diff options
Diffstat (limited to 'drivers/net/phy/motorcomm.c')
| -rw-r--r-- | drivers/net/phy/motorcomm.c | 52 |
1 files changed, 47 insertions, 5 deletions
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index bd1ab5d0631f..685190db72de 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Motorcomm 8511/8521 PHY driver. + * Motorcomm 8511/8521/8531S PHY driver. * * Author: Peter Geis <pgwipeout@gmail.com> * Author: Frank <Frank.Sae@motor-comm.com> @@ -12,9 +12,10 @@ #include <linux/phy.h> #define PHY_ID_YT8511 0x0000010a -#define PHY_ID_YT8521 0x0000011A +#define PHY_ID_YT8521 0x0000011A +#define PHY_ID_YT8531S 0x4F51E91A -/* YT8521 Register Overview +/* YT8521/YT8531S Register Overview * UTP Register space | FIBER Register space * ------------------------------------------------------------ * | UTP MII | FIBER MII | @@ -147,7 +148,7 @@ #define YT8521_LINK_TIMER_CFG2_REG 0xA5 #define YT8521_LTCR_EN_AUTOSEN BIT(15) -/* 0xA000, 0xA001, 0xA003 ,and 0xA006 ~ 0xA00A are common ext registers +/* 0xA000, 0xA001, 0xA003, 0xA006 ~ 0xA00A and 0xA012 are common ext registers * of yt8521 phy. There is no need to switch reg space when operating these * registers. */ @@ -221,6 +222,9 @@ */ #define YTPHY_WCR_TYPE_PULSE BIT(0) +#define YT8531S_SYNCE_CFG_REG 0xA012 +#define YT8531S_SCR_SYNCE_ENABLE BIT(6) + /* Extended Register end */ struct yt8521_priv { @@ -648,6 +652,26 @@ static int yt8521_probe(struct phy_device *phydev) } /** + * yt8531s_probe() - read chip config then set suitable polling_mode + * @phydev: a pointer to a &struct phy_device + * + * returns 0 or negative errno code + */ +static int yt8531s_probe(struct phy_device *phydev) +{ + int ret; + + /* Disable SyncE clock output by default */ + ret = ytphy_modify_ext_with_lock(phydev, YT8531S_SYNCE_CFG_REG, + YT8531S_SCR_SYNCE_ENABLE, 0); + if (ret < 0) + return ret; + + /* same as yt8521_probe */ + return yt8521_probe(phydev); +} + +/** * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp * @phydev: a pointer to a &struct phy_device * @@ -1750,11 +1774,28 @@ static struct phy_driver motorcomm_phy_drvs[] = { .suspend = yt8521_suspend, .resume = yt8521_resume, }, + { + PHY_ID_MATCH_EXACT(PHY_ID_YT8531S), + .name = "YT8531S Gigabit Ethernet", + .get_features = yt8521_get_features, + .probe = yt8531s_probe, + .read_page = yt8521_read_page, + .write_page = yt8521_write_page, + .get_wol = ytphy_get_wol, + .set_wol = ytphy_set_wol, + .config_aneg = yt8521_config_aneg, + .aneg_done = yt8521_aneg_done, + .config_init = yt8521_config_init, + .read_status = yt8521_read_status, + .soft_reset = yt8521_soft_reset, + .suspend = yt8521_suspend, + .resume = yt8521_resume, + }, }; module_phy_driver(motorcomm_phy_drvs); -MODULE_DESCRIPTION("Motorcomm 8511/8521 PHY driver"); +MODULE_DESCRIPTION("Motorcomm 8511/8521/8531S PHY driver"); MODULE_AUTHOR("Peter Geis"); MODULE_AUTHOR("Frank"); MODULE_LICENSE("GPL"); @@ -1762,6 +1803,7 @@ MODULE_LICENSE("GPL"); static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = { { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) }, { /* sentinal */ } }; |