diff options
Diffstat (limited to 'drivers/iio/dac')
-rw-r--r-- | drivers/iio/dac/Kconfig | 6 | ||||
-rw-r--r-- | drivers/iio/dac/ad5446.c | 6 | ||||
-rw-r--r-- | drivers/iio/dac/ad5592r.c | 4 | ||||
-rw-r--r-- | drivers/iio/dac/ad5593r.c | 2 | ||||
-rw-r--r-- | drivers/iio/dac/ad5624r_spi.c | 8 | ||||
-rw-r--r-- | drivers/iio/dac/ltc2632.c | 67 |
6 files changed, 77 insertions, 16 deletions
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index 93744011b63f..3728f6325501 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -279,12 +279,12 @@ config LTC1660 module will be called ltc1660. config LTC2632 - tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver" + tristate "Linear Technology LTC2632-12/10/8 and similar DAC spi driver" depends on SPI help Say yes here to build support for Linear Technology - LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and - LTC2636-8 converters (DAC). + LTC2632, LTC2634 and LTC2636 DAC resolution 12/10/8 bit + low 0-2.5V and high 0-4.096V range converters. To compile this driver as a module, choose M here: the module will be called ltc2632. diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c index 61c670f7fc5f..9884e29b19b7 100644 --- a/drivers/iio/dac/ad5446.c +++ b/drivers/iio/dac/ad5446.c @@ -21,6 +21,8 @@ #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> +#include <asm/unaligned.h> + #define MODE_PWRDWN_1k 0x1 #define MODE_PWRDWN_100k 0x2 #define MODE_PWRDWN_TRISTATE 0x3 @@ -302,9 +304,7 @@ static int ad5660_write(struct ad5446_state *st, unsigned val) struct spi_device *spi = to_spi_device(st->dev); uint8_t data[3]; - data[0] = (val >> 16) & 0xFF; - data[1] = (val >> 8) & 0xFF; - data[2] = val & 0xFF; + put_unaligned_be24(val, &data[0]); return spi_write(spi, data, sizeof(data)); } diff --git a/drivers/iio/dac/ad5592r.c b/drivers/iio/dac/ad5592r.c index 34ba059a77da..49308ad13c4b 100644 --- a/drivers/iio/dac/ad5592r.c +++ b/drivers/iio/dac/ad5592r.c @@ -98,7 +98,7 @@ static int ad5592r_reg_read(struct ad5592r_state *st, u8 reg, u16 *value) return 0; } -static int ad5593r_gpio_read(struct ad5592r_state *st, u8 *value) +static int ad5592r_gpio_read(struct ad5592r_state *st, u8 *value) { int ret; @@ -121,7 +121,7 @@ static const struct ad5592r_rw_ops ad5592r_rw_ops = { .read_adc = ad5592r_read_adc, .reg_write = ad5592r_reg_write, .reg_read = ad5592r_reg_read, - .gpio_read = ad5593r_gpio_read, + .gpio_read = ad5592r_gpio_read, }; static int ad5592r_spi_probe(struct spi_device *spi) diff --git a/drivers/iio/dac/ad5593r.c b/drivers/iio/dac/ad5593r.c index 44ea3b8117d0..1fbe9c019c7f 100644 --- a/drivers/iio/dac/ad5593r.c +++ b/drivers/iio/dac/ad5593r.c @@ -134,5 +134,5 @@ static struct i2c_driver ad5593r_driver = { module_i2c_driver(ad5593r_driver); MODULE_AUTHOR("Paul Cercueil <paul.cercueil@analog.com>"); -MODULE_DESCRIPTION("Analog Devices AD5592R multi-channel converters"); +MODULE_DESCRIPTION("Analog Devices AD5593R multi-channel converters"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c index e6c022e1dc1c..2015a5df840c 100644 --- a/drivers/iio/dac/ad5624r_spi.c +++ b/drivers/iio/dac/ad5624r_spi.c @@ -18,6 +18,8 @@ #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> +#include <asm/unaligned.h> + #include "ad5624r.h" static int ad5624r_spi_write(struct spi_device *spi, @@ -35,11 +37,9 @@ static int ad5624r_spi_write(struct spi_device *spi, * for the AD5664R, AD5644R, and AD5624R, respectively. */ data = (0 << 22) | (cmd << 19) | (addr << 16) | (val << shift); - msg[0] = data >> 16; - msg[1] = data >> 8; - msg[2] = data; + put_unaligned_be24(data, &msg[0]); - return spi_write(spi, msg, 3); + return spi_write(spi, msg, sizeof(msg)); } static int ad5624r_read_raw(struct iio_dev *indio_dev, diff --git a/drivers/iio/dac/ltc2632.c b/drivers/iio/dac/ltc2632.c index 7adc91056aa1..f891311f05cf 100644 --- a/drivers/iio/dac/ltc2632.c +++ b/drivers/iio/dac/ltc2632.c @@ -12,6 +12,8 @@ #include <linux/iio/iio.h> #include <linux/regulator/consumer.h> +#include <asm/unaligned.h> + #define LTC2632_CMD_WRITE_INPUT_N 0x0 #define LTC2632_CMD_UPDATE_DAC_N 0x1 #define LTC2632_CMD_WRITE_INPUT_N_UPDATE_ALL 0x2 @@ -24,6 +26,7 @@ /** * struct ltc2632_chip_info - chip specific information * @channels: channel spec for the DAC + * @num_channels: DAC channel count of the chip * @vref_mv: internal reference voltage */ struct ltc2632_chip_info { @@ -53,6 +56,12 @@ enum ltc2632_supported_device_ids { ID_LTC2632H12, ID_LTC2632H10, ID_LTC2632H8, + ID_LTC2634L12, + ID_LTC2634L10, + ID_LTC2634L8, + ID_LTC2634H12, + ID_LTC2634H10, + ID_LTC2634H8, ID_LTC2636L12, ID_LTC2636L10, ID_LTC2636L8, @@ -75,9 +84,7 @@ static int ltc2632_spi_write(struct spi_device *spi, * 10-, 8-bit input code followed by 4, 6, or 8 don't care bits. */ data = (cmd << 20) | (addr << 16) | (val << shift); - msg[0] = data >> 16; - msg[1] = data >> 8; - msg[2] = data; + put_unaligned_be24(data, &msg[0]); return spi_write(spi, msg, sizeof(msg)); } @@ -235,6 +242,36 @@ static const struct ltc2632_chip_info ltc2632_chip_info_tbl[] = { .num_channels = 2, .vref_mv = 4096, }, + [ID_LTC2634L12] = { + .channels = ltc2632x12_channels, + .num_channels = 4, + .vref_mv = 2500, + }, + [ID_LTC2634L10] = { + .channels = ltc2632x10_channels, + .num_channels = 4, + .vref_mv = 2500, + }, + [ID_LTC2634L8] = { + .channels = ltc2632x8_channels, + .num_channels = 4, + .vref_mv = 2500, + }, + [ID_LTC2634H12] = { + .channels = ltc2632x12_channels, + .num_channels = 4, + .vref_mv = 4096, + }, + [ID_LTC2634H10] = { + .channels = ltc2632x10_channels, + .num_channels = 4, + .vref_mv = 4096, + }, + [ID_LTC2634H8] = { + .channels = ltc2632x8_channels, + .num_channels = 4, + .vref_mv = 4096, + }, [ID_LTC2636L12] = { .channels = ltc2632x12_channels, .num_channels = 8, @@ -356,6 +393,12 @@ static const struct spi_device_id ltc2632_id[] = { { "ltc2632-h12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H12] }, { "ltc2632-h10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H10] }, { "ltc2632-h8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H8] }, + { "ltc2634-l12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634L12] }, + { "ltc2634-l10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634L10] }, + { "ltc2634-l8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634L8] }, + { "ltc2634-h12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634H12] }, + { "ltc2634-h10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634H10] }, + { "ltc2634-h8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634H8] }, { "ltc2636-l12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2636L12] }, { "ltc2636-l10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2636L10] }, { "ltc2636-l8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2636L8] }, @@ -386,6 +429,24 @@ static const struct of_device_id ltc2632_of_match[] = { .compatible = "lltc,ltc2632-h8", .data = <c2632_chip_info_tbl[ID_LTC2632H8] }, { + .compatible = "lltc,ltc2634-l12", + .data = <c2632_chip_info_tbl[ID_LTC2634L12] + }, { + .compatible = "lltc,ltc2634-l10", + .data = <c2632_chip_info_tbl[ID_LTC2634L10] + }, { + .compatible = "lltc,ltc2634-l8", + .data = <c2632_chip_info_tbl[ID_LTC2634L8] + }, { + .compatible = "lltc,ltc2634-h12", + .data = <c2632_chip_info_tbl[ID_LTC2634H12] + }, { + .compatible = "lltc,ltc2634-h10", + .data = <c2632_chip_info_tbl[ID_LTC2634H10] + }, { + .compatible = "lltc,ltc2634-h8", + .data = <c2632_chip_info_tbl[ID_LTC2634H8] + }, { .compatible = "lltc,ltc2636-l12", .data = <c2632_chip_info_tbl[ID_LTC2636L12] }, { |