diff options
Diffstat (limited to 'drivers/block/paride/Kconfig')
| -rw-r--r-- | drivers/block/paride/Kconfig | 302 |
1 files changed, 0 insertions, 302 deletions
diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig deleted file mode 100644 index a295634597ba..000000000000 --- a/drivers/block/paride/Kconfig +++ /dev/null @@ -1,302 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# PARIDE configuration -# -# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module, -# PARIDE must also be a module. -# PARIDE only supports PC style parports. Tough for USB or other parports... - -comment "Parallel IDE high-level drivers" - depends on PARIDE - -config PARIDE_PD - tristate "Parallel port IDE disks" - depends on PARIDE - help - This option enables the high-level driver for IDE-type disk devices - connected through a parallel port. If you chose to build PARIDE - support into your kernel, you may answer Y here to build in the - parallel port IDE driver, otherwise you should answer M to build - it as a loadable module. The module will be called pd. You - must also have at least one parallel port protocol driver in your - system. Among the devices supported by this driver are the SyQuest - EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack - hard drives from MicroSolutions. - -config PARIDE_PCD - tristate "Parallel port ATAPI CD-ROMs" - depends on PARIDE - select CDROM - help - This option enables the high-level driver for ATAPI CD-ROM devices - connected through a parallel port. If you chose to build PARIDE - support into your kernel, you may answer Y here to build in the - parallel port ATAPI CD-ROM driver, otherwise you should answer M to - build it as a loadable module. The module will be called pcd. You - must also have at least one parallel port protocol driver in your - system. Among the devices supported by this driver are the - MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If - you have such a CD-ROM drive, you should also say Y or M to "ISO - 9660 CD-ROM file system support" below, because that's the file - system used on CD-ROMs. - -config PARIDE_PF - tristate "Parallel port ATAPI disks" - depends on PARIDE - help - This option enables the high-level driver for ATAPI disk devices - connected through a parallel port. If you chose to build PARIDE - support into your kernel, you may answer Y here to build in the - parallel port ATAPI disk driver, otherwise you should answer M - to build it as a loadable module. The module will be called pf. - You must also have at least one parallel port protocol driver in - your system. Among the devices supported by this driver are the - MicroSolutions backpack PD/CD drive and the Imation Superdisk - LS-120 drive. - -config PARIDE_PT - tristate "Parallel port ATAPI tapes" - depends on PARIDE - help - This option enables the high-level driver for ATAPI tape devices - connected through a parallel port. If you chose to build PARIDE - support into your kernel, you may answer Y here to build in the - parallel port ATAPI disk driver, otherwise you should answer M - to build it as a loadable module. The module will be called pt. - You must also have at least one parallel port protocol driver in - your system. Among the devices supported by this driver is the - parallel port version of the HP 5GB drive. - -config PARIDE_PG - tristate "Parallel port generic ATAPI devices" - depends on PARIDE - help - This option enables a special high-level driver for generic ATAPI - devices connected through a parallel port. The driver allows user - programs, such as cdrtools, to send ATAPI commands directly to a - device. - - If you chose to build PARIDE support into your kernel, you may - answer Y here to build in the parallel port generic ATAPI driver, - otherwise you should answer M to build it as a loadable module. The - module will be called pg. - - You must also have at least one parallel port protocol driver in - your system. - - This driver implements an API loosely related to the generic SCSI - driver. See <file:include/linux/pg.h>. for details. - - You can obtain the most recent version of cdrtools from - <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and - later fully support this driver. - -comment "Parallel IDE protocol modules" - depends on PARIDE - -config PARIDE_ATEN - tristate "ATEN EH-100 protocol" - depends on PARIDE - help - This option enables support for the ATEN EH-100 parallel port IDE - protocol. This protocol is used in some inexpensive low performance - parallel port kits made in Hong Kong. If you chose to build PARIDE - support into your kernel, you may answer Y here to build in the - protocol driver, otherwise you should answer M to build it as a - loadable module. The module will be called aten. You must also - have a high-level driver for the type of device that you want to - support. - -config PARIDE_BPCK - tristate "MicroSolutions backpack (Series 5) protocol" - depends on PARIDE - help - This option enables support for the Micro Solutions BACKPACK - parallel port Series 5 IDE protocol. (Most BACKPACK drives made - before 1999 were Series 5) Series 5 drives will NOT always have the - Series noted on the bottom of the drive. Series 6 drivers will. - - In other words, if your BACKPACK drive doesn't say "Series 6" on the - bottom, enable this option. - - If you chose to build PARIDE support into your kernel, you may - answer Y here to build in the protocol driver, otherwise you should - answer M to build it as a loadable module. The module will be - called bpck. You must also have a high-level driver for the type - of device that you want to support. - -config PARIDE_BPCK6 - tristate "MicroSolutions backpack (Series 6) protocol" - depends on PARIDE && !64BIT - help - This option enables support for the Micro Solutions BACKPACK - parallel port Series 6 IDE protocol. (Most BACKPACK drives made - after 1999 were Series 6) Series 6 drives will have the Series noted - on the bottom of the drive. Series 5 drivers don't always have it - noted. - - In other words, if your BACKPACK drive says "Series 6" on the - bottom, enable this option. - - If you chose to build PARIDE support into your kernel, you may - answer Y here to build in the protocol driver, otherwise you should - answer M to build it as a loadable module. The module will be - called bpck6. You must also have a high-level driver for the type - of device that you want to support. - -config PARIDE_COMM - tristate "DataStor Commuter protocol" - depends on PARIDE - help - This option enables support for the Commuter parallel port IDE - protocol from DataStor. If you chose to build PARIDE support - into your kernel, you may answer Y here to build in the protocol - driver, otherwise you should answer M to build it as a loadable - module. The module will be called comm. You must also have - a high-level driver for the type of device that you want to support. - -config PARIDE_DSTR - tristate "DataStor EP-2000 protocol" - depends on PARIDE - help - This option enables support for the EP-2000 parallel port IDE - protocol from DataStor. If you chose to build PARIDE support - into your kernel, you may answer Y here to build in the protocol - driver, otherwise you should answer M to build it as a loadable - module. The module will be called dstr. You must also have - a high-level driver for the type of device that you want to support. - -config PARIDE_FIT2 - tristate "FIT TD-2000 protocol" - depends on PARIDE - help - This option enables support for the TD-2000 parallel port IDE - protocol from Fidelity International Technology. This is a simple - (low speed) adapter that is used in some portable hard drives. If - you chose to build PARIDE support into your kernel, you may answer Y - here to build in the protocol driver, otherwise you should answer M - to build it as a loadable module. The module will be called ktti. - You must also have a high-level driver for the type of device that - you want to support. - -config PARIDE_FIT3 - tristate "FIT TD-3000 protocol" - depends on PARIDE - help - This option enables support for the TD-3000 parallel port IDE - protocol from Fidelity International Technology. This protocol is - used in newer models of their portable disk, CD-ROM and PD/CD - devices. If you chose to build PARIDE support into your kernel, you - may answer Y here to build in the protocol driver, otherwise you - should answer M to build it as a loadable module. The module will be - called fit3. You must also have a high-level driver for the type - of device that you want to support. - -config PARIDE_EPAT - tristate "Shuttle EPAT/EPEZ protocol" - depends on PARIDE - help - This option enables support for the EPAT parallel port IDE protocol. - EPAT is a parallel port IDE adapter manufactured by Shuttle - Technology and widely used in devices from major vendors such as - Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build - PARIDE support into your kernel, you may answer Y here to build in - the protocol driver, otherwise you should answer M to build it as a - loadable module. The module will be called epat. You must also - have a high-level driver for the type of device that you want to - support. - -config PARIDE_EPATC8 - bool "Support c7/c8 chips" - depends on PARIDE_EPAT - help - This option enables support for the newer Shuttle EP1284 (aka c7 and - c8) chip. You need this if you are using any recent Imation SuperDisk - (LS-120) drive. - -config PARIDE_EPIA - tristate "Shuttle EPIA protocol" - depends on PARIDE - help - This option enables support for the (obsolete) EPIA parallel port - IDE protocol from Shuttle Technology. This adapter can still be - found in some no-name kits. If you chose to build PARIDE support - into your kernel, you may answer Y here to build in the protocol - driver, otherwise you should answer M to build it as a loadable - module. The module will be called epia. You must also have a - high-level driver for the type of device that you want to support. - -config PARIDE_FRIQ - tristate "Freecom IQ ASIC-2 protocol" - depends on PARIDE - help - This option enables support for version 2 of the Freecom IQ parallel - port IDE adapter. This adapter is used by the Maxell Superdisk - drive. If you chose to build PARIDE support into your kernel, you - may answer Y here to build in the protocol driver, otherwise you - should answer M to build it as a loadable module. The module will be - called friq. You must also have a high-level driver for the type - of device that you want to support. - -config PARIDE_FRPW - tristate "FreeCom power protocol" - depends on PARIDE - help - This option enables support for the Freecom power parallel port IDE - protocol. If you chose to build PARIDE support into your kernel, you - may answer Y here to build in the protocol driver, otherwise you - should answer M to build it as a loadable module. The module will be - called frpw. You must also have a high-level driver for the type - of device that you want to support. - -config PARIDE_KBIC - tristate "KingByte KBIC-951A/971A protocols" - depends on PARIDE - help - This option enables support for the KBIC-951A and KBIC-971A parallel - port IDE protocols from KingByte Information Corp. KingByte's - adapters appear in many no-name portable disk and CD-ROM products, - especially in Europe. If you chose to build PARIDE support into your - kernel, you may answer Y here to build in the protocol driver, - otherwise you should answer M to build it as a loadable module. The - module will be called kbic. You must also have a high-level driver - for the type of device that you want to support. - -config PARIDE_KTTI - tristate "KT PHd protocol" - depends on PARIDE - help - This option enables support for the "PHd" parallel port IDE protocol - from KT Technology. This is a simple (low speed) adapter that is - used in some 2.5" portable hard drives. If you chose to build PARIDE - support into your kernel, you may answer Y here to build in the - protocol driver, otherwise you should answer M to build it as a - loadable module. The module will be called ktti. You must also - have a high-level driver for the type of device that you want to - support. - -config PARIDE_ON20 - tristate "OnSpec 90c20 protocol" - depends on PARIDE - help - This option enables support for the (obsolete) 90c20 parallel port - IDE protocol from OnSpec (often marketed under the ValuStore brand - name). If you chose to build PARIDE support into your kernel, you - may answer Y here to build in the protocol driver, otherwise you - should answer M to build it as a loadable module. The module will - be called on20. You must also have a high-level driver for the - type of device that you want to support. - -config PARIDE_ON26 - tristate "OnSpec 90c26 protocol" - depends on PARIDE - help - This option enables support for the 90c26 parallel port IDE protocol - from OnSpec Electronics (often marketed under the ValuStore brand - name). If you chose to build PARIDE support into your kernel, you - may answer Y here to build in the protocol driver, otherwise you - should answer M to build it as a loadable module. The module will be - called on26. You must also have a high-level driver for the type - of device that you want to support. - -# |