summaryrefslogtreecommitdiff
path: root/block
diff options
context:
space:
mode:
Diffstat (limited to 'block')
-rw-r--r--block/bfq-iosched.c204
-rw-r--r--block/bfq-iosched.h6
-rw-r--r--block/bfq-wf2q.c2
3 files changed, 118 insertions, 94 deletions
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index f30d1cb887d4..2eb587fe7c1a 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -629,12 +629,19 @@ void bfq_pos_tree_add_move(struct bfq_data *bfqd, struct bfq_queue *bfqq)
}
/*
- * The following function returns true if every queue must receive the
- * same share of the throughput (this condition is used when deciding
- * whether idling may be disabled, see the comments in the function
- * bfq_better_to_idle()).
+ * The following function returns false either if every active queue
+ * must receive the same share of the throughput (symmetric scenario),
+ * or, as a special case, if bfqq must receive a share of the
+ * throughput lower than or equal to the share that every other active
+ * queue must receive. If bfqq does sync I/O, then these are the only
+ * two cases where bfqq happens to be guaranteed its share of the
+ * throughput even if I/O dispatching is not plugged when bfqq remains
+ * temporarily empty (for more details, see the comments in the
+ * function bfq_better_to_idle()). For this reason, the return value
+ * of this function is used to check whether I/O-dispatch plugging can
+ * be avoided.
*
- * Such a scenario occurs when:
+ * The above first case (symmetric scenario) occurs when:
* 1) all active queues have the same weight,
* 2) all active queues belong to the same I/O-priority class,
* 3) all active groups at the same level in the groups tree have the same
@@ -654,30 +661,36 @@ void bfq_pos_tree_add_move(struct bfq_data *bfqd, struct bfq_queue *bfqq)
* support or the cgroups interface are not enabled, thus no state
* needs to be maintained in this case.
*/
-static bool bfq_symmetric_scenario(struct bfq_data *bfqd)
+static bool bfq_asymmetric_scenario(struct bfq_data *bfqd,
+ struct bfq_queue *bfqq)
{
+ bool smallest_weight = bfqq &&
+ bfqq->weight_counter &&
+ bfqq->weight_counter ==
+ container_of(
+ rb_first_cached(&bfqd->queue_weights_tree),
+ struct bfq_weight_counter,
+ weights_node);
+
/*
* For queue weights to differ, queue_weights_tree must contain
* at least two nodes.
*/
- bool varied_queue_weights = !RB_EMPTY_ROOT(&bfqd->queue_weights_tree) &&
- (bfqd->queue_weights_tree.rb_node->rb_left ||
- bfqd->queue_weights_tree.rb_node->rb_right);
+ bool varied_queue_weights = !smallest_weight &&
+ !RB_EMPTY_ROOT(&bfqd->queue_weights_tree.rb_root) &&
+ (bfqd->queue_weights_tree.rb_root.rb_node->rb_left ||
+ bfqd->queue_weights_tree.rb_root.rb_node->rb_right);
bool multiple_classes_busy =
(bfqd->busy_queues[0] && bfqd->busy_queues[1]) ||
(bfqd->busy_queues[0] && bfqd->busy_queues[2]) ||
(bfqd->busy_queues[1] && bfqd->busy_queues[2]);
- /*
- * For queue weights to differ, queue_weights_tree must contain
- * at least two nodes.
- */
- return !(varied_queue_weights || multiple_classes_busy
+ return varied_queue_weights || multiple_classes_busy
#ifdef CONFIG_BFQ_GROUP_IOSCHED
|| bfqd->num_groups_with_pending_reqs > 0
#endif
- );
+ ;
}
/*
@@ -694,10 +707,11 @@ static bool bfq_symmetric_scenario(struct bfq_data *bfqd)
* should be low too.
*/
void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
- struct rb_root *root)
+ struct rb_root_cached *root)
{
struct bfq_entity *entity = &bfqq->entity;
- struct rb_node **new = &(root->rb_node), *parent = NULL;
+ struct rb_node **new = &(root->rb_root.rb_node), *parent = NULL;
+ bool leftmost = true;
/*
* Do not insert if the queue is already associated with a
@@ -726,8 +740,10 @@ void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
}
if (entity->weight < __counter->weight)
new = &((*new)->rb_left);
- else
+ else {
new = &((*new)->rb_right);
+ leftmost = false;
+ }
}
bfqq->weight_counter = kzalloc(sizeof(struct bfq_weight_counter),
@@ -736,7 +752,7 @@ void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
/*
* In the unlucky event of an allocation failure, we just
* exit. This will cause the weight of queue to not be
- * considered in bfq_symmetric_scenario, which, in its turn,
+ * considered in bfq_asymmetric_scenario, which, in its turn,
* causes the scenario to be deemed wrongly symmetric in case
* bfqq's weight would have been the only weight making the
* scenario asymmetric. On the bright side, no unbalance will
@@ -750,7 +766,8 @@ void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
bfqq->weight_counter->weight = entity->weight;
rb_link_node(&bfqq->weight_counter->weights_node, parent, new);
- rb_insert_color(&bfqq->weight_counter->weights_node, root);
+ rb_insert_color_cached(&bfqq->weight_counter->weights_node, root,
+ leftmost);
inc_counter:
bfqq->weight_counter->num_active++;
@@ -765,7 +782,7 @@ inc_counter:
*/
void __bfq_weights_tree_remove(struct bfq_data *bfqd,
struct bfq_queue *bfqq,
- struct rb_root *root)
+ struct rb_root_cached *root)
{
if (!bfqq->weight_counter)
return;
@@ -774,7 +791,7 @@ void __bfq_weights_tree_remove(struct bfq_data *bfqd,
if (bfqq->weight_counter->num_active > 0)
goto reset_entity_pointer;
- rb_erase(&bfqq->weight_counter->weights_node, root);
+ rb_erase_cached(&bfqq->weight_counter->weights_node, root);
kfree(bfqq->weight_counter);
reset_entity_pointer:
@@ -889,7 +906,7 @@ static unsigned long bfq_serv_to_charge(struct request *rq,
struct bfq_queue *bfqq)
{
if (bfq_bfqq_sync(bfqq) || bfqq->wr_coeff > 1 ||
- !bfq_symmetric_scenario(bfqq->bfqd))
+ bfq_asymmetric_scenario(bfqq->bfqd, bfqq))
return blk_rq_sectors(rq);
return blk_rq_sectors(rq) * bfq_async_charge_factor;
@@ -2543,7 +2560,7 @@ static void bfq_arm_slice_timer(struct bfq_data *bfqd)
* queue).
*/
if (BFQQ_SEEKY(bfqq) && bfqq->wr_coeff == 1 &&
- bfq_symmetric_scenario(bfqd))
+ !bfq_asymmetric_scenario(bfqd, bfqq))
sl = min_t(u64, sl, BFQ_MIN_TT);
else if (bfqq->wr_coeff > 1)
sl = max_t(u32, sl, 20ULL * NSEC_PER_MSEC);
@@ -3500,8 +3517,9 @@ static bool idling_boosts_thr_without_issues(struct bfq_data *bfqd,
}
/*
- * There is a case where idling must be performed not for
- * throughput concerns, but to preserve service guarantees.
+ * There is a case where idling does not have to be performed for
+ * throughput concerns, but to preserve the throughput share of
+ * the process associated with bfqq.
*
* To introduce this case, we can note that allowing the drive
* to enqueue more than one request at a time, and hence
@@ -3517,77 +3535,83 @@ static bool idling_boosts_thr_without_issues(struct bfq_data *bfqd,
* concern about per-process throughput distribution, and
* makes its decisions only on a per-request basis. Therefore,
* the service distribution enforced by the drive's internal
- * scheduler is likely to coincide with the desired
- * device-throughput distribution only in a completely
- * symmetric scenario where:
- * (i) each of these processes must get the same throughput as
- * the others;
- * (ii) the I/O of each process has the same properties, in
- * terms of locality (sequential or random), direction
- * (reads or writes), request sizes, greediness
- * (from I/O-bound to sporadic), and so on.
- * In fact, in such a scenario, the drive tends to treat
- * the requests of each of these processes in about the same
- * way as the requests of the others, and thus to provide
- * each of these processes with about the same throughput
- * (which is exactly the desired throughput distribution). In
- * contrast, in any asymmetric scenario, device idling is
- * certainly needed to guarantee that bfqq receives its
- * assigned fraction of the device throughput (see [1] for
- * details).
- * The problem is that idling may significantly reduce
- * throughput with certain combinations of types of I/O and
- * devices. An important example is sync random I/O, on flash
- * storage with command queueing. So, unless bfqq falls in the
- * above cases where idling also boosts throughput, it would
- * be important to check conditions (i) and (ii) accurately,
- * so as to avoid idling when not strictly needed for service
- * guarantees.
+ * scheduler is likely to coincide with the desired throughput
+ * distribution only in a completely symmetric, or favorably
+ * skewed scenario where:
+ * (i-a) each of these processes must get the same throughput as
+ * the others,
+ * (i-b) in case (i-a) does not hold, it holds that the process
+ * associated with bfqq must receive a lower or equal
+ * throughput than any of the other processes;
+ * (ii) the I/O of each process has the same properties, in
+ * terms of locality (sequential or random), direction
+ * (reads or writes), request sizes, greediness
+ * (from I/O-bound to sporadic), and so on;
+
+ * In fact, in such a scenario, the drive tends to treat the requests
+ * of each process in about the same way as the requests of the
+ * others, and thus to provide each of these processes with about the
+ * same throughput. This is exactly the desired throughput
+ * distribution if (i-a) holds, or, if (i-b) holds instead, this is an
+ * even more convenient distribution for (the process associated with)
+ * bfqq.
+ *
+ * In contrast, in any asymmetric or unfavorable scenario, device
+ * idling (I/O-dispatch plugging) is certainly needed to guarantee
+ * that bfqq receives its assigned fraction of the device throughput
+ * (see [1] for details).
+ *
+ * The problem is that idling may significantly reduce throughput with
+ * certain combinations of types of I/O and devices. An important
+ * example is sync random I/O on flash storage with command
+ * queueing. So, unless bfqq falls in cases where idling also boosts
+ * throughput, it is important to check conditions (i-a), i(-b) and
+ * (ii) accurately, so as to avoid idling when not strictly needed for
+ * service guarantees.
*
- * Unfortunately, it is extremely difficult to thoroughly
- * check condition (ii). And, in case there are active groups,
- * it becomes very difficult to check condition (i) too. In
- * fact, if there are active groups, then, for condition (i)
- * to become false, it is enough that an active group contains
- * more active processes or sub-groups than some other active
- * group. More precisely, for condition (i) to hold because of
- * such a group, it is not even necessary that the group is
- * (still) active: it is sufficient that, even if the group
- * has become inactive, some of its descendant processes still
- * have some request already dispatched but still waiting for
- * completion. In fact, requests have still to be guaranteed
- * their share of the throughput even after being
- * dispatched. In this respect, it is easy to show that, if a
- * group frequently becomes inactive while still having
- * in-flight requests, and if, when this happens, the group is
- * not considered in the calculation of whether the scenario
- * is asymmetric, then the group may fail to be guaranteed its
- * fair share of the throughput (basically because idling may
- * not be performed for the descendant processes of the group,
- * but it had to be). We address this issue with the
- * following bi-modal behavior, implemented in the function
- * bfq_symmetric_scenario().
+ * Unfortunately, it is extremely difficult to thoroughly check
+ * condition (ii). And, in case there are active groups, it becomes
+ * very difficult to check conditions (i-a) and (i-b) too. In fact,
+ * if there are active groups, then, for conditions (i-a) or (i-b) to
+ * become false 'indirectly', it is enough that an active group
+ * contains more active processes or sub-groups than some other active
+ * group. More precisely, for conditions (i-a) or (i-b) to become
+ * false because of such a group, it is not even necessary that the
+ * group is (still) active: it is sufficient that, even if the group
+ * has become inactive, some of its descendant processes still have
+ * some request already dispatched but still waiting for
+ * completion. In fact, requests have still to be guaranteed their
+ * share of the throughput even after being dispatched. In this
+ * respect, it is easy to show that, if a group frequently becomes
+ * inactive while still having in-flight requests, and if, when this
+ * happens, the group is not considered in the calculation of whether
+ * the scenario is asymmetric, then the group may fail to be
+ * guaranteed its fair share of the throughput (basically because
+ * idling may not be performed for the descendant processes of the
+ * group, but it had to be). We address this issue with the following
+ * bi-modal behavior, implemented in the function
+ * bfq_asymmetric_scenario().
*
* If there are groups with requests waiting for completion
* (as commented above, some of these groups may even be
* already inactive), then the scenario is tagged as
* asymmetric, conservatively, without checking any of the
- * conditions (i) and (ii). So the device is idled for bfqq.
+ * conditions (i-a), (i-b) or (ii). So the device is idled for bfqq.
* This behavior matches also the fact that groups are created
* exactly if controlling I/O is a primary concern (to
* preserve bandwidth and latency guarantees).
*
- * On the opposite end, if there are no groups with requests
- * waiting for completion, then only condition (i) is actually
- * controlled, i.e., provided that condition (i) holds, idling
- * is not performed, regardless of whether condition (ii)
- * holds. In other words, only if condition (i) does not hold,
- * then idling is allowed, and the device tends to be
- * prevented from queueing many requests, possibly of several
- * processes. Since there are no groups with requests waiting
- * for completion, then, to control condition (i) it is enough
- * to check just whether all the queues with requests waiting
- * for completion also have the same weight.
+ * On the opposite end, if there are no groups with requests waiting
+ * for completion, then only conditions (i-a) and (i-b) are actually
+ * controlled, i.e., provided that conditions (i-a) or (i-b) holds,
+ * idling is not performed, regardless of whether condition (ii)
+ * holds. In other words, only if conditions (i-a) and (i-b) do not
+ * hold, then idling is allowed, and the device tends to be prevented
+ * from queueing many requests, possibly of several processes. Since
+ * there are no groups with requests waiting for completion, then, to
+ * control conditions (i-a) and (i-b) it is enough to check just
+ * whether all the queues with requests waiting for completion also
+ * have the same weight.
*
* Not checking condition (ii) evidently exposes bfqq to the
* risk of getting less throughput than its fair share.
@@ -3639,7 +3663,7 @@ static bool idling_boosts_thr_without_issues(struct bfq_data *bfqd,
* compound condition that is checked below for deciding
* whether the scenario is asymmetric. To explain this
* compound condition, we need to add that the function
- * bfq_symmetric_scenario checks the weights of only
+ * bfq_asymmetric_scenario checks the weights of only
* non-weight-raised queues, for efficiency reasons (see
* comments on bfq_weights_tree_add()). Then the fact that
* bfqq is weight-raised is checked explicitly here. More
@@ -3667,7 +3691,7 @@ static bool idling_needed_for_service_guarantees(struct bfq_data *bfqd,
return (bfqq->wr_coeff > 1 &&
bfqd->wr_busy_queues <
bfq_tot_busy_queues(bfqd)) ||
- !bfq_symmetric_scenario(bfqd);
+ bfq_asymmetric_scenario(bfqd, bfqq);
}
/*
@@ -5505,7 +5529,7 @@ static int bfq_init_queue(struct request_queue *q, struct elevator_type *e)
HRTIMER_MODE_REL);
bfqd->idle_slice_timer.function = bfq_idle_slice_timer;
- bfqd->queue_weights_tree = RB_ROOT;
+ bfqd->queue_weights_tree = RB_ROOT_CACHED;
bfqd->num_groups_with_pending_reqs = 0;
INIT_LIST_HEAD(&bfqd->active_list);
diff --git a/block/bfq-iosched.h b/block/bfq-iosched.h
index 062e1c4787f4..81cabf51a87e 100644
--- a/block/bfq-iosched.h
+++ b/block/bfq-iosched.h
@@ -450,7 +450,7 @@ struct bfq_data {
* weight-raised @bfq_queue (see the comments to the functions
* bfq_weights_tree_[add|remove] for further details).
*/
- struct rb_root queue_weights_tree;
+ struct rb_root_cached queue_weights_tree;
/*
* Number of groups with at least one descendant process that
@@ -898,10 +898,10 @@ void bic_set_bfqq(struct bfq_io_cq *bic, struct bfq_queue *bfqq, bool is_sync);
struct bfq_data *bic_to_bfqd(struct bfq_io_cq *bic);
void bfq_pos_tree_add_move(struct bfq_data *bfqd, struct bfq_queue *bfqq);
void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
- struct rb_root *root);
+ struct rb_root_cached *root);
void __bfq_weights_tree_remove(struct bfq_data *bfqd,
struct bfq_queue *bfqq,
- struct rb_root *root);
+ struct rb_root_cached *root);
void bfq_weights_tree_remove(struct bfq_data *bfqd,
struct bfq_queue *bfqq);
void bfq_bfqq_expire(struct bfq_data *bfqd, struct bfq_queue *bfqq,
diff --git a/block/bfq-wf2q.c b/block/bfq-wf2q.c
index a11bef75483d..51ef1f00df80 100644
--- a/block/bfq-wf2q.c
+++ b/block/bfq-wf2q.c
@@ -737,7 +737,7 @@ __bfq_entity_update_weight_prio(struct bfq_service_tree *old_st,
struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
unsigned int prev_weight, new_weight;
struct bfq_data *bfqd = NULL;
- struct rb_root *root;
+ struct rb_root_cached *root;
#ifdef CONFIG_BFQ_GROUP_IOSCHED
struct bfq_sched_data *sd;
struct bfq_group *bfqg;