diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/da9063-regulator.c | 12 | ||||
-rw-r--r-- | drivers/regulator/qcom-rpmh-regulator.c | 2 |
2 files changed, 7 insertions, 7 deletions
diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index dfd5ec9f75c9..a0621665a6d2 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -778,9 +778,6 @@ static int da9063_check_xvp_constraints(struct regulator_config *config) const struct notification_limit *uv_l = &constr->under_voltage_limits; const struct notification_limit *ov_l = &constr->over_voltage_limits; - if (!config->init_data) /* No config in DT, pointers will be invalid */ - return 0; - /* make sure that only one severity is used to clarify if unchanged, enabled or disabled */ if ((!!uv_l->prot + !!uv_l->err + !!uv_l->warn) > 1) { dev_err(config->dev, "%s: at most one voltage monitoring severity allowed!\n", @@ -1031,9 +1028,12 @@ static int da9063_regulator_probe(struct platform_device *pdev) config.of_node = da9063_reg_matches[id].of_node; config.regmap = da9063->regmap; - ret = da9063_check_xvp_constraints(&config); - if (ret) - return ret; + /* Checking constraints requires init_data from DT. */ + if (config.init_data) { + ret = da9063_check_xvp_constraints(&config); + if (ret) + return ret; + } regl->rdev = devm_regulator_register(&pdev->dev, ®l->desc, &config); diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index f3b280af0773..cd077b7c4aff 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -1068,7 +1068,7 @@ static const struct rpmh_vreg_init_data pm8550_vreg_data[] = { RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l8-l9"), RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo515, "vdd-l1-l4-l10"), RPMH_VREG("ldo11", "ldo%s11", &pmic5_nldo515, "vdd-l11"), - RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo, "vdd-l12"), + RPMH_VREG("ldo12", "ldo%s12", &pmic5_nldo515, "vdd-l12"), RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l2-l13-l14"), RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo, "vdd-l2-l13-l14"), RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo515, "vdd-l15"), |