diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
-rw-r--r-- | drivers/ata/libata-core.c | 156 |
1 files changed, 139 insertions, 17 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 74314311295f..d8cc1e27a125 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1973,6 +1973,96 @@ retry: } /** + * ata_dev_power_set_standby - Set a device power mode to standby + * @dev: target device + * + * Issue a STANDBY IMMEDIATE command to set a device power mode to standby. + * For an HDD device, this spins down the disks. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_dev_power_set_standby(struct ata_device *dev) +{ + unsigned long ap_flags = dev->link->ap->flags; + struct ata_taskfile tf; + unsigned int err_mask; + + /* Issue STANDBY IMMEDIATE command only if supported by the device */ + if (dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC) + return; + + /* + * Some odd clown BIOSes issue spindown on power off (ACPI S4 or S5) + * causing some drives to spin up and down again. For these, do nothing + * if we are being called on shutdown. + */ + if ((ap_flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) && + system_state == SYSTEM_POWER_OFF) + return; + + if ((ap_flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) && + system_entering_hibernation()) + return; + + ata_tf_init(dev, &tf); + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf.protocol = ATA_PROT_NODATA; + tf.command = ATA_CMD_STANDBYNOW1; + + ata_dev_notice(dev, "Entering standby power mode\n"); + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (err_mask) + ata_dev_err(dev, "STANDBY IMMEDIATE failed (err_mask=0x%x)\n", + err_mask); +} + +/** + * ata_dev_power_set_active - Set a device power mode to active + * @dev: target device + * + * Issue a VERIFY command to enter to ensure that the device is in the + * active power mode. For a spun-down HDD (standby or idle power mode), + * the VERIFY command will complete after the disk spins up. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_dev_power_set_active(struct ata_device *dev) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + /* + * Issue READ VERIFY SECTORS command for 1 sector at lba=0 only + * if supported by the device. + */ + if (dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC) + return; + + ata_tf_init(dev, &tf); + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf.protocol = ATA_PROT_NODATA; + tf.command = ATA_CMD_VERIFY; + tf.nsect = 1; + if (dev->flags & ATA_DFLAG_LBA) { + tf.flags |= ATA_TFLAG_LBA; + tf.device |= ATA_LBA; + } else { + /* CHS */ + tf.lbal = 0x1; /* sect */ + } + + ata_dev_notice(dev, "Entering active power mode\n"); + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (err_mask) + ata_dev_err(dev, "VERIFY failed (err_mask=0x%x)\n", + err_mask); +} + +/** * ata_read_log_page - read a specific log page * @dev: target device * @log: log to read @@ -2529,7 +2619,7 @@ static int ata_dev_config_lba(struct ata_device *dev) { const u16 *id = dev->id; const char *lba_desc; - char ncq_desc[24]; + char ncq_desc[32]; int ret; dev->flags |= ATA_DFLAG_LBA; @@ -4783,11 +4873,8 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * been aborted by the device due to a limit timeout using the policy * 0xD. For these commands, invoke EH to get the command sense data. */ - if (qc->result_tf.status & ATA_SENSE && - ((ata_is_ncq(qc->tf.protocol) && - dev->flags & ATA_DFLAG_CDL_ENABLED) || - (!ata_is_ncq(qc->tf.protocol) && - ata_id_sense_reporting_enabled(dev->id)))) { + if (qc->flags & ATA_QCFLAG_HAS_CDL && + qc->result_tf.status & ATA_SENSE) { /* * Tell SCSI EH to not overwrite scmd->result even if this * command is finished with result SAM_STAT_GOOD. @@ -5040,17 +5127,19 @@ static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, struct ata_link *link; unsigned long flags; - /* Previous resume operation might still be in - * progress. Wait for PM_PENDING to clear. + spin_lock_irqsave(ap->lock, flags); + + /* + * A previous PM operation might still be in progress. Wait for + * ATA_PFLAG_PM_PENDING to clear. */ if (ap->pflags & ATA_PFLAG_PM_PENDING) { + spin_unlock_irqrestore(ap->lock, flags); ata_port_wait_eh(ap); - WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + spin_lock_irqsave(ap->lock, flags); } - /* request PM ops to EH */ - spin_lock_irqsave(ap->lock, flags); - + /* Request PM operation to EH */ ap->pm_mesg = mesg; ap->pflags |= ATA_PFLAG_PM_PENDING; ata_for_each_link(link, ap, HOST_FIRST) { @@ -5062,10 +5151,8 @@ static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, spin_unlock_irqrestore(ap->lock, flags); - if (!async) { + if (!async) ata_port_wait_eh(ap); - WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); - } } /* @@ -5081,11 +5168,27 @@ static const unsigned int ata_port_suspend_ehi = ATA_EHI_QUIET static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg) { + /* + * We are about to suspend the port, so we do not care about + * scsi_rescan_device() calls scheduled by previous resume operations. + * The next resume will schedule the rescan again. So cancel any rescan + * that is not done yet. + */ + cancel_delayed_work_sync(&ap->scsi_rescan_task); + ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, false); } static void ata_port_suspend_async(struct ata_port *ap, pm_message_t mesg) { + /* + * We are about to suspend the port, so we do not care about + * scsi_rescan_device() calls scheduled by previous resume operations. + * The next resume will schedule the rescan again. So cancel any rescan + * that is not done yet. + */ + cancel_delayed_work_sync(&ap->scsi_rescan_task); + ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, true); } @@ -5232,7 +5335,7 @@ EXPORT_SYMBOL_GPL(ata_host_resume); #endif const struct device_type ata_port_type = { - .name = "ata_port", + .name = ATA_PORT_TYPE_NAME, #ifdef CONFIG_PM .pm = &ata_port_pm_ops, #endif @@ -5951,11 +6054,30 @@ static void ata_port_detach(struct ata_port *ap) struct ata_link *link; struct ata_device *dev; - /* tell EH we're leaving & flush EH */ + /* Wait for any ongoing EH */ + ata_port_wait_eh(ap); + + mutex_lock(&ap->scsi_scan_mutex); spin_lock_irqsave(ap->lock, flags); + + /* Remove scsi devices */ + ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_dev(dev, link, ALL) { + if (dev->sdev) { + spin_unlock_irqrestore(ap->lock, flags); + scsi_remove_device(dev->sdev); + spin_lock_irqsave(ap->lock, flags); + dev->sdev = NULL; + } + } + } + + /* Tell EH to disable all devices */ ap->pflags |= ATA_PFLAG_UNLOADING; ata_port_schedule_eh(ap); + spin_unlock_irqrestore(ap->lock, flags); + mutex_unlock(&ap->scsi_scan_mutex); /* wait till EH commits suicide */ ata_port_wait_eh(ap); |