summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/fsl_elbc_nand.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/raw/fsl_elbc_nand.c')
-rw-r--r--drivers/mtd/nand/raw/fsl_elbc_nand.c20
1 files changed, 10 insertions, 10 deletions
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 088692b2e27a..b2af7f81fdf8 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -244,7 +244,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
return -EIO;
}
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
elbc_fcm_ctrl->max_bitflips = 0;
@@ -727,12 +727,12 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
unsigned int al;
- switch (chip->ecc.mode) {
+ switch (chip->ecc.engine_type) {
/*
* if ECC was not chosen in DT, decide whether to use HW or SW ECC from
* CS Base Register
*/
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
/* If CS Base Register selects full hardware ECC then use it */
if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
BR_DECC_CHK_GEN) {
@@ -740,23 +740,23 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
chip->ecc.write_page = fsl_elbc_write_page;
chip->ecc.write_subpage = fsl_elbc_write_subpage;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
} else {
/* otherwise fall back to default software ECC */
- chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
break;
/* if SW ECC was chosen in DT, we do not need to set anything here */
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
- /* should we also implement NAND_ECC_HW to do as the code above? */
+ /* should we also implement *_ECC_ENGINE_CONTROLLER to do as above? */
default:
return -EINVAL;
}
@@ -786,8 +786,8 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
chip->page_shift);
dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
chip->phys_erase_shift);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
- chip->ecc.mode);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.engine_type = %d\n",
+ chip->ecc.engine_type);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
chip->ecc.steps);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",