summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath5k
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath5k')
-rw-r--r--drivers/net/wireless/ath5k/Makefile12
-rw-r--r--drivers/net/wireless/ath5k/ath5k.h619
-rw-r--r--drivers/net/wireless/ath5k/attach.c359
-rw-r--r--drivers/net/wireless/ath5k/base.c574
-rw-r--r--drivers/net/wireless/ath5k/base.h10
-rw-r--r--drivers/net/wireless/ath5k/caps.c193
-rw-r--r--drivers/net/wireless/ath5k/debug.c4
-rw-r--r--drivers/net/wireless/ath5k/desc.c692
-rw-r--r--drivers/net/wireless/ath5k/desc.h (renamed from drivers/net/wireless/ath5k/hw.h)400
-rw-r--r--drivers/net/wireless/ath5k/dma.c605
-rw-r--r--drivers/net/wireless/ath5k/eeprom.c466
-rw-r--r--drivers/net/wireless/ath5k/eeprom.h215
-rw-r--r--drivers/net/wireless/ath5k/gpio.c176
-rw-r--r--drivers/net/wireless/ath5k/hw.c4529
-rw-r--r--drivers/net/wireless/ath5k/initvals.c22
-rw-r--r--drivers/net/wireless/ath5k/pcu.c1014
-rw-r--r--drivers/net/wireless/ath5k/phy.c12
-rw-r--r--drivers/net/wireless/ath5k/qcu.c488
-rw-r--r--drivers/net/wireless/ath5k/reg.h679
-rw-r--r--drivers/net/wireless/ath5k/reset.c931
20 files changed, 6314 insertions, 5686 deletions
diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath5k/Makefile
index 564ecd0c5d4b..719cfaef7085 100644
--- a/drivers/net/wireless/ath5k/Makefile
+++ b/drivers/net/wireless/ath5k/Makefile
@@ -1,6 +1,14 @@
-ath5k-y += base.o
-ath5k-y += hw.o
+ath5k-y += caps.o
ath5k-y += initvals.o
+ath5k-y += eeprom.o
+ath5k-y += gpio.o
+ath5k-y += desc.o
+ath5k-y += dma.o
+ath5k-y += qcu.o
+ath5k-y += pcu.o
ath5k-y += phy.o
+ath5k-y += reset.o
+ath5k-y += attach.o
+ath5k-y += base.o
ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o
obj-$(CONFIG_ATH5K) += ath5k.o
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
index 9102eea3c8bf..53ea439aff48 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -18,18 +18,23 @@
#ifndef _ATH5K_H
#define _ATH5K_H
-/* Set this to 1 to disable regulatory domain restrictions for channel tests.
- * WARNING: This is for debuging only and has side effects (eg. scan takes too
- * long and results timeouts). It's also illegal to tune to some of the
- * supported frequencies in some countries, so use this at your own risk,
- * you've been warned. */
+/* TODO: Clean up channel debuging -doesn't work anyway- and start
+ * working on reg. control code using all available eeprom information
+ * -rev. engineering needed- */
#define CHAN_DEBUG 0
#include <linux/io.h>
#include <linux/types.h>
#include <net/mac80211.h>
-#include "hw.h"
+/* RX/TX descriptor hw structs
+ * TODO: Driver part should only see sw structs */
+#include "desc.h"
+
+/* EEPROM structs/offsets
+ * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
+ * and clean up common bits, then introduce set/get functions in eeprom.c */
+#include "eeprom.h"
/* PCI IDs */
#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */
@@ -87,7 +92,92 @@
ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
/*
+ * AR5K REGISTER ACCESS
+ */
+
+/* Some macros to read/write fields */
+
+/* First shift, then mask */
+#define AR5K_REG_SM(_val, _flags) \
+ (((_val) << _flags##_S) & (_flags))
+
+/* First mask, then shift */
+#define AR5K_REG_MS(_val, _flags) \
+ (((_val) & (_flags)) >> _flags##_S)
+
+/* Some registers can hold multiple values of interest. For this
+ * reason when we want to write to these registers we must first
+ * retrieve the values which we do not want to clear (lets call this
+ * old_data) and then set the register with this and our new_value:
+ * ( old_data | new_value) */
+#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
+ (((_val) << _flags##_S) & (_flags)), _reg)
+
+#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \
+ (_mask)) | (_flags), _reg)
+
+#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \
+ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
+
+#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \
+ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
+
+/* Access to PHY registers */
+#define AR5K_PHY_READ(ah, _reg) \
+ ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
+
+#define AR5K_PHY_WRITE(ah, _reg, _val) \
+ ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
+
+/* Access QCU registers per queue */
+#define AR5K_REG_READ_Q(ah, _reg, _queue) \
+ (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \
+
+#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \
+ ath5k_hw_reg_write(ah, (1 << _queue), _reg)
+
+#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \
+ _reg |= 1 << _queue; \
+} while (0)
+
+#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \
+ _reg &= ~(1 << _queue); \
+} while (0)
+
+/* Used while writing initvals */
+#define AR5K_REG_WAIT(_i) do { \
+ if (_i % 64) \
+ udelay(1); \
+} while (0)
+
+/* Register dumps are done per operation mode */
+#define AR5K_INI_RFGAIN_5GHZ 0
+#define AR5K_INI_RFGAIN_2GHZ 1
+
+/* TODO: Clean this up */
+#define AR5K_INI_VAL_11A 0
+#define AR5K_INI_VAL_11A_TURBO 1
+#define AR5K_INI_VAL_11B 2
+#define AR5K_INI_VAL_11G 3
+#define AR5K_INI_VAL_11G_TURBO 4
+#define AR5K_INI_VAL_XR 0
+#define AR5K_INI_VAL_MAX 5
+
+#define AR5K_RF5111_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS
+#define AR5K_RF5112_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS
+
+/* Used for BSSID etc manipulation */
+#define AR5K_LOW_ID(_a)( \
+(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \
+)
+
+#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8)
+
+/*
* Some tuneable values (these should be changeable by the user)
+ * TODO: Make use of them and add more options OR use debug/configfs
*/
#define AR5K_TUNE_DMA_BEACON_RESP 2
#define AR5K_TUNE_SW_BEACON_RESP 10
@@ -98,13 +188,13 @@
#define AR5K_TUNE_REGISTER_TIMEOUT 20000
/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
* be the max value. */
-#define AR5K_TUNE_RSSI_THRES 129
+#define AR5K_TUNE_RSSI_THRES 129
/* This must be set when setting the RSSI threshold otherwise it can
* prevent a reset. If AR5K_RSSI_THR is read after writing to it
* the BMISS_THRES will be seen as 0, seems harware doesn't keep
* track of it. Max value depends on harware. For AR5210 this is just 7.
* For AR5211+ this seems to be up to 255. */
-#define AR5K_TUNE_BMISS_THRES 7
+#define AR5K_TUNE_BMISS_THRES 7
#define AR5K_TUNE_REGISTER_DWELL_TIME 20000
#define AR5K_TUNE_BEACON_INTERVAL 100
#define AR5K_TUNE_AIFS 2
@@ -123,6 +213,55 @@
#define AR5K_TUNE_ANT_DIVERSITY true
#define AR5K_TUNE_HWTXTRIES 4
+#define AR5K_INIT_CARR_SENSE_EN 1
+
+/*Swap RX/TX Descriptor for big endian archs*/
+#if defined(__BIG_ENDIAN)
+#define AR5K_INIT_CFG ( \
+ AR5K_CFG_SWTD | AR5K_CFG_SWRD \
+)
+#else
+#define AR5K_INIT_CFG 0x00000000
+#endif
+
+/* Initial values */
+#define AR5K_INIT_TX_LATENCY 502
+#define AR5K_INIT_USEC 39
+#define AR5K_INIT_USEC_TURBO 79
+#define AR5K_INIT_USEC_32 31
+#define AR5K_INIT_SLOT_TIME 396
+#define AR5K_INIT_SLOT_TIME_TURBO 480
+#define AR5K_INIT_ACK_CTS_TIMEOUT 1024
+#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800
+#define AR5K_INIT_PROG_IFS 920
+#define AR5K_INIT_PROG_IFS_TURBO 960
+#define AR5K_INIT_EIFS 3440
+#define AR5K_INIT_EIFS_TURBO 6880
+#define AR5K_INIT_SIFS 560
+#define AR5K_INIT_SIFS_TURBO 480
+#define AR5K_INIT_SH_RETRY 10
+#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY
+#define AR5K_INIT_SSH_RETRY 32
+#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY
+#define AR5K_INIT_TX_RETRY 10
+
+#define AR5K_INIT_TRANSMIT_LATENCY ( \
+ (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
+ (AR5K_INIT_USEC) \
+)
+#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \
+ (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
+ (AR5K_INIT_USEC_TURBO) \
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL ( \
+ (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \
+ (AR5K_INIT_PROG_IFS) \
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \
+ (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
+ (AR5K_INIT_PROG_IFS_TURBO) \
+)
+
/* token to use for aifs, cwmin, cwmax in MadWiFi */
#define AR5K_TXQ_USEDEFAULT ((u32) -1)
@@ -142,7 +281,9 @@ enum ath5k_radio {
AR5K_RF5112 = 2,
AR5K_RF2413 = 3,
AR5K_RF5413 = 4,
- AR5K_RF2425 = 5,
+ AR5K_RF2316 = 5,
+ AR5K_RF2317 = 6,
+ AR5K_RF2425 = 7,
};
/*
@@ -150,7 +291,7 @@ enum ath5k_radio {
*/
enum ath5k_srev_type {
- AR5K_VERSION_VER,
+ AR5K_VERSION_MAC,
AR5K_VERSION_RAD,
};
@@ -162,23 +303,24 @@ struct ath5k_srev_name {
#define AR5K_SREV_UNKNOWN 0xffff
-#define AR5K_SREV_VER_AR5210 0x00
-#define AR5K_SREV_VER_AR5311 0x10
-#define AR5K_SREV_VER_AR5311A 0x20
-#define AR5K_SREV_VER_AR5311B 0x30
-#define AR5K_SREV_VER_AR5211 0x40
-#define AR5K_SREV_VER_AR5212 0x50
-#define AR5K_SREV_VER_AR5213 0x55
-#define AR5K_SREV_VER_AR5213A 0x59
-#define AR5K_SREV_VER_AR2413 0x78
-#define AR5K_SREV_VER_AR2414 0x79
-#define AR5K_SREV_VER_AR2424 0xa0 /* PCI-E */
-#define AR5K_SREV_VER_AR5424 0xa3 /* PCI-E */
-#define AR5K_SREV_VER_AR5413 0xa4
-#define AR5K_SREV_VER_AR5414 0xa5
-#define AR5K_SREV_VER_AR5416 0xc0 /* PCI-E */
-#define AR5K_SREV_VER_AR5418 0xca /* PCI-E */
-#define AR5K_SREV_VER_AR2425 0xe2 /* PCI-E */
+#define AR5K_SREV_AR5210 0x00 /* Crete */
+#define AR5K_SREV_AR5311 0x10 /* Maui 1 */
+#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */
+#define AR5K_SREV_AR5311B 0x30 /* Spirit */
+#define AR5K_SREV_AR5211 0x40 /* Oahu */
+#define AR5K_SREV_AR5212 0x50 /* Venice */
+#define AR5K_SREV_AR5213 0x55 /* ??? */
+#define AR5K_SREV_AR5213A 0x59 /* Hainan */
+#define AR5K_SREV_AR2413 0x78 /* Griffin lite */
+#define AR5K_SREV_AR2414 0x70 /* Griffin */
+#define AR5K_SREV_AR5424 0x90 /* Condor */
+#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */
+#define AR5K_SREV_AR5414 0xa0 /* Eagle */
+#define AR5K_SREV_AR2415 0xb0 /* Cobra */
+#define AR5K_SREV_AR5416 0xc0 /* PCI-E */
+#define AR5K_SREV_AR5418 0xca /* PCI-E */
+#define AR5K_SREV_AR2425 0xe0 /* Swan */
+#define AR5K_SREV_AR2417 0xf0 /* Nala */
#define AR5K_SREV_RAD_5110 0x00
#define AR5K_SREV_RAD_5111 0x10
@@ -190,13 +332,22 @@ struct ath5k_srev_name {
#define AR5K_SREV_RAD_2112 0x40
#define AR5K_SREV_RAD_2112A 0x45
#define AR5K_SREV_RAD_2112B 0x46
-#define AR5K_SREV_RAD_SC0 0x50 /* Found on 2413/2414 */
-#define AR5K_SREV_RAD_SC1 0x60 /* Found on 5413/5414 */
-#define AR5K_SREV_RAD_SC2 0xa0 /* Found on 2424-5/5424 */
-#define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */
+#define AR5K_SREV_RAD_2413 0x50
+#define AR5K_SREV_RAD_5413 0x60
+#define AR5K_SREV_RAD_2316 0x70
+#define AR5K_SREV_RAD_2317 0x80
+#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */
+#define AR5K_SREV_RAD_2425 0xa2
+#define AR5K_SREV_RAD_5133 0xc0
+
+#define AR5K_SREV_PHY_5211 0x30
+#define AR5K_SREV_PHY_5212 0x41
+#define AR5K_SREV_PHY_2112B 0x43
+#define AR5K_SREV_PHY_2413 0x45
+#define AR5K_SREV_PHY_5413 0x61
+#define AR5K_SREV_PHY_2425 0x70
/* IEEE defs */
-
#define IEEE80211_MAX_LEN 2500
/* TODO add support to mac80211 for vendor-specific rates and modes */
@@ -268,27 +419,21 @@ enum ath5k_driver_mode {
AR5K_MODE_MAX = 5
};
-/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
-#define AR5K_SET_SHORT_PREAMBLE 0x04
-
-#define HAS_SHPREAMBLE(_ix) \
- (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE)
-#define SHPREAMBLE_FLAG(_ix) \
- (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0)
-
/****************\
TX DEFINITIONS
\****************/
/*
- * TX Status
+ * TX Status descriptor
*/
struct ath5k_tx_status {
u16 ts_seqnum;
u16 ts_tstamp;
u8 ts_status;
- u8 ts_rate;
+ u8 ts_rate[4];
+ u8 ts_retry[4];
+ u8 ts_final_idx;
s8 ts_rssi;
u8 ts_shortretry;
u8 ts_longretry;
@@ -354,7 +499,6 @@ enum ath5k_tx_queue_id {
AR5K_TX_QUEUE_ID_XR_DATA = 9,
};
-
/*
* Flags to set hw queue's parameters...
*/
@@ -387,7 +531,8 @@ struct ath5k_txq_info {
/*
* Transmit packet types.
- * These are not fully used inside OpenHAL yet
+ * used on tx control descriptor
+ * TODO: Use them inside base.c corectly
*/
enum ath5k_pkt_type {
AR5K_PKT_TYPE_NORMAL = 0,
@@ -430,7 +575,7 @@ enum ath5k_dmasize {
\****************/
/*
- * RX Status
+ * RX Status descriptor
*/
struct ath5k_rx_status {
u16 rs_datalen;
@@ -494,34 +639,59 @@ struct ath5k_beacon_state {
#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
+/*******************************\
+ GAIN OPTIMIZATION DEFINITIONS
+\*******************************/
+
+enum ath5k_rfgain {
+ AR5K_RFGAIN_INACTIVE = 0,
+ AR5K_RFGAIN_READ_REQUESTED,
+ AR5K_RFGAIN_NEED_CHANGE,
+};
+
+#define AR5K_GAIN_CRN_FIX_BITS_5111 4
+#define AR5K_GAIN_CRN_FIX_BITS_5112 7
+#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112
+#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15
+#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20
+#define AR5K_GAIN_CCK_PROBE_CORR 5
+#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15
+#define AR5K_GAIN_STEP_COUNT 10
+#define AR5K_GAIN_PARAM_TX_CLIP 0
+#define AR5K_GAIN_PARAM_PD_90 1
+#define AR5K_GAIN_PARAM_PD_84 2
+#define AR5K_GAIN_PARAM_GAIN_SEL 3
+#define AR5K_GAIN_PARAM_MIX_ORN 0
+#define AR5K_GAIN_PARAM_PD_138 1
+#define AR5K_GAIN_PARAM_PD_137 2
+#define AR5K_GAIN_PARAM_PD_136 3
+#define AR5K_GAIN_PARAM_PD_132 4
+#define AR5K_GAIN_PARAM_PD_131 5
+#define AR5K_GAIN_PARAM_PD_130 6
+#define AR5K_GAIN_CHECK_ADJUST(_g) \
+ ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
+
+struct ath5k_gain_opt_step {
+ s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
+ s32 gos_gain;
+};
+
+struct ath5k_gain {
+ u32 g_step_idx;
+ u32 g_current;
+ u32 g_target;
+ u32 g_low;
+ u32 g_high;
+ u32 g_f_corr;
+ u32 g_active;
+ const struct ath5k_gain_opt_step *g_step;
+};
+
+
/********************\
COMMON DEFINITIONS
\********************/
-/*
- * Atheros hardware descriptor
- * This is read and written to by the hardware
- */
-struct ath5k_desc {
- u32 ds_link; /* physical address of the next descriptor */
- u32 ds_data; /* physical address of data buffer (skb) */
-
- union {
- struct ath5k_hw_5210_tx_desc ds_tx5210;
- struct ath5k_hw_5212_tx_desc ds_tx5212;
- struct ath5k_hw_all_rx_desc ds_rx;
- } ud;
-} __packed;
-
-#define AR5K_RXDESC_INTREQ 0x0020
-
-#define AR5K_TXDESC_CLRDMASK 0x0001
-#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/
-#define AR5K_TXDESC_RTSENA 0x0004
-#define AR5K_TXDESC_CTSENA 0x0008
-#define AR5K_TXDESC_INTREQ 0x0010
-#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/
-
#define AR5K_SLOT_TIME_9 396
#define AR5K_SLOT_TIME_20 880
#define AR5K_SLOT_TIME_MAX 0xffff
@@ -553,167 +723,79 @@ struct ath5k_desc {
#define CHANNEL_MODES CHANNEL_ALL
/*
- * Used internaly in OpenHAL (ar5211.c/ar5212.c
- * for reset_tx_queue). Also see struct struct ieee80211_channel.
+ * Used internaly for reset_tx_queue).
+ * Also see struct struct ieee80211_channel.
*/
#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0)
#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0)
/*
- * The following structure will be used to map 2GHz channels to
+ * The following structure is used to map 2GHz channels to
* 5GHz Atheros channels.
+ * TODO: Clean up
*/
struct ath5k_athchan_2ghz {
u32 a2_flags;
u16 a2_athchan;
};
-/*
- * Rate definitions
- * TODO: Clean them up or move them on mac80211 -most of these infos are
- * used by the rate control algorytm on MadWiFi.
- */
-/* Max number of rates on the rate table and what it seems
- * Atheros hardware supports */
-#define AR5K_MAX_RATES 32
+/******************\
+ RATE DEFINITIONS
+\******************/
/**
- * struct ath5k_rate - rate structure
- * @valid: is this a valid rate for rate control (remove)
- * @modulation: respective mac80211 modulation
- * @rate_kbps: rate in kbit/s
- * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on
- * &struct ath5k_rx_status.rs_rate and on TX on
- * &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports
- * up to 32 rates, indexed by 1-32. This means we really only need
- * 6 bits for the rate_code.
- * @dot11_rate: respective IEEE-802.11 rate value
- * @control_rate: index of rate assumed to be used to send control frames.
- * This can be used to set override the value on the rate duration
- * registers. This is only useful if we can override in the harware at
- * what rate we want to send control frames at. Note that IEEE-802.11
- * Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we
- * should send ACK/CTS, if we change this value we can be breaking
- * the spec.
+ * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
*
- * This structure is used to get the RX rate or set the TX rate on the
+ * The rate code is used to get the RX rate or set the TX rate on the
* hardware descriptors. It is also used for internal modulation control
* and settings.
*
- * On RX after the &struct ath5k_desc is parsed by the appropriate
- * ah_proc_rx_desc() the respective hardware rate value is set in
- * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in
- * &struct ath5k_tx_status.ts_rate which is later used to setup the
- * &struct ath5k_desc correctly. This is the hardware rate map we are
- * aware of:
+ * This is the hardware rate map we are aware of:
*
- * rate_code 1 2 3 4 5 6 7 8
+ * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08
* rate_kbps 3000 1000 ? ? ? 2000 500 48000
*
- * rate_code 9 10 11 12 13 14 15 16
+ * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10
* rate_kbps 24000 12000 6000 54000 36000 18000 9000 ?
*
* rate_code 17 18 19 20 21 22 23 24
* rate_kbps ? ? ? ? ? ? ? 11000
*
* rate_code 25 26 27 28 29 30 31 32
- * rate_kbps 5500 2000 1000 ? ? ? ? ?
+ * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ?
*
+ * "S" indicates CCK rates with short preamble.
+ *
+ * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
+ * lowest 4 bits, so they are the same as below with a 0xF mask.
+ * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
+ * We handle this in ath5k_setup_bands().
*/
-struct ath5k_rate {
- u8 valid;
- u32 modulation;
- u16 rate_kbps;
- u8 rate_code;
- u8 dot11_rate;
- u8 control_rate;
-};
-
-/* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */
-struct ath5k_rate_table {
- u16 rate_count;
- u8 rate_code_to_index[AR5K_MAX_RATES]; /* Back-mapping */
- struct ath5k_rate rates[AR5K_MAX_RATES];
-};
-
-/*
- * Rate tables...
- * TODO: CLEAN THIS !!!
- */
-#define AR5K_RATES_11A { 8, { \
- 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \
- 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \
- 255, 255, 255, 255, 255, 255, 255, 255 }, { \
- { 1, 0, 6000, 11, 140, 0 }, \
- { 1, 0, 9000, 15, 18, 0 }, \
- { 1, 0, 12000, 10, 152, 2 }, \
- { 1, 0, 18000, 14, 36, 2 }, \
- { 1, 0, 24000, 9, 176, 4 }, \
- { 1, 0, 36000, 13, 72, 4 }, \
- { 1, 0, 48000, 8, 96, 4 }, \
- { 1, 0, 54000, 12, 108, 4 } } \
-}
-
-#define AR5K_RATES_11B { 4, { \
- 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \
- 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \
- 3, 2, 1, 0, 255, 255, 255, 255 }, { \
- { 1, 0, 1000, 27, 130, 0 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } } \
-}
-
-#define AR5K_RATES_11G { 12, { \
- 255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \
- 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \
- 3, 2, 1, 0, 255, 255, 255, 255 }, { \
- { 1, 0, 1000, 27, 2, 0 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 }, \
- { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \
- { 0, 0, 6000, 11, 12, 4 }, \
- { 0, 0, 9000, 15, 18, 4 }, \
- { 1, 0, 12000, 10, 24, 6 }, \
- { 1, 0, 18000, 14, 36, 6 }, \
- { 1, 0, 24000, 9, 48, 8 }, \
- { 1, 0, 36000, 13, 72, 8 }, \
- { 1, 0, 48000, 8, 96, 8 }, \
- { 1, 0, 54000, 12, 108, 8 } } \
-}
-
-#define AR5K_RATES_TURBO { 8, { \
- 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \
- 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \
- 255, 255, 255, 255, 255, 255, 255, 255 }, { \
- { 1, MODULATION_TURBO, 6000, 11, 140, 0 }, \
- { 1, MODULATION_TURBO, 9000, 15, 18, 0 }, \
- { 1, MODULATION_TURBO, 12000, 10, 152, 2 }, \
- { 1, MODULATION_TURBO, 18000, 14, 36, 2 }, \
- { 1, MODULATION_TURBO, 24000, 9, 176, 4 }, \
- { 1, MODULATION_TURBO, 36000, 13, 72, 4 }, \
- { 1, MODULATION_TURBO, 48000, 8, 96, 4 }, \
- { 1, MODULATION_TURBO, 54000, 12, 108, 4 } } \
-}
+#define AR5K_MAX_RATES 32
-#define AR5K_RATES_XR { 12, { \
- 255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4, \
- 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \
- 255, 255, 255, 255, 255, 255, 255, 255 }, { \
- { 1, MODULATION_XR, 500, 7, 129, 0 }, \
- { 1, MODULATION_XR, 1000, 2, 139, 1 }, \
- { 1, MODULATION_XR, 2000, 6, 150, 2 }, \
- { 1, MODULATION_XR, 3000, 1, 150, 3 }, \
- { 1, 0, 6000, 11, 140, 4 }, \
- { 1, 0, 9000, 15, 18, 4 }, \
- { 1, 0, 12000, 10, 152, 6 }, \
- { 1, 0, 18000, 14, 36, 6 }, \
- { 1, 0, 24000, 9, 176, 8 }, \
- { 1, 0, 36000, 13, 72, 8 }, \
- { 1, 0, 48000, 8, 96, 8 }, \
- { 1, 0, 54000, 12, 108, 8 } } \
-}
+/* B */
+#define ATH5K_RATE_CODE_1M 0x1B
+#define ATH5K_RATE_CODE_2M 0x1A
+#define ATH5K_RATE_CODE_5_5M 0x19
+#define ATH5K_RATE_CODE_11M 0x18
+/* A and G */
+#define ATH5K_RATE_CODE_6M 0x0B
+#define ATH5K_RATE_CODE_9M 0x0F
+#define ATH5K_RATE_CODE_12M 0x0A
+#define ATH5K_RATE_CODE_18M 0x0E
+#define ATH5K_RATE_CODE_24M 0x09
+#define ATH5K_RATE_CODE_36M 0x0D
+#define ATH5K_RATE_CODE_48M 0x08
+#define ATH5K_RATE_CODE_54M 0x0C
+/* XR */
+#define ATH5K_RATE_CODE_XR_500K 0x07
+#define ATH5K_RATE_CODE_XR_1M 0x02
+#define ATH5K_RATE_CODE_XR_2M 0x06
+#define ATH5K_RATE_CODE_XR_3M 0x01
+
+/* adding this flag to rate_code enables short preamble */
+#define AR5K_SET_SHORT_PREAMBLE 0x04
/*
* Crypto definitions
@@ -735,7 +817,6 @@ struct ath5k_rate_table {
return (false); \
} while (0)
-
enum ath5k_ant_setting {
AR5K_ANT_VARIABLE = 0, /* variable by programming */
AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */
@@ -846,7 +927,8 @@ enum ath5k_power_mode {
/*
* These match net80211 definitions (not used in
- * d80211).
+ * mac80211).
+ * TODO: Clean this up
*/
#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/
#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/
@@ -862,7 +944,8 @@ enum ath5k_power_mode {
/*
* Chipset capabilities -see ath5k_hw_get_capability-
* get_capability function is not yet fully implemented
- * in OpenHAL so most of these don't work yet...
+ * in ath5k so most of these don't work yet...
+ * TODO: Implement these & merge with _TUNE_ stuff above
*/
enum ath5k_capability_type {
AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */
@@ -931,6 +1014,7 @@ struct ath5k_capabilities {
#define AR5K_MAX_GPIO 10
#define AR5K_MAX_RF_BANKS 8
+/* TODO: Clean up and merge with ath5k_softc */
struct ath5k_hw {
u32 ah_magic;
@@ -939,7 +1023,7 @@ struct ath5k_hw {
enum ath5k_int ah_imr;
- enum ieee80211_if_types ah_op_mode;
+ enum nl80211_iftype ah_op_mode;
enum ath5k_power_mode ah_power_mode;
struct ieee80211_channel ah_current_channel;
bool ah_turbo;
@@ -1023,11 +1107,13 @@ struct ath5k_hw {
/*
* Function pointers
*/
+ int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ u32 size, unsigned int flags);
int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
unsigned int, unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int, unsigned int);
- int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
unsigned int, unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int);
int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
@@ -1040,33 +1126,38 @@ struct ath5k_hw {
* Prototypes
*/
-/* General Functions */
-extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set);
/* Attach/Detach Functions */
extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
-extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode);
extern void ath5k_hw_detach(struct ath5k_hw *ah);
+
/* Reset Functions */
-extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel);
+extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
+extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel);
/* Power management functions */
extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
+
/* DMA Related Functions */
-extern void ath5k_hw_start_rx(struct ath5k_hw *ah);
+extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
-extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah);
-extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr);
-extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue);
+extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
+extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
+extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
-extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue);
-extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr);
+extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
+ u32 phys_addr);
extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
/* Interrupt handling */
extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
-extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask);
+extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum
+ath5k_int new_mask);
extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats);
+
/* EEPROM access functions */
-extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain);
+extern int ath5k_eeprom_init(struct ath5k_hw *ah);
+extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
+
/* Protocol Control Unit Functions */
extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
/* BSSID Functions */
@@ -1076,14 +1167,14 @@ extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc
extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
/* Receive start/stop functions */
extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
-extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah);
+extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
/* RX Filter functions */
extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
-extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index);
+extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
-/* Beacon related functions */
+/* Beacon control functions */
extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
@@ -1105,61 +1196,129 @@ extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
+
/* Queue Control Unit, DFS Control Unit Functions */
-extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info);
-extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info);
extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+ const struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
+ enum ath5k_tx_queue queue_type,
+ struct ath5k_txq_info *queue_info);
+extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
-extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
-extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
+extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
+
/* Hardware Descriptor Functions */
-extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags);
+extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
+
/* GPIO Functions */
extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
-extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
+extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
+
/* Misc functions */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
-
+extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
+extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
/* Initial register settings functions */
extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
+
/* Initialize RF */
extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
-
-
/* PHY/RF channel functions */
extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
/* PHY calibration */
extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
-extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
/* Misc PHY functions */
extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
-extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
/* TX power setup */
extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
+/*
+ * Functions used internaly
+ */
+/*
+ * Translate usec to hw clock units
+ */
+static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
+{
+ return turbo ? (usec * 80) : (usec * 40);
+}
+
+/*
+ * Translate hw clock units to usec
+ */
+static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
+{
+ return turbo ? (clock / 80) : (clock / 40);
+}
+
+/*
+ * Read from a register
+ */
static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
{
return ioread32(ah->ah_iobase + reg);
}
+/*
+ * Write to a register
+ */
static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
{
iowrite32(val, ah->ah_iobase + reg);
}
+#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY)
+/*
+ * Check if a register write has been completed
+ */
+static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag,
+ u32 val, bool is_set)
+{
+ int i;
+ u32 data;
+
+ for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
+ data = ath5k_hw_reg_read(ah, reg);
+ if (is_set && (data & flag))
+ break;
+ else if ((data & flag) == val)
+ break;
+ udelay(15);
+ }
+
+ return (i <= 0) ? -EAGAIN : 0;
+}
+#endif
+
+static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
+{
+ u32 retval = 0, bit, i;
+
+ for (i = 0; i < bits; i++) {
+ bit = (val >> i) & 1;
+ retval = (retval << 1) | bit;
+ }
+
+ return retval;
+}
+
#endif
diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c
new file mode 100644
index 000000000000..51d569883cdd
--- /dev/null
+++ b/drivers/net/wireless/ath5k/attach.c
@@ -0,0 +1,359 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* Attach/Detach Functions and helpers *
+\*************************************/
+
+#include <linux/pci.h>
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/**
+ * ath5k_hw_post - Power On Self Test helper function
+ *
+ * @ah: The &struct ath5k_hw
+ */
+static int ath5k_hw_post(struct ath5k_hw *ah)
+{
+
+ int i, c;
+ u16 cur_reg;
+ u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)};
+ u32 var_pattern;
+ u32 static_pattern[4] = {
+ 0x55555555, 0xaaaaaaaa,
+ 0x66666666, 0x99999999
+ };
+ u32 init_val;
+ u32 cur_val;
+
+ for (c = 0; c < 2; c++) {
+
+ cur_reg = regs[c];
+
+ /* Save previous value */
+ init_val = ath5k_hw_reg_read(ah, cur_reg);
+
+ for (i = 0; i < 256; i++) {
+ var_pattern = i << 16 | i;
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ cur_val = ath5k_hw_reg_read(ah, cur_reg);
+
+ if (cur_val != var_pattern) {
+ ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
+ return -EAGAIN;
+ }
+
+ /* Found on ndiswrapper dumps */
+ var_pattern = 0x0039080f;
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ }
+
+ for (i = 0; i < 4; i++) {
+ var_pattern = static_pattern[i];
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ cur_val = ath5k_hw_reg_read(ah, cur_reg);
+
+ if (cur_val != var_pattern) {
+ ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
+ return -EAGAIN;
+ }
+
+ /* Found on ndiswrapper dumps */
+ var_pattern = 0x003b080f;
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ }
+
+ /* Restore previous value */
+ ath5k_hw_reg_write(ah, init_val, cur_reg);
+
+ }
+
+ return 0;
+
+}
+
+/**
+ * ath5k_hw_attach - Check if hw is supported and init the needed structs
+ *
+ * @sc: The &struct ath5k_softc we got from the driver's attach function
+ * @mac_version: The mac version id (check out ath5k.h) based on pci id
+ *
+ * Check if the device is supported, perform a POST and initialize the needed
+ * structs. Returns -ENOMEM if we don't have memory for the needed structs,
+ * -ENODEV if the device is not supported or prints an error msg if something
+ * else went wrong.
+ */
+struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
+{
+ struct ath5k_hw *ah;
+ struct pci_dev *pdev = sc->pdev;
+ u8 mac[ETH_ALEN];
+ int ret;
+ u32 srev;
+
+ /*If we passed the test malloc a ath5k_hw struct*/
+ ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
+ if (ah == NULL) {
+ ret = -ENOMEM;
+ ATH5K_ERR(sc, "out of memory\n");
+ goto err;
+ }
+
+ ah->ah_sc = sc;
+ ah->ah_iobase = sc->iobase;
+
+ /*
+ * HW information
+ */
+ ah->ah_op_mode = NL80211_IFTYPE_STATION;
+ ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT;
+ ah->ah_turbo = false;
+ ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+ ah->ah_imr = 0;
+ ah->ah_atim_window = 0;
+ ah->ah_aifs = AR5K_TUNE_AIFS;
+ ah->ah_cw_min = AR5K_TUNE_CWMIN;
+ ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
+ ah->ah_software_retry = false;
+ ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
+
+ /*
+ * Set the mac version based on the pci id
+ */
+ ah->ah_version = mac_version;
+
+ /*Fill the ath5k_hw struct with the needed functions*/
+ ret = ath5k_hw_init_desc_functions(ah);
+ if (ret)
+ goto err_free;
+
+ /* Bring device out of sleep and reset it's units */
+ ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true);
+ if (ret)
+ goto err_free;
+
+ /* Get MAC, PHY and RADIO revisions */
+ srev = ath5k_hw_reg_read(ah, AR5K_SREV);
+ ah->ah_mac_srev = srev;
+ ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
+ ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
+ ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) &
+ 0xffffffff;
+ ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_5GHZ);
+ ah->ah_phy = AR5K_PHY(0);
+
+ /* Try to identify radio chip based on it's srev */
+ switch (ah->ah_radio_5ghz_revision & 0xf0) {
+ case AR5K_SREV_RAD_5111:
+ ah->ah_radio = AR5K_RF5111;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_2GHZ);
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
+ break;
+ case AR5K_SREV_RAD_5112:
+ case AR5K_SREV_RAD_2112:
+ ah->ah_radio = AR5K_RF5112;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_2GHZ);
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
+ break;
+ case AR5K_SREV_RAD_2413:
+ ah->ah_radio = AR5K_RF2413;
+ ah->ah_single_chip = true;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
+ break;
+ case AR5K_SREV_RAD_5413:
+ ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
+ break;
+ case AR5K_SREV_RAD_2316:
+ ah->ah_radio = AR5K_RF2316;
+ ah->ah_single_chip = true;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316;
+ break;
+ case AR5K_SREV_RAD_2317:
+ ah->ah_radio = AR5K_RF2317;
+ ah->ah_single_chip = true;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2317;
+ break;
+ case AR5K_SREV_RAD_5424:
+ if (ah->ah_mac_version == AR5K_SREV_AR2425 ||
+ ah->ah_mac_version == AR5K_SREV_AR2417){
+ ah->ah_radio = AR5K_RF2425;
+ ah->ah_single_chip = true;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
+ } else {
+ ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
+ }
+ break;
+ default:
+ /* Identify radio based on mac/phy srev */
+ if (ah->ah_version == AR5K_AR5210) {
+ ah->ah_radio = AR5K_RF5110;
+ ah->ah_single_chip = false;
+ } else if (ah->ah_version == AR5K_AR5211) {
+ ah->ah_radio = AR5K_RF5111;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_2GHZ);
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) ||
+ ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_2425) {
+ ah->ah_radio = AR5K_RF2425;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
+ } else if (srev == AR5K_SREV_AR5213A &&
+ ah->ah_phy_revision == AR5K_SREV_PHY_2112B) {
+ ah->ah_radio = AR5K_RF5112;
+ ah->ah_single_chip = false;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2112B;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4)) {
+ ah->ah_radio = AR5K_RF2316;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_5413) {
+ ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_2413) {
+ ah->ah_radio = AR5K_RF2413;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
+ } else {
+ ATH5K_ERR(sc, "Couldn't identify radio revision.\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
+ }
+
+
+ /* Return on unsuported chips (unsupported eeprom etc) */
+ if ((srev >= AR5K_SREV_AR5416) &&
+ (srev < AR5K_SREV_AR2425)) {
+ ATH5K_ERR(sc, "Device not yet supported.\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ /*
+ * Write PCI-E power save settings
+ */
+ if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
+ ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
+ /* Shut off RX when elecidle is asserted */
+ ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES);
+ /* TODO: EEPROM work */
+ ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES);
+ /* Shut off PLL and CLKREQ active in L1 */
+ ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES);
+ /* Preserce other settings */
+ ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES);
+ /* Reset SERDES to load new settings */
+ ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET);
+ mdelay(1);
+ }
+
+ /*
+ * POST
+ */
+ ret = ath5k_hw_post(ah);
+ if (ret)
+ goto err_free;
+
+ /* Enable pci core retry fix on Hainan (5213A) and later chips */
+ if (srev >= AR5K_SREV_AR5213A)
+ ath5k_hw_reg_write(ah, AR5K_PCICFG_RETRY_FIX, AR5K_PCICFG);
+
+ /*
+ * Get card capabilities, calibration values etc
+ * TODO: EEPROM work
+ */
+ ret = ath5k_eeprom_init(ah);
+ if (ret) {
+ ATH5K_ERR(sc, "unable to init EEPROM\n");
+ goto err_free;
+ }
+
+ /* Get misc capabilities */
+ ret = ath5k_hw_set_capabilities(ah);
+ if (ret) {
+ ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
+ sc->pdev->device);
+ goto err_free;
+ }
+
+ /* Set MAC address */
+ ret = ath5k_eeprom_read_mac(ah, mac);
+ if (ret) {
+ ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
+ sc->pdev->device);
+ goto err_free;
+ }
+
+ ath5k_hw_set_lladdr(ah, mac);
+ /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
+ memset(ah->ah_bssid, 0xff, ETH_ALEN);
+ ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+ ath5k_hw_set_opmode(ah);
+
+ ath5k_hw_set_rfgain_opt(ah);
+
+ return ah;
+err_free:
+ kfree(ah);
+err:
+ return ERR_PTR(ret);
+}
+
+/**
+ * ath5k_hw_detach - Free the ath5k_hw struct
+ *
+ * @ah: The &struct ath5k_hw
+ */
+void ath5k_hw_detach(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ __set_bit(ATH_STAT_INVALID, ah->ah_sc->status);
+
+ if (ah->ah_rf_banks != NULL)
+ kfree(ah->ah_rf_banks);
+
+ /* assume interrupts are down */
+ kfree(ah);
+}
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 0676c6d84383..9b95c4049b31 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -72,7 +72,7 @@ MODULE_AUTHOR("Nick Kossifidis");
MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_VERSION("0.5.0 (EXPERIMENTAL)");
+MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
/* Known PCI ids */
@@ -93,45 +93,94 @@ static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
{ PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
{ PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
{ PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
- { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* 5424 Condor (PCI-E)*/
+ { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */
+ { PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */
{ 0 }
};
MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
/* Known SREVs */
static struct ath5k_srev_name srev_names[] = {
- { "5210", AR5K_VERSION_VER, AR5K_SREV_VER_AR5210 },
- { "5311", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311 },
- { "5311A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311A },
- { "5311B", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311B },
- { "5211", AR5K_VERSION_VER, AR5K_SREV_VER_AR5211 },
- { "5212", AR5K_VERSION_VER, AR5K_SREV_VER_AR5212 },
- { "5213", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213 },
- { "5213A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213A },
- { "2413", AR5K_VERSION_VER, AR5K_SREV_VER_AR2413 },
- { "2414", AR5K_VERSION_VER, AR5K_SREV_VER_AR2414 },
- { "2424", AR5K_VERSION_VER, AR5K_SREV_VER_AR2424 },
- { "5424", AR5K_VERSION_VER, AR5K_SREV_VER_AR5424 },
- { "5413", AR5K_VERSION_VER, AR5K_SREV_VER_AR5413 },
- { "5414", AR5K_VERSION_VER, AR5K_SREV_VER_AR5414 },
- { "5416", AR5K_VERSION_VER, AR5K_SREV_VER_AR5416 },
- { "5418", AR5K_VERSION_VER, AR5K_SREV_VER_AR5418 },
- { "2425", AR5K_VERSION_VER, AR5K_SREV_VER_AR2425 },
- { "xxxxx", AR5K_VERSION_VER, AR5K_SREV_UNKNOWN },
+ { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
+ { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
+ { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
+ { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B },
+ { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 },
+ { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 },
+ { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 },
+ { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A },
+ { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 },
+ { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 },
+ { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 },
+ { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 },
+ { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 },
+ { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 },
+ { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 },
+ { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
+ { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
+ { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
+ { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
{ "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
{ "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
+ { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A },
{ "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 },
{ "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 },
{ "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A },
+ { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B },
{ "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 },
{ "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A },
- { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC0 },
- { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC1 },
- { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC2 },
+ { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B },
+ { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 },
+ { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
+ { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
+ { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
+ { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
{ "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
{ "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
};
+static struct ieee80211_rate ath5k_rates[] = {
+ { .bitrate = 10,
+ .hw_value = ATH5K_RATE_CODE_1M, },
+ { .bitrate = 20,
+ .hw_value = ATH5K_RATE_CODE_2M,
+ .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = ATH5K_RATE_CODE_5_5M,
+ .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = ATH5K_RATE_CODE_11M,
+ .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = ATH5K_RATE_CODE_6M,
+ .flags = 0 },
+ { .bitrate = 90,
+ .hw_value = ATH5K_RATE_CODE_9M,
+ .flags = 0 },
+ { .bitrate = 120,
+ .hw_value = ATH5K_RATE_CODE_12M,
+ .flags = 0 },
+ { .bitrate = 180,
+ .hw_value = ATH5K_RATE_CODE_18M,
+ .flags = 0 },
+ { .bitrate = 240,
+ .hw_value = ATH5K_RATE_CODE_24M,
+ .flags = 0 },
+ { .bitrate = 360,
+ .hw_value = ATH5K_RATE_CODE_36M,
+ .flags = 0 },
+ { .bitrate = 480,
+ .hw_value = ATH5K_RATE_CODE_48M,
+ .flags = 0 },
+ { .bitrate = 540,
+ .hw_value = ATH5K_RATE_CODE_54M,
+ .flags = 0 },
+ /* XR missing */
+};
+
/*
* Prototypes - PCI stack related functions
*/
@@ -162,7 +211,8 @@ static struct pci_driver ath5k_pci_driver = {
* Prototypes - MAC 802.11 stack related functions
*/
static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-static int ath5k_reset(struct ieee80211_hw *hw);
+static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
+static int ath5k_reset_wake(struct ath5k_softc *sc);
static int ath5k_start(struct ieee80211_hw *hw);
static void ath5k_stop(struct ieee80211_hw *hw);
static int ath5k_add_interface(struct ieee80211_hw *hw,
@@ -218,20 +268,16 @@ static void ath5k_detach(struct pci_dev *pdev,
struct ieee80211_hw *hw);
/* Channel/mode setup */
static inline short ath5k_ieee2mhz(short chan);
-static unsigned int ath5k_copy_rates(struct ieee80211_rate *rates,
- const struct ath5k_rate_table *rt,
- unsigned int max);
static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
struct ieee80211_channel *channels,
unsigned int mode,
unsigned int max);
-static int ath5k_getchannels(struct ieee80211_hw *hw);
+static int ath5k_setup_bands(struct ieee80211_hw *hw);
static int ath5k_chan_set(struct ath5k_softc *sc,
struct ieee80211_channel *chan);
static void ath5k_setcurmode(struct ath5k_softc *sc,
unsigned int mode);
static void ath5k_mode_setup(struct ath5k_softc *sc);
-static void ath5k_set_total_hw_rates(struct ath5k_softc *sc);
/* Descriptor setup */
static int ath5k_desc_alloc(struct ath5k_softc *sc,
@@ -351,7 +397,11 @@ ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
if (srev_names[i].sr_type != type)
continue;
- if ((val & 0xff) < srev_names[i + 1].sr_val) {
+
+ if ((val & 0xf0) == srev_names[i].sr_val)
+ name = srev_names[i].sr_name;
+
+ if ((val & 0xff) == srev_names[i].sr_val) {
name = srev_names[i].sr_name;
break;
}
@@ -446,6 +496,12 @@ ath5k_pci_probe(struct pci_dev *pdev,
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
+
hw->extra_tx_headroom = 2;
hw->channel_change_time = 5000;
sc = hw->priv;
@@ -462,7 +518,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
sc->iobase = mem; /* So we can unmap it on detach */
sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
- sc->opmode = IEEE80211_IF_TYPE_STA;
+ sc->opmode = NL80211_IFTYPE_STATION;
mutex_init(&sc->lock);
spin_lock_init(&sc->rxbuflock);
spin_lock_init(&sc->txbuflock);
@@ -485,13 +541,19 @@ ath5k_pci_probe(struct pci_dev *pdev,
goto err_irq;
}
+ /* set up multi-rate retry capabilities */
+ if (sc->ah->ah_version == AR5K_AR5212) {
+ hw->max_altrates = 3;
+ hw->max_altrate_tries = 11;
+ }
+
/* Finish private driver data initialization */
ret = ath5k_attach(pdev, hw);
if (ret)
goto err_ah;
ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
+ ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
sc->ah->ah_mac_srev,
sc->ah->ah_phy_revision);
@@ -646,7 +708,6 @@ err_no_irq:
#endif /* CONFIG_PM */
-
/***********************\
* Driver Initialization *
\***********************/
@@ -669,7 +730,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
* return false w/o doing anything. MAC's that do
* support it will return true w/o doing anything.
*/
- ret = ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
+ ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
if (ret < 0)
goto err;
if (ret > 0)
@@ -688,15 +749,12 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
* on settings like the phy mode and regulatory
* domain restrictions.
*/
- ret = ath5k_getchannels(hw);
+ ret = ath5k_setup_bands(hw);
if (ret) {
ATH5K_ERR(sc, "can't get channels\n");
goto err;
}
- /* Set *_rates so we can map hw rate index */
- ath5k_set_total_hw_rates(sc);
-
/* NB: setup here so ath5k_rate_update is happy */
if (test_bit(AR5K_MODE_11A, ah->ah_modes))
ath5k_setcurmode(sc, AR5K_MODE_11A);
@@ -813,27 +871,6 @@ ath5k_ieee2mhz(short chan)
}
static unsigned int
-ath5k_copy_rates(struct ieee80211_rate *rates,
- const struct ath5k_rate_table *rt,
- unsigned int max)
-{
- unsigned int i, count;
-
- if (rt == NULL)
- return 0;
-
- for (i = 0, count = 0; i < rt->rate_count && max > 0; i++) {
- rates[count].bitrate = rt->rates[i].rate_kbps / 100;
- rates[count].hw_value = rt->rates[i].rate_code;
- rates[count].flags = rt->rates[i].modulation;
- count++;
- max--;
- }
-
- return count;
-}
-
-static unsigned int
ath5k_copy_channels(struct ath5k_hw *ah,
struct ieee80211_channel *channels,
unsigned int mode,
@@ -895,74 +932,97 @@ ath5k_copy_channels(struct ath5k_hw *ah,
return count;
}
+static void
+ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
+{
+ u8 i;
+
+ for (i = 0; i < AR5K_MAX_RATES; i++)
+ sc->rate_idx[b->band][i] = -1;
+
+ for (i = 0; i < b->n_bitrates; i++) {
+ sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
+ if (b->bitrates[i].hw_value_short)
+ sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
+ }
+}
+
static int
-ath5k_getchannels(struct ieee80211_hw *hw)
+ath5k_setup_bands(struct ieee80211_hw *hw)
{
struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
- struct ieee80211_supported_band *sbands = sc->sbands;
- const struct ath5k_rate_table *hw_rates;
- unsigned int max_r, max_c, count_r, count_c;
- int mode2g = AR5K_MODE_11G;
+ struct ieee80211_supported_band *sband;
+ int max_c, count_c = 0;
+ int i;
BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
-
- max_r = ARRAY_SIZE(sc->rates);
max_c = ARRAY_SIZE(sc->channels);
- count_r = count_c = 0;
/* 2GHz band */
- if (!test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
- mode2g = AR5K_MODE_11B;
- if (!test_bit(AR5K_MODE_11B,
- sc->ah->ah_capabilities.cap_mode))
- mode2g = -1;
- }
+ sband = &sc->sbands[IEEE80211_BAND_2GHZ];
+ sband->band = IEEE80211_BAND_2GHZ;
+ sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
- if (mode2g > 0) {
- struct ieee80211_supported_band *sband =
- &sbands[IEEE80211_BAND_2GHZ];
+ if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
+ /* G mode */
+ memcpy(sband->bitrates, &ath5k_rates[0],
+ sizeof(struct ieee80211_rate) * 12);
+ sband->n_bitrates = 12;
- sband->bitrates = sc->rates;
sband->channels = sc->channels;
-
- sband->band = IEEE80211_BAND_2GHZ;
sband->n_channels = ath5k_copy_channels(ah, sband->channels,
- mode2g, max_c);
-
- hw_rates = ath5k_hw_get_rate_table(ah, mode2g);
- sband->n_bitrates = ath5k_copy_rates(sband->bitrates,
- hw_rates, max_r);
+ AR5K_MODE_11G, max_c);
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
count_c = sband->n_channels;
- count_r = sband->n_bitrates;
+ max_c -= count_c;
+ } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
+ /* B mode */
+ memcpy(sband->bitrates, &ath5k_rates[0],
+ sizeof(struct ieee80211_rate) * 4);
+ sband->n_bitrates = 4;
+
+ /* 5211 only supports B rates and uses 4bit rate codes
+ * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
+ * fix them up here:
+ */
+ if (ah->ah_version == AR5K_AR5211) {
+ for (i = 0; i < 4; i++) {
+ sband->bitrates[i].hw_value =
+ sband->bitrates[i].hw_value & 0xF;
+ sband->bitrates[i].hw_value_short =
+ sband->bitrates[i].hw_value_short & 0xF;
+ }
+ }
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+ sband->channels = sc->channels;
+ sband->n_channels = ath5k_copy_channels(ah, sband->channels,
+ AR5K_MODE_11B, max_c);
- max_r -= count_r;
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+ count_c = sband->n_channels;
max_c -= count_c;
-
}
+ ath5k_setup_rate_idx(sc, sband);
- /* 5GHz band */
-
+ /* 5GHz band, A mode */
if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
- struct ieee80211_supported_band *sband =
- &sbands[IEEE80211_BAND_5GHZ];
+ sband = &sc->sbands[IEEE80211_BAND_5GHZ];
+ sband->band = IEEE80211_BAND_5GHZ;
+ sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
- sband->bitrates = &sc->rates[count_r];
- sband->channels = &sc->channels[count_c];
+ memcpy(sband->bitrates, &ath5k_rates[4],
+ sizeof(struct ieee80211_rate) * 8);
+ sband->n_bitrates = 8;
- sband->band = IEEE80211_BAND_5GHZ;
+ sband->channels = &sc->channels[count_c];
sband->n_channels = ath5k_copy_channels(ah, sband->channels,
AR5K_MODE_11A, max_c);
- hw_rates = ath5k_hw_get_rate_table(ah, AR5K_MODE_11A);
- sband->n_bitrates = ath5k_copy_rates(sband->bitrates,
- hw_rates, max_r);
-
hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
}
+ ath5k_setup_rate_idx(sc, sband);
ath5k_debug_dump_bands(sc);
@@ -978,9 +1038,6 @@ ath5k_getchannels(struct ieee80211_hw *hw)
static int
ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
{
- struct ath5k_hw *ah = sc->ah;
- int ret;
-
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n",
sc->curchan->center_freq, chan->center_freq);
@@ -996,41 +1053,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- ath5k_hw_set_intr(ah, 0); /* disable interrupts */
- ath5k_txq_cleanup(sc); /* clear pending tx frames */
- ath5k_rx_stop(sc); /* turn off frame recv */
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
- if (ret) {
- ATH5K_ERR(sc, "%s: unable to reset channel "
- "(%u Mhz)\n", __func__, chan->center_freq);
- return ret;
- }
-
- ath5k_hw_set_txpower_limit(sc->ah, 0);
-
- /*
- * Re-enable rx framework.
- */
- ret = ath5k_rx_start(sc);
- if (ret) {
- ATH5K_ERR(sc, "%s: unable to restart recv logic\n",
- __func__);
- return ret;
- }
-
- /*
- * Change channels and update the h/w rate map
- * if we're switching; e.g. 11a to 11b/g.
- *
- * XXX needed?
- */
-/* ath5k_chan_change(sc, chan); */
-
- ath5k_beacon_config(sc);
- /*
- * Re-enable interrupts.
- */
- ath5k_hw_set_intr(ah, sc->imask);
+ return ath5k_reset(sc, true, true);
}
return 0;
@@ -1068,75 +1091,13 @@ ath5k_mode_setup(struct ath5k_softc *sc)
ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
}
-/*
- * Match the hw provided rate index (through descriptors)
- * to an index for sc->curband->bitrates, so it can be used
- * by the stack.
- *
- * This one is a little bit tricky but i think i'm right
- * about this...
- *
- * We have 4 rate tables in the following order:
- * XR (4 rates)
- * 802.11a (8 rates)
- * 802.11b (4 rates)
- * 802.11g (12 rates)
- * that make the hw rate table.
- *
- * Lets take a 5211 for example that supports a and b modes only.
- * First comes the 802.11a table and then 802.11b (total 12 rates).
- * When hw returns eg. 11 it points to the last 802.11b rate (11Mbit),
- * if it returns 2 it points to the second 802.11a rate etc.
- *
- * Same goes for 5212 who has xr/a/b/g support (total 28 rates).
- * First comes the XR table, then 802.11a, 802.11b and 802.11g.
- * When hw returns eg. 27 it points to the last 802.11g rate (54Mbits) etc
- */
-static void
-ath5k_set_total_hw_rates(struct ath5k_softc *sc) {
-
- struct ath5k_hw *ah = sc->ah;
-
- if (test_bit(AR5K_MODE_11A, ah->ah_modes))
- sc->a_rates = 8;
-
- if (test_bit(AR5K_MODE_11B, ah->ah_modes))
- sc->b_rates = 4;
-
- if (test_bit(AR5K_MODE_11G, ah->ah_modes))
- sc->g_rates = 12;
-
- /* XXX: Need to see what what happens when
- xr disable bits in eeprom are set */
- if (ah->ah_version >= AR5K_AR5212)
- sc->xr_rates = 4;
-
-}
-
static inline int
-ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) {
-
- int mac80211_rix;
-
- if(sc->curband->band == IEEE80211_BAND_2GHZ) {
- /* We setup a g ratetable for both b/g modes */
- mac80211_rix =
- hw_rix - sc->b_rates - sc->a_rates - sc->xr_rates;
- } else {
- mac80211_rix = hw_rix - sc->xr_rates;
- }
-
- /* Something went wrong, fallback to basic rate for this band */
- if ((mac80211_rix >= sc->curband->n_bitrates) ||
- (mac80211_rix <= 0 ))
- mac80211_rix = 1;
-
- return mac80211_rix;
+ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
+{
+ WARN_ON(hw_rix < 0 || hw_rix > AR5K_MAX_RATES);
+ return sc->rate_idx[sc->curband->band][hw_rix];
}
-
-
-
/***************\
* Buffers setup *
\***************/
@@ -1199,7 +1160,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
ds = bf->desc;
ds->ds_link = bf->daddr; /* link to self */
ds->ds_data = bf->skbaddr;
- ath5k_hw_setup_rx_desc(ah, ds,
+ ah->ah_setup_rx_desc(ah, ds,
skb_tailroom(skb), /* buffer size */
0);
@@ -1218,7 +1179,9 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
struct sk_buff *skb = bf->skb;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
- int ret;
+ struct ieee80211_rate *rate;
+ unsigned int mrr_rate[3], mrr_tries[3];
+ int i, ret;
flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
@@ -1233,7 +1196,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
if (info->control.hw_key) {
keyidx = info->control.hw_key->hw_key_idx;
- pktlen += info->control.icv_len;
+ pktlen += info->control.hw_key->icv_len;
}
ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
@@ -1243,6 +1206,22 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
if (ret)
goto err_unmap;
+ memset(mrr_rate, 0, sizeof(mrr_rate));
+ memset(mrr_tries, 0, sizeof(mrr_tries));
+ for (i = 0; i < 3; i++) {
+ rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
+ if (!rate)
+ break;
+
+ mrr_rate[i] = rate->hw_value;
+ mrr_tries[i] = info->control.retries[i].limit;
+ }
+
+ ah->ah_setup_mrr_tx_desc(ah, ds,
+ mrr_rate[0], mrr_tries[0],
+ mrr_rate[1], mrr_tries[1],
+ mrr_rate[2], mrr_tries[2]);
+
ds->ds_link = 0;
ds->ds_data = bf->skbaddr;
@@ -1250,12 +1229,12 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
list_add_tail(&bf->list, &txq->q);
sc->tx_stats[txq->qnum].len++;
if (txq->link == NULL) /* is this first packet? */
- ath5k_hw_put_tx_buf(ah, txq->qnum, bf->daddr);
+ ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
else /* no, so only link it */
*txq->link = bf->daddr;
txq->link = &ds->ds_link;
- ath5k_hw_tx_start(ah, txq->qnum);
+ ath5k_hw_start_tx_dma(ah, txq->qnum);
mmiowb();
spin_unlock_bh(&txq->lock);
@@ -1433,7 +1412,8 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
if (ret)
return ret;
- if (sc->opmode == IEEE80211_IF_TYPE_AP) {
+ if (sc->opmode == NL80211_IFTYPE_AP ||
+ sc->opmode == NL80211_IFTYPE_MESH_POINT) {
/*
* Always burst out beacon and CAB traffic
* (aifs = cwmin = cwmax = 0)
@@ -1441,7 +1421,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
qi.tqi_aifs = 0;
qi.tqi_cw_min = 0;
qi.tqi_cw_max = 0;
- } else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+ } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
/*
* Adhoc mode; backoff between 0 and (2 * cw_min).
*/
@@ -1454,7 +1434,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
"beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
- ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi);
+ ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
if (ret) {
ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
"hardware queue!\n", __func__);
@@ -1503,14 +1483,14 @@ ath5k_txq_cleanup(struct ath5k_softc *sc)
/* don't touch the hardware if marked invalid */
ath5k_hw_stop_tx_dma(ah, sc->bhalq);
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
- ath5k_hw_get_tx_buf(ah, sc->bhalq));
+ ath5k_hw_get_txdp(ah, sc->bhalq));
for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
if (sc->txqs[i].setup) {
ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
"link %p\n",
sc->txqs[i].qnum,
- ath5k_hw_get_tx_buf(ah,
+ ath5k_hw_get_txdp(ah,
sc->txqs[i].qnum),
sc->txqs[i].link);
}
@@ -1570,8 +1550,8 @@ ath5k_rx_start(struct ath5k_softc *sc)
bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
spin_unlock_bh(&sc->rxbuflock);
- ath5k_hw_put_rx_buf(ah, bf->daddr);
- ath5k_hw_start_rx(ah); /* enable recv descriptors */
+ ath5k_hw_set_rxdp(ah, bf->daddr);
+ ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
ath5k_mode_setup(sc); /* set filters, etc. */
ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
@@ -1588,7 +1568,7 @@ ath5k_rx_stop(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
- ath5k_hw_stop_pcu_recv(ah); /* disable PCU */
+ ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
@@ -1602,7 +1582,7 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
struct sk_buff *skb, struct ath5k_rx_status *rs)
{
struct ieee80211_hdr *hdr = (void *)skb->data;
- unsigned int keyix, hlen = ieee80211_get_hdrlen_from_skb(skb);
+ unsigned int keyix, hlen;
if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
rs->rs_keyix != AR5K_RXKEYIX_INVALID)
@@ -1611,6 +1591,7 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
/* Apparently when a default key is used to decrypt the packet
the hw does not set the index used to decrypt. In such cases
get the index from the packet. */
+ hlen = ieee80211_hdrlen(hdr->frame_control);
if (ieee80211_has_protected(hdr->frame_control) &&
!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
skb->len >= hlen + 4) {
@@ -1768,7 +1749,7 @@ ath5k_tasklet_rx(unsigned long data)
/* let crypto-error packets fall through in MNTR */
if ((rs.rs_status &
~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
- sc->opmode != IEEE80211_IF_TYPE_MNTR)
+ sc->opmode != NL80211_IFTYPE_MONITOR)
goto next;
}
accept:
@@ -1824,10 +1805,14 @@ accept:
rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
+ if (rxs.rate_idx >= 0 && rs.rs_rate ==
+ sc->curband->bitrates[rxs.rate_idx].hw_value_short)
+ rxs.flag |= RX_FLAG_SHORTPRE;
+
ath5k_debug_dump_skb(sc, skb, "RX ", 0);
/* check beacons in IBSS mode */
- if (sc->opmode == IEEE80211_IF_TYPE_IBSS)
+ if (sc->opmode == NL80211_IFTYPE_ADHOC)
ath5k_check_ibss_tsf(sc, skb, &rxs);
__ieee80211_rx(sc->hw, skb, &rxs);
@@ -1853,7 +1838,7 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
struct ath5k_desc *ds;
struct sk_buff *skb;
struct ieee80211_tx_info *info;
- int ret;
+ int i, ret;
spin_lock(&txq->lock);
list_for_each_entry_safe(bf, bf0, &txq->q, list) {
@@ -1875,7 +1860,25 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
PCI_DMA_TODEVICE);
- info->status.retry_count = ts.ts_shortretry + ts.ts_longretry / 6;
+ memset(&info->status, 0, sizeof(info->status));
+ info->tx_rate_idx = ath5k_hw_to_driver_rix(sc,
+ ts.ts_rate[ts.ts_final_idx]);
+ info->status.retry_count = ts.ts_longretry;
+
+ for (i = 0; i < 4; i++) {
+ struct ieee80211_tx_altrate *r =
+ &info->status.retries[i];
+
+ if (ts.ts_rate[i]) {
+ r->rate_idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
+ r->limit = ts.ts_retry[i];
+ } else {
+ r->rate_idx = -1;
+ r->limit = 0;
+ }
+ }
+
+ info->status.excessive_retries = 0;
if (unlikely(ts.ts_status)) {
sc->ll_stats.dot11ACKFailureCount++;
if (ts.ts_status & AR5K_TXERR_XRETRY)
@@ -1942,7 +1945,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
ds = bf->desc;
flags = AR5K_TXDESC_NOACK;
- if (sc->opmode == IEEE80211_IF_TYPE_IBSS && ath5k_hw_hasveol(ah)) {
+ if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
ds->ds_link = bf->daddr; /* self-linked */
flags |= AR5K_TXDESC_VEOL;
/*
@@ -1991,8 +1994,8 @@ ath5k_beacon_send(struct ath5k_softc *sc)
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
- if (unlikely(bf->skb == NULL || sc->opmode == IEEE80211_IF_TYPE_STA ||
- sc->opmode == IEEE80211_IF_TYPE_MNTR)) {
+ if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
+ sc->opmode == NL80211_IFTYPE_MONITOR)) {
ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
return;
}
@@ -2032,8 +2035,8 @@ ath5k_beacon_send(struct ath5k_softc *sc)
/* NB: hw still stops DMA, so proceed */
}
- ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
- ath5k_hw_tx_start(ah, sc->bhalq);
+ ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
+ ath5k_hw_start_tx_dma(ah, sc->bhalq);
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
@@ -2162,13 +2165,13 @@ ath5k_beacon_config(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
- ath5k_hw_set_intr(ah, 0);
+ ath5k_hw_set_imr(ah, 0);
sc->bmisscount = 0;
sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
- if (sc->opmode == IEEE80211_IF_TYPE_STA) {
+ if (sc->opmode == NL80211_IFTYPE_STATION) {
sc->imask |= AR5K_INT_BMISS;
- } else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+ } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
/*
* In IBSS mode we use a self-linked tx descriptor and let the
* hardware send the beacons automatically. We have to load it
@@ -2188,7 +2191,7 @@ ath5k_beacon_config(struct ath5k_softc *sc)
}
/* TODO else AP */
- ath5k_hw_set_intr(ah, sc->imask);
+ ath5k_hw_set_imr(ah, sc->imask);
}
@@ -2220,36 +2223,13 @@ ath5k_init(struct ath5k_softc *sc)
*/
sc->curchan = sc->hw->conf.channel;
sc->curband = &sc->sbands[sc->curchan->band];
- ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false);
- if (ret) {
- ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret);
- goto done;
- }
- /*
- * This is needed only to setup initial state
- * but it's best done after a reset.
- */
- ath5k_hw_set_txpower_limit(sc->ah, 0);
-
- /*
- * Setup the hardware after reset: the key cache
- * is filled as needed and the receive engine is
- * set going. Frame transmit is handled entirely
- * in the frame output path; there's nothing to do
- * here except setup the interrupt mask.
- */
- ret = ath5k_rx_start(sc);
- if (ret)
- goto done;
-
- /*
- * Enable interrupts.
- */
sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL |
AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL |
AR5K_INT_MIB;
+ ret = ath5k_reset(sc, false, false);
+ if (ret)
+ goto done;
- ath5k_hw_set_intr(sc->ah, sc->imask);
/* Set ack to be sent at low bit-rates */
ath5k_hw_set_ack_bitrate_high(sc->ah, false);
@@ -2290,7 +2270,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
if (!test_bit(ATH_STAT_INVALID, sc->status)) {
ath5k_led_off(sc);
- ath5k_hw_set_intr(ah, 0);
+ ath5k_hw_set_imr(ah, 0);
synchronize_irq(sc->pdev->irq);
}
ath5k_txq_cleanup(sc);
@@ -2396,7 +2376,7 @@ ath5k_intr(int irq, void *dev_id)
* transmission time) in order to detect wether
* automatic TSF updates happened.
*/
- if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+ if (sc->opmode == NL80211_IFTYPE_ADHOC) {
/* XXX: only if VEOL suppported */
u64 tsf = ath5k_hw_get_tsf64(ah);
sc->nexttbtt += sc->bintval;
@@ -2451,7 +2431,7 @@ ath5k_tasklet_reset(unsigned long data)
{
struct ath5k_softc *sc = (void *)data;
- ath5k_reset(sc->hw);
+ ath5k_reset_wake(sc);
}
/*
@@ -2474,7 +2454,7 @@ ath5k_calibrate(unsigned long data)
* to load new gain values.
*/
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
- ath5k_reset(sc->hw);
+ ath5k_reset_wake(sc);
}
if (ath5k_hw_phy_calibrate(ah, sc->curchan))
ATH5K_ERR(sc, "calibration of channel %u failed\n",
@@ -2626,7 +2606,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
ath5k_debug_dump_skb(sc, skb, "TX ", 1);
- if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
+ if (sc->opmode == NL80211_IFTYPE_MONITOR)
ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
/*
@@ -2675,48 +2655,67 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
}
static int
-ath5k_reset(struct ieee80211_hw *hw)
+ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
{
- struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
int ret;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
- ath5k_hw_set_intr(ah, 0);
- ath5k_txq_cleanup(sc);
- ath5k_rx_stop(sc);
-
+ if (stop) {
+ ath5k_hw_set_imr(ah, 0);
+ ath5k_txq_cleanup(sc);
+ ath5k_rx_stop(sc);
+ }
ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
- if (unlikely(ret)) {
+ if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
goto err;
}
+
+ /*
+ * This is needed only to setup initial state
+ * but it's best done after a reset.
+ */
ath5k_hw_set_txpower_limit(sc->ah, 0);
ret = ath5k_rx_start(sc);
- if (unlikely(ret)) {
+ if (ret) {
ATH5K_ERR(sc, "can't start recv logic\n");
goto err;
}
+
/*
- * We may be doing a reset in response to an ioctl
- * that changes the channel so update any state that
- * might change as a result.
+ * Change channels and update the h/w rate map if we're switching;
+ * e.g. 11a to 11b/g.
+ *
+ * We may be doing a reset in response to an ioctl that changes the
+ * channel so update any state that might change as a result.
*
* XXX needed?
*/
/* ath5k_chan_change(sc, c); */
- ath5k_beacon_config(sc);
- /* intrs are started by ath5k_beacon_config */
- ieee80211_wake_queues(hw);
+ ath5k_beacon_config(sc);
+ /* intrs are enabled by ath5k_beacon_config */
return 0;
err:
return ret;
}
+static int
+ath5k_reset_wake(struct ath5k_softc *sc)
+{
+ int ret;
+
+ ret = ath5k_reset(sc, true, true);
+ if (!ret)
+ ieee80211_wake_queues(sc->hw);
+
+ return ret;
+}
+
static int ath5k_start(struct ieee80211_hw *hw)
{
return ath5k_init(hw->priv);
@@ -2742,9 +2741,9 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
sc->vif = conf->vif;
switch (conf->type) {
- case IEEE80211_IF_TYPE_STA:
- case IEEE80211_IF_TYPE_IBSS:
- case IEEE80211_IF_TYPE_MNTR:
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MONITOR:
sc->opmode = conf->type;
break;
default:
@@ -2815,7 +2814,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
}
if (conf->changed & IEEE80211_IFCC_BEACON &&
- vif->type == IEEE80211_IF_TYPE_IBSS) {
+ vif->type == NL80211_IFTYPE_ADHOC) {
struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
if (!beacon) {
ret = -ENOMEM;
@@ -2827,7 +2826,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
mutex_unlock(&sc->lock);
- return ath5k_reset(hw);
+ return ath5k_reset_wake(sc);
unlock:
mutex_unlock(&sc->lock);
return ret;
@@ -2934,16 +2933,17 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
/* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
- if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
+ if (sc->opmode == NL80211_IFTYPE_MONITOR)
rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
- if (sc->opmode != IEEE80211_IF_TYPE_STA)
+ if (sc->opmode != NL80211_IFTYPE_STATION)
rfilt |= AR5K_RX_FILTER_PROBEREQ;
- if (sc->opmode != IEEE80211_IF_TYPE_AP &&
+ if (sc->opmode != NL80211_IFTYPE_AP &&
+ sc->opmode != NL80211_IFTYPE_MESH_POINT &&
test_bit(ATH_STAT_PROMISC, sc->status))
rfilt |= AR5K_RX_FILTER_PROM;
- if (sc->opmode == IEEE80211_IF_TYPE_STA ||
- sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+ if (sc->opmode == NL80211_IFTYPE_STATION ||
+ sc->opmode == NL80211_IFTYPE_ADHOC) {
rfilt |= AR5K_RX_FILTER_BEACON;
}
@@ -3048,7 +3048,7 @@ ath5k_reset_tsf(struct ieee80211_hw *hw)
* in IBSS mode we need to update the beacon timers too.
* this will also reset the TSF if we call it with 0
*/
- if (sc->opmode == IEEE80211_IF_TYPE_IBSS)
+ if (sc->opmode == NL80211_IFTYPE_ADHOC)
ath5k_beacon_update_timers(sc, 0);
else
ath5k_hw_reset_tsf(sc->ah);
@@ -3063,7 +3063,7 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
ath5k_debug_dump_skb(sc, skb, "BC ", 1);
- if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
+ if (sc->opmode != NL80211_IFTYPE_ADHOC) {
ret = -EIO;
goto end;
}
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index 7ec2f377d5c7..9d0b728928e3 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -111,17 +111,13 @@ struct ath5k_softc {
struct ieee80211_hw *hw; /* IEEE 802.11 common */
struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
struct ieee80211_channel channels[ATH_CHAN_MAX];
- struct ieee80211_rate rates[AR5K_MAX_RATES * IEEE80211_NUM_BANDS];
- enum ieee80211_if_types opmode;
+ struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
+ u8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
+ enum nl80211_iftype opmode;
struct ath5k_hw *ah; /* Atheros HW */
struct ieee80211_supported_band *curband;
- u8 a_rates;
- u8 b_rates;
- u8 g_rates;
- u8 xr_rates;
-
#ifdef CONFIG_ATH5K_DEBUG
struct ath5k_dbg_info debug; /* debug info */
#endif /* CONFIG_ATH5K_DEBUG */
diff --git a/drivers/net/wireless/ath5k/caps.c b/drivers/net/wireless/ath5k/caps.c
new file mode 100644
index 000000000000..150f5ed204a0
--- /dev/null
+++ b/drivers/net/wireless/ath5k/caps.c
@@ -0,0 +1,193 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/**************\
+* Capabilities *
+\**************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Fill the capabilities struct
+ * TODO: Merge this with EEPROM code when we are done with it
+ */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
+{
+ u16 ee_header;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Capabilities stored in the EEPROM */
+ ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ /*
+ * Set radio capabilities
+ * (The AR5110 only supports the middle 5GHz band)
+ */
+ ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
+ ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
+ ah->ah_capabilities.cap_range.range_2ghz_min = 0;
+ ah->ah_capabilities.cap_range.range_2ghz_max = 0;
+
+ /* Set supported modes */
+ __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode);
+ __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode);
+ } else {
+ /*
+ * XXX The tranceiver supports frequencies from 4920 to 6100GHz
+ * XXX and from 2312 to 2732GHz. There are problems with the
+ * XXX current ieee80211 implementation because the IEEE
+ * XXX channel mapping does not support negative channel
+ * XXX numbers (2312MHz is channel -19). Of course, this
+ * XXX doesn't matter because these channels are out of range
+ * XXX but some regulation domains like MKK (Japan) will
+ * XXX support frequencies somewhere around 4.8GHz.
+ */
+
+ /*
+ * Set radio capabilities
+ */
+
+ if (AR5K_EEPROM_HDR_11A(ee_header)) {
+ /* 4920 */
+ ah->ah_capabilities.cap_range.range_5ghz_min = 5005;
+ ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
+
+ /* Set supported modes */
+ __set_bit(AR5K_MODE_11A,
+ ah->ah_capabilities.cap_mode);
+ __set_bit(AR5K_MODE_11A_TURBO,
+ ah->ah_capabilities.cap_mode);
+ if (ah->ah_version == AR5K_AR5212)
+ __set_bit(AR5K_MODE_11G_TURBO,
+ ah->ah_capabilities.cap_mode);
+ }
+
+ /* Enable 802.11b if a 2GHz capable radio (2111/5112) is
+ * connected */
+ if (AR5K_EEPROM_HDR_11B(ee_header) ||
+ AR5K_EEPROM_HDR_11G(ee_header)) {
+ /* 2312 */
+ ah->ah_capabilities.cap_range.range_2ghz_min = 2412;
+ ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
+
+ if (AR5K_EEPROM_HDR_11B(ee_header))
+ __set_bit(AR5K_MODE_11B,
+ ah->ah_capabilities.cap_mode);
+
+ if (AR5K_EEPROM_HDR_11G(ee_header))
+ __set_bit(AR5K_MODE_11G,
+ ah->ah_capabilities.cap_mode);
+ }
+ }
+
+ /* GPIO */
+ ah->ah_gpio_npins = AR5K_NUM_GPIO;
+
+ /* Set number of supported TX queues */
+ if (ah->ah_version == AR5K_AR5210)
+ ah->ah_capabilities.cap_queues.q_tx_num =
+ AR5K_NUM_TX_QUEUES_NOQCU;
+ else
+ ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
+
+ return 0;
+}
+
+/* Main function used by the driver part to check caps */
+int ath5k_hw_get_capability(struct ath5k_hw *ah,
+ enum ath5k_capability_type cap_type,
+ u32 capability, u32 *result)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ switch (cap_type) {
+ case AR5K_CAP_NUM_TXQUEUES:
+ if (result) {
+ if (ah->ah_version == AR5K_AR5210)
+ *result = AR5K_NUM_TX_QUEUES_NOQCU;
+ else
+ *result = AR5K_NUM_TX_QUEUES;
+ goto yes;
+ }
+ case AR5K_CAP_VEOL:
+ goto yes;
+ case AR5K_CAP_COMPRESSION:
+ if (ah->ah_version == AR5K_AR5212)
+ goto yes;
+ else
+ goto no;
+ case AR5K_CAP_BURST:
+ goto yes;
+ case AR5K_CAP_TPC:
+ goto yes;
+ case AR5K_CAP_BSSIDMASK:
+ if (ah->ah_version == AR5K_AR5212)
+ goto yes;
+ else
+ goto no;
+ case AR5K_CAP_XR:
+ if (ah->ah_version == AR5K_AR5212)
+ goto yes;
+ else
+ goto no;
+ default:
+ goto no;
+ }
+
+no:
+ return -EINVAL;
+yes:
+ return 0;
+}
+
+/*
+ * TODO: Following functions should be part of a new function
+ * set_capability
+ */
+
+int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid,
+ u16 assoc_id)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ if (ah->ah_version == AR5K_AR5210) {
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+ return 0;
+ }
+
+ return -EIO;
+}
+
+int ath5k_hw_disable_pspoll(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ if (ah->ah_version == AR5K_AR5210) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+ return 0;
+ }
+
+ return -EIO;
+}
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c
index 6fa6c8e04ff0..8f92d670f614 100644
--- a/drivers/net/wireless/ath5k/debug.c
+++ b/drivers/net/wireless/ath5k/debug.c
@@ -58,8 +58,8 @@
* THE POSSIBILITY OF SUCH DAMAGES.
*/
-#include "debug.h"
#include "base.h"
+#include "debug.h"
static unsigned int ath5k_debug;
module_param_named(debug, ath5k_debug, uint, 0);
@@ -525,7 +525,7 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah)
return;
printk(KERN_DEBUG "rx queue %x, link %p\n",
- ath5k_hw_get_rx_buf(ah), sc->rxlink);
+ ath5k_hw_get_rxdp(ah), sc->rxlink);
spin_lock_bh(&sc->rxbuflock);
list_for_each_entry(bf, &sc->rxbuf, list) {
diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c
new file mode 100644
index 000000000000..dd1374052ba9
--- /dev/null
+++ b/drivers/net/wireless/ath5k/desc.c
@@ -0,0 +1,692 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/******************************\
+ Hardware Descriptor Functions
+\******************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * TX Descriptors
+ */
+
+/*
+ * Initialize the 2-word tx control descriptor on 5210/5211
+ */
+static int
+ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type,
+ unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0,
+ unsigned int key_index, unsigned int antenna_mode, unsigned int flags,
+ unsigned int rtscts_rate, unsigned int rtscts_duration)
+{
+ u32 frame_type;
+ struct ath5k_hw_2w_tx_ctl *tx_ctl;
+ unsigned int frame_len;
+
+ tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
+
+ /*
+ * Validate input
+ * - Zero retries don't make sense.
+ * - A zero rate will put the HW into a mode where it continously sends
+ * noise on the channel, so it is important to avoid this.
+ */
+ if (unlikely(tx_tries0 == 0)) {
+ ATH5K_ERR(ah->ah_sc, "zero retries\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ if (unlikely(tx_rate0 == 0)) {
+ ATH5K_ERR(ah->ah_sc, "zero rate\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ /* Clear descriptor */
+ memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc));
+
+ /* Setup control descriptor */
+
+ /* Verify and set frame length */
+
+ /* remove padding we might have added before */
+ frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
+
+ if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
+ return -EINVAL;
+
+ tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
+
+ /* Verify and set buffer length */
+
+ /* NB: beacon's BufLen must be a multiple of 4 bytes */
+ if (type == AR5K_PKT_TYPE_BEACON)
+ pkt_len = roundup(pkt_len, 4);
+
+ if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
+ return -EINVAL;
+
+ tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
+
+ /*
+ * Verify and set header length
+ * XXX: I only found that on 5210 code, does it work on 5211 ?
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN)
+ return -EINVAL;
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN);
+ }
+
+ /*Diferences between 5210-5211*/
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (type) {
+ case AR5K_PKT_TYPE_BEACON:
+ case AR5K_PKT_TYPE_PROBE_RESP:
+ frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY;
+ case AR5K_PKT_TYPE_PIFS:
+ frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS;
+ default:
+ frame_type = type /*<< 2 ?*/;
+ }
+
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) |
+ AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+
+ } else {
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) |
+ AR5K_REG_SM(antenna_mode,
+ AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT);
+ tx_ctl->tx_control_1 |=
+ AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE);
+ }
+#define _TX_FLAGS(_c, _flag) \
+ if (flags & AR5K_TXDESC_##_flag) { \
+ tx_ctl->tx_control_##_c |= \
+ AR5K_2W_TX_DESC_CTL##_c##_##_flag; \
+ }
+
+ _TX_FLAGS(0, CLRDMASK);
+ _TX_FLAGS(0, VEOL);
+ _TX_FLAGS(0, INTREQ);
+ _TX_FLAGS(0, RTSENA);
+ _TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+ /*
+ * WEP crap
+ */
+ if (key_index != AR5K_TXKEYIX_INVALID) {
+ tx_ctl->tx_control_0 |=
+ AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+ tx_ctl->tx_control_1 |=
+ AR5K_REG_SM(key_index,
+ AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
+ }
+
+ /*
+ * RTS/CTS Duration [5210 ?]
+ */
+ if ((ah->ah_version == AR5K_AR5210) &&
+ (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)))
+ tx_ctl->tx_control_1 |= rtscts_duration &
+ AR5K_2W_TX_DESC_CTL1_RTS_DURATION;
+
+ return 0;
+}
+
+/*
+ * Initialize the 4-word tx control descriptor on 5212
+ */
+static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
+ struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len,
+ enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0,
+ unsigned int tx_tries0, unsigned int key_index,
+ unsigned int antenna_mode, unsigned int flags,
+ unsigned int rtscts_rate,
+ unsigned int rtscts_duration)
+{
+ struct ath5k_hw_4w_tx_ctl *tx_ctl;
+ unsigned int frame_len;
+
+ ATH5K_TRACE(ah->ah_sc);
+ tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+
+ /*
+ * Validate input
+ * - Zero retries don't make sense.
+ * - A zero rate will put the HW into a mode where it continously sends
+ * noise on the channel, so it is important to avoid this.
+ */
+ if (unlikely(tx_tries0 == 0)) {
+ ATH5K_ERR(ah->ah_sc, "zero retries\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ if (unlikely(tx_rate0 == 0)) {
+ ATH5K_ERR(ah->ah_sc, "zero rate\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ /* Clear descriptor */
+ memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
+
+ /* Setup control descriptor */
+
+ /* Verify and set frame length */
+
+ /* remove padding we might have added before */
+ frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
+
+ if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
+ return -EINVAL;
+
+ tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
+
+ /* Verify and set buffer length */
+
+ /* NB: beacon's BufLen must be a multiple of 4 bytes */
+ if (type == AR5K_PKT_TYPE_BEACON)
+ pkt_len = roundup(pkt_len, 4);
+
+ if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
+ return -EINVAL;
+
+ tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
+
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
+ AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
+ tx_ctl->tx_control_1 |= AR5K_REG_SM(type,
+ AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
+ tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES,
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
+ tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+
+#define _TX_FLAGS(_c, _flag) \
+ if (flags & AR5K_TXDESC_##_flag) { \
+ tx_ctl->tx_control_##_c |= \
+ AR5K_4W_TX_DESC_CTL##_c##_##_flag; \
+ }
+
+ _TX_FLAGS(0, CLRDMASK);
+ _TX_FLAGS(0, VEOL);
+ _TX_FLAGS(0, INTREQ);
+ _TX_FLAGS(0, RTSENA);
+ _TX_FLAGS(0, CTSENA);
+ _TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+ /*
+ * WEP crap
+ */
+ if (key_index != AR5K_TXKEYIX_INVALID) {
+ tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+ tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index,
+ AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
+ }
+
+ /*
+ * RTS/CTS
+ */
+ if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) {
+ if ((flags & AR5K_TXDESC_RTSENA) &&
+ (flags & AR5K_TXDESC_CTSENA))
+ return -EINVAL;
+ tx_ctl->tx_control_2 |= rtscts_duration &
+ AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
+ tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate,
+ AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE);
+ }
+
+ return 0;
+}
+
+/*
+ * Initialize a 4-word multi rate retry tx control descriptor on 5212
+ */
+static int
+ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
+ u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3)
+{
+ struct ath5k_hw_4w_tx_ctl *tx_ctl;
+
+ /*
+ * Rates can be 0 as long as the retry count is 0 too.
+ * A zero rate and nonzero retry count will put the HW into a mode where
+ * it continously sends noise on the channel, so it is important to
+ * avoid this.
+ */
+ if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
+ (tx_rate2 == 0 && tx_tries2 != 0) ||
+ (tx_rate3 == 0 && tx_tries3 != 0))) {
+ ATH5K_ERR(ah->ah_sc, "zero rate\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ if (ah->ah_version == AR5K_AR5212) {
+ tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+
+#define _XTX_TRIES(_n) \
+ if (tx_tries##_n) { \
+ tx_ctl->tx_control_2 |= \
+ AR5K_REG_SM(tx_tries##_n, \
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \
+ tx_ctl->tx_control_3 |= \
+ AR5K_REG_SM(tx_rate##_n, \
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \
+ }
+
+ _XTX_TRIES(1);
+ _XTX_TRIES(2);
+ _XTX_TRIES(3);
+
+#undef _XTX_TRIES
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/* no mrr support for cards older than 5212 */
+static int
+ath5k_hw_setup_no_mrr(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
+ u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3)
+{
+ return 0;
+}
+
+/*
+ * Proccess the tx status descriptor on 5210/5211
+ */
+static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc, struct ath5k_tx_status *ts)
+{
+ struct ath5k_hw_2w_tx_ctl *tx_ctl;
+ struct ath5k_hw_tx_status *tx_status;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
+ tx_status = &desc->ud.ds_tx5210.tx_stat;
+
+ /* No frame has been send or error */
+ if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
+ return -EINPROGRESS;
+
+ /*
+ * Get descriptor status
+ */
+ ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+ ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+ ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+ /*TODO: ts->ts_virtcol + test*/
+ ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_SEQ_NUM);
+ ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+ ts->ts_antenna = 1;
+ ts->ts_status = 0;
+ ts->ts_rate[0] = AR5K_REG_MS(tx_ctl->tx_control_0,
+ AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+ ts->ts_retry[0] = ts->ts_longretry;
+ ts->ts_final_idx = 0;
+
+ if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+ if (tx_status->tx_status_0 &
+ AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+ ts->ts_status |= AR5K_TXERR_XRETRY;
+
+ if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+ ts->ts_status |= AR5K_TXERR_FIFO;
+
+ if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+ ts->ts_status |= AR5K_TXERR_FILT;
+ }
+
+ return 0;
+}
+
+/*
+ * Proccess a tx status descriptor on 5212
+ */
+static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc, struct ath5k_tx_status *ts)
+{
+ struct ath5k_hw_4w_tx_ctl *tx_ctl;
+ struct ath5k_hw_tx_status *tx_status;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+ tx_status = &desc->ud.ds_tx5212.tx_stat;
+
+ /* No frame has been send or error */
+ if (unlikely(!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE)))
+ return -EINPROGRESS;
+
+ /*
+ * Get descriptor status
+ */
+ ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+ ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+ ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+ ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_SEQ_NUM);
+ ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+ ts->ts_antenna = (tx_status->tx_status_1 &
+ AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1;
+ ts->ts_status = 0;
+
+ ts->ts_final_idx = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX);
+
+ /* The longretry counter has the number of un-acked retries
+ * for the final rate. To get the total number of retries
+ * we have to add the retry counters for the other rates
+ * as well
+ */
+ ts->ts_retry[ts->ts_final_idx] = ts->ts_longretry;
+ switch (ts->ts_final_idx) {
+ case 3:
+ ts->ts_rate[3] = AR5K_REG_MS(tx_ctl->tx_control_3,
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
+
+ ts->ts_retry[2] = AR5K_REG_MS(tx_ctl->tx_control_2,
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
+ ts->ts_longretry += ts->ts_retry[2];
+ /* fall through */
+ case 2:
+ ts->ts_rate[2] = AR5K_REG_MS(tx_ctl->tx_control_3,
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
+
+ ts->ts_retry[1] = AR5K_REG_MS(tx_ctl->tx_control_2,
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
+ ts->ts_longretry += ts->ts_retry[1];
+ /* fall through */
+ case 1:
+ ts->ts_rate[1] = AR5K_REG_MS(tx_ctl->tx_control_3,
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE1);
+
+ ts->ts_retry[0] = AR5K_REG_MS(tx_ctl->tx_control_2,
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
+ ts->ts_longretry += ts->ts_retry[0];
+ /* fall through */
+ case 0:
+ ts->ts_rate[0] = tx_ctl->tx_control_3 &
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+ break;
+ }
+
+ /* TX error */
+ if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+ if (tx_status->tx_status_0 &
+ AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+ ts->ts_status |= AR5K_TXERR_XRETRY;
+
+ if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+ ts->ts_status |= AR5K_TXERR_FIFO;
+
+ if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+ ts->ts_status |= AR5K_TXERR_FILT;
+ }
+
+ return 0;
+}
+
+/*
+ * RX Descriptors
+ */
+
+/*
+ * Initialize an rx control descriptor
+ */
+static int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ u32 size, unsigned int flags)
+{
+ struct ath5k_hw_rx_ctl *rx_ctl;
+
+ ATH5K_TRACE(ah->ah_sc);
+ rx_ctl = &desc->ud.ds_rx.rx_ctl;
+
+ /*
+ * Clear the descriptor
+ * If we don't clean the status descriptor,
+ * while scanning we get too many results,
+ * most of them virtual, after some secs
+ * of scanning system hangs. M.F.
+ */
+ memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc));
+
+ /* Setup descriptor */
+ rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN;
+ if (unlikely(rx_ctl->rx_control_1 != size))
+ return -EINVAL;
+
+ if (flags & AR5K_RXDESC_INTREQ)
+ rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ;
+
+ return 0;
+}
+
+/*
+ * Proccess the rx status descriptor on 5210/5211
+ */
+static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc, struct ath5k_rx_status *rs)
+{
+ struct ath5k_hw_rx_status *rx_status;
+
+ rx_status = &desc->ud.ds_rx.u.rx_stat;
+
+ /* No frame received / not ready */
+ if (unlikely(!(rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_DONE)))
+ return -EINPROGRESS;
+
+ /*
+ * Frame receive status
+ */
+ rs->rs_datalen = rx_status->rx_status_0 &
+ AR5K_5210_RX_DESC_STATUS0_DATA_LEN;
+ rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+ rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE);
+ rs->rs_antenna = rx_status->rx_status_0 &
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA;
+ rs->rs_more = rx_status->rx_status_0 &
+ AR5K_5210_RX_DESC_STATUS0_MORE;
+ /* TODO: this timestamp is 13 bit, later on we assume 15 bit */
+ rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+ rs->rs_status = 0;
+ rs->rs_phyerr = 0;
+
+ /*
+ * Key table status
+ */
+ if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID)
+ rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5210_RX_DESC_STATUS1_KEY_INDEX);
+ else
+ rs->rs_keyix = AR5K_RXKEYIX_INVALID;
+
+ /*
+ * Receive/descriptor errors
+ */
+ if (!(rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_CRC;
+
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN)
+ rs->rs_status |= AR5K_RXERR_FIFO;
+
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
+ rs->rs_status |= AR5K_RXERR_PHY;
+ rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
+ }
+
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_DECRYPT;
+ }
+
+ return 0;
+}
+
+/*
+ * Proccess the rx status descriptor on 5212
+ */
+static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc, struct ath5k_rx_status *rs)
+{
+ struct ath5k_hw_rx_status *rx_status;
+ struct ath5k_hw_rx_error *rx_err;
+
+ ATH5K_TRACE(ah->ah_sc);
+ rx_status = &desc->ud.ds_rx.u.rx_stat;
+
+ /* Overlay on error */
+ rx_err = &desc->ud.ds_rx.u.rx_err;
+
+ /* No frame received / not ready */
+ if (unlikely(!(rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_DONE)))
+ return -EINPROGRESS;
+
+ /*
+ * Frame receive status
+ */
+ rs->rs_datalen = rx_status->rx_status_0 &
+ AR5K_5212_RX_DESC_STATUS0_DATA_LEN;
+ rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+ rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE);
+ rs->rs_antenna = rx_status->rx_status_0 &
+ AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA;
+ rs->rs_more = rx_status->rx_status_0 &
+ AR5K_5212_RX_DESC_STATUS0_MORE;
+ rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+ rs->rs_status = 0;
+ rs->rs_phyerr = 0;
+
+ /*
+ * Key table status
+ */
+ if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID)
+ rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5212_RX_DESC_STATUS1_KEY_INDEX);
+ else
+ rs->rs_keyix = AR5K_RXKEYIX_INVALID;
+
+ /*
+ * Receive/descriptor errors
+ */
+ if (!(rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+ if (rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_CRC;
+
+ if (rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
+ rs->rs_status |= AR5K_RXERR_PHY;
+ rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
+ AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
+ }
+
+ if (rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_DECRYPT;
+
+ if (rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_MIC_ERROR)
+ rs->rs_status |= AR5K_RXERR_MIC;
+ }
+
+ return 0;
+}
+
+/*
+ * Init function pointers inside ath5k_hw struct
+ */
+int ath5k_hw_init_desc_functions(struct ath5k_hw *ah)
+{
+
+ if (ah->ah_version != AR5K_AR5210 &&
+ ah->ah_version != AR5K_AR5211 &&
+ ah->ah_version != AR5K_AR5212)
+ return -ENOTSUPP;
+
+ /* XXX: What is this magic value and where is it used ? */
+ if (ah->ah_version == AR5K_AR5212)
+ ah->ah_magic = AR5K_EEPROM_MAGIC_5212;
+ else if (ah->ah_version == AR5K_AR5211)
+ ah->ah_magic = AR5K_EEPROM_MAGIC_5211;
+
+ if (ah->ah_version == AR5K_AR5212) {
+ ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc;
+ ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc;
+ ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc;
+ ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status;
+ } else {
+ ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc;
+ ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc;
+ ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_no_mrr;
+ ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status;
+ }
+
+ if (ah->ah_version == AR5K_AR5212)
+ ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status;
+ else if (ah->ah_version <= AR5K_AR5211)
+ ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status;
+
+ return 0;
+}
+
diff --git a/drivers/net/wireless/ath5k/hw.h b/drivers/net/wireless/ath5k/desc.h
index 64fca8dcb386..56158c804e3e 100644
--- a/drivers/net/wireless/ath5k/hw.h
+++ b/drivers/net/wireless/ath5k/desc.h
@@ -1,8 +1,6 @@
/*
- * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org>
- * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -15,159 +13,9 @@
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
*/
-#include <linux/delay.h>
-
-/*
- * Gain settings
- */
-
-enum ath5k_rfgain {
- AR5K_RFGAIN_INACTIVE = 0,
- AR5K_RFGAIN_READ_REQUESTED,
- AR5K_RFGAIN_NEED_CHANGE,
-};
-
-#define AR5K_GAIN_CRN_FIX_BITS_5111 4
-#define AR5K_GAIN_CRN_FIX_BITS_5112 7
-#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112
-#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15
-#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20
-#define AR5K_GAIN_CCK_PROBE_CORR 5
-#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15
-#define AR5K_GAIN_STEP_COUNT 10
-#define AR5K_GAIN_PARAM_TX_CLIP 0
-#define AR5K_GAIN_PARAM_PD_90 1
-#define AR5K_GAIN_PARAM_PD_84 2
-#define AR5K_GAIN_PARAM_GAIN_SEL 3
-#define AR5K_GAIN_PARAM_MIX_ORN 0
-#define AR5K_GAIN_PARAM_PD_138 1
-#define AR5K_GAIN_PARAM_PD_137 2
-#define AR5K_GAIN_PARAM_PD_136 3
-#define AR5K_GAIN_PARAM_PD_132 4
-#define AR5K_GAIN_PARAM_PD_131 5
-#define AR5K_GAIN_PARAM_PD_130 6
-#define AR5K_GAIN_CHECK_ADJUST(_g) \
- ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
-
-struct ath5k_gain_opt_step {
- s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
- s32 gos_gain;
-};
-
-struct ath5k_gain {
- u32 g_step_idx;
- u32 g_current;
- u32 g_target;
- u32 g_low;
- u32 g_high;
- u32 g_f_corr;
- u32 g_active;
- const struct ath5k_gain_opt_step *g_step;
-};
-
-
-/*
- * HW SPECIFIC STRUCTS
- */
-
-/* Some EEPROM defines */
-#define AR5K_EEPROM_EEP_SCALE 100
-#define AR5K_EEPROM_EEP_DELTA 10
-#define AR5K_EEPROM_N_MODES 3
-#define AR5K_EEPROM_N_5GHZ_CHAN 10
-#define AR5K_EEPROM_N_2GHZ_CHAN 3
-#define AR5K_EEPROM_MAX_CHAN 10
-#define AR5K_EEPROM_N_PCDAC 11
-#define AR5K_EEPROM_N_TEST_FREQ 8
-#define AR5K_EEPROM_N_EDGES 8
-#define AR5K_EEPROM_N_INTERCEPTS 11
-#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
-#define AR5K_EEPROM_PCDAC_M 0x3f
-#define AR5K_EEPROM_PCDAC_START 1
-#define AR5K_EEPROM_PCDAC_STOP 63
-#define AR5K_EEPROM_PCDAC_STEP 1
-#define AR5K_EEPROM_NON_EDGE_M 0x40
-#define AR5K_EEPROM_CHANNEL_POWER 8
-#define AR5K_EEPROM_N_OBDB 4
-#define AR5K_EEPROM_OBDB_DIS 0xffff
-#define AR5K_EEPROM_CHANNEL_DIS 0xff
-#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10)
-#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32)
-#define AR5K_EEPROM_MAX_CTLS 32
-#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4
-#define AR5K_EEPROM_N_XPD0_POINTS 4
-#define AR5K_EEPROM_N_XPD3_POINTS 3
-#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35
-#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55
-#define AR5K_EEPROM_POWER_M 0x3f
-#define AR5K_EEPROM_POWER_MIN 0
-#define AR5K_EEPROM_POWER_MAX 3150
-#define AR5K_EEPROM_POWER_STEP 50
-#define AR5K_EEPROM_POWER_TABLE_SIZE 64
-#define AR5K_EEPROM_N_POWER_LOC_11B 4
-#define AR5K_EEPROM_N_POWER_LOC_11G 6
-#define AR5K_EEPROM_I_GAIN 10
-#define AR5K_EEPROM_CCK_OFDM_DELTA 15
-#define AR5K_EEPROM_N_IQ_CAL 2
-
-/* Struct to hold EEPROM calibration data */
-struct ath5k_eeprom_info {
- u16 ee_magic;
- u16 ee_protect;
- u16 ee_regdomain;
- u16 ee_version;
- u16 ee_header;
- u16 ee_ant_gain;
- u16 ee_misc0;
- u16 ee_misc1;
- u16 ee_cck_ofdm_gain_delta;
- u16 ee_cck_ofdm_power_delta;
- u16 ee_scaled_cck_delta;
-
- /* Used for tx thermal adjustment (eeprom_init, rfregs) */
- u16 ee_tx_clip;
- u16 ee_pwd_84;
- u16 ee_pwd_90;
- u16 ee_gain_select;
-
- /* RF Calibration settings (reset, rfregs) */
- u16 ee_i_cal[AR5K_EEPROM_N_MODES];
- u16 ee_q_cal[AR5K_EEPROM_N_MODES];
- u16 ee_fixed_bias[AR5K_EEPROM_N_MODES];
- u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES];
- u16 ee_xr_power[AR5K_EEPROM_N_MODES];
- u16 ee_switch_settling[AR5K_EEPROM_N_MODES];
- u16 ee_ant_tx_rx[AR5K_EEPROM_N_MODES];
- u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
- u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
- u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
- u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
- u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
- u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
- u16 ee_thr_62[AR5K_EEPROM_N_MODES];
- u16 ee_xlna_gain[AR5K_EEPROM_N_MODES];
- u16 ee_xpd[AR5K_EEPROM_N_MODES];
- u16 ee_x_gain[AR5K_EEPROM_N_MODES];
- u16 ee_i_gain[AR5K_EEPROM_N_MODES];
- u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
-
- /* Unused */
- u16 ee_false_detect[AR5K_EEPROM_N_MODES];
- u16 ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN];
- u16 ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/
-
- /* Conformance test limits (Unused) */
- u16 ee_ctls;
- u16 ee_ctl[AR5K_EEPROM_MAX_CTLS];
-
- /* Noise Floor Calibration settings */
- s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
- s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES];
- s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES];
-};
-
/*
* Internal RX/TX descriptor structures
* (rX: reserved fields possibily used by future versions of the ar5k chipset)
@@ -178,14 +26,15 @@ struct ath5k_eeprom_info {
*/
struct ath5k_hw_rx_ctl {
u32 rx_control_0; /* RX control word 0 */
+ u32 rx_control_1; /* RX control word 1 */
+} __packed;
+/* RX control word 0 field/sflags */
#define AR5K_DESC_RX_CTL0 0x00000000
- u32 rx_control_1; /* RX control word 1 */
-
+/* RX control word 1 fields/flags */
#define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff
#define AR5K_DESC_RX_CTL1_INTREQ 0x00002000
-} __packed;
/*
* common hardware RX status descriptor
@@ -197,6 +46,7 @@ struct ath5k_hw_rx_status {
} __packed;
/* 5210/5211 */
+/* RX status word 0 fields/flags */
#define AR5K_5210_RX_DESC_STATUS0_DATA_LEN 0x00000fff
#define AR5K_5210_RX_DESC_STATUS0_MORE 0x00001000
#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000
@@ -205,6 +55,8 @@ struct ath5k_hw_rx_status {
#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 19
#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA 0x38000000
#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 27
+
+/* RX status word 1 fields/flags */
#define AR5K_5210_RX_DESC_STATUS1_DONE 0x00000001
#define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002
#define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004
@@ -220,6 +72,7 @@ struct ath5k_hw_rx_status {
#define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS 0x10000000
/* 5212 */
+/* RX status word 0 fields/flags */
#define AR5K_5212_RX_DESC_STATUS0_DATA_LEN 0x00000fff
#define AR5K_5212_RX_DESC_STATUS0_MORE 0x00001000
#define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR 0x00002000
@@ -229,6 +82,8 @@ struct ath5k_hw_rx_status {
#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 20
#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA 0xf0000000
#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 28
+
+/* RX status word 1 fields/flags */
#define AR5K_5212_RX_DESC_STATUS1_DONE 0x00000001
#define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002
#define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR 0x00000004
@@ -246,16 +101,18 @@ struct ath5k_hw_rx_status {
* common hardware RX error descriptor
*/
struct ath5k_hw_rx_error {
- u32 rx_error_0; /* RX error word 0 */
+ u32 rx_error_0; /* RX status word 0 */
+ u32 rx_error_1; /* RX status word 1 */
+} __packed;
+/* RX error word 0 fields/flags */
#define AR5K_RX_DESC_ERROR0 0x00000000
- u32 rx_error_1; /* RX error word 1 */
-
+/* RX error word 1 fields/flags */
#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE 0x0000ff00
#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S 8
-} __packed;
+/* PHY Error codes */
#define AR5K_DESC_RX_PHY_ERROR_NONE 0x00
#define AR5K_DESC_RX_PHY_ERROR_TIMING 0x20
#define AR5K_DESC_RX_PHY_ERROR_PARITY 0x40
@@ -270,7 +127,10 @@ struct ath5k_hw_rx_error {
*/
struct ath5k_hw_2w_tx_ctl {
u32 tx_control_0; /* TX control word 0 */
+ u32 tx_control_1; /* TX control word 1 */
+} __packed;
+/* TX control word 0 fields/flags */
#define AR5K_2W_TX_DESC_CTL0_FRAME_LEN 0x00000fff
#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN 0x0003f000 /*[5210 ?]*/
#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S 12
@@ -284,29 +144,34 @@ struct ath5k_hw_2w_tx_ctl {
#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S 26
#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000
#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000
-#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT (ah->ah_version == AR5K_AR5210 ? \
- AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \
- AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211)
+
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT \
+ (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \
+ AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211)
+
#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25
#define AR5K_2W_TX_DESC_CTL0_INTREQ 0x20000000
#define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000
- u32 tx_control_1; /* TX control word 1 */
-
+/* TX control word 1 fields/flags */
#define AR5K_2W_TX_DESC_CTL1_BUF_LEN 0x00000fff
#define AR5K_2W_TX_DESC_CTL1_MORE 0x00001000
#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 0x0007e000
#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211 0x000fe000
-#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX (ah->ah_version == AR5K_AR5210 ? \
- AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \
- AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211)
+
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX \
+ (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \
+ AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211)
+
#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13
#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE 0x00700000 /*[5211]*/
#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S 20
#define AR5K_2W_TX_DESC_CTL1_NOACK 0x00800000 /*[5211]*/
#define AR5K_2W_TX_DESC_CTL1_RTS_DURATION 0xfff80000 /*[5210 ?]*/
-} __packed;
+/* Frame types */
#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL 0x00
#define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM 0x04
#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL 0x08
@@ -378,7 +243,10 @@ struct ath5k_hw_4w_tx_ctl {
*/
struct ath5k_hw_tx_status {
u32 tx_status_0; /* TX status word 0 */
+ u32 tx_status_1; /* TX status word 1 */
+} __packed;
+/* TX status word 0 fields/flags */
#define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK 0x00000001
#define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES 0x00000002
#define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN 0x00000004
@@ -400,8 +268,7 @@ struct ath5k_hw_tx_status {
#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP 0xffff0000
#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S 16
- u32 tx_status_1; /* TX status word 1 */
-
+/* TX status word 1 fields/flags */
#define AR5K_DESC_TX_STATUS1_DONE 0x00000001
#define AR5K_DESC_TX_STATUS1_SEQ_NUM 0x00001ffe
#define AR5K_DESC_TX_STATUS1_SEQ_NUM_S 1
@@ -411,8 +278,6 @@ struct ath5k_hw_tx_status {
#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S 21
#define AR5K_DESC_TX_STATUS1_COMP_SUCCESS 0x00800000
#define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA 0x01000000
-} __packed;
-
/*
* 5210/5211 hardware TX descriptor
@@ -441,176 +306,27 @@ struct ath5k_hw_all_rx_desc {
} u;
} __packed;
-
/*
- * AR5K REGISTER ACCESS
+ * Atheros hardware descriptor
+ * This is read and written to by the hardware
*/
+struct ath5k_desc {
+ u32 ds_link; /* physical address of the next descriptor */
+ u32 ds_data; /* physical address of data buffer (skb) */
-/*Swap RX/TX Descriptor for big endian archs*/
-#if defined(__BIG_ENDIAN)
-#define AR5K_INIT_CFG ( \
- AR5K_CFG_SWTD | AR5K_CFG_SWRD \
-)
-#else
-#define AR5K_INIT_CFG 0x00000000
-#endif
-
-/*#define AR5K_REG_READ(_reg) ath5k_hw_reg_read(ah, _reg)
-
-#define AR5K_REG_WRITE(_reg, _val) ath5k_hw_reg_write(ah, _val, _reg)*/
-
-#define AR5K_REG_SM(_val, _flags) \
- (((_val) << _flags##_S) & (_flags))
-
-#define AR5K_REG_MS(_val, _flags) \
- (((_val) & (_flags)) >> _flags##_S)
-
-/* Some registers can hold multiple values of interest. For this
- * reason when we want to write to these registers we must first
- * retrieve the values which we do not want to clear (lets call this
- * old_data) and then set the register with this and our new_value:
- * ( old_data | new_value) */
-#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \
- ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
- (((_val) << _flags##_S) & (_flags)), _reg)
-
-#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \
- ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \
- (_mask)) | (_flags), _reg)
-
-#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \
- ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
-
-#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \
- ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
-
-#define AR5K_PHY_WRITE(ah, _reg, _val) \
- ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
-
-#define AR5K_PHY_READ(ah, _reg) \
- ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
-
-#define AR5K_REG_WAIT(_i) do { \
- if (_i % 64) \
- udelay(1); \
-} while (0)
-
-#define AR5K_EEPROM_READ(_o, _v) do { \
- if ((ret = ath5k_hw_eeprom_read(ah, (_o), &(_v))) != 0) \
- return (ret); \
-} while (0)
-
-#define AR5K_EEPROM_READ_HDR(_o, _v) \
- AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \
-
-/* Read status of selected queue */
-#define AR5K_REG_READ_Q(ah, _reg, _queue) \
- (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \
-
-#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \
- ath5k_hw_reg_write(ah, (1 << _queue), _reg)
-
-#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \
- _reg |= 1 << _queue; \
-} while (0)
-
-#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \
- _reg &= ~(1 << _queue); \
-} while (0)
-
-#define AR5K_LOW_ID(_a)( \
-(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \
-)
-
-#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8)
-
-/*
- * Initial register values
- */
-
-/*
- * Common initial register values
- */
-#define AR5K_INIT_MODE CHANNEL_B
-
-#define AR5K_INIT_TX_LATENCY 502
-#define AR5K_INIT_USEC 39
-#define AR5K_INIT_USEC_TURBO 79
-#define AR5K_INIT_USEC_32 31
-#define AR5K_INIT_CARR_SENSE_EN 1
-#define AR5K_INIT_PROG_IFS 920
-#define AR5K_INIT_PROG_IFS_TURBO 960
-#define AR5K_INIT_EIFS 3440
-#define AR5K_INIT_EIFS_TURBO 6880
-#define AR5K_INIT_SLOT_TIME 396
-#define AR5K_INIT_SLOT_TIME_TURBO 480
-#define AR5K_INIT_ACK_CTS_TIMEOUT 1024
-#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800
-#define AR5K_INIT_SIFS 560
-#define AR5K_INIT_SIFS_TURBO 480
-#define AR5K_INIT_SH_RETRY 10
-#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY
-#define AR5K_INIT_SSH_RETRY 32
-#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY
-#define AR5K_INIT_TX_RETRY 10
-#define AR5K_INIT_TOPS 8
-#define AR5K_INIT_RXNOFRM 8
-#define AR5K_INIT_RPGTO 0
-#define AR5K_INIT_TXNOFRM 0
-#define AR5K_INIT_BEACON_PERIOD 65535
-#define AR5K_INIT_TIM_OFFSET 0
-#define AR5K_INIT_BEACON_EN 0
-#define AR5K_INIT_RESET_TSF 0
-
-#define AR5K_INIT_TRANSMIT_LATENCY ( \
- (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
- (AR5K_INIT_USEC) \
-)
-#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \
- (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
- (AR5K_INIT_USEC_TURBO) \
-)
-#define AR5K_INIT_PROTO_TIME_CNTRL ( \
- (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \
- (AR5K_INIT_PROG_IFS) \
-)
-#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \
- (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
- (AR5K_INIT_PROG_IFS_TURBO) \
-)
-#define AR5K_INIT_BEACON_CONTROL ( \
- (AR5K_INIT_RESET_TSF << 24) | (AR5K_INIT_BEACON_EN << 23) | \
- (AR5K_INIT_TIM_OFFSET << 16) | (AR5K_INIT_BEACON_PERIOD) \
-)
-
-/*
- * Non-common initial register values which have to be loaded into the
- * card at boot time and after each reset.
- */
-
-/* Register dumps are done per operation mode */
-#define AR5K_INI_RFGAIN_5GHZ 0
-#define AR5K_INI_RFGAIN_2GHZ 1
-
-#define AR5K_INI_VAL_11A 0
-#define AR5K_INI_VAL_11A_TURBO 1
-#define AR5K_INI_VAL_11B 2
-#define AR5K_INI_VAL_11G 3
-#define AR5K_INI_VAL_11G_TURBO 4
-#define AR5K_INI_VAL_XR 0
-#define AR5K_INI_VAL_MAX 5
-
-#define AR5K_RF5111_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS
-#define AR5K_RF5112_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS
+ union {
+ struct ath5k_hw_5210_tx_desc ds_tx5210;
+ struct ath5k_hw_5212_tx_desc ds_tx5212;
+ struct ath5k_hw_all_rx_desc ds_rx;
+ } ud;
+} __packed;
-static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
-{
- u32 retval = 0, bit, i;
+#define AR5K_RXDESC_INTREQ 0x0020
- for (i = 0; i < bits; i++) {
- bit = (val >> i) & 1;
- retval = (retval << 1) | bit;
- }
+#define AR5K_TXDESC_CLRDMASK 0x0001
+#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/
+#define AR5K_TXDESC_RTSENA 0x0004
+#define AR5K_TXDESC_CTSENA 0x0008
+#define AR5K_TXDESC_INTREQ 0x0010
+#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/
- return retval;
-}
diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath5k/dma.c
new file mode 100644
index 000000000000..7adceb2c7fab
--- /dev/null
+++ b/drivers/net/wireless/ath5k/dma.c
@@ -0,0 +1,605 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* DMA and interrupt masking functions *
+\*************************************/
+
+/*
+ * dma.c - DMA and interrupt masking functions
+ *
+ * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and
+ * handle queue setup for 5210 chipset (rest are handled on qcu.c).
+ * Also we setup interrupt mask register (IMR) and read the various iterrupt
+ * status registers (ISR).
+ *
+ * TODO: Handle SISR on 5211+ and introduce a function to return the queue
+ * number that resulted the interrupt.
+ */
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*********\
+* Receive *
+\*********/
+
+/**
+ * ath5k_hw_start_rx_dma - Start DMA receive
+ *
+ * @ah: The &struct ath5k_hw
+ */
+void ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
+ ath5k_hw_reg_read(ah, AR5K_CR);
+}
+
+/**
+ * ath5k_hw_stop_rx_dma - Stop DMA receive
+ *
+ * @ah: The &struct ath5k_hw
+ */
+int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
+{
+ unsigned int i;
+
+ ATH5K_TRACE(ah->ah_sc);
+ ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR);
+
+ /*
+ * It may take some time to disable the DMA receive unit
+ */
+ for (i = 1000; i > 0 &&
+ (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
+ i--)
+ udelay(10);
+
+ return i ? 0 : -EBUSY;
+}
+
+/**
+ * ath5k_hw_get_rxdp - Get RX Descriptor's address
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * XXX: Is RXDP read and clear ?
+ */
+u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah)
+{
+ return ath5k_hw_reg_read(ah, AR5K_RXDP);
+}
+
+/**
+ * ath5k_hw_set_rxdp - Set RX Descriptor's address
+ *
+ * @ah: The &struct ath5k_hw
+ * @phys_addr: RX descriptor address
+ *
+ * XXX: Should we check if rx is enabled before setting rxdp ?
+ */
+void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
+}
+
+
+/**********\
+* Transmit *
+\**********/
+
+/**
+ * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Start DMA transmit for a specific queue and since 5210 doesn't have
+ * QCU/DCU, set up queue parameters for 5210 here based on queue type (one
+ * queue for normal data and one queue for beacons). For queue setup
+ * on newer chips check out qcu.c. Returns -EINVAL if queue number is out
+ * of range or if queue is already disabled.
+ *
+ * NOTE: Must be called after setting up tx control descriptor for that
+ * queue (see below).
+ */
+int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+ u32 tx_queue;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /* Return if queue is declared inactive */
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return -EIO;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+ /*
+ * Set the queue by type on 5210
+ */
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+ ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+ AR5K_BSR);
+ break;
+ case AR5K_TX_QUEUE_CAB:
+ tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+ ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V |
+ AR5K_BCR_BDMAE, AR5K_BSR);
+ break;
+ default:
+ return -EINVAL;
+ }
+ /* Start queue */
+ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+ ath5k_hw_reg_read(ah, AR5K_CR);
+ } else {
+ /* Return if queue is disabled */
+ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
+ return -EIO;
+
+ /* Start queue */
+ AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue);
+ }
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Stop DMA transmit on a specific hw queue and drain queue so we don't
+ * have any pending frames. Returns -EBUSY if we still have pending frames,
+ * -EINVAL if queue number is out of range.
+ *
+ */
+int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+ unsigned int i = 40;
+ u32 tx_queue, pending;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /* Return if queue is declared inactive */
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return -EIO;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+ /*
+ * Set by queue type
+ */
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ /* XXX Fix me... */
+ tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1;
+ ath5k_hw_reg_write(ah, 0, AR5K_BSR);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Stop queue */
+ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+ ath5k_hw_reg_read(ah, AR5K_CR);
+ } else {
+ /*
+ * Schedule TX disable and wait until queue is empty
+ */
+ AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
+
+ /*Check for pending frames*/
+ do {
+ pending = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_STATUS(queue)) &
+ AR5K_QCU_STS_FRMPENDCNT;
+ udelay(100);
+ } while (--i && pending);
+
+ /* For 2413+ order PCU to drop packets using
+ * QUIET mechanism */
+ if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) &&
+ pending){
+ /* Set periodicity and duration */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)|
+ AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR),
+ AR5K_QUIET_CTL2);
+
+ /* Enable quiet period for current TSF */
+ ath5k_hw_reg_write(ah,
+ AR5K_QUIET_CTL1_QT_EN |
+ AR5K_REG_SM(ath5k_hw_reg_read(ah,
+ AR5K_TSF_L32_5211) >> 10,
+ AR5K_QUIET_CTL1_NEXT_QT_TSF),
+ AR5K_QUIET_CTL1);
+
+ /* Force channel idle high */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_CHANEL_IDLE_HIGH);
+
+ /* Wait a while and disable mechanism */
+ udelay(200);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1,
+ AR5K_QUIET_CTL1_QT_EN);
+
+ /* Re-check for pending frames */
+ i = 40;
+ do {
+ pending = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_STATUS(queue)) &
+ AR5K_QCU_STS_FRMPENDCNT;
+ udelay(100);
+ } while (--i && pending);
+
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_CHANEL_IDLE_HIGH);
+ }
+
+ /* Clear register */
+ ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+ if (pending)
+ return -EBUSY;
+ }
+
+ /* TODO: Check for success on 5210 else return error */
+ return 0;
+}
+
+/**
+ * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Get TX descriptor's address for a specific queue. For 5210 we ignore
+ * the queue number and use tx queue type since we only have 2 queues.
+ * We use TXDP0 for normal data queue and TXDP1 for beacon queue.
+ * For newer chips with QCU/DCU we just read the corresponding TXDP register.
+ *
+ * XXX: Is TXDP read and clear ?
+ */
+u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
+{
+ u16 tx_reg;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /*
+ * Get the transmit queue descriptor pointer from the selected queue
+ */
+ /*5210 doesn't have QCU*/
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_reg = AR5K_NOQCU_TXDP0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ tx_reg = AR5K_NOQCU_TXDP1;
+ break;
+ default:
+ return 0xffffffff;
+ }
+ } else {
+ tx_reg = AR5K_QUEUE_TXDP(queue);
+ }
+
+ return ath5k_hw_reg_read(ah, tx_reg);
+}
+
+/**
+ * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Set TX descriptor's address for a specific queue. For 5210 we ignore
+ * the queue number and we use tx queue type since we only have 2 queues
+ * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue.
+ * For newer chips with QCU/DCU we just set the corresponding TXDP register.
+ * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still
+ * active.
+ */
+int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
+{
+ u16 tx_reg;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /*
+ * Set the transmit queue descriptor pointer register by type
+ * on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_reg = AR5K_NOQCU_TXDP0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ tx_reg = AR5K_NOQCU_TXDP1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ /*
+ * Set the transmit queue descriptor pointer for
+ * the selected queue on QCU for 5211+
+ * (this won't work if the queue is still active)
+ */
+ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+ return -EIO;
+
+ tx_reg = AR5K_QUEUE_TXDP(queue);
+ }
+
+ /* Set descriptor pointer */
+ ath5k_hw_reg_write(ah, phys_addr, tx_reg);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_update_tx_triglevel - Update tx trigger level
+ *
+ * @ah: The &struct ath5k_hw
+ * @increase: Flag to force increase of trigger level
+ *
+ * This function increases/decreases the tx trigger level for the tx fifo
+ * buffer (aka FIFO threshold) that is used to indicate when PCU flushes
+ * the buffer and transmits it's data. Lowering this results sending small
+ * frames more quickly but can lead to tx underruns, raising it a lot can
+ * result other problems (i think bmiss is related). Right now we start with
+ * the lowest possible (64Bytes) and if we get tx underrun we increase it using
+ * the increase flag. Returns -EIO if we have have reached maximum/minimum.
+ *
+ * XXX: Link this with tx DMA size ?
+ * XXX: Use it to save interrupts ?
+ * TODO: Needs testing, i think it's related to bmiss...
+ */
+int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
+{
+ u32 trigger_level, imr;
+ int ret = -EIO;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /*
+ * Disable interrupts by setting the mask
+ */
+ imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL);
+
+ trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG),
+ AR5K_TXCFG_TXFULL);
+
+ if (!increase) {
+ if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES)
+ goto done;
+ } else
+ trigger_level +=
+ ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2);
+
+ /*
+ * Update trigger level on success
+ */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL);
+ else
+ AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_TXFULL, trigger_level);
+
+ ret = 0;
+
+done:
+ /*
+ * Restore interrupt mask
+ */
+ ath5k_hw_set_imr(ah, imr);
+
+ return ret;
+}
+
+/*******************\
+* Interrupt masking *
+\*******************/
+
+/**
+ * ath5k_hw_is_intr_pending - Check if we have pending interrupts
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Check if we have pending interrupts to process. Returns 1 if we
+ * have pending interrupts and 0 if we haven't.
+ */
+bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0;
+}
+
+/**
+ * ath5k_hw_get_isr - Get interrupt status
+ *
+ * @ah: The @struct ath5k_hw
+ * @interrupt_mask: Driver's interrupt mask used to filter out
+ * interrupts in sw.
+ *
+ * This function is used inside our interrupt handler to determine the reason
+ * for the interrupt by reading Primary Interrupt Status Register. Returns an
+ * abstract interrupt status mask which is mostly ISR with some uncommon bits
+ * being mapped on some standard non hw-specific positions
+ * (check out &ath5k_int).
+ *
+ * NOTE: We use read-and-clear register, so after this function is called ISR
+ * is zeroed.
+ *
+ * XXX: Why filter interrupts in sw with interrupt_mask ? No benefit at all
+ * plus it can be misleading (one might thing that we save interrupts this way)
+ */
+int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
+{
+ u32 data;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /*
+ * Read interrupt status from the Interrupt Status register
+ * on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ data = ath5k_hw_reg_read(ah, AR5K_ISR);
+ if (unlikely(data == AR5K_INT_NOCARD)) {
+ *interrupt_mask = data;
+ return -ENODEV;
+ }
+ } else {
+ /*
+ * Read interrupt status from the Read-And-Clear
+ * shadow register.
+ * Note: PISR/SISR Not available on 5210
+ */
+ data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
+ }
+
+ /*
+ * Get abstract interrupt mask (driver-compatible)
+ */
+ *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
+
+ if (unlikely(data == AR5K_INT_NOCARD))
+ return -ENODEV;
+
+ if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR))
+ *interrupt_mask |= AR5K_INT_RX;
+
+ if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR
+ | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL))
+ *interrupt_mask |= AR5K_INT_TX;
+
+ if (ah->ah_version != AR5K_AR5210) {
+ /*HIU = Host Interface Unit (PCI etc)*/
+ if (unlikely(data & (AR5K_ISR_HIUERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ /*Beacon Not Ready*/
+ if (unlikely(data & (AR5K_ISR_BNR)))
+ *interrupt_mask |= AR5K_INT_BNR;
+ }
+
+ /*
+ * XXX: BMISS interrupts may occur after association.
+ * I found this on 5210 code but it needs testing. If this is
+ * true we should disable them before assoc and re-enable them
+ * after a successfull assoc + some jiffies.
+ */
+#if 0
+ interrupt_mask &= ~AR5K_INT_BMISS;
+#endif
+
+ /*
+ * In case we didn't handle anything,
+ * print the register value.
+ */
+ if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
+ ATH5K_PRINTF("0x%08x\n", data);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_imr - Set interrupt mask
+ *
+ * @ah: The &struct ath5k_hw
+ * @new_mask: The new interrupt mask to be set
+ *
+ * Set the interrupt mask in hw to save interrupts. We do that by mapping
+ * ath5k_int bits to hw-specific bits to remove abstraction and writing
+ * Interrupt Mask Register.
+ */
+enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
+{
+ enum ath5k_int old_mask, int_mask;
+
+ /*
+ * Disable card interrupts to prevent any race conditions
+ * (they will be re-enabled afterwards).
+ */
+ ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
+ ath5k_hw_reg_read(ah, AR5K_IER);
+
+ old_mask = ah->ah_imr;
+
+ /*
+ * Add additional, chipset-dependent interrupt mask flags
+ * and write them to the IMR (interrupt mask register).
+ */
+ int_mask = new_mask & AR5K_INT_COMMON;
+
+ if (new_mask & AR5K_INT_RX)
+ int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN |
+ AR5K_IMR_RXDESC;
+
+ if (new_mask & AR5K_INT_TX)
+ int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC |
+ AR5K_IMR_TXURN;
+
+ if (ah->ah_version != AR5K_AR5210) {
+ if (new_mask & AR5K_INT_FATAL) {
+ int_mask |= AR5K_IMR_HIUERR;
+ AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT |
+ AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR);
+ }
+ }
+
+ ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
+
+ /* Store new interrupt mask */
+ ah->ah_imr = new_mask;
+
+ /* ..re-enable interrupts */
+ ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+ ath5k_hw_reg_read(ah, AR5K_IER);
+
+ return old_mask;
+}
+
diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c
new file mode 100644
index 000000000000..a883839b6a9f
--- /dev/null
+++ b/drivers/net/wireless/ath5k/eeprom.c
@@ -0,0 +1,466 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* EEPROM access functions and helpers *
+\*************************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Read from eeprom
+ */
+static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data)
+{
+ u32 status, timeout;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /*
+ * Initialize EEPROM access
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
+ (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
+ } else {
+ ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
+ AR5K_EEPROM_CMD_READ);
+ }
+
+ for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
+ status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
+ if (status & AR5K_EEPROM_STAT_RDDONE) {
+ if (status & AR5K_EEPROM_STAT_RDERR)
+ return -EIO;
+ *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
+ 0xffff);
+ return 0;
+ }
+ udelay(15);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/*
+ * Translate binary channel representation in EEPROM to frequency
+ */
+static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin,
+ unsigned int mode)
+{
+ u16 val;
+
+ if (bin == AR5K_EEPROM_CHANNEL_DIS)
+ return bin;
+
+ if (mode == AR5K_EEPROM_MODE_11A) {
+ if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
+ val = (5 * bin) + 4800;
+ else
+ val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
+ (bin * 10) + 5100;
+ } else {
+ if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
+ val = bin + 2300;
+ else
+ val = bin + 2400;
+ }
+
+ return val;
+}
+
+/*
+ * Read antenna infos from eeprom
+ */
+static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
+ unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 o = *offset;
+ u16 val;
+ int ret, i = 0;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_switch_settling[mode] = (val >> 8) & 0x7f;
+ ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f;
+ ee->ee_ant_control[mode][i] = (val << 4) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf;
+ ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
+ ee->ee_ant_control[mode][i++] = val & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f;
+ ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f;
+ ee->ee_ant_control[mode][i] = (val << 2) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3;
+ ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f;
+ ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f;
+ ee->ee_ant_control[mode][i] = (val << 4) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf;
+ ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
+ ee->ee_ant_control[mode][i++] = val & 0x3f;
+
+ /* Get antenna modes */
+ ah->ah_antenna[mode][0] =
+ (ee->ee_ant_control[mode][0] << 4) | 0x1;
+ ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
+ ee->ee_ant_control[mode][1] |
+ (ee->ee_ant_control[mode][2] << 6) |
+ (ee->ee_ant_control[mode][3] << 12) |
+ (ee->ee_ant_control[mode][4] << 18) |
+ (ee->ee_ant_control[mode][5] << 24);
+ ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
+ ee->ee_ant_control[mode][6] |
+ (ee->ee_ant_control[mode][7] << 6) |
+ (ee->ee_ant_control[mode][8] << 12) |
+ (ee->ee_ant_control[mode][9] << 18) |
+ (ee->ee_ant_control[mode][10] << 24);
+
+ /* return new offset */
+ *offset = o;
+
+ return 0;
+}
+
+/*
+ * Read supported modes from eeprom
+ */
+static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
+ unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 o = *offset;
+ u16 val;
+ int ret;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff;
+ ee->ee_thr_62[mode] = val & 0xff;
+
+ if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+ ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff;
+ ee->ee_tx_frm2xpa_enable[mode] = val & 0xff;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff;
+
+ if ((val & 0xff) & 0x80)
+ ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
+ else
+ ee->ee_noise_floor_thr[mode] = val & 0xff;
+
+ if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+ ee->ee_noise_floor_thr[mode] =
+ mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_xlna_gain[mode] = (val >> 5) & 0xff;
+ ee->ee_x_gain[mode] = (val >> 1) & 0xf;
+ ee->ee_xpd[mode] = val & 0x1;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0)
+ ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) {
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
+
+ if (mode == AR5K_EEPROM_MODE_11A)
+ ee->ee_xr_power[mode] = val & 0x3f;
+ else {
+ ee->ee_ob[mode][0] = val & 0x7;
+ ee->ee_db[mode][0] = (val >> 3) & 0x7;
+ }
+ }
+
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) {
+ ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
+ ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
+ } else {
+ ee->ee_i_gain[mode] = (val >> 13) & 0x7;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_i_gain[mode] |= (val << 3) & 0x38;
+
+ if (mode == AR5K_EEPROM_MODE_11G)
+ ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
+ }
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
+ mode == AR5K_EEPROM_MODE_11A) {
+ ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+ ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+ }
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 &&
+ mode == AR5K_EEPROM_MODE_11G)
+ ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
+
+ /* return new offset */
+ *offset = o;
+
+ return 0;
+}
+
+/*
+ * Initialize eeprom & capabilities structs
+ */
+int ath5k_eeprom_init(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ unsigned int mode, i;
+ int ret;
+ u32 offset;
+ u16 val;
+
+ /* Initial TX thermal adjustment values */
+ ee->ee_tx_clip = 4;
+ ee->ee_pwd_84 = ee->ee_pwd_90 = 1;
+ ee->ee_gain_select = 1;
+
+ /*
+ * Read values from EEPROM and store them in the capability structure
+ */
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header);
+
+ /* Return if we have an old EEPROM */
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
+ return 0;
+
+#ifdef notyet
+ /*
+ * Validate the checksum of the EEPROM date. There are some
+ * devices with invalid EEPROMs.
+ */
+ for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+ AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
+ cksum ^= val;
+ }
+ if (cksum != AR5K_EEPROM_INFO_CKSUM) {
+ ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+ return -EIO;
+ }
+#endif
+
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
+ ee_ant_gain);
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1);
+ }
+
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) {
+ AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
+ ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
+ ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
+
+ AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
+ ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
+ ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
+ }
+
+ /*
+ * Get conformance test limit values
+ */
+ offset = AR5K_EEPROM_CTL(ah->ah_ee_version);
+ ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version);
+
+ for (i = 0; i < ee->ee_ctls; i++) {
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_ctl[i] = (val >> 8) & 0xff;
+ ee->ee_ctl[i + 1] = val & 0xff;
+ }
+
+ /*
+ * Get values for 802.11a (5GHz)
+ */
+ mode = AR5K_EEPROM_MODE_11A;
+
+ ee->ee_turbo_max_power[mode] =
+ AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
+
+ offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version);
+
+ ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+ if (ret)
+ return ret;
+
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff);
+ ee->ee_ob[mode][3] = (val >> 5) & 0x7;
+ ee->ee_db[mode][3] = (val >> 2) & 0x7;
+ ee->ee_ob[mode][2] = (val << 1) & 0x7;
+
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_ob[mode][2] |= (val >> 15) & 0x1;
+ ee->ee_db[mode][2] = (val >> 12) & 0x7;
+ ee->ee_ob[mode][1] = (val >> 9) & 0x7;
+ ee->ee_db[mode][1] = (val >> 6) & 0x7;
+ ee->ee_ob[mode][0] = (val >> 3) & 0x7;
+ ee->ee_db[mode][0] = val & 0x7;
+
+ ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+ if (ret)
+ return ret;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) {
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_margin_tx_rx[mode] = val & 0x3f;
+ }
+
+ /*
+ * Get values for 802.11b (2.4GHz)
+ */
+ mode = AR5K_EEPROM_MODE_11B;
+ offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version);
+
+ ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+ if (ret)
+ return ret;
+
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff);
+ ee->ee_ob[mode][1] = (val >> 4) & 0x7;
+ ee->ee_db[mode][1] = val & 0x7;
+
+ ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+ if (ret)
+ return ret;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_cal_pier[mode][0] =
+ ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+ ee->ee_cal_pier[mode][1] =
+ ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
+
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_cal_pier[mode][2] =
+ ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+ }
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+ ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+ /*
+ * Get values for 802.11g (2.4GHz)
+ */
+ mode = AR5K_EEPROM_MODE_11G;
+ offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version);
+
+ ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+ if (ret)
+ return ret;
+
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff);
+ ee->ee_ob[mode][1] = (val >> 4) & 0x7;
+ ee->ee_db[mode][1] = val & 0x7;
+
+ ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+ if (ret)
+ return ret;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_cal_pier[mode][0] =
+ ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+ ee->ee_cal_pier[mode][1] =
+ ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
+
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_turbo_max_power[mode] = val & 0x7f;
+ ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
+
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_cal_pier[mode][2] =
+ ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+ ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+ ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_cck_ofdm_gain_delta = val & 0xff;
+ }
+ }
+
+ /*
+ * Read 5GHz EEPROM channels
+ */
+
+ return 0;
+}
+
+/*
+ * Read the MAC address from eeprom
+ */
+int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+ u8 mac_d[ETH_ALEN];
+ u32 total, offset;
+ u16 data;
+ int octet, ret;
+
+ memset(mac, 0, ETH_ALEN);
+ memset(mac_d, 0, ETH_ALEN);
+
+ ret = ath5k_hw_eeprom_read(ah, 0x20, &data);
+ if (ret)
+ return ret;
+
+ for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
+ ret = ath5k_hw_eeprom_read(ah, offset, &data);
+ if (ret)
+ return ret;
+
+ total += data;
+ mac_d[octet + 1] = data & 0xff;
+ mac_d[octet] = data >> 8;
+ octet += 2;
+ }
+
+ memcpy(mac, mac_d, ETH_ALEN);
+
+ if (!total || total == 3 * 0xffff)
+ return -EINVAL;
+
+ return 0;
+}
+
diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h
new file mode 100644
index 000000000000..a468ecfbb18a
--- /dev/null
+++ b/drivers/net/wireless/ath5k/eeprom.h
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
+ */
+#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */
+#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */
+#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */
+#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */
+#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */
+
+#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */
+#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */
+#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008
+#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */
+#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020
+#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */
+#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080
+#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */
+#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200
+#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */
+#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800
+#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */
+#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000
+#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */
+#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000
+#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */
+#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */
+#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE)
+#define AR5K_EEPROM_INFO_CKSUM 0xffff
+#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n))
+
+#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */
+#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */
+#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */
+#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */
+#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_3 0x4003
+#define AR5K_EEPROM_VERSION_4_4 0x4004
+#define AR5K_EEPROM_VERSION_4_5 0x4005
+#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */
+#define AR5K_EEPROM_VERSION_4_7 0x4007
+
+#define AR5K_EEPROM_MODE_11A 0
+#define AR5K_EEPROM_MODE_11B 1
+#define AR5K_EEPROM_MODE_11G 2
+
+#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */
+#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
+#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
+#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
+#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */
+#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */
+#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7)
+#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */
+#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */
+
+#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c
+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2
+#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002
+#define AR5K_EEPROM_RFKILL_POLARITY_S 1
+
+/* Newer EEPROMs are using a different offset */
+#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
+ (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
+
+#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
+#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff))
+#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff))
+
+/* calibration settings */
+#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
+#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
+#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
+#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */
+
+/* [3.1 - 3.3] */
+#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec
+#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed
+
+/* Misc values available since EEPROM 4.0 */
+#define AR5K_EEPROM_MISC0 0x00c4
+#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff)
+#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3)
+#define AR5K_EEPROM_MISC1 0x00c5
+#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff)
+#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1)
+
+
+/* Some EEPROM defines */
+#define AR5K_EEPROM_EEP_SCALE 100
+#define AR5K_EEPROM_EEP_DELTA 10
+#define AR5K_EEPROM_N_MODES 3
+#define AR5K_EEPROM_N_5GHZ_CHAN 10
+#define AR5K_EEPROM_N_2GHZ_CHAN 3
+#define AR5K_EEPROM_MAX_CHAN 10
+#define AR5K_EEPROM_N_PCDAC 11
+#define AR5K_EEPROM_N_TEST_FREQ 8
+#define AR5K_EEPROM_N_EDGES 8
+#define AR5K_EEPROM_N_INTERCEPTS 11
+#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
+#define AR5K_EEPROM_PCDAC_M 0x3f
+#define AR5K_EEPROM_PCDAC_START 1
+#define AR5K_EEPROM_PCDAC_STOP 63
+#define AR5K_EEPROM_PCDAC_STEP 1
+#define AR5K_EEPROM_NON_EDGE_M 0x40
+#define AR5K_EEPROM_CHANNEL_POWER 8
+#define AR5K_EEPROM_N_OBDB 4
+#define AR5K_EEPROM_OBDB_DIS 0xffff
+#define AR5K_EEPROM_CHANNEL_DIS 0xff
+#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10)
+#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32)
+#define AR5K_EEPROM_MAX_CTLS 32
+#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4
+#define AR5K_EEPROM_N_XPD0_POINTS 4
+#define AR5K_EEPROM_N_XPD3_POINTS 3
+#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35
+#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55
+#define AR5K_EEPROM_POWER_M 0x3f
+#define AR5K_EEPROM_POWER_MIN 0
+#define AR5K_EEPROM_POWER_MAX 3150
+#define AR5K_EEPROM_POWER_STEP 50
+#define AR5K_EEPROM_POWER_TABLE_SIZE 64
+#define AR5K_EEPROM_N_POWER_LOC_11B 4
+#define AR5K_EEPROM_N_POWER_LOC_11G 6
+#define AR5K_EEPROM_I_GAIN 10
+#define AR5K_EEPROM_CCK_OFDM_DELTA 15
+#define AR5K_EEPROM_N_IQ_CAL 2
+
+#define AR5K_EEPROM_READ(_o, _v) do { \
+ ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \
+ if (ret) \
+ return ret; \
+} while (0)
+
+#define AR5K_EEPROM_READ_HDR(_o, _v) \
+ AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \
+
+/* Struct to hold EEPROM calibration data */
+struct ath5k_eeprom_info {
+ u16 ee_magic;
+ u16 ee_protect;
+ u16 ee_regdomain;
+ u16 ee_version;
+ u16 ee_header;
+ u16 ee_ant_gain;
+ u16 ee_misc0;
+ u16 ee_misc1;
+ u16 ee_cck_ofdm_gain_delta;
+ u16 ee_cck_ofdm_power_delta;
+ u16 ee_scaled_cck_delta;
+
+ /* Used for tx thermal adjustment (eeprom_init, rfregs) */
+ u16 ee_tx_clip;
+ u16 ee_pwd_84;
+ u16 ee_pwd_90;
+ u16 ee_gain_select;
+
+ /* RF Calibration settings (reset, rfregs) */
+ u16 ee_i_cal[AR5K_EEPROM_N_MODES];
+ u16 ee_q_cal[AR5K_EEPROM_N_MODES];
+ u16 ee_fixed_bias[AR5K_EEPROM_N_MODES];
+ u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES];
+ u16 ee_xr_power[AR5K_EEPROM_N_MODES];
+ u16 ee_switch_settling[AR5K_EEPROM_N_MODES];
+ u16 ee_ant_tx_rx[AR5K_EEPROM_N_MODES];
+ u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
+ u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+ u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+ u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
+ u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
+ u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
+ u16 ee_thr_62[AR5K_EEPROM_N_MODES];
+ u16 ee_xlna_gain[AR5K_EEPROM_N_MODES];
+ u16 ee_xpd[AR5K_EEPROM_N_MODES];
+ u16 ee_x_gain[AR5K_EEPROM_N_MODES];
+ u16 ee_i_gain[AR5K_EEPROM_N_MODES];
+ u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
+
+ /* Unused */
+ u16 ee_false_detect[AR5K_EEPROM_N_MODES];
+ u16 ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN];
+ u16 ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/
+
+ /* Conformance test limits (Unused) */
+ u16 ee_ctls;
+ u16 ee_ctl[AR5K_EEPROM_MAX_CTLS];
+
+ /* Noise Floor Calibration settings */
+ s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
+ s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES];
+ s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES];
+};
diff --git a/drivers/net/wireless/ath5k/gpio.c b/drivers/net/wireless/ath5k/gpio.c
new file mode 100644
index 000000000000..b77205adc180
--- /dev/null
+++ b/drivers/net/wireless/ath5k/gpio.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/****************\
+ GPIO Functions
+\****************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Set led state
+ */
+void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
+{
+ u32 led;
+ /*5210 has different led mode handling*/
+ u32 led_5210;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /*Reset led status*/
+ if (ah->ah_version != AR5K_AR5210)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED);
+
+ /*
+ * Some blinking values, define at your wish
+ */
+ switch (state) {
+ case AR5K_LED_SCAN:
+ case AR5K_LED_AUTH:
+ led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
+ led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
+ break;
+
+ case AR5K_LED_INIT:
+ led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
+ led_5210 = AR5K_PCICFG_LED_PEND;
+ break;
+
+ case AR5K_LED_ASSOC:
+ case AR5K_LED_RUN:
+ led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
+ led_5210 = AR5K_PCICFG_LED_ASSOC;
+ break;
+
+ default:
+ led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
+ led_5210 = AR5K_PCICFG_LED_PEND;
+ break;
+ }
+
+ /*Write new status to the register*/
+ if (ah->ah_version != AR5K_AR5210)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led);
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
+}
+
+/*
+ * Set GPIO inputs
+ */
+int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (gpio > AR5K_NUM_GPIO)
+ return -EINVAL;
+
+ ath5k_hw_reg_write(ah,
+ (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio))
+ | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR);
+
+ return 0;
+}
+
+/*
+ * Set GPIO outputs
+ */
+int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (gpio > AR5K_NUM_GPIO)
+ return -EINVAL;
+
+ ath5k_hw_reg_write(ah,
+ (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio))
+ | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR);
+
+ return 0;
+}
+
+/*
+ * Get GPIO state
+ */
+u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (gpio > AR5K_NUM_GPIO)
+ return 0xffffffff;
+
+ /* GPIO input magic */
+ return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) &
+ 0x1;
+}
+
+/*
+ * Set GPIO state
+ */
+int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
+{
+ u32 data;
+ ATH5K_TRACE(ah->ah_sc);
+
+ if (gpio > AR5K_NUM_GPIO)
+ return -EINVAL;
+
+ /* GPIO output magic */
+ data = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+ data &= ~(1 << gpio);
+ data |= (val & 1) << gpio;
+
+ ath5k_hw_reg_write(ah, data, AR5K_GPIODO);
+
+ return 0;
+}
+
+/*
+ * Initialize the GPIO interrupt (RFKill switch)
+ */
+void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
+ u32 interrupt_level)
+{
+ u32 data;
+
+ ATH5K_TRACE(ah->ah_sc);
+ if (gpio > AR5K_NUM_GPIO)
+ return;
+
+ /*
+ * Set the GPIO interrupt
+ */
+ data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &
+ ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH |
+ AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) |
+ (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA);
+
+ ath5k_hw_reg_write(ah, interrupt_level ? data :
+ (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR);
+
+ ah->ah_imr |= AR5K_IMR_GPIO;
+
+ /* Enable GPIO interrupts */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO);
+}
+
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
deleted file mode 100644
index ad1a5b422c8c..000000000000
--- a/drivers/net/wireless/ath5k/hw.c
+++ /dev/null
@@ -1,4529 +0,0 @@
-/*
- * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org>
- * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
- * Copyright (c) 2007 Pavel Roskin <proski@gnu.org>
- * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-/*
- * HW related functions for Atheros Wireless LAN devices.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "reg.h"
-#include "base.h"
-#include "debug.h"
-
-/* Rate tables */
-static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A;
-static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B;
-static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G;
-static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO;
-static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR;
-
-/* Prototypes */
-static int ath5k_hw_nic_reset(struct ath5k_hw *, u32);
-static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool);
-static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
- unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
- unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
- unsigned int, unsigned int);
-static int ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
- unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
- unsigned int);
-static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *, struct ath5k_desc *,
- struct ath5k_tx_status *);
-static int ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
- unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
- unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
- unsigned int, unsigned int);
-static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *, struct ath5k_desc *,
- struct ath5k_tx_status *);
-static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *, struct ath5k_desc *,
- struct ath5k_rx_status *);
-static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *, struct ath5k_desc *,
- struct ath5k_rx_status *);
-static int ath5k_hw_get_capabilities(struct ath5k_hw *);
-
-static int ath5k_eeprom_init(struct ath5k_hw *);
-static int ath5k_eeprom_read_mac(struct ath5k_hw *, u8 *);
-
-static int ath5k_hw_enable_pspoll(struct ath5k_hw *, u8 *, u16);
-static int ath5k_hw_disable_pspoll(struct ath5k_hw *);
-
-/*
- * Enable to overwrite the country code (use "00" for debug)
- */
-#if 0
-#define COUNTRYCODE "00"
-#endif
-
-/*******************\
- General Functions
-\*******************/
-
-/*
- * Functions used internaly
- */
-
-static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
-{
- return turbo ? (usec * 80) : (usec * 40);
-}
-
-static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
-{
- return turbo ? (clock / 80) : (clock / 40);
-}
-
-/*
- * Check if a register write has been completed
- */
-int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
- bool is_set)
-{
- int i;
- u32 data;
-
- for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
- data = ath5k_hw_reg_read(ah, reg);
- if (is_set && (data & flag))
- break;
- else if ((data & flag) == val)
- break;
- udelay(15);
- }
-
- return (i <= 0) ? -EAGAIN : 0;
-}
-
-
-/***************************************\
- Attach/Detach Functions
-\***************************************/
-
-/*
- * Power On Self Test helper function
- */
-static int ath5k_hw_post(struct ath5k_hw *ah)
-{
-
- int i, c;
- u16 cur_reg;
- u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)};
- u32 var_pattern;
- u32 static_pattern[4] = {
- 0x55555555, 0xaaaaaaaa,
- 0x66666666, 0x99999999
- };
- u32 init_val;
- u32 cur_val;
-
- for (c = 0; c < 2; c++) {
-
- cur_reg = regs[c];
-
- /* Save previous value */
- init_val = ath5k_hw_reg_read(ah, cur_reg);
-
- for (i = 0; i < 256; i++) {
- var_pattern = i << 16 | i;
- ath5k_hw_reg_write(ah, var_pattern, cur_reg);
- cur_val = ath5k_hw_reg_read(ah, cur_reg);
-
- if (cur_val != var_pattern) {
- ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
- return -EAGAIN;
- }
-
- /* Found on ndiswrapper dumps */
- var_pattern = 0x0039080f;
- ath5k_hw_reg_write(ah, var_pattern, cur_reg);
- }
-
- for (i = 0; i < 4; i++) {
- var_pattern = static_pattern[i];
- ath5k_hw_reg_write(ah, var_pattern, cur_reg);
- cur_val = ath5k_hw_reg_read(ah, cur_reg);
-
- if (cur_val != var_pattern) {
- ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
- return -EAGAIN;
- }
-
- /* Found on ndiswrapper dumps */
- var_pattern = 0x003b080f;
- ath5k_hw_reg_write(ah, var_pattern, cur_reg);
- }
-
- /* Restore previous value */
- ath5k_hw_reg_write(ah, init_val, cur_reg);
-
- }
-
- return 0;
-
-}
-
-/*
- * Check if the device is supported and initialize the needed structs
- */
-struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
-{
- struct ath5k_hw *ah;
- struct pci_dev *pdev = sc->pdev;
- u8 mac[ETH_ALEN];
- int ret;
- u32 srev;
-
- /*If we passed the test malloc a ath5k_hw struct*/
- ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
- if (ah == NULL) {
- ret = -ENOMEM;
- ATH5K_ERR(sc, "out of memory\n");
- goto err;
- }
-
- ah->ah_sc = sc;
- ah->ah_iobase = sc->iobase;
-
- /*
- * HW information
- */
-
- ah->ah_op_mode = IEEE80211_IF_TYPE_STA;
- ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT;
- ah->ah_turbo = false;
- ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
- ah->ah_imr = 0;
- ah->ah_atim_window = 0;
- ah->ah_aifs = AR5K_TUNE_AIFS;
- ah->ah_cw_min = AR5K_TUNE_CWMIN;
- ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
- ah->ah_software_retry = false;
- ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
-
- /*
- * Set the mac revision based on the pci id
- */
- ah->ah_version = mac_version;
-
- /*Fill the ath5k_hw struct with the needed functions*/
- if (ah->ah_version == AR5K_AR5212)
- ah->ah_magic = AR5K_EEPROM_MAGIC_5212;
- else if (ah->ah_version == AR5K_AR5211)
- ah->ah_magic = AR5K_EEPROM_MAGIC_5211;
-
- if (ah->ah_version == AR5K_AR5212) {
- ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc;
- ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc;
- ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status;
- } else {
- ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc;
- ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc;
- ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status;
- }
-
- if (ah->ah_version == AR5K_AR5212)
- ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status;
- else if (ah->ah_version <= AR5K_AR5211)
- ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status;
-
- /* Bring device out of sleep and reset it's units */
- ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true);
- if (ret)
- goto err_free;
-
- /* Get MAC, PHY and RADIO revisions */
- srev = ath5k_hw_reg_read(ah, AR5K_SREV);
- ah->ah_mac_srev = srev;
- ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
- ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
- ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) &
- 0xffffffff;
- ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
- CHANNEL_5GHZ);
-
- if (ah->ah_version == AR5K_AR5210)
- ah->ah_radio_2ghz_revision = 0;
- else
- ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
- CHANNEL_2GHZ);
-
- /* Return on unsuported chips (unsupported eeprom etc) */
- if ((srev >= AR5K_SREV_VER_AR5416) &&
- (srev < AR5K_SREV_VER_AR2425)) {
- ATH5K_ERR(sc, "Device not yet supported.\n");
- ret = -ENODEV;
- goto err_free;
- } else if (srev == AR5K_SREV_VER_AR2425) {
- ATH5K_WARN(sc, "Support for RF2425 is under development.\n");
- }
-
- /* Identify single chip solutions */
- if (((srev <= AR5K_SREV_VER_AR5414) &&
- (srev >= AR5K_SREV_VER_AR2413)) ||
- (srev == AR5K_SREV_VER_AR2425)) {
- ah->ah_single_chip = true;
- } else {
- ah->ah_single_chip = false;
- }
-
- /* Single chip radio */
- if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision)
- ah->ah_radio_2ghz_revision = 0;
-
- /* Identify the radio chip*/
- if (ah->ah_version == AR5K_AR5210) {
- ah->ah_radio = AR5K_RF5110;
- /*
- * Register returns 0x0/0x04 for radio revision
- * so ath5k_hw_radio_revision doesn't parse the value
- * correctly. For now we are based on mac's srev to
- * identify RF2425 radio.
- */
- } else if (srev == AR5K_SREV_VER_AR2425) {
- ah->ah_radio = AR5K_RF2425;
- ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
- } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) {
- ah->ah_radio = AR5K_RF5111;
- ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
- } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) {
- ah->ah_radio = AR5K_RF5112;
- ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
- } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) {
- ah->ah_radio = AR5K_RF2413;
- ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
- } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) {
- ah->ah_radio = AR5K_RF5413;
- ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
- } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) {
- /* AR5424 */
- if (srev >= AR5K_SREV_VER_AR5424) {
- ah->ah_radio = AR5K_RF5413;
- ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
- /* AR2424 */
- } else {
- ah->ah_radio = AR5K_RF2413; /* For testing */
- ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
- }
- }
- ah->ah_phy = AR5K_PHY(0);
-
- /*
- * Write PCI-E power save settings
- */
- if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
- ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080);
- ath5k_hw_reg_write(ah, 0x24924924, 0x4080);
- ath5k_hw_reg_write(ah, 0x28000039, 0x4080);
- ath5k_hw_reg_write(ah, 0x53160824, 0x4080);
- ath5k_hw_reg_write(ah, 0xe5980579, 0x4080);
- ath5k_hw_reg_write(ah, 0x001defff, 0x4080);
- ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080);
- ath5k_hw_reg_write(ah, 0xbe105554, 0x4080);
- ath5k_hw_reg_write(ah, 0x000e3007, 0x4080);
- ath5k_hw_reg_write(ah, 0x00000000, 0x4084);
- }
-
- /*
- * POST
- */
- ret = ath5k_hw_post(ah);
- if (ret)
- goto err_free;
-
- /* Write AR5K_PCICFG_UNK on 2112B and later chips */
- if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B ||
- srev > AR5K_SREV_VER_AR2413) {
- ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG);
- }
-
- /*
- * Get card capabilities, values, ...
- */
- ret = ath5k_eeprom_init(ah);
- if (ret) {
- ATH5K_ERR(sc, "unable to init EEPROM\n");
- goto err_free;
- }
-
- /* Get misc capabilities */
- ret = ath5k_hw_get_capabilities(ah);
- if (ret) {
- ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
- sc->pdev->device);
- goto err_free;
- }
-
- /* Get MAC address */
- ret = ath5k_eeprom_read_mac(ah, mac);
- if (ret) {
- ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
- sc->pdev->device);
- goto err_free;
- }
-
- ath5k_hw_set_lladdr(ah, mac);
- /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
- memset(ah->ah_bssid, 0xff, ETH_ALEN);
- ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
- ath5k_hw_set_opmode(ah);
-
- ath5k_hw_set_rfgain_opt(ah);
-
- return ah;
-err_free:
- kfree(ah);
-err:
- return ERR_PTR(ret);
-}
-
-/*
- * Bring up MAC + PHY Chips
- */
-static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
-{
- struct pci_dev *pdev = ah->ah_sc->pdev;
- u32 turbo, mode, clock, bus_flags;
- int ret;
-
- turbo = 0;
- mode = 0;
- clock = 0;
-
- ATH5K_TRACE(ah->ah_sc);
-
- /* Wakeup the device */
- ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
- if (ret) {
- ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
- return ret;
- }
-
- if (ah->ah_version != AR5K_AR5210) {
- /*
- * Get channel mode flags
- */
-
- if (ah->ah_radio >= AR5K_RF5112) {
- mode = AR5K_PHY_MODE_RAD_RF5112;
- clock = AR5K_PHY_PLL_RF5112;
- } else {
- mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/
- clock = AR5K_PHY_PLL_RF5111; /*Zero*/
- }
-
- if (flags & CHANNEL_2GHZ) {
- mode |= AR5K_PHY_MODE_FREQ_2GHZ;
- clock |= AR5K_PHY_PLL_44MHZ;
-
- if (flags & CHANNEL_CCK) {
- mode |= AR5K_PHY_MODE_MOD_CCK;
- } else if (flags & CHANNEL_OFDM) {
- /* XXX Dynamic OFDM/CCK is not supported by the
- * AR5211 so we set MOD_OFDM for plain g (no
- * CCK headers) operation. We need to test
- * this, 5211 might support ofdm-only g after
- * all, there are also initial register values
- * in the code for g mode (see initvals.c). */
- if (ah->ah_version == AR5K_AR5211)
- mode |= AR5K_PHY_MODE_MOD_OFDM;
- else
- mode |= AR5K_PHY_MODE_MOD_DYN;
- } else {
- ATH5K_ERR(ah->ah_sc,
- "invalid radio modulation mode\n");
- return -EINVAL;
- }
- } else if (flags & CHANNEL_5GHZ) {
- mode |= AR5K_PHY_MODE_FREQ_5GHZ;
- clock |= AR5K_PHY_PLL_40MHZ;
-
- if (flags & CHANNEL_OFDM)
- mode |= AR5K_PHY_MODE_MOD_OFDM;
- else {
- ATH5K_ERR(ah->ah_sc,
- "invalid radio modulation mode\n");
- return -EINVAL;
- }
- } else {
- ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
- return -EINVAL;
- }
-
- if (flags & CHANNEL_TURBO)
- turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
- } else { /* Reset the device */
-
- /* ...enable Atheros turbo mode if requested */
- if (flags & CHANNEL_TURBO)
- ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
- AR5K_PHY_TURBO);
- }
-
- /* reseting PCI on PCI-E cards results card to hang
- * and always return 0xffff... so we ingore that flag
- * for PCI-E cards */
- bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
-
- /* Reset chipset */
- ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
- AR5K_RESET_CTL_BASEBAND | bus_flags);
- if (ret) {
- ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
- return -EIO;
- }
-
- if (ah->ah_version == AR5K_AR5210)
- udelay(2300);
-
- /* ...wakeup again!*/
- ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
- if (ret) {
- ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
- return ret;
- }
-
- /* ...final warm reset */
- if (ath5k_hw_nic_reset(ah, 0)) {
- ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
- return -EIO;
- }
-
- if (ah->ah_version != AR5K_AR5210) {
- /* ...set the PHY operating mode */
- ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
- udelay(300);
-
- ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
- ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
- }
-
- return 0;
-}
-
-/*
- * Get the rate table for a specific operation mode
- */
-const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah,
- unsigned int mode)
-{
- ATH5K_TRACE(ah->ah_sc);
-
- if (!test_bit(mode, ah->ah_capabilities.cap_mode))
- return NULL;
-
- /* Get rate tables */
- switch (mode) {
- case AR5K_MODE_11A:
- return &ath5k_rt_11a;
- case AR5K_MODE_11A_TURBO:
- return &ath5k_rt_turbo;
- case AR5K_MODE_11B:
- return &ath5k_rt_11b;
- case AR5K_MODE_11G:
- return &ath5k_rt_11g;
- case AR5K_MODE_11G_TURBO:
- return &ath5k_rt_xr;
- }
-
- return NULL;
-}
-
-/*
- * Free the ath5k_hw struct
- */
-void ath5k_hw_detach(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
-
- __set_bit(ATH_STAT_INVALID, ah->ah_sc->status);
-
- if (ah->ah_rf_banks != NULL)
- kfree(ah->ah_rf_banks);
-
- /* assume interrupts are down */
- kfree(ah);
-}
-
-/****************************\
- Reset function and helpers
-\****************************/
-
-/**
- * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
- *
- * @ah: the &struct ath5k_hw
- * @channel: the currently set channel upon reset
- *
- * Write the OFDM timings for the AR5212 upon reset. This is a helper for
- * ath5k_hw_reset(). This seems to tune the PLL a specified frequency
- * depending on the bandwidth of the channel.
- *
- */
-static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
- struct ieee80211_channel *channel)
-{
- /* Get exponent and mantissa and set it */
- u32 coef_scaled, coef_exp, coef_man,
- ds_coef_exp, ds_coef_man, clock;
-
- if (!(ah->ah_version == AR5K_AR5212) ||
- !(channel->hw_value & CHANNEL_OFDM))
- BUG();
-
- /* Seems there are two PLLs, one for baseband sampling and one
- * for tuning. Tuning basebands are 40 MHz or 80MHz when in
- * turbo. */
- clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40;
- coef_scaled = ((5 * (clock << 24)) / 2) /
- channel->center_freq;
-
- for (coef_exp = 31; coef_exp > 0; coef_exp--)
- if ((coef_scaled >> coef_exp) & 0x1)
- break;
-
- if (!coef_exp)
- return -EINVAL;
-
- coef_exp = 14 - (coef_exp - 24);
- coef_man = coef_scaled +
- (1 << (24 - coef_exp - 1));
- ds_coef_man = coef_man >> (24 - coef_exp);
- ds_coef_exp = coef_exp - 16;
-
- AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
- AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
- AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
- AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
-
- return 0;
-}
-
-/**
- * ath5k_hw_write_rate_duration - set rate duration during hw resets
- *
- * @ah: the &struct ath5k_hw
- * @mode: one of enum ath5k_driver_mode
- *
- * Write the rate duration table for the current mode upon hw reset. This
- * is a helper for ath5k_hw_reset(). It seems all this is doing is setting
- * an ACK timeout for the hardware for the current mode for each rate. The
- * rates which are capable of short preamble (802.11b rates 2Mbps, 5.5Mbps,
- * and 11Mbps) have another register for the short preamble ACK timeout
- * calculation.
- *
- */
-static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
- unsigned int mode)
-{
- struct ath5k_softc *sc = ah->ah_sc;
- const struct ath5k_rate_table *rt;
- struct ieee80211_rate srate = {};
- unsigned int i;
-
- /* Get rate table for the current operating mode */
- rt = ath5k_hw_get_rate_table(ah, mode);
-
- /* Write rate duration table */
- for (i = 0; i < rt->rate_count; i++) {
- const struct ath5k_rate *rate, *control_rate;
-
- u32 reg;
- u16 tx_time;
-
- rate = &rt->rates[i];
- control_rate = &rt->rates[rate->control_rate];
-
- /* Set ACK timeout */
- reg = AR5K_RATE_DUR(rate->rate_code);
-
- srate.bitrate = control_rate->rate_kbps/100;
-
- /* An ACK frame consists of 10 bytes. If you add the FCS,
- * which ieee80211_generic_frame_duration() adds,
- * its 14 bytes. Note we use the control rate and not the
- * actual rate for this rate. See mac80211 tx.c
- * ieee80211_duration() for a brief description of
- * what rate we should choose to TX ACKs. */
- tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
- sc->vif, 10, &srate));
-
- ath5k_hw_reg_write(ah, tx_time, reg);
-
- if (!HAS_SHPREAMBLE(i))
- continue;
-
- /*
- * We're not distinguishing short preamble here,
- * This is true, all we'll get is a longer value here
- * which is not necessarilly bad. We could use
- * export ieee80211_frame_duration() but that needs to be
- * fixed first to be properly used by mac802111 drivers:
- *
- * - remove erp stuff and let the routine figure ofdm
- * erp rates
- * - remove passing argument ieee80211_local as
- * drivers don't have access to it
- * - move drivers using ieee80211_generic_frame_duration()
- * to this
- */
- ath5k_hw_reg_write(ah, tx_time,
- reg + (AR5K_SET_SHORT_PREAMBLE << 2));
- }
-}
-
-/*
- * Main reset function
- */
-int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
- struct ieee80211_channel *channel, bool change_channel)
-{
- struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
- struct pci_dev *pdev = ah->ah_sc->pdev;
- u32 data, s_seq, s_ant, s_led[3], dma_size;
- unsigned int i, mode, freq, ee_mode, ant[2];
- int ret;
-
- ATH5K_TRACE(ah->ah_sc);
-
- s_seq = 0;
- s_ant = 0;
- ee_mode = 0;
- freq = 0;
- mode = 0;
-
- /*
- * Save some registers before a reset
- */
- /*DCU/Antenna selection not available on 5210*/
- if (ah->ah_version != AR5K_AR5210) {
- if (change_channel) {
- /* Seq number for queue 0 -do this for all queues ? */
- s_seq = ath5k_hw_reg_read(ah,
- AR5K_QUEUE_DFS_SEQNUM(0));
- /*Default antenna*/
- s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
- }
- }
-
- /*GPIOs*/
- s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE;
- s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
- s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
-
- if (change_channel && ah->ah_rf_banks != NULL)
- ath5k_hw_get_rf_gain(ah);
-
-
- /*Wakeup the device*/
- ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
- if (ret)
- return ret;
-
- /*
- * Initialize operating mode
- */
- ah->ah_op_mode = op_mode;
-
- /*
- * 5111/5112 Settings
- * 5210 only comes with RF5110
- */
- if (ah->ah_version != AR5K_AR5210) {
- if (ah->ah_radio != AR5K_RF5111 &&
- ah->ah_radio != AR5K_RF5112 &&
- ah->ah_radio != AR5K_RF5413 &&
- ah->ah_radio != AR5K_RF2413 &&
- ah->ah_radio != AR5K_RF2425) {
- ATH5K_ERR(ah->ah_sc,
- "invalid phy radio: %u\n", ah->ah_radio);
- return -EINVAL;
- }
-
- switch (channel->hw_value & CHANNEL_MODES) {
- case CHANNEL_A:
- mode = AR5K_MODE_11A;
- freq = AR5K_INI_RFGAIN_5GHZ;
- ee_mode = AR5K_EEPROM_MODE_11A;
- break;
- case CHANNEL_G:
- mode = AR5K_MODE_11G;
- freq = AR5K_INI_RFGAIN_2GHZ;
- ee_mode = AR5K_EEPROM_MODE_11G;
- break;
- case CHANNEL_B:
- mode = AR5K_MODE_11B;
- freq = AR5K_INI_RFGAIN_2GHZ;
- ee_mode = AR5K_EEPROM_MODE_11B;
- break;
- case CHANNEL_T:
- mode = AR5K_MODE_11A_TURBO;
- freq = AR5K_INI_RFGAIN_5GHZ;
- ee_mode = AR5K_EEPROM_MODE_11A;
- break;
- /*Is this ok on 5211 too ?*/
- case CHANNEL_TG:
- mode = AR5K_MODE_11G_TURBO;
- freq = AR5K_INI_RFGAIN_2GHZ;
- ee_mode = AR5K_EEPROM_MODE_11G;
- break;
- case CHANNEL_XR:
- if (ah->ah_version == AR5K_AR5211) {
- ATH5K_ERR(ah->ah_sc,
- "XR mode not available on 5211");
- return -EINVAL;
- }
- mode = AR5K_MODE_XR;
- freq = AR5K_INI_RFGAIN_5GHZ;
- ee_mode = AR5K_EEPROM_MODE_11A;
- break;
- default:
- ATH5K_ERR(ah->ah_sc,
- "invalid channel: %d\n", channel->center_freq);
- return -EINVAL;
- }
-
- /* PHY access enable */
- ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
-
- }
-
- ret = ath5k_hw_write_initvals(ah, mode, change_channel);
- if (ret)
- return ret;
-
- /*
- * 5211/5212 Specific
- */
- if (ah->ah_version != AR5K_AR5210) {
- /*
- * Write initial RF gain settings
- * This should work for both 5111/5112
- */
- ret = ath5k_hw_rfgain(ah, freq);
- if (ret)
- return ret;
-
- mdelay(1);
-
- /*
- * Write some more initial register settings
- */
- if (ah->ah_version == AR5K_AR5212) {
- ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
-
- if (channel->hw_value == CHANNEL_G)
- if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413)
- ath5k_hw_reg_write(ah, 0x00f80d80,
- 0x994c);
- else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424)
- ath5k_hw_reg_write(ah, 0x00380140,
- 0x994c);
- else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425)
- ath5k_hw_reg_write(ah, 0x00fc0ec0,
- 0x994c);
- else /* 2425 */
- ath5k_hw_reg_write(ah, 0x00fc0fc0,
- 0x994c);
- else
- ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
-
- /* Some bits are disabled here, we know nothing about
- * register 0xa228 yet, most of the times this ends up
- * with a value 0x9b5 -haven't seen any dump with
- * a different value- */
- /* Got this from decompiling binary HAL */
- data = ath5k_hw_reg_read(ah, 0xa228);
- data &= 0xfffffdff;
- ath5k_hw_reg_write(ah, data, 0xa228);
-
- data = ath5k_hw_reg_read(ah, 0xa228);
- data &= 0xfffe03ff;
- ath5k_hw_reg_write(ah, data, 0xa228);
- data = 0;
-
- /* Just write 0x9b5 ? */
- /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
- ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
- ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
- ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
- }
-
- /* Fix for first revision of the RF5112 RF chipset */
- if (ah->ah_radio >= AR5K_RF5112 &&
- ah->ah_radio_5ghz_revision <
- AR5K_SREV_RAD_5112A) {
- ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
- AR5K_PHY_CCKTXCTL);
- if (channel->hw_value & CHANNEL_5GHZ)
- data = 0xffb81020;
- else
- data = 0xffb80d20;
- ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
- data = 0;
- }
-
- /*
- * Set TX power (FIXME)
- */
- ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER);
- if (ret)
- return ret;
-
- /* Write rate duration table only on AR5212 and if
- * virtual interface has already been brought up
- * XXX: rethink this after new mode changes to
- * mac80211 are integrated */
- if (ah->ah_version == AR5K_AR5212 &&
- ah->ah_sc->vif != NULL)
- ath5k_hw_write_rate_duration(ah, mode);
-
- /*
- * Write RF registers
- */
- ret = ath5k_hw_rfregs(ah, channel, mode);
- if (ret)
- return ret;
-
- /*
- * Configure additional registers
- */
-
- /* Write OFDM timings on 5212*/
- if (ah->ah_version == AR5K_AR5212 &&
- channel->hw_value & CHANNEL_OFDM) {
- ret = ath5k_hw_write_ofdm_timings(ah, channel);
- if (ret)
- return ret;
- }
-
- /*Enable/disable 802.11b mode on 5111
- (enable 2111 frequency converter + CCK)*/
- if (ah->ah_radio == AR5K_RF5111) {
- if (mode == AR5K_MODE_11B)
- AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
- AR5K_TXCFG_B_MODE);
- else
- AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
- AR5K_TXCFG_B_MODE);
- }
-
- /*
- * Set channel and calibrate the PHY
- */
- ret = ath5k_hw_channel(ah, channel);
- if (ret)
- return ret;
-
- /* Set antenna mode */
- AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL,
- ah->ah_antenna[ee_mode][0], 0xfffffc06);
-
- /*
- * In case a fixed antenna was set as default
- * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
- * registers.
- */
- if (s_ant != 0){
- if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
- ant[0] = ant[1] = AR5K_ANT_FIXED_A;
- else /* 2 - Aux */
- ant[0] = ant[1] = AR5K_ANT_FIXED_B;
- } else {
- ant[0] = AR5K_ANT_FIXED_A;
- ant[1] = AR5K_ANT_FIXED_B;
- }
-
- ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
- AR5K_PHY_ANT_SWITCH_TABLE_0);
- ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
- AR5K_PHY_ANT_SWITCH_TABLE_1);
-
- /* Commit values from EEPROM */
- if (ah->ah_radio == AR5K_RF5111)
- AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
- AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip);
-
- ath5k_hw_reg_write(ah,
- AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
- AR5K_PHY_NFTHRES);
-
- AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING,
- (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
- 0xffffc07f);
- AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN,
- (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000,
- 0xfffc0fff);
- AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE,
- (ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
- ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
- 0xffff0000);
-
- ath5k_hw_reg_write(ah,
- (ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
- (ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
- (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
- (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
-
- AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3,
- ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
- AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF,
- (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
- AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01);
-
- AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
- AR5K_PHY_IQ_CORR_ENABLE |
- (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
- ee->ee_q_cal[ee_mode]);
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
- AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
- AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
- ee->ee_margin_tx_rx[ee_mode]);
-
- } else {
- mdelay(1);
- /* Disable phy and wait */
- ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
- mdelay(1);
- }
-
- /*
- * Restore saved values
- */
- /*DCU/Antenna selection not available on 5210*/
- if (ah->ah_version != AR5K_AR5210) {
- ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0));
- ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
- }
- AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
- ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
- ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
-
- /*
- * Misc
- */
- /* XXX: add ah->aid once mac80211 gives this to us */
- ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
-
- ath5k_hw_set_opmode(ah);
- /*PISR/SISR Not available on 5210*/
- if (ah->ah_version != AR5K_AR5210) {
- ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
- /* If we later allow tuning for this, store into sc structure */
- data = AR5K_TUNE_RSSI_THRES |
- AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S;
- ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR);
- }
-
- /*
- * Set Rx/Tx DMA Configuration
- *
- * Set maximum DMA size (512) except for PCI-E cards since
- * it causes rx overruns and tx errors (tested on 5424 but since
- * rx overruns also occur on 5416/5418 with madwifi we set 128
- * for all PCI-E cards to be safe).
- *
- * In dumps this is 128 for allchips.
- *
- * XXX: need to check 5210 for this
- * TODO: Check out tx triger level, it's always 64 on dumps but I
- * guess we can tweak it and see how it goes ;-)
- */
- dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B;
- if (ah->ah_version != AR5K_AR5210) {
- AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
- AR5K_TXCFG_SDMAMR, dma_size);
- AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
- AR5K_RXCFG_SDMAMW, dma_size);
- }
-
- /*
- * Enable the PHY and wait until completion
- */
- ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
-
- /*
- * On 5211+ read activation -> rx delay
- * and use it.
- */
- if (ah->ah_version != AR5K_AR5210) {
- data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
- AR5K_PHY_RX_DELAY_M;
- data = (channel->hw_value & CHANNEL_CCK) ?
- ((data << 2) / 22) : (data / 10);
-
- udelay(100 + (2 * data));
- data = 0;
- } else {
- mdelay(1);
- }
-
- /*
- * Perform ADC test (?)
- */
- data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
- ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
- for (i = 0; i <= 20; i++) {
- if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
- break;
- udelay(200);
- }
- ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1);
- data = 0;
-
- /*
- * Start automatic gain calibration
- *
- * During AGC calibration RX path is re-routed to
- * a signal detector so we don't receive anything.
- *
- * This method is used to calibrate some static offsets
- * used together with on-the fly I/Q calibration (the
- * one performed via ath5k_hw_phy_calibrate), that doesn't
- * interrupt rx path.
- *
- * If we are in a noisy environment AGC calibration may time
- * out.
- */
- AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
- AR5K_PHY_AGCCTL_CAL);
-
- /* At the same time start I/Q calibration for QAM constellation
- * -no need for CCK- */
- ah->ah_calibration = false;
- if (!(mode == AR5K_MODE_11B)) {
- ah->ah_calibration = true;
- AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
- AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
- AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
- AR5K_PHY_IQ_RUN);
- }
-
- /* Wait for gain calibration to finish (we check for I/Q calibration
- * during ath5k_phy_calibrate) */
- if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
- AR5K_PHY_AGCCTL_CAL, 0, false)) {
- ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
- channel->center_freq);
- return -EAGAIN;
- }
-
- /*
- * Start noise floor calibration
- *
- * If we run NF calibration before AGC, it always times out.
- * Binary HAL starts NF and AGC calibration at the same time
- * and only waits for AGC to finish. I believe that's wrong because
- * during NF calibration, rx path is also routed to a detector, so if
- * it doesn't finish we won't have RX.
- *
- * XXX: Find an interval that's OK for all cards...
- */
- ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
- if (ret)
- return ret;
-
- /*
- * Reset queues and start beacon timers at the end of the reset routine
- */
- for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
- /*No QCU on 5210*/
- if (ah->ah_version != AR5K_AR5210)
- AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i);
-
- ret = ath5k_hw_reset_tx_queue(ah, i);
- if (ret) {
- ATH5K_ERR(ah->ah_sc,
- "failed to reset TX queue #%d\n", i);
- return ret;
- }
- }
-
- /* Pre-enable interrupts on 5211/5212*/
- if (ah->ah_version != AR5K_AR5210)
- ath5k_hw_set_intr(ah, AR5K_INT_RX | AR5K_INT_TX |
- AR5K_INT_FATAL);
-
- /*
- * Set RF kill flags if supported by the device (read from the EEPROM)
- * Disable gpio_intr for now since it results system hang.
- * TODO: Handle this in ath5k_intr
- */
-#if 0
- if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
- ath5k_hw_set_gpio_input(ah, 0);
- ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
- if (ah->ah_gpio[0] == 0)
- ath5k_hw_set_gpio_intr(ah, 0, 1);
- else
- ath5k_hw_set_gpio_intr(ah, 0, 0);
- }
-#endif
-
- /*
- * Set the 32MHz reference clock on 5212 phy clock sleep register
- *
- * TODO: Find out how to switch to external 32Khz clock to save power
- */
- if (ah->ah_version == AR5K_AR5212) {
- ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR);
- ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
- ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL);
- ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
- ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
- ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
-
- data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
- data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
- 0x00000f80 : 0x00001380 ;
- ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
- data = 0;
- }
-
- if (ah->ah_version == AR5K_AR5212) {
- ath5k_hw_reg_write(ah, 0x000100aa, 0x8118);
- ath5k_hw_reg_write(ah, 0x00003210, 0x811c);
- ath5k_hw_reg_write(ah, 0x00000052, 0x8108);
- if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413)
- ath5k_hw_reg_write(ah, 0x00000004, 0x8120);
- }
-
- /*
- * Disable beacons and reset the register
- */
- AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
- AR5K_BEACON_RESET_TSF);
-
- return 0;
-}
-
-/*
- * Reset chipset
- */
-static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
-{
- int ret;
- u32 mask = val ? val : ~0U;
-
- ATH5K_TRACE(ah->ah_sc);
-
- /* Read-and-clear RX Descriptor Pointer*/
- ath5k_hw_reg_read(ah, AR5K_RXDP);
-
- /*
- * Reset the device and wait until success
- */
- ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
-
- /* Wait at least 128 PCI clocks */
- udelay(15);
-
- if (ah->ah_version == AR5K_AR5210) {
- val &= AR5K_RESET_CTL_CHIP;
- mask &= AR5K_RESET_CTL_CHIP;
- } else {
- val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
- mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
- }
-
- ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
-
- /*
- * Reset configuration register (for hw byte-swap). Note that this
- * is only set for big endian. We do the necessary magic in
- * AR5K_INIT_CFG.
- */
- if ((val & AR5K_RESET_CTL_PCU) == 0)
- ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
-
- return ret;
-}
-
-/*
- * Power management functions
- */
-
-/*
- * Sleep control
- */
-int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
- bool set_chip, u16 sleep_duration)
-{
- unsigned int i;
- u32 staid, data;
-
- ATH5K_TRACE(ah->ah_sc);
- staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
-
- switch (mode) {
- case AR5K_PM_AUTO:
- staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
- /* fallthrough */
- case AR5K_PM_NETWORK_SLEEP:
- if (set_chip)
- ath5k_hw_reg_write(ah,
- AR5K_SLEEP_CTL_SLE_ALLOW |
- sleep_duration,
- AR5K_SLEEP_CTL);
-
- staid |= AR5K_STA_ID1_PWR_SV;
- break;
-
- case AR5K_PM_FULL_SLEEP:
- if (set_chip)
- ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
- AR5K_SLEEP_CTL);
-
- staid |= AR5K_STA_ID1_PWR_SV;
- break;
-
- case AR5K_PM_AWAKE:
-
- staid &= ~AR5K_STA_ID1_PWR_SV;
-
- if (!set_chip)
- goto commit;
-
- /* Preserve sleep duration */
- data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
- if( data & 0xffc00000 ){
- data = 0;
- } else {
- data = data & 0xfffcffff;
- }
-
- ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
- udelay(15);
-
- for (i = 50; i > 0; i--) {
- /* Check if the chip did wake up */
- if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
- AR5K_PCICFG_SPWR_DN) == 0)
- break;
-
- /* Wait a bit and retry */
- udelay(200);
- ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
- }
-
- /* Fail if the chip didn't wake up */
- if (i <= 0)
- return -EIO;
-
- break;
-
- default:
- return -EINVAL;
- }
-
-commit:
- ah->ah_power_mode = mode;
- ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
-
- return 0;
-}
-
-/***********************\
- DMA Related Functions
-\***********************/
-
-/*
- * Receive functions
- */
-
-/*
- * Start DMA receive
- */
-void ath5k_hw_start_rx(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
- ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
- ath5k_hw_reg_read(ah, AR5K_CR);
-}
-
-/*
- * Stop DMA receive
- */
-int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
-{
- unsigned int i;
-
- ATH5K_TRACE(ah->ah_sc);
- ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR);
-
- /*
- * It may take some time to disable the DMA receive unit
- */
- for (i = 2000; i > 0 &&
- (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
- i--)
- udelay(10);
-
- return i ? 0 : -EBUSY;
-}
-
-/*
- * Get the address of the RX Descriptor
- */
-u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah)
-{
- return ath5k_hw_reg_read(ah, AR5K_RXDP);
-}
-
-/*
- * Set the address of the RX Descriptor
- */
-void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr)
-{
- ATH5K_TRACE(ah->ah_sc);
-
- /*TODO:Shouldn't we check if RX is enabled first ?*/
- ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
-}
-
-/*
- * Transmit functions
- */
-
-/*
- * Start DMA transmit for a specific queue
- * (see also QCU/DCU functions)
- */
-int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue)
-{
- u32 tx_queue;
-
- ATH5K_TRACE(ah->ah_sc);
- AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
- /* Return if queue is declared inactive */
- if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
- return -EIO;
-
- if (ah->ah_version == AR5K_AR5210) {
- tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
-
- /*
- * Set the queue by type on 5210
- */
- switch (ah->ah_txq[queue].tqi_type) {
- case AR5K_TX_QUEUE_DATA:
- tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0;
- break;
- case AR5K_TX_QUEUE_BEACON:
- tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
- ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
- AR5K_BSR);
- break;
- case AR5K_TX_QUEUE_CAB:
- tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
- ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V |
- AR5K_BCR_BDMAE, AR5K_BSR);
- break;
- default:
- return -EINVAL;
- }
- /* Start queue */
- ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
- ath5k_hw_reg_read(ah, AR5K_CR);
- } else {
- /* Return if queue is disabled */
- if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
- return -EIO;
-
- /* Start queue */
- AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue);
- }
-
- return 0;
-}
-
-/*
- * Stop DMA transmit for a specific queue
- * (see also QCU/DCU functions)
- */
-int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
-{
- unsigned int i = 100;
- u32 tx_queue, pending;
-
- ATH5K_TRACE(ah->ah_sc);
- AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
- /* Return if queue is declared inactive */
- if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
- return -EIO;
-
- if (ah->ah_version == AR5K_AR5210) {
- tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
-
- /*
- * Set by queue type
- */
- switch (ah->ah_txq[queue].tqi_type) {
- case AR5K_TX_QUEUE_DATA:
- tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0;
- break;
- case AR5K_TX_QUEUE_BEACON:
- case AR5K_TX_QUEUE_CAB:
- /* XXX Fix me... */
- tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1;
- ath5k_hw_reg_write(ah, 0, AR5K_BSR);
- break;
- default:
- return -EINVAL;
- }
-
- /* Stop queue */
- ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
- ath5k_hw_reg_read(ah, AR5K_CR);
- } else {
- /*
- * Schedule TX disable and wait until queue is empty
- */
- AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
-
- /*Check for pending frames*/
- do {
- pending = ath5k_hw_reg_read(ah,
- AR5K_QUEUE_STATUS(queue)) &
- AR5K_QCU_STS_FRMPENDCNT;
- udelay(100);
- } while (--i && pending);
-
- /* Clear register */
- ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
- if (pending)
- return -EBUSY;
- }
-
- /* TODO: Check for success else return error */
- return 0;
-}
-
-/*
- * Get the address of the TX Descriptor for a specific queue
- * (see also QCU/DCU functions)
- */
-u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue)
-{
- u16 tx_reg;
-
- ATH5K_TRACE(ah->ah_sc);
- AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
- /*
- * Get the transmit queue descriptor pointer from the selected queue
- */
- /*5210 doesn't have QCU*/
- if (ah->ah_version == AR5K_AR5210) {
- switch (ah->ah_txq[queue].tqi_type) {
- case AR5K_TX_QUEUE_DATA:
- tx_reg = AR5K_NOQCU_TXDP0;
- break;
- case AR5K_TX_QUEUE_BEACON:
- case AR5K_TX_QUEUE_CAB:
- tx_reg = AR5K_NOQCU_TXDP1;
- break;
- default:
- return 0xffffffff;
- }
- } else {
- tx_reg = AR5K_QUEUE_TXDP(queue);
- }
-
- return ath5k_hw_reg_read(ah, tx_reg);
-}
-
-/*
- * Set the address of the TX Descriptor for a specific queue
- * (see also QCU/DCU functions)
- */
-int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
-{
- u16 tx_reg;
-
- ATH5K_TRACE(ah->ah_sc);
- AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
- /*
- * Set the transmit queue descriptor pointer register by type
- * on 5210
- */
- if (ah->ah_version == AR5K_AR5210) {
- switch (ah->ah_txq[queue].tqi_type) {
- case AR5K_TX_QUEUE_DATA:
- tx_reg = AR5K_NOQCU_TXDP0;
- break;
- case AR5K_TX_QUEUE_BEACON:
- case AR5K_TX_QUEUE_CAB:
- tx_reg = AR5K_NOQCU_TXDP1;
- break;
- default:
- return -EINVAL;
- }
- } else {
- /*
- * Set the transmit queue descriptor pointer for
- * the selected queue on QCU for 5211+
- * (this won't work if the queue is still active)
- */
- if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
- return -EIO;
-
- tx_reg = AR5K_QUEUE_TXDP(queue);
- }
-
- /* Set descriptor pointer */
- ath5k_hw_reg_write(ah, phys_addr, tx_reg);
-
- return 0;
-}
-
-/*
- * Update tx trigger level
- */
-int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
-{
- u32 trigger_level, imr;
- int ret = -EIO;
-
- ATH5K_TRACE(ah->ah_sc);
-
- /*
- * Disable interrupts by setting the mask
- */
- imr = ath5k_hw_set_intr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL);
-
- /*TODO: Boundary check on trigger_level*/
- trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG),
- AR5K_TXCFG_TXFULL);
-
- if (!increase) {
- if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES)
- goto done;
- } else
- trigger_level +=
- ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2);
-
- /*
- * Update trigger level on success
- */
- if (ah->ah_version == AR5K_AR5210)
- ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL);
- else
- AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
- AR5K_TXCFG_TXFULL, trigger_level);
-
- ret = 0;
-
-done:
- /*
- * Restore interrupt mask
- */
- ath5k_hw_set_intr(ah, imr);
-
- return ret;
-}
-
-/*
- * Interrupt handling
- */
-
-/*
- * Check if we have pending interrupts
- */
-bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
- return ath5k_hw_reg_read(ah, AR5K_INTPEND);
-}
-
-/*
- * Get interrupt mask (ISR)
- */
-int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
-{
- u32 data;
-
- ATH5K_TRACE(ah->ah_sc);
-
- /*
- * Read interrupt status from the Interrupt Status register
- * on 5210
- */
- if (ah->ah_version == AR5K_AR5210) {
- data = ath5k_hw_reg_read(ah, AR5K_ISR);
- if (unlikely(data == AR5K_INT_NOCARD)) {
- *interrupt_mask = data;
- return -ENODEV;
- }
- } else {
- /*
- * Read interrupt status from the Read-And-Clear shadow register
- * Note: PISR/SISR Not available on 5210
- */
- data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
- }
-
- /*
- * Get abstract interrupt mask (driver-compatible)
- */
- *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
-
- if (unlikely(data == AR5K_INT_NOCARD))
- return -ENODEV;
-
- if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR))
- *interrupt_mask |= AR5K_INT_RX;
-
- if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR
- | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL))
- *interrupt_mask |= AR5K_INT_TX;
-
- if (ah->ah_version != AR5K_AR5210) {
- /*HIU = Host Interface Unit (PCI etc)*/
- if (unlikely(data & (AR5K_ISR_HIUERR)))
- *interrupt_mask |= AR5K_INT_FATAL;
-
- /*Beacon Not Ready*/
- if (unlikely(data & (AR5K_ISR_BNR)))
- *interrupt_mask |= AR5K_INT_BNR;
- }
-
- /*
- * XXX: BMISS interrupts may occur after association.
- * I found this on 5210 code but it needs testing. If this is
- * true we should disable them before assoc and re-enable them
- * after a successfull assoc + some jiffies.
- */
-#if 0
- interrupt_mask &= ~AR5K_INT_BMISS;
-#endif
-
- /*
- * In case we didn't handle anything,
- * print the register value.
- */
- if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
- ATH5K_PRINTF("0x%08x\n", data);
-
- return 0;
-}
-
-/*
- * Set interrupt mask
- */
-enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
-{
- enum ath5k_int old_mask, int_mask;
-
- /*
- * Disable card interrupts to prevent any race conditions
- * (they will be re-enabled afterwards).
- */
- ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
- ath5k_hw_reg_read(ah, AR5K_IER);
-
- old_mask = ah->ah_imr;
-
- /*
- * Add additional, chipset-dependent interrupt mask flags
- * and write them to the IMR (interrupt mask register).
- */
- int_mask = new_mask & AR5K_INT_COMMON;
-
- if (new_mask & AR5K_INT_RX)
- int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN |
- AR5K_IMR_RXDESC;
-
- if (new_mask & AR5K_INT_TX)
- int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC |
- AR5K_IMR_TXURN;
-
- if (ah->ah_version != AR5K_AR5210) {
- if (new_mask & AR5K_INT_FATAL) {
- int_mask |= AR5K_IMR_HIUERR;
- AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT |
- AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR);
- }
- }
-
- ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
-
- /* Store new interrupt mask */
- ah->ah_imr = new_mask;
-
- /* ..re-enable interrupts */
- ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
- ath5k_hw_reg_read(ah, AR5K_IER);
-
- return old_mask;
-}
-
-
-/*************************\
- EEPROM access functions
-\*************************/
-
-/*
- * Read from eeprom
- */
-static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data)
-{
- u32 status, timeout;
-
- ATH5K_TRACE(ah->ah_sc);
- /*
- * Initialize EEPROM access
- */
- if (ah->ah_version == AR5K_AR5210) {
- AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
- (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
- } else {
- ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
- AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
- AR5K_EEPROM_CMD_READ);
- }
-
- for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
- status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
- if (status & AR5K_EEPROM_STAT_RDDONE) {
- if (status & AR5K_EEPROM_STAT_RDERR)
- return -EIO;
- *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
- 0xffff);
- return 0;
- }
- udelay(15);
- }
-
- return -ETIMEDOUT;
-}
-
-/*
- * Write to eeprom - currently disabled, use at your own risk
- */
-#if 0
-static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data)
-{
-
- u32 status, timeout;
-
- ATH5K_TRACE(ah->ah_sc);
-
- /*
- * Initialize eeprom access
- */
-
- if (ah->ah_version == AR5K_AR5210) {
- AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
- } else {
- AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
- AR5K_EEPROM_CMD_RESET);
- }
-
- /*
- * Write data to data register
- */
-
- if (ah->ah_version == AR5K_AR5210) {
- ath5k_hw_reg_write(ah, data, AR5K_EEPROM_BASE + (4 * offset));
- } else {
- ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
- ath5k_hw_reg_write(ah, data, AR5K_EEPROM_DATA);
- AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
- AR5K_EEPROM_CMD_WRITE);
- }
-
- /*
- * Check status
- */
-
- for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
- status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
- if (status & AR5K_EEPROM_STAT_WRDONE) {
- if (status & AR5K_EEPROM_STAT_WRERR)
- return EIO;
- return 0;
- }
- udelay(15);
- }
-
- ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!");
- return -EIO;
-}
-#endif
-
-/*
- * Translate binary channel representation in EEPROM to frequency
- */
-static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, unsigned int mode)
-{
- u16 val;
-
- if (bin == AR5K_EEPROM_CHANNEL_DIS)
- return bin;
-
- if (mode == AR5K_EEPROM_MODE_11A) {
- if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
- val = (5 * bin) + 4800;
- else
- val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
- (bin * 10) + 5100;
- } else {
- if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
- val = bin + 2300;
- else
- val = bin + 2400;
- }
-
- return val;
-}
-
-/*
- * Read antenna infos from eeprom
- */
-static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
- unsigned int mode)
-{
- struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
- u32 o = *offset;
- u16 val;
- int ret, i = 0;
-
- AR5K_EEPROM_READ(o++, val);
- ee->ee_switch_settling[mode] = (val >> 8) & 0x7f;
- ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f;
- ee->ee_ant_control[mode][i] = (val << 4) & 0x3f;
-
- AR5K_EEPROM_READ(o++, val);
- ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf;
- ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
- ee->ee_ant_control[mode][i++] = val & 0x3f;
-
- AR5K_EEPROM_READ(o++, val);
- ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f;
- ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f;
- ee->ee_ant_control[mode][i] = (val << 2) & 0x3f;
-
- AR5K_EEPROM_READ(o++, val);
- ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3;
- ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f;
- ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f;
- ee->ee_ant_control[mode][i] = (val << 4) & 0x3f;
-
- AR5K_EEPROM_READ(o++, val);
- ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf;
- ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
- ee->ee_ant_control[mode][i++] = val & 0x3f;
-
- /* Get antenna modes */
- ah->ah_antenna[mode][0] =
- (ee->ee_ant_control[mode][0] << 4) | 0x1;
- ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
- ee->ee_ant_control[mode][1] |
- (ee->ee_ant_control[mode][2] << 6) |
- (ee->ee_ant_control[mode][3] << 12) |
- (ee->ee_ant_control[mode][4] << 18) |
- (ee->ee_ant_control[mode][5] << 24);
- ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
- ee->ee_ant_control[mode][6] |
- (ee->ee_ant_control[mode][7] << 6) |
- (ee->ee_ant_control[mode][8] << 12) |
- (ee->ee_ant_control[mode][9] << 18) |
- (ee->ee_ant_control[mode][10] << 24);
-
- /* return new offset */
- *offset = o;
-
- return 0;
-}
-
-/*
- * Read supported modes from eeprom
- */
-static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
- unsigned int mode)
-{
- struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
- u32 o = *offset;
- u16 val;
- int ret;
-
- AR5K_EEPROM_READ(o++, val);
- ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff;
- ee->ee_thr_62[mode] = val & 0xff;
-
- if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
- ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
-
- AR5K_EEPROM_READ(o++, val);
- ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff;
- ee->ee_tx_frm2xpa_enable[mode] = val & 0xff;
-
- AR5K_EEPROM_READ(o++, val);
- ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff;
-
- if ((val & 0xff) & 0x80)
- ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
- else
- ee->ee_noise_floor_thr[mode] = val & 0xff;
-
- if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
- ee->ee_noise_floor_thr[mode] =
- mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
-
- AR5K_EEPROM_READ(o++, val);
- ee->ee_xlna_gain[mode] = (val >> 5) & 0xff;
- ee->ee_x_gain[mode] = (val >> 1) & 0xf;
- ee->ee_xpd[mode] = val & 0x1;
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0)
- ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) {
- AR5K_EEPROM_READ(o++, val);
- ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
-
- if (mode == AR5K_EEPROM_MODE_11A)
- ee->ee_xr_power[mode] = val & 0x3f;
- else {
- ee->ee_ob[mode][0] = val & 0x7;
- ee->ee_db[mode][0] = (val >> 3) & 0x7;
- }
- }
-
- if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) {
- ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
- ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
- } else {
- ee->ee_i_gain[mode] = (val >> 13) & 0x7;
-
- AR5K_EEPROM_READ(o++, val);
- ee->ee_i_gain[mode] |= (val << 3) & 0x38;
-
- if (mode == AR5K_EEPROM_MODE_11G)
- ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
- }
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
- mode == AR5K_EEPROM_MODE_11A) {
- ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
- ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
- }
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 &&
- mode == AR5K_EEPROM_MODE_11G)
- ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
-
- /* return new offset */
- *offset = o;
-
- return 0;
-}
-
-/*
- * Initialize eeprom & capabilities structs
- */
-static int ath5k_eeprom_init(struct ath5k_hw *ah)
-{
- struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
- unsigned int mode, i;
- int ret;
- u32 offset;
- u16 val;
-
- /* Initial TX thermal adjustment values */
- ee->ee_tx_clip = 4;
- ee->ee_pwd_84 = ee->ee_pwd_90 = 1;
- ee->ee_gain_select = 1;
-
- /*
- * Read values from EEPROM and store them in the capability structure
- */
- AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic);
- AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect);
- AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain);
- AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version);
- AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header);
-
- /* Return if we have an old EEPROM */
- if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
- return 0;
-
-#ifdef notyet
- /*
- * Validate the checksum of the EEPROM date. There are some
- * devices with invalid EEPROMs.
- */
- for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
- AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
- cksum ^= val;
- }
- if (cksum != AR5K_EEPROM_INFO_CKSUM) {
- ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
- return -EIO;
- }
-#endif
-
- AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
- ee_ant_gain);
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
- AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0);
- AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1);
- }
-
- if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) {
- AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
- ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
- ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
-
- AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
- ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
- ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
- }
-
- /*
- * Get conformance test limit values
- */
- offset = AR5K_EEPROM_CTL(ah->ah_ee_version);
- ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version);
-
- for (i = 0; i < ee->ee_ctls; i++) {
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_ctl[i] = (val >> 8) & 0xff;
- ee->ee_ctl[i + 1] = val & 0xff;
- }
-
- /*
- * Get values for 802.11a (5GHz)
- */
- mode = AR5K_EEPROM_MODE_11A;
-
- ee->ee_turbo_max_power[mode] =
- AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
-
- offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version);
-
- ret = ath5k_eeprom_read_ants(ah, &offset, mode);
- if (ret)
- return ret;
-
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff);
- ee->ee_ob[mode][3] = (val >> 5) & 0x7;
- ee->ee_db[mode][3] = (val >> 2) & 0x7;
- ee->ee_ob[mode][2] = (val << 1) & 0x7;
-
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_ob[mode][2] |= (val >> 15) & 0x1;
- ee->ee_db[mode][2] = (val >> 12) & 0x7;
- ee->ee_ob[mode][1] = (val >> 9) & 0x7;
- ee->ee_db[mode][1] = (val >> 6) & 0x7;
- ee->ee_ob[mode][0] = (val >> 3) & 0x7;
- ee->ee_db[mode][0] = val & 0x7;
-
- ret = ath5k_eeprom_read_modes(ah, &offset, mode);
- if (ret)
- return ret;
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) {
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_margin_tx_rx[mode] = val & 0x3f;
- }
-
- /*
- * Get values for 802.11b (2.4GHz)
- */
- mode = AR5K_EEPROM_MODE_11B;
- offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version);
-
- ret = ath5k_eeprom_read_ants(ah, &offset, mode);
- if (ret)
- return ret;
-
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff);
- ee->ee_ob[mode][1] = (val >> 4) & 0x7;
- ee->ee_db[mode][1] = val & 0x7;
-
- ret = ath5k_eeprom_read_modes(ah, &offset, mode);
- if (ret)
- return ret;
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_cal_pier[mode][0] =
- ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
- ee->ee_cal_pier[mode][1] =
- ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
-
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_cal_pier[mode][2] =
- ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
- }
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
- ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
-
- /*
- * Get values for 802.11g (2.4GHz)
- */
- mode = AR5K_EEPROM_MODE_11G;
- offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version);
-
- ret = ath5k_eeprom_read_ants(ah, &offset, mode);
- if (ret)
- return ret;
-
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff);
- ee->ee_ob[mode][1] = (val >> 4) & 0x7;
- ee->ee_db[mode][1] = val & 0x7;
-
- ret = ath5k_eeprom_read_modes(ah, &offset, mode);
- if (ret)
- return ret;
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_cal_pier[mode][0] =
- ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
- ee->ee_cal_pier[mode][1] =
- ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
-
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_turbo_max_power[mode] = val & 0x7f;
- ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
-
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_cal_pier[mode][2] =
- ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
- ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
-
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
- ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
-
- if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
- AR5K_EEPROM_READ(offset++, val);
- ee->ee_cck_ofdm_gain_delta = val & 0xff;
- }
- }
-
- /*
- * Read 5GHz EEPROM channels
- */
-
- return 0;
-}
-
-/*
- * Read the MAC address from eeprom
- */
-static int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
-{
- u8 mac_d[ETH_ALEN];
- u32 total, offset;
- u16 data;
- int octet, ret;
-
- memset(mac, 0, ETH_ALEN);
- memset(mac_d, 0, ETH_ALEN);
-
- ret = ath5k_hw_eeprom_read(ah, 0x20, &data);
- if (ret)
- return ret;
-
- for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
- ret = ath5k_hw_eeprom_read(ah, offset, &data);
- if (ret)
- return ret;
-
- total += data;
- mac_d[octet + 1] = data & 0xff;
- mac_d[octet] = data >> 8;
- octet += 2;
- }
-
- memcpy(mac, mac_d, ETH_ALEN);
-
- if (!total || total == 3 * 0xffff)
- return -EINVAL;
-
- return 0;
-}
-
-/*
- * Fill the capabilities struct
- */
-static int ath5k_hw_get_capabilities(struct ath5k_hw *ah)
-{
- u16 ee_header;
-
- ATH5K_TRACE(ah->ah_sc);
- /* Capabilities stored in the EEPROM */
- ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
-
- if (ah->ah_version == AR5K_AR5210) {
- /*
- * Set radio capabilities
- * (The AR5110 only supports the middle 5GHz band)
- */
- ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
- ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
- ah->ah_capabilities.cap_range.range_2ghz_min = 0;
- ah->ah_capabilities.cap_range.range_2ghz_max = 0;
-
- /* Set supported modes */
- __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode);
- __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode);
- } else {
- /*
- * XXX The tranceiver supports frequencies from 4920 to 6100GHz
- * XXX and from 2312 to 2732GHz. There are problems with the
- * XXX current ieee80211 implementation because the IEEE
- * XXX channel mapping does not support negative channel
- * XXX numbers (2312MHz is channel -19). Of course, this
- * XXX doesn't matter because these channels are out of range
- * XXX but some regulation domains like MKK (Japan) will
- * XXX support frequencies somewhere around 4.8GHz.
- */
-
- /*
- * Set radio capabilities
- */
-
- if (AR5K_EEPROM_HDR_11A(ee_header)) {
- ah->ah_capabilities.cap_range.range_5ghz_min = 5005; /* 4920 */
- ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
-
- /* Set supported modes */
- __set_bit(AR5K_MODE_11A,
- ah->ah_capabilities.cap_mode);
- __set_bit(AR5K_MODE_11A_TURBO,
- ah->ah_capabilities.cap_mode);
- if (ah->ah_version == AR5K_AR5212)
- __set_bit(AR5K_MODE_11G_TURBO,
- ah->ah_capabilities.cap_mode);
- }
-
- /* Enable 802.11b if a 2GHz capable radio (2111/5112) is
- * connected */
- if (AR5K_EEPROM_HDR_11B(ee_header) ||
- AR5K_EEPROM_HDR_11G(ee_header)) {
- ah->ah_capabilities.cap_range.range_2ghz_min = 2412; /* 2312 */
- ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
-
- if (AR5K_EEPROM_HDR_11B(ee_header))
- __set_bit(AR5K_MODE_11B,
- ah->ah_capabilities.cap_mode);
-
- if (AR5K_EEPROM_HDR_11G(ee_header))
- __set_bit(AR5K_MODE_11G,
- ah->ah_capabilities.cap_mode);
- }
- }
-
- /* GPIO */
- ah->ah_gpio_npins = AR5K_NUM_GPIO;
-
- /* Set number of supported TX queues */
- if (ah->ah_version == AR5K_AR5210)
- ah->ah_capabilities.cap_queues.q_tx_num =
- AR5K_NUM_TX_QUEUES_NOQCU;
- else
- ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
-
- return 0;
-}
-
-/*********************************\
- Protocol Control Unit Functions
-\*********************************/
-
-/*
- * Set Operation mode
- */
-int ath5k_hw_set_opmode(struct ath5k_hw *ah)
-{
- u32 pcu_reg, beacon_reg, low_id, high_id;
-
- pcu_reg = 0;
- beacon_reg = 0;
-
- ATH5K_TRACE(ah->ah_sc);
-
- switch (ah->ah_op_mode) {
- case IEEE80211_IF_TYPE_IBSS:
- pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA |
- (ah->ah_version == AR5K_AR5210 ?
- AR5K_STA_ID1_NO_PSPOLL : 0);
- beacon_reg |= AR5K_BCR_ADHOC;
- break;
-
- case IEEE80211_IF_TYPE_AP:
- pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
- (ah->ah_version == AR5K_AR5210 ?
- AR5K_STA_ID1_NO_PSPOLL : 0);
- beacon_reg |= AR5K_BCR_AP;
- break;
-
- case IEEE80211_IF_TYPE_STA:
- pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
- (ah->ah_version == AR5K_AR5210 ?
- AR5K_STA_ID1_PWR_SV : 0);
- case IEEE80211_IF_TYPE_MNTR:
- pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
- (ah->ah_version == AR5K_AR5210 ?
- AR5K_STA_ID1_NO_PSPOLL : 0);
- break;
-
- default:
- return -EINVAL;
- }
-
- /*
- * Set PCU registers
- */
- low_id = AR5K_LOW_ID(ah->ah_sta_id);
- high_id = AR5K_HIGH_ID(ah->ah_sta_id);
- ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
- ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
-
- /*
- * Set Beacon Control Register on 5210
- */
- if (ah->ah_version == AR5K_AR5210)
- ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
-
- return 0;
-}
-
-/*
- * BSSID Functions
- */
-
-/*
- * Get station id
- */
-void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
-{
- ATH5K_TRACE(ah->ah_sc);
- memcpy(mac, ah->ah_sta_id, ETH_ALEN);
-}
-
-/*
- * Set station id
- */
-int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
-{
- u32 low_id, high_id;
-
- ATH5K_TRACE(ah->ah_sc);
- /* Set new station ID */
- memcpy(ah->ah_sta_id, mac, ETH_ALEN);
-
- low_id = AR5K_LOW_ID(mac);
- high_id = AR5K_HIGH_ID(mac);
-
- ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
- ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1);
-
- return 0;
-}
-
-/*
- * Set BSSID
- */
-void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
-{
- u32 low_id, high_id;
- u16 tim_offset = 0;
-
- /*
- * Set simple BSSID mask on 5212
- */
- if (ah->ah_version == AR5K_AR5212) {
- ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0);
- ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1);
- }
-
- /*
- * Set BSSID which triggers the "SME Join" operation
- */
- low_id = AR5K_LOW_ID(bssid);
- high_id = AR5K_HIGH_ID(bssid);
- ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
- ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
- AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
-
- if (assoc_id == 0) {
- ath5k_hw_disable_pspoll(ah);
- return;
- }
-
- AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
- tim_offset ? tim_offset + 4 : 0);
-
- ath5k_hw_enable_pspoll(ah, NULL, 0);
-}
-/**
- * ath5k_hw_set_bssid_mask - set common bits we should listen to
- *
- * The bssid_mask is a utility used by AR5212 hardware to inform the hardware
- * which bits of the interface's MAC address should be looked at when trying
- * to decide which packets to ACK. In station mode every bit matters. In AP
- * mode with a single BSS every bit matters as well. In AP mode with
- * multiple BSSes not every bit matters.
- *
- * @ah: the &struct ath5k_hw
- * @mask: the bssid_mask, a u8 array of size ETH_ALEN
- *
- * Note that this is a simple filter and *does* not filter out all
- * relevant frames. Some non-relevant frames will get through, probability
- * jocks are welcomed to compute.
- *
- * When handling multiple BSSes (or VAPs) you can get the BSSID mask by
- * computing the set of:
- *
- * ~ ( MAC XOR BSSID )
- *
- * When you do this you are essentially computing the common bits. Later it
- * is assumed the harware will "and" (&) the BSSID mask with the MAC address
- * to obtain the relevant bits which should match on the destination frame.
- *
- * Simple example: on your card you have have two BSSes you have created with
- * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
- * There is another BSSID-03 but you are not part of it. For simplicity's sake,
- * assuming only 4 bits for a mac address and for BSSIDs you can then have:
- *
- * \
- * MAC: 0001 |
- * BSSID-01: 0100 | --> Belongs to us
- * BSSID-02: 1001 |
- * /
- * -------------------
- * BSSID-03: 0110 | --> External
- * -------------------
- *
- * Our bssid_mask would then be:
- *
- * On loop iteration for BSSID-01:
- * ~(0001 ^ 0100) -> ~(0101)
- * -> 1010
- * bssid_mask = 1010
- *
- * On loop iteration for BSSID-02:
- * bssid_mask &= ~(0001 ^ 1001)
- * bssid_mask = (1010) & ~(0001 ^ 1001)
- * bssid_mask = (1010) & ~(1001)
- * bssid_mask = (1010) & (0110)
- * bssid_mask = 0010
- *
- * A bssid_mask of 0010 means "only pay attention to the second least
- * significant bit". This is because its the only bit common
- * amongst the MAC and all BSSIDs we support. To findout what the real
- * common bit is we can simply "&" the bssid_mask now with any BSSID we have
- * or our MAC address (we assume the hardware uses the MAC address).
- *
- * Now, suppose there's an incoming frame for BSSID-03:
- *
- * IFRAME-01: 0110
- *
- * An easy eye-inspeciton of this already should tell you that this frame
- * will not pass our check. This is beacuse the bssid_mask tells the
- * hardware to only look at the second least significant bit and the
- * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
- * as 1, which does not match 0.
- *
- * So with IFRAME-01 we *assume* the hardware will do:
- *
- * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
- * --> allow = (0010) == 0000 ? 1 : 0;
- * --> allow = 0
- *
- * Lets now test a frame that should work:
- *
- * IFRAME-02: 0001 (we should allow)
- *
- * allow = (0001 & 1010) == 1010
- *
- * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0;
- * --> allow = (0010) == (0010)
- * --> allow = 1
- *
- * Other examples:
- *
- * IFRAME-03: 0100 --> allowed
- * IFRAME-04: 1001 --> allowed
- * IFRAME-05: 1101 --> allowed but its not for us!!!
- *
- */
-int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
-{
- u32 low_id, high_id;
- ATH5K_TRACE(ah->ah_sc);
-
- if (ah->ah_version == AR5K_AR5212) {
- low_id = AR5K_LOW_ID(mask);
- high_id = AR5K_HIGH_ID(mask);
-
- ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
- ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
-
- return 0;
- }
-
- return -EIO;
-}
-
-/*
- * Receive start/stop functions
- */
-
-/*
- * Start receive on PCU
- */
-void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
- AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
-
- /* TODO: ANI Support */
-}
-
-/*
- * Stop receive on PCU
- */
-void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
- AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
-
- /* TODO: ANI Support */
-}
-
-/*
- * RX Filter functions
- */
-
-/*
- * Set multicast filter
- */
-void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
-{
- ATH5K_TRACE(ah->ah_sc);
- /* Set the multicat filter */
- ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
- ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
-}
-
-/*
- * Set multicast filter by index
- */
-int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index)
-{
-
- ATH5K_TRACE(ah->ah_sc);
- if (index >= 64)
- return -EINVAL;
- else if (index >= 32)
- AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1,
- (1 << (index - 32)));
- else
- AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
-
- return 0;
-}
-
-/*
- * Clear Multicast filter by index
- */
-int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
-{
-
- ATH5K_TRACE(ah->ah_sc);
- if (index >= 64)
- return -EINVAL;
- else if (index >= 32)
- AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1,
- (1 << (index - 32)));
- else
- AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
-
- return 0;
-}
-
-/*
- * Get current rx filter
- */
-u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
-{
- u32 data, filter = 0;
-
- ATH5K_TRACE(ah->ah_sc);
- filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
-
- /*Radar detection for 5212*/
- if (ah->ah_version == AR5K_AR5212) {
- data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
-
- if (data & AR5K_PHY_ERR_FIL_RADAR)
- filter |= AR5K_RX_FILTER_RADARERR;
- if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
- filter |= AR5K_RX_FILTER_PHYERR;
- }
-
- return filter;
-}
-
-/*
- * Set rx filter
- */
-void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
-{
- u32 data = 0;
-
- ATH5K_TRACE(ah->ah_sc);
-
- /* Set PHY error filter register on 5212*/
- if (ah->ah_version == AR5K_AR5212) {
- if (filter & AR5K_RX_FILTER_RADARERR)
- data |= AR5K_PHY_ERR_FIL_RADAR;
- if (filter & AR5K_RX_FILTER_PHYERR)
- data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
- }
-
- /*
- * The AR5210 uses promiscous mode to detect radar activity
- */
- if (ah->ah_version == AR5K_AR5210 &&
- (filter & AR5K_RX_FILTER_RADARERR)) {
- filter &= ~AR5K_RX_FILTER_RADARERR;
- filter |= AR5K_RX_FILTER_PROM;
- }
-
- /*Zero length DMA*/
- if (data)
- AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
- else
- AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
-
- /*Write RX Filter register*/
- ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
-
- /*Write PHY error filter register on 5212*/
- if (ah->ah_version == AR5K_AR5212)
- ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
-
-}
-
-/*
- * Beacon related functions
- */
-
-/*
- * Get a 32bit TSF
- */
-u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
- return ath5k_hw_reg_read(ah, AR5K_TSF_L32);
-}
-
-/*
- * Get the full 64bit TSF
- */
-u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
-{
- u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
- ATH5K_TRACE(ah->ah_sc);
-
- return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32);
-}
-
-/*
- * Force a TSF reset
- */
-void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
- AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF);
-}
-
-/*
- * Initialize beacon timers
- */
-void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
-{
- u32 timer1, timer2, timer3;
-
- ATH5K_TRACE(ah->ah_sc);
- /*
- * Set the additional timers by mode
- */
- switch (ah->ah_op_mode) {
- case IEEE80211_IF_TYPE_STA:
- if (ah->ah_version == AR5K_AR5210) {
- timer1 = 0xffffffff;
- timer2 = 0xffffffff;
- } else {
- timer1 = 0x0000ffff;
- timer2 = 0x0007ffff;
- }
- break;
-
- default:
- timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
- timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
- }
-
- timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
-
- /*
- * Set the beacon register and enable all timers.
- * (next beacon, DMA beacon, software beacon, ATIM window time)
- */
- ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
- ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
- ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
- ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
-
- ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
- AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE),
- AR5K_BEACON);
-}
-
-#if 0
-/*
- * Set beacon timers
- */
-int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah,
- const struct ath5k_beacon_state *state)
-{
- u32 cfp_period, next_cfp, dtim, interval, next_beacon;
-
- /*
- * TODO: should be changed through *state
- * review struct ath5k_beacon_state struct
- *
- * XXX: These are used for cfp period bellow, are they
- * ok ? Is it O.K. for tsf here to be 0 or should we use
- * get_tsf ?
- */
- u32 dtim_count = 0; /* XXX */
- u32 cfp_count = 0; /* XXX */
- u32 tsf = 0; /* XXX */
-
- ATH5K_TRACE(ah->ah_sc);
- /* Return on an invalid beacon state */
- if (state->bs_interval < 1)
- return -EINVAL;
-
- interval = state->bs_interval;
- dtim = state->bs_dtim_period;
-
- /*
- * PCF support?
- */
- if (state->bs_cfp_period > 0) {
- /*
- * Enable PCF mode and set the CFP
- * (Contention Free Period) and timer registers
- */
- cfp_period = state->bs_cfp_period * state->bs_dtim_period *
- state->bs_interval;
- next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) *
- state->bs_interval;
-
- AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
- AR5K_STA_ID1_DEFAULT_ANTENNA |
- AR5K_STA_ID1_PCF);
- ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD);
- ath5k_hw_reg_write(ah, state->bs_cfp_max_duration,
- AR5K_CFP_DUR);
- ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period :
- next_cfp)) << 3, AR5K_TIMER2);
- } else {
- /* Disable PCF mode */
- AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
- AR5K_STA_ID1_DEFAULT_ANTENNA |
- AR5K_STA_ID1_PCF);
- }
-
- /*
- * Enable the beacon timer register
- */
- ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0);
-
- /*
- * Start the beacon timers
- */
- ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &~
- (AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) |
- AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0,
- AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval,
- AR5K_BEACON_PERIOD), AR5K_BEACON);
-
- /*
- * Write new beacon miss threshold, if it appears to be valid
- * XXX: Figure out right values for min <= bs_bmiss_threshold <= max
- * and return if its not in range. We can test this by reading value and
- * setting value to a largest value and seeing which values register.
- */
-
- AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS,
- state->bs_bmiss_threshold);
-
- /*
- * Set sleep control register
- * XXX: Didn't find this in 5210 code but since this register
- * exists also in ar5k's 5210 headers i leave it as common code.
- */
- AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR,
- (state->bs_sleep_duration - 3) << 3);
-
- /*
- * Set enhanced sleep registers on 5212
- */
- if (ah->ah_version == AR5K_AR5212) {
- if (state->bs_sleep_duration > state->bs_interval &&
- roundup(state->bs_sleep_duration, interval) ==
- state->bs_sleep_duration)
- interval = state->bs_sleep_duration;
-
- if (state->bs_sleep_duration > dtim && (dtim == 0 ||
- roundup(state->bs_sleep_duration, dtim) ==
- state->bs_sleep_duration))
- dtim = state->bs_sleep_duration;
-
- if (interval > dtim)
- return -EINVAL;
-
- next_beacon = interval == dtim ? state->bs_next_dtim :
- state->bs_next_beacon;
-
- ath5k_hw_reg_write(ah,
- AR5K_REG_SM((state->bs_next_dtim - 3) << 3,
- AR5K_SLEEP0_NEXT_DTIM) |
- AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) |
- AR5K_SLEEP0_ENH_SLEEP_EN |
- AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0);
-
- ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3,
- AR5K_SLEEP1_NEXT_TIM) |
- AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1);
-
- ath5k_hw_reg_write(ah,
- AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) |
- AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2);
- }
-
- return 0;
-}
-
-/*
- * Reset beacon timers
- */
-void ath5k_hw_reset_beacon(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
- /*
- * Disable beacon timer
- */
- ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
-
- /*
- * Disable some beacon register values
- */
- AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
- AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF);
- ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON);
-}
-
-/*
- * Wait for beacon queue to finish
- */
-int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
-{
- unsigned int i;
- int ret;
-
- ATH5K_TRACE(ah->ah_sc);
-
- /* 5210 doesn't have QCU*/
- if (ah->ah_version == AR5K_AR5210) {
- /*
- * Wait for beaconn queue to finish by checking
- * Control Register and Beacon Status Register.
- */
- for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) {
- if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F)
- ||
- !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F))
- break;
- udelay(10);
- }
-
- /* Timeout... */
- if (i <= 0) {
- /*
- * Re-schedule the beacon queue
- */
- ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1);
- ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
- AR5K_BCR);
-
- return -EIO;
- }
- ret = 0;
- } else {
- /*5211/5212*/
- ret = ath5k_hw_register_timeout(ah,
- AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON),
- AR5K_QCU_STS_FRMPENDCNT, 0, false);
-
- if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON))
- return -EIO;
- }
-
- return ret;
-}
-#endif
-
-/*
- * Update mib counters (statistics)
- */
-void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
- struct ieee80211_low_level_stats *stats)
-{
- ATH5K_TRACE(ah->ah_sc);
-
- /* Read-And-Clear */
- stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
- stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
- stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
- stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
-
- /* XXX: Should we use this to track beacon count ?
- * -we read it anyway to clear the register */
- ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
-
- /* Reset profile count registers on 5212*/
- if (ah->ah_version == AR5K_AR5212) {
- ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
- ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
- ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
- ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
- }
-}
-
-/** ath5k_hw_set_ack_bitrate - set bitrate for ACKs
- *
- * @ah: the &struct ath5k_hw
- * @high: determines if to use low bit rate or now
- */
-void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
-{
- if (ah->ah_version != AR5K_AR5212)
- return;
- else {
- u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
- if (high)
- AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
- else
- AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
- }
-}
-
-
-/*
- * ACK/CTS Timeouts
- */
-
-/*
- * Set ACK timeout on PCU
- */
-int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
-{
- ATH5K_TRACE(ah->ah_sc);
- if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
- ah->ah_turbo) <= timeout)
- return -EINVAL;
-
- AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
- ath5k_hw_htoclock(timeout, ah->ah_turbo));
-
- return 0;
-}
-
-/*
- * Read the ACK timeout from PCU
- */
-unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
-
- return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
- AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
-}
-
-/*
- * Set CTS timeout on PCU
- */
-int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
-{
- ATH5K_TRACE(ah->ah_sc);
- if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
- ah->ah_turbo) <= timeout)
- return -EINVAL;
-
- AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
- ath5k_hw_htoclock(timeout, ah->ah_turbo));
-
- return 0;
-}
-
-/*
- * Read CTS timeout from PCU
- */
-unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
- return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
- AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
-}
-
-/*
- * Key table (WEP) functions
- */
-
-int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
-{
- unsigned int i;
-
- ATH5K_TRACE(ah->ah_sc);
- AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
-
- for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
- ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
-
- /*
- * Set NULL encryption on AR5212+
- *
- * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5)
- * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007
- *
- * Note2: Windows driver (ndiswrapper) sets this to
- * 0x00000714 instead of 0x00000007
- */
- if (ah->ah_version > AR5K_AR5211)
- ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
- AR5K_KEYTABLE_TYPE(entry));
-
- return 0;
-}
-
-int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry)
-{
- ATH5K_TRACE(ah->ah_sc);
- AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
-
- /* Check the validation flag at the end of the entry */
- return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) &
- AR5K_KEYTABLE_VALID;
-}
-
-int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
- const struct ieee80211_key_conf *key, const u8 *mac)
-{
- unsigned int i;
- __le32 key_v[5] = {};
- u32 keytype;
-
- ATH5K_TRACE(ah->ah_sc);
-
- /* key->keylen comes in from mac80211 in bytes */
-
- if (key->keylen > AR5K_KEYTABLE_SIZE / 8)
- return -EOPNOTSUPP;
-
- switch (key->keylen) {
- /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit */
- case 40 / 8:
- memcpy(&key_v[0], key->key, 5);
- keytype = AR5K_KEYTABLE_TYPE_40;
- break;
-
- /* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit */
- case 104 / 8:
- memcpy(&key_v[0], &key->key[0], 6);
- memcpy(&key_v[2], &key->key[6], 6);
- memcpy(&key_v[4], &key->key[12], 1);
- keytype = AR5K_KEYTABLE_TYPE_104;
- break;
- /* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit */
- case 128 / 8:
- memcpy(&key_v[0], &key->key[0], 6);
- memcpy(&key_v[2], &key->key[6], 6);
- memcpy(&key_v[4], &key->key[12], 4);
- keytype = AR5K_KEYTABLE_TYPE_128;
- break;
-
- default:
- return -EINVAL; /* shouldn't happen */
- }
-
- for (i = 0; i < ARRAY_SIZE(key_v); i++)
- ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
- AR5K_KEYTABLE_OFF(entry, i));
-
- ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry));
-
- return ath5k_hw_set_key_lladdr(ah, entry, mac);
-}
-
-int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
-{
- u32 low_id, high_id;
-
- ATH5K_TRACE(ah->ah_sc);
- /* Invalid entry (key table overflow) */
- AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
-
- /* MAC may be NULL if it's a broadcast key. In this case no need to
- * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
- if (unlikely(mac == NULL)) {
- low_id = 0xffffffff;
- high_id = 0xffff | AR5K_KEYTABLE_VALID;
- } else {
- low_id = AR5K_LOW_ID(mac);
- high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
- }
-
- ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
- ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry));
-
- return 0;
-}
-
-
-/********************************************\
-Queue Control Unit, DFS Control Unit Functions
-\********************************************/
-
-/*
- * Initialize a transmit queue
- */
-int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
- struct ath5k_txq_info *queue_info)
-{
- unsigned int queue;
- int ret;
-
- ATH5K_TRACE(ah->ah_sc);
-
- /*
- * Get queue by type
- */
- /*5210 only has 2 queues*/
- if (ah->ah_version == AR5K_AR5210) {
- switch (queue_type) {
- case AR5K_TX_QUEUE_DATA:
- queue = AR5K_TX_QUEUE_ID_NOQCU_DATA;
- break;
- case AR5K_TX_QUEUE_BEACON:
- case AR5K_TX_QUEUE_CAB:
- queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON;
- break;
- default:
- return -EINVAL;
- }
- } else {
- switch (queue_type) {
- case AR5K_TX_QUEUE_DATA:
- for (queue = AR5K_TX_QUEUE_ID_DATA_MIN;
- ah->ah_txq[queue].tqi_type !=
- AR5K_TX_QUEUE_INACTIVE; queue++) {
-
- if (queue > AR5K_TX_QUEUE_ID_DATA_MAX)
- return -EINVAL;
- }
- break;
- case AR5K_TX_QUEUE_UAPSD:
- queue = AR5K_TX_QUEUE_ID_UAPSD;
- break;
- case AR5K_TX_QUEUE_BEACON:
- queue = AR5K_TX_QUEUE_ID_BEACON;
- break;
- case AR5K_TX_QUEUE_CAB:
- queue = AR5K_TX_QUEUE_ID_CAB;
- break;
- case AR5K_TX_QUEUE_XR_DATA:
- if (ah->ah_version != AR5K_AR5212)
- ATH5K_ERR(ah->ah_sc,
- "XR data queues only supported in"
- " 5212!\n");
- queue = AR5K_TX_QUEUE_ID_XR_DATA;
- break;
- default:
- return -EINVAL;
- }
- }
-
- /*
- * Setup internal queue structure
- */
- memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info));
- ah->ah_txq[queue].tqi_type = queue_type;
-
- if (queue_info != NULL) {
- queue_info->tqi_type = queue_type;
- ret = ath5k_hw_setup_tx_queueprops(ah, queue, queue_info);
- if (ret)
- return ret;
- }
- /*
- * We use ah_txq_status to hold a temp value for
- * the Secondary interrupt mask registers on 5211+
- * check out ath5k_hw_reset_tx_queue
- */
- AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue);
-
- return queue;
-}
-
-/*
- * Setup a transmit queue
- */
-int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue,
- const struct ath5k_txq_info *queue_info)
-{
- ATH5K_TRACE(ah->ah_sc);
- AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
- if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
- return -EIO;
-
- memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info));
-
- /*XXX: Is this supported on 5210 ?*/
- if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA &&
- ((queue_info->tqi_subtype == AR5K_WME_AC_VI) ||
- (queue_info->tqi_subtype == AR5K_WME_AC_VO))) ||
- queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD)
- ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS;
-
- return 0;
-}
-
-/*
- * Get properties for a specific transmit queue
- */
-int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
- struct ath5k_txq_info *queue_info)
-{
- ATH5K_TRACE(ah->ah_sc);
- memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
- return 0;
-}
-
-/*
- * Set a transmit queue inactive
- */
-void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
-{
- ATH5K_TRACE(ah->ah_sc);
- if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
- return;
-
- /* This queue will be skipped in further operations */
- ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
- /*For SIMR setup*/
- AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
-}
-
-/*
- * Set DFS params for a transmit queue
- */
-int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
-{
- u32 cw_min, cw_max, retry_lg, retry_sh;
- struct ath5k_txq_info *tq = &ah->ah_txq[queue];
-
- ATH5K_TRACE(ah->ah_sc);
- AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
- tq = &ah->ah_txq[queue];
-
- if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)
- return 0;
-
- if (ah->ah_version == AR5K_AR5210) {
- /* Only handle data queues, others will be ignored */
- if (tq->tqi_type != AR5K_TX_QUEUE_DATA)
- return 0;
-
- /* Set Slot time */
- ath5k_hw_reg_write(ah, ah->ah_turbo ?
- AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME,
- AR5K_SLOT_TIME);
- /* Set ACK_CTS timeout */
- ath5k_hw_reg_write(ah, ah->ah_turbo ?
- AR5K_INIT_ACK_CTS_TIMEOUT_TURBO :
- AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME);
- /* Set Transmit Latency */
- ath5k_hw_reg_write(ah, ah->ah_turbo ?
- AR5K_INIT_TRANSMIT_LATENCY_TURBO :
- AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210);
- /* Set IFS0 */
- if (ah->ah_turbo)
- ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO +
- (ah->ah_aifs + tq->tqi_aifs) *
- AR5K_INIT_SLOT_TIME_TURBO) <<
- AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO,
- AR5K_IFS0);
- else
- ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS +
- (ah->ah_aifs + tq->tqi_aifs) *
- AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) |
- AR5K_INIT_SIFS, AR5K_IFS0);
-
- /* Set IFS1 */
- ath5k_hw_reg_write(ah, ah->ah_turbo ?
- AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
- AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
- /* Set AR5K_PHY_SETTLING */
- ath5k_hw_reg_write(ah, ah->ah_turbo ?
- (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
- | 0x38 :
- (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
- | 0x1C,
- AR5K_PHY_SETTLING);
- /* Set Frame Control Register */
- ath5k_hw_reg_write(ah, ah->ah_turbo ?
- (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
- AR5K_PHY_TURBO_SHORT | 0x2020) :
- (AR5K_PHY_FRAME_CTL_INI | 0x1020),
- AR5K_PHY_FRAME_CTL_5210);
- }
-
- /*
- * Calculate cwmin/max by channel mode
- */
- cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN;
- cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX;
- ah->ah_aifs = AR5K_TUNE_AIFS;
- /*XR is only supported on 5212*/
- if (IS_CHAN_XR(ah->ah_current_channel) &&
- ah->ah_version == AR5K_AR5212) {
- cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR;
- cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR;
- ah->ah_aifs = AR5K_TUNE_AIFS_XR;
- /*B mode is not supported on 5210*/
- } else if (IS_CHAN_B(ah->ah_current_channel) &&
- ah->ah_version != AR5K_AR5210) {
- cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B;
- cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B;
- ah->ah_aifs = AR5K_TUNE_AIFS_11B;
- }
-
- cw_min = 1;
- while (cw_min < ah->ah_cw_min)
- cw_min = (cw_min << 1) | 1;
-
- cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) :
- ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1);
- cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) :
- ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1);
-
- /*
- * Calculate and set retry limits
- */
- if (ah->ah_software_retry) {
- /* XXX Need to test this */
- retry_lg = ah->ah_limit_tx_retries;
- retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ?
- AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg;
- } else {
- retry_lg = AR5K_INIT_LG_RETRY;
- retry_sh = AR5K_INIT_SH_RETRY;
- }
-
- /*No QCU/DCU [5210]*/
- if (ah->ah_version == AR5K_AR5210) {
- ath5k_hw_reg_write(ah,
- (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S)
- | AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
- AR5K_NODCU_RETRY_LMT_SLG_RETRY)
- | AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
- AR5K_NODCU_RETRY_LMT_SSH_RETRY)
- | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY)
- | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY),
- AR5K_NODCU_RETRY_LMT);
- } else {
- /*QCU/DCU [5211+]*/
- ath5k_hw_reg_write(ah,
- AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
- AR5K_DCU_RETRY_LMT_SLG_RETRY) |
- AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
- AR5K_DCU_RETRY_LMT_SSH_RETRY) |
- AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) |
- AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY),
- AR5K_QUEUE_DFS_RETRY_LIMIT(queue));
-
- /*===Rest is also for QCU/DCU only [5211+]===*/
-
- /*
- * Set initial content window (cw_min/cw_max)
- * and arbitrated interframe space (aifs)...
- */
- ath5k_hw_reg_write(ah,
- AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
- AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
- AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs,
- AR5K_DCU_LCL_IFS_AIFS),
- AR5K_QUEUE_DFS_LOCAL_IFS(queue));
-
- /*
- * Set misc registers
- */
- ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY,
- AR5K_QUEUE_MISC(queue));
-
- if (tq->tqi_cbr_period) {
- ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
- AR5K_QCU_CBRCFG_INTVAL) |
- AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
- AR5K_QCU_CBRCFG_ORN_THRES),
- AR5K_QUEUE_CBRCFG(queue));
- AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
- AR5K_QCU_MISC_FRSHED_CBR);
- if (tq->tqi_cbr_overflow_limit)
- AR5K_REG_ENABLE_BITS(ah,
- AR5K_QUEUE_MISC(queue),
- AR5K_QCU_MISC_CBR_THRES_ENABLE);
- }
-
- if (tq->tqi_ready_time)
- ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
- AR5K_QCU_RDYTIMECFG_INTVAL) |
- AR5K_QCU_RDYTIMECFG_ENABLE,
- AR5K_QUEUE_RDYTIMECFG(queue));
-
- if (tq->tqi_burst_time) {
- ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
- AR5K_DCU_CHAN_TIME_DUR) |
- AR5K_DCU_CHAN_TIME_ENABLE,
- AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
-
- if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
- AR5K_REG_ENABLE_BITS(ah,
- AR5K_QUEUE_MISC(queue),
- AR5K_QCU_MISC_RDY_VEOL_POLICY);
- }
-
- if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
- ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
- AR5K_QUEUE_DFS_MISC(queue));
-
- if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
- ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
- AR5K_QUEUE_DFS_MISC(queue));
-
- /*
- * Set registers by queue type
- */
- switch (tq->tqi_type) {
- case AR5K_TX_QUEUE_BEACON:
- AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
- AR5K_QCU_MISC_FRSHED_DBA_GT |
- AR5K_QCU_MISC_CBREXP_BCN |
- AR5K_QCU_MISC_BCN_ENABLE);
-
- AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
- (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
- AR5K_DCU_MISC_ARBLOCK_CTL_S) |
- AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
- AR5K_DCU_MISC_BCN_ENABLE);
-
- ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
- (AR5K_TUNE_SW_BEACON_RESP -
- AR5K_TUNE_DMA_BEACON_RESP) -
- AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
- AR5K_QCU_RDYTIMECFG_ENABLE,
- AR5K_QUEUE_RDYTIMECFG(queue));
- break;
-
- case AR5K_TX_QUEUE_CAB:
- AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
- AR5K_QCU_MISC_FRSHED_DBA_GT |
- AR5K_QCU_MISC_CBREXP |
- AR5K_QCU_MISC_CBREXP_BCN);
-
- AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
- (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
- AR5K_DCU_MISC_ARBLOCK_CTL_S));
- break;
-
- case AR5K_TX_QUEUE_UAPSD:
- AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
- AR5K_QCU_MISC_CBREXP);
- break;
-
- case AR5K_TX_QUEUE_DATA:
- default:
- break;
- }
-
- /*
- * Enable interrupts for this tx queue
- * in the secondary interrupt mask registers
- */
- if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
- AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
-
- if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
- AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
-
- if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
- AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
-
- if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
- AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
-
- if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
- AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
-
-
- /* Update secondary interrupt mask registers */
- ah->ah_txq_imr_txok &= ah->ah_txq_status;
- ah->ah_txq_imr_txerr &= ah->ah_txq_status;
- ah->ah_txq_imr_txurn &= ah->ah_txq_status;
- ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
- ah->ah_txq_imr_txeol &= ah->ah_txq_status;
-
- ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
- AR5K_SIMR0_QCU_TXOK) |
- AR5K_REG_SM(ah->ah_txq_imr_txdesc,
- AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0);
- ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
- AR5K_SIMR1_QCU_TXERR) |
- AR5K_REG_SM(ah->ah_txq_imr_txeol,
- AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1);
- ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn,
- AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2);
- }
-
- return 0;
-}
-
-/*
- * Get number of pending frames
- * for a specific queue [5211+]
- */
-u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) {
- ATH5K_TRACE(ah->ah_sc);
- AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
- /* Return if queue is declared inactive */
- if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
- return false;
-
- /* XXX: How about AR5K_CFG_TXCNT ? */
- if (ah->ah_version == AR5K_AR5210)
- return false;
-
- return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT;
-}
-
-/*
- * Set slot time
- */
-int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
-{
- ATH5K_TRACE(ah->ah_sc);
- if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX)
- return -EINVAL;
-
- if (ah->ah_version == AR5K_AR5210)
- ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time,
- ah->ah_turbo), AR5K_SLOT_TIME);
- else
- ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT);
-
- return 0;
-}
-
-/*
- * Get slot time
- */
-unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
- if (ah->ah_version == AR5K_AR5210)
- return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah,
- AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo);
- else
- return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff;
-}
-
-
-/******************************\
- Hardware Descriptor Functions
-\******************************/
-
-/*
- * TX Descriptor
- */
-
-/*
- * Initialize the 2-word tx descriptor on 5210/5211
- */
-static int
-ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
- unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type,
- unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0,
- unsigned int key_index, unsigned int antenna_mode, unsigned int flags,
- unsigned int rtscts_rate, unsigned int rtscts_duration)
-{
- u32 frame_type;
- struct ath5k_hw_2w_tx_ctl *tx_ctl;
- unsigned int frame_len;
-
- tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
-
- /*
- * Validate input
- * - Zero retries don't make sense.
- * - A zero rate will put the HW into a mode where it continously sends
- * noise on the channel, so it is important to avoid this.
- */
- if (unlikely(tx_tries0 == 0)) {
- ATH5K_ERR(ah->ah_sc, "zero retries\n");
- WARN_ON(1);
- return -EINVAL;
- }
- if (unlikely(tx_rate0 == 0)) {
- ATH5K_ERR(ah->ah_sc, "zero rate\n");
- WARN_ON(1);
- return -EINVAL;
- }
-
- /* Clear descriptor */
- memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc));
-
- /* Setup control descriptor */
-
- /* Verify and set frame length */
-
- /* remove padding we might have added before */
- frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
-
- if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
- return -EINVAL;
-
- tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
-
- /* Verify and set buffer length */
-
- /* NB: beacon's BufLen must be a multiple of 4 bytes */
- if(type == AR5K_PKT_TYPE_BEACON)
- pkt_len = roundup(pkt_len, 4);
-
- if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
- return -EINVAL;
-
- tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
-
- /*
- * Verify and set header length
- * XXX: I only found that on 5210 code, does it work on 5211 ?
- */
- if (ah->ah_version == AR5K_AR5210) {
- if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN)
- return -EINVAL;
- tx_ctl->tx_control_0 |=
- AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN);
- }
-
- /*Diferences between 5210-5211*/
- if (ah->ah_version == AR5K_AR5210) {
- switch (type) {
- case AR5K_PKT_TYPE_BEACON:
- case AR5K_PKT_TYPE_PROBE_RESP:
- frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY;
- case AR5K_PKT_TYPE_PIFS:
- frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS;
- default:
- frame_type = type /*<< 2 ?*/;
- }
-
- tx_ctl->tx_control_0 |=
- AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) |
- AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
- } else {
- tx_ctl->tx_control_0 |=
- AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) |
- AR5K_REG_SM(antenna_mode, AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT);
- tx_ctl->tx_control_1 |=
- AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE);
- }
-#define _TX_FLAGS(_c, _flag) \
- if (flags & AR5K_TXDESC_##_flag) \
- tx_ctl->tx_control_##_c |= \
- AR5K_2W_TX_DESC_CTL##_c##_##_flag
-
- _TX_FLAGS(0, CLRDMASK);
- _TX_FLAGS(0, VEOL);
- _TX_FLAGS(0, INTREQ);
- _TX_FLAGS(0, RTSENA);
- _TX_FLAGS(1, NOACK);
-
-#undef _TX_FLAGS
-
- /*
- * WEP crap
- */
- if (key_index != AR5K_TXKEYIX_INVALID) {
- tx_ctl->tx_control_0 |=
- AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
- tx_ctl->tx_control_1 |=
- AR5K_REG_SM(key_index,
- AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
- }
-
- /*
- * RTS/CTS Duration [5210 ?]
- */
- if ((ah->ah_version == AR5K_AR5210) &&
- (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)))
- tx_ctl->tx_control_1 |= rtscts_duration &
- AR5K_2W_TX_DESC_CTL1_RTS_DURATION;
-
- return 0;
-}
-
-/*
- * Initialize the 4-word tx descriptor on 5212
- */
-static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
- struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len,
- enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0,
- unsigned int tx_tries0, unsigned int key_index,
- unsigned int antenna_mode, unsigned int flags, unsigned int rtscts_rate,
- unsigned int rtscts_duration)
-{
- struct ath5k_hw_4w_tx_ctl *tx_ctl;
- unsigned int frame_len;
-
- ATH5K_TRACE(ah->ah_sc);
- tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
-
- /*
- * Validate input
- * - Zero retries don't make sense.
- * - A zero rate will put the HW into a mode where it continously sends
- * noise on the channel, so it is important to avoid this.
- */
- if (unlikely(tx_tries0 == 0)) {
- ATH5K_ERR(ah->ah_sc, "zero retries\n");
- WARN_ON(1);
- return -EINVAL;
- }
- if (unlikely(tx_rate0 == 0)) {
- ATH5K_ERR(ah->ah_sc, "zero rate\n");
- WARN_ON(1);
- return -EINVAL;
- }
-
- /* Clear descriptor */
- memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
-
- /* Setup control descriptor */
-
- /* Verify and set frame length */
-
- /* remove padding we might have added before */
- frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
-
- if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
- return -EINVAL;
-
- tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
-
- /* Verify and set buffer length */
-
- /* NB: beacon's BufLen must be a multiple of 4 bytes */
- if(type == AR5K_PKT_TYPE_BEACON)
- pkt_len = roundup(pkt_len, 4);
-
- if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
- return -EINVAL;
-
- tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
-
- tx_ctl->tx_control_0 |=
- AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
- AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
- tx_ctl->tx_control_1 |= AR5K_REG_SM(type,
- AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
- tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES,
- AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
- tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
-
-#define _TX_FLAGS(_c, _flag) \
- if (flags & AR5K_TXDESC_##_flag) \
- tx_ctl->tx_control_##_c |= \
- AR5K_4W_TX_DESC_CTL##_c##_##_flag
-
- _TX_FLAGS(0, CLRDMASK);
- _TX_FLAGS(0, VEOL);
- _TX_FLAGS(0, INTREQ);
- _TX_FLAGS(0, RTSENA);
- _TX_FLAGS(0, CTSENA);
- _TX_FLAGS(1, NOACK);
-
-#undef _TX_FLAGS
-
- /*
- * WEP crap
- */
- if (key_index != AR5K_TXKEYIX_INVALID) {
- tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
- tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index,
- AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
- }
-
- /*
- * RTS/CTS
- */
- if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) {
- if ((flags & AR5K_TXDESC_RTSENA) &&
- (flags & AR5K_TXDESC_CTSENA))
- return -EINVAL;
- tx_ctl->tx_control_2 |= rtscts_duration &
- AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
- tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate,
- AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE);
- }
-
- return 0;
-}
-
-/*
- * Initialize a 4-word multirate tx descriptor on 5212
- */
-static int
-ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
- unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2,
- unsigned int tx_rate3, u_int tx_tries3)
-{
- struct ath5k_hw_4w_tx_ctl *tx_ctl;
-
- /*
- * Rates can be 0 as long as the retry count is 0 too.
- * A zero rate and nonzero retry count will put the HW into a mode where
- * it continously sends noise on the channel, so it is important to
- * avoid this.
- */
- if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
- (tx_rate2 == 0 && tx_tries2 != 0) ||
- (tx_rate3 == 0 && tx_tries3 != 0))) {
- ATH5K_ERR(ah->ah_sc, "zero rate\n");
- WARN_ON(1);
- return -EINVAL;
- }
-
- if (ah->ah_version == AR5K_AR5212) {
- tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
-
-#define _XTX_TRIES(_n) \
- if (tx_tries##_n) { \
- tx_ctl->tx_control_2 |= \
- AR5K_REG_SM(tx_tries##_n, \
- AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \
- tx_ctl->tx_control_3 |= \
- AR5K_REG_SM(tx_rate##_n, \
- AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \
- }
-
- _XTX_TRIES(1);
- _XTX_TRIES(2);
- _XTX_TRIES(3);
-
-#undef _XTX_TRIES
-
- return 1;
- }
-
- return 0;
-}
-
-/*
- * Proccess the tx status descriptor on 5210/5211
- */
-static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
- struct ath5k_desc *desc, struct ath5k_tx_status *ts)
-{
- struct ath5k_hw_2w_tx_ctl *tx_ctl;
- struct ath5k_hw_tx_status *tx_status;
-
- ATH5K_TRACE(ah->ah_sc);
-
- tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
- tx_status = &desc->ud.ds_tx5210.tx_stat;
-
- /* No frame has been send or error */
- if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
- return -EINPROGRESS;
-
- /*
- * Get descriptor status
- */
- ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
- AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
- ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
- AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
- ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
- AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
- /*TODO: ts->ts_virtcol + test*/
- ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
- AR5K_DESC_TX_STATUS1_SEQ_NUM);
- ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
- AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
- ts->ts_antenna = 1;
- ts->ts_status = 0;
- ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0,
- AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
-
- if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){
- if (tx_status->tx_status_0 &
- AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
- ts->ts_status |= AR5K_TXERR_XRETRY;
-
- if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
- ts->ts_status |= AR5K_TXERR_FIFO;
-
- if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
- ts->ts_status |= AR5K_TXERR_FILT;
- }
-
- return 0;
-}
-
-/*
- * Proccess a tx descriptor on 5212
- */
-static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
- struct ath5k_desc *desc, struct ath5k_tx_status *ts)
-{
- struct ath5k_hw_4w_tx_ctl *tx_ctl;
- struct ath5k_hw_tx_status *tx_status;
-
- ATH5K_TRACE(ah->ah_sc);
-
- tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
- tx_status = &desc->ud.ds_tx5212.tx_stat;
-
- /* No frame has been send or error */
- if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
- return -EINPROGRESS;
-
- /*
- * Get descriptor status
- */
- ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
- AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
- ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
- AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
- ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
- AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
- ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
- AR5K_DESC_TX_STATUS1_SEQ_NUM);
- ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
- AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
- ts->ts_antenna = (tx_status->tx_status_1 &
- AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1;
- ts->ts_status = 0;
-
- switch (AR5K_REG_MS(tx_status->tx_status_1,
- AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) {
- case 0:
- ts->ts_rate = tx_ctl->tx_control_3 &
- AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
- break;
- case 1:
- ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
- AR5K_4W_TX_DESC_CTL3_XMIT_RATE1);
- ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
- AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
- break;
- case 2:
- ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
- AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
- ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
- AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
- break;
- case 3:
- ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
- AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
- ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
- AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3);
- break;
- }
-
- if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){
- if (tx_status->tx_status_0 &
- AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
- ts->ts_status |= AR5K_TXERR_XRETRY;
-
- if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
- ts->ts_status |= AR5K_TXERR_FIFO;
-
- if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
- ts->ts_status |= AR5K_TXERR_FILT;
- }
-
- return 0;
-}
-
-/*
- * RX Descriptor
- */
-
-/*
- * Initialize an rx descriptor
- */
-int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
- u32 size, unsigned int flags)
-{
- struct ath5k_hw_rx_ctl *rx_ctl;
-
- ATH5K_TRACE(ah->ah_sc);
- rx_ctl = &desc->ud.ds_rx.rx_ctl;
-
- /*
- * Clear the descriptor
- * If we don't clean the status descriptor,
- * while scanning we get too many results,
- * most of them virtual, after some secs
- * of scanning system hangs. M.F.
- */
- memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc));
-
- /* Setup descriptor */
- rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN;
- if (unlikely(rx_ctl->rx_control_1 != size))
- return -EINVAL;
-
- if (flags & AR5K_RXDESC_INTREQ)
- rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ;
-
- return 0;
-}
-
-/*
- * Proccess the rx status descriptor on 5210/5211
- */
-static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
- struct ath5k_desc *desc, struct ath5k_rx_status *rs)
-{
- struct ath5k_hw_rx_status *rx_status;
-
- rx_status = &desc->ud.ds_rx.u.rx_stat;
-
- /* No frame received / not ready */
- if (unlikely((rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_DONE)
- == 0))
- return -EINPROGRESS;
-
- /*
- * Frame receive status
- */
- rs->rs_datalen = rx_status->rx_status_0 &
- AR5K_5210_RX_DESC_STATUS0_DATA_LEN;
- rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
- AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL);
- rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
- AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE);
- rs->rs_antenna = rx_status->rx_status_0 &
- AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA;
- rs->rs_more = rx_status->rx_status_0 &
- AR5K_5210_RX_DESC_STATUS0_MORE;
- /* TODO: this timestamp is 13 bit, later on we assume 15 bit */
- rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
- AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
- rs->rs_status = 0;
- rs->rs_phyerr = 0;
-
- /*
- * Key table status
- */
- if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID)
- rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
- AR5K_5210_RX_DESC_STATUS1_KEY_INDEX);
- else
- rs->rs_keyix = AR5K_RXKEYIX_INVALID;
-
- /*
- * Receive/descriptor errors
- */
- if ((rx_status->rx_status_1 &
- AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) {
- if (rx_status->rx_status_1 &
- AR5K_5210_RX_DESC_STATUS1_CRC_ERROR)
- rs->rs_status |= AR5K_RXERR_CRC;
-
- if (rx_status->rx_status_1 &
- AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN)
- rs->rs_status |= AR5K_RXERR_FIFO;
-
- if (rx_status->rx_status_1 &
- AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
- rs->rs_status |= AR5K_RXERR_PHY;
- rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
- AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
- }
-
- if (rx_status->rx_status_1 &
- AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
- rs->rs_status |= AR5K_RXERR_DECRYPT;
- }
-
- return 0;
-}
-
-/*
- * Proccess the rx status descriptor on 5212
- */
-static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
- struct ath5k_desc *desc, struct ath5k_rx_status *rs)
-{
- struct ath5k_hw_rx_status *rx_status;
- struct ath5k_hw_rx_error *rx_err;
-
- ATH5K_TRACE(ah->ah_sc);
- rx_status = &desc->ud.ds_rx.u.rx_stat;
-
- /* Overlay on error */
- rx_err = &desc->ud.ds_rx.u.rx_err;
-
- /* No frame received / not ready */
- if (unlikely((rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_DONE)
- == 0))
- return -EINPROGRESS;
-
- /*
- * Frame receive status
- */
- rs->rs_datalen = rx_status->rx_status_0 &
- AR5K_5212_RX_DESC_STATUS0_DATA_LEN;
- rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
- AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL);
- rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
- AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE);
- rs->rs_antenna = rx_status->rx_status_0 &
- AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA;
- rs->rs_more = rx_status->rx_status_0 &
- AR5K_5212_RX_DESC_STATUS0_MORE;
- rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
- AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
- rs->rs_status = 0;
- rs->rs_phyerr = 0;
-
- /*
- * Key table status
- */
- if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID)
- rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
- AR5K_5212_RX_DESC_STATUS1_KEY_INDEX);
- else
- rs->rs_keyix = AR5K_RXKEYIX_INVALID;
-
- /*
- * Receive/descriptor errors
- */
- if ((rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) {
- if (rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_CRC_ERROR)
- rs->rs_status |= AR5K_RXERR_CRC;
-
- if (rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
- rs->rs_status |= AR5K_RXERR_PHY;
- rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
- AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
- }
-
- if (rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
- rs->rs_status |= AR5K_RXERR_DECRYPT;
-
- if (rx_status->rx_status_1 &
- AR5K_5212_RX_DESC_STATUS1_MIC_ERROR)
- rs->rs_status |= AR5K_RXERR_MIC;
- }
-
- return 0;
-}
-
-
-/****************\
- GPIO Functions
-\****************/
-
-/*
- * Set led state
- */
-void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
-{
- u32 led;
- /*5210 has different led mode handling*/
- u32 led_5210;
-
- ATH5K_TRACE(ah->ah_sc);
-
- /*Reset led status*/
- if (ah->ah_version != AR5K_AR5210)
- AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
- AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED);
- else
- AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED);
-
- /*
- * Some blinking values, define at your wish
- */
- switch (state) {
- case AR5K_LED_SCAN:
- case AR5K_LED_AUTH:
- led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
- led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
- break;
-
- case AR5K_LED_INIT:
- led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
- led_5210 = AR5K_PCICFG_LED_PEND;
- break;
-
- case AR5K_LED_ASSOC:
- case AR5K_LED_RUN:
- led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
- led_5210 = AR5K_PCICFG_LED_ASSOC;
- break;
-
- default:
- led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
- led_5210 = AR5K_PCICFG_LED_PEND;
- break;
- }
-
- /*Write new status to the register*/
- if (ah->ah_version != AR5K_AR5210)
- AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led);
- else
- AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
-}
-
-/*
- * Set GPIO outputs
- */
-int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
-{
- ATH5K_TRACE(ah->ah_sc);
- if (gpio > AR5K_NUM_GPIO)
- return -EINVAL;
-
- ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~
- AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR);
-
- return 0;
-}
-
-/*
- * Set GPIO inputs
- */
-int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
-{
- ATH5K_TRACE(ah->ah_sc);
- if (gpio > AR5K_NUM_GPIO)
- return -EINVAL;
-
- ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~
- AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR);
-
- return 0;
-}
-
-/*
- * Get GPIO state
- */
-u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
-{
- ATH5K_TRACE(ah->ah_sc);
- if (gpio > AR5K_NUM_GPIO)
- return 0xffffffff;
-
- /* GPIO input magic */
- return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) &
- 0x1;
-}
-
-/*
- * Set GPIO state
- */
-int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
-{
- u32 data;
- ATH5K_TRACE(ah->ah_sc);
-
- if (gpio > AR5K_NUM_GPIO)
- return -EINVAL;
-
- /* GPIO output magic */
- data = ath5k_hw_reg_read(ah, AR5K_GPIODO);
-
- data &= ~(1 << gpio);
- data |= (val & 1) << gpio;
-
- ath5k_hw_reg_write(ah, data, AR5K_GPIODO);
-
- return 0;
-}
-
-/*
- * Initialize the GPIO interrupt (RFKill switch)
- */
-void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
- u32 interrupt_level)
-{
- u32 data;
-
- ATH5K_TRACE(ah->ah_sc);
- if (gpio > AR5K_NUM_GPIO)
- return;
-
- /*
- * Set the GPIO interrupt
- */
- data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &
- ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH |
- AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) |
- (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA);
-
- ath5k_hw_reg_write(ah, interrupt_level ? data :
- (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR);
-
- ah->ah_imr |= AR5K_IMR_GPIO;
-
- /* Enable GPIO interrupts */
- AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO);
-}
-
-
-
-
-/****************\
- Misc functions
-\****************/
-
-int ath5k_hw_get_capability(struct ath5k_hw *ah,
- enum ath5k_capability_type cap_type,
- u32 capability, u32 *result)
-{
- ATH5K_TRACE(ah->ah_sc);
-
- switch (cap_type) {
- case AR5K_CAP_NUM_TXQUEUES:
- if (result) {
- if (ah->ah_version == AR5K_AR5210)
- *result = AR5K_NUM_TX_QUEUES_NOQCU;
- else
- *result = AR5K_NUM_TX_QUEUES;
- goto yes;
- }
- case AR5K_CAP_VEOL:
- goto yes;
- case AR5K_CAP_COMPRESSION:
- if (ah->ah_version == AR5K_AR5212)
- goto yes;
- else
- goto no;
- case AR5K_CAP_BURST:
- goto yes;
- case AR5K_CAP_TPC:
- goto yes;
- case AR5K_CAP_BSSIDMASK:
- if (ah->ah_version == AR5K_AR5212)
- goto yes;
- else
- goto no;
- case AR5K_CAP_XR:
- if (ah->ah_version == AR5K_AR5212)
- goto yes;
- else
- goto no;
- default:
- goto no;
- }
-
-no:
- return -EINVAL;
-yes:
- return 0;
-}
-
-static int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid,
- u16 assoc_id)
-{
- ATH5K_TRACE(ah->ah_sc);
-
- if (ah->ah_version == AR5K_AR5210) {
- AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
- AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
- return 0;
- }
-
- return -EIO;
-}
-
-static int ath5k_hw_disable_pspoll(struct ath5k_hw *ah)
-{
- ATH5K_TRACE(ah->ah_sc);
-
- if (ah->ah_version == AR5K_AR5210) {
- AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
- AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
- return 0;
- }
-
- return -EIO;
-}
diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c
index 2806b21bf90b..ea2e1a20b499 100644
--- a/drivers/net/wireless/ath5k/initvals.c
+++ b/drivers/net/wireless/ath5k/initvals.c
@@ -1,9 +1,9 @@
/*
* Initial register settings functions
*
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -20,13 +20,9 @@
*/
#include "ath5k.h"
-#include "base.h"
#include "reg.h"
-
-/*
- * MAC/PHY REGISTERS
- */
-
+#include "debug.h"
+#include "base.h"
/*
* Mode-independent initial register writes
@@ -65,10 +61,10 @@ static const struct ath5k_ini ar5210_ini[] = {
{ AR5K_TXCFG, AR5K_DMASIZE_128B },
{ AR5K_RXCFG, AR5K_DMASIZE_128B },
{ AR5K_CFG, AR5K_INIT_CFG },
- { AR5K_TOPS, AR5K_INIT_TOPS },
- { AR5K_RXNOFRM, AR5K_INIT_RXNOFRM },
- { AR5K_RPGTO, AR5K_INIT_RPGTO },
- { AR5K_TXNOFRM, AR5K_INIT_TXNOFRM },
+ { AR5K_TOPS, 8 },
+ { AR5K_RXNOFRM, 8 },
+ { AR5K_RPGTO, 0 },
+ { AR5K_TXNOFRM, 0 },
{ AR5K_SFR, 0 },
{ AR5K_MIBC, 0 },
{ AR5K_MISC, 0 },
diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c
new file mode 100644
index 000000000000..a47df9a24aa1
--- /dev/null
+++ b/drivers/net/wireless/ath5k/pcu.c
@@ -0,0 +1,1014 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*********************************\
+* Protocol Control Unit Functions *
+\*********************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*******************\
+* Generic functions *
+\*******************/
+
+/**
+ * ath5k_hw_set_opmode - Set PCU operating mode
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Initialize PCU for the various operating modes (AP/STA etc)
+ *
+ * NOTE: ah->ah_op_mode must be set before calling this.
+ */
+int ath5k_hw_set_opmode(struct ath5k_hw *ah)
+{
+ u32 pcu_reg, beacon_reg, low_id, high_id;
+
+ pcu_reg = 0;
+ beacon_reg = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ switch (ah->ah_op_mode) {
+ case NL80211_IFTYPE_ADHOC:
+ pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA |
+ (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_NO_PSPOLL : 0);
+ beacon_reg |= AR5K_BCR_ADHOC;
+ break;
+
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
+ pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
+ (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_NO_PSPOLL : 0);
+ beacon_reg |= AR5K_BCR_AP;
+ break;
+
+ case NL80211_IFTYPE_STATION:
+ pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
+ (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_PWR_SV : 0);
+ case NL80211_IFTYPE_MONITOR:
+ pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
+ (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_NO_PSPOLL : 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Set PCU registers
+ */
+ low_id = AR5K_LOW_ID(ah->ah_sta_id);
+ high_id = AR5K_HIGH_ID(ah->ah_sta_id);
+ ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+ /*
+ * Set Beacon Control Register on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_update - Update mib counters (mac layer statistics)
+ *
+ * @ah: The &struct ath5k_hw
+ * @stats: The &struct ieee80211_low_level_stats we use to track
+ * statistics on the driver
+ *
+ * Reads MIB counters from PCU and updates sw statistics. Must be
+ * called after a MIB interrupt.
+ */
+void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
+ struct ieee80211_low_level_stats *stats)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Read-And-Clear */
+ stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
+ stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
+ stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
+ stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
+
+ /* XXX: Should we use this to track beacon count ?
+ * -we read it anyway to clear the register */
+ ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
+
+ /* Reset profile count registers on 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
+ }
+}
+
+/**
+ * ath5k_hw_set_ack_bitrate - set bitrate for ACKs
+ *
+ * @ah: The &struct ath5k_hw
+ * @high: Flag to determine if we want to use high transmition rate
+ * for ACKs or not
+ *
+ * If high flag is set, we tell hw to use a set of control rates based on
+ * the current transmition rate (check out control_rates array inside reset.c).
+ * If not hw just uses the lowest rate available for the current modulation
+ * scheme being used (1Mbit for CCK and 6Mbits for OFDM).
+ */
+void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
+{
+ if (ah->ah_version != AR5K_AR5212)
+ return;
+ else {
+ u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
+ if (high)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+ }
+}
+
+
+/******************\
+* ACK/CTS Timeouts *
+\******************/
+
+/**
+ * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+ AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
+}
+
+/**
+ * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU
+ *
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
+ ah->ah_turbo) <= timeout)
+ return -EINVAL;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
+ ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+ AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
+}
+
+/**
+ * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU
+ *
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
+ ah->ah_turbo) <= timeout)
+ return -EINVAL;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
+ ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+ return 0;
+}
+
+
+/****************\
+* BSSID handling *
+\****************/
+
+/**
+ * ath5k_hw_get_lladdr - Get station id
+ *
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address
+ *
+ * Initialize ah->ah_sta_id using the mac address provided
+ * (just a memcpy).
+ *
+ * TODO: Remove it once we merge ath5k_softc and ath5k_hw
+ */
+void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ memcpy(mac, ah->ah_sta_id, ETH_ALEN);
+}
+
+/**
+ * ath5k_hw_set_lladdr - Set station id
+ *
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address
+ *
+ * Set station id on hw using the provided mac address
+ */
+int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
+{
+ u32 low_id, high_id;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Set new station ID */
+ memcpy(ah->ah_sta_id, mac, ETH_ALEN);
+
+ low_id = AR5K_LOW_ID(mac);
+ high_id = AR5K_HIGH_ID(mac);
+
+ ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_associd - Set BSSID for association
+ *
+ * @ah: The &struct ath5k_hw
+ * @bssid: BSSID
+ * @assoc_id: Assoc id
+ *
+ * Sets the BSSID which trigers the "SME Join" operation
+ */
+void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
+{
+ u32 low_id, high_id;
+ u16 tim_offset = 0;
+
+ /*
+ * Set simple BSSID mask on 5212
+ */
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0);
+ ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1);
+ }
+
+ /*
+ * Set BSSID which triggers the "SME Join" operation
+ */
+ low_id = AR5K_LOW_ID(bssid);
+ high_id = AR5K_HIGH_ID(bssid);
+ ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
+ ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
+ AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
+
+ if (assoc_id == 0) {
+ ath5k_hw_disable_pspoll(ah);
+ return;
+ }
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
+ tim_offset ? tim_offset + 4 : 0);
+
+ ath5k_hw_enable_pspoll(ah, NULL, 0);
+}
+
+/**
+ * ath5k_hw_set_bssid_mask - filter out bssids we listen
+ *
+ * @ah: the &struct ath5k_hw
+ * @mask: the bssid_mask, a u8 array of size ETH_ALEN
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * NOTE: This is a simple filter and does *not* filter out all
+ * relevant frames. Some frames that are not for us might get ACKed from us
+ * by PCU because they just match the mask.
+ *
+ * When handling multiple BSSes you can get the BSSID mask by computing the
+ * set of ~ ( MAC XOR BSSID ) for all bssids we handle.
+ *
+ * When you do this you are essentially computing the common bits of all your
+ * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
+ * the MAC address to obtain the relevant bits and compare the result with
+ * (frame's BSSID & mask) to see if they match.
+ */
+/*
+ * Simple example: on your card you have have two BSSes you have created with
+ * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
+ * There is another BSSID-03 but you are not part of it. For simplicity's sake,
+ * assuming only 4 bits for a mac address and for BSSIDs you can then have:
+ *
+ * \
+ * MAC: 0001 |
+ * BSSID-01: 0100 | --> Belongs to us
+ * BSSID-02: 1001 |
+ * /
+ * -------------------
+ * BSSID-03: 0110 | --> External
+ * -------------------
+ *
+ * Our bssid_mask would then be:
+ *
+ * On loop iteration for BSSID-01:
+ * ~(0001 ^ 0100) -> ~(0101)
+ * -> 1010
+ * bssid_mask = 1010
+ *
+ * On loop iteration for BSSID-02:
+ * bssid_mask &= ~(0001 ^ 1001)
+ * bssid_mask = (1010) & ~(0001 ^ 1001)
+ * bssid_mask = (1010) & ~(1001)
+ * bssid_mask = (1010) & (0110)
+ * bssid_mask = 0010
+ *
+ * A bssid_mask of 0010 means "only pay attention to the second least
+ * significant bit". This is because its the only bit common
+ * amongst the MAC and all BSSIDs we support. To findout what the real
+ * common bit is we can simply "&" the bssid_mask now with any BSSID we have
+ * or our MAC address (we assume the hardware uses the MAC address).
+ *
+ * Now, suppose there's an incoming frame for BSSID-03:
+ *
+ * IFRAME-01: 0110
+ *
+ * An easy eye-inspeciton of this already should tell you that this frame
+ * will not pass our check. This is beacuse the bssid_mask tells the
+ * hardware to only look at the second least significant bit and the
+ * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
+ * as 1, which does not match 0.
+ *
+ * So with IFRAME-01 we *assume* the hardware will do:
+ *
+ * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
+ * --> allow = (0010) == 0000 ? 1 : 0;
+ * --> allow = 0
+ *
+ * Lets now test a frame that should work:
+ *
+ * IFRAME-02: 0001 (we should allow)
+ *
+ * allow = (0001 & 1010) == 1010
+ *
+ * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0;
+ * --> allow = (0010) == (0010)
+ * --> allow = 1
+ *
+ * Other examples:
+ *
+ * IFRAME-03: 0100 --> allowed
+ * IFRAME-04: 1001 --> allowed
+ * IFRAME-05: 1101 --> allowed but its not for us!!!
+ *
+ */
+int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+{
+ u32 low_id, high_id;
+ ATH5K_TRACE(ah->ah_sc);
+
+ if (ah->ah_version == AR5K_AR5212) {
+ low_id = AR5K_LOW_ID(mask);
+ high_id = AR5K_HIGH_ID(mask);
+
+ ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
+ ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
+
+ return 0;
+ }
+
+ return -EIO;
+}
+
+
+/************\
+* RX Control *
+\************/
+
+/**
+ * ath5k_hw_start_rx_pcu - Start RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Starts RX engine on PCU so that hw can process RXed frames
+ * (ACK etc).
+ *
+ * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
+ * TODO: Init ANI here
+ */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * at5k_hw_stop_rx_pcu - Stop RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Stops RX engine on PCU
+ *
+ * TODO: Detach ANI here
+ */
+void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/*
+ * Set multicast filter
+ */
+void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ /* Set the multicat filter */
+ ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
+ ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
+}
+
+/*
+ * Set multicast filter by index
+ */
+int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+ ATH5K_TRACE(ah->ah_sc);
+ if (index >= 64)
+ return -EINVAL;
+ else if (index >= 32)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1,
+ (1 << (index - 32)));
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+ return 0;
+}
+
+/*
+ * Clear Multicast filter by index
+ */
+int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+ ATH5K_TRACE(ah->ah_sc);
+ if (index >= 64)
+ return -EINVAL;
+ else if (index >= 32)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1,
+ (1 << (index - 32)));
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_get_rx_filter - Get current rx filter
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the RX filter by reading rx filter and
+ * phy error filter registers. RX filter is used
+ * to set the allowed frame types that PCU will accept
+ * and pass to the driver. For a list of frame types
+ * check out reg.h.
+ */
+u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
+{
+ u32 data, filter = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+ filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
+
+ /*Radar detection for 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
+
+ if (data & AR5K_PHY_ERR_FIL_RADAR)
+ filter |= AR5K_RX_FILTER_RADARERR;
+ if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
+ filter |= AR5K_RX_FILTER_PHYERR;
+ }
+
+ return filter;
+}
+
+/**
+ * ath5k_hw_set_rx_filter - Set rx filter
+ *
+ * @ah: The &struct ath5k_hw
+ * @filter: RX filter mask (see reg.h)
+ *
+ * Sets RX filter register and also handles PHY error filter
+ * register on 5212 and newer chips so that we have proper PHY
+ * error reporting.
+ */
+void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
+{
+ u32 data = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Set PHY error filter register on 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ if (filter & AR5K_RX_FILTER_RADARERR)
+ data |= AR5K_PHY_ERR_FIL_RADAR;
+ if (filter & AR5K_RX_FILTER_PHYERR)
+ data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
+ }
+
+ /*
+ * The AR5210 uses promiscous mode to detect radar activity
+ */
+ if (ah->ah_version == AR5K_AR5210 &&
+ (filter & AR5K_RX_FILTER_RADARERR)) {
+ filter &= ~AR5K_RX_FILTER_RADARERR;
+ filter |= AR5K_RX_FILTER_PROM;
+ }
+
+ /*Zero length DMA*/
+ if (data)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+
+ /*Write RX Filter register*/
+ ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
+
+ /*Write PHY error filter register on 5212*/
+ if (ah->ah_version == AR5K_AR5212)
+ ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
+
+}
+
+
+/****************\
+* Beacon control *
+\****************/
+
+/**
+ * ath5k_hw_get_tsf32 - Get a 32bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns lower 32 bits of current TSF
+ */
+u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ return ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+}
+
+/**
+ * ath5k_hw_get_tsf64 - Get the full 64bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the current TSF
+ */
+u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
+{
+ u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+ ATH5K_TRACE(ah->ah_sc);
+
+ return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32);
+}
+
+/**
+ * ath5k_hw_reset_tsf - Force a TSF reset
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Forces a TSF reset on PCU
+ */
+void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
+{
+ u32 val;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF;
+
+ /*
+ * Each write to the RESET_TSF bit toggles a hardware internal
+ * signal to reset TSF, but if left high it will cause a TSF reset
+ * on the next chip reset as well. Thus we always write the value
+ * twice to clear the signal.
+ */
+ ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+ ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+}
+
+/*
+ * Initialize beacon timers
+ */
+void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
+{
+ u32 timer1, timer2, timer3;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /*
+ * Set the additional timers by mode
+ */
+ switch (ah->ah_op_mode) {
+ case NL80211_IFTYPE_STATION:
+ if (ah->ah_version == AR5K_AR5210) {
+ timer1 = 0xffffffff;
+ timer2 = 0xffffffff;
+ } else {
+ timer1 = 0x0000ffff;
+ timer2 = 0x0007ffff;
+ }
+ break;
+
+ default:
+ timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
+ timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
+ }
+
+ timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
+
+ /*
+ * Set the beacon register and enable all timers.
+ * (next beacon, DMA beacon, software beacon, ATIM window time)
+ */
+ ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
+ ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
+ ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
+ ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
+
+ ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
+ AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE),
+ AR5K_BEACON);
+}
+
+#if 0
+/*
+ * Set beacon timers
+ */
+int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah,
+ const struct ath5k_beacon_state *state)
+{
+ u32 cfp_period, next_cfp, dtim, interval, next_beacon;
+
+ /*
+ * TODO: should be changed through *state
+ * review struct ath5k_beacon_state struct
+ *
+ * XXX: These are used for cfp period bellow, are they
+ * ok ? Is it O.K. for tsf here to be 0 or should we use
+ * get_tsf ?
+ */
+ u32 dtim_count = 0; /* XXX */
+ u32 cfp_count = 0; /* XXX */
+ u32 tsf = 0; /* XXX */
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Return on an invalid beacon state */
+ if (state->bs_interval < 1)
+ return -EINVAL;
+
+ interval = state->bs_interval;
+ dtim = state->bs_dtim_period;
+
+ /*
+ * PCF support?
+ */
+ if (state->bs_cfp_period > 0) {
+ /*
+ * Enable PCF mode and set the CFP
+ * (Contention Free Period) and timer registers
+ */
+ cfp_period = state->bs_cfp_period * state->bs_dtim_period *
+ state->bs_interval;
+ next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) *
+ state->bs_interval;
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_DEFAULT_ANTENNA |
+ AR5K_STA_ID1_PCF);
+ ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD);
+ ath5k_hw_reg_write(ah, state->bs_cfp_max_duration,
+ AR5K_CFP_DUR);
+ ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period :
+ next_cfp)) << 3, AR5K_TIMER2);
+ } else {
+ /* Disable PCF mode */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_DEFAULT_ANTENNA |
+ AR5K_STA_ID1_PCF);
+ }
+
+ /*
+ * Enable the beacon timer register
+ */
+ ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0);
+
+ /*
+ * Start the beacon timers
+ */
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &
+ ~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) |
+ AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0,
+ AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval,
+ AR5K_BEACON_PERIOD), AR5K_BEACON);
+
+ /*
+ * Write new beacon miss threshold, if it appears to be valid
+ * XXX: Figure out right values for min <= bs_bmiss_threshold <= max
+ * and return if its not in range. We can test this by reading value and
+ * setting value to a largest value and seeing which values register.
+ */
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS,
+ state->bs_bmiss_threshold);
+
+ /*
+ * Set sleep control register
+ * XXX: Didn't find this in 5210 code but since this register
+ * exists also in ar5k's 5210 headers i leave it as common code.
+ */
+ AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR,
+ (state->bs_sleep_duration - 3) << 3);
+
+ /*
+ * Set enhanced sleep registers on 5212
+ */
+ if (ah->ah_version == AR5K_AR5212) {
+ if (state->bs_sleep_duration > state->bs_interval &&
+ roundup(state->bs_sleep_duration, interval) ==
+ state->bs_sleep_duration)
+ interval = state->bs_sleep_duration;
+
+ if (state->bs_sleep_duration > dtim && (dtim == 0 ||
+ roundup(state->bs_sleep_duration, dtim) ==
+ state->bs_sleep_duration))
+ dtim = state->bs_sleep_duration;
+
+ if (interval > dtim)
+ return -EINVAL;
+
+ next_beacon = interval == dtim ? state->bs_next_dtim :
+ state->bs_next_beacon;
+
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM((state->bs_next_dtim - 3) << 3,
+ AR5K_SLEEP0_NEXT_DTIM) |
+ AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) |
+ AR5K_SLEEP0_ENH_SLEEP_EN |
+ AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0);
+
+ ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3,
+ AR5K_SLEEP1_NEXT_TIM) |
+ AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1);
+
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) |
+ AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2);
+ }
+
+ return 0;
+}
+
+/*
+ * Reset beacon timers
+ */
+void ath5k_hw_reset_beacon(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ /*
+ * Disable beacon timer
+ */
+ ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
+
+ /*
+ * Disable some beacon register values
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF);
+ ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON);
+}
+
+/*
+ * Wait for beacon queue to finish
+ */
+int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
+{
+ unsigned int i;
+ int ret;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* 5210 doesn't have QCU*/
+ if (ah->ah_version == AR5K_AR5210) {
+ /*
+ * Wait for beaconn queue to finish by checking
+ * Control Register and Beacon Status Register.
+ */
+ for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) {
+ if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F)
+ ||
+ !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F))
+ break;
+ udelay(10);
+ }
+
+ /* Timeout... */
+ if (i <= 0) {
+ /*
+ * Re-schedule the beacon queue
+ */
+ ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1);
+ ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+ AR5K_BCR);
+
+ return -EIO;
+ }
+ ret = 0;
+ } else {
+ /*5211/5212*/
+ ret = ath5k_hw_register_timeout(ah,
+ AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON),
+ AR5K_QCU_STS_FRMPENDCNT, 0, false);
+
+ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON))
+ return -EIO;
+ }
+
+ return ret;
+}
+#endif
+
+
+/*********************\
+* Key table functions *
+\*********************/
+
+/*
+ * Reset a key entry on the table
+ */
+int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
+{
+ unsigned int i;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+ for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
+ ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
+
+ /*
+ * Set NULL encryption on AR5212+
+ *
+ * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5)
+ * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007
+ *
+ * Note2: Windows driver (ndiswrapper) sets this to
+ * 0x00000714 instead of 0x00000007
+ */
+ if (ah->ah_version > AR5K_AR5211)
+ ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
+ AR5K_KEYTABLE_TYPE(entry));
+
+ return 0;
+}
+
+/*
+ * Check if a table entry is valid
+ */
+int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+ /* Check the validation flag at the end of the entry */
+ return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) &
+ AR5K_KEYTABLE_VALID;
+}
+
+/*
+ * Set a key entry on the table
+ */
+int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
+ const struct ieee80211_key_conf *key, const u8 *mac)
+{
+ unsigned int i;
+ __le32 key_v[5] = {};
+ u32 keytype;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* key->keylen comes in from mac80211 in bytes */
+
+ if (key->keylen > AR5K_KEYTABLE_SIZE / 8)
+ return -EOPNOTSUPP;
+
+ switch (key->keylen) {
+ /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit */
+ case 40 / 8:
+ memcpy(&key_v[0], key->key, 5);
+ keytype = AR5K_KEYTABLE_TYPE_40;
+ break;
+
+ /* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit */
+ case 104 / 8:
+ memcpy(&key_v[0], &key->key[0], 6);
+ memcpy(&key_v[2], &key->key[6], 6);
+ memcpy(&key_v[4], &key->key[12], 1);
+ keytype = AR5K_KEYTABLE_TYPE_104;
+ break;
+ /* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit */
+ case 128 / 8:
+ memcpy(&key_v[0], &key->key[0], 6);
+ memcpy(&key_v[2], &key->key[6], 6);
+ memcpy(&key_v[4], &key->key[12], 4);
+ keytype = AR5K_KEYTABLE_TYPE_128;
+ break;
+
+ default:
+ return -EINVAL; /* shouldn't happen */
+ }
+
+ for (i = 0; i < ARRAY_SIZE(key_v); i++)
+ ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
+ AR5K_KEYTABLE_OFF(entry, i));
+
+ ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry));
+
+ return ath5k_hw_set_key_lladdr(ah, entry, mac);
+}
+
+int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
+{
+ u32 low_id, high_id;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Invalid entry (key table overflow) */
+ AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+ /* MAC may be NULL if it's a broadcast key. In this case no need to
+ * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
+ if (unlikely(mac == NULL)) {
+ low_id = 0xffffffff;
+ high_id = 0xffff | AR5K_KEYTABLE_VALID;
+ } else {
+ low_id = AR5K_LOW_ID(mac);
+ high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
+ }
+
+ ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
+ ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry));
+
+ return 0;
+}
+
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index fa0d47faf574..e43f6563e61a 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -1,9 +1,9 @@
/*
* PHY functions
*
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -19,6 +19,8 @@
*
*/
+#define _ATH5K_PHY
+
#include <linux/delay.h>
#include "ath5k.h"
@@ -2122,7 +2124,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210);
ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210);
- udelay(2300);
+ mdelay(2);
/*
* Set the channel (with AGC turned off)
@@ -2501,3 +2503,5 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power)
return ath5k_hw_txpower(ah, channel, power);
}
+
+#undef _ATH5K_PHY
diff --git a/drivers/net/wireless/ath5k/qcu.c b/drivers/net/wireless/ath5k/qcu.c
new file mode 100644
index 000000000000..01bf09176d23
--- /dev/null
+++ b/drivers/net/wireless/ath5k/qcu.c
@@ -0,0 +1,488 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/********************************************\
+Queue Control Unit, DFS Control Unit Functions
+\********************************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Get properties for a transmit queue
+ */
+int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
+ struct ath5k_txq_info *queue_info)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
+ return 0;
+}
+
+/*
+ * Set properties for a transmit queue
+ */
+int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+ const struct ath5k_txq_info *queue_info)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return -EIO;
+
+ memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info));
+
+ /*XXX: Is this supported on 5210 ?*/
+ if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA &&
+ ((queue_info->tqi_subtype == AR5K_WME_AC_VI) ||
+ (queue_info->tqi_subtype == AR5K_WME_AC_VO))) ||
+ queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD)
+ ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS;
+
+ return 0;
+}
+
+/*
+ * Initialize a transmit queue
+ */
+int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
+ struct ath5k_txq_info *queue_info)
+{
+ unsigned int queue;
+ int ret;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /*
+ * Get queue by type
+ */
+ /*5210 only has 2 queues*/
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (queue_type) {
+ case AR5K_TX_QUEUE_DATA:
+ queue = AR5K_TX_QUEUE_ID_NOQCU_DATA;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ switch (queue_type) {
+ case AR5K_TX_QUEUE_DATA:
+ for (queue = AR5K_TX_QUEUE_ID_DATA_MIN;
+ ah->ah_txq[queue].tqi_type !=
+ AR5K_TX_QUEUE_INACTIVE; queue++) {
+
+ if (queue > AR5K_TX_QUEUE_ID_DATA_MAX)
+ return -EINVAL;
+ }
+ break;
+ case AR5K_TX_QUEUE_UAPSD:
+ queue = AR5K_TX_QUEUE_ID_UAPSD;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ queue = AR5K_TX_QUEUE_ID_BEACON;
+ break;
+ case AR5K_TX_QUEUE_CAB:
+ queue = AR5K_TX_QUEUE_ID_CAB;
+ break;
+ case AR5K_TX_QUEUE_XR_DATA:
+ if (ah->ah_version != AR5K_AR5212)
+ ATH5K_ERR(ah->ah_sc,
+ "XR data queues only supported in"
+ " 5212!\n");
+ queue = AR5K_TX_QUEUE_ID_XR_DATA;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ /*
+ * Setup internal queue structure
+ */
+ memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info));
+ ah->ah_txq[queue].tqi_type = queue_type;
+
+ if (queue_info != NULL) {
+ queue_info->tqi_type = queue_type;
+ ret = ath5k_hw_set_tx_queueprops(ah, queue, queue_info);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * We use ah_txq_status to hold a temp value for
+ * the Secondary interrupt mask registers on 5211+
+ * check out ath5k_hw_reset_tx_queue
+ */
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue);
+
+ return queue;
+}
+
+/*
+ * Get number of pending frames
+ * for a specific queue [5211+]
+ */
+u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /* Return if queue is declared inactive */
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return false;
+
+ /* XXX: How about AR5K_CFG_TXCNT ? */
+ if (ah->ah_version == AR5K_AR5210)
+ return false;
+
+ return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT;
+}
+
+/*
+ * Set a transmit queue inactive
+ */
+void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
+ return;
+
+ /* This queue will be skipped in further operations */
+ ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
+ /*For SIMR setup*/
+ AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
+}
+
+/*
+ * Set DFS properties for a transmit queue on DCU
+ */
+int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+ u32 cw_min, cw_max, retry_lg, retry_sh;
+ struct ath5k_txq_info *tq = &ah->ah_txq[queue];
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ tq = &ah->ah_txq[queue];
+
+ if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return 0;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ /* Only handle data queues, others will be ignored */
+ if (tq->tqi_type != AR5K_TX_QUEUE_DATA)
+ return 0;
+
+ /* Set Slot time */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME,
+ AR5K_SLOT_TIME);
+ /* Set ACK_CTS timeout */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ AR5K_INIT_ACK_CTS_TIMEOUT_TURBO :
+ AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME);
+ /* Set Transmit Latency */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ AR5K_INIT_TRANSMIT_LATENCY_TURBO :
+ AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210);
+
+ /* Set IFS0 */
+ if (ah->ah_turbo) {
+ ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO +
+ (ah->ah_aifs + tq->tqi_aifs) *
+ AR5K_INIT_SLOT_TIME_TURBO) <<
+ AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO,
+ AR5K_IFS0);
+ } else {
+ ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS +
+ (ah->ah_aifs + tq->tqi_aifs) *
+ AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) |
+ AR5K_INIT_SIFS, AR5K_IFS0);
+ }
+
+ /* Set IFS1 */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
+ AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
+ /* Set AR5K_PHY_SETTLING */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+ | 0x38 :
+ (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+ | 0x1C,
+ AR5K_PHY_SETTLING);
+ /* Set Frame Control Register */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
+ AR5K_PHY_TURBO_SHORT | 0x2020) :
+ (AR5K_PHY_FRAME_CTL_INI | 0x1020),
+ AR5K_PHY_FRAME_CTL_5210);
+ }
+
+ /*
+ * Calculate cwmin/max by channel mode
+ */
+ cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN;
+ cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX;
+ ah->ah_aifs = AR5K_TUNE_AIFS;
+ /*XR is only supported on 5212*/
+ if (IS_CHAN_XR(ah->ah_current_channel) &&
+ ah->ah_version == AR5K_AR5212) {
+ cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR;
+ cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR;
+ ah->ah_aifs = AR5K_TUNE_AIFS_XR;
+ /*B mode is not supported on 5210*/
+ } else if (IS_CHAN_B(ah->ah_current_channel) &&
+ ah->ah_version != AR5K_AR5210) {
+ cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B;
+ cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B;
+ ah->ah_aifs = AR5K_TUNE_AIFS_11B;
+ }
+
+ cw_min = 1;
+ while (cw_min < ah->ah_cw_min)
+ cw_min = (cw_min << 1) | 1;
+
+ cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) :
+ ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1);
+ cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) :
+ ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1);
+
+ /*
+ * Calculate and set retry limits
+ */
+ if (ah->ah_software_retry) {
+ /* XXX Need to test this */
+ retry_lg = ah->ah_limit_tx_retries;
+ retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ?
+ AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg;
+ } else {
+ retry_lg = AR5K_INIT_LG_RETRY;
+ retry_sh = AR5K_INIT_SH_RETRY;
+ }
+
+ /*No QCU/DCU [5210]*/
+ if (ah->ah_version == AR5K_AR5210) {
+ ath5k_hw_reg_write(ah,
+ (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S)
+ | AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
+ AR5K_NODCU_RETRY_LMT_SLG_RETRY)
+ | AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
+ AR5K_NODCU_RETRY_LMT_SSH_RETRY)
+ | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY)
+ | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY),
+ AR5K_NODCU_RETRY_LMT);
+ } else {
+ /*QCU/DCU [5211+]*/
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
+ AR5K_DCU_RETRY_LMT_SLG_RETRY) |
+ AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
+ AR5K_DCU_RETRY_LMT_SSH_RETRY) |
+ AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) |
+ AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY),
+ AR5K_QUEUE_DFS_RETRY_LIMIT(queue));
+
+ /*===Rest is also for QCU/DCU only [5211+]===*/
+
+ /*
+ * Set initial content window (cw_min/cw_max)
+ * and arbitrated interframe space (aifs)...
+ */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
+ AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
+ AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs,
+ AR5K_DCU_LCL_IFS_AIFS),
+ AR5K_QUEUE_DFS_LOCAL_IFS(queue));
+
+ /*
+ * Set misc registers
+ */
+ ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY,
+ AR5K_QUEUE_MISC(queue));
+
+ if (tq->tqi_cbr_period) {
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
+ AR5K_QCU_CBRCFG_INTVAL) |
+ AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
+ AR5K_QCU_CBRCFG_ORN_THRES),
+ AR5K_QUEUE_CBRCFG(queue));
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_FRSHED_CBR);
+ if (tq->tqi_cbr_overflow_limit)
+ AR5K_REG_ENABLE_BITS(ah,
+ AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_CBR_THRES_ENABLE);
+ }
+
+ if (tq->tqi_ready_time)
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
+ AR5K_QCU_RDYTIMECFG_INTVAL) |
+ AR5K_QCU_RDYTIMECFG_ENABLE,
+ AR5K_QUEUE_RDYTIMECFG(queue));
+
+ if (tq->tqi_burst_time) {
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
+ AR5K_DCU_CHAN_TIME_DUR) |
+ AR5K_DCU_CHAN_TIME_ENABLE,
+ AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
+
+ if (tq->tqi_flags
+ & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
+ AR5K_REG_ENABLE_BITS(ah,
+ AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_RDY_VEOL_POLICY);
+ }
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
+ ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
+ AR5K_QUEUE_DFS_MISC(queue));
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
+ ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
+ AR5K_QUEUE_DFS_MISC(queue));
+
+ /*
+ * Set registers by queue type
+ */
+ switch (tq->tqi_type) {
+ case AR5K_TX_QUEUE_BEACON:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_FRSHED_DBA_GT |
+ AR5K_QCU_MISC_CBREXP_BCN_DIS |
+ AR5K_QCU_MISC_BCN_ENABLE);
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+ AR5K_DCU_MISC_ARBLOCK_CTL_S) |
+ AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
+ AR5K_DCU_MISC_BCN_ENABLE);
+
+ ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
+ (AR5K_TUNE_SW_BEACON_RESP -
+ AR5K_TUNE_DMA_BEACON_RESP) -
+ AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
+ AR5K_QCU_RDYTIMECFG_ENABLE,
+ AR5K_QUEUE_RDYTIMECFG(queue));
+ break;
+
+ case AR5K_TX_QUEUE_CAB:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_FRSHED_DBA_GT |
+ AR5K_QCU_MISC_CBREXP_DIS |
+ AR5K_QCU_MISC_CBREXP_BCN_DIS);
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+ AR5K_DCU_MISC_ARBLOCK_CTL_S));
+ break;
+
+ case AR5K_TX_QUEUE_UAPSD:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_CBREXP_DIS);
+ break;
+
+ case AR5K_TX_QUEUE_DATA:
+ default:
+ break;
+ }
+
+ /*
+ * Enable interrupts for this tx queue
+ * in the secondary interrupt mask registers
+ */
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
+
+
+ /* Update secondary interrupt mask registers */
+ ah->ah_txq_imr_txok &= ah->ah_txq_status;
+ ah->ah_txq_imr_txerr &= ah->ah_txq_status;
+ ah->ah_txq_imr_txurn &= ah->ah_txq_status;
+ ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
+ ah->ah_txq_imr_txeol &= ah->ah_txq_status;
+
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
+ AR5K_SIMR0_QCU_TXOK) |
+ AR5K_REG_SM(ah->ah_txq_imr_txdesc,
+ AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0);
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
+ AR5K_SIMR1_QCU_TXERR) |
+ AR5K_REG_SM(ah->ah_txq_imr_txeol,
+ AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1);
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn,
+ AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2);
+ }
+
+ return 0;
+}
+
+/*
+ * Get slot time from DCU
+ */
+unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (ah->ah_version == AR5K_AR5210)
+ return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah,
+ AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo);
+ else
+ return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff;
+}
+
+/*
+ * Set slot time on DCU
+ */
+int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX)
+ return -EINVAL;
+
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time,
+ ah->ah_turbo), AR5K_SLOT_TIME);
+ else
+ ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT);
+
+ return 0;
+}
+
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 7562bf173d3e..e557fe178bbf 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -1,7 +1,7 @@
/*
- * Copyright (c) 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2007 Michael Taylor <mike.taylor@apprion.com>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -29,6 +29,10 @@
* http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
*
* 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
+ *
+ * This file also contains register values found on a memory dump of
+ * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
+ * released by Atheros and on various debug messages found on the net.
*/
@@ -295,7 +299,7 @@
#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */
#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */
#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */
-#define AR5K_ISR_BRSSI 0x00020000
+#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */
#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
@@ -303,46 +307,56 @@
#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */
#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */
#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */
-#define AR5K_ISR_TIM 0x00800000 /* [5210] */
-#define AR5K_ISR_BCNMISC 0x00800000 /* [5212+] */
-#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill)*/
-#define AR5K_ISR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */
-#define AR5K_ISR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */
-#define AR5K_ISR_QTRIG 0x08000000 /* [5211+] */
+#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
+#define AR5K_ISR_TIM 0x00800000 /* [5211+] */
+#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */
+#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */
+#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */
+#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
/*
* Secondary status registers [5211+] (0 - 4)
*
- * I guess from the names that these give the status for each
- * queue, that's why only masks are defined here, haven't got
- * any info about them (couldn't find them anywhere in ar5k code).
+ * These give the status for each QCU, only QCUs 0-9 are
+ * represented.
*/
#define AR5K_SISR0 0x0084 /* Register Address [5211+] */
#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */
+#define AR5K_SISR0_QCU_TXOK_S 0
#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */
+#define AR5K_SISR0_QCU_TXDESC_S 16
#define AR5K_SISR1 0x0088 /* Register Address [5211+] */
#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */
+#define AR5K_SISR1_QCU_TXERR_S 0
#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */
+#define AR5K_SISR1_QCU_TXEOL_S 16
#define AR5K_SISR2 0x008c /* Register Address [5211+] */
#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
+#define AR5K_SISR2_QCU_TXURN_S 0
#define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */
#define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */
-#define AR5K_SISR2_DPERR 0x00400000 /* Det par Error (?) */
+#define AR5K_SISR2_DPERR 0x00400000 /* Bus parity error */
#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */
#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */
#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */
#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */
+#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */
#define AR5K_SISR3 0x0090 /* Register Address [5211+] */
#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
+#define AR5K_SISR3_QCBORN_S 0
#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */
+#define AR5K_SISR3_QCBRURN_S 16
#define AR5K_SISR4 0x0094 /* Register Address [5211+] */
#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */
+#define AR5K_SISR4_QTRIG_S 0
/*
* Shadow read-and-clear interrupt status registers [5211+]
@@ -379,7 +393,7 @@
#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/
#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */
#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/
-#define AR5K_IMR_BRSSI 0x00020000
+#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/
#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */
@@ -387,12 +401,14 @@
#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/
#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */
#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */
+#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
#define AR5K_IMR_TIM 0x00800000 /* [5211+] */
-#define AR5K_IMR_BCNMISC 0x00800000 /* [5212+] */
+#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/
-#define AR5K_IMR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */
-#define AR5K_IMR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */
-#define AR5K_IMR_QTRIG 0x08000000 /* [5211+] */
+#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */
+#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */
+#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
/*
* Secondary interrupt mask registers [5211+] (0 - 4)
@@ -414,13 +430,14 @@
#define AR5K_SIMR2_QCU_TXURN_S 0
#define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */
#define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */
-#define AR5K_SIMR2_DPERR 0x00400000 /* Det par Error (?) */
+#define AR5K_SIMR2_DPERR 0x00400000 /* Bus parity error */
#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */
#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */
#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */
#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */
+#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */
#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */
#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
@@ -586,15 +603,15 @@
#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */
#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */
#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */
-#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated (?) */
-#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* Time gated (?) */
-#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated (?) */
+#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */
+#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */
+#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */
#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */
-#define AR5K_QCU_MISC_CBREXP 0x00000020 /* CBR expired (normal queue) */
-#define AR5K_QCU_MISC_CBREXP_BCN 0x00000040 /* CBR expired (beacon queue) */
+#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */
+#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */
#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */
-#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR threshold enabled */
-#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME enalbed */
+#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */
+#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */
#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */
#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */
#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */
@@ -663,6 +680,7 @@
#define AR5K_DCU_LCL_IFS_CW_MAX_S 10
#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */
#define AR5K_DCU_LCL_IFS_AIFS_S 20
+#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */
#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)
/*
@@ -691,11 +709,7 @@
/*
* DCU misc registers [5211+]
*
- * For some of the registers i couldn't find in the code
- * (only backoff stuff is there realy) i tried to match the
- * names with 802.11e parameters etc, so i guess VIRTCOL here
- * means Virtual Collision and HCFPOLL means Hybrid Coordination
- * factor Poll (CF- Poll). Arbiter lockout control controls the
+ * Note: Arbiter lockout control controls the
* behaviour on low priority queues when we have multiple queues
* with pending frames. Intra-frame lockout means we wait until
* the queue's current frame transmits (with post frame backoff and bursting)
@@ -705,15 +719,20 @@
* No lockout means there is no special handling.
*/
#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */
-#define AR5K_DCU_MISC_BACKOFF 0x000007ff /* Mask for backoff threshold */
+#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */
+#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series
+ station RTS/data failure count
+ reset policy (?) */
+#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series
+ CW reset policy */
+#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */
#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */
#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */
#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */
#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */
#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */
-#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0
-#define AR5K_DCU_MISC_VIRTCOL_MODIFIED 1
-#define AR5K_DCU_MISC_VIRTCOL_IGNORE 2
+#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0
+#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1
#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */
#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */
#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17
@@ -768,8 +787,9 @@
#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */
#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */
#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */
+#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10
#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */
-#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFC cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */
#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */
#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */
@@ -820,8 +840,6 @@
#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */
#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */
#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */
-#define AR5K_RESET_CTL_CHIP (AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA | \
- AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY)
/*
* Sleep control register
@@ -833,9 +851,11 @@
#define AR5K_SLEEP_CTL_SLE_S 16
#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */
#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */
-#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000
+#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */
#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */
-/* more bits */
+#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */
+#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */
+#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */
/*
* Interrupt pending register
@@ -851,27 +871,28 @@
/*
* PCI configuration register
+ * TODO: Fix LED stuff
*/
#define AR5K_PCICFG 0x4010 /* Register Address */
#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */
-#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock (?) */
+#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */
#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */
#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */
#define AR5K_PCICFG_EESIZE_S 3
#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */
#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */
#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */
-#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size (?) [5211+] */
+#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */
#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */
#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */
#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */
#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */
#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */
-#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix (?) */
-#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep (?) */
+#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */
+#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */
#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */
-#define AR5K_PCICFG_UNK 0x00001000 /* Passed on some parts durring attach (?) */
-#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts (?) */
+#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */
+#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/
#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */
#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */
#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */
@@ -884,7 +905,8 @@
#define AR5K_PCICFG_LEDSTATE \
(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \
AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
-#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate (field) */
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24
/*
* "General Purpose Input/Output" (GPIO) control register
@@ -906,8 +928,8 @@
#define AR5K_GPIOCR 0x4014 /* Register Address */
#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */
-#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is off (?) */
-#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is on */
+#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */
+#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */
#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */
#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */
#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */
@@ -925,7 +947,6 @@
#define AR5K_GPIODI 0x401c
#define AR5K_GPIODI_M 0x0000002f
-
/*
* Silicon revision register
*/
@@ -935,7 +956,59 @@
#define AR5K_SREV_VER 0x000000ff /* Mask for version */
#define AR5K_SREV_VER_S 4
+/*
+ * TXE write posting register
+ */
+#define AR5K_TXEPOST 0x4028
+
+/*
+ * QCU sleep mask
+ */
+#define AR5K_QCU_SLEEP_MASK 0x402c
+
+/* 0x4068 is compression buffer configuration
+ * register on 5414 and pm configuration register
+ * on 5424 and newer pci-e chips. */
+
+/*
+ * Compression buffer configuration
+ * register (enable/disable) [5414]
+ */
+#define AR5K_5414_CBCFG 0x4068
+#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */
+
+/*
+ * PCI-E Power managment configuration
+ * and status register [5424+]
+ */
+#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */
+/* Only 5424 */
+#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1
+ when d2_sleep_en is asserted */
+#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */
+#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */
+#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes
+ down */
+/* Wake On Wireless */
+#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */
+#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */
+#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */
+#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080
+#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100
+#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200
+#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400
+
+/*
+ * PCI-E Workaround enable register
+ */
+#define AR5K_PCIE_WAEN 0x407c
+/*
+ * PCI-E Serializer/Desirializer
+ * registers
+ */
+#define AR5K_PCIE_SERDES 0x4080
+#define AR5K_PCIE_SERDES_RESET 0x4084
/*====EEPROM REGISTERS====*/
@@ -977,98 +1050,6 @@
#define AR5K_EEPROM_BASE 0x6000
/*
- * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
- */
-#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */
-#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */
-#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */
-#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */
-#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */
-
-#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */
-#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */
-#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */
-#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */
-#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008
-#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */
-#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020
-#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */
-#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080
-#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */
-#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200
-#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */
-#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800
-#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */
-#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000
-#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */
-#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000
-#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */
-#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */
-#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE)
-#define AR5K_EEPROM_INFO_CKSUM 0xffff
-#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n))
-
-#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */
-#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */
-#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */
-#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */
-#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
-#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
-#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_3 0x4003
-#define AR5K_EEPROM_VERSION_4_4 0x4004
-#define AR5K_EEPROM_VERSION_4_5 0x4005
-#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */
-#define AR5K_EEPROM_VERSION_4_7 0x4007
-
-#define AR5K_EEPROM_MODE_11A 0
-#define AR5K_EEPROM_MODE_11B 1
-#define AR5K_EEPROM_MODE_11G 2
-
-#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */
-#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
-#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
-#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
-#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */
-#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */
-#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7)
-#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */
-#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */
-
-#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c
-#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2
-#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002
-#define AR5K_EEPROM_RFKILL_POLARITY_S 1
-
-/* Newer EEPROMs are using a different offset */
-#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
- (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
-
-#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
-#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff))
-#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff))
-
-/* calibration settings */
-#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
-#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
-#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
-#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */
-
-/* [3.1 - 3.3] */
-#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec
-#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed
-
-/* Misc values available since EEPROM 4.0 */
-#define AR5K_EEPROM_MISC0 0x00c4
-#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff)
-#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3)
-#define AR5K_EEPROM_MISC1 0x00c5
-#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff)
-#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1)
-
-/*
* EEPROM data register
*/
#define AR5K_EEPROM_DATA_5211 0x6004
@@ -1100,14 +1081,28 @@
* EEPROM config register
*/
#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */
-#define AR5K_EEPROM_CFG_SIZE_OVR 0x00000001
+#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */
+#define AR5K_EEPROM_CFG_SIZE_AUTO 0
+#define AR5K_EEPROM_CFG_SIZE_4KBIT 1
+#define AR5K_EEPROM_CFG_SIZE_8KBIT 2
+#define AR5K_EEPROM_CFG_SIZE_16KBIT 3
#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */
#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */
-#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protectio key */
+#define AR5K_EEPROM_CFG_CLK_RATE_S 3
+#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0
+#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1
+#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2
+#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */
+#define AR5K_EEPROM_CFG_PROT_KEY_S 8
#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */
/*
+ * TODO: Wake On Wireless registers
+ * Range 0x7000 - 0x7ce0
+ */
+
+/*
* Protocol Control Unit (PCU) registers
*/
/*
@@ -1139,11 +1134,13 @@
#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */
#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */
#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */
-#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate (for ACK/CTS ?) [5211+] */
-#define AR5K_STA_ID1_SELF_GEN_SECTORE 0x04000000 /* Self generate sectore (?) */
+#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */
+#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */
#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */
-#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Keysearch mode (?) */
+#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */
#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */
+#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */
+#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */
/*
* First BSSID register (MAC address, lower 32bits)
@@ -1402,16 +1399,16 @@
#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040
#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
-#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100
+#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */
#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080
#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
-#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200
+#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */
#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100
#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 /* Enable scrambler seed */
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200
#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */
@@ -1420,12 +1417,15 @@
#define AR5K_DIAG_SW_SCRAM_SEED_S 10
#define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */
#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000
-#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000
+#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */
#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
-#define AR5K_DIAG_SW_OBSPT_M 0x000c0000
+#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */
#define AR5K_DIAG_SW_OBSPT_S 18
-/* more bits */
+#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */
+#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */
+#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */
+#define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */
/*
* TSF (clock) register (lower 32 bits)
@@ -1636,16 +1636,16 @@
*
* XXX: PCDAC steps (0.5dbm) or DBM ?
*
- * XXX: Mask changes for newer chips to 7f
- * like tx power table ?
*/
#define AR5K_TXPC 0x80e8 /* Register Address */
-#define AR5K_TXPC_ACK_M 0x0000003f /* Mask for ACK tx power */
+#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */
#define AR5K_TXPC_ACK_S 0
-#define AR5K_TXPC_CTS_M 0x00003f00 /* Mask for CTS tx power */
+#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */
#define AR5K_TXPC_CTS_S 8
-#define AR5K_TXPC_CHIRP_M 0x003f0000 /* Mask for CHIRP tx power */
-#define AR5K_TXPC_CHIRP_S 22
+#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */
+#define AR5K_TXPC_CHIRP_S 16
+#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */
+#define AR5K_TXPC_DOPPLER_S 24
/*
* Profile count registers
@@ -1656,14 +1656,19 @@
#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */
/*
- * Quiet (period) control registers (?)
+ * Quiet period control registers
*/
#define AR5K_QUIET_CTL1 0x80fc /* Register Address */
-#define AR5K_QUIET_CTL1_NEXT_QT 0x0000ffff /* Mask for next quiet (period?) (?) */
-#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet (period?) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0
+#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */
+#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */
+
#define AR5K_QUIET_CTL2 0x8100 /* Register Address */
-#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period (?) */
-#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet duration (?) */
+#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */
+#define AR5K_QUIET_CTL2_QT_PER_S 0
+#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */
+#define AR5K_QUIET_CTL2_QT_DUR_S 16
/*
* TSF parameter register
@@ -1673,12 +1678,15 @@
#define AR5K_TSF_PARM_INC_S 0
/*
- * QoS register (?)
+ * QoS NOACK policy
*/
-#define AR5K_QOS 0x8108 /* Register Address */
-#define AR5K_QOS_NOACK_2BIT_VALUES 0x00000000 /* (field) */
-#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000020 /* (field) */
-#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000080 /* (field) */
+#define AR5K_QOS_NOACK 0x8108 /* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */
+#define AR5K_QOS_NOACK_2BIT_VALUES_S 0
+#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */
+#define AR5K_QOS_NOACK_BIT_OFFSET_S 4
+#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */
+#define AR5K_QOS_NOACK_BYTE_OFFSET_S 8
/*
* PHY error filter register
@@ -1702,29 +1710,15 @@
/*
* MIC QoS control register (?)
*/
-#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */
-#define AR5K_MIC_QOS_CTL_0 0x00000001 /* MIC QoS control 0 (?) */
-#define AR5K_MIC_QOS_CTL_1 0x00000004 /* MIC QoS control 1 (?) */
-#define AR5K_MIC_QOS_CTL_2 0x00000010 /* MIC QoS control 2 (?) */
-#define AR5K_MIC_QOS_CTL_3 0x00000040 /* MIC QoS control 3 (?) */
-#define AR5K_MIC_QOS_CTL_4 0x00000100 /* MIC QoS control 4 (?) */
-#define AR5K_MIC_QOS_CTL_5 0x00000400 /* MIC QoS control 5 (?) */
-#define AR5K_MIC_QOS_CTL_6 0x00001000 /* MIC QoS control 6 (?) */
-#define AR5K_MIC_QOS_CTL_7 0x00004000 /* MIC QoS control 7 (?) */
-#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */
+#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */
+#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2))
+#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */
/*
* MIC QoS select register (?)
*/
-#define AR5K_MIC_QOS_SEL 0x811c
-#define AR5K_MIC_QOS_SEL_0 0x00000001
-#define AR5K_MIC_QOS_SEL_1 0x00000010
-#define AR5K_MIC_QOS_SEL_2 0x00000100
-#define AR5K_MIC_QOS_SEL_3 0x00001000
-#define AR5K_MIC_QOS_SEL_4 0x00010000
-#define AR5K_MIC_QOS_SEL_5 0x00100000
-#define AR5K_MIC_QOS_SEL_6 0x01000000
-#define AR5K_MIC_QOS_SEL_7 0x10000000
+#define AR5K_MIC_QOS_SEL 0x811c
+#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4))
/*
* Misc mode control register (?)
@@ -1759,6 +1753,11 @@
#define AR5K_TSF_THRES 0x813c
/*
+ * TODO: Wake On Wireless registers
+ * Range: 0x8147 - 0x818c
+ */
+
+/*
* Rate -> ACK SIFS mapping table (32 entries)
*/
#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */
@@ -1873,7 +1872,8 @@
*/
#define AR5K_PHY_TURBO 0x9804 /* Register Address */
#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */
-#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Short mode (20Mhz channels) (?) */
+#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */
+#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */
/*
* PHY agility command register
@@ -1883,6 +1883,11 @@
#define AR5K_PHY_TST1 0x9808
#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/
#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC_S 1
+#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */
+#define AR5K_PHY_TST1_TXSRC_ALT_S 7
+
/*
* PHY timing register 3 [5112+]
@@ -1907,15 +1912,23 @@
/*
* PHY RF control registers
- * (i think these are delay times,
- * these calibration values exist
- * in EEPROM)
*/
#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */
-#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* Mask for TX frame to TX d(esc?) start */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0
#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */
-#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* Mask for TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 0
+
+#define AR5K_PHY_ADC_CTL 0x982c
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0
+#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000
+#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000
+#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16
#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */
#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */
@@ -1937,35 +1950,43 @@
* PHY settling register
*/
#define AR5K_PHY_SETTLING 0x9844 /* Register Address */
-#define AR5K_PHY_SETTLING_AGC 0x0000007f /* Mask for AGC settling time */
-#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Mask for Switch settlig time */
+#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */
+#define AR5K_PHY_SETTLING_AGC_S 0
+#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settlig time */
+#define AR5K_PHY_SETTLINK_SWITCH_S 7
/*
* PHY Gain registers
*/
#define AR5K_PHY_GAIN 0x9848 /* Register Address */
-#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* Mask for TX-RX Attenuation */
+#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */
+#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12
+#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000
+#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18
#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */
#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */
/*
- * Desired size register
+ * Desired ADC/PGA size register
* (for more infos read ANI patent)
*/
#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */
-#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* Mask for ADC desired size */
-#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* Mask for PGA desired size */
-#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size (?) */
+#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */
+#define AR5K_PHY_DESIRED_SIZE_ADC_S 0
+#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */
+#define AR5K_PHY_DESIRED_SIZE_PGA_S 8
+#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */
+#define AR5K_PHY_DESIRED_SIZE_TOT_S 20
/*
* PHY signal register
* (for more infos read ANI patent)
*/
#define AR5K_PHY_SIG 0x9858 /* Register Address */
-#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* Mask for FIRSTEP */
+#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */
#define AR5K_PHY_SIG_FIRSTEP_S 12
-#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* Mask for FIPWR */
+#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */
#define AR5K_PHY_SIG_FIRPWR_S 18
/*
@@ -1973,9 +1994,9 @@
* (for more infos read ANI patent)
*/
#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */
-#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* Mask for AGC Coarse low */
+#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */
#define AR5K_PHY_AGCCOARSE_LO_S 7
-#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* Mask for AGC Coarse high */
+#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */
#define AR5K_PHY_AGCCOARSE_HI_S 15
/*
@@ -1984,6 +2005,8 @@
#define AR5K_PHY_AGCCTL 0x9860 /* Register address */
#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */
#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */
+#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */
+#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */
/*
* PHY noise floor status register
@@ -1994,7 +2017,10 @@
#define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M)
#define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1)
#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9))
-#define AR5K_PHY_NF_THRESH62 0x00001000 /* Thresh62 -check ANI patent- (field) */
+#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */
+#define AR5K_PHY_NF_THRESH62_S 12
+#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* ??? */
+#define AR5K_PHY_NF_MINCCA_PWR_S 19
/*
* PHY ADC saturation register [5110]
@@ -2034,24 +2060,31 @@
*/
#define AR5K_PHY_SCR 0x9870
#define AR5K_PHY_SCR_32MHZ 0x0000001f
+
#define AR5K_PHY_SLMT 0x9874
#define AR5K_PHY_SLMT_32MHZ 0x0000007f
+
#define AR5K_PHY_SCAL 0x9878
#define AR5K_PHY_SCAL_32MHZ 0x0000000e
+
/*
* PHY PLL (Phase Locked Loop) control register
*/
#define AR5K_PHY_PLL 0x987c
-#define AR5K_PHY_PLL_20MHZ 0x13 /* For half rate (?) [5111+] */
-#define AR5K_PHY_PLL_40MHZ_5211 0x18 /* For 802.11a */
+#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */
+/* 40MHz -> 5GHz band */
+#define AR5K_PHY_PLL_40MHZ_5211 0x00000018
#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa
+#define AR5K_PHY_PLL_40MHZ_5413 0x00000004
#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \
AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
-#define AR5K_PHY_PLL_44MHZ_5211 0x19 /* For 802.11b/g */
+/* 44MHz -> 2.4GHz band */
+#define AR5K_PHY_PLL_44MHZ_5211 0x00000019
#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab
#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \
AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
+
#define AR5K_PHY_PLL_RF5111 0x00000000
#define AR5K_PHY_PLL_RF5112 0x00000040
#define AR5K_PHY_PLL_HALF_RATE 0x00000100
@@ -2118,6 +2151,19 @@
#define AR5K_PHY_RFSTG_DISABLE 0x00000021
/*
+ * BIN masks (?)
+ */
+#define AR5K_PHY_BIN_MASK_1 0x9900
+#define AR5K_PHY_BIN_MASK_2 0x9904
+#define AR5K_PHY_BIN_MASK_3 0x9908
+
+#define AR5K_PHY_BIN_MASK_CTL 0x990c
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0
+#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000
+#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24
+
+/*
* PHY Antenna control register
*/
#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */
@@ -2164,6 +2210,7 @@
#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 0
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */
#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */
#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */
@@ -2210,7 +2257,6 @@
#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */
#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */
-
/*
* PHY TX rate power registers [5112+]
*/
@@ -2232,6 +2278,8 @@
#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */
#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3
#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */
+#define AR5K_PHY_FRAME_CTL_EMU 0x80000000
+#define AR5K_PHY_FRAME_CTL_EMU_S 31
/*---[5110/5111]---*/
#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */
#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */
@@ -2250,48 +2298,36 @@
* PHY radar detection register [5111+]
*/
#define AR5K_PHY_RADAR 0x9954
-
-/* Radar enable ........ ........ ........ .......1 */
#define AR5K_PHY_RADAR_ENABLE 0x00000001
-#define AR5K_PHY_RADAR_DISABLE 0x00000000
-#define AR5K_PHY_RADAR_ENABLE_S 0
-
-/* This is the value found on the card .1.111.1 .1.1.... 111....1 1...1...
-at power on. */
-#define AR5K_PHY_RADAR_PWONDEF_AR5213 0x5d50e188
-
-/* This is the value found on the card .1.1.111 ..11...1 .1...1.1 1...11.1
-after DFS is enabled */
-#define AR5K_PHY_RADAR_ENABLED_AR5213 0x5731458d
-
-/* Finite Impulse Response (FIR) filter .1111111 ........ ........ ........
- * power out threshold.
- * 7-bits, standard power range {0..127} in 1/2 dBm units. */
-#define AR5K_PHY_RADAR_FIRPWROUTTHR 0x7f000000
-#define AR5K_PHY_RADAR_FIRPWROUTTHR_S 24
-
-/* Radar RSSI/SNR threshold. ........ 111111.. ........ ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_RADARRSSITHR 0x00fc0000
-#define AR5K_PHY_RADAR_RADARRSSITHR_S 18
-
-/* Pulse height threshold ........ ......11 1111.... ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR 0x0003f000
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR_S 12
-
-/* Pulse RSSI/SNR threshold ........ ........ ....1111 11......
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSERSSITHR 0x00000fc0
-#define AR5K_PHY_RADAR_PULSERSSITHR_S 6
-
-/* Inband threshold ........ ........ ........ ..11111.
- * 5-bits, units unknown {0..31} (? MHz ?) */
-#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e
+#define AR5K_PHY_RADAR_DISABLE 0x00000000
+#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold
+ 5-bits, units unknown {0..31}
+ (? MHz ?) */
#define AR5K_PHY_RADAR_INBANDTHR_S 1
+#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_PRSSI_THR_S 6
+
+#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12
+
+#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold.
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_RSSI_THR_S 18
+
+#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response
+ filter power out threshold.
+ 7-bits, standard power range
+ {0..127} in 1/2 dBm units. */
+#define AR5K_PHY_RADAR_FIRPWR_THRS 24
+
/*
- * PHY antenna switch table registers [5110]
+ * PHY antenna switch table registers
*/
#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960
#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964
@@ -2302,25 +2338,65 @@ after DFS is enabled */
#define AR5K_PHY_NFTHRES 0x9968
/*
- * PHY clock sleep registers [5112+]
+ * Sigma Delta register (?) [5213]
*/
-#define AR5K_PHY_SCLOCK 0x99f0
-#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c
-#define AR5K_PHY_SDELAY 0x99f4
-#define AR5K_PHY_SDELAY_32MHZ 0x000000ff
-#define AR5K_PHY_SPENDING 0x99f8
-#define AR5K_PHY_SPENDING_14 0x00000014
-#define AR5K_PHY_SPENDING_18 0x00000018
-#define AR5K_PHY_SPENDING_RF5111 0x00000018
-#define AR5K_PHY_SPENDING_RF5112 0x00000014
-/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */
-/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */
-#define AR5K_PHY_SPENDING_RF5413 0x00000014
-#define AR5K_PHY_SPENDING_RF2413 0x00000014
-#define AR5K_PHY_SPENDING_RF2425 0x00000018
+#define AR5K_PHY_SIGMA_DELTA 0x996C
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0
+#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8
+#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3
+#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00
+#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ff3000
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13
+
+/*
+ * RF restart register [5112+] (?)
+ */
+#define AR5K_PHY_RESTART 0x9970 /* restart */
+#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */
+#define AR5K_PHY_RESTART_DIV_GC_S 18
+
+/*
+ * RF Bus access request register (for synth-oly channel switching)
+ */
+#define AR5K_PHY_RFBUS_REQ 0x997C
+#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001
+
+/*
+ * Spur mitigation masks (?)
+ */
+#define AR5K_PHY_TIMING_7 0x9980
+#define AR5K_PHY_TIMING_8 0x9984
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0
+
+#define AR5K_PHY_BIN_MASK2_1 0x9988
+#define AR5K_PHY_BIN_MASK2_2 0x998c
+#define AR5K_PHY_BIN_MASK2_3 0x9990
+
+#define AR5K_PHY_BIN_MASK2_4 0x9994
+#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff
+#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0
+
+#define AR_PHY_TIMING_9 0x9998
+#define AR_PHY_TIMING_10 0x999c
+#define AR_PHY_TIMING_10_PILOT_MASK_2 0x000fffff
+#define AR_PHY_TIMING_10_PILOT_MASK_2_S 0
+
+/*
+ * Spur mitigation control
+ */
+#define AR_PHY_TIMING_11 0x99a0 /* Register address */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD_S 20
+#define AR_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */
+#define AR_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */
/*
- * Misc PHY/radio registers [5110 - 5111]
+ * Gain tables
*/
#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */
#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2))
@@ -2340,9 +2416,10 @@ after DFS is enabled */
#define AR5K_PHY_CURRENT_RSSI 0x9c1c
/*
- * PHY RF Bus grant register (?)
+ * PHY RF Bus grant register
*/
#define AR5K_PHY_RFBUS_GRANT 0x9c20
+#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001
/*
* PHY ADC test register
@@ -2386,6 +2463,31 @@ after DFS is enabled */
#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008
/*
+ * Heavy clip enable register
+ */
+#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0
+
+/*
+ * PHY clock sleep registers [5112+]
+ */
+#define AR5K_PHY_SCLOCK 0x99f0
+#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c
+#define AR5K_PHY_SDELAY 0x99f4
+#define AR5K_PHY_SDELAY_32MHZ 0x000000ff
+#define AR5K_PHY_SPENDING 0x99f8
+#define AR5K_PHY_SPENDING_14 0x00000014
+#define AR5K_PHY_SPENDING_18 0x00000018
+#define AR5K_PHY_SPENDING_RF5111 0x00000018
+#define AR5K_PHY_SPENDING_RF5112 0x00000014
+/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */
+/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */
+#define AR5K_PHY_SPENDING_RF5413 0x00000018
+#define AR5K_PHY_SPENDING_RF2413 0x00000018
+#define AR5K_PHY_SPENDING_RF2316 0x00000018
+#define AR5K_PHY_SPENDING_RF2317 0x00000018
+#define AR5K_PHY_SPENDING_RF2425 0x00000014
+
+/*
* PHY PAPD I (power?) table (?)
* (92! entries)
*/
@@ -2436,10 +2538,47 @@ after DFS is enabled */
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0
+/* Same address is used for antenna diversity activation */
+#define AR5K_PHY_FAST_ANT_DIV 0xa208
+#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000
+
/*
* PHY 2GHz gain register [5111+]
*/
-#define AR5K_PHY_GAIN_2GHZ 0xa20c
-#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000
+#define AR5K_PHY_GAIN_2GHZ 0xa20c
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000
#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18
-#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c
+#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c
+
+#define AR5K_PHY_CCK_RX_CTL_4 0xa21c
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19
+
+#define AR5K_PHY_DAG_CCK_CTL 0xa228
+#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10
+
+#define AR5K_PHY_FAST_ADC 0xa24c
+
+#define AR5K_PHY_BLUETOOTH 0xa254
+
+/*
+ * Transmit Power Control register
+ * [2413+]
+ */
+#define AR5K_PHY_TPC_RG1 0xa258
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14
+
+#define AR5K_PHY_TPC_RG5 0xa26C
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22
diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c
new file mode 100644
index 000000000000..8f1886834e61
--- /dev/null
+++ b/drivers/net/wireless/ath5k/reset.c
@@ -0,0 +1,931 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#define _ATH5K_RESET
+
+/*****************************\
+ Reset functions and helpers
+\*****************************/
+
+#include <linux/pci.h>
+#include "ath5k.h"
+#include "reg.h"
+#include "base.h"
+#include "debug.h"
+
+/**
+ * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
+ *
+ * @ah: the &struct ath5k_hw
+ * @channel: the currently set channel upon reset
+ *
+ * Write the OFDM timings for the AR5212 upon reset. This is a helper for
+ * ath5k_hw_reset(). This seems to tune the PLL a specified frequency
+ * depending on the bandwidth of the channel.
+ *
+ */
+static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ /* Get exponent and mantissa and set it */
+ u32 coef_scaled, coef_exp, coef_man,
+ ds_coef_exp, ds_coef_man, clock;
+
+ if (!(ah->ah_version == AR5K_AR5212) ||
+ !(channel->hw_value & CHANNEL_OFDM))
+ BUG();
+
+ /* Seems there are two PLLs, one for baseband sampling and one
+ * for tuning. Tuning basebands are 40 MHz or 80MHz when in
+ * turbo. */
+ clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40;
+ coef_scaled = ((5 * (clock << 24)) / 2) /
+ channel->center_freq;
+
+ for (coef_exp = 31; coef_exp > 0; coef_exp--)
+ if ((coef_scaled >> coef_exp) & 0x1)
+ break;
+
+ if (!coef_exp)
+ return -EINVAL;
+
+ coef_exp = 14 - (coef_exp - 24);
+ coef_man = coef_scaled +
+ (1 << (24 - coef_exp - 1));
+ ds_coef_man = coef_man >> (24 - coef_exp);
+ ds_coef_exp = coef_exp - 16;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+ AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+ AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
+
+ return 0;
+}
+
+
+/*
+ * index into rates for control rates, we can set it up like this because
+ * this is only used for AR5212 and we know it supports G mode
+ */
+static int control_rates[] =
+ { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
+
+/**
+ * ath5k_hw_write_rate_duration - set rate duration during hw resets
+ *
+ * @ah: the &struct ath5k_hw
+ * @mode: one of enum ath5k_driver_mode
+ *
+ * Write the rate duration table upon hw reset. This is a helper for
+ * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for
+ * the hardware for the current mode for each rate. The rates which are capable
+ * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another
+ * register for the short preamble ACK timeout calculation.
+ */
+static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
+ unsigned int mode)
+{
+ struct ath5k_softc *sc = ah->ah_sc;
+ struct ieee80211_rate *rate;
+ unsigned int i;
+
+ /* Write rate duration table */
+ for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
+ u32 reg;
+ u16 tx_time;
+
+ rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];
+
+ /* Set ACK timeout */
+ reg = AR5K_RATE_DUR(rate->hw_value);
+
+ /* An ACK frame consists of 10 bytes. If you add the FCS,
+ * which ieee80211_generic_frame_duration() adds,
+ * its 14 bytes. Note we use the control rate and not the
+ * actual rate for this rate. See mac80211 tx.c
+ * ieee80211_duration() for a brief description of
+ * what rate we should choose to TX ACKs. */
+ tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
+ sc->vif, 10, rate));
+
+ ath5k_hw_reg_write(ah, tx_time, reg);
+
+ if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
+ continue;
+
+ /*
+ * We're not distinguishing short preamble here,
+ * This is true, all we'll get is a longer value here
+ * which is not necessarilly bad. We could use
+ * export ieee80211_frame_duration() but that needs to be
+ * fixed first to be properly used by mac802111 drivers:
+ *
+ * - remove erp stuff and let the routine figure ofdm
+ * erp rates
+ * - remove passing argument ieee80211_local as
+ * drivers don't have access to it
+ * - move drivers using ieee80211_generic_frame_duration()
+ * to this
+ */
+ ath5k_hw_reg_write(ah, tx_time,
+ reg + (AR5K_SET_SHORT_PREAMBLE << 2));
+ }
+}
+
+/*
+ * Reset chipset
+ */
+static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
+{
+ int ret;
+ u32 mask = val ? val : ~0U;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Read-and-clear RX Descriptor Pointer*/
+ ath5k_hw_reg_read(ah, AR5K_RXDP);
+
+ /*
+ * Reset the device and wait until success
+ */
+ ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
+
+ /* Wait at least 128 PCI clocks */
+ udelay(15);
+
+ if (ah->ah_version == AR5K_AR5210) {
+ val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+ | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+ mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+ | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+ } else {
+ val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+ mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+ }
+
+ ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
+
+ /*
+ * Reset configuration register (for hw byte-swap). Note that this
+ * is only set for big endian. We do the necessary magic in
+ * AR5K_INIT_CFG.
+ */
+ if ((val & AR5K_RESET_CTL_PCU) == 0)
+ ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
+
+ return ret;
+}
+
+/*
+ * Sleep control
+ */
+int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
+ bool set_chip, u16 sleep_duration)
+{
+ unsigned int i;
+ u32 staid, data;
+
+ ATH5K_TRACE(ah->ah_sc);
+ staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
+
+ switch (mode) {
+ case AR5K_PM_AUTO:
+ staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
+ /* fallthrough */
+ case AR5K_PM_NETWORK_SLEEP:
+ if (set_chip)
+ ath5k_hw_reg_write(ah,
+ AR5K_SLEEP_CTL_SLE_ALLOW |
+ sleep_duration,
+ AR5K_SLEEP_CTL);
+
+ staid |= AR5K_STA_ID1_PWR_SV;
+ break;
+
+ case AR5K_PM_FULL_SLEEP:
+ if (set_chip)
+ ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
+ AR5K_SLEEP_CTL);
+
+ staid |= AR5K_STA_ID1_PWR_SV;
+ break;
+
+ case AR5K_PM_AWAKE:
+
+ staid &= ~AR5K_STA_ID1_PWR_SV;
+
+ if (!set_chip)
+ goto commit;
+
+ /* Preserve sleep duration */
+ data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+ if (data & 0xffc00000)
+ data = 0;
+ else
+ data = data & 0xfffcffff;
+
+ ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+ udelay(15);
+
+ for (i = 50; i > 0; i--) {
+ /* Check if the chip did wake up */
+ if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+ AR5K_PCICFG_SPWR_DN) == 0)
+ break;
+
+ /* Wait a bit and retry */
+ udelay(200);
+ ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+ }
+
+ /* Fail if the chip didn't wake up */
+ if (i <= 0)
+ return -EIO;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+commit:
+ ah->ah_power_mode = mode;
+ ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
+
+ return 0;
+}
+
+/*
+ * Bring up MAC + PHY Chips
+ */
+int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
+{
+ struct pci_dev *pdev = ah->ah_sc->pdev;
+ u32 turbo, mode, clock, bus_flags;
+ int ret;
+
+ turbo = 0;
+ mode = 0;
+ clock = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Wakeup the device */
+ ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
+ return ret;
+ }
+
+ if (ah->ah_version != AR5K_AR5210) {
+ /*
+ * Get channel mode flags
+ */
+
+ if (ah->ah_radio >= AR5K_RF5112) {
+ mode = AR5K_PHY_MODE_RAD_RF5112;
+ clock = AR5K_PHY_PLL_RF5112;
+ } else {
+ mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/
+ clock = AR5K_PHY_PLL_RF5111; /*Zero*/
+ }
+
+ if (flags & CHANNEL_2GHZ) {
+ mode |= AR5K_PHY_MODE_FREQ_2GHZ;
+ clock |= AR5K_PHY_PLL_44MHZ;
+
+ if (flags & CHANNEL_CCK) {
+ mode |= AR5K_PHY_MODE_MOD_CCK;
+ } else if (flags & CHANNEL_OFDM) {
+ /* XXX Dynamic OFDM/CCK is not supported by the
+ * AR5211 so we set MOD_OFDM for plain g (no
+ * CCK headers) operation. We need to test
+ * this, 5211 might support ofdm-only g after
+ * all, there are also initial register values
+ * in the code for g mode (see initvals.c). */
+ if (ah->ah_version == AR5K_AR5211)
+ mode |= AR5K_PHY_MODE_MOD_OFDM;
+ else
+ mode |= AR5K_PHY_MODE_MOD_DYN;
+ } else {
+ ATH5K_ERR(ah->ah_sc,
+ "invalid radio modulation mode\n");
+ return -EINVAL;
+ }
+ } else if (flags & CHANNEL_5GHZ) {
+ mode |= AR5K_PHY_MODE_FREQ_5GHZ;
+ clock |= AR5K_PHY_PLL_40MHZ;
+
+ if (flags & CHANNEL_OFDM)
+ mode |= AR5K_PHY_MODE_MOD_OFDM;
+ else {
+ ATH5K_ERR(ah->ah_sc,
+ "invalid radio modulation mode\n");
+ return -EINVAL;
+ }
+ } else {
+ ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
+ return -EINVAL;
+ }
+
+ if (flags & CHANNEL_TURBO)
+ turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
+ } else { /* Reset the device */
+
+ /* ...enable Atheros turbo mode if requested */
+ if (flags & CHANNEL_TURBO)
+ ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
+ AR5K_PHY_TURBO);
+ }
+
+ /* reseting PCI on PCI-E cards results card to hang
+ * and always return 0xffff... so we ingore that flag
+ * for PCI-E cards */
+ bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+ /* Reset chipset */
+ if (ah->ah_version == AR5K_AR5210) {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+ AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+ mdelay(2);
+ } else {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_BASEBAND | bus_flags);
+ }
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
+ return -EIO;
+ }
+
+ /* ...wakeup again!*/
+ ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
+ return ret;
+ }
+
+ /* ...final warm reset */
+ if (ath5k_hw_nic_reset(ah, 0)) {
+ ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
+ return -EIO;
+ }
+
+ if (ah->ah_version != AR5K_AR5210) {
+ /* ...set the PHY operating mode */
+ ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
+ udelay(300);
+
+ ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
+ ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
+ }
+
+ return 0;
+}
+
+/*
+ * Main reset function
+ */
+int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+ struct ieee80211_channel *channel, bool change_channel)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct pci_dev *pdev = ah->ah_sc->pdev;
+ u32 data, s_seq, s_ant, s_led[3], dma_size;
+ unsigned int i, mode, freq, ee_mode, ant[2];
+ int ret;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ s_seq = 0;
+ s_ant = 0;
+ ee_mode = 0;
+ freq = 0;
+ mode = 0;
+
+ /*
+ * Save some registers before a reset
+ */
+ /*DCU/Antenna selection not available on 5210*/
+ if (ah->ah_version != AR5K_AR5210) {
+ if (change_channel) {
+ /* Seq number for queue 0 -do this for all queues ? */
+ s_seq = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_DFS_SEQNUM(0));
+ /*Default antenna*/
+ s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+ }
+ }
+
+ /*GPIOs*/
+ s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE;
+ s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
+ s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+ if (change_channel && ah->ah_rf_banks != NULL)
+ ath5k_hw_get_rf_gain(ah);
+
+
+ /*Wakeup the device*/
+ ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
+ if (ret)
+ return ret;
+
+ /*
+ * Initialize operating mode
+ */
+ ah->ah_op_mode = op_mode;
+
+ /*
+ * 5111/5112 Settings
+ * 5210 only comes with RF5110
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ if (ah->ah_radio != AR5K_RF5111 &&
+ ah->ah_radio != AR5K_RF5112 &&
+ ah->ah_radio != AR5K_RF5413 &&
+ ah->ah_radio != AR5K_RF2413 &&
+ ah->ah_radio != AR5K_RF2425) {
+ ATH5K_ERR(ah->ah_sc,
+ "invalid phy radio: %u\n", ah->ah_radio);
+ return -EINVAL;
+ }
+
+ switch (channel->hw_value & CHANNEL_MODES) {
+ case CHANNEL_A:
+ mode = AR5K_MODE_11A;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case CHANNEL_G:
+ mode = AR5K_MODE_11G;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_B:
+ mode = AR5K_MODE_11B;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11B;
+ break;
+ case CHANNEL_T:
+ mode = AR5K_MODE_11A_TURBO;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ /*Is this ok on 5211 too ?*/
+ case CHANNEL_TG:
+ mode = AR5K_MODE_11G_TURBO;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_XR:
+ if (ah->ah_version == AR5K_AR5211) {
+ ATH5K_ERR(ah->ah_sc,
+ "XR mode not available on 5211");
+ return -EINVAL;
+ }
+ mode = AR5K_MODE_XR;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ default:
+ ATH5K_ERR(ah->ah_sc,
+ "invalid channel: %d\n", channel->center_freq);
+ return -EINVAL;
+ }
+
+ /* PHY access enable */
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+
+ }
+
+ ret = ath5k_hw_write_initvals(ah, mode, change_channel);
+ if (ret)
+ return ret;
+
+ /*
+ * 5211/5212 Specific
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ /*
+ * Write initial RF gain settings
+ * This should work for both 5111/5112
+ */
+ ret = ath5k_hw_rfgain(ah, freq);
+ if (ret)
+ return ret;
+
+ mdelay(1);
+
+ /*
+ * Write some more initial register settings
+ */
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
+
+ if (channel->hw_value == CHANNEL_G)
+ if (ah->ah_mac_srev < AR5K_SREV_AR2413)
+ ath5k_hw_reg_write(ah, 0x00f80d80,
+ 0x994c);
+ else if (ah->ah_mac_srev < AR5K_SREV_AR5424)
+ ath5k_hw_reg_write(ah, 0x00380140,
+ 0x994c);
+ else if (ah->ah_mac_srev < AR5K_SREV_AR2425)
+ ath5k_hw_reg_write(ah, 0x00fc0ec0,
+ 0x994c);
+ else /* 2425 */
+ ath5k_hw_reg_write(ah, 0x00fc0fc0,
+ 0x994c);
+ else
+ ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
+
+ /* Some bits are disabled here, we know nothing about
+ * register 0xa228 yet, most of the times this ends up
+ * with a value 0x9b5 -haven't seen any dump with
+ * a different value- */
+ /* Got this from decompiling binary HAL */
+ data = ath5k_hw_reg_read(ah, 0xa228);
+ data &= 0xfffffdff;
+ ath5k_hw_reg_write(ah, data, 0xa228);
+
+ data = ath5k_hw_reg_read(ah, 0xa228);
+ data &= 0xfffe03ff;
+ ath5k_hw_reg_write(ah, data, 0xa228);
+ data = 0;
+
+ /* Just write 0x9b5 ? */
+ /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
+ ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
+ ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
+ ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
+ }
+
+ /* Fix for first revision of the RF5112 RF chipset */
+ if (ah->ah_radio >= AR5K_RF5112 &&
+ ah->ah_radio_5ghz_revision <
+ AR5K_SREV_RAD_5112A) {
+ ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
+ AR5K_PHY_CCKTXCTL);
+ if (channel->hw_value & CHANNEL_5GHZ)
+ data = 0xffb81020;
+ else
+ data = 0xffb80d20;
+ ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+ data = 0;
+ }
+
+ /*
+ * Set TX power (FIXME)
+ */
+ ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER);
+ if (ret)
+ return ret;
+
+ /* Write rate duration table only on AR5212 and if
+ * virtual interface has already been brought up
+ * XXX: rethink this after new mode changes to
+ * mac80211 are integrated */
+ if (ah->ah_version == AR5K_AR5212 &&
+ ah->ah_sc->vif != NULL)
+ ath5k_hw_write_rate_duration(ah, mode);
+
+ /*
+ * Write RF registers
+ */
+ ret = ath5k_hw_rfregs(ah, channel, mode);
+ if (ret)
+ return ret;
+
+ /*
+ * Configure additional registers
+ */
+
+ /* Write OFDM timings on 5212*/
+ if (ah->ah_version == AR5K_AR5212 &&
+ channel->hw_value & CHANNEL_OFDM) {
+ ret = ath5k_hw_write_ofdm_timings(ah, channel);
+ if (ret)
+ return ret;
+ }
+
+ /*Enable/disable 802.11b mode on 5111
+ (enable 2111 frequency converter + CCK)*/
+ if (ah->ah_radio == AR5K_RF5111) {
+ if (mode == AR5K_MODE_11B)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_B_MODE);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_B_MODE);
+ }
+
+ /*
+ * Set channel and calibrate the PHY
+ */
+ ret = ath5k_hw_channel(ah, channel);
+ if (ret)
+ return ret;
+
+ /* Set antenna mode */
+ AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL,
+ ah->ah_antenna[ee_mode][0], 0xfffffc06);
+
+ /*
+ * In case a fixed antenna was set as default
+ * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
+ * registers.
+ */
+ if (s_ant != 0) {
+ if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
+ ant[0] = ant[1] = AR5K_ANT_FIXED_A;
+ else /* 2 - Aux */
+ ant[0] = ant[1] = AR5K_ANT_FIXED_B;
+ } else {
+ ant[0] = AR5K_ANT_FIXED_A;
+ ant[1] = AR5K_ANT_FIXED_B;
+ }
+
+ ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+ AR5K_PHY_ANT_SWITCH_TABLE_0);
+ ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+ AR5K_PHY_ANT_SWITCH_TABLE_1);
+
+ /* Commit values from EEPROM */
+ if (ah->ah_radio == AR5K_RF5111)
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
+ AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip);
+
+ ath5k_hw_reg_write(ah,
+ AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
+ AR5K_PHY_NFTHRES);
+
+ AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING,
+ (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
+ 0xffffc07f);
+ AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN,
+ (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000,
+ 0xfffc0fff);
+ AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ (ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
+ ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
+ 0xffff0000);
+
+ ath5k_hw_reg_write(ah,
+ (ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
+ (ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
+ (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
+ (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
+
+ AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3,
+ ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
+ AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF,
+ (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
+ AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01);
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_CORR_ENABLE |
+ (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
+ ee->ee_q_cal[ee_mode]);
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+ AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+ ee->ee_margin_tx_rx[ee_mode]);
+
+ } else {
+ mdelay(1);
+ /* Disable phy and wait */
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+ mdelay(1);
+ }
+
+ /*
+ * Restore saved values
+ */
+ /*DCU/Antenna selection not available on 5210*/
+ if (ah->ah_version != AR5K_AR5210) {
+ ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0));
+ ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
+ }
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
+ ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
+ ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
+
+ /*
+ * Misc
+ */
+ /* XXX: add ah->aid once mac80211 gives this to us */
+ ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+
+ ath5k_hw_set_opmode(ah);
+ /*PISR/SISR Not available on 5210*/
+ if (ah->ah_version != AR5K_AR5210) {
+ ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
+ /* If we later allow tuning for this, store into sc structure */
+ data = AR5K_TUNE_RSSI_THRES |
+ AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S;
+ ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR);
+ }
+
+ /*
+ * Set Rx/Tx DMA Configuration
+ *
+ * Set maximum DMA size (512) except for PCI-E cards since
+ * it causes rx overruns and tx errors (tested on 5424 but since
+ * rx overruns also occur on 5416/5418 with madwifi we set 128
+ * for all PCI-E cards to be safe).
+ *
+ * In dumps this is 128 for allchips.
+ *
+ * XXX: need to check 5210 for this
+ * TODO: Check out tx triger level, it's always 64 on dumps but I
+ * guess we can tweak it and see how it goes ;-)
+ */
+ dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B;
+ if (ah->ah_version != AR5K_AR5210) {
+ AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_SDMAMR, dma_size);
+ AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
+ AR5K_RXCFG_SDMAMW, dma_size);
+ }
+
+ /*
+ * Enable the PHY and wait until completion
+ */
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+
+ /*
+ * On 5211+ read activation -> rx delay
+ * and use it.
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+ AR5K_PHY_RX_DELAY_M;
+ data = (channel->hw_value & CHANNEL_CCK) ?
+ ((data << 2) / 22) : (data / 10);
+
+ udelay(100 + (2 * data));
+ data = 0;
+ } else {
+ mdelay(1);
+ }
+
+ /*
+ * Perform ADC test (?)
+ */
+ data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+ ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+ for (i = 0; i <= 20; i++) {
+ if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+ break;
+ udelay(200);
+ }
+ ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1);
+ data = 0;
+
+ /*
+ * Start automatic gain calibration
+ *
+ * During AGC calibration RX path is re-routed to
+ * a signal detector so we don't receive anything.
+ *
+ * This method is used to calibrate some static offsets
+ * used together with on-the fly I/Q calibration (the
+ * one performed via ath5k_hw_phy_calibrate), that doesn't
+ * interrupt rx path.
+ *
+ * If we are in a noisy environment AGC calibration may time
+ * out.
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL);
+
+ /* At the same time start I/Q calibration for QAM constellation
+ * -no need for CCK- */
+ ah->ah_calibration = false;
+ if (!(mode == AR5K_MODE_11B)) {
+ ah->ah_calibration = true;
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_RUN);
+ }
+
+ /* Wait for gain calibration to finish (we check for I/Q calibration
+ * during ath5k_phy_calibrate) */
+ if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL, 0, false)) {
+ ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
+ channel->center_freq);
+ return -EAGAIN;
+ }
+
+ /*
+ * Start noise floor calibration
+ *
+ * If we run NF calibration before AGC, it always times out.
+ * Binary HAL starts NF and AGC calibration at the same time
+ * and only waits for AGC to finish. I believe that's wrong because
+ * during NF calibration, rx path is also routed to a detector, so if
+ * it doesn't finish we won't have RX.
+ *
+ * XXX: Find an interval that's OK for all cards...
+ */
+ ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+ if (ret)
+ return ret;
+
+ /*
+ * Reset queues and start beacon timers at the end of the reset routine
+ */
+ for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
+ /*No QCU on 5210*/
+ if (ah->ah_version != AR5K_AR5210)
+ AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i);
+
+ ret = ath5k_hw_reset_tx_queue(ah, i);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc,
+ "failed to reset TX queue #%d\n", i);
+ return ret;
+ }
+ }
+
+ /* Pre-enable interrupts on 5211/5212*/
+ if (ah->ah_version != AR5K_AR5210)
+ ath5k_hw_set_imr(ah, AR5K_INT_RX | AR5K_INT_TX |
+ AR5K_INT_FATAL);
+
+ /*
+ * Set RF kill flags if supported by the device (read from the EEPROM)
+ * Disable gpio_intr for now since it results system hang.
+ * TODO: Handle this in ath5k_intr
+ */
+#if 0
+ if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
+ ath5k_hw_set_gpio_input(ah, 0);
+ ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
+ if (ah->ah_gpio[0] == 0)
+ ath5k_hw_set_gpio_intr(ah, 0, 1);
+ else
+ ath5k_hw_set_gpio_intr(ah, 0, 0);
+ }
+#endif
+
+ /*
+ * Set the 32MHz reference clock on 5212 phy clock sleep register
+ *
+ * TODO: Find out how to switch to external 32Khz clock to save power
+ */
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR);
+ ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
+ ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL);
+ ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
+ ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
+ ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
+
+ data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
+ data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
+ 0x00000f80 : 0x00001380 ;
+ ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
+ data = 0;
+ }
+
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah, 0x000100aa, 0x8118);
+ ath5k_hw_reg_write(ah, 0x00003210, 0x811c);
+ ath5k_hw_reg_write(ah, 0x00000052, 0x8108);
+ if (ah->ah_mac_srev >= AR5K_SREV_AR2413)
+ ath5k_hw_reg_write(ah, 0x00000004, 0x8120);
+ }
+
+ /*
+ * Disable beacons and reset the register
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
+ AR5K_BEACON_RESET_TSF);
+
+ return 0;
+}
+
+#undef _ATH5K_RESET