diff options
Diffstat (limited to 'drivers/i2c/muxes')
-rw-r--r-- | drivers/i2c/muxes/i2c-mux-mlxcpld.c | 2 | ||||
-rw-r--r-- | drivers/i2c/muxes/i2c-mux-pca954x.c | 43 |
2 files changed, 43 insertions, 2 deletions
diff --git a/drivers/i2c/muxes/i2c-mux-mlxcpld.c b/drivers/i2c/muxes/i2c-mux-mlxcpld.c index 3dda00f1df78..4c6ed1d58c79 100644 --- a/drivers/i2c/muxes/i2c-mux-mlxcpld.c +++ b/drivers/i2c/muxes/i2c-mux-mlxcpld.c @@ -187,7 +187,7 @@ static struct platform_driver mlxcpld_mux_driver = { module_platform_driver(mlxcpld_mux_driver); -MODULE_AUTHOR("Michael Shych (michaels@mellanox.com)"); +MODULE_AUTHOR("Michael Shych <michaels@mellanox.com>"); MODULE_DESCRIPTION("Mellanox I2C-CPLD-MUX driver"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_ALIAS("platform:i2c-mux-mlxcpld"); diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index 2219062104fb..f5dfc33b97c0 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -57,6 +57,20 @@ #define PCA954X_IRQ_OFFSET 4 +/* + * MAX7357's configuration register is writeable after POR, but + * can be locked by setting the basic mode bit. MAX7358 configuration + * register is locked by default and needs to be unlocked first. + * The configuration register holds the following settings: + */ +#define MAX7357_CONF_INT_ENABLE BIT(0) +#define MAX7357_CONF_FLUSH_OUT BIT(1) +#define MAX7357_CONF_RELEASE_INT BIT(2) +#define MAX7357_CONF_DISCON_SINGLE_CHAN BIT(4) +#define MAX7357_CONF_PRECONNECT_TEST BIT(7) + +#define MAX7357_POR_DEFAULT_CONF MAX7357_CONF_INT_ENABLE + enum pca_type { max_7356, max_7357, @@ -470,7 +484,34 @@ static int pca954x_init(struct i2c_client *client, struct pca954x *data) else data->last_chan = 0; /* Disconnect multiplexer */ - ret = i2c_smbus_write_byte(client, data->last_chan); + if (device_is_compatible(&client->dev, "maxim,max7357")) { + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + u8 conf = MAX7357_POR_DEFAULT_CONF; + /* + * The interrupt signal is shared with the reset pin. Release the + * interrupt after 1.6 seconds to allow using the pin as reset. + */ + conf |= MAX7357_CONF_RELEASE_INT; + + if (device_property_read_bool(&client->dev, "maxim,isolate-stuck-channel")) + conf |= MAX7357_CONF_DISCON_SINGLE_CHAN; + if (device_property_read_bool(&client->dev, + "maxim,send-flush-out-sequence")) + conf |= MAX7357_CONF_FLUSH_OUT; + if (device_property_read_bool(&client->dev, + "maxim,preconnection-wiggle-test-enable")) + conf |= MAX7357_CONF_PRECONNECT_TEST; + + ret = i2c_smbus_write_byte_data(client, data->last_chan, conf); + } else { + dev_warn(&client->dev, "Write byte data not supported." + "Cannot enable enhanced mode features\n"); + ret = i2c_smbus_write_byte(client, data->last_chan); + } + } else { + ret = i2c_smbus_write_byte(client, data->last_chan); + } + if (ret < 0) data->last_chan = 0; |