summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla4xxx/ql4_os.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla4xxx/ql4_os.c')
-rw-r--r--drivers/scsi/qla4xxx/ql4_os.c137
1 files changed, 107 insertions, 30 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 4169c8baa112..ec393a00c038 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -128,7 +128,7 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
static int qla4xxx_slave_alloc(struct scsi_device *device);
static int qla4xxx_slave_configure(struct scsi_device *device);
static void qla4xxx_slave_destroy(struct scsi_device *sdev);
-static mode_t ql4_attr_is_visible(int param_type, int param);
+static umode_t ql4_attr_is_visible(int param_type, int param);
static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type);
static struct qla4_8xxx_legacy_intr_set legacy_intr[] =
@@ -197,7 +197,7 @@ static struct iscsi_transport qla4xxx_iscsi_transport = {
static struct scsi_transport_template *qla4xxx_scsi_transport;
-static mode_t ql4_attr_is_visible(int param_type, int param)
+static umode_t ql4_attr_is_visible(int param_type, int param)
{
switch (param_type) {
case ISCSI_HOST_PARAM:
@@ -935,7 +935,16 @@ qla4xxx_iface_set_param(struct Scsi_Host *shost, void *data, uint32_t len)
goto exit_init_fw_cb;
}
- qla4xxx_disable_acb(ha);
+ rval = qla4xxx_disable_acb(ha);
+ if (rval != QLA_SUCCESS) {
+ ql4_printk(KERN_ERR, ha, "%s: disable acb mbx failed\n",
+ __func__);
+ rval = -EIO;
+ goto exit_init_fw_cb;
+ }
+
+ wait_for_completion_timeout(&ha->disable_acb_comp,
+ DISABLE_ACB_TOV * HZ);
qla4xxx_initcb_to_acb(init_fw_cb);
@@ -1966,9 +1975,10 @@ mem_alloc_error_exit:
*
* Context: Interrupt
**/
-static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
+static int qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
{
- uint32_t fw_heartbeat_counter, halt_status;
+ uint32_t fw_heartbeat_counter;
+ int status = QLA_SUCCESS;
fw_heartbeat_counter = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER);
/* If PEG_ALIVE_COUNTER is 0xffffffff, AER/EEH is in progress, ignore */
@@ -1976,7 +1986,7 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen "
"state, QLA82XX_PEG_ALIVE_COUNTER is 0xffffffff\n",
ha->host_no, __func__));
- return;
+ return status;
}
if (ha->fw_heartbeat_counter == fw_heartbeat_counter) {
@@ -1984,8 +1994,6 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
/* FW not alive after 2 seconds */
if (ha->seconds_since_last_heartbeat == 2) {
ha->seconds_since_last_heartbeat = 0;
- halt_status = qla4_8xxx_rd_32(ha,
- QLA82XX_PEG_HALT_STATUS1);
ql4_printk(KERN_INFO, ha,
"scsi(%ld): %s, Dumping hw/fw registers:\n "
@@ -1993,7 +2001,9 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
" 0x%x,\n PEG_NET_0_PC: 0x%x, PEG_NET_1_PC:"
" 0x%x,\n PEG_NET_2_PC: 0x%x, PEG_NET_3_PC:"
" 0x%x,\n PEG_NET_4_PC: 0x%x\n",
- ha->host_no, __func__, halt_status,
+ ha->host_no, __func__,
+ qla4_8xxx_rd_32(ha,
+ QLA82XX_PEG_HALT_STATUS1),
qla4_8xxx_rd_32(ha,
QLA82XX_PEG_HALT_STATUS2),
qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_0 +
@@ -2006,24 +2016,13 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
0x3c),
qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 +
0x3c));
-
- /* Since we cannot change dev_state in interrupt
- * context, set appropriate DPC flag then wakeup
- * DPC */
- if (halt_status & HALT_STATUS_UNRECOVERABLE)
- set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
- else {
- printk("scsi%ld: %s: detect abort needed!\n",
- ha->host_no, __func__);
- set_bit(DPC_RESET_HA, &ha->dpc_flags);
- }
- qla4xxx_wake_dpc(ha);
- qla4xxx_mailbox_premature_completion(ha);
+ status = QLA_ERROR;
}
} else
ha->seconds_since_last_heartbeat = 0;
ha->fw_heartbeat_counter = fw_heartbeat_counter;
+ return status;
}
/**
@@ -2034,14 +2033,13 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
**/
void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
{
- uint32_t dev_state;
-
- dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+ uint32_t dev_state, halt_status;
/* don't poll if reset is going on */
if (!(test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags))) {
+ dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
if (dev_state == QLA82XX_DEV_NEED_RESET &&
!test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
if (!ql4xdontresethba) {
@@ -2049,7 +2047,6 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
"NEED RESET!\n", __func__);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
qla4xxx_wake_dpc(ha);
- qla4xxx_mailbox_premature_completion(ha);
}
} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
!test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) {
@@ -2059,7 +2056,24 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
qla4xxx_wake_dpc(ha);
} else {
/* Check firmware health */
- qla4_8xxx_check_fw_alive(ha);
+ if (qla4_8xxx_check_fw_alive(ha)) {
+ halt_status = qla4_8xxx_rd_32(ha,
+ QLA82XX_PEG_HALT_STATUS1);
+
+ /* Since we cannot change dev_state in interrupt
+ * context, set appropriate DPC flag then wakeup
+ * DPC */
+ if (halt_status & HALT_STATUS_UNRECOVERABLE)
+ set_bit(DPC_HA_UNRECOVERABLE,
+ &ha->dpc_flags);
+ else {
+ ql4_printk(KERN_INFO, ha, "%s: detect "
+ "abort needed!\n", __func__);
+ set_bit(DPC_RESET_HA, &ha->dpc_flags);
+ }
+ qla4xxx_mailbox_premature_completion(ha);
+ qla4xxx_wake_dpc(ha);
+ }
}
}
}
@@ -2414,6 +2428,8 @@ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha)
{
int status = QLA_ERROR;
uint8_t reset_chip = 0;
+ uint32_t dev_state;
+ unsigned long wait;
/* Stall incoming I/O until we are done */
scsi_block_requests(ha->host);
@@ -2464,8 +2480,29 @@ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha)
* or if stop_firmware fails for ISP-82xx.
* This is the default case for ISP-4xxx */
if (!is_qla8022(ha) || reset_chip) {
+ if (!is_qla8022(ha))
+ goto chip_reset;
+
+ /* Check if 82XX firmware is alive or not
+ * We may have arrived here from NEED_RESET
+ * detection only */
+ if (test_bit(AF_FW_RECOVERY, &ha->flags))
+ goto chip_reset;
+
+ wait = jiffies + (FW_ALIVE_WAIT_TOV * HZ);
+ while (time_before(jiffies, wait)) {
+ if (qla4_8xxx_check_fw_alive(ha)) {
+ qla4xxx_mailbox_premature_completion(ha);
+ break;
+ }
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
if (!test_bit(AF_FW_RECOVERY, &ha->flags))
qla4xxx_cmd_wait(ha);
+chip_reset:
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
DEBUG2(ql4_printk(KERN_INFO, ha,
@@ -2501,6 +2538,25 @@ recover_ha_init_adapter:
* Since we don't want to block the DPC for too long
* with multiple resets in the same thread,
* utilize DPC to retry */
+ if (is_qla8022(ha)) {
+ qla4_8xxx_idc_lock(ha);
+ dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+ qla4_8xxx_idc_unlock(ha);
+ if (dev_state == QLA82XX_DEV_FAILED) {
+ ql4_printk(KERN_INFO, ha, "%s: don't retry "
+ "recover adapter. H/W is in Failed "
+ "state\n", __func__);
+ qla4xxx_dead_adapter_cleanup(ha);
+ clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
+ clear_bit(DPC_RESET_HA, &ha->dpc_flags);
+ clear_bit(DPC_RESET_HA_FW_CONTEXT,
+ &ha->dpc_flags);
+ status = QLA_ERROR;
+
+ goto exit_recover;
+ }
+ }
+
if (!test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags)) {
ha->retry_reset_ha_cnt = MAX_RESET_HA_RETRIES;
DEBUG2(printk("scsi%ld: recover adapter - retrying "
@@ -2539,6 +2595,7 @@ recover_ha_init_adapter:
clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
}
+exit_recover:
ha->adapter_error_count++;
if (test_bit(AF_ONLINE, &ha->flags))
@@ -2806,6 +2863,7 @@ dpc_post_reset_ha:
**/
static void qla4xxx_free_adapter(struct scsi_qla_host *ha)
{
+ qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16);
if (test_bit(AF_INTERRUPTS_ON, &ha->flags)) {
/* Turn-off interrupts on the card. */
@@ -3039,7 +3097,7 @@ static ssize_t qla4xxx_show_boot_eth_info(void *data, int type, char *buf)
return rc;
}
-static mode_t qla4xxx_eth_get_attr_visibility(void *data, int type)
+static umode_t qla4xxx_eth_get_attr_visibility(void *data, int type)
{
int rc;
@@ -3073,7 +3131,7 @@ static ssize_t qla4xxx_show_boot_ini_info(void *data, int type, char *buf)
return rc;
}
-static mode_t qla4xxx_ini_get_attr_visibility(void *data, int type)
+static umode_t qla4xxx_ini_get_attr_visibility(void *data, int type)
{
int rc;
@@ -3160,7 +3218,7 @@ static ssize_t qla4xxx_show_boot_tgt_sec_info(void *data, int type, char *buf)
return qla4xxx_show_boot_tgt_info(boot_sess, type, buf);
}
-static mode_t qla4xxx_tgt_get_attr_visibility(void *data, int type)
+static umode_t qla4xxx_tgt_get_attr_visibility(void *data, int type)
{
int rc;
@@ -4816,6 +4874,20 @@ static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd)
}
/**
+ * qla4xxx_is_eh_active - check if error handler is running
+ * @shost: Pointer to SCSI Host struct
+ *
+ * This routine finds that if reset host is called in EH
+ * scenario or from some application like sg_reset
+ **/
+static int qla4xxx_is_eh_active(struct Scsi_Host *shost)
+{
+ if (shost->shost_state == SHOST_RECOVERY)
+ return 1;
+ return 0;
+}
+
+/**
* qla4xxx_eh_host_reset - kernel callback
* @cmd: Pointer to Linux's SCSI command structure
*
@@ -4832,6 +4904,11 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
if (ql4xdontresethba) {
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
ha->host_no, __func__));
+
+ /* Clear outstanding srb in queues */
+ if (qla4xxx_is_eh_active(cmd->device->host))
+ qla4xxx_abort_active_cmds(ha, DID_ABORT << 16);
+
return FAILED;
}