diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 21 |
1 files changed, 19 insertions, 2 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 38a67051d470..fe346e96c2d1 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1577,8 +1577,25 @@ static enum dc_status apply_single_controller_ctx_to_hw( if (dc_is_dp_signal(pipe_ctx->stream->signal)) dp_source_sequence_trace(link, DPCD_SOURCE_SEQ_AFTER_CONNECT_DIG_FE_OTG); - if (!stream->dpms_off) - core_link_enable_stream(context, pipe_ctx); + /* Have to setup DSC before DIG FE and BE are connected (which happens before the + * link training). This is to make sure the bandwidth sent to DIG BE won't be + * bigger than what the link and/or DIG BE can handle. VBID[6]/CompressedStream_flag + * will be automatically set at a later time when the video is enabled + * (DP_VID_STREAM_EN = 1). + */ + if (pipe_ctx->stream->timing.flags.DSC) { + if (dc_is_dp_signal(pipe_ctx->stream->signal) || + dc_is_virtual_signal(pipe_ctx->stream->signal)) + dp_set_dsc_enable(pipe_ctx, true); + + } + + if (!stream->dpms_off) { + if (dc->hwss.update_phy_state) + dc->hwss.update_phy_state(context, pipe_ctx, TX_ON_SYMCLK_ON); + else + core_link_enable_stream(context, pipe_ctx); + } /* DCN3.1 FPGA Workaround * Need to enable HPO DP Stream Encoder before setting OTG master enable. |