diff options
Diffstat (limited to 'drivers/thermal/mtk_thermal.c')
| -rw-r--r-- | drivers/thermal/mtk_thermal.c | 149 |
1 files changed, 135 insertions, 14 deletions
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 8440692e3890..3c633584a88e 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -150,6 +150,20 @@ #define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1) #define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1) +/* + * Layout of the fuses providing the calibration data + * These macros can be used for MT7981 and MT7986. + */ +#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff) +#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f) +#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f) +#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff) +#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff) +#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff) +#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1) +#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1) +#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1) + enum { VTS1, VTS2, @@ -163,6 +177,7 @@ enum { enum mtk_thermal_version { MTK_THERMAL_V1 = 1, MTK_THERMAL_V2, + MTK_THERMAL_V3, }; /* MT2701 thermal sensors */ @@ -245,6 +260,27 @@ enum mtk_thermal_version { /* The calibration coefficient of sensor */ #define MT8183_CALIBRATION 153 +/* AUXADC channel 11 is used for the temperature sensors */ +#define MT7986_TEMP_AUXADC_CHANNEL 11 + +/* The total number of temperature sensors in the MT7986 */ +#define MT7986_NUM_SENSORS 1 + +/* The number of banks in the MT7986 */ +#define MT7986_NUM_ZONES 1 + +/* The number of sensing points per bank */ +#define MT7986_NUM_SENSORS_PER_ZONE 1 + +/* MT7986 thermal sensors */ +#define MT7986_TS1 0 + +/* The number of controller in the MT7986 */ +#define MT7986_NUM_CONTROLLER 1 + +/* The calibration coefficient of sensor */ +#define MT7986_CALIBRATION 165 + struct mtk_thermal; struct thermal_bank_cfg { @@ -292,6 +328,8 @@ struct mtk_thermal { const struct mtk_thermal_data *conf; struct mtk_thermal_bank banks[MAX_NUM_ZONES]; + + int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw); }; /* MT8183 thermal sensor data */ @@ -386,6 +424,14 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, }; static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 }; static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, }; +/* MT7986 thermal sensor data */ +static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, }; +static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; +static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; +static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, }; +static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 }; +static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, }; + /* * The MT8173 thermal controller has four banks. Each bank can read up to * four temperature sensors simultaneously. The MT8173 has a total of 5 @@ -549,8 +595,32 @@ static const struct mtk_thermal_data mt8183_thermal_data = { .version = MTK_THERMAL_V1, }; +/* + * MT7986 uses AUXADC Channel 11 for raw data access. + */ +static const struct mtk_thermal_data mt7986_thermal_data = { + .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL, + .num_banks = MT7986_NUM_ZONES, + .num_sensors = MT7986_NUM_SENSORS, + .vts_index = mt7986_vts_index, + .cali_val = MT7986_CALIBRATION, + .num_controller = MT7986_NUM_CONTROLLER, + .controller_offset = mt7986_tc_offset, + .need_switch_bank = true, + .bank_data = { + { + .num_sensors = 1, + .sensors = mt7986_bank_data, + }, + }, + .msr = mt7986_msr, + .adcpnp = mt7986_adcpnp, + .sensor_mux_values = mt7986_mux_values, + .version = MTK_THERMAL_V3, +}; + /** - * raw_to_mcelsius - convert a raw ADC value to mcelsius + * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius * @mt: The thermal controller * @sensno: sensor number * @raw: raw ADC value @@ -603,6 +673,22 @@ static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw) return (format_2 - tmp) * 100; } +static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw) +{ + s32 tmp; + + if (raw == 0) + return 0; + + raw &= 0xfff; + tmp = 100000 * 15 / 16 * 10000; + tmp /= 4096 - 512 + mt->adc_ge; + tmp /= 1490; + tmp *= raw - mt->vts[sensno] - 2900; + + return mt->degc_cali * 500 - tmp; +} + /** * mtk_thermal_get_bank - get bank * @bank: The bank @@ -656,13 +742,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { raw = readl(mt->thermal_base + conf->msr[i]); - if (mt->conf->version == MTK_THERMAL_V1) { - temp = raw_to_mcelsius_v1( - mt, conf->bank_data[bank->id].sensors[i], raw); - } else { - temp = raw_to_mcelsius_v2( - mt, conf->bank_data[bank->id].sensors[i], raw); - } + temp = mt->raw_to_mcelsius( + mt, conf->bank_data[bank->id].sensors[i], raw); + /* * The first read of a sensor often contains very high bogus @@ -887,6 +969,25 @@ static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf) return 0; } +static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf) +{ + if (!CALIB_BUF1_VALID_V3(buf[1])) + return -EINVAL; + + mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]); + mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]); + mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]); + mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]); + mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]); + mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]); + mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]); + + if (CALIB_BUF1_ID_V3(buf[1]) == 0) + mt->o_slope = 0; + + return 0; +} + static int mtk_thermal_get_calibration_data(struct device *dev, struct mtk_thermal *mt) { @@ -897,6 +998,7 @@ static int mtk_thermal_get_calibration_data(struct device *dev, /* Start with default values */ mt->adc_ge = 512; + mt->adc_oe = 512; for (i = 0; i < mt->conf->num_sensors; i++) mt->vts[i] = 260; mt->degc_cali = 40; @@ -922,10 +1024,20 @@ static int mtk_thermal_get_calibration_data(struct device *dev, goto out; } - if (mt->conf->version == MTK_THERMAL_V1) + switch (mt->conf->version) { + case MTK_THERMAL_V1: ret = mtk_thermal_extract_efuse_v1(mt, buf); - else + break; + case MTK_THERMAL_V2: ret = mtk_thermal_extract_efuse_v2(mt, buf); + break; + case MTK_THERMAL_V3: + ret = mtk_thermal_extract_efuse_v3(mt, buf); + break; + default: + ret = -EINVAL; + break; + } if (ret) { dev_info(dev, "Device not calibrated, using default calibration values\n"); @@ -956,6 +1068,10 @@ static const struct of_device_id mtk_thermal_of_match[] = { .data = (void *)&mt7622_thermal_data, }, { + .compatible = "mediatek,mt7986-thermal", + .data = (void *)&mt7986_thermal_data, + }, + { .compatible = "mediatek,mt8183-thermal", .data = (void *)&mt8183_thermal_data, }, { @@ -990,7 +1106,6 @@ static int mtk_thermal_probe(struct platform_device *pdev) int ret, i, ctrl_id; struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; struct mtk_thermal *mt; - struct resource *res; u64 auxadc_phys_base, apmixed_phys_base; struct thermal_zone_device *tzdev; void __iomem *apmixed_base, *auxadc_base; @@ -1009,8 +1124,7 @@ static int mtk_thermal_probe(struct platform_device *pdev) if (IS_ERR(mt->clk_auxadc)) return PTR_ERR(mt->clk_auxadc); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mt->thermal_base = devm_ioremap_resource(&pdev->dev, res); + mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); if (IS_ERR(mt->thermal_base)) return PTR_ERR(mt->thermal_base); @@ -1070,11 +1184,18 @@ static int mtk_thermal_probe(struct platform_device *pdev) goto err_disable_clk_auxadc; } - if (mt->conf->version == MTK_THERMAL_V2) { + if (mt->conf->version != MTK_THERMAL_V1) { mtk_thermal_turn_on_buffer(apmixed_base); mtk_thermal_release_periodic_ts(mt, auxadc_base); } + if (mt->conf->version == MTK_THERMAL_V1) + mt->raw_to_mcelsius = raw_to_mcelsius_v1; + else if (mt->conf->version == MTK_THERMAL_V2) + mt->raw_to_mcelsius = raw_to_mcelsius_v2; + else + mt->raw_to_mcelsius = raw_to_mcelsius_v3; + for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) for (i = 0; i < mt->conf->num_banks; i++) mtk_thermal_init_bank(mt, i, apmixed_phys_base, |