diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c')
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 492 |
1 files changed, 444 insertions, 48 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index 9fe9445cd73b..ed7b2899affe 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -56,6 +56,283 @@ static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) IXGBE_WRITE_FLUSH(hw); } +/** + * ixgbe_read_cs4227 - Read CS4227 register + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: pointer to receive value read + * + * Returns status code + */ +static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) +{ + return hw->phy.ops.read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, + value); +} + +/** + * ixgbe_write_cs4227 - Write CS4227 register + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: value to write to register + * + * Returns status code + */ +static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value) +{ + return hw->phy.ops.write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, + value); +} + +/** + * ixgbe_check_cs4227_reg - Perform diag on a CS4227 register + * @hw: pointer to hardware structure + * @reg: the register to check + * + * Performs a diagnostic on a register in the CS4227 chip. Returns an error + * if it is not operating correctly. + * This function assumes that the caller has acquired the proper semaphore. + */ +static s32 ixgbe_check_cs4227_reg(struct ixgbe_hw *hw, u16 reg) +{ + s32 status; + u32 retry; + u16 reg_val; + + reg_val = (IXGBE_CS4227_EDC_MODE_DIAG << 1) | 1; + status = ixgbe_write_cs4227(hw, reg, reg_val); + if (status) + return status; + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + msleep(IXGBE_CS4227_CHECK_DELAY); + reg_val = 0xFFFF; + ixgbe_read_cs4227(hw, reg, ®_val); + if (!reg_val) + break; + } + if (reg_val) { + hw_err(hw, "CS4227 reg 0x%04X failed diagnostic\n", reg); + return status; + } + + return 0; +} + +/** + * ixgbe_get_cs4227_status - Return CS4227 status + * @hw: pointer to hardware structure + * + * Performs a diagnostic on the CS4227 chip. Returns an error if it is + * not operating correctly. + * This function assumes that the caller has acquired the proper semaphore. + */ +static s32 ixgbe_get_cs4227_status(struct ixgbe_hw *hw) +{ + s32 status; + u16 value = 0; + + /* Exit if the diagnostic has already been performed. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + if (status) + return status; + if (value == IXGBE_CS4227_RESET_COMPLETE) + return 0; + + /* Check port 0. */ + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB); + if (status) + return status; + + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB); + if (status) + return status; + + /* Check port 1. */ + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB + + (1 << 12)); + if (status) + return status; + + return ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB + + (1 << 12)); +} + +/** + * ixgbe_read_pe - Read register from port expander + * @hw: pointer to hardware structure + * @reg: register number to read + * @value: pointer to receive read value + * + * Returns status code + */ +static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value) +{ + s32 status; + + status = ixgbe_read_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, value); + if (status) + hw_err(hw, "port expander access failed with %d\n", status); + return status; +} + +/** + * ixgbe_write_pe - Write register to port expander + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: value to write + * + * Returns status code + */ +static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value) +{ + s32 status; + + status = ixgbe_write_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, + value); + if (status) + hw_err(hw, "port expander access failed with %d\n", status); + return status; +} + +/** + * ixgbe_reset_cs4227 - Reset CS4227 using port expander + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) +{ + s32 status; + u32 retry; + u16 value; + u8 reg; + + /* Trigger hard reset. */ + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg |= IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®); + if (status) + return status; + reg &= ~IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg); + if (status) + return status; + + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg &= ~IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + usleep_range(IXGBE_CS4227_RESET_HOLD, IXGBE_CS4227_RESET_HOLD + 100); + + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg |= IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + /* Wait for the reset to complete. */ + msleep(IXGBE_CS4227_RESET_DELAY); + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS, + &value); + if (!status && value == IXGBE_CS4227_EEPROM_LOAD_OK) + break; + msleep(IXGBE_CS4227_CHECK_DELAY); + } + if (retry == IXGBE_CS4227_RETRIES) { + hw_err(hw, "CS4227 reset did not complete\n"); + return IXGBE_ERR_PHY; + } + + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value); + if (status || !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) { + hw_err(hw, "CS4227 EEPROM did not load successfully\n"); + return IXGBE_ERR_PHY; + } + + return 0; +} + +/** + * ixgbe_check_cs4227 - Check CS4227 and reset as needed + * @hw: pointer to hardware structure + */ +static void ixgbe_check_cs4227(struct ixgbe_hw *hw) +{ + u32 swfw_mask = hw->phy.phy_semaphore_mask; + s32 status; + u16 value; + u8 retry; + + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d\n", status); + msleep(IXGBE_CS4227_CHECK_DELAY); + continue; + } + + /* Get status of reset flow. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + if (!status && value == IXGBE_CS4227_RESET_COMPLETE) + goto out; + + if (status || value != IXGBE_CS4227_RESET_PENDING) + break; + + /* Reset is pending. Wait and check again. */ + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(IXGBE_CS4227_CHECK_DELAY); + } + + /* Reset the CS4227. */ + status = ixgbe_reset_cs4227(hw); + if (status) { + hw_err(hw, "CS4227 reset failed: %d", status); + goto out; + } + + /* Reset takes so long, temporarily release semaphore in case the + * other driver instance is waiting for the reset indication. + */ + ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_PENDING); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + usleep_range(10000, 12000); + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d", status); + return; + } + + /* Is the CS4227 working correctly? */ + status = ixgbe_get_cs4227_status(hw); + if (status) { + hw_err(hw, "CS4227 status failed: %d", status); + goto out; + } + + /* Record completion for next time. */ + status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_COMPLETE); + +out: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(hw->eeprom.semaphore_delay); +} + /** ixgbe_identify_phy_x550em - Get PHY type based on device id * @hw: pointer to hardware structure * @@ -68,7 +345,7 @@ static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) /* set up for CS4227 usage */ hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; ixgbe_setup_mux_ctl(hw); - + ixgbe_check_cs4227(hw); return ixgbe_identify_module_generic(hw); case IXGBE_DEV_ID_X550EM_X_KX4: hw->phy.type = ixgbe_phy_x550em_kx4; @@ -910,6 +1187,96 @@ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) } /** + * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported + * @hw: pointer to hardware structure + * @linear: true if SFP module is linear + */ +static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear) +{ + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_not_present: + return IXGBE_ERR_SFP_NOT_PRESENT; + case ixgbe_sfp_type_da_cu_core0: + case ixgbe_sfp_type_da_cu_core1: + *linear = true; + break; + case ixgbe_sfp_type_srlr_core0: + case ixgbe_sfp_type_srlr_core1: + case ixgbe_sfp_type_da_act_lmt_core0: + case ixgbe_sfp_type_da_act_lmt_core1: + case ixgbe_sfp_type_1g_sx_core0: + case ixgbe_sfp_type_1g_sx_core1: + case ixgbe_sfp_type_1g_lx_core0: + case ixgbe_sfp_type_1g_lx_core1: + *linear = false; + break; + case ixgbe_sfp_type_unknown: + case ixgbe_sfp_type_1g_cu_core0: + case ixgbe_sfp_type_1g_cu_core1: + default: + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + return 0; +} + +/** + * ixgbe_setup_mac_link_sfp_x550em - Configure the KR PHY for SFP. + * @hw: pointer to hardware structure + * + * Configures the extern PHY and the integrated KR PHY for SFP support. + */ +static s32 +ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + __always_unused bool autoneg_wait_to_complete) +{ + s32 status; + u16 slice, value; + bool setup_linear = false; + + /* Check if SFP module is supported and linear */ + status = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * there is no reason to configure CS4227 and SFP not present error is + * not accepted in the setup MAC link flow. + */ + if (status == IXGBE_ERR_SFP_NOT_PRESENT) + return 0; + + if (status) + return status; + + /* Configure CS4227 LINE side to 10G SR. */ + slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12); + value = IXGBE_CS4227_SPEED_10G; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, + value); + + /* Configure CS4227 for HOST connection rate then type. */ + slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12); + value = speed & IXGBE_LINK_SPEED_10GB_FULL ? + IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, + value); + + slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12); + if (setup_linear) + value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; + else + value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, + value); + + /* If internal link mode is XFI, then setup XFI internal link. */ + if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) + status = ixgbe_setup_ixfi_x550em(hw, &speed); + + return status; +} + +/** * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed * @hw: pointer to hardware structure * @speed: new link speed @@ -1003,6 +1370,10 @@ static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) mac->ops.disable_tx_laser = NULL; mac->ops.enable_tx_laser = NULL; mac->ops.flap_tx_laser = NULL; + mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em; + mac->ops.set_rate_select_speed = + ixgbe_set_soft_rate_select_speed; break; case ixgbe_media_type_copper: mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; @@ -1018,53 +1389,18 @@ static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) */ static s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) { - bool setup_linear; - u16 reg_slice, edc_mode; - s32 ret_val; + s32 status; + bool linear; - switch (hw->phy.sfp_type) { - case ixgbe_sfp_type_unknown: - return 0; - case ixgbe_sfp_type_not_present: - return IXGBE_ERR_SFP_NOT_PRESENT; - case ixgbe_sfp_type_da_cu_core0: - case ixgbe_sfp_type_da_cu_core1: - setup_linear = true; - break; - case ixgbe_sfp_type_srlr_core0: - case ixgbe_sfp_type_srlr_core1: - case ixgbe_sfp_type_da_act_lmt_core0: - case ixgbe_sfp_type_da_act_lmt_core1: - case ixgbe_sfp_type_1g_sx_core0: - case ixgbe_sfp_type_1g_sx_core1: - setup_linear = false; - break; - default: - return IXGBE_ERR_SFP_NOT_SUPPORTED; - } + /* Check if SFP module is supported */ + status = ixgbe_supported_sfp_modules_X550em(hw, &linear); + if (status) + return status; ixgbe_init_mac_link_ops_X550em(hw); hw->phy.ops.reset = NULL; - /* The CS4227 slice address is the base address + the port-pair reg - * offset. I.e. Slice 0 = 0x12B0 and slice 1 = 0x22B0. - */ - reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->bus.lan_id << 12); - - if (setup_linear) - edc_mode = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; - else - edc_mode = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; - - /* Configure CS4227 for connection type. */ - ret_val = hw->phy.ops.write_i2c_combined(hw, IXGBE_CS4227, reg_slice, - edc_mode); - - if (ret_val) - ret_val = hw->phy.ops.write_i2c_combined(hw, 0x80, reg_slice, - edc_mode); - - return ret_val; + return 0; } /** ixgbe_get_link_capabilities_x550em - Determines link capabilities @@ -1927,6 +2263,62 @@ static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32)); } +/** + * ixgbe_set_mux - Set mux for port 1 access with CS4227 + * @hw: pointer to hardware structure + * @state: set mux if 1, clear if 0 + */ +static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state) +{ + u32 esdp; + + if (!hw->bus.lan_id) + return; + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (state) + esdp |= IXGBE_ESDP_SDP1; + else + esdp &= ~IXGBE_ESDP_SDP1; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore and sets the I2C MUX + */ +static s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) +{ + s32 status; + + status = ixgbe_acquire_swfw_sync_X540(hw, mask); + if (status) + return status; + + if (mask & IXGBE_GSSR_I2C_MASK) + ixgbe_set_mux(hw, 1); + + return 0; +} + +/** + * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore and sets the I2C MUX + */ +static void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) +{ + if (mask & IXGBE_GSSR_I2C_MASK) + ixgbe_set_mux(hw, 0); + + ixgbe_release_swfw_sync_X540(hw, mask); +} + #define X550_COMMON_MAC \ .init_hw = &ixgbe_init_hw_generic, \ .start_hw = &ixgbe_start_hw_X540, \ @@ -1964,8 +2356,6 @@ static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, &ixgbe_set_source_address_pruning_X550, \ .set_ethertype_anti_spoofing = \ &ixgbe_set_ethertype_anti_spoofing_X550, \ - .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, \ - .release_swfw_sync = &ixgbe_release_swfw_sync_X540, \ .disable_rx_buff = &ixgbe_disable_rx_buff_generic, \ .enable_rx_buff = &ixgbe_enable_rx_buff_generic, \ .get_thermal_sensor_data = NULL, \ @@ -1985,6 +2375,8 @@ static struct ixgbe_mac_operations mac_ops_X550 = { .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, .get_bus_info = &ixgbe_get_bus_info_generic, .setup_sfp = NULL, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, + .release_swfw_sync = &ixgbe_release_swfw_sync_X540, }; static struct ixgbe_mac_operations mac_ops_X550EM_x = { @@ -1997,7 +2389,8 @@ static struct ixgbe_mac_operations mac_ops_X550EM_x = { .get_link_capabilities = &ixgbe_get_link_capabilities_X550em, .get_bus_info = &ixgbe_get_bus_info_X550em, .setup_sfp = ixgbe_setup_sfp_modules_X550em, - + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em, + .release_swfw_sync = &ixgbe_release_swfw_sync_X550em, }; #define X550_COMMON_EEP \ @@ -2039,14 +2432,17 @@ static struct ixgbe_phy_operations phy_ops_X550 = { X550_COMMON_PHY .init = NULL, .identify = &ixgbe_identify_phy_generic, - .read_i2c_combined = &ixgbe_read_i2c_combined_generic, - .write_i2c_combined = &ixgbe_write_i2c_combined_generic, }; static struct ixgbe_phy_operations phy_ops_X550EM_x = { X550_COMMON_PHY .init = &ixgbe_init_phy_ops_X550em, .identify = &ixgbe_identify_phy_x550em, + .read_i2c_combined = &ixgbe_read_i2c_combined_generic, + .write_i2c_combined = &ixgbe_write_i2c_combined_generic, + .read_i2c_combined_unlocked = &ixgbe_read_i2c_combined_generic_unlocked, + .write_i2c_combined_unlocked = + &ixgbe_write_i2c_combined_generic_unlocked, }; static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = { |