diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz9477.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 79 |
1 files changed, 79 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 83b7f2d5c1ea..cde8ef33d029 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -1004,6 +1004,8 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) /* clear pending interrupts */ if (dev->info->internal_phy[port]) ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); + + ksz9477_port_acl_init(dev, port); } void ksz9477_config_cpu_port(struct dsa_switch *ds) @@ -1141,6 +1143,83 @@ int ksz9477_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val) return ksz_pwrite16(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val); } +/* The KSZ9477 provides following HW features to accelerate + * HSR frames handling: + * + * 1. TX PACKET DUPLICATION FROM HOST TO SWITCH + * 2. RX PACKET DUPLICATION DISCARDING + * 3. PREVENTING PACKET LOOP IN THE RING BY SELF-ADDRESS FILTERING + * + * Only one from point 1. has the NETIF_F* flag available. + * + * Ones from point 2 and 3 are "best effort" - i.e. those will + * work correctly most of the time, but it may happen that some + * frames will not be caught - to be more specific; there is a race + * condition in hardware such that, when duplicate packets are received + * on member ports very close in time to each other, the hardware fails + * to detect that they are duplicates. + * + * Hence, the SW needs to handle those special cases. However, the speed + * up gain is considerable when above features are used. + * + * Moreover, the NETIF_F_HW_HSR_FWD feature is also enabled, as HSR frames + * can be forwarded in the switch fabric between HSR ports. + */ +#define KSZ9477_SUPPORTED_HSR_FEATURES (NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_FWD) + +void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr) +{ + struct ksz_device *dev = ds->priv; + struct net_device *slave; + struct dsa_port *hsr_dp; + u8 data, hsr_ports = 0; + + /* Program which port(s) shall support HSR */ + ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), BIT(port)); + + /* Forward frames between HSR ports (i.e. bridge together HSR ports) */ + if (dev->hsr_ports) { + dsa_hsr_foreach_port(hsr_dp, ds, hsr) + hsr_ports |= BIT(hsr_dp->index); + + hsr_ports |= BIT(dsa_upstream_port(ds, port)); + dsa_hsr_foreach_port(hsr_dp, ds, hsr) + ksz9477_cfg_port_member(dev, hsr_dp->index, hsr_ports); + } + + if (!dev->hsr_ports) { + /* Enable discarding of received HSR frames */ + ksz_read8(dev, REG_HSR_ALU_CTRL_0__1, &data); + data |= HSR_DUPLICATE_DISCARD; + data &= ~HSR_NODE_UNICAST; + ksz_write8(dev, REG_HSR_ALU_CTRL_0__1, data); + } + + /* Enable per port self-address filtering. + * The global self-address filtering has already been enabled in the + * ksz9477_reset_switch() function. + */ + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_SRC_ADDR_FILTER, true); + + /* Setup HW supported features for lan HSR ports */ + slave = dsa_to_port(ds, port)->slave; + slave->features |= KSZ9477_SUPPORTED_HSR_FEATURES; +} + +void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr) +{ + struct ksz_device *dev = ds->priv; + + /* Clear port HSR support */ + ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), 0); + + /* Disable forwarding frames between HSR ports */ + ksz9477_cfg_port_member(dev, port, BIT(dsa_upstream_port(ds, port))); + + /* Disable per port self-address filtering */ + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_SRC_ADDR_FILTER, false); +} + int ksz9477_switch_init(struct ksz_device *dev) { u8 data8; |