summaryrefslogtreecommitdiff
path: root/drivers/scsi/atari_NCR5380.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/atari_NCR5380.c')
-rw-r--r--drivers/scsi/atari_NCR5380.c986
1 files changed, 472 insertions, 514 deletions
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 79e6f045c2a9..6daed6b386d4 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -11,8 +11,6 @@
* drew@colorado.edu
* +1 (303) 666-5836
*
- * DISTRIBUTION RELEASE 6.
- *
* For more information, please consult
*
* NCR 5380 Family
@@ -73,6 +71,9 @@
* 1. Test linked command handling code after Eric is ready with
* the high level code.
*/
+
+/* Adapted for the sun3 by Sam Creasey. */
+
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_transport_spi.h>
@@ -103,27 +104,7 @@
/*
* Design
- * Issues :
- *
- * The other Linux SCSI drivers were written when Linux was Intel PC-only,
- * and specifically for each board rather than each chip. This makes their
- * adaptation to platforms like the Mac (Some of which use NCR5380's)
- * more difficult than it has to be.
*
- * Also, many of the SCSI drivers were written before the command queuing
- * routines were implemented, meaning their implementations of queued
- * commands were hacked on rather than designed in from the start.
- *
- * When I designed the Linux SCSI drivers I figured that
- * while having two different SCSI boards in a system might be useful
- * for debugging things, two of the same type wouldn't be used.
- * Well, I was wrong and a number of users have mailed me about running
- * multiple high-performance SCSI boards in a server.
- *
- * Finally, when I get questions from users, I have no idea what
- * revision of my driver they are running.
- *
- * This driver attempts to address these problems :
* This is a generic 5380 driver. To use it on a different platform,
* one simply writes appropriate system specific macros (ie, data
* transfer - some PC's will use the I/O bus, 68K's must use
@@ -138,17 +119,6 @@
* allowing multiple commands to propagate all the way to a SCSI-II device
* while a command is already executing.
*
- * To solve the multiple-boards-in-the-same-system problem,
- * there is a separate instance structure for each instance
- * of a 5380 in the system. So, multiple NCR5380 drivers will
- * be able to coexist with appropriate changes to the high level
- * SCSI code.
- *
- * A NCR5380_PUBLIC_REVISION macro is provided, with the release
- * number (updated for each public release) printed by the
- * NCR5380_print_options command, which should be called from the
- * wrapper detect function, so that I know what release of the driver
- * users are using.
*
* Issues specific to the NCR5380 :
*
@@ -173,19 +143,17 @@
* Architecture :
*
* At the heart of the design is a coroutine, NCR5380_main,
- * which is started when not running by the interrupt handler,
- * timer, and queue command function. It attempts to establish
- * I_T_L or I_T_L_Q nexuses by removing the commands from the
- * issue queue and calling NCR5380_select() if a nexus
- * is not established.
+ * which is started from a workqueue for each NCR5380 host in the
+ * system. It attempts to establish I_T_L or I_T_L_Q nexuses by
+ * removing the commands from the issue queue and calling
+ * NCR5380_select() if a nexus is not established.
*
* Once a nexus is established, the NCR5380_information_transfer()
* phase goes through the various phases as instructed by the target.
* if the target goes into MSG IN and sends a DISCONNECT message,
* the command structure is placed into the per instance disconnected
- * queue, and NCR5380_main tries to find more work. If USLEEP
- * was defined, and the target is idle for too long, the system
- * will try to sleep.
+ * queue, and NCR5380_main tries to find more work. If the target is
+ * idle for too long, the system will try to sleep.
*
* If a command has disconnected, eventually an interrupt will trigger,
* calling NCR5380_intr() which will in turn call NCR5380_reselect
@@ -211,6 +179,9 @@
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
* for commands that return with a CHECK CONDITION status.
*
+ * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
+ * transceivers.
+ *
* LINKED - if defined, linked commands are supported.
*
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
@@ -223,6 +194,9 @@
*
* NCR5380_write(register, value) - write to the specific register
*
+ * NCR5380_implementation_fields - additional fields needed for this
+ * specific implementation of the NCR5380
+ *
* Either real DMA *or* pseudo DMA may be implemented
* REAL functions :
* NCR5380_REAL_DMA should be defined if real DMA is to be used.
@@ -241,40 +215,21 @@
* NCR5380_pwrite(instance, src, count)
* NCR5380_pread(instance, dst, count);
*
- * If nothing specific to this implementation needs doing (ie, with external
- * hardware), you must also define
- *
- * NCR5380_queue_command
- * NCR5380_reset
- * NCR5380_abort
- * NCR5380_proc_info
- *
- * to be the global entry points into the specific driver, ie
- * #define NCR5380_queue_command t128_queue_command.
- *
- * If this is not done, the routines will be defined as static functions
- * with the NCR5380* names and the user must provide a globally
- * accessible wrapper function.
- *
* The generic driver is initialized by calling NCR5380_init(instance),
* after setting the appropriate host specific fields and ID. If the
* driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
- * possible) function may be used. Before the specific driver initialization
- * code finishes, NCR5380_print_options should be called.
+ * possible) function may be used.
*/
-static struct Scsi_Host *first_instance = NULL;
-static struct scsi_host_template *the_template = NULL;
-
/* Macros ease life... :-) */
#define SETUP_HOSTDATA(in) \
struct NCR5380_hostdata *hostdata = \
(struct NCR5380_hostdata *)(in)->hostdata
#define HOSTDATA(in) ((struct NCR5380_hostdata *)(in)->hostdata)
-#define NEXT(cmd) ((Scsi_Cmnd *)(cmd)->host_scribble)
+#define NEXT(cmd) ((struct scsi_cmnd *)(cmd)->host_scribble)
#define SET_NEXT(cmd,next) ((cmd)->host_scribble = (void *)(next))
-#define NEXTADDR(cmd) ((Scsi_Cmnd **)&(cmd)->host_scribble)
+#define NEXTADDR(cmd) ((struct scsi_cmnd **)&(cmd)->host_scribble)
#define HOSTNO instance->host_no
#define H_NO(cmd) (cmd)->device->host->host_no
@@ -316,30 +271,17 @@ static struct scsi_host_template *the_template = NULL;
* important: the tag bit must be cleared before 'nr_allocated' is decreased.
*/
-/* -1 for TAG_NONE is not possible with unsigned char cmd->tag */
-#undef TAG_NONE
-#define TAG_NONE 0xff
-
-typedef struct {
- DECLARE_BITMAP(allocated, MAX_TAGS);
- int nr_allocated;
- int queue_size;
-} TAG_ALLOC;
-
-static TAG_ALLOC TagAlloc[8][8]; /* 8 targets and 8 LUNs */
-
-
-static void __init init_tags(void)
+static void __init init_tags(struct NCR5380_hostdata *hostdata)
{
int target, lun;
- TAG_ALLOC *ta;
+ struct tag_alloc *ta;
- if (!setup_use_tagged_queuing)
+ if (!(hostdata->flags & FLAG_TAGGED_QUEUING))
return;
for (target = 0; target < 8; ++target) {
for (lun = 0; lun < 8; ++lun) {
- ta = &TagAlloc[target][lun];
+ ta = &hostdata->TagAlloc[target][lun];
bitmap_zero(ta->allocated, MAX_TAGS);
ta->nr_allocated = 0;
/* At the beginning, assume the maximum queue size we could
@@ -359,7 +301,7 @@ static void __init init_tags(void)
* conditions.
*/
-static int is_lun_busy(Scsi_Cmnd *cmd, int should_be_tagged)
+static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged)
{
u8 lun = cmd->device->lun;
SETUP_HOSTDATA(cmd->device->host);
@@ -367,10 +309,11 @@ static int is_lun_busy(Scsi_Cmnd *cmd, int should_be_tagged)
if (hostdata->busy[cmd->device->id] & (1 << lun))
return 1;
if (!should_be_tagged ||
- !setup_use_tagged_queuing || !cmd->device->tagged_supported)
+ !(hostdata->flags & FLAG_TAGGED_QUEUING) ||
+ !cmd->device->tagged_supported)
return 0;
- if (TagAlloc[cmd->device->id][lun].nr_allocated >=
- TagAlloc[cmd->device->id][lun].queue_size) {
+ if (hostdata->TagAlloc[scmd_id(cmd)][lun].nr_allocated >=
+ hostdata->TagAlloc[scmd_id(cmd)][lun].queue_size) {
dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d: no free tags\n",
H_NO(cmd), cmd->device->id, lun);
return 1;
@@ -384,7 +327,7 @@ static int is_lun_busy(Scsi_Cmnd *cmd, int should_be_tagged)
* untagged.
*/
-static void cmd_get_tag(Scsi_Cmnd *cmd, int should_be_tagged)
+static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged)
{
u8 lun = cmd->device->lun;
SETUP_HOSTDATA(cmd->device->host);
@@ -393,13 +336,14 @@ static void cmd_get_tag(Scsi_Cmnd *cmd, int should_be_tagged)
* an untagged command.
*/
if (!should_be_tagged ||
- !setup_use_tagged_queuing || !cmd->device->tagged_supported) {
+ !(hostdata->flags & FLAG_TAGGED_QUEUING) ||
+ !cmd->device->tagged_supported) {
cmd->tag = TAG_NONE;
hostdata->busy[cmd->device->id] |= (1 << lun);
dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d now allocated by untagged "
"command\n", H_NO(cmd), cmd->device->id, lun);
} else {
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][lun];
+ struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
cmd->tag = find_first_zero_bit(ta->allocated, MAX_TAGS);
set_bit(cmd->tag, ta->allocated);
@@ -416,7 +360,7 @@ static void cmd_get_tag(Scsi_Cmnd *cmd, int should_be_tagged)
* unlock the LUN.
*/
-static void cmd_free_tag(Scsi_Cmnd *cmd)
+static void cmd_free_tag(struct scsi_cmnd *cmd)
{
u8 lun = cmd->device->lun;
SETUP_HOSTDATA(cmd->device->host);
@@ -429,7 +373,7 @@ static void cmd_free_tag(Scsi_Cmnd *cmd)
printk(KERN_NOTICE "scsi%d: trying to free bad tag %d!\n",
H_NO(cmd), cmd->tag);
} else {
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][lun];
+ struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
clear_bit(cmd->tag, ta->allocated);
ta->nr_allocated--;
dprintk(NDEBUG_TAGS, "scsi%d: freed tag %d for target %d lun %d\n",
@@ -438,17 +382,17 @@ static void cmd_free_tag(Scsi_Cmnd *cmd)
}
-static void free_all_tags(void)
+static void free_all_tags(struct NCR5380_hostdata *hostdata)
{
int target, lun;
- TAG_ALLOC *ta;
+ struct tag_alloc *ta;
- if (!setup_use_tagged_queuing)
+ if (!(hostdata->flags & FLAG_TAGGED_QUEUING))
return;
for (target = 0; target < 8; ++target) {
for (lun = 0; lun < 8; ++lun) {
- ta = &TagAlloc[target][lun];
+ ta = &hostdata->TagAlloc[target][lun];
bitmap_zero(ta->allocated, MAX_TAGS);
ta->nr_allocated = 0;
}
@@ -459,19 +403,20 @@ static void free_all_tags(void)
/*
- * Function: void merge_contiguous_buffers( Scsi_Cmnd *cmd )
+ * Function: void merge_contiguous_buffers( struct scsi_cmnd *cmd )
*
* Purpose: Try to merge several scatter-gather requests into one DMA
* transfer. This is possible if the scatter buffers lie on
* physical contiguous addresses.
*
- * Parameters: Scsi_Cmnd *cmd
+ * Parameters: struct scsi_cmnd *cmd
* The command to work on. The first scatter buffer's data are
* assumed to be already transferred into ptr/this_residual.
*/
-static void merge_contiguous_buffers(Scsi_Cmnd *cmd)
+static void merge_contiguous_buffers(struct scsi_cmnd *cmd)
{
+#if !defined(CONFIG_SUN3)
unsigned long endaddr;
#if (NDEBUG & NDEBUG_MERGING)
unsigned long oldlen = cmd->SCp.this_residual;
@@ -496,18 +441,17 @@ static void merge_contiguous_buffers(Scsi_Cmnd *cmd)
dprintk(NDEBUG_MERGING, "merged %d buffers from %p, new length %08x\n",
cnt, cmd->SCp.ptr, cmd->SCp.this_residual);
#endif
+#endif /* !defined(CONFIG_SUN3) */
}
-/*
- * Function : void initialize_SCp(Scsi_Cmnd *cmd)
+/**
+ * initialize_SCp - init the scsi pointer field
+ * @cmd: command block to set up
*
- * Purpose : initialize the saved data pointers for cmd to point to the
- * start of the buffer.
- *
- * Inputs : cmd - Scsi_Cmnd structure to have pointers reset.
+ * Set up the internal fields in the SCSI command.
*/
-static inline void initialize_SCp(Scsi_Cmnd *cmd)
+static inline void initialize_SCp(struct scsi_cmnd *cmd)
{
/*
* Initialize the Scsi Pointer field so that all of the commands in the
@@ -557,12 +501,11 @@ static struct {
{0, NULL}
};
-/*
- * Function : void NCR5380_print(struct Scsi_Host *instance)
+/**
+ * NCR5380_print - print scsi bus signals
+ * @instance: adapter state to dump
*
- * Purpose : print the SCSI bus signals for debugging purposes
- *
- * Input : instance - which NCR5380
+ * Print the SCSI bus signals for debugging purposes
*/
static void NCR5380_print(struct Scsi_Host *instance)
@@ -605,12 +548,13 @@ static struct {
{PHASE_UNKNOWN, "UNKNOWN"}
};
-/*
- * Function : void NCR5380_print_phase(struct Scsi_Host *instance)
+/**
+ * NCR5380_print_phase - show SCSI phase
+ * @instance: adapter to dump
*
- * Purpose : print the current SCSI phase for debugging purposes
+ * Print the current SCSI phase for debugging purposes
*
- * Input : instance - which NCR5380
+ * Locks: none
*/
static void NCR5380_print_phase(struct Scsi_Host *instance)
@@ -648,71 +592,75 @@ static void NCR5380_print_phase(struct Scsi_Host *instance)
#include <linux/workqueue.h>
#include <linux/interrupt.h>
-static volatile int main_running;
-static DECLARE_WORK(NCR5380_tqueue, NCR5380_main);
-
-static inline void queue_main(void)
+static inline void queue_main(struct NCR5380_hostdata *hostdata)
{
- if (!main_running) {
+ if (!hostdata->main_running) {
/* If in interrupt and NCR5380_main() not already running,
queue it on the 'immediate' task queue, to be processed
immediately after the current interrupt processing has
finished. */
- schedule_work(&NCR5380_tqueue);
+ schedule_work(&hostdata->main_task);
}
/* else: nothing to do: the running NCR5380_main() will pick up
any newly queued command. */
}
-
-static inline void NCR5380_all_init(void)
-{
- static int done = 0;
- if (!done) {
- dprintk(NDEBUG_INIT, "scsi : NCR5380_all_init()\n");
- done = 1;
- }
-}
-
-
-/*
- * Function : void NCR58380_print_options (struct Scsi_Host *instance)
+/**
+ * NCR58380_info - report driver and host information
+ * @instance: relevant scsi host instance
*
- * Purpose : called by probe code indicating the NCR5380 driver
- * options that were selected.
+ * For use as the host template info() handler.
*
- * Inputs : instance, pointer to this instance. Unused.
+ * Locks: none
*/
-static void __init NCR5380_print_options(struct Scsi_Host *instance)
+static const char *NCR5380_info(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ return hostdata->info;
+}
+
+static void prepare_info(struct Scsi_Host *instance)
{
- printk(" generic options"
-#ifdef AUTOSENSE
- " AUTOSENSE"
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ snprintf(hostdata->info, sizeof(hostdata->info),
+ "%s, io_port 0x%lx, n_io_port %d, "
+ "base 0x%lx, irq %d, "
+ "can_queue %d, cmd_per_lun %d, "
+ "sg_tablesize %d, this_id %d, "
+ "flags { %s}, "
+ "options { %s} ",
+ instance->hostt->name, instance->io_port, instance->n_io_port,
+ instance->base, instance->irq,
+ instance->can_queue, instance->cmd_per_lun,
+ instance->sg_tablesize, instance->this_id,
+ hostdata->flags & FLAG_TAGGED_QUEUING ? "TAGGED_QUEUING " : "",
+#ifdef DIFFERENTIAL
+ "DIFFERENTIAL "
#endif
#ifdef REAL_DMA
- " REAL DMA"
+ "REAL_DMA "
#endif
#ifdef PARITY
- " PARITY"
+ "PARITY "
#endif
#ifdef SUPPORT_TAGS
- " SCSI-2 TAGGED QUEUING"
+ "SUPPORT_TAGS "
#endif
- );
- printk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
+ "");
}
-/*
- * Function : void NCR5380_print_status (struct Scsi_Host *instance)
+/**
+ * NCR5380_print_status - dump controller info
+ * @instance: controller to dump
*
- * Purpose : print commands in the various queues, called from
- * NCR5380_abort and NCR5380_debug to aid debugging.
- *
- * Inputs : instance, pointer to this instance.
+ * Print commands in the various queues, called from NCR5380_abort
+ * to aid debugging.
*/
-static void lprint_Scsi_Cmnd(Scsi_Cmnd *cmd)
+static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd)
{
int i, s;
unsigned char *command;
@@ -729,7 +677,7 @@ static void lprint_Scsi_Cmnd(Scsi_Cmnd *cmd)
static void NCR5380_print_status(struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata;
- Scsi_Cmnd *ptr;
+ struct scsi_cmnd *ptr;
unsigned long flags;
NCR5380_dprint(NDEBUG_ANY, instance);
@@ -737,20 +685,19 @@ static void NCR5380_print_status(struct Scsi_Host *instance)
hostdata = (struct NCR5380_hostdata *)instance->hostdata;
- printk("\nNCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE);
local_irq_save(flags);
printk("NCR5380: coroutine is%s running.\n",
- main_running ? "" : "n't");
+ hostdata->main_running ? "" : "n't");
if (!hostdata->connected)
printk("scsi%d: no currently connected command\n", HOSTNO);
else
- lprint_Scsi_Cmnd((Scsi_Cmnd *) hostdata->connected);
+ lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected);
printk("scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
+ for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
lprint_Scsi_Cmnd(ptr);
printk("scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr;
+ for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
ptr = NEXT(ptr))
lprint_Scsi_Cmnd(ptr);
@@ -758,7 +705,7 @@ static void NCR5380_print_status(struct Scsi_Host *instance)
printk("\n");
}
-static void show_Scsi_Cmnd(Scsi_Cmnd *cmd, struct seq_file *m)
+static void show_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
{
int i, s;
unsigned char *command;
@@ -772,28 +719,28 @@ static void show_Scsi_Cmnd(Scsi_Cmnd *cmd, struct seq_file *m)
seq_printf(m, "\n");
}
-static int NCR5380_show_info(struct seq_file *m, struct Scsi_Host *instance)
+static int __maybe_unused NCR5380_show_info(struct seq_file *m,
+ struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata;
- Scsi_Cmnd *ptr;
+ struct scsi_cmnd *ptr;
unsigned long flags;
hostdata = (struct NCR5380_hostdata *)instance->hostdata;
- seq_printf(m, "NCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE);
local_irq_save(flags);
seq_printf(m, "NCR5380: coroutine is%s running.\n",
- main_running ? "" : "n't");
+ hostdata->main_running ? "" : "n't");
if (!hostdata->connected)
seq_printf(m, "scsi%d: no currently connected command\n", HOSTNO);
else
- show_Scsi_Cmnd((Scsi_Cmnd *) hostdata->connected, m);
+ show_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
seq_printf(m, "scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
+ for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
show_Scsi_Cmnd(ptr, m);
seq_printf(m, "scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr;
+ for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
ptr = NEXT(ptr))
show_Scsi_Cmnd(ptr, m);
@@ -801,16 +748,18 @@ static int NCR5380_show_info(struct seq_file *m, struct Scsi_Host *instance)
return 0;
}
-/*
- * Function : void NCR5380_init (struct Scsi_Host *instance)
+/**
+ * NCR5380_init - initialise an NCR5380
+ * @instance: adapter to configure
+ * @flags: control flags
*
- * Purpose : initializes *instance and corresponding 5380 chip.
- *
- * Inputs : instance - instantiation of the 5380 driver.
+ * Initializes *instance and corresponding 5380 chip,
+ * with flags OR'd into the initial flags value.
*
* Notes : I assume that the host, hostno, and id bits have been
- * set correctly. I don't care about the irq and other fields.
+ * set correctly. I don't care about the irq and other fields.
*
+ * Returns 0 for success
*/
static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
@@ -818,8 +767,7 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
int i;
SETUP_HOSTDATA(instance);
- NCR5380_all_init();
-
+ hostdata->host = instance;
hostdata->aborted = 0;
hostdata->id_mask = 1 << instance->this_id;
hostdata->id_higher_mask = 0;
@@ -829,7 +777,7 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
for (i = 0; i < 8; ++i)
hostdata->busy[i] = 0;
#ifdef SUPPORT_TAGS
- init_tags();
+ init_tags(hostdata);
#endif
#if defined (REAL_DMA)
hostdata->dma_len = 0;
@@ -838,19 +786,11 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
hostdata->connected = NULL;
hostdata->issue_queue = NULL;
hostdata->disconnected_queue = NULL;
- hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT;
+ hostdata->flags = flags;
- if (!the_template) {
- the_template = instance->hostt;
- first_instance = instance;
- }
+ INIT_WORK(&hostdata->main_task, NCR5380_main);
-#ifndef AUTOSENSE
- if ((instance->cmd_per_lun > 1) || (instance->can_queue > 1))
- printk("scsi%d: WARNING : support for multiple outstanding commands enabled\n"
- " without AUTOSENSE option, contingent allegiance conditions may\n"
- " be incorrectly cleared.\n", HOSTNO);
-#endif /* def AUTOSENSE */
+ prepare_info(instance);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
@@ -860,33 +800,35 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
return 0;
}
+/**
+ * NCR5380_exit - remove an NCR5380
+ * @instance: adapter to remove
+ *
+ * Assumes that no more work can be queued (e.g. by NCR5380_intr).
+ */
+
static void NCR5380_exit(struct Scsi_Host *instance)
{
- /* Empty, as we didn't schedule any delayed work */
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ cancel_work_sync(&hostdata->main_task);
}
-/*
- * Function : int NCR5380_queue_command (Scsi_Cmnd *cmd,
- * void (*done)(Scsi_Cmnd *))
- *
- * Purpose : enqueues a SCSI command
- *
- * Inputs : cmd - SCSI command, done - function called on completion, with
- * a pointer to the command descriptor.
- *
- * Returns : 0
- *
- * Side effects :
- * cmd is added to the per instance issue_queue, with minor
- * twiddling done to the host specific fields of cmd. If the
- * main coroutine is not running, it is restarted.
+/**
+ * NCR5380_queue_command - queue a command
+ * @instance: the relevant SCSI adapter
+ * @cmd: SCSI command
*
+ * cmd is added to the per instance issue_queue, with minor
+ * twiddling done to the host specific fields of cmd. If the
+ * main coroutine is not running, it is restarted.
*/
-static int NCR5380_queue_command_lck(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
+static int NCR5380_queue_command(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
{
- SETUP_HOSTDATA(cmd->device->host);
- Scsi_Cmnd *tmp;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct scsi_cmnd *tmp;
unsigned long flags;
#if (NDEBUG & NDEBUG_NO_WRITE)
@@ -896,47 +838,17 @@ static int NCR5380_queue_command_lck(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
printk(KERN_NOTICE "scsi%d: WRITE attempted with NO_WRITE debugging flag set\n",
H_NO(cmd));
cmd->result = (DID_ERROR << 16);
- done(cmd);
+ cmd->scsi_done(cmd);
return 0;
}
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
-#ifdef NCR5380_STATS
-# if 0
- if (!hostdata->connected && !hostdata->issue_queue &&
- !hostdata->disconnected_queue) {
- hostdata->timebase = jiffies;
- }
-# endif
-# ifdef NCR5380_STAT_LIMIT
- if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT)
-# endif
- switch (cmd->cmnd[0]) {
- case WRITE:
- case WRITE_6:
- case WRITE_10:
- hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase);
- hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);
- hostdata->pendingw++;
- break;
- case READ:
- case READ_6:
- case READ_10:
- hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase);
- hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);
- hostdata->pendingr++;
- break;
- }
-#endif
-
/*
* We use the host_scribble field as a pointer to the next command
* in a queue
*/
SET_NEXT(cmd, NULL);
- cmd->scsi_done = done;
-
cmd->result = 0;
/*
@@ -946,7 +858,6 @@ static int NCR5380_queue_command_lck(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
* sense data is only guaranteed to be valid while the condition exists.
*/
- local_irq_save(flags);
/* ++guenther: now that the issue queue is being set up, we can lock ST-DMA.
* Otherwise a running NCR5380_main may steal the lock.
* Lock before actually inserting due to fairness reasons explained in
@@ -959,17 +870,24 @@ static int NCR5380_queue_command_lck(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
* because also a timer int can trigger an abort or reset, which would
* alter queues and touch the lock.
*/
- if (!IS_A_TT()) {
- /* perhaps stop command timer here */
- falcon_get_lock();
- /* perhaps restart command timer here */
- }
+ if (!NCR5380_acquire_dma_irq(instance))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ local_irq_save(flags);
+
+ /*
+ * Insert the cmd into the issue queue. Note that REQUEST SENSE
+ * commands are added to the head of the queue since any command will
+ * clear the contingent allegiance condition that exists and the
+ * sense data is only guaranteed to be valid while the condition exists.
+ */
+
if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
LIST(cmd, hostdata->issue_queue);
SET_NEXT(cmd, hostdata->issue_queue);
hostdata->issue_queue = cmd;
} else {
- for (tmp = (Scsi_Cmnd *)hostdata->issue_queue;
+ for (tmp = (struct scsi_cmnd *)hostdata->issue_queue;
NEXT(tmp); tmp = NEXT(tmp))
;
LIST(cmd, tmp);
@@ -987,32 +905,42 @@ static int NCR5380_queue_command_lck(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
* If we're not in an interrupt, we can call NCR5380_main()
* unconditionally, because it cannot be already running.
*/
- if (in_interrupt() || ((flags >> 8) & 7) >= 6)
- queue_main();
+ if (in_interrupt() || irqs_disabled())
+ queue_main(hostdata);
else
- NCR5380_main(NULL);
+ NCR5380_main(&hostdata->main_task);
return 0;
}
-static DEF_SCSI_QCMD(NCR5380_queue_command)
+static inline void maybe_release_dma_irq(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ /* Caller does the locking needed to set & test these data atomically */
+ if (!hostdata->disconnected_queue &&
+ !hostdata->issue_queue &&
+ !hostdata->connected &&
+ !hostdata->retain_dma_intr)
+ NCR5380_release_dma_irq(instance);
+}
-/*
- * Function : NCR5380_main (void)
+/**
+ * NCR5380_main - NCR state machines
*
- * Purpose : NCR5380_main is a coroutine that runs as long as more work can
- * be done on the NCR5380 host adapters in a system. Both
- * NCR5380_queue_command() and NCR5380_intr() will try to start it
- * in case it is not running.
+ * NCR5380_main is a coroutine that runs as long as more work can
+ * be done on the NCR5380 host adapters in a system. Both
+ * NCR5380_queue_command() and NCR5380_intr() will try to start it
+ * in case it is not running.
*
- * NOTE : NCR5380_main exits with interrupts *disabled*, the caller should
- * reenable them. This prevents reentrancy and kernel stack overflow.
+ * Locks: called as its own thread with no locks held.
*/
static void NCR5380_main(struct work_struct *work)
{
- Scsi_Cmnd *tmp, *prev;
- struct Scsi_Host *instance = first_instance;
- struct NCR5380_hostdata *hostdata = HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata =
+ container_of(work, struct NCR5380_hostdata, main_task);
+ struct Scsi_Host *instance = hostdata->host;
+ struct scsi_cmnd *tmp, *prev;
int done;
unsigned long flags;
@@ -1037,9 +965,9 @@ static void NCR5380_main(struct work_struct *work)
'main_running' is set here, and queues/executes main via the
task queue, it doesn't do any harm, just this instance of main
won't find any work left to do. */
- if (main_running)
+ if (hostdata->main_running)
return;
- main_running = 1;
+ hostdata->main_running = 1;
local_save_flags(flags);
do {
@@ -1053,7 +981,7 @@ static void NCR5380_main(struct work_struct *work)
* for a target that's not busy.
*/
#if (NDEBUG & NDEBUG_LISTS)
- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue, prev = NULL;
+ for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL;
tmp && (tmp != prev); prev = tmp, tmp = NEXT(tmp))
;
/*printk("%p ", tmp);*/
@@ -1061,16 +989,14 @@ static void NCR5380_main(struct work_struct *work)
printk(" LOOP\n");
/* else printk("\n"); */
#endif
- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue,
+ for (tmp = (struct scsi_cmnd *) hostdata->issue_queue,
prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp)) {
u8 lun = tmp->device->lun;
-#if (NDEBUG & NDEBUG_LISTS)
- if (prev != tmp)
- printk("MAIN tmp=%p target=%d busy=%d lun=%llu\n",
- tmp, tmp->device->id, hostdata->busy[tmp->device->id],
- lun);
-#endif
+ dprintk(NDEBUG_LISTS,
+ "MAIN tmp=%p target=%d busy=%d lun=%d\n",
+ tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)],
+ lun);
/* When we find one, remove it from the issue queue. */
/* ++guenther: possible race with Falcon locking */
if (
@@ -1090,7 +1016,7 @@ static void NCR5380_main(struct work_struct *work)
hostdata->issue_queue = NEXT(tmp);
}
SET_NEXT(tmp, NULL);
- falcon_dont_release++;
+ hostdata->retain_dma_intr++;
/* reenable interrupts after finding one */
local_irq_restore(flags);
@@ -1117,12 +1043,12 @@ static void NCR5380_main(struct work_struct *work)
#ifdef SUPPORT_TAGS
cmd_get_tag(tmp, tmp->cmnd[0] != REQUEST_SENSE);
#endif
- if (!NCR5380_select(instance, tmp,
- (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE :
- TAG_NEXT)) {
- falcon_dont_release--;
+ if (!NCR5380_select(instance, tmp)) {
+ local_irq_disable();
+ hostdata->retain_dma_intr--;
/* release if target did not response! */
- falcon_release_lock_if_possible(hostdata);
+ maybe_release_dma_irq(instance);
+ local_irq_restore(flags);
break;
} else {
local_irq_disable();
@@ -1132,7 +1058,7 @@ static void NCR5380_main(struct work_struct *work)
#ifdef SUPPORT_TAGS
cmd_free_tag(tmp);
#endif
- falcon_dont_release--;
+ hostdata->retain_dma_intr--;
local_irq_restore(flags);
dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, "
"returned to issue_queue\n", HOSTNO);
@@ -1160,7 +1086,7 @@ static void NCR5380_main(struct work_struct *work)
/* Better allow ints _after_ 'main_running' has been cleared, else
an interrupt could believe we'll pick up the work it left for
us, but we won't see it anymore here... */
- main_running = 0;
+ hostdata->main_running = 0;
local_irq_restore(flags);
}
@@ -1179,9 +1105,11 @@ static void NCR5380_main(struct work_struct *work)
static void NCR5380_dma_complete(struct Scsi_Host *instance)
{
SETUP_HOSTDATA(instance);
- int transfered, saved_data = 0, overrun = 0, cnt, toPIO;
- unsigned char **data, p;
+ int transferred;
+ unsigned char **data;
volatile int *count;
+ int saved_data = 0, overrun = 0;
+ unsigned char p;
if (!hostdata->connected) {
printk(KERN_WARNING "scsi%d: received end of DMA interrupt with "
@@ -1189,7 +1117,7 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
return;
}
- if (atari_read_overruns) {
+ if (hostdata->read_overruns) {
p = hostdata->connected->SCp.phase;
if (p & SR_IO) {
udelay(10);
@@ -1207,21 +1135,41 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
HOSTNO, NCR5380_read(BUS_AND_STATUS_REG),
NCR5380_read(STATUS_REG));
+#if defined(CONFIG_SUN3)
+ if ((sun3scsi_dma_finish(rq_data_dir(hostdata->connected->request)))) {
+ pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n",
+ instance->host_no);
+ BUG();
+ }
+
+ /* make sure we're not stuck in a data phase */
+ if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) ==
+ (BASR_PHASE_MATCH | BASR_ACK)) {
+ pr_err("scsi%d: BASR %02x\n", instance->host_no,
+ NCR5380_read(BUS_AND_STATUS_REG));
+ pr_err("scsi%d: bus stuck in data phase -- probably a single byte overrun!\n",
+ instance->host_no);
+ BUG();
+ }
+#endif
+
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- transfered = hostdata->dma_len - NCR5380_dma_residual(instance);
+ transferred = hostdata->dma_len - NCR5380_dma_residual(instance);
hostdata->dma_len = 0;
data = (unsigned char **)&hostdata->connected->SCp.ptr;
count = &hostdata->connected->SCp.this_residual;
- *data += transfered;
- *count -= transfered;
+ *data += transferred;
+ *count -= transferred;
+
+ if (hostdata->read_overruns) {
+ int cnt, toPIO;
- if (atari_read_overruns) {
if ((NCR5380_read(STATUS_REG) & PHASE_MASK) == p && (p & SR_IO)) {
- cnt = toPIO = atari_read_overruns;
+ cnt = toPIO = hostdata->read_overruns;
if (overrun) {
dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n");
*(*data)++ = saved_data;
@@ -1238,20 +1186,19 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
#endif /* REAL_DMA */
-/*
- * Function : void NCR5380_intr (int irq)
- *
- * Purpose : handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
- * from the disconnected queue, and restarting NCR5380_main()
- * as required.
- *
- * Inputs : int irq, irq that caused this interrupt.
+/**
+ * NCR5380_intr - generic NCR5380 irq handler
+ * @irq: interrupt number
+ * @dev_id: device info
*
+ * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
+ * from the disconnected queue, and restarting NCR5380_main()
+ * as required.
*/
static irqreturn_t NCR5380_intr(int irq, void *dev_id)
{
- struct Scsi_Host *instance = first_instance;
+ struct Scsi_Host *instance = dev_id;
int done = 1, handled = 0;
unsigned char basr;
@@ -1265,7 +1212,6 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
NCR5380_dprint(NDEBUG_INTR, instance);
if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
done = 0;
- ENABLE_IRQ();
dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO);
NCR5380_reselect(instance);
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
@@ -1295,17 +1241,19 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
NCR5380_dma_complete( instance );
done = 0;
- ENABLE_IRQ();
} else
#endif /* REAL_DMA */
{
/* MS: Ignore unknown phase mismatch interrupts (caused by EOP interrupt) */
if (basr & BASR_PHASE_MATCH)
- printk(KERN_NOTICE "scsi%d: unknown interrupt, "
+ dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt, "
"BASR 0x%x, MR 0x%x, SR 0x%x\n",
HOSTNO, basr, NCR5380_read(MODE_REG),
NCR5380_read(STATUS_REG));
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_DMA_ENABLE;
+#endif
}
} /* if !(SELECTION || PARITY) */
handled = 1;
@@ -1314,53 +1262,29 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
"BASR 0x%X, MR 0x%X, SR 0x%x\n", HOSTNO, basr,
NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG));
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_DMA_ENABLE;
+#endif
}
if (!done) {
dprintk(NDEBUG_INTR, "scsi%d: in int routine, calling main\n", HOSTNO);
/* Put a call to NCR5380_main() on the queue... */
- queue_main();
+ queue_main(shost_priv(instance));
}
return IRQ_RETVAL(handled);
}
-#ifdef NCR5380_STATS
-static void collect_stats(struct NCR5380_hostdata* hostdata, Scsi_Cmnd *cmd)
-{
-# ifdef NCR5380_STAT_LIMIT
- if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT)
-# endif
- switch (cmd->cmnd[0]) {
- case WRITE:
- case WRITE_6:
- case WRITE_10:
- hostdata->time_write[cmd->device->id] += (jiffies - hostdata->timebase);
- /*hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);*/
- hostdata->pendingw--;
- break;
- case READ:
- case READ_6:
- case READ_10:
- hostdata->time_read[cmd->device->id] += (jiffies - hostdata->timebase);
- /*hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);*/
- hostdata->pendingr--;
- break;
- }
-}
-#endif
-
/*
- * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd,
- * int tag);
+ * Function : int NCR5380_select(struct Scsi_Host *instance,
+ * struct scsi_cmnd *cmd)
*
* Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
* including ARBITRATION, SELECTION, and initial message out for
* IDENTIFY and queue messages.
*
* Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute, tag - set to TAG_NEXT for
- * new tag, TAG_NONE for untagged queueing, otherwise set to the tag for
- * the command that is presently connected.
+ * target lives, cmd - SCSI command to execute.
*
* Returns : -1 if selection could not execute for some reason,
* 0 if selection succeeded or failed because the target
@@ -1380,7 +1304,7 @@ static void collect_stats(struct NCR5380_hostdata* hostdata, Scsi_Cmnd *cmd)
* cmd->result host byte set to DID_BAD_TARGET.
*/
-static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag)
+static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
{
SETUP_HOSTDATA(instance);
unsigned char tmp[3], phase;
@@ -1562,7 +1486,7 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag)
* selection.
*/
- timeout = jiffies + 25;
+ timeout = jiffies + (250 * HZ / 1000);
/*
* XXX very interesting - we're seeing a bounce where the BSY we
@@ -1616,9 +1540,6 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag)
return -1;
}
cmd->result = DID_BAD_TARGET << 16;
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
#endif
@@ -1676,6 +1597,9 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag)
#ifndef SUPPORT_TAGS
hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
#endif
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_INTR;
+#endif
initialize_SCp(cmd);
@@ -1826,7 +1750,7 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance,
* Returns : 0 on success, -1 on failure.
*/
-static int do_abort(struct Scsi_Host *host)
+static int do_abort(struct Scsi_Host *instance)
{
unsigned char tmp, *msgptr, phase;
int len;
@@ -1861,7 +1785,7 @@ static int do_abort(struct Scsi_Host *host)
msgptr = &tmp;
len = 1;
phase = PHASE_MSGOUT;
- NCR5380_transfer_pio(host, &phase, &len, &msgptr);
+ NCR5380_transfer_pio(instance, &phase, &len, &msgptr);
/*
* If we got here, and the command completed successfully,
@@ -1899,17 +1823,62 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
SETUP_HOSTDATA(instance);
register int c = *count;
register unsigned char p = *phase;
+ unsigned long flags;
+
+#if defined(CONFIG_SUN3)
+ /* sanity check */
+ if (!sun3_dma_setup_done) {
+ pr_err("scsi%d: transfer_dma without setup!\n",
+ instance->host_no);
+ BUG();
+ }
+ hostdata->dma_len = c;
+
+ dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
+ instance->host_no, (p & SR_IO) ? "reading" : "writing",
+ c, (p & SR_IO) ? "to" : "from", *data);
+
+ /* netbsd turns off ints here, why not be safe and do it too */
+ local_irq_save(flags);
+
+ /* send start chain */
+ sun3scsi_dma_start(c, *data);
+
+ if (p & SR_IO) {
+ NCR5380_write(TARGET_COMMAND_REG, 1);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ NCR5380_write(INITIATOR_COMMAND_REG, 0);
+ NCR5380_write(MODE_REG,
+ (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR));
+ NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0);
+ } else {
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_DATA);
+ NCR5380_write(MODE_REG,
+ (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR));
+ NCR5380_write(START_DMA_SEND_REG, 0);
+ }
+
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_DMA_ENABLE;
+#endif
+
+ local_irq_restore(flags);
+
+ sun3_dma_active = 1;
+
+#else /* !defined(CONFIG_SUN3) */
register unsigned char *d = *data;
unsigned char tmp;
- unsigned long flags;
if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
*phase = tmp;
return -1;
}
- if (atari_read_overruns && (p & SR_IO))
- c -= atari_read_overruns;
+ if (hostdata->read_overruns && (p & SR_IO))
+ c -= hostdata->read_overruns;
dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
HOSTNO, (p & SR_IO) ? "reading" : "writing",
@@ -1921,7 +1890,7 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
#endif /* def REAL_DMA */
- if (IS_A_TT()) {
+ if (!(hostdata->flags & FLAG_LATE_DMA_SETUP)) {
/* On the Medusa, it is a must to initialize the DMA before
* starting the NCR. This is also the cleaner way for the TT.
*/
@@ -1939,7 +1908,7 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
NCR5380_write(START_DMA_SEND_REG, 0);
}
- if (!IS_A_TT()) {
+ if (hostdata->flags & FLAG_LATE_DMA_SETUP) {
/* On the Falcon, the DMA setup must be done after the last */
/* NCR access, else the DMA setup gets trashed!
*/
@@ -1949,6 +1918,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
NCR5380_dma_write_setup(instance, d, c);
local_irq_restore(flags);
}
+#endif /* !defined(CONFIG_SUN3) */
+
return 0;
}
#endif /* defined(REAL_DMA) */
@@ -1982,7 +1953,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
#endif
unsigned char *data;
unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
- Scsi_Cmnd *cmd = (Scsi_Cmnd *) hostdata->connected;
+ struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected;
+
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_INTR;
+#endif
while (1) {
tmp = NCR5380_read(STATUS_REG);
@@ -1993,6 +1968,33 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
old_phase = phase;
NCR5380_dprint_phase(NDEBUG_INFORMATION, instance);
}
+#if defined(CONFIG_SUN3)
+ if (phase == PHASE_CMDOUT) {
+#if defined(REAL_DMA)
+ void *d;
+ unsigned long count;
+
+ if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
+ count = cmd->SCp.buffer->length;
+ d = sg_virt(cmd->SCp.buffer);
+ } else {
+ count = cmd->SCp.this_residual;
+ d = cmd->SCp.ptr;
+ }
+ /* this command setup for dma yet? */
+ if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != cmd)) {
+ if (cmd->request->cmd_type == REQ_TYPE_FS) {
+ sun3scsi_dma_setup(d, count,
+ rq_data_dir(cmd->request));
+ sun3_dma_setup_done = cmd;
+ }
+ }
+#endif
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_INTR;
+#endif
+ }
+#endif /* CONFIG_SUN3 */
if (sink && (phase != PHASE_MSGOUT)) {
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
@@ -2054,8 +2056,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
*/
#if defined(REAL_DMA)
- if (!cmd->device->borken &&
- (transfersize = NCR5380_dma_xfer_len(instance,cmd,phase)) > 31) {
+ if (
+#if !defined(CONFIG_SUN3)
+ !cmd->device->borken &&
+#endif
+ (transfersize = NCR5380_dma_xfer_len(instance, cmd, phase)) >= DMA_MIN_SIZE) {
len = transfersize;
cmd->SCp.phase = phase;
if (NCR5380_transfer_dma(instance, &phase,
@@ -2064,9 +2069,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
* If the watchdog timer fires, all future
* accesses to this device will use the
* polled-IO. */
- printk(KERN_NOTICE "scsi%d: switching target %d "
- "lun %llu to slow handshake\n", HOSTNO,
- cmd->device->id, cmd->device->lun);
+ scmd_printk(KERN_INFO, cmd,
+ "switching to slow handshake\n");
cmd->device->borken = 1;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
ICR_ASSERT_ATN);
@@ -2092,6 +2096,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
NCR5380_transfer_pio(instance, &phase,
(int *)&cmd->SCp.this_residual,
(unsigned char **)&cmd->SCp.ptr);
+#if defined(CONFIG_SUN3) && defined(REAL_DMA)
+ /* if we had intended to dma that command clear it */
+ if (sun3_dma_setup_done == cmd)
+ sun3_dma_setup_done = NULL;
+#endif
break;
case PHASE_MSGIN:
len = 1;
@@ -2145,9 +2154,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked request "
"done, calling scsi_done().\n",
HOSTNO, cmd->device->id, cmd->device->lun);
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
cmd->scsi_done(cmd);
cmd = hostdata->connected;
break;
@@ -2156,11 +2162,12 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
case COMMAND_COMPLETE:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* ++guenther: possible race with Falcon locking */
- falcon_dont_release++;
- hostdata->connected = NULL;
dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d, lun %llu "
"completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
+
+ local_irq_save(flags);
+ hostdata->retain_dma_intr++;
+ hostdata->connected = NULL;
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
if (status_byte(cmd->SCp.Status) == QUEUE_FULL) {
@@ -2172,7 +2179,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
*/
/* ++Andreas: the mid level code knows about
QUEUE_FULL now. */
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
+ struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][cmd->device->lun];
dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu returned "
"QUEUE_FULL after %d commands\n",
HOSTNO, cmd->device->id, cmd->device->lun,
@@ -2207,7 +2214,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
else if (status_byte(cmd->SCp.Status) != GOOD)
cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
-#ifdef AUTOSENSE
if ((cmd->cmnd[0] == REQUEST_SENSE) &&
hostdata->ses.cmd_len) {
scsi_eh_restore_cmnd(cmd, &hostdata->ses);
@@ -2220,22 +2226,17 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
dprintk(NDEBUG_AUTOSENSE, "scsi%d: performing request sense\n", HOSTNO);
- local_irq_save(flags);
LIST(cmd,hostdata->issue_queue);
SET_NEXT(cmd, hostdata->issue_queue);
- hostdata->issue_queue = (Scsi_Cmnd *) cmd;
- local_irq_restore(flags);
+ hostdata->issue_queue = (struct scsi_cmnd *) cmd;
dprintk(NDEBUG_QUEUES, "scsi%d: REQUEST SENSE added to head of "
"issue queue\n", H_NO(cmd));
- } else
-#endif /* def AUTOSENSE */
- {
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
+ } else {
cmd->scsi_done(cmd);
}
+ local_irq_restore(flags);
+
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
/*
* Restore phase bits to 0 so an interrupted selection,
@@ -2246,12 +2247,14 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
barrier();
- falcon_dont_release--;
+ local_irq_save(flags);
+ hostdata->retain_dma_intr--;
/* ++roman: For Falcon SCSI, release the lock on the
* ST-DMA here if no other commands are waiting on the
* disconnected queue.
*/
- falcon_release_lock_if_possible(hostdata);
+ maybe_release_dma_irq(instance);
+ local_irq_restore(flags);
return;
case MESSAGE_REJECT:
/* Accept message by clearing ACK */
@@ -2303,6 +2306,9 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
/* Wait for bus free to avoid nasty timeouts */
while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
barrier();
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_DMA_ENABLE;
+#endif
return;
/*
* The SCSI data pointer is *IMPLICITLY* saved on a disconnect
@@ -2384,20 +2390,18 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
*/
default:
if (!tmp) {
- printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO);
+ printk(KERN_INFO "scsi%d: rejecting message ",
+ instance->host_no);
spi_print_msg(extended_msg);
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
- printk(KERN_DEBUG "scsi%d: rejecting unknown "
- "message %02x from target %d, lun %llu\n",
- HOSTNO, tmp, cmd->device->id, cmd->device->lun);
+ scmd_printk(KERN_INFO, cmd,
+ "rejecting unknown message %02x\n",
+ tmp);
else
- printk(KERN_DEBUG "scsi%d: rejecting unknown "
- "extended message "
- "code %02x, length %d from target %d, lun %llu\n",
- HOSTNO, extended_msg[1], extended_msg[0],
- cmd->device->id, cmd->device->lun);
-
+ scmd_printk(KERN_INFO, cmd,
+ "rejecting unknown extended message code %02x, length %d\n",
+ extended_msg[1], extended_msg[0]);
msgout = MESSAGE_REJECT;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
@@ -2410,6 +2414,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
hostdata->last_message = msgout;
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
+ local_irq_save(flags);
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
#else
@@ -2417,12 +2422,10 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
#endif
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
- cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- falcon_release_lock_if_possible(hostdata);
+ maybe_release_dma_irq(instance);
+ local_irq_restore(flags);
+ cmd->scsi_done(cmd);
return;
}
msgout = NOP;
@@ -2455,7 +2458,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
* Function : void NCR5380_reselect (struct Scsi_Host *instance)
*
* Purpose : does reselection, initializing the instance->connected
- * field to point to the Scsi_Cmnd for which the I_T_L or I_T_L_Q
+ * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
* nexus has been reestablished,
*
* Inputs : instance - this instance of the NCR5380.
@@ -2463,19 +2466,21 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
*/
+/* it might eventually prove necessary to do a dma setup on
+ reselection, but it doesn't seem to be needed now -- sam */
+
static void NCR5380_reselect(struct Scsi_Host *instance)
{
SETUP_HOSTDATA(instance);
unsigned char target_mask;
- unsigned char lun, phase;
- int len;
+ unsigned char lun;
#ifdef SUPPORT_TAGS
unsigned char tag;
#endif
unsigned char msg[3];
- unsigned char *data;
- Scsi_Cmnd *tmp = NULL, *prev;
-/* unsigned long flags; */
+ int __maybe_unused len;
+ unsigned char __maybe_unused *data, __maybe_unused phase;
+ struct scsi_cmnd *tmp = NULL, *prev;
/*
* Disable arbitration, etc. since the host adapter obviously
@@ -2511,10 +2516,18 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
while (!(NCR5380_read(STATUS_REG) & SR_REQ))
;
+#if defined(CONFIG_SUN3) && defined(REAL_DMA)
+ /* acknowledge toggle to MSGIN */
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(PHASE_MSGIN));
+
+ /* peek at the byte without really hitting the bus */
+ msg[0] = NCR5380_read(CURRENT_SCSI_DATA_REG);
+#else
len = 1;
data = msg;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
+#endif
if (!(msg[0] & 0x80)) {
printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
@@ -2524,13 +2537,13 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
}
lun = (msg[0] & 0x07);
-#ifdef SUPPORT_TAGS
+#if defined(SUPPORT_TAGS) && !defined(CONFIG_SUN3)
/* If the phase is still MSGIN, the target wants to send some more
* messages. In case it supports tagged queuing, this is probably a
* SIMPLE_QUEUE_TAG for the I_T_L_Q nexus.
*/
tag = TAG_NONE;
- if (phase == PHASE_MSGIN && setup_use_tagged_queuing) {
+ if (phase == PHASE_MSGIN && (hostdata->flags & FLAG_TAGGED_QUEUING)) {
/* Accept previous IDENTIFY message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
len = 2;
@@ -2548,15 +2561,13 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
* just reestablished, and remove it from the disconnected queue.
*/
- for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue, prev = NULL;
+ for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
tmp; prev = tmp, tmp = NEXT(tmp)) {
if ((target_mask == (1 << tmp->device->id)) && (lun == tmp->device->lun)
#ifdef SUPPORT_TAGS
&& (tag == tmp->tag)
#endif
) {
- /* ++guenther: prevent race with falcon_release_lock */
- falcon_dont_release++;
if (prev) {
REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
SET_NEXT(prev, NEXT(tmp));
@@ -2588,26 +2599,67 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
return;
}
+#if defined(CONFIG_SUN3) && defined(REAL_DMA)
+ /* engage dma setup for the command we just saw */
+ {
+ void *d;
+ unsigned long count;
+
+ if (!tmp->SCp.this_residual && tmp->SCp.buffers_residual) {
+ count = tmp->SCp.buffer->length;
+ d = sg_virt(tmp->SCp.buffer);
+ } else {
+ count = tmp->SCp.this_residual;
+ d = tmp->SCp.ptr;
+ }
+ /* setup this command for dma if not already */
+ if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != tmp)) {
+ sun3scsi_dma_setup(d, count, rq_data_dir(tmp->request));
+ sun3_dma_setup_done = tmp;
+ }
+ }
+
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
+#endif
+
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+#if defined(SUPPORT_TAGS) && defined(CONFIG_SUN3)
+ /* If the phase is still MSGIN, the target wants to send some more
+ * messages. In case it supports tagged queuing, this is probably a
+ * SIMPLE_QUEUE_TAG for the I_T_L_Q nexus.
+ */
+ tag = TAG_NONE;
+ if (phase == PHASE_MSGIN && setup_use_tagged_queuing) {
+ /* Accept previous IDENTIFY message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ len = 2;
+ data = msg + 1;
+ if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
+ msg[1] == SIMPLE_QUEUE_TAG)
+ tag = msg[2];
+ dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at reselection\n"
+ HOSTNO, target_mask, lun, tag);
+ }
+#endif
+
hostdata->connected = tmp;
dprintk(NDEBUG_RESELECTION, "scsi%d: nexus established, target = %d, lun = %llu, tag = %d\n",
HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
- falcon_dont_release--;
}
/*
- * Function : int NCR5380_abort (Scsi_Cmnd *cmd)
+ * Function : int NCR5380_abort (struct scsi_cmnd *cmd)
*
* Purpose : abort a command
*
- * Inputs : cmd - the Scsi_Cmnd to abort, code - code to set the
+ * Inputs : cmd - the scsi_cmnd to abort, code - code to set the
* host byte of the result field to, if zero DID_ABORTED is
* used.
*
- * Returns : 0 - success, -1 on failure.
+ * Returns : SUCCESS - success, FAILED on failure.
*
* XXX - there is no way to abort the command that is currently
* connected, you have to wait for it to complete. If this is
@@ -2616,24 +2668,19 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
*/
static
-int NCR5380_abort(Scsi_Cmnd *cmd)
+int NCR5380_abort(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
SETUP_HOSTDATA(instance);
- Scsi_Cmnd *tmp, **prev;
+ struct scsi_cmnd *tmp, **prev;
unsigned long flags;
- printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
- scsi_print_command(cmd);
+ scmd_printk(KERN_NOTICE, cmd, "aborting command\n");
NCR5380_print_status(instance);
local_irq_save(flags);
- if (!IS_A_TT() && !falcon_got_lock)
- printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_abort\n",
- HOSTNO);
-
dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
NCR5380_read(BUS_AND_STATUS_REG),
NCR5380_read(STATUS_REG));
@@ -2674,12 +2721,12 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
#else
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
+ maybe_release_dma_irq(instance);
local_irq_restore(flags);
cmd->scsi_done(cmd);
- falcon_release_lock_if_possible(hostdata);
return SUCCESS;
} else {
-/* local_irq_restore(flags); */
+ local_irq_restore(flags);
printk("scsi%d: abort of connected command failed!\n", HOSTNO);
return FAILED;
}
@@ -2690,21 +2737,21 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
* Case 2 : If the command hasn't been issued yet, we simply remove it
* from the issue queue.
*/
- for (prev = (Scsi_Cmnd **)&(hostdata->issue_queue),
- tmp = (Scsi_Cmnd *)hostdata->issue_queue;
+ for (prev = (struct scsi_cmnd **)&(hostdata->issue_queue),
+ tmp = (struct scsi_cmnd *)hostdata->issue_queue;
tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
if (cmd == tmp) {
REMOVE(5, *prev, tmp, NEXT(tmp));
(*prev) = NEXT(tmp);
SET_NEXT(tmp, NULL);
tmp->result = DID_ABORT << 16;
+ maybe_release_dma_irq(instance);
local_irq_restore(flags);
dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n",
HOSTNO);
/* Tagged queuing note: no tag to free here, hasn't been assigned
* yet... */
tmp->scsi_done(tmp);
- falcon_release_lock_if_possible(hostdata);
return SUCCESS;
}
}
@@ -2751,13 +2798,13 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
* it from the disconnected queue.
*/
- for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue; tmp;
+ for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp;
tmp = NEXT(tmp)) {
if (cmd == tmp) {
local_irq_restore(flags);
dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
- if (NCR5380_select(instance, cmd, (int)cmd->tag))
+ if (NCR5380_select(instance, cmd))
return FAILED;
dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);
@@ -2765,8 +2812,8 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
do_abort(instance);
local_irq_save(flags);
- for (prev = (Scsi_Cmnd **)&(hostdata->disconnected_queue),
- tmp = (Scsi_Cmnd *)hostdata->disconnected_queue;
+ for (prev = (struct scsi_cmnd **)&(hostdata->disconnected_queue),
+ tmp = (struct scsi_cmnd *)hostdata->disconnected_queue;
tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
if (cmd == tmp) {
REMOVE(5, *prev, tmp, NEXT(tmp));
@@ -2782,15 +2829,22 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
#else
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
+ maybe_release_dma_irq(instance);
local_irq_restore(flags);
tmp->scsi_done(tmp);
- falcon_release_lock_if_possible(hostdata);
return SUCCESS;
}
}
}
}
+ /* Maybe it is sufficient just to release the ST-DMA lock... (if
+ * possible at all) At least, we should check if the lock could be
+ * released after the abort, in case it is kept due to some bug.
+ */
+ maybe_release_dma_irq(instance);
+ local_irq_restore(flags);
+
/*
* Case 5 : If we reached this point, the command was not found in any of
* the queues.
@@ -2801,21 +2855,14 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
* broke.
*/
- local_irq_restore(flags);
printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
- /* Maybe it is sufficient just to release the ST-DMA lock... (if
- * possible at all) At least, we should check if the lock could be
- * released after the abort, in case it is kept due to some bug.
- */
- falcon_release_lock_if_possible(hostdata);
-
return FAILED;
}
/*
- * Function : int NCR5380_reset (Scsi_Cmnd *cmd)
+ * Function : int NCR5380_reset (struct scsi_cmnd *cmd)
*
* Purpose : reset the SCSI bus.
*
@@ -2823,20 +2870,14 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
*
*/
-static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
+static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
{
- SETUP_HOSTDATA(cmd->device->host);
+ struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int i;
unsigned long flags;
-#if defined(RESET_RUN_DONE)
- Scsi_Cmnd *connected, *disconnected_queue;
-#endif
-
- if (!IS_A_TT() && !falcon_got_lock)
- printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_reset\n",
- H_NO(cmd));
- NCR5380_print_status(cmd->device->host);
+ NCR5380_print_status(instance);
/* get in phase */
NCR5380_write(TARGET_COMMAND_REG,
@@ -2853,89 +2894,6 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
* through anymore ... */
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- /* MSch 20140115 - looking at the generic NCR5380 driver, all of this
- * should go.
- * Catch-22: if we don't clear all queues, the SCSI driver lock will
- * not be reset by atari_scsi_reset()!
- */
-
-#if defined(RESET_RUN_DONE)
- /* XXX Should now be done by midlevel code, but it's broken XXX */
- /* XXX see below XXX */
-
- /* MSch: old-style reset: actually abort all command processing here */
-
- /* After the reset, there are no more connected or disconnected commands
- * and no busy units; to avoid problems with re-inserting the commands
- * into the issue_queue (via scsi_done()), the aborted commands are
- * remembered in local variables first.
- */
- local_irq_save(flags);
- connected = (Scsi_Cmnd *)hostdata->connected;
- hostdata->connected = NULL;
- disconnected_queue = (Scsi_Cmnd *)hostdata->disconnected_queue;
- hostdata->disconnected_queue = NULL;
-#ifdef SUPPORT_TAGS
- free_all_tags();
-#endif
- for (i = 0; i < 8; ++i)
- hostdata->busy[i] = 0;
-#ifdef REAL_DMA
- hostdata->dma_len = 0;
-#endif
- local_irq_restore(flags);
-
- /* In order to tell the mid-level code which commands were aborted,
- * set the command status to DID_RESET and call scsi_done() !!!
- * This ultimately aborts processing of these commands in the mid-level.
- */
-
- if ((cmd = connected)) {
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd));
- cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
- cmd->scsi_done(cmd);
- }
-
- for (i = 0; (cmd = disconnected_queue); ++i) {
- disconnected_queue = NEXT(cmd);
- SET_NEXT(cmd, NULL);
- cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
- cmd->scsi_done(cmd);
- }
- if (i > 0)
- dprintk(NDEBUG_ABORT, "scsi: reset aborted %d disconnected command(s)\n", i);
-
- /* The Falcon lock should be released after a reset...
- */
- /* ++guenther: moved to atari_scsi_reset(), to prevent a race between
- * unlocking and enabling dma interrupt.
- */
-/* falcon_release_lock_if_possible( hostdata );*/
-
- /* since all commands have been explicitly terminated, we need to tell
- * the midlevel code that the reset was SUCCESSFUL, and there is no
- * need to 'wake up' the commands by a request_sense
- */
- return SUCCESS;
-#else /* 1 */
-
- /* MSch: new-style reset handling: let the mid-level do what it can */
-
- /* ++guenther: MID-LEVEL IS STILL BROKEN.
- * Mid-level is supposed to requeue all commands that were active on the
- * various low-level queues. In fact it does this, but that's not enough
- * because all these commands are subject to timeout. And if a timeout
- * happens for any removed command, *_abort() is called but all queues
- * are now empty. Abort then gives up the falcon lock, which is fatal,
- * since the mid-level will queue more commands and must have the lock
- * (it's all happening inside timer interrupt handler!!).
- * Even worse, abort will return NOT_RUNNING for all those commands not
- * on any queue, so they won't be retried ...
- *
- * Conclusion: either scsi.c disables timeout for all resetted commands
- * immediately, or we lose! As of linux-2.0.20 it doesn't.
- */
-
/* After the reset, there are no more connected or disconnected commands
* and no busy units; so clear the low-level status here to avoid
* conflicts when the mid-level code tries to wake up the affected
@@ -2954,16 +2912,16 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
hostdata->connected = NULL;
hostdata->disconnected_queue = NULL;
#ifdef SUPPORT_TAGS
- free_all_tags();
+ free_all_tags(hostdata);
#endif
for (i = 0; i < 8; ++i)
hostdata->busy[i] = 0;
#ifdef REAL_DMA
hostdata->dma_len = 0;
#endif
+
+ maybe_release_dma_irq(instance);
local_irq_restore(flags);
- /* we did no complete reset of all commands, so a wakeup is required */
return SUCCESS;
-#endif /* 1 */
}