summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-baytrail.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/pinctrl-baytrail.c')
-rw-r--r--drivers/pinctrl/pinctrl-baytrail.c543
1 files changed, 543 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-baytrail.c b/drivers/pinctrl/pinctrl-baytrail.c
new file mode 100644
index 000000000000..e9d735dcebfb
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-baytrail.c
@@ -0,0 +1,543 @@
+/*
+ * Pinctrl GPIO driver for Intel Baytrail
+ * Copyright (c) 2012-2013, Intel Corporation.
+ *
+ * Author: Mathias Nyman <mathias.nyman@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/acpi.h>
+#include <linux/acpi_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/pinctrl.h>
+
+/* memory mapped register offsets */
+#define BYT_CONF0_REG 0x000
+#define BYT_CONF1_REG 0x004
+#define BYT_VAL_REG 0x008
+#define BYT_DFT_REG 0x00c
+#define BYT_INT_STAT_REG 0x800
+
+/* BYT_CONF0_REG register bits */
+#define BYT_TRIG_NEG BIT(26)
+#define BYT_TRIG_POS BIT(25)
+#define BYT_TRIG_LVL BIT(24)
+#define BYT_PIN_MUX 0x07
+
+/* BYT_VAL_REG register bits */
+#define BYT_INPUT_EN BIT(2) /* 0: input enabled (active low)*/
+#define BYT_OUTPUT_EN BIT(1) /* 0: output enabled (active low)*/
+#define BYT_LEVEL BIT(0)
+
+#define BYT_DIR_MASK (BIT(1) | BIT(2))
+#define BYT_TRIG_MASK (BIT(26) | BIT(25) | BIT(24))
+
+#define BYT_NGPIO_SCORE 102
+#define BYT_NGPIO_NCORE 28
+#define BYT_NGPIO_SUS 44
+
+/*
+ * Baytrail gpio controller consist of three separate sub-controllers called
+ * SCORE, NCORE and SUS. The sub-controllers are identified by their acpi UID.
+ *
+ * GPIO numbering is _not_ ordered meaning that gpio # 0 in ACPI namespace does
+ * _not_ correspond to the first gpio register at controller's gpio base.
+ * There is no logic or pattern in mapping gpio numbers to registers (pads) so
+ * each sub-controller needs to have its own mapping table
+ */
+
+/* score_pins[gpio_nr] = pad_nr */
+
+static unsigned const score_pins[BYT_NGPIO_SCORE] = {
+ 85, 89, 93, 96, 99, 102, 98, 101, 34, 37,
+ 36, 38, 39, 35, 40, 84, 62, 61, 64, 59,
+ 54, 56, 60, 55, 63, 57, 51, 50, 53, 47,
+ 52, 49, 48, 43, 46, 41, 45, 42, 58, 44,
+ 95, 105, 70, 68, 67, 66, 69, 71, 65, 72,
+ 86, 90, 88, 92, 103, 77, 79, 83, 78, 81,
+ 80, 82, 13, 12, 15, 14, 17, 18, 19, 16,
+ 2, 1, 0, 4, 6, 7, 9, 8, 33, 32,
+ 31, 30, 29, 27, 25, 28, 26, 23, 21, 20,
+ 24, 22, 5, 3, 10, 11, 106, 87, 91, 104,
+ 97, 100,
+};
+
+static unsigned const ncore_pins[BYT_NGPIO_NCORE] = {
+ 19, 18, 17, 20, 21, 22, 24, 25, 23, 16,
+ 14, 15, 12, 26, 27, 1, 4, 8, 11, 0,
+ 3, 6, 10, 13, 2, 5, 9, 7,
+};
+
+static unsigned const sus_pins[BYT_NGPIO_SUS] = {
+ 29, 33, 30, 31, 32, 34, 36, 35, 38, 37,
+ 18, 7, 11, 20, 17, 1, 8, 10, 19, 12,
+ 0, 2, 23, 39, 28, 27, 22, 21, 24, 25,
+ 26, 51, 56, 54, 49, 55, 48, 57, 50, 58,
+ 52, 53, 59, 40,
+};
+
+static struct pinctrl_gpio_range byt_ranges[] = {
+ {
+ .name = "1", /* match with acpi _UID in probe */
+ .npins = BYT_NGPIO_SCORE,
+ .pins = score_pins,
+ },
+ {
+ .name = "2",
+ .npins = BYT_NGPIO_NCORE,
+ .pins = ncore_pins,
+ },
+ {
+ .name = "3",
+ .npins = BYT_NGPIO_SUS,
+ .pins = sus_pins,
+ },
+ {
+ },
+};
+
+struct byt_gpio {
+ struct gpio_chip chip;
+ struct irq_domain *domain;
+ struct platform_device *pdev;
+ spinlock_t lock;
+ void __iomem *reg_base;
+ struct pinctrl_gpio_range *range;
+};
+
+static void __iomem *byt_gpio_reg(struct gpio_chip *chip, unsigned offset,
+ int reg)
+{
+ struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+ u32 reg_offset;
+ void __iomem *ptr;
+
+ if (reg == BYT_INT_STAT_REG)
+ reg_offset = (offset / 32) * 4;
+ else
+ reg_offset = vg->range->pins[offset] * 16;
+
+ ptr = (void __iomem *) (vg->reg_base + reg_offset + reg);
+ return ptr;
+}
+
+static int byt_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+
+ pm_runtime_get(&vg->pdev->dev);
+
+ return 0;
+}
+
+static void byt_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+ void __iomem *reg = byt_gpio_reg(&vg->chip, offset, BYT_CONF0_REG);
+ u32 value;
+
+ /* clear interrupt triggering */
+ value = readl(reg);
+ value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+ writel(value, reg);
+
+ pm_runtime_put(&vg->pdev->dev);
+}
+
+static int byt_irq_type(struct irq_data *d, unsigned type)
+{
+ struct byt_gpio *vg = irq_data_get_irq_chip_data(d);
+ u32 offset = irqd_to_hwirq(d);
+ u32 value;
+ unsigned long flags;
+ void __iomem *reg = byt_gpio_reg(&vg->chip, offset, BYT_CONF0_REG);
+
+ if (offset >= vg->chip.ngpio)
+ return -EINVAL;
+
+ spin_lock_irqsave(&vg->lock, flags);
+ value = readl(reg);
+
+ /* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits
+ * are used to indicate high and low level triggering
+ */
+ value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ value |= BYT_TRIG_LVL;
+ case IRQ_TYPE_EDGE_RISING:
+ value |= BYT_TRIG_POS;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ value |= BYT_TRIG_LVL;
+ case IRQ_TYPE_EDGE_FALLING:
+ value |= BYT_TRIG_NEG;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ value |= (BYT_TRIG_NEG | BYT_TRIG_POS);
+ break;
+ }
+ writel(value, reg);
+
+ spin_unlock_irqrestore(&vg->lock, flags);
+
+ return 0;
+}
+
+static int byt_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
+ return readl(reg) & BYT_LEVEL;
+}
+
+static void byt_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+ void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
+ unsigned long flags;
+ u32 old_val;
+
+ spin_lock_irqsave(&vg->lock, flags);
+
+ old_val = readl(reg);
+
+ if (value)
+ writel(old_val | BYT_LEVEL, reg);
+ else
+ writel(old_val & ~BYT_LEVEL, reg);
+
+ spin_unlock_irqrestore(&vg->lock, flags);
+}
+
+static int byt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+ void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
+ unsigned long flags;
+ u32 value;
+
+ spin_lock_irqsave(&vg->lock, flags);
+
+ value = readl(reg) | BYT_DIR_MASK;
+ value = value & (~BYT_INPUT_EN); /* active low */
+ writel(value, reg);
+
+ spin_unlock_irqrestore(&vg->lock, flags);
+
+ return 0;
+}
+
+static int byt_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+ void __iomem *reg = byt_gpio_reg(chip, gpio, BYT_VAL_REG);
+ unsigned long flags;
+ u32 reg_val;
+
+ spin_lock_irqsave(&vg->lock, flags);
+
+ reg_val = readl(reg) | (BYT_DIR_MASK | !!value);
+ reg_val &= ~(BYT_OUTPUT_EN | !value);
+ writel(reg_val, reg);
+
+ spin_unlock_irqrestore(&vg->lock, flags);
+
+ return 0;
+}
+
+static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+ int i;
+ unsigned long flags;
+ u32 conf0, val, offs;
+
+ spin_lock_irqsave(&vg->lock, flags);
+
+ for (i = 0; i < vg->chip.ngpio; i++) {
+ offs = vg->range->pins[i] * 16;
+ conf0 = readl(vg->reg_base + offs + BYT_CONF0_REG);
+ val = readl(vg->reg_base + offs + BYT_VAL_REG);
+
+ seq_printf(s,
+ " gpio-%-3d %s %s %s pad-%-3d offset:0x%03x mux:%d %s%s%s\n",
+ i,
+ val & BYT_INPUT_EN ? " " : "in",
+ val & BYT_OUTPUT_EN ? " " : "out",
+ val & BYT_LEVEL ? "hi" : "lo",
+ vg->range->pins[i], offs,
+ conf0 & 0x7,
+ conf0 & BYT_TRIG_NEG ? "fall " : "",
+ conf0 & BYT_TRIG_POS ? "rise " : "",
+ conf0 & BYT_TRIG_LVL ? "lvl " : "");
+ }
+ spin_unlock_irqrestore(&vg->lock, flags);
+}
+
+static int byt_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+ return irq_create_mapping(vg->domain, offset);
+}
+
+static void byt_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct irq_data *data = irq_desc_get_irq_data(desc);
+ struct byt_gpio *vg = irq_data_get_irq_handler_data(data);
+ struct irq_chip *chip = irq_data_get_irq_chip(data);
+ u32 base, pin, mask;
+ void __iomem *reg;
+ u32 pending;
+ unsigned virq;
+ int looplimit = 0;
+
+ /* check from GPIO controller which pin triggered the interrupt */
+ for (base = 0; base < vg->chip.ngpio; base += 32) {
+
+ reg = byt_gpio_reg(&vg->chip, base, BYT_INT_STAT_REG);
+
+ while ((pending = readl(reg))) {
+ pin = __ffs(pending);
+ mask = BIT(pin);
+ /* Clear before handling so we can't lose an edge */
+ writel(mask, reg);
+
+ virq = irq_find_mapping(vg->domain, base + pin);
+ generic_handle_irq(virq);
+
+ /* In case bios or user sets triggering incorretly a pin
+ * might remain in "interrupt triggered" state.
+ */
+ if (looplimit++ > 32) {
+ dev_err(&vg->pdev->dev,
+ "Gpio %d interrupt flood, disabling\n",
+ base + pin);
+
+ reg = byt_gpio_reg(&vg->chip, base + pin,
+ BYT_CONF0_REG);
+ mask = readl(reg);
+ mask &= ~(BYT_TRIG_NEG | BYT_TRIG_POS |
+ BYT_TRIG_LVL);
+ writel(mask, reg);
+ mask = readl(reg); /* flush */
+ break;
+ }
+ }
+ }
+ chip->irq_eoi(data);
+}
+
+static void byt_irq_unmask(struct irq_data *d)
+{
+}
+
+static void byt_irq_mask(struct irq_data *d)
+{
+}
+
+static struct irq_chip byt_irqchip = {
+ .name = "BYT-GPIO",
+ .irq_mask = byt_irq_mask,
+ .irq_unmask = byt_irq_unmask,
+ .irq_set_type = byt_irq_type,
+};
+
+static void byt_gpio_irq_init_hw(struct byt_gpio *vg)
+{
+ void __iomem *reg;
+ u32 base, value;
+
+ /* clear interrupt status trigger registers */
+ for (base = 0; base < vg->chip.ngpio; base += 32) {
+ reg = byt_gpio_reg(&vg->chip, base, BYT_INT_STAT_REG);
+ writel(0xffffffff, reg);
+ /* make sure trigger bits are cleared, if not then a pin
+ might be misconfigured in bios */
+ value = readl(reg);
+ if (value)
+ dev_err(&vg->pdev->dev,
+ "GPIO interrupt error, pins misconfigured\n");
+ }
+}
+
+static int byt_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct byt_gpio *vg = d->host_data;
+
+ irq_set_chip_and_handler_name(virq, &byt_irqchip, handle_simple_irq,
+ "demux");
+ irq_set_chip_data(virq, vg);
+ irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static const struct irq_domain_ops byt_gpio_irq_ops = {
+ .map = byt_gpio_irq_map,
+};
+
+static int byt_gpio_probe(struct platform_device *pdev)
+{
+ struct byt_gpio *vg;
+ struct gpio_chip *gc;
+ struct resource *mem_rc, *irq_rc;
+ struct device *dev = &pdev->dev;
+ struct acpi_device *acpi_dev;
+ struct pinctrl_gpio_range *range;
+ acpi_handle handle = ACPI_HANDLE(dev);
+ unsigned hwirq;
+ int ret;
+
+ if (acpi_bus_get_device(handle, &acpi_dev))
+ return -ENODEV;
+
+ vg = devm_kzalloc(dev, sizeof(struct byt_gpio), GFP_KERNEL);
+ if (!vg) {
+ dev_err(&pdev->dev, "can't allocate byt_gpio chip data\n");
+ return -ENOMEM;
+ }
+
+ for (range = byt_ranges; range->name; range++) {
+ if (!strcmp(acpi_dev->pnp.unique_id, range->name)) {
+ vg->chip.ngpio = range->npins;
+ vg->range = range;
+ break;
+ }
+ }
+
+ if (!vg->chip.ngpio || !vg->range)
+ return -ENODEV;
+
+ vg->pdev = pdev;
+ platform_set_drvdata(pdev, vg);
+
+ mem_rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ vg->reg_base = devm_ioremap_resource(dev, mem_rc);
+ if (IS_ERR(vg->reg_base))
+ return PTR_ERR(vg->reg_base);
+
+ spin_lock_init(&vg->lock);
+
+ gc = &vg->chip;
+ gc->label = dev_name(&pdev->dev);
+ gc->owner = THIS_MODULE;
+ gc->request = byt_gpio_request;
+ gc->free = byt_gpio_free;
+ gc->direction_input = byt_gpio_direction_input;
+ gc->direction_output = byt_gpio_direction_output;
+ gc->get = byt_gpio_get;
+ gc->set = byt_gpio_set;
+ gc->dbg_show = byt_gpio_dbg_show;
+ gc->base = -1;
+ gc->can_sleep = 0;
+ gc->dev = dev;
+
+ ret = gpiochip_add(gc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed adding byt-gpio chip\n");
+ return ret;
+ }
+
+ /* set up interrupts */
+ irq_rc = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq_rc && irq_rc->start) {
+ hwirq = irq_rc->start;
+ gc->to_irq = byt_gpio_to_irq;
+
+ vg->domain = irq_domain_add_linear(NULL, gc->ngpio,
+ &byt_gpio_irq_ops, vg);
+ if (!vg->domain)
+ return -ENXIO;
+
+ byt_gpio_irq_init_hw(vg);
+
+ irq_set_handler_data(hwirq, vg);
+ irq_set_chained_handler(hwirq, byt_gpio_irq_handler);
+
+ /* Register interrupt handlers for gpio signaled acpi events */
+ acpi_gpiochip_request_interrupts(gc);
+ }
+
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+
+static int byt_gpio_runtime_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int byt_gpio_runtime_resume(struct device *dev)
+{
+ return 0;
+}
+
+static const struct dev_pm_ops byt_gpio_pm_ops = {
+ .runtime_suspend = byt_gpio_runtime_suspend,
+ .runtime_resume = byt_gpio_runtime_resume,
+};
+
+static const struct acpi_device_id byt_gpio_acpi_match[] = {
+ { "INT33B2", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, byt_gpio_acpi_match);
+
+static int byt_gpio_remove(struct platform_device *pdev)
+{
+ struct byt_gpio *vg = platform_get_drvdata(pdev);
+ int err;
+ pm_runtime_disable(&pdev->dev);
+ err = gpiochip_remove(&vg->chip);
+ if (err)
+ dev_warn(&pdev->dev, "failed to remove gpio_chip.\n");
+
+ return 0;
+}
+
+static struct platform_driver byt_gpio_driver = {
+ .probe = byt_gpio_probe,
+ .remove = byt_gpio_remove,
+ .driver = {
+ .name = "byt_gpio",
+ .owner = THIS_MODULE,
+ .pm = &byt_gpio_pm_ops,
+ .acpi_match_table = ACPI_PTR(byt_gpio_acpi_match),
+ },
+};
+
+static int __init byt_gpio_init(void)
+{
+ return platform_driver_register(&byt_gpio_driver);
+}
+
+subsys_initcall(byt_gpio_init);