summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/mmci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/mmci.c')
-rw-r--r--drivers/mmc/host/mmci.c165
1 files changed, 126 insertions, 39 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index f4f3038c1df0..c3785edc0e92 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -61,6 +61,7 @@ static unsigned int fmax = 515633;
* @pwrreg_powerup: power up value for MMCIPOWER register
* @signal_direction: input/out direction of bus signals can be indicated
* @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
+ * @busy_detect: true if busy detection on dat0 is supported
*/
struct variant_data {
unsigned int clkreg;
@@ -74,6 +75,7 @@ struct variant_data {
u32 pwrreg_powerup;
bool signal_direction;
bool pwrreg_clkgate;
+ bool busy_detect;
};
static struct variant_data variant_arm = {
@@ -132,6 +134,7 @@ static struct variant_data variant_ux500 = {
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
.pwrreg_clkgate = true,
+ .busy_detect = true,
};
static struct variant_data variant_ux500v2 = {
@@ -146,8 +149,28 @@ static struct variant_data variant_ux500v2 = {
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
.pwrreg_clkgate = true,
+ .busy_detect = true,
};
+static int mmci_card_busy(struct mmc_host *mmc)
+{
+ struct mmci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+ int busy = 0;
+
+ pm_runtime_get_sync(mmc_dev(mmc));
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (readl(host->base + MMCISTATUS) & MCI_ST_CARDBUSY)
+ busy = 1;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ pm_runtime_mark_last_busy(mmc_dev(mmc));
+ pm_runtime_put_autosuspend(mmc_dev(mmc));
+
+ return busy;
+}
+
/*
* Validate mmc prerequisites
*/
@@ -191,11 +214,28 @@ static void mmci_write_pwrreg(struct mmci_host *host, u32 pwr)
/*
* This must be called with host->lock held
*/
+static void mmci_write_datactrlreg(struct mmci_host *host, u32 datactrl)
+{
+ /* Keep ST Micro busy mode if enabled */
+ datactrl |= host->datactrl_reg & MCI_ST_DPSM_BUSYMODE;
+
+ if (host->datactrl_reg != datactrl) {
+ host->datactrl_reg = datactrl;
+ writel(datactrl, host->base + MMCIDATACTRL);
+ }
+}
+
+/*
+ * This must be called with host->lock held
+ */
static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
{
struct variant_data *variant = host->variant;
u32 clk = variant->clkreg;
+ /* Make sure cclk reflects the current calculated clock */
+ host->cclk = 0;
+
if (desired) {
if (desired >= host->mclk) {
clk = MCI_CLK_BYPASS;
@@ -230,6 +270,9 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
/* clk |= MCI_CLK_PWRSAVE; */
}
+ /* Set actual clock for debug */
+ host->mmc->actual_clock = host->cclk;
+
if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4)
clk |= MCI_4BIT_BUS;
if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8)
@@ -275,7 +318,7 @@ static void mmci_set_mask1(struct mmci_host *host, unsigned int mask)
static void mmci_stop_data(struct mmci_host *host)
{
- writel(0, host->base + MMCIDATACTRL);
+ mmci_write_datactrlreg(host, 0);
mmci_set_mask1(host, 0);
host->data = NULL;
}
@@ -304,10 +347,8 @@ static void mmci_dma_setup(struct mmci_host *host)
const char *rxname, *txname;
dma_cap_mask_t mask;
- if (!plat || !plat->dma_filter) {
- dev_info(mmc_dev(host->mmc), "no DMA platform data\n");
- return;
- }
+ host->dma_rx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "rx");
+ host->dma_tx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "tx");
/* initialize pre request cookie */
host->next_data.cookie = 1;
@@ -316,30 +357,33 @@ static void mmci_dma_setup(struct mmci_host *host)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- /*
- * If only an RX channel is specified, the driver will
- * attempt to use it bidirectionally, however if it is
- * is specified but cannot be located, DMA will be disabled.
- */
- if (plat->dma_rx_param) {
- host->dma_rx_channel = dma_request_channel(mask,
+ if (plat && plat->dma_filter) {
+ if (!host->dma_rx_channel && plat->dma_rx_param) {
+ host->dma_rx_channel = dma_request_channel(mask,
plat->dma_filter,
plat->dma_rx_param);
- /* E.g if no DMA hardware is present */
- if (!host->dma_rx_channel)
- dev_err(mmc_dev(host->mmc), "no RX DMA channel\n");
- }
+ /* E.g if no DMA hardware is present */
+ if (!host->dma_rx_channel)
+ dev_err(mmc_dev(host->mmc), "no RX DMA channel\n");
+ }
- if (plat->dma_tx_param) {
- host->dma_tx_channel = dma_request_channel(mask,
+ if (!host->dma_tx_channel && plat->dma_tx_param) {
+ host->dma_tx_channel = dma_request_channel(mask,
plat->dma_filter,
plat->dma_tx_param);
- if (!host->dma_tx_channel)
- dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n");
- } else {
- host->dma_tx_channel = host->dma_rx_channel;
+ if (!host->dma_tx_channel)
+ dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n");
+ }
}
+ /*
+ * If only an RX channel is specified, the driver will
+ * attempt to use it bidirectionally, however if it is
+ * is specified but cannot be located, DMA will be disabled.
+ */
+ if (host->dma_rx_channel && !host->dma_tx_channel)
+ host->dma_tx_channel = host->dma_rx_channel;
+
if (host->dma_rx_channel)
rxname = dma_chan_name(host->dma_rx_channel);
else
@@ -552,7 +596,7 @@ static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
datactrl |= MCI_DPSM_DMAENABLE;
/* Trigger the DMA transfer */
- writel(datactrl, host->base + MMCIDATACTRL);
+ mmci_write_datactrlreg(host, datactrl);
/*
* Let the MMCI say when the data is ended and it's time
@@ -750,7 +794,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
irqmask = MCI_TXFIFOHALFEMPTYMASK;
}
- writel(datactrl, base + MMCIDATACTRL);
+ mmci_write_datactrlreg(host, datactrl);
writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0);
mmci_set_mask1(host, irqmask);
}
@@ -842,7 +886,7 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
/* The error clause is handled above, success! */
data->bytes_xfered = data->blksz * data->blocks;
- if (!data->stop) {
+ if (!data->stop || host->mrq->sbc) {
mmci_request_end(host, data->mrq);
} else {
mmci_start_command(host, data->stop, 0);
@@ -855,6 +899,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
unsigned int status)
{
void __iomem *base = host->base;
+ bool sbc = (cmd == host->mrq->sbc);
host->cmd = NULL;
@@ -869,7 +914,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
cmd->resp[3] = readl(base + MMCIRESPONSE3);
}
- if (!cmd->data || cmd->error) {
+ if ((!sbc && !cmd->data) || cmd->error) {
if (host->data) {
/* Terminate the DMA transfer */
if (dma_inprogress(host)) {
@@ -878,7 +923,9 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
}
mmci_stop_data(host);
}
- mmci_request_end(host, cmd->mrq);
+ mmci_request_end(host, host->mrq);
+ } else if (sbc) {
+ mmci_start_command(host, host->mrq->cmd, 0);
} else if (!(cmd->data->flags & MMC_DATA_READ)) {
mmci_start_data(host, cmd->data);
}
@@ -1119,7 +1166,10 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
if (mrq->data && mrq->data->flags & MMC_DATA_READ)
mmci_start_data(host, mrq->data);
- mmci_start_command(host, mrq->cmd, 0);
+ if (mrq->sbc)
+ mmci_start_command(host, mrq->sbc, 0);
+ else
+ mmci_start_command(host, mrq->cmd, 0);
spin_unlock_irqrestore(&host->lock, flags);
}
@@ -1143,9 +1193,10 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
- if (!IS_ERR(mmc->supply.vqmmc) &&
- regulator_is_enabled(mmc->supply.vqmmc))
+ if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
regulator_disable(mmc->supply.vqmmc);
+ host->vqmmc_enabled = false;
+ }
break;
case MMC_POWER_UP:
@@ -1161,12 +1212,13 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
break;
case MMC_POWER_ON:
- if (!IS_ERR(mmc->supply.vqmmc) &&
- !regulator_is_enabled(mmc->supply.vqmmc)) {
+ if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
ret = regulator_enable(mmc->supply.vqmmc);
if (ret < 0)
dev_err(mmc_dev(mmc),
"failed to enable vqmmc regulator\n");
+ else
+ host->vqmmc_enabled = true;
}
pwr |= MCI_PWR_ON;
@@ -1251,6 +1303,39 @@ static int mmci_get_cd(struct mmc_host *mmc)
return status;
}
+static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ int ret = 0;
+
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+
+ pm_runtime_get_sync(mmc_dev(mmc));
+
+ switch (ios->signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_330:
+ ret = regulator_set_voltage(mmc->supply.vqmmc,
+ 2700000, 3600000);
+ break;
+ case MMC_SIGNAL_VOLTAGE_180:
+ ret = regulator_set_voltage(mmc->supply.vqmmc,
+ 1700000, 1950000);
+ break;
+ case MMC_SIGNAL_VOLTAGE_120:
+ ret = regulator_set_voltage(mmc->supply.vqmmc,
+ 1100000, 1300000);
+ break;
+ }
+
+ if (ret)
+ dev_warn(mmc_dev(mmc), "Voltage switch failed\n");
+
+ pm_runtime_mark_last_busy(mmc_dev(mmc));
+ pm_runtime_put_autosuspend(mmc_dev(mmc));
+ }
+
+ return ret;
+}
+
static irqreturn_t mmci_cd_irq(int irq, void *dev_id)
{
struct mmci_host *host = dev_id;
@@ -1260,13 +1345,14 @@ static irqreturn_t mmci_cd_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static const struct mmc_host_ops mmci_ops = {
+static struct mmc_host_ops mmci_ops = {
.request = mmci_request,
.pre_req = mmci_pre_request,
.post_req = mmci_post_request,
.set_ios = mmci_set_ios,
.get_ro = mmci_get_ro,
.get_cd = mmci_get_cd,
+ .start_signal_voltage_switch = mmci_sig_volt_switch,
};
#ifdef CONFIG_OF
@@ -1362,16 +1448,15 @@ static int mmci_probe(struct amba_device *dev,
dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision);
- host->clk = clk_get(&dev->dev, NULL);
+ host->clk = devm_clk_get(&dev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
- host->clk = NULL;
goto host_free;
}
ret = clk_prepare_enable(host->clk);
if (ret)
- goto clk_free;
+ goto host_free;
host->plat = plat;
host->variant = variant;
@@ -1396,6 +1481,11 @@ static int mmci_probe(struct amba_device *dev,
goto clk_disable;
}
+ if (variant->busy_detect) {
+ mmci_ops.card_busy = mmci_card_busy;
+ mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE);
+ }
+
mmc->ops = &mmci_ops;
/*
* The ARM and ST versions of the block have slightly different
@@ -1576,8 +1666,6 @@ static int mmci_probe(struct amba_device *dev,
iounmap(host->base);
clk_disable:
clk_disable_unprepare(host->clk);
- clk_free:
- clk_put(host->clk);
host_free:
mmc_free_host(mmc);
rel_regions:
@@ -1623,7 +1711,6 @@ static int mmci_remove(struct amba_device *dev)
iounmap(host->base);
clk_disable_unprepare(host->clk);
- clk_put(host->clk);
mmc_free_host(mmc);