diff options
Diffstat (limited to 'drivers/misc/eeprom')
-rw-r--r-- | drivers/misc/eeprom/at24.c | 48 | ||||
-rw-r--r-- | drivers/misc/eeprom/ee1004.c | 113 |
2 files changed, 118 insertions, 43 deletions
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index f61a80597a22..572333ead5fb 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/nvmem-provider.h> +#include <linux/of.h> #include <linux/of_device.h> #include <linux/pm_runtime.h> #include <linux/property.h> @@ -242,7 +243,7 @@ static const struct i2c_device_id at24_ids[] = { }; MODULE_DEVICE_TABLE(i2c, at24_ids); -static const struct of_device_id at24_of_match[] = { +static const struct of_device_id __maybe_unused at24_of_match[] = { { .compatible = "atmel,24c00", .data = &at24_data_24c00 }, { .compatible = "atmel,24c01", .data = &at24_data_24c01 }, { .compatible = "atmel,24cs01", .data = &at24_data_24cs01 }, @@ -439,12 +440,9 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) if (off + count > at24->byte_len) return -EINVAL; - ret = pm_runtime_get_sync(dev); - if (ret < 0) { - pm_runtime_put_noidle(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret) return ret; - } - /* * Read data from chip, protecting against concurrent updates * from this host, but not from other I2C masters. @@ -486,12 +484,9 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) if (off + count > at24->byte_len) return -EINVAL; - ret = pm_runtime_get_sync(dev); - if (ret < 0) { - pm_runtime_put_noidle(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret) return ret; - } - /* * Write data to chip, protecting against concurrent updates * from this host, but not from other I2C masters. @@ -563,6 +558,31 @@ static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len) } } +static void at24_probe_temp_sensor(struct i2c_client *client) +{ + struct at24_data *at24 = i2c_get_clientdata(client); + struct i2c_board_info info = { .type = "jc42" }; + int ret; + u8 val; + + /* + * Byte 2 has value 11 for DDR3, earlier versions don't + * support the thermal sensor present flag + */ + ret = at24_read(at24, 2, &val, 1); + if (ret || val != 11) + return; + + /* Byte 32, bit 7 is set if temp sensor is present */ + ret = at24_read(at24, 32, &val, 1); + if (ret || !(val & BIT(7))) + return; + + info.addr = 0x18 | (client->addr & 7); + + i2c_new_client_device(client->adapter, &info); +} + static int at24_probe(struct i2c_client *client) { struct regmap_config regmap_config = { }; @@ -762,6 +782,10 @@ static int at24_probe(struct i2c_client *client) } } + /* If this a SPD EEPROM, probe for DDR3 thermal sensor */ + if (cdata == &at24_data_spd) + at24_probe_temp_sensor(client); + pm_runtime_idle(dev); if (writable) @@ -812,7 +836,7 @@ static struct i2c_driver at24_driver = { .driver = { .name = "at24", .pm = &at24_pm_ops, - .of_match_table = at24_of_match, + .of_match_table = of_match_ptr(at24_of_match), .acpi_match_table = ACPI_PTR(at24_acpi_ids), }, .probe = at24_probe, diff --git a/drivers/misc/eeprom/ee1004.c b/drivers/misc/eeprom/ee1004.c index a1acd77130f2..21feebc3044c 100644 --- a/drivers/misc/eeprom/ee1004.c +++ b/drivers/misc/eeprom/ee1004.c @@ -31,6 +31,7 @@ * over performance. */ +#define EE1004_MAX_BUSSES 8 #define EE1004_ADDR_SET_PAGE 0x36 #define EE1004_NUM_PAGES 2 #define EE1004_PAGE_SIZE 256 @@ -42,9 +43,13 @@ * from page selection to end of read. */ static DEFINE_MUTEX(ee1004_bus_lock); -static struct i2c_client *ee1004_set_page[EE1004_NUM_PAGES]; -static unsigned int ee1004_dev_count; -static int ee1004_current_page; + +static struct ee1004_bus_data { + struct i2c_adapter *adap; + struct i2c_client *set_page[EE1004_NUM_PAGES]; + unsigned int dev_count; + int current_page; +} ee1004_bus_data[EE1004_MAX_BUSSES]; static const struct i2c_device_id ee1004_ids[] = { { "ee1004", 0 }, @@ -54,11 +59,29 @@ MODULE_DEVICE_TABLE(i2c, ee1004_ids); /*-------------------------------------------------------------------------*/ -static int ee1004_get_current_page(void) +static struct ee1004_bus_data *ee1004_get_bus_data(struct i2c_adapter *adap) +{ + int i; + + for (i = 0; i < EE1004_MAX_BUSSES; i++) + if (ee1004_bus_data[i].adap == adap) + return ee1004_bus_data + i; + + /* If not existent yet, create new entry */ + for (i = 0; i < EE1004_MAX_BUSSES; i++) + if (!ee1004_bus_data[i].adap) { + ee1004_bus_data[i].adap = adap; + return ee1004_bus_data + i; + } + + return NULL; +} + +static int ee1004_get_current_page(struct ee1004_bus_data *bd) { int err; - err = i2c_smbus_read_byte(ee1004_set_page[0]); + err = i2c_smbus_read_byte(bd->set_page[0]); if (err == -ENXIO) { /* Nack means page 1 is selected */ return 1; @@ -72,28 +95,29 @@ static int ee1004_get_current_page(void) return 0; } -static int ee1004_set_current_page(struct device *dev, int page) +static int ee1004_set_current_page(struct i2c_client *client, int page) { + struct ee1004_bus_data *bd = i2c_get_clientdata(client); int ret; - if (page == ee1004_current_page) + if (page == bd->current_page) return 0; /* Data is ignored */ - ret = i2c_smbus_write_byte(ee1004_set_page[page], 0x00); + ret = i2c_smbus_write_byte(bd->set_page[page], 0x00); /* * Don't give up just yet. Some memory modules will select the page * but not ack the command. Check which page is selected now. */ - if (ret == -ENXIO && ee1004_get_current_page() == page) + if (ret == -ENXIO && ee1004_get_current_page(bd) == page) ret = 0; if (ret < 0) { - dev_err(dev, "Failed to select page %d (%d)\n", page, ret); + dev_err(&client->dev, "Failed to select page %d (%d)\n", page, ret); return ret; } - dev_dbg(dev, "Selected page %d\n", page); - ee1004_current_page = page; + dev_dbg(&client->dev, "Selected page %d\n", page); + bd->current_page = page; return 0; } @@ -106,7 +130,7 @@ static ssize_t ee1004_eeprom_read(struct i2c_client *client, char *buf, page = offset >> EE1004_PAGE_SHIFT; offset &= (1 << EE1004_PAGE_SHIFT) - 1; - status = ee1004_set_current_page(&client->dev, page); + status = ee1004_set_current_page(client, page); if (status) return status; @@ -158,17 +182,34 @@ static struct bin_attribute *ee1004_attrs[] = { BIN_ATTRIBUTE_GROUPS(ee1004); -static void ee1004_cleanup(int idx) +static void ee1004_probe_temp_sensor(struct i2c_client *client) { - if (--ee1004_dev_count == 0) - while (--idx >= 0) { - i2c_unregister_device(ee1004_set_page[idx]); - ee1004_set_page[idx] = NULL; - } + struct i2c_board_info info = { .type = "jc42" }; + u8 byte14; + int ret; + + /* byte 14, bit 7 is set if temp sensor is present */ + ret = ee1004_eeprom_read(client, &byte14, 14, 1); + if (ret != 1 || !(byte14 & BIT(7))) + return; + + info.addr = 0x18 | (client->addr & 7); + + i2c_new_client_device(client->adapter, &info); +} + +static void ee1004_cleanup(int idx, struct ee1004_bus_data *bd) +{ + if (--bd->dev_count == 0) { + while (--idx >= 0) + i2c_unregister_device(bd->set_page[idx]); + memset(bd, 0, sizeof(struct ee1004_bus_data)); + } } static int ee1004_probe(struct i2c_client *client) { + struct ee1004_bus_data *bd; int err, cnr = 0; /* Make sure we can operate on this adapter */ @@ -178,9 +219,19 @@ static int ee1004_probe(struct i2c_client *client) I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_READ_BYTE_DATA)) return -EPFNOSUPPORT; - /* Use 2 dummy devices for page select command */ mutex_lock(&ee1004_bus_lock); - if (++ee1004_dev_count == 1) { + + bd = ee1004_get_bus_data(client->adapter); + if (!bd) { + mutex_unlock(&ee1004_bus_lock); + return dev_err_probe(&client->dev, -ENOSPC, + "Only %d busses supported", EE1004_MAX_BUSSES); + } + + i2c_set_clientdata(client, bd); + + if (++bd->dev_count == 1) { + /* Use 2 dummy devices for page select command */ for (cnr = 0; cnr < EE1004_NUM_PAGES; cnr++) { struct i2c_client *cl; @@ -189,21 +240,19 @@ static int ee1004_probe(struct i2c_client *client) err = PTR_ERR(cl); goto err_clients; } - ee1004_set_page[cnr] = cl; + bd->set_page[cnr] = cl; } /* Remember current page to avoid unneeded page select */ - err = ee1004_get_current_page(); + err = ee1004_get_current_page(bd); if (err < 0) goto err_clients; dev_dbg(&client->dev, "Currently selected page: %d\n", err); - ee1004_current_page = err; - } else if (client->adapter != ee1004_set_page[0]->adapter) { - dev_err(&client->dev, - "Driver only supports devices on a single I2C bus\n"); - err = -EOPNOTSUPP; - goto err_clients; + bd->current_page = err; } + + ee1004_probe_temp_sensor(client); + mutex_unlock(&ee1004_bus_lock); dev_info(&client->dev, @@ -213,7 +262,7 @@ static int ee1004_probe(struct i2c_client *client) return 0; err_clients: - ee1004_cleanup(cnr); + ee1004_cleanup(cnr, bd); mutex_unlock(&ee1004_bus_lock); return err; @@ -221,9 +270,11 @@ static int ee1004_probe(struct i2c_client *client) static void ee1004_remove(struct i2c_client *client) { + struct ee1004_bus_data *bd = i2c_get_clientdata(client); + /* Remove page select clients if this is the last device */ mutex_lock(&ee1004_bus_lock); - ee1004_cleanup(EE1004_NUM_PAGES); + ee1004_cleanup(EE1004_NUM_PAGES, bd); mutex_unlock(&ee1004_bus_lock); } |