diff options
Diffstat (limited to 'drivers/net/hamradio/Kconfig')
| -rw-r--r-- | drivers/net/hamradio/Kconfig | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index 8e05b5c31a77..70f754abbeca 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -3,7 +3,7 @@ config MKISS tristate "Serial port KISS driver" depends on AX25 && TTY select CRC16 - ---help--- + help KISS is a protocol used for the exchange of data between a computer and a Terminal Node Controller (a small embedded system commonly used for networking over AX.25 amateur radio connections; it @@ -20,7 +20,7 @@ config MKISS config 6PACK tristate "Serial port 6PACK driver" depends on AX25 && TTY - ---help--- + help 6pack is a transmission protocol for the data exchange between your PC and your TNC (the Terminal Node Controller acts as a kind of modem connecting your computer's serial port to your radio's @@ -30,7 +30,7 @@ config 6PACK Note that this driver is still experimental and might cause problems. For details about the features and the usage of the - driver, read <file:Documentation/networking/6pack.txt>. + driver, read <file:Documentation/networking/6pack.rst>. To compile this driver as a module, choose M here: the module will be called 6pack. @@ -48,7 +48,7 @@ config BPQETHER config DMASCC tristate "High-speed (DMA) SCC driver for AX.25" depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API - ---help--- + help This is a driver for high-speed SCC boards, i.e. those supporting DMA on one port. You usually use those boards to connect your computer to an amateur radio modem (such as the WA4DSY 56kbps @@ -81,10 +81,10 @@ config DMASCC config SCC tristate "Z8530 SCC driver" depends on ISA && AX25 && ISA_DMA_API - ---help--- + help These cards are used to connect your Linux box to an amateur radio in order to communicate with other computers. If you want to use - this, read <file:Documentation/networking/z8530drv.txt> and the + this, read <file:Documentation/networking/z8530drv.rst> and the AX25-HOWTO, available from <http://www.tldp.org/docs.html#howto>. Also make sure to say Y to "Amateur Radio AX.25 Level 2" support. @@ -98,7 +98,7 @@ config SCC_DELAY help Say Y here if you experience problems with the SCC driver not working properly; please read - <file:Documentation/networking/z8530drv.txt> for details. + <file:Documentation/networking/z8530drv.rst> for details. If unsure, say N. @@ -116,7 +116,7 @@ config BAYCOM_SER_FDX tristate "BAYCOM ser12 fullduplex driver for AX.25" depends on AX25 && !S390 select CRC_CCITT - ---help--- + help This is one of two drivers for Baycom style simple amateur radio modems that connect to a serial interface. The driver supports the ser12 design in full-duplex mode. In addition, it allows the @@ -127,7 +127,7 @@ config BAYCOM_SER_FDX your serial interface chip. To configure the driver, use the sethdlc utility available in the standard ax25 utilities package. For information on the modems, see <http://www.baycom.de/> and - <file:Documentation/networking/baycom.txt>. + <file:Documentation/networking/baycom.rst>. To compile this driver as a module, choose M here: the module will be called baycom_ser_fdx. This is recommended. @@ -136,7 +136,7 @@ config BAYCOM_SER_HDX tristate "BAYCOM ser12 halfduplex driver for AX.25" depends on AX25 && !S390 select CRC_CCITT - ---help--- + help This is one of two drivers for Baycom style simple amateur radio modems that connect to a serial interface. The driver supports the ser12 design in half-duplex mode. This is the old driver. It is @@ -145,7 +145,7 @@ config BAYCOM_SER_HDX the driver, use the sethdlc utility available in the standard ax25 utilities package. For information on the modems, see <http://www.baycom.de/> and - <file:Documentation/networking/baycom.txt>. + <file:Documentation/networking/baycom.rst>. To compile this driver as a module, choose M here: the module will be called baycom_ser_hdx. This is recommended. @@ -154,13 +154,13 @@ config BAYCOM_PAR tristate "BAYCOM picpar and par96 driver for AX.25" depends on PARPORT && AX25 select CRC_CCITT - ---help--- + help This is a driver for Baycom style simple amateur radio modems that connect to a parallel interface. The driver supports the picpar and par96 designs. To configure the driver, use the sethdlc utility available in the standard ax25 utilities package. For information on the modems, see <http://www.baycom.de/> and the file - <file:Documentation/networking/baycom.txt>. + <file:Documentation/networking/baycom.rst>. To compile this driver as a module, choose M here: the module will be called baycom_par. This is recommended. @@ -169,13 +169,13 @@ config BAYCOM_EPP tristate "BAYCOM epp driver for AX.25" depends on PARPORT && AX25 && !64BIT select CRC_CCITT - ---help--- + help This is a driver for Baycom style simple amateur radio modems that connect to a parallel interface. The driver supports the EPP designs. To configure the driver, use the sethdlc utility available in the standard ax25 utilities package. For information on the modems, see <http://www.baycom.de/> and the file - <file:Documentation/networking/baycom.txt>. + <file:Documentation/networking/baycom.rst>. To compile this driver as a module, choose M here: the module will be called baycom_epp. This is recommended. |