diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c')
-rw-r--r-- | drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c | 287 |
1 files changed, 82 insertions, 205 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c index 32ccc3b883b2..986176d94210 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c @@ -14,6 +14,8 @@ static int iwl_mvm_mld_mac_add_interface(struct ieee80211_hw *hw, mutex_lock(&mvm->mutex); + iwl_mvm_mac_init_mvmvif(mvm, mvmvif); + mvmvif->mvm = mvm; /* Not much to do here. The stack will not allow interface @@ -232,6 +234,15 @@ static int iwl_mvm_esr_mode_active(struct iwl_mvm *mvm, link->phy_ctxt->rlc_disabled = true; } + if (vif->active_links == mvmvif->link_selection_res && + !WARN_ON(!(vif->active_links & BIT(mvmvif->link_selection_primary)))) + mvmvif->primary_link = mvmvif->link_selection_primary; + else + mvmvif->primary_link = __ffs(vif->active_links); + + /* Needed for tracking RSSI */ + iwl_mvm_request_periodic_system_statistics(mvm, true); + return ret; } @@ -275,6 +286,7 @@ __iwl_mvm_mld_assign_vif_chanctx(struct iwl_mvm *mvm, ret = iwl_mvm_esr_mode_active(mvm, vif); if (ret) { IWL_ERR(mvm, "failed to activate ESR mode (%d)\n", ret); + iwl_mvm_request_periodic_system_statistics(mvm, false); goto out; } } @@ -398,6 +410,8 @@ static int iwl_mvm_esr_mode_inactive(struct iwl_mvm *mvm, break; } + iwl_mvm_request_periodic_system_statistics(mvm, false); + return ret; } @@ -468,6 +482,52 @@ static void iwl_mvm_mld_unassign_vif_chanctx(struct ieee80211_hw *hw, mutex_unlock(&mvm->mutex); } +static void +iwl_mvm_send_ap_tx_power_constraint_cmd(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf) +{ + struct iwl_txpower_constraints_cmd cmd = {}; + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + struct iwl_mvm_vif_link_info *link_info = + mvmvif->link[bss_conf->link_id]; + u32 cmd_id = WIDE_ID(PHY_OPS_GROUP, AP_TX_POWER_CONSTRAINTS_CMD); + u32 cmd_ver = iwl_fw_lookup_cmd_ver(mvm->fw, cmd_id, + IWL_FW_CMD_VER_UNKNOWN); + int ret; + + lockdep_assert_held(&mvm->mutex); + + if (cmd_ver == IWL_FW_CMD_VER_UNKNOWN) + return; + + if (!link_info->active || + link_info->fw_link_id == IWL_MVM_FW_LINK_ID_INVALID) + return; + + if (bss_conf->chanreq.oper.chan->band != NL80211_BAND_6GHZ || + bss_conf->chanreq.oper.chan->flags & + IEEE80211_CHAN_NO_6GHZ_VLP_CLIENT) + return; + + cmd.link_id = cpu_to_le16(link_info->fw_link_id); + /* + * Currently supporting VLP Soft AP only. + */ + cmd.ap_type = cpu_to_le16(IWL_6GHZ_AP_TYPE_VLP); + memset(cmd.psd_pwr, DEFAULT_TPE_TX_POWER, sizeof(cmd.psd_pwr)); + memset(cmd.eirp_pwr, DEFAULT_TPE_TX_POWER, sizeof(cmd.eirp_pwr)); + + ret = iwl_mvm_send_cmd_pdu(mvm, + WIDE_ID(PHY_OPS_GROUP, + AP_TX_POWER_CONSTRAINTS_CMD), + 0, sizeof(cmd), &cmd); + if (ret) + IWL_ERR(mvm, + "failed to send AP_TX_POWER_CONSTRAINTS_CMD (%d)\n", + ret); +} + static int iwl_mvm_mld_start_ap_ibss(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *link_conf) @@ -477,6 +537,10 @@ static int iwl_mvm_mld_start_ap_ibss(struct ieee80211_hw *hw, int ret; mutex_lock(&mvm->mutex); + + if (vif->type == NL80211_IFTYPE_AP) + iwl_mvm_send_ap_tx_power_constraint_cmd(mvm, vif, link_conf); + /* Send the beacon template */ ret = iwl_mvm_mac_ctxt_beacon_changed(mvm, vif, link_conf); if (ret) @@ -595,128 +659,6 @@ static int iwl_mvm_mld_mac_sta_state(struct ieee80211_hw *hw, &callbacks); } -struct iwl_mvm_link_sel_data { - u8 link_id; - enum nl80211_band band; - enum nl80211_chan_width width; - bool active; -}; - -static bool iwl_mvm_mld_valid_link_pair(struct iwl_mvm_link_sel_data *a, - struct iwl_mvm_link_sel_data *b) -{ - return a->band != b->band; -} - -void iwl_mvm_mld_select_links(struct iwl_mvm *mvm, struct ieee80211_vif *vif, - bool valid_links_changed) -{ - struct iwl_mvm_link_sel_data data[IEEE80211_MLD_MAX_NUM_LINKS]; - unsigned long usable_links = ieee80211_vif_usable_links(vif); - u32 max_active_links = iwl_mvm_max_active_links(mvm, vif); - u16 new_active_links; - u8 link_id, n_data = 0, i, j; - - if (!IWL_MVM_AUTO_EML_ENABLE) - return; - - if (!ieee80211_vif_is_mld(vif) || usable_links == 1) - return; - - /* The logic below is a simple version that doesn't suit more than 2 - * links - */ - WARN_ON_ONCE(max_active_links > 2); - - /* if only a single active link is supported, assume that the one - * selected by higher layer for connection establishment is the best. - */ - if (max_active_links == 1 && !valid_links_changed) - return; - - /* If we are already using the maximal number of active links, don't do - * any change. This can later be optimized to pick a 'better' link pair. - */ - if (hweight16(vif->active_links) == max_active_links) - return; - - rcu_read_lock(); - - for_each_set_bit(link_id, &usable_links, IEEE80211_MLD_MAX_NUM_LINKS) { - struct ieee80211_bss_conf *link_conf = - rcu_dereference(vif->link_conf[link_id]); - - if (WARN_ON_ONCE(!link_conf)) - continue; - - data[n_data].link_id = link_id; - data[n_data].band = link_conf->chanreq.oper.chan->band; - data[n_data].width = link_conf->chanreq.oper.width; - data[n_data].active = vif->active_links & BIT(link_id); - n_data++; - } - - rcu_read_unlock(); - - /* this is expected to be the current active link */ - if (n_data == 1) - return; - - new_active_links = 0; - - /* Assume that after association only a single link is active, thus, - * select only the 2nd link - */ - if (!valid_links_changed) { - for (i = 0; i < n_data; i++) { - if (data[i].active) - break; - } - - if (WARN_ON_ONCE(i == n_data)) - return; - - for (j = 0; j < n_data; j++) { - if (i == j) - continue; - - if (iwl_mvm_mld_valid_link_pair(&data[i], &data[j])) - break; - } - - if (j != n_data) - new_active_links = BIT(data[i].link_id) | - BIT(data[j].link_id); - } else { - /* Try to find a valid link pair for EMLSR operation. If a pair - * is not found continue using the current active link. - */ - for (i = 0; i < n_data; i++) { - for (j = 0; j < n_data; j++) { - if (i == j) - continue; - - if (iwl_mvm_mld_valid_link_pair(&data[i], - &data[j])) - break; - } - - /* found a valid pair for EMLSR, use it */ - if (j != n_data) { - new_active_links = BIT(data[i].link_id) | - BIT(data[j].link_id); - break; - } - } - } - - if (!new_active_links) - return; - - if (vif->active_links != new_active_links) - ieee80211_set_active_links_async(vif, new_active_links); -} - static void iwl_mvm_mld_link_info_changed_station(struct iwl_mvm *mvm, struct ieee80211_vif *vif, @@ -761,9 +703,6 @@ iwl_mvm_mld_link_info_changed_station(struct iwl_mvm *mvm, if (ret) IWL_ERR(mvm, "failed to update MAC %pM\n", vif->addr); - if (changes & BSS_CHANGED_MLD_VALID_LINKS) - iwl_mvm_mld_select_links(mvm, vif, true); - memcpy(mvmvif->link[link_conf->link_id]->bssid, link_conf->bssid, ETH_ALEN); @@ -1184,6 +1123,14 @@ iwl_mvm_mld_change_vif_links(struct ieee80211_hw *hw, if (new_links == 0) { mvmvif->link[0] = &mvmvif->deflink; err = iwl_mvm_add_link(mvm, vif, &vif->bss_conf); + if (err == 0) + mvmvif->primary_link = 0; + } else if (!(new_links & BIT(mvmvif->primary_link))) { + /* + * Ensure we always have a valid primary_link, the real + * decision happens later when PHY is activated. + */ + mvmvif->primary_link = BIT(__ffs(new_links)); } out_err: @@ -1212,68 +1159,16 @@ iwl_mvm_mld_change_sta_links(struct ieee80211_hw *hw, return ret; } -/* - * This function receives a subset of the usable links bitmap and - * returns the primary link id, and -1 if such link doesn't exist - * (e.g. non-MLO connection) or wasn't found. - */ -int iwl_mvm_mld_get_primary_link(struct iwl_mvm *mvm, - struct ieee80211_vif *vif, - unsigned long usable_links) -{ - struct iwl_mvm_link_sel_data data[IEEE80211_MLD_MAX_NUM_LINKS]; - u8 link_id, n_data = 0; - - if (!ieee80211_vif_is_mld(vif) || !vif->cfg.assoc) - return -1; - - for_each_set_bit(link_id, &usable_links, IEEE80211_MLD_MAX_NUM_LINKS) { - struct ieee80211_bss_conf *link_conf = - link_conf_dereference_protected(vif, link_id); - - if (WARN_ON_ONCE(!link_conf)) - continue; - - data[n_data].link_id = link_id; - data[n_data].band = link_conf->chanreq.oper.chan->band; - data[n_data].width = link_conf->chanreq.oper.width; - data[n_data].active = true; - n_data++; - } - - if (n_data <= 1) - return -1; - - /* The logic should be modified to handle more than 2 links */ - WARN_ON_ONCE(n_data > 2); - - /* Primary link is the link with the wider bandwidth or higher band */ - if (data[0].width > data[1].width) - return data[0].link_id; - if (data[0].width < data[1].width) - return data[1].link_id; - if (data[0].band >= data[1].band) - return data[0].link_id; - - return data[1].link_id; -} - -/* - * This function receives a bitmap of usable links and check if we can enter - * eSR on those links. - */ -static bool iwl_mvm_can_enter_esr(struct iwl_mvm *mvm, - struct ieee80211_vif *vif, - unsigned long desired_links) +bool iwl_mvm_esr_allowed_on_vif(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); - int primary_link = iwl_mvm_mld_get_primary_link(mvm, vif, - desired_links); const struct wiphy_iftype_ext_capab *ext_capa; - bool ret = true; - int link_id; - if (primary_link < 0) + lockdep_assert_held(&mvm->mutex); + + if (!ieee80211_vif_is_mld(vif) || !vif->cfg.assoc || + hweight16(ieee80211_vif_usable_links(vif)) == 1) return false; if (!(vif->cfg.eml_cap & IEEE80211_EML_CAP_EMLSR_SUPP)) @@ -1285,26 +1180,7 @@ static bool iwl_mvm_can_enter_esr(struct iwl_mvm *mvm, !(ext_capa->eml_capabilities & IEEE80211_EML_CAP_EMLSR_SUPP)) return false; - for_each_set_bit(link_id, &desired_links, IEEE80211_MLD_MAX_NUM_LINKS) { - struct ieee80211_bss_conf *link_conf = - link_conf_dereference_protected(vif, link_id); - - if (WARN_ON_ONCE(!link_conf)) - continue; - - /* BT Coex effects eSR mode only if one of the link is on LB */ - if (link_conf->chanreq.oper.chan->band != NL80211_BAND_2GHZ) - continue; - - ret = iwl_mvm_bt_coex_calculate_esr_mode(mvm, vif, link_id, - primary_link); - // Mark eSR as disabled for the next time - if (!ret) - mvmvif->bt_coex_esr_disabled = true; - break; - } - - return ret; + return !(mvmvif->esr_disable_reason & ~IWL_MVM_ESR_BLOCKED_COEX); } static bool iwl_mvm_mld_can_activate_links(struct ieee80211_hw *hw, @@ -1327,8 +1203,9 @@ static bool iwl_mvm_mld_can_activate_links(struct ieee80211_hw *hw, } /* If it is an eSR device, check that we can enter eSR */ - if (iwl_mvm_is_esr_supported(mvm->fwrt.trans)) - ret = iwl_mvm_can_enter_esr(mvm, vif, desired_links); + ret = iwl_mvm_is_esr_supported(mvm->fwrt.trans) && + iwl_mvm_esr_allowed_on_vif(mvm, vif); + unlock: mutex_unlock(&mvm->mutex); return ret; |