diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c')
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 147 |
1 files changed, 146 insertions, 1 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c index 89d7d3fd3321..0541e87e4f38 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c +++ b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c @@ -30,6 +30,7 @@ #include "dc_hw_types.h" #include "core_types.h" #include "../basics/conversion.h" +#include "cursor_reg_cache.h" #define CTX dc_dmub_srv->ctx #define DC_LOGGER CTX->logger @@ -780,7 +781,7 @@ void dc_dmub_setup_subvp_dmub_command(struct dc *dc, // Store the original watermark value for this SubVP config so we can lower it when the // MCLK switch starts wm_val_refclk = context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.pstate_change_ns * - dc->res_pool->ref_clocks.dchub_ref_clock_inKhz / 1000 / 1000; + (dc->res_pool->ref_clocks.dchub_ref_clock_inKhz / 1000) / 1000; cmd.fw_assisted_mclk_switch_v2.config_data.watermark_a_cache = wm_val_refclk < 0xFFFF ? wm_val_refclk : 0xFFFF; } @@ -880,3 +881,147 @@ void dc_dmub_srv_log_diagnostic_data(struct dc_dmub_srv *dc_dmub_srv) diag_data.is_cw0_enabled, diag_data.is_cw6_enabled); } + +static bool dc_dmub_should_update_cursor_data(struct pipe_ctx *pipe_ctx) +{ + if (pipe_ctx->plane_state != NULL) { + if (pipe_ctx->plane_state->address.type == PLN_ADDR_TYPE_VIDEO_PROGRESSIVE) + return false; + } + + if ((pipe_ctx->stream->link->psr_settings.psr_version == DC_PSR_VERSION_SU_1 || + pipe_ctx->stream->link->psr_settings.psr_version == DC_PSR_VERSION_1) && + pipe_ctx->stream->ctx->dce_version >= DCN_VERSION_3_1) + return true; + + return false; +} + +static void dc_build_cursor_update_payload0( + struct pipe_ctx *pipe_ctx, uint8_t p_idx, + struct dmub_cmd_update_cursor_payload0 *payload) +{ + struct hubp *hubp = pipe_ctx->plane_res.hubp; + unsigned int panel_inst = 0; + + if (!dc_get_edp_link_panel_inst(hubp->ctx->dc, + pipe_ctx->stream->link, &panel_inst)) + return; + + /* Payload: Cursor Rect is built from position & attribute + * x & y are obtained from postion + */ + payload->cursor_rect.x = hubp->cur_rect.x; + payload->cursor_rect.y = hubp->cur_rect.y; + /* w & h are obtained from attribute */ + payload->cursor_rect.width = hubp->cur_rect.w; + payload->cursor_rect.height = hubp->cur_rect.h; + + payload->enable = hubp->pos.cur_ctl.bits.cur_enable; + payload->pipe_idx = p_idx; + payload->cmd_version = DMUB_CMD_PSR_CONTROL_VERSION_1; + payload->panel_inst = panel_inst; +} + +static void dc_send_cmd_to_dmu(struct dc_dmub_srv *dmub_srv, + union dmub_rb_cmd *cmd) +{ + dc_dmub_srv_cmd_queue(dmub_srv, cmd); + dc_dmub_srv_cmd_execute(dmub_srv); + dc_dmub_srv_wait_idle(dmub_srv); +} + +static void dc_build_cursor_position_update_payload0( + struct dmub_cmd_update_cursor_payload0 *pl, const uint8_t p_idx, + const struct hubp *hubp, const struct dpp *dpp) +{ + /* Hubp */ + pl->position_cfg.pHubp.cur_ctl.raw = hubp->pos.cur_ctl.raw; + pl->position_cfg.pHubp.position.raw = hubp->pos.position.raw; + pl->position_cfg.pHubp.hot_spot.raw = hubp->pos.hot_spot.raw; + pl->position_cfg.pHubp.dst_offset.raw = hubp->pos.dst_offset.raw; + + /* dpp */ + pl->position_cfg.pDpp.cur0_ctl.raw = dpp->pos.cur0_ctl.raw; + pl->position_cfg.pipe_idx = p_idx; +} + +static void dc_build_cursor_attribute_update_payload1( + struct dmub_cursor_attributes_cfg *pl_A, const uint8_t p_idx, + const struct hubp *hubp, const struct dpp *dpp) +{ + /* Hubp */ + pl_A->aHubp.SURFACE_ADDR_HIGH = hubp->att.SURFACE_ADDR_HIGH; + pl_A->aHubp.SURFACE_ADDR = hubp->att.SURFACE_ADDR; + pl_A->aHubp.cur_ctl.raw = hubp->att.cur_ctl.raw; + pl_A->aHubp.size.raw = hubp->att.size.raw; + pl_A->aHubp.settings.raw = hubp->att.settings.raw; + + /* dpp */ + pl_A->aDpp.cur0_ctl.raw = dpp->att.cur0_ctl.raw; +} + +/** + * *************************************************************************************** + * dc_send_update_cursor_info_to_dmu: Populate the DMCUB Cursor update info command + * + * This function would store the cursor related information and pass it into dmub + * + * @param [in] pCtx: pipe context + * @param [in] pipe_idx: pipe index + * + * @return: void + * + * *************************************************************************************** + */ + +void dc_send_update_cursor_info_to_dmu( + struct pipe_ctx *pCtx, uint8_t pipe_idx) +{ + union dmub_rb_cmd cmd = { 0 }; + union dmub_cmd_update_cursor_info_data *update_cursor_info = + &cmd.update_cursor_info.update_cursor_info_data; + + if (!dc_dmub_should_update_cursor_data(pCtx)) + return; + /* + * Since we use multi_cmd_pending for dmub command, the 2nd command is + * only assigned to store cursor attributes info. + * 1st command can view as 2 parts, 1st is for PSR/Replay data, the other + * is to store cursor position info. + * + * Command heaer type must be the same type if using multi_cmd_pending. + * Besides, while process 2nd command in DMU, the sub type is useless. + * So it's meanless to pass the sub type header with different type. + */ + + { + /* Build Payload#0 Header */ + cmd.update_cursor_info.header.type = DMUB_CMD__UPDATE_CURSOR_INFO; + cmd.update_cursor_info.header.payload_bytes = + sizeof(cmd.update_cursor_info.update_cursor_info_data); + cmd.update_cursor_info.header.multi_cmd_pending = 1; /* To combine multi dmu cmd, 1st cmd */ + + /* Prepare Payload */ + dc_build_cursor_update_payload0(pCtx, pipe_idx, &update_cursor_info->payload0); + + dc_build_cursor_position_update_payload0(&update_cursor_info->payload0, pipe_idx, + pCtx->plane_res.hubp, pCtx->plane_res.dpp); + /* Send update_curosr_info to queue */ + dc_dmub_srv_cmd_queue(pCtx->stream->ctx->dmub_srv, &cmd); + } + { + /* Build Payload#1 Header */ + memset(update_cursor_info, 0, sizeof(union dmub_cmd_update_cursor_info_data)); + cmd.update_cursor_info.header.type = DMUB_CMD__UPDATE_CURSOR_INFO; + cmd.update_cursor_info.header.payload_bytes = sizeof(struct cursor_attributes_cfg); + cmd.update_cursor_info.header.multi_cmd_pending = 0; /* Indicate it's the last command. */ + + dc_build_cursor_attribute_update_payload1( + &cmd.update_cursor_info.update_cursor_info_data.payload1.attribute_cfg, + pipe_idx, pCtx->plane_res.hubp, pCtx->plane_res.dpp); + + /* Combine 2nd cmds update_curosr_info to DMU */ + dc_send_cmd_to_dmu(pCtx->stream->ctx->dmub_srv, &cmd); + } +} |