diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-cht-wc.c')
-rw-r--r-- | drivers/i2c/busses/i2c-cht-wc.c | 131 |
1 files changed, 104 insertions, 27 deletions
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c index 1cf68f85b2e1..de15f09c9b47 100644 --- a/drivers/i2c/busses/i2c-cht-wc.c +++ b/drivers/i2c/busses/i2c-cht-wc.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/power/bq24190_charger.h> +#include <linux/power/bq25890_charger.h> #include <linux/slab.h> #define CHT_WC_I2C_CTRL 0x5e24 @@ -99,15 +100,8 @@ static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data) * interrupt handler as well, so running the client irq handler from * this thread will cause things to lock up. */ - if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) { - /* - * generic_handle_irq expects local IRQs to be disabled - * as normally it is called from interrupt context. - */ - local_irq_disable(); - generic_handle_irq(adap->client_irq); - local_irq_enable(); - } + if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) + generic_handle_irq_safe(adap->client_irq); return IRQ_HANDLED; } @@ -270,6 +264,7 @@ static const struct irq_chip cht_wc_i2c_irq_chip = { .name = "cht_wc_ext_chrg_irq_chip", }; +/********** GPD Win / Pocket charger IC settings **********/ static const char * const bq24190_suppliers[] = { "tcpm-source-psy-i2c-fusb302" }; @@ -304,17 +299,92 @@ static struct bq24190_platform_data bq24190_pdata = { .regulator_init_data = &bq24190_vbus_init_data, }; +static struct i2c_board_info gpd_win_board_info = { + .type = "bq24190", + .addr = 0x6b, + .dev_name = "bq24190", + .swnode = &bq24190_node, + .platform_data = &bq24190_pdata, +}; + +/********** Xiaomi Mi Pad 2 charger IC settings **********/ +static struct regulator_consumer_supply bq2589x_vbus_consumer = { + .supply = "vbus", + .dev_name = "cht_wcove_pwrsrc", +}; + +static const struct regulator_init_data bq2589x_vbus_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &bq2589x_vbus_consumer, + .num_consumer_supplies = 1, +}; + +static struct bq25890_platform_data bq2589x_pdata = { + .regulator_init_data = &bq2589x_vbus_init_data, +}; + +static const struct property_entry xiaomi_mipad2_props[] = { + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + PROPERTY_ENTRY_BOOL("linux,read-back-settings"), + { } +}; + +static const struct software_node xiaomi_mipad2_node = { + .properties = xiaomi_mipad2_props, +}; + +static struct i2c_board_info xiaomi_mipad2_board_info = { + .type = "bq25890", + .addr = 0x6a, + .dev_name = "bq25890", + .swnode = &xiaomi_mipad2_node, + .platform_data = &bq2589x_pdata, +}; + +/********** Lenovo Yogabook YB1-X90F/-X91F/-X91L charger settings **********/ +static const char * const lenovo_yb1_bq25892_suppliers[] = { "cht_wcove_pwrsrc" }; + +static const struct property_entry lenovo_yb1_bq25892_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", + lenovo_yb1_bq25892_suppliers), + PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000), + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + /* + * The firmware sets everything to the defaults, which leads to a + * somewhat low charge-current of 2048mA and worse to a battery-voltage + * of 4.2V instead of 4.35V (when booted without a charger connected). + * Use our own values instead of "linux,read-back-settings" to fix this. + */ + PROPERTY_ENTRY_U32("ti,charge-current", 4224000), + PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), + PROPERTY_ENTRY_U32("ti,termination-current", 256000), + PROPERTY_ENTRY_U32("ti,precharge-current", 128000), + PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3500000), + PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), + PROPERTY_ENTRY_U32("ti,boost-max-current", 1400000), + PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), + { } +}; + +static const struct software_node lenovo_yb1_bq25892_node = { + .properties = lenovo_yb1_bq25892_props, +}; + +static struct i2c_board_info lenovo_yogabook1_board_info = { + .type = "bq25892", + .addr = 0x6b, + .dev_name = "bq25892", + .swnode = &lenovo_yb1_bq25892_node, + .platform_data = &bq2589x_pdata, +}; + static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) { struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct i2c_board_info *board_info = NULL; struct cht_wc_i2c_adap *adap; - struct i2c_board_info board_info = { - .type = "bq24190", - .addr = 0x6b, - .dev_name = "bq24190", - .swnode = &bq24190_node, - .platform_data = &bq24190_pdata, - }; int ret, reg, irq; irq = platform_get_irq(pdev, 0); @@ -379,17 +449,24 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) if (ret) goto remove_irq_domain; - /* - * Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger, - * connected to this i2c bus, and a max17047 fuel-gauge and a fusb302 - * USB Type-C controller connected to another i2c bus. In this setup - * the max17047 and fusb302 devices are enumerated through an INT33FE - * ACPI device. If this device is present register an i2c-client for - * the TI bq24292i charger. - */ - if (acpi_dev_present("INT33FE", NULL, -1)) { - board_info.irq = adap->client_irq; - adap->client = i2c_new_client_device(&adap->adapter, &board_info); + switch (pmic->cht_wc_model) { + case INTEL_CHT_WC_GPD_WIN_POCKET: + board_info = &gpd_win_board_info; + break; + case INTEL_CHT_WC_XIAOMI_MIPAD2: + board_info = &xiaomi_mipad2_board_info; + break; + case INTEL_CHT_WC_LENOVO_YOGABOOK1: + board_info = &lenovo_yogabook1_board_info; + break; + default: + dev_warn(&pdev->dev, "Unknown model, not instantiating charger device\n"); + break; + } + + if (board_info) { + board_info->irq = adap->client_irq; + adap->client = i2c_new_client_device(&adap->adapter, board_info); if (IS_ERR(adap->client)) { ret = PTR_ERR(adap->client); goto del_adapter; |