1 files changed, 91 insertions, 32 deletions

diff --git a/drivers/net/pcs/pcs-lynx.c b/drivers/net/pcs/pcs-lynx.c
index 622c3de3f3a8..9021b96d4f9d 100644
--- a/drivers/net/pcs/pcs-lynx.c
+++ b/drivers/net/pcs/pcs-lynx.c
@@ -6,6 +6,7 @@
 #include <linux/mdio.h>
 #include <linux/phylink.h>
 #include <linux/pcs-lynx.h>
+#include <linux/property.h>
 
 #define SGMII_CLOCK_PERIOD_NS		8 /* PCS is clocked at 125 MHz */
 #define LINK_TIMER_VAL(ns)		((u32)((ns) / SGMII_CLOCK_PERIOD_NS))
@@ -34,14 +35,6 @@ enum sgmii_speed {
 #define phylink_pcs_to_lynx(pl_pcs) container_of((pl_pcs), struct lynx_pcs, pcs)
 #define lynx_to_phylink_pcs(lynx) (&(lynx)->pcs)
 
-struct mdio_device *lynx_get_mdio_device(struct phylink_pcs *pcs)
-{
-	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
-
-	return lynx->mdio;
-}
-EXPORT_SYMBOL(lynx_get_mdio_device);
-
 static void lynx_pcs_get_state_usxgmii(struct mdio_device *pcs,
 				       struct phylink_link_state *state)
 {
@@ -119,9 +112,10 @@ static void lynx_pcs_get_state(struct phylink_pcs *pcs,
 		state->link, state->an_complete);
 }
 
-static int lynx_pcs_config_giga(struct mdio_device *pcs, unsigned int mode,
+static int lynx_pcs_config_giga(struct mdio_device *pcs,
 				phy_interface_t interface,
-				const unsigned long *advertising)
+				const unsigned long *advertising,
+				unsigned int neg_mode)
 {
 	int link_timer_ns;
 	u32 link_timer;
@@ -139,8 +133,9 @@ static int lynx_pcs_config_giga(struct mdio_device *pcs, unsigned int mode,
 	if (interface == PHY_INTERFACE_MODE_1000BASEX) {
 		if_mode = 0;
 	} else {
+		/* SGMII and QSGMII */
 		if_mode = IF_MODE_SGMII_EN;
-		if (mode == MLO_AN_INBAND)
+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
 			if_mode |= IF_MODE_USE_SGMII_AN;
 	}
 
@@ -150,16 +145,18 @@ static int lynx_pcs_config_giga(struct mdio_device *pcs, unsigned int mode,
 	if (err)
 		return err;
 
-	return phylink_mii_c22_pcs_config(pcs, mode, interface, advertising);
+	return phylink_mii_c22_pcs_config(pcs, interface, advertising,
+					  neg_mode);
 }
 
-static int lynx_pcs_config_usxgmii(struct mdio_device *pcs, unsigned int mode,
-				   const unsigned long *advertising)
+static int lynx_pcs_config_usxgmii(struct mdio_device *pcs,
+				   const unsigned long *advertising,
+				   unsigned int neg_mode)
 {
 	struct mii_bus *bus = pcs->bus;
 	int addr = pcs->addr;
 
-	if (!phylink_autoneg_inband(mode)) {
+	if (neg_mode != PHYLINK_PCS_NEG_INBAND_ENABLED) {
 		dev_err(&pcs->dev, "USXGMII only supports in-band AN for now\n");
 		return -EOPNOTSUPP;
 	}
@@ -171,10 +168,9 @@ static int lynx_pcs_config_usxgmii(struct mdio_device *pcs, unsigned int mode,
 				 ADVERTISE_SGMII | ADVERTISE_LPACK);
 }
 
-static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
 			   phy_interface_t ifmode,
-			   const unsigned long *advertising,
-			   bool permit)
+			   const unsigned long *advertising, bool permit)
 {
 	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
 
@@ -182,17 +178,18 @@ static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
-		return lynx_pcs_config_giga(lynx->mdio, mode, ifmode,
-					    advertising);
+		return lynx_pcs_config_giga(lynx->mdio, ifmode, advertising,
+					    neg_mode);
 	case PHY_INTERFACE_MODE_2500BASEX:
-		if (phylink_autoneg_inband(mode)) {
+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
 			dev_err(&lynx->mdio->dev,
 				"AN not supported on 3.125GHz SerDes lane\n");
 			return -EOPNOTSUPP;
 		}
 		break;
 	case PHY_INTERFACE_MODE_USXGMII:
-		return lynx_pcs_config_usxgmii(lynx->mdio, mode, advertising);
+		return lynx_pcs_config_usxgmii(lynx->mdio, advertising,
+					       neg_mode);
 	case PHY_INTERFACE_MODE_10GBASER:
 		/* Nothing to do here for 10GBASER */
 		break;
@@ -210,7 +207,8 @@ static void lynx_pcs_an_restart(struct phylink_pcs *pcs)
 	phylink_mii_c22_pcs_an_restart(lynx->mdio);
 }
 
-static void lynx_pcs_link_up_sgmii(struct mdio_device *pcs, unsigned int mode,
+static void lynx_pcs_link_up_sgmii(struct mdio_device *pcs,
+				   unsigned int neg_mode,
 				   int speed, int duplex)
 {
 	u16 if_mode = 0, sgmii_speed;
@@ -218,7 +216,7 @@ static void lynx_pcs_link_up_sgmii(struct mdio_device *pcs, unsigned int mode,
 	/* The PCS needs to be configured manually only
 	 * when not operating on in-band mode
 	 */
-	if (mode == MLO_AN_INBAND)
+	if (neg_mode != PHYLINK_PCS_NEG_INBAND_ENABLED)
 		return;
 
 	if (duplex == DUPLEX_HALF)
@@ -265,12 +263,12 @@ static void lynx_pcs_link_up_sgmii(struct mdio_device *pcs, unsigned int mode,
  * 2500 Mbps and we do rate adaptation through pause frames.
  */
 static void lynx_pcs_link_up_2500basex(struct mdio_device *pcs,
-				       unsigned int mode,
+				       unsigned int neg_mode,
 				       int speed, int duplex)
 {
 	u16 if_mode = 0;
 
-	if (mode == MLO_AN_INBAND) {
+	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
 		dev_err(&pcs->dev, "AN not supported for 2500BaseX\n");
 		return;
 	}
@@ -284,7 +282,7 @@ static void lynx_pcs_link_up_2500basex(struct mdio_device *pcs,
 		       if_mode);
 }
 
-static void lynx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+static void lynx_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
 			     phy_interface_t interface,
 			     int speed, int duplex)
 {
@@ -293,10 +291,10 @@ static void lynx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
 	switch (interface) {
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
-		lynx_pcs_link_up_sgmii(lynx->mdio, mode, speed, duplex);
+		lynx_pcs_link_up_sgmii(lynx->mdio, neg_mode, speed, duplex);
 		break;
 	case PHY_INTERFACE_MODE_2500BASEX:
-		lynx_pcs_link_up_2500basex(lynx->mdio, mode, speed, duplex);
+		lynx_pcs_link_up_2500basex(lynx->mdio, neg_mode, speed, duplex);
 		break;
 	case PHY_INTERFACE_MODE_USXGMII:
 		/* At the moment, only in-band AN is supported for USXGMII
@@ -315,26 +313,87 @@ static const struct phylink_pcs_ops lynx_pcs_phylink_ops = {
 	.pcs_link_up = lynx_pcs_link_up,
 };
 
-struct phylink_pcs *lynx_pcs_create(struct mdio_device *mdio)
+static struct phylink_pcs *lynx_pcs_create(struct mdio_device *mdio)
 {
 	struct lynx_pcs *lynx;
 
 	lynx = kzalloc(sizeof(*lynx), GFP_KERNEL);
 	if (!lynx)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
+	mdio_device_get(mdio);
 	lynx->mdio = mdio;
 	lynx->pcs.ops = &lynx_pcs_phylink_ops;
+	lynx->pcs.neg_mode = true;
 	lynx->pcs.poll = true;
 
 	return lynx_to_phylink_pcs(lynx);
 }
-EXPORT_SYMBOL(lynx_pcs_create);
+
+struct phylink_pcs *lynx_pcs_create_mdiodev(struct mii_bus *bus, int addr)
+{
+	struct mdio_device *mdio;
+	struct phylink_pcs *pcs;
+
+	mdio = mdio_device_create(bus, addr);
+	if (IS_ERR(mdio))
+		return ERR_CAST(mdio);
+
+	pcs = lynx_pcs_create(mdio);
+
+	/* lynx_create() has taken a refcount on the mdiodev if it was
+	 * successful. If lynx_create() fails, this will free the mdio
+	 * device here. In any case, we don't need to hold our reference
+	 * anymore, and putting it here will allow mdio_device_put() in
+	 * lynx_destroy() to automatically free the mdio device.
+	 */
+	mdio_device_put(mdio);
+
+	return pcs;
+}
+EXPORT_SYMBOL(lynx_pcs_create_mdiodev);
+
+/*
+ * lynx_pcs_create_fwnode() creates a lynx PCS instance from the fwnode
+ * device indicated by node.
+ *
+ * Returns:
+ *  -ENODEV if the fwnode is marked unavailable
+ *  -EPROBE_DEFER if we fail to find the device
+ *  -ENOMEM if we fail to allocate memory
+ *  pointer to a phylink_pcs on success
+ */
+struct phylink_pcs *lynx_pcs_create_fwnode(struct fwnode_handle *node)
+{
+	struct mdio_device *mdio;
+	struct phylink_pcs *pcs;
+
+	if (!fwnode_device_is_available(node))
+		return ERR_PTR(-ENODEV);
+
+	mdio = fwnode_mdio_find_device(node);
+	if (!mdio)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	pcs = lynx_pcs_create(mdio);
+
+	/* lynx_create() has taken a refcount on the mdiodev if it was
+	 * successful. If lynx_create() fails, this will free the mdio
+	 * device here. In any case, we don't need to hold our reference
+	 * anymore, and putting it here will allow mdio_device_put() in
+	 * lynx_destroy() to automatically free the mdio device.
+	 */
+	mdio_device_put(mdio);
+
+	return pcs;
+}
+EXPORT_SYMBOL_GPL(lynx_pcs_create_fwnode);
 
 void lynx_pcs_destroy(struct phylink_pcs *pcs)
 {
 	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
 
+	mdio_device_put(lynx->mdio);
 	kfree(lynx);
 }
 EXPORT_SYMBOL(lynx_pcs_destroy);