diff options
Diffstat (limited to 'drivers/pci')
-rw-r--r-- | drivers/pci/bus.c | 49 | ||||
-rw-r--r-- | drivers/pci/controller/dwc/pcie-designware-ep.c | 10 | ||||
-rw-r--r-- | drivers/pci/controller/dwc/pcie-qcom.c | 2 | ||||
-rw-r--r-- | drivers/pci/hotplug/s390_pci_hpc.c | 65 | ||||
-rw-r--r-- | drivers/pci/msi/irqdomain.c | 2 | ||||
-rw-r--r-- | drivers/pci/pci.c | 119 | ||||
-rw-r--r-- | drivers/pci/pci.h | 9 | ||||
-rw-r--r-- | drivers/pci/pcie/aspm.c | 13 |
8 files changed, 170 insertions, 99 deletions
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 9c2137dae429..826b5016a101 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -386,21 +386,8 @@ void pci_bus_add_devices(const struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_add_devices); -/** pci_walk_bus - walk devices on/under bus, calling callback. - * @top bus whose devices should be walked - * @cb callback to be called for each device found - * @userdata arbitrary pointer to be passed to callback. - * - * Walk the given bus, including any bridged devices - * on buses under this bus. Call the provided callback - * on each device found. - * - * We check the return of @cb each time. If it returns anything - * other than 0, we break out. - * - */ -void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), - void *userdata) +static void __pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), + void *userdata, bool locked) { struct pci_dev *dev; struct pci_bus *bus; @@ -408,7 +395,8 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), int retval; bus = top; - down_read(&pci_bus_sem); + if (!locked) + down_read(&pci_bus_sem); next = top->devices.next; for (;;) { if (next == &bus->devices) { @@ -431,10 +419,37 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), if (retval) break; } - up_read(&pci_bus_sem); + if (!locked) + up_read(&pci_bus_sem); +} + +/** + * pci_walk_bus - walk devices on/under bus, calling callback. + * @top: bus whose devices should be walked + * @cb: callback to be called for each device found + * @userdata: arbitrary pointer to be passed to callback + * + * Walk the given bus, including any bridged devices + * on buses under this bus. Call the provided callback + * on each device found. + * + * We check the return of @cb each time. If it returns anything + * other than 0, we break out. + */ +void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata) +{ + __pci_walk_bus(top, cb, userdata, false); } EXPORT_SYMBOL_GPL(pci_walk_bus); +void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata) +{ + lockdep_assert_held(&pci_bus_sem); + + __pci_walk_bus(top, cb, userdata, true); +} +EXPORT_SYMBOL_GPL(pci_walk_bus_locked); + struct pci_bus *pci_bus_get(struct pci_bus *bus) { if (bus) diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index 5befed2dc02b..9a437cfce073 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -6,6 +6,7 @@ * Author: Kishon Vijay Abraham I <kishon@ti.com> */ +#include <linux/align.h> #include <linux/bitfield.h> #include <linux/of.h> #include <linux/platform_device.h> @@ -482,9 +483,10 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no, reg = ep_func->msi_cap + PCI_MSI_DATA_32; msg_data = dw_pcie_ep_readw_dbi(ep, func_no, reg); } - aligned_offset = msg_addr_lower & (epc->mem->window.page_size - 1); - msg_addr = ((u64)msg_addr_upper) << 32 | - (msg_addr_lower & ~aligned_offset); + msg_addr = ((u64)msg_addr_upper) << 32 | msg_addr_lower; + + aligned_offset = msg_addr & (epc->mem->window.page_size - 1); + msg_addr = ALIGN_DOWN(msg_addr, epc->mem->window.page_size); ret = dw_pcie_ep_map_addr(epc, func_no, 0, ep->msi_mem_phys, msg_addr, epc->mem->window.page_size); if (ret) @@ -551,7 +553,7 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no, } aligned_offset = msg_addr & (epc->mem->window.page_size - 1); - msg_addr &= ~aligned_offset; + msg_addr = ALIGN_DOWN(msg_addr, epc->mem->window.page_size); ret = dw_pcie_ep_map_addr(epc, func_no, 0, ep->msi_mem_phys, msg_addr, epc->mem->window.page_size); if (ret) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 10f2d0bb86be..2ce2a3bd932b 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -972,7 +972,7 @@ static int qcom_pcie_enable_aspm(struct pci_dev *pdev, void *userdata) * Downstream devices need to be in D0 state before enabling PCI PM * substates. */ - pci_set_power_state(pdev, PCI_D0); + pci_set_power_state_locked(pdev, PCI_D0); pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL); return 0; diff --git a/drivers/pci/hotplug/s390_pci_hpc.c b/drivers/pci/hotplug/s390_pci_hpc.c index a89b7de72dcf..7333b305f2a5 100644 --- a/drivers/pci/hotplug/s390_pci_hpc.c +++ b/drivers/pci/hotplug/s390_pci_hpc.c @@ -26,58 +26,79 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) hotplug_slot); int rc; - if (zdev->state != ZPCI_FN_STATE_STANDBY) - return -EIO; + mutex_lock(&zdev->state_lock); + if (zdev->state != ZPCI_FN_STATE_STANDBY) { + rc = -EIO; + goto out; + } rc = sclp_pci_configure(zdev->fid); zpci_dbg(3, "conf fid:%x, rc:%d\n", zdev->fid, rc); if (rc) - return rc; + goto out; zdev->state = ZPCI_FN_STATE_CONFIGURED; - return zpci_scan_configured_device(zdev, zdev->fh); + rc = zpci_scan_configured_device(zdev, zdev->fh); +out: + mutex_unlock(&zdev->state_lock); + return rc; } static int disable_slot(struct hotplug_slot *hotplug_slot) { struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev, hotplug_slot); - struct pci_dev *pdev; + struct pci_dev *pdev = NULL; + int rc; - if (zdev->state != ZPCI_FN_STATE_CONFIGURED) - return -EIO; + mutex_lock(&zdev->state_lock); + if (zdev->state != ZPCI_FN_STATE_CONFIGURED) { + rc = -EIO; + goto out; + } pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn); if (pdev && pci_num_vf(pdev)) { pci_dev_put(pdev); - return -EBUSY; + rc = -EBUSY; + goto out; } - pci_dev_put(pdev); - return zpci_deconfigure_device(zdev); + rc = zpci_deconfigure_device(zdev); +out: + mutex_unlock(&zdev->state_lock); + if (pdev) + pci_dev_put(pdev); + return rc; } static int reset_slot(struct hotplug_slot *hotplug_slot, bool probe) { struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev, hotplug_slot); + int rc = -EIO; - if (zdev->state != ZPCI_FN_STATE_CONFIGURED) - return -EIO; /* - * We can't take the zdev->lock as reset_slot may be called during - * probing and/or device removal which already happens under the - * zdev->lock. Instead the user should use the higher level - * pci_reset_function() or pci_bus_reset() which hold the PCI device - * lock preventing concurrent removal. If not using these functions - * holding the PCI device lock is required. + * If we can't get the zdev->state_lock the device state is + * currently undergoing a transition and we bail out - just + * the same as if the device's state is not configured at all. */ + if (!mutex_trylock(&zdev->state_lock)) + return rc; - /* As long as the function is configured we can reset */ - if (probe) - return 0; + /* We can reset only if the function is configured */ + if (zdev->state != ZPCI_FN_STATE_CONFIGURED) + goto out; + + if (probe) { + rc = 0; + goto out; + } - return zpci_hot_reset_device(zdev); + rc = zpci_hot_reset_device(zdev); +out: + mutex_unlock(&zdev->state_lock); + return rc; } static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) diff --git a/drivers/pci/msi/irqdomain.c b/drivers/pci/msi/irqdomain.c index c8be056c248d..cfd84a899c82 100644 --- a/drivers/pci/msi/irqdomain.c +++ b/drivers/pci/msi/irqdomain.c @@ -61,7 +61,7 @@ static irq_hw_number_t pci_msi_domain_calc_hwirq(struct msi_desc *desc) return (irq_hw_number_t)desc->msi_index | pci_dev_id(dev) << 11 | - (pci_domain_nr(dev->bus) & 0xFFFFFFFF) << 27; + ((irq_hw_number_t)(pci_domain_nr(dev->bus) & 0xFFFFFFFF)) << 27; } static void pci_msi_domain_set_desc(msi_alloc_info_t *arg, diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index d8f11a078924..1e33f0e2d945 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1354,6 +1354,7 @@ end: /** * pci_set_full_power_state - Put a PCI device into D0 and update its state * @dev: PCI device to power up + * @locked: whether pci_bus_sem is held * * Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register * to confirm the state change, restore its BARs if they might be lost and @@ -1363,7 +1364,7 @@ end: * to D0, it is more efficient to use pci_power_up() directly instead of this * function. */ -static int pci_set_full_power_state(struct pci_dev *dev) +static int pci_set_full_power_state(struct pci_dev *dev, bool locked) { u16 pmcsr; int ret; @@ -1399,7 +1400,7 @@ static int pci_set_full_power_state(struct pci_dev *dev) } if (dev->bus->self) - pcie_aspm_pm_state_change(dev->bus->self); + pcie_aspm_pm_state_change(dev->bus->self, locked); return 0; } @@ -1428,10 +1429,22 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state) pci_walk_bus(bus, __pci_dev_set_current_state, &state); } +static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state, bool locked) +{ + if (!bus) + return; + + if (locked) + pci_walk_bus_locked(bus, __pci_dev_set_current_state, &state); + else + pci_walk_bus(bus, __pci_dev_set_current_state, &state); +} + /** * pci_set_low_power_state - Put a PCI device into a low-power state. * @dev: PCI device to handle. * @state: PCI power state (D1, D2, D3hot) to put the device into. + * @locked: whether pci_bus_sem is held * * Use the device's PCI_PM_CTRL register to put it into a low-power state. * @@ -1442,7 +1455,7 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state) * 0 if device already is in the requested state. * 0 if device's power state has been successfully changed. */ -static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state) +static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state, bool locked) { u16 pmcsr; @@ -1496,29 +1509,12 @@ static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state) pci_power_name(state)); if (dev->bus->self) - pcie_aspm_pm_state_change(dev->bus->self); + pcie_aspm_pm_state_change(dev->bus->self, locked); return 0; } -/** - * pci_set_power_state - Set the power state of a PCI device - * @dev: PCI device to handle. - * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. - * - * Transition a device to a new power state, using the platform firmware and/or - * the device's PCI PM registers. - * - * RETURN VALUE: - * -EINVAL if the requested state is invalid. - * -EIO if device does not support PCI PM or its PM capabilities register has a - * wrong version, or device doesn't support the requested state. - * 0 if the transition is to D1 or D2 but D1 and D2 are not supported. - * 0 if device already is in the requested state. - * 0 if the transition is to D3 but D3 is not supported. - * 0 if device's power state has been successfully changed. - */ -int pci_set_power_state(struct pci_dev *dev, pci_power_t state) +static int __pci_set_power_state(struct pci_dev *dev, pci_power_t state, bool locked) { int error; @@ -1542,7 +1538,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; if (state == PCI_D0) - return pci_set_full_power_state(dev); + return pci_set_full_power_state(dev, locked); /* * This device is quirked not to be put into D3, so don't put it in @@ -1556,16 +1552,16 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) * To put the device in D3cold, put it into D3hot in the native * way, then put it into D3cold using platform ops. */ - error = pci_set_low_power_state(dev, PCI_D3hot); + error = pci_set_low_power_state(dev, PCI_D3hot, locked); if (pci_platform_power_transition(dev, PCI_D3cold)) return error; /* Powering off a bridge may power off the whole hierarchy */ if (dev->current_state == PCI_D3cold) - pci_bus_set_current_state(dev->subordinate, PCI_D3cold); + __pci_bus_set_current_state(dev->subordinate, PCI_D3cold, locked); } else { - error = pci_set_low_power_state(dev, state); + error = pci_set_low_power_state(dev, state, locked); if (pci_platform_power_transition(dev, state)) return error; @@ -1573,8 +1569,38 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } + +/** + * pci_set_power_state - Set the power state of a PCI device + * @dev: PCI device to handle. + * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * + * Transition a device to a new power state, using the platform firmware and/or + * the device's PCI PM registers. + * + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if the transition is to D1 or D2 but D1 and D2 are not supported. + * 0 if device already is in the requested state. + * 0 if the transition is to D3 but D3 is not supported. + * 0 if device's power state has been successfully changed. + */ +int pci_set_power_state(struct pci_dev *dev, pci_power_t state) +{ + return __pci_set_power_state(dev, state, false); +} EXPORT_SYMBOL(pci_set_power_state); +int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state) +{ + lockdep_assert_held(&pci_bus_sem); + + return __pci_set_power_state(dev, state, true); +} +EXPORT_SYMBOL(pci_set_power_state_locked); + #define PCI_EXP_SAVE_REGS 7 static struct pci_cap_saved_state *_pci_find_saved_cap(struct pci_dev *pci_dev, @@ -2496,29 +2522,36 @@ static void pci_pme_list_scan(struct work_struct *work) if (pdev->pme_poll) { struct pci_dev *bridge = pdev->bus->self; struct device *dev = &pdev->dev; - int pm_status; + struct device *bdev = bridge ? &bridge->dev : NULL; + int bref = 0; /* - * If bridge is in low power state, the - * configuration space of subordinate devices - * may be not accessible + * If we have a bridge, it should be in an active/D0 + * state or the configuration space of subordinate + * devices may not be accessible or stable over the + * course of the call. */ - if (bridge && bridge->current_state != PCI_D0) - continue; + if (bdev) { + bref = pm_runtime_get_if_active(bdev); + if (!bref) + continue; + + if (bridge->current_state != PCI_D0) + goto put_bridge; + } /* - * If the device is in a low power state it - * should not be polled either. + * The device itself should be suspended but config + * space must be accessible, therefore it cannot be in + * D3cold. */ - pm_status = pm_runtime_get_if_active(dev, true); - if (!pm_status) - continue; - - if (pdev->current_state != PCI_D3cold) + if (pm_runtime_suspended(dev) && + pdev->current_state != PCI_D3cold) pci_pme_wakeup(pdev, NULL); - if (pm_status > 0) - pm_runtime_put(dev); +put_bridge: + if (bref > 0) + pm_runtime_put(bdev); } else { list_del(&pme_dev->list); kfree(pme_dev); @@ -4320,8 +4353,8 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) if (res->end > IO_SPACE_LIMIT) return -EINVAL; - return ioremap_page_range(vaddr, vaddr + resource_size(res), phys_addr, - pgprot_device(PAGE_KERNEL)); + return vmap_page_range(vaddr, vaddr + resource_size(res), phys_addr, + pgprot_device(PAGE_KERNEL)); #else /* * This architecture does not have memory mapped I/O space, diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 2336a8d1edab..bfc56f7bee1c 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -368,11 +368,6 @@ static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused) return 0; } -static inline bool pci_dev_is_disconnected(const struct pci_dev *dev) -{ - return dev->error_state == pci_channel_io_perm_failure; -} - /* pci_dev priv_flags */ #define PCI_DEV_ADDED 0 #define PCI_DPC_RECOVERED 1 @@ -571,12 +566,12 @@ int pcie_retrain_link(struct pci_dev *pdev, bool use_lt); #ifdef CONFIG_PCIEASPM void pcie_aspm_init_link_state(struct pci_dev *pdev); void pcie_aspm_exit_link_state(struct pci_dev *pdev); -void pcie_aspm_pm_state_change(struct pci_dev *pdev); +void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked); void pcie_aspm_powersave_config_link(struct pci_dev *pdev); #else static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { } static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { } -static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { } +static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked) { } static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { } #endif diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 5a0066ecc3c5..bc0bd86695ec 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1003,8 +1003,11 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev) up_read(&pci_bus_sem); } -/* @pdev: the root port or switch downstream port */ -void pcie_aspm_pm_state_change(struct pci_dev *pdev) +/* + * @pdev: the root port or switch downstream port + * @locked: whether pci_bus_sem is held + */ +void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked) { struct pcie_link_state *link = pdev->link_state; @@ -1014,12 +1017,14 @@ void pcie_aspm_pm_state_change(struct pci_dev *pdev) * Devices changed PM state, we should recheck if latency * meets all functions' requirement */ - down_read(&pci_bus_sem); + if (!locked) + down_read(&pci_bus_sem); mutex_lock(&aspm_lock); pcie_update_aspm_capable(link->root); pcie_config_aspm_path(link); mutex_unlock(&aspm_lock); - up_read(&pci_bus_sem); + if (!locked) + up_read(&pci_bus_sem); } void pcie_aspm_powersave_config_link(struct pci_dev *pdev) |