diff options
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_iba7322.c')
-rw-r--r-- | drivers/infiniband/hw/qib/qib_iba7322.c | 135 |
1 files changed, 90 insertions, 45 deletions
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index a9dc6935e07f..5bd2162b95dc 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -2311,12 +2311,15 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); + ppd->cpspec->ibcctrl_a = val; /* * Reset the PCS interface to the serdes (and also ibc, which is still * in reset from above). Writes new value of ibcctrl_a as last step. */ qib_7322_mini_pcs_reset(ppd); qib_write_kreg(dd, kr_scratch, 0ULL); + /* clear the linkinit cmds */ + ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); if (!ppd->cpspec->ibcctrl_b) { unsigned lse = ppd->link_speed_enabled; @@ -2388,11 +2391,6 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); - /* Hold the link state machine for mezz boards */ - if (IS_QMH(dd) || IS_QME(dd)) - qib_set_ib_7322_lstate(ppd, 0, - QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); - /* Also enable IBSTATUSCHG interrupt. */ val = qib_read_kreg_port(ppd, krp_errmask); qib_write_kreg_port(ppd, krp_errmask, @@ -2854,9 +2852,8 @@ static irqreturn_t qib_7322intr(int irq, void *data) for (i = 0; i < dd->first_user_ctxt; i++) { if (ctxtrbits & rmask) { ctxtrbits &= ~rmask; - if (dd->rcd[i]) { + if (dd->rcd[i]) qib_kreceive(dd->rcd[i], NULL, &npkts); - } } rmask <<= 1; } @@ -5231,6 +5228,8 @@ static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) QIBL_IB_AUTONEG_INPROG))) set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { + struct qib_qsfp_data *qd = + &ppd->cpspec->qsfp_data; /* unlock the Tx settings, speed may change */ qib_write_kreg_port(ppd, krp_tx_deemph_override, SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, @@ -5238,6 +5237,12 @@ static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) qib_cancel_sends(ppd); /* on link down, ensure sane pcs state */ qib_7322_mini_pcs_reset(ppd); + /* schedule the qsfp refresh which should turn the link + off */ + if (ppd->dd->flags & QIB_HAS_QSFP) { + qd->t_insert = get_jiffies_64(); + schedule_work(&qd->work); + } spin_lock_irqsave(&ppd->sdma_lock, flags); if (__qib_sdma_running(ppd)) __qib_sdma_process_event(ppd, @@ -5588,43 +5593,79 @@ static void qsfp_7322_event(struct work_struct *work) struct qib_qsfp_data *qd; struct qib_pportdata *ppd; u64 pwrup; + unsigned long flags; int ret; u32 le2; qd = container_of(work, struct qib_qsfp_data, work); ppd = qd->ppd; - pwrup = qd->t_insert + msecs_to_jiffies(QSFP_PWR_LAG_MSEC); + pwrup = qd->t_insert + + msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC); - /* - * Some QSFP's not only do not respond until the full power-up - * time, but may behave badly if we try. So hold off responding - * to insertion. - */ - while (1) { - u64 now = get_jiffies_64(); - if (time_after64(now, pwrup)) - break; - msleep(20); - } - ret = qib_refresh_qsfp_cache(ppd, &qd->cache); - /* - * Need to change LE2 back to defaults if we couldn't - * read the cable type (to handle cable swaps), so do this - * even on failure to read cable information. We don't - * get here for QME, so IS_QME check not needed here. - */ - if (!ret && !ppd->dd->cspec->r1) { - if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) - le2 = LE2_QME; - else if (qd->cache.atten[1] >= qib_long_atten && - QSFP_IS_CU(qd->cache.tech)) - le2 = LE2_5m; - else + /* Delay for 20 msecs to allow ModPrs resistor to setup */ + mdelay(QSFP_MODPRS_LAG_MSEC); + + if (!qib_qsfp_mod_present(ppd)) { + ppd->cpspec->qsfp_data.modpresent = 0; + /* Set the physical link to disabled */ + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_LINKV; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } else { + /* + * Some QSFP's not only do not respond until the full power-up + * time, but may behave badly if we try. So hold off responding + * to insertion. + */ + while (1) { + u64 now = get_jiffies_64(); + if (time_after64(now, pwrup)) + break; + msleep(20); + } + + ret = qib_refresh_qsfp_cache(ppd, &qd->cache); + + /* + * Need to change LE2 back to defaults if we couldn't + * read the cable type (to handle cable swaps), so do this + * even on failure to read cable information. We don't + * get here for QME, so IS_QME check not needed here. + */ + if (!ret && !ppd->dd->cspec->r1) { + if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) + le2 = LE2_QME; + else if (qd->cache.atten[1] >= qib_long_atten && + QSFP_IS_CU(qd->cache.tech)) + le2 = LE2_5m; + else + le2 = LE2_DEFAULT; + } else le2 = LE2_DEFAULT; - } else - le2 = LE2_DEFAULT; - ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); - init_txdds_table(ppd, 0); + ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); + /* + * We always change parameteters, since we can choose + * values for cables without eeproms, and the cable may have + * changed from a cable with full or partial eeprom content + * to one with partial or no content. + */ + init_txdds_table(ppd, 0); + /* The physical link is being re-enabled only when the + * previous state was DISABLED and the VALID bit is not + * set. This should only happen when the cable has been + * physically pulled. */ + if (!ppd->cpspec->qsfp_data.modpresent && + (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) { + ppd->cpspec->qsfp_data.modpresent = 1; + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_LINKV; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } + } } /* @@ -5728,7 +5769,8 @@ static void set_no_qsfp_atten(struct qib_devdata *dd, int change) /* now change the IBC and serdes, overriding generic */ init_txdds_table(ppd, 1); /* Re-enable the physical state machine on mezz boards - * now that the correct settings have been set. */ + * now that the correct settings have been set. + * QSFP boards are handles by the QSFP event handler */ if (IS_QMH(dd) || IS_QME(dd)) qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); @@ -6206,6 +6248,8 @@ static int qib_init_7322_variables(struct qib_devdata *dd) /* we always allocate at least 2048 bytes for eager buffers */ dd->rcvegrbufsize = max(mtu, 2048); + BUG_ON(!is_power_of_2(dd->rcvegrbufsize)); + dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize); qib_7322_tidtemplate(dd); @@ -7148,7 +7192,8 @@ static void find_best_ent(struct qib_pportdata *ppd, } } - /* Lookup serdes setting by cable type and attenuation */ + /* Active cables don't have attenuation so we only set SERDES + * settings to account for the attenuation of the board traces. */ if (!override && QSFP_IS_ACTIVE(qd->tech)) { *sdr_dds = txdds_sdr + ppd->dd->board_atten; *ddr_dds = txdds_ddr + ppd->dd->board_atten; @@ -7465,12 +7510,6 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd) u32 le_val, rxcaldone; int chan, chan_done = (1 << SERDES_CHANS) - 1; - /* - * Initialize the Tx DDS tables. Also done every QSFP event, - * for adapters with QSFP - */ - init_txdds_table(ppd, 0); - /* Clear cmode-override, may be set from older driver */ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); @@ -7656,6 +7695,12 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd) /* VGA output common mode */ ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2)); + /* + * Initialize the Tx DDS tables. Also done every QSFP event, + * for adapters with QSFP + */ + init_txdds_table(ppd, 0); + return 0; } |