summaryrefslogtreecommitdiff
path: root/drivers/power/supply/ab8500_fg.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power/supply/ab8500_fg.c')
-rw-r--r--drivers/power/supply/ab8500_fg.c373
1 files changed, 173 insertions, 200 deletions
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 05fe9724ba50..b0919a6a6587 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -38,7 +38,6 @@
#include "ab8500-bm.h"
-#define MILLI_TO_MICRO 1000
#define FG_LSB_IN_MA 1627
#define QLSB_NANO_AMP_HOURS_X10 1071
#define INS_CURR_TIMEOUT (3 * HZ)
@@ -157,10 +156,10 @@ struct inst_curr_result_list {
* @dev: Pointer to the structure device
* @node: a list of AB8500 FGs, hence prepared for reentrance
* @irq holds the CCEOC interrupt number
- * @vbat: Battery voltage in mV
- * @vbat_nom: Nominal battery voltage in mV
- * @inst_curr: Instantenous battery current in mA
- * @avg_curr: Average battery current in mA
+ * @vbat_uv: Battery voltage in uV
+ * @vbat_nom_uv: Nominal battery voltage in uV
+ * @inst_curr_ua: Instantenous battery current in uA
+ * @avg_curr_ua: Average battery current in uA
* @bat_temp battery temperature
* @fg_samples: Number of samples used in the FG accumulation
* @accu_charge: Accumulated charge from the last conversion
@@ -199,10 +198,10 @@ struct ab8500_fg {
struct device *dev;
struct list_head node;
int irq;
- int vbat;
- int vbat_nom;
- int inst_curr;
- int avg_curr;
+ int vbat_uv;
+ int vbat_nom_uv;
+ int inst_curr_ua;
+ int avg_curr_ua;
int bat_temp;
int fg_samples;
int accu_charge;
@@ -266,84 +265,84 @@ static enum power_supply_property ab8500_fg_props[] = {
/*
* This array maps the raw hex value to lowbat voltage used by the AB8500
- * Values taken from the UM0836
+ * Values taken from the UM0836, in microvolts.
*/
static int ab8500_fg_lowbat_voltage_map[] = {
- 2300 ,
- 2325 ,
- 2350 ,
- 2375 ,
- 2400 ,
- 2425 ,
- 2450 ,
- 2475 ,
- 2500 ,
- 2525 ,
- 2550 ,
- 2575 ,
- 2600 ,
- 2625 ,
- 2650 ,
- 2675 ,
- 2700 ,
- 2725 ,
- 2750 ,
- 2775 ,
- 2800 ,
- 2825 ,
- 2850 ,
- 2875 ,
- 2900 ,
- 2925 ,
- 2950 ,
- 2975 ,
- 3000 ,
- 3025 ,
- 3050 ,
- 3075 ,
- 3100 ,
- 3125 ,
- 3150 ,
- 3175 ,
- 3200 ,
- 3225 ,
- 3250 ,
- 3275 ,
- 3300 ,
- 3325 ,
- 3350 ,
- 3375 ,
- 3400 ,
- 3425 ,
- 3450 ,
- 3475 ,
- 3500 ,
- 3525 ,
- 3550 ,
- 3575 ,
- 3600 ,
- 3625 ,
- 3650 ,
- 3675 ,
- 3700 ,
- 3725 ,
- 3750 ,
- 3775 ,
- 3800 ,
- 3825 ,
- 3850 ,
- 3850 ,
+ 2300000,
+ 2325000,
+ 2350000,
+ 2375000,
+ 2400000,
+ 2425000,
+ 2450000,
+ 2475000,
+ 2500000,
+ 2525000,
+ 2550000,
+ 2575000,
+ 2600000,
+ 2625000,
+ 2650000,
+ 2675000,
+ 2700000,
+ 2725000,
+ 2750000,
+ 2775000,
+ 2800000,
+ 2825000,
+ 2850000,
+ 2875000,
+ 2900000,
+ 2925000,
+ 2950000,
+ 2975000,
+ 3000000,
+ 3025000,
+ 3050000,
+ 3075000,
+ 3100000,
+ 3125000,
+ 3150000,
+ 3175000,
+ 3200000,
+ 3225000,
+ 3250000,
+ 3275000,
+ 3300000,
+ 3325000,
+ 3350000,
+ 3375000,
+ 3400000,
+ 3425000,
+ 3450000,
+ 3475000,
+ 3500000,
+ 3525000,
+ 3550000,
+ 3575000,
+ 3600000,
+ 3625000,
+ 3650000,
+ 3675000,
+ 3700000,
+ 3725000,
+ 3750000,
+ 3775000,
+ 3800000,
+ 3825000,
+ 3850000,
+ 3850000,
};
-static u8 ab8500_volt_to_regval(int voltage)
+static u8 ab8500_volt_to_regval(int voltage_uv)
{
int i;
- if (voltage < ab8500_fg_lowbat_voltage_map[0])
+ if (voltage_uv < ab8500_fg_lowbat_voltage_map[0])
return 0;
for (i = 0; i < ARRAY_SIZE(ab8500_fg_lowbat_voltage_map); i++) {
- if (voltage < ab8500_fg_lowbat_voltage_map[i])
+ if (voltage_uv < ab8500_fg_lowbat_voltage_map[i])
return (u8) i - 1;
}
@@ -354,16 +353,16 @@ static u8 ab8500_volt_to_regval(int voltage)
/**
* ab8500_fg_is_low_curr() - Low or high current mode
* @di: pointer to the ab8500_fg structure
- * @curr: the current to base or our decision on
+ * @curr_ua: the current to base or our decision on in microampere
*
* Low current mode if the current consumption is below a certain threshold
*/
-static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr)
+static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr_ua)
{
/*
* We want to know if we're in low current mode
*/
- if (curr > -di->bm->fg_params->high_curr_threshold)
+ if (curr_ua > -di->bm->fg_params->high_curr_threshold_ua)
return true;
else
return false;
@@ -601,13 +600,13 @@ int ab8500_fg_inst_curr_done(struct ab8500_fg *di)
/**
* ab8500_fg_inst_curr_finalize() - battery instantaneous current
* @di: pointer to the ab8500_fg structure
- * @res: battery instantenous current(on success)
+ * @curr_ua: battery instantenous current in microampere (on success)
*
* Returns 0 or an error code
* Note: This is part "two" and has to be called at earliest 250 ms
* after ab8500_fg_inst_curr_start()
*/
-int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
+int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *curr_ua)
{
u8 low, high;
int val;
@@ -663,14 +662,13 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
/*
* Convert to unit value in mA
* Full scale input voltage is
- * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542mA
+ * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542.000 uA
* Given a 250ms conversion cycle time the LSB corresponds
* to 107.1 nAh. Convert to current by dividing by the conversion
* time in hours (250ms = 1 / (3600 * 4)h)
* 107.1nAh assumes 10mOhm, but fg_res is in 0.1mOhm
*/
- val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) /
- (1000 * di->bm->fg_res);
+ val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) / di->bm->fg_res;
if (di->turn_off_fg) {
dev_dbg(di->dev, "%s Disable FG\n", __func__);
@@ -688,7 +686,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
goto fail;
}
mutex_unlock(&di->cc_lock);
- (*res) = val;
+ *curr_ua = val;
return 0;
fail:
@@ -699,15 +697,15 @@ fail:
/**
* ab8500_fg_inst_curr_blocking() - battery instantaneous current
* @di: pointer to the ab8500_fg structure
- * @res: battery instantenous current(on success)
*
- * Returns 0 else error code
+ * Returns battery instantenous current in microampere (on success)
+ * else error code
*/
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di)
{
int ret;
unsigned long timeout;
- int res = 0;
+ int curr_ua = 0;
ret = ab8500_fg_inst_curr_start(di);
if (ret) {
@@ -730,14 +728,14 @@ int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di)
}
}
- ret = ab8500_fg_inst_curr_finalize(di, &res);
+ ret = ab8500_fg_inst_curr_finalize(di, &curr_ua);
if (ret) {
dev_err(di->dev, "Failed to finalize fg_inst\n");
return 0;
}
- dev_dbg(di->dev, "%s instant current: %d", __func__, res);
- return res;
+ dev_dbg(di->dev, "%s instant current: %d uA", __func__, curr_ua);
+ return curr_ua;
fail:
disable_irq(di->irq);
mutex_unlock(&di->cc_lock);
@@ -797,13 +795,12 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work)
(100 * di->bm->fg_res);
/*
- * Convert to unit value in mA
+ * Convert to unit value in uA
* by dividing by the conversion
* time in hours (= samples / (3600 * 4)h)
- * and multiply with 1000
*/
- di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) /
- (1000 * di->bm->fg_res * (di->fg_samples / 4));
+ di->avg_curr_ua = (val * QLSB_NANO_AMP_HOURS_X10 * 36) /
+ (di->bm->fg_res * (di->fg_samples / 4));
di->flags.conv_done = true;
@@ -825,7 +822,7 @@ exit:
* ab8500_fg_bat_voltage() - get battery voltage
* @di: pointer to the ab8500_fg structure
*
- * Returns battery voltage(on success) else error code
+ * Returns battery voltage in microvolts (on success) else error code
*/
static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
{
@@ -840,6 +837,8 @@ static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
return prev;
}
+ /* IIO returns millivolts but we want microvolts */
+ vbat *= 1000;
prev = vbat;
return vbat;
}
@@ -847,41 +846,16 @@ static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
/**
* ab8500_fg_volt_to_capacity() - Voltage based capacity
* @di: pointer to the ab8500_fg structure
- * @voltage: The voltage to convert to a capacity
+ * @voltage_uv: The voltage to convert to a capacity in microvolt
*
* Returns battery capacity in per mille based on voltage
*/
-static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage)
+static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage_uv)
{
- int i, tbl_size;
- const struct ab8500_v_to_cap *tbl;
- int cap = 0;
-
- tbl = di->bm->bat_type[di->bm->batt_id].v_to_cap_tbl;
- tbl_size = di->bm->bat_type[di->bm->batt_id].n_v_cap_tbl_elements;
-
- for (i = 0; i < tbl_size; ++i) {
- if (voltage > tbl[i].voltage)
- break;
- }
-
- if ((i > 0) && (i < tbl_size)) {
- cap = fixp_linear_interpolate(
- tbl[i].voltage,
- tbl[i].capacity * 10,
- tbl[i-1].voltage,
- tbl[i-1].capacity * 10,
- voltage);
- } else if (i == 0) {
- cap = 1000;
- } else {
- cap = 0;
- }
-
- dev_dbg(di->dev, "%s Vbat: %d, Cap: %d per mille",
- __func__, voltage, cap);
+ struct power_supply_battery_info *bi = di->bm->bi;
- return cap;
+ /* Multiply by 10 because the capacity is tracked in per mille */
+ return power_supply_batinfo_ocv2cap(bi, voltage_uv, di->bat_temp) * 10;
}
/**
@@ -893,8 +867,8 @@ static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage)
*/
static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di)
{
- di->vbat = ab8500_fg_bat_voltage(di);
- return ab8500_fg_volt_to_capacity(di, di->vbat);
+ di->vbat_uv = ab8500_fg_bat_voltage(di);
+ return ab8500_fg_volt_to_capacity(di, di->vbat_uv);
}
/**
@@ -902,44 +876,35 @@ static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di)
* @di: pointer to the ab8500_fg structure
*
* Returns battery inner resistance added with the fuel gauge resistor value
- * to get the total resistance in the whole link from gnd to bat+ node.
+ * to get the total resistance in the whole link from gnd to bat+ node
+ * in milliohm.
*/
static int ab8500_fg_battery_resistance(struct ab8500_fg *di)
{
- int i, tbl_size;
- const struct batres_vs_temp *tbl;
- int resist = 0;
+ struct power_supply_battery_info *bi = di->bm->bi;
+ int resistance_percent = 0;
+ int resistance;
- tbl = di->bm->bat_type[di->bm->batt_id].batres_tbl;
- tbl_size = di->bm->bat_type[di->bm->batt_id].n_batres_tbl_elements;
-
- for (i = 0; i < tbl_size; ++i) {
- if (di->bat_temp / 10 > tbl[i].temp)
- break;
- }
-
- if ((i > 0) && (i < tbl_size)) {
- resist = fixp_linear_interpolate(
- tbl[i].temp,
- tbl[i].resist,
- tbl[i-1].temp,
- tbl[i-1].resist,
- di->bat_temp / 10);
- } else if (i == 0) {
- resist = tbl[0].resist;
- } else {
- resist = tbl[tbl_size - 1].resist;
- }
+ resistance_percent = power_supply_temp2resist_simple(bi->resist_table,
+ bi->resist_table_size,
+ di->bat_temp / 10);
+ /*
+ * We get a percentage of factory resistance here so first get
+ * the factory resistance in milliohms then calculate how much
+ * resistance we have at this temperature.
+ */
+ resistance = (bi->factory_internal_resistance_uohm / 1000);
+ resistance = resistance * resistance_percent / 100;
dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d"
" fg resistance %d, total: %d (mOhm)\n",
- __func__, di->bat_temp, resist, di->bm->fg_res / 10,
- (di->bm->fg_res / 10) + resist);
+ __func__, di->bat_temp, resistance, di->bm->fg_res / 10,
+ (di->bm->fg_res / 10) + resistance);
/* fg_res variable is in 0.1mOhm */
- resist += di->bm->fg_res / 10;
+ resistance += di->bm->fg_res / 10;
- return resist;
+ return resistance;
}
/**
@@ -951,31 +916,34 @@ static int ab8500_fg_battery_resistance(struct ab8500_fg *di)
*/
static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di)
{
- int vbat_comp, res;
+ int vbat_comp_uv, res;
int i = 0;
- int vbat = 0;
+ int vbat_uv = 0;
ab8500_fg_inst_curr_start(di);
do {
- vbat += ab8500_fg_bat_voltage(di);
+ vbat_uv += ab8500_fg_bat_voltage(di);
i++;
usleep_range(5000, 6000);
} while (!ab8500_fg_inst_curr_done(di));
- ab8500_fg_inst_curr_finalize(di, &di->inst_curr);
+ ab8500_fg_inst_curr_finalize(di, &di->inst_curr_ua);
- di->vbat = vbat / i;
+ di->vbat_uv = vbat_uv / i;
res = ab8500_fg_battery_resistance(di);
- /* Use Ohms law to get the load compensated voltage */
- vbat_comp = di->vbat - (di->inst_curr * res) / 1000;
+ /*
+ * Use Ohms law to get the load compensated voltage.
+ * Divide by 1000 to get from milliohms to ohms.
+ */
+ vbat_comp_uv = di->vbat_uv - (di->inst_curr_ua * res) / 1000;
- dev_dbg(di->dev, "%s Measured Vbat: %dmV,Compensated Vbat %dmV, "
- "R: %dmOhm, Current: %dmA Vbat Samples: %d\n",
- __func__, di->vbat, vbat_comp, res, di->inst_curr, i);
+ dev_dbg(di->dev, "%s Measured Vbat: %d uV,Compensated Vbat %d uV, "
+ "R: %d mOhm, Current: %d uA Vbat Samples: %d\n",
+ __func__, di->vbat_uv, vbat_comp_uv, res, di->inst_curr_ua, i);
- return ab8500_fg_volt_to_capacity(di, vbat_comp);
+ return ab8500_fg_volt_to_capacity(di, vbat_comp_uv);
}
/**
@@ -1014,11 +982,16 @@ static int ab8500_fg_convert_mah_to_uwh(struct ab8500_fg *di, int cap_mah)
u64 div_res;
u32 div_rem;
- div_res = ((u64) cap_mah) * ((u64) di->vbat_nom);
- div_rem = do_div(div_res, 1000);
+ /*
+ * Capacity is in milli ampere hours (10^-3)Ah
+ * Nominal voltage is in microvolts (10^-6)V
+ * divide by 1000000 after multiplication to get to mWh
+ */
+ div_res = ((u64) cap_mah) * ((u64) di->vbat_nom_uv);
+ div_rem = do_div(div_res, 1000000);
/* Make sure to round upwards if necessary */
- if (div_rem >= 1000 / 2)
+ if (div_rem >= 1000000 / 2)
div_res++;
return (int) div_res;
@@ -1057,8 +1030,8 @@ static int ab8500_fg_calc_cap_charging(struct ab8500_fg *di)
ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
/* We need to update battery voltage and inst current when charging */
- di->vbat = ab8500_fg_bat_voltage(di);
- di->inst_curr = ab8500_fg_inst_curr_blocking(di);
+ di->vbat_uv = ab8500_fg_bat_voltage(di);
+ di->inst_curr_ua = ab8500_fg_inst_curr_blocking(di);
return di->bat_cap.mah;
}
@@ -1585,9 +1558,9 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
* RECOVERY_SLEEP if time left.
* If high, go to READOUT
*/
- di->inst_curr = ab8500_fg_inst_curr_blocking(di);
+ di->inst_curr_ua = ab8500_fg_inst_curr_blocking(di);
- if (ab8500_fg_is_low_curr(di, di->inst_curr)) {
+ if (ab8500_fg_is_low_curr(di, di->inst_curr_ua)) {
if (di->recovery_cnt >
di->bm->fg_params->recovery_total_time) {
di->fg_samples = SEC_TO_SAMPLE(
@@ -1620,9 +1593,9 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
break;
case AB8500_FG_DISCHARGE_READOUT:
- di->inst_curr = ab8500_fg_inst_curr_blocking(di);
+ di->inst_curr_ua = ab8500_fg_inst_curr_blocking(di);
- if (ab8500_fg_is_low_curr(di, di->inst_curr)) {
+ if (ab8500_fg_is_low_curr(di, di->inst_curr_ua)) {
/* Detect mode change */
if (di->high_curr_mode) {
di->high_curr_mode = false;
@@ -1768,9 +1741,9 @@ static void ab8500_fg_algorithm(struct ab8500_fg *di)
di->bat_cap.prev_mah,
di->bat_cap.prev_percent,
di->bat_cap.prev_level,
- di->vbat,
- di->inst_curr,
- di->avg_curr,
+ di->vbat_uv,
+ di->inst_curr_ua,
+ di->avg_curr_ua,
di->accu_charge,
di->flags.charging,
di->charge_state,
@@ -1863,15 +1836,15 @@ static void ab8500_fg_check_hw_failure_work(struct work_struct *work)
*/
static void ab8500_fg_low_bat_work(struct work_struct *work)
{
- int vbat;
+ int vbat_uv;
struct ab8500_fg *di = container_of(work, struct ab8500_fg,
fg_low_bat_work.work);
- vbat = ab8500_fg_bat_voltage(di);
+ vbat_uv = ab8500_fg_bat_voltage(di);
/* Check if LOW_BAT still fulfilled */
- if (vbat < di->bm->fg_params->lowbat_threshold) {
+ if (vbat_uv < di->bm->fg_params->lowbat_threshold_uv) {
/* Is it time to shut down? */
if (di->low_bat_cnt < 1) {
di->flags.low_bat = true;
@@ -2101,15 +2074,15 @@ static int ab8500_fg_get_property(struct power_supply *psy,
switch (psp) {
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
if (di->flags.bat_ovv)
- val->intval = BATT_OVV_VALUE * 1000;
+ val->intval = BATT_OVV_VALUE;
else
- val->intval = di->vbat * 1000;
+ val->intval = di->vbat_uv;
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
- val->intval = di->inst_curr * 1000;
+ val->intval = di->inst_curr_ua;
break;
case POWER_SUPPLY_PROP_CURRENT_AVG:
- val->intval = di->avg_curr * 1000;
+ val->intval = di->avg_curr_ua;
break;
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
val->intval = ab8500_fg_convert_mah_to_uwh(di,
@@ -2167,11 +2140,13 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
struct power_supply *ext = dev_get_drvdata(dev);
const char **supplicants = (const char **)ext->supplied_to;
struct ab8500_fg *di;
+ struct power_supply_battery_info *bi;
union power_supply_propval ret;
int j;
psy = (struct power_supply *)data;
di = power_supply_get_drvdata(psy);
+ bi = di->bm->bi;
/*
* For all psy where the name of your driver
@@ -2234,21 +2209,22 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
switch (ext->desc->type) {
case POWER_SUPPLY_TYPE_BATTERY:
if (!di->flags.batt_id_received &&
- di->bm->batt_id != BATTERY_UNKNOWN) {
+ (bi && (bi->technology !=
+ POWER_SUPPLY_TECHNOLOGY_UNKNOWN))) {
const struct ab8500_battery_type *b;
- b = &(di->bm->bat_type[di->bm->batt_id]);
+ b = di->bm->bat_type;
di->flags.batt_id_received = true;
di->bat_cap.max_mah_design =
- MILLI_TO_MICRO *
- b->charge_full_design;
+ di->bm->bi->charge_full_design_uah;
di->bat_cap.max_mah =
di->bat_cap.max_mah_design;
- di->vbat_nom = b->nominal_voltage;
+ di->vbat_nom_uv =
+ di->bm->bi->voltage_max_design_uv;
}
if (ret.intval)
@@ -2314,7 +2290,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
AB8500_SYS_CTRL2_BLOCK,
AB8500_LOW_BAT_REG,
ab8500_volt_to_regval(
- di->bm->fg_params->lowbat_threshold) << 1 |
+ di->bm->fg_params->lowbat_threshold_uv) << 1 |
LOW_BAT_ENABLE);
if (ret) {
dev_err(di->dev, "%s write failed\n", __func__);
@@ -3018,6 +2994,10 @@ static int ab8500_fg_bind(struct device *dev, struct device *master,
return -ENOMEM;
}
+ di->bat_cap.max_mah_design = di->bm->bi->charge_full_design_uah;
+ di->bat_cap.max_mah = di->bat_cap.max_mah_design;
+ di->vbat_nom_uv = di->bm->bi->voltage_max_design_uv;
+
/* Start the coulomb counter */
ab8500_fg_coulomb_counter(di, true);
/* Run the FG algorithm */
@@ -3077,13 +3057,6 @@ static int ab8500_fg_probe(struct platform_device *pdev)
psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
psy_cfg.drv_data = di;
- di->bat_cap.max_mah_design = MILLI_TO_MICRO *
- di->bm->bat_type[di->bm->batt_id].charge_full_design;
-
- di->bat_cap.max_mah = di->bat_cap.max_mah_design;
-
- di->vbat_nom = di->bm->bat_type[di->bm->batt_id].nominal_voltage;
-
di->init_capacity = true;
ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);