diff options
Diffstat (limited to 'drivers/pinctrl/pinctrl-mcp23s08.c')
| -rw-r--r-- | drivers/pinctrl/pinctrl-mcp23s08.c | 122 |
1 files changed, 6 insertions, 116 deletions
diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c index 5d7a8514def9..3a235487e38d 100644 --- a/drivers/pinctrl/pinctrl-mcp23s08.c +++ b/drivers/pinctrl/pinctrl-mcp23s08.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* MCP23S08 SPI/I2C GPIO driver */ #include <linux/kernel.h> @@ -266,7 +267,6 @@ static int mcp_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, status = (data & BIT(pin)) ? 1 : 0; break; default: - dev_err(mcp->dev, "Invalid config param %04x\n", param); return -ENOTSUPP; } @@ -293,7 +293,7 @@ static int mcp_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, ret = mcp_set_bit(mcp, MCP_GPPU, pin, arg); break; default: - dev_err(mcp->dev, "Invalid config param %04x\n", param); + dev_dbg(mcp->dev, "Invalid config param %04x\n", param); return -ENOTSUPP; } } @@ -656,115 +656,6 @@ static int mcp23s08_irqchip_setup(struct mcp23s08 *mcp) /*----------------------------------------------------------------------*/ -#ifdef CONFIG_DEBUG_FS - -#include <linux/seq_file.h> - -/* - * This compares the chip's registers with the register - * cache and corrects any incorrectly set register. This - * can be used to fix state for MCP23xxx, that temporary - * lost its power supply. - */ -#define MCP23S08_CONFIG_REGS 7 -static int __check_mcp23s08_reg_cache(struct mcp23s08 *mcp) -{ - int cached[MCP23S08_CONFIG_REGS]; - int err = 0, i; - - /* read cached config registers */ - for (i = 0; i < MCP23S08_CONFIG_REGS; i++) { - err = mcp_read(mcp, i, &cached[i]); - if (err) - goto out; - } - - regcache_cache_bypass(mcp->regmap, true); - - for (i = 0; i < MCP23S08_CONFIG_REGS; i++) { - int uncached; - err = mcp_read(mcp, i, &uncached); - if (err) - goto out; - - if (uncached != cached[i]) { - dev_err(mcp->dev, "restoring reg 0x%02x from 0x%04x to 0x%04x (power-loss?)\n", - i, uncached, cached[i]); - mcp_write(mcp, i, cached[i]); - } - } - -out: - if (err) - dev_err(mcp->dev, "read error: reg=%02x, err=%d", i, err); - regcache_cache_bypass(mcp->regmap, false); - return err; -} - -/* - * This shows more info than the generic gpio dump code: - * pullups, deglitching, open drain drive. - */ -static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip) -{ - struct mcp23s08 *mcp; - char bank; - int t; - unsigned mask; - int iodir, gpio, gppu; - - mcp = gpiochip_get_data(chip); - - /* NOTE: we only handle one bank for now ... */ - bank = '0' + ((mcp->addr >> 1) & 0x7); - - mutex_lock(&mcp->lock); - - t = __check_mcp23s08_reg_cache(mcp); - if (t) { - seq_printf(s, " I/O Error\n"); - goto done; - } - t = mcp_read(mcp, MCP_IODIR, &iodir); - if (t) { - seq_printf(s, " I/O Error\n"); - goto done; - } - t = mcp_read(mcp, MCP_GPIO, &gpio); - if (t) { - seq_printf(s, " I/O Error\n"); - goto done; - } - t = mcp_read(mcp, MCP_GPPU, &gppu); - if (t) { - seq_printf(s, " I/O Error\n"); - goto done; - } - - for (t = 0, mask = BIT(0); t < chip->ngpio; t++, mask <<= 1) { - const char *label; - - label = gpiochip_is_requested(chip, t); - if (!label) - continue; - - seq_printf(s, " gpio-%-3d P%c.%d (%-12s) %s %s %s\n", - chip->base + t, bank, t, label, - (iodir & mask) ? "in " : "out", - (gpio & mask) ? "hi" : "lo", - (gppu & mask) ? "up" : " "); - /* NOTE: ignoring the irq-related registers */ - } -done: - mutex_unlock(&mcp->lock); -} - -#else -#define mcp23s08_dbg_show NULL -#endif - -/*----------------------------------------------------------------------*/ - static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, void *data, unsigned addr, unsigned type, unsigned int base, int cs) @@ -785,7 +676,6 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, mcp->chip.get = mcp23s08_get; mcp->chip.direction_output = mcp23s08_direction_output; mcp->chip.set = mcp23s08_set; - mcp->chip.dbg_show = mcp23s08_dbg_show; #ifdef CONFIG_OF_GPIO mcp->chip.of_gpio_n_cells = 2; mcp->chip.of_node = dev->of_node; @@ -881,6 +771,10 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, if (ret < 0) goto fail; + ret = devm_gpiochip_add_data(dev, &mcp->chip, mcp); + if (ret < 0) + goto fail; + mcp->irq_controller = device_property_read_bool(dev, "interrupt-controller"); if (mcp->irq && mcp->irq_controller) { @@ -922,10 +816,6 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, goto fail; } - ret = devm_gpiochip_add_data(dev, &mcp->chip, mcp); - if (ret < 0) - goto fail; - if (one_regmap_config) { mcp->pinctrl_desc.name = devm_kasprintf(dev, GFP_KERNEL, "mcp23xxx-pinctrl.%d", raw_chip_address); |