diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c')
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 52 |
1 files changed, 44 insertions, 8 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index 8118cfc5b405..7f6c977c4981 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -560,6 +560,7 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc, bool valid_assignment_found = false; unsigned int free_pipes = dcn32_get_num_free_pipes(dc, context); bool current_assignment_freesync = false; + struct vba_vars_st *vba = &context->bw_ctx.dml.vba; for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) { struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; @@ -573,8 +574,15 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc, refresh_rate = (pipe->stream->timing.pix_clk_100hz * 100 + pipe->stream->timing.v_total * pipe->stream->timing.h_total - 1) / (double)(pipe->stream->timing.v_total * pipe->stream->timing.h_total); + /* SubVP pipe candidate requirements: + * - Refresh rate < 120hz + * - Not able to switch in vactive naturally (switching in active means the + * DET provides enough buffer to hide the P-State switch latency -- trying + * to combine this with SubVP can cause issues with the scheduling). + */ if (pipe->plane_state && !pipe->top_pipe && - pipe->stream->mall_stream_config.type == SUBVP_NONE && refresh_rate < 120) { + pipe->stream->mall_stream_config.type == SUBVP_NONE && refresh_rate < 120 && + vba->ActiveDRAMClockChangeLatencyMarginPerState[vba->VoltageLevel][vba->maxMpcComb][vba->pipe_plane[pipe_idx]] <= 0) { while (pipe) { num_pipes++; pipe = pipe->bottom_pipe; @@ -998,8 +1006,10 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, *vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt); /* This may adjust vlevel and maxMpcComb */ - if (*vlevel < context->bw_ctx.dml.soc.num_states) + if (*vlevel < context->bw_ctx.dml.soc.num_states) { *vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge); + vba->VoltageLevel = *vlevel; + } /* Conditions for setting up phantom pipes for SubVP: * 1. Not force disable SubVP @@ -1014,6 +1024,15 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, dc->debug.force_subvp_mclk_switch)) { dcn32_merge_pipes_for_subvp(dc, context); + // to re-initialize viewport after the pipe merge + for (i = 0; i < dc->res_pool->pipe_count; i++) { + struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; + + if (!pipe_ctx->plane_state || !pipe_ctx->stream) + continue; + + resource_build_scaling_params(pipe_ctx); + } while (!found_supported_config && dcn32_enough_pipes_for_subvp(dc, context) && dcn32_assign_subvp_pipe(dc, context, &dc_pipe_idx)) { @@ -1082,11 +1101,19 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, dc->res_pool->funcs->remove_phantom_pipes(dc, context); vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] = dm_dram_clock_change_unsupported; *pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, false); + + *vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt); + /* This may adjust vlevel and maxMpcComb */ + if (*vlevel < context->bw_ctx.dml.soc.num_states) { + *vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge); + vba->VoltageLevel = *vlevel; + } } else { // only call dcn20_validate_apply_pipe_split_flags if we found a supported config memset(split, 0, MAX_PIPES * sizeof(int)); memset(merge, 0, MAX_PIPES * sizeof(bool)); *vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge); + vba->VoltageLevel = *vlevel; // Most populate phantom DLG params before programming hardware / timing for phantom pipe DC_FP_START(); @@ -1416,6 +1443,8 @@ bool dcn32_internal_validate_bw(struct dc *dc, memset(split, 0, sizeof(split)); memset(merge, 0, sizeof(merge)); vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, vlevel, split, merge); + // dcn20_validate_apply_pipe_split_flags can modify voltage level outside of DML + vba->VoltageLevel = vlevel; } } @@ -1776,7 +1805,11 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context, context->bw_ctx.bw.dcn.watermarks.c.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; context->bw_ctx.bw.dcn.watermarks.c.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; context->bw_ctx.bw.dcn.watermarks.c.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; - context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.fclk_pstate_change_ns = get_fclk_watermark(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; + /* On DCN32/321, PMFW will set PSTATE_CHANGE_TYPE = 1 (FCLK) for UCLK dummy p-state. + * In this case we must program FCLK WM Set C to use the UCLK dummy p-state WM + * value. + */ + context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.fclk_pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; context->bw_ctx.bw.dcn.watermarks.c.usr_retraining_ns = get_usr_retraining_watermark(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; if ((!pstate_en) && (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].valid)) { @@ -2136,13 +2169,16 @@ void dcn32_update_bw_bounding_box_fpu(struct dc *dc, struct clk_bw_params *bw_pa if (dc->ctx->dc_bios->funcs->get_soc_bb_info(dc->ctx->dc_bios, &bb_info) == BP_RESULT_OK) { if (bb_info.dram_clock_change_latency_100ns > 0) - dcn3_2_soc.dram_clock_change_latency_us = bb_info.dram_clock_change_latency_100ns * 10; + dcn3_2_soc.dram_clock_change_latency_us = + bb_info.dram_clock_change_latency_100ns * 10; - if (bb_info.dram_sr_enter_exit_latency_100ns > 0) - dcn3_2_soc.sr_enter_plus_exit_time_us = bb_info.dram_sr_enter_exit_latency_100ns * 10; + if (bb_info.dram_sr_enter_exit_latency_100ns > 0) + dcn3_2_soc.sr_enter_plus_exit_time_us = + bb_info.dram_sr_enter_exit_latency_100ns * 10; - if (bb_info.dram_sr_exit_latency_100ns > 0) - dcn3_2_soc.sr_exit_time_us = bb_info.dram_sr_exit_latency_100ns * 10; + if (bb_info.dram_sr_exit_latency_100ns > 0) + dcn3_2_soc.sr_exit_time_us = + bb_info.dram_sr_exit_latency_100ns * 10; } } |