diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_port.c')
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 32 |
1 files changed, 28 insertions, 4 deletions
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index c13fec451d03..6119516ef5fc 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -45,6 +45,12 @@ #include "8250.h" /* + * These are definitions for the Exar XR17V35X and XR17(C|D)15X + */ +#define UART_EXAR_SLEEP 0x8b /* Sleep mode */ +#define UART_EXAR_DVID 0x8d /* Device identification */ + +/* * Debugging. */ #if 0 @@ -273,6 +279,15 @@ static const struct serial8250_config uart_config[] = { .rxtrig_bytes = {1, 4, 8, 14}, .flags = UART_CAP_FIFO, }, + [PORT_DA830] = { + .name = "TI DA8xx/66AK2x", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO | + UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, }; /* Uart divisor latch read */ @@ -1753,8 +1768,6 @@ void serial8250_tx_chars(struct uart_8250_port *up) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - pr_debug("%s: THRE\n", __func__); - /* * With RPM enabled, we have to wait until the FIFO is empty before the * HW can go idle. So we get here once again with empty FIFO and disable @@ -1819,8 +1832,6 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) status = serial_port_in(port, UART_LSR); - pr_debug("%s: status = %x\n", __func__, status); - if (status & (UART_LSR_DR | UART_LSR_BI)) { if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status); @@ -2118,6 +2129,19 @@ int serial8250_do_startup(struct uart_port *port) serial_port_out(port, UART_LCR, 0); } + if (port->type == PORT_DA830) { + /* Reset the port */ + serial_port_out(port, UART_IER, 0); + serial_port_out(port, UART_DA830_PWREMU_MGMT, 0); + mdelay(10); + + /* Enable Tx, Rx and free run mode */ + serial_port_out(port, UART_DA830_PWREMU_MGMT, + UART_DA830_PWREMU_MGMT_UTRST | + UART_DA830_PWREMU_MGMT_URRST | + UART_DA830_PWREMU_MGMT_FREE); + } + #ifdef CONFIG_SERIAL_8250_RSA /* * If this is an RSA port, see if we can kick it up to the |