summaryrefslogtreecommitdiff
path: root/drivers/net/usb/r8152.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/usb/r8152.c')
-rw-r--r--drivers/net/usb/r8152.c1308
1 files changed, 1172 insertions, 136 deletions
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index cee9fef925cd..c5ebf35d2488 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -24,9 +24,11 @@
#include <linux/suspend.h>
#include <linux/atomic.h>
#include <linux/acpi.h>
+#include <linux/firmware.h>
+#include <crypto/hash.h>
/* Information for net-next */
-#define NETNEXT_VERSION "10"
+#define NETNEXT_VERSION "11"
/* Information for net */
#define NET_VERSION "10"
@@ -54,8 +56,11 @@
#define PLA_BDC_CR 0xd1a0
#define PLA_TEREDO_TIMER 0xd2cc
#define PLA_REALWOW_TIMER 0xd2e8
+#define PLA_UPHY_TIMER 0xd388
#define PLA_SUSPEND_FLAG 0xd38a
#define PLA_INDICATE_FALG 0xd38c
+#define PLA_MACDBG_PRE 0xd38c /* RTL_VER_04 only */
+#define PLA_MACDBG_POST 0xd38e /* RTL_VER_04 only */
#define PLA_EXTRA_STATUS 0xd398
#define PLA_EFUSE_DATA 0xdd00
#define PLA_EFUSE_CMD 0xdd02
@@ -110,7 +115,12 @@
#define USB_CONNECT_TIMER 0xcbf8
#define USB_MSC_TIMER 0xcbfc
#define USB_BURST_SIZE 0xcfc0
+#define USB_FW_FIX_EN0 0xcfca
+#define USB_FW_FIX_EN1 0xcfcc
#define USB_LPM_CONFIG 0xcfd8
+#define USB_CSTMR 0xcfef /* RTL8153A */
+#define USB_FW_CTRL 0xd334 /* RTL8153B */
+#define USB_FC_TIMER 0xd340
#define USB_USB_CTRL 0xd406
#define USB_PHY_CTRL 0xd408
#define USB_TX_AGG 0xd40a
@@ -126,6 +136,7 @@
#define USB_LPM_CTRL 0xd41a
#define USB_BMU_RESET 0xd4b0
#define USB_U1U2_TIMER 0xd4da
+#define USB_FW_TASK 0xd4e8 /* RTL8153B */
#define USB_UPS_CTRL 0xd800
#define USB_POWER_CUT 0xd80a
#define USB_MISC_0 0xd81a
@@ -133,18 +144,19 @@
#define USB_AFE_CTRL2 0xd824
#define USB_UPS_CFG 0xd842
#define USB_UPS_FLAGS 0xd848
+#define USB_WDT1_CTRL 0xe404
#define USB_WDT11_CTRL 0xe43c
-#define USB_BP_BA 0xfc26
-#define USB_BP_0 0xfc28
-#define USB_BP_1 0xfc2a
-#define USB_BP_2 0xfc2c
-#define USB_BP_3 0xfc2e
-#define USB_BP_4 0xfc30
-#define USB_BP_5 0xfc32
-#define USB_BP_6 0xfc34
-#define USB_BP_7 0xfc36
-#define USB_BP_EN 0xfc38
-#define USB_BP_8 0xfc38
+#define USB_BP_BA PLA_BP_BA
+#define USB_BP_0 PLA_BP_0
+#define USB_BP_1 PLA_BP_1
+#define USB_BP_2 PLA_BP_2
+#define USB_BP_3 PLA_BP_3
+#define USB_BP_4 PLA_BP_4
+#define USB_BP_5 PLA_BP_5
+#define USB_BP_6 PLA_BP_6
+#define USB_BP_7 PLA_BP_7
+#define USB_BP_EN PLA_BP_EN /* RTL8153A */
+#define USB_BP_8 0xfc38 /* RTL8153B */
#define USB_BP_9 0xfc3a
#define USB_BP_10 0xfc3c
#define USB_BP_11 0xfc3e
@@ -175,6 +187,7 @@
#define OCP_PHY_STATE 0xa708 /* nway state for 8153 */
#define OCP_PHY_PATCH_STAT 0xb800
#define OCP_PHY_PATCH_CMD 0xb820
+#define OCP_PHY_LOCK 0xb82e
#define OCP_ADC_IOFFSET 0xbcfc
#define OCP_ADC_CFG 0xbc06
#define OCP_SYSCLK_CFG 0xc416
@@ -185,6 +198,7 @@
#define SRAM_10M_AMP1 0x8080
#define SRAM_10M_AMP2 0x8082
#define SRAM_IMPEDANCE 0x8084
+#define SRAM_PHY_LOCK 0xb82e
/* PLA_RCR */
#define RCR_AAP 0x00000001
@@ -346,7 +360,12 @@
/* PLA_INDICATE_FALG */
#define UPCOMING_RUNTIME_D3 BIT(0)
+/* PLA_MACDBG_PRE and PLA_MACDBG_POST */
+#define DEBUG_OE BIT(0)
+#define DEBUG_LTSSM 0x0082
+
/* PLA_EXTRA_STATUS */
+#define U3P3_CHECK_EN BIT(7) /* RTL_VER_05 only */
#define LINK_CHANGE_FLAG BIT(8)
/* USB_USB2PHY */
@@ -368,6 +387,12 @@
#define STAT_SPEED_HIGH 0x0000
#define STAT_SPEED_FULL 0x0002
+/* USB_FW_FIX_EN0 */
+#define FW_FIX_SUSPEND BIT(14)
+
+/* USB_FW_FIX_EN1 */
+#define FW_IP_RESET_EN BIT(9)
+
/* USB_LPM_CONFIG */
#define LPM_U1U2_EN BIT(0)
@@ -392,12 +417,24 @@
#define OWN_UPDATE BIT(0)
#define OWN_CLEAR BIT(1)
+/* USB_FW_TASK */
+#define FC_PATCH_TASK BIT(1)
+
/* USB_UPS_CTRL */
#define POWER_CUT 0x0100
/* USB_PM_CTRL_STATUS */
#define RESUME_INDICATE 0x0001
+/* USB_CSTMR */
+#define FORCE_SUPER BIT(0)
+
+/* USB_FW_CTRL */
+#define FLOW_CTRL_PATCH_OPT BIT(1)
+
+/* USB_FC_TIMER */
+#define CTRL_TIMER_EN BIT(15)
+
/* USB_USB_CTRL */
#define RX_AGG_DISABLE 0x0010
#define RX_ZERO_EN 0x0080
@@ -419,6 +456,9 @@
#define COALESCE_HIGH 250000U
#define COALESCE_SLOW 524280U
+/* USB_WDT1_CTRL */
+#define WTD1_EN BIT(0)
+
/* USB_WDT11_CTRL */
#define TIMER11_EN 0x0001
@@ -539,6 +579,9 @@ enum spd_duplex {
/* OCP_PHY_PATCH_CMD */
#define PATCH_REQUEST BIT(4)
+/* OCP_PHY_LOCK */
+#define PATCH_LOCK BIT(0)
+
/* OCP_ADC_CFG */
#define CKADSEL_L 0x0100
#define ADC_EN 0x0080
@@ -563,6 +606,9 @@ enum spd_duplex {
/* SRAM_IMPEDANCE */
#define RX_DRIVING_MASK 0x6000
+/* SRAM_PHY_LOCK */
+#define PHY_PATCH_LOCK 0x0001
+
/* MAC PASSTHRU */
#define AD_MASK 0xfee0
#define BND_MASK 0x0004
@@ -570,6 +616,8 @@ enum spd_duplex {
#define EFUSE 0xcfdb
#define PASS_THRU_MASK 0x1
+#define BP4_SUPER_ONLY 0x1578 /* RTL_VER_04 only */
+
enum rtl_register_content {
_1000bps = 0x10,
_100bps = 0x08,
@@ -622,6 +670,7 @@ enum rtl8152_flags {
SCHEDULE_TASKLET,
GREEN_ETHERNET,
DELL_TB_RX_AGG_BUG,
+ LENOVO_MACPASSTHRU,
};
/* Define these values to match your device */
@@ -736,16 +785,16 @@ struct r8152 {
struct tasklet_struct tx_tl;
struct rtl_ops {
- void (*init)(struct r8152 *);
- int (*enable)(struct r8152 *);
- void (*disable)(struct r8152 *);
- void (*up)(struct r8152 *);
- void (*down)(struct r8152 *);
- void (*unload)(struct r8152 *);
- int (*eee_get)(struct r8152 *, struct ethtool_eee *);
- int (*eee_set)(struct r8152 *, struct ethtool_eee *);
- bool (*in_nway)(struct r8152 *);
- void (*hw_phy_cfg)(struct r8152 *);
+ void (*init)(struct r8152 *tp);
+ int (*enable)(struct r8152 *tp);
+ void (*disable)(struct r8152 *tp);
+ void (*up)(struct r8152 *tp);
+ void (*down)(struct r8152 *tp);
+ void (*unload)(struct r8152 *tp);
+ int (*eee_get)(struct r8152 *tp, struct ethtool_eee *eee);
+ int (*eee_set)(struct r8152 *tp, struct ethtool_eee *eee);
+ bool (*in_nway)(struct r8152 *tp);
+ void (*hw_phy_cfg)(struct r8152 *tp);
void (*autosuspend_en)(struct r8152 *tp, bool enable);
} rtl_ops;
@@ -766,6 +815,19 @@ struct r8152 {
u32 ctap_short_off:1;
} ups_info;
+#define RTL_VER_SIZE 32
+
+ struct rtl_fw {
+ const char *fw_name;
+ const struct firmware *fw;
+
+ char version[RTL_VER_SIZE];
+ int (*pre_fw)(struct r8152 *tp);
+ int (*post_fw)(struct r8152 *tp);
+
+ bool retry;
+ } rtl_fw;
+
atomic_t rx_count;
bool eee_en;
@@ -788,6 +850,131 @@ struct r8152 {
u8 autoneg;
};
+/**
+ * struct fw_block - block type and total length
+ * @type: type of the current block, such as RTL_FW_END, RTL_FW_PLA,
+ * RTL_FW_USB and so on.
+ * @length: total length of the current block.
+ */
+struct fw_block {
+ __le32 type;
+ __le32 length;
+} __packed;
+
+/**
+ * struct fw_header - header of the firmware file
+ * @checksum: checksum of sha256 which is calculated from the whole file
+ * except the checksum field of the file. That is, calculate sha256
+ * from the version field to the end of the file.
+ * @version: version of this firmware.
+ * @blocks: the first firmware block of the file
+ */
+struct fw_header {
+ u8 checksum[32];
+ char version[RTL_VER_SIZE];
+ struct fw_block blocks[0];
+} __packed;
+
+/**
+ * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
+ * The layout of the firmware block is:
+ * <struct fw_mac> + <info> + <firmware data>.
+ * @fw_offset: offset of the firmware binary data. The start address of
+ * the data would be the address of struct fw_mac + @fw_offset.
+ * @fw_reg: the register to load the firmware. Depends on chip.
+ * @bp_ba_addr: the register to write break point base address. Depends on
+ * chip.
+ * @bp_ba_value: break point base address. Depends on chip.
+ * @bp_en_addr: the register to write break point enabled mask. Depends
+ * on chip.
+ * @bp_en_value: break point enabled mask. Depends on the firmware.
+ * @bp_start: the start register of break points. Depends on chip.
+ * @bp_num: the break point number which needs to be set for this firmware.
+ * Depends on the firmware.
+ * @bp: break points. Depends on firmware.
+ * @fw_ver_reg: the register to store the fw version.
+ * @fw_ver_data: the firmware version of the current type.
+ * @info: additional information for debugging, and is followed by the
+ * binary data of firmware.
+ */
+struct fw_mac {
+ struct fw_block blk_hdr;
+ __le16 fw_offset;
+ __le16 fw_reg;
+ __le16 bp_ba_addr;
+ __le16 bp_ba_value;
+ __le16 bp_en_addr;
+ __le16 bp_en_value;
+ __le16 bp_start;
+ __le16 bp_num;
+ __le16 bp[16]; /* any value determined by firmware */
+ __le32 reserved;
+ __le16 fw_ver_reg;
+ u8 fw_ver_data;
+ char info[0];
+} __packed;
+
+/**
+ * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START.
+ * This is used to set patch key when loading the firmware of PHY.
+ * @key_reg: the register to write the patch key.
+ * @key_data: patch key.
+ */
+struct fw_phy_patch_key {
+ struct fw_block blk_hdr;
+ __le16 key_reg;
+ __le16 key_data;
+ __le32 reserved;
+} __packed;
+
+/**
+ * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC.
+ * The layout of the firmware block is:
+ * <struct fw_phy_nc> + <info> + <firmware data>.
+ * @fw_offset: offset of the firmware binary data. The start address of
+ * the data would be the address of struct fw_phy_nc + @fw_offset.
+ * @fw_reg: the register to load the firmware. Depends on chip.
+ * @ba_reg: the register to write the base address. Depends on chip.
+ * @ba_data: base address. Depends on chip.
+ * @patch_en_addr: the register of enabling patch mode. Depends on chip.
+ * @patch_en_value: patch mode enabled mask. Depends on the firmware.
+ * @mode_reg: the regitster of switching the mode.
+ * @mod_pre: the mode needing to be set before loading the firmware.
+ * @mod_post: the mode to be set when finishing to load the firmware.
+ * @bp_start: the start register of break points. Depends on chip.
+ * @bp_num: the break point number which needs to be set for this firmware.
+ * Depends on the firmware.
+ * @bp: break points. Depends on firmware.
+ * @info: additional information for debugging, and is followed by the
+ * binary data of firmware.
+ */
+struct fw_phy_nc {
+ struct fw_block blk_hdr;
+ __le16 fw_offset;
+ __le16 fw_reg;
+ __le16 ba_reg;
+ __le16 ba_data;
+ __le16 patch_en_addr;
+ __le16 patch_en_value;
+ __le16 mode_reg;
+ __le16 mode_pre;
+ __le16 mode_post;
+ __le16 reserved;
+ __le16 bp_start;
+ __le16 bp_num;
+ __le16 bp[4];
+ char info[0];
+} __packed;
+
+enum rtl_fw_type {
+ RTL_FW_END = 0,
+ RTL_FW_PLA,
+ RTL_FW_USB,
+ RTL_FW_PHY_START,
+ RTL_FW_PHY_STOP,
+ RTL_FW_PHY_NC,
+};
+
enum rtl_version {
RTL_VER_UNKNOWN = 0,
RTL_VER_01,
@@ -1222,38 +1409,52 @@ static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
int ret = -EINVAL;
u32 ocp_data;
unsigned char buf[6];
-
- /* test for -AD variant of RTL8153 */
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
- if ((ocp_data & AD_MASK) == 0x1000) {
- /* test for MAC address pass-through bit */
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
- if ((ocp_data & PASS_THRU_MASK) != 1) {
- netif_dbg(tp, probe, tp->netdev,
- "No efuse for RTL8153-AD MAC pass through\n");
- return -ENODEV;
- }
+ char *mac_obj_name;
+ acpi_object_type mac_obj_type;
+ int mac_strlen;
+
+ if (test_bit(LENOVO_MACPASSTHRU, &tp->flags)) {
+ mac_obj_name = "\\MACA";
+ mac_obj_type = ACPI_TYPE_STRING;
+ mac_strlen = 0x16;
} else {
- /* test for RTL8153-BND and RTL8153-BD */
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
- if ((ocp_data & BND_MASK) == 0 && (ocp_data & BD_MASK) == 0) {
- netif_dbg(tp, probe, tp->netdev,
- "Invalid variant for MAC pass through\n");
- return -ENODEV;
+ /* test for -AD variant of RTL8153 */
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+ if ((ocp_data & AD_MASK) == 0x1000) {
+ /* test for MAC address pass-through bit */
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+ if ((ocp_data & PASS_THRU_MASK) != 1) {
+ netif_dbg(tp, probe, tp->netdev,
+ "No efuse for RTL8153-AD MAC pass through\n");
+ return -ENODEV;
+ }
+ } else {
+ /* test for RTL8153-BND and RTL8153-BD */
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+ if ((ocp_data & BND_MASK) == 0 && (ocp_data & BD_MASK) == 0) {
+ netif_dbg(tp, probe, tp->netdev,
+ "Invalid variant for MAC pass through\n");
+ return -ENODEV;
+ }
}
+
+ mac_obj_name = "\\_SB.AMAC";
+ mac_obj_type = ACPI_TYPE_BUFFER;
+ mac_strlen = 0x17;
}
/* returns _AUXMAC_#AABBCCDDEEFF# */
- status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer);
+ status = acpi_evaluate_object(NULL, mac_obj_name, NULL, &buffer);
obj = (union acpi_object *)buffer.pointer;
if (!ACPI_SUCCESS(status))
return -ENODEV;
- if (obj->type != ACPI_TYPE_BUFFER || obj->string.length != 0x17) {
+ if (obj->type != mac_obj_type || obj->string.length != mac_strlen) {
netif_warn(tp, probe, tp->netdev,
"Invalid buffer for pass-thru MAC addr: (%d, %d)\n",
obj->type, obj->string.length);
goto amacout;
}
+
if (strncmp(obj->string.pointer, "_AUXMAC_#", 9) != 0 ||
strncmp(obj->string.pointer + 0x15, "#", 1) != 0) {
netif_warn(tp, probe, tp->netdev,
@@ -1688,7 +1889,7 @@ static struct tx_agg *r8152_get_tx_agg(struct r8152 *tp)
}
/* r8152_csum_workaround()
- * The hw limites the value the transport offset. When the offset is out of the
+ * The hw limits the value of the transport offset. When the offset is out of
* range, calculate the checksum by sw.
*/
static void r8152_csum_workaround(struct r8152 *tp, struct sk_buff *skb,
@@ -2178,6 +2379,7 @@ static void tx_bottom(struct r8152 *tp)
int res;
do {
+ struct net_device *netdev = tp->netdev;
struct tx_agg *agg;
if (skb_queue_empty(&tp->tx_queue))
@@ -2188,24 +2390,23 @@ static void tx_bottom(struct r8152 *tp)
break;
res = r8152_tx_agg_fill(tp, agg);
- if (res) {
- struct net_device *netdev = tp->netdev;
+ if (!res)
+ continue;
- if (res == -ENODEV) {
- rtl_set_unplug(tp);
- netif_device_detach(netdev);
- } else {
- struct net_device_stats *stats = &netdev->stats;
- unsigned long flags;
+ if (res == -ENODEV) {
+ rtl_set_unplug(tp);
+ netif_device_detach(netdev);
+ } else {
+ struct net_device_stats *stats = &netdev->stats;
+ unsigned long flags;
- netif_warn(tp, tx_err, netdev,
- "failed tx_urb %d\n", res);
- stats->tx_dropped += agg->skb_num;
+ netif_warn(tp, tx_err, netdev,
+ "failed tx_urb %d\n", res);
+ stats->tx_dropped += agg->skb_num;
- spin_lock_irqsave(&tp->tx_lock, flags);
- list_add_tail(&agg->list, &tp->tx_free);
- spin_unlock_irqrestore(&tp->tx_lock, flags);
- }
+ spin_lock_irqsave(&tp->tx_lock, flags);
+ list_add_tail(&agg->list, &tp->tx_free);
+ spin_unlock_irqrestore(&tp->tx_lock, flags);
}
} while (res == 0);
}
@@ -3226,6 +3427,688 @@ static void rtl_reset_bmu(struct r8152 *tp)
ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
}
+/* Clear the bp to stop the firmware before loading a new one */
+static void rtl_clear_bp(struct r8152 *tp, u16 type)
+{
+ switch (tp->version) {
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_07:
+ break;
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ ocp_write_byte(tp, type, PLA_BP_EN, 0);
+ break;
+ case RTL_VER_08:
+ case RTL_VER_09:
+ default:
+ if (type == MCU_TYPE_USB) {
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
+
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_10, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_11, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_12, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_13, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_14, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_15, 0);
+ } else {
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
+ }
+ break;
+ }
+
+ ocp_write_word(tp, type, PLA_BP_0, 0);
+ ocp_write_word(tp, type, PLA_BP_1, 0);
+ ocp_write_word(tp, type, PLA_BP_2, 0);
+ ocp_write_word(tp, type, PLA_BP_3, 0);
+ ocp_write_word(tp, type, PLA_BP_4, 0);
+ ocp_write_word(tp, type, PLA_BP_5, 0);
+ ocp_write_word(tp, type, PLA_BP_6, 0);
+ ocp_write_word(tp, type, PLA_BP_7, 0);
+
+ /* wait 3 ms to make sure the firmware is stopped */
+ usleep_range(3000, 6000);
+ ocp_write_word(tp, type, PLA_BP_BA, 0);
+}
+
+static int r8153_patch_request(struct r8152 *tp, bool request)
+{
+ u16 data;
+ int i;
+
+ data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD);
+ if (request)
+ data |= PATCH_REQUEST;
+ else
+ data &= ~PATCH_REQUEST;
+ ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data);
+
+ for (i = 0; request && i < 5000; i++) {
+ usleep_range(1000, 2000);
+ if (ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)
+ break;
+ }
+
+ if (request && !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
+ netif_err(tp, drv, tp->netdev, "patch request fail\n");
+ r8153_patch_request(tp, false);
+ return -ETIME;
+ } else {
+ return 0;
+ }
+}
+
+static int r8153_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key)
+{
+ if (r8153_patch_request(tp, true)) {
+ dev_err(&tp->intf->dev, "patch request fail\n");
+ return -ETIME;
+ }
+
+ sram_write(tp, key_addr, patch_key);
+ sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
+
+ return 0;
+}
+
+static int r8153_post_ram_code(struct r8152 *tp, u16 key_addr)
+{
+ u16 data;
+
+ sram_write(tp, 0x0000, 0x0000);
+
+ data = ocp_reg_read(tp, OCP_PHY_LOCK);
+ data &= ~PATCH_LOCK;
+ ocp_reg_write(tp, OCP_PHY_LOCK, data);
+
+ sram_write(tp, key_addr, 0x0000);
+
+ r8153_patch_request(tp, false);
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
+
+ return 0;
+}
+
+static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy)
+{
+ u32 length;
+ u16 fw_offset, fw_reg, ba_reg, patch_en_addr, mode_reg, bp_start;
+ bool rc = false;
+
+ switch (tp->version) {
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ fw_reg = 0xa014;
+ ba_reg = 0xa012;
+ patch_en_addr = 0xa01a;
+ mode_reg = 0xb820;
+ bp_start = 0xa000;
+ break;
+ default:
+ goto out;
+ }
+
+ fw_offset = __le16_to_cpu(phy->fw_offset);
+ if (fw_offset < sizeof(*phy)) {
+ dev_err(&tp->intf->dev, "fw_offset too small\n");
+ goto out;
+ }
+
+ length = __le32_to_cpu(phy->blk_hdr.length);
+ if (length < fw_offset) {
+ dev_err(&tp->intf->dev, "invalid fw_offset\n");
+ goto out;
+ }
+
+ length -= __le16_to_cpu(phy->fw_offset);
+ if (!length || (length & 1)) {
+ dev_err(&tp->intf->dev, "invalid block length\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->fw_reg) != fw_reg) {
+ dev_err(&tp->intf->dev, "invalid register to load firmware\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->ba_reg) != ba_reg) {
+ dev_err(&tp->intf->dev, "invalid base address register\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->patch_en_addr) != patch_en_addr) {
+ dev_err(&tp->intf->dev,
+ "invalid patch mode enabled register\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->mode_reg) != mode_reg) {
+ dev_err(&tp->intf->dev,
+ "invalid register to switch the mode\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->bp_start) != bp_start) {
+ dev_err(&tp->intf->dev,
+ "invalid start register of break point\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->bp_num) > 4) {
+ dev_err(&tp->intf->dev, "invalid break point number\n");
+ goto out;
+ }
+
+ rc = true;
+out:
+ return rc;
+}
+
+static bool rtl8152_is_fw_mac_ok(struct r8152 *tp, struct fw_mac *mac)
+{
+ u16 fw_reg, bp_ba_addr, bp_en_addr, bp_start, fw_offset;
+ bool rc = false;
+ u32 length, type;
+ int i, max_bp;
+
+ type = __le32_to_cpu(mac->blk_hdr.type);
+ if (type == RTL_FW_PLA) {
+ switch (tp->version) {
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_07:
+ fw_reg = 0xf800;
+ bp_ba_addr = PLA_BP_BA;
+ bp_en_addr = 0;
+ bp_start = PLA_BP_0;
+ max_bp = 8;
+ break;
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ case RTL_VER_08:
+ case RTL_VER_09:
+ fw_reg = 0xf800;
+ bp_ba_addr = PLA_BP_BA;
+ bp_en_addr = PLA_BP_EN;
+ bp_start = PLA_BP_0;
+ max_bp = 8;
+ break;
+ default:
+ goto out;
+ }
+ } else if (type == RTL_FW_USB) {
+ switch (tp->version) {
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ fw_reg = 0xf800;
+ bp_ba_addr = USB_BP_BA;
+ bp_en_addr = USB_BP_EN;
+ bp_start = USB_BP_0;
+ max_bp = 8;
+ break;
+ case RTL_VER_08:
+ case RTL_VER_09:
+ fw_reg = 0xe600;
+ bp_ba_addr = USB_BP_BA;
+ bp_en_addr = USB_BP2_EN;
+ bp_start = USB_BP_0;
+ max_bp = 16;
+ break;
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_07:
+ default:
+ goto out;
+ }
+ } else {
+ goto out;
+ }
+
+ fw_offset = __le16_to_cpu(mac->fw_offset);
+ if (fw_offset < sizeof(*mac)) {
+ dev_err(&tp->intf->dev, "fw_offset too small\n");
+ goto out;
+ }
+
+ length = __le32_to_cpu(mac->blk_hdr.length);
+ if (length < fw_offset) {
+ dev_err(&tp->intf->dev, "invalid fw_offset\n");
+ goto out;
+ }
+
+ length -= fw_offset;
+ if (length < 4 || (length & 3)) {
+ dev_err(&tp->intf->dev, "invalid block length\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(mac->fw_reg) != fw_reg) {
+ dev_err(&tp->intf->dev, "invalid register to load firmware\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(mac->bp_ba_addr) != bp_ba_addr) {
+ dev_err(&tp->intf->dev, "invalid base address register\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(mac->bp_en_addr) != bp_en_addr) {
+ dev_err(&tp->intf->dev, "invalid enabled mask register\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(mac->bp_start) != bp_start) {
+ dev_err(&tp->intf->dev,
+ "invalid start register of break point\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(mac->bp_num) > max_bp) {
+ dev_err(&tp->intf->dev, "invalid break point number\n");
+ goto out;
+ }
+
+ for (i = __le16_to_cpu(mac->bp_num); i < max_bp; i++) {
+ if (mac->bp[i]) {
+ dev_err(&tp->intf->dev, "unused bp%u is not zero\n", i);
+ goto out;
+ }
+ }
+
+ rc = true;
+out:
+ return rc;
+}
+
+/* Verify the checksum for the firmware file. It is calculated from the version
+ * field to the end of the file. Compare the result with the checksum field to
+ * make sure the file is correct.
+ */
+static long rtl8152_fw_verify_checksum(struct r8152 *tp,
+ struct fw_header *fw_hdr, size_t size)
+{
+ unsigned char checksum[sizeof(fw_hdr->checksum)];
+ struct crypto_shash *alg;
+ struct shash_desc *sdesc;
+ size_t len;
+ long rc;
+
+ alg = crypto_alloc_shash("sha256", 0, 0);
+ if (IS_ERR(alg)) {
+ rc = PTR_ERR(alg);
+ goto out;
+ }
+
+ if (crypto_shash_digestsize(alg) != sizeof(fw_hdr->checksum)) {
+ rc = -EFAULT;
+ dev_err(&tp->intf->dev, "digestsize incorrect (%u)\n",
+ crypto_shash_digestsize(alg));
+ goto free_shash;
+ }
+
+ len = sizeof(*sdesc) + crypto_shash_descsize(alg);
+ sdesc = kmalloc(len, GFP_KERNEL);
+ if (!sdesc) {
+ rc = -ENOMEM;
+ goto free_shash;
+ }
+ sdesc->tfm = alg;
+
+ len = size - sizeof(fw_hdr->checksum);
+ rc = crypto_shash_digest(sdesc, fw_hdr->version, len, checksum);
+ kfree(sdesc);
+ if (rc)
+ goto free_shash;
+
+ if (memcmp(fw_hdr->checksum, checksum, sizeof(fw_hdr->checksum))) {
+ dev_err(&tp->intf->dev, "checksum fail\n");
+ rc = -EFAULT;
+ }
+
+free_shash:
+ crypto_free_shash(alg);
+out:
+ return rc;
+}
+
+static long rtl8152_check_firmware(struct r8152 *tp, struct rtl_fw *rtl_fw)
+{
+ const struct firmware *fw = rtl_fw->fw;
+ struct fw_header *fw_hdr = (struct fw_header *)fw->data;
+ struct fw_mac *pla = NULL, *usb = NULL;
+ struct fw_phy_patch_key *start = NULL;
+ struct fw_phy_nc *phy_nc = NULL;
+ struct fw_block *stop = NULL;
+ long ret = -EFAULT;
+ int i;
+
+ if (fw->size < sizeof(*fw_hdr)) {
+ dev_err(&tp->intf->dev, "file too small\n");
+ goto fail;
+ }
+
+ ret = rtl8152_fw_verify_checksum(tp, fw_hdr, fw->size);
+ if (ret)
+ goto fail;
+
+ ret = -EFAULT;
+
+ for (i = sizeof(*fw_hdr); i < fw->size;) {
+ struct fw_block *block = (struct fw_block *)&fw->data[i];
+ u32 type;
+
+ if ((i + sizeof(*block)) > fw->size)
+ goto fail;
+
+ type = __le32_to_cpu(block->type);
+ switch (type) {
+ case RTL_FW_END:
+ if (__le32_to_cpu(block->length) != sizeof(*block))
+ goto fail;
+ goto fw_end;
+ case RTL_FW_PLA:
+ if (pla) {
+ dev_err(&tp->intf->dev,
+ "multiple PLA firmware encountered");
+ goto fail;
+ }
+
+ pla = (struct fw_mac *)block;
+ if (!rtl8152_is_fw_mac_ok(tp, pla)) {
+ dev_err(&tp->intf->dev,
+ "check PLA firmware failed\n");
+ goto fail;
+ }
+ break;
+ case RTL_FW_USB:
+ if (usb) {
+ dev_err(&tp->intf->dev,
+ "multiple USB firmware encountered");
+ goto fail;
+ }
+
+ usb = (struct fw_mac *)block;
+ if (!rtl8152_is_fw_mac_ok(tp, usb)) {
+ dev_err(&tp->intf->dev,
+ "check USB firmware failed\n");
+ goto fail;
+ }
+ break;
+ case RTL_FW_PHY_START:
+ if (start || phy_nc || stop) {
+ dev_err(&tp->intf->dev,
+ "check PHY_START fail\n");
+ goto fail;
+ }
+
+ if (__le32_to_cpu(block->length) != sizeof(*start)) {
+ dev_err(&tp->intf->dev,
+ "Invalid length for PHY_START\n");
+ goto fail;
+ }
+
+ start = (struct fw_phy_patch_key *)block;
+ break;
+ case RTL_FW_PHY_STOP:
+ if (stop || !start) {
+ dev_err(&tp->intf->dev,
+ "Check PHY_STOP fail\n");
+ goto fail;
+ }
+
+ if (__le32_to_cpu(block->length) != sizeof(*block)) {
+ dev_err(&tp->intf->dev,
+ "Invalid length for PHY_STOP\n");
+ goto fail;
+ }
+
+ stop = block;
+ break;
+ case RTL_FW_PHY_NC:
+ if (!start || stop) {
+ dev_err(&tp->intf->dev,
+ "check PHY_NC fail\n");
+ goto fail;
+ }
+
+ if (phy_nc) {
+ dev_err(&tp->intf->dev,
+ "multiple PHY NC encountered\n");
+ goto fail;
+ }
+
+ phy_nc = (struct fw_phy_nc *)block;
+ if (!rtl8152_is_fw_phy_nc_ok(tp, phy_nc)) {
+ dev_err(&tp->intf->dev,
+ "check PHY NC firmware failed\n");
+ goto fail;
+ }
+
+ break;
+ default:
+ dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
+ type);
+ break;
+ }
+
+ /* next block */
+ i += ALIGN(__le32_to_cpu(block->length), 8);
+ }
+
+fw_end:
+ if ((phy_nc || start) && !stop) {
+ dev_err(&tp->intf->dev, "without PHY_STOP\n");
+ goto fail;
+ }
+
+ return 0;
+fail:
+ return ret;
+}
+
+static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
+{
+ u16 mode_reg, bp_index;
+ u32 length, i, num;
+ __le16 *data;
+
+ mode_reg = __le16_to_cpu(phy->mode_reg);
+ sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_pre));
+ sram_write(tp, __le16_to_cpu(phy->ba_reg),
+ __le16_to_cpu(phy->ba_data));
+
+ length = __le32_to_cpu(phy->blk_hdr.length);
+ length -= __le16_to_cpu(phy->fw_offset);
+ num = length / 2;
+ data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
+
+ ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
+ for (i = 0; i < num; i++)
+ ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
+
+ sram_write(tp, __le16_to_cpu(phy->patch_en_addr),
+ __le16_to_cpu(phy->patch_en_value));
+
+ bp_index = __le16_to_cpu(phy->bp_start);
+ num = __le16_to_cpu(phy->bp_num);
+ for (i = 0; i < num; i++) {
+ sram_write(tp, bp_index, __le16_to_cpu(phy->bp[i]));
+ bp_index += 2;
+ }
+
+ sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_post));
+
+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
+}
+
+static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
+{
+ u16 bp_en_addr, bp_index, type, bp_num, fw_ver_reg;
+ u32 length;
+ u8 *data;
+ int i;
+
+ switch (__le32_to_cpu(mac->blk_hdr.type)) {
+ case RTL_FW_PLA:
+ type = MCU_TYPE_PLA;
+ break;
+ case RTL_FW_USB:
+ type = MCU_TYPE_USB;
+ break;
+ default:
+ return;
+ }
+
+ rtl_clear_bp(tp, type);
+
+ /* Enable backup/restore of MACDBG. This is required after clearing PLA
+ * break points and before applying the PLA firmware.
+ */
+ if (tp->version == RTL_VER_04 && type == MCU_TYPE_PLA &&
+ !(ocp_read_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST) & DEBUG_OE)) {
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_PRE, DEBUG_LTSSM);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST, DEBUG_LTSSM);
+ }
+
+ length = __le32_to_cpu(mac->blk_hdr.length);
+ length -= __le16_to_cpu(mac->fw_offset);
+
+ data = (u8 *)mac;
+ data += __le16_to_cpu(mac->fw_offset);
+
+ generic_ocp_write(tp, __le16_to_cpu(mac->fw_reg), 0xff, length, data,
+ type);
+
+ ocp_write_word(tp, type, __le16_to_cpu(mac->bp_ba_addr),
+ __le16_to_cpu(mac->bp_ba_value));
+
+ bp_index = __le16_to_cpu(mac->bp_start);
+ bp_num = __le16_to_cpu(mac->bp_num);
+ for (i = 0; i < bp_num; i++) {
+ ocp_write_word(tp, type, bp_index, __le16_to_cpu(mac->bp[i]));
+ bp_index += 2;
+ }
+
+ bp_en_addr = __le16_to_cpu(mac->bp_en_addr);
+ if (bp_en_addr)
+ ocp_write_word(tp, type, bp_en_addr,
+ __le16_to_cpu(mac->bp_en_value));
+
+ fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
+ if (fw_ver_reg)
+ ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
+ mac->fw_ver_data);
+
+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
+}
+
+static void rtl8152_apply_firmware(struct r8152 *tp)
+{
+ struct rtl_fw *rtl_fw = &tp->rtl_fw;
+ const struct firmware *fw;
+ struct fw_header *fw_hdr;
+ struct fw_phy_patch_key *key;
+ u16 key_addr = 0;
+ int i;
+
+ if (IS_ERR_OR_NULL(rtl_fw->fw))
+ return;
+
+ fw = rtl_fw->fw;
+ fw_hdr = (struct fw_header *)fw->data;
+
+ if (rtl_fw->pre_fw)
+ rtl_fw->pre_fw(tp);
+
+ for (i = offsetof(struct fw_header, blocks); i < fw->size;) {
+ struct fw_block *block = (struct fw_block *)&fw->data[i];
+
+ switch (__le32_to_cpu(block->type)) {
+ case RTL_FW_END:
+ goto post_fw;
+ case RTL_FW_PLA:
+ case RTL_FW_USB:
+ rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
+ break;
+ case RTL_FW_PHY_START:
+ key = (struct fw_phy_patch_key *)block;
+ key_addr = __le16_to_cpu(key->key_reg);
+ r8153_pre_ram_code(tp, key_addr,
+ __le16_to_cpu(key->key_data));
+ break;
+ case RTL_FW_PHY_STOP:
+ WARN_ON(!key_addr);
+ r8153_post_ram_code(tp, key_addr);
+ break;
+ case RTL_FW_PHY_NC:
+ rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
+ break;
+ default:
+ break;
+ }
+
+ i += ALIGN(__le32_to_cpu(block->length), 8);
+ }
+
+post_fw:
+ if (rtl_fw->post_fw)
+ rtl_fw->post_fw(tp);
+
+ strscpy(rtl_fw->version, fw_hdr->version, RTL_VER_SIZE);
+ dev_info(&tp->intf->dev, "load %s successfully\n", rtl_fw->version);
+}
+
+static void rtl8152_release_firmware(struct r8152 *tp)
+{
+ struct rtl_fw *rtl_fw = &tp->rtl_fw;
+
+ if (!IS_ERR_OR_NULL(rtl_fw->fw)) {
+ release_firmware(rtl_fw->fw);
+ rtl_fw->fw = NULL;
+ }
+}
+
+static int rtl8152_request_firmware(struct r8152 *tp)
+{
+ struct rtl_fw *rtl_fw = &tp->rtl_fw;
+ long rc;
+
+ if (rtl_fw->fw || !rtl_fw->fw_name) {
+ dev_info(&tp->intf->dev, "skip request firmware\n");
+ rc = 0;
+ goto result;
+ }
+
+ rc = request_firmware(&rtl_fw->fw, rtl_fw->fw_name, &tp->intf->dev);
+ if (rc < 0)
+ goto result;
+
+ rc = rtl8152_check_firmware(tp, rtl_fw);
+ if (rc < 0)
+ release_firmware(rtl_fw->fw);
+
+result:
+ if (rc) {
+ rtl_fw->fw = ERR_PTR(rc);
+
+ dev_warn(&tp->intf->dev,
+ "unable to load firmware patch %s (%ld)\n",
+ rtl_fw->fw_name, rc);
+ }
+
+ return rc;
+}
+
static void r8152_aldps_en(struct r8152 *tp, bool enable)
{
if (enable) {
@@ -3370,6 +4253,7 @@ static void rtl8152_disable(struct r8152 *tp)
static void r8152b_hw_phy_cfg(struct r8152 *tp)
{
+ rtl8152_apply_firmware(tp);
rtl_eee_enable(tp, tp->eee_en);
r8152_aldps_en(tp, true);
r8152b_enable_fc(tp);
@@ -3377,11 +4261,23 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp)
set_bit(PHY_RESET, &tp->flags);
}
-static void r8152b_exit_oob(struct r8152 *tp)
+static void wait_oob_link_list_ready(struct r8152 *tp)
{
u32 ocp_data;
int i;
+ for (i = 0; i < 1000; i++) {
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+ if (ocp_data & LINK_LIST_READY)
+ break;
+ usleep_range(1000, 2000);
+ }
+}
+
+static void r8152b_exit_oob(struct r8152 *tp)
+{
+ u32 ocp_data;
+
ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
ocp_data &= ~RCR_ACPT_ALL;
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
@@ -3399,23 +4295,13 @@ static void r8152b_exit_oob(struct r8152 *tp)
ocp_data &= ~MCU_BORW_EN;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
- for (i = 0; i < 1000; i++) {
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- if (ocp_data & LINK_LIST_READY)
- break;
- usleep_range(1000, 2000);
- }
+ wait_oob_link_list_ready(tp);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
ocp_data |= RE_INIT_LL;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
- for (i = 0; i < 1000; i++) {
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- if (ocp_data & LINK_LIST_READY)
- break;
- usleep_range(1000, 2000);
- }
+ wait_oob_link_list_ready(tp);
rtl8152_nic_reset(tp);
@@ -3457,7 +4343,6 @@ static void r8152b_exit_oob(struct r8152 *tp)
static void r8152b_enter_oob(struct r8152 *tp)
{
u32 ocp_data;
- int i;
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
ocp_data &= ~NOW_IS_OOB;
@@ -3469,23 +4354,13 @@ static void r8152b_enter_oob(struct r8152 *tp)
rtl_disable(tp);
- for (i = 0; i < 1000; i++) {
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- if (ocp_data & LINK_LIST_READY)
- break;
- usleep_range(1000, 2000);
- }
+ wait_oob_link_list_ready(tp);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
ocp_data |= RE_INIT_LL;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
- for (i = 0; i < 1000; i++) {
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- if (ocp_data & LINK_LIST_READY)
- break;
- usleep_range(1000, 2000);
- }
+ wait_oob_link_list_ready(tp);
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
@@ -3506,31 +4381,124 @@ static void r8152b_enter_oob(struct r8152 *tp)
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
}
-static int r8153_patch_request(struct r8152 *tp, bool request)
+static int r8153_pre_firmware_1(struct r8152 *tp)
{
- u16 data;
int i;
- data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD);
- if (request)
- data |= PATCH_REQUEST;
- else
- data &= ~PATCH_REQUEST;
- ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data);
+ /* Wait till the WTD timer is ready. It would take at most 104 ms. */
+ for (i = 0; i < 104; i++) {
+ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL);
- for (i = 0; request && i < 5000; i++) {
- usleep_range(1000, 2000);
- if (ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)
+ if (!(ocp_data & WTD1_EN))
break;
+ usleep_range(1000, 2000);
}
- if (request && !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
- netif_err(tp, drv, tp->netdev, "patch request fail\n");
- r8153_patch_request(tp, false);
- return -ETIME;
- } else {
- return 0;
+ return 0;
+}
+
+static int r8153_post_firmware_1(struct r8152 *tp)
+{
+ /* set USB_BP_4 to support USB_SPEED_SUPER only */
+ if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER)
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_4, BP4_SUPER_ONLY);
+
+ /* reset UPHY timer to 36 ms */
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
+
+ return 0;
+}
+
+static int r8153_pre_firmware_2(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ r8153_pre_firmware_1(tp);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
+ ocp_data &= ~FW_FIX_SUSPEND;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
+
+ return 0;
+}
+
+static int r8153_post_firmware_2(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ /* enable bp0 if support USB_SPEED_SUPER only */
+ if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER) {
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
+ ocp_data |= BIT(0);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
+ }
+
+ /* reset UPHY timer to 36 ms */
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
+
+ /* enable U3P3 check, set the counter to 4 */
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, U3P3_CHECK_EN | 4);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
+ ocp_data |= FW_FIX_SUSPEND;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
+ ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+
+ return 0;
+}
+
+static int r8153_post_firmware_3(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
+ ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
+ ocp_data |= FW_IP_RESET_EN;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+
+ return 0;
+}
+
+static int r8153b_pre_firmware_1(struct r8152 *tp)
+{
+ /* enable fc timer and set timer to 1 second. */
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
+ CTRL_TIMER_EN | (1000 / 8));
+
+ return 0;
+}
+
+static int r8153b_post_firmware_1(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ /* enable bp0 for RTL8153-BND */
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+ if (ocp_data & BND_MASK) {
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
+ ocp_data |= BIT(0);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
}
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
+ ocp_data |= FLOW_CTRL_PATCH_OPT;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+ ocp_data |= FC_PATCH_TASK;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
+ ocp_data |= FW_IP_RESET_EN;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+
+ return 0;
}
static void r8153_aldps_en(struct r8152 *tp, bool enable)
@@ -3567,6 +4535,8 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
/* disable EEE before updating the PHY parameters */
rtl_eee_enable(tp, false);
+ rtl8152_apply_firmware(tp);
+
if (tp->version == RTL_VER_03) {
data = ocp_reg_read(tp, OCP_EEE_CFG);
data &= ~CTAP_SHORT_EN;
@@ -3639,6 +4609,8 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)
/* disable EEE before updating the PHY parameters */
rtl_eee_enable(tp, false);
+ rtl8152_apply_firmware(tp);
+
r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
data = sram_read(tp, SRAM_GREEN_CFG);
@@ -3711,7 +4683,6 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)
static void r8153_first_init(struct r8152 *tp)
{
u32 ocp_data;
- int i;
r8153_mac_clk_spd(tp, false);
rxdy_gated_en(tp, true);
@@ -3732,23 +4703,13 @@ static void r8153_first_init(struct r8152 *tp)
ocp_data &= ~MCU_BORW_EN;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
- for (i = 0; i < 1000; i++) {
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- if (ocp_data & LINK_LIST_READY)
- break;
- usleep_range(1000, 2000);
- }
+ wait_oob_link_list_ready(tp);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
ocp_data |= RE_INIT_LL;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
- for (i = 0; i < 1000; i++) {
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- if (ocp_data & LINK_LIST_READY)
- break;
- usleep_range(1000, 2000);
- }
+ wait_oob_link_list_ready(tp);
rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
@@ -3773,7 +4734,6 @@ static void r8153_first_init(struct r8152 *tp)
static void r8153_enter_oob(struct r8152 *tp)
{
u32 ocp_data;
- int i;
r8153_mac_clk_spd(tp, true);
@@ -3784,23 +4744,13 @@ static void r8153_enter_oob(struct r8152 *tp)
rtl_disable(tp);
rtl_reset_bmu(tp);
- for (i = 0; i < 1000; i++) {
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- if (ocp_data & LINK_LIST_READY)
- break;
- usleep_range(1000, 2000);
- }
+ wait_oob_link_list_ready(tp);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
ocp_data |= RE_INIT_LL;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
- for (i = 0; i < 1000; i++) {
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- if (ocp_data & LINK_LIST_READY)
- break;
- usleep_range(1000, 2000);
- }
+ wait_oob_link_list_ready(tp);
ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
@@ -4187,11 +5137,22 @@ static void rtl_hw_phy_work_func_t(struct work_struct *work)
mutex_lock(&tp->control);
+ if (rtl8152_request_firmware(tp) == -ENODEV && tp->rtl_fw.retry) {
+ tp->rtl_fw.retry = false;
+ tp->rtl_fw.fw = NULL;
+
+ /* Delay execution in case request_firmware() is not ready yet.
+ */
+ queue_delayed_work(system_long_wq, &tp->hw_phy_work, HZ * 10);
+ goto ignore_once;
+ }
+
tp->rtl_ops.hw_phy_cfg(tp);
rtl8152_set_speed(tp, tp->autoneg, tp->speed, tp->duplex,
tp->advertising);
+ignore_once:
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
@@ -4229,6 +5190,11 @@ static int rtl8152_open(struct net_device *netdev)
struct r8152 *tp = netdev_priv(netdev);
int res = 0;
+ if (work_busy(&tp->hw_phy_work.work) & WORK_BUSY_PENDING) {
+ cancel_delayed_work_sync(&tp->hw_phy_work);
+ rtl_hw_phy_work_func_t(&tp->hw_phy_work.work);
+ }
+
res = alloc_all_mem(tp);
if (res)
goto out;
@@ -4283,10 +5249,10 @@ static int rtl8152_close(struct net_device *netdev)
unregister_pm_notifier(&tp->pm_notifier);
#endif
tasklet_disable(&tp->tx_tl);
- napi_disable(&tp->napi);
clear_bit(WORK_ENABLE, &tp->flags);
usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
+ napi_disable(&tp->napi);
netif_stop_queue(netdev);
res = usb_autopm_get_interface(tp->intf);
@@ -4552,10 +5518,10 @@ static int rtl8152_pre_reset(struct usb_interface *intf)
netif_stop_queue(netdev);
tasklet_disable(&tp->tx_tl);
- napi_disable(&tp->napi);
clear_bit(WORK_ENABLE, &tp->flags);
usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
+ napi_disable(&tp->napi);
if (netif_carrier_ok(netdev)) {
mutex_lock(&tp->control);
tp->rtl_ops.disable(tp);
@@ -4673,7 +5639,7 @@ static int rtl8152_system_resume(struct r8152 *tp)
netif_device_attach(netdev);
- if (netif_running(netdev) && netdev->flags & IFF_UP) {
+ if (netif_running(netdev) && (netdev->flags & IFF_UP)) {
tp->rtl_ops.up(tp);
netif_carrier_off(netdev);
set_bit(WORK_ENABLE, &tp->flags);
@@ -4875,6 +5841,9 @@ static void rtl8152_get_drvinfo(struct net_device *netdev,
strlcpy(info->driver, MODULENAME, sizeof(info->driver));
strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info));
+ if (!IS_ERR_OR_NULL(tp->rtl_fw.fw))
+ strlcpy(info->fw_version, tp->rtl_fw.version,
+ sizeof(info->fw_version));
}
static
@@ -5244,9 +6213,15 @@ static int rtl8152_set_tunable(struct net_device *netdev,
}
if (tp->rx_copybreak != val) {
- napi_disable(&tp->napi);
- tp->rx_copybreak = val;
- napi_enable(&tp->napi);
+ if (netdev->flags & IFF_UP) {
+ mutex_lock(&tp->control);
+ napi_disable(&tp->napi);
+ tp->rx_copybreak = val;
+ napi_enable(&tp->napi);
+ mutex_unlock(&tp->control);
+ } else {
+ tp->rx_copybreak = val;
+ }
}
break;
default:
@@ -5274,9 +6249,15 @@ static int rtl8152_set_ringparam(struct net_device *netdev,
return -EINVAL;
if (tp->rx_pending != ring->rx_pending) {
- napi_disable(&tp->napi);
- tp->rx_pending = ring->rx_pending;
- napi_enable(&tp->napi);
+ if (netdev->flags & IFF_UP) {
+ mutex_lock(&tp->control);
+ napi_disable(&tp->napi);
+ tp->rx_pending = ring->rx_pending;
+ napi_enable(&tp->napi);
+ mutex_unlock(&tp->control);
+ } else {
+ tp->rx_pending = ring->rx_pending;
+ }
}
return 0;
@@ -5499,6 +6480,47 @@ static int rtl_ops_init(struct r8152 *tp)
return ret;
}
+#define FIRMWARE_8153A_2 "rtl_nic/rtl8153a-2.fw"
+#define FIRMWARE_8153A_3 "rtl_nic/rtl8153a-3.fw"
+#define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw"
+#define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw"
+
+MODULE_FIRMWARE(FIRMWARE_8153A_2);
+MODULE_FIRMWARE(FIRMWARE_8153A_3);
+MODULE_FIRMWARE(FIRMWARE_8153A_4);
+MODULE_FIRMWARE(FIRMWARE_8153B_2);
+
+static int rtl_fw_init(struct r8152 *tp)
+{
+ struct rtl_fw *rtl_fw = &tp->rtl_fw;
+
+ switch (tp->version) {
+ case RTL_VER_04:
+ rtl_fw->fw_name = FIRMWARE_8153A_2;
+ rtl_fw->pre_fw = r8153_pre_firmware_1;
+ rtl_fw->post_fw = r8153_post_firmware_1;
+ break;
+ case RTL_VER_05:
+ rtl_fw->fw_name = FIRMWARE_8153A_3;
+ rtl_fw->pre_fw = r8153_pre_firmware_2;
+ rtl_fw->post_fw = r8153_post_firmware_2;
+ break;
+ case RTL_VER_06:
+ rtl_fw->fw_name = FIRMWARE_8153A_4;
+ rtl_fw->post_fw = r8153_post_firmware_3;
+ break;
+ case RTL_VER_09:
+ rtl_fw->fw_name = FIRMWARE_8153B_2;
+ rtl_fw->pre_fw = r8153b_pre_firmware_1;
+ rtl_fw->post_fw = r8153b_post_firmware_1;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
static u8 rtl_get_version(struct usb_interface *intf)
{
struct usb_device *udev = interface_to_usbdev(intf);
@@ -5606,6 +6628,8 @@ static int rtl8152_probe(struct usb_interface *intf,
if (ret)
goto out;
+ rtl_fw_init(tp);
+
mutex_init(&tp->control);
INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t);
@@ -5632,8 +6656,13 @@ static int rtl8152_probe(struct usb_interface *intf,
netdev->hw_features &= ~NETIF_F_RXCSUM;
}
+ if (le16_to_cpu(udev->descriptor.idVendor) == VENDOR_ID_LENOVO &&
+ le16_to_cpu(udev->descriptor.idProduct) == 0x3082)
+ set_bit(LENOVO_MACPASSTHRU, &tp->flags);
+
if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x3011 && udev->serial &&
- (!strcmp(udev->serial, "000001000000") || !strcmp(udev->serial, "000002000000"))) {
+ (!strcmp(udev->serial, "000001000000") ||
+ !strcmp(udev->serial, "000002000000"))) {
dev_info(&udev->dev, "Dell TB16 Dock, disable RX aggregation");
set_bit(DELL_TB_RX_AGG_BUG, &tp->flags);
}
@@ -5676,6 +6705,10 @@ static int rtl8152_probe(struct usb_interface *intf,
intf->needs_remote_wakeup = 1;
tp->rtl_ops.init(tp);
+#if IS_BUILTIN(CONFIG_USB_RTL8152)
+ /* Retry in case request_firmware() is not ready yet. */
+ tp->rtl_fw.retry = true;
+#endif
queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
set_ethernet_addr(tp);
@@ -5721,6 +6754,7 @@ static void rtl8152_disconnect(struct usb_interface *intf)
tasklet_kill(&tp->tx_tl);
cancel_delayed_work_sync(&tp->hw_phy_work);
tp->rtl_ops.unload(tp);
+ rtl8152_release_firmware(tp);
free_netdev(tp->netdev);
}
}
@@ -5752,9 +6786,11 @@ static const struct usb_device_id rtl8152_table[] = {
{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x304f)},
{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3062)},
{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3069)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3082)},
{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x7205)},
{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x720c)},
{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x7214)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0xa387)},
{REALTEK_USB_DEVICE(VENDOR_ID_LINKSYS, 0x0041)},
{REALTEK_USB_DEVICE(VENDOR_ID_NVIDIA, 0x09ff)},
{REALTEK_USB_DEVICE(VENDOR_ID_TPLINK, 0x0601)},