diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-edp.c')
| -rw-r--r-- | drivers/gpu/drm/panel/panel-edp.c | 83 |
1 files changed, 71 insertions, 12 deletions
diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c index f22677373171..c76f186c4baa 100644 --- a/drivers/gpu/drm/panel/panel-edp.c +++ b/drivers/gpu/drm/panel/panel-edp.c @@ -203,6 +203,9 @@ struct edp_panel_entry { /** @name: Name of this panel (for printing to logs). */ const char *name; + + /** @override_edid_mode: Override the mode obtained by edid. */ + const struct drm_display_mode *override_edid_mode; }; struct panel_edp { @@ -301,6 +304,24 @@ static unsigned int panel_edp_get_display_modes(struct panel_edp *panel, return num; } +static int panel_edp_override_edid_mode(struct panel_edp *panel, + struct drm_connector *connector, + const struct drm_display_mode *override_mode) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, override_mode); + if (!mode) { + dev_err(panel->base.dev, "failed to add additional mode\n"); + return 0; + } + + mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + return 1; +} + static int panel_edp_get_non_edid_modes(struct panel_edp *panel, struct drm_connector *connector) { @@ -568,6 +589,10 @@ static int panel_edp_get_modes(struct drm_panel *panel, { struct panel_edp *p = to_panel_edp(panel); int num = 0; + bool has_hard_coded_modes = p->desc->num_timings || p->desc->num_modes; + bool has_override_edid_mode = p->detected_panel && + p->detected_panel != ERR_PTR(-EINVAL) && + p->detected_panel->override_edid_mode; /* probe EDID if a DDC bus is available */ if (p->ddc) { @@ -575,20 +600,28 @@ static int panel_edp_get_modes(struct drm_panel *panel, if (!p->edid) p->edid = drm_get_edid(connector, p->ddc); - - if (p->edid) - num += drm_add_edid_modes(connector, p->edid); + /* + * If both edid and hard-coded modes exists, skip edid modes to + * avoid multiple preferred modes. + */ + if (p->edid && !has_hard_coded_modes) { + if (has_override_edid_mode) { + /* + * override_edid_mode is specified. Use + * override_edid_mode instead of from edid. + */ + num += panel_edp_override_edid_mode(p, connector, + p->detected_panel->override_edid_mode); + } else { + num += drm_add_edid_modes(connector, p->edid); + } + } pm_runtime_mark_last_busy(panel->dev); pm_runtime_put_autosuspend(panel->dev); } - /* - * Add hard-coded panel modes. Don't call this if there are no timings - * and no modes (the generic edp-panel case) because it will clobber - * the display_info that was already set by drm_add_edid_modes(). - */ - if (p->desc->num_timings || p->desc->num_modes) + if (has_hard_coded_modes) num += panel_edp_get_non_edid_modes(p, connector); else if (!num) dev_warn(p->base.dev, "No display modes\n"); @@ -950,6 +983,19 @@ static const struct panel_desc auo_b101ean01 = { }, }; +static const struct drm_display_mode auo_b116xa3_mode = { + .clock = 70589, + .hdisplay = 1366, + .hsync_start = 1366 + 40, + .hsync_end = 1366 + 40 + 40, + .htotal = 1366 + 40 + 40 + 32, + .vdisplay = 768, + .vsync_start = 768 + 10, + .vsync_end = 768 + 10 + 12, + .vtotal = 768 + 10 + 12 + 6, + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, +}; + static const struct drm_display_mode auo_b116xak01_mode = { .clock = 69300, .hdisplay = 1366, @@ -1849,6 +1895,15 @@ static const struct panel_delay delay_200_150_e200 = { .delay = _delay \ } +#define EDP_PANEL_ENTRY2(vend_chr_0, vend_chr_1, vend_chr_2, product_id, _delay, _name, _mode) \ +{ \ + .name = _name, \ + .panel_id = drm_edid_encode_panel_id(vend_chr_0, vend_chr_1, vend_chr_2, \ + product_id), \ + .delay = _delay, \ + .override_edid_mode = _mode \ +} + /* * This table is used to figure out power sequencing delays for panels that * are detected by EDID. Entries here may point to entries in the @@ -1866,9 +1921,11 @@ static const struct edp_panel_entry edp_panels[] = { EDP_PANEL_ENTRY('A', 'U', 'O', 0x239b, &delay_200_500_e50, "B116XAN06.1"), EDP_PANEL_ENTRY('A', 'U', 'O', 0x255c, &delay_200_500_e50, "B116XTN02.5"), EDP_PANEL_ENTRY('A', 'U', 'O', 0x403d, &delay_200_500_e50, "B140HAN04.0"), - EDP_PANEL_ENTRY('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0"), + EDP_PANEL_ENTRY2('A', 'U', 'O', 0x405c, &auo_b116xak01.delay, "B116XAK01.0", + &auo_b116xa3_mode), EDP_PANEL_ENTRY('A', 'U', 'O', 0x582d, &delay_200_500_e50, "B133UAN01.0"), - EDP_PANEL_ENTRY('A', 'U', 'O', 0x615c, &delay_200_500_e50, "B116XAN06.1"), + EDP_PANEL_ENTRY2('A', 'U', 'O', 0x615c, &delay_200_500_e50, "B116XAN06.1", + &auo_b116xa3_mode), EDP_PANEL_ENTRY('A', 'U', 'O', 0x635c, &delay_200_500_e50, "B116XAN06.3"), EDP_PANEL_ENTRY('A', 'U', 'O', 0x639c, &delay_200_500_e50, "B140HAK02.7"), EDP_PANEL_ENTRY('A', 'U', 'O', 0x8594, &delay_200_500_e50, "B133UAN01.0"), @@ -1910,9 +1967,9 @@ static const struct edp_panel_entry edp_panels[] = { EDP_PANEL_ENTRY('C', 'M', 'N', 0x142b, &delay_200_500_e80_d50, "N140HCA-EAC"), EDP_PANEL_ENTRY('C', 'M', 'N', 0x144f, &delay_200_500_e80_d50, "N140HGA-EA1"), EDP_PANEL_ENTRY('C', 'M', 'N', 0x1468, &delay_200_500_e80, "N140HGA-EA1"), - EDP_PANEL_ENTRY('C', 'M', 'N', 0x14e5, &delay_200_500_e80_d50, "N140HGA-EA1"), EDP_PANEL_ENTRY('C', 'M', 'N', 0x14d4, &delay_200_500_e80_d50, "N140HCA-EAC"), EDP_PANEL_ENTRY('C', 'M', 'N', 0x14d6, &delay_200_500_e80_d50, "N140BGA-EA4"), + EDP_PANEL_ENTRY('C', 'M', 'N', 0x14e5, &delay_200_500_e80_d50, "N140HGA-EA1"), EDP_PANEL_ENTRY('H', 'K', 'C', 0x2d5c, &delay_200_500_e200, "MB116AN01-2"), @@ -1926,6 +1983,8 @@ static const struct edp_panel_entry edp_panels[] = { EDP_PANEL_ENTRY('K', 'D', 'C', 0x0809, &delay_200_500_e50, "KD116N2930A15"), EDP_PANEL_ENTRY('K', 'D', 'B', 0x1120, &delay_200_500_e80_d50, "116N29-30NK-C007"), + EDP_PANEL_ENTRY('S', 'D', 'C', 0x416d, &delay_100_500_e200, "ATNA45AF01"), + EDP_PANEL_ENTRY('S', 'H', 'P', 0x1511, &delay_200_500_e50, "LQ140M1JW48"), EDP_PANEL_ENTRY('S', 'H', 'P', 0x1523, &sharp_lq140m1jw46.delay, "LQ140M1JW46"), EDP_PANEL_ENTRY('S', 'H', 'P', 0x154c, &delay_200_500_p2e100, "LQ116M1JW10"), |