diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/ahci.c | 9 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 35 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 7 | ||||
-rw-r--r-- | drivers/ata/libata-eh.c | 16 | ||||
-rw-r--r-- | drivers/ata/libata-sata.c | 19 | ||||
-rw-r--r-- | drivers/ata/libata-scsi.c | 3 | ||||
-rw-r--r-- | drivers/ata/pata_parport/comm.c | 9 | ||||
-rw-r--r-- | drivers/ata/sata_mv.c | 4 |
8 files changed, 62 insertions, 40 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index abb5911c9d09..08745e7db820 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1883,6 +1883,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) else dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n"); + if (!(hpriv->cap & HOST_CAP_PART)) + host->flags |= ATA_HOST_NO_PART; + + if (!(hpriv->cap & HOST_CAP_SSC)) + host->flags |= ATA_HOST_NO_SSC; + + if (!(hpriv->cap2 & HOST_CAP2_SDS)) + host->flags |= ATA_HOST_NO_DEVSLP; + if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index e2bacedf28ef..f1263364fa97 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1256,6 +1256,26 @@ static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) return sprintf(buf, "%d\n", emp->blink_policy); } +static void ahci_port_clear_pending_irq(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + + /* clear SError */ + tmp = readl(port_mmio + PORT_SCR_ERR); + dev_dbg(ap->host->dev, "PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* clear port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + dev_dbg(ap->host->dev, "PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << ap->port_no, hpriv->mmio + HOST_IRQ_STAT); +} + static void ahci_port_init(struct device *dev, struct ata_port *ap, int port_no, void __iomem *mmio, void __iomem *port_mmio) @@ -1270,18 +1290,7 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap, if (rc) dev_warn(dev, "%s (%d)\n", emsg, rc); - /* clear SError */ - tmp = readl(port_mmio + PORT_SCR_ERR); - dev_dbg(dev, "PORT_SCR_ERR 0x%x\n", tmp); - writel(tmp, port_mmio + PORT_SCR_ERR); - - /* clear port IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - dev_dbg(dev, "PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - - writel(1 << port_no, mmio + HOST_IRQ_STAT); + ahci_port_clear_pending_irq(ap); /* mark esata ports */ tmp = readl(port_mmio + PORT_CMD); @@ -1603,6 +1612,8 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class, tf.status = ATA_BUSY; ata_tf_to_fis(&tf, 0, 0, d2h_fis); + ahci_port_clear_pending_irq(ap); + rc = sata_link_hardreset(link, timing, deadline, online, ahci_check_ready); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 74314311295f..0072e0f9ad39 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4783,11 +4783,8 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * been aborted by the device due to a limit timeout using the policy * 0xD. For these commands, invoke EH to get the command sense data. */ - if (qc->result_tf.status & ATA_SENSE && - ((ata_is_ncq(qc->tf.protocol) && - dev->flags & ATA_DFLAG_CDL_ENABLED) || - (!ata_is_ncq(qc->tf.protocol) && - ata_id_sense_reporting_enabled(dev->id)))) { + if (qc->flags & ATA_QCFLAG_HAS_CDL && + qc->result_tf.status & ATA_SENSE) { /* * Tell SCSI EH to not overwrite scmd->result even if this * command is finished with result SAM_STAT_GOOD. diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 159ba6ba19eb..4cf4f57e57b8 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2796,23 +2796,13 @@ int ata_eh_reset(struct ata_link *link, int classify, } } - /* - * Some controllers can't be frozen very well and may set spurious - * error conditions during reset. Clear accumulated error - * information and re-thaw the port if frozen. As reset is the - * final recovery action and we cross check link onlineness against - * device classification later, no hotplug event is lost by this. - */ + /* clear cached SError */ spin_lock_irqsave(link->ap->lock, flags); - memset(&link->eh_info, 0, sizeof(link->eh_info)); + link->eh_info.serror = 0; if (slave) - memset(&slave->eh_info, 0, sizeof(link->eh_info)); - ap->pflags &= ~ATA_PFLAG_EH_PENDING; + slave->eh_info.serror = 0; spin_unlock_irqrestore(link->ap->lock, flags); - if (ata_port_is_frozen(ap)) - ata_eh_thaw_port(ap); - /* * Make sure onlineness and classification result correspond. * Hotplug could have happened during reset and some diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index 5d31c08be013..a701e1538482 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -396,10 +396,23 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, case ATA_LPM_MED_POWER_WITH_DIPM: case ATA_LPM_MIN_POWER_WITH_PARTIAL: case ATA_LPM_MIN_POWER: - if (ata_link_nr_enabled(link) > 0) - /* no restrictions on LPM transitions */ + if (ata_link_nr_enabled(link) > 0) { + /* assume no restrictions on LPM transitions */ scontrol &= ~(0x7 << 8); - else { + + /* + * If the controller does not support partial, slumber, + * or devsleep, then disallow these transitions. + */ + if (link->ap->host->flags & ATA_HOST_NO_PART) + scontrol |= (0x1 << 8); + + if (link->ap->host->flags & ATA_HOST_NO_SSC) + scontrol |= (0x2 << 8); + + if (link->ap->host->flags & ATA_HOST_NO_DEVSLP) + scontrol |= (0x4 << 8); + } else { /* empty port, power off */ scontrol &= ~0xf; scontrol |= (0x1 << 2); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d3f28b82c97b..0e96ed408c71 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1835,6 +1835,9 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) hdr[2] = 0x7; /* claim SPC-5 version compatibility */ } + if (args->dev->flags & ATA_DFLAG_CDL) + hdr[2] = 0xd; /* claim SPC-6 version compatibility */ + memcpy(rbuf, hdr, sizeof(hdr)); memcpy(&rbuf[8], "ATA ", 8); ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16); diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c index 4839becbbd56..94b8d352102e 100644 --- a/drivers/ata/pata_parport/comm.c +++ b/drivers/ata/pata_parport/comm.c @@ -37,7 +37,7 @@ static int comm_read_regr(struct pi_adapter *pi, int cont, int regr) { int l, h, r; - r = regr + cont_map[cont]; + r = regr + cont_map[cont]; switch (pi->mode) { case 0: @@ -90,7 +90,6 @@ static void comm_connect(struct pi_adapter *pi) } static void comm_disconnect(struct pi_adapter *pi) - { w2(0); w2(0); w2(0); w2(4); w0(pi->saved_r0); @@ -172,12 +171,12 @@ static void comm_write_block(struct pi_adapter *pi, char *buf, int count) w4l(swab16(((u16 *)buf)[2 * k]) | swab16(((u16 *)buf)[2 * k + 1]) << 16); break; - } + } } static void comm_log_adapter(struct pi_adapter *pi) - -{ char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" }; +{ + char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" }; dev_info(&pi->dev, "DataStor Commuter at 0x%x, mode %d (%s), delay %d\n", diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index d105db5c7d81..45e48d653c60 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1255,8 +1255,8 @@ static void mv_dump_mem(struct device *dev, void __iomem *start, unsigned bytes) for (b = 0; b < bytes; ) { for (w = 0, o = 0; b < bytes && w < 4; w++) { - o += snprintf(linebuf + o, sizeof(linebuf) - o, - "%08x ", readl(start + b)); + o += scnprintf(linebuf + o, sizeof(linebuf) - o, + "%08x ", readl(start + b)); b += sizeof(u32); } dev_dbg(dev, "%s: %p: %s\n", |