diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c')
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 269 |
1 files changed, 147 insertions, 122 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index a0a65e099104..f6fe0a64beac 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -180,6 +180,9 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_2_soc = { .urgent_latency_adjustment_fabric_clock_reference_mhz = 3000, }; +static bool dcn32_apply_merge_split_flags_helper(struct dc *dc, struct dc_state *context, + bool *repopulate_pipes, int *split, bool *merge); + void dcn32_build_wm_range_table_fpu(struct clk_mgr_internal *clk_mgr) { /* defaults */ @@ -622,7 +625,7 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc, * to combine this with SubVP can cause issues with the scheduling). * - Not TMZ surface */ - if (pipe->plane_state && !pipe->top_pipe && !dcn32_is_center_timing(pipe) && + if (pipe->plane_state && !pipe->top_pipe && !pipe->prev_odm_pipe && !dcn32_is_center_timing(pipe) && !(pipe->stream->timing.pix_clk_100hz / 10000 > DCN3_2_MAX_SUBVP_PIXEL_RATE_MHZ) && (!dcn32_is_psr_capable(pipe) || (context->stream_count == 1 && dc->caps.dmub_caps.subvp_psr)) && dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_NONE && @@ -720,7 +723,7 @@ static bool dcn32_enough_pipes_for_subvp(struct dc *dc, struct dc_state *context */ static bool subvp_subvp_schedulable(struct dc *dc, struct dc_state *context) { - struct pipe_ctx *subvp_pipes[2]; + struct pipe_ctx *subvp_pipes[2] = {0}; struct dc_stream_state *phantom = NULL; uint32_t microschedule_lines = 0; uint32_t index = 0; @@ -1425,13 +1428,14 @@ static bool is_test_pattern_enabled( return false; } -static void dcn32_full_validate_bw_helper(struct dc *dc, +static bool dcn32_full_validate_bw_helper(struct dc *dc, struct dc_state *context, display_e2e_pipe_params_st *pipes, int *vlevel, int *split, bool *merge, - int *pipe_cnt) + int *pipe_cnt, + bool *repopulate_pipes) { struct vba_vars_st *vba = &context->bw_ctx.dml.vba; unsigned int dc_pipe_idx = 0; @@ -1461,6 +1465,12 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, vba->VoltageLevel = *vlevel; } + /* Apply split and merge flags before checking for subvp */ + if (!dcn32_apply_merge_split_flags_helper(dc, context, repopulate_pipes, split, merge)) + return false; + memset(split, 0, MAX_PIPES * sizeof(int)); + memset(merge, 0, MAX_PIPES * sizeof(bool)); + /* Conditions for setting up phantom pipes for SubVP: * 1. Not force disable SubVP * 2. Full update (i.e. !fast_validate) @@ -1475,19 +1485,7 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported || dc->debug.force_subvp_mclk_switch)) { - dcn32_merge_pipes_for_subvp(dc, context); - memset(merge, 0, MAX_PIPES * sizeof(bool)); - vlevel_temp = *vlevel; - /* to re-initialize viewport after the pipe merge */ - for (i = 0; i < dc->res_pool->pipe_count; i++) { - struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; - - if (!pipe_ctx->plane_state || !pipe_ctx->stream) - continue; - - resource_build_scaling_params(pipe_ctx); - } while (!found_supported_config && dcn32_enough_pipes_for_subvp(dc, context) && dcn32_assign_subvp_pipe(dc, context, &dc_pipe_idx)) { @@ -1576,8 +1574,6 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, * add phantom pipes. If pipe split (ODM / MPC) is required, both the main * and phantom pipes will be split in the regular pipe splitting sequence. */ - memset(split, 0, MAX_PIPES * sizeof(int)); - memset(merge, 0, MAX_PIPES * sizeof(bool)); *vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge); vba->VoltageLevel = *vlevel; // Note: We can't apply the phantom pipes to hardware at this time. We have to wait @@ -1590,6 +1586,7 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, try_odm_power_optimization_and_revalidate( dc, context, pipes, split, merge, vlevel, *pipe_cnt); + return true; } static bool is_dtbclk_required(struct dc *dc, struct dc_state *context) @@ -1929,106 +1926,23 @@ static bool dcn32_split_stream_for_mpc_or_odm( return true; } -bool dcn32_internal_validate_bw(struct dc *dc, - struct dc_state *context, - display_e2e_pipe_params_st *pipes, - int *pipe_cnt_out, - int *vlevel_out, - bool fast_validate) +static bool dcn32_apply_merge_split_flags_helper( + struct dc *dc, + struct dc_state *context, + bool *repopulate_pipes, + int *split, + bool *merge) { - bool out = false; - bool repopulate_pipes = false; - int split[MAX_PIPES] = { 0 }; - bool merge[MAX_PIPES] = { false }; + int i, pipe_idx; bool newly_split[MAX_PIPES] = { false }; - int pipe_cnt, i, pipe_idx; - int vlevel = context->bw_ctx.dml.soc.num_states; struct vba_vars_st *vba = &context->bw_ctx.dml.vba; - dc_assert_fp_enabled(); - - ASSERT(pipes); - if (!pipes) - return false; - - // For each full update, remove all existing phantom pipes first - dc_state_remove_phantom_streams_and_planes(dc, context); - dc_state_release_phantom_streams_and_planes(dc, context); - - dc->res_pool->funcs->update_soc_for_wm_a(dc, context); - - pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, fast_validate); - - if (!pipe_cnt) { - out = true; - goto validate_out; - } - - dml_log_pipe_params(&context->bw_ctx.dml, pipes, pipe_cnt); - context->bw_ctx.dml.soc.max_vratio_pre = dcn32_determine_max_vratio_prefetch(dc, context); - - if (!fast_validate) - dcn32_full_validate_bw_helper(dc, context, pipes, &vlevel, split, merge, &pipe_cnt); - - if (fast_validate || - (dc->debug.dml_disallow_alternate_prefetch_modes && - (vlevel == context->bw_ctx.dml.soc.num_states || - vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported))) { - /* - * If dml_disallow_alternate_prefetch_modes is false, then we have already - * tried alternate prefetch modes during full validation. - * - * If mode is unsupported or there is no p-state support, then - * fall back to favouring voltage. - * - * If Prefetch mode 0 failed for this config, or passed with Max UCLK, then try - * to support with Prefetch mode 1 (dm_prefetch_support_fclk_and_stutter == 2) - */ - context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final = - dm_prefetch_support_none; - - context->bw_ctx.dml.validate_max_state = fast_validate; - vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, pipe_cnt); - - context->bw_ctx.dml.validate_max_state = false; - - if (vlevel < context->bw_ctx.dml.soc.num_states) { - memset(split, 0, sizeof(split)); - memset(merge, 0, sizeof(merge)); - vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, vlevel, split, merge); - // dcn20_validate_apply_pipe_split_flags can modify voltage level outside of DML - vba->VoltageLevel = vlevel; - } - } - - dml_log_mode_support_params(&context->bw_ctx.dml); - - if (vlevel == context->bw_ctx.dml.soc.num_states) - goto validate_fail; - - for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) { - struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; - struct pipe_ctx *mpo_pipe = pipe->bottom_pipe; - - if (!pipe->stream) - continue; - - if (vba->ODMCombineEnabled[vba->pipe_plane[pipe_idx]] != dm_odm_combine_mode_disabled - && !dc->config.enable_windowed_mpo_odm - && pipe->plane_state && mpo_pipe - && memcmp(&mpo_pipe->plane_state->clip_rect, - &pipe->stream->src, - sizeof(struct rect)) != 0) { - ASSERT(mpo_pipe->plane_state != pipe->plane_state); - goto validate_fail; - } - pipe_idx++; - } - if (dc->config.enable_windowed_mpo_odm) { - repopulate_pipes = update_pipes_with_split_flags( - dc, context, vba, split, merge); + if (update_pipes_with_split_flags( + dc, context, vba, split, merge)) + *repopulate_pipes = true; } else { + /* the code below will be removed once windowed mpo odm is fully * enabled. */ @@ -2085,7 +1999,7 @@ bool dcn32_internal_validate_bw(struct dc *dc, memset(&pipe->plane_res, 0, sizeof(pipe->plane_res)); memset(&pipe->stream_res, 0, sizeof(pipe->stream_res)); memset(&pipe->link_res, 0, sizeof(pipe->link_res)); - repopulate_pipes = true; + *repopulate_pipes = true; } else if (pipe->top_pipe && pipe->top_pipe->plane_state == pipe->plane_state) { struct pipe_ctx *top_pipe = pipe->top_pipe; struct pipe_ctx *bottom_pipe = pipe->bottom_pipe; @@ -2101,7 +2015,7 @@ bool dcn32_internal_validate_bw(struct dc *dc, memset(&pipe->plane_res, 0, sizeof(pipe->plane_res)); memset(&pipe->stream_res, 0, sizeof(pipe->stream_res)); memset(&pipe->link_res, 0, sizeof(pipe->link_res)); - repopulate_pipes = true; + *repopulate_pipes = true; } else ASSERT(0); /* Should never try to merge master pipe */ @@ -2140,15 +2054,15 @@ bool dcn32_internal_validate_bw(struct dc *dc, hsplit_pipe = dcn32_find_split_pipe(dc, context, old_index); ASSERT(hsplit_pipe); if (!hsplit_pipe) - goto validate_fail; + return false; if (!dcn32_split_stream_for_mpc_or_odm( dc, &context->res_ctx, pipe, hsplit_pipe, odm)) - goto validate_fail; + return false; newly_split[hsplit_pipe->pipe_idx] = true; - repopulate_pipes = true; + *repopulate_pipes = true; } if (split[i] == 4) { struct pipe_ctx *pipe_4to1; @@ -2163,11 +2077,11 @@ bool dcn32_internal_validate_bw(struct dc *dc, pipe_4to1 = dcn32_find_split_pipe(dc, context, old_index); ASSERT(pipe_4to1); if (!pipe_4to1) - goto validate_fail; + return false; if (!dcn32_split_stream_for_mpc_or_odm( dc, &context->res_ctx, pipe, pipe_4to1, odm)) - goto validate_fail; + return false; newly_split[pipe_4to1->pipe_idx] = true; if (odm && old_pipe->next_odm_pipe && old_pipe->next_odm_pipe->next_odm_pipe @@ -2182,11 +2096,11 @@ bool dcn32_internal_validate_bw(struct dc *dc, pipe_4to1 = dcn32_find_split_pipe(dc, context, old_index); ASSERT(pipe_4to1); if (!pipe_4to1) - goto validate_fail; + return false; if (!dcn32_split_stream_for_mpc_or_odm( dc, &context->res_ctx, hsplit_pipe, pipe_4to1, odm)) - goto validate_fail; + return false; newly_split[pipe_4to1->pipe_idx] = true; } if (odm) @@ -2198,11 +2112,122 @@ bool dcn32_internal_validate_bw(struct dc *dc, if (pipe->plane_state) { if (!resource_build_scaling_params(pipe)) - goto validate_fail; + return false; } } + + for (i = 0; i < context->stream_count; i++) { + struct pipe_ctx *otg_master = resource_get_otg_master_for_stream(&context->res_ctx, + context->streams[i]); + + if (otg_master) + resource_build_test_pattern_params(&context->res_ctx, otg_master); + } + } + return true; +} + +bool dcn32_internal_validate_bw(struct dc *dc, + struct dc_state *context, + display_e2e_pipe_params_st *pipes, + int *pipe_cnt_out, + int *vlevel_out, + bool fast_validate) +{ + bool out = false; + bool repopulate_pipes = false; + int split[MAX_PIPES] = { 0 }; + bool merge[MAX_PIPES] = { false }; + int pipe_cnt, i, pipe_idx; + int vlevel = context->bw_ctx.dml.soc.num_states; + struct vba_vars_st *vba = &context->bw_ctx.dml.vba; + + dc_assert_fp_enabled(); + + ASSERT(pipes); + if (!pipes) + return false; + + /* For each full update, remove all existing phantom pipes first */ + dc_state_remove_phantom_streams_and_planes(dc, context); + dc_state_release_phantom_streams_and_planes(dc, context); + + dc->res_pool->funcs->update_soc_for_wm_a(dc, context); + + pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, fast_validate); + + if (!pipe_cnt) { + out = true; + goto validate_out; + } + + dml_log_pipe_params(&context->bw_ctx.dml, pipes, pipe_cnt); + context->bw_ctx.dml.soc.max_vratio_pre = dcn32_determine_max_vratio_prefetch(dc, context); + + if (!fast_validate) { + if (!dcn32_full_validate_bw_helper(dc, context, pipes, &vlevel, split, merge, + &pipe_cnt, &repopulate_pipes)) + goto validate_fail; + } + + if (fast_validate || + (dc->debug.dml_disallow_alternate_prefetch_modes && + (vlevel == context->bw_ctx.dml.soc.num_states || + vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported))) { + /* + * If dml_disallow_alternate_prefetch_modes is false, then we have already + * tried alternate prefetch modes during full validation. + * + * If mode is unsupported or there is no p-state support, then + * fall back to favouring voltage. + * + * If Prefetch mode 0 failed for this config, or passed with Max UCLK, then try + * to support with Prefetch mode 1 (dm_prefetch_support_fclk_and_stutter == 2) + */ + context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final = + dm_prefetch_support_none; + + context->bw_ctx.dml.validate_max_state = fast_validate; + vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, pipe_cnt); + + context->bw_ctx.dml.validate_max_state = false; + + if (vlevel < context->bw_ctx.dml.soc.num_states) { + memset(split, 0, sizeof(split)); + memset(merge, 0, sizeof(merge)); + vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, vlevel, split, merge); + /* dcn20_validate_apply_pipe_split_flags can modify voltage level outside of DML */ + vba->VoltageLevel = vlevel; + } } + dml_log_mode_support_params(&context->bw_ctx.dml); + + if (vlevel == context->bw_ctx.dml.soc.num_states) + goto validate_fail; + + for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) { + struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; + struct pipe_ctx *mpo_pipe = pipe->bottom_pipe; + + if (!pipe->stream) + continue; + + if (vba->ODMCombineEnabled[vba->pipe_plane[pipe_idx]] != dm_odm_combine_mode_disabled + && !dc->config.enable_windowed_mpo_odm + && pipe->plane_state && mpo_pipe + && memcmp(&mpo_pipe->plane_state->clip_rect, + &pipe->stream->src, + sizeof(struct rect)) != 0) { + ASSERT(mpo_pipe->plane_state != pipe->plane_state); + goto validate_fail; + } + pipe_idx++; + } + + if (!dcn32_apply_merge_split_flags_helper(dc, context, &repopulate_pipes, split, merge)) + goto validate_fail; + /* Actual dsc count per stream dsc validation*/ if (!dcn20_validate_dsc(dc, context)) { vba->ValidationStatus[vba->soc.num_states] = DML_FAIL_DSC_VALIDATION_FAILURE; |