diff options
Diffstat (limited to 'drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c')
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c | 146 |
1 files changed, 111 insertions, 35 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c index 52c275fbb2a1..a623f092b11f 100644 --- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c +++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c @@ -24,23 +24,73 @@ #define EUSB2_FORCE_VAL_5 0xeD #define V_CLK_19P2M_EN BIT(6) +#define EUSB2_TUNE_USB2_CROSSOVER 0x50 #define EUSB2_TUNE_IUSB2 0x51 +#define EUSB2_TUNE_RES_FSDIF 0x52 +#define EUSB2_TUNE_HSDISC 0x53 #define EUSB2_TUNE_SQUELCH_U 0x54 +#define EUSB2_TUNE_USB2_SLEW 0x55 +#define EUSB2_TUNE_USB2_EQU 0x56 #define EUSB2_TUNE_USB2_PREEM 0x57 +#define EUSB2_TUNE_USB2_HS_COMP_CUR 0x58 +#define EUSB2_TUNE_EUSB_SLEW 0x59 +#define EUSB2_TUNE_EUSB_EQU 0x5A +#define EUSB2_TUNE_EUSB_HS_COMP_CUR 0x5B -#define QCOM_EUSB2_REPEATER_INIT_CFG(o, v) \ +#define QCOM_EUSB2_REPEATER_INIT_CFG(r, v) \ { \ - .offset = o, \ + .reg = r, \ .val = v, \ } -struct eusb2_repeater_init_tbl { - unsigned int offset; - unsigned int val; +enum reg_fields { + F_TUNE_EUSB_HS_COMP_CUR, + F_TUNE_EUSB_EQU, + F_TUNE_EUSB_SLEW, + F_TUNE_USB2_HS_COMP_CUR, + F_TUNE_USB2_PREEM, + F_TUNE_USB2_EQU, + F_TUNE_USB2_SLEW, + F_TUNE_SQUELCH_U, + F_TUNE_HSDISC, + F_TUNE_RES_FSDIF, + F_TUNE_IUSB2, + F_TUNE_USB2_CROSSOVER, + F_NUM_TUNE_FIELDS, + + F_FORCE_VAL_5 = F_NUM_TUNE_FIELDS, + F_FORCE_EN_5, + + F_EN_CTL1, + + F_RPTR_STATUS, + F_NUM_FIELDS, +}; + +static struct reg_field eusb2_repeater_tune_reg_fields[F_NUM_FIELDS] = { + [F_TUNE_EUSB_HS_COMP_CUR] = REG_FIELD(EUSB2_TUNE_EUSB_HS_COMP_CUR, 0, 1), + [F_TUNE_EUSB_EQU] = REG_FIELD(EUSB2_TUNE_EUSB_EQU, 0, 1), + [F_TUNE_EUSB_SLEW] = REG_FIELD(EUSB2_TUNE_EUSB_SLEW, 0, 1), + [F_TUNE_USB2_HS_COMP_CUR] = REG_FIELD(EUSB2_TUNE_USB2_HS_COMP_CUR, 0, 1), + [F_TUNE_USB2_PREEM] = REG_FIELD(EUSB2_TUNE_USB2_PREEM, 0, 2), + [F_TUNE_USB2_EQU] = REG_FIELD(EUSB2_TUNE_USB2_EQU, 0, 1), + [F_TUNE_USB2_SLEW] = REG_FIELD(EUSB2_TUNE_USB2_SLEW, 0, 1), + [F_TUNE_SQUELCH_U] = REG_FIELD(EUSB2_TUNE_SQUELCH_U, 0, 2), + [F_TUNE_HSDISC] = REG_FIELD(EUSB2_TUNE_HSDISC, 0, 2), + [F_TUNE_RES_FSDIF] = REG_FIELD(EUSB2_TUNE_RES_FSDIF, 0, 2), + [F_TUNE_IUSB2] = REG_FIELD(EUSB2_TUNE_IUSB2, 0, 3), + [F_TUNE_USB2_CROSSOVER] = REG_FIELD(EUSB2_TUNE_USB2_CROSSOVER, 0, 2), + + [F_FORCE_VAL_5] = REG_FIELD(EUSB2_FORCE_VAL_5, 0, 7), + [F_FORCE_EN_5] = REG_FIELD(EUSB2_FORCE_EN_5, 0, 7), + + [F_EN_CTL1] = REG_FIELD(EUSB2_EN_CTL1, 0, 7), + + [F_RPTR_STATUS] = REG_FIELD(EUSB2_RPTR_STATUS, 0, 7), }; struct eusb2_repeater_cfg { - const struct eusb2_repeater_init_tbl *init_tbl; + const u32 *init_tbl; int init_tbl_num; const char * const *vreg_list; int num_vregs; @@ -48,11 +98,10 @@ struct eusb2_repeater_cfg { struct eusb2_repeater { struct device *dev; - struct regmap *regmap; + struct regmap_field *regs[F_NUM_FIELDS]; struct phy *phy; struct regulator_bulk_data *vregs; const struct eusb2_repeater_cfg *cfg; - u16 base; enum phy_mode mode; }; @@ -60,10 +109,10 @@ static const char * const pm8550b_vreg_l[] = { "vdd18", "vdd3", }; -static const struct eusb2_repeater_init_tbl pm8550b_init_tbl[] = { - QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_IUSB2, 0x8), - QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_SQUELCH_U, 0x3), - QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_USB2_PREEM, 0x5), +static const u32 pm8550b_init_tbl[F_NUM_TUNE_FIELDS] = { + [F_TUNE_IUSB2] = 0x8, + [F_TUNE_SQUELCH_U] = 0x3, + [F_TUNE_USB2_PREEM] = 0x5, }; static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = { @@ -91,9 +140,11 @@ static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr) static int eusb2_repeater_init(struct phy *phy) { + struct reg_field *regfields = eusb2_repeater_tune_reg_fields; struct eusb2_repeater *rptr = phy_get_drvdata(phy); - const struct eusb2_repeater_init_tbl *init_tbl = rptr->cfg->init_tbl; - int num = rptr->cfg->init_tbl_num; + struct device_node *np = rptr->dev->of_node; + u32 init_tbl[F_NUM_TUNE_FIELDS] = { 0 }; + u8 override; u32 val; int ret; int i; @@ -102,17 +153,34 @@ static int eusb2_repeater_init(struct phy *phy) if (ret) return ret; - regmap_update_bits(rptr->regmap, rptr->base + EUSB2_EN_CTL1, - EUSB2_RPTR_EN, EUSB2_RPTR_EN); + regmap_field_update_bits(rptr->regs[F_EN_CTL1], EUSB2_RPTR_EN, EUSB2_RPTR_EN); - for (i = 0; i < num; i++) - regmap_update_bits(rptr->regmap, - rptr->base + init_tbl[i].offset, - init_tbl[i].val, init_tbl[i].val); + for (i = 0; i < F_NUM_TUNE_FIELDS; i++) { + if (init_tbl[i]) { + regmap_field_update_bits(rptr->regs[i], init_tbl[i], init_tbl[i]); + } else { + /* Write 0 if there's no value set */ + u32 mask = GENMASK(regfields[i].msb, regfields[i].lsb); + + regmap_field_update_bits(rptr->regs[i], mask, 0); + } + } + memcpy(init_tbl, rptr->cfg->init_tbl, sizeof(init_tbl)); + + if (!of_property_read_u8(np, "qcom,tune-usb2-amplitude", &override)) + init_tbl[F_TUNE_IUSB2] = override; + + if (!of_property_read_u8(np, "qcom,tune-usb2-disc-thres", &override)) + init_tbl[F_TUNE_HSDISC] = override; - ret = regmap_read_poll_timeout(rptr->regmap, - rptr->base + EUSB2_RPTR_STATUS, val, - val & RPTR_OK, 10, 5); + if (!of_property_read_u8(np, "qcom,tune-usb2-preem", &override)) + init_tbl[F_TUNE_USB2_PREEM] = override; + + for (i = 0; i < F_NUM_TUNE_FIELDS; i++) + regmap_field_update_bits(rptr->regs[i], init_tbl[i], init_tbl[i]); + + ret = regmap_field_read_poll_timeout(rptr->regs[F_RPTR_STATUS], + val, val & RPTR_OK, 10, 5); if (ret) dev_err(rptr->dev, "initialization timed-out\n"); @@ -131,10 +199,10 @@ static int eusb2_repeater_set_mode(struct phy *phy, * per eUSB 1.2 Spec. Below implement software workaround until * PHY and controller is fixing seen observation. */ - regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, - F_CLK_19P2M_EN, F_CLK_19P2M_EN); - regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, - V_CLK_19P2M_EN, V_CLK_19P2M_EN); + regmap_field_update_bits(rptr->regs[F_FORCE_EN_5], + F_CLK_19P2M_EN, F_CLK_19P2M_EN); + regmap_field_update_bits(rptr->regs[F_FORCE_VAL_5], + V_CLK_19P2M_EN, V_CLK_19P2M_EN); break; case PHY_MODE_USB_DEVICE: /* @@ -143,10 +211,10 @@ static int eusb2_repeater_set_mode(struct phy *phy, * repeater doesn't clear previous value due to shared * regulators (say host <-> device mode switch). */ - regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, - F_CLK_19P2M_EN, 0); - regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, - V_CLK_19P2M_EN, 0); + regmap_field_update_bits(rptr->regs[F_FORCE_EN_5], + F_CLK_19P2M_EN, 0); + regmap_field_update_bits(rptr->regs[F_FORCE_VAL_5], + V_CLK_19P2M_EN, 0); break; default: return -EINVAL; @@ -175,8 +243,9 @@ static int eusb2_repeater_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct phy_provider *phy_provider; struct device_node *np = dev->of_node; + struct regmap *regmap; + int i, ret; u32 res; - int ret; rptr = devm_kzalloc(dev, sizeof(*rptr), GFP_KERNEL); if (!rptr) @@ -189,15 +258,22 @@ static int eusb2_repeater_probe(struct platform_device *pdev) if (!rptr->cfg) return -EINVAL; - rptr->regmap = dev_get_regmap(dev->parent, NULL); - if (!rptr->regmap) + regmap = dev_get_regmap(dev->parent, NULL); + if (!regmap) return -ENODEV; ret = of_property_read_u32(np, "reg", &res); if (ret < 0) return ret; - rptr->base = res; + for (i = 0; i < F_NUM_FIELDS; i++) + eusb2_repeater_tune_reg_fields[i].reg += res; + + ret = devm_regmap_field_bulk_alloc(dev, regmap, rptr->regs, + eusb2_repeater_tune_reg_fields, + F_NUM_FIELDS); + if (ret) + return ret; ret = eusb2_repeater_init_vregs(rptr); if (ret < 0) { |