summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/8250/8250_omap.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250/8250_omap.c')
-rw-r--r--drivers/tty/serial/8250/8250_omap.c114
1 files changed, 75 insertions, 39 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index ca972fd37725..2d42f485c987 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -8,6 +8,7 @@
*
*/
+#include <linux/atomic.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/io.h>
@@ -27,6 +28,7 @@
#include <linux/pm_wakeirq.h>
#include <linux/dma-mapping.h>
#include <linux/sys_soc.h>
+#include <linux/pm_domain.h>
#include "8250.h"
@@ -114,6 +116,12 @@
/* RX FIFO occupancy indicator */
#define UART_OMAP_RX_LVL 0x19
+/*
+ * Copy of the genpd flags for the console.
+ * Only used if console suspend is disabled
+ */
+static unsigned int genpd_flags_console;
+
struct omap8250_priv {
void __iomem *membase;
int line;
@@ -130,6 +138,7 @@ struct omap8250_priv {
u8 tx_trigger;
u8 rx_trigger;
+ atomic_t active;
bool is_suspending;
int wakeirq;
int wakeups_enabled;
@@ -401,7 +410,7 @@ static void omap_8250_set_termios(struct uart_port *port,
* interrupts disabled.
*/
pm_runtime_get_sync(port->dev);
- spin_lock_irq(&port->lock);
+ uart_port_lock_irq(port);
/*
* Update the per-port timeout.
@@ -504,7 +513,7 @@ static void omap_8250_set_termios(struct uart_port *port,
}
omap8250_restore_regs(up);
- spin_unlock_irq(&up->port.lock);
+ uart_port_unlock_irq(&up->port);
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
@@ -529,7 +538,7 @@ static void omap_8250_pm(struct uart_port *port, unsigned int state,
pm_runtime_get_sync(port->dev);
/* Synchronize UART_IER access against the console. */
- spin_lock_irq(&port->lock);
+ uart_port_lock_irq(port);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
efr = serial_in(up, UART_EFR);
@@ -541,7 +550,7 @@ static void omap_8250_pm(struct uart_port *port, unsigned int state,
serial_out(up, UART_EFR, efr);
serial_out(up, UART_LCR, 0);
- spin_unlock_irq(&port->lock);
+ uart_port_unlock_irq(port);
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
@@ -632,14 +641,23 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
unsigned int iir, lsr;
int ret;
+ pm_runtime_get_noresume(port->dev);
+
+ /* Shallow idle state wake-up to an IO interrupt? */
+ if (atomic_add_unless(&priv->active, 1, 1)) {
+ priv->latency = priv->calc_latency;
+ schedule_work(&priv->qos_work);
+ }
+
#ifdef CONFIG_SERIAL_8250_DMA
if (up->dma) {
ret = omap_8250_dma_handle_irq(port);
+ pm_runtime_mark_last_busy(port->dev);
+ pm_runtime_put(port->dev);
return IRQ_RETVAL(ret);
}
#endif
- serial8250_rpm_get(up);
lsr = serial_port_in(port, UART_LSR);
iir = serial_port_in(port, UART_IIR);
ret = serial8250_handle_irq(port, iir);
@@ -660,7 +678,7 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
unsigned long delay;
/* Synchronize UART_IER access against the console. */
- spin_lock(&port->lock);
+ uart_port_lock(port);
up->ier = port->serial_in(port, UART_IER);
if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
port->ops->stop_rx(port);
@@ -670,13 +688,14 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
*/
cancel_delayed_work(&up->overrun_backoff);
}
- spin_unlock(&port->lock);
+ uart_port_unlock(port);
delay = msecs_to_jiffies(up->overrun_backoff_time_ms);
schedule_delayed_work(&up->overrun_backoff, delay);
}
- serial8250_rpm_put(up);
+ pm_runtime_mark_last_busy(port->dev);
+ pm_runtime_put(port->dev);
return IRQ_RETVAL(ret);
}
@@ -717,10 +736,10 @@ static int omap_8250_startup(struct uart_port *port)
}
/* Synchronize UART_IER access against the console. */
- spin_lock_irq(&port->lock);
+ uart_port_lock_irq(port);
up->ier = UART_IER_RLSI | UART_IER_RDI;
serial_out(up, UART_IER, up->ier);
- spin_unlock_irq(&port->lock);
+ uart_port_unlock_irq(port);
#ifdef CONFIG_PM
up->capabilities |= UART_CAP_RPM;
@@ -733,9 +752,9 @@ static int omap_8250_startup(struct uart_port *port)
serial_out(up, UART_OMAP_WER, priv->wer);
if (up->dma && !(priv->habit & UART_HAS_EFR2)) {
- spin_lock_irq(&port->lock);
+ uart_port_lock_irq(port);
up->dma->rx_dma(up);
- spin_unlock_irq(&port->lock);
+ uart_port_unlock_irq(port);
}
enable_irq(up->port.irq);
@@ -761,10 +780,10 @@ static void omap_8250_shutdown(struct uart_port *port)
serial_out(up, UART_OMAP_EFR2, 0x0);
/* Synchronize UART_IER access against the console. */
- spin_lock_irq(&port->lock);
+ uart_port_lock_irq(port);
up->ier = 0;
serial_out(up, UART_IER, 0);
- spin_unlock_irq(&port->lock);
+ uart_port_unlock_irq(port);
disable_irq_nosync(up->port.irq);
dev_pm_clear_wake_irq(port->dev);
@@ -789,10 +808,10 @@ static void omap_8250_throttle(struct uart_port *port)
pm_runtime_get_sync(port->dev);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
port->ops->stop_rx(port);
priv->throttled = true;
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
@@ -807,14 +826,14 @@ static void omap_8250_unthrottle(struct uart_port *port)
pm_runtime_get_sync(port->dev);
/* Synchronize UART_IER access against the console. */
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
priv->throttled = false;
if (up->dma)
up->dma->rx_dma(up);
up->ier |= UART_IER_RLSI | UART_IER_RDI;
port->read_status_mask |= UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
@@ -958,7 +977,7 @@ static void __dma_rx_complete(void *param)
unsigned long flags;
/* Synchronize UART_IER access against the console. */
- spin_lock_irqsave(&p->port.lock, flags);
+ uart_port_lock_irqsave(&p->port, &flags);
/*
* If the tx status is not DMA_COMPLETE, then this is a delayed
@@ -967,7 +986,7 @@ static void __dma_rx_complete(void *param)
*/
if (dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state) !=
DMA_COMPLETE) {
- spin_unlock_irqrestore(&p->port.lock, flags);
+ uart_port_unlock_irqrestore(&p->port, flags);
return;
}
__dma_rx_do_complete(p);
@@ -978,7 +997,7 @@ static void __dma_rx_complete(void *param)
omap_8250_rx_dma(p);
}
- spin_unlock_irqrestore(&p->port.lock, flags);
+ uart_port_unlock_irqrestore(&p->port, flags);
}
static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
@@ -1083,7 +1102,7 @@ static void omap_8250_dma_tx_complete(void *param)
dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr,
UART_XMIT_SIZE, DMA_TO_DEVICE);
- spin_lock_irqsave(&p->port.lock, flags);
+ uart_port_lock_irqsave(&p->port, &flags);
dma->tx_running = 0;
@@ -1112,7 +1131,7 @@ static void omap_8250_dma_tx_complete(void *param)
serial8250_set_THRI(p);
}
- spin_unlock_irqrestore(&p->port.lock, flags);
+ uart_port_unlock_irqrestore(&p->port, flags);
}
static int omap_8250_tx_dma(struct uart_8250_port *p)
@@ -1270,15 +1289,12 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
u16 status;
u8 iir;
- serial8250_rpm_get(up);
-
iir = serial_port_in(port, UART_IIR);
if (iir & UART_IIR_NO_INT) {
- serial8250_rpm_put(up);
return IRQ_HANDLED;
}
- spin_lock(&port->lock);
+ uart_port_lock(port);
status = serial_port_in(port, UART_LSR);
@@ -1305,7 +1321,6 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
uart_unlock_and_check_sysrq(port);
- serial8250_rpm_put(up);
return 1;
}
@@ -1503,8 +1518,6 @@ static int omap8250_probe(struct platform_device *pdev)
if (!of_get_available_child_count(pdev->dev.of_node))
pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
- pm_runtime_irq_safe(&pdev->dev);
-
pm_runtime_get_sync(&pdev->dev);
omap_serial_fill_features_erratas(&up, priv);
@@ -1617,6 +1630,7 @@ static int omap8250_suspend(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
struct uart_8250_port *up = serial8250_get_port(priv->line);
+ struct generic_pm_domain *genpd = pd_to_genpd(dev->pm_domain);
int err = 0;
serial8250_suspend_port(priv->line);
@@ -1627,8 +1641,19 @@ static int omap8250_suspend(struct device *dev)
if (!device_may_wakeup(dev))
priv->wer = 0;
serial_out(up, UART_OMAP_WER, priv->wer);
- if (uart_console(&up->port) && console_suspend_enabled)
- err = pm_runtime_force_suspend(dev);
+ if (uart_console(&up->port)) {
+ if (console_suspend_enabled)
+ err = pm_runtime_force_suspend(dev);
+ else {
+ /*
+ * The pd shall not be powered-off (no console suspend).
+ * Make copy of genpd flags before to set it always on.
+ * The original value is restored during the resume.
+ */
+ genpd_flags_console = genpd->flags;
+ genpd->flags |= GENPD_FLAG_ALWAYS_ON;
+ }
+ }
flush_work(&priv->qos_work);
return err;
@@ -1638,12 +1663,16 @@ static int omap8250_resume(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
struct uart_8250_port *up = serial8250_get_port(priv->line);
+ struct generic_pm_domain *genpd = pd_to_genpd(dev->pm_domain);
int err;
if (uart_console(&up->port) && console_suspend_enabled) {
- err = pm_runtime_force_resume(dev);
- if (err)
- return err;
+ if (console_suspend_enabled) {
+ err = pm_runtime_force_resume(dev);
+ if (err)
+ return err;
+ } else
+ genpd->flags = genpd_flags_console;
}
serial8250_resume_port(priv->line);
@@ -1743,6 +1772,7 @@ static int omap8250_runtime_suspend(struct device *dev)
priv->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE;
schedule_work(&priv->qos_work);
+ atomic_set(&priv->active, 0);
return 0;
}
@@ -1752,23 +1782,29 @@ static int omap8250_runtime_resume(struct device *dev)
struct omap8250_priv *priv = dev_get_drvdata(dev);
struct uart_8250_port *up = NULL;
+ /* Did the hardware wake to a device IO interrupt before a wakeirq? */
+ if (atomic_read(&priv->active))
+ return 0;
+
if (priv->line >= 0)
up = serial8250_get_port(priv->line);
if (up && omap8250_lost_context(up)) {
- spin_lock_irq(&up->port.lock);
+ uart_port_lock_irq(&up->port);
omap8250_restore_regs(up);
- spin_unlock_irq(&up->port.lock);
+ uart_port_unlock_irq(&up->port);
}
if (up && up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2)) {
- spin_lock_irq(&up->port.lock);
+ uart_port_lock_irq(&up->port);
omap_8250_rx_dma(up);
- spin_unlock_irq(&up->port.lock);
+ uart_port_unlock_irq(&up->port);
}
+ atomic_set(&priv->active, 1);
priv->latency = priv->calc_latency;
schedule_work(&priv->qos_work);
+
return 0;
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-13 08:44:08 +0300