diff options
Diffstat (limited to 'drivers/iio/adc')
-rw-r--r-- | drivers/iio/adc/Kconfig | 26 | ||||
-rw-r--r-- | drivers/iio/adc/Makefile | 2 | ||||
-rw-r--r-- | drivers/iio/adc/ad4130.c | 131 | ||||
-rw-r--r-- | drivers/iio/adc/ad7091r-base.c | 25 | ||||
-rw-r--r-- | drivers/iio/adc/ad9467.c | 267 | ||||
-rw-r--r-- | drivers/iio/adc/ad_sigma_delta.c | 21 | ||||
-rw-r--r-- | drivers/iio/adc/adi-axi-adc.c | 385 | ||||
-rw-r--r-- | drivers/iio/adc/max1363.c | 171 | ||||
-rw-r--r-- | drivers/iio/adc/mcp320x.c | 29 | ||||
-rw-r--r-- | drivers/iio/adc/pac1934.c | 1636 | ||||
-rw-r--r-- | drivers/iio/adc/qcom-pm8xxx-xoadc.c | 1 | ||||
-rw-r--r-- | drivers/iio/adc/rockchip_saradc.c | 17 | ||||
-rw-r--r-- | drivers/iio/adc/rtq6056.c | 275 | ||||
-rw-r--r-- | drivers/iio/adc/ti-adc108s102.c | 4 | ||||
-rw-r--r-- | drivers/iio/adc/ti-ads1015.c | 2 | ||||
-rw-r--r-- | drivers/iio/adc/ti-ads1298.c | 771 | ||||
-rw-r--r-- | drivers/iio/adc/ti-ads8688.c | 2 |
17 files changed, 3131 insertions, 634 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 3b73c509bd68..0d9282fa67f5 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -291,7 +291,7 @@ config AD799X config AD9467 tristate "Analog Devices AD9467 High Speed ADC driver" depends on SPI - depends on ADI_AXI_ADC + select IIO_BACKEND help Say yes here to build support for Analog Devices: * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter @@ -309,7 +309,7 @@ config ADI_AXI_ADC select IIO_BUFFER_HW_CONSUMER select IIO_BUFFER_DMAENGINE select REGMAP_MMIO - depends on OF + select IIO_BACKEND help Say yes here to build support for Analog Devices Generic AXI ADC IP core. The IP core is used for interfacing with @@ -930,6 +930,17 @@ config NPCM_ADC This driver can also be built as a module. If so, the module will be called npcm_adc. +config PAC1934 + tristate "Microchip Technology PAC1934 driver" + depends on I2C + help + Say yes here to build support for Microchip Technology's PAC1931, + PAC1932, PAC1933, PAC1934 Single/Multi-Channel Power Monitor with + Accumulator. + + This driver can also be built as a module. If so, the module + will be called pac1934. + config PALMAS_GPADC tristate "TI Palmas General Purpose ADC" depends on MFD_PALMAS @@ -1312,6 +1323,17 @@ config TI_ADS1100 This driver can also be built as a module. If so, the module will be called ti-ads1100. +config TI_ADS1298 + tristate "Texas Instruments ADS1298" + depends on SPI + select IIO_BUFFER + help + If you say yes here you get support for Texas Instruments ADS1298 + medical ADC chips + + This driver can also be built as a module. If so, the module will be + called ti-ads1298. + config TI_ADS7950 tristate "Texas Instruments ADS7950 ADC driver" depends on SPI && GPIOLIB diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index d2fda54a3259..b3c434722364 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_MP2629_ADC) += mp2629_adc.o obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o obj-$(CONFIG_NAU7802) += nau7802.o obj-$(CONFIG_NPCM_ADC) += npcm_adc.o +obj-$(CONFIG_PAC1934) += pac1934.o obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_ADC5) += qcom-spmi-adc5.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o @@ -116,6 +117,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o obj-$(CONFIG_TI_ADS1100) += ti-ads1100.o +obj-$(CONFIG_TI_ADS1298) += ti-ads1298.o obj-$(CONFIG_TI_ADS7924) += ti-ads7924.o obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o diff --git a/drivers/iio/adc/ad4130.c b/drivers/iio/adc/ad4130.c index 62490424b6ae..febb64e67955 100644 --- a/drivers/iio/adc/ad4130.c +++ b/drivers/iio/adc/ad4130.c @@ -887,9 +887,9 @@ static int ad4130_set_filter_mode(struct iio_dev *indio_dev, unsigned int old_fs; int ret = 0; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); if (setup_info->filter_mode == val) - goto out; + return 0; old_fs = setup_info->fs; old_filter_mode = setup_info->filter_mode; @@ -911,12 +911,10 @@ static int ad4130_set_filter_mode(struct iio_dev *indio_dev, if (ret) { setup_info->fs = old_fs; setup_info->filter_mode = old_filter_mode; + return ret; } - out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static int ad4130_get_filter_mode(struct iio_dev *indio_dev, @@ -927,9 +925,8 @@ static int ad4130_get_filter_mode(struct iio_dev *indio_dev, struct ad4130_setup_info *setup_info = &st->chans_info[channel].setup; enum ad4130_filter_mode filter_mode; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); filter_mode = setup_info->filter_mode; - mutex_unlock(&st->lock); return filter_mode; } @@ -971,7 +968,7 @@ static int ad4130_set_channel_pga(struct ad4130_state *st, unsigned int channel, struct ad4130_chan_info *chan_info = &st->chans_info[channel]; struct ad4130_setup_info *setup_info = &chan_info->setup; unsigned int pga, old_pga; - int ret = 0; + int ret; for (pga = 0; pga < AD4130_MAX_PGA; pga++) if (val == st->scale_tbls[setup_info->ref_sel][pga][0] && @@ -981,21 +978,20 @@ static int ad4130_set_channel_pga(struct ad4130_state *st, unsigned int channel, if (pga == AD4130_MAX_PGA) return -EINVAL; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); if (pga == setup_info->pga) - goto out; + return 0; old_pga = setup_info->pga; setup_info->pga = pga; ret = ad4130_write_channel_setup(st, channel, false); - if (ret) + if (ret) { setup_info->pga = old_pga; + return ret; + } -out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static int ad4130_set_channel_freq(struct ad4130_state *st, @@ -1004,26 +1000,25 @@ static int ad4130_set_channel_freq(struct ad4130_state *st, struct ad4130_chan_info *chan_info = &st->chans_info[channel]; struct ad4130_setup_info *setup_info = &chan_info->setup; unsigned int fs, old_fs; - int ret = 0; + int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); old_fs = setup_info->fs; ad4130_freq_to_fs(setup_info->filter_mode, val, val2, &fs); if (fs == setup_info->fs) - goto out; + return 0; setup_info->fs = fs; ret = ad4130_write_channel_setup(st, channel, false); - if (ret) + if (ret) { setup_info->fs = old_fs; + return ret; + } -out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static int _ad4130_read_sample(struct iio_dev *indio_dev, unsigned int channel, @@ -1065,20 +1060,13 @@ static int _ad4130_read_sample(struct iio_dev *indio_dev, unsigned int channel, static int ad4130_read_sample(struct iio_dev *indio_dev, unsigned int channel, int *val) { - struct ad4130_state *st = iio_priv(indio_dev); - int ret; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + struct ad4130_state *st = iio_priv(indio_dev); - mutex_lock(&st->lock); - ret = _ad4130_read_sample(indio_dev, channel, val); - mutex_unlock(&st->lock); - - iio_device_release_direct_mode(indio_dev); - - return ret; + guard(mutex)(&st->lock); + return _ad4130_read_sample(indio_dev, channel, val); + } + unreachable(); } static int ad4130_read_raw(struct iio_dev *indio_dev, @@ -1092,24 +1080,24 @@ static int ad4130_read_raw(struct iio_dev *indio_dev, switch (info) { case IIO_CHAN_INFO_RAW: return ad4130_read_sample(indio_dev, channel, val); - case IIO_CHAN_INFO_SCALE: - mutex_lock(&st->lock); + case IIO_CHAN_INFO_SCALE: { + guard(mutex)(&st->lock); *val = st->scale_tbls[setup_info->ref_sel][setup_info->pga][0]; *val2 = st->scale_tbls[setup_info->ref_sel][setup_info->pga][1]; - mutex_unlock(&st->lock); return IIO_VAL_INT_PLUS_NANO; + } case IIO_CHAN_INFO_OFFSET: *val = st->bipolar ? -BIT(chan->scan_type.realbits - 1) : 0; return IIO_VAL_INT; - case IIO_CHAN_INFO_SAMP_FREQ: - mutex_lock(&st->lock); + case IIO_CHAN_INFO_SAMP_FREQ: { + guard(mutex)(&st->lock); ad4130_fs_to_freq(setup_info->filter_mode, setup_info->fs, val, val2); - mutex_unlock(&st->lock); return IIO_VAL_INT_PLUS_NANO; + } default: return -EINVAL; } @@ -1134,9 +1122,9 @@ static int ad4130_read_avail(struct iio_dev *indio_dev, return IIO_AVAIL_LIST; case IIO_CHAN_INFO_SAMP_FREQ: - mutex_lock(&st->lock); - filter_config = &ad4130_filter_configs[setup_info->filter_mode]; - mutex_unlock(&st->lock); + scoped_guard(mutex, &st->lock) { + filter_config = &ad4130_filter_configs[setup_info->filter_mode]; + } *vals = (int *)filter_config->samp_freq_avail; *length = filter_config->samp_freq_avail_len * 2; @@ -1197,21 +1185,18 @@ static int ad4130_update_scan_mode(struct iio_dev *indio_dev, unsigned int val = 0; int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); for_each_set_bit(channel, scan_mask, indio_dev->num_channels) { ret = ad4130_set_channel_enable(st, channel, true); if (ret) - goto out; + return ret; val++; } st->num_enabled_channels = val; -out: - mutex_unlock(&st->lock); - return 0; } @@ -1232,22 +1217,19 @@ static int ad4130_set_fifo_watermark(struct iio_dev *indio_dev, unsigned int val */ eff = rounddown(AD4130_FIFO_SIZE, st->num_enabled_channels); - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = regmap_update_bits(st->regmap, AD4130_FIFO_CONTROL_REG, AD4130_FIFO_CONTROL_WM_MASK, FIELD_PREP(AD4130_FIFO_CONTROL_WM_MASK, ad4130_watermark_reg_val(eff))); if (ret) - goto out; + return ret; st->effective_watermark = eff; st->watermark = val; -out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static const struct iio_info ad4130_info = { @@ -1265,26 +1247,21 @@ static int ad4130_buffer_postenable(struct iio_dev *indio_dev) struct ad4130_state *st = iio_priv(indio_dev); int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = ad4130_set_watermark_interrupt_en(st, true); if (ret) - goto out; + return ret; ret = irq_set_irq_type(st->spi->irq, st->inv_irq_trigger); if (ret) - goto out; + return ret; ret = ad4130_set_fifo_mode(st, AD4130_FIFO_MODE_WM); if (ret) - goto out; - - ret = ad4130_set_mode(st, AD4130_MODE_CONTINUOUS); - -out: - mutex_unlock(&st->lock); + return ret; - return ret; + return ad4130_set_mode(st, AD4130_MODE_CONTINUOUS); } static int ad4130_buffer_predisable(struct iio_dev *indio_dev) @@ -1293,23 +1270,23 @@ static int ad4130_buffer_predisable(struct iio_dev *indio_dev) unsigned int i; int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = ad4130_set_mode(st, AD4130_MODE_IDLE); if (ret) - goto out; + return ret; ret = irq_set_irq_type(st->spi->irq, st->irq_trigger); if (ret) - goto out; + return ret; ret = ad4130_set_fifo_mode(st, AD4130_FIFO_MODE_DISABLED); if (ret) - goto out; + return ret; ret = ad4130_set_watermark_interrupt_en(st, false); if (ret) - goto out; + return ret; /* * update_scan_mode() is not called in the disable path, disable all @@ -1318,13 +1295,10 @@ static int ad4130_buffer_predisable(struct iio_dev *indio_dev) for (i = 0; i < indio_dev->num_channels; i++) { ret = ad4130_set_channel_enable(st, i, false); if (ret) - goto out; + return ret; } -out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static const struct iio_buffer_setup_ops ad4130_buffer_ops = { @@ -1338,9 +1312,8 @@ static ssize_t hwfifo_watermark_show(struct device *dev, struct ad4130_state *st = iio_priv(dev_to_iio_dev(dev)); unsigned int val; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); val = st->watermark; - mutex_unlock(&st->lock); return sysfs_emit(buf, "%d\n", val); } diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c index f4255b91acfc..d6876259ad14 100644 --- a/drivers/iio/adc/ad7091r-base.c +++ b/drivers/iio/adc/ad7091r-base.c @@ -86,28 +86,25 @@ static int ad7091r_read_raw(struct iio_dev *iio_dev, unsigned int read_val; int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); switch (m) { case IIO_CHAN_INFO_RAW: - if (st->mode != AD7091R_MODE_COMMAND) { - ret = -EBUSY; - goto unlock; - } + if (st->mode != AD7091R_MODE_COMMAND) + return -EBUSY; ret = ad7091r_read_one(iio_dev, chan->channel, &read_val); if (ret) - goto unlock; + return ret; *val = read_val; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: if (st->vref) { ret = regulator_get_voltage(st->vref); if (ret < 0) - goto unlock; + return ret; *val = ret / 1000; } else { @@ -115,17 +112,11 @@ static int ad7091r_read_raw(struct iio_dev *iio_dev, } *val2 = chan->scan_type.realbits; - ret = IIO_VAL_FRACTIONAL_LOG2; - break; + return IIO_VAL_FRACTIONAL_LOG2; default: - ret = -EINVAL; - break; + return -EINVAL; } - -unlock: - mutex_unlock(&st->lock); - return ret; } static int ad7091r_read_event_config(struct iio_dev *indio_dev, diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index 6581fce4ba95..7475ec2a56c7 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -17,13 +17,12 @@ #include <linux/of.h> +#include <linux/iio/backend.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/clk.h> -#include <linux/iio/adc/adi-axi-adc.h> - /* * ADI High-Speed ADC common spi interface registers * See Application-Note AN-877: @@ -102,15 +101,20 @@ #define AD9467_REG_VREF_MASK 0x0F struct ad9467_chip_info { - struct adi_axi_adc_chip_info axi_adc_info; - unsigned int default_output_mode; - unsigned int vref_mask; + const char *name; + unsigned int id; + const struct iio_chan_spec *channels; + unsigned int num_channels; + const unsigned int (*scale_table)[2]; + int num_scales; + unsigned long max_rate; + unsigned int default_output_mode; + unsigned int vref_mask; }; -#define to_ad9467_chip_info(_info) \ - container_of(_info, struct ad9467_chip_info, axi_adc_info) - struct ad9467_state { + const struct ad9467_chip_info *info; + struct iio_backend *back; struct spi_device *spi; struct clk *clk; unsigned int output_mode; @@ -151,10 +155,10 @@ static int ad9467_spi_write(struct spi_device *spi, unsigned int reg, return spi_write(spi, buf, ARRAY_SIZE(buf)); } -static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg, +static int ad9467_reg_access(struct iio_dev *indio_dev, unsigned int reg, unsigned int writeval, unsigned int *readval) { - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct ad9467_state *st = iio_priv(indio_dev); struct spi_device *spi = st->spi; int ret; @@ -191,10 +195,10 @@ static const unsigned int ad9467_scale_table[][2] = { {2300, 8}, {2400, 9}, {2500, 10}, }; -static void __ad9467_get_scale(struct adi_axi_adc_conv *conv, int index, +static void __ad9467_get_scale(struct ad9467_state *st, int index, unsigned int *val, unsigned int *val2) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; + const struct ad9467_chip_info *info = st->info; const struct iio_chan_spec *chan = &info->channels[0]; unsigned int tmp; @@ -229,52 +233,44 @@ static const struct iio_chan_spec ad9467_channels[] = { }; static const struct ad9467_chip_info ad9467_chip_tbl = { - .axi_adc_info = { - .name = "ad9467", - .id = CHIPID_AD9467, - .max_rate = 250000000UL, - .scale_table = ad9467_scale_table, - .num_scales = ARRAY_SIZE(ad9467_scale_table), - .channels = ad9467_channels, - .num_channels = ARRAY_SIZE(ad9467_channels), - }, + .name = "ad9467", + .id = CHIPID_AD9467, + .max_rate = 250000000UL, + .scale_table = ad9467_scale_table, + .num_scales = ARRAY_SIZE(ad9467_scale_table), + .channels = ad9467_channels, + .num_channels = ARRAY_SIZE(ad9467_channels), .default_output_mode = AD9467_DEF_OUTPUT_MODE, .vref_mask = AD9467_REG_VREF_MASK, }; static const struct ad9467_chip_info ad9434_chip_tbl = { - .axi_adc_info = { - .name = "ad9434", - .id = CHIPID_AD9434, - .max_rate = 500000000UL, - .scale_table = ad9434_scale_table, - .num_scales = ARRAY_SIZE(ad9434_scale_table), - .channels = ad9434_channels, - .num_channels = ARRAY_SIZE(ad9434_channels), - }, + .name = "ad9434", + .id = CHIPID_AD9434, + .max_rate = 500000000UL, + .scale_table = ad9434_scale_table, + .num_scales = ARRAY_SIZE(ad9434_scale_table), + .channels = ad9434_channels, + .num_channels = ARRAY_SIZE(ad9434_channels), .default_output_mode = AD9434_DEF_OUTPUT_MODE, .vref_mask = AD9434_REG_VREF_MASK, }; static const struct ad9467_chip_info ad9265_chip_tbl = { - .axi_adc_info = { - .name = "ad9265", - .id = CHIPID_AD9265, - .max_rate = 125000000UL, - .scale_table = ad9265_scale_table, - .num_scales = ARRAY_SIZE(ad9265_scale_table), - .channels = ad9467_channels, - .num_channels = ARRAY_SIZE(ad9467_channels), - }, + .name = "ad9265", + .id = CHIPID_AD9265, + .max_rate = 125000000UL, + .scale_table = ad9265_scale_table, + .num_scales = ARRAY_SIZE(ad9265_scale_table), + .channels = ad9467_channels, + .num_channels = ARRAY_SIZE(ad9467_channels), .default_output_mode = AD9265_DEF_OUTPUT_MODE, .vref_mask = AD9265_REG_VREF_MASK, }; -static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2) +static int ad9467_get_scale(struct ad9467_state *st, int *val, int *val2) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; - const struct ad9467_chip_info *info1 = to_ad9467_chip_info(info); - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + const struct ad9467_chip_info *info = st->info; unsigned int i, vref_val; int ret; @@ -282,7 +278,7 @@ static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2) if (ret < 0) return ret; - vref_val = ret & info1->vref_mask; + vref_val = ret & info->vref_mask; for (i = 0; i < info->num_scales; i++) { if (vref_val == info->scale_table[i][1]) @@ -292,15 +288,14 @@ static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2) if (i == info->num_scales) return -ERANGE; - __ad9467_get_scale(conv, i, val, val2); + __ad9467_get_scale(st, i, val, val2); return IIO_VAL_INT_PLUS_MICRO; } -static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2) +static int ad9467_set_scale(struct ad9467_state *st, int val, int val2) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + const struct ad9467_chip_info *info = st->info; unsigned int scale_val[2]; unsigned int i; int ret; @@ -309,7 +304,7 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2) return -EINVAL; for (i = 0; i < info->num_scales; i++) { - __ad9467_get_scale(conv, i, &scale_val[0], &scale_val[1]); + __ad9467_get_scale(st, i, &scale_val[0], &scale_val[1]); if (scale_val[0] != val || scale_val[1] != val2) continue; @@ -326,15 +321,15 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2) return -EINVAL; } -static int ad9467_read_raw(struct adi_axi_adc_conv *conv, +static int ad9467_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long m) { - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct ad9467_state *st = iio_priv(indio_dev); switch (m) { case IIO_CHAN_INFO_SCALE: - return ad9467_get_scale(conv, val, val2); + return ad9467_get_scale(st, val, val2); case IIO_CHAN_INFO_SAMP_FREQ: *val = clk_get_rate(st->clk); @@ -344,17 +339,17 @@ static int ad9467_read_raw(struct adi_axi_adc_conv *conv, } } -static int ad9467_write_raw(struct adi_axi_adc_conv *conv, +static int ad9467_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct ad9467_state *st = iio_priv(indio_dev); + const struct ad9467_chip_info *info = st->info; long r_clk; switch (mask) { case IIO_CHAN_INFO_SCALE: - return ad9467_set_scale(conv, val, val2); + return ad9467_set_scale(st, val, val2); case IIO_CHAN_INFO_SAMP_FREQ: r_clk = clk_round_rate(st->clk, val); if (r_clk < 0 || r_clk > info->max_rate) { @@ -369,13 +364,13 @@ static int ad9467_write_raw(struct adi_axi_adc_conv *conv, } } -static int ad9467_read_avail(struct adi_axi_adc_conv *conv, +static int ad9467_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, const int **vals, int *type, int *length, long mask) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct ad9467_state *st = iio_priv(indio_dev); + const struct ad9467_chip_info *info = st->info; switch (mask) { case IIO_CHAN_INFO_SCALE: @@ -389,6 +384,33 @@ static int ad9467_read_avail(struct adi_axi_adc_conv *conv, } } +static int ad9467_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) +{ + struct ad9467_state *st = iio_priv(indio_dev); + unsigned int c; + int ret; + + for (c = 0; c < st->info->num_channels; c++) { + if (test_bit(c, scan_mask)) + ret = iio_backend_chan_enable(st->back, c); + else + ret = iio_backend_chan_disable(st->back, c); + if (ret) + return ret; + } + + return 0; +} + +static const struct iio_info ad9467_info = { + .read_raw = ad9467_read_raw, + .write_raw = ad9467_write_raw, + .update_scan_mode = ad9467_update_scan_mode, + .debugfs_reg_access = ad9467_reg_access, + .read_avail = ad9467_read_avail, +}; + static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode) { int ret; @@ -401,10 +423,9 @@ static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode) AN877_ADC_TRANSFER_SYNC); } -static int ad9467_scale_fill(struct adi_axi_adc_conv *conv) +static int ad9467_scale_fill(struct ad9467_state *st) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + const struct ad9467_chip_info *info = st->info; unsigned int i, val1, val2; st->scales = devm_kmalloc_array(&st->spi->dev, info->num_scales, @@ -413,7 +434,7 @@ static int ad9467_scale_fill(struct adi_axi_adc_conv *conv) return -ENOMEM; for (i = 0; i < info->num_scales; i++) { - __ad9467_get_scale(conv, i, &val1, &val2); + __ad9467_get_scale(st, i, &val1, &val2); st->scales[i][0] = val1; st->scales[i][1] = val2; } @@ -421,11 +442,27 @@ static int ad9467_scale_fill(struct adi_axi_adc_conv *conv) return 0; } -static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv) +static int ad9467_setup(struct ad9467_state *st) { - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct iio_backend_data_fmt data = { + .sign_extend = true, + .enable = true, + }; + unsigned int c, mode; + int ret; + + mode = st->info->default_output_mode | AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT; + ret = ad9467_outputmode_set(st->spi, mode); + if (ret) + return ret; - return ad9467_outputmode_set(st->spi, st->output_mode); + for (c = 0; c < st->info->num_channels; c++) { + ret = iio_backend_data_format_set(st->back, c, &data); + if (ret) + return ret; + } + + return 0; } static int ad9467_reset(struct device *dev) @@ -443,25 +480,65 @@ static int ad9467_reset(struct device *dev) return 0; } +static int ad9467_iio_backend_get(struct ad9467_state *st) +{ + struct device *dev = &st->spi->dev; + struct device_node *__back; + + st->back = devm_iio_backend_get(dev, NULL); + if (!IS_ERR(st->back)) + return 0; + /* If not found, don't error out as we might have legacy DT property */ + if (PTR_ERR(st->back) != -ENOENT) + return PTR_ERR(st->back); + + /* + * if we don't get the backend using the normal API's, use the legacy + * 'adi,adc-dev' property. So we get all nodes with that property, and + * look for the one pointing at us. Then we directly lookup that fwnode + * on the backend list of registered devices. This is done so we don't + * make io-backends mandatory which would break DT ABI. + */ + for_each_node_with_property(__back, "adi,adc-dev") { + struct device_node *__me; + + __me = of_parse_phandle(__back, "adi,adc-dev", 0); + if (!__me) + continue; + + if (!device_match_of_node(dev, __me)) { + of_node_put(__me); + continue; + } + + of_node_put(__me); + st->back = __devm_iio_backend_get_from_fwnode_lookup(dev, + of_fwnode_handle(__back)); + of_node_put(__back); + return PTR_ERR_OR_ZERO(st->back); + } + + return -ENODEV; +} + static int ad9467_probe(struct spi_device *spi) { - const struct ad9467_chip_info *info; - struct adi_axi_adc_conv *conv; + struct iio_dev *indio_dev; struct ad9467_state *st; unsigned int id; int ret; - info = spi_get_device_match_data(spi); - if (!info) - return -ENODEV; - - conv = devm_adi_axi_adc_conv_register(&spi->dev, sizeof(*st)); - if (IS_ERR(conv)) - return PTR_ERR(conv); + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; - st = adi_axi_adc_conv_priv(conv); + st = iio_priv(indio_dev); st->spi = spi; + st->info = spi_get_device_match_data(spi); + if (!st->info) + return -ENODEV; + st->clk = devm_clk_get_enabled(&spi->dev, "adc-clk"); if (IS_ERR(st->clk)) return PTR_ERR(st->clk); @@ -475,29 +552,39 @@ static int ad9467_probe(struct spi_device *spi) if (ret) return ret; - conv->chip_info = &info->axi_adc_info; - - ret = ad9467_scale_fill(conv); + ret = ad9467_scale_fill(st); if (ret) return ret; id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID); - if (id != conv->chip_info->id) { + if (id != st->info->id) { dev_err(&spi->dev, "Mismatch CHIP_ID, got 0x%X, expected 0x%X\n", - id, conv->chip_info->id); + id, st->info->id); return -ENODEV; } - conv->reg_access = ad9467_reg_access; - conv->write_raw = ad9467_write_raw; - conv->read_raw = ad9467_read_raw; - conv->read_avail = ad9467_read_avail; - conv->preenable_setup = ad9467_preenable_setup; + indio_dev->name = st->info->name; + indio_dev->channels = st->info->channels; + indio_dev->num_channels = st->info->num_channels; + indio_dev->info = &ad9467_info; - st->output_mode = info->default_output_mode | - AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT; + ret = ad9467_iio_backend_get(st); + if (ret) + return ret; - return 0; + ret = devm_iio_backend_request_buffer(&spi->dev, st->back, indio_dev); + if (ret) + return ret; + + ret = devm_iio_backend_enable(&spi->dev, st->back); + if (ret) + return ret; + + ret = ad9467_setup(st); + if (ret) + return ret; + + return devm_iio_device_register(&spi->dev, indio_dev); } static const struct of_device_id ad9467_of_match[] = { @@ -529,4 +616,4 @@ module_spi_driver(ad9467_driver); MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); MODULE_DESCRIPTION("Analog Devices AD9467 ADC driver"); MODULE_LICENSE("GPL v2"); -MODULE_IMPORT_NS(IIO_ADI_AXI); +MODULE_IMPORT_NS(IIO_BACKEND); diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c index 7e2192870743..a602429cdde4 100644 --- a/drivers/iio/adc/ad_sigma_delta.c +++ b/drivers/iio/adc/ad_sigma_delta.c @@ -212,7 +212,7 @@ int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta, if (ret) return ret; - spi_bus_lock(sigma_delta->spi->master); + spi_bus_lock(sigma_delta->spi->controller); sigma_delta->bus_locked = true; sigma_delta->keep_cs_asserted = true; reinit_completion(&sigma_delta->completion); @@ -235,7 +235,7 @@ out: sigma_delta->keep_cs_asserted = false; ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE); sigma_delta->bus_locked = false; - spi_bus_unlock(sigma_delta->spi->master); + spi_bus_unlock(sigma_delta->spi->controller); return ret; } @@ -287,7 +287,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev, ad_sigma_delta_set_channel(sigma_delta, chan->address); - spi_bus_lock(sigma_delta->spi->master); + spi_bus_lock(sigma_delta->spi->controller); sigma_delta->bus_locked = true; sigma_delta->keep_cs_asserted = true; reinit_completion(&sigma_delta->completion); @@ -322,7 +322,7 @@ out: sigma_delta->keep_cs_asserted = false; ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE); sigma_delta->bus_locked = false; - spi_bus_unlock(sigma_delta->spi->master); + spi_bus_unlock(sigma_delta->spi->controller); iio_device_release_direct_mode(indio_dev); if (ret) @@ -387,7 +387,7 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev) sigma_delta->samples_buf = samples_buf; - spi_bus_lock(sigma_delta->spi->master); + spi_bus_lock(sigma_delta->spi->controller); sigma_delta->bus_locked = true; sigma_delta->keep_cs_asserted = true; @@ -401,7 +401,7 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev) return 0; err_unlock: - spi_bus_unlock(sigma_delta->spi->master); + spi_bus_unlock(sigma_delta->spi->controller); return ret; } @@ -426,7 +426,7 @@ static int ad_sd_buffer_postdisable(struct iio_dev *indio_dev) ad_sigma_delta_disable_all(sigma_delta); sigma_delta->bus_locked = false; - return spi_bus_unlock(sigma_delta->spi->master); + return spi_bus_unlock(sigma_delta->spi->controller); } static irqreturn_t ad_sd_trigger_handler(int irq, void *p) @@ -568,6 +568,7 @@ EXPORT_SYMBOL_NS_GPL(ad_sd_validate_trigger, IIO_AD_SIGMA_DELTA); static int devm_ad_sd_probe_trigger(struct device *dev, struct iio_dev *indio_dev) { struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev); + unsigned long irq_flags = irq_get_trigger_type(sigma_delta->spi->irq); int ret; if (dev != &sigma_delta->spi->dev) { @@ -588,9 +589,13 @@ static int devm_ad_sd_probe_trigger(struct device *dev, struct iio_dev *indio_de /* the IRQ core clears IRQ_DISABLE_UNLAZY flag when freeing an IRQ */ irq_set_status_flags(sigma_delta->spi->irq, IRQ_DISABLE_UNLAZY); + /* Allow overwriting the flags from firmware */ + if (!irq_flags) + irq_flags = sigma_delta->info->irq_flags; + ret = devm_request_irq(dev, sigma_delta->spi->irq, ad_sd_data_rdy_trig_poll, - sigma_delta->info->irq_flags | IRQF_NO_AUTOEN, + irq_flags | IRQF_NO_AUTOEN, indio_dev->name, sigma_delta); if (ret) diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c index c247ff1541d2..4156639b3c8b 100644 --- a/drivers/iio/adc/adi-axi-adc.c +++ b/drivers/iio/adc/adi-axi-adc.c @@ -8,6 +8,7 @@ #include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/delay.h> #include <linux/module.h> @@ -17,13 +18,12 @@ #include <linux/regmap.h> #include <linux/slab.h> -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include <linux/iio/buffer.h> -#include <linux/iio/buffer-dmaengine.h> - #include <linux/fpga/adi-axi-common.h> -#include <linux/iio/adc/adi-axi-adc.h> + +#include <linux/iio/backend.h> +#include <linux/iio/buffer-dmaengine.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> /* * Register definitions: @@ -44,6 +44,7 @@ #define ADI_AXI_REG_CHAN_CTRL_PN_SEL_OWR BIT(10) #define ADI_AXI_REG_CHAN_CTRL_IQCOR_EN BIT(9) #define ADI_AXI_REG_CHAN_CTRL_DCFILT_EN BIT(8) +#define ADI_AXI_REG_CHAN_CTRL_FMT_MASK GENMASK(6, 4) #define ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT BIT(6) #define ADI_AXI_REG_CHAN_CTRL_FMT_TYPE BIT(5) #define ADI_AXI_REG_CHAN_CTRL_FMT_EN BIT(4) @@ -55,286 +56,100 @@ ADI_AXI_REG_CHAN_CTRL_FMT_EN | \ ADI_AXI_REG_CHAN_CTRL_ENABLE) -struct adi_axi_adc_core_info { - unsigned int version; -}; - struct adi_axi_adc_state { - struct mutex lock; - - struct adi_axi_adc_client *client; struct regmap *regmap; -}; - -struct adi_axi_adc_client { - struct list_head entry; - struct adi_axi_adc_conv conv; - struct adi_axi_adc_state *state; struct device *dev; - const struct adi_axi_adc_core_info *info; }; -static LIST_HEAD(registered_clients); -static DEFINE_MUTEX(registered_clients_lock); - -static struct adi_axi_adc_client *conv_to_client(struct adi_axi_adc_conv *conv) -{ - return container_of(conv, struct adi_axi_adc_client, conv); -} - -void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv) -{ - struct adi_axi_adc_client *cl = conv_to_client(conv); - - return (char *)cl + ALIGN(sizeof(struct adi_axi_adc_client), - IIO_DMA_MINALIGN); -} -EXPORT_SYMBOL_NS_GPL(adi_axi_adc_conv_priv, IIO_ADI_AXI); - -static int adi_axi_adc_config_dma_buffer(struct device *dev, - struct iio_dev *indio_dev) -{ - const char *dma_name; - - if (!device_property_present(dev, "dmas")) - return 0; - - if (device_property_read_string(dev, "dma-names", &dma_name)) - dma_name = "rx"; - - return devm_iio_dmaengine_buffer_setup(indio_dev->dev.parent, - indio_dev, dma_name); -} - -static int adi_axi_adc_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, int *val2, long mask) -{ - struct adi_axi_adc_state *st = iio_priv(indio_dev); - struct adi_axi_adc_conv *conv = &st->client->conv; - - if (!conv->read_raw) - return -EOPNOTSUPP; - - return conv->read_raw(conv, chan, val, val2, mask); -} - -static int adi_axi_adc_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, int val2, long mask) -{ - struct adi_axi_adc_state *st = iio_priv(indio_dev); - struct adi_axi_adc_conv *conv = &st->client->conv; - - if (!conv->write_raw) - return -EOPNOTSUPP; - - return conv->write_raw(conv, chan, val, val2, mask); -} - -static int adi_axi_adc_read_avail(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - const int **vals, int *type, int *length, - long mask) -{ - struct adi_axi_adc_state *st = iio_priv(indio_dev); - struct adi_axi_adc_conv *conv = &st->client->conv; - - if (!conv->read_avail) - return -EOPNOTSUPP; - - return conv->read_avail(conv, chan, vals, type, length, mask); -} - -static int adi_axi_adc_update_scan_mode(struct iio_dev *indio_dev, - const unsigned long *scan_mask) +static int axi_adc_enable(struct iio_backend *back) { - struct adi_axi_adc_state *st = iio_priv(indio_dev); - struct adi_axi_adc_conv *conv = &st->client->conv; - unsigned int i; + struct adi_axi_adc_state *st = iio_backend_get_priv(back); int ret; - for (i = 0; i < conv->chip_info->num_channels; i++) { - if (test_bit(i, scan_mask)) - ret = regmap_set_bits(st->regmap, - ADI_AXI_REG_CHAN_CTRL(i), - ADI_AXI_REG_CHAN_CTRL_ENABLE); - else - ret = regmap_clear_bits(st->regmap, - ADI_AXI_REG_CHAN_CTRL(i), - ADI_AXI_REG_CHAN_CTRL_ENABLE); - if (ret) - return ret; - } - - return 0; -} - -static struct adi_axi_adc_conv *adi_axi_adc_conv_register(struct device *dev, - size_t sizeof_priv) -{ - struct adi_axi_adc_client *cl; - size_t alloc_size; - - alloc_size = ALIGN(sizeof(struct adi_axi_adc_client), IIO_DMA_MINALIGN); - if (sizeof_priv) - alloc_size += ALIGN(sizeof_priv, IIO_DMA_MINALIGN); - - cl = kzalloc(alloc_size, GFP_KERNEL); - if (!cl) - return ERR_PTR(-ENOMEM); - - mutex_lock(®istered_clients_lock); - - cl->dev = get_device(dev); - - list_add_tail(&cl->entry, ®istered_clients); - - mutex_unlock(®istered_clients_lock); + ret = regmap_set_bits(st->regmap, ADI_AXI_REG_RSTN, + ADI_AXI_REG_RSTN_MMCM_RSTN); + if (ret) + return ret; - return &cl->conv; + fsleep(10000); + return regmap_set_bits(st->regmap, ADI_AXI_REG_RSTN, + ADI_AXI_REG_RSTN_RSTN | ADI_AXI_REG_RSTN_MMCM_RSTN); } -static void adi_axi_adc_conv_unregister(struct adi_axi_adc_conv *conv) +static void axi_adc_disable(struct iio_backend *back) { - struct adi_axi_adc_client *cl = conv_to_client(conv); - - mutex_lock(®istered_clients_lock); - - list_del(&cl->entry); - put_device(cl->dev); + struct adi_axi_adc_state *st = iio_backend_get_priv(back); - mutex_unlock(®istered_clients_lock); - - kfree(cl); + regmap_write(st->regmap, ADI_AXI_REG_RSTN, 0); } -static void devm_adi_axi_adc_conv_release(void *conv) +static int axi_adc_data_format_set(struct iio_backend *back, unsigned int chan, + const struct iio_backend_data_fmt *data) { - adi_axi_adc_conv_unregister(conv); + struct adi_axi_adc_state *st = iio_backend_get_priv(back); + u32 val; + + if (!data->enable) + return regmap_clear_bits(st->regmap, + ADI_AXI_REG_CHAN_CTRL(chan), + ADI_AXI_REG_CHAN_CTRL_FMT_EN); + + val = FIELD_PREP(ADI_AXI_REG_CHAN_CTRL_FMT_EN, true); + if (data->sign_extend) + val |= FIELD_PREP(ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT, true); + if (data->type == IIO_BACKEND_OFFSET_BINARY) + val |= FIELD_PREP(ADI_AXI_REG_CHAN_CTRL_FMT_TYPE, true); + + return regmap_update_bits(st->regmap, ADI_AXI_REG_CHAN_CTRL(chan), + ADI_AXI_REG_CHAN_CTRL_FMT_MASK, val); } -struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev, - size_t sizeof_priv) +static int axi_adc_chan_enable(struct iio_backend *back, unsigned int chan) { - struct adi_axi_adc_conv *conv; - int ret; - - conv = adi_axi_adc_conv_register(dev, sizeof_priv); - if (IS_ERR(conv)) - return conv; + struct adi_axi_adc_state *st = iio_backend_get_priv(back); - ret = devm_add_action_or_reset(dev, devm_adi_axi_adc_conv_release, - conv); - if (ret) - return ERR_PTR(ret); - - return conv; + return regmap_set_bits(st->regmap, ADI_AXI_REG_CHAN_CTRL(chan), + ADI_AXI_REG_CHAN_CTRL_ENABLE); } -EXPORT_SYMBOL_NS_GPL(devm_adi_axi_adc_conv_register, IIO_ADI_AXI); - -static const struct iio_info adi_axi_adc_info = { - .read_raw = &adi_axi_adc_read_raw, - .write_raw = &adi_axi_adc_write_raw, - .update_scan_mode = &adi_axi_adc_update_scan_mode, - .read_avail = &adi_axi_adc_read_avail, -}; - -static const struct adi_axi_adc_core_info adi_axi_adc_10_0_a_info = { - .version = ADI_AXI_PCORE_VER(10, 0, 'a'), -}; -static struct adi_axi_adc_client *adi_axi_adc_attach_client(struct device *dev) +static int axi_adc_chan_disable(struct iio_backend *back, unsigned int chan) { - const struct adi_axi_adc_core_info *info; - struct adi_axi_adc_client *cl; - struct device_node *cln; - - info = of_device_get_match_data(dev); - if (!info) - return ERR_PTR(-ENODEV); - - cln = of_parse_phandle(dev->of_node, "adi,adc-dev", 0); - if (!cln) { - dev_err(dev, "No 'adi,adc-dev' node defined\n"); - return ERR_PTR(-ENODEV); - } - - mutex_lock(®istered_clients_lock); - - list_for_each_entry(cl, ®istered_clients, entry) { - if (!cl->dev) - continue; - - if (cl->dev->of_node != cln) - continue; - - if (!try_module_get(cl->dev->driver->owner)) { - mutex_unlock(®istered_clients_lock); - of_node_put(cln); - return ERR_PTR(-ENODEV); - } - - get_device(cl->dev); - cl->info = info; - mutex_unlock(®istered_clients_lock); - of_node_put(cln); - return cl; - } + struct adi_axi_adc_state *st = iio_backend_get_priv(back); - mutex_unlock(®istered_clients_lock); - of_node_put(cln); - - return ERR_PTR(-EPROBE_DEFER); + return regmap_clear_bits(st->regmap, ADI_AXI_REG_CHAN_CTRL(chan), + ADI_AXI_REG_CHAN_CTRL_ENABLE); } -static int adi_axi_adc_setup_channels(struct device *dev, - struct adi_axi_adc_state *st) +static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back, + struct iio_dev *indio_dev) { - struct adi_axi_adc_conv *conv = &st->client->conv; - int i, ret; + struct adi_axi_adc_state *st = iio_backend_get_priv(back); + struct iio_buffer *buffer; + const char *dma_name; + int ret; - if (conv->preenable_setup) { - ret = conv->preenable_setup(conv); - if (ret) - return ret; - } + if (device_property_read_string(st->dev, "dma-names", &dma_name)) + dma_name = "rx"; - for (i = 0; i < conv->chip_info->num_channels; i++) { - ret = regmap_write(st->regmap, ADI_AXI_REG_CHAN_CTRL(i), - ADI_AXI_REG_CHAN_CTRL_DEFAULTS); - if (ret) - return ret; + buffer = iio_dmaengine_buffer_alloc(st->dev, dma_name); + if (IS_ERR(buffer)) { + dev_err(st->dev, "Could not get DMA buffer, %ld\n", + PTR_ERR(buffer)); + return ERR_CAST(buffer); } - return 0; -} - -static int axi_adc_reset(struct adi_axi_adc_state *st) -{ - int ret; - - ret = regmap_write(st->regmap, ADI_AXI_REG_RSTN, 0); - if (ret) - return ret; - - mdelay(10); - ret = regmap_write(st->regmap, ADI_AXI_REG_RSTN, - ADI_AXI_REG_RSTN_MMCM_RSTN); + indio_dev->modes |= INDIO_BUFFER_HARDWARE; + ret = iio_device_attach_buffer(indio_dev, buffer); if (ret) - return ret; + return ERR_PTR(ret); - mdelay(10); - return regmap_write(st->regmap, ADI_AXI_REG_RSTN, - ADI_AXI_REG_RSTN_RSTN | ADI_AXI_REG_RSTN_MMCM_RSTN); + return buffer; } -static void adi_axi_adc_cleanup(void *data) +static void axi_adc_free_buffer(struct iio_backend *back, + struct iio_buffer *buffer) { - struct adi_axi_adc_client *cl = data; - - put_device(cl->dev); - module_put(cl->dev->driver->owner); + iio_dmaengine_buffer_free(buffer); } static const struct regmap_config axi_adc_regmap_config = { @@ -344,45 +159,47 @@ static const struct regmap_config axi_adc_regmap_config = { .max_register = 0x0800, }; +static const struct iio_backend_ops adi_axi_adc_generic = { + .enable = axi_adc_enable, + .disable = axi_adc_disable, + .data_format_set = axi_adc_data_format_set, + .chan_enable = axi_adc_chan_enable, + .chan_disable = axi_adc_chan_disable, + .request_buffer = axi_adc_request_buffer, + .free_buffer = axi_adc_free_buffer, +}; + static int adi_axi_adc_probe(struct platform_device *pdev) { - struct adi_axi_adc_conv *conv; - struct iio_dev *indio_dev; - struct adi_axi_adc_client *cl; + const unsigned int *expected_ver; struct adi_axi_adc_state *st; void __iomem *base; unsigned int ver; int ret; - cl = adi_axi_adc_attach_client(&pdev->dev); - if (IS_ERR(cl)) - return PTR_ERR(cl); - - ret = devm_add_action_or_reset(&pdev->dev, adi_axi_adc_cleanup, cl); - if (ret) - return ret; - - indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); - if (indio_dev == NULL) + st = devm_kzalloc(&pdev->dev, sizeof(*st), GFP_KERNEL); + if (!st) return -ENOMEM; - st = iio_priv(indio_dev); - st->client = cl; - cl->state = st; - mutex_init(&st->lock); - base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); + st->dev = &pdev->dev; st->regmap = devm_regmap_init_mmio(&pdev->dev, base, &axi_adc_regmap_config); if (IS_ERR(st->regmap)) return PTR_ERR(st->regmap); - conv = &st->client->conv; + expected_ver = device_get_match_data(&pdev->dev); + if (!expected_ver) + return -ENODEV; - ret = axi_adc_reset(st); + /* + * Force disable the core. Up to the frontend to enable us. And we can + * still read/write registers... + */ + ret = regmap_write(st->regmap, ADI_AXI_REG_RSTN, 0); if (ret) return ret; @@ -390,33 +207,19 @@ static int adi_axi_adc_probe(struct platform_device *pdev) if (ret) return ret; - if (cl->info->version > ver) { + if (*expected_ver > ver) { dev_err(&pdev->dev, "IP core version is too old. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n", - ADI_AXI_PCORE_VER_MAJOR(cl->info->version), - ADI_AXI_PCORE_VER_MINOR(cl->info->version), - ADI_AXI_PCORE_VER_PATCH(cl->info->version), + ADI_AXI_PCORE_VER_MAJOR(*expected_ver), + ADI_AXI_PCORE_VER_MINOR(*expected_ver), + ADI_AXI_PCORE_VER_PATCH(*expected_ver), ADI_AXI_PCORE_VER_MAJOR(ver), ADI_AXI_PCORE_VER_MINOR(ver), ADI_AXI_PCORE_VER_PATCH(ver)); return -ENODEV; } - indio_dev->info = &adi_axi_adc_info; - indio_dev->name = "adi-axi-adc"; - indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->num_channels = conv->chip_info->num_channels; - indio_dev->channels = conv->chip_info->channels; - - ret = adi_axi_adc_config_dma_buffer(&pdev->dev, indio_dev); - if (ret) - return ret; - - ret = adi_axi_adc_setup_channels(&pdev->dev, st); - if (ret) - return ret; - - ret = devm_iio_device_register(&pdev->dev, indio_dev); + ret = devm_iio_backend_register(&pdev->dev, &adi_axi_adc_generic, st); if (ret) return ret; @@ -428,6 +231,8 @@ static int adi_axi_adc_probe(struct platform_device *pdev) return 0; } +static unsigned int adi_axi_adc_10_0_a_info = ADI_AXI_PCORE_VER(10, 0, 'a'); + /* Match table for of_platform binding */ static const struct of_device_id adi_axi_adc_of_match[] = { { .compatible = "adi,axi-adc-10.0.a", .data = &adi_axi_adc_10_0_a_info }, @@ -447,3 +252,5 @@ module_platform_driver(adi_axi_adc_driver); MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); MODULE_DESCRIPTION("Analog Devices Generic AXI ADC IP core driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_DMAENGINE_BUFFER); +MODULE_IMPORT_NS(IIO_BACKEND); diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index 7c2a98b8c3a9..8b5bc96cb9fb 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -357,62 +357,55 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, int *val, long m) { - int ret = 0; - s32 data; - u8 rxbuf[2]; - struct max1363_state *st = iio_priv(indio_dev); - struct i2c_client *client = st->client; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); - - /* - * If monitor mode is enabled, the method for reading a single - * channel will have to be rather different and has not yet - * been implemented. - * - * Also, cannot read directly if buffered capture enabled. - */ - if (st->monitor_on) { - ret = -EBUSY; - goto error_ret; - } - - /* Check to see if current scan mode is correct */ - if (st->current_mode != &max1363_mode_table[chan->address]) { - /* Update scan mode if needed */ - st->current_mode = &max1363_mode_table[chan->address]; - ret = max1363_set_scan_mode(st); - if (ret < 0) - goto error_ret; - } - if (st->chip_info->bits != 8) { - /* Get reading */ - data = st->recv(client, rxbuf, 2); - if (data < 0) { - ret = data; - goto error_ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + s32 data; + u8 rxbuf[2]; + struct max1363_state *st = iio_priv(indio_dev); + struct i2c_client *client = st->client; + + guard(mutex)(&st->lock); + + /* + * If monitor mode is enabled, the method for reading a single + * channel will have to be rather different and has not yet + * been implemented. + * + * Also, cannot read directly if buffered capture enabled. + */ + if (st->monitor_on) + return -EBUSY; + + /* Check to see if current scan mode is correct */ + if (st->current_mode != &max1363_mode_table[chan->address]) { + int ret; + + /* Update scan mode if needed */ + st->current_mode = &max1363_mode_table[chan->address]; + ret = max1363_set_scan_mode(st); + if (ret < 0) + return ret; } - data = (rxbuf[1] | rxbuf[0] << 8) & - ((1 << st->chip_info->bits) - 1); - } else { - /* Get reading */ - data = st->recv(client, rxbuf, 1); - if (data < 0) { - ret = data; - goto error_ret; + if (st->chip_info->bits != 8) { + /* Get reading */ + data = st->recv(client, rxbuf, 2); + if (data < 0) + return data; + + data = (rxbuf[1] | rxbuf[0] << 8) & + ((1 << st->chip_info->bits) - 1); + } else { + /* Get reading */ + data = st->recv(client, rxbuf, 1); + if (data < 0) + return data; + + data = rxbuf[0]; } - data = rxbuf[0]; - } - *val = data; - -error_ret: - mutex_unlock(&st->lock); - iio_device_release_direct_mode(indio_dev); - return ret; + *val = data; + return 0; + } + unreachable(); } static int max1363_read_raw(struct iio_dev *indio_dev, @@ -710,9 +703,8 @@ static ssize_t max1363_monitor_store_freq(struct device *dev, if (!found) return -EINVAL; - mutex_lock(&st->lock); - st->monitor_speed = i; - mutex_unlock(&st->lock); + scoped_guard(mutex, &st->lock) + st->monitor_speed = i; return 0; } @@ -815,12 +807,11 @@ static int max1363_read_event_config(struct iio_dev *indio_dev, int val; int number = chan->channel; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); if (dir == IIO_EV_DIR_FALLING) val = (1 << number) & st->mask_low; else val = (1 << number) & st->mask_high; - mutex_unlock(&st->lock); return val; } @@ -962,46 +953,42 @@ static int max1363_write_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, int state) { - int ret = 0; struct max1363_state *st = iio_priv(indio_dev); - u16 unifiedmask; - int number = chan->channel; - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); - - unifiedmask = st->mask_low | st->mask_high; - if (dir == IIO_EV_DIR_FALLING) { - - if (state == 0) - st->mask_low &= ~(1 << number); - else { - ret = __max1363_check_event_mask((1 << number), - unifiedmask); - if (ret) - goto error_ret; - st->mask_low |= (1 << number); - } - } else { - if (state == 0) - st->mask_high &= ~(1 << number); - else { - ret = __max1363_check_event_mask((1 << number), - unifiedmask); - if (ret) - goto error_ret; - st->mask_high |= (1 << number); + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + int number = chan->channel; + u16 unifiedmask; + int ret; + + guard(mutex)(&st->lock); + + unifiedmask = st->mask_low | st->mask_high; + if (dir == IIO_EV_DIR_FALLING) { + + if (state == 0) + st->mask_low &= ~(1 << number); + else { + ret = __max1363_check_event_mask((1 << number), + unifiedmask); + if (ret) + return ret; + st->mask_low |= (1 << number); + } + } else { + if (state == 0) + st->mask_high &= ~(1 << number); + else { + ret = __max1363_check_event_mask((1 << number), + unifiedmask); + if (ret) + return ret; + st->mask_high |= (1 << number); + } } } - max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low)); -error_ret: - mutex_unlock(&st->lock); - iio_device_release_direct_mode(indio_dev); - return ret; + return 0; } /* diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index f3b81798b3c9..da1421bd7b62 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -371,6 +371,11 @@ static const struct mcp320x_chip_info mcp320x_chip_infos[] = { }, }; +static void mcp320x_regulator_disable(void *reg) +{ + regulator_disable(reg); +} + static int mcp320x_probe(struct spi_device *spi) { struct iio_dev *indio_dev; @@ -388,7 +393,6 @@ static int mcp320x_probe(struct spi_device *spi) indio_dev->name = spi_get_device_id(spi)->name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &mcp320x_info; - spi_set_drvdata(spi, indio_dev); device_index = spi_get_device_id(spi)->driver_data; chip_info = &mcp320x_chip_infos[device_index]; @@ -445,27 +449,13 @@ static int mcp320x_probe(struct spi_device *spi) if (ret < 0) return ret; - mutex_init(&adc->lock); - - ret = iio_device_register(indio_dev); + ret = devm_add_action_or_reset(&spi->dev, mcp320x_regulator_disable, adc->reg); if (ret < 0) - goto reg_disable; - - return 0; - -reg_disable: - regulator_disable(adc->reg); - - return ret; -} + return ret; -static void mcp320x_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct mcp320x *adc = iio_priv(indio_dev); + mutex_init(&adc->lock); - iio_device_unregister(indio_dev); - regulator_disable(adc->reg); + return devm_iio_device_register(&spi->dev, indio_dev); } static const struct of_device_id mcp320x_dt_ids[] = { @@ -520,7 +510,6 @@ static struct spi_driver mcp320x_driver = { .of_match_table = mcp320x_dt_ids, }, .probe = mcp320x_probe, - .remove = mcp320x_remove, .id_table = mcp320x_id, }; module_spi_driver(mcp320x_driver); diff --git a/drivers/iio/adc/pac1934.c b/drivers/iio/adc/pac1934.c new file mode 100644 index 000000000000..e0c2742da523 --- /dev/null +++ b/drivers/iio/adc/pac1934.c @@ -0,0 +1,1636 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * IIO driver for PAC1934 Multi-Channel DC Power/Energy Monitor + * + * Copyright (C) 2017-2024 Microchip Technology Inc. and its subsidiaries + * + * Author: Bogdan Bolocan <bogdan.bolocan@microchip.com> + * Author: Victor Tudose + * Author: Marius Cristea <marius.cristea@microchip.com> + * + * Datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here: + * https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf + */ + +#include <linux/acpi.h> +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <asm/unaligned.h> + +/* + * maximum accumulation time should be (17 * 60 * 1000) around 17 minutes@1024 sps + * till PAC1934 accumulation registers starts to saturate + */ +#define PAC1934_MAX_RFSH_LIMIT_MS 60000 +/* 50msec is the timeout for validity of the cached registers */ +#define PAC1934_MIN_POLLING_TIME_MS 50 +/* + * 1000usec is the minimum wait time for normal conversions when sample + * rate doesn't change + */ +#define PAC1934_MIN_UPDATE_WAIT_TIME_US 1000 + +/* 32000mV */ +#define PAC1934_VOLTAGE_MILLIVOLTS_MAX 32000 +/* voltage bits resolution when set for unsigned values */ +#define PAC1934_VOLTAGE_U_RES 16 +/* voltage bits resolution when set for signed values */ +#define PAC1934_VOLTAGE_S_RES 15 + +/* + * max signed value that can be stored on 32 bits and 8 digits fractional value + * (2^31 - 1) * 10^8 + 99999999 + */ +#define PAC_193X_MAX_POWER_ACC 214748364799999999LL +/* + * min signed value that can be stored on 32 bits and 8 digits fractional value + * -(2^31) * 10^8 - 99999999 + */ +#define PAC_193X_MIN_POWER_ACC -214748364899999999LL + +#define PAC1934_MAX_NUM_CHANNELS 4 + +#define PAC1934_MEAS_REG_LEN 76 +#define PAC1934_CTRL_REG_LEN 12 + +#define PAC1934_DEFAULT_CHIP_SAMP_SPEED_HZ 1024 + +/* I2C address map */ +#define PAC1934_REFRESH_REG_ADDR 0x00 +#define PAC1934_CTRL_REG_ADDR 0x01 +#define PAC1934_ACC_COUNT_REG_ADDR 0x02 +#define PAC1934_VPOWER_ACC_1_ADDR 0x03 +#define PAC1934_VPOWER_ACC_2_ADDR 0x04 +#define PAC1934_VPOWER_ACC_3_ADDR 0x05 +#define PAC1934_VPOWER_ACC_4_ADDR 0x06 +#define PAC1934_VBUS_1_ADDR 0x07 +#define PAC1934_VBUS_2_ADDR 0x08 +#define PAC1934_VBUS_3_ADDR 0x09 +#define PAC1934_VBUS_4_ADDR 0x0A +#define PAC1934_VSENSE_1_ADDR 0x0B +#define PAC1934_VSENSE_2_ADDR 0x0C +#define PAC1934_VSENSE_3_ADDR 0x0D +#define PAC1934_VSENSE_4_ADDR 0x0E +#define PAC1934_VBUS_AVG_1_ADDR 0x0F +#define PAC1934_VBUS_AVG_2_ADDR 0x10 +#define PAC1934_VBUS_AVG_3_ADDR 0x11 +#define PAC1934_VBUS_AVG_4_ADDR 0x12 +#define PAC1934_VSENSE_AVG_1_ADDR 0x13 +#define PAC1934_VSENSE_AVG_2_ADDR 0x14 +#define PAC1934_VSENSE_AVG_3_ADDR 0x15 +#define PAC1934_VSENSE_AVG_4_ADDR 0x16 +#define PAC1934_VPOWER_1_ADDR 0x17 +#define PAC1934_VPOWER_2_ADDR 0x18 +#define PAC1934_VPOWER_3_ADDR 0x19 +#define PAC1934_VPOWER_4_ADDR 0x1A +#define PAC1934_REFRESH_V_REG_ADDR 0x1F +#define PAC1934_CTRL_STAT_REGS_ADDR 0x1C +#define PAC1934_PID_REG_ADDR 0xFD +#define PAC1934_MID_REG_ADDR 0xFE +#define PAC1934_RID_REG_ADDR 0xFF + +/* PRODUCT ID REGISTER + MANUFACTURER ID REGISTER + REVISION ID REGISTER */ +#define PAC1934_ID_REG_LEN 3 +#define PAC1934_PID_IDX 0 +#define PAC1934_MID_IDX 1 +#define PAC1934_RID_IDX 2 + +#define PAC1934_ACPI_GET_NAMES_AND_MOHMS_VALS 1 +#define PAC1934_ACPI_GET_UOHMS_VALS 2 +#define PAC1934_ACPI_GET_BIPOLAR_SETTINGS 4 +#define PAC1934_ACPI_GET_SAMP 5 + +#define PAC1934_SAMPLE_RATE_SHIFT 6 + +#define PAC1934_VBUS_SENSE_REG_LEN 2 +#define PAC1934_ACC_REG_LEN 3 +#define PAC1934_VPOWER_REG_LEN 4 +#define PAC1934_VPOWER_ACC_REG_LEN 6 +#define PAC1934_MAX_REGISTER_LENGTH 6 + +#define PAC1934_CUSTOM_ATTR_FOR_CHANNEL 1 + +/* + * relative offsets when using multi-byte reads/writes even though these + * bytes are read one after the other, they are not at adjacent memory + * locations within the I2C memory map. The chip can skip some addresses + */ +#define PAC1934_CHANNEL_DIS_REG_OFF 0 +#define PAC1934_NEG_PWR_REG_OFF 1 + +/* + * when reading/writing multiple bytes from offset PAC1934_CHANNEL_DIS_REG_OFF, + * the chip jumps over the 0x1E (REFRESH_G) and 0x1F (REFRESH_V) offsets + */ +#define PAC1934_SLOW_REG_OFF 2 +#define PAC1934_CTRL_ACT_REG_OFF 3 +#define PAC1934_CHANNEL_DIS_ACT_REG_OFF 4 +#define PAC1934_NEG_PWR_ACT_REG_OFF 5 +#define PAC1934_CTRL_LAT_REG_OFF 6 +#define PAC1934_CHANNEL_DIS_LAT_REG_OFF 7 +#define PAC1934_NEG_PWR_LAT_REG_OFF 8 +#define PAC1934_PID_REG_OFF 9 +#define PAC1934_MID_REG_OFF 10 +#define PAC1934_REV_REG_OFF 11 +#define PAC1934_CTRL_STATUS_INFO_LEN 12 + +#define PAC1934_MID 0x5D +#define PAC1931_PID 0x58 +#define PAC1932_PID 0x59 +#define PAC1933_PID 0x5A +#define PAC1934_PID 0x5B + +/* Scale constant = (10^3 * 3.2 * 10^9 / 2^28) for mili Watt-second */ +#define PAC1934_SCALE_CONSTANT 11921 + +#define PAC1934_MAX_VPOWER_RSHIFTED_BY_28B 11921 +#define PAC1934_MAX_VSENSE_RSHIFTED_BY_16B 1525 + +#define PAC1934_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr) + +#define PAC1934_CRTL_SAMPLE_RATE_MASK GENMASK(7, 6) +#define PAC1934_CHAN_SLEEP_MASK BIT(5) +#define PAC1934_CHAN_SLEEP_SET BIT(5) +#define PAC1934_CHAN_SINGLE_MASK BIT(4) +#define PAC1934_CHAN_SINGLE_SHOT_SET BIT(4) +#define PAC1934_CHAN_ALERT_MASK BIT(3) +#define PAC1934_CHAN_ALERT_EN BIT(3) +#define PAC1934_CHAN_ALERT_CC_MASK BIT(2) +#define PAC1934_CHAN_ALERT_CC_EN BIT(2) +#define PAC1934_CHAN_OVF_ALERT_MASK BIT(1) +#define PAC1934_CHAN_OVF_ALERT_EN BIT(1) +#define PAC1934_CHAN_OVF_MASK BIT(0) + +#define PAC1934_CHAN_DIS_CH1_OFF_MASK BIT(7) +#define PAC1934_CHAN_DIS_CH2_OFF_MASK BIT(6) +#define PAC1934_CHAN_DIS_CH3_OFF_MASK BIT(5) +#define PAC1934_CHAN_DIS_CH4_OFF_MASK BIT(4) +#define PAC1934_SMBUS_TIMEOUT_MASK BIT(3) +#define PAC1934_SMBUS_BYTECOUNT_MASK BIT(2) +#define PAC1934_SMBUS_NO_SKIP_MASK BIT(1) + +#define PAC1934_NEG_PWR_CH1_BIDI_MASK BIT(7) +#define PAC1934_NEG_PWR_CH2_BIDI_MASK BIT(6) +#define PAC1934_NEG_PWR_CH3_BIDI_MASK BIT(5) +#define PAC1934_NEG_PWR_CH4_BIDI_MASK BIT(4) +#define PAC1934_NEG_PWR_CH1_BIDV_MASK BIT(3) +#define PAC1934_NEG_PWR_CH2_BIDV_MASK BIT(2) +#define PAC1934_NEG_PWR_CH3_BIDV_MASK BIT(1) +#define PAC1934_NEG_PWR_CH4_BIDV_MASK BIT(0) + +/* + * Universal Unique Identifier (UUID), + * 033771E0-1705-47B4-9535-D1BBE14D9A09, + * is reserved to Microchip for the PAC1934. + */ +#define PAC1934_DSM_UUID "033771E0-1705-47B4-9535-D1BBE14D9A09" + +enum pac1934_ids { + PAC1931, + PAC1932, + PAC1933, + PAC1934 +}; + +enum pac1934_samps { + PAC1934_SAMP_1024SPS, + PAC1934_SAMP_256SPS, + PAC1934_SAMP_64SPS, + PAC1934_SAMP_8SPS +}; + +/* + * these indexes are exactly describing the element order within a single + * PAC1934 phys channel IIO channel descriptor; see the static const struct + * iio_chan_spec pac1934_single_channel[] declaration + */ +enum pac1934_ch_idx { + PAC1934_CH_ENERGY, + PAC1934_CH_POWER, + PAC1934_CH_VOLTAGE, + PAC1934_CH_CURRENT, + PAC1934_CH_VOLTAGE_AVERAGE, + PAC1934_CH_CURRENT_AVERAGE +}; + +/** + * struct pac1934_features - features of a pac1934 instance + * @phys_channels: number of physical channels supported by the chip + * @name: chip's name + */ +struct pac1934_features { + u8 phys_channels; + const char *name; +}; + +struct samp_rate_mapping { + u16 samp_rate; + u8 shift2value; +}; + +static const unsigned int samp_rate_map_tbl[] = { + [PAC1934_SAMP_1024SPS] = 1024, + [PAC1934_SAMP_256SPS] = 256, + [PAC1934_SAMP_64SPS] = 64, + [PAC1934_SAMP_8SPS] = 8, +}; + +static const struct pac1934_features pac1934_chip_config[] = { + [PAC1931] = { + .phys_channels = 1, + .name = "pac1931", + }, + [PAC1932] = { + .phys_channels = 2, + .name = "pac1932", + }, + [PAC1933] = { + .phys_channels = 3, + .name = "pac1933", + }, + [PAC1934] = { + .phys_channels = 4, + .name = "pac1934", + }, +}; + +/** + * struct reg_data - data from the registers + * @meas_regs: snapshot of raw measurements registers + * @ctrl_regs: snapshot of control registers + * @energy_sec_acc: snapshot of energy values + * @vpower_acc: accumulated vpower values + * @vpower: snapshot of vpower registers + * @vbus: snapshot of vbus registers + * @vbus_avg: averages of vbus registers + * @vsense: snapshot of vsense registers + * @vsense_avg: averages of vsense registers + * @num_enabled_channels: count of how many chip channels are currently enabled + */ +struct reg_data { + u8 meas_regs[PAC1934_MEAS_REG_LEN]; + u8 ctrl_regs[PAC1934_CTRL_REG_LEN]; + s64 energy_sec_acc[PAC1934_MAX_NUM_CHANNELS]; + s64 vpower_acc[PAC1934_MAX_NUM_CHANNELS]; + s32 vpower[PAC1934_MAX_NUM_CHANNELS]; + s32 vbus[PAC1934_MAX_NUM_CHANNELS]; + s32 vbus_avg[PAC1934_MAX_NUM_CHANNELS]; + s32 vsense[PAC1934_MAX_NUM_CHANNELS]; + s32 vsense_avg[PAC1934_MAX_NUM_CHANNELS]; + u8 num_enabled_channels; +}; + +/** + * struct pac1934_chip_info - information about the chip + * @client: the i2c-client attached to the device + * @lock: synchronize access to driver's state members + * @work_chip_rfsh: work queue used for refresh commands + * @phys_channels: phys channels count + * @active_channels: array of values, true means that channel is active + * @enable_energy: array of values, true means that channel energy is measured + * @bi_dir: array of bools, true means that channel is bidirectional + * @chip_variant: chip variant + * @chip_revision: chip revision + * @shunts: shunts + * @chip_reg_data: chip reg data + * @sample_rate_value: sampling frequency + * @labels: table with channels labels + * @iio_info: iio_info + * @tstamp: chip's uptime + */ +struct pac1934_chip_info { + struct i2c_client *client; + struct mutex lock; /* synchronize access to driver's state members */ + struct delayed_work work_chip_rfsh; + u8 phys_channels; + bool active_channels[PAC1934_MAX_NUM_CHANNELS]; + bool enable_energy[PAC1934_MAX_NUM_CHANNELS]; + bool bi_dir[PAC1934_MAX_NUM_CHANNELS]; + u8 chip_variant; + u8 chip_revision; + u32 shunts[PAC1934_MAX_NUM_CHANNELS]; + struct reg_data chip_reg_data; + s32 sample_rate_value; + char *labels[PAC1934_MAX_NUM_CHANNELS]; + struct iio_info iio_info; + unsigned long tstamp; +}; + +#define TO_PAC1934_CHIP_INFO(d) container_of(d, struct pac1934_chip_info, work_chip_rfsh) + +#define PAC1934_VPOWER_ACC_CHANNEL(_index, _si, _address) { \ + .type = IIO_ENERGY, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_ENABLE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 48, \ + .storagebits = 64, \ + .endianness = IIO_CPU, \ + } \ +} + +#define PAC1934_VBUS_CHANNEL(_index, _si, _address) { \ + .type = IIO_VOLTAGE, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + } \ +} + +#define PAC1934_VBUS_AVG_CHANNEL(_index, _si, _address) { \ + .type = IIO_VOLTAGE, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + } \ +} + +#define PAC1934_VSENSE_CHANNEL(_index, _si, _address) { \ + .type = IIO_CURRENT, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + } \ +} + +#define PAC1934_VSENSE_AVG_CHANNEL(_index, _si, _address) { \ + .type = IIO_CURRENT, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + } \ +} + +#define PAC1934_VPOWER_CHANNEL(_index, _si, _address) { \ + .type = IIO_POWER, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 28, \ + .storagebits = 32, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + } \ +} + +static const struct iio_chan_spec pac1934_single_channel[] = { + PAC1934_VPOWER_ACC_CHANNEL(0, 0, PAC1934_VPOWER_ACC_1_ADDR), + PAC1934_VPOWER_CHANNEL(0, 0, PAC1934_VPOWER_1_ADDR), + PAC1934_VBUS_CHANNEL(0, 0, PAC1934_VBUS_1_ADDR), + PAC1934_VSENSE_CHANNEL(0, 0, PAC1934_VSENSE_1_ADDR), + PAC1934_VBUS_AVG_CHANNEL(0, 0, PAC1934_VBUS_AVG_1_ADDR), + PAC1934_VSENSE_AVG_CHANNEL(0, 0, PAC1934_VSENSE_AVG_1_ADDR), +}; + +/* Low-level I2c functions used to transfer up to 76 bytes at once */ +static int pac1934_i2c_read(struct i2c_client *client, u8 reg_addr, + void *databuf, u8 len) +{ + int ret; + struct i2c_msg msgs[2] = { + { + .addr = client->addr, + .len = 1, + .buf = (u8 *)®_addr, + }, + { + .addr = client->addr, + .len = len, + .buf = databuf, + .flags = I2C_M_RD + } + }; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + + return 0; +} + +static int pac1934_get_samp_rate_idx(struct pac1934_chip_info *info, + u32 new_samp_rate) +{ + int cnt; + + for (cnt = 0; cnt < ARRAY_SIZE(samp_rate_map_tbl); cnt++) + if (new_samp_rate == samp_rate_map_tbl[cnt]) + return cnt; + + /* not a valid sample rate value */ + return -EINVAL; +} + +static ssize_t pac1934_shunt_value_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct pac1934_chip_info *info = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + + return sysfs_emit(buf, "%u\n", info->shunts[this_attr->address]); +} + +static ssize_t pac1934_shunt_value_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct pac1934_chip_info *info = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + int sh_val; + + if (kstrtouint(buf, 10, &sh_val)) { + dev_err(dev, "Shunt value is not valid\n"); + return -EINVAL; + } + + scoped_guard(mutex, &info->lock) + info->shunts[this_attr->address] = sh_val; + + return count; +} + +static int pac1934_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, + const int **vals, int *type, int *length, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *type = IIO_VAL_INT; + *vals = samp_rate_map_tbl; + *length = ARRAY_SIZE(samp_rate_map_tbl); + return IIO_AVAIL_LIST; + } + + return -EINVAL; +} + +static int pac1934_send_refresh(struct pac1934_chip_info *info, + u8 refresh_cmd, u32 wait_time) +{ + /* this function only sends REFRESH or REFRESH_V */ + struct i2c_client *client = info->client; + int ret; + u8 bidir_reg; + bool revision_bug = false; + + if (info->chip_revision == 2 || info->chip_revision == 3) { + /* + * chip rev 2 and 3 bug workaround + * see: PAC1934 Family Data Sheet Errata DS80000836A.pdf + */ + revision_bug = true; + + bidir_reg = + FIELD_PREP(PAC1934_NEG_PWR_CH1_BIDI_MASK, info->bi_dir[0]) | + FIELD_PREP(PAC1934_NEG_PWR_CH2_BIDI_MASK, info->bi_dir[1]) | + FIELD_PREP(PAC1934_NEG_PWR_CH3_BIDI_MASK, info->bi_dir[2]) | + FIELD_PREP(PAC1934_NEG_PWR_CH4_BIDI_MASK, info->bi_dir[3]) | + FIELD_PREP(PAC1934_NEG_PWR_CH1_BIDV_MASK, info->bi_dir[0]) | + FIELD_PREP(PAC1934_NEG_PWR_CH2_BIDV_MASK, info->bi_dir[1]) | + FIELD_PREP(PAC1934_NEG_PWR_CH3_BIDV_MASK, info->bi_dir[2]) | + FIELD_PREP(PAC1934_NEG_PWR_CH4_BIDV_MASK, info->bi_dir[3]); + + ret = i2c_smbus_write_byte_data(client, + PAC1934_CTRL_STAT_REGS_ADDR + + PAC1934_NEG_PWR_REG_OFF, + bidir_reg); + if (ret) + return ret; + } + + ret = i2c_smbus_write_byte(client, refresh_cmd); + if (ret) { + dev_err(&client->dev, "%s - cannot send 0x%02X\n", + __func__, refresh_cmd); + return ret; + } + + if (revision_bug) { + /* + * chip rev 2 and 3 bug workaround - write again the same + * register write the updated registers back + */ + ret = i2c_smbus_write_byte_data(client, + PAC1934_CTRL_STAT_REGS_ADDR + + PAC1934_NEG_PWR_REG_OFF, bidir_reg); + if (ret) + return ret; + } + + /* register data retrieval timestamp */ + info->tstamp = jiffies; + + /* wait till the data is available */ + usleep_range(wait_time, wait_time + 100); + + return ret; +} + +static int pac1934_reg_snapshot(struct pac1934_chip_info *info, + bool do_refresh, u8 refresh_cmd, u32 wait_time) +{ + int ret; + struct i2c_client *client = info->client; + u8 samp_shift, ctrl_regs_tmp; + u8 *offset_reg_data_p; + u16 tmp_value; + u32 samp_rate, cnt, tmp; + s64 curr_energy, inc; + u64 tmp_energy; + struct reg_data *reg_data; + + guard(mutex)(&info->lock); + + if (do_refresh) { + ret = pac1934_send_refresh(info, refresh_cmd, wait_time); + if (ret < 0) { + dev_err(&client->dev, + "%s - cannot send refresh\n", + __func__); + return ret; + } + } + + ret = i2c_smbus_read_i2c_block_data(client, PAC1934_CTRL_STAT_REGS_ADDR, + PAC1934_CTRL_REG_LEN, + (u8 *)info->chip_reg_data.ctrl_regs); + if (ret < 0) { + dev_err(&client->dev, + "%s - cannot read ctrl/status registers\n", + __func__); + return ret; + } + + reg_data = &info->chip_reg_data; + + /* read the data registers */ + ret = pac1934_i2c_read(client, PAC1934_ACC_COUNT_REG_ADDR, + (u8 *)reg_data->meas_regs, PAC1934_MEAS_REG_LEN); + if (ret) { + dev_err(&client->dev, + "%s - cannot read ACC_COUNT register: %d:%d\n", + __func__, ret, PAC1934_MEAS_REG_LEN); + return ret; + } + + /* see how much shift is required by the sample rate */ + samp_rate = samp_rate_map_tbl[((reg_data->ctrl_regs[PAC1934_CTRL_LAT_REG_OFF]) >> 6)]; + samp_shift = get_count_order(samp_rate); + + ctrl_regs_tmp = reg_data->ctrl_regs[PAC1934_CHANNEL_DIS_LAT_REG_OFF]; + offset_reg_data_p = ®_data->meas_regs[PAC1934_ACC_REG_LEN]; + + /* start with VPOWER_ACC */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + /* check if the channel is active, skip all fields if disabled */ + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + /* skip if the energy accumulation is disabled */ + if (info->enable_energy[cnt]) { + curr_energy = info->chip_reg_data.energy_sec_acc[cnt]; + + tmp_energy = get_unaligned_be48(offset_reg_data_p); + + if (info->bi_dir[cnt]) + reg_data->vpower_acc[cnt] = sign_extend64(tmp_energy, 47); + else + reg_data->vpower_acc[cnt] = tmp_energy; + + /* + * compute the scaled to 1 second accumulated energy value; + * energy accumulator scaled to 1sec = VPOWER_ACC/2^samp_shift + * the chip's sampling rate is 2^samp_shift samples/sec + */ + inc = (reg_data->vpower_acc[cnt] >> samp_shift); + + /* add the power_acc field */ + curr_energy += inc; + + clamp(curr_energy, PAC_193X_MIN_POWER_ACC, PAC_193X_MAX_POWER_ACC); + + reg_data->energy_sec_acc[cnt] = curr_energy; + } + + offset_reg_data_p += PAC1934_VPOWER_ACC_REG_LEN; + } + + /* continue with VBUS */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + tmp_value = get_unaligned_be16(offset_reg_data_p); + + if (info->bi_dir[cnt]) + reg_data->vbus[cnt] = sign_extend32((u32)(tmp_value), 15); + else + reg_data->vbus[cnt] = tmp_value; + + offset_reg_data_p += PAC1934_VBUS_SENSE_REG_LEN; + } + + /* VSENSE */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + tmp_value = get_unaligned_be16(offset_reg_data_p); + + if (info->bi_dir[cnt]) + reg_data->vsense[cnt] = sign_extend32((u32)(tmp_value), 15); + else + reg_data->vsense[cnt] = tmp_value; + + offset_reg_data_p += PAC1934_VBUS_SENSE_REG_LEN; + } + + /* VBUS_AVG */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + tmp_value = get_unaligned_be16(offset_reg_data_p); + + if (info->bi_dir[cnt]) + reg_data->vbus_avg[cnt] = sign_extend32((u32)(tmp_value), 15); + else + reg_data->vbus_avg[cnt] = tmp_value; + + offset_reg_data_p += PAC1934_VBUS_SENSE_REG_LEN; + } + + /* VSENSE_AVG */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + tmp_value = get_unaligned_be16(offset_reg_data_p); + + if (info->bi_dir[cnt]) + reg_data->vsense_avg[cnt] = sign_extend32((u32)(tmp_value), 15); + else + reg_data->vsense_avg[cnt] = tmp_value; + + offset_reg_data_p += PAC1934_VBUS_SENSE_REG_LEN; + } + + /* VPOWER */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + tmp = get_unaligned_be32(offset_reg_data_p) >> 4; + + if (info->bi_dir[cnt]) + reg_data->vpower[cnt] = sign_extend32(tmp, 27); + else + reg_data->vpower[cnt] = tmp; + + offset_reg_data_p += PAC1934_VPOWER_REG_LEN; + } + + return 0; +} + +static int pac1934_retrieve_data(struct pac1934_chip_info *info, + u32 wait_time) +{ + int ret = 0; + + /* + * check if the minimal elapsed time has passed and if so, + * re-read the chip, otherwise the cached info is just fine + */ + if (time_after(jiffies, info->tstamp + msecs_to_jiffies(PAC1934_MIN_POLLING_TIME_MS))) { + ret = pac1934_reg_snapshot(info, true, PAC1934_REFRESH_REG_ADDR, + wait_time); + + /* + * Re-schedule the work for the read registers on timeout + * (to prevent chip registers saturation) + */ + mod_delayed_work(system_wq, &info->work_chip_rfsh, + msecs_to_jiffies(PAC1934_MAX_RFSH_LIMIT_MS)); + } + + return ret; +} + +static int pac1934_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct pac1934_chip_info *info = iio_priv(indio_dev); + s64 curr_energy; + int ret, channel = chan->channel - 1; + + ret = pac1934_retrieve_data(info, PAC1934_MIN_UPDATE_WAIT_TIME_US); + if (ret < 0) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_VOLTAGE: + *val = info->chip_reg_data.vbus[channel]; + return IIO_VAL_INT; + case IIO_CURRENT: + *val = info->chip_reg_data.vsense[channel]; + return IIO_VAL_INT; + case IIO_POWER: + *val = info->chip_reg_data.vpower[channel]; + return IIO_VAL_INT; + case IIO_ENERGY: + curr_energy = info->chip_reg_data.energy_sec_acc[channel]; + *val = (u32)curr_energy; + *val2 = (u32)(curr_energy >> 32); + return IIO_VAL_INT_64; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_AVERAGE_RAW: + switch (chan->type) { + case IIO_VOLTAGE: + *val = info->chip_reg_data.vbus_avg[channel]; + return IIO_VAL_INT; + case IIO_CURRENT: + *val = info->chip_reg_data.vsense_avg[channel]; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->address) { + /* Voltages - scale for millivolts */ + case PAC1934_VBUS_1_ADDR: + case PAC1934_VBUS_2_ADDR: + case PAC1934_VBUS_3_ADDR: + case PAC1934_VBUS_4_ADDR: + case PAC1934_VBUS_AVG_1_ADDR: + case PAC1934_VBUS_AVG_2_ADDR: + case PAC1934_VBUS_AVG_3_ADDR: + case PAC1934_VBUS_AVG_4_ADDR: + *val = PAC1934_VOLTAGE_MILLIVOLTS_MAX; + if (chan->scan_type.sign == 'u') + *val2 = PAC1934_VOLTAGE_U_RES; + else + *val2 = PAC1934_VOLTAGE_S_RES; + return IIO_VAL_FRACTIONAL_LOG2; + /* + * Currents - scale for mA - depends on the + * channel's shunt value + * (100mV * 1000000) / (2^16 * shunt(uohm)) + */ + case PAC1934_VSENSE_1_ADDR: + case PAC1934_VSENSE_2_ADDR: + case PAC1934_VSENSE_3_ADDR: + case PAC1934_VSENSE_4_ADDR: + case PAC1934_VSENSE_AVG_1_ADDR: + case PAC1934_VSENSE_AVG_2_ADDR: + case PAC1934_VSENSE_AVG_3_ADDR: + case PAC1934_VSENSE_AVG_4_ADDR: + *val = PAC1934_MAX_VSENSE_RSHIFTED_BY_16B; + if (chan->scan_type.sign == 'u') + *val2 = info->shunts[channel]; + else + *val2 = info->shunts[channel] >> 1; + return IIO_VAL_FRACTIONAL; + /* + * Power - uW - it will use the combined scale + * for current and voltage + * current(mA) * voltage(mV) = power (uW) + */ + case PAC1934_VPOWER_1_ADDR: + case PAC1934_VPOWER_2_ADDR: + case PAC1934_VPOWER_3_ADDR: + case PAC1934_VPOWER_4_ADDR: + *val = PAC1934_MAX_VPOWER_RSHIFTED_BY_28B; + if (chan->scan_type.sign == 'u') + *val2 = info->shunts[channel]; + else + *val2 = info->shunts[channel] >> 1; + return IIO_VAL_FRACTIONAL; + case PAC1934_VPOWER_ACC_1_ADDR: + case PAC1934_VPOWER_ACC_2_ADDR: + case PAC1934_VPOWER_ACC_3_ADDR: + case PAC1934_VPOWER_ACC_4_ADDR: + /* + * expresses the 32 bit scale value here compute + * the scale for energy (miliWatt-second or miliJoule) + */ + *val = PAC1934_SCALE_CONSTANT; + + if (chan->scan_type.sign == 'u') + *val2 = info->shunts[channel]; + else + *val2 = info->shunts[channel] >> 1; + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SAMP_FREQ: + *val = info->sample_rate_value; + return IIO_VAL_INT; + case IIO_CHAN_INFO_ENABLE: + *val = info->enable_energy[channel]; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int pac1934_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct pac1934_chip_info *info = iio_priv(indio_dev); + struct i2c_client *client = info->client; + int ret = -EINVAL; + s32 old_samp_rate; + u8 ctrl_reg; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = pac1934_get_samp_rate_idx(info, val); + if (ret < 0) + return ret; + + /* write the new sampling value and trigger a snapshot(incl refresh) */ + scoped_guard(mutex, &info->lock) { + ctrl_reg = FIELD_PREP(PAC1934_CRTL_SAMPLE_RATE_MASK, ret); + ret = i2c_smbus_write_byte_data(client, PAC1934_CTRL_REG_ADDR, ctrl_reg); + if (ret) { + dev_err(&client->dev, + "%s - can't update sample rate\n", + __func__); + return ret; + } + } + + old_samp_rate = info->sample_rate_value; + info->sample_rate_value = val; + + /* + * now, force a snapshot with refresh - call retrieve + * data in order to update the refresh timer + * alter the timestamp in order to force trigger a + * register snapshot and a timestamp update + */ + info->tstamp -= msecs_to_jiffies(PAC1934_MIN_POLLING_TIME_MS); + ret = pac1934_retrieve_data(info, (1024 / old_samp_rate) * 1000); + if (ret < 0) { + dev_err(&client->dev, + "%s - cannot snapshot ctrl and measurement regs\n", + __func__); + return ret; + } + + return 0; + case IIO_CHAN_INFO_ENABLE: + scoped_guard(mutex, &info->lock) { + info->enable_energy[chan->channel - 1] = val ? true : false; + if (!val) + info->chip_reg_data.energy_sec_acc[chan->channel - 1] = 0; + } + + return 0; + default: + return -EINVAL; + } +} + +static int pac1934_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, char *label) +{ + struct pac1934_chip_info *info = iio_priv(indio_dev); + + switch (chan->address) { + case PAC1934_VBUS_1_ADDR: + case PAC1934_VBUS_2_ADDR: + case PAC1934_VBUS_3_ADDR: + case PAC1934_VBUS_4_ADDR: + return sysfs_emit(label, "%s_VBUS_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + case PAC1934_VBUS_AVG_1_ADDR: + case PAC1934_VBUS_AVG_2_ADDR: + case PAC1934_VBUS_AVG_3_ADDR: + case PAC1934_VBUS_AVG_4_ADDR: + return sysfs_emit(label, "%s_VBUS_AVG_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + case PAC1934_VSENSE_1_ADDR: + case PAC1934_VSENSE_2_ADDR: + case PAC1934_VSENSE_3_ADDR: + case PAC1934_VSENSE_4_ADDR: + return sysfs_emit(label, "%s_IBUS_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + case PAC1934_VSENSE_AVG_1_ADDR: + case PAC1934_VSENSE_AVG_2_ADDR: + case PAC1934_VSENSE_AVG_3_ADDR: + case PAC1934_VSENSE_AVG_4_ADDR: + return sysfs_emit(label, "%s_IBUS_AVG_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + case PAC1934_VPOWER_1_ADDR: + case PAC1934_VPOWER_2_ADDR: + case PAC1934_VPOWER_3_ADDR: + case PAC1934_VPOWER_4_ADDR: + return sysfs_emit(label, "%s_POWER_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + case PAC1934_VPOWER_ACC_1_ADDR: + case PAC1934_VPOWER_ACC_2_ADDR: + case PAC1934_VPOWER_ACC_3_ADDR: + case PAC1934_VPOWER_ACC_4_ADDR: + return sysfs_emit(label, "%s_ENERGY_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + } + + return 0; +} + +static void pac1934_work_periodic_rfsh(struct work_struct *work) +{ + struct pac1934_chip_info *info = TO_PAC1934_CHIP_INFO((struct delayed_work *)work); + struct device *dev = &info->client->dev; + + dev_dbg(dev, "%s - Periodic refresh\n", __func__); + + /* do a REFRESH, then read */ + pac1934_reg_snapshot(info, true, PAC1934_REFRESH_REG_ADDR, + PAC1934_MIN_UPDATE_WAIT_TIME_US); + + schedule_delayed_work(&info->work_chip_rfsh, + msecs_to_jiffies(PAC1934_MAX_RFSH_LIMIT_MS)); +} + +static int pac1934_read_revision(struct pac1934_chip_info *info, u8 *buf) +{ + int ret; + struct i2c_client *client = info->client; + + ret = i2c_smbus_read_i2c_block_data(client, PAC1934_PID_REG_ADDR, + PAC1934_ID_REG_LEN, + buf); + if (ret < 0) { + dev_err(&client->dev, "cannot read revision\n"); + return ret; + } + + return 0; +} + +static int pac1934_chip_identify(struct pac1934_chip_info *info) +{ + u8 rev_info[PAC1934_ID_REG_LEN]; + struct device *dev = &info->client->dev; + int ret = 0; + + ret = pac1934_read_revision(info, (u8 *)rev_info); + if (ret) + return ret; + + info->chip_variant = rev_info[PAC1934_PID_IDX]; + info->chip_revision = rev_info[PAC1934_RID_IDX]; + + dev_dbg(dev, "Chip variant: 0x%02X\n", info->chip_variant); + dev_dbg(dev, "Chip revision: 0x%02X\n", info->chip_revision); + + switch (info->chip_variant) { + case PAC1934_PID: + return PAC1934; + case PAC1933_PID: + return PAC1933; + case PAC1932_PID: + return PAC1932; + case PAC1931_PID: + return PAC1931; + default: + return -EINVAL; + } +} + +/* + * documentation related to the ACPI device definition + * https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ApplicationNotes/ApplicationNotes/PAC1934-Integration-Notes-for-Microsoft-Windows-10-and-Windows-11-Driver-Support-DS00002534.pdf + */ +static bool pac1934_acpi_parse_channel_config(struct i2c_client *client, + struct pac1934_chip_info *info) +{ + acpi_handle handle; + union acpi_object *rez; + struct device *dev = &client->dev; + unsigned short bi_dir_mask; + int idx, i; + guid_t guid; + + handle = ACPI_HANDLE(dev); + + guid_parse(PAC1934_DSM_UUID, &guid); + + rez = acpi_evaluate_dsm(handle, &guid, 0, PAC1934_ACPI_GET_NAMES_AND_MOHMS_VALS, NULL); + if (!rez) + return false; + + for (i = 0; i < rez->package.count; i += 2) { + idx = i / 2; + info->labels[idx] = + devm_kmemdup(dev, rez->package.elements[i].string.pointer, + (size_t)rez->package.elements[i].string.length + 1, + GFP_KERNEL); + info->labels[idx][rez->package.elements[i].string.length] = '\0'; + info->shunts[idx] = rez->package.elements[i + 1].integer.value * 1000; + info->active_channels[idx] = (info->shunts[idx] != 0); + } + + ACPI_FREE(rez); + + rez = acpi_evaluate_dsm(handle, &guid, 1, PAC1934_ACPI_GET_UOHMS_VALS, NULL); + if (!rez) { + /* + * initializing with default values + * we assume all channels are unidirectional(the mask is zero) + * and assign the default sampling rate + */ + info->sample_rate_value = PAC1934_DEFAULT_CHIP_SAMP_SPEED_HZ; + return true; + } + + for (i = 0; i < rez->package.count; i++) { + idx = i; + info->shunts[idx] = rez->package.elements[i].integer.value; + info->active_channels[idx] = (info->shunts[idx] != 0); + } + + ACPI_FREE(rez); + + rez = acpi_evaluate_dsm(handle, &guid, 1, PAC1934_ACPI_GET_BIPOLAR_SETTINGS, NULL); + if (!rez) + return false; + + bi_dir_mask = rez->package.elements[0].integer.value; + info->bi_dir[0] = ((bi_dir_mask & (1 << 3)) | (bi_dir_mask & (1 << 7))) != 0; + info->bi_dir[1] = ((bi_dir_mask & (1 << 2)) | (bi_dir_mask & (1 << 6))) != 0; + info->bi_dir[2] = ((bi_dir_mask & (1 << 1)) | (bi_dir_mask & (1 << 5))) != 0; + info->bi_dir[3] = ((bi_dir_mask & (1 << 0)) | (bi_dir_mask & (1 << 4))) != 0; + + ACPI_FREE(rez); + + rez = acpi_evaluate_dsm(handle, &guid, 1, PAC1934_ACPI_GET_SAMP, NULL); + if (!rez) + return false; + + info->sample_rate_value = rez->package.elements[0].integer.value; + + ACPI_FREE(rez); + + return true; +} + +static bool pac1934_of_parse_channel_config(struct i2c_client *client, + struct pac1934_chip_info *info) +{ + struct fwnode_handle *node, *fwnode; + struct device *dev = &client->dev; + unsigned int current_channel; + int idx, ret; + + info->sample_rate_value = 1024; + current_channel = 1; + + fwnode = dev_fwnode(dev); + fwnode_for_each_available_child_node(fwnode, node) { + ret = fwnode_property_read_u32(node, "reg", &idx); + if (ret) { + dev_err_probe(dev, ret, + "reading invalid channel index\n"); + goto err_fwnode; + } + /* adjust idx to match channel index (1 to 4) from the datasheet */ + idx--; + + if (current_channel >= (info->phys_channels + 1) || + idx >= info->phys_channels || idx < 0) { + dev_err_probe(dev, -EINVAL, + "%s: invalid channel_index %d value\n", + fwnode_get_name(node), idx); + goto err_fwnode; + } + + /* enable channel */ + info->active_channels[idx] = true; + + ret = fwnode_property_read_u32(node, "shunt-resistor-micro-ohms", + &info->shunts[idx]); + if (ret) { + dev_err_probe(dev, ret, + "%s: invalid shunt-resistor value: %d\n", + fwnode_get_name(node), info->shunts[idx]); + goto err_fwnode; + } + + if (fwnode_property_present(node, "label")) { + ret = fwnode_property_read_string(node, "label", + (const char **)&info->labels[idx]); + if (ret) { + dev_err_probe(dev, ret, + "%s: invalid rail-name value\n", + fwnode_get_name(node)); + goto err_fwnode; + } + } + + info->bi_dir[idx] = fwnode_property_read_bool(node, "bipolar"); + + current_channel++; + } + + return true; + +err_fwnode: + fwnode_handle_put(node); + + return false; +} + +static void pac1934_cancel_delayed_work(void *dwork) +{ + cancel_delayed_work_sync(dwork); +} + +static int pac1934_chip_configure(struct pac1934_chip_info *info) +{ + int cnt, ret; + struct i2c_client *client = info->client; + u8 regs[PAC1934_CTRL_STATUS_INFO_LEN], idx, ctrl_reg; + u32 wait_time; + + info->chip_reg_data.num_enabled_channels = 0; + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if (info->active_channels[cnt]) + info->chip_reg_data.num_enabled_channels++; + } + + /* + * read whatever information was gathered before the driver was loaded + * establish which channels are enabled/disabled and then establish the + * information retrieval mode (using SKIP or no). + * Read the chip ID values + */ + ret = i2c_smbus_read_i2c_block_data(client, PAC1934_CTRL_STAT_REGS_ADDR, + ARRAY_SIZE(regs), + (u8 *)regs); + if (ret < 0) { + dev_err_probe(&client->dev, ret, + "%s - cannot read regs from 0x%02X\n", + __func__, PAC1934_CTRL_STAT_REGS_ADDR); + return ret; + } + + /* write the CHANNEL_DIS and the NEG_PWR registers */ + regs[PAC1934_CHANNEL_DIS_REG_OFF] = + FIELD_PREP(PAC1934_CHAN_DIS_CH1_OFF_MASK, info->active_channels[0] ? 0 : 1) | + FIELD_PREP(PAC1934_CHAN_DIS_CH2_OFF_MASK, info->active_channels[1] ? 0 : 1) | + FIELD_PREP(PAC1934_CHAN_DIS_CH3_OFF_MASK, info->active_channels[2] ? 0 : 1) | + FIELD_PREP(PAC1934_CHAN_DIS_CH4_OFF_MASK, info->active_channels[3] ? 0 : 1) | + FIELD_PREP(PAC1934_SMBUS_TIMEOUT_MASK, 0) | + FIELD_PREP(PAC1934_SMBUS_BYTECOUNT_MASK, 0) | + FIELD_PREP(PAC1934_SMBUS_NO_SKIP_MASK, 0); + + regs[PAC1934_NEG_PWR_REG_OFF] = + FIELD_PREP(PAC1934_NEG_PWR_CH1_BIDI_MASK, info->bi_dir[0]) | + FIELD_PREP(PAC1934_NEG_PWR_CH2_BIDI_MASK, info->bi_dir[1]) | + FIELD_PREP(PAC1934_NEG_PWR_CH3_BIDI_MASK, info->bi_dir[2]) | + FIELD_PREP(PAC1934_NEG_PWR_CH4_BIDI_MASK, info->bi_dir[3]) | + FIELD_PREP(PAC1934_NEG_PWR_CH1_BIDV_MASK, info->bi_dir[0]) | + FIELD_PREP(PAC1934_NEG_PWR_CH2_BIDV_MASK, info->bi_dir[1]) | + FIELD_PREP(PAC1934_NEG_PWR_CH3_BIDV_MASK, info->bi_dir[2]) | + FIELD_PREP(PAC1934_NEG_PWR_CH4_BIDV_MASK, info->bi_dir[3]); + + /* no SLOW triggered REFRESH, clear POR */ + regs[PAC1934_SLOW_REG_OFF] = 0; + + ret = i2c_smbus_write_block_data(client, PAC1934_CTRL_STAT_REGS_ADDR, + ARRAY_SIZE(regs), (u8 *)regs); + if (ret) + return ret; + + /* Default sampling rate */ + ctrl_reg = FIELD_PREP(PAC1934_CRTL_SAMPLE_RATE_MASK, PAC1934_SAMP_1024SPS); + + ret = i2c_smbus_write_byte_data(client, PAC1934_CTRL_REG_ADDR, ctrl_reg); + if (ret) + return ret; + + /* + * send a REFRESH to the chip, so the new settings take place + * as well as resetting the accumulators + */ + ret = i2c_smbus_write_byte(client, PAC1934_REFRESH_REG_ADDR); + if (ret) { + dev_err(&client->dev, + "%s - cannot send 0x%02X\n", + __func__, PAC1934_REFRESH_REG_ADDR); + return ret; + } + + /* + * get the current(in the chip) sampling speed and compute the + * required timeout based on its value + * the timeout is 1/sampling_speed + */ + idx = regs[PAC1934_CTRL_ACT_REG_OFF] >> PAC1934_SAMPLE_RATE_SHIFT; + wait_time = (1024 / samp_rate_map_tbl[idx]) * 1000; + + /* + * wait the maximum amount of time to be on the safe side + * the maximum wait time is for 8sps + */ + usleep_range(wait_time, wait_time + 100); + + INIT_DELAYED_WORK(&info->work_chip_rfsh, pac1934_work_periodic_rfsh); + /* Setup the latest moment for reading the regs before saturation */ + schedule_delayed_work(&info->work_chip_rfsh, + msecs_to_jiffies(PAC1934_MAX_RFSH_LIMIT_MS)); + + return devm_add_action_or_reset(&client->dev, pac1934_cancel_delayed_work, + &info->work_chip_rfsh); +} + +static int pac1934_prep_iio_channels(struct pac1934_chip_info *info, struct iio_dev *indio_dev) +{ + struct iio_chan_spec *ch_sp; + int channel_size, attribute_count, cnt; + void *dyn_ch_struct, *tmp_data; + struct device *dev = &info->client->dev; + + /* find out dynamically how many IIO channels we need */ + attribute_count = 0; + channel_size = 0; + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if (!info->active_channels[cnt]) + continue; + + /* add the size of the properties of one chip physical channel */ + channel_size += sizeof(pac1934_single_channel); + /* count how many enabled channels we have */ + attribute_count += ARRAY_SIZE(pac1934_single_channel); + dev_dbg(dev, ":%s: Channel %d active\n", __func__, cnt + 1); + } + + dyn_ch_struct = devm_kzalloc(dev, channel_size, GFP_KERNEL); + if (!dyn_ch_struct) + return -EINVAL; + + tmp_data = dyn_ch_struct; + + /* populate the dynamic channels and make all the adjustments */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if (!info->active_channels[cnt]) + continue; + + memcpy(tmp_data, pac1934_single_channel, sizeof(pac1934_single_channel)); + ch_sp = (struct iio_chan_spec *)tmp_data; + ch_sp[PAC1934_CH_ENERGY].channel = cnt + 1; + ch_sp[PAC1934_CH_ENERGY].scan_index = cnt; + ch_sp[PAC1934_CH_ENERGY].address = cnt + PAC1934_VPOWER_ACC_1_ADDR; + ch_sp[PAC1934_CH_POWER].channel = cnt + 1; + ch_sp[PAC1934_CH_POWER].scan_index = cnt; + ch_sp[PAC1934_CH_POWER].address = cnt + PAC1934_VPOWER_1_ADDR; + ch_sp[PAC1934_CH_VOLTAGE].channel = cnt + 1; + ch_sp[PAC1934_CH_VOLTAGE].scan_index = cnt; + ch_sp[PAC1934_CH_VOLTAGE].address = cnt + PAC1934_VBUS_1_ADDR; + ch_sp[PAC1934_CH_CURRENT].channel = cnt + 1; + ch_sp[PAC1934_CH_CURRENT].scan_index = cnt; + ch_sp[PAC1934_CH_CURRENT].address = cnt + PAC1934_VSENSE_1_ADDR; + + /* + * In order to be able to use labels for PAC1934_CH_VOLTAGE, and + * PAC1934_CH_VOLTAGE_AVERAGE,respectively PAC1934_CH_CURRENT + * and PAC1934_CH_CURRENT_AVERAGE we need to use different + * channel numbers. We will add +5 (+1 to maximum PAC channels). + */ + ch_sp[PAC1934_CH_VOLTAGE_AVERAGE].channel = cnt + 5; + ch_sp[PAC1934_CH_VOLTAGE_AVERAGE].scan_index = cnt; + ch_sp[PAC1934_CH_VOLTAGE_AVERAGE].address = cnt + PAC1934_VBUS_AVG_1_ADDR; + ch_sp[PAC1934_CH_CURRENT_AVERAGE].channel = cnt + 5; + ch_sp[PAC1934_CH_CURRENT_AVERAGE].scan_index = cnt; + ch_sp[PAC1934_CH_CURRENT_AVERAGE].address = cnt + PAC1934_VSENSE_AVG_1_ADDR; + + /* + * now modify the parameters in all channels if the + * whole chip rail(channel) is bi-directional + */ + if (info->bi_dir[cnt]) { + ch_sp[PAC1934_CH_ENERGY].scan_type.sign = 's'; + ch_sp[PAC1934_CH_ENERGY].scan_type.realbits = 47; + ch_sp[PAC1934_CH_POWER].scan_type.sign = 's'; + ch_sp[PAC1934_CH_POWER].scan_type.realbits = 27; + ch_sp[PAC1934_CH_VOLTAGE].scan_type.sign = 's'; + ch_sp[PAC1934_CH_VOLTAGE].scan_type.realbits = 15; + ch_sp[PAC1934_CH_CURRENT].scan_type.sign = 's'; + ch_sp[PAC1934_CH_CURRENT].scan_type.realbits = 15; + ch_sp[PAC1934_CH_VOLTAGE_AVERAGE].scan_type.sign = 's'; + ch_sp[PAC1934_CH_VOLTAGE_AVERAGE].scan_type.realbits = 15; + ch_sp[PAC1934_CH_CURRENT_AVERAGE].scan_type.sign = 's'; + ch_sp[PAC1934_CH_CURRENT_AVERAGE].scan_type.realbits = 15; + } + tmp_data += sizeof(pac1934_single_channel); + } + + /* + * send the updated dynamic channel structure information towards IIO + * prepare the required field for IIO class registration + */ + indio_dev->num_channels = attribute_count; + indio_dev->channels = (const struct iio_chan_spec *)dyn_ch_struct; + + return 0; +} + +static IIO_DEVICE_ATTR(in_shunt_resistor1, 0644, + pac1934_shunt_value_show, pac1934_shunt_value_store, 0); +static IIO_DEVICE_ATTR(in_shunt_resistor2, 0644, + pac1934_shunt_value_show, pac1934_shunt_value_store, 1); +static IIO_DEVICE_ATTR(in_shunt_resistor3, 0644, + pac1934_shunt_value_show, pac1934_shunt_value_store, 2); +static IIO_DEVICE_ATTR(in_shunt_resistor4, 0644, + pac1934_shunt_value_show, pac1934_shunt_value_store, 3); + +static int pac1934_prep_custom_attributes(struct pac1934_chip_info *info, + struct iio_dev *indio_dev) +{ + int i, active_channels_count = 0; + struct attribute **pac1934_custom_attr; + struct attribute_group *pac1934_group; + struct device *dev = &info->client->dev; + + for (i = 0 ; i < info->phys_channels; i++) + if (info->active_channels[i]) + active_channels_count++; + + pac1934_group = devm_kzalloc(dev, sizeof(*pac1934_group), GFP_KERNEL); + if (!pac1934_group) + return -ENOMEM; + + pac1934_custom_attr = devm_kzalloc(dev, + (PAC1934_CUSTOM_ATTR_FOR_CHANNEL * + active_channels_count) + * sizeof(*pac1934_group) + 1, + GFP_KERNEL); + if (!pac1934_custom_attr) + return -ENOMEM; + + i = 0; + if (info->active_channels[0]) + pac1934_custom_attr[i++] = PAC1934_DEV_ATTR(in_shunt_resistor1); + + if (info->active_channels[1]) + pac1934_custom_attr[i++] = PAC1934_DEV_ATTR(in_shunt_resistor2); + + if (info->active_channels[2]) + pac1934_custom_attr[i++] = PAC1934_DEV_ATTR(in_shunt_resistor3); + + if (info->active_channels[3]) + pac1934_custom_attr[i] = PAC1934_DEV_ATTR(in_shunt_resistor4); + + pac1934_group->attrs = pac1934_custom_attr; + info->iio_info.attrs = pac1934_group; + + return 0; +} + +static void pac1934_mutex_destroy(void *data) +{ + struct mutex *lock = data; + + mutex_destroy(lock); +} + +static const struct iio_info pac1934_info = { + .read_raw = pac1934_read_raw, + .write_raw = pac1934_write_raw, + .read_avail = pac1934_read_avail, + .read_label = pac1934_read_label, +}; + +static int pac1934_probe(struct i2c_client *client) +{ + struct pac1934_chip_info *info; + const struct pac1934_features *chip; + struct iio_dev *indio_dev; + int cnt, ret; + bool match = false; + struct device *dev = &client->dev; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*info)); + if (!indio_dev) + return -ENOMEM; + + info = iio_priv(indio_dev); + + info->client = client; + + /* always start with energy accumulation enabled */ + for (cnt = 0; cnt < PAC1934_MAX_NUM_CHANNELS; cnt++) + info->enable_energy[cnt] = true; + + ret = pac1934_chip_identify(info); + if (ret < 0) { + /* + * If failed to identify the hardware based on internal + * registers, try using fallback compatible in device tree + * to deal with some newer part number. + */ + chip = i2c_get_match_data(client); + if (!chip) + return -EINVAL; + + info->phys_channels = chip->phys_channels; + indio_dev->name = chip->name; + } else { + info->phys_channels = pac1934_chip_config[ret].phys_channels; + indio_dev->name = pac1934_chip_config[ret].name; + } + + if (acpi_match_device(dev->driver->acpi_match_table, dev)) + match = pac1934_acpi_parse_channel_config(client, info); + else + /* + * This makes it possible to use also ACPI PRP0001 for + * registering the device using device tree properties. + */ + match = pac1934_of_parse_channel_config(client, info); + + if (!match) + return dev_err_probe(dev, -EINVAL, + "parameter parsing returned an error\n"); + + mutex_init(&info->lock); + ret = devm_add_action_or_reset(dev, pac1934_mutex_destroy, + &info->lock); + if (ret < 0) + return ret; + + /* + * do now any chip specific initialization (e.g. read/write + * some registers), enable/disable certain channels, change the sampling + * rate to the requested value + */ + ret = pac1934_chip_configure(info); + if (ret < 0) + return ret; + + /* prepare the channel information */ + ret = pac1934_prep_iio_channels(info, indio_dev); + if (ret < 0) + return ret; + + info->iio_info = pac1934_info; + indio_dev->info = &info->iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = pac1934_prep_custom_attributes(info, indio_dev); + if (ret < 0) + return dev_err_probe(dev, ret, + "Can't configure custom attributes for PAC1934 device\n"); + + /* + * read whatever has been accumulated in the chip so far + * and reset the accumulators + */ + ret = pac1934_reg_snapshot(info, true, PAC1934_REFRESH_REG_ADDR, + PAC1934_MIN_UPDATE_WAIT_TIME_US); + if (ret < 0) + return ret; + + ret = devm_iio_device_register(dev, indio_dev); + if (ret < 0) + return dev_err_probe(dev, ret, + "Can't register IIO device\n"); + + return 0; +} + +static const struct i2c_device_id pac1934_id[] = { + { .name = "pac1931", .driver_data = (kernel_ulong_t)&pac1934_chip_config[PAC1931] }, + { .name = "pac1932", .driver_data = (kernel_ulong_t)&pac1934_chip_config[PAC1932] }, + { .name = "pac1933", .driver_data = (kernel_ulong_t)&pac1934_chip_config[PAC1933] }, + { .name = "pac1934", .driver_data = (kernel_ulong_t)&pac1934_chip_config[PAC1934] }, + {} +}; +MODULE_DEVICE_TABLE(i2c, pac1934_id); + +static const struct of_device_id pac1934_of_match[] = { + { + .compatible = "microchip,pac1931", + .data = &pac1934_chip_config[PAC1931] + }, + { + .compatible = "microchip,pac1932", + .data = &pac1934_chip_config[PAC1932] + }, + { + .compatible = "microchip,pac1933", + .data = &pac1934_chip_config[PAC1933] + }, + { + .compatible = "microchip,pac1934", + .data = &pac1934_chip_config[PAC1934] + }, + {} +}; +MODULE_DEVICE_TABLE(of, pac1934_of_match); + +/* + * using MCHP1930 to be compatible with BIOS ACPI. See example: + * https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ApplicationNotes/ApplicationNotes/PAC1934-Integration-Notes-for-Microsoft-Windows-10-and-Windows-11-Driver-Support-DS00002534.pdf + */ +static const struct acpi_device_id pac1934_acpi_match[] = { + { "MCHP1930", .driver_data = (kernel_ulong_t)&pac1934_chip_config[PAC1934] }, + {} +}; +MODULE_DEVICE_TABLE(acpi, pac1934_acpi_match); + +static struct i2c_driver pac1934_driver = { + .driver = { + .name = "pac1934", + .of_match_table = pac1934_of_match, + .acpi_match_table = pac1934_acpi_match + }, + .probe = pac1934_probe, + .id_table = pac1934_id, +}; + +module_i2c_driver(pac1934_driver); + +MODULE_AUTHOR("Bogdan Bolocan <bogdan.bolocan@microchip.com>"); +MODULE_AUTHOR("Victor Tudose"); +MODULE_AUTHOR("Marius Cristea <marius.cristea@microchip.com>"); +MODULE_DESCRIPTION("IIO driver for PAC1934 Multi-Channel DC Power/Energy Monitor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c index 01c5586df56d..c9d2c66434e4 100644 --- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c @@ -372,7 +372,6 @@ static const struct xoadc_channel pm8921_xoadc_channels[] = { * @name: name of this channel * @hwchan: pointer to hardware channel information (muxing & scaling settings) * @calibration: whether to use absolute or ratiometric calibration - * @scale_fn_type: scaling function type * @decimation: 0,1,2,3 * @amux_ip_rsv: ratiometric scale value if using ratiometric * calibration: 0, 1, 2, 4, 5. diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c index dd94667a623b..bbe954a738c7 100644 --- a/drivers/iio/adc/rockchip_saradc.c +++ b/drivers/iio/adc/rockchip_saradc.c @@ -52,7 +52,7 @@ #define SARADC2_START BIT(4) #define SARADC2_SINGLE_MODE BIT(5) -#define SARADC2_CONV_CHANNELS GENMASK(15, 0) +#define SARADC2_CONV_CHANNELS GENMASK(3, 0) struct rockchip_saradc; @@ -102,12 +102,12 @@ static void rockchip_saradc_start_v2(struct rockchip_saradc *info, int chn) writel_relaxed(0xc, info->regs + SARADC_T_DAS_SOC); writel_relaxed(0x20, info->regs + SARADC_T_PD_SOC); val = FIELD_PREP(SARADC2_EN_END_INT, 1); - val |= val << 16; + val |= SARADC2_EN_END_INT << 16; writel_relaxed(val, info->regs + SARADC2_END_INT_EN); val = FIELD_PREP(SARADC2_START, 1) | FIELD_PREP(SARADC2_SINGLE_MODE, 1) | FIELD_PREP(SARADC2_CONV_CHANNELS, chn); - val |= val << 16; + val |= (SARADC2_START | SARADC2_SINGLE_MODE | SARADC2_CONV_CHANNELS) << 16; writel(val, info->regs + SARADC2_CONV_CON); } @@ -450,16 +450,11 @@ static int rockchip_saradc_probe(struct platform_device *pdev) * The reset should be an optional property, as it should work * with old devicetrees as well */ - info->reset = devm_reset_control_get_exclusive(&pdev->dev, - "saradc-apb"); + info->reset = devm_reset_control_get_optional_exclusive(&pdev->dev, + "saradc-apb"); if (IS_ERR(info->reset)) { ret = PTR_ERR(info->reset); - if (ret != -ENOENT) - return dev_err_probe(&pdev->dev, ret, - "failed to get saradc-apb\n"); - - dev_dbg(&pdev->dev, "no reset control found\n"); - info->reset = NULL; + return dev_err_probe(&pdev->dev, ret, "failed to get saradc-apb\n"); } init_completion(&info->completion); diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c index ad4cea6839b2..a5464737e527 100644 --- a/drivers/iio/adc/rtq6056.c +++ b/drivers/iio/adc/rtq6056.c @@ -39,6 +39,10 @@ #define RTQ6056_DEFAULT_CONFIG 0x4127 #define RTQ6056_CONT_ALLON 7 +#define RTQ6059_DEFAULT_CONFIG 0x3C47 +#define RTQ6059_VBUS_LSB_OFFSET 3 +#define RTQ6059_AVG_BASE 8 + enum { RTQ6056_CH_VSHUNT = 0, RTQ6056_CH_VBUS, @@ -47,19 +51,46 @@ enum { RTQ6056_MAX_CHANNEL }; +/* + * The enum is to present the 0x00 CONFIG RG bitfield for the 16bit RG value + * field value order from LSB to MSB + * RTQ6053/6 is OPMODE->VSHUNTCT->VBUSCT->AVG->RESET + * RTQ6059 is OPMODE->SADC->BADC->PGA->RESET + */ enum { F_OPMODE = 0, F_VSHUNTCT, + F_RTQ6059_SADC = F_VSHUNTCT, F_VBUSCT, + F_RTQ6059_BADC = F_VBUSCT, F_AVG, + F_RTQ6059_PGA = F_AVG, F_RESET, F_MAX_FIELDS }; +struct rtq6056_priv; + +struct richtek_dev_data { + bool fixed_samp_freq; + u8 vbus_offset; + int default_conv_time_us; + unsigned int default_config; + unsigned int calib_coefficient; + const int *avg_sample_list; + int avg_sample_list_length; + const struct reg_field *reg_fields; + const struct iio_chan_spec *channels; + int num_channels; + int (*read_scale)(struct iio_chan_spec const *ch, int *val, int *val2); + int (*set_average)(struct rtq6056_priv *priv, int val); +}; + struct rtq6056_priv { struct device *dev; struct regmap *regmap; struct regmap_field *rm_fields[F_MAX_FIELDS]; + const struct richtek_dev_data *devdata; u32 shunt_resistor_uohm; int vshuntct_us; int vbusct_us; @@ -74,6 +105,14 @@ static const struct reg_field rtq6056_reg_fields[F_MAX_FIELDS] = { [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15), }; +static const struct reg_field rtq6059_reg_fields[F_MAX_FIELDS] = { + [F_OPMODE] = REG_FIELD(RTQ6056_REG_CONFIG, 0, 2), + [F_RTQ6059_SADC] = REG_FIELD(RTQ6056_REG_CONFIG, 3, 6), + [F_RTQ6059_BADC] = REG_FIELD(RTQ6056_REG_CONFIG, 7, 10), + [F_RTQ6059_PGA] = REG_FIELD(RTQ6056_REG_CONFIG, 11, 12), + [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15), +}; + static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = { { .type = IIO_VOLTAGE, @@ -151,10 +190,93 @@ static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = { IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL), }; +/* + * Difference between RTQ6056 and RTQ6059 + * - Fixed sampling conversion time + * - Average sample numbers + * - Channel scale + * - calibration coefficient + */ +static const struct iio_chan_spec rtq6059_channels[RTQ6056_MAX_CHANNEL + 1] = { + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .address = RTQ6056_REG_SHUNTVOLT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .address = RTQ6056_REG_BUSVOLT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_POWER, + .indexed = 1, + .channel = 2, + .address = RTQ6056_REG_POWER, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 2, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_CURRENT, + .indexed = 1, + .channel = 3, + .address = RTQ6056_REG_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 3, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL), +}; + static int rtq6056_adc_read_channel(struct rtq6056_priv *priv, struct iio_chan_spec const *ch, int *val) { + const struct richtek_dev_data *devdata = priv->devdata; struct device *dev = priv->dev; unsigned int addr = ch->address; unsigned int regval; @@ -168,12 +290,21 @@ static int rtq6056_adc_read_channel(struct rtq6056_priv *priv, return ret; /* Power and VBUS is unsigned 16-bit, others are signed 16-bit */ - if (addr == RTQ6056_REG_BUSVOLT || addr == RTQ6056_REG_POWER) + switch (addr) { + case RTQ6056_REG_BUSVOLT: + regval >>= devdata->vbus_offset; *val = regval; - else + return IIO_VAL_INT; + case RTQ6056_REG_POWER: + *val = regval; + return IIO_VAL_INT; + case RTQ6056_REG_SHUNTVOLT: + case RTQ6056_REG_CURRENT: *val = sign_extend32(regval, 16); - - return IIO_VAL_INT; + return IIO_VAL_INT; + default: + return -EINVAL; + } } static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val, @@ -199,6 +330,28 @@ static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val, } } +static int rtq6059_adc_read_scale(struct iio_chan_spec const *ch, int *val, + int *val2) +{ + switch (ch->address) { + case RTQ6056_REG_SHUNTVOLT: + /* VSHUNT lsb 10uV */ + *val = 10000; + *val2 = 1000000; + return IIO_VAL_FRACTIONAL; + case RTQ6056_REG_BUSVOLT: + /* VBUS lsb 4mV */ + *val = 4; + return IIO_VAL_INT; + case RTQ6056_REG_POWER: + /* Power lsb 20mW */ + *val = 20; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + /* * Sample frequency for channel VSHUNT and VBUS. The indices correspond * with the bit value expected by the chip. And it can be found at @@ -248,6 +401,10 @@ static const int rtq6056_avg_sample_list[] = { 1, 4, 16, 64, 128, 256, 512, 1024, }; +static const int rtq6059_avg_sample_list[] = { + 1, 2, 4, 8, 16, 32, 64, 128, +}; + static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val) { unsigned int selector; @@ -268,6 +425,30 @@ static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val) return 0; } +static int rtq6059_adc_set_average(struct rtq6056_priv *priv, int val) +{ + unsigned int selector; + int ret; + + if (val > 128 || val < 1) + return -EINVAL; + + /* The supported average sample is 2^x (x from 0 to 7) */ + selector = fls(val) - 1; + + ret = regmap_field_write(priv->rm_fields[F_RTQ6059_BADC], + RTQ6059_AVG_BASE + selector); + if (ret) + return ret; + + ret = regmap_field_write(priv->rm_fields[F_RTQ6059_SADC], + RTQ6059_AVG_BASE + selector); + + priv->avg_sample = BIT(selector); + + return 0; +} + static int rtq6056_adc_get_sample_freq(struct rtq6056_priv *priv, struct iio_chan_spec const *ch, int *val) { @@ -292,12 +473,13 @@ static int rtq6056_adc_read_raw(struct iio_dev *indio_dev, int *val2, long mask) { struct rtq6056_priv *priv = iio_priv(indio_dev); + const struct richtek_dev_data *devdata = priv->devdata; switch (mask) { case IIO_CHAN_INFO_RAW: return rtq6056_adc_read_channel(priv, chan, val); case IIO_CHAN_INFO_SCALE: - return rtq6056_adc_read_scale(chan, val, val2); + return devdata->read_scale(chan, val, val2); case IIO_CHAN_INFO_OVERSAMPLING_RATIO: *val = priv->avg_sample; return IIO_VAL_INT; @@ -313,6 +495,9 @@ static int rtq6056_adc_read_avail(struct iio_dev *indio_dev, const int **vals, int *type, int *length, long mask) { + struct rtq6056_priv *priv = iio_priv(indio_dev); + const struct richtek_dev_data *devdata = priv->devdata; + switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: *vals = rtq6056_samp_freq_list; @@ -320,9 +505,9 @@ static int rtq6056_adc_read_avail(struct iio_dev *indio_dev, *length = ARRAY_SIZE(rtq6056_samp_freq_list); return IIO_AVAIL_LIST; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - *vals = rtq6056_avg_sample_list; + *vals = devdata->avg_sample_list; + *length = devdata->avg_sample_list_length; *type = IIO_VAL_INT; - *length = ARRAY_SIZE(rtq6056_avg_sample_list); return IIO_AVAIL_LIST; default: return -EINVAL; @@ -334,6 +519,7 @@ static int rtq6056_adc_write_raw(struct iio_dev *indio_dev, int val2, long mask) { struct rtq6056_priv *priv = iio_priv(indio_dev); + const struct richtek_dev_data *devdata = priv->devdata; int ret; ret = iio_device_claim_direct_mode(indio_dev); @@ -342,10 +528,15 @@ static int rtq6056_adc_write_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: + if (devdata->fixed_samp_freq) { + ret = -EINVAL; + break; + } + ret = rtq6056_adc_set_samp_freq(priv, chan, val); break; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - ret = rtq6056_adc_set_average(priv, val); + ret = devdata->set_average(priv, val); break; default: ret = -EINVAL; @@ -374,6 +565,7 @@ static int rtq6056_adc_read_label(struct iio_dev *indio_dev, static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv, int resistor_uohm) { + const struct richtek_dev_data *devdata = priv->devdata; unsigned int calib_val; int ret; @@ -382,8 +574,8 @@ static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv, return -EINVAL; } - /* calibration = 5120000 / (Rshunt (uOhm) * current lsb (1mA)) */ - calib_val = 5120000 / resistor_uohm; + /* calibration = coefficient / (Rshunt (uOhm) * current lsb (1mA)) */ + calib_val = devdata->calib_coefficient / resistor_uohm; ret = regmap_write(priv->regmap, RTQ6056_REG_CALIBRATION, calib_val); if (ret) return ret; @@ -450,6 +642,7 @@ static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct rtq6056_priv *priv = iio_priv(indio_dev); + const struct richtek_dev_data *devdata = priv->devdata; struct device *dev = priv->dev; struct { u16 vals[RTQ6056_MAX_CHANNEL]; @@ -469,6 +662,9 @@ static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p) if (ret) goto out; + if (addr == RTQ6056_REG_BUSVOLT) + raw >>= devdata->vbus_offset; + data.vals[i++] = raw; } @@ -528,20 +724,26 @@ static int rtq6056_probe(struct i2c_client *i2c) struct rtq6056_priv *priv; struct device *dev = &i2c->dev; struct regmap *regmap; + const struct richtek_dev_data *devdata; unsigned int vendor_id, shunt_resistor_uohm; int ret; if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EOPNOTSUPP; + devdata = device_get_match_data(dev); + if (!devdata) + return dev_err_probe(dev, -EINVAL, "Invalid dev data\n"); + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); if (!indio_dev) return -ENOMEM; priv = iio_priv(indio_dev); priv->dev = dev; - priv->vshuntct_us = priv->vbusct_us = 1037; + priv->vshuntct_us = priv->vbusct_us = devdata->default_conv_time_us; priv->avg_sample = 1; + priv->devdata = devdata; i2c_set_clientdata(i2c, priv); regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config); @@ -561,15 +763,11 @@ static int rtq6056_probe(struct i2c_client *i2c) "Invalid vendor id 0x%04x\n", vendor_id); ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields, - rtq6056_reg_fields, F_MAX_FIELDS); + devdata->reg_fields, F_MAX_FIELDS); if (ret) return dev_err_probe(dev, ret, "Failed to init regmap field\n"); - /* - * By default, configure average sample as 1, bus and shunt conversion - * time as 1037 microsecond, and operating mode to all on. - */ - ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG); + ret = regmap_write(regmap, RTQ6056_REG_CONFIG, devdata->default_config); if (ret) return dev_err_probe(dev, ret, "Failed to enable continuous sensing\n"); @@ -598,8 +796,8 @@ static int rtq6056_probe(struct i2c_client *i2c) indio_dev->name = "rtq6056"; indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->channels = rtq6056_channels; - indio_dev->num_channels = ARRAY_SIZE(rtq6056_channels); + indio_dev->channels = devdata->channels; + indio_dev->num_channels = devdata->num_channels; indio_dev->info = &rtq6056_info; ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, @@ -640,8 +838,45 @@ static int rtq6056_runtime_resume(struct device *dev) static DEFINE_RUNTIME_DEV_PM_OPS(rtq6056_pm_ops, rtq6056_runtime_suspend, rtq6056_runtime_resume, NULL); +static const struct richtek_dev_data rtq6056_devdata = { + .default_conv_time_us = 1037, + .calib_coefficient = 5120000, + /* + * By default, configure average sample as 1, bus and shunt conversion + * time as 1037 microsecond, and operating mode to all on. + */ + .default_config = RTQ6056_DEFAULT_CONFIG, + .avg_sample_list = rtq6056_avg_sample_list, + .avg_sample_list_length = ARRAY_SIZE(rtq6056_avg_sample_list), + .reg_fields = rtq6056_reg_fields, + .channels = rtq6056_channels, + .num_channels = ARRAY_SIZE(rtq6056_channels), + .read_scale = rtq6056_adc_read_scale, + .set_average = rtq6056_adc_set_average, +}; + +static const struct richtek_dev_data rtq6059_devdata = { + .fixed_samp_freq = true, + .vbus_offset = RTQ6059_VBUS_LSB_OFFSET, + .default_conv_time_us = 532, + .calib_coefficient = 40960000, + /* + * By default, configure average sample as 1, bus and shunt conversion + * time as 532 microsecond, and operating mode to all on. + */ + .default_config = RTQ6059_DEFAULT_CONFIG, + .avg_sample_list = rtq6059_avg_sample_list, + .avg_sample_list_length = ARRAY_SIZE(rtq6059_avg_sample_list), + .reg_fields = rtq6059_reg_fields, + .channels = rtq6059_channels, + .num_channels = ARRAY_SIZE(rtq6059_channels), + .read_scale = rtq6059_adc_read_scale, + .set_average = rtq6059_adc_set_average, +}; + static const struct of_device_id rtq6056_device_match[] = { - { .compatible = "richtek,rtq6056" }, + { .compatible = "richtek,rtq6056", .data = &rtq6056_devdata }, + { .compatible = "richtek,rtq6059", .data = &rtq6059_devdata }, {} }; MODULE_DEVICE_TABLE(of, rtq6056_device_match); diff --git a/drivers/iio/adc/ti-adc108s102.c b/drivers/iio/adc/ti-adc108s102.c index c82a161630e1..69fcbbc7e418 100644 --- a/drivers/iio/adc/ti-adc108s102.c +++ b/drivers/iio/adc/ti-adc108s102.c @@ -293,13 +293,11 @@ static const struct of_device_id adc108s102_of_match[] = { }; MODULE_DEVICE_TABLE(of, adc108s102_of_match); -#ifdef CONFIG_ACPI static const struct acpi_device_id adc108s102_acpi_ids[] = { { "INT3495", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, adc108s102_acpi_ids); -#endif static const struct spi_device_id adc108s102_id[] = { { "adc108s102", 0 }, @@ -311,7 +309,7 @@ static struct spi_driver adc108s102_driver = { .driver = { .name = "adc108s102", .of_match_table = adc108s102_of_match, - .acpi_match_table = ACPI_PTR(adc108s102_acpi_ids), + .acpi_match_table = adc108s102_acpi_ids, }, .probe = adc108s102_probe, .id_table = adc108s102_id, diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c index 6799ea49dbc7..6ae967e4d8fa 100644 --- a/drivers/iio/adc/ti-ads1015.c +++ b/drivers/iio/adc/ti-ads1015.c @@ -925,7 +925,7 @@ static int ads1015_client_get_channels_config(struct i2c_client *client) if (!fwnode_property_read_u32(node, "ti,gain", &pval)) { pga = pval; - if (pga > 6) { + if (pga > 5) { dev_err(dev, "invalid gain on %pfw\n", node); fwnode_handle_put(node); return -EINVAL; diff --git a/drivers/iio/adc/ti-ads1298.c b/drivers/iio/adc/ti-ads1298.c new file mode 100644 index 000000000000..1d1eaba3d6d1 --- /dev/null +++ b/drivers/iio/adc/ti-ads1298.c @@ -0,0 +1,771 @@ +// SPDX-License-Identifier: GPL-2.0 +/* TI ADS1298 chip family driver + * Copyright (C) 2023 - 2024 Topic Embedded Products + */ + +#include <linux/bitfield.h> +#include <linux/cleanup.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/log2.h> +#include <linux/math.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/units.h> + +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/kfifo_buf.h> + +#include <asm/unaligned.h> + +/* Commands */ +#define ADS1298_CMD_WAKEUP 0x02 +#define ADS1298_CMD_STANDBY 0x04 +#define ADS1298_CMD_RESET 0x06 +#define ADS1298_CMD_START 0x08 +#define ADS1298_CMD_STOP 0x0a +#define ADS1298_CMD_RDATAC 0x10 +#define ADS1298_CMD_SDATAC 0x11 +#define ADS1298_CMD_RDATA 0x12 +#define ADS1298_CMD_RREG 0x20 +#define ADS1298_CMD_WREG 0x40 + +/* Registers */ +#define ADS1298_REG_ID 0x00 +#define ADS1298_MASK_ID_FAMILY GENMASK(7, 3) +#define ADS1298_MASK_ID_CHANNELS GENMASK(2, 0) +#define ADS1298_ID_FAMILY_ADS129X 0x90 +#define ADS1298_ID_FAMILY_ADS129XR 0xd0 + +#define ADS1298_REG_CONFIG1 0x01 +#define ADS1298_MASK_CONFIG1_HR BIT(7) +#define ADS1298_MASK_CONFIG1_DR GENMASK(2, 0) +#define ADS1298_SHIFT_DR_HR 6 +#define ADS1298_SHIFT_DR_LP 7 +#define ADS1298_LOWEST_DR 0x06 + +#define ADS1298_REG_CONFIG2 0x02 +#define ADS1298_MASK_CONFIG2_RESERVED BIT(6) +#define ADS1298_MASK_CONFIG2_WCT_CHOP BIT(5) +#define ADS1298_MASK_CONFIG2_INT_TEST BIT(4) +#define ADS1298_MASK_CONFIG2_TEST_AMP BIT(2) +#define ADS1298_MASK_CONFIG2_TEST_FREQ_DC GENMASK(1, 0) +#define ADS1298_MASK_CONFIG2_TEST_FREQ_SLOW 0 +#define ADS1298_MASK_CONFIG2_TEST_FREQ_FAST BIT(0) + +#define ADS1298_REG_CONFIG3 0x03 +#define ADS1298_MASK_CONFIG3_PWR_REFBUF BIT(7) +#define ADS1298_MASK_CONFIG3_RESERVED BIT(6) +#define ADS1298_MASK_CONFIG3_VREF_4V BIT(5) + +#define ADS1298_REG_LOFF 0x04 +#define ADS1298_REG_CHnSET(n) (0x05 + n) +#define ADS1298_MASK_CH_PD BIT(7) +#define ADS1298_MASK_CH_PGA GENMASK(6, 4) +#define ADS1298_MASK_CH_MUX GENMASK(2, 0) + +#define ADS1298_REG_LOFF_STATP 0x12 +#define ADS1298_REG_LOFF_STATN 0x13 +#define ADS1298_REG_CONFIG4 0x17 +#define ADS1298_MASK_CONFIG4_SINGLE_SHOT BIT(3) + +#define ADS1298_REG_WCT1 0x18 +#define ADS1298_REG_WCT2 0x19 + +#define ADS1298_MAX_CHANNELS 8 +#define ADS1298_BITS_PER_SAMPLE 24 +#define ADS1298_CLK_RATE_HZ 2048000 +#define ADS1298_CLOCKS_TO_USECS(x) \ + (DIV_ROUND_UP((x) * MICROHZ_PER_HZ, ADS1298_CLK_RATE_HZ)) +/* + * Read/write register commands require 4 clocks to decode, for speeds above + * 2x the clock rate, this would require extra time between the command byte and + * the data. Much simpler is to just limit the SPI transfer speed while doing + * register access. + */ +#define ADS1298_SPI_BUS_SPEED_SLOW ADS1298_CLK_RATE_HZ +/* For reading and writing registers, we need a 3-byte buffer */ +#define ADS1298_SPI_CMD_BUFFER_SIZE 3 +/* Outputs status word and 'n' 24-bit samples, plus the command byte */ +#define ADS1298_SPI_RDATA_BUFFER_SIZE(n) (((n) + 1) * 3 + 1) +#define ADS1298_SPI_RDATA_BUFFER_SIZE_MAX \ + ADS1298_SPI_RDATA_BUFFER_SIZE(ADS1298_MAX_CHANNELS) + +struct ads1298_private { + const struct ads1298_chip_info *chip_info; + struct spi_device *spi; + struct regulator *reg_avdd; + struct regulator *reg_vref; + struct clk *clk; + struct regmap *regmap; + struct completion completion; + struct iio_trigger *trig; + struct spi_transfer rdata_xfer; + struct spi_message rdata_msg; + spinlock_t irq_busy_lock; /* Handshake between SPI and DRDY irqs */ + /* + * rdata_xfer_busy increments when a DRDY occurs and decrements when SPI + * completion is reported. Hence its meaning is: + * 0 = Waiting for DRDY interrupt + * 1 = SPI transfer in progress + * 2 = DRDY during SPI transfer, start another transfer on completion + * >2 = Multiple DRDY during transfer, lost rdata_xfer_busy - 2 samples + */ + unsigned int rdata_xfer_busy; + + /* Temporary storage for demuxing data after SPI transfer */ + u32 bounce_buffer[ADS1298_MAX_CHANNELS]; + + /* For synchronous SPI exchanges (read/write registers) */ + u8 cmd_buffer[ADS1298_SPI_CMD_BUFFER_SIZE] __aligned(IIO_DMA_MINALIGN); + + /* Buffer used for incoming SPI data */ + u8 rx_buffer[ADS1298_SPI_RDATA_BUFFER_SIZE_MAX]; + /* Contains the RDATA command and zeroes to clock out */ + u8 tx_buffer[ADS1298_SPI_RDATA_BUFFER_SIZE_MAX]; +}; + +/* Three bytes per sample in RX buffer, starting at offset 4 */ +#define ADS1298_OFFSET_IN_RX_BUFFER(index) (3 * (index) + 4) + +#define ADS1298_CHAN(index) \ +{ \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = index, \ + .address = ADS1298_OFFSET_IN_RX_BUFFER(index), \ + .info_mask_separate = \ + BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = \ + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = ADS1298_BITS_PER_SAMPLE, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec ads1298_channels[] = { + ADS1298_CHAN(0), + ADS1298_CHAN(1), + ADS1298_CHAN(2), + ADS1298_CHAN(3), + ADS1298_CHAN(4), + ADS1298_CHAN(5), + ADS1298_CHAN(6), + ADS1298_CHAN(7), +}; + +static int ads1298_write_cmd(struct ads1298_private *priv, u8 command) +{ + struct spi_transfer xfer = { + .tx_buf = priv->cmd_buffer, + .rx_buf = priv->cmd_buffer, + .len = 1, + .speed_hz = ADS1298_SPI_BUS_SPEED_SLOW, + .delay = { + .value = 2, + .unit = SPI_DELAY_UNIT_USECS, + }, + }; + + priv->cmd_buffer[0] = command; + + return spi_sync_transfer(priv->spi, &xfer, 1); +} + +static int ads1298_read_one(struct ads1298_private *priv, int chan_index) +{ + int ret; + + /* Enable the channel */ + ret = regmap_update_bits(priv->regmap, ADS1298_REG_CHnSET(chan_index), + ADS1298_MASK_CH_PD, 0); + if (ret) + return ret; + + /* Enable single-shot mode, so we don't need to send a STOP */ + ret = regmap_update_bits(priv->regmap, ADS1298_REG_CONFIG4, + ADS1298_MASK_CONFIG4_SINGLE_SHOT, + ADS1298_MASK_CONFIG4_SINGLE_SHOT); + if (ret) + return ret; + + reinit_completion(&priv->completion); + + ret = ads1298_write_cmd(priv, ADS1298_CMD_START); + if (ret < 0) { + dev_err(&priv->spi->dev, "CMD_START error: %d\n", ret); + return ret; + } + + /* Cannot take longer than 40ms (250Hz) */ + ret = wait_for_completion_timeout(&priv->completion, msecs_to_jiffies(50)); + if (!ret) + return -ETIMEDOUT; + + return 0; +} + +static int ads1298_get_samp_freq(struct ads1298_private *priv, int *val) +{ + unsigned long rate; + unsigned int cfg; + int ret; + + ret = regmap_read(priv->regmap, ADS1298_REG_CONFIG1, &cfg); + if (ret) + return ret; + + if (priv->clk) + rate = clk_get_rate(priv->clk); + else + rate = ADS1298_CLK_RATE_HZ; + if (!rate) + return -EINVAL; + + /* Data rate shift depends on HR/LP mode */ + if (cfg & ADS1298_MASK_CONFIG1_HR) + rate >>= ADS1298_SHIFT_DR_HR; + else + rate >>= ADS1298_SHIFT_DR_LP; + + *val = rate >> (cfg & ADS1298_MASK_CONFIG1_DR); + + return IIO_VAL_INT; +} + +static int ads1298_set_samp_freq(struct ads1298_private *priv, int val) +{ + unsigned long rate; + unsigned int factor; + unsigned int cfg; + + if (priv->clk) + rate = clk_get_rate(priv->clk); + else + rate = ADS1298_CLK_RATE_HZ; + if (!rate) + return -EINVAL; + if (val <= 0) + return -EINVAL; + + factor = (rate >> ADS1298_SHIFT_DR_HR) / val; + if (factor >= BIT(ADS1298_SHIFT_DR_LP)) + cfg = ADS1298_LOWEST_DR; + else if (factor) + cfg = ADS1298_MASK_CONFIG1_HR | ilog2(factor); /* Use HR mode */ + else + cfg = ADS1298_MASK_CONFIG1_HR; /* Fastest possible */ + + return regmap_update_bits(priv->regmap, ADS1298_REG_CONFIG1, + ADS1298_MASK_CONFIG1_HR | ADS1298_MASK_CONFIG1_DR, + cfg); +} + +static const u8 ads1298_pga_settings[] = { 6, 1, 2, 3, 4, 8, 12 }; + +static int ads1298_get_scale(struct ads1298_private *priv, + int channel, int *val, int *val2) +{ + int ret; + unsigned int regval; + u8 gain; + + if (priv->reg_vref) { + ret = regulator_get_voltage(priv->reg_vref); + if (ret < 0) + return ret; + + *val = ret / MILLI; /* Convert to millivolts */ + } else { + ret = regmap_read(priv->regmap, ADS1298_REG_CONFIG3, ®val); + if (ret) + return ret; + + /* Refererence in millivolts */ + *val = regval & ADS1298_MASK_CONFIG3_VREF_4V ? 4000 : 2400; + } + + ret = regmap_read(priv->regmap, ADS1298_REG_CHnSET(channel), ®val); + if (ret) + return ret; + + gain = ads1298_pga_settings[FIELD_GET(ADS1298_MASK_CH_PGA, regval)]; + *val /= gain; /* Full scale is VREF / gain */ + + *val2 = ADS1298_BITS_PER_SAMPLE - 1; /* Signed, hence the -1 */ + + return IIO_VAL_FRACTIONAL_LOG2; +} + +static int ads1298_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = ads1298_read_one(priv, chan->scan_index); + + iio_device_release_direct_mode(indio_dev); + + if (ret) + return ret; + + *val = sign_extend32(get_unaligned_be24(priv->rx_buffer + chan->address), + ADS1298_BITS_PER_SAMPLE - 1); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + return ads1298_get_scale(priv, chan->channel, val, val2); + case IIO_CHAN_INFO_SAMP_FREQ: + return ads1298_get_samp_freq(priv, val); + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = regmap_read(priv->regmap, ADS1298_REG_CONFIG1, val); + if (ret) + return ret; + + *val = 16 << (*val & ADS1298_MASK_CONFIG1_DR); + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int ads1298_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return ads1298_set_samp_freq(priv, val); + default: + return -EINVAL; + } +} + +static int ads1298_reg_write(void *context, unsigned int reg, unsigned int val) +{ + struct ads1298_private *priv = context; + struct spi_transfer reg_write_xfer = { + .tx_buf = priv->cmd_buffer, + .rx_buf = priv->cmd_buffer, + .len = 3, + .speed_hz = ADS1298_SPI_BUS_SPEED_SLOW, + .delay = { + .value = 2, + .unit = SPI_DELAY_UNIT_USECS, + }, + }; + + priv->cmd_buffer[0] = ADS1298_CMD_WREG | reg; + priv->cmd_buffer[1] = 0; /* Number of registers to be written - 1 */ + priv->cmd_buffer[2] = val; + + return spi_sync_transfer(priv->spi, ®_write_xfer, 1); +} + +static int ads1298_reg_read(void *context, unsigned int reg, unsigned int *val) +{ + struct ads1298_private *priv = context; + struct spi_transfer reg_read_xfer = { + .tx_buf = priv->cmd_buffer, + .rx_buf = priv->cmd_buffer, + .len = 3, + .speed_hz = ADS1298_SPI_BUS_SPEED_SLOW, + .delay = { + .value = 2, + .unit = SPI_DELAY_UNIT_USECS, + }, + }; + int ret; + + priv->cmd_buffer[0] = ADS1298_CMD_RREG | reg; + priv->cmd_buffer[1] = 0; /* Number of registers to be read - 1 */ + priv->cmd_buffer[2] = 0; + + ret = spi_sync_transfer(priv->spi, ®_read_xfer, 1); + if (ret) + return ret; + + *val = priv->cmd_buffer[2]; + + return 0; +} + +static int ads1298_reg_access(struct iio_dev *indio_dev, unsigned int reg, + unsigned int writeval, unsigned int *readval) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + + if (readval) + return regmap_read(priv->regmap, reg, readval); + + return regmap_write(priv->regmap, reg, writeval); +} + +static void ads1298_rdata_unmark_busy(struct ads1298_private *priv) +{ + /* Notify we're no longer waiting for the SPI transfer to complete */ + guard(spinlock_irqsave)(&priv->irq_busy_lock); + priv->rdata_xfer_busy = 0; +} + +static int ads1298_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + unsigned int val; + int ret; + int i; + + /* Make the interrupt routines start with a clean slate */ + ads1298_rdata_unmark_busy(priv); + + /* Configure power-down bits to match scan mask */ + for (i = 0; i < indio_dev->num_channels; i++) { + val = test_bit(i, scan_mask) ? 0 : ADS1298_MASK_CH_PD; + ret = regmap_update_bits(priv->regmap, ADS1298_REG_CHnSET(i), + ADS1298_MASK_CH_PD, val); + if (ret) + return ret; + } + + return 0; +} + +static const struct iio_info ads1298_info = { + .read_raw = &ads1298_read_raw, + .write_raw = &ads1298_write_raw, + .update_scan_mode = &ads1298_update_scan_mode, + .debugfs_reg_access = &ads1298_reg_access, +}; + +static void ads1298_rdata_release_busy_or_restart(struct ads1298_private *priv) +{ + guard(spinlock_irqsave)(&priv->irq_busy_lock); + + if (priv->rdata_xfer_busy > 1) { + /* + * DRDY interrupt occurred before SPI completion. Start a new + * SPI transaction now to retrieve the data that wasn't latched + * into the ADS1298 chip's transfer buffer yet. + */ + spi_async(priv->spi, &priv->rdata_msg); + /* + * If more than one DRDY took place, there was an overrun. Since + * the sample is already lost, reset the counter to 1 so that + * we will wait for a DRDY interrupt after this SPI transaction. + */ + priv->rdata_xfer_busy = 1; + } else { + /* No pending data, wait for DRDY */ + priv->rdata_xfer_busy = 0; + } +} + +/* Called from SPI completion interrupt handler */ +static void ads1298_rdata_complete(void *context) +{ + struct iio_dev *indio_dev = context; + struct ads1298_private *priv = iio_priv(indio_dev); + int scan_index; + u32 *bounce = priv->bounce_buffer; + + if (!iio_buffer_enabled(indio_dev)) { + /* + * for a single transfer mode we're kept in direct_mode until + * completion, avoiding a race with buffered IO. + */ + ads1298_rdata_unmark_busy(priv); + complete(&priv->completion); + return; + } + + /* Demux the channel data into our bounce buffer */ + for_each_set_bit(scan_index, indio_dev->active_scan_mask, + indio_dev->masklength) { + const struct iio_chan_spec *scan_chan = + &indio_dev->channels[scan_index]; + const u8 *data = priv->rx_buffer + scan_chan->address; + + *bounce++ = get_unaligned_be24(data); + } + + /* rx_buffer can be overwritten from this point on */ + ads1298_rdata_release_busy_or_restart(priv); + + iio_push_to_buffers(indio_dev, priv->bounce_buffer); +} + +static irqreturn_t ads1298_interrupt(int irq, void *dev_id) +{ + struct iio_dev *indio_dev = dev_id; + struct ads1298_private *priv = iio_priv(indio_dev); + unsigned int wasbusy; + + guard(spinlock_irqsave)(&priv->irq_busy_lock); + + wasbusy = priv->rdata_xfer_busy++; + /* When no SPI transfer in transit, start one now */ + if (!wasbusy) + spi_async(priv->spi, &priv->rdata_msg); + + return IRQ_HANDLED; +}; + +static int ads1298_buffer_postenable(struct iio_dev *indio_dev) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + int ret; + + /* Disable single-shot mode */ + ret = regmap_update_bits(priv->regmap, ADS1298_REG_CONFIG4, + ADS1298_MASK_CONFIG4_SINGLE_SHOT, 0); + if (ret) + return ret; + + return ads1298_write_cmd(priv, ADS1298_CMD_START); +} + +static int ads1298_buffer_predisable(struct iio_dev *indio_dev) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + + return ads1298_write_cmd(priv, ADS1298_CMD_STOP); +} + +static const struct iio_buffer_setup_ops ads1298_setup_ops = { + .postenable = &ads1298_buffer_postenable, + .predisable = &ads1298_buffer_predisable, +}; + +static void ads1298_reg_disable(void *reg) +{ + regulator_disable(reg); +} + +static const struct regmap_range ads1298_regmap_volatile_range[] = { + regmap_reg_range(ADS1298_REG_LOFF_STATP, ADS1298_REG_LOFF_STATN), +}; + +static const struct regmap_access_table ads1298_regmap_volatile = { + .yes_ranges = ads1298_regmap_volatile_range, + .n_yes_ranges = ARRAY_SIZE(ads1298_regmap_volatile_range), +}; + +static const struct regmap_config ads1298_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .reg_read = ads1298_reg_read, + .reg_write = ads1298_reg_write, + .max_register = ADS1298_REG_WCT2, + .volatile_table = &ads1298_regmap_volatile, + .cache_type = REGCACHE_MAPLE, +}; + +static int ads1298_init(struct iio_dev *indio_dev) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + struct device *dev = &priv->spi->dev; + const char *suffix; + unsigned int val; + int ret; + + /* Device initializes into RDATAC mode, which we don't want */ + ret = ads1298_write_cmd(priv, ADS1298_CMD_SDATAC); + if (ret) + return ret; + + ret = regmap_read(priv->regmap, ADS1298_REG_ID, &val); + if (ret) + return ret; + + /* Fill in name and channel count based on what the chip told us */ + indio_dev->num_channels = 4 + 2 * (val & ADS1298_MASK_ID_CHANNELS); + switch (val & ADS1298_MASK_ID_FAMILY) { + case ADS1298_ID_FAMILY_ADS129X: + suffix = ""; + break; + case ADS1298_ID_FAMILY_ADS129XR: + suffix = "r"; + break; + default: + return dev_err_probe(dev, -ENODEV, "Unknown ID: 0x%x\n", val); + } + indio_dev->name = devm_kasprintf(dev, GFP_KERNEL, "ads129%u%s", + indio_dev->num_channels, suffix); + + /* Enable internal test signal, double amplitude, double frequency */ + ret = regmap_write(priv->regmap, ADS1298_REG_CONFIG2, + ADS1298_MASK_CONFIG2_RESERVED | + ADS1298_MASK_CONFIG2_INT_TEST | + ADS1298_MASK_CONFIG2_TEST_AMP | + ADS1298_MASK_CONFIG2_TEST_FREQ_FAST); + if (ret) + return ret; + + val = ADS1298_MASK_CONFIG3_RESERVED; /* Must write 1 always */ + if (!priv->reg_vref) { + /* Enable internal reference */ + val |= ADS1298_MASK_CONFIG3_PWR_REFBUF; + /* Use 4V VREF when power supply is at least 4.4V */ + if (regulator_get_voltage(priv->reg_avdd) >= 4400000) + val |= ADS1298_MASK_CONFIG3_VREF_4V; + } + return regmap_write(priv->regmap, ADS1298_REG_CONFIG3, val); +} + +static int ads1298_probe(struct spi_device *spi) +{ + struct ads1298_private *priv; + struct iio_dev *indio_dev; + struct device *dev = &spi->dev; + struct gpio_desc *reset_gpio; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + + /* Reset to be asserted before enabling clock and power */ + reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(reset_gpio)) + return dev_err_probe(dev, PTR_ERR(reset_gpio), + "Cannot get reset GPIO\n"); + + /* VREF can be supplied externally, otherwise use internal reference */ + priv->reg_vref = devm_regulator_get_optional(dev, "vref"); + if (IS_ERR(priv->reg_vref)) { + if (PTR_ERR(priv->reg_vref) != -ENODEV) + return dev_err_probe(dev, PTR_ERR(priv->reg_vref), + "Failed to get vref regulator\n"); + + priv->reg_vref = NULL; + } else { + ret = regulator_enable(priv->reg_vref); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, ads1298_reg_disable, priv->reg_vref); + if (ret) + return ret; + } + + priv->clk = devm_clk_get_optional_enabled(dev, "clk"); + if (IS_ERR(priv->clk)) + return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get clk\n"); + + priv->reg_avdd = devm_regulator_get(dev, "avdd"); + if (IS_ERR(priv->reg_avdd)) + return dev_err_probe(dev, PTR_ERR(priv->reg_avdd), + "Failed to get avdd regulator\n"); + + ret = regulator_enable(priv->reg_avdd); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable avdd regulator\n"); + + ret = devm_add_action_or_reset(dev, ads1298_reg_disable, priv->reg_avdd); + if (ret) + return ret; + + priv->spi = spi; + init_completion(&priv->completion); + spin_lock_init(&priv->irq_busy_lock); + priv->regmap = devm_regmap_init(dev, NULL, priv, &ads1298_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + indio_dev->channels = ads1298_channels; + indio_dev->info = &ads1298_info; + + if (reset_gpio) { + /* + * Deassert reset now that clock and power are active. + * Minimum reset pulsewidth is 2 clock cycles. + */ + fsleep(ADS1298_CLOCKS_TO_USECS(2)); + gpiod_set_value_cansleep(reset_gpio, 0); + } else { + ret = ads1298_write_cmd(priv, ADS1298_CMD_RESET); + if (ret) + return dev_err_probe(dev, ret, "RESET failed\n"); + } + /* Wait 18 clock cycles for reset command to complete */ + fsleep(ADS1298_CLOCKS_TO_USECS(18)); + + ret = ads1298_init(indio_dev); + if (ret) + return dev_err_probe(dev, ret, "Init failed\n"); + + priv->tx_buffer[0] = ADS1298_CMD_RDATA; + priv->rdata_xfer.tx_buf = priv->tx_buffer; + priv->rdata_xfer.rx_buf = priv->rx_buffer; + priv->rdata_xfer.len = ADS1298_SPI_RDATA_BUFFER_SIZE(indio_dev->num_channels); + /* Must keep CS low for 4 clocks */ + priv->rdata_xfer.delay.value = 2; + priv->rdata_xfer.delay.unit = SPI_DELAY_UNIT_USECS; + spi_message_init_with_transfers(&priv->rdata_msg, &priv->rdata_xfer, 1); + priv->rdata_msg.complete = &ads1298_rdata_complete; + priv->rdata_msg.context = indio_dev; + + ret = devm_request_irq(dev, spi->irq, &ads1298_interrupt, + IRQF_TRIGGER_FALLING, indio_dev->name, + indio_dev); + if (ret) + return ret; + + ret = devm_iio_kfifo_buffer_setup(dev, indio_dev, &ads1298_setup_ops); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct spi_device_id ads1298_id[] = { + { "ads1298" }, + { } +}; +MODULE_DEVICE_TABLE(spi, ads1298_id); + +static const struct of_device_id ads1298_of_table[] = { + { .compatible = "ti,ads1298" }, + { } +}; +MODULE_DEVICE_TABLE(of, ads1298_of_table); + +static struct spi_driver ads1298_driver = { + .driver = { + .name = "ads1298", + .of_match_table = ads1298_of_table, + }, + .probe = ads1298_probe, + .id_table = ads1298_id, +}; +module_spi_driver(ads1298_driver); + +MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>"); +MODULE_DESCRIPTION("TI ADS1298 ADC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c index ef06a897421a..9440a268a78c 100644 --- a/drivers/iio/adc/ti-ads8688.c +++ b/drivers/iio/adc/ti-ads8688.c @@ -11,7 +11,7 @@ #include <linux/regulator/consumer.h> #include <linux/err.h> #include <linux/module.h> -#include <linux/of.h> +#include <linux/mod_devicetable.h> #include <linux/iio/iio.h> #include <linux/iio/buffer.h> |