summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/amba-pl011.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/amba-pl011.c')
-rw-r--r--drivers/tty/serial/amba-pl011.c70
1 files changed, 61 insertions, 9 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d4171d71a258..8789ea423ccf 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -97,6 +97,7 @@ struct vendor_data {
unsigned int fr_dsr;
unsigned int fr_cts;
unsigned int fr_ri;
+ unsigned int inv_fr;
bool access_32b;
bool oversampling;
bool dma_threshold;
@@ -141,6 +142,30 @@ static struct vendor_data vendor_sbsa = {
.fixed_options = true,
};
+/*
+ * Erratum 44 for QDF2432v1 and QDF2400v1 SoCs describes the BUSY bit as
+ * occasionally getting stuck as 1. To avoid the potential for a hang, check
+ * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
+ * implementations, so only do so if an affected platform is detected in
+ * parse_spcr().
+ */
+static bool qdf2400_e44_present = false;
+
+static struct vendor_data vendor_qdt_qdf2400_e44 = {
+ .reg_offset = pl011_std_offsets,
+ .fr_busy = UART011_FR_TXFE,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
+ .inv_fr = UART011_FR_TXFE,
+ .access_32b = true,
+ .oversampling = false,
+ .dma_threshold = false,
+ .cts_event_workaround = false,
+ .always_enabled = true,
+ .fixed_options = true,
+};
+
static u16 pl011_st_offsets[REG_ARRAY_SIZE] = {
[REG_DR] = UART01x_DR,
[REG_ST_DMAWM] = ST_UART011_DMAWM,
@@ -1518,7 +1543,10 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
- unsigned int status = pl011_read(uap, REG_FR);
+
+ /* Allow feature register bits to be inverted to work around errata */
+ unsigned int status = pl011_read(uap, REG_FR) ^ uap->vendor->inv_fr;
+
return status & (uap->vendor->fr_busy | UART01x_FR_TXFF) ?
0 : TIOCSER_TEMT;
}
@@ -2114,7 +2142,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
return ret;
}
-static struct uart_ops amba_pl011_pops = {
+static const struct uart_ops amba_pl011_pops = {
.tx_empty = pl011_tx_empty,
.set_mctrl = pl011_set_mctrl,
.get_mctrl = pl011_get_mctrl,
@@ -2215,10 +2243,12 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
uart_console_write(&uap->port, s, count, pl011_console_putchar);
/*
- * Finally, wait for transmitter to become empty
- * and restore the TCR
+ * Finally, wait for transmitter to become empty and restore the
+ * TCR. Allow feature register bits to be inverted to work around
+ * errata.
*/
- while (pl011_read(uap, REG_FR) & uap->vendor->fr_busy)
+ while ((pl011_read(uap, REG_FR) ^ uap->vendor->inv_fr)
+ & uap->vendor->fr_busy)
cpu_relax();
if (!uap->vendor->always_enabled)
pl011_write(old_cr, uap, REG_CR);
@@ -2340,8 +2370,12 @@ static int __init pl011_console_match(struct console *co, char *name, int idx,
resource_size_t addr;
int i;
- if (strcmp(name, "pl011") != 0)
+ if (strcmp(name, "qdf2400_e44") == 0) {
+ pr_info_once("UART: Working around QDF2400 SoC erratum 44");
+ qdf2400_e44_present = true;
+ } else if (strcmp(name, "pl011") != 0 || strcmp(name, "ttyAMA") != 0) {
return -ENODEV;
+ }
if (uart_parse_earlycon(options, &iotype, &addr, &options))
return -ENODEV;
@@ -2376,13 +2410,29 @@ static struct console amba_console = {
.device = uart_console_device,
.setup = pl011_console_setup,
.match = pl011_console_match,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME,
.index = -1,
.data = &amba_reg,
};
#define AMBA_CONSOLE (&amba_console)
+static void qdf2400_e44_putc(struct uart_port *port, int c)
+{
+ while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
+ cpu_relax();
+ writel(c, port->membase + UART01x_DR);
+ while (!(readl(port->membase + UART01x_FR) & UART011_FR_TXFE))
+ cpu_relax();
+}
+
+static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, qdf2400_e44_putc);
+}
+
static void pl011_putc(struct uart_port *port, int c)
{
while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
@@ -2408,7 +2458,8 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
if (!device->port.membase)
return -ENODEV;
- device->con->write = pl011_early_write;
+ device->con->write = qdf2400_e44_present ?
+ qdf2400_e44_early_write : pl011_early_write;
return 0;
}
OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
@@ -2645,7 +2696,8 @@ static int sbsa_uart_probe(struct platform_device *pdev)
uap->port.irq = ret;
uap->reg_offset = vendor_sbsa.reg_offset;
- uap->vendor = &vendor_sbsa;
+ uap->vendor = qdf2400_e44_present ?
+ &vendor_qdt_qdf2400_e44 : &vendor_sbsa;
uap->fifosize = 32;
uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM;
uap->port.ops = &sbsa_uart_pops;