summaryrefslogtreecommitdiff
path: root/drivers/net/phy/at803x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/at803x.c')
-rw-r--r--drivers/net/phy/at803x.c125
1 files changed, 89 insertions, 36 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 2d020a3ec0b5..2174ec937b4d 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -20,10 +20,21 @@
#include <linux/gpio/consumer.h>
#define AT803X_INTR_ENABLE 0x12
+#define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15)
+#define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14)
+#define AT803X_INTR_ENABLE_DUPLEX_CHANGED BIT(13)
+#define AT803X_INTR_ENABLE_PAGE_RECEIVED BIT(12)
+#define AT803X_INTR_ENABLE_LINK_FAIL BIT(11)
+#define AT803X_INTR_ENABLE_LINK_SUCCESS BIT(10)
+#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE BIT(5)
+#define AT803X_INTR_ENABLE_POLARITY_CHANGED BIT(1)
+#define AT803X_INTR_ENABLE_WOL BIT(0)
+
#define AT803X_INTR_STATUS 0x13
+
#define AT803X_SMART_SPEED 0x14
#define AT803X_LED_CONTROL 0x18
-#define AT803X_WOL_ENABLE 0x01
+
#define AT803X_DEVICE_ADDR 0x03
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
@@ -31,13 +42,15 @@
#define AT803X_MMD_ACCESS_CONTROL 0x0D
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
#define AT803X_FUNC_DATA 0x4003
-#define AT803X_INER 0x0012
-#define AT803X_INER_INIT 0xec00
-#define AT803X_INSR 0x0013
+
#define AT803X_DEBUG_ADDR 0x1D
#define AT803X_DEBUG_DATA 0x1E
-#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
-#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
+
+#define AT803X_DEBUG_REG_0 0x00
+#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
+
+#define AT803X_DEBUG_REG_5 0x05
+#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)
#define ATH8030_PHY_ID 0x004dd076
#define ATH8031_PHY_ID 0x004dd074
@@ -61,6 +74,46 @@ struct at803x_context {
u16 led_control;
};
+static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
+{
+ int ret;
+
+ ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
+ if (ret < 0)
+ return ret;
+
+ return phy_read(phydev, AT803X_DEBUG_DATA);
+}
+
+static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
+ u16 clear, u16 set)
+{
+ u16 val;
+ int ret;
+
+ ret = at803x_debug_reg_read(phydev, reg);
+ if (ret < 0)
+ return ret;
+
+ val = ret & 0xffff;
+ val &= ~clear;
+ val |= set;
+
+ return phy_write(phydev, AT803X_DEBUG_DATA, val);
+}
+
+static inline int at803x_enable_rx_delay(struct phy_device *phydev)
+{
+ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
+ AT803X_DEBUG_RX_CLK_DLY_EN);
+}
+
+static inline int at803x_enable_tx_delay(struct phy_device *phydev)
+{
+ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
+ AT803X_DEBUG_TX_CLK_DLY_EN);
+}
+
/* save relevant PHY registers to private copy */
static void at803x_context_save(struct phy_device *phydev,
struct at803x_context *context)
@@ -119,14 +172,14 @@ static int at803x_set_wol(struct phy_device *phydev,
}
value = phy_read(phydev, AT803X_INTR_ENABLE);
- value |= AT803X_WOL_ENABLE;
+ value |= AT803X_INTR_ENABLE_WOL;
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
if (ret)
return ret;
value = phy_read(phydev, AT803X_INTR_STATUS);
} else {
value = phy_read(phydev, AT803X_INTR_ENABLE);
- value &= (~AT803X_WOL_ENABLE);
+ value &= (~AT803X_INTR_ENABLE_WOL);
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
if (ret)
return ret;
@@ -145,7 +198,7 @@ static void at803x_get_wol(struct phy_device *phydev,
wol->wolopts = 0;
value = phy_read(phydev, AT803X_INTR_ENABLE);
- if (value & AT803X_WOL_ENABLE)
+ if (value & AT803X_INTR_ENABLE_WOL)
wol->wolopts |= WAKE_MAGIC;
}
@@ -157,7 +210,7 @@ static int at803x_suspend(struct phy_device *phydev)
mutex_lock(&phydev->lock);
value = phy_read(phydev, AT803X_INTR_ENABLE);
- wol_enabled = value & AT803X_WOL_ENABLE;
+ wol_enabled = value & AT803X_INTR_ENABLE_WOL;
value = phy_read(phydev, MII_BMCR);
@@ -190,7 +243,7 @@ static int at803x_resume(struct phy_device *phydev)
static int at803x_probe(struct phy_device *phydev)
{
- struct device *dev = &phydev->dev;
+ struct device *dev = &phydev->mdio.dev;
struct at803x_priv *priv;
struct gpio_desc *gpiod_reset;
@@ -217,14 +270,17 @@ static int at803x_config_init(struct phy_device *phydev)
if (ret < 0)
return ret;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
- ret = phy_write(phydev, AT803X_DEBUG_ADDR,
- AT803X_DEBUG_SYSTEM_MODE_CTRL);
- if (ret)
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+ ret = at803x_enable_rx_delay(phydev);
+ if (ret < 0)
return ret;
- ret = phy_write(phydev, AT803X_DEBUG_DATA,
- AT803X_DEBUG_RGMII_TX_CLK_DLY);
- if (ret)
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+ ret = at803x_enable_tx_delay(phydev);
+ if (ret < 0)
return ret;
}
@@ -235,7 +291,7 @@ static int at803x_ack_interrupt(struct phy_device *phydev)
{
int err;
- err = phy_read(phydev, AT803X_INSR);
+ err = phy_read(phydev, AT803X_INTR_STATUS);
return (err < 0) ? err : 0;
}
@@ -245,13 +301,19 @@ static int at803x_config_intr(struct phy_device *phydev)
int err;
int value;
- value = phy_read(phydev, AT803X_INER);
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
+ value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
+ value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
+ value |= AT803X_INTR_ENABLE_LINK_FAIL;
+ value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
- if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
- err = phy_write(phydev, AT803X_INER,
- value | AT803X_INER_INIT);
+ err = phy_write(phydev, AT803X_INTR_ENABLE, value);
+ }
else
- err = phy_write(phydev, AT803X_INER, 0);
+ err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
return err;
}
@@ -281,8 +343,8 @@ static void at803x_link_change_notify(struct phy_device *phydev)
at803x_context_restore(phydev, &context);
- dev_dbg(&phydev->dev, "%s(): phy was reset\n",
- __func__);
+ phydev_dbg(phydev, "%s(): phy was reset\n",
+ __func__);
priv->phy_reset = true;
}
} else {
@@ -310,9 +372,6 @@ static struct phy_driver at803x_driver[] = {
.read_status = genphy_read_status,
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
- .driver = {
- .owner = THIS_MODULE,
- },
}, {
/* ATHEROS 8030 */
.phy_id = ATH8030_PHY_ID,
@@ -325,15 +384,12 @@ static struct phy_driver at803x_driver[] = {
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
- .features = PHY_GBIT_FEATURES,
+ .features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
- .driver = {
- .owner = THIS_MODULE,
- },
}, {
/* ATHEROS 8031 */
.phy_id = ATH8031_PHY_ID,
@@ -352,9 +408,6 @@ static struct phy_driver at803x_driver[] = {
.read_status = genphy_read_status,
.ack_interrupt = &at803x_ack_interrupt,
.config_intr = &at803x_config_intr,
- .driver = {
- .owner = THIS_MODULE,
- },
} };
module_phy_driver(at803x_driver);