1 files changed, 79 insertions, 38 deletions

diff --git a/drivers/thermal/loongson2_thermal.c b/drivers/thermal/loongson2_thermal.c
index 0f475fe46bc9..2d6b75b0539f 100644
--- a/drivers/thermal/loongson2_thermal.c
+++ b/drivers/thermal/loongson2_thermal.c
@@ -14,58 +14,81 @@
 #include <linux/property.h>
 #include <linux/thermal.h>
 #include <linux/units.h>
+
 #include "thermal_hwmon.h"
 
-#define LOONGSON2_MAX_SENSOR_SEL_NUM			3
+#define LOONGSON2_MAX_SENSOR_SEL_NUM	3
+
+#define LOONGSON2_THSENS_CTRL_HI_REG	0x0
+#define LOONGSON2_THSENS_CTRL_LOW_REG	0x8
+#define LOONGSON2_THSENS_STATUS_REG	0x10
+#define LOONGSON2_THSENS_OUT_REG	0x14
 
-#define LOONGSON2_THSENS_CTRL_HI_REG			0x0
-#define LOONGSON2_THSENS_CTRL_LOW_REG			0x8
-#define LOONGSON2_THSENS_STATUS_REG			0x10
-#define LOONGSON2_THSENS_OUT_REG			0x14
+#define LOONGSON2_THSENS_INT_LO		BIT(0)
+#define LOONGSON2_THSENS_INT_HIGH	BIT(1)
+#define LOONGSON2_THSENS_INT_EN		(LOONGSON2_THSENS_INT_LO | \
+					 LOONGSON2_THSENS_INT_HIGH)
+#define LOONGSON2_THSENS_OUT_MASK	0xFF
 
-#define LOONGSON2_THSENS_INT_LO				BIT(0)
-#define LOONGSON2_THSENS_INT_HIGH			BIT(1)
-#define LOONGSON2_THSENS_OUT_MASK			0xFF
+/*
+ * This flag is used to indicate the temperature reading
+ * method of the Loongson-2K2000
+ */
+#define LS2K2000_THSENS_OUT_FLAG	BIT(0)
 
 struct loongson2_thermal_chip_data {
-	unsigned int	thermal_sensor_sel;
+	unsigned int thermal_sensor_sel;
+	unsigned int flags;
 };
 
 struct loongson2_thermal_data {
-	void __iomem	*regs;
+	void __iomem *ctrl_reg;
+	void __iomem *temp_reg;
 	const struct loongson2_thermal_chip_data *chip_data;
 };
 
+static void loongson2_set_ctrl_regs(struct loongson2_thermal_data *data,
+				    int ctrl_data, bool low, bool enable)
+{
+	int reg_ctrl = 0;
+	int reg_off  = data->chip_data->thermal_sensor_sel * 2;
+	int ctrl_reg = low ? LOONGSON2_THSENS_CTRL_LOW_REG : LOONGSON2_THSENS_CTRL_HI_REG;
+
+	reg_ctrl = ctrl_data + HECTO;
+	reg_ctrl |= enable ? 0x100 : 0;
+	writew(reg_ctrl, data->ctrl_reg + ctrl_reg + reg_off);
+}
+
 static int loongson2_thermal_set(struct loongson2_thermal_data *data,
-					int low, int high, bool enable)
+				 int low, int high, bool enable)
 {
-	u64 reg_ctrl = 0;
-	int reg_off = data->chip_data->thermal_sensor_sel * 2;
+	/* Set low temperature threshold */
+	loongson2_set_ctrl_regs(data, clamp(-40, low, high), true, enable);
 
-	low = clamp(-40, low, high);
-	high = clamp(125, low, high);
+	/* Set high temperature threshold */
+	loongson2_set_ctrl_regs(data, clamp(125, low, high), false, enable);
 
-	low += HECTO;
-	high += HECTO;
+	return 0;
+}
 
-	reg_ctrl = low;
-	reg_ctrl |= enable ? 0x100 : 0;
-	writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_LOW_REG + reg_off);
+static int loongson2_2k1000_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	int val;
+	struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
 
-	reg_ctrl = high;
-	reg_ctrl |= enable ? 0x100 : 0;
-	writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_HI_REG + reg_off);
+	val = readl(data->ctrl_reg + LOONGSON2_THSENS_OUT_REG);
+	*temp = ((val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO;
 
 	return 0;
 }
 
-static int loongson2_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+static int loongson2_2k2000_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	u32 reg_val;
+	int val;
 	struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
 
-	reg_val = readl(data->regs + LOONGSON2_THSENS_OUT_REG);
-	*temp = ((reg_val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO;
+	val = readl(data->temp_reg);
+	*temp = ((val & 0xffff) * 820 / 0x4000 - 311) * KILO;
 
 	return 0;
 }
@@ -75,8 +98,7 @@ static irqreturn_t loongson2_thermal_irq_thread(int irq, void *dev)
 	struct thermal_zone_device *tzd = dev;
 	struct loongson2_thermal_data *data = thermal_zone_device_priv(tzd);
 
-	writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs +
-		LOONGSON2_THSENS_STATUS_REG);
+	writeb(LOONGSON2_THSENS_INT_EN, data->ctrl_reg + LOONGSON2_THSENS_STATUS_REG);
 
 	thermal_zone_device_update(tzd, THERMAL_EVENT_UNSPECIFIED);
 
@@ -90,8 +112,8 @@ static int loongson2_thermal_set_trips(struct thermal_zone_device *tz, int low,
 	return loongson2_thermal_set(data, low/MILLI, high/MILLI, true);
 }
 
-static const struct thermal_zone_device_ops loongson2_of_thermal_ops = {
-	.get_temp = loongson2_thermal_get_temp,
+static struct thermal_zone_device_ops loongson2_of_thermal_ops = {
+	.get_temp = loongson2_2k1000_get_temp,
 	.set_trips = loongson2_thermal_set_trips,
 };
 
@@ -108,22 +130,30 @@ static int loongson2_thermal_probe(struct platform_device *pdev)
 
 	data->chip_data = device_get_match_data(dev);
 
-	data->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(data->regs))
-		return PTR_ERR(data->regs);
+	data->ctrl_reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->ctrl_reg))
+		return PTR_ERR(data->ctrl_reg);
+
+	/* The temperature output register is separate for Loongson-2K2000 */
+	if (data->chip_data->flags & LS2K2000_THSENS_OUT_FLAG) {
+		data->temp_reg = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(data->temp_reg))
+			return PTR_ERR(data->temp_reg);
+
+		loongson2_of_thermal_ops.get_temp = loongson2_2k2000_get_temp;
+	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 
-	writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs +
-		LOONGSON2_THSENS_STATUS_REG);
+	writeb(LOONGSON2_THSENS_INT_EN, data->ctrl_reg + LOONGSON2_THSENS_STATUS_REG);
 
 	loongson2_thermal_set(data, 0, 0, false);
 
 	for (i = 0; i <= LOONGSON2_MAX_SENSOR_SEL_NUM; i++) {
 		tzd = devm_thermal_of_zone_register(dev, i, data,
-			&loongson2_of_thermal_ops);
+						    &loongson2_of_thermal_ops);
 
 		if (!IS_ERR(tzd))
 			break;
@@ -135,7 +165,7 @@ static int loongson2_thermal_probe(struct platform_device *pdev)
 	}
 
 	ret = devm_request_threaded_irq(dev, irq, NULL, loongson2_thermal_irq_thread,
-			IRQF_ONESHOT, "loongson2_thermal", tzd);
+					IRQF_ONESHOT, "loongson2_thermal", tzd);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "failed to request alarm irq\n");
 
@@ -146,6 +176,12 @@ static int loongson2_thermal_probe(struct platform_device *pdev)
 
 static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k1000_data = {
 	.thermal_sensor_sel = 0,
+	.flags = 0,
+};
+
+static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k2000_data = {
+	.thermal_sensor_sel = 0,
+	.flags = LS2K2000_THSENS_OUT_FLAG,
 };
 
 static const struct of_device_id of_loongson2_thermal_match[] = {
@@ -153,6 +189,10 @@ static const struct of_device_id of_loongson2_thermal_match[] = {
 		.compatible = "loongson,ls2k1000-thermal",
 		.data = &loongson2_thermal_ls2k1000_data,
 	},
+	{
+		.compatible = "loongson,ls2k2000-thermal",
+		.data = &loongson2_thermal_ls2k2000_data,
+	},
 	{ /* end */ }
 };
 MODULE_DEVICE_TABLE(of, of_loongson2_thermal_match);
@@ -167,4 +207,5 @@ static struct platform_driver loongson2_thermal_driver = {
 module_platform_driver(loongson2_thermal_driver);
 
 MODULE_DESCRIPTION("Loongson2 thermal driver");
+MODULE_AUTHOR("Loongson Technology Corporation Limited");
 MODULE_LICENSE("GPL");