 				};
 			};
 		};
@@ -570,6 +595,7 @@
 		hid-descr-addr = <0x1>;
 		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts0_default>;
@@ -580,7 +606,7 @@
 	clock-frequency = <400000>;
 
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c21_default>;
+	pinctrl-0 = <&i2c21_default>, <&tpad_default>;
 
 	status = "okay";
 
@@ -591,13 +617,9 @@
 		hid-descr-addr = <0x1>;
 		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&vreg_misc_3p3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpad_default>;
+		vddl-supply = <&vreg_s10b>;
 
 		wakeup-source;
-
-		status = "disabled";
 	};
 
 	touchpad@2c {
@@ -607,9 +629,7 @@
 		hid-descr-addr = <0x20>;
 		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&vreg_misc_3p3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpad_default>;
+		vddl-supply = <&vreg_s10b>;
 
 		wakeup-source;
 	};
@@ -621,6 +641,7 @@
 		hid-descr-addr = <0x1>;
 		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&kybd_default>;
@@ -677,6 +698,23 @@
 	pinctrl-0 = <&pcie4_default>;
 
 	status = "okay";
+
+	pcie@0 {
+		device_type = "pci";
+		reg = <0x0 0x0 0x0 0x0 0x0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		bus-range = <0x01 0xff>;
+
+		wifi@0 {
+			compatible = "pci17cb,1103";
+			reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+			qcom,ath11k-calibration-variant = "LE_X13S";
+		};
+	};
 };
 
 &pcie4_phy {
@@ -766,81 +804,109 @@
 	status = "okay";
 };
 
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
 &pmk8280_vadc {
 	status = "okay";
 
 	pmic-die-temp@3 {
 		reg = <PMK8350_ADC7_DIE_TEMP>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_die_temp";
 	};
 
 	xo-therm@44 {
 		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "pmk8350_xo_therm";
 	};
 
 	pmic-die-temp@103 {
 		reg = <PM8350_ADC7_DIE_TEMP(1)>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_1_die_temp";
 	};
 
 	sys-therm@144 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm1";
 	};
 
 	sys-therm@145 {
 		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm2";
 	};
 
 	sys-therm@146 {
 		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm3";
 	};
 
 	sys-therm@147 {
 		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm4";
 	};
 
 	pmic-die-temp@303 {
 		reg = <PM8350_ADC7_DIE_TEMP(3)>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_2_die_temp";
 	};
 
 	sys-therm@344 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm5";
 	};
 
 	sys-therm@345 {
 		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm6";
 	};
 
 	sys-therm@346 {
 		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm7";
 	};
 
 	sys-therm@347 {
 		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm8";
 	};
 
 	pmic-die-temp@403 {
 		reg = <PMR735A_ADC7_DIE_TEMP>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_die_temp";
 	};
 };
 
@@ -884,9 +950,9 @@
 		"VA DMIC0", "MIC BIAS1",
 		"VA DMIC1", "MIC BIAS1",
 		"VA DMIC2", "MIC BIAS3",
-		"TX DMIC0", "MIC BIAS1",
-		"TX DMIC1", "MIC BIAS2",
-		"TX DMIC2", "MIC BIAS3",
+		"VA DMIC0", "VA MIC BIAS1",
+		"VA DMIC1", "VA MIC BIAS1",
+		"VA DMIC2", "VA MIC BIAS3",
 		"TX SWR_ADC1", "ADC2_OUTPUT";
 
 	wcd-playback-dai-link {
@@ -937,7 +1003,7 @@
 	va-dai-link {
 		link-name = "VA Capture";
 		cpu {
-			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
 		};
 
 		platform {
@@ -1002,6 +1068,32 @@
 	status = "okay";
 };
 
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddio-supply = <&vreg_s10b>;
+		vddbtcxmx-supply = <&vreg_s12b>;
+		vddrfacmn-supply = <&vreg_s12b>;
+		vddrfa0p8-supply = <&vreg_s12b>;
+		vddrfa1p2-supply = <&vreg_s11b>;
+		vddrfa1p7-supply = <&vreg_s1c>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &usb_0 {
 	status = "okay";
 };
@@ -1062,7 +1154,7 @@
 
 	vdd-micb-supply = <&vreg_s10b>;
 
-	qcom,dmic-sample-rate = <600000>;
+	qcom,dmic-sample-rate = <4800000>;
 
 	status = "okay";
 };
@@ -1122,6 +1214,21 @@
 &tlmm {
 	gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
 
+	bt_default: bt-default-state {
+		hstp-bt-en-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		hstp-sw-ctrl-pins {
+			pins = "gpio132";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio25";
 		function = "gpio";
@@ -1132,7 +1239,6 @@
 	hall_int_n_default: hall-int-n-state {
 		pins = "gpio107";
 		function = "gpio";
-		input-enable;
 		bias-disable;
 	};
 
@@ -1289,12 +1395,40 @@
 		};
 	};
 
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	usb0_sbu_default: usb0-sbu-state {
 		oe-n-pins {
 			pins = "gpio101";
 			function = "gpio";
 			bias-disable;
-			drive-strengh = <16>;
+			drive-strength = <16>;
 			output-high;
 		};
 
@@ -1311,7 +1445,7 @@
 			pins = "gpio48";
 			function = "gpio";
 			bias-disable;
-			drive-strengh = <16>;
+			drive-strength = <16>;
 			output-high;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index df7d28f7ae60..a0ba535bb6c9 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -59,8 +59,9 @@
 		#size-cells = <0>;
 
 		pmk8280_pon: pon@1300 {
-			compatible = "qcom,pm8998-pon";
-			reg = <0x1300>;
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
 
 			pmk8280_pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
@@ -95,6 +96,24 @@
 			#thermal-sensor-cells = <1>;
 			status = "disabled";
 		};
+
+		pmk8280_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		pmk8280_sdam_6: nvram@8500 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x8500>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x8500 0x100>;
+			status = "disabled";
+		};
 	};
 
 	pmc8280_1: pmic@1 {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 0d02599d8867..8fa9fbfe5d00 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -43,8 +43,9 @@
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a78c";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <602>;
 			next-level-cache = <&L2_0>;
@@ -67,8 +68,9 @@
 
 		CPU1: cpu@100 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a78c";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <602>;
 			next-level-cache = <&L2_100>;
@@ -87,8 +89,9 @@
 
 		CPU2: cpu@200 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a78c";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <602>;
 			next-level-cache = <&L2_200>;
@@ -107,8 +110,9 @@
 
 		CPU3: cpu@300 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a78c";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <602>;
 			next-level-cache = <&L2_300>;
@@ -127,8 +131,9 @@
 
 		CPU4: cpu@400 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-x1c";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			next-level-cache = <&L2_400>;
@@ -147,8 +152,9 @@
 
 		CPU5: cpu@500 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-x1c";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			next-level-cache = <&L2_500>;
@@ -167,8 +173,9 @@
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-x1c";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			next-level-cache = <&L2_600>;
@@ -187,8 +194,9 @@
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-x1c";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			next-level-cache = <&L2_700>;
@@ -268,7 +276,6 @@
 		domain-idle-states {
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-power-collapse";
 				arm,psci-suspend-param = <0x4100c344>;
 				entry-latency-us = <3263>;
 				exit-latency-us = <6562>;
@@ -1207,6 +1214,20 @@
 				status = "disabled";
 			};
 
+			uart2: serial@988000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
 			i2c3: i2c@98c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0098c000 0 0x4000>;
@@ -1653,11 +1674,12 @@
 			      <0x0 0x30000000 0x0 0xf1d>,
 			      <0x0 0x30000f20 0x0 0xa8>,
 			      <0x0 0x30001000 0x0 0x1000>,
-			      <0x0 0x30100000 0x0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			      <0x0 0x30100000 0x0 0x100000>,
+			      <0x0 0x01c03000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0x0 0x30200000 0x0 0x30200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x30200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>;
 			bus-range = <0x00 0xff>;
 
@@ -1752,11 +1774,12 @@
 			      <0x0 0x32000000 0x0 0xf1d>,
 			      <0x0 0x32000f20 0x0 0xa8>,
 			      <0x0 0x32001000 0x0 0x1000>,
-			      <0x0 0x32100000 0x0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			      <0x0 0x32100000 0x0 0x100000>,
+			      <0x0 0x01c0b000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0x0 0x32200000 0x0 0x32200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x32200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>;
 			bus-range = <0x00 0xff>;
 
@@ -1849,11 +1872,12 @@
 			      <0x0 0x34000000 0x0 0xf1d>,
 			      <0x0 0x34000f20 0x0 0xa8>,
 			      <0x0 0x34001000 0x0 0x1000>,
-			      <0x0 0x34100000 0x0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			      <0x0 0x34100000 0x0 0x100000>,
+			      <0x0 0x01c13000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0x0 0x34200000 0x0 0x34200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x34200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>;
 			bus-range = <0x00 0xff>;
 
@@ -1949,11 +1973,12 @@
 			      <0x0 0x38000000 0x0 0xf1d>,
 			      <0x0 0x38000f20 0x0 0xa8>,
 			      <0x0 0x38001000 0x0 0x1000>,
-			      <0x0 0x38100000 0x0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			      <0x0 0x38100000 0x0 0x100000>,
+			      <0x0 0x01c1b000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0x0 0x38200000 0x0 0x38200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x38200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>;
 			bus-range = <0x00 0xff>;
 
@@ -2046,11 +2071,12 @@
 			      <0x0 0x3c000000 0x0 0xf1d>,
 			      <0x0 0x3c000f20 0x0 0xa8>,
 			      <0x0 0x3c001000 0x0 0x1000>,
-			      <0x0 0x3c100000 0x0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			      <0x0 0x3c100000 0x0 0x100000>,
+			      <0x0 0x01c23000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>;
 			bus-range = <0x00 0xff>;
 
@@ -2489,7 +2515,6 @@
 			status = "disabled";
 		};
 
-		/* RX */
 		swr1: soundwire-controller@3210000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03210000 0 0x2000>;
@@ -2504,12 +2529,12 @@
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0x00 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0x0f 0xff 0xff>;
 			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
 
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
@@ -2564,13 +2589,13 @@
 			status = "disabled";
 		};
 
-		/* WSA */
 		swr0: soundwire-controller@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.6.0";
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&wsamacro>;
 			clock-names = "iface";
+			label = "WSA";
 
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
@@ -2592,15 +2617,14 @@
 			status = "disabled";
 		};
 
-		/* TX */
 		swr2: soundwire-controller@3330000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03330000 0 0x2000>;
-			interrupts-extended = <&intc GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "core", "wake";
+			interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 			#sound-dai-cells = <1>;
@@ -2609,15 +2633,15 @@
 
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
-			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03 0x03>;
-			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x01>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
 			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x01>;
 
 			status = "disabled";
 		};
@@ -2702,7 +2726,6 @@
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <8>;
-					input-enable;
 				};
 			};
 
@@ -2720,7 +2743,6 @@
 					function = "dmic1_data";
 					drive-strength = <2>;
 					bias-pull-down;
-					input-enable;
 				};
 			};
 
@@ -2736,7 +2758,6 @@
 					pins = "gpio9";
 					function = "dmic2_data";
 					drive-strength = <8>;
-					input-enable;
 				};
 			};
 
@@ -2754,7 +2775,6 @@
 					function = "dmic2_data";
 					drive-strength = <2>;
 					bias-pull-down;
-					input-enable;
 				};
 			};
 
@@ -2773,7 +2793,6 @@
 					drive-strength = <2>;
 					slew-rate = <1>;
 					bias-bus-hold;
-
 				};
 			};
 
@@ -2946,7 +2965,7 @@
 		};
 
 		pmu@90b6400 {
-			compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,msm8998-bwmon";
+			compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x090b6400 0 0x600>;
 
 			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
@@ -2983,8 +3002,14 @@
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc8280xp-llcc";
-			reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+			      <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc4_base", "llcc5_base",
+				    "llcc6_base", "llcc7_base",  "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -3253,7 +3278,7 @@
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&mdss0_dp0_opp_table>;
-				power-domains = <&rpmhpd SC8280XP_CX>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				status = "disabled";
 
@@ -3331,7 +3356,7 @@
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&mdss0_dp1_opp_table>;
-				power-domains = <&rpmhpd SC8280XP_CX>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				status = "disabled";
 
@@ -4040,6 +4065,7 @@
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		remoteproc_nsp0: remoteproc@1b300000 {
@@ -4398,7 +4424,6 @@
 						required-opps = <&rpmhpd_opp_nom>;
 					};
 				};
-
 			};
 
 			mdss1_dp1: displayport-controller@22098000 {
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 7c81918eee66..7459525d9982 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -29,7 +29,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		volup {
+		key-volup {
 			label = "Volume Up";
 			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index e52580acd5c8..2ca713a3902a 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -112,7 +112,7 @@
 			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_VOLUMEDOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <15>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 5827cda270a0..37e72b1c56dc 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -328,6 +328,25 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-131250000 {
+			opp-hz = /bits/ 64 <131250000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-210000000 {
+			opp-hz = /bits/ 64 <210000000>;
+			required-opps = <&rpmpd_opp_svs_plus>;
+		};
+
+		opp-262500000 {
+			opp-hz = /bits/ 64 <262500000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -1189,7 +1208,6 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
-			cell-index = <0>;
 		};
 
 		usb3: usb@a8f8800 {
@@ -1451,25 +1469,6 @@
 					<0>;
 		};
 
-		dsi_opp_table: opp-table-dsi {
-			compatible = "operating-points-v2";
-
-			opp-131250000 {
-				opp-hz = /bits/ 64 <131250000>;
-				required-opps = <&rpmpd_opp_svs>;
-			};
-
-			opp-210000000 {
-				opp-hz = /bits/ 64 <210000000>;
-				required-opps = <&rpmpd_opp_svs_plus>;
-			};
-
-			opp-262500000 {
-				opp-hz = /bits/ 64 <262500000>;
-				required-opps = <&rpmpd_opp_nom>;
-			};
-		};
-
 		mdss: display-subsystem@c900000 {
 			compatible = "qcom,mdss";
 			reg = <0x0c900000 0x1000>,
@@ -2268,7 +2267,8 @@
 		};
 
 		apcs_glb: mailbox@17911000 {
-			compatible = "qcom,sdm660-apcs-hmss-global";
+			compatible = "qcom,sdm660-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
 			reg = <0x17911000 0x1000>;
 
 			#mbox-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
index e3e61b9d1b9d..32a7bd59e1ec 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -395,7 +395,6 @@
 			regulator-enable-ramp-delay = <500>;
 		};
 	};
-
 };
 
 &gcc {
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index 02f14692dd9d..c5f839dd1c6e 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -430,6 +431,10 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>,
 				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
 			clock-names = "iface", "core", "xo", "ice", "bus";
+			interconnects = <&aggre1_noc MASTER_EMMC 0 &aggre1_noc SLAVE_A1NOC_SNOC 0>,
+					<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_EMMC_CFG 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			operating-points-v2 = <&sdhc1_opp_table>;
 
 			iommus = <&apps_smmu 0x140 0xf>;
 
@@ -442,6 +447,38 @@
 			non-removable;
 
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-20000000 {
+					opp-hz = /bits/ 64 <20000000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+					opp-peak-kBps = <80000 80000>;
+					opp-avg-kBps = <52286 80000>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <200000 100000>;
+					opp-avg-kBps = <130718 100000>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <200000 130000>;
+					opp-avg-kBps = <130718 130000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <4096000 4096000>;
+					opp-avg-kBps = <1338562 1338562>;
+				};
+			};
 		};
 
 		gpi_dma0: dma-controller@800000 {
@@ -477,6 +514,8 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>;
+			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c0: i2c@880000 {
@@ -490,6 +529,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -507,6 +550,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -524,6 +571,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -541,6 +592,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -558,6 +613,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -575,6 +634,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -592,6 +655,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -609,6 +676,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -649,6 +720,8 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>;
+			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c8: i2c@a80000 {
@@ -662,6 +735,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -679,6 +756,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -696,6 +777,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -713,6 +798,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -730,6 +819,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -747,6 +840,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -764,6 +861,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -781,6 +882,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
@@ -1028,6 +1133,10 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
+			interconnects = <&aggre2_noc MASTER_USB3 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
 			status = "disabled";
 
 			usb_1_dwc3: usb@a600000 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index f2b48241d15c..d05c511718df 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -135,11 +135,9 @@
 		backlight = <&backlight>;
 		no-hpd;
 
-		ports {
-			panel_in: port {
-				panel_in_edp: endpoint {
-					remote-endpoint = <&sn65dsi86_out>;
-				};
+		panel_in: port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
 			};
 		};
 	};
@@ -319,8 +317,9 @@
 
 &qspi {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+	pinctrl-1 = <&qspi_sleep>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -995,16 +994,19 @@ ap_ts_i2c: &i2c14 {
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 
 &qspi_cs0 {
-	bias-disable;
+	bias-disable;		/* External pullup */
 };
 
 &qspi_clk {
-	bias-disable;
+	bias-disable;		/* Rely on Cr50 internal pulldown */
 };
 
-&qspi_data01 {
-	/* High-Z when no transfers; nice to park the lines */
-	bias-pull-up;
+&qspi_data0 {
+	bias-disable;		/* Rely on Cr50 internal pulldown */
+};
+
+&qspi_data1 {
+	bias-pull-down;
 };
 
 &qup_i2c3_default {
@@ -1155,14 +1157,12 @@ ap_ts_i2c: &i2c14 {
 	bios_flash_wp_r_l: bios-flash-wp-r-l-state {
 		pins = "gpio128";
 		function = "gpio";
-		input-enable;
 		bias-disable;
 	};
 
 	ec_ap_int_l: ec-ap-int-l-state {
 	       pins = "gpio122";
 	       function = "gpio";
-	       input-enable;
 	       bias-pull-up;
 	};
 
@@ -1190,7 +1190,6 @@ ap_ts_i2c: &i2c14 {
 	h1_ap_int_odl: h1-ap-int-odl-state {
 		pins = "gpio129";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
@@ -1236,6 +1235,22 @@ ap_ts_i2c: &i2c14 {
 		output-high;
 	};
 
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio90", "gpio91", "gpio92", "gpio95";
+
+		/*
+		 * When we're not actively transferring we want pins as GPIOs
+		 * with output disabled so that the quad SPI IP block stops
+		 * driving them. We rely on the normal pulls configured in
+		 * the active state and don't redefine them here. Also note
+		 * that we don't need the reverse (output-enable) in the
+		 * normal mode since the "output-enable" only matters for
+		 * GPIO function.
+		 */
+		function = "gpio";
+		output-disable;
+	};
+
 	sdc2_clk: sdc2-clk-state {
 		pins = "sdc2_clk";
 		bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index d4866feef2c4..e14fe9bbb386 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -819,7 +819,6 @@
 
 &spi2 {
 	/* On Low speed expansion */
-	label = "LS-SPI0";
 	status = "okay";
 };
 
@@ -1136,10 +1135,6 @@
 	bias-disable;
 };
 
-&pm8998_gpios {
-
-};
-
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 &qup_spi0_default {
 	drive-strength = <6>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 64638ea94db7..5c384345c05d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -29,6 +29,23 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall effect sensor";
+
+		pinctrl-0 = <&hall_sensor_default>;
+		pinctrl-names = "default";
+
+		event-hall-sensor {
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			label = "Hall Effect Sensor";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "Volume keys";
@@ -330,8 +347,6 @@
 	display_panel: panel@0 {
 		status = "disabled";
 
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
 		vddio-supply = <&vreg_l14a_1p88>;
@@ -535,6 +550,11 @@
 	bias-disable;
 };
 
+&slpi_pas {
+	firmware-name = "qcom/sdm845/oneplus6/slpi.mbn";
+	status = "okay";
+};
+
 &sound {
 	compatible = "qcom,sdm845-sndcard";
 	pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
@@ -753,6 +773,13 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
+	hall_sensor_default: hall-sensor-default-state {
+		pins = "gpio124";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	tri_state_key_default: tri-state-key-default-state {
 		pins = "gpio40", "gpio42", "gpio26";
 		function = "gpio";
@@ -779,7 +806,6 @@
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	panel_esd_pin: panel-esd-state {
@@ -787,17 +813,14 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
-		input-enable;
 	};
 
 	speaker_default: speaker-default-state {
-		mux {
-			pins = "gpio69";
-			function = "gpio";
-			drive-strength = <16>;
-			bias-pull-up;
-			output-high;
-		};
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+		output-high;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
index 086d14e2de92..d82c0d4407f0 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
@@ -45,7 +45,6 @@
 			"AMIC3", "MIC BIAS4",
 			"AMIC4", "MIC BIAS1",
 			"AMIC5", "MIC BIAS3";
-
 };
 
 /*
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index b54e304abf71..0ad891348e0c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -572,6 +572,11 @@
 	status = "okay";
 };
 
+&slpi_pas {
+	firmware-name = "qcom/sdm845/axolotl/slpi.mbn";
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
@@ -608,7 +613,6 @@
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
-		input-enable;
 	};
 
 	ts_int_suspend: ts-int-suspend-state {
@@ -616,7 +620,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
-		input-enable;
 	};
 
 	ts_reset_active: ts-reset-active-state {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts
index 34f84f1f1eb4..d97b7f1e7140 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts
@@ -11,3 +11,7 @@
 	model = "Sony Xperia XZ2";
 	compatible = "sony,akari-row", "qcom,sdm845";
 };
+
+&panel {
+	compatible = "sony,td4353-jdi-tama";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts
index 2f5e12deaada..5d2052a0ff69 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts
@@ -7,12 +7,57 @@
 
 #include "sdm845-sony-xperia-tama.dtsi"
 
+/* XZ3 uses an Atmel touchscreen instead. */
+/delete-node/ &touchscreen;
+
 / {
 	model = "Sony Xperia XZ3";
 	compatible = "sony,akatsuki-row", "qcom,sdm845";
+
+	/* Fixed DCDC for the OLED panel */
+	ts_vddio_supply: ts-vddio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_vddio";
+
+		regulator-min-microvolt = <1840000>;
+		regulator-max-microvolt = <1840000>;
+
+		gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ibb {
+	status = "disabled";
+};
+
+&lab {
+	status = "disabled";
+};
+
+&panel {
+	/* Akatsuki uses an OLED panel. */
+	/delete-property/ backlight;
+	/delete-property/ vsp-supply;
+	/delete-property/ vsn-supply;
+	/delete-property/ touch-reset-gpios;
+};
+
+&pmi8998_wled {
+	status = "disabled";
+};
+
+&tlmm {
+	ts_vddio_en: ts-vddio-en-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
 };
 
-/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */
 &vreg_l14a_1p8 {
 	regulator-min-microvolt = <1840000>;
 	regulator-max-microvolt = <1840000>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts
index c9e62c72f60e..cd056f78070f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts
@@ -11,3 +11,9 @@
 	model = "Sony Xperia XZ2 Compact";
 	compatible = "sony,apollo-row", "qcom,sdm845";
 };
+
+&panel {
+	compatible = "sony,td4353-jdi-tama";
+	height-mm = <112>;
+	width-mm = <56>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 4984c7496c31..420ffede3e80 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -98,6 +98,11 @@
 	};
 };
 
+&adsp_pas {
+	firmware-name = "qcom/sdm845/Sony/tama/adsp.mbn";
+	status = "okay";
+};
+
 &apps_rsc {
 	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
@@ -228,6 +233,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-system-load = <62000>;
 		};
 
 		vreg_l15a_1p8: ldo15 {
@@ -314,6 +320,7 @@
 			regulator-min-microvolt = <2856000>;
 			regulator-max-microvolt = <3008000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-system-load = <100000>;
 		};
 
 		vreg_lvs1a_1p8: lvs1 {
@@ -356,6 +363,48 @@
 	};
 };
 
+&cdsp_pas {
+	firmware-name = "qcom/sdm845/Sony/tama/cdsp.mbn";
+	status = "okay";
+};
+
+&dsi0 {
+	vdda-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* The compatible is assigned in device DTs. */
+		reg = <0>;
+
+		backlight = <&pmi8998_wled>;
+		vddio-supply = <&vreg_l14a_1p8>;
+		vsp-supply = <&lab>;
+		vsn-supply = <&ibb>;
+		panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
+		pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	vdds-supply = <&vreg_l1a_0p9>;
+	status = "okay";
+};
+
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			<GCC_QSPI_CORE_CLK_SRC>,
@@ -364,11 +413,64 @@
 			<GCC_LPASS_SWAY_CLK>;
 };
 
-&i2c5 {
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
 	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn";
+	};
+};
+
+&i2c5 {
 	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen: touchscreen@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&vreg_l14a_1p8>;
+		/*
+		 * This is a blatant abuse of OF, but the panel driver *needs*
+		 * to probe first, as the power/gpio switching needs to be precisely
+		 * timed in order for both the display and touch panel to function properly.
+		 */
+		incell-supply = <&panel>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <1000>;
 
-	/* Synaptics touchscreen @ 2c, 3c */
+		pinctrl-0 = <&ts_default>;
+		pinctrl-1 = <&ts_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
 };
 
 &i2c10 {
@@ -388,6 +490,31 @@
 	/* AMS TCS3490 RGB+IR color sensor @ 72 */
 };
 
+&ibb {
+	qcom,discharge-resistor-kohms = <300>;
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5700000>;
+	regulator-min-microamp = <0>;
+	regulator-max-microamp = <800000>;
+	regulator-over-current-protection;
+	regulator-soft-start;
+	regulator-pull-down;
+};
+
+&lab {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5700000>;
+	regulator-min-microamp = <200000>;
+	regulator-max-microamp = <200000>;
+	regulator-over-current-protection;
+	regulator-soft-start;
+	regulator-pull-down;
+};
+
+&mdss {
+	status = "okay";
+};
+
 &pm8998_gpios {
 	focus_n: focus-n-state {
 		pins = "gpio2";
@@ -422,6 +549,16 @@
 	};
 };
 
+&pmi8998_wled {
+	default-brightness = <800>;
+	qcom,switching-freq = <800>;
+	qcom,ovp-millivolt = <29600>;
+	qcom,current-boost-limit = <970>;
+	qcom,current-limit-microamp = <20000>;
+	qcom,enabled-strings = <0 1 2 3>;
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -465,6 +602,59 @@
 			bias-pull-up;
 		};
 	};
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_sleep: sde-dsi-sleep-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active_sleep: sde-te-active-sleep-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_default: ts-default-state {
+		reset-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		int-pins {
+			pins = "gpio125";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	ts_sleep: ts-sleep-state {
+		reset-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		int-pins {
+			pins = "gpio125";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
 };
 
 &uart6 {
@@ -500,3 +690,8 @@
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p1>;
 };
+
+&venus {
+	firmware-name = "qcom/sdm845/Sony/tama/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
index 0d7c37f39176..c15d48860646 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
@@ -80,7 +80,6 @@
 		pins = "gpio54";
 		function = "gpio";
 
-		input-enable;
 		bias-pull-down;
 		drive-strength = <2>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index e0fda4d754fe..5ed975cc6ecb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -2,6 +2,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
@@ -232,9 +233,6 @@
 		vddpos-supply = <&lab>;
 		vddneg-supply = <&ibb>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		backlight = <&pmi8998_wled>;
 		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
 
@@ -322,6 +320,16 @@
 	};
 };
 
+&pmi8998_lpg {
+	status = "okay";
+
+	led@5 {
+		reg = <5>;
+		color = <LED_COLOR_ID_WHITE>;
+		function = LED_FUNCTION_STATUS;
+	};
+};
+
 &pmi8998_wled {
 	status = "okay";
 	qcom,current-boost-limit = <970>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
index 8e176111e599..e9427851ebaa 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
@@ -10,6 +10,6 @@
 };
 
 &display_panel {
-	compatible = "tianma,fhd-video";
+	compatible = "tianma,fhd-video", "novatek,nt36672a";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 1b7fdbae6a2b..8ae0ffccaab2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -586,7 +586,6 @@
 		function = "gpio";
 		bias-pull-down;
 		drive-strength = <16>;
-		input-enable;
 	};
 
 	ts_reset_sleep: ts-reset-sleep-state {
@@ -601,7 +600,6 @@
 		function = "gpio";
 		bias-pull-down;
 		drive-strength = <2>;
-		input-enable;
 	};
 
 	sde_dsi_active: sde-dsi-active-state {
@@ -712,7 +710,5 @@
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
-
-	qcom,snoc-host-cap-skip-quirk;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 479859bd8ab3..90424442bb4a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sdm845.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
@@ -92,9 +93,10 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -118,9 +120,10 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -140,9 +143,10 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -162,9 +166,10 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -184,6 +189,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -206,6 +212,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -228,6 +235,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -250,6 +258,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -331,12 +340,10 @@
 		domain-idle-states {
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-power-collapse";
 				arm,psci-suspend-param = <0x4100c244>;
 				entry-latency-us = <3263>;
 				exit-latency-us = <6562>;
 				min-residency-us = <9987>;
-				local-timer-stop;
 			};
 		};
 	};
@@ -870,6 +877,14 @@
 			size = <0 0x4000>;
 			no-map;
 		};
+
+		fastrpc_mem: fastrpc {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
+			alignment = <0x0 0x400000>;
+			size = <0x0 0x1000000>;
+			reusable;
+		};
 	};
 
 	adsp_pas: remoteproc-adsp {
@@ -2192,8 +2207,11 @@
 
 		llcc: system-cache-controller@1100000 {
 			compatible = "qcom,sdm845-llcc";
-			reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>,
+			      <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
+			      <0 0x01300000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -2241,7 +2259,7 @@
 		};
 
 		pmu@1436400 {
-			compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon";
+			compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x01436400 0 0x600>;
 			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
@@ -2282,8 +2300,9 @@
 			reg = <0 0x01c00000 0 0x2000>,
 			      <0 0x60000000 0 0xf1d>,
 			      <0 0x60000f20 0 0xa8>,
-			      <0 0x60100000 0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "config";
+			      <0 0x60100000 0 0x100000>,
+			      <0 0x01c07000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "config", "mhi";
 			device_type = "pci";
 			linux,pci-domain = <0>;
 			bus-range = <0x00 0xff>;
@@ -2292,8 +2311,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -2319,7 +2338,6 @@
 				      "slave_q2a",
 				      "tbu";
 
-			iommus = <&apps_smmu 0x1c10 0xf>;
 			iommu-map = <0x0   &apps_smmu 0x1c10 0x1>,
 				    <0x100 &apps_smmu 0x1c11 0x1>,
 				    <0x200 &apps_smmu 0x1c12 0x1>,
@@ -2387,8 +2405,9 @@
 			reg = <0 0x01c08000 0 0x2000>,
 			      <0 0x40000000 0 0xf1d>,
 			      <0 0x40000f20 0 0xa8>,
-			      <0 0x40100000 0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "config";
+			      <0 0x40100000 0 0x100000>,
+			      <0 0x01c0c000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "config", "mhi";
 			device_type = "pci";
 			linux,pci-domain = <1>;
 			bus-range = <0x00 0xff>;
@@ -2397,7 +2416,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
@@ -2429,7 +2448,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1c00 0xf>;
 			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
 				    <0x100 &apps_smmu 0x1c01 0x1>,
 				    <0x200 &apps_smmu 0x1c02 0x1>,
@@ -2617,7 +2635,7 @@
 		};
 
 		cryptobam: dma-controller@1dc4000 {
-			compatible = "qcom,bam-v1.7.0";
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0 0x01dc4000 0 0x24000>;
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rpmhcc RPMH_CE_CLK>;
@@ -2758,12 +2776,17 @@
 				function = "qspi_cs";
 			};
 
-			qspi_data01: qspi-data01-state {
-				pins = "gpio91", "gpio92";
+			qspi_data0: qspi-data0-state {
+				pins = "gpio91";
 				function = "qspi_data";
 			};
 
-			qspi_data12: qspi-data12-state {
+			qspi_data1: qspi-data1-state {
+				pins = "gpio92";
+				function = "qspi_data";
+			};
+
+			qspi_data23: qspi-data23-state {
 				pins = "gpio93", "gpio94";
 				function = "qspi_data";
 			};
@@ -3163,7 +3186,6 @@
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			quat_mi2s_active: quat-mi2s-active-state {
@@ -3179,7 +3201,6 @@
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			quat_mi2s_sd0_active: quat-mi2s-sd0-active-state {
@@ -3194,7 +3215,6 @@
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			quat_mi2s_sd1_active: quat-mi2s-sd1-active-state {
@@ -3209,7 +3229,6 @@
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			quat_mi2s_sd2_active: quat-mi2s-sd2-active-state {
@@ -3224,7 +3243,6 @@
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			quat_mi2s_sd3_active: quat-mi2s-sd3-active-state {
@@ -3314,6 +3332,59 @@
 				      "gcc_gpu_gpll0_div_clk_src";
 		};
 
+		slpi_pas: remoteproc@5c00000 {
+			compatible = "qcom,sdm845-slpi-pas";
+			reg = <0 0x5c00000 0 0x4000>;
+
+			interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+						"handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			power-domains = <&rpmhpd SDM845_CX>,
+					<&rpmhpd SDM845_MX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apss_shared 24>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA
+						      QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>;
+					memory-region = <&fastrpc_mem>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@0 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <0>;
+					};
+				};
+			};
+		};
+
 		stm@6002000 {
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0 0x06002000 0 0x1000>,
@@ -4924,7 +4995,6 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
-			cell-index = <0>;
 		};
 
 		sram@146bf000 {
@@ -5222,7 +5292,7 @@
 		};
 
 		cpufreq_hw: cpufreq@17d43000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 
@@ -5232,6 +5302,7 @@
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		wifi: wifi@18800000 {
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 67d2a663ce75..1326c171fe72 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -606,7 +606,6 @@
 		pins = "gpio37";
 		function = "gpio";
 
-		input-enable;
 		bias-pull-up;
 		drive-strength = <2>;
 	};
@@ -615,7 +614,6 @@
 		pins = "gpio125";
 		function = "gpio";
 
-		input-enable;
 		bias-pull-up;
 		drive-strength = <2>;
 	};
@@ -624,7 +622,6 @@
 		pins = "gpio92";
 		function = "gpio";
 
-		input-enable;
 		bias-pull-up;
 		drive-strength = <2>;
 	};
@@ -633,7 +630,6 @@
 		pins = "gpio124";
 		function = "gpio";
 
-		input-enable;
 		bias-disable;
 	};
 
@@ -641,7 +637,6 @@
 		pins = "gpio95";
 		function = "gpio";
 
-		input-enable;
 		bias-disable;
 	};
 };
@@ -753,7 +748,7 @@
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
-			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -761,7 +756,7 @@
 
 		right_spkr: speaker@0,4 {
 			compatible = "sdw10217211000";
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
 			reg = <0 4>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index 9850140514ba..41f59e32af64 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -662,7 +662,7 @@
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
-			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -670,7 +670,7 @@
 
 		right_spkr: speaker@0,4 {
 			compatible = "sdw10217211000";
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
 			reg = <0 4>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index a3f1c7c41fd7..a1f0622db5a0 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -202,12 +202,22 @@
 	vqmmc-supply = <&vreg_l5a>;
 
 	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
 
 	status = "okay";
 };
 
 &tlmm {
 	gpio-reserved-ranges = <14 4>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &ufs_mem_hc {
@@ -225,11 +235,16 @@
 	status = "okay";
 };
 
-&usb_1 {
+&usb {
 	status = "okay";
 };
 
-&usb_1_hsphy {
+&usb_dwc3 {
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
 	vdd-supply = <&vreg_l4a>;
 	vdda-pll-supply = <&vreg_l12a>;
 	vdda-phy-dpdm-supply = <&vreg_l15a>;
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 4d6ec815b78b..631ca327e064 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -5,8 +5,10 @@
 
 #include <dt-bindings/clock/qcom,gcc-sm6115.h>
 #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+#include <dt-bindings/clock/qcom,sm6115-gpucc.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -39,6 +41,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
@@ -54,6 +57,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x1>;
+			clocks = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
@@ -65,6 +69,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x2>;
+			clocks = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
@@ -76,6 +81,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x3>;
+			clocks = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
@@ -87,6 +93,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
@@ -102,6 +109,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x101>;
+			clocks = <&cpufreq_hw 1>;
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
@@ -113,6 +121,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x102>;
+			clocks = <&cpufreq_hw 1>;
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
@@ -124,6 +133,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x103>;
+			clocks = <&cpufreq_hw 1>;
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
@@ -281,6 +291,15 @@
 			reg = <0x0 0x60000000 0x0 0x3900000>;
 			no-map;
 		};
+
+		rmtfs_mem: memory@89b01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x89b01000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+		};
 	};
 
 	rpm-glink {
@@ -595,13 +614,6 @@
 					bias-pull-up;
 					drive-strength = <10>;
 				};
-
-				sd-cd-pins {
-					pins = "gpio88";
-					function = "gpio";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
 			};
 
 			sdc2_state_off: sdc2-off-state {
@@ -622,13 +634,6 @@
 					bias-pull-up;
 					drive-strength = <2>;
 				};
-
-				sd-cd-pins {
-					pins = "gpio88";
-					function = "gpio";
-					bias-disable;
-					drive-strength = <2>;
-				};
 			};
 		};
 
@@ -642,7 +647,7 @@
 			#power-domain-cells = <1>;
 		};
 
-		usb_1_hsphy: phy@1613000 {
+		usb_hsphy: phy@1613000 {
 			compatible = "qcom,sm6115-qusb2-phy";
 			reg = <0x0 0x01613000 0x0 0x180>;
 			#phy-cells = <0>;
@@ -731,10 +736,6 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
-			pinctrl-0 = <&sdc1_state_on>;
-			pinctrl-1 = <&sdc1_state_off>;
-			pinctrl-names = "default", "sleep";
-
 			bus-width = <8>;
 			status = "disabled";
 		};
@@ -753,10 +754,6 @@
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
-			pinctrl-0 = <&sdc2_state_on>;
-			pinctrl-1 = <&sdc2_state_off>;
-			pinctrl-names = "default", "sleep";
-
 			power-domains = <&rpmpd SM6115_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0x00a0 0x0>;
@@ -1078,10 +1075,11 @@
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				status = "disabled";
 			};
 		};
 
-		usb_1: usb@4ef8800 {
+		usb: usb@4ef8800 {
 			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
 			reg = <0x0 0x04ef8800 0x0 0x400>;
 			#address-cells = <2>;
@@ -1109,11 +1107,11 @@
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
-			usb_1_dwc3: usb@4e00000 {
+			usb_dwc3: usb@4e00000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x04e00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb_1_hsphy>;
+				phys = <&usb_hsphy>;
 				phy-names = "usb2-phy";
 				iommus = <&apps_smmu 0x120 0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -1121,11 +1119,46 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
-				maximum-speed = "high-speed";
-				dr_mode = "peripheral";
 			};
 		};
 
+		gpucc: clock-controller@5990000 {
+			compatible = "qcom,sm6115-gpucc";
+			reg = <0x0 0x05990000 0x0 0x9000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@59a0000 {
+			compatible = "qcom,sm6115-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x059a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "mem",
+				      "hlos",
+				      "iface";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
 		mdss: display-subsystem@5e00000 {
 			compatible = "qcom,sm6115-mdss";
 			reg = <0x0 0x05e00000 0x0 0x1000>;
@@ -1218,7 +1251,7 @@
 			};
 
 			mdss_dsi0: dsi@5e94000 {
-				compatible = "qcom,dsi-ctrl-6g-qcm2290";
+				compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0x0 0x05e94000 0x0 0x400>;
 				reg-names = "dsi_ctrl";
 
@@ -1322,6 +1355,39 @@
 			#power-domain-cells = <1>;
 		};
 
+		remoteproc_mpss: remoteproc@6080000 {
+			compatible = "qcom,sm6115-mpss-pas";
+			reg = <0x0 0x06080000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 12>;
+			};
+		};
+
 		stm@8002000 {
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0x0 0x08002000 0x0 0x1000>,
@@ -1934,6 +2000,157 @@
 			};
 		};
 
+		remoteproc_adsp: remoteproc@ab00000 {
+			compatible = "qcom,sm6115-adsp-pas";
+			reg = <0x0 0x0ab00000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6115_VDD_LPI_CX>,
+					<&rpmpd SM6115_VDD_LPI_MX>;
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 8>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x01c3 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x01c4 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x01c5 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x01c6 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x01c7 0x0>;
+					};
+				};
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@b300000 {
+			compatible = "qcom,sm6115-cdsp-pas";
+			reg = <0x0 0x0b300000 0x0 0x100000>;
+
+			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+				mboxes = <&apcs_glb 28>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0c01 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0c02 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0c03 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x0c04 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x0c05 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x0c06 0x0>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0 0x0c600000 0x0 0x80000>;
@@ -2037,7 +2254,8 @@
 		};
 
 		apcs_glb: mailbox@f111000 {
-			compatible = "qcom,sm6115-apcs-hmss-global";
+			compatible = "qcom,sm6115-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
 			reg = <0x0 0x0f111000 0x0 0x1000>;
 
 			#mbox-cells = <1>;
@@ -2114,7 +2332,7 @@
 		};
 
 		cpufreq_hw: cpufreq@f521000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sm6115-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0x0 0x0f521000 0x0 0x1000>,
 			      <0x0 0x0f523000 0x0 0x1000>;
 
@@ -2123,6 +2341,7 @@
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
index 4ce2d905d70e..ea3340d31110 100644
--- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -49,7 +49,18 @@
 			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 			linux,can-disable;
-			gpio-key,wakeup;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x20000>;
+			ecc-size = <16>;
 		};
 	};
 };
@@ -78,6 +89,21 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/sm6115/LENOVO/J606F/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm6115/LENOVO/J606F/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm6115/LENOVO/J606F/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -273,17 +299,31 @@
 	status = "okay";
 };
 
-&usb_1 {
+&usb {
 	status = "okay";
 };
 
-&usb_1_hsphy {
+&usb_dwc3 {
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
 	vdd-supply = <&pm6125_l4>;
 	vdda-pll-supply = <&pm6125_l12>;
 	vdda-phy-dpdm-supply = <&pm6125_l15>;
 	status = "okay";
 };
 
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pm6125_l8>;
+	vdd-1.8-xo-supply = <&pm6125_l16>;
+	vdd-1.3-rfa-supply = <&pm6125_l17>;
+	vdd-3.3-ch0-supply = <&pm6125_l23>;
+	qcom,ath10k-calibration-variant = "Lenovo_P11";
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index b22b3f9a910d..9f8a9ef398a2 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -468,7 +468,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
new file mode 100644
index 000000000000..b1038eb8cebc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Lux Aliaga <they@mint.lgbt>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "sm6125.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+	model = "Xiaomi Mi A3";
+	compatible = "xiaomi,laurel-sprout", "qcom,sm6125";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <394 0>; /* sm6125 v1 */
+	qcom,board-id = <11 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1560 * 720 * 4)>;
+			width = <720>;
+			height = <1560>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	reserved-memory {
+		debug_mem: debug@ffb00000 {
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: lastlog@ffbc0000 {
+			reg = <0x0 0xffbc0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc40000 0x0 0xc0000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			msg-size = <0x20000 0x20000>;
+		};
+
+		cmdline_mem: memory@ffd00000 {
+			reg = <0x0 0xffd40000 0x0 0x1000>;
+			no-map;
+		};
+	};
+
+	extcon_usb: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	thermal-zones {
+		rf-pa0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <5000>;
+			thermal-sensors = <&pm6125_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l10a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&pm6125_adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>;
+
+	adc-chan@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "rf_pa0_therm";
+	};
+
+	adc-chan@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "quiet_therm";
+	};
+
+	adc-chan@52 {
+		reg = <ADC5_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "camera_flash_therm";
+	};
+
+	adc-chan@54 {
+		reg = <ADC5_GPIO3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "emmc_ufs_therm";
+	};
+};
+
+&pm6125_adc_tm {
+	status = "okay";
+
+	rf-pa0-therm@0 {
+		reg = <0>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	xo-therm@2 {
+		reg = <2>;
+		io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6125_gpios {
+	camera_flash_therm: camera-flash-therm-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	emmc_ufs_therm: emmc-ufs-therm-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	vol_up_n: vol-up-n-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <1422000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+		};
+
+		vreg_l2a: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1056000>;
+		};
+
+		vreg_l3a: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1064000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1996000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1264000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2856000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <22 2>, <28 6>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l24a>;
+	vccq2-supply = <&vreg_l11a>;
+	vcc-max-microamp = <600000>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l10a>;
+	vdda-phy-max-microamp = <51400>;
+	vdda-pll-max-microamp = <14200>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 65033227718a..9484752fb850 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -737,6 +737,70 @@
 			status = "disabled";
 		};
 
+		ufs_mem_hc: ufs@4804000 {
+			compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
+			freq-table-hz = <50000000 240000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+			#reset-cells = <1>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			lanes-per-direction = <1>;
+
+			iommus = <&apps_smmu 0x200 0x0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@4807000 {
+			compatible = "qcom,sm6125-qmp-ufs-phy";
+			reg = <0x04807000 0xdb8>;
+
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref",
+				      "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		gpi_dma0: dma-controller@4a00000 {
 			compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
 			reg = <0x04a00000 0x60000>;
@@ -1134,7 +1198,6 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
-			cell-index = <0>;
 		};
 
 		apps_smmu: iommu@c600000 {
@@ -1211,7 +1274,8 @@
 		};
 
 		apcs_glb: mailbox@f111000 {
-			compatible = "qcom,sm6125-apcs-hmss-global";
+			compatible = "qcom,sm6125-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
 			reg = <0x0f111000 0x1000>;
 
 			#mbox-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 4916d0db5b47..dddd6e44d280 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -233,7 +233,6 @@
 			regulator-allow-set-load;
 			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
-
 		};
 
 		pm6150l_l7: ldo7 {
@@ -255,7 +254,6 @@
 			regulator-allow-set-load;
 			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 						   RPMH_REGULATOR_MODE_HPM>;
-
 		};
 
 		pm6150l_l10: ldo10 {
@@ -369,7 +367,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 1e1d366c92c1..18c4616848ce 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -46,6 +46,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -71,6 +72,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -92,6 +94,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -113,6 +116,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -134,6 +138,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -155,6 +160,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -170,13 +176,13 @@
 				cache-level = <2>;
 				next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1894>;
 			dynamic-power-coefficient = <703>;
@@ -198,6 +204,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1894>;
 			dynamic-power-coefficient = <703>;
@@ -880,7 +887,6 @@
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				status = "disabled";
 			};
-
 		};
 
 		config_noc: interconnect@1500000 {
@@ -1348,7 +1354,7 @@
 		system-cache-controller@9200000 {
 			compatible = "qcom,sm6350-llcc";
 			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg-names = "llcc0_base", "llcc_broadcast_base";
 		};
 
 		gem_noc: interconnect@9680000 {
@@ -1995,13 +2001,14 @@
 		};
 
 		cpufreq_hw: cpufreq@18323000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sm6350-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>;
 			reg-names = "freq-domain0", "freq-domain1";
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
index b691c3834b6b..8220e6f44117 100644
--- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -46,6 +46,23 @@
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&vol_down_n>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
 	reserved-memory {
 		cont_splash_mem: memory@85200000 {
 			reg = <0 0x85200000 0 0xc00000>;
@@ -133,6 +150,16 @@
 	status = "okay";
 };
 
+&pmr735a_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 31b88c738510..ae9b6bc446cb 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/clock/qcom,sm6375-gcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -39,6 +40,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -58,6 +60,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -74,6 +77,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -90,6 +94,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -106,6 +111,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -122,6 +128,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -132,13 +139,13 @@
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -155,6 +162,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -208,6 +216,16 @@
 
 			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
+				idle-state-name = "silver-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <702>;
@@ -218,6 +236,16 @@
 
 			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
+				idle-state-name = "gold-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <523>;
+				exit-latency-us = <1244>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <526>;
@@ -230,12 +258,10 @@
 		domain-idle-states {
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-power-collapse";
 				arm,psci-suspend-param = <0x41000044>;
 				entry-latency-us = <2752>;
 				exit-latency-us = <3048>;
 				min-residency-us = <6118>;
-				local-timer-stop;
 			};
 		};
 	};
@@ -267,49 +293,49 @@
 		CPU_PD0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 		};
 
 		CPU_PD1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 		};
 
 		CPU_PD2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 		};
 
 		CPU_PD3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 		};
 
 		CPU_PD4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 		};
 
 		CPU_PD5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 		};
 
 		CPU_PD6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
 		};
 
 		CPU_PD7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
 		};
 
 		CLUSTER_PD: power-domain-cpu-cluster0 {
@@ -424,6 +450,15 @@
 			no-map;
 		};
 
+		rmtfs_mem: rmtfs@f3900000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf3900000 0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+		};
+
 		debug_mem: debug@ffb00000 {
 			reg = <0 0xffb00000 0 0xc0000>;
 			no-map;
@@ -555,6 +590,47 @@
 		};
 	};
 
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wlan_smp2p_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -713,11 +789,38 @@
 			#interrupt-cells = <4>;
 		};
 
+		tsens0: thermal-sensor@4411000 {
+			compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+			reg = <0 0x04411000 0 0x140>, /* TM */
+			      <0 0x04410000 0 0x20>;  /* SROT */
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <15>;
+		};
+
+		tsens1: thermal-sensor@4413000 {
+			compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+			reg = <0 0x04413000 0 0x140>, /* TM */
+			      <0 0x04412000 0 0x20>;  /* SROT */
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <11>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0 0x045f0000 0 0x7000>;
 		};
 
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0 0x04690000 0 0x400>;
+		};
+
 		sdhc_2: mmc@4784000 {
 			compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x04784000 0 0x1000>;
@@ -1155,6 +1258,47 @@
 			};
 		};
 
+		remoteproc_mss: remoteproc@6000000 {
+			compatible = "qcom,sm6375-mpss-pas";
+			reg = <0 0x06000000 0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDDCX>;
+			power-domain-names = "cx";
+
+			memory-region = <&pil_mpss_wlan_mem>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
 		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6375-adsp-pas";
 			reg = <0 0x0a400000 0 0x100>;
@@ -1209,6 +1353,7 @@
 			clock-names = "xo";
 
 			power-domains = <&rpmpd SM6375_VDDCX>;
+			power-domain-names = "cx";
 
 			memory-region = <&pil_cdsp_mem>;
 
@@ -1228,6 +1373,20 @@
 			};
 		};
 
+		sram@c125000 {
+			compatible = "qcom,sm6375-imem", "syscon", "simple-mfd";
+			reg = <0 0x0c125000 0 0x1000>;
+			ranges = <0 0 0x0c125000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
 			reg = <0 0x0c600000 0 0x100000>;
@@ -1304,6 +1463,28 @@
 			#iommu-cells = <2>;
 		};
 
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x0c800000 0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&pil_wlan_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x80 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
 		intc: interrupt-controller@f200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x0f200000 0x0 0x10000>,  /* GICD */
@@ -1372,6 +1553,15 @@
 			};
 		};
 
+		cpucp_l3: interconnect@fd90000 {
+			compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3";
+			reg = <0 0x0fd90000 0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@fd91000 {
 			compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss";
 			reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>;
@@ -1383,6 +1573,711 @@
 				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		mapss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				mapss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss0_crit: mapss-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-unk0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu_unk0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-unk1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu_unk1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0_crit: gpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1_crit: gpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mapss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				mapss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss1_crit: mapss-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cwlan-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cwlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cwlan_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cwlan_crit: cwlan-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				audio_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				audio_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				audio_crit: audio-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				ddr_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr_crit: ddr-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6hvx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				q6hvx_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				q6hvx_crit: q6hvx-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_crit: camera-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				mdm_core0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core0_crit: mdm-core0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mdm_core1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core1_crit: mdm-core1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-vec-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				mdm_vec_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_vec_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_vec_crit: mdm-vec-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		msm-scl-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				msm_scl_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				msm_scl_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				msm_scl_crit: msm-scl-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_crit: video-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index 8f014a232526..c0200e7f3f74 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -359,6 +359,11 @@
 };
 
 &gpu {
+	/*
+	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
+	 * after display support is added on this board.
+	 */
+	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index 69024f7c7f10..b039773c4465 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -479,7 +479,6 @@
 		pins = "gpio42";
 		function = "gpio";
 		bias-pull-up;
-		input-enable;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index eff995a07ab7..34ec84916bdd 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -354,6 +354,11 @@
 };
 
 &gpu {
+	/*
+	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
+	 * after display support is added on this board.
+	 */
+	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index ff77cc3c879a..47e2430991ca 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -59,7 +59,7 @@
 			gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 			linux,can-disable;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key-camera-snapshot {
@@ -68,7 +68,7 @@
 			gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 			linux,can-disable;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key-vol-down {
@@ -77,7 +77,7 @@
 			gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 			linux,can-disable;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index fd20096cfc6e..2273fa571988 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -48,6 +48,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <488>;
 			dynamic-power-coefficient = <232>;
@@ -74,6 +75,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <488>;
 			dynamic-power-coefficient = <232>;
@@ -90,13 +92,13 @@
 				cache-level = <2>;
 				next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <488>;
 			dynamic-power-coefficient = <232>;
@@ -119,6 +121,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <488>;
 			dynamic-power-coefficient = <232>;
@@ -141,6 +144,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <369>;
@@ -163,6 +167,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <369>;
@@ -185,6 +190,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <369>;
@@ -207,6 +213,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <421>;
@@ -288,12 +295,10 @@
 		domain-idle-states {
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-power-collapse";
 				arm,psci-suspend-param = <0x4100c244>;
 				entry-latency-us = <3263>;
 				exit-latency-us = <6562>;
 				min-residency-us = <9987>;
-				local-timer-stop;
 			};
 		};
 	};
@@ -945,6 +950,17 @@
 			status = "disabled";
 		};
 
+		qfprom: efuse@784000 {
+			compatible = "qcom,sm8150-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@133 {
+				reg = <0x133 0x1>;
+				bits = <5 3>;
+			};
+		};
 
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
@@ -1334,6 +1350,20 @@
 				status = "disabled";
 			};
 
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				reg-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart9_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c10: i2c@a88000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a88000 0 0x4000>;
@@ -1772,8 +1802,11 @@
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sm8150-llcc";
-			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -1799,8 +1832,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1826,7 +1859,6 @@
 				      "slave_q2a",
 				      "tbu";
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1895,7 +1927,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
@@ -1925,7 +1957,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 
@@ -2133,15 +2164,7 @@
 		};
 
 		gpu: gpu@2c00000 {
-			/*
-			 * note: the amd,imageon compatible makes it possible
-			 * to use the drm/msm driver without the display node,
-			 * make sure to remove it when display node is added
-			 */
-			compatible = "qcom,adreno-640.1",
-				     "qcom,adreno",
-				     "amd,imageon";
-
+			compatible = "qcom,adreno-640.1", "qcom,adreno";
 			reg = <0 0x02c00000 0 0x40000>;
 			reg-names = "kgsl_3d0_reg_memory";
 
@@ -2153,44 +2176,52 @@
 
 			qcom,gmu = <&gmu>;
 
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
 			status = "disabled";
 
 			zap-shader {
 				memory-region = <&gpu_mem>;
 			};
 
-			/* note: downstream checks gpu binning for 675 Mhz */
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-675000000 {
 					opp-hz = /bits/ 64 <675000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-supported-hw = <0x2>;
 				};
 
 				opp-585000000 {
 					opp-hz = /bits/ 64 <585000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0x3>;
 				};
 
 				opp-499200000 {
 					opp-hz = /bits/ 64 <499200000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-supported-hw = <0x3>;
 				};
 
 				opp-427000000 {
 					opp-hz = /bits/ 64 <427000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0x3>;
 				};
 
 				opp-345000000 {
 					opp-hz = /bits/ 64 <345000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0x3>;
 				};
 
 				opp-257000000 {
 					opp-hz = /bits/ 64 <257000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0x3>;
 				};
 			};
 		};
@@ -2249,7 +2280,8 @@
 		};
 
 		adreno_smmu: iommu@2ca0000 {
-			compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
+			compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x02ca0000 0 0x10000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
@@ -2425,6 +2457,13 @@
 				bias-disable;
 			};
 
+			qup_uart9_default: qup-uart9-default-state {
+				pins = "gpio41", "gpio42";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			qup_i2c10_default: qup-i2c10-default-state {
 				pins = "gpio9", "gpio10";
 				function = "qup10";
@@ -3935,7 +3974,6 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
-			cell-index = <0>;
 		};
 
 		apps_smmu: iommu@15000000 {
@@ -4097,7 +4135,8 @@
 		};
 
 		apss_shared: mailbox@17c00000 {
-			compatible = "qcom,sm8150-apss-shared";
+			compatible = "qcom,sm8150-apss-shared",
+				     "qcom,sdm845-apss-shared";
 			reg = <0x0 0x17c00000 0x0 0x1000>;
 			#mbox-cells = <1>;
 		};
@@ -4263,7 +4302,7 @@
 		};
 
 		cpufreq_hw: cpufreq@18323000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>,
 			      <0 0x18327800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1",
@@ -4273,6 +4312,7 @@
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		lmh_cluster1: lmh@18350800 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index e54cdc8bc31f..4c9de236676d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -764,7 +764,7 @@
 	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
-		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrLeft";
 		#sound-dai-cells = <0>;
@@ -773,7 +773,7 @@
 	right_spkr: speaker@0,4 {
 		compatible = "sdw10217211000";
 		reg = <0 4>;
-		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrRight";
 		#sound-dai-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index 5ecf7dafb2ec..01fe3974ee72 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -26,7 +26,7 @@
 		gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
 		debounce-interval = <15>;
 		linux,can-disable;
-		gpio-key,wakeup;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index b9c982a059df..2f22d348d45d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -63,7 +63,7 @@
 			gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 			linux,can-disable;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -625,7 +625,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	ap2mdm_default: ap2mdm-default-state {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
new file mode 100644
index 000000000000..8b2ae39950ff
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm8250-xiaomi-elish-common.dtsi"
+
+/ {
+	model = "Xiaomi Mi Pad 5 Pro (BOE)";
+	compatible = "xiaomi,elish", "qcom,sm8250";
+};
+
+&display_panel {
+	compatible = "xiaomi,elish-boe-nt36523";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index acaa99c5ff8b..8af6a0120a50 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -3,9 +3,8 @@
  * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com>
  */
 
-/dts-v1/;
-
 #include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
@@ -24,8 +23,6 @@
 /delete-node/ &xbl_aop_mem;
 
 / {
-	model = "Xiaomi Mi Pad 5 Pro";
-	compatible = "xiaomi,elish", "qcom,sm8250";
 	classis-type = "tablet";
 
 	/* required for bootloader to select correct board */
@@ -95,7 +92,7 @@
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <15>;
 			linux,can-disable;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -473,6 +470,76 @@
 	status = "okay";
 };
 
+&dsi0 {
+	vdda-supply = <&vreg_l9a_1p2>;
+	qcom,dual-dsi-mode;
+	qcom,sync-dual-dsi;
+	qcom,master-dsi;
+	status = "okay";
+
+	display_panel: panel@0 {
+		reg = <0>;
+		vddio-supply = <&vreg_l14a_1p88>;
+		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				panel_in_0: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1{
+				reg = <1>;
+
+				panel_in_1: endpoint {
+					remote-endpoint = <&dsi1_out>;
+				};
+			};
+
+		};
+	};
+};
+
+&dsi0_out {
+	data-lanes = <0 1 2>;
+	remote-endpoint = <&panel_in_0>;
+};
+
+&dsi0_phy {
+	vdds-supply = <&vreg_l5a_0p88>;
+	phy-type = <PHY_TYPE_CPHY>;
+	status = "okay";
+};
+
+&dsi1 {
+	vdda-supply = <&vreg_l9a_1p2>;
+	qcom,dual-dsi-mode;
+	qcom,sync-dual-dsi;
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+	status = "okay";
+};
+
+&dsi1_out {
+	data-lanes = <0 1 2>;
+	remote-endpoint = <&panel_in_1>;
+};
+
+&dsi1_phy {
+	vdds-supply = <&vreg_l5a_0p88>;
+	phy-type = <PHY_TYPE_CPHY>;
+	status = "okay";
+};
+
 &gmu {
 	status = "okay";
 };
@@ -537,6 +604,10 @@
 	};
 };
 
+&mdss {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };
@@ -595,7 +666,7 @@
 
 &usb_1_dwc3 {
 	dr_mode = "peripheral";
-	maximum-spped = "high-speed";
+	maximum-speed = "high-speed";
 	/* Remove USB3 phy */
 	phys = <&usb_1_hsphy>;
 	phy-names = "usb2-phy";
@@ -625,6 +696,6 @@
 };
 
 &venus {
-	firmware-name = "qcom/sm8250/elish/venus.mbn";
+	firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts
new file mode 100644
index 000000000000..a4d5341495cf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm8250-xiaomi-elish-common.dtsi"
+
+/ {
+	model = "Xiaomi Mi Pad 5 Pro (CSOT)";
+	compatible = "xiaomi,elish", "qcom,sm8250";
+};
+
+&display_panel {
+	compatible = "xiaomi,elish-csot-nt36523";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 2f0e460acccd..7bea916900e2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -97,6 +97,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <205>;
@@ -127,6 +128,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <205>;
@@ -151,6 +153,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <205>;
@@ -175,6 +178,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <205>;
@@ -199,6 +203,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <379>;
@@ -223,6 +228,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <379>;
@@ -241,13 +247,13 @@
 				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <379>;
@@ -272,6 +278,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <444>;
@@ -355,12 +362,10 @@
 		domain-idle-states {
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-llcc-off";
 				arm,psci-suspend-param = <0x4100c244>;
 				entry-latency-us = <3264>;
 				exit-latency-us = <6562>;
 				min-residency-us = <9987>;
-				local-timer-stop;
 			};
 		};
 	};
@@ -955,6 +960,18 @@
 			#mbox-cells = <2>;
 		};
 
+		qfprom: efuse@784000 {
+			compatible = "qcom,sm8250-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@19b {
+				reg = <0x19b 0x1>;
+				bits = <5 3>;
+			};
+		};
+
 		rng: rng@793000 {
 			compatible = "qcom,prng-ee";
 			reg = <0 0x00793000 0 0x1000>;
@@ -1824,8 +1841,9 @@
 			      <0 0x60000000 0 0xf1d>,
 			      <0 0x60000f20 0 0xa8>,
 			      <0 0x60001000 0 0x1000>,
-			      <0 0x60100000 0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			      <0 0x60100000 0 0x100000>,
+			      <0 0x01c03000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
 			device_type = "pci";
 			linux,pci-domain = <0>;
 			bus-range = <0x00 0xff>;
@@ -1834,8 +1852,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
@@ -1871,7 +1889,6 @@
 				      "tbu",
 				      "ddrss_sf_tbu";
 
-			iommus = <&apps_smmu 0x1c00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
 				    <0x100 &apps_smmu 0x1c01 0x1>;
 
@@ -1933,8 +1950,9 @@
 			      <0 0x40000000 0 0xf1d>,
 			      <0 0x40000f20 0 0xa8>,
 			      <0 0x40001000 0 0x1000>,
-			      <0 0x40100000 0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			      <0 0x40100000 0 0x100000>,
+			      <0 0x01c0b000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
 			device_type = "pci";
 			linux,pci-domain = <1>;
 			bus-range = <0x00 0xff>;
@@ -1943,7 +1961,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
@@ -1977,7 +1995,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1c80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
@@ -2041,8 +2058,9 @@
 			      <0 0x64000000 0 0xf1d>,
 			      <0 0x64000f20 0 0xa8>,
 			      <0 0x64001000 0 0x1000>,
-			      <0 0x64100000 0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			      <0 0x64100000 0 0x100000>,
+			      <0 0x01c13000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
 			device_type = "pci";
 			linux,pci-domain = <2>;
 			bus-range = <0x00 0xff>;
@@ -2051,7 +2069,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
@@ -2085,7 +2103,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
 				    <0x100 &apps_smmu 0x1d01 0x1>;
 
@@ -2359,7 +2376,7 @@
 		swr2: soundwire-controller@3230000 {
 			reg = <0 0x03230000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
-			interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core";
 			status = "disabled";
 
@@ -2420,7 +2437,6 @@
 					drive-strength = <2>;
 					slew-rate = <1>;
 					bias-bus-hold;
-
 				};
 			};
 
@@ -2429,7 +2445,6 @@
 					pins = "gpio10";
 					function = "wsa_swr_clk";
 					drive-strength = <2>;
-					input-enable;
 					bias-pull-down;
 				};
 
@@ -2437,9 +2452,7 @@
 					pins = "gpio11";
 					function = "wsa_swr_data";
 					drive-strength = <2>;
-					input-enable;
 					bias-pull-down;
-
 				};
 			};
 
@@ -2454,7 +2467,6 @@
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <8>;
-					input-enable;
 				};
 			};
 
@@ -2472,7 +2484,6 @@
 					function = "dmic1_data";
 					drive-strength = <2>;
 					bias-pull-down;
-					input-enable;
 				};
 			};
 
@@ -2517,7 +2528,6 @@
 					pins = "gpio0";
 					function = "swr_tx_clk";
 					drive-strength = <2>;
-					input-enable;
 					bias-pull-down;
 				};
 
@@ -2525,7 +2535,6 @@
 					pins = "gpio1";
 					function = "swr_tx_data";
 					drive-strength = <2>;
-					input-enable;
 					bias-bus-hold;
 				};
 
@@ -2533,7 +2542,6 @@
 					pins = "gpio2";
 					function = "swr_tx_data";
 					drive-strength = <2>;
-					input-enable;
 					bias-pull-down;
 				};
 			};
@@ -2554,49 +2562,58 @@
 
 			qcom,gmu = <&gmu>;
 
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
 			status = "disabled";
 
 			zap-shader {
 				memory-region = <&gpu_mem>;
 			};
 
-			/* note: downstream checks gpu binning for 670 Mhz */
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-670000000 {
 					opp-hz = /bits/ 64 <670000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-supported-hw = <0xa>;
 				};
 
 				opp-587000000 {
 					opp-hz = /bits/ 64 <587000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0xb>;
 				};
 
 				opp-525000000 {
 					opp-hz = /bits/ 64 <525000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-supported-hw = <0xf>;
 				};
 
 				opp-490000000 {
 					opp-hz = /bits/ 64 <490000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0xf>;
 				};
 
 				opp-441600000 {
 					opp-hz = /bits/ 64 <441600000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					opp-supported-hw = <0xf>;
 				};
 
 				opp-400000000 {
 					opp-hz = /bits/ 64 <400000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0xf>;
 				};
 
 				opp-305000000 {
 					opp-hz = /bits/ 64 <305000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0xf>;
 				};
 			};
 		};
@@ -2656,7 +2673,8 @@
 		};
 
 		adreno_smmu: iommu@3da0000 {
-			compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
+			compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x03da0000 0 0x10000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <2>;
@@ -2763,6 +2781,73 @@
 			};
 		};
 
+		tpda@6004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0 0x06004000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					tpda_out_funnel_qatb: endpoint {
+						remote-endpoint = <&funnel_qatb_in_tpda>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@9 {
+					reg = <9>;
+					tpda_9_in_tpdm_mm: endpoint {
+						remote-endpoint = <&tpdm_mm_out_tpda9>;
+					};
+				};
+
+				port@17 {
+					reg = <23>;
+					tpda_23_in_tpdm_prng: endpoint {
+						remote-endpoint = <&tpdm_prng_out_tpda_23>;
+					};
+				};
+			};
+		};
+
+		funnel@6005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06005000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_qatb_out_funnel_in0: endpoint {
+						remote-endpoint = <&funnel_in0_in_funnel_qatb>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_qatb_in_tpda: endpoint {
+						remote-endpoint = <&tpda_out_funnel_qatb>;
+					};
+				};
+			};
+		};
+
 		funnel@6041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0 0x06041000 0 0x1000>;
@@ -2782,6 +2867,13 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@6 {
+					reg = <6>;
+					funnel_in0_in_funnel_qatb: endpoint {
+						remote-endpoint = <&funnel_qatb_out_funnel_in0>;
+					};
+				};
+
 				port@7 {
 					reg = <7>;
 					funnel0_in7: endpoint {
@@ -2799,11 +2891,7 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_in1_out_funnel_merg: endpoint {
 						remote-endpoint = <&funnel_merg_in_funnel_in1>;
 					};
@@ -2899,12 +2987,27 @@
 			};
 		};
 
+		tpdm@684c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0 0x0684c000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_prng_out_tpda_23: endpoint {
+						remote-endpoint = <&tpda_23_in_tpdm_prng>;
+					};
+				};
+			};
+		};
+
 		funnel@6b04000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			arm,primecell-periphid = <0x000bb908>;
 
 			reg = <0 0x06b04000 0 0x1000>;
-			reg-names = "funnel-base";
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2928,7 +3031,6 @@
 					};
 				};
 			};
-
 		};
 
 		etf@6b05000 {
@@ -2983,6 +3085,80 @@
 			};
 		};
 
+		tpdm@6c08000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0 0x06c08000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_mm_out_funnel_dl_mm: endpoint {
+						remote-endpoint = <&funnel_dl_mm_in_tpdm_mm>;
+					};
+				};
+			};
+		};
+
+		funnel@6c0b000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06c0b000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_dl_mm_out_funnel_dl_center: endpoint {
+					remote-endpoint = <&funnel_dl_center_in_funnel_dl_mm>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@3 {
+					reg = <3>;
+					funnel_dl_mm_in_tpdm_mm: endpoint {
+						remote-endpoint = <&tpdm_mm_out_funnel_dl_mm>;
+					};
+				};
+			};
+		};
+
+		funnel@6c2d000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06c2d000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port {
+					tpdm_mm_out_tpda9: endpoint {
+						remote-endpoint = <&tpda_9_in_tpdm_mm>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					reg = <2>;
+					funnel_dl_center_in_funnel_dl_mm: endpoint {
+					remote-endpoint = <&funnel_dl_mm_out_funnel_dl_center>;
+					};
+				};
+			};
+		};
+
 		etm@7040000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07040000 0 0x1000>;
@@ -3220,9 +3396,6 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				port {
 					funnel_apss_merg_out_funnel_in1: endpoint {
 					remote-endpoint = <&funnel_in1_in_funnel_apss_merg>;
@@ -3559,8 +3732,11 @@
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sm8250-llcc";
-			reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
 		};
 
 		usb_2: usb@a8f8800 {
@@ -5481,6 +5657,7 @@
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 09baf6959c71..2ee1b121686a 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -31,6 +31,40 @@
 		};
 	};
 
+	pmic-glink {
+		compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -644,7 +678,6 @@
 			bias-pull-up;
 		};
 	};
-
 };
 
 &uart2 {
@@ -674,8 +707,16 @@
 };
 
 &usb_1_dwc3 {
-	/* TODO: Define USB-C connector properly */
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
 &usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
index b536ae36ae6d..3bd5e57cbcda 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
@@ -341,6 +341,9 @@
 
 &usb_1 {
 	status = "okay";
+};
+
+&usb_1_dwc3 {
 	dr_mode = "peripheral";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index 89382ad73133..7ae1eb0a7cce 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -877,7 +877,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	sdc2_card_det_active: sd-card-det-active-state {
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 1c97e28da6ad..ebcb481571c2 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -49,6 +50,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo685";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -70,6 +72,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo685";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -87,6 +90,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo685";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -104,6 +108,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo685";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -121,6 +126,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo685";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -138,6 +144,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo685";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -149,13 +156,13 @@
 			      cache-level = <2>;
 			      next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo685";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -173,6 +180,7 @@
 			device_type = "cpu";
 			compatible = "qcom,kryo685";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
@@ -249,12 +257,10 @@
 		domain-idle-states {
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-power-collapse";
 				arm,psci-suspend-param = <0x4100c344>;
 				entry-latency-us = <3263>;
 				exit-latency-us = <6562>;
 				min-residency-us = <9987>;
-				local-timer-stop;
 			};
 		};
 	};
@@ -653,7 +659,7 @@
 				 <&ufs_mem_phy_lanes 0>,
 				 <&ufs_mem_phy_lanes 1>,
 				 <&ufs_mem_phy_lanes 2>,
-				 <0>,
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <0>;
 		};
 
@@ -1487,8 +1493,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
@@ -1526,7 +1532,6 @@
 				      "aggre1",
 				      "aggre0";
 
-			iommus = <&apps_smmu 0x1c00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
 				    <0x100 &apps_smmu 0x1c01 0x1>;
 
@@ -1581,8 +1586,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1610,7 +1615,6 @@
 				      "ddrss_sf_tbu",
 				      "aggre1";
 
-			iommus = <&apps_smmu 0x1c80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
@@ -1664,6 +1668,7 @@
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			clock-names =
 				"core_clk",
@@ -1907,7 +1912,8 @@
 		};
 
 		adreno_smmu: iommu@3da0000 {
-			compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
+			compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x03da0000 0 0x20000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <2>;
@@ -2125,37 +2131,24 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
-			compatible = "qcom,sm8350-qmp-usb3-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x20>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1_qmpphy: phy@88e9000 {
+			compatible = "qcom,sm8350-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
 		};
 
 		usb_2_qmpphy: phy-wrapper@88eb000 {
@@ -2204,8 +2197,11 @@
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sm8350-llcc";
-			reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
 		};
 
 		compute_noc: interconnect@a0c0000 {
@@ -2258,8 +2254,27 @@
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
 			};
 		};
 
@@ -2417,6 +2432,85 @@
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8350_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
 				};
 			};
 
@@ -2623,8 +2717,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
-				 <0>,
-				 <0>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
@@ -3240,6 +3334,7 @@
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		cdsp: remoteproc@98900000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index feef3837e4cd..e931545a2cac 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -25,7 +25,7 @@
 	};
 
 	wcd938x: audio-codec {
-		compatible = "qcom,wcd9380-codec";
+		compatible = "qcom,wcd9385-codec";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&wcd_default>;
@@ -87,6 +87,40 @@
 		enable-active-high;
 	};
 
+	pmic-glink {
+		compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -343,7 +377,6 @@
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
-
 	};
 
 	regulators-3 {
@@ -724,7 +757,16 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
 &usb_1_hsphy {
@@ -755,7 +797,7 @@
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio1";
 		function = "gpio";
-		drive-strength = <4>;
+		drive-strength = <16>;
 		bias-disable;
 		output-low;
 	};
@@ -763,14 +805,16 @@
 	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
 		pins = "gpio89";
 		function = "gpio";
-		drive-strength = <4>;
+		drive-strength = <16>;
 		bias-disable;
 		output-low;
 	};
 
-	wcd_default: wcd-default-state {
+	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio43";
 		function = "gpio";
+		drive-strength = <16>;
 		bias-disable;
+		output-low;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index f7592946c783..65a94dfaf5ae 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -282,7 +282,6 @@
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
-
 	};
 
 	regulators-3 {
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
index 67538b5a557e..001fb2723fbb 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -754,7 +754,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	telec_pwr_en: telec-pwr-en-state {
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1a744a33bcf4..595533aeafc4 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/interconnect/qcom,sm8450.h>
 #include <dt-bindings/soc/qcom,gpr.h>
@@ -154,7 +155,6 @@
 			      cache-level = <2>;
 			      next-level-cache = <&L3_0>;
 			};
-
 		};
 
 		CPU6: cpu@600 {
@@ -256,22 +256,18 @@
 		domain-idle-states {
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-l3-off";
 				arm,psci-suspend-param = <0x41000044>;
 				entry-latency-us = <1050>;
 				exit-latency-us = <2500>;
 				min-residency-us = <5309>;
-				local-timer-stop;
 			};
 
 			CLUSTER_SLEEP_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-power-collapse";
 				arm,psci-suspend-param = <0x4100c344>;
 				entry-latency-us = <2700>;
 				exit-latency-us = <3500>;
 				min-residency-us = <13959>;
-				local-timer-stop;
 			};
 		};
 	};
@@ -748,7 +744,7 @@
 				 <&ufs_mem_phy_lanes 0>,
 				 <&ufs_mem_phy_lanes 1>,
 				 <&ufs_mem_phy_lanes 2>,
-				 <0>;
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo",
 				      "sleep_clk",
 				      "pcie_0_pipe_clk",
@@ -1746,8 +1742,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
 			/*
 			 * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
@@ -1790,7 +1786,6 @@
 				      "aggre0",
 				      "aggre1";
 
-			iommus = <&apps_smmu 0x1c00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
 				    <0x100 &apps_smmu 0x1c01 0x1>;
 
@@ -1798,7 +1793,6 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_0_GDSC>;
-			power-domain-names = "gdsc";
 
 			phys = <&pcie0_lane>;
 			phy-names = "pciephy";
@@ -1862,8 +1856,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			/*
 			 * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
@@ -1904,7 +1898,6 @@
 				      "ddrss_sf_tbu",
 				      "aggre1";
 
-			iommus = <&apps_smmu 0x1c80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
@@ -1912,13 +1905,12 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_1_GDSC>;
-			power-domain-names = "gdsc";
 
 			phys = <&pcie1_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>;
-			enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
@@ -2034,37 +2026,24 @@
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
-			compatible = "qcom,sm8450-qmp-usb3-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x20>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8450-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
 		};
 
 		remoteproc_slpi: remoteproc@2400000 {
@@ -2143,8 +2122,8 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
@@ -2154,13 +2133,13 @@
 			#sound-dai-cells = <1>;
 		};
 
-		/* WSA2 */
 		swr4: soundwire-controller@31f0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x031f0000 0 0x2000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&wsa2macro>;
 			clock-names = "iface";
+			label = "WSA2";
 
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
@@ -2269,13 +2248,13 @@
 			#sound-dai-cells = <1>;
 		};
 
-		/* WSA */
 		swr0: soundwire-controller@3250000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03250000 0 0x2000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&wsamacro>;
 			clock-names = "iface";
+			label = "WSA";
 
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
@@ -2299,8 +2278,8 @@
 		swr2: soundwire-controller@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x033b0000 0 0x2000>;
-			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
 
 			clocks = <&vamacro>;
@@ -2763,6 +2742,12 @@
 						};
 					};
 
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -2795,6 +2780,78 @@
 				};
 			};
 
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sm8450-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0xc00>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8450_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -2972,8 +3029,8 @@
 				 <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>,
 				 <&mdss_dsi1_phy 1>,
-				 <0>, /* dp0 */
-				 <0>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
 				 <0>,
 				 <0>, /* dp2 */
@@ -3569,7 +3626,6 @@
 				pins = "gpio76", "gpio77", "gpio78", "gpio79";
 				function = "qup20";
 			};
-
 		};
 
 		lpass_tlmm: pinctrl@3440000 {
@@ -3632,7 +3688,6 @@
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <8>;
-					input-enable;
 				};
 			};
 
@@ -3648,7 +3703,6 @@
 					pins = "gpio9";
 					function = "dmic2_data";
 					drive-strength = <8>;
-					input-enable;
 				};
 			};
 
@@ -3689,6 +3743,20 @@
 			};
 		};
 
+		sram@146aa000 {
+			compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
+			reg = <0 0x146aa000 0 0x1000>;
+			ranges = <0 0 0x146aa000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
@@ -3981,8 +4049,11 @@
 
 		system-cache-controller@19200000 {
 			compatible = "qcom,sm8450-llcc";
-			reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>,
+			      <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>,
+			      <0 0x19a00000 0 0x80000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -4003,6 +4074,7 @@
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
@@ -4153,8 +4225,27 @@
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 5db6e789e6b8..e2b9bb6b1e27 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -27,6 +27,40 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -414,18 +448,27 @@
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
 	status = "okay";
 };
 
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1e_0p88>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
+
 	status = "okay";
 };
 
 &pcie1 {
 	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
 	status = "okay";
 };
 
@@ -433,6 +476,7 @@
 	vdda-phy-supply = <&vreg_l3c_0p91>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
 	vdda-qref-supply = <&vreg_l1e_0p88>;
+
 	status = "okay";
 };
 
@@ -447,6 +491,11 @@
 	};
 };
 
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -546,13 +595,24 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l1e_0p88>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&pm8550b_eusb2_repeater>;
+
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
new file mode 100644
index 000000000000..d5a645ee2a61
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8550 QRD";
+	compatible = "qcom,sm8550-qrd", "qcom,sm8550";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p25>;
+		vdd-l12-supply = <&vreg_s6g_1p86>;
+		vdd-l15-supply = <&vreg_s6g_1p86>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo2 supplies SM8550 VDD_LPI_MX */
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s4e_0p95: smps4 {
+			regulator-name = "vreg_s4e_0p95";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p08: smps5 {
+			regulator-name = "vreg_s5e_1p08";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p88: ldo3 {
+			regulator-name = "vreg_l3f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vreg_s1g_1p25: smps1 {
+			regulator-name = "vreg_s1g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p85: smps2 {
+			regulator-name = "vreg_s2g_0p85";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p8: smps3 {
+			regulator-name = "vreg_s3g_0p8";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p25: smps4 {
+			regulator-name = "vreg_s4g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p85: smps5 {
+			regulator-name = "vreg_s5g_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p86: smps6 {
+			regulator-name = "vreg_s6g_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/adsp.mbn",
+			"qcom/sm8550/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/cdsp.mbn",
+			"qcom/sm8550/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8550/modem.mbn",
+			"qcom/sm8550/modem_dtb.mbn";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vccq2-supply = <&vreg_l3g_1p2>;
+	vccq2-max-microamp = <100>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p88>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index ff4d342c0725..6e9bad8f6f33 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -66,8 +66,9 @@
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 			power-domains = <&CPU_PD0>;
@@ -89,8 +90,9 @@
 
 		CPU1: cpu@100 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
 			power-domains = <&CPU_PD1>;
@@ -108,8 +110,9 @@
 
 		CPU2: cpu@200 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
 			power-domains = <&CPU_PD2>;
@@ -127,8 +130,9 @@
 
 		CPU3: cpu@300 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a715";
 			reg = <0 0x300>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
 			power-domains = <&CPU_PD3>;
@@ -146,8 +150,9 @@
 
 		CPU4: cpu@400 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a715";
 			reg = <0 0x400>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
 			power-domains = <&CPU_PD4>;
@@ -165,8 +170,9 @@
 
 		CPU5: cpu@500 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a710";
 			reg = <0 0x500>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
 			power-domains = <&CPU_PD5>;
@@ -184,8 +190,9 @@
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a710";
 			reg = <0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
 			power-domains = <&CPU_PD6>;
@@ -203,8 +210,9 @@
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-x3";
 			reg = <0 0x700>;
+			clocks = <&cpufreq_hw 2>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
 			power-domains = <&CPU_PD7>;
@@ -412,7 +420,6 @@
 			no-map;
 		};
 
-
 		hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
 			reg = <0 0x811d0000 0 0x30000>;
 			no-map;
@@ -1653,8 +1660,8 @@
 			reg-names = "parf", "dbi", "elbi", "atu", "config";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 			bus-range = <0x00 0xff>;
 
 			dma-coherent;
@@ -1672,27 +1679,25 @@
 					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
-			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
-				 <&gcc GCC_PCIE_0_AUX_CLK>,
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
 				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
 				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
 				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
-			clock-names = "pipe",
-				      "aux",
+			clock-names = "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
 				      "slave_q2a",
 				      "ddrss_sf_tbu",
-				      "aggre0";
+				      "noc_aggr";
 
-			interconnect-names = "pcie-mem";
-			interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
 
-			iommus = <&apps_smmu 0x1400 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
 				    <0x100 &apps_smmu 0x1401 0x1>;
 
@@ -1704,12 +1709,6 @@
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
-			perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&pcie0_default_state>;
-
 			status = "disabled";
 		};
 
@@ -1752,8 +1751,8 @@
 			reg-names = "parf", "dbi", "elbi", "atu", "config";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 			bus-range = <0x00 0xff>;
 
 			dma-coherent;
@@ -1771,8 +1770,7 @@
 					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
-			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
-				 <&gcc GCC_PCIE_1_AUX_CLK>,
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
@@ -1780,42 +1778,34 @@
 				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
 				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
 				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
-			clock-names = "pipe",
-				      "aux",
+			clock-names = "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
 				      "slave_q2a",
 				      "ddrss_sf_tbu",
-				      "aggre1",
-				      "cnoc_pcie_sf_axi";
+				      "noc_aggr",
+				      "cnoc_sf_axi";
 
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			interconnect-names = "pcie-mem";
-			interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
 
-			iommus = <&apps_smmu 0x1480 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1480 0x1>,
 				    <0x100 &apps_smmu 0x1481 0x1>;
 
 			resets = <&gcc GCC_PCIE_1_BCR>,
 				<&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
-			reset-names = "pci",
-				"pcie_1_link_down_reset";
+			reset-names = "pci", "link_down";
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
-			perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
-			enable-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&pcie1_default_state>;
-
 			status = "disabled";
 		};
 
@@ -1823,18 +1813,17 @@
 			compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy";
 			reg = <0x0 0x01c0e000 0x0 0x2000>;
 
-			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
 				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
-				 <&gcc GCC_PCIE_1_PIPE_CLK>,
-				 <&gcc GCC_PCIE_1_PHY_AUX_CLK>;
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
 			clock-names = "aux", "cfg_ahb", "ref", "rchng",
-				      "pipe", "aux_phy";
+				      "pipe";
 
 			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
 				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
-			reset-names = "phy", "nocsr";
+			reset-names = "phy", "phy_nocsr";
 
 			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
 			assigned-clock-rates = <100000000>;
@@ -1861,7 +1850,7 @@
 		};
 
 		crypto: crypto@1de0000 {
-			compatible = "qcom,sm8550-qce";
+			compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce";
 			reg = <0x0 0x01dfa000 0x0 0x6000>;
 			dmas = <&cryptobam 4>, <&cryptobam 5>;
 			dma-names = "rx", "tx";
@@ -1905,6 +1894,7 @@
 			required-opps = <&rpmhpd_opp_nom>;
 
 			iommus = <&apps_smmu 0x60 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
@@ -1935,9 +1925,18 @@
 				<0 0>,
 				<0 0>,
 				<0 0>;
+			qcom,ice = <&ice>;
+
 			status = "disabled";
 		};
 
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8550-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0 0x01f40000 0 0x20000>;
@@ -1994,10 +1993,210 @@
 			};
 		};
 
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa2_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire-controller@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		<0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <10>;
+
+			qcom,ports-sinterval =		<0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire-controller@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		<0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire-controller@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_vamacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
 		lpass_tlmm: pinctrl@6e80000 {
 			compatible = "qcom,sm8550-lpass-lpi-pinctrl";
 			reg = <0 0x06e80000 0 0x20000>,
-			      <0 0x0725a000 0 0x10000>;
+			      <0 0x07250000 0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&lpass_tlmm 0 0 23>;
@@ -2005,6 +2204,110 @@
 			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "core", "audio";
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
 		};
 
 		lpass_lpiaon_noc: interconnect@7400000 {
@@ -2210,7 +2513,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -2302,8 +2606,10 @@
 
 				power-domains = <&rpmhpd SM8550_MMCX>;
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -2467,6 +2773,25 @@
 				phys = <&usb_1_hsphy>,
 				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
 			};
 		};
 
@@ -2691,7 +3016,7 @@
 				pins = "gpio28", "gpio29";
 				function = "qup1_se0";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
@@ -2699,7 +3024,7 @@
 				pins = "gpio32", "gpio33";
 				function = "qup1_se1";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
@@ -2707,7 +3032,7 @@
 				pins = "gpio36", "gpio37";
 				function = "qup1_se2";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
@@ -2715,7 +3040,7 @@
 				pins = "gpio40", "gpio41";
 				function = "qup1_se3";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
@@ -2723,7 +3048,7 @@
 				pins = "gpio44", "gpio45";
 				function = "qup1_se4";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
@@ -2731,7 +3056,7 @@
 				pins = "gpio52", "gpio53";
 				function = "qup1_se5";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
@@ -2739,7 +3064,7 @@
 				pins = "gpio48", "gpio49";
 				function = "qup1_se6";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
@@ -2747,14 +3072,14 @@
 					pins = "gpio57";
 					function = "qup2_se0_l1_mira";
 					drive-strength = <2>;
-					bias-pull-up;
+					bias-pull-up = <2200>;
 				};
 
 				sda-pins {
 					pins = "gpio56";
 					function = "qup2_se0_l0_mira";
 					drive-strength = <2>;
-					bias-pull-up;
+					bias-pull-up = <2200>;
 				};
 			};
 
@@ -2763,7 +3088,7 @@
 				pins = "gpio60", "gpio61";
 				function = "qup2_se1";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
@@ -2771,7 +3096,7 @@
 				pins = "gpio64", "gpio65";
 				function = "qup2_se2";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
@@ -2779,7 +3104,7 @@
 				pins = "gpio68", "gpio69";
 				function = "qup2_se3";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
@@ -2787,7 +3112,7 @@
 				pins = "gpio2", "gpio3";
 				function = "qup2_se4";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
@@ -2795,7 +3120,7 @@
 				pins = "gpio80", "gpio81";
 				function = "qup2_se5";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
@@ -2803,14 +3128,14 @@
 				pins = "gpio72", "gpio106";
 				function = "qup2_se7";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_spi0_cs: qup-spi0-cs-state {
-				cs-pins {
-					pins = "gpio31";
-					function = "qup1_se0";
-				};
+				pins = "gpio31";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
 			};
 
 			qup_spi0_data_clk: qup-spi0-data-clk-state {
@@ -3171,7 +3496,7 @@
 
 		intc: interrupt-controller@17100000 {
 			compatible = "arm,gic-v3";
-			reg = <0 0x17100000 0 0x10000>,	/* GICD */
+			reg = <0 0x17100000 0 0x10000>,		/* GICD */
 			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
 			ranges;
 			#interrupt-cells = <3>;
@@ -3339,6 +3664,7 @@
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		pmu@24091000 {
@@ -3391,7 +3717,7 @@
 		};
 
 		pmu@240b6400 {
-			compatible = "qcom,sm8550-cpu-bwmon", "qcom,msm8998-bwmon";
+			compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x240b6400 0 0x600>;
 			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 0699b51c1247..f130165577a8 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -28,10 +28,6 @@ dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb
 dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb
 
-dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
-dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb-kf.dtb
-
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb
@@ -67,6 +63,7 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f0-spider.dtb
 
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtbo
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
@@ -79,9 +76,11 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo
 
 dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
 
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index e21653d86228..10abfde329d0 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -49,17 +49,14 @@
 		opp-shared;
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
diff --git a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
deleted file mode 100644
index c6ca61a8ed40..000000000000
--- a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x
- *
- * Copyright (C) 2015 Renesas Electronics Corp.
- */
-
-/dts-v1/;
-#include "r8a77950.dtsi"
-#include "salvator-x.dtsi"
-
-/ {
-	model = "Renesas Salvator-X board based on r8a77950";
-	compatible = "renesas,salvator-x", "renesas,r8a7795";
-
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x38000000>;
-	};
-
-	memory@500000000 {
-		device_type = "memory";
-		reg = <0x5 0x00000000 0x0 0x40000000>;
-	};
-
-	memory@600000000 {
-		device_type = "memory";
-		reg = <0x6 0x00000000 0x0 0x40000000>;
-	};
-
-	memory@700000000 {
-		device_type = "memory";
-		reg = <0x7 0x00000000 0x0 0x40000000>;
-	};
-};
-
-&du {
-	clocks = <&cpg CPG_MOD 724>,
-		 <&cpg CPG_MOD 723>,
-		 <&cpg CPG_MOD 722>,
-		 <&cpg CPG_MOD 721>,
-		 <&versaclock5 1>,
-		 <&x21_clk>,
-		 <&x22_clk>,
-		 <&versaclock5 2>;
-	clock-names = "du.0", "du.1", "du.2", "du.3",
-		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
deleted file mode 100644
index 85f008ef63de..000000000000
--- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES1.x
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- * Copyright (C) 2017 Cogent Embedded, Inc.
- */
-
-#include "r8a77950-ulcb.dts"
-#include "ulcb-kf.dtsi"
-
-/ {
-	model = "Renesas H3ULCB Kingfisher board based on r8a77950";
-	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
-		     "renesas,r8a7795";
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts
deleted file mode 100644
index 5340579931e3..000000000000
--- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES1.x
- *
- * Copyright (C) 2016 Renesas Electronics Corp.
- * Copyright (C) 2016 Cogent Embedded, Inc.
- */
-
-/dts-v1/;
-#include "r8a77950.dtsi"
-#include "ulcb.dtsi"
-
-/ {
-	model = "Renesas H3ULCB board based on r8a77950";
-	compatible = "renesas,h3ulcb", "renesas,r8a7795";
-
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x38000000>;
-	};
-
-	memory@500000000 {
-		device_type = "memory";
-		reg = <0x5 0x00000000 0x0 0x40000000>;
-	};
-
-	memory@600000000 {
-		device_type = "memory";
-		reg = <0x6 0x00000000 0x0 0x40000000>;
-	};
-
-	memory@700000000 {
-		device_type = "memory";
-		reg = <0x7 0x00000000 0x0 0x40000000>;
-	};
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
deleted file mode 100644
index 57eb88177e92..000000000000
--- a/arch/arm64/boot/dts/renesas/r8a77950.dtsi
+++ /dev/null
@@ -1,330 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car H3 (R8A77950) SoC
- *
- * Copyright (C) 2015 Renesas Electronics Corp.
- */
-
-#include "r8a77951.dtsi"
-
-#undef SOC_HAS_USB2_CH3
-
-&audma0 {
-	iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>,
-	       <&ipmmu_mp1 2>, <&ipmmu_mp1 3>,
-	       <&ipmmu_mp1 4>, <&ipmmu_mp1 5>,
-	       <&ipmmu_mp1 6>, <&ipmmu_mp1 7>,
-	       <&ipmmu_mp1 8>, <&ipmmu_mp1 9>,
-	       <&ipmmu_mp1 10>, <&ipmmu_mp1 11>,
-	       <&ipmmu_mp1 12>, <&ipmmu_mp1 13>,
-	       <&ipmmu_mp1 14>, <&ipmmu_mp1 15>;
-};
-
-&audma1 {
-	iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>,
-	       <&ipmmu_mp1 18>, <&ipmmu_mp1 19>,
-	       <&ipmmu_mp1 20>, <&ipmmu_mp1 21>,
-	       <&ipmmu_mp1 22>, <&ipmmu_mp1 23>,
-	       <&ipmmu_mp1 24>, <&ipmmu_mp1 25>,
-	       <&ipmmu_mp1 26>, <&ipmmu_mp1 27>,
-	       <&ipmmu_mp1 28>, <&ipmmu_mp1 29>,
-	       <&ipmmu_mp1 30>, <&ipmmu_mp1 31>;
-};
-
-&cluster0_opp {
-	/delete-node/ opp-1600000000;
-	/delete-node/ opp-1700000000;
-};
-
-&du {
-	renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>;
-};
-
-&fcpvb1 {
-	iommus = <&ipmmu_vp0 7>;
-};
-
-&fcpf1 {
-	iommus = <&ipmmu_vp0 1>;
-};
-
-&fcpvi1 {
-	iommus = <&ipmmu_vp0 9>;
-};
-
-&fcpvd2 {
-	iommus = <&ipmmu_vi0 10>;
-};
-
-&gpio1 {
-	gpio-ranges = <&pfc 0 32 28>;
-};
-
-&ipmmu_vi0 {
-	renesas,ipmmu-main = <&ipmmu_mm 11>;
-};
-
-&ipmmu_vp0 {
-	renesas,ipmmu-main = <&ipmmu_mm 12>;
-};
-
-&ipmmu_vc0 {
-	renesas,ipmmu-main = <&ipmmu_mm 9>;
-};
-
-&ipmmu_vc1 {
-	renesas,ipmmu-main = <&ipmmu_mm 10>;
-};
-
-&ipmmu_rt {
-	renesas,ipmmu-main = <&ipmmu_mm 7>;
-};
-
-&soc {
-	/delete-node/ dma-controller@e6460000;
-	/delete-node/ dma-controller@e6470000;
-
-	ipmmu_mp1: iommu@ec680000 {
-		compatible = "renesas,ipmmu-r8a7795";
-		reg = <0 0xec680000 0 0x1000>;
-		renesas,ipmmu-main = <&ipmmu_mm 5>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		#iommu-cells = <1>;
-	};
-
-	ipmmu_sy: iommu@e7730000 {
-		compatible = "renesas,ipmmu-r8a7795";
-		reg = <0 0xe7730000 0 0x1000>;
-		renesas,ipmmu-main = <&ipmmu_mm 8>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		#iommu-cells = <1>;
-	};
-
-	/delete-node/ iommu@fd950000;
-	/delete-node/ iommu@fd960000;
-	/delete-node/ iommu@fd970000;
-	/delete-node/ iommu@febe0000;
-	/delete-node/ iommu@fe980000;
-
-	xhci1: usb@ee040000 {
-		compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
-		reg = <0 0xee040000 0 0xc00>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 327>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		resets = <&cpg 327>;
-		status = "disabled";
-	};
-
-	/delete-node/ usb@e659c000;
-	/delete-node/ usb@ee0e0000;
-	/delete-node/ usb@ee0e0100;
-
-	/delete-node/ usb-phy@ee0e0200;
-
-	fdp1@fe948000 {
-		compatible = "renesas,fdp1";
-		reg = <0 0xfe948000 0 0x2400>;
-		interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 117>;
-		power-domains = <&sysc R8A7795_PD_A3VP>;
-		resets = <&cpg 117>;
-		renesas,fcp = <&fcpf2>;
-	};
-
-	fcpf2: fcp@fe952000 {
-		compatible = "renesas,fcpf";
-		reg = <0 0xfe952000 0 0x200>;
-		clocks = <&cpg CPG_MOD 613>;
-		power-domains = <&sysc R8A7795_PD_A3VP>;
-		resets = <&cpg 613>;
-		iommus = <&ipmmu_vp0 2>;
-	};
-
-	fcpvd3: fcp@fea3f000 {
-		compatible = "renesas,fcpv";
-		reg = <0 0xfea3f000 0 0x200>;
-		clocks = <&cpg CPG_MOD 600>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		resets = <&cpg 600>;
-		iommus = <&ipmmu_vi0 11>;
-	};
-
-	fcpvi2: fcp@fe9cf000 {
-		compatible = "renesas,fcpv";
-		reg = <0 0xfe9cf000 0 0x200>;
-		clocks = <&cpg CPG_MOD 609>;
-		power-domains = <&sysc R8A7795_PD_A3VP>;
-		resets = <&cpg 609>;
-		iommus = <&ipmmu_vp0 10>;
-	};
-
-	vspd3: vsp@fea38000 {
-		compatible = "renesas,vsp2";
-		reg = <0 0xfea38000 0 0x5000>;
-		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 620>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		resets = <&cpg 620>;
-
-		renesas,fcp = <&fcpvd3>;
-	};
-
-	vspi2: vsp@fe9c0000 {
-		compatible = "renesas,vsp2";
-		reg = <0 0xfe9c0000 0 0x8000>;
-		interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 629>;
-		power-domains = <&sysc R8A7795_PD_A3VP>;
-		resets = <&cpg 629>;
-
-		renesas,fcp = <&fcpvi2>;
-	};
-
-	csi21: csi2@fea90000 {
-		compatible = "renesas,r8a7795-csi2";
-		reg = <0 0xfea90000 0 0x10000>;
-		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 713>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		resets = <&cpg 713>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-			};
-
-			port@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				reg = <1>;
-
-				csi21vin0: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vin0csi21>;
-				};
-				csi21vin1: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vin1csi21>;
-				};
-				csi21vin2: endpoint@2 {
-					reg = <2>;
-					remote-endpoint = <&vin2csi21>;
-				};
-				csi21vin3: endpoint@3 {
-					reg = <3>;
-					remote-endpoint = <&vin3csi21>;
-				};
-				csi21vin4: endpoint@4 {
-					reg = <4>;
-					remote-endpoint = <&vin4csi21>;
-				};
-				csi21vin5: endpoint@5 {
-					reg = <5>;
-					remote-endpoint = <&vin5csi21>;
-				};
-				csi21vin6: endpoint@6 {
-					reg = <6>;
-					remote-endpoint = <&vin6csi21>;
-				};
-				csi21vin7: endpoint@7 {
-					reg = <7>;
-					remote-endpoint = <&vin7csi21>;
-				};
-			};
-		};
-	};
-};
-
-&vin0 {
-	ports {
-		port@1 {
-			vin0csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin0>;
-			};
-		};
-	};
-};
-
-&vin1 {
-	ports {
-		port@1 {
-			vin1csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin1>;
-			};
-		};
-	};
-};
-
-&vin2 {
-	ports {
-		port@1 {
-			vin2csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin2>;
-			};
-		};
-	};
-};
-
-&vin3 {
-	ports {
-		port@1 {
-			vin3csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin3>;
-			};
-		};
-	};
-};
-
-&vin4 {
-	ports {
-		port@1 {
-			vin4csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin4>;
-			};
-		};
-	};
-};
-
-&vin5 {
-	ports {
-		port@1 {
-			vin5csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin5>;
-			};
-		};
-	};
-};
-
-&vin6 {
-	ports {
-		port@1 {
-			vin6csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin6>;
-			};
-		};
-	};
-};
-
-&vin7 {
-	ports {
-		port@1 {
-			vin7csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin7>;
-			};
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index f770d160e948..10b91e9733bf 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -75,7 +75,6 @@
 			opp-hz = /bits/ 64 <1600000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <300000>;
-			turbo-mode;
 		};
 		opp-1700000000 {
 			opp-hz = /bits/ 64 <1700000000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 09c61696f7fb..3ea8572e917f 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -70,13 +70,11 @@
 			opp-hz = /bits/ 64 <1600000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <300000>;
-			turbo-mode;
 		};
 		opp-1700000000 {
 			opp-hz = /bits/ 64 <1700000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <300000>;
-			turbo-mode;
 		};
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 59a18dfcb8cc..d52cb0b67d80 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -70,13 +70,11 @@
 			opp-hz = /bits/ 64 <1600000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <300000>;
-			turbo-mode;
 		};
 		opp-1700000000 {
 			opp-hz = /bits/ 64 <1700000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <300000>;
-			turbo-mode;
 		};
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 9b4f7ad95ca8..9584115c6b17 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -75,13 +75,11 @@
 			opp-hz = /bits/ 64 <1600000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <300000>;
-			turbo-mode;
 		};
 		opp-1700000000 {
 			opp-hz = /bits/ 64 <1700000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <300000>;
-			turbo-mode;
 		};
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 1d326552e2fa..68d1f1d53b3a 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -14,3 +14,11 @@
 	model = "Renesas Condor board based on r8a77980";
 	compatible = "renesas,condor", "renesas,r8a77980";
 };
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index d168b0e7747d..77d22df25fff 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -122,6 +122,7 @@
 	phy0: ethernet-phy@0 {
 		compatible = "ethernet-phy-id0022.1622",
 			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
 		reg = <0>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index d4718f144e33..4529e9b57c33 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -49,17 +49,14 @@
 		opp-shared;
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
index e06b8eda85e1..dbc8dcab109d 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
@@ -5,6 +5,8 @@
  * Copyright (C) 2021 Glider bv
  */
 
+#include <dt-bindings/media/video-interfaces.h>
+
 &csi40 {
 	status = "okay";
 
@@ -105,6 +107,7 @@
 			port@4 {
 				reg = <4>;
 				max96712_out0: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
 					clock-lanes = <0>;
 					data-lanes = <1 2 3 4>;
 					remote-endpoint = <&csi40_in>;
@@ -125,6 +128,7 @@
 			port@4 {
 				reg = <4>;
 				max96712_out1: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
 					clock-lanes = <0>;
 					data-lanes = <1 2 3 4>;
 					lane-polarities = <0 0 0 0 1>;
@@ -146,6 +150,7 @@
 			port@4 {
 				reg = <4>;
 				max96712_out2: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
 					clock-lanes = <0>;
 					data-lanes = <1 2 3 4>;
 					lane-polarities = <0 0 0 0 1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
index b2e67b82caf6..63db822e5f46 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -37,8 +37,12 @@
 	};
 };
 
+&can_clk {
+	clock-frequency = <40000000>;
+};
+
 &canfd {
-	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>;
+	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 
@@ -80,6 +84,11 @@
 
 	};
 
+	can_clk_pins: can-clk {
+		groups = "can_clk";
+		function = "can_clk";
+	};
+
 	canfd0_pins: canfd0 {
 		groups = "canfd0_data";
 		function = "canfd0";
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 41fbb9998cf8..bf587a14ec19 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -606,7 +606,8 @@
 		};
 
 		canfd: can@e6660000 {
-			compatible = "renesas,r8a779a0-canfd";
+			compatible = "renesas,r8a779a0-canfd",
+				     "renesas,rcar-gen4-canfd";
 			reg = <0 0xe6660000 0 0x8000>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -2097,7 +2098,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xee480000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -2106,7 +2107,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xee4c0000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 19>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -2115,7 +2116,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeed00000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -2124,7 +2125,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeed40000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -2133,7 +2134,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeed80000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_A3IR>;
 			#iommu-cells = <1>;
 		};
@@ -2142,7 +2143,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeedc0000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -2151,7 +2152,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeee80000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -2160,7 +2161,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeeec0000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 15>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -2169,7 +2170,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeee00000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -2178,7 +2179,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeef00000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -2187,7 +2188,7 @@
 			compatible = "renesas,ipmmu-r8a779a0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeef40000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 11>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -2209,8 +2210,7 @@
 			interrupt-controller;
 			reg = <0x0 0xf1000000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x110000>;
-			interrupts = <GIC_PPI 9
-				      (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		fcpvd0: fcp@fea10000 {
@@ -2857,9 +2857,9 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index f20b612b2b9a..1d5426e6293c 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -1059,7 +1059,7 @@
 			compatible = "renesas,ipmmu-r8a779f0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xee480000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -1068,7 +1068,7 @@
 			compatible = "renesas,ipmmu-r8a779f0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xee4c0000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 19>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -1077,7 +1077,7 @@
 			compatible = "renesas,ipmmu-r8a779f0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeed00000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -1086,7 +1086,7 @@
 			compatible = "renesas,ipmmu-r8a779f0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
 			reg = <0 0xeed40000 0 0x20000>;
-			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
 			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -1108,8 +1108,7 @@
 			interrupt-controller;
 			reg = <0x0 0xf1000000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x110000>;
-			interrupts = <GIC_PPI 9
-				      (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		prr: chipid@fff00044 {
@@ -1119,7 +1118,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor1-thermal {
+		sensor_thermal_rtcore: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -1133,7 +1132,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor2-thermal {
+		sensor_thermal_apcore0: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -1147,7 +1146,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor3-thermal {
+		sensor_thermal_apcore4: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
@@ -1164,10 +1163,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	ufs30_clk: ufs30-clk {
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
new file mode 100644
index 000000000000..e6f53377ecd9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the White Hawk board with ARD-AUDIO-DA7212 Board
+ *
+ * You can find and buy "ARD-AUDIO-DA7212" at Digi-Key
+ *
+ *	https://www.digikey.jp/en/products/detail/ARD-AUDIO-DA7212/1564-1021-ND/5456357
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ *
+ *
+ * [Connection]
+ *
+ * White Hawk				ARD-AUDIO-DA7212
+ * +----------------------------+
+ * |CPU board			|
+ * |				|
+ * |CN40 (IO PIN HEADER)	|
+ * |	AUDIO_CLKIN_V	  pin1  |<--\	+---------------+
+ * |(*) GP1_25/SL_SW2_V	  pin2  |<--/	|J2		|
+ * |	AUDIO_CLKOUT_V	  pin5  |<----->| pin7  MCLK	|
+ * |	SSI_SCK_V	  pin9  |<----->| pin1  BCLK	|
+ * |	SSI_WS_V	  pin13 |<----->| pin3  WCLK	|
+ * |	SSI_SD_V	  pin15 |<----->| pin5  DATIN	| (@)
+ * |				|   \-->| pin15 DATOUT	| [CAPTURE]
+ * +----------------------------+	+---------------+
+ * +----------------------------+
+ * |Breakout board		|
+ * |				|	+---------------+
+ * |CN34 (I2C CN)		|	|J1		|
+ * |	I2C0_SCL	   pin3 |<----->| pin20 SCL	|
+ * |	I2C0_SDA	   pin5 |<----->| pin18 SDA	|
+ * |				|	+---------------+
+ * |				|	+-----------------------+
+ * |CN4 (Power)		        |	|J7			|
+ * |	3v3 (v)		   pin9 |<----->| pin4  / pin8  3.3v	|
+ * |	GND (v)	    pin3 / pin4 |<----->| pin12 / pin14 GND	|
+ * +----------------------------+	+-----------------------+
+ * (*)	GP1_25/SL_SW2_V is used as TPU
+ * (@)	Connect to pin5 (DATIN = playback) or pin15 (DATOUT = capture)
+ * (v)	These are just sample pins. You can find many 3v3 / GND pins on
+ *	White Hawk board, not only CN4. You can use other pins for it.
+ *
+ * [How to enable]
+ *
+ * You need these configs
+ *
+ *	CONFIG_PWM
+ *	CONFIG_PWM_RENESAS_TPU
+ *	CONFIG_COMMON_CLK_PWM
+ *	CONFIG_SND_SOC_DA7213
+ *
+ * [How to use]
+ *
+ * 44.1kHz groups sound is available by default.
+ * You need to update audio_clkin settings to switch to 48kHz groups sound.
+ * see
+ *	[(C) clock]
+ *
+ * You can use capture if you change the settings
+ * see
+ *	[CAPTURE]
+ *
+ * You need to setup Headphone
+ *
+ *	> amixer set "Headphone" 40%
+ *	> amixer set "Headphone" on
+ *	> amixer set "Mixout Left DAC Left" on
+ *	> amixer set "Mixout Right DAC Right" on
+ */
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+
+&{/} {
+	sound_card: sound {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+
+		dais = <&rsnd_port>;	/* DA7212 Audio Codec */
+	};
+
+	tpu_clk: tpu-clk {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+
+		/* 44.1kHz groups [(C) clock] */
+		clock-frequency = <11289600>;
+		pwms = <&tpu 0 88 0>;	/* 1000000000 / 88 =~ 11289600 */
+
+		/* 48  kHz groups [(C) clock] */
+//		clock-frequency = <12288000>;
+//		pwms = <&tpu 0 81 0>;	/* 1000000000 / 81 =~ 12288000 */
+	};
+
+};
+
+&pfc {
+	sound_pins: sound {
+		groups = "ssi_ctrl", "ssi_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clkin", "audio_clkout";
+		function = "audio_clk";
+	};
+
+	tpu0_pins: tpu0 {
+		groups = "tpu_to0_a";
+		function = "tpu";
+	};
+};
+
+&tpu {
+	pinctrl-0 = <&tpu0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	codec@1a {
+		compatible = "dlg,da7212";
+
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+
+		clocks = <&rcar_sound>;
+		clock-names = "mclk";
+
+		dlg,micbias1-lvl = <2500>;
+		dlg,micbias2-lvl = <2500>;
+		dlg,dmic-data-sel = "lrise_rfall";
+		dlg,dmic-samplephase = "between_clkedge";
+		dlg,dmic-clkrate = <3000000>;
+
+		VDDA-supply   = <&reg_1p8v>;
+		VDDMIC-supply = <&reg_3p3v>;
+		VDDIO-supply  = <&reg_3p3v>;
+
+		port {
+			da7212_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_clk_pins>, <&sound_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout */
+	#clock-cells = <0>;
+	clock-frequency = <5644800>; /* 44.1kHz groups [(C) clock] */
+//	clock-frequency = <6144000>; /* 48  kHz groups [(C) clock] */
+
+	status = "okay";
+
+	/* Update <clkin> to <tpu_clk> */
+	clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&tpu_clk>;
+
+	ports {
+		rsnd_port: port {
+			rsnd_endpoint: endpoint {
+				remote-endpoint = <&da7212_endpoint>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint>;
+				frame-master = <&rsnd_endpoint>;
+
+				/* Mutually exclusive with 'capture' */
+				playback = <&ssi0>;
+				/* [CAPTURE] */
+				/* capture = <&ssi0>; */
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi
index ae7522b60e5d..f8537f7ea4de 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi
@@ -5,7 +5,63 @@
  * Copyright (C) 2022 Glider bv
  */
 
+#include <dt-bindings/media/video-interfaces.h>
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3>;
+				remote-endpoint = <&max96712_out0>;
+			};
+		};
+	};
+};
+
+&csi41 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi41_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3>;
+				remote-endpoint = <&max96712_out1>;
+			};
+		};
+	};
+};
+
 &i2c0 {
+	pca9654_a: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9654_b: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	eeprom@52 {
 		compatible = "rohm,br24g01", "atmel,24c01";
 		label = "csi-dsi-sub-board-id";
@@ -13,3 +69,119 @@
 		pagesize = <8>;
 	};
 };
+
+&i2c1 {
+	gmsl0: gmsl-deserializer@49 {
+		compatible = "maxim,max96712";
+		reg = <0x49>;
+		enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out0: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4b {
+		compatible = "maxim,max96712";
+		reg = <0x4b>;
+		enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out1: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3>;
+					remote-endpoint = <&csi41_in>;
+				};
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&isp1 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
+
+&vin08 {
+	status = "okay";
+};
+
+&vin09 {
+	status = "okay";
+};
+
+&vin10 {
+	status = "okay";
+};
+
+&vin11 {
+	status = "okay";
+};
+
+&vin12 {
+	status = "okay";
+};
+
+&vin13 {
+	status = "okay";
+};
+
+&vin14 {
+	status = "okay";
+};
+
+&vin15 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
index 04a2b6b83e74..eff1ef6e2cc8 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
@@ -13,6 +13,33 @@
 / {
 	model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0";
 	compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0";
+
+	can_transceiver0: can-phy0 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		max-bitrate = <5000000>;
+	};
+};
+
+&can_clk {
+	clock-frequency = <40000000>;
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+		phys = <&can_transceiver0>;
+	};
+
+	channel1 {
+		status = "okay";
+	};
 };
 
 &i2c0 {
@@ -23,3 +50,20 @@
 		pagesize = <8>;
 	};
 };
+
+&pfc {
+	can_clk_pins: can-clk {
+		groups = "can_clk";
+		function = "can_clk";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data";
+		function = "canfd0";
+	};
+
+	canfd1_pins: canfd1 {
+		groups = "canfd1_data";
+		function = "canfd1";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 7a87a5dc1b6a..d3d25e077c5d 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -14,6 +14,20 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	/* External Audio clock - to be overridden by boards that provide it */
+	audio_clkin: audio_clkin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	cluster0_opp: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
@@ -431,6 +445,18 @@
 			#power-domain-cells = <1>;
 		};
 
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a779g0-thermal";
+			reg = <0 0xe6198000 0 0x200>,
+			      <0 0xe61a0000 0 0x200>,
+			      <0 0xe61a8000 0 0x200>,
+			      <0 0xe61b0000 0 0x200>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		intc_ex: interrupt-controller@e61c0000 {
 			compatible = "renesas,intc-ex-r8a779g0", "renesas,irqc";
 			#interrupt-cells = <2>;
@@ -682,6 +708,56 @@
 			status = "disabled";
 		};
 
+		canfd: can@e6660000 {
+			compatible = "renesas,r8a779g0-canfd",
+				     "renesas,rcar-gen4-canfd";
+			reg = <0 0xe6660000 0 0x8500>;
+			interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 328>,
+				 <&cpg CPG_CORE R8A779G0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A779G0_CLK_CANFD>;
+			assigned-clock-rates = <80000000>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+
+			channel2 {
+				status = "disabled";
+			};
+
+			channel3 {
+				status = "disabled";
+			};
+
+			channel4 {
+				status = "disabled";
+			};
+
+			channel5 {
+				status = "disabled";
+			};
+
+			channel6 {
+				status = "disabled";
+			};
+
+			channel7 {
+				status = "disabled";
+			};
+		};
+
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
@@ -1098,6 +1174,454 @@
 			status = "disabled";
 		};
 
+		vin00: video@e6ef0000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 730>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 730>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin00isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin00>;
+					};
+				};
+			};
+		};
+
+		vin01: video@e6ef1000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 731>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 731>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin01isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin01>;
+					};
+				};
+			};
+		};
+
+		vin02: video@e6ef2000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 800>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 800>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin02isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin02>;
+					};
+				};
+			};
+		};
+
+		vin03: video@e6ef3000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 801>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 801>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin03isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin03>;
+					};
+				};
+			};
+		};
+
+		vin04: video@e6ef4000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin04isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin04>;
+					};
+				};
+			};
+		};
+
+		vin05: video@e6ef5000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 803>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 803>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin05isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin05>;
+					};
+				};
+			};
+		};
+
+		vin06: video@e6ef6000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin06isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin06>;
+					};
+				};
+			};
+		};
+
+		vin07: video@e6ef7000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin07isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin07>;
+					};
+				};
+			};
+		};
+
+		vin08: video@e6ef8000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef8000 0 0x1000>;
+			interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <8>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin08isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin08>;
+					};
+				};
+			};
+		};
+
+		vin09: video@e6ef9000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef9000 0 0x1000>;
+			interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <9>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin09isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin09>;
+					};
+				};
+			};
+		};
+
+		vin10: video@e6efa000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efa000 0 0x1000>;
+			interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <10>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin10isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin10>;
+					};
+				};
+			};
+		};
+
+		vin11: video@e6efb000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efb000 0 0x1000>;
+			interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <11>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin11isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin11>;
+					};
+				};
+			};
+		};
+
+		vin12: video@e6efc000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efc000 0 0x1000>;
+			interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <12>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin12isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin12>;
+					};
+				};
+			};
+		};
+
+		vin13: video@e6efd000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efd000 0 0x1000>;
+			interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <13>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin13isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin13>;
+					};
+				};
+			};
+		};
+
+		vin14: video@e6efe000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efe000 0 0x1000>;
+			interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			renesas,id = <14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin14isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin14>;
+					};
+				};
+			};
+		};
+
+		vin15: video@e6eff000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6eff000 0 0x1000>;
+			interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			renesas,id = <15>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin15isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin15>;
+					};
+				};
+			};
+		};
+
 		dmac0: dma-controller@e7350000 {
 			compatible = "renesas,dmac-r8a779g0",
 				     "renesas,rcar-gen4-dmac";
@@ -1131,6 +1655,14 @@
 			resets = <&cpg 709>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
 		};
 
 		dmac1: dma-controller@e7351000 {
@@ -1166,6 +1698,192 @@
 			resets = <&cpg 710>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>,
+				 <&ipmmu_ds0 18>, <&ipmmu_ds0 19>,
+				 <&ipmmu_ds0 20>, <&ipmmu_ds0 21>,
+				 <&ipmmu_ds0 22>, <&ipmmu_ds0 23>,
+				 <&ipmmu_ds0 24>, <&ipmmu_ds0 25>,
+				 <&ipmmu_ds0 26>, <&ipmmu_ds0 27>,
+				 <&ipmmu_ds0 28>, <&ipmmu_ds0 29>,
+				 <&ipmmu_ds0 30>, <&ipmmu_ds0 31>;
+		};
+
+		rcar_sound: sound@ec5a0000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required
+			 *
+			 * clkout		: #clock-cells = <0>;	<&rcar_sound>;
+			 * audio_clkout0/1/2/3	: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a779g0", "renesas,rcar_sound-gen4";
+			reg = <0 0xec5a0000 0 0x020>,
+			      <0 0xec540000 0 0x1000>,
+			      <0 0xec541000 0 0x050>,
+			      <0 0xec400000 0 0x40000>;
+			reg-names = "adg", "ssiu", "ssi", "sdmc";
+
+			clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&audio_clkin>;
+			clock-names = "ssiu.0", "ssi.0", "clkin";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 2926>, <&cpg 2927>;
+			reset-names = "ssiu.0", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&dmac0 0x6e>, <&dmac0 0x6f>;
+					dma-names = "tx", "rx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&dmac0 0x6c>, <&dmac0 0x6d>;
+					dma-names = "tx", "rx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&dmac0 0x6a>, <&dmac0 0x6b>;
+					dma-names = "tx", "rx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&dmac0 0x68>, <&dmac0 0x69>;
+					dma-names = "tx", "rx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&dmac0 0x66>, <&dmac0 0x67>;
+					dma-names = "tx", "rx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&dmac0 0x64>, <&dmac0 0x65>;
+					dma-names = "tx", "rx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&dmac0 0x62>, <&dmac0 0x63>;
+					dma-names = "tx", "rx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&dmac0 0x60>, <&dmac0 0x61>;
+					dma-names = "tx", "rx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		ipmmu_rt0: iommu@ee480000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee480000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt1: iommu@ee4c0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee4c0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds0: iommu@eed00000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@eed40000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@eed80000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc: iommu@eedc0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeedc0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_3dg: iommu@eee00000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@eee80000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@eeec0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeeec0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: iommu@eef00000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: iommu@eef40000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@eefc0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeefc0000 0 0x20000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
 		};
 
 		mmc0: mmc@ee140000 {
@@ -1179,6 +1897,7 @@
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 706>;
 			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
 			status = "disabled";
 		};
 
@@ -1205,8 +1924,59 @@
 			interrupt-controller;
 			reg = <0x0 0xf1000000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x110000>;
-			interrupts = <GIC_PPI 9
-				      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		csi40: csi2@fe500000 {
+			compatible = "renesas,r8a779g0-csi2";
+			reg = <0 0xfe500000 0 0x40000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi40isp0: endpoint {
+						remote-endpoint = <&isp0csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@fe540000 {
+			compatible = "renesas,r8a779g0-csi2";
+			reg = <0 0xfe540000 0 0x40000>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 400>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 400>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi41isp1: endpoint {
+						remote-endpoint = <&isp1csi41>;
+					};
+				};
+			};
 		};
 
 		fcpvd0: fcp@fea10000 {
@@ -1281,6 +2051,172 @@
 			};
 		};
 
+		isp0: isp@fed00000 {
+			compatible = "renesas,r8a779g0-isp";
+			reg = <0 0xfed00000 0 0x10000>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cpg CPG_MOD 612>;
+			power-domains = <&sysc R8A779G0_PD_A3ISP0>;
+			resets = <&cpg 612>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp0csi40: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi40isp0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp0vin00: endpoint {
+						remote-endpoint = <&vin00isp0>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp0vin01: endpoint {
+						remote-endpoint = <&vin01isp0>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp0vin02: endpoint {
+						remote-endpoint = <&vin02isp0>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp0vin03: endpoint {
+						remote-endpoint = <&vin03isp0>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp0vin04: endpoint {
+						remote-endpoint = <&vin04isp0>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp0vin05: endpoint {
+						remote-endpoint = <&vin05isp0>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp0vin06: endpoint {
+						remote-endpoint = <&vin06isp0>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp0vin07: endpoint {
+						remote-endpoint = <&vin07isp0>;
+					};
+				};
+			};
+		};
+
+		isp1: isp@fed20000 {
+			compatible = "renesas,r8a779g0-isp";
+			reg = <0 0xfed20000 0 0x10000>;
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cpg CPG_MOD 613>;
+			power-domains = <&sysc R8A779G0_PD_A3ISP1>;
+			resets = <&cpg 613>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp1csi41: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&csi41isp1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp1vin08: endpoint {
+						remote-endpoint = <&vin08isp1>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp1vin09: endpoint {
+						remote-endpoint = <&vin09isp1>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp1vin10: endpoint {
+						remote-endpoint = <&vin10isp1>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp1vin11: endpoint {
+						remote-endpoint = <&vin11isp1>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp1vin12: endpoint {
+						remote-endpoint = <&vin12isp1>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp1vin13: endpoint {
+						remote-endpoint = <&vin13isp1>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp1vin14: endpoint {
+						remote-endpoint = <&vin14isp1>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp1vin15: endpoint {
+						remote-endpoint = <&vin15isp1>;
+					};
+				};
+			};
+		};
+
 		dsi0: dsi-encoder@fed80000 {
 			compatible = "renesas,r8a779g0-dsi-csi2-tx";
 			reg = <0 0xfed80000 0 0x10000>;
@@ -1345,11 +2281,69 @@
 		};
 	};
 
+	thermal-zones {
+		sensor_thermal_cr52: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_cnn: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_ca76: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+
+			trips {
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_ddr1: sensor4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 3>;
+
+			trips {
+				sensor4_crit: sensor4-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi
index b6e855f52adf..1064a87a0c77 100644
--- a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi
@@ -12,6 +12,9 @@
 };
 
 &cluster0_opp {
+	opp-1700000000 {
+		/delete-property/ turbo-mode;
+	};
 	opp-2000000000 {
 		opp-hz = /bits/ 64 <2000000000>;
 		opp-microvolt = <960000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi
index 6cff38a6d20b..7fdbdd97ed4b 100644
--- a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi
@@ -12,6 +12,9 @@
 };
 
 &cluster0_opp {
+	opp-1800000000 {
+		/delete-property/ turbo-mode;
+	};
 	opp-2000000000 {
 		opp-hz = /bits/ 64 <2000000000>;
 		opp-microvolt = <960000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
index 8c9c0557fe77..df51e0ff5986 100644
--- a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
@@ -12,6 +12,9 @@
 };
 
 &cluster0_opp {
+	opp-1800000000 {
+		/delete-property/ turbo-mode;
+	};
 	opp-2000000000 {
 		opp-hz = /bits/ 64 <2000000000>;
 		opp-microvolt = <960000>;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso b/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso
new file mode 100644
index 000000000000..4edd103c7711
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/{G2UL, Five} SMARC EVK PMOD parts
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ *
+ *
+ * [Connection]
+ *
+ * SMARC EVK
+ * +----------------------------+
+ * |CN7 (PMOD1 PIN HEADER)      |
+ * |	SCI0_TXD	  pin7  |
+ * |	SCI0_RXD	  pin8  |
+ * |	Gnd		  pin11 |
+ * |	Vcc		  pin12 |
+ * +----------------------------+
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	can0-stb-hog {
+		status = "disabled";
+	};
+
+	can1-stb-hog {
+		status = "disabled";
+	};
+
+	sci0_pins: sci0-pins {
+		pinmux = <RZG2L_PORT_PINMUX(2, 2, 5)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(2, 3, 5)>; /* RxD */
+	};
+};
+
+&sci0 {
+	pinctrl-0 = <&sci0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
index c8a83e42c4f3..27c35a657b15 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
@@ -80,9 +80,8 @@
 			reg = <0 0x10049c00 0 0x400>;
 			interrupts = <SOC_PERIPHERAL_IRQ(326) IRQ_TYPE_LEVEL_HIGH>,
 				     <SOC_PERIPHERAL_IRQ(327) IRQ_TYPE_EDGE_RISING>,
-				     <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>,
-				     <SOC_PERIPHERAL_IRQ(329) IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -101,9 +100,8 @@
 			reg = <0 0x1004a000 0 0x400>;
 			interrupts = <SOC_PERIPHERAL_IRQ(330) IRQ_TYPE_LEVEL_HIGH>,
 				     <SOC_PERIPHERAL_IRQ(331) IRQ_TYPE_EDGE_RISING>,
-				     <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>,
-				     <SOC_PERIPHERAL_IRQ(333) IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -121,10 +119,8 @@
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a400 0 0x400>;
 			interrupts = <SOC_PERIPHERAL_IRQ(334) IRQ_TYPE_LEVEL_HIGH>,
-				     <SOC_PERIPHERAL_IRQ(335) IRQ_TYPE_EDGE_RISING>,
-				     <SOC_PERIPHERAL_IRQ(336) IRQ_TYPE_EDGE_RISING>,
 				     <SOC_PERIPHERAL_IRQ(337) IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+			interrupt-names = "int_req", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -143,9 +139,8 @@
 			reg = <0 0x1004a800 0 0x400>;
 			interrupts = <SOC_PERIPHERAL_IRQ(338) IRQ_TYPE_LEVEL_HIGH>,
 				     <SOC_PERIPHERAL_IRQ(339) IRQ_TYPE_EDGE_RISING>,
-				     <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>,
-				     <SOC_PERIPHERAL_IRQ(341) IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -569,9 +564,11 @@
 					  "ch12", "ch13", "ch14", "ch15";
 			clocks = <&cpg CPG_MOD R9A07G043_DMAC_ACLK>,
 				 <&cpg CPG_MOD R9A07G043_DMAC_PCLK>;
+			clock-names = "main", "register";
 			power-domains = <&cpg>;
 			resets = <&cpg R9A07G043_DMAC_ARESETN>,
 				 <&cpg R9A07G043_DMAC_RST_ASYNC>;
+			reset-names = "arst", "rst_async";
 			#dma-cells = <1>;
 			dma-channels = <16>;
 		};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
index 9d854706ada5..2ab231572d95 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -35,6 +35,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
@@ -42,10 +47,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 487536696d90..1315be5167b9 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -157,6 +157,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
@@ -175,9 +180,8 @@
 			reg = <0 0x10049c00 0 0x400>;
 			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -196,9 +200,8 @@
 			reg = <0 0x1004a000 0 0x400>;
 			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -216,10 +219,8 @@
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a400 0 0x400>;
 			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+			interrupt-names = "int_req", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -238,9 +239,8 @@
 			reg = <0 0x1004a800 0 0x400>;
 			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -618,6 +618,85 @@
 			status = "disabled";
 		};
 
+		cru: video@10830000 {
+			compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+			reg = <0 0x10830000 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+			clock-names = "video", "apb", "axi";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+			resets = <&cpg R9A07G044_CRU_PRESETN>,
+				 <&cpg R9A07G044_CRU_ARESETN>;
+			reset-names = "presetn", "aresetn";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+					cruparallel: endpoint@0 {
+						reg = <0>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+					crucsi2: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi2cru>;
+					};
+				};
+			};
+		};
+
+		csi2: csi2@10830400 {
+			compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
+			reg = <0 0x10830400 0 0xfc00>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
+			clock-names = "system", "video", "apb";
+			resets = <&cpg R9A07G044_CRU_PRESETN>,
+				 <&cpg R9A07G044_CRU_CMN_RSTB>;
+			reset-names = "presetn", "cmn-rstb";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					csi2cru: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&crucsi2>;
+					};
+				};
+			};
+		};
+
 		cpg: clock-controller@11010000 {
 			compatible = "renesas,r9a07g044-cpg";
 			reg = <0 0x11010000 0 0x10000>;
@@ -740,9 +819,11 @@
 					  "ch12", "ch13", "ch14", "ch15";
 			clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
 				 <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+			clock-names = "main", "register";
 			power-domains = <&cpg>;
 			resets = <&cpg R9A07G044_DMAC_ARESETN>,
 				 <&cpg R9A07G044_DMAC_RST_ASYNC>;
+			reset-names = "arst", "rst_async";
 			#dma-cells = <1>;
 			dma-channels = <16>;
 		};
@@ -1061,9 +1142,9 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
index 1d57df706939..56a979e82c4f 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
@@ -15,13 +15,6 @@
 		/delete-node/ cpu-map;
 		/delete-node/ cpu@100;
 	};
-
-	timer {
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-	};
 };
 
 &soc {
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
index 9d89d4590358..9cf27ca9f1d2 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
@@ -15,11 +15,4 @@
 		/delete-node/ cpu-map;
 		/delete-node/ cpu@100;
 	};
-
-	timer {
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso
new file mode 100644
index 000000000000..d834bff9bda2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/G2L SMARC EVK with OV5645 camera
+ * connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#define OV5645_PARENT_I2C i2c0
+#include "rz-smarc-cru-csi-ov5645.dtsi"
+
+&ov5645 {
+	enable-gpios = <&pinctrl RZG2L_GPIO(2, 0) GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&pinctrl RZG2L_GPIO(40, 2) GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index 304ade54425b..cc11e5855d62 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -157,6 +157,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
@@ -175,9 +180,8 @@
 			reg = <0 0x10049c00 0 0x400>;
 			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G054_SSI0_PCLK2>,
 				 <&cpg CPG_MOD R9A07G054_SSI0_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -196,9 +200,8 @@
 			reg = <0 0x1004a000 0 0x400>;
 			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G054_SSI1_PCLK2>,
 				 <&cpg CPG_MOD R9A07G054_SSI1_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -216,10 +219,8 @@
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a400 0 0x400>;
 			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+			interrupt-names = "int_req", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G054_SSI2_PCLK2>,
 				 <&cpg CPG_MOD R9A07G054_SSI2_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -238,9 +239,8 @@
 			reg = <0 0x1004a800 0 0x400>;
 			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G054_SSI3_PCLK2>,
 				 <&cpg CPG_MOD R9A07G054_SSI3_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -746,9 +746,11 @@
 					  "ch12", "ch13", "ch14", "ch15";
 			clocks = <&cpg CPG_MOD R9A07G054_DMAC_ACLK>,
 				 <&cpg CPG_MOD R9A07G054_DMAC_PCLK>;
+			clock-names = "main", "register";
 			power-domains = <&cpg>;
 			resets = <&cpg R9A07G054_DMAC_ARESETN>,
 				 <&cpg R9A07G054_DMAC_RST_ASYNC>;
+			reset-names = "arst", "rst_async";
 			#dma-cells = <1>;
 			dma-channels = <16>;
 		};
@@ -1067,9 +1069,9 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
index c448cc6634c1..d85a6ac0f024 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
@@ -15,11 +15,4 @@
 		/delete-node/ cpu-map;
 		/delete-node/ cpu@100;
 	};
-
-	timer {
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
index d6737395df67..39fe3f94991e 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "r9a09g011.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
 
 / {
@@ -22,6 +23,31 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
 	memory@58000000 {
 		device_type = "memory";
 		/*
@@ -35,6 +61,36 @@
 		device_type = "memory";
 		reg = <0x1 0x80000000 0x0 0x80000000>;
 	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&pwc 0 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 0>, <1800000 1>;
+	};
 };
 
 &avb {
@@ -50,6 +106,23 @@
 	};
 };
 
+&emmc {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	max-frequency = <200000000>;
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <48000000>;
 };
@@ -59,6 +132,30 @@
 	pinctrl-names = "default";
 	clock-frequency = <400000>;
 	status = "okay";
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
 };
 
 &i2c2 {
@@ -69,6 +166,26 @@
 };
 
 &pinctrl {
+	emmc_pins: emmc {
+		data {
+			pinmux = <RZV2M_PORT_PINMUX(0, 0, 2)>, /* MMDAT0 */
+				 <RZV2M_PORT_PINMUX(0, 1, 2)>, /* MMDAT1 */
+				 <RZV2M_PORT_PINMUX(0, 2, 2)>, /* MMDAT2 */
+				 <RZV2M_PORT_PINMUX(0, 3, 2)>, /* MMDAT3 */
+				 <RZV2M_PORT_PINMUX(0, 4, 2)>, /* MMDAT4 */
+				 <RZV2M_PORT_PINMUX(0, 5, 2)>, /* MMDAT5 */
+				 <RZV2M_PORT_PINMUX(0, 6, 2)>, /* MMDAT6 */
+				 <RZV2M_PORT_PINMUX(0, 7, 2)>; /* MMDAT7 */
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(0, 10, 2)>, /* MMCMD */
+				 <RZV2M_PORT_PINMUX(0, 11, 2)>; /* MMCLK */
+			power-source = <1800>;
+		};
+	};
+
 	i2c0_pins: i2c0 {
 		pinmux = <RZV2M_PORT_PINMUX(5, 0, 2)>, /* SDA */
 			 <RZV2M_PORT_PINMUX(5, 1, 2)>; /* SCL */
@@ -78,6 +195,55 @@
 		pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
 			 <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
 	};
+
+	sdhi0_pins: sd0 {
+		data {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <3300>;
+		};
+
+		ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <3300>;
+		};
+
+		cd {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <3300>;
+		};
+	};
+
+	sdhi0_pins_uhs: sd0-uhs {
+		data {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <1800>;
+		};
+
+		cd {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <1800>;
+		};
+	};
+
+	uart0_pins: uart0 {
+		pinmux = <RZV2M_PORT_PINMUX(3, 0, 2)>, /* UATX0 */
+			 <RZV2M_PORT_PINMUX(3, 1, 2)>, /* UARX0 */
+			 <RZV2M_PORT_PINMUX(3, 2, 2)>, /* UACTS0N */
+			 <RZV2M_PORT_PINMUX(3, 3, 2)>; /* UARTS0N */
+	};
 };
 
 &pwc {
@@ -85,10 +251,60 @@
 	status = "okay";
 };
 
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
 &uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
 	status = "okay";
 };
 
+&usb3drd {
+	status = "okay";
+};
+
+&usb3host {
+	status = "okay";
+};
+
+&usb3peri {
+	companion = <&usb3host>;
+	status = "okay";
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
 &wdt0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
index b5d6f7701ef1..46d67b200a66 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -117,6 +117,51 @@
 			status = "disabled";
 		};
 
+		usb3drd: usb3drd@85070400 {
+			compatible = "renesas,r9a09g011-usb3drd",
+				     "renesas,rzv2m-usb3drd";
+			reg = <0x0 0x85070400 0x0 0x100>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "drd", "bc", "gpi";
+			clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>,
+				 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+			clock-names = "axi", "reg";
+			resets = <&cpg R9A09G011_USB_DRD_RESET>;
+			power-domains = <&cpg>;
+			ranges;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			usb3host: usb@85060000 {
+				compatible = "renesas,r9a09g011-xhci",
+					     "renesas,rzv2m-xhci";
+				reg = <0 0x85060000 0 0x2000>;
+				interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>,
+					 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+				clock-names = "axi", "reg";
+				resets = <&cpg R9A09G011_USB_ARESETN_H>;
+				power-domains = <&cpg>;
+				status = "disabled";
+			};
+
+			usb3peri: usb3peri@85070000 {
+				compatible = "renesas,r9a09g011-usb3-peri",
+					     "renesas,rzv2m-usb3-peri";
+				reg = <0x0 0x85070000 0x0 0x400>;
+				interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>,
+					 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+				clock-names = "axi", "reg";
+				resets = <&cpg R9A09G011_USB_ARESETN_P>;
+				power-domains = <&cpg>;
+				status = "disabled";
+			};
+		};
+
 		avb: ethernet@a3300000 {
 			compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m";
 			reg = <0 0xa3300000 0 0x800>;
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi
new file mode 100644
index 000000000000..c5bb63c63b47
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common Device Tree for the RZ/G2L SMARC EVK (and alike EVKs) with
+ * OV5645 camera connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+&{/} {
+	ov5645_vdddo_1v8: 1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdddo";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	ov5645_vdda_2v8: 2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdda";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	ov5645_vddd_1v5: 1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	ov5645_fixed_clk: osc25250-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&cru {
+	status = "okay";
+};
+
+&csi2 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi2_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5645_ep>;
+			};
+		};
+	};
+};
+
+&OV5645_PARENT_I2C {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ov5645: camera@3c {
+		compatible = "ovti,ov5645";
+		reg = <0x3c>;
+		clocks = <&ov5645_fixed_clk>;
+		clock-frequency = <24000000>;
+		vdddo-supply = <&ov5645_vdddo_1v8>;
+		vdda-supply = <&ov5645_vdda_2v8>;
+		vddd-supply = <&ov5645_vddd_1v5>;
+
+		port {
+			ov5645_ep: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi2_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index d693e879b330..0be2716659e9 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -267,6 +267,12 @@
 			};
 		};
 	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
 };
 
 &ohci1 {
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 99a44c400d6a..2d585bbb8f3a 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -14,8 +14,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
@@ -84,10 +86,13 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 4f6959eb564d..8332c8aaf49b 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -474,7 +474,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				lvds_in: port@0 {
 					reg = <0>;
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -489,6 +489,10 @@
 						remote-endpoint = <&vopl_out_lvds>;
 					};
 				};
+
+				lvds_out: port@1 {
+					reg = <1>;
+				};
 			};
 		};
 	};
@@ -1134,7 +1138,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			dsi_in: port@0 {
 				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1149,6 +1153,10 @@
 					remote-endpoint = <&vopl_out_dsi>;
 				};
 			};
+
+			dsi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
index 61b31688b469..ce318e05f0a6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
@@ -24,6 +24,8 @@
 
 &internal_display {
 	compatible = "elida,kd35t133";
+	iovcc-supply = <&vcc_lcd>;
+	vdd-supply = <&vcc_lcd>;
 };
 
 &pwm0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
index 04eba432fb0e..80fc53c807a4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
@@ -235,10 +235,8 @@
 	internal_display: panel@0 {
 		reg = <0>;
 		backlight = <&backlight>;
-		iovcc-supply = <&vcc_lcd>;
 		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 		rotation = <270>;
-		vdd-supply = <&vcc_lcd>;
 
 		port {
 			mipi_in_panel: endpoint {
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
index 139c898e590e..d94ac81eb4e6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
@@ -83,6 +83,8 @@
 
 &internal_display {
 	compatible = "elida,kd35t133";
+	iovcc-supply = <&vcc_lcd>;
+	vdd-supply = <&vcc_lcd>;
 };
 
 &rk817 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index 4702183b673c..aa6f5b12206b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -59,6 +59,8 @@
 
 &internal_display {
 	compatible = "elida,kd35t133";
+	iovcc-supply = <&vcc_lcd>;
+	vdd-supply = <&vcc_lcd>;
 };
 
 &rk817_charger {
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
index 842efbaf1a6a..35bbaf559ca3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
@@ -142,7 +142,10 @@
 };
 
 &internal_display {
-	status = "disabled";
+	compatible = "elida,kd50t048a", "sitronix,st7701";
+	reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	IOVCC-supply = <&vcc_lcd>;
+	VCC-supply = <&vcc_lcd>;
 };
 
 &rk817_charger {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
new file mode 100644
index 000000000000..a07a26b944a0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3328-nanopi-r2s.dts"
+
+/ {
+	model = "FriendlyElec NanoPi R2C";
+	compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328";
+};
+
+&gmac2io {
+	phy-handle = <&yt8521s>;
+	tx_delay = <0x22>;
+	rx_delay = <0x12>;
+
+	mdio {
+		/delete-node/ ethernet-phy@1;
+
+		yt8521s: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+
+			motorcomm,clk-out-frequency-hz = <125000000>;
+			motorcomm,keep-pll-enabled;
+			motorcomm,auto-sleep-disabled;
+
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
new file mode 100644
index 000000000000..5d7d567283e5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Xunlong Software. Co., Ltd.
+ * (http://www.orangepi.org)
+ *
+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3328-orangepi-r1-plus.dts"
+
+/ {
+	model = "Xunlong Orange Pi R1 Plus LTS";
+	compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
+};
+
+&gmac2io {
+	phy-handle = <&yt8531c>;
+	tx_delay = <0x19>;
+	rx_delay = <0x05>;
+
+	mdio {
+		/delete-node/ ethernet-phy@1;
+
+		yt8531c: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+
+			motorcomm,clk-out-frequency-hz = <125000000>;
+			motorcomm,keep-pll-enabled;
+			motorcomm,auto-sleep-disabled;
+
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <15000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index 083452c67711..e47d1398aeca 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -61,7 +61,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&bl_en>;
 		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
-		pwm-delay-us = <10000>;
 	};
 
 	emmc_pwrseq: emmc-pwrseq {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index ee6095baba4d..5c1929d41cc0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -198,7 +198,6 @@
 		power-supply = <&pp3300_disp>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bl_en>;
-		pwm-delay-us = <10000>;
 	};
 
 	gpio_keys: gpio-keys {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index a47d9f758611..c5e7de60c121 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -167,7 +167,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&bl_en>;
 		pwms = <&pwm1 0 1000000 0>;
-		pwm-delay-us = <10000>;
 	};
 
 	dmic: dmic {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 194e48c755f6..054c6a4d1a45 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -50,19 +50,9 @@
 		pinctrl-0 = <&panel_en_pin>;
 		power-supply = <&vcc3v3_panel>;
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				panel_in_edp: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&edp_out_panel>;
-				};
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
 			};
 		};
 	};
@@ -675,7 +665,7 @@
 	i2c-scl-rising-time-ns = <168>;
 	status = "okay";
 
-	es8316: es8316@11 {
+	es8316: audio-codec@11 {
 		compatible = "everest,es8316";
 		reg = <0x11>;
 		clocks = <&cru SCLK_I2S_8CH_OUT>;
@@ -943,7 +933,7 @@
 	disable-wp;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	sd-uhs-sdr104;
+	sd-uhs-sdr50;
 	vmmc-supply = <&vcc3v0_sd>;
 	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index a0795a2b1cb1..61f3fec5a8b1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -10,6 +10,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
@@ -29,6 +30,31 @@
 		stdout-path = "serial2:115200n8";
 	};
 
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1600000>;
+		poll-interval = <100>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <600000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 50000 0>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -102,6 +128,30 @@
 		/* WL_REG_ON on module */
 		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 	};
+
+	/* MIPI DSI panel 1.8v supply */
+	vcc1v8_lcd: vcc1v8-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+		gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+	};
+
+	/* MIPI DSI panel 2.8v supply */
+	vcc2v8_lcd: vcc2v8-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc2v8_lcd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc3v3_sys>;
+		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+	};
 };
 
 &cpu_alert0 {
@@ -139,6 +189,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	i2c-scl-rising-time-ns = <168>;
@@ -333,6 +388,25 @@
 	};
 };
 
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "goodix,gt1158";
+		reg = <0x14>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
 &cluster0_opp {
 	opp04 {
 		status = "disabled";
@@ -362,6 +436,39 @@
 	status = "okay";
 };
 
+&mipi_dsi {
+	status = "okay";
+	clock-master;
+
+	ports {
+		mipi_out: port@1 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "hannstar,hsd060bhw4";
+		reg = <0>;
+		backlight = <&backlight>;
+		reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc2v8_lcd>;
+		iovcc-supply = <&vcc1v8_lcd>;
+		pinctrl-names = "default";
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
 &pmu_io_domains {
 	pmu1830-supply = <&vcc_1v8>;
 	status = "okay";
@@ -429,6 +536,15 @@
 	status = "okay";
 };
 
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -479,3 +595,27 @@
 &uart2 {
 	status = "okay";
 };
+
+&vopb {
+	status = "okay";
+	assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>,
+			  <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+	assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
+	assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>;
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+	assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>,
+			  <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+	assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
+	assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>;
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 78157521e944..bca2b50e0a93 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -647,16 +647,10 @@
 		avdd-supply = <&avdd>;
 		backlight = <&backlight>;
 		dvdd-supply = <&vcc3v3_s0>;
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
 
-			port@0 {
-				reg = <0>;
-
-				mipi_in_panel: endpoint {
-					remote-endpoint = <&mipi_out_panel>;
-				};
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 1881b4b71f91..928948e7c7bb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -552,7 +552,7 @@
 		      <0x0 0xfff10000 0 0x10000>, /* GICH */
 		      <0x0 0xfff20000 0 0x10000>; /* GICV */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
-		its: interrupt-controller@fee20000 {
+		its: msi-controller@fee20000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
@@ -1954,7 +1954,7 @@
 		};
 	};
 
-	mipi_dsi: mipi@ff960000 {
+	mipi_dsi: dsi@ff960000 {
 		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x0 0xff960000 0x0 0x8000>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1982,15 +1982,20 @@
 					reg = <0>;
 					remote-endpoint = <&vopb_out_mipi>;
 				};
+
 				mipi_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_mipi>;
 				};
 			};
+
+			mipi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-	mipi_dsi1: mipi@ff968000 {
+	mipi_dsi1: dsi@ff968000 {
 		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x0 0xff968000 0x0 0x8000>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2025,10 +2030,14 @@
 					remote-endpoint = <&vopl_out_mipi1>;
 				};
 			};
+
+			mipi1_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-	edp: edp@ff970000 {
+	edp: dp@ff970000 {
 		compatible = "rockchip,rk3399-edp";
 		reg = <0x0 0xff970000 0x0 0x8000>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2045,6 +2054,7 @@
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
 			edp_in: port@0 {
 				reg = <0>;
 				#address-cells = <1>;
@@ -2060,6 +2070,10 @@
 					remote-endpoint = <&vopl_out_edp>;
 				};
 			};
+
+			edp_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
index 65a80d1f6d91..2a2821f4c580 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
@@ -16,8 +16,52 @@
 };
 
 &cru {
-	assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
-	assigned-clock-rates = <1200000000>, <200000000>, <241500000>;
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <241500000>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "anbernic,rg353p-panel", "newvision,nv3051d";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
 };
 
 &gpio_keys_control {
@@ -55,6 +99,22 @@
 	};
 };
 
+&pinctrl {
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
 &pwm4 {
 	status = "okay";
 };
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
index b4b2df821cba..c763c7f3b1b3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
@@ -105,8 +105,10 @@
 };
 
 &cru {
-	assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
-	assigned-clock-rates = <1200000000>, <200000000>, <500000000>;
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <500000000>;
 };
 
 &dsi_dphy0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
index 41262a69d33e..8fadd8afb190 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -716,7 +716,7 @@
 	status = "okay";
 
 	bluetooth {
-		compatible = "realtek,rtl8821cs-bt";
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8822cs-bt";
 		device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
 		enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
index 2671f207cfd1..410cd3e5e7bc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -495,7 +495,7 @@
 };
 
 &usb2phy0_otg {
-	vbus-supply = <&vcc5v0_usb2_otg>;
+	phy-supply = <&vcc5v0_usb2_otg>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
index d89d5263cb5e..5e4236af4fcb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
@@ -254,6 +254,14 @@
 	status = "okay";
 };
 
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
 &vop {
 	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
 	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
index ce7165d7f1a1..102e448bc026 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -598,7 +598,7 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
-	sd-uhs-sdr104;
+	sd-uhs-sdr50;
 	vmmc-supply = <&vcc3v3_sys>;
 	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
new file mode 100644
index 000000000000..f70ca9f0470a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3568-nanopi-r5s.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R5C";
+	compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reset_button_pin>;
+
+		button-reset {
+			debounce-interval = <50>;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>;
+
+		led-lan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_led: led-power {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wlan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20_reset_pin>;
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		power_led_pin: power-led-pin {
+			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led_pin: wlan-led-pin {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie20_reset_pin: pcie20-reset-pin {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
new file mode 100644
index 000000000000..2a1118f15c29
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3568-nanopi-r5s.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R5S";
+	compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
+
+		led-lan1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <1>;
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-lan2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <2>;
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_led: led-power {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 15ms, 50ms for rtl8211f */
+	snps,reset-delays-us = <0 15000 50000>;
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&pcie2x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	num-ib-windows = <8>;
+	num-ob-windows = <8>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac0 {
+		eth_phy0_reset_pin: eth-phy0-reset-pin {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		lan1_led_pin: lan1-led-pin {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lan2_led_pin: lan2-led-pin {
+			rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		power_led_pin: power-led-pin {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
new file mode 100644
index 000000000000..58ba328ea782
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vdd_usbc: vdd-usbc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usbc";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_usbc>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_usbc>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_usbc>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0-usb-host-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index eed0059a68b8..f62e0fd881a9 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -744,8 +744,8 @@
 		compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x00 0xfe060000 0x00 0x10000>;
 		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "pclk", "hclk";
-		clocks = <&cru PCLK_DSITX_0>, <&cru HCLK_VO>;
+		clock-names = "pclk";
+		clocks = <&cru PCLK_DSITX_0>;
 		phy-names = "dphy";
 		phys = <&dsi_dphy0>;
 		power-domains = <&power RK3568_PD_VO>;
@@ -772,8 +772,8 @@
 		compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x0 0xfe070000 0x0 0x10000>;
 		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "pclk", "hclk";
-		clocks = <&cru PCLK_DSITX_1>, <&cru HCLK_VO>;
+		clock-names = "pclk";
+		clocks = <&cru PCLK_DSITX_1>;
 		phy-names = "dphy";
 		phys = <&dsi_dphy1>;
 		power-domains = <&power RK3568_PD_VO>;
@@ -1808,6 +1808,7 @@
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
 			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -1819,6 +1820,7 @@
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
 			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -1830,6 +1832,7 @@
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
 			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -1841,6 +1844,7 @@
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
 			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -1852,6 +1856,7 @@
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
 			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 95805cb0adfa..3e4aee8f70c1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -2,6 +2,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "rk3588.dtsi"
 
 / {
@@ -17,6 +18,31 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 95 145 195 255>;
+		fan-supply = <&vcc5v0_sys>;
+		pwms = <&pwm1 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "Analog";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+	};
+
 	vcc5v0_sys: vcc5v0-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
@@ -27,6 +53,132 @@
 	};
 };
 
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
 &sdhci {
 	bus-width = <8>;
 	no-sdio;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
index d085e57fbc4c..8be75556af8f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
@@ -7,6 +7,74 @@
 #include "rk3588-pinctrl.dtsi"
 
 / {
+	i2s8_8ch: i2s@fddc8000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddc8000 0x0 0x1000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 22>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO0>;
+		resets = <&cru SRST_M_I2S8_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s6_8ch: i2s@fddf4000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddf4000 0x0 0x1000>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 4>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S6_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s7_8ch: i2s@fddf8000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddf8000 0x0 0x1000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 21>;
+		dma-names = "rx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S7_8CH_RX>;
+		reset-names = "rx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s10_8ch: i2s@fde00000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfde00000 0x0 0x1000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 24>;
+		dma-names = "rx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S10_8CH_RX>;
+		reset-names = "rx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	gmac0: ethernet@fe1b0000 {
 		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe1b0000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
new file mode 100644
index 000000000000..93b4a0c4ed0f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Khadas Edge2";
+	compatible = "khadas,edge2", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 005cde61b4b2..657c019d27fa 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -60,6 +60,8 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <530>;
 			clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			assigned-clock-rates = <816000000>;
 			cpu-idle-states = <&CPU_SLEEP>;
 			i-cache-size = <32768>;
 			i-cache-line-size = <64>;
@@ -136,6 +138,8 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+			assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+			assigned-clock-rates = <816000000>;
 			cpu-idle-states = <&CPU_SLEEP>;
 			i-cache-size = <65536>;
 			i-cache-line-size = <64>;
@@ -174,6 +178,8 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+			assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+			assigned-clock-rates = <816000000>;
 			cpu-idle-states = <&CPU_SLEEP>;
 			i-cache-size = <65536>;
 			i-cache-line-size = <64>;
@@ -222,6 +228,7 @@
 			cache-size = <131072>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 			next-level-cache = <&l3_cache>;
 		};
 
@@ -230,6 +237,7 @@
 			cache-size = <131072>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 			next-level-cache = <&l3_cache>;
 		};
 
@@ -238,6 +246,7 @@
 			cache-size = <131072>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 			next-level-cache = <&l3_cache>;
 		};
 
@@ -246,6 +255,7 @@
 			cache-size = <131072>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
 			next-level-cache = <&l3_cache>;
 		};
 
@@ -254,6 +264,7 @@
 			cache-size = <524288>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
+			cache-level = <2>;
 			next-level-cache = <&l3_cache>;
 		};
 
@@ -262,6 +273,7 @@
 			cache-size = <524288>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
+			cache-level = <2>;
 			next-level-cache = <&l3_cache>;
 		};
 
@@ -270,6 +282,7 @@
 			cache-size = <524288>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
+			cache-level = <2>;
 			next-level-cache = <&l3_cache>;
 		};
 
@@ -278,6 +291,7 @@
 			cache-size = <524288>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
+			cache-level = <2>;
 			next-level-cache = <&l3_cache>;
 		};
 
@@ -286,6 +300,7 @@
 			cache-size = <3145728>;
 			cache-line-size = <64>;
 			cache-sets = <4096>;
+			cache-level = <3>;
 		};
 	};
 
@@ -304,10 +319,6 @@
 
 			scmi_clk: protocol@14 {
 				reg = <0x14>;
-				assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>,
-						  <&scmi_clk SCMI_CLK_CPUB23>;
-				assigned-clock-rates = <1200000000>,
-						       <1200000000>;
 				#clock-cells = <1>;
 			};
 
@@ -414,7 +425,7 @@
 			<&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>,
 			<&cru CLK_GPU>;
 		assigned-clock-rates =
-			<100000000>, <786432000>,
+			<1100000000>, <786432000>,
 			<850000000>, <1188000000>,
 			<702000000>,
 			<400000000>, <500000000>,
@@ -810,6 +821,57 @@
 		};
 	};
 
+	i2s4_8ch: i2s@fddc0000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddc0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 0>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO0>;
+		resets = <&cru SRST_M_I2S4_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s5_8ch: i2s@fddf0000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddf0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 2>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S5_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s9_8ch: i2s@fddfc000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddfc000 0x0 0x1000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 23>;
+		dma-names = "rx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S9_8CH_RX>;
+		reset-names = "rx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	qos_gpu_m0: qos@fdf35000 {
 		compatible = "rockchip,rk3588-qos", "syscon";
 		reg = <0x0 0xfdf35000 0x0 0x20>;
@@ -1099,6 +1161,21 @@
 		};
 	};
 
+	sdmmc: mmc@fe2c0000 {
+		compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe2c0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&scmi_clk SCMI_HCLK_SD>, <&scmi_clk SCMI_CCLK_SD>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+		power-domains = <&power RK3588_PD_SDMMC>;
+		status = "disabled";
+	};
+
 	sdhci: mmc@fe2e0000 {
 		compatible = "rockchip,rk3588-dwcmshc";
 		reg = <0x0 0xfe2e0000 0x0 0x10000>;
@@ -1117,6 +1194,103 @@
 		status = "disabled";
 	};
 
+	i2s0_8ch: i2s@fe470000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfe470000 0x0 0x1000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>;
+		dmas = <&dmac0 0>, <&dmac0 1>;
+		dma-names = "tx", "rx";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_lrck
+			     &i2s0_sclk
+			     &i2s0_sdi0
+			     &i2s0_sdi1
+			     &i2s0_sdi2
+			     &i2s0_sdi3
+			     &i2s0_sdo0
+			     &i2s0_sdo1
+			     &i2s0_sdo2
+			     &i2s0_sdo3>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1_8ch: i2s@fe480000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfe480000 0x0 0x1000>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac0 2>, <&dmac0 3>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_lrck
+			     &i2s1m0_sclk
+			     &i2s1m0_sdi0
+			     &i2s1m0_sdi1
+			     &i2s1m0_sdi2
+			     &i2s1m0_sdi3
+			     &i2s1m0_sdo0
+			     &i2s1m0_sdo1
+			     &i2s1m0_sdo2
+			     &i2s1m0_sdo3>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2_2ch: i2s@fe490000 {
+		compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xfe490000 0x0 0x1000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac1 0>, <&dmac1 1>;
+		dma-names = "tx", "rx";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2m1_lrck
+			     &i2s2m1_sclk
+			     &i2s2m1_sdi
+			     &i2s2m1_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s3_2ch: i2s@fe4a0000 {
+		compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xfe4a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		assigned-clocks = <&cru CLK_I2S3_2CH_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac1 2>, <&dmac1 3>;
+		dma-names = "tx", "rx";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s3_lrck
+			     &i2s3_sclk
+			     &i2s3_sdi
+			     &i2s3_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	gic: interrupt-controller@fe600000 {
 		compatible = "arm,gic-v3";
 		reg = <0x0 0xfe600000 0 0x10000>, /* GICD */
@@ -1226,6 +1400,14 @@
 		status = "disabled";
 	};
 
+	wdt: watchdog@feaf0000 {
+		compatible = "rockchip,rk3588-wdt", "snps,dw-wdt";
+		reg = <0x0 0xfeaf0000 0x0 0x100>;
+		clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>;
+		clock-names = "tclk", "pclk";
+		interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
 	spi0: spi@feb00000 {
 		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
 		reg = <0x0 0xfeb00000 0x0 0x1000>;
@@ -1557,6 +1739,26 @@
 		status = "disabled";
 	};
 
+	tsadc: tsadc@fec00000 {
+		compatible = "rockchip,rk3588-tsadc";
+		reg = <0x0 0xfec00000 0x0 0x400>;
+		interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		assigned-clocks = <&cru CLK_TSADC>;
+		assigned-clock-rates = <2000000>;
+		resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb", "tsadc";
+		rockchip,hw-tshut-temp = <120000>;
+		rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+		rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+		pinctrl-0 = <&tsadc_gpio_func>;
+		pinctrl-1 = <&tsadc_shut>;
+		pinctrl-names = "gpio", "otpout";
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
 	i2c6: i2c@fec80000 {
 		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
 		reg = <0x0 0xfec80000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index f4f1f5148cc2..97522fb0bf66 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
 			sp9860g-1h10.dtb	\
-			sp9863a-1h10.dtb
+			sp9863a-1h10.dtb	\
+			ums512-1h10.dtb
diff --git a/arch/arm64/boot/dts/sprd/ums512-1h10.dts b/arch/arm64/boot/dts/sprd/ums512-1h10.dts
new file mode 100644
index 000000000000..46890f6d140d
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums512-1h10.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS512-1h10 boards DTS file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "ums512.dtsi"
+
+/ {
+	model = "Unisoc UMS512-1H10 Board";
+
+	compatible = "sprd,ums512-1h10", "sprd,ums512";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+/* SD card */
+&sdio0 {
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	sprd,phy-delay-sd-uhs-sdr104 = <0x7f 0x73 0x72 0x72>;
+	sprd,phy-delay-sd-uhs-sdr50 = <0x6e 0x7f 0x01 0x01>;
+	sprd,phy-delay-sd-highspeed = <0x7f 0x1a 0x9a 0x9a>;
+	sprd,phy-delay-legacy = <0x7f 0x1a 0x9a 0x9a>;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+};
+
+/* EMMC storage */
+&sdio3 {
+	status = "okay";
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	cap-mmc-hw-reset;
+};
diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi
new file mode 100644
index 000000000000..024be594c47d
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums512.dtsi
@@ -0,0 +1,911 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS512 SoC DTS file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+#include <dt-bindings/clock/sprd,ums512-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@12000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x12000000 0 0x20000>,	/* GICD */
+			      <0x0 0x12040000 0 0x100000>;	/* GICR */
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ap_ahb_regs: syscon@20100000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x20100000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x20100000 0x4000>;
+
+			apahb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-apahb-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		pub_apb_regs: syscon@31050000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x31050000 0 0x9000>;
+		};
+
+		top_dvfs_apb_regs: syscon@322a0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x322a0000 0 0x8000>;
+		};
+
+		ap_intc0_regs: syscon@32310000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32310000 0 0x1000>;
+		};
+
+		ap_intc1_regs: syscon@32320000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32320000 0 0x1000>;
+		};
+
+		ap_intc2_regs: syscon@32330000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32330000 0 0x1000>;
+		};
+
+		ap_intc3_regs: syscon@32340000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32340000 0 0x1000>;
+		};
+
+		ap_intc4_regs: syscon@32350000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32350000 0 0x1000>;
+		};
+
+		ap_intc5_regs: syscon@32360000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32360000 0 0x1000>;
+		};
+
+		anlg_phy_g0_regs: syscon@32390000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32390000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x32390000 0x3000>;
+
+			dpll0: clock-controller@0 {
+				compatible = "sprd,ums512-g0-pll";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g2_regs: syscon@323b0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323b0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323b0000 0x3000>;
+
+			mpll1: clock-controller@0 {
+				compatible = "sprd,ums512-g2-pll";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g3_regs: syscon@323c0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323c0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323c0000 0x3000>;
+
+			pll1: clock-controller@0 {
+				compatible = "sprd,ums512-g3-pll";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_gc_regs: syscon@323e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323e0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323e0000 0x3000>;
+
+			pll2: clock-controller@0 {
+				compatible = "sprd,ums512-gc-pll";
+				reg = <0x0 0x100>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g10_regs: syscon@323f0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323f0000 0 0x3000>;
+		};
+
+		aon_apb_regs: syscon@327d0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x327d0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x327d0000 0x3000>;
+
+			aonapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-aon-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		pmu_apb_regs: syscon@327e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x327e0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x327e0000 0x3000>;
+
+			pmu_gate: clock-controller@0 {
+				compatible = "sprd,ums512-pmu-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		audcp_apb_regs: syscon@3350d000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x3350d000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x3350d000 0x1000>;
+
+			audcpapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-audcpapb-gate";
+				reg = <0x0 0x300>;
+				#clock-cells = <1>;
+			};
+		};
+
+		audcp_ahb_regs: syscon@335e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x335e0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x335e0000 0x1000>;
+
+			audcpahb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-audcpahb-gate";
+				reg = <0x0 0x300>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpu_apb_regs: syscon@60100000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60100000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x60100000 0x3000>;
+
+			gpu_clk: clock-controller@0 {
+				compatible = "sprd,ums512-gpu-clk";
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpu_dvfs_apb_regs: syscon@60110000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60110000 0 0x3000>;
+		};
+
+		mm_ahb_regs: syscon@62200000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x62200000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x62200000 0x3000>;
+
+			mm_gate: clock-controller@0 {
+				compatible = "sprd,ums512-mm-gate-clk";
+				reg = <0x0 0x3000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_apb_regs: syscon@71000000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x71000000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x71000000 0x3000>;
+
+			apapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-apapb-gate";
+				reg = <0x0 0x3000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_clk: clock-controller@20200000 {
+			compatible = "sprd,ums512-ap-clk";
+			reg = <0 0x20200000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		aon_clk: clock-controller@32080000 {
+			compatible = "sprd,ums512-aonapb-clk";
+			reg = <0 0x32080000 0 0x1000>;
+			clocks = <&ext_26m>, <&ext_32k>,
+				 <&ext_4m>, <&rco_100m>;
+			clock-names = "ext-26m", "ext-32k",
+				      "ext-4m", "rco-100m";
+			#clock-cells = <1>;
+		};
+
+		mm_clk: clock-controller@62100000 {
+			compatible = "sprd,ums512-mm-clk";
+			reg = <0 0x62100000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		/* SoC Funnel */
+		funnel@3c002000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3c002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_out_port>;
+					};
+				};
+			};
+		};
+
+		/* SoC ETF */
+		soc_etb: etb@3c003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3c003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU Funnel for core3/4/5/7 */
+		funnel@3e001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_lit_out_port: endpoint {
+						remote-endpoint =
+						<&corinth_etf_lit_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_core_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_core_in_port4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_core_in_port5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_core_in_port7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU ETF for little cores */
+		etf@3e002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3e002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					corinth_etf_lit_out: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_from_lit_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					corinth_etf_lit_in: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_lit_out_port>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU ETF for big cores */
+		etf@3e003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3e003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					corinth_etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_from_big_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					corinth_etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_big_out_port>;
+					};
+				};
+			};
+		};
+
+		/* Funnel to SoC */
+		funnel@3e004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_corinth_from_lit_in_port: endpoint {
+						remote-endpoint = <&corinth_etf_lit_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_corinth_from_big_in_port: endpoint {
+						remote-endpoint = <&corinth_etf_big_out>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU Funnel for core0/1/2/6 */
+		funnel@3e005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_big_out_port: endpoint {
+						remote-endpoint = <&corinth_etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_core_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_core_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_core_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_core_in_port6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+			};
+		};
+
+		etm0: etm@3f040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@3f140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@3f240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@3f340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm4: etm@3f440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port4>;
+					};
+				};
+			};
+		};
+
+		etm5: etm@3f540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port5>;
+					};
+				};
+			};
+		};
+
+		etm6: etm@3f640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port6>;
+					};
+				};
+			};
+		};
+
+		etm7: etm@3f740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port7>;
+					};
+				};
+			};
+		};
+
+		apb@70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,ums512-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,ums512-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			sdio0: mmc@1100000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0x1100000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "sdio", "enable";
+				clocks = <&ap_clk CLK_SDIO0_2X>,
+					 <&apapb_gate CLK_SDIO0_EB>;
+				assigned-clocks = <&ap_clk CLK_SDIO0_2X>;
+				assigned-clock-parents = <&pll1 CLK_RPLL>;
+				status = "disabled";
+			};
+
+			sdio3: mmc@1400000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0x1400000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "sdio", "enable";
+				clocks = <&ap_clk CLK_EMMC_2X>,
+					 <&apapb_gate CLK_EMMC_EB>;
+				assigned-clocks = <&ap_clk CLK_EMMC_2X>;
+				assigned-clock-parents = <&pll1 CLK_RPLL>;
+				status = "disabled";
+			};
+		};
+
+		aon: bus@32000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x32000000 0x1000000>;
+
+			adi_bus: spi@100000 {
+				compatible = "sprd,ums512-adi";
+				reg = <0x100000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sprd,hw-channels = <2 0x18cc>, <3 0x18cc>, <13 0x1854>, <15 0x1874>,
+					<17 0x1844>,<19 0x1844>, <21 0x1864>, <30 0x1820>,
+					<35 0x19b8>, <39 0x19ac>;
+			};
+		};
+	};
+
+	ext_26m: clk-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_32k: clk-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_4m: clk-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	rco_100m: clk-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 6acd12409d59..c83c9d772b81 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -9,7 +9,9 @@
 # alphabetically.
 
 # Boards with AM62x SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
 
 # Boards with AM62Ax SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
@@ -28,11 +30,13 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
 
 # Boards with J7200 SoC
-dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb
+k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm.dtb
 
 # Boards with J721e SoC
+k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 
 # Boards with J721s2 SoC
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
new file mode 100644
index 000000000000..4b94f7a86316
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM62x LP SK: https://www.ti.com/tool/SK-AM62-LP
+ *
+ * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62x-sk-common.dtsi"
+
+/ {
+	compatible = "ti,am62-lp-sk", "ti,am625";
+	model = "Texas Instruments AM62x LP SK";
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of TPS630702RNMR */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-2 {
+		/* output of LM61460-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc_3v3_sys>;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	vddshv_sdio: regulator-4 {
+		compatible = "regulator-gpio";
+		regulator-name = "vddshv_sdio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vddshv_sdio_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&ldo1_reg>;
+		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+};
+
+&main_pmx0 {
+	vddshv_sdio_pins_default: vddshv-sdio-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
+		>;
+	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (B16) EXTINTn */
+		>;
+	};
+};
+
+&main_i2c1 {
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				   "PRU_DETECT", "MMC1_SD_EN",
+				   "VPP_LDO_EN", "EXP_PS_3V3_En",
+				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+				   "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC",
+				   "GPIO_HDMI_RSTn", "CSI_GPIO0",
+				   "CSI_GPIO1", "GPIO_OLDI_INT",
+				   "HDMI_INTn", "TEST_GPIO2",
+				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+				   "MCASP1_FET_SEL", "UART1_FET_SEL",
+				   "", "IO_EXP_TEST_LED";
+
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+	};
+
+	exp2: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "", "",
+				   "", "",
+				   "", "",
+				   "", "",
+				   "WL_LT_EN", "CSI_RSTz",
+				   "", "",
+				   "", "",
+				   "", "",
+				   "SPI0_FET_SEL", "SPI0_FET_OE",
+				   "GPIO_OLDI_RSTn", "PRU_3V3_EN",
+				   "", "",
+				   "CSI_VLDO_SEL", "SOC_WLAN_SDIO_RST";
+	};
+};
+
+&sdhci1 {
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vddshv_sdio>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&main_i2c0 {
+	tps65219: pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vcc_3v3_sys>;
+		buck2-supply = <&vcc_3v3_sys>;
+		buck3-supply = <&vcc_3v3_sys>;
+		ldo1-supply = <&vcc_3v3_sys>;
+		ldo2-supply = <&buck2_reg>;
+		ldo3-supply = <&vcc_3v3_sys>;
+		ldo4-supply = <&vcc_3v3_sys>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		ti,power-button;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "VCC1V8_SYS";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "VDD_LPDDR4";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "VDDSHV_SDIO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "VDDAR_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&tlv320aic3106 {
+	DVDD-supply = <&buck2_reg>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index ea683fd77d6a..b3e4857bbbe4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -461,7 +461,7 @@
 			     <193>, <194>, <195>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <87>;
+		ti,ngpio = <92>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 77 0>;
@@ -478,7 +478,7 @@
 			     <183>, <184>, <185>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <88>;
+		ti,ngpio = <52>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 78 0>;
@@ -758,6 +758,51 @@
 		status = "disabled";
 	};
 
+	main_rti0: watchdog@e000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	main_rti2: watchdog@e020000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e020000 0x00 0x100>;
+		clocks = <&k3_clks 127 0>;
+		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 127 0>;
+		assigned-clock-parents = <&k3_clks 127 2>;
+	};
+
+	main_rti3: watchdog@e030000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e030000 0x00 0x100>;
+		clocks = <&k3_clks 128 0>;
+		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 128 0>;
+		assigned-clock-parents = <&k3_clks 128 2>;
+	};
+
+	main_rti15: watchdog@e0f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e0f0000 0x00 0x100>;
+		clocks = <&k3_clks 130 0>;
+		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 130 0>;
+		assigned-clock-parents = <&k3_clks 130 2>;
+	};
+
 	epwm0: pwm@23000000 {
 		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
 		#pwm-cells = <3>;
@@ -787,4 +832,64 @@
 		clock-names = "tbclk", "fck";
 		status = "disabled";
 	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index a427231527c3..076601a41e84 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -130,4 +130,15 @@
 		clocks = <&k3_clks 79 0>;
 		clock-names = "gpio";
 	};
+
+	mcu_rti0: watchdog@4880000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x04880000 0x00 0x100>;
+		clocks = <&k3_clks 131 0>;
+		power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 131 0>;
+		assigned-clock-parents = <&k3_clks 131 2>;
+		/* Tightly coupled to M4F */
+		status = "reserved";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 38dced6b4fef..7726ebae2539 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -40,4 +40,25 @@
 		clock-names = "fck";
 		status = "disabled";
 	};
+
+	wkup_rtc0: rtc@2b1f0000 {
+		compatible = "ti,am62-rtc";
+		reg = <0x00 0x2b1f0000 0x00 0x100>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
+		clock-names = "vbus", "osc32k";
+		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
+		wakeup-source;
+	};
+
+	wkup_rti0: watchdog@2b000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2b000000 0x00 0x100>;
+		clocks = <&k3_clks 132 0>;
+		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 132 0>;
+		assigned-clock-parents = <&k3_clks 132 2>;
+		/* Used by DM firmware */
+		status = "reserved";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index 37fcbe7a3c33..a401f5225243 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM625 SoC";
 	compatible = "ti,am625";
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
new file mode 100644
index 000000000000..cb46c38ce2cc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -0,0 +1,758 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * https://beagleplay.org/
+ *
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "k3-am625.dtsi"
+
+/ {
+	compatible =  "beagle,am625-beagleplay", "ti,am625";
+	model = "BeagleBoard.org BeaglePlay";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		gpio0 = &main_gpio0;
+		gpio1 = &main_gpio1;
+		gpio2 = &mcu_gpio0;
+		i2c0 = &main_i2c0;
+		i2c1 = &main_i2c1;
+		i2c2 = &main_i2c2;
+		i2c3 = &main_i2c3;
+		i2c4 = &wkup_i2c0;
+		i2c5 = &mcu_i2c0;
+		mdio-gpio0 = &mdio0;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		rtc0 = &rtc;
+		serial0 = &main_uart5;
+		serial1 = &main_uart6;
+		serial2 = &main_uart0;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops: ramoops@9ca00000 {
+			compatible = "ramoops";
+			reg = <0x00 0x9c700000 0x00 0x00100000>;
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x00>;
+			pmsg-size = <0x8000>;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+
+	vsys_5v0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3: regulator-2 {
+		/* output of TLV62595DMQR-U12 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wlan_en: regulator-3 {
+		/* OUTPUT of SN74AVC2T244DQMR */
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vdd_3v3>;
+		gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_pins_default>;
+	};
+
+	vdd_3v3_sd: regulator-4 {
+		/* output of TPS22918DBVR-U21 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_3v3_sd_pins_default>;
+
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vdd_3v3>;
+		gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-5 {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_hs200_switch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&ldo1_reg>;
+		gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+
+		led-1 {
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			default-state = "keep";
+		};
+
+		led-2 {
+			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CPU;
+		};
+
+		led-3 {
+			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_LAN;
+		};
+
+		led-4 {
+			gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_WLAN;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_button_pins_default>;
+
+		usr: button-usr {
+			label = "User Key";
+			linux,code = <BTN_0>;
+			gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	/* Workaround for errata i2329 - just use mdio bitbang */
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mdio0_pins_default>;
+		gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpsw3g_phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		cpsw3g_phy1: ethernet-phy@1 {
+			reg = <1>;
+			reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <25>;
+			reset-deassert-us = <60000>; /* T2 */
+		};
+	};
+};
+
+&main_pmx0 {
+	gpio0_pins_default: gpio0-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
+			AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
+			AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
+			AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
+			AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
+			AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
+			AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */
+			AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */
+			AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */
+			AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */
+			AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */
+			AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */
+			AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
+			AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	usr_button_pins_default: usr-button-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */
+		>;
+	};
+
+	grove_pins_default: grove-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+			AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+		>;
+	};
+
+	local_i2c_pins_default: local-i2c-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+			AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+		>;
+	};
+
+	i2c2_1v8_pins_default: i2c2-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
+			AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	mdio0_pins_default: mdio0-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */
+			AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
+			AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
+			AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
+			AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
+			AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
+			AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
+			AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
+			AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
+			AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
+			AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
+			AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
+			AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
+		>;
+	};
+
+	emmc_pins_default: emmc-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+			AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
+	vdd_3v3_sd_pins_default: vdd-3v3-sd-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
+		>;
+	};
+
+	sd_pins_default: sd-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
+			AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+			AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
+			AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
+			AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
+			AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
+			AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
+		>;
+	};
+
+	wifi_pins_default: wifi-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
+			AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
+			AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
+			AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
+			AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
+			AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */
+			AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */
+			AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
+		>;
+	};
+
+	wifi_en_pins_default: wifi-en-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */
+		>;
+	};
+
+	wifi_wlirq_pins_default: wifi-wlirq-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */
+		>;
+	};
+
+	spe_pins_default: spe-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */
+			AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */
+			AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */
+			AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */
+			AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */
+			AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
+			AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
+			AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
+			AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
+			AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
+			AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
+		>;
+	};
+
+	mikrobus_i2c_pins_default: mikrobus-i2c-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */
+			AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */
+		>;
+	};
+
+	mikrobus_uart_pins_default: mikrobus-uart-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */
+			AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */
+		>;
+	};
+
+	mikrobus_spi_pins_default: mikrobus-spi-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */
+			AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */
+			AM62X_IOPAD(0x0194, PIN_INPUT, 1) /* (B19) MCASP0_AXR3.SPI2_D0 */
+			AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */
+		>;
+	};
+
+	mikrobus_gpio_pins_default: mikrobus-gpio-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
+			AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
+			AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
+		>;
+	};
+
+	console_pins_default: console-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
+			AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+		>;
+	};
+
+	wifi_debug_uart_pins_default: wifi-debug-uart-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
+			AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
+		>;
+	};
+
+	usb1_pins_default: usb1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	i2c_qwiic_pins_default: i2c-qwiic-pins-default {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */
+			AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
+		>;
+	};
+
+	gbe_pmx_obsclk: gbe-pmx-clk-default {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
+		>;
+	};
+
+	i2c_csi_pins_default: i2c-csi-pins-default {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */
+			AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */
+		>;
+	};
+
+	wifi_32k_clk: mcu-clk-out-pins-default {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */
+		>;
+	};
+};
+
+&a53_opp_table {
+	/* Requires VDD_CORE to be at 0.85V */
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+	};
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_csi_pins_default>;
+	clock-frequency = <400000>;
+	/* Enable with overlay for camera sensor */
+};
+
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_qwiic_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+};
+
+&usbss1 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>, <&spe_pins_default>,
+		    <&gbe_pmx_obsclk>;
+	assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
+	assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rmii";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	/* Workaround for errata i2329 - Use mdio bitbang */
+	status = "disabled";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_pins_default>;
+	gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT",	/* 0-2 */
+		"USR0", "USR1", "USR2", "USR3", "", "", "USR4",	/* 3-9 */
+		"EEPROM_WP",					/* 10 */
+		"CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2",	/* 11-12 */
+		"CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "",	/* 13-17 */
+		"USR_BUTTON", "", "", "", "", "", "", "", "",	/* 18-26 */
+		"", "", "", "", "", "", "", "", "", "HDMI_INT",	/* 27-36 */
+		"", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
+		"", "", "", "", "", "", "", "", "", "", "", "",	/* 43-54 */
+		"", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */
+		"", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */
+		"", "", "", "", "", "",				/* 79-84 */
+		"BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK",	/* 85-86 */
+		"", "", "", "", "";				/* 87-91 */
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_gpio_pins_default>;
+	gpio-line-names = "", "", "", "", "",			/* 0-4 */
+		"SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7",	/* 5-7 */
+		"MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9",		/* 8-9 */
+		"MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11",	/* 10-11 */
+		"MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0",	/* 12-13 */
+		"MIKROBUS_GPIO1_14",				/* 14 */
+		"", "", "", "", "VDD_3V3_SD", "", "",		/* 15-21 */
+		"MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23",	/* 22-23 */
+		"MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25",	/* 24-25 */
+		"", "", "", "", "", "", "", "", "", "", "", "",	/* 26-37 */
+		"", "", "", "", "", "", "", "", "", "",		/* 38-47 */
+		"SD_CD", "SD_VOLT_SEL", "", "";			/* 48-51 */
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&local_i2c_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "ti,bq32000";
+		reg = <0x68>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	tps65219: pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vsys_5v0>;
+		buck2-supply = <&vsys_5v0>;
+		buck3-supply = <&vsys_5v0>;
+		ldo1-supply = <&vdd_3v3>;
+		ldo2-supply = <&buck2_reg>;
+		ldo3-supply = <&vdd_3v3>;
+		ldo4-supply = <&vdd_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		system-power-controller;
+		ti,power-button;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				/*
+				 * Regulator is left as is unused, vdd_sd
+				 * is controlled via GPIO with bypass config
+				 * as per the NVM configuration
+				 */
+				regulator-name = "VDD_SD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allow-bypass;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "VDDA_0V85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "VDD_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&grove_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_1v8_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_i2c_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&main_spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_spi_pins_default>;
+	status = "okay";
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pins_default>;
+
+	vmmc-supply = <&vdd_3v3_sd>;
+	vqmmc-supply = <&vdd_sd_dv>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+	cd-debounce-delay-ms = <100>;
+	ti,fails-without-test-cd;
+	status = "okay";
+};
+
+&sdhci2 {
+	vmmc-supply = <&wlan_en>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
+	bus-width = <4>;
+	non-removable;
+	ti,fails-without-test-cd;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	ti,driver-strength-ohm = <50>;
+	assigned-clocks = <&k3_clks 157 158>;
+	assigned-clock-parents = <&k3_clks 157 160>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1807";
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_wlirq_pins_default>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <41 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&console_pins_default>;
+	status = "okay";
+};
+
+&main_uart1 {
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+};
+
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_uart_pins_default>;
+	status = "okay";
+};
+
+&main_uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wifi_debug_uart_pins_default>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 6bc7d63cf52f..2a1adda9bff6 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -7,32 +7,12 @@
 
 /dts-v1/;
 
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/net/ti-dp83867.h>
-#include "k3-am625.dtsi"
+#include "k3-am62x-sk-common.dtsi"
 
 / {
 	compatible = "ti,am625-sk", "ti,am625";
 	model = "Texas Instruments AM625 SK";
 
-	aliases {
-		serial2 = &main_uart0;
-		mmc0 = &sdhci0;
-		mmc1 = &sdhci1;
-		mmc2 = &sdhci2;
-		spi0 = &ospi0;
-		ethernet0 = &cpsw_port1;
-		ethernet1 = &cpsw_port2;
-		usb0 = &usb0;
-		usb1 = &usb1;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
-	};
-
 	opp-table {
 		/* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
 		opp-1400000000 {
@@ -49,39 +29,6 @@
 
 	};
 
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ramoops@9ca00000 {
-			compatible = "ramoops";
-			reg = <0x00 0x9ca00000 0x00 0x00100000>;
-			record-size = <0x8000>;
-			console-size = <0x8000>;
-			ftrace-size = <0x00>;
-			pmsg-size = <0x8000>;
-		};
-
-		secure_tfa_ddr: tfa@9e780000 {
-			reg = <0x00 0x9e780000 0x00 0x80000>;
-			alignment = <0x1000>;
-			no-map;
-		};
-
-		secure_ddr: optee@9e800000 {
-			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
-			alignment = <0x1000>;
-			no-map;
-		};
-
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9db00000 0x00 0xc00000>;
-			no-map;
-		};
-	};
-
 	vmain_pd: regulator-0 {
 		/* TPS65988 PD CONTROLLER OUTPUT */
 		compatible = "regulator-fixed";
@@ -141,107 +88,19 @@
 			 <3300000 0x1>;
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usr_led_pins_default>;
-
-		led-0 {
-			label = "am62-sk:green:heartbeat";
-			gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			function = LED_FUNCTION_HEARTBEAT;
-			default-state = "off";
-		};
+	vcc_1v8: regulator-5 {
+		/* output of TPS6282518DMQ */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 };
 
 &main_pmx0 {
-	main_uart0_pins_default: main-uart0-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
-			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
-		>;
-	};
-
-	main_i2c0_pins_default: main-i2c0-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
-			AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
-		>;
-	};
-
-	main_i2c1_pins_default: main-i2c1-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
-			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
-		>;
-	};
-
-	main_i2c2_pins_default: main-i2c2-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
-			AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
-		>;
-	};
-
-	main_mmc0_pins_default: main-mmc0-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
-			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
-			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
-			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
-			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
-			AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
-			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
-			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
-			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
-			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
-		>;
-	};
-
-	main_mmc1_pins_default: main-mmc1-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
-			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
-			AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
-			AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
-			AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
-			AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
-			AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
-		>;
-	};
-
-	usr_led_pins_default: usr-led-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
-		>;
-	};
-
-	main_mdio1_pins_default: main-mdio1-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
-			AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
-		>;
-	};
-
-	main_rgmii1_pins_default: main-rgmii1-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
-			AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
-			AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
-			AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
-			AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
-			AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
-			AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
-			AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
-			AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
-			AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
-			AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
-			AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
-		>;
-	};
-
 	main_rgmii2_pins_default: main-rgmii2-pins-default {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
@@ -286,43 +145,9 @@
 			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
 		>;
 	};
-
-	main_usb1_pins_default: main-usb1-pins-default {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
-		>;
-	};
-};
-
-&wkup_uart0 {
-	/* WKUP UART0 is used by DM firmware */
-	status = "reserved";
-};
-
-&main_uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_uart0_pins_default>;
-};
-
-&main_uart1 {
-	/* Main UART1 is used by TIFS firmware */
-	status = "reserved";
-};
-
-&main_i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_i2c0_pins_default>;
-	clock-frequency = <400000>;
 };
 
 &main_i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_i2c1_pins_default>;
-	clock-frequency = <400000>;
-
 	exp1: gpio@22 {
 		compatible = "ti,tca6424";
 		reg = <0x22>;
@@ -351,23 +176,9 @@
 	};
 };
 
-&sdhci0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mmc0_pins_default>;
-	ti,driver-strength-ohm = <50>;
-	disable-wp;
-};
-
 &sdhci1 {
-	/* SD/MMC */
-	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	vqmmc-supply = <&vdd_sd_dv>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
-	disable-wp;
 };
 
 &cpsw3g {
@@ -376,28 +187,12 @@
 		     &main_rgmii2_pins_default>;
 };
 
-&cpsw_port1 {
-	phy-mode = "rgmii-rxid";
-	phy-handle = <&cpsw3g_phy0>;
-};
-
 &cpsw_port2 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy1>;
 };
 
 &cpsw3g_mdio {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mdio1_pins_default>;
-
-	cpsw3g_phy0: ethernet-phy@0 {
-		reg = <0>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,min-output-impedance;
-	};
-
 	cpsw3g_phy1: ethernet-phy@1 {
 		reg = <1>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -473,21 +268,6 @@
 	};
 };
 
-&usbss0 {
-	status = "okay";
-	ti,vbus-divider;
-};
-
-&usbss1 {
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "peripheral";
-};
-
-&usb1 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_usb1_pins_default>;
+&tlv320aic3106 {
+	DVDD-supply = <&vcc_1v8>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi
index acc7f8ab6426..4193c2b3eed6 100644
--- a/arch/arm64/boot/dts/ti/k3-am625.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi
@@ -148,7 +148,7 @@
 		compatible = "cache";
 		cache-unified;
 		cache-level = <2>;
-		cache-size = <0x40000>;
+		cache-size = <0x80000>;
 		cache-line-size = <64>;
 		cache-sets = <512>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
index 6eb87c3f9f3c..fe60c9ce21e3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM62A SoC";
 	compatible = "ti,am62a7";
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 5c9012141ee2..f6a67f072dca 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -27,8 +27,9 @@
 
 	memory@80000000 {
 		device_type = "memory";
-		/* 2G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
 	};
 
 	reserved-memory {
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
index 9734549851c0..58f1c43edcf8 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
@@ -97,7 +97,7 @@
 		compatible = "cache";
 		cache-unified;
 		cache-level = <2>;
-		cache-size = <0x40000>;
+		cache-size = <0x80000>;
 		cache-line-size = <64>;
 		cache-sets = <512>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
new file mode 100644
index 000000000000..976f8303c84f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common dtsi for AM62x SK and derivatives
+ *
+ * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am625.dtsi"
+
+/ {
+	aliases {
+		serial2 = &main_uart0;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		spi0 = &ospi0;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@9ca00000 {
+			compatible = "ramoops";
+			reg = <0x00 0x9ca00000 0x00 0x00100000>;
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x00>;
+			pmsg-size = <0x8000>;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_led_pins_default>;
+
+		led-0 {
+			label = "am62-sk:green:heartbeat";
+			gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+
+	tlv320_mclk: clk-0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+	};
+
+	codec_audio: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62x-SKEVM";
+		simple-audio-card,widgets =
+			"Headphone",	"Headphone Jack",
+			"Line",		"Line In",
+			"Microphone",	"Microphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In",
+			"MIC3R",		"Microphone Jack",
+			"Microphone Jack",	"Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
+};
+
+&main_pmx0 {
+	/* First pad number is ALW package and second is AMC package */
+	main_uart0_pins_default: main-uart0-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */
+			AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */
+			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */
+			AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
+			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
+			AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */
+			AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */
+			AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */
+			AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */
+			AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17/C15) MMC1_SDCD */
+		>;
+	};
+
+	usr_led_pins_default: usr-led-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	main_mdio1_pins_default: main-mdio1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */
+			AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */
+		>;
+	};
+
+	main_rgmii1_pins_default: main-rgmii1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */
+			AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */
+			AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16/AA17) RGMII1_RD2 */
+			AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15/Y15) RGMII1_RD3 */
+			AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17/AA16) RGMII1_RXC */
+			AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17/W14) RGMII1_RX_CTL */
+			AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20/U14) RGMII1_TD0 */
+			AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20/AA19) RGMII1_TD1 */
+			AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18/Y17) RGMII1_TD2 */
+			AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18/AA18) RGMII1_TD3 */
+			AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19/W16) RGMII1_TXC */
+			AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */
+		>;
+	};
+
+	main_usb1_pins_default: main-usb1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */
+		>;
+	};
+
+	main_mcasp1_pins_default: main-mcasp1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24) GPMC0_BE0N_CLE.MCASP1_ACLKX */
+			AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEN.MCASP1_AXR0 */
+			AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23) GPMC0_ADVN_ALE.MCASP1_AXR2 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by DM firmware */
+	status = "reserved";
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+&main_uart1 {
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	tlv320aic3106: audio-codec@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <1>;	/* 2.0V */
+
+		/* Regulators */
+		AVDD-supply = <&vcc_3v3_sys>;
+		IOVDD-supply = <&vcc_3v3_sys>;
+		DRVDD-supply = <&vcc_3v3_sys>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mailbox0_cluster0 {
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&usbss0 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usbss1 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
+
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp1_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 2 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
index c858725133af..60fe95b48312 100644
--- a/arch/arm64/boot/dts/ti/k3-am64.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM642 SoC";
 	compatible = "ti,am642";
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index c538a0bf3cdd..3093ef6b9b23 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM654 SoC";
 	compatible = "ti,am654";
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 2091cd2431fb..27a43a8ecffd 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -60,7 +60,7 @@
 		regulator-boot-on;
 		enable-active-high;
 		vin-supply = <&vsys_3v3>;
-		gpio = <&exp1 10 GPIO_ACTIVE_HIGH>;
+		gpio = <&exp1 8 GPIO_ACTIVE_HIGH>;
 	};
 
 	vdd_sd_dv: regulator-tlv71033 {
@@ -264,12 +264,10 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		gpio-line-names = "CSI_VIO_SEL", "CSI_SEL_FPC_EXPn", "HDMI_PDn",
-					"HDMI_LS_OE", "DP0_3V3 _EN", "BOARDID_EEPROM_WP",
-					"CAN_STB", " ", "GPIO_uSD_PWR_EN", "eDP_ENABLE",
-					"IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_MCU_RGMII_RSTz",
-					"IO_EXP_CSI2_EXP_RSTz", " ", "CSI0_B_GPIO1",
-					"CSI1_B_GPIO1";
+		gpio-line-names = " ", " ", " ", " ", " ",
+				  "BOARDID_EEPROM_WP", "CAN_STB", " ",
+				  "GPIO_uSD_PWR_EN", " ", "IO_EXP_PCIe1_M.2_RTSz",
+				  "IO_EXP_MCU_RGMII_RST#", " ", " ", " ", " ";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso
new file mode 100644
index 000000000000..31b932eebc0a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for CPSW5G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with
+ * J7200 board.
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mux/ti-serdes.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1";
+		ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2";
+		ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3";
+		ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4";
+	};
+};
+
+&cpsw0 {
+	status = "okay";
+};
+
+&cpsw0_port1 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy0>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 1>;
+};
+
+&cpsw0_port2 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy1>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 2>;
+};
+
+&cpsw0_port3 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy2>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 3>;
+};
+
+&cpsw0_port4 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy3>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 4>;
+};
+
+&cpsw5g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_pins_default>;
+	reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>;
+	reset-post-delay-us = <120000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpsw5g_phy0: ethernet-phy@16 {
+		reg = <16>;
+	};
+	cpsw5g_phy1: ethernet-phy@17 {
+		reg = <17>;
+	};
+	cpsw5g_phy2: ethernet-phy@18 {
+		reg = <18>;
+	};
+	cpsw5g_phy3: ethernet-phy@19 {
+		reg = <19>;
+	};
+};
+
+&exp2 {
+	qsgmii-line-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "qsgmii-pwrdn-line";
+	};
+};
+
+&main_pmx0 {
+	mdio0_pins_default: mdio0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x00a8, PIN_OUTPUT, 5) /* (W19) UART8_TXD.MDIO0_MDC */
+			J721E_IOPAD(0x00a4, PIN_INPUT, 5) /* (W14) UART8_RXD.MDIO0_MDIO */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 138381f43ce4..ef352e32f19d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -39,6 +39,13 @@
 					<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
 		};
 
+		cpsw0_phy_gmii_sel: phy@4044 {
+			compatible = "ti,j7200-cpsw5g-phy-gmii-sel";
+			ti,qsgmii-main-ports = <1>;
+			reg = <0x4044 0x10>;
+			#phy-cells = <1>;
+		};
+
 		usb_serdes_mux: mux-controller@4000 {
 			compatible = "mmio-mux";
 			#mux-control-cells = <1>;
@@ -304,6 +311,87 @@
 		};
 	};
 
+	cpsw0: ethernet@c000000 {
+		compatible = "ti,j7200-cpswxg-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0xc000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>;
+		clocks = <&k3_clks 19 33>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xca00>,
+		       <&main_udmap 0xca01>,
+		       <&main_udmap 0xca02>,
+		       <&main_udmap 0xca03>,
+		       <&main_udmap 0xca04>,
+		       <&main_udmap 0xca05>,
+		       <&main_udmap 0xca06>,
+		       <&main_udmap 0xca07>,
+		       <&main_udmap 0x4a00>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cpsw0_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				status = "disabled";
+			};
+
+			cpsw0_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				status = "disabled";
+			};
+
+			cpsw0_port3: port@3 {
+				reg = <3>;
+				ti,mac-only;
+				label = "port3";
+				status = "disabled";
+			};
+
+			cpsw0_port4: port@4 {
+				reg = <4>;
+				ti,mac-only;
+				label = "port4";
+				status = "disabled";
+			};
+		};
+
+		cpsw5g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 19 33>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 19 16>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
 	main_pmx0: pinctrl@11c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
@@ -777,6 +865,94 @@
 		clock-names = "gpio";
 	};
 
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 266 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 267 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 268 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 269 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 270 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 271 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 272 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 273 1>;
+		status = "disabled";
+	};
+
 	watchdog0: watchdog@2200000 {
 		compatible = "ti,j7-rti-wdt";
 		reg = <0x0 0x2200000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index de56a0165bd0..331b4e482e41 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -305,6 +305,39 @@
 		status = "disabled";
 	};
 
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 274 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 275 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 0>;
+		status = "disabled";
+	};
+
 	fss: syscon@47000000 {
 		compatible = "syscon", "simple-mfd";
 		reg = <0x00 0x47000000 0x00 0x100>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index d74f86b0f622..bbe380c72a7e 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -7,9 +7,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J7200 SoC";
 	compatible = "ti,j7200";
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso
new file mode 100644
index 000000000000..6ff7b6ad33ed
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for CPSW9G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with
+ * J721E board.
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mux/ti-serdes.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-cadence.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1";
+		ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2";
+		ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3";
+		ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4";
+	};
+};
+
+&cpsw0 {
+	status = "okay";
+};
+
+&cpsw0_port1 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy0>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 1>;
+};
+
+&cpsw0_port2 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy1>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 2>;
+};
+
+&cpsw0_port3 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy2>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 3>;
+};
+
+&cpsw0_port4 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy3>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 4>;
+};
+
+&cpsw9g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_pins_default>;
+	reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>;
+	reset-post-delay-us = <120000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpsw9g_phy0: ethernet-phy@17 {
+		reg = <17>;
+	};
+	cpsw9g_phy1: ethernet-phy@16 {
+		reg = <16>;
+	};
+	cpsw9g_phy2: ethernet-phy@18 {
+		reg = <18>;
+	};
+	cpsw9g_phy3: ethernet-phy@19 {
+		reg = <19>;
+	};
+};
+
+&exp2 {
+	qsgmii-line-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "qsgmii-pwrdn-line";
+	};
+};
+
+&main_pmx0 {
+	mdio0_pins_default: mdio0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1bc, PIN_OUTPUT, 0) /* (V24) MDIO0_MDC */
+			J721E_IOPAD(0x1b8, PIN_INPUT, 0) /* (V26) MDIO0_MDIO */
+		>;
+	};
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_QSGMII_LANE2>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz0 {
+	status = "okay";
+};
+
+&serdes0 {
+	status = "okay";
+
+	assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>, <&serdes0 CDNS_SIERRA_PLL_CMNLC1>;
+	assigned-clock-parents = <&wiz0_pll1_refclk>, <&wiz0_pll1_refclk>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	serdes0_qsgmii_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_QSGMII>;
+		resets = <&serdes_wiz0 2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index c935622f0102..10c8a5fb4ee2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -61,6 +61,13 @@
 				      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
 		};
 
+		cpsw0_phy_gmii_sel: phy@4044 {
+			compatible = "ti,j721e-cpsw9g-phy-gmii-sel";
+			ti,qsgmii-main-ports = <2>, <2>;
+			reg = <0x4044 0x20>;
+			#phy-cells = <1>;
+		};
+
 		usb_serdes_mux: mux-controller@4000 {
 			compatible = "mmio-mux";
 			#mux-control-cells = <1>;
@@ -404,6 +411,115 @@
 		};
 	};
 
+	cpsw0: ethernet@c000000 {
+		compatible = "ti,j721e-cpswxg-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0xc000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x0c000000 0x0 0x200000>;
+		clocks = <&k3_clks 19 89>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xca00>,
+		       <&main_udmap 0xca01>,
+		       <&main_udmap 0xca02>,
+		       <&main_udmap 0xca03>,
+		       <&main_udmap 0xca04>,
+		       <&main_udmap 0xca05>,
+		       <&main_udmap 0xca06>,
+		       <&main_udmap 0xca07>,
+		       <&main_udmap 0x4a00>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cpsw0_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				status = "disabled";
+			};
+
+			cpsw0_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				status = "disabled";
+			};
+
+			cpsw0_port3: port@3 {
+				reg = <3>;
+				ti,mac-only;
+				label = "port3";
+				status = "disabled";
+			};
+
+			cpsw0_port4: port@4 {
+				reg = <4>;
+				ti,mac-only;
+				label = "port4";
+				status = "disabled";
+			};
+
+			cpsw0_port5: port@5 {
+				reg = <5>;
+				ti,mac-only;
+				label = "port5";
+				status = "disabled";
+			};
+
+			cpsw0_port6: port@6 {
+				reg = <6>;
+				ti,mac-only;
+				label = "port6";
+				status = "disabled";
+			};
+
+			cpsw0_port7: port@7 {
+				reg = <7>;
+				ti,mac-only;
+				label = "port7";
+				status = "disabled";
+			};
+
+			cpsw0_port8: port@8 {
+				reg = <8>;
+				ti,mac-only;
+				label = "port8";
+				status = "disabled";
+			};
+		};
+
+		cpsw9g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 19 89>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 19 16>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
 	main_crypto: crypto@4e00000 {
 		compatible = "ti,j721e-sa2ul";
 		reg = <0x0 0x4e00000 0x0 0x1200>;
@@ -1180,7 +1296,6 @@
 		ti,itap-del-sel-mmc-hs = <0xa>;
 		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,trm-icp = <0x8>;
-		ti,strobe-sel = <0x77>;
 		dma-coherent;
 	};
 
@@ -2329,4 +2444,92 @@
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
 		status = "disabled";
 	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 266 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 267 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 268 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 269 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 270 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 271 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 272 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 273 1>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 8ac78034d5d6..24e8125db8c4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -425,4 +425,37 @@
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
 		status = "disabled";
 	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 274 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 275 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 4640d280c85c..f650a7fd66b4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -687,10 +687,6 @@
 	status = "disabled";
 };
 
-&main_r5fss0_core0{
-	firmware-name = "pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f";
-};
-
 &usb_serdes_mux {
 	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 6975cae644d9..b912143b6a11 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -7,9 +7,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J721E SoC";
 	compatible = "ti,j721e";
@@ -135,6 +136,7 @@
 			 <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
 			 <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x0c000000 0x00 0x0c000000 0x00 0x0d000000>, /* CPSW9G */
 			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
 			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01800000>, /* PCIe Core*/
 			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index a7aa6cf08acd..b4b9edfe2d12 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -197,6 +197,32 @@
 			J721S2_WKUP_IOPAD(0x0c8, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */
 		>;
 	};
+
+	mcu_adc0_pins_default: mcu-adc0-pins-default {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (L25) MCU_ADC0_AIN0 */
+			J721S2_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN1 */
+			J721S2_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (M24) MCU_ADC0_AIN2 */
+			J721S2_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (L24) MCU_ADC0_AIN3 */
+			J721S2_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (L27) MCU_ADC0_AIN4 */
+			J721S2_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN5 */
+			J721S2_WKUP_IOPAD(0x14c, PIN_INPUT, 0) /* (M27) MCU_ADC0_AIN6 */
+			J721S2_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (M26) MCU_ADC0_AIN7 */
+		>;
+	};
+
+	mcu_adc1_pins_default: mcu-adc1-pins-default {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x154, PIN_INPUT, 0) /* (P25) MCU_ADC1_AIN0 */
+			J721S2_WKUP_IOPAD(0x158, PIN_INPUT, 0) /* (R25) MCU_ADC1_AIN1 */
+			J721S2_WKUP_IOPAD(0x15c, PIN_INPUT, 0) /* (P28) MCU_ADC1_AIN2 */
+			J721S2_WKUP_IOPAD(0x160, PIN_INPUT, 0) /* (P27) MCU_ADC1_AIN3 */
+			J721S2_WKUP_IOPAD(0x164, PIN_INPUT, 0) /* (N25) MCU_ADC1_AIN4 */
+			J721S2_WKUP_IOPAD(0x168, PIN_INPUT, 0) /* (P26) MCU_ADC1_AIN5 */
+			J721S2_WKUP_IOPAD(0x16c, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */
+			J721S2_WKUP_IOPAD(0x170, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */
+		>;
+	};
 };
 
 &main_gpio2 {
@@ -309,3 +335,21 @@
 	pinctrl-0 = <&mcu_mcan1_pins_default>;
 	phys = <&transceiver2>;
 };
+
+&tscadc0 {
+	pinctrl-0 = <&mcu_adc0_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	pinctrl-0 = <&mcu_adc1_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 8915132efcc1..2dd7865f7654 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1014,4 +1014,92 @@
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
 		status = "disabled";
 	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 339 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 339 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 340 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 340 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 341 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 341 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 342 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 342 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 343 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 343 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 344 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 344 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 345 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 346 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 346 1>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 0af242aa9816..a353705a7463 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -203,6 +203,39 @@
 		status = "disabled";
 	};
 
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 347 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 347 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 348 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 349 0>;
+		status = "disabled";
+	};
+
 	mcu_navss: bus@28380000{
 		compatible = "simple-mfd";
 		#address-cells = <2>;
@@ -306,4 +339,44 @@
 			ti,cpts-periodic-outputs = <2>;
 		};
 	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40200000 0x00 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40210000 0x00 0x1000>;
+		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
index 78295ee0fee5..376924726f1f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
@@ -10,9 +10,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 
 	model = "Texas Instruments K3 J721S2 SoC";
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index 8cd4a7ecc121..f33815953e77 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -21,6 +21,7 @@
 
 	aliases {
 		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
 		mmc1 = &main_sdhci1;
 		i2c0 = &main_i2c0;
 	};
@@ -140,6 +141,32 @@
 	};
 };
 
+&wkup_pmx0 {
+	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
+			J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
+			J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
+			J784S4_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
+			J784S4_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
+			J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
+			J784S4_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
+			J784S4_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
+			J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
+			J784S4_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
+			J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
+			J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-pins-default {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
+			J784S4_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
+		>;
+	};
+};
+
 &main_uart8 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -181,6 +208,14 @@
 	};
 };
 
+&main_sdhci0 {
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
 &main_sdhci1 {
 	/* SD card */
 	status = "okay";
@@ -194,3 +229,27 @@
 &main_gpio0 {
 	status = "okay";
 };
+
+&mcu_cpsw {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	mcu_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mcu_cpsw_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&mcu_phy0>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 7edf324ac159..e9169eb358c1 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -72,6 +72,25 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x00 0x4e00000 0x00 0x1200>;
+		power-domains = <&k3_pds 369 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>;
+
+		dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>,
+				<&main_udmap 0x4a41>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x4e10000 0x00 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x200>;
@@ -398,6 +417,7 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <280>;
 		dma-coherent;
 		dma-ranges;
 
@@ -1004,4 +1024,92 @@
 		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
 		status = "disabled";
 	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 376 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 376 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 377 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 377 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 378 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 378 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 379 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 379 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 380 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 380 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 381 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 381 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 382 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 382 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 383 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 383 1>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 93952af618f6..f04fcb614cbe 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -204,11 +204,45 @@
 		status = "disabled";
 	};
 
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 384 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 384 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 385 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 385 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 386 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 386 0>;
+		status = "disabled";
+	};
+
 	mcu_navss: bus@28380000{
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		ti,sci-dev-id = <323>;
 		dma-coherent;
 		dma-ranges;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
index 3eb0d0568959..2e03d84da7d2 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
@@ -10,9 +10,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J784S4 SoC";
 	compatible = "ti,j784s4";
diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
new file mode 100644
index 000000000000..c97548a3f42d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for pinctrl bindings for TI's K3 SoC
+ * family.
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#ifndef DTS_ARM64_TI_K3_PINCTRL_H
+#define DTS_ARM64_TI_K3_PINCTRL_H
+
+#define PULLUDEN_SHIFT		(16)
+#define PULLTYPESEL_SHIFT	(17)
+#define RXACTIVE_SHIFT		(18)
+
+#define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
+#define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
+
+#define PULL_UP			(1 << PULLTYPESEL_SHIFT | PULL_ENABLE)
+#define PULL_DOWN		(0 << PULLTYPESEL_SHIFT | PULL_ENABLE)
+
+#define INPUT_EN		(1 << RXACTIVE_SHIFT)
+#define INPUT_DISABLE		(0 << RXACTIVE_SHIFT)
+
+/* Only these macros are expected be used directly in device tree files */
+#define PIN_OUTPUT		(INPUT_DISABLE | PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(INPUT_DISABLE | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(INPUT_DISABLE | PULL_DOWN)
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN | PULL_DOWN)
+
+#define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM65X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM65X_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J721E_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J721E_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J721S2_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J721S2_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J784S4_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J784S4_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#endif
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
index 0fc32c036f30..b04829b3175d 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
@@ -485,7 +485,7 @@
 			      <0x0 0x28050000 0x0 0x00010000>,
 			      <0x0 0x24200000 0x0 0x00002000>,
 			      <0x0 0x24162000 0x0 0x00001000>;
-			reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
+			reg-names = "dbi", "config", "ulreg", "smu", "mpu";
 			device_type = "pci";
 			bus-range = <0x00 0xff>;
 			num-lanes = <2>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 7790ee42c68a..a24609e14d50 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -273,6 +273,8 @@ CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_NVME=m
 CONFIG_QCOM_COINCELL=m
 CONFIG_QCOM_FASTRPC=m
+CONFIG_BATTERY_QCOM_BATTMGR=m
+CONFIG_UCSI_PMIC_GLINK=m
 CONFIG_SRAM=y
 CONFIG_PCI_ENDPOINT_TEST=m
 CONFIG_EEPROM_AT24=m
@@ -367,11 +369,13 @@ CONFIG_AT803X_PHY=y
 CONFIG_REALTEK_PHY=y
 CONFIG_ROCKCHIP_PHY=y
 CONFIG_DP83867_PHY=y
+CONFIG_DP83TD510_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_RCAR=m
 CONFIG_CAN_RCAR_CANFD=m
 CONFIG_CAN_MCP251XFD=m
+CONFIG_MDIO_GPIO=y
 CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
 CONFIG_MDIO_BUS_MUX_MMIOREG=y
 CONFIG_USB_PEGASUS=m
@@ -418,6 +422,7 @@ CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8941_PWRKEY=y
 CONFIG_INPUT_PM8XXX_VIBRATOR=m
+CONFIG_INPUT_TPS65219_PWRBUTTON=m
 CONFIG_INPUT_PWM_BEEPER=m
 CONFIG_INPUT_PWM_VIBRA=m
 CONFIG_INPUT_HISI_POWERKEY=y
@@ -463,6 +468,8 @@ CONFIG_VIRTIO_CONSOLE=y
 CONFIG_IPMI_HANDLER=m
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_TCG_TPM=y
 CONFIG_TCG_TIS=m
 CONFIG_TCG_TIS_SPI=m
@@ -513,6 +520,7 @@ CONFIG_SPI_MESON_SPICC=m
 CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_MT65XX=y
 CONFIG_SPI_MTK_NOR=m
+CONFIG_SPI_OMAP24XX=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=y
@@ -545,7 +553,9 @@ CONFIG_PINCTRL_IMX8ULP=y
 CONFIG_PINCTRL_IMX93=y
 CONFIG_PINCTRL_MSM=y
 CONFIG_PINCTRL_IPQ8074=y
+CONFIG_PINCTRL_IPQ5332=y
 CONFIG_PINCTRL_IPQ6018=y
+CONFIG_PINCTRL_IPQ9574=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_MSM8953=y
 CONFIG_PINCTRL_MSM8976=y
@@ -556,19 +566,29 @@ CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_QDU1000=y
 CONFIG_PINCTRL_SA8775P=y
 CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SC7280=y
+CONFIG_PINCTRL_SC7280_LPASS_LPI=m
 CONFIG_PINCTRL_SC8180X=y
 CONFIG_PINCTRL_SC8280XP=y
+CONFIG_PINCTRL_SDM660=y
+CONFIG_PINCTRL_SDM670=y
 CONFIG_PINCTRL_SDM845=y
 CONFIG_PINCTRL_SM6115=y
+CONFIG_PINCTRL_SM6125=y
+CONFIG_PINCTRL_SM6350=y
+CONFIG_PINCTRL_SM6375=y
 CONFIG_PINCTRL_SM8150=y
 CONFIG_PINCTRL_SM8250=y
 CONFIG_PINCTRL_SM8250_LPASS_LPI=m
 CONFIG_PINCTRL_SM8350=y
 CONFIG_PINCTRL_SM8450=y
+CONFIG_PINCTRL_SM8450_LPASS_LPI=m
+CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m
 CONFIG_PINCTRL_SM8550=y
+CONFIG_PINCTRL_SM8550_LPASS_LPI=m
 CONFIG_PINCTRL_LPASS_LPI=m
 CONFIG_GPIO_ALTERA=m
 CONFIG_GPIO_DAVINCI=y
@@ -594,6 +614,7 @@ CONFIG_POWER_RESET_QCOM_PON=m
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_NVMEM_REBOOT_MODE=m
 CONFIG_BATTERY_SBS=m
 CONFIG_BATTERY_BQ27XXX=y
 CONFIG_BATTERY_MAX17042=m
@@ -670,6 +691,8 @@ CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_SL28CPLD=y
+CONFIG_MFD_TPS65219=y
+CONFIG_MFD_TI_AM335X_TSCADC=m
 CONFIG_MFD_ROHM_BD718XX=y
 CONFIG_MFD_WCD934X=m
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -699,6 +722,7 @@ CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_REGULATOR_RK808=y
 CONFIG_REGULATOR_S2MPS11=y
 CONFIG_REGULATOR_TPS65132=m
+CONFIG_REGULATOR_TPS65219=y
 CONFIG_REGULATOR_VCTRL=m
 CONFIG_RC_CORE=m
 CONFIG_RC_DECODERS=y
@@ -871,7 +895,9 @@ CONFIG_SND_SOC_TEGRA210_AMX=m
 CONFIG_SND_SOC_TEGRA210_ADX=m
 CONFIG_SND_SOC_TEGRA210_MIXER=m
 CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m
+CONFIG_SND_SOC_DAVINCI_MCASP=m
 CONFIG_SND_SOC_AK4613=m
+CONFIG_SND_SOC_DA7213=m
 CONFIG_SND_SOC_ES7134=m
 CONFIG_SND_SOC_ES7241=m
 CONFIG_SND_SOC_GTM601=m
@@ -885,6 +911,7 @@ CONFIG_SND_SOC_SIMPLE_MUX=m
 CONFIG_SND_SOC_TAS2552=m
 CONFIG_SND_SOC_TAS571X=m
 CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
+CONFIG_SND_SOC_TLV320AIC3X_I2C=m
 CONFIG_SND_SOC_WCD9335=m
 CONFIG_SND_SOC_WCD934X=m
 CONFIG_SND_SOC_WM8524=m
@@ -908,6 +935,7 @@ CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_PCI_RENESAS=m
+CONFIG_USB_XHCI_RZV2M=y
 CONFIG_USB_XHCI_TEGRA=y
 CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y
@@ -943,6 +971,7 @@ CONFIG_USB_ONBOARD_HUB=m
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_RZV2M_USB3DRD=y
 CONFIG_USB_RENESAS_USB3=m
 CONFIG_USB_TEGRA_XUDC=m
 CONFIG_USB_CONFIGFS=m
@@ -1026,6 +1055,7 @@ CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_PCF85063=m
 CONFIG_RTC_DRV_PCF85363=m
 CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_RX8581=m
 CONFIG_RTC_DRV_RV3028=m
 CONFIG_RTC_DRV_RV8803=m
@@ -1045,6 +1075,7 @@ CONFIG_RTC_DRV_SNVS=m
 CONFIG_RTC_DRV_IMX_SC=m
 CONFIG_RTC_DRV_MT6397=m
 CONFIG_RTC_DRV_XGENE=y
+CONFIG_RTC_DRV_TI_K3=m
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_SUN6I=m
@@ -1122,11 +1153,15 @@ CONFIG_QCOM_CLK_APCS_MSM8916=y
 CONFIG_QCOM_CLK_APCC_MSM8996=y
 CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_QCOM_CLK_RPMH=y
+CONFIG_IPQ_GCC_5332=y
 CONFIG_IPQ_GCC_6018=y
 CONFIG_IPQ_GCC_8074=y
+CONFIG_IPQ_GCC_9574=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_GCC_8994=y
-CONFIG_MSM_MMCC_8996=y
+CONFIG_MSM_MMCC_8994=m
+CONFIG_MSM_MMCC_8996=m
+CONFIG_MSM_MMCC_8998=m
 CONFIG_MSM_GCC_8998=y
 CONFIG_QCS_GCC_404=y
 CONFIG_SA_GCC_8775P=y
@@ -1217,7 +1252,6 @@ CONFIG_QCOM_APR=m
 CONFIG_QCOM_ICC_BWMON=m
 CONFIG_ARCH_R8A77995=y
 CONFIG_ARCH_R8A77990=y
-CONFIG_ARCH_R8A77950=y
 CONFIG_ARCH_R8A77951=y
 CONFIG_ARCH_R8A77965=y
 CONFIG_ARCH_R8A77960=y
@@ -1252,6 +1286,7 @@ CONFIG_EXTCON_USBC_CROS_EC=y
 CONFIG_RENESAS_RPCIF=m
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
+CONFIG_IMX93_ADC=m
 CONFIG_MAX9611=m
 CONFIG_MEDIATEK_MT6577_AUXADC=m
 CONFIG_QCOM_SPMI_VADC=m
@@ -1259,6 +1294,7 @@ CONFIG_QCOM_SPMI_ADC5=m
 CONFIG_ROCKCHIP_SARADC=m
 CONFIG_RZG2L_ADC=m
 CONFIG_TI_ADS1015=m
+CONFIG_TI_AM335X_ADC=m
 CONFIG_IIO_CROS_EC_SENSORS_CORE=m
 CONFIG_IIO_CROS_EC_SENSORS=m
 CONFIG_IIO_ST_LSM6DSX=m
@@ -1292,6 +1328,7 @@ CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_RZG2L_USBPHY_CTRL=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_PHY_XGENE=y
+CONFIG_PHY_CAN_TRANSCEIVER=m
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_CADENCE_TORRENT=m
 CONFIG_PHY_CADENCE_SIERRA=m
@@ -1303,9 +1340,11 @@ CONFIG_PHY_HISI_INNO_USB2=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
 CONFIG_PHY_MTK_TPHY=y
 CONFIG_PHY_QCOM_EDP=m
+CONFIG_PHY_QCOM_EUSB2_REPEATER=m
 CONFIG_PHY_QCOM_PCIE2=m
 CONFIG_PHY_QCOM_QMP=m
 CONFIG_PHY_QCOM_QUSB2=m
+CONFIG_PHY_QCOM_SNPS_EUSB2=m
 CONFIG_PHY_QCOM_USB_HS=m
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
 CONFIG_PHY_QCOM_USB_HS_28NM=m
@@ -1329,6 +1368,7 @@ CONFIG_PHY_J721E_WIZ=m
 CONFIG_ARM_CCI_PMU=m
 CONFIG_ARM_CCN=m
 CONFIG_ARM_CMN=m
+CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m
 CONFIG_ARM_SMMU_V3_PMU=m
 CONFIG_ARM_DSU_PMU=m
 CONFIG_FSL_IMX8_DDR_PMU=m
@@ -1415,6 +1455,7 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_USER=y
+CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_ANSI_CPRNG=y
@@ -1440,6 +1481,7 @@ CONFIG_CRYPTO_DEV_HISI_SEC2=m
 CONFIG_CRYPTO_DEV_HISI_ZIP=m
 CONFIG_CRYPTO_DEV_HISI_HPRE=m
 CONFIG_CRYPTO_DEV_HISI_TRNG=m
+CONFIG_CRYPTO_DEV_SA2UL=m
 CONFIG_DMA_RESTRICTED_POOL=y
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_PRINTK_TIME=y
diff --git a/arch/arm64/configs/virt.config b/arch/arm64/configs/virt.config
index 6ef0a739717f..6865d54e68f8 100644
--- a/arch/arm64/configs/virt.config
+++ b/arch/arm64/configs/virt.config
@@ -1,3 +1,7 @@
+#
+# Base options for platforms
+#
+
 # CONFIG_ARCH_ACTIONS is not set
 # CONFIG_ARCH_SUNXI is not set
 # CONFIG_ARCH_ALPINE is not set
@@ -37,3 +41,20 @@
 # CONFIG_ARCH_VISCONTI is not set
 # CONFIG_ARCH_XGENE is not set
 # CONFIG_ARCH_ZYNQMP is not set
+
+#
+# Subsystems which can't be used in mach-virt
+#
+# CONFIG_CHROME_PLATFORMS is not set
+# CONFIG_EXTCON is not set
+# CONFIG_IIO is not set
+# CONFIG_MTD is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_PWM is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_SLIMBUS is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUNDWIRE is not set
+# CONFIG_SPI is not set
+# CONFIG_SURFACE_PLATFORMS is not set
+# CONFIG_THERMAL is not set
diff --git a/arch/arm64/crypto/aes-neonbs-core.S b/arch/arm64/crypto/aes-neonbs-core.S
index 7278a37c2d5c..baf450717b24 100644
--- a/arch/arm64/crypto/aes-neonbs-core.S
+++ b/arch/arm64/crypto/aes-neonbs-core.S
@@ -15,6 +15,7 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 
 	.text
@@ -620,12 +621,12 @@ SYM_FUNC_END(aesbs_decrypt8)
 	.endm
 
 	.align		4
-SYM_FUNC_START(aesbs_ecb_encrypt)
+SYM_TYPED_FUNC_START(aesbs_ecb_encrypt)
 	__ecb_crypt	aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5
 SYM_FUNC_END(aesbs_ecb_encrypt)
 
 	.align		4
-SYM_FUNC_START(aesbs_ecb_decrypt)
+SYM_TYPED_FUNC_START(aesbs_ecb_decrypt)
 	__ecb_crypt	aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5
 SYM_FUNC_END(aesbs_ecb_decrypt)
 
@@ -799,11 +800,11 @@ SYM_FUNC_END(__xts_crypt8)
 	ret
 	.endm
 
-SYM_FUNC_START(aesbs_xts_encrypt)
+SYM_TYPED_FUNC_START(aesbs_xts_encrypt)
 	__xts_crypt	aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5
 SYM_FUNC_END(aesbs_xts_encrypt)
 
-SYM_FUNC_START(aesbs_xts_decrypt)
+SYM_TYPED_FUNC_START(aesbs_xts_decrypt)
 	__xts_crypt	aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5
 SYM_FUNC_END(aesbs_xts_decrypt)
 
diff --git a/arch/arm64/include/asm/arm_pmuv3.h b/arch/arm64/include/asm/arm_pmuv3.h
new file mode 100644
index 000000000000..d6b51deb7bf0
--- /dev/null
+++ b/arch/arm64/include/asm/arm_pmuv3.h
@@ -0,0 +1,155 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __ASM_PMUV3_H
+#define __ASM_PMUV3_H
+
+#include <linux/kvm_host.h>
+
+#include <asm/cpufeature.h>
+#include <asm/sysreg.h>
+
+#define RETURN_READ_PMEVCNTRN(n) \
+	return read_sysreg(pmevcntr##n##_el0)
+static unsigned long read_pmevcntrn(int n)
+{
+	PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN);
+	return 0;
+}
+
+#define WRITE_PMEVCNTRN(n) \
+	write_sysreg(val, pmevcntr##n##_el0)
+static void write_pmevcntrn(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVCNTRN);
+}
+
+#define WRITE_PMEVTYPERN(n) \
+	write_sysreg(val, pmevtyper##n##_el0)
+static void write_pmevtypern(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVTYPERN);
+}
+
+static inline unsigned long read_pmmir(void)
+{
+	return read_cpuid(PMMIR_EL1);
+}
+
+static inline u32 read_pmuver(void)
+{
+	u64 dfr0 = read_sysreg(id_aa64dfr0_el1);
+
+	return cpuid_feature_extract_unsigned_field(dfr0,
+			ID_AA64DFR0_EL1_PMUVer_SHIFT);
+}
+
+static inline void write_pmcr(u32 val)
+{
+	write_sysreg(val, pmcr_el0);
+}
+
+static inline u32 read_pmcr(void)
+{
+	return read_sysreg(pmcr_el0);
+}
+
+static inline void write_pmselr(u32 val)
+{
+	write_sysreg(val, pmselr_el0);
+}
+
+static inline void write_pmccntr(u64 val)
+{
+	write_sysreg(val, pmccntr_el0);
+}
+
+static inline u64 read_pmccntr(void)
+{
+	return read_sysreg(pmccntr_el0);
+}
+
+static inline void write_pmxevcntr(u32 val)
+{
+	write_sysreg(val, pmxevcntr_el0);
+}
+
+static inline u32 read_pmxevcntr(void)
+{
+	return read_sysreg(pmxevcntr_el0);
+}
+
+static inline void write_pmxevtyper(u32 val)
+{
+	write_sysreg(val, pmxevtyper_el0);
+}
+
+static inline void write_pmcntenset(u32 val)
+{
+	write_sysreg(val, pmcntenset_el0);
+}
+
+static inline void write_pmcntenclr(u32 val)
+{
+	write_sysreg(val, pmcntenclr_el0);
+}
+
+static inline void write_pmintenset(u32 val)
+{
+	write_sysreg(val, pmintenset_el1);
+}
+
+static inline void write_pmintenclr(u32 val)
+{
+	write_sysreg(val, pmintenclr_el1);
+}
+
+static inline void write_pmccfiltr(u32 val)
+{
+	write_sysreg(val, pmccfiltr_el0);
+}
+
+static inline void write_pmovsclr(u32 val)
+{
+	write_sysreg(val, pmovsclr_el0);
+}
+
+static inline u32 read_pmovsclr(void)
+{
+	return read_sysreg(pmovsclr_el0);
+}
+
+static inline void write_pmuserenr(u32 val)
+{
+	write_sysreg(val, pmuserenr_el0);
+}
+
+static inline u32 read_pmceid0(void)
+{
+	return read_sysreg(pmceid0_el0);
+}
+
+static inline u32 read_pmceid1(void)
+{
+	return read_sysreg(pmceid1_el0);
+}
+
+static inline bool pmuv3_implemented(int pmuver)
+{
+	return !(pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF ||
+		 pmuver == ID_AA64DFR0_EL1_PMUVer_NI);
+}
+
+static inline bool is_pmuv3p4(int pmuver)
+{
+	return pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P4;
+}
+
+static inline bool is_pmuv3p5(int pmuver)
+{
+	return pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P5;
+}
+
+#endif
diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h
index a94d6dacc029..319958b95cfd 100644
--- a/arch/arm64/include/asm/atomic_lse.h
+++ b/arch/arm64/include/asm/atomic_lse.h
@@ -251,22 +251,15 @@ __lse__cmpxchg_case_##name##sz(volatile void *ptr,			\
 					      u##sz old,		\
 					      u##sz new)		\
 {									\
-	register unsigned long x0 asm ("x0") = (unsigned long)ptr;	\
-	register u##sz x1 asm ("x1") = old;				\
-	register u##sz x2 asm ("x2") = new;				\
-	unsigned long tmp;						\
-									\
 	asm volatile(							\
 	__LSE_PREAMBLE							\
-	"	mov	%" #w "[tmp], %" #w "[old]\n"			\
-	"	cas" #mb #sfx "\t%" #w "[tmp], %" #w "[new], %[v]\n"	\
-	"	mov	%" #w "[ret], %" #w "[tmp]"			\
-	: [ret] "+r" (x0), [v] "+Q" (*(u##sz *)ptr),			\
-	  [tmp] "=&r" (tmp)						\
-	: [old] "r" (x1), [new] "r" (x2)				\
+	"	cas" #mb #sfx "	%" #w "[old], %" #w "[new], %[v]\n"	\
+	: [v] "+Q" (*(u##sz *)ptr),					\
+	  [old] "+r" (old)						\
+	: [new] "rZ" (new)						\
 	: cl);								\
 									\
-	return x0;							\
+	return old;							\
 }
 
 __CMPXCHG_CASE(w, b,     ,  8,   )
diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h
index 3dd8982a9ce3..cf2987464c18 100644
--- a/arch/arm64/include/asm/barrier.h
+++ b/arch/arm64/include/asm/barrier.h
@@ -131,25 +131,25 @@ do {									\
 	case 1:								\
 		asm volatile ("stlrb %w1, %0"				\
 				: "=Q" (*__p)				\
-				: "r" (*(__u8 *)__u.__c)		\
+				: "rZ" (*(__u8 *)__u.__c)		\
 				: "memory");				\
 		break;							\
 	case 2:								\
 		asm volatile ("stlrh %w1, %0"				\
 				: "=Q" (*__p)				\
-				: "r" (*(__u16 *)__u.__c)		\
+				: "rZ" (*(__u16 *)__u.__c)		\
 				: "memory");				\
 		break;							\
 	case 4:								\
 		asm volatile ("stlr %w1, %0"				\
 				: "=Q" (*__p)				\
-				: "r" (*(__u32 *)__u.__c)		\
+				: "rZ" (*(__u32 *)__u.__c)		\
 				: "memory");				\
 		break;							\
 	case 8:								\
-		asm volatile ("stlr %1, %0"				\
+		asm volatile ("stlr %x1, %0"				\
 				: "=Q" (*__p)				\
-				: "r" (*(__u64 *)__u.__c)		\
+				: "rZ" (*(__u64 *)__u.__c)		\
 				: "memory");				\
 		break;							\
 	}								\
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index 9f362274a4f7..74575c3d6987 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -83,10 +83,6 @@ struct compat_statfs {
 	int		f_spare[4];
 };
 
-#define COMPAT_RLIM_INFINITY		0xffffffff
-
-#define COMPAT_OFF_T_MAX	0x7fffffff
-
 #define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current)))
 #define COMPAT_MINSIGSTKSZ	2048
 
diff --git a/arch/arm64/include/asm/compiler.h b/arch/arm64/include/asm/compiler.h
index 6fb2e6bcc392..9bbd7b7097ff 100644
--- a/arch/arm64/include/asm/compiler.h
+++ b/arch/arm64/include/asm/compiler.h
@@ -8,19 +8,33 @@
 #define ARM64_ASM_PREAMBLE
 #endif
 
-/*
- * The EL0/EL1 pointer bits used by a pointer authentication code.
- * This is dependent on TBI0/TBI1 being enabled, or bits 63:56 would also apply.
- */
-#define ptrauth_user_pac_mask()		GENMASK_ULL(54, vabits_actual)
-#define ptrauth_kernel_pac_mask()	GENMASK_ULL(63, vabits_actual)
+#define xpaclri(ptr)							\
+({									\
+	register unsigned long __xpaclri_ptr asm("x30") = (ptr);	\
+									\
+	asm(								\
+	ARM64_ASM_PREAMBLE						\
+	"	hint	#7\n"						\
+	: "+r" (__xpaclri_ptr));					\
+									\
+	__xpaclri_ptr;							\
+})
 
-/* Valid for EL0 TTBR0 and EL1 TTBR1 instruction pointers */
-#define ptrauth_clear_pac(ptr)						\
-	((ptr & BIT_ULL(55)) ? (ptr | ptrauth_kernel_pac_mask()) :	\
-			       (ptr & ~ptrauth_user_pac_mask()))
+#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
+#define ptrauth_strip_kernel_insn_pac(ptr)	xpaclri(ptr)
+#else
+#define ptrauth_strip_kernel_insn_pac(ptr)	(ptr)
+#endif
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+#define ptrauth_strip_user_insn_pac(ptr)	xpaclri(ptr)
+#else
+#define ptrauth_strip_user_insn_pac(ptr)	(ptr)
+#endif
 
+#if !defined(CONFIG_BUILTIN_RETURN_ADDRESS_STRIPS_PAC)
 #define __builtin_return_address(val)					\
-	(void *)(ptrauth_clear_pac((unsigned long)__builtin_return_address(val)))
+	(void *)(ptrauth_strip_kernel_insn_pac((unsigned long)__builtin_return_address(val)))
+#endif
 
 #endif /* __ASM_COMPILER_H */
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index 7b7e05c02691..13d437bcbf58 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -104,6 +104,7 @@ void user_regs_reset_single_step(struct user_pt_regs *regs,
 void kernel_enable_single_step(struct pt_regs *regs);
 void kernel_disable_single_step(void);
 int kernel_active_single_step(void);
+void kernel_rewind_single_step(struct pt_regs *regs);
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 int reinstall_suspended_bps(struct pt_regs *regs);
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
index 92963f98afec..e73af709cb7a 100644
--- a/arch/arm64/include/asm/exception.h
+++ b/arch/arm64/include/asm/exception.h
@@ -31,7 +31,7 @@ static inline unsigned long disr_to_esr(u64 disr)
 	return esr;
 }
 
-asmlinkage void handle_bad_stack(struct pt_regs *regs);
+asmlinkage void __noreturn handle_bad_stack(struct pt_regs *regs);
 
 asmlinkage void el1t_64_sync_handler(struct pt_regs *regs);
 asmlinkage void el1t_64_irq_handler(struct pt_regs *regs);
@@ -80,5 +80,5 @@ void do_el1_fpac(struct pt_regs *regs, unsigned long esr);
 void do_serror(struct pt_regs *regs, unsigned long esr);
 void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags);
 
-void panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far);
+void __noreturn panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far);
 #endif	/* __ASM_EXCEPTION_H */
diff --git a/arch/arm64/include/asm/fixmap.h b/arch/arm64/include/asm/fixmap.h
index 71ed5fdf718b..58c294a96676 100644
--- a/arch/arm64/include/asm/fixmap.h
+++ b/arch/arm64/include/asm/fixmap.h
@@ -17,6 +17,7 @@
 
 #ifndef __ASSEMBLY__
 #include <linux/kernel.h>
+#include <linux/math.h>
 #include <linux/sizes.h>
 #include <asm/boot.h>
 #include <asm/page.h>
@@ -36,17 +37,13 @@ enum fixed_addresses {
 	FIX_HOLE,
 
 	/*
-	 * Reserve a virtual window for the FDT that is 2 MB larger than the
-	 * maximum supported size, and put it at the top of the fixmap region.
-	 * The additional space ensures that any FDT that does not exceed
-	 * MAX_FDT_SIZE can be mapped regardless of whether it crosses any
-	 * 2 MB alignment boundaries.
-	 *
-	 * Keep this at the top so it remains 2 MB aligned.
+	 * Reserve a virtual window for the FDT that is a page bigger than the
+	 * maximum supported size. The additional space ensures that any FDT
+	 * that does not exceed MAX_FDT_SIZE can be mapped regardless of
+	 * whether it crosses any page boundary.
 	 */
-#define FIX_FDT_SIZE		(MAX_FDT_SIZE + SZ_2M)
 	FIX_FDT_END,
-	FIX_FDT = FIX_FDT_END + FIX_FDT_SIZE / PAGE_SIZE - 1,
+	FIX_FDT = FIX_FDT_END + DIV_ROUND_UP(MAX_FDT_SIZE, PAGE_SIZE) + 1,
 
 	FIX_EARLYCON_MEM_BASE,
 	FIX_TEXT_POKE0,
@@ -95,12 +92,15 @@ enum fixed_addresses {
 	__end_of_fixed_addresses
 };
 
-#define FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+#define FIXADDR_SIZE		(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
+#define FIXADDR_TOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_TOT_START	(FIXADDR_TOP - FIXADDR_TOT_SIZE)
 
 #define FIXMAP_PAGE_IO     __pgprot(PROT_DEVICE_nGnRE)
 
 void __init early_fixmap_init(void);
+void __init fixmap_copy(pgd_t *pgdir);
 
 #define __early_set_fixmap __set_fixmap
 
diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h
index 1c2672bbbf37..b87d70b693c6 100644
--- a/arch/arm64/include/asm/ftrace.h
+++ b/arch/arm64/include/asm/ftrace.h
@@ -70,10 +70,19 @@ struct ftrace_ops;
 
 #define arch_ftrace_get_regs(regs) NULL
 
+/*
+ * Note: sizeof(struct ftrace_regs) must be a multiple of 16 to ensure correct
+ * stack alignment
+ */
 struct ftrace_regs {
 	/* x0 - x8 */
 	unsigned long regs[9];
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	unsigned long direct_tramp;
+#else
 	unsigned long __unused;
+#endif
 
 	unsigned long fp;
 	unsigned long lr;
@@ -136,6 +145,19 @@ int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
 void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
 		       struct ftrace_ops *op, struct ftrace_regs *fregs);
 #define ftrace_graph_func ftrace_graph_func
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+static inline void arch_ftrace_set_direct_caller(struct ftrace_regs *fregs,
+						 unsigned long addr)
+{
+	/*
+	 * The ftrace trampoline will return to this address instead of the
+	 * instrumented function.
+	 */
+	fregs->direct_tramp = addr;
+}
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
+
 #endif
 
 #define ftrace_return_address(n) return_address(n)
diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h
index fcd14197756f..186dd7f85b14 100644
--- a/arch/arm64/include/asm/kernel-pgtable.h
+++ b/arch/arm64/include/asm/kernel-pgtable.h
@@ -59,8 +59,11 @@
 #define EARLY_KASLR	(0)
 #endif
 
+#define SPAN_NR_ENTRIES(vstart, vend, shift) \
+	((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1)
+
 #define EARLY_ENTRIES(vstart, vend, shift, add) \
-	((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1 + add)
+	(SPAN_NR_ENTRIES(vstart, vend, shift) + (add))
 
 #define EARLY_PGDS(vstart, vend, add) (EARLY_ENTRIES(vstart, vend, PGDIR_SHIFT, add))
 
diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h
index 559bfae26715..9ac9572a3bbe 100644
--- a/arch/arm64/include/asm/kexec.h
+++ b/arch/arm64/include/asm/kexec.h
@@ -102,12 +102,6 @@ void cpu_soft_restart(unsigned long el2_switch, unsigned long entry,
 
 int machine_kexec_post_load(struct kimage *image);
 #define machine_kexec_post_load machine_kexec_post_load
-
-void arch_kexec_protect_crashkres(void);
-#define arch_kexec_protect_crashkres arch_kexec_protect_crashkres
-
-void arch_kexec_unprotect_crashkres(void);
-#define arch_kexec_unprotect_crashkres arch_kexec_unprotect_crashkres
 #endif
 
 #define ARCH_HAS_KIMAGE_ARCH
diff --git a/arch/arm64/include/asm/kfence.h b/arch/arm64/include/asm/kfence.h
index aa855c6a0ae6..a81937fae9f6 100644
--- a/arch/arm64/include/asm/kfence.h
+++ b/arch/arm64/include/asm/kfence.h
@@ -19,4 +19,14 @@ static inline bool kfence_protect_page(unsigned long addr, bool protect)
 	return true;
 }
 
+#ifdef CONFIG_KFENCE
+extern bool kfence_early_init;
+static inline bool arm64_kfence_can_set_direct_map(void)
+{
+	return !kfence_early_init;
+}
+#else /* CONFIG_KFENCE */
+static inline bool arm64_kfence_can_set_direct_map(void) { return false; }
+#endif /* CONFIG_KFENCE */
+
 #endif /* __ASM_KFENCE_H */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index bcd774d74f34..3dd691c85ca0 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -576,9 +576,22 @@ struct kvm_vcpu_arch {
 	({							\
 		__build_check_flag(v, flagset, f, m);		\
 								\
-		v->arch.flagset & (m);				\
+		READ_ONCE(v->arch.flagset) & (m);		\
 	})
 
+/*
+ * Note that the set/clear accessors must be preempt-safe in order to
+ * avoid nesting them with load/put which also manipulate flags...
+ */
+#ifdef __KVM_NVHE_HYPERVISOR__
+/* the nVHE hypervisor is always non-preemptible */
+#define __vcpu_flags_preempt_disable()
+#define __vcpu_flags_preempt_enable()
+#else
+#define __vcpu_flags_preempt_disable()	preempt_disable()
+#define __vcpu_flags_preempt_enable()	preempt_enable()
+#endif
+
 #define __vcpu_set_flag(v, flagset, f, m)			\
 	do {							\
 		typeof(v->arch.flagset) *fset;			\
@@ -586,9 +599,11 @@ struct kvm_vcpu_arch {
 		__build_check_flag(v, flagset, f, m);		\
 								\
 		fset = &v->arch.flagset;			\
+		__vcpu_flags_preempt_disable();			\
 		if (HWEIGHT(m) > 1)				\
 			*fset &= ~(m);				\
 		*fset |= (f);					\
+		__vcpu_flags_preempt_enable();			\
 	} while (0)
 
 #define __vcpu_clear_flag(v, flagset, f, m)			\
@@ -598,7 +613,9 @@ struct kvm_vcpu_arch {
 		__build_check_flag(v, flagset, f, m);		\
 								\
 		fset = &v->arch.flagset;			\
+		__vcpu_flags_preempt_disable();			\
 		*fset &= ~(m);					\
+		__vcpu_flags_preempt_enable();			\
 	} while (0)
 
 #define vcpu_get_flag(v, ...)	__vcpu_get_flag((v), __VA_ARGS__)
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 78e5163836a0..c735afdf639b 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -261,9 +261,11 @@ static inline const void *__tag_set(const void *addr, u8 tag)
 }
 
 #ifdef CONFIG_KASAN_HW_TAGS
-#define arch_enable_tagging_sync()		mte_enable_kernel_sync()
-#define arch_enable_tagging_async()		mte_enable_kernel_async()
-#define arch_enable_tagging_asymm()		mte_enable_kernel_asymm()
+#define arch_enable_tag_checks_sync()		mte_enable_kernel_sync()
+#define arch_enable_tag_checks_async()		mte_enable_kernel_async()
+#define arch_enable_tag_checks_asymm()		mte_enable_kernel_asymm()
+#define arch_suppress_tag_checks_start()	mte_enable_tco()
+#define arch_suppress_tag_checks_stop()		mte_disable_tco()
 #define arch_force_async_tag_fault()		mte_check_tfsr_exit()
 #define arch_get_random_tag()			mte_get_random_tag()
 #define arch_get_mem_tag(addr)			mte_get_mem_tag(addr)
@@ -374,11 +376,6 @@ static inline void *phys_to_virt(phys_addr_t x)
 })
 
 void dump_mem_limit(void);
-
-static inline bool defer_reserve_crashkernel(void)
-{
-	return IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32);
-}
 #endif /* !ASSEMBLY */
 
 /*
diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h
index 48f8466a4be9..4384eaa0aeb7 100644
--- a/arch/arm64/include/asm/mmu.h
+++ b/arch/arm64/include/asm/mmu.h
@@ -65,6 +65,8 @@ extern void paging_init(void);
 extern void bootmem_init(void);
 extern void __iomem *early_io_map(phys_addr_t phys, unsigned long virt);
 extern void init_mem_pgprot(void);
+extern void create_mapping_noalloc(phys_addr_t phys, unsigned long virt,
+				   phys_addr_t size, pgprot_t prot);
 extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
 			       unsigned long virt, phys_addr_t size,
 			       pgprot_t prot, bool page_mappings_only);
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index 72dbd6400549..56911691bef0 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -288,6 +288,12 @@ void post_ttbr_update_workaround(void);
 unsigned long arm64_mm_context_get(struct mm_struct *mm);
 void arm64_mm_context_put(struct mm_struct *mm);
 
+#define mm_untag_mask mm_untag_mask
+static inline unsigned long mm_untag_mask(struct mm_struct *mm)
+{
+	return -1UL >> 8;
+}
+
 #include <asm-generic/mmu_context.h>
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/arm64/include/asm/mte-kasan.h b/arch/arm64/include/asm/mte-kasan.h
index 9f79425fc65a..2e98028c1965 100644
--- a/arch/arm64/include/asm/mte-kasan.h
+++ b/arch/arm64/include/asm/mte-kasan.h
@@ -13,9 +13,74 @@
 
 #include <linux/types.h>
 
+#ifdef CONFIG_KASAN_HW_TAGS
+
+/* Whether the MTE asynchronous mode is enabled. */
+DECLARE_STATIC_KEY_FALSE(mte_async_or_asymm_mode);
+
+static inline bool system_uses_mte_async_or_asymm_mode(void)
+{
+	return static_branch_unlikely(&mte_async_or_asymm_mode);
+}
+
+#else /* CONFIG_KASAN_HW_TAGS */
+
+static inline bool system_uses_mte_async_or_asymm_mode(void)
+{
+	return false;
+}
+
+#endif /* CONFIG_KASAN_HW_TAGS */
+
 #ifdef CONFIG_ARM64_MTE
 
 /*
+ * The Tag Check Flag (TCF) mode for MTE is per EL, hence TCF0
+ * affects EL0 and TCF affects EL1 irrespective of which TTBR is
+ * used.
+ * The kernel accesses TTBR0 usually with LDTR/STTR instructions
+ * when UAO is available, so these would act as EL0 accesses using
+ * TCF0.
+ * However futex.h code uses exclusives which would be executed as
+ * EL1, this can potentially cause a tag check fault even if the
+ * user disables TCF0.
+ *
+ * To address the problem we set the PSTATE.TCO bit in uaccess_enable()
+ * and reset it in uaccess_disable().
+ *
+ * The Tag check override (TCO) bit disables temporarily the tag checking
+ * preventing the issue.
+ */
+static inline void mte_disable_tco(void)
+{
+	asm volatile(ALTERNATIVE("nop", SET_PSTATE_TCO(0),
+				 ARM64_MTE, CONFIG_KASAN_HW_TAGS));
+}
+
+static inline void mte_enable_tco(void)
+{
+	asm volatile(ALTERNATIVE("nop", SET_PSTATE_TCO(1),
+				 ARM64_MTE, CONFIG_KASAN_HW_TAGS));
+}
+
+/*
+ * These functions disable tag checking only if in MTE async mode
+ * since the sync mode generates exceptions synchronously and the
+ * nofault or load_unaligned_zeropad can handle them.
+ */
+static inline void __mte_disable_tco_async(void)
+{
+	if (system_uses_mte_async_or_asymm_mode())
+		mte_disable_tco();
+}
+
+static inline void __mte_enable_tco_async(void)
+{
+	if (system_uses_mte_async_or_asymm_mode())
+		mte_enable_tco();
+}
+
+/*
  * These functions are meant to be only used from KASAN runtime through
  * the arch_*() interface defined in asm/memory.h.
  * These functions don't include system_supports_mte() checks,
@@ -138,6 +203,22 @@ void mte_enable_kernel_asymm(void);
 
 #else /* CONFIG_ARM64_MTE */
 
+static inline void mte_disable_tco(void)
+{
+}
+
+static inline void mte_enable_tco(void)
+{
+}
+
+static inline void __mte_disable_tco_async(void)
+{
+}
+
+static inline void __mte_enable_tco_async(void)
+{
+}
+
 static inline u8 mte_get_ptr_tag(void *ptr)
 {
 	return 0xFF;
diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h
index 20dd06d70af5..c028afb1cd0b 100644
--- a/arch/arm64/include/asm/mte.h
+++ b/arch/arm64/include/asm/mte.h
@@ -178,14 +178,6 @@ static inline void mte_disable_tco_entry(struct task_struct *task)
 }
 
 #ifdef CONFIG_KASAN_HW_TAGS
-/* Whether the MTE asynchronous mode is enabled. */
-DECLARE_STATIC_KEY_FALSE(mte_async_or_asymm_mode);
-
-static inline bool system_uses_mte_async_or_asymm_mode(void)
-{
-	return static_branch_unlikely(&mte_async_or_asymm_mode);
-}
-
 void mte_check_tfsr_el1(void);
 
 static inline void mte_check_tfsr_entry(void)
@@ -212,10 +204,6 @@ static inline void mte_check_tfsr_exit(void)
 	mte_check_tfsr_el1();
 }
 #else
-static inline bool system_uses_mte_async_or_asymm_mode(void)
-{
-	return false;
-}
 static inline void mte_check_tfsr_el1(void)
 {
 }
diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
index 3eaf462f5752..eb7071c9eb34 100644
--- a/arch/arm64/include/asm/perf_event.h
+++ b/arch/arm64/include/asm/perf_event.h
@@ -9,255 +9,6 @@
 #include <asm/stack_pointer.h>
 #include <asm/ptrace.h>
 
-#define	ARMV8_PMU_MAX_COUNTERS	32
-#define	ARMV8_PMU_COUNTER_MASK	(ARMV8_PMU_MAX_COUNTERS - 1)
-
-/*
- * Common architectural and microarchitectural event numbers.
- */
-#define ARMV8_PMUV3_PERFCTR_SW_INCR				0x0000
-#define ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL			0x0001
-#define ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL			0x0002
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL			0x0003
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE				0x0004
-#define ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL			0x0005
-#define ARMV8_PMUV3_PERFCTR_LD_RETIRED				0x0006
-#define ARMV8_PMUV3_PERFCTR_ST_RETIRED				0x0007
-#define ARMV8_PMUV3_PERFCTR_INST_RETIRED			0x0008
-#define ARMV8_PMUV3_PERFCTR_EXC_TAKEN				0x0009
-#define ARMV8_PMUV3_PERFCTR_EXC_RETURN				0x000A
-#define ARMV8_PMUV3_PERFCTR_CID_WRITE_RETIRED			0x000B
-#define ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED			0x000C
-#define ARMV8_PMUV3_PERFCTR_BR_IMMED_RETIRED			0x000D
-#define ARMV8_PMUV3_PERFCTR_BR_RETURN_RETIRED			0x000E
-#define ARMV8_PMUV3_PERFCTR_UNALIGNED_LDST_RETIRED		0x000F
-#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED				0x0010
-#define ARMV8_PMUV3_PERFCTR_CPU_CYCLES				0x0011
-#define ARMV8_PMUV3_PERFCTR_BR_PRED				0x0012
-#define ARMV8_PMUV3_PERFCTR_MEM_ACCESS				0x0013
-#define ARMV8_PMUV3_PERFCTR_L1I_CACHE				0x0014
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_WB			0x0015
-#define ARMV8_PMUV3_PERFCTR_L2D_CACHE				0x0016
-#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_REFILL			0x0017
-#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_WB			0x0018
-#define ARMV8_PMUV3_PERFCTR_BUS_ACCESS				0x0019
-#define ARMV8_PMUV3_PERFCTR_MEMORY_ERROR			0x001A
-#define ARMV8_PMUV3_PERFCTR_INST_SPEC				0x001B
-#define ARMV8_PMUV3_PERFCTR_TTBR_WRITE_RETIRED			0x001C
-#define ARMV8_PMUV3_PERFCTR_BUS_CYCLES				0x001D
-#define ARMV8_PMUV3_PERFCTR_CHAIN				0x001E
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_ALLOCATE			0x001F
-#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_ALLOCATE			0x0020
-#define ARMV8_PMUV3_PERFCTR_BR_RETIRED				0x0021
-#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED_RETIRED			0x0022
-#define ARMV8_PMUV3_PERFCTR_STALL_FRONTEND			0x0023
-#define ARMV8_PMUV3_PERFCTR_STALL_BACKEND			0x0024
-#define ARMV8_PMUV3_PERFCTR_L1D_TLB				0x0025
-#define ARMV8_PMUV3_PERFCTR_L1I_TLB				0x0026
-#define ARMV8_PMUV3_PERFCTR_L2I_CACHE				0x0027
-#define ARMV8_PMUV3_PERFCTR_L2I_CACHE_REFILL			0x0028
-#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_ALLOCATE			0x0029
-#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_REFILL			0x002A
-#define ARMV8_PMUV3_PERFCTR_L3D_CACHE				0x002B
-#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_WB			0x002C
-#define ARMV8_PMUV3_PERFCTR_L2D_TLB_REFILL			0x002D
-#define ARMV8_PMUV3_PERFCTR_L2I_TLB_REFILL			0x002E
-#define ARMV8_PMUV3_PERFCTR_L2D_TLB				0x002F
-#define ARMV8_PMUV3_PERFCTR_L2I_TLB				0x0030
-#define ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS			0x0031
-#define ARMV8_PMUV3_PERFCTR_LL_CACHE				0x0032
-#define ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS			0x0033
-#define ARMV8_PMUV3_PERFCTR_DTLB_WALK				0x0034
-#define ARMV8_PMUV3_PERFCTR_ITLB_WALK				0x0035
-#define ARMV8_PMUV3_PERFCTR_LL_CACHE_RD				0x0036
-#define ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD			0x0037
-#define ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS_RD			0x0038
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_LMISS_RD			0x0039
-#define ARMV8_PMUV3_PERFCTR_OP_RETIRED				0x003A
-#define ARMV8_PMUV3_PERFCTR_OP_SPEC				0x003B
-#define ARMV8_PMUV3_PERFCTR_STALL				0x003C
-#define ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND			0x003D
-#define ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND			0x003E
-#define ARMV8_PMUV3_PERFCTR_STALL_SLOT				0x003F
-
-/* Statistical profiling extension microarchitectural events */
-#define	ARMV8_SPE_PERFCTR_SAMPLE_POP				0x4000
-#define	ARMV8_SPE_PERFCTR_SAMPLE_FEED				0x4001
-#define	ARMV8_SPE_PERFCTR_SAMPLE_FILTRATE			0x4002
-#define	ARMV8_SPE_PERFCTR_SAMPLE_COLLISION			0x4003
-
-/* AMUv1 architecture events */
-#define	ARMV8_AMU_PERFCTR_CNT_CYCLES				0x4004
-#define	ARMV8_AMU_PERFCTR_STALL_BACKEND_MEM			0x4005
-
-/* long-latency read miss events */
-#define	ARMV8_PMUV3_PERFCTR_L1I_CACHE_LMISS			0x4006
-#define	ARMV8_PMUV3_PERFCTR_L2D_CACHE_LMISS_RD			0x4009
-#define	ARMV8_PMUV3_PERFCTR_L2I_CACHE_LMISS			0x400A
-#define	ARMV8_PMUV3_PERFCTR_L3D_CACHE_LMISS_RD			0x400B
-
-/* Trace buffer events */
-#define ARMV8_PMUV3_PERFCTR_TRB_WRAP				0x400C
-#define ARMV8_PMUV3_PERFCTR_TRB_TRIG				0x400E
-
-/* Trace unit events */
-#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT0				0x4010
-#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT1				0x4011
-#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT2				0x4012
-#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT3				0x4013
-#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT4			0x4018
-#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT5			0x4019
-#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT6			0x401A
-#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT7			0x401B
-
-/* additional latency from alignment events */
-#define	ARMV8_PMUV3_PERFCTR_LDST_ALIGN_LAT			0x4020
-#define	ARMV8_PMUV3_PERFCTR_LD_ALIGN_LAT			0x4021
-#define	ARMV8_PMUV3_PERFCTR_ST_ALIGN_LAT			0x4022
-
-/* Armv8.5 Memory Tagging Extension events */
-#define	ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED			0x4024
-#define	ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_RD			0x4025
-#define	ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_WR			0x4026
-
-/* ARMv8 recommended implementation defined event types */
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD			0x0040
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR			0x0041
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_RD		0x0042
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_WR		0x0043
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_INNER		0x0044
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_OUTER		0x0045
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WB_VICTIM		0x0046
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WB_CLEAN			0x0047
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_INVAL			0x0048
-
-#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_RD			0x004C
-#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_WR			0x004D
-#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_RD				0x004E
-#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_WR				0x004F
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_RD			0x0050
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WR			0x0051
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_REFILL_RD		0x0052
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_REFILL_WR		0x0053
-
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WB_VICTIM		0x0056
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WB_CLEAN			0x0057
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_INVAL			0x0058
-
-#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_REFILL_RD			0x005C
-#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_REFILL_WR			0x005D
-#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_RD				0x005E
-#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_WR				0x005F
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_RD			0x0060
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_WR			0x0061
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_SHARED			0x0062
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_NOT_SHARED		0x0063
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_NORMAL			0x0064
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_PERIPH			0x0065
-#define ARMV8_IMPDEF_PERFCTR_MEM_ACCESS_RD			0x0066
-#define ARMV8_IMPDEF_PERFCTR_MEM_ACCESS_WR			0x0067
-#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_LD_SPEC			0x0068
-#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_ST_SPEC			0x0069
-#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_LDST_SPEC		0x006A
-
-#define ARMV8_IMPDEF_PERFCTR_LDREX_SPEC				0x006C
-#define ARMV8_IMPDEF_PERFCTR_STREX_PASS_SPEC			0x006D
-#define ARMV8_IMPDEF_PERFCTR_STREX_FAIL_SPEC			0x006E
-#define ARMV8_IMPDEF_PERFCTR_STREX_SPEC				0x006F
-#define ARMV8_IMPDEF_PERFCTR_LD_SPEC				0x0070
-#define ARMV8_IMPDEF_PERFCTR_ST_SPEC				0x0071
-#define ARMV8_IMPDEF_PERFCTR_LDST_SPEC				0x0072
-#define ARMV8_IMPDEF_PERFCTR_DP_SPEC				0x0073
-#define ARMV8_IMPDEF_PERFCTR_ASE_SPEC				0x0074
-#define ARMV8_IMPDEF_PERFCTR_VFP_SPEC				0x0075
-#define ARMV8_IMPDEF_PERFCTR_PC_WRITE_SPEC			0x0076
-#define ARMV8_IMPDEF_PERFCTR_CRYPTO_SPEC			0x0077
-#define ARMV8_IMPDEF_PERFCTR_BR_IMMED_SPEC			0x0078
-#define ARMV8_IMPDEF_PERFCTR_BR_RETURN_SPEC			0x0079
-#define ARMV8_IMPDEF_PERFCTR_BR_INDIRECT_SPEC			0x007A
-
-#define ARMV8_IMPDEF_PERFCTR_ISB_SPEC				0x007C
-#define ARMV8_IMPDEF_PERFCTR_DSB_SPEC				0x007D
-#define ARMV8_IMPDEF_PERFCTR_DMB_SPEC				0x007E
-
-#define ARMV8_IMPDEF_PERFCTR_EXC_UNDEF				0x0081
-#define ARMV8_IMPDEF_PERFCTR_EXC_SVC				0x0082
-#define ARMV8_IMPDEF_PERFCTR_EXC_PABORT				0x0083
-#define ARMV8_IMPDEF_PERFCTR_EXC_DABORT				0x0084
-
-#define ARMV8_IMPDEF_PERFCTR_EXC_IRQ				0x0086
-#define ARMV8_IMPDEF_PERFCTR_EXC_FIQ				0x0087
-#define ARMV8_IMPDEF_PERFCTR_EXC_SMC				0x0088
-
-#define ARMV8_IMPDEF_PERFCTR_EXC_HVC				0x008A
-#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_PABORT			0x008B
-#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_DABORT			0x008C
-#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_OTHER			0x008D
-#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_IRQ			0x008E
-#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_FIQ			0x008F
-#define ARMV8_IMPDEF_PERFCTR_RC_LD_SPEC				0x0090
-#define ARMV8_IMPDEF_PERFCTR_RC_ST_SPEC				0x0091
-
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_RD			0x00A0
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WR			0x00A1
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_REFILL_RD		0x00A2
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_REFILL_WR		0x00A3
-
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WB_VICTIM		0x00A6
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WB_CLEAN			0x00A7
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_INVAL			0x00A8
-
-/*
- * Per-CPU PMCR: config reg
- */
-#define ARMV8_PMU_PMCR_E	(1 << 0) /* Enable all counters */
-#define ARMV8_PMU_PMCR_P	(1 << 1) /* Reset all counters */
-#define ARMV8_PMU_PMCR_C	(1 << 2) /* Cycle counter reset */
-#define ARMV8_PMU_PMCR_D	(1 << 3) /* CCNT counts every 64th cpu cycle */
-#define ARMV8_PMU_PMCR_X	(1 << 4) /* Export to ETM */
-#define ARMV8_PMU_PMCR_DP	(1 << 5) /* Disable CCNT if non-invasive debug*/
-#define ARMV8_PMU_PMCR_LC	(1 << 6) /* Overflow on 64 bit cycle counter */
-#define ARMV8_PMU_PMCR_LP	(1 << 7) /* Long event counter enable */
-#define	ARMV8_PMU_PMCR_N_SHIFT	11	 /* Number of counters supported */
-#define	ARMV8_PMU_PMCR_N_MASK	0x1f
-#define	ARMV8_PMU_PMCR_MASK	0xff	 /* Mask for writable bits */
-
-/*
- * PMOVSR: counters overflow flag status reg
- */
-#define	ARMV8_PMU_OVSR_MASK		0xffffffff	/* Mask for writable bits */
-#define	ARMV8_PMU_OVERFLOWED_MASK	ARMV8_PMU_OVSR_MASK
-
-/*
- * PMXEVTYPER: Event selection reg
- */
-#define	ARMV8_PMU_EVTYPE_MASK	0xc800ffff	/* Mask for writable bits */
-#define	ARMV8_PMU_EVTYPE_EVENT	0xffff		/* Mask for EVENT bits */
-
-/*
- * Event filters for PMUv3
- */
-#define	ARMV8_PMU_EXCLUDE_EL1	(1U << 31)
-#define	ARMV8_PMU_EXCLUDE_EL0	(1U << 30)
-#define	ARMV8_PMU_INCLUDE_EL2	(1U << 27)
-
-/*
- * PMUSERENR: user enable reg
- */
-#define ARMV8_PMU_USERENR_MASK	0xf		/* Mask for writable bits */
-#define ARMV8_PMU_USERENR_EN	(1 << 0) /* PMU regs can be accessed at EL0 */
-#define ARMV8_PMU_USERENR_SW	(1 << 1) /* PMSWINC can be written at EL0 */
-#define ARMV8_PMU_USERENR_CR	(1 << 2) /* Cycle counter can be read at EL0 */
-#define ARMV8_PMU_USERENR_ER	(1 << 3) /* Event counter can be read at EL0 */
-
-/* PMMIR_EL1.SLOTS mask */
-#define ARMV8_PMU_SLOTS_MASK	0xff
-
-#define ARMV8_PMU_BUS_SLOTS_SHIFT 8
-#define ARMV8_PMU_BUS_SLOTS_MASK 0xff
-#define ARMV8_PMU_BUS_WIDTH_SHIFT 16
-#define ARMV8_PMU_BUS_WIDTH_MASK 0xf
-
 #ifdef CONFIG_PERF_EVENTS
 struct pt_regs;
 extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index b6ba466e2e8a..0bd18de9fd97 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -57,7 +57,7 @@ static inline bool arch_thp_swp_supported(void)
  * fault on one CPU which has been handled concurrently by another CPU
  * does not need to perform additional invalidation.
  */
-#define flush_tlb_fix_spurious_fault(vma, address) do { } while (0)
+#define flush_tlb_fix_spurious_fault(vma, address, ptep) do { } while (0)
 
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
diff --git a/arch/arm64/include/asm/pointer_auth.h b/arch/arm64/include/asm/pointer_auth.h
index efb098de3a84..d2e0306e65d3 100644
--- a/arch/arm64/include/asm/pointer_auth.h
+++ b/arch/arm64/include/asm/pointer_auth.h
@@ -10,6 +10,13 @@
 #include <asm/memory.h>
 #include <asm/sysreg.h>
 
+/*
+ * The EL0/EL1 pointer bits used by a pointer authentication code.
+ * This is dependent on TBI0/TBI1 being enabled, or bits 63:56 would also apply.
+ */
+#define ptrauth_user_pac_mask()		GENMASK_ULL(54, vabits_actual)
+#define ptrauth_kernel_pac_mask()	GENMASK_ULL(63, vabits_actual)
+
 #define PR_PAC_ENABLED_KEYS_MASK                                               \
 	(PR_PAC_APIAKEY | PR_PAC_APIBKEY | PR_PAC_APDAKEY | PR_PAC_APDBKEY)
 
@@ -97,11 +104,6 @@ extern int ptrauth_set_enabled_keys(struct task_struct *tsk, unsigned long keys,
 				    unsigned long enabled);
 extern int ptrauth_get_enabled_keys(struct task_struct *tsk);
 
-static inline unsigned long ptrauth_strip_insn_pac(unsigned long ptr)
-{
-	return ptrauth_clear_pac(ptr);
-}
-
 static __always_inline void ptrauth_enable(void)
 {
 	if (!system_supports_address_auth())
@@ -133,7 +135,6 @@ static __always_inline void ptrauth_enable(void)
 #define ptrauth_prctl_reset_keys(tsk, arg)	(-EINVAL)
 #define ptrauth_set_enabled_keys(tsk, keys, enabled)	(-EINVAL)
 #define ptrauth_get_enabled_keys(tsk)	(-EINVAL)
-#define ptrauth_strip_insn_pac(lr)	(lr)
 #define ptrauth_suspend_exit()
 #define ptrauth_thread_init_user()
 #define ptrauth_thread_switch_user(tsk)
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index fc55f5a57a06..f2d26235bfb4 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -100,10 +100,10 @@ static inline void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
 extern int __cpu_disable(void);
 
 extern void __cpu_die(unsigned int cpu);
-extern void cpu_die(void);
-extern void cpu_die_early(void);
+extern void __noreturn cpu_die(void);
+extern void __noreturn cpu_die_early(void);
 
-static inline void cpu_park_loop(void)
+static inline void __noreturn cpu_park_loop(void)
 {
 	for (;;) {
 		wfe();
@@ -123,7 +123,7 @@ static inline void update_cpu_boot_status(int val)
  * which calls for a kernel panic. Update the boot status and park the calling
  * CPU.
  */
-static inline void cpu_panic_kernel(void)
+static inline void __noreturn cpu_panic_kernel(void)
 {
 	update_cpu_boot_status(CPU_PANIC_KERNEL);
 	cpu_park_loop();
@@ -143,7 +143,6 @@ bool cpus_are_stuck_in_kernel(void);
 
 extern void crash_smp_send_stop(void);
 extern bool smp_crash_stop_failed(void);
-extern void panic_smp_self_stop(void);
 
 #endif /* ifndef __ASSEMBLY__ */
 
diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h
index 4b73463423c3..5f5437621029 100644
--- a/arch/arm64/include/asm/sparsemem.h
+++ b/arch/arm64/include/asm/sparsemem.h
@@ -10,7 +10,7 @@
 /*
  * Section size must be at least 512MB for 64K base
  * page size config. Otherwise it will be less than
- * (MAX_ORDER - 1) and the build process will fail.
+ * MAX_ORDER and the build process will fail.
  */
 #ifdef CONFIG_ARM64_64K_PAGES
 #define SECTION_SIZE_BITS 29
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 9e3ecba3c4e6..c48b41c9b0cc 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -419,9 +419,6 @@
 #define SYS_MDCR_EL2			sys_reg(3, 4, 1, 1, 1)
 #define SYS_CPTR_EL2			sys_reg(3, 4, 1, 1, 2)
 #define SYS_HSTR_EL2			sys_reg(3, 4, 1, 1, 3)
-#define SYS_HFGRTR_EL2			sys_reg(3, 4, 1, 1, 4)
-#define SYS_HFGWTR_EL2			sys_reg(3, 4, 1, 1, 5)
-#define SYS_HFGITR_EL2			sys_reg(3, 4, 1, 1, 6)
 #define SYS_HACR_EL2			sys_reg(3, 4, 1, 1, 7)
 
 #define SYS_TTBR0_EL2			sys_reg(3, 4, 2, 0, 0)
@@ -758,12 +755,6 @@
 #define ICH_VTR_TDS_SHIFT	19
 #define ICH_VTR_TDS_MASK	(1 << ICH_VTR_TDS_SHIFT)
 
-/* HFG[WR]TR_EL2 bit definitions */
-#define HFGxTR_EL2_nTPIDR2_EL0_SHIFT	55
-#define HFGxTR_EL2_nTPIDR2_EL0_MASK	BIT_MASK(HFGxTR_EL2_nTPIDR2_EL0_SHIFT)
-#define HFGxTR_EL2_nSMPRI_EL1_SHIFT	54
-#define HFGxTR_EL2_nSMPRI_EL1_MASK	BIT_MASK(HFGxTR_EL2_nSMPRI_EL1_SHIFT)
-
 #define ARM64_FEATURE_FIELD_BITS	4
 
 /* Defined for compatibility only, do not add new users. */
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 5c7b2f9d5913..05f4fc265428 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -136,55 +136,9 @@ static inline void __uaccess_enable_hw_pan(void)
 			CONFIG_ARM64_PAN));
 }
 
-/*
- * The Tag Check Flag (TCF) mode for MTE is per EL, hence TCF0
- * affects EL0 and TCF affects EL1 irrespective of which TTBR is
- * used.
- * The kernel accesses TTBR0 usually with LDTR/STTR instructions
- * when UAO is available, so these would act as EL0 accesses using
- * TCF0.
- * However futex.h code uses exclusives which would be executed as
- * EL1, this can potentially cause a tag check fault even if the
- * user disables TCF0.
- *
- * To address the problem we set the PSTATE.TCO bit in uaccess_enable()
- * and reset it in uaccess_disable().
- *
- * The Tag check override (TCO) bit disables temporarily the tag checking
- * preventing the issue.
- */
-static inline void __uaccess_disable_tco(void)
-{
-	asm volatile(ALTERNATIVE("nop", SET_PSTATE_TCO(0),
-				 ARM64_MTE, CONFIG_KASAN_HW_TAGS));
-}
-
-static inline void __uaccess_enable_tco(void)
-{
-	asm volatile(ALTERNATIVE("nop", SET_PSTATE_TCO(1),
-				 ARM64_MTE, CONFIG_KASAN_HW_TAGS));
-}
-
-/*
- * These functions disable tag checking only if in MTE async mode
- * since the sync mode generates exceptions synchronously and the
- * nofault or load_unaligned_zeropad can handle them.
- */
-static inline void __uaccess_disable_tco_async(void)
-{
-	if (system_uses_mte_async_or_asymm_mode())
-		 __uaccess_disable_tco();
-}
-
-static inline void __uaccess_enable_tco_async(void)
-{
-	if (system_uses_mte_async_or_asymm_mode())
-		__uaccess_enable_tco();
-}
-
 static inline void uaccess_disable_privileged(void)
 {
-	__uaccess_disable_tco();
+	mte_disable_tco();
 
 	if (uaccess_ttbr0_disable())
 		return;
@@ -194,7 +148,7 @@ static inline void uaccess_disable_privileged(void)
 
 static inline void uaccess_enable_privileged(void)
 {
-	__uaccess_enable_tco();
+	mte_enable_tco();
 
 	if (uaccess_ttbr0_enable())
 		return;
@@ -237,7 +191,7 @@ static inline void __user *__uaccess_mask_ptr(const void __user *ptr)
 	"1:	" load "	" reg "1, [%2]\n"			\
 	"2:\n"								\
 	_ASM_EXTABLE_##type##ACCESS_ERR_ZERO(1b, 2b, %w0, %w1)		\
-	: "+r" (err), "=&r" (x)						\
+	: "+r" (err), "=r" (x)						\
 	: "r" (addr))
 
 #define __raw_get_mem(ldr, x, ptr, err, type)					\
@@ -302,8 +256,8 @@ do {									\
 #define get_user	__get_user
 
 /*
- * We must not call into the scheduler between __uaccess_enable_tco_async() and
- * __uaccess_disable_tco_async(). As `dst` and `src` may contain blocking
+ * We must not call into the scheduler between __mte_enable_tco_async() and
+ * __mte_disable_tco_async(). As `dst` and `src` may contain blocking
  * functions, we must evaluate these outside of the critical section.
  */
 #define __get_kernel_nofault(dst, src, type, err_label)			\
@@ -312,10 +266,10 @@ do {									\
 	__typeof__(src) __gkn_src = (src);				\
 	int __gkn_err = 0;						\
 									\
-	__uaccess_enable_tco_async();					\
+	__mte_enable_tco_async();					\
 	__raw_get_mem("ldr", *((type *)(__gkn_dst)),			\
 		      (__force type *)(__gkn_src), __gkn_err, K);	\
-	__uaccess_disable_tco_async();					\
+	__mte_disable_tco_async();					\
 									\
 	if (unlikely(__gkn_err))					\
 		goto err_label;						\
@@ -327,7 +281,7 @@ do {									\
 	"2:\n"								\
 	_ASM_EXTABLE_##type##ACCESS_ERR(1b, 2b, %w0)			\
 	: "+r" (err)							\
-	: "r" (x), "r" (addr))
+	: "rZ" (x), "r" (addr))
 
 #define __raw_put_mem(str, x, ptr, err, type)					\
 do {										\
@@ -388,8 +342,8 @@ do {									\
 #define put_user	__put_user
 
 /*
- * We must not call into the scheduler between __uaccess_enable_tco_async() and
- * __uaccess_disable_tco_async(). As `dst` and `src` may contain blocking
+ * We must not call into the scheduler between __mte_enable_tco_async() and
+ * __mte_disable_tco_async(). As `dst` and `src` may contain blocking
  * functions, we must evaluate these outside of the critical section.
  */
 #define __put_kernel_nofault(dst, src, type, err_label)			\
@@ -398,10 +352,10 @@ do {									\
 	__typeof__(src) __pkn_src = (src);				\
 	int __pkn_err = 0;						\
 									\
-	__uaccess_enable_tco_async();					\
+	__mte_enable_tco_async();					\
 	__raw_put_mem("str", *((type *)(__pkn_src)),			\
 		      (__force type *)(__pkn_dst), __pkn_err, K);	\
-	__uaccess_disable_tco_async();					\
+	__mte_disable_tco_async();					\
 									\
 	if (unlikely(__pkn_err))					\
 		goto err_label;						\
@@ -449,8 +403,6 @@ extern long strncpy_from_user(char *dest, const char __user *src, long count);
 extern __must_check long strnlen_user(const char __user *str, long n);
 
 #ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE
-struct page;
-void memcpy_page_flushcache(char *to, struct page *page, size_t offset, size_t len);
 extern unsigned long __must_check __copy_user_flushcache(void *to, const void __user *from, unsigned long n);
 
 static inline int __copy_from_user_flushcache(void *dst, const void __user *src, unsigned size)
diff --git a/arch/arm64/include/asm/word-at-a-time.h b/arch/arm64/include/asm/word-at-a-time.h
index 1c8e4f2490bf..f3b151ed0d7a 100644
--- a/arch/arm64/include/asm/word-at-a-time.h
+++ b/arch/arm64/include/asm/word-at-a-time.h
@@ -55,7 +55,7 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 {
 	unsigned long ret;
 
-	__uaccess_enable_tco_async();
+	__mte_enable_tco_async();
 
 	/* Load word from unaligned pointer addr */
 	asm(
@@ -65,7 +65,7 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 	: "=&r" (ret)
 	: "r" (addr), "Q" (*(unsigned long *)addr));
 
-	__uaccess_disable_tco_async();
+	__mte_disable_tco_async();
 
 	return ret;
 }
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index ceba6792f5b3..7c2bb4e72476 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -45,7 +45,6 @@ obj-$(CONFIG_FUNCTION_TRACER)		+= ftrace.o entry-ftrace.o
 obj-$(CONFIG_MODULES)			+= module.o
 obj-$(CONFIG_ARM64_MODULE_PLTS)		+= module-plts.o
 obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o perf_callchain.o
-obj-$(CONFIG_HW_PERF_EVENTS)		+= perf_event.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_CPU_PM)			+= sleep.o suspend.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index 8a9052cf3013..1febd412b4d2 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -420,14 +420,14 @@ static DEFINE_MUTEX(insn_emulation_mutex);
 
 static void enable_insn_hw_mode(void *data)
 {
-	struct insn_emulation *insn = (struct insn_emulation *)data;
+	struct insn_emulation *insn = data;
 	if (insn->set_hw_mode)
 		insn->set_hw_mode(true);
 }
 
 static void disable_insn_hw_mode(void *data)
 {
-	struct insn_emulation *insn = (struct insn_emulation *)data;
+	struct insn_emulation *insn = data;
 	if (insn->set_hw_mode)
 		insn->set_hw_mode(false);
 }
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index ae345b06e9f7..0996094b0d22 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -93,6 +93,9 @@ int main(void)
   DEFINE(FREGS_LR,		offsetof(struct ftrace_regs, lr));
   DEFINE(FREGS_SP,		offsetof(struct ftrace_regs, sp));
   DEFINE(FREGS_PC,		offsetof(struct ftrace_regs, pc));
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+  DEFINE(FREGS_DIRECT_TRAMP,	offsetof(struct ftrace_regs, direct_tramp));
+#endif
   DEFINE(FREGS_SIZE,		sizeof(struct ftrace_regs));
   BLANK();
 #endif
@@ -197,6 +200,9 @@ int main(void)
 #endif
 #ifdef CONFIG_FUNCTION_TRACER
   DEFINE(FTRACE_OPS_FUNC,		offsetof(struct ftrace_ops, func));
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+  DEFINE(FTRACE_OPS_DIRECT_CALL,	offsetof(struct ftrace_ops, direct_call));
+#endif
 #endif
   return 0;
 }
diff --git a/arch/arm64/kernel/cacheinfo.c b/arch/arm64/kernel/cacheinfo.c
index c307f69e9b55..d9c9218fa1fd 100644
--- a/arch/arm64/kernel/cacheinfo.c
+++ b/arch/arm64/kernel/cacheinfo.c
@@ -38,11 +38,9 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
 	this_leaf->type = type;
 }
 
-int init_cache_level(unsigned int cpu)
+static void detect_cache_level(unsigned int *level_p, unsigned int *leaves_p)
 {
 	unsigned int ctype, level, leaves;
-	int fw_level, ret;
-	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
 
 	for (level = 1, leaves = 0; level <= MAX_CACHE_LEVEL; level++) {
 		ctype = get_cache_type(level);
@@ -54,6 +52,27 @@ int init_cache_level(unsigned int cpu)
 		leaves += (ctype == CACHE_TYPE_SEPARATE) ? 2 : 1;
 	}
 
+	*level_p = level;
+	*leaves_p = leaves;
+}
+
+int early_cache_level(unsigned int cpu)
+{
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+
+	detect_cache_level(&this_cpu_ci->num_levels, &this_cpu_ci->num_leaves);
+
+	return 0;
+}
+
+int init_cache_level(unsigned int cpu)
+{
+	unsigned int level, leaves;
+	int fw_level, ret;
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+
+	detect_cache_level(&level, &leaves);
+
 	if (acpi_disabled) {
 		fw_level = of_find_last_cache_level(cpu);
 	} else {
diff --git a/arch/arm64/kernel/compat_alignment.c b/arch/arm64/kernel/compat_alignment.c
index 5edec2f49ec9..deff21bfa680 100644
--- a/arch/arm64/kernel/compat_alignment.c
+++ b/arch/arm64/kernel/compat_alignment.c
@@ -314,36 +314,32 @@ int do_compat_alignment_fixup(unsigned long addr, struct pt_regs *regs)
 	int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs);
 	unsigned int type;
 	u32 instr = 0;
-	u16 tinstr = 0;
 	int isize = 4;
 	int thumb2_32b = 0;
-	int fault;
 
 	instrptr = instruction_pointer(regs);
 
 	if (compat_thumb_mode(regs)) {
 		__le16 __user *ptr = (__le16 __user *)(instrptr & ~1);
+		u16 tinstr, tinst2;
 
-		fault = alignment_get_thumb(regs, ptr, &tinstr);
-		if (!fault) {
-			if (IS_T32(tinstr)) {
-				/* Thumb-2 32-bit */
-				u16 tinst2;
-				fault = alignment_get_thumb(regs, ptr + 1, &tinst2);
-				instr = ((u32)tinstr << 16) | tinst2;
-				thumb2_32b = 1;
-			} else {
-				isize = 2;
-				instr = thumb2arm(tinstr);
-			}
+		if (alignment_get_thumb(regs, ptr, &tinstr))
+			return 1;
+
+		if (IS_T32(tinstr)) { /* Thumb-2 32-bit */
+			if (alignment_get_thumb(regs, ptr + 1, &tinst2))
+				return 1;
+			instr = ((u32)tinstr << 16) | tinst2;
+			thumb2_32b = 1;
+		} else {
+			isize = 2;
+			instr = thumb2arm(tinstr);
 		}
 	} else {
-		fault = alignment_get_arm(regs, (__le32 __user *)instrptr, &instr);
+		if (alignment_get_arm(regs, (__le32 __user *)instrptr, &instr))
+			return 1;
 	}
 
-	if (fault)
-		return 1;
-
 	switch (CODING_BITS(instr)) {
 	case 0x00000000:	/* 3.13.4 load/store instruction extensions */
 		if (LDSTHD_I_BIT(instr))
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 2e3e55139777..2f9911256503 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -140,6 +140,13 @@ void dump_cpu_features(void)
 	pr_emerg("0x%*pb\n", ARM64_NCAPS, &cpu_hwcaps);
 }
 
+#define ARM64_CPUID_FIELDS(reg, field, min_value)			\
+		.sys_reg = SYS_##reg,							\
+		.field_pos = reg##_##field##_SHIFT,						\
+		.field_width = reg##_##field##_WIDTH,						\
+		.sign = reg##_##field##_SIGNED,							\
+		.min_field_value = reg##_##field##_##min_value,
+
 #define __ARM64_FTR_BITS(SIGNED, VISIBLE, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
 	{						\
 		.sign = SIGNED,				\
@@ -1490,10 +1497,18 @@ static const DEVICE_ATTR_RO(aarch32_el0);
 
 static int __init aarch32_el0_sysfs_init(void)
 {
+	struct device *dev_root;
+	int ret = 0;
+
 	if (!allow_mismatched_32bit_el0)
 		return 0;
 
-	return device_create_file(cpu_subsys.dev_root, &dev_attr_aarch32_el0);
+	dev_root = bus_get_dev_root(&cpu_subsys);
+	if (dev_root) {
+		ret = device_create_file(dev_root, &dev_attr_aarch32_el0);
+		put_device(dev_root);
+	}
+	return ret;
 }
 device_initcall(aarch32_el0_sysfs_init);
 
@@ -2206,22 +2221,14 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_GIC_CPUIF_SYSREGS,
 		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
 		.matches = has_useable_gicv3_cpuif,
-		.sys_reg = SYS_ID_AA64PFR0_EL1,
-		.field_pos = ID_AA64PFR0_EL1_GIC_SHIFT,
-		.field_width = 4,
-		.sign = FTR_UNSIGNED,
-		.min_field_value = 1,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, GIC, IMP)
 	},
 	{
 		.desc = "Enhanced Counter Virtualization",
 		.capability = ARM64_HAS_ECV,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64MMFR0_EL1,
-		.field_pos = ID_AA64MMFR0_EL1_ECV_SHIFT,
-		.field_width = 4,
-		.sign = FTR_UNSIGNED,
-		.min_field_value = 1,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR0_EL1, ECV, IMP)
 	},
 #ifdef CONFIG_ARM64_PAN
 	{
@@ -2229,12 +2236,8 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_PAN,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64MMFR1_EL1,
-		.field_pos = ID_AA64MMFR1_EL1_PAN_SHIFT,
-		.field_width = 4,
-		.sign = FTR_UNSIGNED,
-		.min_field_value = 1,
 		.cpu_enable = cpu_enable_pan,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, PAN, IMP)
 	},
 #endif /* CONFIG_ARM64_PAN */
 #ifdef CONFIG_ARM64_EPAN
@@ -2243,11 +2246,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_EPAN,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64MMFR1_EL1,
-		.field_pos = ID_AA64MMFR1_EL1_PAN_SHIFT,
-		.field_width = 4,
-		.sign = FTR_UNSIGNED,
-		.min_field_value = 3,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, PAN, PAN3)
 	},
 #endif /* CONFIG_ARM64_EPAN */
 #ifdef CONFIG_ARM64_LSE_ATOMICS
@@ -2256,11 +2255,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_LSE_ATOMICS,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64ISAR0_EL1,
-		.field_pos = ID_AA64ISAR0_EL1_ATOMIC_SHIFT,
-		.field_width = 4,
-		.sign = FTR_UNSIGNED,
-		.min_field_value = 2,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, ATOMIC, IMP)
 	},
 #endif /* CONFIG_ARM64_LSE_ATOMICS */
 	{
@@ -2281,21 +2276,13 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_NESTED_VIRT,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_nested_virt_support,
-		.sys_reg = SYS_ID_AA64MMFR2_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64MMFR2_EL1_NV_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64MMFR2_EL1_NV_IMP,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, IMP)
 	},
 	{
 		.capability = ARM64_HAS_32BIT_EL0_DO_NOT_USE,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_32bit_el0,
-		.sys_reg = SYS_ID_AA64PFR0_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64PFR0_EL1_EL0_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64PFR0_EL1_ELx_32BIT_64BIT,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, EL0, AARCH32)
 	},
 #ifdef CONFIG_KVM
 	{
@@ -2303,11 +2290,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_32BIT_EL1,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64PFR0_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64PFR0_EL1_EL1_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64PFR0_EL1_ELx_32BIT_64BIT,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, EL1, AARCH32)
 	},
 	{
 		.desc = "Protected KVM",
@@ -2320,17 +2303,14 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.desc = "Kernel page table isolation (KPTI)",
 		.capability = ARM64_UNMAP_KERNEL_AT_EL0,
 		.type = ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE,
+		.cpu_enable = kpti_install_ng_mappings,
+		.matches = unmap_kernel_at_el0,
 		/*
 		 * The ID feature fields below are used to indicate that
 		 * the CPU doesn't need KPTI. See unmap_kernel_at_el0 for
 		 * more details.
 		 */
-		.sys_reg = SYS_ID_AA64PFR0_EL1,
-		.field_pos = ID_AA64PFR0_EL1_CSV3_SHIFT,
-		.field_width = 4,
-		.min_field_value = 1,
-		.matches = unmap_kernel_at_el0,
-		.cpu_enable = kpti_install_ng_mappings,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, CSV3, IMP)
 	},
 	{
 		/* FP/SIMD is not implemented */
@@ -2345,21 +2325,14 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_DCPOP,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64ISAR1_EL1,
-		.field_pos = ID_AA64ISAR1_EL1_DPB_SHIFT,
-		.field_width = 4,
-		.min_field_value = 1,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, DPB, IMP)
 	},
 	{
 		.desc = "Data cache clean to Point of Deep Persistence",
 		.capability = ARM64_HAS_DCPODP,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64ISAR1_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64ISAR1_EL1_DPB_SHIFT,
-		.field_width = 4,
-		.min_field_value = 2,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, DPB, DPB2)
 	},
 #endif
 #ifdef CONFIG_ARM64_SVE
@@ -2367,13 +2340,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.desc = "Scalable Vector Extension",
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.capability = ARM64_SVE,
-		.sys_reg = SYS_ID_AA64PFR0_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64PFR0_EL1_SVE_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64PFR0_EL1_SVE_IMP,
-		.matches = has_cpuid_feature,
 		.cpu_enable = sve_kernel_enable,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, SVE, IMP)
 	},
 #endif /* CONFIG_ARM64_SVE */
 #ifdef CONFIG_ARM64_RAS_EXTN
@@ -2382,12 +2351,8 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_RAS_EXTN,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64PFR0_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64PFR0_EL1_RAS_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64PFR0_EL1_RAS_IMP,
 		.cpu_enable = cpu_clear_disr,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, RAS, IMP)
 	},
 #endif /* CONFIG_ARM64_RAS_EXTN */
 #ifdef CONFIG_ARM64_AMU_EXTN
@@ -2401,12 +2366,8 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_AMU_EXTN,
 		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
 		.matches = has_amu,
-		.sys_reg = SYS_ID_AA64PFR0_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64PFR0_EL1_AMU_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64PFR0_EL1_AMU_IMP,
 		.cpu_enable = cpu_amu_enable,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, AMU, IMP)
 	},
 #endif /* CONFIG_ARM64_AMU_EXTN */
 	{
@@ -2426,34 +2387,22 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.desc = "Stage-2 Force Write-Back",
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.capability = ARM64_HAS_STAGE2_FWB,
-		.sys_reg = SYS_ID_AA64MMFR2_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64MMFR2_EL1_FWB_SHIFT,
-		.field_width = 4,
-		.min_field_value = 1,
 		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, FWB, IMP)
 	},
 	{
 		.desc = "ARMv8.4 Translation Table Level",
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.capability = ARM64_HAS_ARMv8_4_TTL,
-		.sys_reg = SYS_ID_AA64MMFR2_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64MMFR2_EL1_TTL_SHIFT,
-		.field_width = 4,
-		.min_field_value = 1,
 		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, TTL, IMP)
 	},
 	{
 		.desc = "TLB range maintenance instructions",
 		.capability = ARM64_HAS_TLB_RANGE,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64ISAR0_EL1,
-		.field_pos = ID_AA64ISAR0_EL1_TLB_SHIFT,
-		.field_width = 4,
-		.sign = FTR_UNSIGNED,
-		.min_field_value = ID_AA64ISAR0_EL1_TLB_RANGE,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, TLB, RANGE)
 	},
 #ifdef CONFIG_ARM64_HW_AFDBM
 	{
@@ -2467,13 +2416,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		 */
 		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
 		.capability = ARM64_HW_DBM,
-		.sys_reg = SYS_ID_AA64MMFR1_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64MMFR1_EL1_HAFDBS_SHIFT,
-		.field_width = 4,
-		.min_field_value = 2,
 		.matches = has_hw_dbm,
 		.cpu_enable = cpu_enable_hw_dbm,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, HAFDBS, DBM)
 	},
 #endif
 	{
@@ -2481,21 +2426,14 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_CRC32,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64ISAR0_EL1,
-		.field_pos = ID_AA64ISAR0_EL1_CRC32_SHIFT,
-		.field_width = 4,
-		.min_field_value = 1,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, CRC32, IMP)
 	},
 	{
 		.desc = "Speculative Store Bypassing Safe (SSBS)",
 		.capability = ARM64_SSBS,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64PFR1_EL1,
-		.field_pos = ID_AA64PFR1_EL1_SSBS_SHIFT,
-		.field_width = 4,
-		.sign = FTR_UNSIGNED,
-		.min_field_value = ID_AA64PFR1_EL1_SSBS_IMP,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SSBS, IMP)
 	},
 #ifdef CONFIG_ARM64_CNP
 	{
@@ -2503,12 +2441,8 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_CNP,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_useable_cnp,
-		.sys_reg = SYS_ID_AA64MMFR2_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64MMFR2_EL1_CnP_SHIFT,
-		.field_width = 4,
-		.min_field_value = 1,
 		.cpu_enable = cpu_enable_cnp,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, CnP, IMP)
 	},
 #endif
 	{
@@ -2516,45 +2450,29 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_SB,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64ISAR1_EL1,
-		.field_pos = ID_AA64ISAR1_EL1_SB_SHIFT,
-		.field_width = 4,
-		.sign = FTR_UNSIGNED,
-		.min_field_value = 1,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, SB, IMP)
 	},
 #ifdef CONFIG_ARM64_PTR_AUTH
 	{
 		.desc = "Address authentication (architected QARMA5 algorithm)",
 		.capability = ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA5,
 		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
-		.sys_reg = SYS_ID_AA64ISAR1_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64ISAR1_EL1_APA_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64ISAR1_EL1_APA_PAuth,
 		.matches = has_address_auth_cpucap,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, APA, PAuth)
 	},
 	{
 		.desc = "Address authentication (architected QARMA3 algorithm)",
 		.capability = ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA3,
 		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
-		.sys_reg = SYS_ID_AA64ISAR2_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64ISAR2_EL1_APA3_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64ISAR2_EL1_APA3_PAuth,
 		.matches = has_address_auth_cpucap,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, APA3, PAuth)
 	},
 	{
 		.desc = "Address authentication (IMP DEF algorithm)",
 		.capability = ARM64_HAS_ADDRESS_AUTH_IMP_DEF,
 		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
-		.sys_reg = SYS_ID_AA64ISAR1_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64ISAR1_EL1_API_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64ISAR1_EL1_API_PAuth,
 		.matches = has_address_auth_cpucap,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, API, PAuth)
 	},
 	{
 		.capability = ARM64_HAS_ADDRESS_AUTH,
@@ -2565,34 +2483,22 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.desc = "Generic authentication (architected QARMA5 algorithm)",
 		.capability = ARM64_HAS_GENERIC_AUTH_ARCH_QARMA5,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
-		.sys_reg = SYS_ID_AA64ISAR1_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64ISAR1_EL1_GPA_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64ISAR1_EL1_GPA_IMP,
 		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, GPA, IMP)
 	},
 	{
 		.desc = "Generic authentication (architected QARMA3 algorithm)",
 		.capability = ARM64_HAS_GENERIC_AUTH_ARCH_QARMA3,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
-		.sys_reg = SYS_ID_AA64ISAR2_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64ISAR2_EL1_GPA3_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64ISAR2_EL1_GPA3_IMP,
 		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, GPA3, IMP)
 	},
 	{
 		.desc = "Generic authentication (IMP DEF algorithm)",
 		.capability = ARM64_HAS_GENERIC_AUTH_IMP_DEF,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
-		.sys_reg = SYS_ID_AA64ISAR1_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64ISAR1_EL1_GPI_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64ISAR1_EL1_GPI_IMP,
 		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, GPI, IMP)
 	},
 	{
 		.capability = ARM64_HAS_GENERIC_AUTH,
@@ -2624,13 +2530,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.desc = "E0PD",
 		.capability = ARM64_HAS_E0PD,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
-		.sys_reg = SYS_ID_AA64MMFR2_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_width = 4,
-		.field_pos = ID_AA64MMFR2_EL1_E0PD_SHIFT,
-		.matches = has_cpuid_feature,
-		.min_field_value = 1,
 		.cpu_enable = cpu_enable_e0pd,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, E0PD, IMP)
 	},
 #endif
 	{
@@ -2638,11 +2540,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_RNG,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64ISAR0_EL1,
-		.field_pos = ID_AA64ISAR0_EL1_RNDR_SHIFT,
-		.field_width = 4,
-		.sign = FTR_UNSIGNED,
-		.min_field_value = 1,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, RNDR, IMP)
 	},
 #ifdef CONFIG_ARM64_BTI
 	{
@@ -2655,11 +2553,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 #endif
 		.matches = has_cpuid_feature,
 		.cpu_enable = bti_enable,
-		.sys_reg = SYS_ID_AA64PFR1_EL1,
-		.field_pos = ID_AA64PFR1_EL1_BT_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64PFR1_EL1_BT_IMP,
-		.sign = FTR_UNSIGNED,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, BT, IMP)
 	},
 #endif
 #ifdef CONFIG_ARM64_MTE
@@ -2668,120 +2562,80 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_MTE,
 		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64PFR1_EL1,
-		.field_pos = ID_AA64PFR1_EL1_MTE_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64PFR1_EL1_MTE_MTE2,
-		.sign = FTR_UNSIGNED,
 		.cpu_enable = cpu_enable_mte,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, MTE, MTE2)
 	},
 	{
 		.desc = "Asymmetric MTE Tag Check Fault",
 		.capability = ARM64_MTE_ASYMM,
 		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
 		.matches = has_cpuid_feature,
-		.sys_reg = SYS_ID_AA64PFR1_EL1,
-		.field_pos = ID_AA64PFR1_EL1_MTE_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64PFR1_EL1_MTE_MTE3,
-		.sign = FTR_UNSIGNED,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, MTE, MTE3)
 	},
 #endif /* CONFIG_ARM64_MTE */
 	{
 		.desc = "RCpc load-acquire (LDAPR)",
 		.capability = ARM64_HAS_LDAPR,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
-		.sys_reg = SYS_ID_AA64ISAR1_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64ISAR1_EL1_LRCPC_SHIFT,
-		.field_width = 4,
 		.matches = has_cpuid_feature,
-		.min_field_value = 1,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, LRCPC, IMP)
 	},
 #ifdef CONFIG_ARM64_SME
 	{
 		.desc = "Scalable Matrix Extension",
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.capability = ARM64_SME,
-		.sys_reg = SYS_ID_AA64PFR1_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64PFR1_EL1_SME_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64PFR1_EL1_SME_IMP,
 		.matches = has_cpuid_feature,
 		.cpu_enable = sme_kernel_enable,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SME, IMP)
 	},
 	/* FA64 should be sorted after the base SME capability */
 	{
 		.desc = "FA64",
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.capability = ARM64_SME_FA64,
-		.sys_reg = SYS_ID_AA64SMFR0_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64SMFR0_EL1_FA64_SHIFT,
-		.field_width = 1,
-		.min_field_value = ID_AA64SMFR0_EL1_FA64_IMP,
 		.matches = has_cpuid_feature,
 		.cpu_enable = fa64_kernel_enable,
+		ARM64_CPUID_FIELDS(ID_AA64SMFR0_EL1, FA64, IMP)
 	},
 	{
 		.desc = "SME2",
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.capability = ARM64_SME2,
-		.sys_reg = SYS_ID_AA64PFR1_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64PFR1_EL1_SME_SHIFT,
-		.field_width = ID_AA64PFR1_EL1_SME_WIDTH,
-		.min_field_value = ID_AA64PFR1_EL1_SME_SME2,
 		.matches = has_cpuid_feature,
 		.cpu_enable = sme2_kernel_enable,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SME, SME2)
 	},
 #endif /* CONFIG_ARM64_SME */
 	{
 		.desc = "WFx with timeout",
 		.capability = ARM64_HAS_WFXT,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
-		.sys_reg = SYS_ID_AA64ISAR2_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64ISAR2_EL1_WFxT_SHIFT,
-		.field_width = 4,
 		.matches = has_cpuid_feature,
-		.min_field_value = ID_AA64ISAR2_EL1_WFxT_IMP,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, WFxT, IMP)
 	},
 	{
 		.desc = "Trap EL0 IMPLEMENTATION DEFINED functionality",
 		.capability = ARM64_HAS_TIDCP1,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
-		.sys_reg = SYS_ID_AA64MMFR1_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64MMFR1_EL1_TIDCP1_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64MMFR1_EL1_TIDCP1_IMP,
 		.matches = has_cpuid_feature,
 		.cpu_enable = cpu_trap_el0_impdef,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, TIDCP1, IMP)
 	},
 	{
 		.desc = "Data independent timing control (DIT)",
 		.capability = ARM64_HAS_DIT,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
-		.sys_reg = SYS_ID_AA64PFR0_EL1,
-		.sign = FTR_UNSIGNED,
-		.field_pos = ID_AA64PFR0_EL1_DIT_SHIFT,
-		.field_width = 4,
-		.min_field_value = ID_AA64PFR0_EL1_DIT_IMP,
 		.matches = has_cpuid_feature,
 		.cpu_enable = cpu_enable_dit,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, DIT, IMP)
 	},
 	{},
 };
 
 #define HWCAP_CPUID_MATCH(reg, field, min_value)			\
-		.matches = has_user_cpuid_feature,					\
-		.sys_reg = SYS_##reg,							\
-		.field_pos = reg##_##field##_SHIFT,						\
-		.field_width = reg##_##field##_WIDTH,						\
-		.sign = reg##_##field##_SIGNED,							\
-		.min_field_value = reg##_##field##_##min_value,
+		.matches = has_user_cpuid_feature,			\
+		ARM64_CPUID_FIELDS(reg, field, min_value)
 
 #define __HWCAP_CAP(name, cap_type, cap)					\
 		.desc = name,							\
@@ -2811,26 +2665,26 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 #ifdef CONFIG_ARM64_PTR_AUTH
 static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = {
 	{
-		HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, APA, PAuth)
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, APA, PAuth)
 	},
 	{
-		HWCAP_CPUID_MATCH(ID_AA64ISAR2_EL1, APA3, PAuth)
+		ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, APA3, PAuth)
 	},
 	{
-		HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, API, PAuth)
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, API, PAuth)
 	},
 	{},
 };
 
 static const struct arm64_cpu_capabilities ptr_auth_hwcap_gen_matches[] = {
 	{
-		HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, GPA, IMP)
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, GPA, IMP)
 	},
 	{
-		HWCAP_CPUID_MATCH(ID_AA64ISAR2_EL1, GPA3, IMP)
+		ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, GPA3, IMP)
 	},
 	{
-		HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, GPI, IMP)
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, GPI, IMP)
 	},
 	{},
 };
diff --git a/arch/arm64/kernel/crash_core.c b/arch/arm64/kernel/crash_core.c
index 2b65aae332ce..66cde752cd74 100644
--- a/arch/arm64/kernel/crash_core.c
+++ b/arch/arm64/kernel/crash_core.c
@@ -8,6 +8,7 @@
 #include <asm/cpufeature.h>
 #include <asm/memory.h>
 #include <asm/pgtable-hwdef.h>
+#include <asm/pointer_auth.h>
 
 static inline u64 get_tcr_el1_t1sz(void);
 
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 3da09778267e..64f2ecbdfe5c 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -438,6 +438,11 @@ int kernel_active_single_step(void)
 }
 NOKPROBE_SYMBOL(kernel_active_single_step);
 
+void kernel_rewind_single_step(struct pt_regs *regs)
+{
+	set_regs_spsr_ss(regs);
+}
+
 /* ptrace API */
 void user_enable_single_step(struct task_struct *task)
 {
diff --git a/arch/arm64/kernel/efi-header.S b/arch/arm64/kernel/efi-header.S
index 28d8a5dca5f1..d731b4655df8 100644
--- a/arch/arm64/kernel/efi-header.S
+++ b/arch/arm64/kernel/efi-header.S
@@ -66,7 +66,7 @@
 	.long	.Lefi_header_end - .L_head		// SizeOfHeaders
 	.long	0					// CheckSum
 	.short	IMAGE_SUBSYSTEM_EFI_APPLICATION		// Subsystem
-	.short	0					// DllCharacteristics
+	.short	IMAGE_DLL_CHARACTERISTICS_NX_COMPAT	// DllCharacteristics
 	.quad	0					// SizeOfStackReserve
 	.quad	0					// SizeOfStackCommit
 	.quad	0					// SizeOfHeapReserve
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index cce1167199e3..3af3c01c93a6 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -840,7 +840,7 @@ UNHANDLED(el0t, 32, error)
 #endif /* CONFIG_COMPAT */
 
 #ifdef CONFIG_VMAP_STACK
-asmlinkage void noinstr handle_bad_stack(struct pt_regs *regs)
+asmlinkage void noinstr __noreturn handle_bad_stack(struct pt_regs *regs)
 {
 	unsigned long esr = read_sysreg(esr_el1);
 	unsigned long far = read_sysreg(far_el1);
diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S
index 350ed81324ac..1c38a60575aa 100644
--- a/arch/arm64/kernel/entry-ftrace.S
+++ b/arch/arm64/kernel/entry-ftrace.S
@@ -36,6 +36,31 @@
 SYM_CODE_START(ftrace_caller)
 	bti	c
 
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
+	/*
+	 * The literal pointer to the ops is at an 8-byte aligned boundary
+	 * which is either 12 or 16 bytes before the BL instruction in the call
+	 * site. See ftrace_call_adjust() for details.
+	 *
+	 * Therefore here the LR points at `literal + 16` or `literal + 20`,
+	 * and we can find the address of the literal in either case by
+	 * aligning to an 8-byte boundary and subtracting 16. We do the
+	 * alignment first as this allows us to fold the subtraction into the
+	 * LDR.
+	 */
+	bic	x11, x30, 0x7
+	ldr	x11, [x11, #-(4 * AARCH64_INSN_SIZE)]		// op
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	/*
+	 * If the op has a direct call, handle it immediately without
+	 * saving/restoring registers.
+	 */
+	ldr	x17, [x11, #FTRACE_OPS_DIRECT_CALL]		// op->direct_call
+	cbnz	x17, ftrace_caller_direct
+#endif
+#endif
+
 	/* Save original SP */
 	mov	x10, sp
 
@@ -49,6 +74,10 @@ SYM_CODE_START(ftrace_caller)
 	stp	x6, x7, [sp, #FREGS_X6]
 	str	x8,     [sp, #FREGS_X8]
 
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	str	xzr, [sp, #FREGS_DIRECT_TRAMP]
+#endif
+
 	/* Save the callsite's FP, LR, SP */
 	str	x29, [sp, #FREGS_FP]
 	str	x9,  [sp, #FREGS_LR]
@@ -71,20 +100,7 @@ SYM_CODE_START(ftrace_caller)
 	mov	x3, sp					// regs
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
-	/*
-	 * The literal pointer to the ops is at an 8-byte aligned boundary
-	 * which is either 12 or 16 bytes before the BL instruction in the call
-	 * site. See ftrace_call_adjust() for details.
-	 *
-	 * Therefore here the LR points at `literal + 16` or `literal + 20`,
-	 * and we can find the address of the literal in either case by
-	 * aligning to an 8-byte boundary and subtracting 16. We do the
-	 * alignment first as this allows us to fold the subtraction into the
-	 * LDR.
-	 */
-	bic	x2, x30, 0x7
-	ldr	x2, [x2, #-16]				// op
-
+	mov	x2, x11					// op
 	ldr	x4, [x2, #FTRACE_OPS_FUNC]		// op->func
 	blr	x4					// op->func(ip, parent_ip, op, regs)
 
@@ -107,8 +123,15 @@ SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
 	ldp	x6, x7, [sp, #FREGS_X6]
 	ldr	x8,     [sp, #FREGS_X8]
 
-	/* Restore the callsite's FP, LR, PC */
+	/* Restore the callsite's FP */
 	ldr	x29, [sp, #FREGS_FP]
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	ldr	x17, [sp, #FREGS_DIRECT_TRAMP]
+	cbnz	x17, ftrace_caller_direct_late
+#endif
+
+	/* Restore the callsite's LR and PC */
 	ldr	x30, [sp, #FREGS_LR]
 	ldr	x9,  [sp, #FREGS_PC]
 
@@ -116,8 +139,45 @@ SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
 	add	sp, sp, #FREGS_SIZE + 32
 
 	ret	x9
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+SYM_INNER_LABEL(ftrace_caller_direct_late, SYM_L_LOCAL)
+	/*
+	 * Head to a direct trampoline in x17 after having run other tracers.
+	 * The ftrace_regs are live, and x0-x8 and FP have been restored. The
+	 * LR, PC, and SP have not been restored.
+	 */
+
+	/*
+	 * Restore the callsite's LR and PC matching the trampoline calling
+	 * convention.
+	 */
+	ldr	x9,  [sp, #FREGS_LR]
+	ldr	x30, [sp, #FREGS_PC]
+
+	/* Restore the callsite's SP */
+	add	sp, sp, #FREGS_SIZE + 32
+
+SYM_INNER_LABEL(ftrace_caller_direct, SYM_L_LOCAL)
+	/*
+	 * Head to a direct trampoline in x17.
+	 *
+	 * We use `BR X17` as this can safely land on a `BTI C` or `PACIASP` in
+	 * the trampoline, and will not unbalance any return stack.
+	 */
+	br	x17
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
 SYM_CODE_END(ftrace_caller)
 
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+SYM_CODE_START(ftrace_stub_direct_tramp)
+	bti	c
+	mov	x10, x30
+	mov	x30, x9
+	ret	x10
+SYM_CODE_END(ftrace_stub_direct_tramp)
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
+
 #else /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
 
 /*
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 9e7e50a0fd76..2fbafa5cc7ac 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -299,7 +299,7 @@ void task_set_vl_onexec(struct task_struct *task, enum vec_type type,
 /*
  * TIF_SME controls whether a task can use SME without trapping while
  * in userspace, when TIF_SME is set then we must have storage
- * alocated in sve_state and sme_state to store the contents of both ZA
+ * allocated in sve_state and sme_state to store the contents of both ZA
  * and the SVE registers for both streaming and non-streaming modes.
  *
  * If both SVCR.ZA and SVCR.SM are disabled then at any point we
@@ -1477,7 +1477,7 @@ void do_sve_acc(unsigned long esr, struct pt_regs *regs)
  *
  * TIF_SME should be clear on entry: otherwise, fpsimd_restore_current_state()
  * would have disabled the SME access trap for userspace during
- * ret_to_user, making an SVE access trap impossible in that case.
+ * ret_to_user, making an SME access trap impossible in that case.
  */
 void do_sme_acc(unsigned long esr, struct pt_regs *regs)
 {
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index 5545fe1a9012..432626c866a8 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -195,15 +195,22 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	return ftrace_modify_code(pc, 0, new, false);
 }
 
-static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr)
+static struct plt_entry *get_ftrace_plt(struct module *mod)
 {
 #ifdef CONFIG_ARM64_MODULE_PLTS
 	struct plt_entry *plt = mod->arch.ftrace_trampolines;
 
-	if (addr == FTRACE_ADDR)
-		return &plt[FTRACE_PLT_IDX];
-#endif
+	return &plt[FTRACE_PLT_IDX];
+#else
 	return NULL;
+#endif
+}
+
+static bool reachable_by_bl(unsigned long addr, unsigned long pc)
+{
+	long offset = (long)addr - (long)pc;
+
+	return offset >= -SZ_128M && offset < SZ_128M;
 }
 
 /*
@@ -220,14 +227,21 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec,
 				      unsigned long *addr)
 {
 	unsigned long pc = rec->ip;
-	long offset = (long)*addr - (long)pc;
 	struct plt_entry *plt;
 
 	/*
+	 * If a custom trampoline is unreachable, rely on the ftrace_caller
+	 * trampoline which knows how to indirectly reach that trampoline
+	 * through ops->direct_call.
+	 */
+	if (*addr != FTRACE_ADDR && !reachable_by_bl(*addr, pc))
+		*addr = FTRACE_ADDR;
+
+	/*
 	 * When the target is within range of the 'BL' instruction, use 'addr'
 	 * as-is and branch to that directly.
 	 */
-	if (offset >= -SZ_128M && offset < SZ_128M)
+	if (reachable_by_bl(*addr, pc))
 		return true;
 
 	/*
@@ -256,7 +270,7 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec,
 	if (WARN_ON(!mod))
 		return false;
 
-	plt = get_ftrace_plt(mod, *addr);
+	plt = get_ftrace_plt(mod);
 	if (!plt) {
 		pr_err("ftrace: no module PLT for %ps\n", (void *)*addr);
 		return false;
@@ -330,12 +344,24 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 		       unsigned long addr)
 {
-	if (WARN_ON_ONCE(old_addr != (unsigned long)ftrace_caller))
+	unsigned long pc = rec->ip;
+	u32 old, new;
+	int ret;
+
+	ret = ftrace_rec_set_ops(rec, arm64_rec_get_ops(rec));
+	if (ret)
+		return ret;
+
+	if (!ftrace_find_callable_addr(rec, NULL, &old_addr))
 		return -EINVAL;
-	if (WARN_ON_ONCE(addr != (unsigned long)ftrace_caller))
+	if (!ftrace_find_callable_addr(rec, NULL, &addr))
 		return -EINVAL;
 
-	return ftrace_rec_update_ops(rec);
+	old = aarch64_insn_gen_branch_imm(pc, old_addr,
+					  AARCH64_INSN_BRANCH_LINK);
+	new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
+
+	return ftrace_modify_code(pc, old, new, true);
 }
 #endif
 
diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c
index d833d78a7f31..370ab84fd06e 100644
--- a/arch/arm64/kernel/idreg-override.c
+++ b/arch/arm64/kernel/idreg-override.c
@@ -167,7 +167,7 @@ static const struct {
 } aliases[] __initconst = {
 	{ "kvm-arm.mode=nvhe",		"id_aa64mmfr1.vh=0" },
 	{ "kvm-arm.mode=protected",	"id_aa64mmfr1.vh=0" },
-	{ "arm64.nosve",		"id_aa64pfr0.sve=0 id_aa64pfr1.sme=0" },
+	{ "arm64.nosve",		"id_aa64pfr0.sve=0" },
 	{ "arm64.nosme",		"id_aa64pfr1.sme=0" },
 	{ "arm64.nobti",		"id_aa64pfr1.bt=0" },
 	{ "arm64.nopauth",
@@ -178,6 +178,13 @@ static const struct {
 	{ "nokaslr",			"kaslr.disabled=1" },
 };
 
+static int __init parse_nokaslr(char *unused)
+{
+	/* nokaslr param handling is done by early cpufeature code */
+	return 0;
+}
+early_param("nokaslr", parse_nokaslr);
+
 static int __init find_field(const char *cmdline,
 			     const struct ftr_set_desc *reg, int f, u64 *v)
 {
diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
index cda9c1e9864f..4e1f983df3d1 100644
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -224,6 +224,8 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
 		 */
 		if (!kernel_active_single_step())
 			kernel_enable_single_step(linux_regs);
+		else
+			kernel_rewind_single_step(linux_regs);
 		err = 0;
 		break;
 	default:
diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
index ce3d40120f72..078910db77a4 100644
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/kexec.h>
 #include <linux/page-flags.h>
+#include <linux/reboot.h>
 #include <linux/set_memory.h>
 #include <linux/smp.h>
 
@@ -102,7 +103,7 @@ static void kexec_segment_flush(const struct kimage *kimage)
 /* Allocates pages for kexec page table */
 static void *kexec_page_alloc(void *arg)
 {
-	struct kimage *kimage = (struct kimage *)arg;
+	struct kimage *kimage = arg;
 	struct page *page = kimage_alloc_control_pages(kimage, 0);
 	void *vaddr = NULL;
 
@@ -268,26 +269,6 @@ void machine_crash_shutdown(struct pt_regs *regs)
 	pr_info("Starting crashdump kernel...\n");
 }
 
-void arch_kexec_protect_crashkres(void)
-{
-	int i;
-
-	for (i = 0; i < kexec_crash_image->nr_segments; i++)
-		set_memory_valid(
-			__phys_to_virt(kexec_crash_image->segment[i].mem),
-			kexec_crash_image->segment[i].memsz >> PAGE_SHIFT, 0);
-}
-
-void arch_kexec_unprotect_crashkres(void)
-{
-	int i;
-
-	for (i = 0; i < kexec_crash_image->nr_segments; i++)
-		set_memory_valid(
-			__phys_to_virt(kexec_crash_image->segment[i].mem),
-			kexec_crash_image->segment[i].memsz >> PAGE_SHIFT, 1);
-}
-
 #ifdef CONFIG_HIBERNATION
 /*
  * To preserve the crash dump kernel image, the relevant memory segments
diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c
index 5a0a8f552a61..543493bf924d 100644
--- a/arch/arm64/kernel/module-plts.c
+++ b/arch/arm64/kernel/module-plts.c
@@ -65,17 +65,12 @@ static bool plt_entries_equal(const struct plt_entry *a,
 	       (q + aarch64_insn_adrp_get_offset(le32_to_cpu(b->adrp)));
 }
 
-static bool in_init(const struct module *mod, void *loc)
-{
-	return (u64)loc - (u64)mod->init_layout.base < mod->init_layout.size;
-}
-
 u64 module_emit_plt_entry(struct module *mod, Elf64_Shdr *sechdrs,
 			  void *loc, const Elf64_Rela *rela,
 			  Elf64_Sym *sym)
 {
-	struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core :
-							  &mod->arch.init;
+	struct mod_plt_sec *pltsec = !within_module_init((unsigned long)loc, mod) ?
+						&mod->arch.core : &mod->arch.init;
 	struct plt_entry *plt = (struct plt_entry *)sechdrs[pltsec->plt_shndx].sh_addr;
 	int i = pltsec->plt_num_entries;
 	int j = i - 1;
@@ -105,8 +100,8 @@ u64 module_emit_plt_entry(struct module *mod, Elf64_Shdr *sechdrs,
 u64 module_emit_veneer_for_adrp(struct module *mod, Elf64_Shdr *sechdrs,
 				void *loc, u64 val)
 {
-	struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core :
-							  &mod->arch.init;
+	struct mod_plt_sec *pltsec = !within_module_init((unsigned long)loc, mod) ?
+						&mod->arch.core : &mod->arch.init;
 	struct plt_entry *plt = (struct plt_entry *)sechdrs[pltsec->plt_shndx].sh_addr;
 	int i = pltsec->plt_num_entries++;
 	u32 br;
diff --git a/arch/arm64/kernel/perf_callchain.c b/arch/arm64/kernel/perf_callchain.c
index 65b196e3ca6c..6d157f32187b 100644
--- a/arch/arm64/kernel/perf_callchain.c
+++ b/arch/arm64/kernel/perf_callchain.c
@@ -38,7 +38,7 @@ user_backtrace(struct frame_tail __user *tail,
 	if (err)
 		return NULL;
 
-	lr = ptrauth_strip_insn_pac(buftail.lr);
+	lr = ptrauth_strip_user_insn_pac(buftail.lr);
 
 	perf_callchain_store(entry, lr);
 
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
deleted file mode 100644
index dde06c0f97f3..000000000000
--- a/arch/arm64/kernel/perf_event.c
+++ /dev/null
@@ -1,1467 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * ARMv8 PMUv3 Performance Events handling code.
- *
- * Copyright (C) 2012 ARM Limited
- * Author: Will Deacon <will.deacon@arm.com>
- *
- * This code is based heavily on the ARMv7 perf event code.
- */
-
-#include <asm/irq_regs.h>
-#include <asm/perf_event.h>
-#include <asm/sysreg.h>
-#include <asm/virt.h>
-
-#include <clocksource/arm_arch_timer.h>
-
-#include <linux/acpi.h>
-#include <linux/clocksource.h>
-#include <linux/kvm_host.h>
-#include <linux/of.h>
-#include <linux/perf/arm_pmu.h>
-#include <linux/platform_device.h>
-#include <linux/sched_clock.h>
-#include <linux/smp.h>
-
-/* ARMv8 Cortex-A53 specific event types. */
-#define ARMV8_A53_PERFCTR_PREF_LINEFILL				0xC2
-
-/* ARMv8 Cavium ThunderX specific event types. */
-#define ARMV8_THUNDER_PERFCTR_L1D_CACHE_MISS_ST			0xE9
-#define ARMV8_THUNDER_PERFCTR_L1D_CACHE_PREF_ACCESS		0xEA
-#define ARMV8_THUNDER_PERFCTR_L1D_CACHE_PREF_MISS		0xEB
-#define ARMV8_THUNDER_PERFCTR_L1I_CACHE_PREF_ACCESS		0xEC
-#define ARMV8_THUNDER_PERFCTR_L1I_CACHE_PREF_MISS		0xED
-
-/*
- * ARMv8 Architectural defined events, not all of these may
- * be supported on any given implementation. Unsupported events will
- * be disabled at run-time based on the PMCEID registers.
- */
-static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV8_PMUV3_PERFCTR_INST_RETIRED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV8_PMUV3_PERFCTR_L1D_CACHE,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV8_PMUV3_PERFCTR_BR_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV8_PMUV3_PERFCTR_BUS_CYCLES,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV8_PMUV3_PERFCTR_STALL_FRONTEND,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV8_PMUV3_PERFCTR_STALL_BACKEND,
-};
-
-static const unsigned armv8_pmuv3_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-						[PERF_COUNT_HW_CACHE_OP_MAX]
-						[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1D_CACHE,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1I_CACHE,
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL,
-	[C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1D_TLB,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL,
-	[C(ITLB)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1I_TLB,
-
-	[C(LL)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD,
-	[C(LL)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_LL_CACHE_RD,
-
-	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_BR_PRED,
-	[C(BPU)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_BR_MIS_PRED,
-};
-
-static const unsigned armv8_a53_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					      [PERF_COUNT_HW_CACHE_OP_MAX]
-					      [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV8_A53_PERFCTR_PREF_LINEFILL,
-
-	[C(NODE)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_RD,
-	[C(NODE)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_WR,
-};
-
-static const unsigned armv8_a57_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					      [PERF_COUNT_HW_CACHE_OP_MAX]
-					      [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_RD,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_WR,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_RD,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_WR,
-
-	[C(NODE)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_RD,
-	[C(NODE)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_WR,
-};
-
-static const unsigned armv8_a73_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					      [PERF_COUNT_HW_CACHE_OP_MAX]
-					      [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR,
-};
-
-static const unsigned armv8_thunder_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-						   [PERF_COUNT_HW_CACHE_OP_MAX]
-						   [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_RD,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_THUNDER_PERFCTR_L1D_CACHE_MISS_ST,
-	[C(L1D)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV8_THUNDER_PERFCTR_L1D_CACHE_PREF_ACCESS,
-	[C(L1D)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV8_THUNDER_PERFCTR_L1D_CACHE_PREF_MISS,
-
-	[C(L1I)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV8_THUNDER_PERFCTR_L1I_CACHE_PREF_ACCESS,
-	[C(L1I)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV8_THUNDER_PERFCTR_L1I_CACHE_PREF_MISS,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1D_TLB_RD,
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_RD,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_WR,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_WR,
-};
-
-static const unsigned armv8_vulcan_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					      [PERF_COUNT_HW_CACHE_OP_MAX]
-					      [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_RD,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_WR,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1D_TLB_RD,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_L1D_TLB_WR,
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_RD,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_WR,
-
-	[C(NODE)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_RD,
-	[C(NODE)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_WR,
-};
-
-static ssize_t
-armv8pmu_events_sysfs_show(struct device *dev,
-			   struct device_attribute *attr, char *page)
-{
-	struct perf_pmu_events_attr *pmu_attr;
-
-	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
-
-	return sprintf(page, "event=0x%04llx\n", pmu_attr->id);
-}
-
-#define ARMV8_EVENT_ATTR(name, config)						\
-	PMU_EVENT_ATTR_ID(name, armv8pmu_events_sysfs_show, config)
-
-static struct attribute *armv8_pmuv3_event_attrs[] = {
-	ARMV8_EVENT_ATTR(sw_incr, ARMV8_PMUV3_PERFCTR_SW_INCR),
-	ARMV8_EVENT_ATTR(l1i_cache_refill, ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL),
-	ARMV8_EVENT_ATTR(l1i_tlb_refill, ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL),
-	ARMV8_EVENT_ATTR(l1d_cache_refill, ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL),
-	ARMV8_EVENT_ATTR(l1d_cache, ARMV8_PMUV3_PERFCTR_L1D_CACHE),
-	ARMV8_EVENT_ATTR(l1d_tlb_refill, ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL),
-	ARMV8_EVENT_ATTR(ld_retired, ARMV8_PMUV3_PERFCTR_LD_RETIRED),
-	ARMV8_EVENT_ATTR(st_retired, ARMV8_PMUV3_PERFCTR_ST_RETIRED),
-	ARMV8_EVENT_ATTR(inst_retired, ARMV8_PMUV3_PERFCTR_INST_RETIRED),
-	ARMV8_EVENT_ATTR(exc_taken, ARMV8_PMUV3_PERFCTR_EXC_TAKEN),
-	ARMV8_EVENT_ATTR(exc_return, ARMV8_PMUV3_PERFCTR_EXC_RETURN),
-	ARMV8_EVENT_ATTR(cid_write_retired, ARMV8_PMUV3_PERFCTR_CID_WRITE_RETIRED),
-	ARMV8_EVENT_ATTR(pc_write_retired, ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED),
-	ARMV8_EVENT_ATTR(br_immed_retired, ARMV8_PMUV3_PERFCTR_BR_IMMED_RETIRED),
-	ARMV8_EVENT_ATTR(br_return_retired, ARMV8_PMUV3_PERFCTR_BR_RETURN_RETIRED),
-	ARMV8_EVENT_ATTR(unaligned_ldst_retired, ARMV8_PMUV3_PERFCTR_UNALIGNED_LDST_RETIRED),
-	ARMV8_EVENT_ATTR(br_mis_pred, ARMV8_PMUV3_PERFCTR_BR_MIS_PRED),
-	ARMV8_EVENT_ATTR(cpu_cycles, ARMV8_PMUV3_PERFCTR_CPU_CYCLES),
-	ARMV8_EVENT_ATTR(br_pred, ARMV8_PMUV3_PERFCTR_BR_PRED),
-	ARMV8_EVENT_ATTR(mem_access, ARMV8_PMUV3_PERFCTR_MEM_ACCESS),
-	ARMV8_EVENT_ATTR(l1i_cache, ARMV8_PMUV3_PERFCTR_L1I_CACHE),
-	ARMV8_EVENT_ATTR(l1d_cache_wb, ARMV8_PMUV3_PERFCTR_L1D_CACHE_WB),
-	ARMV8_EVENT_ATTR(l2d_cache, ARMV8_PMUV3_PERFCTR_L2D_CACHE),
-	ARMV8_EVENT_ATTR(l2d_cache_refill, ARMV8_PMUV3_PERFCTR_L2D_CACHE_REFILL),
-	ARMV8_EVENT_ATTR(l2d_cache_wb, ARMV8_PMUV3_PERFCTR_L2D_CACHE_WB),
-	ARMV8_EVENT_ATTR(bus_access, ARMV8_PMUV3_PERFCTR_BUS_ACCESS),
-	ARMV8_EVENT_ATTR(memory_error, ARMV8_PMUV3_PERFCTR_MEMORY_ERROR),
-	ARMV8_EVENT_ATTR(inst_spec, ARMV8_PMUV3_PERFCTR_INST_SPEC),
-	ARMV8_EVENT_ATTR(ttbr_write_retired, ARMV8_PMUV3_PERFCTR_TTBR_WRITE_RETIRED),
-	ARMV8_EVENT_ATTR(bus_cycles, ARMV8_PMUV3_PERFCTR_BUS_CYCLES),
-	/* Don't expose the chain event in /sys, since it's useless in isolation */
-	ARMV8_EVENT_ATTR(l1d_cache_allocate, ARMV8_PMUV3_PERFCTR_L1D_CACHE_ALLOCATE),
-	ARMV8_EVENT_ATTR(l2d_cache_allocate, ARMV8_PMUV3_PERFCTR_L2D_CACHE_ALLOCATE),
-	ARMV8_EVENT_ATTR(br_retired, ARMV8_PMUV3_PERFCTR_BR_RETIRED),
-	ARMV8_EVENT_ATTR(br_mis_pred_retired, ARMV8_PMUV3_PERFCTR_BR_MIS_PRED_RETIRED),
-	ARMV8_EVENT_ATTR(stall_frontend, ARMV8_PMUV3_PERFCTR_STALL_FRONTEND),
-	ARMV8_EVENT_ATTR(stall_backend, ARMV8_PMUV3_PERFCTR_STALL_BACKEND),
-	ARMV8_EVENT_ATTR(l1d_tlb, ARMV8_PMUV3_PERFCTR_L1D_TLB),
-	ARMV8_EVENT_ATTR(l1i_tlb, ARMV8_PMUV3_PERFCTR_L1I_TLB),
-	ARMV8_EVENT_ATTR(l2i_cache, ARMV8_PMUV3_PERFCTR_L2I_CACHE),
-	ARMV8_EVENT_ATTR(l2i_cache_refill, ARMV8_PMUV3_PERFCTR_L2I_CACHE_REFILL),
-	ARMV8_EVENT_ATTR(l3d_cache_allocate, ARMV8_PMUV3_PERFCTR_L3D_CACHE_ALLOCATE),
-	ARMV8_EVENT_ATTR(l3d_cache_refill, ARMV8_PMUV3_PERFCTR_L3D_CACHE_REFILL),
-	ARMV8_EVENT_ATTR(l3d_cache, ARMV8_PMUV3_PERFCTR_L3D_CACHE),
-	ARMV8_EVENT_ATTR(l3d_cache_wb, ARMV8_PMUV3_PERFCTR_L3D_CACHE_WB),
-	ARMV8_EVENT_ATTR(l2d_tlb_refill, ARMV8_PMUV3_PERFCTR_L2D_TLB_REFILL),
-	ARMV8_EVENT_ATTR(l2i_tlb_refill, ARMV8_PMUV3_PERFCTR_L2I_TLB_REFILL),
-	ARMV8_EVENT_ATTR(l2d_tlb, ARMV8_PMUV3_PERFCTR_L2D_TLB),
-	ARMV8_EVENT_ATTR(l2i_tlb, ARMV8_PMUV3_PERFCTR_L2I_TLB),
-	ARMV8_EVENT_ATTR(remote_access, ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS),
-	ARMV8_EVENT_ATTR(ll_cache, ARMV8_PMUV3_PERFCTR_LL_CACHE),
-	ARMV8_EVENT_ATTR(ll_cache_miss, ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS),
-	ARMV8_EVENT_ATTR(dtlb_walk, ARMV8_PMUV3_PERFCTR_DTLB_WALK),
-	ARMV8_EVENT_ATTR(itlb_walk, ARMV8_PMUV3_PERFCTR_ITLB_WALK),
-	ARMV8_EVENT_ATTR(ll_cache_rd, ARMV8_PMUV3_PERFCTR_LL_CACHE_RD),
-	ARMV8_EVENT_ATTR(ll_cache_miss_rd, ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD),
-	ARMV8_EVENT_ATTR(remote_access_rd, ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS_RD),
-	ARMV8_EVENT_ATTR(l1d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L1D_CACHE_LMISS_RD),
-	ARMV8_EVENT_ATTR(op_retired, ARMV8_PMUV3_PERFCTR_OP_RETIRED),
-	ARMV8_EVENT_ATTR(op_spec, ARMV8_PMUV3_PERFCTR_OP_SPEC),
-	ARMV8_EVENT_ATTR(stall, ARMV8_PMUV3_PERFCTR_STALL),
-	ARMV8_EVENT_ATTR(stall_slot_backend, ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND),
-	ARMV8_EVENT_ATTR(stall_slot_frontend, ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND),
-	ARMV8_EVENT_ATTR(stall_slot, ARMV8_PMUV3_PERFCTR_STALL_SLOT),
-	ARMV8_EVENT_ATTR(sample_pop, ARMV8_SPE_PERFCTR_SAMPLE_POP),
-	ARMV8_EVENT_ATTR(sample_feed, ARMV8_SPE_PERFCTR_SAMPLE_FEED),
-	ARMV8_EVENT_ATTR(sample_filtrate, ARMV8_SPE_PERFCTR_SAMPLE_FILTRATE),
-	ARMV8_EVENT_ATTR(sample_collision, ARMV8_SPE_PERFCTR_SAMPLE_COLLISION),
-	ARMV8_EVENT_ATTR(cnt_cycles, ARMV8_AMU_PERFCTR_CNT_CYCLES),
-	ARMV8_EVENT_ATTR(stall_backend_mem, ARMV8_AMU_PERFCTR_STALL_BACKEND_MEM),
-	ARMV8_EVENT_ATTR(l1i_cache_lmiss, ARMV8_PMUV3_PERFCTR_L1I_CACHE_LMISS),
-	ARMV8_EVENT_ATTR(l2d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L2D_CACHE_LMISS_RD),
-	ARMV8_EVENT_ATTR(l2i_cache_lmiss, ARMV8_PMUV3_PERFCTR_L2I_CACHE_LMISS),
-	ARMV8_EVENT_ATTR(l3d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L3D_CACHE_LMISS_RD),
-	ARMV8_EVENT_ATTR(trb_wrap, ARMV8_PMUV3_PERFCTR_TRB_WRAP),
-	ARMV8_EVENT_ATTR(trb_trig, ARMV8_PMUV3_PERFCTR_TRB_TRIG),
-	ARMV8_EVENT_ATTR(trcextout0, ARMV8_PMUV3_PERFCTR_TRCEXTOUT0),
-	ARMV8_EVENT_ATTR(trcextout1, ARMV8_PMUV3_PERFCTR_TRCEXTOUT1),
-	ARMV8_EVENT_ATTR(trcextout2, ARMV8_PMUV3_PERFCTR_TRCEXTOUT2),
-	ARMV8_EVENT_ATTR(trcextout3, ARMV8_PMUV3_PERFCTR_TRCEXTOUT3),
-	ARMV8_EVENT_ATTR(cti_trigout4, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT4),
-	ARMV8_EVENT_ATTR(cti_trigout5, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT5),
-	ARMV8_EVENT_ATTR(cti_trigout6, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT6),
-	ARMV8_EVENT_ATTR(cti_trigout7, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT7),
-	ARMV8_EVENT_ATTR(ldst_align_lat, ARMV8_PMUV3_PERFCTR_LDST_ALIGN_LAT),
-	ARMV8_EVENT_ATTR(ld_align_lat, ARMV8_PMUV3_PERFCTR_LD_ALIGN_LAT),
-	ARMV8_EVENT_ATTR(st_align_lat, ARMV8_PMUV3_PERFCTR_ST_ALIGN_LAT),
-	ARMV8_EVENT_ATTR(mem_access_checked, ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED),
-	ARMV8_EVENT_ATTR(mem_access_checked_rd, ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_RD),
-	ARMV8_EVENT_ATTR(mem_access_checked_wr, ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_WR),
-	NULL,
-};
-
-static umode_t
-armv8pmu_event_attr_is_visible(struct kobject *kobj,
-			       struct attribute *attr, int unused)
-{
-	struct device *dev = kobj_to_dev(kobj);
-	struct pmu *pmu = dev_get_drvdata(dev);
-	struct arm_pmu *cpu_pmu = container_of(pmu, struct arm_pmu, pmu);
-	struct perf_pmu_events_attr *pmu_attr;
-
-	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr.attr);
-
-	if (pmu_attr->id < ARMV8_PMUV3_MAX_COMMON_EVENTS &&
-	    test_bit(pmu_attr->id, cpu_pmu->pmceid_bitmap))
-		return attr->mode;
-
-	if (pmu_attr->id >= ARMV8_PMUV3_EXT_COMMON_EVENT_BASE) {
-		u64 id = pmu_attr->id - ARMV8_PMUV3_EXT_COMMON_EVENT_BASE;
-
-		if (id < ARMV8_PMUV3_MAX_COMMON_EVENTS &&
-		    test_bit(id, cpu_pmu->pmceid_ext_bitmap))
-			return attr->mode;
-	}
-
-	return 0;
-}
-
-static const struct attribute_group armv8_pmuv3_events_attr_group = {
-	.name = "events",
-	.attrs = armv8_pmuv3_event_attrs,
-	.is_visible = armv8pmu_event_attr_is_visible,
-};
-
-PMU_FORMAT_ATTR(event, "config:0-15");
-PMU_FORMAT_ATTR(long, "config1:0");
-PMU_FORMAT_ATTR(rdpmc, "config1:1");
-
-static int sysctl_perf_user_access __read_mostly;
-
-static inline bool armv8pmu_event_is_64bit(struct perf_event *event)
-{
-	return event->attr.config1 & 0x1;
-}
-
-static inline bool armv8pmu_event_want_user_access(struct perf_event *event)
-{
-	return event->attr.config1 & 0x2;
-}
-
-static struct attribute *armv8_pmuv3_format_attrs[] = {
-	&format_attr_event.attr,
-	&format_attr_long.attr,
-	&format_attr_rdpmc.attr,
-	NULL,
-};
-
-static const struct attribute_group armv8_pmuv3_format_attr_group = {
-	.name = "format",
-	.attrs = armv8_pmuv3_format_attrs,
-};
-
-static ssize_t slots_show(struct device *dev, struct device_attribute *attr,
-			  char *page)
-{
-	struct pmu *pmu = dev_get_drvdata(dev);
-	struct arm_pmu *cpu_pmu = container_of(pmu, struct arm_pmu, pmu);
-	u32 slots = cpu_pmu->reg_pmmir & ARMV8_PMU_SLOTS_MASK;
-
-	return sysfs_emit(page, "0x%08x\n", slots);
-}
-
-static DEVICE_ATTR_RO(slots);
-
-static ssize_t bus_slots_show(struct device *dev, struct device_attribute *attr,
-			      char *page)
-{
-	struct pmu *pmu = dev_get_drvdata(dev);
-	struct arm_pmu *cpu_pmu = container_of(pmu, struct arm_pmu, pmu);
-	u32 bus_slots = (cpu_pmu->reg_pmmir >> ARMV8_PMU_BUS_SLOTS_SHIFT)
-			& ARMV8_PMU_BUS_SLOTS_MASK;
-
-	return sysfs_emit(page, "0x%08x\n", bus_slots);
-}
-
-static DEVICE_ATTR_RO(bus_slots);
-
-static ssize_t bus_width_show(struct device *dev, struct device_attribute *attr,
-			      char *page)
-{
-	struct pmu *pmu = dev_get_drvdata(dev);
-	struct arm_pmu *cpu_pmu = container_of(pmu, struct arm_pmu, pmu);
-	u32 bus_width = (cpu_pmu->reg_pmmir >> ARMV8_PMU_BUS_WIDTH_SHIFT)
-			& ARMV8_PMU_BUS_WIDTH_MASK;
-	u32 val = 0;
-
-	/* Encoded as Log2(number of bytes), plus one */
-	if (bus_width > 2 && bus_width < 13)
-		val = 1 << (bus_width - 1);
-
-	return sysfs_emit(page, "0x%08x\n", val);
-}
-
-static DEVICE_ATTR_RO(bus_width);
-
-static struct attribute *armv8_pmuv3_caps_attrs[] = {
-	&dev_attr_slots.attr,
-	&dev_attr_bus_slots.attr,
-	&dev_attr_bus_width.attr,
-	NULL,
-};
-
-static const struct attribute_group armv8_pmuv3_caps_attr_group = {
-	.name = "caps",
-	.attrs = armv8_pmuv3_caps_attrs,
-};
-
-/*
- * Perf Events' indices
- */
-#define	ARMV8_IDX_CYCLE_COUNTER	0
-#define	ARMV8_IDX_COUNTER0	1
-#define	ARMV8_IDX_CYCLE_COUNTER_USER	32
-
-/*
- * We unconditionally enable ARMv8.5-PMU long event counter support
- * (64-bit events) where supported. Indicate if this arm_pmu has long
- * event counter support.
- */
-static bool armv8pmu_has_long_event(struct arm_pmu *cpu_pmu)
-{
-	return (cpu_pmu->pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P5);
-}
-
-static inline bool armv8pmu_event_has_user_read(struct perf_event *event)
-{
-	return event->hw.flags & PERF_EVENT_FLAG_USER_READ_CNT;
-}
-
-/*
- * We must chain two programmable counters for 64 bit events,
- * except when we have allocated the 64bit cycle counter (for CPU
- * cycles event) or when user space counter access is enabled.
- */
-static inline bool armv8pmu_event_is_chained(struct perf_event *event)
-{
-	int idx = event->hw.idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-
-	return !armv8pmu_event_has_user_read(event) &&
-	       armv8pmu_event_is_64bit(event) &&
-	       !armv8pmu_has_long_event(cpu_pmu) &&
-	       (idx != ARMV8_IDX_CYCLE_COUNTER);
-}
-
-/*
- * ARMv8 low level PMU access
- */
-
-/*
- * Perf Event to low level counters mapping
- */
-#define	ARMV8_IDX_TO_COUNTER(x)	\
-	(((x) - ARMV8_IDX_COUNTER0) & ARMV8_PMU_COUNTER_MASK)
-
-/*
- * This code is really good
- */
-
-#define PMEVN_CASE(n, case_macro) \
-	case n: case_macro(n); break
-
-#define PMEVN_SWITCH(x, case_macro)				\
-	do {							\
-		switch (x) {					\
-		PMEVN_CASE(0,  case_macro);			\
-		PMEVN_CASE(1,  case_macro);			\
-		PMEVN_CASE(2,  case_macro);			\
-		PMEVN_CASE(3,  case_macro);			\
-		PMEVN_CASE(4,  case_macro);			\
-		PMEVN_CASE(5,  case_macro);			\
-		PMEVN_CASE(6,  case_macro);			\
-		PMEVN_CASE(7,  case_macro);			\
-		PMEVN_CASE(8,  case_macro);			\
-		PMEVN_CASE(9,  case_macro);			\
-		PMEVN_CASE(10, case_macro);			\
-		PMEVN_CASE(11, case_macro);			\
-		PMEVN_CASE(12, case_macro);			\
-		PMEVN_CASE(13, case_macro);			\
-		PMEVN_CASE(14, case_macro);			\
-		PMEVN_CASE(15, case_macro);			\
-		PMEVN_CASE(16, case_macro);			\
-		PMEVN_CASE(17, case_macro);			\
-		PMEVN_CASE(18, case_macro);			\
-		PMEVN_CASE(19, case_macro);			\
-		PMEVN_CASE(20, case_macro);			\
-		PMEVN_CASE(21, case_macro);			\
-		PMEVN_CASE(22, case_macro);			\
-		PMEVN_CASE(23, case_macro);			\
-		PMEVN_CASE(24, case_macro);			\
-		PMEVN_CASE(25, case_macro);			\
-		PMEVN_CASE(26, case_macro);			\
-		PMEVN_CASE(27, case_macro);			\
-		PMEVN_CASE(28, case_macro);			\
-		PMEVN_CASE(29, case_macro);			\
-		PMEVN_CASE(30, case_macro);			\
-		default: WARN(1, "Invalid PMEV* index\n");	\
-		}						\
-	} while (0)
-
-#define RETURN_READ_PMEVCNTRN(n) \
-	return read_sysreg(pmevcntr##n##_el0)
-static unsigned long read_pmevcntrn(int n)
-{
-	PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN);
-	return 0;
-}
-
-#define WRITE_PMEVCNTRN(n) \
-	write_sysreg(val, pmevcntr##n##_el0)
-static void write_pmevcntrn(int n, unsigned long val)
-{
-	PMEVN_SWITCH(n, WRITE_PMEVCNTRN);
-}
-
-#define WRITE_PMEVTYPERN(n) \
-	write_sysreg(val, pmevtyper##n##_el0)
-static void write_pmevtypern(int n, unsigned long val)
-{
-	PMEVN_SWITCH(n, WRITE_PMEVTYPERN);
-}
-
-static inline u32 armv8pmu_pmcr_read(void)
-{
-	return read_sysreg(pmcr_el0);
-}
-
-static inline void armv8pmu_pmcr_write(u32 val)
-{
-	val &= ARMV8_PMU_PMCR_MASK;
-	isb();
-	write_sysreg(val, pmcr_el0);
-}
-
-static inline int armv8pmu_has_overflowed(u32 pmovsr)
-{
-	return pmovsr & ARMV8_PMU_OVERFLOWED_MASK;
-}
-
-static inline int armv8pmu_counter_has_overflowed(u32 pmnc, int idx)
-{
-	return pmnc & BIT(ARMV8_IDX_TO_COUNTER(idx));
-}
-
-static inline u64 armv8pmu_read_evcntr(int idx)
-{
-	u32 counter = ARMV8_IDX_TO_COUNTER(idx);
-
-	return read_pmevcntrn(counter);
-}
-
-static inline u64 armv8pmu_read_hw_counter(struct perf_event *event)
-{
-	int idx = event->hw.idx;
-	u64 val = armv8pmu_read_evcntr(idx);
-
-	if (armv8pmu_event_is_chained(event))
-		val = (val << 32) | armv8pmu_read_evcntr(idx - 1);
-	return val;
-}
-
-/*
- * The cycle counter is always a 64-bit counter. When ARMV8_PMU_PMCR_LP
- * is set the event counters also become 64-bit counters. Unless the
- * user has requested a long counter (attr.config1) then we want to
- * interrupt upon 32-bit overflow - we achieve this by applying a bias.
- */
-static bool armv8pmu_event_needs_bias(struct perf_event *event)
-{
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	if (armv8pmu_event_is_64bit(event))
-		return false;
-
-	if (armv8pmu_has_long_event(cpu_pmu) ||
-	    idx == ARMV8_IDX_CYCLE_COUNTER)
-		return true;
-
-	return false;
-}
-
-static u64 armv8pmu_bias_long_counter(struct perf_event *event, u64 value)
-{
-	if (armv8pmu_event_needs_bias(event))
-		value |= GENMASK(63, 32);
-
-	return value;
-}
-
-static u64 armv8pmu_unbias_long_counter(struct perf_event *event, u64 value)
-{
-	if (armv8pmu_event_needs_bias(event))
-		value &= ~GENMASK(63, 32);
-
-	return value;
-}
-
-static u64 armv8pmu_read_counter(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-	u64 value;
-
-	if (idx == ARMV8_IDX_CYCLE_COUNTER)
-		value = read_sysreg(pmccntr_el0);
-	else
-		value = armv8pmu_read_hw_counter(event);
-
-	return  armv8pmu_unbias_long_counter(event, value);
-}
-
-static inline void armv8pmu_write_evcntr(int idx, u64 value)
-{
-	u32 counter = ARMV8_IDX_TO_COUNTER(idx);
-
-	write_pmevcntrn(counter, value);
-}
-
-static inline void armv8pmu_write_hw_counter(struct perf_event *event,
-					     u64 value)
-{
-	int idx = event->hw.idx;
-
-	if (armv8pmu_event_is_chained(event)) {
-		armv8pmu_write_evcntr(idx, upper_32_bits(value));
-		armv8pmu_write_evcntr(idx - 1, lower_32_bits(value));
-	} else {
-		armv8pmu_write_evcntr(idx, value);
-	}
-}
-
-static void armv8pmu_write_counter(struct perf_event *event, u64 value)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	value = armv8pmu_bias_long_counter(event, value);
-
-	if (idx == ARMV8_IDX_CYCLE_COUNTER)
-		write_sysreg(value, pmccntr_el0);
-	else
-		armv8pmu_write_hw_counter(event, value);
-}
-
-static inline void armv8pmu_write_evtype(int idx, u32 val)
-{
-	u32 counter = ARMV8_IDX_TO_COUNTER(idx);
-
-	val &= ARMV8_PMU_EVTYPE_MASK;
-	write_pmevtypern(counter, val);
-}
-
-static inline void armv8pmu_write_event_type(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	/*
-	 * For chained events, the low counter is programmed to count
-	 * the event of interest and the high counter is programmed
-	 * with CHAIN event code with filters set to count at all ELs.
-	 */
-	if (armv8pmu_event_is_chained(event)) {
-		u32 chain_evt = ARMV8_PMUV3_PERFCTR_CHAIN |
-				ARMV8_PMU_INCLUDE_EL2;
-
-		armv8pmu_write_evtype(idx - 1, hwc->config_base);
-		armv8pmu_write_evtype(idx, chain_evt);
-	} else {
-		if (idx == ARMV8_IDX_CYCLE_COUNTER)
-			write_sysreg(hwc->config_base, pmccfiltr_el0);
-		else
-			armv8pmu_write_evtype(idx, hwc->config_base);
-	}
-}
-
-static u32 armv8pmu_event_cnten_mask(struct perf_event *event)
-{
-	int counter = ARMV8_IDX_TO_COUNTER(event->hw.idx);
-	u32 mask = BIT(counter);
-
-	if (armv8pmu_event_is_chained(event))
-		mask |= BIT(counter - 1);
-	return mask;
-}
-
-static inline void armv8pmu_enable_counter(u32 mask)
-{
-	/*
-	 * Make sure event configuration register writes are visible before we
-	 * enable the counter.
-	 * */
-	isb();
-	write_sysreg(mask, pmcntenset_el0);
-}
-
-static inline void armv8pmu_enable_event_counter(struct perf_event *event)
-{
-	struct perf_event_attr *attr = &event->attr;
-	u32 mask = armv8pmu_event_cnten_mask(event);
-
-	kvm_set_pmu_events(mask, attr);
-
-	/* We rely on the hypervisor switch code to enable guest counters */
-	if (!kvm_pmu_counter_deferred(attr))
-		armv8pmu_enable_counter(mask);
-}
-
-static inline void armv8pmu_disable_counter(u32 mask)
-{
-	write_sysreg(mask, pmcntenclr_el0);
-	/*
-	 * Make sure the effects of disabling the counter are visible before we
-	 * start configuring the event.
-	 */
-	isb();
-}
-
-static inline void armv8pmu_disable_event_counter(struct perf_event *event)
-{
-	struct perf_event_attr *attr = &event->attr;
-	u32 mask = armv8pmu_event_cnten_mask(event);
-
-	kvm_clr_pmu_events(mask);
-
-	/* We rely on the hypervisor switch code to disable guest counters */
-	if (!kvm_pmu_counter_deferred(attr))
-		armv8pmu_disable_counter(mask);
-}
-
-static inline void armv8pmu_enable_intens(u32 mask)
-{
-	write_sysreg(mask, pmintenset_el1);
-}
-
-static inline void armv8pmu_enable_event_irq(struct perf_event *event)
-{
-	u32 counter = ARMV8_IDX_TO_COUNTER(event->hw.idx);
-	armv8pmu_enable_intens(BIT(counter));
-}
-
-static inline void armv8pmu_disable_intens(u32 mask)
-{
-	write_sysreg(mask, pmintenclr_el1);
-	isb();
-	/* Clear the overflow flag in case an interrupt is pending. */
-	write_sysreg(mask, pmovsclr_el0);
-	isb();
-}
-
-static inline void armv8pmu_disable_event_irq(struct perf_event *event)
-{
-	u32 counter = ARMV8_IDX_TO_COUNTER(event->hw.idx);
-	armv8pmu_disable_intens(BIT(counter));
-}
-
-static inline u32 armv8pmu_getreset_flags(void)
-{
-	u32 value;
-
-	/* Read */
-	value = read_sysreg(pmovsclr_el0);
-
-	/* Write to clear flags */
-	value &= ARMV8_PMU_OVSR_MASK;
-	write_sysreg(value, pmovsclr_el0);
-
-	return value;
-}
-
-static void armv8pmu_disable_user_access(void)
-{
-	write_sysreg(0, pmuserenr_el0);
-}
-
-static void armv8pmu_enable_user_access(struct arm_pmu *cpu_pmu)
-{
-	int i;
-	struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
-
-	/* Clear any unused counters to avoid leaking their contents */
-	for_each_clear_bit(i, cpuc->used_mask, cpu_pmu->num_events) {
-		if (i == ARMV8_IDX_CYCLE_COUNTER)
-			write_sysreg(0, pmccntr_el0);
-		else
-			armv8pmu_write_evcntr(i, 0);
-	}
-
-	write_sysreg(0, pmuserenr_el0);
-	write_sysreg(ARMV8_PMU_USERENR_ER | ARMV8_PMU_USERENR_CR, pmuserenr_el0);
-}
-
-static void armv8pmu_enable_event(struct perf_event *event)
-{
-	/*
-	 * Enable counter and interrupt, and set the counter to count
-	 * the event that we're interested in.
-	 */
-
-	/*
-	 * Disable counter
-	 */
-	armv8pmu_disable_event_counter(event);
-
-	/*
-	 * Set event.
-	 */
-	armv8pmu_write_event_type(event);
-
-	/*
-	 * Enable interrupt for this counter
-	 */
-	armv8pmu_enable_event_irq(event);
-
-	/*
-	 * Enable counter
-	 */
-	armv8pmu_enable_event_counter(event);
-}
-
-static void armv8pmu_disable_event(struct perf_event *event)
-{
-	/*
-	 * Disable counter
-	 */
-	armv8pmu_disable_event_counter(event);
-
-	/*
-	 * Disable interrupt for this counter
-	 */
-	armv8pmu_disable_event_irq(event);
-}
-
-static void armv8pmu_start(struct arm_pmu *cpu_pmu)
-{
-	struct perf_event_context *ctx;
-	int nr_user = 0;
-
-	ctx = perf_cpu_task_ctx();
-	if (ctx)
-		nr_user = ctx->nr_user;
-
-	if (sysctl_perf_user_access && nr_user)
-		armv8pmu_enable_user_access(cpu_pmu);
-	else
-		armv8pmu_disable_user_access();
-
-	/* Enable all counters */
-	armv8pmu_pmcr_write(armv8pmu_pmcr_read() | ARMV8_PMU_PMCR_E);
-}
-
-static void armv8pmu_stop(struct arm_pmu *cpu_pmu)
-{
-	/* Disable all counters */
-	armv8pmu_pmcr_write(armv8pmu_pmcr_read() & ~ARMV8_PMU_PMCR_E);
-}
-
-static irqreturn_t armv8pmu_handle_irq(struct arm_pmu *cpu_pmu)
-{
-	u32 pmovsr;
-	struct perf_sample_data data;
-	struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * Get and reset the IRQ flags
-	 */
-	pmovsr = armv8pmu_getreset_flags();
-
-	/*
-	 * Did an overflow occur?
-	 */
-	if (!armv8pmu_has_overflowed(pmovsr))
-		return IRQ_NONE;
-
-	/*
-	 * Handle the counter(s) overflow(s)
-	 */
-	regs = get_irq_regs();
-
-	/*
-	 * Stop the PMU while processing the counter overflows
-	 * to prevent skews in group events.
-	 */
-	armv8pmu_stop(cpu_pmu);
-	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		/* Ignore if we don't have an event. */
-		if (!event)
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv8pmu_counter_has_overflowed(pmovsr, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event);
-		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (!armpmu_event_set_period(event))
-			continue;
-
-		/*
-		 * Perf event overflow will queue the processing of the event as
-		 * an irq_work which will be taken care of in the handling of
-		 * IPI_IRQ_WORK.
-		 */
-		if (perf_event_overflow(event, &data, regs))
-			cpu_pmu->disable(event);
-	}
-	armv8pmu_start(cpu_pmu);
-
-	return IRQ_HANDLED;
-}
-
-static int armv8pmu_get_single_idx(struct pmu_hw_events *cpuc,
-				    struct arm_pmu *cpu_pmu)
-{
-	int idx;
-
-	for (idx = ARMV8_IDX_COUNTER0; idx < cpu_pmu->num_events; idx++) {
-		if (!test_and_set_bit(idx, cpuc->used_mask))
-			return idx;
-	}
-	return -EAGAIN;
-}
-
-static int armv8pmu_get_chain_idx(struct pmu_hw_events *cpuc,
-				   struct arm_pmu *cpu_pmu)
-{
-	int idx;
-
-	/*
-	 * Chaining requires two consecutive event counters, where
-	 * the lower idx must be even.
-	 */
-	for (idx = ARMV8_IDX_COUNTER0 + 1; idx < cpu_pmu->num_events; idx += 2) {
-		if (!test_and_set_bit(idx, cpuc->used_mask)) {
-			/* Check if the preceding even counter is available */
-			if (!test_and_set_bit(idx - 1, cpuc->used_mask))
-				return idx;
-			/* Release the Odd counter */
-			clear_bit(idx, cpuc->used_mask);
-		}
-	}
-	return -EAGAIN;
-}
-
-static int armv8pmu_get_event_idx(struct pmu_hw_events *cpuc,
-				  struct perf_event *event)
-{
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	unsigned long evtype = hwc->config_base & ARMV8_PMU_EVTYPE_EVENT;
-
-	/* Always prefer to place a cycle counter into the cycle counter. */
-	if (evtype == ARMV8_PMUV3_PERFCTR_CPU_CYCLES) {
-		if (!test_and_set_bit(ARMV8_IDX_CYCLE_COUNTER, cpuc->used_mask))
-			return ARMV8_IDX_CYCLE_COUNTER;
-		else if (armv8pmu_event_is_64bit(event) &&
-			   armv8pmu_event_want_user_access(event) &&
-			   !armv8pmu_has_long_event(cpu_pmu))
-				return -EAGAIN;
-	}
-
-	/*
-	 * Otherwise use events counters
-	 */
-	if (armv8pmu_event_is_chained(event))
-		return	armv8pmu_get_chain_idx(cpuc, cpu_pmu);
-	else
-		return armv8pmu_get_single_idx(cpuc, cpu_pmu);
-}
-
-static void armv8pmu_clear_event_idx(struct pmu_hw_events *cpuc,
-				     struct perf_event *event)
-{
-	int idx = event->hw.idx;
-
-	clear_bit(idx, cpuc->used_mask);
-	if (armv8pmu_event_is_chained(event))
-		clear_bit(idx - 1, cpuc->used_mask);
-}
-
-static int armv8pmu_user_event_idx(struct perf_event *event)
-{
-	if (!sysctl_perf_user_access || !armv8pmu_event_has_user_read(event))
-		return 0;
-
-	/*
-	 * We remap the cycle counter index to 32 to
-	 * match the offset applied to the rest of
-	 * the counter indices.
-	 */
-	if (event->hw.idx == ARMV8_IDX_CYCLE_COUNTER)
-		return ARMV8_IDX_CYCLE_COUNTER_USER;
-
-	return event->hw.idx;
-}
-
-/*
- * Add an event filter to a given event.
- */
-static int armv8pmu_set_event_filter(struct hw_perf_event *event,
-				     struct perf_event_attr *attr)
-{
-	unsigned long config_base = 0;
-
-	if (attr->exclude_idle)
-		return -EPERM;
-
-	/*
-	 * If we're running in hyp mode, then we *are* the hypervisor.
-	 * Therefore we ignore exclude_hv in this configuration, since
-	 * there's no hypervisor to sample anyway. This is consistent
-	 * with other architectures (x86 and Power).
-	 */
-	if (is_kernel_in_hyp_mode()) {
-		if (!attr->exclude_kernel && !attr->exclude_host)
-			config_base |= ARMV8_PMU_INCLUDE_EL2;
-		if (attr->exclude_guest)
-			config_base |= ARMV8_PMU_EXCLUDE_EL1;
-		if (attr->exclude_host)
-			config_base |= ARMV8_PMU_EXCLUDE_EL0;
-	} else {
-		if (!attr->exclude_hv && !attr->exclude_host)
-			config_base |= ARMV8_PMU_INCLUDE_EL2;
-	}
-
-	/*
-	 * Filter out !VHE kernels and guest kernels
-	 */
-	if (attr->exclude_kernel)
-		config_base |= ARMV8_PMU_EXCLUDE_EL1;
-
-	if (attr->exclude_user)
-		config_base |= ARMV8_PMU_EXCLUDE_EL0;
-
-	/*
-	 * Install the filter into config_base as this is used to
-	 * construct the event type.
-	 */
-	event->config_base = config_base;
-
-	return 0;
-}
-
-static void armv8pmu_reset(void *info)
-{
-	struct arm_pmu *cpu_pmu = (struct arm_pmu *)info;
-	u32 pmcr;
-
-	/* The counter and interrupt enable registers are unknown at reset. */
-	armv8pmu_disable_counter(U32_MAX);
-	armv8pmu_disable_intens(U32_MAX);
-
-	/* Clear the counters we flip at guest entry/exit */
-	kvm_clr_pmu_events(U32_MAX);
-
-	/*
-	 * Initialize & Reset PMNC. Request overflow interrupt for
-	 * 64 bit cycle counter but cheat in armv8pmu_write_counter().
-	 */
-	pmcr = ARMV8_PMU_PMCR_P | ARMV8_PMU_PMCR_C | ARMV8_PMU_PMCR_LC;
-
-	/* Enable long event counter support where available */
-	if (armv8pmu_has_long_event(cpu_pmu))
-		pmcr |= ARMV8_PMU_PMCR_LP;
-
-	armv8pmu_pmcr_write(pmcr);
-}
-
-static int __armv8_pmuv3_map_event(struct perf_event *event,
-				   const unsigned (*extra_event_map)
-						  [PERF_COUNT_HW_MAX],
-				   const unsigned (*extra_cache_map)
-						  [PERF_COUNT_HW_CACHE_MAX]
-						  [PERF_COUNT_HW_CACHE_OP_MAX]
-						  [PERF_COUNT_HW_CACHE_RESULT_MAX])
-{
-	int hw_event_id;
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-
-	hw_event_id = armpmu_map_event(event, &armv8_pmuv3_perf_map,
-				       &armv8_pmuv3_perf_cache_map,
-				       ARMV8_PMU_EVTYPE_EVENT);
-
-	/*
-	 * CHAIN events only work when paired with an adjacent counter, and it
-	 * never makes sense for a user to open one in isolation, as they'll be
-	 * rotated arbitrarily.
-	 */
-	if (hw_event_id == ARMV8_PMUV3_PERFCTR_CHAIN)
-		return -EINVAL;
-
-	if (armv8pmu_event_is_64bit(event))
-		event->hw.flags |= ARMPMU_EVT_64BIT;
-
-	/*
-	 * User events must be allocated into a single counter, and so
-	 * must not be chained.
-	 *
-	 * Most 64-bit events require long counter support, but 64-bit
-	 * CPU_CYCLES events can be placed into the dedicated cycle
-	 * counter when this is free.
-	 */
-	if (armv8pmu_event_want_user_access(event)) {
-		if (!(event->attach_state & PERF_ATTACH_TASK))
-			return -EINVAL;
-		if (armv8pmu_event_is_64bit(event) &&
-		    (hw_event_id != ARMV8_PMUV3_PERFCTR_CPU_CYCLES) &&
-		    !armv8pmu_has_long_event(armpmu))
-			return -EOPNOTSUPP;
-
-		event->hw.flags |= PERF_EVENT_FLAG_USER_READ_CNT;
-	}
-
-	/* Only expose micro/arch events supported by this PMU */
-	if ((hw_event_id > 0) && (hw_event_id < ARMV8_PMUV3_MAX_COMMON_EVENTS)
-	    && test_bit(hw_event_id, armpmu->pmceid_bitmap)) {
-		return hw_event_id;
-	}
-
-	return armpmu_map_event(event, extra_event_map, extra_cache_map,
-				ARMV8_PMU_EVTYPE_EVENT);
-}
-
-static int armv8_pmuv3_map_event(struct perf_event *event)
-{
-	return __armv8_pmuv3_map_event(event, NULL, NULL);
-}
-
-static int armv8_a53_map_event(struct perf_event *event)
-{
-	return __armv8_pmuv3_map_event(event, NULL, &armv8_a53_perf_cache_map);
-}
-
-static int armv8_a57_map_event(struct perf_event *event)
-{
-	return __armv8_pmuv3_map_event(event, NULL, &armv8_a57_perf_cache_map);
-}
-
-static int armv8_a73_map_event(struct perf_event *event)
-{
-	return __armv8_pmuv3_map_event(event, NULL, &armv8_a73_perf_cache_map);
-}
-
-static int armv8_thunder_map_event(struct perf_event *event)
-{
-	return __armv8_pmuv3_map_event(event, NULL,
-				       &armv8_thunder_perf_cache_map);
-}
-
-static int armv8_vulcan_map_event(struct perf_event *event)
-{
-	return __armv8_pmuv3_map_event(event, NULL,
-				       &armv8_vulcan_perf_cache_map);
-}
-
-struct armv8pmu_probe_info {
-	struct arm_pmu *pmu;
-	bool present;
-};
-
-static void __armv8pmu_probe_pmu(void *info)
-{
-	struct armv8pmu_probe_info *probe = info;
-	struct arm_pmu *cpu_pmu = probe->pmu;
-	u64 dfr0;
-	u64 pmceid_raw[2];
-	u32 pmceid[2];
-	int pmuver;
-
-	dfr0 = read_sysreg(id_aa64dfr0_el1);
-	pmuver = cpuid_feature_extract_unsigned_field(dfr0,
-			ID_AA64DFR0_EL1_PMUVer_SHIFT);
-	if (pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF ||
-	    pmuver == ID_AA64DFR0_EL1_PMUVer_NI)
-		return;
-
-	cpu_pmu->pmuver = pmuver;
-	probe->present = true;
-
-	/* Read the nb of CNTx counters supported from PMNC */
-	cpu_pmu->num_events = (armv8pmu_pmcr_read() >> ARMV8_PMU_PMCR_N_SHIFT)
-		& ARMV8_PMU_PMCR_N_MASK;
-
-	/* Add the CPU cycles counter */
-	cpu_pmu->num_events += 1;
-
-	pmceid[0] = pmceid_raw[0] = read_sysreg(pmceid0_el0);
-	pmceid[1] = pmceid_raw[1] = read_sysreg(pmceid1_el0);
-
-	bitmap_from_arr32(cpu_pmu->pmceid_bitmap,
-			     pmceid, ARMV8_PMUV3_MAX_COMMON_EVENTS);
-
-	pmceid[0] = pmceid_raw[0] >> 32;
-	pmceid[1] = pmceid_raw[1] >> 32;
-
-	bitmap_from_arr32(cpu_pmu->pmceid_ext_bitmap,
-			     pmceid, ARMV8_PMUV3_MAX_COMMON_EVENTS);
-
-	/* store PMMIR_EL1 register for sysfs */
-	if (pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P4 && (pmceid_raw[1] & BIT(31)))
-		cpu_pmu->reg_pmmir = read_cpuid(PMMIR_EL1);
-	else
-		cpu_pmu->reg_pmmir = 0;
-}
-
-static int armv8pmu_probe_pmu(struct arm_pmu *cpu_pmu)
-{
-	struct armv8pmu_probe_info probe = {
-		.pmu = cpu_pmu,
-		.present = false,
-	};
-	int ret;
-
-	ret = smp_call_function_any(&cpu_pmu->supported_cpus,
-				    __armv8pmu_probe_pmu,
-				    &probe, 1);
-	if (ret)
-		return ret;
-
-	return probe.present ? 0 : -ENODEV;
-}
-
-static void armv8pmu_disable_user_access_ipi(void *unused)
-{
-	armv8pmu_disable_user_access();
-}
-
-static int armv8pmu_proc_user_access_handler(struct ctl_table *table, int write,
-		void *buffer, size_t *lenp, loff_t *ppos)
-{
-	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
-	if (ret || !write || sysctl_perf_user_access)
-		return ret;
-
-	on_each_cpu(armv8pmu_disable_user_access_ipi, NULL, 1);
-	return 0;
-}
-
-static struct ctl_table armv8_pmu_sysctl_table[] = {
-	{
-		.procname       = "perf_user_access",
-		.data		= &sysctl_perf_user_access,
-		.maxlen		= sizeof(unsigned int),
-		.mode           = 0644,
-		.proc_handler	= armv8pmu_proc_user_access_handler,
-		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
-	},
-	{ }
-};
-
-static void armv8_pmu_register_sysctl_table(void)
-{
-	static u32 tbl_registered = 0;
-
-	if (!cmpxchg_relaxed(&tbl_registered, 0, 1))
-		register_sysctl("kernel", armv8_pmu_sysctl_table);
-}
-
-static int armv8_pmu_init(struct arm_pmu *cpu_pmu, char *name,
-			  int (*map_event)(struct perf_event *event),
-			  const struct attribute_group *events,
-			  const struct attribute_group *format,
-			  const struct attribute_group *caps)
-{
-	int ret = armv8pmu_probe_pmu(cpu_pmu);
-	if (ret)
-		return ret;
-
-	cpu_pmu->handle_irq		= armv8pmu_handle_irq;
-	cpu_pmu->enable			= armv8pmu_enable_event;
-	cpu_pmu->disable		= armv8pmu_disable_event;
-	cpu_pmu->read_counter		= armv8pmu_read_counter;
-	cpu_pmu->write_counter		= armv8pmu_write_counter;
-	cpu_pmu->get_event_idx		= armv8pmu_get_event_idx;
-	cpu_pmu->clear_event_idx	= armv8pmu_clear_event_idx;
-	cpu_pmu->start			= armv8pmu_start;
-	cpu_pmu->stop			= armv8pmu_stop;
-	cpu_pmu->reset			= armv8pmu_reset;
-	cpu_pmu->set_event_filter	= armv8pmu_set_event_filter;
-
-	cpu_pmu->pmu.event_idx		= armv8pmu_user_event_idx;
-
-	cpu_pmu->name			= name;
-	cpu_pmu->map_event		= map_event;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = events ?
-			events : &armv8_pmuv3_events_attr_group;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = format ?
-			format : &armv8_pmuv3_format_attr_group;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_CAPS] = caps ?
-			caps : &armv8_pmuv3_caps_attr_group;
-
-	armv8_pmu_register_sysctl_table();
-	return 0;
-}
-
-static int armv8_pmu_init_nogroups(struct arm_pmu *cpu_pmu, char *name,
-				   int (*map_event)(struct perf_event *event))
-{
-	return armv8_pmu_init(cpu_pmu, name, map_event, NULL, NULL, NULL);
-}
-
-#define PMUV3_INIT_SIMPLE(name)						\
-static int name##_pmu_init(struct arm_pmu *cpu_pmu)			\
-{									\
-	return armv8_pmu_init_nogroups(cpu_pmu, #name, armv8_pmuv3_map_event);\
-}
-
-PMUV3_INIT_SIMPLE(armv8_pmuv3)
-
-PMUV3_INIT_SIMPLE(armv8_cortex_a34)
-PMUV3_INIT_SIMPLE(armv8_cortex_a55)
-PMUV3_INIT_SIMPLE(armv8_cortex_a65)
-PMUV3_INIT_SIMPLE(armv8_cortex_a75)
-PMUV3_INIT_SIMPLE(armv8_cortex_a76)
-PMUV3_INIT_SIMPLE(armv8_cortex_a77)
-PMUV3_INIT_SIMPLE(armv8_cortex_a78)
-PMUV3_INIT_SIMPLE(armv9_cortex_a510)
-PMUV3_INIT_SIMPLE(armv9_cortex_a710)
-PMUV3_INIT_SIMPLE(armv8_cortex_x1)
-PMUV3_INIT_SIMPLE(armv9_cortex_x2)
-PMUV3_INIT_SIMPLE(armv8_neoverse_e1)
-PMUV3_INIT_SIMPLE(armv8_neoverse_n1)
-PMUV3_INIT_SIMPLE(armv9_neoverse_n2)
-PMUV3_INIT_SIMPLE(armv8_neoverse_v1)
-
-PMUV3_INIT_SIMPLE(armv8_nvidia_carmel)
-PMUV3_INIT_SIMPLE(armv8_nvidia_denver)
-
-static int armv8_a35_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a35",
-				       armv8_a53_map_event);
-}
-
-static int armv8_a53_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a53",
-				       armv8_a53_map_event);
-}
-
-static int armv8_a57_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a57",
-				       armv8_a57_map_event);
-}
-
-static int armv8_a72_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a72",
-				       armv8_a57_map_event);
-}
-
-static int armv8_a73_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cortex_a73",
-				       armv8_a73_map_event);
-}
-
-static int armv8_thunder_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	return armv8_pmu_init_nogroups(cpu_pmu, "armv8_cavium_thunder",
-				       armv8_thunder_map_event);
-}
-
-static int armv8_vulcan_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	return armv8_pmu_init_nogroups(cpu_pmu, "armv8_brcm_vulcan",
-				       armv8_vulcan_map_event);
-}
-
-static const struct of_device_id armv8_pmu_of_device_ids[] = {
-	{.compatible = "arm,armv8-pmuv3",	.data = armv8_pmuv3_pmu_init},
-	{.compatible = "arm,cortex-a34-pmu",	.data = armv8_cortex_a34_pmu_init},
-	{.compatible = "arm,cortex-a35-pmu",	.data = armv8_a35_pmu_init},
-	{.compatible = "arm,cortex-a53-pmu",	.data = armv8_a53_pmu_init},
-	{.compatible = "arm,cortex-a55-pmu",	.data = armv8_cortex_a55_pmu_init},
-	{.compatible = "arm,cortex-a57-pmu",	.data = armv8_a57_pmu_init},
-	{.compatible = "arm,cortex-a65-pmu",	.data = armv8_cortex_a65_pmu_init},
-	{.compatible = "arm,cortex-a72-pmu",	.data = armv8_a72_pmu_init},
-	{.compatible = "arm,cortex-a73-pmu",	.data = armv8_a73_pmu_init},
-	{.compatible = "arm,cortex-a75-pmu",	.data = armv8_cortex_a75_pmu_init},
-	{.compatible = "arm,cortex-a76-pmu",	.data = armv8_cortex_a76_pmu_init},
-	{.compatible = "arm,cortex-a77-pmu",	.data = armv8_cortex_a77_pmu_init},
-	{.compatible = "arm,cortex-a78-pmu",	.data = armv8_cortex_a78_pmu_init},
-	{.compatible = "arm,cortex-a510-pmu",	.data = armv9_cortex_a510_pmu_init},
-	{.compatible = "arm,cortex-a710-pmu",	.data = armv9_cortex_a710_pmu_init},
-	{.compatible = "arm,cortex-x1-pmu",	.data = armv8_cortex_x1_pmu_init},
-	{.compatible = "arm,cortex-x2-pmu",	.data = armv9_cortex_x2_pmu_init},
-	{.compatible = "arm,neoverse-e1-pmu",	.data = armv8_neoverse_e1_pmu_init},
-	{.compatible = "arm,neoverse-n1-pmu",	.data = armv8_neoverse_n1_pmu_init},
-	{.compatible = "arm,neoverse-n2-pmu",	.data = armv9_neoverse_n2_pmu_init},
-	{.compatible = "arm,neoverse-v1-pmu",	.data = armv8_neoverse_v1_pmu_init},
-	{.compatible = "cavium,thunder-pmu",	.data = armv8_thunder_pmu_init},
-	{.compatible = "brcm,vulcan-pmu",	.data = armv8_vulcan_pmu_init},
-	{.compatible = "nvidia,carmel-pmu",	.data = armv8_nvidia_carmel_pmu_init},
-	{.compatible = "nvidia,denver-pmu",	.data = armv8_nvidia_denver_pmu_init},
-	{},
-};
-
-static int armv8_pmu_device_probe(struct platform_device *pdev)
-{
-	return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids, NULL);
-}
-
-static struct platform_driver armv8_pmu_driver = {
-	.driver		= {
-		.name	= ARMV8_PMU_PDEV_NAME,
-		.of_match_table = armv8_pmu_of_device_ids,
-		.suppress_bind_attrs = true,
-	},
-	.probe		= armv8_pmu_device_probe,
-};
-
-static int __init armv8_pmu_driver_init(void)
-{
-	if (acpi_disabled)
-		return platform_driver_register(&armv8_pmu_driver);
-	else
-		return arm_pmu_acpi_probe(armv8_pmuv3_pmu_init);
-}
-device_initcall(armv8_pmu_driver_init)
-
-void arch_perf_update_userpage(struct perf_event *event,
-			       struct perf_event_mmap_page *userpg, u64 now)
-{
-	struct clock_read_data *rd;
-	unsigned int seq;
-	u64 ns;
-
-	userpg->cap_user_time = 0;
-	userpg->cap_user_time_zero = 0;
-	userpg->cap_user_time_short = 0;
-	userpg->cap_user_rdpmc = armv8pmu_event_has_user_read(event);
-
-	if (userpg->cap_user_rdpmc) {
-		if (event->hw.flags & ARMPMU_EVT_64BIT)
-			userpg->pmc_width = 64;
-		else
-			userpg->pmc_width = 32;
-	}
-
-	do {
-		rd = sched_clock_read_begin(&seq);
-
-		if (rd->read_sched_clock != arch_timer_read_counter)
-			return;
-
-		userpg->time_mult = rd->mult;
-		userpg->time_shift = rd->shift;
-		userpg->time_zero = rd->epoch_ns;
-		userpg->time_cycles = rd->epoch_cyc;
-		userpg->time_mask = rd->sched_clock_mask;
-
-		/*
-		 * Subtract the cycle base, such that software that
-		 * doesn't know about cap_user_time_short still 'works'
-		 * assuming no wraps.
-		 */
-		ns = mul_u64_u32_shr(rd->epoch_cyc, rd->mult, rd->shift);
-		userpg->time_zero -= ns;
-
-	} while (sched_clock_read_retry(seq));
-
-	userpg->time_offset = userpg->time_zero - now;
-
-	/*
-	 * time_shift is not expected to be greater than 31 due to
-	 * the original published conversion algorithm shifting a
-	 * 32-bit value (now specifies a 64-bit value) - refer
-	 * perf_event_mmap_page documentation in perf_event.h.
-	 */
-	if (userpg->time_shift == 32) {
-		userpg->time_shift = 31;
-		userpg->time_mult >>= 1;
-	}
-
-	/*
-	 * Internal timekeeping for enabled/running/stopped times
-	 * is always computed with the sched_clock.
-	 */
-	userpg->cap_user_time = 1;
-	userpg->cap_user_time_zero = 1;
-	userpg->cap_user_time_short = 1;
-}
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 71d59b5abede..0fcc4eb1a7ab 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -69,7 +69,7 @@ void (*pm_power_off)(void);
 EXPORT_SYMBOL_GPL(pm_power_off);
 
 #ifdef CONFIG_HOTPLUG_CPU
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
        cpu_die();
 }
@@ -217,7 +217,7 @@ void __show_regs(struct pt_regs *regs)
 
 	if (!user_mode(regs)) {
 		printk("pc : %pS\n", (void *)regs->pc);
-		printk("lr : %pS\n", (void *)ptrauth_strip_insn_pac(lr));
+		printk("lr : %pS\n", (void *)ptrauth_strip_kernel_insn_pac(lr));
 	} else {
 		printk("pc : %016llx\n", regs->pc);
 		printk("lr : %016llx\n", lr);
diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c
index fca9cc6f5581..05f40c4e18fd 100644
--- a/arch/arm64/kernel/proton-pack.c
+++ b/arch/arm64/kernel/proton-pack.c
@@ -966,9 +966,6 @@ static void this_cpu_set_vectors(enum arm64_bp_harden_el1_vectors slot)
 {
 	const char *v = arm64_get_bp_hardening_vector(slot);
 
-	if (slot < 0)
-		return;
-
 	__this_cpu_write(this_cpu_vector, v);
 
 	/*
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 06a02707f488..2cfc810d0a5b 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -651,7 +651,7 @@ static int parse_user_sigframe(struct user_ctxs *user,
 			break;
 
 		case TPIDR2_MAGIC:
-			if (!system_supports_sme())
+			if (!system_supports_tpidr2())
 				goto invalid;
 
 			if (user->tpidr2)
@@ -802,7 +802,7 @@ static int restore_sigframe(struct pt_regs *regs,
 			err = restore_fpsimd_context(&user);
 	}
 
-	if (err == 0 && system_supports_sme() && user.tpidr2)
+	if (err == 0 && system_supports_tpidr2() && user.tpidr2)
 		err = restore_tpidr2_context(&user);
 
 	if (err == 0 && system_supports_sme() && user.za)
@@ -893,6 +893,13 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
 			return err;
 	}
 
+	if (system_supports_tpidr2()) {
+		err = sigframe_alloc(user, &user->tpidr2_offset,
+				     sizeof(struct tpidr2_context));
+		if (err)
+			return err;
+	}
+
 	if (system_supports_sme()) {
 		unsigned int vl;
 		unsigned int vq = 0;
@@ -902,11 +909,6 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
 		else
 			vl = task_get_sme_vl(current);
 
-		err = sigframe_alloc(user, &user->tpidr2_offset,
-				     sizeof(struct tpidr2_context));
-		if (err)
-			return err;
-
 		if (thread_za_enabled(&current->thread))
 			vq = sve_vq_from_vl(vl);
 
@@ -974,7 +976,7 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
 	}
 
 	/* TPIDR2 if supported */
-	if (system_supports_sme() && err == 0) {
+	if (system_supports_tpidr2() && err == 0) {
 		struct tpidr2_context __user *tpidr2_ctx =
 			apply_user_offset(user, user->tpidr2_offset);
 		err |= preserve_tpidr2_context(tpidr2_ctx);
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 66f2745062dd..d00d4cbb31b1 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -360,7 +360,7 @@ void __cpu_die(unsigned int cpu)
  * Called from the idle thread for the CPU which has been shutdown.
  *
  */
-void cpu_die(void)
+void __noreturn cpu_die(void)
 {
 	unsigned int cpu = smp_processor_id();
 	const struct cpu_operations *ops = get_cpu_ops(cpu);
@@ -397,7 +397,7 @@ static void __cpu_try_die(int cpu)
  * Kill the calling secondary CPU, early in bringup before it is turned
  * online.
  */
-void cpu_die_early(void)
+void __noreturn cpu_die_early(void)
 {
 	int cpu = smp_processor_id();
 
@@ -815,7 +815,7 @@ void arch_irq_work_raise(void)
 }
 #endif
 
-static void local_cpu_stop(void)
+static void __noreturn local_cpu_stop(void)
 {
 	set_cpu_online(smp_processor_id(), false);
 
@@ -829,7 +829,7 @@ static void local_cpu_stop(void)
  * that cpu_online_mask gets correctly updated and smp_send_stop() can skip
  * CPUs that have already stopped themselves.
  */
-void panic_smp_self_stop(void)
+void __noreturn panic_smp_self_stop(void)
 {
 	local_cpu_stop();
 }
@@ -838,7 +838,7 @@ void panic_smp_self_stop(void)
 static atomic_t waiting_for_crash_ipi = ATOMIC_INIT(0);
 #endif
 
-static void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
+static void __noreturn ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
 {
 #ifdef CONFIG_KEXEC_CORE
 	crash_save_cpu(regs, cpu);
@@ -853,6 +853,8 @@ static void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
 
 	/* just in case */
 	cpu_park_loop();
+#else
+	BUG();
 #endif
 }
 
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index 83154303e682..17f66a74c745 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -25,8 +25,9 @@
  *
  * The regs must be on a stack currently owned by the calling task.
  */
-static __always_inline void unwind_init_from_regs(struct unwind_state *state,
-						  struct pt_regs *regs)
+static __always_inline void
+unwind_init_from_regs(struct unwind_state *state,
+		      struct pt_regs *regs)
 {
 	unwind_init_common(state, current);
 
@@ -42,7 +43,8 @@ static __always_inline void unwind_init_from_regs(struct unwind_state *state,
  *
  * The function which invokes this must be noinline.
  */
-static __always_inline void unwind_init_from_caller(struct unwind_state *state)
+static __always_inline void
+unwind_init_from_caller(struct unwind_state *state)
 {
 	unwind_init_common(state, current);
 
@@ -60,8 +62,9 @@ static __always_inline void unwind_init_from_caller(struct unwind_state *state)
  * duration of the unwind, or the unwind will be bogus. It is never valid to
  * call this for the current task.
  */
-static __always_inline void unwind_init_from_task(struct unwind_state *state,
-						  struct task_struct *task)
+static __always_inline void
+unwind_init_from_task(struct unwind_state *state,
+		      struct task_struct *task)
 {
 	unwind_init_common(state, task);
 
@@ -69,6 +72,32 @@ static __always_inline void unwind_init_from_task(struct unwind_state *state,
 	state->pc = thread_saved_pc(task);
 }
 
+static __always_inline int
+unwind_recover_return_address(struct unwind_state *state)
+{
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	if (state->task->ret_stack &&
+	    (state->pc == (unsigned long)return_to_handler)) {
+		unsigned long orig_pc;
+		orig_pc = ftrace_graph_ret_addr(state->task, NULL, state->pc,
+						(void *)state->fp);
+		if (WARN_ON_ONCE(state->pc == orig_pc))
+			return -EINVAL;
+		state->pc = orig_pc;
+	}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_KRETPROBES
+	if (is_kretprobe_trampoline(state->pc)) {
+		state->pc = kretprobe_find_ret_addr(state->task,
+						    (void *)state->fp,
+						    &state->kr_cur);
+	}
+#endif /* CONFIG_KRETPROBES */
+
+	return 0;
+}
+
 /*
  * Unwind from one frame record (A) to the next frame record (B).
  *
@@ -76,7 +105,8 @@ static __always_inline void unwind_init_from_task(struct unwind_state *state,
  * records (e.g. a cycle), determined based on the location and fp value of A
  * and the location (but not the fp value) of B.
  */
-static int notrace unwind_next(struct unwind_state *state)
+static __always_inline int
+unwind_next(struct unwind_state *state)
 {
 	struct task_struct *tsk = state->task;
 	unsigned long fp = state->fp;
@@ -90,37 +120,18 @@ static int notrace unwind_next(struct unwind_state *state)
 	if (err)
 		return err;
 
-	state->pc = ptrauth_strip_insn_pac(state->pc);
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	if (tsk->ret_stack &&
-		(state->pc == (unsigned long)return_to_handler)) {
-		unsigned long orig_pc;
-		/*
-		 * This is a case where function graph tracer has
-		 * modified a return address (LR) in a stack frame
-		 * to hook a function return.
-		 * So replace it to an original value.
-		 */
-		orig_pc = ftrace_graph_ret_addr(tsk, NULL, state->pc,
-						(void *)state->fp);
-		if (WARN_ON_ONCE(state->pc == orig_pc))
-			return -EINVAL;
-		state->pc = orig_pc;
-	}
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-#ifdef CONFIG_KRETPROBES
-	if (is_kretprobe_trampoline(state->pc))
-		state->pc = kretprobe_find_ret_addr(tsk, (void *)state->fp, &state->kr_cur);
-#endif
+	state->pc = ptrauth_strip_kernel_insn_pac(state->pc);
 
-	return 0;
+	return unwind_recover_return_address(state);
 }
-NOKPROBE_SYMBOL(unwind_next);
 
-static void notrace unwind(struct unwind_state *state,
-			   stack_trace_consume_fn consume_entry, void *cookie)
+static __always_inline void
+unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry,
+       void *cookie)
 {
+	if (unwind_recover_return_address(state))
+		return;
+
 	while (1) {
 		int ret;
 
@@ -131,40 +142,6 @@ static void notrace unwind(struct unwind_state *state,
 			break;
 	}
 }
-NOKPROBE_SYMBOL(unwind);
-
-static bool dump_backtrace_entry(void *arg, unsigned long where)
-{
-	char *loglvl = arg;
-	printk("%s %pSb\n", loglvl, (void *)where);
-	return true;
-}
-
-void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
-		    const char *loglvl)
-{
-	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
-
-	if (regs && user_mode(regs))
-		return;
-
-	if (!tsk)
-		tsk = current;
-
-	if (!try_get_task_stack(tsk))
-		return;
-
-	printk("%sCall trace:\n", loglvl);
-	arch_stack_walk(dump_backtrace_entry, (void *)loglvl, tsk, regs);
-
-	put_task_stack(tsk);
-}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
-{
-	dump_backtrace(NULL, tsk, loglvl);
-	barrier();
-}
 
 /*
  * Per-cpu stacks are only accessible when unwinding the current task in a
@@ -230,3 +207,36 @@ noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
 
 	unwind(&state, consume_entry, cookie);
 }
+
+static bool dump_backtrace_entry(void *arg, unsigned long where)
+{
+	char *loglvl = arg;
+	printk("%s %pSb\n", loglvl, (void *)where);
+	return true;
+}
+
+void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+		    const char *loglvl)
+{
+	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+	if (regs && user_mode(regs))
+		return;
+
+	if (!tsk)
+		tsk = current;
+
+	if (!try_get_task_stack(tsk))
+		return;
+
+	printk("%sCall trace:\n", loglvl);
+	arch_stack_walk(dump_backtrace_entry, (void *)loglvl, tsk, regs);
+
+	put_task_stack(tsk);
+}
+
+void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
+{
+	dump_backtrace(NULL, tsk, loglvl);
+	barrier();
+}
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 4a79ba100799..4bb1b8f47298 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -863,7 +863,7 @@ void bad_el0_sync(struct pt_regs *regs, int reason, unsigned long esr)
 DEFINE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack)
 	__aligned(16);
 
-void panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far)
+void __noreturn panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far)
 {
 	unsigned long tsk_stk = (unsigned long)current->stack;
 	unsigned long irq_stk = (unsigned long)this_cpu_read(irq_stack_ptr);
@@ -905,7 +905,6 @@ void __noreturn arm64_serror_panic(struct pt_regs *regs, unsigned long esr)
 	nmi_panic(regs, "Asynchronous SError Interrupt");
 
 	cpu_park_loop();
-	unreachable();
 }
 
 bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned long esr)
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index beaf9586338f..fe7a53c6781f 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -6,9 +6,7 @@
 # Heavily based on the vDSO Makefiles for other archs.
 #
 
-# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before
-# the inclusion of generic Makefile.
-ARCH_REL_TYPE_ABS := R_AARCH64_JUMP_SLOT|R_AARCH64_GLOB_DAT|R_AARCH64_ABS64
+# Include the generic Makefile to check the built vdso.
 include $(srctree)/lib/vdso/Makefile
 
 obj-vdso := vgettimeofday.o note.o sigreturn.o
diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
index f59bd1a4ead6..d014162c5c71 100644
--- a/arch/arm64/kernel/vdso32/Makefile
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -3,9 +3,6 @@
 # Makefile for vdso32
 #
 
-# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before
-# the inclusion of generic Makefile.
-ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32
 include $(srctree)/lib/vdso/Makefile
 
 # Same as cc-*option, but using CC_COMPAT instead of CC
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index ca6eadeb7d1a..f531da6b362e 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -29,7 +29,6 @@ menuconfig KVM
 	select KVM_MMIO
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_XFER_TO_GUEST_WORK
-	select SRCU
 	select KVM_VFIO
 	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_IRQFD
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 3bd732eaf087..6673c7b4f1a8 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -16,7 +16,6 @@
 #include <linux/fs.h>
 #include <linux/mman.h>
 #include <linux/sched.h>
-#include <linux/kmemleak.h>
 #include <linux/kvm.h>
 #include <linux/kvm_irqfd.h>
 #include <linux/irqbypass.h>
@@ -46,7 +45,6 @@
 #include <kvm/arm_psci.h>
 
 static enum kvm_mode kvm_mode = KVM_MODE_DEFAULT;
-DEFINE_STATIC_KEY_FALSE(kvm_protected_mode_initialized);
 
 DECLARE_KVM_HYP_PER_CPU(unsigned long, kvm_hyp_vector);
 
@@ -220,6 +218,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_VCPU_ATTRIBUTES:
 	case KVM_CAP_PTP_KVM:
 	case KVM_CAP_ARM_SYSTEM_SUSPEND:
+	case KVM_CAP_IRQFD_RESAMPLE:
 		r = 1;
 		break;
 	case KVM_CAP_SET_GUEST_DEBUG2:
@@ -1889,9 +1888,33 @@ static int __init do_pkvm_init(u32 hyp_va_bits)
 	return ret;
 }
 
+static u64 get_hyp_id_aa64pfr0_el1(void)
+{
+	/*
+	 * Track whether the system isn't affected by spectre/meltdown in the
+	 * hypervisor's view of id_aa64pfr0_el1, used for protected VMs.
+	 * Although this is per-CPU, we make it global for simplicity, e.g., not
+	 * to have to worry about vcpu migration.
+	 *
+	 * Unlike for non-protected VMs, userspace cannot override this for
+	 * protected VMs.
+	 */
+	u64 val = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	val &= ~(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) |
+		 ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3));
+
+	val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2),
+			  arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED);
+	val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3),
+			  arm64_get_meltdown_state() == SPECTRE_UNAFFECTED);
+
+	return val;
+}
+
 static void kvm_hyp_init_symbols(void)
 {
-	kvm_nvhe_sym(id_aa64pfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+	kvm_nvhe_sym(id_aa64pfr0_el1_sys_val) = get_hyp_id_aa64pfr0_el1();
 	kvm_nvhe_sym(id_aa64pfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1);
 	kvm_nvhe_sym(id_aa64isar0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR0_EL1);
 	kvm_nvhe_sym(id_aa64isar1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR1_EL1);
@@ -2105,41 +2128,6 @@ out_err:
 	return err;
 }
 
-static void __init _kvm_host_prot_finalize(void *arg)
-{
-	int *err = arg;
-
-	if (WARN_ON(kvm_call_hyp_nvhe(__pkvm_prot_finalize)))
-		WRITE_ONCE(*err, -EINVAL);
-}
-
-static int __init pkvm_drop_host_privileges(void)
-{
-	int ret = 0;
-
-	/*
-	 * Flip the static key upfront as that may no longer be possible
-	 * once the host stage 2 is installed.
-	 */
-	static_branch_enable(&kvm_protected_mode_initialized);
-	on_each_cpu(_kvm_host_prot_finalize, &ret, 1);
-	return ret;
-}
-
-static int __init finalize_hyp_mode(void)
-{
-	if (!is_protected_kvm_enabled())
-		return 0;
-
-	/*
-	 * Exclude HYP sections from kmemleak so that they don't get peeked
-	 * at, which would end badly once inaccessible.
-	 */
-	kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start);
-	kmemleak_free_part_phys(hyp_mem_base, hyp_mem_size);
-	return pkvm_drop_host_privileges();
-}
-
 struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr)
 {
 	struct kvm_vcpu *vcpu;
@@ -2257,14 +2245,6 @@ static __init int kvm_arm_init(void)
 	if (err)
 		goto out_hyp;
 
-	if (!in_hyp_mode) {
-		err = finalize_hyp_mode();
-		if (err) {
-			kvm_err("Failed to finalize Hyp protection\n");
-			goto out_subs;
-		}
-	}
-
 	if (is_protected_kvm_enabled()) {
 		kvm_info("Protected nVHE mode initialized successfully\n");
 	} else if (in_hyp_mode) {
diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
index 07edfc7524c9..37440e1dda93 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
@@ -33,11 +33,14 @@
  * Allow for protected VMs:
  * - Floating-point and Advanced SIMD
  * - Data Independent Timing
+ * - Spectre/Meltdown Mitigation
  */
 #define PVM_ID_AA64PFR0_ALLOW (\
 	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_FP) | \
 	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AdvSIMD) | \
-	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_DIT) \
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_DIT) | \
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) | \
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3) \
 	)
 
 /*
diff --git a/arch/arm64/kvm/hyp/include/nvhe/gfp.h b/arch/arm64/kvm/hyp/include/nvhe/gfp.h
index 0a048dc06a7d..fe5472a184a3 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/gfp.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/gfp.h
@@ -16,7 +16,7 @@ struct hyp_pool {
 	 * API at EL2.
 	 */
 	hyp_spinlock_t lock;
-	struct list_head free_area[MAX_ORDER];
+	struct list_head free_area[MAX_ORDER + 1];
 	phys_addr_t range_start;
 	phys_addr_t range_end;
 	unsigned short max_order;
diff --git a/arch/arm64/kvm/hyp/nvhe/page_alloc.c b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
index 803ba3222e75..b1e392186a0f 100644
--- a/arch/arm64/kvm/hyp/nvhe/page_alloc.c
+++ b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
@@ -110,7 +110,7 @@ static void __hyp_attach_page(struct hyp_pool *pool,
 	 * after coalescing, so make sure to mark it HYP_NO_ORDER proactively.
 	 */
 	p->order = HYP_NO_ORDER;
-	for (; (order + 1) < pool->max_order; order++) {
+	for (; (order + 1) <= pool->max_order; order++) {
 		buddy = __find_buddy_avail(pool, p, order);
 		if (!buddy)
 			break;
@@ -203,9 +203,9 @@ void *hyp_alloc_pages(struct hyp_pool *pool, unsigned short order)
 	hyp_spin_lock(&pool->lock);
 
 	/* Look for a high-enough-order page */
-	while (i < pool->max_order && list_empty(&pool->free_area[i]))
+	while (i <= pool->max_order && list_empty(&pool->free_area[i]))
 		i++;
-	if (i >= pool->max_order) {
+	if (i > pool->max_order) {
 		hyp_spin_unlock(&pool->lock);
 		return NULL;
 	}
@@ -228,8 +228,8 @@ int hyp_pool_init(struct hyp_pool *pool, u64 pfn, unsigned int nr_pages,
 	int i;
 
 	hyp_spin_lock_init(&pool->lock);
-	pool->max_order = min(MAX_ORDER, get_order((nr_pages + 1) << PAGE_SHIFT));
-	for (i = 0; i < pool->max_order; i++)
+	pool->max_order = min(MAX_ORDER, get_order(nr_pages << PAGE_SHIFT));
+	for (i = 0; i <= pool->max_order; i++)
 		INIT_LIST_HEAD(&pool->free_area[i]);
 	pool->range_start = phys;
 	pool->range_end = phys + (nr_pages << PAGE_SHIFT);
diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
index 08d2b004f4b7..edd969a1f36b 100644
--- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c
+++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
@@ -85,19 +85,12 @@ static u64 get_restricted_features_unsigned(u64 sys_reg_val,
 
 static u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu)
 {
-	const struct kvm *kvm = (const struct kvm *)kern_hyp_va(vcpu->kvm);
 	u64 set_mask = 0;
 	u64 allow_mask = PVM_ID_AA64PFR0_ALLOW;
 
 	set_mask |= get_restricted_features_unsigned(id_aa64pfr0_el1_sys_val,
 		PVM_ID_AA64PFR0_RESTRICT_UNSIGNED);
 
-	/* Spectre and Meltdown mitigation in KVM */
-	set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2),
-			       (u64)kvm->arch.pfr0_csv2);
-	set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3),
-			       (u64)kvm->arch.pfr0_csv3);
-
 	return (id_aa64pfr0_el1_sys_val & allow_mask) | set_mask;
 }
 
diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c
index 5da884e11337..c4b4678bc4a4 100644
--- a/arch/arm64/kvm/hypercalls.c
+++ b/arch/arm64/kvm/hypercalls.c
@@ -397,6 +397,8 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	u64 val;
 	int wa_level;
 
+	if (KVM_REG_SIZE(reg->id) != sizeof(val))
+		return -ENOENT;
 	if (copy_from_user(&val, uaddr, KVM_REG_SIZE(reg->id)))
 		return -EFAULT;
 
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
index 7113587222ff..3b9d4d24c361 100644
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@@ -666,14 +666,33 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr)
 				   CONFIG_PGTABLE_LEVELS),
 		.mm_ops		= &kvm_user_mm_ops,
 	};
+	unsigned long flags;
 	kvm_pte_t pte = 0;	/* Keep GCC quiet... */
 	u32 level = ~0;
 	int ret;
 
+	/*
+	 * Disable IRQs so that we hazard against a concurrent
+	 * teardown of the userspace page tables (which relies on
+	 * IPI-ing threads).
+	 */
+	local_irq_save(flags);
 	ret = kvm_pgtable_get_leaf(&pgt, addr, &pte, &level);
-	VM_BUG_ON(ret);
-	VM_BUG_ON(level >= KVM_PGTABLE_MAX_LEVELS);
-	VM_BUG_ON(!(pte & PTE_VALID));
+	local_irq_restore(flags);
+
+	if (ret)
+		return ret;
+
+	/*
+	 * Not seeing an error, but not updating level? Something went
+	 * deeply wrong...
+	 */
+	if (WARN_ON(level >= KVM_PGTABLE_MAX_LEVELS))
+		return -EFAULT;
+
+	/* Oops, the userspace PTs are gone... Replay the fault */
+	if (!kvm_pte_valid(pte))
+		return -EAGAIN;
 
 	return BIT(ARM64_HW_PGTABLE_LEVEL_SHIFT(level));
 }
@@ -1079,7 +1098,7 @@ static bool fault_supports_stage2_huge_mapping(struct kvm_memory_slot *memslot,
  *
  * Returns the size of the mapping.
  */
-static unsigned long
+static long
 transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot,
 			    unsigned long hva, kvm_pfn_t *pfnp,
 			    phys_addr_t *ipap)
@@ -1091,8 +1110,15 @@ transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot,
 	 * sure that the HVA and IPA are sufficiently aligned and that the
 	 * block map is contained within the memslot.
 	 */
-	if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE) &&
-	    get_user_mapping_size(kvm, hva) >= PMD_SIZE) {
+	if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE)) {
+		int sz = get_user_mapping_size(kvm, hva);
+
+		if (sz < 0)
+			return sz;
+
+		if (sz < PMD_SIZE)
+			return PAGE_SIZE;
+
 		/*
 		 * The address we faulted on is backed by a transparent huge
 		 * page.  However, because we map the compound huge page and
@@ -1192,7 +1218,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 {
 	int ret = 0;
 	bool write_fault, writable, force_pte = false;
-	bool exec_fault;
+	bool exec_fault, mte_allowed;
 	bool device = false;
 	unsigned long mmu_seq;
 	struct kvm *kvm = vcpu->kvm;
@@ -1203,7 +1229,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	kvm_pfn_t pfn;
 	bool logging_active = memslot_is_logging(memslot);
 	unsigned long fault_level = kvm_vcpu_trap_get_fault_level(vcpu);
-	unsigned long vma_pagesize, fault_granule;
+	long vma_pagesize, fault_granule;
 	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R;
 	struct kvm_pgtable *pgt;
 
@@ -1218,6 +1244,20 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	}
 
 	/*
+	 * Permission faults just need to update the existing leaf entry,
+	 * and so normally don't require allocations from the memcache. The
+	 * only exception to this is when dirty logging is enabled at runtime
+	 * and a write fault needs to collapse a block entry into a table.
+	 */
+	if (fault_status != ESR_ELx_FSC_PERM ||
+	    (logging_active && write_fault)) {
+		ret = kvm_mmu_topup_memory_cache(memcache,
+						 kvm_mmu_cache_min_pages(kvm));
+		if (ret)
+			return ret;
+	}
+
+	/*
 	 * Let's check if we will get back a huge page backed by hugetlbfs, or
 	 * get block mapping for device MMIO region.
 	 */
@@ -1269,37 +1309,21 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		fault_ipa &= ~(vma_pagesize - 1);
 
 	gfn = fault_ipa >> PAGE_SHIFT;
-	mmap_read_unlock(current->mm);
+	mte_allowed = kvm_vma_mte_allowed(vma);
 
-	/*
-	 * Permission faults just need to update the existing leaf entry,
-	 * and so normally don't require allocations from the memcache. The
-	 * only exception to this is when dirty logging is enabled at runtime
-	 * and a write fault needs to collapse a block entry into a table.
-	 */
-	if (fault_status != ESR_ELx_FSC_PERM ||
-	    (logging_active && write_fault)) {
-		ret = kvm_mmu_topup_memory_cache(memcache,
-						 kvm_mmu_cache_min_pages(kvm));
-		if (ret)
-			return ret;
-	}
+	/* Don't use the VMA after the unlock -- it may have vanished */
+	vma = NULL;
 
-	mmu_seq = vcpu->kvm->mmu_invalidate_seq;
 	/*
-	 * Ensure the read of mmu_invalidate_seq happens before we call
-	 * gfn_to_pfn_prot (which calls get_user_pages), so that we don't risk
-	 * the page we just got a reference to gets unmapped before we have a
-	 * chance to grab the mmu_lock, which ensure that if the page gets
-	 * unmapped afterwards, the call to kvm_unmap_gfn will take it away
-	 * from us again properly. This smp_rmb() interacts with the smp_wmb()
-	 * in kvm_mmu_notifier_invalidate_<page|range_end>.
+	 * Read mmu_invalidate_seq so that KVM can detect if the results of
+	 * vma_lookup() or __gfn_to_pfn_memslot() become stale prior to
+	 * acquiring kvm->mmu_lock.
 	 *
-	 * Besides, __gfn_to_pfn_memslot() instead of gfn_to_pfn_prot() is
-	 * used to avoid unnecessary overhead introduced to locate the memory
-	 * slot because it's always fixed even @gfn is adjusted for huge pages.
+	 * Rely on mmap_read_unlock() for an implicit smp_rmb(), which pairs
+	 * with the smp_wmb() in kvm_mmu_invalidate_end().
 	 */
-	smp_rmb();
+	mmu_seq = vcpu->kvm->mmu_invalidate_seq;
+	mmap_read_unlock(current->mm);
 
 	pfn = __gfn_to_pfn_memslot(memslot, gfn, false, false, NULL,
 				   write_fault, &writable, NULL);
@@ -1350,11 +1374,16 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			vma_pagesize = transparent_hugepage_adjust(kvm, memslot,
 								   hva, &pfn,
 								   &fault_ipa);
+
+		if (vma_pagesize < 0) {
+			ret = vma_pagesize;
+			goto out_unlock;
+		}
 	}
 
 	if (fault_status != ESR_ELx_FSC_PERM && !device && kvm_has_mte(kvm)) {
 		/* Check the VMM hasn't introduced a new disallowed VMA */
-		if (kvm_vma_mte_allowed(vma)) {
+		if (mte_allowed) {
 			sanitise_mte_tags(kvm, pfn, vma_pagesize);
 		} else {
 			ret = -EFAULT;
diff --git a/arch/arm64/kvm/pkvm.c b/arch/arm64/kvm/pkvm.c
index cf56958b1492..6e9ece1ebbe7 100644
--- a/arch/arm64/kvm/pkvm.c
+++ b/arch/arm64/kvm/pkvm.c
@@ -4,6 +4,8 @@
  * Author: Quentin Perret <qperret@google.com>
  */
 
+#include <linux/init.h>
+#include <linux/kmemleak.h>
 #include <linux/kvm_host.h>
 #include <linux/memblock.h>
 #include <linux/mutex.h>
@@ -13,6 +15,8 @@
 
 #include "hyp_constants.h"
 
+DEFINE_STATIC_KEY_FALSE(kvm_protected_mode_initialized);
+
 static struct memblock_region *hyp_memory = kvm_nvhe_sym(hyp_memory);
 static unsigned int *hyp_memblock_nr_ptr = &kvm_nvhe_sym(hyp_memblock_nr);
 
@@ -213,3 +217,46 @@ int pkvm_init_host_vm(struct kvm *host_kvm)
 	mutex_init(&host_kvm->lock);
 	return 0;
 }
+
+static void __init _kvm_host_prot_finalize(void *arg)
+{
+	int *err = arg;
+
+	if (WARN_ON(kvm_call_hyp_nvhe(__pkvm_prot_finalize)))
+		WRITE_ONCE(*err, -EINVAL);
+}
+
+static int __init pkvm_drop_host_privileges(void)
+{
+	int ret = 0;
+
+	/*
+	 * Flip the static key upfront as that may no longer be possible
+	 * once the host stage 2 is installed.
+	 */
+	static_branch_enable(&kvm_protected_mode_initialized);
+	on_each_cpu(_kvm_host_prot_finalize, &ret, 1);
+	return ret;
+}
+
+static int __init finalize_pkvm(void)
+{
+	int ret;
+
+	if (!is_protected_kvm_enabled())
+		return 0;
+
+	/*
+	 * Exclude HYP sections from kmemleak so that they don't get peeked
+	 * at, which would end badly once inaccessible.
+	 */
+	kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start);
+	kmemleak_free_part_phys(hyp_mem_base, hyp_mem_size);
+
+	ret = pkvm_drop_host_privileges();
+	if (ret)
+		pr_err("Failed to finalize Hyp protection: %d\n", ret);
+
+	return ret;
+}
+device_initcall_sync(finalize_pkvm);
diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
index 24908400e190..5eca0cdd961d 100644
--- a/arch/arm64/kvm/pmu-emul.c
+++ b/arch/arm64/kvm/pmu-emul.c
@@ -538,7 +538,8 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
 	if (!kvm_pmu_is_3p5(vcpu))
 		val &= ~ARMV8_PMU_PMCR_LP;
 
-	__vcpu_sys_reg(vcpu, PMCR_EL0) = val;
+	/* The reset bits don't indicate any state, and shouldn't be saved. */
+	__vcpu_sys_reg(vcpu, PMCR_EL0) = val & ~(ARMV8_PMU_PMCR_C | ARMV8_PMU_PMCR_P);
 
 	if (val & ARMV8_PMU_PMCR_E) {
 		kvm_pmu_enable_counter_mask(vcpu,
@@ -557,6 +558,7 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
 		for_each_set_bit(i, &mask, 32)
 			kvm_pmu_set_pmc_value(kvm_vcpu_idx_to_pmc(vcpu, i), 0, true);
 	}
+	kvm_vcpu_pmu_restore_guest(vcpu);
 }
 
 static bool kvm_pmu_counter_is_enabled(struct kvm_pmc *pmc)
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 53749d3a0996..34688918c811 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -794,7 +794,6 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		if (!kvm_supports_32bit_el0())
 			val |= ARMV8_PMU_PMCR_LC;
 		kvm_pmu_handle_pmcr(vcpu, val);
-		kvm_vcpu_pmu_restore_guest(vcpu);
 	} else {
 		/* PMCR.P & PMCR.C are RAZ */
 		val = __vcpu_sys_reg(vcpu, PMCR_EL0)
@@ -856,6 +855,22 @@ static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx)
 	return true;
 }
 
+static int get_pmu_evcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			  u64 *val)
+{
+	u64 idx;
+
+	if (r->CRn == 9 && r->CRm == 13 && r->Op2 == 0)
+		/* PMCCNTR_EL0 */
+		idx = ARMV8_PMU_CYCLE_IDX;
+	else
+		/* PMEVCNTRn_EL0 */
+		idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
+
+	*val = kvm_pmu_get_counter_value(vcpu, idx);
+	return 0;
+}
+
 static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
 			      struct sys_reg_params *p,
 			      const struct sys_reg_desc *r)
@@ -1072,7 +1087,7 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 /* Macro to expand the PMEVCNTRn_EL0 register */
 #define PMU_PMEVCNTR_EL0(n)						\
 	{ PMU_SYS_REG(SYS_PMEVCNTRn_EL0(n)),				\
-	  .reset = reset_pmevcntr,					\
+	  .reset = reset_pmevcntr, .get_user = get_pmu_evcntr,		\
 	  .access = access_pmu_evcntr, .reg = (PMEVCNTR0_EL0 + n), }
 
 /* Macro to expand the PMEVTYPERn_EL0 register */
@@ -1982,7 +1997,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ PMU_SYS_REG(SYS_PMCEID1_EL0),
 	  .access = access_pmceid, .reset = NULL },
 	{ PMU_SYS_REG(SYS_PMCCNTR_EL0),
-	  .access = access_pmu_evcntr, .reset = reset_unknown, .reg = PMCCNTR_EL0 },
+	  .access = access_pmu_evcntr, .reset = reset_unknown,
+	  .reg = PMCCNTR_EL0, .get_user = get_pmu_evcntr},
 	{ PMU_SYS_REG(SYS_PMXEVTYPER_EL0),
 	  .access = access_pmu_evtyper, .reset = NULL },
 	{ PMU_SYS_REG(SYS_PMXEVCNTR_EL0),
diff --git a/arch/arm64/lib/uaccess_flushcache.c b/arch/arm64/lib/uaccess_flushcache.c
index baee22961bdb..7510d1a23124 100644
--- a/arch/arm64/lib/uaccess_flushcache.c
+++ b/arch/arm64/lib/uaccess_flushcache.c
@@ -19,12 +19,6 @@ void memcpy_flushcache(void *dst, const void *src, size_t cnt)
 }
 EXPORT_SYMBOL_GPL(memcpy_flushcache);
 
-void memcpy_page_flushcache(char *to, struct page *page, size_t offset,
-			    size_t len)
-{
-	memcpy_flushcache(to, page_address(page) + offset, len);
-}
-
 unsigned long __copy_user_flushcache(void *to, const void __user *from,
 				     unsigned long n)
 {
diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile
index ff1e800ba7a1..dbd1bc95967d 100644
--- a/arch/arm64/mm/Makefile
+++ b/arch/arm64/mm/Makefile
@@ -2,7 +2,7 @@
 obj-y				:= dma-mapping.o extable.o fault.o init.o \
 				   cache.o copypage.o flush.o \
 				   ioremap.o mmap.o pgd.o mmu.o \
-				   context.o proc.o pageattr.o
+				   context.o proc.o pageattr.o fixmap.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PTDUMP_CORE)	+= ptdump.o
 obj-$(CONFIG_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 5240f6acad64..3cb101e8cb29 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -36,22 +36,7 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
 {
 	unsigned long start = (unsigned long)page_address(page);
 
-	/*
-	 * The architecture only requires a clean to the PoC here in order to
-	 * meet the requirements of the DMA API. However, some vendors (i.e.
-	 * Qualcomm) abuse the DMA API for transferring buffers from the
-	 * non-secure to the secure world, resetting the system if a non-secure
-	 * access shows up after the buffer has been transferred:
-	 *
-	 * https://lore.kernel.org/r/20221114110329.68413-1-manivannan.sadhasivam@linaro.org
-	 *
-	 * Using clean+invalidate appears to make this issue less likely, but
-	 * the drivers themselves still need fixing as the CPU could issue a
-	 * speculative read from the buffer via the linear mapping irrespective
-	 * of the cache maintenance we use. Once the drivers are fixed, we can
-	 * relax this to a clean operation.
-	 */
-	dcache_clean_inval_poc(start, start + size);
+	dcache_clean_poc(start, start + size);
 }
 
 #ifdef CONFIG_IOMMU_DMA
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index f4cb0f85ccf4..9e0db5c387e3 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -535,6 +535,9 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 	unsigned long vm_flags;
 	unsigned int mm_flags = FAULT_FLAG_DEFAULT;
 	unsigned long addr = untagged_addr(far);
+#ifdef CONFIG_PER_VMA_LOCK
+	struct vm_area_struct *vma;
+#endif
 
 	if (kprobe_page_fault(regs, esr))
 		return 0;
@@ -585,6 +588,36 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
 
+#ifdef CONFIG_PER_VMA_LOCK
+	if (!(mm_flags & FAULT_FLAG_USER))
+		goto lock_mmap;
+
+	vma = lock_vma_under_rcu(mm, addr);
+	if (!vma)
+		goto lock_mmap;
+
+	if (!(vma->vm_flags & vm_flags)) {
+		vma_end_read(vma);
+		goto lock_mmap;
+	}
+	fault = handle_mm_fault(vma, addr & PAGE_MASK,
+				mm_flags | FAULT_FLAG_VMA_LOCK, regs);
+	vma_end_read(vma);
+
+	if (!(fault & VM_FAULT_RETRY)) {
+		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+		goto done;
+	}
+	count_vm_vma_lock_event(VMA_LOCK_RETRY);
+
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return 0;
+	}
+lock_mmap:
+#endif /* CONFIG_PER_VMA_LOCK */
 	/*
 	 * As per x86, we may deadlock here. However, since the kernel only
 	 * validly references user space from well defined areas of the code,
@@ -628,6 +661,9 @@ retry:
 	}
 	mmap_read_unlock(mm);
 
+#ifdef CONFIG_PER_VMA_LOCK
+done:
+#endif
 	/*
 	 * Handle the "normal" (no error) case first.
 	 */
diff --git a/arch/arm64/mm/fixmap.c b/arch/arm64/mm/fixmap.c
new file mode 100644
index 000000000000..c0a3301203bd
--- /dev/null
+++ b/arch/arm64/mm/fixmap.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Fixmap manipulation code
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/memory.h>
+#include <linux/mm.h>
+#include <linux/sizes.h>
+
+#include <asm/fixmap.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+#define NR_BM_PTE_TABLES \
+	SPAN_NR_ENTRIES(FIXADDR_TOT_START, FIXADDR_TOP, PMD_SHIFT)
+#define NR_BM_PMD_TABLES \
+	SPAN_NR_ENTRIES(FIXADDR_TOT_START, FIXADDR_TOP, PUD_SHIFT)
+
+static_assert(NR_BM_PMD_TABLES == 1);
+
+#define __BM_TABLE_IDX(addr, shift) \
+	(((addr) >> (shift)) - (FIXADDR_TOT_START >> (shift)))
+
+#define BM_PTE_TABLE_IDX(addr)	__BM_TABLE_IDX(addr, PMD_SHIFT)
+
+static pte_t bm_pte[NR_BM_PTE_TABLES][PTRS_PER_PTE] __page_aligned_bss;
+static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
+static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
+
+static inline pte_t *fixmap_pte(unsigned long addr)
+{
+	return &bm_pte[BM_PTE_TABLE_IDX(addr)][pte_index(addr)];
+}
+
+static void __init early_fixmap_init_pte(pmd_t *pmdp, unsigned long addr)
+{
+	pmd_t pmd = READ_ONCE(*pmdp);
+	pte_t *ptep;
+
+	if (pmd_none(pmd)) {
+		ptep = bm_pte[BM_PTE_TABLE_IDX(addr)];
+		__pmd_populate(pmdp, __pa_symbol(ptep), PMD_TYPE_TABLE);
+	}
+}
+
+static void __init early_fixmap_init_pmd(pud_t *pudp, unsigned long addr,
+					 unsigned long end)
+{
+	unsigned long next;
+	pud_t pud = READ_ONCE(*pudp);
+	pmd_t *pmdp;
+
+	if (pud_none(pud))
+		__pud_populate(pudp, __pa_symbol(bm_pmd), PUD_TYPE_TABLE);
+
+	pmdp = pmd_offset_kimg(pudp, addr);
+	do {
+		next = pmd_addr_end(addr, end);
+		early_fixmap_init_pte(pmdp, addr);
+	} while (pmdp++, addr = next, addr != end);
+}
+
+
+static void __init early_fixmap_init_pud(p4d_t *p4dp, unsigned long addr,
+					 unsigned long end)
+{
+	p4d_t p4d = READ_ONCE(*p4dp);
+	pud_t *pudp;
+
+	if (CONFIG_PGTABLE_LEVELS > 3 && !p4d_none(p4d) &&
+	    p4d_page_paddr(p4d) != __pa_symbol(bm_pud)) {
+		/*
+		 * We only end up here if the kernel mapping and the fixmap
+		 * share the top level pgd entry, which should only happen on
+		 * 16k/4 levels configurations.
+		 */
+		BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
+	}
+
+	if (p4d_none(p4d))
+		__p4d_populate(p4dp, __pa_symbol(bm_pud), P4D_TYPE_TABLE);
+
+	pudp = pud_offset_kimg(p4dp, addr);
+	early_fixmap_init_pmd(pudp, addr, end);
+}
+
+/*
+ * The p*d_populate functions call virt_to_phys implicitly so they can't be used
+ * directly on kernel symbols (bm_p*d). This function is called too early to use
+ * lm_alias so __p*d_populate functions must be used to populate with the
+ * physical address from __pa_symbol.
+ */
+void __init early_fixmap_init(void)
+{
+	unsigned long addr = FIXADDR_TOT_START;
+	unsigned long end = FIXADDR_TOP;
+
+	pgd_t *pgdp = pgd_offset_k(addr);
+	p4d_t *p4dp = p4d_offset(pgdp, addr);
+
+	early_fixmap_init_pud(p4dp, addr, end);
+}
+
+/*
+ * Unusually, this is also called in IRQ context (ghes_iounmap_irq) so if we
+ * ever need to use IPIs for TLB broadcasting, then we're in trouble here.
+ */
+void __set_fixmap(enum fixed_addresses idx,
+			       phys_addr_t phys, pgprot_t flags)
+{
+	unsigned long addr = __fix_to_virt(idx);
+	pte_t *ptep;
+
+	BUG_ON(idx <= FIX_HOLE || idx >= __end_of_fixed_addresses);
+
+	ptep = fixmap_pte(addr);
+
+	if (pgprot_val(flags)) {
+		set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, flags));
+	} else {
+		pte_clear(&init_mm, addr, ptep);
+		flush_tlb_kernel_range(addr, addr+PAGE_SIZE);
+	}
+}
+
+void *__init fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot)
+{
+	const u64 dt_virt_base = __fix_to_virt(FIX_FDT);
+	phys_addr_t dt_phys_base;
+	int offset;
+	void *dt_virt;
+
+	/*
+	 * Check whether the physical FDT address is set and meets the minimum
+	 * alignment requirement. Since we are relying on MIN_FDT_ALIGN to be
+	 * at least 8 bytes so that we can always access the magic and size
+	 * fields of the FDT header after mapping the first chunk, double check
+	 * here if that is indeed the case.
+	 */
+	BUILD_BUG_ON(MIN_FDT_ALIGN < 8);
+	if (!dt_phys || dt_phys % MIN_FDT_ALIGN)
+		return NULL;
+
+	dt_phys_base = round_down(dt_phys, PAGE_SIZE);
+	offset = dt_phys % PAGE_SIZE;
+	dt_virt = (void *)dt_virt_base + offset;
+
+	/* map the first chunk so we can read the size from the header */
+	create_mapping_noalloc(dt_phys_base, dt_virt_base, PAGE_SIZE, prot);
+
+	if (fdt_magic(dt_virt) != FDT_MAGIC)
+		return NULL;
+
+	*size = fdt_totalsize(dt_virt);
+	if (*size > MAX_FDT_SIZE)
+		return NULL;
+
+	if (offset + *size > PAGE_SIZE) {
+		create_mapping_noalloc(dt_phys_base, dt_virt_base,
+				       offset + *size, prot);
+	}
+
+	return dt_virt;
+}
+
+/*
+ * Copy the fixmap region into a new pgdir.
+ */
+void __init fixmap_copy(pgd_t *pgdir)
+{
+	if (!READ_ONCE(pgd_val(*pgd_offset_pgd(pgdir, FIXADDR_TOT_START)))) {
+		/*
+		 * The fixmap falls in a separate pgd to the kernel, and doesn't
+		 * live in the carveout for the swapper_pg_dir. We can simply
+		 * re-use the existing dir for the fixmap.
+		 */
+		set_pgd(pgd_offset_pgd(pgdir, FIXADDR_TOT_START),
+			READ_ONCE(*pgd_offset_k(FIXADDR_TOT_START)));
+	} else if (CONFIG_PGTABLE_LEVELS > 3) {
+		pgd_t *bm_pgdp;
+		p4d_t *bm_p4dp;
+		pud_t *bm_pudp;
+		/*
+		 * The fixmap shares its top level pgd entry with the kernel
+		 * mapping. This can really only occur when we are running
+		 * with 16k/4 levels, so we can simply reuse the pud level
+		 * entry instead.
+		 */
+		BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
+		bm_pgdp = pgd_offset_pgd(pgdir, FIXADDR_TOT_START);
+		bm_p4dp = p4d_offset(bm_pgdp, FIXADDR_TOT_START);
+		bm_pudp = pud_set_fixmap_offset(bm_p4dp, FIXADDR_TOT_START);
+		pud_populate(&init_mm, bm_pudp, lm_alias(bm_pmd));
+		pud_clear_fixmap();
+	} else {
+		BUG();
+	}
+}
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 58a0bb2c17f1..66e70ca47680 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -61,34 +61,8 @@ EXPORT_SYMBOL(memstart_addr);
  * unless restricted on specific platforms (e.g. 30-bit on Raspberry Pi 4).
  * In such case, ZONE_DMA32 covers the rest of the 32-bit addressable memory,
  * otherwise it is empty.
- *
- * Memory reservation for crash kernel either done early or deferred
- * depending on DMA memory zones configs (ZONE_DMA) --
- *
- * In absence of ZONE_DMA configs arm64_dma_phys_limit initialized
- * here instead of max_zone_phys().  This lets early reservation of
- * crash kernel memory which has a dependency on arm64_dma_phys_limit.
- * Reserving memory early for crash kernel allows linear creation of block
- * mappings (greater than page-granularity) for all the memory bank rangs.
- * In this scheme a comparatively quicker boot is observed.
- *
- * If ZONE_DMA configs are defined, crash kernel memory reservation
- * is delayed until DMA zone memory range size initialization performed in
- * zone_sizes_init().  The defer is necessary to steer clear of DMA zone
- * memory range to avoid overlap allocation.  So crash kernel memory boundaries
- * are not known when mapping all bank memory ranges, which otherwise means
- * not possible to exclude crash kernel range from creating block mappings
- * so page-granularity mappings are created for the entire memory range.
- * Hence a slightly slower boot is observed.
- *
- * Note: Page-granularity mappings are necessary for crash kernel memory
- * range for shrinking its size via /sys/kernel/kexec_crash_size interface.
  */
-#if IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32)
 phys_addr_t __ro_after_init arm64_dma_phys_limit;
-#else
-phys_addr_t __ro_after_init arm64_dma_phys_limit = PHYS_MASK + 1;
-#endif
 
 /* Current arm64 boot protocol requires 2MB alignment */
 #define CRASH_ALIGN			SZ_2M
@@ -248,6 +222,8 @@ static void __init zone_sizes_init(void)
 	if (!arm64_dma_phys_limit)
 		arm64_dma_phys_limit = dma32_phys_limit;
 #endif
+	if (!arm64_dma_phys_limit)
+		arm64_dma_phys_limit = PHYS_MASK + 1;
 	max_zone_pfns[ZONE_NORMAL] = max_pfn;
 
 	free_area_init(max_zone_pfns);
@@ -408,9 +384,6 @@ void __init arm64_memblock_init(void)
 
 	early_init_fdt_scan_reserved_mem();
 
-	if (!defer_reserve_crashkernel())
-		reserve_crashkernel();
-
 	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
 }
 
@@ -457,8 +430,7 @@ void __init bootmem_init(void)
 	 * request_standard_resources() depends on crashkernel's memory being
 	 * reserved, so do it here.
 	 */
-	if (defer_reserve_crashkernel())
-		reserve_crashkernel();
+	reserve_crashkernel();
 
 	memblock_dump_all();
 }
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 6f9d8898a025..af6bc8403ee4 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -24,6 +24,7 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/set_memory.h>
+#include <linux/kfence.h>
 
 #include <asm/barrier.h>
 #include <asm/cputype.h>
@@ -38,6 +39,7 @@
 #include <asm/ptdump.h>
 #include <asm/tlbflush.h>
 #include <asm/pgalloc.h>
+#include <asm/kfence.h>
 
 #define NO_BLOCK_MAPPINGS	BIT(0)
 #define NO_CONT_MAPPINGS	BIT(1)
@@ -71,10 +73,6 @@ long __section(".mmuoff.data.write") __early_cpu_boot_status;
 unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)] __page_aligned_bss;
 EXPORT_SYMBOL(empty_zero_page);
 
-static pte_t bm_pte[PTRS_PER_PTE] __page_aligned_bss;
-static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
-static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
-
 static DEFINE_SPINLOCK(swapper_pgdir_lock);
 static DEFINE_MUTEX(fixmap_lock);
 
@@ -450,8 +448,8 @@ static phys_addr_t pgd_pgtable_alloc(int shift)
  * without allocating new levels of table. Note that this permits the
  * creation of new section or page entries.
  */
-static void __init create_mapping_noalloc(phys_addr_t phys, unsigned long virt,
-				  phys_addr_t size, pgprot_t prot)
+void __init create_mapping_noalloc(phys_addr_t phys, unsigned long virt,
+				   phys_addr_t size, pgprot_t prot)
 {
 	if ((virt >= PAGE_END) && (virt < VMALLOC_START)) {
 		pr_warn("BUG: not creating mapping for %pa at 0x%016lx - outside kernel range\n",
@@ -510,20 +508,59 @@ void __init mark_linear_text_alias_ro(void)
 			    PAGE_KERNEL_RO);
 }
 
-static bool crash_mem_map __initdata;
+#ifdef CONFIG_KFENCE
+
+bool __ro_after_init kfence_early_init = !!CONFIG_KFENCE_SAMPLE_INTERVAL;
 
-static int __init enable_crash_mem_map(char *arg)
+/* early_param() will be parsed before map_mem() below. */
+static int __init parse_kfence_early_init(char *arg)
 {
-	/*
-	 * Proper parameter parsing is done by reserve_crashkernel(). We only
-	 * need to know if the linear map has to avoid block mappings so that
-	 * the crashkernel reservations can be unmapped later.
-	 */
-	crash_mem_map = true;
+	int val;
 
+	if (get_option(&arg, &val))
+		kfence_early_init = !!val;
 	return 0;
 }
-early_param("crashkernel", enable_crash_mem_map);
+early_param("kfence.sample_interval", parse_kfence_early_init);
+
+static phys_addr_t __init arm64_kfence_alloc_pool(void)
+{
+	phys_addr_t kfence_pool;
+
+	if (!kfence_early_init)
+		return 0;
+
+	kfence_pool = memblock_phys_alloc(KFENCE_POOL_SIZE, PAGE_SIZE);
+	if (!kfence_pool) {
+		pr_err("failed to allocate kfence pool\n");
+		kfence_early_init = false;
+		return 0;
+	}
+
+	/* Temporarily mark as NOMAP. */
+	memblock_mark_nomap(kfence_pool, KFENCE_POOL_SIZE);
+
+	return kfence_pool;
+}
+
+static void __init arm64_kfence_map_pool(phys_addr_t kfence_pool, pgd_t *pgdp)
+{
+	if (!kfence_pool)
+		return;
+
+	/* KFENCE pool needs page-level mapping. */
+	__map_memblock(pgdp, kfence_pool, kfence_pool + KFENCE_POOL_SIZE,
+			pgprot_tagged(PAGE_KERNEL),
+			NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS);
+	memblock_clear_nomap(kfence_pool, KFENCE_POOL_SIZE);
+	__kfence_pool = phys_to_virt(kfence_pool);
+}
+#else /* CONFIG_KFENCE */
+
+static inline phys_addr_t arm64_kfence_alloc_pool(void) { return 0; }
+static inline void arm64_kfence_map_pool(phys_addr_t kfence_pool, pgd_t *pgdp) { }
+
+#endif /* CONFIG_KFENCE */
 
 static void __init map_mem(pgd_t *pgdp)
 {
@@ -531,6 +568,7 @@ static void __init map_mem(pgd_t *pgdp)
 	phys_addr_t kernel_start = __pa_symbol(_stext);
 	phys_addr_t kernel_end = __pa_symbol(__init_begin);
 	phys_addr_t start, end;
+	phys_addr_t early_kfence_pool;
 	int flags = NO_EXEC_MAPPINGS;
 	u64 i;
 
@@ -543,6 +581,8 @@ static void __init map_mem(pgd_t *pgdp)
 	 */
 	BUILD_BUG_ON(pgd_index(direct_map_end - 1) == pgd_index(direct_map_end));
 
+	early_kfence_pool = arm64_kfence_alloc_pool();
+
 	if (can_set_direct_map())
 		flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
@@ -554,16 +594,6 @@ static void __init map_mem(pgd_t *pgdp)
 	 */
 	memblock_mark_nomap(kernel_start, kernel_end - kernel_start);
 
-#ifdef CONFIG_KEXEC_CORE
-	if (crash_mem_map) {
-		if (defer_reserve_crashkernel())
-			flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
-		else if (crashk_res.end)
-			memblock_mark_nomap(crashk_res.start,
-			    resource_size(&crashk_res));
-	}
-#endif
-
 	/* map all the memory banks */
 	for_each_mem_range(i, &start, &end) {
 		if (start >= end)
@@ -590,24 +620,7 @@ static void __init map_mem(pgd_t *pgdp)
 	__map_memblock(pgdp, kernel_start, kernel_end,
 		       PAGE_KERNEL, NO_CONT_MAPPINGS);
 	memblock_clear_nomap(kernel_start, kernel_end - kernel_start);
-
-	/*
-	 * Use page-level mappings here so that we can shrink the region
-	 * in page granularity and put back unused memory to buddy system
-	 * through /sys/kernel/kexec_crash_size interface.
-	 */
-#ifdef CONFIG_KEXEC_CORE
-	if (crash_mem_map && !defer_reserve_crashkernel()) {
-		if (crashk_res.end) {
-			__map_memblock(pgdp, crashk_res.start,
-				       crashk_res.end + 1,
-				       PAGE_KERNEL,
-				       NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS);
-			memblock_clear_nomap(crashk_res.start,
-					     resource_size(&crashk_res));
-		}
-	}
-#endif
+	arm64_kfence_map_pool(early_kfence_pool, pgdp);
 }
 
 void mark_rodata_ro(void)
@@ -734,34 +747,7 @@ static void __init map_kernel(pgd_t *pgdp)
 			   &vmlinux_initdata, 0, VM_NO_GUARD);
 	map_kernel_segment(pgdp, _data, _end, PAGE_KERNEL, &vmlinux_data, 0, 0);
 
-	if (!READ_ONCE(pgd_val(*pgd_offset_pgd(pgdp, FIXADDR_START)))) {
-		/*
-		 * The fixmap falls in a separate pgd to the kernel, and doesn't
-		 * live in the carveout for the swapper_pg_dir. We can simply
-		 * re-use the existing dir for the fixmap.
-		 */
-		set_pgd(pgd_offset_pgd(pgdp, FIXADDR_START),
-			READ_ONCE(*pgd_offset_k(FIXADDR_START)));
-	} else if (CONFIG_PGTABLE_LEVELS > 3) {
-		pgd_t *bm_pgdp;
-		p4d_t *bm_p4dp;
-		pud_t *bm_pudp;
-		/*
-		 * The fixmap shares its top level pgd entry with the kernel
-		 * mapping. This can really only occur when we are running
-		 * with 16k/4 levels, so we can simply reuse the pud level
-		 * entry instead.
-		 */
-		BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
-		bm_pgdp = pgd_offset_pgd(pgdp, FIXADDR_START);
-		bm_p4dp = p4d_offset(bm_pgdp, FIXADDR_START);
-		bm_pudp = pud_set_fixmap_offset(bm_p4dp, FIXADDR_START);
-		pud_populate(&init_mm, bm_pudp, lm_alias(bm_pmd));
-		pud_clear_fixmap();
-	} else {
-		BUG();
-	}
-
+	fixmap_copy(pgdp);
 	kasan_copy_shadow(pgdp);
 }
 
@@ -1176,166 +1162,6 @@ void vmemmap_free(unsigned long start, unsigned long end,
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
-static inline pud_t *fixmap_pud(unsigned long addr)
-{
-	pgd_t *pgdp = pgd_offset_k(addr);
-	p4d_t *p4dp = p4d_offset(pgdp, addr);
-	p4d_t p4d = READ_ONCE(*p4dp);
-
-	BUG_ON(p4d_none(p4d) || p4d_bad(p4d));
-
-	return pud_offset_kimg(p4dp, addr);
-}
-
-static inline pmd_t *fixmap_pmd(unsigned long addr)
-{
-	pud_t *pudp = fixmap_pud(addr);
-	pud_t pud = READ_ONCE(*pudp);
-
-	BUG_ON(pud_none(pud) || pud_bad(pud));
-
-	return pmd_offset_kimg(pudp, addr);
-}
-
-static inline pte_t *fixmap_pte(unsigned long addr)
-{
-	return &bm_pte[pte_index(addr)];
-}
-
-/*
- * The p*d_populate functions call virt_to_phys implicitly so they can't be used
- * directly on kernel symbols (bm_p*d). This function is called too early to use
- * lm_alias so __p*d_populate functions must be used to populate with the
- * physical address from __pa_symbol.
- */
-void __init early_fixmap_init(void)
-{
-	pgd_t *pgdp;
-	p4d_t *p4dp, p4d;
-	pud_t *pudp;
-	pmd_t *pmdp;
-	unsigned long addr = FIXADDR_START;
-
-	pgdp = pgd_offset_k(addr);
-	p4dp = p4d_offset(pgdp, addr);
-	p4d = READ_ONCE(*p4dp);
-	if (CONFIG_PGTABLE_LEVELS > 3 &&
-	    !(p4d_none(p4d) || p4d_page_paddr(p4d) == __pa_symbol(bm_pud))) {
-		/*
-		 * We only end up here if the kernel mapping and the fixmap
-		 * share the top level pgd entry, which should only happen on
-		 * 16k/4 levels configurations.
-		 */
-		BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
-		pudp = pud_offset_kimg(p4dp, addr);
-	} else {
-		if (p4d_none(p4d))
-			__p4d_populate(p4dp, __pa_symbol(bm_pud), P4D_TYPE_TABLE);
-		pudp = fixmap_pud(addr);
-	}
-	if (pud_none(READ_ONCE(*pudp)))
-		__pud_populate(pudp, __pa_symbol(bm_pmd), PUD_TYPE_TABLE);
-	pmdp = fixmap_pmd(addr);
-	__pmd_populate(pmdp, __pa_symbol(bm_pte), PMD_TYPE_TABLE);
-
-	/*
-	 * The boot-ioremap range spans multiple pmds, for which
-	 * we are not prepared:
-	 */
-	BUILD_BUG_ON((__fix_to_virt(FIX_BTMAP_BEGIN) >> PMD_SHIFT)
-		     != (__fix_to_virt(FIX_BTMAP_END) >> PMD_SHIFT));
-
-	if ((pmdp != fixmap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)))
-	     || pmdp != fixmap_pmd(fix_to_virt(FIX_BTMAP_END))) {
-		WARN_ON(1);
-		pr_warn("pmdp %p != %p, %p\n",
-			pmdp, fixmap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)),
-			fixmap_pmd(fix_to_virt(FIX_BTMAP_END)));
-		pr_warn("fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n",
-			fix_to_virt(FIX_BTMAP_BEGIN));
-		pr_warn("fix_to_virt(FIX_BTMAP_END):   %08lx\n",
-			fix_to_virt(FIX_BTMAP_END));
-
-		pr_warn("FIX_BTMAP_END:       %d\n", FIX_BTMAP_END);
-		pr_warn("FIX_BTMAP_BEGIN:     %d\n", FIX_BTMAP_BEGIN);
-	}
-}
-
-/*
- * Unusually, this is also called in IRQ context (ghes_iounmap_irq) so if we
- * ever need to use IPIs for TLB broadcasting, then we're in trouble here.
- */
-void __set_fixmap(enum fixed_addresses idx,
-			       phys_addr_t phys, pgprot_t flags)
-{
-	unsigned long addr = __fix_to_virt(idx);
-	pte_t *ptep;
-
-	BUG_ON(idx <= FIX_HOLE || idx >= __end_of_fixed_addresses);
-
-	ptep = fixmap_pte(addr);
-
-	if (pgprot_val(flags)) {
-		set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, flags));
-	} else {
-		pte_clear(&init_mm, addr, ptep);
-		flush_tlb_kernel_range(addr, addr+PAGE_SIZE);
-	}
-}
-
-void *__init fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot)
-{
-	const u64 dt_virt_base = __fix_to_virt(FIX_FDT);
-	int offset;
-	void *dt_virt;
-
-	/*
-	 * Check whether the physical FDT address is set and meets the minimum
-	 * alignment requirement. Since we are relying on MIN_FDT_ALIGN to be
-	 * at least 8 bytes so that we can always access the magic and size
-	 * fields of the FDT header after mapping the first chunk, double check
-	 * here if that is indeed the case.
-	 */
-	BUILD_BUG_ON(MIN_FDT_ALIGN < 8);
-	if (!dt_phys || dt_phys % MIN_FDT_ALIGN)
-		return NULL;
-
-	/*
-	 * Make sure that the FDT region can be mapped without the need to
-	 * allocate additional translation table pages, so that it is safe
-	 * to call create_mapping_noalloc() this early.
-	 *
-	 * On 64k pages, the FDT will be mapped using PTEs, so we need to
-	 * be in the same PMD as the rest of the fixmap.
-	 * On 4k pages, we'll use section mappings for the FDT so we only
-	 * have to be in the same PUD.
-	 */
-	BUILD_BUG_ON(dt_virt_base % SZ_2M);
-
-	BUILD_BUG_ON(__fix_to_virt(FIX_FDT_END) >> SWAPPER_TABLE_SHIFT !=
-		     __fix_to_virt(FIX_BTMAP_BEGIN) >> SWAPPER_TABLE_SHIFT);
-
-	offset = dt_phys % SWAPPER_BLOCK_SIZE;
-	dt_virt = (void *)dt_virt_base + offset;
-
-	/* map the first chunk so we can read the size from the header */
-	create_mapping_noalloc(round_down(dt_phys, SWAPPER_BLOCK_SIZE),
-			dt_virt_base, SWAPPER_BLOCK_SIZE, prot);
-
-	if (fdt_magic(dt_virt) != FDT_MAGIC)
-		return NULL;
-
-	*size = fdt_totalsize(dt_virt);
-	if (*size > MAX_FDT_SIZE)
-		return NULL;
-
-	if (offset + *size > SWAPPER_BLOCK_SIZE)
-		create_mapping_noalloc(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
-			       round_up(offset + *size, SWAPPER_BLOCK_SIZE), prot);
-
-	return dt_virt;
-}
-
 int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
 {
 	pud_t new_pud = pfn_pud(__phys_to_pfn(phys), mk_pud_sect_prot(prot));
diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
index 79dd201c59d8..8e2017ba5f1b 100644
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@@ -11,6 +11,7 @@
 #include <asm/cacheflush.h>
 #include <asm/set_memory.h>
 #include <asm/tlbflush.h>
+#include <asm/kfence.h>
 
 struct page_change_data {
 	pgprot_t set_mask;
@@ -22,12 +23,14 @@ bool rodata_full __ro_after_init = IS_ENABLED(CONFIG_RODATA_FULL_DEFAULT_ENABLED
 bool can_set_direct_map(void)
 {
 	/*
-	 * rodata_full, DEBUG_PAGEALLOC and KFENCE require linear map to be
+	 * rodata_full and DEBUG_PAGEALLOC require linear map to be
 	 * mapped at page granularity, so that it is possible to
 	 * protect/unprotect single pages.
+	 *
+	 * KFENCE pool requires page-granular mapping if initialized late.
 	 */
 	return (rodata_enabled && rodata_full) || debug_pagealloc_enabled() ||
-		IS_ENABLED(CONFIG_KFENCE);
+		arm64_kfence_can_set_direct_map();
 }
 
 static int change_page_range(pte_t *ptep, unsigned long addr, void *data)
diff --git a/arch/arm64/mm/ptdump.c b/arch/arm64/mm/ptdump.c
index 9bc4066c5bf3..e305b6593c4e 100644
--- a/arch/arm64/mm/ptdump.c
+++ b/arch/arm64/mm/ptdump.c
@@ -45,7 +45,7 @@ static struct addr_marker address_markers[] = {
 	{ MODULES_END,			"Modules end" },
 	{ VMALLOC_START,		"vmalloc() area" },
 	{ VMALLOC_END,			"vmalloc() end" },
-	{ FIXADDR_START,		"Fixmap start" },
+	{ FIXADDR_TOT_START,		"Fixmap start" },
 	{ FIXADDR_TOP,			"Fixmap end" },
 	{ PCI_IO_START,			"PCI I/O start" },
 	{ PCI_IO_END,			"PCI I/O end" },
diff --git a/arch/arm64/net/bpf_jit.h b/arch/arm64/net/bpf_jit.h
index a6acb94ea3d6..c2edadb8ec6a 100644
--- a/arch/arm64/net/bpf_jit.h
+++ b/arch/arm64/net/bpf_jit.h
@@ -281,4 +281,8 @@
 /* DMB */
 #define A64_DMB_ISH aarch64_insn_gen_dmb(AARCH64_INSN_MB_ISH)
 
+/* ADR */
+#define A64_ADR(Rd, offset) \
+	aarch64_insn_gen_adr(0, offset, Rd, AARCH64_INSN_ADR_TYPE_ADR)
+
 #endif /* _BPF_JIT_H */
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 62f805f427b7..b26da8efa616 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1900,7 +1900,8 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 		restore_args(ctx, args_off, nargs);
 		/* call original func */
 		emit(A64_LDR64I(A64_R(10), A64_SP, retaddr_off), ctx);
-		emit(A64_BLR(A64_R(10)), ctx);
+		emit(A64_ADR(A64_LR, AARCH64_INSN_SIZE * 2), ctx);
+		emit(A64_RET(A64_R(10)), ctx);
 		/* store return value */
 		emit(A64_STR64I(A64_R(0), A64_SP, retval_off), ctx);
 		/* reserve a nop for bpf_tramp_image_put */
diff --git a/arch/arm64/tools/gen-sysreg.awk b/arch/arm64/tools/gen-sysreg.awk
index 6fa0468caa00..d1254a056114 100755
--- a/arch/arm64/tools/gen-sysreg.awk
+++ b/arch/arm64/tools/gen-sysreg.awk
@@ -4,23 +4,35 @@
 #
 # Usage: awk -f gen-sysreg.awk sysregs.txt
 
+function block_current() {
+	return __current_block[__current_block_depth];
+}
+
 # Log an error and terminate
 function fatal(msg) {
 	print "Error at " NR ": " msg > "/dev/stderr"
+
+	printf "Current block nesting:"
+
+	for (i = 0; i <= __current_block_depth; i++) {
+		printf " " __current_block[i]
+	}
+	printf "\n"
+
 	exit 1
 }
 
-# Sanity check that the start or end of a block makes sense at this point in
-# the file. If not, produce an error and terminate.
-#
-# @this - the $Block or $EndBlock
-# @prev - the only valid block to already be in (value of @block)
-# @new - the new value of @block
-function change_block(this, prev, new) {
-	if (block != prev)
-		fatal("unexpected " this " (inside " block ")")
-
-	block = new
+# Enter a new block, setting the active block to @block
+function block_push(block) {
+	__current_block[++__current_block_depth] = block
+}
+
+# Exit a block, setting the active block to the parent block
+function block_pop() {
+	if (__current_block_depth == 0)
+		fatal("error: block_pop() in root block")
+
+	__current_block_depth--;
 }
 
 # Sanity check the number of records for a field makes sense. If not, produce
@@ -84,10 +96,14 @@ BEGIN {
 	print "/* Generated file - do not edit */"
 	print ""
 
-	block = "None"
+	__current_block_depth = 0
+	__current_block[__current_block_depth] = "Root"
 }
 
 END {
+	if (__current_block_depth != 0)
+		fatal("Missing terminator for " block_current() " block")
+
 	print "#endif /* __ASM_SYSREG_DEFS_H */"
 }
 
@@ -95,8 +111,9 @@ END {
 /^$/ { next }
 /^[\t ]*#/ { next }
 
-/^SysregFields/ {
-	change_block("SysregFields", "None", "SysregFields")
+/^SysregFields/ && block_current() == "Root" {
+	block_push("SysregFields")
+
 	expect_fields(2)
 
 	reg = $2
@@ -110,12 +127,10 @@ END {
 	next
 }
 
-/^EndSysregFields/ {
+/^EndSysregFields/ && block_current() == "SysregFields" {
 	if (next_bit > 0)
 		fatal("Unspecified bits in " reg)
 
-	change_block("EndSysregFields", "SysregFields", "None")
-
 	define(reg "_RES0", "(" res0 ")")
 	define(reg "_RES1", "(" res1 ")")
 	define(reg "_UNKN", "(" unkn ")")
@@ -126,11 +141,13 @@ END {
 	res1 = null
 	unkn = null
 
+	block_pop()
 	next
 }
 
-/^Sysreg/ {
-	change_block("Sysreg", "None", "Sysreg")
+/^Sysreg/ && block_current() == "Root" {
+	block_push("Sysreg")
+
 	expect_fields(7)
 
 	reg = $2
@@ -160,12 +177,10 @@ END {
 	next
 }
 
-/^EndSysreg/ {
+/^EndSysreg/ && block_current() == "Sysreg" {
 	if (next_bit > 0)
 		fatal("Unspecified bits in " reg)
 
-	change_block("EndSysreg", "Sysreg", "None")
-
 	if (res0 != null)
 		define(reg "_RES0", "(" res0 ")")
 	if (res1 != null)
@@ -185,12 +200,13 @@ END {
 	res1 = null
 	unkn = null
 
+	block_pop()
 	next
 }
 
 # Currently this is effectivey a comment, in future we may want to emit
 # defines for the fields.
-/^Fields/ && (block == "Sysreg") {
+/^Fields/ && block_current() == "Sysreg" {
 	expect_fields(2)
 
 	if (next_bit != 63)
@@ -208,7 +224,7 @@ END {
 }
 
 
-/^Res0/ && (block == "Sysreg" || block == "SysregFields") {
+/^Res0/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
 	expect_fields(2)
 	parse_bitdef(reg, "RES0", $2)
 	field = "RES0_" msb "_" lsb
@@ -218,7 +234,7 @@ END {
 	next
 }
 
-/^Res1/ && (block == "Sysreg" || block == "SysregFields") {
+/^Res1/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
 	expect_fields(2)
 	parse_bitdef(reg, "RES1", $2)
 	field = "RES1_" msb "_" lsb
@@ -228,7 +244,7 @@ END {
 	next
 }
 
-/^Unkn/ && (block == "Sysreg" || block == "SysregFields") {
+/^Unkn/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
 	expect_fields(2)
 	parse_bitdef(reg, "UNKN", $2)
 	field = "UNKN_" msb "_" lsb
@@ -238,7 +254,7 @@ END {
 	next
 }
 
-/^Field/ && (block == "Sysreg" || block == "SysregFields") {
+/^Field/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
 	expect_fields(3)
 	field = $3
 	parse_bitdef(reg, field, $2)
@@ -249,15 +265,16 @@ END {
 	next
 }
 
-/^Raz/ && (block == "Sysreg" || block == "SysregFields") {
+/^Raz/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
 	expect_fields(2)
 	parse_bitdef(reg, field, $2)
 
 	next
 }
 
-/^SignedEnum/ {
-	change_block("Enum<", "Sysreg", "Enum")
+/^SignedEnum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	block_push("Enum")
+
 	expect_fields(3)
 	field = $3
 	parse_bitdef(reg, field, $2)
@@ -268,8 +285,9 @@ END {
 	next
 }
 
-/^UnsignedEnum/ {
-	change_block("Enum<", "Sysreg", "Enum")
+/^UnsignedEnum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	block_push("Enum")
+
 	expect_fields(3)
 	field = $3
 	parse_bitdef(reg, field, $2)
@@ -280,8 +298,9 @@ END {
 	next
 }
 
-/^Enum/ {
-	change_block("Enum", "Sysreg", "Enum")
+/^Enum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	block_push("Enum")
+
 	expect_fields(3)
 	field = $3
 	parse_bitdef(reg, field, $2)
@@ -291,16 +310,18 @@ END {
 	next
 }
 
-/^EndEnum/ {
-	change_block("EndEnum", "Enum", "Sysreg")
+/^EndEnum/ && block_current() == "Enum" {
+
 	field = null
 	msb = null
 	lsb = null
 	print ""
+
+	block_pop()
 	next
 }
 
-/0b[01]+/ && block == "Enum" {
+/0b[01]+/ && block_current() == "Enum" {
 	expect_fields(2)
 	val = $1
 	name = $2
diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg
index dd5a9c7e310f..77edce16f4f9 100644
--- a/arch/arm64/tools/sysreg
+++ b/arch/arm64/tools/sysreg
@@ -879,7 +879,30 @@ EndEnum
 EndSysreg
 
 Sysreg	ID_AA64PFR1_EL1	3	0	0	4	1
-Res0	63:40
+UnsignedEnum	63:60	PFAR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	59:56	DF2
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	55:52	MTEX
+	0b0000	MTE
+	0b0001	MTE4
+EndEnum
+UnsignedEnum	51:48	THE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	47:44	GCS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	43:40	MTE_frac
+	0b0000	ASYNC
+	0b1111	NI
+EndEnum
 UnsignedEnum	39:36	NMI
 	0b0000	NI
 	0b0001	IMP
@@ -1866,6 +1889,146 @@ Field	1	ZA
 Field	0	SM
 EndSysreg
 
+SysregFields	HFGxTR_EL2
+Field	63	nAMIAIR2_EL1
+Field	62	nMAIR2_EL1
+Field	61	nS2POR_EL1
+Field	60	nPOR_EL1
+Field	59	nPOR_EL0
+Field	58	nPIR_EL1
+Field	57	nPIRE0_EL1
+Field	56	nRCWMASK_EL1
+Field	55	nTPIDR2_EL0
+Field	54	nSMPRI_EL1
+Field	53	nGCS_EL1
+Field	52	nGCS_EL0
+Res0	51
+Field	50	nACCDATA_EL1
+Field	49	ERXADDR_EL1
+Field	48	EXRPFGCDN_EL1
+Field	47	EXPFGCTL_EL1
+Field	46	EXPFGF_EL1
+Field	45	ERXMISCn_EL1
+Field	44	ERXSTATUS_EL1
+Field	43	ERXCTLR_EL1
+Field	42	ERXFR_EL1
+Field	41	ERRSELR_EL1
+Field	40	ERRIDR_EL1
+Field	39	ICC_IGRPENn_EL1
+Field	38	VBAR_EL1
+Field	37	TTBR1_EL1
+Field	36	TTBR0_EL1
+Field	35	TPIDR_EL0
+Field	34	TPIDRRO_EL0
+Field	33	TPIDR_EL1
+Field	32	TCR_EL1
+Field	31	SCTXNUM_EL0
+Field	30	SCTXNUM_EL1
+Field	29	SCTLR_EL1
+Field	28	REVIDR_EL1
+Field	27	PAR_EL1
+Field	26	MPIDR_EL1
+Field	25	MIDR_EL1
+Field	24	MAIR_EL1
+Field	23	LORSA_EL1
+Field	22	LORN_EL1
+Field	21	LORID_EL1
+Field	20	LOREA_EL1
+Field	19	LORC_EL1
+Field	18	ISR_EL1
+Field	17	FAR_EL1
+Field	16	ESR_EL1
+Field	15	DCZID_EL0
+Field	14	CTR_EL0
+Field	13	CSSELR_EL1
+Field	12	CPACR_EL1
+Field	11	CONTEXTIDR_EL1
+Field	10	CLIDR_EL1
+Field	9	CCSIDR_EL1
+Field	8	APIBKey
+Field	7	APIAKey
+Field	6	APGAKey
+Field	5	APDBKey
+Field	4	APDAKey
+Field	3	AMAIR_EL1
+Field	2	AIDR_EL1
+Field	1	AFSR1_EL1
+Field	0	AFSR0_EL1
+EndSysregFields
+
+Sysreg HFGRTR_EL2	3	4	1	1	4
+Fields	HFGxTR_EL2
+EndSysreg
+
+Sysreg HFGWTR_EL2	3	4	1	1	5
+Fields	HFGxTR_EL2
+EndSysreg
+
+Sysreg HFGITR_EL2	3	4	1	1	6
+Res0	63:61
+Field	60	COSPRCTX
+Field	59	nGCSEPP
+Field	58	nGCSSTR_EL1
+Field	57	nGCSPUSHM_EL1
+Field	56	nBRBIALL
+Field	55	nBRBINJ
+Field	54	DCCVAC
+Field	53	SVC_EL1
+Field	52	SVC_EL0
+Field	51	ERET
+Field	50	CPPRCTX
+Field	49	DVPRCTX
+Field	48	CFPRCTX
+Field	47	TLBIVAALE1
+Field	46	TLBIVALE1
+Field	45	TLBIVAAE1
+Field	44	TLBIASIDE1
+Field	43	TLBIVAE1
+Field	42	TLBIVMALLE1
+Field	41	TLBIRVAALE1
+Field	40	TLBIRVALE1
+Field	39	TLBIRVAAE1
+Field	38	TLBIRVAE1
+Field	37	TLBIRVAALE1IS
+Field	36	TLBIRVALE1IS
+Field	35	TLBIRVAAE1IS
+Field	34	TLBIRVAE1IS
+Field	33	TLBIVAALE1IS
+Field	32	TLBIVALE1IS
+Field	31	TLBIVAAE1IS
+Field	30	TLBIASIDE1IS
+Field	29	TLBIVAE1IS
+Field	28	TLBIVMALLE1IS
+Field	27	TLBIRVAALE1OS
+Field	26	TLBIRVALE1OS
+Field	25	TLBIRVAAE1OS
+Field	24	TLBIRVAE1OS
+Field	23	TLBIVAALE1OS
+Field	22	TLBIVALE1OS
+Field	21	TLBIVAAE1OS
+Field	20	TLBIASIDE1OS
+Field	19	TLBIVAE1OS
+Field	18	TLBIVMALLE1OS
+Field	17	ATS1E1WP
+Field	16	ATS1E1RP
+Field	15	ATS1E0W
+Field	14	ATS1E0R
+Field	13	ATS1E1W
+Field	12	ATS1E1R
+Field	11	DCZVA
+Field	10	DCCIVAC
+Field	9	DCCVADP
+Field	8	DCCVAP
+Field	7	DCCVAU
+Field	6	DCCISW
+Field	5	DCCSW
+Field	4	DCISW
+Field	3	DCIVAC
+Field	2	ICIVAU
+Field	1	ICIALLU
+Field	0	ICIALLUIS
+EndSysreg
+
 Sysreg	ZCR_EL2	3	4	1	2	0
 Fields	ZCR_ELx
 EndSysreg
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index dba02da6fa34..00379a843c37 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -332,10 +332,6 @@ config HIGHMEM
 	select KMAP_LOCAL
 	default y
 
-config ARCH_FORCE_MAX_ORDER
-	int "Maximum zone order"
-	default "11"
-
 config DRAM_BASE
 	hex "DRAM start addr (the same with memory-section in dts)"
 	default 0x0
diff --git a/arch/csky/abiv1/alignment.c b/arch/csky/abiv1/alignment.c
index 2df115d0e210..b60259daed1b 100644
--- a/arch/csky/abiv1/alignment.c
+++ b/arch/csky/abiv1/alignment.c
@@ -332,22 +332,9 @@ static struct ctl_table alignment_tbl[5] = {
 	{}
 };
 
-static struct ctl_table sysctl_table[2] = {
-	{
-	 .procname = "csky_alignment",
-	 .mode = 0555,
-	 .child = alignment_tbl},
-	{}
-};
-
-static struct ctl_path sysctl_path[2] = {
-	{.procname = "csky"},
-	{}
-};
-
 static int __init csky_alignment_init(void)
 {
-	register_sysctl_paths(sysctl_path, sysctl_table);
+	register_sysctl_init("csky/csky_alignment", alignment_tbl);
 	return 0;
 }
 
diff --git a/arch/csky/include/asm/processor.h b/arch/csky/include/asm/processor.h
index ea75d72dea86..e487a46d1c37 100644
--- a/arch/csky/include/asm/processor.h
+++ b/arch/csky/include/asm/processor.h
@@ -72,8 +72,6 @@ struct task_struct;
 /* Prepare to copy thread state - unlazy all lazy status */
 #define prepare_to_copy(tsk)    do { } while (0)
 
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
 unsigned long __get_wchan(struct task_struct *p);
 
 #define KSTK_EIP(tsk)		(task_pt_regs(tsk)->pc)
diff --git a/arch/csky/kernel/smp.c b/arch/csky/kernel/smp.c
index be77383acb5f..b12e2c3c387f 100644
--- a/arch/csky/kernel/smp.c
+++ b/arch/csky/kernel/smp.c
@@ -300,7 +300,7 @@ void __cpu_die(unsigned int cpu)
 	pr_notice("CPU%u: shutdown\n", cpu);
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	idle_task_exit();
 
@@ -317,5 +317,7 @@ void arch_cpu_idle_dead(void)
 		"jmpi	csky_start_secondary"
 		:
 		: "r" (secondary_stack));
+
+	BUG();
 }
 #endif
diff --git a/arch/csky/kernel/vdso/Makefile b/arch/csky/kernel/vdso/Makefile
index 0b6909f10667..299e4e41ebc5 100644
--- a/arch/csky/kernel/vdso/Makefile
+++ b/arch/csky/kernel/vdso/Makefile
@@ -1,8 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
-# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before
-# the inclusion of generic Makefile.
-ARCH_REL_TYPE_ABS := R_CKCORE_ADDR32|R_CKCORE_JUMP_SLOT
+# Include the generic Makefile to check the built vdso.
 include $(srctree)/lib/vdso/Makefile
 
 # Symbols present in the vdso
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index d7e4a24e8644..21fa63ce5ffc 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -25,6 +25,7 @@ config IA64
 	select PCI_DOMAINS if PCI
 	select PCI_MSI
 	select PCI_SYSCALL if PCI
+	select HAS_IOPORT
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_EXIT_THREAD
@@ -202,10 +203,9 @@ config IA64_CYCLONE
 	  If you're unsure, answer N.
 
 config ARCH_FORCE_MAX_ORDER
-	int "MAX_ORDER (11 - 17)"  if !HUGETLB_PAGE
-	range 11 17  if !HUGETLB_PAGE
-	default "17" if HUGETLB_PAGE
-	default "11"
+	int
+	default "16" if HUGETLB_PAGE
+	default "10"
 
 config SMP
 	bool "Symmetric multi-processing support"
diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h
index 84e8ce387b69..a58f8b466d96 100644
--- a/arch/ia64/include/asm/sparsemem.h
+++ b/arch/ia64/include/asm/sparsemem.h
@@ -12,9 +12,9 @@
 #define SECTION_SIZE_BITS	(30)
 #define MAX_PHYSMEM_BITS	(50)
 #ifdef CONFIG_ARCH_FORCE_MAX_ORDER
-#if ((CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
+#if (CONFIG_ARCH_FORCE_MAX_ORDER + PAGE_SHIFT > SECTION_SIZE_BITS)
 #undef SECTION_SIZE_BITS
-#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT)
+#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER + PAGE_SHIFT)
 #endif
 #endif
 
diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index 76730f34685c..88b3ce3e66cd 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -234,15 +234,6 @@ static struct ctl_table kdump_ctl_table[] = {
 	},
 	{ }
 };
-
-static struct ctl_table sys_table[] = {
-	{
-	  .procname = "kernel",
-	  .mode = 0555,
-	  .child = kdump_ctl_table,
-	},
-	{ }
-};
 #endif
 
 static int
@@ -257,7 +248,7 @@ machine_crash_setup(void)
 	if((ret = register_die_notifier(&kdump_init_notifier_nb)) != 0)
 		return ret;
 #ifdef CONFIG_SYSCTL
-	register_sysctl_table(sys_table);
+	register_sysctl("kernel", kdump_ctl_table);
 #endif
 	return 0;
 }
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 21dfa4aa35bb..033f5aead88a 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -853,7 +853,7 @@ valid_phys_addr_range (phys_addr_t phys_addr, unsigned long size)
 	 * /dev/mem reads and writes use copy_to_user(), which implicitly
 	 * uses a granule-sized kernel identity mapping.  It's really
 	 * only safe to do this for regions in kern_memmap.  For more
-	 * details, see Documentation/ia64/aliasing.rst.
+	 * details, see Documentation/arch/ia64/aliasing.rst.
 	 */
 	attr = kern_mem_attribute(phys_addr, size);
 	if (attr & EFI_MEMORY_WB || attr & EFI_MEMORY_UC)
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 2094f3249019..cc4733e9990a 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -28,7 +28,7 @@
 #include <asm/native/inst.h>
 
 /*
- * See Documentation/ia64/fsys.rst for details on fsyscalls.
+ * See Documentation/arch/ia64/fsys.rst for details on fsyscalls.
  *
  * On entry to an fsyscall handler:
  *   r10	= 0 (i.e., defaults to "successful syscall return")
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index 8f62cf97f691..3661135da9d9 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -485,19 +485,19 @@ module_frob_arch_sections (Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, char *secstrings,
 	return 0;
 }
 
-static inline int
+static inline bool
 in_init (const struct module *mod, uint64_t addr)
 {
-	return addr - (uint64_t) mod->init_layout.base < mod->init_layout.size;
+	return within_module_init(addr, mod);
 }
 
-static inline int
+static inline bool
 in_core (const struct module *mod, uint64_t addr)
 {
-	return addr - (uint64_t) mod->core_layout.base < mod->core_layout.size;
+	return within_module_core(addr, mod);
 }
 
-static inline int
+static inline bool
 is_internal (const struct module *mod, uint64_t value)
 {
 	return in_init(mod, value) || in_core(mod, value);
@@ -677,7 +677,8 @@ do_reloc (struct module *mod, uint8_t r_type, Elf64_Sym *sym, uint64_t addend,
 		break;
 
 	      case RV_BDREL:
-		val -= (uint64_t) (in_init(mod, val) ? mod->init_layout.base : mod->core_layout.base);
+		val -= (uint64_t) (in_init(mod, val) ? mod->mem[MOD_INIT_TEXT].base :
+				   mod->mem[MOD_TEXT].base);
 		break;
 
 	      case RV_LTV:
@@ -812,15 +813,18 @@ apply_relocate_add (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symind
 		 *     addresses have been selected...
 		 */
 		uint64_t gp;
-		if (mod->core_layout.size > MAX_LTOFF)
+		struct module_memory *mod_mem;
+
+		mod_mem = &mod->mem[MOD_DATA];
+		if (mod_mem->size > MAX_LTOFF)
 			/*
 			 * This takes advantage of fact that SHF_ARCH_SMALL gets allocated
 			 * at the end of the module.
 			 */
-			gp = mod->core_layout.size - MAX_LTOFF / 2;
+			gp = mod_mem->size - MAX_LTOFF / 2;
 		else
-			gp = mod->core_layout.size / 2;
-		gp = (uint64_t) mod->core_layout.base + ((gp + 7) & -8);
+			gp = mod_mem->size / 2;
+		gp = (uint64_t) mod_mem->base + ((gp + 7) & -8);
 		mod->arch.gp = gp;
 		DEBUGP("%s: placing gp at 0x%lx\n", __func__, gp);
 	}
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index f6195a0a00ae..9a5cd9fad3a9 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -201,7 +201,7 @@ __setup("nohalt", nohalt_setup);
 
 #ifdef CONFIG_HOTPLUG_CPU
 /* We don't actually take CPU down, just spin without interrupts. */
-static inline void play_dead(void)
+static inline void __noreturn play_dead(void)
 {
 	unsigned int this_cpu = smp_processor_id();
 
@@ -219,13 +219,13 @@ static inline void play_dead(void)
 	BUG();
 }
 #else
-static inline void play_dead(void)
+static inline void __noreturn play_dead(void)
 {
 	BUG();
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	play_dead();
 }
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index bd3ba276e69c..03b632c56899 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -581,7 +581,7 @@ static int salinfo_cpu_pre_down(unsigned int cpu)
  * 'data' contains an integer that corresponds to the feature we're
  * testing
  */
-static int proc_salinfo_show(struct seq_file *m, void *v)
+static int __maybe_unused proc_salinfo_show(struct seq_file *m, void *v)
 {
 	unsigned long data = (unsigned long)v;
 	seq_puts(m, (sal_platform_features & data) ? "1\n" : "0\n");
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 24901d809301..1e9eaa107eb7 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -77,7 +77,7 @@ skip:
 	return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
 }
 
-static inline void
+static inline __init void
 alloc_per_cpu_data(void)
 {
 	size_t size = PERCPU_PAGE_SIZE * num_possible_cpus();
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index 380d2f3966c9..78a02e026164 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -58,7 +58,7 @@ huge_pte_offset (struct mm_struct *mm, unsigned long addr, unsigned long sz)
 
 	pgd = pgd_offset(mm, taddr);
 	if (pgd_present(*pgd)) {
-		p4d = p4d_offset(pgd, addr);
+		p4d = p4d_offset(pgd, taddr);
 		if (p4d_present(*p4d)) {
 			pud = pud_offset(p4d, taddr);
 			if (pud_present(*pud)) {
@@ -170,7 +170,7 @@ static int __init hugetlb_setup_sz(char *str)
 	size = memparse(str, &str);
 	if (*str || !is_power_of_2(size) || !(tr_pages & size) ||
 		size <= PAGE_SIZE ||
-		size >= (1UL << PAGE_SHIFT << MAX_ORDER)) {
+		size > (1UL << PAGE_SHIFT << MAX_ORDER)) {
 		printk(KERN_WARNING "Invalid huge page size specified\n");
 		return 1;
 	}
diff --git a/arch/ia64/mm/ioremap.c b/arch/ia64/mm/ioremap.c
index 55fd3eb753ff..92b81bc91397 100644
--- a/arch/ia64/mm/ioremap.c
+++ b/arch/ia64/mm/ioremap.c
@@ -43,7 +43,7 @@ ioremap (unsigned long phys_addr, unsigned long size)
 	/*
 	 * For things in kern_memmap, we must use the same attribute
 	 * as the rest of the kernel.  For more details, see
-	 * Documentation/ia64/aliasing.rst.
+	 * Documentation/arch/ia64/aliasing.rst.
 	 */
 	attr = kern_mem_attribute(phys_addr, size);
 	if (attr & EFI_MEMORY_WB)
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 211757e34198..0a0328e61bef 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -448,7 +448,7 @@ pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
 		return -ENOSYS;
 
 	/*
-	 * Avoid attribute aliasing.  See Documentation/ia64/aliasing.rst
+	 * Avoid attribute aliasing.  See Documentation/arch/ia64/aliasing.rst
 	 * for more details.
 	 */
 	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index 7fd51257e0ed..f44f6ea54e46 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -53,8 +53,8 @@ config LOONGARCH
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
-	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
 	select ARCH_WANT_LD_ORPHAN_WARN
+	select ARCH_WANT_OPTIMIZE_VMEMMAP
 	select ARCH_WANTS_NO_INSTR
 	select BUILDTIME_TABLE_SORT
 	select COMMON_CLK
@@ -80,6 +80,7 @@ config LOONGARCH
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GPIOLIB
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_SECCOMP_FILTER
@@ -420,12 +421,9 @@ config NODES_SHIFT
 
 config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
-	range 14 64 if PAGE_SIZE_64KB
-	default "14" if PAGE_SIZE_64KB
-	range 12 64 if PAGE_SIZE_16KB
-	default "12" if PAGE_SIZE_16KB
-	range 11 64
-	default "11"
+	default "13" if PAGE_SIZE_64KB
+	default "11" if PAGE_SIZE_16KB
+	default "10"
 	help
 	  The kernel memory allocator divides physically contiguous memory
 	  blocks into "zones", where each zone is a power of two number of
@@ -434,9 +432,6 @@ config ARCH_FORCE_MAX_ORDER
 	  blocks of physically contiguous memory, then you may need to
 	  increase this value.
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
-
 	  The page size is not necessarily 4KB.  Keep this in mind
 	  when choosing a value for this option.
 
@@ -447,6 +442,22 @@ config ARCH_IOREMAP
 	  protection support. However, you can enable LoongArch DMW-based
 	  ioremap() for better performance.
 
+config ARCH_WRITECOMBINE
+	bool "Enable WriteCombine (WUC) for ioremap()"
+	help
+	  LoongArch maintains cache coherency in hardware, but when paired
+	  with LS7A chipsets the WUC attribute (Weak-ordered UnCached, which
+	  is similar to WriteCombine) is out of the scope of cache coherency
+	  machanism for PCIe devices (this is a PCIe protocol violation, which
+	  may be fixed in newer chipsets).
+
+	  This means WUC can only used for write-only memory regions now, so
+	  this option is disabled by default, making WUC silently fallback to
+	  SUC for ioremap(). You can enable this option if the kernel is ensured
+	  to run on hardware without this bug.
+
+	  You can override this setting via writecombine=on/off boot parameter.
+
 config ARCH_STRICT_ALIGN
 	bool "Enable -mstrict-align to prevent unaligned accesses" if EXPERT
 	default y
diff --git a/arch/loongarch/configs/loongson3_defconfig b/arch/loongarch/configs/loongson3_defconfig
index e18213f01cc4..6cd26dd3c134 100644
--- a/arch/loongarch/configs/loongson3_defconfig
+++ b/arch/loongarch/configs/loongson3_defconfig
@@ -487,7 +487,6 @@ CONFIG_CHELSIO_T4=m
 CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_IGB=y
-CONFIG_IXGB=y
 CONFIG_IXGBE=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MELLANOX is not set
diff --git a/arch/loongarch/include/asm/acpi.h b/arch/loongarch/include/asm/acpi.h
index 4198753aa1d0..976a810352c6 100644
--- a/arch/loongarch/include/asm/acpi.h
+++ b/arch/loongarch/include/asm/acpi.h
@@ -41,8 +41,11 @@ extern void loongarch_suspend_enter(void);
 
 static inline unsigned long acpi_get_wakeup_address(void)
 {
+#ifdef CONFIG_SUSPEND
 	extern void loongarch_wakeup_start(void);
 	return (unsigned long)loongarch_wakeup_start;
+#endif
+	return 0UL;
 }
 
 #endif /* _ASM_LOONGARCH_ACPI_H */
diff --git a/arch/loongarch/include/asm/addrspace.h b/arch/loongarch/include/asm/addrspace.h
index 8fb699b4d40a..5c9c03bdf915 100644
--- a/arch/loongarch/include/asm/addrspace.h
+++ b/arch/loongarch/include/asm/addrspace.h
@@ -71,9 +71,9 @@ extern unsigned long vm_map_base;
 #define _ATYPE32_	int
 #define _ATYPE64_	__s64
 #ifdef CONFIG_64BIT
-#define _CONST64_(x)	x ## L
+#define _CONST64_(x)	x ## UL
 #else
-#define _CONST64_(x)	x ## LL
+#define _CONST64_(x)	x ## ULL
 #endif
 #endif
 
diff --git a/arch/loongarch/include/asm/bootinfo.h b/arch/loongarch/include/asm/bootinfo.h
index 0051b526ac6d..c60796869b2b 100644
--- a/arch/loongarch/include/asm/bootinfo.h
+++ b/arch/loongarch/include/asm/bootinfo.h
@@ -13,7 +13,6 @@ const char *get_system_type(void);
 extern void init_environ(void);
 extern void memblock_init(void);
 extern void platform_init(void);
-extern void plat_swiotlb_setup(void);
 extern int __init init_numa_memory(void);
 
 struct loongson_board_info {
diff --git a/arch/loongarch/include/asm/cpu-features.h b/arch/loongarch/include/asm/cpu-features.h
index b07974218393..f6177f133477 100644
--- a/arch/loongarch/include/asm/cpu-features.h
+++ b/arch/loongarch/include/asm/cpu-features.h
@@ -42,6 +42,7 @@
 #define cpu_has_fpu		cpu_opt(LOONGARCH_CPU_FPU)
 #define cpu_has_lsx		cpu_opt(LOONGARCH_CPU_LSX)
 #define cpu_has_lasx		cpu_opt(LOONGARCH_CPU_LASX)
+#define cpu_has_crc32		cpu_opt(LOONGARCH_CPU_CRC32)
 #define cpu_has_complex		cpu_opt(LOONGARCH_CPU_COMPLEX)
 #define cpu_has_crypto		cpu_opt(LOONGARCH_CPU_CRYPTO)
 #define cpu_has_lvz		cpu_opt(LOONGARCH_CPU_LVZ)
diff --git a/arch/loongarch/include/asm/cpu.h b/arch/loongarch/include/asm/cpu.h
index c3da91759472..88773d849e33 100644
--- a/arch/loongarch/include/asm/cpu.h
+++ b/arch/loongarch/include/asm/cpu.h
@@ -78,25 +78,26 @@ enum cpu_type_enum {
 #define CPU_FEATURE_FPU			3	/* CPU has FPU */
 #define CPU_FEATURE_LSX			4	/* CPU has LSX (128-bit SIMD) */
 #define CPU_FEATURE_LASX		5	/* CPU has LASX (256-bit SIMD) */
-#define CPU_FEATURE_COMPLEX		6	/* CPU has Complex instructions */
-#define CPU_FEATURE_CRYPTO		7	/* CPU has Crypto instructions */
-#define CPU_FEATURE_LVZ			8	/* CPU has Virtualization extension */
-#define CPU_FEATURE_LBT_X86		9	/* CPU has X86 Binary Translation */
-#define CPU_FEATURE_LBT_ARM		10	/* CPU has ARM Binary Translation */
-#define CPU_FEATURE_LBT_MIPS		11	/* CPU has MIPS Binary Translation */
-#define CPU_FEATURE_TLB			12	/* CPU has TLB */
-#define CPU_FEATURE_CSR			13	/* CPU has CSR */
-#define CPU_FEATURE_WATCH		14	/* CPU has watchpoint registers */
-#define CPU_FEATURE_VINT		15	/* CPU has vectored interrupts */
-#define CPU_FEATURE_CSRIPI		16	/* CPU has CSR-IPI */
-#define CPU_FEATURE_EXTIOI		17	/* CPU has EXT-IOI */
-#define CPU_FEATURE_PREFETCH		18	/* CPU has prefetch instructions */
-#define CPU_FEATURE_PMP			19	/* CPU has perfermance counter */
-#define CPU_FEATURE_SCALEFREQ		20	/* CPU supports cpufreq scaling */
-#define CPU_FEATURE_FLATMODE		21	/* CPU has flat mode */
-#define CPU_FEATURE_EIODECODE		22	/* CPU has EXTIOI interrupt pin decode mode */
-#define CPU_FEATURE_GUESTID		23	/* CPU has GuestID feature */
-#define CPU_FEATURE_HYPERVISOR		24	/* CPU has hypervisor (running in VM) */
+#define CPU_FEATURE_CRC32		6	/* CPU has CRC32 instructions */
+#define CPU_FEATURE_COMPLEX		7	/* CPU has Complex instructions */
+#define CPU_FEATURE_CRYPTO		8	/* CPU has Crypto instructions */
+#define CPU_FEATURE_LVZ			9	/* CPU has Virtualization extension */
+#define CPU_FEATURE_LBT_X86		10	/* CPU has X86 Binary Translation */
+#define CPU_FEATURE_LBT_ARM		11	/* CPU has ARM Binary Translation */
+#define CPU_FEATURE_LBT_MIPS		12	/* CPU has MIPS Binary Translation */
+#define CPU_FEATURE_TLB			13	/* CPU has TLB */
+#define CPU_FEATURE_CSR			14	/* CPU has CSR */
+#define CPU_FEATURE_WATCH		15	/* CPU has watchpoint registers */
+#define CPU_FEATURE_VINT		16	/* CPU has vectored interrupts */
+#define CPU_FEATURE_CSRIPI		17	/* CPU has CSR-IPI */
+#define CPU_FEATURE_EXTIOI		18	/* CPU has EXT-IOI */
+#define CPU_FEATURE_PREFETCH		19	/* CPU has prefetch instructions */
+#define CPU_FEATURE_PMP			20	/* CPU has perfermance counter */
+#define CPU_FEATURE_SCALEFREQ		21	/* CPU supports cpufreq scaling */
+#define CPU_FEATURE_FLATMODE		22	/* CPU has flat mode */
+#define CPU_FEATURE_EIODECODE		23	/* CPU has EXTIOI interrupt pin decode mode */
+#define CPU_FEATURE_GUESTID		24	/* CPU has GuestID feature */
+#define CPU_FEATURE_HYPERVISOR		25	/* CPU has hypervisor (running in VM) */
 
 #define LOONGARCH_CPU_CPUCFG		BIT_ULL(CPU_FEATURE_CPUCFG)
 #define LOONGARCH_CPU_LAM		BIT_ULL(CPU_FEATURE_LAM)
@@ -104,6 +105,7 @@ enum cpu_type_enum {
 #define LOONGARCH_CPU_FPU		BIT_ULL(CPU_FEATURE_FPU)
 #define LOONGARCH_CPU_LSX		BIT_ULL(CPU_FEATURE_LSX)
 #define LOONGARCH_CPU_LASX		BIT_ULL(CPU_FEATURE_LASX)
+#define LOONGARCH_CPU_CRC32		BIT_ULL(CPU_FEATURE_CRC32)
 #define LOONGARCH_CPU_COMPLEX		BIT_ULL(CPU_FEATURE_COMPLEX)
 #define LOONGARCH_CPU_CRYPTO		BIT_ULL(CPU_FEATURE_CRYPTO)
 #define LOONGARCH_CPU_LVZ		BIT_ULL(CPU_FEATURE_LVZ)
diff --git a/arch/loongarch/include/asm/io.h b/arch/loongarch/include/asm/io.h
index 402a7d9e3a53..545e2708fbf7 100644
--- a/arch/loongarch/include/asm/io.h
+++ b/arch/loongarch/include/asm/io.h
@@ -54,8 +54,10 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
  * @offset:    bus address of the memory
  * @size:      size of the resource to map
  */
+extern pgprot_t pgprot_wc;
+
 #define ioremap_wc(offset, size)	\
-	ioremap_prot((offset), (size), pgprot_val(PAGE_KERNEL_WUC))
+	ioremap_prot((offset), (size), pgprot_val(pgprot_wc))
 
 #define ioremap_cache(offset, size)	\
 	ioremap_prot((offset), (size), pgprot_val(PAGE_KERNEL))
diff --git a/arch/loongarch/include/asm/loongarch.h b/arch/loongarch/include/asm/loongarch.h
index 65b7dcdea16d..83da5d29e2d1 100644
--- a/arch/loongarch/include/asm/loongarch.h
+++ b/arch/loongarch/include/asm/loongarch.h
@@ -117,7 +117,7 @@ static inline u32 read_cpucfg(u32 reg)
 #define  CPUCFG1_EP			BIT(22)
 #define  CPUCFG1_RPLV			BIT(23)
 #define  CPUCFG1_HUGEPG			BIT(24)
-#define  CPUCFG1_IOCSRBRD		BIT(25)
+#define  CPUCFG1_CRC32			BIT(25)
 #define  CPUCFG1_MSGINT			BIT(26)
 
 #define LOONGARCH_CPUCFG2		0x2
@@ -423,9 +423,9 @@ static __always_inline void iocsr_write64(u64 val, u32 reg)
 #define  CSR_ASID_ASID_WIDTH		10
 #define  CSR_ASID_ASID			(_ULCAST_(0x3ff) << CSR_ASID_ASID_SHIFT)
 
-#define LOONGARCH_CSR_PGDL		0x19	/* Page table base address when VA[47] = 0 */
+#define LOONGARCH_CSR_PGDL		0x19	/* Page table base address when VA[VALEN-1] = 0 */
 
-#define LOONGARCH_CSR_PGDH		0x1a	/* Page table base address when VA[47] = 1 */
+#define LOONGARCH_CSR_PGDH		0x1a	/* Page table base address when VA[VALEN-1] = 1 */
 
 #define LOONGARCH_CSR_PGD		0x1b	/* Page table base */
 
diff --git a/arch/loongarch/include/asm/module.lds.h b/arch/loongarch/include/asm/module.lds.h
index 438f09d4ccf4..88554f92e010 100644
--- a/arch/loongarch/include/asm/module.lds.h
+++ b/arch/loongarch/include/asm/module.lds.h
@@ -2,8 +2,8 @@
 /* Copyright (C) 2020-2022 Loongson Technology Corporation Limited */
 SECTIONS {
 	. = ALIGN(4);
-	.got : { BYTE(0) }
-	.plt : { BYTE(0) }
-	.plt.idx : { BYTE(0) }
-	.ftrace_trampoline : { BYTE(0) }
+	.got 0 : { BYTE(0) }
+	.plt 0 : { BYTE(0) }
+	.plt.idx 0 : { BYTE(0) }
+	.ftrace_trampoline 0 : { BYTE(0) }
 }
diff --git a/arch/loongarch/include/asm/smp.h b/arch/loongarch/include/asm/smp.h
index d82687390b4a..416b653bccb4 100644
--- a/arch/loongarch/include/asm/smp.h
+++ b/arch/loongarch/include/asm/smp.h
@@ -99,7 +99,7 @@ static inline void __cpu_die(unsigned int cpu)
 	loongson_cpu_die(cpu);
 }
 
-extern void play_dead(void);
+extern void __noreturn play_dead(void);
 #endif
 
 #endif /* __ASM_SMP_H */
diff --git a/arch/loongarch/include/uapi/asm/ptrace.h b/arch/loongarch/include/uapi/asm/ptrace.h
index cc48ed262021..82d811b5c6e9 100644
--- a/arch/loongarch/include/uapi/asm/ptrace.h
+++ b/arch/loongarch/include/uapi/asm/ptrace.h
@@ -47,11 +47,12 @@ struct user_fp_state {
 };
 
 struct user_watch_state {
-	uint16_t dbg_info;
+	uint64_t dbg_info;
 	struct {
 		uint64_t    addr;
 		uint64_t    mask;
 		uint32_t    ctrl;
+		uint32_t    pad;
 	} dbg_regs[8];
 };
 
diff --git a/arch/loongarch/kernel/cpu-probe.c b/arch/loongarch/kernel/cpu-probe.c
index 3a3fce2d7846..5adf0f736c6d 100644
--- a/arch/loongarch/kernel/cpu-probe.c
+++ b/arch/loongarch/kernel/cpu-probe.c
@@ -60,7 +60,7 @@ static inline void set_elf_platform(int cpu, const char *plat)
 
 /* MAP BASE */
 unsigned long vm_map_base;
-EXPORT_SYMBOL_GPL(vm_map_base);
+EXPORT_SYMBOL(vm_map_base);
 
 static void cpu_probe_addrbits(struct cpuinfo_loongarch *c)
 {
@@ -94,13 +94,18 @@ static void cpu_probe_common(struct cpuinfo_loongarch *c)
 	c->options = LOONGARCH_CPU_CPUCFG | LOONGARCH_CPU_CSR |
 		     LOONGARCH_CPU_TLB | LOONGARCH_CPU_VINT | LOONGARCH_CPU_WATCH;
 
-	elf_hwcap = HWCAP_LOONGARCH_CPUCFG | HWCAP_LOONGARCH_CRC32;
+	elf_hwcap = HWCAP_LOONGARCH_CPUCFG;
 
 	config = read_cpucfg(LOONGARCH_CPUCFG1);
 	if (config & CPUCFG1_UAL) {
 		c->options |= LOONGARCH_CPU_UAL;
 		elf_hwcap |= HWCAP_LOONGARCH_UAL;
 	}
+	if (config & CPUCFG1_CRC32) {
+		c->options |= LOONGARCH_CPU_CRC32;
+		elf_hwcap |= HWCAP_LOONGARCH_CRC32;
+	}
+
 
 	config = read_cpucfg(LOONGARCH_CPUCFG2);
 	if (config & CPUCFG2_LAM) {
diff --git a/arch/loongarch/kernel/proc.c b/arch/loongarch/kernel/proc.c
index 5c67cc4fd56d..0d82907b5404 100644
--- a/arch/loongarch/kernel/proc.c
+++ b/arch/loongarch/kernel/proc.c
@@ -76,6 +76,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (cpu_has_fpu)	seq_printf(m, " fpu");
 	if (cpu_has_lsx)	seq_printf(m, " lsx");
 	if (cpu_has_lasx)	seq_printf(m, " lasx");
+	if (cpu_has_crc32)	seq_printf(m, " crc32");
 	if (cpu_has_complex)	seq_printf(m, " complex");
 	if (cpu_has_crypto)	seq_printf(m, " crypto");
 	if (cpu_has_lvz)	seq_printf(m, " lvz");
diff --git a/arch/loongarch/kernel/process.c b/arch/loongarch/kernel/process.c
index fa2443c7afb2..b71e17c1cc0c 100644
--- a/arch/loongarch/kernel/process.c
+++ b/arch/loongarch/kernel/process.c
@@ -62,7 +62,7 @@ unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
 EXPORT_SYMBOL(boot_option_idle_override);
 
 #ifdef CONFIG_HOTPLUG_CPU
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	play_dead();
 }
diff --git a/arch/loongarch/kernel/ptrace.c b/arch/loongarch/kernel/ptrace.c
index 06bceae7d104..5fcffb452367 100644
--- a/arch/loongarch/kernel/ptrace.c
+++ b/arch/loongarch/kernel/ptrace.c
@@ -391,10 +391,10 @@ static int ptrace_hbp_fill_attr_ctrl(unsigned int note_type,
 	return 0;
 }
 
-static int ptrace_hbp_get_resource_info(unsigned int note_type, u16 *info)
+static int ptrace_hbp_get_resource_info(unsigned int note_type, u64 *info)
 {
 	u8 num;
-	u16 reg = 0;
+	u64 reg = 0;
 
 	switch (note_type) {
 	case NT_LOONGARCH_HW_BREAK:
@@ -524,15 +524,16 @@ static int ptrace_hbp_set_addr(unsigned int note_type,
 	return modify_user_hw_breakpoint(bp, &attr);
 }
 
-#define PTRACE_HBP_CTRL_SZ	sizeof(u32)
 #define PTRACE_HBP_ADDR_SZ	sizeof(u64)
 #define PTRACE_HBP_MASK_SZ	sizeof(u64)
+#define PTRACE_HBP_CTRL_SZ	sizeof(u32)
+#define PTRACE_HBP_PAD_SZ	sizeof(u32)
 
 static int hw_break_get(struct task_struct *target,
 			const struct user_regset *regset,
 			struct membuf to)
 {
-	u16 info;
+	u64 info;
 	u32 ctrl;
 	u64 addr, mask;
 	int ret, idx = 0;
@@ -545,7 +546,7 @@ static int hw_break_get(struct task_struct *target,
 
 	membuf_write(&to, &info, sizeof(info));
 
-	/* (address, ctrl) registers */
+	/* (address, mask, ctrl) registers */
 	while (to.left) {
 		ret = ptrace_hbp_get_addr(note_type, target, idx, &addr);
 		if (ret)
@@ -562,6 +563,7 @@ static int hw_break_get(struct task_struct *target,
 		membuf_store(&to, addr);
 		membuf_store(&to, mask);
 		membuf_store(&to, ctrl);
+		membuf_zero(&to, sizeof(u32));
 		idx++;
 	}
 
@@ -582,7 +584,7 @@ static int hw_break_set(struct task_struct *target,
 	offset = offsetof(struct user_watch_state, dbg_regs);
 	user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, offset);
 
-	/* (address, ctrl) registers */
+	/* (address, mask, ctrl) registers */
 	limit = regset->n * regset->size;
 	while (count && offset < limit) {
 		if (count < PTRACE_HBP_ADDR_SZ)
@@ -602,7 +604,7 @@ static int hw_break_set(struct task_struct *target,
 			break;
 
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &mask,
-					 offset, offset + PTRACE_HBP_ADDR_SZ);
+					 offset, offset + PTRACE_HBP_MASK_SZ);
 		if (ret)
 			return ret;
 
@@ -611,8 +613,8 @@ static int hw_break_set(struct task_struct *target,
 			return ret;
 		offset += PTRACE_HBP_MASK_SZ;
 
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &mask,
-					 offset, offset + PTRACE_HBP_MASK_SZ);
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ctrl,
+					 offset, offset + PTRACE_HBP_CTRL_SZ);
 		if (ret)
 			return ret;
 
@@ -620,6 +622,11 @@ static int hw_break_set(struct task_struct *target,
 		if (ret)
 			return ret;
 		offset += PTRACE_HBP_CTRL_SZ;
+
+		user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					  offset, offset + PTRACE_HBP_PAD_SZ);
+		offset += PTRACE_HBP_PAD_SZ;
+
 		idx++;
 	}
 
diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
index bae84ccf6d36..4444b13418f0 100644
--- a/arch/loongarch/kernel/setup.c
+++ b/arch/loongarch/kernel/setup.c
@@ -160,6 +160,27 @@ static void __init smbios_parse(void)
 	dmi_walk(find_tokens, NULL);
 }
 
+#ifdef CONFIG_ARCH_WRITECOMBINE
+pgprot_t pgprot_wc = PAGE_KERNEL_WUC;
+#else
+pgprot_t pgprot_wc = PAGE_KERNEL_SUC;
+#endif
+
+EXPORT_SYMBOL(pgprot_wc);
+
+static int __init setup_writecombine(char *p)
+{
+	if (!strcmp(p, "on"))
+		pgprot_wc = PAGE_KERNEL_WUC;
+	else if (!strcmp(p, "off"))
+		pgprot_wc = PAGE_KERNEL_SUC;
+	else
+		pr_warn("Unknown writecombine setting \"%s\".\n", p);
+
+	return 0;
+}
+early_param("writecombine", setup_writecombine);
+
 static int usermem __initdata;
 
 static int __init early_parse_mem(char *p)
@@ -368,8 +389,8 @@ static void __init arch_mem_init(char **cmdline_p)
 	/*
 	 * In order to reduce the possibility of kernel panic when failed to
 	 * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
-	 * low memory as small as possible before plat_swiotlb_setup(), so
-	 * make sparse_init() using top-down allocation.
+	 * low memory as small as possible before swiotlb_init(), so make
+	 * sparse_init() using top-down allocation.
 	 */
 	memblock_set_bottom_up(false);
 	sparse_init();
diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c
index 83225610a148..ed167e244cda 100644
--- a/arch/loongarch/kernel/smp.c
+++ b/arch/loongarch/kernel/smp.c
@@ -336,7 +336,7 @@ void play_dead(void)
 	iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR);
 
 	init_fn();
-	unreachable();
+	BUG();
 }
 
 #endif
diff --git a/arch/loongarch/kernel/stacktrace.c b/arch/loongarch/kernel/stacktrace.c
index 3a690f96f00c..2463d2fea21f 100644
--- a/arch/loongarch/kernel/stacktrace.c
+++ b/arch/loongarch/kernel/stacktrace.c
@@ -30,7 +30,7 @@ void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie,
 
 	regs->regs[1] = 0;
 	for (unwind_start(&state, task, regs);
-	      !unwind_done(&state); unwind_next_frame(&state)) {
+	     !unwind_done(&state) && !unwind_error(&state); unwind_next_frame(&state)) {
 		addr = unwind_get_return_address(&state);
 		if (!addr || !consume_entry(cookie, addr))
 			break;
diff --git a/arch/loongarch/kernel/unwind.c b/arch/loongarch/kernel/unwind.c
index a463d6961344..ba324ba76fa1 100644
--- a/arch/loongarch/kernel/unwind.c
+++ b/arch/loongarch/kernel/unwind.c
@@ -28,5 +28,6 @@ bool default_next_frame(struct unwind_state *state)
 
 	} while (!get_stack_info(state->sp, state->task, info));
 
+	state->error = true;
 	return false;
 }
diff --git a/arch/loongarch/kernel/unwind_prologue.c b/arch/loongarch/kernel/unwind_prologue.c
index 9095fde8e55d..55afc27320e1 100644
--- a/arch/loongarch/kernel/unwind_prologue.c
+++ b/arch/loongarch/kernel/unwind_prologue.c
@@ -211,7 +211,7 @@ static bool next_frame(struct unwind_state *state)
 			pc = regs->csr_era;
 
 			if (user_mode(regs) || !__kernel_text_address(pc))
-				return false;
+				goto out;
 
 			state->first = true;
 			state->pc = pc;
@@ -226,6 +226,8 @@ static bool next_frame(struct unwind_state *state)
 
 	} while (!get_stack_info(state->sp, state->task, info));
 
+out:
+	state->error = true;
 	return false;
 }
 
diff --git a/arch/loongarch/mm/init.c b/arch/loongarch/mm/init.c
index e018aed34586..3b7d8129570b 100644
--- a/arch/loongarch/mm/init.c
+++ b/arch/loongarch/mm/init.c
@@ -41,7 +41,7 @@
  * don't have to care about aliases on other CPUs.
  */
 unsigned long empty_zero_page, zero_page_mask;
-EXPORT_SYMBOL_GPL(empty_zero_page);
+EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(zero_page_mask);
 
 void setup_zero_pages(void)
@@ -270,7 +270,7 @@ pud_t invalid_pud_table[PTRS_PER_PUD] __page_aligned_bss;
 #endif
 #ifndef __PAGETABLE_PMD_FOLDED
 pmd_t invalid_pmd_table[PTRS_PER_PMD] __page_aligned_bss;
-EXPORT_SYMBOL_GPL(invalid_pmd_table);
+EXPORT_SYMBOL(invalid_pmd_table);
 #endif
 pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned_bss;
 EXPORT_SYMBOL(invalid_pte_table);
diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c
index 288003a9f0ca..db9342b2d0e6 100644
--- a/arch/loongarch/net/bpf_jit.c
+++ b/arch/loongarch/net/bpf_jit.c
@@ -1022,6 +1022,10 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 		emit_atomic(insn, ctx);
 		break;
 
+	/* Speculation barrier */
+	case BPF_ST | BPF_NOSPEC:
+		break;
+
 	default:
 		pr_err("bpf_jit: unknown opcode %02x\n", code);
 		return -EINVAL;
@@ -1248,3 +1252,9 @@ out:
 
 	return prog;
 }
+
+/* Indicate the JIT backend supports mixing bpf2bpf and tailcalls. */
+bool bpf_jit_supports_subprog_tailcalls(void)
+{
+	return true;
+}
diff --git a/arch/loongarch/power/suspend_asm.S b/arch/loongarch/power/suspend_asm.S
index 90da899c06a1..e2fc3b4e31f0 100644
--- a/arch/loongarch/power/suspend_asm.S
+++ b/arch/loongarch/power/suspend_asm.S
@@ -80,6 +80,10 @@ SYM_INNER_LABEL(loongarch_wakeup_start, SYM_L_GLOBAL)
 
 	JUMP_VIRT_ADDR	t0, t1
 
+	/* Enable PG */
+	li.w		t0, 0xb0		# PLV=0, IE=0, PG=1
+	csrwr		t0, LOONGARCH_CSR_CRMD
+
 	la.pcrel	t0, acpi_saved_sp
 	ld.d		sp, t0, 0
 	SETUP_WAKEUP
diff --git a/arch/loongarch/vdso/Makefile b/arch/loongarch/vdso/Makefile
index d89e2ac75f7b..461240ab4436 100644
--- a/arch/loongarch/vdso/Makefile
+++ b/arch/loongarch/vdso/Makefile
@@ -1,9 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # Objects to go into the VDSO.
 
-# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before
-# the inclusion of generic Makefile.
-ARCH_REL_TYPE_ABS := R_LARCH_32|R_LARCH_64|R_LARCH_MARK_LA|R_LARCH_JUMP_SLOT
+# Include the generic Makefile to check the built vdso.
 include $(srctree)/lib/vdso/Makefile
 
 obj-vdso-y := elf.o vgetcpu.o vgettimeofday.o sigreturn.o
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 82154952e574..40198a1ebe27 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -18,6 +18,7 @@ config M68K
 	select GENERIC_CPU_DEVICES
 	select GENERIC_IOMAP
 	select GENERIC_IRQ_SHOW
+	select HAS_IOPORT if PCI || ISA || ATARI_ROM_ISA
 	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ASM_MODVERSIONS
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 9380f6e3bb66..b826e9c677b2 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -24,7 +24,6 @@ config M68KCLASSIC
 
 config COLDFIRE
 	bool "Coldfire CPU family support"
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select CPU_HAS_NO_BITFIELDS
 	select CPU_HAS_NO_CAS
 	select CPU_HAS_NO_MULDIV64
@@ -398,23 +397,22 @@ config SINGLE_MEMORY_CHUNK
 	  Say N if not sure.
 
 config ARCH_FORCE_MAX_ORDER
-	int "Maximum zone order" if ADVANCED
+	int "Order of maximal physically contiguous allocations" if ADVANCED
 	depends on !SINGLE_MEMORY_CHUNK
-	default "11"
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
 	  For systems that have holes in their physical address space this
 	  value also defines the minimal size of the hole that allows
 	  freeing unused memory map.
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  Don't change if unsure.
 
 config 060_WRITETHROUGH
 	bool "Use write-through caching for 68060 supervisor accesses"
diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug
index 465e28be0ce4..30638a6e8edc 100644
--- a/arch/m68k/Kconfig.debug
+++ b/arch/m68k/Kconfig.debug
@@ -36,11 +36,6 @@ config HIGHPROFILE
 	help
 	  Use a fast secondary clock to produce profiling information.
 
-config NO_KERNEL_MSG
-	bool "Suppress Kernel BUG Messages"
-	help
-	  Do not output any debug BUG messages within the kernel.
-
 config BDM_DISABLE
 	bool "Disable BDM signals"
 	depends on COLDFIRE
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index e2f961208f18..28eebabfd34b 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -11,7 +11,7 @@ config AMIGA
 	help
 	  This option enables support for the Amiga series of computers. If
 	  you plan to use this kernel on an Amiga, say Y here and browse the
-	  material available in <file:Documentation/m68k>; otherwise say N.
+	  material available in <file:Documentation/arch/m68k>; otherwise say N.
 
 config ATARI
 	bool "Atari support"
@@ -23,7 +23,7 @@ config ATARI
 	  This option enables support for the 68000-based Atari series of
 	  computers (including the TT, Falcon and Medusa). If you plan to use
 	  this kernel on an Atari, say Y here and browse the material
-	  available in <file:Documentation/m68k>; otherwise say N.
+	  available in <file:Documentation/arch/m68k>; otherwise say N.
 
 config ATARI_KBD_CORE
 	bool
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index ec2d792015a4..b26469a65bc1 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -214,7 +214,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -495,6 +494,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -621,6 +621,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 061a07824dc2..944a49a129be 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -210,7 +210,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -452,6 +451,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -577,6 +577,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 02af5f501dae..a32dd884fcce 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -217,7 +217,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -472,6 +471,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -598,6 +598,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 0d5832cb3e10..23b7805309bd 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -207,7 +207,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -444,6 +443,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -569,6 +569,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index c246c3538839..5605ab5c3dcf 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -209,7 +209,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -454,6 +453,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -579,6 +579,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 98d2d0599e5a..d0d1f9c33756 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -208,7 +208,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -474,6 +473,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -600,6 +600,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index b2d5ec6ba625..6d04314ce7ea 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -228,7 +228,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -314,7 +313,6 @@ CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
 CONFIG_PSAMPLE=m
 CONFIG_NET_IFE=m
-CONFIG_PCCARD=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
@@ -561,6 +559,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -687,6 +686,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index d3420c642992..e6f5ae526d08 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -206,7 +206,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -443,6 +442,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -568,6 +568,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index e294b0b67695..f2d4dff4787a 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -207,7 +207,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -444,6 +443,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -569,6 +569,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 764a94b08936..907eedecd040 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -208,7 +208,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -461,6 +460,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -587,6 +587,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index d4eeddac6bb8..9e3d47008f21 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -204,7 +204,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -443,6 +442,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -567,6 +567,7 @@ CONFIG_TEST_LOCKUP=m
 CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index ca359b880683..f6540078cb4b 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -204,7 +204,6 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -442,6 +441,7 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
+CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -567,6 +567,7 @@ CONFIG_WW_MUTEX_SELFTEST=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_KUNIT=m
 CONFIG_KUNIT_ALL_TESTS=m
+CONFIG_TEST_DHRY=m
 CONFIG_TEST_MIN_HEAP=m
 CONFIG_TEST_DIV64=m
 CONFIG_REED_SOLOMON_TEST=m
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
deleted file mode 100644
index 5cfc0996ba94..000000000000
--- a/arch/m68k/include/asm/gpio.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
-*/
-
-#ifndef coldfire_gpio_h
-#define coldfire_gpio_h
-
-#include <linux/io.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-/*
- * The Generic GPIO functions
- *
- * If the gpio is a compile time constant and is one of the Coldfire gpios,
- * use the inline version, otherwise dispatch thru gpiolib.
- */
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
-		return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) {
-		if (gpio < MCFGPIO_SCR_START) {
-			unsigned long flags;
-			MCFGPIO_PORTTYPE data;
-
-			local_irq_save(flags);
-			data = mcfgpio_read(__mcfgpio_podr(gpio));
-			if (value)
-				data |= mcfgpio_bit(gpio);
-			else
-				data &= ~mcfgpio_bit(gpio);
-			mcfgpio_write(data, __mcfgpio_podr(gpio));
-			local_irq_restore(flags);
-		} else {
-			if (value)
-				mcfgpio_write(mcfgpio_bit(gpio),
-						MCFGPIO_SETR_PORT(gpio));
-			else
-				mcfgpio_write(~mcfgpio_bit(gpio),
-						MCFGPIO_CLRR_PORT(gpio));
-		}
-	} else
-		__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-#if defined(MCFGPIO_IRQ_MIN)
-	if ((gpio >= MCFGPIO_IRQ_MIN) && (gpio < MCFGPIO_IRQ_MAX))
-#else
-	if (gpio < MCFGPIO_IRQ_MAX)
-#endif
-		return gpio + MCFGPIO_IRQ_VECBASE;
-	else
-		return __gpio_to_irq(gpio);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio);
-}
-
-#ifndef CONFIG_GPIOLIB
-static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
-{
-	int err;
-
-	err = gpio_request(gpio, label);
-	if (err)
-		return err;
-
-	if (flags & GPIOF_DIR_IN)
-		err = gpio_direction_input(gpio);
-	else
-		err = gpio_direction_output(gpio,
-			(flags & GPIOF_INIT_HIGH) ? 1 : 0);
-
-	if (err)
-		gpio_free(gpio);
-
-	return err;
-}
-#endif /* !CONFIG_GPIOLIB */
-#endif
diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
index 13741c1245e1..d97fbb812f63 100644
--- a/arch/m68k/include/asm/mcf_pgtable.h
+++ b/arch/m68k/include/asm/mcf_pgtable.h
@@ -46,7 +46,7 @@
 #define _CACHEMASK040		(~0x060)
 #define _PAGE_GLOBAL040		0x400   /* 68040 global bit, used for kva descs */
 
-/* We borrow bit 24 to store the exclusive marker in swap PTEs. */
+/* We borrow bit 7 to store the exclusive marker in swap PTEs. */
 #define _PAGE_SWP_EXCLUSIVE	CF_PAGE_NOCACHE
 
 /*
diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h
index 27f32cc81da6..2cefe8445980 100644
--- a/arch/m68k/include/asm/mcfgpio.h
+++ b/arch/m68k/include/asm/mcfgpio.h
@@ -9,7 +9,7 @@
 #define mcfgpio_h
 
 #ifdef CONFIG_GPIOLIB
-#include <asm-generic/gpio.h>
+#include <linux/gpio.h>
 #else
 
 int __mcfgpio_get_value(unsigned gpio);
diff --git a/arch/m68k/kernel/machine_kexec.c b/arch/m68k/kernel/machine_kexec.c
index 206f84983120..739875540e89 100644
--- a/arch/m68k/kernel/machine_kexec.c
+++ b/arch/m68k/kernel/machine_kexec.c
@@ -6,6 +6,7 @@
 #include <linux/kexec.h>
 #include <linux/mm.h>
 #include <linux/delay.h>
+#include <linux/reboot.h>
 
 #include <asm/cacheflush.h>
 #include <asm/page.h>
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index cc88af6fa7a4..211f338d6235 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -21,6 +21,7 @@ config MICROBLAZE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
+	select HAS_IOPORT if PCI
 	select HAVE_ARCH_HASH
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 5d04438ee12e..caad195ba5c1 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -29,7 +29,6 @@ platform-$(CONFIG_SGI_IP30)		+= sgi-ip30/
 platform-$(CONFIG_SGI_IP32)		+= sgi-ip32/
 platform-$(CONFIG_SIBYTE_BCM112X)	+= sibyte/
 platform-$(CONFIG_SIBYTE_SB1250)	+= sibyte/
-platform-$(CONFIG_SIBYTE_BCM1x55)	+= sibyte/
 platform-$(CONFIG_SIBYTE_BCM1x80)	+= sibyte/
 platform-$(CONFIG_SNI_RM)		+= sni/
 platform-$(CONFIG_MACH_TX49XX)		+= txx9/
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e2f3ca73f40d..c2f5498d207f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -16,7 +16,6 @@ config MIPS
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_KEEP_MEMBLOCK
-	select ARCH_SUPPORTS_UPROBES
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
 	select ARCH_USE_MEMTEST
@@ -47,6 +46,7 @@ config MIPS
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GUP_GET_PXX_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT
+	select HAS_IOPORT if !NO_IOPORT_MAP || ISA
 	select HAVE_ARCH_COMPILER_H
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_KGDB if MIPS_FP_SUPPORT
@@ -63,10 +63,7 @@ config MIPS
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
-	select HAVE_EBPF_JIT if !CPU_MICROMIPS && \
-				!CPU_DADDI_WORKAROUNDS && \
-				!CPU_R4000_WORKAROUNDS && \
-				!CPU_R4400_WORKAROUNDS
+	select HAVE_EBPF_JIT if !CPU_MICROMIPS
 	select HAVE_EXIT_THREAD
 	select HAVE_FAST_GUP
 	select HAVE_FTRACE_MCOUNT_RECORD
@@ -115,7 +112,6 @@ config MACH_INGENIC
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_ZBOOT
 	select DMA_NONCOHERENT
-	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select IRQ_MIPS_CPU
 	select PINCTRL
 	select GPIOLIB
@@ -134,7 +130,6 @@ choice
 
 config MIPS_GENERIC_KERNEL
 	bool "Generic board-agnostic MIPS kernel"
-	select ARCH_HAS_SETUP_DMA_OPS
 	select MIPS_GENERIC
 	select BOOT_RAW
 	select BUILTIN_DTB
@@ -490,7 +485,6 @@ config MACH_LOONGSON64
 	select BOARD_SCACHE
 	select CSRC_R4K
 	select CEVT_R4K
-	select CPU_HAS_WB
 	select FORCE_PCI
 	select ISA
 	select I8259
@@ -567,7 +561,6 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MICROMIPS
 	select SYS_SUPPORTS_MIPS16
-	select SYS_SUPPORTS_MIPS_CMP
 	select SYS_SUPPORTS_MIPS_CPS
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_RELOCATABLE
@@ -795,24 +788,6 @@ config SGI_IP32
 	help
 	  If you want this kernel to run on SGI O2 workstation, say Y here.
 
-config SIBYTE_CRHINE
-	bool "Sibyte BCM91120C-CRhine"
-	select BOOT_ELF32
-	select SIBYTE_BCM1120
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_SB1
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config SIBYTE_CARMEL
-	bool "Sibyte BCM91120x-Carmel"
-	select BOOT_ELF32
-	select SIBYTE_BCM1120
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_SB1
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
 	select BOOT_ELF32
@@ -826,7 +801,7 @@ config SIBYTE_CRHONE
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
 	select BOOT_ELF32
-	select SIBYTE_BCM1125H
+	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -1077,7 +1052,7 @@ config FW_CFE
 	bool
 
 config ARCH_SUPPORTS_UPROBES
-	bool
+	def_bool y
 
 config DMA_NONCOHERENT
 	bool
@@ -1088,8 +1063,10 @@ config DMA_NONCOHERENT
 	# by pgprot_writcombine can be mixed, and the latter sometimes provides
 	# significant advantages.
 	#
+	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_DMA_WRITE_COMBINE
 	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_HAS_DMA_SET_UNCACHED
 	select DMA_NONCOHERENT_MMAP
@@ -1183,12 +1160,6 @@ config SYS_SUPPORTS_LITTLE_ENDIAN
 config MIPS_HUGE_TLB_SUPPORT
 	def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE
 
-config IRQ_MSP_SLP
-	bool
-
-config IRQ_MSP_CIC
-	bool
-
 config IRQ_TXX9
 	bool
 
@@ -1366,7 +1337,6 @@ config CPU_LOONGSON2F
 	bool "Loongson 2F"
 	depends on SYS_HAS_CPU_LOONGSON2F
 	select CPU_LOONGSON2EF
-	select GPIOLIB
 	help
 	  The Loongson 2F processor implements the MIPS III instruction set
 	  with many extensions.
@@ -1788,7 +1758,6 @@ config CPU_LOONGSON2EF
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
-	select ARCH_HAS_PHYS_TO_DMA
 
 config CPU_LOONGSON32
 	bool
@@ -1853,11 +1822,9 @@ config SYS_HAS_CPU_MIPS32_R3_5
 
 config SYS_HAS_CPU_MIPS32_R5
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_MIPS32_R6
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_MIPS64_R1
 	bool
@@ -1867,15 +1834,12 @@ config SYS_HAS_CPU_MIPS64_R2
 
 config SYS_HAS_CPU_MIPS64_R5
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_MIPS64_R6
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_P5600
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_R3000
 	bool
@@ -1900,7 +1864,6 @@ config SYS_HAS_CPU_NEVADA
 
 config SYS_HAS_CPU_R10000
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_RM7000
 	bool
@@ -1929,7 +1892,6 @@ config SYS_HAS_CPU_BMIPS4380
 config SYS_HAS_CPU_BMIPS5000
 	bool
 	select SYS_HAS_CPU_BMIPS
-	select ARCH_HAS_SYNC_DMA_FOR_CPU
 
 #
 # CPU may reorder R->R, R->W, W->R, W->W
@@ -2137,14 +2099,10 @@ endchoice
 
 config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
-	range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
-	default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
-	range 13 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
-	default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
-	range 12 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
-	default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
-	range 0 64
-	default "11"
+	default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
+	default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
+	default "11" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
+	default "10"
 	help
 	  The kernel memory allocator divides physically contiguous memory
 	  blocks into "zones", where each zone is a power of two number of
@@ -2153,9 +2111,6 @@ config ARCH_FORCE_MAX_ORDER
 	  blocks of physically contiguous memory, then you may need to
 	  increase this value.
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
-
 	  The page size is not necessarily 4KB.  Keep this in mind
 	  when choosing a value for this option.
 
@@ -2300,15 +2255,10 @@ config MIPS_VPE_LOADER
 	  Includes a loader for loading an elf relocatable object
 	  onto another VPE and running it.
 
-config MIPS_VPE_LOADER_CMP
-	bool
-	default "y"
-	depends on MIPS_VPE_LOADER && MIPS_CMP
-
 config MIPS_VPE_LOADER_MT
 	bool
 	default "y"
-	depends on MIPS_VPE_LOADER && !MIPS_CMP
+	depends on MIPS_VPE_LOADER
 
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
@@ -2324,31 +2274,10 @@ config MIPS_VPE_APSP_API
 	bool "Enable support for AP/SP API (RTLX)"
 	depends on MIPS_VPE_LOADER
 
-config MIPS_VPE_APSP_API_CMP
-	bool
-	default "y"
-	depends on MIPS_VPE_APSP_API && MIPS_CMP
-
 config MIPS_VPE_APSP_API_MT
 	bool
 	default "y"
-	depends on MIPS_VPE_APSP_API && !MIPS_CMP
-
-config MIPS_CMP
-	bool "MIPS CMP framework support (DEPRECATED)"
-	depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6
-	select SMP
-	select SYNC_R4K
-	select SYS_SUPPORTS_SMP
-	select WEAK_ORDERING
-	default n
-	help
-	  Select this if you are using a bootloader which implements the "CMP
-	  framework" protocol (ie. YAMON) and want your kernel to make use of
-	  its ability to start secondary CPUs.
-
-	  Unless you have a specific need, you should use CONFIG_MIPS_CPS
-	  instead of this.
+	depends on MIPS_VPE_APSP_API
 
 config MIPS_CPS
 	bool "MIPS Coherent Processing System support"
@@ -2804,9 +2733,6 @@ config HOTPLUG_CPU
 config SMP_UP
 	bool
 
-config SYS_SUPPORTS_MIPS_CMP
-	bool
-
 config SYS_SUPPORTS_MIPS_CPS
 	bool
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 04e46ec24319..a7a4ee66a9d3 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -181,9 +181,47 @@ endif
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
 cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
 
+cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -Wa,--trap
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi)
+ifdef CONFIG_CPU_LOONGSON64
+cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
+cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
+cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
+endif
+cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi)
+
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
 cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
+cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
+endif
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON64)	+= $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
 
 # For smartmips configurations, there are hundreds of warnings due to ISA overrides
 # in assembly and header files. smartmips is only supported for MIPS32r1 onwards
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
index ae0e01b9438f..4ed833b9cc2f 100644
--- a/arch/mips/ar7/gpio.c
+++ b/arch/mips/ar7/gpio.c
@@ -7,7 +7,7 @@
 
 #include <linux/init.h>
 #include <linux/export.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <asm/mach-ar7/ar7.h>
 
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 7367416642cb..04154128c4de 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -29,20 +29,4 @@ config SOC_QCA955X
 config PCI_AR724X
 	def_bool n
 
-config ATH79_DEV_GPIO_BUTTONS
-	def_bool n
-
-config ATH79_DEV_LEDS_GPIO
-	def_bool n
-
-config ATH79_DEV_SPI
-	def_bool n
-
-config ATH79_DEV_USB
-	def_bool n
-
-config ATH79_DEV_WMAC
-	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-	def_bool n
-
 endif
diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c
index 90fb48b046c0..b487f687f62d 100644
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -193,6 +193,7 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
 /* boardtype, boardnum, boardrev */
 static const
 struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
+	{{BCM47XX_BOARD_HUAWEI_B593U_12, "Huawei B593u-12"}, "0x053d", "1234", "0x1301"},
 	{{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
 	{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
 	{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
diff --git a/arch/mips/bcm47xx/leds.c b/arch/mips/bcm47xx/leds.c
index 8e257d0896d2..64e37505b9b4 100644
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -223,6 +223,11 @@ bcm47xx_leds_dlink_dir330[] __initconst = {
 /* Huawei */
 
 static const struct gpio_led
+bcm47xx_leds_huawei_b593u_12[] __initconst = {
+	BCM47XX_GPIO_LED(5, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
 bcm47xx_leds_huawei_e970[] __initconst = {
 	BCM47XX_GPIO_LED(0, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
 };
@@ -672,6 +677,9 @@ void __init bcm47xx_leds_register(void)
 		bcm47xx_set_pdata(bcm47xx_leds_dlink_dir330);
 		break;
 
+	case BCM47XX_BOARD_HUAWEI_B593U_12:
+		bcm47xx_set_pdata(bcm47xx_leds_huawei_b593u_12);
+		break;
 	case BCM47XX_BOARD_HUAWEI_E970:
 		bcm47xx_set_pdata(bcm47xx_leds_huawei_e970);
 		break;
diff --git a/arch/mips/bmips/dma.c b/arch/mips/bmips/dma.c
index 33788668cbdb..3779e7855bd7 100644
--- a/arch/mips/bmips/dma.c
+++ b/arch/mips/bmips/dma.c
@@ -5,6 +5,8 @@
 #include <asm/bmips.h>
 #include <asm/io.h>
 
+bool bmips_rac_flush_disable;
+
 void arch_sync_dma_for_cpu_all(void)
 {
 	void __iomem *cbr = BMIPS_GET_CBR();
@@ -15,6 +17,9 @@ void arch_sync_dma_for_cpu_all(void)
 	    boot_cpu_type() != CPU_BMIPS4380)
 		return;
 
+	if (unlikely(bmips_rac_flush_disable))
+		return;
+
 	/* Flush stale data out of the readahead cache */
 	cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
 	__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index e95b3f78e7cd..549a6392a3d2 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -35,6 +35,8 @@
 #define REG_BCM6328_OTP		((void __iomem *)CKSEG1ADDR(0x1000062c))
 #define BCM6328_TP1_DISABLED	BIT(9)
 
+extern bool bmips_rac_flush_disable;
+
 static const unsigned long kbase = VMLINUX_LOAD_ADDRESS & 0xfff00000;
 
 struct bmips_quirk {
@@ -104,6 +106,12 @@ static void bcm6358_quirks(void)
 	 * disable SMP for now
 	 */
 	bmips_smp_enabled = 0;
+
+	/*
+	 * RAC flush causes kernel panics on BCM6358 when booting from TP1
+	 * because the bootloader is not initializing it properly.
+	 */
+	bmips_rac_flush_disable = !!(read_c0_brcm_cmt_local() & (1 << 31));
 }
 
 static void bcm6368_quirks(void)
diff --git a/arch/mips/boot/tools/relocs.c b/arch/mips/boot/tools/relocs.c
index 02fc85f3e8ff..a88d66c46d7f 100644
--- a/arch/mips/boot/tools/relocs.c
+++ b/arch/mips/boot/tools/relocs.c
@@ -245,7 +245,7 @@ static void read_ehdr(FILE *fp)
 		die("Unknown ELF version\n");
 
 	if (ehdr.e_ehsize != sizeof(Elf_Ehdr))
-		die("Bad Elf header size\n");
+		die("Bad ELF header size\n");
 
 	if (ehdr.e_phentsize != sizeof(Elf_Phdr))
 		die("Bad program header entry\n");
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index c1899f109e19..450e979ef5d9 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -14,7 +14,8 @@ config CAVIUM_CN63XXP1
 config CAVIUM_OCTEON_CVMSEG_SIZE
 	int "Number of L1 cache lines reserved for CVMSEG memory"
 	range 0 54
-	default 1
+	default 0 if !CAVIUM_OCTEON_SOC
+	default 1 if CAVIUM_OCTEON_SOC
 	help
 	  CVMSEG LM is a segment that accesses portions of the dcache as a
 	  local memory; the larger CVMSEG is, the smaller the cache is.
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index fd8043f6ff8a..8425a6b38aa2 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -2290,7 +2290,7 @@ static irqreturn_t octeon_irq_cib_handler(int my_irq, void *data)
 static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 				      struct device_node *parent)
 {
-	const __be32 *addr;
+	struct resource res;
 	u32 val;
 	struct octeon_irq_cib_host_data *host_data;
 	int parent_irq;
@@ -2309,21 +2309,19 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 		return -ENOMEM;
 	raw_spin_lock_init(&host_data->lock);
 
-	addr = of_get_address(ciu_node, 0, NULL, NULL);
-	if (!addr) {
+	r = of_address_to_resource(ciu_node, 0, &res);
+	if (r) {
 		pr_err("ERROR: Couldn't acquire reg(0) %pOFn\n", ciu_node);
-		return -EINVAL;
+		return r;
 	}
-	host_data->raw_reg = (u64)phys_to_virt(
-		of_translate_address(ciu_node, addr));
+	host_data->raw_reg = (u64)phys_to_virt(res.start);
 
-	addr = of_get_address(ciu_node, 1, NULL, NULL);
-	if (!addr) {
+	r = of_address_to_resource(ciu_node, 1, &res);
+	if (r) {
 		pr_err("ERROR: Couldn't acquire reg(1) %pOFn\n", ciu_node);
-		return -EINVAL;
+		return r;
 	}
-	host_data->en_reg = (u64)phys_to_virt(
-		of_translate_address(ciu_node, addr));
+	host_data->en_reg = (u64)phys_to_virt(res.start);
 
 	r = of_property_read_u32(ciu_node, "cavium,max-bits", &val);
 	if (r) {
@@ -2874,11 +2872,11 @@ static struct irq_chip octeon_irq_chip_ciu3_mbox = {
 static int __init octeon_irq_init_ciu3(struct device_node *ciu_node,
 				       struct device_node *parent)
 {
-	int i;
+	int i, ret;
 	int node;
 	struct irq_domain *domain;
 	struct octeon_ciu3_info *ciu3_info;
-	const __be32 *zero_addr;
+	struct resource res;
 	u64 base_addr;
 	union cvmx_ciu3_const consts;
 
@@ -2888,14 +2886,11 @@ static int __init octeon_irq_init_ciu3(struct device_node *ciu_node,
 	if (!ciu3_info)
 		return -ENOMEM;
 
-	zero_addr = of_get_address(ciu_node, 0, NULL, NULL);
-	if (WARN_ON(!zero_addr))
-		return -EINVAL;
-
-	base_addr = of_translate_address(ciu_node, zero_addr);
-	base_addr = (u64)phys_to_virt(base_addr);
+	ret = of_address_to_resource(ciu_node, 0, &res);
+	if (WARN_ON(ret))
+		return ret;
 
-	ciu3_info->ciu3_addr = base_addr;
+	ciu3_info->ciu3_addr = base_addr = (u64)phys_to_virt(res.start);
 	ciu3_info->node = node;
 
 	consts.u64 = cvmx_read_csr(base_addr + CIU3_CONST);
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index a71727f7a608..c5561016f577 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -72,7 +72,7 @@ extern void pci_console_init(const char *arg);
 static unsigned long long max_memory = ULLONG_MAX;
 static unsigned long long reserve_low_mem;
 
-DEFINE_SEMAPHORE(octeon_bootbus_sem);
+DEFINE_SEMAPHORE(octeon_bootbus_sem, 1);
 EXPORT_SYMBOL(octeon_bootbus_sem);
 
 static struct octeon_boot_descriptor *octeon_boot_desc_ptr;
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 89954f5f87fb..4212584e6efa 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -20,6 +20,7 @@
 #include <asm/mmu_context.h>
 #include <asm/time.h>
 #include <asm/setup.h>
+#include <asm/smp.h>
 
 #include <asm/octeon/octeon.h>
 
diff --git a/arch/mips/configs/generic/board-virt.config b/arch/mips/configs/generic/board-virt.config
new file mode 100644
index 000000000000..5594f9e5c3a8
--- /dev/null
+++ b/arch/mips/configs/generic/board-virt.config
@@ -0,0 +1,38 @@
+CONFIG_COMMON_CLK=y
+
+CONFIG_GOLDFISH=y
+CONFIG_GOLDFISH_PIC=y
+
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_HOST_GENERIC=y
+
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SYSCON_REBOOT_MODE=y
+
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GOLDFISH=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_XHCI_HCD=y
+
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
diff --git a/arch/mips/configs/loongson2k_defconfig b/arch/mips/configs/loongson2k_defconfig
index 728bef666f7a..0ab029ecad21 100644
--- a/arch/mips/configs/loongson2k_defconfig
+++ b/arch/mips/configs/loongson2k_defconfig
@@ -154,7 +154,6 @@ CONFIG_TUN=m
 CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_IGB=y
-CONFIG_IXGB=y
 CONFIG_IXGBE=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MELLANOX is not set
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index aca66a5f330d..6f4a52608ea4 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -207,7 +207,6 @@ CONFIG_VIRTIO_NET=m
 CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_IGB=y
-CONFIG_IXGB=y
 CONFIG_IXGBE=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MELLANOX is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index edf9634aa8ee..a5c68e9b0482 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -280,7 +280,6 @@ CONFIG_SUNDANCE=m
 CONFIG_PCMCIA_FMVJ18X=m
 CONFIG_E100=m
 CONFIG_E1000=m
-CONFIG_IXGB=m
 CONFIG_SKGE=m
 CONFIG_SKY2=m
 CONFIG_MYRI10GE=m
@@ -498,7 +497,6 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_OHCI_HCD_PLATFORM=m
 CONFIG_USB_UHCI_HCD=m
-CONFIG_USB_U132_HCD=m
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
 CONFIG_USB_ACM=m
@@ -555,7 +553,6 @@ CONFIG_USB_LCD=m
 CONFIG_USB_CYPRESS_CY7C63=m
 CONFIG_USB_CYTHERM=m
 CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
 CONFIG_USB_APPLEDISPLAY=m
 CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_LD=m
diff --git a/arch/mips/fw/lib/cmdline.c b/arch/mips/fw/lib/cmdline.c
index f24cbb4a39b5..892765b742bb 100644
--- a/arch/mips/fw/lib/cmdline.c
+++ b/arch/mips/fw/lib/cmdline.c
@@ -53,7 +53,7 @@ char *fw_getenv(char *envname)
 {
 	char *result = NULL;
 
-	if (_fw_envp != NULL) {
+	if (_fw_envp != NULL && fw_envp(0) != NULL) {
 		/*
 		 * Return a pointer to the given environment variable.
 		 * YAMON uses "name", "value" pairs, while U-Boot uses
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 1c4438f3f2ab..067a635d3bc8 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -45,12 +45,12 @@
 #endif
 
 #ifdef CONFIG_CPU_HAS_DIEI
-	.macro	local_irq_enable reg=t0
+	.macro	local_irq_enable
 	ei
 	irq_enable_hazard
 	.endm
 
-	.macro	local_irq_disable reg=t0
+	.macro	local_irq_disable
 	di
 	irq_disable_hazard
 	.endm
diff --git a/arch/mips/include/asm/bugs.h b/arch/mips/include/asm/bugs.h
index d72dc6e1cf3c..653f78f3a685 100644
--- a/arch/mips/include/asm/bugs.h
+++ b/arch/mips/include/asm/bugs.h
@@ -24,13 +24,7 @@ extern void check_bugs64_early(void);
 extern void check_bugs32(void);
 extern void check_bugs64(void);
 
-static inline void check_bugs_early(void)
-{
-	if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64))
-		check_bugs64_early();
-}
-
-static inline void check_bugs(void)
+static inline void __init check_bugs(void)
 {
 	unsigned int cpu = smp_processor_id();
 
diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h
index 29187e12b861..3424a7908c0f 100644
--- a/arch/mips/include/asm/cache.h
+++ b/arch/mips/include/asm/cache.h
@@ -16,4 +16,6 @@
 
 #define __read_mostly __section(".data..read_mostly")
 
+extern void cache_noop(void);
+
 #endif /* _ASM_CACHE_H */
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index b3dc9c589442..d8d3f80f9fc0 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -110,7 +110,6 @@ extern void copy_from_user_page(struct vm_area_struct *vma,
 	unsigned long len);
 
 extern void (*flush_icache_all)(void);
-extern void (*local_flush_data_cache_page)(void * addr);
 extern void (*flush_data_cache_page)(unsigned long addr);
 
 /* Run kernel code uncached, useful for cache probing functions. */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index c0983130a44c..51a1737b03d0 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -118,10 +118,27 @@
 #define cpu_has_3k_cache	__isa_lt_and_opt(1, MIPS_CPU_3K_CACHE)
 #endif
 #ifndef cpu_has_4k_cache
-#define cpu_has_4k_cache	__isa_ge_or_opt(1, MIPS_CPU_4K_CACHE)
+#define cpu_has_4k_cache	__opt(MIPS_CPU_4K_CACHE)
 #endif
 #ifndef cpu_has_octeon_cache
-#define cpu_has_octeon_cache	0
+#define cpu_has_octeon_cache						\
+({									\
+	int __res;							\
+									\
+	switch (current_cpu_type()) {					\
+	case CPU_CAVIUM_OCTEON:						\
+	case CPU_CAVIUM_OCTEON_PLUS:					\
+	case CPU_CAVIUM_OCTEON2:					\
+	case CPU_CAVIUM_OCTEON3:					\
+		__res = 1;						\
+		break;							\
+									\
+	default:							\
+		__res = 0;						\
+	}								\
+									\
+	__res;								\
+})
 #endif
 /* Don't override `cpu_has_fpu' to 1 or the "nofpu" option won't work.  */
 #ifndef cpu_has_fpu
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
index beea14761cef..b037718d7e8b 100644
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -70,7 +70,7 @@ enum fixed_addresses {
 #include <asm-generic/fixmap.h>
 
 /*
- * Called from pgtable_init()
+ * Called from pagetable_init()
  */
 extern void fixrange_init(unsigned long start, unsigned long end,
 	pgd_t *pgd_base);
diff --git a/arch/mips/include/asm/ide.h b/arch/mips/include/asm/ide.h
deleted file mode 100644
index bb674c3b0303..000000000000
--- a/arch/mips/include/asm/ide.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * This file contains the MIPS architecture specific IDE code.
- */
-#ifndef __ASM_IDE_H
-#define __ASM_IDE_H
-
-#include <ide.h>
-
-#endif /* __ASM_IDE_H */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index e6d5ccaa309e..cc28d207a061 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -210,7 +210,7 @@ void iounmap(const volatile void __iomem *addr);
 #define ioremap_wc(offset, size)					\
 	ioremap_prot((offset), (size), boot_cpu_data.writecombine)
 
-#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON64)
+#if defined(CONFIG_CPU_CAVIUM_OCTEON)
 #define war_io_reorder_wmb()		wmb()
 #else
 #define war_io_reorder_wmb()		barrier()
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
index 3c401f11655e..4bd8c86ec6c3 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -53,6 +53,7 @@ enum bcm47xx_board {
 	BCM47XX_BOARD_DLINK_DIR130,
 	BCM47XX_BOARD_DLINK_DIR330,
 
+	BCM47XX_BOARD_HUAWEI_B593U_12,
 	BCM47XX_BOARD_HUAWEI_E970,
 
 	BCM47XX_BOARD_LINKSYS_E900V1,
diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h
deleted file mode 100644
index 4ae5fbcb15a5..000000000000
--- a/arch/mips/include/asm/mach-generic/ide.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994-1996  Linus Torvalds & authors
- *
- * Copied from i386; many of the especially older MIPS or ISA-based platforms
- * are basically identical.  Using this file probably implies i8259 PIC
- * support in a system but the very least interrupt numbers 0 - 15 need to
- * be put aside for legacy devices.
- */
-#ifndef __ASM_MACH_GENERIC_IDE_H
-#define __ASM_MACH_GENERIC_IDE_H
-
-#ifdef __KERNEL__
-
-#include <linux/pci.h>
-#include <linux/stddef.h>
-#include <asm/processor.h>
-
-/* MIPS port and memory-mapped I/O string operations.  */
-static inline void __ide_flush_prologue(void)
-{
-#ifdef CONFIG_SMP
-	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
-		preempt_disable();
-#endif
-}
-
-static inline void __ide_flush_epilogue(void)
-{
-#ifdef CONFIG_SMP
-	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
-		preempt_enable();
-#endif
-}
-
-static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
-{
-	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) {
-		unsigned long end = addr + size;
-
-		while (addr < end) {
-			local_flush_data_cache_page((void *)addr);
-			addr += PAGE_SIZE;
-		}
-	}
-}
-
-/*
- * insw() and gang might be called with interrupts disabled, so we can't
- * send IPIs for flushing due to the potencial of deadlocks, see the comment
- * above smp_call_function() in arch/mips/kernel/smp.c.	 We work around the
- * problem by disabling preemption so we know we actually perform the flush
- * on the processor that actually has the lines to be flushed which hopefully
- * is even better for performance anyway.
- */
-static inline void __ide_insw(unsigned long port, void *addr,
-	unsigned int count)
-{
-	__ide_flush_prologue();
-	insw(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
-{
-	__ide_flush_prologue();
-	insl(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_outsw(unsigned long port, const void *addr,
-	unsigned long count)
-{
-	__ide_flush_prologue();
-	outsw(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_outsl(unsigned long port, const void *addr,
-	unsigned long count)
-{
-	__ide_flush_prologue();
-	outsl(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
-{
-	__ide_flush_prologue();
-	readsw(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
-{
-	__ide_flush_prologue();
-	readsl(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
-{
-	__ide_flush_prologue();
-	writesw(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
-{
-	__ide_flush_prologue();
-	writesl(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-	__ide_flush_epilogue();
-}
-
-/* ide_insw calls insw, not __ide_insw.	 Why? */
-#undef insw
-#undef insl
-#undef outsw
-#undef outsl
-#define insw(port, addr, count) __ide_insw(port, addr, count)
-#define insl(port, addr, count) __ide_insl(port, addr, count)
-#define outsw(port, addr, count) __ide_outsw(port, addr, count)
-#define outsl(port, addr, count) __ide_outsl(port, addr, count)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_MACH_GENERIC_IDE_H */
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
index 4790cfa190d6..c2e0acb755cd 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -94,9 +94,6 @@ extern __iomem void *ltq_cgu_membase;
 #define LTQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
 #define LTQ_MPS_CHIPID		((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
 
-/* allow booting xrx200 phys */
-int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
-
 /* request a non-gpio and set the PIO config */
 #define PMU_PPE			 BIT(13)
 extern void ltq_pmu_enable(unsigned int module);
diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
index d51dfad8f543..3e37705ea9cf 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -11,7 +11,8 @@
 #ifndef _MT7620_REGS_H_
 #define _MT7620_REGS_H_
 
-#define MT7620_SYSC_BASE		0x10000000
+#define IOMEM(x)			((void __iomem *)(KSEG1ADDR(x)))
+#define MT7620_SYSC_BASE		IOMEM(0x10000000)
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04
diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h
index 5f213534f0f5..66a999cd1d80 100644
--- a/arch/mips/include/asm/mach-ralink/rt288x.h
+++ b/arch/mips/include/asm/mach-ralink/rt288x.h
@@ -11,7 +11,8 @@
 #ifndef _RT288X_REGS_H_
 #define _RT288X_REGS_H_
 
-#define RT2880_SYSC_BASE		0x00300000
+#define IOMEM(x)			((void __iomem *)(KSEG1ADDR(x)))
+#define RT2880_SYSC_BASE		IOMEM(0x00300000)
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
index 4d8e8c8d83ce..ef58f7bff957 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -43,7 +43,8 @@ static inline int soc_is_rt5350(void)
 	return ralink_soc == RT305X_SOC_RT5350;
 }
 
-#define RT305X_SYSC_BASE		0x10000000
+#define IOMEM(x)			((void __iomem *)(KSEG1ADDR(x)))
+#define RT305X_SYSC_BASE		IOMEM(0x10000000)
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04
diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
index f250de9c055b..ad25d5e8d2dc 100644
--- a/arch/mips/include/asm/mach-ralink/rt3883.h
+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
@@ -10,8 +10,10 @@
 
 #include <linux/bitops.h>
 
+#define IOMEM(x)		((void __iomem *)(KSEG1ADDR(x)))
+
 #define RT3883_SDRAM_BASE	0x00000000
-#define RT3883_SYSC_BASE	0x10000000
+#define RT3883_SYSC_BASE	IOMEM(0x10000000)
 #define RT3883_TIMER_BASE	0x10000100
 #define RT3883_INTC_BASE	0x10000200
 #define RT3883_MEMC_BASE	0x10000300
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index 2362842ee2b5..1c576679aa87 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -280,6 +280,7 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val)
 #define __WRITEABLE	(_PAGE_SILENT_WRITE | _PAGE_WRITE | _PAGE_MODIFIED)
 
 #define _PAGE_CHG_MASK	(_PAGE_ACCESSED | _PAGE_MODIFIED |	\
-			 _PAGE_SOFT_DIRTY | _PFN_MASK | _CACHE_MASK)
+			 _PAGE_SOFT_DIRTY | _PFN_MASK |   \
+			 _CACHE_MASK | _PAGE_SPECIAL)
 
 #endif /* _ASM_PGTABLE_BITS_H */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 791389bf3c12..574fa14ac8b2 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -469,7 +469,8 @@ static inline pgprot_t pgprot_writecombine(pgprot_t _prot)
 }
 
 static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma,
-						unsigned long address)
+						unsigned long address,
+						pte_t *ptep)
 {
 }
 
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 3fde1ff72bd1..ae2cd37a38f0 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -202,11 +202,13 @@ struct octeon_cop2_state {
 #define COP2_INIT						\
 	.cp2			= {0,},
 
+#if defined(CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE) && \
+	CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 struct octeon_cvmseg_state {
 	unsigned long cvmseg[CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE]
 			    [cpu_dcache_line_size() / sizeof(unsigned long)];
 };
-
+#endif
 #else
 #define COP2_INIT
 #endif
@@ -263,8 +265,11 @@ struct thread_struct {
 	unsigned long trap_nr;
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	struct octeon_cop2_state cp2 __attribute__ ((__aligned__(128)));
+#if defined(CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE) && \
+	CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 	struct octeon_cvmseg_state cvmseg __attribute__ ((__aligned__(128)));
 #endif
+#endif
 	struct mips_abi *abi;
 };
 
diff --git a/arch/mips/include/asm/rtlx.h b/arch/mips/include/asm/rtlx.h
index c1020654876e..a72785b4bbf4 100644
--- a/arch/mips/include/asm/rtlx.h
+++ b/arch/mips/include/asm/rtlx.h
@@ -81,7 +81,6 @@ struct rtlx_channel {
 extern struct rtlx_info {
 	unsigned long id;
 	enum rtlx_state state;
-	int ap_int_pending;	/* Status of 0 or 1 for CONFIG_MIPS_CMP only */
 
 	struct rtlx_channel channel[RTLX_CHANNELS];
 } *rtlx;
diff --git a/arch/mips/include/asm/sibyte/board.h b/arch/mips/include/asm/sibyte/board.h
index 20fe2f16c97e..03463faa4244 100644
--- a/arch/mips/include/asm/sibyte/board.h
+++ b/arch/mips/include/asm/sibyte/board.h
@@ -7,7 +7,7 @@
 #define _SIBYTE_BOARD_H
 
 #if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \
-    defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR)
+    defined(CONFIG_SIBYTE_LITTLESUR)
 #include <asm/sibyte/swarm.h>
 #endif
 
@@ -15,10 +15,6 @@
 #include <asm/sibyte/sentosa.h>
 #endif
 
-#ifdef CONFIG_SIBYTE_CARMEL
-#include <asm/sibyte/carmel.h>
-#endif
-
 #ifdef CONFIG_SIBYTE_BIGSUR
 #include <asm/sibyte/bigsur.h>
 #endif
diff --git a/arch/mips/include/asm/sibyte/carmel.h b/arch/mips/include/asm/sibyte/carmel.h
deleted file mode 100644
index c6730d7a6392..000000000000
--- a/arch/mips/include/asm/sibyte/carmel.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2002 Broadcom Corporation
- */
-#ifndef __ASM_SIBYTE_CARMEL_H
-#define __ASM_SIBYTE_CARMEL_H
-
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_int.h>
-
-#define SIBYTE_BOARD_NAME "Carmel"
-
-#define GPIO_PHY_INTERRUPT	2
-#define GPIO_NONMASKABLE_INT	3
-#define GPIO_CF_INSERTED	6
-#define GPIO_MONTEREY_RESET	7
-#define GPIO_QUADUART_INT	8
-#define GPIO_CF_INT		9
-#define GPIO_FPGA_CCLK		10
-#define GPIO_FPGA_DOUT		11
-#define GPIO_FPGA_DIN		12
-#define GPIO_FPGA_PGM		13
-#define GPIO_FPGA_DONE		14
-#define GPIO_FPGA_INIT		15
-
-#define LEDS_CS			2
-#define LEDS_PHYS		0x100C0000
-#define MLEDS_CS		3
-#define MLEDS_PHYS		0x100A0000
-#define UART_CS			4
-#define UART_PHYS		0x100D0000
-#define ARAVALI_CS		5
-#define ARAVALI_PHYS		0x11000000
-#define IDE_CS			6
-#define IDE_PHYS		0x100B0000
-#define ARAVALI2_CS		7
-#define ARAVALI2_PHYS		0x100E0000
-
-#if defined(CONFIG_SIBYTE_CARMEL)
-#define K_GPIO_GB_IDE	9
-#define K_INT_GB_IDE	(K_INT_GPIO_0 + K_GPIO_GB_IDE)
-#endif
-
-
-#endif /* __ASM_SIBYTE_CARMEL_H */
diff --git a/arch/mips/include/asm/sibyte/swarm.h b/arch/mips/include/asm/sibyte/swarm.h
index 947122f487ed..49ea7a645c15 100644
--- a/arch/mips/include/asm/sibyte/swarm.h
+++ b/arch/mips/include/asm/sibyte/swarm.h
@@ -24,11 +24,6 @@
 #define SIBYTE_HAVE_PCMCIA 0
 #define SIBYTE_HAVE_IDE	   0
 #endif
-#ifdef CONFIG_SIBYTE_CRHINE
-#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)"
-#define SIBYTE_HAVE_PCMCIA 0
-#define SIBYTE_HAVE_IDE	   0
-#endif
 
 /* Generic bus chip selects */
 #define LEDS_CS		3
diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h
index 864aea803984..0145bbfb5efb 100644
--- a/arch/mips/include/asm/smp-ops.h
+++ b/arch/mips/include/asm/smp-ops.h
@@ -80,22 +80,6 @@ static inline int register_up_smp_ops(void)
 #endif
 }
 
-static inline int register_cmp_smp_ops(void)
-{
-#ifdef CONFIG_MIPS_CMP
-	extern const struct plat_smp_ops cmp_smp_ops;
-
-	if (!mips_cm_present())
-		return -ENODEV;
-
-	register_smp_ops(&cmp_smp_ops);
-
-	return 0;
-#else
-	return -ENODEV;
-#endif
-}
-
 static inline int register_vsmp_smp_ops(void)
 {
 #ifdef CONFIG_MIPS_MT_SMP
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 9806e79895d9..aab8981bc32c 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -88,7 +88,7 @@ static inline void __cpu_die(unsigned int cpu)
 	mp_ops->cpu_die(cpu);
 }
 
-extern void play_dead(void);
+extern void __noreturn play_dead(void);
 #endif
 
 #ifdef CONFIG_KEXEC
diff --git a/arch/mips/include/asm/vpe.h b/arch/mips/include/asm/vpe.h
index ef7e07829607..61fd4d0aeda4 100644
--- a/arch/mips/include/asm/vpe.h
+++ b/arch/mips/include/asm/vpe.h
@@ -29,12 +29,8 @@
 
 static inline int aprp_cpu_index(void)
 {
-#ifdef CONFIG_MIPS_CMP
-	return setup_max_cpus;
-#else
 	extern int tclimit;
 	return tclimit;
-#endif
 }
 
 enum vpe_state {
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 5d1addac5e28..853a43ee4b44 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -58,16 +58,13 @@ obj-$(CONFIG_CPU_BMIPS)		+= smp-bmips.o bmips_vec.o bmips_5xxx_init.o
 obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
 obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
 obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
-obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
 obj-$(CONFIG_MIPS_CPS)		+= smp-cps.o cps-vec.o
 obj-$(CONFIG_MIPS_CPS_NS16550)	+= cps-vec-ns16550.o
 obj-$(CONFIG_MIPS_SPRAM)	+= spram.o
 
 obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
-obj-$(CONFIG_MIPS_VPE_LOADER_CMP) += vpe-cmp.o
 obj-$(CONFIG_MIPS_VPE_LOADER_MT) += vpe-mt.o
 obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
-obj-$(CONFIG_MIPS_VPE_APSP_API_CMP) += rtlx-cmp.o
 obj-$(CONFIG_MIPS_VPE_APSP_API_MT) += rtlx-mt.o
 
 obj-$(CONFIG_MIPS_MSC)		+= irq-msc01.o
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index c4501897b870..40fd4051bb3d 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -306,7 +306,10 @@ void output_octeon_cop2_state_defines(void)
 	OFFSET(OCTEON_CP2_HSH_IVW,	octeon_cop2_state, cop2_hsh_ivw);
 	OFFSET(OCTEON_CP2_SHA3,		octeon_cop2_state, cop2_sha3);
 	OFFSET(THREAD_CP2,	task_struct, thread.cp2);
+#if defined(CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE) && \
+    CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 	OFFSET(THREAD_CVMSEG,	task_struct, thread.cvmseg.cvmseg);
+#endif
 	BLANK();
 }
 #endif
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index 8ef492da827f..64ecfdac6580 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -116,6 +116,8 @@ not_nmi:
 	li	t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
 	mtc0	t0, CP0_STATUS
 
+	/* We don't know how to do coherence setup on earlier ISA */
+#if MIPS_ISA_REV > 0
 	/* Skip cache & coherence setup if we're already coherent */
 	lw	s7, GCR_CL_COHERENCE_OFS(s1)
 	bnez	s7, 1f
@@ -129,6 +131,7 @@ not_nmi:
 	li	t0, 0xff
 	sw	t0, GCR_CL_COHERENCE_OFS(s1)
 	ehb
+#endif /* MIPS_ISA_REV > 0 */
 
 	/* Set Kseg0 CCA to that in s0 */
 1:	mfc0	t0, CP0_CONFIG
@@ -515,6 +518,7 @@ LEAF(mips_cps_boot_vpes)
 	 nop
 	END(mips_cps_boot_vpes)
 
+#if MIPS_ISA_REV > 0
 LEAF(mips_cps_cache_init)
 	/*
 	 * Clear the bits used to index the caches. Note that the architecture
@@ -588,6 +592,7 @@ dcache_done:
 	jr	ra
 	 nop
 	END(mips_cps_cache_init)
+#endif /* MIPS_ISA_REV > 0 */
 
 #if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
 
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 7ddf07f255f3..6d15a398d389 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1602,6 +1602,8 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
+	/* Octeon has different cache interface */
+	c->options &= ~MIPS_CPU_4K_CACHE;
 	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_CAVIUM_CN38XX:
 	case PRID_IMP_CAVIUM_CN31XX:
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index b4f7d950c846..3f00788b0871 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -181,11 +181,16 @@ static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags);
 
 phys_addr_t __mips_cm_phys_base(void)
 {
-	u32 config3 = read_c0_config3();
 	unsigned long cmgcr;
 
 	/* Check the CMGCRBase register is implemented */
-	if (!(config3 & MIPS_CONF3_CMGCR))
+	if (!(read_c0_config() & MIPS_CONF_M))
+		return 0;
+
+	if (!(read_c0_config2() & MIPS_CONF_M))
+		return 0;
+
+	if (!(read_c0_config3() & MIPS_CONF3_CMGCR))
 		return 0;
 
 	/* Read the address from CMGCRBase */
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index dc023a979803..f88b7919f11f 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -234,7 +234,7 @@ static int __init mips_mt_init(void)
 {
 	struct class *mtc;
 
-	mtc = class_create(THIS_MODULE, "mt");
+	mtc = class_create("mt");
 	if (IS_ERR(mtc))
 		return PTR_ERR(mtc);
 
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
index 896080b445c2..9b7c8ab6f08c 100644
--- a/arch/mips/kernel/octeon_switch.S
+++ b/arch/mips/kernel/octeon_switch.S
@@ -428,7 +428,6 @@ done_restore:
 	jr	ra
 	 nop
 	.space 30 * 4, 0
-octeon_mult_save_end:
 	EXPORT(octeon_mult_save_end)
 	END(octeon_mult_save)
 
@@ -448,7 +447,6 @@ octeon_mult_save_end:
 	sd	k0, PT_MPL+8(sp)      /* PT_MPL+8  has MPL1 */
 	jr	ra
 	 sd	k1, PT_MPL+16(sp)     /* PT_MPL+16 has MPL2 */
-octeon_mult_save2_end:
 	EXPORT(octeon_mult_save2_end)
 	END(octeon_mult_save2)
 
@@ -480,7 +478,6 @@ octeon_mult_save2_end:
 	sd	$10, PT_MPL+(4*8)(sp)	/* store MPL4 */
 	jr	ra
 	 sd	$11, PT_MPL+(5*8)(sp)	/* store MPL5 */
-octeon_mult_save3_end:
 	EXPORT(octeon_mult_save3_end)
 	END(octeon_mult_save3)
 	.set pop
@@ -498,7 +495,6 @@ octeon_mult_save3_end:
 	jr	ra
 	 nop
 	.space 30 * 4, 0
-octeon_mult_restore_end:
 	EXPORT(octeon_mult_restore_end)
 	END(octeon_mult_restore)
 
@@ -517,7 +513,6 @@ octeon_mult_restore_end:
 	mtp1	v0			/* P1 */
 	jr	ra
 	 mtp0	v1			/* P0 */
-octeon_mult_restore2_end:
 	EXPORT(octeon_mult_restore2_end)
 	END(octeon_mult_restore2)
 
@@ -548,7 +543,6 @@ octeon_mult_restore2_end:
 	.word	0x714b000b
 	/* mtp2	$10, $11		   restore P2 and P5 */
 
-octeon_mult_restore3_end:
 	EXPORT(octeon_mult_restore3_end)
 	END(octeon_mult_restore3)
 	.set pop
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 093dbbd6b843..a3225912c862 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -40,7 +40,7 @@
 #include <asm/stacktrace.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	play_dead();
 }
diff --git a/arch/mips/kernel/rtlx-cmp.c b/arch/mips/kernel/rtlx-cmp.c
deleted file mode 100644
index e991cc936c1c..000000000000
--- a/arch/mips/kernel/rtlx-cmp.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/err.h>
-#include <linux/wait.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-
-#include <asm/mips_mt.h>
-#include <asm/vpe.h>
-#include <asm/rtlx.h>
-
-#include <trace/events/ipi.h>
-
-static int major;
-
-static void rtlx_interrupt(void)
-{
-	int i;
-	struct rtlx_info *info;
-	struct rtlx_info **p = vpe_get_shared(aprp_cpu_index());
-
-	if (p == NULL || *p == NULL)
-		return;
-
-	info = *p;
-
-	if (info->ap_int_pending == 1 && smp_processor_id() == 0) {
-		for (i = 0; i < RTLX_CHANNELS; i++) {
-			wake_up(&channel_wqs[i].lx_queue);
-			wake_up(&channel_wqs[i].rt_queue);
-		}
-		info->ap_int_pending = 0;
-	}
-}
-
-void _interrupt_sp(void)
-{
-	smp_send_reschedule(aprp_cpu_index());
-}
-
-int __init rtlx_module_init(void)
-{
-	struct device *dev;
-	int i, err;
-
-	if (!cpu_has_mipsmt) {
-		pr_warn("VPE loader: not a MIPS MT capable processor\n");
-		return -ENODEV;
-	}
-
-	if (num_possible_cpus() - aprp_cpu_index() < 1) {
-		pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n"
-			"Pass maxcpus=<n> argument as kernel argument\n");
-
-		return -ENODEV;
-	}
-
-	major = register_chrdev(0, RTLX_MODULE_NAME, &rtlx_fops);
-	if (major < 0) {
-		pr_err("rtlx_module_init: unable to register device\n");
-		return major;
-	}
-
-	/* initialise the wait queues */
-	for (i = 0; i < RTLX_CHANNELS; i++) {
-		init_waitqueue_head(&channel_wqs[i].rt_queue);
-		init_waitqueue_head(&channel_wqs[i].lx_queue);
-		atomic_set(&channel_wqs[i].in_open, 0);
-		mutex_init(&channel_wqs[i].mutex);
-
-		dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
-				    "%s%d", RTLX_MODULE_NAME, i);
-		if (IS_ERR(dev)) {
-			while (i--)
-				device_destroy(mt_class, MKDEV(major, i));
-
-			err = PTR_ERR(dev);
-			goto out_chrdev;
-		}
-	}
-
-	/* set up notifiers */
-	rtlx_notify.start = rtlx_starting;
-	rtlx_notify.stop = rtlx_stopping;
-	vpe_notify(aprp_cpu_index(), &rtlx_notify);
-
-	if (cpu_has_vint) {
-		aprp_hook = rtlx_interrupt;
-	} else {
-		pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
-		err = -ENODEV;
-		goto out_class;
-	}
-
-	return 0;
-
-out_class:
-	for (i = 0; i < RTLX_CHANNELS; i++)
-		device_destroy(mt_class, MKDEV(major, i));
-out_chrdev:
-	unregister_chrdev(major, RTLX_MODULE_NAME);
-
-	return err;
-}
-
-void __exit rtlx_module_exit(void)
-{
-	int i;
-
-	for (i = 0; i < RTLX_CHANNELS; i++)
-		device_destroy(mt_class, MKDEV(major, i));
-
-	unregister_chrdev(major, RTLX_MODULE_NAME);
-
-	aprp_hook = NULL;
-}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index f1c88f8a1dc5..febdc5564638 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -786,7 +786,8 @@ void __init setup_arch(char **cmdline_p)
 	setup_early_printk();
 #endif
 	cpu_report();
-	check_bugs_early();
+	if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64))
+		check_bugs64_early();
 
 #if defined(CONFIG_VT)
 #if defined(CONFIG_VGA_CONSOLE)
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index f5d7bfa3472a..15466d4cf4a0 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -54,6 +54,8 @@ static void bmips_set_reset_vec(int cpu, u32 val);
 
 #ifdef CONFIG_SMP
 
+#include <asm/smp.h>
+
 /* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */
 unsigned long bmips_smp_boot_sp;
 unsigned long bmips_smp_boot_gp;
@@ -413,6 +415,8 @@ void __ref play_dead(void)
 	"	wait\n"
 	"	j	bmips_secondary_reentry\n"
 	: : : "memory");
+
+	BUG();
 }
 
 #endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
deleted file mode 100644
index 76f5824cdb00..000000000000
--- a/arch/mips/kernel/smp-cmp.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *
- * Copyright (C) 2007 MIPS Technologies, Inc.
- *    Chris Dearman (chris@mips.com)
- */
-
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/sched/task_stack.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/compiler.h>
-
-#include <linux/atomic.h>
-#include <asm/cacheflush.h>
-#include <asm/cpu.h>
-#include <asm/processor.h>
-#include <asm/hardirq.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#include <asm/time.h>
-#include <asm/mipsregs.h>
-#include <asm/mipsmtregs.h>
-#include <asm/mips_mt.h>
-#include <asm/amon.h>
-
-static void cmp_init_secondary(void)
-{
-	struct cpuinfo_mips *c __maybe_unused = &current_cpu_data;
-
-	/* Assume GIC is present */
-	change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
-				 STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
-
-	/* Enable per-cpu interrupts: platform specific */
-
-#ifdef CONFIG_MIPS_MT_SMP
-	if (cpu_has_mipsmt)
-		cpu_set_vpe_id(c, (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
-				  TCBIND_CURVPE);
-#endif
-}
-
-static void cmp_smp_finish(void)
-{
-	pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
-
-	/* CDFIXME: remove this? */
-	write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency / HZ));
-
-#ifdef CONFIG_MIPS_MT_FPAFF
-	/* If we have an FPU, enroll ourselves in the FPU-full mask */
-	if (cpu_has_fpu)
-		cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
-	local_irq_enable();
-}
-
-/*
- * Setup the PC, SP, and GP of a secondary processor and start it running
- * smp_bootstrap is the place to resume from
- * __KSTK_TOS(idle) is apparently the stack pointer
- * (unsigned long)idle->thread_info the gp
- */
-static int cmp_boot_secondary(int cpu, struct task_struct *idle)
-{
-	struct thread_info *gp = task_thread_info(idle);
-	unsigned long sp = __KSTK_TOS(idle);
-	unsigned long pc = (unsigned long)&smp_bootstrap;
-	unsigned long a0 = 0;
-
-	pr_debug("SMPCMP: CPU%d: %s cpu %d\n", smp_processor_id(),
-		__func__, cpu);
-
-#if 0
-	/* Needed? */
-	flush_icache_range((unsigned long)gp,
-			   (unsigned long)(gp + sizeof(struct thread_info)));
-#endif
-
-	amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
-	return 0;
-}
-
-/*
- * Common setup before any secondaries are started
- */
-void __init cmp_smp_setup(void)
-{
-	int i;
-	int ncpu = 0;
-
-	pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
-
-#ifdef CONFIG_MIPS_MT_FPAFF
-	/* If we have an FPU, enroll ourselves in the FPU-full mask */
-	if (cpu_has_fpu)
-		cpumask_set_cpu(0, &mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
-	for (i = 1; i < NR_CPUS; i++) {
-		if (amon_cpu_avail(i)) {
-			set_cpu_possible(i, true);
-			__cpu_number_map[i]	= ++ncpu;
-			__cpu_logical_map[ncpu] = i;
-		}
-	}
-
-	if (cpu_has_mipsmt) {
-		unsigned int nvpe = 1;
-#ifdef CONFIG_MIPS_MT_SMP
-		unsigned int mvpconf0 = read_c0_mvpconf0();
-
-		nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
-#endif
-		smp_num_siblings = nvpe;
-	}
-	pr_info("Detected %i available secondary CPU(s)\n", ncpu);
-}
-
-void __init cmp_prepare_cpus(unsigned int max_cpus)
-{
-	pr_debug("SMPCMP: CPU%d: %s max_cpus=%d\n",
-		 smp_processor_id(), __func__, max_cpus);
-
-#ifdef CONFIG_MIPS_MT
-	/*
-	 * FIXME: some of these options are per-system, some per-core and
-	 * some per-cpu
-	 */
-	mips_mt_set_cpuoptions();
-#endif
-
-}
-
-const struct plat_smp_ops cmp_smp_ops = {
-	.send_ipi_single	= mips_smp_send_ipi_single,
-	.send_ipi_mask		= mips_smp_send_ipi_mask,
-	.init_secondary		= cmp_init_secondary,
-	.smp_finish		= cmp_smp_finish,
-	.boot_secondary		= cmp_boot_secondary,
-	.smp_setup		= cmp_smp_setup,
-	.prepare_cpus		= cmp_prepare_cpus,
-};
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index 4fc288bb85b9..62f677b2306f 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -20,6 +20,7 @@
 #include <asm/mipsregs.h>
 #include <asm/pm-cps.h>
 #include <asm/r4kcache.h>
+#include <asm/smp.h>
 #include <asm/smp-cps.h>
 #include <asm/time.h>
 #include <asm/uasm.h>
@@ -361,6 +362,8 @@ out:
 
 static void cps_init_secondary(void)
 {
+	int core = cpu_core(&current_cpu_data);
+
 	/* Disable MT - we only want to run 1 TC per VPE */
 	if (cpu_has_mipsmt)
 		dmt();
@@ -376,6 +379,9 @@ static void cps_init_secondary(void)
 		BUG_ON(ident != mips_cm_vp_id(smp_processor_id()));
 	}
 
+	if (core > 0 && !read_gcr_cl_coherence())
+		pr_warn("Core %u is not in coherent domain\n", core);
+
 	if (cpu_has_veic)
 		clear_c0_status(ST0_IM);
 	else
diff --git a/arch/mips/kernel/uprobes.c b/arch/mips/kernel/uprobes.c
index 6c063aa188e6..401b148f8917 100644
--- a/arch/mips/kernel/uprobes.c
+++ b/arch/mips/kernel/uprobes.c
@@ -191,6 +191,7 @@ void arch_uprobe_abort_xol(struct arch_uprobe *aup,
 {
 	struct uprobe_task *utask = current->utask;
 
+	current->thread.trap_nr = utask->autask.saved_trap_nr;
 	instruction_pointer_set(regs, utask->vaddr);
 }
 
@@ -207,24 +208,6 @@ unsigned long arch_uretprobe_hijack_return_addr(
 	return ra;
 }
 
-/**
- * set_swbp - store breakpoint at a given address.
- * @auprobe: arch specific probepoint information.
- * @mm: the probed process address space.
- * @vaddr: the virtual address to insert the opcode.
- *
- * For mm @mm, store the breakpoint instruction at @vaddr.
- * Return 0 (success) or a negative errno.
- *
- * This version overrides the weak version in kernel/events/uprobes.c.
- * It is required to handle MIPS16 and microMIPS.
- */
-int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm,
-	unsigned long vaddr)
-{
-	return uprobe_write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN);
-}
-
 void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
 				  void *src, unsigned long len)
 {
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 52cbde60edf5..9ff55cb80a64 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -15,6 +15,8 @@
 #define EMITS_PT_NOTE
 #endif
 
+#define RUNTIME_DISCARD_EXIT
+
 #include <asm-generic/vmlinux.lds.h>
 
 #undef mips
diff --git a/arch/mips/kernel/vpe-cmp.c b/arch/mips/kernel/vpe-cmp.c
deleted file mode 100644
index 92140edb3ce3..000000000000
--- a/arch/mips/kernel/vpe-cmp.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include <asm/vpe.h>
-
-static int major;
-
-void cleanup_tc(struct tc *tc)
-{
-
-}
-
-static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
-			  const char *buf, size_t len)
-{
-	struct vpe *vpe = get_vpe(aprp_cpu_index());
-	struct vpe_notifications *notifier;
-
-	list_for_each_entry(notifier, &vpe->notify, list)
-		notifier->stop(aprp_cpu_index());
-
-	release_progmem(vpe->load_addr);
-	vpe->state = VPE_STATE_UNUSED;
-
-	return len;
-}
-static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill);
-
-static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr,
-			 char *buf)
-{
-	struct vpe *vpe = get_vpe(aprp_cpu_index());
-
-	return sprintf(buf, "%d\n", vpe->ntcs);
-}
-
-static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
-			  const char *buf, size_t len)
-{
-	struct vpe *vpe = get_vpe(aprp_cpu_index());
-	unsigned long new;
-	int ret;
-
-	ret = kstrtoul(buf, 0, &new);
-	if (ret < 0)
-		return ret;
-
-	/* APRP can only reserve one TC in a VPE and no more. */
-	if (new != 1)
-		return -EINVAL;
-
-	vpe->ntcs = new;
-
-	return len;
-}
-static DEVICE_ATTR_RW(ntcs);
-
-static struct attribute *vpe_attrs[] = {
-	&dev_attr_kill.attr,
-	&dev_attr_ntcs.attr,
-	NULL,
-};
-ATTRIBUTE_GROUPS(vpe);
-
-static void vpe_device_release(struct device *cd)
-{
-}
-
-static struct class vpe_class = {
-	.name = "vpe",
-	.owner = THIS_MODULE,
-	.dev_release = vpe_device_release,
-	.dev_groups = vpe_groups,
-};
-
-static struct device vpe_device;
-
-int __init vpe_module_init(void)
-{
-	struct vpe *v = NULL;
-	struct tc *t;
-	int err;
-
-	if (!cpu_has_mipsmt) {
-		pr_warn("VPE loader: not a MIPS MT capable processor\n");
-		return -ENODEV;
-	}
-
-	if (num_possible_cpus() - aprp_cpu_index() < 1) {
-		pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n"
-			"Pass maxcpus=<n> argument as kernel argument\n");
-		return -ENODEV;
-	}
-
-	major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops);
-	if (major < 0) {
-		pr_warn("VPE loader: unable to register character device\n");
-		return major;
-	}
-
-	err = class_register(&vpe_class);
-	if (err) {
-		pr_err("vpe_class registration failed\n");
-		goto out_chrdev;
-	}
-
-	device_initialize(&vpe_device);
-	vpe_device.class	= &vpe_class;
-	vpe_device.parent	= NULL;
-	dev_set_name(&vpe_device, "vpe_sp");
-	vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR);
-	err = device_add(&vpe_device);
-	if (err) {
-		pr_err("Adding vpe_device failed\n");
-		goto out_class;
-	}
-
-	t = alloc_tc(aprp_cpu_index());
-	if (!t) {
-		pr_warn("VPE: unable to allocate TC\n");
-		err = -ENOMEM;
-		goto out_dev;
-	}
-
-	/* VPE */
-	v = alloc_vpe(aprp_cpu_index());
-	if (v == NULL) {
-		pr_warn("VPE: unable to allocate VPE\n");
-		kfree(t);
-		err = -ENOMEM;
-		goto out_dev;
-	}
-
-	v->ntcs = 1;
-
-	/* add the tc to the list of this vpe's tc's. */
-	list_add(&t->tc, &v->tc);
-
-	/* TC */
-	t->pvpe = v;	/* set the parent vpe */
-
-	return 0;
-
-out_dev:
-	device_del(&vpe_device);
-
-out_class:
-	put_device(&vpe_device);
-	class_unregister(&vpe_class);
-
-out_chrdev:
-	unregister_chrdev(major, VPE_MODULE_NAME);
-
-	return err;
-}
-
-void __exit vpe_module_exit(void)
-{
-	struct vpe *v, *n;
-
-	device_unregister(&vpe_device);
-	class_unregister(&vpe_class);
-	unregister_chrdev(major, VPE_MODULE_NAME);
-
-	/* No locking needed here */
-	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list)
-		if (v->state != VPE_STATE_UNUSED)
-			release_vpe(v);
-}
diff --git a/arch/mips/kernel/vpe-mt.c b/arch/mips/kernel/vpe-mt.c
index 223d6274f2e5..667bc75f6420 100644
--- a/arch/mips/kernel/vpe-mt.c
+++ b/arch/mips/kernel/vpe-mt.c
@@ -316,7 +316,6 @@ static void vpe_device_release(struct device *cd)
 
 static struct class vpe_class = {
 	.name = "vpe",
-	.owner = THIS_MODULE,
 	.dev_release = vpe_device_release,
 	.dev_groups = vpe_groups,
 };
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 13294972707b..e9a0cfd02ae2 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -199,18 +199,17 @@ static void layout_sections(struct module *mod, const Elf_Ehdr *hdr,
 	for (m = 0; m < ARRAY_SIZE(masks); ++m) {
 		for (i = 0; i < hdr->e_shnum; ++i) {
 			Elf_Shdr *s = &sechdrs[i];
+			struct module_memory *mod_mem;
+
+			mod_mem = &mod->mem[MOD_TEXT];
 
 			if ((s->sh_flags & masks[m][0]) != masks[m][0]
 			    || (s->sh_flags & masks[m][1])
 			    || s->sh_entsize != ~0UL)
 				continue;
 			s->sh_entsize =
-				get_offset((unsigned long *)&mod->core_layout.size, s);
+				get_offset((unsigned long *)&mod_mem->size, s);
 		}
-
-		if (m == 0)
-			mod->core_layout.text_size = mod->core_layout.size;
-
 	}
 }
 
@@ -641,7 +640,7 @@ static int vpe_elfload(struct vpe *v)
 		layout_sections(&mod, hdr, sechdrs, secstrings);
 	}
 
-	v->load_addr = alloc_progmem(mod.core_layout.size);
+	v->load_addr = alloc_progmem(mod.mem[MOD_TEXT].size);
 	if (!v->load_addr)
 		return -ENOMEM;
 
@@ -795,7 +794,7 @@ static int vpe_open(struct inode *inode, struct file *filp)
 
 static int vpe_release(struct inode *inode, struct file *filp)
 {
-#if defined(CONFIG_MIPS_VPE_LOADER_MT) || defined(CONFIG_MIPS_VPE_LOADER_CMP)
+#ifdef CONFIG_MIPS_VPE_LOADER_MT
 	struct vpe *v;
 	Elf_Ehdr *hdr;
 	int ret = 0;
diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig
index 29e51649203b..a8cdba75f98d 100644
--- a/arch/mips/kvm/Kconfig
+++ b/arch/mips/kvm/Kconfig
@@ -26,7 +26,6 @@ config KVM
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
 	select KVM_MMIO
 	select MMU_NOTIFIER
-	select SRCU
 	select INTERVAL_TREE
 	select KVM_GENERIC_HARDWARE_ENABLING
 	help
diff --git a/arch/mips/loongson2ef/Kconfig b/arch/mips/loongson2ef/Kconfig
index 96dc6eba4310..f93eb6f42238 100644
--- a/arch/mips/loongson2ef/Kconfig
+++ b/arch/mips/loongson2ef/Kconfig
@@ -7,6 +7,7 @@ choice
 config LEMOTE_FULOONG2E
 	bool "Lemote Fuloong(2e) mini-PC"
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select CEVT_R4K
@@ -36,6 +37,7 @@ config LEMOTE_FULOONG2E
 config LEMOTE_MACH2F
 	bool "Lemote Loongson 2F family machines"
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select BOARD_SCACHE
@@ -46,6 +48,7 @@ config LEMOTE_MACH2F
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select GPIOLIB
 	select FORCE_PCI
 	select I8259
 	select IRQ_MIPS_CPU
diff --git a/arch/mips/loongson2ef/Platform b/arch/mips/loongson2ef/Platform
index c6f7a4b95997..d446b705fba4 100644
--- a/arch/mips/loongson2ef/Platform
+++ b/arch/mips/loongson2ef/Platform
@@ -2,41 +2,6 @@
 # Loongson Processors' Support
 #
 
-cflags-$(CONFIG_CPU_LOONGSON2EF)	+= -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e
-cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f
-#
-# Some versions of binutils, not currently mainline as of 2019/02/04, support
-# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
-# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
-# description).
-#
-# We disable this in order to prevent the assembler meddling with the
-# instruction that labels refer to, ie. if we label an ll instruction:
-#
-# 1: ll v0, 0(a0)
-#
-# ...then with the assembler fix applied the label may actually point at a sync
-# instruction inserted by the assembler, and if we were using the label in an
-# exception table the table would no longer contain the address of the ll
-# instruction.
-#
-# Avoid this by explicitly disabling that assembler behaviour. If upstream
-# binutils does not merge support for the flag then we can revisit & remove
-# this later - for now it ensures vendor toolchains don't cause problems.
-#
-cflags-$(CONFIG_CPU_LOONGSON2EF)	+= $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
-
-# Enable the workarounds for Loongson2f
-ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
-cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
-cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
-endif
-
-# Some -march= flags enable MMI instructions, and GCC complains about that
-# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
-cflags-y += $(call cc-option,-mno-loongson-mmi)
-
 #
 # Loongson Machines' Support
 #
diff --git a/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c b/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c
index 5ad38f86ee62..d60dd9992377 100644
--- a/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c
+++ b/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c
@@ -213,7 +213,7 @@ void pci_isa_write_reg(int reg, u32 value)
 			lo |= 0x00000063;
 			_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
 		}
-
+		break;
 	default:
 		/* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
 		break;
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index 473404cae1c4..49c9889e3d56 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -1,20 +1,4 @@
 #
-# Loongson Processors' Support
-#
-
-
-cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
-
-ifdef CONFIG_CPU_LOONGSON64
-cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
-cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
-endif
-
-# Some -march= flags enable MMI instructions, and GCC complains about that
-# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
-cflags-y += $(call cc-option,-mno-loongson-mmi)
-
-#
 # Loongson Machines' Support
 #
 
diff --git a/arch/mips/loongson64/setup.c b/arch/mips/loongson64/setup.c
index 3cd11c2b308b..257038e18779 100644
--- a/arch/mips/loongson64/setup.c
+++ b/arch/mips/loongson64/setup.c
@@ -6,7 +6,6 @@
 #include <linux/export.h>
 #include <linux/init.h>
 
-#include <asm/wbflush.h>
 #include <asm/bootinfo.h>
 #include <linux/libfdt.h>
 #include <linux/of_fdt.h>
@@ -17,20 +16,6 @@
 
 void *loongson_fdt_blob;
 
-static void wbflush_loongson(void)
-{
-	asm(".set\tpush\n\t"
-	    ".set\tnoreorder\n\t"
-	    ".set mips3\n\t"
-	    "sync\n\t"
-	    "nop\n\t"
-	    ".set\tpop\n\t"
-	    ".set mips0\n\t");
-}
-
-void (*__wbflush)(void) = wbflush_loongson;
-EXPORT_SYMBOL(__wbflush);
-
 void __init plat_mem_setup(void)
 {
 	if (loongson_fdt_blob)
diff --git a/arch/mips/loongson64/smp.c b/arch/mips/loongson64/smp.c
index 660e1de4412a..b0e8bb9fa036 100644
--- a/arch/mips/loongson64/smp.c
+++ b/arch/mips/loongson64/smp.c
@@ -14,6 +14,7 @@
 #include <linux/cpufreq.h>
 #include <linux/kexec.h>
 #include <asm/processor.h>
+#include <asm/smp.h>
 #include <asm/time.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
@@ -27,30 +28,13 @@ DEFINE_PER_CPU(int, cpu_state);
 
 #define LS_IPI_IRQ (MIPS_CPU_IRQ_BASE + 6)
 
-static void *ipi_set0_regs[16];
-static void *ipi_clear0_regs[16];
-static void *ipi_status0_regs[16];
-static void *ipi_en0_regs[16];
-static void *ipi_mailbox_buf[16];
+static void __iomem *ipi_set0_regs[16];
+static void __iomem *ipi_clear0_regs[16];
+static void __iomem *ipi_status0_regs[16];
+static void __iomem *ipi_en0_regs[16];
+static void __iomem *ipi_mailbox_buf[16];
 static uint32_t core0_c0count[NR_CPUS];
 
-/* read a 32bit value from ipi register */
-#define loongson3_ipi_read32(addr) readl(addr)
-/* read a 64bit value from ipi register */
-#define loongson3_ipi_read64(addr) readq(addr)
-/* write a 32bit value to ipi register */
-#define loongson3_ipi_write32(action, addr)	\
-	do {					\
-		writel(action, addr);		\
-		__wbflush();			\
-	} while (0)
-/* write a 64bit value to ipi register */
-#define loongson3_ipi_write64(action, addr)	\
-	do {					\
-		writeq(action, addr);		\
-		__wbflush();			\
-	} while (0)
-
 static u32 (*ipi_read_clear)(int cpu);
 static void (*ipi_write_action)(int cpu, u32 action);
 static void (*ipi_write_enable)(int cpu);
@@ -136,26 +120,28 @@ static u32 legacy_ipi_read_clear(int cpu)
 	u32 action;
 
 	/* Load the ipi register to figure out what we're supposed to do */
-	action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]);
+	action = readl_relaxed(ipi_status0_regs[cpu_logical_map(cpu)]);
 	/* Clear the ipi register to clear the interrupt */
-	loongson3_ipi_write32(action, ipi_clear0_regs[cpu_logical_map(cpu)]);
+	writel_relaxed(action, ipi_clear0_regs[cpu_logical_map(cpu)]);
+	nudge_writes();
 
 	return action;
 }
 
 static void legacy_ipi_write_action(int cpu, u32 action)
 {
-	loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu]);
+	writel_relaxed((u32)action, ipi_set0_regs[cpu]);
+	nudge_writes();
 }
 
 static void legacy_ipi_write_enable(int cpu)
 {
-	loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(cpu)]);
+	writel_relaxed(0xffffffff, ipi_en0_regs[cpu_logical_map(cpu)]);
 }
 
 static void legacy_ipi_clear_buf(int cpu)
 {
-	loongson3_ipi_write64(0, ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
+	writeq_relaxed(0, ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
 }
 
 static void legacy_ipi_write_buf(int cpu, struct task_struct *idle)
@@ -171,14 +157,15 @@ static void legacy_ipi_write_buf(int cpu, struct task_struct *idle)
 	pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n",
 			cpu, startargs[0], startargs[1], startargs[2]);
 
-	loongson3_ipi_write64(startargs[3],
+	writeq_relaxed(startargs[3],
 			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x18);
-	loongson3_ipi_write64(startargs[2],
+	writeq_relaxed(startargs[2],
 			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x10);
-	loongson3_ipi_write64(startargs[1],
+	writeq_relaxed(startargs[1],
 			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x8);
-	loongson3_ipi_write64(startargs[0],
+	writeq_relaxed(startargs[0],
 			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
+	nudge_writes();
 }
 
 static void csr_ipi_probe(void)
@@ -418,7 +405,7 @@ static irqreturn_t loongson3_ipi_interrupt(int irq, void *dev_id)
 		c0count = c0count ? c0count : 1;
 		for (i = 1; i < nr_cpu_ids; i++)
 			core0_c0count[i] = c0count;
-		__wbflush(); /* Let others see the result ASAP */
+		nudge_writes(); /* Let others see the result ASAP */
 	}
 
 	return IRQ_HANDLED;
@@ -822,6 +809,7 @@ out:
 	state_addr = &per_cpu(cpu_state, cpu);
 	mb();
 	play_dead_at_ckseg1(state_addr);
+	BUG();
 }
 
 static int loongson3_disable_clock(unsigned int cpu)
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index c7ed589de882..b7393b61cfa7 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -83,8 +83,13 @@ static void octeon_flush_icache_all_cores(struct vm_area_struct *vma)
 	else
 		mask = *cpu_online_mask;
 	cpumask_clear_cpu(cpu, &mask);
+#ifdef CONFIG_CAVIUM_OCTEON_SOC
 	for_each_cpu(cpu, &mask)
 		octeon_send_ipi_single(cpu, SMP_ICACHE_FLUSH);
+#else
+	smp_call_function_many(&mask, (smp_call_func_t)octeon_local_flush_icache,
+			       NULL, 1);
+#endif
 
 	preempt_enable();
 #endif
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index df6755ca1892..5869df848fab 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -261,10 +261,6 @@ static void r3k_flush_cache_page(struct vm_area_struct *vma,
 		r3k_flush_icache_range(kaddr, kaddr + PAGE_SIZE);
 }
 
-static void local_r3k_flush_data_cache_page(void *addr)
-{
-}
-
 static void r3k_flush_data_cache_page(unsigned long addr)
 {
 }
@@ -302,7 +298,6 @@ void r3k_cache_init(void)
 
 	__flush_kernel_vmap_range = r3k_flush_kernel_vmap_range;
 
-	local_flush_data_cache_page = local_r3k_flush_data_cache_page;
 	flush_data_cache_page = r3k_flush_data_cache_page;
 
 	_dma_cache_wback_inv = r3k_dma_cache_wback_inv;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index a549fa98c2f4..4b6554b48923 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -110,20 +110,6 @@ static unsigned long dcache_size __read_mostly;
 static unsigned long vcache_size __read_mostly;
 static unsigned long scache_size __read_mostly;
 
-/*
- * Dummy cache handling routines for machines without boardcaches
- */
-static void cache_noop(void) {}
-
-static struct bcache_ops no_sc_ops = {
-	.bc_enable = (void *)cache_noop,
-	.bc_disable = (void *)cache_noop,
-	.bc_wback_inv = (void *)cache_noop,
-	.bc_inv = (void *)cache_noop
-};
-
-struct bcache_ops *bcops = &no_sc_ops;
-
 #define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x00002010)
 #define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x00002020)
 
@@ -201,24 +187,6 @@ static void r4k_blast_dcache_user_page_setup(void)
 
 #endif
 
-static void (* r4k_blast_dcache_page_indexed)(unsigned long addr);
-
-static void r4k_blast_dcache_page_indexed_setup(void)
-{
-	unsigned long dc_lsize = cpu_dcache_line_size();
-
-	if (dc_lsize == 0)
-		r4k_blast_dcache_page_indexed = (void *)cache_noop;
-	else if (dc_lsize == 16)
-		r4k_blast_dcache_page_indexed = blast_dcache16_page_indexed;
-	else if (dc_lsize == 32)
-		r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed;
-	else if (dc_lsize == 64)
-		r4k_blast_dcache_page_indexed = blast_dcache64_page_indexed;
-	else if (dc_lsize == 128)
-		r4k_blast_dcache_page_indexed = blast_dcache128_page_indexed;
-}
-
 void (* r4k_blast_dcache)(void);
 EXPORT_SYMBOL(r4k_blast_dcache);
 
@@ -280,39 +248,6 @@ static inline void tx49_blast_icache32(void)
 				     addr | ws, 32);
 }
 
-static inline void blast_icache32_r4600_v1_page_indexed(unsigned long page)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	blast_icache32_page_indexed(page);
-	local_irq_restore(flags);
-}
-
-static inline void tx49_blast_icache32_page_indexed(unsigned long page)
-{
-	unsigned long indexmask = current_cpu_data.icache.waysize - 1;
-	unsigned long start = INDEX_BASE + (page & indexmask);
-	unsigned long end = start + PAGE_SIZE;
-	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
-	unsigned long ws_end = current_cpu_data.icache.ways <<
-			       current_cpu_data.icache.waybit;
-	unsigned long ws, addr;
-
-	CACHE32_UNROLL32_ALIGN2;
-	/* I'm in even chunk.  blast odd chunks */
-	for (ws = 0; ws < ws_end; ws += ws_inc)
-		for (addr = start + 0x400; addr < end; addr += 0x400 * 2)
-			cache_unroll(32, kernel_cache, Index_Invalidate_I,
-				     addr | ws, 32);
-	CACHE32_UNROLL32_ALIGN;
-	/* I'm in odd chunk.  blast even chunks */
-	for (ws = 0; ws < ws_end; ws += ws_inc)
-		for (addr = start; addr < end; addr += 0x400 * 2)
-			cache_unroll(32, kernel_cache, Index_Invalidate_I,
-				     addr | ws, 32);
-}
-
 static void (* r4k_blast_icache_page)(unsigned long addr);
 
 static void r4k_blast_icache_page_setup(void)
@@ -355,34 +290,6 @@ static void r4k_blast_icache_user_page_setup(void)
 
 #endif
 
-static void (* r4k_blast_icache_page_indexed)(unsigned long addr);
-
-static void r4k_blast_icache_page_indexed_setup(void)
-{
-	unsigned long ic_lsize = cpu_icache_line_size();
-
-	if (ic_lsize == 0)
-		r4k_blast_icache_page_indexed = (void *)cache_noop;
-	else if (ic_lsize == 16)
-		r4k_blast_icache_page_indexed = blast_icache16_page_indexed;
-	else if (ic_lsize == 32) {
-		if (IS_ENABLED(CONFIG_WAR_R4600_V1_INDEX_ICACHEOP) &&
-		    cpu_is_r4600_v1_x())
-			r4k_blast_icache_page_indexed =
-				blast_icache32_r4600_v1_page_indexed;
-		else if (IS_ENABLED(CONFIG_WAR_TX49XX_ICACHE_INDEX_INV))
-			r4k_blast_icache_page_indexed =
-				tx49_blast_icache32_page_indexed;
-		else if (current_cpu_type() == CPU_LOONGSON2EF)
-			r4k_blast_icache_page_indexed =
-				loongson2_blast_icache32_page_indexed;
-		else
-			r4k_blast_icache_page_indexed =
-				blast_icache32_page_indexed;
-	} else if (ic_lsize == 64)
-		r4k_blast_icache_page_indexed = blast_icache64_page_indexed;
-}
-
 void (* r4k_blast_icache)(void);
 EXPORT_SYMBOL(r4k_blast_icache);
 
@@ -428,24 +335,6 @@ static void r4k_blast_scache_page_setup(void)
 		r4k_blast_scache_page = blast_scache128_page;
 }
 
-static void (* r4k_blast_scache_page_indexed)(unsigned long addr);
-
-static void r4k_blast_scache_page_indexed_setup(void)
-{
-	unsigned long sc_lsize = cpu_scache_line_size();
-
-	if (scache_size == 0)
-		r4k_blast_scache_page_indexed = (void *)cache_noop;
-	else if (sc_lsize == 16)
-		r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
-	else if (sc_lsize == 32)
-		r4k_blast_scache_page_indexed = blast_scache32_page_indexed;
-	else if (sc_lsize == 64)
-		r4k_blast_scache_page_indexed = blast_scache64_page_indexed;
-	else if (sc_lsize == 128)
-		r4k_blast_scache_page_indexed = blast_scache128_page_indexed;
-}
-
 static void (* r4k_blast_scache)(void);
 
 static void r4k_blast_scache_setup(void)
@@ -1821,13 +1710,10 @@ void r4k_cache_init(void)
 	setup_scache();
 
 	r4k_blast_dcache_page_setup();
-	r4k_blast_dcache_page_indexed_setup();
 	r4k_blast_dcache_setup();
 	r4k_blast_icache_page_setup();
-	r4k_blast_icache_page_indexed_setup();
 	r4k_blast_icache_setup();
 	r4k_blast_scache_page_setup();
-	r4k_blast_scache_page_indexed_setup();
 	r4k_blast_scache_setup();
 	r4k_blast_scache_node_setup();
 #ifdef CONFIG_EVA
@@ -1859,7 +1745,6 @@ void r4k_cache_init(void)
 	__flush_kernel_vmap_range = r4k_flush_kernel_vmap_range;
 
 	flush_icache_all	= r4k_flush_icache_all;
-	local_flush_data_cache_page	= local_r4k_flush_data_cache_page;
 	flush_data_cache_page	= r4k_flush_data_cache_page;
 	flush_icache_range	= r4k_flush_icache_range;
 	local_flush_icache_range	= local_r4k_flush_icache_range;
@@ -1867,15 +1752,9 @@ void r4k_cache_init(void)
 	__local_flush_icache_user_range	= local_r4k_flush_icache_user_range;
 
 #ifdef CONFIG_DMA_NONCOHERENT
-	if (dma_default_coherent) {
-		_dma_cache_wback_inv	= (void *)cache_noop;
-		_dma_cache_wback	= (void *)cache_noop;
-		_dma_cache_inv		= (void *)cache_noop;
-	} else {
-		_dma_cache_wback_inv	= r4k_dma_cache_wback_inv;
-		_dma_cache_wback	= r4k_dma_cache_wback_inv;
-		_dma_cache_inv		= r4k_dma_cache_inv;
-	}
+	_dma_cache_wback_inv	= r4k_dma_cache_wback_inv;
+	_dma_cache_wback	= r4k_dma_cache_wback_inv;
+	_dma_cache_inv		= r4k_dma_cache_inv;
 #endif /* CONFIG_DMA_NONCOHERENT */
 
 	build_clear_page();
@@ -1908,7 +1787,6 @@ void r4k_cache_init(void)
 		/* I$ fills from D$ just by emptying the write buffers */
 		flush_cache_page = (void *)b5k_instruction_hazard;
 		flush_cache_range = (void *)b5k_instruction_hazard;
-		local_flush_data_cache_page = (void *)b5k_instruction_hazard;
 		flush_data_cache_page = (void *)b5k_instruction_hazard;
 		flush_icache_range = (void *)b5k_instruction_hazard;
 		local_flush_icache_range = (void *)b5k_instruction_hazard;
@@ -1928,7 +1806,6 @@ void r4k_cache_init(void)
 		flush_cache_range	= (void *)cache_noop;
 		flush_icache_all	= (void *)cache_noop;
 		flush_data_cache_page	= (void *)cache_noop;
-		local_flush_data_cache_page	= (void *)cache_noop;
 		break;
 	}
 }
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 11b3e7ddafd5..d21cf8c6cf6c 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -17,6 +17,7 @@
 #include <linux/highmem.h>
 #include <linux/pagemap.h>
 
+#include <asm/bcache.h>
 #include <asm/cacheflush.h>
 #include <asm/processor.h>
 #include <asm/cpu.h>
@@ -48,14 +49,30 @@ void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
 EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range);
 
 /* MIPS specific cache operations */
-void (*local_flush_data_cache_page)(void * addr);
 void (*flush_data_cache_page)(unsigned long addr);
 void (*flush_icache_all)(void);
 
-EXPORT_SYMBOL_GPL(local_flush_data_cache_page);
 EXPORT_SYMBOL(flush_data_cache_page);
 EXPORT_SYMBOL(flush_icache_all);
 
+/*
+ * Dummy cache handling routine
+ */
+
+void cache_noop(void) {}
+
+#ifdef CONFIG_BOARD_SCACHE
+
+static struct bcache_ops no_sc_ops = {
+	.bc_enable = (void *)cache_noop,
+	.bc_disable = (void *)cache_noop,
+	.bc_wback_inv = (void *)cache_noop,
+	.bc_inv = (void *)cache_noop
+};
+
+struct bcache_ops *bcops = &no_sc_ops;
+#endif
+
 #ifdef CONFIG_DMA_NONCOHERENT
 
 /* DMA cache operations. */
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index 13bbd12bfa65..bb2c706e11b0 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -14,6 +14,4 @@ obj-y				+= malta-platform.o
 obj-y				+= malta-setup.o
 obj-y				+= malta-time.o
 
-obj-$(CONFIG_MIPS_CMP)		+= malta-amon.o
-
 CFLAGS_malta-dtshim.o = -I$(src)/../../../scripts/dtc/libfdt
diff --git a/arch/mips/mti-malta/malta-amon.c b/arch/mips/mti-malta/malta-amon.c
deleted file mode 100644
index 84ac523b0ce0..000000000000
--- a/arch/mips/mti-malta/malta-amon.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- *
- * Arbitrary Monitor Interface
- */
-#include <linux/kernel.h>
-#include <linux/smp.h>
-
-#include <asm/addrspace.h>
-#include <asm/mipsmtregs.h>
-#include <asm/mips-boards/launch.h>
-#include <asm/vpe.h>
-
-int amon_cpu_avail(int cpu)
-{
-	struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-
-	if (cpu < 0 || cpu >= NCPULAUNCH) {
-		pr_debug("avail: cpu%d is out of range\n", cpu);
-		return 0;
-	}
-
-	launch += cpu;
-	if (!(launch->flags & LAUNCH_FREADY)) {
-		pr_debug("avail: cpu%d is not ready\n", cpu);
-		return 0;
-	}
-	if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) {
-		pr_debug("avail: too late.. cpu%d is already gone\n", cpu);
-		return 0;
-	}
-
-	return 1;
-}
-
-int amon_cpu_start(int cpu,
-		    unsigned long pc, unsigned long sp,
-		    unsigned long gp, unsigned long a0)
-{
-	volatile struct cpulaunch *launch =
-		(struct cpulaunch  *)CKSEG0ADDR(CPULAUNCH);
-
-	if (!amon_cpu_avail(cpu))
-		return -1;
-	if (cpu == smp_processor_id()) {
-		pr_debug("launch: I am cpu%d!\n", cpu);
-		return -1;
-	}
-	launch += cpu;
-
-	pr_debug("launch: starting cpu%d\n", cpu);
-
-	launch->pc = pc;
-	launch->gp = gp;
-	launch->sp = sp;
-	launch->a0 = a0;
-
-	smp_wmb();		/* Target must see parameters before go */
-	launch->flags |= LAUNCH_FGO;
-	smp_wmb();		/* Target must see go before we poll  */
-
-	while ((launch->flags & LAUNCH_FGONE) == 0)
-		;
-	smp_rmb();	/* Target will be updating flags soon */
-	pr_debug("launch: cpu%d gone!\n", cpu);
-
-	return 0;
-}
-
-#ifdef CONFIG_MIPS_VPE_LOADER_CMP
-int vpe_run(struct vpe *v)
-{
-	struct vpe_notifications *n;
-
-	if (amon_cpu_start(aprp_cpu_index(), v->__start, 0, 0, 0) < 0)
-		return -1;
-
-	list_for_each_entry(n, &v->notify, list)
-		n->start(VPE_MODULE_MINOR);
-
-	return 0;
-}
-#endif
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index b03cac5fdc02..000d6d50520a 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -289,8 +289,6 @@ mips_pci_controller:
 
 	if (!register_cps_smp_ops())
 		return;
-	if (!register_cmp_smp_ops())
-		return;
 	if (!register_vsmp_smp_ops())
 		return;
 	register_up_smp_ops();
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index 4ffbcc58c6f6..6961a23aefe9 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -43,7 +43,6 @@
 static struct plat_serial8250_port uart8250_data[] = {
 	SMC_PORT(0x3F8, 4),
 	SMC_PORT(0x2F8, 3),
-#ifndef CONFIG_MIPS_CMP
 	{
 		.mapbase	= 0x1f000900,	/* The CBUS UART */
 		.irq		= MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
@@ -53,7 +52,6 @@ static struct plat_serial8250_port uart8250_data[] = {
 		.flags		= CBUS_UART_FLAGS,
 		.regshift	= 3,
 	},
-#endif
 	{ },
 };
 
diff --git a/arch/mips/net/bpf_jit_comp.c b/arch/mips/net/bpf_jit_comp.c
index b17130d510d4..a40d926b6513 100644
--- a/arch/mips/net/bpf_jit_comp.c
+++ b/arch/mips/net/bpf_jit_comp.c
@@ -218,9 +218,13 @@ bool valid_alu_i(u8 op, s32 imm)
 		/* All legal eBPF values are valid */
 		return true;
 	case BPF_ADD:
+		if (IS_ENABLED(CONFIG_CPU_DADDI_WORKAROUNDS))
+			return false;
 		/* imm must be 16 bits */
 		return imm >= -0x8000 && imm <= 0x7fff;
 	case BPF_SUB:
+		if (IS_ENABLED(CONFIG_CPU_DADDI_WORKAROUNDS))
+			return false;
 		/* -imm must be 16 bits */
 		return imm >= -0x7fff && imm <= 0x8000;
 	case BPF_AND:
diff --git a/arch/mips/net/bpf_jit_comp64.c b/arch/mips/net/bpf_jit_comp64.c
index 0e7c1bdcf914..fa7e9aa37f49 100644
--- a/arch/mips/net/bpf_jit_comp64.c
+++ b/arch/mips/net/bpf_jit_comp64.c
@@ -228,6 +228,9 @@ static void emit_alu_r64(struct jit_context *ctx, u8 dst, u8 src, u8 op)
 		} else {
 			emit(ctx, dmultu, dst, src);
 			emit(ctx, mflo, dst);
+			/* Ensure multiplication is completed */
+			if (IS_ENABLED(CONFIG_CPU_R4000_WORKAROUNDS))
+				emit(ctx, mfhi, MIPS_R_ZERO);
 		}
 		break;
 	/* dst = dst / src */
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
index dc6dc2741272..b0ea023c47c0 100644
--- a/arch/mips/pci/ops-bcm63xx.c
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -413,18 +413,18 @@ struct pci_ops bcm63xx_cb_ops = {
 static void bcm63xx_fixup(struct pci_dev *dev)
 {
 	static int io_window = -1;
-	int i, found, new_io_window;
+	int found, new_io_window;
+	struct resource *r;
 	u32 val;
 
 	/* look for any io resource */
 	found = 0;
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
+	pci_dev_for_each_resource(dev, r) {
+		if (resource_type(r) == IORESOURCE_IO) {
 			found = 1;
 			break;
 		}
 	}
-
 	if (!found)
 		return;
 
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index d967e4c0cf24..79e29bf42a24 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -118,7 +118,7 @@ static int ltq_pci_startup(struct platform_device *pdev)
 
 	/* and enable the clocks */
 	clk_enable(clk_pci);
-	if (of_find_property(node, "lantiq,external-clock", NULL))
+	if (of_property_read_bool(node, "lantiq,external-clock"))
 		clk_enable(clk_external);
 	else
 		clk_disable(clk_external);
diff --git a/arch/mips/pci/pci-legacy.c b/arch/mips/pci/pci-legacy.c
index 468722c8a5c6..ec2567f8efd8 100644
--- a/arch/mips/pci/pci-legacy.c
+++ b/arch/mips/pci/pci-legacy.c
@@ -249,12 +249,11 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	old_cmd = cmd;
-	for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
+	pci_dev_for_each_resource(dev, r, idx) {
 		/* Only set up the requested stuff */
 		if (!(mask & (1<<idx)))
 			continue;
 
-		r = &dev->resource[idx];
 		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
 			continue;
 		if ((idx == PCI_ROM_RESOURCE) &&
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index d59888aaed81..4ac68a534e4f 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -419,7 +419,7 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 
 	/* find the interrupt controller child node */
 	for_each_child_of_node(np, child) {
-		if (of_get_property(child, "interrupt-controller", NULL)) {
+		if (of_property_read_bool(child, "interrupt-controller")) {
 			rpc->intc_of_node = child;
 			break;
 		}
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 83e61e147b90..08c012a2591f 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -29,18 +29,22 @@ choice
 		select MIPS_AUTO_PFN_OFFSET
 		select MIPS_L1_CACHE_SHIFT_4
 		select HAVE_PCI
+		select SOC_BUS
 
 	config SOC_RT305X
 		bool "RT305x"
+		select SOC_BUS
 
 	config SOC_RT3883
 		bool "RT3883"
 		select HAVE_PCI
+		select SOC_BUS
 
 	config SOC_MT7620
 		bool "MT7620/8"
 		select CPU_MIPSR2_IRQ_VI
 		select HAVE_PCI
+		select SOC_BUS
 
 	config SOC_MT7621
 		bool "MT7621"
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index ae1fa0391c88..4435f50b8d24 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -11,6 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/bug.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/mipsregs.h>
 #include <asm/mach-ralink/ralink_regs.h>
@@ -49,6 +51,8 @@
 /* does the board have sdram or ddram */
 static int dram_type;
 
+static struct ralink_soc_info *soc_info_ptr;
+
 static __init u32
 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
 {
@@ -324,35 +328,76 @@ mt7628_dram_init(struct ralink_soc_info *soc_info)
 	}
 }
 
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init mt7620_get_soc_name0(void)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
-	unsigned char *name = NULL;
-	u32 n0;
-	u32 n1;
-	u32 rev;
-	u32 cfg0;
-	u32 pmu0;
-	u32 pmu1;
-	u32 bga;
+	return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init mt7620_get_soc_name1(void)
+{
+	return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init mt7620_soc_valid(void)
+{
+	if (mt7620_get_soc_name0() == MT7620_CHIP_NAME0 &&
+	    mt7620_get_soc_name1() == MT7620_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static bool __init mt7628_soc_valid(void)
+{
+	if (mt7620_get_soc_name0() == MT7620_CHIP_NAME0 &&
+	    mt7620_get_soc_name1() == MT7628_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static unsigned int __init mt7620_get_rev(void)
+{
+	return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_REV);
+}
+
+static unsigned int __init mt7620_get_bga(void)
+{
+	return (mt7620_get_rev() >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
+}
+
+static unsigned int __init mt7620_get_efuse(void)
+{
+	return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_EFUSE_CFG);
+}
+
+static unsigned int __init mt7620_get_soc_ver(void)
+{
+	return (mt7620_get_rev() >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK;
+}
 
-	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
-	bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
+static unsigned int __init mt7620_get_soc_eco(void)
+{
+	return (mt7620_get_rev() & CHIP_REV_ECO_MASK);
+}
+
+static const char __init *mt7620_get_soc_name(struct ralink_soc_info *soc_info)
+{
+	if (mt7620_soc_valid()) {
+		u32 bga = mt7620_get_bga();
 
-	if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
 		if (bga) {
 			ralink_soc = MT762X_SOC_MT7620A;
-			name = "MT7620A";
 			soc_info->compatible = "ralink,mt7620a-soc";
+			return "MT7620A";
 		} else {
 			ralink_soc = MT762X_SOC_MT7620N;
-			name = "MT7620N";
 			soc_info->compatible = "ralink,mt7620n-soc";
+			return "MT7620N";
 		}
-	} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
-		u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+	} else if (mt7628_soc_valid()) {
+		u32 efuse = mt7620_get_efuse();
+		unsigned char *name = NULL;
 
 		if (efuse & EFUSE_MT7688) {
 			ralink_soc = MT762X_SOC_MT7688;
@@ -362,17 +407,63 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 			name = "MT7628AN";
 		}
 		soc_info->compatible = "ralink,mt7628an-soc";
+		return name;
 	} else {
-		panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+		panic("mt762x: unknown SoC, n0:%08x n1:%08x\n",
+		      mt7620_get_soc_name0(), mt7620_get_soc_name1());
 	}
+}
+
+static const char __init *mt7620_get_soc_id_name(void)
+{
+	if (ralink_soc == MT762X_SOC_MT7620A)
+		return "mt7620a";
+	else if (ralink_soc == MT762X_SOC_MT7620N)
+		return "mt7620n";
+	else if (ralink_soc == MT762X_SOC_MT7688)
+		return "mt7688";
+	else if (ralink_soc == MT762X_SOC_MT7628AN)
+		return "mt7628n";
+	else
+		return "invalid";
+}
+
+static int __init mt7620_soc_dev_init(void)
+{
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->soc_id = mt7620_get_soc_id_name();
+
+	soc_dev_attr->data = soc_info_ptr;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
+	}
+
+	return 0;
+}
+device_initcall(mt7620_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	const char *name = mt7620_get_soc_name(soc_info);
+	u32 cfg0;
+	u32 pmu0;
+	u32 pmu1;
 
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"MediaTek %s ver:%u eco:%u",
-		name,
-		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
-		(rev & CHIP_REV_ECO_MASK));
+		name, mt7620_get_soc_ver(), mt7620_get_soc_eco());
 
-	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
+	cfg0 = __raw_readl(MT7620_SYSC_BASE + SYSC_REG_SYSTEM_CONFIG0);
 	if (is_mt76x8()) {
 		dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
 	} else {
@@ -388,11 +479,13 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 	else
 		mt7620_dram_init(soc_info);
 
-	pmu0 = __raw_readl(sysc + PMU0_CFG);
-	pmu1 = __raw_readl(sysc + PMU1_CFG);
+	pmu0 = __raw_readl(MT7620_SYSC_BASE + PMU0_CFG);
+	pmu1 = __raw_readl(MT7620_SYSC_BASE + PMU1_CFG);
 
 	pr_info("Analog PMU set to %s control\n",
 		(pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
 	pr_info("Digital PMU set to %s control\n",
 		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+
+	soc_info_ptr = soc_info;
 }
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index bbf5811afbf2..c3fbab50b95c 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -217,8 +217,6 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 
 	if (!register_cps_smp_ops())
 		return;
-	if (!register_cmp_smp_ops())
-		return;
 	if (!register_vsmp_smp_ops())
 		return;
 }
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
index 493335db2fe1..456ba0b2599e 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -10,6 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/mipsregs.h>
 #include <asm/mach-ralink/ralink_regs.h>
@@ -17,6 +19,8 @@
 
 #include "common.h"
 
+static struct ralink_soc_info *soc_info_ptr;
+
 void __init ralink_clk_init(void)
 {
 	unsigned long cpu_rate, wmac_rate = 40000000;
@@ -57,34 +61,90 @@ void __init ralink_of_remap(void)
 		panic("Failed to remap core resources");
 }
 
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init rt2880_get_soc_name0(void)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
-	const char *name;
-	u32 n0;
-	u32 n1;
-	u32 id;
+	return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
 
-	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+static unsigned int __init rt2880_get_soc_name1(void)
+{
+	return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
 
-	if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
-		soc_info->compatible = "ralink,r2880-soc";
-		name = "RT2880";
-	} else {
-		panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+static bool __init rt2880_soc_valid(void)
+{
+	if (rt2880_get_soc_name0() == RT2880_CHIP_NAME0 &&
+	    rt2880_get_soc_name1() == RT2880_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static const char __init *rt2880_get_soc_name(void)
+{
+	if (rt2880_soc_valid())
+		return "RT2880";
+	else
+		return "invalid";
+}
+
+static unsigned int __init rt2880_get_soc_id(void)
+{
+	return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_ID);
+}
+
+static unsigned int __init rt2880_get_soc_ver(void)
+{
+	return (rt2880_get_soc_id() >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK;
+}
+
+static unsigned int __init rt2880_get_soc_rev(void)
+{
+	return (rt2880_get_soc_id() & CHIP_ID_REV_MASK);
+}
+
+static int __init rt2880_soc_dev_init(void)
+{
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->soc_id = rt2880_get_soc_name();
+
+	soc_dev_attr->data = soc_info_ptr;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
 	}
 
+	return 0;
+}
+device_initcall(rt2880_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	if (rt2880_soc_valid())
+		soc_info->compatible = "ralink,r2880-soc";
+	else
+		panic("rt288x: unknown SoC, n0:%08x n1:%08x",
+		      rt2880_get_soc_name0(), rt2880_get_soc_name1());
+
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"Ralink %s id:%u rev:%u",
-		name,
-		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
-		(id & CHIP_ID_REV_MASK));
+		rt2880_get_soc_name(),
+		rt2880_get_soc_ver(),
+		rt2880_get_soc_rev());
 
 	soc_info->mem_base = RT2880_SDRAM_BASE;
 	soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
 	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
 
 	ralink_soc = RT2880_SOC;
+	soc_info_ptr = soc_info;
 }
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index 8b095a9dcb15..d8dcc5cc66cc 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -11,6 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/bug.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/io.h>
 #include <asm/mipsregs.h>
@@ -19,13 +21,14 @@
 
 #include "common.h"
 
+static struct ralink_soc_info *soc_info_ptr;
+
 static unsigned long rt5350_get_mem_size(void)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
 	unsigned long ret;
 	u32 t;
 
-	t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
+	t = __raw_readl(RT305X_SYSC_BASE + SYSC_REG_SYSTEM_CONFIG);
 	t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
 		RT5350_SYSCFG0_DRAM_SIZE_MASK;
 
@@ -140,53 +143,149 @@ void __init ralink_of_remap(void)
 		panic("Failed to remap core resources");
 }
 
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init rt305x_get_soc_name0(void)
+{
+	return __raw_readl(RT305X_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init rt305x_get_soc_name1(void)
+{
+	return __raw_readl(RT305X_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init rt3052_soc_valid(void)
+{
+	if (rt305x_get_soc_name0() == RT3052_CHIP_NAME0 &&
+	    rt305x_get_soc_name1() == RT3052_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static bool __init rt3350_soc_valid(void)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
-	unsigned char *name;
-	u32 n0;
-	u32 n1;
-	u32 id;
+	if (rt305x_get_soc_name0() == RT3350_CHIP_NAME0 &&
+	    rt305x_get_soc_name1() == RT3350_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static bool __init rt3352_soc_valid(void)
+{
+	if (rt305x_get_soc_name0() == RT3352_CHIP_NAME0 &&
+	    rt305x_get_soc_name1() == RT3352_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
 
-	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+static bool __init rt5350_soc_valid(void)
+{
+	if (rt305x_get_soc_name0() == RT5350_CHIP_NAME0 &&
+	    rt305x_get_soc_name1() == RT5350_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
 
-	if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) {
+static const char __init *rt305x_get_soc_name(struct ralink_soc_info *soc_info)
+{
+	if (rt3052_soc_valid()) {
 		unsigned long icache_sets;
 
 		icache_sets = (read_c0_config1() >> 22) & 7;
 		if (icache_sets == 1) {
 			ralink_soc = RT305X_SOC_RT3050;
-			name = "RT3050";
 			soc_info->compatible = "ralink,rt3050-soc";
+			return "RT3050";
 		} else {
 			ralink_soc = RT305X_SOC_RT3052;
-			name = "RT3052";
 			soc_info->compatible = "ralink,rt3052-soc";
+			return "RT3052";
 		}
-	} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
+	} else if (rt3350_soc_valid()) {
 		ralink_soc = RT305X_SOC_RT3350;
-		name = "RT3350";
 		soc_info->compatible = "ralink,rt3350-soc";
-	} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
+		return "RT3350";
+	} else if (rt3352_soc_valid()) {
 		ralink_soc = RT305X_SOC_RT3352;
-		name = "RT3352";
 		soc_info->compatible = "ralink,rt3352-soc";
-	} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
+		return "RT3352";
+	} else if (rt5350_soc_valid()) {
 		ralink_soc = RT305X_SOC_RT5350;
-		name = "RT5350";
 		soc_info->compatible = "ralink,rt5350-soc";
+		return "RT5350";
 	} else {
-		panic("rt305x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+		panic("rt305x: unknown SoC, n0:%08x n1:%08x",
+		      rt305x_get_soc_name0(), rt305x_get_soc_name1());
 	}
+}
 
-	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+static unsigned int __init rt305x_get_soc_id(void)
+{
+	return __raw_readl(RT305X_SYSC_BASE + SYSC_REG_CHIP_ID);
+}
+
+static unsigned int __init rt305x_get_soc_ver(void)
+{
+	return (rt305x_get_soc_id() >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK;
+}
+
+static unsigned int __init rt305x_get_soc_rev(void)
+{
+	return (rt305x_get_soc_id() & CHIP_ID_REV_MASK);
+}
+
+static const char __init *rt305x_get_soc_id_name(void)
+{
+	if (soc_is_rt3050())
+		return "rt3050";
+	else if (soc_is_rt3052())
+		return "rt3052";
+	else if (soc_is_rt3350())
+		return "rt3350";
+	else if (soc_is_rt3352())
+		return "rt3352";
+	else if (soc_is_rt5350())
+		return "rt5350";
+	else
+		return "invalid";
+}
+
+static int __init rt305x_soc_dev_init(void)
+{
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->soc_id = rt305x_get_soc_id_name();
+
+	soc_dev_attr->data = soc_info_ptr;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
+	}
+
+	return 0;
+}
+device_initcall(rt305x_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	const char *name = rt305x_get_soc_name(soc_info);
 
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"Ralink %s id:%u rev:%u",
 		name,
-		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
-		(id & CHIP_ID_REV_MASK));
+		rt305x_get_soc_ver(),
+		rt305x_get_soc_rev());
 
 	soc_info->mem_base = RT305X_SDRAM_BASE;
 	if (soc_is_rt5350()) {
@@ -198,4 +297,6 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 		soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
 		soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
 	}
+
+	soc_info_ptr = soc_info;
 }
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
index d9875f146d66..cca887af378f 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -10,6 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/mipsregs.h>
 #include <asm/mach-ralink/ralink_regs.h>
@@ -17,6 +19,8 @@
 
 #include "common.h"
 
+static struct ralink_soc_info *soc_info_ptr;
+
 void __init ralink_clk_init(void)
 {
 	unsigned long cpu_rate, sys_rate;
@@ -70,34 +74,90 @@ void __init ralink_of_remap(void)
 		panic("Failed to remap core resources");
 }
 
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init rt3883_get_soc_name0(void)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
-	const char *name;
-	u32 n0;
-	u32 n1;
-	u32 id;
+	return __raw_readl(RT3883_SYSC_BASE + RT3883_SYSC_REG_CHIPID0_3);
+}
 
-	n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
-	n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
-	id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
+static unsigned int __init rt3883_get_soc_name1(void)
+{
+	return __raw_readl(RT3883_SYSC_BASE + RT3883_SYSC_REG_CHIPID4_7);
+}
 
-	if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
-		soc_info->compatible = "ralink,rt3883-soc";
-		name = "RT3883";
-	} else {
-		panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
+static bool __init rt3883_soc_valid(void)
+{
+	if (rt3883_get_soc_name0() == RT3883_CHIP_NAME0 &&
+	    rt3883_get_soc_name1() == RT3883_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static const char __init *rt3883_get_soc_name(void)
+{
+	if (rt3883_soc_valid())
+		return "RT3883";
+	else
+		return "invalid";
+}
+
+static unsigned int __init rt3883_get_soc_id(void)
+{
+	return __raw_readl(RT3883_SYSC_BASE + RT3883_SYSC_REG_REVID);
+}
+
+static unsigned int __init rt3883_get_soc_ver(void)
+{
+	return (rt3883_get_soc_id() >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK;
+}
+
+static unsigned int __init rt3883_get_soc_rev(void)
+{
+	return (rt3883_get_soc_id() & RT3883_REVID_ECO_ID_MASK);
+}
+
+static int __init rt3883_soc_dev_init(void)
+{
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->soc_id = rt3883_get_soc_name();
+
+	soc_dev_attr->data = soc_info_ptr;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
 	}
 
+	return 0;
+}
+device_initcall(rt3883_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	if (rt3883_soc_valid())
+		soc_info->compatible = "ralink,rt3883-soc";
+	else
+		panic("rt3883: unknown SoC, n0:%08x n1:%08x",
+		      rt3883_get_soc_name0(), rt3883_get_soc_name1());
+
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"Ralink %s ver:%u eco:%u",
-		name,
-		(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
-		(id & RT3883_REVID_ECO_ID_MASK));
+		rt3883_get_soc_name(),
+		rt3883_get_soc_ver(),
+		rt3883_get_soc_rev());
 
 	soc_info->mem_base = RT3883_SDRAM_BASE;
 	soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
 	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
 
 	ralink_soc = RT3883_SOC;
+	soc_info_ptr = soc_info;
 }
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index 470d46183677..5fb92fe84149 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -10,15 +10,6 @@ config SIBYTE_SB1250
 	select SIBYTE_SB1xxx_SOC
 	select SYS_SUPPORTS_SMP
 
-config SIBYTE_BCM1120
-	bool
-	select CEVT_SB1250
-	select CSRC_SB1250
-	select IRQ_MIPS_CPU
-	select SIBYTE_BCM112X
-	select SIBYTE_HAS_ZBUS_PROFILING
-	select SIBYTE_SB1xxx_SOC
-
 config SIBYTE_BCM1125
 	bool
 	select CEVT_SB1250
@@ -29,17 +20,6 @@ config SIBYTE_BCM1125
 	select SIBYTE_HAS_ZBUS_PROFILING
 	select SIBYTE_SB1xxx_SOC
 
-config SIBYTE_BCM1125H
-	bool
-	select CEVT_SB1250
-	select CSRC_SB1250
-	select HAVE_PCI
-	select IRQ_MIPS_CPU
-	select SIBYTE_BCM112X
-	select SIBYTE_ENABLE_LDT_IF_PCI
-	select SIBYTE_HAS_ZBUS_PROFILING
-	select SIBYTE_SB1xxx_SOC
-
 config SIBYTE_BCM112X
 	bool
 	select CEVT_SB1250
@@ -58,16 +38,6 @@ config SIBYTE_BCM1x80
 	select SIBYTE_SB1xxx_SOC
 	select SYS_SUPPORTS_SMP
 
-config SIBYTE_BCM1x55
-	bool
-	select CEVT_BCM1480
-	select CSRC_BCM1480
-	select HAVE_PCI
-	select IRQ_MIPS_CPU
-	select SIBYTE_SB1xxx_SOC
-	select SIBYTE_HAS_ZBUS_PROFILING
-	select SYS_SUPPORTS_SMP
-
 config SIBYTE_SB1xxx_SOC
 	bool
 	select IRQ_MIPS_CPU
@@ -143,8 +113,7 @@ config SIBYTE_CFE_CONSOLE
 config SIBYTE_BUS_WATCHER
 	bool "Support for Bus Watcher statistics"
 	depends on SIBYTE_SB1xxx_SOC && \
-		(SIBYTE_BCM112X || SIBYTE_SB1250 || \
-		 SIBYTE_BCM1x55 || SIBYTE_BCM1x80)
+		(SIBYTE_BCM112X || SIBYTE_SB1250 || SIBYTE_BCM1x80)
 	help
 	  Handle and keep statistics on the bus error interrupts (COR_ECC,
 	  BAD_ECC, IO_BUS).
diff --git a/arch/mips/sibyte/Makefile b/arch/mips/sibyte/Makefile
index d015c4d79c3e..47078353fe8a 100644
--- a/arch/mips/sibyte/Makefile
+++ b/arch/mips/sibyte/Makefile
@@ -6,21 +6,15 @@ obj-$(CONFIG_SIBYTE_BCM112X)	+= sb1250/
 obj-$(CONFIG_SIBYTE_BCM112X)	+= common/
 obj-$(CONFIG_SIBYTE_SB1250)	+= sb1250/
 obj-$(CONFIG_SIBYTE_SB1250)	+= common/
-obj-$(CONFIG_SIBYTE_BCM1x55)	+= bcm1480/
-obj-$(CONFIG_SIBYTE_BCM1x55)	+= common/
 obj-$(CONFIG_SIBYTE_BCM1x80)	+= bcm1480/
 obj-$(CONFIG_SIBYTE_BCM1x80)	+= common/
 
 #
-# Sibyte BCM91120x (Carmel) board
-# Sibyte BCM91120C (CRhine) board
 # Sibyte BCM91125C (CRhone) board
 # Sibyte BCM91125E (Rhone) board
 # Sibyte SWARM board
 # Sibyte BCM91x80 (BigSur) board
 #
-obj-$(CONFIG_SIBYTE_CARMEL)	+= swarm/
-obj-$(CONFIG_SIBYTE_CRHINE)	+= swarm/
 obj-$(CONFIG_SIBYTE_CRHONE)	+= swarm/
 obj-$(CONFIG_SIBYTE_RHONE)	+= swarm/
 obj-$(CONFIG_SIBYTE_SENTOSA)	+= swarm/
diff --git a/arch/mips/sibyte/Platform b/arch/mips/sibyte/Platform
index 65b2225b76b2..937108e41f13 100644
--- a/arch/mips/sibyte/Platform
+++ b/arch/mips/sibyte/Platform
@@ -13,25 +13,17 @@ cflags-$(CONFIG_SIBYTE_SB1250)	+=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
-cflags-$(CONFIG_SIBYTE_BCM1x55) +=					\
-		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
-		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
-
 cflags-$(CONFIG_SIBYTE_BCM1x80) +=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
 #
-# Sibyte BCM91120x (Carmel) board
-# Sibyte BCM91120C (CRhine) board
 # Sibyte BCM91125C (CRhone) board
 # Sibyte BCM91125E (Rhone) board
 # Sibyte BCM91250A (SWARM) board
 # Sibyte BCM91250C2 (LittleSur) board
 # Sibyte BCM91x80 (BigSur) board
 #
-load-$(CONFIG_SIBYTE_CARMEL)	:= 0xffffffff80100000
-load-$(CONFIG_SIBYTE_CRHINE)	:= 0xffffffff80100000
 load-$(CONFIG_SIBYTE_CRHONE)	:= 0xffffffff80100000
 load-$(CONFIG_SIBYTE_RHONE)	:= 0xffffffff80100000
 load-$(CONFIG_SIBYTE_SENTOSA)	:= 0xffffffff80100000
diff --git a/arch/mips/sibyte/common/bus_watcher.c b/arch/mips/sibyte/common/bus_watcher.c
index d43291473f76..a296d2c51841 100644
--- a/arch/mips/sibyte/common/bus_watcher.c
+++ b/arch/mips/sibyte/common/bus_watcher.c
@@ -24,7 +24,7 @@
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_int.h>
 #include <asm/sibyte/sb1250_scd.h>
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 #include <asm/sibyte/bcm1480_regs.h>
 #endif
 
@@ -71,7 +71,7 @@ void check_bus_watcher(void)
 #if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
 	/* Use non-destructive register */
 	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG));
-#elif defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#elif defined(CONFIG_SIBYTE_BCM1x80)
 	/* Use non-destructive register */
 	/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
 	status = csr_in32(IOADDR(A_BCM1480_BUS_ERR_STATUS_DEBUG));
diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c
index 1a504294d85f..2cb90dbbe843 100644
--- a/arch/mips/sibyte/common/cfe.c
+++ b/arch/mips/sibyte/common/cfe.c
@@ -35,11 +35,6 @@
 #endif
 #endif
 
-#define SIBYTE_MAX_MEM_REGIONS 8
-phys_addr_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS];
-phys_addr_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS];
-unsigned int board_mem_region_count;
-
 int cfe_cons_handle;
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -141,16 +136,6 @@ static __init void prom_meminit(void)
 					size -= 512;
 				memblock_add(addr, size);
 			}
-			board_mem_region_addrs[board_mem_region_count] = addr;
-			board_mem_region_sizes[board_mem_region_count] = size;
-			board_mem_region_count++;
-			if (board_mem_region_count ==
-			    SIBYTE_MAX_MEM_REGIONS) {
-				/*
-				 * Too many regions.  Need to configure more
-				 */
-				while(1);
-			}
 		}
 	}
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -310,7 +295,7 @@ void __init prom_init(void)
 #if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
 	register_smp_ops(&sb_smp_ops);
 #endif
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 	register_smp_ops(&bcm1480_smp_ops);
 #endif
 }
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index bc47681e825a..408db45efdc8 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -23,7 +23,7 @@
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
 
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 #include <asm/sibyte/bcm1480_regs.h>
 #include <asm/sibyte/bcm1480_scd.h>
 #include <asm/sibyte/bcm1480_int.h>
@@ -35,7 +35,7 @@
 #error invalid SiByte UART configuration
 #endif
 
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 #undef K_INT_TRACE_FREEZE
 #define K_INT_TRACE_FREEZE K_BCM1480_INT_TRACE_FREEZE
 #undef K_INT_PERF_CNT
@@ -157,7 +157,7 @@ static void arm_tb(void)
 	 * a previous interrupt request.  This means that bus profiling
 	 * requires ALL of the SCD perf counters.
 	 */
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 	__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
 						/* keep counters 0,2,3,4,5,6,7 as is */
 		     V_SPC_CFG_SRC1(1),		/* counter 1 counts cycles */
@@ -290,7 +290,7 @@ static int sbprof_zbprof_start(struct file *filp)
 	 *  pass them through.	I am exploiting my knowledge that
 	 *  cp0_status masks out IP[5]. krw
 	 */
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 	__raw_writeq(K_BCM1480_INT_MAP_I3,
 		     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) +
 			    ((K_BCM1480_INT_PERF_CNT & 0x3f) << 3)));
@@ -343,7 +343,7 @@ static int sbprof_zbprof_start(struct file *filp)
 	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
 
 	/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 	__raw_writeq(1ULL << (K_BCM1480_INT_PERF_CNT & 0x3f),
 		     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_TRACE_L)));
 #else
@@ -550,7 +550,7 @@ static int __init sbprof_tb_init(void)
 		return -EIO;
 	}
 
-	tbc = class_create(THIS_MODULE, "sb_tracebuffer");
+	tbc = class_create("sb_tracebuffer");
 	if (IS_ERR(tbc)) {
 		err = PTR_ERR(tbc);
 		goto out_chrdev;
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 72a31eeeebba..76683993cdd3 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -24,7 +24,7 @@
 #include <asm/time.h>
 #include <asm/traps.h>
 #include <asm/sibyte/sb1250.h>
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 #include <asm/sibyte/bcm1480_regs.h>
 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 #include <asm/sibyte/sb1250_regs.h>
@@ -34,7 +34,7 @@
 #include <asm/sibyte/sb1250_genbus.h>
 #include <asm/sibyte/board.h>
 
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 extern void bcm1480_setup(void);
 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 extern void sb1250_setup(void);
@@ -114,7 +114,7 @@ int update_persistent_clock64(struct timespec64 now)
 
 void __init plat_mem_setup(void)
 {
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 	bcm1480_setup();
 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 	sb1250_setup();
@@ -146,12 +146,6 @@ void __init plat_mem_setup(void)
 
 #ifdef LEDS_PHYS
 
-#ifdef CONFIG_SIBYTE_CARMEL
-/* XXXKW need to detect Monterey/LittleSur/etc */
-#undef LEDS_PHYS
-#define LEDS_PHYS MLEDS_PHYS
-#endif
-
 void setleds(char *str)
 {
 	void *reg;
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
index 18af9474ed0e..eb56581f6d73 100644
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -4,9 +4,7 @@
 # Sanitizer runtimes are unavailable and cannot be linked here.
  KCSAN_SANITIZE			:= n
 
-# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before
-# the inclusion of generic Makefile.
-ARCH_REL_TYPE_ABS := R_MIPS_JUMP_SLOT|R_MIPS_GLOB_DAT
+# Include the generic Makefile to check the built vdso.
 include $(srctree)/lib/vdso/Makefile
 
 obj-vdso-y := elf.o vgettimeofday.o sigreturn.o
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index a582f72104f3..e5936417d3cd 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -45,19 +45,17 @@ menu "Kernel features"
 source "kernel/Kconfig.hz"
 
 config ARCH_FORCE_MAX_ORDER
-	int "Maximum zone order"
-	range 9 20
-	default "11"
+	int "Order of maximal physically contiguous allocations"
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
-
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
+
+	  Don't change if unsure.
 
 endmenu
 
diff --git a/arch/nios2/include/asm/thread_info.h b/arch/nios2/include/asm/thread_info.h
index bcc0e9915ebd..5abac9893b32 100644
--- a/arch/nios2/include/asm/thread_info.h
+++ b/arch/nios2/include/asm/thread_info.h
@@ -96,9 +96,6 @@ static inline struct thread_info *current_thread_info(void)
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		0x0000FFFE
 
-/* work to do on any return to u-space */
-# define _TIF_ALLWORK_MASK	0x0000FFFF
-
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_NIOS2_THREAD_INFO_H */
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index a98940e64243..466a25525364 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -47,6 +47,7 @@ config PARISC
 	select MODULES_USE_ELF_RELA
 	select CLONE_BACKWARDS
 	select TTY # Needed for pdc_cons.c
+	select HAS_IOPORT if PCI || EISA
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HASH
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index 7df140545b22..f6e38c4d3904 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -27,9 +27,9 @@
  *      We are not doing SEGREL32 handling correctly. According to the ABI, we
  *      should do a value offset, like this:
  *			if (in_init(me, (void *)val))
- *				val -= (uint32_t)me->init_layout.base;
+ *				val -= (uint32_t)me->mem[MOD_INIT_TEXT].base;
  *			else
- *				val -= (uint32_t)me->core_layout.base;
+ *				val -= (uint32_t)me->mem[MOD_TEXT].base;
  *	However, SEGREL32 is used only for PARISC unwind entries, and we want
  *	those entries to have an absolute address, and not just an offset.
  *
@@ -76,25 +76,6 @@
  * allows us to allocate up to 4095 GOT entries. */
 #define MAX_GOTS	4095
 
-/* three functions to determine where in the module core
- * or init pieces the location is */
-static inline int in_init(struct module *me, void *loc)
-{
-	return (loc >= me->init_layout.base &&
-		loc <= (me->init_layout.base + me->init_layout.size));
-}
-
-static inline int in_core(struct module *me, void *loc)
-{
-	return (loc >= me->core_layout.base &&
-		loc <= (me->core_layout.base + me->core_layout.size));
-}
-
-static inline int in_local(struct module *me, void *loc)
-{
-	return in_init(me, loc) || in_core(me, loc);
-}
-
 #ifndef CONFIG_64BIT
 struct got_entry {
 	Elf32_Addr addr;
@@ -302,6 +283,7 @@ int module_frob_arch_sections(CONST Elf_Ehdr *hdr,
 {
 	unsigned long gots = 0, fdescs = 0, len;
 	unsigned int i;
+	struct module_memory *mod_mem;
 
 	len = hdr->e_shnum * sizeof(me->arch.section[0]);
 	me->arch.section = kzalloc(len, GFP_KERNEL);
@@ -346,14 +328,15 @@ int module_frob_arch_sections(CONST Elf_Ehdr *hdr,
 		me->arch.section[s].stub_entries += count;
 	}
 
+	mod_mem = &me->mem[MOD_TEXT];
 	/* align things a bit */
-	me->core_layout.size = ALIGN(me->core_layout.size, 16);
-	me->arch.got_offset = me->core_layout.size;
-	me->core_layout.size += gots * sizeof(struct got_entry);
+	mod_mem->size = ALIGN(mod_mem->size, 16);
+	me->arch.got_offset = mod_mem->size;
+	mod_mem->size += gots * sizeof(struct got_entry);
 
-	me->core_layout.size = ALIGN(me->core_layout.size, 16);
-	me->arch.fdesc_offset = me->core_layout.size;
-	me->core_layout.size += fdescs * sizeof(Elf_Fdesc);
+	mod_mem->size = ALIGN(mod_mem->size, 16);
+	me->arch.fdesc_offset = mod_mem->size;
+	mod_mem->size += fdescs * sizeof(Elf_Fdesc);
 
 	me->arch.got_max = gots;
 	me->arch.fdesc_max = fdescs;
@@ -371,7 +354,7 @@ static Elf64_Word get_got(struct module *me, unsigned long value, long addend)
 
 	BUG_ON(value == 0);
 
-	got = me->core_layout.base + me->arch.got_offset;
+	got = me->mem[MOD_TEXT].base + me->arch.got_offset;
 	for (i = 0; got[i].addr; i++)
 		if (got[i].addr == value)
 			goto out;
@@ -389,7 +372,7 @@ static Elf64_Word get_got(struct module *me, unsigned long value, long addend)
 #ifdef CONFIG_64BIT
 static Elf_Addr get_fdesc(struct module *me, unsigned long value)
 {
-	Elf_Fdesc *fdesc = me->core_layout.base + me->arch.fdesc_offset;
+	Elf_Fdesc *fdesc = me->mem[MOD_TEXT].base + me->arch.fdesc_offset;
 
 	if (!value) {
 		printk(KERN_ERR "%s: zero OPD requested!\n", me->name);
@@ -407,7 +390,7 @@ static Elf_Addr get_fdesc(struct module *me, unsigned long value)
 
 	/* Create new one */
 	fdesc->addr = value;
-	fdesc->gp = (Elf_Addr)me->core_layout.base + me->arch.got_offset;
+	fdesc->gp = (Elf_Addr)me->mem[MOD_TEXT].base + me->arch.got_offset;
 	return (Elf_Addr)fdesc;
 }
 #endif /* CONFIG_64BIT */
@@ -742,7 +725,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 			       loc, val);
 			val += addend;
 			/* can we reach it locally? */
-			if (in_local(me, (void *)val)) {
+			if (within_module(val, me)) {
 				/* this is the case where the symbol is local
 				 * to the module, but in a different section,
 				 * so stub the jump in case it's more than 22
@@ -801,7 +784,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 			break;
 		case R_PARISC_FPTR64:
 			/* 64-bit function address */
-			if(in_local(me, (void *)(val + addend))) {
+			if (within_module(val + addend, me)) {
 				*loc64 = get_fdesc(me, val+addend);
 				pr_debug("FDESC for %s at %llx points to %llx\n",
 				       strtab + sym->st_name, *loc64,
@@ -839,7 +822,7 @@ register_unwind_table(struct module *me,
 
 	table = (unsigned char *)sechdrs[me->arch.unwind_section].sh_addr;
 	end = table + sechdrs[me->arch.unwind_section].sh_size;
-	gp = (Elf_Addr)me->core_layout.base + me->arch.got_offset;
+	gp = (Elf_Addr)me->mem[MOD_TEXT].base + me->arch.got_offset;
 
 	pr_debug("register_unwind_table(), sect = %d at 0x%p - 0x%p (gp=0x%lx)\n",
 	       me->arch.unwind_section, table, end, gp);
@@ -977,7 +960,7 @@ void module_arch_cleanup(struct module *mod)
 #ifdef CONFIG_64BIT
 void *dereference_module_function_descriptor(struct module *mod, void *ptr)
 {
-	unsigned long start_opd = (Elf64_Addr)mod->core_layout.base +
+	unsigned long start_opd = (Elf64_Addr)mod->mem[MOD_TEXT].base +
 				   mod->arch.fdesc_offset;
 	unsigned long end_opd = start_opd +
 				mod->arch.fdesc_count * sizeof(Elf64_Fdesc);
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index c064719b49b0..97c6f875bd0e 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -159,7 +159,7 @@ EXPORT_SYMBOL(running_on_qemu);
 /*
  * Called from the idle thread for the CPU which has been shutdown.
  */
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 #ifdef CONFIG_HOTPLUG_CPU
 	idle_task_exit();
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a6c4407d3ec8..e6614d76bf62 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -188,6 +188,7 @@ config PPC
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_VDSO_TIME_NS
+	select HAS_IOPORT			if PCI
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HUGE_VMALLOC		if HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_HUGE_VMAP		if PPC_RADIX_MMU || PPC_8xx
@@ -266,6 +267,7 @@ config PPC
 	select MMU_GATHER_PAGE_SIZE
 	select MMU_GATHER_RCU_TABLE_FREE
 	select MMU_GATHER_MERGE_VMAS
+	select MMU_LAZY_TLB_SHOOTDOWN		if PPC_BOOK3S_64
 	select MODULES_USE_ELF_RELA
 	select NEED_DMA_MAP_STATE		if PPC64 || NOT_COHERENT_CACHE
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK	if PPC64
@@ -895,34 +897,27 @@ config DATA_SHIFT
 	  8M pages will be pinned.
 
 config ARCH_FORCE_MAX_ORDER
-	int "Maximum zone order"
-	range 8 9 if PPC64 && PPC_64K_PAGES
-	default "9" if PPC64 && PPC_64K_PAGES
-	range 13 13 if PPC64 && !PPC_64K_PAGES
-	default "13" if PPC64 && !PPC_64K_PAGES
-	range 9 64 if PPC32 && PPC_16K_PAGES
-	default "9" if PPC32 && PPC_16K_PAGES
-	range 7 64 if PPC32 && PPC_64K_PAGES
-	default "7" if PPC32 && PPC_64K_PAGES
-	range 5 64 if PPC32 && PPC_256K_PAGES
-	default "5" if PPC32 && PPC_256K_PAGES
-	range 11 64
-	default "11"
+	int "Order of maximal physically contiguous allocations"
+	default "8" if PPC64 && PPC_64K_PAGES
+	default "12" if PPC64 && !PPC_64K_PAGES
+	default "8" if PPC32 && PPC_16K_PAGES
+	default "6" if PPC32 && PPC_64K_PAGES
+	default "4" if PPC32 && PPC_256K_PAGES
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
-
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
 	  The page size is not necessarily 4KB.  For example, on 64-bit
 	  systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES.  Keep
 	  this in mind when choosing a value for this option.
 
+	  Don't change if unsure.
+
 config PPC_SUBPAGE_PROT
 	bool "Support setting protections for 4k subpages (subpage_prot syscall)"
 	default n
diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
index ea719898b581..6cb7e90d52c1 100644
--- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig
+++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
@@ -30,7 +30,7 @@ CONFIG_PREEMPT=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-CONFIG_ARCH_FORCE_MAX_ORDER=17
+CONFIG_ARCH_FORCE_MAX_ORDER=16
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MSI=y
diff --git a/arch/powerpc/configs/fsl-emb-nonhw.config b/arch/powerpc/configs/fsl-emb-nonhw.config
index ab8a8c4530d9..3009b0efaf34 100644
--- a/arch/powerpc/configs/fsl-emb-nonhw.config
+++ b/arch/powerpc/configs/fsl-emb-nonhw.config
@@ -41,7 +41,7 @@ CONFIG_FIXED_PHY=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_8x8=y
 CONFIG_FONTS=y
-CONFIG_ARCH_FORCE_MAX_ORDER=13
+CONFIG_ARCH_FORCE_MAX_ORDER=12
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAME_WARN=1024
 CONFIG_FTL=y
diff --git a/arch/powerpc/configs/microwatt_defconfig b/arch/powerpc/configs/microwatt_defconfig
index 18d4fe4108cb..795a127908e7 100644
--- a/arch/powerpc/configs/microwatt_defconfig
+++ b/arch/powerpc/configs/microwatt_defconfig
@@ -4,7 +4,6 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index c92652575064..f2a9be02a8d2 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig
@@ -170,7 +170,6 @@ CONFIG_S2IO=m
 CONFIG_E100=y
 CONFIG_E1000=y
 CONFIG_E1000E=y
-CONFIG_IXGB=m
 CONFIG_IXGBE=m
 CONFIG_I40E=m
 CONFIG_MLX4_EN=m
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index d6949a6c5b2b..6c46e5560d96 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -182,7 +182,6 @@ CONFIG_IBMVNIC=m
 CONFIG_E100=y
 CONFIG_E1000=y
 CONFIG_E1000E=y
-CONFIG_IXGB=m
 CONFIG_IXGBE=m
 CONFIG_I40E=m
 CONFIG_MLX4_EN=m
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index f97a2d31bbf7..776c32964e12 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -102,7 +102,6 @@ CONFIG_PCNET32=y
 CONFIG_TIGON3=y
 CONFIG_E100=y
 CONFIG_E1000=y
-CONFIG_IXGB=m
 CONFIG_SUNGEM=y
 CONFIG_BROADCOM_PHY=m
 CONFIG_MARVELL_PHY=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index f73c98be56c8..ff3d79083581 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -455,7 +455,6 @@ CONFIG_E100=m
 CONFIG_E1000=m
 CONFIG_E1000E=m
 CONFIG_IGB=m
-CONFIG_IXGB=m
 CONFIG_IXGBE=m
 CONFIG_MV643XX_ETH=m
 CONFIG_SKGE=m
@@ -615,8 +614,6 @@ CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=m
 CONFIG_NVRAM=y
 CONFIG_DTLK=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
 CONFIG_IPWIRELESS=m
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HYDRA=m
@@ -846,7 +843,6 @@ CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
 CONFIG_USB_UHCI_HCD=m
-CONFIG_USB_U132_HCD=m
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
@@ -909,7 +905,6 @@ CONFIG_USB_SEVSEG=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
 CONFIG_USB_APPLEDISPLAY=m
 CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_LD=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 7497e17ea657..49b3ff4e3b18 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -164,7 +164,6 @@ CONFIG_IBMVNIC=y
 CONFIG_E100=y
 CONFIG_E1000=y
 CONFIG_E1000E=y
-CONFIG_IXGB=m
 CONFIG_IXGBE=m
 CONFIG_I40E=m
 CONFIG_MLX4_EN=m
diff --git a/arch/powerpc/configs/skiroot_defconfig b/arch/powerpc/configs/skiroot_defconfig
index e0964210f259..71cfb990a74f 100644
--- a/arch/powerpc/configs/skiroot_defconfig
+++ b/arch/powerpc/configs/skiroot_defconfig
@@ -149,7 +149,6 @@ CONFIG_BE2NET=m
 CONFIG_E1000=m
 CONFIG_E1000E=m
 CONFIG_IGB=m
-CONFIG_IXGB=m
 CONFIG_IXGBE=m
 CONFIG_I40E=m
 # CONFIG_NET_VENDOR_MARVELL is not set
diff --git a/arch/powerpc/crypto/Kconfig b/arch/powerpc/crypto/Kconfig
index c1b964447401..7113f9355165 100644
--- a/arch/powerpc/crypto/Kconfig
+++ b/arch/powerpc/crypto/Kconfig
@@ -94,4 +94,21 @@ config CRYPTO_AES_PPC_SPE
 	  architecture specific assembler implementations that work on 1KB
 	  tables or 256 bytes S-boxes.
 
+config CRYPTO_AES_GCM_P10
+	tristate "Stitched AES/GCM acceleration support on P10 or later CPU (PPC)"
+	depends on PPC64 && CPU_LITTLE_ENDIAN
+	select CRYPTO_LIB_AES
+	select CRYPTO_ALGAPI
+	select CRYPTO_AEAD
+	default m
+	help
+	  AEAD cipher: AES cipher algorithms (FIPS-197)
+	  GCM (Galois/Counter Mode) authenticated encryption mode (NIST SP800-38D)
+	  Architecture: powerpc64 using:
+	    - little-endian
+	    - Power10 or later features
+
+	  Support for cryptographic acceleration instructions on Power10 or
+	  later CPU. This module supports stitched acceleration for AES/GCM.
+
 endmenu
diff --git a/arch/powerpc/crypto/Makefile b/arch/powerpc/crypto/Makefile
index 4808d97fede5..05c7486f42c5 100644
--- a/arch/powerpc/crypto/Makefile
+++ b/arch/powerpc/crypto/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_CRYPTO_SHA256_PPC_SPE) += sha256-ppc-spe.o
 obj-$(CONFIG_CRYPTO_CRC32C_VPMSUM) += crc32c-vpmsum.o
 obj-$(CONFIG_CRYPTO_CRCT10DIF_VPMSUM) += crct10dif-vpmsum.o
 obj-$(CONFIG_CRYPTO_VPMSUM_TESTER) += crc-vpmsum_test.o
+obj-$(CONFIG_CRYPTO_AES_GCM_P10) += aes-gcm-p10-crypto.o
 
 aes-ppc-spe-y := aes-spe-core.o aes-spe-keys.o aes-tab-4k.o aes-spe-modes.o aes-spe-glue.o
 md5-ppc-y := md5-asm.o md5-glue.o
@@ -21,3 +22,15 @@ sha1-ppc-spe-y := sha1-spe-asm.o sha1-spe-glue.o
 sha256-ppc-spe-y := sha256-spe-asm.o sha256-spe-glue.o
 crc32c-vpmsum-y := crc32c-vpmsum_asm.o crc32c-vpmsum_glue.o
 crct10dif-vpmsum-y := crct10dif-vpmsum_asm.o crct10dif-vpmsum_glue.o
+aes-gcm-p10-crypto-y := aes-gcm-p10-glue.o aes-gcm-p10.o ghashp8-ppc.o aesp8-ppc.o
+
+quiet_cmd_perl = PERL    $@
+      cmd_perl = $(PERL) $< $(if $(CONFIG_CPU_LITTLE_ENDIAN), linux-ppc64le, linux-ppc64) > $@
+
+targets += aesp8-ppc.S ghashp8-ppc.S
+
+$(obj)/aesp8-ppc.S $(obj)/ghashp8-ppc.S: $(obj)/%.S: $(src)/%.pl FORCE
+	$(call if_changed,perl)
+
+OBJECT_FILES_NON_STANDARD_aesp8-ppc.o := y
+OBJECT_FILES_NON_STANDARD_ghashp8-ppc.o := y
diff --git a/arch/powerpc/crypto/aes-gcm-p10-glue.c b/arch/powerpc/crypto/aes-gcm-p10-glue.c
new file mode 100644
index 000000000000..bd3475f5348d
--- /dev/null
+++ b/arch/powerpc/crypto/aes-gcm-p10-glue.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Glue code for accelerated AES-GCM stitched implementation for ppc64le.
+ *
+ * Copyright 2022- IBM Inc. All rights reserved
+ */
+
+#include <asm/unaligned.h>
+#include <asm/simd.h>
+#include <asm/switch_to.h>
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <crypto/b128ops.h>
+#include <crypto/gf128mul.h>
+#include <crypto/internal/simd.h>
+#include <crypto/internal/aead.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/scatterwalk.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#define	PPC_ALIGN		16
+#define GCM_IV_SIZE		12
+
+MODULE_DESCRIPTION("PPC64le AES-GCM with Stitched implementation");
+MODULE_AUTHOR("Danny Tsen <dtsen@linux.ibm.com");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("aes");
+
+asmlinkage int aes_p8_set_encrypt_key(const u8 *userKey, const int bits,
+				      void *key);
+asmlinkage void aes_p8_encrypt(const u8 *in, u8 *out, const void *key);
+asmlinkage void aes_p10_gcm_encrypt(u8 *in, u8 *out, size_t len,
+				    void *rkey, u8 *iv, void *Xi);
+asmlinkage void aes_p10_gcm_decrypt(u8 *in, u8 *out, size_t len,
+				    void *rkey, u8 *iv, void *Xi);
+asmlinkage void gcm_init_htable(unsigned char htable[256], unsigned char Xi[16]);
+asmlinkage void gcm_ghash_p8(unsigned char *Xi, unsigned char *Htable,
+		unsigned char *aad, unsigned int alen);
+
+struct aes_key {
+	u8 key[AES_MAX_KEYLENGTH];
+	u64 rounds;
+};
+
+struct gcm_ctx {
+	u8 iv[16];
+	u8 ivtag[16];
+	u8 aad_hash[16];
+	u64 aadLen;
+	u64 Plen;	/* offset 56 - used in aes_p10_gcm_{en/de}crypt */
+};
+struct Hash_ctx {
+	u8 H[16];	/* subkey */
+	u8 Htable[256];	/* Xi, Hash table(offset 32) */
+};
+
+struct p10_aes_gcm_ctx {
+	struct aes_key enc_key;
+};
+
+static void vsx_begin(void)
+{
+	preempt_disable();
+	enable_kernel_vsx();
+}
+
+static void vsx_end(void)
+{
+	disable_kernel_vsx();
+	preempt_enable();
+}
+
+static void set_subkey(unsigned char *hash)
+{
+	*(u64 *)&hash[0] = be64_to_cpup((__be64 *)&hash[0]);
+	*(u64 *)&hash[8] = be64_to_cpup((__be64 *)&hash[8]);
+}
+
+/*
+ * Compute aad if any.
+ *   - Hash aad and copy to Xi.
+ */
+static void set_aad(struct gcm_ctx *gctx, struct Hash_ctx *hash,
+		    unsigned char *aad, int alen)
+{
+	int i;
+	u8 nXi[16] = {0, };
+
+	gctx->aadLen = alen;
+	i = alen & ~0xf;
+	if (i) {
+		gcm_ghash_p8(nXi, hash->Htable+32, aad, i);
+		aad += i;
+		alen -= i;
+	}
+	if (alen) {
+		for (i = 0; i < alen; i++)
+			nXi[i] ^= aad[i];
+
+		memset(gctx->aad_hash, 0, 16);
+		gcm_ghash_p8(gctx->aad_hash, hash->Htable+32, nXi, 16);
+	} else {
+		memcpy(gctx->aad_hash, nXi, 16);
+	}
+
+	memcpy(hash->Htable, gctx->aad_hash, 16);
+}
+
+static void gcmp10_init(struct gcm_ctx *gctx, u8 *iv, unsigned char *rdkey,
+			struct Hash_ctx *hash, u8 *assoc, unsigned int assoclen)
+{
+	__be32 counter = cpu_to_be32(1);
+
+	aes_p8_encrypt(hash->H, hash->H, rdkey);
+	set_subkey(hash->H);
+	gcm_init_htable(hash->Htable+32, hash->H);
+
+	*((__be32 *)(iv+12)) = counter;
+
+	gctx->Plen = 0;
+
+	/*
+	 * Encrypt counter vector as iv tag and increment counter.
+	 */
+	aes_p8_encrypt(iv, gctx->ivtag, rdkey);
+
+	counter = cpu_to_be32(2);
+	*((__be32 *)(iv+12)) = counter;
+	memcpy(gctx->iv, iv, 16);
+
+	gctx->aadLen = assoclen;
+	memset(gctx->aad_hash, 0, 16);
+	if (assoclen)
+		set_aad(gctx, hash, assoc, assoclen);
+}
+
+static void finish_tag(struct gcm_ctx *gctx, struct Hash_ctx *hash, int len)
+{
+	int i;
+	unsigned char len_ac[16 + PPC_ALIGN];
+	unsigned char *aclen = PTR_ALIGN((void *)len_ac, PPC_ALIGN);
+	__be64 clen = cpu_to_be64(len << 3);
+	__be64 alen = cpu_to_be64(gctx->aadLen << 3);
+
+	if (len == 0 && gctx->aadLen == 0) {
+		memcpy(hash->Htable, gctx->ivtag, 16);
+		return;
+	}
+
+	/*
+	 * Len is in bits.
+	 */
+	*((__be64 *)(aclen)) = alen;
+	*((__be64 *)(aclen+8)) = clen;
+
+	/*
+	 * hash (AAD len and len)
+	 */
+	gcm_ghash_p8(hash->Htable, hash->Htable+32, aclen, 16);
+
+	for (i = 0; i < 16; i++)
+		hash->Htable[i] ^= gctx->ivtag[i];
+}
+
+static int set_authsize(struct crypto_aead *tfm, unsigned int authsize)
+{
+	switch (authsize) {
+	case 4:
+	case 8:
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+	case 16:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int p10_aes_gcm_setkey(struct crypto_aead *aead, const u8 *key,
+			     unsigned int keylen)
+{
+	struct crypto_tfm *tfm = crypto_aead_tfm(aead);
+	struct p10_aes_gcm_ctx *ctx = crypto_tfm_ctx(tfm);
+	int ret;
+
+	vsx_begin();
+	ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key);
+	vsx_end();
+
+	return ret ? -EINVAL : 0;
+}
+
+static int p10_aes_gcm_crypt(struct aead_request *req, int enc)
+{
+	struct crypto_tfm *tfm = req->base.tfm;
+	struct p10_aes_gcm_ctx *ctx = crypto_tfm_ctx(tfm);
+	u8 databuf[sizeof(struct gcm_ctx) + PPC_ALIGN];
+	struct gcm_ctx *gctx = PTR_ALIGN((void *)databuf, PPC_ALIGN);
+	u8 hashbuf[sizeof(struct Hash_ctx) + PPC_ALIGN];
+	struct Hash_ctx *hash = PTR_ALIGN((void *)hashbuf, PPC_ALIGN);
+	struct scatter_walk assoc_sg_walk;
+	struct skcipher_walk walk;
+	u8 *assocmem = NULL;
+	u8 *assoc;
+	unsigned int assoclen = req->assoclen;
+	unsigned int cryptlen = req->cryptlen;
+	unsigned char ivbuf[AES_BLOCK_SIZE+PPC_ALIGN];
+	unsigned char *iv = PTR_ALIGN((void *)ivbuf, PPC_ALIGN);
+	int ret;
+	unsigned long auth_tag_len = crypto_aead_authsize(__crypto_aead_cast(tfm));
+	u8 otag[16];
+	int total_processed = 0;
+
+	memset(databuf, 0, sizeof(databuf));
+	memset(hashbuf, 0, sizeof(hashbuf));
+	memset(ivbuf, 0, sizeof(ivbuf));
+	memcpy(iv, req->iv, GCM_IV_SIZE);
+
+	/* Linearize assoc, if not already linear */
+	if (req->src->length >= assoclen && req->src->length) {
+		scatterwalk_start(&assoc_sg_walk, req->src);
+		assoc = scatterwalk_map(&assoc_sg_walk);
+	} else {
+		gfp_t flags = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
+			      GFP_KERNEL : GFP_ATOMIC;
+
+		/* assoc can be any length, so must be on heap */
+		assocmem = kmalloc(assoclen, flags);
+		if (unlikely(!assocmem))
+			return -ENOMEM;
+		assoc = assocmem;
+
+		scatterwalk_map_and_copy(assoc, req->src, 0, assoclen, 0);
+	}
+
+	vsx_begin();
+	gcmp10_init(gctx, iv, (unsigned char *) &ctx->enc_key, hash, assoc, assoclen);
+	vsx_end();
+
+	if (!assocmem)
+		scatterwalk_unmap(assoc);
+	else
+		kfree(assocmem);
+
+	if (enc)
+		ret = skcipher_walk_aead_encrypt(&walk, req, false);
+	else
+		ret = skcipher_walk_aead_decrypt(&walk, req, false);
+	if (ret)
+		return ret;
+
+	while (walk.nbytes > 0 && ret == 0) {
+
+		vsx_begin();
+		if (enc)
+			aes_p10_gcm_encrypt(walk.src.virt.addr,
+					    walk.dst.virt.addr,
+					    walk.nbytes,
+					    &ctx->enc_key, gctx->iv, hash->Htable);
+		else
+			aes_p10_gcm_decrypt(walk.src.virt.addr,
+					    walk.dst.virt.addr,
+					    walk.nbytes,
+					    &ctx->enc_key, gctx->iv, hash->Htable);
+		vsx_end();
+
+		total_processed += walk.nbytes;
+		ret = skcipher_walk_done(&walk, 0);
+	}
+
+	if (ret)
+		return ret;
+
+	/* Finalize hash */
+	vsx_begin();
+	finish_tag(gctx, hash, total_processed);
+	vsx_end();
+
+	/* copy Xi to end of dst */
+	if (enc)
+		scatterwalk_map_and_copy(hash->Htable, req->dst, req->assoclen + cryptlen,
+					 auth_tag_len, 1);
+	else {
+		scatterwalk_map_and_copy(otag, req->src,
+					 req->assoclen + cryptlen - auth_tag_len,
+					 auth_tag_len, 0);
+
+		if (crypto_memneq(otag, hash->Htable, auth_tag_len)) {
+			memzero_explicit(hash->Htable, 16);
+			return -EBADMSG;
+		}
+	}
+
+	return 0;
+}
+
+static int p10_aes_gcm_encrypt(struct aead_request *req)
+{
+	return p10_aes_gcm_crypt(req, 1);
+}
+
+static int p10_aes_gcm_decrypt(struct aead_request *req)
+{
+	return p10_aes_gcm_crypt(req, 0);
+}
+
+static struct aead_alg gcm_aes_alg = {
+	.ivsize			= GCM_IV_SIZE,
+	.maxauthsize		= 16,
+
+	.setauthsize		= set_authsize,
+	.setkey			= p10_aes_gcm_setkey,
+	.encrypt		= p10_aes_gcm_encrypt,
+	.decrypt		= p10_aes_gcm_decrypt,
+
+	.base.cra_name		= "gcm(aes)",
+	.base.cra_driver_name	= "aes_gcm_p10",
+	.base.cra_priority	= 2100,
+	.base.cra_blocksize	= 1,
+	.base.cra_ctxsize	= sizeof(struct p10_aes_gcm_ctx),
+	.base.cra_module	= THIS_MODULE,
+};
+
+static int __init p10_init(void)
+{
+	return crypto_register_aead(&gcm_aes_alg);
+}
+
+static void __exit p10_exit(void)
+{
+	crypto_unregister_aead(&gcm_aes_alg);
+}
+
+module_cpu_feature_match(PPC_MODULE_FEATURE_P10, p10_init);
+module_exit(p10_exit);
diff --git a/arch/powerpc/crypto/aes-gcm-p10.S b/arch/powerpc/crypto/aes-gcm-p10.S
new file mode 100644
index 000000000000..a51f4b265308
--- /dev/null
+++ b/arch/powerpc/crypto/aes-gcm-p10.S
@@ -0,0 +1,1521 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+ #
+ # Accelerated AES-GCM stitched implementation for ppc64le.
+ #
+ # Copyright 2022- IBM Inc. All rights reserved
+ #
+ #===================================================================================
+ # Written by Danny Tsen <dtsen@linux.ibm.com>
+ #
+ # GHASH is based on the Karatsuba multiplication method.
+ #
+ #    Xi xor X1
+ #
+ #    X1 * H^4 + X2 * H^3 + x3 * H^2 + X4 * H =
+ #      (X1.h * H4.h + xX.l * H4.l + X1 * H4) +
+ #      (X2.h * H3.h + X2.l * H3.l + X2 * H3) +
+ #      (X3.h * H2.h + X3.l * H2.l + X3 * H2) +
+ #      (X4.h * H.h + X4.l * H.l + X4 * H)
+ #
+ # Xi = v0
+ # H Poly = v2
+ # Hash keys = v3 - v14
+ #     ( H.l, H, H.h)
+ #     ( H^2.l, H^2, H^2.h)
+ #     ( H^3.l, H^3, H^3.h)
+ #     ( H^4.l, H^4, H^4.h)
+ #
+ # v30 is IV
+ # v31 - counter 1
+ #
+ # AES used,
+ #     vs0 - vs14 for round keys
+ #     v15, v16, v17, v18, v19, v20, v21, v22 for 8 blocks (encrypted)
+ #
+ # This implementation uses stitched AES-GCM approach to improve overall performance.
+ # AES is implemented with 8x blocks and GHASH is using 2 4x blocks.
+ #
+ # ===================================================================================
+ #
+
+#include <asm/ppc_asm.h>
+#include <linux/linkage.h>
+
+.machine        "any"
+.text
+
+ # 4x loops
+ # v15 - v18 - input states
+ # vs1 - vs9 - round keys
+ #
+.macro Loop_aes_middle4x
+	xxlor	19+32, 1, 1
+	xxlor	20+32, 2, 2
+	xxlor	21+32, 3, 3
+	xxlor	22+32, 4, 4
+
+	vcipher	15, 15, 19
+	vcipher	16, 16, 19
+	vcipher	17, 17, 19
+	vcipher	18, 18, 19
+
+	vcipher	15, 15, 20
+	vcipher	16, 16, 20
+	vcipher	17, 17, 20
+	vcipher	18, 18, 20
+
+	vcipher	15, 15, 21
+	vcipher	16, 16, 21
+	vcipher	17, 17, 21
+	vcipher	18, 18, 21
+
+	vcipher	15, 15, 22
+	vcipher	16, 16, 22
+	vcipher	17, 17, 22
+	vcipher	18, 18, 22
+
+	xxlor	19+32, 5, 5
+	xxlor	20+32, 6, 6
+	xxlor	21+32, 7, 7
+	xxlor	22+32, 8, 8
+
+	vcipher	15, 15, 19
+	vcipher	16, 16, 19
+	vcipher	17, 17, 19
+	vcipher	18, 18, 19
+
+	vcipher	15, 15, 20
+	vcipher	16, 16, 20
+	vcipher	17, 17, 20
+	vcipher	18, 18, 20
+
+	vcipher	15, 15, 21
+	vcipher	16, 16, 21
+	vcipher	17, 17, 21
+	vcipher	18, 18, 21
+
+	vcipher	15, 15, 22
+	vcipher	16, 16, 22
+	vcipher	17, 17, 22
+	vcipher	18, 18, 22
+
+	xxlor	23+32, 9, 9
+	vcipher	15, 15, 23
+	vcipher	16, 16, 23
+	vcipher	17, 17, 23
+	vcipher	18, 18, 23
+.endm
+
+ # 8x loops
+ # v15 - v22 - input states
+ # vs1 - vs9 - round keys
+ #
+.macro Loop_aes_middle8x
+	xxlor	23+32, 1, 1
+	xxlor	24+32, 2, 2
+	xxlor	25+32, 3, 3
+	xxlor	26+32, 4, 4
+
+	vcipher	15, 15, 23
+	vcipher	16, 16, 23
+	vcipher	17, 17, 23
+	vcipher	18, 18, 23
+	vcipher	19, 19, 23
+	vcipher	20, 20, 23
+	vcipher	21, 21, 23
+	vcipher	22, 22, 23
+
+	vcipher	15, 15, 24
+	vcipher	16, 16, 24
+	vcipher	17, 17, 24
+	vcipher	18, 18, 24
+	vcipher	19, 19, 24
+	vcipher	20, 20, 24
+	vcipher	21, 21, 24
+	vcipher	22, 22, 24
+
+	vcipher	15, 15, 25
+	vcipher	16, 16, 25
+	vcipher	17, 17, 25
+	vcipher	18, 18, 25
+	vcipher	19, 19, 25
+	vcipher	20, 20, 25
+	vcipher	21, 21, 25
+	vcipher	22, 22, 25
+
+	vcipher	15, 15, 26
+	vcipher	16, 16, 26
+	vcipher	17, 17, 26
+	vcipher	18, 18, 26
+	vcipher	19, 19, 26
+	vcipher	20, 20, 26
+	vcipher	21, 21, 26
+	vcipher	22, 22, 26
+
+	xxlor	23+32, 5, 5
+	xxlor	24+32, 6, 6
+	xxlor	25+32, 7, 7
+	xxlor	26+32, 8, 8
+
+	vcipher	15, 15, 23
+	vcipher	16, 16, 23
+	vcipher	17, 17, 23
+	vcipher	18, 18, 23
+	vcipher	19, 19, 23
+	vcipher	20, 20, 23
+	vcipher	21, 21, 23
+	vcipher	22, 22, 23
+
+	vcipher	15, 15, 24
+	vcipher	16, 16, 24
+	vcipher	17, 17, 24
+	vcipher	18, 18, 24
+	vcipher	19, 19, 24
+	vcipher	20, 20, 24
+	vcipher	21, 21, 24
+	vcipher	22, 22, 24
+
+	vcipher	15, 15, 25
+	vcipher	16, 16, 25
+	vcipher	17, 17, 25
+	vcipher	18, 18, 25
+	vcipher	19, 19, 25
+	vcipher	20, 20, 25
+	vcipher	21, 21, 25
+	vcipher	22, 22, 25
+
+	vcipher	15, 15, 26
+	vcipher	16, 16, 26
+	vcipher	17, 17, 26
+	vcipher	18, 18, 26
+	vcipher	19, 19, 26
+	vcipher	20, 20, 26
+	vcipher	21, 21, 26
+	vcipher	22, 22, 26
+
+	xxlor	23+32, 9, 9
+	vcipher	15, 15, 23
+	vcipher	16, 16, 23
+	vcipher	17, 17, 23
+	vcipher	18, 18, 23
+	vcipher	19, 19, 23
+	vcipher	20, 20, 23
+	vcipher	21, 21, 23
+	vcipher	22, 22, 23
+.endm
+
+.macro Loop_aes_middle_1x
+	xxlor	19+32, 1, 1
+	xxlor	20+32, 2, 2
+	xxlor	21+32, 3, 3
+	xxlor	22+32, 4, 4
+
+	vcipher 15, 15, 19
+	vcipher 15, 15, 20
+	vcipher 15, 15, 21
+	vcipher 15, 15, 22
+
+	xxlor	19+32, 5, 5
+	xxlor	20+32, 6, 6
+	xxlor	21+32, 7, 7
+	xxlor	22+32, 8, 8
+
+	vcipher 15, 15, 19
+	vcipher 15, 15, 20
+	vcipher 15, 15, 21
+	vcipher 15, 15, 22
+
+	xxlor	19+32, 9, 9
+	vcipher 15, 15, 19
+.endm
+
+ #
+ # Compute 4x hash values based on Karatsuba method.
+ #
+.macro ppc_aes_gcm_ghash
+	vxor		15, 15, 0
+
+	vpmsumd		23, 12, 15		# H4.L * X.L
+	vpmsumd		24, 9, 16
+	vpmsumd		25, 6, 17
+	vpmsumd		26, 3, 18
+
+	vxor		23, 23, 24
+	vxor		23, 23, 25
+	vxor		23, 23, 26		# L
+
+	vpmsumd		24, 13, 15		# H4.L * X.H + H4.H * X.L
+	vpmsumd		25, 10, 16		# H3.L * X1.H + H3.H * X1.L
+	vpmsumd		26, 7, 17
+	vpmsumd		27, 4, 18
+
+	vxor		24, 24, 25
+	vxor		24, 24, 26
+	vxor		24, 24, 27		# M
+
+	# sum hash and reduction with H Poly
+	vpmsumd		28, 23, 2		# reduction
+
+	vxor		29, 29, 29
+	vsldoi		26, 24, 29, 8		# mL
+	vsldoi		29, 29, 24, 8		# mH
+	vxor		23, 23, 26		# mL + L
+
+	vsldoi		23, 23, 23, 8		# swap
+	vxor		23, 23, 28
+
+	vpmsumd		24, 14, 15		# H4.H * X.H
+	vpmsumd		25, 11, 16
+	vpmsumd		26, 8, 17
+	vpmsumd		27, 5, 18
+
+	vxor		24, 24, 25
+	vxor		24, 24, 26
+	vxor		24, 24, 27
+
+	vxor		24, 24, 29
+
+	# sum hash and reduction with H Poly
+	vsldoi		27, 23, 23, 8		# swap
+	vpmsumd		23, 23, 2
+	vxor		27, 27, 24
+	vxor		23, 23, 27
+
+	xxlor		32, 23+32, 23+32		# update hash
+
+.endm
+
+ #
+ # Combine two 4x ghash
+ # v15 - v22 - input blocks
+ #
+.macro ppc_aes_gcm_ghash2_4x
+	# first 4x hash
+	vxor		15, 15, 0		# Xi + X
+
+	vpmsumd		23, 12, 15		# H4.L * X.L
+	vpmsumd		24, 9, 16
+	vpmsumd		25, 6, 17
+	vpmsumd		26, 3, 18
+
+	vxor		23, 23, 24
+	vxor		23, 23, 25
+	vxor		23, 23, 26		# L
+
+	vpmsumd		24, 13, 15		# H4.L * X.H + H4.H * X.L
+	vpmsumd		25, 10, 16		# H3.L * X1.H + H3.H * X1.L
+	vpmsumd		26, 7, 17
+	vpmsumd		27, 4, 18
+
+	vxor		24, 24, 25
+	vxor		24, 24, 26
+
+	# sum hash and reduction with H Poly
+	vpmsumd		28, 23, 2		# reduction
+
+	vxor		29, 29, 29
+
+	vxor		24, 24, 27		# M
+	vsldoi		26, 24, 29, 8		# mL
+	vsldoi		29, 29, 24, 8		# mH
+	vxor		23, 23, 26		# mL + L
+
+	vsldoi		23, 23, 23, 8		# swap
+	vxor		23, 23, 28
+
+	vpmsumd		24, 14, 15		# H4.H * X.H
+	vpmsumd		25, 11, 16
+	vpmsumd		26, 8, 17
+	vpmsumd		27, 5, 18
+
+	vxor		24, 24, 25
+	vxor		24, 24, 26
+	vxor		24, 24, 27		# H
+
+	vxor		24, 24, 29		# H + mH
+
+	# sum hash and reduction with H Poly
+	vsldoi		27, 23, 23, 8		# swap
+	vpmsumd		23, 23, 2
+	vxor		27, 27, 24
+	vxor		27, 23, 27		# 1st Xi
+
+	# 2nd 4x hash
+	vpmsumd		24, 9, 20
+	vpmsumd		25, 6, 21
+	vpmsumd		26, 3, 22
+	vxor		19, 19, 27		# Xi + X
+	vpmsumd		23, 12, 19		# H4.L * X.L
+
+	vxor		23, 23, 24
+	vxor		23, 23, 25
+	vxor		23, 23, 26		# L
+
+	vpmsumd		24, 13, 19		# H4.L * X.H + H4.H * X.L
+	vpmsumd		25, 10, 20		# H3.L * X1.H + H3.H * X1.L
+	vpmsumd		26, 7, 21
+	vpmsumd		27, 4, 22
+
+	vxor		24, 24, 25
+	vxor		24, 24, 26
+
+	# sum hash and reduction with H Poly
+	vpmsumd		28, 23, 2		# reduction
+
+	vxor		29, 29, 29
+
+	vxor		24, 24, 27		# M
+	vsldoi		26, 24, 29, 8		# mL
+	vsldoi		29, 29, 24, 8		# mH
+	vxor		23, 23, 26		# mL + L
+
+	vsldoi		23, 23, 23, 8		# swap
+	vxor		23, 23, 28
+
+	vpmsumd		24, 14, 19		# H4.H * X.H
+	vpmsumd		25, 11, 20
+	vpmsumd		26, 8, 21
+	vpmsumd		27, 5, 22
+
+	vxor		24, 24, 25
+	vxor		24, 24, 26
+	vxor		24, 24, 27		# H
+
+	vxor		24, 24, 29		# H + mH
+
+	# sum hash and reduction with H Poly
+	vsldoi		27, 23, 23, 8		# swap
+	vpmsumd		23, 23, 2
+	vxor		27, 27, 24
+	vxor		23, 23, 27
+
+	xxlor		32, 23+32, 23+32		# update hash
+
+.endm
+
+ #
+ # Compute update single hash
+ #
+.macro ppc_update_hash_1x
+	vxor		28, 28, 0
+
+	vxor		19, 19, 19
+
+	vpmsumd		22, 3, 28		# L
+	vpmsumd		23, 4, 28		# M
+	vpmsumd		24, 5, 28		# H
+
+	vpmsumd		27, 22, 2		# reduction
+
+	vsldoi		25, 23, 19, 8		# mL
+	vsldoi		26, 19, 23, 8		# mH
+	vxor		22, 22, 25		# LL + LL
+	vxor		24, 24, 26		# HH + HH
+
+	vsldoi		22, 22, 22, 8		# swap
+	vxor		22, 22, 27
+
+	vsldoi		20, 22, 22, 8		# swap
+	vpmsumd		22, 22, 2		# reduction
+	vxor		20, 20, 24
+	vxor		22, 22, 20
+
+	vmr		0, 22			# update hash
+
+.endm
+
+.macro SAVE_REGS
+	stdu 1,-640(1)
+	mflr 0
+
+	std	14,112(1)
+	std	15,120(1)
+	std	16,128(1)
+	std	17,136(1)
+	std	18,144(1)
+	std	19,152(1)
+	std	20,160(1)
+	std	21,168(1)
+	li	9, 256
+	stvx	20, 9, 1
+	addi	9, 9, 16
+	stvx	21, 9, 1
+	addi	9, 9, 16
+	stvx	22, 9, 1
+	addi	9, 9, 16
+	stvx	23, 9, 1
+	addi	9, 9, 16
+	stvx	24, 9, 1
+	addi	9, 9, 16
+	stvx	25, 9, 1
+	addi	9, 9, 16
+	stvx	26, 9, 1
+	addi	9, 9, 16
+	stvx	27, 9, 1
+	addi	9, 9, 16
+	stvx	28, 9, 1
+	addi	9, 9, 16
+	stvx	29, 9, 1
+	addi	9, 9, 16
+	stvx	30, 9, 1
+	addi	9, 9, 16
+	stvx	31, 9, 1
+	stxv	14, 464(1)
+	stxv	15, 480(1)
+	stxv	16, 496(1)
+	stxv	17, 512(1)
+	stxv	18, 528(1)
+	stxv	19, 544(1)
+	stxv	20, 560(1)
+	stxv	21, 576(1)
+	stxv	22, 592(1)
+	std	0, 656(1)
+.endm
+
+.macro RESTORE_REGS
+	lxv	14, 464(1)
+	lxv	15, 480(1)
+	lxv	16, 496(1)
+	lxv	17, 512(1)
+	lxv	18, 528(1)
+	lxv	19, 544(1)
+	lxv	20, 560(1)
+	lxv	21, 576(1)
+	lxv	22, 592(1)
+	li	9, 256
+	lvx	20, 9, 1
+	addi	9, 9, 16
+	lvx	21, 9, 1
+	addi	9, 9, 16
+	lvx	22, 9, 1
+	addi	9, 9, 16
+	lvx	23, 9, 1
+	addi	9, 9, 16
+	lvx	24, 9, 1
+	addi	9, 9, 16
+	lvx	25, 9, 1
+	addi	9, 9, 16
+	lvx	26, 9, 1
+	addi	9, 9, 16
+	lvx	27, 9, 1
+	addi	9, 9, 16
+	lvx	28, 9, 1
+	addi	9, 9, 16
+	lvx	29, 9, 1
+	addi	9, 9, 16
+	lvx	30, 9, 1
+	addi	9, 9, 16
+	lvx	31, 9, 1
+
+	ld	0, 656(1)
+	ld      14,112(1)
+	ld      15,120(1)
+	ld      16,128(1)
+	ld      17,136(1)
+	ld      18,144(1)
+	ld      19,152(1)
+	ld      20,160(1)
+	ld	21,168(1)
+
+	mtlr	0
+	addi	1, 1, 640
+.endm
+
+.macro LOAD_HASH_TABLE
+	# Load Xi
+	lxvb16x	32, 0, 8	# load Xi
+
+	# load Hash - h^4, h^3, h^2, h
+	li	10, 32
+	lxvd2x	2+32, 10, 8	# H Poli
+	li	10, 48
+	lxvd2x	3+32, 10, 8	# Hl
+	li	10, 64
+	lxvd2x	4+32, 10, 8	# H
+	li	10, 80
+	lxvd2x	5+32, 10, 8	# Hh
+
+	li	10, 96
+	lxvd2x	6+32, 10, 8	# H^2l
+	li	10, 112
+	lxvd2x	7+32, 10, 8	# H^2
+	li	10, 128
+	lxvd2x	8+32, 10, 8	# H^2h
+
+	li	10, 144
+	lxvd2x	9+32, 10, 8	# H^3l
+	li	10, 160
+	lxvd2x	10+32, 10, 8	# H^3
+	li	10, 176
+	lxvd2x	11+32, 10, 8	# H^3h
+
+	li	10, 192
+	lxvd2x	12+32, 10, 8	# H^4l
+	li	10, 208
+	lxvd2x	13+32, 10, 8	# H^4
+	li	10, 224
+	lxvd2x	14+32, 10, 8	# H^4h
+.endm
+
+ #
+ # aes_p10_gcm_encrypt (const void *inp, void *out, size_t len,
+ #               const char *rk, unsigned char iv[16], void *Xip);
+ #
+ #    r3 - inp
+ #    r4 - out
+ #    r5 - len
+ #    r6 - AES round keys
+ #    r7 - iv and other data
+ #    r8 - Xi, HPoli, hash keys
+ #
+ #    rounds is at offset 240 in rk
+ #    Xi is at 0 in gcm_table (Xip).
+ #
+_GLOBAL(aes_p10_gcm_encrypt)
+.align 5
+
+	SAVE_REGS
+
+	LOAD_HASH_TABLE
+
+	# initialize ICB: GHASH( IV ), IV - r7
+	lxvb16x	30+32, 0, 7	# load IV  - v30
+
+	mr	12, 5		# length
+	li	11, 0		# block index
+
+	# counter 1
+	vxor	31, 31, 31
+	vspltisb 22, 1
+	vsldoi	31, 31, 22,1	# counter 1
+
+	# load round key to VSR
+	lxv	0, 0(6)
+	lxv	1, 0x10(6)
+	lxv	2, 0x20(6)
+	lxv	3, 0x30(6)
+	lxv	4, 0x40(6)
+	lxv	5, 0x50(6)
+	lxv	6, 0x60(6)
+	lxv	7, 0x70(6)
+	lxv	8, 0x80(6)
+	lxv	9, 0x90(6)
+	lxv	10, 0xa0(6)
+
+	# load rounds - 10 (128), 12 (192), 14 (256)
+	lwz	9,240(6)
+
+	#
+	# vxor	state, state, w # addroundkey
+	xxlor	32+29, 0, 0
+	vxor	15, 30, 29	# IV + round key - add round key 0
+
+	cmpdi	9, 10
+	beq	Loop_aes_gcm_8x
+
+	# load 2 more round keys (v11, v12)
+	lxv	11, 0xb0(6)
+	lxv	12, 0xc0(6)
+
+	cmpdi	9, 12
+	beq	Loop_aes_gcm_8x
+
+	# load 2 more round keys (v11, v12, v13, v14)
+	lxv	13, 0xd0(6)
+	lxv	14, 0xe0(6)
+	cmpdi	9, 14
+	beq	Loop_aes_gcm_8x
+
+	b	aes_gcm_out
+
+.align 5
+Loop_aes_gcm_8x:
+	mr	14, 3
+	mr	9, 4
+
+	#
+	# check partial block
+	#
+Continue_partial_check:
+	ld	15, 56(7)
+	cmpdi	15, 0
+	beq	Continue
+	bgt	Final_block
+	cmpdi	15, 16
+	blt	Final_block
+
+Continue:
+	# n blcoks
+	li	10, 128
+	divdu	10, 12, 10	# n 128 bytes-blocks
+	cmpdi	10, 0
+	beq	Loop_last_block
+
+	vaddudm	30, 30, 31	# IV + counter
+	vxor	16, 30, 29
+	vaddudm	30, 30, 31
+	vxor	17, 30, 29
+	vaddudm	30, 30, 31
+	vxor	18, 30, 29
+	vaddudm	30, 30, 31
+	vxor	19, 30, 29
+	vaddudm	30, 30, 31
+	vxor	20, 30, 29
+	vaddudm	30, 30, 31
+	vxor	21, 30, 29
+	vaddudm	30, 30, 31
+	vxor	22, 30, 29
+
+	mtctr	10
+
+	li	15, 16
+	li	16, 32
+	li	17, 48
+	li	18, 64
+	li	19, 80
+	li	20, 96
+	li	21, 112
+
+	lwz	10, 240(6)
+
+Loop_8x_block:
+
+	lxvb16x		15, 0, 14	# load block
+	lxvb16x		16, 15, 14	# load block
+	lxvb16x		17, 16, 14	# load block
+	lxvb16x		18, 17, 14	# load block
+	lxvb16x		19, 18, 14	# load block
+	lxvb16x		20, 19, 14	# load block
+	lxvb16x		21, 20, 14	# load block
+	lxvb16x		22, 21, 14	# load block
+	addi		14, 14, 128
+
+	Loop_aes_middle8x
+
+	xxlor	23+32, 10, 10
+
+	cmpdi	10, 10
+	beq	Do_next_ghash
+
+	# 192 bits
+	xxlor	24+32, 11, 11
+
+	vcipher	15, 15, 23
+	vcipher	16, 16, 23
+	vcipher	17, 17, 23
+	vcipher	18, 18, 23
+	vcipher	19, 19, 23
+	vcipher	20, 20, 23
+	vcipher	21, 21, 23
+	vcipher	22, 22, 23
+
+	vcipher	15, 15, 24
+	vcipher	16, 16, 24
+	vcipher	17, 17, 24
+	vcipher	18, 18, 24
+	vcipher	19, 19, 24
+	vcipher	20, 20, 24
+	vcipher	21, 21, 24
+	vcipher	22, 22, 24
+
+	xxlor	23+32, 12, 12
+
+	cmpdi	10, 12
+	beq	Do_next_ghash
+
+	# 256 bits
+	xxlor	24+32, 13, 13
+
+	vcipher	15, 15, 23
+	vcipher	16, 16, 23
+	vcipher	17, 17, 23
+	vcipher	18, 18, 23
+	vcipher	19, 19, 23
+	vcipher	20, 20, 23
+	vcipher	21, 21, 23
+	vcipher	22, 22, 23
+
+	vcipher	15, 15, 24
+	vcipher	16, 16, 24
+	vcipher	17, 17, 24
+	vcipher	18, 18, 24
+	vcipher	19, 19, 24
+	vcipher	20, 20, 24
+	vcipher	21, 21, 24
+	vcipher	22, 22, 24
+
+	xxlor	23+32, 14, 14
+
+	cmpdi	10, 14
+	beq	Do_next_ghash
+	b	aes_gcm_out
+
+Do_next_ghash:
+
+	#
+	# last round
+	vcipherlast     15, 15, 23
+	vcipherlast     16, 16, 23
+
+	xxlxor		47, 47, 15
+	stxvb16x        47, 0, 9	# store output
+	xxlxor		48, 48, 16
+	stxvb16x        48, 15, 9	# store output
+
+	vcipherlast     17, 17, 23
+	vcipherlast     18, 18, 23
+
+	xxlxor		49, 49, 17
+	stxvb16x        49, 16, 9	# store output
+	xxlxor		50, 50, 18
+	stxvb16x        50, 17, 9	# store output
+
+	vcipherlast     19, 19, 23
+	vcipherlast     20, 20, 23
+
+	xxlxor		51, 51, 19
+	stxvb16x        51, 18, 9	# store output
+	xxlxor		52, 52, 20
+	stxvb16x        52, 19, 9	# store output
+
+	vcipherlast     21, 21, 23
+	vcipherlast     22, 22, 23
+
+	xxlxor		53, 53, 21
+	stxvb16x        53, 20, 9	# store output
+	xxlxor		54, 54, 22
+	stxvb16x        54, 21, 9	# store output
+
+	addi		9, 9, 128
+
+	# ghash here
+	ppc_aes_gcm_ghash2_4x
+
+	xxlor	27+32, 0, 0
+	vaddudm 30, 30, 31		# IV + counter
+	vmr	29, 30
+	vxor    15, 30, 27		# add round key
+	vaddudm 30, 30, 31
+	vxor    16, 30, 27
+	vaddudm 30, 30, 31
+	vxor    17, 30, 27
+	vaddudm 30, 30, 31
+	vxor    18, 30, 27
+	vaddudm 30, 30, 31
+	vxor    19, 30, 27
+	vaddudm 30, 30, 31
+	vxor    20, 30, 27
+	vaddudm 30, 30, 31
+	vxor    21, 30, 27
+	vaddudm 30, 30, 31
+	vxor    22, 30, 27
+
+	addi    12, 12, -128
+	addi    11, 11, 128
+
+	bdnz	Loop_8x_block
+
+	vmr	30, 29
+	stxvb16x 30+32, 0, 7		# update IV
+
+Loop_last_block:
+	cmpdi   12, 0
+	beq     aes_gcm_out
+
+	# loop last few blocks
+	li      10, 16
+	divdu   10, 12, 10
+
+	mtctr   10
+
+	lwz	10, 240(6)
+
+	cmpdi   12, 16
+	blt     Final_block
+
+Next_rem_block:
+	lxvb16x 15, 0, 14		# load block
+
+	Loop_aes_middle_1x
+
+	xxlor	23+32, 10, 10
+
+	cmpdi	10, 10
+	beq	Do_next_1x
+
+	# 192 bits
+	xxlor	24+32, 11, 11
+
+	vcipher	15, 15, 23
+	vcipher	15, 15, 24
+
+	xxlor	23+32, 12, 12
+
+	cmpdi	10, 12
+	beq	Do_next_1x
+
+	# 256 bits
+	xxlor	24+32, 13, 13
+
+	vcipher	15, 15, 23
+	vcipher	15, 15, 24
+
+	xxlor	23+32, 14, 14
+
+	cmpdi	10, 14
+	beq	Do_next_1x
+
+Do_next_1x:
+	vcipherlast     15, 15, 23
+
+	xxlxor		47, 47, 15
+	stxvb16x	47, 0, 9	# store output
+	addi		14, 14, 16
+	addi		9, 9, 16
+
+	vmr		28, 15
+	ppc_update_hash_1x
+
+	addi		12, 12, -16
+	addi		11, 11, 16
+	xxlor		19+32, 0, 0
+	vaddudm		30, 30, 31		# IV + counter
+	vxor		15, 30, 19		# add round key
+
+	bdnz	Next_rem_block
+
+	li	15, 0
+	std	15, 56(7)		# clear partial?
+	stxvb16x 30+32, 0, 7		# update IV
+	cmpdi	12, 0
+	beq	aes_gcm_out
+
+Final_block:
+	lwz	10, 240(6)
+	Loop_aes_middle_1x
+
+	xxlor	23+32, 10, 10
+
+	cmpdi	10, 10
+	beq	Do_final_1x
+
+	# 192 bits
+	xxlor	24+32, 11, 11
+
+	vcipher	15, 15, 23
+	vcipher	15, 15, 24
+
+	xxlor	23+32, 12, 12
+
+	cmpdi	10, 12
+	beq	Do_final_1x
+
+	# 256 bits
+	xxlor	24+32, 13, 13
+
+	vcipher	15, 15, 23
+	vcipher	15, 15, 24
+
+	xxlor	23+32, 14, 14
+
+	cmpdi	10, 14
+	beq	Do_final_1x
+
+Do_final_1x:
+	vcipherlast     15, 15, 23
+
+	# check partial block
+	li	21, 0			# encrypt
+	ld	15, 56(7)		# partial?
+	cmpdi	15, 0
+	beq	Normal_block
+	bl	Do_partial_block
+
+	cmpdi	12, 0
+	ble aes_gcm_out
+
+	b Continue_partial_check
+
+Normal_block:
+	lxvb16x	15, 0, 14		# load last block
+	xxlxor	47, 47, 15
+
+	# create partial block mask
+	li	15, 16
+	sub	15, 15, 12		# index to the mask
+
+	vspltisb	16, -1		# first 16 bytes - 0xffff...ff
+	vspltisb	17, 0		# second 16 bytes - 0x0000...00
+	li	10, 192
+	stvx	16, 10, 1
+	addi	10, 10, 16
+	stvx	17, 10, 1
+
+	addi	10, 1, 192
+	lxvb16x	16, 15, 10		# load partial block mask
+	xxland	47, 47, 16
+
+	vmr	28, 15
+	ppc_update_hash_1x
+
+	# * should store only the remaining bytes.
+	bl	Write_partial_block
+
+	stxvb16x 30+32, 0, 7		# update IV
+	std	12, 56(7)		# update partial?
+	li	16, 16
+
+	stxvb16x	32, 0, 8		# write out Xi
+	stxvb16x	32, 16, 8		# write out Xi
+	b aes_gcm_out
+
+ #
+ # Compute data mask
+ #
+.macro GEN_MASK _mask _start _end
+	vspltisb	16, -1		# first 16 bytes - 0xffff...ff
+	vspltisb	17, 0		# second 16 bytes - 0x0000...00
+	li	10, 192
+	stxvb16x	17+32, 10, 1
+	add	10, 10, \_start
+	stxvb16x	16+32, 10, 1
+	add	10, 10, \_end
+	stxvb16x	17+32, 10, 1
+
+	addi	10, 1, 192
+	lxvb16x	\_mask, 0, 10		# load partial block mask
+.endm
+
+ #
+ # Handle multiple partial blocks for encrypt and decrypt
+ #   operations.
+ #
+SYM_FUNC_START_LOCAL(Do_partial_block)
+	add	17, 15, 5
+	cmpdi	17, 16
+	bgt	Big_block
+	GEN_MASK 18, 15, 5
+	b	_Partial
+SYM_FUNC_END(Do_partial_block)
+Big_block:
+	li	16, 16
+	GEN_MASK 18, 15, 16
+
+_Partial:
+	lxvb16x	17+32, 0, 14		# load last block
+	sldi	16, 15, 3
+	mtvsrdd	32+16, 0, 16
+	vsro	17, 17, 16
+	xxlxor	47, 47, 17+32
+	xxland	47, 47, 18
+
+	vxor	0, 0, 0			# clear Xi
+	vmr	28, 15
+
+	cmpdi	21, 0			# encrypt/decrypt ops?
+	beq	Skip_decrypt
+	xxland	32+28, 32+17, 18
+
+Skip_decrypt:
+
+	ppc_update_hash_1x
+
+	li	16, 16
+	lxvb16x 32+29, 16, 8
+	vxor	0, 0, 29
+	stxvb16x 32, 0, 8		# save Xi
+	stxvb16x 32, 16, 8		# save Xi
+
+	# store partial block
+	# loop the rest of the stream if any
+	sldi	16, 15, 3
+	mtvsrdd	32+16, 0, 16
+	vslo	15, 15, 16
+	#stxvb16x 15+32, 0, 9		# last block
+
+	li	16, 16
+	sub	17, 16, 15		# 16 - partial
+
+	add	16, 15, 5
+	cmpdi	16, 16
+	bgt	Larger_16
+	mr	17, 5
+Larger_16:
+
+	# write partial
+	li		10, 192
+	stxvb16x	15+32, 10, 1	# save current block
+
+	addi		10, 9, -1
+	addi		16, 1, 191
+	mtctr		17		# move partial byte count
+
+Write_last_partial:
+        lbzu		18, 1(16)
+	stbu		18, 1(10)
+        bdnz		Write_last_partial
+	# Complete loop partial
+
+	add	14, 14, 17
+	add	9, 9, 17
+	sub	12, 12, 17
+	add	11, 11, 17
+
+	add	15, 15, 5
+	cmpdi	15, 16
+	blt	Save_partial
+
+	vaddudm	30, 30, 31
+	stxvb16x 30+32, 0, 7		# update IV
+	xxlor	32+29, 0, 0
+	vxor	15, 30, 29		# IV + round key - add round key 0
+	li	15, 0
+	std	15, 56(7)		# partial done - clear
+	b	Partial_done
+Save_partial:
+	std	15, 56(7)		# partial
+
+Partial_done:
+	blr
+
+ #
+ # Write partial block
+ # r9 - output
+ # r12 - remaining bytes
+ # v15 - partial input data
+ #
+SYM_FUNC_START_LOCAL(Write_partial_block)
+	li		10, 192
+	stxvb16x	15+32, 10, 1		# last block
+
+	addi		10, 9, -1
+	addi		16, 1, 191
+
+        mtctr		12			# remaining bytes
+	li		15, 0
+
+Write_last_byte:
+        lbzu		14, 1(16)
+	stbu		14, 1(10)
+        bdnz		Write_last_byte
+	blr
+SYM_FUNC_END(Write_partial_block)
+
+aes_gcm_out:
+	# out = state
+	stxvb16x	32, 0, 8		# write out Xi
+	add	3, 11, 12		# return count
+
+	RESTORE_REGS
+	blr
+
+ #
+ # 8x Decrypt
+ #
+_GLOBAL(aes_p10_gcm_decrypt)
+.align 5
+
+	SAVE_REGS
+
+	LOAD_HASH_TABLE
+
+	# initialize ICB: GHASH( IV ), IV - r7
+	lxvb16x	30+32, 0, 7	# load IV  - v30
+
+	mr	12, 5		# length
+	li	11, 0		# block index
+
+	# counter 1
+	vxor	31, 31, 31
+	vspltisb 22, 1
+	vsldoi	31, 31, 22,1	# counter 1
+
+	# load round key to VSR
+	lxv	0, 0(6)
+	lxv	1, 0x10(6)
+	lxv	2, 0x20(6)
+	lxv	3, 0x30(6)
+	lxv	4, 0x40(6)
+	lxv	5, 0x50(6)
+	lxv	6, 0x60(6)
+	lxv	7, 0x70(6)
+	lxv	8, 0x80(6)
+	lxv	9, 0x90(6)
+	lxv	10, 0xa0(6)
+
+	# load rounds - 10 (128), 12 (192), 14 (256)
+	lwz	9,240(6)
+
+	#
+	# vxor	state, state, w # addroundkey
+	xxlor	32+29, 0, 0
+	vxor	15, 30, 29	# IV + round key - add round key 0
+
+	cmpdi	9, 10
+	beq	Loop_aes_gcm_8x_dec
+
+	# load 2 more round keys (v11, v12)
+	lxv	11, 0xb0(6)
+	lxv	12, 0xc0(6)
+
+	cmpdi	9, 12
+	beq	Loop_aes_gcm_8x_dec
+
+	# load 2 more round keys (v11, v12, v13, v14)
+	lxv	13, 0xd0(6)
+	lxv	14, 0xe0(6)
+	cmpdi	9, 14
+	beq	Loop_aes_gcm_8x_dec
+
+	b	aes_gcm_out
+
+.align 5
+Loop_aes_gcm_8x_dec:
+	mr	14, 3
+	mr	9, 4
+
+	#
+	# check partial block
+	#
+Continue_partial_check_dec:
+	ld	15, 56(7)
+	cmpdi	15, 0
+	beq	Continue_dec
+	bgt	Final_block_dec
+	cmpdi	15, 16
+	blt	Final_block_dec
+
+Continue_dec:
+	# n blcoks
+	li	10, 128
+	divdu	10, 12, 10	# n 128 bytes-blocks
+	cmpdi	10, 0
+	beq	Loop_last_block_dec
+
+	vaddudm	30, 30, 31	# IV + counter
+	vxor	16, 30, 29
+	vaddudm	30, 30, 31
+	vxor	17, 30, 29
+	vaddudm	30, 30, 31
+	vxor	18, 30, 29
+	vaddudm	30, 30, 31
+	vxor	19, 30, 29
+	vaddudm	30, 30, 31
+	vxor	20, 30, 29
+	vaddudm	30, 30, 31
+	vxor	21, 30, 29
+	vaddudm	30, 30, 31
+	vxor	22, 30, 29
+
+	mtctr	10
+
+	li	15, 16
+	li	16, 32
+	li	17, 48
+	li	18, 64
+	li	19, 80
+	li	20, 96
+	li	21, 112
+
+	lwz	10, 240(6)
+
+Loop_8x_block_dec:
+
+	lxvb16x		15, 0, 14	# load block
+	lxvb16x		16, 15, 14	# load block
+	lxvb16x		17, 16, 14	# load block
+	lxvb16x		18, 17, 14	# load block
+	lxvb16x		19, 18, 14	# load block
+	lxvb16x		20, 19, 14	# load block
+	lxvb16x		21, 20, 14	# load block
+	lxvb16x		22, 21, 14	# load block
+	addi		14, 14, 128
+
+	Loop_aes_middle8x
+
+	xxlor	23+32, 10, 10
+
+	cmpdi	10, 10
+	beq	Do_next_ghash_dec
+
+	# 192 bits
+	xxlor	24+32, 11, 11
+
+	vcipher	15, 15, 23
+	vcipher	16, 16, 23
+	vcipher	17, 17, 23
+	vcipher	18, 18, 23
+	vcipher	19, 19, 23
+	vcipher	20, 20, 23
+	vcipher	21, 21, 23
+	vcipher	22, 22, 23
+
+	vcipher	15, 15, 24
+	vcipher	16, 16, 24
+	vcipher	17, 17, 24
+	vcipher	18, 18, 24
+	vcipher	19, 19, 24
+	vcipher	20, 20, 24
+	vcipher	21, 21, 24
+	vcipher	22, 22, 24
+
+	xxlor	23+32, 12, 12
+
+	cmpdi	10, 12
+	beq	Do_next_ghash_dec
+
+	# 256 bits
+	xxlor	24+32, 13, 13
+
+	vcipher	15, 15, 23
+	vcipher	16, 16, 23
+	vcipher	17, 17, 23
+	vcipher	18, 18, 23
+	vcipher	19, 19, 23
+	vcipher	20, 20, 23
+	vcipher	21, 21, 23
+	vcipher	22, 22, 23
+
+	vcipher	15, 15, 24
+	vcipher	16, 16, 24
+	vcipher	17, 17, 24
+	vcipher	18, 18, 24
+	vcipher	19, 19, 24
+	vcipher	20, 20, 24
+	vcipher	21, 21, 24
+	vcipher	22, 22, 24
+
+	xxlor	23+32, 14, 14
+
+	cmpdi	10, 14
+	beq	Do_next_ghash_dec
+	b	aes_gcm_out
+
+Do_next_ghash_dec:
+
+	#
+	# last round
+	vcipherlast     15, 15, 23
+	vcipherlast     16, 16, 23
+
+	xxlxor		47, 47, 15
+	stxvb16x        47, 0, 9	# store output
+	xxlxor		48, 48, 16
+	stxvb16x        48, 15, 9	# store output
+
+	vcipherlast     17, 17, 23
+	vcipherlast     18, 18, 23
+
+	xxlxor		49, 49, 17
+	stxvb16x        49, 16, 9	# store output
+	xxlxor		50, 50, 18
+	stxvb16x        50, 17, 9	# store output
+
+	vcipherlast     19, 19, 23
+	vcipherlast     20, 20, 23
+
+	xxlxor		51, 51, 19
+	stxvb16x        51, 18, 9	# store output
+	xxlxor		52, 52, 20
+	stxvb16x        52, 19, 9	# store output
+
+	vcipherlast     21, 21, 23
+	vcipherlast     22, 22, 23
+
+	xxlxor		53, 53, 21
+	stxvb16x        53, 20, 9	# store output
+	xxlxor		54, 54, 22
+	stxvb16x        54, 21, 9	# store output
+
+	addi		9, 9, 128
+
+	xxlor           15+32, 15, 15
+	xxlor           16+32, 16, 16
+	xxlor           17+32, 17, 17
+	xxlor           18+32, 18, 18
+	xxlor           19+32, 19, 19
+	xxlor           20+32, 20, 20
+	xxlor           21+32, 21, 21
+	xxlor           22+32, 22, 22
+
+	# ghash here
+	ppc_aes_gcm_ghash2_4x
+
+	xxlor	27+32, 0, 0
+	vaddudm 30, 30, 31		# IV + counter
+	vmr	29, 30
+	vxor    15, 30, 27		# add round key
+	vaddudm 30, 30, 31
+	vxor    16, 30, 27
+	vaddudm 30, 30, 31
+	vxor    17, 30, 27
+	vaddudm 30, 30, 31
+	vxor    18, 30, 27
+	vaddudm 30, 30, 31
+	vxor    19, 30, 27
+	vaddudm 30, 30, 31
+	vxor    20, 30, 27
+	vaddudm 30, 30, 31
+	vxor    21, 30, 27
+	vaddudm 30, 30, 31
+	vxor    22, 30, 27
+
+	addi    12, 12, -128
+	addi    11, 11, 128
+
+	bdnz	Loop_8x_block_dec
+
+	vmr	30, 29
+	stxvb16x 30+32, 0, 7		# update IV
+
+Loop_last_block_dec:
+	cmpdi   12, 0
+	beq     aes_gcm_out
+
+	# loop last few blocks
+	li      10, 16
+	divdu   10, 12, 10
+
+	mtctr   10
+
+	lwz	10, 240(6)
+
+	cmpdi   12, 16
+	blt     Final_block_dec
+
+Next_rem_block_dec:
+	lxvb16x 15, 0, 14		# load block
+
+	Loop_aes_middle_1x
+
+	xxlor	23+32, 10, 10
+
+	cmpdi	10, 10
+	beq	Do_next_1x_dec
+
+	# 192 bits
+	xxlor	24+32, 11, 11
+
+	vcipher	15, 15, 23
+	vcipher	15, 15, 24
+
+	xxlor	23+32, 12, 12
+
+	cmpdi	10, 12
+	beq	Do_next_1x_dec
+
+	# 256 bits
+	xxlor	24+32, 13, 13
+
+	vcipher	15, 15, 23
+	vcipher	15, 15, 24
+
+	xxlor	23+32, 14, 14
+
+	cmpdi	10, 14
+	beq	Do_next_1x_dec
+
+Do_next_1x_dec:
+	vcipherlast     15, 15, 23
+
+	xxlxor		47, 47, 15
+	stxvb16x	47, 0, 9	# store output
+	addi		14, 14, 16
+	addi		9, 9, 16
+
+	xxlor           28+32, 15, 15
+	#vmr		28, 15
+	ppc_update_hash_1x
+
+	addi		12, 12, -16
+	addi		11, 11, 16
+	xxlor		19+32, 0, 0
+	vaddudm		30, 30, 31		# IV + counter
+	vxor		15, 30, 19		# add round key
+
+	bdnz	Next_rem_block_dec
+
+	li	15, 0
+	std	15, 56(7)		# clear partial?
+	stxvb16x 30+32, 0, 7		# update IV
+	cmpdi	12, 0
+	beq	aes_gcm_out
+
+Final_block_dec:
+	lwz	10, 240(6)
+	Loop_aes_middle_1x
+
+	xxlor	23+32, 10, 10
+
+	cmpdi	10, 10
+	beq	Do_final_1x_dec
+
+	# 192 bits
+	xxlor	24+32, 11, 11
+
+	vcipher	15, 15, 23
+	vcipher	15, 15, 24
+
+	xxlor	23+32, 12, 12
+
+	cmpdi	10, 12
+	beq	Do_final_1x_dec
+
+	# 256 bits
+	xxlor	24+32, 13, 13
+
+	vcipher	15, 15, 23
+	vcipher	15, 15, 24
+
+	xxlor	23+32, 14, 14
+
+	cmpdi	10, 14
+	beq	Do_final_1x_dec
+
+Do_final_1x_dec:
+	vcipherlast     15, 15, 23
+
+	# check partial block
+	li	21, 1			# decrypt
+	ld	15, 56(7)		# partial?
+	cmpdi	15, 0
+	beq	Normal_block_dec
+	bl	Do_partial_block
+	cmpdi	12, 0
+	ble aes_gcm_out
+
+	b Continue_partial_check_dec
+
+Normal_block_dec:
+	lxvb16x	15, 0, 14		# load last block
+	xxlxor	47, 47, 15
+
+	# create partial block mask
+	li	15, 16
+	sub	15, 15, 12		# index to the mask
+
+	vspltisb	16, -1		# first 16 bytes - 0xffff...ff
+	vspltisb	17, 0		# second 16 bytes - 0x0000...00
+	li	10, 192
+	stvx	16, 10, 1
+	addi	10, 10, 16
+	stvx	17, 10, 1
+
+	addi	10, 1, 192
+	lxvb16x	16, 15, 10		# load partial block mask
+	xxland	47, 47, 16
+
+	xxland	32+28, 15, 16
+	#vmr	28, 15
+	ppc_update_hash_1x
+
+	# * should store only the remaining bytes.
+	bl	Write_partial_block
+
+	stxvb16x 30+32, 0, 7		# update IV
+	std	12, 56(7)		# update partial?
+	li	16, 16
+
+	stxvb16x	32, 0, 8		# write out Xi
+	stxvb16x	32, 16, 8		# write out Xi
+	b aes_gcm_out
diff --git a/arch/powerpc/crypto/aesp8-ppc.pl b/arch/powerpc/crypto/aesp8-ppc.pl
new file mode 100644
index 000000000000..1f22aec27d79
--- /dev/null
+++ b/arch/powerpc/crypto/aesp8-ppc.pl
@@ -0,0 +1,585 @@
+#! /usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+
+# This code is taken from CRYPTOGAMs[1] and is included here using the option
+# in the license to distribute the code under the GPL. Therefore this program
+# is free software; you can redistribute it and/or modify it under the terms of
+# the GNU General Public License version 2 as published by the Free Software
+# Foundation.
+#
+# [1] https://www.openssl.org/~appro/cryptogams/
+
+# Copyright (c) 2006-2017, CRYPTOGAMS by <appro@openssl.org>
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+#       * Redistributions of source code must retain copyright notices,
+#         this list of conditions and the following disclaimer.
+#
+#       * Redistributions in binary form must reproduce the above
+#         copyright notice, this list of conditions and the following
+#         disclaimer in the documentation and/or other materials
+#         provided with the distribution.
+#
+#       * Neither the name of the CRYPTOGAMS nor the names of its
+#         copyright holder and contributors may be used to endorse or
+#         promote products derived from this software without specific
+#         prior written permission.
+#
+# ALTERNATIVELY, provided that this notice is retained in full, this
+# product may be distributed under the terms of the GNU General Public
+# License (GPL), in which case the provisions of the GPL apply INSTEAD OF
+# those given above.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see https://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# This module implements support for AES instructions as per PowerISA
+# specification version 2.07, first implemented by POWER8 processor.
+# The module is endian-agnostic in sense that it supports both big-
+# and little-endian cases. Data alignment in parallelizable modes is
+# handled with VSX loads and stores, which implies MSR.VSX flag being
+# set. It should also be noted that ISA specification doesn't prohibit
+# alignment exceptions for these instructions on page boundaries.
+# Initially alignment was handled in pure AltiVec/VMX way [when data
+# is aligned programmatically, which in turn guarantees exception-
+# free execution], but it turned to hamper performance when vcipher
+# instructions are interleaved. It's reckoned that eventual
+# misalignment penalties at page boundaries are in average lower
+# than additional overhead in pure AltiVec approach.
+#
+# May 2016
+#
+# Add XTS subroutine, 9x on little- and 12x improvement on big-endian
+# systems were measured.
+#
+######################################################################
+# Current large-block performance in cycles per byte processed with
+# 128-bit key (less is better).
+#
+#		CBC en-/decrypt	CTR	XTS
+# POWER8[le]	3.96/0.72	0.74	1.1
+# POWER8[be]	3.75/0.65	0.66	1.0
+
+$flavour = shift;
+
+if ($flavour =~ /64/) {
+	$SIZE_T	=8;
+	$LRSAVE	=2*$SIZE_T;
+	$STU	="stdu";
+	$POP	="ld";
+	$PUSH	="std";
+	$UCMP	="cmpld";
+	$SHL	="sldi";
+} elsif ($flavour =~ /32/) {
+	$SIZE_T	=4;
+	$LRSAVE	=$SIZE_T;
+	$STU	="stwu";
+	$POP	="lwz";
+	$PUSH	="stw";
+	$UCMP	="cmplw";
+	$SHL	="slwi";
+} else { die "nonsense $flavour"; }
+
+$LITTLE_ENDIAN = ($flavour=~/le$/) ? $SIZE_T : 0;
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+
+$FRAME=8*$SIZE_T;
+$prefix="aes_p8";
+
+$sp="r1";
+$vrsave="r12";
+
+#########################################################################
+{{{	# Key setup procedures						#
+my ($inp,$bits,$out,$ptr,$cnt,$rounds)=map("r$_",(3..8));
+my ($zero,$in0,$in1,$key,$rcon,$mask,$tmp)=map("v$_",(0..6));
+my ($stage,$outperm,$outmask,$outhead,$outtail)=map("v$_",(7..11));
+
+$code.=<<___;
+.machine	"any"
+
+.text
+
+.align	7
+rcon:
+.long	0x01000000, 0x01000000, 0x01000000, 0x01000000	?rev
+.long	0x1b000000, 0x1b000000, 0x1b000000, 0x1b000000	?rev
+.long	0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c	?rev
+.long	0,0,0,0						?asis
+Lconsts:
+	mflr	r0
+	bcl	20,31,\$+4
+	mflr	$ptr	 #vvvvv "distance between . and rcon
+	addi	$ptr,$ptr,-0x48
+	mtlr	r0
+	blr
+	.long	0
+	.byte	0,12,0x14,0,0,0,0,0
+.asciz	"AES for PowerISA 2.07, CRYPTOGAMS by <appro\@openssl.org>"
+
+.globl	.${prefix}_set_encrypt_key
+Lset_encrypt_key:
+	mflr		r11
+	$PUSH		r11,$LRSAVE($sp)
+
+	li		$ptr,-1
+	${UCMP}i	$inp,0
+	beq-		Lenc_key_abort		# if ($inp==0) return -1;
+	${UCMP}i	$out,0
+	beq-		Lenc_key_abort		# if ($out==0) return -1;
+	li		$ptr,-2
+	cmpwi		$bits,128
+	blt-		Lenc_key_abort
+	cmpwi		$bits,256
+	bgt-		Lenc_key_abort
+	andi.		r0,$bits,0x3f
+	bne-		Lenc_key_abort
+
+	lis		r0,0xfff0
+	mfspr		$vrsave,256
+	mtspr		256,r0
+
+	bl		Lconsts
+	mtlr		r11
+
+	neg		r9,$inp
+	lvx		$in0,0,$inp
+	addi		$inp,$inp,15		# 15 is not typo
+	lvsr		$key,0,r9		# borrow $key
+	li		r8,0x20
+	cmpwi		$bits,192
+	lvx		$in1,0,$inp
+	le?vspltisb	$mask,0x0f		# borrow $mask
+	lvx		$rcon,0,$ptr
+	le?vxor		$key,$key,$mask		# adjust for byte swap
+	lvx		$mask,r8,$ptr
+	addi		$ptr,$ptr,0x10
+	vperm		$in0,$in0,$in1,$key	# align [and byte swap in LE]
+	li		$cnt,8
+	vxor		$zero,$zero,$zero
+	mtctr		$cnt
+
+	?lvsr		$outperm,0,$out
+	vspltisb	$outmask,-1
+	lvx		$outhead,0,$out
+	?vperm		$outmask,$zero,$outmask,$outperm
+
+	blt		Loop128
+	addi		$inp,$inp,8
+	beq		L192
+	addi		$inp,$inp,8
+	b		L256
+
+.align	4
+Loop128:
+	vperm		$key,$in0,$in0,$mask	# rotate-n-splat
+	vsldoi		$tmp,$zero,$in0,12	# >>32
+	 vperm		$outtail,$in0,$in0,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	vcipherlast	$key,$key,$rcon
+	 stvx		$stage,0,$out
+	 addi		$out,$out,16
+
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+	 vadduwm	$rcon,$rcon,$rcon
+	vxor		$in0,$in0,$key
+	bdnz		Loop128
+
+	lvx		$rcon,0,$ptr		# last two round keys
+
+	vperm		$key,$in0,$in0,$mask	# rotate-n-splat
+	vsldoi		$tmp,$zero,$in0,12	# >>32
+	 vperm		$outtail,$in0,$in0,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	vcipherlast	$key,$key,$rcon
+	 stvx		$stage,0,$out
+	 addi		$out,$out,16
+
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+	 vadduwm	$rcon,$rcon,$rcon
+	vxor		$in0,$in0,$key
+
+	vperm		$key,$in0,$in0,$mask	# rotate-n-splat
+	vsldoi		$tmp,$zero,$in0,12	# >>32
+	 vperm		$outtail,$in0,$in0,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	vcipherlast	$key,$key,$rcon
+	 stvx		$stage,0,$out
+	 addi		$out,$out,16
+
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+	vxor		$in0,$in0,$key
+	 vperm		$outtail,$in0,$in0,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	 stvx		$stage,0,$out
+
+	addi		$inp,$out,15		# 15 is not typo
+	addi		$out,$out,0x50
+
+	li		$rounds,10
+	b		Ldone
+
+.align	4
+L192:
+	lvx		$tmp,0,$inp
+	li		$cnt,4
+	 vperm		$outtail,$in0,$in0,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	 stvx		$stage,0,$out
+	 addi		$out,$out,16
+	vperm		$in1,$in1,$tmp,$key	# align [and byte swap in LE]
+	vspltisb	$key,8			# borrow $key
+	mtctr		$cnt
+	vsububm		$mask,$mask,$key	# adjust the mask
+
+Loop192:
+	vperm		$key,$in1,$in1,$mask	# roate-n-splat
+	vsldoi		$tmp,$zero,$in0,12	# >>32
+	vcipherlast	$key,$key,$rcon
+
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+
+	 vsldoi		$stage,$zero,$in1,8
+	vspltw		$tmp,$in0,3
+	vxor		$tmp,$tmp,$in1
+	vsldoi		$in1,$zero,$in1,12	# >>32
+	 vadduwm	$rcon,$rcon,$rcon
+	vxor		$in1,$in1,$tmp
+	vxor		$in0,$in0,$key
+	vxor		$in1,$in1,$key
+	 vsldoi		$stage,$stage,$in0,8
+
+	vperm		$key,$in1,$in1,$mask	# rotate-n-splat
+	vsldoi		$tmp,$zero,$in0,12	# >>32
+	 vperm		$outtail,$stage,$stage,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	vcipherlast	$key,$key,$rcon
+	 stvx		$stage,0,$out
+	 addi		$out,$out,16
+
+	 vsldoi		$stage,$in0,$in1,8
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	 vperm		$outtail,$stage,$stage,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+	 stvx		$stage,0,$out
+	 addi		$out,$out,16
+
+	vspltw		$tmp,$in0,3
+	vxor		$tmp,$tmp,$in1
+	vsldoi		$in1,$zero,$in1,12	# >>32
+	 vadduwm	$rcon,$rcon,$rcon
+	vxor		$in1,$in1,$tmp
+	vxor		$in0,$in0,$key
+	vxor		$in1,$in1,$key
+	 vperm		$outtail,$in0,$in0,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	 stvx		$stage,0,$out
+	 addi		$inp,$out,15		# 15 is not typo
+	 addi		$out,$out,16
+	bdnz		Loop192
+
+	li		$rounds,12
+	addi		$out,$out,0x20
+	b		Ldone
+
+.align	4
+L256:
+	lvx		$tmp,0,$inp
+	li		$cnt,7
+	li		$rounds,14
+	 vperm		$outtail,$in0,$in0,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	 stvx		$stage,0,$out
+	 addi		$out,$out,16
+	vperm		$in1,$in1,$tmp,$key	# align [and byte swap in LE]
+	mtctr		$cnt
+
+Loop256:
+	vperm		$key,$in1,$in1,$mask	# rotate-n-splat
+	vsldoi		$tmp,$zero,$in0,12	# >>32
+	 vperm		$outtail,$in1,$in1,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	vcipherlast	$key,$key,$rcon
+	 stvx		$stage,0,$out
+	 addi		$out,$out,16
+
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in0,$in0,$tmp
+	 vadduwm	$rcon,$rcon,$rcon
+	vxor		$in0,$in0,$key
+	 vperm		$outtail,$in0,$in0,$outperm	# rotate
+	 vsel		$stage,$outhead,$outtail,$outmask
+	 vmr		$outhead,$outtail
+	 stvx		$stage,0,$out
+	 addi		$inp,$out,15		# 15 is not typo
+	 addi		$out,$out,16
+	bdz		Ldone
+
+	vspltw		$key,$in0,3		# just splat
+	vsldoi		$tmp,$zero,$in1,12	# >>32
+	vsbox		$key,$key
+
+	vxor		$in1,$in1,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in1,$in1,$tmp
+	vsldoi		$tmp,$zero,$tmp,12	# >>32
+	vxor		$in1,$in1,$tmp
+
+	vxor		$in1,$in1,$key
+	b		Loop256
+
+.align	4
+Ldone:
+	lvx		$in1,0,$inp		# redundant in aligned case
+	vsel		$in1,$outhead,$in1,$outmask
+	stvx		$in1,0,$inp
+	li		$ptr,0
+	mtspr		256,$vrsave
+	stw		$rounds,0($out)
+
+Lenc_key_abort:
+	mr		r3,$ptr
+	blr
+	.long		0
+	.byte		0,12,0x14,1,0,0,3,0
+	.long		0
+.size	.${prefix}_set_encrypt_key,.-.${prefix}_set_encrypt_key
+
+.globl	.${prefix}_set_decrypt_key
+	$STU		$sp,-$FRAME($sp)
+	mflr		r10
+	$PUSH		r10,$FRAME+$LRSAVE($sp)
+	bl		Lset_encrypt_key
+	mtlr		r10
+
+	cmpwi		r3,0
+	bne-		Ldec_key_abort
+
+	slwi		$cnt,$rounds,4
+	subi		$inp,$out,240		# first round key
+	srwi		$rounds,$rounds,1
+	add		$out,$inp,$cnt		# last round key
+	mtctr		$rounds
+
+Ldeckey:
+	lwz		r0, 0($inp)
+	lwz		r6, 4($inp)
+	lwz		r7, 8($inp)
+	lwz		r8, 12($inp)
+	addi		$inp,$inp,16
+	lwz		r9, 0($out)
+	lwz		r10,4($out)
+	lwz		r11,8($out)
+	lwz		r12,12($out)
+	stw		r0, 0($out)
+	stw		r6, 4($out)
+	stw		r7, 8($out)
+	stw		r8, 12($out)
+	subi		$out,$out,16
+	stw		r9, -16($inp)
+	stw		r10,-12($inp)
+	stw		r11,-8($inp)
+	stw		r12,-4($inp)
+	bdnz		Ldeckey
+
+	xor		r3,r3,r3		# return value
+Ldec_key_abort:
+	addi		$sp,$sp,$FRAME
+	blr
+	.long		0
+	.byte		0,12,4,1,0x80,0,3,0
+	.long		0
+.size	.${prefix}_set_decrypt_key,.-.${prefix}_set_decrypt_key
+___
+}}}
+#########################################################################
+{{{	# Single block en- and decrypt procedures			#
+sub gen_block () {
+my $dir = shift;
+my $n   = $dir eq "de" ? "n" : "";
+my ($inp,$out,$key,$rounds,$idx)=map("r$_",(3..7));
+
+$code.=<<___;
+.globl	.${prefix}_${dir}crypt
+	lwz		$rounds,240($key)
+	lis		r0,0xfc00
+	mfspr		$vrsave,256
+	li		$idx,15			# 15 is not typo
+	mtspr		256,r0
+
+	lvx		v0,0,$inp
+	neg		r11,$out
+	lvx		v1,$idx,$inp
+	lvsl		v2,0,$inp		# inpperm
+	le?vspltisb	v4,0x0f
+	?lvsl		v3,0,r11		# outperm
+	le?vxor		v2,v2,v4
+	li		$idx,16
+	vperm		v0,v0,v1,v2		# align [and byte swap in LE]
+	lvx		v1,0,$key
+	?lvsl		v5,0,$key		# keyperm
+	srwi		$rounds,$rounds,1
+	lvx		v2,$idx,$key
+	addi		$idx,$idx,16
+	subi		$rounds,$rounds,1
+	?vperm		v1,v1,v2,v5		# align round key
+
+	vxor		v0,v0,v1
+	lvx		v1,$idx,$key
+	addi		$idx,$idx,16
+	mtctr		$rounds
+
+Loop_${dir}c:
+	?vperm		v2,v2,v1,v5
+	v${n}cipher	v0,v0,v2
+	lvx		v2,$idx,$key
+	addi		$idx,$idx,16
+	?vperm		v1,v1,v2,v5
+	v${n}cipher	v0,v0,v1
+	lvx		v1,$idx,$key
+	addi		$idx,$idx,16
+	bdnz		Loop_${dir}c
+
+	?vperm		v2,v2,v1,v5
+	v${n}cipher	v0,v0,v2
+	lvx		v2,$idx,$key
+	?vperm		v1,v1,v2,v5
+	v${n}cipherlast	v0,v0,v1
+
+	vspltisb	v2,-1
+	vxor		v1,v1,v1
+	li		$idx,15			# 15 is not typo
+	?vperm		v2,v1,v2,v3		# outmask
+	le?vxor		v3,v3,v4
+	lvx		v1,0,$out		# outhead
+	vperm		v0,v0,v0,v3		# rotate [and byte swap in LE]
+	vsel		v1,v1,v0,v2
+	lvx		v4,$idx,$out
+	stvx		v1,0,$out
+	vsel		v0,v0,v4,v2
+	stvx		v0,$idx,$out
+
+	mtspr		256,$vrsave
+	blr
+	.long		0
+	.byte		0,12,0x14,0,0,0,3,0
+	.long		0
+.size	.${prefix}_${dir}crypt,.-.${prefix}_${dir}crypt
+___
+}
+&gen_block("en");
+&gen_block("de");
+}}}
+
+my $consts=1;
+foreach(split("\n",$code)) {
+        s/\`([^\`]*)\`/eval($1)/geo;
+
+	# constants table endian-specific conversion
+	if ($consts && m/\.(long|byte)\s+(.+)\s+(\?[a-z]*)$/o) {
+	    my $conv=$3;
+	    my @bytes=();
+
+	    # convert to endian-agnostic format
+	    if ($1 eq "long") {
+	      foreach (split(/,\s*/,$2)) {
+		my $l = /^0/?oct:int;
+		push @bytes,($l>>24)&0xff,($l>>16)&0xff,($l>>8)&0xff,$l&0xff;
+	      }
+	    } else {
+		@bytes = map(/^0/?oct:int,split(/,\s*/,$2));
+	    }
+
+	    # little-endian conversion
+	    if ($flavour =~ /le$/o) {
+		SWITCH: for($conv)  {
+		    /\?inv/ && do   { @bytes=map($_^0xf,@bytes); last; };
+		    /\?rev/ && do   { @bytes=reverse(@bytes);    last; };
+		}
+	    }
+
+	    #emit
+	    print ".byte\t",join(',',map (sprintf("0x%02x",$_),@bytes)),"\n";
+	    next;
+	}
+	$consts=0 if (m/Lconsts:/o);	# end of table
+
+	# instructions prefixed with '?' are endian-specific and need
+	# to be adjusted accordingly...
+	if ($flavour =~ /le$/o) {	# little-endian
+	    s/le\?//o		or
+	    s/be\?/#be#/o	or
+	    s/\?lvsr/lvsl/o	or
+	    s/\?lvsl/lvsr/o	or
+	    s/\?(vperm\s+v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+)/$1$3$2$4/o or
+	    s/\?(vsldoi\s+v[0-9]+,\s*)(v[0-9]+,)\s*(v[0-9]+,\s*)([0-9]+)/$1$3$2 16-$4/o or
+	    s/\?(vspltw\s+v[0-9]+,\s*)(v[0-9]+,)\s*([0-9])/$1$2 3-$3/o;
+	} else {			# big-endian
+	    s/le\?/#le#/o	or
+	    s/be\?//o		or
+	    s/\?([a-z]+)/$1/o;
+	}
+
+        print $_,"\n";
+}
+
+close STDOUT;
diff --git a/arch/powerpc/crypto/ghashp8-ppc.pl b/arch/powerpc/crypto/ghashp8-ppc.pl
new file mode 100644
index 000000000000..b56603b4a893
--- /dev/null
+++ b/arch/powerpc/crypto/ghashp8-ppc.pl
@@ -0,0 +1,370 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+
+# This code is taken from the OpenSSL project but the author (Andy Polyakov)
+# has relicensed it under the GPLv2. Therefore this program is free software;
+# you can redistribute it and/or modify it under the terms of the GNU General
+# Public License version 2 as published by the Free Software Foundation.
+#
+# The original headers, including the original license headers, are
+# included below for completeness.
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see https://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# GHASH for PowerISA v2.07.
+#
+# July 2014
+#
+# Accurate performance measurements are problematic, because it's
+# always virtualized setup with possibly throttled processor.
+# Relative comparison is therefore more informative. This initial
+# version is ~2.1x slower than hardware-assisted AES-128-CTR, ~12x
+# faster than "4-bit" integer-only compiler-generated 64-bit code.
+# "Initial version" means that there is room for futher improvement.
+
+$flavour=shift;
+$output =shift;
+
+if ($flavour =~ /64/) {
+	$SIZE_T=8;
+	$LRSAVE=2*$SIZE_T;
+	$STU="stdu";
+	$POP="ld";
+	$PUSH="std";
+} elsif ($flavour =~ /32/) {
+	$SIZE_T=4;
+	$LRSAVE=$SIZE_T;
+	$STU="stwu";
+	$POP="lwz";
+	$PUSH="stw";
+} else { die "nonsense $flavour"; }
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!";
+
+my ($Xip,$Htbl,$inp,$len)=map("r$_",(3..6));	# argument block
+
+my ($Xl,$Xm,$Xh,$IN)=map("v$_",(0..3));
+my ($zero,$t0,$t1,$t2,$xC2,$H,$Hh,$Hl,$lemask)=map("v$_",(4..12));
+my ($Xl1,$Xm1,$Xh1,$IN1,$H2,$H2h,$H2l)=map("v$_",(13..19));
+my $vrsave="r12";
+my ($t4,$t5,$t6) = ($Hl,$H,$Hh);
+
+$code=<<___;
+.machine	"any"
+
+.text
+
+.globl	.gcm_init_p8
+	lis		r0,0xfff0
+	li		r8,0x10
+	mfspr		$vrsave,256
+	li		r9,0x20
+	mtspr		256,r0
+	li		r10,0x30
+	lvx_u		$H,0,r4			# load H
+	le?xor		r7,r7,r7
+	le?addi		r7,r7,0x8		# need a vperm start with 08
+	le?lvsr		5,0,r7
+	le?vspltisb	6,0x0f
+	le?vxor		5,5,6			# set a b-endian mask
+	le?vperm	$H,$H,$H,5
+
+	vspltisb	$xC2,-16		# 0xf0
+	vspltisb	$t0,1			# one
+	vaddubm		$xC2,$xC2,$xC2		# 0xe0
+	vxor		$zero,$zero,$zero
+	vor		$xC2,$xC2,$t0		# 0xe1
+	vsldoi		$xC2,$xC2,$zero,15	# 0xe1...
+	vsldoi		$t1,$zero,$t0,1		# ...1
+	vaddubm		$xC2,$xC2,$xC2		# 0xc2...
+	vspltisb	$t2,7
+	vor		$xC2,$xC2,$t1		# 0xc2....01
+	vspltb		$t1,$H,0		# most significant byte
+	vsl		$H,$H,$t0		# H<<=1
+	vsrab		$t1,$t1,$t2		# broadcast carry bit
+	vand		$t1,$t1,$xC2
+	vxor		$H,$H,$t1		# twisted H
+
+	vsldoi		$H,$H,$H,8		# twist even more ...
+	vsldoi		$xC2,$zero,$xC2,8	# 0xc2.0
+	vsldoi		$Hl,$zero,$H,8		# ... and split
+	vsldoi		$Hh,$H,$zero,8
+
+	stvx_u		$xC2,0,r3		# save pre-computed table
+	stvx_u		$Hl,r8,r3
+	stvx_u		$H, r9,r3
+	stvx_u		$Hh,r10,r3
+
+	mtspr		256,$vrsave
+	blr
+	.long		0
+	.byte		0,12,0x14,0,0,0,2,0
+	.long		0
+.size	.gcm_init_p8,.-.gcm_init_p8
+
+.globl	.gcm_init_htable
+	lis		r0,0xfff0
+	li		r8,0x10
+	mfspr		$vrsave,256
+	li		r9,0x20
+	mtspr		256,r0
+	li		r10,0x30
+	lvx_u		$H,0,r4			# load H
+
+	vspltisb	$xC2,-16		# 0xf0
+	vspltisb	$t0,1			# one
+	vaddubm		$xC2,$xC2,$xC2		# 0xe0
+	vxor		$zero,$zero,$zero
+	vor		$xC2,$xC2,$t0		# 0xe1
+	vsldoi		$xC2,$xC2,$zero,15	# 0xe1...
+	vsldoi		$t1,$zero,$t0,1		# ...1
+	vaddubm		$xC2,$xC2,$xC2		# 0xc2...
+	vspltisb	$t2,7
+	vor		$xC2,$xC2,$t1		# 0xc2....01
+	vspltb		$t1,$H,0		# most significant byte
+	vsl		$H,$H,$t0		# H<<=1
+	vsrab		$t1,$t1,$t2		# broadcast carry bit
+	vand		$t1,$t1,$xC2
+	vxor		$IN,$H,$t1		# twisted H
+
+	vsldoi		$H,$IN,$IN,8		# twist even more ...
+	vsldoi		$xC2,$zero,$xC2,8	# 0xc2.0
+	vsldoi		$Hl,$zero,$H,8		# ... and split
+	vsldoi		$Hh,$H,$zero,8
+
+	stvx_u		$xC2,0,r3		# save pre-computed table
+	stvx_u		$Hl,r8,r3
+	li		r8,0x40
+	stvx_u		$H, r9,r3
+	li		r9,0x50
+	stvx_u		$Hh,r10,r3
+	li		r10,0x60
+
+	vpmsumd		$Xl,$IN,$Hl		# H.lo·H.lo
+	vpmsumd		$Xm,$IN,$H		# H.hi·H.lo+H.lo·H.hi
+	vpmsumd		$Xh,$IN,$Hh		# H.hi·H.hi
+
+	vpmsumd		$t2,$Xl,$xC2		# 1st reduction phase
+
+	vsldoi		$t0,$Xm,$zero,8
+	vsldoi		$t1,$zero,$Xm,8
+	vxor		$Xl,$Xl,$t0
+	vxor		$Xh,$Xh,$t1
+
+	vsldoi		$Xl,$Xl,$Xl,8
+	vxor		$Xl,$Xl,$t2
+
+	vsldoi		$t1,$Xl,$Xl,8		# 2nd reduction phase
+	vpmsumd		$Xl,$Xl,$xC2
+	vxor		$t1,$t1,$Xh
+	vxor		$IN1,$Xl,$t1
+
+	vsldoi		$H2,$IN1,$IN1,8
+	vsldoi		$H2l,$zero,$H2,8
+	vsldoi		$H2h,$H2,$zero,8
+
+	stvx_u		$H2l,r8,r3		# save H^2
+	li		r8,0x70
+	stvx_u		$H2,r9,r3
+	li		r9,0x80
+	stvx_u		$H2h,r10,r3
+	li		r10,0x90
+
+	vpmsumd		$Xl,$IN,$H2l		# H.lo·H^2.lo
+	 vpmsumd	$Xl1,$IN1,$H2l		# H^2.lo·H^2.lo
+	vpmsumd		$Xm,$IN,$H2		# H.hi·H^2.lo+H.lo·H^2.hi
+	 vpmsumd	$Xm1,$IN1,$H2		# H^2.hi·H^2.lo+H^2.lo·H^2.hi
+	vpmsumd		$Xh,$IN,$H2h		# H.hi·H^2.hi
+	 vpmsumd	$Xh1,$IN1,$H2h		# H^2.hi·H^2.hi
+
+	vpmsumd		$t2,$Xl,$xC2		# 1st reduction phase
+	 vpmsumd	$t6,$Xl1,$xC2		# 1st reduction phase
+
+	vsldoi		$t0,$Xm,$zero,8
+	vsldoi		$t1,$zero,$Xm,8
+	 vsldoi		$t4,$Xm1,$zero,8
+	 vsldoi		$t5,$zero,$Xm1,8
+	vxor		$Xl,$Xl,$t0
+	vxor		$Xh,$Xh,$t1
+	 vxor		$Xl1,$Xl1,$t4
+	 vxor		$Xh1,$Xh1,$t5
+
+	vsldoi		$Xl,$Xl,$Xl,8
+	 vsldoi		$Xl1,$Xl1,$Xl1,8
+	vxor		$Xl,$Xl,$t2
+	 vxor		$Xl1,$Xl1,$t6
+
+	vsldoi		$t1,$Xl,$Xl,8		# 2nd reduction phase
+	 vsldoi		$t5,$Xl1,$Xl1,8		# 2nd reduction phase
+	vpmsumd		$Xl,$Xl,$xC2
+	 vpmsumd	$Xl1,$Xl1,$xC2
+	vxor		$t1,$t1,$Xh
+	 vxor		$t5,$t5,$Xh1
+	vxor		$Xl,$Xl,$t1
+	 vxor		$Xl1,$Xl1,$t5
+
+	vsldoi		$H,$Xl,$Xl,8
+	 vsldoi		$H2,$Xl1,$Xl1,8
+	vsldoi		$Hl,$zero,$H,8
+	vsldoi		$Hh,$H,$zero,8
+	 vsldoi		$H2l,$zero,$H2,8
+	 vsldoi		$H2h,$H2,$zero,8
+
+	stvx_u		$Hl,r8,r3		# save H^3
+	li		r8,0xa0
+	stvx_u		$H,r9,r3
+	li		r9,0xb0
+	stvx_u		$Hh,r10,r3
+	li		r10,0xc0
+	 stvx_u		$H2l,r8,r3		# save H^4
+	 stvx_u		$H2,r9,r3
+	 stvx_u		$H2h,r10,r3
+
+	mtspr		256,$vrsave
+	blr
+	.long		0
+	.byte		0,12,0x14,0,0,0,2,0
+	.long		0
+.size	.gcm_init_htable,.-.gcm_init_htable
+
+.globl	.gcm_gmult_p8
+	lis		r0,0xfff8
+	li		r8,0x10
+	mfspr		$vrsave,256
+	li		r9,0x20
+	mtspr		256,r0
+	li		r10,0x30
+	lvx_u		$IN,0,$Xip		# load Xi
+
+	lvx_u		$Hl,r8,$Htbl		# load pre-computed table
+	 le?lvsl	$lemask,r0,r0
+	lvx_u		$H, r9,$Htbl
+	 le?vspltisb	$t0,0x07
+	lvx_u		$Hh,r10,$Htbl
+	 le?vxor	$lemask,$lemask,$t0
+	lvx_u		$xC2,0,$Htbl
+	 le?vperm	$IN,$IN,$IN,$lemask
+	vxor		$zero,$zero,$zero
+
+	vpmsumd		$Xl,$IN,$Hl		# H.lo·Xi.lo
+	vpmsumd		$Xm,$IN,$H		# H.hi·Xi.lo+H.lo·Xi.hi
+	vpmsumd		$Xh,$IN,$Hh		# H.hi·Xi.hi
+
+	vpmsumd		$t2,$Xl,$xC2		# 1st phase
+
+	vsldoi		$t0,$Xm,$zero,8
+	vsldoi		$t1,$zero,$Xm,8
+	vxor		$Xl,$Xl,$t0
+	vxor		$Xh,$Xh,$t1
+
+	vsldoi		$Xl,$Xl,$Xl,8
+	vxor		$Xl,$Xl,$t2
+
+	vsldoi		$t1,$Xl,$Xl,8		# 2nd phase
+	vpmsumd		$Xl,$Xl,$xC2
+	vxor		$t1,$t1,$Xh
+	vxor		$Xl,$Xl,$t1
+
+	le?vperm	$Xl,$Xl,$Xl,$lemask
+	stvx_u		$Xl,0,$Xip		# write out Xi
+
+	mtspr		256,$vrsave
+	blr
+	.long		0
+	.byte		0,12,0x14,0,0,0,2,0
+	.long		0
+.size	.gcm_gmult_p8,.-.gcm_gmult_p8
+
+.globl	.gcm_ghash_p8
+	lis		r0,0xfff8
+	li		r8,0x10
+	mfspr		$vrsave,256
+	li		r9,0x20
+	mtspr		256,r0
+	li		r10,0x30
+	lvx_u		$Xl,0,$Xip		# load Xi
+
+	lvx_u		$Hl,r8,$Htbl		# load pre-computed table
+	 le?lvsl	$lemask,r0,r0
+	lvx_u		$H, r9,$Htbl
+	 le?vspltisb	$t0,0x07
+	lvx_u		$Hh,r10,$Htbl
+	 le?vxor	$lemask,$lemask,$t0
+	lvx_u		$xC2,0,$Htbl
+	 le?vperm	$Xl,$Xl,$Xl,$lemask
+	vxor		$zero,$zero,$zero
+
+	lvx_u		$IN,0,$inp
+	addi		$inp,$inp,16
+	subi		$len,$len,16
+	 le?vperm	$IN,$IN,$IN,$lemask
+	vxor		$IN,$IN,$Xl
+	b		Loop
+
+.align	5
+Loop:
+	 subic		$len,$len,16
+	vpmsumd		$Xl,$IN,$Hl		# H.lo·Xi.lo
+	 subfe.		r0,r0,r0		# borrow?-1:0
+	vpmsumd		$Xm,$IN,$H		# H.hi·Xi.lo+H.lo·Xi.hi
+	 and		r0,r0,$len
+	vpmsumd		$Xh,$IN,$Hh		# H.hi·Xi.hi
+	 add		$inp,$inp,r0
+
+	vpmsumd		$t2,$Xl,$xC2		# 1st phase
+
+	vsldoi		$t0,$Xm,$zero,8
+	vsldoi		$t1,$zero,$Xm,8
+	vxor		$Xl,$Xl,$t0
+	vxor		$Xh,$Xh,$t1
+
+	vsldoi		$Xl,$Xl,$Xl,8
+	vxor		$Xl,$Xl,$t2
+	 lvx_u		$IN,0,$inp
+	 addi		$inp,$inp,16
+
+	vsldoi		$t1,$Xl,$Xl,8		# 2nd phase
+	vpmsumd		$Xl,$Xl,$xC2
+	 le?vperm	$IN,$IN,$IN,$lemask
+	vxor		$t1,$t1,$Xh
+	vxor		$IN,$IN,$t1
+	vxor		$IN,$IN,$Xl
+	beq		Loop			# did $len-=16 borrow?
+
+	vxor		$Xl,$Xl,$t1
+	le?vperm	$Xl,$Xl,$Xl,$lemask
+	stvx_u		$Xl,0,$Xip		# write out Xi
+
+	mtspr		256,$vrsave
+	blr
+	.long		0
+	.byte		0,12,0x14,0,0,0,4,0
+	.long		0
+.size	.gcm_ghash_p8,.-.gcm_ghash_p8
+
+.asciz  "GHASH for PowerISA 2.07, CRYPTOGAMS by <appro\@openssl.org>"
+.align  2
+___
+
+foreach (split("\n",$code)) {
+	if ($flavour =~ /le$/o) {	# little-endian
+	    s/le\?//o		or
+	    s/be\?/#be#/o;
+	} else {
+	    s/le\?/#le#/o	or
+	    s/be\?//o;
+	}
+	print $_,"\n";
+}
+
+close STDOUT; # enforce flush
diff --git a/arch/powerpc/crypto/ppc-xlate.pl b/arch/powerpc/crypto/ppc-xlate.pl
new file mode 100644
index 000000000000..23cca703ce29
--- /dev/null
+++ b/arch/powerpc/crypto/ppc-xlate.pl
@@ -0,0 +1,229 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+
+# PowerPC assembler distiller by <appro>.
+
+my $flavour = shift;
+my $output = shift;
+open STDOUT,">$output" || die "can't open $output: $!";
+
+my %GLOBALS;
+my $dotinlocallabels=($flavour=~/linux/)?1:0;
+
+################################################################
+# directives which need special treatment on different platforms
+################################################################
+my $globl = sub {
+    my $junk = shift;
+    my $name = shift;
+    my $global = \$GLOBALS{$name};
+    my $ret;
+
+    $name =~ s|^[\.\_]||;
+
+    SWITCH: for ($flavour) {
+	/aix/		&& do { $name = ".$name";
+				last;
+			      };
+	/osx/		&& do { $name = "_$name";
+				last;
+			      };
+	/linux/
+			&& do {	$ret = "_GLOBAL($name)";
+				last;
+			      };
+    }
+
+    $ret = ".globl	$name\nalign 5\n$name:" if (!$ret);
+    $$global = $name;
+    $ret;
+};
+my $text = sub {
+    my $ret = ($flavour =~ /aix/) ? ".csect\t.text[PR],7" : ".text";
+    $ret = ".abiversion	2\n".$ret	if ($flavour =~ /linux.*64le/);
+    $ret;
+};
+my $machine = sub {
+    my $junk = shift;
+    my $arch = shift;
+    if ($flavour =~ /osx/)
+    {	$arch =~ s/\"//g;
+	$arch = ($flavour=~/64/) ? "ppc970-64" : "ppc970" if ($arch eq "any");
+    }
+    ".machine	$arch";
+};
+my $size = sub {
+    if ($flavour =~ /linux/)
+    {	shift;
+	my $name = shift; $name =~ s|^[\.\_]||;
+	my $ret  = ".size	$name,.-".($flavour=~/64$/?".":"").$name;
+	$ret .= "\n.size	.$name,.-.$name" if ($flavour=~/64$/);
+	$ret;
+    }
+    else
+    {	"";	}
+};
+my $asciz = sub {
+    shift;
+    my $line = join(",",@_);
+    if ($line =~ /^"(.*)"$/)
+    {	".byte	" . join(",",unpack("C*",$1),0) . "\n.align	2";	}
+    else
+    {	"";	}
+};
+my $quad = sub {
+    shift;
+    my @ret;
+    my ($hi,$lo);
+    for (@_) {
+	if (/^0x([0-9a-f]*?)([0-9a-f]{1,8})$/io)
+	{  $hi=$1?"0x$1":"0"; $lo="0x$2";  }
+	elsif (/^([0-9]+)$/o)
+	{  $hi=$1>>32; $lo=$1&0xffffffff;  } # error-prone with 32-bit perl
+	else
+	{  $hi=undef; $lo=$_; }
+
+	if (defined($hi))
+	{  push(@ret,$flavour=~/le$/o?".long\t$lo,$hi":".long\t$hi,$lo");  }
+	else
+	{  push(@ret,".quad	$lo");  }
+    }
+    join("\n",@ret);
+};
+
+################################################################
+# simplified mnemonics not handled by at least one assembler
+################################################################
+my $cmplw = sub {
+    my $f = shift;
+    my $cr = 0; $cr = shift if ($#_>1);
+    # Some out-of-date 32-bit GNU assembler just can't handle cmplw...
+    ($flavour =~ /linux.*32/) ?
+	"	.long	".sprintf "0x%x",31<<26|$cr<<23|$_[0]<<16|$_[1]<<11|64 :
+	"	cmplw	".join(',',$cr,@_);
+};
+my $bdnz = sub {
+    my $f = shift;
+    my $bo = $f=~/[\+\-]/ ? 16+9 : 16;	# optional "to be taken" hint
+    "	bc	$bo,0,".shift;
+} if ($flavour!~/linux/);
+my $bltlr = sub {
+    my $f = shift;
+    my $bo = $f=~/\-/ ? 12+2 : 12;	# optional "not to be taken" hint
+    ($flavour =~ /linux/) ?		# GNU as doesn't allow most recent hints
+	"	.long	".sprintf "0x%x",19<<26|$bo<<21|16<<1 :
+	"	bclr	$bo,0";
+};
+my $bnelr = sub {
+    my $f = shift;
+    my $bo = $f=~/\-/ ? 4+2 : 4;	# optional "not to be taken" hint
+    ($flavour =~ /linux/) ?		# GNU as doesn't allow most recent hints
+	"	.long	".sprintf "0x%x",19<<26|$bo<<21|2<<16|16<<1 :
+	"	bclr	$bo,2";
+};
+my $beqlr = sub {
+    my $f = shift;
+    my $bo = $f=~/-/ ? 12+2 : 12;	# optional "not to be taken" hint
+    ($flavour =~ /linux/) ?		# GNU as doesn't allow most recent hints
+	"	.long	".sprintf "0x%X",19<<26|$bo<<21|2<<16|16<<1 :
+	"	bclr	$bo,2";
+};
+# GNU assembler can't handle extrdi rA,rS,16,48, or when sum of last two
+# arguments is 64, with "operand out of range" error.
+my $extrdi = sub {
+    my ($f,$ra,$rs,$n,$b) = @_;
+    $b = ($b+$n)&63; $n = 64-$n;
+    "	rldicl	$ra,$rs,$b,$n";
+};
+my $vmr = sub {
+    my ($f,$vx,$vy) = @_;
+    "	vor	$vx,$vy,$vy";
+};
+
+# Some ABIs specify vrsave, special-purpose register #256, as reserved
+# for system use.
+my $no_vrsave = ($flavour =~ /linux-ppc64le/);
+my $mtspr = sub {
+    my ($f,$idx,$ra) = @_;
+    if ($idx == 256 && $no_vrsave) {
+	"	or	$ra,$ra,$ra";
+    } else {
+	"	mtspr	$idx,$ra";
+    }
+};
+my $mfspr = sub {
+    my ($f,$rd,$idx) = @_;
+    if ($idx == 256 && $no_vrsave) {
+	"	li	$rd,-1";
+    } else {
+	"	mfspr	$rd,$idx";
+    }
+};
+
+# PowerISA 2.06 stuff
+sub vsxmem_op {
+    my ($f, $vrt, $ra, $rb, $op) = @_;
+    "	.long	".sprintf "0x%X",(31<<26)|($vrt<<21)|($ra<<16)|($rb<<11)|($op*2+1);
+}
+# made-up unaligned memory reference AltiVec/VMX instructions
+my $lvx_u	= sub {	vsxmem_op(@_, 844); };	# lxvd2x
+my $stvx_u	= sub {	vsxmem_op(@_, 972); };	# stxvd2x
+my $lvdx_u	= sub {	vsxmem_op(@_, 588); };	# lxsdx
+my $stvdx_u	= sub {	vsxmem_op(@_, 716); };	# stxsdx
+my $lvx_4w	= sub { vsxmem_op(@_, 780); };	# lxvw4x
+my $stvx_4w	= sub { vsxmem_op(@_, 908); };	# stxvw4x
+
+# PowerISA 2.07 stuff
+sub vcrypto_op {
+    my ($f, $vrt, $vra, $vrb, $op) = @_;
+    "	.long	".sprintf "0x%X",(4<<26)|($vrt<<21)|($vra<<16)|($vrb<<11)|$op;
+}
+my $vcipher	= sub { vcrypto_op(@_, 1288); };
+my $vcipherlast	= sub { vcrypto_op(@_, 1289); };
+my $vncipher	= sub { vcrypto_op(@_, 1352); };
+my $vncipherlast= sub { vcrypto_op(@_, 1353); };
+my $vsbox	= sub { vcrypto_op(@_, 0, 1480); };
+my $vshasigmad	= sub { my ($st,$six)=splice(@_,-2); vcrypto_op(@_, $st<<4|$six, 1730); };
+my $vshasigmaw	= sub { my ($st,$six)=splice(@_,-2); vcrypto_op(@_, $st<<4|$six, 1666); };
+my $vpmsumb	= sub { vcrypto_op(@_, 1032); };
+my $vpmsumd	= sub { vcrypto_op(@_, 1224); };
+my $vpmsubh	= sub { vcrypto_op(@_, 1096); };
+my $vpmsumw	= sub { vcrypto_op(@_, 1160); };
+my $vaddudm	= sub { vcrypto_op(@_, 192);  };
+my $vadduqm	= sub { vcrypto_op(@_, 256);  };
+
+my $mtsle	= sub {
+    my ($f, $arg) = @_;
+    "	.long	".sprintf "0x%X",(31<<26)|($arg<<21)|(147*2);
+};
+
+print "#include <asm/ppc_asm.h>\n" if $flavour =~ /linux/;
+
+while($line=<>) {
+
+    $line =~ s|[#!;].*$||;	# get rid of asm-style comments...
+    $line =~ s|/\*.*\*/||;	# ... and C-style comments...
+    $line =~ s|^\s+||;		# ... and skip white spaces in beginning...
+    $line =~ s|\s+$||;		# ... and at the end
+
+    {
+	$line =~ s|\b\.L(\w+)|L$1|g;	# common denominator for Locallabel
+	$line =~ s|\bL(\w+)|\.L$1|g	if ($dotinlocallabels);
+    }
+
+    {
+	$line =~ s|^\s*(\.?)(\w+)([\.\+\-]?)\s*||;
+	my $c = $1; $c = "\t" if ($c eq "");
+	my $mnemonic = $2;
+	my $f = $3;
+	my $opcode = eval("\$$mnemonic");
+	$line =~ s/\b(c?[rf]|v|vs)([0-9]+)\b/$2/g if ($c ne "." and $flavour !~ /osx/);
+	if (ref($opcode) eq 'CODE') { $line = &$opcode($f,split(',',$line)); }
+	elsif ($mnemonic)           { $line = $c.$mnemonic.$f."\t".$line; }
+    }
+
+    print $line if ($line);
+    print "\n";
+}
+
+close STDOUT;
diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h
index 2bbc0fcce04a..0d0c1447ecf0 100644
--- a/arch/powerpc/include/asm/book3s/64/tlbflush.h
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h
@@ -121,7 +121,8 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
 
 #define flush_tlb_fix_spurious_fault flush_tlb_fix_spurious_fault
 static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma,
-						unsigned long address)
+						unsigned long address,
+						pte_t *ptep)
 {
 	/*
 	 * Book3S 64 does not require spurious fault flushes because the PTE
@@ -148,6 +149,11 @@ static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma,
 	 */
 }
 
+static inline bool __pte_protnone(unsigned long pte)
+{
+	return (pte & (pgprot_val(PAGE_NONE) | _PAGE_RWX)) == pgprot_val(PAGE_NONE);
+}
+
 static inline bool __pte_flags_need_flush(unsigned long oldval,
 					  unsigned long newval)
 {
@@ -164,8 +170,8 @@ static inline bool __pte_flags_need_flush(unsigned long oldval,
 	/*
 	 * We do not expect kernel mappings or non-PTEs or not-present PTEs.
 	 */
-	VM_WARN_ON_ONCE(oldval & _PAGE_PRIVILEGED);
-	VM_WARN_ON_ONCE(newval & _PAGE_PRIVILEGED);
+	VM_WARN_ON_ONCE(!__pte_protnone(oldval) && oldval & _PAGE_PRIVILEGED);
+	VM_WARN_ON_ONCE(!__pte_protnone(newval) && newval & _PAGE_PRIVILEGED);
 	VM_WARN_ON_ONCE(!(oldval & _PAGE_PTE));
 	VM_WARN_ON_ONCE(!(newval & _PAGE_PTE));
 	VM_WARN_ON_ONCE(!(oldval & _PAGE_PRESENT));
diff --git a/arch/powerpc/include/asm/cpufeature.h b/arch/powerpc/include/asm/cpufeature.h
index f6f790a90367..2dcc66225e7f 100644
--- a/arch/powerpc/include/asm/cpufeature.h
+++ b/arch/powerpc/include/asm/cpufeature.h
@@ -22,6 +22,7 @@
  */
 
 #define PPC_MODULE_FEATURE_VEC_CRYPTO			(32 + ilog2(PPC_FEATURE2_VEC_CRYPTO))
+#define PPC_MODULE_FEATURE_P10				(32 + ilog2(PPC_FEATURE2_ARCH_3_1))
 
 #define cpu_feature(x)		(x)
 
diff --git a/arch/powerpc/include/asm/kasan.h b/arch/powerpc/include/asm/kasan.h
index 92a968202ba7..365d2720097c 100644
--- a/arch/powerpc/include/asm/kasan.h
+++ b/arch/powerpc/include/asm/kasan.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_KASAN_H
 #define __ASM_KASAN_H
 
-#ifdef CONFIG_KASAN
+#if defined(CONFIG_KASAN) && !defined(CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX)
 #define _GLOBAL_KASAN(fn)	_GLOBAL(__##fn)
 #define _GLOBAL_TOC_KASAN(fn)	_GLOBAL_TOC(__##fn)
 #define EXPORT_SYMBOL_KASAN(fn)	EXPORT_SYMBOL(__##fn)
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 6c6cb53d7045..aaaa576d0e15 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -67,7 +67,7 @@ void start_secondary(void *unused);
 extern int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us);
 extern int smp_send_safe_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us);
 extern void smp_send_debugger_break(void);
-extern void start_secondary_resume(void);
+extern void __noreturn start_secondary_resume(void);
 extern void smp_generic_give_timebase(void);
 extern void smp_generic_take_timebase(void);
 
diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h
index 2aa0e31e6884..60ba22770f51 100644
--- a/arch/powerpc/include/asm/string.h
+++ b/arch/powerpc/include/asm/string.h
@@ -30,11 +30,17 @@ extern int memcmp(const void *,const void *,__kernel_size_t);
 extern void * memchr(const void *,int,__kernel_size_t);
 void memcpy_flushcache(void *dest, const void *src, size_t size);
 
+#ifdef CONFIG_KASAN
+/* __mem variants are used by KASAN to implement instrumented meminstrinsics. */
+#ifdef CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX
+#define __memset memset
+#define __memcpy memcpy
+#define __memmove memmove
+#else /* CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX */
 void *__memset(void *s, int c, __kernel_size_t count);
 void *__memcpy(void *to, const void *from, __kernel_size_t n);
 void *__memmove(void *to, const void *from, __kernel_size_t n);
-
-#if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__)
+#ifndef __SANITIZE_ADDRESS__
 /*
  * For files that are not instrumented (e.g. mm/slub.c) we
  * should use not instrumented version of mem* functions.
@@ -46,8 +52,9 @@ void *__memmove(void *to, const void *from, __kernel_size_t n);
 #ifndef __NO_FORTIFY
 #define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */
 #endif
-
-#endif
+#endif /* !__SANITIZE_ADDRESS__ */
+#endif /* CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX */
+#endif /* CONFIG_KASAN */
 
 #ifdef CONFIG_PPC64
 #ifndef CONFIG_KASAN
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index ea6536171778..816a63fd71fb 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -163,8 +163,7 @@ static uint32_t do_plt_call(void *location,
 
 	pr_debug("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location);
 	/* Init, or core PLT? */
-	if (location >= mod->core_layout.base
-	    && location < mod->core_layout.base + mod->core_layout.size)
+	if (within_module_core((unsigned long)location, mod))
 		entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
 	else
 		entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
@@ -322,14 +321,14 @@ notrace int module_trampoline_target(struct module *mod, unsigned long addr,
 
 int module_finalize_ftrace(struct module *module, const Elf_Shdr *sechdrs)
 {
-	module->arch.tramp = do_plt_call(module->core_layout.base,
+	module->arch.tramp = do_plt_call(module->mem[MOD_TEXT].base,
 					 (unsigned long)ftrace_caller,
 					 sechdrs, module);
 	if (!module->arch.tramp)
 		return -ENOENT;
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	module->arch.tramp_regs = do_plt_call(module->core_layout.base,
+	module->arch.tramp_regs = do_plt_call(module->mem[MOD_TEXT].base,
 					      (unsigned long)ftrace_regs_caller,
 					      sechdrs, module);
 	if (!module->arch.tramp_regs)
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index d67cf79bf5d0..e88d7c9feeec 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -880,6 +880,7 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 static void pcibios_fixup_resources(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct resource *res;
 	int i;
 
 	if (!hose) {
@@ -891,9 +892,9 @@ static void pcibios_fixup_resources(struct pci_dev *dev)
 	if (dev->is_virtfn)
 		return;
 
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		struct resource *res = dev->resource + i;
+	pci_dev_for_each_resource(dev, res, i) {
 		struct pci_bus_region reg;
+
 		if (!res->flags)
 			continue;
 
@@ -1452,11 +1453,10 @@ void pcibios_claim_one_bus(struct pci_bus *bus)
 	struct pci_bus *child_bus;
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
+		struct resource *r;
 		int i;
 
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			struct resource *r = &dev->resource[i];
-
+		pci_dev_for_each_resource(dev, r, i) {
 			if (r->parent || !r->start || !r->flags)
 				continue;
 
@@ -1705,19 +1705,20 @@ EXPORT_SYMBOL_GPL(pcibios_scan_phb);
 
 static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
 {
-	int i, class = dev->class >> 8;
+	int class = dev->class >> 8;
 	/* When configured as agent, programming interface = 1 */
 	int prog_if = dev->class & 0xf;
+	struct resource *r;
 
 	if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
 	     class == PCI_CLASS_BRIDGE_OTHER) &&
 		(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
 		(prog_if == 0) &&
 		(dev->bus->parent == NULL)) {
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end = 0;
-			dev->resource[i].flags = 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start = 0;
+			r->end = 0;
+			r->flags = 0;
 		}
 	}
 }
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 5a319863f289..69623b9045d5 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -13,8 +13,13 @@
 # If you really need to reference something from prom_init.o add
 # it to the list below:
 
-grep "^CONFIG_KASAN=y$" ${KCONFIG_CONFIG} >/dev/null
-if [ $? -eq 0 ]
+has_renamed_memintrinsics()
+{
+	grep -q "^CONFIG_KASAN=y$" ${KCONFIG_CONFIG} && \
+		! grep -q "^CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX=y" ${KCONFIG_CONFIG}
+}
+
+if has_renamed_memintrinsics
 then
 	MEM_FUNCS="__memcpy __memset"
 else
diff --git a/arch/powerpc/kernel/ptrace/ptrace-view.c b/arch/powerpc/kernel/ptrace/ptrace-view.c
index 2087a785f05f..5fff0d04b23f 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-view.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-view.c
@@ -290,6 +290,9 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
 static int ppr_get(struct task_struct *target, const struct user_regset *regset,
 		   struct membuf to)
 {
+	if (!target->thread.regs)
+		return -EINVAL;
+
 	return membuf_write(&to, &target->thread.regs->ppr, sizeof(u64));
 }
 
@@ -297,6 +300,9 @@ static int ppr_set(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count, const void *kbuf,
 		   const void __user *ubuf)
 {
+	if (!target->thread.regs)
+		return -EINVAL;
+
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.regs->ppr, 0, sizeof(u64));
 }
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index b2e0d3ce4261..246201d0d879 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -480,7 +480,7 @@ void early_setup_secondary(void)
 
 #endif /* CONFIG_SMP */
 
-void panic_smp_self_stop(void)
+void __noreturn panic_smp_self_stop(void)
 {
 	hard_irq_disable();
 	spin_begin();
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 35f101ccb540..265801a3e94c 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1613,7 +1613,7 @@ void start_secondary(void *unused)
 	if (IS_ENABLED(CONFIG_PPC32))
 		setup_kup();
 
-	mmgrab(&init_mm);
+	mmgrab_lazy_tlb(&init_mm);
 	current->active_mm = &init_mm;
 
 	smp_store_cpu_info(cpu);
@@ -1754,7 +1754,7 @@ void __cpu_die(unsigned int cpu)
 		smp_ops->cpu_die(cpu);
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	/*
 	 * Disable on the down path. This will be re-enabled by
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index ef9a61718940..0f39a6b84132 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -217,13 +217,18 @@ static DEVICE_ATTR(dscr_default, 0600,
 static void __init sysfs_create_dscr_default(void)
 {
 	if (cpu_has_feature(CPU_FTR_DSCR)) {
+		struct device *dev_root;
 		int cpu;
 
 		dscr_default = spr_default_dscr;
 		for_each_possible_cpu(cpu)
 			paca_ptrs[cpu]->dscr_default = dscr_default;
 
-		device_create_file(cpu_subsys.dev_root, &dev_attr_dscr_default);
+		dev_root = bus_get_dev_root(&cpu_subsys);
+		if (dev_root) {
+			device_create_file(dev_root, &dev_attr_dscr_default);
+			put_device(dev_root);
+		}
 	}
 }
 #endif /* CONFIG_PPC64 */
@@ -746,7 +751,12 @@ static DEVICE_ATTR(svm, 0444, show_svm, NULL);
 
 static void __init create_svm_file(void)
 {
-	device_create_file(cpu_subsys.dev_root, &dev_attr_svm);
+	struct device *dev_root = bus_get_dev_root(&cpu_subsys);
+
+	if (dev_root) {
+		device_create_file(dev_root, &dev_attr_svm);
+		put_device(dev_root);
+	}
 }
 #else
 static void __init create_svm_file(void)
diff --git a/arch/powerpc/kernel/vdso/Makefile b/arch/powerpc/kernel/vdso/Makefile
index 66f723f53be2..4c3f34485f08 100644
--- a/arch/powerpc/kernel/vdso/Makefile
+++ b/arch/powerpc/kernel/vdso/Makefile
@@ -2,7 +2,7 @@
 
 # List of files in the vdso, has to be asm only for now
 
-ARCH_REL_TYPE_ABS := R_PPC_JUMP_SLOT|R_PPC_GLOB_DAT|R_PPC_ADDR32|R_PPC_ADDR24|R_PPC_ADDR16|R_PPC_ADDR16_LO|R_PPC_ADDR16_HI|R_PPC_ADDR16_HA|R_PPC_ADDR14|R_PPC_ADDR14_BRTAKEN|R_PPC_ADDR14_BRNTAKEN|R_PPC_REL24
+# Include the generic Makefile to check the built vdso.
 include $(srctree)/lib/vdso/Makefile
 
 obj-vdso32 = sigtramp32-32.o gettimeofday-32.o datapage-32.o cacheflush-32.o note-32.o getcpu-32.o
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index a9f57dad6d91..902611954200 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -22,7 +22,6 @@ config KVM
 	select PREEMPT_NOTIFIERS
 	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
-	select SRCU
 	select KVM_VFIO
 	select IRQ_BYPASS_MANAGER
 	select HAVE_KVM_IRQ_BYPASS
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 4c5405fc5538..d23e25e8432d 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -576,6 +576,12 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		break;
 #endif
 
+#ifdef CONFIG_HAVE_KVM_IRQFD
+	case KVM_CAP_IRQFD_RESAMPLE:
+		r = !xive_enabled();
+		break;
+#endif
+
 	case KVM_CAP_PPC_ALLOC_HTAB:
 		r = hv_enabled;
 		break;
diff --git a/arch/powerpc/mm/book3s64/iommu_api.c b/arch/powerpc/mm/book3s64/iommu_api.c
index 7fcfba162e0d..81d7185e2ae8 100644
--- a/arch/powerpc/mm/book3s64/iommu_api.c
+++ b/arch/powerpc/mm/book3s64/iommu_api.c
@@ -97,7 +97,7 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
 	}
 
 	mmap_read_lock(mm);
-	chunk = (1UL << (PAGE_SHIFT + MAX_ORDER - 1)) /
+	chunk = (1UL << (PAGE_SHIFT + MAX_ORDER)) /
 			sizeof(struct vm_area_struct *);
 	chunk = min(chunk, entries);
 	for (entry = 0; entry < entries; entry += chunk) {
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index e50bc5fc7ddf..ce804b7bf84e 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -797,10 +797,10 @@ void exit_lazy_flush_tlb(struct mm_struct *mm, bool always_flush)
 	if (current->active_mm == mm) {
 		WARN_ON_ONCE(current->mm != NULL);
 		/* Is a kernel thread and is using mm as the lazy tlb */
-		mmgrab(&init_mm);
+		mmgrab_lazy_tlb(&init_mm);
 		current->active_mm = &init_mm;
 		switch_mm_irqs_off(mm, &init_mm, current);
-		mmdrop(mm);
+		mmdrop_lazy_tlb(mm);
 	}
 
 	/*
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index af46aa88422b..531177a4ee08 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -474,6 +474,40 @@ static int ___do_page_fault(struct pt_regs *regs, unsigned long address,
 	if (is_exec)
 		flags |= FAULT_FLAG_INSTRUCTION;
 
+#ifdef CONFIG_PER_VMA_LOCK
+	if (!(flags & FAULT_FLAG_USER))
+		goto lock_mmap;
+
+	vma = lock_vma_under_rcu(mm, address);
+	if (!vma)
+		goto lock_mmap;
+
+	if (unlikely(access_pkey_error(is_write, is_exec,
+				       (error_code & DSISR_KEYFAULT), vma))) {
+		vma_end_read(vma);
+		goto lock_mmap;
+	}
+
+	if (unlikely(access_error(is_write, is_exec, vma))) {
+		vma_end_read(vma);
+		goto lock_mmap;
+	}
+
+	fault = handle_mm_fault(vma, address, flags | FAULT_FLAG_VMA_LOCK, regs);
+	vma_end_read(vma);
+
+	if (!(fault & VM_FAULT_RETRY)) {
+		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+		goto done;
+	}
+	count_vm_vma_lock_event(VMA_LOCK_RETRY);
+
+	if (fault_signal_pending(fault, regs))
+		return user_mode(regs) ? 0 : SIGBUS;
+
+lock_mmap:
+#endif /* CONFIG_PER_VMA_LOCK */
+
 	/* When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
 	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
@@ -550,6 +584,9 @@ retry:
 
 	mmap_read_unlock(current->mm);
 
+#ifdef CONFIG_PER_VMA_LOCK
+done:
+#endif
 	if (unlikely(fault & VM_FAULT_ERROR))
 		return mm_fault_error(regs, address, fault);
 
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index f1ba8d1e8c1a..b900933507da 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -615,7 +615,7 @@ void __init gigantic_hugetlb_cma_reserve(void)
 		order = mmu_psize_to_shift(MMU_PAGE_16G) - PAGE_SHIFT;
 
 	if (order) {
-		VM_WARN_ON(order < MAX_ORDER);
+		VM_WARN_ON(order <= MAX_ORDER);
 		hugetlb_cma_reserve(order);
 	}
 }
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index b44ce71917d7..16cfe56be05b 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -366,6 +366,7 @@ void update_numa_distance(struct device_node *node)
 	WARN(numa_distance_table[nid][nid] == -1,
 	     "NUMA distance details for node %d not provided\n", nid);
 }
+EXPORT_SYMBOL_GPL(update_numa_distance);
 
 /*
  * ibm,numa-lookup-index-table= {N, domainid1, domainid2, ..... domainidN}
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 614ea6dc994c..b3c466c50535 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -65,6 +65,7 @@ config PPC4xx_GPIO
 	bool "PPC4xx GPIO support"
 	depends on 40x
 	select GPIOLIB
+	select OF_GPIO_MM_GPIOCHIP
 	help
 	  Enable gpiolib support for ppc40x based boards
 
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 25b80cd558f8..1624ebf95497 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -230,6 +230,7 @@ config PPC4xx_GPIO
 	bool "PPC4xx GPIO support"
 	depends on 44x
 	select GPIOLIB
+	select OF_GPIO_MM_GPIOCHIP
 	help
 	  Enable gpiolib support for ppc440 based boards
 
diff --git a/arch/powerpc/platforms/4xx/gpio.c b/arch/powerpc/platforms/4xx/gpio.c
index 49ee8d365852..e5f2319e5cbe 100644
--- a/arch/powerpc/platforms/4xx/gpio.c
+++ b/arch/powerpc/platforms/4xx/gpio.c
@@ -14,7 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
 #include <linux/gpio/driver.h>
 #include <linux/types.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/platforms/4xx/pci.c b/arch/powerpc/platforms/4xx/pci.c
index ca5dd7a5842a..07dcc2b8007f 100644
--- a/arch/powerpc/platforms/4xx/pci.c
+++ b/arch/powerpc/platforms/4xx/pci.c
@@ -57,7 +57,7 @@ static inline int ppc440spe_revA(void)
 static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
 {
 	struct pci_controller *hose;
-	int i;
+	struct resource *r;
 
 	if (dev->devfn != 0 || dev->bus->self != NULL)
 		return;
@@ -79,9 +79,9 @@ static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
 	/* Hide the PCI host BARs from the kernel as their content doesn't
 	 * fit well in the resource management
 	 */
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		dev->resource[i].start = dev->resource[i].end = 0;
-		dev->resource[i].flags = 0;
+	pci_dev_for_each_resource(dev, r) {
+		r->start = r->end = 0;
+		r->flags = 0;
 	}
 
 	printk(KERN_INFO "PCI: Hiding 4xx host bridge resources %s\n",
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 859e2818c43d..0ca4401ba781 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -327,14 +327,13 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 static void
 mpc52xx_pci_fixup_resources(struct pci_dev *dev)
 {
-	int i;
+	struct resource *res;
 
 	pr_debug("%s() %.4x:%.4x\n", __func__, dev->vendor, dev->device);
 
 	/* We don't rely on boot loader for PCI and resets all
 	   devices */
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		struct resource *res = &dev->resource[i];
+	pci_dev_for_each_resource(dev, res) {
 		if (res->end > res->start) {	/* Only valid resources */
 			res->end -= res->start;
 			res->start = 0;
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index caa96edf0e72..4ab1d48cd229 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -144,7 +144,7 @@ static int __init fsl_spi_init(struct spi_board_info *board_infos,
 
 static void mpc83xx_spi_cs_control(struct spi_device *spi, bool on)
 {
-	pr_debug("%s %d %d\n", __func__, spi->chip_select, on);
+	pr_debug("%s %d %d\n", __func__, spi_get_chipselect(spi, 0), on);
 	par_io_data_set(3, 13, on);
 }
 
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 60cc5b537a98..a14d9d8997a4 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -101,6 +101,7 @@ comment "Generic MPC8xx Options"
 config 8xx_GPIO
 	bool "GPIO API Support"
 	select GPIOLIB
+	select OF_GPIO_MM_GPIOCHIP
 	help
 	  Saying Y here will cause the ports on an MPC8xx processor to be used
 	  with the GPIO API.  If you say N here, the kernel needs less memory.
diff --git a/arch/powerpc/platforms/8xx/cpm1.c b/arch/powerpc/platforms/8xx/cpm1.c
index bb38c8d8f8de..34ab29966c8b 100644
--- a/arch/powerpc/platforms/8xx/cpm1.c
+++ b/arch/powerpc/platforms/8xx/cpm1.c
@@ -44,7 +44,7 @@
 #include <asm/fs_pd.h>
 
 #ifdef CONFIG_8xx_GPIO
-#include <linux/of_gpio.h>
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
 #endif
 
 #define CPM_MAP_SIZE    (0x4000)
@@ -94,7 +94,7 @@ int cpm_command(u32 command, u8 opcode)
 	int i, ret;
 	unsigned long flags;
 
-	if (command & 0xffffff0f)
+	if (command & 0xffffff03)
 		return -EINVAL;
 
 	spin_lock_irqsave(&cmd_lock, flags);
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index d41dad227de8..8e4bbd19dec5 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -244,6 +244,7 @@ config QE_GPIO
 	bool "QE GPIO support"
 	depends on QUICC_ENGINE
 	select GPIOLIB
+	select OF_GPIO_MM_GPIOCHIP
 	help
 	  Say Y here if you're going to use hardware that connects to the
 	  QE GPIOs.
@@ -254,6 +255,7 @@ config CPM2
 	select CPM
 	select HAVE_PCI
 	select GPIOLIB
+	select OF_GPIO_MM_GPIOCHIP
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
diff --git a/arch/powerpc/platforms/book3s/vas-api.c b/arch/powerpc/platforms/book3s/vas-api.c
index 36c21648d19a..77ea9335fd04 100644
--- a/arch/powerpc/platforms/book3s/vas-api.c
+++ b/arch/powerpc/platforms/book3s/vas-api.c
@@ -581,7 +581,7 @@ int vas_register_coproc_api(struct module *mod, enum vas_cop_type cop_type,
 	pr_devel("%s device allocated, dev [%i,%i]\n", name,
 			MAJOR(coproc_device.devt), MINOR(coproc_device.devt));
 
-	coproc_device.class = class_create(mod, name);
+	coproc_device.class = class_create(name);
 	if (IS_ERR(coproc_device.class)) {
 		rc = PTR_ERR(coproc_device.class);
 		pr_err("Unable to create %s class %d\n", name, rc);
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index ae248a161b43..70a46acc70d6 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -16,6 +16,7 @@ config PPC_POWERNV
 	select PPC_DOORBELL
 	select MMU_NOTIFIER
 	select FORCE_SMP
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	default y
 
 config OPAL_PRD
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 841cb7f31f4f..6dfe8d611164 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -1464,14 +1464,19 @@ static int __init pnv_init_idle_states(void)
 			power7_fastsleep_workaround_entry = false;
 			power7_fastsleep_workaround_exit = false;
 		} else {
+			struct device *dev_root;
 			/*
 			 * OPAL_PM_SLEEP_ENABLED_ER1 is set. It indicates that
 			 * workaround is needed to use fastsleep. Provide sysfs
 			 * control to choose how this workaround has to be
 			 * applied.
 			 */
-			device_create_file(cpu_subsys.dev_root,
-				&dev_attr_fastsleep_workaround_applyonce);
+			dev_root = bus_get_dev_root(&cpu_subsys);
+			if (dev_root) {
+				device_create_file(dev_root,
+						   &dev_attr_fastsleep_workaround_applyonce);
+				put_device(dev_root);
+			}
 		}
 
 		update_subcore_sibling_mask();
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 4f6e20a35aa1..5a81f106068e 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1740,7 +1740,7 @@ static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe)
 	 * DMA window can be larger than available memory, which will
 	 * cause errors later.
 	 */
-	const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER - 1);
+	const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER);
 
 	/*
 	 * We create the default window as big as we can. The constraint is
diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c
index c53c4c797768..191424468f10 100644
--- a/arch/powerpc/platforms/powernv/subcore.c
+++ b/arch/powerpc/platforms/powernv/subcore.c
@@ -417,7 +417,9 @@ static DEVICE_ATTR(subcores_per_core, 0644,
 
 static int subcore_init(void)
 {
+	struct device *dev_root;
 	unsigned pvr_ver;
+	int rc = 0;
 
 	pvr_ver = PVR_VER(mfspr(SPRN_PVR));
 
@@ -437,7 +439,11 @@ static int subcore_init(void)
 
 	set_subcores_per_core(1);
 
-	return device_create_file(cpu_subsys.dev_root,
-				  &dev_attr_subcores_per_core);
+	dev_root = bus_get_dev_root(&cpu_subsys);
+	if (dev_root) {
+		rc = device_create_file(dev_root, &dev_attr_subcores_per_core);
+		put_device(dev_root);
+	}
+	return rc;
 }
 machine_device_initcall(powernv, subcore_init);
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 21b22bf16ce6..4ebf2ef2845d 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -22,6 +22,7 @@ config PPC_PSERIES
 	select HOTPLUG_CPU
 	select FORCE_SMP
 	select SWIOTLB
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	default y
 
 config PARAVIRT
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 75ffdbcd2865..719c97a155ed 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -512,7 +512,7 @@ static int dlpar_parse_id_type(char **cmd, struct pseries_hp_errorlog *hp_elog)
 	return 0;
 }
 
-static ssize_t dlpar_store(struct class *class, struct class_attribute *attr,
+static ssize_t dlpar_store(const struct class *class, const struct class_attribute *attr,
 			   const char *buf, size_t count)
 {
 	struct pseries_hp_errorlog hp_elog;
@@ -551,7 +551,7 @@ dlpar_store_out:
 	return rc ? rc : count;
 }
 
-static ssize_t dlpar_show(struct class *class, struct class_attribute *attr,
+static ssize_t dlpar_show(const struct class *class, const struct class_attribute *attr,
 			  char *buf)
 {
 	return sprintf(buf, "%s\n", "memory,cpu");
diff --git a/arch/powerpc/platforms/pseries/ibmebus.c b/arch/powerpc/platforms/pseries/ibmebus.c
index bb9c18682783..44703f13985b 100644
--- a/arch/powerpc/platforms/pseries/ibmebus.c
+++ b/arch/powerpc/platforms/pseries/ibmebus.c
@@ -267,7 +267,7 @@ static char *ibmebus_chomp(const char *in, size_t count)
 	return out;
 }
 
-static ssize_t probe_store(struct bus_type *bus, const char *buf, size_t count)
+static ssize_t probe_store(const struct bus_type *bus, const char *buf, size_t count)
 {
 	struct device_node *dn = NULL;
 	struct device *dev;
@@ -305,7 +305,7 @@ out:
 }
 static BUS_ATTR_WO(probe);
 
-static ssize_t remove_store(struct bus_type *bus, const char *buf, size_t count)
+static ssize_t remove_store(const struct bus_type *bus, const char *buf, size_t count)
 {
 	struct device *dev;
 	char *path;
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 643d309d1bd0..6b25642adfa0 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -787,8 +787,8 @@ int rtas_syscall_dispatch_ibm_suspend_me(u64 handle)
 	return pseries_migrate_partition(handle);
 }
 
-static ssize_t migration_store(struct class *class,
-			       struct class_attribute *attr, const char *buf,
+static ssize_t migration_store(const struct class *class,
+			       const struct class_attribute *attr, const char *buf,
 			       size_t count)
 {
 	u64 streamid;
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index 2f8385523a13..1a53e048ceb7 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -1428,6 +1428,13 @@ static int papr_scm_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	/*
+	 * open firmware platform device create won't update the NUMA 
+	 * distance table. For PAPR SCM devices we use numa_map_to_online_node()
+	 * to find the nearest online NUMA node and that requires correct
+	 * distance table information.
+	 */
+	update_numa_distance(dn);
 
 	p = kzalloc(sizeof(*p), GFP_KERNEL);
 	if (!p)
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 60e0a58928ef..1772ae3d193d 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -240,7 +240,7 @@ void __init pSeries_final_fixup(void)
  */
 static void fixup_winbond_82c105(struct pci_dev* dev)
 {
-	int i;
+	struct resource *r;
 	unsigned int reg;
 
 	if (!machine_is(pseries))
@@ -251,14 +251,14 @@ static void fixup_winbond_82c105(struct pci_dev* dev)
 	/* Enable LEGIRQ to use INTC instead of ISA interrupts */
 	pci_write_config_dword(dev, 0x40, reg | (1<<11));
 
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; ++i) {
+	pci_dev_for_each_resource(dev, r) {
 		/* zap the 2nd function of the winbond chip */
-		if (dev->resource[i].flags & IORESOURCE_IO
-		    && dev->bus->number == 0 && dev->devfn == 0x81)
-			dev->resource[i].flags &= ~IORESOURCE_IO;
-		if (dev->resource[i].start == 0 && dev->resource[i].end) {
-			dev->resource[i].flags = 0;
-			dev->resource[i].end = 0;
+		if (dev->bus->number == 0 && dev->devfn == 0x81 &&
+		    r->flags & IORESOURCE_IO)
+			r->flags &= ~IORESOURCE_IO;
+		if (r->start == 0 && r->end) {
+			r->flags = 0;
+			r->end = 0;
 		}
 	}
 }
diff --git a/arch/powerpc/platforms/pseries/pseries_energy.c b/arch/powerpc/platforms/pseries/pseries_energy.c
index 09e98d301db0..2c661b798235 100644
--- a/arch/powerpc/platforms/pseries/pseries_energy.c
+++ b/arch/powerpc/platforms/pseries/pseries_energy.c
@@ -300,20 +300,22 @@ static struct device_attribute attr_percpu_deactivate_hint =
 static int __init pseries_energy_init(void)
 {
 	int cpu, err;
-	struct device *cpu_dev;
+	struct device *cpu_dev, *dev_root;
 
 	if (!firmware_has_feature(FW_FEATURE_BEST_ENERGY))
 		return 0; /* H_BEST_ENERGY hcall not supported */
 
 	/* Create the sysfs files */
-	err = device_create_file(cpu_subsys.dev_root,
-				&attr_cpu_activate_hint_list);
-	if (!err)
-		err = device_create_file(cpu_subsys.dev_root,
-				&attr_cpu_deactivate_hint_list);
+	dev_root = bus_get_dev_root(&cpu_subsys);
+	if (dev_root) {
+		err = device_create_file(dev_root, &attr_cpu_activate_hint_list);
+		if (!err)
+			err = device_create_file(dev_root, &attr_cpu_deactivate_hint_list);
+		put_device(dev_root);
+		if (err)
+			return err;
+	}
 
-	if (err)
-		return err;
 	for_each_possible_cpu(cpu) {
 		cpu_dev = get_cpu_device(cpu);
 		err = device_create_file(cpu_dev,
@@ -337,14 +339,18 @@ static int __init pseries_energy_init(void)
 static void __exit pseries_energy_cleanup(void)
 {
 	int cpu;
-	struct device *cpu_dev;
+	struct device *cpu_dev, *dev_root;
 
 	if (!sysfs_entries)
 		return;
 
 	/* Remove the sysfs files */
-	device_remove_file(cpu_subsys.dev_root, &attr_cpu_activate_hint_list);
-	device_remove_file(cpu_subsys.dev_root, &attr_cpu_deactivate_hint_list);
+	dev_root = bus_get_dev_root(&cpu_subsys);
+	if (dev_root) {
+		device_remove_file(dev_root, &attr_cpu_activate_hint_list);
+		device_remove_file(dev_root, &attr_cpu_deactivate_hint_list);
+		put_device(dev_root);
+	}
 
 	for_each_possible_cpu(cpu) {
 		cpu_dev = get_cpu_device(cpu);
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
index 1b902cbf85c5..5c43435472cc 100644
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -143,6 +143,7 @@ static const struct platform_suspend_ops pseries_suspend_ops = {
  **/
 static int pseries_suspend_sysfs_register(struct device *dev)
 {
+	struct device *dev_root;
 	int rc;
 
 	if ((rc = subsys_system_register(&suspend_subsys, NULL)))
@@ -151,8 +152,13 @@ static int pseries_suspend_sysfs_register(struct device *dev)
 	dev->id = 0;
 	dev->bus = &suspend_subsys;
 
-	if ((rc = device_create_file(suspend_subsys.dev_root, &dev_attr_hibernate)))
-		goto subsys_unregister;
+	dev_root = bus_get_dev_root(&suspend_subsys);
+	if (dev_root) {
+		rc = device_create_file(dev_root, &dev_attr_hibernate);
+		put_device(dev_root);
+		if (rc)
+			goto subsys_unregister;
+	}
 
 	return 0;
 
diff --git a/arch/powerpc/platforms/pseries/vas.c b/arch/powerpc/platforms/pseries/vas.c
index 559112312810..513180467562 100644
--- a/arch/powerpc/platforms/pseries/vas.c
+++ b/arch/powerpc/platforms/pseries/vas.c
@@ -856,6 +856,13 @@ int pseries_vas_dlpar_cpu(void)
 {
 	int new_nr_creds, rc;
 
+	/*
+	 * NX-GZIP is not enabled. Nothing to do for DLPAR event
+	 */
+	if (!copypaste_feat)
+		return 0;
+
+
 	rc = h_query_vas_capabilities(H_QUERY_VAS_CAPABILITIES,
 				      vascaps[VAS_GZIP_DEF_FEAT_TYPE].feat,
 				      (u64)virt_to_phys(&hv_cop_caps));
@@ -1012,6 +1019,7 @@ static int __init pseries_vas_init(void)
 	 * Linux supports user space COPY/PASTE only with Radix
 	 */
 	if (!radix_enabled()) {
+		copypaste_feat = false;
 		pr_err("API is supported only with radix page tables\n");
 		return -ENOTSUPP;
 	}
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index 770df9351aaa..bf7aff6390be 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -1006,7 +1006,7 @@ ATTRIBUTE_GROUPS(vio_cmo_dev);
 /* sysfs bus functions and data structures for CMO */
 
 #define viobus_cmo_rd_attr(name)                                        \
-static ssize_t cmo_bus_##name##_show(struct bus_type *bt, char *buf)    \
+static ssize_t cmo_bus_##name##_show(const struct bus_type *bt, char *buf)    \
 {                                                                       \
 	return sprintf(buf, "%lu\n", vio_cmo.name);                     \
 }                                                                       \
@@ -1015,7 +1015,7 @@ static struct bus_attribute bus_attr_cmo_bus_##name =			\
 
 #define viobus_cmo_pool_rd_attr(name, var)                              \
 static ssize_t                                                          \
-cmo_##name##_##var##_show(struct bus_type *bt, char *buf)               \
+cmo_##name##_##var##_show(const struct bus_type *bt, char *buf)         \
 {                                                                       \
 	return sprintf(buf, "%lu\n", vio_cmo.name.var);                 \
 }                                                                       \
@@ -1030,12 +1030,12 @@ viobus_cmo_pool_rd_attr(reserve, size);
 viobus_cmo_pool_rd_attr(excess, size);
 viobus_cmo_pool_rd_attr(excess, free);
 
-static ssize_t cmo_high_show(struct bus_type *bt, char *buf)
+static ssize_t cmo_high_show(const struct bus_type *bt, char *buf)
 {
 	return sprintf(buf, "%lu\n", vio_cmo.high);
 }
 
-static ssize_t cmo_high_store(struct bus_type *bt, const char *buf,
+static ssize_t cmo_high_store(const struct bus_type *bt, const char *buf,
 			      size_t count)
 {
 	unsigned long flags;
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 7dc1960f8bdb..8234013a8772 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -31,7 +31,7 @@
 #include <mm/mmu_decl.h>
 
 #if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
-#include <linux/of_gpio.h>
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
 #endif
 
 static int __init cpm_init(void)
diff --git a/arch/powerpc/sysdev/fsl_mpic_timer_wakeup.c b/arch/powerpc/sysdev/fsl_mpic_timer_wakeup.c
index c2baa283e624..ce6c739c51e5 100644
--- a/arch/powerpc/sysdev/fsl_mpic_timer_wakeup.c
+++ b/arch/powerpc/sysdev/fsl_mpic_timer_wakeup.c
@@ -116,7 +116,8 @@ static struct device_attribute mpic_attributes = __ATTR(timer_wakeup, 0644,
 
 static int __init fsl_wakeup_sys_init(void)
 {
-	int ret;
+	struct device *dev_root;
+	int ret = -EINVAL;
 
 	fsl_wakeup = kzalloc(sizeof(struct fsl_mpic_timer_wakeup), GFP_KERNEL);
 	if (!fsl_wakeup)
@@ -124,16 +125,26 @@ static int __init fsl_wakeup_sys_init(void)
 
 	INIT_WORK(&fsl_wakeup->free_work, fsl_free_resource);
 
-	ret = device_create_file(mpic_subsys.dev_root, &mpic_attributes);
-	if (ret)
-		kfree(fsl_wakeup);
+	dev_root = bus_get_dev_root(&mpic_subsys);
+	if (dev_root) {
+		ret = device_create_file(dev_root, &mpic_attributes);
+		put_device(dev_root);
+		if (ret)
+			kfree(fsl_wakeup);
+	}
 
 	return ret;
 }
 
 static void __exit fsl_wakeup_sys_exit(void)
 {
-	device_remove_file(mpic_subsys.dev_root, &mpic_attributes);
+	struct device *dev_root;
+
+	dev_root = bus_get_dev_root(&mpic_subsys);
+	if (dev_root) {
+		device_remove_file(dev_root, &mpic_attributes);
+		put_device(dev_root);
+	}
 
 	mutex_lock(&sysfs_lock);
 
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index c5e42cc37604..6adea68a2c05 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -63,6 +63,8 @@ config RISCV
 	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP if MMU
+	select GENERIC_IRQ_IPI if SMP
+	select GENERIC_IRQ_IPI_MUX if SMP
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
@@ -74,6 +76,7 @@ config RISCV
 	select GENERIC_TIME_VSYSCALL if MMU && 64BIT
 	select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT if MMU
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT && !XIP_KERNEL
@@ -126,6 +129,7 @@ config RISCV
 	select OF_IRQ
 	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_MSI if PCI
+	select RISCV_ALTERNATIVE if !XIP_KERNEL
 	select RISCV_INTC
 	select RISCV_TIMER if RISCV_SBI
 	select SIFIVE_PLIC
@@ -401,9 +405,8 @@ config RISCV_ISA_C
 config RISCV_ISA_SVPBMT
 	bool "SVPBMT extension support"
 	depends on 64BIT && MMU
-	depends on !XIP_KERNEL
+	depends on RISCV_ALTERNATIVE
 	default y
-	select RISCV_ALTERNATIVE
 	help
 	   Adds support to dynamically detect the presence of the SVPBMT
 	   ISA-extension (Supervisor-mode: page-based memory types) and
@@ -428,8 +431,8 @@ config TOOLCHAIN_HAS_ZBB
 config RISCV_ISA_ZBB
 	bool "Zbb extension support for bit manipulation instructions"
 	depends on TOOLCHAIN_HAS_ZBB
-	depends on !XIP_KERNEL && MMU
-	select RISCV_ALTERNATIVE
+	depends on MMU
+	depends on RISCV_ALTERNATIVE
 	default y
 	help
 	   Adds support to dynamically detect the presence of the ZBB
@@ -443,9 +446,9 @@ config RISCV_ISA_ZBB
 
 config RISCV_ISA_ZICBOM
 	bool "Zicbom extension support for non-coherent DMA operation"
-	depends on !XIP_KERNEL && MMU
+	depends on MMU
+	depends on RISCV_ALTERNATIVE
 	default y
-	select RISCV_ALTERNATIVE
 	select RISCV_DMA_NONCOHERENT
 	help
 	   Adds support to dynamically detect the presence of the ZICBOM
@@ -464,6 +467,28 @@ config TOOLCHAIN_HAS_ZIHINTPAUSE
 	depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zihintpause)
 	depends on LLD_VERSION >= 150000 || LD_VERSION >= 23600
 
+config TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI
+	def_bool y
+	# https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=aed44286efa8ae8717a77d94b51ac3614e2ca6dc
+	depends on AS_IS_GNU && AS_VERSION >= 23800
+	help
+	  Newer binutils versions default to ISA spec version 20191213 which
+	  moves some instructions from the I extension to the Zicsr and Zifencei
+	  extensions.
+
+config TOOLCHAIN_NEEDS_OLD_ISA_SPEC
+	def_bool y
+	depends on TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI
+	# https://github.com/llvm/llvm-project/commit/22e199e6afb1263c943c0c0d4498694e15bf8a16
+	depends on CC_IS_CLANG && CLANG_VERSION < 170000
+	help
+	  Certain versions of clang do not support zicsr and zifencei via -march
+	  but newer versions of binutils require it for the reasons noted in the
+	  help text of CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI. This
+	  option causes an older ISA spec compatible with these older versions
+	  of clang to be passed to GAS, which has the same result as passing zicsr
+	  and zifencei to -march.
+
 config FPU
 	bool "FPU support"
 	default y
diff --git a/arch/riscv/Kconfig.erratas b/arch/riscv/Kconfig.erratas
index 69621ae6d647..0c8f4652cd82 100644
--- a/arch/riscv/Kconfig.erratas
+++ b/arch/riscv/Kconfig.erratas
@@ -2,8 +2,7 @@ menu "CPU errata selection"
 
 config ERRATA_SIFIVE
 	bool "SiFive errata"
-	depends on !XIP_KERNEL
-	select RISCV_ALTERNATIVE
+	depends on RISCV_ALTERNATIVE
 	help
 	  All SiFive errata Kconfig depend on this Kconfig. Disabling
 	  this Kconfig will disable all SiFive errata. Please say "Y"
@@ -35,8 +34,7 @@ config ERRATA_SIFIVE_CIP_1200
 
 config ERRATA_THEAD
 	bool "T-HEAD errata"
-	depends on !XIP_KERNEL
-	select RISCV_ALTERNATIVE
+	depends on RISCV_ALTERNATIVE
 	help
 	  All T-HEAD errata Kconfig depend on this Kconfig. Disabling
 	  this Kconfig will disable all T-HEAD errata. Please say "Y"
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 4de83b9b1772..b05e833a022d 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -57,10 +57,12 @@ riscv-march-$(CONFIG_ARCH_RV64I)	:= rv64ima
 riscv-march-$(CONFIG_FPU)		:= $(riscv-march-y)fd
 riscv-march-$(CONFIG_RISCV_ISA_C)	:= $(riscv-march-y)c
 
-# Newer binutils versions default to ISA spec version 20191213 which moves some
-# instructions from the I extension to the Zicsr and Zifencei extensions.
-toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei)
-riscv-march-$(toolchain-need-zicsr-zifencei) := $(riscv-march-y)_zicsr_zifencei
+ifdef CONFIG_TOOLCHAIN_NEEDS_OLD_ISA_SPEC
+KBUILD_CFLAGS += -Wa,-misa-spec=2.2
+KBUILD_AFLAGS += -Wa,-misa-spec=2.2
+else
+riscv-march-$(CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI) := $(riscv-march-y)_zicsr_zifencei
+endif
 
 # Check if the toolchain supports Zihintpause extension
 riscv-march-$(CONFIG_TOOLCHAIN_HAS_ZIHINTPAUSE) := $(riscv-march-y)_zihintpause
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
index a0769185be97..4ed33c1e7c9c 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
@@ -1,6 +1,25 @@
 // SPDX-License-Identifier: (GPL-2.0+ or MIT)
 // Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
 
+/*
+ * gpio line names
+ *
+ * The Nezha-D1 has a 40-pin IO header. Some of these pins are routed
+ * directly to pads on the SoC, others come from an 8-bit pcf857x IO
+ * expander. Therefore, these line names are specified in two places:
+ * one set for the pcf857x, and one set for the pio controller.
+ *
+ * Lines which are routed to the 40-pin header are named as follows:
+ *	<pin#> [<pin name>]
+ * where:
+ *	<pin#>		is the actual pin number of the 40-pin header
+ *	<pin name>	is the name of the pin by function/gpio#
+ *
+ * For details regarding pin numbers and names see the schematics (under
+ * "IO EXPAND"):
+ * http://dl.linux-sunxi.org/D1/D1_Nezha_development_board_schematic_diagram_20210224.pdf
+ */
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
@@ -90,6 +109,15 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		gpio-line-names =
+			"pin13 [gpio8]",
+			"pin16 [gpio10]",
+			"pin18 [gpio11]",
+			"pin26 [gpio17]",
+			"pin22 [gpio14]",
+			"pin28 [gpio19]",
+			"pin37 [gpio23]",
+			"pin11 [gpio6]";
 	};
 };
 
@@ -164,3 +192,47 @@
 	usb1_vbus-supply = <&reg_vcc>;
 	status = "okay";
 };
+
+&pio {
+	gpio-line-names =
+		/* Port A */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* Port B */
+		"pin5 [gpio2/twi2-sck]",
+		"pin3 [gpio1/twi2-sda]",
+		"",
+		"pin38 [gpio24/i2s2-din]",
+		"pin40 [gpio25/i2s2-dout]",
+		"pin12 [gpio7/i2s-clk]",
+		"pin35 [gpio22/i2s2-lrck]",
+		"",
+		"pin8 [gpio4/uart0-txd]",
+		"pin10 [gpio5/uart0-rxd]",
+		"",
+		"",
+		"pin15 [gpio9]",
+		"", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* Port C */
+		"",
+		"pin31 [gpio21]",
+		"", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* Port D */
+		"", "", "", "", "", "", "", "",
+		"", "",
+		"pin24 [gpio16/spi1-ce0]",
+		"pin23 [gpio15/spi1-clk]",
+		"pin19 [gpio12/spi1-mosi]",
+		"pin21 [gpio13/spi1-miso]",
+		"pin27 [gpio18/spi1-hold]",
+		"pin29 [gpio20/spi1-wp]",
+		"", "", "", "", "", "",
+		"pin7 [gpio3/pwm]";
+};
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 6fadcee7800f..922e8e0e2c09 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -211,7 +211,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 14>, <&dma 14>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -224,7 +224,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 15>, <&dma 15>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -237,7 +237,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 16>, <&dma 16>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -250,7 +250,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 17>, <&dma 17>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -263,7 +263,7 @@
 			clocks = <&ccu CLK_BUS_UART4>;
 			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 18>, <&dma 18>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -276,7 +276,7 @@
 			clocks = <&ccu CLK_BUS_UART5>;
 			resets = <&ccu RST_BUS_UART5>;
 			dmas = <&dma 19>, <&dma 19>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -367,6 +367,18 @@
 			#size-cells = <1>;
 		};
 
+		crypto: crypto@3040000 {
+			compatible = "allwinner,sun20i-d1-crypto";
+			reg = <0x3040000 0x800>;
+			interrupts = <SOC_PERIPHERAL_IRQ(52) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>,
+				 <&ccu CLK_CE>,
+				 <&ccu CLK_MBUS_CE>,
+				 <&rtc CLK_IOSC>;
+			clock-names = "bus", "mod", "ram", "trng";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
 		mbus: dram-controller@3102000 {
 			compatible = "allwinner,sun20i-d1-mbus";
 			reg = <0x3102000 0x1000>,
diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
index 07e2e2649604..f87c5164d9cf 100644
--- a/arch/riscv/boot/dts/canaan/k210.dtsi
+++ b/arch/riscv/boot/dts/canaan/k210.dtsi
@@ -259,7 +259,6 @@
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "ssi_clk", "pclk";
 				resets = <&sysrst K210_RST_SPI2>;
-				spi-max-frequency = <25000000>;
 			};
 
 			i2s0: i2s@50250000 {
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 0a9bb84af438..104504352e99 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -234,6 +234,7 @@
 			reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
 			clocks = <&refclk>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		ccc_se: clock-controller@38010000 {
@@ -415,7 +416,7 @@
 		};
 
 		mac0: ethernet@20110000 {
-			compatible = "cdns,macb";
+			compatible = "microchip,mpfs-macb", "cdns,macb";
 			reg = <0x0 0x20110000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -424,11 +425,12 @@
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
+			resets = <&clkcfg CLK_MAC0>;
 			status = "disabled";
 		};
 
 		mac1: ethernet@20112000 {
-			compatible = "cdns,macb";
+			compatible = "microchip,mpfs-macb", "cdns,macb";
 			reg = <0x0 0x20112000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -437,6 +439,7 @@
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
+			resets = <&clkcfg CLK_MAC1>;
 			status = "disabled";
 		};
 
@@ -498,7 +501,8 @@
 
 		mbox: mailbox@37020000 {
 			compatible = "microchip,mpfs-mailbox";
-			reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>;
+			reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
+			      <0x0 0x37020800 0x0 0x100>;
 			interrupt-parent = <&plic>;
 			interrupts = <96>;
 			#mbox-cells = <1>;
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 7b00a48580ca..170956846d49 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -1,2 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
+
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
new file mode 100644
index 000000000000..fb0139b56723
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
@@ -0,0 +1,308 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#ifndef __JH7110_PINFUNC_H__
+#define __JH7110_PINFUNC_H__
+
+/*
+ * mux bits:
+ *  | 31 - 24 | 23 - 16 | 15 - 10 |  9 - 8   |  7 - 0  |
+ *  |  din    |  dout   |  doen   | function | gpio nr |
+ *
+ * dout:     output signal
+ * doen:     output enable signal
+ * din:      optional input signal, 0xff = none
+ * function: function selector
+ * gpio nr:  gpio number, 0 - 63
+ */
+#define GPIOMUX(n, dout, doen, din) ( \
+		(((din)  & 0xff) << 24) | \
+		(((dout) & 0xff) << 16) | \
+		(((doen) & 0x3f) << 10) | \
+		((n) & 0x3f))
+
+#define PINMUX(n, func) ((1 << 10) | (((func) & 0x3) << 8) | ((n) & 0xff))
+
+/* sys_iomux dout */
+#define GPOUT_LOW				0
+#define GPOUT_HIGH				1
+#define GPOUT_SYS_WAVE511_UART_TX		2
+#define GPOUT_SYS_CAN0_STBY			3
+#define GPOUT_SYS_CAN0_TST_NEXT_BIT		4
+#define GPOUT_SYS_CAN0_TST_SAMPLE_POINT		5
+#define GPOUT_SYS_CAN0_TXD			6
+#define GPOUT_SYS_USB_DRIVE_VBUS		7
+#define GPOUT_SYS_QSPI_CS1			8
+#define GPOUT_SYS_SPDIF				9
+#define GPOUT_SYS_HDMI_CEC_SDA			10
+#define GPOUT_SYS_HDMI_DDC_SCL			11
+#define GPOUT_SYS_HDMI_DDC_SDA			12
+#define GPOUT_SYS_WATCHDOG			13
+#define GPOUT_SYS_I2C0_CLK			14
+#define GPOUT_SYS_I2C0_DATA			15
+#define GPOUT_SYS_SDIO0_BACK_END_POWER		16
+#define GPOUT_SYS_SDIO0_CARD_POWER_EN		17
+#define GPOUT_SYS_SDIO0_CCMD_OD_PULLUP_EN	18
+#define GPOUT_SYS_SDIO0_RST			19
+#define GPOUT_SYS_UART0_TX			20
+#define GPOUT_SYS_HIFI4_JTAG_TDO		21
+#define GPOUT_SYS_JTAG_TDO			22
+#define GPOUT_SYS_PDM_MCLK			23
+#define GPOUT_SYS_PWM_CHANNEL0			24
+#define GPOUT_SYS_PWM_CHANNEL1			25
+#define GPOUT_SYS_PWM_CHANNEL2			26
+#define GPOUT_SYS_PWM_CHANNEL3			27
+#define GPOUT_SYS_PWMDAC_LEFT			28
+#define GPOUT_SYS_PWMDAC_RIGHT			29
+#define GPOUT_SYS_SPI0_CLK			30
+#define GPOUT_SYS_SPI0_FSS			31
+#define GPOUT_SYS_SPI0_TXD			32
+#define GPOUT_SYS_GMAC_PHYCLK			33
+#define GPOUT_SYS_I2SRX_BCLK			34
+#define GPOUT_SYS_I2SRX_LRCK			35
+#define GPOUT_SYS_I2STX0_BCLK			36
+#define GPOUT_SYS_I2STX0_LRCK			37
+#define GPOUT_SYS_MCLK				38
+#define GPOUT_SYS_TDM_CLK			39
+#define GPOUT_SYS_TDM_SYNC			40
+#define GPOUT_SYS_TDM_TXD			41
+#define GPOUT_SYS_TRACE_DATA0			42
+#define GPOUT_SYS_TRACE_DATA1			43
+#define GPOUT_SYS_TRACE_DATA2			44
+#define GPOUT_SYS_TRACE_DATA3			45
+#define GPOUT_SYS_TRACE_REF			46
+#define GPOUT_SYS_CAN1_STBY			47
+#define GPOUT_SYS_CAN1_TST_NEXT_BIT		48
+#define GPOUT_SYS_CAN1_TST_SAMPLE_POINT		49
+#define GPOUT_SYS_CAN1_TXD			50
+#define GPOUT_SYS_I2C1_CLK			51
+#define GPOUT_SYS_I2C1_DATA			52
+#define GPOUT_SYS_SDIO1_BACK_END_POWER		53
+#define GPOUT_SYS_SDIO1_CARD_POWER_EN		54
+#define GPOUT_SYS_SDIO1_CLK			55
+#define GPOUT_SYS_SDIO1_CMD_OD_PULLUP_EN	56
+#define GPOUT_SYS_SDIO1_CMD			57
+#define GPOUT_SYS_SDIO1_DATA0			58
+#define GPOUT_SYS_SDIO1_DATA1			59
+#define GPOUT_SYS_SDIO1_DATA2			60
+#define GPOUT_SYS_SDIO1_DATA3			61
+#define GPOUT_SYS_SDIO1_DATA4			63
+#define GPOUT_SYS_SDIO1_DATA5			63
+#define GPOUT_SYS_SDIO1_DATA6			64
+#define GPOUT_SYS_SDIO1_DATA7			65
+#define GPOUT_SYS_SDIO1_RST			66
+#define GPOUT_SYS_UART1_RTS			67
+#define GPOUT_SYS_UART1_TX			68
+#define GPOUT_SYS_I2STX1_SDO0			69
+#define GPOUT_SYS_I2STX1_SDO1			70
+#define GPOUT_SYS_I2STX1_SDO2			71
+#define GPOUT_SYS_I2STX1_SDO3			72
+#define GPOUT_SYS_SPI1_CLK			73
+#define GPOUT_SYS_SPI1_FSS			74
+#define GPOUT_SYS_SPI1_TXD			75
+#define GPOUT_SYS_I2C2_CLK			76
+#define GPOUT_SYS_I2C2_DATA			77
+#define GPOUT_SYS_UART2_RTS			78
+#define GPOUT_SYS_UART2_TX			79
+#define GPOUT_SYS_SPI2_CLK			80
+#define GPOUT_SYS_SPI2_FSS			81
+#define GPOUT_SYS_SPI2_TXD			82
+#define GPOUT_SYS_I2C3_CLK			83
+#define GPOUT_SYS_I2C3_DATA			84
+#define GPOUT_SYS_UART3_TX			85
+#define GPOUT_SYS_SPI3_CLK			86
+#define GPOUT_SYS_SPI3_FSS			87
+#define GPOUT_SYS_SPI3_TXD			88
+#define GPOUT_SYS_I2C4_CLK			89
+#define GPOUT_SYS_I2C4_DATA			90
+#define GPOUT_SYS_UART4_RTS			91
+#define GPOUT_SYS_UART4_TX			92
+#define GPOUT_SYS_SPI4_CLK			93
+#define GPOUT_SYS_SPI4_FSS			94
+#define GPOUT_SYS_SPI4_TXD			95
+#define GPOUT_SYS_I2C5_CLK			96
+#define GPOUT_SYS_I2C5_DATA			97
+#define GPOUT_SYS_UART5_RTS			98
+#define GPOUT_SYS_UART5_TX			99
+#define GPOUT_SYS_SPI5_CLK			100
+#define GPOUT_SYS_SPI5_FSS			101
+#define GPOUT_SYS_SPI5_TXD			102
+#define GPOUT_SYS_I2C6_CLK			103
+#define GPOUT_SYS_I2C6_DATA			104
+#define GPOUT_SYS_SPI6_CLK			105
+#define GPOUT_SYS_SPI6_FSS			106
+#define GPOUT_SYS_SPI6_TXD			107
+
+/* aon_iomux dout */
+#define GPOUT_AON_CLK_32K_OUT			2
+#define GPOUT_AON_PTC0_PWM4			3
+#define GPOUT_AON_PTC0_PWM5			4
+#define GPOUT_AON_PTC0_PWM6			5
+#define GPOUT_AON_PTC0_PWM7			6
+#define GPOUT_AON_CLK_GCLK0			7
+#define GPOUT_AON_CLK_GCLK1			8
+#define GPOUT_AON_CLK_GCLK2			9
+
+/* sys_iomux doen */
+#define GPOEN_ENABLE				0
+#define GPOEN_DISABLE				1
+#define GPOEN_SYS_HDMI_CEC_SDA			2
+#define GPOEN_SYS_HDMI_DDC_SCL			3
+#define GPOEN_SYS_HDMI_DDC_SDA			4
+#define GPOEN_SYS_I2C0_CLK			5
+#define GPOEN_SYS_I2C0_DATA			6
+#define GPOEN_SYS_HIFI4_JTAG_TDO		7
+#define GPOEN_SYS_JTAG_TDO			8
+#define GPOEN_SYS_PWM0_CHANNEL0			9
+#define GPOEN_SYS_PWM0_CHANNEL1			10
+#define GPOEN_SYS_PWM0_CHANNEL2			11
+#define GPOEN_SYS_PWM0_CHANNEL3			12
+#define GPOEN_SYS_SPI0_NSSPCTL			13
+#define GPOEN_SYS_SPI0_NSSP			14
+#define GPOEN_SYS_TDM_SYNC			15
+#define GPOEN_SYS_TDM_TXD			16
+#define GPOEN_SYS_I2C1_CLK			17
+#define GPOEN_SYS_I2C1_DATA			18
+#define GPOEN_SYS_SDIO1_CMD			19
+#define GPOEN_SYS_SDIO1_DATA0			20
+#define GPOEN_SYS_SDIO1_DATA1			21
+#define GPOEN_SYS_SDIO1_DATA2			22
+#define GPOEN_SYS_SDIO1_DATA3			23
+#define GPOEN_SYS_SDIO1_DATA4			24
+#define GPOEN_SYS_SDIO1_DATA5			25
+#define GPOEN_SYS_SDIO1_DATA6			26
+#define GPOEN_SYS_SDIO1_DATA7			27
+#define GPOEN_SYS_SPI1_NSSPCTL			28
+#define GPOEN_SYS_SPI1_NSSP			29
+#define GPOEN_SYS_I2C2_CLK			30
+#define GPOEN_SYS_I2C2_DATA			31
+#define GPOEN_SYS_SPI2_NSSPCTL			32
+#define GPOEN_SYS_SPI2_NSSP			33
+#define GPOEN_SYS_I2C3_CLK			34
+#define GPOEN_SYS_I2C3_DATA			35
+#define GPOEN_SYS_SPI3_NSSPCTL			36
+#define GPOEN_SYS_SPI3_NSSP			37
+#define GPOEN_SYS_I2C4_CLK			38
+#define GPOEN_SYS_I2C4_DATA			39
+#define GPOEN_SYS_SPI4_NSSPCTL			40
+#define GPOEN_SYS_SPI4_NSSP			41
+#define GPOEN_SYS_I2C5_CLK			42
+#define GPOEN_SYS_I2C5_DATA			43
+#define GPOEN_SYS_SPI5_NSSPCTL			44
+#define GPOEN_SYS_SPI5_NSSP			45
+#define GPOEN_SYS_I2C6_CLK			46
+#define GPOEN_SYS_I2C6_DATA			47
+#define GPOEN_SYS_SPI6_NSSPCTL			48
+#define GPOEN_SYS_SPI6_NSSP			49
+
+/* aon_iomux doen */
+#define GPOEN_AON_PTC0_OE_N_4			2
+#define GPOEN_AON_PTC0_OE_N_5			3
+#define GPOEN_AON_PTC0_OE_N_6			4
+#define GPOEN_AON_PTC0_OE_N_7			5
+
+/* sys_iomux gin */
+#define GPI_NONE				255
+
+#define GPI_SYS_WAVE511_UART_RX			0
+#define GPI_SYS_CAN0_RXD			1
+#define GPI_SYS_USB_OVERCURRENT			2
+#define GPI_SYS_SPDIF				3
+#define GPI_SYS_JTAG_RST			4
+#define GPI_SYS_HDMI_CEC_SDA			5
+#define GPI_SYS_HDMI_DDC_SCL			6
+#define GPI_SYS_HDMI_DDC_SDA			7
+#define GPI_SYS_HDMI_HPD			8
+#define GPI_SYS_I2C0_CLK			9
+#define GPI_SYS_I2C0_DATA			10
+#define GPI_SYS_SDIO0_CD			11
+#define GPI_SYS_SDIO0_INT			12
+#define GPI_SYS_SDIO0_WP			13
+#define GPI_SYS_UART0_RX			14
+#define GPI_SYS_HIFI4_JTAG_TCK			15
+#define GPI_SYS_HIFI4_JTAG_TDI			16
+#define GPI_SYS_HIFI4_JTAG_TMS			17
+#define GPI_SYS_HIFI4_JTAG_RST			18
+#define GPI_SYS_JTAG_TDI			19
+#define GPI_SYS_JTAG_TMS			20
+#define GPI_SYS_PDM_DMIC0			21
+#define GPI_SYS_PDM_DMIC1			22
+#define GPI_SYS_I2SRX_SDIN0			23
+#define GPI_SYS_I2SRX_SDIN1			24
+#define GPI_SYS_I2SRX_SDIN2			25
+#define GPI_SYS_SPI0_CLK			26
+#define GPI_SYS_SPI0_FSS			27
+#define GPI_SYS_SPI0_RXD			28
+#define GPI_SYS_JTAG_TCK			29
+#define GPI_SYS_MCLK_EXT			30
+#define GPI_SYS_I2SRX_BCLK			31
+#define GPI_SYS_I2SRX_LRCK			32
+#define GPI_SYS_I2STX0_BCLK			33
+#define GPI_SYS_I2STX0_LRCK			34
+#define GPI_SYS_TDM_CLK				35
+#define GPI_SYS_TDM_RXD				36
+#define GPI_SYS_TDM_SYNC			37
+#define GPI_SYS_CAN1_RXD			38
+#define GPI_SYS_I2C1_CLK			39
+#define GPI_SYS_I2C1_DATA			40
+#define GPI_SYS_SDIO1_CD			41
+#define GPI_SYS_SDIO1_INT			42
+#define GPI_SYS_SDIO1_WP			43
+#define GPI_SYS_SDIO1_CMD			44
+#define GPI_SYS_SDIO1_DATA0			45
+#define GPI_SYS_SDIO1_DATA1			46
+#define GPI_SYS_SDIO1_DATA2			47
+#define GPI_SYS_SDIO1_DATA3			48
+#define GPI_SYS_SDIO1_DATA4			49
+#define GPI_SYS_SDIO1_DATA5			50
+#define GPI_SYS_SDIO1_DATA6			51
+#define GPI_SYS_SDIO1_DATA7			52
+#define GPI_SYS_SDIO1_STRB			53
+#define GPI_SYS_UART1_CTS			54
+#define GPI_SYS_UART1_RX			55
+#define GPI_SYS_SPI1_CLK			56
+#define GPI_SYS_SPI1_FSS			57
+#define GPI_SYS_SPI1_RXD			58
+#define GPI_SYS_I2C2_CLK			59
+#define GPI_SYS_I2C2_DATA			60
+#define GPI_SYS_UART2_CTS			61
+#define GPI_SYS_UART2_RX			62
+#define GPI_SYS_SPI2_CLK			63
+#define GPI_SYS_SPI2_FSS			64
+#define GPI_SYS_SPI2_RXD			65
+#define GPI_SYS_I2C3_CLK			66
+#define GPI_SYS_I2C3_DATA			67
+#define GPI_SYS_UART3_RX			68
+#define GPI_SYS_SPI3_CLK			69
+#define GPI_SYS_SPI3_FSS			70
+#define GPI_SYS_SPI3_RXD			71
+#define GPI_SYS_I2C4_CLK			72
+#define GPI_SYS_I2C4_DATA			73
+#define GPI_SYS_UART4_CTS			74
+#define GPI_SYS_UART4_RX			75
+#define GPI_SYS_SPI4_CLK			76
+#define GPI_SYS_SPI4_FSS			77
+#define GPI_SYS_SPI4_RXD			78
+#define GPI_SYS_I2C5_CLK			79
+#define GPI_SYS_I2C5_DATA			80
+#define GPI_SYS_UART5_CTS			81
+#define GPI_SYS_UART5_RX			82
+#define GPI_SYS_SPI5_CLK			83
+#define GPI_SYS_SPI5_FSS			84
+#define GPI_SYS_SPI5_RXD			85
+#define GPI_SYS_I2C6_CLK			86
+#define GPI_SYS_I2C6_DATA			87
+#define GPI_SYS_SPI6_CLK			88
+#define GPI_SYS_SPI6_FSS			89
+#define GPI_SYS_SPI6_RXD			90
+
+/* aon_iomux gin */
+#define GPI_AON_PMU_GPIO_WAKEUP_0		0
+#define GPI_AON_PMU_GPIO_WAKEUP_1		1
+#define GPI_AON_PMU_GPIO_WAKEUP_2		2
+#define GPI_AON_PMU_GPIO_WAKEUP_3		3
+
+#endif
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
new file mode 100644
index 000000000000..4af3300f3cf3
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110-starfive-visionfive-2.dtsi"
+
+/ {
+	model = "StarFive VisionFive 2 v1.2A";
+	compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
new file mode 100644
index 000000000000..9230cc3d8946
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110-starfive-visionfive-2.dtsi"
+
+/ {
+	model = "StarFive VisionFive 2 v1.3B";
+	compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
new file mode 100644
index 000000000000..2a6d81609284
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110.dtsi"
+#include "jh7110-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <4000000>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x1 0x0>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
+		priority = <224>;
+	};
+};
+
+&gmac0_rgmii_rxin {
+	clock-frequency = <125000000>;
+};
+
+&gmac0_rmii_refin {
+	clock-frequency = <50000000>;
+};
+
+&gmac1_rgmii_rxin {
+	clock-frequency = <125000000>;
+};
+
+&gmac1_rmii_refin {
+	clock-frequency = <50000000>;
+};
+
+&i2srx_bclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&i2srx_lrck_ext {
+	clock-frequency = <192000>;
+};
+
+&i2stx_bclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&i2stx_lrck_ext {
+	clock-frequency = <192000>;
+};
+
+&mclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&osc {
+	clock-frequency = <24000000>;
+};
+
+&rtc_osc {
+	clock-frequency = <32768>;
+};
+
+&tdm_ext {
+	clock-frequency = <49152000>;
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+};
+
+&sysgpio {
+	i2c0_pins: i2c0-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(57, GPOUT_LOW,
+					      GPOEN_SYS_I2C0_CLK,
+					      GPI_SYS_I2C0_CLK)>,
+				 <GPIOMUX(58, GPOUT_LOW,
+					      GPOEN_SYS_I2C0_DATA,
+					      GPI_SYS_I2C0_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(3, GPOUT_LOW,
+					     GPOEN_SYS_I2C2_CLK,
+					     GPI_SYS_I2C2_CLK)>,
+				 <GPIOMUX(2, GPOUT_LOW,
+					     GPOEN_SYS_I2C2_DATA,
+					     GPI_SYS_I2C2_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c5_pins: i2c5-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(19, GPOUT_LOW,
+					      GPOEN_SYS_I2C5_CLK,
+					      GPI_SYS_I2C5_CLK)>,
+				 <GPIOMUX(20, GPOUT_LOW,
+					      GPOEN_SYS_I2C5_DATA,
+					      GPI_SYS_I2C5_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c6_pins: i2c6-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(16, GPOUT_LOW,
+					      GPOEN_SYS_I2C6_CLK,
+					      GPI_SYS_I2C6_CLK)>,
+				 <GPIOMUX(17, GPOUT_LOW,
+					      GPOEN_SYS_I2C6_DATA,
+					      GPI_SYS_I2C6_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	uart0_pins: uart0-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+					     GPOEN_ENABLE,
+					     GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(6, GPOUT_LOW,
+					     GPOEN_DISABLE,
+					     GPI_SYS_UART0_RX)>;
+			bias-disable; /* external pull-up */
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 000000000000..4c5fdb905da8
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive,jh7110-crg.h>
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+/ {
+	compatible = "starfive,jh7110";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		S7_0: cpu@0 {
+			compatible = "sifive,s7", "riscv";
+			reg = <0>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <16384>;
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imac_zba_zbb";
+			status = "disabled";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_1: cpu@1 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <1>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zba_zbb";
+			tlb-split;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_2: cpu@2 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <2>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zba_zbb";
+			tlb-split;
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_3: cpu@3 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <3>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zba_zbb";
+			tlb-split;
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_4: cpu@4 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <4>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zba_zbb";
+			tlb-split;
+
+			cpu4_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&S7_0>;
+				};
+
+				core1 {
+					cpu = <&U74_1>;
+				};
+
+				core2 {
+					cpu = <&U74_2>;
+				};
+
+				core3 {
+					cpu = <&U74_3>;
+				};
+
+				core4 {
+					cpu = <&U74_4>;
+				};
+			};
+		};
+	};
+
+	gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac0_rgmii_rxin";
+		#clock-cells = <0>;
+	};
+
+	gmac0_rmii_refin: gmac0-rmii-refin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac0_rmii_refin";
+		#clock-cells = <0>;
+	};
+
+	gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac1_rgmii_rxin";
+		#clock-cells = <0>;
+	};
+
+	gmac1_rmii_refin: gmac1-rmii-refin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac1_rmii_refin";
+		#clock-cells = <0>;
+	};
+
+	i2srx_bclk_ext: i2srx-bclk-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2srx_bclk_ext";
+		#clock-cells = <0>;
+	};
+
+	i2srx_lrck_ext: i2srx-lrck-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2srx_lrck_ext";
+		#clock-cells = <0>;
+	};
+
+	i2stx_bclk_ext: i2stx-bclk-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2stx_bclk_ext";
+		#clock-cells = <0>;
+	};
+
+	i2stx_lrck_ext: i2stx-lrck-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2stx_lrck_ext";
+		#clock-cells = <0>;
+	};
+
+	mclk_ext: mclk-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "mclk_ext";
+		#clock-cells = <0>;
+	};
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc";
+		#clock-cells = <0>;
+	};
+
+	rtc_osc: rtc-oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "rtc_osc";
+		#clock-cells = <0>;
+	};
+
+	tdm_ext: tdm-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "tdm_ext";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clint: timer@2000000 {
+			compatible = "starfive,jh7110-clint", "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>;
+		};
+
+		ccache: cache-controller@2010000 {
+			compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
+			reg = <0x0 0x2010000 0x0 0x4000>;
+			interrupts = <1>, <3>, <4>, <2>;
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
+		};
+
+		plic: interrupt-controller@c000000 {
+			compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			riscv,ndev = <136>;
+		};
+
+		uart0: serial@10000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10000000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART0_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+			interrupts = <32>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart1: serial@10010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10010000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART1_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+			interrupts = <33>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart2: serial@10020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10020000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART2_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+			interrupts = <34>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@10030000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10030000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C0_APB>;
+			interrupts = <35>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10040000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C1_APB>;
+			interrupts = <36>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10050000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10050000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C2_APB>;
+			interrupts = <37>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		uart3: serial@12000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12000000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART3_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+			interrupts = <45>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart4: serial@12010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12010000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART4_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+			interrupts = <46>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart5: serial@12020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12020000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART5_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+			interrupts = <47>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@12030000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12030000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C3_APB>;
+			interrupts = <48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@12040000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C4_APB>;
+			interrupts = <49>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@12050000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12050000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C5_APB>;
+			interrupts = <50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@12060000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12060000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C6_APB>;
+			interrupts = <51>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		syscrg: clock-controller@13020000 {
+			compatible = "starfive,jh7110-syscrg";
+			reg = <0x0 0x13020000 0x0 0x10000>;
+			clocks = <&osc>, <&gmac1_rmii_refin>,
+				 <&gmac1_rgmii_rxin>,
+				 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+				 <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+				 <&tdm_ext>, <&mclk_ext>;
+			clock-names = "osc", "gmac1_rmii_refin",
+				      "gmac1_rgmii_rxin",
+				      "i2stx_bclk_ext", "i2stx_lrck_ext",
+				      "i2srx_bclk_ext", "i2srx_lrck_ext",
+				      "tdm_ext", "mclk_ext";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		sysgpio: pinctrl@13040000 {
+			compatible = "starfive,jh7110-sys-pinctrl";
+			reg = <0x0 0x13040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>;
+			resets = <&syscrg JH7110_SYSRST_IOMUX_APB>;
+			interrupts = <86>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		aoncrg: clock-controller@17000000 {
+			compatible = "starfive,jh7110-aoncrg";
+			reg = <0x0 0x17000000 0x0 0x10000>;
+			clocks = <&osc>, <&gmac0_rmii_refin>,
+				 <&gmac0_rgmii_rxin>,
+				 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+				 <&syscrg JH7110_SYSCLK_APB_BUS>,
+				 <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
+				 <&rtc_osc>;
+			clock-names = "osc", "gmac0_rmii_refin",
+				      "gmac0_rgmii_rxin", "stg_axiahb",
+				      "apb_bus", "gmac0_gtxclk",
+				      "rtc_osc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		aongpio: pinctrl@17020000 {
+			compatible = "starfive,jh7110-aon-pinctrl";
+			reg = <0x0 0x17020000 0x0 0x10000>;
+			resets = <&aoncrg JH7110_AONRST_IOMUX>;
+			interrupts = <85>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git a/arch/riscv/configs/nommu_k210_defconfig b/arch/riscv/configs/nommu_k210_defconfig
index 79b3ccd58ff0..e36fffd6fb18 100644
--- a/arch/riscv/configs/nommu_k210_defconfig
+++ b/arch/riscv/configs/nommu_k210_defconfig
@@ -1,6 +1,5 @@
 # CONFIG_CPU_ISOLATION is not set
 CONFIG_LOG_BUF_SHIFT=13
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_GZIP is not set
 # CONFIG_RD_BZIP2 is not set
diff --git a/arch/riscv/configs/nommu_k210_sdcard_defconfig b/arch/riscv/configs/nommu_k210_sdcard_defconfig
index 6b80bb13b8ed..c1ad85f0a4f7 100644
--- a/arch/riscv/configs/nommu_k210_sdcard_defconfig
+++ b/arch/riscv/configs/nommu_k210_sdcard_defconfig
@@ -1,6 +1,5 @@
 # CONFIG_CPU_ISOLATION is not set
 CONFIG_LOG_BUF_SHIFT=13
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_FHANDLE is not set
diff --git a/arch/riscv/configs/nommu_virt_defconfig b/arch/riscv/configs/nommu_virt_defconfig
index 4cf0f297091e..b794e2f8144e 100644
--- a/arch/riscv/configs/nommu_virt_defconfig
+++ b/arch/riscv/configs/nommu_virt_defconfig
@@ -1,6 +1,5 @@
 # CONFIG_CPU_ISOLATION is not set
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h
index 5c3e7b97fcc6..0a55099bb734 100644
--- a/arch/riscv/include/asm/fixmap.h
+++ b/arch/riscv/include/asm/fixmap.h
@@ -22,6 +22,14 @@
  */
 enum fixed_addresses {
 	FIX_HOLE,
+	/*
+	 * The fdt fixmap mapping must be PMD aligned and will be mapped
+	 * using PMD entries in fixmap_pmd in 64-bit and a PGD entry in 32-bit.
+	 */
+	FIX_FDT_END,
+	FIX_FDT = FIX_FDT_END + FIX_FDT_SIZE / PAGE_SIZE - 1,
+
+	/* Below fixmaps will be mapped using fixmap_pte */
 	FIX_PTE,
 	FIX_PMD,
 	FIX_PUD,
diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h
index e3021b2590de..6263a0de1c6a 100644
--- a/arch/riscv/include/asm/hwcap.h
+++ b/arch/riscv/include/asm/hwcap.h
@@ -57,18 +57,31 @@ struct riscv_isa_ext_data {
 	unsigned int isa_ext_id;
 };
 
+unsigned long riscv_isa_extension_base(const unsigned long *isa_bitmap);
+
+#define riscv_isa_extension_mask(ext) BIT_MASK(RISCV_ISA_EXT_##ext)
+
+bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, int bit);
+#define riscv_isa_extension_available(isa_bitmap, ext)	\
+	__riscv_isa_extension_available(isa_bitmap, RISCV_ISA_EXT_##ext)
+
 static __always_inline bool
 riscv_has_extension_likely(const unsigned long ext)
 {
 	compiletime_assert(ext < RISCV_ISA_EXT_MAX,
 			   "ext must be < RISCV_ISA_EXT_MAX");
 
-	asm_volatile_goto(
-	ALTERNATIVE("j	%l[l_no]", "nop", 0, %[ext], 1)
-	:
-	: [ext] "i" (ext)
-	:
-	: l_no);
+	if (IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
+		asm_volatile_goto(
+		ALTERNATIVE("j	%l[l_no]", "nop", 0, %[ext], 1)
+		:
+		: [ext] "i" (ext)
+		:
+		: l_no);
+	} else {
+		if (!__riscv_isa_extension_available(NULL, ext))
+			goto l_no;
+	}
 
 	return true;
 l_no:
@@ -81,26 +94,23 @@ riscv_has_extension_unlikely(const unsigned long ext)
 	compiletime_assert(ext < RISCV_ISA_EXT_MAX,
 			   "ext must be < RISCV_ISA_EXT_MAX");
 
-	asm_volatile_goto(
-	ALTERNATIVE("nop", "j	%l[l_yes]", 0, %[ext], 1)
-	:
-	: [ext] "i" (ext)
-	:
-	: l_yes);
+	if (IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
+		asm_volatile_goto(
+		ALTERNATIVE("nop", "j	%l[l_yes]", 0, %[ext], 1)
+		:
+		: [ext] "i" (ext)
+		:
+		: l_yes);
+	} else {
+		if (__riscv_isa_extension_available(NULL, ext))
+			goto l_yes;
+	}
 
 	return false;
 l_yes:
 	return true;
 }
 
-unsigned long riscv_isa_extension_base(const unsigned long *isa_bitmap);
-
-#define riscv_isa_extension_mask(ext) BIT_MASK(RISCV_ISA_EXT_##ext)
-
-bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, int bit);
-#define riscv_isa_extension_available(isa_bitmap, ext)	\
-	__riscv_isa_extension_available(isa_bitmap, RISCV_ISA_EXT_##ext)
-
 #endif
 
 #endif /* _ASM_RISCV_HWCAP_H */
diff --git a/arch/riscv/include/asm/irq.h b/arch/riscv/include/asm/irq.h
index e4c435509983..43b9ebfbd943 100644
--- a/arch/riscv/include/asm/irq.h
+++ b/arch/riscv/include/asm/irq.h
@@ -12,6 +12,10 @@
 
 #include <asm-generic/irq.h>
 
+void riscv_set_intc_hwnode_fn(struct fwnode_handle *(*fn)(void));
+
+struct fwnode_handle *riscv_get_intc_hwnode(void);
+
 extern void __init init_IRQ(void);
 
 #endif /* _ASM_RISCV_IRQ_H */
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index ab05f892d317..f641837ccf31 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -87,9 +87,13 @@
 
 #define FIXADDR_TOP      PCI_IO_START
 #ifdef CONFIG_64BIT
-#define FIXADDR_SIZE     PMD_SIZE
+#define MAX_FDT_SIZE	 PMD_SIZE
+#define FIX_FDT_SIZE	 (MAX_FDT_SIZE + SZ_2M)
+#define FIXADDR_SIZE     (PMD_SIZE + FIX_FDT_SIZE)
 #else
-#define FIXADDR_SIZE     PGDIR_SIZE
+#define MAX_FDT_SIZE	 PGDIR_SIZE
+#define FIX_FDT_SIZE	 MAX_FDT_SIZE
+#define FIXADDR_SIZE     (PGDIR_SIZE + FIX_FDT_SIZE)
 #endif
 #define FIXADDR_START    (FIXADDR_TOP - FIXADDR_SIZE)
 
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 945b7be249c1..acab4410ef2a 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -271,8 +271,7 @@ long sbi_get_marchid(void);
 long sbi_get_mimpid(void);
 void sbi_set_timer(uint64_t stime_value);
 void sbi_shutdown(void);
-void sbi_clear_ipi(void);
-int sbi_send_ipi(const struct cpumask *cpu_mask);
+void sbi_send_ipi(unsigned int cpu);
 int sbi_remote_fence_i(const struct cpumask *cpu_mask);
 int sbi_remote_sfence_vma(const struct cpumask *cpu_mask,
 			   unsigned long start,
@@ -335,4 +334,10 @@ unsigned long riscv_cached_mvendorid(unsigned int cpu_id);
 unsigned long riscv_cached_marchid(unsigned int cpu_id);
 unsigned long riscv_cached_mimpid(unsigned int cpu_id);
 
+#if IS_ENABLED(CONFIG_SMP) && IS_ENABLED(CONFIG_RISCV_SBI)
+void sbi_ipi_init(void);
+#else
+static inline void sbi_ipi_init(void) { }
+#endif
+
 #endif /* _ASM_RISCV_SBI_H */
diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 3831b638ecab..c4b77017ec58 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -15,12 +15,10 @@
 struct seq_file;
 extern unsigned long boot_cpu_hartid;
 
-struct riscv_ipi_ops {
-	void (*ipi_inject)(const struct cpumask *target);
-	void (*ipi_clear)(void);
-};
-
 #ifdef CONFIG_SMP
+
+#include <linux/jump_label.h>
+
 /*
  * Mapping between linux logical cpu index and hartid.
  */
@@ -33,9 +31,6 @@ void show_ipi_stats(struct seq_file *p, int prec);
 /* SMP initialization hook for setup_arch */
 void __init setup_smp(void);
 
-/* Called from C code, this handles an IPI. */
-void handle_IPI(struct pt_regs *regs);
-
 /* Hook for the generic smp_call_function_many() routine. */
 void arch_send_call_function_ipi_mask(struct cpumask *mask);
 
@@ -44,11 +39,22 @@ void arch_send_call_function_single_ipi(int cpu);
 
 int riscv_hartid_to_cpuid(unsigned long hartid);
 
-/* Set custom IPI operations */
-void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops);
+/* Enable IPI for CPU hotplug */
+void riscv_ipi_enable(void);
+
+/* Disable IPI for CPU hotplug */
+void riscv_ipi_disable(void);
 
-/* Clear IPI for current CPU */
-void riscv_clear_ipi(void);
+/* Check if IPI interrupt numbers are available */
+bool riscv_ipi_have_virq_range(void);
+
+/* Set the IPI interrupt numbers for arch (called by irqchip drivers) */
+void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence);
+
+/* Check if we can use IPIs for remote FENCEs */
+DECLARE_STATIC_KEY_FALSE(riscv_ipi_for_rfence);
+#define riscv_use_ipi_for_rfence() \
+	static_branch_unlikely(&riscv_ipi_for_rfence)
 
 /* Check other CPUs stop or not */
 bool smp_crash_stop_failed(void);
@@ -85,14 +91,29 @@ static inline unsigned long cpuid_to_hartid_map(int cpu)
 	return boot_cpu_hartid;
 }
 
-static inline void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
+static inline void riscv_ipi_enable(void)
+{
+}
+
+static inline void riscv_ipi_disable(void)
 {
 }
 
-static inline void riscv_clear_ipi(void)
+static inline bool riscv_ipi_have_virq_range(void)
+{
+	return false;
+}
+
+static inline void riscv_ipi_set_virq_range(int virq, int nr,
+					    bool use_for_rfence)
 {
 }
 
+static inline bool riscv_use_ipi_for_rfence(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP)
diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h
index 801019381dea..a09196f8de68 100644
--- a/arch/riscv/include/asm/tlbflush.h
+++ b/arch/riscv/include/asm/tlbflush.h
@@ -12,6 +12,8 @@
 #include <asm/errata_list.h>
 
 #ifdef CONFIG_MMU
+extern unsigned long asid_mask;
+
 static inline void local_flush_tlb_all(void)
 {
 	__asm__ __volatile__ ("sfence.vma" : : : "memory");
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 4cf303a779ab..67f542be1bea 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
 obj-$(CONFIG_HAVE_PERF_REGS)	+= perf_regs.o
 obj-$(CONFIG_RISCV_SBI)		+= sbi.o
 ifeq ($(CONFIG_RISCV_SBI), y)
+obj-$(CONFIG_SMP)		+= sbi-ipi.o
 obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
diff --git a/arch/riscv/kernel/cacheinfo.c b/arch/riscv/kernel/cacheinfo.c
index 3a13113f1b29..e3829d2de5d9 100644
--- a/arch/riscv/kernel/cacheinfo.c
+++ b/arch/riscv/kernel/cacheinfo.c
@@ -5,7 +5,6 @@
 
 #include <linux/cpu.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <asm/cacheinfo.h>
 
 static struct riscv_cacheinfo_ops *rv_cache_ops;
diff --git a/arch/riscv/kernel/cpu-hotplug.c b/arch/riscv/kernel/cpu-hotplug.c
index f7a832e3a1d1..a941adc7cbf2 100644
--- a/arch/riscv/kernel/cpu-hotplug.c
+++ b/arch/riscv/kernel/cpu-hotplug.c
@@ -13,7 +13,7 @@
 #include <asm/irq.h>
 #include <asm/cpu_ops.h>
 #include <asm/numa.h>
-#include <asm/sbi.h>
+#include <asm/smp.h>
 
 bool cpu_has_hotplug(unsigned int cpu)
 {
@@ -43,6 +43,7 @@ int __cpu_disable(void)
 	remove_cpu_topology(cpu);
 	numa_remove_cpu(cpu);
 	set_cpu_online(cpu, false);
+	riscv_ipi_disable();
 	irq_migrate_all_off_this_cpu();
 
 	return ret;
@@ -71,7 +72,7 @@ void __cpu_die(unsigned int cpu)
 /*
  * Called from the idle thread for the CPU which has been shutdown.
  */
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	idle_task_exit();
 
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 7207fa08d78f..eb9a68a539e6 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -7,8 +7,26 @@
 
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
 #include <linux/seq_file.h>
-#include <asm/smp.h>
+#include <asm/sbi.h>
+
+static struct fwnode_handle *(*__get_intc_node)(void);
+
+void riscv_set_intc_hwnode_fn(struct fwnode_handle *(*fn)(void))
+{
+	__get_intc_node = fn;
+}
+
+struct fwnode_handle *riscv_get_intc_hwnode(void)
+{
+	if (__get_intc_node)
+		return __get_intc_node();
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(riscv_get_intc_hwnode);
 
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
@@ -21,4 +39,5 @@ void __init init_IRQ(void)
 	irqchip_init();
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
+	sbi_ipi_init();
 }
diff --git a/arch/riscv/kernel/sbi-ipi.c b/arch/riscv/kernel/sbi-ipi.c
new file mode 100644
index 000000000000..a4559695ce62
--- /dev/null
+++ b/arch/riscv/kernel/sbi-ipi.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Multiplex several IPIs over a single HW IPI.
+ *
+ * Copyright (c) 2022 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "riscv: " fmt
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <asm/sbi.h>
+
+static int sbi_ipi_virq;
+
+static void sbi_ipi_handle(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(chip, desc);
+
+	csr_clear(CSR_IP, IE_SIE);
+	ipi_mux_process();
+
+	chained_irq_exit(chip, desc);
+}
+
+static int sbi_ipi_starting_cpu(unsigned int cpu)
+{
+	enable_percpu_irq(sbi_ipi_virq, irq_get_trigger_type(sbi_ipi_virq));
+	return 0;
+}
+
+void __init sbi_ipi_init(void)
+{
+	int virq;
+	struct irq_domain *domain;
+
+	if (riscv_ipi_have_virq_range())
+		return;
+
+	domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(),
+					  DOMAIN_BUS_ANY);
+	if (!domain) {
+		pr_err("unable to find INTC IRQ domain\n");
+		return;
+	}
+
+	sbi_ipi_virq = irq_create_mapping(domain, RV_IRQ_SOFT);
+	if (!sbi_ipi_virq) {
+		pr_err("unable to create INTC IRQ mapping\n");
+		return;
+	}
+
+	virq = ipi_mux_create(BITS_PER_BYTE, sbi_send_ipi);
+	if (virq <= 0) {
+		pr_err("unable to create muxed IPIs\n");
+		irq_dispose_mapping(sbi_ipi_virq);
+		return;
+	}
+
+	irq_set_chained_handler(sbi_ipi_virq, sbi_ipi_handle);
+
+	/*
+	 * Don't disable IPI when CPU goes offline because
+	 * the masking/unmasking of virtual IPIs is done
+	 * via generic IPI-Mux
+	 */
+	cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+			  "irqchip/sbi-ipi:starting",
+			  sbi_ipi_starting_cpu, NULL);
+
+	riscv_ipi_set_virq_range(virq, BITS_PER_BYTE, false);
+	pr_info("providing IPIs using SBI IPI extension\n");
+}
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 5c87db8fdff2..92b9b759ab3d 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -17,7 +17,7 @@ unsigned long sbi_spec_version __ro_after_init = SBI_SPEC_VERSION_DEFAULT;
 EXPORT_SYMBOL(sbi_spec_version);
 
 static void (*__sbi_set_timer)(uint64_t stime) __ro_after_init;
-static int (*__sbi_send_ipi)(const struct cpumask *cpu_mask) __ro_after_init;
+static void (*__sbi_send_ipi)(unsigned int cpu) __ro_after_init;
 static int (*__sbi_rfence)(int fid, const struct cpumask *cpu_mask,
 			   unsigned long start, unsigned long size,
 			   unsigned long arg4, unsigned long arg5) __ro_after_init;
@@ -131,17 +131,6 @@ void sbi_shutdown(void)
 EXPORT_SYMBOL(sbi_shutdown);
 
 /**
- * sbi_clear_ipi() - Clear any pending IPIs for the calling hart.
- *
- * Return: None
- */
-void sbi_clear_ipi(void)
-{
-	sbi_ecall(SBI_EXT_0_1_CLEAR_IPI, 0, 0, 0, 0, 0, 0, 0);
-}
-EXPORT_SYMBOL(sbi_clear_ipi);
-
-/**
  * __sbi_set_timer_v01() - Program the timer for next timer event.
  * @stime_value: The value after which next timer event should fire.
  *
@@ -157,17 +146,12 @@ static void __sbi_set_timer_v01(uint64_t stime_value)
 #endif
 }
 
-static int __sbi_send_ipi_v01(const struct cpumask *cpu_mask)
+static void __sbi_send_ipi_v01(unsigned int cpu)
 {
-	unsigned long hart_mask;
-
-	if (!cpu_mask || cpumask_empty(cpu_mask))
-		cpu_mask = cpu_online_mask;
-	hart_mask = __sbi_v01_cpumask_to_hartmask(cpu_mask);
-
+	unsigned long hart_mask =
+		__sbi_v01_cpumask_to_hartmask(cpumask_of(cpu));
 	sbi_ecall(SBI_EXT_0_1_SEND_IPI, 0, (unsigned long)(&hart_mask),
 		  0, 0, 0, 0, 0);
-	return 0;
 }
 
 static int __sbi_rfence_v01(int fid, const struct cpumask *cpu_mask,
@@ -216,12 +200,10 @@ static void __sbi_set_timer_v01(uint64_t stime_value)
 		sbi_major_version(), sbi_minor_version());
 }
 
-static int __sbi_send_ipi_v01(const struct cpumask *cpu_mask)
+static void __sbi_send_ipi_v01(unsigned int cpu)
 {
 	pr_warn("IPI extension is not available in SBI v%lu.%lu\n",
 		sbi_major_version(), sbi_minor_version());
-
-	return 0;
 }
 
 static int __sbi_rfence_v01(int fid, const struct cpumask *cpu_mask,
@@ -248,55 +230,18 @@ static void __sbi_set_timer_v02(uint64_t stime_value)
 #endif
 }
 
-static int __sbi_send_ipi_v02(const struct cpumask *cpu_mask)
+static void __sbi_send_ipi_v02(unsigned int cpu)
 {
-	unsigned long hartid, cpuid, hmask = 0, hbase = 0, htop = 0;
-	struct sbiret ret = {0};
 	int result;
+	struct sbiret ret = {0};
 
-	if (!cpu_mask || cpumask_empty(cpu_mask))
-		cpu_mask = cpu_online_mask;
-
-	for_each_cpu(cpuid, cpu_mask) {
-		hartid = cpuid_to_hartid_map(cpuid);
-		if (hmask) {
-			if (hartid + BITS_PER_LONG <= htop ||
-			    hbase + BITS_PER_LONG <= hartid) {
-				ret = sbi_ecall(SBI_EXT_IPI,
-						SBI_EXT_IPI_SEND_IPI, hmask,
-						hbase, 0, 0, 0, 0);
-				if (ret.error)
-					goto ecall_failed;
-				hmask = 0;
-			} else if (hartid < hbase) {
-				/* shift the mask to fit lower hartid */
-				hmask <<= hbase - hartid;
-				hbase = hartid;
-			}
-		}
-		if (!hmask) {
-			hbase = hartid;
-			htop = hartid;
-		} else if (hartid > htop) {
-			htop = hartid;
-		}
-		hmask |= BIT(hartid - hbase);
-	}
-
-	if (hmask) {
-		ret = sbi_ecall(SBI_EXT_IPI, SBI_EXT_IPI_SEND_IPI,
-				hmask, hbase, 0, 0, 0, 0);
-		if (ret.error)
-			goto ecall_failed;
+	ret = sbi_ecall(SBI_EXT_IPI, SBI_EXT_IPI_SEND_IPI,
+			1UL, cpuid_to_hartid_map(cpu), 0, 0, 0, 0);
+	if (ret.error) {
+		result = sbi_err_map_linux_errno(ret.error);
+		pr_err("%s: hbase = [%lu] failed (error [%d])\n",
+			__func__, cpuid_to_hartid_map(cpu), result);
 	}
-
-	return 0;
-
-ecall_failed:
-	result = sbi_err_map_linux_errno(ret.error);
-	pr_err("%s: hbase = [%lu] hmask = [0x%lx] failed (error [%d])\n",
-	       __func__, hbase, hmask, result);
-	return result;
 }
 
 static int __sbi_rfence_v02_call(unsigned long fid, unsigned long hmask,
@@ -410,13 +355,11 @@ void sbi_set_timer(uint64_t stime_value)
 
 /**
  * sbi_send_ipi() - Send an IPI to any hart.
- * @cpu_mask: A cpu mask containing all the target harts.
- *
- * Return: 0 on success, appropriate linux error code otherwise.
+ * @cpu: Logical id of the target CPU.
  */
-int sbi_send_ipi(const struct cpumask *cpu_mask)
+void sbi_send_ipi(unsigned int cpu)
 {
-	return __sbi_send_ipi(cpu_mask);
+	__sbi_send_ipi(cpu);
 }
 EXPORT_SYMBOL(sbi_send_ipi);
 
@@ -641,15 +584,6 @@ long sbi_get_mimpid(void)
 }
 EXPORT_SYMBOL_GPL(sbi_get_mimpid);
 
-static void sbi_send_cpumask_ipi(const struct cpumask *target)
-{
-	sbi_send_ipi(target);
-}
-
-static const struct riscv_ipi_ops sbi_ipi_ops = {
-	.ipi_inject = sbi_send_cpumask_ipi
-};
-
 void __init sbi_init(void)
 {
 	int ret;
@@ -696,6 +630,4 @@ void __init sbi_init(void)
 		__sbi_send_ipi	= __sbi_send_ipi_v01;
 		__sbi_rfence	= __sbi_rfence_v01;
 	}
-
-	riscv_set_ipi_ops(&sbi_ipi_ops);
 }
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 376d2827e736..3020f44dcf58 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -8,6 +8,7 @@
  *  Nick Kossifidis <mick@ics.forth.gr>
  */
 
+#include <linux/cpu.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/memblock.h>
@@ -15,7 +16,6 @@
 #include <linux/console.h>
 #include <linux/screen_info.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/sched/task.h>
 #include <linux/smp.h>
 #include <linux/efi.h>
@@ -278,12 +278,8 @@ void __init setup_arch(char **cmdline_p)
 #if IS_ENABLED(CONFIG_BUILTIN_DTB)
 	unflatten_and_copy_device_tree();
 #else
-	if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
-		unflatten_device_tree();
-	else
-		pr_err("No DTB found in kernel mappings\n");
+	unflatten_device_tree();
 #endif
-	early_init_fdt_scan_reserved_mem();
 	misc_mem_init();
 
 	init_resources();
diff --git a/arch/riscv/kernel/signal.c b/arch/riscv/kernel/signal.c
index bfb2afa4135f..dee66c9290cc 100644
--- a/arch/riscv/kernel/signal.c
+++ b/arch/riscv/kernel/signal.c
@@ -19,6 +19,7 @@
 #include <asm/signal32.h>
 #include <asm/switch_to.h>
 #include <asm/csr.h>
+#include <asm/cacheflush.h>
 
 extern u32 __user_rt_sigreturn[2];
 
@@ -181,6 +182,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 {
 	struct rt_sigframe __user *frame;
 	long err = 0;
+	unsigned long __maybe_unused addr;
 
 	frame = get_sigframe(ksig, regs, sizeof(*frame));
 	if (!access_ok(frame, sizeof(*frame)))
@@ -209,7 +211,12 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 	if (copy_to_user(&frame->sigreturn_code, __user_rt_sigreturn,
 			 sizeof(frame->sigreturn_code)))
 		return -EFAULT;
-	regs->ra = (unsigned long)&frame->sigreturn_code;
+
+	addr = (unsigned long)&frame->sigreturn_code;
+	/* Make sure the two instructions are pushed to icache. */
+	flush_icache_range(addr, addr + sizeof(frame->sigreturn_code));
+
+	regs->ra = addr;
 #endif /* CONFIG_MMU */
 
 	/*
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 42e9656a1db2..23e533766a49 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -13,14 +13,15 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/kexec.h>
+#include <linux/percpu.h>
 #include <linux/profile.h>
 #include <linux/smp.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/delay.h>
+#include <linux/irq.h>
 #include <linux/irq_work.h>
 
-#include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu_ops.h>
@@ -44,11 +45,10 @@ void __init smp_setup_processor_id(void)
 	cpuid_to_hartid_map(0) = boot_cpu_hartid;
 }
 
-/* A collection of single bit ipi messages.  */
-static struct {
-	unsigned long stats[IPI_MAX] ____cacheline_aligned;
-	unsigned long bits ____cacheline_aligned;
-} ipi_data[NR_CPUS] __cacheline_aligned;
+static DEFINE_PER_CPU_READ_MOSTLY(int, ipi_dummy_dev);
+static int ipi_virq_base __ro_after_init;
+static int nr_ipi __ro_after_init = IPI_MAX;
+static struct irq_desc *ipi_desc[IPI_MAX] __read_mostly;
 
 int riscv_hartid_to_cpuid(unsigned long hartid)
 {
@@ -100,48 +100,14 @@ static inline void ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
 }
 #endif
 
-static const struct riscv_ipi_ops *ipi_ops __ro_after_init;
-
-void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
-{
-	ipi_ops = ops;
-}
-EXPORT_SYMBOL_GPL(riscv_set_ipi_ops);
-
-void riscv_clear_ipi(void)
-{
-	if (ipi_ops && ipi_ops->ipi_clear)
-		ipi_ops->ipi_clear();
-
-	csr_clear(CSR_IP, IE_SIE);
-}
-EXPORT_SYMBOL_GPL(riscv_clear_ipi);
-
 static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op)
 {
-	int cpu;
-
-	smp_mb__before_atomic();
-	for_each_cpu(cpu, mask)
-		set_bit(op, &ipi_data[cpu].bits);
-	smp_mb__after_atomic();
-
-	if (ipi_ops && ipi_ops->ipi_inject)
-		ipi_ops->ipi_inject(mask);
-	else
-		pr_warn("SMP: IPI inject method not available\n");
+	__ipi_send_mask(ipi_desc[op], mask);
 }
 
 static void send_ipi_single(int cpu, enum ipi_message_type op)
 {
-	smp_mb__before_atomic();
-	set_bit(op, &ipi_data[cpu].bits);
-	smp_mb__after_atomic();
-
-	if (ipi_ops && ipi_ops->ipi_inject)
-		ipi_ops->ipi_inject(cpumask_of(cpu));
-	else
-		pr_warn("SMP: IPI inject method not available\n");
+	__ipi_send_mask(ipi_desc[op], cpumask_of(cpu));
 }
 
 #ifdef CONFIG_IRQ_WORK
@@ -151,59 +117,98 @@ void arch_irq_work_raise(void)
 }
 #endif
 
-void handle_IPI(struct pt_regs *regs)
+static irqreturn_t handle_IPI(int irq, void *data)
 {
-	unsigned int cpu = smp_processor_id();
-	unsigned long *pending_ipis = &ipi_data[cpu].bits;
-	unsigned long *stats = ipi_data[cpu].stats;
+	int ipi = irq - ipi_virq_base;
+
+	switch (ipi) {
+	case IPI_RESCHEDULE:
+		scheduler_ipi();
+		break;
+	case IPI_CALL_FUNC:
+		generic_smp_call_function_interrupt();
+		break;
+	case IPI_CPU_STOP:
+		ipi_stop();
+		break;
+	case IPI_CPU_CRASH_STOP:
+		ipi_cpu_crash_stop(smp_processor_id(), get_irq_regs());
+		break;
+	case IPI_IRQ_WORK:
+		irq_work_run();
+		break;
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+	case IPI_TIMER:
+		tick_receive_broadcast();
+		break;
+#endif
+	default:
+		pr_warn("CPU%d: unhandled IPI%d\n", smp_processor_id(), ipi);
+		break;
+	}
 
-	riscv_clear_ipi();
+	return IRQ_HANDLED;
+}
 
-	while (true) {
-		unsigned long ops;
+void riscv_ipi_enable(void)
+{
+	int i;
 
-		/* Order bit clearing and data access. */
-		mb();
+	if (WARN_ON_ONCE(!ipi_virq_base))
+		return;
 
-		ops = xchg(pending_ipis, 0);
-		if (ops == 0)
-			return;
+	for (i = 0; i < nr_ipi; i++)
+		enable_percpu_irq(ipi_virq_base + i, 0);
+}
 
-		if (ops & (1 << IPI_RESCHEDULE)) {
-			stats[IPI_RESCHEDULE]++;
-			scheduler_ipi();
-		}
+void riscv_ipi_disable(void)
+{
+	int i;
 
-		if (ops & (1 << IPI_CALL_FUNC)) {
-			stats[IPI_CALL_FUNC]++;
-			generic_smp_call_function_interrupt();
-		}
+	if (WARN_ON_ONCE(!ipi_virq_base))
+		return;
 
-		if (ops & (1 << IPI_CPU_STOP)) {
-			stats[IPI_CPU_STOP]++;
-			ipi_stop();
-		}
+	for (i = 0; i < nr_ipi; i++)
+		disable_percpu_irq(ipi_virq_base + i);
+}
 
-		if (ops & (1 << IPI_CPU_CRASH_STOP)) {
-			ipi_cpu_crash_stop(cpu, get_irq_regs());
-		}
+bool riscv_ipi_have_virq_range(void)
+{
+	return (ipi_virq_base) ? true : false;
+}
 
-		if (ops & (1 << IPI_IRQ_WORK)) {
-			stats[IPI_IRQ_WORK]++;
-			irq_work_run();
-		}
+DEFINE_STATIC_KEY_FALSE(riscv_ipi_for_rfence);
+EXPORT_SYMBOL_GPL(riscv_ipi_for_rfence);
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-		if (ops & (1 << IPI_TIMER)) {
-			stats[IPI_TIMER]++;
-			tick_receive_broadcast();
-		}
-#endif
-		BUG_ON((ops >> IPI_MAX) != 0);
+void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence)
+{
+	int i, err;
+
+	if (WARN_ON(ipi_virq_base))
+		return;
+
+	WARN_ON(nr < IPI_MAX);
+	nr_ipi = min(nr, IPI_MAX);
+	ipi_virq_base = virq;
 
-		/* Order data access and bit testing. */
-		mb();
+	/* Request IPIs */
+	for (i = 0; i < nr_ipi; i++) {
+		err = request_percpu_irq(ipi_virq_base + i, handle_IPI,
+					 "IPI", &ipi_dummy_dev);
+		WARN_ON(err);
+
+		ipi_desc[i] = irq_to_desc(ipi_virq_base + i);
+		irq_set_status_flags(ipi_virq_base + i, IRQ_HIDDEN);
 	}
+
+	/* Enabled IPIs for boot CPU immediately */
+	riscv_ipi_enable();
+
+	/* Update RFENCE static key */
+	if (use_for_rfence)
+		static_branch_enable(&riscv_ipi_for_rfence);
+	else
+		static_branch_disable(&riscv_ipi_for_rfence);
 }
 
 static const char * const ipi_names[] = {
@@ -223,7 +228,7 @@ void show_ipi_stats(struct seq_file *p, int prec)
 		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
 			   prec >= 4 ? " " : "");
 		for_each_online_cpu(cpu)
-			seq_printf(p, "%10lu ", ipi_data[cpu].stats[i]);
+			seq_printf(p, "%10u ", irq_desc_kstat_cpu(ipi_desc[i], cpu));
 		seq_printf(p, " %s\n", ipi_names[i]);
 	}
 }
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index ddb2afba6d25..00b53913d4c6 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -30,7 +30,6 @@
 #include <asm/numa.h>
 #include <asm/tlbflush.h>
 #include <asm/sections.h>
-#include <asm/sbi.h>
 #include <asm/smp.h>
 
 #include "head.h"
@@ -158,12 +157,12 @@ asmlinkage __visible void smp_callin(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int curr_cpuid = smp_processor_id();
 
-	riscv_clear_ipi();
-
 	/* All kernel threads share the same mm context.  */
 	mmgrab(mm);
 	current->active_mm = mm;
 
+	riscv_ipi_enable();
+
 	store_cpu_topology(curr_cpuid);
 	notify_cpu_starting(curr_cpuid);
 	numa_add_cpu(curr_cpuid);
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index 06e6b27f3bcc..a04b3bc35ca2 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -1,9 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 # Copied from arch/tile/kernel/vdso/Makefile
 
-# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before
-# the inclusion of generic Makefile.
-ARCH_REL_TYPE_ABS := R_RISCV_32|R_RISCV_64|R_RISCV_JUMP_SLOT
+# Include the generic Makefile to check the built vdso.
 include $(srctree)/lib/vdso/Makefile
 # Symbols present in the vdso
 vdso-syms  = rt_sigreturn
diff --git a/arch/riscv/kvm/Kconfig b/arch/riscv/kvm/Kconfig
index d5a658a047a7..5682d8c017b3 100644
--- a/arch/riscv/kvm/Kconfig
+++ b/arch/riscv/kvm/Kconfig
@@ -28,7 +28,6 @@ config KVM
 	select KVM_XFER_TO_GUEST_WORK
 	select HAVE_KVM_VCPU_ASYNC_IOCTL
 	select HAVE_KVM_EVENTFD
-	select SRCU
 	help
 	  Support hosting virtualized guest machines.
 
diff --git a/arch/riscv/kvm/vcpu_timer.c b/arch/riscv/kvm/vcpu_timer.c
index ad34519c8a13..3ac2ff6a65da 100644
--- a/arch/riscv/kvm/vcpu_timer.c
+++ b/arch/riscv/kvm/vcpu_timer.c
@@ -147,10 +147,8 @@ static void kvm_riscv_vcpu_timer_blocking(struct kvm_vcpu *vcpu)
 		return;
 
 	delta_ns = kvm_riscv_delta_cycles2ns(t->next_cycles, gt, t);
-	if (delta_ns) {
-		hrtimer_start(&t->hrt, ktime_set(0, delta_ns), HRTIMER_MODE_REL);
-		t->next_set = true;
-	}
+	hrtimer_start(&t->hrt, ktime_set(0, delta_ns), HRTIMER_MODE_REL);
+	t->next_set = true;
 }
 
 static void kvm_riscv_vcpu_timer_unblocking(struct kvm_vcpu *vcpu)
diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c
index fcd6145fbead..20cec5e7cdbf 100644
--- a/arch/riscv/mm/cacheflush.c
+++ b/arch/riscv/mm/cacheflush.c
@@ -19,7 +19,7 @@ void flush_icache_all(void)
 {
 	local_flush_icache_all();
 
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
+	if (IS_ENABLED(CONFIG_RISCV_SBI) && !riscv_use_ipi_for_rfence())
 		sbi_remote_fence_i(NULL);
 	else
 		on_each_cpu(ipi_remote_fence_i, NULL, 1);
@@ -67,7 +67,8 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
 		 * with flush_icache_deferred().
 		 */
 		smp_mb();
-	} else if (IS_ENABLED(CONFIG_RISCV_SBI)) {
+	} else if (IS_ENABLED(CONFIG_RISCV_SBI) &&
+		   !riscv_use_ipi_for_rfence()) {
 		sbi_remote_fence_i(&others);
 	} else {
 		on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1);
diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c
index 0f784e3d307b..12e22e7330e7 100644
--- a/arch/riscv/mm/context.c
+++ b/arch/riscv/mm/context.c
@@ -22,7 +22,7 @@ DEFINE_STATIC_KEY_FALSE(use_asid_allocator);
 
 static unsigned long asid_bits;
 static unsigned long num_asids;
-static unsigned long asid_mask;
+unsigned long asid_mask;
 
 static atomic_long_t current_version;
 
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 478d6763a01a..0f14f4a8d179 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -57,7 +57,6 @@ unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
 EXPORT_SYMBOL(empty_zero_page);
 
 extern char _start[];
-#define DTB_EARLY_BASE_VA      PGDIR_SIZE
 void *_dtb_early_va __initdata;
 uintptr_t _dtb_early_pa __initdata;
 
@@ -236,31 +235,22 @@ static void __init setup_bootmem(void)
 	set_max_mapnr(max_low_pfn - ARCH_PFN_OFFSET);
 
 	reserve_initrd_mem();
+
+	/*
+	 * No allocation should be done before reserving the memory as defined
+	 * in the device tree, otherwise the allocation could end up in a
+	 * reserved region.
+	 */
+	early_init_fdt_scan_reserved_mem();
+
 	/*
 	 * If DTB is built in, no need to reserve its memblock.
 	 * Otherwise, do reserve it but avoid using
 	 * early_init_fdt_reserve_self() since __pa() does
 	 * not work for DTB pointers that are fixmap addresses
 	 */
-	if (!IS_ENABLED(CONFIG_BUILTIN_DTB)) {
-		/*
-		 * In case the DTB is not located in a memory region we won't
-		 * be able to locate it later on via the linear mapping and
-		 * get a segfault when accessing it via __va(dtb_early_pa).
-		 * To avoid this situation copy DTB to a memory region.
-		 * Note that memblock_phys_alloc will also reserve DTB region.
-		 */
-		if (!memblock_is_memory(dtb_early_pa)) {
-			size_t fdt_size = fdt_totalsize(dtb_early_va);
-			phys_addr_t new_dtb_early_pa = memblock_phys_alloc(fdt_size, PAGE_SIZE);
-			void *new_dtb_early_va = early_memremap(new_dtb_early_pa, fdt_size);
-
-			memcpy(new_dtb_early_va, dtb_early_va, fdt_size);
-			early_memunmap(new_dtb_early_va, fdt_size);
-			_dtb_early_pa = new_dtb_early_pa;
-		} else
-			memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
-	}
+	if (!IS_ENABLED(CONFIG_BUILTIN_DTB))
+		memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
 
 	dma_contiguous_reserve(dma32_phys_limit);
 	if (IS_ENABLED(CONFIG_64BIT))
@@ -279,9 +269,6 @@ pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
 static pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
 
 pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
-static p4d_t __maybe_unused early_dtb_p4d[PTRS_PER_P4D] __initdata __aligned(PAGE_SIZE);
-static pud_t __maybe_unused early_dtb_pud[PTRS_PER_PUD] __initdata __aligned(PAGE_SIZE);
-static pmd_t __maybe_unused early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
 
 #ifdef CONFIG_XIP_KERNEL
 #define pt_ops			(*(struct pt_alloc_ops *)XIP_FIXUP(&pt_ops))
@@ -626,9 +613,6 @@ static void __init create_p4d_mapping(p4d_t *p4dp,
 #define trampoline_pgd_next	(pgtable_l5_enabled ?			\
 		(uintptr_t)trampoline_p4d : (pgtable_l4_enabled ?	\
 		(uintptr_t)trampoline_pud : (uintptr_t)trampoline_pmd))
-#define early_dtb_pgd_next	(pgtable_l5_enabled ?			\
-		(uintptr_t)early_dtb_p4d : (pgtable_l4_enabled ?	\
-		(uintptr_t)early_dtb_pud : (uintptr_t)early_dtb_pmd))
 #else
 #define pgd_next_t		pte_t
 #define alloc_pgd_next(__va)	pt_ops.alloc_pte(__va)
@@ -636,7 +620,6 @@ static void __init create_p4d_mapping(p4d_t *p4dp,
 #define create_pgd_next_mapping(__nextp, __va, __pa, __sz, __prot)	\
 	create_pte_mapping(__nextp, __va, __pa, __sz, __prot)
 #define fixmap_pgd_next		((uintptr_t)fixmap_pte)
-#define early_dtb_pgd_next	((uintptr_t)early_dtb_pmd)
 #define create_p4d_mapping(__pmdp, __va, __pa, __sz, __prot) do {} while(0)
 #define create_pud_mapping(__pmdp, __va, __pa, __sz, __prot) do {} while(0)
 #define create_pmd_mapping(__pmdp, __va, __pa, __sz, __prot) do {} while(0)
@@ -860,32 +843,28 @@ static void __init create_kernel_page_table(pgd_t *pgdir, bool early)
  * this means 2 PMD entries whereas for 32-bit kernel, this is only 1 PGDIR
  * entry.
  */
-static void __init create_fdt_early_page_table(pgd_t *pgdir, uintptr_t dtb_pa)
+static void __init create_fdt_early_page_table(pgd_t *pgdir,
+					       uintptr_t fix_fdt_va,
+					       uintptr_t dtb_pa)
 {
-#ifndef CONFIG_BUILTIN_DTB
 	uintptr_t pa = dtb_pa & ~(PMD_SIZE - 1);
 
-	create_pgd_mapping(early_pg_dir, DTB_EARLY_BASE_VA,
-			   IS_ENABLED(CONFIG_64BIT) ? early_dtb_pgd_next : pa,
-			   PGDIR_SIZE,
-			   IS_ENABLED(CONFIG_64BIT) ? PAGE_TABLE : PAGE_KERNEL);
-
-	if (pgtable_l5_enabled)
-		create_p4d_mapping(early_dtb_p4d, DTB_EARLY_BASE_VA,
-				   (uintptr_t)early_dtb_pud, P4D_SIZE, PAGE_TABLE);
-
-	if (pgtable_l4_enabled)
-		create_pud_mapping(early_dtb_pud, DTB_EARLY_BASE_VA,
-				   (uintptr_t)early_dtb_pmd, PUD_SIZE, PAGE_TABLE);
+#ifndef CONFIG_BUILTIN_DTB
+	/* Make sure the fdt fixmap address is always aligned on PMD size */
+	BUILD_BUG_ON(FIX_FDT % (PMD_SIZE / PAGE_SIZE));
 
-	if (IS_ENABLED(CONFIG_64BIT)) {
-		create_pmd_mapping(early_dtb_pmd, DTB_EARLY_BASE_VA,
+	/* In 32-bit only, the fdt lies in its own PGD */
+	if (!IS_ENABLED(CONFIG_64BIT)) {
+		create_pgd_mapping(early_pg_dir, fix_fdt_va,
+				   pa, MAX_FDT_SIZE, PAGE_KERNEL);
+	} else {
+		create_pmd_mapping(fixmap_pmd, fix_fdt_va,
 				   pa, PMD_SIZE, PAGE_KERNEL);
-		create_pmd_mapping(early_dtb_pmd, DTB_EARLY_BASE_VA + PMD_SIZE,
+		create_pmd_mapping(fixmap_pmd, fix_fdt_va + PMD_SIZE,
 				   pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
 	}
 
-	dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
+	dtb_early_va = (void *)fix_fdt_va + (dtb_pa & (PMD_SIZE - 1));
 #else
 	/*
 	 * For 64-bit kernel, __va can't be used since it would return a linear
@@ -1055,7 +1034,8 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	create_kernel_page_table(early_pg_dir, true);
 
 	/* Setup early mapping for FDT early scan */
-	create_fdt_early_page_table(early_pg_dir, dtb_pa);
+	create_fdt_early_page_table(early_pg_dir,
+				    __fix_to_virt(FIX_FDT), dtb_pa);
 
 	/*
 	 * Bootime fixmap only can handle PMD_SIZE mapping. Thus, boot-ioremap
@@ -1097,6 +1077,16 @@ static void __init setup_vm_final(void)
 	u64 i;
 
 	/* Setup swapper PGD for fixmap */
+#if !defined(CONFIG_64BIT)
+	/*
+	 * In 32-bit, the device tree lies in a pgd entry, so it must be copied
+	 * directly in swapper_pg_dir in addition to the pgd entry that points
+	 * to fixmap_pte.
+	 */
+	unsigned long idx = pgd_index(__fix_to_virt(FIX_FDT));
+
+	set_pgd(&swapper_pg_dir[idx], early_pg_dir[idx]);
+#endif
 	create_pgd_mapping(swapper_pg_dir, FIXADDR_START,
 			   __pa_symbol(fixmap_pgd_next),
 			   PGDIR_SIZE, PAGE_TABLE);
diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c
index 37ed760d007c..77be59aadc73 100644
--- a/arch/riscv/mm/tlbflush.c
+++ b/arch/riscv/mm/tlbflush.c
@@ -23,14 +23,62 @@ static inline void local_flush_tlb_page_asid(unsigned long addr,
 			: "memory");
 }
 
+static inline void local_flush_tlb_range(unsigned long start,
+		unsigned long size, unsigned long stride)
+{
+	if (size <= stride)
+		local_flush_tlb_page(start);
+	else
+		local_flush_tlb_all();
+}
+
+static inline void local_flush_tlb_range_asid(unsigned long start,
+		unsigned long size, unsigned long stride, unsigned long asid)
+{
+	if (size <= stride)
+		local_flush_tlb_page_asid(start, asid);
+	else
+		local_flush_tlb_all_asid(asid);
+}
+
+static void __ipi_flush_tlb_all(void *info)
+{
+	local_flush_tlb_all();
+}
+
 void flush_tlb_all(void)
 {
-	sbi_remote_sfence_vma(NULL, 0, -1);
+	if (riscv_use_ipi_for_rfence())
+		on_each_cpu(__ipi_flush_tlb_all, NULL, 1);
+	else
+		sbi_remote_sfence_vma(NULL, 0, -1);
+}
+
+struct flush_tlb_range_data {
+	unsigned long asid;
+	unsigned long start;
+	unsigned long size;
+	unsigned long stride;
+};
+
+static void __ipi_flush_tlb_range_asid(void *info)
+{
+	struct flush_tlb_range_data *d = info;
+
+	local_flush_tlb_range_asid(d->start, d->size, d->stride, d->asid);
+}
+
+static void __ipi_flush_tlb_range(void *info)
+{
+	struct flush_tlb_range_data *d = info;
+
+	local_flush_tlb_range(d->start, d->size, d->stride);
 }
 
-static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
-				  unsigned long size, unsigned long stride)
+static void __flush_tlb_range(struct mm_struct *mm, unsigned long start,
+			      unsigned long size, unsigned long stride)
 {
+	struct flush_tlb_range_data ftd;
 	struct cpumask *cmask = mm_cpumask(mm);
 	unsigned int cpuid;
 	bool broadcast;
@@ -42,22 +90,37 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
 	/* check if the tlbflush needs to be sent to other CPUs */
 	broadcast = cpumask_any_but(cmask, cpuid) < nr_cpu_ids;
 	if (static_branch_unlikely(&use_asid_allocator)) {
-		unsigned long asid = atomic_long_read(&mm->context.id);
+		unsigned long asid = atomic_long_read(&mm->context.id) & asid_mask;
 
 		if (broadcast) {
-			sbi_remote_sfence_vma_asid(cmask, start, size, asid);
-		} else if (size <= stride) {
-			local_flush_tlb_page_asid(start, asid);
+			if (riscv_use_ipi_for_rfence()) {
+				ftd.asid = asid;
+				ftd.start = start;
+				ftd.size = size;
+				ftd.stride = stride;
+				on_each_cpu_mask(cmask,
+						 __ipi_flush_tlb_range_asid,
+						 &ftd, 1);
+			} else
+				sbi_remote_sfence_vma_asid(cmask,
+							   start, size, asid);
 		} else {
-			local_flush_tlb_all_asid(asid);
+			local_flush_tlb_range_asid(start, size, stride, asid);
 		}
 	} else {
 		if (broadcast) {
-			sbi_remote_sfence_vma(cmask, start, size);
-		} else if (size <= stride) {
-			local_flush_tlb_page(start);
+			if (riscv_use_ipi_for_rfence()) {
+				ftd.asid = 0;
+				ftd.start = start;
+				ftd.size = size;
+				ftd.stride = stride;
+				on_each_cpu_mask(cmask,
+						 __ipi_flush_tlb_range,
+						 &ftd, 1);
+			} else
+				sbi_remote_sfence_vma(cmask, start, size);
 		} else {
-			local_flush_tlb_all();
+			local_flush_tlb_range(start, size, stride);
 		}
 	}
 
@@ -66,23 +129,23 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	__sbi_tlb_flush_range(mm, 0, -1, PAGE_SIZE);
+	__flush_tlb_range(mm, 0, -1, PAGE_SIZE);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
+	__flush_tlb_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		     unsigned long end)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, start, end - start, PAGE_SIZE);
+	__flush_tlb_range(vma->vm_mm, start, end - start, PAGE_SIZE);
 }
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			unsigned long end)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, start, end - start, PMD_SIZE);
+	__flush_tlb_range(vma->vm_mm, start, end - start, PMD_SIZE);
 }
 #endif
diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c
index acdc3f040195..c648864c8cd1 100644
--- a/arch/riscv/net/bpf_jit_comp64.c
+++ b/arch/riscv/net/bpf_jit_comp64.c
@@ -1752,3 +1752,8 @@ void bpf_jit_build_epilogue(struct rv_jit_context *ctx)
 {
 	__build_epilogue(false, ctx);
 }
+
+bool bpf_jit_supports_kfunc_call(void)
+{
+	return true;
+}
diff --git a/arch/riscv/purgatory/Makefile b/arch/riscv/purgatory/Makefile
index d16bf715a586..5730797a6b40 100644
--- a/arch/riscv/purgatory/Makefile
+++ b/arch/riscv/purgatory/Makefile
@@ -84,12 +84,7 @@ CFLAGS_string.o			+= $(PURGATORY_CFLAGS)
 CFLAGS_REMOVE_ctype.o		+= $(PURGATORY_CFLAGS_REMOVE)
 CFLAGS_ctype.o			+= $(PURGATORY_CFLAGS)
 
-AFLAGS_REMOVE_entry.o		+= -Wa,-gdwarf-2
-AFLAGS_REMOVE_memcpy.o		+= -Wa,-gdwarf-2
-AFLAGS_REMOVE_memset.o		+= -Wa,-gdwarf-2
-AFLAGS_REMOVE_strcmp.o		+= -Wa,-gdwarf-2
-AFLAGS_REMOVE_strlen.o		+= -Wa,-gdwarf-2
-AFLAGS_REMOVE_strncmp.o		+= -Wa,-gdwarf-2
+asflags-remove-y		+= $(foreach x, -g -gdwarf-4 -gdwarf-5, $(x) -Wa,$(x))
 
 $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
 		$(call if_changed,ld)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 9809c74e1240..61d778397720 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -120,13 +120,14 @@ config S390
 	select ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	select ARCH_SUPPORTS_HUGETLBFS
 	select ARCH_SUPPORTS_NUMA_BALANCING
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANT_DEFAULT_BPF_JIT
-	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
 	select ARCH_WANT_IPC_PARSE_VERSION
+	select ARCH_WANT_OPTIMIZE_VMEMMAP
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS2
 	select DMA_OPS if PCI
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index b3235ab0ace8..ed646c583e4f 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -162,7 +162,7 @@ vdso_prepare: prepare0
 
 ifdef CONFIG_EXPOLINE_EXTERN
 modules_prepare: expoline_prepare
-expoline_prepare:
+expoline_prepare: scripts
 	$(Q)$(MAKE) $(build)=arch/s390/lib/expoline arch/s390/lib/expoline/expoline.o
 endif
 endif
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 2c70b4d1263d..c1f6b46ec555 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -1239,7 +1239,8 @@ static inline int pte_allow_rdp(pte_t old, pte_t new)
 }
 
 static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma,
-						unsigned long address)
+						unsigned long address,
+						pte_t *ptep)
 {
 	/*
 	 * RDP might not have propagated the PTE protection reset to all CPUs,
@@ -1247,11 +1248,12 @@ static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma,
 	 * NOTE: This will also be called when a racing pagetable update on
 	 * another thread already installed the correct PTE. Both cases cannot
 	 * really be distinguished.
-	 * Therefore, only do the local TLB flush when RDP can be used, to avoid
-	 * unnecessary overhead.
+	 * Therefore, only do the local TLB flush when RDP can be used, and the
+	 * PTE does not have _PAGE_PROTECT set, to avoid unnecessary overhead.
+	 * A local RDP can be used to do the flush.
 	 */
-	if (MACHINE_HAS_RDP)
-		asm volatile("ptlb" : : : "memory");
+	if (MACHINE_HAS_RDP && !(pte_val(*ptep) & _PAGE_PROTECT))
+		__ptep_rdp(address, ptep, 0, 0, 1);
 }
 #define flush_tlb_fix_spurious_fault flush_tlb_fix_spurious_fault
 
diff --git a/arch/s390/include/uapi/asm/dasd.h b/arch/s390/include/uapi/asm/dasd.h
index 93d1ccd3304c..9c49c3d67cd5 100644
--- a/arch/s390/include/uapi/asm/dasd.h
+++ b/arch/s390/include/uapi/asm/dasd.h
@@ -78,6 +78,7 @@ typedef struct dasd_information2_t {
  * 0x040: give access to raw eckd data
  * 0x080: enable discard support
  * 0x100: enable autodisable for IFCC errors (default)
+ * 0x200: enable requeue of all requests on autoquiesce
  */
 #define DASD_FEATURE_READONLY	      0x001
 #define DASD_FEATURE_USEDIAG	      0x002
@@ -88,6 +89,7 @@ typedef struct dasd_information2_t {
 #define DASD_FEATURE_USERAW	      0x040
 #define DASD_FEATURE_DISCARD	      0x080
 #define DASD_FEATURE_PATH_AUTODISABLE 0x100
+#define DASD_FEATURE_REQUEUEQUIESCE   0x200
 #define DASD_FEATURE_DEFAULT	      DASD_FEATURE_PATH_AUTODISABLE
 
 #define DASD_PARTN_BITS 2
diff --git a/arch/s390/kernel/idle.c b/arch/s390/kernel/idle.c
index 38e267c7bff7..e7239aaf428b 100644
--- a/arch/s390/kernel/idle.c
+++ b/arch/s390/kernel/idle.c
@@ -88,7 +88,7 @@ void arch_cpu_idle_exit(void)
 {
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	cpu_die();
 }
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 43ff91073d2a..6c10da43b538 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -32,6 +32,11 @@ ENTRY(ftrace_stub)
 	BR_EX	%r14
 ENDPROC(ftrace_stub)
 
+SYM_CODE_START(ftrace_stub_direct_tramp)
+	lgr	%r1, %r0
+	BR_EX	%r1
+SYM_CODE_END(ftrace_stub_direct_tramp)
+
 	.macro	ftrace_regs_entry, allregs=0
 	stg	%r14,(__SF_GPRS+8*8)(%r15)	# save traced function caller
 
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index 2d159b32885b..b9dbf0c483ed 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -126,6 +126,7 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 	Elf_Rela *rela;
 	char *strings;
 	int nrela, i, j;
+	struct module_memory *mod_mem;
 
 	/* Find symbol table and string table. */
 	symtab = NULL;
@@ -173,14 +174,15 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 
 	/* Increase core size by size of got & plt and set start
 	   offsets for got and plt. */
-	me->core_layout.size = ALIGN(me->core_layout.size, 4);
-	me->arch.got_offset = me->core_layout.size;
-	me->core_layout.size += me->arch.got_size;
-	me->arch.plt_offset = me->core_layout.size;
+	mod_mem = &me->mem[MOD_TEXT];
+	mod_mem->size = ALIGN(mod_mem->size, 4);
+	me->arch.got_offset = mod_mem->size;
+	mod_mem->size += me->arch.got_size;
+	me->arch.plt_offset = mod_mem->size;
 	if (me->arch.plt_size) {
 		if (IS_ENABLED(CONFIG_EXPOLINE) && !nospec_disable)
 			me->arch.plt_size += PLT_ENTRY_SIZE;
-		me->core_layout.size += me->arch.plt_size;
+		mod_mem->size += me->arch.plt_size;
 	}
 	return 0;
 }
@@ -304,7 +306,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 	case R_390_GOTPLT64:	/* 64 bit offset to jump slot.	*/
 	case R_390_GOTPLTENT:	/* 32 bit rel. offset to jump slot >> 1. */
 		if (info->got_initialized == 0) {
-			Elf_Addr *gotent = me->core_layout.base +
+			Elf_Addr *gotent = me->mem[MOD_TEXT].base +
 					   me->arch.got_offset +
 					   info->got_offset;
 
@@ -329,7 +331,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 			rc = apply_rela_bits(loc, val, 0, 64, 0, write);
 		else if (r_type == R_390_GOTENT ||
 			 r_type == R_390_GOTPLTENT) {
-			val += (Elf_Addr) me->core_layout.base - loc;
+			val += (Elf_Addr) me->mem[MOD_TEXT].base - loc;
 			rc = apply_rela_bits(loc, val, 1, 32, 1, write);
 		}
 		break;
@@ -345,7 +347,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 			char *plt_base;
 			char *ip;
 
-			plt_base = me->core_layout.base + me->arch.plt_offset;
+			plt_base = me->mem[MOD_TEXT].base + me->arch.plt_offset;
 			ip = plt_base + info->plt_offset;
 			*(int *)insn = 0x0d10e310;	/* basr 1,0  */
 			*(int *)&insn[4] = 0x100c0004;	/* lg	1,12(1) */
@@ -375,7 +377,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 			       val - loc + 0xffffUL < 0x1ffffeUL) ||
 			      (r_type == R_390_PLT32DBL &&
 			       val - loc + 0xffffffffULL < 0x1fffffffeULL)))
-				val = (Elf_Addr) me->core_layout.base +
+				val = (Elf_Addr) me->mem[MOD_TEXT].base +
 					me->arch.plt_offset +
 					info->plt_offset;
 			val += rela->r_addend - loc;
@@ -397,7 +399,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 	case R_390_GOTOFF32:	/* 32 bit offset to GOT.  */
 	case R_390_GOTOFF64:	/* 64 bit offset to GOT. */
 		val = val + rela->r_addend -
-			((Elf_Addr) me->core_layout.base + me->arch.got_offset);
+			((Elf_Addr) me->mem[MOD_TEXT].base + me->arch.got_offset);
 		if (r_type == R_390_GOTOFF16)
 			rc = apply_rela_bits(loc, val, 0, 16, 0, write);
 		else if (r_type == R_390_GOTOFF32)
@@ -407,7 +409,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 		break;
 	case R_390_GOTPC:	/* 32 bit PC relative offset to GOT. */
 	case R_390_GOTPCDBL:	/* 32 bit PC rel. off. to GOT shifted by 1. */
-		val = (Elf_Addr) me->core_layout.base + me->arch.got_offset +
+		val = (Elf_Addr) me->mem[MOD_TEXT].base + me->arch.got_offset +
 			rela->r_addend - loc;
 		if (r_type == R_390_GOTPC)
 			rc = apply_rela_bits(loc, val, 1, 32, 0, write);
@@ -515,7 +517,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 	    !nospec_disable && me->arch.plt_size) {
 		unsigned int *ij;
 
-		ij = me->core_layout.base + me->arch.plt_offset +
+		ij = me->mem[MOD_TEXT].base + me->arch.plt_offset +
 			me->arch.plt_size - PLT_ENTRY_SIZE;
 		ij[0] = 0xc6000000;	/* exrl	%r0,.+10	*/
 		ij[1] = 0x0005a7f4;	/* j	.		*/
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index cf9659e13f03..ea244a73efad 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -474,9 +474,7 @@ long arch_ptrace(struct task_struct *child, long request,
 		}
 		return 0;
 	case PTRACE_GET_LAST_BREAK:
-		put_user(child->thread.last_break,
-			 (unsigned long __user *) data);
-		return 0;
+		return put_user(child->thread.last_break, (unsigned long __user *)data);
 	case PTRACE_ENABLE_TE:
 		if (!MACHINE_HAS_TE)
 			return -EIO;
@@ -824,9 +822,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		}
 		return 0;
 	case PTRACE_GET_LAST_BREAK:
-		put_user(child->thread.last_break,
-			 (unsigned int __user *) data);
-		return 0;
+		return put_user(child->thread.last_break, (unsigned int __user *)data);
 	}
 	return compat_ptrace_request(child, request, addr, data);
 }
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 8ec5cdf9dadc..4259b6c50516 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -396,7 +396,7 @@ int __init arch_early_irq_init(void)
 	return 0;
 }
 
-void __init arch_call_rest_init(void)
+void __init __noreturn arch_call_rest_init(void)
 {
 	unsigned long stack;
 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index a710319f97e9..70a84748f806 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -1227,11 +1227,17 @@ static DEVICE_ATTR_WO(rescan);
 
 static int __init s390_smp_init(void)
 {
+	struct device *dev_root;
 	int cpu, rc = 0;
 
-	rc = device_create_file(cpu_subsys.dev_root, &dev_attr_rescan);
-	if (rc)
-		return rc;
+	dev_root = bus_get_dev_root(&cpu_subsys);
+	if (dev_root) {
+		rc = device_create_file(dev_root, &dev_attr_rescan);
+		put_device(dev_root);
+		if (rc)
+			return rc;
+	}
+
 	for_each_present_cpu(cpu) {
 		rc = smp_add_present_cpu(cpu);
 		if (rc)
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index c6eecd4a5302..72af753d1bba 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -649,12 +649,21 @@ static struct ctl_table topology_dir_table[] = {
 
 static int __init topology_init(void)
 {
+	struct device *dev_root;
+	int rc = 0;
+
 	timer_setup(&topology_timer, topology_timer_fn, TIMER_DEFERRABLE);
 	if (MACHINE_HAS_TOPOLOGY)
 		set_topology_timer();
 	else
 		topology_update_polarization_simple();
 	register_sysctl_table(topology_dir_table);
-	return device_create_file(cpu_subsys.dev_root, &dev_attr_dispatching);
+
+	dev_root = bus_get_dev_root(&cpu_subsys);
+	if (dev_root) {
+		rc = device_create_file(dev_root, &dev_attr_dispatching);
+		put_device(dev_root);
+	}
+	return rc;
 }
 device_initcall(topology_init);
diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
index 245bddfe9bc0..bafd3147eb4e 100644
--- a/arch/s390/kernel/vdso32/Makefile
+++ b/arch/s390/kernel/vdso32/Makefile
@@ -2,9 +2,8 @@
 # List of files in the vdso
 
 KCOV_INSTRUMENT := n
-ARCH_REL_TYPE_ABS := R_390_COPY|R_390_GLOB_DAT|R_390_JMP_SLOT|R_390_RELATIVE
-ARCH_REL_TYPE_ABS += R_390_GOT|R_390_PLT
 
+# Include the generic Makefile to check the built vdso.
 include $(srctree)/lib/vdso/Makefile
 obj-vdso32 = vdso_user_wrapper-32.o note-32.o
 
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index 34f9542636e9..a766d286e15f 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -2,9 +2,8 @@
 # List of files in the vdso
 
 KCOV_INSTRUMENT := n
-ARCH_REL_TYPE_ABS := R_390_COPY|R_390_GLOB_DAT|R_390_JMP_SLOT|R_390_RELATIVE
-ARCH_REL_TYPE_ABS += R_390_GOT|R_390_PLT
 
+# Include the generic Makefile to check the built vdso.
 include $(srctree)/lib/vdso/Makefile
 obj-vdso64 = vdso_user_wrapper.o note.o
 obj-cvdso64 = vdso64_generic.o getcpu.o
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 33f4ff909476..45fdf2a9b2e3 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -31,7 +31,6 @@ config KVM
 	select HAVE_KVM_IRQ_ROUTING
 	select HAVE_KVM_INVALID_WAKEUPS
 	select HAVE_KVM_NO_POLL
-	select SRCU
 	select KVM_VFIO
 	select INTERVAL_TREE
 	select MMU_NOTIFIER
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 0ee02dae14b2..2cda8d9d7c6e 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -271,10 +271,18 @@ static int handle_prog(struct kvm_vcpu *vcpu)
  * handle_external_interrupt - used for external interruption interceptions
  * @vcpu: virtual cpu
  *
- * This interception only occurs if the CPUSTAT_EXT_INT bit was set, or if
- * the new PSW does not have external interrupts disabled. In the first case,
- * we've got to deliver the interrupt manually, and in the second case, we
- * drop to userspace to handle the situation there.
+ * This interception occurs if:
+ * - the CPUSTAT_EXT_INT bit was already set when the external interrupt
+ *   occurred. In this case, the interrupt needs to be injected manually to
+ *   preserve interrupt priority.
+ * - the external new PSW has external interrupts enabled, which will cause an
+ *   interruption loop. We drop to userspace in this case.
+ *
+ * The latter case can be detected by inspecting the external mask bit in the
+ * external new psw.
+ *
+ * Under PV, only the latter case can occur, since interrupt priorities are
+ * handled in the ultravisor.
  */
 static int handle_external_interrupt(struct kvm_vcpu *vcpu)
 {
@@ -285,10 +293,18 @@ static int handle_external_interrupt(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.exit_external_interrupt++;
 
-	rc = read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &newpsw, sizeof(psw_t));
-	if (rc)
-		return rc;
-	/* We can not handle clock comparator or timer interrupt with bad PSW */
+	if (kvm_s390_pv_cpu_is_protected(vcpu)) {
+		newpsw = vcpu->arch.sie_block->gpsw;
+	} else {
+		rc = read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &newpsw, sizeof(psw_t));
+		if (rc)
+			return rc;
+	}
+
+	/*
+	 * Clock comparator or timer interrupt with external interrupt enabled
+	 * will cause interrupt loop. Drop to userspace.
+	 */
 	if ((eic == EXT_IRQ_CLK_COMP || eic == EXT_IRQ_CPU_TIMER) &&
 	    (newpsw.mask & PSW_MASK_EXT))
 		return -EOPNOTSUPP;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 39b36562c043..1eeb9ae57879 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -573,6 +573,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_S390_VCPU_RESETS:
 	case KVM_CAP_SET_GUEST_DEBUG:
 	case KVM_CAP_S390_DIAG318:
+	case KVM_CAP_IRQFD_RESAMPLE:
 		r = 1;
 		break;
 	case KVM_CAP_SET_GUEST_DEBUG2:
diff --git a/arch/s390/lib/uaccess.c b/arch/s390/lib/uaccess.c
index 720036fb1924..d44214072779 100644
--- a/arch/s390/lib/uaccess.c
+++ b/arch/s390/lib/uaccess.c
@@ -172,7 +172,7 @@ unsigned long __clear_user(void __user *to, unsigned long size)
 		"4: slgr  %0,%0\n"
 		"5:\n"
 		EX_TABLE(0b,2b) EX_TABLE(6b,2b) EX_TABLE(3b,5b) EX_TABLE(7b,5b)
-		: "+a" (size), "+a" (to), "+a" (tmp1), "=a" (tmp2)
+		: "+&a" (size), "+&a" (to), "+a" (tmp1), "=&a" (tmp2)
 		: "a" (empty_zero_page), [spec] "d" (spec.val)
 		: "cc", "memory", "0");
 	return size;
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index a2632fd97d00..b65144c392b0 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -407,6 +407,30 @@ static inline vm_fault_t do_exception(struct pt_regs *regs, int access)
 		access = VM_WRITE;
 	if (access == VM_WRITE)
 		flags |= FAULT_FLAG_WRITE;
+#ifdef CONFIG_PER_VMA_LOCK
+	if (!(flags & FAULT_FLAG_USER))
+		goto lock_mmap;
+	vma = lock_vma_under_rcu(mm, address);
+	if (!vma)
+		goto lock_mmap;
+	if (!(vma->vm_flags & access)) {
+		vma_end_read(vma);
+		goto lock_mmap;
+	}
+	fault = handle_mm_fault(vma, address, flags | FAULT_FLAG_VMA_LOCK, regs);
+	vma_end_read(vma);
+	if (!(fault & VM_FAULT_RETRY)) {
+		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+		goto out;
+	}
+	count_vm_vma_lock_event(VMA_LOCK_RETRY);
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		fault = VM_FAULT_SIGNAL;
+		goto out;
+	}
+lock_mmap:
+#endif /* CONFIG_PER_VMA_LOCK */
 	mmap_read_lock(mm);
 
 	gmap = NULL;
diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index 5a716bdcba05..0949811761e6 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -2591,6 +2591,13 @@ int gmap_mark_unmergeable(void)
 	int ret;
 	VMA_ITERATOR(vmi, mm, 0);
 
+	/*
+	 * Make sure to disable KSM (if enabled for the whole process or
+	 * individual VMAs). Note that nothing currently hinders user space
+	 * from re-enabling it.
+	 */
+	clear_bit(MMF_VM_MERGE_ANY, &mm->flags);
+
 	for_each_vma(vmi, vma) {
 		/* Copy vm_flags to avoid partial modifications in ksm_madvise */
 		vm_flags = vma->vm_flags;
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index c299a18273ff..c718f2a0de94 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -273,7 +273,7 @@ static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
 
 	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
 	info.length = len;
-	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
+	info.low_limit = PAGE_SIZE;
 	info.high_limit = current->mm->mmap_base;
 	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
 	info.align_offset = 0;
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index 3327c47bc181..fc9a7dc26c5e 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -136,7 +136,7 @@ unsigned long arch_get_unmapped_area_topdown(struct file *filp, unsigned long ad
 
 	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
 	info.length = len;
-	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
+	info.low_limit = PAGE_SIZE;
 	info.high_limit = mm->mmap_base;
 	if (filp || (flags & MAP_SHARED))
 		info.align_mask = MMAP_ALIGN_MASK << PAGE_SHIFT;
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index d0846ba818ee..f95d7e401b96 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -539,7 +539,7 @@ static void bpf_jit_plt(void *plt, void *ret, void *target)
 {
 	memcpy(plt, bpf_plt, BPF_PLT_SIZE);
 	*(void **)((char *)plt + (bpf_plt_ret - bpf_plt)) = ret;
-	*(void **)((char *)plt + (bpf_plt_target - bpf_plt)) = target;
+	*(void **)((char *)plt + (bpf_plt_target - bpf_plt)) = target ?: ret;
 }
 
 /*
@@ -2001,6 +2001,11 @@ bool bpf_jit_supports_kfunc_call(void)
 	return true;
 }
 
+bool bpf_jit_supports_far_kfunc_call(void)
+{
+	return true;
+}
+
 int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
 		       void *old_addr, void *new_addr)
 {
@@ -2010,7 +2015,9 @@ int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
 	} __packed insn;
 	char expected_plt[BPF_PLT_SIZE];
 	char current_plt[BPF_PLT_SIZE];
+	char new_plt[BPF_PLT_SIZE];
 	char *plt;
+	char *ret;
 	int err;
 
 	/* Verify the branch to be patched. */
@@ -2032,12 +2039,15 @@ int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
 		err = copy_from_kernel_nofault(current_plt, plt, BPF_PLT_SIZE);
 		if (err < 0)
 			return err;
-		bpf_jit_plt(expected_plt, (char *)ip + 6, old_addr);
+		ret = (char *)ip + 6;
+		bpf_jit_plt(expected_plt, ret, old_addr);
 		if (memcmp(current_plt, expected_plt, BPF_PLT_SIZE))
 			return -EINVAL;
 		/* Adjust the call address. */
+		bpf_jit_plt(new_plt, ret, new_addr);
 		s390_kernel_write(plt + (bpf_plt_target - bpf_plt),
-				  &new_addr, sizeof(void *));
+				  new_plt + (bpf_plt_target - bpf_plt),
+				  sizeof(void *));
 	}
 
 	/* Adjust the mask of the branch. */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0665ac0add0b..9652d367fc37 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -4,7 +4,6 @@ config SUPERH
 	select ARCH_32BIT_OFF_T
 	select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM && MMU
 	select ARCH_ENABLE_MEMORY_HOTREMOVE if SPARSEMEM && MMU
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
 	select ARCH_HAS_BINFMT_FLAT if !MMU
 	select ARCH_HAS_CURRENT_STACK_POINTER
@@ -21,10 +20,14 @@ config SUPERH
 	select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IRQ_SHOW
+	select GENERIC_LIB_ASHLDI3
+	select GENERIC_LIB_ASHRDI3
+	select GENERIC_LIB_LSHRDI3
 	select GENERIC_PCI_IOMAP if PCI
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GUP_GET_PXX_LOW_HIGH if X2TLB
+	select HAS_IOPORT if HAS_IOPORT_MAP
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index fff419f3d757..336c54369636 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -85,7 +85,7 @@ config CPU_HAS_SR_RB
 	  that are lacking this bit must have another method in place for
 	  accomplishing what is taken care of by the banked registers.
 
-	  See <file:Documentation/sh/register-banks.rst> for further
+	  See <file:Documentation/arch/sh/register-banks.rst> for further
 	  information on SR.RB and register banking in the kernel in general.
 
 config CPU_HAS_PTEAEX
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 10290e5c1f43..c449e7c1b20f 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -15,7 +15,7 @@ config SH_STANDARD_BIOS
 
 config STACK_DEBUG
 	bool "Check for stack overflows"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && PRINTK
 	help
 	  This option will cause messages to be printed if free stack space
 	  drops below a certain limit. Saying Y here will add overhead to
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 83bcb6d2daca..fafe15d3ba1d 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -358,7 +358,6 @@ config SH_SH2007
 	  intended for embedded applications.
 	  It has an Ethernet interface (SMC9118), direct connected
 	  Compact Flash socket, two serial ports and PC-104 bus.
-	  More information at <http://sh2000.sh-linux.org>.
 
 config SH_APSH4A3A
 	bool "AP-SH4A-3A"
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 56bd386ff3b0..75de893152af 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -21,6 +21,7 @@
 #include <linux/sh_intc.h>
 #include <mach/magicpanelr2.h>
 #include <asm/heartbeat.h>
+#include <cpu/gpio.h>
 #include <cpu/sh7720.h>
 
 /* Dummy supplies, where voltage doesn't matter */
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index c77b5f00a66a..151792162152 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
@@ -411,16 +412,16 @@ static int __init ap325rxa_devices_setup(void)
 	/* LD3 and LD4 LEDs */
 	gpio_request(GPIO_PTX5, NULL); /* RUN */
 	gpio_direction_output(GPIO_PTX5, 1);
-	gpio_export(GPIO_PTX5, 0);
+	gpiod_export(gpio_to_desc(GPIO_PTX5), 0);
 
 	gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
 	gpio_direction_output(GPIO_PTX4, 0);
-	gpio_export(GPIO_PTX4, 0);
+	gpiod_export(gpio_to_desc(GPIO_PTX4), 0);
 
 	/* SW1 input */
 	gpio_request(GPIO_PTF7, NULL); /* MODE */
 	gpio_direction_input(GPIO_PTF7);
-	gpio_export(GPIO_PTF7, 0);
+	gpiod_export(gpio_to_desc(GPIO_PTF7), 0);
 
 	/* LCDC */
 	gpio_request(GPIO_FN_LCDD15, NULL);
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index 95b85f2e13dd..ca2802d30565 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -16,7 +16,7 @@
 #include <linux/input.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/usb/m66592.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio_keys.h>
 #include <mach/ilsel.h>
 #include <mach/hardware.h>
diff --git a/arch/sh/boot/compressed/ashldi3.c b/arch/sh/boot/compressed/ashldi3.c
index 7cebd646df83..7c1212170230 100644
--- a/arch/sh/boot/compressed/ashldi3.c
+++ b/arch/sh/boot/compressed/ashldi3.c
@@ -1,2 +1,2 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "../../lib/ashldi3.c"
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include "../../../../lib/ashldi3.c"
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index b52e14ccb450..4d655e8d4d74 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -8,7 +8,7 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_ARCH_FORCE_MAX_ORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=11
 CONFIG_MEMORY_SIZE=0x10000000
 CONFIG_FLATMEM_MANUAL=y
 CONFIG_SH_ECOVEC=y
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 8ef318150f84..431bc18f0a41 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -45,13 +45,19 @@ static DEVICE_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
 
 static int __init dma_subsys_init(void)
 {
+	struct device *dev_root;
 	int ret;
 
 	ret = subsys_system_register(&dma_subsys, NULL);
 	if (unlikely(ret))
 		return ret;
 
-	return device_create_file(dma_subsys.dev_root, &dev_attr_devices);
+	dev_root = bus_get_dev_root(&dma_subsys);
+	if (dev_root) {
+		ret = device_create_file(dev_root, &dev_attr_devices);
+		put_device(dev_root);
+	}
+	return ret;
 }
 postcore_initcall(dma_subsys_init);
 
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
index b0c2a5238d04..a78b9a935585 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -31,7 +31,6 @@ struct sh7786_pcie_port {
 
 static struct sh7786_pcie_port *sh7786_pcie_ports;
 static unsigned int nr_ports;
-static unsigned long dma_pfn_offset;
 size_t memsize;
 u64 memstart;
 
@@ -140,12 +139,12 @@ static void sh7786_pci_fixup(struct pci_dev *dev)
 	 * Prevent enumeration of root complex resources.
 	 */
 	if (pci_is_root_bus(dev->bus) && dev->devfn == 0) {
-		int i;
+		struct resource *r;
 
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start	= 0;
-			dev->resource[i].end	= 0;
-			dev->resource[i].flags	= 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start	= 0;
+			r->end		= 0;
+			r->flags	= 0;
 		}
 	}
 }
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
deleted file mode 100644
index 588c1380e4cb..000000000000
--- a/arch/sh/include/asm/gpio.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- *  include/asm-sh/gpio.h
- *
- * Generic GPIO API and pinmux table support for SuperH.
- *
- * Copyright (c) 2008 Magnus Damm
- */
-#ifndef __ASM_SH_GPIO_H
-#define __ASM_SH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-
-#if defined(CONFIG_CPU_SH3)
-#include <cpu/gpio.h>
-#endif
-
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/smp-ops.h b/arch/sh/include/asm/smp-ops.h
index e27702130eb6..97331fcb7b85 100644
--- a/arch/sh/include/asm/smp-ops.h
+++ b/arch/sh/include/asm/smp-ops.h
@@ -24,9 +24,10 @@ static inline void plat_smp_setup(void)
 	mp_ops->smp_setup();
 }
 
-static inline void play_dead(void)
+static inline void __noreturn play_dead(void)
 {
 	mp_ops->play_dead();
+	BUG();
 }
 
 extern void register_smp_ops(struct plat_smp_ops *ops);
@@ -42,7 +43,7 @@ static inline void register_smp_ops(struct plat_smp_ops *ops)
 {
 }
 
-static inline void play_dead(void)
+static inline void __noreturn play_dead(void)
 {
 	BUG();
 }
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
index 68eb24ad2013..9b3fc923ee28 100644
--- a/arch/sh/include/asm/types.h
+++ b/arch/sh/include/asm/types.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_SH_TYPES_H
 #define __ASM_SH_TYPES_H
 
-#include <uapi/asm/types.h>
+#include <asm-generic/int-ll64.h>
 
 /*
  * These aren't exported outside the kernel to avoid name space clashes
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 27f2e3da5aa2..d289e99dc118 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -372,7 +372,6 @@ static struct subsys_interface sq_interface = {
 static int __init sq_api_init(void)
 {
 	unsigned int nr_pages = 0x04000000 >> PAGE_SHIFT;
-	unsigned int size = (nr_pages + (BITS_PER_LONG - 1)) / BITS_PER_LONG;
 	int ret = -ENOMEM;
 
 	printk(KERN_NOTICE "sq: Registering store queue API.\n");
@@ -382,7 +381,7 @@ static int __init sq_api_init(void)
 	if (unlikely(!sq_cache))
 		return ret;
 
-	sq_bitmap = kzalloc(size, GFP_KERNEL);
+	sq_bitmap = bitmap_zalloc(nr_pages, GFP_KERNEL);
 	if (unlikely(!sq_bitmap))
 		goto out;
 
@@ -393,7 +392,7 @@ static int __init sq_api_init(void)
 	return 0;
 
 out:
-	kfree(sq_bitmap);
+	bitmap_free(sq_bitmap);
 	kmem_cache_destroy(sq_cache);
 
 	return ret;
@@ -402,7 +401,7 @@ out:
 static void __exit sq_api_exit(void)
 {
 	subsys_interface_unregister(&sq_interface);
-	kfree(sq_bitmap);
+	bitmap_free(sq_bitmap);
 	kmem_cache_destroy(sq_cache);
 }
 
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index 4adbd4ade319..b603b7968b38 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -64,7 +64,7 @@ ENTRY(_stext)
 	ldc	r0, r6_bank
 #endif
 
-#ifdef CONFIG_OF_FLATTREE
+#ifdef CONFIG_OF_EARLY_FLATTREE
 	mov	r4, r12		! Store device tree blob pointer in r12
 #endif
 	
@@ -315,7 +315,7 @@ ENTRY(_stext)
 10:		
 #endif
 
-#ifdef CONFIG_OF_FLATTREE
+#ifdef CONFIG_OF_EARLY_FLATTREE
 	mov.l	8f, r0		! Make flat device tree available early.
 	jsr	@r0
 	 mov	r12, r4
@@ -346,7 +346,7 @@ ENTRY(stack_start)
 5:	.long	start_kernel
 6:	.long	cpu_init
 7:	.long	init_thread_union
-#if defined(CONFIG_OF_FLATTREE)
+#if defined(CONFIG_OF_EARLY_FLATTREE)
 8:	.long	sh_fdt_init
 #endif
 
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index 3418c40f0099..d662503b0665 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -4,6 +4,7 @@
  *
  *  Copyright (C) 2002 - 2009  Paul Mundt
  */
+#include <linux/cpu.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/mm.h>
@@ -29,7 +30,7 @@ void default_idle(void)
 	clear_bl_bit();
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	play_dead();
 }
diff --git a/arch/sh/kernel/nmi_debug.c b/arch/sh/kernel/nmi_debug.c
index 11777867c6f5..a212b645b4cf 100644
--- a/arch/sh/kernel/nmi_debug.c
+++ b/arch/sh/kernel/nmi_debug.c
@@ -49,7 +49,7 @@ static int __init nmi_debug_setup(char *str)
 	register_die_notifier(&nmi_debug_nb);
 
 	if (*str != '=')
-		return 0;
+		return 1;
 
 	for (p = str + 1; *p; p = sep + 1) {
 		sep = strchr(p, ',');
@@ -70,6 +70,6 @@ static int __init nmi_debug_setup(char *str)
 			break;
 	}
 
-	return 0;
+	return 1;
 }
 __setup("nmi_debug", nmi_debug_setup);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 1fcb6659822a..af977ec4ca5e 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -244,7 +244,7 @@ void __init __weak plat_early_device_setup(void)
 {
 }
 
-#ifdef CONFIG_OF_FLATTREE
+#ifdef CONFIG_OF_EARLY_FLATTREE
 void __ref sh_fdt_init(phys_addr_t dt_phys)
 {
 	static int done = 0;
@@ -326,7 +326,7 @@ void __init setup_arch(char **cmdline_p)
 	/* Let earlyprintk output early console messages */
 	sh_early_platform_driver_probe("earlyprintk", 1, 1);
 
-#ifdef CONFIG_OF_FLATTREE
+#ifdef CONFIG_OF_EARLY_FLATTREE
 #ifdef CONFIG_USE_BUILTIN_DTB
 	unflatten_and_copy_device_tree();
 #else
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index eb473d373ca4..d20a0768b31f 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -7,9 +7,7 @@ lib-y  = delay.o memmove.o memchr.o \
 	 checksum.o strlen.o div64.o div64-generic.o
 
 # Extracted from libgcc
-obj-y += movmem.o ashldi3.o ashrdi3.o lshrdi3.o \
-	 ashlsi3.o ashrsi3.o ashiftrt.o lshrsi3.o \
-	 udiv_qrnnd.o
+obj-y += movmem.o ashlsi3.o ashrsi3.o ashiftrt.o lshrsi3.o udiv_qrnnd.o
 
 udivsi3-y			:= udivsi3_i4i-Os.o
 
diff --git a/arch/sh/lib/ashldi3.c b/arch/sh/lib/ashldi3.c
deleted file mode 100644
index e5afe0935847..000000000000
--- a/arch/sh/lib/ashldi3.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __ashldi3(long long u, word_type b)
-{
-	DWunion uu, w;
-	word_type bm;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-	bm = 32 - b;
-
-	if (bm <= 0) {
-		w.s.low = 0;
-		w.s.high = (unsigned int) uu.s.low << -bm;
-	} else {
-		const unsigned int carries = (unsigned int) uu.s.low >> bm;
-
-		w.s.low = (unsigned int) uu.s.low << b;
-		w.s.high = ((unsigned int) uu.s.high << b) | carries;
-	}
-
-	return w.ll;
-}
-
-EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/sh/lib/ashrdi3.c b/arch/sh/lib/ashrdi3.c
deleted file mode 100644
index ae263fbf2538..000000000000
--- a/arch/sh/lib/ashrdi3.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __ashrdi3(long long u, word_type b)
-{
-	DWunion uu, w;
-	word_type bm;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-	bm = 32 - b;
-
-	if (bm <= 0) {
-		/* w.s.high = 1..1 or 0..0 */
-		w.s.high =
-		    uu.s.high >> 31;
-		w.s.low = uu.s.high >> -bm;
-	} else {
-		const unsigned int carries = (unsigned int) uu.s.high << bm;
-
-		w.s.high = uu.s.high >> b;
-		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
-	}
-
-	return w.ll;
-}
-
-EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/sh/lib/lshrdi3.c b/arch/sh/lib/lshrdi3.c
deleted file mode 100644
index 33eaa1edbc3c..000000000000
--- a/arch/sh/lib/lshrdi3.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __lshrdi3(long long u, word_type b)
-{
-	DWunion uu, w;
-	word_type bm;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-	bm = 32 - b;
-
-	if (bm <= 0) {
-		w.s.high = 0;
-		w.s.low = (unsigned int) uu.s.high >> -bm;
-	} else {
-		const unsigned int carries = (unsigned int) uu.s.high << bm;
-
-		w.s.high = (unsigned int) uu.s.high >> b;
-		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
-	}
-
-	return w.ll;
-}
-
-EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/sh/math-emu/sfp-util.h b/arch/sh/math-emu/sfp-util.h
index 784f541344f3..bda50762b3d3 100644
--- a/arch/sh/math-emu/sfp-util.h
+++ b/arch/sh/math-emu/sfp-util.h
@@ -67,7 +67,3 @@
   } while (0)
 
 #define abort()	return 0
-
-#define __BYTE_ORDER __LITTLE_ENDIAN
-
-
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 411fdc0901f7..511c17aede4a 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -19,28 +19,24 @@ config PAGE_OFFSET
 	default "0x00000000"
 
 config ARCH_FORCE_MAX_ORDER
-	int "Maximum zone order"
-	range 9 64 if PAGE_SIZE_16KB
-	default "9" if PAGE_SIZE_16KB
-	range 7 64 if PAGE_SIZE_64KB
-	default "7" if PAGE_SIZE_64KB
-	range 11 64
-	default "14" if !MMU
-	default "11"
+	int "Order of maximal physically contiguous allocations"
+	default "8" if PAGE_SIZE_16KB
+	default "6" if PAGE_SIZE_64KB
+	default "13" if !MMU
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
-
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
 	  The page size is not necessarily 4KB. Keep this in mind when
 	  choosing a value for this option.
 
+	  Don't change if unsure.
+
 config MEMORY_START
 	hex "Physical memory start address"
 	default "0x08000000"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 84437a4c6545..8535e19062f6 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -32,6 +32,7 @@ config SPARC
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_PCI_IOMAP
+	select HAS_IOPORT
 	select HAVE_NMI_WATCHDOG if SPARC64
 	select HAVE_CBPF_JIT if SPARC32
 	select HAVE_EBPF_JIT if SPARC64
@@ -270,18 +271,17 @@ config ARCH_SPARSEMEM_DEFAULT
 	def_bool y if SPARC64
 
 config ARCH_FORCE_MAX_ORDER
-	int "Maximum zone order"
-	default "13"
+	int "Order of maximal physically contiguous allocations"
+	default "12"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
-
-	  This config option is actually maximum order plus one. For example,
-	  a value of 13 means that the largest free memory block is 2^12 pages.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
+
+	  Don't change if unsure.
 
 if SPARC64 || COMPILE_TEST
 source "kernel/power/Kconfig"
diff --git a/arch/sparc/include/asm/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h
index 7a8380c63aab..799e797c5cdd 100644
--- a/arch/sparc/include/asm/mmu_context_64.h
+++ b/arch/sparc/include/asm/mmu_context_64.h
@@ -185,6 +185,12 @@ static inline void finish_arch_post_lock_switch(void)
 	}
 }
 
+#define mm_untag_mask mm_untag_mask
+static inline unsigned long mm_untag_mask(struct mm_struct *mm)
+{
+       return -1UL >> adi_nbits();
+}
+
 #include <asm-generic/mmu_context.h>
 
 #endif /* !(__ASSEMBLY__) */
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index 2dc8d4641734..5563efa1a19f 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -357,6 +357,42 @@ static inline pgprot_t pgprot_noncached(pgprot_t prot)
  */
 #define pgprot_noncached pgprot_noncached
 
+static inline unsigned long pte_dirty(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_MODIFIED_4U), "i" (_PAGE_MODIFIED_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_write(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
+
+	return (pte_val(pte) & mask);
+}
+
 #if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
 pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags_t flags);
 #define arch_make_huge_pte arch_make_huge_pte
@@ -418,28 +454,43 @@ static inline bool is_hugetlb_pte(pte_t pte)
 }
 #endif
 
+static inline pte_t __pte_mkhwwrite(pte_t pte)
+{
+	unsigned long val = pte_val(pte);
+
+	/*
+	 * Note: we only want to set the HW writable bit if the SW writable bit
+	 * and the SW dirty bit are set.
+	 */
+	__asm__ __volatile__(
+	"\n661:	or		%0, %2, %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	or		%0, %3, %0\n"
+	"	.previous\n"
+	: "=r" (val)
+	: "0" (val), "i" (_PAGE_W_4U), "i" (_PAGE_W_4V));
+
+	return __pte(val);
+}
+
 static inline pte_t pte_mkdirty(pte_t pte)
 {
-	unsigned long val = pte_val(pte), tmp;
+	unsigned long val = pte_val(pte), mask;
 
 	__asm__ __volatile__(
-	"\n661:	or		%0, %3, %0\n"
-	"	nop\n"
-	"\n662:	nop\n"
+	"\n661:	mov		%1, %0\n"
 	"	nop\n"
 	"	.section	.sun4v_2insn_patch, \"ax\"\n"
 	"	.word		661b\n"
-	"	sethi		%%uhi(%4), %1\n"
-	"	sllx		%1, 32, %1\n"
-	"	.word		662b\n"
-	"	or		%1, %%lo(%4), %1\n"
-	"	or		%0, %1, %0\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
 	"	.previous\n"
-	: "=r" (val), "=r" (tmp)
-	: "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
-	  "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
+	: "=r" (mask)
+	: "i" (_PAGE_MODIFIED_4U), "i" (_PAGE_MODIFIED_4V));
 
-	return __pte(val);
+	pte = __pte(val | mask);
+	return pte_write(pte) ? __pte_mkhwwrite(pte) : pte;
 }
 
 static inline pte_t pte_mkclean(pte_t pte)
@@ -481,7 +532,8 @@ static inline pte_t pte_mkwrite(pte_t pte)
 	: "=r" (mask)
 	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
 
-	return __pte(val | mask);
+	pte = __pte(val | mask);
+	return pte_dirty(pte) ? __pte_mkhwwrite(pte) : pte;
 }
 
 static inline pte_t pte_wrprotect(pte_t pte)
@@ -584,42 +636,6 @@ static inline unsigned long pte_young(pte_t pte)
 	return (pte_val(pte) & mask);
 }
 
-static inline unsigned long pte_dirty(pte_t pte)
-{
-	unsigned long mask;
-
-	__asm__ __volatile__(
-	"\n661:	mov		%1, %0\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%2), %0\n"
-	"	sllx		%0, 32, %0\n"
-	"	.previous\n"
-	: "=r" (mask)
-	: "i" (_PAGE_MODIFIED_4U), "i" (_PAGE_MODIFIED_4V));
-
-	return (pte_val(pte) & mask);
-}
-
-static inline unsigned long pte_write(pte_t pte)
-{
-	unsigned long mask;
-
-	__asm__ __volatile__(
-	"\n661:	mov		%1, %0\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%2), %0\n"
-	"	sllx		%0, 32, %0\n"
-	"	.previous\n"
-	: "=r" (mask)
-	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
-
-	return (pte_val(pte) & mask);
-}
-
 static inline unsigned long pte_exec(pte_t pte)
 {
 	unsigned long mask;
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index 587edb8b5a65..8184575b1336 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -19,11 +19,14 @@
 #include <linux/mutex.h>
 #include <linux/atomic.h>
 #include <linux/irqdomain.h>
+#include <linux/spinlock.h>
 
 #define of_compat_cmp(s1, s2, l)	strncmp((s1), (s2), (l))
 #define of_prop_cmp(s1, s2)		strcasecmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcmp((s1), (s2))
 
+extern raw_spinlock_t devtree_lock;
+
 struct of_irq_controller {
 	unsigned int	(*irq_build)(struct device_node *, unsigned int, void *);
 	void		*data;
diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h
index e75783b6abc4..505b6700805d 100644
--- a/arch/sparc/include/asm/smp_64.h
+++ b/arch/sparc/include/asm/smp_64.h
@@ -49,7 +49,7 @@ int hard_smp_processor_id(void);
 
 void smp_fill_in_cpu_possible_map(void);
 void smp_fill_in_sib_core_maps(void);
-void cpu_play_dead(void);
+void __noreturn cpu_play_dead(void);
 
 void smp_fetch_global_regs(void);
 void smp_fetch_global_pmu(void);
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index 94266a5c5b04..b825a5dd0210 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -8,8 +8,10 @@
 
 #include <linux/compiler.h>
 #include <linux/string.h>
+#include <linux/mm_types.h>
 #include <asm/asi.h>
 #include <asm/spitfire.h>
+#include <asm/pgtable.h>
 
 #include <asm/processor.h>
 #include <asm-generic/access_ok.h>
diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c
index e5e5ff6b9a5c..b6663a3fbae9 100644
--- a/arch/sparc/kernel/leon_pci.c
+++ b/arch/sparc/kernel/leon_pci.c
@@ -62,15 +62,14 @@ void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info)
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
+	struct resource *res;
 	u16 cmd, oldcmd;
 	int i;
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	oldcmd = cmd;
 
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		struct resource *res = &dev->resource[i];
-
+	pci_dev_for_each_resource(dev, res, i) {
 		/* Only set up the requested stuff */
 		if (!(mask & (1<<i)))
 			continue;
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 4ebf51e6e78e..b60f58e04164 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -29,7 +29,7 @@ static int of_bus_pci_match(struct device_node *np)
 		 * parent as-is, not with the PCI translate
 		 * method which chops off the top address cell.
 		 */
-		if (!of_find_property(np, "ranges", NULL))
+		if (!of_property_present(np, "ranges"))
 			return 0;
 
 		return 1;
@@ -223,7 +223,7 @@ static int __init build_one_resource(struct device_node *parent,
 static int __init use_1to1_mapping(struct device_node *pp)
 {
 	/* If we have a ranges property in the parent, use it.  */
-	if (of_find_property(pp, "ranges", NULL) != NULL)
+	if (of_property_present(pp, "ranges"))
 		return 0;
 
 	/* Some SBUS devices use intermediate nodes to express
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 5a9f86b1d4e7..5b5143e17ba3 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -58,7 +58,7 @@ static int of_bus_pci_match(struct device_node *np)
 		 * parent as-is, not with the PCI translate
 		 * method which chops off the top address cell.
 		 */
-		if (!of_find_property(np, "ranges", NULL))
+		if (!of_property_present(np, "ranges"))
 			return 0;
 
 		return 1;
@@ -78,7 +78,7 @@ static int of_bus_simba_match(struct device_node *np)
 	 * simba.
 	 */
 	if (of_node_name_eq(np, "pci")) {
-		if (!of_find_property(np, "ranges", NULL))
+		if (!of_property_present(np, "ranges"))
 			return 1;
 	}
 
@@ -283,7 +283,7 @@ static int __init build_one_resource(struct device_node *parent,
 static int __init use_1to1_mapping(struct device_node *pp)
 {
 	/* If we have a ranges property in the parent, use it.  */
-	if (of_find_property(pp, "ranges", NULL) != NULL)
+	if (of_property_present(pp, "ranges"))
 		return 0;
 
 	/* If the parent is the dma node of an ISA bus, pass
diff --git a/arch/sparc/kernel/of_device_common.c b/arch/sparc/kernel/of_device_common.c
index e717a56efc5d..60f86b837658 100644
--- a/arch/sparc/kernel/of_device_common.c
+++ b/arch/sparc/kernel/of_device_common.c
@@ -162,7 +162,7 @@ int of_bus_sbus_match(struct device_node *np)
 		 * don't have some intervening real bus that provides
 		 * ranges based translations.
 		 */
-		if (of_find_property(dp, "ranges", NULL) != NULL)
+		if (of_property_present(dp, "ranges"))
 			break;
 
 		dp = dp->parent;
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index cb1ef25116e9..a948a49817c7 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -663,11 +663,10 @@ static void pci_claim_bus_resources(struct pci_bus *bus)
 	struct pci_dev *dev;
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
+		struct resource *r;
 		int i;
 
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			struct resource *r = &dev->resource[i];
-
+		pci_dev_for_each_resource(dev, r, i) {
 			if (r->parent || !r->start || !r->flags)
 				continue;
 
@@ -724,15 +723,14 @@ struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm,
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
+	struct resource *res;
 	u16 cmd, oldcmd;
 	int i;
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	oldcmd = cmd;
 
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		struct resource *res = &dev->resource[i];
-
+	pci_dev_for_each_resource(dev, res, i) {
 		/* Only set up the requested stuff */
 		if (!(mask & (1<<i)))
 			continue;
diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c
index 421aba00e6b0..23b47f7fdb1d 100644
--- a/arch/sparc/kernel/pci_schizo.c
+++ b/arch/sparc/kernel/pci_schizo.c
@@ -1270,7 +1270,7 @@ static void schizo_pbm_hw_init(struct pci_pbm_info *pbm)
 	    pbm->chip_version >= 0x2)
 		tmp |= 0x3UL << SCHIZO_PCICTRL_PTO_SHIFT;
 
-	if (!of_find_property(pbm->op->dev.of_node, "no-bus-parking", NULL))
+	if (!of_property_read_bool(pbm->op->dev.of_node, "no-bus-parking"))
 		tmp |= SCHIZO_PCICTRL_PARK;
 	else
 		tmp &= ~SCHIZO_PCICTRL_PARK;
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 384480971805..7d91ca6aa675 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -193,7 +193,7 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size,
 
 	size = IO_PAGE_ALIGN(size);
 	order = get_order(size);
-	if (unlikely(order >= MAX_ORDER))
+	if (unlikely(order > MAX_ORDER))
 		return NULL;
 
 	npages = size >> IO_PAGE_SHIFT;
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index ee4c9a9a171c..25fe0a061732 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -643,15 +643,14 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
+	struct resource *res;
 	u16 cmd, oldcmd;
 	int i;
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	oldcmd = cmd;
 
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		struct resource *res = &dev->resource[i];
-
+	pci_dev_for_each_resource(dev, res, i) {
 		/* Only set up the requested stuff */
 		if (!(mask & (1<<i)))
 			continue;
diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c
index d941875dd718..8147985a1dc4 100644
--- a/arch/sparc/kernel/power.c
+++ b/arch/sparc/kernel/power.c
@@ -28,7 +28,7 @@ static int has_button_interrupt(unsigned int irq, struct device_node *dp)
 {
 	if (irq == 0xffffffff)
 		return 0;
-	if (!of_find_property(dp, "button", NULL))
+	if (!of_property_read_bool(dp, "button"))
 		return 0;
 
 	return 1;
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 91c2b8124527..b51d8fb0ecdc 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -95,7 +95,7 @@ void arch_cpu_idle(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	sched_preempt_enable_no_resched();
 	cpu_play_dead();
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index f883a50fa333..998aa693d491 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -502,7 +502,7 @@ static void *fill_in_one_cpu(struct device_node *dp, int cpuid, int arg)
 	struct device_node *portid_parent = NULL;
 	int portid = -1;
 
-	if (of_find_property(dp, "cpuid", NULL)) {
+	if (of_property_present(dp, "cpuid")) {
 		int limit = 2;
 
 		portid_parent = dp;
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 8a08830e4a65..958c2cf4479b 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -277,7 +277,7 @@ static int clock_probe(struct platform_device *op)
 		return -ENODEV;
 
 	/* Only the primary RTC has an address property */
-	if (!of_find_property(dp, "address", NULL))
+	if (!of_property_present(dp, "address"))
 		return -ENODEV;
 
 	m48t59_rtc.resource = &op->resource[0];
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 5b4de4a89dec..08ffd17d5ec3 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -897,7 +897,7 @@ void __init cheetah_ecache_flush_init(void)
 
 	/* Now allocate error trap reporting scoreboard. */
 	sz = NR_CPUS * (2 * sizeof(struct cheetah_err_info));
-	for (order = 0; order < MAX_ORDER; order++) {
+	for (order = 0; order <= MAX_ORDER; order++) {
 		if ((PAGE_SIZE << order) >= sz)
 			break;
 	}
diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c
index 912205787161..5e2931a18409 100644
--- a/arch/sparc/mm/tsb.c
+++ b/arch/sparc/mm/tsb.c
@@ -402,8 +402,8 @@ void tsb_grow(struct mm_struct *mm, unsigned long tsb_index, unsigned long rss)
 	unsigned long new_rss_limit;
 	gfp_t gfp_flags;
 
-	if (max_tsb_size > (PAGE_SIZE << MAX_ORDER))
-		max_tsb_size = (PAGE_SIZE << MAX_ORDER);
+	if (max_tsb_size > PAGE_SIZE << MAX_ORDER)
+		max_tsb_size = PAGE_SIZE << MAX_ORDER;
 
 	new_cache_index = 0;
 	for (new_size = 8192; new_size < max_tsb_size; new_size <<= 1UL) {
diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c
index 77a9321379b7..344ac403fb5d 100644
--- a/arch/um/os-Linux/elf_aux.c
+++ b/arch/um/os-Linux/elf_aux.c
@@ -2,7 +2,7 @@
 /*
  *  arch/um/kernel/elf_aux.c
  *
- *  Scan the Elf auxiliary vector provided by the host to extract
+ *  Scan the ELF auxiliary vector provided by the host to extract
  *  information about vsyscall-page, etc.
  *
  *  Copyright (C) 2004 Fujitsu Siemens Computers GmbH
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a825bf031f49..53bab123a8ee 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -27,6 +27,7 @@ config X86_64
 	# Options that are inherently 64-bit kernel only:
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select HAVE_ARCH_SOFT_DIRTY
 	select MODULES_USE_ELF_RELA
@@ -125,8 +126,8 @@ config X86
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_HUGE_PMD_SHARE
-	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP	if X86_64
 	select ARCH_WANT_LD_ORPHAN_WARN
+	select ARCH_WANT_OPTIMIZE_VMEMMAP	if X86_64
 	select ARCH_WANTS_THP_SWAP		if X86_64
 	select ARCH_HAS_PARANOID_L1D_FLUSH
 	select BUILDTIME_TABLE_SORT
@@ -162,6 +163,7 @@ config X86
 	select GUP_GET_PXX_LOW_HIGH		if X86_PAE
 	select HARDIRQS_SW_RESEND
 	select HARDLOCKUP_CHECK_TIMESTAMP	if X86_64
+	select HAS_IOPORT
 	select HAVE_ACPI_APEI			if ACPI
 	select HAVE_ACPI_APEI_NMI		if ACPI
 	select HAVE_ALIGNED_STRUCT_PAGE		if SLUB
@@ -283,7 +285,6 @@ config X86
 	select RTC_LIB
 	select RTC_MC146818_LIB
 	select SPARSE_IRQ
-	select SRCU
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
 	select TRACE_IRQFLAGS_SUPPORT
@@ -434,7 +435,7 @@ config SMP
 	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 	  Management" code will be disabled if you say Y here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
 	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://www.tldp.org/docs.html#howto>.
 
@@ -1324,7 +1325,7 @@ config MICROCODE
 	  the Linux kernel.
 
 	  The preferred method to load microcode from a detached initrd is described
-	  in Documentation/x86/microcode.rst. For that you need to enable
+	  in Documentation/arch/x86/microcode.rst. For that you need to enable
 	  CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan the
 	  initrd for microcode blobs.
 
@@ -1510,7 +1511,7 @@ config X86_5LEVEL
 	  A kernel with the option enabled can be booted on machines that
 	  support 4- or 5-level paging.
 
-	  See Documentation/x86/x86_64/5level-paging.rst for more
+	  See Documentation/arch/x86/x86_64/5level-paging.rst for more
 	  information.
 
 	  Say N if unsure.
@@ -1774,7 +1775,7 @@ config MTRR
 	  You can safely say Y even if your machine doesn't have MTRRs, you'll
 	  just add about 9 KB to your kernel.
 
-	  See <file:Documentation/x86/mtrr.rst> for more information.
+	  See <file:Documentation/arch/x86/mtrr.rst> for more information.
 
 config MTRR_SANITIZER
 	def_bool y
@@ -1938,7 +1939,6 @@ config X86_SGX
 	depends on X86_64 && CPU_SUP_INTEL && X86_X2APIC
 	depends on CRYPTO=y
 	depends on CRYPTO_SHA256=y
-	select SRCU
 	select MMU_NOTIFIER
 	select NUMA_KEEP_MEMINFO if NUMA
 	select XARRAY_MULTI
@@ -2290,6 +2290,17 @@ config RANDOMIZE_MEMORY_PHYSICAL_PADDING
 
 	  If unsure, leave at the default value.
 
+config ADDRESS_MASKING
+	bool "Linear Address Masking support"
+	depends on X86_64
+	help
+	  Linear Address Masking (LAM) modifies the checking that is applied
+	  to 64-bit linear addresses, allowing software to use of the
+	  untranslated address bits for metadata.
+
+	  The capability can be used for efficient address sanitizers (ASAN)
+	  implementation and for optimizations in JITs.
+
 config HOTPLUG_CPU
 	def_bool y
 	depends on SMP
@@ -2551,7 +2562,7 @@ config PAGE_TABLE_ISOLATION
 	  ensuring that the majority of kernel addresses are not mapped
 	  into userspace.
 
-	  See Documentation/x86/pti.rst for more details.
+	  See Documentation/arch/x86/pti.rst for more details.
 
 config RETPOLINE
 	bool "Avoid speculative indirect branches in kernel"
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index bdfe08f1a930..c5d614d28a75 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -97,7 +97,7 @@ config IOMMU_DEBUG
 	  code. When you use it make sure you have a big enough
 	  IOMMU/AGP aperture.  Most of the options enabled by this can
 	  be set more finegrained using the iommu= command line
-	  options. See Documentation/x86/x86_64/boot-options.rst for more
+	  options. See Documentation/arch/x86/x86_64/boot-options.rst for more
 	  details.
 
 config IOMMU_LEAK
diff --git a/arch/x86/Makefile.um b/arch/x86/Makefile.um
index b70559b821df..2106a2bd152b 100644
--- a/arch/x86/Makefile.um
+++ b/arch/x86/Makefile.um
@@ -3,9 +3,14 @@ core-y += arch/x86/crypto/
 
 #
 # Disable SSE and other FP/SIMD instructions to match normal x86
+# This is required to work around issues in older LLVM versions, but breaks
+# GCC versions < 11. See:
+# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99652
 #
+ifeq ($(CONFIG_CC_IS_CLANG),y)
 KBUILD_CFLAGS += -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx
 KBUILD_RUSTFLAGS += -Ctarget-feature=-sse,-sse2,-sse3,-ssse3,-sse4.1,-sse4.2,-avx,-avx2
+endif
 
 ifeq ($(CONFIG_X86_32),y)
 START := 0x8048000
diff --git a/arch/x86/boot/compressed/ident_map_64.c b/arch/x86/boot/compressed/ident_map_64.c
index 321a5011042d..bcc956c17872 100644
--- a/arch/x86/boot/compressed/ident_map_64.c
+++ b/arch/x86/boot/compressed/ident_map_64.c
@@ -8,14 +8,6 @@
  * Copyright (C)      2016  Kees Cook
  */
 
-/*
- * Since we're dealing with identity mappings, physical and virtual
- * addresses are the same, so override these defines which are ultimately
- * used by the headers in misc.h.
- */
-#define __pa(x)  ((unsigned long)(x))
-#define __va(x)  ((void *)((unsigned long)(x)))
-
 /* No PAGE_TABLE_ISOLATION support needed either: */
 #undef CONFIG_PAGE_TABLE_ISOLATION
 
diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
index 20118fb7c53b..2f155a0e3041 100644
--- a/arch/x86/boot/compressed/misc.h
+++ b/arch/x86/boot/compressed/misc.h
@@ -19,6 +19,15 @@
 /* cpu_feature_enabled() cannot be used this early */
 #define USE_EARLY_PGTABLE_L5
 
+/*
+ * Boot stub deals with identity mappings, physical and virtual addresses are
+ * the same, so override these defines.
+ *
+ * <asm/page.h> will not define them if they are already defined.
+ */
+#define __pa(x)  ((unsigned long)(x))
+#define __va(x)  ((void *)((unsigned long)(x)))
+
 #include <linux/linkage.h>
 #include <linux/screen_info.h>
 #include <linux/elf.h>
diff --git a/arch/x86/boot/compressed/sev.c b/arch/x86/boot/compressed/sev.c
index d63ad8f99f83..014b89c89088 100644
--- a/arch/x86/boot/compressed/sev.c
+++ b/arch/x86/boot/compressed/sev.c
@@ -104,9 +104,7 @@ static enum es_result vc_read_mem(struct es_em_ctxt *ctxt,
 }
 
 #undef __init
-#undef __pa
 #define __init
-#define __pa(x)	((unsigned long)(x))
 
 #define __BOOT_COMPRESSED
 
diff --git a/arch/x86/boot/compressed/tdx.c b/arch/x86/boot/compressed/tdx.c
index 918a7606f53c..2d81d3cc72a1 100644
--- a/arch/x86/boot/compressed/tdx.c
+++ b/arch/x86/boot/compressed/tdx.c
@@ -26,7 +26,7 @@ static inline unsigned int tdx_io_in(int size, u16 port)
 		.r14 = port,
 	};
 
-	if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
+	if (__tdx_hypercall_ret(&args))
 		return UINT_MAX;
 
 	return args.r11;
@@ -43,7 +43,7 @@ static inline void tdx_io_out(int size, u16 port, u32 value)
 		.r15 = value,
 	};
 
-	__tdx_hypercall(&args, 0);
+	__tdx_hypercall(&args);
 }
 
 static inline u8 tdx_inb(u16 port)
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 9338c68e7413..b04ca8e2b213 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -321,7 +321,7 @@ start_sys_seg:	.word	SYSSEG		# obsolete and meaningless, but just
 
 type_of_loader:	.byte	0		# 0 means ancient bootloader, newer
 					# bootloaders know to change this.
-					# See Documentation/x86/boot.rst for
+					# See Documentation/arch/x86/boot.rst for
 					# assigned ids
 
 # flags, unused bits must be zero (RFU) bit within loadflags
diff --git a/arch/x86/coco/core.c b/arch/x86/coco/core.c
index 49b44f881484..73f83233d25d 100644
--- a/arch/x86/coco/core.c
+++ b/arch/x86/coco/core.c
@@ -13,7 +13,7 @@
 #include <asm/coco.h>
 #include <asm/processor.h>
 
-static enum cc_vendor vendor __ro_after_init;
+enum cc_vendor cc_vendor __ro_after_init;
 static u64 cc_mask __ro_after_init;
 
 static bool intel_cc_platform_has(enum cc_attr attr)
@@ -30,6 +30,22 @@ static bool intel_cc_platform_has(enum cc_attr attr)
 }
 
 /*
+ * Handle the SEV-SNP vTOM case where sme_me_mask is zero, and
+ * the other levels of SME/SEV functionality, including C-bit
+ * based SEV-SNP, are not enabled.
+ */
+static __maybe_unused bool amd_cc_platform_vtom(enum cc_attr attr)
+{
+	switch (attr) {
+	case CC_ATTR_GUEST_MEM_ENCRYPT:
+	case CC_ATTR_MEM_ENCRYPT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/*
  * SME and SEV are very similar but they are not the same, so there are
  * times that the kernel will need to distinguish between SME and SEV. The
  * cc_platform_has() function is used for this.  When a distinction isn't
@@ -41,9 +57,14 @@ static bool intel_cc_platform_has(enum cc_attr attr)
  * up under SME the trampoline area cannot be encrypted, whereas under SEV
  * the trampoline area must be encrypted.
  */
+
 static bool amd_cc_platform_has(enum cc_attr attr)
 {
 #ifdef CONFIG_AMD_MEM_ENCRYPT
+
+	if (sev_status & MSR_AMD64_SNP_VTOM)
+		return amd_cc_platform_vtom(attr);
+
 	switch (attr) {
 	case CC_ATTR_MEM_ENCRYPT:
 		return sme_me_mask;
@@ -76,20 +97,13 @@ static bool amd_cc_platform_has(enum cc_attr attr)
 #endif
 }
 
-static bool hyperv_cc_platform_has(enum cc_attr attr)
-{
-	return attr == CC_ATTR_GUEST_MEM_ENCRYPT;
-}
-
 bool cc_platform_has(enum cc_attr attr)
 {
-	switch (vendor) {
+	switch (cc_vendor) {
 	case CC_VENDOR_AMD:
 		return amd_cc_platform_has(attr);
 	case CC_VENDOR_INTEL:
 		return intel_cc_platform_has(attr);
-	case CC_VENDOR_HYPERV:
-		return hyperv_cc_platform_has(attr);
 	default:
 		return false;
 	}
@@ -103,11 +117,14 @@ u64 cc_mkenc(u64 val)
 	 * encryption status of the page.
 	 *
 	 * - for AMD, bit *set* means the page is encrypted
-	 * - for Intel *clear* means encrypted.
+	 * - for AMD with vTOM and for Intel, *clear* means encrypted
 	 */
-	switch (vendor) {
+	switch (cc_vendor) {
 	case CC_VENDOR_AMD:
-		return val | cc_mask;
+		if (sev_status & MSR_AMD64_SNP_VTOM)
+			return val & ~cc_mask;
+		else
+			return val | cc_mask;
 	case CC_VENDOR_INTEL:
 		return val & ~cc_mask;
 	default:
@@ -118,9 +135,12 @@ u64 cc_mkenc(u64 val)
 u64 cc_mkdec(u64 val)
 {
 	/* See comment in cc_mkenc() */
-	switch (vendor) {
+	switch (cc_vendor) {
 	case CC_VENDOR_AMD:
-		return val & ~cc_mask;
+		if (sev_status & MSR_AMD64_SNP_VTOM)
+			return val | cc_mask;
+		else
+			return val & ~cc_mask;
 	case CC_VENDOR_INTEL:
 		return val | cc_mask;
 	default:
@@ -129,11 +149,6 @@ u64 cc_mkdec(u64 val)
 }
 EXPORT_SYMBOL_GPL(cc_mkdec);
 
-__init void cc_set_vendor(enum cc_vendor v)
-{
-	vendor = v;
-}
-
 __init void cc_set_mask(u64 mask)
 {
 	cc_mask = mask;
diff --git a/arch/x86/coco/tdx/tdcall.S b/arch/x86/coco/tdx/tdcall.S
index 6a255e6809bc..b193c0a1d8db 100644
--- a/arch/x86/coco/tdx/tdcall.S
+++ b/arch/x86/coco/tdx/tdcall.S
@@ -85,12 +85,12 @@ SYM_FUNC_START(__tdx_module_call)
 SYM_FUNC_END(__tdx_module_call)
 
 /*
- * __tdx_hypercall() - Make hypercalls to a TDX VMM using TDVMCALL leaf
- * of TDCALL instruction
+ * TDX_HYPERCALL - Make hypercalls to a TDX VMM using TDVMCALL leaf of TDCALL
+ * instruction
  *
  * Transforms values in  function call argument struct tdx_hypercall_args @args
  * into the TDCALL register ABI. After TDCALL operation, VMM output is saved
- * back in @args.
+ * back in @args, if \ret is 1.
  *
  *-------------------------------------------------------------------------
  * TD VMCALL ABI:
@@ -105,26 +105,18 @@ SYM_FUNC_END(__tdx_module_call)
  *                       specification. Non zero value indicates vendor
  *                       specific ABI.
  * R11                 - VMCALL sub function number
- * RBX, RBP, RDI, RSI  - Used to pass VMCALL sub function specific arguments.
+ * RBX, RDX, RDI, RSI  - Used to pass VMCALL sub function specific arguments.
  * R8-R9, R12-R15      - Same as above.
  *
  * Output Registers:
  *
  * RAX                 - TDCALL instruction status (Not related to hypercall
  *                        output).
- * R10                 - Hypercall output error code.
- * R11-R15             - Hypercall sub function specific output values.
+ * RBX, RDX, RDI, RSI  - Hypercall sub function specific output values.
+ * R8-R15              - Same as above.
  *
- *-------------------------------------------------------------------------
- *
- * __tdx_hypercall() function ABI:
- *
- * @args  (RDI)        - struct tdx_hypercall_args for input and output
- * @flags (RSI)        - TDX_HCALL_* flags
- *
- * On successful completion, return the hypercall error code.
  */
-SYM_FUNC_START(__tdx_hypercall)
+.macro TDX_HYPERCALL ret:req
 	FRAME_BEGIN
 
 	/* Save callee-saved GPRs as mandated by the x86_64 ABI */
@@ -134,9 +126,8 @@ SYM_FUNC_START(__tdx_hypercall)
 	push %r12
 	push %rbx
 
-	/* Free RDI and RSI to be used as TDVMCALL arguments */
+	/* Free RDI to be used as TDVMCALL arguments */
 	movq %rdi, %rax
-	push %rsi
 
 	/* Copy hypercall registers from arg struct: */
 	movq TDX_HYPERCALL_r8(%rax),  %r8
@@ -171,14 +162,11 @@ SYM_FUNC_START(__tdx_hypercall)
 	 * and are handled by callers.
 	 */
 	testq %rax, %rax
-	jne .Lpanic
+	jne .Lpanic\@
 
 	pop %rax
 
-	/* Copy hypercall result registers to arg struct if needed */
-	testq $TDX_HCALL_HAS_OUTPUT, (%rsp)
-	jz .Lout
-
+	.if \ret
 	movq %r8,  TDX_HYPERCALL_r8(%rax)
 	movq %r9,  TDX_HYPERCALL_r9(%rax)
 	movq %r10, TDX_HYPERCALL_r10(%rax)
@@ -191,7 +179,8 @@ SYM_FUNC_START(__tdx_hypercall)
 	movq %rsi, TDX_HYPERCALL_rsi(%rax)
 	movq %rbx, TDX_HYPERCALL_rbx(%rax)
 	movq %rdx, TDX_HYPERCALL_rdx(%rax)
-.Lout:
+	.endif
+
 	/* TDVMCALL leaf return code is in R10 */
 	movq %r10, %rax
 
@@ -208,9 +197,6 @@ SYM_FUNC_START(__tdx_hypercall)
 	xor %rdi,  %rdi
 	xor %rdx,  %rdx
 
-	/* Remove TDX_HCALL_* flags from the stack */
-	pop %rsi
-
 	/* Restore callee-saved GPRs as mandated by the x86_64 ABI */
 	pop %rbx
 	pop %r12
@@ -221,9 +207,33 @@ SYM_FUNC_START(__tdx_hypercall)
 	FRAME_END
 
 	RET
-.Lpanic:
+.Lpanic\@:
 	call __tdx_hypercall_failed
 	/* __tdx_hypercall_failed never returns */
 	REACHABLE
-	jmp .Lpanic
+	jmp .Lpanic\@
+.endm
+
+/*
+ *
+ * __tdx_hypercall() function ABI:
+ *
+ * @args  (RDI)        - struct tdx_hypercall_args for input
+ *
+ * On successful completion, return the hypercall error code.
+ */
+SYM_FUNC_START(__tdx_hypercall)
+	TDX_HYPERCALL ret=0
 SYM_FUNC_END(__tdx_hypercall)
+
+/*
+ *
+ * __tdx_hypercall_ret() function ABI:
+ *
+ * @args  (RDI)        - struct tdx_hypercall_args for input and output
+ *
+ * On successful completion, return the hypercall error code.
+ */
+SYM_FUNC_START(__tdx_hypercall_ret)
+	TDX_HYPERCALL ret=1
+SYM_FUNC_END(__tdx_hypercall_ret)
diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c
index 055300e08fb3..e146b599260f 100644
--- a/arch/x86/coco/tdx/tdx.c
+++ b/arch/x86/coco/tdx/tdx.c
@@ -66,7 +66,7 @@ static inline u64 _tdx_hypercall(u64 fn, u64 r12, u64 r13, u64 r14, u64 r15)
 		.r15 = r15,
 	};
 
-	return __tdx_hypercall(&args, 0);
+	return __tdx_hypercall(&args);
 }
 
 /* Called from __tdx_hypercall() for unrecoverable failure */
@@ -99,7 +99,7 @@ long tdx_kvm_hypercall(unsigned int nr, unsigned long p1, unsigned long p2,
 		.r14 = p4,
 	};
 
-	return __tdx_hypercall(&args, 0);
+	return __tdx_hypercall(&args);
 }
 EXPORT_SYMBOL_GPL(tdx_kvm_hypercall);
 #endif
@@ -179,7 +179,7 @@ static void __noreturn tdx_panic(const char *msg)
 	 * happens to return.
 	 */
 	while (1)
-		__tdx_hypercall(&args, 0);
+		__tdx_hypercall(&args);
 }
 
 static void tdx_parse_tdinfo(u64 *cc_mask)
@@ -289,7 +289,7 @@ static u64 __cpuidle __halt(const bool irq_disabled)
 	 * can keep the vCPU in virtual HLT, even if an IRQ is
 	 * pending, without hanging/breaking the guest.
 	 */
-	return __tdx_hypercall(&args, 0);
+	return __tdx_hypercall(&args);
 }
 
 static int handle_halt(struct ve_info *ve)
@@ -326,7 +326,7 @@ static int read_msr(struct pt_regs *regs, struct ve_info *ve)
 	 * can be found in TDX Guest-Host-Communication Interface
 	 * (GHCI), section titled "TDG.VP.VMCALL<Instruction.RDMSR>".
 	 */
-	if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
+	if (__tdx_hypercall_ret(&args))
 		return -EIO;
 
 	regs->ax = lower_32_bits(args.r11);
@@ -348,7 +348,7 @@ static int write_msr(struct pt_regs *regs, struct ve_info *ve)
 	 * can be found in TDX Guest-Host-Communication Interface
 	 * (GHCI) section titled "TDG.VP.VMCALL<Instruction.WRMSR>".
 	 */
-	if (__tdx_hypercall(&args, 0))
+	if (__tdx_hypercall(&args))
 		return -EIO;
 
 	return ve_instr_len(ve);
@@ -380,7 +380,7 @@ static int handle_cpuid(struct pt_regs *regs, struct ve_info *ve)
 	 * ABI can be found in TDX Guest-Host-Communication Interface
 	 * (GHCI), section titled "VP.VMCALL<Instruction.CPUID>".
 	 */
-	if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
+	if (__tdx_hypercall_ret(&args))
 		return -EIO;
 
 	/*
@@ -407,7 +407,7 @@ static bool mmio_read(int size, unsigned long addr, unsigned long *val)
 		.r15 = *val,
 	};
 
-	if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
+	if (__tdx_hypercall_ret(&args))
 		return false;
 	*val = args.r11;
 	return true;
@@ -541,7 +541,7 @@ static bool handle_in(struct pt_regs *regs, int size, int port)
 	 * in TDX Guest-Host-Communication Interface (GHCI) section titled
 	 * "TDG.VP.VMCALL<Instruction.IO>".
 	 */
-	success = !__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT);
+	success = !__tdx_hypercall_ret(&args);
 
 	/* Update part of the register affected by the emulated instruction */
 	regs->ax &= ~mask;
diff --git a/arch/x86/crypto/aegis128-aesni-asm.S b/arch/x86/crypto/aegis128-aesni-asm.S
index cdf3215ec272..ad7f4c891625 100644
--- a/arch/x86/crypto/aegis128-aesni-asm.S
+++ b/arch/x86/crypto/aegis128-aesni-asm.S
@@ -201,8 +201,8 @@ SYM_FUNC_START(crypto_aegis128_aesni_init)
 	movdqa KEY, STATE4
 
 	/* load the constants: */
-	movdqa .Laegis128_const_0, STATE2
-	movdqa .Laegis128_const_1, STATE1
+	movdqa .Laegis128_const_0(%rip), STATE2
+	movdqa .Laegis128_const_1(%rip), STATE1
 	pxor STATE2, STATE3
 	pxor STATE1, STATE4
 
@@ -682,7 +682,7 @@ SYM_TYPED_FUNC_START(crypto_aegis128_aesni_dec_tail)
 	punpcklbw T0, T0
 	punpcklbw T0, T0
 	punpcklbw T0, T0
-	movdqa .Laegis128_counter, T1
+	movdqa .Laegis128_counter(%rip), T1
 	pcmpgtb T1, T0
 	pand T0, MSG
 
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index 837c1e0aa021..3ac7487ecad2 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -288,53 +288,53 @@ ALL_F:      .octa 0xffffffffffffffffffffffffffffffff
 	# Encrypt/Decrypt first few blocks
 
 	and	$(3<<4), %r12
-	jz	_initial_num_blocks_is_0_\@
+	jz	.L_initial_num_blocks_is_0_\@
 	cmp	$(2<<4), %r12
-	jb	_initial_num_blocks_is_1_\@
-	je	_initial_num_blocks_is_2_\@
-_initial_num_blocks_is_3_\@:
+	jb	.L_initial_num_blocks_is_1_\@
+	je	.L_initial_num_blocks_is_2_\@
+.L_initial_num_blocks_is_3_\@:
 	INITIAL_BLOCKS_ENC_DEC	%xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, \
 %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 5, 678, \operation
 	sub	$48, %r13
-	jmp	_initial_blocks_\@
-_initial_num_blocks_is_2_\@:
+	jmp	.L_initial_blocks_\@
+.L_initial_num_blocks_is_2_\@:
 	INITIAL_BLOCKS_ENC_DEC	%xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, \
 %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 6, 78, \operation
 	sub	$32, %r13
-	jmp	_initial_blocks_\@
-_initial_num_blocks_is_1_\@:
+	jmp	.L_initial_blocks_\@
+.L_initial_num_blocks_is_1_\@:
 	INITIAL_BLOCKS_ENC_DEC	%xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, \
 %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 7, 8, \operation
 	sub	$16, %r13
-	jmp	_initial_blocks_\@
-_initial_num_blocks_is_0_\@:
+	jmp	.L_initial_blocks_\@
+.L_initial_num_blocks_is_0_\@:
 	INITIAL_BLOCKS_ENC_DEC	%xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, \
 %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 8, 0, \operation
-_initial_blocks_\@:
+.L_initial_blocks_\@:
 
 	# Main loop - Encrypt/Decrypt remaining blocks
 
 	test	%r13, %r13
-	je	_zero_cipher_left_\@
+	je	.L_zero_cipher_left_\@
 	sub	$64, %r13
-	je	_four_cipher_left_\@
-_crypt_by_4_\@:
+	je	.L_four_cipher_left_\@
+.L_crypt_by_4_\@:
 	GHASH_4_ENCRYPT_4_PARALLEL_\operation	%xmm9, %xmm10, %xmm11, %xmm12, \
 	%xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, \
 	%xmm7, %xmm8, enc
 	add	$64, %r11
 	sub	$64, %r13
-	jne	_crypt_by_4_\@
-_four_cipher_left_\@:
+	jne	.L_crypt_by_4_\@
+.L_four_cipher_left_\@:
 	GHASH_LAST_4	%xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, \
 %xmm15, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8
-_zero_cipher_left_\@:
+.L_zero_cipher_left_\@:
 	movdqu %xmm8, AadHash(%arg2)
 	movdqu %xmm0, CurCount(%arg2)
 
 	mov	%arg5, %r13
 	and	$15, %r13			# %r13 = arg5 (mod 16)
-	je	_multiple_of_16_bytes_\@
+	je	.L_multiple_of_16_bytes_\@
 
 	mov %r13, PBlockLen(%arg2)
 
@@ -348,14 +348,14 @@ _zero_cipher_left_\@:
 	movdqu %xmm0, PBlockEncKey(%arg2)
 
 	cmp	$16, %arg5
-	jge _large_enough_update_\@
+	jge	.L_large_enough_update_\@
 
 	lea (%arg4,%r11,1), %r10
 	mov %r13, %r12
 	READ_PARTIAL_BLOCK %r10 %r12 %xmm2 %xmm1
-	jmp _data_read_\@
+	jmp	.L_data_read_\@
 
-_large_enough_update_\@:
+.L_large_enough_update_\@:
 	sub	$16, %r11
 	add	%r13, %r11
 
@@ -374,7 +374,7 @@ _large_enough_update_\@:
 	# shift right 16-r13 bytes
 	pshufb  %xmm2, %xmm1
 
-_data_read_\@:
+.L_data_read_\@:
 	lea ALL_F+16(%rip), %r12
 	sub %r13, %r12
 
@@ -409,19 +409,19 @@ _data_read_\@:
 	# Output %r13 bytes
 	movq %xmm0, %rax
 	cmp $8, %r13
-	jle _less_than_8_bytes_left_\@
+	jle .L_less_than_8_bytes_left_\@
 	mov %rax, (%arg3 , %r11, 1)
 	add $8, %r11
 	psrldq $8, %xmm0
 	movq %xmm0, %rax
 	sub $8, %r13
-_less_than_8_bytes_left_\@:
+.L_less_than_8_bytes_left_\@:
 	mov %al,  (%arg3, %r11, 1)
 	add $1, %r11
 	shr $8, %rax
 	sub $1, %r13
-	jne _less_than_8_bytes_left_\@
-_multiple_of_16_bytes_\@:
+	jne .L_less_than_8_bytes_left_\@
+.L_multiple_of_16_bytes_\@:
 .endm
 
 # GCM_COMPLETE Finishes update of tag of last partial block
@@ -434,11 +434,11 @@ _multiple_of_16_bytes_\@:
 	mov PBlockLen(%arg2), %r12
 
 	test %r12, %r12
-	je _partial_done\@
+	je .L_partial_done\@
 
 	GHASH_MUL %xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6
 
-_partial_done\@:
+.L_partial_done\@:
 	mov AadLen(%arg2), %r12  # %r13 = aadLen (number of bytes)
 	shl	$3, %r12		  # convert into number of bits
 	movd	%r12d, %xmm15		  # len(A) in %xmm15
@@ -457,44 +457,44 @@ _partial_done\@:
 	movdqu OrigIV(%arg2), %xmm0       # %xmm0 = Y0
 	ENCRYPT_SINGLE_BLOCK	%xmm0,  %xmm1	  # E(K, Y0)
 	pxor	%xmm8, %xmm0
-_return_T_\@:
+.L_return_T_\@:
 	mov	\AUTHTAG, %r10                     # %r10 = authTag
 	mov	\AUTHTAGLEN, %r11                    # %r11 = auth_tag_len
 	cmp	$16, %r11
-	je	_T_16_\@
+	je	.L_T_16_\@
 	cmp	$8, %r11
-	jl	_T_4_\@
-_T_8_\@:
+	jl	.L_T_4_\@
+.L_T_8_\@:
 	movq	%xmm0, %rax
 	mov	%rax, (%r10)
 	add	$8, %r10
 	sub	$8, %r11
 	psrldq	$8, %xmm0
 	test	%r11, %r11
-	je	_return_T_done_\@
-_T_4_\@:
+	je	.L_return_T_done_\@
+.L_T_4_\@:
 	movd	%xmm0, %eax
 	mov	%eax, (%r10)
 	add	$4, %r10
 	sub	$4, %r11
 	psrldq	$4, %xmm0
 	test	%r11, %r11
-	je	_return_T_done_\@
-_T_123_\@:
+	je	.L_return_T_done_\@
+.L_T_123_\@:
 	movd	%xmm0, %eax
 	cmp	$2, %r11
-	jl	_T_1_\@
+	jl	.L_T_1_\@
 	mov	%ax, (%r10)
 	cmp	$2, %r11
-	je	_return_T_done_\@
+	je	.L_return_T_done_\@
 	add	$2, %r10
 	sar	$16, %eax
-_T_1_\@:
+.L_T_1_\@:
 	mov	%al, (%r10)
-	jmp	_return_T_done_\@
-_T_16_\@:
+	jmp	.L_return_T_done_\@
+.L_T_16_\@:
 	movdqu	%xmm0, (%r10)
-_return_T_done_\@:
+.L_return_T_done_\@:
 .endm
 
 #ifdef __x86_64__
@@ -563,30 +563,30 @@ _return_T_done_\@:
 # Clobbers %rax, DLEN and XMM1
 .macro READ_PARTIAL_BLOCK DPTR DLEN XMM1 XMMDst
         cmp $8, \DLEN
-        jl _read_lt8_\@
+        jl .L_read_lt8_\@
         mov (\DPTR), %rax
         movq %rax, \XMMDst
         sub $8, \DLEN
-        jz _done_read_partial_block_\@
+        jz .L_done_read_partial_block_\@
 	xor %eax, %eax
-_read_next_byte_\@:
+.L_read_next_byte_\@:
         shl $8, %rax
         mov 7(\DPTR, \DLEN, 1), %al
         dec \DLEN
-        jnz _read_next_byte_\@
+        jnz .L_read_next_byte_\@
         movq %rax, \XMM1
 	pslldq $8, \XMM1
         por \XMM1, \XMMDst
-	jmp _done_read_partial_block_\@
-_read_lt8_\@:
+	jmp .L_done_read_partial_block_\@
+.L_read_lt8_\@:
 	xor %eax, %eax
-_read_next_byte_lt8_\@:
+.L_read_next_byte_lt8_\@:
         shl $8, %rax
         mov -1(\DPTR, \DLEN, 1), %al
         dec \DLEN
-        jnz _read_next_byte_lt8_\@
+        jnz .L_read_next_byte_lt8_\@
         movq %rax, \XMMDst
-_done_read_partial_block_\@:
+.L_done_read_partial_block_\@:
 .endm
 
 # CALC_AAD_HASH: Calculates the hash of the data which will not be encrypted.
@@ -600,8 +600,8 @@ _done_read_partial_block_\@:
 	pxor	   \TMP6, \TMP6
 
 	cmp	   $16, %r11
-	jl	   _get_AAD_rest\@
-_get_AAD_blocks\@:
+	jl	   .L_get_AAD_rest\@
+.L_get_AAD_blocks\@:
 	movdqu	   (%r10), \TMP7
 	pshufb	   %xmm14, \TMP7 # byte-reflect the AAD data
 	pxor	   \TMP7, \TMP6
@@ -609,14 +609,14 @@ _get_AAD_blocks\@:
 	add	   $16, %r10
 	sub	   $16, %r11
 	cmp	   $16, %r11
-	jge	   _get_AAD_blocks\@
+	jge	   .L_get_AAD_blocks\@
 
 	movdqu	   \TMP6, \TMP7
 
 	/* read the last <16B of AAD */
-_get_AAD_rest\@:
+.L_get_AAD_rest\@:
 	test	   %r11, %r11
-	je	   _get_AAD_done\@
+	je	   .L_get_AAD_done\@
 
 	READ_PARTIAL_BLOCK %r10, %r11, \TMP1, \TMP7
 	pshufb	   %xmm14, \TMP7 # byte-reflect the AAD data
@@ -624,7 +624,7 @@ _get_AAD_rest\@:
 	GHASH_MUL  \TMP7, \HASHKEY, \TMP1, \TMP2, \TMP3, \TMP4, \TMP5
 	movdqu \TMP7, \TMP6
 
-_get_AAD_done\@:
+.L_get_AAD_done\@:
 	movdqu \TMP6, AadHash(%arg2)
 .endm
 
@@ -637,21 +637,21 @@ _get_AAD_done\@:
 	AAD_HASH operation
 	mov 	PBlockLen(%arg2), %r13
 	test	%r13, %r13
-	je	_partial_block_done_\@	# Leave Macro if no partial blocks
+	je	.L_partial_block_done_\@	# Leave Macro if no partial blocks
 	# Read in input data without over reading
 	cmp	$16, \PLAIN_CYPH_LEN
-	jl	_fewer_than_16_bytes_\@
+	jl	.L_fewer_than_16_bytes_\@
 	movups	(\PLAIN_CYPH_IN), %xmm1	# If more than 16 bytes, just fill xmm
-	jmp	_data_read_\@
+	jmp	.L_data_read_\@
 
-_fewer_than_16_bytes_\@:
+.L_fewer_than_16_bytes_\@:
 	lea	(\PLAIN_CYPH_IN, \DATA_OFFSET, 1), %r10
 	mov	\PLAIN_CYPH_LEN, %r12
 	READ_PARTIAL_BLOCK %r10 %r12 %xmm0 %xmm1
 
 	mov PBlockLen(%arg2), %r13
 
-_data_read_\@:				# Finished reading in data
+.L_data_read_\@:				# Finished reading in data
 
 	movdqu	PBlockEncKey(%arg2), %xmm9
 	movdqu	HashKey(%arg2), %xmm13
@@ -674,9 +674,9 @@ _data_read_\@:				# Finished reading in data
 	sub	$16, %r10
 	# Determine if if partial block is not being filled and
 	# shift mask accordingly
-	jge	_no_extra_mask_1_\@
+	jge	.L_no_extra_mask_1_\@
 	sub	%r10, %r12
-_no_extra_mask_1_\@:
+.L_no_extra_mask_1_\@:
 
 	movdqu	ALL_F-SHIFT_MASK(%r12), %xmm1
 	# get the appropriate mask to mask out bottom r13 bytes of xmm9
@@ -689,17 +689,17 @@ _no_extra_mask_1_\@:
 	pxor	%xmm3, \AAD_HASH
 
 	test	%r10, %r10
-	jl	_partial_incomplete_1_\@
+	jl	.L_partial_incomplete_1_\@
 
 	# GHASH computation for the last <16 Byte block
 	GHASH_MUL \AAD_HASH, %xmm13, %xmm0, %xmm10, %xmm11, %xmm5, %xmm6
 	xor	%eax, %eax
 
 	mov	%rax, PBlockLen(%arg2)
-	jmp	_dec_done_\@
-_partial_incomplete_1_\@:
+	jmp	.L_dec_done_\@
+.L_partial_incomplete_1_\@:
 	add	\PLAIN_CYPH_LEN, PBlockLen(%arg2)
-_dec_done_\@:
+.L_dec_done_\@:
 	movdqu	\AAD_HASH, AadHash(%arg2)
 .else
 	pxor	%xmm1, %xmm9			# Plaintext XOR E(K, Yn)
@@ -710,9 +710,9 @@ _dec_done_\@:
 	sub	$16, %r10
 	# Determine if if partial block is not being filled and
 	# shift mask accordingly
-	jge	_no_extra_mask_2_\@
+	jge	.L_no_extra_mask_2_\@
 	sub	%r10, %r12
-_no_extra_mask_2_\@:
+.L_no_extra_mask_2_\@:
 
 	movdqu	ALL_F-SHIFT_MASK(%r12), %xmm1
 	# get the appropriate mask to mask out bottom r13 bytes of xmm9
@@ -724,17 +724,17 @@ _no_extra_mask_2_\@:
 	pxor	%xmm9, \AAD_HASH
 
 	test	%r10, %r10
-	jl	_partial_incomplete_2_\@
+	jl	.L_partial_incomplete_2_\@
 
 	# GHASH computation for the last <16 Byte block
 	GHASH_MUL \AAD_HASH, %xmm13, %xmm0, %xmm10, %xmm11, %xmm5, %xmm6
 	xor	%eax, %eax
 
 	mov	%rax, PBlockLen(%arg2)
-	jmp	_encode_done_\@
-_partial_incomplete_2_\@:
+	jmp	.L_encode_done_\@
+.L_partial_incomplete_2_\@:
 	add	\PLAIN_CYPH_LEN, PBlockLen(%arg2)
-_encode_done_\@:
+.L_encode_done_\@:
 	movdqu	\AAD_HASH, AadHash(%arg2)
 
 	movdqa	SHUF_MASK(%rip), %xmm10
@@ -744,32 +744,32 @@ _encode_done_\@:
 .endif
 	# output encrypted Bytes
 	test	%r10, %r10
-	jl	_partial_fill_\@
+	jl	.L_partial_fill_\@
 	mov	%r13, %r12
 	mov	$16, %r13
 	# Set r13 to be the number of bytes to write out
 	sub	%r12, %r13
-	jmp	_count_set_\@
-_partial_fill_\@:
+	jmp	.L_count_set_\@
+.L_partial_fill_\@:
 	mov	\PLAIN_CYPH_LEN, %r13
-_count_set_\@:
+.L_count_set_\@:
 	movdqa	%xmm9, %xmm0
 	movq	%xmm0, %rax
 	cmp	$8, %r13
-	jle	_less_than_8_bytes_left_\@
+	jle	.L_less_than_8_bytes_left_\@
 
 	mov	%rax, (\CYPH_PLAIN_OUT, \DATA_OFFSET, 1)
 	add	$8, \DATA_OFFSET
 	psrldq	$8, %xmm0
 	movq	%xmm0, %rax
 	sub	$8, %r13
-_less_than_8_bytes_left_\@:
+.L_less_than_8_bytes_left_\@:
 	movb	%al, (\CYPH_PLAIN_OUT, \DATA_OFFSET, 1)
 	add	$1, \DATA_OFFSET
 	shr	$8, %rax
 	sub	$1, %r13
-	jne	_less_than_8_bytes_left_\@
-_partial_block_done_\@:
+	jne	.L_less_than_8_bytes_left_\@
+.L_partial_block_done_\@:
 .endm # PARTIAL_BLOCK
 
 /*
@@ -813,14 +813,14 @@ _partial_block_done_\@:
 	shr	$2,%eax				# 128->4, 192->6, 256->8
 	add	$5,%eax			      # 128->9, 192->11, 256->13
 
-aes_loop_initial_\@:
+.Laes_loop_initial_\@:
 	MOVADQ	(%r10),\TMP1
 .irpc	index, \i_seq
 	aesenc	\TMP1, %xmm\index
 .endr
 	add	$16,%r10
 	sub	$1,%eax
-	jnz	aes_loop_initial_\@
+	jnz	.Laes_loop_initial_\@
 
 	MOVADQ	(%r10), \TMP1
 .irpc index, \i_seq
@@ -861,7 +861,7 @@ aes_loop_initial_\@:
 	GHASH_MUL  %xmm8, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
 .endif
 	cmp	   $64, %r13
-	jl	_initial_blocks_done\@
+	jl	.L_initial_blocks_done\@
 	# no need for precomputed values
 /*
 *
@@ -908,18 +908,18 @@ aes_loop_initial_\@:
 	mov	   keysize,%eax
 	shr	   $2,%eax			# 128->4, 192->6, 256->8
 	sub	   $4,%eax			# 128->0, 192->2, 256->4
-	jz	   aes_loop_pre_done\@
+	jz	   .Laes_loop_pre_done\@
 
-aes_loop_pre_\@:
+.Laes_loop_pre_\@:
 	MOVADQ	   (%r10),\TMP2
 .irpc	index, 1234
 	aesenc	   \TMP2, %xmm\index
 .endr
 	add	   $16,%r10
 	sub	   $1,%eax
-	jnz	   aes_loop_pre_\@
+	jnz	   .Laes_loop_pre_\@
 
-aes_loop_pre_done\@:
+.Laes_loop_pre_done\@:
 	MOVADQ	   (%r10), \TMP2
 	aesenclast \TMP2, \XMM1
 	aesenclast \TMP2, \XMM2
@@ -963,7 +963,7 @@ aes_loop_pre_done\@:
 	pshufb %xmm14, \XMM3 # perform a 16 byte swap
 	pshufb %xmm14, \XMM4 # perform a 16 byte swap
 
-_initial_blocks_done\@:
+.L_initial_blocks_done\@:
 
 .endm
 
@@ -1095,18 +1095,18 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 	mov	  keysize,%eax
 	shr	  $2,%eax			# 128->4, 192->6, 256->8
 	sub	  $4,%eax			# 128->0, 192->2, 256->4
-	jz	  aes_loop_par_enc_done\@
+	jz	  .Laes_loop_par_enc_done\@
 
-aes_loop_par_enc\@:
+.Laes_loop_par_enc\@:
 	MOVADQ	  (%r10),\TMP3
 .irpc	index, 1234
 	aesenc	  \TMP3, %xmm\index
 .endr
 	add	  $16,%r10
 	sub	  $1,%eax
-	jnz	  aes_loop_par_enc\@
+	jnz	  .Laes_loop_par_enc\@
 
-aes_loop_par_enc_done\@:
+.Laes_loop_par_enc_done\@:
 	MOVADQ	  (%r10), \TMP3
 	aesenclast \TMP3, \XMM1           # Round 10
 	aesenclast \TMP3, \XMM2
@@ -1303,18 +1303,18 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 	mov	  keysize,%eax
 	shr	  $2,%eax		        # 128->4, 192->6, 256->8
 	sub	  $4,%eax			# 128->0, 192->2, 256->4
-	jz	  aes_loop_par_dec_done\@
+	jz	  .Laes_loop_par_dec_done\@
 
-aes_loop_par_dec\@:
+.Laes_loop_par_dec\@:
 	MOVADQ	  (%r10),\TMP3
 .irpc	index, 1234
 	aesenc	  \TMP3, %xmm\index
 .endr
 	add	  $16,%r10
 	sub	  $1,%eax
-	jnz	  aes_loop_par_dec\@
+	jnz	  .Laes_loop_par_dec\@
 
-aes_loop_par_dec_done\@:
+.Laes_loop_par_dec_done\@:
 	MOVADQ	  (%r10), \TMP3
 	aesenclast \TMP3, \XMM1           # last round
 	aesenclast \TMP3, \XMM2
@@ -2717,7 +2717,7 @@ SYM_FUNC_END(aesni_cts_cbc_dec)
  *	BSWAP_MASK == endian swapping mask
  */
 SYM_FUNC_START_LOCAL(_aesni_inc_init)
-	movaps .Lbswap_mask, BSWAP_MASK
+	movaps .Lbswap_mask(%rip), BSWAP_MASK
 	movaps IV, CTR
 	pshufb BSWAP_MASK, CTR
 	mov $1, TCTR_LOW
diff --git a/arch/x86/crypto/aesni-intel_avx-x86_64.S b/arch/x86/crypto/aesni-intel_avx-x86_64.S
index 0852ab573fd3..46cddd78857b 100644
--- a/arch/x86/crypto/aesni-intel_avx-x86_64.S
+++ b/arch/x86/crypto/aesni-intel_avx-x86_64.S
@@ -154,30 +154,6 @@ SHIFT_MASK:      .octa     0x0f0e0d0c0b0a09080706050403020100
 ALL_F:           .octa     0xffffffffffffffffffffffffffffffff
                  .octa     0x00000000000000000000000000000000
 
-.section .rodata
-.align 16
-.type aad_shift_arr, @object
-.size aad_shift_arr, 272
-aad_shift_arr:
-        .octa     0xffffffffffffffffffffffffffffffff
-        .octa     0xffffffffffffffffffffffffffffff0C
-        .octa     0xffffffffffffffffffffffffffff0D0C
-        .octa     0xffffffffffffffffffffffffff0E0D0C
-        .octa     0xffffffffffffffffffffffff0F0E0D0C
-        .octa     0xffffffffffffffffffffff0C0B0A0908
-        .octa     0xffffffffffffffffffff0D0C0B0A0908
-        .octa     0xffffffffffffffffff0E0D0C0B0A0908
-        .octa     0xffffffffffffffff0F0E0D0C0B0A0908
-        .octa     0xffffffffffffff0C0B0A090807060504
-        .octa     0xffffffffffff0D0C0B0A090807060504
-        .octa     0xffffffffff0E0D0C0B0A090807060504
-        .octa     0xffffffff0F0E0D0C0B0A090807060504
-        .octa     0xffffff0C0B0A09080706050403020100
-        .octa     0xffff0D0C0B0A09080706050403020100
-        .octa     0xff0E0D0C0B0A09080706050403020100
-        .octa     0x0F0E0D0C0B0A09080706050403020100
-
-
 .text
 
 
@@ -302,68 +278,68 @@ VARIABLE_OFFSET = 16*8
         mov     %r13, %r12
         shr     $4, %r12
         and     $7, %r12
-        jz      _initial_num_blocks_is_0\@
+        jz      .L_initial_num_blocks_is_0\@
 
         cmp     $7, %r12
-        je      _initial_num_blocks_is_7\@
+        je      .L_initial_num_blocks_is_7\@
         cmp     $6, %r12
-        je      _initial_num_blocks_is_6\@
+        je      .L_initial_num_blocks_is_6\@
         cmp     $5, %r12
-        je      _initial_num_blocks_is_5\@
+        je      .L_initial_num_blocks_is_5\@
         cmp     $4, %r12
-        je      _initial_num_blocks_is_4\@
+        je      .L_initial_num_blocks_is_4\@
         cmp     $3, %r12
-        je      _initial_num_blocks_is_3\@
+        je      .L_initial_num_blocks_is_3\@
         cmp     $2, %r12
-        je      _initial_num_blocks_is_2\@
+        je      .L_initial_num_blocks_is_2\@
 
-        jmp     _initial_num_blocks_is_1\@
+        jmp     .L_initial_num_blocks_is_1\@
 
-_initial_num_blocks_is_7\@:
+.L_initial_num_blocks_is_7\@:
         \INITIAL_BLOCKS  \REP, 7, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC
         sub     $16*7, %r13
-        jmp     _initial_blocks_encrypted\@
+        jmp     .L_initial_blocks_encrypted\@
 
-_initial_num_blocks_is_6\@:
+.L_initial_num_blocks_is_6\@:
         \INITIAL_BLOCKS  \REP, 6, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC
         sub     $16*6, %r13
-        jmp     _initial_blocks_encrypted\@
+        jmp     .L_initial_blocks_encrypted\@
 
-_initial_num_blocks_is_5\@:
+.L_initial_num_blocks_is_5\@:
         \INITIAL_BLOCKS  \REP, 5, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC
         sub     $16*5, %r13
-        jmp     _initial_blocks_encrypted\@
+        jmp     .L_initial_blocks_encrypted\@
 
-_initial_num_blocks_is_4\@:
+.L_initial_num_blocks_is_4\@:
         \INITIAL_BLOCKS  \REP, 4, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC
         sub     $16*4, %r13
-        jmp     _initial_blocks_encrypted\@
+        jmp     .L_initial_blocks_encrypted\@
 
-_initial_num_blocks_is_3\@:
+.L_initial_num_blocks_is_3\@:
         \INITIAL_BLOCKS  \REP, 3, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC
         sub     $16*3, %r13
-        jmp     _initial_blocks_encrypted\@
+        jmp     .L_initial_blocks_encrypted\@
 
-_initial_num_blocks_is_2\@:
+.L_initial_num_blocks_is_2\@:
         \INITIAL_BLOCKS  \REP, 2, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC
         sub     $16*2, %r13
-        jmp     _initial_blocks_encrypted\@
+        jmp     .L_initial_blocks_encrypted\@
 
-_initial_num_blocks_is_1\@:
+.L_initial_num_blocks_is_1\@:
         \INITIAL_BLOCKS  \REP, 1, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC
         sub     $16*1, %r13
-        jmp     _initial_blocks_encrypted\@
+        jmp     .L_initial_blocks_encrypted\@
 
-_initial_num_blocks_is_0\@:
+.L_initial_num_blocks_is_0\@:
         \INITIAL_BLOCKS  \REP, 0, %xmm12, %xmm13, %xmm14, %xmm15, %xmm11, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm10, %xmm0, \ENC_DEC
 
 
-_initial_blocks_encrypted\@:
+.L_initial_blocks_encrypted\@:
         test    %r13, %r13
-        je      _zero_cipher_left\@
+        je      .L_zero_cipher_left\@
 
         sub     $128, %r13
-        je      _eight_cipher_left\@
+        je      .L_eight_cipher_left\@
 
 
 
@@ -373,9 +349,9 @@ _initial_blocks_encrypted\@:
         vpshufb SHUF_MASK(%rip), %xmm9, %xmm9
 
 
-_encrypt_by_8_new\@:
+.L_encrypt_by_8_new\@:
         cmp     $(255-8), %r15d
-        jg      _encrypt_by_8\@
+        jg      .L_encrypt_by_8\@
 
 
 
@@ -383,30 +359,30 @@ _encrypt_by_8_new\@:
         \GHASH_8_ENCRYPT_8_PARALLEL      \REP, %xmm0, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm15, out_order, \ENC_DEC
         add     $128, %r11
         sub     $128, %r13
-        jne     _encrypt_by_8_new\@
+        jne     .L_encrypt_by_8_new\@
 
         vpshufb SHUF_MASK(%rip), %xmm9, %xmm9
-        jmp     _eight_cipher_left\@
+        jmp     .L_eight_cipher_left\@
 
-_encrypt_by_8\@:
+.L_encrypt_by_8\@:
         vpshufb SHUF_MASK(%rip), %xmm9, %xmm9
         add     $8, %r15b
         \GHASH_8_ENCRYPT_8_PARALLEL      \REP, %xmm0, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm9, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, %xmm15, in_order, \ENC_DEC
         vpshufb SHUF_MASK(%rip), %xmm9, %xmm9
         add     $128, %r11
         sub     $128, %r13
-        jne     _encrypt_by_8_new\@
+        jne     .L_encrypt_by_8_new\@
 
         vpshufb SHUF_MASK(%rip), %xmm9, %xmm9
 
 
 
 
-_eight_cipher_left\@:
+.L_eight_cipher_left\@:
         \GHASH_LAST_8    %xmm0, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm15, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8
 
 
-_zero_cipher_left\@:
+.L_zero_cipher_left\@:
         vmovdqu %xmm14, AadHash(arg2)
         vmovdqu %xmm9, CurCount(arg2)
 
@@ -414,7 +390,7 @@ _zero_cipher_left\@:
         mov     arg5, %r13
         and     $15, %r13                            # r13 = (arg5 mod 16)
 
-        je      _multiple_of_16_bytes\@
+        je      .L_multiple_of_16_bytes\@
 
         # handle the last <16 Byte block separately
 
@@ -428,7 +404,7 @@ _zero_cipher_left\@:
         vmovdqu %xmm9, PBlockEncKey(arg2)
 
         cmp $16, arg5
-        jge _large_enough_update\@
+        jge .L_large_enough_update\@
 
         lea (arg4,%r11,1), %r10
         mov %r13, %r12
@@ -440,9 +416,9 @@ _zero_cipher_left\@:
 						     # able to shift 16-r13 bytes (r13 is the
 	# number of bytes in plaintext mod 16)
 
-        jmp _final_ghash_mul\@
+        jmp .L_final_ghash_mul\@
 
-_large_enough_update\@:
+.L_large_enough_update\@:
         sub $16, %r11
         add %r13, %r11
 
@@ -461,7 +437,7 @@ _large_enough_update\@:
         # shift right 16-r13 bytes
         vpshufb  %xmm2, %xmm1, %xmm1
 
-_final_ghash_mul\@:
+.L_final_ghash_mul\@:
         .if  \ENC_DEC ==  DEC
         vmovdqa %xmm1, %xmm2
         vpxor   %xmm1, %xmm9, %xmm9                  # Plaintext XOR E(K, Yn)
@@ -490,7 +466,7 @@ _final_ghash_mul\@:
         # output r13 Bytes
         vmovq   %xmm9, %rax
         cmp     $8, %r13
-        jle     _less_than_8_bytes_left\@
+        jle     .L_less_than_8_bytes_left\@
 
         mov     %rax, (arg3 , %r11)
         add     $8, %r11
@@ -498,15 +474,15 @@ _final_ghash_mul\@:
         vmovq   %xmm9, %rax
         sub     $8, %r13
 
-_less_than_8_bytes_left\@:
+.L_less_than_8_bytes_left\@:
         movb    %al, (arg3 , %r11)
         add     $1, %r11
         shr     $8, %rax
         sub     $1, %r13
-        jne     _less_than_8_bytes_left\@
+        jne     .L_less_than_8_bytes_left\@
         #############################
 
-_multiple_of_16_bytes\@:
+.L_multiple_of_16_bytes\@:
 .endm
 
 
@@ -519,12 +495,12 @@ _multiple_of_16_bytes\@:
 
         mov PBlockLen(arg2), %r12
         test %r12, %r12
-        je _partial_done\@
+        je .L_partial_done\@
 
 	#GHASH computation for the last <16 Byte block
         \GHASH_MUL       %xmm14, %xmm13, %xmm0, %xmm10, %xmm11, %xmm5, %xmm6
 
-_partial_done\@:
+.L_partial_done\@:
         mov AadLen(arg2), %r12                          # r12 = aadLen (number of bytes)
         shl     $3, %r12                             # convert into number of bits
         vmovd   %r12d, %xmm15                        # len(A) in xmm15
@@ -547,49 +523,49 @@ _partial_done\@:
 
 
 
-_return_T\@:
+.L_return_T\@:
         mov     \AUTH_TAG, %r10              # r10 = authTag
         mov     \AUTH_TAG_LEN, %r11              # r11 = auth_tag_len
 
         cmp     $16, %r11
-        je      _T_16\@
+        je      .L_T_16\@
 
         cmp     $8, %r11
-        jl      _T_4\@
+        jl      .L_T_4\@
 
-_T_8\@:
+.L_T_8\@:
         vmovq   %xmm9, %rax
         mov     %rax, (%r10)
         add     $8, %r10
         sub     $8, %r11
         vpsrldq $8, %xmm9, %xmm9
         test    %r11, %r11
-        je     _return_T_done\@
-_T_4\@:
+        je     .L_return_T_done\@
+.L_T_4\@:
         vmovd   %xmm9, %eax
         mov     %eax, (%r10)
         add     $4, %r10
         sub     $4, %r11
         vpsrldq     $4, %xmm9, %xmm9
         test    %r11, %r11
-        je     _return_T_done\@
-_T_123\@:
+        je     .L_return_T_done\@
+.L_T_123\@:
         vmovd     %xmm9, %eax
         cmp     $2, %r11
-        jl     _T_1\@
+        jl     .L_T_1\@
         mov     %ax, (%r10)
         cmp     $2, %r11
-        je     _return_T_done\@
+        je     .L_return_T_done\@
         add     $2, %r10
         sar     $16, %eax
-_T_1\@:
+.L_T_1\@:
         mov     %al, (%r10)
-        jmp     _return_T_done\@
+        jmp     .L_return_T_done\@
 
-_T_16\@:
+.L_T_16\@:
         vmovdqu %xmm9, (%r10)
 
-_return_T_done\@:
+.L_return_T_done\@:
 .endm
 
 .macro CALC_AAD_HASH GHASH_MUL AAD AADLEN T1 T2 T3 T4 T5 T6 T7 T8
@@ -603,8 +579,8 @@ _return_T_done\@:
 	vpxor   \T8, \T8, \T8
 	vpxor   \T7, \T7, \T7
 	cmp     $16, %r11
-	jl      _get_AAD_rest8\@
-_get_AAD_blocks\@:
+	jl      .L_get_AAD_rest8\@
+.L_get_AAD_blocks\@:
 	vmovdqu (%r10), \T7
 	vpshufb SHUF_MASK(%rip), \T7, \T7
 	vpxor   \T7, \T8, \T8
@@ -613,29 +589,29 @@ _get_AAD_blocks\@:
 	sub     $16, %r12
 	sub     $16, %r11
 	cmp     $16, %r11
-	jge     _get_AAD_blocks\@
+	jge     .L_get_AAD_blocks\@
 	vmovdqu \T8, \T7
 	test    %r11, %r11
-	je      _get_AAD_done\@
+	je      .L_get_AAD_done\@
 
 	vpxor   \T7, \T7, \T7
 
 	/* read the last <16B of AAD. since we have at least 4B of
 	data right after the AAD (the ICV, and maybe some CT), we can
 	read 4B/8B blocks safely, and then get rid of the extra stuff */
-_get_AAD_rest8\@:
+.L_get_AAD_rest8\@:
 	cmp     $4, %r11
-	jle     _get_AAD_rest4\@
+	jle     .L_get_AAD_rest4\@
 	movq    (%r10), \T1
 	add     $8, %r10
 	sub     $8, %r11
 	vpslldq $8, \T1, \T1
 	vpsrldq $8, \T7, \T7
 	vpxor   \T1, \T7, \T7
-	jmp     _get_AAD_rest8\@
-_get_AAD_rest4\@:
+	jmp     .L_get_AAD_rest8\@
+.L_get_AAD_rest4\@:
 	test    %r11, %r11
-	jle      _get_AAD_rest0\@
+	jle     .L_get_AAD_rest0\@
 	mov     (%r10), %eax
 	movq    %rax, \T1
 	add     $4, %r10
@@ -643,20 +619,22 @@ _get_AAD_rest4\@:
 	vpslldq $12, \T1, \T1
 	vpsrldq $4, \T7, \T7
 	vpxor   \T1, \T7, \T7
-_get_AAD_rest0\@:
+.L_get_AAD_rest0\@:
 	/* finalize: shift out the extra bytes we read, and align
 	left. since pslldq can only shift by an immediate, we use
-	vpshufb and an array of shuffle masks */
-	movq    %r12, %r11
-	salq    $4, %r11
-	vmovdqu  aad_shift_arr(%r11), \T1
-	vpshufb \T1, \T7, \T7
-_get_AAD_rest_final\@:
+	vpshufb and a pair of shuffle masks */
+	leaq	ALL_F(%rip), %r11
+	subq	%r12, %r11
+	vmovdqu	16(%r11), \T1
+	andq	$~3, %r11
+	vpshufb (%r11), \T7, \T7
+	vpand	\T1, \T7, \T7
+.L_get_AAD_rest_final\@:
 	vpshufb SHUF_MASK(%rip), \T7, \T7
 	vpxor   \T8, \T7, \T7
 	\GHASH_MUL       \T7, \T2, \T1, \T3, \T4, \T5, \T6
 
-_get_AAD_done\@:
+.L_get_AAD_done\@:
         vmovdqu \T7, AadHash(arg2)
 .endm
 
@@ -707,28 +685,28 @@ _get_AAD_done\@:
         vpxor \XMMDst, \XMMDst, \XMMDst
 
         cmp $8, \DLEN
-        jl _read_lt8_\@
+        jl .L_read_lt8_\@
         mov (\DPTR), %rax
         vpinsrq $0, %rax, \XMMDst, \XMMDst
         sub $8, \DLEN
-        jz _done_read_partial_block_\@
+        jz .L_done_read_partial_block_\@
         xor %eax, %eax
-_read_next_byte_\@:
+.L_read_next_byte_\@:
         shl $8, %rax
         mov 7(\DPTR, \DLEN, 1), %al
         dec \DLEN
-        jnz _read_next_byte_\@
+        jnz .L_read_next_byte_\@
         vpinsrq $1, %rax, \XMMDst, \XMMDst
-        jmp _done_read_partial_block_\@
-_read_lt8_\@:
+        jmp .L_done_read_partial_block_\@
+.L_read_lt8_\@:
         xor %eax, %eax
-_read_next_byte_lt8_\@:
+.L_read_next_byte_lt8_\@:
         shl $8, %rax
         mov -1(\DPTR, \DLEN, 1), %al
         dec \DLEN
-        jnz _read_next_byte_lt8_\@
+        jnz .L_read_next_byte_lt8_\@
         vpinsrq $0, %rax, \XMMDst, \XMMDst
-_done_read_partial_block_\@:
+.L_done_read_partial_block_\@:
 .endm
 
 # PARTIAL_BLOCK: Handles encryption/decryption and the tag partial blocks
@@ -740,21 +718,21 @@ _done_read_partial_block_\@:
         AAD_HASH ENC_DEC
         mov 	PBlockLen(arg2), %r13
         test	%r13, %r13
-        je	_partial_block_done_\@	# Leave Macro if no partial blocks
+        je	.L_partial_block_done_\@	# Leave Macro if no partial blocks
         # Read in input data without over reading
         cmp	$16, \PLAIN_CYPH_LEN
-        jl	_fewer_than_16_bytes_\@
+        jl	.L_fewer_than_16_bytes_\@
         vmovdqu	(\PLAIN_CYPH_IN), %xmm1	# If more than 16 bytes, just fill xmm
-        jmp	_data_read_\@
+        jmp	.L_data_read_\@
 
-_fewer_than_16_bytes_\@:
+.L_fewer_than_16_bytes_\@:
         lea	(\PLAIN_CYPH_IN, \DATA_OFFSET, 1), %r10
         mov	\PLAIN_CYPH_LEN, %r12
         READ_PARTIAL_BLOCK %r10 %r12 %xmm1
 
         mov PBlockLen(arg2), %r13
 
-_data_read_\@:				# Finished reading in data
+.L_data_read_\@:				# Finished reading in data
 
         vmovdqu	PBlockEncKey(arg2), %xmm9
         vmovdqu	HashKey(arg2), %xmm13
@@ -777,9 +755,9 @@ _data_read_\@:				# Finished reading in data
         sub	$16, %r10
         # Determine if if partial block is not being filled and
         # shift mask accordingly
-        jge	_no_extra_mask_1_\@
+        jge	.L_no_extra_mask_1_\@
         sub	%r10, %r12
-_no_extra_mask_1_\@:
+.L_no_extra_mask_1_\@:
 
         vmovdqu	ALL_F-SHIFT_MASK(%r12), %xmm1
         # get the appropriate mask to mask out bottom r13 bytes of xmm9
@@ -792,17 +770,17 @@ _no_extra_mask_1_\@:
         vpxor	%xmm3, \AAD_HASH, \AAD_HASH
 
         test	%r10, %r10
-        jl	_partial_incomplete_1_\@
+        jl	.L_partial_incomplete_1_\@
 
         # GHASH computation for the last <16 Byte block
         \GHASH_MUL \AAD_HASH, %xmm13, %xmm0, %xmm10, %xmm11, %xmm5, %xmm6
         xor	%eax,%eax
 
         mov	%rax, PBlockLen(arg2)
-        jmp	_dec_done_\@
-_partial_incomplete_1_\@:
+        jmp	.L_dec_done_\@
+.L_partial_incomplete_1_\@:
         add	\PLAIN_CYPH_LEN, PBlockLen(arg2)
-_dec_done_\@:
+.L_dec_done_\@:
         vmovdqu	\AAD_HASH, AadHash(arg2)
 .else
         vpxor	%xmm1, %xmm9, %xmm9			# Plaintext XOR E(K, Yn)
@@ -813,9 +791,9 @@ _dec_done_\@:
         sub	$16, %r10
         # Determine if if partial block is not being filled and
         # shift mask accordingly
-        jge	_no_extra_mask_2_\@
+        jge	.L_no_extra_mask_2_\@
         sub	%r10, %r12
-_no_extra_mask_2_\@:
+.L_no_extra_mask_2_\@:
 
         vmovdqu	ALL_F-SHIFT_MASK(%r12), %xmm1
         # get the appropriate mask to mask out bottom r13 bytes of xmm9
@@ -827,17 +805,17 @@ _no_extra_mask_2_\@:
         vpxor	%xmm9, \AAD_HASH, \AAD_HASH
 
         test	%r10, %r10
-        jl	_partial_incomplete_2_\@
+        jl	.L_partial_incomplete_2_\@
 
         # GHASH computation for the last <16 Byte block
         \GHASH_MUL \AAD_HASH, %xmm13, %xmm0, %xmm10, %xmm11, %xmm5, %xmm6
         xor	%eax,%eax
 
         mov	%rax, PBlockLen(arg2)
-        jmp	_encode_done_\@
-_partial_incomplete_2_\@:
+        jmp	.L_encode_done_\@
+.L_partial_incomplete_2_\@:
         add	\PLAIN_CYPH_LEN, PBlockLen(arg2)
-_encode_done_\@:
+.L_encode_done_\@:
         vmovdqu	\AAD_HASH, AadHash(arg2)
 
         vmovdqa	SHUF_MASK(%rip), %xmm10
@@ -847,32 +825,32 @@ _encode_done_\@:
 .endif
         # output encrypted Bytes
         test	%r10, %r10
-        jl	_partial_fill_\@
+        jl	.L_partial_fill_\@
         mov	%r13, %r12
         mov	$16, %r13
         # Set r13 to be the number of bytes to write out
         sub	%r12, %r13
-        jmp	_count_set_\@
-_partial_fill_\@:
+        jmp	.L_count_set_\@
+.L_partial_fill_\@:
         mov	\PLAIN_CYPH_LEN, %r13
-_count_set_\@:
+.L_count_set_\@:
         vmovdqa	%xmm9, %xmm0
         vmovq	%xmm0, %rax
         cmp	$8, %r13
-        jle	_less_than_8_bytes_left_\@
+        jle	.L_less_than_8_bytes_left_\@
 
         mov	%rax, (\CYPH_PLAIN_OUT, \DATA_OFFSET, 1)
         add	$8, \DATA_OFFSET
         psrldq	$8, %xmm0
         vmovq	%xmm0, %rax
         sub	$8, %r13
-_less_than_8_bytes_left_\@:
+.L_less_than_8_bytes_left_\@:
         movb	%al, (\CYPH_PLAIN_OUT, \DATA_OFFSET, 1)
         add	$1, \DATA_OFFSET
         shr	$8, %rax
         sub	$1, %r13
-        jne	_less_than_8_bytes_left_\@
-_partial_block_done_\@:
+        jne	.L_less_than_8_bytes_left_\@
+.L_partial_block_done_\@:
 .endm # PARTIAL_BLOCK
 
 ###############################################################################
@@ -1073,7 +1051,7 @@ _partial_block_done_\@:
         vmovdqa  \XMM8, \T3
 
         cmp     $128, %r13
-        jl      _initial_blocks_done\@                  # no need for precomputed constants
+        jl      .L_initial_blocks_done\@                  # no need for precomputed constants
 
 ###############################################################################
 # Haskey_i_k holds XORed values of the low and high parts of the Haskey_i
@@ -1215,7 +1193,7 @@ _partial_block_done_\@:
 
 ###############################################################################
 
-_initial_blocks_done\@:
+.L_initial_blocks_done\@:
 
 .endm
 
@@ -2023,7 +2001,7 @@ SYM_FUNC_END(aesni_gcm_finalize_avx_gen2)
         vmovdqa  \XMM8, \T3
 
         cmp     $128, %r13
-        jl      _initial_blocks_done\@                  # no need for precomputed constants
+        jl      .L_initial_blocks_done\@                  # no need for precomputed constants
 
 ###############################################################################
 # Haskey_i_k holds XORed values of the low and high parts of the Haskey_i
@@ -2167,7 +2145,7 @@ SYM_FUNC_END(aesni_gcm_finalize_avx_gen2)
 
 ###############################################################################
 
-_initial_blocks_done\@:
+.L_initial_blocks_done\@:
 
 
 .endm
diff --git a/arch/x86/crypto/aria-aesni-avx-asm_64.S b/arch/x86/crypto/aria-aesni-avx-asm_64.S
index 9243f6289d34..7c1abc513f34 100644
--- a/arch/x86/crypto/aria-aesni-avx-asm_64.S
+++ b/arch/x86/crypto/aria-aesni-avx-asm_64.S
@@ -80,7 +80,7 @@
 	transpose_4x4(c0, c1, c2, c3, a0, a1);		\
 	transpose_4x4(d0, d1, d2, d3, a0, a1);		\
 							\
-	vmovdqu .Lshufb_16x16b, a0;			\
+	vmovdqu .Lshufb_16x16b(%rip), a0;		\
 	vmovdqu st1, a1;				\
 	vpshufb a0, a2, a2;				\
 	vpshufb a0, a3, a3;				\
@@ -132,7 +132,7 @@
 	transpose_4x4(c0, c1, c2, c3, a0, a1);		\
 	transpose_4x4(d0, d1, d2, d3, a0, a1);		\
 							\
-	vmovdqu .Lshufb_16x16b, a0;			\
+	vmovdqu .Lshufb_16x16b(%rip), a0;		\
 	vmovdqu st1, a1;				\
 	vpshufb a0, a2, a2;				\
 	vpshufb a0, a3, a3;				\
@@ -300,11 +300,11 @@
 			    x4, x5, x6, x7,		\
 			    t0, t1, t2, t3,		\
 			    t4, t5, t6, t7)		\
-	vmovdqa .Ltf_s2_bitmatrix, t0;			\
-	vmovdqa .Ltf_inv_bitmatrix, t1;			\
-	vmovdqa .Ltf_id_bitmatrix, t2;			\
-	vmovdqa .Ltf_aff_bitmatrix, t3;			\
-	vmovdqa .Ltf_x2_bitmatrix, t4;			\
+	vmovdqa .Ltf_s2_bitmatrix(%rip), t0;		\
+	vmovdqa .Ltf_inv_bitmatrix(%rip), t1;		\
+	vmovdqa .Ltf_id_bitmatrix(%rip), t2;		\
+	vmovdqa .Ltf_aff_bitmatrix(%rip), t3;		\
+	vmovdqa .Ltf_x2_bitmatrix(%rip), t4;		\
 	vgf2p8affineinvqb $(tf_s2_const), t0, x1, x1;	\
 	vgf2p8affineinvqb $(tf_s2_const), t0, x5, x5;	\
 	vgf2p8affineqb $(tf_inv_const), t1, x2, x2;	\
@@ -324,13 +324,13 @@
 		       x4, x5, x6, x7,			\
 		       t0, t1, t2, t3,			\
 		       t4, t5, t6, t7)			\
-	vmovdqa .Linv_shift_row, t0;			\
-	vmovdqa .Lshift_row, t1;			\
-	vbroadcastss .L0f0f0f0f, t6;			\
-	vmovdqa .Ltf_lo__inv_aff__and__s2, t2;		\
-	vmovdqa .Ltf_hi__inv_aff__and__s2, t3;		\
-	vmovdqa .Ltf_lo__x2__and__fwd_aff, t4;		\
-	vmovdqa .Ltf_hi__x2__and__fwd_aff, t5;		\
+	vmovdqa .Linv_shift_row(%rip), t0;		\
+	vmovdqa .Lshift_row(%rip), t1;			\
+	vbroadcastss .L0f0f0f0f(%rip), t6;		\
+	vmovdqa .Ltf_lo__inv_aff__and__s2(%rip), t2;	\
+	vmovdqa .Ltf_hi__inv_aff__and__s2(%rip), t3;	\
+	vmovdqa .Ltf_lo__x2__and__fwd_aff(%rip), t4;	\
+	vmovdqa .Ltf_hi__x2__and__fwd_aff(%rip), t5;	\
 							\
 	vaesenclast t7, x0, x0;				\
 	vaesenclast t7, x4, x4;				\
diff --git a/arch/x86/crypto/aria-aesni-avx2-asm_64.S b/arch/x86/crypto/aria-aesni-avx2-asm_64.S
index 82a14b4ad920..c60fa2980630 100644
--- a/arch/x86/crypto/aria-aesni-avx2-asm_64.S
+++ b/arch/x86/crypto/aria-aesni-avx2-asm_64.S
@@ -96,7 +96,7 @@
 	transpose_4x4(c0, c1, c2, c3, a0, a1);		\
 	transpose_4x4(d0, d1, d2, d3, a0, a1);		\
 							\
-	vbroadcasti128 .Lshufb_16x16b, a0;		\
+	vbroadcasti128 .Lshufb_16x16b(%rip), a0;	\
 	vmovdqu st1, a1;				\
 	vpshufb a0, a2, a2;				\
 	vpshufb a0, a3, a3;				\
@@ -148,7 +148,7 @@
 	transpose_4x4(c0, c1, c2, c3, a0, a1);		\
 	transpose_4x4(d0, d1, d2, d3, a0, a1);		\
 							\
-	vbroadcasti128 .Lshufb_16x16b, a0;		\
+	vbroadcasti128 .Lshufb_16x16b(%rip), a0;	\
 	vmovdqu st1, a1;				\
 	vpshufb a0, a2, a2;				\
 	vpshufb a0, a3, a3;				\
@@ -307,11 +307,11 @@
 			    x4, x5, x6, x7,		\
 			    t0, t1, t2, t3,		\
 			    t4, t5, t6, t7)		\
-	vpbroadcastq .Ltf_s2_bitmatrix, t0;		\
-	vpbroadcastq .Ltf_inv_bitmatrix, t1;		\
-	vpbroadcastq .Ltf_id_bitmatrix, t2;		\
-	vpbroadcastq .Ltf_aff_bitmatrix, t3;		\
-	vpbroadcastq .Ltf_x2_bitmatrix, t4;		\
+	vpbroadcastq .Ltf_s2_bitmatrix(%rip), t0;	\
+	vpbroadcastq .Ltf_inv_bitmatrix(%rip), t1;	\
+	vpbroadcastq .Ltf_id_bitmatrix(%rip), t2;	\
+	vpbroadcastq .Ltf_aff_bitmatrix(%rip), t3;	\
+	vpbroadcastq .Ltf_x2_bitmatrix(%rip), t4;	\
 	vgf2p8affineinvqb $(tf_s2_const), t0, x1, x1;	\
 	vgf2p8affineinvqb $(tf_s2_const), t0, x5, x5;	\
 	vgf2p8affineqb $(tf_inv_const), t1, x2, x2;	\
@@ -332,12 +332,12 @@
 		       t4, t5, t6, t7)			\
 	vpxor t7, t7, t7;				\
 	vpxor t6, t6, t6;				\
-	vbroadcasti128 .Linv_shift_row, t0;		\
-	vbroadcasti128 .Lshift_row, t1;			\
-	vbroadcasti128 .Ltf_lo__inv_aff__and__s2, t2;	\
-	vbroadcasti128 .Ltf_hi__inv_aff__and__s2, t3;	\
-	vbroadcasti128 .Ltf_lo__x2__and__fwd_aff, t4;	\
-	vbroadcasti128 .Ltf_hi__x2__and__fwd_aff, t5;	\
+	vbroadcasti128 .Linv_shift_row(%rip), t0;	\
+	vbroadcasti128 .Lshift_row(%rip), t1;		\
+	vbroadcasti128 .Ltf_lo__inv_aff__and__s2(%rip), t2; \
+	vbroadcasti128 .Ltf_hi__inv_aff__and__s2(%rip), t3; \
+	vbroadcasti128 .Ltf_lo__x2__and__fwd_aff(%rip), t4; \
+	vbroadcasti128 .Ltf_hi__x2__and__fwd_aff(%rip), t5; \
 							\
 	vextracti128 $1, x0, t6##_x;			\
 	vaesenclast t7##_x, x0##_x, x0##_x;		\
@@ -369,7 +369,7 @@
 	vaesdeclast t7##_x, t6##_x, t6##_x;		\
 	vinserti128 $1, t6##_x, x6, x6;			\
 							\
-	vpbroadcastd .L0f0f0f0f, t6;			\
+	vpbroadcastd .L0f0f0f0f(%rip), t6;		\
 							\
 	/* AES inverse shift rows */			\
 	vpshufb t0, x0, x0;				\
diff --git a/arch/x86/crypto/aria-gfni-avx512-asm_64.S b/arch/x86/crypto/aria-gfni-avx512-asm_64.S
index 3193f0701450..860887e5d02e 100644
--- a/arch/x86/crypto/aria-gfni-avx512-asm_64.S
+++ b/arch/x86/crypto/aria-gfni-avx512-asm_64.S
@@ -80,7 +80,7 @@
 	transpose_4x4(c0, c1, c2, c3, a0, a1);		\
 	transpose_4x4(d0, d1, d2, d3, a0, a1);		\
 							\
-	vbroadcasti64x2 .Lshufb_16x16b, a0;		\
+	vbroadcasti64x2 .Lshufb_16x16b(%rip), a0;	\
 	vmovdqu64 st1, a1;				\
 	vpshufb a0, a2, a2;				\
 	vpshufb a0, a3, a3;				\
@@ -132,7 +132,7 @@
 	transpose_4x4(c0, c1, c2, c3, a0, a1);		\
 	transpose_4x4(d0, d1, d2, d3, a0, a1);		\
 							\
-	vbroadcasti64x2 .Lshufb_16x16b, a0;		\
+	vbroadcasti64x2 .Lshufb_16x16b(%rip), a0;	\
 	vmovdqu64 st1, a1;				\
 	vpshufb a0, a2, a2;				\
 	vpshufb a0, a3, a3;				\
@@ -308,11 +308,11 @@
 			    x4, x5, x6, x7,		\
 			    t0, t1, t2, t3,		\
 			    t4, t5, t6, t7)		\
-	vpbroadcastq .Ltf_s2_bitmatrix, t0;		\
-	vpbroadcastq .Ltf_inv_bitmatrix, t1;		\
-	vpbroadcastq .Ltf_id_bitmatrix, t2;		\
-	vpbroadcastq .Ltf_aff_bitmatrix, t3;		\
-	vpbroadcastq .Ltf_x2_bitmatrix, t4;		\
+	vpbroadcastq .Ltf_s2_bitmatrix(%rip), t0;	\
+	vpbroadcastq .Ltf_inv_bitmatrix(%rip), t1;	\
+	vpbroadcastq .Ltf_id_bitmatrix(%rip), t2;	\
+	vpbroadcastq .Ltf_aff_bitmatrix(%rip), t3;	\
+	vpbroadcastq .Ltf_x2_bitmatrix(%rip), t4;	\
 	vgf2p8affineinvqb $(tf_s2_const), t0, x1, x1;	\
 	vgf2p8affineinvqb $(tf_s2_const), t0, x5, x5;	\
 	vgf2p8affineqb $(tf_inv_const), t1, x2, x2;	\
@@ -332,11 +332,11 @@
 			     y4, y5, y6, y7,		\
 			     t0, t1, t2, t3,		\
 			     t4, t5, t6, t7)		\
-	vpbroadcastq .Ltf_s2_bitmatrix, t0;		\
-	vpbroadcastq .Ltf_inv_bitmatrix, t1;		\
-	vpbroadcastq .Ltf_id_bitmatrix, t2;		\
-	vpbroadcastq .Ltf_aff_bitmatrix, t3;		\
-	vpbroadcastq .Ltf_x2_bitmatrix, t4;		\
+	vpbroadcastq .Ltf_s2_bitmatrix(%rip), t0;	\
+	vpbroadcastq .Ltf_inv_bitmatrix(%rip), t1;	\
+	vpbroadcastq .Ltf_id_bitmatrix(%rip), t2;	\
+	vpbroadcastq .Ltf_aff_bitmatrix(%rip), t3;	\
+	vpbroadcastq .Ltf_x2_bitmatrix(%rip), t4;	\
 	vgf2p8affineinvqb $(tf_s2_const), t0, x1, x1;	\
 	vgf2p8affineinvqb $(tf_s2_const), t0, x5, x5;	\
 	vgf2p8affineqb $(tf_inv_const), t1, x2, x2;	\
diff --git a/arch/x86/crypto/blake2s-glue.c b/arch/x86/crypto/blake2s-glue.c
index aaba21230528..0313f9673f56 100644
--- a/arch/x86/crypto/blake2s-glue.c
+++ b/arch/x86/crypto/blake2s-glue.c
@@ -8,7 +8,6 @@
 #include <linux/types.h>
 #include <linux/jump_label.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/sizes.h>
 
 #include <asm/cpufeature.h>
@@ -72,6 +71,4 @@ static int __init blake2s_mod_init(void)
 	return 0;
 }
 
-module_init(blake2s_mod_init);
-
-MODULE_LICENSE("GPL v2");
+subsys_initcall(blake2s_mod_init);
diff --git a/arch/x86/crypto/camellia-aesni-avx-asm_64.S b/arch/x86/crypto/camellia-aesni-avx-asm_64.S
index 4a30618281ec..646477a13e11 100644
--- a/arch/x86/crypto/camellia-aesni-avx-asm_64.S
+++ b/arch/x86/crypto/camellia-aesni-avx-asm_64.S
@@ -52,10 +52,10 @@
 	/* \
 	 * S-function with AES subbytes \
 	 */ \
-	vmovdqa .Linv_shift_row, t4; \
-	vbroadcastss .L0f0f0f0f, t7; \
-	vmovdqa .Lpre_tf_lo_s1, t0; \
-	vmovdqa .Lpre_tf_hi_s1, t1; \
+	vmovdqa .Linv_shift_row(%rip), t4; \
+	vbroadcastss .L0f0f0f0f(%rip), t7; \
+	vmovdqa .Lpre_tf_lo_s1(%rip), t0; \
+	vmovdqa .Lpre_tf_hi_s1(%rip), t1; \
 	\
 	/* AES inverse shift rows */ \
 	vpshufb t4, x0, x0; \
@@ -68,8 +68,8 @@
 	vpshufb t4, x6, x6; \
 	\
 	/* prefilter sboxes 1, 2 and 3 */ \
-	vmovdqa .Lpre_tf_lo_s4, t2; \
-	vmovdqa .Lpre_tf_hi_s4, t3; \
+	vmovdqa .Lpre_tf_lo_s4(%rip), t2; \
+	vmovdqa .Lpre_tf_hi_s4(%rip), t3; \
 	filter_8bit(x0, t0, t1, t7, t6); \
 	filter_8bit(x7, t0, t1, t7, t6); \
 	filter_8bit(x1, t0, t1, t7, t6); \
@@ -83,8 +83,8 @@
 	filter_8bit(x6, t2, t3, t7, t6); \
 	\
 	/* AES subbytes + AES shift rows */ \
-	vmovdqa .Lpost_tf_lo_s1, t0; \
-	vmovdqa .Lpost_tf_hi_s1, t1; \
+	vmovdqa .Lpost_tf_lo_s1(%rip), t0; \
+	vmovdqa .Lpost_tf_hi_s1(%rip), t1; \
 	vaesenclast t4, x0, x0; \
 	vaesenclast t4, x7, x7; \
 	vaesenclast t4, x1, x1; \
@@ -95,16 +95,16 @@
 	vaesenclast t4, x6, x6; \
 	\
 	/* postfilter sboxes 1 and 4 */ \
-	vmovdqa .Lpost_tf_lo_s3, t2; \
-	vmovdqa .Lpost_tf_hi_s3, t3; \
+	vmovdqa .Lpost_tf_lo_s3(%rip), t2; \
+	vmovdqa .Lpost_tf_hi_s3(%rip), t3; \
 	filter_8bit(x0, t0, t1, t7, t6); \
 	filter_8bit(x7, t0, t1, t7, t6); \
 	filter_8bit(x3, t0, t1, t7, t6); \
 	filter_8bit(x6, t0, t1, t7, t6); \
 	\
 	/* postfilter sbox 3 */ \
-	vmovdqa .Lpost_tf_lo_s2, t4; \
-	vmovdqa .Lpost_tf_hi_s2, t5; \
+	vmovdqa .Lpost_tf_lo_s2(%rip), t4; \
+	vmovdqa .Lpost_tf_hi_s2(%rip), t5; \
 	filter_8bit(x2, t2, t3, t7, t6); \
 	filter_8bit(x5, t2, t3, t7, t6); \
 	\
@@ -443,7 +443,7 @@ SYM_FUNC_END(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 	transpose_4x4(c0, c1, c2, c3, a0, a1); \
 	transpose_4x4(d0, d1, d2, d3, a0, a1); \
 	\
-	vmovdqu .Lshufb_16x16b, a0; \
+	vmovdqu .Lshufb_16x16b(%rip), a0; \
 	vmovdqu st1, a1; \
 	vpshufb a0, a2, a2; \
 	vpshufb a0, a3, a3; \
@@ -482,7 +482,7 @@ SYM_FUNC_END(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 #define inpack16_pre(x0, x1, x2, x3, x4, x5, x6, x7, y0, y1, y2, y3, y4, y5, \
 		     y6, y7, rio, key) \
 	vmovq key, x0; \
-	vpshufb .Lpack_bswap, x0, x0; \
+	vpshufb .Lpack_bswap(%rip), x0, x0; \
 	\
 	vpxor 0 * 16(rio), x0, y7; \
 	vpxor 1 * 16(rio), x0, y6; \
@@ -533,7 +533,7 @@ SYM_FUNC_END(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 	vmovdqu x0, stack_tmp0; \
 	\
 	vmovq key, x0; \
-	vpshufb .Lpack_bswap, x0, x0; \
+	vpshufb .Lpack_bswap(%rip), x0, x0; \
 	\
 	vpxor x0, y7, y7; \
 	vpxor x0, y6, y6; \
diff --git a/arch/x86/crypto/camellia-aesni-avx2-asm_64.S b/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
index deaf62aa73a6..a0eb94e53b1b 100644
--- a/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
+++ b/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
@@ -64,12 +64,12 @@
 	/* \
 	 * S-function with AES subbytes \
 	 */ \
-	vbroadcasti128 .Linv_shift_row, t4; \
-	vpbroadcastd .L0f0f0f0f, t7; \
-	vbroadcasti128 .Lpre_tf_lo_s1, t5; \
-	vbroadcasti128 .Lpre_tf_hi_s1, t6; \
-	vbroadcasti128 .Lpre_tf_lo_s4, t2; \
-	vbroadcasti128 .Lpre_tf_hi_s4, t3; \
+	vbroadcasti128 .Linv_shift_row(%rip), t4; \
+	vpbroadcastd .L0f0f0f0f(%rip), t7; \
+	vbroadcasti128 .Lpre_tf_lo_s1(%rip), t5; \
+	vbroadcasti128 .Lpre_tf_hi_s1(%rip), t6; \
+	vbroadcasti128 .Lpre_tf_lo_s4(%rip), t2; \
+	vbroadcasti128 .Lpre_tf_hi_s4(%rip), t3; \
 	\
 	/* AES inverse shift rows */ \
 	vpshufb t4, x0, x0; \
@@ -115,8 +115,8 @@
 	vinserti128 $1, t2##_x, x6, x6; \
 	vextracti128 $1, x1, t3##_x; \
 	vextracti128 $1, x4, t2##_x; \
-	vbroadcasti128 .Lpost_tf_lo_s1, t0; \
-	vbroadcasti128 .Lpost_tf_hi_s1, t1; \
+	vbroadcasti128 .Lpost_tf_lo_s1(%rip), t0; \
+	vbroadcasti128 .Lpost_tf_hi_s1(%rip), t1; \
 	vaesenclast t4##_x, x2##_x, x2##_x; \
 	vaesenclast t4##_x, t6##_x, t6##_x; \
 	vinserti128 $1, t6##_x, x2, x2; \
@@ -131,16 +131,16 @@
 	vinserti128 $1, t2##_x, x4, x4; \
 	\
 	/* postfilter sboxes 1 and 4 */ \
-	vbroadcasti128 .Lpost_tf_lo_s3, t2; \
-	vbroadcasti128 .Lpost_tf_hi_s3, t3; \
+	vbroadcasti128 .Lpost_tf_lo_s3(%rip), t2; \
+	vbroadcasti128 .Lpost_tf_hi_s3(%rip), t3; \
 	filter_8bit(x0, t0, t1, t7, t6); \
 	filter_8bit(x7, t0, t1, t7, t6); \
 	filter_8bit(x3, t0, t1, t7, t6); \
 	filter_8bit(x6, t0, t1, t7, t6); \
 	\
 	/* postfilter sbox 3 */ \
-	vbroadcasti128 .Lpost_tf_lo_s2, t4; \
-	vbroadcasti128 .Lpost_tf_hi_s2, t5; \
+	vbroadcasti128 .Lpost_tf_lo_s2(%rip), t4; \
+	vbroadcasti128 .Lpost_tf_hi_s2(%rip), t5; \
 	filter_8bit(x2, t2, t3, t7, t6); \
 	filter_8bit(x5, t2, t3, t7, t6); \
 	\
@@ -475,7 +475,7 @@ SYM_FUNC_END(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 	transpose_4x4(c0, c1, c2, c3, a0, a1); \
 	transpose_4x4(d0, d1, d2, d3, a0, a1); \
 	\
-	vbroadcasti128 .Lshufb_16x16b, a0; \
+	vbroadcasti128 .Lshufb_16x16b(%rip), a0; \
 	vmovdqu st1, a1; \
 	vpshufb a0, a2, a2; \
 	vpshufb a0, a3, a3; \
@@ -514,7 +514,7 @@ SYM_FUNC_END(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 #define inpack32_pre(x0, x1, x2, x3, x4, x5, x6, x7, y0, y1, y2, y3, y4, y5, \
 		     y6, y7, rio, key) \
 	vpbroadcastq key, x0; \
-	vpshufb .Lpack_bswap, x0, x0; \
+	vpshufb .Lpack_bswap(%rip), x0, x0; \
 	\
 	vpxor 0 * 32(rio), x0, y7; \
 	vpxor 1 * 32(rio), x0, y6; \
@@ -565,7 +565,7 @@ SYM_FUNC_END(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 	vmovdqu x0, stack_tmp0; \
 	\
 	vpbroadcastq key, x0; \
-	vpshufb .Lpack_bswap, x0, x0; \
+	vpshufb .Lpack_bswap(%rip), x0, x0; \
 	\
 	vpxor x0, y7, y7; \
 	vpxor x0, y6, y6; \
diff --git a/arch/x86/crypto/camellia-x86_64-asm_64.S b/arch/x86/crypto/camellia-x86_64-asm_64.S
index 347c059f5940..816b6bb8bded 100644
--- a/arch/x86/crypto/camellia-x86_64-asm_64.S
+++ b/arch/x86/crypto/camellia-x86_64-asm_64.S
@@ -77,11 +77,13 @@
 #define RXORbl %r9b
 
 #define xor2ror16(T0, T1, tmp1, tmp2, ab, dst) \
+	leaq T0(%rip), 			tmp1; \
 	movzbl ab ## bl,		tmp2 ## d; \
+	xorq (tmp1, tmp2, 8),		dst; \
+	leaq T1(%rip), 			tmp2; \
 	movzbl ab ## bh,		tmp1 ## d; \
 	rorq $16,			ab; \
-	xorq T0(, tmp2, 8),		dst; \
-	xorq T1(, tmp1, 8),		dst;
+	xorq (tmp2, tmp1, 8),		dst;
 
 /**********************************************************************
   1-way camellia
diff --git a/arch/x86/crypto/cast5-avx-x86_64-asm_64.S b/arch/x86/crypto/cast5-avx-x86_64-asm_64.S
index 0326a01503c3..b4e460a87f18 100644
--- a/arch/x86/crypto/cast5-avx-x86_64-asm_64.S
+++ b/arch/x86/crypto/cast5-avx-x86_64-asm_64.S
@@ -84,15 +84,19 @@
 
 #define lookup_32bit(src, dst, op1, op2, op3, interleave_op, il_reg) \
 	movzbl		src ## bh,     RID1d;    \
+	leaq		s1(%rip),      RID2;     \
+	movl		(RID2,RID1,4), dst ## d; \
 	movzbl		src ## bl,     RID2d;    \
+	leaq		s2(%rip),      RID1;     \
+	op1		(RID1,RID2,4), dst ## d; \
 	shrq $16,	src;                     \
-	movl		s1(, RID1, 4), dst ## d; \
-	op1		s2(, RID2, 4), dst ## d; \
 	movzbl		src ## bh,     RID1d;    \
+	leaq		s3(%rip),      RID2;     \
+	op2		(RID2,RID1,4), dst ## d; \
 	movzbl		src ## bl,     RID2d;    \
 	interleave_op(il_reg);			 \
-	op2		s3(, RID1, 4), dst ## d; \
-	op3		s4(, RID2, 4), dst ## d;
+	leaq		s4(%rip),      RID1;     \
+	op3		(RID1,RID2,4), dst ## d;
 
 #define dummy(d) /* do nothing */
 
@@ -151,15 +155,15 @@
 	subround(l ## 3, r ## 3, l ## 4, r ## 4, f);
 
 #define enc_preload_rkr() \
-	vbroadcastss	.L16_mask,                RKR;      \
+	vbroadcastss	.L16_mask(%rip),          RKR;      \
 	/* add 16-bit rotation to key rotations (mod 32) */ \
 	vpxor		kr(CTX),                  RKR, RKR;
 
 #define dec_preload_rkr() \
-	vbroadcastss	.L16_mask,                RKR;      \
+	vbroadcastss	.L16_mask(%rip),          RKR;      \
 	/* add 16-bit rotation to key rotations (mod 32) */ \
 	vpxor		kr(CTX),                  RKR, RKR; \
-	vpshufb		.Lbswap128_mask,          RKR, RKR;
+	vpshufb		.Lbswap128_mask(%rip),    RKR, RKR;
 
 #define transpose_2x4(x0, x1, t0, t1) \
 	vpunpckldq		x1, x0, t0; \
@@ -235,9 +239,9 @@ SYM_FUNC_START_LOCAL(__cast5_enc_blk16)
 
 	movq %rdi, CTX;
 
-	vmovdqa .Lbswap_mask, RKM;
-	vmovd .Lfirst_mask, R1ST;
-	vmovd .L32_mask, R32;
+	vmovdqa .Lbswap_mask(%rip), RKM;
+	vmovd .Lfirst_mask(%rip), R1ST;
+	vmovd .L32_mask(%rip), R32;
 	enc_preload_rkr();
 
 	inpack_blocks(RL1, RR1, RTMP, RX, RKM);
@@ -271,7 +275,7 @@ SYM_FUNC_START_LOCAL(__cast5_enc_blk16)
 	popq %rbx;
 	popq %r15;
 
-	vmovdqa .Lbswap_mask, RKM;
+	vmovdqa .Lbswap_mask(%rip), RKM;
 
 	outunpack_blocks(RR1, RL1, RTMP, RX, RKM);
 	outunpack_blocks(RR2, RL2, RTMP, RX, RKM);
@@ -308,9 +312,9 @@ SYM_FUNC_START_LOCAL(__cast5_dec_blk16)
 
 	movq %rdi, CTX;
 
-	vmovdqa .Lbswap_mask, RKM;
-	vmovd .Lfirst_mask, R1ST;
-	vmovd .L32_mask, R32;
+	vmovdqa .Lbswap_mask(%rip), RKM;
+	vmovd .Lfirst_mask(%rip), R1ST;
+	vmovd .L32_mask(%rip), R32;
 	dec_preload_rkr();
 
 	inpack_blocks(RL1, RR1, RTMP, RX, RKM);
@@ -341,7 +345,7 @@ SYM_FUNC_START_LOCAL(__cast5_dec_blk16)
 	round(RL, RR, 1, 2);
 	round(RR, RL, 0, 1);
 
-	vmovdqa .Lbswap_mask, RKM;
+	vmovdqa .Lbswap_mask(%rip), RKM;
 	popq %rbx;
 	popq %r15;
 
@@ -504,8 +508,8 @@ SYM_FUNC_START(cast5_ctr_16way)
 
 	vpcmpeqd RKR, RKR, RKR;
 	vpaddq RKR, RKR, RKR; /* low: -2, high: -2 */
-	vmovdqa .Lbswap_iv_mask, R1ST;
-	vmovdqa .Lbswap128_mask, RKM;
+	vmovdqa .Lbswap_iv_mask(%rip), R1ST;
+	vmovdqa .Lbswap128_mask(%rip), RKM;
 
 	/* load IV and byteswap */
 	vmovq (%rcx), RX;
diff --git a/arch/x86/crypto/cast6-avx-x86_64-asm_64.S b/arch/x86/crypto/cast6-avx-x86_64-asm_64.S
index 82b716fd5dba..9e86d460b409 100644
--- a/arch/x86/crypto/cast6-avx-x86_64-asm_64.S
+++ b/arch/x86/crypto/cast6-avx-x86_64-asm_64.S
@@ -84,15 +84,19 @@
 
 #define lookup_32bit(src, dst, op1, op2, op3, interleave_op, il_reg) \
 	movzbl		src ## bh,     RID1d;    \
+	leaq		s1(%rip),      RID2;     \
+	movl		(RID2,RID1,4), dst ## d; \
 	movzbl		src ## bl,     RID2d;    \
+	leaq		s2(%rip),      RID1;     \
+	op1		(RID1,RID2,4), dst ## d; \
 	shrq $16,	src;                     \
-	movl		s1(, RID1, 4), dst ## d; \
-	op1		s2(, RID2, 4), dst ## d; \
 	movzbl		src ## bh,     RID1d;    \
+	leaq		s3(%rip),      RID2;     \
+	op2		(RID2,RID1,4), dst ## d; \
 	movzbl		src ## bl,     RID2d;    \
 	interleave_op(il_reg);			 \
-	op2		s3(, RID1, 4), dst ## d; \
-	op3		s4(, RID2, 4), dst ## d;
+	leaq		s4(%rip),      RID1;     \
+	op3		(RID1,RID2,4), dst ## d;
 
 #define dummy(d) /* do nothing */
 
@@ -175,10 +179,10 @@
 	qop(RD, RC, 1);
 
 #define shuffle(mask) \
-	vpshufb		mask,            RKR, RKR;
+	vpshufb		mask(%rip),            RKR, RKR;
 
 #define preload_rkr(n, do_mask, mask) \
-	vbroadcastss	.L16_mask,                RKR;      \
+	vbroadcastss	.L16_mask(%rip),          RKR;      \
 	/* add 16-bit rotation to key rotations (mod 32) */ \
 	vpxor		(kr+n*16)(CTX),           RKR, RKR; \
 	do_mask(mask);
@@ -258,9 +262,9 @@ SYM_FUNC_START_LOCAL(__cast6_enc_blk8)
 
 	movq %rdi, CTX;
 
-	vmovdqa .Lbswap_mask, RKM;
-	vmovd .Lfirst_mask, R1ST;
-	vmovd .L32_mask, R32;
+	vmovdqa .Lbswap_mask(%rip), RKM;
+	vmovd .Lfirst_mask(%rip), R1ST;
+	vmovd .L32_mask(%rip), R32;
 
 	inpack_blocks(RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM);
 	inpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
@@ -284,7 +288,7 @@ SYM_FUNC_START_LOCAL(__cast6_enc_blk8)
 	popq %rbx;
 	popq %r15;
 
-	vmovdqa .Lbswap_mask, RKM;
+	vmovdqa .Lbswap_mask(%rip), RKM;
 
 	outunpack_blocks(RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM);
 	outunpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
@@ -306,9 +310,9 @@ SYM_FUNC_START_LOCAL(__cast6_dec_blk8)
 
 	movq %rdi, CTX;
 
-	vmovdqa .Lbswap_mask, RKM;
-	vmovd .Lfirst_mask, R1ST;
-	vmovd .L32_mask, R32;
+	vmovdqa .Lbswap_mask(%rip), RKM;
+	vmovd .Lfirst_mask(%rip), R1ST;
+	vmovd .L32_mask(%rip), R32;
 
 	inpack_blocks(RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM);
 	inpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
@@ -332,7 +336,7 @@ SYM_FUNC_START_LOCAL(__cast6_dec_blk8)
 	popq %rbx;
 	popq %r15;
 
-	vmovdqa .Lbswap_mask, RKM;
+	vmovdqa .Lbswap_mask(%rip), RKM;
 	outunpack_blocks(RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM);
 	outunpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
 
diff --git a/arch/x86/crypto/crc32-pclmul_asm.S b/arch/x86/crypto/crc32-pclmul_asm.S
index ca53e96996ac..5d31137e2c7d 100644
--- a/arch/x86/crypto/crc32-pclmul_asm.S
+++ b/arch/x86/crypto/crc32-pclmul_asm.S
@@ -90,7 +90,7 @@ SYM_FUNC_START(crc32_pclmul_le_16) /* buffer and buffer size are 16 bytes aligne
 	sub     $0x40, LEN
 	add     $0x40, BUF
 	cmp     $0x40, LEN
-	jb      less_64
+	jb      .Lless_64
 
 #ifdef __x86_64__
 	movdqa .Lconstant_R2R1(%rip), CONSTANT
@@ -98,7 +98,7 @@ SYM_FUNC_START(crc32_pclmul_le_16) /* buffer and buffer size are 16 bytes aligne
 	movdqa .Lconstant_R2R1, CONSTANT
 #endif
 
-loop_64:/*  64 bytes Full cache line folding */
+.Lloop_64:/*  64 bytes Full cache line folding */
 	prefetchnta    0x40(BUF)
 	movdqa  %xmm1, %xmm5
 	movdqa  %xmm2, %xmm6
@@ -139,8 +139,8 @@ loop_64:/*  64 bytes Full cache line folding */
 	sub     $0x40, LEN
 	add     $0x40, BUF
 	cmp     $0x40, LEN
-	jge     loop_64
-less_64:/*  Folding cache line into 128bit */
+	jge     .Lloop_64
+.Lless_64:/*  Folding cache line into 128bit */
 #ifdef __x86_64__
 	movdqa  .Lconstant_R4R3(%rip), CONSTANT
 #else
@@ -167,8 +167,8 @@ less_64:/*  Folding cache line into 128bit */
 	pxor    %xmm4, %xmm1
 
 	cmp     $0x10, LEN
-	jb      fold_64
-loop_16:/* Folding rest buffer into 128bit */
+	jb      .Lfold_64
+.Lloop_16:/* Folding rest buffer into 128bit */
 	movdqa  %xmm1, %xmm5
 	pclmulqdq $0x00, CONSTANT, %xmm1
 	pclmulqdq $0x11, CONSTANT, %xmm5
@@ -177,9 +177,9 @@ loop_16:/* Folding rest buffer into 128bit */
 	sub     $0x10, LEN
 	add     $0x10, BUF
 	cmp     $0x10, LEN
-	jge     loop_16
+	jge     .Lloop_16
 
-fold_64:
+.Lfold_64:
 	/* perform the last 64 bit fold, also adds 32 zeroes
 	 * to the input stream */
 	pclmulqdq $0x01, %xmm1, CONSTANT /* R4 * xmm1.low */
diff --git a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
index ec35915f0901..81ce0f4db555 100644
--- a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
+++ b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
@@ -49,15 +49,15 @@
 ## ISCSI CRC 32 Implementation with crc32 and pclmulqdq Instruction
 
 .macro LABEL prefix n
-\prefix\n\():
+.L\prefix\n\():
 .endm
 
 .macro JMPTBL_ENTRY i
-.quad crc_\i
+.quad .Lcrc_\i
 .endm
 
 .macro JNC_LESS_THAN j
-	jnc less_than_\j
+	jnc .Lless_than_\j
 .endm
 
 # Define threshold where buffers are considered "small" and routed to more
@@ -108,30 +108,30 @@ SYM_FUNC_START(crc_pcl)
 	neg     %bufp
 	and     $7, %bufp		# calculate the unalignment amount of
 					# the address
-	je      proc_block		# Skip if aligned
+	je      .Lproc_block		# Skip if aligned
 
 	## If len is less than 8 and we're unaligned, we need to jump
 	## to special code to avoid reading beyond the end of the buffer
 	cmp     $8, len
-	jae     do_align
+	jae     .Ldo_align
 	# less_than_8 expects length in upper 3 bits of len_dw
 	# less_than_8_post_shl1 expects length = carryflag * 8 + len_dw[31:30]
 	shl     $32-3+1, len_dw
-	jmp     less_than_8_post_shl1
+	jmp     .Lless_than_8_post_shl1
 
-do_align:
+.Ldo_align:
 	#### Calculate CRC of unaligned bytes of the buffer (if any)
 	movq    (bufptmp), tmp		# load a quadward from the buffer
 	add     %bufp, bufptmp		# align buffer pointer for quadword
 					# processing
 	sub     %bufp, len		# update buffer length
-align_loop:
+.Lalign_loop:
 	crc32b  %bl, crc_init_dw 	# compute crc32 of 1-byte
 	shr     $8, tmp			# get next byte
 	dec     %bufp
-	jne     align_loop
+	jne     .Lalign_loop
 
-proc_block:
+.Lproc_block:
 
 	################################################################
 	## 2) PROCESS  BLOCKS:
@@ -141,11 +141,11 @@ proc_block:
 	movq    len, tmp		# save num bytes in tmp
 
 	cmpq    $128*24, len
-	jae     full_block
+	jae     .Lfull_block
 
-continue_block:
+.Lcontinue_block:
 	cmpq    $SMALL_SIZE, len
-	jb      small
+	jb      .Lsmall
 
 	## len < 128*24
 	movq    $2731, %rax		# 2731 = ceil(2^16 / 24)
@@ -168,13 +168,14 @@ continue_block:
 	xor     crc2, crc2
 
 	## branch into array
-	mov	jump_table(,%rax,8), %bufp
+	leaq	jump_table(%rip), %bufp
+	mov	(%bufp,%rax,8), %bufp
 	JMP_NOSPEC bufp
 
 	################################################################
 	## 2a) PROCESS FULL BLOCKS:
 	################################################################
-full_block:
+.Lfull_block:
 	movl    $128,%eax
 	lea     128*8*2(block_0), block_1
 	lea     128*8*3(block_0), block_2
@@ -189,7 +190,6 @@ full_block:
 	## 3) CRC Array:
 	################################################################
 
-crc_array:
 	i=128
 .rept 128-1
 .altmacro
@@ -242,28 +242,28 @@ LABEL crc_ 0
 	ENDBR
 	mov     tmp, len
 	cmp     $128*24, tmp
-	jae     full_block
+	jae     .Lfull_block
 	cmp     $24, tmp
-	jae     continue_block
+	jae     .Lcontinue_block
 
-less_than_24:
+.Lless_than_24:
 	shl     $32-4, len_dw			# less_than_16 expects length
 						# in upper 4 bits of len_dw
-	jnc     less_than_16
+	jnc     .Lless_than_16
 	crc32q  (bufptmp), crc_init
 	crc32q  8(bufptmp), crc_init
-	jz      do_return
+	jz      .Ldo_return
 	add     $16, bufptmp
 	# len is less than 8 if we got here
 	# less_than_8 expects length in upper 3 bits of len_dw
 	# less_than_8_post_shl1 expects length = carryflag * 8 + len_dw[31:30]
 	shl     $2, len_dw
-	jmp     less_than_8_post_shl1
+	jmp     .Lless_than_8_post_shl1
 
 	#######################################################################
 	## 6) LESS THAN 256-bytes REMAIN AT THIS POINT (8-bits of len are full)
 	#######################################################################
-small:
+.Lsmall:
 	shl $32-8, len_dw		# Prepare len_dw for less_than_256
 	j=256
 .rept 5					# j = {256, 128, 64, 32, 16}
@@ -279,32 +279,32 @@ LABEL less_than_ %j			# less_than_j: Length should be in
 	crc32q  i(bufptmp), crc_init	# Compute crc32 of 8-byte data
 	i=i+8
 .endr
-	jz      do_return		# Return if remaining length is zero
+	jz      .Ldo_return		# Return if remaining length is zero
 	add     $j, bufptmp		# Advance buf
 .endr
 
-less_than_8:				# Length should be stored in
+.Lless_than_8:				# Length should be stored in
 					# upper 3 bits of len_dw
 	shl     $1, len_dw
-less_than_8_post_shl1:
-	jnc     less_than_4
+.Lless_than_8_post_shl1:
+	jnc     .Lless_than_4
 	crc32l  (bufptmp), crc_init_dw	# CRC of 4 bytes
-	jz      do_return		# return if remaining data is zero
+	jz      .Ldo_return		# return if remaining data is zero
 	add     $4, bufptmp
-less_than_4:				# Length should be stored in
+.Lless_than_4:				# Length should be stored in
 					# upper 2 bits of len_dw
 	shl     $1, len_dw
-	jnc     less_than_2
+	jnc     .Lless_than_2
 	crc32w  (bufptmp), crc_init_dw	# CRC of 2 bytes
-	jz      do_return		# return if remaining data is zero
+	jz      .Ldo_return		# return if remaining data is zero
 	add     $2, bufptmp
-less_than_2:				# Length should be stored in the MSB
+.Lless_than_2:				# Length should be stored in the MSB
 					# of len_dw
 	shl     $1, len_dw
-	jnc     less_than_1
+	jnc     .Lless_than_1
 	crc32b  (bufptmp), crc_init_dw	# CRC of 1 byte
-less_than_1:				# Length should be zero
-do_return:
+.Lless_than_1:				# Length should be zero
+.Ldo_return:
 	movq    crc_init, %rax
 	popq    %rsi
 	popq    %rdi
diff --git a/arch/x86/crypto/des3_ede-asm_64.S b/arch/x86/crypto/des3_ede-asm_64.S
index f4c760f4cade..cf21b998e77c 100644
--- a/arch/x86/crypto/des3_ede-asm_64.S
+++ b/arch/x86/crypto/des3_ede-asm_64.S
@@ -129,21 +129,29 @@
 	movzbl RW0bl, RT2d; \
 	movzbl RW0bh, RT3d; \
 	shrq $16, RW0; \
-	movq s8(, RT0, 8), RT0; \
-	xorq s6(, RT1, 8), to; \
+	leaq s8(%rip), RW1; \
+	movq (RW1, RT0, 8), RT0; \
+	leaq s6(%rip), RW1; \
+	xorq (RW1, RT1, 8), to; \
 	movzbl RW0bl, RL1d; \
 	movzbl RW0bh, RT1d; \
 	shrl $16, RW0d; \
-	xorq s4(, RT2, 8), RT0; \
-	xorq s2(, RT3, 8), to; \
+	leaq s4(%rip), RW1; \
+	xorq (RW1, RT2, 8), RT0; \
+	leaq s2(%rip), RW1; \
+	xorq (RW1, RT3, 8), to; \
 	movzbl RW0bl, RT2d; \
 	movzbl RW0bh, RT3d; \
-	xorq s7(, RL1, 8), RT0; \
-	xorq s5(, RT1, 8), to; \
-	xorq s3(, RT2, 8), RT0; \
+	leaq s7(%rip), RW1; \
+	xorq (RW1, RL1, 8), RT0; \
+	leaq s5(%rip), RW1; \
+	xorq (RW1, RT1, 8), to; \
+	leaq s3(%rip), RW1; \
+	xorq (RW1, RT2, 8), RT0; \
 	load_next_key(n, RW0); \
 	xorq RT0, to; \
-	xorq s1(, RT3, 8), to; \
+	leaq s1(%rip), RW1; \
+	xorq (RW1, RT3, 8), to; \
 
 #define load_next_key(n, RWx) \
 	movq (((n) + 1) * 8)(CTX), RWx;
@@ -355,65 +363,89 @@ SYM_FUNC_END(des3_ede_x86_64_crypt_blk)
 	movzbl RW0bl, RT3d; \
 	movzbl RW0bh, RT1d; \
 	shrq $16, RW0; \
-	xorq s8(, RT3, 8), to##0; \
-	xorq s6(, RT1, 8), to##0; \
+	leaq s8(%rip), RT2; \
+	xorq (RT2, RT3, 8), to##0; \
+	leaq s6(%rip), RT2; \
+	xorq (RT2, RT1, 8), to##0; \
 	movzbl RW0bl, RT3d; \
 	movzbl RW0bh, RT1d; \
 	shrq $16, RW0; \
-	xorq s4(, RT3, 8), to##0; \
-	xorq s2(, RT1, 8), to##0; \
+	leaq s4(%rip), RT2; \
+	xorq (RT2, RT3, 8), to##0; \
+	leaq s2(%rip), RT2; \
+	xorq (RT2, RT1, 8), to##0; \
 	movzbl RW0bl, RT3d; \
 	movzbl RW0bh, RT1d; \
 	shrl $16, RW0d; \
-	xorq s7(, RT3, 8), to##0; \
-	xorq s5(, RT1, 8), to##0; \
+	leaq s7(%rip), RT2; \
+	xorq (RT2, RT3, 8), to##0; \
+	leaq s5(%rip), RT2; \
+	xorq (RT2, RT1, 8), to##0; \
 	movzbl RW0bl, RT3d; \
 	movzbl RW0bh, RT1d; \
 	load_next_key(n, RW0); \
-	xorq s3(, RT3, 8), to##0; \
-	xorq s1(, RT1, 8), to##0; \
+	leaq s3(%rip), RT2; \
+	xorq (RT2, RT3, 8), to##0; \
+	leaq s1(%rip), RT2; \
+	xorq (RT2, RT1, 8), to##0; \
 		xorq from##1, RW1; \
 		movzbl RW1bl, RT3d; \
 		movzbl RW1bh, RT1d; \
 		shrq $16, RW1; \
-		xorq s8(, RT3, 8), to##1; \
-		xorq s6(, RT1, 8), to##1; \
+		leaq s8(%rip), RT2; \
+		xorq (RT2, RT3, 8), to##1; \
+		leaq s6(%rip), RT2; \
+		xorq (RT2, RT1, 8), to##1; \
 		movzbl RW1bl, RT3d; \
 		movzbl RW1bh, RT1d; \
 		shrq $16, RW1; \
-		xorq s4(, RT3, 8), to##1; \
-		xorq s2(, RT1, 8), to##1; \
+		leaq s4(%rip), RT2; \
+		xorq (RT2, RT3, 8), to##1; \
+		leaq s2(%rip), RT2; \
+		xorq (RT2, RT1, 8), to##1; \
 		movzbl RW1bl, RT3d; \
 		movzbl RW1bh, RT1d; \
 		shrl $16, RW1d; \
-		xorq s7(, RT3, 8), to##1; \
-		xorq s5(, RT1, 8), to##1; \
+		leaq s7(%rip), RT2; \
+		xorq (RT2, RT3, 8), to##1; \
+		leaq s5(%rip), RT2; \
+		xorq (RT2, RT1, 8), to##1; \
 		movzbl RW1bl, RT3d; \
 		movzbl RW1bh, RT1d; \
 		do_movq(RW0, RW1); \
-		xorq s3(, RT3, 8), to##1; \
-		xorq s1(, RT1, 8), to##1; \
+		leaq s3(%rip), RT2; \
+		xorq (RT2, RT3, 8), to##1; \
+		leaq s1(%rip), RT2; \
+		xorq (RT2, RT1, 8), to##1; \
 			xorq from##2, RW2; \
 			movzbl RW2bl, RT3d; \
 			movzbl RW2bh, RT1d; \
 			shrq $16, RW2; \
-			xorq s8(, RT3, 8), to##2; \
-			xorq s6(, RT1, 8), to##2; \
+			leaq s8(%rip), RT2; \
+			xorq (RT2, RT3, 8), to##2; \
+			leaq s6(%rip), RT2; \
+			xorq (RT2, RT1, 8), to##2; \
 			movzbl RW2bl, RT3d; \
 			movzbl RW2bh, RT1d; \
 			shrq $16, RW2; \
-			xorq s4(, RT3, 8), to##2; \
-			xorq s2(, RT1, 8), to##2; \
+			leaq s4(%rip), RT2; \
+			xorq (RT2, RT3, 8), to##2; \
+			leaq s2(%rip), RT2; \
+			xorq (RT2, RT1, 8), to##2; \
 			movzbl RW2bl, RT3d; \
 			movzbl RW2bh, RT1d; \
 			shrl $16, RW2d; \
-			xorq s7(, RT3, 8), to##2; \
-			xorq s5(, RT1, 8), to##2; \
+			leaq s7(%rip), RT2; \
+			xorq (RT2, RT3, 8), to##2; \
+			leaq s5(%rip), RT2; \
+			xorq (RT2, RT1, 8), to##2; \
 			movzbl RW2bl, RT3d; \
 			movzbl RW2bh, RT1d; \
 			do_movq(RW0, RW2); \
-			xorq s3(, RT3, 8), to##2; \
-			xorq s1(, RT1, 8), to##2;
+			leaq s3(%rip), RT2; \
+			xorq (RT2, RT3, 8), to##2; \
+			leaq s1(%rip), RT2; \
+			xorq (RT2, RT1, 8), to##2;
 
 #define __movq(src, dst) \
 	movq src, dst;
diff --git a/arch/x86/crypto/ghash-clmulni-intel_asm.S b/arch/x86/crypto/ghash-clmulni-intel_asm.S
index 257ed9446f3e..99cb983ded9e 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_asm.S
+++ b/arch/x86/crypto/ghash-clmulni-intel_asm.S
@@ -93,7 +93,7 @@ SYM_FUNC_START(clmul_ghash_mul)
 	FRAME_BEGIN
 	movups (%rdi), DATA
 	movups (%rsi), SHASH
-	movaps .Lbswap_mask, BSWAP
+	movaps .Lbswap_mask(%rip), BSWAP
 	pshufb BSWAP, DATA
 	call __clmul_gf128mul_ble
 	pshufb BSWAP, DATA
@@ -110,7 +110,7 @@ SYM_FUNC_START(clmul_ghash_update)
 	FRAME_BEGIN
 	cmp $16, %rdx
 	jb .Lupdate_just_ret	# check length
-	movaps .Lbswap_mask, BSWAP
+	movaps .Lbswap_mask(%rip), BSWAP
 	movups (%rdi), DATA
 	movups (%rcx), SHASH
 	pshufb BSWAP, DATA
diff --git a/arch/x86/crypto/sha1_avx2_x86_64_asm.S b/arch/x86/crypto/sha1_avx2_x86_64_asm.S
index a96b2fd26dab..4b49bdc95265 100644
--- a/arch/x86/crypto/sha1_avx2_x86_64_asm.S
+++ b/arch/x86/crypto/sha1_avx2_x86_64_asm.S
@@ -485,18 +485,18 @@
 	xchg	WK_BUF, PRECALC_BUF
 
 	.align 32
-_loop:
+.L_loop:
 	/*
 	 * code loops through more than one block
 	 * we use K_BASE value as a signal of a last block,
 	 * it is set below by: cmovae BUFFER_PTR, K_BASE
 	 */
 	test BLOCKS_CTR, BLOCKS_CTR
-	jnz _begin
+	jnz .L_begin
 	.align 32
-	jmp	_end
+	jmp	.L_end
 	.align 32
-_begin:
+.L_begin:
 
 	/*
 	 * Do first block
@@ -508,9 +508,6 @@ _begin:
 		.set j, j+2
 	.endr
 
-	jmp _loop0
-_loop0:
-
 	/*
 	 * rounds:
 	 * 10,12,14,16,18
@@ -545,7 +542,7 @@ _loop0:
 	UPDATE_HASH	16(HASH_PTR), E
 
 	test	BLOCKS_CTR, BLOCKS_CTR
-	jz	_loop
+	jz	.L_loop
 
 	mov	TB, B
 
@@ -562,8 +559,6 @@ _loop0:
 		.set j, j+2
 	.endr
 
-	jmp	_loop1
-_loop1:
 	/*
 	 * rounds
 	 * 20+80,22+80,24+80,26+80,28+80
@@ -574,9 +569,6 @@ _loop1:
 		.set j, j+2
 	.endr
 
-	jmp	_loop2
-_loop2:
-
 	/*
 	 * rounds
 	 * 40+80,42+80,44+80,46+80,48+80
@@ -592,9 +584,6 @@ _loop2:
 	/* Move to the next block only if needed*/
 	ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 4, 128
 
-	jmp	_loop3
-_loop3:
-
 	/*
 	 * rounds
 	 * 60+80,62+80,64+80,66+80,68+80
@@ -623,10 +612,10 @@ _loop3:
 
 	xchg	WK_BUF, PRECALC_BUF
 
-	jmp	_loop
+	jmp	.L_loop
 
 	.align 32
-	_end:
+.L_end:
 
 .endm
 /*
diff --git a/arch/x86/crypto/sha256-avx-asm.S b/arch/x86/crypto/sha256-avx-asm.S
index 5555b5d5215a..53de72bdd851 100644
--- a/arch/x86/crypto/sha256-avx-asm.S
+++ b/arch/x86/crypto/sha256-avx-asm.S
@@ -360,7 +360,7 @@ SYM_TYPED_FUNC_START(sha256_transform_avx)
 	and	$~15, %rsp		# align stack pointer
 
 	shl     $6, NUM_BLKS		# convert to bytes
-	jz      done_hash
+	jz      .Ldone_hash
 	add     INP, NUM_BLKS		# pointer to end of data
 	mov     NUM_BLKS, _INP_END(%rsp)
 
@@ -377,7 +377,7 @@ SYM_TYPED_FUNC_START(sha256_transform_avx)
 	vmovdqa  PSHUFFLE_BYTE_FLIP_MASK(%rip), BYTE_FLIP_MASK
 	vmovdqa  _SHUF_00BA(%rip), SHUF_00BA
 	vmovdqa  _SHUF_DC00(%rip), SHUF_DC00
-loop0:
+.Lloop0:
 	lea     K256(%rip), TBL
 
 	## byte swap first 16 dwords
@@ -391,7 +391,7 @@ loop0:
 	## schedule 48 input dwords, by doing 3 rounds of 16 each
 	mov     $3, SRND
 .align 16
-loop1:
+.Lloop1:
 	vpaddd  (TBL), X0, XFER
 	vmovdqa XFER, _XFER(%rsp)
 	FOUR_ROUNDS_AND_SCHED
@@ -410,10 +410,10 @@ loop1:
 	FOUR_ROUNDS_AND_SCHED
 
 	sub     $1, SRND
-	jne     loop1
+	jne     .Lloop1
 
 	mov     $2, SRND
-loop2:
+.Lloop2:
 	vpaddd  (TBL), X0, XFER
 	vmovdqa XFER, _XFER(%rsp)
 	DO_ROUND        0
@@ -433,7 +433,7 @@ loop2:
 	vmovdqa X3, X1
 
 	sub     $1, SRND
-	jne     loop2
+	jne     .Lloop2
 
 	addm    (4*0)(CTX),a
 	addm    (4*1)(CTX),b
@@ -447,9 +447,9 @@ loop2:
 	mov     _INP(%rsp), INP
 	add     $64, INP
 	cmp     _INP_END(%rsp), INP
-	jne     loop0
+	jne     .Lloop0
 
-done_hash:
+.Ldone_hash:
 
 	mov	%rbp, %rsp
 	popq	%rbp
diff --git a/arch/x86/crypto/sha256-avx2-asm.S b/arch/x86/crypto/sha256-avx2-asm.S
index 3eada9416852..9918212faf91 100644
--- a/arch/x86/crypto/sha256-avx2-asm.S
+++ b/arch/x86/crypto/sha256-avx2-asm.S
@@ -538,12 +538,12 @@ SYM_TYPED_FUNC_START(sha256_transform_rorx)
 	and	$-32, %rsp	# align rsp to 32 byte boundary
 
 	shl	$6, NUM_BLKS	# convert to bytes
-	jz	done_hash
+	jz	.Ldone_hash
 	lea	-64(INP, NUM_BLKS), NUM_BLKS # pointer to last block
 	mov	NUM_BLKS, _INP_END(%rsp)
 
 	cmp	NUM_BLKS, INP
-	je	only_one_block
+	je	.Lonly_one_block
 
 	## load initial digest
 	mov	(CTX), a
@@ -561,7 +561,7 @@ SYM_TYPED_FUNC_START(sha256_transform_rorx)
 
 	mov	CTX, _CTX(%rsp)
 
-loop0:
+.Lloop0:
 	## Load first 16 dwords from two blocks
 	VMOVDQ	0*32(INP),XTMP0
 	VMOVDQ	1*32(INP),XTMP1
@@ -580,7 +580,7 @@ loop0:
 	vperm2i128	$0x20, XTMP3, XTMP1, X2
 	vperm2i128	$0x31, XTMP3, XTMP1, X3
 
-last_block_enter:
+.Llast_block_enter:
 	add	$64, INP
 	mov	INP, _INP(%rsp)
 
@@ -588,34 +588,40 @@ last_block_enter:
 	xor	SRND, SRND
 
 .align 16
-loop1:
-	vpaddd	K256+0*32(SRND), X0, XFER
+.Lloop1:
+	leaq	K256+0*32(%rip), INP		## reuse INP as scratch reg
+	vpaddd	(INP, SRND), X0, XFER
 	vmovdqa XFER, 0*32+_XFER(%rsp, SRND)
 	FOUR_ROUNDS_AND_SCHED	_XFER + 0*32
 
-	vpaddd	K256+1*32(SRND), X0, XFER
+	leaq	K256+1*32(%rip), INP
+	vpaddd	(INP, SRND), X0, XFER
 	vmovdqa XFER, 1*32+_XFER(%rsp, SRND)
 	FOUR_ROUNDS_AND_SCHED	_XFER + 1*32
 
-	vpaddd	K256+2*32(SRND), X0, XFER
+	leaq	K256+2*32(%rip), INP
+	vpaddd	(INP, SRND), X0, XFER
 	vmovdqa XFER, 2*32+_XFER(%rsp, SRND)
 	FOUR_ROUNDS_AND_SCHED	_XFER + 2*32
 
-	vpaddd	K256+3*32(SRND), X0, XFER
+	leaq	K256+3*32(%rip), INP
+	vpaddd	(INP, SRND), X0, XFER
 	vmovdqa XFER, 3*32+_XFER(%rsp, SRND)
 	FOUR_ROUNDS_AND_SCHED	_XFER + 3*32
 
 	add	$4*32, SRND
 	cmp	$3*4*32, SRND
-	jb	loop1
+	jb	.Lloop1
 
-loop2:
+.Lloop2:
 	## Do last 16 rounds with no scheduling
-	vpaddd	K256+0*32(SRND), X0, XFER
+	leaq	K256+0*32(%rip), INP
+	vpaddd	(INP, SRND), X0, XFER
 	vmovdqa XFER, 0*32+_XFER(%rsp, SRND)
 	DO_4ROUNDS	_XFER + 0*32
 
-	vpaddd	K256+1*32(SRND), X1, XFER
+	leaq	K256+1*32(%rip), INP
+	vpaddd	(INP, SRND), X1, XFER
 	vmovdqa XFER, 1*32+_XFER(%rsp, SRND)
 	DO_4ROUNDS	_XFER + 1*32
 	add	$2*32, SRND
@@ -624,7 +630,7 @@ loop2:
 	vmovdqa	X3, X1
 
 	cmp	$4*4*32, SRND
-	jb	loop2
+	jb	.Lloop2
 
 	mov	_CTX(%rsp), CTX
 	mov	_INP(%rsp), INP
@@ -639,17 +645,17 @@ loop2:
 	addm    (4*7)(CTX),h
 
 	cmp	_INP_END(%rsp), INP
-	ja	done_hash
+	ja	.Ldone_hash
 
 	#### Do second block using previously scheduled results
 	xor	SRND, SRND
 .align 16
-loop3:
+.Lloop3:
 	DO_4ROUNDS	 _XFER + 0*32 + 16
 	DO_4ROUNDS	 _XFER + 1*32 + 16
 	add	$2*32, SRND
 	cmp	$4*4*32, SRND
-	jb	loop3
+	jb	.Lloop3
 
 	mov	_CTX(%rsp), CTX
 	mov	_INP(%rsp), INP
@@ -665,10 +671,10 @@ loop3:
 	addm    (4*7)(CTX),h
 
 	cmp	_INP_END(%rsp), INP
-	jb	loop0
-	ja	done_hash
+	jb	.Lloop0
+	ja	.Ldone_hash
 
-do_last_block:
+.Ldo_last_block:
 	VMOVDQ	0*16(INP),XWORD0
 	VMOVDQ	1*16(INP),XWORD1
 	VMOVDQ	2*16(INP),XWORD2
@@ -679,9 +685,9 @@ do_last_block:
 	vpshufb	X_BYTE_FLIP_MASK, XWORD2, XWORD2
 	vpshufb	X_BYTE_FLIP_MASK, XWORD3, XWORD3
 
-	jmp	last_block_enter
+	jmp	.Llast_block_enter
 
-only_one_block:
+.Lonly_one_block:
 
 	## load initial digest
 	mov	(4*0)(CTX),a
@@ -698,9 +704,9 @@ only_one_block:
 	vmovdqa	_SHUF_DC00(%rip), SHUF_DC00
 
 	mov	CTX, _CTX(%rsp)
-	jmp	do_last_block
+	jmp	.Ldo_last_block
 
-done_hash:
+.Ldone_hash:
 
 	mov	%rbp, %rsp
 	pop	%rbp
diff --git a/arch/x86/crypto/sha256-ssse3-asm.S b/arch/x86/crypto/sha256-ssse3-asm.S
index 959288eecc68..93264ee44543 100644
--- a/arch/x86/crypto/sha256-ssse3-asm.S
+++ b/arch/x86/crypto/sha256-ssse3-asm.S
@@ -369,7 +369,7 @@ SYM_TYPED_FUNC_START(sha256_transform_ssse3)
 	and	$~15, %rsp
 
 	shl     $6, NUM_BLKS		 # convert to bytes
-	jz      done_hash
+	jz      .Ldone_hash
 	add     INP, NUM_BLKS
 	mov     NUM_BLKS, _INP_END(%rsp) # pointer to end of data
 
@@ -387,7 +387,7 @@ SYM_TYPED_FUNC_START(sha256_transform_ssse3)
 	movdqa  _SHUF_00BA(%rip), SHUF_00BA
 	movdqa  _SHUF_DC00(%rip), SHUF_DC00
 
-loop0:
+.Lloop0:
 	lea     K256(%rip), TBL
 
 	## byte swap first 16 dwords
@@ -401,7 +401,7 @@ loop0:
 	## schedule 48 input dwords, by doing 3 rounds of 16 each
 	mov     $3, SRND
 .align 16
-loop1:
+.Lloop1:
 	movdqa  (TBL), XFER
 	paddd   X0, XFER
 	movdqa  XFER, _XFER(%rsp)
@@ -424,10 +424,10 @@ loop1:
 	FOUR_ROUNDS_AND_SCHED
 
 	sub     $1, SRND
-	jne     loop1
+	jne     .Lloop1
 
 	mov     $2, SRND
-loop2:
+.Lloop2:
 	paddd   (TBL), X0
 	movdqa  X0, _XFER(%rsp)
 	DO_ROUND        0
@@ -446,7 +446,7 @@ loop2:
 	movdqa  X3, X1
 
 	sub     $1, SRND
-	jne     loop2
+	jne     .Lloop2
 
 	addm    (4*0)(CTX),a
 	addm    (4*1)(CTX),b
@@ -460,9 +460,9 @@ loop2:
 	mov     _INP(%rsp), INP
 	add     $64, INP
 	cmp     _INP_END(%rsp), INP
-	jne     loop0
+	jne     .Lloop0
 
-done_hash:
+.Ldone_hash:
 
 	mov	%rbp, %rsp
 	popq	%rbp
diff --git a/arch/x86/crypto/sha512-avx-asm.S b/arch/x86/crypto/sha512-avx-asm.S
index b0984f19fdb4..d902b8ea0721 100644
--- a/arch/x86/crypto/sha512-avx-asm.S
+++ b/arch/x86/crypto/sha512-avx-asm.S
@@ -276,7 +276,7 @@ frame_size = frame_WK + WK_SIZE
 ########################################################################
 SYM_TYPED_FUNC_START(sha512_transform_avx)
 	test msglen, msglen
-	je nowork
+	je .Lnowork
 
 	# Save GPRs
 	push	%rbx
@@ -291,7 +291,7 @@ SYM_TYPED_FUNC_START(sha512_transform_avx)
 	sub     $frame_size, %rsp
 	and	$~(0x20 - 1), %rsp
 
-updateblock:
+.Lupdateblock:
 
 	# Load state variables
 	mov     DIGEST(0), a_64
@@ -348,7 +348,7 @@ updateblock:
 	# Advance to next message block
 	add     $16*8, msg
 	dec     msglen
-	jnz     updateblock
+	jnz     .Lupdateblock
 
 	# Restore Stack Pointer
 	mov	%rbp, %rsp
@@ -361,7 +361,7 @@ updateblock:
 	pop	%r12
 	pop	%rbx
 
-nowork:
+.Lnowork:
 	RET
 SYM_FUNC_END(sha512_transform_avx)
 
diff --git a/arch/x86/crypto/sha512-avx2-asm.S b/arch/x86/crypto/sha512-avx2-asm.S
index b1ca99055ef9..f08496cd6870 100644
--- a/arch/x86/crypto/sha512-avx2-asm.S
+++ b/arch/x86/crypto/sha512-avx2-asm.S
@@ -581,7 +581,7 @@ SYM_TYPED_FUNC_START(sha512_transform_rorx)
 	and	$~(0x20 - 1), %rsp
 
 	shl	$7, NUM_BLKS	# convert to bytes
-	jz	done_hash
+	jz	.Ldone_hash
 	add	INP, NUM_BLKS	# pointer to end of data
 	mov	NUM_BLKS, frame_INPEND(%rsp)
 
@@ -600,7 +600,7 @@ SYM_TYPED_FUNC_START(sha512_transform_rorx)
 
 	vmovdqa	PSHUFFLE_BYTE_FLIP_MASK(%rip), BYTE_FLIP_MASK
 
-loop0:
+.Lloop0:
 	lea	K512(%rip), TBL
 
 	## byte swap first 16 dwords
@@ -615,7 +615,7 @@ loop0:
 	movq	$4, frame_SRND(%rsp)
 
 .align 16
-loop1:
+.Lloop1:
 	vpaddq	(TBL), Y_0, XFER
 	vmovdqa XFER, frame_XFER(%rsp)
 	FOUR_ROUNDS_AND_SCHED
@@ -634,10 +634,10 @@ loop1:
 	FOUR_ROUNDS_AND_SCHED
 
 	subq	$1, frame_SRND(%rsp)
-	jne	loop1
+	jne	.Lloop1
 
 	movq	$2, frame_SRND(%rsp)
-loop2:
+.Lloop2:
 	vpaddq	(TBL), Y_0, XFER
 	vmovdqa XFER, frame_XFER(%rsp)
 	DO_4ROUNDS
@@ -650,7 +650,7 @@ loop2:
 	vmovdqa	Y_3, Y_1
 
 	subq	$1, frame_SRND(%rsp)
-	jne	loop2
+	jne	.Lloop2
 
 	mov	frame_CTX(%rsp), CTX2
 	addm	8*0(CTX2), a
@@ -665,9 +665,9 @@ loop2:
 	mov	frame_INP(%rsp), INP
 	add	$128, INP
 	cmp	frame_INPEND(%rsp), INP
-	jne	loop0
+	jne	.Lloop0
 
-done_hash:
+.Ldone_hash:
 
 	# Restore Stack Pointer
 	mov	%rbp, %rsp
diff --git a/arch/x86/crypto/sha512-ssse3-asm.S b/arch/x86/crypto/sha512-ssse3-asm.S
index c06afb5270e5..65be30156816 100644
--- a/arch/x86/crypto/sha512-ssse3-asm.S
+++ b/arch/x86/crypto/sha512-ssse3-asm.S
@@ -278,7 +278,7 @@ frame_size = frame_WK + WK_SIZE
 SYM_TYPED_FUNC_START(sha512_transform_ssse3)
 
 	test msglen, msglen
-	je nowork
+	je .Lnowork
 
 	# Save GPRs
 	push	%rbx
@@ -293,7 +293,7 @@ SYM_TYPED_FUNC_START(sha512_transform_ssse3)
 	sub	$frame_size, %rsp
 	and	$~(0x20 - 1), %rsp
 
-updateblock:
+.Lupdateblock:
 
 # Load state variables
 	mov	DIGEST(0), a_64
@@ -350,7 +350,7 @@ updateblock:
 	# Advance to next message block
 	add	$16*8, msg
 	dec	msglen
-	jnz	updateblock
+	jnz	.Lupdateblock
 
 	# Restore Stack Pointer
 	mov	%rbp, %rsp
@@ -363,7 +363,7 @@ updateblock:
 	pop	%r12
 	pop	%rbx
 
-nowork:
+.Lnowork:
 	RET
 SYM_FUNC_END(sha512_transform_ssse3)
 
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index eccc3431e515..f31e286c2977 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -8,7 +8,7 @@
  *
  * entry.S contains the system-call and fault low-level handling routines.
  *
- * Some of this is documented in Documentation/x86/entry_64.rst
+ * Some of this is documented in Documentation/arch/x86/entry_64.rst
  *
  * A note on terminology:
  * - iret frame:	Architecture defined interrupt frame from SS to RIP
@@ -205,7 +205,7 @@ syscall_return_via_sysret:
 	 */
 	movq	%rsp, %rdi
 	movq	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 
 	pushq	RSP-RDI(%rdi)	/* RSP */
 	pushq	(%rdi)		/* RDI */
@@ -286,7 +286,7 @@ SYM_FUNC_END(__switch_to_asm)
 .pushsection .text, "ax"
 	__FUNC_ALIGN
 SYM_CODE_START_NOALIGN(ret_from_fork)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	ANNOTATE_NOENDBR // copy_thread
 	CALL_DEPTH_ACCOUNT
 	movq	%rax, %rdi
@@ -303,7 +303,7 @@ SYM_CODE_START_NOALIGN(ret_from_fork)
 
 1:
 	/* kernel thread */
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	movq	%r12, %rdi
 	CALL_NOSPEC rbx
 	/*
@@ -388,9 +388,9 @@ SYM_CODE_START(\asmsym)
 
 	.if \vector == X86_TRAP_BP
 		/* #BP advances %rip to the next instruction */
-		UNWIND_HINT_IRET_REGS offset=\has_error_code*8 signal=0
+		UNWIND_HINT_IRET_ENTRY offset=\has_error_code*8 signal=0
 	.else
-		UNWIND_HINT_IRET_REGS offset=\has_error_code*8
+		UNWIND_HINT_IRET_ENTRY offset=\has_error_code*8
 	.endif
 
 	ENDBR
@@ -461,7 +461,7 @@ SYM_CODE_END(\asmsym)
  */
 .macro idtentry_mce_db vector asmsym cfunc
 SYM_CODE_START(\asmsym)
-	UNWIND_HINT_IRET_REGS
+	UNWIND_HINT_IRET_ENTRY
 	ENDBR
 	ASM_CLAC
 	cld
@@ -518,7 +518,7 @@ SYM_CODE_END(\asmsym)
  */
 .macro idtentry_vc vector asmsym cfunc
 SYM_CODE_START(\asmsym)
-	UNWIND_HINT_IRET_REGS
+	UNWIND_HINT_IRET_ENTRY
 	ENDBR
 	ASM_CLAC
 	cld
@@ -582,7 +582,7 @@ SYM_CODE_END(\asmsym)
  */
 .macro idtentry_df vector asmsym cfunc
 SYM_CODE_START(\asmsym)
-	UNWIND_HINT_IRET_REGS offset=8
+	UNWIND_HINT_IRET_ENTRY offset=8
 	ENDBR
 	ASM_CLAC
 	cld
@@ -643,7 +643,7 @@ SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
 	 */
 	movq	%rsp, %rdi
 	movq	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 
 	/* Copy the IRET frame to the trampoline stack. */
 	pushq	6*8(%rdi)	/* SS */
@@ -869,7 +869,7 @@ SYM_CODE_END(exc_xen_hypervisor_callback)
  */
 	__FUNC_ALIGN
 SYM_CODE_START_NOALIGN(xen_failsafe_callback)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_UNDEFINED
 	ENDBR
 	movl	%ds, %ecx
 	cmpw	%cx, 0x10(%rsp)
@@ -1027,7 +1027,7 @@ SYM_CODE_START_LOCAL(paranoid_exit)
 	 *
 	 * NB to anyone to try to optimize this code: this code does
 	 * not execute at all for exceptions from user mode. Those
-	 * exceptions go through error_exit instead.
+	 * exceptions go through error_return instead.
 	 */
 	RESTORE_CR3	scratch_reg=%rax save_reg=%r14
 
@@ -1107,7 +1107,7 @@ SYM_CODE_START(error_entry)
 	FENCE_SWAPGS_KERNEL_ENTRY
 	CALL_DEPTH_ACCOUNT
 	leaq	8(%rsp), %rax			/* return pt_regs pointer */
-	ANNOTATE_UNRET_END
+	VALIDATE_UNRET_END
 	RET
 
 .Lbstep_iret:
@@ -1153,7 +1153,7 @@ SYM_CODE_END(error_return)
  *	      when PAGE_TABLE_ISOLATION is in use.  Do not clobber.
  */
 SYM_CODE_START(asm_exc_nmi)
-	UNWIND_HINT_IRET_REGS
+	UNWIND_HINT_IRET_ENTRY
 	ENDBR
 
 	/*
@@ -1520,7 +1520,7 @@ SYM_CODE_END(asm_exc_nmi)
  * MSRs to fully disable 32-bit SYSCALL.
  */
 SYM_CODE_START(ignore_sysret)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	ENDBR
 	mov	$-ENOSYS, %eax
 	sysretl
diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index 1506a22a4fb6..6a1821bd7d5e 100644
--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -3,10 +3,7 @@
 # Building vDSO images for x86.
 #
 
-# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before
-# the inclusion of generic Makefile.
-ARCH_REL_TYPE_ABS := R_X86_64_JUMP_SLOT|R_X86_64_GLOB_DAT|R_X86_64_RELATIVE|
-ARCH_REL_TYPE_ABS += R_386_GLOB_DAT|R_386_JMP_SLOT|R_386_RELATIVE
+# Include the generic Makefile to check the built vdso.
 include $(srctree)/lib/vdso/Makefile
 
 # Sanitizer runtimes are unavailable and cannot be linked here.
diff --git a/arch/x86/entry/vdso/vdso32-setup.c b/arch/x86/entry/vdso/vdso32-setup.c
index 3b300a773c7e..f3b3cacbcbb0 100644
--- a/arch/x86/entry/vdso/vdso32-setup.c
+++ b/arch/x86/entry/vdso/vdso32-setup.c
@@ -70,18 +70,9 @@ static struct ctl_table abi_table2[] = {
 	{}
 };
 
-static struct ctl_table abi_root_table2[] = {
-	{
-		.procname = "abi",
-		.mode = 0555,
-		.child = abi_table2
-	},
-	{}
-};
-
 static __init int ia32_binfmt_init(void)
 {
-	register_sysctl_table(abi_root_table2);
+	register_sysctl("abi", abi_table2);
 	return 0;
 }
 __initcall(ia32_binfmt_init);
diff --git a/arch/x86/entry/vsyscall/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c
index d234ca797e4a..e0ca8120aea8 100644
--- a/arch/x86/entry/vsyscall/vsyscall_64.c
+++ b/arch/x86/entry/vsyscall/vsyscall_64.c
@@ -317,7 +317,7 @@ static struct vm_area_struct gate_vma __ro_after_init = {
 struct vm_area_struct *get_gate_vma(struct mm_struct *mm)
 {
 #ifdef CONFIG_COMPAT
-	if (!mm || !(mm->context.flags & MM_CONTEXT_HAS_VSYSCALL))
+	if (!mm || !test_bit(MM_CONTEXT_HAS_VSYSCALL, &mm->context.flags))
 		return NULL;
 #endif
 	if (vsyscall_mode == NONE)
diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c
index 8c45b198b62f..bccea57dee81 100644
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -923,6 +923,7 @@ static int amd_pmu_v2_handle_irq(struct pt_regs *regs)
 
 		/* Event overflow */
 		handled++;
+		status &= ~mask;
 		perf_sample_data_init(&data, 0, hwc->last_period);
 
 		if (!x86_perf_event_set_period(event))
@@ -933,8 +934,6 @@ static int amd_pmu_v2_handle_irq(struct pt_regs *regs)
 
 		if (perf_event_overflow(event, &data, regs))
 			x86_pmu_stop(event, 0);
-
-		status &= ~mask;
 	}
 
 	/*
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index a3fb996a86a1..070cc4ef2672 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -5470,6 +5470,15 @@ pebs_is_visible(struct kobject *kobj, struct attribute *attr, int i)
 }
 
 static umode_t
+mem_is_visible(struct kobject *kobj, struct attribute *attr, int i)
+{
+	if (attr == &event_attr_mem_ld_aux.attr.attr)
+		return x86_pmu.flags & PMU_FL_MEM_LOADS_AUX ? attr->mode : 0;
+
+	return pebs_is_visible(kobj, attr, i);
+}
+
+static umode_t
 lbr_is_visible(struct kobject *kobj, struct attribute *attr, int i)
 {
 	return x86_pmu.lbr_nr ? attr->mode : 0;
@@ -5496,7 +5505,7 @@ static struct attribute_group group_events_td  = {
 
 static struct attribute_group group_events_mem = {
 	.name       = "events",
-	.is_visible = pebs_is_visible,
+	.is_visible = mem_is_visible,
 };
 
 static struct attribute_group group_events_tsx = {
@@ -6486,6 +6495,10 @@ __init int intel_pmu_init(void)
 
 	case INTEL_FAM6_SAPPHIRERAPIDS_X:
 	case INTEL_FAM6_EMERALDRAPIDS_X:
+		x86_pmu.flags |= PMU_FL_MEM_LOADS_AUX;
+		fallthrough;
+	case INTEL_FAM6_GRANITERAPIDS_X:
+	case INTEL_FAM6_GRANITERAPIDS_D:
 		pmem = true;
 		x86_pmu.late_ack = true;
 		memcpy(hw_cache_event_ids, spr_hw_cache_event_ids, sizeof(hw_cache_event_ids));
@@ -6502,7 +6515,6 @@ __init int intel_pmu_init(void)
 		x86_pmu.flags |= PMU_FL_HAS_RSP_1;
 		x86_pmu.flags |= PMU_FL_NO_HT_SHARING;
 		x86_pmu.flags |= PMU_FL_INSTR_LATENCY;
-		x86_pmu.flags |= PMU_FL_MEM_LOADS_AUX;
 
 		x86_pmu.hw_config = hsw_hw_config;
 		x86_pmu.get_event_constraints = spr_get_event_constraints;
diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c
index 551741e79e03..835862c548cc 100644
--- a/arch/x86/events/intel/cstate.c
+++ b/arch/x86/events/intel/cstate.c
@@ -678,6 +678,8 @@ static const struct x86_cpu_id intel_cstates_match[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,		&icx_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X,	&icx_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X,	&icx_cstates),
+	X86_MATCH_INTEL_FAM6_MODEL(GRANITERAPIDS_X,	&icx_cstates),
+	X86_MATCH_INTEL_FAM6_MODEL(GRANITERAPIDS_D,	&icx_cstates),
 
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L,		&icl_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE,		&icl_cstates),
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 7d1199554fe3..fa9b209a11fa 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -6068,6 +6068,17 @@ static struct intel_uncore_ops spr_uncore_mmio_ops = {
 	.read_counter		= uncore_mmio_read_counter,
 };
 
+static struct uncore_event_desc spr_uncore_imc_events[] = {
+	INTEL_UNCORE_EVENT_DESC(clockticks,      "event=0x01,umask=0x00"),
+	INTEL_UNCORE_EVENT_DESC(cas_count_read,  "event=0x05,umask=0xcf"),
+	INTEL_UNCORE_EVENT_DESC(cas_count_read.scale, "6.103515625e-5"),
+	INTEL_UNCORE_EVENT_DESC(cas_count_read.unit, "MiB"),
+	INTEL_UNCORE_EVENT_DESC(cas_count_write, "event=0x05,umask=0xf0"),
+	INTEL_UNCORE_EVENT_DESC(cas_count_write.scale, "6.103515625e-5"),
+	INTEL_UNCORE_EVENT_DESC(cas_count_write.unit, "MiB"),
+	{ /* end: all zeroes */ },
+};
+
 static struct intel_uncore_type spr_uncore_imc = {
 	SPR_UNCORE_COMMON_FORMAT(),
 	.name			= "imc",
@@ -6075,6 +6086,7 @@ static struct intel_uncore_type spr_uncore_imc = {
 	.fixed_ctr		= SNR_IMC_MMIO_PMON_FIXED_CTR,
 	.fixed_ctl		= SNR_IMC_MMIO_PMON_FIXED_CTL,
 	.ops			= &spr_uncore_mmio_ops,
+	.event_descs		= spr_uncore_imc_events,
 };
 
 static void spr_uncore_pci_enable_event(struct intel_uncore_box *box,
diff --git a/arch/x86/events/msr.c b/arch/x86/events/msr.c
index c65d8906cbcf..0feaaa571303 100644
--- a/arch/x86/events/msr.c
+++ b/arch/x86/events/msr.c
@@ -70,6 +70,8 @@ static bool test_intel(int idx, void *data)
 	case INTEL_FAM6_BROADWELL_X:
 	case INTEL_FAM6_SAPPHIRERAPIDS_X:
 	case INTEL_FAM6_EMERALDRAPIDS_X:
+	case INTEL_FAM6_GRANITERAPIDS_X:
+	case INTEL_FAM6_GRANITERAPIDS_D:
 
 	case INTEL_FAM6_ATOM_SILVERMONT:
 	case INTEL_FAM6_ATOM_SILVERMONT_D:
diff --git a/arch/x86/hyperv/Makefile b/arch/x86/hyperv/Makefile
index 5d2de10809ae..3a1548054b48 100644
--- a/arch/x86/hyperv/Makefile
+++ b/arch/x86/hyperv/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-y			:= hv_init.o mmu.o nested.o irqdomain.o ivm.o
 obj-$(CONFIG_X86_64)	+= hv_apic.o hv_proc.o
+obj-$(CONFIG_HYPERV_VTL_MODE)	+= hv_vtl.o
 
 ifdef CONFIG_X86_64
 obj-$(CONFIG_PARAVIRT_SPINLOCKS)	+= hv_spinlock.o
diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c
index fb8b2c088681..1fbda2f94184 100644
--- a/arch/x86/hyperv/hv_apic.c
+++ b/arch/x86/hyperv/hv_apic.c
@@ -96,6 +96,11 @@ static void hv_apic_eoi_write(u32 reg, u32 val)
 	wrmsr(HV_X64_MSR_EOI, val, 0);
 }
 
+static bool cpu_is_self(int cpu)
+{
+	return cpu == smp_processor_id();
+}
+
 /*
  * IPI implementation on Hyper-V.
  */
@@ -128,10 +133,9 @@ static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector,
 	 */
 	if (!cpumask_equal(mask, cpu_present_mask) || exclude_self) {
 		ipi_arg->vp_set.format = HV_GENERIC_SET_SPARSE_4K;
-		if (exclude_self)
-			nr_bank = cpumask_to_vpset_noself(&(ipi_arg->vp_set), mask);
-		else
-			nr_bank = cpumask_to_vpset(&(ipi_arg->vp_set), mask);
+
+		nr_bank = cpumask_to_vpset_skip(&(ipi_arg->vp_set), mask,
+				exclude_self ? cpu_is_self : NULL);
 
 		/*
 		 * 'nr_bank <= 0' means some CPUs in cpumask can't be
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 41ef036ebb7b..a5f9474f08e1 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -29,7 +29,6 @@
 #include <linux/syscore_ops.h>
 #include <clocksource/hyperv_timer.h>
 #include <linux/highmem.h>
-#include <linux/swiotlb.h>
 
 int hyperv_init_cpuhp;
 u64 hv_current_partition_id = ~0ull;
@@ -64,7 +63,10 @@ static int hyperv_init_ghcb(void)
 	 * memory boundary and map it here.
 	 */
 	rdmsrl(MSR_AMD64_SEV_ES_GHCB, ghcb_gpa);
-	ghcb_va = memremap(ghcb_gpa, HV_HYP_PAGE_SIZE, MEMREMAP_WB);
+
+	/* Mask out vTOM bit. ioremap_cache() maps decrypted */
+	ghcb_gpa &= ~ms_hyperv.shared_gpa_boundary;
+	ghcb_va = (void *)ioremap_cache(ghcb_gpa, HV_HYP_PAGE_SIZE);
 	if (!ghcb_va)
 		return -ENOMEM;
 
@@ -218,7 +220,7 @@ static int hv_cpu_die(unsigned int cpu)
 	if (hv_ghcb_pg) {
 		ghcb_va = (void **)this_cpu_ptr(hv_ghcb_pg);
 		if (*ghcb_va)
-			memunmap(*ghcb_va);
+			iounmap(*ghcb_va);
 		*ghcb_va = NULL;
 	}
 
@@ -504,16 +506,6 @@ void __init hyperv_init(void)
 	/* Query the VMs extended capability once, so that it can be cached. */
 	hv_query_ext_cap(0);
 
-#ifdef CONFIG_SWIOTLB
-	/*
-	 * Swiotlb bounce buffer needs to be mapped in extra address
-	 * space. Map function doesn't work in the early place and so
-	 * call swiotlb_update_mem_attributes() here.
-	 */
-	if (hv_is_isolation_supported())
-		swiotlb_update_mem_attributes();
-#endif
-
 	return;
 
 clean_guest_os_id:
diff --git a/arch/x86/hyperv/hv_vtl.c b/arch/x86/hyperv/hv_vtl.c
new file mode 100644
index 000000000000..1ba5d3b99b16
--- /dev/null
+++ b/arch/x86/hyperv/hv_vtl.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023, Microsoft Corporation.
+ *
+ * Author:
+ *   Saurabh Sengar <ssengar@microsoft.com>
+ */
+
+#include <asm/apic.h>
+#include <asm/boot.h>
+#include <asm/desc.h>
+#include <asm/i8259.h>
+#include <asm/mshyperv.h>
+#include <asm/realmode.h>
+
+extern struct boot_params boot_params;
+static struct real_mode_header hv_vtl_real_mode_header;
+
+void __init hv_vtl_init_platform(void)
+{
+	pr_info("Linux runs in Hyper-V Virtual Trust Level\n");
+
+	x86_init.irqs.pre_vector_init = x86_init_noop;
+	x86_init.timers.timer_init = x86_init_noop;
+
+	x86_platform.get_wallclock = get_rtc_noop;
+	x86_platform.set_wallclock = set_rtc_noop;
+	x86_platform.get_nmi_reason = hv_get_nmi_reason;
+
+	x86_platform.legacy.i8042 = X86_LEGACY_I8042_PLATFORM_ABSENT;
+	x86_platform.legacy.rtc = 0;
+	x86_platform.legacy.warm_reset = 0;
+	x86_platform.legacy.reserve_bios_regions = 0;
+	x86_platform.legacy.devices.pnpbios = 0;
+}
+
+static inline u64 hv_vtl_system_desc_base(struct ldttss_desc *desc)
+{
+	return ((u64)desc->base3 << 32) | ((u64)desc->base2 << 24) |
+		(desc->base1 << 16) | desc->base0;
+}
+
+static inline u32 hv_vtl_system_desc_limit(struct ldttss_desc *desc)
+{
+	return ((u32)desc->limit1 << 16) | (u32)desc->limit0;
+}
+
+typedef void (*secondary_startup_64_fn)(void*, void*);
+static void hv_vtl_ap_entry(void)
+{
+	((secondary_startup_64_fn)secondary_startup_64)(&boot_params, &boot_params);
+}
+
+static int hv_vtl_bringup_vcpu(u32 target_vp_index, u64 eip_ignored)
+{
+	u64 status;
+	int ret = 0;
+	struct hv_enable_vp_vtl *input;
+	unsigned long irq_flags;
+
+	struct desc_ptr gdt_ptr;
+	struct desc_ptr idt_ptr;
+
+	struct ldttss_desc *tss;
+	struct ldttss_desc *ldt;
+	struct desc_struct *gdt;
+
+	u64 rsp = current->thread.sp;
+	u64 rip = (u64)&hv_vtl_ap_entry;
+
+	native_store_gdt(&gdt_ptr);
+	store_idt(&idt_ptr);
+
+	gdt = (struct desc_struct *)((void *)(gdt_ptr.address));
+	tss = (struct ldttss_desc *)(gdt + GDT_ENTRY_TSS);
+	ldt = (struct ldttss_desc *)(gdt + GDT_ENTRY_LDT);
+
+	local_irq_save(irq_flags);
+
+	input = *this_cpu_ptr(hyperv_pcpu_input_arg);
+	memset(input, 0, sizeof(*input));
+
+	input->partition_id = HV_PARTITION_ID_SELF;
+	input->vp_index = target_vp_index;
+	input->target_vtl.target_vtl = HV_VTL_MGMT;
+
+	/*
+	 * The x86_64 Linux kernel follows the 16-bit -> 32-bit -> 64-bit
+	 * mode transition sequence after waking up an AP with SIPI whose
+	 * vector points to the 16-bit AP startup trampoline code. Here in
+	 * VTL2, we can't perform that sequence as the AP has to start in
+	 * the 64-bit mode.
+	 *
+	 * To make this happen, we tell the hypervisor to load a valid 64-bit
+	 * context (most of which is just magic numbers from the CPU manual)
+	 * so that AP jumps right to the 64-bit entry of the kernel, and the
+	 * control registers are loaded with values that let the AP fetch the
+	 * code and data and carry on with work it gets assigned.
+	 */
+
+	input->vp_context.rip = rip;
+	input->vp_context.rsp = rsp;
+	input->vp_context.rflags = 0x0000000000000002;
+	input->vp_context.efer = __rdmsr(MSR_EFER);
+	input->vp_context.cr0 = native_read_cr0();
+	input->vp_context.cr3 = __native_read_cr3();
+	input->vp_context.cr4 = native_read_cr4();
+	input->vp_context.msr_cr_pat = __rdmsr(MSR_IA32_CR_PAT);
+	input->vp_context.idtr.limit = idt_ptr.size;
+	input->vp_context.idtr.base = idt_ptr.address;
+	input->vp_context.gdtr.limit = gdt_ptr.size;
+	input->vp_context.gdtr.base = gdt_ptr.address;
+
+	/* Non-system desc (64bit), long, code, present */
+	input->vp_context.cs.selector = __KERNEL_CS;
+	input->vp_context.cs.base = 0;
+	input->vp_context.cs.limit = 0xffffffff;
+	input->vp_context.cs.attributes = 0xa09b;
+	/* Non-system desc (64bit), data, present, granularity, default */
+	input->vp_context.ss.selector = __KERNEL_DS;
+	input->vp_context.ss.base = 0;
+	input->vp_context.ss.limit = 0xffffffff;
+	input->vp_context.ss.attributes = 0xc093;
+
+	/* System desc (128bit), present, LDT */
+	input->vp_context.ldtr.selector = GDT_ENTRY_LDT * 8;
+	input->vp_context.ldtr.base = hv_vtl_system_desc_base(ldt);
+	input->vp_context.ldtr.limit = hv_vtl_system_desc_limit(ldt);
+	input->vp_context.ldtr.attributes = 0x82;
+
+	/* System desc (128bit), present, TSS, 0x8b - busy, 0x89 -- default */
+	input->vp_context.tr.selector = GDT_ENTRY_TSS * 8;
+	input->vp_context.tr.base = hv_vtl_system_desc_base(tss);
+	input->vp_context.tr.limit = hv_vtl_system_desc_limit(tss);
+	input->vp_context.tr.attributes = 0x8b;
+
+	status = hv_do_hypercall(HVCALL_ENABLE_VP_VTL, input, NULL);
+
+	if (!hv_result_success(status) &&
+	    hv_result(status) != HV_STATUS_VTL_ALREADY_ENABLED) {
+		pr_err("HVCALL_ENABLE_VP_VTL failed for VP : %d ! [Err: %#llx\n]",
+		       target_vp_index, status);
+		ret = -EINVAL;
+		goto free_lock;
+	}
+
+	status = hv_do_hypercall(HVCALL_START_VP, input, NULL);
+
+	if (!hv_result_success(status)) {
+		pr_err("HVCALL_START_VP failed for VP : %d ! [Err: %#llx]\n",
+		       target_vp_index, status);
+		ret = -EINVAL;
+	}
+
+free_lock:
+	local_irq_restore(irq_flags);
+
+	return ret;
+}
+
+static int hv_vtl_apicid_to_vp_id(u32 apic_id)
+{
+	u64 control;
+	u64 status;
+	unsigned long irq_flags;
+	struct hv_get_vp_from_apic_id_in *input;
+	u32 *output, ret;
+
+	local_irq_save(irq_flags);
+
+	input = *this_cpu_ptr(hyperv_pcpu_input_arg);
+	memset(input, 0, sizeof(*input));
+	input->partition_id = HV_PARTITION_ID_SELF;
+	input->apic_ids[0] = apic_id;
+
+	output = (u32 *)input;
+
+	control = HV_HYPERCALL_REP_COMP_1 | HVCALL_GET_VP_ID_FROM_APIC_ID;
+	status = hv_do_hypercall(control, input, output);
+	ret = output[0];
+
+	local_irq_restore(irq_flags);
+
+	if (!hv_result_success(status)) {
+		pr_err("failed to get vp id from apic id %d, status %#llx\n",
+		       apic_id, status);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int hv_vtl_wakeup_secondary_cpu(int apicid, unsigned long start_eip)
+{
+	int vp_id;
+
+	pr_debug("Bringing up CPU with APIC ID %d in VTL2...\n", apicid);
+	vp_id = hv_vtl_apicid_to_vp_id(apicid);
+
+	if (vp_id < 0) {
+		pr_err("Couldn't find CPU with APIC ID %d\n", apicid);
+		return -EINVAL;
+	}
+	if (vp_id > ms_hyperv.max_vp_index) {
+		pr_err("Invalid CPU id %d for APIC ID %d\n", vp_id, apicid);
+		return -EINVAL;
+	}
+
+	return hv_vtl_bringup_vcpu(vp_id, start_eip);
+}
+
+static int __init hv_vtl_early_init(void)
+{
+	/*
+	 * `boot_cpu_has` returns the runtime feature support,
+	 * and here is the earliest it can be used.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_XSAVE))
+		panic("XSAVE has to be disabled as it is not supported by this module.\n"
+			  "Please add 'noxsave' to the kernel command line.\n");
+
+	real_mode_header = &hv_vtl_real_mode_header;
+	apic->wakeup_secondary_cpu_64 = hv_vtl_wakeup_secondary_cpu;
+
+	return 0;
+}
+early_initcall(hv_vtl_early_init);
diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c
index 1dbcbd9da74d..cc92388b7a99 100644
--- a/arch/x86/hyperv/ivm.c
+++ b/arch/x86/hyperv/ivm.c
@@ -13,6 +13,8 @@
 #include <asm/svm.h>
 #include <asm/sev.h>
 #include <asm/io.h>
+#include <asm/coco.h>
+#include <asm/mem_encrypt.h>
 #include <asm/mshyperv.h>
 #include <asm/hypervisor.h>
 
@@ -127,7 +129,7 @@ static enum es_result hv_ghcb_hv_call(struct ghcb *ghcb, u64 exit_code,
 		return ES_OK;
 }
 
-void hv_ghcb_terminate(unsigned int set, unsigned int reason)
+void __noreturn hv_ghcb_terminate(unsigned int set, unsigned int reason)
 {
 	u64 val = GHCB_MSR_TERM_REQ;
 
@@ -233,41 +235,6 @@ void hv_ghcb_msr_read(u64 msr, u64 *value)
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL_GPL(hv_ghcb_msr_read);
-#endif
-
-enum hv_isolation_type hv_get_isolation_type(void)
-{
-	if (!(ms_hyperv.priv_high & HV_ISOLATION))
-		return HV_ISOLATION_TYPE_NONE;
-	return FIELD_GET(HV_ISOLATION_TYPE, ms_hyperv.isolation_config_b);
-}
-EXPORT_SYMBOL_GPL(hv_get_isolation_type);
-
-/*
- * hv_is_isolation_supported - Check system runs in the Hyper-V
- * isolation VM.
- */
-bool hv_is_isolation_supported(void)
-{
-	if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
-		return false;
-
-	if (!hypervisor_is_type(X86_HYPER_MS_HYPERV))
-		return false;
-
-	return hv_get_isolation_type() != HV_ISOLATION_TYPE_NONE;
-}
-
-DEFINE_STATIC_KEY_FALSE(isolation_type_snp);
-
-/*
- * hv_isolation_type_snp - Check system runs in the AMD SEV-SNP based
- * isolation VM.
- */
-bool hv_isolation_type_snp(void)
-{
-	return static_branch_unlikely(&isolation_type_snp);
-}
 
 /*
  * hv_mark_gpa_visibility - Set pages visible to host via hvcall.
@@ -320,27 +287,25 @@ static int hv_mark_gpa_visibility(u16 count, const u64 pfn[],
 }
 
 /*
- * hv_set_mem_host_visibility - Set specified memory visible to host.
+ * hv_vtom_set_host_visibility - Set specified memory visible to host.
  *
  * In Isolation VM, all guest memory is encrypted from host and guest
  * needs to set memory visible to host via hvcall before sharing memory
  * with host. This function works as wrap of hv_mark_gpa_visibility()
  * with memory base and size.
  */
-int hv_set_mem_host_visibility(unsigned long kbuffer, int pagecount, bool visible)
+static bool hv_vtom_set_host_visibility(unsigned long kbuffer, int pagecount, bool enc)
 {
-	enum hv_mem_host_visibility visibility = visible ?
-			VMBUS_PAGE_VISIBLE_READ_WRITE : VMBUS_PAGE_NOT_VISIBLE;
+	enum hv_mem_host_visibility visibility = enc ?
+			VMBUS_PAGE_NOT_VISIBLE : VMBUS_PAGE_VISIBLE_READ_WRITE;
 	u64 *pfn_array;
 	int ret = 0;
+	bool result = true;
 	int i, pfn;
 
-	if (!hv_is_isolation_supported() || !hv_hypercall_pg)
-		return 0;
-
 	pfn_array = kmalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL);
 	if (!pfn_array)
-		return -ENOMEM;
+		return false;
 
 	for (i = 0, pfn = 0; i < pagecount; i++) {
 		pfn_array[pfn] = virt_to_hvpfn((void *)kbuffer + i * HV_HYP_PAGE_SIZE);
@@ -349,41 +314,98 @@ int hv_set_mem_host_visibility(unsigned long kbuffer, int pagecount, bool visibl
 		if (pfn == HV_MAX_MODIFY_GPA_REP_COUNT || i == pagecount - 1) {
 			ret = hv_mark_gpa_visibility(pfn, pfn_array,
 						     visibility);
-			if (ret)
+			if (ret) {
+				result = false;
 				goto err_free_pfn_array;
+			}
 			pfn = 0;
 		}
 	}
 
  err_free_pfn_array:
 	kfree(pfn_array);
-	return ret;
+	return result;
 }
 
-/*
- * hv_map_memory - map memory to extra space in the AMD SEV-SNP Isolation VM.
- */
-void *hv_map_memory(void *addr, unsigned long size)
+static bool hv_vtom_tlb_flush_required(bool private)
 {
-	unsigned long *pfns = kcalloc(size / PAGE_SIZE,
-				      sizeof(unsigned long), GFP_KERNEL);
-	void *vaddr;
-	int i;
+	return true;
+}
+
+static bool hv_vtom_cache_flush_required(void)
+{
+	return false;
+}
 
-	if (!pfns)
-		return NULL;
+static bool hv_is_private_mmio(u64 addr)
+{
+	/*
+	 * Hyper-V always provides a single IO-APIC in a guest VM.
+	 * When a paravisor is used, it is emulated by the paravisor
+	 * in the guest context and must be mapped private.
+	 */
+	if (addr >= HV_IOAPIC_BASE_ADDRESS &&
+	    addr < (HV_IOAPIC_BASE_ADDRESS + PAGE_SIZE))
+		return true;
+
+	/* Same with a vTPM */
+	if (addr >= VTPM_BASE_ADDRESS &&
+	    addr < (VTPM_BASE_ADDRESS + PAGE_SIZE))
+		return true;
+
+	return false;
+}
+
+void __init hv_vtom_init(void)
+{
+	/*
+	 * By design, a VM using vTOM doesn't see the SEV setting,
+	 * so SEV initialization is bypassed and sev_status isn't set.
+	 * Set it here to indicate a vTOM VM.
+	 */
+	sev_status = MSR_AMD64_SNP_VTOM;
+	cc_set_vendor(CC_VENDOR_AMD);
+	cc_set_mask(ms_hyperv.shared_gpa_boundary);
+	physical_mask &= ms_hyperv.shared_gpa_boundary - 1;
+
+	x86_platform.hyper.is_private_mmio = hv_is_private_mmio;
+	x86_platform.guest.enc_cache_flush_required = hv_vtom_cache_flush_required;
+	x86_platform.guest.enc_tlb_flush_required = hv_vtom_tlb_flush_required;
+	x86_platform.guest.enc_status_change_finish = hv_vtom_set_host_visibility;
+}
+
+#endif /* CONFIG_AMD_MEM_ENCRYPT */
+
+enum hv_isolation_type hv_get_isolation_type(void)
+{
+	if (!(ms_hyperv.priv_high & HV_ISOLATION))
+		return HV_ISOLATION_TYPE_NONE;
+	return FIELD_GET(HV_ISOLATION_TYPE, ms_hyperv.isolation_config_b);
+}
+EXPORT_SYMBOL_GPL(hv_get_isolation_type);
 
-	for (i = 0; i < size / PAGE_SIZE; i++)
-		pfns[i] = vmalloc_to_pfn(addr + i * PAGE_SIZE) +
-			(ms_hyperv.shared_gpa_boundary >> PAGE_SHIFT);
+/*
+ * hv_is_isolation_supported - Check system runs in the Hyper-V
+ * isolation VM.
+ */
+bool hv_is_isolation_supported(void)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
+		return false;
 
-	vaddr = vmap_pfn(pfns, size / PAGE_SIZE, PAGE_KERNEL_IO);
-	kfree(pfns);
+	if (!hypervisor_is_type(X86_HYPER_MS_HYPERV))
+		return false;
 
-	return vaddr;
+	return hv_get_isolation_type() != HV_ISOLATION_TYPE_NONE;
 }
 
-void hv_unmap_memory(void *addr)
+DEFINE_STATIC_KEY_FALSE(isolation_type_snp);
+
+/*
+ * hv_isolation_type_snp - Check system runs in the AMD SEV-SNP based
+ * isolation VM.
+ */
+bool hv_isolation_type_snp(void)
 {
-	vunmap(addr);
+	return static_branch_unlikely(&isolation_type_snp);
 }
diff --git a/arch/x86/hyperv/mmu.c b/arch/x86/hyperv/mmu.c
index 0ad2378fe6ad..8460bd35e10c 100644
--- a/arch/x86/hyperv/mmu.c
+++ b/arch/x86/hyperv/mmu.c
@@ -52,6 +52,11 @@ static inline int fill_gva_list(u64 gva_list[], int offset,
 	return gva_n - offset;
 }
 
+static bool cpu_is_lazy(int cpu)
+{
+	return per_cpu(cpu_tlbstate_shared.is_lazy, cpu);
+}
+
 static void hyperv_flush_tlb_multi(const struct cpumask *cpus,
 				   const struct flush_tlb_info *info)
 {
@@ -60,6 +65,7 @@ static void hyperv_flush_tlb_multi(const struct cpumask *cpus,
 	struct hv_tlb_flush *flush;
 	u64 status;
 	unsigned long flags;
+	bool do_lazy = !info->freed_tables;
 
 	trace_hyperv_mmu_flush_tlb_multi(cpus, info);
 
@@ -112,6 +118,8 @@ static void hyperv_flush_tlb_multi(const struct cpumask *cpus,
 			goto do_ex_hypercall;
 
 		for_each_cpu(cpu, cpus) {
+			if (do_lazy && cpu_is_lazy(cpu))
+				continue;
 			vcpu = hv_cpu_number_to_vp_number(cpu);
 			if (vcpu == VP_INVAL) {
 				local_irq_restore(flags);
@@ -198,7 +206,8 @@ static u64 hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
 	flush->hv_vp_set.valid_bank_mask = 0;
 
 	flush->hv_vp_set.format = HV_GENERIC_SET_SPARSE_4K;
-	nr_bank = cpumask_to_vpset(&(flush->hv_vp_set), cpus);
+	nr_bank = cpumask_to_vpset_skip(&flush->hv_vp_set, cpus,
+			info->freed_tables ? NULL : cpu_is_lazy);
 	if (nr_bank < 0)
 		return HV_STATUS_INVALID_PARAMETER;
 
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index e2975a32d443..d7da28fada87 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -8,7 +8,7 @@
 
 #define ALT_FLAGS_SHIFT		16
 
-#define ALT_FLAG_NOT		BIT(0)
+#define ALT_FLAG_NOT		(1 << 0)
 #define ALT_NOT(feature)	((ALT_FLAG_NOT << ALT_FLAGS_SHIFT) | (feature))
 
 #ifndef __ASSEMBLY__
diff --git a/arch/x86/include/asm/bootparam_utils.h b/arch/x86/include/asm/bootparam_utils.h
index 53e9b0620d96..d90ae472fb76 100644
--- a/arch/x86/include/asm/bootparam_utils.h
+++ b/arch/x86/include/asm/bootparam_utils.h
@@ -38,7 +38,7 @@ static void sanitize_boot_params(struct boot_params *boot_params)
 	 * IMPORTANT NOTE TO BOOTLOADER AUTHORS: do not simply clear
 	 * this field.  The purpose of this field is to guarantee
 	 * compliance with the x86 boot spec located in
-	 * Documentation/x86/boot.rst .  That spec says that the
+	 * Documentation/arch/x86/boot.rst .  That spec says that the
 	 * *whole* structure should be cleared, after which only the
 	 * portion defined by struct setup_header (boot_params->hdr)
 	 * should be copied in.
diff --git a/arch/x86/include/asm/coco.h b/arch/x86/include/asm/coco.h
index 3d98c3a60d34..eb08796002f3 100644
--- a/arch/x86/include/asm/coco.h
+++ b/arch/x86/include/asm/coco.h
@@ -7,17 +7,33 @@
 enum cc_vendor {
 	CC_VENDOR_NONE,
 	CC_VENDOR_AMD,
-	CC_VENDOR_HYPERV,
 	CC_VENDOR_INTEL,
 };
 
-void cc_set_vendor(enum cc_vendor v);
-void cc_set_mask(u64 mask);
-
 #ifdef CONFIG_ARCH_HAS_CC_PLATFORM
+extern enum cc_vendor cc_vendor;
+
+static inline enum cc_vendor cc_get_vendor(void)
+{
+	return cc_vendor;
+}
+
+static inline void cc_set_vendor(enum cc_vendor vendor)
+{
+	cc_vendor = vendor;
+}
+
+void cc_set_mask(u64 mask);
 u64 cc_mkenc(u64 val);
 u64 cc_mkdec(u64 val);
 #else
+static inline enum cc_vendor cc_get_vendor(void)
+{
+	return CC_VENDOR_NONE;
+}
+
+static inline void cc_set_vendor(enum cc_vendor vendor) { }
+
 static inline u64 cc_mkenc(u64 val)
 {
 	return val;
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 73c9672c123b..353b054812de 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -321,6 +321,7 @@
 #define X86_FEATURE_LKGS		(12*32+18) /* "" Load "kernel" (userspace) GS */
 #define X86_FEATURE_AMX_FP16		(12*32+21) /* "" AMX fp16 Support */
 #define X86_FEATURE_AVX_IFMA            (12*32+23) /* "" Support for VPMADD52[H,L]UQ */
+#define X86_FEATURE_LAM			(12*32+26) /* Linear Address Masking */
 
 /* AMD-defined CPU features, CPUID level 0x80000008 (EBX), word 13 */
 #define X86_FEATURE_CLZERO		(13*32+ 0) /* CLZERO instruction */
diff --git a/arch/x86/include/asm/disabled-features.h b/arch/x86/include/asm/disabled-features.h
index 5dfa4fb76f4b..fafe9be7a6f4 100644
--- a/arch/x86/include/asm/disabled-features.h
+++ b/arch/x86/include/asm/disabled-features.h
@@ -75,6 +75,12 @@
 # define DISABLE_CALL_DEPTH_TRACKING	(1 << (X86_FEATURE_CALL_DEPTH & 31))
 #endif
 
+#ifdef CONFIG_ADDRESS_MASKING
+# define DISABLE_LAM		0
+#else
+# define DISABLE_LAM		(1 << (X86_FEATURE_LAM & 31))
+#endif
+
 #ifdef CONFIG_INTEL_IOMMU_SVM
 # define DISABLE_ENQCMD		0
 #else
@@ -115,7 +121,7 @@
 #define DISABLED_MASK10	0
 #define DISABLED_MASK11	(DISABLE_RETPOLINE|DISABLE_RETHUNK|DISABLE_UNRET| \
 			 DISABLE_CALL_DEPTH_TRACKING)
-#define DISABLED_MASK12	0
+#define DISABLED_MASK12	(DISABLE_LAM)
 #define DISABLED_MASK13	0
 #define DISABLED_MASK14	0
 #define DISABLED_MASK15	0
diff --git a/arch/x86/include/asm/hyperv-tlfs.h b/arch/x86/include/asm/hyperv-tlfs.h
index 0b73a809e9e1..cea95dcd27c2 100644
--- a/arch/x86/include/asm/hyperv-tlfs.h
+++ b/arch/x86/include/asm/hyperv-tlfs.h
@@ -122,6 +122,9 @@
 /* Recommend using enlightened VMCS */
 #define HV_X64_ENLIGHTENED_VMCS_RECOMMENDED		BIT(14)
 
+/* Use hypercalls for MMIO config space access */
+#define HV_X64_USE_MMIO_HYPERCALLS			BIT(21)
+
 /*
  * CPU management features identification.
  * These are HYPERV_CPUID_CPU_MANAGEMENT_FEATURES.EAX bits.
@@ -713,6 +716,81 @@ union hv_msi_entry {
 	} __packed;
 };
 
+struct hv_x64_segment_register {
+	u64 base;
+	u32 limit;
+	u16 selector;
+	union {
+		struct {
+			u16 segment_type : 4;
+			u16 non_system_segment : 1;
+			u16 descriptor_privilege_level : 2;
+			u16 present : 1;
+			u16 reserved : 4;
+			u16 available : 1;
+			u16 _long : 1;
+			u16 _default : 1;
+			u16 granularity : 1;
+		} __packed;
+		u16 attributes;
+	};
+} __packed;
+
+struct hv_x64_table_register {
+	u16 pad[3];
+	u16 limit;
+	u64 base;
+} __packed;
+
+struct hv_init_vp_context {
+	u64 rip;
+	u64 rsp;
+	u64 rflags;
+
+	struct hv_x64_segment_register cs;
+	struct hv_x64_segment_register ds;
+	struct hv_x64_segment_register es;
+	struct hv_x64_segment_register fs;
+	struct hv_x64_segment_register gs;
+	struct hv_x64_segment_register ss;
+	struct hv_x64_segment_register tr;
+	struct hv_x64_segment_register ldtr;
+
+	struct hv_x64_table_register idtr;
+	struct hv_x64_table_register gdtr;
+
+	u64 efer;
+	u64 cr0;
+	u64 cr3;
+	u64 cr4;
+	u64 msr_cr_pat;
+} __packed;
+
+union hv_input_vtl {
+	u8 as_uint8;
+	struct {
+		u8 target_vtl: 4;
+		u8 use_target_vtl: 1;
+		u8 reserved_z: 3;
+	};
+} __packed;
+
+struct hv_enable_vp_vtl {
+	u64				partition_id;
+	u32				vp_index;
+	union hv_input_vtl		target_vtl;
+	u8				mbz0;
+	u16				mbz1;
+	struct hv_init_vp_context	vp_context;
+} __packed;
+
+struct hv_get_vp_from_apic_id_in {
+	u64 partition_id;
+	union hv_input_vtl target_vtl;
+	u8 res[7];
+	u32 apic_ids[];
+} __packed;
+
 #include <asm-generic/hyperv-tlfs.h>
 
 #endif
diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index cbaf174d8efd..b3af2d45bbbb 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -125,6 +125,8 @@
 
 #define INTEL_FAM6_LUNARLAKE_M		0xBD
 
+#define INTEL_FAM6_ARROWLAKE		0xC6
+
 /* "Small Core" Processors (Atom/E-Core) */
 
 #define INTEL_FAM6_ATOM_BONNELL		0x1C /* Diamondville, Pineview */
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index c201083b34f6..a3abdcd89a32 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -20,25 +20,4 @@ extern void intel_mid_pwr_power_off(void);
 
 extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev);
 
-#ifdef CONFIG_X86_INTEL_MID
-
-extern void intel_scu_devices_create(void);
-extern void intel_scu_devices_destroy(void);
-
-#else /* !CONFIG_X86_INTEL_MID */
-
-static inline void intel_scu_devices_create(void) { }
-static inline void intel_scu_devices_destroy(void) { }
-
-#endif /* !CONFIG_X86_INTEL_MID */
-
-/* Bus Select SoC Fuse value */
-#define BSEL_SOC_FUSE_MASK		0x7
-/* FSB 133MHz */
-#define BSEL_SOC_FUSE_001		0x1
-/* FSB 100MHz */
-#define BSEL_SOC_FUSE_101		0x5
-/* FSB 83MHz */
-#define BSEL_SOC_FUSE_111		0x7
-
 #endif /* _ASM_X86_INTEL_MID_H */
diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
index a3760ca796aa..5b77bbc28f96 100644
--- a/arch/x86/include/asm/kexec.h
+++ b/arch/x86/include/asm/kexec.h
@@ -200,9 +200,6 @@ int arch_kexec_apply_relocations_add(struct purgatory_info *pi,
 				     const Elf_Shdr *symtab);
 #define arch_kexec_apply_relocations_add arch_kexec_apply_relocations_add
 
-void *arch_kexec_kernel_image_load(struct kimage *image);
-#define arch_kexec_kernel_image_load arch_kexec_kernel_image_load
-
 int arch_kimage_file_post_load_cleanup(struct kimage *image);
 #define arch_kimage_file_post_load_cleanup arch_kimage_file_post_load_cleanup
 #endif
diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
index dd9b8118f784..0953aa32a324 100644
--- a/arch/x86/include/asm/linkage.h
+++ b/arch/x86/include/asm/linkage.h
@@ -99,7 +99,7 @@
 
 /* SYM_TYPED_FUNC_START -- use for indirectly called globals, w/ CFI type */
 #define SYM_TYPED_FUNC_START(name)				\
-	SYM_TYPED_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)	\
+	SYM_TYPED_START(name, SYM_L_GLOBAL, SYM_F_ALIGN)	\
 	ENDBR
 
 /* SYM_FUNC_START -- use for global functions */
diff --git a/arch/x86/include/asm/mem_encrypt.h b/arch/x86/include/asm/mem_encrypt.h
index 72ca90552b6a..b7126701574c 100644
--- a/arch/x86/include/asm/mem_encrypt.h
+++ b/arch/x86/include/asm/mem_encrypt.h
@@ -56,6 +56,7 @@ void __init sev_es_init_vc_handling(void);
 #else	/* !CONFIG_AMD_MEM_ENCRYPT */
 
 #define sme_me_mask	0ULL
+#define sev_status	0ULL
 
 static inline void __init sme_early_encrypt(resource_size_t paddr,
 					    unsigned long size) { }
diff --git a/arch/x86/include/asm/mmu.h b/arch/x86/include/asm/mmu.h
index 5d7494631ea9..0da5c227f490 100644
--- a/arch/x86/include/asm/mmu.h
+++ b/arch/x86/include/asm/mmu.h
@@ -9,9 +9,13 @@
 #include <linux/bits.h>
 
 /* Uprobes on this MM assume 32-bit code */
-#define MM_CONTEXT_UPROBE_IA32	BIT(0)
+#define MM_CONTEXT_UPROBE_IA32		0
 /* vsyscall page is accessible on this MM */
-#define MM_CONTEXT_HAS_VSYSCALL	BIT(1)
+#define MM_CONTEXT_HAS_VSYSCALL		1
+/* Do not allow changing LAM mode */
+#define MM_CONTEXT_LOCK_LAM		2
+/* Allow LAM and SVA coexisting */
+#define MM_CONTEXT_FORCE_TAGGED_SVA	3
 
 /*
  * x86 has arch-specific MMU state beyond what lives in mm_struct.
@@ -39,7 +43,15 @@ typedef struct {
 #endif
 
 #ifdef CONFIG_X86_64
-	unsigned short flags;
+	unsigned long flags;
+#endif
+
+#ifdef CONFIG_ADDRESS_MASKING
+	/* Active LAM mode:  X86_CR3_LAM_U48 or X86_CR3_LAM_U57 or 0 (disabled) */
+	unsigned long lam_cr3_mask;
+
+	/* Significant bits of the virtual address. Excludes tag bits. */
+	u64 untag_mask;
 #endif
 
 	struct mutex lock;
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index e01aa74a6de7..1d29dc791f5a 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -16,13 +16,6 @@
 
 extern atomic64_t last_mm_ctx_id;
 
-#ifndef CONFIG_PARAVIRT_XXL
-static inline void paravirt_activate_mm(struct mm_struct *prev,
-					struct mm_struct *next)
-{
-}
-#endif	/* !CONFIG_PARAVIRT_XXL */
-
 #ifdef CONFIG_PERF_EVENTS
 DECLARE_STATIC_KEY_FALSE(rdpmc_never_available_key);
 DECLARE_STATIC_KEY_FALSE(rdpmc_always_available_key);
@@ -92,6 +85,51 @@ static inline void switch_ldt(struct mm_struct *prev, struct mm_struct *next)
 }
 #endif
 
+#ifdef CONFIG_ADDRESS_MASKING
+static inline unsigned long mm_lam_cr3_mask(struct mm_struct *mm)
+{
+	return mm->context.lam_cr3_mask;
+}
+
+static inline void dup_lam(struct mm_struct *oldmm, struct mm_struct *mm)
+{
+	mm->context.lam_cr3_mask = oldmm->context.lam_cr3_mask;
+	mm->context.untag_mask = oldmm->context.untag_mask;
+}
+
+#define mm_untag_mask mm_untag_mask
+static inline unsigned long mm_untag_mask(struct mm_struct *mm)
+{
+	return mm->context.untag_mask;
+}
+
+static inline void mm_reset_untag_mask(struct mm_struct *mm)
+{
+	mm->context.untag_mask = -1UL;
+}
+
+#define arch_pgtable_dma_compat arch_pgtable_dma_compat
+static inline bool arch_pgtable_dma_compat(struct mm_struct *mm)
+{
+	return !mm_lam_cr3_mask(mm) ||
+		test_bit(MM_CONTEXT_FORCE_TAGGED_SVA, &mm->context.flags);
+}
+#else
+
+static inline unsigned long mm_lam_cr3_mask(struct mm_struct *mm)
+{
+	return 0;
+}
+
+static inline void dup_lam(struct mm_struct *oldmm, struct mm_struct *mm)
+{
+}
+
+static inline void mm_reset_untag_mask(struct mm_struct *mm)
+{
+}
+#endif
+
 #define enter_lazy_tlb enter_lazy_tlb
 extern void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk);
 
@@ -116,6 +154,7 @@ static inline int init_new_context(struct task_struct *tsk,
 		mm->context.execute_only_pkey = -1;
 	}
 #endif
+	mm_reset_untag_mask(mm);
 	init_new_context_ldt(mm);
 	return 0;
 }
@@ -135,7 +174,7 @@ extern void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 
 #define activate_mm(prev, next)			\
 do {						\
-	paravirt_activate_mm((prev), (next));	\
+	paravirt_enter_mmap(next);		\
 	switch_mm((prev), (next), NULL);	\
 } while (0);
 
@@ -168,7 +207,8 @@ static inline void arch_dup_pkeys(struct mm_struct *oldmm,
 static inline int arch_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm)
 {
 	arch_dup_pkeys(oldmm, mm);
-	paravirt_arch_dup_mmap(oldmm, mm);
+	paravirt_enter_mmap(mm);
+	dup_lam(oldmm, mm);
 	return ldt_dup_context(oldmm, mm);
 }
 
@@ -182,7 +222,7 @@ static inline void arch_exit_mmap(struct mm_struct *mm)
 static inline bool is_64bit_mm(struct mm_struct *mm)
 {
 	return	!IS_ENABLED(CONFIG_IA32_EMULATION) ||
-		!(mm->context.flags & MM_CONTEXT_UPROBE_IA32);
+		!test_bit(MM_CONTEXT_UPROBE_IA32, &mm->context.flags);
 }
 #else
 static inline bool is_64bit_mm(struct mm_struct *mm)
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 4c4c0ec3b62e..49bb4f2bd300 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -11,6 +11,18 @@
 #include <asm/paravirt.h>
 #include <asm/mshyperv.h>
 
+/*
+ * Hyper-V always provides a single IO-APIC at this MMIO address.
+ * Ideally, the value should be looked up in ACPI tables, but it
+ * is needed for mapping the IO-APIC early in boot on Confidential
+ * VMs, before ACPI functions can be used.
+ */
+#define HV_IOAPIC_BASE_ADDRESS 0xfec00000
+
+#define HV_VTL_NORMAL 0x0
+#define HV_VTL_SECURE 0x1
+#define HV_VTL_MGMT   0x2
+
 union hv_ghcb;
 
 DECLARE_STATIC_KEY_FALSE(isolation_type_snp);
@@ -21,6 +33,11 @@ typedef int (*hyperv_fill_flush_list_func)(
 
 void hyperv_vector_handler(struct pt_regs *regs);
 
+static inline unsigned char hv_get_nmi_reason(void)
+{
+	return 0;
+}
+
 #if IS_ENABLED(CONFIG_HYPERV)
 extern int hyperv_init_cpuhp;
 
@@ -206,18 +223,19 @@ struct irq_domain *hv_create_pci_msi_domain(void);
 int hv_map_ioapic_interrupt(int ioapic_id, bool level, int vcpu, int vector,
 		struct hv_interrupt_entry *entry);
 int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry);
-int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible);
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 void hv_ghcb_msr_write(u64 msr, u64 value);
 void hv_ghcb_msr_read(u64 msr, u64 *value);
 bool hv_ghcb_negotiate_protocol(void);
-void hv_ghcb_terminate(unsigned int set, unsigned int reason);
+void __noreturn hv_ghcb_terminate(unsigned int set, unsigned int reason);
+void hv_vtom_init(void);
 #else
 static inline void hv_ghcb_msr_write(u64 msr, u64 value) {}
 static inline void hv_ghcb_msr_read(u64 msr, u64 *value) {}
 static inline bool hv_ghcb_negotiate_protocol(void) { return false; }
 static inline void hv_ghcb_terminate(unsigned int set, unsigned int reason) {}
+static inline void hv_vtom_init(void) {}
 #endif
 
 extern bool hv_isolation_type_snp(void);
@@ -259,14 +277,15 @@ static inline void hv_set_register(unsigned int reg, u64 value) { }
 static inline u64 hv_get_register(unsigned int reg) { return 0; }
 static inline void hv_set_non_nested_register(unsigned int reg, u64 value) { }
 static inline u64 hv_get_non_nested_register(unsigned int reg) { return 0; }
-static inline int hv_set_mem_host_visibility(unsigned long addr, int numpages,
-					     bool visible)
-{
-	return -1;
-}
 #endif /* CONFIG_HYPERV */
 
 
+#ifdef CONFIG_HYPERV_VTL_MODE
+void __init hv_vtl_init_platform(void);
+#else
+static inline void __init hv_vtl_init_platform(void) {}
+#endif
+
 #include <asm-generic/mshyperv.h>
 
 #endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index ad35355ee43e..3aedae61af4f 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -206,6 +206,8 @@
 
 /* Abbreviated from Intel SDM name IA32_INTEGRITY_CAPABILITIES */
 #define MSR_INTEGRITY_CAPS			0x000002d9
+#define MSR_INTEGRITY_CAPS_ARRAY_BIST_BIT      2
+#define MSR_INTEGRITY_CAPS_ARRAY_BIST          BIT(MSR_INTEGRITY_CAPS_ARRAY_BIST_BIT)
 #define MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT	4
 #define MSR_INTEGRITY_CAPS_PERIODIC_BIST	BIT(MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT)
 
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index 3ef70e54a858..edb2b0cb8efe 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -194,9 +194,9 @@
  * builds.
  */
 .macro ANNOTATE_RETPOLINE_SAFE
-	.Lannotate_\@:
+.Lhere_\@:
 	.pushsection .discard.retpoline_safe
-	_ASM_PTR .Lannotate_\@
+	.long .Lhere_\@ - .
 	.popsection
 .endm
 
@@ -210,8 +210,8 @@
  * Abuse ANNOTATE_RETPOLINE_SAFE on a NOP to indicate UNRET_END, should
  * eventually turn into it's own annotation.
  */
-.macro ANNOTATE_UNRET_END
-#ifdef CONFIG_DEBUG_ENTRY
+.macro VALIDATE_UNRET_END
+#if defined(CONFIG_NOINSTR_VALIDATION) && defined(CONFIG_CPU_UNRET_ENTRY)
 	ANNOTATE_RETPOLINE_SAFE
 	nop
 #endif
@@ -286,7 +286,7 @@
 .macro UNTRAIN_RET
 #if defined(CONFIG_CPU_UNRET_ENTRY) || defined(CONFIG_CPU_IBPB_ENTRY) || \
 	defined(CONFIG_CALL_DEPTH_TRACKING)
-	ANNOTATE_UNRET_END
+	VALIDATE_UNRET_END
 	ALTERNATIVE_3 "",						\
 		      CALL_ZEN_UNTRAIN_RET, X86_FEATURE_UNRET,		\
 		      "call entry_ibpb", X86_FEATURE_ENTRY_IBPB,	\
@@ -297,7 +297,7 @@
 .macro UNTRAIN_RET_FROM_CALL
 #if defined(CONFIG_CPU_UNRET_ENTRY) || defined(CONFIG_CPU_IBPB_ENTRY) || \
 	defined(CONFIG_CALL_DEPTH_TRACKING)
-	ANNOTATE_UNRET_END
+	VALIDATE_UNRET_END
 	ALTERNATIVE_3 "",						\
 		      CALL_ZEN_UNTRAIN_RET, X86_FEATURE_UNRET,		\
 		      "call entry_ibpb", X86_FEATURE_ENTRY_IBPB,	\
@@ -318,7 +318,7 @@
 #define ANNOTATE_RETPOLINE_SAFE					\
 	"999:\n\t"						\
 	".pushsection .discard.retpoline_safe\n\t"		\
-	_ASM_PTR " 999b\n\t"					\
+	".long 999b - .\n\t"					\
 	".popsection\n\t"
 
 typedef u8 retpoline_thunk_t[RETPOLINE_THUNK_SIZE];
diff --git a/arch/x86/include/asm/orc_types.h b/arch/x86/include/asm/orc_types.h
index 1343a62106de..46d7e06763c9 100644
--- a/arch/x86/include/asm/orc_types.h
+++ b/arch/x86/include/asm/orc_types.h
@@ -39,6 +39,12 @@
 #define ORC_REG_SP_INDIRECT		9
 #define ORC_REG_MAX			15
 
+#define ORC_TYPE_UNDEFINED		0
+#define ORC_TYPE_END_OF_STACK		1
+#define ORC_TYPE_CALL			2
+#define ORC_TYPE_REGS			3
+#define ORC_TYPE_REGS_PARTIAL		4
+
 #ifndef __ASSEMBLY__
 #include <asm/byteorder.h>
 
@@ -56,16 +62,14 @@ struct orc_entry {
 #if defined(__LITTLE_ENDIAN_BITFIELD)
 	unsigned	sp_reg:4;
 	unsigned	bp_reg:4;
-	unsigned	type:2;
+	unsigned	type:3;
 	unsigned	signal:1;
-	unsigned	end:1;
 #elif defined(__BIG_ENDIAN_BITFIELD)
 	unsigned	bp_reg:4;
 	unsigned	sp_reg:4;
 	unsigned	unused:4;
-	unsigned	end:1;
 	unsigned	signal:1;
-	unsigned	type:2;
+	unsigned	type:3;
 #endif
 } __packed;
 
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index e9e2c3ba5923..06ef25411d62 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -49,7 +49,7 @@
 
 #define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
 
-/* See Documentation/x86/x86_64/mm.rst for a description of the memory map. */
+/* See Documentation/arch/x86/x86_64/mm.rst for a description of the memory map. */
 
 #define __PHYSICAL_MASK_SHIFT	52
 
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index cf40e813b3d7..b49778664d2b 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -334,16 +334,9 @@ static inline void tss_update_io_bitmap(void)
 }
 #endif
 
-static inline void paravirt_activate_mm(struct mm_struct *prev,
-					struct mm_struct *next)
+static inline void paravirt_enter_mmap(struct mm_struct *next)
 {
-	PVOP_VCALL2(mmu.activate_mm, prev, next);
-}
-
-static inline void paravirt_arch_dup_mmap(struct mm_struct *oldmm,
-					  struct mm_struct *mm)
-{
-	PVOP_VCALL2(mmu.dup_mmap, oldmm, mm);
+	PVOP_VCALL1(mmu.enter_mmap, next);
 }
 
 static inline int paravirt_pgd_alloc(struct mm_struct *mm)
@@ -789,8 +782,7 @@ extern void default_banner(void);
 
 #ifndef __ASSEMBLY__
 #ifndef CONFIG_PARAVIRT_XXL
-static inline void paravirt_arch_dup_mmap(struct mm_struct *oldmm,
-					  struct mm_struct *mm)
+static inline void paravirt_enter_mmap(struct mm_struct *mm)
 {
 }
 #endif
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 8c1da419260f..4acbcddddc29 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -164,11 +164,8 @@ struct pv_mmu_ops {
 	unsigned long (*read_cr3)(void);
 	void (*write_cr3)(unsigned long);
 
-	/* Hooks for intercepting the creation/use of an mm_struct. */
-	void (*activate_mm)(struct mm_struct *prev,
-			    struct mm_struct *next);
-	void (*dup_mmap)(struct mm_struct *oldmm,
-			 struct mm_struct *mm);
+	/* Hook for intercepting the creation/use of an mm_struct. */
+	void (*enter_mmap)(struct mm_struct *mm);
 
 	/* Hooks for allocating and freeing a pagetable top-level */
 	int  (*pgd_alloc)(struct mm_struct *mm);
@@ -562,8 +559,14 @@ void paravirt_flush_lazy_mmu(void);
 
 void _paravirt_nop(void);
 void paravirt_BUG(void);
-u64 _paravirt_ident_64(u64);
 unsigned long paravirt_ret0(void);
+#ifdef CONFIG_PARAVIRT_XXL
+u64 _paravirt_ident_64(u64);
+unsigned long pv_native_save_fl(void);
+void pv_native_irq_disable(void);
+void pv_native_irq_enable(void);
+unsigned long pv_native_read_cr2(void);
+#endif
 
 #define paravirt_nop	((void *)_paravirt_nop)
 
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 7425f32e5293..15ae4d6ba476 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -1097,7 +1097,7 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm,
 	clear_bit(_PAGE_BIT_RW, (unsigned long *)&ptep->pte);
 }
 
-#define flush_tlb_fix_spurious_fault(vma, address) do { } while (0)
+#define flush_tlb_fix_spurious_fault(vma, address, ptep) do { } while (0)
 
 #define mk_pmd(page, pgprot)   pfn_pmd(page_to_pfn(page), (pgprot))
 
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index 38bf837e3554..38b54b992f32 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -104,7 +104,7 @@ extern unsigned int ptrs_per_p4d;
 #define PGDIR_MASK	(~(PGDIR_SIZE - 1))
 
 /*
- * See Documentation/x86/x86_64/mm.rst for a description of the memory map.
+ * See Documentation/arch/x86/x86_64/mm.rst for a description of the memory map.
  *
  * Be very careful vs. KASLR when changing anything here. The KASLR address
  * range must not overlap with anything except the KASAN shadow area, which
diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
index a7f3d9100adb..d8cccadc83a6 100644
--- a/arch/x86/include/asm/processor-flags.h
+++ b/arch/x86/include/asm/processor-flags.h
@@ -28,6 +28,8 @@
  * On systems with SME, one bit (in a variable position!) is stolen to indicate
  * that the top-level paging structure is encrypted.
  *
+ * On systemms with LAM, bits 61 and 62 are used to indicate LAM mode.
+ *
  * All of the remaining bits indicate the physical address of the top-level
  * paging structure.
  *
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 8d73004e4cac..a1e4fa58b357 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -647,7 +647,11 @@ static inline void spin_lock_prefetch(const void *x)
 #define KSTK_ESP(task)		(task_pt_regs(task)->sp)
 
 #else
-#define INIT_THREAD { }
+extern unsigned long __end_init_task[];
+
+#define INIT_THREAD {							    \
+	.sp	= (unsigned long)&__end_init_task - sizeof(struct pt_regs), \
+}
 
 extern unsigned long KSTK_ESP(struct task_struct *task);
 
diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index a336feef0af1..f6a1737c77be 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -59,7 +59,6 @@ extern struct real_mode_header *real_mode_header;
 extern unsigned char real_mode_blob_end[];
 
 extern unsigned long initial_code;
-extern unsigned long initial_gs;
 extern unsigned long initial_stack;
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 extern unsigned long initial_vc_handler;
diff --git a/arch/x86/include/asm/reboot.h b/arch/x86/include/asm/reboot.h
index bc5b4d788c08..9177b4354c3f 100644
--- a/arch/x86/include/asm/reboot.h
+++ b/arch/x86/include/asm/reboot.h
@@ -28,7 +28,6 @@ void __noreturn machine_real_restart(unsigned int type);
 void cpu_emergency_disable_virtualization(void);
 
 typedef void (*nmi_shootdown_cb)(int, struct pt_regs*);
-void nmi_panic_self_stop(struct pt_regs *regs);
 void nmi_shootdown_cpus(nmi_shootdown_cb callback);
 void run_crash_ipi_callback(struct pt_regs *regs);
 
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index f37cbff7354c..f3495623ac99 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -125,11 +125,11 @@ void clear_bss(void);
 
 #ifdef __i386__
 
-asmlinkage void __init i386_start_kernel(void);
+asmlinkage void __init __noreturn i386_start_kernel(void);
 
 #else
-asmlinkage void __init x86_64_start_kernel(char *real_mode);
-asmlinkage void __init x86_64_start_reservations(char *real_mode_data);
+asmlinkage void __init __noreturn x86_64_start_kernel(char *real_mode);
+asmlinkage void __init __noreturn x86_64_start_reservations(char *real_mode_data);
 
 #endif /* __i386__ */
 #endif /* _SETUP */
diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
index b63be696b776..0759af9b1acf 100644
--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -128,10 +128,6 @@ struct snp_psc_desc {
 	struct psc_entry entries[VMGEXIT_PSC_MAX_ENTRY];
 } __packed;
 
-/* Guest message request error codes */
-#define SNP_GUEST_REQ_INVALID_LEN	BIT_ULL(32)
-#define SNP_GUEST_REQ_ERR_BUSY		BIT_ULL(33)
-
 #define GHCB_MSR_TERM_REQ		0x100
 #define GHCB_MSR_TERM_REASON_SET_POS	12
 #define GHCB_MSR_TERM_REASON_SET_MASK	0xf
diff --git a/arch/x86/include/asm/sev.h b/arch/x86/include/asm/sev.h
index ebc271bb6d8e..13dc2a9d23c1 100644
--- a/arch/x86/include/asm/sev.h
+++ b/arch/x86/include/asm/sev.h
@@ -9,6 +9,8 @@
 #define __ASM_ENCRYPTED_STATE_H
 
 #include <linux/types.h>
+#include <linux/sev-guest.h>
+
 #include <asm/insn.h>
 #include <asm/sev-common.h>
 #include <asm/bootparam.h>
@@ -185,6 +187,9 @@ static inline int pvalidate(unsigned long vaddr, bool rmp_psize, bool validate)
 
 	return rc;
 }
+
+struct snp_guest_request_ioctl;
+
 void setup_ghcb(void);
 void __init early_snp_set_memory_private(unsigned long vaddr, unsigned long paddr,
 					 unsigned int npages);
@@ -196,7 +201,7 @@ void snp_set_memory_private(unsigned long vaddr, unsigned int npages);
 void snp_set_wakeup_secondary_cpu(void);
 bool snp_init(struct boot_params *bp);
 void __init __noreturn snp_abort(void);
-int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, unsigned long *fw_err);
+int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, struct snp_guest_request_ioctl *rio);
 #else
 static inline void sev_es_ist_enter(struct pt_regs *regs) { }
 static inline void sev_es_ist_exit(void) { }
@@ -216,8 +221,7 @@ static inline void snp_set_memory_private(unsigned long vaddr, unsigned int npag
 static inline void snp_set_wakeup_secondary_cpu(void) { }
 static inline bool snp_init(struct boot_params *bp) { return false; }
 static inline void snp_abort(void) { }
-static inline int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input,
-					  unsigned long *fw_err)
+static inline int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, struct snp_guest_request_ioctl *rio)
 {
 	return -ENOTTY;
 }
diff --git a/arch/x86/include/asm/shared/tdx.h b/arch/x86/include/asm/shared/tdx.h
index 4a03993e0785..2631e01f6e0f 100644
--- a/arch/x86/include/asm/shared/tdx.h
+++ b/arch/x86/include/asm/shared/tdx.h
@@ -7,8 +7,6 @@
 
 #define TDX_HYPERCALL_STANDARD  0
 
-#define TDX_HCALL_HAS_OUTPUT	BIT(0)
-
 #define TDX_CPUID_LEAF_ID	0x21
 #define TDX_IDENT		"IntelTDX    "
 
@@ -36,7 +34,8 @@ struct tdx_hypercall_args {
 };
 
 /* Used to request services from the VMM */
-u64 __tdx_hypercall(struct tdx_hypercall_args *args, unsigned long flags);
+u64 __tdx_hypercall(struct tdx_hypercall_args *args);
+u64 __tdx_hypercall_ret(struct tdx_hypercall_args *args);
 
 /* Called from __tdx_hypercall() for unrecoverable failure */
 void __tdx_hypercall_failed(void);
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index f9757123d8fa..4e91054c84be 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -93,9 +93,10 @@ static inline void __cpu_die(unsigned int cpu)
 	smp_ops.cpu_die(cpu);
 }
 
-static inline void play_dead(void)
+static inline void __noreturn play_dead(void)
 {
 	smp_ops.play_dead();
+	BUG();
 }
 
 static inline void arch_smp_send_reschedule(int cpu)
@@ -124,7 +125,7 @@ int native_cpu_up(unsigned int cpunum, struct task_struct *tidle);
 int native_cpu_disable(void);
 int common_cpu_die(unsigned int cpu);
 void native_cpu_die(unsigned int cpu);
-void hlt_play_dead(void);
+void __noreturn hlt_play_dead(void);
 void native_play_dead(void);
 void play_dead_common(void);
 void wbinvd_on_cpu(int cpu);
@@ -199,5 +200,8 @@ extern void nmi_selftest(void);
 #define nmi_selftest() do { } while (0)
 #endif
 
-#endif /* __ASSEMBLY__ */
+extern unsigned int smpboot_control;
+
+#endif /* !__ASSEMBLY__ */
+
 #endif /* _ASM_X86_SMP_H */
diff --git a/arch/x86/include/asm/string_64.h b/arch/x86/include/asm/string_64.h
index c1e14cee0722..857d364b9888 100644
--- a/arch/x86/include/asm/string_64.h
+++ b/arch/x86/include/asm/string_64.h
@@ -15,24 +15,18 @@
 #endif
 
 #define __HAVE_ARCH_MEMCPY 1
-#if defined(__SANITIZE_MEMORY__) && defined(__NO_FORTIFY)
-#undef memcpy
-#define memcpy __msan_memcpy
-#else
 extern void *memcpy(void *to, const void *from, size_t len);
-#endif
 extern void *__memcpy(void *to, const void *from, size_t len);
 
 #define __HAVE_ARCH_MEMSET
-#if defined(__SANITIZE_MEMORY__) && defined(__NO_FORTIFY)
-extern void *__msan_memset(void *s, int c, size_t n);
-#undef memset
-#define memset __msan_memset
-#else
 void *memset(void *s, int c, size_t n);
-#endif
 void *__memset(void *s, int c, size_t n);
 
+/*
+ * KMSAN needs to instrument as much code as possible. Use C versions of
+ * memsetXX() from lib/string.c under KMSAN.
+ */
+#if !defined(CONFIG_KMSAN)
 #define __HAVE_ARCH_MEMSET16
 static inline void *memset16(uint16_t *s, uint16_t v, size_t n)
 {
@@ -68,15 +62,10 @@ static inline void *memset64(uint64_t *s, uint64_t v, size_t n)
 		     : "memory");
 	return s;
 }
+#endif
 
 #define __HAVE_ARCH_MEMMOVE
-#if defined(__SANITIZE_MEMORY__) && defined(__NO_FORTIFY)
-#undef memmove
-void *__msan_memmove(void *dest, const void *src, size_t len);
-#define memmove __msan_memmove
-#else
 void *memmove(void *dest, const void *src, size_t count);
-#endif
 void *__memmove(void *dest, const void *src, size_t count);
 
 int memcmp(const void *cs, const void *ct, size_t count);
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index cda3118f3b27..75bfaa421030 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_X86_TLBFLUSH_H
 #define _ASM_X86_TLBFLUSH_H
 
-#include <linux/mm.h>
+#include <linux/mm_types.h>
 #include <linux/sched.h>
 
 #include <asm/processor.h>
@@ -12,6 +12,7 @@
 #include <asm/invpcid.h>
 #include <asm/pti.h>
 #include <asm/processor-flags.h>
+#include <asm/pgtable.h>
 
 void __flush_tlb_all(void);
 
@@ -53,6 +54,15 @@ static inline void cr4_clear_bits(unsigned long mask)
 	local_irq_restore(flags);
 }
 
+#ifdef CONFIG_ADDRESS_MASKING
+DECLARE_PER_CPU(u64, tlbstate_untag_mask);
+
+static inline u64 current_untag_mask(void)
+{
+	return this_cpu_read(tlbstate_untag_mask);
+}
+#endif
+
 #ifndef MODULE
 /*
  * 6 because 6 should be plenty and struct tlb_state will fit in two cache
@@ -101,6 +111,16 @@ struct tlb_state {
 	 */
 	bool invalidate_other;
 
+#ifdef CONFIG_ADDRESS_MASKING
+	/*
+	 * Active LAM mode.
+	 *
+	 * X86_CR3_LAM_U57/U48 shifted right by X86_CR3_LAM_U57_BIT or 0 if LAM
+	 * disabled.
+	 */
+	u8 lam;
+#endif
+
 	/*
 	 * Mask that contains TLB_NR_DYN_ASIDS+1 bits to indicate
 	 * the corresponding user PCID needs a flush next time we
@@ -357,6 +377,32 @@ static inline bool huge_pmd_needs_flush(pmd_t oldpmd, pmd_t newpmd)
 }
 #define huge_pmd_needs_flush huge_pmd_needs_flush
 
+#ifdef CONFIG_ADDRESS_MASKING
+static inline  u64 tlbstate_lam_cr3_mask(void)
+{
+	u64 lam = this_cpu_read(cpu_tlbstate.lam);
+
+	return lam << X86_CR3_LAM_U57_BIT;
+}
+
+static inline void set_tlbstate_lam_mode(struct mm_struct *mm)
+{
+	this_cpu_write(cpu_tlbstate.lam,
+		       mm->context.lam_cr3_mask >> X86_CR3_LAM_U57_BIT);
+	this_cpu_write(tlbstate_untag_mask, mm->context.untag_mask);
+}
+
+#else
+
+static inline u64 tlbstate_lam_cr3_mask(void)
+{
+	return 0;
+}
+
+static inline void set_tlbstate_lam_mode(struct mm_struct *mm)
+{
+}
+#endif
 #endif /* !MODULE */
 
 static inline void __native_tlb_flush_global(unsigned long cr4)
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 1cc756eafa44..457e814712af 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -7,11 +7,14 @@
 #include <linux/compiler.h>
 #include <linux/instrumented.h>
 #include <linux/kasan-checks.h>
+#include <linux/mm_types.h>
 #include <linux/string.h>
+#include <linux/mmap_lock.h>
 #include <asm/asm.h>
 #include <asm/page.h>
 #include <asm/smap.h>
 #include <asm/extable.h>
+#include <asm/tlbflush.h>
 
 #ifdef CONFIG_DEBUG_ATOMIC_SLEEP
 static inline bool pagefault_disabled(void);
@@ -21,6 +24,57 @@ static inline bool pagefault_disabled(void);
 # define WARN_ON_IN_IRQ()
 #endif
 
+#ifdef CONFIG_ADDRESS_MASKING
+/*
+ * Mask out tag bits from the address.
+ *
+ * Magic with the 'sign' allows to untag userspace pointer without any branches
+ * while leaving kernel addresses intact.
+ */
+static inline unsigned long __untagged_addr(unsigned long addr)
+{
+	long sign;
+
+	/*
+	 * Refer tlbstate_untag_mask directly to avoid RIP-relative relocation
+	 * in alternative instructions. The relocation gets wrong when gets
+	 * copied to the target place.
+	 */
+	asm (ALTERNATIVE("",
+			 "sar $63, %[sign]\n\t" /* user_ptr ? 0 : -1UL */
+			 "or %%gs:tlbstate_untag_mask, %[sign]\n\t"
+			 "and %[sign], %[addr]\n\t", X86_FEATURE_LAM)
+	     : [addr] "+r" (addr), [sign] "=r" (sign)
+	     : "m" (tlbstate_untag_mask), "[sign]" (addr));
+
+	return addr;
+}
+
+#define untagged_addr(addr)	({					\
+	unsigned long __addr = (__force unsigned long)(addr);		\
+	(__force __typeof__(addr))__untagged_addr(__addr);		\
+})
+
+static inline unsigned long __untagged_addr_remote(struct mm_struct *mm,
+						   unsigned long addr)
+{
+	long sign = addr >> 63;
+
+	mmap_assert_locked(mm);
+	addr &= (mm)->context.untag_mask | sign;
+
+	return addr;
+}
+
+#define untagged_addr_remote(mm, addr)	({				\
+	unsigned long __addr = (__force unsigned long)(addr);		\
+	(__force __typeof__(addr))__untagged_addr_remote(mm, __addr);	\
+})
+
+#else
+#define untagged_addr(addr)	(addr)
+#endif
+
 /**
  * access_ok - Checks if a user space pointer is valid
  * @addr: User space pointer to start of block to check
@@ -38,10 +92,10 @@ static inline bool pagefault_disabled(void);
  * Return: true (nonzero) if the memory block may be valid, false (zero)
  * if it is definitely invalid.
  */
-#define access_ok(addr, size)					\
+#define access_ok(addr, size)						\
 ({									\
 	WARN_ON_IN_IRQ();						\
-	likely(__access_ok(addr, size));				\
+	likely(__access_ok(untagged_addr(addr), size));			\
 })
 
 #include <asm-generic/access_ok.h>
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index d13d71af5cf6..c972bd21aa23 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -18,32 +18,26 @@
 
 /* Handles exceptions in both to and from, but doesn't do access_ok */
 __must_check unsigned long
-copy_user_enhanced_fast_string(void *to, const void *from, unsigned len);
-__must_check unsigned long
-copy_user_generic_string(void *to, const void *from, unsigned len);
-__must_check unsigned long
-copy_user_generic_unrolled(void *to, const void *from, unsigned len);
+rep_movs_alternative(void *to, const void *from, unsigned len);
 
 static __always_inline __must_check unsigned long
-copy_user_generic(void *to, const void *from, unsigned len)
+copy_user_generic(void *to, const void *from, unsigned long len)
 {
-	unsigned ret;
-
+	stac();
 	/*
-	 * If CPU has ERMS feature, use copy_user_enhanced_fast_string.
-	 * Otherwise, if CPU has rep_good feature, use copy_user_generic_string.
-	 * Otherwise, use copy_user_generic_unrolled.
+	 * If CPU has FSRM feature, use 'rep movs'.
+	 * Otherwise, use rep_movs_alternative.
 	 */
-	alternative_call_2(copy_user_generic_unrolled,
-			 copy_user_generic_string,
-			 X86_FEATURE_REP_GOOD,
-			 copy_user_enhanced_fast_string,
-			 X86_FEATURE_ERMS,
-			 ASM_OUTPUT2("=a" (ret), "=D" (to), "=S" (from),
-				     "=d" (len)),
-			 "1" (to), "2" (from), "3" (len)
-			 : "memory", "rcx", "r8", "r9", "r10", "r11");
-	return ret;
+	asm volatile(
+		"1:\n\t"
+		ALTERNATIVE("rep movsb",
+			    "call rep_movs_alternative", ALT_NOT(X86_FEATURE_FSRM))
+		"2:\n"
+		_ASM_EXTABLE_UA(1b, 2b)
+		:"+c" (len), "+D" (to), "+S" (from), ASM_CALL_CONSTRAINT
+		: : "memory", "rax", "r8", "r9", "r10", "r11");
+	clac();
+	return len;
 }
 
 static __always_inline __must_check unsigned long
@@ -58,19 +52,19 @@ raw_copy_to_user(void __user *dst, const void *src, unsigned long size)
 	return copy_user_generic((__force void *)dst, src, size);
 }
 
-extern long __copy_user_nocache(void *dst, const void __user *src,
-				unsigned size, int zerorest);
-
+extern long __copy_user_nocache(void *dst, const void __user *src, unsigned size);
 extern long __copy_user_flushcache(void *dst, const void __user *src, unsigned size);
-extern void memcpy_page_flushcache(char *to, struct page *page, size_t offset,
-			   size_t len);
 
 static inline int
 __copy_from_user_inatomic_nocache(void *dst, const void __user *src,
 				  unsigned size)
 {
+	long ret;
 	kasan_check_write(dst, size);
-	return __copy_user_nocache(dst, src, size, 0);
+	stac();
+	ret = __copy_user_nocache(dst, src, size);
+	clac();
+	return ret;
 }
 
 static inline int
@@ -85,11 +79,7 @@ __copy_from_user_flushcache(void *dst, const void __user *src, unsigned size)
  */
 
 __must_check unsigned long
-clear_user_original(void __user *addr, unsigned long len);
-__must_check unsigned long
-clear_user_rep_good(void __user *addr, unsigned long len);
-__must_check unsigned long
-clear_user_erms(void __user *addr, unsigned long len);
+rep_stos_alternative(void __user *addr, unsigned long len);
 
 static __always_inline __must_check unsigned long __clear_user(void __user *addr, unsigned long size)
 {
@@ -102,16 +92,12 @@ static __always_inline __must_check unsigned long __clear_user(void __user *addr
 	 */
 	asm volatile(
 		"1:\n\t"
-		ALTERNATIVE_3("rep stosb",
-			      "call clear_user_erms",	  ALT_NOT(X86_FEATURE_FSRM),
-			      "call clear_user_rep_good", ALT_NOT(X86_FEATURE_ERMS),
-			      "call clear_user_original", ALT_NOT(X86_FEATURE_REP_GOOD))
+		ALTERNATIVE("rep stosb",
+			    "call rep_stos_alternative", ALT_NOT(X86_FEATURE_FSRS))
 		"2:\n"
 	       _ASM_EXTABLE_UA(1b, 2b)
 	       : "+c" (size), "+D" (addr), ASM_CALL_CONSTRAINT
-	       : "a" (0)
-		/* rep_good clobbers %rdx */
-	       : "rdx");
+	       : "a" (0));
 
 	clac();
 
diff --git a/arch/x86/include/asm/unwind_hints.h b/arch/x86/include/asm/unwind_hints.h
index e7c71750b309..01cb9692b160 100644
--- a/arch/x86/include/asm/unwind_hints.h
+++ b/arch/x86/include/asm/unwind_hints.h
@@ -7,12 +7,17 @@
 
 #ifdef __ASSEMBLY__
 
-.macro UNWIND_HINT_EMPTY
-	UNWIND_HINT type=UNWIND_HINT_TYPE_CALL end=1
+.macro UNWIND_HINT_END_OF_STACK
+	UNWIND_HINT type=UNWIND_HINT_TYPE_END_OF_STACK
+.endm
+
+.macro UNWIND_HINT_UNDEFINED
+	UNWIND_HINT type=UNWIND_HINT_TYPE_UNDEFINED
 .endm
 
 .macro UNWIND_HINT_ENTRY
-	UNWIND_HINT type=UNWIND_HINT_TYPE_ENTRY end=1
+	VALIDATE_UNRET_BEGIN
+	UNWIND_HINT_END_OF_STACK
 .endm
 
 .macro UNWIND_HINT_REGS base=%rsp offset=0 indirect=0 extra=1 partial=0 signal=1
@@ -52,6 +57,11 @@
 	UNWIND_HINT_REGS base=\base offset=\offset partial=1 signal=\signal
 .endm
 
+.macro UNWIND_HINT_IRET_ENTRY base=%rsp offset=0 signal=1
+	VALIDATE_UNRET_BEGIN
+	UNWIND_HINT_IRET_REGS base=\base offset=\offset signal=\signal
+.endm
+
 .macro UNWIND_HINT_FUNC
 	UNWIND_HINT sp_reg=ORC_REG_SP sp_offset=8 type=UNWIND_HINT_TYPE_FUNC
 .endm
@@ -67,7 +77,7 @@
 #else
 
 #define UNWIND_HINT_FUNC \
-	UNWIND_HINT(ORC_REG_SP, 8, UNWIND_HINT_TYPE_FUNC, 0, 0)
+	UNWIND_HINT(UNWIND_HINT_TYPE_FUNC, ORC_REG_SP, 8, 0)
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index c1c8c581759d..88085f369ff6 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -259,11 +259,15 @@ struct x86_legacy_features {
  *				VMMCALL under SEV-ES.  Needs to return 'false'
  *				if the checks fail.  Called from the #VC
  *				exception handler.
+ * @is_private_mmio:		For CoCo VMs, must map MMIO address as private.
+ *				Used when device is emulated by a paravisor
+ *				layer in the VM context.
  */
 struct x86_hyper_runtime {
 	void (*pin_vcpu)(int cpu);
 	void (*sev_es_hcall_prepare)(struct ghcb *ghcb, struct pt_regs *regs);
 	bool (*sev_es_hcall_finish)(struct ghcb *ghcb, struct pt_regs *regs);
+	bool (*is_private_mmio)(u64 addr);
 };
 
 /**
@@ -326,5 +330,7 @@ extern void x86_init_uint_noop(unsigned int unused);
 extern bool bool_x86_init_noop(void);
 extern void x86_op_int_noop(int cpu);
 extern bool x86_pnpbios_disabled(void);
+extern int set_rtc_noop(const struct timespec64 *now);
+extern void get_rtc_noop(struct timespec64 *now);
 
 #endif
diff --git a/arch/x86/include/uapi/asm/prctl.h b/arch/x86/include/uapi/asm/prctl.h
index 500b96e71f18..e8d7ebbca1a4 100644
--- a/arch/x86/include/uapi/asm/prctl.h
+++ b/arch/x86/include/uapi/asm/prctl.h
@@ -16,8 +16,16 @@
 #define ARCH_GET_XCOMP_GUEST_PERM	0x1024
 #define ARCH_REQ_XCOMP_GUEST_PERM	0x1025
 
+#define ARCH_XCOMP_TILECFG		17
+#define ARCH_XCOMP_TILEDATA		18
+
 #define ARCH_MAP_VDSO_X32		0x2001
 #define ARCH_MAP_VDSO_32		0x2002
 #define ARCH_MAP_VDSO_64		0x2003
 
+#define ARCH_GET_UNTAG_MASK		0x4001
+#define ARCH_ENABLE_TAGGED_ADDR		0x4002
+#define ARCH_GET_MAX_TAG_BITS		0x4003
+#define ARCH_FORCE_TAGGED_SVA		0x4004
+
 #endif /* _ASM_X86_PRCTL_H */
diff --git a/arch/x86/include/uapi/asm/processor-flags.h b/arch/x86/include/uapi/asm/processor-flags.h
index c47cc7f2feeb..d898432947ff 100644
--- a/arch/x86/include/uapi/asm/processor-flags.h
+++ b/arch/x86/include/uapi/asm/processor-flags.h
@@ -82,6 +82,10 @@
 #define X86_CR3_PCID_BITS	12
 #define X86_CR3_PCID_MASK	(_AC((1UL << X86_CR3_PCID_BITS) - 1, UL))
 
+#define X86_CR3_LAM_U57_BIT	61 /* Activate LAM for userspace, 62:57 bits masked */
+#define X86_CR3_LAM_U57		_BITULL(X86_CR3_LAM_U57_BIT)
+#define X86_CR3_LAM_U48_BIT	62 /* Activate LAM for userspace, 62:48 bits masked */
+#define X86_CR3_LAM_U48		_BITULL(X86_CR3_LAM_U48_BIT)
 #define X86_CR3_PCID_NOFLUSH_BIT 63 /* Preserve old PCID */
 #define X86_CR3_PCID_NOFLUSH    _BITULL(X86_CR3_PCID_NOFLUSH_BIT)
 
@@ -132,6 +136,8 @@
 #define X86_CR4_PKE		_BITUL(X86_CR4_PKE_BIT)
 #define X86_CR4_CET_BIT		23 /* enable Control-flow Enforcement Technology */
 #define X86_CR4_CET		_BITUL(X86_CR4_CET_BIT)
+#define X86_CR4_LAM_SUP_BIT	28 /* LAM for supervisor pointers */
+#define X86_CR4_LAM_SUP		_BITUL(X86_CR4_LAM_SUP_BIT)
 
 /*
  * x86-64 Task Priority Register, CR8
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 1c38174b5f01..21b542a6866c 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -146,7 +146,11 @@ static int __init acpi_parse_madt(struct acpi_table_header *table)
 
 		pr_debug("Local APIC address 0x%08x\n", madt->address);
 	}
-	if (madt->header.revision >= 5)
+
+	/* ACPI 6.3 and newer support the online capable bit. */
+	if (acpi_gbl_FADT.header.revision > 6 ||
+	    (acpi_gbl_FADT.header.revision == 6 &&
+	     acpi_gbl_FADT.minor_revision >= 3))
 		acpi_support_online_capable = true;
 
 	default_acpi_madt_oem_check(madt->header.oem_id,
@@ -193,7 +197,8 @@ static bool __init acpi_is_processor_usable(u32 lapic_flags)
 	if (lapic_flags & ACPI_MADT_ENABLED)
 		return true;
 
-	if (acpi_support_online_capable && (lapic_flags & ACPI_MADT_ONLINE_CAPABLE))
+	if (!acpi_support_online_capable ||
+	    (lapic_flags & ACPI_MADT_ONLINE_CAPABLE))
 		return true;
 
 	return false;
@@ -1853,13 +1858,18 @@ early_param("acpi_sci", setup_acpi_sci);
 
 int __acpi_acquire_global_lock(unsigned int *lock)
 {
-	unsigned int old, new;
+	unsigned int old, new, val;
 
 	old = READ_ONCE(*lock);
 	do {
-		new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+		val = (old >> 1) & 0x1;
+		new = (old & ~0x3) + 2 + val;
 	} while (!try_cmpxchg(lock, &old, new));
-	return ((new & 0x3) < 3) ? -1 : 0;
+
+	if (val)
+		return 0;
+
+	return -1;
 }
 
 int __acpi_release_global_lock(unsigned int *lock)
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 3b7f4cdbf2e0..1328c221af30 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -111,13 +111,26 @@ int x86_acpi_suspend_lowlevel(void)
 	saved_magic = 0x12345678;
 #else /* CONFIG_64BIT */
 #ifdef CONFIG_SMP
-	initial_stack = (unsigned long)temp_stack + sizeof(temp_stack);
-	early_gdt_descr.address =
-			(unsigned long)get_cpu_gdt_rw(smp_processor_id());
-	initial_gs = per_cpu_offset(smp_processor_id());
+	/*
+	 * As each CPU starts up, it will find its own stack pointer
+	 * from its current_task->thread.sp. Typically that will be
+	 * the idle thread for a newly-started AP, or even the boot
+	 * CPU which will find it set to &init_task in the static
+	 * per-cpu data.
+	 *
+	 * Make the resuming CPU use the temporary stack at startup
+	 * by setting current->thread.sp to point to that. The true
+	 * %rsp will be restored with the rest of the CPU context,
+	 * by do_suspend_lowlevel(). And unwinders don't care about
+	 * the abuse of ->thread.sp because it's a dead variable
+	 * while the thread is running on the CPU anyway; the true
+	 * value is in the actual %rsp register.
+	 */
+	current->thread.sp = (unsigned long)temp_stack + sizeof(temp_stack);
+	smpboot_control = smp_processor_id();
 #endif
 	initial_code = (unsigned long)wakeup_long64;
-       saved_magic = 0x123456789abcdef0L;
+	saved_magic = 0x123456789abcdef0L;
 #endif /* CONFIG_64BIT */
 
 	/*
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 20d9a604da7c..770557110051 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -422,10 +422,9 @@ static unsigned int reserve_eilvt_offset(int offset, unsigned int new)
 		if (vector && !eilvt_entry_is_changeable(vector, new))
 			/* may not change if vectors are different */
 			return rsvd;
-		rsvd = atomic_cmpxchg(&eilvt_offsets[offset], rsvd, new);
-	} while (rsvd != new);
+	} while (!atomic_try_cmpxchg(&eilvt_offsets[offset], &rsvd, new));
 
-	rsvd &= ~APIC_EILVT_MASKED;
+	rsvd = new & ~APIC_EILVT_MASKED;
 	if (rsvd && rsvd != vector)
 		pr_info("LVT offset %d assigned for vector 0x%02x\n",
 			offset, rsvd);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 1f83b052bb74..4241dc243aa8 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -66,6 +66,7 @@
 #include <asm/hw_irq.h>
 #include <asm/apic.h>
 #include <asm/pgtable.h>
+#include <asm/x86_init.h>
 
 #define	for_each_ioapic(idx)		\
 	for ((idx) = 0; (idx) < nr_ioapics; (idx)++)
@@ -2477,17 +2478,21 @@ static int io_apic_get_redir_entries(int ioapic)
 
 unsigned int arch_dynirq_lower_bound(unsigned int from)
 {
+	unsigned int ret;
+
 	/*
 	 * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use
 	 * gsi_top if ioapic_dynirq_base hasn't been initialized yet.
 	 */
-	if (!ioapic_initialized)
-		return gsi_top;
+	ret = ioapic_dynirq_base ? : gsi_top;
+
 	/*
-	 * For DT enabled machines ioapic_dynirq_base is irrelevant and not
-	 * updated. So simply return @from if ioapic_dynirq_base == 0.
+	 * For DT enabled machines ioapic_dynirq_base is irrelevant and
+	 * always 0. gsi_top can be 0 if there is no IO/APIC registered.
+	 * 0 is an invalid interrupt number for dynamic allocations. Return
+	 * @from instead.
 	 */
-	return ioapic_dynirq_base ? : from;
+	return ret ? : from;
 }
 
 #ifdef CONFIG_X86_32
@@ -2680,10 +2685,15 @@ static void io_apic_set_fixmap(enum fixed_addresses idx, phys_addr_t phys)
 	pgprot_t flags = FIXMAP_PAGE_NOCACHE;
 
 	/*
-	 * Ensure fixmaps for IOAPIC MMIO respect memory encryption pgprot
+	 * Ensure fixmaps for IO-APIC MMIO respect memory encryption pgprot
 	 * bits, just like normal ioremap():
 	 */
-	flags = pgprot_decrypted(flags);
+	if (cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT)) {
+		if (x86_platform.hyper.is_private_mmio(phys))
+			flags = pgprot_encrypted(flags);
+		else
+			flags = pgprot_decrypted(flags);
+	}
 
 	__set_fixmap(idx, phys, flags);
 }
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index e696e22d0531..b2b2b7f3e03f 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -9,11 +9,7 @@
 
 #include "local.h"
 
-struct cluster_mask {
-	unsigned int	clusterid;
-	int		node;
-	struct cpumask	mask;
-};
+#define apic_cluster(apicid) ((apicid) >> 4)
 
 /*
  * __x2apic_send_IPI_mask() possibly needs to read
@@ -23,8 +19,7 @@ struct cluster_mask {
 static u32 *x86_cpu_to_logical_apicid __read_mostly;
 
 static DEFINE_PER_CPU(cpumask_var_t, ipi_mask);
-static DEFINE_PER_CPU_READ_MOSTLY(struct cluster_mask *, cluster_masks);
-static struct cluster_mask *cluster_hotplug_mask;
+static DEFINE_PER_CPU_READ_MOSTLY(struct cpumask *, cluster_masks);
 
 static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
@@ -60,10 +55,10 @@ __x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 
 	/* Collapse cpus in a cluster so a single IPI per cluster is sent */
 	for_each_cpu(cpu, tmpmsk) {
-		struct cluster_mask *cmsk = per_cpu(cluster_masks, cpu);
+		struct cpumask *cmsk = per_cpu(cluster_masks, cpu);
 
 		dest = 0;
-		for_each_cpu_and(clustercpu, tmpmsk, &cmsk->mask)
+		for_each_cpu_and(clustercpu, tmpmsk, cmsk)
 			dest |= x86_cpu_to_logical_apicid[clustercpu];
 
 		if (!dest)
@@ -71,7 +66,7 @@ __x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 
 		__x2apic_send_IPI_dest(dest, vector, APIC_DEST_LOGICAL);
 		/* Remove cluster CPUs from tmpmask */
-		cpumask_andnot(tmpmsk, tmpmsk, &cmsk->mask);
+		cpumask_andnot(tmpmsk, tmpmsk, cmsk);
 	}
 
 	local_irq_restore(flags);
@@ -105,55 +100,98 @@ static u32 x2apic_calc_apicid(unsigned int cpu)
 
 static void init_x2apic_ldr(void)
 {
-	struct cluster_mask *cmsk = this_cpu_read(cluster_masks);
-	u32 cluster, apicid = apic_read(APIC_LDR);
-	unsigned int cpu;
+	struct cpumask *cmsk = this_cpu_read(cluster_masks);
 
-	x86_cpu_to_logical_apicid[smp_processor_id()] = apicid;
+	BUG_ON(!cmsk);
 
-	if (cmsk)
-		goto update;
-
-	cluster = apicid >> 16;
-	for_each_online_cpu(cpu) {
-		cmsk = per_cpu(cluster_masks, cpu);
-		/* Matching cluster found. Link and update it. */
-		if (cmsk && cmsk->clusterid == cluster)
-			goto update;
+	cpumask_set_cpu(smp_processor_id(), cmsk);
+}
+
+/*
+ * As an optimisation during boot, set the cluster_mask for all present
+ * CPUs at once, to prevent each of them having to iterate over the others
+ * to find the existing cluster_mask.
+ */
+static void prefill_clustermask(struct cpumask *cmsk, unsigned int cpu, u32 cluster)
+{
+	int cpu_i;
+
+	for_each_present_cpu(cpu_i) {
+		struct cpumask **cpu_cmsk = &per_cpu(cluster_masks, cpu_i);
+		u32 apicid = apic->cpu_present_to_apicid(cpu_i);
+
+		if (apicid == BAD_APICID || cpu_i == cpu || apic_cluster(apicid) != cluster)
+			continue;
+
+		if (WARN_ON_ONCE(*cpu_cmsk == cmsk))
+			continue;
+
+		BUG_ON(*cpu_cmsk);
+		*cpu_cmsk = cmsk;
 	}
-	cmsk = cluster_hotplug_mask;
-	cmsk->clusterid = cluster;
-	cluster_hotplug_mask = NULL;
-update:
-	this_cpu_write(cluster_masks, cmsk);
-	cpumask_set_cpu(smp_processor_id(), &cmsk->mask);
 }
 
-static int alloc_clustermask(unsigned int cpu, int node)
+static int alloc_clustermask(unsigned int cpu, u32 cluster, int node)
 {
+	struct cpumask *cmsk = NULL;
+	unsigned int cpu_i;
+
+	/*
+	 * At boot time, the CPU present mask is stable. The cluster mask is
+	 * allocated for the first CPU in the cluster and propagated to all
+	 * present siblings in the cluster. If the cluster mask is already set
+	 * on entry to this function for a given CPU, there is nothing to do.
+	 */
 	if (per_cpu(cluster_masks, cpu))
 		return 0;
+
+	if (system_state < SYSTEM_RUNNING)
+		goto alloc;
+
 	/*
-	 * If a hotplug spare mask exists, check whether it's on the right
-	 * node. If not, free it and allocate a new one.
+	 * On post boot hotplug for a CPU which was not present at boot time,
+	 * iterate over all possible CPUs (even those which are not present
+	 * any more) to find any existing cluster mask.
 	 */
-	if (cluster_hotplug_mask) {
-		if (cluster_hotplug_mask->node == node)
-			return 0;
-		kfree(cluster_hotplug_mask);
+	for_each_possible_cpu(cpu_i) {
+		u32 apicid = apic->cpu_present_to_apicid(cpu_i);
+
+		if (apicid != BAD_APICID && apic_cluster(apicid) == cluster) {
+			cmsk = per_cpu(cluster_masks, cpu_i);
+			/*
+			 * If the cluster is already initialized, just store
+			 * the mask and return. There's no need to propagate.
+			 */
+			if (cmsk) {
+				per_cpu(cluster_masks, cpu) = cmsk;
+				return 0;
+			}
+		}
 	}
-
-	cluster_hotplug_mask = kzalloc_node(sizeof(*cluster_hotplug_mask),
-					    GFP_KERNEL, node);
-	if (!cluster_hotplug_mask)
+	/*
+	 * No CPU in the cluster has ever been initialized, so fall through to
+	 * the boot time code which will also populate the cluster mask for any
+	 * other CPU in the cluster which is (now) present.
+	 */
+alloc:
+	cmsk = kzalloc_node(sizeof(*cmsk), GFP_KERNEL, node);
+	if (!cmsk)
 		return -ENOMEM;
-	cluster_hotplug_mask->node = node;
+	per_cpu(cluster_masks, cpu) = cmsk;
+	prefill_clustermask(cmsk, cpu, cluster);
+
 	return 0;
 }
 
 static int x2apic_prepare_cpu(unsigned int cpu)
 {
-	if (alloc_clustermask(cpu, cpu_to_node(cpu)) < 0)
+	u32 phys_apicid = apic->cpu_present_to_apicid(cpu);
+	u32 cluster = apic_cluster(phys_apicid);
+	u32 logical_apicid = (cluster << 16) | (1 << (phys_apicid & 0xf));
+
+	x86_cpu_to_logical_apicid[cpu] = logical_apicid;
+
+	if (alloc_clustermask(cpu, cluster, cpu_to_node(cpu)) < 0)
 		return -ENOMEM;
 	if (!zalloc_cpumask_var(&per_cpu(ipi_mask, cpu), GFP_KERNEL))
 		return -ENOMEM;
@@ -162,10 +200,10 @@ static int x2apic_prepare_cpu(unsigned int cpu)
 
 static int x2apic_dead_cpu(unsigned int dead_cpu)
 {
-	struct cluster_mask *cmsk = per_cpu(cluster_masks, dead_cpu);
+	struct cpumask *cmsk = per_cpu(cluster_masks, dead_cpu);
 
 	if (cmsk)
-		cpumask_clear_cpu(dead_cpu, &cmsk->mask);
+		cpumask_clear_cpu(dead_cpu, cmsk);
 	free_cpumask_var(per_cpu(ipi_mask, dead_cpu));
 	return 0;
 }
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 283dcd2f62c8..dc3576303f1a 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -115,6 +115,7 @@ static void __used common(void)
 	OFFSET(TSS_sp1, tss_struct, x86_tss.sp1);
 	OFFSET(TSS_sp2, tss_struct, x86_tss.sp2);
 	OFFSET(X86_top_of_stack, pcpu_hot, top_of_stack);
+	OFFSET(X86_current_task, pcpu_hot, current_task);
 #ifdef CONFIG_CALL_DEPTH_TRACKING
 	OFFSET(X86_call_depth, pcpu_hot, call_depth);
 #endif
diff --git a/arch/x86/kernel/callthunks.c b/arch/x86/kernel/callthunks.c
index ffea98f9064b..22ab13966427 100644
--- a/arch/x86/kernel/callthunks.c
+++ b/arch/x86/kernel/callthunks.c
@@ -330,8 +330,8 @@ void noinline callthunks_patch_module_calls(struct callthunk_sites *cs,
 					    struct module *mod)
 {
 	struct core_text ct = {
-		.base = (unsigned long)mod->core_layout.base,
-		.end  = (unsigned long)mod->core_layout.base + mod->core_layout.size,
+		.base = (unsigned long)mod->mem[MOD_TEXT].base,
+		.end  = (unsigned long)mod->mem[MOD_TEXT].base + mod->mem[MOD_TEXT].size,
 		.name = mod->name,
 	};
 
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 95cdd08c4cbb..571abf808ea3 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -929,6 +929,10 @@ static void init_amd(struct cpuinfo_x86 *c)
 	if (c->x86 >= 0x10)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 
+	/* AMD FSRM also implies FSRS */
+	if (cpu_has(c, X86_FEATURE_FSRM))
+		set_cpu_cap(c, X86_FEATURE_FSRS);
+
 	/* get apicid instead of initial apic id from cpuid */
 	c->apicid = hard_smp_processor_id();
 
@@ -1005,6 +1009,17 @@ static void init_amd(struct cpuinfo_x86 *c)
 		msr_set_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT);
 
 	check_null_seg_clears_base(c);
+
+	/*
+	 * Make sure EFER[AIBRSE - Automatic IBRS Enable] is set. The APs are brought up
+	 * using the trampoline code and as part of it, MSR_EFER gets prepared there in
+	 * order to be replicated onto them. Regardless, set it here again, if not set,
+	 * to protect against any future refactoring/code reorganization which might
+	 * miss setting this important bit.
+	 */
+	if (spectre_v2_in_eibrs_mode(spectre_v2_enabled) &&
+	    cpu_has(c, X86_FEATURE_AUTOIBRS))
+		WARN_ON_ONCE(msr_set_bit(MSR_EFER, _EFER_AUTOIBRS));
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index f9d060e71c3e..182af64387d0 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -784,8 +784,7 @@ static int __init nospectre_v1_cmdline(char *str)
 }
 early_param("nospectre_v1", nospectre_v1_cmdline);
 
-static enum spectre_v2_mitigation spectre_v2_enabled __ro_after_init =
-	SPECTRE_V2_NONE;
+enum spectre_v2_mitigation spectre_v2_enabled __ro_after_init = SPECTRE_V2_NONE;
 
 #undef pr_fmt
 #define pr_fmt(fmt)     "RETBleed: " fmt
@@ -1133,13 +1132,6 @@ spectre_v2_parse_user_cmdline(void)
 	return SPECTRE_V2_USER_CMD_AUTO;
 }
 
-static inline bool spectre_v2_in_eibrs_mode(enum spectre_v2_mitigation mode)
-{
-	return mode == SPECTRE_V2_EIBRS ||
-	       mode == SPECTRE_V2_EIBRS_RETPOLINE ||
-	       mode == SPECTRE_V2_EIBRS_LFENCE;
-}
-
 static inline bool spectre_v2_in_ibrs_mode(enum spectre_v2_mitigation mode)
 {
 	return spectre_v2_in_eibrs_mode(mode) || mode == SPECTRE_V2_IBRS;
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 8cd4126d8253..80710a68ef7d 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -121,6 +121,7 @@ static const struct x86_cpu_id ppin_cpuids[] = {
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, &ppin_info[X86_VENDOR_INTEL]),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, &ppin_info[X86_VENDOR_INTEL]),
 	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, &ppin_info[X86_VENDOR_INTEL]),
+	X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X, &ppin_info[X86_VENDOR_INTEL]),
 	X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL, &ppin_info[X86_VENDOR_INTEL]),
 	X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM, &ppin_info[X86_VENDOR_INTEL]),
 
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 57a5349e6954..f97b0fe13da8 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -83,4 +83,12 @@ unsigned int aperfmperf_get_khz(int cpu);
 extern void x86_spec_ctrl_setup_ap(void);
 extern void update_srbds_msr(void);
 
+extern enum spectre_v2_mitigation spectre_v2_enabled;
+
+static inline bool spectre_v2_in_eibrs_mode(enum spectre_v2_mitigation mode)
+{
+	return mode == SPECTRE_V2_EIBRS ||
+	       mode == SPECTRE_V2_EIBRS_RETPOLINE ||
+	       mode == SPECTRE_V2_EIBRS_LFENCE;
+}
 #endif /* ARCH_X86_CPU_H */
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 291d4167fab8..1c4639588ff9 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -1177,7 +1177,7 @@ static const struct {
 static struct ratelimit_state bld_ratelimit;
 
 static unsigned int sysctl_sld_mitigate = 1;
-static DEFINE_SEMAPHORE(buslock_sem);
+static DEFINE_SEMAPHORE(buslock_sem, 1);
 
 #ifdef CONFIG_PROC_SYSCTL
 static struct ctl_table sld_sysctls[] = {
@@ -1451,31 +1451,13 @@ void handle_bus_lock(struct pt_regs *regs)
 }
 
 /*
- * Bits in the IA32_CORE_CAPABILITIES are not architectural, so they should
- * only be trusted if it is confirmed that a CPU model implements a
- * specific feature at a particular bit position.
- *
- * The possible driver data field values:
- *
- * - 0: CPU models that are known to have the per-core split-lock detection
- *	feature even though they do not enumerate IA32_CORE_CAPABILITIES.
- *
- * - 1: CPU models which may enumerate IA32_CORE_CAPABILITIES and if so use
- *      bit 5 to enumerate the per-core split-lock detection feature.
+ * CPU models that are known to have the per-core split-lock detection
+ * feature even though they do not enumerate IA32_CORE_CAPABILITIES.
  */
 static const struct x86_cpu_id split_lock_cpu_ids[] __initconst = {
-	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		0),
-	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		0),
-	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,		0),
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	1),
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	1),
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	1),
-	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L,		1),
-	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE,		1),
-	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X,	1),
-	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE,		1),
-	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L,		1),
-	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE,		1),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,	0),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,	0),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,	0),
 	{}
 };
 
@@ -1487,24 +1469,27 @@ static void __init split_lock_setup(struct cpuinfo_x86 *c)
 	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
 		return;
 
+	/* Check for CPUs that have support but do not enumerate it: */
 	m = x86_match_cpu(split_lock_cpu_ids);
-	if (!m)
-		return;
+	if (m)
+		goto supported;
 
-	switch (m->driver_data) {
-	case 0:
-		break;
-	case 1:
-		if (!cpu_has(c, X86_FEATURE_CORE_CAPABILITIES))
-			return;
-		rdmsrl(MSR_IA32_CORE_CAPS, ia32_core_caps);
-		if (!(ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT))
-			return;
-		break;
-	default:
+	if (!cpu_has(c, X86_FEATURE_CORE_CAPABILITIES))
 		return;
-	}
 
+	/*
+	 * Not all bits in MSR_IA32_CORE_CAPS are architectural, but
+	 * MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT is.  All CPUs that set
+	 * it have split lock detection.
+	 */
+	rdmsrl(MSR_IA32_CORE_CAPS, ia32_core_caps);
+	if (ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT)
+		goto supported;
+
+	/* CPU is not in the model list and does not have the MSR bit: */
+	return;
+
+supported:
 	cpu_model_supports_sld = true;
 	__split_lock_setup();
 }
diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index 23c5072fbbb7..0b971f974096 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -235,10 +235,10 @@ static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
  * A list of the banks enabled on each logical CPU. Controls which respective
  * descriptors to initialize later in mce_threshold_create_device().
  */
-static DEFINE_PER_CPU(unsigned int, bank_map);
+static DEFINE_PER_CPU(u64, bank_map);
 
 /* Map of banks that have more than MCA_MISC0 available. */
-static DEFINE_PER_CPU(u32, smca_misc_banks_map);
+static DEFINE_PER_CPU(u64, smca_misc_banks_map);
 
 static void amd_threshold_interrupt(void);
 static void amd_deferred_error_interrupt(void);
@@ -267,7 +267,7 @@ static void smca_set_misc_banks_map(unsigned int bank, unsigned int cpu)
 		return;
 
 	if (low & MASK_BLKPTR_LO)
-		per_cpu(smca_misc_banks_map, cpu) |= BIT(bank);
+		per_cpu(smca_misc_banks_map, cpu) |= BIT_ULL(bank);
 
 }
 
@@ -530,7 +530,7 @@ static u32 smca_get_block_address(unsigned int bank, unsigned int block,
 	if (!block)
 		return MSR_AMD64_SMCA_MCx_MISC(bank);
 
-	if (!(per_cpu(smca_misc_banks_map, cpu) & BIT(bank)))
+	if (!(per_cpu(smca_misc_banks_map, cpu) & BIT_ULL(bank)))
 		return 0;
 
 	return MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
@@ -574,7 +574,7 @@ prepare_threshold_block(unsigned int bank, unsigned int block, u32 addr,
 	int new;
 
 	if (!block)
-		per_cpu(bank_map, cpu) |= (1 << bank);
+		per_cpu(bank_map, cpu) |= BIT_ULL(bank);
 
 	memset(&b, 0, sizeof(b));
 	b.cpu			= cpu;
@@ -878,7 +878,7 @@ static void amd_threshold_interrupt(void)
 		return;
 
 	for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank) {
-		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
+		if (!(per_cpu(bank_map, cpu) & BIT_ULL(bank)))
 			continue;
 
 		first_block = bp[bank]->blocks;
@@ -1029,7 +1029,7 @@ static const struct sysfs_ops threshold_ops = {
 
 static void threshold_block_release(struct kobject *kobj);
 
-static struct kobj_type threshold_ktype = {
+static const struct kobj_type threshold_ktype = {
 	.sysfs_ops		= &threshold_ops,
 	.default_groups		= default_groups,
 	.release		= threshold_block_release,
@@ -1356,7 +1356,7 @@ int mce_threshold_create_device(unsigned int cpu)
 		return -ENOMEM;
 
 	for (bank = 0; bank < numbanks; ++bank) {
-		if (!(this_cpu_read(bank_map) & (1 << bank)))
+		if (!(this_cpu_read(bank_map) & BIT_ULL(bank)))
 			continue;
 		err = threshold_create_bank(bp, cpu, bank);
 		if (err) {
diff --git a/arch/x86/kernel/cpu/mce/internal.h b/arch/x86/kernel/cpu/mce/internal.h
index 91a415553c27..d2412ce2d312 100644
--- a/arch/x86/kernel/cpu/mce/internal.h
+++ b/arch/x86/kernel/cpu/mce/internal.h
@@ -244,11 +244,11 @@ noinstr void pentium_machine_check(struct pt_regs *regs);
 noinstr void winchip_machine_check(struct pt_regs *regs);
 static inline void enable_p5_mce(void) { mce_p5_enabled = 1; }
 #else
-static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {}
-static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
-static inline void enable_p5_mce(void) {}
-static inline void pentium_machine_check(struct pt_regs *regs) {}
-static inline void winchip_machine_check(struct pt_regs *regs) {}
+static __always_inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {}
+static __always_inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
+static __always_inline void enable_p5_mce(void) {}
+static __always_inline void pentium_machine_check(struct pt_regs *regs) {}
+static __always_inline void winchip_machine_check(struct pt_regs *regs) {}
 #endif
 
 noinstr u64 mce_rdmsrl(u32 msr);
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 9eb457b10341..f5fdeb1e3606 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -61,7 +61,7 @@ static u8 amd_ucode_patch[MAX_NUMNODES][PATCH_MAX_SIZE];
 
 /*
  * Microcode patch container file is prepended to the initrd in cpio
- * format. See Documentation/x86/microcode.rst
+ * format. See Documentation/arch/x86/microcode.rst
  */
 static const char
 ucode_path[] __maybe_unused = "kernel/x86/microcode/AuthenticAMD.bin";
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 7a329e561354..3afcf3de0dd4 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -632,6 +632,7 @@ static const struct attribute_group cpu_root_microcode_group = {
 
 static int __init microcode_init(void)
 {
+	struct device *dev_root;
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 	int error;
 
@@ -652,10 +653,14 @@ static int __init microcode_init(void)
 	if (IS_ERR(microcode_pdev))
 		return PTR_ERR(microcode_pdev);
 
-	error = sysfs_create_group(&cpu_subsys.dev_root->kobj, &cpu_root_microcode_group);
-	if (error) {
-		pr_err("Error creating microcode group!\n");
-		goto out_pdev;
+	dev_root = bus_get_dev_root(&cpu_subsys);
+	if (dev_root) {
+		error = sysfs_create_group(&dev_root->kobj, &cpu_root_microcode_group);
+		put_device(dev_root);
+		if (error) {
+			pr_err("Error creating microcode group!\n");
+			goto out_pdev;
+		}
 	}
 
 	/* Do per-CPU setup */
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index f36dc2f796c5..c7969e806c64 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -18,7 +18,6 @@
 #include <linux/kexec.h>
 #include <linux/i8253.h>
 #include <linux/random.h>
-#include <linux/swiotlb.h>
 #include <asm/processor.h>
 #include <asm/hypervisor.h>
 #include <asm/hyperv-tlfs.h>
@@ -33,7 +32,6 @@
 #include <asm/nmi.h>
 #include <clocksource/hyperv_timer.h>
 #include <asm/numa.h>
-#include <asm/coco.h>
 
 /* Is Linux running as the root partition? */
 bool hv_root_partition;
@@ -250,11 +248,6 @@ static uint32_t  __init ms_hyperv_platform(void)
 	return HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS;
 }
 
-static unsigned char hv_get_nmi_reason(void)
-{
-	return 0;
-}
-
 #ifdef CONFIG_X86_LOCAL_APIC
 /*
  * Prior to WS2016 Debug-VM sends NMIs to all CPUs which makes
@@ -358,12 +351,16 @@ static void __init ms_hyperv_init_platform(void)
 	 * To mirror what Windows does we should extract CPU management
 	 * features and use the ReservedIdentityBit to detect if Linux is the
 	 * root partition. But that requires negotiating CPU management
-	 * interface (a process to be finalized).
+	 * interface (a process to be finalized). For now, use the privilege
+	 * flag as the indicator for running as root.
 	 *
-	 * For now, use the privilege flag as the indicator for running as
-	 * root.
+	 * Hyper-V should never specify running as root and as a Confidential
+	 * VM. But to protect against a compromised/malicious Hyper-V trying
+	 * to exploit root behavior to expose Confidential VM memory, ignore
+	 * the root partition setting if also a Confidential VM.
 	 */
-	if (cpuid_ebx(HYPERV_CPUID_FEATURES) & HV_CPU_MANAGEMENT) {
+	if ((ms_hyperv.priv_high & HV_CPU_MANAGEMENT) &&
+	    !(ms_hyperv.priv_high & HV_ISOLATION)) {
 		hv_root_partition = true;
 		pr_info("Hyper-V: running as root partition\n");
 	}
@@ -397,23 +394,16 @@ static void __init ms_hyperv_init_platform(void)
 	if (ms_hyperv.priv_high & HV_ISOLATION) {
 		ms_hyperv.isolation_config_a = cpuid_eax(HYPERV_CPUID_ISOLATION_CONFIG);
 		ms_hyperv.isolation_config_b = cpuid_ebx(HYPERV_CPUID_ISOLATION_CONFIG);
-		ms_hyperv.shared_gpa_boundary =
-			BIT_ULL(ms_hyperv.shared_gpa_boundary_bits);
+
+		if (ms_hyperv.shared_gpa_boundary_active)
+			ms_hyperv.shared_gpa_boundary =
+				BIT_ULL(ms_hyperv.shared_gpa_boundary_bits);
 
 		pr_info("Hyper-V: Isolation Config: Group A 0x%x, Group B 0x%x\n",
 			ms_hyperv.isolation_config_a, ms_hyperv.isolation_config_b);
 
-		if (hv_get_isolation_type() == HV_ISOLATION_TYPE_SNP) {
+		if (hv_get_isolation_type() == HV_ISOLATION_TYPE_SNP)
 			static_branch_enable(&isolation_type_snp);
-#ifdef CONFIG_SWIOTLB
-			swiotlb_unencrypted_base = ms_hyperv.shared_gpa_boundary;
-#endif
-		}
-		/* Isolation VMs are unenlightened SEV-based VMs, thus this check: */
-		if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) {
-			if (hv_get_isolation_type() != HV_ISOLATION_TYPE_NONE)
-				cc_set_vendor(CC_VENDOR_HYPERV);
-		}
 	}
 
 	if (hv_max_functions_eax >= HYPERV_CPUID_NESTED_FEATURES) {
@@ -482,6 +472,9 @@ static void __init ms_hyperv_init_platform(void)
 	i8253_clear_counter_on_shutdown = false;
 
 #if IS_ENABLED(CONFIG_HYPERV)
+	if ((hv_get_isolation_type() == HV_ISOLATION_TYPE_VBS) ||
+	    (hv_get_isolation_type() == HV_ISOLATION_TYPE_SNP))
+		hv_vtom_init();
 	/*
 	 * Setup the hook to get control post apic initialization.
 	 */
@@ -521,6 +514,7 @@ static void __init ms_hyperv_init_platform(void)
 
 	/* Register Hyper-V specific clocksource */
 	hv_init_clocksource();
+	hv_vtl_init_platform();
 #endif
 	/*
 	 * TSC should be marked as unstable only after Hyper-V
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 7fe51488e136..ded1fc7cb7cb 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -76,7 +76,7 @@ unsigned int resctrl_rmid_realloc_limit;
 #define CF(cf)	((unsigned long)(1048576 * (cf) + 0.5))
 
 /*
- * The correction factor table is documented in Documentation/x86/resctrl.rst.
+ * The correction factor table is documented in Documentation/arch/x86/resctrl.rst.
  * If rmid > rmid threshold, MBM total and local values should be multiplied
  * by the correction factor.
  *
@@ -383,41 +383,36 @@ void free_rmid(u32 rmid)
 		list_add_tail(&entry->list, &rmid_free_lru);
 }
 
+static struct mbm_state *get_mbm_state(struct rdt_domain *d, u32 rmid,
+				       enum resctrl_event_id evtid)
+{
+	switch (evtid) {
+	case QOS_L3_MBM_TOTAL_EVENT_ID:
+		return &d->mbm_total[rmid];
+	case QOS_L3_MBM_LOCAL_EVENT_ID:
+		return &d->mbm_local[rmid];
+	default:
+		return NULL;
+	}
+}
+
 static int __mon_event_count(u32 rmid, struct rmid_read *rr)
 {
 	struct mbm_state *m;
 	u64 tval = 0;
 
-	if (rr->first)
+	if (rr->first) {
 		resctrl_arch_reset_rmid(rr->r, rr->d, rmid, rr->evtid);
+		m = get_mbm_state(rr->d, rmid, rr->evtid);
+		if (m)
+			memset(m, 0, sizeof(struct mbm_state));
+		return 0;
+	}
 
 	rr->err = resctrl_arch_rmid_read(rr->r, rr->d, rmid, rr->evtid, &tval);
 	if (rr->err)
 		return rr->err;
 
-	switch (rr->evtid) {
-	case QOS_L3_OCCUP_EVENT_ID:
-		rr->val += tval;
-		return 0;
-	case QOS_L3_MBM_TOTAL_EVENT_ID:
-		m = &rr->d->mbm_total[rmid];
-		break;
-	case QOS_L3_MBM_LOCAL_EVENT_ID:
-		m = &rr->d->mbm_local[rmid];
-		break;
-	default:
-		/*
-		 * Code would never reach here because an invalid
-		 * event id would fail in resctrl_arch_rmid_read().
-		 */
-		return -EINVAL;
-	}
-
-	if (rr->first) {
-		memset(m, 0, sizeof(struct mbm_state));
-		return 0;
-	}
-
 	rr->val += tval;
 
 	return 0;
diff --git a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
index 524f8ff3e69c..458cb7419502 100644
--- a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
+++ b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
@@ -1580,7 +1580,7 @@ int rdt_pseudo_lock_init(void)
 
 	pseudo_lock_major = ret;
 
-	pseudo_lock_class = class_create(THIS_MODULE, "pseudo_lock");
+	pseudo_lock_class = class_create("pseudo_lock");
 	if (IS_ERR(pseudo_lock_class)) {
 		ret = PTR_ERR(pseudo_lock_class);
 		unregister_chrdev(pseudo_lock_major, "pseudo_lock");
diff --git a/arch/x86/kernel/cpu/sgx/main.c b/arch/x86/kernel/cpu/sgx/main.c
index e5a37b6e9aa5..166692f2d501 100644
--- a/arch/x86/kernel/cpu/sgx/main.c
+++ b/arch/x86/kernel/cpu/sgx/main.c
@@ -892,20 +892,19 @@ static struct miscdevice sgx_dev_provision = {
 int sgx_set_attribute(unsigned long *allowed_attributes,
 		      unsigned int attribute_fd)
 {
-	struct file *file;
+	struct fd f = fdget(attribute_fd);
 
-	file = fget(attribute_fd);
-	if (!file)
+	if (!f.file)
 		return -EINVAL;
 
-	if (file->f_op != &sgx_provision_fops) {
-		fput(file);
+	if (f.file->f_op != &sgx_provision_fops) {
+		fdput(f);
 		return -EINVAL;
 	}
 
 	*allowed_attributes |= SGX_ATTR_PROVISIONKEY;
 
-	fput(file);
+	fdput(f);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(sgx_set_attribute);
diff --git a/arch/x86/kernel/cpu/sgx/sgx.h b/arch/x86/kernel/cpu/sgx/sgx.h
index 0f2020653fba..d2dad21259a8 100644
--- a/arch/x86/kernel/cpu/sgx/sgx.h
+++ b/arch/x86/kernel/cpu/sgx/sgx.h
@@ -15,7 +15,7 @@
 
 #define EREMOVE_ERROR_MESSAGE \
 	"EREMOVE returned %d (0x%x) and an EPC page was leaked. SGX may become unusable. " \
-	"Refer to Documentation/x86/sgx.rst for more information."
+	"Refer to Documentation/arch/x86/sgx.rst for more information."
 
 #define SGX_MAX_EPC_SECTIONS		8
 #define SGX_EEXTEND_BLOCK_SIZE		256
diff --git a/arch/x86/kernel/cpu/umwait.c b/arch/x86/kernel/cpu/umwait.c
index ec8064c0ae03..2293efd6ffa6 100644
--- a/arch/x86/kernel/cpu/umwait.c
+++ b/arch/x86/kernel/cpu/umwait.c
@@ -232,7 +232,11 @@ static int __init umwait_init(void)
 	 * Add umwait control interface. Ignore failure, so at least the
 	 * default values are set up in case the machine manages to boot.
 	 */
-	dev = cpu_subsys.dev_root;
-	return sysfs_create_group(&dev->kobj, &umwait_attr_group);
+	dev = bus_get_dev_root(&cpu_subsys);
+	if (dev) {
+		ret = sysfs_create_group(&dev->kobj, &umwait_attr_group);
+		put_device(dev);
+	}
+	return ret;
 }
 device_initcall(umwait_init);
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 621ba9c0f17a..bdc0d5539b57 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -154,7 +154,7 @@ static int __init cpuid_init(void)
 		       CPUID_MAJOR);
 		return -EBUSY;
 	}
-	cpuid_class = class_create(THIS_MODULE, "cpuid");
+	cpuid_class = class_create("cpuid");
 	if (IS_ERR(cpuid_class)) {
 		err = PTR_ERR(cpuid_class);
 		goto out_chrdev;
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 714166cc25f2..0bab497c9436 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -1118,21 +1118,20 @@ void __copy_xstate_to_uabi_buf(struct membuf to, struct fpstate *fpstate,
 	zerofrom = offsetof(struct xregs_state, extended_state_area);
 
 	/*
-	 * The ptrace buffer is in non-compacted XSAVE format.  In
-	 * non-compacted format disabled features still occupy state space,
-	 * but there is no state to copy from in the compacted
-	 * init_fpstate. The gap tracking will zero these states.
-	 */
-	mask = fpstate->user_xfeatures;
-
-	/*
-	 * Dynamic features are not present in init_fpstate. When they are
-	 * in an all zeros init state, remove those from 'mask' to zero
-	 * those features in the user buffer instead of retrieving them
-	 * from init_fpstate.
+	 * This 'mask' indicates which states to copy from fpstate.
+	 * Those extended states that are not present in fpstate are
+	 * either disabled or initialized:
+	 *
+	 * In non-compacted format, disabled features still occupy
+	 * state space but there is no state to copy from in the
+	 * compacted init_fpstate. The gap tracking will zero these
+	 * states.
+	 *
+	 * The extended features have an all zeroes init state. Thus,
+	 * remove them from 'mask' to zero those features in the user
+	 * buffer instead of retrieving them from init_fpstate.
 	 */
-	if (fpu_state_size_dynamic())
-		mask &= (header.xfeatures | xinit->header.xcomp_bv);
+	mask = header.xfeatures;
 
 	for_each_extended_xfeature(i, mask) {
 		/*
@@ -1151,9 +1150,8 @@ void __copy_xstate_to_uabi_buf(struct membuf to, struct fpstate *fpstate,
 			pkru.pkru = pkru_val;
 			membuf_write(&to, &pkru, sizeof(pkru));
 		} else {
-			copy_feature(header.xfeatures & BIT_ULL(i), &to,
+			membuf_write(&to,
 				     __raw_xsave_addr(xsave, i),
-				     __raw_xsave_addr(xinit, i),
 				     xstate_sizes[i]);
 		}
 		/*
diff --git a/arch/x86/kernel/ftrace_32.S b/arch/x86/kernel/ftrace_32.S
index a0ed0e4a2c0c..0d9a14528176 100644
--- a/arch/x86/kernel/ftrace_32.S
+++ b/arch/x86/kernel/ftrace_32.S
@@ -163,6 +163,11 @@ SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
 	jmp	.Lftrace_ret
 SYM_CODE_END(ftrace_regs_caller)
 
+SYM_FUNC_START(ftrace_stub_direct_tramp)
+	CALL_DEPTH_ACCOUNT
+	RET
+SYM_FUNC_END(ftrace_stub_direct_tramp)
+
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 SYM_CODE_START(ftrace_graph_caller)
 	pushl	%eax
diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S
index fb4f1e01b64a..b8c720b5dab2 100644
--- a/arch/x86/kernel/ftrace_64.S
+++ b/arch/x86/kernel/ftrace_64.S
@@ -309,6 +309,10 @@ SYM_INNER_LABEL(ftrace_regs_caller_end, SYM_L_GLOBAL)
 SYM_FUNC_END(ftrace_regs_caller)
 STACK_FRAME_NON_STANDARD_FP(ftrace_regs_caller)
 
+SYM_FUNC_START(ftrace_stub_direct_tramp)
+	CALL_DEPTH_ACCOUNT
+	RET
+SYM_FUNC_END(ftrace_stub_direct_tramp)
 
 #else /* ! CONFIG_DYNAMIC_FTRACE */
 
@@ -342,7 +346,7 @@ STACK_FRAME_NON_STANDARD_FP(__fentry__)
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 SYM_CODE_START(return_to_handler)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_UNDEFINED
 	ANNOTATE_NOENDBR
 	subq  $16, %rsp
 
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index ec6fefbfd3c0..10c27b4261eb 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -29,7 +29,7 @@ static void __init i386_default_early_setup(void)
 	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
 }
 
-asmlinkage __visible void __init i386_start_kernel(void)
+asmlinkage __visible void __init __noreturn i386_start_kernel(void)
 {
 	/* Make sure IDT is set up before any exception happens */
 	idt_setup_early_handler();
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 387e4b12e823..49f7629b17f7 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -471,7 +471,7 @@ static void __init copy_bootdata(char *real_mode_data)
 	sme_unmap_bootdata(real_mode_data);
 }
 
-asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
+asmlinkage __visible void __init __noreturn x86_64_start_kernel(char * real_mode_data)
 {
 	/*
 	 * Build-time sanity checks on the kernel image and module
@@ -537,7 +537,7 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 	x86_64_start_reservations(real_mode_data);
 }
 
-void __init x86_64_start_reservations(char *real_mode_data)
+void __init __noreturn x86_64_start_reservations(char *real_mode_data)
 {
 	/* version is always not zero if it is copied */
 	if (!boot_params.hdr.version)
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 222efd4a09bc..a5df3e994f04 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -42,7 +42,7 @@ L3_START_KERNEL = pud_index(__START_KERNEL_map)
 	__HEAD
 	.code64
 SYM_CODE_START_NOALIGN(startup_64)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	/*
 	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
 	 * and someone has loaded an identity mapped page table
@@ -61,23 +61,15 @@ SYM_CODE_START_NOALIGN(startup_64)
 	 * tables and then reload them.
 	 */
 
-	/* Set up the stack for verify_cpu(), similar to initial_stack below */
-	leaq	(__end_init_task - FRAME_SIZE)(%rip), %rsp
+	/* Set up the stack for verify_cpu() */
+	leaq	(__end_init_task - PTREGS_SIZE)(%rip), %rsp
 
 	leaq	_text(%rip), %rdi
 
-	/*
-	 * initial_gs points to initial fixed_percpu_data struct with storage for
-	 * the stack protector canary. Global pointer fixups are needed at this
-	 * stage, so apply them as is done in fixup_pointer(), and initialize %gs
-	 * such that the canary can be accessed at %gs:40 for subsequent C calls.
-	 */
+	/* Setup GSBASE to allow stack canary access for C code */
 	movl	$MSR_GS_BASE, %ecx
-	movq	initial_gs(%rip), %rax
-	movq	$_text, %rdx
-	subq	%rdx, %rax
-	addq	%rdi, %rax
-	movq	%rax, %rdx
+	leaq	INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx
+	movl	%edx, %eax
 	shrq	$32,  %rdx
 	wrmsr
 
@@ -105,7 +97,7 @@ SYM_CODE_START_NOALIGN(startup_64)
 	lretq
 
 .Lon_kernel_cs:
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 
 	/* Sanitize CPU configuration */
 	call verify_cpu
@@ -127,7 +119,7 @@ SYM_CODE_START_NOALIGN(startup_64)
 SYM_CODE_END(startup_64)
 
 SYM_CODE_START(secondary_startup_64)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	ANNOTATE_NOENDBR
 	/*
 	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
@@ -156,7 +148,7 @@ SYM_CODE_START(secondary_startup_64)
 	 * verify_cpu() above to make sure NX is enabled.
 	 */
 SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	ANNOTATE_NOENDBR
 
 	/*
@@ -238,16 +230,39 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	ANNOTATE_RETPOLINE_SAFE
 	jmp	*%rax
 1:
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	ANNOTATE_NOENDBR // above
 
+#ifdef CONFIG_SMP
+	movl	smpboot_control(%rip), %ecx
+
+	/* Get the per cpu offset for the given CPU# which is in ECX */
+	movq	__per_cpu_offset(,%rcx,8), %rdx
+#else
+	xorl	%edx, %edx /* zero-extended to clear all of RDX */
+#endif /* CONFIG_SMP */
+
+	/*
+	 * Setup a boot time stack - Any secondary CPU will have lost its stack
+	 * by now because the cr3-switch above unmaps the real-mode stack.
+	 *
+	 * RDX contains the per-cpu offset
+	 */
+	movq	pcpu_hot + X86_current_task(%rdx), %rax
+	movq	TASK_threadsp(%rax), %rsp
+
 	/*
 	 * We must switch to a new descriptor in kernel space for the GDT
 	 * because soon the kernel won't have access anymore to the userspace
 	 * addresses where we're currently running on. We have to do that here
 	 * because in 32bit we couldn't load a 64bit linear address.
 	 */
-	lgdt	early_gdt_descr(%rip)
+	subq	$16, %rsp
+	movw	$(GDT_SIZE-1), (%rsp)
+	leaq	gdt_page(%rdx), %rax
+	movq	%rax, 2(%rsp)
+	lgdt	(%rsp)
+	addq	$16, %rsp
 
 	/* set up data segments */
 	xorl %eax,%eax
@@ -271,16 +286,13 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	 * the per cpu areas are set up.
 	 */
 	movl	$MSR_GS_BASE,%ecx
-	movl	initial_gs(%rip),%eax
-	movl	initial_gs+4(%rip),%edx
+#ifndef CONFIG_SMP
+	leaq	INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx
+#endif
+	movl	%edx, %eax
+	shrq	$32, %rdx
 	wrmsr
 
-	/*
-	 * Setup a boot time stack - Any secondary CPU will have lost its stack
-	 * by now because the cr3-switch above unmaps the real-mode stack
-	 */
-	movq initial_stack(%rip), %rsp
-
 	/* Setup and Load IDT */
 	pushq	%rsi
 	call	early_setup_idt
@@ -371,8 +383,12 @@ SYM_CODE_END(secondary_startup_64)
  */
 SYM_CODE_START(start_cpu0)
 	ANNOTATE_NOENDBR
-	UNWIND_HINT_EMPTY
-	movq	initial_stack(%rip), %rsp
+	UNWIND_HINT_END_OF_STACK
+
+	/* Find the idle task stack */
+	movq	PER_CPU_VAR(pcpu_hot) + X86_current_task, %rcx
+	movq	TASK_threadsp(%rcx), %rsp
+
 	jmp	.Ljump_to_C_code
 SYM_CODE_END(start_cpu0)
 #endif
@@ -390,8 +406,6 @@ SYM_CODE_START_NOALIGN(vc_boot_ghcb)
 	UNWIND_HINT_IRET_REGS offset=8
 	ENDBR
 
-	ANNOTATE_UNRET_END
-
 	/* Build pt_regs */
 	PUSH_AND_CLEAR_REGS
 
@@ -416,16 +430,9 @@ SYM_CODE_END(vc_boot_ghcb)
 	__REFDATA
 	.balign	8
 SYM_DATA(initial_code,	.quad x86_64_start_kernel)
-SYM_DATA(initial_gs,	.quad INIT_PER_CPU_VAR(fixed_percpu_data))
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 SYM_DATA(initial_vc_handler,	.quad handle_vc_boot_ghcb)
 #endif
-
-/*
- * The FRAME_SIZE gap is a convention which helps the in-kernel unwinder
- * reliably detect the end of the stack.
- */
-SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - FRAME_SIZE)
 	__FINITDATA
 
 	__INIT
@@ -451,7 +458,6 @@ SYM_CODE_END(early_idt_handler_array)
 
 SYM_CODE_START_LOCAL(early_idt_handler_common)
 	UNWIND_HINT_IRET_REGS offset=16
-	ANNOTATE_UNRET_END
 	/*
 	 * The stack is the hardware frame, an error code or zero, and the
 	 * vector number.
@@ -501,8 +507,6 @@ SYM_CODE_START_NOALIGN(vc_no_ghcb)
 	UNWIND_HINT_IRET_REGS offset=8
 	ENDBR
 
-	ANNOTATE_UNRET_END
-
 	/* Build pt_regs */
 	PUSH_AND_CLEAR_REGS
 
@@ -657,8 +661,7 @@ SYM_DATA_END(level1_fixmap_pgt)
 	.data
 	.align 16
 
-SYM_DATA(early_gdt_descr,		.word GDT_ENTRIES*8-1)
-SYM_DATA_LOCAL(early_gdt_descr_base,	.quad INIT_PER_CPU_VAR(gdt_page))
+SYM_DATA(smpboot_control,		.long 0)
 
 	.align 16
 /* This must match the first entry in level2_kernel_pgt */
diff --git a/arch/x86/kernel/itmt.c b/arch/x86/kernel/itmt.c
index 9ff480e94511..670eb08b972a 100644
--- a/arch/x86/kernel/itmt.c
+++ b/arch/x86/kernel/itmt.c
@@ -77,15 +77,6 @@ static struct ctl_table itmt_kern_table[] = {
 	{}
 };
 
-static struct ctl_table itmt_root_table[] = {
-	{
-		.procname	= "kernel",
-		.mode		= 0555,
-		.child		= itmt_kern_table,
-	},
-	{}
-};
-
 static struct ctl_table_header *itmt_sysctl_header;
 
 /**
@@ -114,7 +105,7 @@ int sched_set_itmt_support(void)
 		return 0;
 	}
 
-	itmt_sysctl_header = register_sysctl_table(itmt_root_table);
+	itmt_sysctl_header = register_sysctl("kernel", itmt_kern_table);
 	if (!itmt_sysctl_header) {
 		mutex_unlock(&itmt_update_mutex);
 		return -ENOMEM;
diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index 6b58610a1552..a61c12c01270 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -476,7 +476,7 @@ static void *bzImage64_load(struct kimage *image, char *kernel,
 	efi_map_offset = params_cmdline_sz;
 	efi_setup_data_offset = efi_map_offset + ALIGN(efi_map_sz, 16);
 
-	/* Copy setup header onto bootparams. Documentation/x86/boot.rst */
+	/* Copy setup header onto bootparams. Documentation/arch/x86/boot.rst */
 	setup_header_size = 0x0202 + kernel[0x0201] - setup_hdr_offset;
 
 	/* Is there a limit on setup header size? */
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 0611fd83858e..1a3e2c05a8a5 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -374,17 +374,6 @@ void machine_kexec(struct kimage *image)
 /* arch-dependent functionality related to kexec file-based syscall */
 
 #ifdef CONFIG_KEXEC_FILE
-void *arch_kexec_kernel_image_load(struct kimage *image)
-{
-	if (!image->fops || !image->fops->load)
-		return ERR_PTR(-ENOEXEC);
-
-	return image->fops->load(image, image->kernel_buf,
-				 image->kernel_buf_len, image->initrd_buf,
-				 image->initrd_buf_len, image->cmdline_buf,
-				 image->cmdline_buf_len);
-}
-
 /*
  * Apply purgatory relocations.
  *
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index 84ad0e61ba6e..b05f62ee2344 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -362,8 +362,8 @@ int module_finalize(const Elf_Ehdr *hdr,
 	}
 	if (locks) {
 		void *lseg = (void *)locks->sh_addr;
-		void *text = me->core_layout.base;
-		void *text_end = text + me->core_layout.text_size;
+		void *text = me->mem[MOD_TEXT].base;
+		void *text_end = text + me->mem[MOD_TEXT].size;
 		alternatives_smp_module_add(me, me->name,
 					    lseg, lseg + locks->sh_size,
 					    text, text_end);
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 708751311786..7bb17d37db01 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -263,7 +263,7 @@ static int __init msr_init(void)
 		pr_err("unable to get major %d for msr\n", MSR_MAJOR);
 		return -EBUSY;
 	}
-	msr_class = class_create(THIS_MODULE, "msr");
+	msr_class = class_create("msr");
 	if (IS_ERR(msr_class)) {
 		err = PTR_ERR(msr_class);
 		goto out_chrdev;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 42e182868873..ac10b46c5832 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -64,11 +64,11 @@ static unsigned paravirt_patch_call(void *insn_buff, const void *target,
 }
 
 #ifdef CONFIG_PARAVIRT_XXL
-/* identity function, which can be inlined */
-u64 notrace _paravirt_ident_64(u64 x)
-{
-	return x;
-}
+DEFINE_PARAVIRT_ASM(_paravirt_ident_64, "mov %rdi, %rax", .text);
+DEFINE_PARAVIRT_ASM(pv_native_save_fl, "pushf; pop %rax", .noinstr.text);
+DEFINE_PARAVIRT_ASM(pv_native_irq_disable, "cli", .noinstr.text);
+DEFINE_PARAVIRT_ASM(pv_native_irq_enable, "sti", .noinstr.text);
+DEFINE_PARAVIRT_ASM(pv_native_read_cr2, "mov %cr2, %rax", .noinstr.text);
 #endif
 
 DEFINE_STATIC_KEY_TRUE(virt_spin_lock_key);
@@ -197,11 +197,6 @@ void paravirt_end_context_switch(struct task_struct *next)
 		arch_enter_lazy_mmu_mode();
 }
 
-static noinstr unsigned long pv_native_read_cr2(void)
-{
-	return native_read_cr2();
-}
-
 static noinstr void pv_native_write_cr2(unsigned long val)
 {
 	native_write_cr2(val);
@@ -222,16 +217,6 @@ noinstr void pv_native_wbinvd(void)
 	native_wbinvd();
 }
 
-static noinstr void pv_native_irq_enable(void)
-{
-	native_irq_enable();
-}
-
-static noinstr void pv_native_irq_disable(void)
-{
-	native_irq_disable();
-}
-
 static noinstr void pv_native_safe_halt(void)
 {
 	native_safe_halt();
@@ -298,7 +283,7 @@ struct paravirt_patch_template pv_ops = {
 	.cpu.end_context_switch		= paravirt_nop,
 
 	/* Irq ops. */
-	.irq.save_fl		= __PV_IS_CALLEE_SAVE(native_save_fl),
+	.irq.save_fl		= __PV_IS_CALLEE_SAVE(pv_native_save_fl),
 	.irq.irq_disable	= __PV_IS_CALLEE_SAVE(pv_native_irq_disable),
 	.irq.irq_enable		= __PV_IS_CALLEE_SAVE(pv_native_irq_enable),
 	.irq.safe_halt		= pv_native_safe_halt,
@@ -363,8 +348,7 @@ struct paravirt_patch_template pv_ops = {
 	.mmu.make_pte		= PTE_IDENT,
 	.mmu.make_pgd		= PTE_IDENT,
 
-	.mmu.dup_mmap		= paravirt_nop,
-	.mmu.activate_mm	= paravirt_nop,
+	.mmu.enter_mmap		= paravirt_nop,
 
 	.mmu.lazy_mode = {
 		.enter		= paravirt_nop,
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 30bbe4abb5d6..de6be0a3965e 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -124,7 +124,7 @@ void __init pci_iommu_alloc(void)
 }
 
 /*
- * See <Documentation/x86/x86_64/boot-options.rst> for the iommu kernel
+ * See <Documentation/arch/x86/x86_64/boot-options.rst> for the iommu kernel
  * parameter documentation.
  */
 static __init int iommu_setup(char *p)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index b650cde3f64d..dac41a0072ea 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -5,6 +5,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/cpu.h>
 #include <linux/prctl.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
@@ -48,6 +49,7 @@
 #include <asm/frame.h>
 #include <asm/unwind.h>
 #include <asm/tdx.h>
+#include <asm/mmu_context.h>
 
 #include "process.h"
 
@@ -162,6 +164,9 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 
 	savesegment(es, p->thread.es);
 	savesegment(ds, p->thread.ds);
+
+	if (p->mm && (clone_flags & (CLONE_VM | CLONE_VFORK)) == CLONE_VM)
+		set_bit(MM_CONTEXT_LOCK_LAM, &p->mm->context.flags);
 #else
 	p->thread.sp0 = (unsigned long) (childregs + 1);
 	savesegment(gs, p->thread.gs);
@@ -368,6 +373,8 @@ void arch_setup_new_exec(void)
 		task_clear_spec_ssb_noexec(current);
 		speculation_ctrl_update(read_thread_flags());
 	}
+
+	mm_reset_untag_mask(current->mm);
 }
 
 #ifdef CONFIG_X86_IOPL_IOPERM
@@ -715,7 +722,7 @@ static bool x86_idle_set(void)
 }
 
 #ifndef CONFIG_SMP
-static inline void play_dead(void)
+static inline void __noreturn play_dead(void)
 {
 	BUG();
 }
@@ -727,7 +734,7 @@ void arch_cpu_idle_enter(void)
 	local_touch_nmi();
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	play_dead();
 }
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index bb65a68b4b49..223b223f713f 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -671,7 +671,7 @@ void set_personality_64bit(void)
 	task_pt_regs(current)->orig_ax = __NR_execve;
 	current_thread_info()->status &= ~TS_COMPAT;
 	if (current->mm)
-		current->mm->context.flags = MM_CONTEXT_HAS_VSYSCALL;
+		__set_bit(MM_CONTEXT_HAS_VSYSCALL, &current->mm->context.flags);
 
 	/* TBD: overwrites user setup. Should have two bits.
 	   But 64bit processes have always behaved this way,
@@ -708,7 +708,7 @@ static void __set_personality_ia32(void)
 		 * uprobes applied to this MM need to know this and
 		 * cannot use user_64bit_mode() at that time.
 		 */
-		current->mm->context.flags = MM_CONTEXT_UPROBE_IA32;
+		__set_bit(MM_CONTEXT_UPROBE_IA32, &current->mm->context.flags);
 	}
 
 	current->personality |= force_personality32;
@@ -743,6 +743,52 @@ static long prctl_map_vdso(const struct vdso_image *image, unsigned long addr)
 }
 #endif
 
+#ifdef CONFIG_ADDRESS_MASKING
+
+#define LAM_U57_BITS 6
+
+static int prctl_enable_tagged_addr(struct mm_struct *mm, unsigned long nr_bits)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_LAM))
+		return -ENODEV;
+
+	/* PTRACE_ARCH_PRCTL */
+	if (current->mm != mm)
+		return -EINVAL;
+
+	if (mm_valid_pasid(mm) &&
+	    !test_bit(MM_CONTEXT_FORCE_TAGGED_SVA, &mm->context.flags))
+		return -EINVAL;
+
+	if (mmap_write_lock_killable(mm))
+		return -EINTR;
+
+	if (test_bit(MM_CONTEXT_LOCK_LAM, &mm->context.flags)) {
+		mmap_write_unlock(mm);
+		return -EBUSY;
+	}
+
+	if (!nr_bits) {
+		mmap_write_unlock(mm);
+		return -EINVAL;
+	} else if (nr_bits <= LAM_U57_BITS) {
+		mm->context.lam_cr3_mask = X86_CR3_LAM_U57;
+		mm->context.untag_mask =  ~GENMASK(62, 57);
+	} else {
+		mmap_write_unlock(mm);
+		return -EINVAL;
+	}
+
+	write_cr3(__read_cr3() | mm->context.lam_cr3_mask);
+	set_tlbstate_lam_mode(mm);
+	set_bit(MM_CONTEXT_LOCK_LAM, &mm->context.flags);
+
+	mmap_write_unlock(mm);
+
+	return 0;
+}
+#endif
+
 long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2)
 {
 	int ret = 0;
@@ -830,7 +876,23 @@ long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2)
 	case ARCH_MAP_VDSO_64:
 		return prctl_map_vdso(&vdso_image_64, arg2);
 #endif
-
+#ifdef CONFIG_ADDRESS_MASKING
+	case ARCH_GET_UNTAG_MASK:
+		return put_user(task->mm->context.untag_mask,
+				(unsigned long __user *)arg2);
+	case ARCH_ENABLE_TAGGED_ADDR:
+		return prctl_enable_tagged_addr(task->mm, arg2);
+	case ARCH_FORCE_TAGGED_SVA:
+		if (current != task)
+			return -EINVAL;
+		set_bit(MM_CONTEXT_FORCE_TAGGED_SVA, &task->mm->context.flags);
+		return 0;
+	case ARCH_GET_MAX_TAG_BITS:
+		if (!cpu_feature_enabled(X86_FEATURE_LAM))
+			return put_user(0, (unsigned long __user *)arg2);
+		else
+			return put_user(LAM_U57_BITS, (unsigned long __user *)arg2);
+#endif
 	default:
 		ret = -EINVAL;
 		break;
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d03c551defcc..3adbe97015c1 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -920,7 +920,7 @@ void run_crash_ipi_callback(struct pt_regs *regs)
 }
 
 /* Override the weak function in kernel/panic.c */
-void nmi_panic_self_stop(struct pt_regs *regs)
+void __noreturn nmi_panic_self_stop(struct pt_regs *regs)
 {
 	while (1) {
 		/* If no CPU is preparing crash dump, we simply loop here. */
diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S
index 4a73351f87f8..56cab1bb25f5 100644
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -43,7 +43,7 @@
 	.code64
 SYM_CODE_START_NOALIGN(relocate_range)
 SYM_CODE_START_NOALIGN(relocate_kernel)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	ANNOTATE_NOENDBR
 	/*
 	 * %rdi indirection_page
@@ -113,7 +113,7 @@ SYM_CODE_START_NOALIGN(relocate_kernel)
 SYM_CODE_END(relocate_kernel)
 
 SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	/* set return address to 0 if not preserving context */
 	pushq	$0
 	/* store the start address on the stack */
@@ -231,7 +231,7 @@ SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
 SYM_CODE_END(identity_mapped)
 
 SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	ANNOTATE_NOENDBR // RET target, above
 	movq	RSP(%r8), %rsp
 	movq	CR4(%r8), %rax
@@ -256,8 +256,8 @@ SYM_CODE_END(virtual_mapped)
 
 	/* Do the copies */
 SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
-	UNWIND_HINT_EMPTY
-	movq	%rdi, %rcx 	/* Put the page_list in %rcx */
+	UNWIND_HINT_END_OF_STACK
+	movq	%rdi, %rcx	/* Put the page_list in %rcx */
 	xorl	%edi, %edi
 	xorl	%esi, %esi
 	jmp	1f
diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c
index 3f664ab277c4..b031244d6d2d 100644
--- a/arch/x86/kernel/sev.c
+++ b/arch/x86/kernel/sev.c
@@ -22,6 +22,8 @@
 #include <linux/efi.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/psp-sev.h>
+#include <uapi/linux/sev-guest.h>
 
 #include <asm/cpu_entry_area.h>
 #include <asm/stacktrace.h>
@@ -2175,7 +2177,7 @@ static int __init init_sev_config(char *str)
 }
 __setup("sev=", init_sev_config);
 
-int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, unsigned long *fw_err)
+int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, struct snp_guest_request_ioctl *rio)
 {
 	struct ghcb_state state;
 	struct es_em_ctxt ctxt;
@@ -2183,8 +2185,7 @@ int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, unsigned
 	struct ghcb *ghcb;
 	int ret;
 
-	if (!fw_err)
-		return -EINVAL;
+	rio->exitinfo2 = SEV_RET_NO_FW_CALL;
 
 	/*
 	 * __sev_get_ghcb() needs to run with IRQs disabled because it is using
@@ -2209,16 +2210,16 @@ int snp_issue_guest_request(u64 exit_code, struct snp_req_data *input, unsigned
 	if (ret)
 		goto e_put;
 
-	*fw_err = ghcb->save.sw_exit_info_2;
-	switch (*fw_err) {
+	rio->exitinfo2 = ghcb->save.sw_exit_info_2;
+	switch (rio->exitinfo2) {
 	case 0:
 		break;
 
-	case SNP_GUEST_REQ_ERR_BUSY:
+	case SNP_GUEST_VMM_ERR(SNP_GUEST_VMM_ERR_BUSY):
 		ret = -EAGAIN;
 		break;
 
-	case SNP_GUEST_REQ_INVALID_LEN:
+	case SNP_GUEST_VMM_ERR(SNP_GUEST_VMM_ERR_INVALID_LEN):
 		/* Number of expected pages are returned in RBX */
 		if (exit_code == SVM_VMGEXIT_EXT_GUEST_REQUEST) {
 			input->data_npages = ghcb_get_rbx(ghcb);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 9013bb28255a..352f0ce1ece4 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -121,17 +121,20 @@ int arch_update_cpu_topology(void)
 	return retval;
 }
 
+
+static unsigned int smpboot_warm_reset_vector_count;
+
 static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	CMOS_WRITE(0xa, 0xf);
+	if (!smpboot_warm_reset_vector_count++) {
+		CMOS_WRITE(0xa, 0xf);
+		*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) = start_eip >> 4;
+		*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = start_eip & 0xf;
+	}
 	spin_unlock_irqrestore(&rtc_lock, flags);
-	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) =
-							start_eip >> 4;
-	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) =
-							start_eip & 0xf;
 }
 
 static inline void smpboot_restore_warm_reset_vector(void)
@@ -143,10 +146,12 @@ static inline void smpboot_restore_warm_reset_vector(void)
 	 * to default values.
 	 */
 	spin_lock_irqsave(&rtc_lock, flags);
-	CMOS_WRITE(0, 0xf);
+	if (!--smpboot_warm_reset_vector_count) {
+		CMOS_WRITE(0, 0xf);
+		*((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
+	}
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	*((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
 }
 
 /*
@@ -1059,8 +1064,6 @@ int common_cpu_up(unsigned int cpu, struct task_struct *idle)
 #ifdef CONFIG_X86_32
 	/* Stack for startup_32 can be just as for start_secondary onwards */
 	per_cpu(pcpu_hot.top_of_stack, cpu) = task_top_of_stack(idle);
-#else
-	initial_gs = per_cpu_offset(cpu);
 #endif
 	return 0;
 }
@@ -1086,9 +1089,14 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,
 		start_ip = real_mode_header->trampoline_start64;
 #endif
 	idle->thread.sp = (unsigned long)task_pt_regs(idle);
-	early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu);
 	initial_code = (unsigned long)start_secondary;
-	initial_stack  = idle->thread.sp;
+
+	if (IS_ENABLED(CONFIG_X86_32)) {
+		early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu);
+		initial_stack  = idle->thread.sp;
+	} else {
+		smpboot_control = cpu;
+	}
 
 	/* Enable the espfix hack for this CPU */
 	init_espfix_ap(cpu);
@@ -1816,7 +1824,7 @@ static inline void mwait_play_dead(void)
 	}
 }
 
-void hlt_play_dead(void)
+void __noreturn hlt_play_dead(void)
 {
 	if (__this_cpu_read(cpu_info.x86) >= 4)
 		wbinvd();
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index d317dc3d06a3..8b83d8fbce71 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -671,15 +671,15 @@ static bool try_fixup_enqcmd_gp(void)
 	if (!cpu_feature_enabled(X86_FEATURE_ENQCMD))
 		return false;
 
-	pasid = current->mm->pasid;
-
 	/*
 	 * If the mm has not been allocated a
 	 * PASID, the #GP can not be fixed up.
 	 */
-	if (!pasid_valid(pasid))
+	if (!mm_valid_pasid(current->mm))
 		return false;
 
+	pasid = current->mm->pasid;
+
 	/*
 	 * Did this thread already have its PASID activated?
 	 * If so, the #GP must be from something else.
diff --git a/arch/x86/kernel/unwind_orc.c b/arch/x86/kernel/unwind_orc.c
index 37307b40f8da..3ac50b7298d1 100644
--- a/arch/x86/kernel/unwind_orc.c
+++ b/arch/x86/kernel/unwind_orc.c
@@ -133,7 +133,7 @@ static struct orc_entry null_orc_entry = {
 	.sp_offset = sizeof(long),
 	.sp_reg = ORC_REG_SP,
 	.bp_reg = ORC_REG_UNDEFINED,
-	.type = UNWIND_HINT_TYPE_CALL
+	.type = ORC_TYPE_CALL
 };
 
 #ifdef CONFIG_CALL_THUNKS
@@ -153,12 +153,11 @@ static struct orc_entry *orc_callthunk_find(unsigned long ip)
 
 /* Fake frame pointer entry -- used as a fallback for generated code */
 static struct orc_entry orc_fp_entry = {
-	.type		= UNWIND_HINT_TYPE_CALL,
+	.type		= ORC_TYPE_CALL,
 	.sp_reg		= ORC_REG_BP,
 	.sp_offset	= 16,
 	.bp_reg		= ORC_REG_PREV_SP,
 	.bp_offset	= -16,
-	.end		= 0,
 };
 
 static struct orc_entry *orc_find(unsigned long ip)
@@ -250,13 +249,13 @@ static int orc_sort_cmp(const void *_a, const void *_b)
 		return -1;
 
 	/*
-	 * The "weak" section terminator entries need to always be on the left
+	 * The "weak" section terminator entries need to always be first
 	 * to ensure the lookup code skips them in favor of real entries.
 	 * These terminator entries exist to handle any gaps created by
 	 * whitelisted .o files which didn't get objtool generation.
 	 */
 	orc_a = cur_orc_table + (a - cur_orc_ip_table);
-	return orc_a->sp_reg == ORC_REG_UNDEFINED && !orc_a->end ? -1 : 1;
+	return orc_a->type == ORC_TYPE_UNDEFINED ? -1 : 1;
 }
 
 void unwind_module_init(struct module *mod, void *_orc_ip, size_t orc_ip_size,
@@ -474,14 +473,12 @@ bool unwind_next_frame(struct unwind_state *state)
 		 */
 		orc = &orc_fp_entry;
 		state->error = true;
-	}
-
-	/* End-of-stack check for kernel threads: */
-	if (orc->sp_reg == ORC_REG_UNDEFINED) {
-		if (!orc->end)
+	} else {
+		if (orc->type == ORC_TYPE_UNDEFINED)
 			goto err;
 
-		goto the_end;
+		if (orc->type == ORC_TYPE_END_OF_STACK)
+			goto the_end;
 	}
 
 	state->signal = orc->signal;
@@ -554,7 +551,7 @@ bool unwind_next_frame(struct unwind_state *state)
 
 	/* Find IP, SP and possibly regs: */
 	switch (orc->type) {
-	case UNWIND_HINT_TYPE_CALL:
+	case ORC_TYPE_CALL:
 		ip_p = sp - sizeof(long);
 
 		if (!deref_stack_reg(state, ip_p, &state->ip))
@@ -567,7 +564,7 @@ bool unwind_next_frame(struct unwind_state *state)
 		state->prev_regs = NULL;
 		break;
 
-	case UNWIND_HINT_TYPE_REGS:
+	case ORC_TYPE_REGS:
 		if (!deref_stack_regs(state, sp, &state->ip, &state->sp)) {
 			orc_warn_current("can't access registers at %pB\n",
 					 (void *)orig_ip);
@@ -590,13 +587,13 @@ bool unwind_next_frame(struct unwind_state *state)
 		state->full_regs = true;
 		break;
 
-	case UNWIND_HINT_TYPE_REGS_PARTIAL:
+	case ORC_TYPE_REGS_PARTIAL:
 		if (!deref_stack_iret_regs(state, sp, &state->ip, &state->sp)) {
 			orc_warn_current("can't access iret registers at %pB\n",
 					 (void *)orig_ip);
 			goto err;
 		}
-		/* See UNWIND_HINT_TYPE_REGS case comment. */
+		/* See ORC_TYPE_REGS case comment. */
 		state->ip = unwind_recover_rethook(state, state->ip,
 				(unsigned long *)(state->sp - sizeof(long)));
 
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index ef80d361b463..d82f4fa2f1bf 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -33,8 +33,8 @@ static int __init iommu_init_noop(void) { return 0; }
 static void iommu_shutdown_noop(void) { }
 bool __init bool_x86_init_noop(void) { return false; }
 void x86_op_int_noop(int cpu) { }
-static __init int set_rtc_noop(const struct timespec64 *now) { return -EINVAL; }
-static __init void get_rtc_noop(struct timespec64 *now) { }
+int set_rtc_noop(const struct timespec64 *now) { return -EINVAL; }
+void get_rtc_noop(struct timespec64 *now) { }
 
 static __initconst const struct of_device_id of_cmos_match[] = {
 	{ .compatible = "motorola,mc146818" },
@@ -134,6 +134,7 @@ static void enc_status_change_prepare_noop(unsigned long vaddr, int npages, bool
 static bool enc_status_change_finish_noop(unsigned long vaddr, int npages, bool enc) { return false; }
 static bool enc_tlb_flush_required_noop(bool enc) { return false; }
 static bool enc_cache_flush_required_noop(void) { return false; }
+static bool is_private_mmio_noop(u64 addr) {return false; }
 
 struct x86_platform_ops x86_platform __ro_after_init = {
 	.calibrate_cpu			= native_calibrate_cpu_early,
@@ -149,6 +150,7 @@ struct x86_platform_ops x86_platform __ro_after_init = {
 	.realmode_reserve		= reserve_real_mode,
 	.realmode_init			= init_real_mode,
 	.hyper.pin_vcpu			= x86_op_int_noop,
+	.hyper.is_private_mmio		= is_private_mmio_noop,
 
 	.guest = {
 		.enc_status_change_prepare = enc_status_change_prepare_noop,
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8e578311ca9d..89ca7f4c1464 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -46,7 +46,6 @@ config KVM
 	select KVM_XFER_TO_GUEST_WORK
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_VFIO
-	select SRCU
 	select INTERVAL_TREE
 	select HAVE_KVM_PM_NOTIFIER if PM
 	select KVM_GENERIC_HARDWARE_ENABLING
diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c
index 042dee556125..995eb5054360 100644
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -368,9 +368,39 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val)
 		mask_after = e->fields.mask;
 		if (mask_before != mask_after)
 			kvm_fire_mask_notifiers(ioapic->kvm, KVM_IRQCHIP_IOAPIC, index, mask_after);
-		if (e->fields.trig_mode == IOAPIC_LEVEL_TRIG
-		    && ioapic->irr & (1 << index))
-			ioapic_service(ioapic, index, false);
+		if (e->fields.trig_mode == IOAPIC_LEVEL_TRIG &&
+		    ioapic->irr & (1 << index) && !e->fields.mask && !e->fields.remote_irr) {
+			/*
+			 * Pending status in irr may be outdated: the IRQ line may have
+			 * already been deasserted by a device while the IRQ was masked.
+			 * This occurs, for instance, if the interrupt is handled in a
+			 * Linux guest as a oneshot interrupt (IRQF_ONESHOT). In this
+			 * case the guest acknowledges the interrupt to the device in
+			 * its threaded irq handler, i.e. after the EOI but before
+			 * unmasking, so at the time of unmasking the IRQ line is
+			 * already down but our pending irr bit is still set. In such
+			 * cases, injecting this pending interrupt to the guest is
+			 * buggy: the guest will receive an extra unwanted interrupt.
+			 *
+			 * So we need to check here if the IRQ is actually still pending.
+			 * As we are generally not able to probe the IRQ line status
+			 * directly, we do it through irqfd resampler. Namely, we clear
+			 * the pending status and notify the resampler that this interrupt
+			 * is done, without actually injecting it into the guest. If the
+			 * IRQ line is actually already deasserted, we are done. If it is
+			 * still asserted, a new interrupt will be shortly triggered
+			 * through irqfd and injected into the guest.
+			 *
+			 * If, however, it's not possible to resample (no irqfd resampler
+			 * registered for this irq), then unconditionally inject this
+			 * pending interrupt into the guest, so the guest will not miss
+			 * an interrupt, although may get an extra unwanted interrupt.
+			 */
+			if (kvm_notify_irqfd_resampler(ioapic->kvm, KVM_IRQCHIP_IOAPIC, index))
+				ioapic->irr &= ~(1 << index);
+			else
+				ioapic_service(ioapic, index, false);
+		}
 		if (e->fields.delivery_mode == APIC_DM_FIXED) {
 			struct kvm_lapic_irq irq;
 
diff --git a/arch/x86/kvm/kvm_onhyperv.h b/arch/x86/kvm/kvm_onhyperv.h
index 287e98ef9df3..6272dabec02d 100644
--- a/arch/x86/kvm/kvm_onhyperv.h
+++ b/arch/x86/kvm/kvm_onhyperv.h
@@ -12,6 +12,11 @@ int hv_remote_flush_tlb_with_range(struct kvm *kvm,
 int hv_remote_flush_tlb(struct kvm *kvm);
 void hv_track_root_tdp(struct kvm_vcpu *vcpu, hpa_t root_tdp);
 #else /* !CONFIG_HYPERV */
+static inline int hv_remote_flush_tlb(struct kvm *kvm)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline void hv_track_root_tdp(struct kvm_vcpu *vcpu, hpa_t root_tdp)
 {
 }
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index c25aeb550cd9..69ae5e1b3120 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -12,6 +12,7 @@
 #include <linux/kvm_host.h>
 #include <linux/kernel.h>
 #include <linux/highmem.h>
+#include <linux/psp.h>
 #include <linux/psp-sev.h>
 #include <linux/pagemap.h>
 #include <linux/swap.h>
@@ -1767,18 +1768,20 @@ int sev_vm_move_enc_context_from(struct kvm *kvm, unsigned int source_fd)
 {
 	struct kvm_sev_info *dst_sev = &to_kvm_svm(kvm)->sev_info;
 	struct kvm_sev_info *src_sev, *cg_cleanup_sev;
-	struct file *source_kvm_file;
+	struct fd f = fdget(source_fd);
 	struct kvm *source_kvm;
 	bool charged = false;
 	int ret;
 
-	source_kvm_file = fget(source_fd);
-	if (!file_is_kvm(source_kvm_file)) {
+	if (!f.file)
+		return -EBADF;
+
+	if (!file_is_kvm(f.file)) {
 		ret = -EBADF;
 		goto out_fput;
 	}
 
-	source_kvm = source_kvm_file->private_data;
+	source_kvm = f.file->private_data;
 	ret = sev_lock_two_vms(kvm, source_kvm);
 	if (ret)
 		goto out_fput;
@@ -1828,8 +1831,7 @@ out_dst_cgroup:
 out_unlock:
 	sev_unlock_two_vms(kvm, source_kvm);
 out_fput:
-	if (source_kvm_file)
-		fput(source_kvm_file);
+	fdput(f);
 	return ret;
 }
 
@@ -2046,18 +2048,20 @@ failed:
 
 int sev_vm_copy_enc_context_from(struct kvm *kvm, unsigned int source_fd)
 {
-	struct file *source_kvm_file;
+	struct fd f = fdget(source_fd);
 	struct kvm *source_kvm;
 	struct kvm_sev_info *source_sev, *mirror_sev;
 	int ret;
 
-	source_kvm_file = fget(source_fd);
-	if (!file_is_kvm(source_kvm_file)) {
+	if (!f.file)
+		return -EBADF;
+
+	if (!file_is_kvm(f.file)) {
 		ret = -EBADF;
 		goto e_source_fput;
 	}
 
-	source_kvm = source_kvm_file->private_data;
+	source_kvm = f.file->private_data;
 	ret = sev_lock_two_vms(kvm, source_kvm);
 	if (ret)
 		goto e_source_fput;
@@ -2103,8 +2107,7 @@ int sev_vm_copy_enc_context_from(struct kvm *kvm, unsigned int source_fd)
 e_unlock:
 	sev_unlock_two_vms(kvm, source_kvm);
 e_source_fput:
-	if (source_kvm_file)
-		fput(source_kvm_file);
+	fdput(f);
 	return ret;
 }
 
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 424fcdba4c78..a1b08359769b 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -3733,7 +3733,7 @@ static void svm_enable_nmi_window(struct kvm_vcpu *vcpu)
 	svm->vmcb->save.rflags |= (X86_EFLAGS_TF | X86_EFLAGS_RF);
 }
 
-static void svm_flush_tlb_current(struct kvm_vcpu *vcpu)
+static void svm_flush_tlb_asid(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
@@ -3757,6 +3757,37 @@ static void svm_flush_tlb_current(struct kvm_vcpu *vcpu)
 		svm->current_vmcb->asid_generation--;
 }
 
+static void svm_flush_tlb_current(struct kvm_vcpu *vcpu)
+{
+	hpa_t root_tdp = vcpu->arch.mmu->root.hpa;
+
+	/*
+	 * When running on Hyper-V with EnlightenedNptTlb enabled, explicitly
+	 * flush the NPT mappings via hypercall as flushing the ASID only
+	 * affects virtual to physical mappings, it does not invalidate guest
+	 * physical to host physical mappings.
+	 */
+	if (svm_hv_is_enlightened_tlb_enabled(vcpu) && VALID_PAGE(root_tdp))
+		hyperv_flush_guest_mapping(root_tdp);
+
+	svm_flush_tlb_asid(vcpu);
+}
+
+static void svm_flush_tlb_all(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * When running on Hyper-V with EnlightenedNptTlb enabled, remote TLB
+	 * flushes should be routed to hv_remote_flush_tlb() without requesting
+	 * a "regular" remote flush.  Reaching this point means either there's
+	 * a KVM bug or a prior hv_remote_flush_tlb() call failed, both of
+	 * which might be fatal to the guest.  Yell, but try to recover.
+	 */
+	if (WARN_ON_ONCE(svm_hv_is_enlightened_tlb_enabled(vcpu)))
+		hv_remote_flush_tlb(vcpu->kvm);
+
+	svm_flush_tlb_asid(vcpu);
+}
+
 static void svm_flush_tlb_gva(struct kvm_vcpu *vcpu, gva_t gva)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -4749,10 +4780,10 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
 	.set_rflags = svm_set_rflags,
 	.get_if_flag = svm_get_if_flag,
 
-	.flush_tlb_all = svm_flush_tlb_current,
+	.flush_tlb_all = svm_flush_tlb_all,
 	.flush_tlb_current = svm_flush_tlb_current,
 	.flush_tlb_gva = svm_flush_tlb_gva,
-	.flush_tlb_guest = svm_flush_tlb_current,
+	.flush_tlb_guest = svm_flush_tlb_asid,
 
 	.vcpu_pre_run = svm_vcpu_pre_run,
 	.vcpu_run = svm_vcpu_run,
diff --git a/arch/x86/kvm/svm/svm_onhyperv.h b/arch/x86/kvm/svm/svm_onhyperv.h
index cff838f15db5..786d46d73a8e 100644
--- a/arch/x86/kvm/svm/svm_onhyperv.h
+++ b/arch/x86/kvm/svm/svm_onhyperv.h
@@ -6,6 +6,8 @@
 #ifndef __ARCH_X86_KVM_SVM_ONHYPERV_H__
 #define __ARCH_X86_KVM_SVM_ONHYPERV_H__
 
+#include <asm/mshyperv.h>
+
 #if IS_ENABLED(CONFIG_HYPERV)
 
 #include "kvm_onhyperv.h"
@@ -15,6 +17,14 @@ static struct kvm_x86_ops svm_x86_ops;
 
 int svm_hv_enable_l2_tlb_flush(struct kvm_vcpu *vcpu);
 
+static inline bool svm_hv_is_enlightened_tlb_enabled(struct kvm_vcpu *vcpu)
+{
+	struct hv_vmcb_enlightenments *hve = &to_svm(vcpu)->vmcb->control.hv_enlightenments;
+
+	return ms_hyperv.nested_features & HV_X64_NESTED_ENLIGHTENED_TLB &&
+	       !!hve->hv_enlightenments_control.enlightened_npt_tlb;
+}
+
 static inline void svm_hv_init_vmcb(struct vmcb *vmcb)
 {
 	struct hv_vmcb_enlightenments *hve = &vmcb->control.hv_enlightenments;
@@ -80,6 +90,11 @@ static inline void svm_hv_update_vp_id(struct vmcb *vmcb, struct kvm_vcpu *vcpu)
 }
 #else
 
+static inline bool svm_hv_is_enlightened_tlb_enabled(struct kvm_vcpu *vcpu)
+{
+	return false;
+}
+
 static inline void svm_hv_init_vmcb(struct vmcb *vmcb)
 {
 }
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 1bc2b80273c9..768487611db7 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -3868,7 +3868,12 @@ static void nested_vmx_inject_exception_vmexit(struct kvm_vcpu *vcpu)
 		exit_qual = 0;
 	}
 
-	if (ex->has_error_code) {
+	/*
+	 * Unlike AMD's Paged Real Mode, which reports an error code on #PF
+	 * VM-Exits even if the CPU is in Real Mode, Intel VMX never sets the
+	 * "has error code" flags on VM-Exit if the CPU is in Real Mode.
+	 */
+	if (ex->has_error_code && is_protmode(vcpu)) {
 		/*
 		 * Intel CPUs do not generate error codes with bits 31:16 set,
 		 * and more importantly VMX disallows setting bits 31:16 in the
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 07ba937bdb6f..2b1d82647195 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4434,6 +4434,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_VAPIC:
 	case KVM_CAP_ENABLE_CAP:
 	case KVM_CAP_VM_DISABLE_NX_HUGE_PAGES:
+	case KVM_CAP_IRQFD_RESAMPLE:
 		r = 1;
 		break;
 	case KVM_CAP_EXIT_HYPERCALL:
@@ -8905,6 +8906,8 @@ restart:
 	}
 
 	if (ctxt->have_exception) {
+		WARN_ON_ONCE(vcpu->mmio_needed && !vcpu->mmio_is_write);
+		vcpu->mmio_needed = false;
 		r = 1;
 		inject_emulated_exception(vcpu);
 	} else if (vcpu->arch.pio.count) {
@@ -9908,13 +9911,20 @@ int kvm_check_nested_events(struct kvm_vcpu *vcpu)
 
 static void kvm_inject_exception(struct kvm_vcpu *vcpu)
 {
+	/*
+	 * Suppress the error code if the vCPU is in Real Mode, as Real Mode
+	 * exceptions don't report error codes.  The presence of an error code
+	 * is carried with the exception and only stripped when the exception
+	 * is injected as intercepted #PF VM-Exits for AMD's Paged Real Mode do
+	 * report an error code despite the CPU being in Real Mode.
+	 */
+	vcpu->arch.exception.has_error_code &= is_protmode(vcpu);
+
 	trace_kvm_inj_exception(vcpu->arch.exception.vector,
 				vcpu->arch.exception.has_error_code,
 				vcpu->arch.exception.error_code,
 				vcpu->arch.exception.injected);
 
-	if (vcpu->arch.exception.error_code && !is_protmode(vcpu))
-		vcpu->arch.exception.error_code = false;
 	static_call(kvm_x86_inject_exception)(vcpu);
 }
 
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 4f1a40a86534..01932af64193 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -71,6 +71,6 @@ ifneq ($(CONFIG_GENERIC_CSUM),y)
 endif
         lib-y += clear_page_64.o copy_page_64.o
         lib-y += memmove_64.o memset_64.o
-        lib-y += copy_user_64.o
+        lib-y += copy_user_64.o copy_user_uncached_64.o
 	lib-y += cmpxchg16b_emu.o
 endif
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index ecbfb4dd3b01..f74a3e704a1c 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -57,134 +57,85 @@ EXPORT_SYMBOL_GPL(clear_page_erms)
  * Input:
  * rdi destination
  * rcx count
+ * rax is zero
  *
  * Output:
  * rcx: uncleared bytes or 0 if successful.
  */
-SYM_FUNC_START(clear_user_original)
-	/*
-	 * Copy only the lower 32 bits of size as that is enough to handle the rest bytes,
-	 * i.e., no need for a 'q' suffix and thus a REX prefix.
-	 */
-	mov %ecx,%eax
-	shr $3,%rcx
-	jz .Lrest_bytes
+SYM_FUNC_START(rep_stos_alternative)
+	cmpq $64,%rcx
+	jae .Lunrolled
 
-	# do the qwords first
-	.p2align 4
-.Lqwords:
-	movq $0,(%rdi)
-	lea 8(%rdi),%rdi
-	dec %rcx
-	jnz .Lqwords
+	cmp $8,%ecx
+	jae .Lword
 
-.Lrest_bytes:
-	and $7,  %eax
-	jz .Lexit
+	testl %ecx,%ecx
+	je .Lexit
 
-	# now do the rest bytes
-.Lbytes:
-	movb $0,(%rdi)
+.Lclear_user_tail:
+0:	movb %al,(%rdi)
 	inc %rdi
-	dec %eax
-	jnz .Lbytes
-
+	dec %rcx
+	jnz .Lclear_user_tail
 .Lexit:
-	/*
-	 * %rax still needs to be cleared in the exception case because this function is called
-	 * from inline asm and the compiler expects %rax to be zero when exiting the inline asm,
-	 * in case it might reuse it somewhere.
-	 */
-        xor %eax,%eax
-        RET
-
-.Lqwords_exception:
-        # convert remaining qwords back into bytes to return to caller
-        shl $3, %rcx
-        and $7, %eax
-        add %rax,%rcx
-        jmp .Lexit
-
-.Lbytes_exception:
-        mov %eax,%ecx
-        jmp .Lexit
-
-        _ASM_EXTABLE_UA(.Lqwords, .Lqwords_exception)
-        _ASM_EXTABLE_UA(.Lbytes, .Lbytes_exception)
-SYM_FUNC_END(clear_user_original)
-EXPORT_SYMBOL(clear_user_original)
-
-/*
- * Alternative clear user-space when CPU feature X86_FEATURE_REP_GOOD is
- * present.
- * Input:
- * rdi destination
- * rcx count
- *
- * Output:
- * rcx: uncleared bytes or 0 if successful.
- */
-SYM_FUNC_START(clear_user_rep_good)
-	# call the original thing for less than a cacheline
-	cmp $64, %rcx
-	jb clear_user_original
-
-.Lprep:
-	# copy lower 32-bits for rest bytes
-	mov %ecx, %edx
-	shr $3, %rcx
-	jz .Lrep_good_rest_bytes
-
-.Lrep_good_qwords:
-	rep stosq
-
-.Lrep_good_rest_bytes:
-	and $7, %edx
-	jz .Lrep_good_exit
-
-.Lrep_good_bytes:
-	mov %edx, %ecx
-	rep stosb
-
-.Lrep_good_exit:
-	# see .Lexit comment above
-	xor %eax, %eax
 	RET
 
-.Lrep_good_qwords_exception:
-	# convert remaining qwords back into bytes to return to caller
-	shl $3, %rcx
-	and $7, %edx
-	add %rdx, %rcx
-	jmp .Lrep_good_exit
+	_ASM_EXTABLE_UA( 0b, .Lexit)
 
-	_ASM_EXTABLE_UA(.Lrep_good_qwords, .Lrep_good_qwords_exception)
-	_ASM_EXTABLE_UA(.Lrep_good_bytes, .Lrep_good_exit)
-SYM_FUNC_END(clear_user_rep_good)
-EXPORT_SYMBOL(clear_user_rep_good)
+.Lword:
+1:	movq %rax,(%rdi)
+	addq $8,%rdi
+	sub $8,%ecx
+	je .Lexit
+	cmp $8,%ecx
+	jae .Lword
+	jmp .Lclear_user_tail
 
-/*
- * Alternative clear user-space when CPU feature X86_FEATURE_ERMS is present.
- * Input:
- * rdi destination
- * rcx count
- *
- * Output:
- * rcx: uncleared bytes or 0 if successful.
- *
- */
-SYM_FUNC_START(clear_user_erms)
-	# call the original thing for less than a cacheline
-	cmp $64, %rcx
-	jb clear_user_original
-
-.Lerms_bytes:
-	rep stosb
-
-.Lerms_exit:
-	xorl %eax,%eax
+	.p2align 4
+.Lunrolled:
+10:	movq %rax,(%rdi)
+11:	movq %rax,8(%rdi)
+12:	movq %rax,16(%rdi)
+13:	movq %rax,24(%rdi)
+14:	movq %rax,32(%rdi)
+15:	movq %rax,40(%rdi)
+16:	movq %rax,48(%rdi)
+17:	movq %rax,56(%rdi)
+	addq $64,%rdi
+	subq $64,%rcx
+	cmpq $64,%rcx
+	jae .Lunrolled
+	cmpl $8,%ecx
+	jae .Lword
+	testl %ecx,%ecx
+	jne .Lclear_user_tail
 	RET
 
-	_ASM_EXTABLE_UA(.Lerms_bytes, .Lerms_exit)
-SYM_FUNC_END(clear_user_erms)
-EXPORT_SYMBOL(clear_user_erms)
+	/*
+	 * If we take an exception on any of the
+	 * word stores, we know that %rcx isn't zero,
+	 * so we can just go to the tail clearing to
+	 * get the exact count.
+	 *
+	 * The unrolled case might end up clearing
+	 * some bytes twice. Don't care.
+	 *
+	 * We could use the value in %rdi to avoid
+	 * a second fault on the exact count case,
+	 * but do we really care? No.
+	 *
+	 * Finally, we could try to align %rdi at the
+	 * top of the unrolling. But unaligned stores
+	 * just aren't that common or expensive.
+	 */
+	_ASM_EXTABLE_UA( 1b, .Lclear_user_tail)
+	_ASM_EXTABLE_UA(10b, .Lclear_user_tail)
+	_ASM_EXTABLE_UA(11b, .Lclear_user_tail)
+	_ASM_EXTABLE_UA(12b, .Lclear_user_tail)
+	_ASM_EXTABLE_UA(13b, .Lclear_user_tail)
+	_ASM_EXTABLE_UA(14b, .Lclear_user_tail)
+	_ASM_EXTABLE_UA(15b, .Lclear_user_tail)
+	_ASM_EXTABLE_UA(16b, .Lclear_user_tail)
+	_ASM_EXTABLE_UA(17b, .Lclear_user_tail)
+SYM_FUNC_END(rep_stos_alternative)
+EXPORT_SYMBOL(rep_stos_alternative)
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 9dec1b38a98f..4fc5c2de2de4 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -7,404 +7,108 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/current.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/cpufeatures.h>
-#include <asm/alternative.h>
 #include <asm/asm.h>
-#include <asm/smap.h>
 #include <asm/export.h>
-#include <asm/trapnr.h>
-
-.macro ALIGN_DESTINATION
-	/* check for bad alignment of destination */
-	movl %edi,%ecx
-	andl $7,%ecx
-	jz 102f				/* already aligned */
-	subl $8,%ecx
-	negl %ecx
-	subl %ecx,%edx
-100:	movb (%rsi),%al
-101:	movb %al,(%rdi)
-	incq %rsi
-	incq %rdi
-	decl %ecx
-	jnz 100b
-102:
-
-	_ASM_EXTABLE_CPY(100b, .Lcopy_user_handle_align)
-	_ASM_EXTABLE_CPY(101b, .Lcopy_user_handle_align)
-.endm
 
 /*
- * copy_user_generic_unrolled - memory copy with exception handling.
- * This version is for CPUs like P4 that don't have efficient micro
- * code for rep movsq
- *
- * Input:
- * rdi destination
- * rsi source
- * rdx count
- *
- * Output:
- * eax uncopied bytes or 0 if successful.
- */
-SYM_FUNC_START(copy_user_generic_unrolled)
-	ASM_STAC
-	cmpl $8,%edx
-	jb .Lcopy_user_short_string_bytes
-	ALIGN_DESTINATION
-	movl %edx,%ecx
-	andl $63,%edx
-	shrl $6,%ecx
-	jz copy_user_short_string
-1:	movq (%rsi),%r8
-2:	movq 1*8(%rsi),%r9
-3:	movq 2*8(%rsi),%r10
-4:	movq 3*8(%rsi),%r11
-5:	movq %r8,(%rdi)
-6:	movq %r9,1*8(%rdi)
-7:	movq %r10,2*8(%rdi)
-8:	movq %r11,3*8(%rdi)
-9:	movq 4*8(%rsi),%r8
-10:	movq 5*8(%rsi),%r9
-11:	movq 6*8(%rsi),%r10
-12:	movq 7*8(%rsi),%r11
-13:	movq %r8,4*8(%rdi)
-14:	movq %r9,5*8(%rdi)
-15:	movq %r10,6*8(%rdi)
-16:	movq %r11,7*8(%rdi)
-	leaq 64(%rsi),%rsi
-	leaq 64(%rdi),%rdi
-	decl %ecx
-	jnz 1b
-	jmp copy_user_short_string
-
-30:	shll $6,%ecx
-	addl %ecx,%edx
-	jmp .Lcopy_user_handle_tail
-
-	_ASM_EXTABLE_CPY(1b, 30b)
-	_ASM_EXTABLE_CPY(2b, 30b)
-	_ASM_EXTABLE_CPY(3b, 30b)
-	_ASM_EXTABLE_CPY(4b, 30b)
-	_ASM_EXTABLE_CPY(5b, 30b)
-	_ASM_EXTABLE_CPY(6b, 30b)
-	_ASM_EXTABLE_CPY(7b, 30b)
-	_ASM_EXTABLE_CPY(8b, 30b)
-	_ASM_EXTABLE_CPY(9b, 30b)
-	_ASM_EXTABLE_CPY(10b, 30b)
-	_ASM_EXTABLE_CPY(11b, 30b)
-	_ASM_EXTABLE_CPY(12b, 30b)
-	_ASM_EXTABLE_CPY(13b, 30b)
-	_ASM_EXTABLE_CPY(14b, 30b)
-	_ASM_EXTABLE_CPY(15b, 30b)
-	_ASM_EXTABLE_CPY(16b, 30b)
-SYM_FUNC_END(copy_user_generic_unrolled)
-EXPORT_SYMBOL(copy_user_generic_unrolled)
-
-/* Some CPUs run faster using the string copy instructions.
- * This is also a lot simpler. Use them when possible.
- *
- * Only 4GB of copy is supported. This shouldn't be a problem
- * because the kernel normally only writes from/to page sized chunks
- * even if user space passed a longer buffer.
- * And more would be dangerous because both Intel and AMD have
- * errata with rep movsq > 4GB. If someone feels the need to fix
- * this please consider this.
+ * rep_movs_alternative - memory copy with exception handling.
+ * This version is for CPUs that don't have FSRM (Fast Short Rep Movs)
  *
  * Input:
  * rdi destination
  * rsi source
- * rdx count
+ * rcx count
  *
  * Output:
- * eax uncopied bytes or 0 if successful.
- */
-SYM_FUNC_START(copy_user_generic_string)
-	ASM_STAC
-	cmpl $8,%edx
-	jb 2f		/* less than 8 bytes, go to byte copy loop */
-	ALIGN_DESTINATION
-	movl %edx,%ecx
-	shrl $3,%ecx
-	andl $7,%edx
-1:	rep movsq
-2:	movl %edx,%ecx
-3:	rep movsb
-	xorl %eax,%eax
-	ASM_CLAC
-	RET
-
-11:	leal (%rdx,%rcx,8),%ecx
-12:	movl %ecx,%edx		/* ecx is zerorest also */
-	jmp .Lcopy_user_handle_tail
-
-	_ASM_EXTABLE_CPY(1b, 11b)
-	_ASM_EXTABLE_CPY(3b, 12b)
-SYM_FUNC_END(copy_user_generic_string)
-EXPORT_SYMBOL(copy_user_generic_string)
-
-/*
- * Some CPUs are adding enhanced REP MOVSB/STOSB instructions.
- * It's recommended to use enhanced REP MOVSB/STOSB if it's enabled.
- *
- * Input:
- * rdi destination
- * rsi source
- * rdx count
+ * rcx uncopied bytes or 0 if successful.
  *
- * Output:
- * eax uncopied bytes or 0 if successful.
+ * NOTE! The calling convention is very intentionally the same as
+ * for 'rep movs', so that we can rewrite the function call with
+ * just a plain 'rep movs' on machines that have FSRM.  But to make
+ * it simpler for us, we can clobber rsi/rdi and rax/r8-r11 freely.
  */
-SYM_FUNC_START(copy_user_enhanced_fast_string)
-	ASM_STAC
-	/* CPUs without FSRM should avoid rep movsb for short copies */
-	ALTERNATIVE "cmpl $64, %edx; jb copy_user_short_string", "", X86_FEATURE_FSRM
-	movl %edx,%ecx
-1:	rep movsb
-	xorl %eax,%eax
-	ASM_CLAC
+SYM_FUNC_START(rep_movs_alternative)
+	cmpq $64,%rcx
+	jae .Lunrolled
+
+	cmp $8,%ecx
+	jae .Lword
+
+	testl %ecx,%ecx
+	je .Lexit
+
+.Lcopy_user_tail:
+0:	movb (%rsi),%al
+1:	movb %al,(%rdi)
+	inc %rdi
+	inc %rsi
+	dec %rcx
+	jne .Lcopy_user_tail
+.Lexit:
 	RET
 
-12:	movl %ecx,%edx		/* ecx is zerorest also */
-	jmp .Lcopy_user_handle_tail
-
-	_ASM_EXTABLE_CPY(1b, 12b)
-SYM_FUNC_END(copy_user_enhanced_fast_string)
-EXPORT_SYMBOL(copy_user_enhanced_fast_string)
-
-/*
- * Try to copy last bytes and clear the rest if needed.
- * Since protection fault in copy_from/to_user is not a normal situation,
- * it is not necessary to optimize tail handling.
- * Don't try to copy the tail if machine check happened
- *
- * Input:
- * eax trap number written by ex_handler_copy()
- * rdi destination
- * rsi source
- * rdx count
- *
- * Output:
- * eax uncopied bytes or 0 if successful.
- */
-SYM_CODE_START_LOCAL(.Lcopy_user_handle_tail)
-	cmp $X86_TRAP_MC,%eax
-	je 3f
-
-	movl %edx,%ecx
-1:	rep movsb
-2:	mov %ecx,%eax
-	ASM_CLAC
+	_ASM_EXTABLE_UA( 0b, .Lexit)
+	_ASM_EXTABLE_UA( 1b, .Lexit)
+
+	.p2align 4
+.Lword:
+2:	movq (%rsi),%rax
+3:	movq %rax,(%rdi)
+	addq $8,%rsi
+	addq $8,%rdi
+	sub $8,%ecx
+	je .Lexit
+	cmp $8,%ecx
+	jae .Lword
+	jmp .Lcopy_user_tail
+
+	_ASM_EXTABLE_UA( 2b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA( 3b, .Lcopy_user_tail)
+
+	.p2align 4
+.Lunrolled:
+10:	movq (%rsi),%r8
+11:	movq 8(%rsi),%r9
+12:	movq 16(%rsi),%r10
+13:	movq 24(%rsi),%r11
+14:	movq %r8,(%rdi)
+15:	movq %r9,8(%rdi)
+16:	movq %r10,16(%rdi)
+17:	movq %r11,24(%rdi)
+20:	movq 32(%rsi),%r8
+21:	movq 40(%rsi),%r9
+22:	movq 48(%rsi),%r10
+23:	movq 56(%rsi),%r11
+24:	movq %r8,32(%rdi)
+25:	movq %r9,40(%rdi)
+26:	movq %r10,48(%rdi)
+27:	movq %r11,56(%rdi)
+	addq $64,%rsi
+	addq $64,%rdi
+	subq $64,%rcx
+	cmpq $64,%rcx
+	jae .Lunrolled
+	cmpl $8,%ecx
+	jae .Lword
+	testl %ecx,%ecx
+	jne .Lcopy_user_tail
 	RET
 
-3:
-	movl %edx,%eax
-	ASM_CLAC
-	RET
-
-	_ASM_EXTABLE_CPY(1b, 2b)
-
-.Lcopy_user_handle_align:
-	addl %ecx,%edx			/* ecx is zerorest also */
-	jmp .Lcopy_user_handle_tail
-
-SYM_CODE_END(.Lcopy_user_handle_tail)
-
-/*
- * Finish memcpy of less than 64 bytes.  #AC should already be set.
- *
- * Input:
- * rdi destination
- * rsi source
- * rdx count (< 64)
- *
- * Output:
- * eax uncopied bytes or 0 if successful.
- */
-SYM_CODE_START_LOCAL(copy_user_short_string)
-	movl %edx,%ecx
-	andl $7,%edx
-	shrl $3,%ecx
-	jz .Lcopy_user_short_string_bytes
-18:	movq (%rsi),%r8
-19:	movq %r8,(%rdi)
-	leaq 8(%rsi),%rsi
-	leaq 8(%rdi),%rdi
-	decl %ecx
-	jnz 18b
-.Lcopy_user_short_string_bytes:
-	andl %edx,%edx
-	jz 23f
-	movl %edx,%ecx
-21:	movb (%rsi),%al
-22:	movb %al,(%rdi)
-	incq %rsi
-	incq %rdi
-	decl %ecx
-	jnz 21b
-23:	xor %eax,%eax
-	ASM_CLAC
-	RET
-
-40:	leal (%rdx,%rcx,8),%edx
-	jmp 60f
-50:	movl %ecx,%edx		/* ecx is zerorest also */
-60:	jmp .Lcopy_user_handle_tail
-
-	_ASM_EXTABLE_CPY(18b, 40b)
-	_ASM_EXTABLE_CPY(19b, 40b)
-	_ASM_EXTABLE_CPY(21b, 50b)
-	_ASM_EXTABLE_CPY(22b, 50b)
-SYM_CODE_END(copy_user_short_string)
-
-/*
- * copy_user_nocache - Uncached memory copy with exception handling
- * This will force destination out of cache for more performance.
- *
- * Note: Cached memory copy is used when destination or size is not
- * naturally aligned. That is:
- *  - Require 8-byte alignment when size is 8 bytes or larger.
- *  - Require 4-byte alignment when size is 4 bytes.
- */
-SYM_FUNC_START(__copy_user_nocache)
-	ASM_STAC
-
-	/* If size is less than 8 bytes, go to 4-byte copy */
-	cmpl $8,%edx
-	jb .L_4b_nocache_copy_entry
-
-	/* If destination is not 8-byte aligned, "cache" copy to align it */
-	ALIGN_DESTINATION
-
-	/* Set 4x8-byte copy count and remainder */
-	movl %edx,%ecx
-	andl $63,%edx
-	shrl $6,%ecx
-	jz .L_8b_nocache_copy_entry	/* jump if count is 0 */
-
-	/* Perform 4x8-byte nocache loop-copy */
-.L_4x8b_nocache_copy_loop:
-1:	movq (%rsi),%r8
-2:	movq 1*8(%rsi),%r9
-3:	movq 2*8(%rsi),%r10
-4:	movq 3*8(%rsi),%r11
-5:	movnti %r8,(%rdi)
-6:	movnti %r9,1*8(%rdi)
-7:	movnti %r10,2*8(%rdi)
-8:	movnti %r11,3*8(%rdi)
-9:	movq 4*8(%rsi),%r8
-10:	movq 5*8(%rsi),%r9
-11:	movq 6*8(%rsi),%r10
-12:	movq 7*8(%rsi),%r11
-13:	movnti %r8,4*8(%rdi)
-14:	movnti %r9,5*8(%rdi)
-15:	movnti %r10,6*8(%rdi)
-16:	movnti %r11,7*8(%rdi)
-	leaq 64(%rsi),%rsi
-	leaq 64(%rdi),%rdi
-	decl %ecx
-	jnz .L_4x8b_nocache_copy_loop
-
-	/* Set 8-byte copy count and remainder */
-.L_8b_nocache_copy_entry:
-	movl %edx,%ecx
-	andl $7,%edx
-	shrl $3,%ecx
-	jz .L_4b_nocache_copy_entry	/* jump if count is 0 */
-
-	/* Perform 8-byte nocache loop-copy */
-.L_8b_nocache_copy_loop:
-20:	movq (%rsi),%r8
-21:	movnti %r8,(%rdi)
-	leaq 8(%rsi),%rsi
-	leaq 8(%rdi),%rdi
-	decl %ecx
-	jnz .L_8b_nocache_copy_loop
-
-	/* If no byte left, we're done */
-.L_4b_nocache_copy_entry:
-	andl %edx,%edx
-	jz .L_finish_copy
-
-	/* If destination is not 4-byte aligned, go to byte copy: */
-	movl %edi,%ecx
-	andl $3,%ecx
-	jnz .L_1b_cache_copy_entry
-
-	/* Set 4-byte copy count (1 or 0) and remainder */
-	movl %edx,%ecx
-	andl $3,%edx
-	shrl $2,%ecx
-	jz .L_1b_cache_copy_entry	/* jump if count is 0 */
-
-	/* Perform 4-byte nocache copy: */
-30:	movl (%rsi),%r8d
-31:	movnti %r8d,(%rdi)
-	leaq 4(%rsi),%rsi
-	leaq 4(%rdi),%rdi
-
-	/* If no bytes left, we're done: */
-	andl %edx,%edx
-	jz .L_finish_copy
-
-	/* Perform byte "cache" loop-copy for the remainder */
-.L_1b_cache_copy_entry:
-	movl %edx,%ecx
-.L_1b_cache_copy_loop:
-40:	movb (%rsi),%al
-41:	movb %al,(%rdi)
-	incq %rsi
-	incq %rdi
-	decl %ecx
-	jnz .L_1b_cache_copy_loop
-
-	/* Finished copying; fence the prior stores */
-.L_finish_copy:
-	xorl %eax,%eax
-	ASM_CLAC
-	sfence
-	RET
-
-.L_fixup_4x8b_copy:
-	shll $6,%ecx
-	addl %ecx,%edx
-	jmp .L_fixup_handle_tail
-.L_fixup_8b_copy:
-	lea (%rdx,%rcx,8),%rdx
-	jmp .L_fixup_handle_tail
-.L_fixup_4b_copy:
-	lea (%rdx,%rcx,4),%rdx
-	jmp .L_fixup_handle_tail
-.L_fixup_1b_copy:
-	movl %ecx,%edx
-.L_fixup_handle_tail:
-	sfence
-	jmp .Lcopy_user_handle_tail
-
-	_ASM_EXTABLE_CPY(1b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(2b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(3b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(4b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(5b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(6b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(7b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(8b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(9b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(10b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(11b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(12b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(13b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(14b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(15b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(16b, .L_fixup_4x8b_copy)
-	_ASM_EXTABLE_CPY(20b, .L_fixup_8b_copy)
-	_ASM_EXTABLE_CPY(21b, .L_fixup_8b_copy)
-	_ASM_EXTABLE_CPY(30b, .L_fixup_4b_copy)
-	_ASM_EXTABLE_CPY(31b, .L_fixup_4b_copy)
-	_ASM_EXTABLE_CPY(40b, .L_fixup_1b_copy)
-	_ASM_EXTABLE_CPY(41b, .L_fixup_1b_copy)
-SYM_FUNC_END(__copy_user_nocache)
-EXPORT_SYMBOL(__copy_user_nocache)
+	_ASM_EXTABLE_UA(10b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(11b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(12b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(13b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(14b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(15b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(16b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(17b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(20b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(21b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(22b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(23b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(24b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(25b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(26b, .Lcopy_user_tail)
+	_ASM_EXTABLE_UA(27b, .Lcopy_user_tail)
+SYM_FUNC_END(rep_movs_alternative)
+EXPORT_SYMBOL(rep_movs_alternative)
diff --git a/arch/x86/lib/copy_user_uncached_64.S b/arch/x86/lib/copy_user_uncached_64.S
new file mode 100644
index 000000000000..5c5f38d32672
--- /dev/null
+++ b/arch/x86/lib/copy_user_uncached_64.S
@@ -0,0 +1,242 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2023 Linus Torvalds <torvalds@linux-foundation.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+#include <asm/export.h>
+
+/*
+ * copy_user_nocache - Uncached memory copy with exception handling
+ *
+ * This copies from user space into kernel space, but the kernel
+ * space accesses can take a machine check exception, so they too
+ * need exception handling.
+ *
+ * Note: only 32-bit and 64-bit stores have non-temporal versions,
+ * and we only use aligned versions. Any unaligned parts at the
+ * start or end of the copy will be done using normal cached stores.
+ *
+ * Input:
+ * rdi destination
+ * rsi source
+ * edx count
+ *
+ * Output:
+ * rax uncopied bytes or 0 if successful.
+ */
+SYM_FUNC_START(__copy_user_nocache)
+	/* If destination is not 7-byte aligned, we'll have to align it */
+	testb $7,%dil
+	jne .Lalign
+
+.Lis_aligned:
+	cmp $64,%edx
+	jb .Lquadwords
+
+	.p2align 4,0x90
+.Lunrolled:
+10:	movq (%rsi),%r8
+11:	movq 8(%rsi),%r9
+12:	movq 16(%rsi),%r10
+13:	movq 24(%rsi),%r11
+20:	movnti %r8,(%rdi)
+21:	movnti %r9,8(%rdi)
+22:	movnti %r10,16(%rdi)
+23:	movnti %r11,24(%rdi)
+30:	movq 32(%rsi),%r8
+31:	movq 40(%rsi),%r9
+32:	movq 48(%rsi),%r10
+33:	movq 56(%rsi),%r11
+40:	movnti %r8,32(%rdi)
+41:	movnti %r9,40(%rdi)
+42:	movnti %r10,48(%rdi)
+43:	movnti %r11,56(%rdi)
+
+	addq $64,%rsi
+	addq $64,%rdi
+	sub $64,%edx
+	cmp $64,%edx
+	jae .Lunrolled
+
+/*
+ * First set of user mode loads have been done
+ * without any stores, so if they fail, we can
+ * just try the non-unrolled loop.
+ */
+_ASM_EXTABLE_UA(10b, .Lquadwords)
+_ASM_EXTABLE_UA(11b, .Lquadwords)
+_ASM_EXTABLE_UA(12b, .Lquadwords)
+_ASM_EXTABLE_UA(13b, .Lquadwords)
+
+/*
+ * The second set of user mode loads have been
+ * done with 32 bytes stored to the destination,
+ * so we need to take that into account before
+ * falling back to the unrolled loop.
+ */
+_ASM_EXTABLE_UA(30b, .Lfixup32)
+_ASM_EXTABLE_UA(31b, .Lfixup32)
+_ASM_EXTABLE_UA(32b, .Lfixup32)
+_ASM_EXTABLE_UA(33b, .Lfixup32)
+
+/*
+ * An exception on a write means that we're
+ * done, but we need to update the count
+ * depending on where in the unrolled loop
+ * we were.
+ */
+_ASM_EXTABLE_UA(20b, .Ldone0)
+_ASM_EXTABLE_UA(21b, .Ldone8)
+_ASM_EXTABLE_UA(22b, .Ldone16)
+_ASM_EXTABLE_UA(23b, .Ldone24)
+_ASM_EXTABLE_UA(40b, .Ldone32)
+_ASM_EXTABLE_UA(41b, .Ldone40)
+_ASM_EXTABLE_UA(42b, .Ldone48)
+_ASM_EXTABLE_UA(43b, .Ldone56)
+
+.Lquadwords:
+	cmp $8,%edx
+	jb .Llong
+50:	movq (%rsi),%rax
+51:	movnti %rax,(%rdi)
+	addq $8,%rsi
+	addq $8,%rdi
+	sub $8,%edx
+	jmp .Lquadwords
+
+/*
+ * If we fail on the last full quadword, we will
+ * not try to do any byte-wise cached accesses.
+ * We will try to do one more 4-byte uncached
+ * one, though.
+ */
+_ASM_EXTABLE_UA(50b, .Llast4)
+_ASM_EXTABLE_UA(51b, .Ldone0)
+
+.Llong:
+	test $4,%dl
+	je .Lword
+60:	movl (%rsi),%eax
+61:	movnti %eax,(%rdi)
+	addq $4,%rsi
+	addq $4,%rdi
+	sub $4,%edx
+.Lword:
+	sfence
+	test $2,%dl
+	je .Lbyte
+70:	movw (%rsi),%ax
+71:	movw %ax,(%rdi)
+	addq $2,%rsi
+	addq $2,%rdi
+	sub $2,%edx
+.Lbyte:
+	test $1,%dl
+	je .Ldone
+80:	movb (%rsi),%al
+81:	movb %al,(%rdi)
+	dec %edx
+.Ldone:
+	mov %edx,%eax
+	RET
+
+/*
+ * If we fail on the last four bytes, we won't
+ * bother with any fixups. It's dead, Jim. Note
+ * that there's no need for 'sfence' for any
+ * of this, since the exception will have been
+ * serializing.
+ */
+_ASM_EXTABLE_UA(60b, .Ldone)
+_ASM_EXTABLE_UA(61b, .Ldone)
+_ASM_EXTABLE_UA(70b, .Ldone)
+_ASM_EXTABLE_UA(71b, .Ldone)
+_ASM_EXTABLE_UA(80b, .Ldone)
+_ASM_EXTABLE_UA(81b, .Ldone)
+
+/*
+ * This is the "head needs aliging" case when
+ * the destination isn't 8-byte aligned. The
+ * 4-byte case can be done uncached, but any
+ * smaller alignment is done with regular stores.
+ */
+.Lalign:
+	test $1,%dil
+	je .Lalign_word
+	test %edx,%edx
+	je .Ldone
+90:	movb (%rsi),%al
+91:	movb %al,(%rdi)
+	inc %rsi
+	inc %rdi
+	dec %edx
+.Lalign_word:
+	test $2,%dil
+	je .Lalign_long
+	cmp $2,%edx
+	jb .Lbyte
+92:	movw (%rsi),%ax
+93:	movw %ax,(%rdi)
+	addq $2,%rsi
+	addq $2,%rdi
+	sub $2,%edx
+.Lalign_long:
+	test $4,%dil
+	je .Lis_aligned
+	cmp $4,%edx
+	jb .Lword
+94:	movl (%rsi),%eax
+95:	movnti %eax,(%rdi)
+	addq $4,%rsi
+	addq $4,%rdi
+	sub $4,%edx
+	jmp .Lis_aligned
+
+/*
+ * If we fail on the initial alignment accesses,
+ * we're all done. Again, no point in trying to
+ * do byte-by-byte probing if the 4-byte load
+ * fails - we're not doing any uncached accesses
+ * any more.
+ */
+_ASM_EXTABLE_UA(90b, .Ldone)
+_ASM_EXTABLE_UA(91b, .Ldone)
+_ASM_EXTABLE_UA(92b, .Ldone)
+_ASM_EXTABLE_UA(93b, .Ldone)
+_ASM_EXTABLE_UA(94b, .Ldone)
+_ASM_EXTABLE_UA(95b, .Ldone)
+
+/*
+ * Exception table fixups for faults in the middle
+ */
+.Ldone56: sub $8,%edx
+.Ldone48: sub $8,%edx
+.Ldone40: sub $8,%edx
+.Ldone32: sub $8,%edx
+.Ldone24: sub $8,%edx
+.Ldone16: sub $8,%edx
+.Ldone8: sub $8,%edx
+.Ldone0:
+	mov %edx,%eax
+	RET
+
+.Lfixup32:
+	addq $32,%rsi
+	addq $32,%rdi
+	sub $32,%edx
+	jmp .Lquadwords
+
+.Llast4:
+52:	movl (%rsi),%eax
+53:	movnti %eax,(%rdi)
+	sfence
+	sub $4,%edx
+	mov %edx,%eax
+	RET
+_ASM_EXTABLE_UA(52b, .Ldone0)
+_ASM_EXTABLE_UA(53b, .Ldone0)
+
+SYM_FUNC_END(__copy_user_nocache)
+EXPORT_SYMBOL(__copy_user_nocache)
diff --git a/arch/x86/lib/getuser.S b/arch/x86/lib/getuser.S
index b70d98d79a9d..b64a2bd1a1ef 100644
--- a/arch/x86/lib/getuser.S
+++ b/arch/x86/lib/getuser.S
@@ -37,22 +37,22 @@
 
 #define ASM_BARRIER_NOSPEC ALTERNATIVE "", "lfence", X86_FEATURE_LFENCE_RDTSC
 
-#ifdef CONFIG_X86_5LEVEL
-#define LOAD_TASK_SIZE_MINUS_N(n) \
-	ALTERNATIVE __stringify(mov $((1 << 47) - 4096 - (n)),%rdx), \
-		    __stringify(mov $((1 << 56) - 4096 - (n)),%rdx), X86_FEATURE_LA57
-#else
-#define LOAD_TASK_SIZE_MINUS_N(n) \
-	mov $(TASK_SIZE_MAX - (n)),%_ASM_DX
-#endif
+.macro check_range size:req
+.if IS_ENABLED(CONFIG_X86_64)
+	mov %rax, %rdx
+	sar $63, %rdx
+	or %rdx, %rax
+.else
+	cmp $TASK_SIZE_MAX-\size+1, %eax
+	jae .Lbad_get_user
+	sbb %edx, %edx		/* array_index_mask_nospec() */
+	and %edx, %eax
+.endif
+.endm
 
 	.text
 SYM_FUNC_START(__get_user_1)
-	LOAD_TASK_SIZE_MINUS_N(0)
-	cmp %_ASM_DX,%_ASM_AX
-	jae bad_get_user
-	sbb %_ASM_DX, %_ASM_DX		/* array_index_mask_nospec() */
-	and %_ASM_DX, %_ASM_AX
+	check_range size=1
 	ASM_STAC
 1:	movzbl (%_ASM_AX),%edx
 	xor %eax,%eax
@@ -62,11 +62,7 @@ SYM_FUNC_END(__get_user_1)
 EXPORT_SYMBOL(__get_user_1)
 
 SYM_FUNC_START(__get_user_2)
-	LOAD_TASK_SIZE_MINUS_N(1)
-	cmp %_ASM_DX,%_ASM_AX
-	jae bad_get_user
-	sbb %_ASM_DX, %_ASM_DX		/* array_index_mask_nospec() */
-	and %_ASM_DX, %_ASM_AX
+	check_range size=2
 	ASM_STAC
 2:	movzwl (%_ASM_AX),%edx
 	xor %eax,%eax
@@ -76,11 +72,7 @@ SYM_FUNC_END(__get_user_2)
 EXPORT_SYMBOL(__get_user_2)
 
 SYM_FUNC_START(__get_user_4)
-	LOAD_TASK_SIZE_MINUS_N(3)
-	cmp %_ASM_DX,%_ASM_AX
-	jae bad_get_user
-	sbb %_ASM_DX, %_ASM_DX		/* array_index_mask_nospec() */
-	and %_ASM_DX, %_ASM_AX
+	check_range size=4
 	ASM_STAC
 3:	movl (%_ASM_AX),%edx
 	xor %eax,%eax
@@ -90,30 +82,17 @@ SYM_FUNC_END(__get_user_4)
 EXPORT_SYMBOL(__get_user_4)
 
 SYM_FUNC_START(__get_user_8)
-#ifdef CONFIG_X86_64
-	LOAD_TASK_SIZE_MINUS_N(7)
-	cmp %_ASM_DX,%_ASM_AX
-	jae bad_get_user
-	sbb %_ASM_DX, %_ASM_DX		/* array_index_mask_nospec() */
-	and %_ASM_DX, %_ASM_AX
+	check_range size=8
 	ASM_STAC
+#ifdef CONFIG_X86_64
 4:	movq (%_ASM_AX),%rdx
-	xor %eax,%eax
-	ASM_CLAC
-	RET
 #else
-	LOAD_TASK_SIZE_MINUS_N(7)
-	cmp %_ASM_DX,%_ASM_AX
-	jae bad_get_user_8
-	sbb %_ASM_DX, %_ASM_DX		/* array_index_mask_nospec() */
-	and %_ASM_DX, %_ASM_AX
-	ASM_STAC
 4:	movl (%_ASM_AX),%edx
 5:	movl 4(%_ASM_AX),%ecx
+#endif
 	xor %eax,%eax
 	ASM_CLAC
 	RET
-#endif
 SYM_FUNC_END(__get_user_8)
 EXPORT_SYMBOL(__get_user_8)
 
@@ -166,7 +145,7 @@ EXPORT_SYMBOL(__get_user_nocheck_8)
 
 SYM_CODE_START_LOCAL(.Lbad_get_user_clac)
 	ASM_CLAC
-bad_get_user:
+.Lbad_get_user:
 	xor %edx,%edx
 	mov $(-EFAULT),%_ASM_AX
 	RET
@@ -184,23 +163,23 @@ SYM_CODE_END(.Lbad_get_user_8_clac)
 #endif
 
 /* get_user */
-	_ASM_EXTABLE_UA(1b, .Lbad_get_user_clac)
-	_ASM_EXTABLE_UA(2b, .Lbad_get_user_clac)
-	_ASM_EXTABLE_UA(3b, .Lbad_get_user_clac)
+	_ASM_EXTABLE(1b, .Lbad_get_user_clac)
+	_ASM_EXTABLE(2b, .Lbad_get_user_clac)
+	_ASM_EXTABLE(3b, .Lbad_get_user_clac)
 #ifdef CONFIG_X86_64
-	_ASM_EXTABLE_UA(4b, .Lbad_get_user_clac)
+	_ASM_EXTABLE(4b, .Lbad_get_user_clac)
 #else
-	_ASM_EXTABLE_UA(4b, .Lbad_get_user_8_clac)
-	_ASM_EXTABLE_UA(5b, .Lbad_get_user_8_clac)
+	_ASM_EXTABLE(4b, .Lbad_get_user_8_clac)
+	_ASM_EXTABLE(5b, .Lbad_get_user_8_clac)
 #endif
 
 /* __get_user */
-	_ASM_EXTABLE_UA(6b, .Lbad_get_user_clac)
-	_ASM_EXTABLE_UA(7b, .Lbad_get_user_clac)
-	_ASM_EXTABLE_UA(8b, .Lbad_get_user_clac)
+	_ASM_EXTABLE(6b, .Lbad_get_user_clac)
+	_ASM_EXTABLE(7b, .Lbad_get_user_clac)
+	_ASM_EXTABLE(8b, .Lbad_get_user_clac)
 #ifdef CONFIG_X86_64
-	_ASM_EXTABLE_UA(9b, .Lbad_get_user_clac)
+	_ASM_EXTABLE(9b, .Lbad_get_user_clac)
 #else
-	_ASM_EXTABLE_UA(9b, .Lbad_get_user_8_clac)
-	_ASM_EXTABLE_UA(10b, .Lbad_get_user_8_clac)
+	_ASM_EXTABLE(9b, .Lbad_get_user_8_clac)
+	_ASM_EXTABLE(10b, .Lbad_get_user_8_clac)
 #endif
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index a64017602010..8f95fb267caa 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -11,13 +11,6 @@
 .section .noinstr.text, "ax"
 
 /*
- * We build a jump to memcpy_orig by default which gets NOPped out on
- * the majority of x86 CPUs which set REP_GOOD. In addition, CPUs which
- * have the enhanced REP MOVSB/STOSB feature (ERMS), change those NOPs
- * to a jmp to memcpy_erms which does the REP; MOVSB mem copy.
- */
-
-/*
  * memcpy - Copy a memory block.
  *
  * Input:
@@ -27,17 +20,21 @@
  *
  * Output:
  * rax original destination
+ *
+ * The FSRM alternative should be done inline (avoiding the call and
+ * the disgusting return handling), but that would require some help
+ * from the compiler for better calling conventions.
+ *
+ * The 'rep movsb' itself is small enough to replace the call, but the
+ * two register moves blow up the code. And one of them is "needed"
+ * only for the return value that is the same as the source input,
+ * which the compiler could/should do much better anyway.
  */
 SYM_TYPED_FUNC_START(__memcpy)
-	ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
-		      "jmp memcpy_erms", X86_FEATURE_ERMS
+	ALTERNATIVE "jmp memcpy_orig", "", X86_FEATURE_FSRM
 
 	movq %rdi, %rax
 	movq %rdx, %rcx
-	shrq $3, %rcx
-	andl $7, %edx
-	rep movsq
-	movl %edx, %ecx
 	rep movsb
 	RET
 SYM_FUNC_END(__memcpy)
@@ -46,17 +43,6 @@ EXPORT_SYMBOL(__memcpy)
 SYM_FUNC_ALIAS(memcpy, __memcpy)
 EXPORT_SYMBOL(memcpy)
 
-/*
- * memcpy_erms() - enhanced fast string memcpy. This is faster and
- * simpler than memcpy. Use memcpy_erms when possible.
- */
-SYM_FUNC_START_LOCAL(memcpy_erms)
-	movq %rdi, %rax
-	movq %rdx, %rcx
-	rep movsb
-	RET
-SYM_FUNC_END(memcpy_erms)
-
 SYM_FUNC_START_LOCAL(memcpy_orig)
 	movq %rdi, %rax
 
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 6143b1a6fa2c..7c59a704c458 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -18,27 +18,22 @@
  * rdx   count (bytes)
  *
  * rax   original destination
+ *
+ * The FSRS alternative should be done inline (avoiding the call and
+ * the disgusting return handling), but that would require some help
+ * from the compiler for better calling conventions.
+ *
+ * The 'rep stosb' itself is small enough to replace the call, but all
+ * the register moves blow up the code. And two of them are "needed"
+ * only for the return value that is the same as the source input,
+ * which the compiler could/should do much better anyway.
  */
 SYM_FUNC_START(__memset)
-	/*
-	 * Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended
-	 * to use it when possible. If not available, use fast string instructions.
-	 *
-	 * Otherwise, use original memset function.
-	 */
-	ALTERNATIVE_2 "jmp memset_orig", "", X86_FEATURE_REP_GOOD, \
-		      "jmp memset_erms", X86_FEATURE_ERMS
+	ALTERNATIVE "jmp memset_orig", "", X86_FEATURE_FSRS
 
 	movq %rdi,%r9
+	movb %sil,%al
 	movq %rdx,%rcx
-	andl $7,%edx
-	shrq $3,%rcx
-	/* expand byte value  */
-	movzbl %sil,%esi
-	movabs $0x0101010101010101,%rax
-	imulq %rsi,%rax
-	rep stosq
-	movl %edx,%ecx
 	rep stosb
 	movq %r9,%rax
 	RET
@@ -48,26 +43,6 @@ EXPORT_SYMBOL(__memset)
 SYM_FUNC_ALIAS(memset, __memset)
 EXPORT_SYMBOL(memset)
 
-/*
- * ISO C memset - set a memory block to a byte value. This function uses
- * enhanced rep stosb to override the fast string function.
- * The code is simpler and shorter than the fast string function as well.
- *
- * rdi   destination
- * rsi   value (char)
- * rdx   count (bytes)
- *
- * rax   original destination
- */
-SYM_FUNC_START_LOCAL(memset_erms)
-	movq %rdi,%r9
-	movb %sil,%al
-	movq %rdx,%rcx
-	rep stosb
-	movq %r9,%rax
-	RET
-SYM_FUNC_END(memset_erms)
-
 SYM_FUNC_START_LOCAL(memset_orig)
 	movq %rdi,%r10
 
diff --git a/arch/x86/lib/putuser.S b/arch/x86/lib/putuser.S
index 32125224fcca..3062d09a776d 100644
--- a/arch/x86/lib/putuser.S
+++ b/arch/x86/lib/putuser.S
@@ -33,20 +33,20 @@
  * as they get called from within inline assembly.
  */
 
-#ifdef CONFIG_X86_5LEVEL
-#define LOAD_TASK_SIZE_MINUS_N(n) \
-	ALTERNATIVE __stringify(mov $((1 << 47) - 4096 - (n)),%rbx), \
-		    __stringify(mov $((1 << 56) - 4096 - (n)),%rbx), X86_FEATURE_LA57
-#else
-#define LOAD_TASK_SIZE_MINUS_N(n) \
-	mov $(TASK_SIZE_MAX - (n)),%_ASM_BX
-#endif
+.macro check_range size:req
+.if IS_ENABLED(CONFIG_X86_64)
+	mov %rcx, %rbx
+	sar $63, %rbx
+	or %rbx, %rcx
+.else
+	cmp $TASK_SIZE_MAX-\size+1, %ecx
+	jae .Lbad_put_user
+.endif
+.endm
 
 .text
 SYM_FUNC_START(__put_user_1)
-	LOAD_TASK_SIZE_MINUS_N(0)
-	cmp %_ASM_BX,%_ASM_CX
-	jae .Lbad_put_user
+	check_range size=1
 	ASM_STAC
 1:	movb %al,(%_ASM_CX)
 	xor %ecx,%ecx
@@ -66,9 +66,7 @@ SYM_FUNC_END(__put_user_nocheck_1)
 EXPORT_SYMBOL(__put_user_nocheck_1)
 
 SYM_FUNC_START(__put_user_2)
-	LOAD_TASK_SIZE_MINUS_N(1)
-	cmp %_ASM_BX,%_ASM_CX
-	jae .Lbad_put_user
+	check_range size=2
 	ASM_STAC
 3:	movw %ax,(%_ASM_CX)
 	xor %ecx,%ecx
@@ -88,9 +86,7 @@ SYM_FUNC_END(__put_user_nocheck_2)
 EXPORT_SYMBOL(__put_user_nocheck_2)
 
 SYM_FUNC_START(__put_user_4)
-	LOAD_TASK_SIZE_MINUS_N(3)
-	cmp %_ASM_BX,%_ASM_CX
-	jae .Lbad_put_user
+	check_range size=4
 	ASM_STAC
 5:	movl %eax,(%_ASM_CX)
 	xor %ecx,%ecx
@@ -110,9 +106,7 @@ SYM_FUNC_END(__put_user_nocheck_4)
 EXPORT_SYMBOL(__put_user_nocheck_4)
 
 SYM_FUNC_START(__put_user_8)
-	LOAD_TASK_SIZE_MINUS_N(7)
-	cmp %_ASM_BX,%_ASM_CX
-	jae .Lbad_put_user
+	check_range size=8
 	ASM_STAC
 7:	mov %_ASM_AX,(%_ASM_CX)
 #ifdef CONFIG_X86_32
@@ -144,15 +138,15 @@ SYM_CODE_START_LOCAL(.Lbad_put_user_clac)
 	RET
 SYM_CODE_END(.Lbad_put_user_clac)
 
-	_ASM_EXTABLE_UA(1b, .Lbad_put_user_clac)
-	_ASM_EXTABLE_UA(2b, .Lbad_put_user_clac)
-	_ASM_EXTABLE_UA(3b, .Lbad_put_user_clac)
-	_ASM_EXTABLE_UA(4b, .Lbad_put_user_clac)
-	_ASM_EXTABLE_UA(5b, .Lbad_put_user_clac)
-	_ASM_EXTABLE_UA(6b, .Lbad_put_user_clac)
-	_ASM_EXTABLE_UA(7b, .Lbad_put_user_clac)
-	_ASM_EXTABLE_UA(9b, .Lbad_put_user_clac)
+	_ASM_EXTABLE(1b, .Lbad_put_user_clac)
+	_ASM_EXTABLE(2b, .Lbad_put_user_clac)
+	_ASM_EXTABLE(3b, .Lbad_put_user_clac)
+	_ASM_EXTABLE(4b, .Lbad_put_user_clac)
+	_ASM_EXTABLE(5b, .Lbad_put_user_clac)
+	_ASM_EXTABLE(6b, .Lbad_put_user_clac)
+	_ASM_EXTABLE(7b, .Lbad_put_user_clac)
+	_ASM_EXTABLE(9b, .Lbad_put_user_clac)
 #ifdef CONFIG_X86_32
-	_ASM_EXTABLE_UA(8b, .Lbad_put_user_clac)
-	_ASM_EXTABLE_UA(10b, .Lbad_put_user_clac)
+	_ASM_EXTABLE(8b, .Lbad_put_user_clac)
+	_ASM_EXTABLE(10b, .Lbad_put_user_clac)
 #endif
diff --git a/arch/x86/lib/retpoline.S b/arch/x86/lib/retpoline.S
index 5f61c65322be..27ef53fab6bd 100644
--- a/arch/x86/lib/retpoline.S
+++ b/arch/x86/lib/retpoline.S
@@ -33,7 +33,7 @@
 
 	.align RETPOLINE_THUNK_SIZE
 SYM_INNER_LABEL(__x86_indirect_thunk_\reg, SYM_L_GLOBAL)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_UNDEFINED
 	ANNOTATE_NOENDBR
 
 	ALTERNATIVE_2 __stringify(RETPOLINE \reg), \
@@ -75,7 +75,7 @@ SYM_CODE_END(__x86_indirect_thunk_array)
 	.align RETPOLINE_THUNK_SIZE
 
 SYM_INNER_LABEL(__x86_indirect_call_thunk_\reg, SYM_L_GLOBAL)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_UNDEFINED
 	ANNOTATE_NOENDBR
 
 	CALL_DEPTH_ACCOUNT
@@ -103,7 +103,7 @@ SYM_CODE_END(__x86_indirect_call_thunk_array)
 	.align RETPOLINE_THUNK_SIZE
 
 SYM_INNER_LABEL(__x86_indirect_jump_thunk_\reg, SYM_L_GLOBAL)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_UNDEFINED
 	ANNOTATE_NOENDBR
 	POLINE \reg
 	ANNOTATE_UNRET_SAFE
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index 6c1f8ac5e721..003d90138e20 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -45,7 +45,11 @@ EXPORT_SYMBOL_GPL(arch_wb_cache_pmem);
 long __copy_user_flushcache(void *dst, const void __user *src, unsigned size)
 {
 	unsigned long flushed, dest = (unsigned long) dst;
-	long rc = __copy_user_nocache(dst, src, size, 0);
+	long rc;
+
+	stac();
+	rc = __copy_user_nocache(dst, src, size);
+	clac();
 
 	/*
 	 * __copy_user_nocache() uses non-temporal stores for the bulk
@@ -136,13 +140,4 @@ void __memcpy_flushcache(void *_dst, const void *_src, size_t size)
 	}
 }
 EXPORT_SYMBOL_GPL(__memcpy_flushcache);
-
-void memcpy_page_flushcache(char *to, struct page *page, size_t offset,
-		size_t len)
-{
-	char *from = kmap_atomic(page);
-
-	memcpy_flushcache(to, from + offset, len);
-	kunmap_atomic(from);
-}
 #endif
diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c
index 7316a8224259..e91500a80963 100644
--- a/arch/x86/mm/cpu_entry_area.c
+++ b/arch/x86/mm/cpu_entry_area.c
@@ -10,6 +10,7 @@
 #include <asm/fixmap.h>
 #include <asm/desc.h>
 #include <asm/kasan.h>
+#include <asm/setup.h>
 
 static DEFINE_PER_CPU_PAGE_ALIGNED(struct entry_stack_page, entry_stack_storage);
 
@@ -29,6 +30,12 @@ static __init void init_cea_offsets(void)
 	unsigned int max_cea;
 	unsigned int i, j;
 
+	if (!kaslr_enabled()) {
+		for_each_possible_cpu(i)
+			per_cpu(_cea_offset, i) = i;
+		return;
+	}
+
 	max_cea = (CPU_ENTRY_AREA_MAP_SIZE - PAGE_SIZE) / CPU_ENTRY_AREA_SIZE;
 
 	/* O(sodding terrible) */
diff --git a/arch/x86/mm/debug_pagetables.c b/arch/x86/mm/debug_pagetables.c
index 092ea436c7e6..b43301cb2a80 100644
--- a/arch/x86/mm/debug_pagetables.c
+++ b/arch/x86/mm/debug_pagetables.c
@@ -71,6 +71,5 @@ static void __exit pt_dump_debug_exit(void)
 
 module_init(pt_dump_debug_init);
 module_exit(pt_dump_debug_exit);
-MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Arjan van de Ven <arjan@linux.intel.com>");
 MODULE_DESCRIPTION("Kernel debugging helper that dumps pagetables");
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index a498ae1fbe66..e4399983c50c 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -19,6 +19,7 @@
 #include <linux/uaccess.h>		/* faulthandler_disabled()	*/
 #include <linux/efi.h>			/* efi_crash_gracefully_on_page_fault()*/
 #include <linux/mm_types.h>
+#include <linux/mm.h>			/* find_and_lock_vma() */
 
 #include <asm/cpufeature.h>		/* boot_cpu_has, ...		*/
 #include <asm/traps.h>			/* dotraplinkage, ...		*/
@@ -1333,6 +1334,38 @@ void do_user_addr_fault(struct pt_regs *regs,
 	}
 #endif
 
+#ifdef CONFIG_PER_VMA_LOCK
+	if (!(flags & FAULT_FLAG_USER))
+		goto lock_mmap;
+
+	vma = lock_vma_under_rcu(mm, address);
+	if (!vma)
+		goto lock_mmap;
+
+	if (unlikely(access_error(error_code, vma))) {
+		vma_end_read(vma);
+		goto lock_mmap;
+	}
+	fault = handle_mm_fault(vma, address, flags | FAULT_FLAG_VMA_LOCK, regs);
+	vma_end_read(vma);
+
+	if (!(fault & VM_FAULT_RETRY)) {
+		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+		goto done;
+	}
+	count_vm_vma_lock_event(VMA_LOCK_RETRY);
+
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			kernelmode_fixup_or_oops(regs, error_code, address,
+						 SIGBUS, BUS_ADRERR,
+						 ARCH_DEFAULT_PKEY);
+		return;
+	}
+lock_mmap:
+#endif /* CONFIG_PER_VMA_LOCK */
+
 	/*
 	 * Kernel-mode access to the user address space should only occur
 	 * on well-defined single instructions listed in the exception
@@ -1433,6 +1466,9 @@ good_area:
 	}
 
 	mmap_read_unlock(mm);
+#ifdef CONFIG_PER_VMA_LOCK
+done:
+#endif
 	if (likely(!(fault & VM_FAULT_ERROR)))
 		return;
 
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index cb258f58fdc8..3cdac0f0055d 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -806,7 +806,7 @@ void __init poking_init(void)
 	BUG_ON(!poking_mm);
 
 	/* Xen PV guests need the PGD to be pinned. */
-	paravirt_arch_dup_mmap(NULL, poking_mm);
+	paravirt_enter_mmap(poking_mm);
 
 	/*
 	 * Randomize the poking address, but make sure that the following page
@@ -1048,6 +1048,11 @@ __visible DEFINE_PER_CPU_ALIGNED(struct tlb_state, cpu_tlbstate) = {
 	.cr4 = ~0UL,	/* fail hard if we screw up cr4 shadow initialization */
 };
 
+#ifdef CONFIG_ADDRESS_MASKING
+DEFINE_PER_CPU(u64, tlbstate_untag_mask);
+EXPORT_PER_CPU_SYMBOL(tlbstate_untag_mask);
+#endif
+
 void update_cache_mode_entry(unsigned entry, enum page_cache_mode cache)
 {
 	/* entry 0 MUST be WB (hardwired to speed up translations) */
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 6453fbaedb08..aa7d279321ea 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -116,6 +116,11 @@ static void __ioremap_check_other(resource_size_t addr, struct ioremap_desc *des
 	if (!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
 		return;
 
+	if (x86_platform.hyper.is_private_mmio(addr)) {
+		desc->flags |= IORES_MAP_ENCRYPTED;
+		return;
+	}
+
 	if (!IS_ENABLED(CONFIG_EFI))
 		return;
 
diff --git a/arch/x86/mm/mem_encrypt_amd.c b/arch/x86/mm/mem_encrypt_amd.c
index 9c4d8dbcb129..e0b51c09109f 100644
--- a/arch/x86/mm/mem_encrypt_amd.c
+++ b/arch/x86/mm/mem_encrypt_amd.c
@@ -513,10 +513,14 @@ void __init mem_encrypt_free_decrypted_mem(void)
 	npages = (vaddr_end - vaddr) >> PAGE_SHIFT;
 
 	/*
-	 * The unused memory range was mapped decrypted, change the encryption
-	 * attribute from decrypted to encrypted before freeing it.
+	 * If the unused memory range was mapped decrypted, change the encryption
+	 * attribute from decrypted to encrypted before freeing it. Base the
+	 * re-encryption on the same condition used for the decryption in
+	 * sme_postprocess_startup(). Higher level abstractions, such as
+	 * CC_ATTR_MEM_ENCRYPT, aren't necessarily equivalent in a Hyper-V VM
+	 * using vTOM, where sme_me_mask is always zero.
 	 */
-	if (cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
+	if (sme_me_mask) {
 		r = set_memory_encrypted(vaddr, npages);
 		if (r) {
 			pr_warn("failed to free unused decrypted pages\n");
diff --git a/arch/x86/mm/pat/memtype.c b/arch/x86/mm/pat/memtype.c
index 46a00aa858b6..de10800cd4dd 100644
--- a/arch/x86/mm/pat/memtype.c
+++ b/arch/x86/mm/pat/memtype.c
@@ -1073,11 +1073,15 @@ void untrack_pfn(struct vm_area_struct *vma, unsigned long pfn,
 }
 
 /*
- * untrack_pfn_moved is called, while mremapping a pfnmap for a new region,
- * with the old vma after its pfnmap page table has been removed.  The new
- * vma has a new pfnmap to the same pfn & cache type with VM_PAT set.
+ * untrack_pfn_clear is called if the following situation fits:
+ *
+ * 1) while mremapping a pfnmap for a new region,  with the old vma after
+ * its pfnmap page table has been removed.  The new vma has a new pfnmap
+ * to the same pfn & cache type with VM_PAT set.
+ * 2) while duplicating vm area, the new vma fails to copy the pgtable from
+ * old vma.
  */
-void untrack_pfn_moved(struct vm_area_struct *vma)
+void untrack_pfn_clear(struct vm_area_struct *vma)
 {
 	vm_flags_clear(vma, VM_PAT);
 }
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index 356758b7d4b4..7159cf787613 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -234,7 +234,7 @@ within_inclusive(unsigned long addr, unsigned long start, unsigned long end)
  * take full advantage of the the limited (s32) immediate addressing range (2G)
  * of x86_64.
  *
- * See Documentation/x86/x86_64/mm.rst for more detail.
+ * See Documentation/arch/x86/x86_64/mm.rst for more detail.
  */
 
 static inline unsigned long highmap_start_pfn(void)
@@ -2175,9 +2175,6 @@ static int __set_memory_enc_pgtable(unsigned long addr, int numpages, bool enc)
 
 static int __set_memory_enc_dec(unsigned long addr, int numpages, bool enc)
 {
-	if (hv_is_isolation_supported())
-		return hv_set_mem_host_visibility(addr, numpages, !enc);
-
 	if (cc_platform_has(CC_ATTR_MEM_ENCRYPT))
 		return __set_memory_enc_pgtable(addr, numpages, enc);
 
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 92d73ccede70..267acf27480a 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -154,26 +154,30 @@ static inline u16 user_pcid(u16 asid)
 	return ret;
 }
 
-static inline unsigned long build_cr3(pgd_t *pgd, u16 asid)
+static inline unsigned long build_cr3(pgd_t *pgd, u16 asid, unsigned long lam)
 {
+	unsigned long cr3 = __sme_pa(pgd) | lam;
+
 	if (static_cpu_has(X86_FEATURE_PCID)) {
-		return __sme_pa(pgd) | kern_pcid(asid);
+		VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
+		cr3 |= kern_pcid(asid);
 	} else {
 		VM_WARN_ON_ONCE(asid != 0);
-		return __sme_pa(pgd);
 	}
+
+	return cr3;
 }
 
-static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
+static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid,
+					      unsigned long lam)
 {
-	VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
 	/*
 	 * Use boot_cpu_has() instead of this_cpu_has() as this function
 	 * might be called during early boot. This should work even after
 	 * boot because all CPU's the have same capabilities:
 	 */
 	VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID));
-	return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH;
+	return build_cr3(pgd, asid, lam) | CR3_NOFLUSH;
 }
 
 /*
@@ -274,15 +278,16 @@ static inline void invalidate_user_asid(u16 asid)
 		  (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask));
 }
 
-static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush)
+static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, unsigned long lam,
+			    bool need_flush)
 {
 	unsigned long new_mm_cr3;
 
 	if (need_flush) {
 		invalidate_user_asid(new_asid);
-		new_mm_cr3 = build_cr3(pgdir, new_asid);
+		new_mm_cr3 = build_cr3(pgdir, new_asid, lam);
 	} else {
-		new_mm_cr3 = build_cr3_noflush(pgdir, new_asid);
+		new_mm_cr3 = build_cr3_noflush(pgdir, new_asid, lam);
 	}
 
 	/*
@@ -491,6 +496,7 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 {
 	struct mm_struct *real_prev = this_cpu_read(cpu_tlbstate.loaded_mm);
 	u16 prev_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
+	unsigned long new_lam = mm_lam_cr3_mask(next);
 	bool was_lazy = this_cpu_read(cpu_tlbstate_shared.is_lazy);
 	unsigned cpu = smp_processor_id();
 	u64 next_tlb_gen;
@@ -520,7 +526,8 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 	 * isn't free.
 	 */
 #ifdef CONFIG_DEBUG_VM
-	if (WARN_ON_ONCE(__read_cr3() != build_cr3(real_prev->pgd, prev_asid))) {
+	if (WARN_ON_ONCE(__read_cr3() != build_cr3(real_prev->pgd, prev_asid,
+						   tlbstate_lam_cr3_mask()))) {
 		/*
 		 * If we were to BUG here, we'd be very likely to kill
 		 * the system so hard that we don't see the call trace.
@@ -552,10 +559,16 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 	 * instruction.
 	 */
 	if (real_prev == next) {
+		/* Not actually switching mm's */
 		VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) !=
 			   next->context.ctx_id);
 
 		/*
+		 * If this races with another thread that enables lam, 'new_lam'
+		 * might not match tlbstate_lam_cr3_mask().
+		 */
+
+		/*
 		 * Even in lazy TLB mode, the CPU should stay set in the
 		 * mm_cpumask. The TLB shootdown code can figure out from
 		 * cpu_tlbstate_shared.is_lazy whether or not to send an IPI.
@@ -622,15 +635,16 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 		barrier();
 	}
 
+	set_tlbstate_lam_mode(next);
 	if (need_flush) {
 		this_cpu_write(cpu_tlbstate.ctxs[new_asid].ctx_id, next->context.ctx_id);
 		this_cpu_write(cpu_tlbstate.ctxs[new_asid].tlb_gen, next_tlb_gen);
-		load_new_mm_cr3(next->pgd, new_asid, true);
+		load_new_mm_cr3(next->pgd, new_asid, new_lam, true);
 
 		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
 	} else {
 		/* The new ASID is already up to date. */
-		load_new_mm_cr3(next->pgd, new_asid, false);
+		load_new_mm_cr3(next->pgd, new_asid, new_lam, false);
 
 		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, 0);
 	}
@@ -691,6 +705,10 @@ void initialize_tlbstate_and_flush(void)
 	/* Assert that CR3 already references the right mm. */
 	WARN_ON((cr3 & CR3_ADDR_MASK) != __pa(mm->pgd));
 
+	/* LAM expected to be disabled */
+	WARN_ON(cr3 & (X86_CR3_LAM_U48 | X86_CR3_LAM_U57));
+	WARN_ON(mm_lam_cr3_mask(mm));
+
 	/*
 	 * Assert that CR4.PCIDE is set if needed.  (CR4.PCIDE initialization
 	 * doesn't work like other CR4 bits because it can only be set from
@@ -699,8 +717,8 @@ void initialize_tlbstate_and_flush(void)
 	WARN_ON(boot_cpu_has(X86_FEATURE_PCID) &&
 		!(cr4_read_shadow() & X86_CR4_PCIDE));
 
-	/* Force ASID 0 and force a TLB flush. */
-	write_cr3(build_cr3(mm->pgd, 0));
+	/* Disable LAM, force ASID 0 and force a TLB flush. */
+	write_cr3(build_cr3(mm->pgd, 0, 0));
 
 	/* Reinitialize tlbstate. */
 	this_cpu_write(cpu_tlbstate.last_user_mm_spec, LAST_USER_MM_INIT);
@@ -708,6 +726,7 @@ void initialize_tlbstate_and_flush(void)
 	this_cpu_write(cpu_tlbstate.next_asid, 1);
 	this_cpu_write(cpu_tlbstate.ctxs[0].ctx_id, mm->context.ctx_id);
 	this_cpu_write(cpu_tlbstate.ctxs[0].tlb_gen, tlb_gen);
+	set_tlbstate_lam_mode(mm);
 
 	for (i = 1; i < TLB_NR_DYN_ASIDS; i++)
 		this_cpu_write(cpu_tlbstate.ctxs[i].ctx_id, 0);
@@ -925,7 +944,7 @@ void flush_tlb_multi(const struct cpumask *cpumask,
 }
 
 /*
- * See Documentation/x86/tlb.rst for details.  We choose 33
+ * See Documentation/arch/x86/tlb.rst for details.  We choose 33
  * because it is large enough to cover the vast majority (at
  * least 95%) of allocations, and is small enough that we are
  * confident it will not cause too much overhead.  Each single
@@ -1071,8 +1090,10 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
  */
 unsigned long __get_current_cr3_fast(void)
 {
-	unsigned long cr3 = build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd,
-		this_cpu_read(cpu_tlbstate.loaded_mm_asid));
+	unsigned long cr3 =
+		build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd,
+			  this_cpu_read(cpu_tlbstate.loaded_mm_asid),
+			  tlbstate_lam_cr3_mask());
 
 	/* For now, be very restrictive about when this can be called. */
 	VM_WARN_ON(in_nmi() || preemptible());
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 615a76d70019..e3ec02e6ac9f 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -7,6 +7,7 @@
 #include <linux/dmi.h>
 #include <linux/pci.h>
 #include <linux/vgaarb.h>
+#include <asm/amd_nb.h>
 #include <asm/hpet.h>
 #include <asm/pci_x86.h>
 
@@ -824,3 +825,82 @@ static void rs690_fix_64bit_dma(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7910, rs690_fix_64bit_dma);
 
 #endif
+
+#ifdef CONFIG_AMD_NB
+
+#define AMD_15B8_RCC_DEV2_EPF0_STRAP2                                  0x10136008
+#define AMD_15B8_RCC_DEV2_EPF0_STRAP2_NO_SOFT_RESET_DEV2_F0_MASK       0x00000080L
+
+static void quirk_clear_strap_no_soft_reset_dev2_f0(struct pci_dev *dev)
+{
+	u32 data;
+
+	if (!amd_smn_read(0, AMD_15B8_RCC_DEV2_EPF0_STRAP2, &data)) {
+		data &= ~AMD_15B8_RCC_DEV2_EPF0_STRAP2_NO_SOFT_RESET_DEV2_F0_MASK;
+		if (amd_smn_write(0, AMD_15B8_RCC_DEV2_EPF0_STRAP2, data))
+			pci_err(dev, "Failed to write data 0x%x\n", data);
+	} else {
+		pci_err(dev, "Failed to read data\n");
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15b8, quirk_clear_strap_no_soft_reset_dev2_f0);
+#endif
+
+/*
+ * When returning from D3cold to D0, firmware on some Google Coral and Reef
+ * family Chromebooks with Intel Apollo Lake SoC clobbers the headers of
+ * both the L1 PM Substates capability and the previous capability for the
+ * "Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port B #1".
+ *
+ * Save those values at enumeration-time and restore them at resume.
+ */
+
+static u16 prev_cap, l1ss_cap;
+static u32 prev_header, l1ss_header;
+
+static void chromeos_save_apl_pci_l1ss_capability(struct pci_dev *dev)
+{
+	int pos = PCI_CFG_SPACE_SIZE, prev = 0;
+	u32 header, pheader = 0;
+
+	while (pos) {
+		pci_read_config_dword(dev, pos, &header);
+		if (PCI_EXT_CAP_ID(header) == PCI_EXT_CAP_ID_L1SS) {
+			prev_cap = prev;
+			prev_header = pheader;
+			l1ss_cap = pos;
+			l1ss_header = header;
+			return;
+		}
+
+		prev = pos;
+		pheader = header;
+		pos = PCI_EXT_CAP_NEXT(header);
+	}
+}
+
+static void chromeos_fixup_apl_pci_l1ss_capability(struct pci_dev *dev)
+{
+	u32 header;
+
+	if (!prev_cap || !prev_header || !l1ss_cap || !l1ss_header)
+		return;
+
+	/* Fixup the header of L1SS Capability if missing */
+	pci_read_config_dword(dev, l1ss_cap, &header);
+	if (header != l1ss_header) {
+		pci_write_config_dword(dev, l1ss_cap, l1ss_header);
+		pci_info(dev, "restore L1SS Capability header (was %#010x now %#010x)\n",
+			 header, l1ss_header);
+	}
+
+	/* Fixup the link to L1SS Capability if missing */
+	pci_read_config_dword(dev, prev_cap, &header);
+	if (header != prev_header) {
+		pci_write_config_dword(dev, prev_cap, prev_header);
+		pci_info(dev, "restore previous Capability header (was %#010x now %#010x)\n",
+			 header, prev_header);
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x5ad6, chromeos_save_apl_pci_l1ss_capability);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x5ad6, chromeos_fixup_apl_pci_l1ss_capability);
diff --git a/arch/x86/platform/pvh/enlighten.c b/arch/x86/platform/pvh/enlighten.c
index ed0442e35434..00a92cb2c814 100644
--- a/arch/x86/platform/pvh/enlighten.c
+++ b/arch/x86/platform/pvh/enlighten.c
@@ -86,7 +86,7 @@ static void __init init_pvh_bootparams(bool xen_guest)
 	}
 
 	/*
-	 * See Documentation/x86/boot.rst.
+	 * See Documentation/arch/x86/boot.rst.
 	 *
 	 * Version 2.12 supports Xen entry point but we will use default x86/PC
 	 * environment (i.e. hardware_subarch 0).
diff --git a/arch/x86/platform/pvh/head.S b/arch/x86/platform/pvh/head.S
index 7fe564eaf228..c4365a05ab83 100644
--- a/arch/x86/platform/pvh/head.S
+++ b/arch/x86/platform/pvh/head.S
@@ -50,7 +50,7 @@
 #define PVH_DS_SEL		(PVH_GDT_ENTRY_DS * 8)
 
 SYM_CODE_START_LOCAL(pvh_start_xen)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	cld
 
 	lgdt (_pa(gdt))
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 236447ee9beb..7a4d5e911415 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -288,7 +288,7 @@ EXPORT_SYMBOL(restore_processor_state);
 #endif
 
 #if defined(CONFIG_HIBERNATION) && defined(CONFIG_HOTPLUG_CPU)
-static void resume_play_dead(void)
+static void __noreturn resume_play_dead(void)
 {
 	play_dead_common();
 	tboot_shutdown(TB_SHUTDOWN_WFS);
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index 17f09dc26381..82fec66d46d2 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -69,8 +69,7 @@ CFLAGS_sha256.o			+= $(PURGATORY_CFLAGS)
 CFLAGS_REMOVE_string.o		+= $(PURGATORY_CFLAGS_REMOVE)
 CFLAGS_string.o			+= $(PURGATORY_CFLAGS)
 
-AFLAGS_REMOVE_setup-x86_$(BITS).o	+= -Wa,-gdwarf-2
-AFLAGS_REMOVE_entry64.o			+= -Wa,-gdwarf-2
+asflags-remove-y		+= $(foreach x, -g -gdwarf-4 -gdwarf-5, $(x) -Wa,$(x))
 
 $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
 		$(call if_changed,ld)
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index 2925074b9a58..d30949e25ebd 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -406,7 +406,7 @@ static void read_ehdr(FILE *fp)
 	if (ehdr.e_version != EV_CURRENT)
 		die("Unknown ELF version\n");
 	if (ehdr.e_ehsize != sizeof(Elf_Ehdr))
-		die("Bad Elf header size\n");
+		die("Bad ELF header size\n");
 	if (ehdr.e_phentsize != sizeof(Elf_Phdr))
 		die("Bad program header entry\n");
 	if (ehdr.e_shentsize != sizeof(Elf_Shdr))
diff --git a/arch/x86/xen/enlighten_pvh.c b/arch/x86/xen/enlighten_pvh.c
index 1da44aca896c..ada3868c02c2 100644
--- a/arch/x86/xen/enlighten_pvh.c
+++ b/arch/x86/xen/enlighten_pvh.c
@@ -48,7 +48,7 @@ void __init xen_pvh_init(struct boot_params *boot_params)
 		struct xen_platform_op op = {
 			.cmd = XENPF_get_dom0_console,
 		};
-		long ret = HYPERVISOR_platform_op(&op);
+		int ret = HYPERVISOR_platform_op(&op);
 
 		if (ret > 0)
 			xen_init_vga(&op.u.dom0_console,
diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c
index ee29fb558f2e..b3b8d289b9ab 100644
--- a/arch/x86/xen/mmu_pv.c
+++ b/arch/x86/xen/mmu_pv.c
@@ -885,14 +885,7 @@ void xen_mm_unpin_all(void)
 	spin_unlock(&pgd_lock);
 }
 
-static void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next)
-{
-	spin_lock(&next->page_table_lock);
-	xen_pgd_pin(next);
-	spin_unlock(&next->page_table_lock);
-}
-
-static void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm)
+static void xen_enter_mmap(struct mm_struct *mm)
 {
 	spin_lock(&mm->page_table_lock);
 	xen_pgd_pin(mm);
@@ -2153,8 +2146,7 @@ static const typeof(pv_ops) xen_mmu_ops __initconst = {
 		.make_p4d = PV_CALLEE_SAVE(xen_make_p4d),
 #endif
 
-		.activate_mm = xen_activate_mm,
-		.dup_mmap = xen_dup_mmap,
+		.enter_mmap = xen_enter_mmap,
 		.exit_mmap = xen_exit_mmap,
 
 		.lazy_mode = {
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 4a184f6e4e4d..08f1ceb9eb81 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -165,7 +165,7 @@ xen_pv_trap asm_exc_xen_hypervisor_callback
 SYM_CODE_START(xen_early_idt_handler_array)
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_UNDEFINED
 	ENDBR
 	pop %rcx
 	pop %r11
@@ -193,7 +193,7 @@ hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
  * rsp->rax		}
  */
 SYM_CODE_START(xen_iret)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_UNDEFINED
 	ANNOTATE_NOENDBR
 	pushq $0
 	jmp hypercall_iret
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index e36ea4268bd2..643d02900fbb 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -45,11 +45,11 @@ SYM_CODE_END(hypercall_page)
 #ifdef CONFIG_XEN_PV
 	__INIT
 SYM_CODE_START(startup_xen)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	ANNOTATE_NOENDBR
 	cld
 
-	mov initial_stack(%rip), %rsp
+	leaq	(__end_init_task - PTREGS_SIZE)(%rip), %rsp
 
 	/* Set up %gs.
 	 *
@@ -71,7 +71,7 @@ SYM_CODE_END(startup_xen)
 #ifdef CONFIG_XEN_PV_SMP
 .pushsection .text
 SYM_CODE_START(asm_cpu_bringup_and_idle)
-	UNWIND_HINT_EMPTY
+	UNWIND_HINT_END_OF_STACK
 	ENDBR
 
 	call cpu_bringup_and_idle
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index bcb0c5d2abc2..3c6e5471f025 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -772,18 +772,17 @@ config HIGHMEM
 	  If unsure, say Y.
 
 config ARCH_FORCE_MAX_ORDER
-	int "Maximum zone order"
-	default "11"
-	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
-
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	int "Order of maximal physically contiguous allocations"
+	default "10"
+	help
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
+
+	  Don't change if unsure.
 
 endmenu
 
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 9793b49fc641..574795a20d6f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -43,7 +43,7 @@
 #if XCHAL_HAVE_S32C1I && (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
 /*
  * We Have Atomic Operation Control (ATOMCTL) Register; Initialize it.
- * For details see Documentation/xtensa/atomctl.rst
+ * For details see Documentation/arch/xtensa/atomctl.rst
  */
 #if XCHAL_DCACHE_IS_COHERENT
 	movi	a3, 0x25	/* For SMP/MX -- internal for writeback,
diff --git a/arch/xtensa/include/asm/smp.h b/arch/xtensa/include/asm/smp.h
index 4e43f5643891..5dc5bf8cdd77 100644
--- a/arch/xtensa/include/asm/smp.h
+++ b/arch/xtensa/include/asm/smp.h
@@ -33,7 +33,7 @@ void show_ipi_list(struct seq_file *p, int prec);
 
 void __cpu_die(unsigned int cpu);
 int __cpu_disable(void);
-void cpu_die(void);
+void __noreturn cpu_die(void);
 void cpu_restart(void);
 
 #endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index d95907b8e4d3..07dd6baf18cf 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -322,7 +322,7 @@ void __cpu_die(unsigned int cpu)
 	pr_err("CPU%u: unable to kill\n", cpu);
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	cpu_die();
 }
@@ -341,6 +341,8 @@ void __ref cpu_die(void)
 	__asm__ __volatile__(
 			"	movi	a2, cpu_restart\n"
 			"	jx	a2\n");
+
+	BUG();
 }
 
 #endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index cd98366a9b23..f0a7d1c2641e 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -539,7 +539,7 @@ static size_t kstack_depth_to_print = CONFIG_PRINT_STACK_DEPTH;
 
 void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
 {
-	size_t len;
+	size_t len, off = 0;
 
 	if (!sp)
 		sp = stack_pointer(task);
@@ -548,9 +548,17 @@ void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
 		  kstack_depth_to_print * STACK_DUMP_ENTRY_SIZE);
 
 	printk("%sStack:\n", loglvl);
-	print_hex_dump(loglvl, " ", DUMP_PREFIX_NONE,
-		       STACK_DUMP_LINE_SIZE, STACK_DUMP_ENTRY_SIZE,
-		       sp, len, false);
+	while (off < len) {
+		u8 line[STACK_DUMP_LINE_SIZE];
+		size_t line_len = len - off > STACK_DUMP_LINE_SIZE ?
+			STACK_DUMP_LINE_SIZE : len - off;
+
+		__memcpy(line, (u8 *)sp + off, line_len);
+		print_hex_dump(loglvl, " ", DUMP_PREFIX_NONE,
+			       STACK_DUMP_LINE_SIZE, STACK_DUMP_ENTRY_SIZE,
+			       line, line_len, false);
+		off += STACK_DUMP_LINE_SIZE;
+	}
 	show_trace(task, sp, loglvl);
 }