1 files changed, 136 insertions, 33 deletions

diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
index 7fd766ec64c8..637d02634527 100644
--- a/drivers/media/i2c/saa7115.c
+++ b/drivers/media/i2c/saa7115.c
@@ -225,19 +225,63 @@ static const unsigned char saa7111_init[] = {
 	0x00, 0x00
 };
 
-/* SAA7113/GM7113C init codes
- * It's important that R_14... R_17 == 0x00
- * for the gm7113c chip to deliver stable video
+/*
+ * This table has one illegal value, and some values that are not
+ * correct according to the datasheet initialization table.
+ *
+ *  If you need a table with legal/default values tell the driver in
+ *  i2c_board_info.platform_data, and you will get the gm7113c_init
+ *  table instead.
  */
+
+/* SAA7113 Init codes */
 static const unsigned char saa7113_init[] = {
 	R_01_INC_DELAY, 0x08,
 	R_02_INPUT_CNTL_1, 0xc2,
 	R_03_INPUT_CNTL_2, 0x30,
 	R_04_INPUT_CNTL_3, 0x00,
 	R_05_INPUT_CNTL_4, 0x00,
-	R_06_H_SYNC_START, 0x89,
+	R_06_H_SYNC_START, 0x89,	/* Illegal value -119,
+					 * min. value = -108 (0x94) */
+	R_07_H_SYNC_STOP, 0x0d,
+	R_08_SYNC_CNTL, 0x88,		/* Not datasheet default.
+					 * HTC = VTR mode, should be 0x98 */
+	R_09_LUMA_CNTL, 0x01,
+	R_0A_LUMA_BRIGHT_CNTL, 0x80,
+	R_0B_LUMA_CONTRAST_CNTL, 0x47,
+	R_0C_CHROMA_SAT_CNTL, 0x40,
+	R_0D_CHROMA_HUE_CNTL, 0x00,
+	R_0E_CHROMA_CNTL_1, 0x01,
+	R_0F_CHROMA_GAIN_CNTL, 0x2a,
+	R_10_CHROMA_CNTL_2, 0x08,	/* Not datsheet default.
+					 * VRLN enabled, should be 0x00 */
+	R_11_MODE_DELAY_CNTL, 0x0c,
+	R_12_RT_SIGNAL_CNTL, 0x07,	/* Not datasheet default,
+					 * should be 0x01 */
+	R_13_RT_X_PORT_OUT_CNTL, 0x00,
+	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
+	R_15_VGATE_START_FID_CHG, 0x00,
+	R_16_VGATE_STOP, 0x00,
+	R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
+
+	0x00, 0x00
+};
+
+/*
+ * GM7113C is a clone of the SAA7113 chip
+ *  This init table is copied out of the saa7113 datasheet.
+ *  In R_08 we enable "Automatic Field Detection" [AUFD],
+ *  this is disabled when saa711x_set_v4lstd is called.
+ */
+static const unsigned char gm7113c_init[] = {
+	R_01_INC_DELAY, 0x08,
+	R_02_INPUT_CNTL_1, 0xc0,
+	R_03_INPUT_CNTL_2, 0x33,
+	R_04_INPUT_CNTL_3, 0x00,
+	R_05_INPUT_CNTL_4, 0x00,
+	R_06_H_SYNC_START, 0xe9,
 	R_07_H_SYNC_STOP, 0x0d,
-	R_08_SYNC_CNTL, 0x88,
+	R_08_SYNC_CNTL, 0x98,
 	R_09_LUMA_CNTL, 0x01,
 	R_0A_LUMA_BRIGHT_CNTL, 0x80,
 	R_0B_LUMA_CONTRAST_CNTL, 0x47,
@@ -245,9 +289,9 @@ static const unsigned char saa7113_init[] = {
 	R_0D_CHROMA_HUE_CNTL, 0x00,
 	R_0E_CHROMA_CNTL_1, 0x01,
 	R_0F_CHROMA_GAIN_CNTL, 0x2a,
-	R_10_CHROMA_CNTL_2, 0x08,
+	R_10_CHROMA_CNTL_2, 0x00,
 	R_11_MODE_DELAY_CNTL, 0x0c,
-	R_12_RT_SIGNAL_CNTL, 0x07,
+	R_12_RT_SIGNAL_CNTL, 0x01,
 	R_13_RT_X_PORT_OUT_CNTL, 0x00,
 	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
 	R_15_VGATE_START_FID_CHG, 0x00,
@@ -462,24 +506,6 @@ static const unsigned char saa7115_cfg_50hz_video[] = {
 
 /* ============== SAA7715 VIDEO templates (end) =======  */
 
-/* ============== GM7113C VIDEO templates =============  */
-static const unsigned char gm7113c_cfg_60hz_video[] = {
-	R_08_SYNC_CNTL, 0x68,			/* 0xBO: auto detection, 0x68 = NTSC */
-	R_0E_CHROMA_CNTL_1, 0x07,		/* video autodetection is on */
-
-	0x00, 0x00
-};
-
-static const unsigned char gm7113c_cfg_50hz_video[] = {
-	R_08_SYNC_CNTL, 0x28,			/* 0x28 = PAL */
-	R_0E_CHROMA_CNTL_1, 0x07,
-
-	0x00, 0x00
-};
-
-/* ============== GM7113C VIDEO templates (end) =======  */
-
-
 static const unsigned char saa7115_cfg_vbi_on[] = {
 	R_80_GLOBAL_CNTL_1, 0x00,			/* reset tasks */
 	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,		/* reset scaler */
@@ -964,17 +990,24 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std)
 	// This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
 	if (std & V4L2_STD_525_60) {
 		v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n");
-		if (state->ident == GM7113C)
-			saa711x_writeregs(sd, gm7113c_cfg_60hz_video);
-		else
+		if (state->ident == GM7113C) {
+			u8 reg = saa711x_read(sd, R_08_SYNC_CNTL);
+			reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD);
+			reg |= SAA7113_R_08_FSEL;
+			saa711x_write(sd, R_08_SYNC_CNTL, reg);
+		} else {
 			saa711x_writeregs(sd, saa7115_cfg_60hz_video);
+		}
 		saa711x_set_size(sd, 720, 480);
 	} else {
 		v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n");
-		if (state->ident == GM7113C)
-			saa711x_writeregs(sd, gm7113c_cfg_50hz_video);
-		else
+		if (state->ident == GM7113C) {
+			u8 reg = saa711x_read(sd, R_08_SYNC_CNTL);
+			reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD);
+			saa711x_write(sd, R_08_SYNC_CNTL, reg);
+		} else {
 			saa711x_writeregs(sd, saa7115_cfg_50hz_video);
+		}
 		saa711x_set_size(sd, 720, 576);
 	}
 
@@ -1596,6 +1629,65 @@ static const struct v4l2_subdev_ops saa711x_ops = {
 
 /* ----------------------------------------------------------------------- */
 
+static void saa711x_write_platform_data(struct saa711x_state *state,
+					struct saa7115_platform_data *data)
+{
+	struct v4l2_subdev *sd = &state->sd;
+	u8 work;
+
+	if (state->ident != GM7113C &&
+	    state->ident != SAA7113)
+		return;
+
+	if (data->saa7113_r08_htc) {
+		work = saa711x_read(sd, R_08_SYNC_CNTL);
+		work &= ~SAA7113_R_08_HTC_MASK;
+		work |= ((*data->saa7113_r08_htc) << SAA7113_R_08_HTC_OFFSET);
+		saa711x_write(sd, R_08_SYNC_CNTL, work);
+	}
+
+	if (data->saa7113_r10_vrln) {
+		work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
+		work &= ~SAA7113_R_10_VRLN_MASK;
+		if (*data->saa7113_r10_vrln)
+			work |= (1 << SAA7113_R_10_VRLN_OFFSET);
+		saa711x_write(sd, R_10_CHROMA_CNTL_2, work);
+	}
+
+	if (data->saa7113_r10_ofts) {
+		work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
+		work &= ~SAA7113_R_10_OFTS_MASK;
+		work |= (*data->saa7113_r10_ofts << SAA7113_R_10_OFTS_OFFSET);
+		saa711x_write(sd, R_10_CHROMA_CNTL_2, work);
+	}
+
+	if (data->saa7113_r12_rts0) {
+		work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
+		work &= ~SAA7113_R_12_RTS0_MASK;
+		work |= (*data->saa7113_r12_rts0 << SAA7113_R_12_RTS0_OFFSET);
+
+		/* According to the datasheet,
+		 * SAA7113_RTS_DOT_IN should only be used on RTS1 */
+		WARN_ON(*data->saa7113_r12_rts0 == SAA7113_RTS_DOT_IN);
+		saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work);
+	}
+
+	if (data->saa7113_r12_rts1) {
+		work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
+		work &= ~SAA7113_R_12_RTS1_MASK;
+		work |= (*data->saa7113_r12_rts1 << SAA7113_R_12_RTS1_OFFSET);
+		saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work);
+	}
+
+	if (data->saa7113_r13_adlsb) {
+		work = saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL);
+		work &= ~SAA7113_R_13_ADLSB_MASK;
+		if (*data->saa7113_r13_adlsb)
+			work |= (1 << SAA7113_R_13_ADLSB_OFFSET);
+		saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, work);
+	}
+}
+
 /**
  * saa711x_detect_chip - Detects the saa711x (or clone) variant
  * @client:		I2C client structure.
@@ -1704,6 +1796,7 @@ static int saa711x_probe(struct i2c_client *client,
 	struct saa711x_state *state;
 	struct v4l2_subdev *sd;
 	struct v4l2_ctrl_handler *hdl;
+	struct saa7115_platform_data *pdata;
 	int ident;
 	char name[CHIP_VER_SIZE + 1];
 
@@ -1767,21 +1860,31 @@ static int saa711x_probe(struct i2c_client *client,
 
 	/* init to 60hz/48khz */
 	state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
+	pdata = client->dev.platform_data;
 	switch (state->ident) {
 	case SAA7111:
 	case SAA7111A:
 		saa711x_writeregs(sd, saa7111_init);
 		break;
 	case GM7113C:
+		saa711x_writeregs(sd, gm7113c_init);
+		break;
 	case SAA7113:
-		saa711x_writeregs(sd, saa7113_init);
+		if (pdata && pdata->saa7113_force_gm7113c_init)
+			saa711x_writeregs(sd, gm7113c_init);
+		else
+			saa711x_writeregs(sd, saa7113_init);
 		break;
 	default:
 		state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
 		saa711x_writeregs(sd, saa7115_init_auto_input);
 	}
-	if (state->ident > SAA7111A)
+	if (state->ident > SAA7111A && state->ident != GM7113C)
 		saa711x_writeregs(sd, saa7115_init_misc);
+
+	if (pdata)
+		saa711x_write_platform_data(state, pdata);
+
 	saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
 	v4l2_ctrl_handler_setup(hdl);