diff options
Diffstat (limited to 'drivers/staging/wusbcore/mmc.c')
-rw-r--r-- | drivers/staging/wusbcore/mmc.c | 303 |
1 files changed, 0 insertions, 303 deletions
diff --git a/drivers/staging/wusbcore/mmc.c b/drivers/staging/wusbcore/mmc.c deleted file mode 100644 index 881e1f20d718..000000000000 --- a/drivers/staging/wusbcore/mmc.c +++ /dev/null @@ -1,303 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) - * MMC (Microscheduled Management Command) handling - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * WUIEs and MMC IEs...well, they are almost the same at the end. MMC - * IEs are Wireless USB IEs that go into the MMC period...[what is - * that? look in Design-overview.txt]. - * - * - * This is a simple subsystem to keep track of which IEs are being - * sent by the host in the MMC period. - * - * For each WUIE we ask to send, we keep it in an array, so we can - * request its removal later, or replace the content. They are tracked - * by pointer, so be sure to use the same pointer if you want to - * remove it or update the contents. - * - * FIXME: - * - add timers that autoremove intervalled IEs? - */ -#include <linux/slab.h> -#include <linux/export.h> -#include "include/wusb.h" -#include "wusbhc.h" - -/* Initialize the MMCIEs handling mechanism */ -int wusbhc_mmcie_create(struct wusbhc *wusbhc) -{ - u8 mmcies = wusbhc->mmcies_max; - wusbhc->mmcie = kcalloc(mmcies, sizeof(wusbhc->mmcie[0]), GFP_KERNEL); - if (wusbhc->mmcie == NULL) - return -ENOMEM; - mutex_init(&wusbhc->mmcie_mutex); - return 0; -} - -/* Release resources used by the MMCIEs handling mechanism */ -void wusbhc_mmcie_destroy(struct wusbhc *wusbhc) -{ - kfree(wusbhc->mmcie); -} - -/* - * Add or replace an MMC Wireless USB IE. - * - * @interval: See WUSB1.0[8.5.3.1] - * @repeat_cnt: See WUSB1.0[8.5.3.1] - * @handle: See WUSB1.0[8.5.3.1] - * @wuie: Pointer to the header of the WUSB IE data to add. - * MUST BE allocated in a kmalloc buffer (no stack or - * vmalloc). - * THE CALLER ALWAYS OWNS THE POINTER (we don't free it - * on remove, we just forget about it). - * @returns: 0 if ok, < 0 errno code on error. - * - * Goes over the *whole* @wusbhc->mmcie array looking for (a) the - * first free spot and (b) if @wuie is already in the array (aka: - * transmitted in the MMCs) the spot were it is. - * - * If present, we "overwrite it" (update). - * - * - * NOTE: Need special ordering rules -- see below WUSB1.0 Table 7-38. - * The host uses the handle as the 'sort' index. We - * allocate the last one always for the WUIE_ID_HOST_INFO, and - * the rest, first come first serve in inverse order. - * - * Host software must make sure that it adds the other IEs in - * the right order... the host hardware is responsible for - * placing the WCTA IEs in the right place with the other IEs - * set by host software. - * - * NOTE: we can access wusbhc->wa_descr without locking because it is - * read only. - */ -int wusbhc_mmcie_set(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - struct wuie_hdr *wuie) -{ - int result = -ENOBUFS; - unsigned handle, itr; - - /* Search a handle, taking into account the ordering */ - mutex_lock(&wusbhc->mmcie_mutex); - switch (wuie->bIEIdentifier) { - case WUIE_ID_HOST_INFO: - /* Always last */ - handle = wusbhc->mmcies_max - 1; - break; - case WUIE_ID_ISOCH_DISCARD: - dev_err(wusbhc->dev, "Special ordering case for WUIE ID 0x%x " - "unimplemented\n", wuie->bIEIdentifier); - result = -ENOSYS; - goto error_unlock; - default: - /* search for it or find the last empty slot */ - handle = ~0; - for (itr = 0; itr < wusbhc->mmcies_max - 1; itr++) { - if (wusbhc->mmcie[itr] == wuie) { - handle = itr; - break; - } - if (wusbhc->mmcie[itr] == NULL) - handle = itr; - } - if (handle == ~0) - goto error_unlock; - } - result = (wusbhc->mmcie_add)(wusbhc, interval, repeat_cnt, handle, - wuie); - if (result >= 0) - wusbhc->mmcie[handle] = wuie; -error_unlock: - mutex_unlock(&wusbhc->mmcie_mutex); - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_mmcie_set); - -/* - * Remove an MMC IE previously added with wusbhc_mmcie_set() - * - * @wuie Pointer used to add the WUIE - */ -void wusbhc_mmcie_rm(struct wusbhc *wusbhc, struct wuie_hdr *wuie) -{ - int result; - unsigned handle, itr; - - mutex_lock(&wusbhc->mmcie_mutex); - for (itr = 0; itr < wusbhc->mmcies_max; itr++) { - if (wusbhc->mmcie[itr] == wuie) { - handle = itr; - goto found; - } - } - mutex_unlock(&wusbhc->mmcie_mutex); - return; - -found: - result = (wusbhc->mmcie_rm)(wusbhc, handle); - if (result == 0) - wusbhc->mmcie[itr] = NULL; - mutex_unlock(&wusbhc->mmcie_mutex); -} -EXPORT_SYMBOL_GPL(wusbhc_mmcie_rm); - -static int wusbhc_mmc_start(struct wusbhc *wusbhc) -{ - int ret; - - mutex_lock(&wusbhc->mutex); - ret = wusbhc->start(wusbhc); - if (ret >= 0) - wusbhc->active = 1; - mutex_unlock(&wusbhc->mutex); - - return ret; -} - -static void wusbhc_mmc_stop(struct wusbhc *wusbhc) -{ - mutex_lock(&wusbhc->mutex); - wusbhc->active = 0; - wusbhc->stop(wusbhc, WUSB_CHANNEL_STOP_DELAY_MS); - mutex_unlock(&wusbhc->mutex); -} - -/* - * wusbhc_start - start transmitting MMCs and accepting connections - * @wusbhc: the HC to start - * - * Establishes a cluster reservation, enables device connections, and - * starts MMCs with appropriate DNTS parameters. - */ -int wusbhc_start(struct wusbhc *wusbhc) -{ - int result; - struct device *dev = wusbhc->dev; - - WARN_ON(wusbhc->wuie_host_info != NULL); - BUG_ON(wusbhc->uwb_rc == NULL); - - result = wusbhc_rsv_establish(wusbhc); - if (result < 0) { - dev_err(dev, "cannot establish cluster reservation: %d\n", - result); - goto error_rsv_establish; - } - - result = wusbhc_devconnect_start(wusbhc); - if (result < 0) { - dev_err(dev, "error enabling device connections: %d\n", - result); - goto error_devconnect_start; - } - - result = wusbhc_sec_start(wusbhc); - if (result < 0) { - dev_err(dev, "error starting security in the HC: %d\n", - result); - goto error_sec_start; - } - - result = wusbhc->set_num_dnts(wusbhc, wusbhc->dnts_interval, - wusbhc->dnts_num_slots); - if (result < 0) { - dev_err(dev, "Cannot set DNTS parameters: %d\n", result); - goto error_set_num_dnts; - } - result = wusbhc_mmc_start(wusbhc); - if (result < 0) { - dev_err(dev, "error starting wusbch: %d\n", result); - goto error_wusbhc_start; - } - - return 0; - -error_wusbhc_start: - wusbhc_sec_stop(wusbhc); -error_set_num_dnts: -error_sec_start: - wusbhc_devconnect_stop(wusbhc); -error_devconnect_start: - wusbhc_rsv_terminate(wusbhc); -error_rsv_establish: - return result; -} - -/* - * wusbhc_stop - stop transmitting MMCs - * @wusbhc: the HC to stop - * - * Stops the WUSB channel and removes the cluster reservation. - */ -void wusbhc_stop(struct wusbhc *wusbhc) -{ - wusbhc_mmc_stop(wusbhc); - wusbhc_sec_stop(wusbhc); - wusbhc_devconnect_stop(wusbhc); - wusbhc_rsv_terminate(wusbhc); -} - -/* - * Set/reset/update a new CHID - * - * Depending on the previous state of the MMCs, start, stop or change - * the sent MMC. This effectively switches the host controller on and - * off (radio wise). - */ -int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) -{ - int result = 0; - - if (memcmp(chid, &wusb_ckhdid_zero, sizeof(*chid)) == 0) - chid = NULL; - - mutex_lock(&wusbhc->mutex); - if (chid) { - if (wusbhc->active) { - mutex_unlock(&wusbhc->mutex); - return -EBUSY; - } - wusbhc->chid = *chid; - } - - /* register with UWB if we haven't already since we are about to start - the radio. */ - if ((chid) && (wusbhc->uwb_rc == NULL)) { - wusbhc->uwb_rc = uwb_rc_get_by_grandpa(wusbhc->dev->parent); - if (wusbhc->uwb_rc == NULL) { - result = -ENODEV; - dev_err(wusbhc->dev, - "Cannot get associated UWB Host Controller\n"); - goto error_rc_get; - } - - result = wusbhc_pal_register(wusbhc); - if (result < 0) { - dev_err(wusbhc->dev, "Cannot register as a UWB PAL\n"); - goto error_pal_register; - } - } - mutex_unlock(&wusbhc->mutex); - - if (chid) - result = uwb_radio_start(&wusbhc->pal); - else if (wusbhc->uwb_rc) - uwb_radio_stop(&wusbhc->pal); - - return result; - -error_pal_register: - uwb_rc_put(wusbhc->uwb_rc); - wusbhc->uwb_rc = NULL; -error_rc_get: - mutex_unlock(&wusbhc->mutex); - - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_chid_set); |