1 files changed, 2 insertions, 360 deletions

diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 4f3d02c58c9e..984b5536e143 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -26,10 +26,6 @@ struct nvm_auth_status {
 	u32 status;
 };
 
-static bool clx_enabled = true;
-module_param_named(clx, clx_enabled, bool, 0444);
-MODULE_PARM_DESC(clx, "allow low power states on the high-speed lanes (default: true)");
-
 /*
  * Hold NVM authentication failure status per switch This information
  * needs to stay around even when the switch gets power cycled so we
@@ -1183,135 +1179,6 @@ int tb_port_update_credits(struct tb_port *port)
 	return tb_port_do_update_credits(port->dual_link_port);
 }
 
-static int __tb_port_pm_secondary_set(struct tb_port *port, bool secondary)
-{
-	u32 phy;
-	int ret;
-
-	ret = tb_port_read(port, &phy, TB_CFG_PORT,
-			   port->cap_phy + LANE_ADP_CS_1, 1);
-	if (ret)
-		return ret;
-
-	if (secondary)
-		phy |= LANE_ADP_CS_1_PMS;
-	else
-		phy &= ~LANE_ADP_CS_1_PMS;
-
-	return tb_port_write(port, &phy, TB_CFG_PORT,
-			     port->cap_phy + LANE_ADP_CS_1, 1);
-}
-
-static int tb_port_pm_secondary_enable(struct tb_port *port)
-{
-	return __tb_port_pm_secondary_set(port, true);
-}
-
-static int tb_port_pm_secondary_disable(struct tb_port *port)
-{
-	return __tb_port_pm_secondary_set(port, false);
-}
-
-/* Called for USB4 or Titan Ridge routers only */
-static bool tb_port_clx_supported(struct tb_port *port, unsigned int clx_mask)
-{
-	u32 val, mask = 0;
-	bool ret;
-
-	/* Don't enable CLx in case of two single-lane links */
-	if (!port->bonded && port->dual_link_port)
-		return false;
-
-	/* Don't enable CLx in case of inter-domain link */
-	if (port->xdomain)
-		return false;
-
-	if (tb_switch_is_usb4(port->sw)) {
-		if (!usb4_port_clx_supported(port))
-			return false;
-	} else if (!tb_lc_is_clx_supported(port)) {
-		return false;
-	}
-
-	if (clx_mask & TB_CL1) {
-		/* CL0s and CL1 are enabled and supported together */
-		mask |= LANE_ADP_CS_0_CL0S_SUPPORT | LANE_ADP_CS_0_CL1_SUPPORT;
-	}
-	if (clx_mask & TB_CL2)
-		mask |= LANE_ADP_CS_0_CL2_SUPPORT;
-
-	ret = tb_port_read(port, &val, TB_CFG_PORT,
-			   port->cap_phy + LANE_ADP_CS_0, 1);
-	if (ret)
-		return false;
-
-	return !!(val & mask);
-}
-
-static int __tb_port_clx_set(struct tb_port *port, enum tb_clx clx, bool enable)
-{
-	u32 phy, mask;
-	int ret;
-
-	/* CL0s and CL1 are enabled and supported together */
-	if (clx == TB_CL1)
-		mask = LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE;
-	else
-		/* For now we support only CL0s and CL1. Not CL2 */
-		return -EOPNOTSUPP;
-
-	ret = tb_port_read(port, &phy, TB_CFG_PORT,
-			   port->cap_phy + LANE_ADP_CS_1, 1);
-	if (ret)
-		return ret;
-
-	if (enable)
-		phy |= mask;
-	else
-		phy &= ~mask;
-
-	return tb_port_write(port, &phy, TB_CFG_PORT,
-			     port->cap_phy + LANE_ADP_CS_1, 1);
-}
-
-static int tb_port_clx_disable(struct tb_port *port, enum tb_clx clx)
-{
-	return __tb_port_clx_set(port, clx, false);
-}
-
-static int tb_port_clx_enable(struct tb_port *port, enum tb_clx clx)
-{
-	return __tb_port_clx_set(port, clx, true);
-}
-
-/**
- * tb_port_is_clx_enabled() - Is given CL state enabled
- * @port: USB4 port to check
- * @clx_mask: Mask of CL states to check
- *
- * Returns true if any of the given CL states is enabled for @port.
- */
-bool tb_port_is_clx_enabled(struct tb_port *port, unsigned int clx_mask)
-{
-	u32 val, mask = 0;
-	int ret;
-
-	if (!tb_port_clx_supported(port, clx_mask))
-		return false;
-
-	if (clx_mask & TB_CL1)
-		mask |= LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE;
-	if (clx_mask & TB_CL2)
-		mask |= LANE_ADP_CS_1_CL2_ENABLE;
-
-	ret = tb_port_read(port, &val, TB_CFG_PORT,
-			   port->cap_phy + LANE_ADP_CS_1, 1);
-	if (ret)
-		return false;
-
-	return !!(val & mask);
-}
-
 static int tb_port_start_lane_initialization(struct tb_port *port)
 {
 	int ret;
@@ -3246,8 +3113,8 @@ void tb_switch_suspend(struct tb_switch *sw, bool runtime)
 	 * done for USB4 device too as CLx is re-enabled at resume.
 	 * CL0s and CL1 are enabled and supported together.
 	 */
-	if (tb_switch_is_clx_enabled(sw, TB_CL1)) {
-		if (tb_switch_disable_clx(sw, TB_CL1))
+	if (tb_switch_clx_is_enabled(sw, TB_CL1)) {
+		if (tb_switch_clx_disable(sw, TB_CL1))
 			tb_sw_warn(sw, "failed to disable %s on upstream port\n",
 				   tb_switch_clx_name(TB_CL1));
 	}
@@ -3472,231 +3339,6 @@ struct tb_port *tb_switch_find_port(struct tb_switch *sw,
 	return NULL;
 }
 
-static int tb_switch_pm_secondary_resolve(struct tb_switch *sw)
-{
-	struct tb_port *up, *down;
-	int ret;
-
-	if (!tb_route(sw))
-		return 0;
-
-	up = tb_upstream_port(sw);
-	down = tb_switch_downstream_port(sw);
-	ret = tb_port_pm_secondary_enable(up);
-	if (ret)
-		return ret;
-
-	return tb_port_pm_secondary_disable(down);
-}
-
-static int __tb_switch_enable_clx(struct tb_switch *sw, enum tb_clx clx)
-{
-	bool up_clx_support, down_clx_support;
-	struct tb_port *up, *down;
-	int ret;
-
-	if (!tb_switch_is_clx_supported(sw))
-		return 0;
-
-	/*
-	 * Enable CLx for host router's downstream port as part of the
-	 * downstream router enabling procedure.
-	 */
-	if (!tb_route(sw))
-		return 0;
-
-	/* Enable CLx only for first hop router (depth = 1) */
-	if (tb_route(tb_switch_parent(sw)))
-		return 0;
-
-	ret = tb_switch_pm_secondary_resolve(sw);
-	if (ret)
-		return ret;
-
-	up = tb_upstream_port(sw);
-	down = tb_switch_downstream_port(sw);
-
-	up_clx_support = tb_port_clx_supported(up, clx);
-	down_clx_support = tb_port_clx_supported(down, clx);
-
-	tb_port_dbg(up, "%s %ssupported\n", tb_switch_clx_name(clx),
-		    up_clx_support ? "" : "not ");
-	tb_port_dbg(down, "%s %ssupported\n", tb_switch_clx_name(clx),
-		    down_clx_support ? "" : "not ");
-
-	if (!up_clx_support || !down_clx_support)
-		return -EOPNOTSUPP;
-
-	ret = tb_port_clx_enable(up, clx);
-	if (ret)
-		return ret;
-
-	ret = tb_port_clx_enable(down, clx);
-	if (ret) {
-		tb_port_clx_disable(up, clx);
-		return ret;
-	}
-
-	ret = tb_switch_mask_clx_objections(sw);
-	if (ret) {
-		tb_port_clx_disable(up, clx);
-		tb_port_clx_disable(down, clx);
-		return ret;
-	}
-
-	sw->clx = clx;
-
-	tb_port_dbg(up, "%s enabled\n", tb_switch_clx_name(clx));
-	return 0;
-}
-
-/**
- * tb_switch_enable_clx() - Enable CLx on upstream port of specified router
- * @sw: Router to enable CLx for
- * @clx: The CLx state to enable
- *
- * Enable CLx state only for first hop router. That is the most common
- * use-case, that is intended for better thermal management, and so helps
- * to improve performance. CLx is enabled only if both sides of the link
- * support CLx, and if both sides of the link are not configured as two
- * single lane links and only if the link is not inter-domain link. The
- * complete set of conditions is described in CM Guide 1.0 section 8.1.
- *
- * Return: Returns 0 on success or an error code on failure.
- */
-int tb_switch_enable_clx(struct tb_switch *sw, enum tb_clx clx)
-{
-	struct tb_switch *root_sw = sw->tb->root_switch;
-
-	if (!clx_enabled)
-		return 0;
-
-	/*
-	 * CLx is not enabled and validated on Intel USB4 platforms before
-	 * Alder Lake.
-	 */
-	if (root_sw->generation < 4 || tb_switch_is_tiger_lake(root_sw))
-		return 0;
-
-	switch (clx) {
-	case TB_CL1:
-		/* CL0s and CL1 are enabled and supported together */
-		return __tb_switch_enable_clx(sw, clx);
-
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static int __tb_switch_disable_clx(struct tb_switch *sw, enum tb_clx clx)
-{
-	struct tb_port *up, *down;
-	int ret;
-
-	if (!tb_switch_is_clx_supported(sw))
-		return 0;
-
-	/*
-	 * Disable CLx for host router's downstream port as part of the
-	 * downstream router enabling procedure.
-	 */
-	if (!tb_route(sw))
-		return 0;
-
-	/* Disable CLx only for first hop router (depth = 1) */
-	if (tb_route(tb_switch_parent(sw)))
-		return 0;
-
-	up = tb_upstream_port(sw);
-	down = tb_switch_downstream_port(sw);
-	ret = tb_port_clx_disable(up, clx);
-	if (ret)
-		return ret;
-
-	ret = tb_port_clx_disable(down, clx);
-	if (ret)
-		return ret;
-
-	sw->clx = TB_CLX_DISABLE;
-
-	tb_port_dbg(up, "%s disabled\n", tb_switch_clx_name(clx));
-	return 0;
-}
-
-/**
- * tb_switch_disable_clx() - Disable CLx on upstream port of specified router
- * @sw: Router to disable CLx for
- * @clx: The CLx state to disable
- *
- * Return: Returns 0 on success or an error code on failure.
- */
-int tb_switch_disable_clx(struct tb_switch *sw, enum tb_clx clx)
-{
-	if (!clx_enabled)
-		return 0;
-
-	switch (clx) {
-	case TB_CL1:
-		/* CL0s and CL1 are enabled and supported together */
-		return __tb_switch_disable_clx(sw, clx);
-
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-/**
- * tb_switch_mask_clx_objections() - Mask CLx objections for a router
- * @sw: Router to mask objections for
- *
- * Mask the objections coming from the second depth routers in order to
- * stop these objections from interfering with the CLx states of the first
- * depth link.
- */
-int tb_switch_mask_clx_objections(struct tb_switch *sw)
-{
-	int up_port = sw->config.upstream_port_number;
-	u32 offset, val[2], mask_obj, unmask_obj;
-	int ret, i;
-
-	/* Only Titan Ridge of pre-USB4 devices support CLx states */
-	if (!tb_switch_is_titan_ridge(sw))
-		return 0;
-
-	if (!tb_route(sw))
-		return 0;
-
-	/*
-	 * In Titan Ridge there are only 2 dual-lane Thunderbolt ports:
-	 * Port A consists of lane adapters 1,2 and
-	 * Port B consists of lane adapters 3,4
-	 * If upstream port is A, (lanes are 1,2), we mask objections from
-	 * port B (lanes 3,4) and unmask objections from Port A and vice-versa.
-	 */
-	if (up_port == 1) {
-		mask_obj = TB_LOW_PWR_C0_PORT_B_MASK;
-		unmask_obj = TB_LOW_PWR_C1_PORT_A_MASK;
-		offset = TB_LOW_PWR_C1_CL1;
-	} else {
-		mask_obj = TB_LOW_PWR_C1_PORT_A_MASK;
-		unmask_obj = TB_LOW_PWR_C0_PORT_B_MASK;
-		offset = TB_LOW_PWR_C3_CL1;
-	}
-
-	ret = tb_sw_read(sw, &val, TB_CFG_SWITCH,
-			 sw->cap_lp + offset, ARRAY_SIZE(val));
-	if (ret)
-		return ret;
-
-	for (i = 0; i < ARRAY_SIZE(val); i++) {
-		val[i] |= mask_obj;
-		val[i] &= ~unmask_obj;
-	}
-
-	return tb_sw_write(sw, &val, TB_CFG_SWITCH,
-			   sw->cap_lp + offset, ARRAY_SIZE(val));
-}
-
 /*
  * Can be used for read/write a specified PCIe bridge for any Thunderbolt 3
  * device. For now used only for Titan Ridge.