diff options
Diffstat (limited to 'drivers/powercap/intel_rapl_common.c')
| -rw-r--r-- | drivers/powercap/intel_rapl_common.c | 119 |
1 files changed, 117 insertions, 2 deletions
diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c index b70d6915a6ba..4e646e5e48f6 100644 --- a/drivers/powercap/intel_rapl_common.c +++ b/drivers/powercap/intel_rapl_common.c @@ -75,6 +75,15 @@ #define PSYS_TIME_WINDOW1_MASK (0x7FULL<<19) #define PSYS_TIME_WINDOW2_MASK (0x7FULL<<51) +/* bitmasks for RAPL TPMI, used by primitive access functions */ +#define TPMI_POWER_LIMIT_MASK 0x3FFFF +#define TPMI_POWER_LIMIT_ENABLE BIT_ULL(62) +#define TPMI_TIME_WINDOW_MASK (0x7FULL<<18) +#define TPMI_INFO_SPEC_MASK 0x3FFFF +#define TPMI_INFO_MIN_MASK (0x3FFFFULL << 18) +#define TPMI_INFO_MAX_MASK (0x3FFFFULL << 36) +#define TPMI_INFO_MAX_TIME_WIN_MASK (0x7FULL << 54) + /* Non HW constants */ #define RAPL_PRIMITIVE_DERIVED BIT(1) /* not from raw data */ #define RAPL_PRIMITIVE_DUMMY BIT(2) @@ -119,6 +128,19 @@ static bool is_pl_valid(struct rapl_domain *rd, int pl) static int get_pl_lock_prim(struct rapl_domain *rd, int pl) { + if (rd->rp->priv->type == RAPL_IF_TPMI) { + if (pl == POWER_LIMIT1) + return PL1_LOCK; + if (pl == POWER_LIMIT2) + return PL2_LOCK; + if (pl == POWER_LIMIT4) + return PL4_LOCK; + } + + /* MSR/MMIO Interface doesn't have Lock bit for PL4 */ + if (pl == POWER_LIMIT4) + return -EINVAL; + /* * Power Limit register that supports two power limits has a different * bit position for the Lock bit. @@ -134,7 +156,7 @@ static int get_pl_prim(struct rapl_domain *rd, int pl, enum pl_prims prim) case POWER_LIMIT1: if (prim == PL_ENABLE) return PL1_ENABLE; - if (prim == PL_CLAMP) + if (prim == PL_CLAMP && rd->rp->priv->type != RAPL_IF_TPMI) return PL1_CLAMP; if (prim == PL_LIMIT) return POWER_LIMIT1; @@ -148,7 +170,7 @@ static int get_pl_prim(struct rapl_domain *rd, int pl, enum pl_prims prim) case POWER_LIMIT2: if (prim == PL_ENABLE) return PL2_ENABLE; - if (prim == PL_CLAMP) + if (prim == PL_CLAMP && rd->rp->priv->type != RAPL_IF_TPMI) return PL2_CLAMP; if (prim == PL_LIMIT) return POWER_LIMIT2; @@ -167,6 +189,8 @@ static int get_pl_prim(struct rapl_domain *rd, int pl, enum pl_prims prim) /* PL4 would be around two times PL2, use same prim as PL2. */ if (prim == PL_MAX_POWER) return MAX_POWER; + if (prim == PL_LOCK) + return get_pl_lock_prim(rd, pl); return -EINVAL; default: return -EINVAL; @@ -187,6 +211,7 @@ struct rapl_defaults { bool spr_psys_bits; }; static struct rapl_defaults *defaults_msr; +static const struct rapl_defaults defaults_tpmi; static struct rapl_defaults *get_defaults(struct rapl_package *rp) { @@ -610,6 +635,7 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd, enum unit_type type, return div64_u64(value, scale); } +/* RAPL primitives for MSR and MMIO I/F */ static struct rapl_primitive_info rpi_msr[NR_RAPL_PRIMITIVES] = { /* name, mask, shift, msr index, unit divisor */ [POWER_LIMIT1] = PRIMITIVE_INFO_INIT(POWER_LIMIT1, POWER_LIMIT1_MASK, 0, @@ -667,6 +693,48 @@ static struct rapl_primitive_info rpi_msr[NR_RAPL_PRIMITIVES] = { RAPL_PRIMITIVE_DERIVED), }; +/* RAPL primitives for TPMI I/F */ +static struct rapl_primitive_info rpi_tpmi[NR_RAPL_PRIMITIVES] = { + /* name, mask, shift, msr index, unit divisor */ + [POWER_LIMIT1] = PRIMITIVE_INFO_INIT(POWER_LIMIT1, TPMI_POWER_LIMIT_MASK, 0, + RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), + [POWER_LIMIT2] = PRIMITIVE_INFO_INIT(POWER_LIMIT2, TPMI_POWER_LIMIT_MASK, 0, + RAPL_DOMAIN_REG_PL2, POWER_UNIT, 0), + [POWER_LIMIT4] = PRIMITIVE_INFO_INIT(POWER_LIMIT4, TPMI_POWER_LIMIT_MASK, 0, + RAPL_DOMAIN_REG_PL4, POWER_UNIT, 0), + [ENERGY_COUNTER] = PRIMITIVE_INFO_INIT(ENERGY_COUNTER, ENERGY_STATUS_MASK, 0, + RAPL_DOMAIN_REG_STATUS, ENERGY_UNIT, 0), + [PL1_LOCK] = PRIMITIVE_INFO_INIT(PL1_LOCK, POWER_HIGH_LOCK, 63, + RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), + [PL2_LOCK] = PRIMITIVE_INFO_INIT(PL2_LOCK, POWER_HIGH_LOCK, 63, + RAPL_DOMAIN_REG_PL2, ARBITRARY_UNIT, 0), + [PL4_LOCK] = PRIMITIVE_INFO_INIT(PL4_LOCK, POWER_HIGH_LOCK, 63, + RAPL_DOMAIN_REG_PL4, ARBITRARY_UNIT, 0), + [PL1_ENABLE] = PRIMITIVE_INFO_INIT(PL1_ENABLE, TPMI_POWER_LIMIT_ENABLE, 62, + RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), + [PL2_ENABLE] = PRIMITIVE_INFO_INIT(PL2_ENABLE, TPMI_POWER_LIMIT_ENABLE, 62, + RAPL_DOMAIN_REG_PL2, ARBITRARY_UNIT, 0), + [PL4_ENABLE] = PRIMITIVE_INFO_INIT(PL4_ENABLE, TPMI_POWER_LIMIT_ENABLE, 62, + RAPL_DOMAIN_REG_PL4, ARBITRARY_UNIT, 0), + [TIME_WINDOW1] = PRIMITIVE_INFO_INIT(TIME_WINDOW1, TPMI_TIME_WINDOW_MASK, 18, + RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0), + [TIME_WINDOW2] = PRIMITIVE_INFO_INIT(TIME_WINDOW2, TPMI_TIME_WINDOW_MASK, 18, + RAPL_DOMAIN_REG_PL2, TIME_UNIT, 0), + [THERMAL_SPEC_POWER] = PRIMITIVE_INFO_INIT(THERMAL_SPEC_POWER, TPMI_INFO_SPEC_MASK, 0, + RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0), + [MAX_POWER] = PRIMITIVE_INFO_INIT(MAX_POWER, TPMI_INFO_MAX_MASK, 36, + RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0), + [MIN_POWER] = PRIMITIVE_INFO_INIT(MIN_POWER, TPMI_INFO_MIN_MASK, 18, + RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0), + [MAX_TIME_WINDOW] = PRIMITIVE_INFO_INIT(MAX_TIME_WINDOW, TPMI_INFO_MAX_TIME_WIN_MASK, 54, + RAPL_DOMAIN_REG_INFO, TIME_UNIT, 0), + [THROTTLED_TIME] = PRIMITIVE_INFO_INIT(THROTTLED_TIME, PERF_STATUS_THROTTLE_TIME_MASK, 0, + RAPL_DOMAIN_REG_PERF, TIME_UNIT, 0), + /* non-hardware */ + [AVERAGE_POWER] = PRIMITIVE_INFO_INIT(AVERAGE_POWER, 0, 0, 0, + POWER_UNIT, RAPL_PRIMITIVE_DERIVED), +}; + static struct rapl_primitive_info *get_rpi(struct rapl_package *rp, int prim) { struct rapl_primitive_info *rpi = rp->priv->rpi; @@ -686,6 +754,10 @@ static int rapl_config(struct rapl_package *rp) rp->priv->defaults = (void *)defaults_msr; rp->priv->rpi = (void *)rpi_msr; break; + case RAPL_IF_TPMI: + rp->priv->defaults = (void *)&defaults_tpmi; + rp->priv->rpi = (void *)rpi_tpmi; + break; default: return -EINVAL; } @@ -1046,6 +1118,49 @@ static u64 rapl_compute_time_window_atom(struct rapl_domain *rd, u64 value, return value; } +/* TPMI Unit register has different layout */ +#define TPMI_POWER_UNIT_OFFSET POWER_UNIT_OFFSET +#define TPMI_POWER_UNIT_MASK POWER_UNIT_MASK +#define TPMI_ENERGY_UNIT_OFFSET 0x06 +#define TPMI_ENERGY_UNIT_MASK 0x7C0 +#define TPMI_TIME_UNIT_OFFSET 0x0C +#define TPMI_TIME_UNIT_MASK 0xF000 + +static int rapl_check_unit_tpmi(struct rapl_domain *rd) +{ + struct reg_action ra; + u32 value; + + ra.reg = rd->regs[RAPL_DOMAIN_REG_UNIT]; + ra.mask = ~0; + if (rd->rp->priv->read_raw(get_rid(rd->rp), &ra)) { + pr_err("Failed to read power unit REG 0x%llx on %s:%s, exit.\n", + ra.reg, rd->rp->name, rd->name); + return -ENODEV; + } + + value = (ra.value & TPMI_ENERGY_UNIT_MASK) >> TPMI_ENERGY_UNIT_OFFSET; + rd->energy_unit = ENERGY_UNIT_SCALE * 1000000 / (1 << value); + + value = (ra.value & TPMI_POWER_UNIT_MASK) >> TPMI_POWER_UNIT_OFFSET; + rd->power_unit = 1000000 / (1 << value); + + value = (ra.value & TPMI_TIME_UNIT_MASK) >> TPMI_TIME_UNIT_OFFSET; + rd->time_unit = 1000000 / (1 << value); + + pr_debug("Core CPU %s:%s energy=%dpJ, time=%dus, power=%duW\n", + rd->rp->name, rd->name, rd->energy_unit, rd->time_unit, rd->power_unit); + + return 0; +} + +static const struct rapl_defaults defaults_tpmi = { + .check_unit = rapl_check_unit_tpmi, + /* Reuse existing logic, ignore the PL_CLAMP failures and enable all Power Limits */ + .set_floor_freq = set_floor_freq_default, + .compute_time_window = rapl_compute_time_window_core, +}; + static const struct rapl_defaults rapl_defaults_core = { .floor_freq_reg_addr = 0, .check_unit = rapl_check_unit_core, |