summaryrefslogtreecommitdiff
path: root/drivers/devfreq
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/devfreq')
-rw-r--r--drivers/devfreq/Kconfig12
-rw-r--r--drivers/devfreq/Makefile3
-rw-r--r--drivers/devfreq/devfreq.c25
-rw-r--r--drivers/devfreq/exynos/Makefile3
-rw-r--r--drivers/devfreq/exynos/exynos4_bus.c (renamed from drivers/devfreq/exynos4_bus.c)1
-rw-r--r--drivers/devfreq/exynos/exynos5_bus.c503
-rw-r--r--drivers/devfreq/exynos/exynos_ppmu.c56
-rw-r--r--drivers/devfreq/exynos/exynos_ppmu.h78
8 files changed, 676 insertions, 5 deletions
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 0f079be13305..31f3adba4cf3 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -67,7 +67,7 @@ comment "DEVFREQ Drivers"
config ARM_EXYNOS4_BUS_DEVFREQ
bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver"
- depends on CPU_EXYNOS4210 || CPU_EXYNOS4212 || CPU_EXYNOS4412
+ depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412
select ARCH_HAS_OPP
select DEVFREQ_GOV_SIMPLE_ONDEMAND
help
@@ -78,4 +78,14 @@ config ARM_EXYNOS4_BUS_DEVFREQ
To operate with optimal voltages, ASV support is required
(CONFIG_EXYNOS_ASV).
+config ARM_EXYNOS5_BUS_DEVFREQ
+ bool "ARM Exynos5250 Bus DEVFREQ Driver"
+ depends on SOC_EXYNOS5250
+ select ARCH_HAS_OPP
+ select DEVFREQ_GOV_SIMPLE_ONDEMAND
+ help
+ This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int).
+ It reads PPMU counters of memory controllers and adjusts the
+ operating frequencies and voltages with OPP support.
+
endif # PM_DEVFREQ
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 8c464234f7e7..16138c9e0d58 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -5,4 +5,5 @@ obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE) += governor_powersave.o
obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o
# DEVFREQ Drivers
-obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o
+obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/
+obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index af8372feb587..e94e619fe050 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -271,6 +271,7 @@ void devfreq_monitor_suspend(struct devfreq *devfreq)
return;
}
+ devfreq_update_status(devfreq, devfreq->previous_freq);
devfreq->stop_polling = true;
mutex_unlock(&devfreq->lock);
cancel_delayed_work_sync(&devfreq->work);
@@ -287,6 +288,8 @@ EXPORT_SYMBOL(devfreq_monitor_suspend);
*/
void devfreq_monitor_resume(struct devfreq *devfreq)
{
+ unsigned long freq;
+
mutex_lock(&devfreq->lock);
if (!devfreq->stop_polling)
goto out;
@@ -295,8 +298,14 @@ void devfreq_monitor_resume(struct devfreq *devfreq)
devfreq->profile->polling_ms)
queue_delayed_work(devfreq_wq, &devfreq->work,
msecs_to_jiffies(devfreq->profile->polling_ms));
+
+ devfreq->last_stat_updated = jiffies;
devfreq->stop_polling = false;
+ if (devfreq->profile->get_cur_freq &&
+ !devfreq->profile->get_cur_freq(devfreq->dev.parent, &freq))
+ devfreq->previous_freq = freq;
+
out:
mutex_unlock(&devfreq->lock);
}
@@ -518,6 +527,8 @@ EXPORT_SYMBOL(devfreq_add_device);
/**
* devfreq_remove_device() - Remove devfreq feature from a device.
* @devfreq: the devfreq instance to be removed
+ *
+ * The opposite of devfreq_add_device().
*/
int devfreq_remove_device(struct devfreq *devfreq)
{
@@ -533,6 +544,10 @@ EXPORT_SYMBOL(devfreq_remove_device);
/**
* devfreq_suspend_device() - Suspend devfreq of a device.
* @devfreq: the devfreq instance to be suspended
+ *
+ * This function is intended to be called by the pm callbacks
+ * (e.g., runtime_suspend, suspend) of the device driver that
+ * holds the devfreq.
*/
int devfreq_suspend_device(struct devfreq *devfreq)
{
@@ -550,6 +565,10 @@ EXPORT_SYMBOL(devfreq_suspend_device);
/**
* devfreq_resume_device() - Resume devfreq of a device.
* @devfreq: the devfreq instance to be resumed
+ *
+ * This function is intended to be called by the pm callbacks
+ * (e.g., runtime_resume, resume) of the device driver that
+ * holds the devfreq.
*/
int devfreq_resume_device(struct devfreq *devfreq)
{
@@ -905,11 +924,11 @@ static ssize_t show_trans_table(struct device *dev, struct device_attribute *att
{
struct devfreq *devfreq = to_devfreq(dev);
ssize_t len;
- int i, j, err;
+ int i, j;
unsigned int max_state = devfreq->profile->max_state;
- err = devfreq_update_status(devfreq, devfreq->previous_freq);
- if (err)
+ if (!devfreq->stop_polling &&
+ devfreq_update_status(devfreq, devfreq->previous_freq))
return 0;
len = sprintf(buf, " From : To\n");
diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile
new file mode 100644
index 000000000000..bfaaf5b0d61d
--- /dev/null
+++ b/drivers/devfreq/exynos/Makefile
@@ -0,0 +1,3 @@
+# Exynos DEVFREQ Drivers
+obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o
+obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o exynos5_bus.o
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c
index 3f37f3b3f268..c5f86d8caca3 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos/exynos4_bus.c
@@ -974,6 +974,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
rcu_read_unlock();
dev_err(data->dev, "%s: unable to find a min freq\n",
__func__);
+ mutex_unlock(&data->lock);
return PTR_ERR(opp);
}
new_oppinfo.rate = opp_get_freq(opp);
diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c
new file mode 100644
index 000000000000..574b16b59be5
--- /dev/null
+++ b/drivers/devfreq/exynos/exynos5_bus.c
@@ -0,0 +1,503 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework
+ * Based on work done by Jonghwan Choi <jhbird.choi@samsung.com>
+ * Support for only EXYNOS5250 is present.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/devfreq.h>
+#include <linux/io.h>
+#include <linux/opp.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/opp.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/pm_qos.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include "exynos_ppmu.h"
+
+#define MAX_SAFEVOLT 1100000 /* 1.10V */
+/* Assume that the bus is saturated if the utilization is 25% */
+#define INT_BUS_SATURATION_RATIO 25
+
+enum int_level_idx {
+ LV_0,
+ LV_1,
+ LV_2,
+ LV_3,
+ LV_4,
+ _LV_END
+};
+
+enum exynos_ppmu_list {
+ PPMU_RIGHT,
+ PPMU_END,
+};
+
+struct busfreq_data_int {
+ struct device *dev;
+ struct devfreq *devfreq;
+ struct regulator *vdd_int;
+ struct exynos_ppmu ppmu[PPMU_END];
+ unsigned long curr_freq;
+ bool disabled;
+
+ struct notifier_block pm_notifier;
+ struct mutex lock;
+ struct pm_qos_request int_req;
+ struct clk *int_clk;
+};
+
+struct int_bus_opp_table {
+ unsigned int idx;
+ unsigned long clk;
+ unsigned long volt;
+};
+
+static struct int_bus_opp_table exynos5_int_opp_table[] = {
+ {LV_0, 266000, 1025000},
+ {LV_1, 200000, 1025000},
+ {LV_2, 160000, 1025000},
+ {LV_3, 133000, 1025000},
+ {LV_4, 100000, 1025000},
+ {0, 0, 0},
+};
+
+static void busfreq_mon_reset(struct busfreq_data_int *data)
+{
+ unsigned int i;
+
+ for (i = PPMU_RIGHT; i < PPMU_END; i++) {
+ void __iomem *ppmu_base = data->ppmu[i].hw_base;
+
+ /* Reset the performance and cycle counters */
+ exynos_ppmu_reset(ppmu_base);
+
+ /* Setup count registers to monitor read/write transactions */
+ data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT;
+ exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3,
+ data->ppmu[i].event[PPMU_PMNCNT3]);
+
+ exynos_ppmu_start(ppmu_base);
+ }
+}
+
+static void exynos5_read_ppmu(struct busfreq_data_int *data)
+{
+ int i, j;
+
+ for (i = PPMU_RIGHT; i < PPMU_END; i++) {
+ void __iomem *ppmu_base = data->ppmu[i].hw_base;
+
+ exynos_ppmu_stop(ppmu_base);
+
+ /* Update local data from PPMU */
+ data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT);
+
+ for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
+ if (data->ppmu[i].event[j] == 0)
+ data->ppmu[i].count[j] = 0;
+ else
+ data->ppmu[i].count[j] =
+ exynos_ppmu_read(ppmu_base, j);
+ }
+ }
+
+ busfreq_mon_reset(data);
+}
+
+static int exynos5_int_setvolt(struct busfreq_data_int *data,
+ unsigned long volt)
+{
+ return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT);
+}
+
+static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq,
+ u32 flags)
+{
+ int err = 0;
+ struct platform_device *pdev = container_of(dev, struct platform_device,
+ dev);
+ struct busfreq_data_int *data = platform_get_drvdata(pdev);
+ struct opp *opp;
+ unsigned long old_freq, freq;
+ unsigned long volt;
+
+ rcu_read_lock();
+ opp = devfreq_recommended_opp(dev, _freq, flags);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ dev_err(dev, "%s: Invalid OPP.\n", __func__);
+ return PTR_ERR(opp);
+ }
+
+ freq = opp_get_freq(opp);
+ volt = opp_get_voltage(opp);
+ rcu_read_unlock();
+
+ old_freq = data->curr_freq;
+
+ if (old_freq == freq)
+ return 0;
+
+ dev_dbg(dev, "targetting %lukHz %luuV\n", freq, volt);
+
+ mutex_lock(&data->lock);
+
+ if (data->disabled)
+ goto out;
+
+ if (freq > exynos5_int_opp_table[0].clk)
+ pm_qos_update_request(&data->int_req, freq * 16 / 1000);
+ else
+ pm_qos_update_request(&data->int_req, -1);
+
+ if (old_freq < freq)
+ err = exynos5_int_setvolt(data, volt);
+ if (err)
+ goto out;
+
+ err = clk_set_rate(data->int_clk, freq * 1000);
+
+ if (err)
+ goto out;
+
+ if (old_freq > freq)
+ err = exynos5_int_setvolt(data, volt);
+ if (err)
+ goto out;
+
+ data->curr_freq = freq;
+out:
+ mutex_unlock(&data->lock);
+ return err;
+}
+
+static int exynos5_get_busier_dmc(struct busfreq_data_int *data)
+{
+ int i, j;
+ int busy = 0;
+ unsigned int temp = 0;
+
+ for (i = PPMU_RIGHT; i < PPMU_END; i++) {
+ for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
+ if (data->ppmu[i].count[j] > temp) {
+ temp = data->ppmu[i].count[j];
+ busy = i;
+ }
+ }
+ }
+
+ return busy;
+}
+
+static int exynos5_int_get_dev_status(struct device *dev,
+ struct devfreq_dev_status *stat)
+{
+ struct platform_device *pdev = container_of(dev, struct platform_device,
+ dev);
+ struct busfreq_data_int *data = platform_get_drvdata(pdev);
+ int busier_dmc;
+
+ exynos5_read_ppmu(data);
+ busier_dmc = exynos5_get_busier_dmc(data);
+
+ stat->current_frequency = data->curr_freq;
+
+ /* Number of cycles spent on memory access */
+ stat->busy_time = data->ppmu[busier_dmc].count[PPMU_PMNCNT3];
+ stat->busy_time *= 100 / INT_BUS_SATURATION_RATIO;
+ stat->total_time = data->ppmu[busier_dmc].ccnt;
+
+ return 0;
+}
+static void exynos5_int_exit(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev, struct platform_device,
+ dev);
+ struct busfreq_data_int *data = platform_get_drvdata(pdev);
+
+ devfreq_unregister_opp_notifier(dev, data->devfreq);
+}
+
+static struct devfreq_dev_profile exynos5_devfreq_int_profile = {
+ .initial_freq = 160000,
+ .polling_ms = 100,
+ .target = exynos5_busfreq_int_target,
+ .get_dev_status = exynos5_int_get_dev_status,
+ .exit = exynos5_int_exit,
+};
+
+static int exynos5250_init_int_tables(struct busfreq_data_int *data)
+{
+ int i, err = 0;
+
+ for (i = LV_0; i < _LV_END; i++) {
+ err = opp_add(data->dev, exynos5_int_opp_table[i].clk,
+ exynos5_int_opp_table[i].volt);
+ if (err) {
+ dev_err(data->dev, "Cannot add opp entries.\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ struct busfreq_data_int *data = container_of(this,
+ struct busfreq_data_int, pm_notifier);
+ struct opp *opp;
+ unsigned long maxfreq = ULONG_MAX;
+ unsigned long freq;
+ unsigned long volt;
+ int err = 0;
+
+ switch (event) {
+ case PM_SUSPEND_PREPARE:
+ /* Set Fastest and Deactivate DVFS */
+ mutex_lock(&data->lock);
+
+ data->disabled = true;
+
+ rcu_read_lock();
+ opp = opp_find_freq_floor(data->dev, &maxfreq);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ err = PTR_ERR(opp);
+ goto unlock;
+ }
+ freq = opp_get_freq(opp);
+ volt = opp_get_voltage(opp);
+ rcu_read_unlock();
+
+ err = exynos5_int_setvolt(data, volt);
+ if (err)
+ goto unlock;
+
+ err = clk_set_rate(data->int_clk, freq * 1000);
+
+ if (err)
+ goto unlock;
+
+ data->curr_freq = freq;
+unlock:
+ mutex_unlock(&data->lock);
+ if (err)
+ return NOTIFY_BAD;
+ return NOTIFY_OK;
+ case PM_POST_RESTORE:
+ case PM_POST_SUSPEND:
+ /* Reactivate */
+ mutex_lock(&data->lock);
+ data->disabled = false;
+ mutex_unlock(&data->lock);
+ return NOTIFY_OK;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int exynos5_busfreq_int_probe(struct platform_device *pdev)
+{
+ struct busfreq_data_int *data;
+ struct opp *opp;
+ struct device *dev = &pdev->dev;
+ struct device_node *np;
+ unsigned long initial_freq;
+ unsigned long initial_volt;
+ int err = 0;
+ int i;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int),
+ GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(dev, "Cannot allocate memory.\n");
+ return -ENOMEM;
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-ppmu");
+ if (np == NULL) {
+ pr_err("Unable to find PPMU node\n");
+ return -ENOENT;
+ }
+
+ for (i = PPMU_RIGHT; i < PPMU_END; i++) {
+ /* map PPMU memory region */
+ data->ppmu[i].hw_base = of_iomap(np, i);
+ if (data->ppmu[i].hw_base == NULL) {
+ dev_err(&pdev->dev, "failed to map memory region\n");
+ return -ENOMEM;
+ }
+ }
+ data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event;
+ data->dev = dev;
+ mutex_init(&data->lock);
+
+ err = exynos5250_init_int_tables(data);
+ if (err)
+ goto err_regulator;
+
+ data->vdd_int = regulator_get(dev, "vdd_int");
+ if (IS_ERR(data->vdd_int)) {
+ dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
+ err = PTR_ERR(data->vdd_int);
+ goto err_regulator;
+ }
+
+ data->int_clk = clk_get(dev, "int_clk");
+ if (IS_ERR(data->int_clk)) {
+ dev_err(dev, "Cannot get clock \"int_clk\"\n");
+ err = PTR_ERR(data->int_clk);
+ goto err_clock;
+ }
+
+ rcu_read_lock();
+ opp = opp_find_freq_floor(dev,
+ &exynos5_devfreq_int_profile.initial_freq);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ dev_err(dev, "Invalid initial frequency %lu kHz.\n",
+ exynos5_devfreq_int_profile.initial_freq);
+ err = PTR_ERR(opp);
+ goto err_opp_add;
+ }
+ initial_freq = opp_get_freq(opp);
+ initial_volt = opp_get_voltage(opp);
+ rcu_read_unlock();
+ data->curr_freq = initial_freq;
+
+ err = clk_set_rate(data->int_clk, initial_freq * 1000);
+ if (err) {
+ dev_err(dev, "Failed to set initial frequency\n");
+ goto err_opp_add;
+ }
+
+ err = exynos5_int_setvolt(data, initial_volt);
+ if (err)
+ goto err_opp_add;
+
+ platform_set_drvdata(pdev, data);
+
+ busfreq_mon_reset(data);
+
+ data->devfreq = devfreq_add_device(dev, &exynos5_devfreq_int_profile,
+ "simple_ondemand", NULL);
+
+ if (IS_ERR(data->devfreq)) {
+ err = PTR_ERR(data->devfreq);
+ goto err_devfreq_add;
+ }
+
+ devfreq_register_opp_notifier(dev, data->devfreq);
+
+ err = register_pm_notifier(&data->pm_notifier);
+ if (err) {
+ dev_err(dev, "Failed to setup pm notifier\n");
+ goto err_devfreq_add;
+ }
+
+ /* TODO: Add a new QOS class for int/mif bus */
+ pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1);
+
+ return 0;
+
+err_devfreq_add:
+ devfreq_remove_device(data->devfreq);
+ platform_set_drvdata(pdev, NULL);
+err_opp_add:
+ clk_put(data->int_clk);
+err_clock:
+ regulator_put(data->vdd_int);
+err_regulator:
+ return err;
+}
+
+static int exynos5_busfreq_int_remove(struct platform_device *pdev)
+{
+ struct busfreq_data_int *data = platform_get_drvdata(pdev);
+
+ pm_qos_remove_request(&data->int_req);
+ unregister_pm_notifier(&data->pm_notifier);
+ devfreq_remove_device(data->devfreq);
+ regulator_put(data->vdd_int);
+ clk_put(data->int_clk);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static int exynos5_busfreq_int_resume(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev, struct platform_device,
+ dev);
+ struct busfreq_data_int *data = platform_get_drvdata(pdev);
+
+ busfreq_mon_reset(data);
+ return 0;
+}
+
+static const struct dev_pm_ops exynos5_busfreq_int_pm = {
+ .resume = exynos5_busfreq_int_resume,
+};
+
+/* platform device pointer for exynos5 devfreq device. */
+static struct platform_device *exynos5_devfreq_pdev;
+
+static struct platform_driver exynos5_busfreq_int_driver = {
+ .probe = exynos5_busfreq_int_probe,
+ .remove = exynos5_busfreq_int_remove,
+ .driver = {
+ .name = "exynos5-bus-int",
+ .owner = THIS_MODULE,
+ .pm = &exynos5_busfreq_int_pm,
+ },
+};
+
+static int __init exynos5_busfreq_int_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&exynos5_busfreq_int_driver);
+ if (ret < 0)
+ goto out;
+
+ exynos5_devfreq_pdev =
+ platform_device_register_simple("exynos5-bus-int", -1, NULL, 0);
+ if (IS_ERR_OR_NULL(exynos5_devfreq_pdev)) {
+ ret = PTR_ERR(exynos5_devfreq_pdev);
+ goto out1;
+ }
+
+ return 0;
+out1:
+ platform_driver_unregister(&exynos5_busfreq_int_driver);
+out:
+ return ret;
+}
+late_initcall(exynos5_busfreq_int_init);
+
+static void __exit exynos5_busfreq_int_exit(void)
+{
+ platform_device_unregister(exynos5_devfreq_pdev);
+ platform_driver_unregister(&exynos5_busfreq_int_driver);
+}
+module_exit(exynos5_busfreq_int_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework");
diff --git a/drivers/devfreq/exynos/exynos_ppmu.c b/drivers/devfreq/exynos/exynos_ppmu.c
new file mode 100644
index 000000000000..85fc5ac1036a
--- /dev/null
+++ b/drivers/devfreq/exynos/exynos_ppmu.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS - PPMU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include "exynos_ppmu.h"
+
+void exynos_ppmu_reset(void __iomem *ppmu_base)
+{
+ __raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base);
+ __raw_writel(PPMU_ENABLE_CYCLE |
+ PPMU_ENABLE_COUNT0 |
+ PPMU_ENABLE_COUNT1 |
+ PPMU_ENABLE_COUNT2 |
+ PPMU_ENABLE_COUNT3,
+ ppmu_base + PPMU_CNTENS);
+}
+
+void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
+ unsigned int evt)
+{
+ __raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch));
+}
+
+void exynos_ppmu_start(void __iomem *ppmu_base)
+{
+ __raw_writel(PPMU_ENABLE, ppmu_base);
+}
+
+void exynos_ppmu_stop(void __iomem *ppmu_base)
+{
+ __raw_writel(PPMU_DISABLE, ppmu_base);
+}
+
+unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch)
+{
+ unsigned int total;
+
+ if (ch == PPMU_PMNCNT3)
+ total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) |
+ __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1)));
+ else
+ total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch));
+
+ return total;
+}
diff --git a/drivers/devfreq/exynos/exynos_ppmu.h b/drivers/devfreq/exynos/exynos_ppmu.h
new file mode 100644
index 000000000000..7dfb221eaccd
--- /dev/null
+++ b/drivers/devfreq/exynos/exynos_ppmu.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS PPMU header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __DEVFREQ_EXYNOS_PPMU_H
+#define __DEVFREQ_EXYNOS_PPMU_H __FILE__
+
+#include <linux/ktime.h>
+
+/* For PPMU Control */
+#define PPMU_ENABLE BIT(0)
+#define PPMU_DISABLE 0x0
+#define PPMU_CYCLE_RESET BIT(1)
+#define PPMU_COUNTER_RESET BIT(2)
+
+#define PPMU_ENABLE_COUNT0 BIT(0)
+#define PPMU_ENABLE_COUNT1 BIT(1)
+#define PPMU_ENABLE_COUNT2 BIT(2)
+#define PPMU_ENABLE_COUNT3 BIT(3)
+#define PPMU_ENABLE_CYCLE BIT(31)
+
+#define PPMU_CNTENS 0x10
+#define PPMU_FLAG 0x50
+#define PPMU_CCNT_OVERFLOW BIT(31)
+#define PPMU_CCNT 0x100
+
+#define PPMU_PMCNT0 0x110
+#define PPMU_PMCNT_OFFSET 0x10
+#define PMCNT_OFFSET(x) (PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x))
+
+#define PPMU_BEVT0SEL 0x1000
+#define PPMU_BEVTSEL_OFFSET 0x100
+#define PPMU_BEVTSEL(x) (PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET))
+
+/* For Event Selection */
+#define RD_DATA_COUNT 0x5
+#define WR_DATA_COUNT 0x6
+#define RDWR_DATA_COUNT 0x7
+
+enum ppmu_counter {
+ PPMU_PMNCNT0,
+ PPMU_PMCCNT1,
+ PPMU_PMNCNT2,
+ PPMU_PMNCNT3,
+ PPMU_PMNCNT_MAX,
+};
+
+struct bus_opp_table {
+ unsigned int idx;
+ unsigned long clk;
+ unsigned long volt;
+};
+
+struct exynos_ppmu {
+ void __iomem *hw_base;
+ unsigned int ccnt;
+ unsigned int event[PPMU_PMNCNT_MAX];
+ unsigned int count[PPMU_PMNCNT_MAX];
+ unsigned long long ns;
+ ktime_t reset_time;
+ bool ccnt_overflow;
+ bool count_overflow[PPMU_PMNCNT_MAX];
+};
+
+void exynos_ppmu_reset(void __iomem *ppmu_base);
+void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
+ unsigned int evt);
+void exynos_ppmu_start(void __iomem *ppmu_base);
+void exynos_ppmu_stop(void __iomem *ppmu_base);
+unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch);
+#endif /* __DEVFREQ_EXYNOS_PPMU_H */